--- old/modules/javafx.graphics/src/main/native-iio/libjpeg7/jcparam.c 2018-10-01 15:50:44.785500688 +0530 +++ /dev/null 2018-10-01 11:30:56.436681000 +0530 @@ -1,632 +0,0 @@ -/* - * jcparam.c - * - * Copyright (C) 1991-1998, Thomas G. Lane. - * Modified 2003-2008 by Guido Vollbeding. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains optional default-setting code for the JPEG compressor. - * Applications do not have to use this file, but those that don't use it - * must know a lot more about the innards of the JPEG code. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* - * Quantization table setup routines - */ - -GLOBAL(void) -jpeg_add_quant_table (j_compress_ptr cinfo, int which_tbl, - const unsigned int *basic_table, - int scale_factor, boolean force_baseline) -/* Define a quantization table equal to the basic_table times - * a scale factor (given as a percentage). - * If force_baseline is TRUE, the computed quantization table entries - * are limited to 1..255 for JPEG baseline compatibility. - */ -{ - JQUANT_TBL ** qtblptr; - int i; - long temp; - - /* Safety check to ensure start_compress not called yet. */ - if (cinfo->global_state != CSTATE_START) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - - if (which_tbl < 0 || which_tbl >= NUM_QUANT_TBLS) - ERREXIT1(cinfo, JERR_DQT_INDEX, which_tbl); - - qtblptr = & cinfo->quant_tbl_ptrs[which_tbl]; - - if (*qtblptr == NULL) - *qtblptr = jpeg_alloc_quant_table((j_common_ptr) cinfo); - - for (i = 0; i < DCTSIZE2; i++) { - temp = ((long) basic_table[i] * scale_factor + 50L) / 100L; - /* limit the values to the valid range */ - if (temp <= 0L) temp = 1L; - if (temp > 32767L) temp = 32767L; /* max quantizer needed for 12 bits */ - if (force_baseline && temp > 255L) - temp = 255L; /* limit to baseline range if requested */ - (*qtblptr)->quantval[i] = (UINT16) temp; - } - - /* Initialize sent_table FALSE so table will be written to JPEG file. */ - (*qtblptr)->sent_table = FALSE; -} - - -/* These are the sample quantization tables given in JPEG spec section K.1. - * The spec says that the values given produce "good" quality, and - * when divided by 2, "very good" quality. - */ -static const unsigned int std_luminance_quant_tbl[DCTSIZE2] = { - 16, 11, 10, 16, 24, 40, 51, 61, - 12, 12, 14, 19, 26, 58, 60, 55, - 14, 13, 16, 24, 40, 57, 69, 56, - 14, 17, 22, 29, 51, 87, 80, 62, - 18, 22, 37, 56, 68, 109, 103, 77, - 24, 35, 55, 64, 81, 104, 113, 92, - 49, 64, 78, 87, 103, 121, 120, 101, - 72, 92, 95, 98, 112, 100, 103, 99 -}; -static const unsigned int std_chrominance_quant_tbl[DCTSIZE2] = { - 17, 18, 24, 47, 99, 99, 99, 99, - 18, 21, 26, 66, 99, 99, 99, 99, - 24, 26, 56, 99, 99, 99, 99, 99, - 47, 66, 99, 99, 99, 99, 99, 99, - 99, 99, 99, 99, 99, 99, 99, 99, - 99, 99, 99, 99, 99, 99, 99, 99, - 99, 99, 99, 99, 99, 99, 99, 99, - 99, 99, 99, 99, 99, 99, 99, 99 -}; - - -GLOBAL(void) -jpeg_default_qtables (j_compress_ptr cinfo, boolean force_baseline) -/* Set or change the 'quality' (quantization) setting, using default tables - * and straight percentage-scaling quality scales. - * This entry point allows different scalings for luminance and chrominance. - */ -{ - /* Set up two quantization tables using the specified scaling */ - jpeg_add_quant_table(cinfo, 0, std_luminance_quant_tbl, - cinfo->q_scale_factor[0], force_baseline); - jpeg_add_quant_table(cinfo, 1, std_chrominance_quant_tbl, - cinfo->q_scale_factor[1], force_baseline); -} - - -GLOBAL(void) -jpeg_set_linear_quality (j_compress_ptr cinfo, int scale_factor, - boolean force_baseline) -/* Set or change the 'quality' (quantization) setting, using default tables - * and a