1 /* 2 * Copyright (c) 1997, 2018, Oracle and/or its affiliates. All rights reserved. 3 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. 4 * 5 * This code is free software; you can redistribute it and/or modify it 6 * under the terms of the GNU General Public License version 2 only, as 7 * published by the Free Software Foundation. 8 * 9 * This code is distributed in the hope that it will be useful, but WITHOUT 10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License 12 * version 2 for more details (a copy is included in the LICENSE file that 13 * accompanied this code). 14 * 15 * You should have received a copy of the GNU General Public License version 16 * 2 along with this work; if not, write to the Free Software Foundation, 17 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. 18 * 19 * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA 20 * or visit www.oracle.com if you need additional information or have any 21 * questions. 22 * 23 */ 24 25 #include "precompiled.hpp" 26 #include "interp_masm_x86.hpp" 27 #include "interpreter/interpreter.hpp" 28 #include "interpreter/interpreterRuntime.hpp" 29 #include "logging/log.hpp" 30 #include "oops/arrayOop.hpp" 31 #include "oops/markOop.hpp" 32 #include "oops/methodData.hpp" 33 #include "oops/method.hpp" 34 #include "prims/jvmtiExport.hpp" 35 #include "prims/jvmtiThreadState.hpp" 36 #include "runtime/basicLock.hpp" 37 #include "runtime/biasedLocking.hpp" 38 #include "runtime/frame.inline.hpp" 39 #include "runtime/safepointMechanism.hpp" 40 #include "runtime/sharedRuntime.hpp" 41 #include "runtime/thread.inline.hpp" 42 43 // Implementation of InterpreterMacroAssembler 44 45 void InterpreterMacroAssembler::jump_to_entry(address entry) { 46 assert(entry, "Entry must have been generated by now"); 47 jump(RuntimeAddress(entry)); 48 } 49 50 void InterpreterMacroAssembler::profile_obj_type(Register obj, const Address& mdo_addr) { 51 Label update, next, none; 52 53 verify_oop(obj); 54 55 testptr(obj, obj); 56 jccb(Assembler::notZero, update); 57 orptr(mdo_addr, TypeEntries::null_seen); 58 jmpb(next); 59 60 bind(update); 61 load_klass(obj, obj); 62 63 xorptr(obj, mdo_addr); 64 testptr(obj, TypeEntries::type_klass_mask); 65 jccb(Assembler::zero, next); // klass seen before, nothing to 66 // do. The unknown bit may have been 67 // set already but no need to check. 68 69 testptr(obj, TypeEntries::type_unknown); 70 jccb(Assembler::notZero, next); // already unknown. Nothing to do anymore. 71 72 cmpptr(mdo_addr, 0); 73 jccb(Assembler::equal, none); 74 cmpptr(mdo_addr, TypeEntries::null_seen); 75 jccb(Assembler::equal, none); 76 // There is a chance that the checks above (re-reading profiling 77 // data from memory) fail if another thread has just set the 78 // profiling to this obj's klass 79 xorptr(obj, mdo_addr); 80 testptr(obj, TypeEntries::type_klass_mask); 81 jccb(Assembler::zero, next); 82 83 // different than before. Cannot keep accurate profile. 84 orptr(mdo_addr, TypeEntries::type_unknown); 85 jmpb(next); 86 87 bind(none); 88 // first time here. Set profile type. 89 movptr(mdo_addr, obj); 90 91 bind(next); 92 } 93 94 void InterpreterMacroAssembler::profile_arguments_type(Register mdp, Register callee, Register tmp, bool is_virtual) { 95 if (!ProfileInterpreter) { 96 return; 97 } 98 99 if (MethodData::profile_arguments() || MethodData::profile_return()) { 100 Label profile_continue; 101 102 test_method_data_pointer(mdp, profile_continue); 103 104 int off_to_start = is_virtual ? in_bytes(VirtualCallData::virtual_call_data_size()) : in_bytes(CounterData::counter_data_size()); 105 106 cmpb(Address(mdp, in_bytes(DataLayout::tag_offset()) - off_to_start), is_virtual ? DataLayout::virtual_call_type_data_tag : DataLayout::call_type_data_tag); 107 jcc(Assembler::notEqual, profile_continue); 108 109 if (MethodData::profile_arguments()) { 110 Label done; 111 int off_to_args = in_bytes(TypeEntriesAtCall::args_data_offset()); 112 addptr(mdp, off_to_args); 113 114 for (int i = 0; i < TypeProfileArgsLimit; i++) { 115 if (i > 0 || MethodData::profile_return()) { 116 // If return value type is profiled we may have no argument to profile 117 movptr(tmp, Address(mdp, in_bytes(TypeEntriesAtCall::cell_count_offset())-off_to_args)); 118 subl(tmp, i*TypeStackSlotEntries::per_arg_count()); 119 cmpl(tmp, TypeStackSlotEntries::per_arg_count()); 120 jcc(Assembler::less, done); 121 } 122 movptr(tmp, Address(callee, Method::const_offset())); 123 load_unsigned_short(tmp, Address(tmp, ConstMethod::size_of_parameters_offset())); 124 // stack offset o (zero based) from the start of the argument 125 // list, for n arguments translates into offset n - o - 1 from 126 // the end of the argument list 127 subptr(tmp, Address(mdp, in_bytes(TypeEntriesAtCall::stack_slot_offset(i))-off_to_args)); 128 subl(tmp, 1); 129 Address arg_addr = argument_address(tmp); 130 movptr(tmp, arg_addr); 131 132 Address mdo_arg_addr(mdp, in_bytes(TypeEntriesAtCall::argument_type_offset(i))-off_to_args); 133 profile_obj_type(tmp, mdo_arg_addr); 134 135 int to_add = in_bytes(TypeStackSlotEntries::per_arg_size()); 136 addptr(mdp, to_add); 137 off_to_args += to_add; 138 } 139 140 if (MethodData::profile_return()) { 141 movptr(tmp, Address(mdp, in_bytes(TypeEntriesAtCall::cell_count_offset())-off_to_args)); 142 subl(tmp, TypeProfileArgsLimit*TypeStackSlotEntries::per_arg_count()); 143 } 144 145 bind(done); 146 147 if (MethodData::profile_return()) { 148 // We're right after the type profile for the last 149 // argument. tmp is the number of cells left in the 150 // CallTypeData/VirtualCallTypeData to reach its end. Non null 151 // if there's a return to profile. 152 assert(ReturnTypeEntry::static_cell_count() < TypeStackSlotEntries::per_arg_count(), "can't move past ret type"); 153 shll(tmp, exact_log2(DataLayout::cell_size)); 154 addptr(mdp, tmp); 155 } 156 movptr(Address(rbp, frame::interpreter_frame_mdp_offset * wordSize), mdp); 157 } else { 158 assert(MethodData::profile_return(), "either profile call args or call ret"); 159 update_mdp_by_constant(mdp, in_bytes(TypeEntriesAtCall::return_only_size())); 160 } 161 162 // mdp points right after the end of the 163 // CallTypeData/VirtualCallTypeData, right after the cells for the 164 // return value type if there's one 165 166 bind(profile_continue); 167 } 168 } 169 170 void InterpreterMacroAssembler::profile_return_type(Register mdp, Register ret, Register tmp) { 171 assert_different_registers(mdp, ret, tmp, _bcp_register); 172 if (ProfileInterpreter && MethodData::profile_return()) { 173 Label profile_continue, done; 174 175 test_method_data_pointer(mdp, profile_continue); 176 177 if (MethodData::profile_return_jsr292_only()) { 178 assert(Method::intrinsic_id_size_in_bytes() == 2, "assuming Method::_intrinsic_id is u2"); 179 180 // If we don't profile all invoke bytecodes we must make sure 181 // it's a bytecode we indeed profile. We can't go back to the 182 // begining of the ProfileData we intend to update to check its 183 // type because we're right after it and we don't known its 184 // length 185 Label do_profile; 186 cmpb(Address(_bcp_register, 0), Bytecodes::_invokedynamic); 187 jcc(Assembler::equal, do_profile); 188 cmpb(Address(_bcp_register, 0), Bytecodes::_invokehandle); 189 jcc(Assembler::equal, do_profile); 190 get_method(tmp); 191 cmpw(Address(tmp, Method::intrinsic_id_offset_in_bytes()), vmIntrinsics::_compiledLambdaForm); 192 jcc(Assembler::notEqual, profile_continue); 193 194 bind(do_profile); 195 } 196 197 Address mdo_ret_addr(mdp, -in_bytes(ReturnTypeEntry::size())); 198 mov(tmp, ret); 199 profile_obj_type(tmp, mdo_ret_addr); 200 201 bind(profile_continue); 202 } 203 } 204 205 void InterpreterMacroAssembler::profile_parameters_type(Register mdp, Register tmp1, Register tmp2) { 206 if (ProfileInterpreter && MethodData::profile_parameters()) { 207 Label profile_continue, done; 208 209 test_method_data_pointer(mdp, profile_continue); 210 211 // Load the offset of the area within the MDO used for 212 // parameters. If it's negative we're not profiling any parameters 213 movl(tmp1, Address(mdp, in_bytes(MethodData::parameters_type_data_di_offset()) - in_bytes(MethodData::data_offset()))); 214 testl(tmp1, tmp1); 215 jcc(Assembler::negative, profile_continue); 216 217 // Compute a pointer to the area for parameters from the offset 218 // and move the pointer to the slot for the last 219 // parameters. Collect profiling from last parameter down. 220 // mdo start + parameters offset + array length - 1 221 addptr(mdp, tmp1); 222 movptr(tmp1, Address(mdp, ArrayData::array_len_offset())); 223 decrement(tmp1, TypeStackSlotEntries::per_arg_count()); 224 225 Label loop; 226 bind(loop); 227 228 int off_base = in_bytes(ParametersTypeData::stack_slot_offset(0)); 229 int type_base = in_bytes(ParametersTypeData::type_offset(0)); 230 Address::ScaleFactor per_arg_scale = Address::times(DataLayout::cell_size); 231 Address arg_off(mdp, tmp1, per_arg_scale, off_base); 232 Address arg_type(mdp, tmp1, per_arg_scale, type_base); 233 234 // load offset on the stack from the slot for this parameter 235 movptr(tmp2, arg_off); 236 negptr(tmp2); 237 // read the parameter from the local area 238 movptr(tmp2, Address(_locals_register, tmp2, Interpreter::stackElementScale())); 239 240 // profile the parameter 241 profile_obj_type(tmp2, arg_type); 242 243 // go to next parameter 244 decrement(tmp1, TypeStackSlotEntries::per_arg_count()); 245 jcc(Assembler::positive, loop); 246 247 bind(profile_continue); 248 } 249 } 250 251 void InterpreterMacroAssembler::call_VM_leaf_base(address entry_point, 252 int number_of_arguments) { 253 // interpreter specific 254 // 255 // Note: No need to save/restore bcp & locals registers 256 // since these are callee saved registers and no blocking/ 257 // GC can happen in leaf calls. 