1 /* 2 * Copyright (c) 2003, 2015, Oracle and/or its affiliates. All rights reserved. 3 * Copyright (c) 2014, 2015, Red Hat Inc. All rights reserved. 4 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. 5 * 6 * This code is free software; you can redistribute it and/or modify it 7 * under the terms of the GNU General Public License version 2 only, as 8 * published by the Free Software Foundation. 9 * 10 * This code is distributed in the hope that it will be useful, but WITHOUT 11 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 12 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License 13 * version 2 for more details (a copy is included in the LICENSE file that 14 * accompanied this code). 15 * 16 * You should have received a copy of the GNU General Public License version 17 * 2 along with this work; if not, write to the Free Software Foundation, 18 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. 19 * 20 * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA 21 * or visit www.oracle.com if you need additional information or have any 22 * questions. 23 * 24 */ 25 26 #include "precompiled.hpp" 27 #include "asm/macroAssembler.hpp" 28 #include "asm/macroAssembler.inline.hpp" 29 #include "code/debugInfoRec.hpp" 30 #include "code/icBuffer.hpp" 31 #include "code/vtableStubs.hpp" 32 #include "interpreter/interpreter.hpp" 33 #include "interpreter/interp_masm.hpp" 34 #include "oops/compiledICHolder.hpp" 35 #include "prims/jvmtiRedefineClassesTrace.hpp" 36 #include "runtime/sharedRuntime.hpp" 37 #include "runtime/vframeArray.hpp" 38 #include "vmreg_aarch64.inline.hpp" 39 #ifdef COMPILER1 40 #include "c1/c1_Runtime1.hpp" 41 #endif 42 #ifdef COMPILER2 43 #include "adfiles/ad_aarch64.hpp" 44 #include "opto/runtime.hpp" 45 #endif 46 47 #ifdef BUILTIN_SIM 48 #include "../../../../../../simulator/simulator.hpp" 49 #endif 50 51 #define __ masm-> 52 53 const int StackAlignmentInSlots = StackAlignmentInBytes / VMRegImpl::stack_slot_size; 54 55 class SimpleRuntimeFrame { 56 57 public: 58 59 // Most of the runtime stubs have this simple frame layout. 60 // This class exists to make the layout shared in one place. 61 // Offsets are for compiler stack slots, which are jints. 62 enum layout { 63 // The frame sender code expects that rbp will be in the "natural" place and 64 // will override any oopMap setting for it. We must therefore force the layout 65 // so that it agrees with the frame sender code. 66 // we don't expect any arg reg save area so aarch64 asserts that 67 // frame::arg_reg_save_area_bytes == 0 68 rbp_off = 0, 69 rbp_off2, 70 return_off, return_off2, 71 framesize 72 }; 73 }; 74 75 // FIXME -- this is used by C1 76 class RegisterSaver { 77 public: 78 static OopMap* save_live_registers(MacroAssembler* masm, int additional_frame_words, int* total_frame_words); 79 static void restore_live_registers(MacroAssembler* masm); 80 81 // Offsets into the register save area 82 // Used by deoptimization when it is managing result register 83 // values on its own 84 85 static int r0_offset_in_bytes(void) { return (32 + r0->encoding()) * wordSize; } 86 static int reg_offset_in_bytes(Register r) { return r0_offset_in_bytes() + r->encoding() * wordSize; } 87 static int rmethod_offset_in_bytes(void) { return reg_offset_in_bytes(rmethod); } 88 static int rscratch1_offset_in_bytes(void) { return (32 + rscratch1->encoding()) * wordSize; } 89 static int v0_offset_in_bytes(void) { return 0; } 90 static int return_offset_in_bytes(void) { return (32 /* floats*/ + 31 /* gregs*/) * wordSize; } 91 92 // During deoptimization only the result registers need to be restored, 93 // all the other values have already been extracted. 94 static void restore_result_registers(MacroAssembler* masm); 95 96 // Capture info about frame layout 97 enum layout { 98 fpu_state_off = 0, 99 fpu_state_end = fpu_state_off+FPUStateSizeInWords-1, 100 // The frame sender code expects that rfp will be in 101 // the "natural" place and will override any oopMap 102 // setting for it. We must therefore force the layout 103 // so that it agrees with the frame sender code. 104 r0_off = fpu_state_off+FPUStateSizeInWords, 105 rfp_off = r0_off + 30 * 2, 106 return_off = rfp_off + 2, // slot for return address 107 reg_save_size = return_off + 2}; 108 109 }; 110 111 OopMap* RegisterSaver::save_live_registers(MacroAssembler* masm, int additional_frame_words, int* total_frame_words) { 112 int frame_size_in_bytes = round_to(additional_frame_words*wordSize + 113 reg_save_size*BytesPerInt, 16); 114 // OopMap frame size is in compiler stack slots (jint's) not bytes or words 115 int frame_size_in_slots = frame_size_in_bytes / BytesPerInt; 116 // The caller will allocate additional_frame_words 117 int additional_frame_slots = additional_frame_words*wordSize / BytesPerInt; 118 // CodeBlob frame size is in words. 119 int frame_size_in_words = frame_size_in_bytes / wordSize; 120 *total_frame_words = frame_size_in_words; 121 122 // Save registers, fpu state, and flags. 123 124 __ enter(); 125 __ push_CPU_state(); 126 127 // Set an oopmap for the call site. This oopmap will map all 128 // oop-registers and debug-info registers as callee-saved. This 129 // will allow deoptimization at this safepoint to find all possible 130 // debug-info recordings, as well as let GC find all oops. 131 132 OopMapSet *oop_maps = new OopMapSet(); 133 OopMap* oop_map = new OopMap(frame_size_in_slots, 0); 134 135 for (int i = 0; i < RegisterImpl::number_of_registers; i++) { 136 Register r = as_Register(i); 137 if (r < rheapbase && r != rscratch1 && r != rscratch2) { 138 int sp_offset = 2 * (i + 32); // SP offsets are in 4-byte words, 139 // register slots are 8 bytes 140 // wide, 32 floating-point 141 // registers 142 oop_map->set_callee_saved(VMRegImpl::stack2reg(sp_offset), 143 r->as_VMReg()); 144 } 145 } 146 147 for (int i = 0; i < FloatRegisterImpl::number_of_registers; i++) { 148 FloatRegister r = as_FloatRegister(i); 149 int sp_offset = 2 * i; 150 oop_map->set_callee_saved(VMRegImpl::stack2reg(sp_offset), 151 r->as_VMReg()); 152 } 153 154 return oop_map; 155 } 156 157 void RegisterSaver::restore_live_registers(MacroAssembler* masm) { 158 __ pop_CPU_state(); 159 __ leave(); 160 } 161 162 void RegisterSaver::restore_result_registers(MacroAssembler* masm) { 163 164 // Just restore result register. Only used by deoptimization. By 165 // now any callee save register that needs to be restored to a c2 166 // caller of the deoptee has been extracted into the vframeArray 167 // and will be stuffed into the c2i adapter we create for later 168 // restoration so only result registers need to be restored here. 169 170 // Restore fp result register 171 __ ldrd(v0, Address(sp, v0_offset_in_bytes())); 172 // Restore integer result register 173 __ ldr(r0, Address(sp, r0_offset_in_bytes())); 174 175 // Pop all of the register save are off the stack 176 __ add(sp, sp, round_to(return_offset_in_bytes(), 16)); 177 } 178 179 // Is vector's size (in bytes) bigger than a size saved by default? 180 // 16 bytes XMM registers are saved by default using fxsave/fxrstor instructions. 181 bool SharedRuntime::is_wide_vector(int size) { 182 return size > 16; 183 } 184 // The java_calling_convention describes stack locations as ideal slots on 185 // a frame with no abi restrictions. Since we must observe abi restrictions 186 // (like the placement of the register window) the slots must be biased by 187 // the following value. 188 static int reg2offset_in(VMReg r) { 189 // Account for saved rfp and lr 190 // This should really be in_preserve_stack_slots 191 return (r->reg2stack() + 4) * VMRegImpl::stack_slot_size; 192 } 193 194 static int reg2offset_out(VMReg r) { 195 return (r->reg2stack() + SharedRuntime::out_preserve_stack_slots()) * VMRegImpl::stack_slot_size; 196 } 197 198 template <class T> static const T& min (const T& a, const T& b) { 199 return (a > b) ? b : a; 200 } 201 202 // --------------------------------------------------------------------------- 203 // Read the array of BasicTypes from a signature, and compute where the 204 // arguments should go. Values in the VMRegPair regs array refer to 4-byte 205 // quantities. Values less than VMRegImpl::stack0 are registers, those above 206 // refer to 4-byte stack slots. All stack slots are based off of the stack pointer 207 // as framesizes are fixed. 208 // VMRegImpl::stack0 refers to the first slot 0(sp). 209 // and VMRegImpl::stack0+1 refers to the memory word 4-byes higher. Register 210 // up to RegisterImpl::number_of_registers) are the 64-bit 211 // integer registers. 212 213 // Note: the INPUTS in sig_bt are in units of Java argument words, 214 // which are 64-bit. The OUTPUTS are in 32-bit units. 215 216 // The Java calling convention is a "shifted" version of the C ABI. 217 // By skipping the first C ABI register we can call non-static jni 218 // methods with small numbers of arguments without having to shuffle 219 // the arguments at all. Since we control the java ABI we ought to at 220 // least get some advantage out of it. 221 222 int SharedRuntime::java_calling_convention(const BasicType *sig_bt, 223 VMRegPair *regs, 224 int total_args_passed, 225 int is_outgoing) { 226 227 // Create the mapping between argument positions and 228 // registers. 229 static const Register INT_ArgReg[Argument::n_int_register_parameters_j] = { 230 j_rarg0, j_rarg1, j_rarg2, j_rarg3, j_rarg4, j_rarg5, j_rarg6, j_rarg7 231 }; 232 static const FloatRegister FP_ArgReg[Argument::n_float_register_parameters_j] = { 233 j_farg0, j_farg1, j_farg2, j_farg3, 234 j_farg4, j_farg5, j_farg6, j_farg7 235 }; 236 237 238 uint int_args = 0; 239 uint fp_args = 0; 240 uint stk_args = 0; // inc by 2 each time 241 242 for (int i = 0; i < total_args_passed; i++) { 243 switch (sig_bt[i]) { 244 case T_BOOLEAN: 245 case T_CHAR: 246 case T_BYTE: 247 case T_SHORT: 248 case T_INT: 249 if (int_args < Argument::n_int_register_parameters_j) { 250 regs[i].set1(INT_ArgReg[int_args++]->as_VMReg()); 251 } else { 252 regs[i].set1(VMRegImpl::stack2reg(stk_args)); 253 stk_args += 2; 254 } 255 break; 256 case T_VOID: 257 // halves of T_LONG or T_DOUBLE 258 assert(i != 0 && (sig_bt[i - 1] == T_LONG || sig_bt[i - 1] == T_DOUBLE), "expecting half"); 259 regs[i].set_bad(); 260 break; 261 case T_LONG: 262 assert(sig_bt[i + 1] == T_VOID, "expecting half"); 263 // fall through 264 case T_OBJECT: 265 case T_ARRAY: 266 case T_ADDRESS: 267 if (int_args < Argument::n_int_register_parameters_j) { 268 regs[i].set2(INT_ArgReg[int_args++]->as_VMReg()); 269 } else { 270 regs[i].set2(VMRegImpl::stack2reg(stk_args)); 271 stk_args += 2; 272 } 273 break; 274 case T_FLOAT: 275 if (fp_args < Argument::n_float_register_parameters_j) { 276 regs[i].set1(FP_ArgReg[fp_args++]->as_VMReg()); 277 } else { 278 regs[i].set1(VMRegImpl::stack2reg(stk_args)); 279 stk_args += 2; 280 } 281 break; 282 case T_DOUBLE: 283 assert(sig_bt[i + 1] == T_VOID, "expecting half"); 284 if (fp_args < Argument::n_float_register_parameters_j) { 285 regs[i].set2(FP_ArgReg[fp_args++]->as_VMReg()); 286 } else { 287 regs[i].set2(VMRegImpl::stack2reg(stk_args)); 288 stk_args += 2; 289 } 290 break; 291 default: 292 ShouldNotReachHere(); 293 break; 294 } 295 } 296 297 return round_to(stk_args, 2); 298 } 299 300 // Patch the callers callsite with entry to compiled code if it exists. 301 static void patch_callers_callsite(MacroAssembler *masm) { 302 Label L; 303 __ ldr(rscratch1, Address(rmethod, in_bytes(Method::code_offset()))); 304 __ cbz(rscratch1, L); 305 306 __ enter(); 307 __ push_CPU_state(); 308 309 // VM needs caller's callsite 310 // VM needs target method 311 // This needs to be a long call since we will relocate this adapter to 312 // the codeBuffer and it may not reach 313 314 #ifndef PRODUCT 315 assert(frame::arg_reg_save_area_bytes == 0, "not expecting frame reg save area"); 316 #endif 317 318 __ mov(c_rarg0, rmethod); 319 __ mov(c_rarg1, lr); 320 __ lea(rscratch1, RuntimeAddress(CAST_FROM_FN_PTR(address, SharedRuntime::fixup_callers_callsite))); 321 __ blrt(rscratch1, 2, 0, 0); 322 __ maybe_isb(); 323 324 __ pop_CPU_state(); 325 // restore sp 326 __ leave(); 327 __ bind(L); 328 } 329 330 static void gen_c2i_adapter(MacroAssembler *masm, 331 int total_args_passed, 332 int comp_args_on_stack, 333 const BasicType *sig_bt, 334 const VMRegPair *regs, 335 Label& skip_fixup) { 336 // Before we get into the guts of the C2I adapter, see if we should be here 337 // at all. We've come from compiled code and are attempting to jump to the 338 // interpreter, which means the caller made a static call to get here 339 // (vcalls always get a compiled target if there is one). Check for a 340 // compiled target. If there is one, we need to patch the caller's call. 341 patch_callers_callsite(masm); 342 343 __ bind(skip_fixup); 344 345 int words_pushed = 0; 346 347 // Since all args are passed on the stack, total_args_passed * 348 // Interpreter::stackElementSize is the space we need. 349 350 int extraspace = total_args_passed * Interpreter::stackElementSize; 351 352 __ mov(r13, sp); 353 354 // stack is aligned, keep it that way 355 extraspace = round_to(extraspace, 2*wordSize); 356 357 if (extraspace) 358 __ sub(sp, sp, extraspace); 359 360 // Now write the args into the outgoing interpreter space 361 for (int i = 0; i < total_args_passed; i++) { 362 if (sig_bt[i] == T_VOID) { 363 assert(i > 0 && (sig_bt[i-1] == T_LONG || sig_bt[i-1] == T_DOUBLE), "missing half"); 364 continue; 365 } 366 367 // offset to start parameters 368 int st_off = (total_args_passed - i - 1) * Interpreter::stackElementSize; 369 int next_off = st_off - Interpreter::stackElementSize; 370 371 // Say 4 args: 372 // i st_off 373 // 0 32 T_LONG 374 // 1 24 T_VOID 375 // 2 16 T_OBJECT 376 // 3 8 T_BOOL 377 // - 0 return address 378 // 379 // However to make thing extra confusing. Because we can fit a long/double in 380 // a single slot on a 64 bt vm and it would be silly to break them up, the interpreter 381 // leaves one slot empty and only stores to a single slot. In this case the 382 // slot that is occupied is the T_VOID slot. See I said it was confusing. 