straight percentage-scaling quality scale. In most cases it's better - * to use jpeg_set_quality (below); this entry point is provided for - * applications that insist on a linear percentage scaling. - */ -{ - /* Set up two quantization tables using the specified scaling */ - jpeg_add_quant_table(cinfo, 0, std_luminance_quant_tbl, - scale_factor, force_baseline); - jpeg_add_quant_table(cinfo, 1, std_chrominance_quant_tbl, - scale_factor, force_baseline); -} - - -GLOBAL(int) -jpeg_quality_scaling (int quality) -/* Convert a user-specified quality rating to a percentage scaling factor - * for an underlying quantization table, using our recommended scaling curve. - * The input 'quality' factor should be 0 (terrible) to 100 (very good). - */ -{ - /* Safety limit on quality factor. Convert 0 to 1 to avoid zero divide. */ - if (quality <= 0) quality = 1; - if (quality > 100) quality = 100; - - /* The basic table is used as-is (scaling 100) for a quality of 50. - * Qualities 50..100 are converted to scaling percentage 200 - 2*Q; - * note that at Q=100 the scaling is 0, which will cause jpeg_add_quant_table - * to make all the table entries 1 (hence, minimum quantization loss). - * Qualities 1..50 are converted to scaling percentage 5000/Q. - */ - if (quality < 50) - quality = 5000 / quality; - else - quality = 200 - quality*2; - - return quality; -} - - -GLOBAL(void) -jpeg_set_quality (j_compress_ptr cinfo, int quality, boolean force_baseline) -/* Set or change the 'quality' (quantization) setting, using default tables. - * This is the standard quality-adjusting entry point for typical user - * interfaces; only those who want detailed control over quantization tables - * would use the preceding three routines directly. - */ -{ - /* Convert user 0-100 rating to percentage scaling */ - quality = jpeg_quality_scaling(quality); - - /* Set up standard quality tables */ - jpeg_set_linear_quality(cinfo, quality, force_baseline); -} - - -/* - * Huffman table setup routines - */ - -LOCAL(void) -add_huff_table (j_compress_ptr cinfo, - JHUFF_TBL **htblptr, const UINT8 *bits, const UINT8 *val) -/* Define a Huffman table */ -{ - int nsymbols, len; - - if (*htblptr == NULL) - *htblptr = jpeg_alloc_huff_table((j_common_ptr) cinfo); - - /* Copy the number-of-symbols-of-each-code-length counts */ - MEMCOPY((*htblptr)->bits, bits, SIZEOF((*htblptr)->bits)); - - /* Validate the counts. We do this here mainly so we can copy the right - * number of symbols from the val[] array, without risking marching off - * the end of memory. jchuff.c will do a more thorough test later. - */ - nsymbols = 0; - for (len = 1; len <= 16; len++) - nsymbols += bits[len]; - if (nsymbols < 1 || nsymbols > 256) - ERREXIT(cinfo, JERR_BAD_HUFF_TABLE); - - MEMCOPY((*htblptr)->huffval, val, nsymbols * SIZEOF(UINT8)); - - /* Initialize sent_table FALSE so table will be written to JPEG file. */ - (*htblptr)->sent_table = FALSE; -} - - -LOCAL(void) -std_huff_tables (j_compress_ptr cinfo) -/* Set up the standard Huffman tables (cf. JPEG standard section K.3) */ -/* IMPORTANT: these are only valid for 8-bit data precision! */ -{ - static const UINT8 bits_dc_luminance[17] = - { /* 0-base */ 0, 0, 1, 5, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0 }; - static const UINT8 val_dc_luminance[] = - { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 }; - - static const UINT8 bits_dc_chrominance[17] = - { /* 0-base */ 0, 0, 3, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0 }; - static const UINT8 val_dc_chrominance[] = - { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 }; - - static const UINT8 bits_ac_luminance[17] = - { /* 