1 /* 2 * Copyright (c) 2014, 2016, Oracle and/or its affiliates. All rights reserved. 3 * Copyright (c) 2015, 2016 SAP SE. All rights reserved. 4 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. 5 * 6 * This code is free software; you can redistribute it and/or modify it 7 * under the terms of the GNU General Public License version 2 only, as 8 * published by the Free Software Foundation. 9 * 10 * This code is distributed in the hope that it will be useful, but WITHOUT 11 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 12 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License 13 * version 2 for more details (a copy is included in the LICENSE file that 14 * accompanied this code). 15 * 16 * You should have received a copy of the GNU General Public License version 17 * 2 along with this work; if not, write to the Free Software Foundation, 18 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. 19 * 20 * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA 21 * or visit www.oracle.com if you need additional information or have any 22 * questions. 23 * 24 */ 25 26 #include "precompiled.hpp" 27 #include "asm/macroAssembler.inline.hpp" 28 #include "interpreter/bytecodeHistogram.hpp" 29 #include "interpreter/interpreter.hpp" 30 #include "interpreter/interpreterRuntime.hpp" 31 #include "interpreter/interp_masm.hpp" 32 #include "interpreter/templateInterpreterGenerator.hpp" 33 #include "interpreter/templateTable.hpp" 34 #include "oops/arrayOop.hpp" 35 #include "oops/methodData.hpp" 36 #include "oops/method.hpp" 37 #include "oops/oop.inline.hpp" 38 #include "prims/jvmtiExport.hpp" 39 #include "prims/jvmtiThreadState.hpp" 40 #include "runtime/arguments.hpp" 41 #include "runtime/deoptimization.hpp" 42 #include "runtime/frame.inline.hpp" 43 #include "runtime/sharedRuntime.hpp" 44 #include "runtime/stubRoutines.hpp" 45 #include "runtime/synchronizer.hpp" 46 #include "runtime/timer.hpp" 47 #include "runtime/vframeArray.hpp" 48 #include "utilities/debug.hpp" 49 #include "utilities/macros.hpp" 50 51 #undef __ 52 #define __ _masm-> 53 54 // Size of interpreter code. Increase if too small. Interpreter will 55 // fail with a guarantee ("not enough space for interpreter generation"); 56 // if too small. 57 // Run with +PrintInterpreter to get the VM to print out the size. 58 // Max size with JVMTI 59 int TemplateInterpreter::InterpreterCodeSize = 230*K; 60 61 #ifdef PRODUCT 62 #define BLOCK_COMMENT(str) /* nothing */ 63 #else 64 #define BLOCK_COMMENT(str) __ block_comment(str) 65 #endif 66 67 #define BIND(label) __ bind(label); BLOCK_COMMENT(#label ":") 68 69 //----------------------------------------------------------------------------- 70 71 address TemplateInterpreterGenerator::generate_slow_signature_handler() { 72 // Slow_signature handler that respects the PPC C calling conventions. 73 // 74 // We get called by the native entry code with our output register 75 // area == 8. First we call InterpreterRuntime::get_result_handler 76 // to copy the pointer to the signature string temporarily to the 77 // first C-argument and to return the result_handler in 78 // R3_RET. Since native_entry will copy the jni-pointer to the 79 // first C-argument slot later on, it is OK to occupy this slot 80 // temporarilly. Then we copy the argument list on the java 81 // expression stack into native varargs format on the native stack 82 // and load arguments into argument registers. Integer arguments in 83 // the varargs vector will be sign-extended to 8 bytes. 84 // 85 // On entry: 86 // R3_ARG1 - intptr_t* Address of java argument list in memory. 87 // R15_prev_state - BytecodeInterpreter* Address of interpreter state for 88 // this method 89 // R19_method 90 // 91 // On exit (just before return instruction): 92 // R3_RET - contains the address of the result_handler. 93 // R4_ARG2 - is not updated for static methods and contains "this" otherwise. 94 // R5_ARG3-R10_ARG8: - When the (i-2)th Java argument is not of type float or double, 95 // ARGi contains this argument. Otherwise, ARGi is not updated. 96 // F1_ARG1-F13_ARG13 - contain the first 13 arguments of type float or double. 97 98 const int LogSizeOfTwoInstructions = 3; 99 100 // FIXME: use Argument:: GL: Argument names different numbers! 101 const int max_fp_register_arguments = 13; 102 const int max_int_register_arguments = 6; // first 2 are reserved 103 104 const Register arg_java = R21_tmp1; 105 const Register arg_c = R22_tmp2; 106 const Register signature = R23_tmp3; // is string 107 const Register sig_byte = R24_tmp4; 108 const Register fpcnt = R25_tmp5; 109 const Register argcnt = R26_tmp6; 110 const Register intSlot = R27_tmp7; 111 const Register target_sp = R28_tmp8; 112 const FloatRegister floatSlot = F0; 113 114 address entry = __ function_entry(); 115 116 __ save_LR_CR(R0); 117 __ save_nonvolatile_gprs(R1_SP, _spill_nonvolatiles_neg(r14)); 118 // We use target_sp for storing arguments in the C frame. 119 __ mr(target_sp, R1_SP); 120 __ push_frame_reg_args_nonvolatiles(0, R11_scratch1); 121 122 __ mr(arg_java, R3_ARG1); 123 124 __ call_VM_leaf(CAST_FROM_FN_PTR(address, InterpreterRuntime::get_signature), R16_thread, R19_method); 125 126 // Signature is in R3_RET. Signature is callee saved. 127 __ mr(signature, R3_RET); 128 129 // Get the result handler. 130 __ call_VM_leaf(CAST_FROM_FN_PTR(address, InterpreterRuntime::get_result_handler), R16_thread, R19_method); 131 132 { 133 Label L; 134 // test if static 135 // _access_flags._flags must be at offset 0. 136 // TODO PPC port: requires change in shared code. 137 //assert(in_bytes(AccessFlags::flags_offset()) == 0, 138 // "MethodDesc._access_flags == MethodDesc._access_flags._flags"); 139 // _access_flags must be a 32 bit value. 140 assert(sizeof(AccessFlags) == 4, "wrong size"); 141 __ lwa(R11_scratch1/*access_flags*/, method_(access_flags)); 142 // testbit with condition register. 143 __ testbitdi(CCR0, R0, R11_scratch1/*access_flags*/, JVM_ACC_STATIC_BIT); 144 __ btrue(CCR0, L); 145 // For non-static functions, pass "this" in R4_ARG2 and copy it 146 // to 2nd C-arg slot. 147 // We need to box the Java object here, so we use arg_java 148 // (address of current Java stack slot) as argument and don't 149 // dereference it as in case of ints, floats, etc. 150 __ mr(R4_ARG2, arg_java); 151 __ addi(arg_java, arg_java, -BytesPerWord); 152 __ std(R4_ARG2, _abi(carg_2), target_sp); 153 __ bind(L); 154 } 155 156 // Will be incremented directly after loop_start. argcnt=0 157 // corresponds to 3rd C argument. 