383 384 VMReg r_1 = regs[i].first(); 385 VMReg r_2 = regs[i].second(); 386 if (!r_1->is_valid()) { 387 assert(!r_2->is_valid(), ""); 388 continue; 389 } 390 if (r_1->is_stack()) { 391 // memory to memory use rscratch1 392 int ld_off = (r_1->reg2stack() * VMRegImpl::stack_slot_size 393 + extraspace 394 + words_pushed * wordSize); 395 if (!r_2->is_valid()) { 396 // sign extend?? 397 __ ldrw(rscratch1, Address(sp, ld_off)); 398 __ str(rscratch1, Address(sp, st_off)); 399 400 } else { 401 402 __ ldr(rscratch1, Address(sp, ld_off)); 403 404 // Two VMREgs|OptoRegs can be T_OBJECT, T_ADDRESS, T_DOUBLE, T_LONG 405 // T_DOUBLE and T_LONG use two slots in the interpreter 406 if ( sig_bt[i] == T_LONG || sig_bt[i] == T_DOUBLE) { 407 // ld_off == LSW, ld_off+wordSize == MSW 408 // st_off == MSW, next_off == LSW 409 __ str(rscratch1, Address(sp, next_off)); 410 #ifdef ASSERT 411 // Overwrite the unused slot with known junk 412 __ mov(rscratch1, 0xdeadffffdeadaaaaul); 413 __ str(rscratch1, Address(sp, st_off)); 414 #endif /* ASSERT */ 415 } else { 416 __ str(rscratch1, Address(sp, st_off)); 417 } 418 } 419 } else if (r_1->is_Register()) { 420 Register r = r_1->as_Register(); 421 if (!r_2->is_valid()) { 422 // must be only an int (or less ) so move only 32bits to slot 423 // why not sign extend?? 424 __ str(r, Address(sp, st_off)); 425 } else { 426 // Two VMREgs|OptoRegs can be T_OBJECT, T_ADDRESS, T_DOUBLE, T_LONG 427 // T_DOUBLE and T_LONG use two slots in the interpreter 428 if ( sig_bt[i] == T_LONG || sig_bt[i] == T_DOUBLE) { 429 // long/double in gpr 430 #ifdef ASSERT 431 // Overwrite the unused slot with known junk 432 __ mov(rscratch1, 0xdeadffffdeadaaabul); 433 __ str(rscratch1, Address(sp, st_off)); 434 #endif /* ASSERT */ 435 __ str(r, Address(sp, next_off)); 436 } else { 437 __ str(r, Address(sp, st_off)); 438 } 439 } 440 } else { 441 assert(r_1->is_FloatRegister(), ""); 442 if (!r_2->is_valid()) { 443 // only a float use just part of the slot 444 __ strs(r_1->as_FloatRegister(), Address(sp, st_off)); 445 } else { 446 #ifdef ASSERT 447 // Overwrite the unused slot with known junk 448 __ mov(rscratch1, 0xdeadffffdeadaaacul); 449 __ str(rscratch1, Address(sp, st_off)); 450 #endif /* ASSERT */ 451 __ strd(r_1->as_FloatRegister(), Address(sp, next_off)); 452 } 453 } 454 } 455 456 __ mov(esp, sp); // Interp expects args on caller's expression stack 457 458 __ ldr(rscratch1, Address(rmethod, in_bytes(Method::interpreter_entry_offset()))); 459 __ br(rscratch1); 460 } 461 462 463 static void gen_i2c_adapter(MacroAssembler *masm, 464 int total_args_passed, 465 int comp_args_on_stack, 466 const BasicType *sig_bt, 467 const VMRegPair *regs) { 468 469 // Note: r13 contains the senderSP on entry. We must preserve it since 470 // we may do a i2c -> c2i transition if we lose a race where compiled 471 // code goes non-entrant while we get args ready. 472 473 // In addition we use r13 to locate all the interpreter args because 474 // we must align the stack to 16 bytes. 475 476 // Adapters are frameless. 477 478 // An i2c adapter is frameless because the *caller* frame, which is 479 // interpreted, routinely repairs its own esp (from 480 // interpreter_frame_last_sp), even if a callee has modified the 481 // stack pointer. It also recalculates and aligns sp. 482 483 // A c2i adapter is frameless because the *callee* frame, which is 484 // interpreted, routinely repairs its caller's sp (from sender_sp, 485 // which is set up via the senderSP register). 486 487 // In other words, if *either* the caller or callee is interpreted, we can 488 // get the stack pointer repaired after a call. 489 490 // This is why c2i and i2c adapters cannot be indefinitely composed. 491 // In particular, if a c2i adapter were to somehow call an i2c adapter, 492 // both caller and callee would be compiled methods, and neither would 493 // clean up the stack pointer changes performed by the two adapters. 494 // If this happens, control eventually transfers back to the compiled 495 // caller, but with an uncorrected stack, causing delayed havoc. 496 497 if (VerifyAdapterCalls && 498 (Interpreter::code() != NULL || StubRoutines::code1() != NULL)) { 499 #if 0 500 // So, let's test for cascading c2i/i2c adapters right now. 501 // assert(Interpreter::contains($return_addr) || 502 // StubRoutines::contains($return_addr), 503 // "i2c adapter must return to an interpreter frame"); 504 __ block_comment("verify_i2c { "); 505 Label L_ok; 506 if (Interpreter::code() != NULL) 507 range_check(masm, rax, r11, 508 Interpreter::code()->code_start(), Interpreter::code()->code_end(), 509 L_ok); 510 if (StubRoutines::code1() != NULL) 511 range_check(masm, rax, r11, 512 StubRoutines::code1()->code_begin(), StubRoutines::code1()->code_end(), 513 L_ok); 514 if (StubRoutines::code2() != NULL) 515 range_check(masm, rax, r11, 516 StubRoutines::code2()->code_begin(), StubRoutines::code2()->code_end(), 517 L_ok); 518 const char* msg = "i2c adapter must return to an interpreter frame"; 519 __ block_comment(msg); 520 __ stop(msg); 521 __ bind(L_ok); 522 __ block_comment("} verify_i2ce "); 523 #endif 524 } 525 526 // Cut-out for having no stack args. 527 int comp_words_on_stack = round_to(comp_args_on_stack*VMRegImpl::stack_slot_size, wordSize)>>LogBytesPerWord; 528 if (comp_args_on_stack) { 529 __ sub(rscratch1, sp, comp_words_on_stack * wordSize); 530 __ andr(sp, rscratch1, -16); 531 } 532 533 // Will jump to the compiled code just as if compiled code was doing it. 534 // Pre-load the register-jump target early, to schedule it better. 535 __ ldr(rscratch1, Address(rmethod, in_bytes(Method::from_compiled_offset()))); 536 537 // Now generate the shuffle code. 538 for (int i = 0; i < total_args_passed; i++) { 539 if (sig_bt[i] == T_VOID) { 540 assert(i > 0 && (sig_bt[i-1] == T_LONG || sig_bt[i-1] == T_DOUBLE), "missing half"); 541 continue; 542 } 543 544 // Pick up 0, 1 or 2 words from SP+offset. 545 546 assert(!regs[i].second()->is_valid() || regs[i].first()->next() == regs[i].second(), 547 "scrambled load targets?"); 548 // Load in argument order going down. 549 int ld_off = (total_args_passed - i - 1)*Interpreter::stackElementSize; 550 // Point to interpreter value (vs. tag) 551 int next_off = ld_off - Interpreter::stackElementSize; 552 // 553 // 554 // 555 VMReg r_1 = regs[i].first(); 556 VMReg r_2 = regs[i].second(); 557 if (!r_1->is_valid()) { 558 assert(!r_2->is_valid(), ""); 559 continue; 560 } 561 if (r_1->is_stack()) { 562 // Convert stack slot to an SP offset (+ wordSize to account for return address ) 563 int st_off = regs[i].first()->reg2stack()*VMRegImpl::stack_slot_size; 564 if (!r_2->is_valid()) { 565 // sign extend??? 566 __ ldrsw(rscratch2, Address(esp, ld_off)); 567 __ str(rscratch2, Address(sp, st_off)); 568 } else { 569 // 570 // We are using two optoregs. This can be either T_OBJECT, 571 // T_ADDRESS, T_LONG, or T_DOUBLE the interpreter allocates 572 // two slots but only uses one for thr T_LONG or T_DOUBLE case 573 // So we must adjust where to pick up the data to match the 574 // interpreter. 575 // 576 // Interpreter local[n] == MSW, local[n+1] == LSW however locals 577 // are accessed as negative so LSW is at LOW address 578 579 // ld_off is MSW so get LSW 580 const int offset = (sig_bt[i]==T_LONG||sig_bt[i]==T_DOUBLE)? 581 next_off : ld_off; 582 __ ldr(rscratch2, Address(esp, offset)); 583 // st_off is LSW (i.e. reg.first()) 584 __ str(rscratch2, Address(sp, st_off)); 585 } 586 } else if (r_1->is_Register()) { // Register argument 587 Register r = r_1->as_Register(); 588 if (r_2->is_valid()) { 589 // 590 // We are using two VMRegs. This can be either T_OBJECT, 591 // T_ADDRESS, T_LONG, or T_DOUBLE the interpreter allocates 592 // two slots but only uses one for thr T_LONG or T_DOUBLE case 593 // So we must adjust where to pick up the data to match the 594 // interpreter. 595 596 const int offset = (sig_bt[i]==T_LONG||sig_bt[i]==T_DOUBLE)? 597 next_off : ld_off; 598 599 // this can be a misaligned move 600 __ ldr(r, Address(esp, offset)); 601 } else { 602 // sign extend and use a full word? 603 __ ldrw(r, Address(esp, ld_off)); 604 } 605 } else { 606 if (!r_2->is_valid()) { 607 __ ldrs(r_1->as_FloatRegister(), Address(esp, ld_off)); 608 } else { 609 __ ldrd(r_1->as_FloatRegister(), Address(esp, next_off)); 610 } 611 } 612 } 613 614 // 6243940 We might end up in handle_wrong_method if 615 // the callee is deoptimized as we race thru here. If that 616 // happens we don't want to take a safepoint because the 617 // caller frame will look interpreted and arguments are now 618 // "compiled" so it is much better to make this transition 619 // invisible to the stack walking code. Unfortunately if 620 // we try and find the callee by normal means a safepoint 621 // is possible. So we stash the desired callee in the thread 622 // and the vm will find there should this case occur. 623 624 __ str(rmethod, Address(rthread, JavaThread::callee_target_offset())); 625 626 __ br(rscratch1); 627 } 628 629 #ifdef BUILTIN_SIM 630 static void generate_i2c_adapter_name(char *result, int total_args_passed, const BasicType *sig_bt) 631 { 632 strcpy(result, "i2c("); 633 int idx = 4; 634 for (int i = 0; i < total_args_passed; i++) { 635 switch(sig_bt[i]) { 636 case T_BOOLEAN: 637 result[idx++] = 'Z'; 638 break; 639 case T_CHAR: 640 result[idx++] = 'C'; 641 break; 642 case T_FLOAT: 643 result[idx++] = 'F'; 644 break; 645 case T_DOUBLE: 646 assert((i < (total_args_passed - 1)) && (sig_bt[i+1] == T_VOID), 647 "double must be followed by void"); 648 i++; 649 result[idx++] = 'D'; 650 break; 651 case T_BYTE: 652 result[idx++] = 'B'; 653 break; 654 case T_SHORT: 655 result[idx++] = 'S'; 656 break; 657 case T_INT: 658 result[idx++] = 'I'; 659 break; 660 case T_LONG: 661 assert((i < (total_args_passed - 1)) && (sig_bt[i+1] == T_VOID), 662 "long must be followed by void"); 663 i++; 664 result[idx++] = 'L'; 665 break; 666 case T_OBJECT: 667 result[idx++] = 'O'; 668 break; 669 case T_ARRAY: 670 result[idx++] = '['; 671 break; 672 case T_ADDRESS: 673 result[idx++] = 'P'; 674 break; 675 case T_NARROWOOP: 676 result[idx++] = 'N'; 677 break; 678 case T_METADATA: 679 result[idx++] = 'M'; 680 break; 681 case T_NARROWKLASS: 682 result[idx++] = 'K'; 683 break; 684 default: 685 result[idx++] = '?'; 686 break; 687 } 688 } 689 result[idx++] = ')'; 690 result[idx] = '\0'; 691 } 692 #endif 693 694 // --------------------------------------------------------------- 695 AdapterHandlerEntry* SharedRuntime::generate_i2c2i_adapters(MacroAssembler *masm, 696 int total_args_passed, 697 int comp_args_on_stack, 698 const BasicType *sig_bt, 699 const VMRegPair *regs, 700 AdapterFingerPrint* fingerprint) { 701 address i2c_entry = __ pc(); 702 #ifdef BUILTIN_SIM 703 char *name = NULL; 704 AArch64Simulator *sim = NULL; 705 size_t len = 65536; 706 if (NotifySimulator) { 707 name = NEW_C_HEAP_ARRAY(char, len, mtInternal); 708 } 709 710 if (name) { 711 generate_i2c_adapter_name(name, total_args_passed, sig_bt); 712 sim = AArch64Simulator::get_current(UseSimulatorCache, DisableBCCheck); 713 sim->notifyCompile(name, i2c_entry); 714 } 715 #endif 716 gen_i2c_adapter(masm, total_args_passed, comp_args_on_stack, sig_bt, regs); 717 718 address c2i_unverified_entry = __ pc(); 719 Label skip_fixup; 720 721 Label ok; 722 723 Register holder = rscratch2; 724 Register receiver = j_rarg0; 725 Register tmp = r10; // A call-clobbered register not used for arg passing 726 727 // ------------------------------------------------------------------------- 728 // Generate a C2I adapter. On entry we know rmethod holds the Method* during calls 729 // to the interpreter. The args start out packed in the compiled layout. They 730 // need to be unpacked into the interpreter layout. This will almost always 731 // require some stack space. We grow the current (compiled) stack, then repack 732 // the args. We finally end in a jump to the generic interpreter entry point. 733 // On exit from the interpreter, the interpreter will restore our SP (lest the 734 // compiled code, which relys solely on SP and not FP, get sick). 735 736 { 737 __ block_comment("c2i_unverified_entry {"); 738 __ load_klass(rscratch1, receiver); 739 __ ldr(tmp, Address(holder, CompiledICHolder::holder_klass_offset())); 740 __ cmp(rscratch1, tmp); 741 __ ldr(rmethod, Address(holder, CompiledICHolder::holder_method_offset())); 742 __ br(Assembler::EQ, ok); 743 __ far_jump(RuntimeAddress(SharedRuntime::get_ic_miss_stub())); 744 745 __ bind(ok); 746 // Method might have been compiled since the call site was patched to 747 // interpreted; if that is the case treat it as a miss so we can get 748 // the call site corrected. 749 __ ldr(rscratch1, Address(rmethod, in_bytes(Method::code_offset()))); 750 __ cbz(rscratch1, skip_fixup); 751 __ far_jump(RuntimeAddress(SharedRuntime::get_ic_miss_stub())); 752 __ block_comment("} c2i_unverified_entry"); 753 } 754 755 address c2i_entry = __ pc(); 756 757 #ifdef BUILTIN_SIM 758 if (name) { 759 name[0] = 'c'; 760 name[2] = 'i'; 761 sim->notifyCompile(name, c2i_entry); 762 FREE_C_HEAP_ARRAY(char, name, mtInternal); 763 } 764 #endif 765 766 gen_c2i_adapter(masm, total_args_passed, comp_args_on_stack, sig_bt, regs, skip_fixup); 767 768 __ flush(); 769 return AdapterHandlerLibrary::new_entry(fingerprint, i2c_entry, c2i_entry, c2i_unverified_entry); 770 } 771 772 int SharedRuntime::c_calling_convention(const BasicType *sig_bt, 773 VMRegPair *regs, 774 VMRegPair *regs2, 775 int total_args_passed) { 776 assert(regs2 == NULL, "not needed on AArch64"); 777 778 // We return the amount of VMRegImpl stack slots we need to reserve for all 779 // the arguments NOT counting out_preserve_stack_slots. 