1 #
   2 # This is the "master security properties file".
   3 #
   4 # An alternate java.security properties file may be specified
   5 # from the command line via the system property
   6 #
   7 #    -Djava.security.properties=<URL>
   8 #
   9 # This properties file appends to the master security properties file.
  10 # If both properties files specify values for the same key, the value
  11 # from the command-line properties file is selected, as it is the last
  12 # one loaded.
  13 #
  14 # Also, if you specify
  15 #
  16 #    -Djava.security.properties==<URL> (2 equals),
  17 #
  18 # then that properties file completely overrides the master security
  19 # properties file.
  20 #
  21 # To disable the ability to specify an additional properties file from
  22 # the command line, set the key security.overridePropertiesFile
  23 # to false in the master security properties file. It is set to true
  24 # by default.
  25 
  26 # In this file, various security properties are set for use by
  27 # java.security classes. This is where users can statically register
  28 # Cryptography Package Providers ("providers" for short). The term
  29 # "provider" refers to a package or set of packages that supply a
  30 # concrete implementation of a subset of the cryptography aspects of
  31 # the Java Security API. A provider may, for example, implement one or
  32 # more digital signature algorithms or message digest algorithms.
  33 #
  34 # Each provider must implement a subclass of the Provider class.
  35 # To register a provider in this master security properties file,
  36 # specify the Provider subclass name and priority in the format
  37 #
  38 #    security.provider.<n>=<className>
  39 #
  40 # This declares a provider, and specifies its preference
  41 # order n. The preference order is the order in which providers are
  42 # searched for requested algorithms (when no specific provider is
  43 # requested). The order is 1-based; 1 is the most preferred, followed
  44 # by 2, and so on.
  45 #
  46 # <className> must specify the subclass of the Provider class whose
  47 # constructor sets the values of various properties that are required
  48 # for the Java Security API to look up the algorithms or other
  49 # facilities implemented by the provider.
  50 #
  51 # There must be at least one provider specification in java.security.
  52 # There is a default provider that comes standard with the JDK. It
  53 # is called the "SUN" provider, and its Provider subclass
  54 # named Sun appears in the sun.security.provider package. Thus, the
  55 # "SUN" provider is registered via the following:
  56 #
  57 #    security.provider.1=sun.security.provider.Sun
  58 #
  59 # (The number 1 is used for the default provider.)
  60 #
  61 # Note: Providers can be dynamically registered instead by calls to
  62 # either the addProvider or insertProviderAt method in the Security
  63 # class.
  64 
  65 #
  66 # List of providers and their preference orders (see above):
  67 #
  68 security.provider.1=sun.security.provider.Sun
  69 security.provider.2=sun.security.rsa.SunRsaSign
  70 security.provider.3=sun.security.ec.SunEC
  71 security.provider.4=com.sun.net.ssl.internal.ssl.Provider
  72 security.provider.5=com.sun.crypto.provider.SunJCE
  73 security.provider.6=sun.security.jgss.SunProvider
  74 security.provider.7=com.sun.security.sasl.Provider
  75 security.provider.8=org.jcp.xml.dsig.internal.dom.XMLDSigRI
  76 security.provider.9=sun.security.smartcardio.SunPCSC
  77 
  78 #
  79 # Sun Provider SecureRandom seed source.
  80 #
  81 # Select the primary source of seed data for the "SHA1PRNG" and
  82 # "NativePRNG" SecureRandom implementations in the "Sun" provider.
  83 # (Other SecureRandom implementations might also use this property.)
  84 #
  85 # On Unix-like systems (for example, Solaris/Linux/MacOS), the
  86 # "NativePRNG" and "SHA1PRNG" implementations obtains seed data from
  87 # special device files such as file:/dev/random.
  88 #
  89 # On Windows systems, specifying the URLs "file:/dev/random" or
  90 # "file:/dev/urandom" will enable the native Microsoft CryptoAPI seeding
  91 # mechanism for SHA1PRNG.
  92 #
  93 # By default, an attempt is made to use the entropy gathering device
  94 # specified by the "securerandom.source" Security property.  If an
  95 # exception occurs while accessing the specified URL:
  96 #
  97 #     SHA1PRNG:
  98 #         the traditional system/thread activity algorithm will be used.
  99 #
 100 #     NativePRNG:
 101 #         a default value of /dev/random will be used.  If neither
 102 #         are available, the implementation will be disabled.