258 // Further Note: DO NOT save/restore bcp/locals. If a caller has 259 // already saved them so that it can use rsi/rdi as temporaries 260 // then a save/restore here will DESTROY the copy the caller 261 // saved! There used to be a save_bcp() that only happened in 262 // the ASSERT path (no restore_bcp). Which caused bizarre failures 263 // when jvm built with ASSERTs. 264 #ifdef ASSERT 265 { 266 Label L; 267 cmpptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), (int32_t)NULL_WORD); 268 jcc(Assembler::equal, L); 269 stop("InterpreterMacroAssembler::call_VM_leaf_base:" 270 " last_sp != NULL"); 271 bind(L); 272 } 273 #endif 274 // super call 275 MacroAssembler::call_VM_leaf_base(entry_point, number_of_arguments); 276 // interpreter specific 277 // LP64: Used to ASSERT that r13/r14 were equal to frame's bcp/locals 278 // but since they may not have been saved (and we don't want to 279 // save them here (see note above) the assert is invalid. 280 } 281 282 void InterpreterMacroAssembler::call_VM_base(Register oop_result, 283 Register java_thread, 284 Register last_java_sp, 285 address entry_point, 286 int number_of_arguments, 287 bool check_exceptions) { 288 // interpreter specific 289 // 290 // Note: Could avoid restoring locals ptr (callee saved) - however doesn't 291 // really make a difference for these runtime calls, since they are 292 // slow anyway. Btw., bcp must be saved/restored since it may change 293 // due to GC. 294 NOT_LP64(assert(java_thread == noreg , "not expecting a precomputed java thread");) 295 save_bcp(); 296 #ifdef ASSERT 297 { 298 Label L; 299 cmpptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), (int32_t)NULL_WORD); 300 jcc(Assembler::equal, L); 301 stop("InterpreterMacroAssembler::call_VM_base:" 302 " last_sp != NULL"); 303 bind(L); 304 } 305 #endif /* ASSERT */ 306 // super call 307 MacroAssembler::call_VM_base(oop_result, noreg, last_java_sp, 308 entry_point, number_of_arguments, 309 check_exceptions); 310 // interpreter specific 311 restore_bcp(); 312 restore_locals(); 313 } 314 315 void InterpreterMacroAssembler::check_and_handle_popframe(Register java_thread) { 316 if (JvmtiExport::can_pop_frame()) { 317 Label L; 318 // Initiate popframe handling only if it is not already being 319 // processed. If the flag has the popframe_processing bit set, it 320 // means that this code is called *during* popframe handling - we 321 // don't want to reenter. 322 // This method is only called just after the call into the vm in 323 // call_VM_base, so the arg registers are available. 324 Register pop_cond = NOT_LP64(java_thread) // Not clear if any other register is available on 32 bit 325 LP64_ONLY(c_rarg0); 326 movl(pop_cond, Address(java_thread, JavaThread::popframe_condition_offset())); 327 testl(pop_cond, JavaThread::popframe_pending_bit); 328 jcc(Assembler::zero, L); 329 testl(pop_cond, JavaThread::popframe_processing_bit); 330 jcc(Assembler::notZero, L); 331 // Call Interpreter::remove_activation_preserving_args_entry() to get the 332 // address of the same-named entrypoint in the generated interpreter code. 333 call_VM_leaf(CAST_FROM_FN_PTR(address, Interpreter::remove_activation_preserving_args_entry)); 334 jmp(rax); 335 bind(L); 336 NOT_LP64(get_thread(java_thread);) 337 } 338 } 339 340 void InterpreterMacroAssembler::load_earlyret_value(TosState state) { 341 Register thread = LP64_ONLY(r15_thread) NOT_LP64(rcx); 342 NOT_LP64(get_thread(thread);) 343 movptr(rcx, Address(thread, JavaThread::jvmti_thread_state_offset())); 344 const Address tos_addr(rcx, JvmtiThreadState::earlyret_tos_offset()); 345 const Address oop_addr(rcx, JvmtiThreadState::earlyret_oop_offset()); 346 const Address val_addr(rcx, JvmtiThreadState::earlyret_value_offset()); 347 #ifdef _LP64 348 switch (state) { 349 case atos: movptr(rax, oop_addr); 350 movptr(oop_addr, (int32_t)NULL_WORD); 351 verify_oop(rax, state); break; 352 case ltos: movptr(rax, val_addr); break; 353 case btos: // fall through 354 case ztos: // fall through 355 case ctos: // fall through 356 case stos: // fall through 357 case itos: movl(rax, val_addr); break; 358 case ftos: load_float(val_addr); break; 359 case dtos: load_double(val_addr); break; 360 case vtos: /* nothing to do */ break; 361 default : ShouldNotReachHere(); 362 } 363 // Clean up tos value in the thread object 364 movl(tos_addr, (int) ilgl); 365 movl(val_addr, (int32_t) NULL_WORD); 366 #else 367 const Address val_addr1(rcx, JvmtiThreadState::earlyret_value_offset() 368 + in_ByteSize(wordSize)); 369 switch (state) { 370 case atos: movptr(rax, oop_addr); 371 movptr(oop_addr, NULL_WORD); 372 verify_oop(rax, state); break; 373 case ltos: 374 movl(rdx, val_addr1); // fall through 375 case btos: // fall through 376 case ztos: // fall through 377 case ctos: // fall through 378 case stos: // fall through 379 case itos: movl(rax, val_addr); break; 380 case ftos: load_float(val_addr); break; 381 case dtos: load_double(val_addr); break; 382 case vtos: /* nothing to do */ break; 383 default : ShouldNotReachHere(); 384 } 385 #endif // _LP64 386 // Clean up tos value in the thread object 387 movl(tos_addr, (int32_t) ilgl); 388 movptr(val_addr, NULL_WORD); 389 NOT_LP64(movptr(val_addr1, NULL_WORD);) 390 } 391 392 393 void InterpreterMacroAssembler::check_and_handle_earlyret(Register java_thread) { 394 if (JvmtiExport::can_force_early_return()) { 395 Label L; 396 Register tmp = LP64_ONLY(c_rarg0) NOT_LP64(java_thread); 397 Register rthread = LP64_ONLY(r15_thread) NOT_LP64(java_thread); 398 399 movptr(tmp, Address(rthread, JavaThread::jvmti_thread_state_offset())); 400 testptr(tmp, tmp); 401 jcc(Assembler::zero, L); // if (thread->jvmti_thread_state() == NULL) exit; 402 403 // Initiate earlyret handling only if it is not already being processed. 404 // If the flag has the earlyret_processing bit set, it means that this code 405 // is called *during* earlyret handling - we don't want to reenter. 406 movl(tmp, Address(tmp, JvmtiThreadState::earlyret_state_offset())); 407 cmpl(tmp, JvmtiThreadState::earlyret_pending); 408 jcc(Assembler::notEqual, L); 409 410 // Call Interpreter::remove_activation_early_entry() to get the address of the 411 // same-named entrypoint in the generated interpreter code. 412 NOT_LP64(get_thread(java_thread);) 413 movptr(tmp, Address(rthread, JavaThread::jvmti_thread_state_offset())); 414 #ifdef _LP64 415 movl(tmp, Address(tmp, JvmtiThreadState::earlyret_tos_offset())); 416 call_VM_leaf(CAST_FROM_FN_PTR(address, Interpreter::remove_activation_early_entry), tmp); 417 #else 418 pushl(Address(tmp, JvmtiThreadState::earlyret_tos_offset())); 419 call_VM_leaf(CAST_FROM_FN_PTR(address, Interpreter::remove_activation_early_entry), 1); 420 #endif // _LP64 421 jmp(rax); 422 bind(L); 423 NOT_LP64(get_thread(java_thread);) 424 } 425 } 426 427 void InterpreterMacroAssembler::get_unsigned_2_byte_index_at_bcp(Register reg, int bcp_offset) { 428 assert(bcp_offset >= 0, "bcp is still pointing to start of bytecode"); 429 load_unsigned_short(reg, Address(_bcp_register, bcp_offset)); 430 bswapl(reg); 431 shrl(reg, 16); 432 } 433 434 void InterpreterMacroAssembler::get_cache_index_at_bcp(Register index, 435 int bcp_offset, 436 size_t index_size) { 437 assert(bcp_offset > 0, "bcp is still pointing to start of bytecode"); 438 if (index_size == sizeof(u2)) { 439 load_unsigned_short(index, Address(_bcp_register, bcp_offset)); 440 } else if (index_size == sizeof(u4)) { 441 movl(index, Address(_bcp_register, bcp_offset)); 442 // Check if the secondary index definition is still ~x, otherwise 443 // we have to change the following assembler code to calculate the 444 // plain index. 