--- old/common/autoconf/autogen.sh 2012-07-03 20:04:01.577810905 +0200 +++ new/common/autoconf/autogen.sh 2012-07-03 20:04:01.487809572 +0200 @@ -22,5 +22,19 @@ # questions. # -autoconf -W all configure.ac > configure -rm -rf config.status config.log autom4te.cache +script_dir=`dirname $0` +closed_script_dir="$script_dir/../../jdk/make/closed/autoconf" + +# Create a timestamp as seconds since epoch +TIMESTAMP=`date +%s` + +cat $script_dir/configure.ac | sed -e "s|@DATE_WHEN_GENERATED@|$TIMESTAMP|" | autoconf -W all -I$script_dir - > $script_dir/generated-configure.sh +rm -rf autom4te.cache + +if test -e $closed_script_dir/closed-hook.m4; then + # We have closed sources available; also generate configure script + # with closed hooks compiled in. + cat $script_dir/configure.ac | sed -e "s|@DATE_WHEN_GENERATED@|$TIMESTAMP|" | \ + sed -e "s|AC_DEFUN_ONCE(\[CLOSED_HOOK\])|m4_include([$closed_script_dir/closed-hook.m4])|" | autoconf -W all -I$script_dir - > $closed_script_dir/generated-configure.sh + rm -rf autom4te.cache +fi --- old/common/autoconf/build-aux/config.guess 2012-07-03 20:04:01.947816354 +0200 +++ new/common/autoconf/build-aux/config.guess 2012-07-03 20:04:01.857815020 +0200 @@ -1,1531 +1,38 @@ -#! /bin/sh -# Attempt to guess a canonical system name. -# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, -# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 -# Free Software Foundation, Inc. - -timestamp='2008-01-23' - -# This file is free software; you can redistribute it and/or modify it -# under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. +#!/bin/sh # -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. +# Copyright (c) 2012, Oracle and/or its affiliates. All rights reserved. +# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. # -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA -# 02110-1301, USA. +# This code is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License version 2 only, as +# published by the Free Software Foundation. # -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - - -# Originally written by Per Bothner . -# Please send patches to . Submit a context -# diff and a properly formatted ChangeLog entry. +# This code is distributed in the hope that it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License +# version 2 for more details (a copy is included in the LICENSE file that +# accompanied this code). # -# This script attempts to guess a canonical system name similar to -# config.sub. If it succeeds, it prints the system name on stdout, and -# exits with 0. Otherwise, it exits with 1. +# You should have received a copy of the GNU General Public License version +# 2 along with this work; if not, write to the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. +# +# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA +# or visit www.oracle.com if you need additional information or have any +# questions. # -# The plan is that this can be called by configure scripts if you -# don't specify an explicit build system type. - -me=`echo "$0" | sed -e 's,.*/,,'` - -usage="\ -Usage: $0 [OPTION] - -Output the configuration name of the system \`$me' is run on. - -Operation modes: - -h, --help print this help, then exit - -t, --time-stamp print date of last modification, then exit - -v, --version print version number, then exit - -Report bugs and patches to ." - -version="\ -GNU config.guess ($timestamp) - -Originally written by Per Bothner. -Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, -2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. - -This is free software; see the source for copying conditions. There is NO -warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." - -help=" -Try \`$me --help' for more information." - -# Parse command line -while test $# -gt 0 ; do - case $1 in - --time-stamp | --time* | -t ) - echo "$timestamp" ; exit ;; - --version | -v ) - echo "$version" ; exit ;; - --help | --h* | -h ) - echo "$usage"; exit ;; - -- ) # Stop option processing - shift; break ;; - - ) # Use stdin as input. - break ;; - -* ) - echo "$me: invalid option $1$help" >&2 - exit 1 ;; - * ) - break ;; - esac -done - -if test $# != 0; then - echo "$me: too many arguments$help" >&2 - exit 1 -fi - -trap 'exit 1' 1 2 15 - -# CC_FOR_BUILD -- compiler used by this script. Note that the use of a -# compiler to aid in system detection is discouraged as it requires -# temporary files to be created and, as you can see below, it is a -# headache to deal with in a portable fashion. - -# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still -# use `HOST_CC' if defined, but it is deprecated. - -# Portable tmp directory creation inspired by the Autoconf team. - -set_cc_for_build=' -trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; -trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; -: ${TMPDIR=/tmp} ; - { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || - { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || - { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || - { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; -dummy=$tmp/dummy ; -tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ; -case $CC_FOR_BUILD,$HOST_CC,$CC in - ,,) echo "int x;" > $dummy.c ; - for c in cc gcc c89 c99 ; do - if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then - CC_FOR_BUILD="$c"; break ; - fi ; - done ; - if test x"$CC_FOR_BUILD" = x ; then - CC_FOR_BUILD=no_compiler_found ; - fi - ;; - ,,*) CC_FOR_BUILD=$CC ;; - ,*,*) CC_FOR_BUILD=$HOST_CC ;; -esac ; set_cc_for_build= ;' - -# This is needed to find uname on a Pyramid OSx when run in the BSD universe. -# (ghazi@noc.rutgers.edu 1994-08-24) -if (test -f /.attbin/uname) >/dev/null 2>&1 ; then - PATH=$PATH:/.attbin ; export PATH -fi - -UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown -UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown -UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown -UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown - -# Note: order is significant - the case branches are not exclusive. - -case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in - *:NetBSD:*:*) - # NetBSD (nbsd) targets should (where applicable) match one or - # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*, - # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently - # switched to ELF, *-*-netbsd* would select the old - # object file format. This provides both forward - # compatibility and a consistent mechanism for selecting the - # object file format. - # - # Note: NetBSD doesn't particularly care about the vendor - # portion of the name. We always set it to "unknown". - sysctl="sysctl -n hw.machine_arch" - UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \ - /usr/sbin/$sysctl 2>/dev/null || echo unknown)` - case "${UNAME_MACHINE_ARCH}" in - armeb) machine=armeb-unknown ;; - arm*) machine=arm-unknown ;; - sh3el) machine=shl-unknown ;; - sh3eb) machine=sh-unknown ;; - sh5el) machine=sh5le-unknown ;; - *) machine=${UNAME_MACHINE_ARCH}-unknown ;; - esac - # The Operating System including object format, if it has switched - # to ELF recently, or will in the future. - case "${UNAME_MACHINE_ARCH}" in - arm*|i386|m68k|ns32k|sh3*|sparc|vax) - eval $set_cc_for_build - if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ - | grep __ELF__ >/dev/null - then - # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). - # Return netbsd for either. FIX? - os=netbsd - else - os=netbsdelf - fi - ;; - *) - os=netbsd - ;; - esac - # The OS release - # Debian GNU/NetBSD machines have a different userland, and - # thus, need a distinct triplet. However, they do not need - # kernel version information, so it can be replaced with a - # suitable tag, in the style of linux-gnu. - case "${UNAME_VERSION}" in - Debian*) - release='-gnu' - ;; - *) - release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` - ;; - esac - # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: - # contains redundant information, the shorter form: - # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. - echo "${machine}-${os}${release}" - exit ;; - *:OpenBSD:*:*) - UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` - echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE} - exit ;; - *:ekkoBSD:*:*) - echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE} - exit ;; - *:SolidBSD:*:*) - echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE} - exit ;; - macppc:MirBSD:*:*) - echo powerpc-unknown-mirbsd${UNAME_RELEASE} - exit ;; - *:MirBSD:*:*) - echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE} - exit ;; - alpha:OSF1:*:*) - case $UNAME_RELEASE in - *4.0) - UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` - ;; - *5.*) - UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` - ;; - esac - # According to Compaq, /usr/sbin/psrinfo has been available on - # OSF/1 and Tru64 systems produced since 1995. I hope that - # covers most systems running today. This code pipes the CPU - # types through head -n 1, so we only detect the type of CPU 0. - ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` - case "$ALPHA_CPU_TYPE" in - "EV4 (21064)") - UNAME_MACHINE="alpha" ;; - "EV4.5 (21064)") - UNAME_MACHINE="alpha" ;; - "LCA4 (21066/21068)") - UNAME_MACHINE="alpha" ;; - "EV5 (21164)") - UNAME_MACHINE="alphaev5" ;; - "EV5.6 (21164A)") - UNAME_MACHINE="alphaev56" ;; - "EV5.6 (21164PC)") - UNAME_MACHINE="alphapca56" ;; - "EV5.7 (21164PC)") - UNAME_MACHINE="alphapca57" ;; - "EV6 (21264)") - UNAME_MACHINE="alphaev6" ;; - "EV6.7 (21264A)") - UNAME_MACHINE="alphaev67" ;; - "EV6.8CB (21264C)") - UNAME_MACHINE="alphaev68" ;; - "EV6.8AL (21264B)") - UNAME_MACHINE="alphaev68" ;; - "EV6.8CX (21264D)") - UNAME_MACHINE="alphaev68" ;; - "EV6.9A (21264/EV69A)") - UNAME_MACHINE="alphaev69" ;; - "EV7 (21364)") - UNAME_MACHINE="alphaev7" ;; - "EV7.9 (21364A)") - UNAME_MACHINE="alphaev79" ;; - esac - # A Pn.n version is a patched version. - # A Vn.n version is a released version. - # A Tn.n version is a released field test version. - # A Xn.n version is an unreleased experimental baselevel. - # 1.2 uses "1.2" for uname -r. - echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` - exit ;; - Alpha\ *:Windows_NT*:*) - # How do we know it's Interix rather than the generic POSIX subsystem? - # Should we change UNAME_MACHINE based on the output of uname instead - # of the specific Alpha model? - echo alpha-pc-interix - exit ;; - 21064:Windows_NT:50:3) - echo alpha-dec-winnt3.5 - exit ;; - Amiga*:UNIX_System_V:4.0:*) - echo m68k-unknown-sysv4 - exit ;; - *:[Aa]miga[Oo][Ss]:*:*) - echo ${UNAME_MACHINE}-unknown-amigaos - exit ;; - *:[Mm]orph[Oo][Ss]:*:*) - echo ${UNAME_MACHINE}-unknown-morphos - exit ;; - *:OS/390:*:*) - echo i370-ibm-openedition - exit ;; - *:z/VM:*:*) - echo s390-ibm-zvmoe - exit ;; - *:OS400:*:*) - echo powerpc-ibm-os400 - exit ;; - arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) - echo arm-acorn-riscix${UNAME_RELEASE} - exit ;; - arm:riscos:*:*|arm:RISCOS:*:*) - echo arm-unknown-riscos - exit ;; - SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) - echo hppa1.1-hitachi-hiuxmpp - exit ;; - Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) - # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. - if test "`(/bin/universe) 2>/dev/null`" = att ; then - echo pyramid-pyramid-sysv3 - else - echo pyramid-pyramid-bsd - fi - exit ;; - NILE*:*:*:dcosx) - echo pyramid-pyramid-svr4 - exit ;; - DRS?6000:unix:4.0:6*) - echo sparc-icl-nx6 - exit ;; - DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) - case `/usr/bin/uname -p` in - sparc) echo sparc-icl-nx7; exit ;; - esac ;; - sun4H:SunOS:5.*:*) - echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) - echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*) - echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - sun4*:SunOS:6*:*) - # According to config.sub, this is the proper way to canonicalize - # SunOS6. Hard to guess exactly what SunOS6 will be like, but - # it's likely to be more like Solaris than SunOS4. - echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - sun4*:SunOS:*:*) - case "`/usr/bin/arch -k`" in - Series*|S4*) - UNAME_RELEASE=`uname -v` - ;; - esac - # Japanese Language versions have a version number like `4.1.3-JL'. - echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` - exit ;; - sun3*:SunOS:*:*) - echo m68k-sun-sunos${UNAME_RELEASE} - exit ;; - sun*:*:4.2BSD:*) - UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` - test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 - case "`/bin/arch`" in - sun3) - echo m68k-sun-sunos${UNAME_RELEASE} - ;; - sun4) - echo sparc-sun-sunos${UNAME_RELEASE} - ;; - esac - exit ;; - aushp:SunOS:*:*) - echo sparc-auspex-sunos${UNAME_RELEASE} - exit ;; - # The situation for MiNT is a little confusing. The machine name - # can be virtually everything (everything which is not - # "atarist" or "atariste" at least should have a processor - # > m68000). The system name ranges from "MiNT" over "FreeMiNT" - # to the lowercase version "mint" (or "freemint"). Finally - # the system name "TOS" denotes a system which is actually not - # MiNT. But MiNT is downward compatible to TOS, so this should - # be no problem. - atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} - exit ;; - atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} - exit ;; - *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} - exit ;; - milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) - echo m68k-milan-mint${UNAME_RELEASE} - exit ;; - hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) - echo m68k-hades-mint${UNAME_RELEASE} - exit ;; - *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) - echo m68k-unknown-mint${UNAME_RELEASE} - exit ;; - m68k:machten:*:*) - echo m68k-apple-machten${UNAME_RELEASE} - exit ;; - powerpc:machten:*:*) - echo powerpc-apple-machten${UNAME_RELEASE} - exit ;; - RISC*:Mach:*:*) - echo mips-dec-mach_bsd4.3 - exit ;; - RISC*:ULTRIX:*:*) - echo mips-dec-ultrix${UNAME_RELEASE} - exit ;; - VAX*:ULTRIX*:*:*) - echo vax-dec-ultrix${UNAME_RELEASE} - exit ;; - 2020:CLIX:*:* | 2430:CLIX:*:*) - echo clipper-intergraph-clix${UNAME_RELEASE} - exit ;; - mips:*:*:UMIPS | mips:*:*:RISCos) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c -#ifdef __cplusplus -#include /* for printf() prototype */ - int main (int argc, char *argv[]) { -#else - int main (argc, argv) int argc; char *argv[]; { -#endif - #if defined (host_mips) && defined (MIPSEB) - #if defined (SYSTYPE_SYSV) - printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); - #endif - #if defined (SYSTYPE_SVR4) - printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); - #endif - #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) - printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); - #endif - #endif - exit (-1); - } -EOF - $CC_FOR_BUILD -o $dummy $dummy.c && - dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` && - SYSTEM_NAME=`$dummy $dummyarg` && - { echo "$SYSTEM_NAME"; exit; } - echo mips-mips-riscos${UNAME_RELEASE} - exit ;; - Motorola:PowerMAX_OS:*:*) - echo powerpc-motorola-powermax - exit ;; - Motorola:*:4.3:PL8-*) - echo powerpc-harris-powermax - exit ;; - Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) - echo powerpc-harris-powermax - exit ;; - Night_Hawk:Power_UNIX:*:*) - echo powerpc-harris-powerunix - exit ;; - m88k:CX/UX:7*:*) - echo m88k-harris-cxux7 - exit ;; - m88k:*:4*:R4*) - echo m88k-motorola-sysv4 - exit ;; - m88k:*:3*:R3*) - echo m88k-motorola-sysv3 - exit ;; - AViiON:dgux:*:*) - # DG/UX returns AViiON for all architectures - UNAME_PROCESSOR=`/usr/bin/uname -p` - if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] - then - if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ - [ ${TARGET_BINARY_INTERFACE}x = x ] - then - echo m88k-dg-dgux${UNAME_RELEASE} - else - echo m88k-dg-dguxbcs${UNAME_RELEASE} - fi - else - echo i586-dg-dgux${UNAME_RELEASE} - fi - exit ;; - M88*:DolphinOS:*:*) # DolphinOS (SVR3) - echo m88k-dolphin-sysv3 - exit ;; - M88*:*:R3*:*) - # Delta 88k system running SVR3 - echo m88k-motorola-sysv3 - exit ;; - XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) - echo m88k-tektronix-sysv3 - exit ;; - Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) - echo m68k-tektronix-bsd - exit ;; - *:IRIX*:*:*) - echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` - exit ;; - ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. - echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id - exit ;; # Note that: echo "'`uname -s`'" gives 'AIX ' - i*86:AIX:*:*) - echo i386-ibm-aix - exit ;; - ia64:AIX:*:*) - if [ -x /usr/bin/oslevel ] ; then - IBM_REV=`/usr/bin/oslevel` - else - IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} - fi - echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} - exit ;; - *:AIX:2:3) - if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #include - - main() - { - if (!__power_pc()) - exit(1); - puts("powerpc-ibm-aix3.2.5"); - exit(0); - } -EOF - if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` - then - echo "$SYSTEM_NAME" - else - echo rs6000-ibm-aix3.2.5 - fi - elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then - echo rs6000-ibm-aix3.2.4 - else - echo rs6000-ibm-aix3.2 - fi - exit ;; - *:AIX:*:[456]) - IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` - if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then - IBM_ARCH=rs6000 - else - IBM_ARCH=powerpc - fi - if [ -x /usr/bin/oslevel ] ; then - IBM_REV=`/usr/bin/oslevel` - else - IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} - fi - echo ${IBM_ARCH}-ibm-aix${IBM_REV} - exit ;; - *:AIX:*:*) - echo rs6000-ibm-aix - exit ;; - ibmrt:4.4BSD:*|romp-ibm:BSD:*) - echo romp-ibm-bsd4.4 - exit ;; - ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and - echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to - exit ;; # report: romp-ibm BSD 4.3 - *:BOSX:*:*) - echo rs6000-bull-bosx - exit ;; - DPX/2?00:B.O.S.:*:*) - echo m68k-bull-sysv3 - exit ;; - 9000/[34]??:4.3bsd:1.*:*) - echo m68k-hp-bsd - exit ;; - hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) - echo m68k-hp-bsd4.4 - exit ;; - 9000/[34678]??:HP-UX:*:*) - HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` - case "${UNAME_MACHINE}" in - 9000/31? ) HP_ARCH=m68000 ;; - 9000/[34]?? ) HP_ARCH=m68k ;; - 9000/[678][0-9][0-9]) - if [ -x /usr/bin/getconf ]; then - sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` - sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` - case "${sc_cpu_version}" in - 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 - 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 - 532) # CPU_PA_RISC2_0 - case "${sc_kernel_bits}" in - 32) HP_ARCH="hppa2.0n" ;; - 64) HP_ARCH="hppa2.0w" ;; - '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 - esac ;; - esac - fi - if [ "${HP_ARCH}" = "" ]; then - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - - #define _HPUX_SOURCE - #include - #include - - int main () - { - #if defined(_SC_KERNEL_BITS) - long bits = sysconf(_SC_KERNEL_BITS); - #endif - long cpu = sysconf (_SC_CPU_VERSION); - - switch (cpu) - { - case CPU_PA_RISC1_0: puts ("hppa1.0"); break; - case CPU_PA_RISC1_1: puts ("hppa1.1"); break; - case CPU_PA_RISC2_0: - #if defined(_SC_KERNEL_BITS) - switch (bits) - { - case 64: puts ("hppa2.0w"); break; - case 32: puts ("hppa2.0n"); break; - default: puts ("hppa2.0"); break; - } break; - #else /* !defined(_SC_KERNEL_BITS) */ - puts ("hppa2.0"); break; - #endif - default: puts ("hppa1.0"); break; - } - exit (0); - } -EOF - (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` - test -z "$HP_ARCH" && HP_ARCH=hppa - fi ;; - esac - if [ ${HP_ARCH} = "hppa2.0w" ] - then - eval $set_cc_for_build - - # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating - # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler - # generating 64-bit code. GNU and HP use different nomenclature: - # - # $ CC_FOR_BUILD=cc ./config.guess - # => hppa2.0w-hp-hpux11.23 - # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess - # => hppa64-hp-hpux11.23 - - if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | - grep __LP64__ >/dev/null - then - HP_ARCH="hppa2.0w" - else - HP_ARCH="hppa64" - fi - fi - echo ${HP_ARCH}-hp-hpux${HPUX_REV} - exit ;; - ia64:HP-UX:*:*) - HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` - echo ia64-hp-hpux${HPUX_REV} - exit ;; - 3050*:HI-UX:*:*) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #include - int - main () - { - long cpu = sysconf (_SC_CPU_VERSION); - /* The order matters, because CPU_IS_HP_MC68K erroneously returns - true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct - results, however. */ - if (CPU_IS_PA_RISC (cpu)) - { - switch (cpu) - { - case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; - case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; - case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; - default: puts ("hppa-hitachi-hiuxwe2"); break; - } - } - else if (CPU_IS_HP_MC68K (cpu)) - puts ("m68k-hitachi-hiuxwe2"); - else puts ("unknown-hitachi-hiuxwe2"); - exit (0); - } -EOF - $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` && - { echo "$SYSTEM_NAME"; exit; } - echo unknown-hitachi-hiuxwe2 - exit ;; - 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) - echo hppa1.1-hp-bsd - exit ;; - 9000/8??:4.3bsd:*:*) - echo hppa1.0-hp-bsd - exit ;; - *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) - echo hppa1.0-hp-mpeix - exit ;; - hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) - echo hppa1.1-hp-osf - exit ;; - hp8??:OSF1:*:*) - echo hppa1.0-hp-osf - exit ;; - i*86:OSF1:*:*) - if [ -x /usr/sbin/sysversion ] ; then - echo ${UNAME_MACHINE}-unknown-osf1mk - else - echo ${UNAME_MACHINE}-unknown-osf1 - fi - exit ;; - parisc*:Lites*:*:*) - echo hppa1.1-hp-lites - exit ;; - C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) - echo c1-convex-bsd - exit ;; - C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) - if getsysinfo -f scalar_acc - then echo c32-convex-bsd - else echo c2-convex-bsd - fi - exit ;; - C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) - echo c34-convex-bsd - exit ;; - C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) - echo c38-convex-bsd - exit ;; - C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) - echo c4-convex-bsd - exit ;; - CRAY*Y-MP:*:*:*) - echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; - CRAY*[A-Z]90:*:*:*) - echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ - | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ - -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ - -e 's/\.[^.]*$/.X/' - exit ;; - CRAY*TS:*:*:*) - echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; - CRAY*T3E:*:*:*) - echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; - CRAY*SV1:*:*:*) - echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; - *:UNICOS/mp:*:*) - echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; - F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) - FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` - FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` - FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` - echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" - exit ;; - 5000:UNIX_System_V:4.*:*) - FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` - FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'` - echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" - exit ;; - i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) - echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} - exit ;; - sparc*:BSD/OS:*:*) - echo sparc-unknown-bsdi${UNAME_RELEASE} - exit ;; - *:BSD/OS:*:*) - echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} - exit ;; - *:FreeBSD:*:*) - case ${UNAME_MACHINE} in - pc98) - echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; - amd64) - echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; - *) - echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; - esac - exit ;; - i*:CYGWIN*:*) - echo ${UNAME_MACHINE}-pc-cygwin - exit ;; - *:MINGW*:*) - echo ${UNAME_MACHINE}-pc-mingw32 - exit ;; - i*:windows32*:*) - # uname -m includes "-pc" on this system. - echo ${UNAME_MACHINE}-mingw32 - exit ;; - i*:PW*:*) - echo ${UNAME_MACHINE}-pc-pw32 - exit ;; - *:Interix*:[3456]*) - case ${UNAME_MACHINE} in - x86) - echo i586-pc-interix${UNAME_RELEASE} - exit ;; - EM64T | authenticamd) - echo x86_64-unknown-interix${UNAME_RELEASE} - exit ;; - IA64) - echo ia64-unknown-interix${UNAME_RELEASE} - exit ;; - esac ;; - [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) - echo i${UNAME_MACHINE}-pc-mks - exit ;; - i*:Windows_NT*:* | Pentium*:Windows_NT*:*) - # How do we know it's Interix rather than the generic POSIX subsystem? - # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we - # UNAME_MACHINE based on the output of uname instead of i386? - echo i586-pc-interix - exit ;; - i*:UWIN*:*) - echo ${UNAME_MACHINE}-pc-uwin - exit ;; - amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) - echo x86_64-unknown-cygwin - exit ;; - p*:CYGWIN*:*) - echo powerpcle-unknown-cygwin - exit ;; - prep*:SunOS:5.*:*) - echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - *:GNU:*:*) - # the GNU system - echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` - exit ;; - *:GNU/*:*:*) - # other systems with GNU libc and userland - echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu - exit ;; - i*86:Minix:*:*) - echo ${UNAME_MACHINE}-pc-minix - exit ;; - arm*:Linux:*:*) - eval $set_cc_for_build - if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \ - | grep -q __ARM_EABI__ - then - echo ${UNAME_MACHINE}-unknown-linux-gnu - else - echo ${UNAME_MACHINE}-unknown-linux-gnueabi - fi - exit ;; - avr32*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - cris:Linux:*:*) - echo cris-axis-linux-gnu - exit ;; - crisv32:Linux:*:*) - echo crisv32-axis-linux-gnu - exit ;; - frv:Linux:*:*) - echo frv-unknown-linux-gnu - exit ;; - ia64:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - m32r*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - m68*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - mips:Linux:*:*) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #undef CPU - #undef mips - #undef mipsel - #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) - CPU=mipsel - #else - #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) - CPU=mips - #else - CPU= - #endif - #endif -EOF - eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' - /^CPU/{ - s: ::g - p - }'`" - test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } - ;; - mips64:Linux:*:*) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #undef CPU - #undef mips64 - #undef mips64el - #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) - CPU=mips64el - #else - #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) - CPU=mips64 - #else - CPU= - #endif - #endif -EOF - eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' - /^CPU/{ - s: ::g - p - }'`" - test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } - ;; - or32:Linux:*:*) - echo or32-unknown-linux-gnu - exit ;; - ppc:Linux:*:*) - echo powerpc-unknown-linux-gnu - exit ;; - ppc64:Linux:*:*) - echo powerpc64-unknown-linux-gnu - exit ;; - alpha:Linux:*:*) - case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in - EV5) UNAME_MACHINE=alphaev5 ;; - EV56) UNAME_MACHINE=alphaev56 ;; - PCA56) UNAME_MACHINE=alphapca56 ;; - PCA57) UNAME_MACHINE=alphapca56 ;; - EV6) UNAME_MACHINE=alphaev6 ;; - EV67) UNAME_MACHINE=alphaev67 ;; - EV68*) UNAME_MACHINE=alphaev68 ;; - esac - objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null - if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi - echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} - exit ;; - parisc:Linux:*:* | hppa:Linux:*:*) - # Look for CPU level - case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in - PA7*) echo hppa1.1-unknown-linux-gnu ;; - PA8*) echo hppa2.0-unknown-linux-gnu ;; - *) echo hppa-unknown-linux-gnu ;; - esac - exit ;; - parisc64:Linux:*:* | hppa64:Linux:*:*) - echo hppa64-unknown-linux-gnu - exit ;; - s390:Linux:*:* | s390x:Linux:*:*) - echo ${UNAME_MACHINE}-ibm-linux - exit ;; - sh64*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - sh*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - sparc:Linux:*:* | sparc64:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - vax:Linux:*:*) - echo ${UNAME_MACHINE}-dec-linux-gnu - exit ;; - x86_64:Linux:*:*) - echo x86_64-unknown-linux-gnu - exit ;; - xtensa*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - i*86:Linux:*:*) - # The BFD linker knows what the default object file format is, so - # first see if it will tell us. cd to the root directory to prevent - # problems with other programs or directories called `ld' in the path. - # Set LC_ALL=C to ensure ld outputs messages in English. - ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \ - | sed -ne '/supported targets:/!d - s/[ ][ ]*/ /g - s/.*supported targets: *// - s/ .*// - p'` - case "$ld_supported_targets" in - elf32-i386) - TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu" - ;; - a.out-i386-linux) - echo "${UNAME_MACHINE}-pc-linux-gnuaout" - exit ;; - coff-i386) - echo "${UNAME_MACHINE}-pc-linux-gnucoff" - exit ;; - "") - # Either a pre-BFD a.out linker (linux-gnuoldld) or - # one that does not give us useful --help. - echo "${UNAME_MACHINE}-pc-linux-gnuoldld" - exit ;; - esac - # Determine whether the default compiler is a.out or elf - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #include - #ifdef __ELF__ - # ifdef __GLIBC__ - # if __GLIBC__ >= 2 - LIBC=gnu - # else - LIBC=gnulibc1 - # endif - # else - LIBC=gnulibc1 - # endif - #else - #if defined(__INTEL_COMPILER) || defined(__PGI) || defined(__SUNPRO_C) || defined(__SUNPRO_CC) - LIBC=gnu - #else - LIBC=gnuaout - #endif - #endif - #ifdef __dietlibc__ - LIBC=dietlibc - #endif -EOF - eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' - /^LIBC/{ - s: ::g - p - }'`" - test x"${LIBC}" != x && { - echo "${UNAME_MACHINE}-pc-linux-${LIBC}" - exit - } - test x"${TENTATIVE}" != x && { echo "${TENTATIVE}"; exit; } - ;; - i*86:DYNIX/ptx:4*:*) - # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. - # earlier versions are messed up and put the nodename in both - # sysname and nodename. - echo i386-sequent-sysv4 - exit ;; - i*86:UNIX_SV:4.2MP:2.*) - # Unixware is an offshoot of SVR4, but it has its own version - # number series starting with 2... - # I am not positive that other SVR4 systems won't match this, - # I just have to hope. -- rms. - # Use sysv4.2uw... so that sysv4* matches it. - echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} - exit ;; - i*86:OS/2:*:*) - # If we were able to find `uname', then EMX Unix compatibility - # is probably installed. - echo ${UNAME_MACHINE}-pc-os2-emx - exit ;; - i*86:XTS-300:*:STOP) - echo ${UNAME_MACHINE}-unknown-stop - exit ;; - i*86:atheos:*:*) - echo ${UNAME_MACHINE}-unknown-atheos - exit ;; - i*86:syllable:*:*) - echo ${UNAME_MACHINE}-pc-syllable - exit ;; - i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*) - echo i386-unknown-lynxos${UNAME_RELEASE} - exit ;; - i*86:*DOS:*:*) - echo ${UNAME_MACHINE}-pc-msdosdjgpp - exit ;; - i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) - UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` - if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then - echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} - else - echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} - fi - exit ;; - i*86:*:5:[678]*) - # UnixWare 7.x, OpenUNIX and OpenServer 6. - case `/bin/uname -X | grep "^Machine"` in - *486*) UNAME_MACHINE=i486 ;; - *Pentium) UNAME_MACHINE=i586 ;; - *Pent*|*Celeron) UNAME_MACHINE=i686 ;; - esac - echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} - exit ;; - i*86:*:3.2:*) - if test -f /usr/options/cb.name; then - UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then - UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` - (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 - (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ - && UNAME_MACHINE=i586 - (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ - && UNAME_MACHINE=i686 - (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ - && UNAME_MACHINE=i686 - echo ${UNAME_MACHINE}-pc-sco$UNAME_REL - else - echo ${UNAME_MACHINE}-pc-sysv32 - fi - exit ;; - pc:*:*:*) - # Left here for compatibility: - # uname -m prints for DJGPP always 'pc', but it prints nothing about - # the processor, so we play safe by assuming i386. - echo i386-pc-msdosdjgpp - exit ;; - Intel:Mach:3*:*) - echo i386-pc-mach3 - exit ;; - paragon:*:*:*) - echo i860-intel-osf1 - exit ;; - i860:*:4.*:*) # i860-SVR4 - if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then - echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 - else # Add other i860-SVR4 vendors below as they are discovered. - echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 - fi - exit ;; - mini*:CTIX:SYS*5:*) - # "miniframe" - echo m68010-convergent-sysv - exit ;; - mc68k:UNIX:SYSTEM5:3.51m) - echo m68k-convergent-sysv - exit ;; - M680?0:D-NIX:5.3:*) - echo m68k-diab-dnix - exit ;; - M68*:*:R3V[5678]*:*) - test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; - 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) - OS_REL='' - test -r /etc/.relid \ - && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` - /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && { echo i486-ncr-sysv4.3${OS_REL}; exit; } - /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ - && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; - 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) - /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && { echo i486-ncr-sysv4; exit; } ;; - m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) - echo m68k-unknown-lynxos${UNAME_RELEASE} - exit ;; - mc68030:UNIX_System_V:4.*:*) - echo m68k-atari-sysv4 - exit ;; - TSUNAMI:LynxOS:2.*:*) - echo sparc-unknown-lynxos${UNAME_RELEASE} - exit ;; - rs6000:LynxOS:2.*:*) - echo rs6000-unknown-lynxos${UNAME_RELEASE} - exit ;; - PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*) - echo powerpc-unknown-lynxos${UNAME_RELEASE} - exit ;; - SM[BE]S:UNIX_SV:*:*) - echo mips-dde-sysv${UNAME_RELEASE} - exit ;; - RM*:ReliantUNIX-*:*:*) - echo mips-sni-sysv4 - exit ;; - RM*:SINIX-*:*:*) - echo mips-sni-sysv4 - exit ;; - *:SINIX-*:*:*) - if uname -p 2>/dev/null >/dev/null ; then - UNAME_MACHINE=`(uname -p) 2>/dev/null` - echo ${UNAME_MACHINE}-sni-sysv4 - else - echo ns32k-sni-sysv - fi - exit ;; - PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort - # says - echo i586-unisys-sysv4 - exit ;; - *:UNIX_System_V:4*:FTX*) - # From Gerald Hewes . - # How about differentiating between stratus architectures? -djm - echo hppa1.1-stratus-sysv4 - exit ;; - *:*:*:FTX*) - # From seanf@swdc.stratus.com. - echo i860-stratus-sysv4 - exit ;; - i*86:VOS:*:*) - # From Paul.Green@stratus.com. - echo ${UNAME_MACHINE}-stratus-vos - exit ;; - *:VOS:*:*) - # From Paul.Green@stratus.com. - echo hppa1.1-stratus-vos - exit ;; - mc68*:A/UX:*:*) - echo m68k-apple-aux${UNAME_RELEASE} - exit ;; - news*:NEWS-OS:6*:*) - echo mips-sony-newsos6 - exit ;; - R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) - if [ -d /usr/nec ]; then - echo mips-nec-sysv${UNAME_RELEASE} - else - echo mips-unknown-sysv${UNAME_RELEASE} - fi - exit ;; - BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. - echo powerpc-be-beos - exit ;; - BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. - echo powerpc-apple-beos - exit ;; - BePC:BeOS:*:*) # BeOS running on Intel PC compatible. - echo i586-pc-beos - exit ;; - SX-4:SUPER-UX:*:*) - echo sx4-nec-superux${UNAME_RELEASE} - exit ;; - SX-5:SUPER-UX:*:*) - echo sx5-nec-superux${UNAME_RELEASE} - exit ;; - SX-6:SUPER-UX:*:*) - echo sx6-nec-superux${UNAME_RELEASE} - exit ;; - SX-7:SUPER-UX:*:*) - echo sx7-nec-superux${UNAME_RELEASE} - exit ;; - SX-8:SUPER-UX:*:*) - echo sx8-nec-superux${UNAME_RELEASE} - exit ;; - SX-8R:SUPER-UX:*:*) - echo sx8r-nec-superux${UNAME_RELEASE} - exit ;; - Power*:Rhapsody:*:*) - echo powerpc-apple-rhapsody${UNAME_RELEASE} - exit ;; - *:Rhapsody:*:*) - echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} - exit ;; - *:Darwin:*:*) - UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown - eval $set_cc_for_build - echo "int main(){}" > $dummy.c - if test "`$CC_FOR_BUILD -o $dummy $dummy.c; file $dummy | grep -c x86_64`" = 1 ; then - UNAME_PROCESSOR=x86_64 - fi - case $UNAME_PROCESSOR in - unknown) UNAME_PROCESSOR=powerpc ;; - esac - echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} - exit ;; - *:procnto*:*:* | *:QNX:[0123456789]*:*) - UNAME_PROCESSOR=`uname -p` - if test "$UNAME_PROCESSOR" = "x86"; then - UNAME_PROCESSOR=i386 - UNAME_MACHINE=pc - fi - echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} - exit ;; - *:QNX:*:4*) - echo i386-pc-qnx - exit ;; - NSE-?:NONSTOP_KERNEL:*:*) - echo nse-tandem-nsk${UNAME_RELEASE} - exit ;; - NSR-?:NONSTOP_KERNEL:*:*) - echo nsr-tandem-nsk${UNAME_RELEASE} - exit ;; - *:NonStop-UX:*:*) - echo mips-compaq-nonstopux - exit ;; - BS2000:POSIX*:*:*) - echo bs2000-siemens-sysv - exit ;; - DS/*:UNIX_System_V:*:*) - echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} - exit ;; - *:Plan9:*:*) - # "uname -m" is not consistent, so use $cputype instead. 386 - # is converted to i386 for consistency with other x86 - # operating systems. - if test "$cputype" = "386"; then - UNAME_MACHINE=i386 - else - UNAME_MACHINE="$cputype" - fi - echo ${UNAME_MACHINE}-unknown-plan9 - exit ;; - *:TOPS-10:*:*) - echo pdp10-unknown-tops10 - exit ;; - *:TENEX:*:*) - echo pdp10-unknown-tenex - exit ;; - KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) - echo pdp10-dec-tops20 - exit ;; - XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) - echo pdp10-xkl-tops20 - exit ;; - *:TOPS-20:*:*) - echo pdp10-unknown-tops20 - exit ;; - *:ITS:*:*) - echo pdp10-unknown-its - exit ;; - SEI:*:*:SEIUX) - echo mips-sei-seiux${UNAME_RELEASE} - exit ;; - *:DragonFly:*:*) - echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` - exit ;; - *:*VMS:*:*) - UNAME_MACHINE=`(uname -p) 2>/dev/null` - case "${UNAME_MACHINE}" in - A*) echo alpha-dec-vms ; exit ;; - I*) echo ia64-dec-vms ; exit ;; - V*) echo vax-dec-vms ; exit ;; - esac ;; - *:XENIX:*:SysV) - echo i386-pc-xenix - exit ;; - i*86:skyos:*:*) - echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//' - exit ;; - i*86:rdos:*:*) - echo ${UNAME_MACHINE}-pc-rdos - exit ;; -esac - -#echo '(No uname command or uname output not recognized.)' 1>&2 -#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2 - -eval $set_cc_for_build -cat >$dummy.c < -# include -#endif -main () -{ -#if defined (sony) -#if defined (MIPSEB) - /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, - I don't know.... */ - printf ("mips-sony-bsd\n"); exit (0); -#else -#include - printf ("m68k-sony-newsos%s\n", -#ifdef NEWSOS4 - "4" -#else - "" -#endif - ); exit (0); -#endif -#endif - -#if defined (__arm) && defined (__acorn) && defined (__unix) - printf ("arm-acorn-riscix\n"); exit (0); -#endif - -#if defined (hp300) && !defined (hpux) - printf ("m68k-hp-bsd\n"); exit (0); -#endif - -#if defined (NeXT) -#if !defined (__ARCHITECTURE__) -#define __ARCHITECTURE__ "m68k" -#endif - int version; - version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; - if (version < 4) - printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); - else - printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); - exit (0); -#endif - -#if defined (MULTIMAX) || defined (n16) -#if defined (UMAXV) - printf ("ns32k-encore-sysv\n"); exit (0); -#else -#if defined (CMU) - printf ("ns32k-encore-mach\n"); exit (0); -#else - printf ("ns32k-encore-bsd\n"); exit (0); -#endif -#endif -#endif - -#if defined (__386BSD__) - printf ("i386-pc-bsd\n"); exit (0); -#endif - -#if defined (sequent) -#if defined (i386) - printf ("i386-sequent-dynix\n"); exit (0); -#endif -#if defined (ns32000) - printf ("ns32k-sequent-dynix\n"); exit (0); -#endif -#endif - -#if defined (_SEQUENT_) - struct utsname un; - - uname(&un); - - if (strncmp(un.version, "V2", 2) == 0) { - printf ("i386-sequent-ptx2\n"); exit (0); - } - if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ - printf ("i386-sequent-ptx1\n"); exit (0); - } - printf ("i386-sequent-ptx\n"); exit (0); - -#endif - -#if defined (vax) -# if !defined (ultrix) -# include -# if defined (BSD) -# if BSD == 43 - printf ("vax-dec-bsd4.3\n"); exit (0); -# else -# if BSD == 199006 - printf ("vax-dec-bsd4.3reno\n"); exit (0); -# else - printf ("vax-dec-bsd\n"); exit (0); -# endif -# endif -# else - printf ("vax-dec-bsd\n"); exit (0); -# endif -# else - printf ("vax-dec-ultrix\n"); exit (0); -# endif -#endif - -#if defined (alliant) && defined (i860) - printf ("i860-alliant-bsd\n"); exit (0); -#endif - - exit (1); -} -EOF - -$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` && - { echo "$SYSTEM_NAME"; exit; } - -# Apollos put the system type in the environment. - -test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; } - -# Convex versions that predate uname can use getsysinfo(1) -if [ -x /usr/convex/getsysinfo ] -then - case `getsysinfo -f cpu_type` in - c1*) - echo c1-convex-bsd - exit ;; - c2*) - if getsysinfo -f scalar_acc - then echo c32-convex-bsd - else echo c2-convex-bsd - fi - exit ;; - c34*) - echo c34-convex-bsd - exit ;; - c38*) - echo c38-convex-bsd - exit ;; - c4*) - echo c4-convex-bsd - exit ;; - esac +# This is a wrapper for the config.guess from autoconf. The latter does not properly +# detect amd64 systems, since that require isainfo instead of uname. Instead of patching +# the autoconf system (which might easily get lost in a future update), we wrap it and +# fix the broken property, if needed. + +DIR=`dirname $0` +OUT=`. $DIR/autoconf-config.guess` +echo $OUT | grep i386-pc-solaris > /dev/null 2> /dev/null +if test $? = 0; then + # isainfo -n returns either i386 or amd64 on Intel systems + REAL_CPU=`isainfo -n` + OUT=$REAL_CPU`echo $OUT | sed -e 's/[^-]*//'` fi - -cat >&2 < in order to provide the needed -information to handle your system. - -config.guess timestamp = $timestamp - -uname -m = `(uname -m) 2>/dev/null || echo unknown` -uname -r = `(uname -r) 2>/dev/null || echo unknown` -uname -s = `(uname -s) 2>/dev/null || echo unknown` -uname -v = `(uname -v) 2>/dev/null || echo unknown` - -/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` -/bin/uname -X = `(/bin/uname -X) 2>/dev/null` - -hostinfo = `(hostinfo) 2>/dev/null` -/bin/universe = `(/bin/universe) 2>/dev/null` -/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` -/bin/arch = `(/bin/arch) 2>/dev/null` -/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` -/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` - -UNAME_MACHINE = ${UNAME_MACHINE} -UNAME_RELEASE = ${UNAME_RELEASE} -UNAME_SYSTEM = ${UNAME_SYSTEM} -UNAME_VERSION = ${UNAME_VERSION} -EOF - -exit 1 - -# Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "timestamp='" -# time-stamp-format: "%:y-%02m-%02d" -# time-stamp-end: "'" -# End: +echo $OUT --- old/common/autoconf/builddeps.conf.example 2012-07-03 20:04:02.357822396 +0200 +++ new/common/autoconf/builddeps.conf.example 2012-07-03 20:04:02.257820923 +0200 @@ -31,11 +31,11 @@ # Translate a configuration triplet/quadruplet into something # known by this configuration file. -# If no rewrite was found, then rewritten_host=${host} +# If no rewrite was found, then rewritten_target=${OPENJDK_TARGET_SYSTEM} REWRITE_i686_pc_linux_gnu=i686-unknown-linux-gnu REWRITE_i386_pc_solaris2_10=i686-sun-solaris2_10 -# The needed cups builddeps are host independent header files. +# The needed cups builddeps are platform independent header files. # I.e. they need not be part of the devkit. builddep_cups=lib/cups_1_3_9.zip builddep_cups_CFLAGS=-I${depdir} @@ -44,10 +44,10 @@ # for the build platform. builddep_devkit=sdk/sdk-${rewritten_build}-20110921.tar.gz -# The freetype dependency is partyl host dependent. +# The freetype dependency is partly platform dependent. # It is stored inside the sys-root. builddep_freetype2=sdk/sdk-${rewritten_build}-20110921.tar.gz -builddep_freetype2_CFLAGS=-I${depdir}/${rewritten_host}/sys-root/usr/include/freetype2 +builddep_freetype2_CFLAGS=-I${depdir}/${rewritten_target}/sys-root/usr/include/freetype2 builddep_freetype2_LIBS=-lfreetype # There are many other build dependencies, but they are implicitly --- old/common/autoconf/builddeps.m4 2012-07-03 20:04:02.727827841 +0200 +++ new/common/autoconf/builddeps.m4 2012-07-03 20:04:02.637826540 +0200 @@ -23,7 +23,7 @@ # questions. # -AC_DEFUN([BDEPS_SCAN_FOR_BUILDDEPS], +AC_DEFUN_ONCE([BDEPS_SCAN_FOR_BUILDDEPS], [ define(LIST_OF_BUILD_DEPENDENCIES,) if test "x$with_builddeps_server" != x || test "x$with_builddeps_conf" != x; then @@ -50,27 +50,27 @@ AC_MSG_ERROR([Could not find any builddeps.conf at all!]) fi fi - # Create build and host names that use _ instead of "-" and ".". + # Create build and target names that use _ instead of "-" and ".". # This is necessary to use them in variable names. - build_var=`echo ${build} | tr '-' '_' | tr '.' '_'` - host_var=`echo ${host} | tr '-' '_' | tr '.' '_'` - # Extract rewrite information for build and host + build_var=`echo ${OPENJDK_BUILD_SYSTEM} | tr '-' '_' | tr '.' '_'` + target_var=`echo ${OPENJDK_TARGET_SYSTEM} | tr '-' '_' | tr '.' '_'` + # Extract rewrite information for build and target eval rewritten_build=\${REWRITE_${build_var}} if test "x$rewritten_build" = x; then - rewritten_build=${build} + rewritten_build=${OPENJDK_BUILD_SYSTEM} echo Build stays the same $rewritten_build else echo Rewriting build for builddeps into $rewritten_build fi - eval rewritten_host=\${REWRITE_${host_var}} - if test "x$rewritten_host" = x; then - rewritten_host=${host} - echo Host stays the same $rewritten_host + eval rewritten_target=\${REWRITE_${target_var}} + if test "x$rewritten_target" = x; then + rewritten_target=${OPENJDK_TARGET_SYSTEM} + echo Target stays the same $rewritten_target else - echo Rewriting host for builddeps into $rewritten_host + echo Rewriting target for builddeps into $rewritten_target fi rewritten_build_var=`echo ${rewritten_build} | tr '-' '_' | tr '.' '_'` - rewritten_host_var=`echo ${rewritten_host} | tr '-' '_' | tr '.' '_'` + rewritten_target_var=`echo ${rewritten_target} | tr '-' '_' | tr '.' '_'` fi AC_CHECK_PROGS(BDEPS_UNZIP, [7z unzip]) if test "x$BDEPS_UNZIP" = x7z; then @@ -127,11 +127,11 @@ if test "x$with_builddeps_server" != x || test "x$with_builddeps_conf" != x; then # Source the builddeps file again, to make sure it uses the latest variables! . $builddepsfile - # Look for a host and build machine specific resource! - eval resource=\${builddep_$2_BUILD_${rewritten_build_var}_HOST_${rewritten_host_var}} + # Look for a target and build machine specific resource! + eval resource=\${builddep_$2_BUILD_${rewritten_build_var}_TARGET_${rewritten_target_var}} if test "x$resource" = x; then - # Ok, lets instead look for a host specific resource - eval resource=\${builddep_$2_HOST_${rewritten_host_var}} + # Ok, lets instead look for a target specific resource + eval resource=\${builddep_$2_TARGET_${rewritten_target_var}} fi if test "x$resource" = x; then # Ok, lets instead look for a build specific resource @@ -228,3 +228,33 @@ $5=$installdir fi ]) + +AC_DEFUN_ONCE([BDEPS_CONFIGURE_BUILDDEPS], +[ +AC_ARG_WITH(builddeps-conf, [AS_HELP_STRING([--with-builddeps-conf], + [use this configuration file for the builddeps])]) + +AC_ARG_WITH(builddeps-server, [AS_HELP_STRING([--with-builddeps-server], + [download and use build dependencies from this server url, e.g. --with-builddeps-server=ftp://example.com/dir])]) + +AC_ARG_WITH(builddeps-dir, [AS_HELP_STRING([--with-builddeps-dir], + [store downloaded build dependencies here @<:@d/localhome/builddeps@:>@])], + [], + [with_builddeps_dir=/localhome/builddeps]) + +AC_ARG_WITH(builddeps-group, [AS_HELP_STRING([--with-builddeps-group], + [chgrp the downloaded build dependencies to this group])]) + +AC_ARG_ENABLE([list-builddeps], [AS_HELP_STRING([--enable-list-builddeps], + [list all build dependencies known to the configure script])], + [LIST_BUILDDEPS="${enableval}"], [LIST_BUILDDEPS='no']) + +if test "x$LIST_BUILDDEPS" = xyes; then + echo + echo List of build dependencies known to the configure script, + echo that can be used in builddeps.conf files: + cat $AUTOCONF_DIR/*.ac $AUTOCONF_DIR/*.m4 | grep BDEPS_CHECK_MODUL[E]\( | cut -f 2 -d ',' | tr -d ' ' | sort + echo + exit 1 +fi +]) --- old/common/autoconf/configure 2012-07-03 20:04:03.137833889 +0200 +++ new/common/autoconf/configure 2012-07-03 20:04:03.017832121 +0200 @@ -1,16781 +1,121 @@ -#! /bin/sh -# Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.67 for openjdk version-0.1. -# -# Report bugs to . -# -# -# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, -# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software -# Foundation, Inc. -# -# -# This configure script is free software; the Free Software Foundation -# gives unlimited permission to copy, distribute and modify it. -## -------------------- ## -## M4sh Initialization. ## -## -------------------- ## +#!/bin/sh -# Be more Bourne compatible -DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in #( - *posix*) : - set -o posix ;; #( - *) : - ;; -esac -fi - - -as_nl=' -' -export as_nl -# Printing a long string crashes Solaris 7 /usr/bin/printf. -as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo -# Prefer a ksh shell builtin over an external printf program on Solaris, -# but without wasting forks for bash or zsh. -if test -z "$BASH_VERSION$ZSH_VERSION" \ - && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='print -r --' - as_echo_n='print -rn --' -elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='printf %s\n' - as_echo_n='printf %s' -else - if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then - as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' - as_echo_n='/usr/ucb/echo -n' - else - as_echo_body='eval expr "X$1" : "X\\(.*\\)"' - as_echo_n_body='eval - arg=$1; - case $arg in #( - *"$as_nl"*) - expr "X$arg" : "X\\(.*\\)$as_nl"; - arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; - esac; - expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" - ' - export as_echo_n_body - as_echo_n='sh -c $as_echo_n_body as_echo' - fi - export as_echo_body - as_echo='sh -c $as_echo_body as_echo' -fi - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - PATH_SEPARATOR=: - (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { - (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || - PATH_SEPARATOR=';' - } -fi - - -# IFS -# We need space, tab and new line, in precisely that order. Quoting is -# there to prevent editors from complaining about space-tab. -# (If _AS_PATH_WALK were called with IFS unset, it would disable word -# splitting by setting IFS to empty value.) -IFS=" "" $as_nl" - -# Find who we are. Look in the path if we contain no directory separator. -case $0 in #(( - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break - done -IFS=$as_save_IFS - - ;; -esac -# We did not find ourselves, most probably we were run as `sh COMMAND' -# in which case we are not to be found in the path. -if test "x$as_myself" = x; then - as_myself=$0 -fi -if test ! -f "$as_myself"; then - $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - exit 1 -fi - -# Unset variables that we do not need and which cause bugs (e.g. in -# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" -# suppresses any "Segmentation fault" message there. '((' could -# trigger a bug in pdksh 5.2.14. -for as_var in BASH_ENV ENV MAIL MAILPATH -do eval test x\${$as_var+set} = xset \ - && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : -done -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -LC_ALL=C -export LC_ALL -LANGUAGE=C -export LANGUAGE - -# CDPATH. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -if test "x$CONFIG_SHELL" = x; then - as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which - # is contrary to our usage. Disable this feature. - alias -g '\${1+\"\$@\"}'='\"\$@\"' - setopt NO_GLOB_SUBST -else - case \`(set -o) 2>/dev/null\` in #( - *posix*) : - set -o posix ;; #( - *) : - ;; -esac -fi -" - as_required="as_fn_return () { (exit \$1); } -as_fn_success () { as_fn_return 0; } -as_fn_failure () { as_fn_return 1; } -as_fn_ret_success () { return 0; } -as_fn_ret_failure () { return 1; } - -exitcode=0 -as_fn_success || { exitcode=1; echo as_fn_success failed.; } -as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } -as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } -as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } -if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : - -else - exitcode=1; echo positional parameters were not saved. -fi -test x\$exitcode = x0 || exit 1" - as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO - as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO - eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && - test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 -test \$(( 1 + 1 )) = 2 || exit 1" - if (eval "$as_required") 2>/dev/null; then : - as_have_required=yes -else - as_have_required=no -fi - if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : - -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -as_found=false -for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - as_found=: - case $as_dir in #( - /*) - for as_base in sh bash ksh sh5; do - # Try only shells that exist, to save several forks. - as_shell=$as_dir/$as_base - if { test -f "$as_shell" || test -f "$as_shell.exe"; } && - { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : - CONFIG_SHELL=$as_shell as_have_required=yes - if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : - break 2 -fi -fi - done;; - esac - as_found=false -done -$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && - { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : - CONFIG_SHELL=$SHELL as_have_required=yes -fi; } -IFS=$as_save_IFS - - - if test "x$CONFIG_SHELL" != x; then : - # We cannot yet assume a decent shell, so we have to provide a - # neutralization value for shells without unset; and this also - # works around shells that cannot unset nonexistent variables. - BASH_ENV=/dev/null - ENV=/dev/null - (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV - export CONFIG_SHELL - exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} -fi - - if test x$as_have_required = xno; then : - $as_echo "$0: This script requires a shell more modern than all" - $as_echo "$0: the shells that I found on your system." - if test x${ZSH_VERSION+set} = xset ; then - $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" - $as_echo "$0: be upgraded to zsh 4.3.4 or later." - else - $as_echo "$0: Please tell bug-autoconf@gnu.org and -$0: build-infra-dev@openjdk.java.net about your system, -$0: including any error possibly output before this -$0: message. Then install a modern shell, or manually run -$0: the script under such a shell if you do have one." - fi - exit 1 -fi -fi -fi -SHELL=${CONFIG_SHELL-/bin/sh} -export SHELL -# Unset more variables known to interfere with behavior of common tools. -CLICOLOR_FORCE= GREP_OPTIONS= -unset CLICOLOR_FORCE GREP_OPTIONS - -## --------------------- ## -## M4sh Shell Functions. ## -## --------------------- ## -# as_fn_unset VAR -# --------------- -# Portably unset VAR. -as_fn_unset () -{ - { eval $1=; unset $1;} -} -as_unset=as_fn_unset - -# as_fn_set_status STATUS -# ----------------------- -# Set $? to STATUS, without forking. -as_fn_set_status () -{ - return $1 -} # as_fn_set_status - -# as_fn_exit STATUS -# ----------------- -# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. -as_fn_exit () -{ - set +e - as_fn_set_status $1 - exit $1 -} # as_fn_exit - -# as_fn_mkdir_p -# ------------- -# Create "$as_dir" as a directory, including parents if necessary. -as_fn_mkdir_p () -{ - - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || eval $as_mkdir_p || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" - - -} # as_fn_mkdir_p -# as_fn_append VAR VALUE -# ---------------------- -# Append the text in VALUE to the end of the definition contained in VAR. Take -# advantage of any shell optimizations that allow amortized linear growth over -# repeated appends, instead of the typical quadratic growth present in naive -# implementations. -if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : - eval 'as_fn_append () - { - eval $1+=\$2 - }' -else - as_fn_append () - { - eval $1=\$$1\$2 - } -fi # as_fn_append - -# as_fn_arith ARG... -# ------------------ -# Perform arithmetic evaluation on the ARGs, and store the result in the -# global $as_val. Take advantage of shells that can avoid forks. The arguments -# must be portable across $(()) and expr. -if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : - eval 'as_fn_arith () - { - as_val=$(( $* )) - }' -else - as_fn_arith () - { - as_val=`expr "$@" || test $? -eq 1` - } -fi # as_fn_arith - - -# as_fn_error STATUS ERROR [LINENO LOG_FD] -# ---------------------------------------- -# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are -# provided, also output the error to LOG_FD, referencing LINENO. Then exit the -# script with STATUS, using 1 if that was 0. -as_fn_error () -{ - as_status=$1; test $as_status -eq 0 && as_status=1 - if test "$4"; then - as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 - fi - $as_echo "$as_me: error: $2" >&2 - as_fn_exit $as_status -} # as_fn_error - -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - -if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi - -as_me=`$as_basename -- "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ - s//\1/ - q - } - /^X\/\(\/\/\)$/{ - s//\1/ - q - } - /^X\/\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - - - as_lineno_1=$LINENO as_lineno_1a=$LINENO - as_lineno_2=$LINENO as_lineno_2a=$LINENO - eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && - test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { - # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) - sed -n ' - p - /[$]LINENO/= - ' <$as_myself | - sed ' - s/[$]LINENO.*/&-/ - t lineno - b - :lineno - N - :loop - s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ - t loop - s/-\n.*// - ' >$as_me.lineno && - chmod +x "$as_me.lineno" || - { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } - - # Don't try to exec as it changes $[0], causing all sort of problems - # (the dirname of $[0] is not the place where we might find the - # original and so on. Autoconf is especially sensitive to this). - . "./$as_me.lineno" - # Exit status is that of the last command. - exit -} - -ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in #((((( --n*) - case `echo 'xy\c'` in - *c*) ECHO_T=' ';; # ECHO_T is single tab character. - xy) ECHO_C='\c';; - *) echo `echo ksh88 bug on AIX 6.1` > /dev/null - ECHO_T=' ';; - esac;; -*) - ECHO_N='-n';; -esac - -rm -f conf$$ conf$$.exe conf$$.file -if test -d conf$$.dir; then - rm -f conf$$.dir/conf$$.file -else - rm -f conf$$.dir - mkdir conf$$.dir 2>/dev/null -fi -if (echo >conf$$.file) 2>/dev/null; then - if ln -s conf$$.file conf$$ 2>/dev/null; then - as_ln_s='ln -s' - # ... but there are two gotchas: - # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. - # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -p'. - ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -p' - elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln - else - as_ln_s='cp -p' - fi -else - as_ln_s='cp -p' -fi -rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -rmdir conf$$.dir 2>/dev/null - -if mkdir -p . 2>/dev/null; then - as_mkdir_p='mkdir -p "$as_dir"' -else - test -d ./-p && rmdir ./-p - as_mkdir_p=false -fi - -if test -x / >/dev/null 2>&1; then - as_test_x='test -x' -else - if ls -dL / >/dev/null 2>&1; then - as_ls_L_option=L - else - as_ls_L_option= - fi - as_test_x=' - eval sh -c '\'' - if test -d "$1"; then - test -d "$1/."; - else - case $1 in #( - -*)set "./$1";; - esac; - case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #(( - ???[sx]*):;;*)false;;esac;fi - '\'' sh - ' -fi -as_executable_p=$as_test_x - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - - -test -n "$DJDIR" || exec 7<&0 &1 - -# Name of the host. -# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, -# so uname gets run too. -ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` - -# -# Initializations. -# -ac_default_prefix=/usr/local -ac_clean_files= -ac_config_libobj_dir=. -LIBOBJS= -cross_compiling=no -subdirs= -MFLAGS= -MAKEFLAGS= - -# Identity of this package. -PACKAGE_NAME='openjdk' -PACKAGE_TARNAME='openjdk' -PACKAGE_VERSION='version-0.1' -PACKAGE_STRING='openjdk version-0.1' -PACKAGE_BUGREPORT='build-infra-dev@openjdk.java.net' -PACKAGE_URL='' - -# Factoring default headers for most tests. -ac_includes_default="\ -#include -#ifdef HAVE_SYS_TYPES_H -# include -#endif -#ifdef HAVE_SYS_STAT_H -# include -#endif -#ifdef STDC_HEADERS -# include -# include -#else -# ifdef HAVE_STDLIB_H -# include -# endif -#endif -#ifdef HAVE_STRING_H -# if !defined STDC_HEADERS && defined HAVE_MEMORY_H -# include -# endif -# include -#endif -#ifdef HAVE_STRINGS_H -# include -#endif -#ifdef HAVE_INTTYPES_H -# include -#endif -#ifdef HAVE_STDINT_H -# include -#endif -#ifdef HAVE_UNISTD_H -# include -#endif" - -ac_subst_vars='LTLIBOBJS -LIBOBJS -CACERTS_FILE -TEST_IN_BUILD -SALIB_NAME -OS_VERSION_MICRO -OS_VERSION_MINOR -OS_VERSION_MAJOR -LIBCXX -LDFLAGS_JDKEXE_SUFFIX -LDFLAGS_JDKLIB_SUFFIX -LDFLAGS_JDKEXE -LDFLAGS_JDKLIB -CXXFLAGS_JDKEXE -CXXFLAGS_JDKLIB -CFLAGS_JDKEXE -CFLAGS_JDKLIB -PACKAGE_PATH -IMAGES_MAKE_ARGS -IMAGES_OUTPUTDIR -JDK_MAKE_ARGS -JDK_OUTPUTDIR -HOTSPOT_MAKE_ARGS -HOTSPOT_DIST -HOTSPOT_OUTPUTDIR -JAXWS_MAKE_ARGS -JAXWS_DIST -JAXWS_OUTPUTDIR -JAXP_MAKE_ARGS -JAXP_DIST -JAXP_OUTPUTDIR -CORBA_MAKE_ARGS -CORBA_DIST -CORBA_OUTPUTDIR -LANGTOOLS_MAKE_ARGS -LANGTOOLS_DIST -LANGTOOLS_OUTPUTDIR -CXX_FLAG_DEPS -C_FLAG_DEPS -CXX_O_FLAG_NONE -CXX_O_FLAG_NORM -CXX_O_FLAG_HI -CXX_O_FLAG_HIGHEST -C_O_FLAG_NONE -C_O_FLAG_NORM -C_O_FLAG_HI -C_O_FLAG_HIGHEST -DISABLE_NIMBUS -GENERATE_DOCS -ENABLE_DOCS -LIBDL -LIBM -USE_EXTERNAL_LIBZ -USE_EXTERNAL_LIBGIF -USE_EXTERNAL_LIBJPEG -PULSE_LIBS -PULSE_CFLAGS -LIBPULSE_LIBS -LIBPULSE_CFLAGS -ALSA_LIBS -ALSA_CFLAGS -FREETYPE2_LIB_PATH -USING_SYSTEM_FT_LIB -FREETYPE2_LIBS -FREETYPE2_CFLAGS -CUPS_LIBS -CUPS_CFLAGS -OPENWIN_HOME -X_EXTRA_LIBS -X_LIBS -X_PRE_LIBS -X_CFLAGS -XMKMF -JAVAC_USE_MODE -JAVAC_USE_DEPS -JAVAC_SERVER_CORES -JAVAC_SERVERS -JAVAC_USE_REMOTE -SERVER_JAVA -BOOT_JDK_JVMARGS -OVERRIDE_SRC_ROOT -ADD_SRC_ROOT -NATIVE2ASCII -RMIC -JAR -JAVAH -JAVAC_FLAGS -JAVAC -BOOT_JDK_SOURCETARGET -JAVA -BOOT_TOOLSJAR -BOOT_RTJAR -BOOT_JDK -JAVA_CHECK -JAVAC_CHECK -ENDIAN -POST_MCS_CMD -POST_STRIP_CMD -SET_SHARED_LIBRARY_ORIGIN -CXX_FLAG_REORDER -C_FLAG_REORDER -SET_SHARED_LIBRARY_MAPFILE -SET_SHARED_LIBRARY_NAME -SHARED_LIBRARY_FLAGS -EXE_SUFFIX -STATIC_LIBRARY_SUFFIX -SHARED_LIBRARY_SUFFIX -LIBRARY_PREFIX -STATIC_LIBRARY -SHARED_LIBRARY -OBJ_SUFFIX -USE_PRECOMPILED_HEADER -ARCH_DATA_MODEL -LP64 -BUILD_LOG_WRAPPER -BUILD_LOG -CCACHE -UNCYGDRIVE -MCS -STRIP -NM -ASFLAGS -AS -CXXCPP -CPP -COMPILER_TYPE -RC_FLAGS -DUMPBIN -WINAR -RC -MT -WINLD -ARFLAGS -AR -LDEXECXX -LDCXX -LDEXE -LD -ac_ct_OBJC -OBJCFLAGS -OBJC -ac_ct_CXX -CXXFLAGS -CXX -OBJEXT -EXEEXT -ac_ct_CC -CPPFLAGS -LDFLAGS -CFLAGS -CC -HOSTCXX -HOSTCC -HOST_CXX -HOST_CC -DEFINE_CROSS_COMPILE_ARCH -AR_OUT_OPTION -LD_OUT_OPTION -EXE_OUT_OPTION -CC_OUT_OPTION -SYS_ROOT -BDEPS_FTP -BDEPS_UNZIP -PKG_CONFIG -JDK_TOPDIR -HOTSPOT_TOPDIR -JAXWS_TOPDIR -JAXP_TOPDIR -CORBA_TOPDIR -LANGTOOLS_TOPDIR -OUTPUT_ROOT -CONF_NAME -SPEC -MSVCR100DLL -CHECK_FOR_VCINSTALLDIR -SETUPDEVENV -COOKED_BUILD_NUMBER -FULL_VERSION -RELEASE -JDK_VERSION -RUNTIME_NAME -COPYRIGHT_YEAR -COMPANY_NAME -JDK_RC_PLATFORM_NAME -PRODUCT_SUFFIX -PRODUCT_NAME -LAUNCHER_NAME -MILESTONE -JDK_BUILD_NUMBER -JDK_UPDATE_VERSION -JDK_MICRO_VERSION -JDK_MINOR_VERSION -JDK_MAJOR_VERSION -BUILD_VARIANT_RELEASE -DEBUG_CLASSFILES -FASTDEBUG -VARIANT -DEBUG_LEVEL -JVM_VARIANT_ZEROSHARK -JVM_VARIANT_ZERO -JVM_VARIANT_KERNEL -JVM_VARIANT_CLIENT -JVM_VARIANT_SERVER -JVM_VARIANTS -BUILD_HEADLESS_ONLY -BUILD_HEADLESS -SUPPORT_HEADFUL -SUPPORT_HEADLESS -JDK_VARIANT -MINIMIZE_RAM_USAGE -JAVASE_EMBEDDED -JIGSAW -SET_OPENJDK -PATH_SEP -CYGPATH -SRC_ROOT -MEMORY_SIZE -CONCURRENT_BUILD_JOBS -NUM_CORES -DATE_WHEN_CONFIGURED -REQUIRED_OS_VERSION -REQUIRED_OS_NAME -LEGACY_BUILD_CPU3 -LEGACY_BUILD_CPU2 -LEGACY_BUILD_CPU1 -BUILD_CPU_ENDIAN -BUILD_CPU_BITS -BUILD_CPU_ARCH -BUILD_CPU -LEGACY_BUILD_OS_API -BUILD_OS_API -BUILD_OS_FAMILY -BUILD_OS -LEGACY_HOST_CPU3 -LEGACY_HOST_CPU2 -LEGACY_HOST_CPU1 -HOST_CPU_ENDIAN -HOST_CPU_BITS -HOST_CPU_ARCH -HOST_CPU -LEGACY_HOST_OS_API -HOST_OS_API -HOST_OS_FAMILY -HOST_OS -BUILD -HOST -host_os -host_vendor -host_cpu -host -build_os -build_vendor -build_cpu -build -HG -FILE -EXPR -READELF -OTOOL -LDD -UNZIP -ZIP -XARGS -WC -TOUCH -TR -TEE -TAIL -TAR -SORT -SH -SED -RM -THEPWDCMD -PRINTF -NAWK -MV -MKDIR -MAKE -LS -LN -HEAD -FIND_DELETE -FIND -FGREP -EGREP -GREP -ECHO -DIFF -DF -DATE -CUT -CPIO -CP -CHMOD -CAT -AWK -READLINK -CONFIGURE_COMMAND_LINE -PKGHANDLER -target_alias -host_alias -build_alias -LIBS -ECHO_T -ECHO_N -ECHO_C -DEFS -mandir -localedir -libdir -psdir -pdfdir -dvidir -htmldir -infodir -docdir -oldincludedir -includedir -localstatedir -sharedstatedir -sysconfdir -datadir -datarootdir -libexecdir -sbindir -bindir -program_transform_name -prefix -exec_prefix -PACKAGE_URL -PACKAGE_BUGREPORT -PACKAGE_STRING -PACKAGE_VERSION -PACKAGE_TARNAME -PACKAGE_NAME -PATH_SEPARATOR -SHELL' -ac_subst_files='' -ac_user_opts=' -enable_option_checking -with_data_model -with_num_cores -with_memory_size -enable_openjdk_only -enable_jigsaw -with_jdk_variant -enable_headful -with_jvm_variants -enable_debug -with_debug_level -with_msvcr100dll -with_builddeps_conf -with_builddeps_server -with_builddeps_dir -with_builddeps_group -enable_list_builddeps -with_sys_root -enable_ccache -with_ccache_dir -enable_precompiled_headers -with_boot_jdk -with_add_source_root -with_override_source_root -with_adds_and_overrides -with_override_langtools -with_override_corba -with_override_jaxp -with_override_jaxws -with_override_hotspot -with_override_jdk -with_boot_jdk_jvmargs -with_server_java -enable_javac_server -with_javac_server_cores -enable_javac_deps -enable_javac_multi_core -enable_macosx_runtime_support -with_x -with_cups -with_cups_include -with_cups_lib -with_freetype -with_alsa -with_alsa_include -with_alsa_lib -with_pulse -with_pulse_include -with_pulse_lib -enable_docs -enable_nimbus -enable_static_link_stdc__ -enable_hotspot_test_in_build -with_cacerts_file -' - ac_precious_vars='build_alias -host_alias -target_alias -PKG_CONFIG -CC -CFLAGS -LDFLAGS -LIBS -CPPFLAGS -CXX -CXXFLAGS -CCC -OBJC -OBJCFLAGS -CPP -CXXCPP -XMKMF -FREETYPE2_CFLAGS -FREETYPE2_LIBS -ALSA_CFLAGS -ALSA_LIBS -LIBPULSE_CFLAGS -LIBPULSE_LIBS' - - -# Initialize some variables set by options. -ac_init_help= -ac_init_version=false -ac_unrecognized_opts= -ac_unrecognized_sep= -# The variables have the same names as the options, with -# dashes changed to underlines. -cache_file=/dev/null -exec_prefix=NONE -no_create= -no_recursion= -prefix=NONE -program_prefix=NONE -program_suffix=NONE -program_transform_name=s,x,x, -silent= -site= -srcdir= -verbose= -x_includes=NONE -x_libraries=NONE - -# Installation directory options. -# These are left unexpanded so users can "make install exec_prefix=/foo" -# and all the variables that are supposed to be based on exec_prefix -# by default will actually change. -# Use braces instead of parens because sh, perl, etc. also accept them. -# (The list follows the same order as the GNU Coding Standards.) -bindir='${exec_prefix}/bin' -sbindir='${exec_prefix}/sbin' -libexecdir='${exec_prefix}/libexec' -datarootdir='${prefix}/share' -datadir='${datarootdir}' -sysconfdir='${prefix}/etc' -sharedstatedir='${prefix}/com' -localstatedir='${prefix}/var' -includedir='${prefix}/include' -oldincludedir='/usr/include' -docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' -infodir='${datarootdir}/info' -htmldir='${docdir}' -dvidir='${docdir}' -pdfdir='${docdir}' -psdir='${docdir}' -libdir='${exec_prefix}/lib' -localedir='${datarootdir}/locale' -mandir='${datarootdir}/man' - -ac_prev= -ac_dashdash= -for ac_option -do - # If the previous option needs an argument, assign it. - if test -n "$ac_prev"; then - eval $ac_prev=\$ac_option - ac_prev= - continue - fi - - case $ac_option in - *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; - *=) ac_optarg= ;; - *) ac_optarg=yes ;; - esac - - # Accept the important Cygnus configure options, so we can diagnose typos. - - case $ac_dashdash$ac_option in - --) - ac_dashdash=yes ;; - - -bindir | --bindir | --bindi | --bind | --bin | --bi) - ac_prev=bindir ;; - -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) - bindir=$ac_optarg ;; - - -build | --build | --buil | --bui | --bu) - ac_prev=build_alias ;; - -build=* | --build=* | --buil=* | --bui=* | --bu=*) - build_alias=$ac_optarg ;; - - -cache-file | --cache-file | --cache-fil | --cache-fi \ - | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) - ac_prev=cache_file ;; - -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ - | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) - cache_file=$ac_optarg ;; - - --config-cache | -C) - cache_file=config.cache ;; - - -datadir | --datadir | --datadi | --datad) - ac_prev=datadir ;; - -datadir=* | --datadir=* | --datadi=* | --datad=*) - datadir=$ac_optarg ;; - - -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ - | --dataroo | --dataro | --datar) - ac_prev=datarootdir ;; - -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ - | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) - datarootdir=$ac_optarg ;; - - -disable-* | --disable-*) - ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid feature name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"enable_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval enable_$ac_useropt=no ;; - - -docdir | --docdir | --docdi | --doc | --do) - ac_prev=docdir ;; - -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) - docdir=$ac_optarg ;; - - -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) - ac_prev=dvidir ;; - -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) - dvidir=$ac_optarg ;; - - -enable-* | --enable-*) - ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid feature name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"enable_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval enable_$ac_useropt=\$ac_optarg ;; - - -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ - | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ - | --exec | --exe | --ex) - ac_prev=exec_prefix ;; - -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ - | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ - | --exec=* | --exe=* | --ex=*) - exec_prefix=$ac_optarg ;; - - -gas | --gas | --ga | --g) - # Obsolete; use --with-gas. - with_gas=yes ;; - - -help | --help | --hel | --he | -h) - ac_init_help=long ;; - -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) - ac_init_help=recursive ;; - -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) - ac_init_help=short ;; - - -host | --host | --hos | --ho) - ac_prev=host_alias ;; - -host=* | --host=* | --hos=* | --ho=*) - host_alias=$ac_optarg ;; - - -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) - ac_prev=htmldir ;; - -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ - | --ht=*) - htmldir=$ac_optarg ;; - - -includedir | --includedir | --includedi | --included | --include \ - | --includ | --inclu | --incl | --inc) - ac_prev=includedir ;; - -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ - | --includ=* | --inclu=* | --incl=* | --inc=*) - includedir=$ac_optarg ;; - - -infodir | --infodir | --infodi | --infod | --info | --inf) - ac_prev=infodir ;; - -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) - infodir=$ac_optarg ;; - - -libdir | --libdir | --libdi | --libd) - ac_prev=libdir ;; - -libdir=* | --libdir=* | --libdi=* | --libd=*) - libdir=$ac_optarg ;; - - -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ - | --libexe | --libex | --libe) - ac_prev=libexecdir ;; - -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ - | --libexe=* | --libex=* | --libe=*) - libexecdir=$ac_optarg ;; - - -localedir | --localedir | --localedi | --localed | --locale) - ac_prev=localedir ;; - -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) - localedir=$ac_optarg ;; - - -localstatedir | --localstatedir | --localstatedi | --localstated \ - | --localstate | --localstat | --localsta | --localst | --locals) - ac_prev=localstatedir ;; - -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ - | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) - localstatedir=$ac_optarg ;; - - -mandir | --mandir | --mandi | --mand | --man | --ma | --m) - ac_prev=mandir ;; - -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) - mandir=$ac_optarg ;; - - -nfp | --nfp | --nf) - # Obsolete; use --without-fp. - with_fp=no ;; - - -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c | -n) - no_create=yes ;; - - -no-recursion | --no-recursion | --no-recursio | --no-recursi \ - | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) - no_recursion=yes ;; - - -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ - | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ - | --oldin | --oldi | --old | --ol | --o) - ac_prev=oldincludedir ;; - -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ - | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ - | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) - oldincludedir=$ac_optarg ;; - - -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) - ac_prev=prefix ;; - -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) - prefix=$ac_optarg ;; - - -program-prefix | --program-prefix | --program-prefi | --program-pref \ - | --program-pre | --program-pr | --program-p) - ac_prev=program_prefix ;; - -program-prefix=* | --program-prefix=* | --program-prefi=* \ - | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) - program_prefix=$ac_optarg ;; - - -program-suffix | --program-suffix | --program-suffi | --program-suff \ - | --program-suf | --program-su | --program-s) - ac_prev=program_suffix ;; - -program-suffix=* | --program-suffix=* | --program-suffi=* \ - | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) - program_suffix=$ac_optarg ;; - - -program-transform-name | --program-transform-name \ - | --program-transform-nam | --program-transform-na \ - | --program-transform-n | --program-transform- \ - | --program-transform | --program-transfor \ - | --program-transfo | --program-transf \ - | --program-trans | --program-tran \ - | --progr-tra | --program-tr | --program-t) - ac_prev=program_transform_name ;; - -program-transform-name=* | --program-transform-name=* \ - | --program-transform-nam=* | --program-transform-na=* \ - | --program-transform-n=* | --program-transform-=* \ - | --program-transform=* | --program-transfor=* \ - | --program-transfo=* | --program-transf=* \ - | --program-trans=* | --program-tran=* \ - | --progr-tra=* | --program-tr=* | --program-t=*) - program_transform_name=$ac_optarg ;; - - -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) - ac_prev=pdfdir ;; - -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) - pdfdir=$ac_optarg ;; - - -psdir | --psdir | --psdi | --psd | --ps) - ac_prev=psdir ;; - -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) - psdir=$ac_optarg ;; - - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - silent=yes ;; - - -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) - ac_prev=sbindir ;; - -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ - | --sbi=* | --sb=*) - sbindir=$ac_optarg ;; - - -sharedstatedir | --sharedstatedir | --sharedstatedi \ - | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ - | --sharedst | --shareds | --shared | --share | --shar \ - | --sha | --sh) - ac_prev=sharedstatedir ;; - -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ - | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ - | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ - | --sha=* | --sh=*) - sharedstatedir=$ac_optarg ;; - - -site | --site | --sit) - ac_prev=site ;; - -site=* | --site=* | --sit=*) - site=$ac_optarg ;; - - -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) - ac_prev=srcdir ;; - -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) - srcdir=$ac_optarg ;; - - -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ - | --syscon | --sysco | --sysc | --sys | --sy) - ac_prev=sysconfdir ;; - -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ - | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) - sysconfdir=$ac_optarg ;; - - -target | --target | --targe | --targ | --tar | --ta | --t) - ac_prev=target_alias ;; - -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) - target_alias=$ac_optarg ;; - - -v | -verbose | --verbose | --verbos | --verbo | --verb) - verbose=yes ;; - - -version | --version | --versio | --versi | --vers | -V) - ac_init_version=: ;; - - -with-* | --with-*) - ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid package name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"with_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval with_$ac_useropt=\$ac_optarg ;; - - -without-* | --without-*) - ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid package name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"with_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval with_$ac_useropt=no ;; - - --x) - # Obsolete; use --with-x. - with_x=yes ;; - - -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ - | --x-incl | --x-inc | --x-in | --x-i) - ac_prev=x_includes ;; - -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ - | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) - x_includes=$ac_optarg ;; - - -x-libraries | --x-libraries | --x-librarie | --x-librari \ - | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) - ac_prev=x_libraries ;; - -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ - | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) - x_libraries=$ac_optarg ;; - - -*) as_fn_error $? "unrecognized option: \`$ac_option' -Try \`$0 --help' for more information" - ;; - - *=*) - ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` - # Reject names that are not valid shell variable names. - case $ac_envvar in #( - '' | [0-9]* | *[!_$as_cr_alnum]* ) - as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; - esac - eval $ac_envvar=\$ac_optarg - export $ac_envvar ;; - - *) - # FIXME: should be removed in autoconf 3.0. - $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 - expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && - $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 - : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} - ;; - - esac -done - -if test -n "$ac_prev"; then - ac_option=--`echo $ac_prev | sed 's/_/-/g'` - as_fn_error $? "missing argument to $ac_option" -fi - -if test -n "$ac_unrecognized_opts"; then - case $enable_option_checking in - no) ;; - fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; - *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; - esac -fi - -# Check all directory arguments for consistency. -for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ - datadir sysconfdir sharedstatedir localstatedir includedir \ - oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ - libdir localedir mandir -do - eval ac_val=\$$ac_var - # Remove trailing slashes. - case $ac_val in - */ ) - ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` - eval $ac_var=\$ac_val;; - esac - # Be sure to have absolute directory names. - case $ac_val in - [\\/$]* | ?:[\\/]* ) continue;; - NONE | '' ) case $ac_var in *prefix ) continue;; esac;; - esac - as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" -done - -# There might be people who depend on the old broken behavior: `$host' -# used to hold the argument of --host etc. -# FIXME: To remove some day. -build=$build_alias -host=$host_alias -target=$target_alias - -# FIXME: To remove some day. -if test "x$host_alias" != x; then - if test "x$build_alias" = x; then - cross_compiling=maybe - $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host. - If a cross compiler is detected then cross compile mode will be used" >&2 - elif test "x$build_alias" != "x$host_alias"; then - cross_compiling=yes - fi -fi - -ac_tool_prefix= -test -n "$host_alias" && ac_tool_prefix=$host_alias- - -test "$silent" = yes && exec 6>/dev/null - - -ac_pwd=`pwd` && test -n "$ac_pwd" && -ac_ls_di=`ls -di .