 103 #         "file" is the only currently supported protocol type.
 104 #
 105 # The entropy gathering device can also be specified with the System
 106 # property "java.security.egd". For example:
 107 #
 108 #   % java -Djava.security.egd=file:/dev/random MainClass
 109 #
 110 # Specifying this System property will override the
 111 # "securerandom.source" Security property.
 112 #
 113 # In addition, if "file:/dev/random" or "file:/dev/urandom" is
 114 # specified, the "NativePRNG" implementation will be more preferred than
 115 # SHA1PRNG in the Sun provider.
 116 #
 117 securerandom.source=file:/dev/random
 118 
 119 #
 120 # A list of known strong SecureRandom implementations.
 121 #
 122 # To help guide applications in selecting a suitable strong
 123 # java.security.SecureRandom implementation, Java distributions should
 124 # indicate a list of known strong implementations using the property.
 125 #
 126 # This is a comma-separated list of algorithm and/or algorithm:provider
 127 # entries.
 128 #
 129 securerandom.strongAlgorithms=NativePRNGBlocking:SUN
 130 
 131 #
 132 # Class to instantiate as the javax.security.auth.login.Configuration
 133 # provider.
 134 #
 135 login.configuration.provider=com.sun.security.auth.login.ConfigFile
 136 
 137 #
 138 # Default login configuration file
 139 #
 140 #login.config.url.1=file:${user.home}/.java.login.config
 141 
 142 #
 143 # Class to instantiate as the system Policy. This is the name of the class
 144 # that will be used as the Policy object.
 145 #
 146 policy.provider=sun.security.provider.PolicyFile
 147 
 148 # The default is to have a single system-wide policy file,
 149 # and a policy file in the user's home directory.
 150 policy.url.1=file:${java.home}/lib/security/java.policy
 151 policy.url.2=file:${user.home}/.java.policy
 152 
 153 # whether or not we expand properties in the policy file
 154 # if this is set to false, properties (${...}) will not be expanded in policy
 155 # files.
 156 policy.expandProperties=true
 157 
 158 # whether or not we allow an extra policy to be passed on the command line
 159 # with -Djava.security.policy=somefile. Comment out this line to disable
 160 # this feature.
 161 policy.allowSystemProperty=true
 162 
 163 # whether or not we look into the IdentityScope for trusted Identities
 164 # when encountering a 1.1 signed JAR file. If the identity is found
 165 # and is trusted, we grant it AllPermission.
 166 policy.ignoreIdentityScope=false
 167 
 168 #
 169 # Default keystore type.
 170 #
 171 keystore.type=jks
 172 
 173 #
 174 # List of comma-separated packages that start with or equal this string
 175 # will cause a security exception to be thrown when
 176 # passed to checkPackageAccess unless the
 177 # corresponding RuntimePermission ("accessClassInPackage."+package) has
 178 # been granted.
 179 package.access=sun.,\
 180                com.sun.corba.se.impl.,\
 181                com.sun.xml.internal.,\
 182                com.sun.imageio.,\
 183                com.sun.istack.internal.,\
 184                com.sun.jmx.,\
 185                com.sun.proxy.,\
 186                com.sun.org.apache.bcel.internal.,\
 187                com.sun.org.apache.regexp.internal.,\
 188                com.sun.org.apache.xerces.internal.,\
 189                com.sun.org.apache.xpath.internal.,\
 190                com.sun.org.apache.xalan.internal.extensions.,\
 191                com.sun.org.apache.xalan.internal.lib.,\
 192                com.sun.org.apache.xalan.internal.res.,\
 193                com.sun.org.apache.xalan.internal.templates.,\
 194                com.sun.org.apache.xalan.internal.utils.,\
 195                com.sun.org.apache.xalan.internal.xslt.,\
 196                com.sun.org.apache.xalan.internal.xsltc.cmdline.,\
 197                com.sun.org.apache.xalan.internal.xsltc.compiler.,\
 198                com.sun.org.apache.xalan.internal.xsltc.trax.,\
 199                com.sun.org.apache.xalan.internal.xsltc.util.,\
 200                com.sun.org.apache.xml.internal.res.,\
 201                com.sun.org.apache.xml.internal.serializer.utils.,\
 202                com.sun.org.apache.xml.internal.utils.,\
 203                com.sun.org.glassfish.,\
 204                com.oracle.xmlns.internal.,\
 205                com.oracle.webservices.internal.,\
 206                jdk.internal.,\
 207                jdk.nashorn.internal.,\
 208                jdk.nashorn.tools.