0-base */ 0, 0, 2, 1, 3, 3, 2, 4, 3, 5, 5, 4, 4, 0, 0, 1, 0x7d }; - static const UINT8 val_ac_luminance[] = - { 0x01, 0x02, 0x03, 0x00, 0x04, 0x11, 0x05, 0x12, - 0x21, 0x31, 0x41, 0x06, 0x13, 0x51, 0x61, 0x07, - 0x22, 0x71, 0x14, 0x32, 0x81, 0x91, 0xa1, 0x08, - 0x23, 0x42, 0xb1, 0xc1, 0x15, 0x52, 0xd1, 0xf0, - 0x24, 0x33, 0x62, 0x72, 0x82, 0x09, 0x0a, 0x16, - 0x17, 0x18, 0x19, 0x1a, 0x25, 0x26, 0x27, 0x28, - 0x29, 0x2a, 0x34, 0x35, 0x36, 0x37, 0x38, 0x39, - 0x3a, 0x43, 0x44, 0x45, 0x46, 0x47, 0x48, 0x49, - 0x4a, 0x53, 0x54, 0x55, 0x56, 0x57, 0x58, 0x59, - 0x5a, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, 0x69, - 0x6a, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, 0x79, - 0x7a, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, - 0x8a, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, 0x98, - 0x99, 0x9a, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, - 0xa8, 0xa9, 0xaa, 0xb2, 0xb3, 0xb4, 0xb5, 0xb6, - 0xb7, 0xb8, 0xb9, 0xba, 0xc2, 0xc3, 0xc4, 0xc5, - 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xd2, 0xd3, 0xd4, - 0xd5, 0xd6, 0xd7, 0xd8, 0xd9, 0xda, 0xe1, 0xe2, - 0xe3, 0xe4, 0xe5, 0xe6, 0xe7, 0xe8, 0xe9, 0xea, - 0xf1, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7, 0xf8, - 0xf9, 0xfa }; - - static const UINT8 bits_ac_chrominance[17] = - { /* 0-base */ 0, 0, 2, 1, 2, 4, 4, 3, 4, 7, 5, 4, 4, 0, 1, 2, 0x77 }; - static const UINT8 val_ac_chrominance[] = - { 0x00, 0x01, 0x02, 0x03, 0x11, 0x04, 0x05, 0x21, - 0x31, 0x06, 0x12, 0x41, 0x51, 0x07, 0x61, 0x71, - 0x13, 0x22, 0x32, 0x81, 0x08, 0x14, 0x42, 0x91, - 0xa1, 0xb1, 0xc1, 0x09, 0x23, 0x33, 0x52, 0xf0, - 0x15, 0x62, 0x72, 0xd1, 0x0a, 0x16, 0x24, 0x34, - 0xe1, 0x25, 0xf1, 0x17, 0x18, 0x19, 0x1a, 0x26, - 0x27, 0x28, 0x29, 0x2a, 0x35, 0x36, 0x37, 0x38, - 0x39, 0x3a, 0x43, 0x44, 0x45, 0x46, 0x47, 0x48, - 0x49, 0x4a, 0x53, 0x54, 0x55, 0x56, 0x57, 0x58, - 0x59, 0x5a, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, - 0x69, 0x6a, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, - 0x79, 0x7a, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, - 0x88, 0x89, 0x8a, 0x92, 0x93, 0x94, 0x95, 0x96, - 0x97, 0x98, 0x99, 0x9a, 0xa2, 0xa3, 0xa4, 0xa5, - 0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xb2, 0xb3, 0xb4, - 0xb5, 0xb6, 0xb7, 0xb8, 0xb9, 0xba, 0xc2, 0xc3, - 0xc4, 0xc5, 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xd2, - 0xd3, 0xd4, 0xd5, 0xd6, 0xd7, 0xd8, 0xd9, 0xda, - 0xe2, 0xe3, 0xe4, 0xe5, 0xe6, 0xe7, 0xe8, 0xe9, - 0xea, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7, 0xf8, - 0xf9, 0xfa }; - - add_huff_table(cinfo, &cinfo->dc_huff_tbl_ptrs[0], - bits_dc_luminance, val_dc_luminance); - add_huff_table(cinfo, &cinfo->ac_huff_tbl_ptrs[0], - bits_ac_luminance, val_ac_luminance); - add_huff_table(cinfo, &cinfo->dc_huff_tbl_ptrs[1], - bits_dc_chrominance, val_dc_chrominance); - add_huff_table(cinfo, &cinfo->ac_huff_tbl_ptrs[1], - bits_ac_chrominance, val_ac_chrominance); -} - - -/* - * Default parameter setup for compression. - * - * Applications that don't choose to use this routine must do their - * own setup of all these parameters. Alternately, you can call this - * to establish defaults and then alter parameters selectively. This - * is the recommended approach since, if we add any new parameters, - * your code will still work (they'll be set to reasonable defaults). - */ - -GLOBAL(void) -jpeg_set_defaults (j_compress_ptr cinfo) -{ - int i; - - /* Safety check to ensure start_compress not called yet. */ - if (cinfo->global_state != CSTATE_START) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - - /* Allocate comp_info array large enough for maximum component