1 /* 2 * Copyright (c) 1998, 2012, Oracle and/or its affiliates. All rights reserved. 3 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. 4 * 5 * This code is free software; you can redistribute it and/or modify it 6 * under the terms of the GNU General Public License version 2 only, as 7 * published by the Free Software Foundation. 8 * 9 * This code is distributed in the hope that it will be useful, but WITHOUT 10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License 12 * version 2 for more details (a copy is included in the LICENSE file that 13 * accompanied this code). 14 * 15 * You should have received a copy of the GNU General Public License version 16 * 2 along with this work; if not, write to the Free Software Foundation, 17 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. 18 * 19 * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA 20 * or visit www.oracle.com if you need additional information or have any 21 * questions. 22 * 23 */ 24 25 #include "precompiled.hpp" 26 #include "asm/macroAssembler.hpp" 27 #include "code/relocInfo.hpp" 28 #include "nativeInst_x86.hpp" 29 #include "oops/oop.inline.hpp" 30 #include "runtime/safepoint.hpp" 31 32 33 void Relocation::pd_set_data_value(address x, intptr_t o, bool verify_only) { 34 #ifdef AMD64 35 x += o; 36 typedef Assembler::WhichOperand WhichOperand; 37 WhichOperand which = (WhichOperand) format(); // that is, disp32 or imm, call32, narrow oop 38 assert(which == Assembler::disp32_operand || 39 which == Assembler::narrow_oop_operand || 40 which == Assembler::imm_operand, "format unpacks ok"); 41 if (which == Assembler::imm_operand) { 42 if (verify_only) { 43 assert(*pd_address_in_code() == x, "instructions must match"); 44 } else { 45 *pd_address_in_code() = x; 46 } 47 } else if (which == Assembler::narrow_oop_operand) { 48 address disp = Assembler::locate_operand(addr(), which); 49 // both compressed oops and compressed classes look the same 50 if (Universe::heap()->is_in_reserved((oop)x)) { 51 if (verify_only) { 52 assert(*(uint32_t*) disp == oopDesc::encode_heap_oop((oop)x), "instructions must match"); 53 } else { 54 *(int32_t*) disp = oopDesc::encode_heap_oop((oop)x); 55 } 56 } else { 57 if (verify_only) { 58 assert(*(uint32_t*) disp == oopDesc::encode_klass((Klass*)x), "instructions must match"); 59 } else { 60 *(int32_t*) disp = oopDesc::encode_klass((Klass*)x); 61 } 62 } 63 } else { 64 // Note: Use runtime_call_type relocations for call32_operand. 65 address ip = addr(); 66 address disp = Assembler::locate_operand(ip, which); 67 address next_ip = Assembler::locate_next_instruction(ip); 68 if (verify_only) { 69 assert(*(int32_t*) disp == (x - next_ip), "instructions must match"); 70 } else { 71 *(int32_t*) disp = x - next_ip; 72 } 73 } 74 #else 75 if (verify_only) { 76 assert(*pd_address_in_code() == (x + o), "instructions must match"); 77 } else { 78 *pd_address_in_code() = x + o; 79 } 80 #endif // AMD64 81 } 82 83 84 address Relocation::pd_call_destination(address orig_addr) { 85 intptr_t adj = 0; 86 if (orig_addr != NULL) { 87 // We just moved this call instruction from orig_addr to addr(). 88 // This means its target will appear to have grown by addr() - orig_addr. 89 adj = -( addr() - orig_addr ); 90 } 91 NativeInstruction* ni = nativeInstruction_at(addr()); 92 if (ni->is_call()) { 93 return nativeCall_at(addr())->destination() + adj; 94 } else if (ni->is_jump()) { 95 return nativeJump_at(addr())->jump_destination() + adj; 96 } else if (ni->is_cond_jump()) { 97 return nativeGeneralJump_at(addr())->jump_destination() + adj; 98 } else if (ni->is_mov_literal64()) { 99 return (address) ((NativeMovConstReg*)ni)->data(); 100 } else { 101 ShouldNotReachHere(); 102 return NULL; 103 } 104 } 105 106 107 void Relocation::pd_set_call_destination(address x) { 108 NativeInstruction* ni = nativeInstruction_at(addr()); 109 if (ni->is_call()) { 110 nativeCall_at(addr())->set_destination(x); 111 } else if (ni->is_jump()) { 112 NativeJump* nj = nativeJump_at(addr()); 113 114 // Unresolved jumps are recognized by a destination of -1 115 // However 64bit can't actually produce such an address 116 // and encodes a jump to self but jump_destination will 117 // return a -1 as the signal. We must not relocate this 118 // jmp or the ic code will not see it as unresolved. 