< prev index next >
make/devkit/createSolarisDevkit12.6.sh
Print this page
@@ -1,8 +1,8 @@
#!/bin/bash
#
-# Copyright (c) 2015, Oracle and/or its affiliates. All rights reserved.
+# Copyright (c) 2015, 2018, Oracle and/or its affiliates. All rights reserved.
# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
#
# This code is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License version 2 only, as
# published by the Free Software Foundation. Oracle designates this
@@ -27,35 +27,40 @@
# This script creates a devkit for building OpenJDK on Solaris by copying
# part of a Solaris Studio installation and cretaing a sysroot by installing
# a limited set of system packages. It is assumed that a suitable pkg
# publisher is configured for the system where the script is executed.
#
+# Note that you will need to be able to sudo to root to run the pkg install
+# part of this script. It should not affect the running system, but only
+# install in a separate temporary image.
+#
# The Solaris Studio installation must contain at least these packages:
-# developer/solarisstudio-124/backend 12.4-1.0.6.0 i--
-# developer/solarisstudio-124/c++ 12.4-1.0.10.0 i--
-# developer/solarisstudio-124/cc 12.4-1.0.4.0 i--
-# developer/solarisstudio-124/library/c++-libs 12.4-1.0.10.0 i--
-# developer/solarisstudio-124/library/math-libs 12.4-1.0.0.1 i--
-# developer/solarisstudio-124/library/studio-gccrt 12.4-1.0.0.1 i--
-# developer/solarisstudio-124/studio-common 12.4-1.0.0.1 i--
-# developer/solarisstudio-124/studio-ja 12.4-1.0.0.1 i--
-# developer/solarisstudio-124/studio-legal 12.4-1.0.0.1 i--
-# developer/solarisstudio-124/studio-zhCN 12.4-1.0.0.1 i--
-# In particular backend 12.4-1.0.6.0 contains a critical patch for the sparc
-# version.
+# developer/developerstudio-126/backend 12.6-1.0.0.0 i--
+# developer/developerstudio-126/c++ 12.6-1.0.0.0 i--
+# developer/developerstudio-126/cc 12.6-1.0.0.0 i--
+# developer/developerstudio-126/dbx (solarisstudio) 12.6-1.0.0.0 i--
+# developer/developerstudio-126/library/c++-libs 12.6-1.0.0.0 i--
+# developer/developerstudio-126/library/math-libs 12.6-1.0.0.0 i--
+# developer/developerstudio-126/library/c-libs 12.6-1.0.0.0 i--
+# developer/developerstudio-126/library/studio-gccrt 12.6-1.0.0.0 i--
+# developer/developerstudio-126/studio-common 12.6-1.0.0.0 i--
+# developer/developerstudio-126/studio-ja 12.6-1.0.0.0 i--
+# developer/developerstudio-126/studio-legal 12.6-1.0.0.0 i--
+# developer/developerstudio-126/studio-zhCN 12.6-1.0.0.0 i--
#
# erik.joelsson@oracle.com
-USAGE="$0 <Solaris Studio installation> <Path to gnu make binary>"
+USAGE="$0 <Solaris Studio installation>"
-if [ "$1" = "" ] || [ "$2" = "" ]; then
+if [ "$1" = "" ]; then
echo $USAGE
exit 1
fi
-SOLARIS_STUDIO_VERSION=12u4
-SOLARIS_VERSION=11u1
+SOLARIS_STUDIO_VERSION=12u6
+SOLARIS_VERSION=11u3