445 assert(ConstantPool::decode_invokedynamic_index(~123) == 123, "else change next line"); 446 notl(index); // convert to plain index 447 } else if (index_size == sizeof(u1)) { 448 load_unsigned_byte(index, Address(_bcp_register, bcp_offset)); 449 } else { 450 ShouldNotReachHere(); 451 } 452 } 453 454 void InterpreterMacroAssembler::get_cache_and_index_at_bcp(Register cache, 455 Register index, 456 int bcp_offset, 457 size_t index_size) { 458 assert_different_registers(cache, index); 459 get_cache_index_at_bcp(index, bcp_offset, index_size); 460 movptr(cache, Address(rbp, frame::interpreter_frame_cache_offset * wordSize)); 461 assert(sizeof(ConstantPoolCacheEntry) == 4 * wordSize, "adjust code below"); 462 // convert from field index to ConstantPoolCacheEntry index 463 assert(exact_log2(in_words(ConstantPoolCacheEntry::size())) == 2, "else change next line"); 464 shll(index, 2); 465 } 466 467 void InterpreterMacroAssembler::get_cache_and_index_and_bytecode_at_bcp(Register cache, 468 Register index, 469 Register bytecode, 470 int byte_no, 471 int bcp_offset, 472 size_t index_size) { 473 get_cache_and_index_at_bcp(cache, index, bcp_offset, index_size); 474 // We use a 32-bit load here since the layout of 64-bit words on 475 // little-endian machines allow us that. 476 movl(bytecode, Address(cache, index, Address::times_ptr, ConstantPoolCache::base_offset() + ConstantPoolCacheEntry::indices_offset())); 477 const int shift_count = (1 + byte_no) * BitsPerByte; 478 assert((byte_no == TemplateTable::f1_byte && shift_count == ConstantPoolCacheEntry::bytecode_1_shift) || 479 (byte_no == TemplateTable::f2_byte && shift_count == ConstantPoolCacheEntry::bytecode_2_shift), 480 "correct shift count"); 481 shrl(bytecode, shift_count); 482 assert(ConstantPoolCacheEntry::bytecode_1_mask == ConstantPoolCacheEntry::bytecode_2_mask, "common mask"); 483 andl(bytecode, ConstantPoolCacheEntry::bytecode_1_mask); 484 } 485 486 void InterpreterMacroAssembler::get_cache_entry_pointer_at_bcp(Register cache, 487 Register tmp, 488 int bcp_offset, 489 size_t index_size) { 490 assert(cache != tmp, "must use different register"); 491 get_cache_index_at_bcp(tmp, bcp_offset, index_size); 492 assert(sizeof(ConstantPoolCacheEntry) == 4 * wordSize, "adjust code below"); 493 // convert from field index to ConstantPoolCacheEntry index 494 // and from word offset to byte offset 495 assert(exact_log2(in_bytes(ConstantPoolCacheEntry::size_in_bytes())) == 2 + LogBytesPerWord, "else change next line"); 496 shll(tmp, 2 + LogBytesPerWord); 497 movptr(cache, Address(rbp, frame::interpreter_frame_cache_offset * wordSize)); 498 // skip past the header 499 addptr(cache, in_bytes(ConstantPoolCache::base_offset())); 500 addptr(cache, tmp); // construct pointer to cache entry 501 } 502 503 // Load object from cpool->resolved_references(index) 504 void InterpreterMacroAssembler::load_resolved_reference_at_index( 505 Register result, Register index) { 506 assert_different_registers(result, index); 507 // convert from field index to resolved_references() index and from 508 // word index to byte offset. Since this is a java object, it can be compressed 509 Register tmp = index; // reuse 510 shll(tmp, LogBytesPerHeapOop); 511 512 get_constant_pool(result); 513 // load pointer for resolved_references[] objArray 514 movptr(result, Address(result, ConstantPool::cache_offset_in_bytes())); 515 movptr(result, Address(result, ConstantPoolCache::resolved_references_offset_in_bytes())); 516 resolve_oop_handle(result); 517 // Add in the index 518 addptr(result, tmp); 519 load_heap_oop(result, Address(result, arrayOopDesc::base_offset_in_bytes(T_OBJECT))); 520 // The resulting oop is null if the reference is not yet resolved. 521 // It is Universe::the_null_sentinel() if the reference resolved to NULL via condy. 522 } 523 524 // load cpool->resolved_klass_at(index) 525 void InterpreterMacroAssembler::load_resolved_klass_at_index(Register cpool, 526 Register index, Register klass) { 527 movw(index, Address(cpool, index, Address::times_ptr, sizeof(ConstantPool))); 528 Register resolved_klasses = cpool; 529 movptr(resolved_klasses, Address(cpool, ConstantPool::resolved_klasses_offset_in_bytes())); 530 movptr(klass, Address(resolved_klasses, index, Address::times_ptr, Array<Klass*>::base_offset_in_bytes())); 531 } 532 533 // Generate a subtype check: branch to ok_is_subtype if sub_klass is a 534 // subtype of super_klass. 535 // 536 // Args: 537 // rax: superklass 538 // Rsub_klass: subklass 539 // 540 // Kills: 541 // rcx, rdi 542 void InterpreterMacroAssembler::gen_subtype_check(Register Rsub_klass, 543 Label& ok_is_subtype) { 544 assert(Rsub_klass != rax, "rax holds superklass"); 545 LP64_ONLY(assert(Rsub_klass != r14, "r14 holds locals");) 546 LP64_ONLY(assert(Rsub_klass != r13, "r13 holds bcp");) 547 assert(Rsub_klass != rcx, "rcx holds 2ndary super array length"); 548 assert(Rsub_klass != rdi, "rdi holds 2ndary super array scan ptr"); 549 550 // Profile the not-null value's klass. 551 profile_typecheck(rcx, Rsub_klass, rdi); // blows rcx, reloads rdi 552 553 // Do the check. 554 check_klass_subtype(Rsub_klass, rax, rcx, ok_is_subtype); // blows rcx 555 556 // Profile the failure of the check. 557 profile_typecheck_failed(rcx); // blows rcx 558 } 559 560 561 #ifndef _LP64 562 void InterpreterMacroAssembler::f2ieee() { 563 if (IEEEPrecision) { 564 fstp_s(Address(rsp, 0)); 565 fld_s(Address(rsp, 0)); 566 } 567 } 568 569 570 void InterpreterMacroAssembler::d2ieee() { 571 if (IEEEPrecision) { 572 fstp_d(Address(rsp, 0)); 573 fld_d(Address(rsp, 0)); 574 } 575 } 576 #endif // _LP64 577 578 // Java Expression Stack 579 580 void InterpreterMacroAssembler::pop_ptr(Register r) { 581 pop(r); 582 } 583 584 void InterpreterMacroAssembler::push_ptr(Register r) { 585 push(r); 586 } 587 588 void InterpreterMacroAssembler::push_i(Register r) { 589 push(r); 590 } 591 592 void InterpreterMacroAssembler::push_f(XMMRegister r) { 593 subptr(rsp, wordSize); 594 movflt(Address(rsp, 0), r); 595 } 596 597 void InterpreterMacroAssembler::pop_f(XMMRegister r) { 598 movflt(r, Address(rsp, 0)); 599 addptr(rsp, wordSize); 600 } 601 602 void InterpreterMacroAssembler::push_d(XMMRegister r) { 603 subptr(rsp, 2 * wordSize); 604 movdbl(Address(rsp, 0), r); 605 } 606 607 void InterpreterMacroAssembler::pop_d(XMMRegister r) { 608 movdbl(r, Address(rsp, 0)); 609 addptr(rsp, 2 * Interpreter::stackElementSize); 610 } 611 612 #ifdef _LP64 613 void InterpreterMacroAssembler::pop_i(Register r) { 614 // XXX can't use pop currently, upper half non clean 615 movl(r, Address(rsp, 0)); 616 addptr(rsp, wordSize); 617 } 618 619 void InterpreterMacroAssembler::pop_l(Register r) { 620 movq(r, Address(rsp, 0)); 621 addptr(rsp, 2 * Interpreter::stackElementSize); 622 } 623 624 void InterpreterMacroAssembler::push_l(Register r) { 625 subptr(rsp, 2 * wordSize); 626 movptr(Address(rsp, Interpreter::expr_offset_in_bytes(0)), r ); 627 movptr(Address(rsp, Interpreter::expr_offset_in_bytes(1)), NULL_WORD ); 628 } 629 630 void InterpreterMacroAssembler::pop(TosState state) { 631 switch (state) { 632 case atos: pop_ptr(); break; 633 case btos: 634 case ztos: 635 case ctos: 636 case stos: 637 case itos: pop_i(); break; 638 case ltos: pop_l(); break; 639 case ftos: pop_f(xmm0); break; 640 case dtos: pop_d(xmm0); break; 641 case vtos: /* nothing to do */ break; 642 default: ShouldNotReachHere(); 643 } 644 verify_oop(rax, state); 645 } 646 647 void InterpreterMacroAssembler::push(TosState state) { 648 verify_oop(rax, state); 649 switch (state) { 650 case atos: push_ptr(); break; 651 case btos: 652 case ztos: 653 case ctos: 654 case stos: 655 case itos: push_i(); break; 656 case ltos: push_l(); break; 657 case ftos: push_f(xmm0); break; 658 case dtos: push_d(xmm0); break; 659 case vtos: /* nothing to do */ break; 660 default : ShouldNotReachHere(); 661 } 662 } 663 #else 664 void InterpreterMacroAssembler::pop_i(Register r) { 665 pop(r); 666 } 667 668 void InterpreterMacroAssembler::pop_l(Register lo, Register hi) { 669 pop(lo); 670 pop(hi); 671 } 672 673 void InterpreterMacroAssembler::pop_f() { 674 fld_s(Address(rsp, 0)); 675 addptr(rsp, 1 * wordSize); 676 } 677 678 void InterpreterMacroAssembler::pop_d() { 679 fld_d(Address(rsp, 0)); 680 addptr(rsp, 2 * wordSize); 681 } 682 683 684 void InterpreterMacroAssembler::pop(TosState state) { 685 switch (state) { 686 case atos: pop_ptr(rax); break; 687 case btos: // fall through 688 case ztos: // fall through 689 case ctos: // fall through 690 case stos: // fall through 691 case itos: pop_i(rax); break; 692 case ltos: pop_l(rax, rdx); break; 693 case ftos: 694 if (UseSSE >= 1) { 695 pop_f(xmm0); 696 } else { 697 pop_f(); 698 } 699 break; 700 case dtos: 701 if (UseSSE >= 2) { 702 pop_d(xmm0); 703 } else { 704 pop_d(); 705 } 706 break; 707 case vtos: /* nothing to do */ break; 708 default : ShouldNotReachHere(); 709 } 710 verify_oop(rax, state); 711 } 712 713 714 void InterpreterMacroAssembler::push_l(Register lo, Register hi) { 715 push(hi); 716 push(lo); 717 } 718 719 void InterpreterMacroAssembler::push_f() { 720 // Do not schedule for no AGI! Never write beyond rsp! 721 subptr(rsp, 1 * wordSize); 722 fstp_s(Address(rsp, 0)); 723 } 724 725 void InterpreterMacroAssembler::push_d() { 726 // Do not schedule for no AGI! Never write beyond rsp! 727 subptr(rsp, 2 * wordSize); 728 fstp_d(Address(rsp, 0)); 729 } 730 731 732 void InterpreterMacroAssembler::push(TosState state) { 733 verify_oop(rax, state); 734 switch (state) { 735 case atos: push_ptr(rax); break; 736 case btos: // fall through 737 case ztos: // fall through 738 case ctos: // fall through 739 case stos: // fall through 740 case itos: push_i(rax); break; 741 case ltos: push_l(rax, rdx); break; 742 case ftos: 743 if (UseSSE >= 1) { 744 push_f(xmm0); 745 } else { 746 push_f(); 747 } 748 break; 749 case dtos: 750 if (UseSSE >= 2) { 751 push_d(xmm0); 752 } else { 753 push_d(); 754 } 755 break; 756 case vtos: /* nothing to do */ break; 757 default : ShouldNotReachHere(); 758 } 759 } 760 #endif // _LP64 761 762 763 // Helpers for swap and dup 764 void InterpreterMacroAssembler::load_ptr(int n, Register val) { 765 movptr(val, Address(rsp, Interpreter::expr_offset_in_bytes(n))); 766 } 767 768 void InterpreterMacroAssembler::store_ptr(int n, Register val) { 769 movptr(Address(rsp, Interpreter::expr_offset_in_bytes(n)), val); 770 } 771 772 773 void InterpreterMacroAssembler::prepare_to_jump_from_interpreted() { 774 // set sender sp 775 lea(_bcp_register, Address(rsp, wordSize)); 776 // record last_sp 777 movptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), _bcp_register); 778 } 779 780 781 // Jump to from_interpreted entry of a call unless single stepping is possible 782 // in this thread in which case we must call the i2i entry 783 void InterpreterMacroAssembler::jump_from_interpreted(Register method, Register temp) { 784 prepare_to_jump_from_interpreted(); 785 786 if (JvmtiExport::can_post_interpreter_events()) { 787 Label run_compiled_code; 788 // JVMTI events, such as single-stepping, are implemented partly by avoiding running 789 // compiled code in threads for which the event is enabled. Check here for 790 // interp_only_mode if these events CAN be enabled. 