780 781 static const Register INT_ArgReg[Argument::n_int_register_parameters_c] = { 782 c_rarg0, c_rarg1, c_rarg2, c_rarg3, c_rarg4, c_rarg5, c_rarg6, c_rarg7 783 }; 784 static const FloatRegister FP_ArgReg[Argument::n_float_register_parameters_c] = { 785 c_farg0, c_farg1, c_farg2, c_farg3, 786 c_farg4, c_farg5, c_farg6, c_farg7 787 }; 788 789 uint int_args = 0; 790 uint fp_args = 0; 791 uint stk_args = 0; // inc by 2 each time 792 793 for (int i = 0; i < total_args_passed; i++) { 794 switch (sig_bt[i]) { 795 case T_BOOLEAN: 796 case T_CHAR: 797 case T_BYTE: 798 case T_SHORT: 799 case T_INT: 800 if (int_args < Argument::n_int_register_parameters_c) { 801 regs[i].set1(INT_ArgReg[int_args++]->as_VMReg()); 802 } else { 803 regs[i].set1(VMRegImpl::stack2reg(stk_args)); 804 stk_args += 2; 805 } 806 break; 807 case T_LONG: 808 assert(sig_bt[i + 1] == T_VOID, "expecting half"); 809 // fall through 810 case T_OBJECT: 811 case T_ARRAY: 812 case T_ADDRESS: 813 case T_METADATA: 814 if (int_args < Argument::n_int_register_parameters_c) { 815 regs[i].set2(INT_ArgReg[int_args++]->as_VMReg()); 816 } else { 817 regs[i].set2(VMRegImpl::stack2reg(stk_args)); 818 stk_args += 2; 819 } 820 break; 821 case T_FLOAT: 822 if (fp_args < Argument::n_float_register_parameters_c) { 823 regs[i].set1(FP_ArgReg[fp_args++]->as_VMReg()); 824 } else { 825 regs[i].set1(VMRegImpl::stack2reg(stk_args)); 826 stk_args += 2; 827 } 828 break; 829 case T_DOUBLE: 830 assert(sig_bt[i + 1] == T_VOID, "expecting half"); 831 if (fp_args < Argument::n_float_register_parameters_c) { 832 regs[i].set2(FP_ArgReg[fp_args++]->as_VMReg()); 833 } else { 834 regs[i].set2(VMRegImpl::stack2reg(stk_args)); 835 stk_args += 2; 836 } 837 break; 838 case T_VOID: // Halves of longs and doubles 839 assert(i != 0 && (sig_bt[i - 1] == T_LONG || sig_bt[i - 1] == T_DOUBLE), "expecting half"); 840 regs[i].set_bad(); 841 break; 842 default: 843 ShouldNotReachHere(); 844 break; 845 } 846 } 847 848 return stk_args; 849 } 850 851 // On 64 bit we will store integer like items to the stack as 852 // 64 bits items (sparc abi) even though java would only store 853 // 32bits for a parameter. On 32bit it will simply be 32 bits 854 // So this routine will do 32->32 on 32bit and 32->64 on 64bit 855 static void move32_64(MacroAssembler* masm, VMRegPair src, VMRegPair dst) { 856 if (src.first()->is_stack()) { 857 if (dst.first()->is_stack()) { 858 // stack to stack 859 __ ldr(rscratch1, Address(rfp, reg2offset_in(src.first()))); 860 __ str(rscratch1, Address(sp, reg2offset_out(dst.first()))); 861 } else { 862 // stack to reg 863 __ ldrsw(dst.first()->as_Register(), Address(rfp, reg2offset_in(src.first()))); 864 } 865 } else if (dst.first()->is_stack()) { 866 // reg to stack 867 // Do we really have to sign extend??? 868 // __ movslq(src.first()->as_Register(), src.first()->as_Register()); 869 __ str(src.first()->as_Register(), Address(sp, reg2offset_out(dst.first()))); 870 } else { 871 if (dst.first() != src.first()) { 872 __ sxtw(dst.first()->as_Register(), src.first()->as_Register()); 873 } 874 } 875 } 876 877 // An oop arg. Must pass a handle not the oop itself 878 static void object_move(MacroAssembler* masm, 879 OopMap* map, 880 int oop_handle_offset, 881 int framesize_in_slots, 882 VMRegPair src, 883 VMRegPair dst, 884 bool is_receiver, 885 int* receiver_offset) { 886 887 // must pass a handle. First figure out the location we use as a handle 888 889 Register rHandle = dst.first()->is_stack() ? rscratch2 : dst.first()->as_Register(); 890 891 // See if oop is NULL if it is we need no handle 892 893 if (src.first()->is_stack()) { 894 895 // Oop is already on the stack as an argument 896 int offset_in_older_frame = src.first()->reg2stack() + SharedRuntime::out_preserve_stack_slots(); 897 map->set_oop(VMRegImpl::stack2reg(offset_in_older_frame + framesize_in_slots)); 898 if (is_receiver) { 899 *receiver_offset = (offset_in_older_frame + framesize_in_slots) * VMRegImpl::stack_slot_size; 900 } 901 902 __ ldr(rscratch1, Address(rfp, reg2offset_in(src.first()))); 903 __ lea(rHandle, Address(rfp, reg2offset_in(src.first()))); 904 // conditionally move a NULL 905 __ cmp(rscratch1, zr); 906 __ csel(rHandle, zr, rHandle, Assembler::EQ); 907 } else { 908 909 // Oop is in an a register we must store it to the space we reserve 910 // on the stack for oop_handles and pass a handle if oop is non-NULL 911 912 const Register rOop = src.first()->as_Register(); 913 int oop_slot; 914 if (rOop == j_rarg0) 915 oop_slot = 0; 916 else if (rOop == j_rarg1) 917 oop_slot = 1; 918 else if (rOop == j_rarg2) 919 oop_slot = 2; 920 else if (rOop == j_rarg3) 921 oop_slot = 3; 922 else if (rOop == j_rarg4) 923 oop_slot = 4; 924 else if (rOop == j_rarg5) 925 oop_slot = 5; 926 else if (rOop == j_rarg6) 927 oop_slot = 6; 928 else { 929 assert(rOop == j_rarg7, "wrong register"); 930 oop_slot = 7; 931 } 932 933 oop_slot = oop_slot * VMRegImpl::slots_per_word + oop_handle_offset; 934 int offset = oop_slot*VMRegImpl::stack_slot_size; 935 936 map->set_oop(VMRegImpl::stack2reg(oop_slot)); 937 // Store oop in handle area, may be NULL 938 __ str(rOop, Address(sp, offset)); 939 if (is_receiver) { 940 *receiver_offset = offset; 941 } 942 943 __ cmp(rOop, zr); 944 __ lea(rHandle, Address(sp, offset)); 945 // conditionally move a NULL 946 __ csel(rHandle, zr, rHandle, Assembler::EQ); 947 } 948 949 // If arg is on the stack then place it otherwise it is already in correct reg. 950 if (dst.first()->is_stack()) { 951 __ str(rHandle, Address(sp, reg2offset_out(dst.first()))); 952 } 953 } 954 955 // A float arg may have to do float reg int reg conversion 956 static void float_move(MacroAssembler* masm, VMRegPair src, VMRegPair dst) { 957 if (src.first() != dst.first()) { 958 if (src.is_single_phys_reg() && dst.is_single_phys_reg()) 959 __ fmovs(dst.first()->as_FloatRegister(), src.first()->as_FloatRegister()); 960 else 961 ShouldNotReachHere(); 962 } 963 } 964 965 // A long move 966 static void long_move(MacroAssembler* masm, VMRegPair src, VMRegPair dst) { 967 if (src.first()->is_stack()) { 968 if (dst.first()->is_stack()) { 969 // stack to stack 970 __ ldr(rscratch1, Address(rfp, reg2offset_in(src.first()))); 971 __ str(rscratch1, Address(sp, reg2offset_out(dst.first()))); 972 } else { 973 // stack to reg 974 __ ldr(dst.first()->as_Register(), Address(rfp, reg2offset_in(src.first()))); 975 } 976 } else if (dst.first()->is_stack()) { 977 // reg to stack 978 // Do we really have to sign extend??? 979 // __ movslq(src.first()->as_Register(), src.first()->as_Register()); 980 __ str(src.first()->as_Register(), Address(sp, reg2offset_out(dst.first()))); 981 } else { 982 if (dst.first() != src.first()) { 983 __ mov(dst.first()->as_Register(), src.first()->as_Register()); 984 } 985 } 986 } 987 988 989 // A double move 990 static void double_move(MacroAssembler* masm, VMRegPair src, VMRegPair dst) { 991 if (src.first() != dst.first()) { 992 if (src.is_single_phys_reg() && dst.is_single_phys_reg()) 993 __ fmovd(dst.first()->as_FloatRegister(), src.first()->as_FloatRegister()); 994 else 995 ShouldNotReachHere(); 996 } 997 } 998 999 1000 void SharedRuntime::save_native_result(MacroAssembler *masm, BasicType ret_type, int frame_slots) { 1001 // We always ignore the frame_slots arg and just use the space just below frame pointer 1002 // which by this time is free to use 1003 switch (ret_type) { 1004 case T_FLOAT: 1005 __ strs(v0, Address(rfp, -wordSize)); 1006 break; 1007 case T_DOUBLE: 1008 __ strd(v0, Address(rfp, -wordSize)); 1009 break; 1010 case T_VOID: break; 1011 default: { 1012 __ str(r0, Address(rfp, -wordSize)); 1013 } 1014 } 1015 } 1016 1017 void SharedRuntime::restore_native_result(MacroAssembler *masm, BasicType ret_type, int frame_slots) { 1018 // We always ignore the frame_slots arg and just use the space just below frame pointer 1019 // which by this time is free to use 1020 switch (ret_type) { 1021 case T_FLOAT: 1022 __ ldrs(v0, Address(rfp, -wordSize)); 1023 break; 1024 case T_DOUBLE: 1025 __ ldrd(v0, Address(rfp, -wordSize)); 1026 break; 1027 case T_VOID: break; 1028 default: { 1029 __ ldr(r0, Address(rfp, -wordSize)); 1030 } 1031 } 1032 } 1033 static void save_args(MacroAssembler *masm, int arg_count, int first_arg, VMRegPair *args) { 1034 RegSet x; 1035 for ( int i = first_arg ; i < arg_count ; i++ ) { 1036 if (args[i].first()->is_Register()) { 1037 x = x + args[i].first()->as_Register(); 1038 } else if (args[i].first()->is_FloatRegister()) { 1039 __ strd(args[i].first()->as_FloatRegister(), Address(__ pre(sp, -2 * wordSize))); 1040 } 1041 } 1042 __ push(x, sp); 1043 } 1044 1045 static void restore_args(MacroAssembler *masm, int arg_count, int first_arg, VMRegPair *args) { 1046 RegSet x; 1047 for ( int i = first_arg ; i < arg_count ; i++ ) { 1048 if (args[i].first()->is_Register()) { 1049 x = x + args[i].first()->as_Register(); 1050 } else { 1051 ; 1052 } 1053 } 1054 __ pop(x, sp); 1055 for ( int i = first_arg ; i < arg_count ; i++ ) { 1056 if (args[i].first()->is_Register()) { 1057 ; 1058 } else if (args[i].first()->is_FloatRegister()) { 1059 __ ldrd(args[i].first()->as_FloatRegister(), Address(__ post(sp, 2 * wordSize))); 1060 } 1061 } 1062 } 1063 1064 1065 // Check GC_locker::needs_gc and enter the runtime if it's true. This 1066 // keeps a new JNI critical region from starting until a GC has been 1067 // forced. Save down any oops in registers and describe them in an 1068 // OopMap. 1069 static void check_needs_gc_for_critical_native(MacroAssembler* masm, 1070 int stack_slots, 1071 int total_c_args, 1072 int total_in_args, 1073 int arg_save_area, 1074 OopMapSet* oop_maps, 1075 VMRegPair* in_regs, 1076 BasicType* in_sig_bt) { Unimplemented(); } 1077 1078 // Unpack an array argument into a pointer to the body and the length 1079 // if the array is non-null, otherwise pass 0 for both. 1080 static void unpack_array_argument(MacroAssembler* masm, VMRegPair reg, BasicType in_elem_type, VMRegPair body_arg, VMRegPair length_arg) { Unimplemented(); } 1081 1082 1083 class ComputeMoveOrder: public StackObj { 1084 class MoveOperation: public ResourceObj { 1085 friend class ComputeMoveOrder; 1086 private: 1087 VMRegPair _src; 1088 VMRegPair _dst; 1089 int _src_index; 1090 int _dst_index; 1091 bool _processed; 1092 MoveOperation* _next; 1093 MoveOperation* _prev; 1094 1095 static int get_id(VMRegPair r) { Unimplemented(); return 0; } 1096 1097 public: 1098 MoveOperation(int src_index, VMRegPair src, int dst_index, VMRegPair dst): 1099 _src(src) 1100 , _src_index(src_index) 1101 , _dst(dst) 1102 , _dst_index(dst_index) 1103 , _next(NULL) 1104 , _prev(NULL) 1105 , _processed(false) { Unimplemented(); } 1106 1107 VMRegPair src() const { Unimplemented(); return _src; } 1108 int src_id() const { Unimplemented(); return 0; } 1109 int src_index() const { Unimplemented(); return 0; } 1110 VMRegPair dst() const { Unimplemented(); return _src; } 1111 void set_dst(int i, VMRegPair dst) { Unimplemented(); } 1112 int dst_index() const { Unimplemented(); return 0; } 1113 int dst_id() const { Unimplemented(); return 0; } 1114 MoveOperation* next() const { Unimplemented(); return 0; } 1115 MoveOperation* prev() const { Unimplemented(); return 0; } 1116 void set_processed() { Unimplemented(); } 1117 bool is_processed() const { Unimplemented(); return 0; } 1118 1119 // insert 1120 void break_cycle(VMRegPair temp_register) { Unimplemented(); } 1121 1122 void link(GrowableArray<MoveOperation*>& killer) { Unimplemented(); } 1123 }; 1124 1125 private: 1126 GrowableArray<MoveOperation*> edges; 1127 1128 public: 1129 ComputeMoveOrder(int total_in_args, VMRegPair* in_regs, int total_c_args, VMRegPair* out_regs, 1130 BasicType* in_sig_bt, GrowableArray<int>& arg_order, VMRegPair tmp_vmreg) { Unimplemented(); } 1131 1132 // Collected all the move operations 1133 void add_edge(int src_index, VMRegPair src, int dst_index, VMRegPair dst) { Unimplemented(); } 1134 1135 // Walk the edges breaking cycles between moves. The result list 1136 // can be walked in order to produce the proper set of loads 1137 GrowableArray<MoveOperation*>* get_store_order(VMRegPair temp_register) { Unimplemented(); return 0; } 1138 }; 1139 1140 1141 static void rt_call(MacroAssembler* masm, address dest, int gpargs, int fpargs, int type) { 1142 CodeBlob *cb = CodeCache::find_blob(dest); 1143 if (cb) { 1144 __ far_call(RuntimeAddress(dest)); 1145 } else { 1146 assert((unsigned)gpargs < 256, "eek!"); 1147 assert((unsigned)fpargs < 32, "eek!"); 1148 __ lea(rscratch1, RuntimeAddress(dest)); 1149 __ mov(rscratch2, (gpargs << 6) | (fpargs << 2) | type); 1150 __ blrt(rscratch1, rscratch2); 1151 __ maybe_isb(); 1152 } 1153 } 1154 1155 static void verify_oop_args(MacroAssembler* masm, 1156 methodHandle method, 1157 const BasicType* sig_bt, 1158 const VMRegPair* regs) { 1159 Register temp_reg = r19; // not part of any compiled calling seq 1160 if (VerifyOops) { 1161 for (int i = 0; i < method->size_of_parameters(); i++) { 1162 if (sig_bt[i] == T_OBJECT || 1163 sig_bt[i] == T_ARRAY) { 1164 VMReg r = regs[i].first(); 1165 assert(r->is_valid(), "bad oop arg"); 1166 if (r->is_stack()) { 1167 __ ldr(temp_reg, Address(sp, r->reg2stack() * VMRegImpl::stack_slot_size)); 1168 __ verify_oop(temp_reg); 1169 } else { 1170 __ verify_oop(r->as_Register()); 1171 } 1172 } 1173 } 1174 } 1175 } 1176 1177 static void gen_special_dispatch(MacroAssembler* masm, 1178 methodHandle method, 1179 const BasicType* sig_bt, 1180 const VMRegPair* regs) { 1181 verify_oop_args(masm, method, sig_bt, regs); 1182 vmIntrinsics::ID iid = method->intrinsic_id(); 1183 1184 // Now write the args into the outgoing interpreter space 1185 bool has_receiver = false; 1186 Register receiver_reg = noreg; 1187 int member_arg_pos = -1; 1188 Register member_reg = noreg; 1189 int ref_kind = MethodHandles::signature_polymorphic_intrinsic_ref_kind(iid); 1190 if (ref_kind != 0) { 1191 member_arg_pos = method->size_of_parameters() - 1; // trailing MemberName argument 1192 member_reg = r19; // known to be free at this point 1193 has_receiver = MethodHandles::ref_kind_has_receiver(ref_kind); 1194 } else if (iid == vmIntrinsics::_invokeBasic) { 1195 has_receiver = true; 1196 } else { 1197 fatal(err_msg_res("unexpected intrinsic id %d", iid)); 1198 } 1199 1200 if (member_reg != noreg) { 1201 // Load the member_arg into register, if necessary. 