+SOLARIS_ENTIRE_VERSION=0.5.11-0.175.3.20.0.6.0
case `uname -p` in
i*)
ARCH=x86
;;
sparc*)
@@ -62,21 +67,19 @@
ARCH=sparc
;;
esac
SOLARIS_STUDIO_SRC=$1
-GNU_MAKE=$2
SCRIPT_DIR="$(cd "$(dirname $0)" > /dev/null && pwd)"
BUILD_DIR="${SCRIPT_DIR}/../../build/devkit"
DEVKIT_NAME=SS${SOLARIS_STUDIO_VERSION}-Solaris${SOLARIS_VERSION}
DEVKIT_ROOT=${BUILD_DIR}/${DEVKIT_NAME}
BUNDLE_NAME=${DEVKIT_NAME}.tar.gz
BUNDLE=${BUILD_DIR}/${BUNDLE_NAME}
INSTALL_ROOT=${BUILD_DIR}/install-root-$SOLARIS_VERSION
-INSTALL_ROOT_TOOLS=${BUILD_DIR}/install-root-tools-$SOLARIS_VERSION
SYSROOT=${DEVKIT_ROOT}/sysroot
SOLARIS_STUDIO_SUBDIR=SS${SOLARIS_STUDIO_VERSION}
SOLARIS_STUDIO_DIR=${DEVKIT_ROOT}/${SOLARIS_STUDIO_SUBDIR}
# Extract the publisher from the system
@@ -86,31 +89,17 @@
if [ ! -d $INSTALL_ROOT ]; then
echo "Creating $INSTALL_ROOT and installing packages"
pkg image-create $INSTALL_ROOT
pkg -R $INSTALL_ROOT set-publisher -P -g ${PUBLISHER_URI} solaris
- pkg -R $INSTALL_ROOT install --accept $(cat solaris11.1-package-list.txt)
+ sudo pkg -R $INSTALL_ROOT install --accept entire@$SOLARIS_ENTIRE_VERSION \
+ system/install developer/gnu-binutils system/library/mmheap system/picl \
+ developer/assembler
else
echo "Skipping installing packages"
fi
-# Since we have implicitly been running 11.2 tools for a long time, we need
-# to pick them for the tools dir in the devkit. Create a separate install-root
-# for it.
-if [ ! -d $INSTALL_ROOT_TOOLS ]; then
- echo "Creating $INSTALL_ROOT_TOOLS and installing packages"
- pkg image-create $INSTALL_ROOT_TOOLS
- pkg -R $INSTALL_ROOT_TOOLS set-publisher -P -g ${PUBLISHER_URI} solaris
- sudo pkg -R $INSTALL_ROOT_TOOLS install --accept \
- entire@0.5.11-0.175.2.5.0.5.0 \
- system/linker \
- developer/base-developer-utilities \
- developer/gnu-binutils
-else
- echo "Skipping installing tools packages"
-fi
-
if [ ! -d $SYSROOT ]; then
echo "Copying from $INSTALL_ROOT to $SYSROOT"
mkdir -p $SYSROOT
cp -rH $INSTALL_ROOT/lib $SYSROOT/
mkdir $SYSROOT/usr
@@ -120,26 +109,20 @@
else
echo "Skipping copying to $SYSROOT"
fi
if [ ! -d $DEVKIT_ROOT/tools ]; then
- echo "Copying from $INSTALL_ROOT_TOOLS to $DEVKIT_ROOT/tools"
# Some of the tools in sysroot are needed in the OpenJDK build. We need
# to copy them into a tools dir, including their specific libraries.
- mkdir -p $DEVKIT_ROOT/tools/usr/bin/sparcv9 $DEVKIT_ROOT/tools/lib/sparcv9 \
- $DEVKIT_ROOT/tools/usr/gnu/bin
- cp $INSTALL_ROOT_TOOLS/usr/bin/{ar,nm,strip,ld,ldd} \
+ mkdir -p $DEVKIT_ROOT/tools/usr/bin $DEVKIT_ROOT/tools/lib/sparcv9 \
+ $DEVKIT_ROOT/tools/usr/gnu/bin $DEVKIT_ROOT/tools/usr/bin/sparcv9
+ cp $INSTALL_ROOT/usr/bin/{as,ar,nm,strip,ld,pigz,ldd} \
$DEVKIT_ROOT/tools/usr/bin/
- cp $INSTALL_ROOT_TOOLS/usr/bin/sparcv9/{ar,nm,strip,ld,ldd} \
- $DEVKIT_ROOT/tools/usr/bin/sparcv9/