119 120 if (nj->jump_destination() == (address) -1) { 121 x = addr(); // jump to self 122 } 123 nj->set_jump_destination(x); 124 } else if (ni->is_cond_jump()) { 125 // %%%% kludge this, for now, until we get a jump_destination method 126 address old_dest = nativeGeneralJump_at(addr())->jump_destination(); 127 address disp = Assembler::locate_operand(addr(), Assembler::call32_operand); 128 *(jint*)disp += (x - old_dest); 129 } else if (ni->is_mov_literal64()) { 130 ((NativeMovConstReg*)ni)->set_data((intptr_t)x); 131 } else { 132 ShouldNotReachHere(); 133 } 134 } 135 136 137 address* Relocation::pd_address_in_code() { 138 // All embedded Intel addresses are stored in 32-bit words. 139 // Since the addr points at the start of the instruction, 140 // we must parse the instruction a bit to find the embedded word. 141 assert(is_data(), "must be a DataRelocation"); 142 typedef Assembler::WhichOperand WhichOperand; 143 WhichOperand which = (WhichOperand) format(); // that is, disp32 or imm/imm32 144 #ifdef AMD64 145 assert(which == Assembler::disp32_operand || 146 which == Assembler::call32_operand || 147 which == Assembler::imm_operand, "format unpacks ok"); 148 // The "address" in the code is a displacement can't return it as 149 // and address* since it is really a jint* 150 guarantee(which == Assembler::imm_operand, "must be immediate operand"); 151 #else 152 assert(which == Assembler::disp32_operand || which == Assembler::imm_operand, "format unpacks ok"); 153 #endif // AMD64 154 return (address*) Assembler::locate_operand(addr(), which); 155 } 156 157 158 address Relocation::pd_get_address_from_code() { 159 #ifdef AMD64 160 // All embedded Intel addresses are stored in 32-bit words. 161 // Since the addr points at the start of the instruction, 162 // we must parse the instruction a bit to find the embedded word. 163 assert(is_data(), "must be a DataRelocation"); 164 typedef Assembler::WhichOperand WhichOperand; 165 WhichOperand which = (WhichOperand) format(); // that is, disp32 or imm/imm32 166 assert(which == Assembler::disp32_operand || 167 which == Assembler::call32_operand || 168 which == Assembler::imm_operand, "format unpacks ok"); 169 if (which != Assembler::imm_operand) { 170 address ip = addr(); 171 address disp = Assembler::locate_operand(ip, which); 172 address next_ip = Assembler::locate_next_instruction(ip); 173 address a = next_ip + *(int32_t*) disp; 174 return a; 175 } 176 #endif // AMD64 177 return *pd_address_in_code(); 178 } 179 180 void poll_Relocation::fix_relocation_after_move(const CodeBuffer* src, CodeBuffer* dest) { 181 #ifdef _LP64 182 if (!Assembler::is_polling_page_far()) { 183 typedef Assembler::WhichOperand WhichOperand; 184 WhichOperand which = (WhichOperand) format(); 185 // This format is imm but it is really disp32 186 which = Assembler::disp32_operand; 187 address orig_addr = old_addr_for(addr(), src, dest); 188 NativeInstruction* oni = nativeInstruction_at(orig_addr); 189 int32_t* orig_disp = (int32_t*) Assembler::locate_operand(orig_addr, which); 190 // This poll_addr is incorrect by the size of the instruction it is irrelevant 191 intptr_t poll_addr = (intptr_t)oni + *orig_disp; 192 193 NativeInstruction* ni = nativeInstruction_at(addr()); 194 intptr_t new_disp = poll_addr - (intptr_t) ni; 195 196 int32_t* disp = (int32_t*) Assembler::locate_operand(addr(), which); 197 * disp = (int32_t)new_disp; 198 } 199 #endif // _LP64 200 } 201 202 void poll_return_Relocation::fix_relocation_after_move(const CodeBuffer* src, CodeBuffer* dest) { 203 #ifdef _LP64 204 if (!Assembler::is_polling_page_far()) { 205 typedef Assembler::WhichOperand WhichOperand; 206 WhichOperand which = (WhichOperand) format(); 207 // This format is imm but it is really disp32 208 which = Assembler::disp32_operand; 209 address orig_addr = old_addr_for(addr(), src, dest); 210 NativeInstruction* oni = nativeInstruction_at(orig_addr); 211 int32_t* orig_disp = (int32_t*) Assembler::locate_operand(orig_addr, which); 212 // This poll_addr is incorrect by the size of the instruction it is irrelevant 213 intptr_t poll_addr = (intptr_t)oni + *orig_disp; 214 215 NativeInstruction* ni = nativeInstruction_at(addr()); 216 intptr_t new_disp = poll_addr - (intptr_t) ni; 217 218 int32_t* disp = (int32_t*) Assembler::locate_operand(addr(), which); 219 * disp = (int32_t)new_disp; 220 } 221 #endif // _LP64 222 } 223 224 void metadata_Relocation::pd_fix_value(address x) { 225 }