1202 SharedRuntime::check_member_name_argument_is_last_argument(method, sig_bt, regs); 1203 VMReg r = regs[member_arg_pos].first(); 1204 if (r->is_stack()) { 1205 __ ldr(member_reg, Address(sp, r->reg2stack() * VMRegImpl::stack_slot_size)); 1206 } else { 1207 // no data motion is needed 1208 member_reg = r->as_Register(); 1209 } 1210 } 1211 1212 if (has_receiver) { 1213 // Make sure the receiver is loaded into a register. 1214 assert(method->size_of_parameters() > 0, "oob"); 1215 assert(sig_bt[0] == T_OBJECT, "receiver argument must be an object"); 1216 VMReg r = regs[0].first(); 1217 assert(r->is_valid(), "bad receiver arg"); 1218 if (r->is_stack()) { 1219 // Porting note: This assumes that compiled calling conventions always 1220 // pass the receiver oop in a register. If this is not true on some 1221 // platform, pick a temp and load the receiver from stack. 1222 fatal("receiver always in a register"); 1223 receiver_reg = r2; // known to be free at this point 1224 __ ldr(receiver_reg, Address(sp, r->reg2stack() * VMRegImpl::stack_slot_size)); 1225 } else { 1226 // no data motion is needed 1227 receiver_reg = r->as_Register(); 1228 } 1229 } 1230 1231 // Figure out which address we are really jumping to: 1232 MethodHandles::generate_method_handle_dispatch(masm, iid, 1233 receiver_reg, member_reg, /*for_compiler_entry:*/ true); 1234 } 1235 1236 // --------------------------------------------------------------------------- 1237 // Generate a native wrapper for a given method. The method takes arguments 1238 // in the Java compiled code convention, marshals them to the native 1239 // convention (handlizes oops, etc), transitions to native, makes the call, 1240 // returns to java state (possibly blocking), unhandlizes any result and 1241 // returns. 1242 // 1243 // Critical native functions are a shorthand for the use of 1244 // GetPrimtiveArrayCritical and disallow the use of any other JNI 1245 // functions. The wrapper is expected to unpack the arguments before 1246 // passing them to the callee and perform checks before and after the 1247 // native call to ensure that they GC_locker 1248 // lock_critical/unlock_critical semantics are followed. Some other 1249 // parts of JNI setup are skipped like the tear down of the JNI handle 1250 // block and the check for pending exceptions it's impossible for them 1251 // to be thrown. 1252 // 1253 // They are roughly structured like this: 1254 // if (GC_locker::needs_gc()) 1255 // SharedRuntime::block_for_jni_critical(); 1256 // tranistion to thread_in_native 1257 // unpack arrray arguments and call native entry point 1258 // check for safepoint in progress 1259 // check if any thread suspend flags are set 1260 // call into JVM and possible unlock the JNI critical 1261 // if a GC was suppressed while in the critical native. 1262 // transition back to thread_in_Java 1263 // return to caller 1264 // 1265 nmethod* SharedRuntime::generate_native_wrapper(MacroAssembler* masm, 1266 methodHandle method, 1267 int compile_id, 1268 BasicType* in_sig_bt, 1269 VMRegPair* in_regs, 1270 BasicType ret_type) { 1271 #ifdef BUILTIN_SIM 1272 if (NotifySimulator) { 1273 // Names are up to 65536 chars long. UTF8-coded strings are up to 1274 // 3 bytes per character. We concatenate three such strings. 1275 // Yes, I know this is ridiculous, but it's debug code and glibc 1276 // allocates large arrays very efficiently. 1277 size_t len = (65536 * 3) * 3; 1278 char *name = new char[len]; 1279 1280 strncpy(name, method()->method_holder()->name()->as_utf8(), len); 1281 strncat(name, ".", len); 1282 strncat(name, method()->name()->as_utf8(), len); 1283 strncat(name, method()->signature()->as_utf8(), len); 1284 AArch64Simulator::get_current(UseSimulatorCache, DisableBCCheck)->notifyCompile(name, __ pc()); 1285 delete[] name; 1286 } 1287 #endif 1288 1289 if (method->is_method_handle_intrinsic()) { 1290 vmIntrinsics::ID iid = method->intrinsic_id(); 1291 intptr_t start = (intptr_t)__ pc(); 1292 int vep_offset = ((intptr_t)__ pc()) - start; 1293 1294 // First instruction must be a nop as it may need to be patched on deoptimisation 1295 __ nop(); 1296 gen_special_dispatch(masm, 1297 method, 1298 in_sig_bt, 1299 in_regs); 1300 int frame_complete = ((intptr_t)__ pc()) - start; // not complete, period 1301 __ flush(); 1302 int stack_slots = SharedRuntime::out_preserve_stack_slots(); // no out slots at all, actually 1303 return nmethod::new_native_nmethod(method, 1304 compile_id, 1305 masm->code(), 1306 vep_offset, 1307 frame_complete, 1308 stack_slots / VMRegImpl::slots_per_word, 1309 in_ByteSize(-1), 1310 in_ByteSize(-1), 1311 (OopMapSet*)NULL); 1312 } 1313 bool is_critical_native = true; 1314 address native_func = method->critical_native_function(); 1315 if (native_func == NULL) { 1316 native_func = method->native_function(); 1317 is_critical_native = false; 1318 } 1319 assert(native_func != NULL, "must have function"); 1320 1321 // An OopMap for lock (and class if static) 1322 OopMapSet *oop_maps = new OopMapSet(); 1323 intptr_t start = (intptr_t)__ pc(); 1324 1325 // We have received a description of where all the java arg are located 1326 // on entry to the wrapper. We need to convert these args to where 1327 // the jni function will expect them. To figure out where they go 1328 // we convert the java signature to a C signature by inserting 1329 // the hidden arguments as arg[0] and possibly arg[1] (static method) 1330 1331 const int total_in_args = method->size_of_parameters(); 1332 int total_c_args = total_in_args; 1333 if (!is_critical_native) { 1334 total_c_args += 1; 1335 if (method->is_static()) { 1336 total_c_args++; 1337 } 1338 } else { 1339 for (int i = 0; i < total_in_args; i++) { 1340 if (in_sig_bt[i] == T_ARRAY) { 1341 total_c_args++; 1342 } 1343 } 1344 } 1345 1346 BasicType* out_sig_bt = NEW_RESOURCE_ARRAY(BasicType, total_c_args); 1347 VMRegPair* out_regs = NEW_RESOURCE_ARRAY(VMRegPair, total_c_args); 1348 BasicType* in_elem_bt = NULL; 1349 1350 int argc = 0; 1351 if (!is_critical_native) { 1352 out_sig_bt[argc++] = T_ADDRESS; 1353 if (method->is_static()) { 1354 out_sig_bt[argc++] = T_OBJECT; 1355 } 1356 1357 for (int i = 0; i < total_in_args ; i++ ) { 1358 out_sig_bt[argc++] = in_sig_bt[i]; 1359 } 1360 } else { 1361 Thread* THREAD = Thread::current(); 1362 in_elem_bt = NEW_RESOURCE_ARRAY(BasicType, total_in_args); 1363 SignatureStream ss(method->signature()); 1364 for (int i = 0; i < total_in_args ; i++ ) { 1365 if (in_sig_bt[i] == T_ARRAY) { 1366 // Arrays are passed as int, elem* pair 1367 out_sig_bt[argc++] = T_INT; 1368 out_sig_bt[argc++] = T_ADDRESS; 1369 Symbol* atype = ss.as_symbol(CHECK_NULL); 1370 const char* at = atype->as_C_string(); 1371 if (strlen(at) == 2) { 1372 assert(at[0] == '[', "must be"); 1373 switch (at[1]) { 1374 case 'B': in_elem_bt[i] = T_BYTE; break; 1375 case 'C': in_elem_bt[i] = T_CHAR; break; 1376 case 'D': in_elem_bt[i] = T_DOUBLE; break; 1377 case 'F': in_elem_bt[i] = T_FLOAT; break; 1378 case 'I': in_elem_bt[i] = T_INT; break; 1379 case 'J': in_elem_bt[i] = T_LONG; break; 1380 case 'S': in_elem_bt[i] = T_SHORT; break; 1381 case 'Z': in_elem_bt[i] = T_BOOLEAN; break; 1382 default: ShouldNotReachHere(); 1383 } 1384 } 1385 } else { 1386 out_sig_bt[argc++] = in_sig_bt[i]; 1387 in_elem_bt[i] = T_VOID; 1388 } 1389 if (in_sig_bt[i] != T_VOID) { 1390 assert(in_sig_bt[i] == ss.type(), "must match"); 1391 ss.next(); 1392 } 1393 } 1394 } 1395 1396 // Now figure out where the args must be stored and how much stack space 1397 // they require. 1398 int out_arg_slots; 1399 out_arg_slots = c_calling_convention(out_sig_bt, out_regs, NULL, total_c_args); 1400 1401 // Compute framesize for the wrapper. We need to handlize all oops in 1402 // incoming registers 1403 1404 // Calculate the total number of stack slots we will need. 1405 1406 // First count the abi requirement plus all of the outgoing args 1407 int stack_slots = SharedRuntime::out_preserve_stack_slots() + out_arg_slots; 1408 1409 // Now the space for the inbound oop handle area 1410 int total_save_slots = 8 * VMRegImpl::slots_per_word; // 8 arguments passed in registers 1411 if (is_critical_native) { 1412 // Critical natives may have to call out so they need a save area 1413 // for register arguments. 1414 int double_slots = 0; 1415 int single_slots = 0; 1416 for ( int i = 0; i < total_in_args; i++) { 1417 if (in_regs[i].first()->is_Register()) { 1418 const Register reg = in_regs[i].first()->as_Register(); 1419 switch (in_sig_bt[i]) { 1420 case T_BOOLEAN: 1421 case T_BYTE: 1422 case T_SHORT: 1423 case T_CHAR: 1424 case T_INT: single_slots++; break; 1425 case T_ARRAY: // specific to LP64 (7145024) 1426 case T_LONG: double_slots++; break; 1427 default: ShouldNotReachHere(); 1428 } 1429 } else if (in_regs[i].first()->is_FloatRegister()) { 1430 ShouldNotReachHere(); 1431 } 1432 } 1433 total_save_slots = double_slots * 2 + single_slots; 1434 // align the save area 1435 if (double_slots != 0) { 1436 stack_slots = round_to(stack_slots, 2); 1437 } 1438 } 1439 1440 int oop_handle_offset = stack_slots; 1441 stack_slots += total_save_slots; 1442 1443 // Now any space we need for handlizing a klass if static method 1444 1445 int klass_slot_offset = 0; 1446 int klass_offset = -1; 1447 int lock_slot_offset = 0; 1448 bool is_static = false; 1449 1450 if (method->is_static()) { 1451 klass_slot_offset = stack_slots; 1452 stack_slots += VMRegImpl::slots_per_word; 1453 klass_offset = klass_slot_offset * VMRegImpl::stack_slot_size; 1454 is_static = true; 1455 } 1456 1457 // Plus a lock if needed 1458 1459 if (method->is_synchronized()) { 1460 lock_slot_offset = stack_slots; 1461 stack_slots += VMRegImpl::slots_per_word; 1462 } 1463 1464 // Now a place (+2) to save return values or temp during shuffling 1465 // + 4 for return address (which we own) and saved rfp 1466 stack_slots += 6; 1467 1468 // Ok The space we have allocated will look like: 1469 // 1470 // 1471 // FP-> | | 1472 // |---------------------| 1473 // | 2 slots for moves | 1474 // |---------------------| 1475 // | lock box (if sync) | 1476 // |---------------------| <- lock_slot_offset 1477 // | klass (if static) | 1478 // |---------------------| <- klass_slot_offset 1479 // | oopHandle area | 1480 // |---------------------| <- oop_handle_offset (8 java arg registers) 1481 // | outbound memory | 1482 // | based arguments | 1483 // | | 1484 // |---------------------| 1485 // | | 1486 // SP-> | out_preserved_slots | 1487 // 1488 // 1489 1490 1491 // Now compute actual number of stack words we need rounding to make 1492 // stack properly aligned. 1493 stack_slots = round_to(stack_slots, StackAlignmentInSlots); 1494 1495 int stack_size = stack_slots * VMRegImpl::stack_slot_size; 1496 1497 // First thing make an ic check to see if we should even be here 1498 1499 // We are free to use all registers as temps without saving them and 1500 // restoring them except rfp. rfp is the only callee save register 1501 // as far as the interpreter and the compiler(s) are concerned. 1502 1503 1504 const Register ic_reg = rscratch2; 1505 const Register receiver = j_rarg0; 1506 1507 Label hit; 1508 Label exception_pending; 1509 1510 assert_different_registers(ic_reg, receiver, rscratch1); 1511 __ verify_oop(receiver); 1512 __ cmp_klass(receiver, ic_reg, rscratch1); 1513 __ br(Assembler::EQ, hit); 1514 1515 __ far_jump(RuntimeAddress(SharedRuntime::get_ic_miss_stub())); 1516 1517 // Verified entry point must be aligned 1518 __ align(8); 1519 1520 __ bind(hit); 1521 1522 int vep_offset = ((intptr_t)__ pc()) - start; 1523 1524 // Generate stack overflow check 1525 1526 // If we have to make this method not-entrant we'll overwrite its 1527 // first instruction with a jump. For this action to be legal we 1528 // must ensure that this first instruction is a B, BL, NOP, BKPT, 1529 // SVC, HVC, or SMC. Make it a NOP. 1530 __ nop(); 1531 1532 if (UseStackBanging) { 1533 __ bang_stack_with_offset(StackShadowPages*os::vm_page_size()); 1534 } else { 1535 Unimplemented(); 1536 } 1537 1538 // Generate a new frame for the wrapper. 1539 __ enter(); 1540 // -2 because return address is already present and so is saved rfp 1541 __ sub(sp, sp, stack_size - 2*wordSize); 1542 1543 // Frame is now completed as far as size and linkage. 