158 __ li(argcnt, -1); 159 // arg_c points to 3rd C argument 160 __ addi(arg_c, target_sp, _abi(carg_3)); 161 // no floating-point args parsed so far 162 __ li(fpcnt, 0); 163 164 Label move_intSlot_to_ARG, move_floatSlot_to_FARG; 165 Label loop_start, loop_end; 166 Label do_int, do_long, do_float, do_double, do_dontreachhere, do_object, do_array, do_boxed; 167 168 // signature points to '(' at entry 169 #ifdef ASSERT 170 __ lbz(sig_byte, 0, signature); 171 __ cmplwi(CCR0, sig_byte, '('); 172 __ bne(CCR0, do_dontreachhere); 173 #endif 174 175 __ bind(loop_start); 176 177 __ addi(argcnt, argcnt, 1); 178 __ lbzu(sig_byte, 1, signature); 179 180 __ cmplwi(CCR0, sig_byte, ')'); // end of signature 181 __ beq(CCR0, loop_end); 182 183 __ cmplwi(CCR0, sig_byte, 'B'); // byte 184 __ beq(CCR0, do_int); 185 186 __ cmplwi(CCR0, sig_byte, 'C'); // char 187 __ beq(CCR0, do_int); 188 189 __ cmplwi(CCR0, sig_byte, 'D'); // double 190 __ beq(CCR0, do_double); 191 192 __ cmplwi(CCR0, sig_byte, 'F'); // float 193 __ beq(CCR0, do_float); 194 195 __ cmplwi(CCR0, sig_byte, 'I'); // int 196 __ beq(CCR0, do_int); 197 198 __ cmplwi(CCR0, sig_byte, 'J'); // long 199 __ beq(CCR0, do_long); 200 201 __ cmplwi(CCR0, sig_byte, 'S'); // short 202 __ beq(CCR0, do_int); 203 204 __ cmplwi(CCR0, sig_byte, 'Z'); // boolean 205 __ beq(CCR0, do_int); 206 207 __ cmplwi(CCR0, sig_byte, 'L'); // object 208 __ beq(CCR0, do_object); 209 210 __ cmplwi(CCR0, sig_byte, '['); // array 211 __ beq(CCR0, do_array); 212 213 // __ cmplwi(CCR0, sig_byte, 'V'); // void cannot appear since we do not parse the return type 214 // __ beq(CCR0, do_void); 215 216 __ bind(do_dontreachhere); 217 218 __ unimplemented("ShouldNotReachHere in slow_signature_handler", 120); 219 220 __ bind(do_array); 221 222 { 223 Label start_skip, end_skip; 224 225 __ bind(start_skip); 226 __ lbzu(sig_byte, 1, signature); 227 __ cmplwi(CCR0, sig_byte, '['); 228 __ beq(CCR0, start_skip); // skip further brackets 229 __ cmplwi(CCR0, sig_byte, '9'); 230 __ bgt(CCR0, end_skip); // no optional size 231 __ cmplwi(CCR0, sig_byte, '0'); 232 __ bge(CCR0, start_skip); // skip optional size 233 __ bind(end_skip); 234 235 __ cmplwi(CCR0, sig_byte, 'L'); 236 __ beq(CCR0, do_object); // for arrays of objects, the name of the object must be skipped 237 __ b(do_boxed); // otherwise, go directly to do_boxed 238 } 239 240 __ bind(do_object); 241 { 242 Label L; 243 __ bind(L); 244 __ lbzu(sig_byte, 1, signature); 245 __ cmplwi(CCR0, sig_byte, ';'); 246 __ bne(CCR0, L); 247 } 248 // Need to box the Java object here, so we use arg_java (address of 249 // current Java stack slot) as argument and don't dereference it as 250 // in case of ints, floats, etc. 251 Label do_null; 252 __ bind(do_boxed); 253 __ ld(R0,0, arg_java); 254 __ cmpdi(CCR0, R0, 0); 255 __ li(intSlot,0); 256 __ beq(CCR0, do_null); 257 __ mr(intSlot, arg_java); 258 __ bind(do_null); 259 __ std(intSlot, 0, arg_c); 260 __ addi(arg_java, arg_java, -BytesPerWord); 261 __ addi(arg_c, arg_c, BytesPerWord); 262 __ cmplwi(CCR0, argcnt, max_int_register_arguments); 263 __ blt(CCR0, move_intSlot_to_ARG); 264 __ b(loop_start); 265 266 __ bind(do_int); 267 __ lwa(intSlot, 0, arg_java); 268 __ std(intSlot, 0, arg_c); 269 __ addi(arg_java, arg_java, -BytesPerWord); 270 __ addi(arg_c, arg_c, BytesPerWord); 271 __ cmplwi(CCR0, argcnt, max_int_register_arguments); 272 __ blt(CCR0, move_intSlot_to_ARG); 273 __ b(loop_start); 274 275 __ bind(do_long); 276 __ ld(intSlot, -BytesPerWord, arg_java); 277 __ std(intSlot, 0, arg_c); 278 __ addi(arg_java, arg_java, - 2 * BytesPerWord); 279 __ addi(arg_c, arg_c, BytesPerWord); 280 __ cmplwi(CCR0, argcnt, max_int_register_arguments); 281 __ blt(CCR0, move_intSlot_to_ARG); 282 __ b(loop_start); 283 284 __ bind(do_float); 285 __ lfs(floatSlot, 0, arg_java); 286 #if defined(LINUX) 287 // Linux uses ELF ABI. Both original ELF and ELFv2 ABIs have float 288 // in the least significant word of an argument slot. 289 #if defined(VM_LITTLE_ENDIAN) 290 __ stfs(floatSlot, 0, arg_c); 291 #else 292 __ stfs(floatSlot, 4, arg_c); 293 #endif 294 #elif defined(AIX) 295 // Although AIX runs on big endian CPU, float is in most significant 296 // word of an argument slot. 297 __ stfs(floatSlot, 0, arg_c); 298 #else 299 #error "unknown OS" 300 #endif 301 __ addi(arg_java, arg_java, -BytesPerWord); 302 __ addi(arg_c, arg_c, BytesPerWord); 303 __ cmplwi(CCR0, fpcnt, max_fp_register_arguments); 304 __ blt(CCR0, move_floatSlot_to_FARG); 305 __ b(loop_start); 306 307 __ bind(do_double); 308 __ lfd(floatSlot, - BytesPerWord, arg_java); 309 __ stfd(floatSlot, 0, arg_c); 310 __ addi(arg_java, arg_java, - 2 * BytesPerWord); 311 __ addi(arg_c, arg_c, BytesPerWord); 312 __ cmplwi(CCR0, fpcnt, max_fp_register_arguments); 313 __ blt(CCR0, move_floatSlot_to_FARG); 314 __ b(loop_start); 315 316 __ bind(loop_end); 317 318 __ pop_frame(); 319 __ restore_nonvolatile_gprs(R1_SP, _spill_nonvolatiles_neg(r14)); 320 __ restore_LR_CR(R0); 321 322 __ blr(); 323 324 Label move_int_arg, move_float_arg; 325 __ bind(move_int_arg); // each case must consist of 2 instructions (otherwise adapt LogSizeOfTwoInstructions) 326 __ mr(R5_ARG3, intSlot); __ b(loop_start); 327 __ mr(R6_ARG4, intSlot); __ b(loop_start); 328 __ mr(R7_ARG5, intSlot); __ b(loop_start); 329 __ mr(R8_ARG6, intSlot); __ b(loop_start); 330 __ mr(R9_ARG7, intSlot); __ b(loop_start); 331 __ mr(R10_ARG8, intSlot); __ b(loop_start); 332 333 __ bind(move_float_arg); // each case must consist of 2 instructions (otherwise adapt LogSizeOfTwoInstructions) 334 __ fmr(F1_ARG1, floatSlot); __ b(loop_start); 335 __ fmr(F2_ARG2, floatSlot); __ b(loop_start); 336 __ fmr(F3_ARG3, floatSlot); __ b(loop_start); 337 __ fmr(F4_ARG4, floatSlot); __ b(loop_start); 338 __ fmr(F5_ARG5, floatSlot); __ b(loop_start); 339 __ fmr(F6_ARG6, floatSlot); __ b(loop_start); 340 __ fmr(F7_ARG7, floatSlot); __ b(loop_start); 341 __ fmr(F8_ARG8, floatSlot); __ b(loop_start); 342 __ fmr(F9_ARG9, floatSlot); __ b(loop_start); 343 __ fmr(F10_ARG10, floatSlot); __ b(loop_start); 344 __ fmr(F11_ARG11, floatSlot); __ b(loop_start); 345 __ fmr(F12_ARG12, floatSlot); __ b(loop_start); 346 __ fmr(F13_ARG13, floatSlot); __ b(loop_start); 347 348 __ bind(move_intSlot_to_ARG); 349 __ sldi(R0, argcnt, LogSizeOfTwoInstructions); 350 __ load_const(R11_scratch1, move_int_arg); // Label must be bound here. 351 __ add(R11_scratch1, R0, R11_scratch1); 352 __ mtctr(R11_scratch1/*branch_target*/); 353 __ bctr(); 354 __ bind(move_floatSlot_to_FARG); 355 __ sldi(R0, fpcnt, LogSizeOfTwoInstructions); 356 __ addi(fpcnt, fpcnt, 1); 357 __ load_const(R11_scratch1, move_float_arg); // Label must be bound here. 358 __ add(R11_scratch1, R0, R11_scratch1); 359 __ mtctr(R11_scratch1/*branch_target*/); 360 __ bctr(); 361 362 return entry; 363 } 364 365 address TemplateInterpreterGenerator::generate_result_handler_for(BasicType type) { 366 // 367 // Registers alive 368 // R3_RET 369 // LR 370 // 371 // Registers updated 372 // R3_RET 373 // 374 375 Label done; 376 address entry = __ pc(); 377 378 switch (type) { 379 case T_BOOLEAN: 380 // convert !=0 to 1 381 __ neg(R0, R3_RET); 382 __ orr(R0, R3_RET, R0); 383 __ srwi(R3_RET, R0, 31); 384 break; 385 case T_BYTE: 386 // sign extend 8 bits 387 __ extsb(R3_RET, R3_RET); 388 break; 389 case T_CHAR: 390 // zero extend 16 bits 391 __ clrldi(R3_RET, R3_RET, 48); 392 break; 393 case T_SHORT: 394 // sign extend 16 bits 395 __ extsh(R3_RET, R3_RET); 396 break; 397 case T_INT: 398 // sign extend 32 bits 399 __ extsw(R3_RET, R3_RET); 400 break; 401 case T_LONG: 402 break; 403 case T_OBJECT: 404 // unbox result if not null 405 __ cmpdi(CCR0, R3_RET, 0); 406 __ beq(CCR0, done); 407 __ ld(R3_RET, 0, R3_RET); 408 __ verify_oop(R3_RET); 409 break; 410 case T_FLOAT: 411 break; 412 case T_DOUBLE: 413 break; 414 case T_VOID: 415 break; 416 default: ShouldNotReachHere(); 417 } 418 419 BIND(done); 420 __ blr(); 421 422 return entry; 423 } 424 425 // Abstract method entry. 426 // 427 address TemplateInterpreterGenerator::generate_abstract_entry(void) { 428 address entry = __ pc(); 429 430 // 431 // Registers alive 432 // R16_thread - JavaThread* 433 // R19_method - callee's method (method to be invoked) 434 // R1_SP - SP prepared such that caller's outgoing args are near top 435 // LR - return address to caller 436 // 437 // Stack layout at this point: 438 // 439 // 0 [TOP_IJAVA_FRAME_ABI] <-- R1_SP 440 // alignment (optional) 441 // [outgoing Java arguments] 442 // ... 