A transport service is a concrete subclass of this class * that has a zero-argument constructor and implements the abstract * methods specified below. It is the underlying service * used by a {@link com.sun.jdi.connect.Transport} for * connections between a debugger and a target VM. * *
A transport service is used to establish a connection * between a debugger and a target VM, and to transport Java * Debug Wire Protocol (JDWP) packets over an underlying * communication protocol. In essence a transport service * implementation binds JDWP (as specified in the * * JDWP specification) to an underlying communication * protocol. A transport service implementation provides * a reliable JDWP packet transportation service. JDWP * packets are sent to and from the target VM without duplication * or data loss. A transport service implementation may be * based on an underlying communication protocol that is * reliable or unreliable. If the underlying communication * protocol is reliable then the transport service implementation * may be relatively simple and may only need to transport JDWP * packets as payloads of the underlying communication * protocol. In the case of an unreliable communication * protocol the transport service implementation may include * additional protocol support in order to ensure that packets * are not duplicated and that there is no data loss. The * details of such protocols are specific to the implementation * but may involve techniques such as the positive * acknowledgment with retransmission technique used in * protocols such as the Transmission Control Protocol (TCP) * (see RFC 793 * ). * *
A transport service can be used to initiate a connection * to a target VM. This is done by invoking the {@link #attach} * method. Alternatively, a transport service can listen and * accept connections initiated by a target VM. This is done * by invoking the {@link #startListening(String)} method to * put the transport into listen mode. Then the {@link #accept} * method is used to accept a connection initiated by a * target VM. * * @since 1.5 */ @jdk.Supported public abstract class TransportService { /** * Returns a name to identify the transport service. * * @return The name of the transport service */ public abstract String name(); /** * Returns a description of the transport service. * * @return The description of the transport service */ public abstract String description(); /** * The transport service capabilities. */ @jdk.Supported public static abstract class Capabilities { /** * Tells whether or not this transport service can support * multiple concurrent connections to a single address that * it is listening on. * * @return true if, and only if, this transport * service supports multiple connections. */ public abstract boolean supportsMultipleConnections(); /** * Tell whether or not this transport service supports a timeout * when attaching to a target VM. * * @return true if, and only if, this transport * service supports attaching with a timeout. * * @see #attach(String,long,long) */ public abstract boolean supportsAttachTimeout(); /** * Tell whether or not this transport service supports a * timeout while waiting for a target VM to connect. * * @return true if, and only if, this transport * service supports timeout while waiting for * a target VM to connect. * * @see #accept(TransportService.ListenKey,long,long) */ public abstract boolean supportsAcceptTimeout(); /** * Tells whether or not this transport service supports a * timeout when handshaking with the target VM. * * @return true if, and only if, this transport * service supports a timeout while handshaking * with the target VM. * * @see #attach(String,long,long) * @see #accept(TransportService.ListenKey,long,long) */ public abstract boolean supportsHandshakeTimeout(); } /** * Returns the capabilities of the transport service. * * @return the transport service capabilities */ public abstract Capabilities capabilities(); /** * Attaches to the specified address. * *
Attaches to the specified address and returns a connection * representing the bi-directional communication channel to the * target VM. * *
Attaching to the target VM involves two steps: * First, a connection is established to specified address. This * is followed by a handshake to ensure that the connection is * to a target VM. The handshake involves the exchange * of a string JDWP-Handshake as specified in the * Java Debug Wire Protocol specification. * * @param address * The address of the target VM. * * @param attachTimeout * If this transport service supports an attach timeout, * and if attachTimeout is positive, then it specifies * the timeout, in milliseconds (more or less), to use * when attaching to the target VM. If the transport service * does not support an attach timeout, or if attachTimeout * is specified as zero then attach without any timeout. * * @param handshakeTimeout * If this transport service supports a handshake timeout, * and if handshakeTimeout is positive, then it * specifies the timeout, in milliseconds (more or less), to * use when handshaking with the target VM. The exact * usage of the timeout are specific to the transport service. * A transport service may, for example, use the handshake * timeout as the inter-character timeout while waiting for * the JDWP-Handshake message from the target VM. * Alternatively, a transport service may, for example, * use the handshakeTimeout as a timeout for the duration of the * handshake exchange. * If the transport service does not support a handshake * timeout, or if handshakeTimeout is specified * as zero then the handshake does not timeout if there * isn't a response from the target VM. * * @return The Connection representing the bi-directional * communication channel to the target VM. * * @throws TransportTimeoutException * If a timeout occurs while establishing the connection. * * @throws IOException * If an I/O error occurs (including a timeout when * handshaking). * * @throws IllegalArgumentException * If the address is invalid or the value of the * attach timeout or handshake timeout is negative. * * @see TransportService.Capabilities#supportsAttachTimeout() */ public abstract Connection attach(String address, long attachTimeout, long handshakeTimeout) throws IOException; /** * A listen key. * *
