1 #
   2 # Copyright (c) 2011, 2012, Oracle and/or its affiliates. All rights reserved.
   3 # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
   4 #
   5 # This code is free software; you can redistribute it and/or modify it
   6 # under the terms of the GNU General Public License version 2 only, as
   7 # published by the Free Software Foundation.  Oracle designates this
   8 # particular file as subject to the "Classpath" exception as provided
   9 # by Oracle in the LICENSE file that accompanied this code.
  10 #
  11 # This code is distributed in the hope that it will be useful, but WITHOUT
  12 # ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  13 # FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
  14 # version 2 for more details (a copy is included in the LICENSE file that
  15 # accompanied this code).
  16 #
  17 # You should have received a copy of the GNU General Public License version
  18 # 2 along with this work; if not, write to the Free Software Foundation,
  19 # Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
  20 #
  21 # Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
  22 # or visit www.oracle.com if you need additional information or have any
  23 # questions.
  24 #
  25 
  26 ### This is the main part of the Makefile, for the normal case with SPEC specifying a single existing spec.gmk file.
  27 
  28 # Now load the spec
  29 include $(SPEC)
  30 
  31 # Load the vital tools for all the makefiles. 
  32 include $(SRC_ROOT)/common/makefiles/MakeBase.gmk
  33 
  34 # Include the corresponding custom file, if present.
  35 -include $(CUSTOM_MAKE_DIR)/Main.gmk
  36 
  37 ### Clean up from previous run
  38 
  39 # Remove any build.log from a previous run, if they exist
  40 ifneq (,$(BUILD_LOG))
  41     ifneq (,$(BUILD_LOG_PREVIOUS))
  42         # Rotate old log
  43         $(shell $(RM) $(BUILD_LOG_PREVIOUS) 2> /dev/null)
  44         $(shell $(MV) $(BUILD_LOG) $(BUILD_LOG_PREVIOUS) 2> /dev/null)
  45     else
  46         $(shell $(RM) $(BUILD_LOG) 2> /dev/null)
  47     endif
  48     $(shell $(RM) $(OUTPUT_ROOT)/build-trace-time.log 2> /dev/null)
  49 endif
  50 # Remove any javac server logs and port files. This
  51 # prevents a new make run to reuse the previous servers.
  52 ifneq (,$(SJAVAC_SERVER_DIR))
  53     $(shell $(MKDIR) -p $(SJAVAC_SERVER_DIR) && $(RM) -rf $(SJAVAC_SERVER_DIR)/*)
  54 endif
  55 
  56 # Reset the build timers.
  57 $(eval $(call ResetAllTimers))
  58 
  59 # Setup number of jobs to use. -jN is unfortunately not available for us to parse from the command line,
  60 # hence this workaround.
  61 ifeq ($(JOBS),)
  62     JOBS=$(NUM_CORES)
  63 endif
  64 MAKE_ARGS:=$(MAKE_ARGS) -j$(JOBS)
  65 
  66 ### Main targets
  67 
  68 all: jdk
  69 
  70 start-make:
  71         @$(call AtMakeStart)
  72 
  73 langtools: langtools-only
  74 langtools-only: start-make
  75         @$(call TargetEnter)
  76         @($(CD) $(LANGTOOLS_TOPDIR)/makefiles && $(BUILD_LOG_WRAPPER) $(MAKE) $(MAKE_ARGS) -f BuildLangtools.gmk)
  77         @$(call TargetExit)
  78 
  79 corba: langtools corba-only
  80 corba-only: start-make
  81         @$(call TargetEnter)
  82         @($(CD) $(CORBA_TOPDIR)/makefiles && $(BUILD_LOG_WRAPPER) $(MAKE) $(MAKE_ARGS) -f BuildCorba.gmk)
  83         @$(call TargetExit)
  84 
  85 jaxp: langtools jaxp-only
  86 jaxp-only: start-make
  87         @$(call TargetEnter)