443 // PARENT [PARENT_IJAVA_FRAME_ABI] 444 // ... 445 // 446 447 // Can't use call_VM here because we have not set up a new 448 // interpreter state. Make the call to the vm and make it look like 449 // our caller set up the JavaFrameAnchor. 450 __ set_top_ijava_frame_at_SP_as_last_Java_frame(R1_SP, R12_scratch2/*tmp*/); 451 452 // Push a new C frame and save LR. 453 __ save_LR_CR(R0); 454 __ push_frame_reg_args(0, R11_scratch1); 455 456 // This is not a leaf but we have a JavaFrameAnchor now and we will 457 // check (create) exceptions afterward so this is ok. 458 __ call_VM_leaf(CAST_FROM_FN_PTR(address, InterpreterRuntime::throw_AbstractMethodError), 459 R16_thread); 460 461 // Pop the C frame and restore LR. 462 __ pop_frame(); 463 __ restore_LR_CR(R0); 464 465 // Reset JavaFrameAnchor from call_VM_leaf above. 466 __ reset_last_Java_frame(); 467 468 // We don't know our caller, so jump to the general forward exception stub, 469 // which will also pop our full frame off. Satisfy the interface of 470 // SharedRuntime::generate_forward_exception() 471 __ load_const_optimized(R11_scratch1, StubRoutines::forward_exception_entry(), R0); 472 __ mtctr(R11_scratch1); 473 __ bctr(); 474 475 return entry; 476 } 477 478 // Interpreter intrinsic for WeakReference.get(). 479 // 1. Don't push a full blown frame and go on dispatching, but fetch the value 480 // into R8 and return quickly 481 // 2. If G1 is active we *must* execute this intrinsic for corrrectness: 482 // It contains a GC barrier which puts the reference into the satb buffer 483 // to indicate that someone holds a strong reference to the object the 484 // weak ref points to! 485 address TemplateInterpreterGenerator::generate_Reference_get_entry(void) { 486 // Code: _aload_0, _getfield, _areturn 487 // parameter size = 1 488 // 489 // The code that gets generated by this routine is split into 2 parts: 490 // 1. the "intrinsified" code for G1 (or any SATB based GC), 491 // 2. the slow path - which is an expansion of the regular method entry. 492 // 493 // Notes: 494 // * In the G1 code we do not check whether we need to block for 495 // a safepoint. If G1 is enabled then we must execute the specialized 496 // code for Reference.get (except when the Reference object is null) 497 // so that we can log the value in the referent field with an SATB 498 // update buffer. 499 // If the code for the getfield template is modified so that the 500 // G1 pre-barrier code is executed when the current method is 501 // Reference.get() then going through the normal method entry 502 // will be fine. 503 // * The G1 code can, however, check the receiver object (the instance 504 // of java.lang.Reference) and jump to the slow path if null. If the 505 // Reference object is null then we obviously cannot fetch the referent 506 // and so we don't need to call the G1 pre-barrier. Thus we can use the 507 // regular method entry code to generate the NPE. 508 // 509 510 if (UseG1GC) { 511 address entry = __ pc(); 512 513 const int referent_offset = java_lang_ref_Reference::referent_offset; 514 guarantee(referent_offset > 0, "referent offset not initialized"); 515 516 Label slow_path; 517 518 // Debugging not possible, so can't use __ skip_if_jvmti_mode(slow_path, GR31_SCRATCH); 519 520 // In the G1 code we don't check if we need to reach a safepoint. We 521 // continue and the thread will safepoint at the next bytecode dispatch. 522 523 // If the receiver is null then it is OK to jump to the slow path. 524 __ ld(R3_RET, Interpreter::stackElementSize, R15_esp); // get receiver 525 526 // Check if receiver == NULL and go the slow path. 527 __ cmpdi(CCR0, R3_RET, 0); 528 __ beq(CCR0, slow_path); 529 530 // Load the value of the referent field. 531 __ load_heap_oop(R3_RET, referent_offset, R3_RET); 532 533 // Generate the G1 pre-barrier code to log the value of 534 // the referent field in an SATB buffer. Note with 535 // these parameters the pre-barrier does not generate 536 // the load of the previous value. 537 538 // Restore caller sp for c2i case. 539 #ifdef ASSERT 540 __ ld(R9_ARG7, 0, R1_SP); 541 __ ld(R10_ARG8, 0, R21_sender_SP); 542 __ cmpd(CCR0, R9_ARG7, R10_ARG8); 543 __ asm_assert_eq("backlink", 0x544); 544 #endif // ASSERT 545 __ mr(R1_SP, R21_sender_SP); // Cut the stack back to where the caller started. 546 547 __ g1_write_barrier_pre(noreg, // obj 548 noreg, // offset 549 R3_RET, // pre_val 550 R11_scratch1, // tmp 551 R12_scratch2, // tmp 552 true); // needs_frame 553 554 __ blr(); 555 556 // Generate regular method entry. 557 __ bind(slow_path); 558 __ jump_to_entry(Interpreter::entry_for_kind(Interpreter::zerolocals), R11_scratch1); 559 return entry; 560 } 561 562 return NULL; 563 } 564 565 address TemplateInterpreterGenerator::generate_StackOverflowError_handler() { 566 address entry = __ pc(); 567 568 // Expression stack must be empty before entering the VM if an 569 // exception happened. 570 __ empty_expression_stack(); 571 // Throw exception. 572 __ call_VM(noreg, 573 CAST_FROM_FN_PTR(address, 574 InterpreterRuntime::throw_StackOverflowError)); 575 return entry; 576 } 577 578 address TemplateInterpreterGenerator::generate_ArrayIndexOutOfBounds_handler(const char* name) { 579 address entry = __ pc(); 580 __ empty_expression_stack(); 581 __ load_const_optimized(R4_ARG2, (address) name); 582 // Index is in R17_tos. 583 __ mr(R5_ARG3, R17_tos); 584 __ call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::throw_ArrayIndexOutOfBoundsException)); 585 return entry; 586 } 587 588 #if 0 589 // Call special ClassCastException constructor taking object to cast 590 // and target class as arguments. 591 address TemplateInterpreterGenerator::generate_ClassCastException_verbose_handler() { 592 address entry = __ pc(); 593 594 // Expression stack must be empty before entering the VM if an 595 // exception happened. 596 __ empty_expression_stack(); 597 598 // Thread will be loaded to R3_ARG1. 599 // Target class oop is in register R5_ARG3 by convention! 600 __ call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::throw_ClassCastException_verbose), R17_tos, R5_ARG3); 601 // Above call must not return here since exception pending. 602 DEBUG_ONLY(__ should_not_reach_here();) 603 return entry; 604 } 605 #endif 606 607 address TemplateInterpreterGenerator::generate_ClassCastException_handler() { 608 address entry = __ pc(); 609 // Expression stack must be empty before entering the VM if an 610 // exception happened. 611 __ empty_expression_stack(); 612 613 // Load exception object. 614 // Thread will be loaded to R3_ARG1. 615 __ call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::throw_ClassCastException), R17_tos); 616 #ifdef ASSERT 617 // Above call must not return here since exception pending. 618 __ should_not_reach_here(); 619 #endif 620 return entry; 621 } 622 623 address TemplateInterpreterGenerator::generate_exception_handler_common(const char* name, const char* message, bool pass_oop) { 624 address entry = __ pc(); 625 //__ untested("generate_exception_handler_common"); 626 Register Rexception = R17_tos; 627 628 // Expression stack must be empty before entering the VM if an exception happened. 629 __ empty_expression_stack(); 630 631 __ load_const_optimized(R4_ARG2, (address) name, R11_scratch1); 632 if (pass_oop) { 633 __ mr(R5_ARG3, Rexception); 634 __ call_VM(Rexception, CAST_FROM_FN_PTR(address, InterpreterRuntime::create_klass_exception), false); 635 } else { 636 __ load_const_optimized(R5_ARG3, (address) message, R11_scratch1); 637 __ call_VM(Rexception, CAST_FROM_FN_PTR(address, InterpreterRuntime::create_exception), false); 638 } 639 640 // Throw exception. 