791 // interp_only is an int, on little endian it is sufficient to test the byte only 792 // Is a cmpl faster? 793 LP64_ONLY(temp = r15_thread;) 794 NOT_LP64(get_thread(temp);) 795 cmpb(Address(temp, JavaThread::interp_only_mode_offset()), 0); 796 jccb(Assembler::zero, run_compiled_code); 797 jmp(Address(method, Method::interpreter_entry_offset())); 798 bind(run_compiled_code); 799 } 800 801 jmp(Address(method, Method::from_interpreted_offset())); 802 } 803 804 // The following two routines provide a hook so that an implementation 805 // can schedule the dispatch in two parts. x86 does not do this. 806 void InterpreterMacroAssembler::dispatch_prolog(TosState state, int step) { 807 // Nothing x86 specific to be done here 808 } 809 810 void InterpreterMacroAssembler::dispatch_epilog(TosState state, int step) { 811 dispatch_next(state, step); 812 } 813 814 void InterpreterMacroAssembler::dispatch_base(TosState state, 815 address* table, 816 bool verifyoop, 817 bool generate_poll) { 818 verify_FPU(1, state); 819 if (VerifyActivationFrameSize) { 820 Label L; 821 mov(rcx, rbp); 822 subptr(rcx, rsp); 823 int32_t min_frame_size = 824 (frame::link_offset - frame::interpreter_frame_initial_sp_offset) * 825 wordSize; 826 cmpptr(rcx, (int32_t)min_frame_size); 827 jcc(Assembler::greaterEqual, L); 828 stop("broken stack frame"); 829 bind(L); 830 } 831 if (verifyoop) { 832 verify_oop(rax, state); 833 } 834 835 address* const safepoint_table = Interpreter::safept_table(state); 836 #ifdef _LP64 837 Label no_safepoint, dispatch; 838 if (SafepointMechanism::uses_thread_local_poll() && table != safepoint_table && generate_poll) { 839 NOT_PRODUCT(block_comment("Thread-local Safepoint poll")); 840 testb(Address(r15_thread, Thread::polling_page_offset()), SafepointMechanism::poll_bit()); 841 842 jccb(Assembler::zero, no_safepoint); 843 lea(rscratch1, ExternalAddress((address)safepoint_table)); 844 jmpb(dispatch); 845 } 846 847 bind(no_safepoint); 848 lea(rscratch1, ExternalAddress((address)table)); 849 bind(dispatch); 850 jmp(Address(rscratch1, rbx, Address::times_8)); 851 852 #else 853 Address index(noreg, rbx, Address::times_ptr); 854 if (SafepointMechanism::uses_thread_local_poll() && table != safepoint_table && generate_poll) { 855 NOT_PRODUCT(block_comment("Thread-local Safepoint poll")); 856 Label no_safepoint; 857 const Register thread = rcx; 858 get_thread(thread); 859 testb(Address(thread, Thread::polling_page_offset()), SafepointMechanism::poll_bit()); 860 861 jccb(Assembler::zero, no_safepoint); 862 ArrayAddress dispatch_addr(ExternalAddress((address)safepoint_table), index); 863 jump(dispatch_addr); 864 bind(no_safepoint); 865 } 866 867 { 868 ArrayAddress dispatch_addr(ExternalAddress((address)table), index); 869 jump(dispatch_addr); 870 } 871 #endif // _LP64 872 } 873 874 void InterpreterMacroAssembler::dispatch_only(TosState state, bool generate_poll) { 875 dispatch_base(state, Interpreter::dispatch_table(state), true, generate_poll); 876 } 877 878 void InterpreterMacroAssembler::dispatch_only_normal(TosState state) { 879 dispatch_base(state, Interpreter::normal_table(state)); 880 } 881 882 void InterpreterMacroAssembler::dispatch_only_noverify(TosState state) { 883 dispatch_base(state, Interpreter::normal_table(state), false); 884 } 885 886 887 void InterpreterMacroAssembler::dispatch_next(TosState state, int step, bool generate_poll) { 888 // load next bytecode (load before advancing _bcp_register to prevent AGI) 889 load_unsigned_byte(rbx, Address(_bcp_register, step)); 890 // advance _bcp_register 891 increment(_bcp_register, step); 892 dispatch_base(state, Interpreter::dispatch_table(state), true, generate_poll); 893 } 894 895 void InterpreterMacroAssembler::dispatch_via(TosState state, address* table) { 896 // load current bytecode 897 load_unsigned_byte(rbx, Address(_bcp_register, 0)); 898 dispatch_base(state, table); 899 } 900 901 void InterpreterMacroAssembler::narrow(Register result) { 902 903 // Get method->_constMethod->_result_type 904 movptr(rcx, Address(rbp, frame::interpreter_frame_method_offset * wordSize)); 905 movptr(rcx, Address(rcx, Method::const_offset())); 906 load_unsigned_byte(rcx, Address(rcx, ConstMethod::result_type_offset())); 907 908 Label done, notBool, notByte, notChar; 909 910 // common case first 911 cmpl(rcx, T_INT); 912 jcc(Assembler::equal, done); 913 914 // mask integer result to narrower return type. 915 cmpl(rcx, T_BOOLEAN); 916 jcc(Assembler::notEqual, notBool); 917 andl(result, 0x1); 918 jmp(done); 919 920 bind(notBool); 921 cmpl(rcx, T_BYTE); 922 jcc(Assembler::notEqual, notByte); 923 LP64_ONLY(movsbl(result, result);) 924 NOT_LP64(shll(result, 24);) // truncate upper 24 bits 925 NOT_LP64(sarl(result, 24);) // and sign-extend byte 926 jmp(done); 927 928 bind(notByte); 929 cmpl(rcx, T_CHAR); 930 jcc(Assembler::notEqual, notChar); 931 LP64_ONLY(movzwl(result, result);) 932 NOT_LP64(andl(result, 0xFFFF);) // truncate upper 16 bits 933 jmp(done); 934 935 bind(notChar); 936 // cmpl(rcx, T_SHORT); // all that's left 937 // jcc(Assembler::notEqual, done); 938 LP64_ONLY(movswl(result, result);) 939 NOT_LP64(shll(result, 16);) // truncate upper 16 bits 940 NOT_LP64(sarl(result, 16);) // and sign-extend short 941 942 // Nothing to do for T_INT 943 bind(done); 944 } 945 946 // remove activation 947 // 948 // Unlock the receiver if this is a synchronized method. 949 // Unlock any Java monitors from syncronized blocks. 950 // Remove the activation from the stack. 951 // 952 // If there are locked Java monitors 953 // If throw_monitor_exception 954 // throws IllegalMonitorStateException 955 // Else if install_monitor_exception 956 // installs IllegalMonitorStateException 957 // Else 958 // no error processing 959 void InterpreterMacroAssembler::remove_activation( 960 TosState state, 961 Register ret_addr, 962 bool throw_monitor_exception, 963 bool install_monitor_exception, 964 bool notify_jvmdi) { 965 // Note: Registers rdx xmm0 may be in use for the 966 // result check if synchronized method 967 Label unlocked, unlock, no_unlock; 968 969 const Register rthread = LP64_ONLY(r15_thread) NOT_LP64(rcx); 970 const Register robj = LP64_ONLY(c_rarg1) NOT_LP64(rdx); 971 const Register rmon = LP64_ONLY(c_rarg1) NOT_LP64(rcx); 972 // monitor pointers need different register 973 // because rdx may have the result in it 974 NOT_LP64(get_thread(rcx);) 975 976 // get the value of _do_not_unlock_if_synchronized into rdx 977 const Address do_not_unlock_if_synchronized(rthread, 978 in_bytes(JavaThread::do_not_unlock_if_synchronized_offset())); 979 movbool(rbx, do_not_unlock_if_synchronized); 980 movbool(do_not_unlock_if_synchronized, false); // reset the flag 981 982 // get method access flags 983 movptr(rcx, Address(rbp, frame::interpreter_frame_method_offset * wordSize)); 984 movl(rcx, Address(rcx, Method::access_flags_offset())); 985 testl(rcx, JVM_ACC_SYNCHRONIZED); 986 jcc(Assembler::zero, unlocked); 987 988 // Don't unlock anything if the _do_not_unlock_if_synchronized flag 989 // is set. 990 testbool(rbx); 991 jcc(Assembler::notZero, no_unlock); 992 993 // unlock monitor 994 push(state); // save result 995 996 // BasicObjectLock will be first in list, since this is a 997 // synchronized method. However, need to check that the object has 998 // not been unlocked by an explicit monitorexit bytecode. 999 const Address monitor(rbp, frame::interpreter_frame_initial_sp_offset * 1000 wordSize - (int) sizeof(BasicObjectLock)); 1001 // We use c_rarg1/rdx so that if we go slow path it will be the correct 1002 // register for unlock_object to pass to VM directly 1003 lea(robj, monitor); // address of first monitor 1004 1005 movptr(rax, Address(robj, BasicObjectLock::obj_offset_in_bytes())); 1006 testptr(rax, rax); 1007 jcc(Assembler::notZero, unlock); 1008 1009 pop(state); 1010 if (throw_monitor_exception) { 1011 // Entry already unlocked, need to throw exception 1012 NOT_LP64(empty_FPU_stack();) // remove possible return value from FPU-stack, otherwise stack could overflow 1013 call_VM(noreg, CAST_FROM_FN_PTR(address, 1014 InterpreterRuntime::throw_illegal_monitor_state_exception)); 1015 should_not_reach_here(); 1016 } else { 1017 // Monitor already unlocked during a stack unroll. If requested, 1018 // install an illegal_monitor_state_exception. Continue with 1019 // stack unrolling. 