` && -ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || - as_fn_error $? "working directory cannot be determined" -test "X$ac_ls_di" = "X$ac_pwd_ls_di" || - as_fn_error $? "pwd does not report name of working directory" - - -# Find the source files, if location was not specified. -if test -z "$srcdir"; then - ac_srcdir_defaulted=yes - # Try the directory containing this script, then the parent directory. - ac_confdir=`$as_dirname -- "$as_myself" || -$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_myself" : 'X\(//\)[^/]' \| \ - X"$as_myself" : 'X\(//\)$' \| \ - X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_myself" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - srcdir=$ac_confdir - if test ! -r "$srcdir/$ac_unique_file"; then - srcdir=.. - fi -else - ac_srcdir_defaulted=no -fi -if test ! -r "$srcdir/$ac_unique_file"; then - test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." - as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" -fi -ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" -ac_abs_confdir=`( - cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" - pwd)` -# When building in place, set srcdir=. -if test "$ac_abs_confdir" = "$ac_pwd"; then - srcdir=. -fi -# Remove unnecessary trailing slashes from srcdir. -# Double slashes in file names in object file debugging info -# mess up M-x gdb in Emacs. -case $srcdir in -*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; -esac -for ac_var in $ac_precious_vars; do - eval ac_env_${ac_var}_set=\${${ac_var}+set} - eval ac_env_${ac_var}_value=\$${ac_var} - eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} - eval ac_cv_env_${ac_var}_value=\$${ac_var} -done - -# -# Report the --help message. -# -if test "$ac_init_help" = "long"; then - # Omit some internal or obsolete options to make the list less imposing. - # This message is too long to be a string in the A/UX 3.1 sh. - cat <<_ACEOF -\`configure' configures openjdk version-0.1 to adapt to many kinds of systems. - -Usage: $0 [OPTION]... [VAR=VALUE]... - -To assign environment variables (e.g., CC, CFLAGS...), specify them as -VAR=VALUE. See below for descriptions of some of the useful variables. - -Defaults for the options are specified in brackets. - -Configuration: - -h, --help display this help and exit - --help=short display options specific to this package - --help=recursive display the short help of all the included packages - -V, --version display version information and exit - -q, --quiet, --silent do not print \`checking ...' messages - --cache-file=FILE cache test results in FILE [disabled] - -C, --config-cache alias for \`--cache-file=config.cache' - -n, --no-create do not create output files - --srcdir=DIR find the sources in DIR [configure dir or \`..'] - -Installation directories: - --prefix=PREFIX install architecture-independent files in PREFIX - [$ac_default_prefix] - --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX - [PREFIX] - -By default, \`make install' will install all the files in -\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify -an installation prefix other than \`$ac_default_prefix' using \`--prefix', -for instance \`--prefix=\$HOME'. - -For better control, use the options below. - -Fine tuning of the installation directories: - --bindir=DIR user executables [EPREFIX/bin] - --sbindir=DIR system admin executables [EPREFIX/sbin] - --libexecdir=DIR program executables [EPREFIX/libexec] - --sysconfdir=DIR read-only single-machine data [PREFIX/etc] - --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] - --localstatedir=DIR modifiable single-machine data [PREFIX/var] - --libdir=DIR object code libraries [EPREFIX/lib] - --includedir=DIR C header files [PREFIX/include] - --oldincludedir=DIR C header files for non-gcc [/usr/include] - --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] - --datadir=DIR read-only architecture-independent data [DATAROOTDIR] - --infodir=DIR info documentation [DATAROOTDIR/info] - --localedir=DIR locale-dependent data [DATAROOTDIR/locale] - --mandir=DIR man documentation [DATAROOTDIR/man] - --docdir=DIR documentation root [DATAROOTDIR/doc/openjdk] - --htmldir=DIR html documentation [DOCDIR] - --dvidir=DIR dvi documentation [DOCDIR] - --pdfdir=DIR pdf documentation [DOCDIR] - --psdir=DIR ps documentation [DOCDIR] -_ACEOF - - cat <<\_ACEOF - -X features: - --x-includes=DIR X include files are in DIR - --x-libraries=DIR X library files are in DIR - -System types: - --build=BUILD configure for building on BUILD [guessed] - --host=HOST cross-compile to build programs to run on HOST [BUILD] -_ACEOF -fi - -if test -n "$ac_init_help"; then - case $ac_init_help in - short | recursive ) echo "Configuration of openjdk version-0.1:";; - esac - cat <<\_ACEOF - -Optional Features: - --disable-option-checking ignore unrecognized --enable/--with options - --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) - --enable-FEATURE[=ARG] include FEATURE [ARG=yes] - --enable-openjdk-only build OpenJDK regardless of the presence of closed - repositories [disabled] - --enable-jigsaw build Jigsaw images (not yet available) [disabled] - --disable-headful build headful support (graphical UI support) - [enabled] - --enable-debug set the debug level to fastdebug (shorthand for - --with-debug-level=fastdebug) [disabled] - --enable-list-builddeps list all build dependencies known to the configure - script - --disable-ccache use ccache to speed up recompilations [enabled] - --disable-precompiled-headers - use precompiled headers when compiling C++ [enabled] - --enable-javac-server enable the shared javac server during the build - process [disabled] - --enable-javac-deps enable the dependency tracking between Java packages - [disabled] - --enable-javac-multi-core - compile Java packages concurrently [disabled] - --disable-macosx-runtime-support - disable the use of MacOSX Java runtime support - framework [enabled] - --enable-docs enable generation of Javadoc documentation - [disabled] - --disable-nimbus disable Nimbus L&F [enabled] - --disable-static-link-stdc++ - disable static linking of the C++ runtime on Linux - [enabled] - --enable-hotspot-test-in-build - enable running of Queens test after Hotspot build - (not yet available) [disabled] - -Optional Packages: - --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] - --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) - --with-data-model build 32-bit or 64-bit binaries (for platforms that - support it), e.g. --with-data-model=32 [guessed] - --with-num-cores number of cores in the build system, e.g. - --with-num-cores=8 [probed] - --with-memory-size memory (in MB) available in the build system, e.g. - --with-memory-size=1024 [probed] - --with-jdk-variant JDK variant to build (normal, embedded) [normal] - --with-jvm-variants JVM variants (separated by commas) to build (server, - client, kernel, zero, zeroshark) [server] - --with-debug-level set the debug level (release, fastdebug, slowdebug) - [release] - --with-msvcr100dll copy this msvcr100.dll into the built JDK - --with-builddeps-conf use this configuration file for the builddeps - --with-builddeps-server download and use build dependencies from this server - url, e.g. - --with-builddeps-server=ftp://example.com/dir - --with-builddeps-dir store downloaded build dependencies here - [d/localhome/builddeps] - --with-builddeps-group chgrp the downloaded build dependencies to this - group - --with-sys-root pass this sys-root to the compilers and linker - (useful if the sys-root encoded in the cross - compiler tools is incorrect) - --with-ccache-dir where to store ccache files [~/.ccache] - --with-boot-jdk path to Boot JDK (used to bootstrap build) [probed] - --with-add-source-root for each and every source directory, look in this - additional source root for the same directory; if it - exists and have files in it, include it in the build - --with-override-source-root - for each and every source directory, look in this - override source root for the same directory; if it - exists, use that directory instead and ignore the - directory in the original source root - --with-adds-and-overrides - use the subdirs 'adds' and 'overrides' in the - specified directory as add-source-root and - override-source-root - --with-override-langtools - use this langtools dir for the build - --with-override-corba use this corba dir for the build - --with-override-jaxp use this jaxp dir for the build - --with-override-jaxws use this jaxws dir for the build - --with-override-hotspot use this hotspot dir for the build - --with-override-jdk use this jdk dir for the build - --with-boot-jdk-jvmargs specify JVM arguments to be passed to all - invocations of the Boot JDK, overriding the default - values, e.g --with-boot-jdk-jvmargs="-Xmx8G - -enableassertions" - --with-server-java use this java binary for running the javac - background server and other long running java tasks - in the build process, e.g. - ---with-server-java="/opt/jrockit/bin/java -server" - --with-javac-server-cores - use at most this number of concurrent threads on the - javac server [probed] - --with-x use the X Window System - --with-cups specify prefix directory for the cups package - (expecting the libraries under PATH/lib and the - headers under PATH/include) - --with-cups-include specify directory for the cups include files - --with-cups-lib specify directory for the cups library - --with-freetype specify prefix directory for the freetype2 package - (expecting the libraries under PATH/lib and the - headers under PATH/include) - --with-alsa specify prefix directory for the alsa package - (expecting the libraries under PATH/lib and the - headers under PATH/include) - --with-alsa-include specify directory for the alsa include files - --with-alsa-lib specify directory for the alsa library - --with-pulse specify prefix directory for the pulseaudio package - (expecting the libraries under PATH/lib and the - headers under PATH/include) - --with-pulse-include specify directory for the pulseaudio include files - --with-pulse-lib specify directory for the pulseaudio library - --with-cacerts-file specify alternative cacerts file - -Some influential environment variables: - PKG_CONFIG path to pkg-config utility - CC C compiler command - CFLAGS C compiler flags - LDFLAGS linker flags, e.g. -L if you have libraries in a - nonstandard directory - LIBS libraries to pass to the linker, e.g. -l - CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if - you have headers in a nonstandard directory - CXX C++ compiler command - CXXFLAGS C++ compiler flags - OBJC Objective C compiler command - OBJCFLAGS Objective C compiler flags - CPP C preprocessor - CXXCPP C++ preprocessor - XMKMF Path to xmkmf, Makefile generator for X Window System - FREETYPE2_CFLAGS - C compiler flags for FREETYPE2, overriding pkg-config - FREETYPE2_LIBS - linker flags for FREETYPE2, overriding pkg-config - ALSA_CFLAGS C compiler flags for ALSA, overriding pkg-config - ALSA_LIBS linker flags for ALSA, overriding pkg-config - LIBPULSE_CFLAGS - C compiler flags for LIBPULSE, overriding pkg-config - LIBPULSE_LIBS - linker flags for LIBPULSE, overriding pkg-config - -Use these variables to override the choices made by `configure' or to help -it to find libraries and programs with nonstandard names/locations. - -Report bugs to . -_ACEOF -ac_status=$? -fi - -if test "$ac_init_help" = "recursive"; then - # If there are subdirs, report their specific --help. - for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue - test -d "$ac_dir" || - { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || - continue - ac_builddir=. - -case "$ac_dir" in -.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -*) - ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` - # A ".." for each directory in $ac_dir_suffix. - ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` - case $ac_top_builddir_sub in - "") ac_top_builddir_sub=. ac_top_build_prefix= ;; - *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; - esac ;; -esac -ac_abs_top_builddir=$ac_pwd -ac_abs_builddir=$ac_pwd$ac_dir_suffix -# for backward compatibility: -ac_top_builddir=$ac_top_build_prefix - -case $srcdir in - .) # We are building in place. - ac_srcdir=. - ac_top_srcdir=$ac_top_builddir_sub - ac_abs_top_srcdir=$ac_pwd ;; - [\\/]* | ?:[\\/]* ) # Absolute name. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir - ac_abs_top_srcdir=$srcdir ;; - *) # Relative name. - ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_build_prefix$srcdir - ac_abs_top_srcdir=$ac_pwd/$srcdir ;; -esac -ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - - cd "$ac_dir" || { ac_status=$?; continue; } - # Check for guested configure. - if test -f "$ac_srcdir/configure.gnu"; then - echo && - $SHELL "$ac_srcdir/configure.gnu" --help=recursive - elif test -f "$ac_srcdir/configure"; then - echo && - $SHELL "$ac_srcdir/configure" --help=recursive - else - $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 - fi || ac_status=$? - cd "$ac_pwd" || { ac_status=$?; break; } - done -fi - -test -n "$ac_init_help" && exit $ac_status -if $ac_init_version; then - cat <<\_ACEOF -openjdk configure version-0.1 -generated by GNU Autoconf 2.67 - -Copyright (C) 2010 Free Software Foundation, Inc. -This configure script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it. -_ACEOF - exit -fi - -## ------------------------ ## -## Autoconf initialization. ## -## ------------------------ ## - -# ac_fn_c_try_compile LINENO -# -------------------------- -# Try to compile conftest.$ac_ext, and return whether this succeeded. -ac_fn_c_try_compile () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - rm -f conftest.$ac_objext - if { { ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compile") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} - as_fn_set_status $ac_retval - -} # ac_fn_c_try_compile - -# ac_fn_cxx_try_compile LINENO -# ---------------------------- -# Try to compile conftest.$ac_ext, and return whether this succeeded. -ac_fn_cxx_try_compile () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - rm -f conftest.$ac_objext - if { { ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compile") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { - test -z "$ac_cxx_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} - as_fn_set_status $ac_retval - -} # ac_fn_cxx_try_compile - -# ac_fn_objc_try_compile LINENO -# ----------------------------- -# Try to compile conftest.$ac_ext, and return whether this succeeded. -ac_fn_objc_try_compile () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - rm -f conftest.$ac_objext - if { { ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compile") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { - test -z "$ac_objc_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} - as_fn_set_status $ac_retval - -} # ac_fn_objc_try_compile - -# ac_fn_c_try_cpp LINENO -# ---------------------- -# Try to preprocess conftest.$ac_ext, and return whether this succeeded. -ac_fn_c_try_cpp () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if { { ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } > conftest.i && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} - as_fn_set_status $ac_retval - -} # ac_fn_c_try_cpp - -# ac_fn_cxx_try_cpp LINENO -# ------------------------ -# Try to preprocess conftest.$ac_ext, and return whether this succeeded. -ac_fn_cxx_try_cpp () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if { { ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } > conftest.i && { - test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || - test ! -s conftest.err - }; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} - as_fn_set_status $ac_retval - -} # ac_fn_cxx_try_cpp - -# ac_fn_cxx_try_link LINENO -# ------------------------- -# Try to link conftest.$ac_ext, and return whether this succeeded. -ac_fn_cxx_try_link () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - rm -f conftest.$ac_objext conftest$ac_exeext - if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { - test -z "$ac_cxx_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information - # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would - # interfere with the next link command; also delete a directory that is - # left behind by Apple's compiler. We do this before executing the actions. - rm -rf conftest.dSYM conftest_ipa8_conftest.oo - eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} - as_fn_set_status $ac_retval - -} # ac_fn_cxx_try_link - -# ac_fn_cxx_try_run LINENO -# ------------------------ -# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes -# that executables *can* be run. -ac_fn_cxx_try_run () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' - { { case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; }; then : - ac_retval=0 -else - $as_echo "$as_me: program exited with status $ac_status" >&5 - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=$ac_status -fi - rm -rf conftest.dSYM conftest_ipa8_conftest.oo - eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} - as_fn_set_status $ac_retval - -} # ac_fn_cxx_try_run - -# ac_fn_cxx_compute_int LINENO EXPR VAR INCLUDES -# ---------------------------------------------- -# Tries to find the compile-time value of EXPR in a program that includes -# INCLUDES, setting VAR accordingly. Returns whether the value could be -# computed -ac_fn_cxx_compute_int () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if test "$cross_compiling" = yes; then - # Depending upon the size, compute the lo and hi bounds. -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -int -main () -{ -static int test_array [1 - 2 * !(($2) >= 0)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -if ac_fn_cxx_try_compile "$LINENO"; then : - ac_lo=0 ac_mid=0 - while :; do - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -int -main () -{ -static int test_array [1 - 2 * !(($2) <= $ac_mid)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -if ac_fn_cxx_try_compile "$LINENO"; then : - ac_hi=$ac_mid; break -else - as_fn_arith $ac_mid + 1 && ac_lo=$as_val - if test $ac_lo -le $ac_mid; then - ac_lo= ac_hi= - break - fi - as_fn_arith 2 '*' $ac_mid + 1 && ac_mid=$as_val -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - done -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -int -main () -{ -static int test_array [1 - 2 * !(($2) < 0)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -if ac_fn_cxx_try_compile "$LINENO"; then : - ac_hi=-1 ac_mid=-1 - while :; do - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -int -main () -{ -static int test_array [1 - 2 * !(($2) >= $ac_mid)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -if ac_fn_cxx_try_compile "$LINENO"; then : - ac_lo=$ac_mid; break -else - as_fn_arith '(' $ac_mid ')' - 1 && ac_hi=$as_val - if test $ac_mid -le $ac_hi; then - ac_lo= ac_hi= - break - fi - as_fn_arith 2 '*' $ac_mid && ac_mid=$as_val -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - done -else - ac_lo= ac_hi= -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -# Binary search between lo and hi bounds. -while test "x$ac_lo" != "x$ac_hi"; do - as_fn_arith '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo && ac_mid=$as_val - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -int -main () -{ -static int test_array [1 - 2 * !(($2) <= $ac_mid)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -if ac_fn_cxx_try_compile "$LINENO"; then : - ac_hi=$ac_mid -else - as_fn_arith '(' $ac_mid ')' + 1 && ac_lo=$as_val -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -done -case $ac_lo in #(( -?*) eval "$3=\$ac_lo"; ac_retval=0 ;; -'') ac_retval=1 ;; -esac - else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -static long int longval () { return $2; } -static unsigned long int ulongval () { return $2; } -#include -#include -int -main () -{ - - FILE *f = fopen ("conftest.val", "w"); - if (! f) - return 1; - if (($2) < 0) - { - long int i = longval (); - if (i != ($2)) - return 1; - fprintf (f, "%ld", i); - } - else - { - unsigned long int i = ulongval (); - if (i != ($2)) - return 1; - fprintf (f, "%lu", i); - } - /* Do not output a trailing newline, as this causes \r\n confusion - on some platforms. */ - return ferror (f) || fclose (f) != 0; - - ; - return 0; -} -_ACEOF -if ac_fn_cxx_try_run "$LINENO"; then : - echo >>conftest.val; read $3 &5 -$as_echo_n "checking for $2... " >&6; } -if eval "test \"\${$3+set}\"" = set; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -#include <$2> -_ACEOF -if ac_fn_cxx_try_compile "$LINENO"; then : - eval "$3=yes" -else - eval "$3=no" -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} - -} # ac_fn_cxx_check_header_compile - -# ac_fn_cxx_check_func LINENO FUNC VAR -# ------------------------------------ -# Tests whether FUNC exists, setting the cache variable VAR accordingly -ac_fn_cxx_check_func () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval "test \"\${$3+set}\"" = set; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -/* Define $2 to an innocuous variant, in case declares $2. - For example, HP-UX 11i declares gettimeofday. */ -#define $2 innocuous_$2 - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $2 (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef $2 - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char $2 (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_$2 || defined __stub___$2 -choke me -#endif - -int -main () -{ -return $2 (); - ; - return 0; -} -_ACEOF -if ac_fn_cxx_try_link "$LINENO"; then : - eval "$3=yes" -else - eval "$3=no" -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} - -} # ac_fn_cxx_check_func - -# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES -# ------------------------------------------------------- -# Tests whether HEADER exists, giving a warning if it cannot be compiled using -# the include files in INCLUDES and setting the cache variable VAR -# accordingly. -ac_fn_c_check_header_mongrel () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if eval "test \"\${$3+set}\"" = set; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval "test \"\${$3+set}\"" = set; then : - $as_echo_n "(cached) " >&6 -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -else - # Is the header compilable? -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5 -$as_echo_n "checking $2 usability... " >&6; } -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -#include <$2> -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_header_compiler=yes -else - ac_header_compiler=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5 -$as_echo "$ac_header_compiler" >&6; } - -# Is the header present? -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5 -$as_echo_n "checking $2 presence... " >&6; } -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include <$2> -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - ac_header_preproc=yes -else - ac_header_preproc=no -fi -rm -f conftest.err conftest.i conftest.$ac_ext -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5 -$as_echo "$ac_header_preproc" >&6; } - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #(( - yes:no: ) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5 -$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} - ;; - no:yes:* ) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5 -$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5 -$as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5 -$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5 -$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} -( $as_echo "## ----------------------------------------------- ## -## Report this to build-infra-dev@openjdk.java.net ## -## ----------------------------------------------- ##" - ) | sed "s/^/$as_me: WARNING: /" >&2 - ;; -esac - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval "test \"\${$3+set}\"" = set; then : - $as_echo_n "(cached) " >&6 -else - eval "$3=\$ac_header_compiler" -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -fi - eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} - -} # ac_fn_c_check_header_mongrel - -# ac_fn_cxx_check_header_mongrel LINENO HEADER VAR INCLUDES -# --------------------------------------------------------- -# Tests whether HEADER exists, giving a warning if it cannot be compiled using -# the include files in INCLUDES and setting the cache variable VAR -# accordingly. -ac_fn_cxx_check_header_mongrel () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if eval "test \"\${$3+set}\"" = set; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval "test \"\${$3+set}\"" = set; then : - $as_echo_n "(cached) " >&6 -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -else - # Is the header compilable? -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5 -$as_echo_n "checking $2 usability... " >&6; } -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -#include <$2> -_ACEOF -if ac_fn_cxx_try_compile "$LINENO"; then : - ac_header_compiler=yes -else - ac_header_compiler=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5 -$as_echo "$ac_header_compiler" >&6; } - -# Is the header present? -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5 -$as_echo_n "checking $2 presence... " >&6; } -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include <$2> -_ACEOF -if ac_fn_cxx_try_cpp "$LINENO"; then : - ac_header_preproc=yes -else - ac_header_preproc=no -fi -rm -f conftest.err conftest.i conftest.$ac_ext -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5 -$as_echo "$ac_header_preproc" >&6; } - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_cxx_preproc_warn_flag in #(( - yes:no: ) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5 -$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} - ;; - no:yes:* ) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5 -$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5 -$as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5 -$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5 -$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} -( $as_echo "## ----------------------------------------------- ## -## Report this to build-infra-dev@openjdk.java.net ## -## ----------------------------------------------- ##" - ) | sed "s/^/$as_me: WARNING: /" >&2 - ;; -esac - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval "test \"\${$3+set}\"" = set; then : - $as_echo_n "(cached) " >&6 -else - eval "$3=\$ac_header_compiler" -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -fi - eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} - -} # ac_fn_cxx_check_header_mongrel -cat >config.log <<_ACEOF -This file contains any messages produced by compilers while -running configure, to aid debugging if configure makes a mistake. - -It was created by openjdk $as_me version-0.1, which was -generated by GNU Autoconf 2.67. Invocation command line was - - $ $0 $@ - -_ACEOF -exec 5>>config.log -{ -cat <<_ASUNAME -## --------- ## -## Platform. ## -## --------- ## - -hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` -uname -m = `(uname -m) 2>/dev/null || echo unknown` -uname -r = `(uname -r) 2>/dev/null || echo unknown` -uname -s = `(uname -s) 2>/dev/null || echo unknown` -uname -v = `(uname -v) 2>/dev/null || echo unknown` - -/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` -/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` - -/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` -/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` -/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` -/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` -/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` -/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` -/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` - -_ASUNAME - -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - $as_echo "PATH: $as_dir" - done -IFS=$as_save_IFS - -} >&5 - -cat >&5 <<_ACEOF - - -## ----------- ## -## Core tests. ## -## ----------- ## - -_ACEOF - - -# Keep a trace of the command line. -# Strip out --no-create and --no-recursion so they do not pile up. -# Strip out --silent because we don't want to record it for future runs. -# Also quote any args containing shell meta-characters. -# Make two passes to allow for proper duplicate-argument suppression. -ac_configure_args= -ac_configure_args0= -ac_configure_args1= -ac_must_keep_next=false -for ac_pass in 1 2 -do - for ac_arg - do - case $ac_arg in - -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - continue ;; - *\'*) - ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - case $ac_pass in - 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; - 2) - as_fn_append ac_configure_args1 " '$ac_arg'" - if test $ac_must_keep_next = true; then - ac_must_keep_next=false # Got value, back to normal. - else - case $ac_arg in - *=* | --config-cache | -C | -disable-* | --disable-* \ - | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ - | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ - | -with-* | --with-* | -without-* | --without-* | --x) - case "$ac_configure_args0 " in - "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; - esac - ;; - -* ) ac_must_keep_next=true ;; - esac - fi - as_fn_append ac_configure_args " '$ac_arg'" - ;; - esac - done -done -{ ac_configure_args0=; unset ac_configure_args0;} -{ ac_configure_args1=; unset ac_configure_args1;} - -# When interrupted or exit'd, cleanup temporary files, and complete -# config.log. We remove comments because anyway the quotes in there -# would cause problems or look ugly. -# WARNING: Use '\'' to represent an apostrophe within the trap. -# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. -trap 'exit_status=$? - # Save into config.log some information that might help in debugging. - { - echo - - $as_echo "## ---------------- ## -## Cache variables. ## -## ---------------- ##" - echo - # The following way of writing the cache mishandles newlines in values, -( - for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do - eval ac_val=\$$ac_var - case $ac_val in #( - *${as_nl}*) - case $ac_var in #( - *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 -$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; - esac - case $ac_var in #( - _ | IFS | as_nl) ;; #( - BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( - *) { eval $ac_var=; unset $ac_var;} ;; - esac ;; - esac - done - (set) 2>&1 | - case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( - *${as_nl}ac_space=\ *) - sed -n \ - "s/'\''/'\''\\\\'\'''\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" - ;; #( - *) - sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" - ;; - esac | - sort -) - echo - - $as_echo "## ----------------- ## -## Output variables. ## -## ----------------- ##" - echo - for ac_var in $ac_subst_vars - do - eval ac_val=\$$ac_var - case $ac_val in - *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; - esac - $as_echo "$ac_var='\''$ac_val'\''" - done | sort - echo - - if test -n "$ac_subst_files"; then - $as_echo "## ------------------- ## -## File substitutions. ## -## ------------------- ##" - echo - for ac_var in $ac_subst_files - do - eval ac_val=\$$ac_var - case $ac_val in - *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; - esac - $as_echo "$ac_var='\''$ac_val'\''" - done | sort - echo - fi - - if test -s confdefs.h; then - $as_echo "## ----------- ## -## confdefs.h. ## -## ----------- ##" - echo - cat confdefs.h - echo - fi - test "$ac_signal" != 0 && - $as_echo "$as_me: caught signal $ac_signal" - $as_echo "$as_me: exit $exit_status" - } >&5 - rm -f core *.core core.conftest.* && - rm -f -r conftest* confdefs* conf$$* $ac_clean_files && - exit $exit_status -' 0 -for ac_signal in 1 2 13 15; do - trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal -done -ac_signal=0 - -# confdefs.h avoids OS command line length limits that DEFS can exceed. -rm -f -r conftest* confdefs.h - -$as_echo "/* confdefs.h */" > confdefs.h - -# Predefined preprocessor variables. - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_NAME "$PACKAGE_NAME" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_TARNAME "$PACKAGE_TARNAME" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_VERSION "$PACKAGE_VERSION" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_STRING "$PACKAGE_STRING" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_URL "$PACKAGE_URL" -_ACEOF - - -# Let the site file select an alternate cache file if it wants to. -# Prefer an explicitly selected file to automatically selected ones. -ac_site_file1=NONE -ac_site_file2=NONE -if test -n "$CONFIG_SITE"; then - # We do not want a PATH search for config.site. - case $CONFIG_SITE in #(( - -*) ac_site_file1=./$CONFIG_SITE;; - */*) ac_site_file1=$CONFIG_SITE;; - *) ac_site_file1=./$CONFIG_SITE;; - esac -elif test "x$prefix" != xNONE; then - ac_site_file1=$prefix/share/config.site - ac_site_file2=$prefix/etc/config.site -else - ac_site_file1=$ac_default_prefix/share/config.site - ac_site_file2=$ac_default_prefix/etc/config.site -fi -for ac_site_file in "$ac_site_file1" "$ac_site_file2" -do - test "x$ac_site_file" = xNONE && continue - if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 -$as_echo "$as_me: loading site script $ac_site_file" >&6;} - sed 's/^/| /' "$ac_site_file" >&5 - . "$ac_site_file" \ - || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "failed to load site script $ac_site_file -See \`config.log' for more details" "$LINENO" 5 ; } - fi -done - -if test -r "$cache_file"; then - # Some versions of bash will fail to source /dev/null (special files - # actually), so we avoid doing that. DJGPP emulates it as a regular file. - if test /dev/null != "$cache_file" && test -f "$cache_file"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 -$as_echo "$as_me: loading cache $cache_file" >&6;} - case $cache_file in - [\\/]* | ?:[\\/]* ) . "$cache_file";; - *) . "./$cache_file";; - esac - fi -else - { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 -$as_echo "$as_me: creating cache $cache_file" >&6;} - >$cache_file -fi - -# Check that the precious variables saved in the cache have kept the same -# value. -ac_cache_corrupted=false -for ac_var in $ac_precious_vars; do - eval ac_old_set=\$ac_cv_env_${ac_var}_set - eval ac_new_set=\$ac_env_${ac_var}_set - eval ac_old_val=\$ac_cv_env_${ac_var}_value - eval ac_new_val=\$ac_env_${ac_var}_value - case $ac_old_set,$ac_new_set in - set,) - { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 -$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,set) - { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 -$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,);; - *) - if test "x$ac_old_val" != "x$ac_new_val"; then - # differences in whitespace do not lead to failure. - ac_old_val_w=`echo x $ac_old_val` - ac_new_val_w=`echo x $ac_new_val` - if test "$ac_old_val_w" != "$ac_new_val_w"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 -$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} - ac_cache_corrupted=: - else - { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 -$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} - eval $ac_var=\$ac_old_val - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 -$as_echo "$as_me: former value: \`$ac_old_val'" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 -$as_echo "$as_me: current value: \`$ac_new_val'" >&2;} - fi;; - esac - # Pass precious variables to config.status. - if test "$ac_new_set" = set; then - case $ac_new_val in - *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; - *) ac_arg=$ac_var=$ac_new_val ;; - esac - case " $ac_configure_args " in - *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. - *) as_fn_append ac_configure_args " '$ac_arg'" ;; - esac - fi -done -if $ac_cache_corrupted; then - { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 -$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} - as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 -fi -## -------------------- ## -## Main body of script. ## -## -------------------- ## - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - - -ac_aux_dir= -for ac_dir in build-aux "$srcdir"/build-aux; do - if test -f "$ac_dir/install-sh"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install-sh -c" - break - elif test -f "$ac_dir/install.sh"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install.sh -c" - break - elif test -f "$ac_dir/shtool"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/shtool install -c" - break - fi -done -if test -z "$ac_aux_dir"; then - as_fn_error $? "cannot find install-sh, install.sh, or shtool in build-aux \"$srcdir\"/build-aux" "$LINENO" 5 -fi - -# These three variables are undocumented and unsupported, -# and are intended to be withdrawn in a future Autoconf release. -# They can cause serious problems if a builder's source tree is in a directory -# whose full name contains unusual characters. -ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. -ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. -ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. - - - -# pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*- -# -# Copyright © 2004 Scott James Remnant . -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# PKG_PROG_PKG_CONFIG([MIN-VERSION]) -# ---------------------------------- -# PKG_PROG_PKG_CONFIG - -# PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) -# -# Check to see whether a particular set of modules exists. Similar -# to PKG_CHECK_MODULES(), but does not set variables or print errors. -# -# -# Similar to PKG_CHECK_MODULES, make sure that the first instance of -# this or PKG_CHECK_MODULES is called, or make sure to call -# PKG_CHECK_EXISTS manually -# -------------------------------------------------------------- - - - -# _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES]) -# --------------------------------------------- -# _PKG_CONFIG - -# _PKG_SHORT_ERRORS_SUPPORTED -# ----------------------------- -# _PKG_SHORT_ERRORS_SUPPORTED - - -# PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND], -# [ACTION-IF-NOT-FOUND]) -# -# -# Note that if there is a possibility the first call to -# PKG_CHECK_MODULES might not happen, you should be sure to include an -# explicit call to PKG_PROG_PKG_CONFIG in your configure.ac -# -# -# -------------------------------------------------------------- -# PKG_CHECK_MODULES - -# -# Copyright (c) 2011, 2012, Oracle and/or its affiliates. All rights reserved. -# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. -# -# This code is free software; you can redistribute it and/or modify it -# under the terms of the GNU General Public License version 2 only, as -# published by the Free Software Foundation. Oracle designates this -# particular file as subject to the "Classpath" exception as provided -# by Oracle in the LICENSE file that accompanied this code. -# -# This code is distributed in the hope that it will be useful, but WITHOUT -# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -# version 2 for more details (a copy is included in the LICENSE file that -# accompanied this code). -# -# You should have received a copy of the GNU General Public License version -# 2 along with this work; if not, write to the Free Software Foundation, -# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. -# -# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA -# or visit www.oracle.com if you need additional information or have any -# questions. -# - - - - - - - - - -# -# Copyright (c) 2011, 2012, Oracle and/or its affiliates. All rights reserved. -# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. -# -# This code is free software; you can redistribute it and/or modify it -# under the terms of the GNU General Public License version 2 only, as -# published by the Free Software Foundation. Oracle designates this -# particular file as subject to the "Classpath" exception as provided -# by Oracle in the LICENSE file that accompanied this code. -# -# This code is distributed in the hope that it will be useful, but WITHOUT -# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -# version 2 for more details (a copy is included in the LICENSE file that -# accompanied this code). -# -# You should have received a copy of the GNU General Public License version -# 2 along with this work; if not, write to the Free Software Foundation, -# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. -# -# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA -# or visit www.oracle.com if you need additional information or have any -# questions. -# - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -# Fixes paths on windows hosts to be mixed mode short. - - - - -# -# Copyright (c) 2011, 2012, Oracle and/or its affiliates. All rights reserved. -# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. -# -# This code is free software; you can redistribute it and/or modify it -# under the terms of the GNU General Public License version 2 only, as -# published by the Free Software Foundation. Oracle designates this -# particular file as subject to the "Classpath" exception as provided -# by Oracle in the LICENSE file that accompanied this code. -# -# This code is distributed in the hope that it will be useful, but WITHOUT -# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -# version 2 for more details (a copy is included in the LICENSE file that -# accompanied this code). -# -# You should have received a copy of the GNU General Public License version -# 2 along with this work; if not, write to the Free Software Foundation, -# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. -# -# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA -# or visit www.oracle.com if you need additional information or have any -# questions. -# - - - - - -# -# Copyright (c) 2011, 2012, Oracle and/or its affiliates. All rights reserved. -# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. -# -# This code is free software; you can redistribute it and/or modify it -# under the terms of the GNU General Public License version 2 only, as -# published by the Free Software Foundation. Oracle designates this -# particular file as subject to the "Classpath" exception as provided -# by Oracle in the LICENSE file that accompanied this code. -# -# This code is distributed in the hope that it will be useful, but WITHOUT -# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -# version 2 for more details (a copy is included in the LICENSE file that -# accompanied this code). -# -# You should have received a copy of the GNU General Public License version -# 2 along with this work; if not, write to the Free Software Foundation, -# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. -# -# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA -# or visit www.oracle.com if you need additional information or have any -# questions. -# - -function prepare_help_system { - for ac_prog in apt-get yum port pkgutil pkgadd -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_PKGHANDLER+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$PKGHANDLER"; then - ac_cv_prog_PKGHANDLER="$PKGHANDLER" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_PKGHANDLER="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -PKGHANDLER=$ac_cv_prog_PKGHANDLER -if test -n "$PKGHANDLER"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PKGHANDLER" >&5 -$as_echo "$PKGHANDLER" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$PKGHANDLER" && break -done - -} - -function help_on_build_dependency { - # Print a helpful message on how to acquire the necessary build dependency. - # $1 is the help tag: freetyp2, cups, pulse, alsa etc - MISSING_DEPENDENCY=$1 - PKGHANDLER_COMMAND= - - case $PKGHANDLER in - apt-get) - apt_help $MISSING_DEPENDENCY ;; - yum) - yum_help $MISSING_DEPENDENCY ;; - port) - port_help $MISSING_DEPENDENCY ;; - pkgutil) - pkgutil_help $MISSING_DEPENDENCY ;; - pkgadd) - pkgadd_help $MISSING_DEPENDENCY ;; - * ) - break ;; - esac - - if test "x$PKGHANDLER_COMMAND" != x; then - HELP_MSG="You might be able to fix this by running '$PKGHANDLER_COMMAND'." - fi -} - -function apt_help { - case $1 in - devkit) - PKGHANDLER_COMMAND="sudo apt-get install build-essential" ;; - openjdk) - PKGHANDLER_COMMAND="sudo apt-get install openjdk-7-jdk" ;; - alsa) - PKGHANDLER_COMMAND="sudo apt-get install libasound2-dev" ;; - cups) - PKGHANDLER_COMMAND="sudo apt-get install libcups2-dev" ;; - freetype2) - PKGHANDLER_COMMAND="sudo apt-get install libfreetype6-dev" ;; - pulse) - PKGHANDLER_COMMAND="sudo apt-get install libpulse-dev" ;; - x11) - PKGHANDLER_COMMAND="sudo apt-get install libX11-dev libxext-dev libxrender-dev libxtst-dev" ;; - ccache) - PKGHANDLER_COMMAND="sudo apt-get install ccache" ;; - * ) - break ;; - esac -} - -function yum_help { - case $1 in - devkit) - PKGHANDLER_COMMAND="sudo yum groupinstall \"Development Tools\"" ;; - openjdk) - PKGHANDLER_COMMAND="sudo yum install java-1.7.0-openjdk" ;; - alsa) - PKGHANDLER_COMMAND="sudo yum install alsa-lib-devel" ;; - cups) - PKGHANDLER_COMMAND="sudo yum install cups-devel" ;; - freetype2) - PKGHANDLER_COMMAND="sudo yum install freetype2-devel" ;; - pulse) - PKGHANDLER_COMMAND="sudo yum install pulseaudio-libs-devel" ;; - x11) - PKGHANDLER_COMMAND="sudo yum install libXtst-devel" ;; - ccache) - PKGHANDLER_COMMAND="sudo yum install ccache" ;; - * ) - break ;; - esac -} - -function port_help { - PKGHANDLER_COMMAND="" -} - -function pkgutil_help { - PKGHANDLER_COMMAND="" -} - -function pkgadd_help { - PKGHANDLER_COMMAND="" -} - - -# Save the command line. Do this very early, before it is lost by calling autoconf macros. -CONFIGURE_COMMAND_LINE="$@" - - -# Locate the directory of this script. -SCRIPT="$0" - - if test "x$BUILD_OS" != xwindows; then - # Follow a chain of symbolic links. Use readlink - # where it exists, else fall back to horribly - # complicated shell code. - # Extract the first word of "readlink", so it can be a program name with args. -set dummy readlink; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_READLINK+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - case $READLINK in - [\\/]* | ?:[\\/]*) - ac_cv_path_READLINK="$READLINK" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_READLINK="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -READLINK=$ac_cv_path_READLINK -if test -n "$READLINK"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $READLINK" >&5 -$as_echo "$READLINK" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - if test "x$READLINK_TESTED" != yes; then - # On MacOSX there is a readlink tool with a different - # purpose than the GNU readlink tool. Check the found readlink. - ISGNU=`$READLINK --help 2>&1 | grep GNU` - if test "x$ISGNU" = x; then - # A readlink that we do not know how to use. - # Are there other non-GNU readlinks out there? - READLINK_TESTED=yes - READLINK= - fi - fi - - if test "x$READLINK" != x; then - SCRIPT=`$READLINK -f $SCRIPT` - else - STARTDIR=$PWD - COUNTER=0 - DIR=`dirname $SCRIPT` - FIL=`basename $SCRIPT` - while test $COUNTER -lt 20; do - ISLINK=`ls -l $DIR/$FIL | grep '\->' | sed -e 's/.*-> \(.*\)/\1/'` - if test "x$ISLINK" == x; then - # This is not a symbolic link! We are done! - break - fi - # The link might be relative! We have to use cd to travel safely. - cd $DIR - cd `dirname $ISLINK` - DIR=`pwd` - FIL=`basename $ISLINK` - let COUNTER=COUNTER+1 - done - cd $STARTDIR - SCRIPT=$DIR/$FIL - fi - fi - -AUTOCONF_DIR=`dirname $0` - -# Start with tools that do not need have cross compilation support -# and can be expected to be found in the default PATH. These tools are -# used by configure. Nor are these tools expected to be found in the -# devkit from the builddeps server either, since they are -# needed to download the devkit. -for ac_prog in gawk mawk nawk awk -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_AWK+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$AWK"; then - ac_cv_prog_AWK="$AWK" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_AWK="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -AWK=$ac_cv_prog_AWK -if test -n "$AWK"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 -$as_echo "$AWK" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$AWK" && break -done - - - # Test that variable AWK is not empty. - if test "" = "$AWK"; then as_fn_error $? "Could not find awk !" "$LINENO" 5 ; fi - -# Extract the first word of "cat", so it can be a program name with args. -set dummy cat; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_CAT+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - case $CAT in - [\\/]* | ?:[\\/]*) - ac_cv_path_CAT="$CAT" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_CAT="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -CAT=$ac_cv_path_CAT -if test -n "$CAT"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CAT" >&5 -$as_echo "$CAT" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - - # Test that variable CAT is not empty. - if test "" = "$CAT"; then as_fn_error $? "Could not find cat !" "$LINENO" 5 ; fi - -# Extract the first word of "chmod", so it can be a program name with args. -set dummy chmod; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_CHMOD+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - case $CHMOD in - [\\/]* | ?:[\\/]*) - ac_cv_path_CHMOD="$CHMOD" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_CHMOD="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -CHMOD=$ac_cv_path_CHMOD -if test -n "$CHMOD"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CHMOD" >&5 -$as_echo "$CHMOD" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - - # Test that variable CHMOD is not empty. - if test "" = "$CHMOD"; then as_fn_error $? "Could not find chmod !" "$LINENO" 5 ; fi - -# Extract the first word of "cp", so it can be a program name with args. -set dummy cp; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_CP+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - case $CP in - [\\/]* | ?:[\\/]*) - ac_cv_path_CP="$CP" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_CP="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -CP=$ac_cv_path_CP -if test -n "$CP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CP" >&5 -$as_echo "$CP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - - # Test that variable CP is not empty. - if test "" = "$CP"; then as_fn_error $? "Could not find cp !" "$LINENO" 5 ; fi - -# Extract the first word of "cpio", so it can be a program name with args. -set dummy cpio; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_CPIO+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - case $CPIO in - [\\/]* | ?:[\\/]*) - ac_cv_path_CPIO="$CPIO" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_CPIO="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -CPIO=$ac_cv_path_CPIO -if test -n "$CPIO"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPIO" >&5 -$as_echo "$CPIO" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - - # Test that variable CPIO is not empty. - if test "" = "$CPIO"; then as_fn_error $? "Could not find cpio !" "$LINENO" 5 ; fi - -# Extract the first word of "cut", so it can be a program name with args. -set dummy cut; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_CUT+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - case $CUT in - [\\/]* | ?:[\\/]*) - ac_cv_path_CUT="$CUT" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_CUT="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -CUT=$ac_cv_path_CUT -if test -n "$CUT"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CUT" >&5 -$as_echo "$CUT" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - - # Test that variable CUT is not empty. - if test "" = "$CUT"; then as_fn_error $? "Could not find cut !" "$LINENO" 5 ; fi - -# Extract the first word of "date", so it can be a program name with args. -set dummy date; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_DATE+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - case $DATE in - [\\/]* | ?:[\\/]*) - ac_cv_path_DATE="$DATE" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_DATE="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -DATE=$ac_cv_path_DATE -if test -n "$DATE"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DATE" >&5 -$as_echo "$DATE" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - - # Test that variable DATE is not empty. - if test "" = "$DATE"; then as_fn_error $? "Could not find date !" "$LINENO" 5 ; fi - -# Extract the first word of "df", so it can be a program name with args. -set dummy df; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_DF+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - case $DF in - [\\/]* | ?:[\\/]*) - ac_cv_path_DF="$DF" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_DF="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -DF=$ac_cv_path_DF -if test -n "$DF"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DF" >&5 -$as_echo "$DF" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - - # Test that variable DF is not empty. - if test "" = "$DF"; then as_fn_error $? "Could not find df !" "$LINENO" 5 ; fi - -# Extract the first word of "diff", so it can be a program name with args. -set dummy diff; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_DIFF+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - case $DIFF in - [\\/]* | ?:[\\/]*) - ac_cv_path_DIFF="$DIFF" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_DIFF="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -DIFF=$ac_cv_path_DIFF -if test -n "$DIFF"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DIFF" >&5 -$as_echo "$DIFF" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - - # Test that variable DIFF is not empty. - if test "" = "$DIFF"; then as_fn_error $? "Could not find diff !" "$LINENO" 5 ; fi - -# Warning echo is really, really unportable!!!!! Different -# behaviour in bash and dash and in a lot of other shells! -# Use printf for serious work! -# Extract the first word of "echo", so it can be a program name with args. -set dummy echo; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_ECHO+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - case $ECHO in - [\\/]* | ?:[\\/]*) - ac_cv_path_ECHO="$ECHO" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_ECHO="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -ECHO=$ac_cv_path_ECHO -if test -n "$ECHO"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ECHO" >&5 -$as_echo "$ECHO" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - - # Test that variable ECHO is not empty. - if test "" = "$ECHO"; then as_fn_error $? "Could not find echo !" "$LINENO" 5 ; fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 -$as_echo_n "checking for grep that handles long lines and -e... " >&6; } -if test "${ac_cv_path_GREP+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -z "$GREP"; then - ac_path_GREP_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in grep ggrep; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" - { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue -# Check for GNU ac_path_GREP and select it if it is found. - # Check for GNU $ac_path_GREP -case `"$ac_path_GREP" --version 2>&1` in -*GNU*) - ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; -*) - ac_count=0 - $as_echo_n 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - $as_echo 'GREP' >> "conftest.nl" - "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_GREP_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_GREP="$ac_path_GREP" - ac_path_GREP_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_GREP_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_GREP"; then - as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 - fi -else - ac_cv_path_GREP=$GREP -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 -$as_echo "$ac_cv_path_GREP" >&6; } - GREP="$ac_cv_path_GREP" - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 -$as_echo_n "checking for egrep... " >&6; } -if test "${ac_cv_path_EGREP+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 - then ac_cv_path_EGREP="$GREP -E" - else - if test -z "$EGREP"; then - ac_path_EGREP_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in egrep; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" - { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue -# Check for GNU ac_path_EGREP and select it if it is found. - # Check for GNU $ac_path_EGREP -case `"$ac_path_EGREP" --version 2>&1` in -*GNU*) - ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; -*) - ac_count=0 - $as_echo_n 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - $as_echo 'EGREP' >> "conftest.nl" - "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_EGREP_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_EGREP="$ac_path_EGREP" - ac_path_EGREP_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_EGREP_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_EGREP"; then - as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 - fi -else - ac_cv_path_EGREP=$EGREP -fi - - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 -$as_echo "$ac_cv_path_EGREP" >&6; } - EGREP="$ac_cv_path_EGREP" - - - - # Test that variable EGREP is not empty. - if test "" = "$EGREP"; then as_fn_error $? "Could not find egrep !" "$LINENO" 5 ; fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5 -$as_echo_n "checking for fgrep... " >&6; } -if test "${ac_cv_path_FGREP+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1 - then ac_cv_path_FGREP="$GREP -F" - else - if test -z "$FGREP"; then - ac_path_FGREP_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in fgrep; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext" - { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue -# Check for GNU ac_path_FGREP and select it if it is found. - # Check for GNU $ac_path_FGREP -case `"$ac_path_FGREP" --version 2>&1` in -*GNU*) - ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;; -*) - ac_count=0 - $as_echo_n 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - $as_echo 'FGREP' >> "conftest.nl" - "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_FGREP_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_FGREP="$ac_path_FGREP" - ac_path_FGREP_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_FGREP_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_FGREP"; then - as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 - fi -else - ac_cv_path_FGREP=$FGREP -fi - - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5 -$as_echo "$ac_cv_path_FGREP" >&6; } - FGREP="$ac_cv_path_FGREP" - - - - # Test that variable FGREP is not empty. - if test "" = "$FGREP"; then as_fn_error $? "Could not find fgrep !" "$LINENO" 5 ; fi - - -# Extract the first word of "find", so it can be a program name with args. -set dummy find; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_FIND+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - case $FIND in - [\\/]* | ?:[\\/]*) - ac_cv_path_FIND="$FIND" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_FIND="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -FIND=$ac_cv_path_FIND -if test -n "$FIND"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $FIND" >&5 -$as_echo "$FIND" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - - # Test that variable FIND is not empty. - if test "" = "$FIND"; then as_fn_error $? "Could not find find !" "$LINENO" 5 ; fi - - - # Test if find supports -delete - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if find supports -delete" >&5 -$as_echo_n "checking if find supports -delete... " >&6; } - FIND_DELETE="-delete" - - DELETEDIR=`mktemp -d tmp.XXXXXXXXXX` || (echo Could not create temporary directory!; exit $?) - - echo Hejsan > $DELETEDIR/TestIfFindSupportsDelete - - TEST_DELETE=`$FIND "$DELETEDIR" -name TestIfFindSupportsDelete $FIND_DELETE 2>&1` - if test -f $DELETEDIR/TestIfFindSupportsDelete; then - # No, it does not. - rm $DELETEDIR/TestIfFindSupportsDelete - FIND_DELETE="-exec rm \{\} \+" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - fi - rmdir $DELETEDIR - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 -$as_echo_n "checking for grep that handles long lines and -e... " >&6; } -if test "${ac_cv_path_GREP+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -z "$GREP"; then - ac_path_GREP_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in grep ggrep; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" - { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue -# Check for GNU ac_path_GREP and select it if it is found. - # Check for GNU $ac_path_GREP -case `"$ac_path_GREP" --version 2>&1` in -*GNU*) - ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; -*) - ac_count=0 - $as_echo_n 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - $as_echo 'GREP' >> "conftest.nl" - "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_GREP_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_GREP="$ac_path_GREP" - ac_path_GREP_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_GREP_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_GREP"; then - as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 - fi -else - ac_cv_path_GREP=$GREP -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 -$as_echo "$ac_cv_path_GREP" >&6; } - GREP="$ac_cv_path_GREP" - - - - # Test that variable GREP is not empty. - if test "" = "$GREP"; then as_fn_error $? "Could not find grep !" "$LINENO" 5 ; fi - -# Extract the first word of "head", so it can be a program name with args. -set dummy head; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_HEAD+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - case $HEAD in - [\\/]* | ?:[\\/]*) - ac_cv_path_HEAD="$HEAD" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_HEAD="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -HEAD=$ac_cv_path_HEAD -if test -n "$HEAD"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $HEAD" >&5 -$as_echo "$HEAD" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - - # Test that variable HEAD is not empty. - if test "" = "$HEAD"; then as_fn_error $? "Could not find head !" "$LINENO" 5 ; fi - -# Extract the first word of "ln", so it can be a program name with args. -set dummy ln; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_LN+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - case $LN in - [\\/]* | ?:[\\/]*) - ac_cv_path_LN="$LN" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_LN="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -LN=$ac_cv_path_LN -if test -n "$LN"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LN" >&5 -$as_echo "$LN" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - - # Test that variable LN is not empty. - if test "" = "$LN"; then as_fn_error $? "Could not find ln !" "$LINENO" 5 ; fi - -# Extract the first word of "ls", so it can be a program name with args. -set dummy ls; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_LS+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - case $LS in - [\\/]* | ?:[\\/]*) - ac_cv_path_LS="$LS" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_LS="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -LS=$ac_cv_path_LS -if test -n "$LS"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LS" >&5 -$as_echo "$LS" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - - # Test that variable LS is not empty. - if test "" = "$LS"; then as_fn_error $? "Could not find ls !" "$LINENO" 5 ; fi - -for ac_prog in gmake make -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_MAKE+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - case $MAKE in - [\\/]* | ?:[\\/]*) - ac_cv_path_MAKE="$MAKE" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_MAKE="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -MAKE=$ac_cv_path_MAKE -if test -n "$MAKE"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAKE" >&5 -$as_echo "$MAKE" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$MAKE" && break -done - - - # Test that variable MAKE is not empty. - if test "" = "$MAKE"; then as_fn_error $? "Could not find make !" "$LINENO" 5 ; fi - -MAKE_VERSION=`$MAKE --version | head -n 1 | grep '3.8[12346789]'` -if test "x$MAKE_VERSION" = x; then - as_fn_error $? "You must use GNU make 3.81 or newer! Please put it in the path." "$LINENO" 5 -fi -# Extract the first word of "mkdir", so it can be a program name with args. -set dummy mkdir; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_MKDIR+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - case $MKDIR in - [\\/]* | ?:[\\/]*) - ac_cv_path_MKDIR="$MKDIR" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_MKDIR="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -MKDIR=$ac_cv_path_MKDIR -if test -n "$MKDIR"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR" >&5 -$as_echo "$MKDIR" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - - # Test that variable MKDIR is not empty. - if test "" = "$MKDIR"; then as_fn_error $? "Could not find mkdir !" "$LINENO" 5 ; fi - -# Extract the first word of "mv", so it can be a program name with args. -set dummy mv; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_MV+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - case $MV in - [\\/]* | ?:[\\/]*) - ac_cv_path_MV="$MV" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_MV="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -MV=$ac_cv_path_MV -if test -n "$MV"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MV" >&5 -$as_echo "$MV" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - - # Test that variable MV is not empty. - if test "" = "$MV"; then as_fn_error $? "Could not find mv !" "$LINENO" 5 ; fi - -for ac_prog in nawk gawk awk -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_NAWK+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - case $NAWK in - [\\/]* | ?:[\\/]*) - ac_cv_path_NAWK="$NAWK" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_NAWK="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -NAWK=$ac_cv_path_NAWK -if test -n "$NAWK"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NAWK" >&5 -$as_echo "$NAWK" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$NAWK" && break -done - - - # Test that variable NAWK is not empty. - if test "" = "$NAWK"; then as_fn_error $? "Could not find nawk !" "$LINENO" 5 ; fi - -# Extract the first word of "printf", so it can be a program name with args. -set dummy printf; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_PRINTF+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - case $PRINTF in - [\\/]* | ?:[\\/]*) - ac_cv_path_PRINTF="$PRINTF" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_PRINTF="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -PRINTF=$ac_cv_path_PRINTF -if test -n "$PRINTF"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PRINTF" >&5 -$as_echo "$PRINTF" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - - # Test that variable PRINTF is not empty. - if test "" = "$PRINTF"; then as_fn_error $? "Could not find printf !" "$LINENO" 5 ; fi - -# Extract the first word of "pwd", so it can be a program name with args. -set dummy pwd; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_THEPWDCMD+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - case $THEPWDCMD in - [\\/]* | ?:[\\/]*) - ac_cv_path_THEPWDCMD="$THEPWDCMD" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_THEPWDCMD="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -THEPWDCMD=$ac_cv_path_THEPWDCMD -if test -n "$THEPWDCMD"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $THEPWDCMD" >&5 -$as_echo "$THEPWDCMD" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -# Extract the first word of "rm", so it can be a program name with args. -set dummy rm; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_RM+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - case $RM in - [\\/]* | ?:[\\/]*) - ac_cv_path_RM="$RM" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_RM="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -RM=$ac_cv_path_RM -if test -n "$RM"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RM" >&5 -$as_echo "$RM" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - - # Test that variable RM is not empty. - if test "" = "$RM"; then as_fn_error $? "Could not find rm !" "$LINENO" 5 ; fi - -RM="$RM -f" -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5 -$as_echo_n "checking for a sed that does not truncate output... " >&6; } -if test "${ac_cv_path_SED+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ - for ac_i in 1 2 3 4 5 6 7; do - ac_script="$ac_script$as_nl$ac_script" - done - echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed - { ac_script=; unset ac_script;} - if test -z "$SED"; then - ac_path_SED_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in sed gsed; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_SED="$as_dir/$ac_prog$ac_exec_ext" - { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue -# Check for GNU ac_path_SED and select it if it is found. - # Check for GNU $ac_path_SED -case `"$ac_path_SED" --version 2>&1` in -*GNU*) - ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;; -*) - ac_count=0 - $as_echo_n 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - $as_echo '' >> "conftest.nl" - "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_SED_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_SED="$ac_path_SED" - ac_path_SED_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_SED_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_SED"; then - as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5 - fi -else - ac_cv_path_SED=$SED -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5 -$as_echo "$ac_cv_path_SED" >&6; } - SED="$ac_cv_path_SED" - rm -f conftest.sed - - - # Test that variable SED is not empty. - if test "" = "$SED"; then as_fn_error $? "Could not find sed !" "$LINENO" 5 ; fi - -# Extract the first word of "sh", so it can be a program name with args. -set dummy sh; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_SH+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - case $SH in - [\\/]* | ?:[\\/]*) - ac_cv_path_SH="$SH" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_SH="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -SH=$ac_cv_path_SH -if test -n "$SH"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $SH" >&5 -$as_echo "$SH" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - - # Test that variable SH is not empty. - if test "" = "$SH"; then as_fn_error $? "Could not find sh !" "$LINENO" 5 ; fi - -# Extract the first word of "sort", so it can be a program name with args. -set dummy sort; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_SORT+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - case $SORT in - [\\/]* | ?:[\\/]*) - ac_cv_path_SORT="$SORT" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_SORT="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -SORT=$ac_cv_path_SORT -if test -n "$SORT"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $SORT" >&5 -$as_echo "$SORT" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - - # Test that variable SORT is not empty. - if test "" = "$SORT"; then as_fn_error $? "Could not find sort !" "$LINENO" 5 ; fi - -# Extract the first word of "tar", so it can be a program name with args. -set dummy tar; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_TAR+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - case $TAR in - [\\/]* | ?:[\\/]*) - ac_cv_path_TAR="$TAR" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_TAR="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -TAR=$ac_cv_path_TAR -if test -n "$TAR"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $TAR" >&5 -$as_echo "$TAR" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - - # Test that variable TAR is not empty. - if test "" = "$TAR"; then as_fn_error $? "Could not find tar !" "$LINENO" 5 ; fi - -# Extract the first word of "tail", so it can be a program name with args. -set dummy tail; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_TAIL+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - case $TAIL in - [\\/]* | ?:[\\/]*) - ac_cv_path_TAIL="$TAIL" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_TAIL="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -TAIL=$ac_cv_path_TAIL -if test -n "$TAIL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $TAIL" >&5 -$as_echo "$TAIL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - - # Test that variable TAIL is not empty. - if test "" = "$TAIL"; then as_fn_error $? "Could not find tail !" "$LINENO" 5 ; fi - -# Extract the first word of "tee", so it can be a program name with args. -set dummy tee; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_TEE+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - case $TEE in - [\\/]* | ?:[\\/]*) - ac_cv_path_TEE="$TEE" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_TEE="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -TEE=$ac_cv_path_TEE -if test -n "$TEE"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $TEE" >&5 -$as_echo "$TEE" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - - # Test that variable TEE is not empty. - if test "" = "$TEE"; then as_fn_error $? "Could not find tee !" "$LINENO" 5 ; fi - -# Extract the first word of "tr", so it can be a program name with args. -set dummy tr; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_TR+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - case $TR in - [\\/]* | ?:[\\/]*) - ac_cv_path_TR="$TR" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_TR="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -TR=$ac_cv_path_TR -if test -n "$TR"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $TR" >&5 -$as_echo "$TR" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - - # Test that variable TR is not empty. - if test "" = "$TR"; then as_fn_error $? "Could not find tr !" "$LINENO" 5 ; fi - -# Extract the first word of "touch", so it can be a program name with args. -set dummy touch; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_TOUCH+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - case $TOUCH in - [\\/]* | ?:[\\/]*) - ac_cv_path_TOUCH="$TOUCH" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_TOUCH="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -TOUCH=$ac_cv_path_TOUCH -if test -n "$TOUCH"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $TOUCH" >&5 -$as_echo "$TOUCH" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - - # Test that variable TOUCH is not empty. - if test "" = "$TOUCH"; then as_fn_error $? "Could not find touch !" "$LINENO" 5 ; fi - -# Extract the first word of "wc", so it can be a program name with args. -set dummy wc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_WC+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - case $WC in - [\\/]* | ?:[\\/]*) - ac_cv_path_WC="$WC" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_WC="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -WC=$ac_cv_path_WC -if test -n "$WC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $WC" >&5 -$as_echo "$WC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - - # Test that variable WC is not empty. - if test "" = "$WC"; then as_fn_error $? "Could not find wc !" "$LINENO" 5 ; fi - -# Extract the first word of "xargs", so it can be a program name with args. -set dummy xargs; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_XARGS+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - case $XARGS in - [\\/]* | ?:[\\/]*) - ac_cv_path_XARGS="$XARGS" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_XARGS="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -XARGS=$ac_cv_path_XARGS -if test -n "$XARGS"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $XARGS" >&5 -$as_echo "$XARGS" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - - # Test that variable XARGS is not empty. - if test "" = "$XARGS"; then as_fn_error $? "Could not find xargs !" "$LINENO" 5 ; fi - -# Extract the first word of "zip", so it can be a program name with args. -set dummy zip; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_ZIP+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - case $ZIP in - [\\/]* | ?:[\\/]*) - ac_cv_path_ZIP="$ZIP" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_ZIP="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -ZIP=$ac_cv_path_ZIP -if test -n "$ZIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ZIP" >&5 -$as_echo "$ZIP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - - # Test that variable ZIP is not empty. - if test "" = "$ZIP"; then as_fn_error $? "Could not find zip !" "$LINENO" 5 ; fi - -# Extract the first word of "unzip", so it can be a program name with args. -set dummy unzip; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_UNZIP+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - case $UNZIP in - [\\/]* | ?:[\\/]*) - ac_cv_path_UNZIP="$UNZIP" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_UNZIP="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -UNZIP=$ac_cv_path_UNZIP -if test -n "$UNZIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $UNZIP" >&5 -$as_echo "$UNZIP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - - # Test that variable UNZIP is not empty. - if test "" = "$UNZIP"; then as_fn_error $? "Could not find unzip !" "$LINENO" 5 ; fi - -# Extract the first word of "ldd", so it can be a program name with args. -set dummy ldd; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_LDD+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - case $LDD in - [\\/]* | ?:[\\/]*) - ac_cv_path_LDD="$LDD" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_LDD="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -LDD=$ac_cv_path_LDD -if test -n "$LDD"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LDD" >&5 -$as_echo "$LDD" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -if test "x$LDD" = "x"; then - # List shared lib dependencies is used for - # debug output and checking for forbidden dependencies. - # We can build without it. - LDD="true" -fi -# Extract the first word of "otool", so it can be a program name with args. -set dummy otool; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_OTOOL+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - case $OTOOL in - [\\/]* | ?:[\\/]*) - ac_cv_path_OTOOL="$OTOOL" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_OTOOL="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -OTOOL=$ac_cv_path_OTOOL -if test -n "$OTOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5 -$as_echo "$OTOOL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -if test "x$OTOOL" = "x"; then - OTOOL="true" -fi -# Extract the first word of "readelf", so it can be a program name with args. -set dummy readelf; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_READELF+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - case $READELF in - [\\/]* | ?:[\\/]*) - ac_cv_path_READELF="$READELF" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_READELF="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -READELF=$ac_cv_path_READELF -if test -n "$READELF"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $READELF" >&5 -$as_echo "$READELF" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -# Extract the first word of "expr", so it can be a program name with args. -set dummy expr; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_EXPR+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - case $EXPR in - [\\/]* | ?:[\\/]*) - ac_cv_path_EXPR="$EXPR" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_EXPR="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -EXPR=$ac_cv_path_EXPR -if test -n "$EXPR"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $EXPR" >&5 -$as_echo "$EXPR" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - - # Test that variable EXPR is not empty. - if test "" = "$EXPR"; then as_fn_error $? "Could not find expr !" "$LINENO" 5 ; fi - -# Extract the first word of "file", so it can be a program name with args. -set dummy file; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_FILE+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - case $FILE in - [\\/]* | ?:[\\/]*) - ac_cv_path_FILE="$FILE" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_FILE="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -FILE=$ac_cv_path_FILE -if test -n "$FILE"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $FILE" >&5 -$as_echo "$FILE" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - - # Test that variable FILE is not empty. - if test "" = "$FILE"; then as_fn_error $? "Could not find file !" "$LINENO" 5 ; fi - -# Extract the first word of "hg", so it can be a program name with args. -set dummy hg; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_HG+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - case $HG in - [\\/]* | ?:[\\/]*) - ac_cv_path_HG="$HG" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_HG="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -HG=$ac_cv_path_HG -if test -n "$HG"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $HG" >&5 -$as_echo "$HG" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - -# Figure out the build and host system. -# Make sure we can run config.sub. -$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || - as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5 - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5 -$as_echo_n "checking build system type... " >&6; } -if test "${ac_cv_build+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - ac_build_alias=$build_alias -test "x$ac_build_alias" = x && - ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` -test "x$ac_build_alias" = x && - as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5 -ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || - as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5 - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5 -$as_echo "$ac_cv_build" >&6; } -case $ac_cv_build in -*-*-*) ;; -*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5 ;; -esac -build=$ac_cv_build -ac_save_IFS=$IFS; IFS='-' -set x $ac_cv_build -shift -build_cpu=$1 -build_vendor=$2 -shift; shift -# Remember, the first character of IFS is used to create $*, -# except with old shells: -build_os=$* -IFS=$ac_save_IFS -case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5 -$as_echo_n "checking host system type... " >&6; } -if test "${ac_cv_host+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test "x$host_alias" = x; then - ac_cv_host=$ac_cv_build -else - ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || - as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5 -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5 -$as_echo "$ac_cv_host" >&6; } -case $ac_cv_host in -*-*-*) ;; -*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5 ;; -esac -host=$ac_cv_host -ac_save_IFS=$IFS; IFS='-' -set x $ac_cv_host -shift -host_cpu=$1 -host_vendor=$2 -shift; shift -# Remember, the first character of IFS is used to create $*, -# except with old shells: -host_os=$* -IFS=$ac_save_IFS -case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac - - - - -# Check whether --with-data-model was given. -if test "${with_data_model+set}" = set; then : - withval=$with_data_model; -fi - - -if test "x$with_data_model" != x && \ - test "x$with_data_model" != x32 && \ - test "x$with_data_model" != x64 ; then - as_fn_error $? "The data model can only be 32 or 64!" "$LINENO" 5 -fi -# Translate the standard cpu-vendor-kernel-os quadruplets into -# the new HOST_.... and BUILD_... and the legacy names used by -# the openjdk build. -# It uses $host_os $host_cpu $build_os $build_cpu and $with_data_model - - # Expects $host_os $host_cpu $build_os and $build_cpu - # and $with_data_model to have been setup! - # - # Translate the standard triplet(quadruplet) definition - # of the host/build system into - # HOST_OS=aix,bsd,hpux,linux,macosx,solaris,windows - # HOST_OS_FAMILY=bsd,gnu,sysv,win32,wince - # HOST_OS_API=posix,winapi - # - # HOST_CPU=ia32,x64,sparc,sparcv9,arm,arm64,ppc,ppc64 - # HOST_CPU_ARCH=x86,sparc,pcc,arm - # HOST_CPU_BITS=32,64 - # HOST_CPU_ENDIAN=big,little - # - # The same values are setup for BUILD_... - # - # And the legacy variables, for controlling the old makefiles. - # LEGACY_HOST_CPU1=i586,amd64/x86_64,sparc,sparcv9,arm,arm64... - # LEGACY_HOST_CPU2=i386,amd64,sparc,sparcv9,arm,arm64... - # LEGACY_HOST_CPU3=sparcv9,amd64 (but only on solaris) - # LEGACY_HOST_OS_API=solaris,windows - # - # We also copy the autoconf trip/quadruplet - # verbatim to HOST and BUILD - HOST=${host} - - BUILD=${build} - - - - - case "$host_os" in - *linux*) - VAR_OS=linux - VAR_OS_API=posix - VAR_OS_FAMILY=gnu - ;; - *solaris*) - VAR_OS=solaris - VAR_OS_API=posix - VAR_OS_FAMILY=sysv - ;; - *darwin*) - VAR_OS=macosx - VAR_OS_API=posix - VAR_OS_FAMILY=bsd - ;; - *bsd*) - VAR_OS=bsd - VAR_OS_API=posix - VAR_OS_FAMILY=bsd - ;; - *cygwin*|*windows*) - VAR_OS=windows - VAR_OS_API=winapi - VAR_OS_FAMILY=windows - ;; - *) - as_fn_error $? "unsupported host operating system $host_os" "$LINENO" 5 - ;; - esac - - HOST_OS="$VAR_OS" - HOST_OS_FAMILY="$VAR_OS_FAMILY" - HOST_OS_API="$VAR_OS_API" - - - - - - if test "x$HOST_OS_API" = xposix; then - LEGACY_HOST_OS_API="solaris" - fi - if test "x$HOST_OS_API" = xwinapi; then - LEGACY_HOST_OS_API="windows" - fi - - - - - # First argument is the cpu name from the trip/quad - case "$host_cpu" in - x86_64) - VAR_CPU=x64 - VAR_CPU_ARCH=x86 - VAR_CPU_BITS=64 - VAR_CPU_ENDIAN=little - VAR_LEGACY_CPU=amd64 - ;; - i?86) - VAR_CPU=ia32 - VAR_CPU_ARCH=x86 - VAR_CPU_BITS=32 - VAR_CPU_ENDIAN=little - VAR_LEGACY_CPU=i586 - ;; - alpha*) - VAR_CPU=alpha - VAR_CPU_ARCH=alpha - VAR_CPU_BITS=64 - VAR_CPU_ENDIAN=big - VAR_LEGACY_CPU=alpha - ;; - arm*) - VAR_CPU=arm - VAR_CPU_ARCH=arm - VAR_CPU_BITS=3264 - VAR_CPU_ENDIAN=big - VAR_LEGACY_CPU=arm - ;; - mips) - VAR_CPU=mips - VAR_CPU_ARCH=mips - VAR_CPU_BITS=woot - VAR_CPU_ENDIAN=woot - VAR_LEGACY_CPU=mips - ;; - mipsel) - VAR_CPU=mipsel - VAR_CPU_ARCH=mips - VAR_CPU_BITS=woot - VAR_CPU_ENDIAN=woot - VAR_LEGACY_CPU=mipsel - ;; - powerpc) - VAR_CPU=ppc - VAR_CPU_ARCH=ppc - VAR_CPU_BITS=32 - VAR_CPU_ENDIAN=big - VAR_LEGACY_CPU=ppc - ;; - powerpc64) - VAR_CPU=ppc64 - VAR_CPU_ARCH=ppc - VAR_CPU_BITS=64 - VAR_CPU_ENDIAN=32 - VAR_LEGACY_CPU=ppc64 - ;; - sparc) - VAR_CPU=sparc - VAR_CPU_ARCH=sparc - VAR_CPU_BITS=32 - VAR_CPU_ENDIAN=big - VAR_LEGACY_CPU=sparc - ;; - sparc64) - VAR_CPU=sparcv9 - VAR_CPU_ARCH=sparc - VAR_CPU_BITS=64 - VAR_CPU_ENDIAN=big - VAR_LEGACY_CPU=sparc_sparcv9 - ;; - s390) - VAR_CPU=s390 - VAR_CPU_ARCH=s390 - VAR_CPU_BITS=32 - VAR_CPU_ENDIAN=woot - VAR_LEGACY_CPU=s390 - VAR_LEGACY_CPU=s390 - ;; - s390x) - VAR_CPU=s390x - VAR_CPU_ARCH=s390 - VAR_CPU_BITS=64 - VAR_CPU_ENDIAN=woot - VAR_LEGACY_CPU=s390x - ;; - *) - as_fn_error $? "unsupported cpu $host_cpu" "$LINENO" 5 - ;; - esac - - # Workaround cygwin not knowing about 64 bit. - if test "x$VAR_OS" = "xwindows"; then - if test "x$PROCESSOR_IDENTIFIER" != "x"; then - PROC_ARCH=`echo $PROCESSOR_IDENTIFIER | $CUT -f1 -d' '` - case "$PROC_ARCH" in - intel64|Intel64|INTEL64|em64t|EM64T|amd64|AMD64|8664|x86_64) - VAR_CPU=x64 - VAR_CPU_BITS=64 - VAR_LEGACY_CPU=amd64 - ;; - esac - fi - fi - - if test "x$VAR_CPU_ARCH" = "xx86"; then - if test "x$with_data_model" = "x64"; then - VAR_CPU=x64 - VAR_CPU_BITS=64 - VAR_LEGACY_CPU=amd64 - fi - if test "x$with_data_model" = "x32"; then - VAR_CPU=ia32 - VAR_CPU_BITS=32 - VAR_LEGACY_CPU=i586 - fi - fi - - HOST_CPU="$VAR_CPU" - HOST_CPU_ARCH="$VAR_CPU_ARCH" - HOST_CPU_BITS="$VAR_CPU_BITS" - HOST_CPU_ENDIAN="$VAR_CPU_ENDIAN" - - - - - - - # Also store the legacy naming of the cpu. - # Ie i586 and amd64 instead of ia32 and x64 - LEGACY_HOST_CPU1="$VAR_LEGACY_CPU" - - - # And the second legacy naming of the cpu. - # Ie i386 and amd64 instead of ia32 and x64. - LEGACY_HOST_CPU2="$LEGACY_HOST_CPU1" - if test "x$LEGACY_HOST_CPU1" = xi586; then - LEGACY_HOST_CPU2=i386 - fi - - - # And the third legacy naming of the cpu. - # Ie only amd64 or sparcv9, used for the ISA_DIR on Solaris. - LEGACY_HOST_CPU3="" - if test "x$HOST_CPU" = xx64; then - LEGACY_HOST_CPU3=amd64 - fi - if test "x$HOST_CPU" = xsparcv9; then - LEGACY_HOST_CPU3=sparvc9 - fi - - - - - - case "$build_os" in - *linux*) - VAR_OS=linux - VAR_OS_API=posix - VAR_OS_FAMILY=gnu - ;; - *solaris*) - VAR_OS=solaris - VAR_OS_API=posix - VAR_OS_FAMILY=sysv - ;; - *darwin*) - VAR_OS=macosx - VAR_OS_API=posix - VAR_OS_FAMILY=bsd - ;; - *bsd*) - VAR_OS=bsd - VAR_OS_API=posix - VAR_OS_FAMILY=bsd - ;; - *cygwin*|*windows*) - VAR_OS=windows - VAR_OS_API=winapi - VAR_OS_FAMILY=windows - ;; - *) - as_fn_error $? "unsupported host operating system $build_os" "$LINENO" 5 - ;; - esac - - BUILD_OS="$VAR_OS" - BUILD_OS_FAMILY="$VAR_OS_FAMILY" - BUILD_OS_API="$VAR_OS_API" - - - - - - if test "x$BUILD_OS_API" = xposix; then - LEGACY_BUILD_OS_API="solaris" - fi - if test "x$BUILD_OS_API" = xwinapi; then - LEGACY_BUILD_OS_API="windows" - fi - - - - - # First argument is the cpu name from the trip/quad - case "$build_cpu" in - x86_64) - VAR_CPU=x64 - VAR_CPU_ARCH=x86 - VAR_CPU_BITS=64 - VAR_CPU_ENDIAN=little - VAR_LEGACY_CPU=amd64 - ;; - i?86) - VAR_CPU=ia32 - VAR_CPU_ARCH=x86 - VAR_CPU_BITS=32 - VAR_CPU_ENDIAN=little - VAR_LEGACY_CPU=i586 - ;; - alpha*) - VAR_CPU=alpha - VAR_CPU_ARCH=alpha - VAR_CPU_BITS=64 - VAR_CPU_ENDIAN=big - VAR_LEGACY_CPU=alpha - ;; - arm*) - VAR_CPU=arm - VAR_CPU_ARCH=arm - VAR_CPU_BITS=3264 - VAR_CPU_ENDIAN=big - VAR_LEGACY_CPU=arm - ;; - mips) - VAR_CPU=mips - VAR_CPU_ARCH=mips - VAR_CPU_BITS=woot - VAR_CPU_ENDIAN=woot - VAR_LEGACY_CPU=mips - ;; - mipsel) - VAR_CPU=mipsel - VAR_CPU_ARCH=mips - VAR_CPU_BITS=woot - VAR_CPU_ENDIAN=woot - VAR_LEGACY_CPU=mipsel - ;; - powerpc) - VAR_CPU=ppc - VAR_CPU_ARCH=ppc - VAR_CPU_BITS=32 - VAR_CPU_ENDIAN=big - VAR_LEGACY_CPU=ppc - ;; - powerpc64) - VAR_CPU=ppc64 - VAR_CPU_ARCH=ppc - VAR_CPU_BITS=64 - VAR_CPU_ENDIAN=32 - VAR_LEGACY_CPU=ppc64 - ;; - sparc) - VAR_CPU=sparc - VAR_CPU_ARCH=sparc - VAR_CPU_BITS=32 - VAR_CPU_ENDIAN=big - VAR_LEGACY_CPU=sparc - ;; - sparc64) - VAR_CPU=sparcv9 - VAR_CPU_ARCH=sparc - VAR_CPU_BITS=64 - VAR_CPU_ENDIAN=big - VAR_LEGACY_CPU=sparc_sparcv9 - ;; - s390) - VAR_CPU=s390 - VAR_CPU_ARCH=s390 - VAR_CPU_BITS=32 - VAR_CPU_ENDIAN=woot - VAR_LEGACY_CPU=s390 - VAR_LEGACY_CPU=s390 - ;; - s390x) - VAR_CPU=s390x - VAR_CPU_ARCH=s390 - VAR_CPU_BITS=64 - VAR_CPU_ENDIAN=woot - VAR_LEGACY_CPU=s390x - ;; - *) - as_fn_error $? "unsupported cpu $build_cpu" "$LINENO" 5 - ;; - esac - - # Workaround cygwin not knowing about 64 bit. - if test "x$VAR_OS" = "xwindows"; then - if test "x$PROCESSOR_IDENTIFIER" != "x"; then - PROC_ARCH=`echo $PROCESSOR_IDENTIFIER | $CUT -f1 -d' '` - case "$PROC_ARCH" in - intel64|Intel64|INTEL64|em64t|EM64T|amd64|AMD64|8664|x86_64) - VAR_CPU=x64 - VAR_CPU_BITS=64 - VAR_LEGACY_CPU=amd64 - ;; - esac - fi - fi - - if test "x$VAR_CPU_ARCH" = "xx86"; then - if test "x$with_data_model" = "x64"; then - VAR_CPU=x64 - VAR_CPU_BITS=64 - VAR_LEGACY_CPU=amd64 - fi - if test "x$with_data_model" = "x32"; then - VAR_CPU=ia32 - VAR_CPU_BITS=32 - VAR_LEGACY_CPU=i586 - fi - fi - - BUILD_CPU="$VAR_CPU" - BUILD_CPU_ARCH="$VAR_CPU_ARCH" - BUILD_CPU_BITS="$VAR_CPU_BITS" - BUILD_CPU_ENDIAN="$VAR_CPU_ENDIAN" - - - - - - - # Also store the legacy naming of the cpu. - # Ie i586 and amd64 instead of ia32 and x64 - LEGACY_BUILD_CPU1="$VAR_LEGACY_CPU" - - - # And the second legacy naming of the cpu. - # Ie i386 and amd64 instead of ia32 and x64. - LEGACY_BUILD_CPU2="$LEGACY_BUILD_CPU1" - if test "x$LEGACY_BUILD_CPU1" = xi586; then - LEGACY_BUILD_CPU2=i386 - fi - - - # And the third legacy naming of the cpu. - # Ie only amd64 or sparcv9, used for the ISA_DIR on Solaris. - LEGACY_BUILD_CPU3="" - if test "x$BUILD_CPU" = xx64; then - LEGACY_BUILD_CPU3=amd64 - fi - if test "x$BUILD_CPU" = xsparcv9; then - LEGACY_BUILD_CPU3=sparvc9 - fi - - - - if test "x$HOST_OS" != xsolaris; then - LEGACY_HOST_CPU3="" - LEGACY_BUILD_CPU3="" - fi - - # On MacOSX and MacOSX only, we have a different name for the x64 CPU in ARCH (LEGACY_HOST_CPU1) ... - if test "x$HOST_OS" = xmacosx && test "x$HOST_CPU" = xx64; then - LEGACY_HOST_CPU1="x86_64" - fi - - - if test "x$HOST_OS" = "xsolaris"; then - REQUIRED_OS_NAME=SunOS - REQUIRED_OS_VERSION=5.10 - fi - if test "x$HOST_OS" = "xlinux"; then - REQUIRED_OS_NAME=Linux - REQUIRED_OS_VERSION=2.6 - fi - if test "x$HOST_OS" = "xwindows"; then - REQUIRED_OS_NAME=Windows - REQUIRED_OS_VERSION=5.1 - fi - if test "x$HOST_OS" = "xmacosx"; then - REQUIRED_OS_NAME=Darwin - REQUIRED_OS_VERSION=11.2 - fi - - - - - -# Now the following vars are defined. -# HOST_OS=aix,bsd,hpux,linux,macosx,solaris,windows -# HOST_OS_FAMILY=bsd,gnu,sysv,win32,wince -# HOST_OS_API=posix,winapi -# -# HOST_CPU=ia32,x64,sparc,sparcv9,arm,arm64,ppc,ppc64 -# HOST_CPU_ARCH=x86,sparc,pcc,arm -# HOST_CPU_BITS=32,64 -# HOST_CPU_ENDIAN=big,little -# -# There is also a: -# LEGACY_HOST_CPU1=i586,amd64,.... # used to set the old var ARCH -# LEGACY_HOST_CPU2=i386,amd64,.... # used to set the old var LIBARCH -# LEGACY_HOST_CPU3=only sparcv9,amd64 # used to set the ISA_DIR on Solaris -# There was also a BUILDARCH that had i486,amd64,... but we do not use that -# in the new build. -# LEGACY_HOST_OS_API=solaris,windows # used to select source roots - -DATE_WHEN_CONFIGURED=`LANG=C date` - - -# How many cores do we have on this build system? - -# Check whether --with-num-cores was given. -if test "${with_num_cores+set}" = set; then : - withval=$with_num_cores; -fi - -if test "x$with_num_cores" = x; then - # The number of cores were not specified, try to probe them. - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for number of cores" >&5 -$as_echo_n "checking for number of cores... " >&6; } - NUM_CORES=1 - FOUND_CORES=no - - if test -f /proc/cpuinfo; then - # Looks like a Linux system - NUM_CORES=`cat /proc/cpuinfo | grep -c processor` - FOUND_CORES=yes - fi - - if test -x /usr/sbin/psrinfo; then - # Looks like a Solaris system - NUM_CORES=`LC_MESSAGES=C /usr/sbin/psrinfo -v | grep -c on-line` - FOUND_CORES=yes - fi - - if test -x /usr/sbin/system_profiler; then - # Looks like a MacOSX system - NUM_CORES=`/usr/sbin/system_profiler -detailLevel full SPHardwareDataType | grep 'Cores' | awk '{print $5}'` - FOUND_CORES=yes - fi - - if test "x$build_os" = xwindows; then - NUM_CORES=4 - fi - - # For c/c++ code we run twice as many concurrent build - # jobs than we have cores, otherwise we will stall on io. - CONCURRENT_BUILD_JOBS=`expr $NUM_CORES \* 2` - - if test "x$FOUND_CORES" = xyes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NUM_CORES" >&5 -$as_echo "$NUM_CORES" >&6; } - else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: could not detect number of cores, defaulting to 1!" >&5 -$as_echo "could not detect number of cores, defaulting to 1!" >&6; } - fi - - -else - NUM_CORES=$with_num_cores - CONCURRENT_BUILD_JOBS=`expr $NUM_CORES \* 2` -fi - - - -# How many cores do we have on this build system? - -# Check whether --with-memory-size was given. -if test "${with_memory_size+set}" = set; then : - withval=$with_memory_size; -fi - -if test "x$with_memory_size" = x; then - # The memory size was not specified, try to probe it. - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for memory size" >&5 -$as_echo_n "checking for memory size... " >&6; } - # Default to 1024MB - MEMORY_SIZE=1024 - FOUND_MEM=no - - if test -f /proc/cpuinfo; then - # Looks like a Linux system - MEMORY_SIZE=`cat /proc/meminfo | grep MemTotal | awk '{print $2}'` - MEMORY_SIZE=`expr $MEMORY_SIZE / 1024` - FOUND_MEM=yes - fi - - if test -x /usr/sbin/prtconf; then - # Looks like a Solaris system - MEMORY_SIZE=`/usr/sbin/prtconf | grep "Memory size" | awk '{ print $3 }'` - FOUND_MEM=yes - fi - - if test -x /usr/sbin/system_profiler; then - # Looks like a MacOSX system - MEMORY_SIZE=`/usr/sbin/system_profiler -detailLevel full SPHardwareDataType | grep 'Memory' | awk '{print $2}'` - MEMORY_SIZE=`expr $MEMORY_SIZE \* 1024` - FOUND_MEM=yes - fi - - if test "x$build_os" = xwindows; then - MEMORY_SIZE=`systeminfo | grep 'Total Physical Memory:' | awk '{ print $4 }' | sed 's/,//'` - FOUND_MEM=yes - fi - - if test "x$FOUND_MEM" = xyes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MEMORY_SIZE MB" >&5 -$as_echo "$MEMORY_SIZE MB" >&6; } - else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: could not detect memory size defaulting to 1024MB!" >&5 -$as_echo "could not detect memory size defaulting to 1024MB!" >&6; } - fi - -else - MEMORY_SIZE=$with_memory_size -fi - - -# Where is the source? It is located two levels above the configure script. -CURDIR="$PWD" -cd "$AUTOCONF_DIR/../.." -SRC_ROOT="`pwd`" - -cd "$CURDIR" - -# For cygwin we need cygpath first, since it is used everywhere. -# Extract the first word of "cygpath", so it can be a program name with args. -set dummy cygpath; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_CYGPATH+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - case $CYGPATH in - [\\/]* | ?:[\\/]*) - ac_cv_path_CYGPATH="$CYGPATH" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_CYGPATH="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -CYGPATH=$ac_cv_path_CYGPATH -if test -n "$CYGPATH"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CYGPATH" >&5 -$as_echo "$CYGPATH" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -PATH_SEP=":" -if test "x$BUILD_OS" = "xwindows"; then - if test "x$CYGPATH" = x; then - as_fn_error $? "Something is wrong with your cygwin installation since I cannot find cygpath.exe in your path" "$LINENO" 5 - fi - PATH_SEP=";" -fi - - - - # Fail with message the path to the source root if var SRC_ROOT contains a path with no spaces in it. - # Unless on Windows, where we can rewrite the path. - HAS_SPACE=`echo "$SRC_ROOT" | grep " "` - if test "x$HAS_SPACE" != x; then - if test "x$BUILD_OS" = "xwindows"; then - SRC_ROOT=`$CYGPATH -s -m -a "$SRC_ROOT"` - SRC_ROOT=`$CYGPATH -u "$SRC_ROOT"` - else - as_fn_error $? "You cannot have spaces in the path to the source root! \"$SRC_ROOT\"" "$LINENO" 5 - fi - fi - - - # Fail with message the path to the current directory if var CURDIR contains a path with no spaces in it. - # Unless on Windows, where we can rewrite the path. - HAS_SPACE=`echo "$CURDIR" | grep " "` - if test "x$HAS_SPACE" != x; then - if test "x$BUILD_OS" = "xwindows"; then - CURDIR=`$CYGPATH -s -m -a "$CURDIR"` - CURDIR=`$CYGPATH -u "$CURDIR"` - else - as_fn_error $? "You cannot have spaces in the path to the current directory! \"$CURDIR\"" "$LINENO" 5 - fi - fi - - -if test "x$BUILD_OS" = "xsolaris"; then - # Also search in /usr/ccs/bin for utilities like ar and as. - PATH="/usr/ccs/bin:$PATH" -fi - -############################################################################### -# -# OpenJDK or closed -# -# Check whether --enable-openjdk-only was given. -if test "${enable_openjdk_only+set}" = set; then : - enableval=$enable_openjdk_only; -fi - - -if test "x$enable_openjdk_only" = "xyes"; then - OPENJDK=true -elif test "x$enable_openjdk_only" = "xno"; then - OPENJDK=false -elif test -d "$SRC_ROOT/jdk/src/closed"; then - OPENJDK=false -else - OPENJDK=true -fi - -if test "x$OPENJDK" = "xtrue"; then - SET_OPENJDK=OPENJDK=true -fi - - - -############################################################################### -# -# JIGSAW or not. The JIGSAW variable is used during the intermediate -# stage when we are building both the old style JDK and the new style modularized JDK. -# When the modularized JDK is finalized, this option will go away. -# -# Check whether --enable-jigsaw was given. -if test "${enable_jigsaw+set}" = set; then : - enableval=$enable_jigsaw; -fi - - -if test "x$enable_jigsaw" = "xyes"; then - JIGSAW=true -else - JIGSAW=false -fi - - -############################################################################### -# -# Check which variant of the JDK that we want to build. -# Currently we have: -# normal: standard edition -# embedded: cut down to a smaller footprint -# -# Effectively the JDK variant gives a name to a specific set of -# modules to compile into the JDK. In the future, these modules -# might even be Jigsaw modules. -# -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking which variant of the JDK to build" >&5 -$as_echo_n "checking which variant of the JDK to build... " >&6; } - -# Check whether --with-jdk-variant was given. -if test "${with_jdk_variant+set}" = set; then : - withval=$with_jdk_variant; -fi - - -if test "x$with_jdk_variant" = xnormal || test "x$with_jdk_variant" = x; then - JAVASE_EMBEDDED="" - MINIMIZE_RAM_USAGE="" - JDK_VARIANT="normal" -elif test "x$with_jdk_variant" = xembedded; then - JAVASE_EMBEDDED="JAVASE_EMBEDDED:=true" - MINIMIZE_RAM_USAGE="MINIMIZE_RAM_USAGE:=true" - JDK_VARIANT="embedded" -else - as_fn_error $? "The available JDK variants are: normal, embedded" "$LINENO" 5 -fi - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $JDK_VARIANT" >&5 -$as_echo "$JDK_VARIANT" >&6; } - -############################################################################### -# -# Should we build a JDK/JVM with head support (ie a graphical ui)? -# We always build headless support. -# -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking headful support" >&5 -$as_echo_n "checking headful support... " >&6; } -# Check whether --enable-headful was given. -if test "${enable_headful+set}" = set; then : - enableval=$enable_headful; SUPPORT_HEADFUL=${enable_headful} -else - SUPPORT_HEADFUL=yes -fi - - -SUPPORT_HEADLESS=yes -BUILD_HEADLESS="BUILD_HEADLESS:=true" - -if test "x$SUPPORT_HEADFUL" = xyes; then - # We are building both headful and headless. - BUILD_HEADLESS_ONLY="" - headful_msg="inlude support for both headful and headless" -fi - -if test "x$SUPPORT_HEADFUL" = xno; then - # Thus we are building headless only. - BUILD_HEADLESS="BUILD_HEADLESS:=true" - BUILD_HEADLESS_ONLY="BUILD_HEADLESS_ONLY:=true" - headful_msg="headless only" -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $headful_msg" >&5 -$as_echo "$headful_msg" >&6; } - - - - - - -############################################################################### -# -# Check which variants of the JVM that we want to build. -# Currently we have: -# server: normal interpreter and a tiered C1/C2 compiler -# client: normal interpreter and C1 (no C2 compiler) (only 32-bit platforms) -# kernel: kernel footprint JVM that passes the TCK without major performance problems, -# ie normal interpreter and C1, only the serial GC, kernel jvmti etc -# zero: no machine code interpreter, no compiler -# zeroshark: zero interpreter and shark/llvm compiler backend -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking which variants of the JVM that should be built" >&5 -$as_echo_n "checking which variants of the JVM that should be built... " >&6; } - -# Check whether --with-jvm-variants was given. -if test "${with_jvm_variants+set}" = set; then : - withval=$with_jvm_variants; -fi - - -if test "x$with_jvm_variants" = x; then - if test "x$JDK_VARIANT" = xembedded; then - with_jvm_variants="kernel" - elif test "x$HOST_CPU_BITS" = x64; then - with_jvm_variants="server" - else - # Yes, on 32-bit machines, the same source (almost) is compiled twice - # to generate two libjvm.so files. Fun, fun. - with_jvm_variants="client,server" - fi -fi - -JVM_VARIANTS=",$with_jvm_variants," -TEST_VARIANTS=`$ECHO "$JVM_VARIANTS" | $SED -e 's/server,//' -e 's/client,//' -e 's/kernel,//' -e 's/zero,//' -e 's/zeroshark,//'` - -if test "x$TEST_VARIANTS" != "x,"; then - as_fn_error $? "The available JVM variants are: server, client, kernel, zero, zeroshark" "$LINENO" 5 -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_jvm_variants" >&5 -$as_echo "$with_jvm_variants" >&6; } - -JVM_VARIANT_SERVER=`$ECHO "$JVM_VARIANTS" | $SED -e '/,server,/!s/.*/false/g' -e '/,server,/s/.*/true/g'` -JVM_VARIANT_CLIENT=`$ECHO "$JVM_VARIANTS" | $SED -e '/,client,/!s/.*/false/g' -e '/,client,/s/.*/true/g'` -JVM_VARIANT_KERNEL=`$ECHO "$JVM_VARIANTS" | $SED -e '/,kernel,/!s/.*/false/g' -e '/,kernel,/s/.*/true/g'` -JVM_VARIANT_ZERO=`$ECHO "$JVM_VARIANTS" | $SED -e '/,zero,/!s/.*/false/g' -e '/,zero,/s/.*/true/g'` -JVM_VARIANT_ZEROSHARK=`$ECHO "$JVM_VARIANTS" | $SED -e '/,zeroshark,/!s/.*/false/g' -e '/,zeroshark,/s/.*/true/g'` - -if test "x$JVM_VARIANT_CLIENT" = xtrue; then - if test "x$HOST_CPU_BITS" = x64; then - as_fn_error $? "You cannot build a client JVM for a 64-bit machine." "$LINENO" 5 - fi -fi -if test "x$JVM_VARIANT_KERNEL" = xtrue; then - if test "x$HOST_CPU_BITS" = x64; then - as_fn_error $? "You cannot build a kernel JVM for a 64-bit machine." "$LINENO" 5 - fi -fi - -COUNT_VARIANTS=`$ECHO "$JVM_VARIANTS" | $SED -e 's/server,/1/' -e 's/client,/1/' -e 's/kernel,/1/' -e 's/zero,/1/' -e 's/zeroshark,/1/'` -# Replace the commas with AND for use in the build directory name. -ANDED_JVM_VARIANTS=`$ECHO "$JVM_VARIANTS" | $SED -e 's/^,//' -e 's/,$//' -e 's/,/AND/'` -if test "x$COUNT_VARIANTS" != "x,1"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: NOTE! Longer build time since we are building more than one version of the libjvm! $with_jvm_variants" >&5 -$as_echo "$as_me: NOTE! Longer build time since we are building more than one version of the libjvm! $with_jvm_variants" >&6;} -fi - - - - - - - - -############################################################################### -# -# Set the debug level -# release: no debug information, all optimizations, no asserts. -# fastdebug: debug information (-g), all optimizations, all asserts -# slowdebug: debug information (-g), no optimizations, all asserts -# -DEBUG_LEVEL="release" -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking which debug level to use" >&5 -$as_echo_n "checking which debug level to use... " >&6; } -# Check whether --enable-debug was given. -if test "${enable_debug+set}" = set; then : - enableval=$enable_debug; - ENABLE_DEBUG="${enableval}" - DEBUG_LEVEL="fastdebug" - -else - ENABLE_DEBUG="no" -fi - - - -# Check whether --with-debug-level was given. -if test "${with_debug_level+set}" = set; then : - withval=$with_debug_level; - DEBUG_LEVEL="${withval}" - if test "x$ENABLE_DEBUG" = xyes; then - as_fn_error $? "You cannot use both --enable-debug and --with-debug-level at the same time." "$LINENO" 5 - fi - -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $DEBUG_LEVEL" >&5 -$as_echo "$DEBUG_LEVEL" >&6; } - -if test "x$DEBUG_LEVEL" != xrelease && \ - test "x$DEBUG_LEVEL" != xfastdebug && \ - test "x$DEBUG_LEVEL" != xslowdebug; then - as_fn_error $? "Allowed debug levels are: release, fastdebug and slowdebug" "$LINENO" 5 -fi - -case $DEBUG_LEVEL in - release ) - VARIANT="OPT" - FASTDEBUG="false" - DEBUG_CLASSFILES="false" - BUILD_VARIANT_RELEASE="" - ;; - fastdebug ) - VARIANT="DBG" - FASTDEBUG="true" - DEBUG_CLASSFILES="true" - BUILD_VARIANT_RELEASE="-fastdebug" - ;; - slowdebug ) - VARIANT="DBG" - FASTDEBUG="false" - DEBUG_CLASSFILES="true" - BUILD_VARIANT_RELEASE="-debug" - ;; -esac - - - - - - - -# Source the version numbers -. $AUTOCONF_DIR/version.numbers -if test "x$OPENJDK" = "xfalse"; then - . $AUTOCONF_DIR/closed.version.numbers -fi -# Now set the JDK version, milestone, build number etc. - - - - - - - - - - - - -COPYRIGHT_YEAR=`date +'%Y'` - - -RUNTIME_NAME="$PRODUCT_NAME $PRODUCT_SUFFIX" - - -if test "x$JDK_UPDATE_VERSION" != x; then - JDK_VERSION="${JDK_MAJOR_VERSION}.${JDK_MINOR_VERSION}.${JDK_MICRO_VERSION}_${JDK_UPDATE_VERSION}" -else - JDK_VERSION="${JDK_MAJOR_VERSION}.${JDK_MINOR_VERSION}.${JDK_MICRO_VERSION}" -fi - - -if test "x$MILESTONE" != x; then - RELEASE="${JDK_VERSION}-${MILESTONE}${BUILD_VARIANT_RELEASE}" -else - RELEASE="${JDK_VERSION}${BUILD_VARIANT_RELEASE}" -fi - - -if test "x$JDK_BUILD_NUMBER" != x; then - FULL_VERSION="${RELEASE}-${JDK_BUILD_NUMBER}" -else - JDK_BUILD_NUMBER=b00 - BUILD_DATE=`date '+%Y_%m_%d_%H_%M'` - # Avoid [:alnum:] since it depends on the locale. - CLEAN_USERNAME=`echo "$USER" | $TR -d -c 'abcdefghijklmnopqrstuvqxyz0123456789'` - USER_RELEASE_SUFFIX=`echo "${CLEAN_USERNAME}_${BUILD_DATE}" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvqxyz'` - FULL_VERSION="${RELEASE}-${USER_RELEASE_SUFFIX}-${JDK_BUILD_NUMBER}" -fi - -COOKED_BUILD_NUMBER=`$ECHO $JDK_BUILD_NUMBER | $SED -e 's/^b//' -e 's/^0//'` - - -# Test from where we are running configure, in or outside of src root. -if test "x$CURDIR" = "x$SRC_ROOT" || test "x$CURDIR" = "x$SRC_ROOT/common" || test "x$CURDIR" = "x$SRC_ROOT/common/autoconf" || test "x$CURDIR" = "x$SRC_ROOT/common/makefiles" ; then - # We are running configure from the src root. - # Create a default ./build/host-variant-debuglevel output root. - CONF_NAME="${HOST_OS}-${HOST_CPU}-${JDK_VARIANT}-${ANDED_JVM_VARIANTS}-${DEBUG_LEVEL}" - OUTPUT_ROOT="$SRC_ROOT/build/${CONF_NAME}" - mkdir -p "$OUTPUT_ROOT" - if test ! -d "$OUTPUT_ROOT"; then - as_fn_error $? "Could not create build directory $OUTPUT_ROOT" "$LINENO" 5 - fi -else - # We are running configure from outside of the src dir. - # Then use the current directory as output dir! - # If configuration is situated in normal build directory, just use the build - # directory name as configuration name, otherwise use the complete path. - CONF_NAME=`$ECHO $CURDIR | $SED -e "s!^${SRC_ROOT}/build/!!"` - OUTPUT_ROOT="$CURDIR" -fi - - - # Fail with message the path to the output root if var OUTPUT_ROOT contains a path with no spaces in it. - # Unless on Windows, where we can rewrite the path. - HAS_SPACE=`echo "$OUTPUT_ROOT" | grep " "` - if test "x$HAS_SPACE" != x; then - if test "x$BUILD_OS" = "xwindows"; then - OUTPUT_ROOT=`$CYGPATH -s -m -a "$OUTPUT_ROOT"` - OUTPUT_ROOT=`$CYGPATH -u "$OUTPUT_ROOT"` - else - as_fn_error $? "You cannot have spaces in the path to the output root! \"$OUTPUT_ROOT\"" "$LINENO" 5 - fi - fi - - -# Save the arguments given to us -echo "$CONFIGURE_COMMAND_LINE" > $OUTPUT_ROOT/configure-arguments - -# Check if the VS env variables were setup prior to running configure. -# If not, then find vcvarsall.bat and run it automatically, and integrate -# the set env variables into the spec file. -SETUPDEVENV="# No special vars" -if test "x$BUILD_OS" = "xwindows"; then - # If vcvarsall.bat has been run, then VCINSTALLDIR is set. - if test "x$VCINSTALLDIR" != x; then - # No further setup is needed. The build will happen from this kind - # of shell. - SETUPDEVENV="# This spec file expects that you are running bash from within a VS command prompt." - # Make sure to remind you, if you forget to run make from a cygwin bash shell - # that is spawned "bash -l" from a VS command prompt. - CHECK_FOR_VCINSTALLDIR=yes - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if you are running from within a VS command prompt" >&5 -$as_echo_n "checking if you are running from within a VS command prompt... " >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - else - # Ah, we have not yet run vcvarsall.bat/vsvars32.bat/vsvars64.bat. Lets do that. First find it. - if test "x$VS100COMNTOOLS" != x; then - VARSBAT=`find "$VS100COMNTOOLS/../.." -name vcvarsall.bat` - SEARCH_ROOT="$VS100COMNTOOLS" - else - VARSBAT=`find "$PROGRAMFILES" -name vcvarsall.bat` - SEARCH_ROOT="$PROGRAMFILES" - fi - VCPATH=`dirname "$VARSBAT"` - VCPATH=`cygpath -w "$VCPATH"` - if test "x$VARSBAT" = x || test ! -d "$VCPATH"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can find the VS installation" >&5 -$as_echo_n "checking if we can find the VS installation... " >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - as_fn_error $? "Tried to find a VS installation using both $SEARCH_ROOT but failed. Please run \"c:\\cygwin\\bin\\bash.exe -l\" from a VS command prompt and then run configure/make from there." "$LINENO" 5 - fi - case "$LEGACY_HOST_CPU1" in - i?86) - VARSBAT_ARCH=x86 - ;; - *) - VARSBAT_ARCH=$LEGACY_HOST_CPU1 - ;; - esac - # Lets extract the variables that are set by vcvarsall.bat/vsvars32.bat/vsvars64.bat - cd $OUTPUT_ROOT - bash $SRC_ROOT/common/bin/extractvcvars.sh "$VARSBAT" "$VARSBAT_ARCH" - cd $CURDIR - if test ! -s $OUTPUT_ROOT/localdevenv.sh || test ! -s $OUTPUT_ROOT/localdevenv.gmk; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can extract the needed env variables" >&5 -$as_echo_n "checking if we can extract the needed env variables... " >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - as_fn_error $? "Could not succesfully extract the env variables needed for the VS setup. Please run \"c:\\cygwin\\bin\\bash.exe -l\" from a VS command prompt and then run configure/make from there." "$LINENO" 5 - fi - # Now set all paths and other env variables. This will allow the rest of - # the configure script to find and run the compiler in the proper way. - . $OUTPUT_ROOT/localdevenv.sh - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can find the VS installation" >&5 -$as_echo_n "checking if we can find the VS installation... " >&6; } - if test "x$VCINSTALLDIR" != x; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $VCINSTALLDIR" >&5 -$as_echo "$VCINSTALLDIR" >&6; } - else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - as_fn_error $? "Could not find VS installation. Please install. If you are sure you have installed VS, then please run \"c:\\cygwin\\bin\\bash.exe -l\" from a VS command prompt and then run configure/make from there." "$LINENO" 5 - fi - CHECK_FOR_VCINSTALLDIR=no - SETUPDEVENV="include $OUTPUT_ROOT/localdevenv.gmk" - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for msvcr100.dll" >&5 -$as_echo_n "checking for msvcr100.dll... " >&6; } - -# Check whether --with-msvcr100dll was given. -if test "${with_msvcr100dll+set}" = set; then : - withval=$with_msvcr100dll; -fi - - if test "x$with_msvcr100dll" != x; then - MSVCR100DLL="$with_msvcr100dll" - else - if test "x$HOST_CPU_BITS" = x64; then - MSVCR100DLL=`find "$VCINSTALLDIR/.." -name msvcr100.dll | grep x64 | head --lines 1` - else - MSVCR100DLL=`find "$VCINSTALLDIR/.." -name msvcr100.dll | grep x86 | grep -v ia64 | grep -v x64 | head --lines 1` - if test "x$MSVCR100DLL" = x; then - MSVCR100DLL=`find "$VCINSTALLDIR/.." -name msvcr100.dll | head --lines 1` - fi - fi - fi - if test "x$MSVCR100DLL" = x; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - as_fn_error $? "Could not find msvcr100.dll !" "$LINENO" 5 - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSVCR100DLL" >&5 -$as_echo "$MSVCR100DLL" >&6; } - - # Fail with message the path to msvcr100.dll if var MSVCR100DLL contains a path with no spaces in it. - # Unless on Windows, where we can rewrite the path. - HAS_SPACE=`echo "$MSVCR100DLL" | grep " "` - if test "x$HAS_SPACE" != x; then - if test "x$BUILD_OS" = "xwindows"; then - MSVCR100DLL=`$CYGPATH -s -m -a "$MSVCR100DLL"` - MSVCR100DLL=`$CYGPATH -u "$MSVCR100DLL"` - else - as_fn_error $? "You cannot have spaces in the path to msvcr100.dll! \"$MSVCR100DLL\"" "$LINENO" 5 - fi - fi - - fi -fi - - - - -# Most of the probed defines are put into config.h -ac_config_headers="$ac_config_headers $OUTPUT_ROOT/config.h:$AUTOCONF_DIR/config.h.in" - -# The spec.gmk file contains all variables for the make system. -ac_config_files="$ac_config_files $OUTPUT_ROOT/spec.gmk:$AUTOCONF_DIR/spec.gmk.in" - -# The generated Makefile knows where the spec.gmk is and where the source is. -# You can run make from the OUTPUT_ROOT. If you have only -# one configured host, then you can also run make from the SRC_ROOT, -# since it will go look for a single spec.gmk file. Or perhaps it -# should instead make all configured hosts it can find? -ac_config_files="$ac_config_files $OUTPUT_ROOT/Makefile:$AUTOCONF_DIR/Makefile.in" - - -SPEC=$OUTPUT_ROOT/spec.gmk - -CONF_NAME=$CONF_NAME - -OUTPUT_ROOT=$OUTPUT_ROOT - - -# Where are the sources. Any of these can be overridden -# using --with-override-corba and the likes. -LANGTOOLS_TOPDIR="$SRC_ROOT/langtools" -CORBA_TOPDIR="$SRC_ROOT/corba" -JAXP_TOPDIR="$SRC_ROOT/jaxp" -JAXWS_TOPDIR="$SRC_ROOT/jaxws" -HOTSPOT_TOPDIR="$SRC_ROOT/hotspot" -JDK_TOPDIR="$SRC_ROOT/jdk" - - - - - - - -# Check if pkg-config is available. - - -if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args. -set dummy ${ac_tool_prefix}pkg-config; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_PKG_CONFIG+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - case $PKG_CONFIG in - [\\/]* | ?:[\\/]*) - ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -PKG_CONFIG=$ac_cv_path_PKG_CONFIG -if test -n "$PKG_CONFIG"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PKG_CONFIG" >&5 -$as_echo "$PKG_CONFIG" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_path_PKG_CONFIG"; then - ac_pt_PKG_CONFIG=$PKG_CONFIG - # Extract the first word of "pkg-config", so it can be a program name with args. -set dummy pkg-config; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_ac_pt_PKG_CONFIG+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - case $ac_pt_PKG_CONFIG in - [\\/]* | ?:[\\/]*) - ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG -if test -n "$ac_pt_PKG_CONFIG"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_PKG_CONFIG" >&5 -$as_echo "$ac_pt_PKG_CONFIG" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_pt_PKG_CONFIG" = x; then - PKG_CONFIG="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - PKG_CONFIG=$ac_pt_PKG_CONFIG - fi -else - PKG_CONFIG="$ac_cv_path_PKG_CONFIG" -fi - -fi -if test -n "$PKG_CONFIG"; then - _pkg_min_version=0.9.0 - { $as_echo "$as_me:${as_lineno-$LINENO}: checking pkg-config is at least version $_pkg_min_version" >&5 -$as_echo_n "checking pkg-config is at least version $_pkg_min_version... " >&6; } - if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - PKG_CONFIG="" - fi - -fi - - -# Check whether --with-builddeps-conf was given. -if test "${with_builddeps_conf+set}" = set; then : - withval=$with_builddeps_conf; -fi - - - -# Check whether --with-builddeps-server was given. -if test "${with_builddeps_server+set}" = set; then : - withval=$with_builddeps_server; -fi - - - -# Check whether --with-builddeps-dir was given. -if test "${with_builddeps_dir+set}" = set; then : - withval=$with_builddeps_dir; -else - with_builddeps_dir=/localhome/builddeps -fi - - - -# Check whether --with-builddeps-group was given. -if test "${with_builddeps_group+set}" = set; then : - withval=$with_builddeps_group; -fi - - -# Check whether --enable-list-builddeps was given. -if test "${enable_list_builddeps+set}" = set; then : - enableval=$enable_list_builddeps; LIST_BUILDDEPS="${enableval}" -else - LIST_BUILDDEPS='no' -fi - - -if test "x$LIST_BUILDDEPS" = xyes; then - echo - echo List of build dependencies known to the configure script, - echo that can be used in builddeps.conf files: - cat $SRC_ROOT/configure.ac | grep BDEPS_CHECK_MODUL | grep -v configure.ac | cut -f 2 -d ',' | tr -d ' ' | sort - echo - exit 1 -fi - -# If builddeps server or conf file is given. Setup buildeps usage. - - - if test "x$with_builddeps_server" != x || test "x$with_builddeps_conf" != x; then - if test "x$with_builddeps_conf" != x; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for supplied builddeps configuration file" >&5 -$as_echo_n "checking for supplied builddeps configuration file... " >&6; } - builddepsfile=$with_builddeps_conf - if test -s $builddepsfile; then - . $builddepsfile - { $as_echo "$as_me:${as_lineno-$LINENO}: result: loaded!" >&5 -$as_echo "loaded!" >&6; } - else - as_fn_error $? "The given builddeps conf file $with_builddeps_conf could not be loaded!" "$LINENO" 5 - fi - else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for builddeps.conf files in sources..." >&5 -$as_echo_n "checking for builddeps.conf files in sources...... " >&6; } - builddepsfile=`mktemp` - touch $builddepsfile - # Put all found confs into a single file. - find ${SRC_ROOT} -name builddeps.conf -exec cat \{\} \; >> $builddepsfile - # Source the file to acquire the variables - if test -s $builddepsfile; then - . $builddepsfile - { $as_echo "$as_me:${as_lineno-$LINENO}: result: found at least one!" >&5 -$as_echo "found at least one!" >&6; } - else - as_fn_error $? "Could not find any builddeps.conf at all!" "$LINENO" 5 - fi - fi - # Create build and host names that use _ instead of "-" and ".". - # This is necessary to use them in variable names. - build_var=`echo ${build} | tr '-' '_' | tr '.' '_'` - host_var=`echo ${host} | tr '-' '_' | tr '.' '_'` - # Extract rewrite information for build and host - eval rewritten_build=\${REWRITE_${build_var}} - if test "x$rewritten_build" = x; then - rewritten_build=${build} - echo Build stays the same $rewritten_build - else - echo Rewriting build for builddeps into $rewritten_build - fi - eval rewritten_host=\${REWRITE_${host_var}} - if test "x$rewritten_host" = x; then - rewritten_host=${host} - echo Host stays the same $rewritten_host - else - echo Rewriting host for builddeps into $rewritten_host - fi - rewritten_build_var=`echo ${rewritten_build} | tr '-' '_' | tr '.' '_'` - rewritten_host_var=`echo ${rewritten_host} | tr '-' '_' | tr '.' '_'` - fi - for ac_prog in 7z unzip -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_BDEPS_UNZIP+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$BDEPS_UNZIP"; then - ac_cv_prog_BDEPS_UNZIP="$BDEPS_UNZIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_BDEPS_UNZIP="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -BDEPS_UNZIP=$ac_cv_prog_BDEPS_UNZIP -if test -n "$BDEPS_UNZIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BDEPS_UNZIP" >&5 -$as_echo "$BDEPS_UNZIP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$BDEPS_UNZIP" && break -done - - if test "x$BDEPS_UNZIP" = x7z; then - BDEPS_UNZIP="7z x" - fi - - for ac_prog in wget lftp ftp -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_BDEPS_FTP+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$BDEPS_FTP"; then - ac_cv_prog_BDEPS_FTP="$BDEPS_FTP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_BDEPS_FTP="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -BDEPS_FTP=$ac_cv_prog_BDEPS_FTP -if test -n "$BDEPS_FTP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BDEPS_FTP" >&5 -$as_echo "$BDEPS_FTP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$BDEPS_FTP" && break -done - - - -############################################################################### -# -# Configure the development tool paths and potential sysroot. -# -ac_ext=cpp -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu - -DEVKIT= -SYS_ROOT=/ - - -# The option used to specify the target .o,.a or .so file. -# When compiling, how to specify the to be created object file. -CC_OUT_OPTION='-o$(SPACE)' -# When linking, how to specify the to be created executable. -EXE_OUT_OPTION='-o$(SPACE)' -# When linking, how to specify the to be created dynamically linkable library. -LD_OUT_OPTION='-o$(SPACE)' -# When archiving, how to specify the to be create static archive for object files. -AR_OUT_OPTION='rcs$(SPACE)' - - - - - -# If --build AND --host is set, then the configure script will find any -# cross compilation tools in the PATH. Cross compilation tools -# follows the cross compilation standard where they are prefixed with ${host}. -# For example the binary i686-sun-solaris2.10-gcc -# will cross compile for i686-sun-solaris2.10 -# If neither of build and host is not set, then build=host and the -# default compiler found in the path will be used. -# Setting only --host, does not seem to be really supported. -# Please set both --build and --host if you want to cross compile. - -DEFINE_CROSS_COMPILE_ARCH="" -HOSTCC="" -HOSTCXX="" - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if this is a cross compile" >&5 -$as_echo_n "checking if this is a cross compile... " >&6; } -if test "x$build_var" != "x$host_var"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes, from $build_var to $host_var" >&5 -$as_echo "yes, from $build_var to $host_var" >&6; } - # We have detected a cross compile! - DEFINE_CROSS_COMPILE_ARCH="CROSS_COMPILE_ARCH:=$LEGACY_HOST_CPU1" - # Now we to find a C/C++ compiler that can build executables for the build - # platform. We can't use the AC_PROG_CC macro, since it can only be used - # once. - for ac_prog in cl cc gcc -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_HOSTCC+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - case $HOSTCC in - [\\/]* | ?:[\\/]*) - ac_cv_path_HOSTCC="$HOSTCC" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_HOSTCC="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -HOSTCC=$ac_cv_path_HOSTCC -if test -n "$HOSTCC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $HOSTCC" >&5 -$as_echo "$HOSTCC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$HOSTCC" && break -done - - - # Translate "gcc -E" into "`which gcc` -E" ie - # extract the full path to the binary and at the - # same time maintain any arguments passed to it. - # The command MUST exist in the path, or else! - tmp="$HOSTCC" - car="${tmp%% *}" - tmp="$HOSTCC EOL" - cdr="${tmp#* }" - # On windows we want paths without spaces. - if test "x$BUILD_OS" = "xwindows"; then - - # Translate long cygdrive or C:\sdfsf path - # into a short mixed mode path that has no - # spaces in it. - tmp="$car" - if test "x$BUILD_OS" = "xwindows"; then - tmp=`$CYGPATH -u "$car"` - tmp=`which "$tmp"` - # If file exists with .exe appended, that's the real filename - # and cygpath needs that to convert to short style path. - if test -f "${tmp}.exe"; then - tmp="${tmp}.exe" - elif test -f "${tmp}.cmd"; then - tmp="${tmp}.cmd" - fi - # Convert to C:/ mixed style path without spaces. - tmp=`$CYGPATH -s -m "$tmp"` - fi - car="$tmp" - - else - # "which" is not portable, but is used here - # because we know that the command exists! - car=`which $car` - fi - if test "x$cdr" != xEOL; then - HOSTCC="$car ${cdr% *}" - else - HOSTCC="$car" - fi - - for ac_prog in cl CC g++ -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_HOSTCXX+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - case $HOSTCXX in - [\\/]* | ?:[\\/]*) - ac_cv_path_HOSTCXX="$HOSTCXX" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_HOSTCXX="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -HOSTCXX=$ac_cv_path_HOSTCXX -if test -n "$HOSTCXX"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $HOSTCXX" >&5 -$as_echo "$HOSTCXX" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$HOSTCXX" && break -done - - - # Translate "gcc -E" into "`which gcc` -E" ie - # extract the full path to the binary and at the - # same time maintain any arguments passed to it. - # The command MUST exist in the path, or else! - tmp="$HOSTCXX" - car="${tmp%% *}" - tmp="$HOSTCXX EOL" - cdr="${tmp#* }" - # On windows we want paths without spaces. - if test "x$BUILD_OS" = "xwindows"; then - - # Translate long cygdrive or C:\sdfsf path - # into a short mixed mode path that has no - # spaces in it. - tmp="$car" - if test "x$BUILD_OS" = "xwindows"; then - tmp=`$CYGPATH -u "$car"` - tmp=`which "$tmp"` - # If file exists with .exe appended, that's the real filename - # and cygpath needs that to convert to short style path. - if test -f "${tmp}.exe"; then - tmp="${tmp}.exe" - elif test -f "${tmp}.cmd"; then - tmp="${tmp}.cmd" - fi - # Convert to C:/ mixed style path without spaces. - tmp=`$CYGPATH -s -m "$tmp"` - fi - car="$tmp" - - else - # "which" is not portable, but is used here - # because we know that the command exists! - car=`which $car` - fi - if test "x$cdr" != xEOL; then - HOSTCXX="$car ${cdr% *}" - else - HOSTCXX="$car" - fi - - # Building for the build platform should be easy. Therefore - # we do not need any linkers or assemblers etc. -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - -# You can force the sys-root if the sys-root encoded into the cross compiler tools -# is not correct. - -# Check whether --with-sys-root was given. -if test "${with_sys_root+set}" = set; then : - withval=$with_sys_root; -fi - - -if test "x$with_sys_root" != x; then - SYS_ROOT=$with_sys_root -fi - -# If a devkit is found on the builddeps server, then prepend its path to the -# PATH variable. If there are cross compilers available in the devkit, these -# will be found by AC_PROG_CC et al. - - - if test "x$with_builddeps_server" != x || test "x$with_builddeps_conf" != x; then - # Source the builddeps file again, to make sure it uses the latest variables! - . $builddepsfile - # Look for a host and build machine specific resource! - eval resource=\${builddep_devkit_BUILD_${rewritten_build_var}_HOST_${rewritten_host_var}} - if test "x$resource" = x; then - # Ok, lets instead look for a host specific resource - eval resource=\${builddep_devkit_HOST_${rewritten_host_var}} - fi - if test "x$resource" = x; then - # Ok, lets instead look for a build specific resource - eval resource=\${builddep_devkit_BUILD_${rewritten_build_var}} - fi - if test "x$resource" = x; then - # Ok, lets instead look for a generic resource - # (The devkit comes from M4 and not the shell, thus no need for eval here.) - resource=${builddep_devkit} - fi - if test "x$resource" != x; then - { $as_echo "$as_me:${as_lineno-$LINENO}: Using builddeps $resource for devkit" >&5 -$as_echo "$as_me: Using builddeps $resource for devkit" >&6;} - # If the resource in the builddeps.conf file is an existing directory, - # for example /java/linux/cups - if test -d ${resource}; then - depdir=${resource} - else - -# devkit is for example mymodule -# $resource is for example libs/general/libmymod_1_2_3.zip -# $with_builddeps_server is for example ftp://mybuilddeps.myserver.com/builddeps -# $with_builddeps_dir is for example /localhome/builddeps -# depdir is the name of the variable into which we store the depdir, eg MYMOD -# Will download ftp://mybuilddeps.myserver.com/builddeps/libs/general/libmymod_1_2_3.zip and -# unzip into the directory: /localhome/builddeps/libmymod_1_2_3 - filename=`basename $resource` - filebase=`echo $filename | sed 's/\.[^\.]*$//'` - filebase=${filename%%.*} - extension=${filename#*.} - installdir=$with_builddeps_dir/$filebase - if test ! -f $installdir/$filename.unpacked; then - { $as_echo "$as_me:${as_lineno-$LINENO}: Downloading build dependency devkit from $with_builddeps_server/$resource and installing into $installdir" >&5 -$as_echo "$as_me: Downloading build dependency devkit from $with_builddeps_server/$resource and installing into $installdir" >&6;} - if test ! -d $installdir; then - mkdir -p $installdir - fi - if test ! -d $installdir; then - as_fn_error $? "Could not create directory $installdir" "$LINENO" 5 - fi - tmpfile=`mktemp $installdir/devkit.XXXXXXXXX` - touch $tmpfile - if test ! -f $tmpfile; then - as_fn_error $? "Could not create files in directory $installdir" "$LINENO" 5 - fi - - # $with_builddeps_server/$resource is the ftp://abuilddeps.server.com/libs/cups.zip - # $tmpfile is the local file name for the downloaded file. - VALID_TOOL=no - if test "x$BDEPS_FTP" = xwget; then - VALID_TOOL=yes - wget -O $tmpfile $with_builddeps_server/$resource - fi - if test "x$BDEPS_FTP" = xlftp; then - VALID_TOOL=yes - lftp -c "get $with_builddeps_server/$resource -o $tmpfile" - fi - if test "x$BDEPS_FTP" = xftp; then - VALID_TOOL=yes - FTPSERVER=`echo $with_builddeps_server/$resource | cut -f 3 -d '/'` - FTPPATH=`echo $with_builddeps_server/$resource | cut -f 4- -d '/'` - FTPUSERPWD=${FTPSERVER%%@*} - if test "x$FTPSERVER" != "x$FTPUSERPWD"; then - FTPUSER=${userpwd%%:*} - FTPPWD=${userpwd#*@} - FTPSERVER=${FTPSERVER#*@} - else - FTPUSER=ftp - FTPPWD=ftp - fi - # the "pass" command does not work on some - # ftp clients (read ftp.exe) but if it works, - # passive mode is better! - (\ - echo "user $FTPUSER $FTPPWD" ;\ - echo "pass" ;\ - echo "bin" ;\ - echo "get $FTPPATH $tmpfile" ;\ - ) | ftp -in $FTPSERVER - fi - if test "x$VALID_TOOL" != xyes; then - as_fn_error $? "I do not know how to use the tool: $BDEPS_FTP" "$LINENO" 5 - fi - - mv $tmpfile $installdir/$filename - if test ! -s $installdir/$filename; then - as_fn_error $? "Could not download $with_builddeps_server/$resource" "$LINENO" 5 - fi - case "$extension" in - zip) echo "Unzipping $installdir/$filename..." - (cd $installdir ; rm -f $installdir/$filename.unpacked ; $BDEPS_UNZIP $installdir/$filename > /dev/null && touch $installdir/$filename.unpacked) - ;; - tar.gz) echo "Untaring $installdir/$filename..." - (cd $installdir ; rm -f $installdir/$filename.unpacked ; tar xzf $installdir/$filename && touch $installdir/$filename.unpacked) - ;; - tgz) echo "Untaring $installdir/$filename..." - (cd $installdir ; rm -f $installdir/$filename.unpacked ; tar xzf $installdir/$filename && touch $installdir/$filename.unpacked) - ;; - *) as_fn_error $? "Cannot handle build depency archive with extension $extension" "$LINENO" 5 - ;; - esac - fi - if test -f $installdir/$filename.unpacked; then - depdir=$installdir - fi - - fi - # Source the builddeps file again, because in the previous command, the depdir - # was updated to point at the current build dependency install directory. - . $builddepsfile - # Now extract variables from the builddeps.conf files. - theroot=${builddep_devkit_ROOT} - thecflags=${builddep_devkit_CFLAGS} - thelibs=${builddep_devkit_LIBS} - if test "x$depdir" = x; then - as_fn_error $? "Could not download build dependency devkit" "$LINENO" 5 - fi - DEVKIT=$depdir - if test "x$theroot" != x; then - DEVKIT="$theroot" - fi - if test "x$thecflags" != x; then - DEVKIT_CFLAGS="$thecflags" - fi - if test "x$thelibs" != x; then - DEVKIT_LIBS="$thelibs" - fi - # Found devkit - PATH="$DEVKIT/bin:$PATH" - SYS_ROOT="$DEVKIT/${rewritten_host}/sys-root" - if test "x$x_includes" = "xNONE"; then - x_includes="$SYS_ROOT/usr/include/X11" - fi - if test "x$x_libraries" = "xNONE"; then - x_libraries="$SYS_ROOT/usr/lib" - fi - - - fi - - fi - - -if test "x$SYS_ROOT" != "x/" ; then - CFLAGS="--sysroot=$SYS_ROOT $CFLAGS" - CXXFLAGS="--sysroot=$SYS_ROOT $CXXFLAGS" - OBJCFLAGS="--sysroot=$SYS_ROOT $OBJCFLAGS" - OBJCXXFLAGS="--sysroot=$SYS_ROOT $OBJCFLAGS" - CPPFLAGS="--sysroot=$SYS_ROOT $CPPFLAGS" - LDFLAGS="--sysroot=$SYS_ROOT $LDFLAGS" -fi - -# Store the CFLAGS etal passed to the configure script. -ORG_CFLAGS="$CFLAGS" -ORG_CXXFLAGS="$CXXFLAGS" -ORG_OBJCFLAGS="$OBJCFLAGS" - -prepare_help_system - -# gcc is almost always present, but on Windows we -# prefer cl.exe and on Solaris we prefer CC. -# Thus test for them in this order. -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -if test -n "$ac_tool_prefix"; then - for ac_prog in cl cc gcc - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_CC+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_CC="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$CC" && break - done -fi -if test -z "$CC"; then - ac_ct_CC=$CC - for ac_prog in cl cc gcc -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_CC="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 -$as_echo "$ac_ct_CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$ac_ct_CC" && break -done - - if test "x$ac_ct_CC" = x; then - CC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - CC=$ac_ct_CC - fi -fi - - -test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "no acceptable C compiler found in \$PATH -See \`config.log' for more details" "$LINENO" 5 ; } - -# Provide some information about the compiler. -$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 -set X $ac_compile -ac_compiler=$2 -for ac_option in --version -v -V -qversion; do - { { ac_try="$ac_compiler $ac_option >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compiler $ac_option >&5") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - sed '10a\ -... rest of stderr output deleted ... - 10q' conftest.err >conftest.er1 - cat conftest.er1 >&5 - fi - rm -f conftest.er1 conftest.err - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } -done - -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" -# Try to create an executable without -o first, disregard a.out. -# It will help us diagnose broken compilers, and finding out an intuition -# of exeext. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 -$as_echo_n "checking whether the C compiler works... " >&6; } -ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` - -# The possible output files: -ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" - -ac_rmfiles= -for ac_file in $ac_files -do - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; - * ) ac_rmfiles="$ac_rmfiles $ac_file";; - esac -done -rm -f $ac_rmfiles - -if { { ac_try="$ac_link_default" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link_default") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. -# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' -# in a Makefile. We should not override ac_cv_exeext if it was cached, -# so that the user can short-circuit this test for compilers unknown to -# Autoconf. -for ac_file in $ac_files '' -do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) - ;; - [ab].out ) - # We found the default executable, but exeext='' is most - # certainly right. - break;; - *.* ) - if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; - then :; else - ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - fi - # We set ac_cv_exeext here because the later test for it is not - # safe: cross compilers may not add the suffix if given an `-o' - # argument, so we may need to know it at that point already. - # Even if this section looks crufty: it has the advantage of - # actually working. - break;; - * ) - break;; - esac -done -test "$ac_cv_exeext" = no && ac_cv_exeext= - -else - ac_file='' -fi -if test -z "$ac_file"; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error 77 "C compiler cannot create executables -See \`config.log' for more details" "$LINENO" 5 ; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 -$as_echo_n "checking for C compiler default output file name... " >&6; } -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 -$as_echo "$ac_file" >&6; } -ac_exeext=$ac_cv_exeext - -rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out -ac_clean_files=$ac_clean_files_save -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 -$as_echo_n "checking for suffix of executables... " >&6; } -if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - # If both `conftest.exe' and `conftest' are `present' (well, observable) -# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will -# work properly (i.e., refer to `conftest.exe'), while it won't with -# `rm'. -for ac_file in conftest.exe conftest conftest.*; do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; - *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - break;; - * ) break;; - esac -done -else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details" "$LINENO" 5 ; } -fi -rm -f conftest conftest$ac_cv_exeext -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 -$as_echo "$ac_cv_exeext" >&6; } - -rm -f conftest.$ac_ext -EXEEXT=$ac_cv_exeext -ac_exeext=$EXEEXT -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -int -main () -{ -FILE *f = fopen ("conftest.out", "w"); - return ferror (f) || fclose (f) != 0; - - ; - return 0; -} -_ACEOF -ac_clean_files="$ac_clean_files conftest.out" -# Check that the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 -$as_echo_n "checking whether we are cross compiling... " >&6; } -if test "$cross_compiling" != yes; then - { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - if { ac_try='./conftest$ac_cv_exeext' - { { case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; }; then - cross_compiling=no - else - if test "$cross_compiling" = maybe; then - cross_compiling=yes - else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot run C compiled programs. -If you meant to cross compile, use \`--host'. -See \`config.log' for more details" "$LINENO" 5 ; } - fi - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 -$as_echo "$cross_compiling" >&6; } - -rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out -ac_clean_files=$ac_clean_files_save -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 -$as_echo_n "checking for suffix of object files... " >&6; } -if test "${ac_cv_objext+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.o conftest.obj -if { { ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compile") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - for ac_file in conftest.o conftest.obj conftest.*; do - test -f "$ac_file" || continue; - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; - *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` - break;; - esac -done -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot compute suffix of object files: cannot compile -See \`config.log' for more details" "$LINENO" 5 ; } -fi -rm -f conftest.$ac_cv_objext conftest.$ac_ext -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 -$as_echo "$ac_cv_objext" >&6; } -OBJEXT=$ac_cv_objext -ac_objext=$OBJEXT -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 -$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } -if test "${ac_cv_c_compiler_gnu+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ -#ifndef __GNUC__ - choke me -#endif - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_compiler_gnu=yes -else - ac_compiler_gnu=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -ac_cv_c_compiler_gnu=$ac_compiler_gnu - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 -$as_echo "$ac_cv_c_compiler_gnu" >&6; } -if test $ac_compiler_gnu = yes; then - GCC=yes -else - GCC= -fi -ac_test_CFLAGS=${CFLAGS+set} -ac_save_CFLAGS=$CFLAGS -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 -$as_echo_n "checking whether $CC accepts -g... " >&6; } -if test "${ac_cv_prog_cc_g+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - ac_save_c_werror_flag=$ac_c_werror_flag - ac_c_werror_flag=yes - ac_cv_prog_cc_g=no - CFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_g=yes -else - CFLAGS="" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - -else - ac_c_werror_flag=$ac_save_c_werror_flag - CFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_g=yes -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - ac_c_werror_flag=$ac_save_c_werror_flag -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 -$as_echo "$ac_cv_prog_cc_g" >&6; } -if test "$ac_test_CFLAGS" = set; then - CFLAGS=$ac_save_CFLAGS -elif test $ac_cv_prog_cc_g = yes; then - if test "$GCC" = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-g" - fi -else - if test "$GCC" = yes; then - CFLAGS="-O2" - else - CFLAGS= - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 -$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } -if test "${ac_cv_prog_cc_c89+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - ac_cv_prog_cc_c89=no -ac_save_CC=$CC -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -#include -#include -/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ -struct buf { int x; }; -FILE * (*rcsopen) (struct buf *, struct stat *, int); -static char *e (p, i) - char **p; - int i; -{ - return p[i]; -} -static char *f (char * (*g) (char **, int), char **p, ...) -{ - char *s; - va_list v; - va_start (v,p); - s = g (p, va_arg (v,int)); - va_end (v); - return s; -} - -/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has - function prototypes and stuff, but not '\xHH' hex character constants. - These don't provoke an error unfortunately, instead are silently treated - as 'x'. The following induces an error, until -std is added to get - proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an - array size at least. It's necessary to write '\x00'==0 to get something - that's true only with -std. */ -int osf4_cc_array ['\x00' == 0 ? 1 : -1]; - -/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters - inside strings and character constants. */ -#define FOO(x) 'x' -int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; - -int test (int i, double x); -struct s1 {int (*f) (int a);}; -struct s2 {int (*f) (double a);}; -int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); -int argc; -char **argv; -int -main () -{ -return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; - ; - return 0; -} -_ACEOF -for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ - -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" -do - CC="$ac_save_CC $ac_arg" - if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_c89=$ac_arg -fi -rm -f core conftest.err conftest.$ac_objext - test "x$ac_cv_prog_cc_c89" != "xno" && break -done -rm -f conftest.$ac_ext -CC=$ac_save_CC - -fi -# AC_CACHE_VAL -case "x$ac_cv_prog_cc_c89" in - x) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 -$as_echo "none needed" >&6; } ;; - xno) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 -$as_echo "unsupported" >&6; } ;; - *) - CC="$CC $ac_cv_prog_cc_c89" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 -$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; -esac -if test "x$ac_cv_prog_cc_c89" != xno; then : - -fi - -ac_ext=cpp -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu - -if test "x$CC" = x; then - help_on_build_dependency devkit - as_fn_error $? "Could not find a compiler. $HELP_MSG" "$LINENO" 5 -fi -if test "x$CC" = xcc && test "x$BUILD_OS" = xmacosx; then - # Do not use cc on MacOSX use gcc instead. - CC="gcc" -fi - - # Translate "gcc -E" into "`which gcc` -E" ie - # extract the full path to the binary and at the - # same time maintain any arguments passed to it. - # The command MUST exist in the path, or else! - tmp="$CC" - car="${tmp%% *}" - tmp="$CC EOL" - cdr="${tmp#* }" - # On windows we want paths without spaces. - if test "x$BUILD_OS" = "xwindows"; then - - # Translate long cygdrive or C:\sdfsf path - # into a short mixed mode path that has no - # spaces in it. - tmp="$car" - if test "x$BUILD_OS" = "xwindows"; then - tmp=`$CYGPATH -u "$car"` - tmp=`which "$tmp"` - # If file exists with .exe appended, that's the real filename - # and cygpath needs that to convert to short style path. - if test -f "${tmp}.exe"; then - tmp="${tmp}.exe" - elif test -f "${tmp}.cmd"; then - tmp="${tmp}.cmd" - fi - # Convert to C:/ mixed style path without spaces. - tmp=`$CYGPATH -s -m "$tmp"` - fi - car="$tmp" - - else - # "which" is not portable, but is used here - # because we know that the command exists! - car=`which $car` - fi - if test "x$cdr" != xEOL; then - CC="$car ${cdr% *}" - else - CC="$car" - fi - - -ac_ext=cpp -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu -if test -z "$CXX"; then - if test -n "$CCC"; then - CXX=$CCC - else - if test -n "$ac_tool_prefix"; then - for ac_prog in cl CC g++ - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_CXX+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CXX"; then - ac_cv_prog_CXX="$CXX" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_CXX="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CXX=$ac_cv_prog_CXX -if test -n "$CXX"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXX" >&5 -$as_echo "$CXX" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$CXX" && break - done -fi -if test -z "$CXX"; then - ac_ct_CXX=$CXX - for ac_prog in cl CC g++ -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_CXX"; then - ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_CXX="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_CXX=$ac_cv_prog_ac_ct_CXX -if test -n "$ac_ct_CXX"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CXX" >&5 -$as_echo "$ac_ct_CXX" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$ac_ct_CXX" && break -done - - if test "x$ac_ct_CXX" = x; then - CXX="g++" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - CXX=$ac_ct_CXX - fi -fi - - fi -fi -# Provide some information about the compiler. -$as_echo "$as_me:${as_lineno-$LINENO}: checking for C++ compiler version" >&5 -set X $ac_compile -ac_compiler=$2 -for ac_option in --version -v -V -qversion; do - { { ac_try="$ac_compiler $ac_option >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compiler $ac_option >&5") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - sed '10a\ -... rest of stderr output deleted ... - 10q' conftest.err >conftest.er1 - cat conftest.er1 >&5 - fi - rm -f conftest.er1 conftest.err - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } -done - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C++ compiler" >&5 -$as_echo_n "checking whether we are using the GNU C++ compiler... " >&6; } -if test "${ac_cv_cxx_compiler_gnu+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ -#ifndef __GNUC__ - choke me -#endif - - ; - return 0; -} -_ACEOF -if ac_fn_cxx_try_compile "$LINENO"; then : - ac_compiler_gnu=yes -else - ac_compiler_gnu=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -ac_cv_cxx_compiler_gnu=$ac_compiler_gnu - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_cxx_compiler_gnu" >&5 -$as_echo "$ac_cv_cxx_compiler_gnu" >&6; } -if test $ac_compiler_gnu = yes; then - GXX=yes -else - GXX= -fi -ac_test_CXXFLAGS=${CXXFLAGS+set} -ac_save_CXXFLAGS=$CXXFLAGS -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -g" >&5 -$as_echo_n "checking whether $CXX accepts -g... " >&6; } -if test "${ac_cv_prog_cxx_g+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - ac_save_cxx_werror_flag=$ac_cxx_werror_flag - ac_cxx_werror_flag=yes - ac_cv_prog_cxx_g=no - CXXFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_cxx_try_compile "$LINENO"; then : - ac_cv_prog_cxx_g=yes -else - CXXFLAGS="" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_cxx_try_compile "$LINENO"; then : - -else - ac_cxx_werror_flag=$ac_save_cxx_werror_flag - CXXFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_cxx_try_compile "$LINENO"; then : - ac_cv_prog_cxx_g=yes -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - ac_cxx_werror_flag=$ac_save_cxx_werror_flag -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cxx_g" >&5 -$as_echo "$ac_cv_prog_cxx_g" >&6; } -if test "$ac_test_CXXFLAGS" = set; then - CXXFLAGS=$ac_save_CXXFLAGS -elif test $ac_cv_prog_cxx_g = yes; then - if test "$GXX" = yes; then - CXXFLAGS="-g -O2" - else - CXXFLAGS="-g" - fi -else - if test "$GXX" = yes; then - CXXFLAGS="-O2" - else - CXXFLAGS= - fi -fi -ac_ext=cpp -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu - -if test "x$CXX" = xCC && test "x$BUILD_OS" = xmacosx; then - # The found CC, even though it seems to be a g++ derivate, cannot compile - # c++ code. Override. - CXX="g++" -fi - - # Translate "gcc -E" into "`which gcc` -E" ie - # extract the full path to the binary and at the - # same time maintain any arguments passed to it. - # The command MUST exist in the path, or else! - tmp="$CXX" - car="${tmp%% *}" - tmp="$CXX EOL" - cdr="${tmp#* }" - # On windows we want paths without spaces. - if test "x$BUILD_OS" = "xwindows"; then - - # Translate long cygdrive or C:\sdfsf path - # into a short mixed mode path that has no - # spaces in it. - tmp="$car" - if test "x$BUILD_OS" = "xwindows"; then - tmp=`$CYGPATH -u "$car"` - tmp=`which "$tmp"` - # If file exists with .exe appended, that's the real filename - # and cygpath needs that to convert to short style path. - if test -f "${tmp}.exe"; then - tmp="${tmp}.exe" - elif test -f "${tmp}.cmd"; then - tmp="${tmp}.cmd" - fi - # Convert to C:/ mixed style path without spaces. - tmp=`$CYGPATH -s -m "$tmp"` - fi - car="$tmp" - - else - # "which" is not portable, but is used here - # because we know that the command exists! - car=`which $car` - fi - if test "x$cdr" != xEOL; then - CXX="$car ${cdr% *}" - else - CXX="$car" - fi - - -if test "x$CXX" = x || test "x$CC" = x; then - help_on_build_dependency devkit - as_fn_error $? "Could not find the needed compilers! $HELP_MSG " "$LINENO" 5 -fi - -if test "x$BUILD_OS" != xwindows; then - ac_ext=m -ac_cpp='$OBJCPP $CPPFLAGS' -ac_compile='$OBJC -c $OBJCFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$OBJC -o conftest$ac_exeext $OBJCFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_objc_compiler_gnu -if test -n "$ac_tool_prefix"; then - for ac_prog in gcc objcc objc cc CC - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_OBJC+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$OBJC"; then - ac_cv_prog_OBJC="$OBJC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_OBJC="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -OBJC=$ac_cv_prog_OBJC -if test -n "$OBJC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJC" >&5 -$as_echo "$OBJC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$OBJC" && break - done -fi -if test -z "$OBJC"; then - ac_ct_OBJC=$OBJC - for ac_prog in gcc objcc objc cc CC -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_OBJC+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_OBJC"; then - ac_cv_prog_ac_ct_OBJC="$ac_ct_OBJC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_OBJC="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_OBJC=$ac_cv_prog_ac_ct_OBJC -if test -n "$ac_ct_OBJC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJC" >&5 -$as_echo "$ac_ct_OBJC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$ac_ct_OBJC" && break -done - - if test "x$ac_ct_OBJC" = x; then - OBJC="gcc" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - OBJC=$ac_ct_OBJC - fi -fi - -# Provide some information about the compiler. -$as_echo "$as_me:${as_lineno-$LINENO}: checking for Objective C compiler version" >&5 -set X $ac_compile -ac_compiler=$2 -for ac_option in --version -v -V -qversion; do - { { ac_try="$ac_compiler $ac_option >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compiler $ac_option >&5") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - sed '10a\ -... rest of stderr output deleted ... - 10q' conftest.err >conftest.er1 - cat conftest.er1 >&5 - fi - rm -f conftest.er1 conftest.err - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } -done - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU Objective C compiler" >&5 -$as_echo_n "checking whether we are using the GNU Objective C compiler... " >&6; } -if test "${ac_cv_objc_compiler_gnu+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ -#ifndef __GNUC__ - choke me -#endif - - ; - return 0; -} -_ACEOF -if ac_fn_objc_try_compile "$LINENO"; then : - ac_compiler_gnu=yes -else - ac_compiler_gnu=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -ac_cv_objc_compiler_gnu=$ac_compiler_gnu - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objc_compiler_gnu" >&5 -$as_echo "$ac_cv_objc_compiler_gnu" >&6; } -if test $ac_compiler_gnu = yes; then - GOBJC=yes -else - GOBJC= -fi -ac_test_OBJCFLAGS=${OBJCFLAGS+set} -ac_save_OBJCFLAGS=$OBJCFLAGS -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $OBJC accepts -g" >&5 -$as_echo_n "checking whether $OBJC accepts -g... " >&6; } -if test "${ac_cv_prog_objc_g+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - ac_save_objc_werror_flag=$ac_objc_werror_flag - ac_objc_werror_flag=yes - ac_cv_prog_objc_g=no - OBJCFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_objc_try_compile "$LINENO"; then : - ac_cv_prog_objc_g=yes -else - OBJCFLAGS="" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_objc_try_compile "$LINENO"; then : - -else - ac_objc_werror_flag=$ac_save_objc_werror_flag - OBJCFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_objc_try_compile "$LINENO"; then : - ac_cv_prog_objc_g=yes -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - ac_objc_werror_flag=$ac_save_objc_werror_flag -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_objc_g" >&5 -$as_echo "$ac_cv_prog_objc_g" >&6; } -if test "$ac_test_OBJCFLAGS" = set; then - OBJCFLAGS=$ac_save_OBJCFLAGS -elif test $ac_cv_prog_objc_g = yes; then - if test "$GOBJC" = yes; then - OBJCFLAGS="-g -O2" - else - OBJCFLAGS="-g" - fi -else - if test "$GOBJC" = yes; then - OBJCFLAGS="-O2" - else - OBJCFLAGS= - fi -fi -ac_ext=cpp -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu - - - # Translate "gcc -E" into "`which gcc` -E" ie - # extract the full path to the binary and at the - # same time maintain any arguments passed to it. - # The command MUST exist in the path, or else! - tmp="$OBJC" - car="${tmp%% *}" - tmp="$OBJC EOL" - cdr="${tmp#* }" - # On windows we want paths without spaces. - if test "x$BUILD_OS" = "xwindows"; then - - # Translate long cygdrive or C:\sdfsf path - # into a short mixed mode path that has no - # spaces in it. - tmp="$car" - if test "x$BUILD_OS" = "xwindows"; then - tmp=`$CYGPATH -u "$car"` - tmp=`which "$tmp"` - # If file exists with .exe appended, that's the real filename - # and cygpath needs that to convert to short style path. - if test -f "${tmp}.exe"; then - tmp="${tmp}.exe" - elif test -f "${tmp}.cmd"; then - tmp="${tmp}.cmd" - fi - # Convert to C:/ mixed style path without spaces. - tmp=`$CYGPATH -s -m "$tmp"` - fi - car="$tmp" - - else - # "which" is not portable, but is used here - # because we know that the command exists! - car=`which $car` - fi - if test "x$cdr" != xEOL; then - OBJC="$car ${cdr% *}" - else - OBJC="$car" - fi - -else - OBJC= -fi - -# Restore the flags to the user specified values. -# This is necessary since AC_PROG_CC defaults CFLAGS to "-g -O2" -CFLAGS="$ORG_CFLAGS" -CXXFLAGS="$ORG_CXXFLAGS" -OBJCFLAGS="$ORG_OBJCFLAGS" - -# If we are not cross compiling, use the same compilers for -# building the build platform executables. -if test "x$DEFINE_CROSS_COMPILE_ARCH" = x; then - HOSTCC="$CC" - HOSTCXX="$CXX" -fi - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}ld", so it can be a program name with args. -set dummy ${ac_tool_prefix}ld; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_LD+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$LD"; then - ac_cv_prog_LD="$LD" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_LD="${ac_tool_prefix}ld" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -LD=$ac_cv_prog_LD -if test -n "$LD"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5 -$as_echo "$LD" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_LD"; then - ac_ct_LD=$LD - # Extract the first word of "ld", so it can be a program name with args. -set dummy ld; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_LD+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_LD"; then - ac_cv_prog_ac_ct_LD="$ac_ct_LD" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_LD="ld" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_LD=$ac_cv_prog_ac_ct_LD -if test -n "$ac_ct_LD"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LD" >&5 -$as_echo "$ac_ct_LD" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_LD" = x; then - LD="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - LD=$ac_ct_LD - fi -else - LD="$ac_cv_prog_LD" -fi - - - # Translate "gcc -E" into "`which gcc` -E" ie - # extract the full path to the binary and at the - # same time maintain any arguments passed to it. - # The command MUST exist in the path, or else! - tmp="$LD" - car="${tmp%% *}" - tmp="$LD EOL" - cdr="${tmp#* }" - # On windows we want paths without spaces. - if test "x$BUILD_OS" = "xwindows"; then - - # Translate long cygdrive or C:\sdfsf path - # into a short mixed mode path that has no - # spaces in it. - tmp="$car" - if test "x$BUILD_OS" = "xwindows"; then - tmp=`$CYGPATH -u "$car"` - tmp=`which "$tmp"` - # If file exists with .exe appended, that's the real filename - # and cygpath needs that to convert to short style path. - if test -f "${tmp}.exe"; then - tmp="${tmp}.exe" - elif test -f "${tmp}.cmd"; then - tmp="${tmp}.cmd" - fi - # Convert to C:/ mixed style path without spaces. - tmp=`$CYGPATH -s -m "$tmp"` - fi - car="$tmp" - - else - # "which" is not portable, but is used here - # because we know that the command exists! - car=`which $car` - fi - if test "x$cdr" != xEOL; then - LD="$car ${cdr% *}" - else - LD="$car" - fi - -LD="$CC" -LDEXE="$CC" -LDCXX="$CXX" -LDEXECXX="$CXX" -# LDEXE is the linker to use, when creating executables. - -# Linking C++ libraries. - -# Linking C++ executables. - - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. -set dummy ${ac_tool_prefix}ar; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_AR+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$AR"; then - ac_cv_prog_AR="$AR" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_AR="${ac_tool_prefix}ar" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -AR=$ac_cv_prog_AR -if test -n "$AR"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5 -$as_echo "$AR" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_AR"; then - ac_ct_AR=$AR - # Extract the first word of "ar", so it can be a program name with args. -set dummy ar; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_AR+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_AR"; then - ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_AR="ar" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_AR=$ac_cv_prog_ac_ct_AR -if test -n "$ac_ct_AR"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5 -$as_echo "$ac_ct_AR" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_AR" = x; then - AR="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - AR=$ac_ct_AR - fi -else - AR="$ac_cv_prog_AR" -fi - - - # Translate "gcc -E" into "`which gcc` -E" ie - # extract the full path to the binary and at the - # same time maintain any arguments passed to it. - # The command MUST exist in the path, or else! - tmp="$AR" - car="${tmp%% *}" - tmp="$AR EOL" - cdr="${tmp#* }" - # On windows we want paths without spaces. - if test "x$BUILD_OS" = "xwindows"; then - - # Translate long cygdrive or C:\sdfsf path - # into a short mixed mode path that has no - # spaces in it. - tmp="$car" - if test "x$BUILD_OS" = "xwindows"; then - tmp=`$CYGPATH -u "$car"` - tmp=`which "$tmp"` - # If file exists with .exe appended, that's the real filename - # and cygpath needs that to convert to short style path. - if test -f "${tmp}.exe"; then - tmp="${tmp}.exe" - elif test -f "${tmp}.cmd"; then - tmp="${tmp}.cmd" - fi - # Convert to C:/ mixed style path without spaces. - tmp=`$CYGPATH -s -m "$tmp"` - fi - car="$tmp" - - else - # "which" is not portable, but is used here - # because we know that the command exists! - car=`which $car` - fi - if test "x$cdr" != xEOL; then - AR="$car ${cdr% *}" - else - AR="$car" - fi - -if test "x$BUILD_OS" = xmacosx; then - ARFLAGS="-r" -else - ARFLAGS="" -fi - - -COMPILER_NAME=gcc -COMPILER_TYPE=CC -if test "x$BUILD_OS" = xwindows; then : - - # For now, assume that we are always compiling using cl.exe. - CC_OUT_OPTION=-Fo - EXE_OUT_OPTION=-out: - LD_OUT_OPTION=-out: - AR_OUT_OPTION=-out: - # On Windows, reject /usr/bin/link, which is a cygwin - # program for something completely different. - # Extract the first word of "link", so it can be a program name with args. -set dummy link; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_WINLD+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$WINLD"; then - ac_cv_prog_WINLD="$WINLD" # Let the user override the test. -else - ac_prog_rejected=no -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/bin/link"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_WINLD="link" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. - set dummy $ac_cv_prog_WINLD - shift - if test $# != 0; then - # We chose a different compiler from the bogus one. - # However, it has the same basename, so the bogon will be chosen - # first if we set WINLD to just the basename; use the full file name. - shift - ac_cv_prog_WINLD="$as_dir/$ac_word${1+' '}$@" - fi -fi -fi -fi -WINLD=$ac_cv_prog_WINLD -if test -n "$WINLD"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $WINLD" >&5 -$as_echo "$WINLD" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - # Since we must ignore the first found link, WINLD will contain - # the full path to the link.exe program. - - # Translate long cygdrive or C:\sdfsf path - # into a short mixed mode path that has no - # spaces in it. - tmp="$WINLD" - if test "x$BUILD_OS" = "xwindows"; then - tmp=`$CYGPATH -u "$WINLD"` - tmp=`which "$tmp"` - # If file exists with .exe appended, that's the real filename - # and cygpath needs that to convert to short style path. - if test -f "${tmp}.exe"; then - tmp="${tmp}.exe" - elif test -f "${tmp}.cmd"; then - tmp="${tmp}.cmd" - fi - # Convert to C:/ mixed style path without spaces. - tmp=`$CYGPATH -s -m "$tmp"` - fi - WINLD="$tmp" - - LD="$WINLD" - LDEXE="$WINLD" - LDCXX="$WINLD" - LDEXECXX="$WINLD" - - # Extract the first word of "mt", so it can be a program name with args. -set dummy mt; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_MT+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$MT"; then - ac_cv_prog_MT="$MT" # Let the user override the test. -else - ac_prog_rejected=no -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/bin/mt"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_MT="mt" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. - set dummy $ac_cv_prog_MT - shift - if test $# != 0; then - # We chose a different compiler from the bogus one. - # However, it has the same basename, so the bogon will be chosen - # first if we set MT to just the basename; use the full file name. - shift - ac_cv_prog_MT="$as_dir/$ac_word${1+' '}$@" - fi -fi -fi -fi -MT=$ac_cv_prog_MT -if test -n "$MT"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MT" >&5 -$as_echo "$MT" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - - # Translate long cygdrive or C:\sdfsf path - # into a short mixed mode path that has no - # spaces in it. - tmp="$MT" - if test "x$BUILD_OS" = "xwindows"; then - tmp=`$CYGPATH -u "$MT"` - tmp=`which "$tmp"` - # If file exists with .exe appended, that's the real filename - # and cygpath needs that to convert to short style path. - if test -f "${tmp}.exe"; then - tmp="${tmp}.exe" - elif test -f "${tmp}.cmd"; then - tmp="${tmp}.cmd" - fi - # Convert to C:/ mixed style path without spaces. - tmp=`$CYGPATH -s -m "$tmp"` - fi - MT="$tmp" - - # The resource compiler - # Extract the first word of "rc", so it can be a program name with args. -set dummy rc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_RC+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$RC"; then - ac_cv_prog_RC="$RC" # Let the user override the test. -else - ac_prog_rejected=no -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/bin/rc"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_RC="rc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. - set dummy $ac_cv_prog_RC - shift - if test $# != 0; then - # We chose a different compiler from the bogus one. - # However, it has the same basename, so the bogon will be chosen - # first if we set RC to just the basename; use the full file name. - shift - ac_cv_prog_RC="$as_dir/$ac_word${1+' '}$@" - fi -fi -fi -fi -RC=$ac_cv_prog_RC -if test -n "$RC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RC" >&5 -$as_echo "$RC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - - # Translate long cygdrive or C:\sdfsf path - # into a short mixed mode path that has no - # spaces in it. - tmp="$RC" - if test "x$BUILD_OS" = "xwindows"; then - tmp=`$CYGPATH -u "$RC"` - tmp=`which "$tmp"` - # If file exists with .exe appended, that's the real filename - # and cygpath needs that to convert to short style path. - if test -f "${tmp}.exe"; then - tmp="${tmp}.exe" - elif test -f "${tmp}.cmd"; then - tmp="${tmp}.cmd" - fi - # Convert to C:/ mixed style path without spaces. - tmp=`$CYGPATH -s -m "$tmp"` - fi - RC="$tmp" - - - RC_FLAGS="-nologo /l 0x409 /r" - if test "x$VARIANT" = xOPT; then : - - RC_FLAGS="$RC_FLAGS -d NDEBUG" - -fi - JDK_UPDATE_VERSION_NOTNULL=$JDK_UPDATE_VERSION - if test "x$JDK_UPDATE_VERSION" = x; then : - - JDK_UPDATE_VERSION_NOTNULL=0 - -fi - RC_FLAGS="$RC_FLAGS -d \"JDK_BUILD_ID=$FULL_VERSION\"" - RC_FLAGS="$RC_FLAGS -d \"JDK_COMPANY=$COMPANY_NAME\"" - RC_FLAGS="$RC_FLAGS -d \"JDK_COMPONENT=$PRODUCT_NAME $JDK_RC_PLATFORM_NAME binary\"" - RC_FLAGS="$RC_FLAGS -d \"JDK_VER=$JDK_MINOR_VERSION.