1544 int frame_complete = ((intptr_t)__ pc()) - start; 1545 1546 // record entry into native wrapper code 1547 if (NotifySimulator) { 1548 __ notify(Assembler::method_entry); 1549 } 1550 1551 // We use r20 as the oop handle for the receiver/klass 1552 // It is callee save so it survives the call to native 1553 1554 const Register oop_handle_reg = r20; 1555 1556 if (is_critical_native) { 1557 check_needs_gc_for_critical_native(masm, stack_slots, total_c_args, total_in_args, 1558 oop_handle_offset, oop_maps, in_regs, in_sig_bt); 1559 } 1560 1561 // 1562 // We immediately shuffle the arguments so that any vm call we have to 1563 // make from here on out (sync slow path, jvmti, etc.) we will have 1564 // captured the oops from our caller and have a valid oopMap for 1565 // them. 1566 1567 // ----------------- 1568 // The Grand Shuffle 1569 1570 // The Java calling convention is either equal (linux) or denser (win64) than the 1571 // c calling convention. However the because of the jni_env argument the c calling 1572 // convention always has at least one more (and two for static) arguments than Java. 1573 // Therefore if we move the args from java -> c backwards then we will never have 1574 // a register->register conflict and we don't have to build a dependency graph 1575 // and figure out how to break any cycles. 1576 // 1577 1578 // Record esp-based slot for receiver on stack for non-static methods 1579 int receiver_offset = -1; 1580 1581 // This is a trick. We double the stack slots so we can claim 1582 // the oops in the caller's frame. Since we are sure to have 1583 // more args than the caller doubling is enough to make 1584 // sure we can capture all the incoming oop args from the 1585 // caller. 1586 // 1587 OopMap* map = new OopMap(stack_slots * 2, 0 /* arg_slots*/); 1588 1589 // Mark location of rfp (someday) 1590 // map->set_callee_saved(VMRegImpl::stack2reg( stack_slots - 2), stack_slots * 2, 0, vmreg(rfp)); 1591 1592 1593 int float_args = 0; 1594 int int_args = 0; 1595 1596 #ifdef ASSERT 1597 bool reg_destroyed[RegisterImpl::number_of_registers]; 1598 bool freg_destroyed[FloatRegisterImpl::number_of_registers]; 1599 for ( int r = 0 ; r < RegisterImpl::number_of_registers ; r++ ) { 1600 reg_destroyed[r] = false; 1601 } 1602 for ( int f = 0 ; f < FloatRegisterImpl::number_of_registers ; f++ ) { 1603 freg_destroyed[f] = false; 1604 } 1605 1606 #endif /* ASSERT */ 1607 1608 // This may iterate in two different directions depending on the 1609 // kind of native it is. The reason is that for regular JNI natives 1610 // the incoming and outgoing registers are offset upwards and for 1611 // critical natives they are offset down. 1612 GrowableArray<int> arg_order(2 * total_in_args); 1613 VMRegPair tmp_vmreg; 1614 tmp_vmreg.set1(r19->as_VMReg()); 1615 1616 if (!is_critical_native) { 1617 for (int i = total_in_args - 1, c_arg = total_c_args - 1; i >= 0; i--, c_arg--) { 1618 arg_order.push(i); 1619 arg_order.push(c_arg); 1620 } 1621 } else { 1622 // Compute a valid move order, using tmp_vmreg to break any cycles 1623 ComputeMoveOrder cmo(total_in_args, in_regs, total_c_args, out_regs, in_sig_bt, arg_order, tmp_vmreg); 1624 } 1625 1626 int temploc = -1; 1627 for (int ai = 0; ai < arg_order.length(); ai += 2) { 1628 int i = arg_order.at(ai); 1629 int c_arg = arg_order.at(ai + 1); 1630 __ block_comment(err_msg("move %d -> %d", i, c_arg)); 1631 if (c_arg == -1) { 1632 assert(is_critical_native, "should only be required for critical natives"); 1633 // This arg needs to be moved to a temporary 1634 __ mov(tmp_vmreg.first()->as_Register(), in_regs[i].first()->as_Register()); 1635 in_regs[i] = tmp_vmreg; 1636 temploc = i; 1637 continue; 1638 } else if (i == -1) { 1639 assert(is_critical_native, "should only be required for critical natives"); 1640 // Read from the temporary location 1641 assert(temploc != -1, "must be valid"); 1642 i = temploc; 1643 temploc = -1; 1644 } 1645 #ifdef ASSERT 1646 if (in_regs[i].first()->is_Register()) { 1647 assert(!reg_destroyed[in_regs[i].first()->as_Register()->encoding()], "destroyed reg!"); 1648 } else if (in_regs[i].first()->is_FloatRegister()) { 1649 assert(!freg_destroyed[in_regs[i].first()->as_FloatRegister()->encoding()], "destroyed reg!"); 1650 } 1651 if (out_regs[c_arg].first()->is_Register()) { 1652 reg_destroyed[out_regs[c_arg].first()->as_Register()->encoding()] = true; 1653 } else if (out_regs[c_arg].first()->is_FloatRegister()) { 1654 freg_destroyed[out_regs[c_arg].first()->as_FloatRegister()->encoding()] = true; 1655 } 1656 #endif /* ASSERT */ 1657 switch (in_sig_bt[i]) { 1658 case T_ARRAY: 1659 if (is_critical_native) { 1660 unpack_array_argument(masm, in_regs[i], in_elem_bt[i], out_regs[c_arg + 1], out_regs[c_arg]); 1661 c_arg++; 1662 #ifdef ASSERT 1663 if (out_regs[c_arg].first()->is_Register()) { 1664 reg_destroyed[out_regs[c_arg].first()->as_Register()->encoding()] = true; 1665 } else if (out_regs[c_arg].first()->is_FloatRegister()) { 1666 freg_destroyed[out_regs[c_arg].first()->as_FloatRegister()->encoding()] = true; 1667 } 1668 #endif 1669 int_args++; 1670 break; 1671 } 1672 case T_OBJECT: 1673 assert(!is_critical_native, "no oop arguments"); 1674 object_move(masm, map, oop_handle_offset, stack_slots, in_regs[i], out_regs[c_arg], 1675 ((i == 0) && (!is_static)), 1676 &receiver_offset); 1677 int_args++; 1678 break; 1679 case T_VOID: 1680 break; 1681 1682 case T_FLOAT: 1683 float_move(masm, in_regs[i], out_regs[c_arg]); 1684 float_args++; 1685 break; 1686 1687 case T_DOUBLE: 1688 assert( i + 1 < total_in_args && 1689 in_sig_bt[i + 1] == T_VOID && 1690 out_sig_bt[c_arg+1] == T_VOID, "bad arg list"); 1691 double_move(masm, in_regs[i], out_regs[c_arg]); 1692 float_args++; 1693 break; 1694 1695 case T_LONG : 1696 long_move(masm, in_regs[i], out_regs[c_arg]); 1697 int_args++; 1698 break; 1699 1700 case T_ADDRESS: assert(false, "found T_ADDRESS in java args"); 1701 1702 default: 1703 move32_64(masm, in_regs[i], out_regs[c_arg]); 1704 int_args++; 1705 } 1706 } 1707 1708 // point c_arg at the first arg that is already loaded in case we 1709 // need to spill before we call out 1710 int c_arg = total_c_args - total_in_args; 1711 1712 // Pre-load a static method's oop into r20. Used both by locking code and 1713 // the normal JNI call code. 1714 if (method->is_static() && !is_critical_native) { 1715 1716 // load oop into a register 1717 __ movoop(oop_handle_reg, 1718 JNIHandles::make_local(method->method_holder()->java_mirror()), 1719 /*immediate*/true); 1720 1721 // Now handlize the static class mirror it's known not-null. 1722 __ str(oop_handle_reg, Address(sp, klass_offset)); 1723 map->set_oop(VMRegImpl::stack2reg(klass_slot_offset)); 1724 1725 // Now get the handle 1726 __ lea(oop_handle_reg, Address(sp, klass_offset)); 1727 // store the klass handle as second argument 1728 __ mov(c_rarg1, oop_handle_reg); 1729 // and protect the arg if we must spill 1730 c_arg--; 1731 } 1732 1733 // Change state to native (we save the return address in the thread, since it might not 1734 // be pushed on the stack when we do a a stack traversal). It is enough that the pc() 1735 // points into the right code segment. It does not have to be the correct return pc. 1736 // We use the same pc/oopMap repeatedly when we call out 1737 1738 intptr_t the_pc = (intptr_t) __ pc(); 1739 oop_maps->add_gc_map(the_pc - start, map); 1740 1741 __ set_last_Java_frame(sp, noreg, (address)the_pc, rscratch1); 1742 1743 1744 // We have all of the arguments setup at this point. We must not touch any register 1745 // argument registers at this point (what if we save/restore them there are no oop? 1746 1747 { 1748 SkipIfEqual skip(masm, &DTraceMethodProbes, false); 1749 // protect the args we've loaded 1750 save_args(masm, total_c_args, c_arg, out_regs); 1751 __ mov_metadata(c_rarg1, method()); 1752 __ call_VM_leaf( 1753 CAST_FROM_FN_PTR(address, SharedRuntime::dtrace_method_entry), 1754 rthread, c_rarg1); 1755 restore_args(masm, total_c_args, c_arg, out_regs); 1756 } 1757 1758 // RedefineClasses() tracing support for obsolete method entry 1759 if (RC_TRACE_IN_RANGE(0x00001000, 0x00002000)) { 1760 // protect the args we've loaded 1761 save_args(masm, total_c_args, c_arg, out_regs); 1762 __ mov_metadata(c_rarg1, method()); 1763 __ call_VM_leaf( 1764 CAST_FROM_FN_PTR(address, SharedRuntime::rc_trace_method_entry), 1765 rthread, c_rarg1); 1766 restore_args(masm, total_c_args, c_arg, out_regs); 1767 } 1768 1769 // Lock a synchronized method 1770 1771 // Register definitions used by locking and unlocking 1772 1773 const Register swap_reg = r0; 1774 const Register obj_reg = r19; // Will contain the oop 1775 const Register lock_reg = r13; // Address of compiler lock object (BasicLock) 1776 const Register old_hdr = r13; // value of old header at unlock time 1777 1778 Label slow_path_lock; 1779 Label lock_done; 1780 1781 if (method->is_synchronized()) { 1782 assert(!is_critical_native, "unhandled"); 1783 1784 1785 const int mark_word_offset = BasicLock::displaced_header_offset_in_bytes(); 1786 1787 // Get the handle (the 2nd argument) 1788 __ mov(oop_handle_reg, c_rarg1); 1789 1790 // Get address of the box 1791 1792 __ lea(lock_reg, Address(sp, lock_slot_offset * VMRegImpl::stack_slot_size)); 1793 1794 // Load the oop from the handle 1795 __ ldr(obj_reg, Address(oop_handle_reg, 0)); 1796 1797 if (UseBiasedLocking) { 1798 __ biased_locking_enter(lock_reg, obj_reg, swap_reg, rscratch2, false, lock_done, &slow_path_lock); 1799 } 1800 1801 // Load (object->mark() | 1) into swap_reg %r0 1802 __ ldr(rscratch1, Address(obj_reg, 0)); 1803 __ orr(swap_reg, rscratch1, 1); 1804 1805 // Save (object->mark() | 1) into BasicLock's displaced header 1806 __ str(swap_reg, Address(lock_reg, mark_word_offset)); 1807 1808 // src -> dest iff dest == r0 else r0 <- dest 1809 { Label here; 1810 __ cmpxchgptr(r0, lock_reg, obj_reg, rscratch1, lock_done, /*fallthrough*/NULL); 1811 } 1812 1813 // Hmm should this move to the slow path code area??? 1814 1815 // Test if the oopMark is an obvious stack pointer, i.e., 1816 // 1) (mark & 3) == 0, and 1817 // 2) sp <= mark < mark + os::pagesize() 1818 // These 3 tests can be done by evaluating the following 1819 // expression: ((mark - sp) & (3 - os::vm_page_size())), 1820 // assuming both stack pointer and pagesize have their 1821 // least significant 2 bits clear. 1822 // NOTE: the oopMark is in swap_reg %r0 as the result of cmpxchg 1823 1824 __ sub(swap_reg, sp, swap_reg); 1825 __ neg(swap_reg, swap_reg); 1826 __ ands(swap_reg, swap_reg, 3 - os::vm_page_size()); 1827 1828 // Save the test result, for recursive case, the result is zero 1829 __ str(swap_reg, Address(lock_reg, mark_word_offset)); 1830 __ br(Assembler::NE, slow_path_lock); 1831 1832 // Slow path will re-enter here 1833 1834 __ bind(lock_done); 1835 } 1836 1837 1838 // Finally just about ready to make the JNI call 1839 1840 1841 // get JNIEnv* which is first argument to native 1842 if (!is_critical_native) { 1843 __ lea(c_rarg0, Address(rthread, in_bytes(JavaThread::jni_environment_offset()))); 1844 } 1845 1846 // Now set thread in native 1847 __ mov(rscratch1, _thread_in_native); 1848 __ lea(rscratch2, Address(rthread, JavaThread::thread_state_offset())); 1849 __ stlrw(rscratch1, rscratch2); 1850 1851 { 1852 int return_type = 0; 1853 switch (ret_type) { 1854 case T_VOID: break; 1855 return_type = 0; break; 1856 case T_CHAR: 1857 case T_BYTE: 1858 case T_SHORT: 1859 case T_INT: 1860 case T_BOOLEAN: 1861 case T_LONG: 1862 return_type = 1; break; 1863 case T_ARRAY: 1864 case T_OBJECT: 1865 return_type = 1; break; 1866 case T_FLOAT: 1867 return_type = 2; break; 1868 case T_DOUBLE: 1869 return_type = 3; break; 1870 default: 1871 ShouldNotReachHere(); 1872 } 1873 rt_call(masm, native_func, 1874 int_args + 2, // AArch64 passes up to 8 args in int registers 1875 float_args, // and up to 8 float args 1876 return_type); 1877 } 1878 1879 // Unpack native results. 1880 switch (ret_type) { 1881 case T_BOOLEAN: __ ubfx(r0, r0, 0, 8); break; 1882 case T_CHAR : __ ubfx(r0, r0, 0, 16); break; 1883 case T_BYTE : __ sbfx(r0, r0, 0, 8); break; 1884 case T_SHORT : __ sbfx(r0, r0, 0, 16); break; 1885 case T_INT : __ sbfx(r0, r0, 0, 32); break; 1886 case T_DOUBLE : 1887 case T_FLOAT : 1888 // Result is in v0 we'll save as needed 1889 break; 1890 case T_ARRAY: // Really a handle 1891 case T_OBJECT: // Really a handle 1892 break; // can't de-handlize until after safepoint check 1893 case T_VOID: break; 1894 case T_LONG: break; 1895 default : ShouldNotReachHere(); 1896 } 1897 1898 // Switch thread to "native transition" state before reading the synchronization state. 1899 // This additional state is necessary because reading and testing the synchronization 1900 // state is not atomic w.r.t. GC, as this scenario demonstrates: 1901 // Java thread A, in _thread_in_native state, loads _not_synchronized and is preempted. 1902 // VM thread changes sync state to synchronizing and suspends threads for GC. 1903 // Thread A is resumed to finish this native method, but doesn't block here since it 1904 // didn't see any synchronization is progress, and escapes. 1905 __ mov(rscratch1, _thread_in_native_trans); 1906 __ lea(rscratch2, Address(rthread, JavaThread::thread_state_offset())); 1907 __ stlrw(rscratch1, rscratch2); 1908 1909 if(os::is_MP()) { 1910 if (UseMembar) { 1911 // Force this write out before the read below 1912 __ dmb(Assembler::SY); 1913 } else { 1914 // Write serialization page so VM thread can do a pseudo remote membar. 1915 // We use the current thread pointer to calculate a thread specific 1916 // offset to write to within the page. This minimizes bus traffic 1917 // due to cache line collision. 