1020 if (install_monitor_exception) { 1021 NOT_LP64(empty_FPU_stack();) 1022 call_VM(noreg, CAST_FROM_FN_PTR(address, 1023 InterpreterRuntime::new_illegal_monitor_state_exception)); 1024 } 1025 jmp(unlocked); 1026 } 1027 1028 bind(unlock); 1029 unlock_object(robj); 1030 pop(state); 1031 1032 // Check that for block-structured locking (i.e., that all locked 1033 // objects has been unlocked) 1034 bind(unlocked); 1035 1036 // rax, rdx: Might contain return value 1037 1038 // Check that all monitors are unlocked 1039 { 1040 Label loop, exception, entry, restart; 1041 const int entry_size = frame::interpreter_frame_monitor_size() * wordSize; 1042 const Address monitor_block_top( 1043 rbp, frame::interpreter_frame_monitor_block_top_offset * wordSize); 1044 const Address monitor_block_bot( 1045 rbp, frame::interpreter_frame_initial_sp_offset * wordSize); 1046 1047 bind(restart); 1048 // We use c_rarg1 so that if we go slow path it will be the correct 1049 // register for unlock_object to pass to VM directly 1050 movptr(rmon, monitor_block_top); // points to current entry, starting 1051 // with top-most entry 1052 lea(rbx, monitor_block_bot); // points to word before bottom of 1053 // monitor block 1054 jmp(entry); 1055 1056 // Entry already locked, need to throw exception 1057 bind(exception); 1058 1059 if (throw_monitor_exception) { 1060 // Throw exception 1061 NOT_LP64(empty_FPU_stack();) 1062 MacroAssembler::call_VM(noreg, 1063 CAST_FROM_FN_PTR(address, InterpreterRuntime:: 1064 throw_illegal_monitor_state_exception)); 1065 should_not_reach_here(); 1066 } else { 1067 // Stack unrolling. Unlock object and install illegal_monitor_exception. 1068 // Unlock does not block, so don't have to worry about the frame. 1069 // We don't have to preserve c_rarg1 since we are going to throw an exception. 1070 1071 push(state); 1072 mov(robj, rmon); // nop if robj and rmon are the same 1073 unlock_object(robj); 1074 pop(state); 1075 1076 if (install_monitor_exception) { 1077 NOT_LP64(empty_FPU_stack();) 1078 call_VM(noreg, CAST_FROM_FN_PTR(address, 1079 InterpreterRuntime:: 1080 new_illegal_monitor_state_exception)); 1081 } 1082 1083 jmp(restart); 1084 } 1085 1086 bind(loop); 1087 // check if current entry is used 1088 cmpptr(Address(rmon, BasicObjectLock::obj_offset_in_bytes()), (int32_t) NULL); 1089 jcc(Assembler::notEqual, exception); 1090 1091 addptr(rmon, entry_size); // otherwise advance to next entry 1092 bind(entry); 1093 cmpptr(rmon, rbx); // check if bottom reached 1094 jcc(Assembler::notEqual, loop); // if not at bottom then check this entry 1095 } 1096 1097 bind(no_unlock); 1098 1099 // jvmti support 1100 if (notify_jvmdi) { 1101 notify_method_exit(state, NotifyJVMTI); // preserve TOSCA 1102 } else { 1103 notify_method_exit(state, SkipNotifyJVMTI); // preserve TOSCA 1104 } 1105 1106 // remove activation 1107 // get sender sp 1108 movptr(rbx, 1109 Address(rbp, frame::interpreter_frame_sender_sp_offset * wordSize)); 1110 if (StackReservedPages > 0) { 1111 // testing if reserved zone needs to be re-enabled 1112 Register rthread = LP64_ONLY(r15_thread) NOT_LP64(rcx); 1113 Label no_reserved_zone_enabling; 1114 1115 NOT_LP64(get_thread(rthread);) 1116 1117 cmpl(Address(rthread, JavaThread::stack_guard_state_offset()), JavaThread::stack_guard_enabled); 1118 jcc(Assembler::equal, no_reserved_zone_enabling); 1119 1120 cmpptr(rbx, Address(rthread, JavaThread::reserved_stack_activation_offset())); 1121 jcc(Assembler::lessEqual, no_reserved_zone_enabling); 1122 1123 call_VM_leaf( 1124 CAST_FROM_FN_PTR(address, SharedRuntime::enable_stack_reserved_zone), rthread); 1125 call_VM(noreg, CAST_FROM_FN_PTR(address, 1126 InterpreterRuntime::throw_delayed_StackOverflowError)); 1127 should_not_reach_here(); 1128 1129 bind(no_reserved_zone_enabling); 1130 } 1131 leave(); // remove frame anchor 1132 pop(ret_addr); // get return address 1133 mov(rsp, rbx); // set sp to sender sp 1134 } 1135 1136 void InterpreterMacroAssembler::get_method_counters(Register method, 1137 Register mcs, Label& skip) { 1138 Label has_counters; 1139 movptr(mcs, Address(method, Method::method_counters_offset())); 1140 testptr(mcs, mcs); 1141 jcc(Assembler::notZero, has_counters); 1142 call_VM(noreg, CAST_FROM_FN_PTR(address, 1143 InterpreterRuntime::build_method_counters), method); 1144 movptr(mcs, Address(method,Method::method_counters_offset())); 1145 testptr(mcs, mcs); 1146 jcc(Assembler::zero, skip); // No MethodCounters allocated, OutOfMemory 1147 bind(has_counters); 1148 } 1149 1150 1151 // Lock object 1152 // 1153 // Args: 1154 // rdx, c_rarg1: BasicObjectLock to be used for locking 1155 // 1156 // Kills: 1157 // rax, rbx 1158 void InterpreterMacroAssembler::lock_object(Register lock_reg) { 1159 assert(lock_reg == LP64_ONLY(c_rarg1) NOT_LP64(rdx), 1160 "The argument is only for looks. It must be c_rarg1"); 1161 1162 if (UseHeavyMonitors) { 1163 call_VM(noreg, 1164 CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorenter), 1165 lock_reg); 1166 } else { 1167 Label done; 1168 1169 const Register swap_reg = rax; // Must use rax for cmpxchg instruction 1170 const Register tmp_reg = rbx; // Will be passed to biased_locking_enter to avoid a 1171 // problematic case where tmp_reg = no_reg. 1172 const Register obj_reg = LP64_ONLY(c_rarg3) NOT_LP64(rcx); // Will contain the oop 1173 1174 const int obj_offset = BasicObjectLock::obj_offset_in_bytes(); 1175 const int lock_offset = BasicObjectLock::lock_offset_in_bytes (); 1176 const int mark_offset = lock_offset + 1177 BasicLock::displaced_header_offset_in_bytes(); 1178 1179 Label slow_case; 1180 1181 // Load object pointer into obj_reg 1182 movptr(obj_reg, Address(lock_reg, obj_offset)); 1183 1184 if (UseBiasedLocking) { 1185 biased_locking_enter(lock_reg, obj_reg, swap_reg, tmp_reg, false, done, &slow_case); 1186 } 1187 1188 // Load immediate 1 into swap_reg %rax 1189 movl(swap_reg, (int32_t)1); 1190 1191 // Load (object->mark() | 1) into swap_reg %rax 1192 orptr(swap_reg, Address(obj_reg, oopDesc::mark_offset_in_bytes())); 1193 1194 // Save (object->mark() | 1) into BasicLock's displaced header 1195 movptr(Address(lock_reg, mark_offset), swap_reg); 1196 1197 assert(lock_offset == 0, 1198 "displaced header must be first word in BasicObjectLock"); 1199 1200 if (os::is_MP()) lock(); 1201 cmpxchgptr(lock_reg, Address(obj_reg, oopDesc::mark_offset_in_bytes())); 1202 if (PrintBiasedLockingStatistics) { 1203 cond_inc32(Assembler::zero, 1204 ExternalAddress((address) BiasedLocking::fast_path_entry_count_addr())); 1205 } 1206 jcc(Assembler::zero, done); 1207 1208 const int zero_bits = LP64_ONLY(7) NOT_LP64(3); 1209 1210 // Test if the oopMark is an obvious stack pointer, i.e., 1211 // 1) (mark & zero_bits) == 0, and 1212 // 2) rsp <= mark < mark + os::pagesize() 1213 // 1214 // These 3 tests can be done by evaluating the following 1215 // expression: ((mark - rsp) & (zero_bits - os::vm_page_size())), 1216 // assuming both stack pointer and pagesize have their 1217 // least significant bits clear. 1218 // NOTE: the oopMark is in swap_reg %rax as the result of cmpxchg 1219 subptr(swap_reg, rsp); 1220 andptr(swap_reg, zero_bits - os::vm_page_size()); 1221 1222 // Save the test result, for recursive case, the result is zero 1223 movptr(Address(lock_reg, mark_offset), swap_reg); 1224 1225 if (PrintBiasedLockingStatistics) { 1226 cond_inc32(Assembler::zero, 1227 ExternalAddress((address) BiasedLocking::fast_path_entry_count_addr())); 1228 } 1229 jcc(Assembler::zero, done); 1230 1231 bind(slow_case); 1232 1233 // Call the runtime routine for slow case 1234 call_VM(noreg, 1235 CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorenter), 1236 lock_reg); 1237 1238 bind(done); 1239 } 1240 } 1241 1242 1243 // Unlocks an object. Used in monitorexit bytecode and 1244 // remove_activation. Throws an IllegalMonitorException if object is 1245 // not locked by current thread. 