hotspot/src/cpu/x86/vm/c1_MacroAssembler_x86.cpp
Print this page
rev 611 : Merge
*** 1,10 ****
- #ifdef USE_PRAGMA_IDENT_SRC
- #pragma ident "@(#)c1_MacroAssembler_x86.cpp 1.60 07/09/17 09:25:58 JVM"
- #endif
/*
! * Copyright 1999-2007 Sun Microsystems, Inc. All Rights Reserved.
* DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
*
* This code is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 only, as
* published by the Free Software Foundation.
--- 1,7 ----
/*
! * Copyright 1999-2008 Sun Microsystems, Inc. All Rights Reserved.
* DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
*
* This code is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 only, as
* published by the Free Software Foundation.
*** 27,67 ****
#include "incls/_precompiled.incl"
#include "incls/_c1_MacroAssembler_x86.cpp.incl"
int C1_MacroAssembler::lock_object(Register hdr, Register obj, Register disp_hdr, Register scratch, Label& slow_case) {
! const int aligned_mask = 3;
const int hdr_offset = oopDesc::mark_offset_in_bytes();
assert(hdr == rax, "hdr must be rax, for the cmpxchg instruction");
assert(hdr != obj && hdr != disp_hdr && obj != disp_hdr, "registers must be different");
- assert(BytesPerWord == 4, "adjust aligned_mask and code");
Label done;
int null_check_offset = -1;
verify_oop(obj);
// save object being locked into the BasicObjectLock
! movl(Address(disp_hdr, BasicObjectLock::obj_offset_in_bytes()), obj);
if (UseBiasedLocking) {
assert(scratch != noreg, "should have scratch register at this point");
null_check_offset = biased_locking_enter(disp_hdr, obj, hdr, scratch, false, done, &slow_case);
} else {
null_check_offset = offset();
}
// Load object header
! movl(hdr, Address(obj, hdr_offset));
// and mark it as unlocked
! orl(hdr, markOopDesc::unlocked_value);
// save unlocked object header into the displaced header location on the stack
! movl(Address(disp_hdr, 0), hdr);
// test if object header is still the same (i.e. unlocked), and if so, store the
// displaced header address in the object header - if it is not the same, get the
// object header instead
if (os::is_MP()) MacroAssembler::lock(); // must be immediately before cmpxchg!
! cmpxchg(disp_hdr, Address(obj, hdr_offset));
// if the object header was the same, we're done
if (PrintBiasedLockingStatistics) {
cond_inc32(Assembler::equal,
ExternalAddress((address)BiasedLocking::fast_path_entry_count_addr()));
}
--- 24,63 ----
#include "incls/_precompiled.incl"
#include "incls/_c1_MacroAssembler_x86.cpp.incl"
int C1_MacroAssembler::lock_object(Register hdr, Register obj, Register disp_hdr, Register scratch, Label& slow_case) {
! const int aligned_mask = BytesPerWord -1;
const int hdr_offset = oopDesc::mark_offset_in_bytes();
assert(hdr == rax, "hdr must be rax, for the cmpxchg instruction");
assert(hdr != obj && hdr != disp_hdr && obj != disp_hdr, "registers must be different");
Label done;
int null_check_offset = -1;
verify_oop(obj);
// save object being locked into the BasicObjectLock
! movptr(Address(disp_hdr, BasicObjectLock::obj_offset_in_bytes()), obj);
if (UseBiasedLocking) {
assert(scratch != noreg, "should have scratch register at this point");
null_check_offset = biased_locking_enter(disp_hdr, obj, hdr, scratch, false, done, &slow_case);
} else {
null_check_offset = offset();
}
// Load object header
! movptr(hdr, Address(obj, hdr_offset));
// and mark it as unlocked
! orptr(hdr, markOopDesc::unlocked_value);
// save unlocked object header into the displaced header location on the stack
! movptr(Address(disp_hdr, 0), hdr);
// test if object header is still the same (i.e. unlocked), and if so, store the
// displaced header address in the object header - if it is not the same, get the
// object header instead
if (os::is_MP()) MacroAssembler::lock(); // must be immediately before cmpxchg!