641 __ mr(R3_ARG1, Rexception); 642 __ load_const_optimized(R11_scratch1, Interpreter::throw_exception_entry(), R12_scratch2); 643 __ mtctr(R11_scratch1); 644 __ bctr(); 645 646 return entry; 647 } 648 649 address TemplateInterpreterGenerator::generate_continuation_for(TosState state) { 650 address entry = __ pc(); 651 __ unimplemented("generate_continuation_for"); 652 return entry; 653 } 654 655 // This entry is returned to when a call returns to the interpreter. 656 // When we arrive here, we expect that the callee stack frame is already popped. 657 address TemplateInterpreterGenerator::generate_return_entry_for(TosState state, int step, size_t index_size) { 658 address entry = __ pc(); 659 660 // Move the value out of the return register back to the TOS cache of current frame. 661 switch (state) { 662 case ltos: 663 case btos: 664 case ztos: 665 case ctos: 666 case stos: 667 case atos: 668 case itos: __ mr(R17_tos, R3_RET); break; // RET -> TOS cache 669 case ftos: 670 case dtos: __ fmr(F15_ftos, F1_RET); break; // TOS cache -> GR_FRET 671 case vtos: break; // Nothing to do, this was a void return. 672 default : ShouldNotReachHere(); 673 } 674 675 __ restore_interpreter_state(R11_scratch1); // Sets R11_scratch1 = fp. 676 __ ld(R12_scratch2, _ijava_state_neg(top_frame_sp), R11_scratch1); 677 __ resize_frame_absolute(R12_scratch2, R11_scratch1, R0); 678 679 // Compiled code destroys templateTableBase, reload. 680 __ load_const_optimized(R25_templateTableBase, (address)Interpreter::dispatch_table((TosState)0), R12_scratch2); 681 682 if (state == atos) { 683 __ profile_return_type(R3_RET, R11_scratch1, R12_scratch2); 684 } 685 686 const Register cache = R11_scratch1; 687 const Register size = R12_scratch2; 688 __ get_cache_and_index_at_bcp(cache, 1, index_size); 689 690 // Get least significant byte of 64 bit value: 691 #if defined(VM_LITTLE_ENDIAN) 692 __ lbz(size, in_bytes(ConstantPoolCache::base_offset() + ConstantPoolCacheEntry::flags_offset()), cache); 693 #else 694 __ lbz(size, in_bytes(ConstantPoolCache::base_offset() + ConstantPoolCacheEntry::flags_offset()) + 7, cache); 695 #endif 696 __ sldi(size, size, Interpreter::logStackElementSize); 697 __ add(R15_esp, R15_esp, size); 698 __ dispatch_next(state, step); 699 return entry; 700 } 701 702 address TemplateInterpreterGenerator::generate_deopt_entry_for(TosState state, int step) { 703 address entry = __ pc(); 704 // If state != vtos, we're returning from a native method, which put it's result 705 // into the result register. So move the value out of the return register back 706 // to the TOS cache of current frame. 707 708 switch (state) { 709 case ltos: 710 case btos: 711 case ztos: 712 case ctos: 713 case stos: 714 case atos: 715 case itos: __ mr(R17_tos, R3_RET); break; // GR_RET -> TOS cache 716 case ftos: 717 case dtos: __ fmr(F15_ftos, F1_RET); break; // TOS cache -> GR_FRET 718 case vtos: break; // Nothing to do, this was a void return. 719 default : ShouldNotReachHere(); 720 } 721 722 // Load LcpoolCache @@@ should be already set! 723 __ get_constant_pool_cache(R27_constPoolCache); 724 725 // Handle a pending exception, fall through if none. 726 __ check_and_forward_exception(R11_scratch1, R12_scratch2); 727 728 // Start executing bytecodes. 729 __ dispatch_next(state, step); 730 731 return entry; 732 } 733 734 address TemplateInterpreterGenerator::generate_safept_entry_for(TosState state, address runtime_entry) { 735 address entry = __ pc(); 736 737 __ push(state); 738 __ call_VM(noreg, runtime_entry); 739 __ dispatch_via(vtos, Interpreter::_normal_table.table_for(vtos)); 740 741 return entry; 742 } 743 744 // Helpers for commoning out cases in the various type of method entries. 745 746 // Increment invocation count & check for overflow. 747 // 748 // Note: checking for negative value instead of overflow 749 // so we have a 'sticky' overflow test. 750 // 751 void TemplateInterpreterGenerator::generate_counter_incr(Label* overflow, Label* profile_method, Label* profile_method_continue) { 752 // Note: In tiered we increment either counters in method or in MDO depending if we're profiling or not. 753 Register Rscratch1 = R11_scratch1; 754 Register Rscratch2 = R12_scratch2; 755 Register R3_counters = R3_ARG1; 756 Label done; 757 758 if (TieredCompilation) { 759 const int increment = InvocationCounter::count_increment; 760 Label no_mdo; 761 if (ProfileInterpreter) { 762 const Register Rmdo = R3_counters; 763 // If no method data exists, go to profile_continue. 764 __ ld(Rmdo, in_bytes(Method::method_data_offset()), R19_method); 765 __ cmpdi(CCR0, Rmdo, 0); 766 __ beq(CCR0, no_mdo); 767 768 // Increment invocation counter in the MDO. 769 const int mdo_ic_offs = in_bytes(MethodData::invocation_counter_offset()) + in_bytes(InvocationCounter::counter_offset()); 770 __ lwz(Rscratch2, mdo_ic_offs, Rmdo); 771 __ lwz(Rscratch1, in_bytes(MethodData::invoke_mask_offset()), Rmdo); 772 __ addi(Rscratch2, Rscratch2, increment); 773 __ stw(Rscratch2, mdo_ic_offs, Rmdo); 774 __ and_(Rscratch1, Rscratch2, Rscratch1); 775 __ bne(CCR0, done); 776 __ b(*overflow); 777 } 778 779 // Increment counter in MethodCounters*. 780 const int mo_ic_offs = in_bytes(MethodCounters::invocation_counter_offset()) + in_bytes(InvocationCounter::counter_offset()); 781 __ bind(no_mdo); 782 __ get_method_counters(R19_method, R3_counters, done); 783 __ lwz(Rscratch2, mo_ic_offs, R3_counters); 784 __ lwz(Rscratch1, in_bytes(MethodCounters::invoke_mask_offset()), R3_counters); 785 __ addi(Rscratch2, Rscratch2, increment); 786 __ stw(Rscratch2, mo_ic_offs, R3_counters); 787 __ and_(Rscratch1, Rscratch2, Rscratch1); 788 __ beq(CCR0, *overflow); 789 790 __ bind(done); 791 792 } else { 793 794 // Update standard invocation counters. 795 Register Rsum_ivc_bec = R4_ARG2; 796 __ get_method_counters(R19_method, R3_counters, done); 797 __ increment_invocation_counter(R3_counters, Rsum_ivc_bec, R12_scratch2); 798 // Increment interpreter invocation counter. 799 if (ProfileInterpreter) { // %%% Merge this into methodDataOop. 800 __ lwz(R12_scratch2, in_bytes(MethodCounters::interpreter_invocation_counter_offset()), R3_counters); 801 __ addi(R12_scratch2, R12_scratch2, 1); 802 __ stw(R12_scratch2, in_bytes(MethodCounters::interpreter_invocation_counter_offset()), R3_counters); 803 } 804 // Check if we must create a method data obj. 805 if (ProfileInterpreter && profile_method != NULL) { 806 const Register profile_limit = Rscratch1; 807 __ lwz(profile_limit, in_bytes(MethodCounters::interpreter_profile_limit_offset()), R3_counters); 808 // Test to see if we should create a method data oop. 809 __ cmpw(CCR0, Rsum_ivc_bec, profile_limit); 810 __ blt(CCR0, *profile_method_continue); 811 // If no method data exists, go to profile_method. 812 __ test_method_data_pointer(*profile_method); 813 } 814 // Finally check for counter overflow. 815 if (overflow) { 816 const Register invocation_limit = Rscratch1; 817 __ lwz(invocation_limit, in_bytes(MethodCounters::interpreter_invocation_limit_offset()), R3_counters); 818 __ cmpw(CCR0, Rsum_ivc_bec, invocation_limit); 819 __ bge(CCR0, *overflow); 820 } 821 822 __ bind(done); 823 } 824 } 825 826 // Generate code to initiate compilation on invocation counter overflow. 827 void TemplateInterpreterGenerator::generate_counter_overflow(Label& continue_entry) { 828 // Generate code to initiate compilation on the counter overflow. 