$JDK_MICRO_VERSION.$JDK_UPDATE_VERSION_NOTNULL.$COOKED_BUILD_NUMBER\"" - RC_FLAGS="$RC_FLAGS -d \"JDK_COPYRIGHT=Copyright \xA9 $COPYRIGHT_YEAR\"" - RC_FLAGS="$RC_FLAGS -d \"JDK_NAME=$PRODUCT_NAME $JDK_RC_PLATFORM_NAME $JDK_MINOR_VERSION $JDK_UPDATE_META_TAG\"" - RC_FLAGS="$RC_FLAGS -d \"JDK_FVER=$JDK_MINOR_VERSION,$JDK_MICRO_VERSION,$JDK_UPDATE_VERSION_NOTNULL,$COOKED_BUILD_NUMBER\"" - - # lib.exe is used to create static libraries. - # Extract the first word of "lib", so it can be a program name with args. -set dummy lib; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_WINAR+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$WINAR"; then - ac_cv_prog_WINAR="$WINAR" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_WINAR="lib" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -WINAR=$ac_cv_prog_WINAR -if test -n "$WINAR"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $WINAR" >&5 -$as_echo "$WINAR" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - - # Translate long cygdrive or C:\sdfsf path - # into a short mixed mode path that has no - # spaces in it. - tmp="$WINAR" - if test "x$BUILD_OS" = "xwindows"; then - tmp=`$CYGPATH -u "$WINAR"` - tmp=`which "$tmp"` - # If file exists with .exe appended, that's the real filename - # and cygpath needs that to convert to short style path. - if test -f "${tmp}.exe"; then - tmp="${tmp}.exe" - elif test -f "${tmp}.cmd"; then - tmp="${tmp}.cmd" - fi - # Convert to C:/ mixed style path without spaces. - tmp=`$CYGPATH -s -m "$tmp"` - fi - WINAR="$tmp" - - AR="$WINAR" - ARFLAGS="-nologo -NODEFAULTLIB:MSVCRT" - - # Extract the first word of "dumpbin", so it can be a program name with args. -set dummy dumpbin; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_DUMPBIN+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$DUMPBIN"; then - ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_DUMPBIN="dumpbin" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -DUMPBIN=$ac_cv_prog_DUMPBIN -if test -n "$DUMPBIN"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5 -$as_echo "$DUMPBIN" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - - # Translate long cygdrive or C:\sdfsf path - # into a short mixed mode path that has no - # spaces in it. - tmp="$DUMPBIN" - if test "x$BUILD_OS" = "xwindows"; then - tmp=`$CYGPATH -u "$DUMPBIN"` - tmp=`which "$tmp"` - # If file exists with .exe appended, that's the real filename - # and cygpath needs that to convert to short style path. - if test -f "${tmp}.exe"; then - tmp="${tmp}.exe" - elif test -f "${tmp}.cmd"; then - tmp="${tmp}.cmd" - fi - # Convert to C:/ mixed style path without spaces. - tmp=`$CYGPATH -s -m "$tmp"` - fi - DUMPBIN="$tmp" - - - COMPILER_TYPE=CL - CCXXFLAGS="$CCXXFLAGS -nologo" - LDFLAGS="$LDFLAGS -nologo -opt:ref -incremental:no" - if test "x$LEGACY_HOST_CPU1" = xi586; then - LDFLAGS="$LDFLAGS -safeseh" - fi - # TODO: make -debug optional "--disable-full-debug-symbols" - LDFLAGS="$LDFLAGS -debug" - -fi - - - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 -$as_echo_n "checking how to run the C preprocessor... " >&6; } -# On Suns, sometimes $CPP names a directory. -if test -n "$CPP" && test -d "$CPP"; then - CPP= -fi -if test -z "$CPP"; then - if test "${ac_cv_prog_CPP+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - # Double quotes because CPP needs to be expanded - for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" - do - ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - -else - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.i conftest.$ac_ext - - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - # Broken: success on invalid input. -continue -else - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.i conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.i conftest.err conftest.$ac_ext -if $ac_preproc_ok; then : - break -fi - - done - ac_cv_prog_CPP=$CPP - -fi - CPP=$ac_cv_prog_CPP -else - ac_cv_prog_CPP=$CPP -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 -$as_echo "$CPP" >&6; } -ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - -else - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.i conftest.$ac_ext - - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - # Broken: success on invalid input. -continue -else - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.i conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.i conftest.err conftest.$ac_ext -if $ac_preproc_ok; then : - -else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "C preprocessor \"$CPP\" fails sanity check -See \`config.log' for more details" "$LINENO" 5 ; } -fi - -ac_ext=cpp -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu - - - # Translate "gcc -E" into "`which gcc` -E" ie - # extract the full path to the binary and at the - # same time maintain any arguments passed to it. - # The command MUST exist in the path, or else! - tmp="$CPP" - car="${tmp%% *}" - tmp="$CPP EOL" - cdr="${tmp#* }" - # On windows we want paths without spaces. - if test "x$BUILD_OS" = "xwindows"; then - - # Translate long cygdrive or C:\sdfsf path - # into a short mixed mode path that has no - # spaces in it. - tmp="$car" - if test "x$BUILD_OS" = "xwindows"; then - tmp=`$CYGPATH -u "$car"` - tmp=`which "$tmp"` - # If file exists with .exe appended, that's the real filename - # and cygpath needs that to convert to short style path. - if test -f "${tmp}.exe"; then - tmp="${tmp}.exe" - elif test -f "${tmp}.cmd"; then - tmp="${tmp}.cmd" - fi - # Convert to C:/ mixed style path without spaces. - tmp=`$CYGPATH -s -m "$tmp"` - fi - car="$tmp" - - else - # "which" is not portable, but is used here - # because we know that the command exists! - car=`which $car` - fi - if test "x$cdr" != xEOL; then - CPP="$car ${cdr% *}" - else - CPP="$car" - fi - - -ac_ext=cpp -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C++ preprocessor" >&5 -$as_echo_n "checking how to run the C++ preprocessor... " >&6; } -if test -z "$CXXCPP"; then - if test "${ac_cv_prog_CXXCPP+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - # Double quotes because CXXCPP needs to be expanded - for CXXCPP in "$CXX -E" "/lib/cpp" - do - ac_preproc_ok=false -for ac_cxx_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if ac_fn_cxx_try_cpp "$LINENO"; then : - -else - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.i conftest.$ac_ext - - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -_ACEOF -if ac_fn_cxx_try_cpp "$LINENO"; then : - # Broken: success on invalid input. -continue -else - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.i conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.i conftest.err conftest.$ac_ext -if $ac_preproc_ok; then : - break -fi - - done - ac_cv_prog_CXXCPP=$CXXCPP - -fi - CXXCPP=$ac_cv_prog_CXXCPP -else - ac_cv_prog_CXXCPP=$CXXCPP -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXXCPP" >&5 -$as_echo "$CXXCPP" >&6; } -ac_preproc_ok=false -for ac_cxx_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if ac_fn_cxx_try_cpp "$LINENO"; then : - -else - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.i conftest.$ac_ext - - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -_ACEOF -if ac_fn_cxx_try_cpp "$LINENO"; then : - # Broken: success on invalid input. -continue -else - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.i conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.i conftest.err conftest.$ac_ext -if $ac_preproc_ok; then : - -else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "C++ preprocessor \"$CXXCPP\" fails sanity check -See \`config.log' for more details" "$LINENO" 5 ; } -fi - -ac_ext=cpp -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu - - - # Translate "gcc -E" into "`which gcc` -E" ie - # extract the full path to the binary and at the - # same time maintain any arguments passed to it. - # The command MUST exist in the path, or else! - tmp="$CXXCPP" - car="${tmp%% *}" - tmp="$CXXCPP EOL" - cdr="${tmp#* }" - # On windows we want paths without spaces. - if test "x$BUILD_OS" = "xwindows"; then - - # Translate long cygdrive or C:\sdfsf path - # into a short mixed mode path that has no - # spaces in it. - tmp="$car" - if test "x$BUILD_OS" = "xwindows"; then - tmp=`$CYGPATH -u "$car"` - tmp=`which "$tmp"` - # If file exists with .exe appended, that's the real filename - # and cygpath needs that to convert to short style path. - if test -f "${tmp}.exe"; then - tmp="${tmp}.exe" - elif test -f "${tmp}.cmd"; then - tmp="${tmp}.cmd" - fi - # Convert to C:/ mixed style path without spaces. - tmp=`$CYGPATH -s -m "$tmp"` - fi - car="$tmp" - - else - # "which" is not portable, but is used here - # because we know that the command exists! - car=`which $car` - fi - if test "x$cdr" != xEOL; then - CXXCPP="$car ${cdr% *}" - else - CXXCPP="$car" - fi - - -# Find the right assembler. -if test "x$BUILD_OS" = xsolaris; then - # Extract the first word of "as", so it can be a program name with args. -set dummy as; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_AS+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - case $AS in - [\\/]* | ?:[\\/]*) - ac_cv_path_AS="$AS" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_AS="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -AS=$ac_cv_path_AS -if test -n "$AS"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AS" >&5 -$as_echo "$AS" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - - # Translate "gcc -E" into "`which gcc` -E" ie - # extract the full path to the binary and at the - # same time maintain any arguments passed to it. - # The command MUST exist in the path, or else! - tmp="$AS" - car="${tmp%% *}" - tmp="$AS EOL" - cdr="${tmp#* }" - # On windows we want paths without spaces. - if test "x$BUILD_OS" = "xwindows"; then - - # Translate long cygdrive or C:\sdfsf path - # into a short mixed mode path that has no - # spaces in it. - tmp="$car" - if test "x$BUILD_OS" = "xwindows"; then - tmp=`$CYGPATH -u "$car"` - tmp=`which "$tmp"` - # If file exists with .exe appended, that's the real filename - # and cygpath needs that to convert to short style path. - if test -f "${tmp}.exe"; then - tmp="${tmp}.exe" - elif test -f "${tmp}.cmd"; then - tmp="${tmp}.cmd" - fi - # Convert to C:/ mixed style path without spaces. - tmp=`$CYGPATH -s -m "$tmp"` - fi - car="$tmp" - - else - # "which" is not portable, but is used here - # because we know that the command exists! - car=`which $car` - fi - if test "x$cdr" != xEOL; then - AS="$car ${cdr% *}" - else - AS="$car" - fi - - ASFLAGS=" " -else - AS="$CC -c" - ASFLAGS=" " -fi - - - -if test "x$HOST_CPU_BITS" = x32 && test "x$HOST_OS" = xmacosx; then - # On 32-bit MacOSX the OS requires C-entry points to be 16 byte aligned. - # While waiting for a better solution, the current workaround is to use -mstackrealign. - CFLAGS="$CFLAGS -mstackrealign" - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if 32-bit compiler supports -mstackrealign" >&5 -$as_echo_n "checking if 32-bit compiler supports -mstackrealign... " >&6; } - -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -int main() { return 0; } -_ACEOF -if ac_fn_cxx_try_link "$LINENO"; then : - - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - -else - - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - as_fn_error $? "The selected compiler $CXX does not support -mstackrealign! Try to put another compiler in the path." "$LINENO" 5 - -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi - -if test "x$BUILD_OS" = xsolaris; then - # Extract the first word of "nm", so it can be a program name with args. -set dummy nm; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_NM+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - case $NM in - [\\/]* | ?:[\\/]*) - ac_cv_path_NM="$NM" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_NM="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -NM=$ac_cv_path_NM -if test -n "$NM"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NM" >&5 -$as_echo "$NM" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - - # Translate "gcc -E" into "`which gcc` -E" ie - # extract the full path to the binary and at the - # same time maintain any arguments passed to it. - # The command MUST exist in the path, or else! - tmp="$NM" - car="${tmp%% *}" - tmp="$NM EOL" - cdr="${tmp#* }" - # On windows we want paths without spaces. - if test "x$BUILD_OS" = "xwindows"; then - - # Translate long cygdrive or C:\sdfsf path - # into a short mixed mode path that has no - # spaces in it. - tmp="$car" - if test "x$BUILD_OS" = "xwindows"; then - tmp=`$CYGPATH -u "$car"` - tmp=`which "$tmp"` - # If file exists with .exe appended, that's the real filename - # and cygpath needs that to convert to short style path. - if test -f "${tmp}.exe"; then - tmp="${tmp}.exe" - elif test -f "${tmp}.cmd"; then - tmp="${tmp}.cmd" - fi - # Convert to C:/ mixed style path without spaces. - tmp=`$CYGPATH -s -m "$tmp"` - fi - car="$tmp" - - else - # "which" is not portable, but is used here - # because we know that the command exists! - car=`which $car` - fi - if test "x$cdr" != xEOL; then - NM="$car ${cdr% *}" - else - NM="$car" - fi - - # Extract the first word of "strip", so it can be a program name with args. -set dummy strip; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_STRIP+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - case $STRIP in - [\\/]* | ?:[\\/]*) - ac_cv_path_STRIP="$STRIP" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_STRIP="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -STRIP=$ac_cv_path_STRIP -if test -n "$STRIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 -$as_echo "$STRIP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - - # Translate "gcc -E" into "`which gcc` -E" ie - # extract the full path to the binary and at the - # same time maintain any arguments passed to it. - # The command MUST exist in the path, or else! - tmp="$STRIP" - car="${tmp%% *}" - tmp="$STRIP EOL" - cdr="${tmp#* }" - # On windows we want paths without spaces. - if test "x$BUILD_OS" = "xwindows"; then - - # Translate long cygdrive or C:\sdfsf path - # into a short mixed mode path that has no - # spaces in it. - tmp="$car" - if test "x$BUILD_OS" = "xwindows"; then - tmp=`$CYGPATH -u "$car"` - tmp=`which "$tmp"` - # If file exists with .exe appended, that's the real filename - # and cygpath needs that to convert to short style path. - if test -f "${tmp}.exe"; then - tmp="${tmp}.exe" - elif test -f "${tmp}.cmd"; then - tmp="${tmp}.cmd" - fi - # Convert to C:/ mixed style path without spaces. - tmp=`$CYGPATH -s -m "$tmp"` - fi - car="$tmp" - - else - # "which" is not portable, but is used here - # because we know that the command exists! - car=`which $car` - fi - if test "x$cdr" != xEOL; then - STRIP="$car ${cdr% *}" - else - STRIP="$car" - fi - - # Extract the first word of "mcs", so it can be a program name with args. -set dummy mcs; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_MCS+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - case $MCS in - [\\/]* | ?:[\\/]*) - ac_cv_path_MCS="$MCS" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_MCS="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -MCS=$ac_cv_path_MCS -if test -n "$MCS"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MCS" >&5 -$as_echo "$MCS" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - - # Translate "gcc -E" into "`which gcc` -E" ie - # extract the full path to the binary and at the - # same time maintain any arguments passed to it. - # The command MUST exist in the path, or else! - tmp="$MCS" - car="${tmp%% *}" - tmp="$MCS EOL" - cdr="${tmp#* }" - # On windows we want paths without spaces. - if test "x$BUILD_OS" = "xwindows"; then - - # Translate long cygdrive or C:\sdfsf path - # into a short mixed mode path that has no - # spaces in it. - tmp="$car" - if test "x$BUILD_OS" = "xwindows"; then - tmp=`$CYGPATH -u "$car"` - tmp=`which "$tmp"` - # If file exists with .exe appended, that's the real filename - # and cygpath needs that to convert to short style path. - if test -f "${tmp}.exe"; then - tmp="${tmp}.exe" - elif test -f "${tmp}.cmd"; then - tmp="${tmp}.cmd" - fi - # Convert to C:/ mixed style path without spaces. - tmp=`$CYGPATH -s -m "$tmp"` - fi - car="$tmp" - - else - # "which" is not portable, but is used here - # because we know that the command exists! - car=`which $car` - fi - if test "x$cdr" != xEOL; then - MCS="$car ${cdr% *}" - else - MCS="$car" - fi - -else - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}nm", so it can be a program name with args. -set dummy ${ac_tool_prefix}nm; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_NM+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$NM"; then - ac_cv_prog_NM="$NM" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_NM="${ac_tool_prefix}nm" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -NM=$ac_cv_prog_NM -if test -n "$NM"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NM" >&5 -$as_echo "$NM" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_NM"; then - ac_ct_NM=$NM - # Extract the first word of "nm", so it can be a program name with args. -set dummy nm; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_NM+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_NM"; then - ac_cv_prog_ac_ct_NM="$ac_ct_NM" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_NM="nm" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_NM=$ac_cv_prog_ac_ct_NM -if test -n "$ac_ct_NM"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NM" >&5 -$as_echo "$ac_ct_NM" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_NM" = x; then - NM="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - NM=$ac_ct_NM - fi -else - NM="$ac_cv_prog_NM" -fi - - - # Translate "gcc -E" into "`which gcc` -E" ie - # extract the full path to the binary and at the - # same time maintain any arguments passed to it. - # The command MUST exist in the path, or else! - tmp="$NM" - car="${tmp%% *}" - tmp="$NM EOL" - cdr="${tmp#* }" - # On windows we want paths without spaces. - if test "x$BUILD_OS" = "xwindows"; then - - # Translate long cygdrive or C:\sdfsf path - # into a short mixed mode path that has no - # spaces in it. - tmp="$car" - if test "x$BUILD_OS" = "xwindows"; then - tmp=`$CYGPATH -u "$car"` - tmp=`which "$tmp"` - # If file exists with .exe appended, that's the real filename - # and cygpath needs that to convert to short style path. - if test -f "${tmp}.exe"; then - tmp="${tmp}.exe" - elif test -f "${tmp}.cmd"; then - tmp="${tmp}.cmd" - fi - # Convert to C:/ mixed style path without spaces. - tmp=`$CYGPATH -s -m "$tmp"` - fi - car="$tmp" - - else - # "which" is not portable, but is used here - # because we know that the command exists! - car=`which $car` - fi - if test "x$cdr" != xEOL; then - NM="$car ${cdr% *}" - else - NM="$car" - fi - - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. -set dummy ${ac_tool_prefix}strip; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_STRIP+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$STRIP"; then - ac_cv_prog_STRIP="$STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_STRIP="${ac_tool_prefix}strip" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -STRIP=$ac_cv_prog_STRIP -if test -n "$STRIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 -$as_echo "$STRIP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_STRIP"; then - ac_ct_STRIP=$STRIP - # Extract the first word of "strip", so it can be a program name with args. -set dummy strip; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_STRIP"; then - ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_STRIP="strip" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP -if test -n "$ac_ct_STRIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 -$as_echo "$ac_ct_STRIP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_STRIP" = x; then - STRIP="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - STRIP=$ac_ct_STRIP - fi -else - STRIP="$ac_cv_prog_STRIP" -fi - - - # Translate "gcc -E" into "`which gcc` -E" ie - # extract the full path to the binary and at the - # same time maintain any arguments passed to it. - # The command MUST exist in the path, or else! - tmp="$STRIP" - car="${tmp%% *}" - tmp="$STRIP EOL" - cdr="${tmp#* }" - # On windows we want paths without spaces. - if test "x$BUILD_OS" = "xwindows"; then - - # Translate long cygdrive or C:\sdfsf path - # into a short mixed mode path that has no - # spaces in it. - tmp="$car" - if test "x$BUILD_OS" = "xwindows"; then - tmp=`$CYGPATH -u "$car"` - tmp=`which "$tmp"` - # If file exists with .exe appended, that's the real filename - # and cygpath needs that to convert to short style path. - if test -f "${tmp}.exe"; then - tmp="${tmp}.exe" - elif test -f "${tmp}.cmd"; then - tmp="${tmp}.cmd" - fi - # Convert to C:/ mixed style path without spaces. - tmp=`$CYGPATH -s -m "$tmp"` - fi - car="$tmp" - - else - # "which" is not portable, but is used here - # because we know that the command exists! - car=`which $car` - fi - if test "x$cdr" != xEOL; then - STRIP="$car ${cdr% *}" - else - STRIP="$car" - fi - -fi - -# When using cygwin, we need a wrapper binary that renames -# /cygdrive/c/ arguments into c:/ arguments and peeks into -# @files and rewrites these too! This wrapper binary is -# called uncygdrive.exe. -UNCYGDRIVE= -if test "x$BUILD_OS" = xwindows; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if uncygdrive can be created" >&5 -$as_echo_n "checking if uncygdrive can be created... " >&6; } - UNCYGDRIVE_SRC=`$CYGPATH -m $SRC_ROOT/common/src/uncygdrive.c` - rm -f $OUTPUT_ROOT/uncygdrive* - UNCYGDRIVE=`$CYGPATH -m $OUTPUT_ROOT/uncygdrive.exe` - cd $OUTPUT_ROOT - $CC $UNCYGDRIVE_SRC /Fe$UNCYGDRIVE > $OUTPUT_ROOT/uncygdrive1.log 2>&1 - cd $CURDIR - - if test ! -x $OUTPUT_ROOT/uncygdrive.exe; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - cat $OUTPUT_ROOT/uncygdrive1.log - as_fn_error $? "Could not create $OUTPUT_ROOT/uncygdrive.exe" "$LINENO" 5 - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $UNCYGDRIVE" >&5 -$as_echo "$UNCYGDRIVE" >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if uncygdrive.exe works" >&5 -$as_echo_n "checking if uncygdrive.exe works... " >&6; } - cd $OUTPUT_ROOT - $UNCYGDRIVE $CC $SRC_ROOT/common/src/uncygdrive.c /Fe$OUTPUT_ROOT/uncygdrive2.exe > $OUTPUT_ROOT/uncygdrive2.log 2>&1 - cd $CURDIR - if test ! -x $OUTPUT_ROOT/uncygdrive2.exe; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - cat $OUTPUT_ROOT/uncygdrive2.log - as_fn_error $? "Uncygdrive did not work!" "$LINENO" 5 - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - rm -f $OUTPUT_ROOT/uncygdrive?.??? $OUTPUT_ROOT/uncygdrive.obj -fi - - - - - # Check whether --enable-ccache was given. -if test "${enable_ccache+set}" = set; then : - enableval=$enable_ccache; ENABLE_CCACHE=${enable_ccache} -else - ENABLE_CCACHE=yes -fi - - if test "x$ENABLE_CCACHE" = xyes; then - # Extract the first word of "ccache", so it can be a program name with args. -set dummy ccache; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_CCACHE+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - case $CCACHE in - [\\/]* | ?:[\\/]*) - ac_cv_path_CCACHE="$CCACHE" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_CCACHE="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -CCACHE=$ac_cv_path_CCACHE -if test -n "$CCACHE"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CCACHE" >&5 -$as_echo "$CCACHE" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ccache" >&5 -$as_echo_n "checking for ccache... " >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: result: explicitly disabled" >&5 -$as_echo "explicitly disabled" >&6; } - CCACHE= - fi - - - -# Check whether --with-ccache-dir was given. -if test "${with_ccache_dir+set}" = set; then : - withval=$with_ccache_dir; -fi - - - if test "x$with_ccache_dir" != x; then - # When using a non home ccache directory, assume the use is to share ccache files - # with other users. Thus change the umask. - SET_CCACHE_DIR="CCACHE_DIR=$with_ccache_dir CCACHE_UMASK=002" - fi - CCACHE_FOUND="" - if test "x$CCACHE" != x; then - - if test "x$CCACHE" != x; then - CCACHE_FOUND="true" - # Only use ccache if it is 3.1.4 or later, which supports - # precompiled headers. - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if ccache supports precompiled headers" >&5 -$as_echo_n "checking if ccache supports precompiled headers... " >&6; } - HAS_GOOD_CCACHE=`($CCACHE --version | head -n 1 | grep -E 3.1.[456789]) 2> /dev/null` - if test "x$HAS_GOOD_CCACHE" = x; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, disabling ccache" >&5 -$as_echo "no, disabling ccache" >&6; } - CCACHE= - else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if C-compiler supports ccache precompiled headers" >&5 -$as_echo_n "checking if C-compiler supports ccache precompiled headers... " >&6; } - PUSHED_FLAGS="$CXXFLAGS" - CXXFLAGS="-fpch-preprocess $CXXFLAGS" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_cxx_try_compile "$LINENO"; then : - CC_KNOWS_CCACHE_TRICK=yes -else - CC_KNOWS_CCACHE_TRICK=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - CXXFLAGS="$PUSHED_FLAGS" - if test "x$CC_KNOWS_CCACHE_TRICK" = xyes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, disabling ccaching of precompiled headers" >&5 -$as_echo "no, disabling ccaching of precompiled headers" >&6; } - CCACHE= - fi - fi - fi - - if test "x$CCACHE" != x; then - CCACHE_SLOPPINESS=time_macros - CCACHE="CCACHE_COMPRESS=1 $SET_CCACHE_DIR CCACHE_SLOPPINESS=$CCACHE_SLOPPINESS $CCACHE" - CCACHE_FLAGS=-fpch-preprocess - - if test "x$SET_CCACHE_DIR" != x; then - mkdir -p $CCACHE_DIR > /dev/null 2>&1 - chmod a+rwxs $CCACHE_DIR > /dev/null 2>&1 - fi - fi - - fi - - -# Used on GNU/Linux systems, can be empty... -#AC_PATH_PROG(ELFDUMP, elfdump) - -# Setup default logging of stdout and stderr to build.log in the output root. -BUILD_LOG='$(OUTPUT_ROOT)/build.log' -BUILD_LOG_WRAPPER='$(SH) $(SRC_ROOT)/common/bin/logger.sh $(BUILD_LOG)' - - - -############################################################################### -# -# Now we check if libjvm.so will use 32 or 64 bit pointers for the C/C++ code. -# (The JVM can use 32 or 64 bit Java pointers but that decision -# is made at runtime.) -# -ac_ext=cpp -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu - -OLD_CXXFLAGS="$CXXFLAGS" -if test "x$HOST_OS" = xsolaris && test "x$with_data_model" != x; then - CXXFLAGS="-m{$with_data_model} $CXXFLAGS" -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 -$as_echo_n "checking for ANSI C header files... " >&6; } -if test "${ac_cv_header_stdc+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -#include -#include - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_cxx_try_compile "$LINENO"; then : - ac_cv_header_stdc=yes -else - ac_cv_header_stdc=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - -if test $ac_cv_header_stdc = yes; then - # SunOS 4.x string.h does not declare mem*, contrary to ANSI. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "memchr" >/dev/null 2>&1; then : - -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "free" >/dev/null 2>&1; then : - -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. - if test "$cross_compiling" = yes; then : - : -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -#if ((' ' & 0x0FF) == 0x020) -# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') -# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) -#else -# define ISLOWER(c) \ - (('a' <= (c) && (c) <= 'i') \ - || ('j' <= (c) && (c) <= 'r') \ - || ('s' <= (c) && (c) <= 'z')) -# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) -#endif - -#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) -int -main () -{ - int i; - for (i = 0; i < 256; i++) - if (XOR (islower (i), ISLOWER (i)) - || toupper (i) != TOUPPER (i)) - return 2; - return 0; -} -_ACEOF -if ac_fn_cxx_try_run "$LINENO"; then : - -else - ac_cv_header_stdc=no -fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ - conftest.$ac_objext conftest.beam conftest.$ac_ext -fi - -fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 -$as_echo "$ac_cv_header_stdc" >&6; } -if test $ac_cv_header_stdc = yes; then - -$as_echo "#define STDC_HEADERS 1" >>confdefs.h - -fi - -# On IRIX 5.3, sys/types and inttypes.h are conflicting. -for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ - inttypes.h stdint.h unistd.h -do : - as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -ac_fn_cxx_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default -" -if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - - -# The cast to long int works around a bug in the HP C Compiler -# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects -# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. -# This bug is HP SR number 8606223364. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of int *" >&5 -$as_echo_n "checking size of int *... " >&6; } -if test "${ac_cv_sizeof_int_p+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if ac_fn_cxx_compute_int "$LINENO" "(long int) (sizeof (int *))" "ac_cv_sizeof_int_p" "$ac_includes_default"; then : - -else - if test "$ac_cv_type_int_p" = yes; then - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error 77 "cannot compute sizeof (int *) -See \`config.log' for more details" "$LINENO" 5 ; } - else - ac_cv_sizeof_int_p=0 - fi -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_int_p" >&5 -$as_echo "$ac_cv_sizeof_int_p" >&6; } - - - -cat >>confdefs.h <<_ACEOF -#define SIZEOF_INT_P $ac_cv_sizeof_int_p -_ACEOF - - -CXXFLAGS="$OLD_CXXFLAGS" -ac_ext=cpp -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu - - -if test "x$ac_cv_sizeof_int_p" = x0; then - # The test failed, lets pick the assumed value. - ARCH_DATA_MODEL=$HOST_CPU_BITS -else - ARCH_DATA_MODEL=`expr 8 \* $ac_cv_sizeof_int_p` -fi - -if test "x$ARCH_DATA_MODEL" = x64; then - A_LP64="LP64:=" - ADD_LP64="-D_LP64=1" -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for host address size" >&5 -$as_echo_n "checking for host address size... " >&6; } -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ARCH_DATA_MODEL bits" >&5 -$as_echo "$ARCH_DATA_MODEL bits" >&6; } -LP64=$A_LP64 - - - -if test "x$ARCH_DATA_MODEL" != "x$HOST_CPU_BITS"; then - as_fn_error $? "The tested number of bits in the host ($ARCH_DATA_MODEL) differs from the number of bits expected to be found in the host ($HOST_CPU_BITS)" "$LINENO" 5 -fi - -############################################################################### -# -# Can the C/C++ compiler use precompiled headers? -# -# Check whether --enable-precompiled-headers was given. -if test "${enable_precompiled_headers+set}" = set; then : - enableval=$enable_precompiled_headers; ENABLE_PRECOMPH=${enable_precompiled-headers} -else - ENABLE_PRECOMPH=yes -fi - - -USE_PRECOMPILED_HEADER=1 -if test "x$ENABLE_PRECOMPH" = xno; then - USE_PRECOMPILED_HEADER=0 -fi - -if test "x$ENABLE_PRECOMPH" = xyes; then - # Check that the compiler actually supports precomp headers. - if test "x$GCC" = xyes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking that precompiled headers work" >&5 -$as_echo_n "checking that precompiled headers work... " >&6; } - echo "int alfa();" > conftest.h - $CXX -x c++-header conftest.h -o conftest.hpp.gch - if test ! -f conftest.hpp.gch; then - echo Precompiled header is not working! - USE_PRECOMPILED_HEADER=0 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - fi - rm -f conftest.h - fi -fi - - - -############################################################################### -# -# How to compile shared libraries. -# - -if test "x$GCC" = xyes; then - COMPILER_NAME=gcc - PICFLAG="-fPIC" - LIBRARY_PREFIX=lib - SHARED_LIBRARY='lib$1.so' - STATIC_LIBRARY='lib$1.a' - SHARED_LIBRARY_FLAGS="-shared" - SHARED_LIBRARY_SUFFIX='.so' - STATIC_LIBRARY_SUFFIX='.a' - OBJ_SUFFIX='.o' - EXE_SUFFIX='' - SET_SHARED_LIBRARY_NAME='-Xlinker -soname=$1' - SET_SHARED_LIBRARY_MAPFILE='-Xlinker -version-script=$1' - C_FLAG_REORDER='' - CXX_FLAG_REORDER='' - SET_SHARED_LIBRARY_ORIGIN='-Xlinker -z -Xlinker origin -Xlinker -rpath -Xlinker \$$$$ORIGIN/$1' - LD="$CC" - LDEXE="$CC" - LDCXX="$CXX" - LDEXECXX="$CXX" - # TODO: for embedded set --strip-unneeded - POST_STRIP_CMD="$STRIP -g" - - # Linking is different on MacOSX - if test "x$BUILD_OS" = xmacosx; then - # Might change in the future to clang. - COMPILER_NAME=gcc - SHARED_LIBRARY='lib$1.dylib' - SHARED_LIBRARY_FLAGS="-dynamiclib -compatibility_version 1.0.0 -current_version 1.0.0 $PICFLAG" - SHARED_LIBRARY_SUFFIX='.dylib' - EXE_SUFFIX='' - SET_SHARED_LIBRARY_NAME='-Xlinker -install_name -Xlinker @rpath/$1' - SET_SHARED_LIBRARY_MAPFILE='' - SET_SHARED_LIBRARY_ORIGIN='-Xlinker -rpath -Xlinker @loader_path/.' - POST_STRIP_CMD="$STRIP -S" - fi -else - if test "x$BUILD_OS" = xsolaris; then - # If it is not gcc, then assume it is the Oracle Solaris Studio Compiler - COMPILER_NAME=ossc - PICFLAG="-KPIC" - LIBRARY_PREFIX=lib - SHARED_LIBRARY='lib$1.so' - STATIC_LIBRARY='lib$1.a' - SHARED_LIBRARY_FLAGS="-G" - SHARED_LIBRARY_SUFFIX='.so' - STATIC_LIBRARY_SUFFIX='.a' - OBJ_SUFFIX='.o' - EXE_SUFFIX='' - SET_SHARED_LIBRARY_NAME='' - SET_SHARED_LIBRARY_MAPFILE='-M $1' - C_FLAG_REORDER='-xF' - CXX_FLAG_REORDER='-xF' - SET_SHARED_LIBRARY_ORIGIN='-R \$$$$ORIGIN/$1' - CFLAGS_JDKLIB_EXTRA='-xstrconst -D__solaris__' - POST_STRIP_CMD="$STRIP -x" - POST_MCS_CMD="$MCS -d -a \"JDK $FULL_VERSION\"" - fi - if test "x$BUILD_OS" = xwindows; then - # If it is not gcc, then assume it is the MS Visual Studio compiler - COMPILER_NAME=cl - PICFLAG="" - LIBRARY_PREFIX= - SHARED_LIBRARY='$1.dll' - STATIC_LIBRARY='$1.lib' - SHARED_LIBRARY_FLAGS="-LD" - SHARED_LIBRARY_SUFFIX='.dll' - STATIC_LIBRARY_SUFFIX='.lib' - OBJ_SUFFIX='.obj' - EXE_SUFFIX='.exe' - SET_SHARED_LIBRARY_NAME='' - SET_SHARED_LIBRARY_MAPFILE='' - SET_SHARED_LIBRARY_ORIGIN='' - fi -fi - - - - - - - - - - - - - - - - - -# The (cross) compiler is now configured, we can now test capabilities -# of the host platform. - -############################################################################### -# -# Is the host little of big endian? -# - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether byte ordering is bigendian" >&5 -$as_echo_n "checking whether byte ordering is bigendian... " >&6; } -if test "${ac_cv_c_bigendian+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - ac_cv_c_bigendian=unknown - # See if we're dealing with a universal compiler. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#ifndef __APPLE_CC__ - not a universal capable compiler - #endif - typedef int dummy; - -_ACEOF -if ac_fn_cxx_try_compile "$LINENO"; then : - - # Check for potential -arch flags. It is not universal unless - # there are at least two -arch flags with different values. - ac_arch= - ac_prev= - for ac_word in $CC $CFLAGS $CPPFLAGS $LDFLAGS; do - if test -n "$ac_prev"; then - case $ac_word in - i?86 | x86_64 | ppc | ppc64) - if test -z "$ac_arch" || test "$ac_arch" = "$ac_word"; then - ac_arch=$ac_word - else - ac_cv_c_bigendian=universal - break - fi - ;; - esac - ac_prev= - elif test "x$ac_word" = "x-arch"; then - ac_prev=arch - fi - done -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - if test $ac_cv_c_bigendian = unknown; then - # See if sys/param.h defines the BYTE_ORDER macro. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include - #include - -int -main () -{ -#if ! (defined BYTE_ORDER && defined BIG_ENDIAN \ - && defined LITTLE_ENDIAN && BYTE_ORDER && BIG_ENDIAN \ - && LITTLE_ENDIAN) - bogus endian macros - #endif - - ; - return 0; -} -_ACEOF -if ac_fn_cxx_try_compile "$LINENO"; then : - # It does; now see whether it defined to BIG_ENDIAN or not. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include - #include - -int -main () -{ -#if BYTE_ORDER != BIG_ENDIAN - not big endian - #endif - - ; - return 0; -} -_ACEOF -if ac_fn_cxx_try_compile "$LINENO"; then : - ac_cv_c_bigendian=yes -else - ac_cv_c_bigendian=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - fi - if test $ac_cv_c_bigendian = unknown; then - # See if defines _LITTLE_ENDIAN or _BIG_ENDIAN (e.g., Solaris). - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include - -int -main () -{ -#if ! (defined _LITTLE_ENDIAN || defined _BIG_ENDIAN) - bogus endian macros - #endif - - ; - return 0; -} -_ACEOF -if ac_fn_cxx_try_compile "$LINENO"; then : - # It does; now see whether it defined to _BIG_ENDIAN or not. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include - -int -main () -{ -#ifndef _BIG_ENDIAN - not big endian - #endif - - ; - return 0; -} -_ACEOF -if ac_fn_cxx_try_compile "$LINENO"; then : - ac_cv_c_bigendian=yes -else - ac_cv_c_bigendian=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - fi - if test $ac_cv_c_bigendian = unknown; then - # Compile a test program. - if test "$cross_compiling" = yes; then : - # Try to guess by grepping values from an object file. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -short int ascii_mm[] = - { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 }; - short int ascii_ii[] = - { 0x694C, 0x5454, 0x656C, 0x6E45, 0x6944, 0x6E61, 0 }; - int use_ascii (int i) { - return ascii_mm[i] + ascii_ii[i]; - } - short int ebcdic_ii[] = - { 0x89D3, 0xE3E3, 0x8593, 0x95C5, 0x89C4, 0x9581, 0 }; - short int ebcdic_mm[] = - { 0xC2C9, 0xC785, 0x95C4, 0x8981, 0x95E2, 0xA8E2, 0 }; - int use_ebcdic (int i) { - return ebcdic_mm[i] + ebcdic_ii[i]; - } - extern int foo; - -int -main () -{ -return use_ascii (foo) == use_ebcdic (foo); - ; - return 0; -} -_ACEOF -if ac_fn_cxx_try_compile "$LINENO"; then : - if grep BIGenDianSyS conftest.$ac_objext >/dev/null; then - ac_cv_c_bigendian=yes - fi - if grep LiTTleEnDian conftest.$ac_objext >/dev/null ; then - if test "$ac_cv_c_bigendian" = unknown; then - ac_cv_c_bigendian=no - else - # finding both strings is unlikely to happen, but who knows? - ac_cv_c_bigendian=unknown - fi - fi -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ - - /* Are we little or big endian? From Harbison&Steele. */ - union - { - long int l; - char c[sizeof (long int)]; - } u; - u.l = 1; - return u.c[sizeof (long int) - 1] == 1; - - ; - return 0; -} -_ACEOF -if ac_fn_cxx_try_run "$LINENO"; then : - ac_cv_c_bigendian=no -else - ac_cv_c_bigendian=yes -fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ - conftest.$ac_objext conftest.beam conftest.$ac_ext -fi - - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_bigendian" >&5 -$as_echo "$ac_cv_c_bigendian" >&6; } - case $ac_cv_c_bigendian in #( - yes) - ENDIAN="big";; #( - no) - ENDIAN="little" ;; #( - universal) - ENDIAN="universal" - ;; #( - *) - ENDIAN="unknown" ;; - esac - - -if test "x$ENDIAN" = xuniversal; then - as_fn_error $? "It seems like someone needs to decide how we are to deal with universal binaries on the MacOSX?" "$LINENO" 5 -fi -if test "x$ENDIAN" = xunknown; then - ENDIAN="$HOST_CPU_ENDIAN" -fi -if test "x$ENDIAN" != "x$HOST_CPU_ENDIAN"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: The tested endian in the host ($ENDIAN) differs from the endian expected to be found in the host ($HOST_CPU_ENDIAN)" >&5 -$as_echo "$as_me: WARNING: The tested endian in the host ($ENDIAN) differs from the endian expected to be found in the host ($HOST_CPU_ENDIAN)" >&2;} - ENDIAN="$HOST_CPU_ENDIAN" -fi - - -############################################################################### -# -# We need a Boot JDK to bootstrap the build. -# -BOOT_JDK_FOUND=no - -# Check whether --with-boot-jdk was given. -if test "${with_boot_jdk+set}" = set; then : - withval=$with_boot_jdk; -fi - - -if test "x$with_boot_jdk" != x; then - BOOT_JDK=$with_boot_jdk - BOOT_JDK_FOUND=yes -fi -if test "x$BOOT_JDK_FOUND" = xno; then - - - if test "x$with_builddeps_server" != x || test "x$with_builddeps_conf" != x; then - # Source the builddeps file again, to make sure it uses the latest variables! - . $builddepsfile - # Look for a host and build machine specific resource! - eval resource=\${builddep_boot-jdk_BUILD_${rewritten_build_var}_HOST_${rewritten_host_var}} - if test "x$resource" = x; then - # Ok, lets instead look for a host specific resource - eval resource=\${builddep_boot-jdk_HOST_${rewritten_host_var}} - fi - if test "x$resource" = x; then - # Ok, lets instead look for a build specific resource - eval resource=\${builddep_boot-jdk_BUILD_${rewritten_build_var}} - fi - if test "x$resource" = x; then - # Ok, lets instead look for a generic resource - # (The boot-jdk comes from M4 and not the shell, thus no need for eval here.) - resource=${builddep_boot-jdk} - fi - if test "x$resource" != x; then - { $as_echo "$as_me:${as_lineno-$LINENO}: Using builddeps $resource for boot-jdk" >&5 -$as_echo "$as_me: Using builddeps $resource for boot-jdk" >&6;} - # If the resource in the builddeps.conf file is an existing directory, - # for example /java/linux/cups - if test -d ${resource}; then - depdir=${resource} - else - -# boot-jdk is for example mymodule -# $resource is for example libs/general/libmymod_1_2_3.zip -# $with_builddeps_server is for example ftp://mybuilddeps.myserver.com/builddeps -# $with_builddeps_dir is for example /localhome/builddeps -# depdir is the name of the variable into which we store the depdir, eg MYMOD -# Will download ftp://mybuilddeps.myserver.com/builddeps/libs/general/libmymod_1_2_3.zip and -# unzip into the directory: /localhome/builddeps/libmymod_1_2_3 - filename=`basename $resource` - filebase=`echo $filename | sed 's/\.[^\.]*$//'` - filebase=${filename%%.*} - extension=${filename#*.} - installdir=$with_builddeps_dir/$filebase - if test ! -f $installdir/$filename.unpacked; then - { $as_echo "$as_me:${as_lineno-$LINENO}: Downloading build dependency boot-jdk from $with_builddeps_server/$resource and installing into $installdir" >&5 -$as_echo "$as_me: Downloading build dependency boot-jdk from $with_builddeps_server/$resource and installing into $installdir" >&6;} - if test ! -d $installdir; then - mkdir -p $installdir - fi - if test ! -d $installdir; then - as_fn_error $? "Could not create directory $installdir" "$LINENO" 5 - fi - tmpfile=`mktemp $installdir/boot-jdk.XXXXXXXXX` - touch $tmpfile - if test ! -f $tmpfile; then - as_fn_error $? "Could not create files in directory $installdir" "$LINENO" 5 - fi - - # $with_builddeps_server/$resource is the ftp://abuilddeps.server.com/libs/cups.zip - # $tmpfile is the local file name for the downloaded file. - VALID_TOOL=no - if test "x$BDEPS_FTP" = xwget; then - VALID_TOOL=yes - wget -O $tmpfile $with_builddeps_server/$resource - fi - if test "x$BDEPS_FTP" = xlftp; then - VALID_TOOL=yes - lftp -c "get $with_builddeps_server/$resource -o $tmpfile" - fi - if test "x$BDEPS_FTP" = xftp; then - VALID_TOOL=yes - FTPSERVER=`echo $with_builddeps_server/$resource | cut -f 3 -d '/'` - FTPPATH=`echo $with_builddeps_server/$resource | cut -f 4- -d '/'` - FTPUSERPWD=${FTPSERVER%%@*} - if test "x$FTPSERVER" != "x$FTPUSERPWD"; then - FTPUSER=${userpwd%%:*} - FTPPWD=${userpwd#*@} - FTPSERVER=${FTPSERVER#*@} - else - FTPUSER=ftp - FTPPWD=ftp - fi - # the "pass" command does not work on some - # ftp clients (read ftp.exe) but if it works, - # passive mode is better! - (\ - echo "user $FTPUSER $FTPPWD" ;\ - echo "pass" ;\ - echo "bin" ;\ - echo "get $FTPPATH $tmpfile" ;\ - ) | ftp -in $FTPSERVER - fi - if test "x$VALID_TOOL" != xyes; then - as_fn_error $? "I do not know how to use the tool: $BDEPS_FTP" "$LINENO" 5 - fi - - mv $tmpfile $installdir/$filename - if test ! -s $installdir/$filename; then - as_fn_error $? "Could not download $with_builddeps_server/$resource" "$LINENO" 5 - fi - case "$extension" in - zip) echo "Unzipping $installdir/$filename..." - (cd $installdir ; rm -f $installdir/$filename.unpacked ; $BDEPS_UNZIP $installdir/$filename > /dev/null && touch $installdir/$filename.unpacked) - ;; - tar.gz) echo "Untaring $installdir/$filename..." - (cd $installdir ; rm -f $installdir/$filename.unpacked ; tar xzf $installdir/$filename && touch $installdir/$filename.unpacked) - ;; - tgz) echo "Untaring $installdir/$filename..." - (cd $installdir ; rm -f $installdir/$filename.unpacked ; tar xzf $installdir/$filename && touch $installdir/$filename.unpacked) - ;; - *) as_fn_error $? "Cannot handle build depency archive with extension $extension" "$LINENO" 5 - ;; - esac - fi - if test -f $installdir/$filename.unpacked; then - depdir=$installdir - fi - - fi - # Source the builddeps file again, because in the previous command, the depdir - # was updated to point at the current build dependency install directory. - . $builddepsfile - # Now extract variables from the builddeps.conf files. - theroot=${builddep_boot-jdk_ROOT} - thecflags=${builddep_boot-jdk_CFLAGS} - thelibs=${builddep_boot-jdk_LIBS} - if test "x$depdir" = x; then - as_fn_error $? "Could not download build dependency boot-jdk" "$LINENO" 5 - fi - BOOT_JDK=$depdir - if test "x$theroot" != x; then - BOOT_JDK="$theroot" - fi - if test "x$thecflags" != x; then - BOOT_JDK_CFLAGS="$thecflags" - fi - if test "x$thelibs" != x; then - BOOT_JDK_LIBS="$thelibs" - fi - BOOT_JDK_FOUND=yes - else BOOT_JDK_FOUND=no - - fi - else BOOT_JDK_FOUND=no - - fi - -fi - -if test "x$BOOT_JDK_FOUND" = xno; then - if test "x$JAVA_HOME" != x; then - if test ! -d "$JAVA_HOME"; then - as_fn_error $? "Your JAVA_HOME points to a non-existing directory!" "$LINENO" 5 - fi - # Aha, the user has set a JAVA_HOME - # let us use that as the Boot JDK. - BOOT_JDK="$JAVA_HOME" - BOOT_JDK_FOUND=yes - # To be on the safe side, lets check that it is a JDK. - if test -x "$BOOT_JDK/bin/javac" && test -x "$BOOT_JDK/bin/java"; then - JAVAC="$BOOT_JDK/bin/javac" - JAVA="$BOOT_JDK/bin/java" - BOOT_JDK_FOUND=yes - else - as_fn_error $? "Your JAVA_HOME points to a JRE! The build needs a JDK! Please point JAVA_HOME to a JDK. JAVA_HOME=$JAVA_HOME" "$LINENO" 5 - fi - fi -fi - -if test "x$BOOT_JDK_FOUND" = xno; then - # Extract the first word of "javac", so it can be a program name with args. -set dummy javac; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_JAVAC_CHECK+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - case $JAVAC_CHECK in - [\\/]* | ?:[\\/]*) - ac_cv_path_JAVAC_CHECK="$JAVAC_CHECK" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_JAVAC_CHECK="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -JAVAC_CHECK=$ac_cv_path_JAVAC_CHECK -if test -n "$JAVAC_CHECK"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $JAVAC_CHECK" >&5 -$as_echo "$JAVAC_CHECK" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - # Extract the first word of "java", so it can be a program name with args. -set dummy java; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_JAVA_CHECK+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - case $JAVA_CHECK in - [\\/]* | ?:[\\/]*) - ac_cv_path_JAVA_CHECK="$JAVA_CHECK" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_JAVA_CHECK="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -JAVA_CHECK=$ac_cv_path_JAVA_CHECK -if test -n "$JAVA_CHECK"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $JAVA_CHECK" >&5 -$as_echo "$JAVA_CHECK" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - BINARY="$JAVAC_CHECK" - if test "x$JAVAC_CHECK" = x; then - BINARY="$JAVA_CHECK" - fi - if test "x$BINARY" != x; then - # So there is a java(c) binary, it might be part of a JDK. - # Lets find the JDK/JRE directory by following symbolic links. - # Linux/GNU systems often have links from /usr/bin/java to - # /etc/alternatives/java to the real JDK binary. - - # Translate long cygdrive or C:\sdfsf path - # into a short mixed mode path that has no - # spaces in it. - tmp="$BINARY" - if test "x$BUILD_OS" = "xwindows"; then - tmp=`$CYGPATH -u "$BINARY"` - tmp=`which "$tmp"` - # If file exists with .exe appended, that's the real filename - # and cygpath needs that to convert to short style path. - if test -f "${tmp}.exe"; then - tmp="${tmp}.exe" - elif test -f "${tmp}.cmd"; then - tmp="${tmp}.cmd" - fi - # Convert to C:/ mixed style path without spaces. - tmp=`$CYGPATH -s -m "$tmp"` - fi - BINARY="$tmp" - - - if test "x$BUILD_OS" != xwindows; then - # Follow a chain of symbolic links. Use readlink - # where it exists, else fall back to horribly - # complicated shell code. - # Extract the first word of "readlink", so it can be a program name with args. -set dummy readlink; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_READLINK+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - case $READLINK in - [\\/]* | ?:[\\/]*) - ac_cv_path_READLINK="$READLINK" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_READLINK="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -READLINK=$ac_cv_path_READLINK -if test -n "$READLINK"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $READLINK" >&5 -$as_echo "$READLINK" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - if test "x$READLINK_TESTED" != yes; then - # On MacOSX there is a readlink tool with a different - # purpose than the GNU readlink tool. Check the found readlink. - ISGNU=`$READLINK --help 2>&1 | grep GNU` - if test "x$ISGNU" = x; then - # A readlink that we do not know how to use. - # Are there other non-GNU readlinks out there? - READLINK_TESTED=yes - READLINK= - fi - fi - - if test "x$READLINK" != x; then - BINARY=`$READLINK -f $BINARY` - else - STARTDIR=$PWD - COUNTER=0 - DIR=`dirname $BINARY` - FIL=`basename $BINARY` - while test $COUNTER -lt 20; do - ISLINK=`ls -l $DIR/$FIL | grep '\->' | sed -e 's/.*-> \(.*\)/\1/'` - if test "x$ISLINK" == x; then - # This is not a symbolic link! We are done! - break - fi - # The link might be relative! We have to use cd to travel safely. - cd $DIR - cd `dirname $ISLINK` - DIR=`pwd` - FIL=`basename $ISLINK` - let COUNTER=COUNTER+1 - done - cd $STARTDIR - BINARY=$DIR/$FIL - fi - fi - - BOOT_JDK=`dirname $BINARY` - BOOT_JDK=`cd $BOOT_JDK/..; pwd` - if test -x $BOOT_JDK/bin/javac && test -x $BOOT_JDK/bin/java; then - JAVAC=$BOOT_JDK/bin/javac - JAVA=$BOOT_JDK/bin/java - BOOT_JDK_FOUND=yes - fi - fi -fi - -if test "x$BOOT_JDK_FOUND" = xno; then - # Try the MacOSX way. - if test -x /usr/libexec/java_home; then - BOOT_JDK=`/usr/libexec/java_home` - if test -x $BOOT_JDK/bin/javac && test -x $BOOT_JDK/bin/java; then - JAVAC=$BOOT_JDK/bin/javac - JAVA=$BOOT_JDK/bin/java - BOOT_JDK_FOUND=yes - fi - fi -fi - -if test "x$BOOT_JDK_FOUND" = xno; then - # Extract the first word of "java", so it can be a program name with args. -set dummy java; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_JAVA_CHECK+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - case $JAVA_CHECK in - [\\/]* | ?:[\\/]*) - ac_cv_path_JAVA_CHECK="$JAVA_CHECK" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_JAVA_CHECK="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -JAVA_CHECK=$ac_cv_path_JAVA_CHECK -if test -n "$JAVA_CHECK"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $JAVA_CHECK" >&5 -$as_echo "$JAVA_CHECK" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - if test "x$JAVA_CHECK" != x; then - # There is a java in the path. But apparently we have not found a javac - # in the path, since that would have been tested earlier. - if test "x$HOST_OS" = xwindows; then - # Now if this is a windows platform. The default installation of a JDK - # actually puts the JRE in the path and keeps the JDK out of the path! - # Go look in the default installation location. - BOOT_JDK=/cygdrive/c/Program\ Files/Java/`ls /cygdrive/c/Program\ Files/Java | grep jdk | sort -r | head --lines 1` - if test -d "$BOOT_JDK"; then - BOOT_JDK_FOUND=yes - fi - fi - if test "x$BOOT_JDK_FOUND" = xno; then - help_on_build_dependency openjdk - as_fn_error $? "Found a JRE, not not a JDK! Please remove the JRE from your path and put a JDK there instead. $HELP_MSG" "$LINENO" 5 - fi - else - help_on_build_dependency openjdk - as_fn_error $? "Could not find a JDK. $HELP_MSG" "$LINENO" 5 - fi -fi - - - if test "x$BUILD_OS" = "xwindows"; then - # Extract the first word of "cygpath", so it can be a program name with args. -set dummy cygpath; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_CYGPATH+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - case $CYGPATH in - [\\/]* | ?:[\\/]*) - ac_cv_path_CYGPATH="$CYGPATH" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_CYGPATH="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -CYGPATH=$ac_cv_path_CYGPATH -if test -n "$CYGPATH"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CYGPATH" >&5 -$as_echo "$CYGPATH" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - tmp="$BOOT_JDK" - # Convert to C:/ mixed style path without spaces. - tmp=`$CYGPATH -s -m "$tmp"` - BOOT_JDK="$tmp" - fi - - -# Now see if we can find the rt.jar, or its nearest equivalent. -BOOT_RTJAR="$BOOT_JDK/jre/lib/rt.jar" - - # Fail with message the path to the Boot JDK rt.jar (or nearest equivalent) if var BOOT_RTJAR contains a path with no spaces in it. - # Unless on Windows, where we can rewrite the path. - HAS_SPACE=`echo "$BOOT_RTJAR" | grep " "` - if test "x$HAS_SPACE" != x; then - if test "x$BUILD_OS" = "xwindows"; then - BOOT_RTJAR=`$CYGPATH -s -m -a "$BOOT_RTJAR"` - BOOT_RTJAR=`$CYGPATH -u "$BOOT_RTJAR"` - else - as_fn_error $? "You cannot have spaces in the path to the Boot JDK rt.jar (or nearest equivalent)! \"$BOOT_RTJAR\"" "$LINENO" 5 - fi - fi - - -BOOT_TOOLSJAR="$BOOT_JDK/lib/tools.jar" - - # Fail with message the path to the Boot JDK tools.jar (or nearest equivalent) if var BOOT_TOOLSJAR contains a path with no spaces in it. - # Unless on Windows, where we can rewrite the path. - HAS_SPACE=`echo "$BOOT_TOOLSJAR" | grep " "` - if test "x$HAS_SPACE" != x; then - if test "x$BUILD_OS" = "xwindows"; then - BOOT_TOOLSJAR=`$CYGPATH -s -m -a "$BOOT_TOOLSJAR"` - BOOT_TOOLSJAR=`$CYGPATH -u "$BOOT_TOOLSJAR"` - else - as_fn_error $? "You cannot have spaces in the path to the Boot JDK tools.jar (or nearest equivalent)! \"$BOOT_TOOLSJAR\"" "$LINENO" 5 - fi - fi - - -if test ! -f $BOOT_RTJAR; then - # On MacOSX it is called classes.jar - BOOT_RTJAR=$BOOT_JDK/../Classes/classes.jar - if test ! -f $BOOT_RTJAR; then - as_fn_error $? "Cannot find the rt.jar or its equivalent!" "$LINENO" 5 - fi - # Remove the .. - BOOT_RTJAR="`cd ${BOOT_RTJAR%/*} && pwd`/${BOOT_RTJAR##*/}" - # The tools.jar is part of classes.jar - BOOT_TOOLSJAR="$BOOT_RTJAR" -fi - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Boot JDK" >&5 -$as_echo_n "checking for Boot JDK... " >&6; } -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $BOOT_JDK" >&5 -$as_echo "$BOOT_JDK" >&6; } -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Boot rt.jar" >&5 -$as_echo_n "checking for Boot rt.jar... " >&6; } -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $BOOT_RTJAR" >&5 -$as_echo "$BOOT_RTJAR" >&6; } -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Boot tools.jar" >&5 -$as_echo_n "checking for Boot tools.jar... " >&6; } -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $BOOT_TOOLSJAR" >&5 -$as_echo "$BOOT_TOOLSJAR" >&6; } - -# Use the java tool from the Boot JDK. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for java in Boot JDK" >&5 -$as_echo_n "checking for java in Boot JDK... " >&6; } -JAVA=$BOOT_JDK/bin/java -if test ! -x $JAVA; then - as_fn_error $? "Could not find a working java" "$LINENO" 5 -fi -BOOT_JDK_VERSION=`$JAVA -version 2>&1 | head -n 1` -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes $BOOT_JDK_VERSION" >&5 -$as_echo "yes $BOOT_JDK_VERSION" >&6; } - - -# Extra M4 quote needed to protect [] in grep expression. -FOUND_VERSION_78=`echo $BOOT_JDK_VERSION | grep '\"1\.[78]\.'` -if test "x$FOUND_VERSION_78" = x; then - help_on_build_dependency openjdk - as_fn_error $? "Your boot-jdk must be version 7 or 8. $HELP_MSG" "$LINENO" 5 -fi - -# When compiling code to be executed by the Boot JDK, force jdk7 compatibility. -BOOT_JDK_SOURCETARGET="-source 7 -target 7" - - -# Use the javac tool from the Boot JDK. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for javac in Boot JDK" >&5 -$as_echo_n "checking for javac in Boot JDK... " >&6; } -JAVAC=$BOOT_JDK/bin/javac -if test ! -x $JAVAC; then - as_fn_error $? "Could not find a working javac" "$LINENO" 5 -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - - - -# Use the javah tool from the Boot JDK. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for javah in Boot JDK" >&5 -$as_echo_n "checking for javah in Boot JDK... " >&6; } -JAVAH=$BOOT_JDK/bin/javah -if test ! -x $JAVAH; then - as_fn_error $? "Could not find a working javah" "$LINENO" 5 -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - - -# Use the jar tool from the Boot JDK. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for jar in Boot JDK" >&5 -$as_echo_n "checking for jar in Boot JDK... " >&6; } -JAR=$BOOT_JDK/bin/jar -if test ! -x $JAR; then - as_fn_error $? "Could not find a working jar" "$LINENO" 5 -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - -# Use the rmic tool from the Boot JDK. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for rmic in Boot JDK" >&5 -$as_echo_n "checking for rmic in Boot JDK... " >&6; } -RMIC=$BOOT_JDK/bin/rmic -if test ! -x $RMIC; then - as_fn_error $? "Could not find a working rmic" "$LINENO" 5 -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - -# Use the native2ascii tool from the Boot JDK. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for native2ascii in Boot JDK" >&5 -$as_echo_n "checking for native2ascii in Boot JDK... " >&6; } -NATIVE2ASCII=$BOOT_JDK/bin/native2ascii -if test ! -x $NATIVE2ASCII; then - as_fn_error $? "Could not find a working native2ascii" "$LINENO" 5 -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - - -############################################################################### -# -# Pickup additional source for a component from outside of the source root -# or override source for a component. -# - -# Check whether --with-add-source-root was given. -if test "${with_add_source_root+set}" = set; then : - withval=$with_add_source_root; -fi - - - -# Check whether --with-override-source-root was given. -if test "${with_override_source_root+set}" = set; then : - withval=$with_override_source_root; -fi - - - -# Check whether --with-adds-and-overrides was given. -if test "${with_adds_and_overrides+set}" = set; then : - withval=$with_adds_and_overrides; -fi - - -if test "x$with_adds_and_overrides" != x; then - with_add_source_root="$with_adds_and_overrides/adds" - with_override_source_root="$with_adds_and_overrides/overrides" -fi - -if test "x$with_add_source_root" != x; then - if ! test -d $with_add_source_root; then - as_fn_error $? "Trying to use a non-existant add-source-root $with_add_source_root" "$LINENO" 5 - fi - CURDIR="$PWD" - cd "$with_add_source_root" - ADD_SRC_ROOT="`pwd`" - cd "$CURDIR" - # Verify that the addon source root does not have any root makefiles. - # If it does, then it is usually an error, prevent this. - if test -f $with_add_source_root/langtools/makefiles/Makefile || \ - test -f $with_add_source_root/langtools/make/Makefile; then - as_fn_error $? "Your add source root seems to contain a full langtools repo! An add source root should only contain additional sources." "$LINENO" 5 - fi - if test -f $with_add_source_root/corba/makefiles/Makefile || \ - test -f $with_add_source_root/corba/make/Makefile; then - as_fn_error $? "Your add source root seems to contain a full corba repo! An add source root should only contain additional sources." "$LINENO" 5 - fi - if test -f $with_add_source_root/jaxp/makefiles/Makefile || \ - test -f $with_add_source_root/jaxp/make/Makefile; then - as_fn_error $? "Your add source root seems to contain a full jaxp repo! An add source root should only contain additional sources." "$LINENO" 5 - fi - if test -f $with_add_source_root/jaxws/makefiles/Makefile || \ - test -f $with_add_source_root/jaxws/make/Makefile; then - as_fn_error $? "Your add source root seems to contain a full jaxws repo! An add source root should only contain additional sources." "$LINENO" 5 - fi - if test -f $with_add_source_root/hotspot/makefiles/Makefile || \ - test -f $with_add_source_root/hotspot/make/Makefile; then - as_fn_error $? "Your add source root seems to contain a full hotspot repo! An add source root should only contain additional sources." "$LINENO" 5 - fi - if test -f $with_add_source_root/jdk/makefiles/Makefile || \ - test -f $with_add_source_root/jdk/make/Makefile; then - as_fn_error $? "Your add source root seems to contain a full JDK repo! An add source root should only contain additional sources." "$LINENO" 5 - fi -fi - - -if test "x$with_override_source_root" != x; then - if ! test -d $with_override_source_root; then - as_fn_error $? "Trying to use a non-existant override-source-root $with_override_source_root" "$LINENO" 5 - fi - CURDIR="$PWD" - cd "$with_override_source_root" - OVERRIDE_SRC_ROOT="`pwd`" - cd "$CURDIR" - if test -f $with_override_source_root/langtools/makefiles/Makefile || \ - test -f $with_override_source_root/langtools/make/Makefile; then - as_fn_error $? "Your override source root seems to contain a full langtools repo! An override source root should only contain sources that override." "$LINENO" 5 - fi - if test -f $with_override_source_root/corba/makefiles/Makefile || \ - test -f $with_override_source_root/corba/make/Makefile; then - as_fn_error $? "Your override source root seems to contain a full corba repo! An override source root should only contain sources that override." "$LINENO" 5 - fi - if test -f $with_override_source_root/jaxp/makefiles/Makefile || \ - test -f $with_override_source_root/jaxp/make/Makefile; then - as_fn_error $? "Your override source root seems to contain a full jaxp repo! An override source root should only contain sources that override." "$LINENO" 5 - fi - if test -f $with_override_source_root/jaxws/makefiles/Makefile || \ - test -f $with_override_source_root/jaxws/make/Makefile; then - as_fn_error $? "Your override source root seems to contain a full jaxws repo! An override source root should only contain sources that override." "$LINENO" 5 - fi - if test -f $with_override_source_root/hotspot/makefiles/Makefile || \ - test -f $with_override_source_root/hotspot/make/Makefile; then - as_fn_error $? "Your override source root seems to contain a full hotspot repo! An override source root should only contain sources that override." "$LINENO" 5 - fi - if test -f $with_override_source_root/jdk/makefiles/Makefile || \ - test -f $with_override_source_root/jdk/make/Makefile; then - as_fn_error $? "Your override source root seems to contain a full JDK repo! An override source root should only contain sources that override." "$LINENO" 5 - fi -fi - - -############################################################################### -# -# Override a repo completely, this is used for example when you have 3 small -# development sandboxes of the langtools sources and want to avoid having 3 full -# OpenJDK sources checked out on disk. -# -# Assuming that the 3 langtools sandboxes are located here: -# /home/fredrik/sandbox1/langtools -# /home/fredrik/sandbox2/langtools -# /home/fredrik/sandbox3/langtools -# -# From the source root you create build subdirs manually: -# mkdir -p build1 build2 build3 -# in each build directory run: -# (cd build1 && ../configure --with-override-langtools=/home/fredrik/sandbox1 && make) -# (cd build2 && ../configure --with-override-langtools=/home/fredrik/sandbox2 && make) -# (cd build3 && ../configure --with-override-langtools=/home/fredrik/sandbox3 && make) -# - - -# Check whether --with-override-langtools was given. -if test "${with_override_langtools+set}" = set; then : - withval=$with_override_langtools; -fi - - - -# Check whether --with-override-corba was given. -if test "${with_override_corba+set}" = set; then : - withval=$with_override_corba; -fi - - - -# Check whether --with-override-jaxp was given. -if test "${with_override_jaxp+set}" = set; then : - withval=$with_override_jaxp; -fi - - - -# Check whether --with-override-jaxws was given. -if test "${with_override_jaxws+set}" = set; then : - withval=$with_override_jaxws; -fi - - - -# Check whether --with-override-hotspot was given. -if test "${with_override_hotspot+set}" = set; then : - withval=$with_override_hotspot; -fi - - - -# Check whether --with-override-jdk was given. -if test "${with_override_jdk+set}" = set; then : - withval=$with_override_jdk; -fi - - -if test "x$with_override_langtools" != x; then - CURDIR="$PWD" - cd "$with_override_langtools" - LANGTOOLS_TOPDIR="`pwd`" - cd "$CURDIR" - if ! test -f $LANGTOOLS_TOPDIR/makefiles/Makefile; then - as_fn_error $? "You have to override langtools with a full langtools repo!" "$LINENO" 5 - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if langtools should be overridden" >&5 -$as_echo_n "checking if langtools should be overridden... " >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes with $LANGTOOLS_TOPDIR" >&5 -$as_echo "yes with $LANGTOOLS_TOPDIR" >&6; } -fi -if test "x$with_override_corba" != x; then - CURDIR="$PWD" - cd "$with_override_corba" - CORBA_TOPDIR="`pwd`" - cd "$CURDIR" - if ! test -f $CORBA_TOPDIR/makefiles/Makefile; then - as_fn_error $? "You have to override corba with a full corba repo!" "$LINENO" 5 - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if corba should be overridden" >&5 -$as_echo_n "checking if corba should be overridden... " >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes with $CORBA_TOPDIR" >&5 -$as_echo "yes with $CORBA_TOPDIR" >&6; } -fi -if test "x$with_override_jaxp" != x; then - CURDIR="$PWD" - cd "$with_override_jaxp" - JAXP_TOPDIR="`pwd`" - cd "$CURDIR" - if ! test -f $JAXP_TOPDIR/makefiles/Makefile; then - as_fn_error $? "You have to override jaxp with a full jaxp repo!" "$LINENO" 5 - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if jaxp should be overridden" >&5 -$as_echo_n "checking if jaxp should be overridden... " >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes with $JAXP_TOPDIR" >&5 -$as_echo "yes with $JAXP_TOPDIR" >&6; } -fi -if test "x$with_override_jaxws" != x; then - CURDIR="$PWD" - cd "$with_override_jaxws" - JAXWS_TOPDIR="`pwd`" - cd "$CURDIR" - if ! test -f $JAXWS_TOPDIR/makefiles/Makefile; then - as_fn_error $? "You have to override jaxws with a full jaxws repo!" "$LINENO" 5 - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if jaxws should be overridden" >&5 -$as_echo_n "checking if jaxws should be overridden... " >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes with $JAXWS_TOPDIR" >&5 -$as_echo "yes with $JAXWS_TOPDIR" >&6; } -fi -if test "x$with_override_hotspot" != x; then - CURDIR="$PWD" - cd "$with_override_hotspot" - HOTSPOT_TOPDIR="`pwd`" - cd "$CURDIR" - if ! test -f $HOTSPOT_TOPDIR/make/Makefile && \ - ! test -f $HOTSPOT_TOPDIR/makefiles/Makefile; then - as_fn_error $? "You have to override hotspot with a full hotspot repo!" "$LINENO" 5 - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if hotspot should be overridden" >&5 -$as_echo_n "checking if hotspot should be overridden... " >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes with $HOTSPOT_TOPDIR" >&5 -$as_echo "yes with $HOTSPOT_TOPDIR" >&6; } -fi -if test "x$with_override_jdk" != x; then - CURDIR="$PWD" - cd "$with_override_jdk" - JDK_TOPDIR="`pwd`" - cd "$CURDIR" - if ! test -f $JDK_TOPDIR/makefiles/Makefile; then - as_fn_error $? "You have to override JDK with a full JDK repo!" "$LINENO" 5 - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if JDK should be overridden" >&5 -$as_echo_n "checking if JDK should be overridden... " >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes with $JDK_TOPDIR" >&5 -$as_echo "yes with $JDK_TOPDIR" >&6; } -fi - -############################################################################### -# -# Specify options for anything that is run with the Boot JDK. -# - -# Check whether --with-boot-jdk-jvmargs was given. -if test "${with_boot_jdk_jvmargs+set}" = set; then : - withval=$with_boot_jdk_jvmargs; -fi - - -if test "x$with_boot_jdk_jvmargs" = x; then - # Not all JVM:s accept the same arguments on the command line. - # OpenJDK specific increase in thread stack for JDK build, - # well more specifically, when running javac. - if test "x$BUILD_NUM_BITS" = x32; then - STACK_SIZE=768 - else - # Running Javac on a JVM on a 64-bit machine, the stack takes more space - # since 64-bit pointers are pushed on the stach. Apparently, we need - # to increase the stack space when javacing the JDK.... - STACK_SIZE=1536 - fi - - # Minimum amount of heap memory. - - # Test if -Xms64M is a valid argument to $JAVA (often is $JAVA passed as $JAVA) - # If so, then append -Xms64M to boot_jdk_jvmargs - FOUND_WARN=`$JAVA -Xms64M -version 2>&1 | grep -i warn` - FOUND_VERSION=`$JAVA -Xms64M -version 2>&1 | grep " version \""` - if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then - boot_jdk_jvmargs="$boot_jdk_jvmargs -Xms64M" - fi - - if test "x$HOST_OS" = "xmacosx"; then - # Why does macosx need more heap? Its the huge JDK batch. - - # Test if -Xmx1600M is a valid argument to $JAVA (often is $JAVA passed as $JAVA) - # If so, then append -Xmx1600M to boot_jdk_jvmargs - FOUND_WARN=`$JAVA -Xmx1600M -version 2>&1 | grep -i warn` - FOUND_VERSION=`$JAVA -Xmx1600M -version 2>&1 | grep " version \""` - if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then - boot_jdk_jvmargs="$boot_jdk_jvmargs -Xmx1600M" - fi - - else - - # Test if -Xmx1100M is a valid argument to $JAVA (often is $JAVA passed as $JAVA) - # If so, then append -Xmx1100M to boot_jdk_jvmargs - FOUND_WARN=`$JAVA -Xmx1100M -version 2>&1 | grep -i warn` - FOUND_VERSION=`$JAVA -Xmx1100M -version 2>&1 | grep " version \""` - if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then - boot_jdk_jvmargs="$boot_jdk_jvmargs -Xmx1100M" - fi - - fi - # When is adding -client something that speeds up the JVM? - # ADD_JVM_ARG_IF_OK([-client],boot_jdk_jvmargs,[$JAVA]) - - # Test if -XX:PermSize=32m is a valid argument to $JAVA (often is $JAVA passed as $JAVA) - # If so, then append -XX:PermSize=32m to boot_jdk_jvmargs - FOUND_WARN=`$JAVA -XX:PermSize=32m -version 2>&1 | grep -i warn` - FOUND_VERSION=`$JAVA -XX:PermSize=32m -version 2>&1 | grep " version \""` - if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then - boot_jdk_jvmargs="$boot_jdk_jvmargs -XX:PermSize=32m" - fi - - - # Test if -XX:MaxPermSize=160m is a valid argument to $JAVA (often is $JAVA passed as $JAVA) - # If so, then append -XX:MaxPermSize=160m to boot_jdk_jvmargs - FOUND_WARN=`$JAVA -XX:MaxPermSize=160m -version 2>&1 | grep -i warn` - FOUND_VERSION=`$JAVA -XX:MaxPermSize=160m -version 2>&1 | grep " version \""` - if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then - boot_jdk_jvmargs="$boot_jdk_jvmargs -XX:MaxPermSize=160m" - fi - - - # Test if -XX:ThreadStackSize=$STACK_SIZE is a valid argument to $JAVA (often is $JAVA passed as $JAVA) - # If so, then append -XX:ThreadStackSize=$STACK_SIZE to boot_jdk_jvmargs - FOUND_WARN=`$JAVA -XX:ThreadStackSize=$STACK_SIZE -version 2>&1 | grep -i warn` - FOUND_VERSION=`$JAVA -XX:ThreadStackSize=$STACK_SIZE -version 2>&1 | grep " version \""` - if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then - boot_jdk_jvmargs="$boot_jdk_jvmargs -XX:ThreadStackSize=$STACK_SIZE" - fi - - # Disable special log output when a debug build is used as Boot JDK... - - # Test if -XX:-PrintVMOptions -XX:-UnlockDiagnosticVMOptions -XX:-LogVMOutput is a valid argument to $JAVA (often is $JAVA passed as $JAVA) - # If so, then append -XX:-PrintVMOptions -XX:-UnlockDiagnosticVMOptions -XX:-LogVMOutput to boot_jdk_jvmargs - FOUND_WARN=`$JAVA -XX:-PrintVMOptions -XX:-UnlockDiagnosticVMOptions -XX:-LogVMOutput -version 2>&1 | grep -i warn` - FOUND_VERSION=`$JAVA -XX:-PrintVMOptions -XX:-UnlockDiagnosticVMOptions -XX:-LogVMOutput -version 2>&1 | grep " version \""` - if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then - boot_jdk_jvmargs="$boot_jdk_jvmargs -XX:-PrintVMOptions -XX:-UnlockDiagnosticVMOptions -XX:-LogVMOutput" - fi - -fi - -BOOT_JDK_JVMARGS=$boot_jdk_jvmargs - - - -# Check whether --with-server-java was given. -if test "${with_server_java+set}" = set; then : - withval=$with_server_java; -fi - - -if test "x$with_server_java" != x; then - SERVER_JAVA="$with_server_java" - FOUND_VERSION=`$SERVER_JAVA -version 2>&1 | grep " version \""` - if test "x$FOUND_VERSION" = x; then - as_fn_error $? "Could not execute server java: $SERVER_JAVA" "$LINENO" 5 - fi -else - SERVER_JAVA="" - # Hotspot specific options. - - # Test if -XX:+UseParallelOldGC is a valid argument to $JAVA (often is $JAVA passed as $JAVA) - # If so, then append -XX:+UseParallelOldGC to SERVER_JAVA - FOUND_WARN=`$JAVA -XX:+UseParallelOldGC -version 2>&1 | grep -i warn` - FOUND_VERSION=`$JAVA -XX:+UseParallelOldGC -version 2>&1 | grep " version \""` - if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then - SERVER_JAVA="$SERVER_JAVA -XX:+UseParallelOldGC" - fi - - - # Test if -verbosegc is a valid argument to $JAVA (often is $JAVA passed as $JAVA) - # If so, then append -verbosegc to SERVER_JAVA - FOUND_WARN=`$JAVA -verbosegc -version 2>&1 | grep -i warn` - FOUND_VERSION=`$JAVA -verbosegc -version 2>&1 | grep " version \""` - if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then - SERVER_JAVA="$SERVER_JAVA -verbosegc" - fi - - # JRockit specific options. - - # Test if -Xverbose:gc is a valid argument to $JAVA (often is $JAVA passed as $JAVA) - # If so, then append -Xverbose:gc to SERVER_JAVA - FOUND_WARN=`$JAVA -Xverbose:gc -version 2>&1 | grep -i warn` - FOUND_VERSION=`$JAVA -Xverbose:gc -version 2>&1 | grep " version \""` - if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then - SERVER_JAVA="$SERVER_JAVA -Xverbose:gc" - fi - - SERVER_JAVA="$JAVA $SERVER_JAVA" -fi - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to use shared server for javac" >&5 -$as_echo_n "checking whether to use shared server for javac... " >&6; } -# Check whether --enable-javac-server was given. -if test "${enable_javac_server+set}" = set; then : - enableval=$enable_javac_server; ENABLE_JAVAC_SERVER="${enableval}" -else - ENABLE_JAVAC_SERVER='no' -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ENABLE_JAVAC_SERVER" >&5 -$as_echo "$ENABLE_JAVAC_SERVER" >&6; } -if test "x$ENABLE_JAVAC_SERVER" = xyes; then - JAVAC_USE_REMOTE=true - JAVAC_SERVERS="$OUTPUT_ROOT/javacservers" -else - JAVAC_USE_REMOTE=false - JAVAC_SERVERS= -fi - - - - -# Check whether --with-javac-server-cores was given. -if test "${with_javac_server_cores+set}" = set; then : - withval=$with_javac_server_cores; -fi - -if test "x$with_javac_server_cores" != x; then - JAVAC_SERVER_CORES="$with_javac_server_cores" -else - if test "$NUM_CORES" -gt 16; then - # We set this arbitrary limit because we want to limit the heap - # size of the javac server. - # In the future we will make the javac compilers in the server - # share more and more state, thus enabling us to use more and - # more concurrent threads in the server. - JAVAC_SERVER_CORES="16" - else - JAVAC_SERVER_CORES="$NUM_CORES" - fi - - if test "$MEMORY_SIZE" -gt "17000"; then - MAX_HEAP_MEM=10000 - - # Test if -d64 is a valid argument to $SERVER_JAVA (often is $JAVA passed as $SERVER_JAVA) - # If so, then append -d64 to SERVER_JAVA - FOUND_WARN=`$SERVER_JAVA -d64 -version 2>&1 | grep -i warn` - FOUND_VERSION=`$SERVER_JAVA -d64 -version 2>&1 | grep " version \""` - if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then - SERVER_JAVA="$SERVER_JAVA -d64" - fi - - - # Test if -Xms10G -Xmx10G is a valid argument to $SERVER_JAVA (often is $JAVA passed as $SERVER_JAVA) - # If so, then append -Xms10G -Xmx10G to SERVER_JAVA - FOUND_WARN=`$SERVER_JAVA -Xms10G -Xmx10G -version 2>&1 | grep -i warn` - FOUND_VERSION=`$SERVER_JAVA -Xms10G -Xmx10G -version 2>&1 | grep " version \""` - if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then - SERVER_JAVA="$SERVER_JAVA -Xms10G -Xmx10G" - fi - - - # Test if -Xmn2G is a valid argument to $SERVER_JAVA (often is $JAVA passed as $SERVER_JAVA) - # If so, then append -Xmn2G to SERVER_JAVA - FOUND_WARN=`$SERVER_JAVA -Xmn2G -version 2>&1 | grep -i warn` - FOUND_VERSION=`$SERVER_JAVA -Xmn2G -version 2>&1 | grep " version \""` - if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then - SERVER_JAVA="$SERVER_JAVA -Xmn2G" - fi - - elif test "$MEMORY_SIZE" -gt "10000"; then - MAX_HEAP_MEM=6000 - - # Test if -d64 is a valid argument to $SERVER_JAVA (often is $JAVA passed as $SERVER_JAVA) - # If so, then append -d64 to SERVER_JAVA - FOUND_WARN=`$SERVER_JAVA -d64 -version 2>&1 | grep -i warn` - FOUND_VERSION=`$SERVER_JAVA -d64 -version 2>&1 | grep " version \""` - if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then - SERVER_JAVA="$SERVER_JAVA -d64" - fi - - - # Test if -Xms6G -Xmx6G is a valid argument to $SERVER_JAVA (often is $JAVA passed as $SERVER_JAVA) - # If so, then append -Xms6G -Xmx6G to SERVER_JAVA - FOUND_WARN=`$SERVER_JAVA -Xms6G -Xmx6G -version 2>&1 | grep -i warn` - FOUND_VERSION=`$SERVER_JAVA -Xms6G -Xmx6G -version 2>&1 | grep " version \""` - if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then - SERVER_JAVA="$SERVER_JAVA -Xms6G -Xmx6G" - fi - - - # Test if -Xmn1G is a valid argument to $SERVER_JAVA (often is $JAVA passed as $SERVER_JAVA) - # If so, then append -Xmn1G to SERVER_JAVA - FOUND_WARN=`$SERVER_JAVA -Xmn1G -version 2>&1 | grep -i warn` - FOUND_VERSION=`$SERVER_JAVA -Xmn1G -version 2>&1 | grep " version \""` - if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then - SERVER_JAVA="$SERVER_JAVA -Xmn1G" - fi - - elif test "$MEMORY_SIZE" -gt "5000"; then - MAX_HEAP_MEM=3000 - - # Test if -d64 is a valid argument to $SERVER_JAVA (often is $JAVA passed as $SERVER_JAVA) - # If so, then append -d64 to SERVER_JAVA - FOUND_WARN=`$SERVER_JAVA -d64 -version 2>&1 | grep -i warn` - FOUND_VERSION=`$SERVER_JAVA -d64 -version 2>&1 | grep " version \""` - if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then - SERVER_JAVA="$SERVER_JAVA -d64" - fi - - - # Test if -Xms1G -Xmx3G is a valid argument to $SERVER_JAVA (often is $JAVA passed as $SERVER_JAVA) - # If so, then append -Xms1G -Xmx3G to SERVER_JAVA - FOUND_WARN=`$SERVER_JAVA -Xms1G -Xmx3G -version 2>&1 | grep -i warn` - FOUND_VERSION=`$SERVER_JAVA -Xms1G -Xmx3G -version 2>&1 | grep " version \""` - if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then - SERVER_JAVA="$SERVER_JAVA -Xms1G -Xmx3G" - fi - - - # Test if -Xmn256M is a valid argument to $SERVER_JAVA (often is $JAVA passed as $SERVER_JAVA) - # If so, then append -Xmn256M to SERVER_JAVA - FOUND_WARN=`$SERVER_JAVA -Xmn256M -version 2>&1 | grep -i warn` - FOUND_VERSION=`$SERVER_JAVA -Xmn256M -version 2>&1 | grep " version \""` - if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then - SERVER_JAVA="$SERVER_JAVA -Xmn256M" - fi - - elif test "$MEMORY_SIZE" -gt "3800"; then - MAX_HEAP_MEM=2500 - - # Test if -Xms1G -Xmx2500M is a valid argument to $SERVER_JAVA (often is $JAVA passed as $SERVER_JAVA) - # If so, then append -Xms1G -Xmx2500M to SERVER_JAVA - FOUND_WARN=`$SERVER_JAVA -Xms1G -Xmx2500M -version 2>&1 | grep -i warn` - FOUND_VERSION=`$SERVER_JAVA -Xms1G -Xmx2500M -version 2>&1 | grep " version \""` - if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then - SERVER_JAVA="$SERVER_JAVA -Xms1G -Xmx2500M" - fi - - - # Test if -Xmn256M is a valid argument to $SERVER_JAVA (often is $JAVA passed as $SERVER_JAVA) - # If so, then append -Xmn256M to SERVER_JAVA - FOUND_WARN=`$SERVER_JAVA -Xmn256M -version 2>&1 | grep -i warn` - FOUND_VERSION=`$SERVER_JAVA -Xmn256M -version 2>&1 | grep " version \""` - if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then - SERVER_JAVA="$SERVER_JAVA -Xmn256M" - fi - - elif test "$MEMORY_SIZE" -gt "1900"; then - MAX_HEAP_MEM=1200 - - # Test if -Xms700M -Xmx1200M is a valid argument to $SERVER_JAVA (often is $JAVA passed as $SERVER_JAVA) - # If so, then append -Xms700M -Xmx1200M to SERVER_JAVA - FOUND_WARN=`$SERVER_JAVA -Xms700M -Xmx1200M -version 2>&1 | grep -i warn` - FOUND_VERSION=`$SERVER_JAVA -Xms700M -Xmx1200M -version 2>&1 | grep " version \""` - if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then - SERVER_JAVA="$SERVER_JAVA -Xms700M -Xmx1200M" - fi - - - # Test if -Xmn256M is a valid argument to $SERVER_JAVA (often is $JAVA passed as $SERVER_JAVA) - # If so, then append -Xmn256M to SERVER_JAVA - FOUND_WARN=`$SERVER_JAVA -Xmn256M -version 2>&1 | grep -i warn` - FOUND_VERSION=`$SERVER_JAVA -Xmn256M -version 2>&1 | grep " version \""` - if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then - SERVER_JAVA="$SERVER_JAVA -Xmn256M" - fi - - elif test "$MEMORY_SIZE" -gt "1000"; then - MAX_HEAP_MEM=900 - - # Test if -Xms400M -Xmx900M is a valid argument to $SERVER_JAVA (often is $JAVA passed as $SERVER_JAVA) - # If so, then append -Xms400M -Xmx900M to SERVER_JAVA - FOUND_WARN=`$SERVER_JAVA -Xms400M -Xmx900M -version 2>&1 | grep -i warn` - FOUND_VERSION=`$SERVER_JAVA -Xms400M -Xmx900M -version 2>&1 | grep " version \""` - if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then - SERVER_JAVA="$SERVER_JAVA -Xms400M -Xmx900M" - fi - - - # Test if -Xmn128M is a valid argument to $SERVER_JAVA (often is $JAVA passed as $SERVER_JAVA) - # If so, then append -Xmn128M to SERVER_JAVA - FOUND_WARN=`$SERVER_JAVA -Xmn128M -version 2>&1 | grep -i warn` - FOUND_VERSION=`$SERVER_JAVA -Xmn128M -version 2>&1 | grep " version \""` - if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then - SERVER_JAVA="$SERVER_JAVA -Xmn128M" - fi - - else - MAX_HEAP_MEM=512 - - # Test if -Xms256M -Xmx512M is a valid argument to $SERVER_JAVA (often is $JAVA passed as $SERVER_JAVA) - # If so, then append -Xms256M -Xmx512M to SERVER_JAVA - FOUND_WARN=`$SERVER_JAVA -Xms256M -Xmx512M -version 2>&1 | grep -i warn` - FOUND_VERSION=`$SERVER_JAVA -Xms256M -Xmx512M -version 2>&1 | grep " version \""` - if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then - SERVER_JAVA="$SERVER_JAVA -Xms256M -Xmx512M" - fi - - - # Test if -Xmn128M is a valid argument to $SERVER_JAVA (often is $JAVA passed as $SERVER_JAVA) - # If so, then append -Xmn128M to SERVER_JAVA - FOUND_WARN=`$SERVER_JAVA -Xmn128M -version 2>&1 | grep -i warn` - FOUND_VERSION=`$SERVER_JAVA -Xmn128M -version 2>&1 | grep " version \""` - if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then - SERVER_JAVA="$SERVER_JAVA -Xmn128M" - fi - - fi - - MAX_COMPILERS_IN_HEAP=`expr $MAX_HEAP_MEM / 501` - if test "$JAVAC_SERVER_CORES" -gt "$MAX_COMPILERS_IN_HEAP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if number of server cores must be reduced" >&5 -$as_echo_n "checking if number of server cores must be reduced... " >&6; } - JAVAC_SERVER_CORES="$MAX_COMPILERS_IN_HEAP" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes, to $JAVAC_SERVER_CORES with max heap size $MAX_HEAP_MEM MB" >&5 -$as_echo "yes, to $JAVAC_SERVER_CORES with max heap size $MAX_HEAP_MEM MB" >&6; } - fi -fi - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to track dependencies between Java packages" >&5 -$as_echo_n "checking whether to track dependencies between Java packages... " >&6; } -# Check whether --enable-javac-deps was given. -if test "${enable_javac_deps+set}" = set; then : - enableval=$enable_javac_deps; ENABLE_JAVAC_DEPS="${enableval}" -else - ENABLE_JAVAC_DEPS='no' -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ENABLE_JAVAC_DEPS" >&5 -$as_echo "$ENABLE_JAVAC_DEPS" >&6; } -if test "x$ENABLE_JAVAC_DEPS" = xyes; then - JAVAC_USE_DEPS=true -else - JAVAC_USE_DEPS=false -fi - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to use multiple cores for javac compilation" >&5 -$as_echo_n "checking whether to use multiple cores for javac compilation... " >&6; } -# Check whether --enable-javac-multi-core was given. -if test "${enable_javac_multi_core+set}" = set; then : - enableval=$enable_javac_multi_core; ENABLE_JAVAC_MULTICORE="${enableval}" -else - ENABLE_JAVAC_MULTICORE='no' -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ENABLE_JAVAC_MULTICORE" >&5 -$as_echo "$ENABLE_JAVAC_MULTICORE" >&6; } -if test "x$ENABLE_JAVAC_MULTICORE" = xyes; then - JAVAC_USE_MODE=MULTI_CORE_CONCURRENT -else - JAVAC_USE_MODE=SINGLE_THREADED_BATCH - if test "x$ENABLE_JAVAC_DEPS" = xyes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Dependency tracking is not supported with single threaded batch compiles of Java source roots. Please add --disable-javac-deps to your configure options." >&5 -$as_echo "$as_me: WARNING: Dependency tracking is not supported with single threaded batch compiles of Java source roots. Please add --disable-javac-deps to your configure options." >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Disabling dependency tracking for you now." >&5 -$as_echo "$as_me: WARNING: Disabling dependency tracking for you now." >&2;} - JAVAC_USE_DEPS=false - fi - if test "x$ENABLE_JAVAC_SERVER" = xyes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: The javac server will not be used since single threaded batch compiles are run within their own JVM. Please add --disable-javac-server to your configure options." >&5 -$as_echo "$as_me: WARNING: The javac server will not be used since single threaded batch compiles are run within their own JVM. Please add --disable-javac-server to your configure options." >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Disabling javac server for you now." >&5 -$as_echo "$as_me: WARNING: Disabling javac server for you now." >&2;} - JAVAC_USE_REMOTE=false - fi -fi - - -############################################################################### -# -# OS specific settings that we never will need to probe. -# -if test "x$HOST_OS" = xlinux; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking what is not needed on Linux?" >&5 -$as_echo_n "checking what is not needed on Linux?... " >&6; } - PULSE_NOT_NEEDED=yes - { $as_echo "$as_me:${as_lineno-$LINENO}: result: pulse" >&5 -$as_echo "pulse" >&6; } -fi - -if test "x$HOST_OS" = xsolaris; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking what is not needed on Solaris?" >&5 -$as_echo_n "checking what is not needed on Solaris?... " >&6; } - ALSA_NOT_NEEDED=yes - PULSE_NOT_NEEDED=yes - { $as_echo "$as_me:${as_lineno-$LINENO}: result: alsa pulse" >&5 -$as_echo "alsa pulse" >&6; } -fi - -if test "x$HOST_OS" = xwindows; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking what is not needed on Windows?" >&5 -$as_echo_n "checking what is not needed on Windows?... " >&6; } - CUPS_NOT_NEEDED=yes - ALSA_NOT_NEEDED=yes - PULSE_NOT_NEEDED=yes - X11_NOT_NEEDED=yes - { $as_echo "$as_me:${as_lineno-$LINENO}: result: alsa cups pulse x11" >&5 -$as_echo "alsa cups pulse x11" >&6; } -fi - -if test "x$HOST_OS" = xmacosx; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking what is not needed on MacOSX?" >&5 -$as_echo_n "checking what is not needed on MacOSX?... " >&6; } - ALSA_NOT_NEEDED=yes - PULSE_NOT_NEEDED=yes - X11_NOT_NEEDED=yes - FREETYPE2_NOT_NEEDED=yes - # If the java runtime framework is disabled, then we need X11. - # This will be adjusted below. - { $as_echo "$as_me:${as_lineno-$LINENO}: result: alsa pulse x11" >&5 -$as_echo "alsa pulse x11" >&6; } -fi - -if test "x$HOST_OS" = xbsd; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking what is not needed on bsd?" >&5 -$as_echo_n "checking what is not needed on bsd?... " >&6; } - ALSA_NOT_NEEDED=yes - { $as_echo "$as_me:${as_lineno-$LINENO}: result: alsa" >&5 -$as_echo "alsa" >&6; } -fi - -############################################################################### -# -# Check for MacOSX support for OpenJDK. If this exists, try to build a JVM -# that uses this API. -# -# Check whether --enable-macosx-runtime-support was given. -if test "${enable_macosx_runtime_support+set}" = set; then : - enableval=$enable_macosx_runtime_support; MACOSX_RUNTIME_SUPPORT="${enableval}" -else - MACOSX_RUNTIME_SUPPORT="no" -fi - - -USE_MACOSX_RUNTIME_SUPPORT=no -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for explicit Java runtime support in the OS" >&5 -$as_echo_n "checking for explicit Java runtime support in the OS... " >&6; } -if test -f /System/Library/Frameworks/JavaVM.framework/Frameworks/JavaRuntimeSupport.framework/Headers/JavaRuntimeSupport.h; then - if test "x$MACOSX_RUNTIME_SUPPORT" != xno; then - MACOSX_RUNTIME_SUPPORT=yes - USE_MACOSX_RUNTIME_SUPPORT=yes - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes, does not need alsa freetype2 pulse and X11" >&5 -$as_echo "yes, does not need alsa freetype2 pulse and X11" >&6; } - else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes, but explicitly disabled." >&5 -$as_echo "yes, but explicitly disabled." >&6; } - fi -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - -if test "x$HOST_OS" = xmacosx && test "x$USE_MACOSX_RUNTIME_SUPPORT" = xno; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking what is not needed on an X11 build on MacOSX?" >&5 -$as_echo_n "checking what is not needed on an X11 build on MacOSX?... " >&6; } - X11_NOT_NEEDED= - FREETYPE2_NOT_NEEDED= - { $as_echo "$as_me:${as_lineno-$LINENO}: result: alsa pulse" >&5 -$as_echo "alsa pulse" >&6; } -fi - -############################################################################### -# -# Check for X Windows -# -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for X" >&5 -$as_echo_n "checking for X... " >&6; } - - -# Check whether --with-x was given. -if test "${with_x+set}" = set; then : - withval=$with_x; -fi - -# $have_x is `yes', `no', `disabled', or empty when we do not yet know. -if test "x$with_x" = xno; then - # The user explicitly disabled X. - have_x=disabled -else - case $x_includes,$x_libraries in #( - *\'*) as_fn_error $? "cannot use X directory names containing '" "$LINENO" 5 ;; #( - *,NONE | NONE,*) if test "${ac_cv_have_x+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - # One or both of the vars are not set, and there is no cached value. -ac_x_includes=no ac_x_libraries=no -rm -f -r conftest.dir -if mkdir conftest.dir; then - cd conftest.dir - cat >Imakefile <<'_ACEOF' -incroot: - @echo incroot='${INCROOT}' -usrlibdir: - @echo usrlibdir='${USRLIBDIR}' -libdir: - @echo libdir='${LIBDIR}' -_ACEOF - if (export CC; ${XMKMF-xmkmf}) >/dev/null 2>/dev/null && test -f Makefile; then - # GNU make sometimes prints "make[1]: Entering ...", which would confuse us. - for ac_var in incroot usrlibdir libdir; do - eval "ac_im_$ac_var=\`\${MAKE-make} $ac_var 2>/dev/null | sed -n 's/^$ac_var=//p'\`" - done - # Open Windows xmkmf reportedly sets LIBDIR instead of USRLIBDIR. - for ac_extension in a so sl dylib la dll; do - if test ! -f "$ac_im_usrlibdir/libX11.$ac_extension" && - test -f "$ac_im_libdir/libX11.$ac_extension"; then - ac_im_usrlibdir=$ac_im_libdir; break - fi - done - # Screen out bogus values from the imake configuration. They are - # bogus both because they are the default anyway, and because - # using them would break gcc on systems where it needs fixed includes. - case $ac_im_incroot in - /usr/include) ac_x_includes= ;; - *) test -f "$ac_im_incroot/X11/Xos.h" && ac_x_includes=$ac_im_incroot;; - esac - case $ac_im_usrlibdir in - /usr/lib | /usr/lib64 | /lib | /lib64) ;; - *) test -d "$ac_im_usrlibdir" && ac_x_libraries=$ac_im_usrlibdir ;; - esac - fi - cd .. - rm -f -r conftest.dir -fi - -# Standard set of common directories for X headers. -# Check X11 before X11Rn because it is often a symlink to the current release. -ac_x_header_dirs=' -/usr/X11/include -/usr/X11R7/include -/usr/X11R6/include -/usr/X11R5/include -/usr/X11R4/include - -/usr/include/X11 -/usr/include/X11R7 -/usr/include/X11R6 -/usr/include/X11R5 -/usr/include/X11R4 - -/usr/local/X11/include -/usr/local/X11R7/include -/usr/local/X11R6/include -/usr/local/X11R5/include -/usr/local/X11R4/include - -/usr/local/include/X11 -/usr/local/include/X11R7 -/usr/local/include/X11R6 -/usr/local/include/X11R5 -/usr/local/include/X11R4 - -/usr/X386/include -/usr/x386/include -/usr/XFree86/include/X11 - -/usr/include -/usr/local/include -/usr/unsupported/include -/usr/athena/include -/usr/local/x11r5/include -/usr/lpp/Xamples/include - -/usr/openwin/include -/usr/openwin/share/include' - -if test "$ac_x_includes" = no; then - # Guess where to find include files, by looking for Xlib.h. - # First, try using that file with no special directory specified. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -_ACEOF -if ac_fn_cxx_try_cpp "$LINENO"; then : - # We can compile using X headers with no special include directory. -ac_x_includes= -else - for ac_dir in $ac_x_header_dirs; do - if test -r "$ac_dir/X11/Xlib.h"; then - ac_x_includes=$ac_dir - break - fi -done -fi -rm -f conftest.err conftest.i conftest.$ac_ext -fi # $ac_x_includes = no - -if test "$ac_x_libraries" = no; then - # Check for the libraries. - # See if we find them without any special options. - # Don't add to $LIBS permanently. - ac_save_LIBS=$LIBS - LIBS="-lX11 $LIBS" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -int -main () -{ -XrmInitialize () - ; - return 0; -} -_ACEOF -if ac_fn_cxx_try_link "$LINENO"; then : - LIBS=$ac_save_LIBS -# We can link X programs with no special library path. -ac_x_libraries= -else - LIBS=$ac_save_LIBS -for ac_dir in `$as_echo "$ac_x_includes $ac_x_header_dirs" | sed s/include/lib/g` -do - # Don't even attempt the hair of trying to link an X program! - for ac_extension in a so sl dylib la dll; do - if test -r "$ac_dir/libX11.$ac_extension"; then - ac_x_libraries=$ac_dir - break 2 - fi - done -done -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi # $ac_x_libraries = no - -case $ac_x_includes,$ac_x_libraries in #( - no,* | *,no | *\'*) - # Didn't find X, or a directory has "'" in its name. - ac_cv_have_x="have_x=no";; #( - *) - # Record where we found X for the cache. - ac_cv_have_x="have_x=yes\ - ac_x_includes='$ac_x_includes'\ - ac_x_libraries='$ac_x_libraries'" -esac -fi -;; #( - *) have_x=yes;; - esac - eval "$ac_cv_have_x" -fi # $with_x != no - -if test "$have_x" != yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $have_x" >&5 -$as_echo "$have_x" >&6; } - no_x=yes -else - # If each of the values was on the command line, it overrides each guess. - test "x$x_includes" = xNONE && x_includes=$ac_x_includes - test "x$x_libraries" = xNONE && x_libraries=$ac_x_libraries - # Update the cache value to reflect the command line values. - ac_cv_have_x="have_x=yes\ - ac_x_includes='$x_includes'\ - ac_x_libraries='$x_libraries'" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: libraries $x_libraries, headers $x_includes" >&5 -$as_echo "libraries $x_libraries, headers $x_includes" >&6; } -fi - -if test "$no_x" = yes; then - # Not all programs may use this symbol, but it does not hurt to define it. - -$as_echo "#define X_DISPLAY_MISSING 1" >>confdefs.h - - X_CFLAGS= X_PRE_LIBS= X_LIBS= X_EXTRA_LIBS= -else - if test -n "$x_includes"; then - X_CFLAGS="$X_CFLAGS -I$x_includes" - fi - - # It would also be nice to do this for all -L options, not just this one. - if test -n "$x_libraries"; then - X_LIBS="$X_LIBS -L$x_libraries" - # For Solaris; some versions of Sun CC require a space after -R and - # others require no space. Words are not sufficient . . . . - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -R must be followed by a space" >&5 -$as_echo_n "checking whether -R must be followed by a space... " >&6; } - ac_xsave_LIBS=$LIBS; LIBS="$LIBS -R$x_libraries" - ac_xsave_cxx_werror_flag=$ac_cxx_werror_flag - ac_cxx_werror_flag=yes - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_cxx_try_link "$LINENO"; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - X_LIBS="$X_LIBS -R$x_libraries" -else - LIBS="$ac_xsave_LIBS -R $x_libraries" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_cxx_try_link "$LINENO"; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - X_LIBS="$X_LIBS -R $x_libraries" -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: neither works" >&5 -$as_echo "neither works" >&6; } -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - ac_cxx_werror_flag=$ac_xsave_cxx_werror_flag - LIBS=$ac_xsave_LIBS - fi - - # Check for system-dependent libraries X programs must link with. - # Do this before checking for the system-independent R6 libraries - # (-lICE), since we may need -lsocket or whatever for X linking. - - if test "$ISC" = yes; then - X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl_s -linet" - else - # Martyn Johnson says this is needed for Ultrix, if the X - # libraries were built with DECnet support. And Karl Berry says - # the Alpha needs dnet_stub (dnet does not exist). - ac_xsave_LIBS="$LIBS"; LIBS="$LIBS $X_LIBS -lX11" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char XOpenDisplay (); -int -main () -{ -return XOpenDisplay (); - ; - return 0; -} -_ACEOF -if ac_fn_cxx_try_link "$LINENO"; then : - -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dnet_ntoa in -ldnet" >&5 -$as_echo_n "checking for dnet_ntoa in -ldnet... " >&6; } -if test "${ac_cv_lib_dnet_dnet_ntoa+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldnet $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dnet_ntoa (); -int -main () -{ -return dnet_ntoa (); - ; - return 0; -} -_ACEOF -if ac_fn_cxx_try_link "$LINENO"; then : - ac_cv_lib_dnet_dnet_ntoa=yes -else - ac_cv_lib_dnet_dnet_ntoa=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dnet_dnet_ntoa" >&5 -$as_echo "$ac_cv_lib_dnet_dnet_ntoa" >&6; } -if test "x$ac_cv_lib_dnet_dnet_ntoa" = x""yes; then : - X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet" -fi - - if test $ac_cv_lib_dnet_dnet_ntoa = no; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dnet_ntoa in -ldnet_stub" >&5 -$as_echo_n "checking for dnet_ntoa in -ldnet_stub... " >&6; } -if test "${ac_cv_lib_dnet_stub_dnet_ntoa+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldnet_stub $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dnet_ntoa (); -int -main () -{ -return dnet_ntoa (); - ; - return 0; -} -_ACEOF -if ac_fn_cxx_try_link "$LINENO"; then : - ac_cv_lib_dnet_stub_dnet_ntoa=yes -else - ac_cv_lib_dnet_stub_dnet_ntoa=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dnet_stub_dnet_ntoa" >&5 -$as_echo "$ac_cv_lib_dnet_stub_dnet_ntoa" >&6; } -if test "x$ac_cv_lib_dnet_stub_dnet_ntoa" = x""yes; then : - X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub" -fi - - fi -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LIBS="$ac_xsave_LIBS" - - # msh@cis.ufl.edu says -lnsl (and -lsocket) are needed for his 386/AT, - # to get the SysV transport functions. - # Chad R. Larson says the Pyramis MIS-ES running DC/OSx (SVR4) - # needs -lnsl. - # The nsl library prevents programs from opening the X display - # on Irix 5.2, according to T.E. Dickey. - # The functions gethostbyname, getservbyname, and inet_addr are - # in -lbsd on LynxOS 3.0.1/i386, according to Lars Hecking. - ac_fn_cxx_check_func "$LINENO" "gethostbyname" "ac_cv_func_gethostbyname" -if test "x$ac_cv_func_gethostbyname" = x""yes; then : - -fi - - if test $ac_cv_func_gethostbyname = no; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for gethostbyname in -lnsl" >&5 -$as_echo_n "checking for gethostbyname in -lnsl... " >&6; } -if test "${ac_cv_lib_nsl_gethostbyname+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lnsl $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char gethostbyname (); -int -main () -{ -return gethostbyname (); - ; - return 0; -} -_ACEOF -if ac_fn_cxx_try_link "$LINENO"; then : - ac_cv_lib_nsl_gethostbyname=yes -else - ac_cv_lib_nsl_gethostbyname=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_nsl_gethostbyname" >&5 -$as_echo "$ac_cv_lib_nsl_gethostbyname" >&6; } -if test "x$ac_cv_lib_nsl_gethostbyname" = x""yes; then : - X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl" -fi - - if test $ac_cv_lib_nsl_gethostbyname = no; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for gethostbyname in -lbsd" >&5 -$as_echo_n "checking for gethostbyname in -lbsd... " >&6; } -if test "${ac_cv_lib_bsd_gethostbyname+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lbsd $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char gethostbyname (); -int -main () -{ -return gethostbyname (); - ; - return 0; -} -_ACEOF -if ac_fn_cxx_try_link "$LINENO"; then : - ac_cv_lib_bsd_gethostbyname=yes -else - ac_cv_lib_bsd_gethostbyname=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_bsd_gethostbyname" >&5 -$as_echo "$ac_cv_lib_bsd_gethostbyname" >&6; } -if test "x$ac_cv_lib_bsd_gethostbyname" = x""yes; then : - X_EXTRA_LIBS="$X_EXTRA_LIBS -lbsd" -fi - - fi - fi - - # lieder@skyler.mavd.honeywell.com says without -lsocket, - # socket/setsockopt and other routines are undefined under SCO ODT - # 2.0. But -lsocket is broken on IRIX 5.2 (and is not necessary - # on later versions), says Simon Leinen: it contains gethostby* - # variants that don't use the name server (or something). -lsocket - # must be given before -lnsl if both are needed. We assume that - # if connect needs -lnsl, so does gethostbyname. - ac_fn_cxx_check_func "$LINENO" "connect" "ac_cv_func_connect" -if test "x$ac_cv_func_connect" = x""yes; then : - -fi - - if test $ac_cv_func_connect = no; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for connect in -lsocket" >&5 -$as_echo_n "checking for connect in -lsocket... " >&6; } -if test "${ac_cv_lib_socket_connect+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lsocket $X_EXTRA_LIBS $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char connect (); -int -main () -{ -return connect (); - ; - return 0; -} -_ACEOF -if ac_fn_cxx_try_link "$LINENO"; then : - ac_cv_lib_socket_connect=yes -else - ac_cv_lib_socket_connect=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_socket_connect" >&5 -$as_echo "$ac_cv_lib_socket_connect" >&6; } -if test "x$ac_cv_lib_socket_connect" = x""yes; then : - X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS" -fi - - fi - - # Guillermo Gomez says -lposix is necessary on A/UX. - ac_fn_cxx_check_func "$LINENO" "remove" "ac_cv_func_remove" -if test "x$ac_cv_func_remove" = x""yes; then : - -fi - - if test $ac_cv_func_remove = no; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for remove in -lposix" >&5 -$as_echo_n "checking for remove in -lposix... " >&6; } -if test "${ac_cv_lib_posix_remove+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lposix $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char remove (); -int -main () -{ -return remove (); - ; - return 0; -} -_ACEOF -if ac_fn_cxx_try_link "$LINENO"; then : - ac_cv_lib_posix_remove=yes -else - ac_cv_lib_posix_remove=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_posix_remove" >&5 -$as_echo "$ac_cv_lib_posix_remove" >&6; } -if test "x$ac_cv_lib_posix_remove" = x""yes; then : - X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix" -fi - - fi - - # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay. - ac_fn_cxx_check_func "$LINENO" "shmat" "ac_cv_func_shmat" -if test "x$ac_cv_func_shmat" = x""yes; then : - -fi - - if test $ac_cv_func_shmat = no; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shmat in -lipc" >&5 -$as_echo_n "checking for shmat in -lipc... " >&6; } -if test "${ac_cv_lib_ipc_shmat+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lipc $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char shmat (); -int -main () -{ -return shmat (); - ; - return 0; -} -_ACEOF -if ac_fn_cxx_try_link "$LINENO"; then : - ac_cv_lib_ipc_shmat=yes -else - ac_cv_lib_ipc_shmat=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_ipc_shmat" >&5 -$as_echo "$ac_cv_lib_ipc_shmat" >&6; } -if test "x$ac_cv_lib_ipc_shmat" = x""yes; then : - X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc" -fi - - fi - fi - - # Check for libraries that X11R6 Xt/Xaw programs need. - ac_save_LDFLAGS=$LDFLAGS - test -n "$x_libraries" && LDFLAGS="$LDFLAGS -L$x_libraries" - # SM needs ICE to (dynamically) link under SunOS 4.x (so we have to - # check for ICE first), but we must link in the order -lSM -lICE or - # we get undefined symbols. So assume we have SM if we have ICE. - # These have to be linked with before -lX11, unlike the other - # libraries we check for below, so use a different variable. - # John Interrante, Karl Berry - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for IceConnectionNumber in -lICE" >&5 -$as_echo_n "checking for IceConnectionNumber in -lICE... " >&6; } -if test "${ac_cv_lib_ICE_IceConnectionNumber+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lICE $X_EXTRA_LIBS $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char IceConnectionNumber (); -int -main () -{ -return IceConnectionNumber (); - ; - return 0; -} -_ACEOF -if ac_fn_cxx_try_link "$LINENO"; then : - ac_cv_lib_ICE_IceConnectionNumber=yes -else - ac_cv_lib_ICE_IceConnectionNumber=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_ICE_IceConnectionNumber" >&5 -$as_echo "$ac_cv_lib_ICE_IceConnectionNumber" >&6; } -if test "x$ac_cv_lib_ICE_IceConnectionNumber" = x""yes; then : - X_PRE_LIBS="$X_PRE_LIBS -lSM -lICE" -fi - - LDFLAGS=$ac_save_LDFLAGS - -fi - - -if test "x$no_x" = xyes && test "x$X11_NOT_NEEDED" != xyes; then - help_on_build_dependency x11 - as_fn_error $? "Could not find X11 libraries. $HELP_MSG" "$LINENO" 5 -fi - -# Some of the old makefiles require a setting of OPENWIN_HOME -# Since the X11R6 directory has disappeared on later Linuxes, -# we need to probe for it. -if test "x$HOST_OS" = xlinux; then - if test -d "$SYS_ROOT/usr/X11R6"; then - OPENWIN_HOME="$SYS_ROOT/usr/X11R6" - fi - if test -d "$SYS_ROOT/usr/include/X11"; then - OPENWIN_HOME="$SYS_ROOT/usr" - fi -fi -if test "x$HOST_OS" = xsolaris; then - OPENWIN_HOME="/usr/openwin" -fi - - - -# -# Weird Sol10 something check...TODO change to try compile -# -if test "x${HOST_OS}" = xsolaris; then - if test "`uname -r`" = "5.10"; then - if test "`${EGREP} -c XLinearGradient ${OPENWIN_HOME}/share/include/X11/extensions/Xrender.h`" = "0"; then - X_CFLAGS="${X_CFLAGS} -DSOLARIS10_NO_XRENDER_STRUCTS" - fi - fi -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -OLD_CFLAGS="$CFLAGS" -CFLAGS="$CFLAGS $X_CFLAGS" - - -for ac_header in X11/extensions/shape.h X11/extensions/Xrender.h X11/extensions/XTest.h -do : - as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" -if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - X11_A_OK=yes -else - X11_A_OK=no -fi - -done - -CFLAGS="$OLD_CFLAGS" -ac_ext=cpp -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu - - -if test "x$X11_A_OK" = xno && test "x$X11_NOT_NEEDED" != xyes; then - help_on_build_dependency x11 - as_fn_error $? "Could not find all X11 headers (shape.h Xrender.h XTest.h). $HELP_MSG" "$LINENO" 5 -fi - - - - -############################################################################### -# -# The common unix printing system cups is used to print from java. -# - -# Check whether --with-cups was given. -if test "${with_cups+set}" = set; then : - withval=$with_cups; -fi - - -# Check whether --with-cups-include was given. -if test "${with_cups_include+set}" = set; then : - withval=$with_cups_include; -fi - - -# Check whether --with-cups-lib was given. -if test "${with_cups_lib+set}" = set; then : - withval=$with_cups_lib; -fi - - -if test "x$CUPS_NOT_NEEDED" = xyes; then - if test "x${with_cups}" != x || test "x${with_cups_include}" != x || test "x${with_cups_lib}" != x; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cups not used, so --with-cups is ignored" >&5 -$as_echo "$as_me: WARNING: cups not used, so --with-cups is ignored" >&2;} - fi - CUPS_CFLAGS= - CUPS_LIBS= -else - CUPS_FOUND=no - - if test "x${with_cups}" = xno || test "x${with_cups_include}" = xno || test "x${with_cups_lib}" = xno; then - as_fn_error $? "It is not possible to disable the use of cups. Remove the --without-cups option." "$LINENO" 5 - fi - - if test "x${with_cups}" != x; then - CUPS_LIBS="-L${with_cups}/lib -lcups" - CUPS_CFLAGS="-I${with_cups}/include" - CUPS_FOUND=yes - fi - if test "x${with_cups_include}" != x; then - CUPS_CFLAGS="-I${with_cups_include}" - CUPS_FOUND=yes - fi - if test "x${with_cups_lib}" != x; then - CUPS_LIBS="-L${with_cups_lib} -lcups" - CUPS_FOUND=yes - fi - if test "x$CUPS_FOUND" = xno; then - - - if test "x$with_builddeps_server" != x || test "x$with_builddeps_conf" != x; then - # Source the builddeps file again, to make sure it uses the latest variables! - . $builddepsfile - # Look for a host and build machine specific resource! - eval resource=\${builddep_cups_BUILD_${rewritten_build_var}_HOST_${rewritten_host_var}} - if test "x$resource" = x; then - # Ok, lets instead look for a host specific resource - eval resource=\${builddep_cups_HOST_${rewritten_host_var}} - fi - if test "x$resource" = x; then - # Ok, lets instead look for a build specific resource - eval resource=\${builddep_cups_BUILD_${rewritten_build_var}} - fi - if test "x$resource" = x; then - # Ok, lets instead look for a generic resource - # (The cups comes from M4 and not the shell, thus no need for eval here.) - resource=${builddep_cups} - fi - if test "x$resource" != x; then - { $as_echo "$as_me:${as_lineno-$LINENO}: Using builddeps $resource for cups" >&5 -$as_echo "$as_me: Using builddeps $resource for cups" >&6;} - # If the resource in the builddeps.conf file is an existing directory, - # for example /java/linux/cups - if test -d ${resource}; then - depdir=${resource} - else - -# cups is for example mymodule -# $resource is for example libs/general/libmymod_1_2_3.zip -# $with_builddeps_server is for example ftp://mybuilddeps.myserver.com/builddeps -# $with_builddeps_dir is for example /localhome/builddeps -# depdir is the name of the variable into which we store the depdir, eg MYMOD -# Will download ftp://mybuilddeps.myserver.com/builddeps/libs/general/libmymod_1_2_3.zip and -# unzip into the directory: /localhome/builddeps/libmymod_1_2_3 - filename=`basename $resource` - filebase=`echo $filename | sed 's/\.[^\.]*$//'` - filebase=${filename%%.*} - extension=${filename#*.} - installdir=$with_builddeps_dir/$filebase - if test ! -f $installdir/$filename.unpacked; then - { $as_echo "$as_me:${as_lineno-$LINENO}: Downloading build dependency cups from $with_builddeps_server/$resource and installing into $installdir" >&5 -$as_echo "$as_me: Downloading build dependency cups from $with_builddeps_server/$resource and installing into $installdir" >&6;} - if test ! -d $installdir; then - mkdir -p $installdir - fi - if test ! -d $installdir; then - as_fn_error $? "Could not create directory $installdir" "$LINENO" 5 - fi - tmpfile=`mktemp $installdir/cups.XXXXXXXXX` - touch $tmpfile - if test ! -f $tmpfile; then - as_fn_error $? "Could not create files in directory $installdir" "$LINENO" 5 - fi - - # $with_builddeps_server/$resource is the ftp://abuilddeps.server.com/libs/cups.zip - # $tmpfile is the local file name for the downloaded file. - VALID_TOOL=no - if test "x$BDEPS_FTP" = xwget; then - VALID_TOOL=yes - wget -O $tmpfile $with_builddeps_server/$resource - fi - if test "x$BDEPS_FTP" = xlftp; then - VALID_TOOL=yes - lftp -c "get $with_builddeps_server/$resource -o $tmpfile" - fi - if test "x$BDEPS_FTP" = xftp; then - VALID_TOOL=yes - FTPSERVER=`echo $with_builddeps_server/$resource | cut -f 3 -d '/'` - FTPPATH=`echo $with_builddeps_server/$resource | cut -f 4- -d '/'` - FTPUSERPWD=${FTPSERVER%%@*} - if test "x$FTPSERVER" != "x$FTPUSERPWD"; then - FTPUSER=${userpwd%%:*} - FTPPWD=${userpwd#*@} - FTPSERVER=${FTPSERVER#*@} - else - FTPUSER=ftp - FTPPWD=ftp - fi - # the "pass" command does not work on some - # ftp clients (read ftp.exe) but if it works, - # passive mode is better! - (\ - echo "user $FTPUSER $FTPPWD" ;\ - echo "pass" ;\ - echo "bin" ;\ - echo "get $FTPPATH $tmpfile" ;\ - ) | ftp -in $FTPSERVER - fi - if test "x$VALID_TOOL" != xyes; then - as_fn_error $? "I do not know how to use the tool: $BDEPS_FTP" "$LINENO" 5 - fi - - mv $tmpfile $installdir/$filename - if test ! -s $installdir/$filename; then - as_fn_error $? "Could not download $with_builddeps_server/$resource" "$LINENO" 5 - fi - case "$extension" in - zip) echo "Unzipping $installdir/$filename..." - (cd $installdir ; rm -f $installdir/$filename.unpacked ; $BDEPS_UNZIP $installdir/$filename > /dev/null && touch $installdir/$filename.unpacked) - ;; - tar.gz) echo "Untaring $installdir/$filename..." - (cd $installdir ; rm -f $installdir/$filename.unpacked ; tar xzf $installdir/$filename && touch $installdir/$filename.unpacked) - ;; - tgz) echo "Untaring $installdir/$filename..." - (cd $installdir ; rm -f $installdir/$filename.unpacked ; tar xzf $installdir/$filename && touch $installdir/$filename.unpacked) - ;; - *) as_fn_error $? "Cannot handle build depency archive with extension $extension" "$LINENO" 5 - ;; - esac - fi - if test -f $installdir/$filename.unpacked; then - depdir=$installdir - fi - - fi - # Source the builddeps file again, because in the previous command, the depdir - # was updated to point at the current build dependency install directory. - . $builddepsfile - # Now extract variables from the builddeps.conf files. - theroot=${builddep_cups_ROOT} - thecflags=${builddep_cups_CFLAGS} - thelibs=${builddep_cups_LIBS} - if test "x$depdir" = x; then - as_fn_error $? "Could not download build dependency cups" "$LINENO" 5 - fi - CUPS=$depdir - if test "x$theroot" != x; then - CUPS="$theroot" - fi - if test "x$thecflags" != x; then - CUPS_CFLAGS="$thecflags" - fi - if test "x$thelibs" != x; then - CUPS_LIBS="$thelibs" - fi - CUPS_FOUND=yes - - fi - - fi - - fi - if test "x$CUPS_FOUND" = xno; then - # Are the cups headers installed in the default /usr/include location? - for ac_header in cups/cups.h cups/ppd.h -do : - as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -ac_fn_cxx_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" -if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - CUPS_FOUND=yes - CUPS_CFLAGS= - CUPS_LIBS="-lcups" - DEFAULT_CUPS=yes -fi - -done - - fi - if test "x$CUPS_FOUND" = xno; then - # Getting nervous now? Lets poke around for standard Solaris third-party - # package installation locations. - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for cups headers and libs" >&5 -$as_echo_n "checking for cups headers and libs... " >&6; } - if test -s /opt/sfw/cups/include/cups/cups.h; then - # An SFW package seems to be installed! - CUPS_FOUND=yes - CUPS_CFLAGS="-I/opt/sfw/cups/include" - CUPS_LIBS="-L/opt/sfw/cups/lib -lcups" - elif test -s /opt/csw/include/cups/cups.h; then - # A CSW package seems to be installed! - CUPS_FOUND=yes - CUPS_CFLAGS="-I/opt/csw/include" - CUPS_LIBS="-L/opt/csw/lib -lcups" - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CUPS_FOUND" >&5 -$as_echo "$CUPS_FOUND" >&6; } - fi - if test "x$CUPS_FOUND" = xno; then - help_on_build_dependency cups - as_fn_error $? "Could not find cups! $HELP_MSG " "$LINENO" 5 - fi -fi - - - - -############################################################################### -# -# The ubiquitous freetype2 library is used to render fonts. -# - -# Check whether --with-freetype was given. -if test "${with_freetype+set}" = set; then : - withval=$with_freetype; -fi - - -# If we are using the OS installed system lib for freetype, then we do not need to copy it to the build tree -USING_SYSTEM_FT_LIB=false - -if test "x$FREETYPE2_NOT_NEEDED" = xyes; then - if test "x$with_freetype" != x || test "x$with_freetype_include" != x || test "x$with_freetype_lib" != x; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: freetype not used, so --with-freetype is ignored" >&5 -$as_echo "$as_me: WARNING: freetype not used, so --with-freetype is ignored" >&2;} - fi - FREETYPE2_CFLAGS= - FREETYPE2_LIBS= - FREETYPE2_LIB_PATH= -else - FREETYPE2_FOUND=no - - if test "x$with_freetype" != x; then - - # Fail with message the path to freetype if var with_freetype contains a path with no spaces in it. - # Unless on Windows, where we can rewrite the path. - HAS_SPACE=`echo "$with_freetype" | grep " "` - if test "x$HAS_SPACE" != x; then - if test "x$BUILD_OS" = "xwindows"; then - with_freetype=`$CYGPATH -s -m -a "$with_freetype"` - with_freetype=`$CYGPATH -u "$with_freetype"` - else - as_fn_error $? "You cannot have spaces in the path to freetype! \"$with_freetype\"" "$LINENO" 5 - fi - fi - - FREETYPE2_LIBS="-L$with_freetype/lib -lfreetype" - if test "x$HOST_OS" = xwindows; then - FREETYPE2_LIBS="$with_freetype/lib/freetype.lib" - fi - FREETYPE2_LIB_PATH="$with_freetype/lib" - FREETYPE2_CFLAGS="-I$with_freetype/include" - if test -s $with_freetype/include/ft2build.h && test -d $with_freetype/include/freetype2/freetype; then - FREETYPE2_CFLAGS="-I$with_freetype/include/freetype2 -I$with_freetype/include" - fi - FREETYPE2_FOUND=yes - if test "x$FREETYPE2_FOUND" = xyes; then - # Verify that the directories exist - if ! test -d "$with_freetype/lib" || ! test -d "$with_freetype/include"; then - as_fn_error $? "Could not find the expected directories $with_freetype/lib and $with_freetype/include" "$LINENO" 5 - fi - # List the contents of the lib. - FREETYPELIB=`ls $with_freetype/lib/libfreetype.so $with_freetype/lib/freetype.dll 2> /dev/null` - if test "x$FREETYPELIB" = x; then - as_fn_error $? "Could not find libfreetype.se nor freetype.dll in $with_freetype/lib" "$LINENO" 5 - fi - # Check one h-file - if ! test -s "$with_freetype/include/ft2build.h"; then - as_fn_error $? "Could not find $with_freetype/include/ft2build.h" "$LINENO" 5 - fi - fi - fi - if test "x$FREETYPE2_FOUND" = xno; then - - - if test "x$with_builddeps_server" != x || test "x$with_builddeps_conf" != x; then - # Source the builddeps file again, to make sure it uses the latest variables! - . $builddepsfile - # Look for a host and build machine specific resource! - eval resource=\${builddep_freetype2_BUILD_${rewritten_build_var}_HOST_${rewritten_host_var}} - if test "x$resource" = x; then - # Ok, lets instead look for a host specific resource - eval resource=\${builddep_freetype2_HOST_${rewritten_host_var}} - fi - if test "x$resource" = x; then - # Ok, lets instead look for a build specific resource - eval resource=\${builddep_freetype2_BUILD_${rewritten_build_var}} - fi - if test "x$resource" = x; then - # Ok, lets instead look for a generic resource - # (The freetype2 comes from M4 and not the shell, thus no need for eval here.) - resource=${builddep_freetype2} - fi - if test "x$resource" != x; then - { $as_echo "$as_me:${as_lineno-$LINENO}: Using builddeps $resource for freetype2" >&5 -$as_echo "$as_me: Using builddeps $resource for freetype2" >&6;} - # If the resource in the builddeps.conf file is an existing directory, - # for example /java/linux/cups - if test -d ${resource}; then - depdir=${resource} - else - -# freetype2 is for example mymodule -# $resource is for example libs/general/libmymod_1_2_3.zip -# $with_builddeps_server is for example ftp://mybuilddeps.myserver.com/builddeps -# $with_builddeps_dir is for example /localhome/builddeps -# depdir is the name of the variable into which we store the depdir, eg MYMOD -# Will download ftp://mybuilddeps.myserver.com/builddeps/libs/general/libmymod_1_2_3.zip and -# unzip into the directory: /localhome/builddeps/libmymod_1_2_3 - filename=`basename $resource` - filebase=`echo $filename | sed 's/\.[^\.]*$//'` - filebase=${filename%%.*} - extension=${filename#*.} - installdir=$with_builddeps_dir/$filebase - if test ! -f $installdir/$filename.unpacked; then - { $as_echo "$as_me:${as_lineno-$LINENO}: Downloading build dependency freetype2 from $with_builddeps_server/$resource and installing into $installdir" >&5 -$as_echo "$as_me: Downloading build dependency freetype2 from $with_builddeps_server/$resource and installing into $installdir" >&6;} - if test ! -d $installdir; then - mkdir -p $installdir - fi - if test ! -d $installdir; then - as_fn_error $? "Could not create directory $installdir" "$LINENO" 5 - fi - tmpfile=`mktemp $installdir/freetype2.XXXXXXXXX` - touch $tmpfile - if test ! -f $tmpfile; then - as_fn_error $? "Could not create files in directory $installdir" "$LINENO" 5 - fi - - # $with_builddeps_server/$resource is the ftp://abuilddeps.server.com/libs/cups.zip - # $tmpfile is the local file name for the downloaded file. - VALID_TOOL=no - if test "x$BDEPS_FTP" = xwget; then - VALID_TOOL=yes - wget -O $tmpfile $with_builddeps_server/$resource - fi - if test "x$BDEPS_FTP" = xlftp; then - VALID_TOOL=yes - lftp -c "get $with_builddeps_server/$resource -o $tmpfile" - fi - if test "x$BDEPS_FTP" = xftp; then - VALID_TOOL=yes - FTPSERVER=`echo $with_builddeps_server/$resource | cut -f 3 -d '/'` - FTPPATH=`echo $with_builddeps_server/$resource | cut -f 4- -d '/'` - FTPUSERPWD=${FTPSERVER%%@*} - if test "x$FTPSERVER" != "x$FTPUSERPWD"; then - FTPUSER=${userpwd%%:*} - FTPPWD=${userpwd#*@} - FTPSERVER=${FTPSERVER#*@} - else - FTPUSER=ftp - FTPPWD=ftp - fi - # the "pass" command does not work on some - # ftp clients (read ftp.exe) but if it works, - # passive mode is better! - (\ - echo "user $FTPUSER $FTPPWD" ;\ - echo "pass" ;\ - echo "bin" ;\ - echo "get $FTPPATH $tmpfile" ;\ - ) | ftp -in $FTPSERVER - fi - if test "x$VALID_TOOL" != xyes; then - as_fn_error $? "I do not know how to use the tool: $BDEPS_FTP" "$LINENO" 5 - fi - - mv $tmpfile $installdir/$filename - if test ! -s $installdir/$filename; then - as_fn_error $? "Could not download $with_builddeps_server/$resource" "$LINENO" 5 - fi - case "$extension" in - zip) echo "Unzipping $installdir/$filename..." - (cd $installdir ; rm -f $installdir/$filename.unpacked ; $BDEPS_UNZIP $installdir/$filename > /dev/null && touch $installdir/$filename.unpacked) - ;; - tar.gz) echo "Untaring $installdir/$filename..." - (cd $installdir ; rm -f $installdir/$filename.unpacked ; tar xzf $installdir/$filename && touch $installdir/$filename.unpacked) - ;; - tgz) echo "Untaring $installdir/$filename..." - (cd $installdir ; rm -f $installdir/$filename.unpacked ; tar xzf $installdir/$filename && touch $installdir/$filename.unpacked) - ;; - *) as_fn_error $? "Cannot handle build depency archive with extension $extension" "$LINENO" 5 - ;; - esac - fi - if test -f $installdir/$filename.unpacked; then - depdir=$installdir - fi - - fi - # Source the builddeps file again, because in the previous command, the depdir - # was updated to point at the current build dependency install directory. - . $builddepsfile - # Now extract variables from the builddeps.conf files. - theroot=${builddep_freetype2_ROOT} - thecflags=${builddep_freetype2_CFLAGS} - thelibs=${builddep_freetype2_LIBS} - if test "x$depdir" = x; then - as_fn_error $? "Could not download build dependency freetype2" "$LINENO" 5 - fi - FREETYPE2=$depdir - if test "x$theroot" != x; then - FREETYPE2="$theroot" - fi - if test "x$thecflags" != x; then - FREETYPE2_CFLAGS="$thecflags" - fi - if test "x$thelibs" != x; then - FREETYPE2_LIBS="$thelibs" - fi - FREETYPE2_FOUND=yes - else FREETYPE2_FOUND=no - - fi - else FREETYPE2_FOUND=no - - fi - - USING_SYSTEM_FT_LIB=true - fi - if test "x$FREETYPE2_FOUND" = xno; then - -pkg_failed=no -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for FREETYPE2" >&5 -$as_echo_n "checking for FREETYPE2... " >&6; } - -if test -n "$FREETYPE2_CFLAGS"; then - pkg_cv_FREETYPE2_CFLAGS="$FREETYPE2_CFLAGS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"freetype2\""; } >&5 - ($PKG_CONFIG --exists --print-errors "freetype2") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_FREETYPE2_CFLAGS=`$PKG_CONFIG --cflags "freetype2" 2>/dev/null` -else - pkg_failed=yes -fi - else - pkg_failed=untried -fi -if test -n "$FREETYPE2_LIBS"; then - pkg_cv_FREETYPE2_LIBS="$FREETYPE2_LIBS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"freetype2\""; } >&5 - ($PKG_CONFIG --exists --print-errors "freetype2") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_FREETYPE2_LIBS=`$PKG_CONFIG --libs "freetype2" 2>/dev/null` -else - pkg_failed=yes -fi - else - pkg_failed=untried -fi - - - -if test $pkg_failed = yes; then - -if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then - _pkg_short_errors_supported=yes -else - _pkg_short_errors_supported=no -fi - if test $_pkg_short_errors_supported = yes; then - FREETYPE2_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "freetype2" 2>&1` - else - FREETYPE2_PKG_ERRORS=`$PKG_CONFIG --print-errors "freetype2" 2>&1` - fi - # Put the nasty error message in config.log where it belongs - echo "$FREETYPE2_PKG_ERRORS" >&5 - - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - FREETYPE2_FOUND=no -elif test $pkg_failed = untried; then - FREETYPE2_FOUND=no -else - FREETYPE2_CFLAGS=$pkg_cv_FREETYPE2_CFLAGS - FREETYPE2_LIBS=$pkg_cv_FREETYPE2_LIBS - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - FREETYPE2_FOUND=yes -fi - USING_SYSTEM_FT_LIB=true - fi - if test "x$FREETYPE2_FOUND" = xno; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for freetype in some standard locations" >&5 -$as_echo_n "checking for freetype in some standard locations... " >&6; } - - if test -s /usr/X11/include/ft2build.h && test -d /usr/X11/include/freetype2/freetype; then - DEFAULT_FREETYPE_CFLAGS="-I/usr/X11/include/freetype2 -I/usr/X11/include" - DEFAULT_FREETYPE_LIBS="-L/usr/X11/lib -lfreetype" - fi - if test -s /usr/include/ft2build.h && test -d /usr/include/freetype2/freetype; then - DEFAULT_FREETYPE_CFLAGS="-I/usr/include/freetype2" - DEFAULT_FREETYPE_LIBS="-lfreetype" - fi - - PREV_CXXCFLAGS="$CXXFLAGS" - PREV_LDFLAGS="$LDFLAGS" - CXXFLAGS="$CXXFLAGS $DEFAULT_FREETYPE_CFLAGS" - LDFLAGS="$LDFLAGS $DEFAULT_FREETYPE_LIBS" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include - #include FT_FREETYPE_H - int main() { return 0; } - -_ACEOF -if ac_fn_cxx_try_link "$LINENO"; then : - - # Yes, the default cflags and libs did the trick. - FREETYPE2_FOUND=yes - FREETYPE2_CFLAGS="$DEFAULT_FREETYPE_CFLAGS" - FREETYPE2_LIBS="$DEFAULT_FREETYPE_LIBS" - -else - - FREETYPE2_FOUND=no - -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - CXXCFLAGS="$PREV_CXXFLAGS" - LDFLAGS="$PREV_LDFLAGS" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $FREETYPE2_FOUND" >&5 -$as_echo "$FREETYPE2_FOUND" >&6; } - USING_SYSTEM_FT_LIB=true - fi - if test "x$FREETYPE2_FOUND" = xno; then - help_on_build_dependency freetype2 - as_fn_error $? "Could not find freetype2! $HELP_MSG " "$LINENO" 5 - fi -fi - - - - - - -############################################################################### -# -# Check for alsa headers and libraries. Used on Linux/GNU systems. -# - -# Check whether --with-alsa was given. -if test "${with_alsa+set}" = set; then : - withval=$with_alsa; -fi - - -# Check whether --with-alsa-include was given. -if test "${with_alsa_include+set}" = set; then : - withval=$with_alsa_include; -fi - - -# Check whether --with-alsa-lib was given. -if test "${with_alsa_lib+set}" = set; then : - withval=$with_alsa_lib; -fi - - -if test "x$ALSA_NOT_NEEDED" = xyes; then - if test "x${with_alsa}" != x || test "x${with_alsa_include}" != x || test "x${with_alsa_lib}" != x; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: alsa not used, so --with-alsa is ignored" >&5 -$as_echo "$as_me: WARNING: alsa not used, so --with-alsa is ignored" >&2;} - fi - ALSA_CFLAGS= - ALSA_LIBS= -else - ALSA_FOUND=no - - if test "x${with_alsa}" = xno || test "x${with_alsa_include}" = xno || test "x${with_alsa_lib}" = xno; then - as_fn_error $? "It is not possible to disable the use of alsa. Remove the --without-alsa option." "$LINENO" 5 - fi - - if test "x${with_alsa}" != x; then - ALSA_LIBS="-L${with_alsa}/lib -lalsa" - ALSA_CFLAGS="-I${with_alsa}/include" - ALSA_FOUND=yes - fi - if test "x${with_alsa_include}" != x; then - ALSA_CFLAGS="-I${with_alsa_include}" - ALSA_FOUND=yes - fi - if test "x${with_alsa_lib}" != x; then - ALSA_LIBS="-L${with_alsa_lib} -lalsa" - ALSA_FOUND=yes - fi - if test "x$ALSA_FOUND" = xno; then - - - if test "x$with_builddeps_server" != x || test "x$with_builddeps_conf" != x; then - # Source the builddeps file again, to make sure it uses the latest variables! - . $builddepsfile - # Look for a host and build machine specific resource! - eval resource=\${builddep_alsa_BUILD_${rewritten_build_var}_HOST_${rewritten_host_var}} - if test "x$resource" = x; then - # Ok, lets instead look for a host specific resource - eval resource=\${builddep_alsa_HOST_${rewritten_host_var}} - fi - if test "x$resource" = x; then - # Ok, lets instead look for a build specific resource - eval resource=\${builddep_alsa_BUILD_${rewritten_build_var}} - fi - if test "x$resource" = x; then - # Ok, lets instead look for a generic resource - # (The alsa comes from M4 and not the shell, thus no need for eval here.) - resource=${builddep_alsa} - fi - if test "x$resource" != x; then - { $as_echo "$as_me:${as_lineno-$LINENO}: Using builddeps $resource for alsa" >&5 -$as_echo "$as_me: Using builddeps $resource for alsa" >&6;} - # If the resource in the builddeps.conf file is an existing directory, - # for example /java/linux/cups - if test -d ${resource}; then - depdir=${resource} - else - -# alsa is for example mymodule -# $resource is for example libs/general/libmymod_1_2_3.zip -# $with_builddeps_server is for example ftp://mybuilddeps.myserver.com/builddeps -# $with_builddeps_dir is for example /localhome/builddeps -# depdir is the name of the variable into which we store the depdir, eg MYMOD -# Will download ftp://mybuilddeps.myserver.com/builddeps/libs/general/libmymod_1_2_3.zip and -# unzip into the directory: /localhome/builddeps/libmymod_1_2_3 - filename=`basename $resource` - filebase=`echo $filename | sed 's/\.[^\.]*$//'` - filebase=${filename%%.*} - extension=${filename#*.} - installdir=$with_builddeps_dir/$filebase - if test ! -f $installdir/$filename.unpacked; then - { $as_echo "$as_me:${as_lineno-$LINENO}: Downloading build dependency alsa from $with_builddeps_server/$resource and installing into $installdir" >&5 -$as_echo "$as_me: Downloading build dependency alsa from $with_builddeps_server/$resource and installing into $installdir" >&6;} - if test ! -d $installdir; then - mkdir -p $installdir - fi - if test ! -d $installdir; then - as_fn_error $? "Could not create directory $installdir" "$LINENO" 5 - fi - tmpfile=`mktemp $installdir/alsa.XXXXXXXXX` - touch $tmpfile - if test ! -f $tmpfile; then - as_fn_error $? "Could not create files in directory $installdir" "$LINENO" 5 - fi - - # $with_builddeps_server/$resource is the ftp://abuilddeps.server.com/libs/cups.zip - # $tmpfile is the local file name for the downloaded file. - VALID_TOOL=no - if test "x$BDEPS_FTP" = xwget; then - VALID_TOOL=yes - wget -O $tmpfile $with_builddeps_server/$resource - fi - if test "x$BDEPS_FTP" = xlftp; then - VALID_TOOL=yes - lftp -c "get $with_builddeps_server/$resource -o $tmpfile" - fi - if test "x$BDEPS_FTP" = xftp; then - VALID_TOOL=yes - FTPSERVER=`echo $with_builddeps_server/$resource | cut -f 3 -d '/'` - FTPPATH=`echo $with_builddeps_server/$resource | cut -f 4- -d '/'` - FTPUSERPWD=${FTPSERVER%%@*} - if test "x$FTPSERVER" != "x$FTPUSERPWD"; then - FTPUSER=${userpwd%%:*} - FTPPWD=${userpwd#*@} - FTPSERVER=${FTPSERVER#*@} - else - FTPUSER=ftp - FTPPWD=ftp - fi - # the "pass" command does not work on some - # ftp clients (read ftp.exe) but if it works, - # passive mode is better! - (\ - echo "user $FTPUSER $FTPPWD" ;\ - echo "pass" ;\ - echo "bin" ;\ - echo "get $FTPPATH $tmpfile" ;\ - ) | ftp -in $FTPSERVER - fi - if test "x$VALID_TOOL" != xyes; then - as_fn_error $? "I do not know how to use the tool: $BDEPS_FTP" "$LINENO" 5 - fi - - mv $tmpfile $installdir/$filename - if test ! -s $installdir/$filename; then - as_fn_error $? "Could not download $with_builddeps_server/$resource" "$LINENO" 5 - fi - case "$extension" in - zip) echo "Unzipping $installdir/$filename..." - (cd $installdir ; rm -f $installdir/$filename.unpacked ; $BDEPS_UNZIP $installdir/$filename > /dev/null && touch $installdir/$filename.unpacked) - ;; - tar.gz) echo "Untaring $installdir/$filename..." - (cd $installdir ; rm -f $installdir/$filename.unpacked ; tar xzf $installdir/$filename && touch $installdir/$filename.unpacked) - ;; - tgz) echo "Untaring $installdir/$filename..." - (cd $installdir ; rm -f $installdir/$filename.unpacked ; tar xzf $installdir/$filename && touch $installdir/$filename.unpacked) - ;; - *) as_fn_error $? "Cannot handle build depency archive with extension $extension" "$LINENO" 5 - ;; - esac - fi - if test -f $installdir/$filename.unpacked; then - depdir=$installdir - fi - - fi - # Source the builddeps file again, because in the previous command, the depdir - # was updated to point at the current build dependency install directory. - . $builddepsfile - # Now extract variables from the builddeps.conf files. - theroot=${builddep_alsa_ROOT} - thecflags=${builddep_alsa_CFLAGS} - thelibs=${builddep_alsa_LIBS} - if test "x$depdir" = x; then - as_fn_error $? "Could not download build dependency alsa" "$LINENO" 5 - fi - ALSA=$depdir - if test "x$theroot" != x; then - ALSA="$theroot" - fi - if test "x$thecflags" != x; then - ALSA_CFLAGS="$thecflags" - fi - if test "x$thelibs" != x; then - ALSA_LIBS="$thelibs" - fi - ALSA_FOUND=yes - else ALSA_FOUND=no - - fi - else ALSA_FOUND=no - - fi - - fi - if test "x$ALSA_FOUND" = xno; then - -pkg_failed=no -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ALSA" >&5 -$as_echo_n "checking for ALSA... " >&6; } - -if test -n "$ALSA_CFLAGS"; then - pkg_cv_ALSA_CFLAGS="$ALSA_CFLAGS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"alsa\""; } >&5 - ($PKG_CONFIG --exists --print-errors "alsa") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_ALSA_CFLAGS=`$PKG_CONFIG --cflags "alsa" 2>/dev/null` -else - pkg_failed=yes -fi - else - pkg_failed=untried -fi -if test -n "$ALSA_LIBS"; then - pkg_cv_ALSA_LIBS="$ALSA_LIBS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"alsa\""; } >&5 - ($PKG_CONFIG --exists --print-errors "alsa") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_ALSA_LIBS=`$PKG_CONFIG --libs "alsa" 2>/dev/null` -else - pkg_failed=yes -fi - else - pkg_failed=untried -fi - - - -if test $pkg_failed = yes; then - -if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then - _pkg_short_errors_supported=yes -else - _pkg_short_errors_supported=no -fi - if test $_pkg_short_errors_supported = yes; then - ALSA_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "alsa" 2>&1` - else - ALSA_PKG_ERRORS=`$PKG_CONFIG --print-errors "alsa" 2>&1` - fi - # Put the nasty error message in config.log where it belongs - echo "$ALSA_PKG_ERRORS" >&5 - - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - ALSA_FOUND=no -elif test $pkg_failed = untried; then - ALSA_FOUND=no -else - ALSA_CFLAGS=$pkg_cv_ALSA_CFLAGS - ALSA_LIBS=$pkg_cv_ALSA_LIBS - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - ALSA_FOUND=yes -fi - fi - if test "x$ALSA_FOUND" = xno; then - for ac_header in alsa/asoundlib.h -do : - ac_fn_cxx_check_header_mongrel "$LINENO" "alsa/asoundlib.h" "ac_cv_header_alsa_asoundlib_h" "$ac_includes_default" -if test "x$ac_cv_header_alsa_asoundlib_h" = x""yes; then : - cat >>confdefs.h <<_ACEOF -#define HAVE_ALSA_ASOUNDLIB_H 1 -_ACEOF - ALSA_FOUND=yes - ALSA_CFLAGS=-Iignoreme - ALSA_LIBS=-lasound - DEFAULT_ALSA=yes -else - ALSA_FOUND=no -fi - -done - - fi - if test "x$ALSA_FOUND" = xno; then - help_on_build_dependency alsa - as_fn_error $? "Could not find alsa! $HELP_MSG " "$LINENO" 5 - fi -fi - - - - -############################################################################### -# -# Check for pulse audio headers and libraries. -# -PULSE_FOUND=no - -# Check whether --with-pulse was given. -if test "${with_pulse+set}" = set; then : - withval=$with_pulse; -fi - - -# Check whether --with-pulse-include was given. -if test "${with_pulse_include+set}" = set; then : - withval=$with_pulse_include; -fi - - -# Check whether --with-pulse-lib was given. -if test "${with_pulse_lib+set}" = set; then : - withval=$with_pulse_lib; -fi - - -if test "x${with_pulse}" != x; then - PULSE_LIBS="-L${with_pulse}/lib -lfreetype" - PULSE_CFLAGS="-I${with_pulse}/include" - PULSE_FOUND=yes -fi -if test "x${with_pulse_include}" != x; then - PULSE_CFLAGS="-I${with_pulse_include}" - PULSE_FOUND=yes -fi -if test "x${with_pulse_lib}" != x; then - PULSE_LIBS="-L${with_pulse_lib} -lpulse" - PULSE_FOUND=yes -fi -if test "x$PULSE_FOUND" = xno; then - - - if test "x$with_builddeps_server" != x || test "x$with_builddeps_conf" != x; then - # Source the builddeps file again, to make sure it uses the latest variables! - . $builddepsfile - # Look for a host and build machine specific resource! - eval resource=\${builddep_pulse_BUILD_${rewritten_build_var}_HOST_${rewritten_host_var}} - if test "x$resource" = x; then - # Ok, lets instead look for a host specific resource - eval resource=\${builddep_pulse_HOST_${rewritten_host_var}} - fi - if test "x$resource" = x; then - # Ok, lets instead look for a build specific resource - eval resource=\${builddep_pulse_BUILD_${rewritten_build_var}} - fi - if test "x$resource" = x; then - # Ok, lets instead look for a generic resource - # (The pulse comes from M4 and not the shell, thus no need for eval here.) - resource=${builddep_pulse} - fi - if test "x$resource" != x; then - { $as_echo "$as_me:${as_lineno-$LINENO}: Using builddeps $resource for pulse" >&5 -$as_echo "$as_me: Using builddeps $resource for pulse" >&6;} - # If the resource in the builddeps.conf file is an existing directory, - # for example /java/linux/cups - if test -d ${resource}; then - depdir=${resource} - else - -# pulse is for example mymodule -# $resource is for example libs/general/libmymod_1_2_3.zip -# $with_builddeps_server is for example ftp://mybuilddeps.myserver.com/builddeps -# $with_builddeps_dir is for example /localhome/builddeps -# depdir is the name of the variable into which we store the depdir, eg MYMOD -# Will download ftp://mybuilddeps.myserver.com/builddeps/libs/general/libmymod_1_2_3.zip and -# unzip into the directory: /localhome/builddeps/libmymod_1_2_3 - filename=`basename $resource` - filebase=`echo $filename | sed 's/\.[^\.]*$//'` - filebase=${filename%%.*} - extension=${filename#*.} - installdir=$with_builddeps_dir/$filebase - if test ! -f $installdir/$filename.unpacked; then - { $as_echo "$as_me:${as_lineno-$LINENO}: Downloading build dependency pulse from $with_builddeps_server/$resource and installing into $installdir" >&5 -$as_echo "$as_me: Downloading build dependency pulse from $with_builddeps_server/$resource and installing into $installdir" >&6;} - if test ! -d $installdir; then - mkdir -p $installdir - fi - if test ! -d $installdir; then - as_fn_error $? "Could not create directory $installdir" "$LINENO" 5 - fi - tmpfile=`mktemp $installdir/pulse.XXXXXXXXX` - touch $tmpfile - if test ! -f $tmpfile; then - as_fn_error $? "Could not create files in directory $installdir" "$LINENO" 5 - fi - - # $with_builddeps_server/$resource is the ftp://abuilddeps.server.com/libs/cups.zip - # $tmpfile is the local file name for the downloaded file. - VALID_TOOL=no - if test "x$BDEPS_FTP" = xwget; then - VALID_TOOL=yes - wget -O $tmpfile $with_builddeps_server/$resource - fi - if test "x$BDEPS_FTP" = xlftp; then - VALID_TOOL=yes - lftp -c "get $with_builddeps_server/$resource -o $tmpfile" - fi - if test "x$BDEPS_FTP" = xftp; then - VALID_TOOL=yes - FTPSERVER=`echo $with_builddeps_server/$resource | cut -f 3 -d '/'` - FTPPATH=`echo $with_builddeps_server/$resource | cut -f 4- -d '/'` - FTPUSERPWD=${FTPSERVER%%@*} - if test "x$FTPSERVER" != "x$FTPUSERPWD"; then - FTPUSER=${userpwd%%:*} - FTPPWD=${userpwd#*@} - FTPSERVER=${FTPSERVER#*@} - else - FTPUSER=ftp - FTPPWD=ftp - fi - # the "pass" command does not work on some - # ftp clients (read ftp.exe) but if it works, - # passive mode is better! - (\ - echo "user $FTPUSER $FTPPWD" ;\ - echo "pass" ;\ - echo "bin" ;\ - echo "get $FTPPATH $tmpfile" ;\ - ) | ftp -in $FTPSERVER - fi - if test "x$VALID_TOOL" != xyes; then - as_fn_error $? "I do not know how to use the tool: $BDEPS_FTP" "$LINENO" 5 - fi - - mv $tmpfile $installdir/$filename - if test ! -s $installdir/$filename; then - as_fn_error $? "Could not download $with_builddeps_server/$resource" "$LINENO" 5 - fi - case "$extension" in - zip) echo "Unzipping $installdir/$filename..." - (cd $installdir ; rm -f $installdir/$filename.unpacked ; $BDEPS_UNZIP $installdir/$filename > /dev/null && touch $installdir/$filename.unpacked) - ;; - tar.gz) echo "Untaring $installdir/$filename..." - (cd $installdir ; rm -f $installdir/$filename.unpacked ; tar xzf $installdir/$filename && touch $installdir/$filename.unpacked) - ;; - tgz) echo "Untaring $installdir/$filename..." - (cd $installdir ; rm -f $installdir/$filename.unpacked ; tar xzf $installdir/$filename && touch $installdir/$filename.unpacked) - ;; - *) as_fn_error $? "Cannot handle build depency archive with extension $extension" "$LINENO" 5 - ;; - esac - fi - if test -f $installdir/$filename.unpacked; then - depdir=$installdir - fi - - fi - # Source the builddeps file again, because in the previous command, the depdir - # was updated to point at the current build dependency install directory. - . $builddepsfile - # Now extract variables from the builddeps.conf files. - theroot=${builddep_pulse_ROOT} - thecflags=${builddep_pulse_CFLAGS} - thelibs=${builddep_pulse_LIBS} - if test "x$depdir" = x; then - as_fn_error $? "Could not download build dependency pulse" "$LINENO" 5 - fi - PULSE=$depdir - if test "x$theroot" != x; then - PULSE="$theroot" - fi - if test "x$thecflags" != x; then - PULSE_CFLAGS="$thecflags" - fi - if test "x$thelibs" != x; then - PULSE_LIBS="$thelibs" - fi - PULSE_FOUND=yes - else PULSE_FOUND=no - - fi - else PULSE_FOUND=no - - fi - -fi -if test "x$PULSE_FOUND" = xno; then - -pkg_failed=no -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for LIBPULSE" >&5 -$as_echo_n "checking for LIBPULSE... " >&6; } - -if test -n "$LIBPULSE_CFLAGS"; then - pkg_cv_LIBPULSE_CFLAGS="$LIBPULSE_CFLAGS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libpulse >= 0.9.11\""; } >&5 - ($PKG_CONFIG --exists --print-errors "libpulse >= 0.9.11") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_LIBPULSE_CFLAGS=`$PKG_CONFIG --cflags "libpulse >= 0.9.11" 2>/dev/null` -else - pkg_failed=yes -fi - else - pkg_failed=untried -fi -if test -n "$LIBPULSE_LIBS"; then - pkg_cv_LIBPULSE_LIBS="$LIBPULSE_LIBS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libpulse >= 0.9.11\""; } >&5 - ($PKG_CONFIG --exists --print-errors "libpulse >= 0.9.11") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_LIBPULSE_LIBS=`$PKG_CONFIG --libs "libpulse >= 0.9.11" 2>/dev/null` -else - pkg_failed=yes -fi - else - pkg_failed=untried -fi - - - -if test $pkg_failed = yes; then - -if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then - _pkg_short_errors_supported=yes -else - _pkg_short_errors_supported=no -fi - if test $_pkg_short_errors_supported = yes; then - LIBPULSE_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "libpulse >= 0.9.11" 2>&1` - else - LIBPULSE_PKG_ERRORS=`$PKG_CONFIG --print-errors "libpulse >= 0.9.11" 2>&1` - fi - # Put the nasty error message in config.log where it belongs - echo "$LIBPULSE_PKG_ERRORS" >&5 - - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - PULSE_FOUND=no -elif test $pkg_failed = untried; then - PULSE_FOUND=no -else - LIBPULSE_CFLAGS=$pkg_cv_LIBPULSE_CFLAGS - LIBPULSE_LIBS=$pkg_cv_LIBPULSE_LIBS - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - PULSE_FOUND=yes -fi -fi -if test "x$PULSE_FOUND" = xno; then - for ac_header in pulse/pulseaudio.h -do : - ac_fn_cxx_check_header_mongrel "$LINENO" "pulse/pulseaudio.h" "ac_cv_header_pulse_pulseaudio_h" "$ac_includes_default" -if test "x$ac_cv_header_pulse_pulseaudio_h" = x""yes; then : - cat >>confdefs.h <<_ACEOF -#define HAVE_PULSE_PULSEAUDIO_H 1 -_ACEOF - PULSE_FOUND=yes - PULSE_CFLAGS=-Iignoreme - PULSE_LIBS= - DEFAULT_PULSE=yes -else - PULSE_FOUND=no -fi - -done - -fi - -if test "x$PULSE_FOUND" = xno && test "x$PULSE_NOT_NEEDED" != xyes; then - help_on_build_dependency pulse - as_fn_error $? "Could not find pulse audio libraries. $HELP_MSG " "$LINENO" 5 -fi - - - - -############################################################################### -# -# Check for the jpeg library -# - -USE_EXTERNAL_LIBJPEG=true -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for main in -ljpeg" >&5 -$as_echo_n "checking for main in -ljpeg... " >&6; } -if test "${ac_cv_lib_jpeg_main+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ljpeg $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - - -int -main () -{ -return main (); - ; - return 0; -} -_ACEOF -if ac_fn_cxx_try_link "$LINENO"; then : - ac_cv_lib_jpeg_main=yes -else - ac_cv_lib_jpeg_main=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_jpeg_main" >&5 -$as_echo "$ac_cv_lib_jpeg_main" >&6; } -if test "x$ac_cv_lib_jpeg_main" = x""yes; then : - cat >>confdefs.h <<_ACEOF -#define HAVE_LIBJPEG 1 -_ACEOF - - LIBS="-ljpeg $LIBS" - -else - USE_EXTERNAL_LIBJPEG=false - { $as_echo "$as_me:${as_lineno-$LINENO}: Will use jpeg decoder bundled with the OpenJDK source" >&5 -$as_echo "$as_me: Will use jpeg decoder bundled with the OpenJDK source" >&6;} - -fi - - - -############################################################################### -# -# Check for the gif library -# - -USE_EXTERNAL_LIBJPEG=true -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for main in -lgif" >&5 -$as_echo_n "checking for main in -lgif... " >&6; } -if test "${ac_cv_lib_gif_main+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lgif $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - - -int -main () -{ -return main (); - ; - return 0; -} -_ACEOF -if ac_fn_cxx_try_link "$LINENO"; then : - ac_cv_lib_gif_main=yes -else - ac_cv_lib_gif_main=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_gif_main" >&5 -$as_echo "$ac_cv_lib_gif_main" >&6; } -if test "x$ac_cv_lib_gif_main" = x""yes; then : - cat >>confdefs.h <<_ACEOF -#define HAVE_LIBGIF 1 -_ACEOF - - LIBS="-lgif $LIBS" - -else - USE_EXTERNAL_LIBGIF=false - { $as_echo "$as_me:${as_lineno-$LINENO}: Will use gif decoder bundled with the OpenJDK source" >&5 -$as_echo "$as_me: Will use gif decoder bundled with the OpenJDK source" >&6;} - -fi - - - -############################################################################### -# -# Check for the zlib library -# - -USE_EXTERNAL_LIBZ=true -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for main in -lz" >&5 -$as_echo_n "checking for main in -lz... " >&6; } -if test "${ac_cv_lib_z_main+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lz $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - - -int -main () -{ -return main (); - ; - return 0; -} -_ACEOF -if ac_fn_cxx_try_link "$LINENO"; then : - ac_cv_lib_z_main=yes -else - ac_cv_lib_z_main=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_z_main" >&5 -$as_echo "$ac_cv_lib_z_main" >&6; } -if test "x$ac_cv_lib_z_main" = x""yes; then : - cat >>confdefs.h <<_ACEOF -#define HAVE_LIBZ 1 -_ACEOF - - LIBS="-lz $LIBS" - -else - USE_EXTERNAL_LIBZ=false - { $as_echo "$as_me:${as_lineno-$LINENO}: Will use zlib bundled with the OpenJDK source" >&5 -$as_echo "$as_me: Will use zlib bundled with the OpenJDK source" >&6;} - -fi - - - -############################################################################### -# -# Check if altzone exists in time.h -# - -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -int -main () -{ -return (int)altzone; - ; - return 0; -} -_ACEOF -if ac_fn_cxx_try_link "$LINENO"; then : - has_altzone=yes -else - has_altzone=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -if test "x$has_altzone" = xyes; then - -$as_echo "#define HAVE_ALTZONE 1" >>confdefs.h - -fi - -############################################################################### -# -# Check the maths library -# - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for cos in -lm" >&5 -$as_echo_n "checking for cos in -lm... " >&6; } -if test "${ac_cv_lib_m_cos+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lm $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char cos (); -int -main () -{ -return cos (); - ; - return 0; -} -_ACEOF -if ac_fn_cxx_try_link "$LINENO"; then : - ac_cv_lib_m_cos=yes -else - ac_cv_lib_m_cos=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_cos" >&5 -$as_echo "$ac_cv_lib_m_cos" >&6; } -if test "x$ac_cv_lib_m_cos" = x""yes; then : - cat >>confdefs.h <<_ACEOF -#define HAVE_LIBM 1 -_ACEOF - - LIBS="-lm $LIBS" - -else - - { $as_echo "$as_me:${as_lineno-$LINENO}: Maths library was not found" >&5 -$as_echo "$as_me: Maths library was not found" >&6;} - -fi - - - -############################################################################### -# -# Check for libdl.so - -save_LIBS="$LIBS" -LIBS="" -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 -$as_echo_n "checking for dlopen in -ldl... " >&6; } -if test "${ac_cv_lib_dl_dlopen+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldl $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dlopen (); -int -main () -{ -return dlopen (); - ; - return 0; -} -_ACEOF -if ac_fn_cxx_try_link "$LINENO"; then : - ac_cv_lib_dl_dlopen=yes -else - ac_cv_lib_dl_dlopen=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 -$as_echo "$ac_cv_lib_dl_dlopen" >&6; } -if test "x$ac_cv_lib_dl_dlopen" = x""yes; then : - cat >>confdefs.h <<_ACEOF -#define HAVE_LIBDL 1 -_ACEOF - - LIBS="-ldl $LIBS" - -fi - -LIBDL="$LIBS" - -LIBS="$save_LIBS" - -############################################################################### -# -# Should we run the painfully slow javadoc tool? -# -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build documentation" >&5 -$as_echo_n "checking whether to build documentation... " >&6; } -# Check whether --enable-docs was given. -if test "${enable_docs+set}" = set; then : - enableval=$enable_docs; ENABLE_DOCS="${enableval}" -else - ENABLE_DOCS='no' -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ENABLE_DOCS" >&5 -$as_echo "$ENABLE_DOCS" >&6; } - -GENERATE_DOCS=false -if test "x$ENABLE_DOCS" = xyes; then - GENERATE_DOCS=true -fi - - -############################################################################### -# -# Should we compile nimbus swing L&F? We can probably remove this option -# since nimbus is officially part of javax now. -# -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build nimbus L&F" >&5 -$as_echo_n "checking whether to build nimbus L&F... " >&6; } -# Check whether --enable-nimbus was given. -if test "${enable_nimbus+set}" = set; then : - enableval=$enable_nimbus; ENABLE_NIMBUS="${enableval}" -else - ENABLE_NIMBUS='yes' -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ENABLE_NIMBUS" >&5 -$as_echo "$ENABLE_NIMBUS" >&6; } -DISABLE_NIMBUS= -if test "x$ENABLE_NIMBUS" = xno; then - DISABLE_NIMBUS=true -fi - - -############################################################################### -# -# Setup the opt flags for different compilers -# and different operating systems. -# -C_FLAG_DEPS="-MMD -MF" -CXX_FLAG_DEPS="-MMD -MF" - -case $COMPILER_TYPE in - CC ) - D_FLAG="-g" - case $COMPILER_NAME in - gcc ) - case $PLATFORM in - macosx ) - # On MacOSX we optimize for size, something - # we should do for all platforms? - C_O_FLAG_HI="-Os" - C_O_FLAG_NORM="-Os" - C_O_FLAG_NONE="" - ;; - *) - C_O_FLAG_HI="-O3" - C_O_FLAG_NORM="-O2" - C_O_FLAG_NONE="-O0" - ;; - esac - CXX_O_FLAG_HI="$C_O_FLAG_HI" - CXX_O_FLAG_NORM="$C_O_FLAG_NORM" - CXX_O_FLAG_NONE="$C_O_FLAG_NONE" - ;; - ossc ) - # - # Forte has different names for this with their C++ compiler... - # - CXX_FLAG_DEPS="-xMMD -xMF" - -# Extra options used with HIGHEST -# -# WARNING: Use of OPTIMIZATION_LEVEL=HIGHEST in your Makefile needs to be -# done with care, there are some assumptions below that need to -# be understood about the use of pointers, and IEEE behavior. -# -# Use non-standard floating point mode (not IEEE 754) -CC_HIGHEST="$CC_HIGHEST -fns" -# Do some simplification of floating point arithmetic (not IEEE 754) -CC_HIGHEST="$CC_HIGHEST -fsimple" -# Use single precision floating point with 'float' -CC_HIGHEST="$CC_HIGHEST -fsingle" -# Assume memory references via basic pointer types do not alias -# (Source with excessing pointer casting and data access with mixed -# pointer types are not recommended) -CC_HIGHEST="$CC_HIGHEST -xalias_level=basic" -# Use intrinsic or inline versions for math/std functions -# (If you expect perfect errno behavior, do not use this) -CC_HIGHEST="$CC_HIGHEST -xbuiltin=%all" -# Loop data dependency optimizations (need -xO3 or higher) -CC_HIGHEST="$CC_HIGHEST -xdepend" -# Pointer parameters to functions do not overlap -# (Similar to -xalias_level=basic usage, but less obvious sometimes. -# If you pass in multiple pointers to the same data, do not use this) -CC_HIGHEST="$CC_HIGHEST -xrestrict" -# Inline some library routines -# (If you expect perfect errno behavior, do not use this) -CC_HIGHEST="$CC_HIGHEST -xlibmil" -# Use optimized math routines -# (If you expect perfect errno behavior, do not use this) -# Can cause undefined external on Solaris 8 X86 on __sincos, removing for