A TransportService may listen on multiple, yet * different, addresses at the same time. To uniquely identify * each listener a listen key is created each time that * {@link #startListening startListening} is called. The listen * key is used in calls to the {@link #accept accept} method * to accept inbound connections to that listener. A listen * key is valid until it is used as an argument to {@link * #stopListening stopListening} to stop the transport * service from listening on an address. */ @jdk.Supported public static abstract class ListenKey { /** * Returns a string representation of the listen key. */ public abstract String address(); } /** * Listens on the specified address for inbound connections. * *
This method starts the transport service listening on * the specified address so that it can subsequently accept * an inbound connection. It does not wait until an inbound * connection is established. * * @param address * The address to start listening for connections, * or null to listen on an address choosen * by the transport service. * * @return a listen key to be used in subsequent calls to be * {@link #accept accept} or {@link #stopListening * stopListening} methods. * * @throws IOException * If an I/O error occurs. * * @throws IllegalArgumentException * If the specific address is invalid */ public abstract ListenKey startListening(String address) throws IOException; /** * Listens on an address choosen by the transport service. * *
This convenience method works as if by invoking {@link * #startListening(String) startListening(null)}.
* * @return a listen key to be used in subsequent calls to be * {@link #accept accept} or {@link #stopListening * stopListening} methods. * * @throws IOException * If an I/O error occurs. */ public abstract ListenKey startListening() throws IOException; /** * Stop listening for inbound connections. * *Invoking this method while another thread is blocked * in {@link #accept accept}, with the same listen key, * waiting to accept a connection will cause that thread to * throw an IOException. If the thread blocked in accept * has already accepted a connection from a target VM and * is in the process of handshaking with the target VM then * invoking this method will not cause the thread to throw * an exception. * * @param listenKey * The listen key obtained from a previous call to {@link * #startListening(String)} or {@link #startListening()}. * * @throws IllegalArgumentException * If the listen key is invalid * * @throws IOException * If an I/O error occurs. */ public abstract void stopListening(ListenKey listenKey) throws IOException; /** * Accept a connection from a target VM. * *
Waits (indefinitely or with timeout) to accept a connection * from a target VM. Returns a connection representing the * bi-directional communication channel to the target VM. * *
Accepting a connection from a target VM involves two * steps. First, the transport service waits to accept * the connection from the target VM. Once the connection is * established a handshake is performed to ensure that the * connection is indeed to a target VM. The handshake involves * the exchange of a string JDWP-Handshake as specified * in the * Java Debug Wire Protocol specification. * * @param listenKey * A listen key obtained from a previous call to {@link * #startListening(String)} or {@link #startListening()}. * * @param acceptTimeout * if this transport service supports an accept timeout, and * if acceptTimeout is positive then block for up to * acceptTimeout milliseconds, more or less, while waiting * for the target VM to connect. * If the transport service does not support an accept timeout * or if acceptTimeout is zero then block indefinitely * for a target VM to connect. * * @param handshakeTimeout * If this transport service supports a handshake timeout, * and if handshakeTimeout is positive, then it * specifies the timeout, in milliseconds (more or less), to * use when handshaking with the target VM. The exact * usage of the timeout is specific to the transport service. * A transport service may, for example, use the handshake * timeout as the inter-character timeout while waiting for * the JDWP-Handshake message from the target VM. * Alternatively, a transport service may, for example, * use the timeout as a timeout for the duration of the * handshake exchange. * If the transport service does not support a handshake * timeout, of if handshakeTimeout is specified * as zero then the handshake does not timeout if there * isn't a response from the target VM. * * @return The Connection representing the bi-directional * communication channel to the target VM. * * @throws TransportTimeoutException * If a timeout occurs while waiting for a target VM * to connect. * * @throws IOException * If an I/O error occurs (including a timeout when * handshaking). * * @throws IllegalArgumentException * If the value of the acceptTimeout argument, or * handshakeTimeout is negative, or an invalid listen key * is provided. * * @throws IllegalStateException * If {@link #stopListening stopListening} has already been * called with this listen key and the transport service * is no longer listening for inbound connections. * * @see TransportService.Capabilities#supportsAcceptTimeout() */ public abstract Connection accept(ListenKey listenKey, long acceptTimeout, long handshakeTimeout) throws IOException; }