829 830 // InterpreterRuntime::frequency_counter_overflow takes one arguments, 831 // which indicates if the counter overflow occurs at a backwards branch (NULL bcp) 832 // We pass zero in. 833 // The call returns the address of the verified entry point for the method or NULL 834 // if the compilation did not complete (either went background or bailed out). 835 // 836 // Unlike the C++ interpreter above: Check exceptions! 837 // Assumption: Caller must set the flag "do_not_unlock_if_sychronized" if the monitor of a sync'ed 838 // method has not yet been created. Thus, no unlocking of a non-existing monitor can occur. 839 840 __ li(R4_ARG2, 0); 841 __ call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::frequency_counter_overflow), R4_ARG2, true); 842 843 // Returns verified_entry_point or NULL. 844 // We ignore it in any case. 845 __ b(continue_entry); 846 } 847 848 // See if we've got enough room on the stack for locals plus overhead below 849 // JavaThread::stack_overflow_limit(). If not, throw a StackOverflowError 850 // without going through the signal handler, i.e., reserved and yellow zones 851 // will not be made usable. The shadow zone must suffice to handle the 852 // overflow. 853 // 854 // Kills Rmem_frame_size, Rscratch1. 855 void TemplateInterpreterGenerator::generate_stack_overflow_check(Register Rmem_frame_size, Register Rscratch1) { 856 Label done; 857 assert_different_registers(Rmem_frame_size, Rscratch1); 858 859 BLOCK_COMMENT("stack_overflow_check_with_compare {"); 860 __ sub(Rmem_frame_size, R1_SP, Rmem_frame_size); 861 __ ld(Rscratch1, thread_(stack_overflow_limit)); 862 __ cmpld(CCR0/*is_stack_overflow*/, Rmem_frame_size, Rscratch1); 863 __ bgt(CCR0/*is_stack_overflow*/, done); 864 865 // The stack overflows. Load target address of the runtime stub and call it. 866 assert(StubRoutines::throw_StackOverflowError_entry() != NULL, "generated in wrong order"); 867 __ load_const_optimized(Rscratch1, (StubRoutines::throw_StackOverflowError_entry()), R0); 868 __ mtctr(Rscratch1); 869 // Restore caller_sp. 870 #ifdef ASSERT 871 __ ld(Rscratch1, 0, R1_SP); 872 __ ld(R0, 0, R21_sender_SP); 873 __ cmpd(CCR0, R0, Rscratch1); 874 __ asm_assert_eq("backlink", 0x547); 875 #endif // ASSERT 876 __ mr(R1_SP, R21_sender_SP); 877 __ bctr(); 878 879 __ align(32, 12); 880 __ bind(done); 881 BLOCK_COMMENT("} stack_overflow_check_with_compare"); 882 } 883 884 void TemplateInterpreterGenerator::unlock_method(bool check_exceptions) { 885 __ unlock_object(R26_monitor, check_exceptions); 886 } 887 888 // Lock the current method, interpreter register window must be set up! 889 void TemplateInterpreterGenerator::lock_method(Register Rflags, Register Rscratch1, Register Rscratch2, bool flags_preloaded) { 890 const Register Robj_to_lock = Rscratch2; 891 892 { 893 if (!flags_preloaded) { 894 __ lwz(Rflags, method_(access_flags)); 895 } 896 897 #ifdef ASSERT 898 // Check if methods needs synchronization. 899 { 900 Label Lok; 901 __ testbitdi(CCR0, R0, Rflags, JVM_ACC_SYNCHRONIZED_BIT); 902 __ btrue(CCR0,Lok); 903 __ stop("method doesn't need synchronization"); 904 __ bind(Lok); 905 } 906 #endif // ASSERT 907 } 908 909 // Get synchronization object to Rscratch2. 910 { 911 Label Lstatic; 912 Label Ldone; 913 914 __ testbitdi(CCR0, R0, Rflags, JVM_ACC_STATIC_BIT); 915 __ btrue(CCR0, Lstatic); 916 917 // Non-static case: load receiver obj from stack and we're done. 918 __ ld(Robj_to_lock, R18_locals); 919 __ b(Ldone); 920 921 __ bind(Lstatic); // Static case: Lock the java mirror 922 __ load_mirror(Robj_to_lock, R19_method); 923 924 __ bind(Ldone); 925 __ verify_oop(Robj_to_lock); 926 } 927 928 // Got the oop to lock => execute! 929 __ add_monitor_to_stack(true, Rscratch1, R0); 930 931 __ std(Robj_to_lock, BasicObjectLock::obj_offset_in_bytes(), R26_monitor); 932 __ lock_object(R26_monitor, Robj_to_lock); 933 } 934 935 // Generate a fixed interpreter frame for pure interpreter 936 // and I2N native transition frames. 937 // 938 // Before (stack grows downwards): 939 // 940 // | ... | 941 // |------------- | 942 // | java arg0 | 943 // | ... | 944 // | java argn | 945 // | | <- R15_esp 946 // | | 947 // |--------------| 948 // | abi_112 | 949 // | | <- R1_SP 950 // |==============| 951 // 952 // 953 // After: 954 // 955 // | ... | 956 // | java arg0 |<- R18_locals 957 // | ... | 958 // | java argn | 959 // |--------------| 960 // | | 961 // | java locals | 962 // | | 963 // |--------------| 964 // | abi_48 | 965 // |==============| 966 // | | 967 // | istate | 968 // | | 969 // |--------------| 970 // | monitor |<- R26_monitor 971 // |--------------| 972 // | |<- R15_esp 973 // | expression | 974 // | stack | 975 // | | 976 // |--------------| 977 // | | 978 // | abi_112 |<- R1_SP 979 // |==============| 980 // 981 // The top most frame needs an abi space of 112 bytes. This space is needed, 982 // since we call to c. The c function may spill their arguments to the caller 983 // frame. When we call to java, we don't need these spill slots. In order to save 984 // space on the stack, we resize the caller. However, java locals reside in 985 // the caller frame and the frame has to be increased. The frame_size for the 986 // current frame was calculated based on max_stack as size for the expression 987 // stack. At the call, just a part of the expression stack might be used. 988 // We don't want to waste this space and cut the frame back accordingly. 989 // The resulting amount for resizing is calculated as follows: 990 // resize = (number_of_locals - number_of_arguments) * slot_size 991 // + (R1_SP - R15_esp) + 48 992 // 993 // The size for the callee frame is calculated: 994 // framesize = 112 + max_stack + monitor + state_size 995 // 996 // maxstack: Max number of slots on the expression stack, loaded from the method. 997 // monitor: We statically reserve room for one monitor object. 998 // state_size: We save the current state of the interpreter to this area. 999 // 1000 void TemplateInterpreterGenerator::generate_fixed_frame(bool native_call, Register Rsize_of_parameters, Register Rsize_of_locals) { 1001 Register parent_frame_resize = R6_ARG4, // Frame will grow by this number of bytes. 1002 top_frame_size = R7_ARG5, 1003 Rconst_method = R8_ARG6; 1004 1005 assert_different_registers(Rsize_of_parameters, Rsize_of_locals, parent_frame_resize, top_frame_size); 1006 1007 __ ld(Rconst_method, method_(const)); 1008 __ lhz(Rsize_of_parameters /* number of params */, 1009 in_bytes(ConstMethod::size_of_parameters_offset()), Rconst_method); 1010 if (native_call) { 1011 // If we're calling a native method, we reserve space for the worst-case signature 1012 // handler varargs vector, which is max(Argument::n_register_parameters, parameter_count+2). 1013 // We add two slots to the parameter_count, one for the jni 1014 // environment and one for a possible native mirror. 1015 Label skip_native_calculate_max_stack; 1016 __ addi(top_frame_size, Rsize_of_parameters, 2); 1017 __ cmpwi(CCR0, top_frame_size, Argument::n_register_parameters); 1018 __ bge(CCR0, skip_native_calculate_max_stack); 1019 __ li(top_frame_size, Argument::n_register_parameters); 1020 __ bind(skip_native_calculate_max_stack); 1021 __ sldi(Rsize_of_parameters, Rsize_of_parameters, Interpreter::logStackElementSize); 1022 __ sldi(top_frame_size, top_frame_size, Interpreter::logStackElementSize); 1023 __ sub(parent_frame_resize, R1_SP, R15_esp); // <0, off by Interpreter::stackElementSize! 