  88         @($(CD) $(JAXP_TOPDIR)/makefiles && $(BUILD_LOG_WRAPPER) $(MAKE) $(MAKE_ARGS) -f BuildJaxp.gmk)
  89         @$(call TargetExit)
  90 
  91 jaxws: langtools jaxp jaxws-only
  92 jaxws-only: start-make
  93         @$(call TargetEnter)
  94         @($(CD) $(JAXWS_TOPDIR)/makefiles && $(BUILD_LOG_WRAPPER) $(MAKE) $(MAKE_ARGS) -f BuildJaxws.gmk)
  95         @$(call TargetExit)
  96 
  97 ifeq ($(BUILD_HOTSPOT),true)
  98 hotspot: hotspot-only
  99 hotspot-only: start-make
 100         @$(call TargetEnter)
 101         @($(CD) $(SRC_ROOT)/common/makefiles && $(BUILD_LOG_WRAPPER) $(MAKE) $(MAKE_ARGS) -f HotspotWrapper.gmk)
 102         @$(call TargetExit)
 103 endif
 104 
 105 jdk: langtools hotspot corba jaxp jaxws jdk-only
 106 jdk-only: start-make
 107         @$(call TargetEnter)
 108         @($(CD) $(JDK_TOPDIR)/makefiles && $(BUILD_LOG_WRAPPER) $(MAKE) $(MAKE_ARGS) -f BuildJdk.gmk $(JDK_TARGET))
 109         @$(call TargetExit)
 110 
 111 demos: jdk demos-only
 112 demos-only: start-make
 113         @$(call TargetEnter)
 114         @($(CD) $(JDK_TOPDIR)/makefiles && $(BUILD_LOG_WRAPPER) $(MAKE) $(MAKE_ARGS) -f BuildJdk.gmk demos)
 115         @$(call TargetExit)
 116 
 117 images: source-tips demos images-only
 118 images-only: start-make
 119         @$(call TargetEnter)
 120         @($(CD) $(JDK_TOPDIR)/makefiles && $(BUILD_LOG_WRAPPER) $(MAKE) $(MAKE_ARGS) -f BuildJdk.gmk images)
 121         @$(call TargetExit)
 122 
 123 overlay-images: source-tips demos overlay-images-only
 124 overlay-images-only: start-make
 125         @$(call TargetEnter)
 126         @($(CD) $(JDK_TOPDIR)/makefiles && $(BUILD_LOG_WRAPPER) $(MAKE) $(MAKE_ARGS) -f BuildJdk.gmk overlay-images)
 127         @$(call TargetExit)
 128 
 129 bundles: images bundles-only
 130 bundles-only: start-make
 131         @$(call TargetEnter)
 132         @($(CD) $(JDK_TOPDIR)/makefiles && $(BUILD_LOG_WRAPPER) $(MAKE) $(MAKE_ARGS) -f BuildJdk.gmk bundles)
 133         @$(call TargetExit)
 134 
 135 install: images install-only
 136 install-only: start-make
 137         @$(call TargetEnter)
 138         @($(CD) $(JDK_TOPDIR)/makefiles && $(BUILD_LOG_WRAPPER) $(MAKE) $(MAKE_ARGS) -f BuildJdk.gmk install)
 139         @$(call TargetExit)
 140 
 141 docs: jdk docs-only
 142 docs-only: start-make
 143         @$(call TargetEnter)
 144         @($(CD) $(SRC_ROOT)/common/makefiles/javadoc && $(BUILD_LOG_WRAPPER) $(MAKE) $(MAKE_ARGS) -f Javadoc.gmk docs)
 145         @$(call TargetExit)
 146 
 147 bootcycle-images:
 148         @$(ECHO) Boot cycle build step 1: Building the JDK image normally
 149         @($(CD) $(SRC_ROOT)/common/makefiles && $(BUILD_LOG_WRAPPER) $(MAKE) SPEC=$(SPEC) images)
 150         @$(ECHO) Boot cycle build step 2: Building a new JDK image using previously built image
 151         @($(CD) $(SRC_ROOT)/common/makefiles && $(BUILD_LOG_WRAPPER) $(MAKE) SPEC=$(dir $(SPEC))bootcycle-spec.gmk images)
 152 
 153 test: start-make
 154         @$(call TargetEnter)
 155         @($(CD) $(SRC_ROOT)/test && $(BUILD_LOG_WRAPPER) $(MAKE) MAKEFLAGS= -j1 PRODUCT_HOME=$(OUTPUT_ROOT)/jdk JPRT_JAVA_HOME=$(OUTPUT_ROOT)/jdk ALT_OUTPUTDIR=$(OUTPUT_ROOT) $(TEST)) || true
 156         @$(call TargetExit)
 157 
 158 # Stores the tips for each repository. This file is be used when constructing the jdk image and can be
 159 # used to track the exact sources used to build that image.