1246 // 1247 // Args: 1248 // rdx, c_rarg1: BasicObjectLock for lock 1249 // 1250 // Kills: 1251 // rax 1252 // c_rarg0, c_rarg1, c_rarg2, c_rarg3, ... (param regs) 1253 // rscratch1 (scratch reg) 1254 // rax, rbx, rcx, rdx 1255 void InterpreterMacroAssembler::unlock_object(Register lock_reg) { 1256 assert(lock_reg == LP64_ONLY(c_rarg1) NOT_LP64(rdx), 1257 "The argument is only for looks. It must be c_rarg1"); 1258 1259 if (UseHeavyMonitors) { 1260 call_VM(noreg, 1261 CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorexit), 1262 lock_reg); 1263 } else { 1264 Label done; 1265 1266 const Register swap_reg = rax; // Must use rax for cmpxchg instruction 1267 const Register header_reg = LP64_ONLY(c_rarg2) NOT_LP64(rbx); // Will contain the old oopMark 1268 const Register obj_reg = LP64_ONLY(c_rarg3) NOT_LP64(rcx); // Will contain the oop 1269 1270 save_bcp(); // Save in case of exception 1271 1272 // Convert from BasicObjectLock structure to object and BasicLock 1273 // structure Store the BasicLock address into %rax 1274 lea(swap_reg, Address(lock_reg, BasicObjectLock::lock_offset_in_bytes())); 1275 1276 // Load oop into obj_reg(%c_rarg3) 1277 movptr(obj_reg, Address(lock_reg, BasicObjectLock::obj_offset_in_bytes())); 1278 1279 // Free entry 1280 movptr(Address(lock_reg, BasicObjectLock::obj_offset_in_bytes()), (int32_t)NULL_WORD); 1281 1282 if (UseBiasedLocking) { 1283 biased_locking_exit(obj_reg, header_reg, done); 1284 } 1285 1286 // Load the old header from BasicLock structure 1287 movptr(header_reg, Address(swap_reg, 1288 BasicLock::displaced_header_offset_in_bytes())); 1289 1290 // Test for recursion 1291 testptr(header_reg, header_reg); 1292 1293 // zero for recursive case 1294 jcc(Assembler::zero, done); 1295 1296 // Atomic swap back the old header 1297 if (os::is_MP()) lock(); 1298 cmpxchgptr(header_reg, Address(obj_reg, oopDesc::mark_offset_in_bytes())); 1299 1300 // zero for simple unlock of a stack-lock case 1301 jcc(Assembler::zero, done); 1302 1303 // Call the runtime routine for slow case. 1304 movptr(Address(lock_reg, BasicObjectLock::obj_offset_in_bytes()), 1305 obj_reg); // restore obj 1306 call_VM(noreg, 1307 CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorexit), 1308 lock_reg); 1309 1310 bind(done); 1311 1312 restore_bcp(); 1313 } 1314 } 1315 1316 void InterpreterMacroAssembler::test_method_data_pointer(Register mdp, 1317 Label& zero_continue) { 1318 assert(ProfileInterpreter, "must be profiling interpreter"); 1319 movptr(mdp, Address(rbp, frame::interpreter_frame_mdp_offset * wordSize)); 1320 testptr(mdp, mdp); 1321 jcc(Assembler::zero, zero_continue); 1322 } 1323 1324 1325 // Set the method data pointer for the current bcp. 1326 void InterpreterMacroAssembler::set_method_data_pointer_for_bcp() { 1327 assert(ProfileInterpreter, "must be profiling interpreter"); 1328 Label set_mdp; 1329 push(rax); 1330 push(rbx); 1331 1332 get_method(rbx); 1333 // Test MDO to avoid the call if it is NULL. 1334 movptr(rax, Address(rbx, in_bytes(Method::method_data_offset()))); 1335 testptr(rax, rax); 1336 jcc(Assembler::zero, set_mdp); 1337 // rbx: method 1338 // _bcp_register: bcp 1339 call_VM_leaf(CAST_FROM_FN_PTR(address, InterpreterRuntime::bcp_to_di), rbx, _bcp_register); 1340 // rax: mdi 1341 // mdo is guaranteed to be non-zero here, we checked for it before the call. 1342 movptr(rbx, Address(rbx, in_bytes(Method::method_data_offset()))); 1343 addptr(rbx, in_bytes(MethodData::data_offset())); 1344 addptr(rax, rbx); 1345 bind(set_mdp); 1346 movptr(Address(rbp, frame::interpreter_frame_mdp_offset * wordSize), rax); 1347 pop(rbx); 1348 pop(rax); 1349 } 1350 1351 void InterpreterMacroAssembler::verify_method_data_pointer() { 1352 assert(ProfileInterpreter, "must be profiling interpreter"); 1353 #ifdef ASSERT 1354 Label verify_continue; 1355 push(rax); 1356 push(rbx); 1357 Register arg3_reg = LP64_ONLY(c_rarg3) NOT_LP64(rcx); 1358 Register arg2_reg = LP64_ONLY(c_rarg2) NOT_LP64(rdx); 1359 push(arg3_reg); 1360 push(arg2_reg); 1361 test_method_data_pointer(arg3_reg, verify_continue); // If mdp is zero, continue 1362 get_method(rbx); 1363 1364 // If the mdp is valid, it will point to a DataLayout header which is 1365 // consistent with the bcp. The converse is highly probable also. 1366 load_unsigned_short(arg2_reg, 1367 Address(arg3_reg, in_bytes(DataLayout::bci_offset()))); 1368 addptr(arg2_reg, Address(rbx, Method::const_offset())); 1369 lea(arg2_reg, Address(arg2_reg, ConstMethod::codes_offset())); 1370 cmpptr(arg2_reg, _bcp_register); 1371 jcc(Assembler::equal, verify_continue); 1372 // rbx: method 1373 // _bcp_register: bcp 1374 // c_rarg3: mdp 1375 call_VM_leaf(CAST_FROM_FN_PTR(address, InterpreterRuntime::verify_mdp), 1376 rbx, _bcp_register, arg3_reg); 1377 bind(verify_continue); 1378 pop(arg2_reg); 1379 pop(arg3_reg); 1380 pop(rbx); 1381 pop(rax); 1382 #endif // ASSERT 1383 } 1384 1385 1386 void InterpreterMacroAssembler::set_mdp_data_at(Register mdp_in, 1387 int constant, 1388 Register value) { 1389 assert(ProfileInterpreter, "must be profiling interpreter"); 1390 Address data(mdp_in, constant); 1391 movptr(data, value); 1392 } 1393 1394 1395 void InterpreterMacroAssembler::increment_mdp_data_at(Register mdp_in, 1396 int constant, 1397 bool decrement) { 1398 // Counter address 1399 Address data(mdp_in, constant); 1400 1401 increment_mdp_data_at(data, decrement); 1402 } 1403 1404 void InterpreterMacroAssembler::increment_mdp_data_at(Address data, 1405 bool decrement) { 1406 assert(ProfileInterpreter, "must be profiling interpreter"); 1407 // %%% this does 64bit counters at best it is wasting space 1408 // at worst it is a rare bug when counters overflow 1409 1410 if (decrement) { 1411 // Decrement the register. Set condition codes. 1412 addptr(data, (int32_t) -DataLayout::counter_increment); 1413 // If the decrement causes the counter to overflow, stay negative 1414 Label L; 1415 jcc(Assembler::negative, L); 1416 addptr(data, (int32_t) DataLayout::counter_increment); 1417 bind(L); 1418 } else { 1419 assert(DataLayout::counter_increment == 1, 1420 "flow-free idiom only works with 1"); 1421 // Increment the register. Set carry flag. 1422 addptr(data, DataLayout::counter_increment); 1423 // If the increment causes the counter to overflow, pull back by 1. 1424 sbbptr(data, (int32_t)0); 1425 } 1426 } 1427 1428 1429 void InterpreterMacroAssembler::increment_mdp_data_at(Register mdp_in, 1430 Register reg, 1431 int constant, 1432 bool decrement) { 1433 Address data(mdp_in, reg, Address::times_1, constant); 1434 1435 increment_mdp_data_at(data, decrement); 1436 } 1437 1438 void InterpreterMacroAssembler::set_mdp_flag_at(Register mdp_in, 1439 int flag_byte_constant) { 1440 assert(ProfileInterpreter, "must be profiling interpreter"); 1441 int header_offset = in_bytes(DataLayout::header_offset()); 1442 int header_bits = DataLayout::flag_mask_to_header_mask(flag_byte_constant); 1443 // Set the flag 1444 orl(Address(mdp_in, header_offset), header_bits); 1445 } 1446 1447 1448 1449 void InterpreterMacroAssembler::test_mdp_data_at(Register mdp_in, 1450 int offset, 1451 Register value, 1452 Register test_value_out, 1453 Label& not_equal_continue) { 1454 assert(ProfileInterpreter, "must be profiling interpreter"); 1455 if (test_value_out == noreg) { 1456 cmpptr(value, Address(mdp_in, offset)); 1457 } else { 1458 // Put the test value into a register, so caller can use it: 1459 movptr(test_value_out, Address(mdp_in, offset)); 1460 cmpptr(test_value_out, value); 1461 } 1462 jcc(Assembler::notEqual, not_equal_continue); 1463 } 1464 1465 1466 void InterpreterMacroAssembler::update_mdp_by_offset(Register mdp_in, 1467 int offset_of_disp) { 1468 assert(ProfileInterpreter, "must be profiling interpreter"); 1469 Address disp_address(mdp_in, offset_of_disp); 1470 addptr(mdp_in, disp_address); 1471 movptr(Address(rbp, frame::interpreter_frame_mdp_offset * wordSize), mdp_in); 1472 } 1473 1474 1475 void InterpreterMacroAssembler::update_mdp_by_offset(Register mdp_in, 1476 Register reg, 1477 int offset_of_disp) { 1478 assert(ProfileInterpreter, "must be profiling interpreter"); 1479 Address disp_address(mdp_in, reg, Address::times_1, offset_of_disp); 1480 addptr(mdp_in, disp_address); 1481 movptr(Address(rbp, frame::interpreter_frame_mdp_offset * wordSize), mdp_in); 1482 } 1483 1484 1485 void InterpreterMacroAssembler::update_mdp_by_constant(Register mdp_in, 1486 int constant) { 1487 assert(ProfileInterpreter, "must be profiling interpreter"); 1488 addptr(mdp_in, constant); 1489 movptr(Address(rbp, frame::interpreter_frame_mdp_offset * wordSize), mdp_in); 1490 } 1491 1492 1493 void InterpreterMacroAssembler::update_mdp_for_ret(Register return_bci) { 1494 assert(ProfileInterpreter, "must be profiling interpreter"); 1495 push(return_bci); // save/restore across call_VM 1496 call_VM(noreg, 1497 CAST_FROM_FN_PTR(address, InterpreterRuntime::update_mdp_for_ret), 1498 return_bci); 1499 pop(return_bci); 1500 } 1501 1502 1503 void InterpreterMacroAssembler::profile_taken_branch(Register mdp, 1504 Register bumped_count) { 1505 if (ProfileInterpreter) { 1506 Label profile_continue; 1507 1508 // If no method data exists, go to profile_continue. 1509 // Otherwise, assign to mdp 1510 test_method_data_pointer(mdp, profile_continue); 1511 1512 // We are taking a branch. Increment the taken count. 1513 // We inline increment_mdp_data_at to return bumped_count in a register 1514 //increment_mdp_data_at(mdp, in_bytes(JumpData::taken_offset())); 1515 Address data(mdp, in_bytes(JumpData::taken_offset())); 1516 movptr(bumped_count, data); 1517 assert(DataLayout::counter_increment == 1, 1518 "flow-free idiom only works with 1"); 1519 addptr(bumped_count, DataLayout::counter_increment); 1520 sbbptr(bumped_count, 0); 1521 movptr(data, bumped_count); // Store back out 1522 1523 // The method data pointer needs to be updated to reflect the new target. 1524 update_mdp_by_offset(mdp, in_bytes(JumpData::displacement_offset())); 1525 bind(profile_continue); 1526 } 1527 } 1528 1529 1530 void InterpreterMacroAssembler::profile_not_taken_branch(Register mdp) { 1531 if (ProfileInterpreter) { 1532 Label profile_continue; 1533 1534 // If no method data exists, go to profile_continue. 