1 /* 2 * Copyright (c) 1998, 2018, Oracle and/or its affiliates. All rights reserved. 3 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. 4 * 5 * This code is free software; you can redistribute it and/or modify it 6 * under the terms of the GNU General Public License version 2 only, as 7 * published by the Free Software Foundation. 8 * 9 * This code is distributed in the hope that it will be useful, but WITHOUT 10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License 12 * version 2 for more details (a copy is included in the LICENSE file that 13 * accompanied this code). 14 * 15 * You should have received a copy of the GNU General Public License version 16 * 2 along with this work; if not, write to the Free Software Foundation, 17 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. 18 * 19 * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA 20 * or visit www.oracle.com if you need additional information or have any 21 * questions. 22 * 23 */ 24 25 #ifndef SHARE_VM_RUNTIME_OBJECTMONITOR_HPP 26 #define SHARE_VM_RUNTIME_OBJECTMONITOR_HPP 27 28 #include "memory/allocation.hpp" 29 #include "memory/padded.hpp" 30 #include "runtime/os.hpp" 31 #include "runtime/park.hpp" 32 #include "runtime/perfData.hpp" 33 34 // ObjectWaiter serves as a "proxy" or surrogate thread. 35 // TODO-FIXME: Eliminate ObjectWaiter and use the thread-specific 36 // ParkEvent instead. Beware, however, that the JVMTI code 37 // knows about ObjectWaiters, so we'll have to reconcile that code. 38 // See next_waiter(), first_waiter(), etc. 39 40 class ObjectWaiter : public StackObj { 41 public: 42 enum TStates { TS_UNDEF, TS_READY, TS_RUN, TS_WAIT, TS_ENTER, TS_CXQ }; 43 enum Sorted { PREPEND, APPEND, SORTED }; 44 ObjectWaiter * volatile _next; 45 ObjectWaiter * volatile _prev; 46 Thread* _thread; 47 jlong _notifier_tid; 48 ParkEvent * _event; 49 volatile int _notified; 50 volatile TStates TState; 51 Sorted _Sorted; // List placement disposition 52 bool _active; // Contention monitoring is enabled 53 public: 54 ObjectWaiter(Thread* thread); 55 56 void wait_reenter_begin(ObjectMonitor *mon); 57 void wait_reenter_end(ObjectMonitor *mon); 58 }; 59 60 // forward declaration to avoid include tracing.hpp 61 class EventJavaMonitorWait; 62 63 // The ObjectMonitor class implements the heavyweight version of a 64 // JavaMonitor. The lightweight BasicLock/stack lock version has been 65 // inflated into an ObjectMonitor. This inflation is typically due to 66 // contention or use of Object.wait(). 67 // 68 // WARNING: This is a very sensitive and fragile class. DO NOT make any 69 // changes unless you are fully aware of the underlying semantics. 70 // 71 // Class JvmtiRawMonitor currently inherits from ObjectMonitor so 72 // changes in this class must be careful to not break JvmtiRawMonitor. 73 // These two subsystems should be separated. 74 // 75 // ObjectMonitor Layout Overview/Highlights/Restrictions: 76 // 77 // - The _header field must be at offset 0 because the displaced header 78 // from markOop is stored there. We do not want markOop.hpp to include 79 // ObjectMonitor.hpp to avoid exposing ObjectMonitor everywhere. This 80 // means that ObjectMonitor cannot inherit from any other class nor can 81 // it use any virtual member functions. This restriction is critical to 82 // the proper functioning of the VM. 83 // - The _header and _owner fields should be separated by enough space 84 // to avoid false sharing due to parallel access by different threads. 85 // This is an advisory recommendation. 86 // - The general layout of the fields in ObjectMonitor is: 87 // _header 88 // <lightly_used_fields> 89 // <optional padding> 90 // _owner 91 // <remaining_fields> 92 // - The VM assumes write ordering and machine word alignment with 93 // respect to the _owner field and the <remaining_fields> that can 94 // be read in parallel by other threads. 95 // - Generally fields that are accessed closely together in time should 96 // be placed proximally in space to promote data cache locality. That 97 // is, temporal locality should condition spatial locality. 98 // - We have to balance avoiding false sharing with excessive invalidation 99 // from coherence traffic. As such, we try to cluster fields that tend 100 // to be _written_ at approximately the same time onto the same data 101 // cache line. 102 // - We also have to balance the natural tension between minimizing 103 // single threaded capacity misses with excessive multi-threaded 104 // coherency misses. There is no single optimal layout for both 105 // single-threaded and multi-threaded environments. 