1918 __ serialize_memory(rthread, r2); 1919 } 1920 } 1921 1922 Label after_transition; 1923 1924 // check for safepoint operation in progress and/or pending suspend requests 1925 { 1926 Label Continue; 1927 1928 { unsigned long offset; 1929 __ adrp(rscratch1, 1930 ExternalAddress((address)SafepointSynchronize::address_of_state()), 1931 offset); 1932 __ ldrw(rscratch1, Address(rscratch1, offset)); 1933 } 1934 __ cmpw(rscratch1, SafepointSynchronize::_not_synchronized); 1935 1936 Label L; 1937 __ br(Assembler::NE, L); 1938 __ ldrw(rscratch1, Address(rthread, JavaThread::suspend_flags_offset())); 1939 __ cbz(rscratch1, Continue); 1940 __ bind(L); 1941 1942 // Don't use call_VM as it will see a possible pending exception and forward it 1943 // and never return here preventing us from clearing _last_native_pc down below. 1944 // 1945 save_native_result(masm, ret_type, stack_slots); 1946 __ mov(c_rarg0, rthread); 1947 #ifndef PRODUCT 1948 assert(frame::arg_reg_save_area_bytes == 0, "not expecting frame reg save area"); 1949 #endif 1950 if (!is_critical_native) { 1951 __ lea(rscratch1, RuntimeAddress(CAST_FROM_FN_PTR(address, JavaThread::check_special_condition_for_native_trans))); 1952 } else { 1953 __ lea(rscratch1, RuntimeAddress(CAST_FROM_FN_PTR(address, JavaThread::check_special_condition_for_native_trans_and_transition))); 1954 } 1955 __ blrt(rscratch1, 1, 0, 1); 1956 __ maybe_isb(); 1957 // Restore any method result value 1958 restore_native_result(masm, ret_type, stack_slots); 1959 1960 if (is_critical_native) { 1961 // The call above performed the transition to thread_in_Java so 1962 // skip the transition logic below. 1963 __ b(after_transition); 1964 } 1965 1966 __ bind(Continue); 1967 } 1968 1969 // change thread state 1970 __ mov(rscratch1, _thread_in_Java); 1971 __ lea(rscratch2, Address(rthread, JavaThread::thread_state_offset())); 1972 __ stlrw(rscratch1, rscratch2); 1973 __ bind(after_transition); 1974 1975 Label reguard; 1976 Label reguard_done; 1977 __ ldrb(rscratch1, Address(rthread, JavaThread::stack_guard_state_offset())); 1978 __ cmpw(rscratch1, JavaThread::stack_guard_yellow_disabled); 1979 __ br(Assembler::EQ, reguard); 1980 __ bind(reguard_done); 1981 1982 // native result if any is live 1983 1984 // Unlock 1985 Label unlock_done; 1986 Label slow_path_unlock; 1987 if (method->is_synchronized()) { 1988 1989 // Get locked oop from the handle we passed to jni 1990 __ ldr(obj_reg, Address(oop_handle_reg, 0)); 1991 1992 Label done; 1993 1994 if (UseBiasedLocking) { 1995 __ biased_locking_exit(obj_reg, old_hdr, done); 1996 } 1997 1998 // Simple recursive lock? 1999 2000 __ ldr(rscratch1, Address(sp, lock_slot_offset * VMRegImpl::stack_slot_size)); 2001 __ cbz(rscratch1, done); 2002 2003 // Must save r0 if if it is live now because cmpxchg must use it 2004 if (ret_type != T_FLOAT && ret_type != T_DOUBLE && ret_type != T_VOID) { 2005 save_native_result(masm, ret_type, stack_slots); 2006 } 2007 2008 2009 // get address of the stack lock 2010 __ lea(r0, Address(sp, lock_slot_offset * VMRegImpl::stack_slot_size)); 2011 // get old displaced header 2012 __ ldr(old_hdr, Address(r0, 0)); 2013 2014 // Atomic swap old header if oop still contains the stack lock 2015 Label succeed; 2016 __ cmpxchgptr(r0, old_hdr, obj_reg, rscratch1, succeed, &slow_path_unlock); 2017 __ bind(succeed); 2018 2019 // slow path re-enters here 2020 __ bind(unlock_done); 2021 if (ret_type != T_FLOAT && ret_type != T_DOUBLE && ret_type != T_VOID) { 2022 restore_native_result(masm, ret_type, stack_slots); 2023 } 2024 2025 __ bind(done); 2026 2027 } 2028 { 2029 SkipIfEqual skip(masm, &DTraceMethodProbes, false); 2030 save_native_result(masm, ret_type, stack_slots); 2031 __ mov_metadata(c_rarg1, method()); 2032 __ call_VM_leaf( 2033 CAST_FROM_FN_PTR(address, SharedRuntime::dtrace_method_exit), 2034 rthread, c_rarg1); 2035 restore_native_result(masm, ret_type, stack_slots); 2036 } 2037 2038 __ reset_last_Java_frame(false, true); 2039 2040 // Unpack oop result 2041 if (ret_type == T_OBJECT || ret_type == T_ARRAY) { 2042 Label L; 2043 __ cbz(r0, L); 2044 __ ldr(r0, Address(r0, 0)); 2045 __ bind(L); 2046 __ verify_oop(r0); 2047 } 2048 2049 if (!is_critical_native) { 2050 // reset handle block 2051 __ ldr(r2, Address(rthread, JavaThread::active_handles_offset())); 2052 __ str(zr, Address(r2, JNIHandleBlock::top_offset_in_bytes())); 2053 } 2054 2055 __ leave(); 2056 2057 if (!is_critical_native) { 2058 // Any exception pending? 2059 __ ldr(rscratch1, Address(rthread, in_bytes(Thread::pending_exception_offset()))); 2060 __ cbnz(rscratch1, exception_pending); 2061 } 2062 2063 // record exit from native wrapper code 2064 if (NotifySimulator) { 2065 __ notify(Assembler::method_reentry); 2066 } 2067 2068 // We're done 2069 __ ret(lr); 2070 2071 // Unexpected paths are out of line and go here 2072 2073 if (!is_critical_native) { 2074 // forward the exception 2075 __ bind(exception_pending); 2076 2077 // and forward the exception 2078 __ far_jump(RuntimeAddress(StubRoutines::forward_exception_entry())); 2079 } 2080 2081 // Slow path locking & unlocking 2082 if (method->is_synchronized()) { 2083 2084 // BEGIN Slow path lock 2085 __ bind(slow_path_lock); 2086 2087 // has last_Java_frame setup. No exceptions so do vanilla call not call_VM 2088 // args are (oop obj, BasicLock* lock, JavaThread* thread) 2089 2090 // protect the args we've loaded 2091 save_args(masm, total_c_args, c_arg, out_regs); 2092 2093 __ mov(c_rarg0, obj_reg); 2094 __ mov(c_rarg1, lock_reg); 2095 __ mov(c_rarg2, rthread); 2096 2097 // Not a leaf but we have last_Java_frame setup as we want 2098 __ call_VM_leaf(CAST_FROM_FN_PTR(address, SharedRuntime::complete_monitor_locking_C), 3); 2099 restore_args(masm, total_c_args, c_arg, out_regs); 2100 2101 #ifdef ASSERT 2102 { Label L; 2103 __ ldr(rscratch1, Address(rthread, in_bytes(Thread::pending_exception_offset()))); 2104 __ cbz(rscratch1, L); 2105 __ stop("no pending exception allowed on exit from monitorenter"); 2106 __ bind(L); 2107 } 2108 #endif 2109 __ b(lock_done); 2110 2111 // END Slow path lock 2112 2113 // BEGIN Slow path unlock 2114 __ bind(slow_path_unlock); 2115 2116 // If we haven't already saved the native result we must save it now as xmm registers 2117 // are still exposed. 2118 2119 if (ret_type == T_FLOAT || ret_type == T_DOUBLE ) { 2120 save_native_result(masm, ret_type, stack_slots); 2121 } 2122 2123 __ mov(c_rarg2, rthread); 2124 __ lea(c_rarg1, Address(sp, lock_slot_offset * VMRegImpl::stack_slot_size)); 2125 __ mov(c_rarg0, obj_reg); 2126 2127 // Save pending exception around call to VM (which contains an EXCEPTION_MARK) 2128 // NOTE that obj_reg == r19 currently 2129 __ ldr(r19, Address(rthread, in_bytes(Thread::pending_exception_offset()))); 2130 __ str(zr, Address(rthread, in_bytes(Thread::pending_exception_offset()))); 2131 2132 rt_call(masm, CAST_FROM_FN_PTR(address, SharedRuntime::complete_monitor_unlocking_C), 3, 0, 1); 2133 2134 #ifdef ASSERT 2135 { 2136 Label L; 2137 __ ldr(rscratch1, Address(rthread, in_bytes(Thread::pending_exception_offset()))); 2138 __ cbz(rscratch1, L); 2139 __ stop("no pending exception allowed on exit complete_monitor_unlocking_C"); 2140 __ bind(L); 2141 } 2142 #endif /* ASSERT */ 2143 2144 __ str(r19, Address(rthread, in_bytes(Thread::pending_exception_offset()))); 2145 2146 if (ret_type == T_FLOAT || ret_type == T_DOUBLE ) { 2147 restore_native_result(masm, ret_type, stack_slots); 2148 } 2149 __ b(unlock_done); 2150 2151 // END Slow path unlock 2152 2153 } // synchronized 2154 2155 // SLOW PATH Reguard the stack if needed 2156 2157 __ bind(reguard); 2158 save_native_result(masm, ret_type, stack_slots); 2159 rt_call(masm, CAST_FROM_FN_PTR(address, SharedRuntime::reguard_yellow_pages), 0, 0, 0); 2160 restore_native_result(masm, ret_type, stack_slots); 2161 // and continue 2162 __ b(reguard_done); 2163 2164 2165 2166 __ flush(); 2167 2168 nmethod *nm = nmethod::new_native_nmethod(method, 2169 compile_id, 2170 masm->code(), 2171 vep_offset, 2172 frame_complete, 2173 stack_slots / VMRegImpl::slots_per_word, 2174 (is_static ? in_ByteSize(klass_offset) : in_ByteSize(receiver_offset)), 2175 in_ByteSize(lock_slot_offset*VMRegImpl::stack_slot_size), 2176 oop_maps); 2177 2178 if (is_critical_native) { 2179 nm->set_lazy_critical_native(true); 2180 } 2181 2182 return nm; 2183 2184 } 2185 2186 // this function returns the adjust size (in number of words) to a c2i adapter 2187 // activation for use during deoptimization 2188 int Deoptimization::last_frame_adjust(int callee_parameters, int callee_locals) { 2189 assert(callee_locals >= callee_parameters, 2190 "test and remove; got more parms than locals"); 2191 if (callee_locals < callee_parameters) 2192 return 0; // No adjustment for negative locals 2193 int diff = (callee_locals - callee_parameters) * Interpreter::stackElementWords; 2194 // diff is counted in stack words 2195 return round_to(diff, 2); 2196 } 2197 2198 2199 //------------------------------generate_deopt_blob---------------------------- 2200 void SharedRuntime::generate_deopt_blob() { 2201 // Allocate space for the code 2202 ResourceMark rm; 2203 // Setup code generation tools 2204 CodeBuffer buffer("deopt_blob", 2048, 1024); 2205 MacroAssembler* masm = new MacroAssembler(&buffer); 2206 int frame_size_in_words; 2207 OopMap* map = NULL; 2208 OopMapSet *oop_maps = new OopMapSet(); 2209 2210 #ifdef BUILTIN_SIM 2211 AArch64Simulator *simulator; 2212 if (NotifySimulator) { 2213 simulator = AArch64Simulator::get_current(UseSimulatorCache, DisableBCCheck); 2214 simulator->notifyCompile(const_cast<char*>("SharedRuntime::deopt_blob"), __ pc()); 2215 } 2216 #endif 2217 2218 // ------------- 2219 // This code enters when returning to a de-optimized nmethod. A return 2220 // address has been pushed on the the stack, and return values are in 2221 // registers. 2222 // If we are doing a normal deopt then we were called from the patched 2223 // nmethod from the point we returned to the nmethod. So the return 2224 // address on the stack is wrong by NativeCall::instruction_size 2225 // We will adjust the value so it looks like we have the original return 2226 // address on the stack (like when we eagerly deoptimized). 2227 // In the case of an exception pending when deoptimizing, we enter 2228 // with a return address on the stack that points after the call we patched 2229 // into the exception handler. We have the following register state from, 2230 // e.g., the forward exception stub (see stubGenerator_x86_64.cpp). 2231 // r0: exception oop 2232 // r19: exception handler 2233 // r3: throwing pc 2234 // So in this case we simply jam r3 into the useless return address and 2235 // the stack looks just like we want. 2236 // 2237 // At this point we need to de-opt. We save the argument return 2238 // registers. We call the first C routine, fetch_unroll_info(). This 2239 // routine captures the return values and returns a structure which 2240 // describes the current frame size and the sizes of all replacement frames. 2241 // The current frame is compiled code and may contain many inlined 2242 // functions, each with their own JVM state. We pop the current frame, then 2243 // push all the new frames. Then we call the C routine unpack_frames() to 2244 // populate these frames. Finally unpack_frames() returns us the new target 2245 // address. Notice that callee-save registers are BLOWN here; they have 2246 // already been captured in the vframeArray at the time the return PC was 2247 // patched. 2248 address start = __ pc(); 2249 Label cont; 2250 2251 // Prolog for non exception case! 2252 2253 // Save everything in sight. 2254 map = RegisterSaver::save_live_registers(masm, 0, &frame_size_in_words); 2255 2256 // Normal deoptimization. Save exec mode for unpack_frames. 2257 __ movw(rcpool, Deoptimization::Unpack_deopt); // callee-saved 2258 __ b(cont); 2259 2260 int reexecute_offset = __ pc() - start; 2261 2262 // Reexecute case 2263 // return address is the pc describes what bci to do re-execute at 2264 2265 // No need to update map as each call to save_live_registers will produce identical oopmap 2266 (void) RegisterSaver::save_live_registers(masm, 0, &frame_size_in_words); 2267 2268 __ movw(rcpool, Deoptimization::Unpack_reexecute); // callee-saved 2269 __ b(cont); 2270 2271 int exception_offset = __ pc() - start; 2272 2273 // Prolog for exception case 2274 2275 // all registers are dead at this entry point, except for r0, and 2276 // r3 which contain the exception oop and exception pc 2277 // respectively. Set them in TLS and fall thru to the 2278 // unpack_with_exception_in_tls entry point. 2279 2280 __ str(r3, Address(rthread, JavaThread::exception_pc_offset())); 2281 __ str(r0, Address(rthread, JavaThread::exception_oop_offset())); 2282 2283 int exception_in_tls_offset = __ pc() - start; 2284 2285 // new implementation because exception oop is now passed in JavaThread 2286 2287 // Prolog for exception case 2288 // All registers must be preserved because they might be used by LinearScan 2289 // Exceptiop oop and throwing PC are passed in JavaThread 2290 // tos: stack at point of call to method that threw the exception (i.e. only 2291 // args are on the stack, no return address) 2292 2293 // The return address pushed by save_live_registers will be patched 2294 // later with the throwing pc. The correct value is not available 2295 // now because loading it from memory would destroy registers. 2296 2297 // NB: The SP at this point must be the SP of the method that is 2298 // being deoptimized. Deoptimization assumes that the frame created 2299 // here by save_live_registers is immediately below the method's SP. 2300 // This is a somewhat fragile mechanism. 2301 2302 // Save everything in sight. 2303 map = RegisterSaver::save_live_registers(masm, 0, &frame_size_in_words); 2304 2305 // Now it is safe to overwrite any register 2306 2307 // Deopt during an exception. Save exec mode for unpack_frames. 