count. - * Array is made permanent in case application wants to compress - * multiple images at same param settings. - */ - if (cinfo->comp_info == NULL) - cinfo->comp_info = (jpeg_component_info *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, - MAX_COMPONENTS * SIZEOF(jpeg_component_info)); - - /* Initialize everything not dependent on the color space */ - - cinfo->scale_num = 1; /* 1:1 scaling */ - cinfo->scale_denom = 1; - cinfo->data_precision = BITS_IN_JSAMPLE; - /* Set up two quantization tables using default quality of 75 */ - jpeg_set_quality(cinfo, 75, TRUE); - /* Set up two Huffman tables */ - std_huff_tables(cinfo); - - /* Initialize default arithmetic coding conditioning */ - for (i = 0; i < NUM_ARITH_TBLS; i++) { - cinfo->arith_dc_L[i] = 0; - cinfo->arith_dc_U[i] = 1; - cinfo->arith_ac_K[i] = 5; - } - - /* Default is no multiple-scan output */ - cinfo->scan_info = NULL; - cinfo->num_scans = 0; - - /* Expect normal source image, not raw downsampled data */ - cinfo->raw_data_in = FALSE; - - /* Use Huffman coding, not arithmetic coding, by default */ - cinfo->arith_code = FALSE; - - /* By default, don't do extra passes to optimize entropy coding */ - cinfo->optimize_coding = FALSE; - /* The standard Huffman tables are only valid for 8-bit data precision. - * If the precision is higher, force optimization on so that usable - * tables will be computed. This test can be removed if default tables - * are supplied that are valid for the desired precision. - */ - if (cinfo->data_precision > 8) - cinfo->optimize_coding = TRUE; - - /* By default, use the simpler non-cosited sampling alignment */ - cinfo->CCIR601_sampling = FALSE; - - /* By default, apply fancy downsampling */ - cinfo->do_fancy_downsampling = TRUE; - - /* No input smoothing */ - cinfo->smoothing_factor = 0; - - /* DCT algorithm preference */ - cinfo->dct_method = JDCT_DEFAULT; - - /* No restart markers */ - cinfo->restart_interval = 0; - cinfo->restart_in_rows = 0; - - /* Fill in default JFIF marker parameters. Note that whether the marker - * will actually be written is determined by jpeg_set_colorspace. - * - * By default, the library emits JFIF version code 1.01. - * An application that wants to emit JFIF 1.02 extension markers should set - * JFIF_minor_version to 2. We could probably get away with just defaulting - * to 1.02, but there may still be some decoders in use that will complain - * about that; saying 1.01 should minimize compatibility problems. - */ - cinfo->JFIF_major_version = 1; /* Default JFIF version = 1.01 */ - cinfo->JFIF_minor_version = 1; - cinfo->density_unit = 0; /* Pixel size is unknown by default */ - cinfo->X_density = 1; /* Pixel aspect ratio is square by default */ - cinfo->Y_density = 1; - - /* Choose JPEG colorspace based on input space, set defaults accordingly */ - - jpeg_default_colorspace(cinfo); -} - - -/* - * Select an appropriate JPEG colorspace for in_color_space. - */ - -GLOBAL(void) -jpeg_default_colorspace (j_compress_ptr cinfo) -{ - switch (cinfo->in_color_space) { - case JCS_GRAYSCALE: - jpeg_set_colorspace(cinfo, JCS_GRAYSCALE); - break; - case JCS_RGB: - jpeg_set_colorspace(cinfo, JCS_YCbCr); - break; - case JCS_YCbCr: - jpeg_set_colorspace(cinfo, JCS_YCbCr); - break; - case JCS_CMYK: - jpeg_set_colorspace(cinfo, JCS_CMYK); /* By default, no translation */ - break; - case JCS_YCCK: - jpeg_set_colorspace(cinfo, JCS_YCCK); - break; - case JCS_UNKNOWN: - jpeg_set_colorspace(cinfo, JCS_UNKNOWN); - break; - default: - ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE); - } -} - - -/* - * Set the JPEG colorspace, and choose colorspace-dependent default