1535 test_method_data_pointer(mdp, profile_continue); 1536 1537 // We are taking a branch. Increment the not taken count. 1538 increment_mdp_data_at(mdp, in_bytes(BranchData::not_taken_offset())); 1539 1540 // The method data pointer needs to be updated to correspond to 1541 // the next bytecode 1542 update_mdp_by_constant(mdp, in_bytes(BranchData::branch_data_size())); 1543 bind(profile_continue); 1544 } 1545 } 1546 1547 void InterpreterMacroAssembler::profile_call(Register mdp) { 1548 if (ProfileInterpreter) { 1549 Label profile_continue; 1550 1551 // If no method data exists, go to profile_continue. 1552 test_method_data_pointer(mdp, profile_continue); 1553 1554 // We are making a call. Increment the count. 1555 increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset())); 1556 1557 // The method data pointer needs to be updated to reflect the new target. 1558 update_mdp_by_constant(mdp, in_bytes(CounterData::counter_data_size())); 1559 bind(profile_continue); 1560 } 1561 } 1562 1563 1564 void InterpreterMacroAssembler::profile_final_call(Register mdp) { 1565 if (ProfileInterpreter) { 1566 Label profile_continue; 1567 1568 // If no method data exists, go to profile_continue. 1569 test_method_data_pointer(mdp, profile_continue); 1570 1571 // We are making a call. Increment the count. 1572 increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset())); 1573 1574 // The method data pointer needs to be updated to reflect the new target. 1575 update_mdp_by_constant(mdp, 1576 in_bytes(VirtualCallData:: 1577 virtual_call_data_size())); 1578 bind(profile_continue); 1579 } 1580 } 1581 1582 1583 void InterpreterMacroAssembler::profile_virtual_call(Register receiver, 1584 Register mdp, 1585 Register reg2, 1586 bool receiver_can_be_null) { 1587 if (ProfileInterpreter) { 1588 Label profile_continue; 1589 1590 // If no method data exists, go to profile_continue. 1591 test_method_data_pointer(mdp, profile_continue); 1592 1593 Label skip_receiver_profile; 1594 if (receiver_can_be_null) { 1595 Label not_null; 1596 testptr(receiver, receiver); 1597 jccb(Assembler::notZero, not_null); 1598 // We are making a call. Increment the count for null receiver. 1599 increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset())); 1600 jmp(skip_receiver_profile); 1601 bind(not_null); 1602 } 1603 1604 // Record the receiver type. 1605 record_klass_in_profile(receiver, mdp, reg2, true); 1606 bind(skip_receiver_profile); 1607 1608 // The method data pointer needs to be updated to reflect the new target. 1609 #if INCLUDE_JVMCI 1610 if (MethodProfileWidth == 0) { 1611 update_mdp_by_constant(mdp, in_bytes(VirtualCallData::virtual_call_data_size())); 1612 } 1613 #else // INCLUDE_JVMCI 1614 update_mdp_by_constant(mdp, 1615 in_bytes(VirtualCallData:: 1616 virtual_call_data_size())); 1617 #endif // INCLUDE_JVMCI 1618 bind(profile_continue); 1619 } 1620 } 1621 1622 #if INCLUDE_JVMCI 1623 void InterpreterMacroAssembler::profile_called_method(Register method, Register mdp, Register reg2) { 1624 assert_different_registers(method, mdp, reg2); 1625 if (ProfileInterpreter && MethodProfileWidth > 0) { 1626 Label profile_continue; 1627 1628 // If no method data exists, go to profile_continue. 1629 test_method_data_pointer(mdp, profile_continue); 1630 1631 Label done; 1632 record_item_in_profile_helper(method, mdp, reg2, 0, done, MethodProfileWidth, 1633 &VirtualCallData::method_offset, &VirtualCallData::method_count_offset, in_bytes(VirtualCallData::nonprofiled_receiver_count_offset())); 1634 bind(done); 1635 1636 update_mdp_by_constant(mdp, in_bytes(VirtualCallData::virtual_call_data_size())); 1637 bind(profile_continue); 1638 } 1639 } 1640 #endif // INCLUDE_JVMCI 1641 1642 // This routine creates a state machine for updating the multi-row 1643 // type profile at a virtual call site (or other type-sensitive bytecode). 1644 // The machine visits each row (of receiver/count) until the receiver type 1645 // is found, or until it runs out of rows. At the same time, it remembers 1646 // the location of the first empty row. (An empty row records null for its 1647 // receiver, and can be allocated for a newly-observed receiver type.) 1648 // Because there are two degrees of freedom in the state, a simple linear 1649 // search will not work; it must be a decision tree. Hence this helper 1650 // function is recursive, to generate the required tree structured code. 1651 // It's the interpreter, so we are trading off code space for speed. 1652 // See below for example code. 1653 void InterpreterMacroAssembler::record_klass_in_profile_helper( 1654 Register receiver, Register mdp, 1655 Register reg2, int start_row, 1656 Label& done, bool is_virtual_call) { 1657 if (TypeProfileWidth == 0) { 1658 if (is_virtual_call) { 1659 increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset())); 1660 } 1661 #if INCLUDE_JVMCI 1662 else if (EnableJVMCI) { 1663 increment_mdp_data_at(mdp, in_bytes(ReceiverTypeData::nonprofiled_receiver_count_offset())); 1664 } 1665 #endif // INCLUDE_JVMCI 1666 } else { 1667 int non_profiled_offset = -1; 1668 if (is_virtual_call) { 1669 non_profiled_offset = in_bytes(CounterData::count_offset()); 1670 } 1671 #if INCLUDE_JVMCI 1672 else if (EnableJVMCI) { 1673 non_profiled_offset = in_bytes(ReceiverTypeData::nonprofiled_receiver_count_offset()); 1674 } 1675 #endif // INCLUDE_JVMCI 1676 1677 record_item_in_profile_helper(receiver, mdp, reg2, 0, done, TypeProfileWidth, 1678 &VirtualCallData::receiver_offset, &VirtualCallData::receiver_count_offset, non_profiled_offset); 1679 } 1680 } 1681 1682 void InterpreterMacroAssembler::record_item_in_profile_helper(Register item, Register mdp, 1683 Register reg2, int start_row, Label& done, int total_rows, 1684 OffsetFunction item_offset_fn, OffsetFunction item_count_offset_fn, 1685 int non_profiled_offset) { 1686 int last_row = total_rows - 1; 1687 assert(start_row <= last_row, "must be work left to do"); 1688 // Test this row for both the item and for null. 1689 // Take any of three different outcomes: 1690 // 1. found item => increment count and goto done 1691 // 2. found null => keep looking for case 1, maybe allocate this cell 1692 // 3. found something else => keep looking for cases 1 and 2 1693 // Case 3 is handled by a recursive call. 1694 for (int row = start_row; row <= last_row; row++) { 1695 Label next_test; 1696 bool test_for_null_also = (row == start_row); 1697 1698 // See if the item is item[n]. 1699 int item_offset = in_bytes(item_offset_fn(row)); 1700 test_mdp_data_at(mdp, item_offset, item, 1701 (test_for_null_also ? reg2 : noreg), 1702 next_test); 1703 // (Reg2 now contains the item from the CallData.) 1704 1705 // The item is item[n]. Increment count[n]. 1706 int count_offset = in_bytes(item_count_offset_fn(row)); 1707 increment_mdp_data_at(mdp, count_offset); 1708 jmp(done); 1709 bind(next_test); 1710 1711 if (test_for_null_also) { 1712 Label found_null; 1713 // Failed the equality check on item[n]... Test for null. 1714 testptr(reg2, reg2); 1715 if (start_row == last_row) { 1716 // The only thing left to do is handle the null case. 1717 if (non_profiled_offset >= 0) { 1718 jccb(Assembler::zero, found_null); 1719 // Item did not match any saved item and there is no empty row for it. 1720 // Increment total counter to indicate polymorphic case. 1721 increment_mdp_data_at(mdp, non_profiled_offset); 1722 jmp(done); 1723 bind(found_null); 1724 } else { 1725 jcc(Assembler::notZero, done); 1726 } 1727 break; 1728 } 1729 // Since null is rare, make it be the branch-taken case. 1730 jcc(Assembler::zero, found_null); 1731 1732 // Put all the "Case 3" tests here. 1733 record_item_in_profile_helper(item, mdp, reg2, start_row + 1, done, total_rows, 1734 item_offset_fn, item_count_offset_fn, non_profiled_offset); 1735 1736 // Found a null. Keep searching for a matching item, 1737 // but remember that this is an empty (unused) slot. 1738 bind(found_null); 1739 } 1740 } 1741 1742 // In the fall-through case, we found no matching item, but we 1743 // observed the item[start_row] is NULL. 1744 1745 // Fill in the item field and increment the count. 