1024 assert(Rsize_of_locals == noreg, "Rsize_of_locals not initialized"); // Only relevant value is Rsize_of_parameters. 1025 } else { 1026 __ lhz(Rsize_of_locals /* number of params */, in_bytes(ConstMethod::size_of_locals_offset()), Rconst_method); 1027 __ sldi(Rsize_of_parameters, Rsize_of_parameters, Interpreter::logStackElementSize); 1028 __ sldi(Rsize_of_locals, Rsize_of_locals, Interpreter::logStackElementSize); 1029 __ lhz(top_frame_size, in_bytes(ConstMethod::max_stack_offset()), Rconst_method); 1030 __ sub(R11_scratch1, Rsize_of_locals, Rsize_of_parameters); // >=0 1031 __ sub(parent_frame_resize, R1_SP, R15_esp); // <0, off by Interpreter::stackElementSize! 1032 __ sldi(top_frame_size, top_frame_size, Interpreter::logStackElementSize); 1033 __ add(parent_frame_resize, parent_frame_resize, R11_scratch1); 1034 } 1035 1036 // Compute top frame size. 1037 __ addi(top_frame_size, top_frame_size, frame::abi_reg_args_size + frame::ijava_state_size); 1038 1039 // Cut back area between esp and max_stack. 1040 __ addi(parent_frame_resize, parent_frame_resize, frame::abi_minframe_size - Interpreter::stackElementSize); 1041 1042 __ round_to(top_frame_size, frame::alignment_in_bytes); 1043 __ round_to(parent_frame_resize, frame::alignment_in_bytes); 1044 // parent_frame_resize = (locals-parameters) - (ESP-SP-ABI48) Rounded to frame alignment size. 1045 // Enlarge by locals-parameters (not in case of native_call), shrink by ESP-SP-ABI48. 1046 1047 if (!native_call) { 1048 // Stack overflow check. 1049 // Native calls don't need the stack size check since they have no 1050 // expression stack and the arguments are already on the stack and 1051 // we only add a handful of words to the stack. 1052 __ add(R11_scratch1, parent_frame_resize, top_frame_size); 1053 generate_stack_overflow_check(R11_scratch1, R12_scratch2); 1054 } 1055 1056 // Set up interpreter state registers. 1057 1058 __ add(R18_locals, R15_esp, Rsize_of_parameters); 1059 __ ld(R27_constPoolCache, in_bytes(ConstMethod::constants_offset()), Rconst_method); 1060 __ ld(R27_constPoolCache, ConstantPool::cache_offset_in_bytes(), R27_constPoolCache); 1061 1062 // Set method data pointer. 1063 if (ProfileInterpreter) { 1064 Label zero_continue; 1065 __ ld(R28_mdx, method_(method_data)); 1066 __ cmpdi(CCR0, R28_mdx, 0); 1067 __ beq(CCR0, zero_continue); 1068 __ addi(R28_mdx, R28_mdx, in_bytes(MethodData::data_offset())); 1069 __ bind(zero_continue); 1070 } 1071 1072 if (native_call) { 1073 __ li(R14_bcp, 0); // Must initialize. 1074 } else { 1075 __ add(R14_bcp, in_bytes(ConstMethod::codes_offset()), Rconst_method); 1076 } 1077 1078 // Resize parent frame. 1079 __ mflr(R12_scratch2); 1080 __ neg(parent_frame_resize, parent_frame_resize); 1081 __ resize_frame(parent_frame_resize, R11_scratch1); 1082 __ std(R12_scratch2, _abi(lr), R1_SP); 1083 1084 __ addi(R26_monitor, R1_SP, - frame::ijava_state_size); 1085 __ addi(R15_esp, R26_monitor, - Interpreter::stackElementSize); 1086 1087 // Get mirror and store it in the frame as GC root for this Method*. 1088 __ load_mirror(R12_scratch2, R19_method); 1089 1090 // Store values. 1091 // R15_esp, R14_bcp, R26_monitor, R28_mdx are saved at java calls 1092 // in InterpreterMacroAssembler::call_from_interpreter. 1093 __ std(R19_method, _ijava_state_neg(method), R1_SP); 1094 __ std(R12_scratch2, _ijava_state_neg(mirror), R1_SP); 1095 __ std(R21_sender_SP, _ijava_state_neg(sender_sp), R1_SP); 1096 __ std(R27_constPoolCache, _ijava_state_neg(cpoolCache), R1_SP); 1097 __ std(R18_locals, _ijava_state_neg(locals), R1_SP); 1098 1099 // Note: esp, bcp, monitor, mdx live in registers. Hence, the correct version can only 1100 // be found in the frame after save_interpreter_state is done. This is always true 1101 // for non-top frames. But when a signal occurs, dumping the top frame can go wrong, 1102 // because e.g. frame::interpreter_frame_bcp() will not access the correct value 1103 // (Enhanced Stack Trace). 1104 // The signal handler does not save the interpreter state into the frame. 1105 __ li(R0, 0); 1106 #ifdef ASSERT 1107 // Fill remaining slots with constants. 1108 __ load_const_optimized(R11_scratch1, 0x5afe); 1109 __ load_const_optimized(R12_scratch2, 0xdead); 1110 #endif 1111 // We have to initialize some frame slots for native calls (accessed by GC). 1112 if (native_call) { 1113 __ std(R26_monitor, _ijava_state_neg(monitors), R1_SP); 1114 __ std(R14_bcp, _ijava_state_neg(bcp), R1_SP); 1115 if (ProfileInterpreter) { __ std(R28_mdx, _ijava_state_neg(mdx), R1_SP); } 1116 } 1117 #ifdef ASSERT 1118 else { 1119 __ std(R12_scratch2, _ijava_state_neg(monitors), R1_SP); 1120 __ std(R12_scratch2, _ijava_state_neg(bcp), R1_SP); 1121 __ std(R12_scratch2, _ijava_state_neg(mdx), R1_SP); 1122 } 1123 __ std(R11_scratch1, _ijava_state_neg(ijava_reserved), R1_SP); 1124 __ std(R12_scratch2, _ijava_state_neg(esp), R1_SP); 1125 __ std(R12_scratch2, _ijava_state_neg(lresult), R1_SP); 1126 __ std(R12_scratch2, _ijava_state_neg(fresult), R1_SP); 1127 #endif 1128 __ subf(R12_scratch2, top_frame_size, R1_SP); 1129 __ std(R0, _ijava_state_neg(oop_tmp), R1_SP); 1130 __ std(R12_scratch2, _ijava_state_neg(top_frame_sp), R1_SP); 1131 1132 // Push top frame. 1133 __ push_frame(top_frame_size, R11_scratch1); 1134 } 1135 1136 // End of helpers 1137 1138 address TemplateInterpreterGenerator::generate_math_entry(AbstractInterpreter::MethodKind kind) { 1139 if (!Interpreter::math_entry_available(kind)) { 1140 NOT_PRODUCT(__ should_not_reach_here();) 1141 return NULL; 1142 } 1143 1144 address entry = __ pc(); 1145 1146 __ lfd(F1_RET, Interpreter::stackElementSize, R15_esp); 1147 1148 // Pop c2i arguments (if any) off when we return. 1149 #ifdef ASSERT 1150 __ ld(R9_ARG7, 0, R1_SP); 1151 __ ld(R10_ARG8, 0, R21_sender_SP); 1152 __ cmpd(CCR0, R9_ARG7, R10_ARG8); 1153 __ asm_assert_eq("backlink", 0x545); 1154 #endif // ASSERT 1155 __ mr(R1_SP, R21_sender_SP); // Cut the stack back to where the caller started. 1156 1157 if (kind == Interpreter::java_lang_math_sqrt) { 1158 __ fsqrt(F1_RET, F1_RET); 1159 } else if (kind == Interpreter::java_lang_math_abs) { 1160 __ fabs(F1_RET, F1_RET); 1161 } else { 1162 ShouldNotReachHere(); 1163 } 1164 1165 // And we're done. 1166 __ blr(); 1167 1168 __ flush(); 1169 1170 return entry; 1171 } 1172 1173 void TemplateInterpreterGenerator::bang_stack_shadow_pages(bool native_call) { 1174 // Quick & dirty stack overflow checking: bang the stack & handle trap. 1175 // Note that we do the banging after the frame is setup, since the exception 1176 // handling code expects to find a valid interpreter frame on the stack. 1177 // Doing the banging earlier fails if the caller frame is not an interpreter 1178 // frame. 1179 // (Also, the exception throwing code expects to unlock any synchronized 1180 // method receiever, so do the banging after locking the receiver.) 1181 1182 // Bang each page in the shadow zone. We can't assume it's been done for 1183 // an interpreter frame with greater than a page of locals, so each page 1184 // needs to be checked. Only true for non-native. 1185 if (UseStackBanging) { 1186 const int page_size = os::vm_page_size(); 1187 const int n_shadow_pages = ((int)JavaThread::stack_shadow_zone_size()) / page_size; 1188 const int start_page = native_call ? n_shadow_pages : 1; 1189 BLOCK_COMMENT("bang_stack_shadow_pages:"); 1190 for (int pages = start_page; pages <= n_shadow_pages; pages++) { 1191 __ bang_stack_with_offset(pages*page_size); 1192 } 1193 } 1194 } 1195 1196 // Interpreter stub for calling a native method. (asm interpreter) 1197 // This sets up a somewhat different looking stack for calling the 1198 // native method than the typical interpreter frame setup. 