2308 __ mov(rcpool, Deoptimization::Unpack_exception); // callee-saved 2309 2310 // load throwing pc from JavaThread and patch it as the return address 2311 // of the current frame. Then clear the field in JavaThread 2312 2313 __ ldr(r3, Address(rthread, JavaThread::exception_pc_offset())); 2314 __ str(r3, Address(rfp, wordSize)); 2315 __ str(zr, Address(rthread, JavaThread::exception_pc_offset())); 2316 2317 #ifdef ASSERT 2318 // verify that there is really an exception oop in JavaThread 2319 __ ldr(r0, Address(rthread, JavaThread::exception_oop_offset())); 2320 __ verify_oop(r0); 2321 2322 // verify that there is no pending exception 2323 Label no_pending_exception; 2324 __ ldr(rscratch1, Address(rthread, Thread::pending_exception_offset())); 2325 __ cbz(rscratch1, no_pending_exception); 2326 __ stop("must not have pending exception here"); 2327 __ bind(no_pending_exception); 2328 #endif 2329 2330 __ bind(cont); 2331 2332 // Call C code. Need thread and this frame, but NOT official VM entry 2333 // crud. We cannot block on this call, no GC can happen. 2334 // 2335 // UnrollBlock* fetch_unroll_info(JavaThread* thread) 2336 2337 // fetch_unroll_info needs to call last_java_frame(). 2338 2339 Label retaddr; 2340 __ set_last_Java_frame(sp, noreg, retaddr, rscratch1); 2341 #ifdef ASSERT0 2342 { Label L; 2343 __ ldr(rscratch1, Address(rthread, 2344 JavaThread::last_Java_fp_offset())); 2345 __ cbz(rscratch1, L); 2346 __ stop("SharedRuntime::generate_deopt_blob: last_Java_fp not cleared"); 2347 __ bind(L); 2348 } 2349 #endif // ASSERT 2350 __ mov(c_rarg0, rthread); 2351 __ lea(rscratch1, RuntimeAddress(CAST_FROM_FN_PTR(address, Deoptimization::fetch_unroll_info))); 2352 __ blrt(rscratch1, 1, 0, 1); 2353 __ bind(retaddr); 2354 2355 // Need to have an oopmap that tells fetch_unroll_info where to 2356 // find any register it might need. 2357 oop_maps->add_gc_map(__ pc() - start, map); 2358 2359 __ reset_last_Java_frame(false, true); 2360 2361 // Load UnrollBlock* into rdi 2362 __ mov(r5, r0); 2363 2364 Label noException; 2365 __ cmpw(rcpool, Deoptimization::Unpack_exception); // Was exception pending? 2366 __ br(Assembler::NE, noException); 2367 __ ldr(r0, Address(rthread, JavaThread::exception_oop_offset())); 2368 // QQQ this is useless it was NULL above 2369 __ ldr(r3, Address(rthread, JavaThread::exception_pc_offset())); 2370 __ str(zr, Address(rthread, JavaThread::exception_oop_offset())); 2371 __ str(zr, Address(rthread, JavaThread::exception_pc_offset())); 2372 2373 __ verify_oop(r0); 2374 2375 // Overwrite the result registers with the exception results. 2376 __ str(r0, Address(sp, RegisterSaver::r0_offset_in_bytes())); 2377 // I think this is useless 2378 // __ str(r3, Address(sp, RegisterSaver::r3_offset_in_bytes())); 2379 2380 __ bind(noException); 2381 2382 // Only register save data is on the stack. 2383 // Now restore the result registers. Everything else is either dead 2384 // or captured in the vframeArray. 2385 RegisterSaver::restore_result_registers(masm); 2386 2387 // All of the register save area has been popped of the stack. Only the 2388 // return address remains. 2389 2390 // Pop all the frames we must move/replace. 2391 // 2392 // Frame picture (youngest to oldest) 2393 // 1: self-frame (no frame link) 2394 // 2: deopting frame (no frame link) 2395 // 3: caller of deopting frame (could be compiled/interpreted). 2396 // 2397 // Note: by leaving the return address of self-frame on the stack 2398 // and using the size of frame 2 to adjust the stack 2399 // when we are done the return to frame 3 will still be on the stack. 2400 2401 // Pop deoptimized frame 2402 __ ldrw(r2, Address(r5, Deoptimization::UnrollBlock::size_of_deoptimized_frame_offset_in_bytes())); 2403 __ sub(r2, r2, 2 * wordSize); 2404 __ add(sp, sp, r2); 2405 __ ldp(rfp, lr, __ post(sp, 2 * wordSize)); 2406 // LR should now be the return address to the caller (3) 2407 2408 #ifdef ASSERT 2409 // Compilers generate code that bang the stack by as much as the 2410 // interpreter would need. So this stack banging should never 2411 // trigger a fault. Verify that it does not on non product builds. 2412 if (UseStackBanging) { 2413 __ ldrw(r19, Address(r5, Deoptimization::UnrollBlock::total_frame_sizes_offset_in_bytes())); 2414 __ bang_stack_size(r19, r2); 2415 } 2416 #endif 2417 // Load address of array of frame pcs into r2 2418 __ ldr(r2, Address(r5, Deoptimization::UnrollBlock::frame_pcs_offset_in_bytes())); 2419 2420 // Trash the old pc 2421 // __ addptr(sp, wordSize); FIXME ???? 2422 2423 // Load address of array of frame sizes into r4 2424 __ ldr(r4, Address(r5, Deoptimization::UnrollBlock::frame_sizes_offset_in_bytes())); 2425 2426 // Load counter into r3 2427 __ ldrw(r3, Address(r5, Deoptimization::UnrollBlock::number_of_frames_offset_in_bytes())); 2428 2429 // Now adjust the caller's stack to make up for the extra locals 2430 // but record the original sp so that we can save it in the skeletal interpreter 2431 // frame and the stack walking of interpreter_sender will get the unextended sp 2432 // value and not the "real" sp value. 2433 2434 const Register sender_sp = r6; 2435 2436 __ mov(sender_sp, sp); 2437 __ ldrw(r19, Address(r5, 2438 Deoptimization::UnrollBlock:: 2439 caller_adjustment_offset_in_bytes())); 2440 __ sub(sp, sp, r19); 2441 2442 // Push interpreter frames in a loop 2443 __ mov(rscratch1, (address)0xDEADDEAD); // Make a recognizable pattern 2444 __ mov(rscratch2, rscratch1); 2445 Label loop; 2446 __ bind(loop); 2447 __ ldr(r19, Address(__ post(r4, wordSize))); // Load frame size 2448 __ sub(r19, r19, 2*wordSize); // We'll push pc and fp by hand 2449 __ ldr(lr, Address(__ post(r2, wordSize))); // Load pc 2450 __ enter(); // Save old & set new fp 2451 __ sub(sp, sp, r19); // Prolog 2452 // This value is corrected by layout_activation_impl 2453 __ str(zr, Address(rfp, frame::interpreter_frame_last_sp_offset * wordSize)); 2454 __ str(sender_sp, Address(rfp, frame::interpreter_frame_sender_sp_offset * wordSize)); // Make it walkable 2455 __ mov(sender_sp, sp); // Pass sender_sp to next frame 2456 __ sub(r3, r3, 1); // Decrement counter 2457 __ cbnz(r3, loop); 2458 2459 // Re-push self-frame 2460 __ ldr(lr, Address(r2)); 2461 __ enter(); 2462 2463 // Allocate a full sized register save area. We subtract 2 because 2464 // enter() just pushed 2 words 2465 __ sub(sp, sp, (frame_size_in_words - 2) * wordSize); 2466 2467 // Restore frame locals after moving the frame 2468 __ strd(v0, Address(sp, RegisterSaver::v0_offset_in_bytes())); 2469 __ str(r0, Address(sp, RegisterSaver::r0_offset_in_bytes())); 2470 2471 // Call C code. Need thread but NOT official VM entry 2472 // crud. We cannot block on this call, no GC can happen. Call should 2473 // restore return values to their stack-slots with the new SP. 2474 // 2475 // void Deoptimization::unpack_frames(JavaThread* thread, int exec_mode) 2476 2477 // Use rfp because the frames look interpreted now 2478 // Don't need the precise return PC here, just precise enough to point into this code blob. 2479 address the_pc = __ pc(); 2480 __ set_last_Java_frame(sp, rfp, the_pc, rscratch1); 2481 2482 __ mov(c_rarg0, rthread); 2483 __ movw(c_rarg1, rcpool); // second arg: exec_mode 2484 __ lea(rscratch1, RuntimeAddress(CAST_FROM_FN_PTR(address, Deoptimization::unpack_frames))); 2485 __ blrt(rscratch1, 2, 0, 0); 2486 2487 // Set an oopmap for the call site 2488 // Use the same PC we used for the last java frame 2489 oop_maps->add_gc_map(the_pc - start, 2490 new OopMap( frame_size_in_words, 0 )); 2491 2492 // Clear fp AND pc 2493 __ reset_last_Java_frame(true, true); 2494 2495 // Collect return values 2496 __ ldrd(v0, Address(sp, RegisterSaver::v0_offset_in_bytes())); 2497 __ ldr(r0, Address(sp, RegisterSaver::r0_offset_in_bytes())); 2498 // I think this is useless (throwing pc?) 2499 // __ ldr(r3, Address(sp, RegisterSaver::r3_offset_in_bytes())); 2500 2501 // Pop self-frame. 2502 __ leave(); // Epilog 2503 2504 // Jump to interpreter 2505 __ ret(lr); 2506 2507 // Make sure all code is generated 2508 masm->flush(); 2509 2510 _deopt_blob = DeoptimizationBlob::create(&buffer, oop_maps, 0, exception_offset, reexecute_offset, frame_size_in_words); 2511 _deopt_blob->set_unpack_with_exception_in_tls_offset(exception_in_tls_offset); 2512 2513 #ifdef BUILTIN_SIM 2514 if (NotifySimulator) { 2515 unsigned char *base = _deopt_blob->code_begin(); 2516 simulator->notifyRelocate(start, base - start); 2517 } 2518 #endif 2519 } 2520 2521 uint SharedRuntime::out_preserve_stack_slots() { 2522 return 0; 2523 } 2524 2525 #ifdef COMPILER2 2526 //------------------------------generate_uncommon_trap_blob-------------------- 2527 void SharedRuntime::generate_uncommon_trap_blob() { 2528 // Allocate space for the code 2529 ResourceMark rm; 2530 // Setup code generation tools 2531 CodeBuffer buffer("uncommon_trap_blob", 2048, 1024); 2532 MacroAssembler* masm = new MacroAssembler(&buffer); 2533 2534 #ifdef BUILTIN_SIM 2535 AArch64Simulator *simulator; 2536 if (NotifySimulator) { 2537 simulator = AArch64Simulator::get_current(UseSimulatorCache, DisableBCCheck); 2538 simulator->notifyCompile(const_cast<char*>("SharedRuntime:uncommon_trap_blob"), __ pc()); 2539 } 2540 #endif 2541 2542 assert(SimpleRuntimeFrame::framesize % 4 == 0, "sp not 16-byte aligned"); 2543 2544 address start = __ pc(); 2545 2546 // Push self-frame. We get here with a return address in LR 2547 // and sp should be 16 byte aligned 2548 // push rfp and retaddr by hand 2549 __ stp(rfp, lr, Address(__ pre(sp, -2 * wordSize))); 2550 // we don't expect an arg reg save area 2551 #ifndef PRODUCT 2552 assert(frame::arg_reg_save_area_bytes == 0, "not expecting frame reg save area"); 2553 #endif 2554 // compiler left unloaded_class_index in j_rarg0 move to where the 2555 // runtime expects it. 2556 if (c_rarg1 != j_rarg0) { 2557 __ movw(c_rarg1, j_rarg0); 2558 } 2559 2560 // we need to set the past SP to the stack pointer of the stub frame 2561 // and the pc to the address where this runtime call will return 2562 // although actually any pc in this code blob will do). 2563 Label retaddr; 2564 __ set_last_Java_frame(sp, noreg, retaddr, rscratch1); 2565 2566 // Call C code. Need thread but NOT official VM entry 2567 // crud. We cannot block on this call, no GC can happen. Call should 2568 // capture callee-saved registers as well as return values. 2569 // Thread is in rdi already. 2570 // 2571 // UnrollBlock* uncommon_trap(JavaThread* thread, jint unloaded_class_index); 2572 // 2573 // n.b. 2 gp args, 0 fp args, integral return type 2574 2575 __ mov(c_rarg0, rthread); 2576 __ lea(rscratch1, 2577 RuntimeAddress(CAST_FROM_FN_PTR(address, 2578 Deoptimization::uncommon_trap))); 2579 __ blrt(rscratch1, 2, 0, MacroAssembler::ret_type_integral); 2580 __ bind(retaddr); 2581 2582 // Set an oopmap for the call site 2583 OopMapSet* oop_maps = new OopMapSet(); 2584 OopMap* map = new OopMap(SimpleRuntimeFrame::framesize, 0); 2585 2586 // location of rfp is known implicitly by the frame sender code 2587 2588 oop_maps->add_gc_map(__ pc() - start, map); 2589 2590 __ reset_last_Java_frame(false, true); 2591 2592 // move UnrollBlock* into r4 2593 __ mov(r4, r0); 2594 2595 // Pop all the frames we must move/replace. 2596 // 2597 // Frame picture (youngest to oldest) 2598 // 1: self-frame (no frame link) 2599 // 2: deopting frame (no frame link) 2600 // 3: caller of deopting frame (could be compiled/interpreted). 2601 2602 // Pop self-frame. We have no frame, and must rely only on r0 and sp. 2603 __ add(sp, sp, (SimpleRuntimeFrame::framesize) << LogBytesPerInt); // Epilog! 2604 2605 // Pop deoptimized frame (int) 2606 __ ldrw(r2, Address(r4, 2607 Deoptimization::UnrollBlock:: 2608 size_of_deoptimized_frame_offset_in_bytes())); 2609 __ sub(r2, r2, 2 * wordSize); 2610 __ add(sp, sp, r2); 2611 __ ldp(rfp, lr, __ post(sp, 2 * wordSize)); 2612 // LR should now be the return address to the caller (3) frame 2613 2614 #ifdef ASSERT 2615 // Compilers generate code that bang the stack by as much as the 2616 // interpreter would need. So this stack banging should never 2617 // trigger a fault. Verify that it does not on non product builds. 2618 if (UseStackBanging) { 2619 __ ldrw(r1, Address(r4, 2620 Deoptimization::UnrollBlock:: 2621 total_frame_sizes_offset_in_bytes())); 2622 __ bang_stack_size(r1, r2); 2623 } 2624 #endif 2625 2626 // Load address of array of frame pcs into r2 (address*) 2627 __ ldr(r2, Address(r4, 2628 Deoptimization::UnrollBlock::frame_pcs_offset_in_bytes())); 2629 2630 // Load address of array of frame sizes into r5 (intptr_t*) 2631 __ ldr(r5, Address(r4, 2632 Deoptimization::UnrollBlock:: 2633 frame_sizes_offset_in_bytes())); 2634 2635 // Counter 2636 __ ldrw(r3, Address(r4, 2637 Deoptimization::UnrollBlock:: 2638 number_of_frames_offset_in_bytes())); // (int) 2639 2640 // Now adjust the caller's stack to make up for the extra locals but 2641 // record the original sp so that we can save it in the skeletal 2642 // interpreter frame and the stack walking of interpreter_sender 2643 // will get the unextended sp value and not the "real" sp value. 