106 // 107 // - See ObjectMonitor::sanity_checks() for how critical restrictions are 108 // enforced and advisory recommendations are reported. 109 // - Adjacent ObjectMonitors should be separated by enough space to avoid 110 // false sharing. This is handled by the ObjectMonitor allocation code 111 // in synchronizer.cpp. Also see ObjectSynchronizer::sanity_checks(). 112 // 113 // Futures notes: 114 // - Separating _owner from the <remaining_fields> by enough space to 115 // avoid false sharing might be profitable. Given 116 // http://blogs.oracle.com/dave/entry/cas_and_cache_trivia_invalidate 117 // we know that the CAS in monitorenter will invalidate the line 118 // underlying _owner. We want to avoid an L1 data cache miss on that 119 // same line for monitorexit. Putting these <remaining_fields>: 120 // _recursions, _EntryList, _cxq, and _succ, all of which may be 121 // fetched in the inflated unlock path, on a different cache line 122 // would make them immune to CAS-based invalidation from the _owner 123 // field. 124 // 125 // - The _recursions field should be of type int, or int32_t but not 126 // intptr_t. There's no reason to use a 64-bit type for this field 127 // in a 64-bit JVM. 128 129 class ObjectMonitor { 130 public: 131 enum { 132 OM_OK, // no error 133 OM_SYSTEM_ERROR, // operating system error 134 OM_ILLEGAL_MONITOR_STATE, // IllegalMonitorStateException 135 OM_INTERRUPTED, // Thread.interrupt() 136 OM_TIMED_OUT // Object.wait() timed out 137 }; 138 139 private: 140 friend class ObjectSynchronizer; 141 friend class ObjectWaiter; 142 friend class VMStructs; 143 144 volatile markOop _header; // displaced object header word - mark 145 void* volatile _object; // backward object pointer - strong root 146 public: 147 ObjectMonitor* FreeNext; // Free list linkage 148 private: 149 DEFINE_PAD_MINUS_SIZE(0, DEFAULT_CACHE_LINE_SIZE, 150 sizeof(volatile markOop) + sizeof(void * volatile) + 151 sizeof(ObjectMonitor *)); 152 protected: // protected for JvmtiRawMonitor 153 void * volatile _owner; // pointer to owning thread OR BasicLock 154 volatile jlong _previous_owner_tid; // thread id of the previous owner of the monitor 155 volatile intptr_t _recursions; // recursion count, 0 for first entry 156 ObjectWaiter * volatile _EntryList; // Threads blocked on entry or reentry. 157 // The list is actually composed of WaitNodes, 158 // acting as proxies for Threads. 159 private: 160 ObjectWaiter * volatile _cxq; // LL of recently-arrived threads blocked on entry. 161 Thread * volatile _succ; // Heir presumptive thread - used for futile wakeup throttling 162 Thread * volatile _Responsible; 163 164 volatile int _Spinner; // for exit->spinner handoff optimization 165 volatile int _SpinDuration; 166 167 volatile jint _count; // reference count to prevent reclamation/deflation 168 // at stop-the-world time. See deflate_idle_monitors(). 169 // _count is approximately |_WaitSet| + |_EntryList| 170 protected: 171 ObjectWaiter * volatile _WaitSet; // LL of threads wait()ing on the monitor 172 volatile jint _waiters; // number of waiting threads 173 private: 174 volatile int _WaitSetLock; // protects Wait Queue - simple spinlock 175 176 public: 177 static void Initialize(); 178 179 // Only perform a PerfData operation if the PerfData object has been 180 // allocated and if the PerfDataManager has not freed the PerfData 181 // objects which can happen at normal VM shutdown. 182 // 183 #define OM_PERFDATA_OP(f, op_str) \ 184 do { \ 185 if (ObjectMonitor::_sync_ ## f != NULL && \ 186 PerfDataManager::has_PerfData()) { \ 187 ObjectMonitor::_sync_ ## f->op_str; \ 188 } \ 189 } while (0) 190 191 static PerfCounter * _sync_ContendedLockAttempts; 192 static PerfCounter * _sync_FutileWakeups; 193 static PerfCounter * _sync_Parks; 194 static PerfCounter * _sync_Notifications; 195 static PerfCounter * _sync_Inflations; 196 static PerfCounter * _sync_Deflations; 197 static PerfLongVariable * _sync_MonExtant; 198 199 static int Knob_ExitRelease; 200 static int Knob_Verbose; 201 static int Knob_VerifyInUse; 202 static int Knob_VerifyMatch; 203 static int Knob_SpinLimit; 204 205 void* operator new (size_t size) throw(); 206 void* operator new[] (size_t size) throw(); 207 void operator delete(void* p); 208 void operator delete[] (void *p); 209 210 // TODO-FIXME: the "offset" routines should return a type of off_t instead of int ... 