 209 
 210 
 211 #
 212 # List of comma-separated packages that start with or equal this string
 213 # will cause a security exception to be thrown when
 214 # passed to checkPackageDefinition unless the
 215 # corresponding RuntimePermission ("defineClassInPackage."+package) has
 216 # been granted.
 217 #
 218 # by default, none of the class loaders supplied with the JDK call
 219 # checkPackageDefinition.
 220 #
 221 package.definition=sun.,\
 222                    com.sun.corba.se.impl.,\
 223                    com.sun.xml.internal.,\
 224                    com.sun.imageio.,\
 225                    com.sun.istack.internal.,\
 226                    com.sun.jmx.,\
 227                    com.sun.proxy.,\
 228                    com.sun.org.apache.bcel.internal.,\
 229                    com.sun.org.apache.regexp.internal.,\
 230                    com.sun.org.apache.xerces.internal.,\
 231                    com.sun.org.apache.xpath.internal.,\
 232                    com.sun.org.apache.xalan.internal.extensions.,\
 233                    com.sun.org.apache.xalan.internal.lib.,\
 234                    com.sun.org.apache.xalan.internal.res.,\
 235                    com.sun.org.apache.xalan.internal.templates.,\
 236                    com.sun.org.apache.xalan.internal.utils.,\
 237                    com.sun.org.apache.xalan.internal.xslt.,\
 238                    com.sun.org.apache.xalan.internal.xsltc.cmdline.,\
 239                    com.sun.org.apache.xalan.internal.xsltc.compiler.,\
 240                    com.sun.org.apache.xalan.internal.xsltc.trax.,\
 241                    com.sun.org.apache.xalan.internal.xsltc.util.,\
 242                    com.sun.org.apache.xml.internal.res.,\
 243                    com.sun.org.apache.xml.internal.serializer.utils.,\
 244                    com.sun.org.apache.xml.internal.utils.,\
 245                    com.sun.org.glassfish.,\
 246                    com.oracle.xmlns.internal.,\
 247                    com.oracle.webservices.internal.,\
 248                    jdk.internal.,\
 249                    jdk.nashorn.internal.,\
 250                    jdk.nashorn.tools.
 251 
 252 
 253 #
 254 # Determines whether this properties file can be appended to
 255 # or overridden on the command line via -Djava.security.properties
 256 #
 257 security.overridePropertiesFile=true
 258 
 259 #
 260 # Determines the default key and trust manager factory algorithms for
 261 # the javax.net.ssl package.
 262 #
 263 ssl.KeyManagerFactory.algorithm=SunX509
 264 ssl.TrustManagerFactory.algorithm=PKIX
 265 
 266 #
 267 # The Java-level namelookup cache policy for successful lookups:
 268 #
 269 # any negative value: caching forever
 270 # any positive value: the number of seconds to cache an address for
 271 # zero: do not cache
 272 #
 273 # default value is forever (FOREVER). For security reasons, this
 274 # caching is made forever when a security manager is set. When a security
 275 # manager is not set, the default behavior in this implementation
 276 # is to cache for 30 seconds.
 277 #
 278 # NOTE: setting this to anything other than the default value can have
 279 #       serious security implications. Do not set it unless
 280 #       you are sure you are not exposed to DNS spoofing attack.
 281 #
 282 #networkaddress.cache.ttl=-1
 283 
 284 # The Java-level namelookup cache policy for failed lookups:
 285 #
 286 # any negative value: cache forever
 287 # any positive value: the number of seconds to cache negative lookup results
 288 # zero: do not cache
 289 #
 290 # In some Microsoft Windows networking environments that employ
 291 # the WINS name service in addition to DNS, name service lookups
 292 # that fail may take a noticeably long time to return (approx. 5 seconds).
 293 # For this reason the default caching policy is to maintain these
 294 # results for 10 seconds.
 295 #
 296 #
 297 networkaddress.cache.negative.ttl=10
 298 
 299 #
 300 # Properties to configure OCSP for certificate revocation checking
 301 #
 302 
 303 # Enable OCSP
 304 #
 305 # By default, OCSP is not used for certificate revocation checking.
 306 # This property enables the use of OCSP when set to the value "true".
 307 #
 308 # NOTE: SocketPermission is required to connect to an OCSP responder.