now -#CC_HIGHEST="$CC_HIGHEST -xlibmopt" - - case $LEGACY_HOST_CPU1 in - i586) - C_O_FLAG_HIGHEST="-xO4 -Wu,-O4~yz $CC_HIGHEST -xchip=pentium" - C_O_FLAG_HI="-xO4 -Wu,-O4~yz" - C_O_FLAG_NORM="-xO2 -Wu,-O2~yz" - C_O_FLAG_NONE="" - CXX_O_FLAG_HIGHEST="-xO4 -Qoption ube -O4~yz $CC_HIGHEST -xchip=pentium" - CXX_O_FLAG_HI="-xO4 -Qoption ube -O4~yz" - CXX_O_FLAG_NORM="-xO2 -Qoption ube -O2~yz" - CXX_O_FLAG_NONE="" - ;; - sparc) - C_O_FLAG_HIGHEST="-xO4 -Wc,-Qrm-s -Wc,-Qiselect-T0 $CC_HIGHEST -xprefetch=auto,explicit -xchip=ultra" - C_O_FLAG_HI="-xO4 -Wc,-Qrm-s -Wc,-Qiselect-T0" - C_O_FLAG_NORM="-xO2 -Wc,-Qrm-s -Wc,-Qiselect-T0" - C_O_FLAG_NONE="" - CXX_O_FLAG_HIGHEST="-xO4 -Qoption cg -Qrm-s -Qoption cg -Qiselect-T0 $CC_HIGHEST -xprefetch=auto,explicit -xchip=ultra" - CXX_O_FLAG_HI="-xO4 -Qoption cg -Qrm-s -Qoption cg -Qiselect-T0" - CXX_O_FLAG_NORM="-xO2 -Qoption cg -Qrm-s -Qoption cg -Qiselect-T0" - CXX_O_FLAG_NONE="" - ;; - esac - esac - ;; - CL ) - D_FLAG= - C_O_FLAG_HI="-O2" - C_O_FLAG_NORM="-O1" - C_O_FLAG_NONE="-Od" - CXX_O_FLAG_HI="$C_O_FLAG_HI" - CXX_O_FLAG_NORM="$C_O_FLAG_NORM" - CXX_O_FLAG_NONE="$C_O_FLAG_NONE" - ;; -esac - -if test -z "$C_O_FLAG_HIGHEST"; then - C_O_FLAG_HIGHEST="$C_O_FLAG_HI" -fi - -if test -z "$CXX_O_FLAG_HIGHEST"; then - CXX_O_FLAG_HIGHEST="$CXX_O_FLAG_HI" -fi - - - - - - - - - - - - -############################################################################### -# -# Setup legacy vars/targets and new vars to deal with different debug levels. -# -case $DEBUG_LEVEL in - release ) - HOTSPOT_DEBUG_LEVEL="product" - HOTSPOT_EXPORT="product" - ;; - fastdebug ) - HOTSPOT_DEBUG_LEVEL="fastdebug" - HOTSPOT_EXPORT="fastdebug" - CFLAGS="$CFLAGS $D_FLAG" - JAVAC_FLAGS="$JAVAC_FLAGS -g" - ;; - slowdebug ) - HOTSPOT_DEBUG_LEVEL="jvmg" - HOTSPOT_EXPORT="debug" - CFLAGS="$CFLAGS $D_FLAG" - C_O_FLAG_HI="$C_O_FLAG_NONE" - C_O_FLAG_NORM="$C_O_FLAG_NONE" - CXX_O_FLAG_HI="$CXX_O_FLAG_NONE" - CXX_O_FLAG_NORM="$CXX_O_FLAG_NONE" - JAVAC_FLAGS="$JAVAC_FLAGS -g" - ;; -esac - -############################################################################### -# -# Generate the legacy makefile targets for hotspot. -# The hotspot api for selecting the build artifacts, really, needs to be improved. -# -HOTSPOT_TARGET="" - -if test "x$JVM_VARIANT_SERVER" = xtrue; then - HOTSPOT_TARGET="$HOTSPOT_TARGET${HOTSPOT_DEBUG_LEVEL} " -fi - -if test "x$JVM_VARIANT_CLIENT" = xtrue; then - HOTSPOT_TARGET="$HOTSPOT_TARGET${HOTSPOT_DEBUG_LEVEL}1 " -fi - -if test "x$JVM_VARIANT_KERNEL" = xtrue; then - HOTSPOT_TARGET="$HOTSPOT_TARGET${HOTSPOT_DEBUG_LEVEL}kernel " -fi - -if test "x$JVM_VARIANT_ZERO" = xtrue; then - HOTSPOT_TARGET="$HOTSPOT_TARGET${HOTSPOT_DEBUG_LEVEL}zero " -fi - -if test "x$JVM_VARIANT_ZEROSHARK" = xtrue; then - HOTSPOT_TARGET="$HOTSPOT_TARGET${HOTSPOT_DEBUG_LEVEL}shark " -fi - -HOTSPOT_TARGET="$HOTSPOT_TARGET docs export_$HOTSPOT_EXPORT" - -############################################################################### -# -# Setup all directories for the subrepoes and the arguments to the sub makes. -# -LANGTOOLS_OUTPUTDIR="$OUTPUT_ROOT/langtools" -LANGTOOLS_DIST="$OUTPUT_ROOT/langtools/dist" -LANGTOOLS_MAKE_ARGS="" - - - - -CORBA_OUTPUTDIR="$OUTPUT_ROOT/corba" -CORBA_DIST="$OUTPUT_ROOT/corba/dist" -CORBA_MAKE_ARGS="" - - - - -JAXP_OUTPUTDIR="$OUTPUT_ROOT/jaxp" -JAXP_DIST="$OUTPUT_ROOT/jaxp/dist" -JAXP_MAKE_ARGS="" - - - - -JAXWS_OUTPUTDIR="$OUTPUT_ROOT/jaxws" -JAXWS_DIST="$OUTPUT_ROOT/jaxws/dist" -JAXWS_MAKE_ARGS="" - - - - -HOTSPOT_OUTPUTDIR="$OUTPUT_ROOT/hotspot" -HOTSPOT_DIST="$OUTPUT_ROOT/hotspot/dist" -HOTSPOT_MAKE_ARGS="ALT_OUTPUTDIR=$HOTSPOT_OUTPUTDIR ALT_EXPORT_PATH=$HOTSPOT_DIST $HOTSPOT_TARGET" - - - - -JDK_OUTPUTDIR="$OUTPUT_ROOT/jdk" -JDK_MAKE_ARGS="ALT_OUTPUTDIR=\"$OUTPUT_ROOT/jdk\"" - - - -IMAGES_OUTPUTDIR=$OUTPUT_ROOT/images -IMAGES_MAKE_ARGS="ALT_OUTPUTDIR=$OUTPUT_ROOT/jdk \ - SHARE_SRC=$JDK_TOPDIR/src/share \ - PLATFORM_SRC=$JDK_TOPDIR/src/$LEGACY_HOST_OS_API \ - TEMPDIR=$IMAGES_OUTPUTDIR/tmp \ - ABS_TEMPDIR=$IMAGES_OUTPUTDIR/tmp " - - - -############################################################################### -# -# Now setup the CFLAGS and LDFLAGS for the JDK build. -# Later we will also have CFLAGS and LDFLAGS for the hotspot subrepo build. -# -case $COMPILER_NAME in - gcc ) - CCXXFLAGS_JDK="$CCXXFLAGS $CCXXFLAGS_JDK -W -Wall -Wno-unused -Wno-parentheses \ - -pipe -fno-omit-frame-pointer \ - -D_GNU_SOURCE -D_REENTRANT -D_LARGEFILE64_SOURCE" - CFLAGS_JDK="$CFLAGS_JDK -fno-strict-aliasing" - ;; - ossc ) - CFLAGS_JDK="$CFLAGS_JDK -xc99=%none -xCC -errshort=tags -Xa -v -mt -norunpath -xnolib" - CXXFLAGS_JDK="$CXXFLAGS_JDK -errtags=yes +w -mt -features=no%except -DCC_NOEX" - ;; - cl ) - CCXXFLAGS_JDK="$CCXXFLAGS $CCXXFLAGS_JDK -Zi -MD -Zc:wchar_t- -W3 -wd4800 \ - -D_STATIC_CPPLIB -D_DISABLE_DEPRECATE_STATIC_CPPLIB -DWIN32_LEAN_AND_MEAN \ - -D_CRT_SECURE_NO_DEPRECATE -D_CRT_NONSTDC_NO_DEPRECATE \ - -DWIN32 -DIAL" - case $LEGACY_HOST_CPU1 in - i?86 ) - CCXXFLAGS_JDK="$CCXXFLAGS_JDK -D_X86_ -Dx86" - ;; - amd64 ) - CCXXFLAGS_JDK="$CCXXFLAGS_JDK -D_AMD64_ -Damd64" - ;; - esac - ;; -esac - -CCXXFLAGS_JDK="$CCXXFLAGS_JDK $ADD_LP64" - -# The package path is used only on macosx? -PACKAGE_PATH=/opt/local - - -# Sometimes we use a cpu dir (.../lib/amd64/server) -# Sometimes not (.../lib/server) -LIBARCHDIR="$LEGACY_HOST_CPU2/" -if test "x$ENDIAN" = xlittle; then - CCXXFLAGS_JDK="$CCXXFLAGS_JDK -D_LITTLE_ENDIAN" -else - CCXXFLAGS_JDK="$CCXXFLAGS_JDK -D_BIG_ENDIAN" -fi -if test "x$HOST_OS" = xlinux; then - CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DLINUX" -fi -if test "x$HOST_OS" = xwindows; then - CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DWINDOWS" -fi -if test "x$HOST_OS" = xsolaris; then - CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DSOLARIS" -fi -if test "x$HOST_OS" = xmacosx; then - CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DMACOSX -D_ALLBSD_SOURCE" - LIBARCHDIR="" -fi -if test "x$HOST_OS" = xbsd; then - CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DBSD -D_ALLBSD_SOURCE" -fi -if test "x$DEBUG_LEVEL" = xrelease; then - CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DNDEBUG" -else - CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DDEBUG" -fi - -CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DARCH='\"$LEGACY_HOST_CPU1\"' -D$LEGACY_HOST_CPU1" -CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DRELEASE='\"$RELEASE\"'" - -CCXXFLAGS_JDK="$CCXXFLAGS_JDK \ - -I${JDK_OUTPUTDIR}/include \ - -I${JDK_OUTPUTDIR}/include/$PLATFORM \ - -I${JDK_TOPDIR}/src/share/javavm/export \ - -I${JDK_TOPDIR}/src/$LEGACY_HOST_OS_API/javavm/export \ - -I${JDK_TOPDIR}/src/share/native/common \ - -I${JDK_TOPDIR}/src/$LEGACY_HOST_OS_API/native/common" - -# The shared libraries are compiled using the picflag. -CFLAGS_JDKLIB="$CCXXFLAGS_JDK $CFLAGS_JDK $PICFLAG $CFLAGS_JDKLIB_EXTRA" -CXXFLAGS_JDKLIB="$CCXXFLAGS_JDK $CXXFLAGS_JDK $PICFLAG" - -# Executable flags -CFLAGS_JDKEXE="$CCXXFLAGS_JDK $CFLAGS_JDK" -CXXFLAGS_JDKEXE="$CCXXFLAGS_JDK $CXXFLAGS_JDK" - -# Now this is odd. The JDK native libraries have to link against libjvm.so -# On 32-bit machines there is normally two distinct libjvm.so:s, client and server. -# Which should we link to? Are we lucky enough that the binary api to the libjvm.so library -# is identical for client and server? Yes. Which is picked at runtime (client or server)? -# Neither, since the chosen libjvm.so has already been loaded by the launcher, all the following -# libraries will link to whatever is in memory. Yuck. -# -# Thus we offer the compiler to find libjvm.so first in server then in client. It works. Ugh. -if test "x$COMPILER_TYPE" = xCL; then - LDFLAGS_JDKLIB="$LDFLAGS -dll -libpath:${JDK_OUTPUTDIR}/lib -libpath:${JDK_OUTPUTDIR}/objs" - LDFLAGS_JDKLIB_SUFFIX="" - if test "$HOST_CPU_BITS" == "64"; then - LDFLAGS_STACK_SIZE=1048576 - else - LDFLAGS_STACK_SIZE=327680 - fi - LDFLAGS_JDKEXE="$LDFLAGS /STACK:$LDFLAGS_STACK_SIZE" -else - # If this is a --hash-style=gnu system, use --hash-style=both, why? - HAS_GNU_HASH=`$CC -dumpspecs 2>/dev/null | $GREP 'hash-style=gnu'` - if test -n "$HAS_GNU_HASH"; then - # And since we now know that the linker is gnu, then add -z defs, to forbid - # undefined symbols in object files. - LDFLAGS="$LDFLAGS -Xlinker --hash-style=both -Xlinker -z -Xlinker defs" - if test "x$DEBUG_LEVEL" == "xrelease"; then - # When building release libraries, tell the linker optimize them. - # Should this be supplied to the OSS linker as well? - LDFLAGS="$LDFLAGS -Xlinker -O1" - fi - fi - - LDFLAGS_JDKLIB="$LDFLAGS $SHARED_LIBRARY_FLAGS \ - -L${JDK_OUTPUTDIR}/objs \ - -L${JDK_OUTPUTDIR}/lib/${LIBARCHDIR}server \ - -L${JDK_OUTPUTDIR}/lib/${LIBARCHDIR}client \ - -L${JDK_OUTPUTDIR}/lib/${LIBARCHDIR}" - LDFLAGS_JDKLIB_SUFFIX="-ljvm -ljava" - if test "x$COMPILER_NAME" = xossc; then - LDFLAGS_JDKLIB_SUFFIX="$LDFLAGS_JDKLIB_SUFFIX -lc" - fi - - # Only the jli library is explicitly linked when the launchers are built. - # The libjvm is then dynamically loaded/linked by the launcher. - if test "x$HOST_OS" != "xmacosx"; then - LDFLAGS_JDKEXE="$LDFLAGS -L${JDK_OUTPUTDIR}/lib/${LIBARCHDIR}jli" - LDFLAGS_JDKEXE_SUFFIX="-ljli" - fi -fi - - - - - - - - - - - - - - -############################################################################### -# -# statically link libstdc++ before C++ ABI is stablized on Linux unless -# dynamic build is configured on command line. -# -# Check whether --enable-static-link-stdc++ was given. -if test "${enable_static_link_stdc__+set}" = set; then : - enableval=$enable_static_link_stdc__; -else - - enable_static_link_stdc__=yes - -fi - - -if test "x$HOST_OS" = xlinux; then - # Test if -lstdc++ works. - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if dynamic link of stdc++ is possible" >&5 -$as_echo_n "checking if dynamic link of stdc++ is possible... " >&6; } - ac_ext=cpp -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu - - OLD_CXXFLAGS="$CXXFLAGS" - CXXFLAGS="$CXXFLAGS -lstdc++" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ -return 0; - ; - return 0; -} -_ACEOF -if ac_fn_cxx_try_link "$LINENO"; then : - has_dynamic_libstdcxx=yes -else - has_dynamic_libstdcxx=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - CXXFLAGS="$OLD_CXXFLAGS" - ac_ext=cpp -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu - - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $has_dynamic_libstdcxx" >&5 -$as_echo "$has_dynamic_libstdcxx" >&6; } - - # Test if stdc++ can be linked statically. - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if static link of stdc++ is possible" >&5 -$as_echo_n "checking if static link of stdc++ is possible... " >&6; } - STATIC_STDCXX_FLAGS="-Wl,-Bstatic -lstdc++ -lgcc -Wl,-Bdynamic" - ac_ext=cpp -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu - - OLD_LIBS="$LIBS" - OLD_CXX="$CXX" - LIBS="$STATIC_STDCXX_FLAGS" - CXX="$CC" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ -return 0; - ; - return 0; -} -_ACEOF -if ac_fn_cxx_try_link "$LINENO"; then : - has_static_libstdcxx=yes -else - has_static_libstdcxx=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LIBS="$OLD_LIBS" - CXX="$OLD_CXX" - ac_ext=cpp -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu - - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $has_static_libstdcxx" >&5 -$as_echo "$has_static_libstdcxx" >&6; } - - if test "x$has_static_libcxx" = xno && test "x$has_dynamic_libcxx" = xno; then - as_fn_error $? "I cannot link to stdc++! Neither dynamically nor statically." "$LINENO" 5 - fi - - if test "x$enable_static_link_stdc__" = xyes && test "x$has_static_libstdcxx" = xno; then - { $as_echo "$as_me:${as_lineno-$LINENO}: Static linking of libstdc++ was not possible reverting to dynamic linking." >&5 -$as_echo "$as_me: Static linking of libstdc++ was not possible reverting to dynamic linking." >&6;} - enable_static_link_stdc__=no - fi - - if test "x$enable_static_link_stdc__" = xno && test "x$has_dynamic_libstdcxx" = xno; then - { $as_echo "$as_me:${as_lineno-$LINENO}: Dynamic linking of libstdc++ was not possible reverting to static linking." >&5 -$as_echo "$as_me: Dynamic linking of libstdc++ was not possible reverting to static linking." >&6;} - enable_static_link_stdc__=yes - fi - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to link with libstdc++" >&5 -$as_echo_n "checking how to link with libstdc++... " >&6; } - if test "x$enable_static_link_stdc__" = xyes; then - LIBCXX="$LIBCXX $STATIC_STDCXX_FLAGS" - LDCXX="$CC" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: static" >&5 -$as_echo "static" >&6; } - else - LIBCXX="$LIBCXX -lstdc++" - LDCXX="$CXX" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: dynamic" >&5 -$as_echo "dynamic" >&6; } - fi -fi - -############################################################################### -# -# Could someone enlighten this configure script with a comment about libCrun? -# The LEGACY_HOST_CPU3 is the setting for ISA_DIR. -# -if test "x$HOST_OS" = xsolaris && test "x$LIBCXX" = x; then - LIBCXX="/usr/lib${LEGACY_HOST_CPU3}/libCrun.so.1" -fi - -# TODO better (platform agnostic) test -if test "x$HOST_OS" = xmacosx && test "x$LIBCXX" = x && test "x$GCC" = xyes; then - LIBCXX="-lstdc++" -fi - - - -############################################################################### - -OS_VERSION="`uname -r | ${SED} 's!\.! !g' | ${SED} 's!-! !g'`" -OS_VERSION_MAJOR="`${ECHO} ${OS_VERSION} | ${CUT} -f 1 -d ' '`" -OS_VERSION_MINOR="`${ECHO} ${OS_VERSION} | ${CUT} -f 2 -d ' '`" -OS_VERSION_MICRO="`${ECHO} ${OS_VERSION} | ${CUT} -f 3 -d ' '`" - - - - -############################################################################### -# -# Misc -# - -# The name of the Service Agent jar. -SALIB_NAME="${LIBRARY_PREFIX}saproc${SHARED_LIBRARY_SUFFIX}" -if test "x$HOST_OS" = "xwindows"; then - SALIB_NAME="${LIBRARY_PREFIX}sawindbg${SHARED_LIBRARY_SUFFIX}" -fi - - -# Control wether Hotspot runs Queens test after build. -# Check whether --enable-hotspot-test-in-build was given. -if test "${enable_hotspot_test_in_build+set}" = set; then : - enableval=$enable_hotspot_test_in_build; -else - enable_hotspot_test_in_build=no -fi - -if test "x$enable_hotspot_test_in_build" = "xyes"; then - TEST_IN_BUILD=true -else - TEST_IN_BUILD=false -fi - - -############################################################################### -# -# Choose cacerts source file -# - -# Check whether --with-cacerts-file was given. -if test "${with_cacerts_file+set}" = set; then : - withval=$with_cacerts_file; -fi +CONFIGURE_COMMAND_LINE="$@" +conf_script_dir=`dirname $0` +conf_closed_script_dir="$conf_script_dir/../../jdk/make/closed/autoconf" -if test "x$with_cacerts_file" != x; then - CACERTS_FILE=$with_cacerts_file -else - if test "x$OPENJDK" = "xtrue"; then - CACERTS_FILE=${SRC_ROOT}/jdk/src/share/lib/security/cacerts - else - CACERTS_FILE=${SRC_ROOT}/jdk/src/closed/share/lib/security/cacerts.internal - fi -fi +### +### Test that the generated configure is up-to-date +### +# On Solaris /bin/sh doesn't support test -nt but /usr/bin/test does. +TEST=`which test` -# Check if build directory is on local disk. -# return 0 if it is on local disk, non-0 if on remote disk or failure -function is_directory_on_local_disk { - # df -l lists only local disks; if the given directory is not found then - # a non-zero exit code is given - $DF -l $1 > /dev/null 2>&1 +print_error_not_up_to_date() { + echo "Error: The configure source files is newer than the generated files." + echo "Please run 'sh autogen.sh' to update the generated files." } -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if build directory is on local disk" >&5 -$as_echo_n "checking if build directory is on local disk... " >&6; } -if is_directory_on_local_disk $OUTPUT_ROOT; then - OUTPUT_DIR_IS_LOCAL="yes" -else - OUTPUT_DIR_IS_LOCAL="no" -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $OUTPUT_DIR_IS_LOCAL" >&5 -$as_echo "$OUTPUT_DIR_IS_LOCAL" >&6; } - -# We're messing a bit with internal autoconf variables to put the config.status in the -# output directory instead of the current directory. -CONFIG_STATUS=$OUTPUT_ROOT/config.status - -# Now create the actual output files, after this, the main work of configure is done -cat >confcache <<\_ACEOF -# This file is a shell script that caches the results of configure -# tests run on this system so they can be shared between configure -# scripts and configure runs, see configure's option --config-cache. -# It is not useful on other systems. If it contains results you don't -# want to keep, you may remove or edit it. -# -# config.status only pays attention to the cache file if you give it -# the --recheck option to rerun configure. -# -# `ac_cv_env_foo' variables (set or unset) will be overridden when -# loading this file, other *unset* `ac_cv_foo' will be assigned the -# following values. - -_ACEOF - -# The following way of writing the cache mishandles newlines in values, -# but we know of no workaround that is simple, portable, and efficient. -# So, we kill variables containing newlines. -# Ultrix sh set writes to stderr and can't be redirected directly, -# and sets the high bit in the cache file unless we assign to the vars. -( - for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do - eval ac_val=\$$ac_var - case $ac_val in #( - *${as_nl}*) - case $ac_var in #( - *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 -$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; - esac - case $ac_var in #( - _ | IFS | as_nl) ;; #( - BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( - *) { eval $ac_var=; unset $ac_var;} ;; - esac ;; - esac - done - - (set) 2>&1 | - case $as_nl`(ac_space=' '; set) 2>&1` in #( - *${as_nl}ac_space=\ *) - # `set' does not quote correctly, so add quotes: double-quote - # substitution turns \\\\ into \\, and sed turns \\ into \. - sed -n \ - "s/'/'\\\\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" - ;; #( - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" - ;; - esac | - sort -) | - sed ' - /^ac_cv_env_/b end - t clear - :clear - s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ - t end - s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ - :end' >>confcache -if diff "$cache_file" confcache >/dev/null 2>&1; then :; else - if test -w "$cache_file"; then - test "x$cache_file" != "x/dev/null" && - { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 -$as_echo "$as_me: updating cache $cache_file" >&6;} - cat confcache >$cache_file - else - { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 -$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} +for file in configure.ac *.m4 ; do + if $TEST $file -nt generated-configure.sh; then + print_error_not_up_to_date + exit 1 fi -fi -rm -f confcache - -test "x$prefix" = xNONE && prefix=$ac_default_prefix -# Let make expand exec_prefix. -test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' - -DEFS=-DHAVE_CONFIG_H - -ac_libobjs= -ac_ltlibobjs= -U= -for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue - # 1. Remove the extension, and $U if already installed. - ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' - ac_i=`$as_echo "$ac_i" | sed "$ac_script"` - # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR - # will be set to the directory where LIBOBJS objects are built. - as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" - as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' done -LIBOBJS=$ac_libobjs - -LTLIBOBJS=$ac_ltlibobjs - - - -: ${CONFIG_STATUS=./config.status} -ac_write_fail=0 -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files $CONFIG_STATUS" -{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 -$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} -as_write_fail=0 -cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 -#! $SHELL -# Generated by $as_me. -# Run this file to recreate the current configuration. -# Compiler output produced by configure, useful for debugging -# configure, is in config.log if it exists. - -debug=false -ac_cs_recheck=false -ac_cs_silent=false - -SHELL=\${CONFIG_SHELL-$SHELL} -export SHELL -_ASEOF -cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 -## -------------------- ## -## M4sh Initialization. ## -## -------------------- ## - -# Be more Bourne compatible -DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in #( - *posix*) : - set -o posix ;; #( - *) : - ;; -esac -fi - - -as_nl=' -' -export as_nl -# Printing a long string crashes Solaris 7 /usr/bin/printf. -as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo -# Prefer a ksh shell builtin over an external printf program on Solaris, -# but without wasting forks for bash or zsh. -if test -z "$BASH_VERSION$ZSH_VERSION" \ - && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='print -r --' - as_echo_n='print -rn --' -elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='printf %s\n' - as_echo_n='printf %s' -else - if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then - as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' - as_echo_n='/usr/ucb/echo -n' - else - as_echo_body='eval expr "X$1" : "X\\(.*\\)"' - as_echo_n_body='eval - arg=$1; - case $arg in #( - *"$as_nl"*) - expr "X$arg" : "X\\(.*\\)$as_nl"; - arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; - esac; - expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" - ' - export as_echo_n_body - as_echo_n='sh -c $as_echo_n_body as_echo' - fi - export as_echo_body - as_echo='sh -c $as_echo_body as_echo' -fi -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - PATH_SEPARATOR=: - (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { - (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || - PATH_SEPARATOR=';' - } -fi - - -# IFS -# We need space, tab and new line, in precisely that order. Quoting is -# there to prevent editors from complaining about space-tab. -# (If _AS_PATH_WALK were called with IFS unset, it would disable word -# splitting by setting IFS to empty value.) -IFS=" "" $as_nl" - -# Find who we are. Look in the path if we contain no directory separator. -case $0 in #(( - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +if $TEST -e $conf_closed_script_dir/generated-configure.sh; then + # If closed source configure is available, make sure it is up-to-date as well. + for file in configure.ac *.m4 $conf_closed_script_dir/*.m4; do + if $TEST $file -nt $conf_closed_script_dir/generated-configure.sh; then + print_error_not_up_to_date + exit 1 + fi done -IFS=$as_save_IFS - - ;; -esac -# We did not find ourselves, most probably we were run as `sh COMMAND' -# in which case we are not to be found in the path. -if test "x$as_myself" = x; then - as_myself=$0 -fi -if test ! -f "$as_myself"; then - $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - exit 1 -fi - -# Unset variables that we do not need and which cause bugs (e.g. in -# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" -# suppresses any "Segmentation fault" message there. '((' could -# trigger a bug in pdksh 5.2.14. -for as_var in BASH_ENV ENV MAIL MAILPATH -do eval test x\${$as_var+set} = xset \ - && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : -done -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -LC_ALL=C -export LC_ALL -LANGUAGE=C -export LANGUAGE - -# CDPATH. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - - -# as_fn_error STATUS ERROR [LINENO LOG_FD] -# ---------------------------------------- -# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are -# provided, also output the error to LOG_FD, referencing LINENO. Then exit the -# script with STATUS, using 1 if that was 0. -as_fn_error () -{ - as_status=$1; test $as_status -eq 0 && as_status=1 - if test "$4"; then - as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 - fi - $as_echo "$as_me: error: $2" >&2 - as_fn_exit $as_status -} # as_fn_error - - -# as_fn_set_status STATUS -# ----------------------- -# Set $? to STATUS, without forking. -as_fn_set_status () -{ - return $1 -} # as_fn_set_status - -# as_fn_exit STATUS -# ----------------- -# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. -as_fn_exit () -{ - set +e - as_fn_set_status $1 - exit $1 -} # as_fn_exit - -# as_fn_unset VAR -# --------------- -# Portably unset VAR. -as_fn_unset () -{ - { eval $1=; unset $1;} -} -as_unset=as_fn_unset -# as_fn_append VAR VALUE -# ---------------------- -# Append the text in VALUE to the end of the definition contained in VAR. Take -# advantage of any shell optimizations that allow amortized linear growth over -# repeated appends, instead of the typical quadratic growth present in naive -# implementations. -if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : - eval 'as_fn_append () - { - eval $1+=\$2 - }' -else - as_fn_append () - { - eval $1=\$$1\$2 - } -fi # as_fn_append - -# as_fn_arith ARG... -# ------------------ -# Perform arithmetic evaluation on the ARGs, and store the result in the -# global $as_val. Take advantage of shells that can avoid forks. The arguments -# must be portable across $(()) and expr. -if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : - eval 'as_fn_arith () - { - as_val=$(( $* )) - }' -else - as_fn_arith () - { - as_val=`expr "$@" || test $? -eq 1` - } -fi # as_fn_arith - - -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - -if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi - -as_me=`$as_basename -- "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ - s//\1/ - q - } - /^X\/\(\/\/\)$/{ - s//\1/ - q - } - /^X\/\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - -ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in #((((( --n*) - case `echo 'xy\c'` in - *c*) ECHO_T=' ';; # ECHO_T is single tab character. - xy) ECHO_C='\c';; - *) echo `echo ksh88 bug on AIX 6.1` > /dev/null - ECHO_T=' ';; - esac;; -*) - ECHO_N='-n';; -esac - -rm -f conf$$ conf$$.exe conf$$.file -if test -d conf$$.dir; then - rm -f conf$$.dir/conf$$.file -else - rm -f conf$$.dir - mkdir conf$$.dir 2>/dev/null -fi -if (echo >conf$$.file) 2>/dev/null; then - if ln -s conf$$.file conf$$ 2>/dev/null; then - as_ln_s='ln -s' - # ... but there are two gotchas: - # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. - # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -p'. - ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -p' - elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln - else - as_ln_s='cp -p' - fi -else - as_ln_s='cp -p' -fi -rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -rmdir conf$$.dir 2>/dev/null - - -# as_fn_mkdir_p -# ------------- -# Create "$as_dir" as a directory, including parents if necessary. -as_fn_mkdir_p () -{ - - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || eval $as_mkdir_p || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" - -} # as_fn_mkdir_p -if mkdir -p . 2>/dev/null; then - as_mkdir_p='mkdir -p "$as_dir"' -else - test -d ./-p && rmdir ./-p - as_mkdir_p=false -fi - -if test -x / >/dev/null 2>&1; then - as_test_x='test -x' -else - if ls -dL / >/dev/null 2>&1; then - as_ls_L_option=L - else - as_ls_L_option= + # Test if open configure is newer than closed configure, if so, closed needs to + # be regenerated. + conf_open_configure_timestamp=`grep DATE_WHEN_GENERATED: $conf_script_dir/generated-configure.sh | cut -d" " -f 3` + conf_closed_configure_timestamp=`grep DATE_WHEN_GENERATED: $conf_closed_script_dir/generated-configure.sh | cut -d" " -f 3` + if $TEST $conf_open_configure_timestamp -gt $conf_closed_configure_timestamp; then + print_error_not_up_to_date + exit 1 fi - as_test_x=' - eval sh -c '\'' - if test -d "$1"; then - test -d "$1/."; - else - case $1 in #( - -*)set "./$1";; - esac; - case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #(( - ???[sx]*):;;*)false;;esac;fi - '\'' sh - ' -fi -as_executable_p=$as_test_x - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - - -exec 6>&1 -## ----------------------------------- ## -## Main body of $CONFIG_STATUS script. ## -## ----------------------------------- ## -_ASEOF -test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# Save the log message, to keep $0 and so on meaningful, and to -# report actual input values of CONFIG_FILES etc. instead of their -# values after options handling. -ac_log=" -This file was extended by openjdk $as_me version-0.1, which was -generated by GNU Autoconf 2.67. Invocation command line was - - CONFIG_FILES = $CONFIG_FILES - CONFIG_HEADERS = $CONFIG_HEADERS - CONFIG_LINKS = $CONFIG_LINKS - CONFIG_COMMANDS = $CONFIG_COMMANDS - $ $0 $@ - -on `(hostname || uname -n) 2>/dev/null | sed 1q` -" - -_ACEOF - -case $ac_config_files in *" -"*) set x $ac_config_files; shift; ac_config_files=$*;; -esac - -case $ac_config_headers in *" -"*) set x $ac_config_headers; shift; ac_config_headers=$*;; -esac - - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -# Files that config.status was made for. -config_files="$ac_config_files" -config_headers="$ac_config_headers" - -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -ac_cs_usage="\ -\`$as_me' instantiates files and other configuration actions -from templates according to the current configuration. Unless the files -and actions are specified as TAGs, all are instantiated by default. - -Usage: $0 [OPTION]... [TAG]... - - -h, --help print this help, then exit - -V, --version print version number and configuration settings, then exit - --config print configuration, then exit - -q, --quiet, --silent - do not print progress messages - -d, --debug don't remove temporary files - --recheck update $as_me by reconfiguring in the same conditions - --file=FILE[:TEMPLATE] - instantiate the configuration file FILE - --header=FILE[:TEMPLATE] - instantiate the configuration header FILE - -Configuration files: -$config_files - -Configuration headers: -$config_headers - -Report bugs to ." - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" -ac_cs_version="\\ -openjdk config.status version-0.1 -configured by $0, generated by GNU Autoconf 2.67, - with options \\"\$ac_cs_config\\" - -Copyright (C) 2010 Free Software Foundation, Inc. -This config.status script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it." - -ac_pwd='$ac_pwd' -srcdir='$srcdir' -AWK='$AWK' -test -n "\$AWK" || AWK=awk -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# The default lists apply if the user does not specify any file. -ac_need_defaults=: -while test $# != 0 -do - case $1 in - --*=?*) - ac_option=`expr "X$1" : 'X\([^=]*\)='` - ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` - ac_shift=: - ;; - --*=) - ac_option=`expr "X$1" : 'X\([^=]*\)='` - ac_optarg= - ac_shift=: - ;; - *) - ac_option=$1 - ac_optarg=$2 - ac_shift=shift - ;; - esac - - case $ac_option in - # Handling of the options. - -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) - ac_cs_recheck=: ;; - --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) - $as_echo "$ac_cs_version"; exit ;; - --config | --confi | --conf | --con | --co | --c ) - $as_echo "$ac_cs_config"; exit ;; - --debug | --debu | --deb | --de | --d | -d ) - debug=: ;; - --file | --fil | --fi | --f ) - $ac_shift - case $ac_optarg in - *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; - '') as_fn_error $? "missing file argument" ;; - esac - as_fn_append CONFIG_FILES " '$ac_optarg'" - ac_need_defaults=false;; - --header | --heade | --head | --hea ) - $ac_shift - case $ac_optarg in - *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - as_fn_append CONFIG_HEADERS " '$ac_optarg'" - ac_need_defaults=false;; - --he | --h) - # Conflict between --help and --header - as_fn_error $? "ambiguous option: \`$1' -Try \`$0 --help' for more information.";; - --help | --hel | -h ) - $as_echo "$ac_cs_usage"; exit ;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil | --si | --s) - ac_cs_silent=: ;; - - # This is an error. - -*) as_fn_error $? "unrecognized option: \`$1' -Try \`$0 --help' for more information." ;; - - *) as_fn_append ac_config_targets " $1" - ac_need_defaults=false ;; - - esac - shift -done - -ac_configure_extra_args= - -if $ac_cs_silent; then - exec 6>/dev/null - ac_configure_extra_args="$ac_configure_extra_args --silent" -fi - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -if \$ac_cs_recheck; then - set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion - shift - \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 - CONFIG_SHELL='$SHELL' - export CONFIG_SHELL - exec "\$@" + fi -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -exec 5>>config.log -{ - echo - sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX -## Running $as_me. ## -_ASBOX - $as_echo "$ac_log" -} >&5 - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 - -# Handling of arguments. -for ac_config_target in $ac_config_targets -do - case $ac_config_target in - "$OUTPUT_ROOT/config.h") CONFIG_HEADERS="$CONFIG_HEADERS $OUTPUT_ROOT/config.h:$AUTOCONF_DIR/config.h.in" ;; - "$OUTPUT_ROOT/spec.gmk") CONFIG_FILES="$CONFIG_FILES $OUTPUT_ROOT/spec.gmk:$AUTOCONF_DIR/spec.gmk.in" ;; - "$OUTPUT_ROOT/Makefile") CONFIG_FILES="$CONFIG_FILES $OUTPUT_ROOT/Makefile:$AUTOCONF_DIR/Makefile.in" ;; - - *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5 ;; +### +### Process command-line arguments +### +conf_processed_arguments= +conf_openjdk_target= +conf_extra_cflags= +conf_extra_cxxflags= + +for conf_option +do + case $conf_option in + --openjdk-target=*) + conf_openjdk_target=`expr "X$conf_option" : '[^=]*=\(.*\)'` + continue ;; + --with-extra-cflags=*) + conf_extra_cflags=`expr "X$conf_option" : '[^=]*=\(.*\)'` + continue ;; + --with-extra-cxxflags=*) + conf_extra_cxxflags=`expr "X$conf_option" : '[^=]*=\(.*\)'` + continue ;; + *) + conf_processed_arguments="$conf_processed_arguments $conf_option" ;; + esac + + case $conf_option in + -build | --build | --buil | --bui | --bu |-build=* | --build=* | --buil=* | --bui=* | --bu=*) + conf_legacy_crosscompile="$conf_legacy_crosscompile $conf_option" ;; + -target | --target | --targe | --targ | --tar | --ta | --t | -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) + conf_legacy_crosscompile="$conf_legacy_crosscompile $conf_option" ;; + -host | --host | --hos | --ho | -host=* | --host=* | --hos=* | --ho=*) + conf_legacy_crosscompile="$conf_legacy_crosscompile $conf_option" ;; esac done - -# If the user did not use the arguments to specify the items to instantiate, -# then the envvar interface is used. Set only those that are not. -# We use the long form for the default assignment because of an extremely -# bizarre bug on SunOS 4.1.3. -if $ac_need_defaults; then - test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files - test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers -fi - -# Have a temporary directory for convenience. Make it in the build tree -# simply because there is no reason against having it here, and in addition, -# creating and moving files from /tmp can sometimes cause problems. -# Hook for its removal unless debugging. -# Note that there is a small window in which the directory will not be cleaned: -# after its creation but before its name has been assigned to `$tmp'. -$debug || -{ - tmp= - trap 'exit_status=$? - { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status -' 0 - trap 'as_fn_exit 1' 1 2 13 15 -} -# Create a (secure) tmp directory for tmp files. - -{ - tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && - test -n "$tmp" && test -d "$tmp" -} || -{ - tmp=./conf$$-$RANDOM - (umask 077 && mkdir "$tmp") -} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 - -# Set up the scripts for CONFIG_FILES section. -# No need to generate them if there are no CONFIG_FILES. -# This happens for instance with `./config.status config.h'. -if test -n "$CONFIG_FILES"; then - - -ac_cr=`echo X | tr X '\015'` -# On cygwin, bash can eat \r inside `` if the user requested igncr. -# But we know of no other shell where ac_cr would be empty at this -# point, so we can use a bashism as a fallback. -if test "x$ac_cr" = x; then - eval ac_cr=\$\'\\r\' -fi -ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` -if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then - ac_cs_awk_cr='\\r' -else - ac_cs_awk_cr=$ac_cr -fi - -echo 'BEGIN {' >"$tmp/subs1.awk" && -_ACEOF - - -{ - echo "cat >conf$$subs.awk <<_ACEOF" && - echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && - echo "_ACEOF" -} >conf$$subs.sh || - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 -ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` -ac_delim='%!_!# ' -for ac_last_try in false false false false false :; do - . ./conf$$subs.sh || - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 - - ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` - if test $ac_delim_n = $ac_delim_num; then - break - elif $ac_last_try; then - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 +if $TEST "x$conf_legacy_crosscompile" != "x"; then + if $TEST "x$conf_openjdk_target" != "x"; then + echo "Error: Specifying --openjdk-target together with autoconf" + echo "legacy cross-compilation flags is not supported." + echo "You specified: --openjdk-target=$conf_openjdk_target and $conf_legacy_crosscompile." + echo "The recommended use is just --openjdk-target." + exit 1 else - ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + echo "Warning: You are using legacy autoconf cross-compilation flags." + echo "It is recommended that you use --openjdk-target instead." + echo "" fi -done -rm -f conf$$subs.sh - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -cat >>"\$tmp/subs1.awk" <<\\_ACAWK && -_ACEOF -sed -n ' -h -s/^/S["/; s/!.*/"]=/ -p -g -s/^[^!]*!// -:repl -t repl -s/'"$ac_delim"'$// -t delim -:nl -h -s/\(.\{148\}\)..*/\1/ -t more1 -s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ -p -n -b repl -:more1 -s/["\\]/\\&/g; s/^/"/; s/$/"\\/ -p -g -s/.\{148\}// -t nl -:delim -h -s/\(.\{148\}\)..*/\1/ -t more2 -s/["\\]/\\&/g; s/^/"/; s/$/"/ -p -b -:more2 -s/["\\]/\\&/g; s/^/"/; s/$/"\\/ -p -g -s/.\{148\}// -t delim -' >$CONFIG_STATUS || ac_write_fail=1 -rm -f conf$$subs.awk -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -_ACAWK -cat >>"\$tmp/subs1.awk" <<_ACAWK && - for (key in S) S_is_set[key] = 1 - FS = "" - -} -{ - line = $ 0 - nfields = split(line, field, "@") - substed = 0 - len = length(field[1]) - for (i = 2; i < nfields; i++) { - key = field[i] - keylen = length(key) - if (S_is_set[key]) { - value = S[key] - line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) - len += length(value) + length(field[++i]) - substed = 1 - } else - len += 1 + keylen - } - - print line -} - -_ACAWK -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then - sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" -else - cat -fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \ - || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 -_ACEOF - -# VPATH may cause trouble with some makes, so we remove sole $(srcdir), -# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and -# trailing colons and then remove the whole line if VPATH becomes empty -# (actually we leave an empty line to preserve line numbers). -if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ -h -s/// -s/^/:/ -s/[ ]*$/:/ -s/:\$(srcdir):/:/g -s/:\${srcdir}:/:/g -s/:@srcdir@:/:/g -s/^:*// -s/:*$// -x -s/\(=[ ]*\).*/\1/ -G -s/\n// -s/^[^=]*=[ ]*$// -}' fi -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -fi # test -n "$CONFIG_FILES" - -# Set up the scripts for CONFIG_HEADERS section. -# No need to generate them if there are no CONFIG_HEADERS. -# This happens for instance with `./config.status Makefile'. -if test -n "$CONFIG_HEADERS"; then -cat >"$tmp/defines.awk" <<\_ACAWK || -BEGIN { -_ACEOF - -# Transform confdefs.h into an awk script `defines.awk', embedded as -# here-document in config.status, that substitutes the proper values into -# config.h.in to produce config.h. - -# Create a delimiter string that does not exist in confdefs.h, to ease -# handling of long lines. -ac_delim='%!_!# ' -for ac_last_try in false false :; do - ac_t=`sed -n "/$ac_delim/p" confdefs.h` - if test -z "$ac_t"; then - break - elif $ac_last_try; then - as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5 - else - ac_delim="$ac_delim!$ac_delim _$ac_delim!! " - fi -done - -# For the awk script, D is an array of macro values keyed by name, -# likewise P contains macro parameters if any. Preserve backslash -# newline sequences. - -ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* -sed -n ' -s/.\{148\}/&'"$ac_delim"'/g -t rset -:rset -s/^[ ]*#[ ]*define[ ][ ]*/ / -t def -d -:def -s/\\$// -t bsnl -s/["\\]/\\&/g -s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ -D["\1"]=" \3"/p -s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p -d -:bsnl -s/["\\]/\\&/g -s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ -D["\1"]=" \3\\\\\\n"\\/p -t cont -s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p -t cont -d -:cont -n -s/.\{148\}/&'"$ac_delim"'/g -t clear -:clear -s/\\$// -t bsnlc -s/["\\]/\\&/g; s/^/"/; s/$/"/p -d -:bsnlc -s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p -b cont -' >$CONFIG_STATUS || ac_write_fail=1 - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 - for (key in D) D_is_set[key] = 1 - FS = "" -} -/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { - line = \$ 0 - split(line, arg, " ") - if (arg[1] == "#") { - defundef = arg[2] - mac1 = arg[3] - } else { - defundef = substr(arg[1], 2) - mac1 = arg[2] - } - split(mac1, mac2, "(") #) - macro = mac2[1] - prefix = substr(line, 1, index(line, defundef) - 1) - if (D_is_set[macro]) { - # Preserve the white space surrounding the "#". - print prefix "define", macro P[macro] D[macro] - next - } else { - # Replace #undef with comments. This is necessary, for example, - # in the case of _POSIX_SOURCE, which is predefined and required - # on some systems where configure will not decide to define it. - if (defundef == "undef") { - print "/*", prefix defundef, macro, "*/" - next - } - } -} -{ print } -_ACAWK -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 - as_fn_error $? "could not setup config headers machinery" "$LINENO" 5 -fi # test -n "$CONFIG_HEADERS" - - -eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS " -shift -for ac_tag -do - case $ac_tag in - :[FHLC]) ac_mode=$ac_tag; continue;; - esac - case $ac_mode$ac_tag in - :[FHL]*:*);; - :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5 ;; - :[FH]-) ac_tag=-:-;; - :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; - esac - ac_save_IFS=$IFS - IFS=: - set x $ac_tag - IFS=$ac_save_IFS - shift - ac_file=$1 - shift - - case $ac_mode in - :L) ac_source=$1;; - :[FH]) - ac_file_inputs= - for ac_f - do - case $ac_f in - -) ac_f="$tmp/stdin";; - *) # Look for the file first in the build tree, then in the source tree - # (if the path is not absolute). The absolute path cannot be DOS-style, - # because $ac_f cannot contain `:'. - test -f "$ac_f" || - case $ac_f in - [\\/$]*) false;; - *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; - esac || - as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5 ;; - esac - case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac - as_fn_append ac_file_inputs " '$ac_f'" - done - - # Let's still pretend it is `configure' which instantiates (i.e., don't - # use $as_me), people would be surprised to read: - # /* config.h. Generated by config.status. */ - configure_input='Generated from '` - $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' - `' by configure.' - if test x"$ac_file" != x-; then - configure_input="$ac_file. $configure_input" - { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 -$as_echo "$as_me: creating $ac_file" >&6;} - fi - # Neutralize special characters interpreted by sed in replacement strings. - case $configure_input in #( - *\&* | *\|* | *\\* ) - ac_sed_conf_input=`$as_echo "$configure_input" | - sed 's/[\\\\&|]/\\\\&/g'`;; #( - *) ac_sed_conf_input=$configure_input;; - esac - - case $ac_tag in - *:-:* | *:-) cat >"$tmp/stdin" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; - esac - ;; - esac - - ac_dir=`$as_dirname -- "$ac_file" || -$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$ac_file" : 'X\(//\)[^/]' \| \ - X"$ac_file" : 'X\(//\)$' \| \ - X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$ac_file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - as_dir="$ac_dir"; as_fn_mkdir_p - ac_builddir=. - -case "$ac_dir" in -.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -*) - ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` - # A ".." for each directory in $ac_dir_suffix. - ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` - case $ac_top_builddir_sub in - "") ac_top_builddir_sub=. ac_top_build_prefix= ;; - *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; - esac ;; -esac -ac_abs_top_builddir=$ac_pwd -ac_abs_builddir=$ac_pwd$ac_dir_suffix -# for backward compatibility: -ac_top_builddir=$ac_top_build_prefix - -case $srcdir in - .) # We are building in place. - ac_srcdir=. - ac_top_srcdir=$ac_top_builddir_sub - ac_abs_top_srcdir=$ac_pwd ;; - [\\/]* | ?:[\\/]* ) # Absolute name. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir - ac_abs_top_srcdir=$srcdir ;; - *) # Relative name. - ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_build_prefix$srcdir - ac_abs_top_srcdir=$ac_pwd/$srcdir ;; -esac -ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - - - case $ac_mode in - :F) - # - # CONFIG_FILE - # - -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# If the template does not know about datarootdir, expand it. -# FIXME: This hack should be removed a few years after 2.60. -ac_datarootdir_hack=; ac_datarootdir_seen= -ac_sed_dataroot=' -/datarootdir/ { - p - q -} -/@datadir@/p -/@docdir@/p -/@infodir@/p -/@localedir@/p -/@mandir@/p' -case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in -*datarootdir*) ac_datarootdir_seen=yes;; -*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 -$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 - ac_datarootdir_hack=' - s&@datadir@&$datadir&g - s&@docdir@&$docdir&g - s&@infodir@&$infodir&g - s&@localedir@&$localedir&g - s&@mandir@&$mandir&g - s&\\\${datarootdir}&$datarootdir&g' ;; -esac -_ACEOF - -# Neutralize VPATH when `$srcdir' = `.'. -# Shell code in configure.ac might set extrasub. -# FIXME: do we really want to maintain this feature? -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -ac_sed_extra="$ac_vpsub -$extrasub -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -:t -/@[a-zA-Z_][a-zA-Z_0-9]*@/!b -s|@configure_input@|$ac_sed_conf_input|;t t -s&@top_builddir@&$ac_top_builddir_sub&;t t -s&@top_build_prefix@&$ac_top_build_prefix&;t t -s&@srcdir@&$ac_srcdir&;t t -s&@abs_srcdir@&$ac_abs_srcdir&;t t -s&@top_srcdir@&$ac_top_srcdir&;t t -s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t -s&@builddir@&$ac_builddir&;t t -s&@abs_builddir@&$ac_abs_builddir&;t t -s&@abs_top_builddir@&$ac_abs_top_builddir&;t t -$ac_datarootdir_hack -" -eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - -test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && - { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && - { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined" >&5 -$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined" >&2;} - - rm -f "$tmp/stdin" - case $ac_file in - -) cat "$tmp/out" && rm -f "$tmp/out";; - *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";; - esac \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - ;; - :H) - # - # CONFIG_HEADER - # - if test x"$ac_file" != x-; then - { - $as_echo "/* $configure_input */" \ - && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" - } >"$tmp/config.h" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then - { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 -$as_echo "$as_me: $ac_file is unchanged" >&6;} - else - rm -f "$ac_file" - mv "$tmp/config.h" "$ac_file" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - fi - else - $as_echo "/* $configure_input */" \ - && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \ - || as_fn_error $? "could not create -" "$LINENO" 5 - fi - ;; - - - esac - -done # for ac_tag - - -as_fn_exit 0 -_ACEOF -ac_clean_files=$ac_clean_files_save - -test $ac_write_fail = 0 || - as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 - - -# configure is writing to config.log, and then calls config.status. -# config.status does its own redirection, appending to config.log. -# Unfortunately, on DOS this fails, as config.log is still kept open -# by configure, so config.status won't be able to write to it; its -# output is simply discarded. So we exec the FD to /dev/null, -# effectively closing config.log, so it can be properly (re)opened and -# appended to by config.status. When coming back to configure, we -# need to make the FD available again. -if test "$no_create" != yes; then - ac_cs_success=: - ac_config_status_args= - test "$silent" = yes && - ac_config_status_args="$ac_config_status_args --quiet" - exec 5>/dev/null - $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false - exec 5>>config.log - # Use ||, not &&, to avoid exiting from the if with $? = 1, which - # would make configure fail if this is the last instruction. - $ac_cs_success || as_fn_exit 1 -fi -if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 -$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} +if $TEST "x$conf_openjdk_target" != "x"; then + conf_build_platform=`sh $conf_script_dir/build-aux/config.guess` + conf_processed_arguments="--build=$conf_build_platform --host=$conf_openjdk_target --target=$conf_openjdk_target $conf_processed_arguments" fi +# Make configure exit with error on invalid options as default. +# Can be overridden by --disable-option-checking, since we prepend our argument +# and later options override earlier. +conf_processed_arguments="--enable-option-checking=fatal $conf_processed_arguments" -# Finally output some useful information to the user - -if test "x$CCACHE_FOUND" != x; then - if test "x$HAS_GOOD_CCACHE" = x; then - CCACHE_STATUS="installed, but disabled (version older than 3.1.4)" - CCACHE_HELP_MSG="You have ccache installed, but it is a version prior to 3.1.4. Try upgrading." - else - CCACHE_STATUS="installed and in use" - fi -else - if test "x$GCC" = xyes; then - CCACHE_STATUS="not installed (consider installing)" - CCACHE_HELP_MSG="You do not have ccache installed. Try installing it." - else - CCACHE_STATUS="not available for your system" - fi -fi - -printf "\n" -printf "====================================================\n" -printf "A new configuration has been successfully created in\n" -printf "$OUTPUT_ROOT\n" -if test "x$CONFIGURE_COMMAND_LINE" != x; then - printf "using configure arguments '$CONFIGURE_COMMAND_LINE'.\n" +### +### Call the configure script +### +if $TEST -e $conf_closed_script_dir/generated-configure.sh; then + # Closed source configure available; run that instead + . $conf_closed_script_dir/generated-configure.sh $conf_processed_arguments --with-extra-cflags="$conf_extra_cflags" --with-extra-cxxflags="$conf_extra_cxxflags" else - printf "using default settings.\n" -fi - -printf "\n" -printf "Configuration summary:\n" -printf "* Debug level: $DEBUG_LEVEL\n" -printf "* JDK variant: $JDK_VARIANT\n" -printf "* JVM variants: $with_jvm_variants\n" -printf "* Host info: OS: $HOST_OS, CPU architecture: $HOST_CPU_ARCH, address length: $HOST_CPU_BITS\n" -printf "* Boot JDK: $BOOT_JDK\n" - -printf "\n" -printf "Build performance summary:\n" -printf "* Cores to use: $NUM_CORES\n" -printf "* Memory limit: $MEMORY_SIZE MB\n" -printf "* ccache status: $CCACHE_STATUS\n" - -if test "x$OUTPUT_DIR_IS_LOCAL" != "xyes"; then - printf "\n" - printf "WARNING: Your build output directory is not on a local disk.\n" - printf "This will severely degrade build performance!\n" - printf "It is recommended that you create an output directory on a local disk,\n" - printf "and run the configure script again from that directory.\n" + . $conf_script_dir/generated-configure.sh $conf_processed_arguments --with-extra-cflags="$conf_extra_cflags" --with-extra-cxxflags="$conf_extra_cxxflags" fi -if test "x$CCACHE_HELP_MSG" != x; then - printf "\n" - printf "Build performance tip: ccache gives a tremendous speedup for C++ recompilations.\n" - printf "$CCACHE_HELP_MSG\n" +### +### Post-processing +### - help_on_build_dependency ccache - printf "$HELP_MSG\n" +# Move the log file to the output root, if this was successfully created +if $TEST -d "$OUTPUT_ROOT"; then + mv -f config.log "$OUTPUT_ROOT" 2> /dev/null fi --- old/common/autoconf/configure.ac 2012-07-03 20:04:03.837844207 +0200 +++ new/common/autoconf/configure.ac 2012-07-03 20:04:03.737842737 +0200 @@ -23,2856 +23,204 @@ # questions. # +############################################################################### +# +# Includes and boilerplate +# +############################################################################### + + AC_PREREQ([2.61]) -AC_INIT(openjdk, version-0.1, build-infra-dev@openjdk.java.net) +AC_INIT(openjdk, jdk8, build-dev@openjdk.java.net) -AC_CONFIG_AUX_DIR([build-aux]) +# Do not change or remove the following line, it is needed for consistency checks: +# DATE_WHEN_GENERATED: @DATE_WHEN_GENERATED@ +AC_CONFIG_AUX_DIR([build-aux]) m4_include([build-aux/pkg.m4]) + +# Include these first... +m4_include([basics.m4]) m4_include([builddeps.m4]) -m4_include([platform.m4]) -m4_include([cores.m4]) +# ... then the rest +m4_include([boot-jdk.m4]) +m4_include([build-performance.m4]) m4_include([help.m4]) +m4_include([jdk-options.m4]) +m4_include([libraries.m4]) +m4_include([platform.m4]) +m4_include([source-dirs.m4]) +m4_include([toolchain.m4]) + +# This line needs to be here, verbatim, after all includes. +# It is replaced with closed functionality when building +# closed sources. +AC_DEFUN_ONCE([CLOSED_HOOK]) + +############################################################################### +# +# Initialization +# +############################################################################### + +# Basic initialization that must happen first of all +BASIC_INIT +BASIC_SETUP_PATHS +BASIC_SETUP_LOGGING -# Save the command line. Do this very early, before it is lost by calling autoconf macros. -CONFIGURE_COMMAND_LINE="$@" -AC_SUBST(CONFIGURE_COMMAND_LINE) - -# Locate the directory of this script. -SCRIPT="[$]0" -REMOVE_SYMBOLIC_LINKS(SCRIPT) -AUTOCONF_DIR=`dirname [$]0` - -# Start with tools that do not need have cross compilation support -# and can be expected to be found in the default PATH. These tools are -# used by configure. Nor are these tools expected to be found in the -# devkit from the builddeps server either, since they are -# needed to download the devkit. -AC_PROG_AWK -CHECK_NONEMPTY(AWK) -AC_PATH_PROG(CAT, cat) -CHECK_NONEMPTY(CAT) -AC_PATH_PROG(CHMOD, chmod) -CHECK_NONEMPTY(CHMOD) -AC_PATH_PROG(CP, cp) -CHECK_NONEMPTY(CP) -AC_PATH_PROG(CPIO, cpio) -CHECK_NONEMPTY(CPIO) -AC_PATH_PROG(CUT, cut) -CHECK_NONEMPTY(CUT) -AC_PATH_PROG(DATE, date) -CHECK_NONEMPTY(DATE) -AC_PATH_PROG(DF, df) -CHECK_NONEMPTY(DF) -AC_PATH_PROG(DIFF, diff) -CHECK_NONEMPTY(DIFF) -# Warning echo is really, really unportable!!!!! Different -# behaviour in bash and dash and in a lot of other shells! -# Use printf for serious work! -AC_PATH_PROG(ECHO, echo) -CHECK_NONEMPTY(ECHO) -AC_PROG_EGREP -CHECK_NONEMPTY(EGREP) -AC_PROG_FGREP -CHECK_NONEMPTY(FGREP) - -AC_PATH_PROG(FIND, find) -CHECK_NONEMPTY(FIND) -CHECK_FIND_DELETE -AC_SUBST(FIND_DELETE) - -AC_PROG_GREP -CHECK_NONEMPTY(GREP) -AC_PATH_PROG(HEAD, head) -CHECK_NONEMPTY(HEAD) -AC_PATH_PROG(LN, ln) -CHECK_NONEMPTY(LN) -AC_PATH_PROG(LS, ls) -CHECK_NONEMPTY(LS) -AC_PATH_PROGS(MAKE, [gmake make]) -CHECK_NONEMPTY(MAKE) -MAKE_VERSION=`$MAKE --version | head -n 1 | grep '3.8[[12346789]]'` -if test "x$MAKE_VERSION" = x; then - AC_MSG_ERROR([You must use GNU make 3.81 or newer! Please put it in the path.]) -fi -AC_PATH_PROG(MKDIR, mkdir) -CHECK_NONEMPTY(MKDIR) -AC_PATH_PROG(MV, mv) -CHECK_NONEMPTY(MV) -AC_PATH_PROGS(NAWK, [nawk gawk awk]) -CHECK_NONEMPTY(NAWK) -AC_PATH_PROG(PRINTF, printf) -CHECK_NONEMPTY(PRINTF) -AC_PATH_PROG(THEPWDCMD, pwd) -AC_PATH_PROG(RM, rm) -CHECK_NONEMPTY(RM) -RM="$RM -f" -AC_PROG_SED -CHECK_NONEMPTY(SED) -AC_PATH_PROG(SH, sh) -CHECK_NONEMPTY(SH) -AC_PATH_PROG(SORT, sort) -CHECK_NONEMPTY(SORT) -AC_PATH_PROG(TAR, tar) -CHECK_NONEMPTY(TAR) -AC_PATH_PROG(TAIL, tail) -CHECK_NONEMPTY(TAIL) -AC_PATH_PROG(TEE, tee) -CHECK_NONEMPTY(TEE) -AC_PATH_PROG(TR, tr) -CHECK_NONEMPTY(TR) -AC_PATH_PROG(TOUCH, touch) -CHECK_NONEMPTY(TOUCH) -AC_PATH_PROG(WC, wc) -CHECK_NONEMPTY(WC) -AC_PATH_PROG(XARGS, xargs) -CHECK_NONEMPTY(XARGS) -AC_PATH_PROG(ZIP, zip) -CHECK_NONEMPTY(ZIP) -AC_PATH_PROG(UNZIP, unzip) -CHECK_NONEMPTY(UNZIP) -AC_PATH_PROG(LDD, ldd) -if test "x$LDD" = "x"; then - # List shared lib dependencies is used for - # debug output and checking for forbidden dependencies. - # We can build without it. - LDD="true" -fi -AC_PATH_PROG(OTOOL, otool) -if test "x$OTOOL" = "x"; then - OTOOL="true" -fi -AC_PATH_PROG(READELF, readelf) -AC_PATH_PROG(EXPR, expr) -CHECK_NONEMPTY(EXPR) -AC_PATH_PROG(FILE, file) -CHECK_NONEMPTY(FILE) -AC_PATH_PROG(HG, hg) - -# Figure out the build and host system. -AC_CANONICAL_BUILD -AC_CANONICAL_HOST - -AC_ARG_WITH(data-model, [AS_HELP_STRING([--with-data-model], - [build 32-bit or 64-bit binaries (for platforms that support it), e.g. --with-data-model=32 @<:@guessed@:>@])]) - -if test "x$with_data_model" != x && \ - test "x$with_data_model" != x32 && \ - test "x$with_data_model" != x64 ; then - AC_MSG_ERROR([The data model can only be 32 or 64!]) -fi -# Translate the standard cpu-vendor-kernel-os quadruplets into -# the new HOST_.... and BUILD_... and the legacy names used by -# the openjdk build. -# It uses $host_os $host_cpu $build_os $build_cpu and $with_data_model -EXTRACT_HOST_AND_BUILD_AND_LEGACY_VARS -# Now the following vars are defined. -# HOST_OS=aix,bsd,hpux,linux,macosx,solaris,windows -# HOST_OS_FAMILY=bsd,gnu,sysv,win32,wince -# HOST_OS_API=posix,winapi -# -# HOST_CPU=ia32,x64,sparc,sparcv9,arm,arm64,ppc,ppc64 -# HOST_CPU_ARCH=x86,sparc,pcc,arm -# HOST_CPU_BITS=32,64 -# HOST_CPU_ENDIAN=big,little -# -# There is also a: -# LEGACY_HOST_CPU1=i586,amd64,.... # used to set the old var ARCH -# LEGACY_HOST_CPU2=i386,amd64,.... # used to set the old var LIBARCH -# LEGACY_HOST_CPU3=only sparcv9,amd64 # used to set the ISA_DIR on Solaris -# There was also a BUILDARCH that had i486,amd64,... but we do not use that -# in the new build. -# LEGACY_HOST_OS_API=solaris,windows # used to select source roots - -DATE_WHEN_CONFIGURED=`LANG=C date` -AC_SUBST(DATE_WHEN_CONFIGURED) - -# How many cores do we have on this build system? -AC_ARG_WITH(num-cores, [AS_HELP_STRING([--with-num-cores], - [number of cores in the build system, e.g. --with-num-cores=8 @<:@probed@:>@])]) -if test "x$with_num_cores" = x; then - # The number of cores were not specified, try to probe them. - CHECK_CORES -else - NUM_CORES=$with_num_cores - CONCURRENT_BUILD_JOBS=`expr $NUM_CORES \* 2` -fi -AC_SUBST(NUM_CORES) -AC_SUBST(CONCURRENT_BUILD_JOBS) - -# How many cores do we have on this build system? -AC_ARG_WITH(memory-size, [AS_HELP_STRING([--with-memory-size], - [memory (in MB) available in the build system, e.g. --with-memory-size=1024 @<:@probed@:>@])]) -if test "x$with_memory_size" = x; then - # The memory size was not specified, try to probe it. - CHECK_MEMORY_SIZE -else - MEMORY_SIZE=$with_memory_size -fi -AC_SUBST(MEMORY_SIZE) - -# Where is the source? It is located two levels above the configure script. -CURDIR="$PWD" -cd "$AUTOCONF_DIR/../.." -SRC_ROOT="`pwd`" -AC_SUBST(SRC_ROOT) -cd "$CURDIR" - -# For cygwin we need cygpath first, since it is used everywhere. -AC_PATH_PROG(CYGPATH, cygpath) -PATH_SEP=":" -if test "x$BUILD_OS" = "xwindows"; then - if test "x$CYGPATH" = x; then - AC_MSG_ERROR([Something is wrong with your cygwin installation since I cannot find cygpath.exe in your path]) - fi - PATH_SEP=";" -fi -AC_SUBST(PATH_SEP) - -SPACESAFE(SRC_ROOT,[the path to the source root]) -SPACESAFE(CURDIR,[the path to the current directory]) - -if test "x$BUILD_OS" = "xsolaris"; then - # Also search in /usr/ccs/bin for utilities like ar and as. - PATH="/usr/ccs/bin:$PATH" -fi - -############################################################################### -# -# OpenJDK or closed -# -AC_ARG_ENABLE([openjdk-only], [AS_HELP_STRING([--enable-openjdk-only], - [build OpenJDK regardless of the presence of closed repositories @<:@disabled@:>@])],,) - -if test "x$enable_openjdk_only" = "xyes"; then - OPENJDK=true -elif test "x$enable_openjdk_only" = "xno"; then - OPENJDK=false -elif test -d "$SRC_ROOT/jdk/src/closed"; then - OPENJDK=false -else - OPENJDK=true -fi - -if test "x$OPENJDK" = "xtrue"; then - SET_OPENJDK=OPENJDK=true -fi - -AC_SUBST(SET_OPENJDK) - -############################################################################### -# -# JIGSAW or not. The JIGSAW variable is used during the intermediate -# stage when we are building both the old style JDK and the new style modularized JDK. -# When the modularized JDK is finalized, this option will go away. -# -AC_ARG_ENABLE([jigsaw], [AS_HELP_STRING([--enable-jigsaw], - [build Jigsaw images (not yet available) @<:@disabled@:>@])],,) - -if test "x$enable_jigsaw" = "xyes"; then - JIGSAW=true -else - JIGSAW=false -fi -AC_SUBST(JIGSAW) - -############################################################################### -# -# Check which variant of the JDK that we want to build. -# Currently we have: -# normal: standard edition -# embedded: cut down to a smaller footprint -# -# Effectively the JDK variant gives a name to a specific set of -# modules to compile into the JDK. In the future, these modules -# might even be Jigsaw modules. -# -AC_MSG_CHECKING([which variant of the JDK to build]) -AC_ARG_WITH([jdk-variant], [AS_HELP_STRING([--with-jdk-variant], - [JDK variant to build (normal, embedded) @<:@normal@:>@])]) - -if test "x$with_jdk_variant" = xnormal || test "x$with_jdk_variant" = x; then - JAVASE_EMBEDDED="" - MINIMIZE_RAM_USAGE="" - JDK_VARIANT="normal" -elif test "x$with_jdk_variant" = xembedded; then - JAVASE_EMBEDDED="JAVASE_EMBEDDED:=true" - MINIMIZE_RAM_USAGE="MINIMIZE_RAM_USAGE:=true" - JDK_VARIANT="embedded" -else - AC_MSG_ERROR([The available JDK variants are: normal, embedded]) -fi - -AC_SUBST(JAVASE_EMBEDDED) -AC_SUBST(MINIMIZE_RAM_USAGE) -AC_SUBST(JDK_VARIANT) - -AC_MSG_RESULT([$JDK_VARIANT]) - -############################################################################### -# -# Should we build a JDK/JVM with head support (ie a graphical ui)? -# We always build headless support. -# -AC_MSG_CHECKING([headful support]) -AC_ARG_ENABLE([headful], [AS_HELP_STRING([--disable-headful], - [build headful support (graphical UI support) @<:@enabled@:>@])], - [SUPPORT_HEADFUL=${enable_headful}], [SUPPORT_HEADFUL=yes]) - -SUPPORT_HEADLESS=yes -BUILD_HEADLESS="BUILD_HEADLESS:=true" - -if test "x$SUPPORT_HEADFUL" = xyes; then - # We are building both headful and headless. - BUILD_HEADLESS_ONLY="" - headful_msg="inlude support for both headful and headless" -fi - -if test "x$SUPPORT_HEADFUL" = xno; then - # Thus we are building headless only. - BUILD_HEADLESS="BUILD_HEADLESS:=true" - BUILD_HEADLESS_ONLY="BUILD_HEADLESS_ONLY:=true" - headful_msg="headless only" -fi - -AC_MSG_RESULT([$headful_msg]) - -AC_SUBST(SUPPORT_HEADLESS) -AC_SUBST(SUPPORT_HEADFUL) -AC_SUBST(BUILD_HEADLESS) -AC_SUBST(BUILD_HEADLESS_ONLY) - -############################################################################### -# -# Check which variants of the JVM that we want to build. -# Currently we have: -# server: normal interpreter and a tiered C1/C2 compiler -# client: normal interpreter and C1 (no C2 compiler) (only 32-bit platforms) -# kernel: kernel footprint JVM that passes the TCK without major performance problems, -# ie normal interpreter and C1, only the serial GC, kernel jvmti etc -# zero: no machine code interpreter, no compiler -# zeroshark: zero interpreter and shark/llvm compiler backend -AC_MSG_CHECKING([which variants of the JVM that should be built]) -AC_ARG_WITH([jvm-variants], [AS_HELP_STRING([--with-jvm-variants], - [JVM variants (separated by commas) to build (server, client, kernel, zero, zeroshark) @<:@server@:>@])]) - -if test "x$with_jvm_variants" = x; then - if test "x$JDK_VARIANT" = xembedded; then - with_jvm_variants="kernel" - elif test "x$HOST_CPU_BITS" = x64; then - with_jvm_variants="server" - else - # Yes, on 32-bit machines, the same source (almost) is compiled twice - # to generate two libjvm.so files. Fun, fun. - with_jvm_variants="client,server" - fi -fi - -JVM_VARIANTS=",$with_jvm_variants," -TEST_VARIANTS=`$ECHO "$JVM_VARIANTS" | $SED -e 's/server,//' -e 's/client,//' -e 's/kernel,//' -e 's/zero,//' -e 's/zeroshark,//'` - -if test "x$TEST_VARIANTS" != "x,"; then - AC_MSG_ERROR([The available JVM variants are: server, client, kernel, zero, zeroshark]) -fi -AC_MSG_RESULT([$with_jvm_variants]) - -JVM_VARIANT_SERVER=`$ECHO "$JVM_VARIANTS" | $SED -e '/,server,/!s/.*/false/g' -e '/,server,/s/.*/true/g'` -JVM_VARIANT_CLIENT=`$ECHO "$JVM_VARIANTS" | $SED -e '/,client,/!s/.*/false/g' -e '/,client,/s/.*/true/g'` -JVM_VARIANT_KERNEL=`$ECHO "$JVM_VARIANTS" | $SED -e '/,kernel,/!s/.*/false/g' -e '/,kernel,/s/.*/true/g'` -JVM_VARIANT_ZERO=`$ECHO "$JVM_VARIANTS" | $SED -e '/,zero,/!s/.*/false/g' -e '/,zero,/s/.*/true/g'` -JVM_VARIANT_ZEROSHARK=`$ECHO "$JVM_VARIANTS" | $SED -e '/,zeroshark,/!s/.*/false/g' -e '/,zeroshark,/s/.*/true/g'` - -if test "x$JVM_VARIANT_CLIENT" = xtrue; then - if test "x$HOST_CPU_BITS" = x64; then - AC_MSG_ERROR([You cannot build a client JVM for a 64-bit machine.]) - fi -fi -if test "x$JVM_VARIANT_KERNEL" = xtrue; then - if test "x$HOST_CPU_BITS" = x64; then - AC_MSG_ERROR([You cannot build a kernel JVM for a 64-bit machine.]) - fi -fi - -COUNT_VARIANTS=`$ECHO "$JVM_VARIANTS" | $SED -e 's/server,/1/' -e 's/client,/1/' -e 's/kernel,/1/' -e 's/zero,/1/' -e 's/zeroshark,/1/'` -# Replace the commas with AND for use in the build directory name. -ANDED_JVM_VARIANTS=`$ECHO "$JVM_VARIANTS" | $SED -e 's/^,//' -e 's/,$//' -e 's/,/AND/'` -if test "x$COUNT_VARIANTS" != "x,1"; then - AC_MSG_NOTICE([NOTE! Longer build time since we are building more than one version of the libjvm! $with_jvm_variants]) -fi - -AC_SUBST(JVM_VARIANTS) -AC_SUBST(JVM_VARIANT_SERVER) -AC_SUBST(JVM_VARIANT_CLIENT) -AC_SUBST(JVM_VARIANT_KERNEL) -AC_SUBST(JVM_VARIANT_ZERO) -AC_SUBST(JVM_VARIANT_ZEROSHARK) - -############################################################################### -# -# Set the debug level -# release: no debug information, all optimizations, no asserts. -# fastdebug: debug information (-g), all optimizations, all asserts -# slowdebug: debug information (-g), no optimizations, all asserts -# -DEBUG_LEVEL="release" -AC_MSG_CHECKING([which debug level to use]) -AC_ARG_ENABLE([debug], [AS_HELP_STRING([--enable-debug], - [set the debug level to fastdebug (shorthand for --with-debug-level=fastdebug) @<:@disabled@:>@])], - [ - ENABLE_DEBUG="${enableval}" - DEBUG_LEVEL="fastdebug" - ], [ENABLE_DEBUG="no"]) - -AC_ARG_WITH([debug-level], [AS_HELP_STRING([--with-debug-level], - [set the debug level (release, fastdebug, slowdebug) @<:@release@:>@])], - [ - DEBUG_LEVEL="${withval}" - if test "x$ENABLE_DEBUG" = xyes; then - AC_MSG_ERROR([You cannot use both --enable-debug and --with-debug-level at the same time.]) - fi - ]) -AC_MSG_RESULT([$DEBUG_LEVEL]) - -if test "x$DEBUG_LEVEL" != xrelease && \ - test "x$DEBUG_LEVEL" != xfastdebug && \ - test "x$DEBUG_LEVEL" != xslowdebug; then - AC_MSG_ERROR([Allowed debug levels are: release, fastdebug and slowdebug]) -fi - -case $DEBUG_LEVEL in - release ) - VARIANT="OPT" - FASTDEBUG="false" - DEBUG_CLASSFILES="false" - BUILD_VARIANT_RELEASE="" - ;; - fastdebug ) - VARIANT="DBG" - FASTDEBUG="true" - DEBUG_CLASSFILES="true" - BUILD_VARIANT_RELEASE="-fastdebug" - ;; - slowdebug ) - VARIANT="DBG" - FASTDEBUG="false" - DEBUG_CLASSFILES="true" - BUILD_VARIANT_RELEASE="-debug" - ;; -esac - -AC_SUBST(DEBUG_LEVEL) -AC_SUBST(VARIANT) -AC_SUBST(FASTDEBUG) -AC_SUBST(DEBUG_CLASSFILES) -AC_SUBST(BUILD_VARIANT_RELEASE) - -# Source the version numbers -. $AUTOCONF_DIR/version.numbers -if test "x$OPENJDK" = "xfalse"; then - . $AUTOCONF_DIR/closed.version.numbers -fi -# Now set the JDK version, milestone, build number etc. -AC_SUBST(JDK_MAJOR_VERSION) -AC_SUBST(JDK_MINOR_VERSION) -AC_SUBST(JDK_MICRO_VERSION) -AC_SUBST(JDK_UPDATE_VERSION) -AC_SUBST(JDK_BUILD_NUMBER) -AC_SUBST(MILESTONE) -AC_SUBST(LAUNCHER_NAME) -AC_SUBST(PRODUCT_NAME) -AC_SUBST(PRODUCT_SUFFIX) -AC_SUBST(JDK_RC_PLATFORM_NAME) -AC_SUBST(COMPANY_NAME) - -COPYRIGHT_YEAR=`date +'%Y'` -AC_SUBST(COPYRIGHT_YEAR) - -RUNTIME_NAME="$PRODUCT_NAME $PRODUCT_SUFFIX" -AC_SUBST(RUNTIME_NAME) - -if test "x$JDK_UPDATE_VERSION" != x; then - JDK_VERSION="${JDK_MAJOR_VERSION}.${JDK_MINOR_VERSION}.${JDK_MICRO_VERSION}_${JDK_UPDATE_VERSION}" -else - JDK_VERSION="${JDK_MAJOR_VERSION}.${JDK_MINOR_VERSION}.${JDK_MICRO_VERSION}" -fi -AC_SUBST(JDK_VERSION) - -if test "x$MILESTONE" != x; then - RELEASE="${JDK_VERSION}-${MILESTONE}${BUILD_VARIANT_RELEASE}" -else - RELEASE="${JDK_VERSION}${BUILD_VARIANT_RELEASE}" -fi -AC_SUBST(RELEASE) - -if test "x$JDK_BUILD_NUMBER" != x; then - FULL_VERSION="${RELEASE}-${JDK_BUILD_NUMBER}" -else - JDK_BUILD_NUMBER=b00 - BUILD_DATE=`date '+%Y_%m_%d_%H_%M'` - # Avoid [:alnum:] since it depends on the locale. - CLEAN_USERNAME=`echo "$USER" | $TR -d -c 'abcdefghijklmnopqrstuvqxyz0123456789'` - USER_RELEASE_SUFFIX=`echo "${CLEAN_USERNAME}_${BUILD_DATE}" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvqxyz'` - FULL_VERSION="${RELEASE}-${USER_RELEASE_SUFFIX}-${JDK_BUILD_NUMBER}" -fi -AC_SUBST(FULL_VERSION) -COOKED_BUILD_NUMBER=`$ECHO $JDK_BUILD_NUMBER | $SED -e 's/^b//' -e 's/^0//'` -AC_SUBST(COOKED_BUILD_NUMBER) - -# Test from where we are running configure, in or outside of src root. -if test "x$CURDIR" = "x$SRC_ROOT" || test "x$CURDIR" = "x$SRC_ROOT/common" || test "x$CURDIR" = "x$SRC_ROOT/common/autoconf" || test "x$CURDIR" = "x$SRC_ROOT/common/makefiles" ; then - # We are running configure from the src root. - # Create a default ./build/host-variant-debuglevel output root. - CONF_NAME="${HOST_OS}-${HOST_CPU}-${JDK_VARIANT}-${ANDED_JVM_VARIANTS}-${DEBUG_LEVEL}" - OUTPUT_ROOT="$SRC_ROOT/build/${CONF_NAME}" - mkdir -p "$OUTPUT_ROOT" - if test ! -d "$OUTPUT_ROOT"; then - AC_MSG_ERROR([Could not create build directory $OUTPUT_ROOT]) - fi -else - # We are running configure from outside of the src dir. - # Then use the current directory as output dir! - # If configuration is situated in normal build directory, just use the build - # directory name as configuration name, otherwise use the complete path. - CONF_NAME=`$ECHO $CURDIR | $SED -e "s!^${SRC_ROOT}/build/!!"` - OUTPUT_ROOT="$CURDIR" -fi - -SPACESAFE(OUTPUT_ROOT,[the path to the output root]) - -# Save the arguments given to us -echo "$CONFIGURE_COMMAND_LINE" > $OUTPUT_ROOT/configure-arguments - -# Check if the VS env variables were setup prior to running configure. -# If not, then find vcvarsall.bat and run it automatically, and integrate -# the set env variables into the spec file. -SETUPDEVENV="# No special vars" -if test "x$BUILD_OS" = "xwindows"; then - # If vcvarsall.bat has been run, then VCINSTALLDIR is set. - if test "x$VCINSTALLDIR" != x; then - # No further setup is needed. The build will happen from this kind - # of shell. - SETUPDEVENV="# This spec file expects that you are running bash from within a VS command prompt." - # Make sure to remind you, if you forget to run make from a cygwin bash shell - # that is spawned "bash -l" from a VS command prompt. - CHECK_FOR_VCINSTALLDIR=yes - AC_MSG_CHECKING([if you are running from within a VS command prompt]) - AC_MSG_RESULT([yes]) - else - # Ah, we have not yet run vcvarsall.bat/vsvars32.bat/vsvars64.bat. Lets do that. First find it. - if test "x$VS100COMNTOOLS" != x; then - VARSBAT=`find "$VS100COMNTOOLS/../.." -name vcvarsall.bat` - SEARCH_ROOT="$VS100COMNTOOLS" - else - VARSBAT=`find "$PROGRAMFILES" -name vcvarsall.bat` - SEARCH_ROOT="$PROGRAMFILES" - fi - VCPATH=`dirname "$VARSBAT"` - VCPATH=`cygpath -w "$VCPATH"` - if test "x$VARSBAT" = x || test ! -d "$VCPATH"; then - AC_MSG_CHECKING([if we can find the VS installation]) - AC_MSG_RESULT([no]) - AC_MSG_ERROR([Tried to find a VS installation using both $SEARCH_ROOT but failed. Please run "c:\\cygwin\\bin\\bash.exe -l" from a VS command prompt and then run configure/make from there.]) - fi - case "$LEGACY_HOST_CPU1" in - i?86) - VARSBAT_ARCH=x86 - ;; - *) - VARSBAT_ARCH=$LEGACY_HOST_CPU1 - ;; - esac - # Lets extract the variables that are set by vcvarsall.bat/vsvars32.bat/vsvars64.bat - cd $OUTPUT_ROOT - bash $SRC_ROOT/common/bin/extractvcvars.sh "$VARSBAT" "$VARSBAT_ARCH" - cd $CURDIR - if test ! -s $OUTPUT_ROOT/localdevenv.sh || test ! -s $OUTPUT_ROOT/localdevenv.gmk; then - AC_MSG_CHECKING([if we can extract the needed env variables]) - AC_MSG_RESULT([no]) - AC_MSG_ERROR([Could not succesfully extract the env variables needed for the VS setup. Please run "c:\\cygwin\\bin\\bash.exe -l" from a VS command prompt and then run configure/make from there.]) - fi - # Now set all paths and other env variables. This will allow the rest of - # the configure script to find and run the compiler in the proper way. - . $OUTPUT_ROOT/localdevenv.sh - AC_MSG_CHECKING([if we can find the VS installation]) - if test "x$VCINSTALLDIR" != x; then - AC_MSG_RESULT([$VCINSTALLDIR]) - else - AC_MSG_RESULT([no]) - AC_MSG_ERROR([Could not find VS installation. Please install. If you are sure you have installed VS, then please run "c:\\cygwin\\bin\\bash.exe -l" from a VS command prompt and then run configure/make from there.]) - fi - CHECK_FOR_VCINSTALLDIR=no - SETUPDEVENV="include $OUTPUT_ROOT/localdevenv.gmk" - - AC_MSG_CHECKING([for msvcr100.dll]) - AC_ARG_WITH(msvcr100dll, [AS_HELP_STRING([--with-msvcr100dll], - [copy this msvcr100.dll into the built JDK])]) - if test "x$with_msvcr100dll" != x; then - MSVCR100DLL="$with_msvcr100dll" - else - if test "x$HOST_CPU_BITS" = x64; then - MSVCR100DLL=`find "$VCINSTALLDIR/.." -name msvcr100.dll | grep x64 | head --lines 1` - else - MSVCR100DLL=`find "$VCINSTALLDIR/.." -name msvcr100.dll | grep x86 | grep -v ia64 | grep -v x64 | head --lines 1` - if test "x$MSVCR100DLL" = x; then - MSVCR100DLL=`find "$VCINSTALLDIR/.." -name msvcr100.dll | head --lines 1` - fi - fi - fi - if test "x$MSVCR100DLL" = x; then - AC_MSG_RESULT([no]) - AC_MSG_ERROR([Could not find msvcr100.dll !]) - fi - AC_MSG_RESULT([$MSVCR100DLL]) - SPACESAFE(MSVCR100DLL,[the path to msvcr100.dll]) - fi -fi -AC_SUBST(SETUPDEVENV) -AC_SUBST(CHECK_FOR_VCINSTALLDIR) -AC_SUBST(MSVCR100DLL) - -# Most of the probed defines are put into config.h -AC_CONFIG_HEADERS([$OUTPUT_ROOT/config.h:$AUTOCONF_DIR/config.h.in]) -# The spec.gmk file contains all variables for the make system. -AC_CONFIG_FILES([$OUTPUT_ROOT/spec.gmk:$AUTOCONF_DIR/spec.gmk.in]) -# The generated Makefile knows where the spec.gmk is and where the source is. -# You can run make from the OUTPUT_ROOT. If you have only -# one configured host, then you can also run make from the SRC_ROOT, -# since it will go look for a single spec.gmk file. Or perhaps it -# should instead make all configured hosts it can find? -AC_CONFIG_FILES([$OUTPUT_ROOT/Makefile:$AUTOCONF_DIR/Makefile.in]) - -AC_SUBST(SPEC, $OUTPUT_ROOT/spec.gmk) -AC_SUBST(CONF_NAME, $CONF_NAME) -AC_SUBST(OUTPUT_ROOT, $OUTPUT_ROOT) - -# Where are the sources. Any of these can be overridden -# using --with-override-corba and the likes. -LANGTOOLS_TOPDIR="$SRC_ROOT/langtools" -CORBA_TOPDIR="$SRC_ROOT/corba" -JAXP_TOPDIR="$SRC_ROOT/jaxp" -JAXWS_TOPDIR="$SRC_ROOT/jaxws" -HOTSPOT_TOPDIR="$SRC_ROOT/hotspot" -JDK_TOPDIR="$SRC_ROOT/jdk" -AC_SUBST(LANGTOOLS_TOPDIR) -AC_SUBST(CORBA_TOPDIR) -AC_SUBST(JAXP_TOPDIR) -AC_SUBST(JAXWS_TOPDIR) -AC_SUBST(HOTSPOT_TOPDIR) -AC_SUBST(JDK_TOPDIR) +# Must be done before we can call HELP_MSG_MISSING_DEPENDENCY. +HELP_SETUP_DEPENDENCY_HELP + +# Setup simple tools, that do not need have cross compilation support. +# Without these, we can't properly run the rest of the configure script. +BASIC_SETUP_TOOLS + +# Setup builddeps, for automatic downloading of tools we need. +# This is needed before we can call BDEPS_CHECK_MODULE, which is done in +# boot-jdk setup, but we need to have basic tools setup first. +BDEPS_CONFIGURE_BUILDDEPS +BDEPS_SCAN_FOR_BUILDDEPS # Check if pkg-config is available. PKG_PROG_PKG_CONFIG -AC_ARG_WITH(builddeps-conf, [AS_HELP_STRING([--with-builddeps-conf], - [use this configuration file for the builddeps])]) +############################################################################### +# +# Determine OpenJDK build and target platforms. +# +############################################################################### -AC_ARG_WITH(builddeps-server, [AS_HELP_STRING([--with-builddeps-server], - [download and use build dependencies from this server url, e.g. --with-builddeps-server=ftp://example.com/dir])]) +PLATFORM_SETUP_OPENJDK_BUILD_AND_TARGET +PLATFORM_SETUP_OPENJDK_BUILD_OS_VERSION -AC_ARG_WITH(builddeps-dir, [AS_HELP_STRING([--with-builddeps-dir], - [store downloaded build dependencies here @<:@d/localhome/builddeps@:>@])], - [], - [with_builddeps_dir=/localhome/builddeps]) - -AC_ARG_WITH(builddeps-group, [AS_HELP_STRING([--with-builddeps-group], - [chgrp the downloaded build dependencies to this group])]) - -AC_ARG_ENABLE([list-builddeps], [AS_HELP_STRING([--enable-list-builddeps], - [list all build dependencies known to the configure script])], - [LIST_BUILDDEPS="${enableval}"], [LIST_BUILDDEPS='no']) - -if test "x$LIST_BUILDDEPS" = xyes; then - echo - echo List of build dependencies known to the configure script, - echo that can be used in builddeps.conf files: - cat $SRC_ROOT/configure.ac | grep BDEPS_CHECK_MODUL | grep -v configure.ac | cut -f 2 -d ',' | tr -d ' ' | sort - echo - exit 1 -fi +# With knowledge of the build platform, setup more basic things. +BASIC_SETUP_PATH_SEP +BASIC_SETUP_SEARCHPATH -# If builddeps server or conf file is given. Setup buildeps usage. -BDEPS_SCAN_FOR_BUILDDEPS +############################################################################### +# +# Determine OpenJDK variants, options and version numbers. +# +############################################################################### + +# We need build & target for this. +JDKOPT_SETUP_JDK_VARIANT +JDKOPT_SETUP_JVM_VARIANTS +JDKOPT_SETUP_DEBUG_LEVEL +JDKOPT_SETUP_JDK_OPTIONS +JDKOPT_SETUP_JDK_VERSION_NUMBERS + +# To properly create a configuration name, we need to have the OpenJDK target +# and options (variants and debug level) parsed. +BASIC_SETUP_OUTPUT_DIR ############################################################################### # -# Configure the development tool paths and potential sysroot. +# Setup BootJDK, used to bootstrap the build. # -AC_LANG(C++) -DEVKIT= -SYS_ROOT=/ -AC_SUBST(SYS_ROOT) - -# The option used to specify the target .o,.a or .so file. -# When compiling, how to specify the to be created object file. -CC_OUT_OPTION='-o$(SPACE)' -# When linking, how to specify the to be created executable. -EXE_OUT_OPTION='-o$(SPACE)' -# When linking, how to specify the to be created dynamically linkable library. -LD_OUT_OPTION='-o$(SPACE)' -# When archiving, how to specify the to be create static archive for object files. -AR_OUT_OPTION='rcs$(SPACE)' -AC_SUBST(CC_OUT_OPTION) -AC_SUBST(EXE_OUT_OPTION) -AC_SUBST(LD_OUT_OPTION) -AC_SUBST(AR_OUT_OPTION) - -# If --build AND --host is set, then the configure script will find any -# cross compilation tools in the PATH. Cross compilation tools -# follows the cross compilation standard where they are prefixed with ${host}. -# For example the binary i686-sun-solaris2.10-gcc -# will cross compile for i686-sun-solaris2.10 -# If neither of build and host is not set, then build=host and the -# default compiler found in the path will be used. -# Setting only --host, does not seem to be really supported. -# Please set both --build and --host if you want to cross compile. - -DEFINE_CROSS_COMPILE_ARCH="" -HOSTCC="" -HOSTCXX="" -AC_SUBST(DEFINE_CROSS_COMPILE_ARCH) -AC_SUBST(HOST_CC) -AC_SUBST(HOST_CXX) -AC_MSG_CHECKING([if this is a cross compile]) -if test "x$build_var" != "x$host_var"; then - AC_MSG_RESULT([yes, from $build_var to $host_var]) - # We have detected a cross compile! - DEFINE_CROSS_COMPILE_ARCH="CROSS_COMPILE_ARCH:=$LEGACY_HOST_CPU1" - # Now we to find a C/C++ compiler that can build executables for the build - # platform. We can't use the AC_PROG_CC macro, since it can only be used - # once. - AC_PATH_PROGS(HOSTCC, [cl cc gcc]) - WHICHCMD(HOSTCC) - AC_PATH_PROGS(HOSTCXX, [cl CC g++]) - WHICHCMD(HOSTCXX) - # Building for the build platform should be easy. Therefore - # we do not need any linkers or assemblers etc. -else - AC_MSG_RESULT([no]) -fi - -# You can force the sys-root if the sys-root encoded into the cross compiler tools -# is not correct. -AC_ARG_WITH(sys-root, [AS_HELP_STRING([--with-sys-root], - [pass this sys-root to the compilers and linker (useful if the sys-root encoded in - the cross compiler tools is incorrect)])]) - -if test "x$with_sys_root" != x; then - SYS_ROOT=$with_sys_root -fi - -# If a devkit is found on the builddeps server, then prepend its path to the -# PATH variable. If there are cross compilers available in the devkit, these -# will be found by AC_PROG_CC et al. -BDEPS_CHECK_MODULE(DEVKIT, devkit, xxx, - [# Found devkit - PATH="$DEVKIT/bin:$PATH" - SYS_ROOT="$DEVKIT/${rewritten_host}/sys-root" - if test "x$x_includes" = "xNONE"; then - x_includes="$SYS_ROOT/usr/include/X11" - fi - if test "x$x_libraries" = "xNONE"; then - x_libraries="$SYS_ROOT/usr/lib" - fi - ], - []) - -if test "x$SYS_ROOT" != "x/" ; then - CFLAGS="--sysroot=$SYS_ROOT $CFLAGS" - CXXFLAGS="--sysroot=$SYS_ROOT $CXXFLAGS" - OBJCFLAGS="--sysroot=$SYS_ROOT $OBJCFLAGS" - OBJCXXFLAGS="--sysroot=$SYS_ROOT $OBJCFLAGS" - CPPFLAGS="--sysroot=$SYS_ROOT $CPPFLAGS" - LDFLAGS="--sysroot=$SYS_ROOT $LDFLAGS" -fi - -# Store the CFLAGS etal passed to the configure script. -ORG_CFLAGS="$CFLAGS" -ORG_CXXFLAGS="$CXXFLAGS" -ORG_OBJCFLAGS="$OBJCFLAGS" - -prepare_help_system - -# gcc is almost always present, but on Windows we -# prefer cl.exe and on Solaris we prefer CC. -# Thus test for them in this order. -AC_PROG_CC([cl cc gcc]) -if test "x$CC" = x; then - help_on_build_dependency devkit - AC_MSG_ERROR([Could not find a compiler. $HELP_MSG]) -fi -if test "x$CC" = xcc && test "x$BUILD_OS" = xmacosx; then - # Do not use cc on MacOSX use gcc instead. - CC="gcc" -fi -WHICHCMD(CC) - -AC_PROG_CXX([cl CC g++]) -if test "x$CXX" = xCC && test "x$BUILD_OS" = xmacosx; then - # The found CC, even though it seems to be a g++ derivate, cannot compile - # c++ code. Override. - CXX="g++" -fi -WHICHCMD(CXX) - -if test "x$CXX" = x || test "x$CC" = x; then - help_on_build_dependency devkit - AC_MSG_ERROR([Could not find the needed compilers! $HELP_MSG ]) -fi - -if test "x$BUILD_OS" != xwindows; then - AC_PROG_OBJC - WHICHCMD(OBJC) -else - OBJC= -fi - -# Restore the flags to the user specified values. -# This is necessary since AC_PROG_CC defaults CFLAGS to "-g -O2" -CFLAGS="$ORG_CFLAGS" -CXXFLAGS="$ORG_CXXFLAGS" -OBJCFLAGS="$ORG_OBJCFLAGS" - -# If we are not cross compiling, use the same compilers for -# building the build platform executables. -if test "x$DEFINE_CROSS_COMPILE_ARCH" = x; then - HOSTCC="$CC" - HOSTCXX="$CXX" -fi - -AC_CHECK_TOOL(LD, ld) -WHICHCMD(LD) -LD="$CC" -LDEXE="$CC" -LDCXX="$CXX" -LDEXECXX="$CXX" -# LDEXE is the linker to use, when creating executables. -AC_SUBST(LDEXE) -# Linking C++ libraries. -AC_SUBST(LDCXX) -# Linking C++ executables. -AC_SUBST(LDEXECXX) - -AC_CHECK_TOOL(AR, ar) -WHICHCMD(AR) -if test "x$BUILD_OS" = xmacosx; then - ARFLAGS="-r" -else - ARFLAGS="" -fi -AC_SUBST(ARFLAGS) - -COMPILER_NAME=gcc -COMPILER_TYPE=CC -AS_IF([test "x$BUILD_OS" = xwindows], [ - # For now, assume that we are always compiling using cl.exe. - CC_OUT_OPTION=-Fo - EXE_OUT_OPTION=-out: - LD_OUT_OPTION=-out: - AR_OUT_OPTION=-out: - # On Windows, reject /usr/bin/link, which is a cygwin - # program for something completely different. - AC_CHECK_PROG([WINLD], [link],[link],,, [/usr/bin/link]) - # Since we must ignore the first found link, WINLD will contain - # the full path to the link.exe program. - WHICHCMD_SPACESAFE([WINLD]) - LD="$WINLD" - LDEXE="$WINLD" - LDCXX="$WINLD" - LDEXECXX="$WINLD" - - AC_CHECK_PROG([MT], [mt], [mt],,, [/usr/bin/mt]) - WHICHCMD_SPACESAFE([MT]) - # The resource compiler - AC_CHECK_PROG([RC], [rc], [rc],,, [/usr/bin/rc]) - WHICHCMD_SPACESAFE([RC]) - - RC_FLAGS="-nologo /l 0x409 /r" - AS_IF([test "x$VARIANT" = xOPT], [ - RC_FLAGS="$RC_FLAGS -d NDEBUG" - ]) - JDK_UPDATE_VERSION_NOTNULL=$JDK_UPDATE_VERSION - AS_IF([test "x$JDK_UPDATE_VERSION" = x], [ - JDK_UPDATE_VERSION_NOTNULL=0 - ]) - RC_FLAGS="$RC_FLAGS -d \"JDK_BUILD_ID=$FULL_VERSION\"" - RC_FLAGS="$RC_FLAGS -d \"JDK_COMPANY=$COMPANY_NAME\"" - RC_FLAGS="$RC_FLAGS -d \"JDK_COMPONENT=$PRODUCT_NAME $JDK_RC_PLATFORM_NAME binary\"" - RC_FLAGS="$RC_FLAGS -d \"JDK_VER=$JDK_MINOR_VERSION.