1199 // 1200 // On entry: 1201 // R19_method - method 1202 // R16_thread - JavaThread* 1203 // R15_esp - intptr_t* sender tos 1204 // 1205 // abstract stack (grows up) 1206 // [ IJava (caller of JNI callee) ] <-- ASP 1207 // ... 1208 address TemplateInterpreterGenerator::generate_native_entry(bool synchronized) { 1209 1210 address entry = __ pc(); 1211 1212 const bool inc_counter = UseCompiler || CountCompiledCalls || LogTouchedMethods; 1213 1214 // ----------------------------------------------------------------------------- 1215 // Allocate a new frame that represents the native callee (i2n frame). 1216 // This is not a full-blown interpreter frame, but in particular, the 1217 // following registers are valid after this: 1218 // - R19_method 1219 // - R18_local (points to start of arguments to native function) 1220 // 1221 // abstract stack (grows up) 1222 // [ IJava (caller of JNI callee) ] <-- ASP 1223 // ... 1224 1225 const Register signature_handler_fd = R11_scratch1; 1226 const Register pending_exception = R0; 1227 const Register result_handler_addr = R31; 1228 const Register native_method_fd = R11_scratch1; 1229 const Register access_flags = R22_tmp2; 1230 const Register active_handles = R11_scratch1; // R26_monitor saved to state. 1231 const Register sync_state = R12_scratch2; 1232 const Register sync_state_addr = sync_state; // Address is dead after use. 1233 const Register suspend_flags = R11_scratch1; 1234 1235 //============================================================================= 1236 // Allocate new frame and initialize interpreter state. 1237 1238 Label exception_return; 1239 Label exception_return_sync_check; 1240 Label stack_overflow_return; 1241 1242 // Generate new interpreter state and jump to stack_overflow_return in case of 1243 // a stack overflow. 1244 //generate_compute_interpreter_state(stack_overflow_return); 1245 1246 Register size_of_parameters = R22_tmp2; 1247 1248 generate_fixed_frame(true, size_of_parameters, noreg /* unused */); 1249 1250 //============================================================================= 1251 // Increment invocation counter. On overflow, entry to JNI method 1252 // will be compiled. 1253 Label invocation_counter_overflow, continue_after_compile; 1254 if (inc_counter) { 1255 if (synchronized) { 1256 // Since at this point in the method invocation the exception handler 1257 // would try to exit the monitor of synchronized methods which hasn't 1258 // been entered yet, we set the thread local variable 1259 // _do_not_unlock_if_synchronized to true. If any exception was thrown by 1260 // runtime, exception handling i.e. unlock_if_synchronized_method will 1261 // check this thread local flag. 1262 // This flag has two effects, one is to force an unwind in the topmost 1263 // interpreter frame and not perform an unlock while doing so. 1264 __ li(R0, 1); 1265 __ stb(R0, in_bytes(JavaThread::do_not_unlock_if_synchronized_offset()), R16_thread); 1266 } 1267 generate_counter_incr(&invocation_counter_overflow, NULL, NULL); 1268 1269 BIND(continue_after_compile); 1270 } 1271 1272 bang_stack_shadow_pages(true); 1273 1274 if (inc_counter) { 1275 // Reset the _do_not_unlock_if_synchronized flag. 1276 if (synchronized) { 1277 __ li(R0, 0); 1278 __ stb(R0, in_bytes(JavaThread::do_not_unlock_if_synchronized_offset()), R16_thread); 1279 } 1280 } 1281 1282 // access_flags = method->access_flags(); 1283 // Load access flags. 1284 assert(access_flags->is_nonvolatile(), 1285 "access_flags must be in a non-volatile register"); 1286 // Type check. 1287 assert(4 == sizeof(AccessFlags), "unexpected field size"); 1288 __ lwz(access_flags, method_(access_flags)); 1289 1290 // We don't want to reload R19_method and access_flags after calls 1291 // to some helper functions. 1292 assert(R19_method->is_nonvolatile(), 1293 "R19_method must be a non-volatile register"); 1294 1295 // Check for synchronized methods. Must happen AFTER invocation counter 1296 // check, so method is not locked if counter overflows. 1297 1298 if (synchronized) { 1299 lock_method(access_flags, R11_scratch1, R12_scratch2, true); 1300 1301 // Update monitor in state. 1302 __ ld(R11_scratch1, 0, R1_SP); 1303 __ std(R26_monitor, _ijava_state_neg(monitors), R11_scratch1); 1304 } 1305 1306 // jvmti/jvmpi support 1307 __ notify_method_entry(); 1308 1309 //============================================================================= 1310 // Get and call the signature handler. 1311 1312 __ ld(signature_handler_fd, method_(signature_handler)); 1313 Label call_signature_handler; 1314 1315 __ cmpdi(CCR0, signature_handler_fd, 0); 1316 __ bne(CCR0, call_signature_handler); 1317 1318 // Method has never been called. Either generate a specialized 1319 // handler or point to the slow one. 1320 // 1321 // Pass parameter 'false' to avoid exception check in call_VM. 1322 __ call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::prepare_native_call), R19_method, false); 1323 1324 // Check for an exception while looking up the target method. If we 1325 // incurred one, bail. 1326 __ ld(pending_exception, thread_(pending_exception)); 1327 __ cmpdi(CCR0, pending_exception, 0); 1328 __ bne(CCR0, exception_return_sync_check); // Has pending exception. 1329 1330 // Reload signature handler, it may have been created/assigned in the meanwhile. 1331 __ ld(signature_handler_fd, method_(signature_handler)); 1332 __ twi_0(signature_handler_fd); // Order wrt. load of klass mirror and entry point (isync is below). 1333 1334 BIND(call_signature_handler); 1335 1336 // Before we call the signature handler we push a new frame to 1337 // protect the interpreter frame volatile registers when we return 1338 // from jni but before we can get back to Java. 1339 1340 // First set the frame anchor while the SP/FP registers are 1341 // convenient and the slow signature handler can use this same frame 1342 // anchor. 1343 1344 // We have a TOP_IJAVA_FRAME here, which belongs to us. 1345 __ set_top_ijava_frame_at_SP_as_last_Java_frame(R1_SP, R12_scratch2/*tmp*/); 1346 1347 // Now the interpreter frame (and its call chain) have been 1348 // invalidated and flushed. We are now protected against eager 1349 // being enabled in native code. Even if it goes eager the 1350 // registers will be reloaded as clean and we will invalidate after 1351 // the call so no spurious flush should be possible. 1352 1353 // Call signature handler and pass locals address. 1354 // 1355 // Our signature handlers copy required arguments to the C stack 1356 // (outgoing C args), R3_ARG1 to R10_ARG8, and FARG1 to FARG13. 1357 __ mr(R3_ARG1, R18_locals); 1358 #if !defined(ABI_ELFv2) 1359 __ ld(signature_handler_fd, 0, signature_handler_fd); 1360 #endif 1361 1362 __ call_stub(signature_handler_fd); 1363 1364 // Remove the register parameter varargs slots we allocated in 1365 // compute_interpreter_state. SP+16 ends up pointing to the ABI 1366 // outgoing argument area. 1367 // 1368 // Not needed on PPC64. 1369 //__ add(SP, SP, Argument::n_register_parameters*BytesPerWord); 1370 1371 assert(result_handler_addr->is_nonvolatile(), "result_handler_addr must be in a non-volatile register"); 1372 // Save across call to native method. 1373 __ mr(result_handler_addr, R3_RET); 1374 1375 __ isync(); // Acquire signature handler before trying to fetch the native entry point and klass mirror. 