211 // ByteSize would also be an appropriate type. 212 static int header_offset_in_bytes() { return offset_of(ObjectMonitor, _header); } 213 static int object_offset_in_bytes() { return offset_of(ObjectMonitor, _object); } 214 static int owner_offset_in_bytes() { return offset_of(ObjectMonitor, _owner); } 215 static int count_offset_in_bytes() { return offset_of(ObjectMonitor, _count); } 216 static int recursions_offset_in_bytes() { return offset_of(ObjectMonitor, _recursions); } 217 static int cxq_offset_in_bytes() { return offset_of(ObjectMonitor, _cxq); } 218 static int succ_offset_in_bytes() { return offset_of(ObjectMonitor, _succ); } 219 static int EntryList_offset_in_bytes() { return offset_of(ObjectMonitor, _EntryList); } 220 221 // ObjectMonitor references can be ORed with markOopDesc::monitor_value 222 // as part of the ObjectMonitor tagging mechanism. When we combine an 223 // ObjectMonitor reference with an offset, we need to remove the tag 224 // value in order to generate the proper address. 225 // 226 // We can either adjust the ObjectMonitor reference and then add the 227 // offset or we can adjust the offset that is added to the ObjectMonitor 228 // reference. The latter avoids an AGI (Address Generation Interlock) 229 // stall so the helper macro adjusts the offset value that is returned 230 // to the ObjectMonitor reference manipulation code: 231 // 232 #define OM_OFFSET_NO_MONITOR_VALUE_TAG(f) \ 233 ((ObjectMonitor::f ## _offset_in_bytes()) - markOopDesc::monitor_value) 234 235 markOop header() const; 236 volatile markOop* header_addr(); 237 void set_header(markOop hdr); 238 239 intptr_t is_busy() const { 240 // TODO-FIXME: merge _count and _waiters. 241 // TODO-FIXME: assert _owner == null implies _recursions = 0 242 // TODO-FIXME: assert _WaitSet != null implies _count > 0 243 return _count|_waiters|intptr_t(_owner)|intptr_t(_cxq)|intptr_t(_EntryList); 244 } 245 246 intptr_t is_entered(Thread* current) const; 247 248 void* owner() const; 249 void set_owner(void* owner); 250 251 jint waiters() const; 252 253 jint count() const; 254 void set_count(jint count); 255 jint contentions() const; 256 intptr_t recursions() const { return _recursions; } 257 258 // JVM/TI GetObjectMonitorUsage() needs this: 259 ObjectWaiter* first_waiter() { return _WaitSet; } 260 ObjectWaiter* next_waiter(ObjectWaiter* o) { return o->_next; } 261 Thread* thread_of_waiter(ObjectWaiter* o) { return o->_thread; } 262 263 protected: 264 // We don't typically expect or want the ctors or dtors to run. 265 // normal ObjectMonitors are type-stable and immortal. 266 ObjectMonitor() { ::memset((void *)this, 0, sizeof(*this)); } 267 268 ~ObjectMonitor() { 269 // TODO: Add asserts ... 270 // _cxq == 0 _succ == NULL _owner == NULL _waiters == 0 271 // _count == 0 _EntryList == NULL etc 272 } 273 274 private: 275 void Recycle() { 276 // TODO: add stronger asserts ... 277 // _cxq == 0 _succ == NULL _owner == NULL _waiters == 0 278 // _count == 0 EntryList == NULL 279 // _recursions == 0 _WaitSet == NULL 280 assert(((is_busy()|_recursions) == 0), "freeing inuse monitor"); 281 _succ = NULL; 282 _EntryList = NULL; 283 _cxq = NULL; 284 _WaitSet = NULL; 285 _recursions = 0; 286 } 287 288 public: 289 290 void* object() const; 291 void* object_addr(); 292 void set_object(void* obj); 293 294 bool check(TRAPS); // true if the thread owns the monitor. 295 void check_slow(TRAPS); 296 void clear(); 297 static void sanity_checks(); // public for -XX:+ExecuteInternalVMTests 298 // in PRODUCT for -XX:SyncKnobs=Verbose=1 299 300 void enter(TRAPS); 301 void exit(bool not_suspended, TRAPS); 302 void wait(jlong millis, bool interruptable, TRAPS); 303 void notify(TRAPS); 304 void notifyAll(TRAPS); 305 306 // Use the following at your own risk 307 intptr_t complete_exit(TRAPS); 308 void reenter(intptr_t recursions, TRAPS); 309 310 private: 311 void AddWaiter(ObjectWaiter * waiter); 312 static void DeferredInitialize(); 313 void INotify(Thread * Self); 314 ObjectWaiter * DequeueWaiter(); 315 void DequeueSpecificWaiter(ObjectWaiter * waiter); 316 void EnterI(TRAPS); 317 void ReenterI(Thread * Self, ObjectWaiter * SelfNode); 318 void UnlinkAfterAcquire(Thread * Self, ObjectWaiter * SelfNode); 319 int TryLock(Thread * Self); 320 int NotRunnable(Thread * Self, Thread * Owner); 321 int TrySpin(Thread * Self); 322 void ExitEpilog(Thread * Self, ObjectWaiter * Wakee); 323 bool ExitSuspendEquivalent(JavaThread * Self); 324 void post_monitor_wait_event(EventJavaMonitorWait * event, 325 jlong notifier_tid, 326 jlong timeout, 327 bool timedout); 328 329 }; 330 331 #undef TEVENT 332 #define TEVENT(nom) { if (SyncVerbose) FEVENT(nom); } 333 334 #define FEVENT(nom) \ 335 { \ 336 static volatile int ctr = 0; \ 337 int v = ++ctr; \ 338 if ((v & (v - 1)) == 0) { \ 339 tty->print_cr("INFO: " #nom " : %d", v); \ 340 tty->flush(); \ 341 } \ 342 } 343 344 #undef TEVENT 345 #define TEVENT(nom) {;} 346 347 348 #endif // SHARE_VM_RUNTIME_OBJECTMONITOR_HPP