values. - */ - -GLOBAL(void) -jpeg_set_colorspace (j_compress_ptr cinfo, J_COLOR_SPACE colorspace) -{ - jpeg_component_info * compptr; - int ci; - -#define SET_COMP(index,id,hsamp,vsamp,quant,dctbl,actbl) \ - (compptr = &cinfo->comp_info[index], \ - compptr->component_id = (id), \ - compptr->h_samp_factor = (hsamp), \ - compptr->v_samp_factor = (vsamp), \ - compptr->quant_tbl_no = (quant), \ - compptr->dc_tbl_no = (dctbl), \ - compptr->ac_tbl_no = (actbl) ) - - /* Safety check to ensure start_compress not called yet. */ - if (cinfo->global_state != CSTATE_START) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - - /* For all colorspaces, we use Q and Huff tables 0 for luminance components, - * tables 1 for chrominance components. - */ - - cinfo->jpeg_color_space = colorspace; - - cinfo->write_JFIF_header = FALSE; /* No marker for non-JFIF colorspaces */ - cinfo->write_Adobe_marker = FALSE; /* write no Adobe marker by default */ - - switch (colorspace) { - case JCS_GRAYSCALE: - cinfo->write_JFIF_header = TRUE; /* Write a JFIF marker */ - cinfo->num_components = 1; - /* JFIF specifies component ID 1 */ - SET_COMP(0, 1, 1,1, 0, 0,0); - break; - case JCS_RGB: - cinfo->write_Adobe_marker = TRUE; /* write Adobe marker to flag RGB */ - cinfo->num_components = 3; - SET_COMP(0, 0x52 /* 'R' */, 1,1, 0, 0,0); - SET_COMP(1, 0x47 /* 'G' */, 1,1, 0, 0,0); - SET_COMP(2, 0x42 /* 'B' */, 1,1, 0, 0,0); - break; - case JCS_YCbCr: - cinfo->write_JFIF_header = TRUE; /* Write a JFIF marker */ - cinfo->num_components = 3; - /* JFIF specifies component IDs 1,2,3 */ - /* We default to 2x2 subsamples of chrominance */ - SET_COMP(0, 1, 2,2, 0, 0,0); - SET_COMP(1, 2, 1,1, 1, 1,1); - SET_COMP(2, 3, 1,1, 1, 1,1); - break; - case JCS_CMYK: - cinfo->write_Adobe_marker = TRUE; /* write Adobe marker to flag CMYK */ - cinfo->num_components = 4; - SET_COMP(0, 0x43 /* 'C' */, 1,1, 0, 0,0); - SET_COMP(1, 0x4D /* 'M' */, 1,1, 0, 0,0); - SET_COMP(2, 0x59 /* 'Y' */, 1,1, 0, 0,0); - SET_COMP(3, 0x4B /* 'K' */, 1,1, 0, 0,0); - break; - case JCS_YCCK: - cinfo->write_Adobe_marker = TRUE; /* write Adobe marker to flag YCCK */ - cinfo->num_components = 4; - SET_COMP(0, 1, 2,2, 0, 0,0); - SET_COMP(1, 2, 1,1, 1, 1,1); - SET_COMP(2, 3, 1,1, 1, 1,1); - SET_COMP(3, 4, 2,2, 0, 0,0); - break; - case JCS_UNKNOWN: - cinfo->num_components = cinfo->input_components; - if (cinfo->num_components < 1 || cinfo->num_components > MAX_COMPONENTS) - ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->num_components, - MAX_COMPONENTS); - for (ci = 0; ci < cinfo->num_components; ci++) { - SET_COMP(ci, ci, 1,1, 0, 0,0); - } - break; - default: - ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); - } -} - - -#ifdef C_PROGRESSIVE_SUPPORTED - -LOCAL(jpeg_scan_info *) -fill_a_scan (jpeg_scan_info * scanptr, int ci, - int Ss, int Se, int Ah, int Al) -/* Support routine: generate one scan for specified component */ -{ - scanptr->comps_in_scan = 1; - scanptr->component_index[0] = ci; - scanptr->Ss = Ss; - scanptr->Se = Se; - scanptr->Ah = Ah; - scanptr->Al = Al; - scanptr++; - return scanptr; -} - -LOCAL(jpeg_scan_info *) -fill_scans (jpeg_scan_info * scanptr, int ncomps, - int Ss, int Se, int Ah, int Al) -/* Support routine: generate one scan for each component */ -{ - int ci; - - for (ci = 0; ci < ncomps; ci++) { - scanptr->comps_in_scan = 1; - scanptr->component_index[0] = ci; - scanptr->Ss = Ss; - scanptr->Se = Se; - scanptr->Ah = Ah; - scanptr->Al = Al; - scanptr++; - } - return scanptr; -} - -LOCAL(jpeg_scan_info *) -fill_dc_scans (jpeg_scan_info * scanptr, int ncomps, int Ah, int Al) -/* Support routine: generate interleaved DC scan if