- cp $INSTALL_ROOT_TOOLS/usr/sbin/dtrace $DEVKIT_ROOT/tools/usr/bin/
- cp $INSTALL_ROOT_TOOLS/usr/sbin/sparcv9/dtrace $DEVKIT_ROOT/tools/usr/bin/sparcv9/
- cp -rH $INSTALL_ROOT_TOOLS/usr/gnu/bin/* $DEVKIT_ROOT/tools/usr/gnu/bin/
- cp $INSTALL_ROOT_TOOLS/lib/{libelf.so*,libld.so*,liblddbg.so*} \
- $DEVKIT_ROOT/tools/lib/
- cp $INSTALL_ROOT_TOOLS/lib/sparcv9/{libelf.so*,libld.so*,liblddbg.so*} \
- $DEVKIT_ROOT/tools/lib/sparcv9/
+ cp $INSTALL_ROOT/usr/sbin/dtrace $DEVKIT_ROOT/tools/usr/bin/
+ cp $INSTALL_ROOT/usr/sbin/sparcv9/dtrace $DEVKIT_ROOT/tools/usr/bin/sparcv9/
+ cp -rH $INSTALL_ROOT/usr/gnu/bin/* $DEVKIT_ROOT/tools/usr/gnu/bin/
+ cp $INSTALL_ROOT/lib/sparcv9/{libelf.so*,libld.so*,liblddbg.so*} $DEVKIT_ROOT/tools/lib/sparcv9/
for t in $(ls $DEVKIT_ROOT/tools/usr/gnu/bin); do
if [ -f $DEVKIT_ROOT/tools/usr/gnu/bin/$t ]; then
ln -s ../gnu/bin/$t $DEVKIT_ROOT/tools/usr/bin/g$t
fi
done
@@ -149,24 +132,21 @@
if [ ! -d $SOLARIS_STUDIO_DIR ]; then
echo "Copying Solaris Studio from $SOLARIS_STUDIO_SRC"
mkdir -p ${SOLARIS_STUDIO_DIR}
cp -rH $SOLARIS_STUDIO_SRC/. ${SOLARIS_STUDIO_DIR}/
- # Solaris Studio 12.4 requires /lib/libmmheap.so.1 to run, but this lib is not
- # installed by default on all Solaris systems. Sneak it in from the sysroot to
- # make it run OOTB on more systems.
+ # Solaris Studio 12.6 requires libmmheap.so.1 and libsunmath.so.1 to run, but
+ # these libs are not installed by default on all Solaris systems.
+ # Sneak them in from the sysroot to make it run OOTB on more systems.
+ cp $SYSROOT/lib/libsunmath.so.1 $SOLARIS_STUDIO_DIR/lib/compilers/sys/
+ cp $SYSROOT/lib/sparcv9/libsunmath.so.1 $SOLARIS_STUDIO_DIR/lib/compilers/sys/sparcv9/
cp $SYSROOT/lib/libmmheap.so.1 $SOLARIS_STUDIO_DIR/lib/compilers/sys/
+ cp $SYSROOT/lib/sparcv9/libmmheap.so.1 $SOLARIS_STUDIO_DIR/lib/compilers/sys/sparcv9/
else
echo "Skipping copying of Solaris Studio"
fi
-echo "Copying gnu make to $DEVKIT_ROOT/bin"
-cp $GNU_MAKE $DEVKIT_ROOT/tools/usr/bin/
-if [ ! -e $DEVKIT_ROOT/tools/usr/bin/gmake ]; then
- ln -s make $DEVKIT_ROOT/tools/usr/bin/gmake
-fi
-
# Create the devkit.info file
echo Creating devkit.info
INFO_FILE=$DEVKIT_ROOT/devkit.info
rm -f $INFO_FILE
echo "# This file describes to configure how to interpret the contents of this devkit" >> $INFO_FILE
@@ -174,11 +154,14 @@
echo "DEVKIT_TOOLCHAIN_PATH=\"\$DEVKIT_ROOT/$SOLARIS_STUDIO_SUBDIR/bin:\$DEVKIT_ROOT/bin\"" >> $INFO_FILE
echo "DEVKIT_EXTRA_PATH=\"\$DEVKIT_ROOT/tools/usr/bin\"" >> $INFO_FILE
echo "DEVKIT_SYSROOT=\"\$DEVKIT_ROOT/sysroot\"" >> $INFO_FILE
if [ ! -e $BUNDLE ]; then
+ GZIP=$(command -v pigz)
+ if [ -z "$GZIP" ]; then
+ GZIP="gzip"
+ fi
echo "Creating $BUNDLE from $DEVKIT_ROOT"
- cd $DEVKIT_ROOT/..
- tar zcf $BUNDLE $DEVKIT_NAME
+ (cd $DEVKIT_ROOT && tar cf - . | $GZIP - > "$BUNDLE")
else
echo "Skipping creation of $BUNDLE"
fi
< prev index next >