1 #
2 # Copyright (c) 2011, 2012, Oracle and/or its affiliates. All rights reserved.
3 # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
4 #
5 # This code is free software; you can redistribute it and/or modify it
6 # under the terms of the GNU General Public License version 2 only, as
7 # published by the Free Software Foundation. Oracle designates this
8 # particular file as subject to the "Classpath" exception as provided
9 # by Oracle in the LICENSE file that accompanied this code.
10 #
11 # This code is distributed in the hope that it will be useful, but WITHOUT
12 # ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
13 # FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
14 # version 2 for more details (a copy is included in the LICENSE file that
15 # accompanied this code).
16 #
17 # You should have received a copy of the GNU General Public License version
18 # 2 along with this work; if not, write to the Free Software Foundation,
19 # Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
20 #
21 # Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
22 # or visit www.oracle.com if you need additional information or have any
23 # questions.
24 #
25
26 ################################################################
27 #
28 # Check that GNU make and cygwin are recent enough.
29 # Setup common utility functions.
30 #
31 ################################################################
32
33 ifndef _MAKEBASE_GMK
34 _MAKEBASE_GMK := 1
35
36 ifeq (,$(findstring 3.81,$(MAKE_VERSION)))
37 ifeq (,$(findstring 3.82,$(MAKE_VERSION)))
38 $(error This version of GNU Make is too low ($(MAKE_VERSION)). Please upgrade to 3.81 or newer.)
39 endif
40 endif
41
42 ifneq (,$(CYGPATH))
43 # Cygwin styff, if needed but most is going to be
44 # done in configure!
45 ifeq (yes,$(CHECK_FOR_VCINSTALLDIR))
46 ifeq (,$(VCINSTALLDIR))
47 $(info Could not find compiler paths!)
48 $(info You probably configured the build from within a)
49 $(info VS command prompt, but you are not using such a)
50 $(info prompt right now.)
51 $(info If you instead run configure from a plain cygwin shell, it)
52 $(info will attempt to setup VS for you! Please try that.)
53 $(error Giving up for now.)
54 endif
55 endif
56 endif
57
58 # The build times report is turned off by setting REPORT_BUILD_TIMES to nothing.
59 # This is necessary for the target clean which will erase the
60 # directories where the buildtimes are stored.
61 REPORT_BUILD_TIMES=1
62 # Store the build times in this directory.
63 BUILDTIMESDIR=$(OUTPUT_ROOT)/tmp/buildtimes
64
65 # Record starting time for build of a sub repository.
66 define RecordStartTime
67 $(MKDIR) -p $(BUILDTIMESDIR)
68 $(DATE) '+%Y %m %d %H %M %S' | $(NAWK) '{ print $$1,$$2,$$3,$$4,$$5,$$6,($$4*3600+$$5*60+$$6) }' > $(BUILDTIMESDIR)/build_time_start_$1
69 $(DATE) '+%Y-%m-%d %H:%M:%S' > $(BUILDTIMESDIR)/build_time_start_$1_human_readable
70 endef
71
72 # Indicate that we started to build a sub repository and record starting time.
73 define MakeStart
74 $(call RecordStartTime,$1)
75 $(BUILD_LOG_WRAPPER) $(PRINTF) "\n\n%s\n%s\n##### %-60.60s #####\n%s\n\n" \
76 "########################################################################" \
77 "########################################################################" \
78 "Entering $1 for target(s) $2" \
79 "########################################################################"
80 endef
81
82 # Record ending time and calculate the difference and store it in a
83 # easy to read format. Handles builds that cross midnight. Expects
84 # that a build will never take 24 hours or more.
85 define RecordEndTime
86 $(DATE) '+%Y %m %d %H %M %S' | $(NAWK) '{ print $$1,$$2,$$3,$$4,$$5,$$6,($$4*3600+$$5*60+$$6) }' > $(BUILDTIMESDIR)/build_time_end_$1
87 $(DATE) '+%Y-%m-%d %H:%M:%S' > $(BUILDTIMESDIR)/build_time_end_$1_human_readable
88 $(ECHO) `$(CAT) $(BUILDTIMESDIR)/build_time_start_$1` `$(CAT) $(BUILDTIMESDIR)/build_time_end_$1` $1 | \
89 $(NAWK) '{ F=$$7; T=$$14; if (F > T) { T+=3600*24 }; D=T-F; H=int(D/3600); \
90 M=int((D-H*3600)/60); S=D-H*3600-M*60; printf("%02d:%02d:%02d %s\n",H,M,S,$$15); }' \
91 > $(BUILDTIMESDIR)/build_time_diff_$1
92 endef
93
94 # Indicate that we are done.