! cmpxchgptr(disp_hdr, Address(obj, hdr_offset));
// if the object header was the same, we're done
if (PrintBiasedLockingStatistics) {
cond_inc32(Assembler::equal,
ExternalAddress((address)BiasedLocking::fast_path_entry_count_addr()));
}
*** 77,129 ****
//
// (hdr - rsp) & (aligned_mask - page_size)
//
// assuming both the stack pointer and page_size have their least
// significant 2 bits cleared and page_size is a power of 2
! subl(hdr, rsp);
! andl(hdr, aligned_mask - os::vm_page_size());
// for recursive locking, the result is zero => save it in the displaced header
// location (NULL in the displaced hdr location indicates recursive locking)
! movl(Address(disp_hdr, 0), hdr);
// otherwise we don't care about the result and handle locking via runtime call
jcc(Assembler::notZero, slow_case);
// done
bind(done);
return null_check_offset;
}
void C1_MacroAssembler::unlock_object(Register hdr, Register obj, Register disp_hdr, Label& slow_case) {
! const int aligned_mask = 3;
const int hdr_offset = oopDesc::mark_offset_in_bytes();
assert(disp_hdr == rax, "disp_hdr must be rax, for the cmpxchg instruction");
assert(hdr != obj && hdr != disp_hdr && obj != disp_hdr, "registers must be different");
- assert(BytesPerWord == 4, "adjust aligned_mask and code");
Label done;
if (UseBiasedLocking) {
// load object
! movl(obj, Address(disp_hdr, BasicObjectLock::obj_offset_in_bytes()));
biased_locking_exit(obj, hdr, done);
}
// load displaced header
! movl(hdr, Address(disp_hdr, 0));
// if the loaded hdr is NULL we had recursive locking
! testl(hdr, hdr);
// if we had recursive locking, we are done
jcc(Assembler::zero, done);
if (!UseBiasedLocking) {
// load object
! movl(obj, Address(disp_hdr, BasicObjectLock::obj_offset_in_bytes()));
}
verify_oop(obj);
// test if object header is pointing to the displaced header, and if so, restore
// the displaced header in the object - if the object header is not pointing to
// the displaced header, get the object header instead
if (os::is_MP()) MacroAssembler::lock(); // must be immediately before cmpxchg!
! cmpxchg(hdr, Address(obj, hdr_offset));
// if the object header was not pointing to the displaced header,
// we do unlocking via runtime call
jcc(Assembler::notEqual, slow_case);
// done
bind(done);
--- 73,124 ----
//
// (hdr - rsp) & (aligned_mask - page_size)
//
// assuming both the stack pointer and page_size have their least
// significant 2 bits cleared and page_size is a power of 2
! subptr(hdr, rsp);
! andptr(hdr, aligned_mask - os::vm_page_size());
// for recursive locking, the result is zero => save it in the displaced header
// location (NULL in the displaced hdr location indicates recursive locking)
! movptr(Address(disp_hdr, 0), hdr);
// otherwise we don't care about the result and handle locking via runtime call
jcc(Assembler::notZero, slow_case);
// done
bind(done);
return null_check_offset;
}
void C1_MacroAssembler::unlock_object(Register hdr, Register obj, Register disp_hdr, Label& slow_case) {
! const int aligned_mask = BytesPerWord -1;
const int hdr_offset = oopDesc::mark_offset_in_bytes();
assert(disp_hdr == rax, "disp_hdr must be rax, for the cmpxchg instruction");
assert(hdr != obj && hdr != disp_hdr && obj != disp_hdr, "registers must be different");
Label done;
if (UseBiasedLocking) {
// load object
! movptr(obj, Address(disp_hdr, BasicObjectLock::obj_offset_in_bytes()));
biased_locking_exit(obj, hdr, done);
}
// load displaced header
! movptr(hdr, Address(disp_hdr, 0));
// if the loaded hdr is NULL we had recursive locking
! testptr(hdr, hdr);
// if we had recursive locking, we are done
jcc(Assembler::zero, done);
if (!UseBiasedLocking) {
// load object
! movptr(obj, Address(disp_hdr, BasicObjectLock::obj_offset_in_bytes()));
}
verify_oop(obj);
// test if object header is pointing to the displaced header, and if so, restore
// the displaced header in the object - if the object header is not pointing to
// the displaced header, get the object header instead
if (os::is_MP()) MacroAssembler::lock(); // must be immediately before cmpxchg!