2644 2645 const Register sender_sp = r8; 2646 2647 __ mov(sender_sp, sp); 2648 __ ldrw(r1, Address(r4, 2649 Deoptimization::UnrollBlock:: 2650 caller_adjustment_offset_in_bytes())); // (int) 2651 __ sub(sp, sp, r1); 2652 2653 // Push interpreter frames in a loop 2654 Label loop; 2655 __ bind(loop); 2656 __ ldr(r1, Address(r5, 0)); // Load frame size 2657 __ sub(r1, r1, 2 * wordSize); // We'll push pc and rfp by hand 2658 __ ldr(lr, Address(r2, 0)); // Save return address 2659 __ enter(); // and old rfp & set new rfp 2660 __ sub(sp, sp, r1); // Prolog 2661 __ str(sender_sp, Address(rfp, frame::interpreter_frame_sender_sp_offset * wordSize)); // Make it walkable 2662 // This value is corrected by layout_activation_impl 2663 __ str(zr, Address(rfp, frame::interpreter_frame_last_sp_offset * wordSize)); 2664 __ mov(sender_sp, sp); // Pass sender_sp to next frame 2665 __ add(r5, r5, wordSize); // Bump array pointer (sizes) 2666 __ add(r2, r2, wordSize); // Bump array pointer (pcs) 2667 __ subsw(r3, r3, 1); // Decrement counter 2668 __ br(Assembler::GT, loop); 2669 __ ldr(lr, Address(r2, 0)); // save final return address 2670 // Re-push self-frame 2671 __ enter(); // & old rfp & set new rfp 2672 2673 // Use rfp because the frames look interpreted now 2674 // Save "the_pc" since it cannot easily be retrieved using the last_java_SP after we aligned SP. 2675 // Don't need the precise return PC here, just precise enough to point into this code blob. 2676 address the_pc = __ pc(); 2677 __ set_last_Java_frame(sp, rfp, the_pc, rscratch1); 2678 2679 // Call C code. Need thread but NOT official VM entry 2680 // crud. We cannot block on this call, no GC can happen. Call should 2681 // restore return values to their stack-slots with the new SP. 2682 // Thread is in rdi already. 2683 // 2684 // BasicType unpack_frames(JavaThread* thread, int exec_mode); 2685 // 2686 // n.b. 2 gp args, 0 fp args, integral return type 2687 2688 // sp should already be aligned 2689 __ mov(c_rarg0, rthread); 2690 __ movw(c_rarg1, (unsigned)Deoptimization::Unpack_uncommon_trap); 2691 __ lea(rscratch1, RuntimeAddress(CAST_FROM_FN_PTR(address, Deoptimization::unpack_frames))); 2692 __ blrt(rscratch1, 2, 0, MacroAssembler::ret_type_integral); 2693 2694 // Set an oopmap for the call site 2695 // Use the same PC we used for the last java frame 2696 oop_maps->add_gc_map(the_pc - start, new OopMap(SimpleRuntimeFrame::framesize, 0)); 2697 2698 // Clear fp AND pc 2699 __ reset_last_Java_frame(true, true); 2700 2701 // Pop self-frame. 2702 __ leave(); // Epilog 2703 2704 // Jump to interpreter 2705 __ ret(lr); 2706 2707 // Make sure all code is generated 2708 masm->flush(); 2709 2710 _uncommon_trap_blob = UncommonTrapBlob::create(&buffer, oop_maps, 2711 SimpleRuntimeFrame::framesize >> 1); 2712 2713 #ifdef BUILTIN_SIM 2714 if (NotifySimulator) { 2715 unsigned char *base = _deopt_blob->code_begin(); 2716 simulator->notifyRelocate(start, base - start); 2717 } 2718 #endif 2719 } 2720 #endif // COMPILER2 2721 2722 2723 //------------------------------generate_handler_blob------ 2724 // 2725 // Generate a special Compile2Runtime blob that saves all registers, 2726 // and setup oopmap. 2727 // 2728 SafepointBlob* SharedRuntime::generate_handler_blob(address call_ptr, int poll_type) { 2729 ResourceMark rm; 2730 OopMapSet *oop_maps = new OopMapSet(); 2731 OopMap* map; 2732 2733 // Allocate space for the code. Setup code generation tools. 2734 CodeBuffer buffer("handler_blob", 2048, 1024); 2735 MacroAssembler* masm = new MacroAssembler(&buffer); 2736 2737 address start = __ pc(); 2738 address call_pc = NULL; 2739 int frame_size_in_words; 2740 bool cause_return = (poll_type == POLL_AT_RETURN); 2741 bool save_vectors = (poll_type == POLL_AT_VECTOR_LOOP); 2742 2743 // Save registers, fpu state, and flags 2744 map = RegisterSaver::save_live_registers(masm, 0, &frame_size_in_words); 2745 2746 // The following is basically a call_VM. However, we need the precise 2747 // address of the call in order to generate an oopmap. Hence, we do all the 2748 // work outselves. 2749 2750 Label retaddr; 2751 __ set_last_Java_frame(sp, noreg, retaddr, rscratch1); 2752 2753 // The return address must always be correct so that frame constructor never 2754 // sees an invalid pc. 2755 2756 if (!cause_return) { 2757 // overwrite the return address pushed by save_live_registers 2758 __ ldr(c_rarg0, Address(rthread, JavaThread::saved_exception_pc_offset())); 2759 __ str(c_rarg0, Address(rfp, wordSize)); 2760 } 2761 2762 // Do the call 2763 __ mov(c_rarg0, rthread); 2764 __ lea(rscratch1, RuntimeAddress(call_ptr)); 2765 __ blrt(rscratch1, 1, 0, 1); 2766 __ bind(retaddr); 2767 2768 // Set an oopmap for the call site. This oopmap will map all 2769 // oop-registers and debug-info registers as callee-saved. This 2770 // will allow deoptimization at this safepoint to find all possible 2771 // debug-info recordings, as well as let GC find all oops. 2772 2773 oop_maps->add_gc_map( __ pc() - start, map); 2774 2775 Label noException; 2776 2777 __ reset_last_Java_frame(false, true); 2778 2779 __ maybe_isb(); 2780 __ membar(Assembler::LoadLoad | Assembler::LoadStore); 2781 2782 __ ldr(rscratch1, Address(rthread, Thread::pending_exception_offset())); 2783 __ cbz(rscratch1, noException); 2784 2785 // Exception pending 2786 2787 RegisterSaver::restore_live_registers(masm); 2788 2789 __ far_jump(RuntimeAddress(StubRoutines::forward_exception_entry())); 2790 2791 // No exception case 2792 __ bind(noException); 2793 2794 // Normal exit, restore registers and exit. 2795 RegisterSaver::restore_live_registers(masm); 2796 2797 __ ret(lr); 2798 2799 // Make sure all code is generated 2800 masm->flush(); 2801 2802 // Fill-out other meta info 2803 return SafepointBlob::create(&buffer, oop_maps, frame_size_in_words); 2804 } 2805 2806 // 2807 // generate_resolve_blob - call resolution (static/virtual/opt-virtual/ic-miss 2808 // 2809 // Generate a stub that calls into vm to find out the proper destination 2810 // of a java call. All the argument registers are live at this point 2811 // but since this is generic code we don't know what they are and the caller 2812 // must do any gc of the args. 2813 // 2814 RuntimeStub* SharedRuntime::generate_resolve_blob(address destination, const char* name) { 2815 assert (StubRoutines::forward_exception_entry() != NULL, "must be generated before"); 2816 2817 // allocate space for the code 2818 ResourceMark rm; 2819 2820 CodeBuffer buffer(name, 1000, 512); 2821 MacroAssembler* masm = new MacroAssembler(&buffer); 2822 2823 int frame_size_in_words; 2824 2825 OopMapSet *oop_maps = new OopMapSet(); 2826 OopMap* map = NULL; 2827 2828 int start = __ offset(); 2829 2830 map = RegisterSaver::save_live_registers(masm, 0, &frame_size_in_words); 2831 2832 int frame_complete = __ offset(); 2833 2834 { 2835 Label retaddr; 2836 __ set_last_Java_frame(sp, noreg, retaddr, rscratch1); 2837 2838 __ mov(c_rarg0, rthread); 2839 __ lea(rscratch1, RuntimeAddress(destination)); 2840 2841 __ blrt(rscratch1, 1, 0, 1); 2842 __ bind(retaddr); 2843 } 2844 2845 // Set an oopmap for the call site. 2846 // We need this not only for callee-saved registers, but also for volatile 2847 // registers that the compiler might be keeping live across a safepoint. 2848 2849 oop_maps->add_gc_map( __ offset() - start, map); 2850 2851 __ maybe_isb(); 2852 2853 // r0 contains the address we are going to jump to assuming no exception got installed 2854 2855 // clear last_Java_sp 2856 __ reset_last_Java_frame(false, true); 2857 // check for pending exceptions 2858 Label pending; 2859 __ ldr(rscratch1, Address(rthread, Thread::pending_exception_offset())); 2860 __ cbnz(rscratch1, pending); 2861 2862 // get the returned Method* 2863 __ get_vm_result_2(rmethod, rthread); 2864 __ str(rmethod, Address(sp, RegisterSaver::reg_offset_in_bytes(rmethod))); 2865 2866 // r0 is where we want to jump, overwrite rscratch1 which is saved and scratch 2867 __ str(r0, Address(sp, RegisterSaver::rscratch1_offset_in_bytes())); 2868 RegisterSaver::restore_live_registers(masm); 2869 2870 // We are back the the original state on entry and ready to go. 2871 2872 __ br(rscratch1); 2873 2874 // Pending exception after the safepoint 2875 2876 __ bind(pending); 2877 2878 RegisterSaver::restore_live_registers(masm); 2879 2880 // exception pending => remove activation and forward to exception handler 2881 2882 __ str(zr, Address(rthread, JavaThread::vm_result_offset())); 2883 2884 __ ldr(r0, Address(rthread, Thread::pending_exception_offset())); 2885 __ far_jump(RuntimeAddress(StubRoutines::forward_exception_entry())); 2886 2887 // ------------- 2888 // make sure all code is generated 2889 masm->flush(); 2890 2891 // return the blob 2892 // frame_size_words or bytes?? 2893 return RuntimeStub::new_runtime_stub(name, &buffer, frame_complete, frame_size_in_words, oop_maps, true); 2894 } 2895 2896 2897 #ifdef COMPILER2 2898 // This is here instead of runtime_x86_64.cpp because it uses SimpleRuntimeFrame 2899 // 2900 //------------------------------generate_exception_blob--------------------------- 2901 // creates exception blob at the end 2902 // Using exception blob, this code is jumped from a compiled method. 2903 // (see emit_exception_handler in x86_64.ad file) 2904 // 2905 // Given an exception pc at a call we call into the runtime for the 2906 // handler in this method. This handler might merely restore state 2907 // (i.e. callee save registers) unwind the frame and jump to the 2908 // exception handler for the nmethod if there is no Java level handler 2909 // for the nmethod. 2910 // 2911 // This code is entered with a jmp. 2912 // 2913 // Arguments: 2914 // r0: exception oop 2915 // r3: exception pc 2916 // 2917 // Results: 2918 // r0: exception oop 2919 // r3: exception pc in caller or ??? 2920 // destination: exception handler of caller 2921 // 2922 // Note: the exception pc MUST be at a call (precise debug information) 2923 // Registers r0, r3, r2, r4, r5, r8-r11 are not callee saved. 2924 // 2925 2926 void OptoRuntime::generate_exception_blob() { 2927 assert(!OptoRuntime::is_callee_saved_register(R3_num), ""); 2928 assert(!OptoRuntime::is_callee_saved_register(R0_num), ""); 2929 assert(!OptoRuntime::is_callee_saved_register(R2_num), ""); 2930 2931 assert(SimpleRuntimeFrame::framesize % 4 == 0, "sp not 16-byte aligned"); 2932 2933 // Allocate space for the code 2934 ResourceMark rm; 2935 // Setup code generation tools 2936 CodeBuffer buffer("exception_blob", 2048, 1024); 2937 MacroAssembler* masm = new MacroAssembler(&buffer); 2938 2939 // TODO check various assumptions made here 2940 // 2941 // make sure we do so before running this 2942 2943 address start = __ pc(); 2944 2945 // push rfp and retaddr by hand 2946 // Exception pc is 'return address' for stack walker 2947 __ stp(rfp, lr, Address(__ pre(sp, -2 * wordSize))); 2948 // there are no callee save registers and we don't expect an 2949 // arg reg save area 2950 #ifndef PRODUCT 2951 assert(frame::arg_reg_save_area_bytes == 0, "not expecting frame reg save area"); 2952 #endif 2953 // Store exception in Thread object. We cannot pass any arguments to the 2954 // handle_exception call, since we do not want to make any assumption 2955 // about the size of the frame where the exception happened in. 2956 __ str(r0, Address(rthread, JavaThread::exception_oop_offset())); 2957 __ str(r3, Address(rthread, JavaThread::exception_pc_offset())); 2958 2959 // This call does all the hard work. It checks if an exception handler 2960 // exists in the method. 2961 // If so, it returns the handler address. 2962 // If not, it prepares for stack-unwinding, restoring the callee-save 2963 // registers of the frame being removed. 2964 // 2965 // address OptoRuntime::handle_exception_C(JavaThread* thread) 2966 // 2967 // n.b. 1 gp arg, 0 fp args, integral return type 2968 2969 // the stack should always be aligned 2970 address the_pc = __ pc(); 2971 __ set_last_Java_frame(sp, noreg, the_pc, rscratch1); 2972 __ mov(c_rarg0, rthread); 2973 __ lea(rscratch1, RuntimeAddress(CAST_FROM_FN_PTR(address, OptoRuntime::handle_exception_C))); 2974 __ blrt(rscratch1, 1, 0, MacroAssembler::ret_type_integral); 2975 __ maybe_isb(); 2976 2977 // Set an oopmap for the call site. This oopmap will only be used if we 2978 // are unwinding the stack. Hence, all locations will be dead. 2979 // Callee-saved registers will be the same as the frame above (i.e., 2980 // handle_exception_stub), since they were restored when we got the 2981 // exception. 2982 2983 OopMapSet* oop_maps = new OopMapSet(); 2984 2985 oop_maps->add_gc_map(the_pc - start, new OopMap(SimpleRuntimeFrame::framesize, 0)); 2986 2987 __ reset_last_Java_frame(false, true); 2988 2989 // Restore callee-saved registers 2990 2991 // rfp is an implicitly saved callee saved register (i.e. the calling 2992 // convention will save restore it in prolog/epilog) Other than that 2993 // there are no callee save registers now that adapter frames are gone. 2994 // and we dont' expect an arg reg save area 2995 __ ldp(rfp, r3, Address(__ post(sp, 2 * wordSize))); 2996 2997 // r0: exception handler 2998 2999 // We have a handler in r0 (could be deopt blob). 3000 __ mov(r8, r0); 3001 3002 // Get the exception oop 3003 __ ldr(r0, Address(rthread, JavaThread::exception_oop_offset())); 3004 // Get the exception pc in case we are deoptimized 3005 __ ldr(r4, Address(rthread, JavaThread::exception_pc_offset())); 3006 #ifdef ASSERT 3007 __ str(zr, Address(rthread, JavaThread::exception_handler_pc_offset())); 3008 __ str(zr, Address(rthread, JavaThread::exception_pc_offset())); 3009 #endif 3010 // Clear the exception oop so GC no longer processes it as a root. 3011 __ str(zr, Address(rthread, JavaThread::exception_oop_offset())); 3012 3013 // r0: exception oop 3014 // r8: exception handler 3015 // r4: exception pc 3016 // Jump to handler 3017 3018 __ br(r8); 3019 3020 // Make sure all code is generated 3021 masm->flush(); 3022 3023 // Set exception blob 3024 _exception_blob = ExceptionBlob::create(&buffer, oop_maps, SimpleRuntimeFrame::framesize >> 1); 3025 } 3026 #endif // COMPILER2