/* * Copyright (c) 2007, 2016, Oracle and/or its affiliates. All rights reserved. * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. * * This code is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License version 2 only, as * published by the Free Software Foundation. * * This code is distributed in the hope that it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License * version 2 for more details (a copy is included in the LICENSE file that * accompanied this code). * * You should have received a copy of the GNU General Public License version * 2 along with this work; if not, write to the Free Software Foundation, * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. * * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA * or visit www.oracle.com if you need additional information or have any * questions. */ /* @test @key headful @bug 6500477 @summary Tests whether DynamicLayout is really off @author anthony.petrov@...: area=awt.toplevel @library ../../regtesthelpers @build Util @run main DynamicLayout */ /** * DynamicLayout.java * * summary: tests whether DynamicLayout is really off */ import java.awt.*; import java.awt.event.*; import javax.swing.*; import java.util.*; import test.java.awt.regtesthelpers.Util; public class DynamicLayout { //*** test-writer defined static variables go here *** private static void init() { //*** Create instructions for the user here *** String[] instructions = { "This is an AUTOMATIC test, simply wait until it is done.", "The result (passed or failed) will be shown in the", "message window below." }; Sysout.createDialog( ); Sysout.printInstructions( instructions ); // Turn off the dynamic layouting Toolkit.getDefaultToolkit().setDynamicLayout(false); System.out.println("isDynamicLayoutActive(): " + Toolkit.getDefaultToolkit().isDynamicLayoutActive()); final Frame frame = new Frame("Test Frame"); // Add some components to check their position later JPanel panel = new JPanel(); panel.setBackground(Color.RED); JTextField jf = new JTextField (10); JTextField jf1 = new JTextField (10); JButton jb = new JButton("Test"); panel.add(jf); panel.add(jf1); panel.add(jb); frame.add(panel); frame.setSize(400, 400); frame.setVisible(true); Robot robot = Util.createRobot(); robot.setAutoDelay(20); // To be sure the window is shown and packed Util.waitForIdle(robot); // The initial JTextField position. While resizing the position supposed to stay the same. Point loc1 = jf1.getLocation(); System.out.println("The initial position of the JTextField is: " + loc1); Insets insets = frame.getInsets(); if (insets.right == 0 || insets.bottom == 0) { System.out.println("The test environment must have non-zero right & bottom insets! The current insets are: " + insets); pass(); return; } // Let's move the mouse pointer to the bottom-right coner of the frame (the "size-grip") Rectangle bounds = frame.getBounds(); robot.mouseMove(bounds.x + bounds.width - 1, bounds.y + bounds.height - 1); // ... and start resizing robot.mousePress( InputEvent.BUTTON1_MASK ); robot.mouseMove(bounds.x + bounds.width + 20, bounds.y + bounds.height + 15); Util.waitForIdle(robot); // And check whether the location of the JTextField has changed. Point loc2 = jf1.getLocation(); System.out.println("Position of the JTextField while resizing is: " + loc2); robot.mouseRelease( InputEvent.BUTTON1_MASK ); // Location of the component changed if relayouting has happened. if (!loc2.equals(loc1)) { fail("Location of a component has been changed."); return; } DynamicLayout.pass(); }//End init() /***************************************************** * Standard Test Machinery Section * DO NOT modify anything in this section -- it's a * standard chunk of code which has all of the * synchronisation necessary for the test harness. * By keeping it the same in all tests, it is easier * to read and understand someone else's test, as * well as insuring that all tests behave correctly * with the test harness. * There is a section following this for test- * classes ******************************************************/ private static boolean theTestPassed = false; private static boolean testGeneratedInterrupt = false; private static String failureMessage = ""; private static Thread mainThread = null; private static int sleepTime = 300000; // Not sure about what happens if multiple of this test are // instantiated in the same VM. Being static (and using // static vars), it aint gonna work. Not worrying about // it for now. public static void main( String args[] ) throws InterruptedException { mainThread = Thread.currentThread(); try { init(); } catch( TestPassedException e ) { //The test passed, so just return from main and harness will // interepret this return as a pass return; } //At this point, neither test pass nor test fail has been // called -- either would have thrown an exception and ended the // test, so we know we have multiple threads. //Test involves other threads, so sleep and wait for them to // called pass() or fail() try { Thread.sleep( sleepTime ); //Timed out, so fail the test throw new RuntimeException( "Timed out after " + sleepTime/1000 + " seconds" ); } catch (InterruptedException e) { //The test harness may have interrupted the test. If so, rethrow the exception // so that the harness gets it and deals with it. if( ! testGeneratedInterrupt ) throw e; //reset flag in case hit this code more than once for some reason (just safety) testGeneratedInterrupt = false; if ( theTestPassed == false ) { throw new RuntimeException( failureMessage ); } } }//main public static synchronized void setTimeoutTo( int seconds ) { sleepTime = seconds * 1000; } public static synchronized void pass() { Sysout.println( "The