$JDK_MICRO_VERSION.$JDK_UPDATE_VERSION_NOTNULL.$COOKED_BUILD_NUMBER\"" - RC_FLAGS="$RC_FLAGS -d \"JDK_COPYRIGHT=Copyright \xA9 $COPYRIGHT_YEAR\"" - RC_FLAGS="$RC_FLAGS -d \"JDK_NAME=$PRODUCT_NAME $JDK_RC_PLATFORM_NAME $JDK_MINOR_VERSION $JDK_UPDATE_META_TAG\"" - RC_FLAGS="$RC_FLAGS -d \"JDK_FVER=$JDK_MINOR_VERSION,$JDK_MICRO_VERSION,$JDK_UPDATE_VERSION_NOTNULL,$COOKED_BUILD_NUMBER\"" - - # lib.exe is used to create static libraries. - AC_CHECK_PROG([WINAR], [lib],[lib],,,) - WHICHCMD_SPACESAFE([WINAR]) - AR="$WINAR" - ARFLAGS="-nologo -NODEFAULTLIB:MSVCRT" - - AC_CHECK_PROG([DUMPBIN], [dumpbin], [dumpbin],,,) - WHICHCMD_SPACESAFE([DUMPBIN]) - - COMPILER_TYPE=CL - CCXXFLAGS="$CCXXFLAGS -nologo" - LDFLAGS="$LDFLAGS -nologo -opt:ref -incremental:no" - if test "x$LEGACY_HOST_CPU1" = xi586; then - LDFLAGS="$LDFLAGS -safeseh" - fi - # TODO: make -debug optional "--disable-full-debug-symbols" - LDFLAGS="$LDFLAGS -debug" -]) -AC_SUBST(RC_FLAGS) -AC_SUBST(COMPILER_TYPE) - -AC_PROG_CPP -WHICHCMD(CPP) - -AC_PROG_CXXCPP -WHICHCMD(CXXCPP) - -# Find the right assembler. -if test "x$BUILD_OS" = xsolaris; then - AC_PATH_PROG(AS, as) - WHICHCMD(AS) - ASFLAGS=" " -else - AS="$CC -c" - ASFLAGS=" " -fi -AC_SUBST(AS) -AC_SUBST(ASFLAGS) - -if test "x$HOST_CPU_BITS" = x32 && test "x$HOST_OS" = xmacosx; then - # On 32-bit MacOSX the OS requires C-entry points to be 16 byte aligned. - # While waiting for a better solution, the current workaround is to use -mstackrealign. - CFLAGS="$CFLAGS -mstackrealign" - AC_MSG_CHECKING([if 32-bit compiler supports -mstackrealign]) - AC_LINK_IFELSE([AC_LANG_SOURCE([[int main() { return 0; }]])], - [ - AC_MSG_RESULT([yes]) - ], - [ - AC_MSG_RESULT([no]) - AC_MSG_ERROR([The selected compiler $CXX does not support -mstackrealign! Try to put another compiler in the path.]) - ]) -fi - -if test "x$BUILD_OS" = xsolaris; then - AC_PATH_PROG(NM, nm) - WHICHCMD(NM) - AC_PATH_PROG(STRIP, strip) - WHICHCMD(STRIP) - AC_PATH_PROG(MCS, mcs) - WHICHCMD(MCS) -else - AC_CHECK_TOOL(NM, nm) - WHICHCMD(NM) - AC_CHECK_TOOL(STRIP, strip) - WHICHCMD(STRIP) -fi - -# When using cygwin, we need a wrapper binary that renames -# /cygdrive/c/ arguments into c:/ arguments and peeks into -# @files and rewrites these too! This wrapper binary is -# called uncygdrive.exe. -UNCYGDRIVE= -if test "x$BUILD_OS" = xwindows; then - AC_MSG_CHECKING([if uncygdrive can be created]) - UNCYGDRIVE_SRC=`$CYGPATH -m $SRC_ROOT/common/src/uncygdrive.c` - rm -f $OUTPUT_ROOT/uncygdrive* - UNCYGDRIVE=`$CYGPATH -m $OUTPUT_ROOT/uncygdrive.exe` - cd $OUTPUT_ROOT - $CC $UNCYGDRIVE_SRC /Fe$UNCYGDRIVE > $OUTPUT_ROOT/uncygdrive1.log 2>&1 - cd $CURDIR - - if test ! -x $OUTPUT_ROOT/uncygdrive.exe; then - AC_MSG_RESULT([no]) - cat $OUTPUT_ROOT/uncygdrive1.log - AC_MSG_ERROR([Could not create $OUTPUT_ROOT/uncygdrive.exe]) - fi - AC_MSG_RESULT([$UNCYGDRIVE]) - AC_MSG_CHECKING([if uncygdrive.exe works]) - cd $OUTPUT_ROOT - $UNCYGDRIVE $CC $SRC_ROOT/common/src/uncygdrive.c /Fe$OUTPUT_ROOT/uncygdrive2.exe > $OUTPUT_ROOT/uncygdrive2.log 2>&1 - cd $CURDIR - if test ! -x $OUTPUT_ROOT/uncygdrive2.exe; then - AC_MSG_RESULT([no]) - cat $OUTPUT_ROOT/uncygdrive2.log - AC_MSG_ERROR([Uncygdrive did not work!]) - fi - AC_MSG_RESULT([yes]) - rm -f $OUTPUT_ROOT/uncygdrive?.??? $OUTPUT_ROOT/uncygdrive.obj -fi - -AC_SUBST(UNCYGDRIVE) - -TESTFOR_PROG_CCACHE - -# Used on GNU/Linux systems, can be empty... -#AC_PATH_PROG(ELFDUMP, elfdump) - -# Setup default logging of stdout and stderr to build.log in the output root. -BUILD_LOG='$(OUTPUT_ROOT)/build.log' -BUILD_LOG_WRAPPER='$(SH) $(SRC_ROOT)/common/bin/logger.sh $(BUILD_LOG)' -AC_SUBST(BUILD_LOG) -AC_SUBST(BUILD_LOG_WRAPPER) - -############################################################################### -# -# Now we check if libjvm.so will use 32 or 64 bit pointers for the C/C++ code. -# (The JVM can use 32 or 64 bit Java pointers but that decision -# is made at runtime.) -# -AC_LANG_PUSH(C++) -OLD_CXXFLAGS="$CXXFLAGS" -if test "x$HOST_OS" = xsolaris && test "x$with_data_model" != x; then - CXXFLAGS="-m{$with_data_model} $CXXFLAGS" -fi -AC_CHECK_SIZEOF([int *], [1111]) -CXXFLAGS="$OLD_CXXFLAGS" -AC_LANG_POP(C++) - -if test "x$ac_cv_sizeof_int_p" = x0; then - # The test failed, lets pick the assumed value. - ARCH_DATA_MODEL=$HOST_CPU_BITS -else - ARCH_DATA_MODEL=`expr 8 \* $ac_cv_sizeof_int_p` -fi - -if test "x$ARCH_DATA_MODEL" = x64; then - A_LP64="LP64:=" - ADD_LP64="-D_LP64=1" -fi -AC_MSG_CHECKING([for host address size]) -AC_MSG_RESULT([$ARCH_DATA_MODEL bits]) -AC_SUBST(LP64,$A_LP64) -AC_SUBST(ARCH_DATA_MODEL) - -if test "x$ARCH_DATA_MODEL" != "x$HOST_CPU_BITS"; then - AC_MSG_ERROR([The tested number of bits in the host ($ARCH_DATA_MODEL) differs from the number of bits expected to be found in the host ($HOST_CPU_BITS)]) -fi +############################################################################### + +BOOTJDK_SETUP_BOOT_JDK +BOOTJDK_SETUP_BOOT_JDK_ARGUMENTS ############################################################################### # +# Configure the sources to use. We can add or override individual directories. +# +############################################################################### + +SRCDIRS_SETUP_TOPDIRS +SRCDIRS_SETUP_ALTERNATIVE_TOPDIRS +SRCDIRS_SETUP_OUTPUT_DIRS + +############################################################################### +# +# Setup the toolchain (compilers etc), i.e. the tools that need to be +# cross-compilation aware. +# +############################################################################### + +TOOLCHAIN_SETUP_SYSROOT_AND_OUT_OPTIONS +TOOLCHAIN_SETUP_VISUAL_STUDIO_ENV +# Locate the actual tools +TOOLCHAIN_SETUP_PATHS + +# FIXME: Currently we must test this after paths but before flags. Fix! + +# And we can test some aspects on the target using configure macros. +PLATFORM_TEST_OPENJDK_TARGET_BITS +PLATFORM_SETUP_OPENJDK_TARGET_ENDIANNESS + +# Configure flags for the tools +TOOLCHAIN_SETUP_COMPILER_FLAGS_FOR_LIBS +TOOLCHAIN_SETUP_COMPILER_FLAGS_FOR_OPTIMIZATION +TOOLCHAIN_SETUP_COMPILER_FLAGS_FOR_JDK + +# After we have toolchain, we can compile the uncygdrive helper +BASIC_COMPILE_UNCYGDRIVE + + +# Setup debug symbols (need objcopy from the toolchain for that) +JDKOPT_SETUP_DEBUG_SYMBOLS + +############################################################################### +# +# Check dependencies for external and internal libraries. +# +############################################################################### + +LIB_SETUP_INIT +LIB_SETUP_X11 +LIB_SETUP_CUPS +LIB_SETUP_FREETYPE +LIB_SETUP_ALSA +LIB_SETUP_MISC_LIBS +LIB_SETUP_STATIC_LINK_LIBSTDCPP + +############################################################################### +# +# We need to do some final tweaking, when everything else is done. +# +############################################################################### + +JDKOPT_SETUP_BUILD_TWEAKS + +############################################################################### +# +# Configure parts of the build that only affect the build performance, +# not the result. +# +############################################################################### + +BPERF_SETUP_BUILD_CORES +BPERF_SETUP_BUILD_MEMORY + +# Setup smart javac (after cores and memory have been setup) +BPERF_SETUP_SMART_JAVAC + # Can the C/C++ compiler use precompiled headers? +BPERF_SETUP_PRECOMPILED_HEADERS + +# Setup use of ccache, if available +BPERF_SETUP_CCACHE + +############################################################################### +# +# And now the finish... # -AC_ARG_ENABLE([precompiled-headers], [AS_HELP_STRING([--disable-precompiled-headers], - [use precompiled headers when compiling C++ @<:@enabled@:>@])], - [ENABLE_PRECOMPH=${enable_precompiled-headers}], [ENABLE_PRECOMPH=yes]) - -USE_PRECOMPILED_HEADER=1 -if test "x$ENABLE_PRECOMPH" = xno; then - USE_PRECOMPILED_HEADER=0 -fi - -if test "x$ENABLE_PRECOMPH" = xyes; then - # Check that the compiler actually supports precomp headers. - if test "x$GCC" = xyes; then - AC_MSG_CHECKING([that precompiled headers work]) - echo "int alfa();" > conftest.h - $CXX -x c++-header conftest.h -o conftest.hpp.gch - if test ! -f conftest.hpp.gch; then - echo Precompiled header is not working! - USE_PRECOMPILED_HEADER=0 - AC_MSG_RESULT([no]) - else - AC_MSG_RESULT([yes]) - fi - rm -f conftest.h - fi -fi - -AC_SUBST(USE_PRECOMPILED_HEADER) - -############################################################################### -# -# How to compile shared libraries. -# - -if test "x$GCC" = xyes; then - COMPILER_NAME=gcc - PICFLAG="-fPIC" - LIBRARY_PREFIX=lib - SHARED_LIBRARY='lib$1.so' - STATIC_LIBRARY='lib$1.a' - SHARED_LIBRARY_FLAGS="-shared" - SHARED_LIBRARY_SUFFIX='.so' - STATIC_LIBRARY_SUFFIX='.a' - OBJ_SUFFIX='.o' - EXE_SUFFIX='' - SET_SHARED_LIBRARY_NAME='-Xlinker -soname=$1' - SET_SHARED_LIBRARY_MAPFILE='-Xlinker -version-script=$1' - C_FLAG_REORDER='' - CXX_FLAG_REORDER='' - SET_SHARED_LIBRARY_ORIGIN='-Xlinker -z -Xlinker origin -Xlinker -rpath -Xlinker \$$$$ORIGIN/$1' - LD="$CC" - LDEXE="$CC" - LDCXX="$CXX" - LDEXECXX="$CXX" - # TODO: for embedded set --strip-unneeded - POST_STRIP_CMD="$STRIP -g" - - # Linking is different on MacOSX - if test "x$BUILD_OS" = xmacosx; then - # Might change in the future to clang. - COMPILER_NAME=gcc - SHARED_LIBRARY='lib$1.dylib' - SHARED_LIBRARY_FLAGS="-dynamiclib -compatibility_version 1.0.0 -current_version 1.0.0 $PICFLAG" - SHARED_LIBRARY_SUFFIX='.dylib' - EXE_SUFFIX='' - SET_SHARED_LIBRARY_NAME='-Xlinker -install_name -Xlinker @rpath/$1' - SET_SHARED_LIBRARY_MAPFILE='' - SET_SHARED_LIBRARY_ORIGIN='-Xlinker -rpath -Xlinker @loader_path/.' - POST_STRIP_CMD="$STRIP -S" - fi -else - if test "x$BUILD_OS" = xsolaris; then - # If it is not gcc, then assume it is the Oracle Solaris Studio Compiler - COMPILER_NAME=ossc - PICFLAG="-KPIC" - LIBRARY_PREFIX=lib - SHARED_LIBRARY='lib$1.so' - STATIC_LIBRARY='lib$1.a' - SHARED_LIBRARY_FLAGS="-G" - SHARED_LIBRARY_SUFFIX='.so' - STATIC_LIBRARY_SUFFIX='.a' - OBJ_SUFFIX='.o' - EXE_SUFFIX='' - SET_SHARED_LIBRARY_NAME='' - SET_SHARED_LIBRARY_MAPFILE='-M $1' - C_FLAG_REORDER='-xF' - CXX_FLAG_REORDER='-xF' - SET_SHARED_LIBRARY_ORIGIN='-R \$$$$ORIGIN/$1' - CFLAGS_JDKLIB_EXTRA='-xstrconst -D__solaris__' - POST_STRIP_CMD="$STRIP -x" - POST_MCS_CMD="$MCS -d -a \"JDK $FULL_VERSION\"" - fi - if test "x$BUILD_OS" = xwindows; then - # If it is not gcc, then assume it is the MS Visual Studio compiler - COMPILER_NAME=cl - PICFLAG="" - LIBRARY_PREFIX= - SHARED_LIBRARY='$1.dll' - STATIC_LIBRARY='$1.lib' - SHARED_LIBRARY_FLAGS="-LD" - SHARED_LIBRARY_SUFFIX='.dll' - STATIC_LIBRARY_SUFFIX='.lib' - OBJ_SUFFIX='.obj' - EXE_SUFFIX='.exe' - SET_SHARED_LIBRARY_NAME='' - SET_SHARED_LIBRARY_MAPFILE='' - SET_SHARED_LIBRARY_ORIGIN='' - fi -fi - -AC_SUBST(OBJ_SUFFIX) -AC_SUBST(SHARED_LIBRARY) -AC_SUBST(STATIC_LIBRARY) -AC_SUBST(LIBRARY_PREFIX) -AC_SUBST(SHARED_LIBRARY_SUFFIX) -AC_SUBST(STATIC_LIBRARY_SUFFIX) -AC_SUBST(EXE_SUFFIX) -AC_SUBST(SHARED_LIBRARY_FLAGS) -AC_SUBST(SET_SHARED_LIBRARY_NAME) -AC_SUBST(SET_SHARED_LIBRARY_MAPFILE) -AC_SUBST(C_FLAG_REORDER) -AC_SUBST(CXX_FLAG_REORDER) -AC_SUBST(SET_SHARED_LIBRARY_ORIGIN) -AC_SUBST(POST_STRIP_CMD) -AC_SUBST(POST_MCS_CMD) - -# The (cross) compiler is now configured, we can now test capabilities -# of the host platform. - -############################################################################### -# -# Is the host little of big endian? -# -AC_C_BIGENDIAN([ENDIAN="big"],[ENDIAN="little"],[ENDIAN="unknown"],[ENDIAN="universal"]) - -if test "x$ENDIAN" = xuniversal; then - AC_MSG_ERROR([It seems like someone needs to decide how we are to deal with universal binaries on the MacOSX?]) -fi -if test "x$ENDIAN" = xunknown; then - ENDIAN="$HOST_CPU_ENDIAN" -fi -if test "x$ENDIAN" != "x$HOST_CPU_ENDIAN"; then - AC_MSG_WARN([The tested endian in the host ($ENDIAN) differs from the endian expected to be found in the host ($HOST_CPU_ENDIAN)]) - ENDIAN="$HOST_CPU_ENDIAN" -fi -AC_SUBST(ENDIAN) - -############################################################################### -# -# We need a Boot JDK to bootstrap the build. -# -BOOT_JDK_FOUND=no -AC_ARG_WITH(boot-jdk, [AS_HELP_STRING([--with-boot-jdk], - [path to Boot JDK (used to bootstrap build) @<:@probed@:>@])]) - -if test "x$with_boot_jdk" != x; then - BOOT_JDK=$with_boot_jdk - BOOT_JDK_FOUND=yes -fi -if test "x$BOOT_JDK_FOUND" = xno; then - BDEPS_CHECK_MODULE(BOOT_JDK, boot-jdk, xxx, [BOOT_JDK_FOUND=yes], [BOOT_JDK_FOUND=no]) -fi - -if test "x$BOOT_JDK_FOUND" = xno; then - if test "x$JAVA_HOME" != x; then - if test ! -d "$JAVA_HOME"; then - AC_MSG_ERROR([Your JAVA_HOME points to a non-existing directory!]) - fi - # Aha, the user has set a JAVA_HOME - # let us use that as the Boot JDK. - BOOT_JDK="$JAVA_HOME" - BOOT_JDK_FOUND=yes - # To be on the safe side, lets check that it is a JDK. - if test -x "$BOOT_JDK/bin/javac" && test -x "$BOOT_JDK/bin/java"; then - JAVAC="$BOOT_JDK/bin/javac" - JAVA="$BOOT_JDK/bin/java" - BOOT_JDK_FOUND=yes - else - AC_MSG_ERROR([Your JAVA_HOME points to a JRE! The build needs a JDK! Please point JAVA_HOME to a JDK. JAVA_HOME=[$]JAVA_HOME]) - fi - fi -fi - -if test "x$BOOT_JDK_FOUND" = xno; then - AC_PATH_PROG(JAVAC_CHECK, javac) - AC_PATH_PROG(JAVA_CHECK, java) - BINARY="$JAVAC_CHECK" - if test "x$JAVAC_CHECK" = x; then - BINARY="$JAVA_CHECK" - fi - if test "x$BINARY" != x; then - # So there is a java(c) binary, it might be part of a JDK. - # Lets find the JDK/JRE directory by following symbolic links. - # Linux/GNU systems often have links from /usr/bin/java to - # /etc/alternatives/java to the real JDK binary. - WHICHCMD_SPACESAFE(BINARY,[path to javac]) - REMOVE_SYMBOLIC_LINKS(BINARY) - BOOT_JDK=`dirname $BINARY` - BOOT_JDK=`cd $BOOT_JDK/..; pwd` - if test -x $BOOT_JDK/bin/javac && test -x $BOOT_JDK/bin/java; then - JAVAC=$BOOT_JDK/bin/javac - JAVA=$BOOT_JDK/bin/java - BOOT_JDK_FOUND=yes - fi - fi -fi - -if test "x$BOOT_JDK_FOUND" = xno; then - # Try the MacOSX way. - if test -x /usr/libexec/java_home; then - BOOT_JDK=`/usr/libexec/java_home` - if test -x $BOOT_JDK/bin/javac && test -x $BOOT_JDK/bin/java; then - JAVAC=$BOOT_JDK/bin/javac - JAVA=$BOOT_JDK/bin/java - BOOT_JDK_FOUND=yes - fi - fi -fi - -if test "x$BOOT_JDK_FOUND" = xno; then - AC_PATH_PROG(JAVA_CHECK, java) - if test "x$JAVA_CHECK" != x; then - # There is a java in the path. But apparently we have not found a javac - # in the path, since that would have been tested earlier. - if test "x$HOST_OS" = xwindows; then - # Now if this is a windows platform. The default installation of a JDK - # actually puts the JRE in the path and keeps the JDK out of the path! - # Go look in the default installation location. - BOOT_JDK=/cygdrive/c/Program\ Files/Java/`ls /cygdrive/c/Program\ Files/Java | grep jdk | sort -r | head --lines 1` - if test -d "$BOOT_JDK"; then - BOOT_JDK_FOUND=yes - fi - fi - if test "x$BOOT_JDK_FOUND" = xno; then - help_on_build_dependency openjdk - AC_MSG_ERROR([Found a JRE, not not a JDK! Please remove the JRE from your path and put a JDK there instead. $HELP_MSG]) - fi - else - help_on_build_dependency openjdk - AC_MSG_ERROR([Could not find a JDK. $HELP_MSG]) - fi -fi - -WIN_FIX_PATH(BOOT_JDK) - -# Now see if we can find the rt.jar, or its nearest equivalent. -BOOT_RTJAR="$BOOT_JDK/jre/lib/rt.jar" -SPACESAFE(BOOT_RTJAR,[the path to the Boot JDK rt.jar (or nearest equivalent)]) - -BOOT_TOOLSJAR="$BOOT_JDK/lib/tools.jar" -SPACESAFE(BOOT_TOOLSJAR,[the path to the Boot JDK tools.jar (or nearest equivalent)]) - -if test ! -f $BOOT_RTJAR; then - # On MacOSX it is called classes.jar - BOOT_RTJAR=$BOOT_JDK/../Classes/classes.jar - if test ! -f $BOOT_RTJAR; then - AC_MSG_ERROR([Cannot find the rt.jar or its equivalent!]) - fi - # Remove the .. - BOOT_RTJAR="`cd ${BOOT_RTJAR%/*} && pwd`/${BOOT_RTJAR##*/}" - # The tools.jar is part of classes.jar - BOOT_TOOLSJAR="$BOOT_RTJAR" -fi - -AC_SUBST(BOOT_JDK) -AC_SUBST(BOOT_RTJAR) -AC_SUBST(BOOT_TOOLSJAR) -AC_MSG_CHECKING([for Boot JDK]) -AC_MSG_RESULT([$BOOT_JDK]) -AC_MSG_CHECKING([for Boot rt.jar]) -AC_MSG_RESULT([$BOOT_RTJAR]) -AC_MSG_CHECKING([for Boot tools.jar]) -AC_MSG_RESULT([$BOOT_TOOLSJAR]) - -# Use the java tool from the Boot JDK. -AC_MSG_CHECKING([for java in Boot JDK]) -JAVA=$BOOT_JDK/bin/java -if test ! -x $JAVA; then - AC_MSG_ERROR([Could not find a working java]) -fi -BOOT_JDK_VERSION=`$JAVA -version 2>&1 | head -n 1` -AC_MSG_RESULT([yes $BOOT_JDK_VERSION]) -AC_SUBST(JAVA) - -# Extra M4 quote needed to protect [] in grep expression. -[FOUND_VERSION_78=`echo $BOOT_JDK_VERSION | grep '\"1\.[78]\.'`] -if test "x$FOUND_VERSION_78" = x; then - help_on_build_dependency openjdk - AC_MSG_ERROR([Your boot-jdk must be version 7 or 8. $HELP_MSG]) -fi - -# When compiling code to be executed by the Boot JDK, force jdk7 compatibility. -BOOT_JDK_SOURCETARGET="-source 7 -target 7" -AC_SUBST(BOOT_JDK_SOURCETARGET) - -# Use the javac tool from the Boot JDK. -AC_MSG_CHECKING([for javac in Boot JDK]) -JAVAC=$BOOT_JDK/bin/javac -if test ! -x $JAVAC; then - AC_MSG_ERROR([Could not find a working javac]) -fi -AC_MSG_RESULT(yes) -AC_SUBST(JAVAC) -AC_SUBST(JAVAC_FLAGS) - -# Use the javah tool from the Boot JDK. -AC_MSG_CHECKING([for javah in Boot JDK]) -JAVAH=$BOOT_JDK/bin/javah -if test ! -x $JAVAH; then - AC_MSG_ERROR([Could not find a working javah]) -fi -AC_MSG_RESULT(yes) -AC_SUBST(JAVAH) - -# Use the jar tool from the Boot JDK. -AC_MSG_CHECKING([for jar in Boot JDK]) -JAR=$BOOT_JDK/bin/jar -if test ! -x $JAR; then - AC_MSG_ERROR([Could not find a working jar]) -fi -AC_SUBST(JAR) -AC_MSG_RESULT(yes) - -# Use the rmic tool from the Boot JDK. -AC_MSG_CHECKING([for rmic in Boot JDK]) -RMIC=$BOOT_JDK/bin/rmic -if test ! -x $RMIC; then - AC_MSG_ERROR([Could not find a working rmic]) -fi -AC_SUBST(RMIC) -AC_MSG_RESULT(yes) - -# Use the native2ascii tool from the Boot JDK. -AC_MSG_CHECKING([for native2ascii in Boot JDK]) -NATIVE2ASCII=$BOOT_JDK/bin/native2ascii -if test ! -x $NATIVE2ASCII; then - AC_MSG_ERROR([Could not find a working native2ascii]) -fi -AC_MSG_RESULT(yes) -AC_SUBST(NATIVE2ASCII) - -############################################################################### -# -# Pickup additional source for a component from outside of the source root -# or override source for a component. -# -AC_ARG_WITH(add-source-root, [AS_HELP_STRING([--with-add-source-root], - [for each and every source directory, look in this additional source root for - the same directory; if it exists and have files in it, include it in the build])]) - -AC_ARG_WITH(override-source-root, [AS_HELP_STRING([--with-override-source-root], - [for each and every source directory, look in this override source root for - the same directory; if it exists, use that directory instead and - ignore the directory in the original source root])]) - -AC_ARG_WITH(adds-and-overrides, [AS_HELP_STRING([--with-adds-and-overrides], - [use the subdirs 'adds' and 'overrides' in the specified directory as - add-source-root and override-source-root])]) - -if test "x$with_adds_and_overrides" != x; then - with_add_source_root="$with_adds_and_overrides/adds" - with_override_source_root="$with_adds_and_overrides/overrides" -fi - -if test "x$with_add_source_root" != x; then - if ! test -d $with_add_source_root; then - AC_MSG_ERROR([Trying to use a non-existant add-source-root $with_add_source_root]) - fi - CURDIR="$PWD" - cd "$with_add_source_root" - ADD_SRC_ROOT="`pwd`" - cd "$CURDIR" - # Verify that the addon source root does not have any root makefiles. - # If it does, then it is usually an error, prevent this. - if test -f $with_add_source_root/langtools/makefiles/Makefile || \ - test -f $with_add_source_root/langtools/make/Makefile; then - AC_MSG_ERROR([Your add source root seems to contain a full langtools repo! An add source root should only contain additional sources.]) - fi - if test -f $with_add_source_root/corba/makefiles/Makefile || \ - test -f $with_add_source_root/corba/make/Makefile; then - AC_MSG_ERROR([Your add source root seems to contain a full corba repo! An add source root should only contain additional sources.]) - fi - if test -f $with_add_source_root/jaxp/makefiles/Makefile || \ - test -f $with_add_source_root/jaxp/make/Makefile; then - AC_MSG_ERROR([Your add source root seems to contain a full jaxp repo! An add source root should only contain additional sources.]) - fi - if test -f $with_add_source_root/jaxws/makefiles/Makefile || \ - test -f $with_add_source_root/jaxws/make/Makefile; then - AC_MSG_ERROR([Your add source root seems to contain a full jaxws repo! An add source root should only contain additional sources.]) - fi - if test -f $with_add_source_root/hotspot/makefiles/Makefile || \ - test -f $with_add_source_root/hotspot/make/Makefile; then - AC_MSG_ERROR([Your add source root seems to contain a full hotspot repo! An add source root should only contain additional sources.]) - fi - if test -f $with_add_source_root/jdk/makefiles/Makefile || \ - test -f $with_add_source_root/jdk/make/Makefile; then - AC_MSG_ERROR([Your add source root seems to contain a full JDK repo! An add source root should only contain additional sources.]) - fi -fi -AC_SUBST(ADD_SRC_ROOT) - -if test "x$with_override_source_root" != x; then - if ! test -d $with_override_source_root; then - AC_MSG_ERROR([Trying to use a non-existant override-source-root $with_override_source_root]) - fi - CURDIR="$PWD" - cd "$with_override_source_root" - OVERRIDE_SRC_ROOT="`pwd`" - cd "$CURDIR" - if test -f $with_override_source_root/langtools/makefiles/Makefile || \ - test -f $with_override_source_root/langtools/make/Makefile; then - AC_MSG_ERROR([Your override source root seems to contain a full langtools repo! An override source root should only contain sources that override.]) - fi - if test -f $with_override_source_root/corba/makefiles/Makefile || \ - test -f $with_override_source_root/corba/make/Makefile; then - AC_MSG_ERROR([Your override source root seems to contain a full corba repo! An override source root should only contain sources that override.]) - fi - if test -f $with_override_source_root/jaxp/makefiles/Makefile || \ - test -f $with_override_source_root/jaxp/make/Makefile; then - AC_MSG_ERROR([Your override source root seems to contain a full jaxp repo! An override source root should only contain sources that override.]) - fi - if test -f $with_override_source_root/jaxws/makefiles/Makefile || \ - test -f $with_override_source_root/jaxws/make/Makefile; then - AC_MSG_ERROR([Your override source root seems to contain a full jaxws repo! An override source root should only contain sources that override.]) - fi - if test -f $with_override_source_root/hotspot/makefiles/Makefile || \ - test -f $with_override_source_root/hotspot/make/Makefile; then - AC_MSG_ERROR([Your override source root seems to contain a full hotspot repo! An override source root should only contain sources that override.]) - fi - if test -f $with_override_source_root/jdk/makefiles/Makefile || \ - test -f $with_override_source_root/jdk/make/Makefile; then - AC_MSG_ERROR([Your override source root seems to contain a full JDK repo! An override source root should only contain sources that override.]) - fi -fi -AC_SUBST(OVERRIDE_SRC_ROOT) - -############################################################################### -# -# Override a repo completely, this is used for example when you have 3 small -# development sandboxes of the langtools sources and want to avoid having 3 full -# OpenJDK sources checked out on disk. -# -# Assuming that the 3 langtools sandboxes are located here: -# /home/fredrik/sandbox1/langtools -# /home/fredrik/sandbox2/langtools -# /home/fredrik/sandbox3/langtools -# -# From the source root you create build subdirs manually: -# mkdir -p build1 build2 build3 -# in each build directory run: -# (cd build1 && ../configure --with-override-langtools=/home/fredrik/sandbox1 && make) -# (cd build2 && ../configure --with-override-langtools=/home/fredrik/sandbox2 && make) -# (cd build3 && ../configure --with-override-langtools=/home/fredrik/sandbox3 && make) -# - -AC_ARG_WITH(override-langtools, [AS_HELP_STRING([--with-override-langtools], - [use this langtools dir for the build])]) - -AC_ARG_WITH(override-corba, [AS_HELP_STRING([--with-override-corba], - [use this corba dir for the build])]) - -AC_ARG_WITH(override-jaxp, [AS_HELP_STRING([--with-override-jaxp], - [use this jaxp dir for the build])]) - -AC_ARG_WITH(override-jaxws, [AS_HELP_STRING([--with-override-jaxws], - [use this jaxws dir for the build])]) - -AC_ARG_WITH(override-hotspot, [AS_HELP_STRING([--with-override-hotspot], - [use this hotspot dir for the build])]) - -AC_ARG_WITH(override-jdk, [AS_HELP_STRING([--with-override-jdk], - [use this jdk dir for the build])]) - -if test "x$with_override_langtools" != x; then - CURDIR="$PWD" - cd "$with_override_langtools" - LANGTOOLS_TOPDIR="`pwd`" - cd "$CURDIR" - if ! test -f $LANGTOOLS_TOPDIR/makefiles/Makefile; then - AC_MSG_ERROR([You have to override langtools with a full langtools repo!]) - fi - AC_MSG_CHECKING([if langtools should be overridden]) - AC_MSG_RESULT([yes with $LANGTOOLS_TOPDIR]) -fi -if test "x$with_override_corba" != x; then - CURDIR="$PWD" - cd "$with_override_corba" - CORBA_TOPDIR="`pwd`" - cd "$CURDIR" - if ! test -f $CORBA_TOPDIR/makefiles/Makefile; then - AC_MSG_ERROR([You have to override corba with a full corba repo!]) - fi - AC_MSG_CHECKING([if corba should be overridden]) - AC_MSG_RESULT([yes with $CORBA_TOPDIR]) -fi -if test "x$with_override_jaxp" != x; then - CURDIR="$PWD" - cd "$with_override_jaxp" - JAXP_TOPDIR="`pwd`" - cd "$CURDIR" - if ! test -f $JAXP_TOPDIR/makefiles/Makefile; then - AC_MSG_ERROR([You have to override jaxp with a full jaxp repo!]) - fi - AC_MSG_CHECKING([if jaxp should be overridden]) - AC_MSG_RESULT([yes with $JAXP_TOPDIR]) -fi -if test "x$with_override_jaxws" != x; then - CURDIR="$PWD" - cd "$with_override_jaxws" - JAXWS_TOPDIR="`pwd`" - cd "$CURDIR" - if ! test -f $JAXWS_TOPDIR/makefiles/Makefile; then - AC_MSG_ERROR([You have to override jaxws with a full jaxws repo!]) - fi - AC_MSG_CHECKING([if jaxws should be overridden]) - AC_MSG_RESULT([yes with $JAXWS_TOPDIR]) -fi -if test "x$with_override_hotspot" != x; then - CURDIR="$PWD" - cd "$with_override_hotspot" - HOTSPOT_TOPDIR="`pwd`" - cd "$CURDIR" - if ! test -f $HOTSPOT_TOPDIR/make/Makefile && \ - ! test -f $HOTSPOT_TOPDIR/makefiles/Makefile; then - AC_MSG_ERROR([You have to override hotspot with a full hotspot repo!]) - fi - AC_MSG_CHECKING([if hotspot should be overridden]) - AC_MSG_RESULT([yes with $HOTSPOT_TOPDIR]) -fi -if test "x$with_override_jdk" != x; then - CURDIR="$PWD" - cd "$with_override_jdk" - JDK_TOPDIR="`pwd`" - cd "$CURDIR" - if ! test -f $JDK_TOPDIR/makefiles/Makefile; then - AC_MSG_ERROR([You have to override JDK with a full JDK repo!]) - fi - AC_MSG_CHECKING([if JDK should be overridden]) - AC_MSG_RESULT([yes with $JDK_TOPDIR]) -fi - -############################################################################### -# -# Specify options for anything that is run with the Boot JDK. -# -AC_ARG_WITH(boot-jdk-jvmargs, [AS_HELP_STRING([--with-boot-jdk-jvmargs], - [specify JVM arguments to be passed to all invocations of the Boot JDK, overriding the default values, - e.g --with-boot-jdk-jvmargs="-Xmx8G -enableassertions"])]) - -if test "x$with_boot_jdk_jvmargs" = x; then - # Not all JVM:s accept the same arguments on the command line. - # OpenJDK specific increase in thread stack for JDK build, - # well more specifically, when running javac. - if test "x$BUILD_NUM_BITS" = x32; then - STACK_SIZE=768 - else - # Running Javac on a JVM on a 64-bit machine, the stack takes more space - # since 64-bit pointers are pushed on the stach. Apparently, we need - # to increase the stack space when javacing the JDK.... - STACK_SIZE=1536 - fi - - # Minimum amount of heap memory. - ADD_JVM_ARG_IF_OK([-Xms64M],boot_jdk_jvmargs,[$JAVA]) - if test "x$HOST_OS" = "xmacosx"; then - # Why does macosx need more heap? Its the huge JDK batch. - ADD_JVM_ARG_IF_OK([-Xmx1600M],boot_jdk_jvmargs,[$JAVA]) - else - ADD_JVM_ARG_IF_OK([-Xmx1100M],boot_jdk_jvmargs,[$JAVA]) - fi - # When is adding -client something that speeds up the JVM? - # ADD_JVM_ARG_IF_OK([-client],boot_jdk_jvmargs,[$JAVA]) - ADD_JVM_ARG_IF_OK([-XX:PermSize=32m],boot_jdk_jvmargs,[$JAVA]) - ADD_JVM_ARG_IF_OK([-XX:MaxPermSize=160m],boot_jdk_jvmargs,[$JAVA]) - ADD_JVM_ARG_IF_OK([-XX:ThreadStackSize=$STACK_SIZE],boot_jdk_jvmargs,[$JAVA]) - # Disable special log output when a debug build is used as Boot JDK... - ADD_JVM_ARG_IF_OK([-XX:-PrintVMOptions -XX:-UnlockDiagnosticVMOptions -XX:-LogVMOutput],boot_jdk_jvmargs,[$JAVA]) -fi - -AC_SUBST(BOOT_JDK_JVMARGS, $boot_jdk_jvmargs) - -AC_ARG_WITH(server-java, [AS_HELP_STRING([--with-server-java], - [use this java binary for running the javac background server and other long running java tasks in the build process, - e.g. ---with-server-java="/opt/jrockit/bin/java -server"])]) - -if test "x$with_server_java" != x; then - SERVER_JAVA="$with_server_java" - FOUND_VERSION=`$SERVER_JAVA -version 2>&1 | grep " version \""` - if test "x$FOUND_VERSION" = x; then - AC_MSG_ERROR([Could not execute server java: $SERVER_JAVA]) - fi -else - SERVER_JAVA="" - # Hotspot specific options. - ADD_JVM_ARG_IF_OK([-XX:+UseParallelOldGC],SERVER_JAVA,[$JAVA]) - ADD_JVM_ARG_IF_OK([-verbosegc],SERVER_JAVA,[$JAVA]) - # JRockit specific options. - ADD_JVM_ARG_IF_OK([-Xverbose:gc],SERVER_JAVA,[$JAVA]) - SERVER_JAVA="$JAVA $SERVER_JAVA" -fi -AC_SUBST(SERVER_JAVA) - -AC_MSG_CHECKING([whether to use shared server for javac]) -AC_ARG_ENABLE([javac-server], [AS_HELP_STRING([--enable-javac-server], - [enable the shared javac server during the build process @<:@disabled@:>@])], - [ENABLE_JAVAC_SERVER="${enableval}"], [ENABLE_JAVAC_SERVER='no']) -AC_MSG_RESULT([$ENABLE_JAVAC_SERVER]) -if test "x$ENABLE_JAVAC_SERVER" = xyes; then - JAVAC_USE_REMOTE=true - JAVAC_SERVERS="$OUTPUT_ROOT/javacservers" -else - JAVAC_USE_REMOTE=false - JAVAC_SERVERS= -fi -AC_SUBST(JAVAC_USE_REMOTE) -AC_SUBST(JAVAC_SERVERS) - -AC_ARG_WITH(javac-server-cores, [AS_HELP_STRING([--with-javac-server-cores], - [use at most this number of concurrent threads on the javac server @<:@probed@:>@])]) -if test "x$with_javac_server_cores" != x; then - JAVAC_SERVER_CORES="$with_javac_server_cores" -else - if test "$NUM_CORES" -gt 16; then - # We set this arbitrary limit because we want to limit the heap - # size of the javac server. - # In the future we will make the javac compilers in the server - # share more and more state, thus enabling us to use more and - # more concurrent threads in the server. - JAVAC_SERVER_CORES="16" - else - JAVAC_SERVER_CORES="$NUM_CORES" - fi - - if test "$MEMORY_SIZE" -gt "17000"; then - MAX_HEAP_MEM=10000 - ADD_JVM_ARG_IF_OK([-d64],SERVER_JAVA,[$SERVER_JAVA]) - ADD_JVM_ARG_IF_OK([-Xms10G -Xmx10G],SERVER_JAVA,[$SERVER_JAVA]) - ADD_JVM_ARG_IF_OK([-Xmn2G],SERVER_JAVA,[$SERVER_JAVA]) - elif test "$MEMORY_SIZE" -gt "10000"; then - MAX_HEAP_MEM=6000 - ADD_JVM_ARG_IF_OK([-d64],SERVER_JAVA,[$SERVER_JAVA]) - ADD_JVM_ARG_IF_OK([-Xms6G -Xmx6G],SERVER_JAVA,[$SERVER_JAVA]) - ADD_JVM_ARG_IF_OK([-Xmn1G],SERVER_JAVA,[$SERVER_JAVA]) - elif test "$MEMORY_SIZE" -gt "5000"; then - MAX_HEAP_MEM=3000 - ADD_JVM_ARG_IF_OK([-d64],SERVER_JAVA,[$SERVER_JAVA]) - ADD_JVM_ARG_IF_OK([-Xms1G -Xmx3G],SERVER_JAVA,[$SERVER_JAVA]) - ADD_JVM_ARG_IF_OK([-Xmn256M],SERVER_JAVA,[$SERVER_JAVA]) - elif test "$MEMORY_SIZE" -gt "3800"; then - MAX_HEAP_MEM=2500 - ADD_JVM_ARG_IF_OK([-Xms1G -Xmx2500M],SERVER_JAVA,[$SERVER_JAVA]) - ADD_JVM_ARG_IF_OK([-Xmn256M],SERVER_JAVA,[$SERVER_JAVA]) - elif test "$MEMORY_SIZE" -gt "1900"; then - MAX_HEAP_MEM=1200 - ADD_JVM_ARG_IF_OK([-Xms700M -Xmx1200M],SERVER_JAVA,[$SERVER_JAVA]) - ADD_JVM_ARG_IF_OK([-Xmn256M],SERVER_JAVA,[$SERVER_JAVA]) - elif test "$MEMORY_SIZE" -gt "1000"; then - MAX_HEAP_MEM=900 - ADD_JVM_ARG_IF_OK([-Xms400M -Xmx900M],SERVER_JAVA,[$SERVER_JAVA]) - ADD_JVM_ARG_IF_OK([-Xmn128M],SERVER_JAVA,[$SERVER_JAVA]) - else - MAX_HEAP_MEM=512 - ADD_JVM_ARG_IF_OK([-Xms256M -Xmx512M],SERVER_JAVA,[$SERVER_JAVA]) - ADD_JVM_ARG_IF_OK([-Xmn128M],SERVER_JAVA,[$SERVER_JAVA]) - fi - - MAX_COMPILERS_IN_HEAP=`expr $MAX_HEAP_MEM / 501` - if test "$JAVAC_SERVER_CORES" -gt "$MAX_COMPILERS_IN_HEAP"; then - AC_MSG_CHECKING([if number of server cores must be reduced]) - JAVAC_SERVER_CORES="$MAX_COMPILERS_IN_HEAP" - AC_MSG_RESULT([yes, to $JAVAC_SERVER_CORES with max heap size $MAX_HEAP_MEM MB]) - fi -fi -AC_SUBST(JAVAC_SERVER_CORES) - -AC_MSG_CHECKING([whether to track dependencies between Java packages]) -AC_ARG_ENABLE([javac-deps], [AS_HELP_STRING([--enable-javac-deps], - [enable the dependency tracking between Java packages @<:@disabled@:>@])], - [ENABLE_JAVAC_DEPS="${enableval}"], [ENABLE_JAVAC_DEPS='no']) -AC_MSG_RESULT([$ENABLE_JAVAC_DEPS]) -if test "x$ENABLE_JAVAC_DEPS" = xyes; then - JAVAC_USE_DEPS=true -else - JAVAC_USE_DEPS=false -fi -AC_SUBST(JAVAC_USE_DEPS) - -AC_MSG_CHECKING([whether to use multiple cores for javac compilation]) -AC_ARG_ENABLE([javac-multi-core], [AS_HELP_STRING([--enable-javac-multi-core], - [compile Java packages concurrently @<:@disabled@:>@])], - [ENABLE_JAVAC_MULTICORE="${enableval}"], [ENABLE_JAVAC_MULTICORE='no']) -AC_MSG_RESULT([$ENABLE_JAVAC_MULTICORE]) -if test "x$ENABLE_JAVAC_MULTICORE" = xyes; then - JAVAC_USE_MODE=MULTI_CORE_CONCURRENT -else - JAVAC_USE_MODE=SINGLE_THREADED_BATCH - if test "x$ENABLE_JAVAC_DEPS" = xyes; then - AC_MSG_WARN([Dependency tracking is not supported with single threaded batch compiles of Java source roots. Please add --disable-javac-deps to your configure options.]) - AC_MSG_WARN([Disabling dependency tracking for you now.]) - JAVAC_USE_DEPS=false - fi - if test "x$ENABLE_JAVAC_SERVER" = xyes; then - AC_MSG_WARN([The javac server will not be used since single threaded batch compiles are run within their own JVM. Please add --disable-javac-server to your configure options.]) - AC_MSG_WARN([Disabling javac server for you now.]) - JAVAC_USE_REMOTE=false - fi -fi -AC_SUBST(JAVAC_USE_MODE) - -############################################################################### -# -# OS specific settings that we never will need to probe. -# -if test "x$HOST_OS" = xlinux; then - AC_MSG_CHECKING([what is not needed on Linux?]) - PULSE_NOT_NEEDED=yes - AC_MSG_RESULT([pulse]) -fi - -if test "x$HOST_OS" = xsolaris; then - AC_MSG_CHECKING([what is not needed on Solaris?]) - ALSA_NOT_NEEDED=yes - PULSE_NOT_NEEDED=yes - AC_MSG_RESULT([alsa pulse]) -fi - -if test "x$HOST_OS" = xwindows; then - AC_MSG_CHECKING([what is not needed on Windows?]) - CUPS_NOT_NEEDED=yes - ALSA_NOT_NEEDED=yes - PULSE_NOT_NEEDED=yes - X11_NOT_NEEDED=yes - AC_MSG_RESULT([alsa cups pulse x11]) -fi - -if test "x$HOST_OS" = xmacosx; then - AC_MSG_CHECKING([what is not needed on MacOSX?]) - ALSA_NOT_NEEDED=yes - PULSE_NOT_NEEDED=yes - X11_NOT_NEEDED=yes - FREETYPE2_NOT_NEEDED=yes - # If the java runtime framework is disabled, then we need X11. - # This will be adjusted below. - AC_MSG_RESULT([alsa pulse x11]) -fi - -if test "x$HOST_OS" = xbsd; then - AC_MSG_CHECKING([what is not needed on bsd?]) - ALSA_NOT_NEEDED=yes - AC_MSG_RESULT([alsa]) -fi - -############################################################################### -# -# Check for MacOSX support for OpenJDK. If this exists, try to build a JVM -# that uses this API. -# -AC_ARG_ENABLE([macosx-runtime-support], [AS_HELP_STRING([--disable-macosx-runtime-support], - [disable the use of MacOSX Java runtime support framework @<:@enabled@:>@])], - [MACOSX_RUNTIME_SUPPORT="${enableval}"],[MACOSX_RUNTIME_SUPPORT="no"]) - -USE_MACOSX_RUNTIME_SUPPORT=no -AC_MSG_CHECKING([for explicit Java runtime support in the OS]) -if test -f /System/Library/Frameworks/JavaVM.framework/Frameworks/JavaRuntimeSupport.framework/Headers/JavaRuntimeSupport.h; then - if test "x$MACOSX_RUNTIME_SUPPORT" != xno; then - MACOSX_RUNTIME_SUPPORT=yes - USE_MACOSX_RUNTIME_SUPPORT=yes - AC_MSG_RESULT([yes, does not need alsa freetype2 pulse and X11]) - else - AC_MSG_RESULT([yes, but explicitly disabled.]) - fi -else - AC_MSG_RESULT([no]) -fi - -if test "x$HOST_OS" = xmacosx && test "x$USE_MACOSX_RUNTIME_SUPPORT" = xno; then - AC_MSG_CHECKING([what is not needed on an X11 build on MacOSX?]) - X11_NOT_NEEDED= - FREETYPE2_NOT_NEEDED= - AC_MSG_RESULT([alsa pulse]) -fi - -############################################################################### -# -# Check for X Windows -# -AC_PATH_XTRA - -if test "x$no_x" = xyes && test "x$X11_NOT_NEEDED" != xyes; then - help_on_build_dependency x11 - AC_MSG_ERROR([Could not find X11 libraries. $HELP_MSG]) -fi - -# Some of the old makefiles require a setting of OPENWIN_HOME -# Since the X11R6 directory has disappeared on later Linuxes, -# we need to probe for it. -if test "x$HOST_OS" = xlinux; then - if test -d "$SYS_ROOT/usr/X11R6"; then - OPENWIN_HOME="$SYS_ROOT/usr/X11R6" - fi - if test -d "$SYS_ROOT/usr/include/X11"; then - OPENWIN_HOME="$SYS_ROOT/usr" - fi -fi -if test "x$HOST_OS" = xsolaris; then - OPENWIN_HOME="/usr/openwin" -fi -AC_SUBST(OPENWIN_HOME) - - -# -# Weird Sol10 something check...TODO change to try compile -# -if test "x${HOST_OS}" = xsolaris; then - if test "`uname -r`" = "5.10"; then - if test "`${EGREP} -c XLinearGradient ${OPENWIN_HOME}/share/include/X11/extensions/Xrender.h`" = "0"; then - X_CFLAGS="${X_CFLAGS} -DSOLARIS10_NO_XRENDER_STRUCTS" - fi - fi -fi - -AC_LANG_PUSH(C) -OLD_CFLAGS="$CFLAGS" -CFLAGS="$CFLAGS $X_CFLAGS" -AC_CHECK_HEADERS([X11/extensions/shape.h X11/extensions/Xrender.h X11/extensions/XTest.h], - [X11_A_OK=yes], - [X11_A_OK=no]) -CFLAGS="$OLD_CFLAGS" -AC_LANG_POP(C) - -if test "x$X11_A_OK" = xno && test "x$X11_NOT_NEEDED" != xyes; then - help_on_build_dependency x11 - AC_MSG_ERROR([Could not find all X11 headers (shape.h Xrender.h XTest.h). $HELP_MSG]) -fi - -AC_SUBST(X_CFLAGS) -AC_SUBST(X_LIBS) - -############################################################################### -# -# The common unix printing system cups is used to print from java. -# -AC_ARG_WITH(cups, [AS_HELP_STRING([--with-cups], - [specify prefix directory for the cups package - (expecting the libraries under PATH/lib and the headers under PATH/include)])]) -AC_ARG_WITH(cups-include, [AS_HELP_STRING([--with-cups-include], - [specify directory for the cups include files])]) -AC_ARG_WITH(cups-lib, [AS_HELP_STRING([--with-cups-lib], - [specify directory for the cups library])]) - -if test "x$CUPS_NOT_NEEDED" = xyes; then - if test "x${with_cups}" != x || test "x${with_cups_include}" != x || test "x${with_cups_lib}" != x; then - AC_MSG_WARN([cups not used, so --with-cups is ignored]) - fi - CUPS_CFLAGS= - CUPS_LIBS= -else - CUPS_FOUND=no - - if test "x${with_cups}" = xno || test "x${with_cups_include}" = xno || test "x${with_cups_lib}" = xno; then - AC_MSG_ERROR([It is not possible to disable the use of cups. Remove the --without-cups option.]) - fi - - if test "x${with_cups}" != x; then - CUPS_LIBS="-L${with_cups}/lib -lcups" - CUPS_CFLAGS="-I${with_cups}/include" - CUPS_FOUND=yes - fi - if test "x${with_cups_include}" != x; then - CUPS_CFLAGS="-I${with_cups_include}" - CUPS_FOUND=yes - fi - if test "x${with_cups_lib}" != x; then - CUPS_LIBS="-L${with_cups_lib} -lcups" - CUPS_FOUND=yes - fi - if test "x$CUPS_FOUND" = xno; then - BDEPS_CHECK_MODULE(CUPS, cups, xxx, [CUPS_FOUND=yes]) - fi - if test "x$CUPS_FOUND" = xno; then - # Are the cups headers installed in the default /usr/include location? - AC_CHECK_HEADERS([cups/cups.h cups/ppd.h], - [CUPS_FOUND=yes - CUPS_CFLAGS= - CUPS_LIBS="-lcups" - DEFAULT_CUPS=yes]) - fi - if test "x$CUPS_FOUND" = xno; then - # Getting nervous now? Lets poke around for standard Solaris third-party - # package installation locations. - AC_MSG_CHECKING([for cups headers and libs]) - if test -s /opt/sfw/cups/include/cups/cups.h; then - # An SFW package seems to be installed! - CUPS_FOUND=yes - CUPS_CFLAGS="-I/opt/sfw/cups/include" - CUPS_LIBS="-L/opt/sfw/cups/lib -lcups" - elif test -s /opt/csw/include/cups/cups.h; then - # A CSW package seems to be installed! - CUPS_FOUND=yes - CUPS_CFLAGS="-I/opt/csw/include" - CUPS_LIBS="-L/opt/csw/lib -lcups" - fi - AC_MSG_RESULT([$CUPS_FOUND]) - fi - if test "x$CUPS_FOUND" = xno; then - help_on_build_dependency cups - AC_MSG_ERROR([Could not find cups! $HELP_MSG ]) - fi -fi - -AC_SUBST(CUPS_CFLAGS) -AC_SUBST(CUPS_LIBS) - -############################################################################### -# -# The ubiquitous freetype2 library is used to render fonts. -# -AC_ARG_WITH(freetype, [AS_HELP_STRING([--with-freetype], - [specify prefix directory for the freetype2 package - (expecting the libraries under PATH/lib and the headers under PATH/include)])]) - -# If we are using the OS installed system lib for freetype, then we do not need to copy it to the build tree -USING_SYSTEM_FT_LIB=false - -if test "x$FREETYPE2_NOT_NEEDED" = xyes; then - if test "x$with_freetype" != x || test "x$with_freetype_include" != x || test "x$with_freetype_lib" != x; then - AC_MSG_WARN([freetype not used, so --with-freetype is ignored]) - fi - FREETYPE2_CFLAGS= - FREETYPE2_LIBS= - FREETYPE2_LIB_PATH= -else - FREETYPE2_FOUND=no - - if test "x$with_freetype" != x; then - SPACESAFE(with_freetype,[the path to freetype]) - FREETYPE2_LIBS="-L$with_freetype/lib -lfreetype" - if test "x$HOST_OS" = xwindows; then - FREETYPE2_LIBS="$with_freetype/lib/freetype.lib" - fi - FREETYPE2_LIB_PATH="$with_freetype/lib" - FREETYPE2_CFLAGS="-I$with_freetype/include" - if test -s $with_freetype/include/ft2build.h && test -d $with_freetype/include/freetype2/freetype; then - FREETYPE2_CFLAGS="-I$with_freetype/include/freetype2 -I$with_freetype/include" - fi - FREETYPE2_FOUND=yes - if test "x$FREETYPE2_FOUND" = xyes; then - # Verify that the directories exist - if ! test -d "$with_freetype/lib" || ! test -d "$with_freetype/include"; then - AC_MSG_ERROR([Could not find the expected directories $with_freetype/lib and $with_freetype/include]) - fi - # List the contents of the lib. - FREETYPELIB=`ls $with_freetype/lib/libfreetype.so $with_freetype/lib/freetype.dll 2> /dev/null` - if test "x$FREETYPELIB" = x; then - AC_MSG_ERROR([Could not find libfreetype.se nor freetype.dll in $with_freetype/lib]) - fi - # Check one h-file - if ! test -s "$with_freetype/include/ft2build.h"; then - AC_MSG_ERROR([Could not find $with_freetype/include/ft2build.h]) - fi - fi - fi - if test "x$FREETYPE2_FOUND" = xno; then - BDEPS_CHECK_MODULE(FREETYPE2, freetype2, xxx, [FREETYPE2_FOUND=yes], [FREETYPE2_FOUND=no]) - USING_SYSTEM_FT_LIB=true - fi - if test "x$FREETYPE2_FOUND" = xno; then - PKG_CHECK_MODULES(FREETYPE2, freetype2, [FREETYPE2_FOUND=yes], [FREETYPE2_FOUND=no]) - USING_SYSTEM_FT_LIB=true - fi - if test "x$FREETYPE2_FOUND" = xno; then - AC_MSG_CHECKING([for freetype in some standard locations]) - - if test -s /usr/X11/include/ft2build.h && test -d /usr/X11/include/freetype2/freetype; then - DEFAULT_FREETYPE_CFLAGS="-I/usr/X11/include/freetype2 -I/usr/X11/include" - DEFAULT_FREETYPE_LIBS="-L/usr/X11/lib -lfreetype" - fi - if test -s /usr/include/ft2build.h && test -d /usr/include/freetype2/freetype; then - DEFAULT_FREETYPE_CFLAGS="-I/usr/include/freetype2" - DEFAULT_FREETYPE_LIBS="-lfreetype" - fi - - PREV_CXXCFLAGS="$CXXFLAGS" - PREV_LDFLAGS="$LDFLAGS" - CXXFLAGS="$CXXFLAGS $DEFAULT_FREETYPE_CFLAGS" - LDFLAGS="$LDFLAGS $DEFAULT_FREETYPE_LIBS" - AC_LINK_IFELSE([AC_LANG_SOURCE([[#include - #include FT_FREETYPE_H - int main() { return 0; } - ]])], - [ - # Yes, the default cflags and libs did the trick. - FREETYPE2_FOUND=yes - FREETYPE2_CFLAGS="$DEFAULT_FREETYPE_CFLAGS" - FREETYPE2_LIBS="$DEFAULT_FREETYPE_LIBS" - ], - [ - FREETYPE2_FOUND=no - ]) - CXXCFLAGS="$PREV_CXXFLAGS" - LDFLAGS="$PREV_LDFLAGS" - AC_MSG_RESULT([$FREETYPE2_FOUND]) - USING_SYSTEM_FT_LIB=true - fi - if test "x$FREETYPE2_FOUND" = xno; then - help_on_build_dependency freetype2 - AC_MSG_ERROR([Could not find freetype2! $HELP_MSG ]) - fi -fi - -AC_SUBST(USING_SYSTEM_FT_LIB) -AC_SUBST(FREETYPE2_LIB_PATH) -AC_SUBST(FREETYPE2_CFLAGS) -AC_SUBST(FREETYPE2_LIBS) - -############################################################################### -# -# Check for alsa headers and libraries. Used on Linux/GNU systems. -# -AC_ARG_WITH(alsa, [AS_HELP_STRING([--with-alsa], - [specify prefix directory for the alsa package - (expecting the libraries under PATH/lib and the headers under PATH/include)])]) -AC_ARG_WITH(alsa-include, [AS_HELP_STRING([--with-alsa-include], - [specify directory for the alsa include files])]) -AC_ARG_WITH(alsa-lib, [AS_HELP_STRING([--with-alsa-lib], - [specify directory for the alsa library])]) - -if test "x$ALSA_NOT_NEEDED" = xyes; then - if test "x${with_alsa}" != x || test "x${with_alsa_include}" != x || test "x${with_alsa_lib}" != x; then - AC_MSG_WARN([alsa not used, so --with-alsa is ignored]) - fi - ALSA_CFLAGS= - ALSA_LIBS= -else - ALSA_FOUND=no - - if test "x${with_alsa}" = xno || test "x${with_alsa_include}" = xno || test "x${with_alsa_lib}" = xno; then - AC_MSG_ERROR([It is not possible to disable the use of alsa. Remove the --without-alsa option.]) - fi - - if test "x${with_alsa}" != x; then - ALSA_LIBS="-L${with_alsa}/lib -lalsa" - ALSA_CFLAGS="-I${with_alsa}/include" - ALSA_FOUND=yes - fi - if test "x${with_alsa_include}" != x; then - ALSA_CFLAGS="-I${with_alsa_include}" - ALSA_FOUND=yes - fi - if test "x${with_alsa_lib}" != x; then - ALSA_LIBS="-L${with_alsa_lib} -lalsa" - ALSA_FOUND=yes - fi - if test "x$ALSA_FOUND" = xno; then - BDEPS_CHECK_MODULE(ALSA, alsa, xxx, [ALSA_FOUND=yes], [ALSA_FOUND=no]) - fi - if test "x$ALSA_FOUND" = xno; then - PKG_CHECK_MODULES(ALSA, alsa, [ALSA_FOUND=yes], [ALSA_FOUND=no]) - fi - if test "x$ALSA_FOUND" = xno; then - AC_CHECK_HEADERS([alsa/asoundlib.h], - [ALSA_FOUND=yes - ALSA_CFLAGS=-Iignoreme - ALSA_LIBS=-lasound - DEFAULT_ALSA=yes], - [ALSA_FOUND=no]) - fi - if test "x$ALSA_FOUND" = xno; then - help_on_build_dependency alsa - AC_MSG_ERROR([Could not find alsa! $HELP_MSG ]) - fi -fi - -AC_SUBST(ALSA_CFLAGS) -AC_SUBST(ALSA_LIBS) - -############################################################################### -# -# Check for pulse audio headers and libraries. -# -PULSE_FOUND=no -AC_ARG_WITH(pulse, [AS_HELP_STRING([--with-pulse], - [specify prefix directory for the pulseaudio package - (expecting the libraries under PATH/lib and the headers under PATH/include)])]) -AC_ARG_WITH(pulse-include, [AS_HELP_STRING([--with-pulse-include], - [specify directory for the pulseaudio include files])]) -AC_ARG_WITH(pulse-lib, [AS_HELP_STRING([--with-pulse-lib], - [specify directory for the pulseaudio library])]) - -if test "x${with_pulse}" != x; then - PULSE_LIBS="-L${with_pulse}/lib -lfreetype" - PULSE_CFLAGS="-I${with_pulse}/include" - PULSE_FOUND=yes -fi -if test "x${with_pulse_include}" != x; then - PULSE_CFLAGS="-I${with_pulse_include}" - PULSE_FOUND=yes -fi -if test "x${with_pulse_lib}" != x; then - PULSE_LIBS="-L${with_pulse_lib} -lpulse" - PULSE_FOUND=yes -fi -if test "x$PULSE_FOUND" = xno; then - BDEPS_CHECK_MODULE(PULSE, pulse, xxx, [PULSE_FOUND=yes], [PULSE_FOUND=no]) -fi -if test "x$PULSE_FOUND" = xno; then - PKG_CHECK_MODULES(LIBPULSE,[libpulse >= 0.9.11],[PULSE_FOUND=yes],[PULSE_FOUND=no]) -fi -if test "x$PULSE_FOUND" = xno; then - AC_CHECK_HEADERS([pulse/pulseaudio.h], - [PULSE_FOUND=yes - PULSE_CFLAGS=-Iignoreme - PULSE_LIBS= - DEFAULT_PULSE=yes], - [PULSE_FOUND=no]) -fi - -if test "x$PULSE_FOUND" = xno && test "x$PULSE_NOT_NEEDED" != xyes; then - help_on_build_dependency pulse - AC_MSG_ERROR([Could not find pulse audio libraries. $HELP_MSG ]) -fi - -AC_SUBST(PULSE_CFLAGS) -AC_SUBST(PULSE_LIBS) - -############################################################################### -# -# Check for the jpeg library -# - -USE_EXTERNAL_LIBJPEG=true -AC_CHECK_LIB(jpeg, main, [], - [ USE_EXTERNAL_LIBJPEG=false - AC_MSG_NOTICE([Will use jpeg decoder bundled with the OpenJDK source]) - ]) -AC_SUBST(USE_EXTERNAL_LIBJPEG) - -############################################################################### -# -# Check for the gif library -# - -USE_EXTERNAL_LIBJPEG=true -AC_CHECK_LIB(gif, main, [], - [ USE_EXTERNAL_LIBGIF=false - AC_MSG_NOTICE([Will use gif decoder bundled with the OpenJDK source]) - ]) -AC_SUBST(USE_EXTERNAL_LIBGIF) - -############################################################################### -# -# Check for the zlib library -# - -USE_EXTERNAL_LIBZ=true -AC_CHECK_LIB(z, main, [], - [ USE_EXTERNAL_LIBZ=false - AC_MSG_NOTICE([Will use zlib bundled with the OpenJDK source]) - ]) -AC_SUBST(USE_EXTERNAL_LIBZ) - -############################################################################### -# -# Check if altzone exists in time.h -# - -AC_LINK_IFELSE([AC_LANG_PROGRAM([#include ], [return (int)altzone;])], - [has_altzone=yes], - [has_altzone=no]) -if test "x$has_altzone" = xyes; then - AC_DEFINE([HAVE_ALTZONE], 1, [Define if you have the external 'altzone' variable in time.h]) -fi - -############################################################################### -# -# Check the maths library -# - -AC_CHECK_LIB(m, cos, [], - [ - AC_MSG_NOTICE([Maths library was not found]) - ]) -AC_SUBST(LIBM) - -############################################################################### -# -# Check for libdl.so - -save_LIBS="$LIBS" -LIBS="" -AC_CHECK_LIB(dl,dlopen) -LIBDL="$LIBS" -AC_SUBST(LIBDL) -LIBS="$save_LIBS" - -############################################################################### -# -# Should we run the painfully slow javadoc tool? -# -AC_MSG_CHECKING([whether to build documentation]) -AC_ARG_ENABLE([docs], [AS_HELP_STRING([--enable-docs], - [enable generation of Javadoc documentation @<:@disabled@:>@])], - [ENABLE_DOCS="${enableval}"], [ENABLE_DOCS='no']) -AC_MSG_RESULT([$ENABLE_DOCS]) -AC_SUBST(ENABLE_DOCS) -GENERATE_DOCS=false -if test "x$ENABLE_DOCS" = xyes; then - GENERATE_DOCS=true -fi -AC_SUBST(GENERATE_DOCS) - -############################################################################### -# -# Should we compile nimbus swing L&F? We can probably remove this option -# since nimbus is officially part of javax now. -# -AC_MSG_CHECKING([whether to build nimbus L&F]) -AC_ARG_ENABLE([nimbus], [AS_HELP_STRING([--disable-nimbus], - [disable Nimbus L&F @<:@enabled@:>@])], - [ENABLE_NIMBUS="${enableval}"], [ENABLE_NIMBUS='yes']) -AC_MSG_RESULT([$ENABLE_NIMBUS]) -DISABLE_NIMBUS= -if test "x$ENABLE_NIMBUS" = xno; then - DISABLE_NIMBUS=true -fi -AC_SUBST(DISABLE_NIMBUS) - -############################################################################### -# -# Setup the opt flags for different compilers -# and different operating systems. -# -C_FLAG_DEPS="-MMD -MF" -CXX_FLAG_DEPS="-MMD -MF" - -case $COMPILER_TYPE in - CC ) - D_FLAG="-g" - case $COMPILER_NAME in - gcc ) - case $PLATFORM in - macosx ) - # On MacOSX we optimize for size, something - # we should do for all platforms? - C_O_FLAG_HI="-Os" - C_O_FLAG_NORM="-Os" - C_O_FLAG_NONE="" - ;; - *) - C_O_FLAG_HI="-O3" - C_O_FLAG_NORM="-O2" - C_O_FLAG_NONE="-O0" - ;; - esac - CXX_O_FLAG_HI="$C_O_FLAG_HI" - CXX_O_FLAG_NORM="$C_O_FLAG_NORM" - CXX_O_FLAG_NONE="$C_O_FLAG_NONE" - ;; - ossc ) - # - # Forte has different names for this with their C++ compiler... - # - CXX_FLAG_DEPS="-xMMD -xMF" - -# Extra options used with HIGHEST -# -# WARNING: Use of OPTIMIZATION_LEVEL=HIGHEST in your Makefile needs to be -# done with care, there are some assumptions below that need to -# be understood about the use of pointers, and IEEE behavior. -# -# Use non-standard floating point mode (not IEEE 754) -CC_HIGHEST="$CC_HIGHEST -fns" -# Do some simplification of floating point arithmetic (not IEEE 754) -CC_HIGHEST="$CC_HIGHEST -fsimple" -# Use single precision floating point with 'float' -CC_HIGHEST="$CC_HIGHEST -fsingle" -# Assume memory references via basic pointer types do not alias -# (Source with excessing pointer casting and data access with mixed -# pointer types are not recommended) -CC_HIGHEST="$CC_HIGHEST -xalias_level=basic" -# Use intrinsic or inline versions for math/std functions -# (If you expect perfect errno behavior, do not use this) -CC_HIGHEST="$CC_HIGHEST -xbuiltin=%all" -# Loop data dependency optimizations (need -xO3 or higher) -CC_HIGHEST="$CC_HIGHEST -xdepend" -# Pointer parameters to functions do not overlap -# (Similar to -xalias_level=basic usage, but less obvious sometimes. -# If you pass in multiple pointers to the same data, do not use this) -CC_HIGHEST="$CC_HIGHEST -xrestrict" -# Inline some library routines -# (If you expect perfect errno behavior, do not use this) -CC_HIGHEST="$CC_HIGHEST -xlibmil" -# Use optimized math routines -# (If you expect perfect errno behavior, do not use this) -# Can cause undefined external on Solaris 8 X86 on __sincos, removing for now -#CC_HIGHEST="$CC_HIGHEST -xlibmopt" - - case $LEGACY_HOST_CPU1 in - i586) - C_O_FLAG_HIGHEST="-xO4 -Wu,-O4~yz $CC_HIGHEST -xchip=pentium" - C_O_FLAG_HI="-xO4 -Wu,-O4~yz" - C_O_FLAG_NORM="-xO2 -Wu,-O2~yz" - C_O_FLAG_NONE="" - CXX_O_FLAG_HIGHEST="-xO4 -Qoption ube -O4~yz $CC_HIGHEST -xchip=pentium" - CXX_O_FLAG_HI="-xO4 -Qoption ube -O4~yz" - CXX_O_FLAG_NORM="-xO2 -Qoption ube -O2~yz" - CXX_O_FLAG_NONE="" - ;; - sparc) - C_O_FLAG_HIGHEST="-xO4 -Wc,-Qrm-s -Wc,-Qiselect-T0 $CC_HIGHEST -xprefetch=auto,explicit -xchip=ultra" - C_O_FLAG_HI="-xO4 -Wc,-Qrm-s -Wc,-Qiselect-T0" - C_O_FLAG_NORM="-xO2 -Wc,-Qrm-s -Wc,-Qiselect-T0" - C_O_FLAG_NONE="" - CXX_O_FLAG_HIGHEST="-xO4 -Qoption cg -Qrm-s -Qoption cg -Qiselect-T0 $CC_HIGHEST -xprefetch=auto,explicit -xchip=ultra" - CXX_O_FLAG_HI="-xO4 -Qoption cg -Qrm-s -Qoption cg -Qiselect-T0" - CXX_O_FLAG_NORM="-xO2 -Qoption cg -Qrm-s -Qoption cg -Qiselect-T0" - CXX_O_FLAG_NONE="" - ;; - esac - esac - ;; - CL ) - D_FLAG= - C_O_FLAG_HI="-O2" - C_O_FLAG_NORM="-O1" - C_O_FLAG_NONE="-Od" - CXX_O_FLAG_HI="$C_O_FLAG_HI" - CXX_O_FLAG_NORM="$C_O_FLAG_NORM" - CXX_O_FLAG_NONE="$C_O_FLAG_NONE" - ;; -esac - -if test -z "$C_O_FLAG_HIGHEST"; then - C_O_FLAG_HIGHEST="$C_O_FLAG_HI" -fi - -if test -z "$CXX_O_FLAG_HIGHEST"; then - CXX_O_FLAG_HIGHEST="$CXX_O_FLAG_HI" -fi - -AC_SUBST(C_O_FLAG_HIGHEST) -AC_SUBST(C_O_FLAG_HI) -AC_SUBST(C_O_FLAG_NORM) -AC_SUBST(C_O_FLAG_NONE) -AC_SUBST(CXX_O_FLAG_HIGHEST) -AC_SUBST(CXX_O_FLAG_HI) -AC_SUBST(CXX_O_FLAG_NORM) -AC_SUBST(CXX_O_FLAG_NONE) -AC_SUBST(C_FLAG_DEPS) -AC_SUBST(CXX_FLAG_DEPS) - -############################################################################### -# -# Setup legacy vars/targets and new vars to deal with different debug levels. -# -case $DEBUG_LEVEL in - release ) - HOTSPOT_DEBUG_LEVEL="product" - HOTSPOT_EXPORT="product" - ;; - fastdebug ) - HOTSPOT_DEBUG_LEVEL="fastdebug" - HOTSPOT_EXPORT="fastdebug" - CFLAGS="$CFLAGS $D_FLAG" - JAVAC_FLAGS="$JAVAC_FLAGS -g" - ;; - slowdebug ) - HOTSPOT_DEBUG_LEVEL="jvmg" - HOTSPOT_EXPORT="debug" - CFLAGS="$CFLAGS $D_FLAG" - C_O_FLAG_HI="$C_O_FLAG_NONE" - C_O_FLAG_NORM="$C_O_FLAG_NONE" - CXX_O_FLAG_HI="$CXX_O_FLAG_NONE" - CXX_O_FLAG_NORM="$CXX_O_FLAG_NONE" - JAVAC_FLAGS="$JAVAC_FLAGS -g" - ;; -esac - -############################################################################### -# -# Generate the legacy makefile targets for hotspot. -# The hotspot api for selecting the build artifacts, really, needs to be improved. -# -HOTSPOT_TARGET="" - -if test "x$JVM_VARIANT_SERVER" = xtrue; then - HOTSPOT_TARGET="$HOTSPOT_TARGET${HOTSPOT_DEBUG_LEVEL} " -fi - -if test "x$JVM_VARIANT_CLIENT" = xtrue; then - HOTSPOT_TARGET="$HOTSPOT_TARGET${HOTSPOT_DEBUG_LEVEL}1 " -fi - -if test "x$JVM_VARIANT_KERNEL" = xtrue; then - HOTSPOT_TARGET="$HOTSPOT_TARGET${HOTSPOT_DEBUG_LEVEL}kernel " -fi - -if test "x$JVM_VARIANT_ZERO" = xtrue; then - HOTSPOT_TARGET="$HOTSPOT_TARGET${HOTSPOT_DEBUG_LEVEL}zero " -fi - -if test "x$JVM_VARIANT_ZEROSHARK" = xtrue; then - HOTSPOT_TARGET="$HOTSPOT_TARGET${HOTSPOT_DEBUG_LEVEL}shark " -fi - -HOTSPOT_TARGET="$HOTSPOT_TARGET docs export_$HOTSPOT_EXPORT" - -############################################################################### -# -# Setup all directories for the subrepoes and the arguments to the sub makes. -# -LANGTOOLS_OUTPUTDIR="$OUTPUT_ROOT/langtools" -LANGTOOLS_DIST="$OUTPUT_ROOT/langtools/dist" -LANGTOOLS_MAKE_ARGS="" -AC_SUBST(LANGTOOLS_OUTPUTDIR) -AC_SUBST(LANGTOOLS_DIST) -AC_SUBST(LANGTOOLS_MAKE_ARGS) - -CORBA_OUTPUTDIR="$OUTPUT_ROOT/corba" -CORBA_DIST="$OUTPUT_ROOT/corba/dist" -CORBA_MAKE_ARGS="" -AC_SUBST(CORBA_OUTPUTDIR) -AC_SUBST(CORBA_DIST) -AC_SUBST(CORBA_MAKE_ARGS) - -JAXP_OUTPUTDIR="$OUTPUT_ROOT/jaxp" -JAXP_DIST="$OUTPUT_ROOT/jaxp/dist" -JAXP_MAKE_ARGS="" -AC_SUBST(JAXP_OUTPUTDIR) -AC_SUBST(JAXP_DIST) -AC_SUBST(JAXP_MAKE_ARGS) - -JAXWS_OUTPUTDIR="$OUTPUT_ROOT/jaxws" -JAXWS_DIST="$OUTPUT_ROOT/jaxws/dist" -JAXWS_MAKE_ARGS="" -AC_SUBST(JAXWS_OUTPUTDIR) -AC_SUBST(JAXWS_DIST) -AC_SUBST(JAXWS_MAKE_ARGS) - -HOTSPOT_OUTPUTDIR="$OUTPUT_ROOT/hotspot" -HOTSPOT_DIST="$OUTPUT_ROOT/hotspot/dist" -HOTSPOT_MAKE_ARGS="ALT_OUTPUTDIR=$HOTSPOT_OUTPUTDIR ALT_EXPORT_PATH=$HOTSPOT_DIST $HOTSPOT_TARGET" -AC_SUBST(HOTSPOT_OUTPUTDIR) -AC_SUBST(HOTSPOT_DIST) -AC_SUBST(HOTSPOT_MAKE_ARGS) - -JDK_OUTPUTDIR="$OUTPUT_ROOT/jdk" -JDK_MAKE_ARGS="ALT_OUTPUTDIR=\"$OUTPUT_ROOT/jdk\"" -AC_SUBST(JDK_OUTPUTDIR) -AC_SUBST(JDK_MAKE_ARGS) - -IMAGES_OUTPUTDIR=$OUTPUT_ROOT/images -IMAGES_MAKE_ARGS="ALT_OUTPUTDIR=$OUTPUT_ROOT/jdk \ - SHARE_SRC=$JDK_TOPDIR/src/share \ - PLATFORM_SRC=$JDK_TOPDIR/src/$LEGACY_HOST_OS_API \ - TEMPDIR=$IMAGES_OUTPUTDIR/tmp \ - ABS_TEMPDIR=$IMAGES_OUTPUTDIR/tmp " -AC_SUBST(IMAGES_OUTPUTDIR) -AC_SUBST(IMAGES_MAKE_ARGS) - -############################################################################### -# -# Now setup the CFLAGS and LDFLAGS for the JDK build. -# Later we will also have CFLAGS and LDFLAGS for the hotspot subrepo build. -# -case $COMPILER_NAME in - gcc ) - CCXXFLAGS_JDK="$CCXXFLAGS $CCXXFLAGS_JDK -W -Wall -Wno-unused -Wno-parentheses \ - -pipe -fno-omit-frame-pointer \ - -D_GNU_SOURCE -D_REENTRANT -D_LARGEFILE64_SOURCE" - CFLAGS_JDK="$CFLAGS_JDK -fno-strict-aliasing" - ;; - ossc ) - CFLAGS_JDK="$CFLAGS_JDK -xc99=%none -xCC -errshort=tags -Xa -v -mt -norunpath -xnolib" - CXXFLAGS_JDK="$CXXFLAGS_JDK -errtags=yes +w -mt -features=no%except -DCC_NOEX" - ;; - cl ) - CCXXFLAGS_JDK="$CCXXFLAGS $CCXXFLAGS_JDK -Zi -MD -Zc:wchar_t- -W3 -wd4800 \ - -D_STATIC_CPPLIB -D_DISABLE_DEPRECATE_STATIC_CPPLIB -DWIN32_LEAN_AND_MEAN \ - -D_CRT_SECURE_NO_DEPRECATE -D_CRT_NONSTDC_NO_DEPRECATE \ - -DWIN32 -DIAL" - case $LEGACY_HOST_CPU1 in - i?86 ) - CCXXFLAGS_JDK="$CCXXFLAGS_JDK -D_X86_ -Dx86" - ;; - amd64 ) - CCXXFLAGS_JDK="$CCXXFLAGS_JDK -D_AMD64_ -Damd64" - ;; - esac - ;; -esac - -CCXXFLAGS_JDK="$CCXXFLAGS_JDK $ADD_LP64" - -# The package path is used only on macosx? -PACKAGE_PATH=/opt/local -AC_SUBST(PACKAGE_PATH) - -# Sometimes we use a cpu dir (.../lib/amd64/server) -# Sometimes not (.../lib/server) -LIBARCHDIR="$LEGACY_HOST_CPU2/" -if test "x$ENDIAN" = xlittle; then - CCXXFLAGS_JDK="$CCXXFLAGS_JDK -D_LITTLE_ENDIAN" -else - CCXXFLAGS_JDK="$CCXXFLAGS_JDK -D_BIG_ENDIAN" -fi -if test "x$HOST_OS" = xlinux; then - CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DLINUX" -fi -if test "x$HOST_OS" = xwindows; then - CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DWINDOWS" -fi -if test "x$HOST_OS" = xsolaris; then - CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DSOLARIS" -fi -if test "x$HOST_OS" = xmacosx; then - CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DMACOSX -D_ALLBSD_SOURCE" - LIBARCHDIR="" -fi -if test "x$HOST_OS" = xbsd; then - CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DBSD -D_ALLBSD_SOURCE" -fi -if test "x$DEBUG_LEVEL" = xrelease; then - CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DNDEBUG" -else - CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DDEBUG" -fi - -CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DARCH='\"$LEGACY_HOST_CPU1\"' -D$LEGACY_HOST_CPU1" -CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DRELEASE='\"$RELEASE\"'" - -CCXXFLAGS_JDK="$CCXXFLAGS_JDK \ - -I${JDK_OUTPUTDIR}/include \ - -I${JDK_OUTPUTDIR}/include/$PLATFORM \ - -I${JDK_TOPDIR}/src/share/javavm/export \ - -I${JDK_TOPDIR}/src/$LEGACY_HOST_OS_API/javavm/export \ - -I${JDK_TOPDIR}/src/share/native/common \ - -I${JDK_TOPDIR}/src/$LEGACY_HOST_OS_API/native/common" - -# The shared libraries are compiled using the picflag. -CFLAGS_JDKLIB="$CCXXFLAGS_JDK $CFLAGS_JDK $PICFLAG $CFLAGS_JDKLIB_EXTRA" -CXXFLAGS_JDKLIB="$CCXXFLAGS_JDK $CXXFLAGS_JDK $PICFLAG" - -# Executable flags -CFLAGS_JDKEXE="$CCXXFLAGS_JDK $CFLAGS_JDK" -CXXFLAGS_JDKEXE="$CCXXFLAGS_JDK $CXXFLAGS_JDK" - -# Now this is odd. The JDK native libraries have to link against libjvm.so -# On 32-bit machines there is normally two distinct libjvm.so:s, client and server. -# Which should we link to? Are we lucky enough that the binary api to the libjvm.so library -# is identical for client and server? Yes. Which is picked at runtime (client or server)? -# Neither, since the chosen libjvm.so has already been loaded by the launcher, all the following -# libraries will link to whatever is in memory. Yuck. -# -# Thus we offer the compiler to find libjvm.so first in server then in client. It works. Ugh. -if test "x$COMPILER_TYPE" = xCL; then - LDFLAGS_JDKLIB="$LDFLAGS -dll -libpath:${JDK_OUTPUTDIR}/lib -libpath:${JDK_OUTPUTDIR}/objs" - LDFLAGS_JDKLIB_SUFFIX="" - if test "$HOST_CPU_BITS" == "64"; then - LDFLAGS_STACK_SIZE=1048576 - else - LDFLAGS_STACK_SIZE=327680 - fi - LDFLAGS_JDKEXE="$LDFLAGS /STACK:$LDFLAGS_STACK_SIZE" -else - # If this is a --hash-style=gnu system, use --hash-style=both, why? - HAS_GNU_HASH=`$CC -dumpspecs 2>/dev/null | $GREP 'hash-style=gnu'` - if test -n "$HAS_GNU_HASH"; then - # And since we now know that the linker is gnu, then add -z defs, to forbid - # undefined symbols in object files. - LDFLAGS="$LDFLAGS -Xlinker --hash-style=both -Xlinker -z -Xlinker defs" - if test "x$DEBUG_LEVEL" == "xrelease"; then - # When building release libraries, tell the linker optimize them. - # Should this be supplied to the OSS linker as well? - LDFLAGS="$LDFLAGS -Xlinker -O1" - fi - fi - - LDFLAGS_JDKLIB="$LDFLAGS $SHARED_LIBRARY_FLAGS \ - -L${JDK_OUTPUTDIR}/objs \ - -L${JDK_OUTPUTDIR}/lib/${LIBARCHDIR}server \ - -L${JDK_OUTPUTDIR}/lib/${LIBARCHDIR}client \ - -L${JDK_OUTPUTDIR}/lib/${LIBARCHDIR}" - LDFLAGS_JDKLIB_SUFFIX="-ljvm -ljava" - if test "x$COMPILER_NAME" = xossc; then - LDFLAGS_JDKLIB_SUFFIX="$LDFLAGS_JDKLIB_SUFFIX -lc" - fi - - # Only the jli library is explicitly linked when the launchers are built. - # The libjvm is then dynamically loaded/linked by the launcher. - if test "x$HOST_OS" != "xmacosx"; then - LDFLAGS_JDKEXE="$LDFLAGS -L${JDK_OUTPUTDIR}/lib/${LIBARCHDIR}jli" - LDFLAGS_JDKEXE_SUFFIX="-ljli" - fi -fi - - -AC_SUBST(CFLAGS_JDKLIB) -AC_SUBST(CFLAGS_JDKEXE) - -AC_SUBST(CXXFLAGS_JDKLIB) -AC_SUBST(CXXFLAGS_JDKEXE) - -AC_SUBST(LDFLAGS_JDKLIB) -AC_SUBST(LDFLAGS_JDKEXE) -AC_SUBST(LDFLAGS_JDKLIB_SUFFIX) -AC_SUBST(LDFLAGS_JDKEXE_SUFFIX) - - -############################################################################### -# -# statically link libstdc++ before C++ ABI is stablized on Linux unless -# dynamic build is configured on command line. -# -AC_ARG_ENABLE([static-link-stdc++], [AS_HELP_STRING([--disable-static-link-stdc++], - [disable static linking of the C++ runtime on Linux @<:@enabled@:>@])],, - [ - enable_static_link_stdc__=yes - ]) - -if test "x$HOST_OS" = xlinux; then - # Test if -lstdc++ works. - AC_MSG_CHECKING([if dynamic link of stdc++ is possible]) - AC_LANG_PUSH(C++) - OLD_CXXFLAGS="$CXXFLAGS" - CXXFLAGS="$CXXFLAGS -lstdc++" - AC_LINK_IFELSE([AC_LANG_PROGRAM([], [return 0;])], - [has_dynamic_libstdcxx=yes], - [has_dynamic_libstdcxx=no]) - CXXFLAGS="$OLD_CXXFLAGS" - AC_LANG_POP(C++) - AC_MSG_RESULT([$has_dynamic_libstdcxx]) - - # Test if stdc++ can be linked statically. - AC_MSG_CHECKING([if static link of stdc++ is possible]) - STATIC_STDCXX_FLAGS="-Wl,-Bstatic -lstdc++ -lgcc -Wl,-Bdynamic" - AC_LANG_PUSH(C++) - OLD_LIBS="$LIBS" - OLD_CXX="$CXX" - LIBS="$STATIC_STDCXX_FLAGS" - CXX="$CC" - AC_LINK_IFELSE([AC_LANG_PROGRAM([], [return 0;])], - [has_static_libstdcxx=yes], - [has_static_libstdcxx=no]) - LIBS="$OLD_LIBS" - CXX="$OLD_CXX" - AC_LANG_POP(C++) - AC_MSG_RESULT([$has_static_libstdcxx]) - - if test "x$has_static_libcxx" = xno && test "x$has_dynamic_libcxx" = xno; then - AC_MSG_ERROR([I cannot link to stdc++! Neither dynamically nor statically.]) - fi - - if test "x$enable_static_link_stdc__" = xyes && test "x$has_static_libstdcxx" = xno; then - AC_MSG_NOTICE([Static linking of libstdc++ was not possible reverting to dynamic linking.]) - enable_static_link_stdc__=no - fi - - if test "x$enable_static_link_stdc__" = xno && test "x$has_dynamic_libstdcxx" = xno; then - AC_MSG_NOTICE([Dynamic linking of libstdc++ was not possible reverting to static linking.]) - enable_static_link_stdc__=yes - fi - - AC_MSG_CHECKING([how to link with libstdc++]) - if test "x$enable_static_link_stdc__" = xyes; then - LIBCXX="$LIBCXX $STATIC_STDCXX_FLAGS" - LDCXX="$CC" - AC_MSG_RESULT([static]) - else - LIBCXX="$LIBCXX -lstdc++" - LDCXX="$CXX" - AC_MSG_RESULT([dynamic]) - fi -fi - -############################################################################### -# -# Could someone enlighten this configure script with a comment about libCrun? -# The LEGACY_HOST_CPU3 is the setting for ISA_DIR. -# -if test "x$HOST_OS" = xsolaris && test "x$LIBCXX" = x; then - LIBCXX="/usr/lib${LEGACY_HOST_CPU3}/libCrun.so.1" -fi - -# TODO better (platform agnostic) test -if test "x$HOST_OS" = xmacosx && test "x$LIBCXX" = x && test "x$GCC" = xyes; then - LIBCXX="-lstdc++" -fi - -AC_SUBST(LIBCXX) - -############################################################################### - -OS_VERSION="`uname -r | ${SED} 's!\.! !g' | ${SED} 's!-! !g'`" -OS_VERSION_MAJOR="`${ECHO} ${OS_VERSION} | ${CUT} -f 1 -d ' '`" -OS_VERSION_MINOR="`${ECHO} ${OS_VERSION} | ${CUT} -f 2 -d ' '`" -OS_VERSION_MICRO="`${ECHO} ${OS_VERSION} | ${CUT} -f 3 -d ' '`" -AC_SUBST(OS_VERSION_MAJOR) -AC_SUBST(OS_VERSION_MINOR) -AC_SUBST(OS_VERSION_MICRO) - -############################################################################### -# -# Misc -# - -# The name of the Service Agent jar. -SALIB_NAME="${LIBRARY_PREFIX}saproc${SHARED_LIBRARY_SUFFIX}" -if test "x$HOST_OS" = "xwindows"; then - SALIB_NAME="${LIBRARY_PREFIX}sawindbg${SHARED_LIBRARY_SUFFIX}" -fi -AC_SUBST(SALIB_NAME) - -# Control wether Hotspot runs Queens test after build. -AC_ARG_ENABLE([hotspot-test-in-build], [AS_HELP_STRING([--enable-hotspot-test-in-build], - [enable running of Queens test after Hotspot build (not yet available) @<:@disabled@:>@])],, - [enable_hotspot_test_in_build=no]) -if test "x$enable_hotspot_test_in_build" = "xyes"; then - TEST_IN_BUILD=true -else - TEST_IN_BUILD=false -fi -AC_SUBST(TEST_IN_BUILD) - -############################################################################### -# -# Choose cacerts source file -# -AC_ARG_WITH(cacerts-file, [AS_HELP_STRING([--with-cacerts-file], - [specify alternative cacerts file])]) -if test "x$with_cacerts_file" != x; then - CACERTS_FILE=$with_cacerts_file -else - if test "x$OPENJDK" = "xtrue"; then - CACERTS_FILE=${SRC_ROOT}/jdk/src/share/lib/security/cacerts - else - CACERTS_FILE=${SRC_ROOT}/jdk/src/closed/share/lib/security/cacerts.internal - fi -fi -AC_SUBST(CACERTS_FILE) - -# Check if build directory is on local disk. -# return 0 if it is on local disk, non-0 if on remote disk or failure -function is_directory_on_local_disk { - # df -l lists only local disks; if the given directory is not found then - # a non-zero exit code is given - $DF -l $1 > /dev/null 2>&1 -} - -AC_MSG_CHECKING([if build directory is on local disk]) -if is_directory_on_local_disk $OUTPUT_ROOT; then - OUTPUT_DIR_IS_LOCAL="yes" -else - OUTPUT_DIR_IS_LOCAL="no" -fi -AC_MSG_RESULT($OUTPUT_DIR_IS_LOCAL) - -# We're messing a bit with internal autoconf variables to put the config.status in the -# output directory instead of the current directory. -CONFIG_STATUS=$OUTPUT_ROOT/config.status +############################################################################### + +# Check for some common pitfalls +BASIC_TEST_USABILITY_ISSUES -# Now create the actual output files, after this, the main work of configure is done +# At the end, call the closed hook. (Dummy macro if no closed sources available) +CLOSED_HOOK + +# We're messing a bit with internal autoconf variables to put the config.status +# in the output directory instead of the current directory. +CONFIG_STATUS="$OUTPUT_ROOT/config.status" +# Create the actual output files. Now the main work of configure is done. AC_OUTPUT # Finally output some useful information to the user - -if test "x$CCACHE_FOUND" != x; then - if test "x$HAS_GOOD_CCACHE" = x; then - CCACHE_STATUS="installed, but disabled (version older than 3.1.4)" - CCACHE_HELP_MSG="You have ccache installed, but it is a version prior to 3.1.4. Try upgrading." - else - CCACHE_STATUS="installed and in use" - fi -else - if test "x$GCC" = xyes; then - CCACHE_STATUS="not installed (consider installing)" - CCACHE_HELP_MSG="You do not have ccache installed. Try installing it." - else - CCACHE_STATUS="not available for your system" - fi -fi - -printf "\n" -printf "====================================================\n" -printf "A new configuration has been successfully created in\n" -printf "$OUTPUT_ROOT\n" -if test "x$CONFIGURE_COMMAND_LINE" != x; then - printf "using configure arguments '$CONFIGURE_COMMAND_LINE'.\n" -else - printf "using default settings.\n" -fi - -printf "\n" -printf "Configuration summary:\n" -printf "* Debug level: $DEBUG_LEVEL\n" -printf "* JDK variant: $JDK_VARIANT\n" -printf "* JVM variants: $with_jvm_variants\n" -printf "* Host info: OS: $HOST_OS, CPU architecture: $HOST_CPU_ARCH, address length: $HOST_CPU_BITS\n" -printf "* Boot JDK: $BOOT_JDK\n" - -printf "\n" -printf "Build performance summary:\n" -printf "* Cores to use: $NUM_CORES\n" -printf "* Memory limit: $MEMORY_SIZE MB\n" -printf "* ccache status: $CCACHE_STATUS\n" - -if test "x$OUTPUT_DIR_IS_LOCAL" != "xyes"; then - printf "\n" - printf "WARNING: Your build output directory is not on a local disk.\n" - printf "This will severely degrade build performance!\n" - printf "It is recommended that you create an output directory on a local disk,\n" - printf "and run the configure script again from that directory.\n" -fi - -if test "x$CCACHE_HELP_MSG" != x; then - printf "\n" - printf "Build performance tip: ccache gives a tremendous speedup for C++ recompilations.\n" - printf "$CCACHE_HELP_MSG\n" - - help_on_build_dependency ccache - printf "$HELP_MSG\n" -fi +HELP_PRINT_SUMMARY_AND_WARNINGS --- old/common/autoconf/help.m4 2012-07-03 20:04:04.277850702 +0200 +++ new/common/autoconf/help.m4 2012-07-03 20:04:04.177849223 +0200 @@ -23,11 +23,13 @@ # questions. # -function prepare_help_system { +AC_DEFUN_ONCE([HELP_SETUP_DEPENDENCY_HELP], +[ AC_CHECK_PROGS(PKGHANDLER, apt-get yum port pkgutil pkgadd) -} - -function help_on_build_dependency { +]) + +AC_DEFUN([HELP_MSG_MISSING_DEPENDENCY], +[ # Print a helpful message on how to acquire the necessary build dependency. # $1 is the help tag: freetyp2, cups, pulse, alsa etc MISSING_DEPENDENCY=$1 @@ -51,9 +53,9 @@ if test "x$PKGHANDLER_COMMAND" != x; then HELP_MSG="You might be able to fix this by running '$PKGHANDLER_COMMAND'." fi -} +]) -function apt_help { +apt_help() { case $1 in devkit) PKGHANDLER_COMMAND="sudo apt-get install build-essential" ;; @@ -76,7 +78,7 @@ esac } -function yum_help { +yum_help() { case $1 in devkit) PKGHANDLER_COMMAND="sudo yum groupinstall \"Development Tools\"" ;; @@ -99,14 +101,97 @@ esac } -function port_help { +port_help() { PKGHANDLER_COMMAND="" } -function pkgutil_help { +pkgutil_help() { PKGHANDLER_COMMAND="" } -function pkgadd_help { +pkgadd_help() { PKGHANDLER_COMMAND="" } + +AC_DEFUN_ONCE([HELP_PRINT_SUMMARY_AND_WARNINGS], +[ +# Finally output some useful information to the user + +if test "x$CCACHE_FOUND" != x; then + if test "x$HAS_GOOD_CCACHE" = x; then + CCACHE_STATUS="installed, but disabled (version older than 3.1.4)" + CCACHE_HELP_MSG="You have ccache installed, but it is a version prior to 3.1.4. Try upgrading." + else + CCACHE_STATUS="installed and in use" + fi +else + if test "x$GCC" = xyes; then + CCACHE_STATUS="not installed (consider installing)" + CCACHE_HELP_MSG="You do not have ccache installed. Try installing it." + else + CCACHE_STATUS="not available for your system" + fi +fi + +printf "\n" +printf "====================================================\n" +printf "A new configuration has been successfully created in\n" +printf "$OUTPUT_ROOT\n" +if test "x$CONFIGURE_COMMAND_LINE" != x; then + printf "using configure arguments '$CONFIGURE_COMMAND_LINE'.\n" +else + printf "using default settings.\n" +fi + +printf "\n" +printf "Configuration summary:\n" +printf "* Debug level: $DEBUG_LEVEL\n" +printf "* JDK variant: $JDK_VARIANT\n" +printf "* JVM variants: $with_jvm_variants\n" +printf "* OpenJDK target: OS: $OPENJDK_TARGET_OS, CPU architecture: $OPENJDK_TARGET_CPU_ARCH, address length: $OPENJDK_TARGET_CPU_BITS\n" +printf "* Boot JDK: $BOOT_JDK\n" + +printf "\n" +printf "Build performance summary:\n" +printf "* Cores to use: $NUM_CORES\n" +printf "* Memory limit: $MEMORY_SIZE MB\n" +printf "* ccache status: $CCACHE_STATUS\n" +printf "\n" + +if test "x$CCACHE_HELP_MSG" != x && test "x$HIDE_PERFORMANCE_HINTS" = "xno"; then + printf "Build performance tip: ccache gives a tremendous speedup for C++ recompilations.\n" + printf "$CCACHE_HELP_MSG\n" + HELP_MSG_MISSING_DEPENDENCY([ccache]) + printf "$HELP_MSG\n" + printf "\n" +fi + +if test "x$BUILDING_MULTIPLE_JVM_VARIANTS" = "xyes"; then + printf "NOTE: You have requested to build more than one version of the JVM, which\n" + printf "will result in longer build times.\n" + printf "\n" +fi + +if test "x$FOUND_ALT_VARIABLES" != "x"; then + printf "WARNING: You have old-style ALT_ environment variables set.\n" + printf "These are not respected, and will be ignored. It is recommended\n" + printf "that you clean your environment. The following variables are set:\n" + printf "$FOUND_ALT_VARIABLES\n" + printf "\n" +fi + +if test "x$OUTPUT_DIR_IS_LOCAL" != "xyes"; then + printf "WARNING: Your build output directory is not on a local disk.\n" + printf "This will severely degrade build performance!\n" + printf "It is recommended that you create an output directory on a local disk,\n" + printf "and run the configure script again from that directory.\n" + printf "\n" +fi + +if test "x$IS_RECONFIGURE" = "xyes"; then + printf "WARNING: The result of this configuration has overridden an older\n" + printf "configuration. You *should* run 'make clean' to make sure you get a\n" + printf "proper build. Failure to do so might result in strange build problems.