! cmpxchgptr(hdr, Address(obj, hdr_offset));
// if the object header was not pointing to the displaced header,
// we do unlocking via runtime call
jcc(Assembler::notEqual, slow_case);
// done
bind(done);
*** 142,158 ****
void C1_MacroAssembler::initialize_header(Register obj, Register klass, Register len, Register t1, Register t2) {
assert_different_registers(obj, klass, len);
if (UseBiasedLocking && !len->is_valid()) {
assert_different_registers(obj, klass, len, t1, t2);
! movl(t1, Address(klass, Klass::prototype_header_offset_in_bytes() + klassOopDesc::klass_part_offset_in_bytes()));
! movl(Address(obj, oopDesc::mark_offset_in_bytes()), t1);
} else {
! movl(Address(obj, oopDesc::mark_offset_in_bytes ()), (int)markOopDesc::prototype());
}
! movl(Address(obj, oopDesc::klass_offset_in_bytes()), klass);
if (len->is_valid()) {
movl(Address(obj, arrayOopDesc::length_offset_in_bytes()), len);
}
}
--- 137,154 ----
void C1_MacroAssembler::initialize_header(Register obj, Register klass, Register len, Register t1, Register t2) {
assert_different_registers(obj, klass, len);
if (UseBiasedLocking && !len->is_valid()) {
assert_different_registers(obj, klass, len, t1, t2);
! movptr(t1, Address(klass, Klass::prototype_header_offset_in_bytes() + klassOopDesc::klass_part_offset_in_bytes()));
! movptr(Address(obj, oopDesc::mark_offset_in_bytes()), t1);
} else {
! // This assumes that all prototype bits fit in an int32_t
! movptr(Address(obj, oopDesc::mark_offset_in_bytes ()), (int32_t)(intptr_t)markOopDesc::prototype());
}
! movptr(Address(obj, oopDesc::klass_offset_in_bytes()), klass);
if (len->is_valid()) {
movl(Address(obj, arrayOopDesc::length_offset_in_bytes()), len);
}
}
*** 161,206 ****
void C1_MacroAssembler::initialize_body(Register obj, Register len_in_bytes, int hdr_size_in_bytes, Register t1) {
Label done;
assert(obj != len_in_bytes && obj != t1 && t1 != len_in_bytes, "registers must be different");
assert((hdr_size_in_bytes & (BytesPerWord - 1)) == 0, "header size is not a multiple of BytesPerWord");
Register index = len_in_bytes;
! subl(index, hdr_size_in_bytes);
jcc(Assembler::zero, done);
// initialize topmost word, divide index by 2, check if odd and test if zero
// note: for the remaining code to work, index must be a multiple of BytesPerWord
#ifdef ASSERT
{ Label L;
! testl(index, BytesPerWord - 1);
jcc(Assembler::zero, L);
stop("index is not a multiple of BytesPerWord");
bind(L);
}
#endif
! xorl(t1, t1); // use _zero reg to clear memory (shorter code)
if (UseIncDec) {
! shrl(index, 3); // divide by 8 and set carry flag if bit 2 was set
} else {
! shrl(index, 2); // use 2 instructions to avoid partial flag stall
! shrl(index, 1);
}
// index could have been not a multiple of 8 (i.e., bit 2 was set)
{ Label even;
// note: if index was a multiple of 8, than it cannot
// be 0 now otherwise it must have been 0 before
// => if it is even, we don't need to check for 0 again
jcc(Assembler::carryClear, even);
// clear topmost word (no jump needed if conditional assignment would work here)
! movl(Address(obj, index, Address::times_8, hdr_size_in_bytes - 0*BytesPerWord), t1);
// index could be 0 now, need to check again
jcc(Assembler::zero, done);
bind(even);
}
// initialize remaining object fields: rdx is a multiple of 2 now
{ Label loop;
bind(loop);
! movl(Address(obj, index, Address::times_8, hdr_size_in_bytes - 1*BytesPerWord), t1);
! movl(Address(obj, index, Address::times_8, hdr_size_in_bytes - 2*BytesPerWord), t1);
decrement(index);
jcc(Assembler::notZero, loop);
}
// done
--- 157,205 ----
void C1_MacroAssembler::initialize_body(Register obj, Register len_in_bytes, int hdr_size_in_bytes, Register t1) {
Label done;
assert(obj != len_in_bytes && obj != t1 && t1 != len_in_bytes, "registers must be different");
assert((hdr_size_in_bytes & (BytesPerWord - 1)) == 0, "header size is not a multiple of BytesPerWord");