 160 source-tips: $(OUTPUT_ROOT)/source_tips
 161 $(OUTPUT_ROOT)/source_tips: FRC
 162         @$(MKDIR) -p $(@D)
 163         @$(RM) $@
 164         @$(if $(HG),$(call GetSourceTips),$(ECHO) "hg not installed" > $@)
 165 
 166 
 167 # Remove everything, except the output from configure.
 168 clean: clean-langtools clean-corba clean-jaxp clean-jaxws clean-hotspot clean-jdk clean-images clean-overlay-images clean-bootcycle-build clean-docs
 169         @($(CD) $(OUTPUT_ROOT) && $(RM) -r tmp source_tips build.log* build-trace*.log*)
 170         @$(ECHO) Cleaned all build artifacts.
 171 
 172 # Remove everything, including configure configuration.
 173 # If the output directory was created by configure and now becomes empty, remove it as well.
 174 # FIXME: tmp should not be here, fix ResetTimers instead. And remove spec.sh!
 175 dist-clean: clean
 176         @($(CD) $(OUTPUT_ROOT) && $(RM) -r *spec.gmk config.* configure-arguments Makefile compare.sh spec.sh tmp)
 177         @$(if $(filter $(CONF_NAME),$(notdir $(OUTPUT_ROOT))), \
 178     if test "x`$(LS) $(OUTPUT_ROOT)`" != x; then \
 179         $(ECHO) "Warning: Not removing non-empty configuration directory for '$(CONF_NAME)'" ;\
 180     else \
 181         ($(CD) $(SRC_ROOT) && $(ECHO) "Removing configuration directory for '$(CONF_NAME)'" && $(RM) -r $(OUTPUT_ROOT)) \
 182     fi \
 183   )
 184         @$(ECHO) Cleaned everything, you will have to re-run configure.
 185 
 186 clean-langtools:
 187         $(call CleanComponent,langtools)
 188 clean-corba:
 189         $(call CleanComponent,corba)
 190 clean-jaxp:
 191         $(call CleanComponent,jaxp)
 192 clean-jaxws:
 193         $(call CleanComponent,jaxws)
 194 clean-hotspot:
 195         $(call CleanComponent,hotspot)
 196 clean-jdk:
 197         $(call CleanComponent,jdk)
 198 clean-images:
 199         $(call CleanComponent,images)
 200 clean-overlay-images:
 201         $(call CleanComponent,overlay-images)
 202 clean-bootcycle-build:
 203         $(call CleanComponent,bootcycle-build)
 204 clean-docs:
 205         $(call CleanComponent,docs)
 206         $(call CleanComponent,docstemp)
 207 
 208 .PHONY: langtools corba jaxp jaxws hotspot jdk images overlay-images install
 209 .PHONY: langtools-only corba-only jaxp-only jaxws-only hotspot-only jdk-only images-only overlay-images-only install-only
 210 .PHONY: all test clean dist-clean bootcycle-images start-make
 211 .PHONY: clean-langtools clean-corba clean-jaxp clean-jaxws clean-hotspot clean-jdk clean-images clean-overlay-images clean-bootcycle-build
 212 
 213 FRC: # Force target