\n" + printf "\n" +fi +]) --- old/common/autoconf/platform.m4 2012-07-03 20:04:04.647856150 +0200 +++ new/common/autoconf/platform.m4 2012-07-03 20:04:04.557854826 +0200 @@ -23,272 +23,59 @@ # questions. # -AC_DEFUN([CHECK_FIND_DELETE], -[ - # Test if find supports -delete - AC_MSG_CHECKING([if find supports -delete]) - FIND_DELETE="-delete" - - DELETEDIR=`mktemp -d tmp.XXXXXXXXXX` || (echo Could not create temporary directory!; exit $?) - - echo Hejsan > $DELETEDIR/TestIfFindSupportsDelete - - TEST_DELETE=`$FIND "$DELETEDIR" -name TestIfFindSupportsDelete $FIND_DELETE 2>&1` - if test -f $DELETEDIR/TestIfFindSupportsDelete; then - # No, it does not. - rm $DELETEDIR/TestIfFindSupportsDelete - FIND_DELETE="-exec rm \{\} \+" - AC_MSG_RESULT([no]) - else - AC_MSG_RESULT([yes]) - fi - rmdir $DELETEDIR -]) - -AC_DEFUN([CHECK_NONEMPTY], -[ - # Test that variable $1 is not empty. - if test "" = "[$]$1"; then AC_MSG_ERROR(Could not find translit($1,A-Z,a-z) !); fi -]) - -AC_DEFUN([ADD_JVM_ARG_IF_OK], -[ - # Test if $1 is a valid argument to $3 (often is $JAVA passed as $3) - # If so, then append $1 to $2 - FOUND_WARN=`$3 $1 -version 2>&1 | grep -i warn` - FOUND_VERSION=`$3 $1 -version 2>&1 | grep " version \""` - if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then - $2="[$]$2 $1" - fi -]) - -AC_DEFUN([WHICHCMD], -[ - # Translate "gcc -E" into "`which gcc` -E" ie - # extract the full path to the binary and at the - # same time maintain any arguments passed to it. - # The command MUST exist in the path, or else! - tmp="[$]$1" - car="${tmp%% *}" - tmp="[$]$1 EOL" - cdr="${tmp#* }" - # On windows we want paths without spaces. - if test "x$BUILD_OS" = "xwindows"; then - WHICHCMD_SPACESAFE(car) - else - # "which" is not portable, but is used here - # because we know that the command exists! - car=`which $car` - fi - if test "x$cdr" != xEOL; then - $1="$car ${cdr% *}" - else - $1="$car" - fi -]) - -AC_DEFUN([SPACESAFE], -[ - # Fail with message $2 if var $1 contains a path with no spaces in it. - # Unless on Windows, where we can rewrite the path. - HAS_SPACE=`echo "[$]$1" | grep " "` - if test "x$HAS_SPACE" != x; then - if test "x$BUILD_OS" = "xwindows"; then - $1=`$CYGPATH -s -m -a "[$]$1"` - $1=`$CYGPATH -u "[$]$1"` - else - AC_MSG_ERROR([You cannot have spaces in $2! "[$]$1"]) - fi - fi -]) - -AC_DEFUN([WHICHCMD_SPACESAFE], -[ - # Translate long cygdrive or C:\sdfsf path - # into a short mixed mode path that has no - # spaces in it. - tmp="[$]$1" - if test "x$BUILD_OS" = "xwindows"; then - tmp=`$CYGPATH -u "[$]$1"` - tmp=`which "$tmp"` - # If file exists with .exe appended, that's the real filename - # and cygpath needs that to convert to short style path. - if test -f "${tmp}.exe"; then - tmp="${tmp}.exe" - elif test -f "${tmp}.cmd"; then - tmp="${tmp}.cmd" - fi - # Convert to C:/ mixed style path without spaces. - tmp=`$CYGPATH -s -m "$tmp"` - fi - $1="$tmp" -]) - -AC_DEFUN([REMOVE_SYMBOLIC_LINKS], -[ - if test "x$BUILD_OS" != xwindows; then - # Follow a chain of symbolic links. Use readlink - # where it exists, else fall back to horribly - # complicated shell code. - AC_PATH_PROG(READLINK, readlink) - if test "x$READLINK_TESTED" != yes; then - # On MacOSX there is a readlink tool with a different - # purpose than the GNU readlink tool. Check the found readlink. - ISGNU=`$READLINK --help 2>&1 | grep GNU` - if test "x$ISGNU" = x; then - # A readlink that we do not know how to use. - # Are there other non-GNU readlinks out there? - READLINK_TESTED=yes - READLINK= - fi - fi - - if test "x$READLINK" != x; then - $1=`$READLINK -f [$]$1` - else - STARTDIR=$PWD - COUNTER=0 - DIR=`dirname [$]$1` - FIL=`basename [$]$1` - while test $COUNTER -lt 20; do - ISLINK=`ls -l $DIR/$FIL | grep '\->' | sed -e 's/.*-> \(.*\)/\1/'` - if test "x$ISLINK" == x; then - # This is not a symbolic link! We are done! - break - fi - # The link might be relative! We have to use cd to travel safely. - cd $DIR - cd `dirname $ISLINK` - DIR=`pwd` - FIL=`basename $ISLINK` - let COUNTER=COUNTER+1 - done - cd $STARTDIR - $1=$DIR/$FIL - fi - fi -]) - -AC_DEFUN([TESTFOR_PROG_CCACHE], -[ - AC_ARG_ENABLE([ccache], - [AS_HELP_STRING([--disable-ccache], - [use ccache to speed up recompilations @<:@enabled@:>@])], - [ENABLE_CCACHE=${enable_ccache}], [ENABLE_CCACHE=yes]) - if test "x$ENABLE_CCACHE" = xyes; then - AC_PATH_PROG(CCACHE, ccache) - else - AC_MSG_CHECKING([for ccache]) - AC_MSG_RESULT([explicitly disabled]) - CCACHE= - fi - AC_SUBST(CCACHE) - - AC_ARG_WITH([ccache-dir], - [AS_HELP_STRING([--with-ccache-dir], - [where to store ccache files @<:@~/.ccache@:>@])]) - - if test "x$with_ccache_dir" != x; then - # When using a non home ccache directory, assume the use is to share ccache files - # with other users. Thus change the umask. - SET_CCACHE_DIR="CCACHE_DIR=$with_ccache_dir CCACHE_UMASK=002" - fi - CCACHE_FOUND="" - if test "x$CCACHE" != x; then - SETUP_CCACHE_USAGE - fi -]) - -AC_DEFUN([SETUP_CCACHE_USAGE], -[ - if test "x$CCACHE" != x; then - CCACHE_FOUND="true" - # Only use ccache if it is 3.1.4 or later, which supports - # precompiled headers. - AC_MSG_CHECKING([if ccache supports precompiled headers]) - HAS_GOOD_CCACHE=`($CCACHE --version | head -n 1 | grep -E 3.1.@<:@456789@:>@) 2> /dev/null` - if test "x$HAS_GOOD_CCACHE" = x; then - AC_MSG_RESULT([no, disabling ccache]) - CCACHE= - else - AC_MSG_RESULT([yes]) - AC_MSG_CHECKING([if C-compiler supports ccache precompiled headers]) - PUSHED_FLAGS="$CXXFLAGS" - CXXFLAGS="-fpch-preprocess $CXXFLAGS" - AC_COMPILE_IFELSE([AC_LANG_PROGRAM([], [])], [CC_KNOWS_CCACHE_TRICK=yes], [CC_KNOWS_CCACHE_TRICK=no]) - CXXFLAGS="$PUSHED_FLAGS" - if test "x$CC_KNOWS_CCACHE_TRICK" = xyes; then - AC_MSG_RESULT([yes]) - else - AC_MSG_RESULT([no, disabling ccaching of precompiled headers]) - CCACHE= - fi - fi - fi - - if test "x$CCACHE" != x; then - CCACHE_SLOPPINESS=time_macros - CCACHE="CCACHE_COMPRESS=1 $SET_CCACHE_DIR CCACHE_SLOPPINESS=$CCACHE_SLOPPINESS $CCACHE" - CCACHE_FLAGS=-fpch-preprocess - - if test "x$SET_CCACHE_DIR" != x; then - mkdir -p $CCACHE_DIR > /dev/null 2>&1 - chmod a+rwxs $CCACHE_DIR > /dev/null 2>&1 - fi - fi -]) - -AC_DEFUN([EXTRACT_HOST_AND_BUILD_AND_LEGACY_VARS], +AC_DEFUN([PLATFORM_EXTRACT_TARGET_AND_BUILD_AND_LEGACY_VARS], [ # Expects $host_os $host_cpu $build_os and $build_cpu - # and $with_data_model to have been setup! + # and $with_target_bits to have been setup! # # Translate the standard triplet(quadruplet) definition - # of the host/build system into - # HOST_OS=aix,bsd,hpux,linux,macosx,solaris,windows - # HOST_OS_FAMILY=bsd,gnu,sysv,win32,wince - # HOST_OS_API=posix,winapi + # of the target/build system into + # OPENJDK_TARGET_OS=aix,bsd,hpux,linux,macosx,solaris,windows + # OPENJDK_TARGET_OS_FAMILY=bsd,gnu,sysv,win32,wince + # OPENJDK_TARGET_OS_API=posix,winapi # - # HOST_CPU=ia32,x64,sparc,sparcv9,arm,arm64,ppc,ppc64 - # HOST_CPU_ARCH=x86,sparc,pcc,arm - # HOST_CPU_BITS=32,64 - # HOST_CPU_ENDIAN=big,little + # OPENJDK_TARGET_CPU=ia32,x64,sparc,sparcv9,arm,arm64,ppc,ppc64 + # OPENJDK_TARGET_CPU_ARCH=x86,sparc,pcc,arm + # OPENJDK_TARGET_CPU_BITS=32,64 + # OPENJDK_TARGET_CPU_ENDIAN=big,little # # The same values are setup for BUILD_... # # And the legacy variables, for controlling the old makefiles. - # LEGACY_HOST_CPU1=i586,amd64/x86_64,sparc,sparcv9,arm,arm64... - # LEGACY_HOST_CPU2=i386,amd64,sparc,sparcv9,arm,arm64... - # LEGACY_HOST_CPU3=sparcv9,amd64 (but only on solaris) - # LEGACY_HOST_OS_API=solaris,windows + # LEGACY_OPENJDK_TARGET_CPU1=i586,amd64/x86_64,sparc,sparcv9,arm,arm64... + # LEGACY_OPENJDK_TARGET_CPU2=i386,amd64,sparc,sparcv9,arm,arm64... + # LEGACY_OPENJDK_TARGET_CPU3=sparcv9,amd64 (but only on solaris) + # LEGACY_OPENJDK_TARGET_OS_API=solaris,windows # # We also copy the autoconf trip/quadruplet - # verbatim to HOST and BUILD - AC_SUBST(HOST, ${host}) - AC_SUBST(BUILD, ${build}) + # verbatim to OPENJDK_TARGET_SYSTEM (from the autoconf "host") and OPENJDK_BUILD_SYSTEM + OPENJDK_TARGET_SYSTEM="$host" + OPENJDK_BUILD_SYSTEM="$build" + AC_SUBST(OPENJDK_TARGET_SYSTEM) + AC_SUBST(OPENJDK_BUILD_SYSTEM) - EXTRACT_VARS_FROM_OS_TO(HOST,$host_os) - EXTRACT_VARS_FROM_CPU_TO(HOST,$host_cpu) + PLATFORM_EXTRACT_VARS_FROM_OS_TO(OPENJDK_TARGET,$host_os) + PLATFORM_EXTRACT_VARS_FROM_CPU_TO(OPENJDK_TARGET,$host_cpu) - EXTRACT_VARS_FROM_OS_TO(BUILD,$build_os) - EXTRACT_VARS_FROM_CPU_TO(BUILD,$build_cpu) + PLATFORM_EXTRACT_VARS_FROM_OS_TO(OPENJDK_BUILD,$build_os) + PLATFORM_EXTRACT_VARS_FROM_CPU_TO(OPENJDK_BUILD,$build_cpu) - if test "x$HOST_OS" != xsolaris; then - LEGACY_HOST_CPU3="" - LEGACY_BUILD_CPU3="" + if test "x$OPENJDK_TARGET_OS" != xsolaris; then + LEGACY_OPENJDK_TARGET_CPU3="" + LEGACY_OPENJDK_BUILD_CPU3="" fi - # On MacOSX and MacOSX only, we have a different name for the x64 CPU in ARCH (LEGACY_HOST_CPU1) ... - if test "x$HOST_OS" = xmacosx && test "x$HOST_CPU" = xx64; then - LEGACY_HOST_CPU1="x86_64" + # On MacOSX and MacOSX only, we have a different name for the x64 CPU in ARCH (LEGACY_OPENJDK_TARGET_CPU1) ... + if test "x$OPENJDK_TARGET_OS" = xmacosx && test "x$OPENJDK_TARGET_CPU" = xx64; then + LEGACY_OPENJDK_TARGET_CPU1="x86_64" fi - SET_RELEASE_FILE_OS_VALUES() + PLATFORM_SET_RELEASE_FILE_OS_VALUES ]) -AC_DEFUN([EXTRACT_VARS_FROM_OS_TO], +AC_DEFUN([PLATFORM_EXTRACT_VARS_FROM_OS_TO], [ - EXTRACT_VARS_FROM_OS($2) + PLATFORM_EXTRACT_VARS_FROM_OS($2) $1_OS="$VAR_OS" $1_OS_FAMILY="$VAR_OS_FAMILY" $1_OS_API="$VAR_OS_API" @@ -306,9 +93,9 @@ AC_SUBST(LEGACY_$1_OS_API) ]) -AC_DEFUN([EXTRACT_VARS_FROM_CPU_TO], +AC_DEFUN([PLATFORM_EXTRACT_VARS_FROM_CPU_TO], [ - EXTRACT_VARS_FROM_CPU($2) + PLATFORM_EXTRACT_VARS_FROM_CPU($2) $1_CPU="$VAR_CPU" $1_CPU_ARCH="$VAR_CPU_ARCH" $1_CPU_BITS="$VAR_CPU_BITS" @@ -339,12 +126,12 @@ LEGACY_$1_CPU3=amd64 fi if test "x$$1_CPU" = xsparcv9; then - LEGACY_$1_CPU3=sparvc9 + LEGACY_$1_CPU3=sparcv9 fi AC_SUBST(LEGACY_$1_CPU3) ]) -AC_DEFUN([EXTRACT_VARS_FROM_CPU], +AC_DEFUN([PLATFORM_EXTRACT_VARS_FROM_CPU], [ # First argument is the cpu name from the trip/quad case "$1" in @@ -372,8 +159,8 @@ arm*) VAR_CPU=arm VAR_CPU_ARCH=arm - VAR_CPU_BITS=3264 - VAR_CPU_ENDIAN=big + VAR_CPU_BITS=32 + VAR_CPU_ENDIAN=little VAR_LEGACY_CPU=arm ;; mips) @@ -401,7 +188,7 @@ VAR_CPU=ppc64 VAR_CPU_ARCH=ppc VAR_CPU_BITS=64 - VAR_CPU_ENDIAN=32 + VAR_CPU_ENDIAN=big VAR_LEGACY_CPU=ppc64 ;; sparc) @@ -416,7 +203,7 @@ VAR_CPU_ARCH=sparc VAR_CPU_BITS=64 VAR_CPU_ENDIAN=big - VAR_LEGACY_CPU=sparc_sparcv9 + VAR_LEGACY_CPU=sparcv9 ;; s390) VAR_CPU=s390 @@ -452,21 +239,37 @@ fi fi + # on solaris x86...default seems to be 32-bit + if test "x$VAR_OS" = "xsolaris" && \ + test "x$with_target_bits" = "x" && \ + test "x$VAR_CPU_ARCH" = "xx86" + then + with_target_bits=32 + fi + if test "x$VAR_CPU_ARCH" = "xx86"; then - if test "x$with_data_model" = "x64"; then + if test "x$with_target_bits" = "x64"; then VAR_CPU=x64 VAR_CPU_BITS=64 VAR_LEGACY_CPU=amd64 fi - if test "x$with_data_model" = "x32"; then + if test "x$with_target_bits" = "x32"; then VAR_CPU=ia32 VAR_CPU_BITS=32 VAR_LEGACY_CPU=i586 fi fi + + if test "x$VAR_CPU_ARCH" = "xsparc"; then + if test "x$with_target_bits" = "x64"; then + VAR_CPU=sparcv9 + VAR_CPU_BITS=64 + VAR_LEGACY_CPU=sparcv9 + fi + fi ]) -AC_DEFUN([EXTRACT_VARS_FROM_OS], +AC_DEFUN([PLATFORM_EXTRACT_VARS_FROM_OS], [ case "$1" in *linux*) @@ -495,49 +298,26 @@ VAR_OS_FAMILY=windows ;; *) - AC_MSG_ERROR([unsupported host operating system $1]) + AC_MSG_ERROR([unsupported operating system $1]) ;; esac ]) -AC_DEFUN([CHECK_COMPILER_VERSION], -[ - # Test the compilers that their versions are new enough. -# AC_MSG_CHECKING([version of GCC]) - gcc_ver=`${CC} -dumpversion` - gcc_major_ver=`echo ${gcc_ver}|cut -d'.' -f1` - gcc_minor_ver=`echo ${gcc_ver}|cut -d'.' -f2` -# AM_CONDITIONAL(GCC_OLD, test ! ${gcc_major_ver} -ge 4 -a ${gcc_minor_ver} -ge 3) -# AC_MSG_RESULT([${gcc_ver} (major version ${gcc_major_ver}, minor version ${gcc_minor_ver})]) -]) - -# Fixes paths on windows hosts to be mixed mode short. -AC_DEFUN([WIN_FIX_PATH], -[ - if test "x$BUILD_OS" = "xwindows"; then - AC_PATH_PROG(CYGPATH, cygpath) - tmp="[$]$1" - # Convert to C:/ mixed style path without spaces. - tmp=`$CYGPATH -s -m "$tmp"` - $1="$tmp" - fi -]) - -AC_DEFUN([SET_RELEASE_FILE_OS_VALUES], +AC_DEFUN([PLATFORM_SET_RELEASE_FILE_OS_VALUES], [ - if test "x$HOST_OS" = "xsolaris"; then + if test "x$OPENJDK_TARGET_OS" = "xsolaris"; then REQUIRED_OS_NAME=SunOS REQUIRED_OS_VERSION=5.10 fi - if test "x$HOST_OS" = "xlinux"; then + if test "x$OPENJDK_TARGET_OS" = "xlinux"; then REQUIRED_OS_NAME=Linux REQUIRED_OS_VERSION=2.6 fi - if test "x$HOST_OS" = "xwindows"; then + if test "x$OPENJDK_TARGET_OS" = "xwindows"; then REQUIRED_OS_NAME=Windows REQUIRED_OS_VERSION=5.1 fi - if test "x$HOST_OS" = "xmacosx"; then + if test "x$OPENJDK_TARGET_OS" = "xmacosx"; then REQUIRED_OS_NAME=Darwin REQUIRED_OS_VERSION=11.2 fi @@ -545,3 +325,174 @@ AC_SUBST(REQUIRED_OS_NAME) AC_SUBST(REQUIRED_OS_VERSION) ]) + +#%%% Build and target systems %%% +AC_DEFUN_ONCE([PLATFORM_SETUP_OPENJDK_BUILD_AND_TARGET], +[ +# Figure out the build and target systems. # Note that in autoconf terminology, "build" is obvious, but "target" +# is confusing; it assumes you are cross-compiling a cross-compiler (!) and "target" is thus the target of the +# product you're building. The target of this build is called "host". Since this is confusing to most people, we +# have not adopted that system, but use "target" as the platform we are building for. In some places though we need +# to use the configure naming style. +AC_CANONICAL_BUILD +AC_CANONICAL_HOST +AC_CANONICAL_TARGET + +AC_ARG_WITH(target-bits, [AS_HELP_STRING([--with-target-bits], + [build 32-bit or 64-bit binaries (for platforms that support it), e.g. --with-target-bits=32 @<:@guessed@:>@])]) + +if test "x$with_target_bits" != x && \ + test "x$with_target_bits" != x32 && \ + test "x$with_target_bits" != x64 ; then + AC_MSG_ERROR([--with-target-bits can only be 32 or 64, you specified $with_target_bits!]) +fi +# Translate the standard cpu-vendor-kernel-os quadruplets into +# the new TARGET_.... and BUILD_... and the legacy names used by +# the openjdk build. +# It uses $host_os $host_cpu $build_os $build_cpu and $with_target_bits +PLATFORM_EXTRACT_TARGET_AND_BUILD_AND_LEGACY_VARS + +# The LEGACY_OPENJDK_TARGET_CPU3 is the setting for ISA_DIR. +if test "x$LEGACY_OPENJDK_TARGET_CPU3" != x; then + LEGACY_OPENJDK_TARGET_CPU3="/${LEGACY_OPENJDK_TARGET_CPU3}" +fi + +# Now the following vars are defined. +# OPENJDK_TARGET_OS=aix,bsd,hpux,linux,macosx,solaris,windows +# OPENJDK_TARGET_OS_FAMILY=bsd,gnu,sysv,win32,wince +# OPENJDK_TARGET_OS_API=posix,winapi +# +# OPENJDK_TARGET_CPU=ia32,x64,sparc,sparcv9,arm,arm64,ppc,ppc64 +# OPENJDK_TARGET_CPU_ARCH=x86,sparc,pcc,arm +# OPENJDK_TARGET_CPU_BITS=32,64 +# OPENJDK_TARGET_CPU_ENDIAN=big,little +# +# There is also a: +# LEGACY_OPENJDK_TARGET_CPU1=i586,amd64,.... # used to set the old var ARCH +# LEGACY_OPENJDK_TARGET_CPU2=i386,amd64,.... # used to set the old var LIBARCH +# LEGACY_OPENJDK_TARGET_CPU3=only sparcv9,amd64 # used to set the ISA_DIR on Solaris +# There was also a BUILDARCH that had i486,amd64,... but we do not use that +# in the new build. +# LEGACY_OPENJDK_TARGET_OS_API=solaris,windows # used to select source roots +]) + +AC_DEFUN_ONCE([PLATFORM_SETUP_OPENJDK_BUILD_OS_VERSION], +[ +############################################################################### + +# Note that this is the build platform OS version! + +OS_VERSION="`uname -r | ${SED} 's!\.! !g' | ${SED} 's!-! !g'`" +OS_VERSION_MAJOR="`${ECHO} ${OS_VERSION} | ${CUT} -f 1 -d ' '`" +OS_VERSION_MINOR="`${ECHO} ${OS_VERSION} | ${CUT} -f 2 -d ' '`" +OS_VERSION_MICRO="`${ECHO} ${OS_VERSION} | ${CUT} -f 3 -d ' '`" +AC_SUBST(OS_VERSION_MAJOR) +AC_SUBST(OS_VERSION_MINOR) +AC_SUBST(OS_VERSION_MICRO) +]) + +AC_DEFUN_ONCE([PLATFORM_TEST_OPENJDK_TARGET_BITS], +[ +############################################################################### +# +# Now we check if libjvm.so will use 32 or 64 bit pointers for the C/C++ code. +# (The JVM can use 32 or 64 bit Java pointers but that decision +# is made at runtime.) +# +AC_LANG_PUSH(C++) +OLD_CXXFLAGS="$CXXFLAGS" +if test "x$OPENJDK_TARGET_OS" != xwindows && test "x$with_target_bits" != x; then + CXXFLAGS="-m${with_target_bits} $CXXFLAGS" +fi +AC_CHECK_SIZEOF([int *], [1111]) +CXXFLAGS="$OLD_CXXFLAGS" +AC_LANG_POP(C++) + +# keep track of c/cxx flags that we added outselves... +# to prevent emitting warning... +ADDED_CFLAGS= +ADDED_CXXFLAGS= +ADDED_LDFLAGS= + +if test "x$ac_cv_sizeof_int_p" = x0; then + # The test failed, lets pick the assumed value. + ARCH_DATA_MODEL=$OPENJDK_TARGET_CPU_BITS +else + ARCH_DATA_MODEL=`expr 8 \* $ac_cv_sizeof_int_p` + + if test "x$OPENJDK_TARGET_OS" != xwindows && test "x$with_target_bits" != x; then + ADDED_CFLAGS=" -m${with_target_bits}" + ADDED_CXXFLAGS=" -m${with_target_bits}" + ADDED_LDFLAGS=" -m${with_target_bits}" + + CFLAGS="${CFLAGS}${ADDED_CFLAGS}" + CXXFLAGS="${CXXFLAGS}${ADDED_CXXFLAGS}" + LDFLAGS="${LDFLAGS}${ADDED_LDFLAGS}" + + CFLAGS_JDK="${CFLAGS_JDK}${ADDED_CFLAGS}" + CXXFLAGS_JDK="${CXXFLAGS_JDK}${ADDED_CXXFLAGS}" + LDFLAGS_JDK="${LDFLAGS_JDK}${ADDED_LDFLAGS}" + fi +fi + +if test "x$ARCH_DATA_MODEL" = x64; then + A_LP64="LP64:=" + ADD_LP64="-D_LP64=1" +fi +AC_MSG_CHECKING([for target address size]) +AC_MSG_RESULT([$ARCH_DATA_MODEL bits]) +AC_SUBST(LP64,$A_LP64) +AC_SUBST(ARCH_DATA_MODEL) + +if test "x$ARCH_DATA_MODEL" != "x$OPENJDK_TARGET_CPU_BITS"; then + AC_MSG_ERROR([The tested number of bits in the target ($ARCH_DATA_MODEL) differs from the number of bits expected to be found in the target ($OPENJDK_TARGET_CPU_BITS)]) +fi + +# +# NOTE: check for -mstackrealign needs to be below potential addition of -m32 +# +if test "x$OPENJDK_TARGET_CPU_BITS" = x32 && test "x$OPENJDK_TARGET_OS" = xmacosx; then + # On 32-bit MacOSX the OS requires C-entry points to be 16 byte aligned. + # While waiting for a better solution, the current workaround is to use -mstackrealign. + CFLAGS="$CFLAGS -mstackrealign" + AC_MSG_CHECKING([if 32-bit compiler supports -mstackrealign]) + AC_LINK_IFELSE([AC_LANG_SOURCE([[int main() { return 0; }]])], + [ + AC_MSG_RESULT([yes]) + ], + [ + AC_MSG_RESULT([no]) + AC_MSG_ERROR([The selected compiler $CXX does not support -mstackrealign! Try to put another compiler in the path.]) + ]) +fi +]) + +AC_DEFUN_ONCE([PLATFORM_SETUP_OPENJDK_TARGET_ENDIANNESS], +[ +############################################################################### +# +# Is the target little of big endian? +# +AC_C_BIGENDIAN([ENDIAN="big"],[ENDIAN="little"],[ENDIAN="unknown"],[ENDIAN="universal_endianness"]) + +if test "x$ENDIAN" = xuniversal_endianness; then + AC_MSG_ERROR([Building with both big and little endianness is not supported]) +fi +if test "x$ENDIAN" = xunknown; then + ENDIAN="$OPENJDK_TARGET_CPU_ENDIAN" +fi +if test "x$ENDIAN" != "x$OPENJDK_TARGET_CPU_ENDIAN"; then + AC_MSG_WARN([The tested endian in the target ($ENDIAN) differs from the endian expected to be found in the target ($OPENJDK_TARGET_CPU_ENDIAN)]) + ENDIAN="$OPENJDK_TARGET_CPU_ENDIAN" +fi +AC_SUBST(ENDIAN) +]) + +AC_DEFUN_ONCE([PLATFORM_SETUP_OPENJDK_TARGET_ISADIR], +[ +############################################################################### +# +# Could someone enlighten this configure script with a comment about libCrun? +# +# +]) --- old/common/autoconf/spec.gmk.in 2012-07-03 20:04:05.047862054 +0200 +++ new/common/autoconf/spec.gmk.in 2012-07-03 20:04:04.957860722 +0200 @@ -23,8 +23,8 @@ # questions. # -# Configured @DATE_WHEN_CONFIGURED@ to build for a @HOST@ system, -# using ./configure @CONFIGURE_COMMAND_LINE@ +# Configured @DATE_WHEN_CONFIGURED@ to build for a @OPENJDK_TARGET_SYSTEM@ system, +# using 'configure @CONFIGURE_COMMAND_LINE@' # When calling macros, the spaces between arguments are # often semantically important! Sometimes we need to subst @@ -67,48 +67,50 @@ # The "human readable" name of this configuration CONF_NAME:=@CONF_NAME@ -# The built jdk will run in this host system. -HOST:=@HOST@ -HOST_OS:=@HOST_OS@ -HOST_OS_FAMILY:=@HOST_OS_FAMILY@ -HOST_OS_API:=@HOST_OS_API@ - -HOST_CPU:=@HOST_CPU@ -HOST_CPU_ARCH:=@HOST_CPU_ARCH@ -HOST_CPU_BITS:=@HOST_CPU_BITS@ -HOST_CPU_ENDIAN:=@HOST_CPU_ENDIAN@ +# The built jdk will run in this target system. +OPENJDK_TARGET_SYSTEM:=@OPENJDK_TARGET_SYSTEM@ + +OPENJDK_TARGET_OS:=@OPENJDK_TARGET_OS@ +OPENJDK_TARGET_OS_FAMILY:=@OPENJDK_TARGET_OS_FAMILY@ +OPENJDK_TARGET_OS_API:=@OPENJDK_TARGET_OS_API@ + +OPENJDK_TARGET_CPU:=@OPENJDK_TARGET_CPU@ +OPENJDK_TARGET_CPU_ARCH:=@OPENJDK_TARGET_CPU_ARCH@ +OPENJDK_TARGET_CPU_BITS:=@OPENJDK_TARGET_CPU_BITS@ +OPENJDK_TARGET_CPU_ENDIAN:=@OPENJDK_TARGET_CPU_ENDIAN@ # We are building on this build system. -# When not cross-compiling, it is the same as the host. -BUILD:=@BUILD@ -BUILD_OS:=@BUILD_OS@ -BUILD_OS_FAMILY:=@BUILD_OS_FAMILY@ -BUILD_OS_API:=@BUILD_OS_API@ - -BUILD_CPU:=@BUILD_CPU@ -BUILD_CPU_ARCH:=@BUILD_CPU_ARCH@ -BUILD_CPU_BITS:=@BUILD_CPU_BITS@ -BUILD_CPU_ENDIAN:=@BUILD_CPU_ENDIAN@ +# When not cross-compiling, it is the same as the target. +OPENJDK_BUILD_SYSTEM:=@OPENJDK_BUILD_SYSTEM@ + +OPENJDK_BUILD_OS:=@OPENJDK_BUILD_OS@ +OPENJDK_BUILD_OS_FAMILY:=@OPENJDK_BUILD_OS_FAMILY@ +OPENJDK_BUILD_OS_API:=@OPENJDK_BUILD_OS_API@ + +OPENJDK_BUILD_CPU:=@OPENJDK_BUILD_CPU@ +OPENJDK_BUILD_CPU_ARCH:=@OPENJDK_BUILD_CPU_ARCH@ +OPENJDK_BUILD_CPU_BITS:=@OPENJDK_BUILD_CPU_BITS@ +OPENJDK_BUILD_CPU_ENDIAN:=@OPENJDK_BUILD_CPU_ENDIAN@ # Legacy OS values for use in release file. REQUIRED_OS_NAME:=@REQUIRED_OS_NAME@ REQUIRED_OS_VERSION:=@REQUIRED_OS_VERSION@ -# Old name for HOST_OS (aix,bsd,hpux,linux,macosx,solaris,windows etc) -PLATFORM:=@HOST_OS@ -# Old name for HOST_CPU, uses i586 and amd64, instead of ia32 and x64. -ARCH:=@LEGACY_HOST_CPU1@ +# Old name for OPENJDK_TARGET_OS (aix,bsd,hpux,linux,macosx,solaris,windows etc) +PLATFORM:=@OPENJDK_TARGET_OS@ +# Old name for OPENJDK_TARGET_CPU, uses i586 and amd64, instead of ia32 and x64. +ARCH:=@LEGACY_OPENJDK_TARGET_CPU1@ # Yet another name for arch used for an extra subdir below the jvm lib. # Uses i386 and amd64, instead of ia32 and x64. -LIBARCH:=@LEGACY_HOST_CPU2@ +LIBARCH:=@LEGACY_OPENJDK_TARGET_CPU2@ # Use to switch between solaris and windows subdirs in the jdk. -LEGACY_HOST_OS_API:=@LEGACY_HOST_OS_API@ +LEGACY_OPENJDK_TARGET_OS_API:=@LEGACY_OPENJDK_TARGET_OS_API@ # 32 or 64 bit -ARCH_DATA_MODEL:=@HOST_CPU_BITS@ +ARCH_DATA_MODEL:=@OPENJDK_TARGET_CPU_BITS@ # Legacy setting for building for a 64 bit machine. # If yes then this expands to _LP64:=1 @LP64@ -ENDIAN:=@HOST_CPU_ENDIAN@ +ENDIAN:=@OPENJDK_TARGET_CPU_ENDIAN@ @SET_OPENJDK@ JIGSAW:=@JIGSAW@ LIBM:=-lm @@ -185,7 +187,6 @@ # The java launcher uses the default. # The other can be selected by specifying -client -server -kernel -zero or -zeroshark # on the java launcher command line. -DEFAULT_JVM_VARIANT:=@DEFAULT_JVM_VARIANT@ JVM_VARIANTS:=@JVM_VARIANTS@ JVM_VARIANT_SERVER:=@JVM_VARIANT_SERVER@ JVM_VARIANT_CLIENT:=@JVM_VARIANT_CLIENT@ @@ -202,53 +203,42 @@ # Legacy setting: -debug or -fastdebug BUILD_VARIANT_RELEASE:=@BUILD_VARIANT_RELEASE@ -LANGTOOLS_OUTPUTDIR:=@OUTPUT_ROOT@/langtools -LANGTOOLS_DIST:=@OUTPUT_ROOT@/langtools/dist -LANGTOOLS_MAKE_ARGS:=@LANGTOOLS_MAKE_ARGS@ - -CORBA_OUTPUTDIR:=@OUTPUT_ROOT@/corba -CORBA_DIST:=@OUTPUT_ROOT@/corba/dist -CORBA_MAKE_ARGS:=@CORBA_MAKE_ARGS@ - -JAXP_OUTPUTDIR:=@OUTPUT_ROOT@/jaxp -JAXP_DIST:=@OUTPUT_ROOT@/jaxp/dist -JAXP_MAKE_ARGS:=@JAXP_MAKE_ARGS@ - -JAXWS_OUTPUTDIR:=@OUTPUT_ROOT@/jaxws -JAXWS_DIST:=@OUTPUT_ROOT@/jaxws/dist -JAXWS_MAKE_ARGS:=@JAXWS_MAKE_ARGS@ - -HOTSPOT_OUTPUTDIR:=@OUTPUT_ROOT@/hotspot -HOTSPOT_DIST:=@OUTPUT_ROOT@/hotspot/dist -HOTSPOT_MAKE_ARGS:=@HOTSPOT_MAKE_ARGS@ +LANGTOOLS_OUTPUTDIR:=@LANGTOOLS_OUTPUTDIR@ +CORBA_OUTPUTDIR:=@CORBA_OUTPUTDIR@ +JAXP_OUTPUTDIR:=@JAXP_OUTPUTDIR@ +JAXWS_OUTPUTDIR:=@JAXWS_OUTPUTDIR@ +HOTSPOT_OUTPUTDIR:=@HOTSPOT_OUTPUTDIR@ # This where a working jvm is built. # You can run $(JDK_OUTPUTDIR)/bin/java # Though the layout of the contents of $(JDK_OUTPUTDIR) is not # yet the same as a default installation. -HOTSPOT_IMPORT_PATH:=@OUTPUT_ROOT@/hotspot/dist JDK_OUTPUTDIR:=@OUTPUT_ROOT@/jdk -JDK_MAKE_ARGS:=@JDK_MAKE_ARGS@ # When you run "make install" it will create the standardized # layout for the jdk and the jre inside the images subdir. # Then it will copy the contents of the jdk into the installation # directory. IMAGES_OUTPUTDIR:=@OUTPUT_ROOT@/images -IMAGES_MAKE_ARGS:=@IMAGES_MAKE_ARGS@ + +LANGTOOLS_DIST:=@LANGTOOLS_DIST@ +CORBA_DIST:=@CORBA_DIST@ +JAXP_DIST:=@JAXP_DIST@ +JAXWS_DIST:=@JAXWS_DIST@ +HOTSPOT_DIST:=@HOTSPOT_DIST@ + # Legacy variables used by Release.gmk JDK_IMAGE_DIR:=$(IMAGES_OUTPUTDIR)/j2sdk-image JRE_IMAGE_DIR:=$(IMAGES_OUTPUTDIR)/j2re-image # Can be /sparcv9 or /amd64 on Solaris -ISA_DIR:=@LEGACY_HOST_CPU3@ +ISA_DIR:=@LEGACY_OPENJDK_TARGET_CPU3@ BINDIR:=$(JDK_OUTPUTDIR)/bin$(ISA_DIR) # The boot jdk to use ALT_BOOTDIR:=@BOOT_JDK@ BOOT_JDK:=@BOOT_JDK@ BOOT_JDK_JVMARGS:=@BOOT_JDK_JVMARGS@ -BOOT_JAVAC_ARGS:=@BOOT_JAVAC_ARGS@ BOOT_RTJAR:=@BOOT_RTJAR@ BOOT_TOOLSJAR:=@BOOT_TOOLSJAR@ @@ -258,8 +248,6 @@ # Information about the build system NUM_CORES:=@NUM_CORES@ -# This is used from the libjvm build for C/C++ code. -HOTSPOT_BUILD_JOBS:=@CONCURRENT_BUILD_JOBS@ # This is used from the jdk build for C/C++ code. PARALLEL_COMPILE_JOBS:=@CONCURRENT_BUILD_JOBS@ # Store javac server synchronization files here, and @@ -282,6 +270,8 @@ JAVAC_USE_DEPS:=@JAVAC_USE_DEPS@ # We can invoke javac: SINGLE_THREADED_BATCH or MULTI_CORE_CONCURRENT JAVAC_USE_MODE:=@JAVAC_USE_MODE@ +# Enable not yet complete sjavac support. +ENABLE_SJAVAC:=@ENABLE_SJAVAC@ # The OpenJDK makefiles should be changed to using the standard # configure output ..._CFLAGS and ..._LIBS. In the meantime we @@ -375,22 +365,24 @@ @DEFINE_CROSS_COMPILE_ARCH@ # The HOSTCC should really be named BUILDCC, ie build executable for # the build platform. Same as CC when not cross compiling. -HOSTCC:=@HOSTCC@ -HOSTCXX:=@HOSTCXX@ +HOSTCC:=@UNCYGDRIVE@ @HOSTCC@ +HOSTCXX:=@UNCYGDRIVE@ @HOSTCXX@ # And of course, the jdk spells HOSTCC as NIO_CC/HOST_CC -HOST_CC:=@HOSTCC@ -NIO_CC:=@HOSTCC@ +HOST_CC:=@UNCYGDRIVE@ @HOSTCC@ +NIO_CC:=@UNCYGDRIVE@ @HOSTCC@ + +HOST_LD:=@UNCYGDRIVE@ @HOSTLD@ -AS:=@AS@ +AS:=@UNCYGDRIVE@ @AS@ ASFLAGS:=@ASFLAGS@ # AR is used to create a static library (is ar in posix, lib.exe in winapi) AR:=@UNCYGDRIVE@ @AR@ ARFLAGS:=@ARFLAGS@ -NM:=@NM@ -STRIP:=@STRIP@ -MCS:=@MCS@ +NM:=@UNCYGDRIVE@ @NM@ +STRIP:=@UNCYGDRIVE@ @STRIP@ +MCS:=@UNCYGDRIVE@ @MCS@ # Command to create a shared library SHARED_LIBRARY_FLAGS:=@SHARED_LIBRARY_FLAGS@ @@ -404,6 +396,17 @@ C_FLAG_REORDER:=@C_FLAG_REORDER@ CXX_FLAG_REORDER:=@CXX_FLAG_REORDER@ +# +# Options for generating debug symbols +ENABLE_DEBUG_SYMBOLS:=@ENABLE_DEBUG_SYMBOLS@ +CFLAGS_DEBUG_SYMBOLS:=@CFLAGS_DEBUG_SYMBOLS@ +CXXFLAGS_DEBUG_SYMBOLS:=@CXXFLAGS_DEBUG_SYMBOLS@ +ZIP_DEBUGINFO_FILES:=@ZIP_DEBUGINFO_FILES@ + +# +# Compress (or not) jars +COMPRESS_JARS=@COMPRESS_JARS@ + # Options to linker to specify the library name. # (Note absence of := assignment, because we do not want to evaluate the macro body here) SET_SHARED_LIBRARY_NAME=@SET_SHARED_LIBRARY_NAME@ @@ -507,23 +510,28 @@ EXPR:=@EXPR@ FILE:=@FILE@ HG:=@HG@ +OBJCOPY:=@OBJCOPY@ UNCYGDRIVE:=@UNCYGDRIVE@ # Where the build output is stored for your convenience. BUILD_LOG:=@BUILD_LOG@ +BUILD_LOG_PREVIOUS:=@BUILD_LOG_PREVIOUS@ BUILD_LOG_WRAPPER:=@BUILD_LOG_WRAPPER@ # Build setup ENABLE_DOCS:=@ENABLE_DOCS@ GENERATE_DOCS:=@ENABLE_DOCS@ DISABLE_NIMBUS:=@DISABLE_NIMBUS@ +ENABLE_JFR=@ENABLE_JFR@ USE_EXTERNAL_LIBJPEG:=@USE_EXTERNAL_LIBJPEG@ USE_EXTERNAL_LIBGIF:=@USE_EXTERNAL_LIBGIF@ USE_EXTERNAL_LIBZ:=@USE_EXTERNAL_LIBZ@ +LIBZIP_CAN_USE_MMAP:=@LIBZIP_CAN_USE_MMAP@ CHECK_FOR_VCINSTALLDIR=@CHECK_FOR_VCINSTALLDIR@ MSVCRNN_DLL:=@MSVCR100DLL@ + # ADD_SRCS takes a single argument with source roots # and appends any corresponding source roots found # below --with-add-source-root and below @@ -553,6 +561,17 @@ #################################################### # +# Legacy Hotspot support + +HOTSPOT_DIST:=@HOTSPOT_DIST@ +HOTSPOT_MAKE_ARGS:=@HOTSPOT_MAKE_ARGS@ +# This is used from the libjvm build for C/C++ code. +HOTSPOT_BUILD_JOBS:=@CONCURRENT_BUILD_JOBS@ +# Control wether Hotspot runs Queens test after building +TEST_IN_BUILD=@TEST_IN_BUILD@ + +#################################################### +# # INSTALLATION # @@ -611,10 +630,9 @@ # Name of Service Agent library SALIB_NAME=@SALIB_NAME@ -# Control wether Hotspot runs Queens test after building -TEST_IN_BUILD=@TEST_IN_BUILD@ - OS_VERSION_MAJOR:=@OS_VERSION_MAJOR@ OS_VERSION_MINOR:=@OS_VERSION_MINOR@ OS_VERSION_MICRO:=@OS_VERSION_MICRO@ +# Include the closed-spec.gmk file if it exists +-include $(dir @SPEC@)/closed-spec.gmk --- old/common/bin/compareimage.sh 2012-07-03 20:04:05.447867951 +0200 +++ new/common/bin/compareimage.sh 2012-07-03 20:04:05.357866619 +0200 @@ -177,40 +177,44 @@ fi fi -if [ "`uname`" == "SunOS" ]; then - PERM="gstat -c%a" -elif [ $OSTYPE == "cygwin" ]; then - PERM= -elif [ "`uname`" == "Darwin" ]; then - PERM="stat -f%p" -elif [ "`uname`" == "Linux" ]; then - PERM="stat -c%A" -else - PERM="stat -c%a" -fi +echo -n Permissions... +found="" +for f in `cd $OLD && find . -type f` +do + if [ ! -f ${OLD}/$f ]; then continue; fi + if [ ! -f ${NEW}/$f ]; then continue; fi + OP=`ls -l ${OLD}/$f | awk '{printf("%.10s\n", $1);}'` + NP=`ls -l ${NEW}/$f | awk '{printf("%.10s\n", $1);}'` + if [ "$OP" != "$NP" ] + then + if [ -z "$found" ]; then echo ; found="yes"; fi + printf "\told: ${OP} new: ${NP}\t$f\n" + fi -if [ "${PERM}" ] -then - echo -n Permissions... - found="" - for f in `cd $OLD && find . -type f` - do - if [ ! -f ${OLD}/$f ]; then continue; fi - if [ ! -f ${NEW}/$f ]; then continue; fi - OP=`${PERM} ${OLD}/$f` - NP=`${PERM} ${NEW}/$f` - if [ "$OP" != "$NP" ] + OF=`cd ${OLD} && file $f` + NF=`cd ${NEW} && file $f` + if [ "$f" = "./src.zip" ] + then + if [ "`echo $OF | grep -ic zip`" -gt 0 -a "`echo $NF | grep -ic zip`" -gt 0 ] then - if [ -z "$found" ]; then echo ; found="yes"; fi - printf "\told: ${OP} new: ${NP}\t$f\n" + # the way we produces zip-files make it so that directories are stored in old file + # but not in new (only files with full-path) + # this makes file-5.09 report them as different + continue; fi - done - if [ -z "$found" ]; then echo ; found="yes"; fi -fi + fi + + if [ "$OF" != "$NF" ] + then + if [ -z "$found" ]; then echo ; found="yes"; fi + printf "\tFILE: old: ${OF} new: ${NF}\t$f\n" + fi +done +if [ -z "$found" ]; then echo ; found="yes"; fi GENERAL_FILES=$(cd $OLD && find . -type f ! -name "*.so" ! -name "*.jar" ! -name "*.zip" \ ! -name "*.debuginfo" ! -name "*.dylib" ! -name "jexec" \ - ! -name "ct.sym" \ + ! -name "ct.sym" ! -name "*.diz" \ | grep -v "./bin/" | sort | $FILTER) echo General files... for f in $GENERAL_FILES --- old/common/bin/diffexec.sh 2012-07-03 20:04:05.837873695 +0200 +++ new/common/bin/diffexec.sh 2012-07-03 20:04:05.737872226 +0200 @@ -49,21 +49,24 @@ fi if [ "`uname`" == "SunOS" ]; then - NM=gnm - STAT="gstat -c%s" + if [ -f "`which nm`" ]; then + NM=nm + elif [ -f "`which gnm`" ]; then + NM=gnm + else + echo "No nm command found" + exit 10 + fi LDD=ldd elif [ $OSTYPE == "cygwin" ]; then NM="$VS100COMNTOOLS/../../VC/bin/amd64/dumpbin.exe" NM_ARGS=/exports - STAT="stat -c%s" LDD= elif [ "`uname`" == "Darwin" ]; then NM=nm - STAT="stat -f%z" LDD="otool -L" else NM=nm - STAT="stat -c%s" LDD=ldd fi @@ -79,8 +82,8 @@ OLD=$(cd $(dirname $1) && pwd)/$(basename $1) NEW=$(cd $(dirname $2) && pwd)/$(basename $2) -OLD_SIZE=$($STAT "$OLD") -NEW_SIZE=$($STAT "$NEW") +OLD_SIZE=$(ls -l "$OLD" | awk '{ print $5 }') +NEW_SIZE=$(ls -l "$NEW" | awk '{ print $5 }') if [ $# -gt 3 ] then --- old/common/bin/diffjarzip.sh 2012-07-03 20:04:06.197879001 +0200 +++ new/common/bin/diffjarzip.sh 2012-07-03 20:04:06.117877820 +0200 @@ -72,7 +72,11 @@ fi if [ "`uname`" == "SunOS" ]; then - DIFF=gdiff + if [ -f "`which gdiff`" ]; then + DIFF=gdiff + else + DIFF=diff + fi else DIFF=diff fi --- old/common/bin/difflib.sh 2012-07-03 20:04:06.587884748 +0200 +++ new/common/bin/difflib.sh 2012-07-03 20:04:06.487883275 +0200 @@ -53,21 +53,27 @@ fi if [ "`uname`" == "SunOS" ]; then - NM=gnm - STAT="gstat -c%s" + if [ -f "`which gnm`" ]; then + NM=gnm +# Jonas 2012-05-29: solaris native nm produces radically different output than gnm +# so if using that...we need different filter than "cut -f 2-" +# + elif [ -f "`which nm`" ]; then + NM=nm + else + echo "No nm command found" + exit 10 + fi LDD=ldd elif [ $OSTYPE == "cygwin" ]; then NM="$VS100COMNTOOLS/../../VC/bin/amd64/dumpbin.exe" NM_ARGS=/exports - STAT="stat -c%s" LDD= elif [ "`uname`" == "Darwin" ]; then NM=nm - STAT="stat -f%z" LDD="otool -L" else NM=nm - STAT="stat -c%s" LDD=ldd fi @@ -83,8 +89,8 @@ OLD=$(cd $(dirname $1) && pwd)/$(basename $1) NEW=$(cd $(dirname $2) && pwd)/$(basename $2) -OLD_SIZE=$($STAT "$OLD") -NEW_SIZE=$($STAT "$NEW") +OLD_SIZE=$(ls -l "$OLD" | awk '{ print $5 }') +NEW_SIZE=$(ls -l "$NEW" | awk '{ print $5 }') if [ $# -gt 3 ] then @@ -122,8 +128,8 @@ exit 0 fi -OLD_SYMBOLS=$COMPARE_ROOT/$OLD_NAME.old -NEW_SYMBOLS=$COMPARE_ROOT/$NEW_NAME.new +OLD_SYMBOLS=$COMPARE_ROOT/nm.$OLD_NAME.old +NEW_SYMBOLS=$COMPARE_ROOT/nm.$NEW_NAME.new mkdir -p $(dirname $OLD_SYMBOLS) mkdir -p $(dirname $NEW_SYMBOLS) --- old/common/makefiles/IdlCompilation.gmk 2012-07-03 20:04:06.957890205 +0200 +++ new/common/makefiles/IdlCompilation.gmk 2012-07-03 20:04:06.867888876 +0200 @@ -87,6 +87,8 @@ $(if $7,$1_$(strip $7)) $(if $8,$1_$(strip $8)) $(if $9,$1_$(strip $9)) +$(if $(10),$(error Internal makefile error: Too many arguments to SetupIdlCompilation, please update IdlCompilation.gmk)) + # Remove any relative addressing in the paths. $1_SRC := $$(abspath $$($1_SRC)) $1_BIN := $$(abspath $$($1_BIN)) @@ -111,4 +113,3 @@ endef .SUFFIXES: .java .class .package - --- old/common/makefiles/JavaCompilation.gmk 2012-07-03 20:04:07.347895950 +0200 +++ new/common/makefiles/JavaCompilation.gmk 2012-07-03 20:04:07.237894333 +0200 @@ -94,6 +94,7 @@ $(if $7,$1_$(strip $7)) $(if $8,$1_$(strip $8)) $(if $9,$1_$(strip $9)) + $(if $(10),$(error Internal makefile error: Too many arguments to SetupJavaCompiler, please update JavaCompilation.gmk)) ifeq ($$($1_MODE),MULTI_CORE_CONCURRENT) ifneq (,$$($1_SERVER_DIR)) @@ -130,6 +131,7 @@ # SKIP_METAINF:=Set to prevent contents of an META-INF directory to be automatically # added to the archive. # EXTRA_MANIFEST_ATTR:=Extra attribute to add to manifest. + # CHECK_COMPRESS_JAR Check the COMPRESS_JAR variable $(if $3,$1_$(strip $3)) $(if $4,$1_$(strip $4)) $(if $5,$1_$(strip $5)) @@ -143,6 +145,7 @@ $(if $(13),$1_$(strip $(13))) $(if $(14),$1_$(strip $(14))) $(if $(15),$1_$(strip $(15))) + $(if $(16),$(error Internal makefile error: Too many arguments to SetupArchive, please update JavaCompilation.gmk)) $1_JARMAIN:=$(strip $$($1_JARMAIN)) $1_JARNAME:=$$(notdir $$($1_JAR)) @@ -243,6 +246,16 @@ ($(FIND) $$(src) -name _the.package -exec $(TOUCH) -r $$($1_JAR) \{\} \; ; true) &&) # Use a slightly shorter name for logging, but with enough path to identify this jar. $1_NAME:=$$(subst $$(OUTPUT_ROOT)/,,$$($1_JAR)) + + ifneq (,$$($1_CHECK_COMPRESS_JAR)) + $1_JAR_CREATE_OPTIONS := c0fm + ifeq ($(COMPRESS_JARS), true) + $1_JAR_CREATE_OPTIONS := cfm + endif + else + $1_JAR_CREATE_OPTIONS := cfm + endif + # Here is the rule that creates/updates the jar file. $$($1_JAR) : $2 $$($1_ALL_SRC) $(MKDIR) -p $$($1_BIN) @@ -283,7 +296,7 @@ $$(foreach src,$$($1_SRCS),($(FIND) $$(src) -name _the.package.api.notify $(FIND_DELETE); true) &&) true ; \ fi ; \ else \ - $(ECHO) Creating $$($1_NAME) && $(JAR) cfm $$@ $$($1_MANIFEST_FILE) && \ + $(ECHO) Creating $$($1_NAME) && $(JAR) $$($1_JAR_CREATE_OPTIONS) $$@ $$($1_MANIFEST_FILE) && \ $$($1_SCAPTURE_CONTENTS) \ $$($1_SCAPTURE_METAINF) \ $$($1_SUPDATE_CONTENTS) \ @@ -311,6 +324,7 @@ $(if $7,$1_$(strip $7)) $(if $8,$1_$(strip $8)) $(if $9,$1_$(strip $9)) + $(if $(10),$(error Internal makefile error: Too many arguments to SetupZipArchive, please update JavaCompilation.gmk)) # Find all files in the source tree. $1_SUFFIX_FILTER := $$(patsubst %,-o -name $(DQUOTE)*%$(DQUOTE),$$($1_SUFFIXES)) @@ -648,6 +662,7 @@ $(if $(12),$1_$(strip $(12))) $(if $(13),$1_$(strip $(13))) $(if $(14),$1_$(strip $(14))) + $(if $(15),$(error Internal makefile error: Too many arguments to SetupJavaCompilation, please update JavaCompilation.gmk)) # Extract the info from the java compiler setup. $1_MODE := $$($$($1_SETUP)_MODE) @@ -688,6 +703,12 @@ # Now we have a list of all java files to compile: $$($1_SRCS) # and we have a list of all existing class files: $$($1_BINS) +# Create the corresponding smart javac wrapper command line. +$1_SJAVAC_ARGS:=$$(addprefix -x ,$$(addsuffix .*,$$(subst /,.,$$($1_EXCLUDES)))) \ +$$(addprefix -i ,$$(addsuffix .*,$$(subst /,.,$$($1_INCLUDES)))) \ +$$(addprefix -xf *,$$(strip $$($1_EXCLUDE_FILES))) \ +$$(addprefix -if *,$$(strip $$($1_INCLUDE_FILES))) -src $$(subst $$(SPACE),$$(PATH_SEP),$$(strip $$($1_SRC))) + # Prepend the source/bin path to the filter expressions. ifneq ($$($1_INCLUDES),) $1_SRC_INCLUDES := $$(foreach i,$$($1_SRC),$$(addprefix $$i/,$$(addsuffix /%,$$($1_INCLUDES)))) @@ -799,6 +820,12 @@ $(RM) $$($1_BIN)/_the.batch $$($1_BIN)/_the.batch.tmp $$(call ListPathsSafely,$1_SRCS,\n, >> $$($1_BIN)/_the.batch.tmp) $(ECHO) Compiling `$(WC) $$($1_BIN)/_the.batch.tmp | $(TR) -s ' ' | $(CUT) -f 2 -d ' '` files in batch $1 +ifeq ($$($1_NOSJAVAC),) +ifeq ($$(ENABLE_SJAVAC),yes) + mkdir -p $$($1_BIN)_sjavac + $$($1_JVM) $$(word 1,$$($1_JAVAC)) com.sun.tools.javac.smart.Main $$($1_SJAVAC_ARGS) -mfl $$($1_BIN)/_the.batch.tmp -d $$($1_BIN)_sjavac +endif +endif ($$($1_JVM) $$($1_JAVAC) $$($1_FLAGS) -implicit:none -sourcepath "$$($1_SRCROOTSC)" -d $$($1_BIN) $$($1_HEADERS_ARG) @$$($1_BIN)/_the.batch.tmp && \ $(MV) $$($1_BIN)/_the.batch.tmp $$($1_BIN)/_the.batch) else @@ -890,5 +917,3 @@ endif endef - - --- old/common/makefiles/MakeBase.gmk 2012-07-03 20:04:07.767902146 +0200 +++ new/common/makefiles/MakeBase.gmk 2012-07-03 20:04:07.657900518 +0200 @@ -138,6 +138,7 @@ # Hook to be called as the very first thing when running a normal build define AtRootMakeStart + $(if $(findstring -j,$(MAKEFLAGS)), $(error make -j is not supported, use make JOBS=n)) $(call PrintStartMessage) $(call StartTimer) endef --- old/common/makefiles/Makefile 2012-07-03 20:04:08.167908042 +0200 +++ new/common/makefiles/Makefile 2012-07-03 20:04:08.067906573 +0200 @@ -26,241 +26,128 @@ # This must be the first rule default: all -# Find out which variables were passed explicitely on the make command line. These -# will be passed on to sub-makes, overriding spec.gmk settings. -MAKE_ARGS=$(foreach var,$(subst =command,,$(filter %=command,$(foreach var,$(.VARIABLES),$(var)=$(firstword $(origin $(var)))))),$(var)=$($(var))) - -define fatal-error - # If the user specificed a "global" target (e.g. 'help'), do not exit but continue running - $$(if $$(findstring help,$$(MAKECMDGOALS)),,$$(error Cannot continue)) -endef - -ifeq ($(origin VERBOSE),undefined) - # Setup logging according to LOG (but only if VERBOSE is not given) - ifeq ($(LOG),) - # Set LOG to "warn" as default if not set (and no VERBOSE given) - LOG=warn - endif - ifeq ($(LOG),warn) - VERBOSE=-s - else ifeq ($(LOG),info) - VERBOSE= - else ifeq ($(LOG),debug) - VERBOSE= - else ifeq ($(LOG),trace) - VERBOSE=-d -p - else - $(info Error: LOG must be one of: warn, info, debug or trace.) - $(eval $(call fatal-error)) - endif -else - ifneq ($(LOG),) - # We have both a VERBOSE and a LOG argument. This is OK only if this is a repeated call by ourselves, - # but complain if this is the top-level make call. - ifeq ($(MAKELEVEL),0) - $(info Cannot use LOG=$(LOG) and VERBOSE=$(VERBOSE) at the same time. Choose one.) - $(eval $(call fatal-error)) - endif - endif -endif - -# TODO: Fix duplication in MakeBase.gmk -define SetupLogging - ifneq ($(findstring $(LOG),debug trace),) - # Shell redefinition trick inspired by http://www.cmcrossroads.com/ask-mr-make/6535-tracing-rule-execution-in-gnu-make - OLD_SHELL:=$$(SHELL) - SHELL = $$(warning Building $$@$$(if $$<, (from $$<))$(if $$?, ($$? newer)))$$(OLD_SHELL) -x - endif -endef - -$(eval $(call SetupLogging)) - -# Find all environment or command line variables that begin with ALT. -list_alt_overrides_with_origins = $(filter ALT_%=environment ALT_%=command,$(foreach var,$(.VARIABLES),$(var)=$(firstword $(origin $(var))))) -list_alt_overrides=$(subst =command,,$(subst =environment,,$(list_alt_overrides_with_origins))) - +# Locate this Makefile ifeq ($(filter /%,$(lastword $(MAKEFILE_LIST))),) - makefile_path=$(CURDIR)/$(lastword $(MAKEFILE_LIST)) + makefile_path:=$(CURDIR)/$(lastword $(MAKEFILE_LIST)) else - makefile_path=$(lastword $(MAKEFILE_LIST)) + makefile_path:=$(lastword $(MAKEFILE_LIST)) endif -root_dir=$(patsubst %/common/makefiles/Makefile,%,$(makefile_path)) -output_dir=$(root_dir)/build +root_dir:=$(patsubst %/common/makefiles/Makefile,%,$(makefile_path)) -ifneq ($(origin SPEC),undefined) - # We have been given a SPEC, check that it works out properly - ifeq ($(wildcard $(SPEC)),) - $(info Cannot locate spec.gmk, given by SPEC=$(SPEC)) - $(eval $(call fatal-error)) - endif - ifneq ($(origin CONF),undefined) - # We also have a CONF argument. This is OK only if this is a repeated call by ourselves, - # but complain if this is the top-level make call. - ifeq ($(MAKELEVEL),0) - $(info Cannot use CONF=$(CONF) and SPEC=$(SPEC) at the same time. Choose one.) - $(eval $(call fatal-error)) - endif - endif - # ... OK, we're satisfied, we'll use this SPEC later on -else - # Find all spec.gmk files in the build output directory - all_spec_files=$(wildcard $(output_dir)/*/spec.gmk) - ifeq ($(all_spec_files),) - $(info No configurations found for $(root_dir)! Please run configure to create a configuration.) - $(eval $(call fatal-error)) - endif - # Extract the configuration names from the path - all_confs=$(patsubst %/spec.gmk,%,$(patsubst $(output_dir)/%,%,$(all_spec_files))) +# ... and then we can include our helper functions +include $(dir $(makefile_path))/MakeHelpers.gmk - ifneq ($(origin CONF),undefined) - # User have given a CONF= argument. - ifeq ($(CONF),) - # If given CONF=, match all configurations - matching_confs=$(strip $(all_confs)) - else - # Otherwise select those that contain the given CONF string - matching_confs=$(strip $(foreach var,$(all_confs),$(if $(findstring $(CONF),$(var)),$(var)))) - endif - ifeq ($(matching_confs),) - $(info No configurations found matching CONF=$(CONF)) - $(info Available configurations:) - $(foreach var,$(all_confs),$(info * $(var))) - $(eval $(call fatal-error)) - else - ifeq ($(words $(matching_confs)),1) - $(info Building '$(matching_confs)' (matching CONF=$(CONF))) - else - $(info Building the following configurations (matching CONF=$(CONF)):) - $(foreach var,$(matching_confs),$(info * $(var))) - endif - endif - - # Create a SPEC definition. This will contain the path to one or more spec.gmk files. - SPEC=$(addsuffix /spec.gmk,$(addprefix $(output_dir)/,$(matching_confs))) - else - # No CONF or SPEC given, check the available configurations - ifneq ($(words $(all_spec_files)),1) - $(info No CONF or SPEC given, but more than one spec.gmk found in $(output_dir).) - $(info Available configurations:) - $(foreach var,$(all_confs),$(info * $(var))) - $(info Please retry building with CONF= or SPEC=) - $(eval $(call fatal-error)) - endif +$(eval $(call ParseLogLevel)) +$(eval $(call SetupLogging)) +$(eval $(call ParseConfAndSpec)) - # We found exactly one configuration, use it - SPEC=$(strip $(all_spec_files)) - endif +# Setup number of jobs to use. -jN is unfortunately not available for us to parse from the command line, +# hence this workaround. +ifeq ($(JOBS),) + JOBS=$(NUM_CORES) endif ifneq ($(words $(SPEC)),1) -# We have multiple configurations to build, call make repeatedly -all jdk hotspot jaxws jaxp corba langtools install images packages clean dist-clean: +### We have multiple configurations to build, call make repeatedly +all jdk hotspot jaxws jaxp corba langtools install images clean dist-clean: @$(foreach spec,$(SPEC),($(MAKE) -f $(makefile_path) SPEC=$(spec) $(VERBOSE) VERBOSE=$(VERBOSE) $@ $(MAKE_ARGS)) &&) true -.PHONY: all jdk hotspot jaxws jaxp corba langtools install images packages clean dist-clean +.PHONY: all jdk hotspot jaxws jaxp corba langtools install images clean dist-clean else -# This is the main part of the Makefile, for the normal case with SPEC specifying a single existing spec.gmk file. +### This is the main part of the Makefile, for the normal case with SPEC specifying a single existing spec.gmk file. # Now load the spec --include $(SPEC) +include $(SPEC) # Load the vital tools for all the makefiles. --include $(SRC_ROOT)/common/makefiles/MakeBase.gmk +include $(SRC_ROOT)/common/makefiles/MakeBase.gmk -# Remove any build.log from a previous run +### Clean up from previous run + +# Remove any build.log from a previous run, if they exist ifneq (,$(BUILD_LOG)) - $(shell $(RM) $(BUILD_LOG)) + ifneq (,$(BUILD_LOG_PREVIOUS)) + # Rotate old log + $(shell $(RM) $(BUILD_LOG_PREVIOUS) 2> /dev/null) + $(shell $(MV) $(BUILD_LOG) $(BUILD_LOG_PREVIOUS) 2> /dev/null) + else + $(shell $(RM) $(BUILD_LOG) 2> /dev/null) + endif endif - # Remove any javac server logs and port files. This # prevents a new make run to reuse the previous servers. ifneq (,$(JAVAC_SERVERS)) $(shell mkdir -p $(JAVAC_SERVERS) && rm -rf $(JAVAC_SERVERS)/*) endif -# Reset the build timers. -$(eval $(call ResetTimers)) # Clean out any notifications from the previous build. $(shell find $(OUTPUT_ROOT) -name "_the.*.notify" $(FIND_DELETE)) -# If make was called explicitely with -j, don't add a -j ourself to sub-makes, since -# this will be inherited automatically by make. Otherwise use our default for sub-makes. -# The -j in MAKEFLAGS is only visible when executing a recipe, hence this macro. -define GetMakeJobFlag - $(if $(findstring -j,$(MAKEFLAGS)),,-j$(NUM_CORES)) -endef - -define CheckEnvironment - $(if $(list_alt_overrides), - @$(PRINTF) "\nWARNING: You have the following ALT_ variables set:\n" - @$(PRINTF) "$(foreach var,$(list_alt_overrides),$(var)=$$$(var))\n" - @$(PRINTF) "ALT_ variables are deprecated and will be ignored. Please clean your environment.\n" - ) -endef - -define PrintStartMessage - $(if $(VERBOSE),,@$(ECHO) Running make as $(MAKE) $(MFLAGS) $(MAKE_ARGS)) - $(call CheckEnvironment) - @$(ECHO) "Building OpenJDK for target $(if $(MAKECMDGOALS),'$(MAKECMDGOALS)','all') in configuration '$(CONF_NAME)'" -endef - -define PrintEndMessage - @$(ECHO) "Finished building OpenJDK for target '$@'" - $(call CheckEnvironment) -endef +# Reset the build timers. +$(eval $(call ResetTimers)) + +### Main targets all: jdk @$(if $(JAVAC_SERVERS),rm -rf $(JAVAC_SERVERS)/*.port) @$(call AtRootMakeEnd) -langtools: start-make +langtools: start-make langtools-only +langtools-only: @$(call MakeStart,langtools,all) - @($(CD) $(LANGTOOLS_TOPDIR)/makefiles && $(BUILD_LOG_WRAPPER) $(MAKE) $(call GetMakeJobFlag) $(LANGTOOLS_MAKE_ARGS) $(MAKE_ARGS)) + @($(CD) $(LANGTOOLS_TOPDIR)/makefiles && $(BUILD_LOG_WRAPPER) $(MAKE) -j$(JOBS) $(MAKE_ARGS)) @$(call MakeFinish,langtools,all) -corba: langtools +corba: langtools corba-only +corba-only: @$(call MakeStart,corba,all) - @($(CD) $(CORBA_TOPDIR)/makefiles && $(BUILD_LOG_WRAPPER) $(MAKE) $(call GetMakeJobFlag) $(CORBA_MAKE_ARGS) $(MAKE_ARGS)) + @($(CD) $(CORBA_TOPDIR)/makefiles && $(BUILD_LOG_WRAPPER) $(MAKE) -j$(JOBS) $(MAKE_ARGS)) @$(call MakeFinish,corba,all) -jaxp: langtools +jaxp: langtools jaxp-only +jaxp-only: @$(call MakeStart,jaxp,all) - @($(CD) $(JAXP_TOPDIR)/makefiles && $(BUILD_LOG_WRAPPER) $(MAKE) $(call GetMakeJobFlag) $(CORBA_MAKE_ARGS) $(MAKE_ARGS)) + @($(CD) $(JAXP_TOPDIR)/makefiles && $(BUILD_LOG_WRAPPER) $(MAKE) -j$(JOBS) $(MAKE_ARGS)) @$(call MakeFinish,jaxp,all) -jaxws: langtools jaxp +jaxws: langtools jaxp jaxws-only +jaxws-only: @$(call MakeStart,jaxws,all) - @($(CD) $(JAXWS_TOPDIR)/makefiles && $(BUILD_LOG_WRAPPER) $(MAKE) $(call GetMakeJobFlag) $(CORBA_MAKE_ARGS) $(MAKE_ARGS)) + @($(CD) $(JAXWS_TOPDIR)/makefiles && $(BUILD_LOG_WRAPPER) $(MAKE) -j$(JOBS) $(MAKE_ARGS)) @$(call MakeFinish,jaxws,all) -hotspot: langtools +hotspot: langtools hotspot-only +hotspot-only: @$(call MakeStart,hotspot,all) @($(CD) $(HOTSPOT_TOPDIR)/make && $(BUILD_LOG_WRAPPER) $(MAKE) -j1 $(HOTSPOT_MAKE_ARGS) $(MAKE_ARGS)) @$(call MakeFinish,hotspot,all) -jdk: langtools corba jaxp jaxws hotspot +jdk: langtools corba jaxp jaxws hotspot jdk-only +jdk-only: @$(call MakeStart,jdk,all) - @($(CD) $(JDK_TOPDIR)/makefiles && $(BUILD_LOG_WRAPPER) $(MAKE) $(call GetMakeJobFlag) $(JDK_MAKE_ARGS) $(MAKE_ARGS)) + @($(CD) $(JDK_TOPDIR)/makefiles && $(BUILD_LOG_WRAPPER) $(MAKE) -j$(JOBS) $(MAKE_ARGS)) @$(call MakeFinish,jdk,all) -images install packages: source-tips start-make jdk langtools corba jaxp jaxws hotspot +images: source-tips start-make jdk langtools corba jaxp jaxws hotspot images-only +images-only: @$(call MakeStart,jdk-images,$@) - @($(CD) $(JDK_TOPDIR)/makefiles && $(BUILD_LOG_WRAPPER) $(MAKE) $(call GetMakeJobFlag) $(JDK_MAKE_ARGS) $(MAKE_ARGS) $@) + @($(CD) $(JDK_TOPDIR)/makefiles && $(BUILD_LOG_WRAPPER) $(MAKE) -j$(JOBS) $(JDK_MAKE_ARGS) $(MAKE_ARGS) images) @$(call MakeFinish,jdk-images,$@) @$(if $(JAVAC_SERVERS),rm -rf $(JAVAC_SERVERS)/*.port) @$(call AtRootMakeEnd) -old-images: source-tips start-make jdk langtools corba jaxp jaxws hotspot - @$(call MakeStart,jdk-old-images,$@) - @($(CD) $(JDK_TOPDIR)/makefiles && $(BUILD_LOG_WRAPPER) $(MAKE) $(call GetMakeJobFlag) $(JDK_MAKE_ARGS) $(MAKE_ARGS) $@) - @$(call MakeFinish,old-jdk-images,$@) +install: source-tips start-make jdk langtools corba jaxp jaxws hotspot install-only +install-only: + @$(call MakeStart,jdk-images,$@) + @($(CD) $(JDK_TOPDIR)/makefiles && $(BUILD_LOG_WRAPPER) $(MAKE) -j$(JOBS) $(JDK_MAKE_ARGS) $(MAKE_ARGS) install) + @$(call MakeFinish,jdk-images,$@) @$(if $(JAVAC_SERVERS),rm -rf $(JAVAC_SERVERS)/*.port) @$(call AtRootMakeEnd) start-make: @$(call AtRootMakeStart) -.PHONY: jdk hotspot jaxws jaxp corba langtools install images packages start-make +.PHONY: jdk hotspot jaxws jaxp corba langtools install images start-make test: start-make @$(call MakeStart,test,$(if $(TEST),$(TEST),all)) @@ -281,7 +168,7 @@ # Remove everything, except the output from configure. clean: - @(cd $(OUTPUT_ROOT) && $(RM) -r `$(LS) $(OUTPUT_ROOT) | grep -v spec.gmk | grep -v Makefile | grep -v config.status | grep -v config.log | grep -v config.h | grep -v configure-arguments | grep -v "localdevenv.*" | grep -v uncygdrive.exe`) + @(cd $(OUTPUT_ROOT) && $(RM) -r `$(LS) $(OUTPUT_ROOT) | grep -v spec.gmk | grep -v spec.sh | grep -v Makefile | grep -v config.status | grep -v config.log | grep -v config.h | grep -v configure-arguments | grep -v "localdevenv.*" | grep -v uncygdrive.exe`) @$(ECHO) Cleaned everything except the build configuration. .PHONY: clean @@ -292,7 +179,7 @@ .PHONY: dist-clean clean-jdk: - @(cd $(OUTPUT_ROOT) && $(RM) -r `$(LS) $(OUTPUT_ROOT) | grep -v spec.gmk | grep -v Makefile | grep -v config.status | grep -v config.log | grep -v config.h | grep -v configure-arguments | \ + @(cd $(OUTPUT_ROOT) && $(RM) -r `$(LS) $(OUTPUT_ROOT) | grep -v spec.gmk | grep -v spec.sh | grep -v Makefile | grep -v config.status | grep -v config.log | grep -v config.h | grep -v configure-arguments | \ grep -v langtools | grep -v corba | grep -v jaxp | grep -v jaxws | grep -v hotspot`) @$(ECHO) "Cleaned jdk build artifacts (but not langtools,corba,jaxp,jaxws,hotspot nor the build configuration)" .PHONY: clean --- old/common/makefiles/NativeCompilation.gmk 2012-07-03 20:04:08.597914379 +0200 +++ new/common/makefiles/NativeCompilation.gmk 2012-07-03 20:04:08.477912619 +0200 @@ -51,47 +51,55 @@ # param 5 = the c compiler # param 6 = the c++ flags to the compiler # param 7 = the c++ compiler + # param 8 = the flags to the assembler ifneq (,$$(filter %.c,$2)) # Compile as a C file - $1_$2_FLAGS=$4 $$($1_$(notdir $2)_CFLAGS) + $1_$2_FLAGS=$4 $$($1_$(notdir $2)_CFLAGS) -c $1_$2_COMP=$5 $1_$2_DEP_FLAG:=$(C_FLAG_DEPS) else ifneq (,$$(filter %.m,$2)) # Compile as a objective-c file - $1_$2_FLAGS=-x objective-c $4 $$($1_$(notdir $2)_CFLAGS) + $1_$2_FLAGS=-x objective-c $4 $$($1_$(notdir $2)_CFLAGS) -c $1_$2_COMP=$5 $1_$2_DEP_FLAG:=$(C_FLAG_DEPS) + else ifneq (,$$(filter %.s,$2)) + # Compile as assembler file + $1_$2_FLAGS=$8 + $1_$2_COMP=$(AS) + $1_$2_DEP_FLAG:= else # Compile as a C++ file - $1_$2_FLAGS=$6 $$($1_$(notdir $2)_CXXFLAGS) + $1_$2_FLAGS=$6 $$($1_$(notdir $2)_CXXFLAGS) -c $1_$2_COMP=$7 $1_$2_DEP_FLAG:=$(CXX_FLAG_DEPS) endif # Generate the .o (.obj) file name and place it in the bin dir. - $1_$2_OBJ:=$3/$$(patsubst %.cpp,%$(OBJ_SUFFIX),$$(patsubst %.c,%$(OBJ_SUFFIX),$$(patsubst %.m,%$(OBJ_SUFFIX),$$(notdir $2)))) + $1_$2_OBJ:=$3/$$(patsubst %.cpp,%$(OBJ_SUFFIX),$$(patsubst %.c,%$(OBJ_SUFFIX),$$(patsubst %.m,%$(OBJ_SUFFIX),$$(patsubst %.s,%$(OBJ_SUFFIX),$$(notdir $2))))) # Only continue if this object file hasn't been processed already. This lets the first found # source file override any other with the same name. ifeq (,$$(findstring $$($1_$2_OBJ),$$($1_OBJS_SO_FAR))) $1_OBJS_SO_FAR+=$$($1_$2_OBJ) - # And this is the dependency file for this obj file. - $1_$2_DEP:=$$(patsubst %$(OBJ_SUFFIX),%.d,$$($1_$2_OBJ)) - # Include previously generated dependency information. (if it exists) - -include $$($1_$2_DEP) - - ifeq ($(COMPILER_TYPE),CL) - $1_$2_DEBUG_OUT_FLAGS:=-Fd$$(patsubst %$(OBJ_SUFFIX),%.pdb,$$($1_$2_OBJ)) \ - -Fm$$(patsubst %$(OBJ_SUFFIX),%.map,$$($1_$2_OBJ)) + ifeq (,$$(filter %.s,$2)) + # And this is the dependency file for this obj file. + $1_$2_DEP:=$$(patsubst %$(OBJ_SUFFIX),%.d,$$($1_$2_OBJ)) + # Include previously generated dependency information. (if it exists) + -include $$($1_$2_DEP) + + ifeq ($(COMPILER_TYPE),CL) + $1_$2_DEBUG_OUT_FLAGS:=-Fd$$(patsubst %$(OBJ_SUFFIX),%.pdb,$$($1_$2_OBJ)) \ + -Fm$$(patsubst %$(OBJ_SUFFIX),%.map,$$($1_$2_OBJ)) + endif endif $$($1_$2_OBJ) : $2 ifeq ($(COMPILER_TYPE),CC) $$(call COMPILING_MSG,$$(notdir $2)) - $$($1_$2_COMP) $$($1_$2_FLAGS) $$($1_$2_DEP_FLAG) $$($1_$2_DEP) -c $(CC_OUT_OPTION)$$($1_$2_OBJ) $2 + $$($1_$2_COMP) $$($1_$2_FLAGS) $$($1_$2_DEP_FLAG) $$($1_$2_DEP) $(CC_OUT_OPTION)$$($1_$2_OBJ) $2 endif ifeq ($(COMPILER_TYPE),CL) $$(call COMPILING_MSG,$$(notdir $2)) - $$($1_$2_COMP) $$($1_$2_FLAGS) $$($1_$2_DEBUG_OUT_FLAGS) -c $(CC_OUT_OPTION)$$($1_$2_OBJ) $2 + $$($1_$2_COMP) $$($1_$2_FLAGS) $$($1_$2_DEBUG_OUT_FLAGS) $(CC_OUT_OPTION)$$($1_$2_OBJ) $2 endif endif endef @@ -107,9 +115,9 @@ # LDFLAGS_SUFFIX the linker flags to be added last on the commandline # typically the libraries linked to. # ARFLAGS the archiver flags to be used - # BIN the directory where we store the object files - # LIB the resulting library file - # EXE the resulting exec file + # OBJECT_DIR the directory where we store the object files + # LIBRARY the resulting library file + # PROGRAM the resulting exec file # INCLUDES only pick source from these directories # EXCLUDES do not pick source from these directories # INCLUDE_FILES only compile exactly these files! @@ -118,6 +126,9 @@ # RC_FLAGS flags for RC. # MAPFILE mapfile # REORDER reorder file + # DEBUG_SYMBOLS add debug symbols (if configured on) + # CC the compiler to use, default is $(CC) + # LDEXE the linker to use for linking executables, default is $(LDEXE) $(if $2,$1_$(strip $2)) $(if $3,$1_$(strip $3)) $(if $4,$1_$(strip $4)) @@ -137,13 +148,94 @@ $(if $(18),$1_$(strip $(18))) $(if $(19),$1_$(strip $(19))) $(if $(20),$1_$(strip $(20))) + $(if $(21),$1_$(strip $(21))) + $(if $(22),$(error Internal makefile error: Too many arguments to SetupNativeCompilation, please update NativeCompilation.gmk)) + + ifneq (,$$($1_BIN)) + $$(error BIN has been replaced with OBJECT_DIR) + endif + + ifneq (,$$($1_LIB)) + $$(error LIB has been replaced with LIBRARY) + endif + + ifneq (,$$($1_EXE)) + $$(error EXE has been replaced with PROGRAM) + endif + + ifneq (,$$($1_LIBRARY)) + ifeq (,$$($1_OUTPUT_DIR)) + $$(error LIBRARY requires OUTPUT_DIR) + endif + + ifneq ($$($1_LIBRARY),$(basename $$($1_LIBRARY))) + $$(error directory of LIBRARY should be specified using OUTPUT_DIR) + endif + + ifneq (,$(findstring $(SHARED_LIBRARY_SUFFIX),$$($1_LIBRARY))) + $$(error LIBRARY should be specified without SHARED_LIBRARY_SUFFIX: $(SHARED_LIBRARY_SUFFIX)) + endif + + ifneq (,$(findstring $(LIBRARY_PREFIX),$$($1_LIBRARY))) + $$(error LIBRARY should be specified without LIBRARY_PREFIX: $(LIBRARY_PREFIX)) + endif + + $1_BASENAME:=$(LIBRARY_PREFIX)$$($1_LIBRARY)$(SHARED_LIBRARY_SUFFIX) + $1_TARGET:=$$($1_OUTPUT_DIR)/$$($1_BASENAME) + + endif + + ifneq (,$$($1_STATIC_LIBRARY)) + ifeq (,$$($1_OUTPUT_DIR)) + $$(error STATIC_LIBRARY requires OUTPUT_DIR) + endif + + ifneq ($$($1_STATIC_LIBRARY),$(basename $$($1_STATIC_LIBRARY))) + $$(error directory of STATIC_LIBRARY should be specified using OUTPUT_DIR) + endif + + ifneq (,$(findstring $(STATIC_LIBRARY_SUFFIX),$$($1_STATIC_LIBRARY))) + $$(error STATIC_LIBRARY should be specified without STATIC_LIBRARY_SUFFIX: $(STATIC_LIBRARY_SUFFIX)) + endif + + ifneq (,$(findstring $(LIBRARY_PREFIX),$$($1_STATIC_LIBRARY))) + $$(error STATIC_LIBRARY should be specified without LIBRARY_PREFIX: $(LIBRARY_PREFIX)) + endif + + $1_BASENAME:=$(LIBRARY_PREFIX)$$($1_STATIC_LIBRARY)$(STATIC_LIBRARY_SUFFIX) + $1_TARGET:=$$($1_OUTPUT_DIR)/$$($1_BASENAME) + endif + + ifneq (,$$($1_PROGRAM)) + ifeq (,$$($1_OUTPUT_DIR)) + $$(error PROGRAM requires OUTPUT_DIR) + endif + + ifneq ($$($1_PROGRAM),$(basename $$($1_PROGRAM))) + $$(error directory of PROGRAM should be specified using OUTPUT_DIR) + endif + + ifneq (,$(findstring $(EXE_SUFFIX),$$($1_PROGRAM))) + $$(error PROGRAM should be specified without EXE_SUFFIX: $(EXE_SUFFIX)) + endif + + $1_BASENAME:=$$($1_PROGRAM)$(EXE_SUFFIX) + $1_TARGET:=$$($1_OUTPUT_DIR)/$$($1_BASENAME) + + endif + + ifeq (,$$($1_TARGET)) + $$(error Neither PROGRAM, LIBRARY nor STATIC_LIBRARY has been specified for SetupNativeCompilation) + endif ifeq (,$$($1_LANG)) $$(error You have to specify LANG for native compilation $1) endif ifeq (C,$$($1_LANG)) + ifeq ($$($1_LDEXE),) + $1_LDEXE:=$(LDEXE) + endif $1_LD:=$(LD) - $1_LDEXE:=$(LDEXE) else ifeq (C++,$$($1_LANG)) $1_LD:=$(LDCXX) @@ -153,8 +245,12 @@ endif endif + ifeq ($$($1_CC),) + $1_CC:=$(CC) + endif + # Make sure the dirs exist. - $$(shell $(MKDIR) -p $$($1_SRC) $$($1_BIN) $$(dir $$($1_LIB)) $$(dir $$($1_EXE))) + $$(shell $(MKDIR) -p $$($1_SRC) $$($1_OBJECT_DIR) $$($1_OUTPUT_DIR)) # Find all files in the source trees. Sort to remove duplicates. $1_ALL_SRCS := $$(sort $$(foreach i,$$($1_SRC), $$(shell $(FIND) $$i -type f))) # Extract the C/C++ files. @@ -163,7 +259,7 @@ ifneq ($$($1_EXCLUDE_FILES),) $1_EXCLUDE_FILES:=$$(addprefix %,$$($1_EXCLUDE_FILES)) endif - $1_SRCS := $$(filter-out $$($1_EXCLUDE_FILES),$$(filter %.c %.cpp %.m,$$($1_ALL_SRCS))) + $1_SRCS := $$(filter-out $$($1_EXCLUDE_FILES),$$(filter %.s %.c %.cpp %.m,$$($1_ALL_SRCS))) ifneq (,$$(strip $$($1_INCLUDE_FILES))) $1_SRCS := $$(filter $$($1_INCLUDE_FILES),$$($1_SRCS)) endif @@ -171,7 +267,7 @@ $$(error No sources found for $1 when looking inside the dirs $$($1_SRC)) endif # There can be only a single bin dir root, no need to foreach over the roots. - $1_BINS := $$(wildcard $$($1_BIN)/*$(OBJ_SUFFIX)) + $1_BINS := $$(wildcard $$($1_OBJECT_DIR)/*$(OBJ_SUFFIX)) # Now we have a list of all c/c++ files to compile: $$($1_SRCS) # and we have a list of all existing object files: $$($1_BINS) @@ -187,37 +283,36 @@ # Calculate the expected output from compiling the sources (sort to remove duplicates. Also provides # a reproducable order on the input files to the linker). - $1_EXPECTED_OBJS:=$$(sort $$(addprefix $$($1_BIN)/,$$(patsubst %.cpp,%$(OBJ_SUFFIX),$$(patsubst %.c,%$(OBJ_SUFFIX),$$(patsubst %.m,%$(OBJ_SUFFIX),$$(notdir $$($1_SRCS))))))) - $1 := $$($1_EXPECTED_OBJS) + $1_EXPECTED_OBJS:=$$(sort $$(addprefix $$($1_OBJECT_DIR)/,$$(patsubst %.cpp,%$(OBJ_SUFFIX),$$(patsubst %.c,%$(OBJ_SUFFIX),$$(patsubst %.m,%$(OBJ_SUFFIX),$$(patsubst %.s,%$(OBJ_SUFFIX),$$(notdir $$($1_SRCS)))))))) # Are there too many object files on disk? Perhaps because some source file was removed? $1_SUPERFLOUS_OBJS:=$$(sort $$(filter-out $$($1_EXPECTED_OBJS),$$($1_BINS))) # Clean out the superfluous object files. $$(shell $(RM) -f $$($1_SUPERFLUOUS_OBJS)) - # Pickup extra HOST_OS_API and/or PLATFORM dependent variables for CFLAGS. - $1_EXTRA_CFLAGS:=$$($1_CFLAGS_$(HOST_OS_API)) $$($1_CFLAGS_$(PLATFORM)) + # Pickup extra OPENJDK_TARGET_OS_API and/or OPENJDK_TARGET_OS dependent variables for CFLAGS. + $1_EXTRA_CFLAGS:=$$($1_CFLAGS_$(OPENJDK_TARGET_OS_API)) $$($1_CFLAGS_$(OPENJDK_TARGET_OS)) ifneq ($(DEBUG_LEVEL),release) # Pickup extra debug dependent variables for CFLAGS $1_EXTRA_CFLAGS+=$$($1_CFLAGS_debug) - $1_EXTRA_CFLAGS+=$$($1_CFLAGS_$(HOST_OS_API)_debug) - $1_EXTRA_CFLAGS+=$$($1_CFLAGS_$(PLATFORM)_debug) + $1_EXTRA_CFLAGS+=$$($1_CFLAGS_$(OPENJDK_TARGET_OS_API)_debug) + $1_EXTRA_CFLAGS+=$$($1_CFLAGS_$(OPENJDK_TARGET_OS)_debug) else $1_EXTRA_CFLAGS+=$$($1_CFLAGS_release) - $1_EXTRA_CFLAGS+=$$($1_CFLAGS_$(HOST_OS_API)_release) - $1_EXTRA_CFLAGS+=$$($1_CFLAGS_$(PLATFORM)_release) + $1_EXTRA_CFLAGS+=$$($1_CFLAGS_$(OPENJDK_TARGET_OS_API)_release) + $1_EXTRA_CFLAGS+=$$($1_CFLAGS_$(OPENJDK_TARGET_OS)_release) endif - # Pickup extra HOST_OS_API and/or PLATFORM dependent variables for CXXFLAGS. - $1_EXTRA_CXXFLAGS:=$$($1_CXXFLAGS_$(HOST_OS_API)) $$($1_CXXFLAGS_$(PLATFORM)) + # Pickup extra OPENJDK_TARGET_OS_API and/or OPENJDK_TARGET_OS dependent variables for CXXFLAGS. + $1_EXTRA_CXXFLAGS:=$$($1_CXXFLAGS_$(OPENJDK_TARGET_OS_API)) $$($1_CXXFLAGS_$(OPENJDK_TARGET_OS)) ifneq ($(DEBUG_LEVEL),release) # Pickup extra debug dependent variables for CXXFLAGS $1_EXTRA_CXXFLAGS+=$$($1_CXXFLAGS_debug) - $1_EXTRA_CXXFLAGS+=$$($1_CXXFLAGS_$(HOST_OS_API)_debug) - $1_EXTRA_CXXFLAGS+=$$($1_CXXFLAGS_$(PLATFORM)_debug) + $1_EXTRA_CXXFLAGS+=$$($1_CXXFLAGS_$(OPENJDK_TARGET_OS_API)_debug) + $1_EXTRA_CXXFLAGS+=$$($1_CXXFLAGS_$(OPENJDK_TARGET_OS)_debug) else $1_EXTRA_CXXFLAGS+=$$($1_CXXFLAGS_release) - $1_EXTRA_CXXFLAGS+=$$($1_CXXFLAGS_$(HOST_OS_API)_release) - $1_EXTRA_CXXFLAGS+=$$($1_CXXFLAGS_$(PLATFORM)_release) + $1_EXTRA_CXXFLAGS+=$$($1_CXXFLAGS_$(OPENJDK_TARGET_OS_API)_release) + $1_EXTRA_CXXFLAGS+=$$($1_CXXFLAGS_$(OPENJDK_TARGET_OS)_release) endif ifeq ($$($1_CXXFLAGS),) @@ -232,33 +327,62 @@ $1_EXTRA_CXXFLAGS += $$(CXX_FLAG_REORDER) endif + ifneq (no, $(ENABLE_DEBUG_SYMBOLS)) + ifneq ($(OPENJDK_TARGET_OS), solaris) +# +# There is very weird code in Defs-solaris.gmk that first sets variables as decribed below +# and then a couple of hundreds of line below resets them... +# this feels like a sure bug...but before this is confirmed, mimic this behaviour +# (note: skip indenting this as it will surely be removed anyway) +# + + ifneq (,$$($1_DEBUG_SYMBOLS)) + $1_OPTIMIZATION := LOW + $1_EXTRA_CFLAGS += $(CFLAGS_DEBUG_SYMBOLS) + $1_EXTRA_CXXFLAGS += $(CXXFLAGS_DEBUG_SYMBOLS) + endif + +# + endif +# + endif + + ifeq (NONE, $$($1_OPTIMIZATION)) + $1_EXTRA_CFLAGS += $$(C_O_FLAG_NONE) + $1_EXTRA_CXXFLAGS += $$(CXX_O_FLAG_NONE) + else ifeq (LOW, $$($1_OPTIMIZATION)) + $1_EXTRA_CFLAGS += $$(C_O_FLAG_NORM) + $1_EXTRA_CXXFLAGS += $$(CXX_O_FLAG_NORM) + else ifeq (HIGH, $$($1_OPTIMIZATION)) + $1_EXTRA_CFLAGS += $$(C_O_FLAG_HI) + $1_EXTRA_CXXFLAGS += $$(CXX_O_FLAG_HI) + else ifeq (HIGHEST, $$($1_OPTIMIZATION)) + $1_EXTRA_CFLAGS += $$(C_O_FLAG_HIGHEST) + $1_EXTRA_CXXFLAGS += $$(CXX_O_FLAG_HIGHEST) + else ifneq (, $$($1_OPTIMIZATION)) + $$(error Unknown value for OPTIMIZATION: $$($1_OPTIMIZATION)) + endif + # Now create a list of the packages that are about to compile. Used when sending source # in a batch to the compiler. - $$(shell $(RM) $$($1_BIN)/_the.list_of_sources) - $$(eval $$(call ListPathsSafelyNow,$1_SRCS,\n, >> $$($1_BIN)/_the.list_of_sources)) + $$(shell $(RM) $$($1_OBJECT_DIR)/_the.list_of_sources) + $$(eval $$(call ListPathsSafelyNow,$1_SRCS,\n, >> $$($1_OBJECT_DIR)/_the.list_of_sources)) # Now call add_native_source for each source file we are going to compile. $$(foreach p,$$($1_SRCS),\ - $$(eval $$(call add_native_source,$1,$$p,$$($1_BIN),\ - $$($1_CFLAGS) $$($1_EXTRA_CFLAGS),$(CC),\ - $$($1_CXXFLAGS) $$($1_EXTRA_CXXFLAGS),$(CXX)))) + $$(eval $$(call add_native_source,$1,$$p,$$($1_OBJECT_DIR),\ + $$($1_CFLAGS) $$($1_EXTRA_CFLAGS),$$($1_CC),\ + $$($1_CXXFLAGS) $$($1_EXTRA_CXXFLAGS),$(CXX),$$($1_ASFLAGS)))) # On windows we need to create a resource file - ifeq ($(HOST_OS_API), winapi) + ifeq ($(OPENJDK_TARGET_OS_API), winapi) ifneq (,$$($1_VERSIONINFO_RESOURCE)) - ifneq (,$$($1_LIB)) - $1_BASENAME:=$$(basename $$(notdir $$($1_LIB))) - endif - ifneq (,$$($1_EXE)) - $1_BASENAME:=$$(basename $$(notdir $$($1_EXE))) - endif - $1_RES:=$$($1_BIN)/$$($1_BASENAME).res + $1_RES:=$$($1_OBJECT_DIR)/$$($1_BASENAME).res $$($1_RES): $$($1_VERSIONINFO_RESOURCE) $(RC) $$($1_RC_FLAGS) $(CC_OUT_OPTION)$$@ $$($1_VERSIONINFO_RESOURCE) endif ifneq (,$$($1_MANIFEST)) - $1_PROGRAM:=$$(basename $$(notdir $$($1_EXE))) - $1_GEN_MANIFEST:=$$($1_BIN)/$$($1_PROGRAM).manifest + $1_GEN_MANIFEST:=$$($1_OBJECT_DIR)/$$($1_PROGRAM).manifest IMVERSIONVALUE:=$(JDK_MINOR_VERSION).$(JDK_MICRO_VERSION).$(JDK_UPDATE_VERSION).$(COOKED_BUILD_NUMBER) $$($1_GEN_MANIFEST): $$($1_MANIFEST) $(SED) 's%IMVERSION%$$(IMVERSIONVALUE)%g;s%PROGRAM%$$($1_PROGRAM)%g' $$< > $$@ @@ -266,54 +390,182 @@ endif # mapfile doesnt seem to be implemented on macosx (yet??) - ifneq ($(HOST_OS),macosx) - ifneq ($(HOST_OS),windows) - $1_REAL_MAPFILE := $$($1_MAPFILE) + ifneq ($(OPENJDK_TARGET_CPU),ppc) + ifneq ($(OPENJDK_TARGET_CPU),arm) + ifneq ($(OPENJDK_TARGET_OS),macosx) + ifneq ($(OPENJDK_TARGET_OS),windows) + $1_REAL_MAPFILE:=$$($1_MAPFILE) ifneq (,$$($1_REORDER)) - $1_REAL_MAPFILE := $$($1_BIN)/mapfile + $1_REAL_MAPFILE:=$$($1_OBJECT_DIR)/mapfile $$($1_REAL_MAPFILE) : $$($1_MAPFILE) $$($1_REORDER) $$(MKDIR) -p $$(@D) $$(CP) $$($1_MAPFILE) $$@.tmp - $$(SED) -e 's=OUTPUTDIR=$$($1_BIN)=' $$($1_REORDER) >> $$@.tmp + $$(SED) -e 's=OUTPUTDIR=$$($1_OBJECT_DIR)=' $$($1_REORDER) >> $$@.tmp $$(MV) $$@.tmp $$@ endif endif endif + endif + endif - # Pickup extra HOST_OS_API dependent variables (posix or winapi) and + # Pickup extra OPENJDK_TARGET_OS_API dependent variables (posix or winapi) and # (linux,solaris,windows,bsd) for LDFLAGS and LDFLAGS_SUFFIX - $1_EXTRA_LDFLAGS:=$$($1_LDFLAGS_$(HOST_OS_API)) $$($1_LDFLAGS_$(PLATFORM)) - $1_EXTRA_LDFLAGS_SUFFIX:=$$($1_LDFLAGS_SUFFIX_$(HOST_OS_API)) $$($1_LDFLAGS_SUFFIX_$(PLATFORM)) + $1_EXTRA_LDFLAGS:=$$($1_LDFLAGS_$(OPENJDK_TARGET_OS_API)) $$($1_LDFLAGS_$(OPENJDK_TARGET_OS)) + $1_EXTRA_LDFLAGS_SUFFIX:=$$($1_LDFLAGS_SUFFIX_$(OPENJDK_TARGET_OS_API)) $$($1_LDFLAGS_SUFFIX_$(OPENJDK_TARGET_OS)) ifneq (,$$($1_REAL_MAPFILE)) - $1_EXTRA_LDFLAGS += $(call SET_SHARED_LIBRARY_MAPFILE,$$($1_REAL_MAPFILE)) + $1_EXTRA_LDFLAGS += $(call SET_SHARED_LIBRARY_MAPFILE,$$($1_REAL_MAPFILE)) endif - ifneq (,$$($1_LIB)) - ifeq (dynamic,$$(patsubst %$(SHARED_LIBRARY_SUFFIX),dynamic,$$($1_LIB))) - # Generating a dynamic library. - $1_EXTRA_LDFLAGS+=$$(call SET_SHARED_LIBRARY_NAME,$$(notdir $$($1_LIB))) - $$($1_LIB) : $$($1_EXPECTED_OBJS) $$($1_RES) $$($1_REAL_MAPFILE) - $$(call LINKING_MSG,$$(notdir $$($1_LIB))) - $$($1_LD) $$($1_LDFLAGS) $$($1_EXTRA_LDFLAGS) $(LD_OUT_OPTION)$$($1_LIB) \ - $$($1_EXPECTED_OBJS) $$($1_RES) $$($1_LDFLAGS_SUFFIX) $$($1_EXTRA_LDFLAGS_SUFFIX) - else - # Generating a static library, ie object file archive. - $$($1_LIB) : $$($1_EXPECTED_OBJS) $$($1_RES) - $$(call ARCHIVING_MSG,$$(notdir $$($1_LIB))) - $(AR) $$($1_AR_FLAGS) $(AR_OUT_OPTION)$$($1_LIB) $$($1_EXPECTED_OBJS) \ + $1 := $$($1_TARGET) + ifneq (,$$($1_LIBRARY)) + # Generating a dynamic library. + $1_EXTRA_LDFLAGS+=$$(call SET_SHARED_LIBRARY_NAME,$$($1_BASENAME)) + ifeq ($(OPENJDK_TARGET_OS), windows) + $1_EXTRA_LDFLAGS+="-implib:$$($1_OBJECT_DIR)/$$($1_LIBRARY).lib" + endif + + ifneq (,$$($1_DEBUG_SYMBOLS)) + ifeq ($(ENABLE_DEBUG_SYMBOLS), yes) + ifeq ($(OPENJDK_TARGET_OS), windows) + $1_EXTRA_LDFLAGS+="-pdb:$$($1_OBJECT_DIR)/$$($1_LIBRARY).pdb" \ + "-map:$$($1_OBJECT_DIR)/$$($1_LIBRARY).map" + endif + + $$($1_OUTPUT_DIR)/% : $$($1_OBJECT_DIR)/% + $(CP) $$< $$@ + + + ifeq ($(OPENJDK_TARGET_OS), solaris) + # gobjcopy crashes on "empty" section headers with the SHF_ALLOC flag set. + # Use $(FIX_EMPTY_SEC_HDR_FLAGS) to clear the SHF_ALLOC flag (if set) from + # empty section headers until a fixed $(OBJCOPY) is available. + # An empty section header has sh_addr == 0 and sh_size == 0. + # This problem has only been seen on Solaris X64, but we call this tool + # on all Solaris builds just in case. + # + # $(OBJCOPY) --add-gnu-debuglink=... corrupts SUNW_* sections. + # Use $(ADD_GNU_DEBUGLINK) until a fixed $(OBJCOPY) is available. + $$($1_OBJECT_DIR)/$$(LIBRARY_PREFIX)$$($1_LIBRARY).debuginfo : $$($1_TARGET) \ + $(FIX_EMPTY_SEC_HDR_FLAGS) $(ADD_GNU_DEBUGLINK) + $(RM) $$@ + $(FIX_EMPTY_SEC_HDR_FLAGS) $$< + $(OBJCOPY) --only-keep-debug $$< $$@ + $(ADD_GNU_DEBUGLINK) $$@ $$< + else # not solaris + $$($1_OBJECT_DIR)/$$(LIBRARY_PREFIX)$$($1_LIBRARY).debuginfo : $$($1_TARGET) + $(RM) $$@ + $(OBJCOPY) --only-keep-debug $$< $$@ + $(OBJCOPY) --add-gnu-debuglink=$$@ $$< + endif + + ifeq ($(ZIP_DEBUGINFO_FILES), 1) + $1 += $$($1_OUTPUT_DIR)/$$(LIBRARY_PREFIX)$$($1_LIBRARY).diz + + ifeq ($(OPENJDK_TARGET_OS), windows) + $$($1_OBJECT_DIR)/$$(LIBRARY_PREFIX)$$($1_LIBRARY).diz : $$($1_TARGET) + $(CD) $$($1_OBJECT_DIR) \ + && $(ZIP) -q $$@ $$($1_LIBRARY).map $$($1_LIBRARY).pdb + else + $$($1_OBJECT_DIR)/$$(LIBRARY_PREFIX)$$($1_LIBRARY).diz : $$($1_TARGET) \ + $$($1_OBJECT_DIR)/$$(LIBRARY_PREFIX)$$($1_LIBRARY).debuginfo + $(CD) $$($1_OBJECT_DIR) \ + && $(ZIP) -q $$@ $$(LIBRARY_PREFIX)$$($1_LIBRARY).debuginfo + endif + else + ifeq ($(OPENJDK_TARGET_OS), windows) + $1 += $$($1_OUTPUT_DIR)/$$($1_LIBRARY).map \ + $$($1_OUTPUT_DIR)/$$($1_LIBRARY).pdb + else + $1 += $$($1_OUTPUT_DIR)/$$(LIBRARY_PREFIX)$$($1_LIBRARY).debuginfo + endif + endif + endif + endif + + $$($1_TARGET) : $$($1_EXPECTED_OBJS) $$($1_RES) $$($1_REAL_MAPFILE) + $$(call LINKING_MSG,$$($1_BASENAME)) + $$($1_LD) $$($1_LDFLAGS) $$($1_EXTRA_LDFLAGS) $(LD_OUT_OPTION)$$@ \ + $$($1_EXPECTED_OBJS) $$($1_RES) $$($1_LDFLAGS_SUFFIX) \ + $$($1_EXTRA_LDFLAGS_SUFFIX) + + endif + + ifneq (,$$($1_STATIC_LIBRARY)) + # Generating a static library, ie object file archive. + $$($1_TARGET) : $$($1_EXPECTED_OBJS) $$($1_RES) + $$(call ARCHIVING_MSG,$$($1_LIBRARY)) + $(AR) $$($1_AR_FLAGS) $(AR_OUT_OPTION)$$($1_TARGET) $$($1_EXPECTED_OBJS) \ $$($1_RES) $$($1_LDFLAGS_SUFFIX) $$($1_EXTRA_LDFLAGS_SUFFIX) - endif endif - ifneq (,$$($1_EXE)) + + ifneq (,$$($1_PROGRAM)) # A executable binary has been specified, setup the target for it. - $$($1_EXE) : $$($1_EXPECTED_OBJS) $$($1_RES) $$($1_GEN_MANIFEST) - $$(call LINKING_EXE_MSG,$$(notdir $$($1_EXE))) - $$($1_LDEXE) $$($1_LDFLAGS) $$($1_EXTRA_LDFLAGS) $(EXE_OUT_OPTION)$$($1_EXE) \ + ifneq (,$$($1_DEBUG_SYMBOLS)) + ifeq ($(ENABLE_DEBUG_SYMBOLS), yes) + ifeq ($(OPENJDK_TARGET_OS), windows) + $1_EXTRA_LDFLAGS+="-pdb:$$($1_OBJECT_DIR)/$$($1_PROGRAM).pdb" \ + "-map:$$($1_OBJECT_DIR)/$$($1_PROGRAM).map" + endif + + $$($1_OUTPUT_DIR)/% : $$($1_OBJECT_DIR)/% + $(CP) $$< $$@ + + ifeq ($(OPENJDK_TARGET_OS), solaris) + # gobjcopy crashes on "empty" section headers with the SHF_ALLOC flag set. + # Use $(FIX_EMPTY_SEC_HDR_FLAGS) to clear the SHF_ALLOC flag (if set) from + # empty section headers until a fixed $(OBJCOPY) is available. + # An empty section header has sh_addr == 0 and sh_size == 0. + # This problem has only been seen on Solaris X64, but we call this tool + # on all Solaris builds just in case. + # + # $(OBJCOPY) --add-gnu-debuglink=... corrupts SUNW_* sections. + # Use $(ADD_GNU_DEBUGLINK) until a fixed $(OBJCOPY) is available. + $$($1_OBJECT_DIR)/$$($1_PROGRAM).debuginfo : $$($1_TARGET) \ + $(FIX_EMPTY_SEC_HDR_FLAGS) $(ADD_GNU_DEBUGLINK) + $(RM) $$@ + $(FIX_EMPTY_SEC_HDR_FLAGS) $$< + $(OBJCOPY) --only-keep-debug $$< $$@ + $(ADD_GNU_DEBUGLINK) $$@ $$< + else # not solaris + $$($1_OBJECT_DIR)/$$($1_PROGRAM).debuginfo : $$($1_TARGET) + $(RM) $$@ + $(OBJCOPY) --only-keep-debug $$< $$@ + $(OBJCOPY) --add-gnu-debuglink=$$@ $$< + endif + + ifeq ($(ZIP_DEBUGINFO_FILES), 1) + $1 += $$($1_OUTPUT_DIR)/$$($1_PROGRAM).diz + + ifeq ($(OPENJDK_TARGET_OS), windows) + $$($1_OBJECT_DIR)/$$($1_PROGRAM).diz : $$($1_TARGET) + $(CD) $$($1_OBJECT_DIR) \ + && $(ZIP) -q $$@ $$($1_PROGRAM).map $$($1_PROGRAM).pdb + else + $$($1_OBJECT_DIR)/$$(PROGRAM_PREFIX)$$($1_PROGRAM).diz : $$($1_TARGET) \ + $$($1_OBJECT_DIR)/$$($1_PROGRAM).debuginfo + $(CD) $$($1_OBJECT_DIR) \ + && $(ZIP) -q $$@ $$($1_PROGRAM).debuginfo + endif + else + ifeq ($(OPENJDK_TARGET_OS), windows) + $1 += $$($1_OUTPUT_DIR)/$$($1_PROGRAM).map \ + $$($1_OUTPUT_DIR)/$$($1_PROGRAM).pdb + else + $1 += $$($1_OUTPUT_DIR)/$$($1_PROGRAM).debuginfo + endif + endif + endif + endif + + $$($1_TARGET) : $$($1_EXPECTED_OBJS) $$($1_RES) $$($1_GEN_MANIFEST) + $$(call LINKING_EXE_MSG,$$($1_BASENAME)) + $$($1_LDEXE) $$($1_LDFLAGS) $$($1_EXTRA_LDFLAGS) $(EXE_OUT_OPTION)$$($1_TARGET) \ $$($1_EXPECTED_OBJS) $$($1_RES) $$($1_LDFLAGS_SUFFIX) \ $$($1_EXTRA_LDFLAGS_SUFFIX) ifneq (,$$($1_GEN_MANIFEST)) $(MT) -nologo /manifest $$($1_GEN_MANIFEST) /outputresource:$$@;#1 endif + endif endef --- old/common/autoconf/cores.m4 2012-07-03 20:04:09.007920421 +0200 +++ /dev/null 2012-06-05 09:41:31.162991907 +0200 @@ -1,103 +0,0 @@ -# -# Copyright (c) 2011, 2012, Oracle and/or its affiliates. All rights reserved. -# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. -# -# This code is free software; you can redistribute it and/or modify it -# under the terms of the GNU General Public License version 2 only, as -# published by the Free Software Foundation. Oracle designates this -# particular file as subject to the "Classpath" exception as provided -# by Oracle in the LICENSE file that accompanied this code. -# -# This code is distributed in the hope that it will be useful, but WITHOUT -# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -# version 2 for more details (a copy is included in the LICENSE file that -# accompanied this code). -# -# You should have received a copy of the GNU General Public License version -# 2 along with this work; if not, write to the Free Software Foundation, -# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. -# -# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA -# or visit www.oracle.com if you need additional information or have any -# questions. -# - -AC_DEFUN([CHECK_CORES], -[ - AC_MSG_CHECKING([for number of cores]) - NUM_CORES=1 - FOUND_CORES=no - - if test -f /proc/cpuinfo; then - # Looks like a Linux system - NUM_CORES=`cat /proc/cpuinfo | grep -c processor` - FOUND_CORES=yes - fi - - if test -x /usr/sbin/psrinfo; then - # Looks like a Solaris system - NUM_CORES=`LC_MESSAGES=C /usr/sbin/psrinfo -v | grep -c on-line` - FOUND_CORES=yes - fi - - if test -x /usr/sbin/system_profiler; then - # Looks like a MacOSX system - NUM_CORES=`/usr/sbin/system_profiler -detailLevel full SPHardwareDataType | grep 'Cores' | awk '{print [$]5}'` - FOUND_CORES=yes - fi - - if test "x$build_os" = xwindows; then - NUM_CORES=4 - fi - - # For c/c++ code we run twice as many concurrent build - # jobs than we have cores, otherwise we will stall on io. - CONCURRENT_BUILD_JOBS=`expr $NUM_CORES \* 2` - - if test "x$FOUND_CORES" = xyes; then - AC_MSG_RESULT([$NUM_CORES]) - else - AC_MSG_RESULT([could not detect number of cores, defaulting to 1!]) - fi - -]) - -AC_DEFUN([CHECK_MEMORY_SIZE], -[ - AC_MSG_CHECKING([for memory size]) - # Default to 1024MB - MEMORY_SIZE=1024 - FOUND_MEM=no - - if test -f /proc/cpuinfo; then - # Looks like a Linux system - MEMORY_SIZE=`cat /proc/meminfo | grep MemTotal | awk '{print [$]2}'` - MEMORY_SIZE=`expr $MEMORY_SIZE / 1024` - FOUND_MEM=yes - fi - - if test -x /usr/sbin/prtconf; then - # Looks like a Solaris system - MEMORY_SIZE=`/usr/sbin/prtconf | grep "Memory size" | awk '{ print [$]3 }'` - FOUND_MEM=yes - fi - - if test -x /usr/sbin/system_profiler; then - # Looks like a MacOSX system - MEMORY_SIZE=`/usr/sbin/system_profiler -detailLevel full SPHardwareDataType | grep 'Memory' | awk '{print [$]2}'` - MEMORY_SIZE=`expr $MEMORY_SIZE \* 1024` - FOUND_MEM=yes - fi - - if test "x$build_os" = xwindows; then - MEMORY_SIZE=`systeminfo | grep 'Total Physical Memory:' | awk '{ print [$]4 }' | sed 's/,//'` - FOUND_MEM=yes - fi - - if test "x$FOUND_MEM" = xyes; then - AC_MSG_RESULT([$MEMORY_SIZE MB]) - else - AC_MSG_RESULT([could not detect memory size defaulting to 1024MB!]) - fi -]) --- old/common/makefiles/RMICompile.gmk 2012-07-03 20:04:09.247923965 +0200 +++ /dev/null 2012-06-05 09:41:31.162991907 +0200 @@ -1,103 +0,0 @@ -# -# Copyright (c) 2011, 2012 Oracle and/or its affiliates. All rights reserved. -# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. -# -# This code is free software; you can redistribute it and/or modify it -# under the terms of the GNU General Public License version 2 only, as -# published by the Free Software Foundation. Oracle designates this -# particular file as subject to the "Classpath" exception as provided -# by Oracle in the LICENSE file that accompanied this code. -# -# This code is distributed in the hope that it will be useful, but WITHOUT -# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -# version 2 for more details (a copy is included in the LICENSE file that -# accompanied this code). -# -# You should have received a copy of the GNU General Public License version -# 2 along with this work; if not, write to the Free Software Foundation, -# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. -# -# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA -# or visit www.oracle.com if you need additional information or have any -# questions. -# - -define SetupRMICompilation - # param 1 is a name for a variable to depend on. - # param 2 and up are named args. - # CLASSES:=List of classes to generate stubs for - # CLASSES_DIR:=Directory where to look for classes - # STUB_CLASSES_DIR:=Directory in where to put stub classes - # RUN_V11:=Set to run rmic with -v1.1 - # RUN_V12:=Set to run rmic with -v1.2 - # RUN_IIOP:=Set to run rmic with -iiop - # RUN_IIOP_STDPKG:=Set to run rmic with -iiop -standardPackage - # KEEP_GENERATED:=Set to keep generated sources around - $(if $2,$1_$(strip $2)) - $(if $3,$1_$(strip $3)) - $(if $4,$1_$(strip $4)) - $(if $5,$1_$(strip $5)) - $(if $6,$1_$(strip $6)) - $(if $7,$1_$(strip $7)) - $(if $8,$1_$(strip $8)) - $(if $9,$1_$(strip $9)) - - - $1_DEP_FILE := $$($1_STUB_CLASSES_DIR)/$1_rmic - - $1_CLASSES_SLASH := $$(subst .,/,$$($1_CLASSES)) - $1_CLASS_FILES := $$(addprefix $$($1_CLASSES_DIR)/,$$(addsuffix .class,$$($1_CLASSES_SLASH))) - $1_STUB_FILES := $$(addprefix $$($1_STUB_CLASSES_DIR)/,$$(addsuffix _Stub.class,$$($1_CLASSES_SLASH))) - $1_TARGETS := $$($1_STUB_FILES) - $1_ARGS := - ifneq (,$$($1_RUN_V11)) - $1_SKEL_FILES := $$(addprefix $$($1_STUB_CLASSES_DIR)/,$$(addsuffix _Skel.class,$$($1_CLASSES_SLASH))) - $1_TARGETS += $$($1_SKEL_FILES) - $1_ARGS += -v1.1 - endif - ifneq (,$$($1_RUN_V12)) - $1_ARGS += -v1.2 - endif - - $1_TIE_BASE_FILES := $$(foreach f,$$($1_CLASSES_SLASH),$$(dir $$f)_$$(notdir $$f)) - $1_TIE_FILES := $$(addprefix $$($1_STUB_CLASSES_DIR)/org/omg/stub/,$$(addsuffix _Tie.class,$$($1_TIE_BASE_FILES))) - $1_TIE_STDPKG_FILES := $$(addprefix $$($1_STUB_CLASSES_DIR)/,$$(addsuffix _Tie.class,$$($1_TIE_BASE_FILES))) - - ifneq (,$$($1_RUN_IIOP)) - $1_TARGETS += $$($1_TIE_FILES) - $1_ARGS += -iiop - endif - ifneq (,$$($1_RUN_IIOP_STDPKG)) - $1_TARGETS += $$($1_TIE_STDPKG_FILES) - $1_ARGS2 := -iiop -standardPackage - endif - - ifneq (,$$($1_KEEP_GENERATED)) - $1_ARGS += -keepgenerated - $1_TARGETS += $$(subst .class,.java,$$($1_TARGETS)) - endif - - $1_DOLLAR_SAFE_CLASSES := $$(subst $$$$,\$$$$,$$($1_CLASSES)) - - $$($1_TARGETS): $$($1_DEP_FILE) $$($1_CLASS_FILES) - - $$($1_DEP_FILE): $$($1_CLASS_FILES) - $(MKDIR) -p $$($1_STUB_CLASSES_DIR) - if [ "x$$($1_ARGS)" != "x" ]; then \ - $(ECHO) Running rmic $$($1_ARGS) for $$($1_DOLLAR_SAFE_CLASSES) &&\ - $(RMIC) $$($1_ARGS) -classpath "$$($1_CLASSES_DIR)" \ - -d $$($1_STUB_CLASSES_DIR) $$($1_DOLLAR_SAFE_CLASSES);\ - fi; - if [ "x$$($1_ARGS2)" != "x" ]; then \ - $(ECHO) Running rmic $$($1_ARGS2) for $$($1_DOLLAR_SAFE_CLASSES) &&\ - $(RMIC) $$($1_ARGS2) -classpath "$$($1_CLASSES_DIR)" \ - -d $$($1_STUB_CLASSES_DIR) $$($1_DOLLAR_SAFE_CLASSES);\ - fi; - - - $1 := $$($1_TARGETS) - - # By marking as secondary, this "touch" file doesn't need to be touched and will never exist. - .SECONDARY: $$($1_DEP_FILE) -endef