95 # Record ending time and print out the total time it took to build.
96 define MakeFinish
97 $(if $(REPORT_BUILD_TIMES),$(call RecordEndTime,$1),)
98 $(BUILD_LOG_WRAPPER) $(PRINTF) "%s\n##### %-60.60s #####\n%s\n##### %-60.60s #####\n%s\n\n" \
99 "########################################################################" \
100 "Leaving $1 for target(s) $2" \
101 "########################################################################" \
102 $(if $(REPORT_BUILD_TIMES),"Build time `$(CAT) $(BUILDTIMESDIR)/build_time_diff_$1` for target(s) $2","") \
103 "########################################################################"
104 endef
105
106 # Find all build_time_* files and print their contents in a list sorted
107 # on the name of the sub repository.
108 define ReportBuildTimes
109 $(BUILD_LOG_WRAPPER) $(PRINTF) -- "-- Build times ----------\nTarget %s\nStart %s\nEnd %s\n%s\n%s\n-------------------------\n" \
110 "$1" \
111 "`$(CAT) $(BUILDTIMESDIR)/build_time_start_TOTAL_human_readable`" \
112 "`$(CAT) $(BUILDTIMESDIR)/build_time_end_TOTAL_human_readable`" \
113 "`$(LS) $(BUILDTIMESDIR)/build_time_diff_* | $(GREP) -v _TOTAL | $(XARGS) $(CAT) | $(SORT) -k 2`" \
114 "`$(CAT) $(BUILDTIMESDIR)/build_time_diff_TOTAL`"
115 endef
116
117 define ResetTimers
118 $$(shell $(MKDIR) -p $(BUILDTIMESDIR) && $(RM) $(BUILDTIMESDIR)/build_time_*)
119 endef
120
121 define StartTimer
122 $(call RecordStartTime,TOTAL)
123 endef
124
125 define StopTimer
126 $(if $(REPORT_BUILD_TIMES),$(call RecordEndTime,TOTAL) && $(call ReportBuildTimes,$1),)
127 endef
128
129 # If the variable that you want to send to stdout for piping into a file or otherwise,
130 # is potentially long, for example the a list of file paths, eg a list of all package directories.
131 # Then you need to use ListPathsSafely, which optimistically splits the output into several shell
132 # calls as well as use compression on recurrent file paths segments, to get around the potential
133 # command line length problem that exists in cygwin and other shells.
134 compress_pre:=$(strip $(shell cat $(SRC_ROOT)/common/makefiles/compress.pre))
135 compress_post:=$(strip $(shell cat $(SRC_ROOT)/common/makefiles/compress.post))
136 compress_paths=$(compress_pre)\
137 $(subst $(SRC_ROOT),X97,\
138 $(subst $(OUTPUT_ROOT),X98,\
139 $(subst X,X00,\
140 $(subst $(SPACE),\n,$(strip $1)))))\
141 $(compress_post)
142
143 decompress_paths=sed -f $(SRC_ROOT)/common/makefiles/uncompress.sed -e 's|X99|\\n|g' \
144 -e 's|X98|$(OUTPUT_ROOT)|g' -e 's|X97|$(SRC_ROOT)|g' \
145 -e 's|X00|X|g' | tr '\n' '$2'
146
147 define ListPathsSafely_If
148 $(if $(word $3,$($1)),$(eval $1_LPS$3:=$(call compress_paths,$(wordlist $3,$4,$($1)))))
149 endef
150
151 define ListPathsSafely_Printf
152 $(if $(strip $($1_LPS$4)),printf -- "$(strip $($1_LPS$4))\n" | $(decompress_paths) $3)
153 endef
154
155 # Receipt example:
156 # rm -f thepaths
157 # $(call ListPathsSafely,THEPATHS,\n, >> thepaths)
158 # The \n argument means translate spaces into \n
159 # if instead , , (a space) is supplied, then spaces remain spaces.