1746 int item_offset = in_bytes(item_offset_fn(start_row)); 1747 set_mdp_data_at(mdp, item_offset, item); 1748 int count_offset = in_bytes(item_count_offset_fn(start_row)); 1749 movl(reg2, DataLayout::counter_increment); 1750 set_mdp_data_at(mdp, count_offset, reg2); 1751 if (start_row > 0) { 1752 jmp(done); 1753 } 1754 } 1755 1756 // Example state machine code for three profile rows: 1757 // // main copy of decision tree, rooted at row[1] 1758 // if (row[0].rec == rec) { row[0].incr(); goto done; } 1759 // if (row[0].rec != NULL) { 1760 // // inner copy of decision tree, rooted at row[1] 1761 // if (row[1].rec == rec) { row[1].incr(); goto done; } 1762 // if (row[1].rec != NULL) { 1763 // // degenerate decision tree, rooted at row[2] 1764 // if (row[2].rec == rec) { row[2].incr(); goto done; } 1765 // if (row[2].rec != NULL) { count.incr(); goto done; } // overflow 1766 // row[2].init(rec); goto done; 1767 // } else { 1768 // // remember row[1] is empty 1769 // if (row[2].rec == rec) { row[2].incr(); goto done; } 1770 // row[1].init(rec); goto done; 1771 // } 1772 // } else { 1773 // // remember row[0] is empty 1774 // if (row[1].rec == rec) { row[1].incr(); goto done; } 1775 // if (row[2].rec == rec) { row[2].incr(); goto done; } 1776 // row[0].init(rec); goto done; 1777 // } 1778 // done: 1779 1780 void InterpreterMacroAssembler::record_klass_in_profile(Register receiver, 1781 Register mdp, Register reg2, 1782 bool is_virtual_call) { 1783 assert(ProfileInterpreter, "must be profiling"); 1784 Label done; 1785 1786 record_klass_in_profile_helper(receiver, mdp, reg2, 0, done, is_virtual_call); 1787 1788 bind (done); 1789 } 1790 1791 void InterpreterMacroAssembler::profile_ret(Register return_bci, 1792 Register mdp) { 1793 if (ProfileInterpreter) { 1794 Label profile_continue; 1795 uint row; 1796 1797 // If no method data exists, go to profile_continue. 1798 test_method_data_pointer(mdp, profile_continue); 1799 1800 // Update the total ret count. 1801 increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset())); 1802 1803 for (row = 0; row < RetData::row_limit(); row++) { 1804 Label next_test; 1805 1806 // See if return_bci is equal to bci[n]: 1807 test_mdp_data_at(mdp, 1808 in_bytes(RetData::bci_offset(row)), 1809 return_bci, noreg, 1810 next_test); 1811 1812 // return_bci is equal to bci[n]. Increment the count. 1813 increment_mdp_data_at(mdp, in_bytes(RetData::bci_count_offset(row))); 1814 1815 // The method data pointer needs to be updated to reflect the new target. 1816 update_mdp_by_offset(mdp, 1817 in_bytes(RetData::bci_displacement_offset(row))); 1818 jmp(profile_continue); 1819 bind(next_test); 1820 } 1821 1822 update_mdp_for_ret(return_bci); 1823 1824 bind(profile_continue); 1825 } 1826 } 1827 1828 1829 void InterpreterMacroAssembler::profile_null_seen(Register mdp) { 1830 if (ProfileInterpreter) { 1831 Label profile_continue; 1832 1833 // If no method data exists, go to profile_continue. 1834 test_method_data_pointer(mdp, profile_continue); 1835 1836 set_mdp_flag_at(mdp, BitData::null_seen_byte_constant()); 1837 1838 // The method data pointer needs to be updated. 1839 int mdp_delta = in_bytes(BitData::bit_data_size()); 1840 if (TypeProfileCasts) { 1841 mdp_delta = in_bytes(VirtualCallData::virtual_call_data_size()); 1842 } 1843 update_mdp_by_constant(mdp, mdp_delta); 1844 1845 bind(profile_continue); 1846 } 1847 } 1848 1849 1850 void InterpreterMacroAssembler::profile_typecheck_failed(Register mdp) { 1851 if (ProfileInterpreter && TypeProfileCasts) { 1852 Label profile_continue; 1853 1854 // If no method data exists, go to profile_continue. 1855 test_method_data_pointer(mdp, profile_continue); 1856 1857 int count_offset = in_bytes(CounterData::count_offset()); 1858 // Back up the address, since we have already bumped the mdp. 1859 count_offset -= in_bytes(VirtualCallData::virtual_call_data_size()); 1860 1861 // *Decrement* the counter. We expect to see zero or small negatives. 1862 increment_mdp_data_at(mdp, count_offset, true); 1863 1864 bind (profile_continue); 1865 } 1866 } 1867 1868 1869 void InterpreterMacroAssembler::profile_typecheck(Register mdp, Register klass, Register reg2) { 1870 if (ProfileInterpreter) { 1871 Label profile_continue; 1872 1873 // If no method data exists, go to profile_continue. 1874 test_method_data_pointer(mdp, profile_continue); 1875 1876 // The method data pointer needs to be updated. 1877 int mdp_delta = in_bytes(BitData::bit_data_size()); 1878 if (TypeProfileCasts) { 1879 mdp_delta = in_bytes(VirtualCallData::virtual_call_data_size()); 1880 1881 // Record the object type. 1882 record_klass_in_profile(klass, mdp, reg2, false); 1883 NOT_LP64(assert(reg2 == rdi, "we know how to fix this blown reg");) 1884 NOT_LP64(restore_locals();) // Restore EDI 1885 } 1886 update_mdp_by_constant(mdp, mdp_delta); 1887 1888 bind(profile_continue); 1889 } 1890 } 1891 1892 1893 void InterpreterMacroAssembler::profile_switch_default(Register mdp) { 1894 if (ProfileInterpreter) { 1895 Label profile_continue; 1896 1897 // If no method data exists, go to profile_continue. 1898 test_method_data_pointer(mdp, profile_continue); 1899 1900 // Update the default case count 1901 increment_mdp_data_at(mdp, 1902 in_bytes(MultiBranchData::default_count_offset())); 1903 1904 // The method data pointer needs to be updated. 1905 update_mdp_by_offset(mdp, 1906 in_bytes(MultiBranchData:: 1907 default_displacement_offset())); 1908 1909 bind(profile_continue); 1910 } 1911 } 1912 1913 1914 void InterpreterMacroAssembler::profile_switch_case(Register index, 1915 Register mdp, 1916 Register reg2) { 1917 if (ProfileInterpreter) { 1918 Label profile_continue; 1919 1920 // If no method data exists, go to profile_continue. 1921 test_method_data_pointer(mdp, profile_continue); 1922 1923 // Build the base (index * per_case_size_in_bytes()) + 1924 // case_array_offset_in_bytes() 1925 movl(reg2, in_bytes(MultiBranchData::per_case_size())); 1926 imulptr(index, reg2); // XXX l ? 1927 addptr(index, in_bytes(MultiBranchData::case_array_offset())); // XXX l ? 1928 1929 // Update the case count 1930 increment_mdp_data_at(mdp, 1931 index, 1932 in_bytes(MultiBranchData::relative_count_offset())); 1933 1934 // The method data pointer needs to be updated. 1935 update_mdp_by_offset(mdp, 1936 index, 1937 in_bytes(MultiBranchData:: 1938 relative_displacement_offset())); 1939 1940 bind(profile_continue); 1941 } 1942 } 1943 1944 1945 1946 void InterpreterMacroAssembler::verify_oop(Register reg, TosState state) { 1947 if (state == atos) { 1948 MacroAssembler::verify_oop(reg); 1949 } 1950 } 1951 1952 void InterpreterMacroAssembler::verify_FPU(int stack_depth, TosState state) { 1953 #ifndef _LP64 1954 if ((state == ftos && UseSSE < 1) || 1955 (state == dtos && UseSSE < 2)) { 1956 MacroAssembler::verify_FPU(stack_depth); 1957 } 1958 #endif 1959 } 1960 1961 // Jump if ((*counter_addr += increment) & mask) satisfies the condition. 1962 void InterpreterMacroAssembler::increment_mask_and_jump(Address counter_addr, 1963 int increment, Address mask, 1964 Register scratch, bool preloaded, 1965 Condition cond, Label* where) { 1966 if (!preloaded) { 1967 movl(scratch, counter_addr); 1968 } 1969 incrementl(scratch, increment); 1970 movl(counter_addr, scratch); 1971 andl(scratch, mask); 1972 jcc(cond, *where); 1973 } 1974 1975 void InterpreterMacroAssembler::notify_method_entry() { 1976 // Whenever JVMTI is interp_only_mode, method entry/exit events are sent to 1977 // track stack depth. If it is possible to enter interp_only_mode we add 1978 // the code to check if the event should be sent. 1979 Register rthread = LP64_ONLY(r15_thread) NOT_LP64(rcx); 1980 Register rarg = LP64_ONLY(c_rarg1) NOT_LP64(rbx); 1981 if (JvmtiExport::can_post_interpreter_events()) { 1982 Label L; 1983 NOT_LP64(get_thread(rthread);) 1984 movl(rdx, Address(rthread, JavaThread::interp_only_mode_offset())); 1985 testl(rdx, rdx); 1986 jcc(Assembler::zero, L); 1987 call_VM(noreg, CAST_FROM_FN_PTR(address, 1988 InterpreterRuntime::post_method_entry)); 1989 bind(L); 1990 } 1991 1992 { 1993 SkipIfEqual skip(this, &DTraceMethodProbes, false); 1994 NOT_LP64(get_thread(rthread);) 1995 get_method(rarg); 1996 call_VM_leaf(CAST_FROM_FN_PTR(address, SharedRuntime::dtrace_method_entry), 1997 rthread, rarg); 1998 } 1999 2000 // RedefineClasses() tracing support for obsolete method entry 2001 if (log_is_enabled(Trace, redefine, class, obsolete)) { 2002 NOT_LP64(get_thread(rthread);) 2003 get_method(rarg); 2004 call_VM_leaf( 2005 CAST_FROM_FN_PTR(address, SharedRuntime::rc_trace_method_entry), 2006 rthread, rarg); 2007 } 2008 } 2009 2010 2011 void InterpreterMacroAssembler::notify_method_exit( 2012 TosState state, NotifyMethodExitMode mode) { 2013 // Whenever JVMTI is interp_only_mode, method entry/exit events are sent to 2014 // track stack depth. If it is possible to enter interp_only_mode we add 2015 // the code to check if the event should be sent. 2016 Register rthread = LP64_ONLY(r15_thread) NOT_LP64(rcx); 2017 Register rarg = LP64_ONLY(c_rarg1) NOT_LP64(rbx); 2018 if (mode == NotifyJVMTI && JvmtiExport::can_post_interpreter_events()) { 2019 Label L; 2020 // Note: frame::interpreter_frame_result has a dependency on how the 2021 // method result is saved across the call to post_method_exit. If this 2022 // is changed then the interpreter_frame_result implementation will 2023 // need to be updated too. 2024 2025 // template interpreter will leave the result on the top of the stack. 2026 push(state); 2027 NOT_LP64(get_thread(rthread);) 2028 movl(rdx, Address(rthread, JavaThread::interp_only_mode_offset())); 2029 testl(rdx, rdx); 2030 jcc(Assembler::zero, L); 2031 call_VM(noreg, 2032 CAST_FROM_FN_PTR(address, InterpreterRuntime::post_method_exit)); 2033 bind(L); 2034 pop(state); 2035 } 2036 2037 { 2038 SkipIfEqual skip(this, &DTraceMethodProbes, false); 2039 push(state); 2040 NOT_LP64(get_thread(rthread);) 2041 get_method(rarg); 2042 call_VM_leaf(CAST_FROM_FN_PTR(address, SharedRuntime::dtrace_method_exit), 2043 rthread, rarg); 2044 pop(state); 2045 } 2046 }