 309 #
 310 # Example,
 311 #   ocsp.enable=true
 312 
 313 #
 314 # Location of the OCSP responder
 315 #
 316 # By default, the location of the OCSP responder is determined implicitly
 317 # from the certificate being validated. This property explicitly specifies
 318 # the location of the OCSP responder. The property is used when the
 319 # Authority Information Access extension (defined in RFC 3280) is absent
 320 # from the certificate or when it requires overriding.
 321 #
 322 # Example,
 323 #   ocsp.responderURL=http://ocsp.example.net:80
 324 
 325 #
 326 # Subject name of the OCSP responder's certificate
 327 #
 328 # By default, the certificate of the OCSP responder is that of the issuer
 329 # of the certificate being validated. This property identifies the certificate
 330 # of the OCSP responder when the default does not apply. Its value is a string
 331 # distinguished name (defined in RFC 2253) which identifies a certificate in
 332 # the set of certificates supplied during cert path validation. In cases where
 333 # the subject name alone is not sufficient to uniquely identify the certificate
 334 # then both the "ocsp.responderCertIssuerName" and
 335 # "ocsp.responderCertSerialNumber" properties must be used instead. When this
 336 # property is set then those two properties are ignored.
 337 #
 338 # Example,
 339 #   ocsp.responderCertSubjectName="CN=OCSP Responder, O=XYZ Corp"
 340 
 341 #
 342 # Issuer name of the OCSP responder's certificate
 343 #
 344 # By default, the certificate of the OCSP responder is that of the issuer
 345 # of the certificate being validated. This property identifies the certificate
 346 # of the OCSP responder when the default does not apply. Its value is a string
 347 # distinguished name (defined in RFC 2253) which identifies a certificate in
 348 # the set of certificates supplied during cert path validation. When this
 349 # property is set then the "ocsp.responderCertSerialNumber" property must also
 350 # be set. When the "ocsp.responderCertSubjectName" property is set then this
 351 # property is ignored.
 352 #
 353 # Example,
 354 #   ocsp.responderCertIssuerName="CN=Enterprise CA, O=XYZ Corp"
 355 
 356 #
 357 # Serial number of the OCSP responder's certificate
 358 #
 359 # By default, the certificate of the OCSP responder is that of the issuer
 360 # of the certificate being validated. This property identifies the certificate
 361 # of the OCSP responder when the default does not apply. Its value is a string
 362 # of hexadecimal digits (colon or space separators may be present) which
 363 # identifies a certificate in the set of certificates supplied during cert path
 364 # validation. When this property is set then the "ocsp.responderCertIssuerName"
 365 # property must also be set. When the "ocsp.responderCertSubjectName" property
 366 # is set then this property is ignored.
 367 #
 368 # Example,
 369 #   ocsp.responderCertSerialNumber=2A:FF:00
 370 
 371 #
 372 # Policy for failed Kerberos KDC lookups:
 373 #
 374 # When a KDC is unavailable (network error, service failure, etc), it is
 375 # put inside a blacklist and accessed less often for future requests. The
 376 # value (case-insensitive) for this policy can be:
 377 #
 378 # tryLast
 379 #    KDCs in the blacklist are always tried after those not on the list.
 380 #
 381 # tryLess[:max_retries,timeout]
 382 #    KDCs in the blacklist are still tried by their order in the configuration,
 383 #    but with smaller max_retries and timeout values. max_retries and timeout
 384 #    are optional numerical parameters (default 1 and 5000, which means once
 385 #    and 5 seconds). Please notes that if any of the values defined here is
 386 #    more than what is defined in krb5.conf, it will be ignored.
 387 #
 388 # Whenever a KDC is detected as available, it is removed from the blacklist.
 389 # The blacklist is reset when krb5.conf is reloaded. You can add
 390 # refreshKrb5Config=true to a JAAS configuration file so that krb5.conf is
 391 # reloaded whenever a JAAS authentication is attempted.
 392 #
 393 # Example,
 394 #   krb5.kdc.bad.policy = tryLast
 395 #   krb5.kdc.bad.policy = tryLess:2,2000
 396 krb5.kdc.bad.policy = tryLast
 397 
 398 # Algorithm restrictions for certification path (CertPath) processing
 399 #
 400 # In some environments, certain algorithms or key lengths may be undesirable
 401 # for certification path building and validation.  For example, "MD2" is
 402 # generally no longer considered to be a secure hash algorithm.  This section
 403 # describes the mechanism for disabling algorithms based on algorithm name
 404 # and/or key length.  This includes algorithms used in certificates, as well
 405 # as revocation information such as CRLs and signed OCSP Responses.