Register index = len_in_bytes;
! // index is positive and ptr sized
! subptr(index, hdr_size_in_bytes);
jcc(Assembler::zero, done);
// initialize topmost word, divide index by 2, check if odd and test if zero
// note: for the remaining code to work, index must be a multiple of BytesPerWord
#ifdef ASSERT
{ Label L;
! testptr(index, BytesPerWord - 1);
jcc(Assembler::zero, L);
stop("index is not a multiple of BytesPerWord");
bind(L);
}
#endif
! xorptr(t1, t1); // use _zero reg to clear memory (shorter code)
if (UseIncDec) {
! shrptr(index, 3); // divide by 8/16 and set carry flag if bit 2 was set
} else {
! shrptr(index, 2); // use 2 instructions to avoid partial flag stall
! shrptr(index, 1);
}
+ #ifndef _LP64
// index could have been not a multiple of 8 (i.e., bit 2 was set)
{ Label even;
// note: if index was a multiple of 8, than it cannot
// be 0 now otherwise it must have been 0 before
// => if it is even, we don't need to check for 0 again
jcc(Assembler::carryClear, even);
// clear topmost word (no jump needed if conditional assignment would work here)
! movptr(Address(obj, index, Address::times_8, hdr_size_in_bytes - 0*BytesPerWord), t1);
// index could be 0 now, need to check again
jcc(Assembler::zero, done);
bind(even);
}
+ #endif // !_LP64
// initialize remaining object fields: rdx is a multiple of 2 now
{ Label loop;
bind(loop);
! movptr(Address(obj, index, Address::times_8, hdr_size_in_bytes - 1*BytesPerWord), t1);
! NOT_LP64(movptr(Address(obj, index, Address::times_8, hdr_size_in_bytes - 2*BytesPerWord), t1);)
decrement(index);
jcc(Assembler::notZero, loop);
}
// done
*** 219,261 ****
}
void C1_MacroAssembler::initialize_object(Register obj, Register klass, Register var_size_in_bytes, int con_size_in_bytes, Register t1, Register t2) {
assert((con_size_in_bytes & MinObjAlignmentInBytesMask) == 0,
"con_size_in_bytes is not multiple of alignment");
! const int hdr_size_in_bytes = oopDesc::header_size_in_bytes();
initialize_header(obj, klass, noreg, t1, t2);
// clear rest of allocated space
const Register t1_zero = t1;
const Register index = t2;
const int threshold = 6 * BytesPerWord; // approximate break even point for code size (see comments below)
if (var_size_in_bytes != noreg) {
! movl(index, var_size_in_bytes);
initialize_body(obj, index, hdr_size_in_bytes, t1_zero);
} else if (con_size_in_bytes <= threshold) {
// use explicit null stores
// code size = 2 + 3*n bytes (n = number of fields to clear)
! xorl(t1_zero, t1_zero); // use t1_zero reg to clear memory (shorter code)
for (int i = hdr_size_in_bytes; i < con_size_in_bytes; i += BytesPerWord)
! movl(Address(obj, i), t1_zero);
} else if (con_size_in_bytes > hdr_size_in_bytes) {
// use loop to null out the fields
// code size = 16 bytes for even n (n = number of fields to clear)
// initialize last object field first if odd number of fields
! xorl(t1_zero, t1_zero); // use t1_zero reg to clear memory (shorter code)
! movl(index, (con_size_in_bytes - hdr_size_in_bytes) >> 3);
// initialize last object field if constant size is odd
if (((con_size_in_bytes - hdr_size_in_bytes) & 4) != 0)
! movl(Address(obj, con_size_in_bytes - (1*BytesPerWord)), t1_zero);
// initialize remaining object fields: rdx is a multiple of 2
{ Label loop;
bind(loop);
! movl(Address(obj, index, Address::times_8,
! hdr_size_in_bytes - (1*BytesPerWord)), t1_zero);
! movl(Address(obj, index, Address::times_8,
! hdr_size_in_bytes - (2*BytesPerWord)), t1_zero);
decrement(index);
jcc(Assembler::notZero, loop);
}
}
--- 218,260 ----
}
void C1_MacroAssembler::initialize_object(Register obj, Register klass, Register var_size_in_bytes, int con_size_in_bytes, Register t1, Register t2) {
assert((con_size_in_bytes & MinObjAlignmentInBytesMask) == 0,
"con_size_in_bytes is not multiple of alignment");