160 define ListPathsSafely
161 $(if $(word 10001,$($1)),$(error Cannot list safely more than 10000 paths. $1 has $(words $($1)) paths!))
162 $(call ListPathsSafely_If,$1,$2,1,250)
163 $(call ListPathsSafely_If,$1,$2,251,500)
164 $(call ListPathsSafely_If,$1,$2,501,750)
165 $(call ListPathsSafely_If,$1,$2,751,1000)
166
167 $(call ListPathsSafely_If,$1,$2,1001,1250)
168 $(call ListPathsSafely_If,$1,$2,1251,1500)
169 $(call ListPathsSafely_If,$1,$2,1501,1750)
170 $(call ListPathsSafely_If,$1,$2,1751,2000)
171
172 $(call ListPathsSafely_If,$1,$2,2001,2250)
173 $(call ListPathsSafely_If,$1,$2,2251,2500)
174 $(call ListPathsSafely_If,$1,$2,2501,2750)
175 $(call ListPathsSafely_If,$1,$2,2751,3000)
176
177 $(call ListPathsSafely_If,$1,$2,3001,3250)
178 $(call ListPathsSafely_If,$1,$2,3251,3500)
179 $(call ListPathsSafely_If,$1,$2,3501,3750)
180 $(call ListPathsSafely_If,$1,$2,3751,4000)
181
182 $(call ListPathsSafely_If,$1,$2,4001,4250)
183 $(call ListPathsSafely_If,$1,$2,4251,4500)
184 $(call ListPathsSafely_If,$1,$2,4501,4750)
185 $(call ListPathsSafely_If,$1,$2,4751,5000)
186
187 $(call ListPathsSafely_If,$1,$2,5001,5250)
188 $(call ListPathsSafely_If,$1,$2,5251,5500)
189 $(call ListPathsSafely_If,$1,$2,5501,5750)
190 $(call ListPathsSafely_If,$1,$2,5751,6000)
191
192 $(call ListPathsSafely_If,$1,$2,6001,6250)
193 $(call ListPathsSafely_If,$1,$2,6251,6500)
194 $(call ListPathsSafely_If,$1,$2,6501,6750)
195 $(call ListPathsSafely_If,$1,$2,6751,7000)
196
197 $(call ListPathsSafely_If,$1,$2,7001,7250)
198 $(call ListPathsSafely_If,$1,$2,7251,7500)
199 $(call ListPathsSafely_If,$1,$2,7501,7750)
200 $(call ListPathsSafely_If,$1,$2,7751,8000)
201
202 $(call ListPathsSafely_If,$1,$2,8001,8250)
203 $(call ListPathsSafely_If,$1,$2,8251,8500)
204 $(call ListPathsSafely_If,$1,$2,8501,8750)
205 $(call ListPathsSafely_If,$1,$2,8751,9000)
206
207 $(call ListPathsSafely_If,$1,$2,9001,9250)
208 $(call ListPathsSafely_If,$1,$2,9251,9500)
209 $(call ListPathsSafely_If,$1,$2,9501,9750)
210 $(call ListPathsSafely_If,$1,$2,9751,10000)
211
212 $(call ListPathsSafely_Printf,$1,$2,$3,1)
213 $(call ListPathsSafely_Printf,$1,$2,$3,251)
214 $(call ListPathsSafely_Printf,$1,$2,$3,501)
215 $(call ListPathsSafely_Printf,$1,$2,$3,751)
216
217 $(call ListPathsSafely_Printf,$1,$2,$3,1001)
218 $(call ListPathsSafely_Printf,$1,$2,$3,1251)
219 $(call ListPathsSafely_Printf,$1,$2,$3,1501)
220 $(call ListPathsSafely_Printf,$1,$2,$3,1751)
221
222 $(call ListPathsSafely_Printf,$1,$2,$3,2001)
223 $(call ListPathsSafely_Printf,$1,$2,$3,2251)
224 $(call ListPathsSafely_Printf,$1,$2,$3,2501)
225 $(call ListPathsSafely_Printf,$1,$2,$3,2751)
226
227 $(call ListPathsSafely_Printf,$1,$2,$3,3001)
228 $(call ListPathsSafely_Printf,$1,$2,$3,3251)
229 $(call ListPathsSafely_Printf,$1,$2,$3,3501)
230 $(call ListPathsSafely_Printf,$1,$2,$3,3751)
231
232 $(call ListPathsSafely_Printf,$1,$2,$3,4001)
233 $(call ListPathsSafely_Printf,$1,$2,$3,4251)
234 $(call ListPathsSafely_Printf,$1,$2,$3,4501)
235 $(call ListPathsSafely_Printf,$1,$2,$3,4751)
236
237 $(call ListPathsSafely_Printf,$1,$2,$3,5001)
238 $(call ListPathsSafely_Printf,$1,$2,$3,5251)
239 $(call ListPathsSafely_Printf,$1,$2,$3,5501)
240 $(call ListPathsSafely_Printf,$1,$2,$3,5751)
241
242 $(call ListPathsSafely_Printf,$1,$2,$3,6001)
243 $(call ListPathsSafely_Printf,$1,$2,$3,6251)
244 $(call ListPathsSafely_Printf,$1,$2,$3,6501)
245 $(call ListPathsSafely_Printf,$1,$2,$3,6751)
246
247 $(call ListPathsSafely_Printf,$1,$2,$3,7001)
248 $(call ListPathsSafely_Printf,$1,$2,$3,7251)
249 $(call ListPathsSafely_Printf,$1,$2,$3,7501)
250 $(call ListPathsSafely_Printf,$1,$2,$3,7751)
251
252 $(call ListPathsSafely_Printf,$1,$2,$3,8001)