 406 #
 407 # The syntax of the disabled algorithm string is described as this Java
 408 # BNF-style:
 409 #   DisabledAlgorithms:
 410 #       " DisabledAlgorithm { , DisabledAlgorithm } "
 411 #
 412 #   DisabledAlgorithm:
 413 #       AlgorithmName [Constraint]
 414 #
 415 #   AlgorithmName:
 416 #       (see below)
 417 #
 418 #   Constraint:
 419 #       KeySizeConstraint
 420 #
 421 #   KeySizeConstraint:
 422 #       keySize Operator DecimalInteger
 423 #
 424 #   Operator:
 425 #       <= | < | == | != | >= | >
 426 #
 427 #   DecimalInteger:
 428 #       DecimalDigits
 429 #
 430 #   DecimalDigits:
 431 #       DecimalDigit {DecimalDigit}
 432 #
 433 #   DecimalDigit: one of
 434 #       1 2 3 4 5 6 7 8 9 0
 435 #
 436 # The "AlgorithmName" is the standard algorithm name of the disabled
 437 # algorithm. See "Java Cryptography Architecture Standard Algorithm Name
 438 # Documentation" for information about Standard Algorithm Names.  Matching
 439 # is performed using a case-insensitive sub-element matching rule.  (For
 440 # example, in "SHA1withECDSA" the sub-elements are "SHA1" for hashing and
 441 # "ECDSA" for signatures.)  If the assertion "AlgorithmName" is a
 442 # sub-element of the certificate algorithm name, the algorithm will be
 443 # rejected during certification path building and validation.  For example,
 444 # the assertion algorithm name "DSA" will disable all certificate algorithms
 445 # that rely on DSA, such as NONEwithDSA, SHA1withDSA.  However, the assertion
 446 # will not disable algorithms related to "ECDSA".
 447 #
 448 # A "Constraint" provides further guidance for the algorithm being specified.
 449 # The "KeySizeConstraint" requires a key of a valid size range if the
 450 # "AlgorithmName" is of a key algorithm.  The "DecimalInteger" indicates the
 451 # key size specified in number of bits.  For example, "RSA keySize <= 1024"
 452 # indicates that any RSA key with key size less than or equal to 1024 bits
 453 # should be disabled, and "RSA keySize < 1024, RSA keySize > 2048" indicates
 454 # that any RSA key with key size less than 1024 or greater than 2048 should
 455 # be disabled. Note that the "KeySizeConstraint" only makes sense to key
 456 # algorithms.
 457 #
 458 # Note: This property is currently used by Oracle's PKIX implementation. It
 459 # is not guaranteed to be examined and used by other implementations.
 460 #
 461 # Example:
 462 #   jdk.certpath.disabledAlgorithms=MD2, DSA, RSA keySize < 2048
 463 #
 464 #
 465 jdk.certpath.disabledAlgorithms=MD2, RSA keySize < 1024
 466 
 467 # Algorithm restrictions for Secure Socket Layer/Transport Layer Security
 468 # (SSL/TLS) processing
 469 #
 470 # In some environments, certain algorithms or key lengths may be undesirable
 471 # when using SSL/TLS.  This section describes the mechanism for disabling
 472 # algorithms during SSL/TLS security parameters negotiation, including cipher
 473 # suites selection, peer authentication and key exchange mechanisms.
 474 #
 475 # For PKI-based peer authentication and key exchange mechanisms, this list
 476 # of disabled algorithms will also be checked during certification path
 477 # building and validation, including algorithms used in certificates, as
 478 # well as revocation information such as CRLs and signed OCSP Responses.
 479 # This is in addition to the jdk.certpath.disabledAlgorithms property above.
 480 #
 481 # See the specification of "jdk.certpath.disabledAlgorithms" for the
 482 # syntax of the disabled algorithm string.
 483 #
 484 # Note: This property is currently used by Oracle's JSSE implementation.
 485 # It is not guaranteed to be examined and used by other implementations.
 486 #
 487 # Example:
 488 #   jdk.tls.disabledAlgorithms=MD5, SHA1, DSA, RSA keySize < 2048
 489