! const int hdr_size_in_bytes = instanceOopDesc::base_offset_in_bytes();
initialize_header(obj, klass, noreg, t1, t2);
// clear rest of allocated space
const Register t1_zero = t1;
const Register index = t2;
const int threshold = 6 * BytesPerWord; // approximate break even point for code size (see comments below)
if (var_size_in_bytes != noreg) {
! mov(index, var_size_in_bytes);
initialize_body(obj, index, hdr_size_in_bytes, t1_zero);
} else if (con_size_in_bytes <= threshold) {
// use explicit null stores
// code size = 2 + 3*n bytes (n = number of fields to clear)
! xorptr(t1_zero, t1_zero); // use t1_zero reg to clear memory (shorter code)
for (int i = hdr_size_in_bytes; i < con_size_in_bytes; i += BytesPerWord)
! movptr(Address(obj, i), t1_zero);
} else if (con_size_in_bytes > hdr_size_in_bytes) {
// use loop to null out the fields
// code size = 16 bytes for even n (n = number of fields to clear)
// initialize last object field first if odd number of fields
! xorptr(t1_zero, t1_zero); // use t1_zero reg to clear memory (shorter code)
! movptr(index, (con_size_in_bytes - hdr_size_in_bytes) >> 3);
// initialize last object field if constant size is odd
if (((con_size_in_bytes - hdr_size_in_bytes) & 4) != 0)
! movptr(Address(obj, con_size_in_bytes - (1*BytesPerWord)), t1_zero);
// initialize remaining object fields: rdx is a multiple of 2
{ Label loop;
bind(loop);
! movptr(Address(obj, index, Address::times_8, hdr_size_in_bytes - (1*BytesPerWord)),
! t1_zero);
! NOT_LP64(movptr(Address(obj, index, Address::times_8, hdr_size_in_bytes - (2*BytesPerWord)),
! t1_zero);)
decrement(index);
jcc(Assembler::notZero, loop);
}
}
*** 270,290 ****
void C1_MacroAssembler::allocate_array(Register obj, Register len, Register t1, Register t2, int header_size, Address::ScaleFactor f, Register klass, Label& slow_case) {
assert(obj == rax, "obj must be in rax, for cmpxchg");
assert_different_registers(obj, len, t1, t2, klass);
// determine alignment mask
! assert(BytesPerWord == 4, "must be a multiple of 2 for masking code to work");
// check for negative or excessive length
! cmpl(len, max_array_allocation_length);
jcc(Assembler::above, slow_case);
const Register arr_size = t2; // okay to be the same
// align object end
! movl(arr_size, header_size * BytesPerWord + MinObjAlignmentInBytesMask);
! leal(arr_size, Address(arr_size, len, f));
! andl(arr_size, ~MinObjAlignmentInBytesMask);
try_allocate(obj, arr_size, 0, t1, t2, slow_case);
initialize_header(obj, klass, len, t1, t2);
--- 269,289 ----
void C1_MacroAssembler::allocate_array(Register obj, Register len, Register t1, Register t2, int header_size, Address::ScaleFactor f, Register klass, Label& slow_case) {
assert(obj == rax, "obj must be in rax, for cmpxchg");
assert_different_registers(obj, len, t1, t2, klass);
// determine alignment mask
! assert(!(BytesPerWord & 1), "must be a multiple of 2 for masking code to work");
// check for negative or excessive length
! cmpptr(len, (int32_t)max_array_allocation_length);
jcc(Assembler::above, slow_case);
const Register arr_size = t2; // okay to be the same
// align object end
! movptr(arr_size, (int32_t)header_size * BytesPerWord + MinObjAlignmentInBytesMask);
! lea(arr_size, Address(arr_size, len, f));
! andptr(arr_size, ~MinObjAlignmentInBytesMask);
try_allocate(obj, arr_size, 0, t1, t2, slow_case);
initialize_header(obj, klass, len, t1, t2);
*** 306,321 ****
verify_oop(receiver);
// explicit NULL check not needed since load from [klass_offset] causes a trap
// check against inline cache
assert(!MacroAssembler::needs_explicit_null_check(oopDesc::klass_offset_in_bytes()), "must add explicit null check");
int start_offset = offset();
! cmpl(iCache, Address(receiver, oopDesc::klass_offset_in_bytes()));
// if icache check fails, then jump to runtime routine
// Note: RECEIVER must still contain the receiver!