test passed." ); Sysout.println( "The test is over, hit Ctl-C to stop Java VM" ); //first check if this is executing in main thread if ( mainThread == Thread.currentThread() ) { //Still in the main thread, so set the flag just for kicks, // and throw a test passed exception which will be caught // and end the test. theTestPassed = true; throw new TestPassedException(); } theTestPassed = true; testGeneratedInterrupt = true; mainThread.interrupt(); }//pass() public static synchronized void fail() { //test writer didn't specify why test failed, so give generic fail( "it just plain failed! :-)" ); } public static synchronized void fail( String whyFailed ) { Sysout.println( "The test failed: " + whyFailed ); Sysout.println( "The test is over, hit Ctl-C to stop Java VM" ); //check if this called from main thread if ( mainThread == Thread.currentThread() ) { //If main thread, fail now 'cause not sleeping throw new RuntimeException( whyFailed ); } theTestPassed = false; testGeneratedInterrupt = true; failureMessage = whyFailed; mainThread.interrupt(); }//fail() }// class DynamicLayout //This exception is used to exit from any level of call nesting // when it's determined that the test has passed, and immediately // end the test. class TestPassedException extends RuntimeException { } //*********** End Standard Test Machinery Section ********** //************ Begin classes defined for the test **************** // if want to make listeners, here is the recommended place for them, then instantiate // them in init() /* Example of a class which may be written as part of a test class NewClass implements anInterface { static int newVar = 0; public void eventDispatched(AWTEvent e) { //Counting events to see if we get enough eventCount++; if( eventCount == 20 ) { //got enough events, so pass DynamicLayout.pass(); } else if( tries == 20 ) { //tried too many times without getting enough events so fail DynamicLayout.fail(); } }// eventDispatched() }// NewClass class */ //************** End classes defined for the test ******************* /**************************************************** Standard Test Machinery DO NOT modify anything below -- it's a standard chunk of code whose purpose is to make user interaction uniform, and thereby make it simpler to read and understand someone else's test. ****************************************************/ /** This is part of the standard test machinery. It creates a dialog (with the instructions), and is the interface for sending text messages to the user. To print the instructions, send an array of strings to Sysout.createDialog WithInstructions method. Put one line of instructions per array entry. To display a message for the tester to see, simply call Sysout.println with the string to be displayed. This mimics System.out.println but works within the test harness as well as standalone. */ class Sysout { private static TestDialog dialog; public static void createDialogWithInstructions( String[] instructions ) { dialog = new TestDialog( new Frame(), "Instructions" ); dialog.printInstructions( instructions ); dialog.setVisible(true); println( "Any messages for the tester will display here." ); } public static void createDialog( ) { dialog = new TestDialog( new Frame(), "Instructions" ); String[] defInstr = { "Instructions will appear here. ", "" } ; dialog.printInstructions( defInstr ); dialog.setVisible(true); println( "Any messages for the tester will display here." ); } public static void printInstructions( String[] instructions ) { dialog.printInstructions( instructions ); } public static void println( String messageIn ) { dialog.displayMessage( messageIn ); System.out.println(messageIn); } }// Sysout class /** This is part of the standard test machinery. It provides a place for the test instructions to be displayed, and a place for interactive messages to the user to be displayed. To have the test instructions displayed, see Sysout. To have a message to the user be displayed, see Sysout. Do not call anything in this dialog directly. */ class TestDialog extends Dialog { TextArea instructionsText; TextArea messageText; int maxStringLength = 80; //DO NOT call this directly, go through Sysout public TestDialog( Frame frame, String name ) { super( frame, name ); int scrollBoth = TextArea.SCROLLBARS_BOTH; instructionsText = new TextArea( "", 15, maxStringLength, scrollBoth ); add( "North", instructionsText ); messageText = new TextArea( "", 5, maxStringLength, scrollBoth ); add("Center", messageText); pack(); setVisible(true); }// TestDialog() //DO NOT call this directly, go through Sysout public void printInstructions( String[] instructions ) { //Clear out any current instructions instructionsText.setText( "" ); //Go down array of instruction strings String printStr, remainingStr; for( int i=0; i < instructions.length; i++ ) { //chop up each into pieces maxSringLength long remainingStr = instructions[ i ]; while( remainingStr.length() > 0 ) { //if longer than max then chop off first max chars to print if( remainingStr.length() >= maxStringLength ) { //Try to chop on a word boundary int posOfSpace = remainingStr. lastIndexOf( ' ', maxStringLength - 1 ); if( posOfSpace <= 0 ) posOfSpace = maxStringLength - 1; printStr = remainingStr.substring( 0, posOfSpace + 1 ); remainingStr = remainingStr.substring( posOfSpace + 1 ); } //else just print else { printStr = remainingStr; remainingStr = ""; } instructionsText.append( printStr + "\n" ); }// while }// for }//printInstructions() //DO NOT call this directly, go through Sysout public void displayMessage( String messageIn ) { messageText.append( messageIn + "\n" ); System.out.println(messageIn); } }// TestDialog class