253 $(call ListPathsSafely_Printf,$1,$2,$3,8251)
254 $(call ListPathsSafely_Printf,$1,$2,$3,8501)
255 $(call ListPathsSafely_Printf,$1,$2,$3,8751)
256
257 $(call ListPathsSafely_Printf,$1,$2,$3,9001)
258 $(call ListPathsSafely_Printf,$1,$2,$3,9251)
259 $(call ListPathsSafely_Printf,$1,$2,$3,9501)
260 $(call ListPathsSafely_Printf,$1,$2,$3,9751)
261 endef
262
263 define ListPathsSafelyNow_IfPrintf
264 ifneq (,$$(word $4,$$($1)))
265 $$(eval $1_LPS$4:=$$(call compress_paths,$$(wordlist $4,$5,$$($1))))
266 $$(shell printf -- "$$(strip $$($1_LPS$4))\n" | $(decompress_paths) $3)
267 endif
268 endef
269
270 # And an non-receipt version:
271 define ListPathsSafelyNow
272 ifneq (,$$(word 10001,$$($1)))
273 $$(error Cannot list safely more than 10000 paths. $1 has $$(words $$($1)) paths!)
274 endif
275 $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,1,250)
276 $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,251,500)
277 $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,501,750)
278 $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,751,1000)
279
280 $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,1001,1250)
281 $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,1251,1500)
282 $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,1501,1750)
283 $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,1751,2000)
284
285 $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,2001,2250)
286 $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,2251,2500)
287 $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,2501,2750)
288 $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,2751,3000)
289
290 $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,3001,3250)
291 $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,3251,3500)
292 $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,3501,3750)
293 $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,3751,4000)
294
295 $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,4001,4250)
296 $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,4251,4500)
297 $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,4501,4750)
298 $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,4751,5000)
299
300 $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,5001,5250)
301 $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,5251,5500)
302 $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,5501,5750)
303 $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,5751,6000)
304
305 $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,6001,6250)
306 $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,6251,6500)
307 $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,6501,6750)
308 $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,6751,7000)
309
310 $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,7001,7250)
311 $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,7251,7500)
312 $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,7501,7750)
313 $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,7751,8000)
314
315 $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,8001,8250)
316 $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,8251,8500)
317 $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,8501,8750)
318 $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,8751,9000)
319
320 $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,9001,9250)
321 $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,9251,9500)
322 $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,9501,9750)
323 $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,9751,10000)
324
325 endef
326
327 endif # _MAKEBASE_GMK