jump_cc(Assembler::notEqual,
RuntimeAddress(SharedRuntime::get_ic_miss_stub()));
! assert(offset() - start_offset == 9, "check alignment in emit_method_entry");
}
void C1_MacroAssembler::method_exit(bool restore_frame) {
if (restore_frame) {
--- 305,321 ----
verify_oop(receiver);
// explicit NULL check not needed since load from [klass_offset] causes a trap
// check against inline cache
assert(!MacroAssembler::needs_explicit_null_check(oopDesc::klass_offset_in_bytes()), "must add explicit null check");
int start_offset = offset();
! cmpptr(iCache, Address(receiver, oopDesc::klass_offset_in_bytes()));
// if icache check fails, then jump to runtime routine
// Note: RECEIVER must still contain the receiver!
jump_cc(Assembler::notEqual,
RuntimeAddress(SharedRuntime::get_ic_miss_stub()));
! const int ic_cmp_size = LP64_ONLY(10) NOT_LP64(9);
! assert(offset() - start_offset == ic_cmp_size, "check alignment in emit_method_entry");
}
void C1_MacroAssembler::method_exit(bool restore_frame) {
if (restore_frame) {
*** 365,388 ****
}
void C1_MacroAssembler::verify_not_null_oop(Register r) {
if (!VerifyOops) return;
Label not_null;
! testl(r, r);
jcc(Assembler::notZero, not_null);
stop("non-null oop required");
bind(not_null);
verify_oop(r);
}
void C1_MacroAssembler::invalidate_registers(bool inv_rax, bool inv_rbx, bool inv_rcx, bool inv_rdx, bool inv_rsi, bool inv_rdi) {
#ifdef ASSERT
! if (inv_rax) movl(rax, 0xDEAD);
! if (inv_rbx) movl(rbx, 0xDEAD);
! if (inv_rcx) movl(rcx, 0xDEAD);
! if (inv_rdx) movl(rdx, 0xDEAD);
! if (inv_rsi) movl(rsi, 0xDEAD);
! if (inv_rdi) movl(rdi, 0xDEAD);
#endif
}
#endif // ifndef PRODUCT
--- 365,388 ----
}
void C1_MacroAssembler::verify_not_null_oop(Register r) {
if (!VerifyOops) return;
Label not_null;
! testptr(r, r);
jcc(Assembler::notZero, not_null);
stop("non-null oop required");
bind(not_null);
verify_oop(r);
}
void C1_MacroAssembler::invalidate_registers(bool inv_rax, bool inv_rbx, bool inv_rcx, bool inv_rdx, bool inv_rsi, bool inv_rdi) {
#ifdef ASSERT
! if (inv_rax) movptr(rax, 0xDEAD);
! if (inv_rbx) movptr(rbx, 0xDEAD);
! if (inv_rcx) movptr(rcx, 0xDEAD);
! if (inv_rdx) movptr(rdx, 0xDEAD);
! if (inv_rsi) movptr(rsi, 0xDEAD);
! if (inv_rdi) movptr(rdi, 0xDEAD);
#endif
}
#endif // ifndef PRODUCT