possible, else N scans */ -{ - int ci; - - if (ncomps <= MAX_COMPS_IN_SCAN) { - /* Single interleaved DC scan */ - scanptr->comps_in_scan = ncomps; - for (ci = 0; ci < ncomps; ci++) - scanptr->component_index[ci] = ci; - scanptr->Ss = scanptr->Se = 0; - scanptr->Ah = Ah; - scanptr->Al = Al; - scanptr++; - } else { - /* Noninterleaved DC scan for each component */ - scanptr = fill_scans(scanptr, ncomps, 0, 0, Ah, Al); - } - return scanptr; -} - - -/* - * Create a recommended progressive-JPEG script. - * cinfo->num_components and cinfo->jpeg_color_space must be correct. - */ - -GLOBAL(void) -jpeg_simple_progression (j_compress_ptr cinfo) -{ - int ncomps = cinfo->num_components; - int nscans; - jpeg_scan_info * scanptr; - - /* Safety check to ensure start_compress not called yet. */ - if (cinfo->global_state != CSTATE_START) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - - /* Figure space needed for script. Calculation must match code below! */ - if (ncomps == 3 && cinfo->jpeg_color_space == JCS_YCbCr) { - /* Custom script for YCbCr color images. */ - nscans = 10; - } else { - /* All-purpose script for other color spaces. */ - if (ncomps > MAX_COMPS_IN_SCAN) - nscans = 6 * ncomps; /* 2 DC + 4 AC scans per component */ - else - nscans = 2 + 4 * ncomps; /* 2 DC scans; 4 AC scans per component */ - } - - /* Allocate space for script. - * We need to put it in the permanent pool in case the application performs - * multiple compressions without changing the settings. To avoid a memory - * leak if jpeg_simple_progression is called repeatedly for the same JPEG - * object, we try to re-use previously allocated space, and we allocate - * enough space to handle YCbCr even if initially asked for grayscale. - */ - if (cinfo->script_space == NULL || cinfo->script_space_size < nscans) { - cinfo->script_space_size = MAX(nscans, 10); - cinfo->script_space = (jpeg_scan_info *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, - cinfo->script_space_size * SIZEOF(jpeg_scan_info)); - } - scanptr = cinfo->script_space; - cinfo->scan_info = scanptr; - cinfo->num_scans = nscans; - - if (ncomps == 3 && cinfo->jpeg_color_space == JCS_YCbCr) { - /* Custom script for YCbCr color images. */ - /* Initial DC scan */ - scanptr = fill_dc_scans(scanptr, ncomps, 0, 1); - /* Initial AC scan: get some luma data out in a hurry */ - scanptr = fill_a_scan(scanptr, 0, 1, 5, 0, 2); - /* Chroma data is too small to be worth expending many scans on */ - scanptr = fill_a_scan(scanptr, 2, 1, 63, 0, 1); - scanptr = fill_a_scan(scanptr, 1, 1, 63, 0, 1); - /* Complete spectral selection for luma AC */ - scanptr = fill_a_scan(scanptr, 0, 6, 63, 0, 2); - /* Refine next bit of luma AC */ - scanptr = fill_a_scan(scanptr, 0, 1, 63, 2, 1); - /* Finish DC successive approximation */ - scanptr = fill_dc_scans(scanptr, ncomps, 1, 0); - /* Finish AC successive approximation */ - scanptr = fill_a_scan(scanptr, 2, 1, 63, 1, 0); - scanptr = fill_a_scan(scanptr, 1, 1, 63, 1, 0); - /* Luma bottom bit comes last since it's usually largest scan */ - scanptr = fill_a_scan(scanptr, 0, 1, 63, 1, 0); - } else { - /* All-purpose script for other color spaces. */ - /* Successive approximation first pass */ - scanptr = fill_dc_scans(scanptr, ncomps, 0, 1); - scanptr = fill_scans(scanptr, ncomps, 1, 5, 0, 2); - scanptr = fill_scans(scanptr, ncomps, 6, 63, 0, 2); - /* Successive approximation second pass */ - scanptr = fill_scans(scanptr, ncomps, 1, 63, 2, 1); - /* Successive approximation final pass */ - scanptr = fill_dc_scans(scanptr, ncomps, 1, 0); - scanptr = fill_scans(scanptr, ncomps, 1, 63, 1, 0); - } -} - -#endif /* C_PROGRESSIVE_SUPPORTED */