1376 1377 // Set up fixed parameters and call the native method. 1378 // If the method is static, get mirror into R4_ARG2. 1379 { 1380 Label method_is_not_static; 1381 // Access_flags is non-volatile and still, no need to restore it. 1382 1383 // Restore access flags. 1384 __ testbitdi(CCR0, R0, access_flags, JVM_ACC_STATIC_BIT); 1385 __ bfalse(CCR0, method_is_not_static); 1386 1387 __ load_mirror(R12_scratch2, R19_method); 1388 // state->_native_mirror = mirror; 1389 1390 __ ld(R11_scratch1, 0, R1_SP); 1391 __ std(R12_scratch2/*mirror*/, _ijava_state_neg(oop_tmp), R11_scratch1); 1392 // R4_ARG2 = &state->_oop_temp; 1393 __ addi(R4_ARG2, R11_scratch1, _ijava_state_neg(oop_tmp)); 1394 BIND(method_is_not_static); 1395 } 1396 1397 // At this point, arguments have been copied off the stack into 1398 // their JNI positions. Oops are boxed in-place on the stack, with 1399 // handles copied to arguments. The result handler address is in a 1400 // register. 1401 1402 // Pass JNIEnv address as first parameter. 1403 __ addir(R3_ARG1, thread_(jni_environment)); 1404 1405 // Load the native_method entry before we change the thread state. 1406 __ ld(native_method_fd, method_(native_function)); 1407 1408 //============================================================================= 1409 // Transition from _thread_in_Java to _thread_in_native. As soon as 1410 // we make this change the safepoint code needs to be certain that 1411 // the last Java frame we established is good. The pc in that frame 1412 // just needs to be near here not an actual return address. 1413 1414 // We use release_store_fence to update values like the thread state, where 1415 // we don't want the current thread to continue until all our prior memory 1416 // accesses (including the new thread state) are visible to other threads. 1417 __ li(R0, _thread_in_native); 1418 __ release(); 1419 1420 // TODO PPC port assert(4 == JavaThread::sz_thread_state(), "unexpected field size"); 1421 __ stw(R0, thread_(thread_state)); 1422 1423 if (UseMembar) { 1424 __ fence(); 1425 } 1426 1427 //============================================================================= 1428 // Call the native method. Argument registers must not have been 1429 // overwritten since "__ call_stub(signature_handler);" (except for 1430 // ARG1 and ARG2 for static methods). 1431 __ call_c(native_method_fd); 1432 1433 __ li(R0, 0); 1434 __ ld(R11_scratch1, 0, R1_SP); 1435 __ std(R3_RET, _ijava_state_neg(lresult), R11_scratch1); 1436 __ stfd(F1_RET, _ijava_state_neg(fresult), R11_scratch1); 1437 __ std(R0/*mirror*/, _ijava_state_neg(oop_tmp), R11_scratch1); // reset 1438 1439 // Note: C++ interpreter needs the following here: 1440 // The frame_manager_lr field, which we use for setting the last 1441 // java frame, gets overwritten by the signature handler. Restore 1442 // it now. 1443 //__ get_PC_trash_LR(R11_scratch1); 1444 //__ std(R11_scratch1, _top_ijava_frame_abi(frame_manager_lr), R1_SP); 1445 1446 // Because of GC R19_method may no longer be valid. 1447 1448 // Block, if necessary, before resuming in _thread_in_Java state. 1449 // In order for GC to work, don't clear the last_Java_sp until after 1450 // blocking. 1451 1452 //============================================================================= 1453 // Switch thread to "native transition" state before reading the 1454 // synchronization state. This additional state is necessary 1455 // because reading and testing the synchronization state is not 1456 // atomic w.r.t. GC, as this scenario demonstrates: Java thread A, 1457 // in _thread_in_native state, loads _not_synchronized and is 1458 // preempted. VM thread changes sync state to synchronizing and 1459 // suspends threads for GC. Thread A is resumed to finish this 1460 // native method, but doesn't block here since it didn't see any 1461 // synchronization in progress, and escapes. 1462 1463 // We use release_store_fence to update values like the thread state, where 1464 // we don't want the current thread to continue until all our prior memory 1465 // accesses (including the new thread state) are visible to other threads. 1466 __ li(R0/*thread_state*/, _thread_in_native_trans); 1467 __ release(); 1468 __ stw(R0/*thread_state*/, thread_(thread_state)); 1469 if (UseMembar) { 1470 __ fence(); 1471 } 1472 // Write serialization page so that the VM thread can do a pseudo remote 1473 // membar. We use the current thread pointer to calculate a thread 1474 // specific offset to write to within the page. This minimizes bus 1475 // traffic due to cache line collision. 1476 else { 1477 __ serialize_memory(R16_thread, R11_scratch1, R12_scratch2); 1478 } 1479 1480 // Now before we return to java we must look for a current safepoint 1481 // (a new safepoint can not start since we entered native_trans). 1482 // We must check here because a current safepoint could be modifying 1483 // the callers registers right this moment. 1484 1485 // Acquire isn't strictly necessary here because of the fence, but 1486 // sync_state is declared to be volatile, so we do it anyway 1487 // (cmp-br-isync on one path, release (same as acquire on PPC64) on the other path). 1488 int sync_state_offs = __ load_const_optimized(sync_state_addr, SafepointSynchronize::address_of_state(), /*temp*/R0, true); 1489 1490 // TODO PPC port assert(4 == SafepointSynchronize::sz_state(), "unexpected field size"); 1491 __ lwz(sync_state, sync_state_offs, sync_state_addr); 1492 1493 // TODO PPC port assert(4 == Thread::sz_suspend_flags(), "unexpected field size"); 1494 __ lwz(suspend_flags, thread_(suspend_flags)); 1495 1496 Label sync_check_done; 1497 Label do_safepoint; 1498 // No synchronization in progress nor yet synchronized. 1499 __ cmpwi(CCR0, sync_state, SafepointSynchronize::_not_synchronized); 1500 // Not suspended. 1501 __ cmpwi(CCR1, suspend_flags, 0); 1502 1503 __ bne(CCR0, do_safepoint); 1504 __ beq(CCR1, sync_check_done); 1505 __ bind(do_safepoint); 1506 __ isync(); 1507 // Block. We do the call directly and leave the current 1508 // last_Java_frame setup undisturbed. We must save any possible 1509 // native result across the call. No oop is present. 1510 1511 __ mr(R3_ARG1, R16_thread); 1512 #if defined(ABI_ELFv2) 1513 __ call_c(CAST_FROM_FN_PTR(address, JavaThread::check_special_condition_for_native_trans), 1514 relocInfo::none); 1515 #else 1516 __ call_c(CAST_FROM_FN_PTR(FunctionDescriptor*, JavaThread::check_special_condition_for_native_trans), 1517 relocInfo::none); 1518 #endif 1519 1520 __ bind(sync_check_done); 1521 1522 //============================================================================= 1523 // <<<<<< Back in Interpreter Frame >>>>> 1524 1525 // We are in thread_in_native_trans here and back in the normal 1526 // interpreter frame. We don't have to do anything special about 1527 // safepoints and we can switch to Java mode anytime we are ready. 1528 1529 // Note: frame::interpreter_frame_result has a dependency on how the 1530 // method result is saved across the call to post_method_exit. For 1531 // native methods it assumes that the non-FPU/non-void result is 1532 // saved in _native_lresult and a FPU result in _native_fresult. If 1533 // this changes then the interpreter_frame_result implementation 1534 // will need to be updated too. 1535 1536 // On PPC64, we have stored the result directly after the native call. 1537 1538 //============================================================================= 1539 // Back in Java 1540 1541 // We use release_store_fence to update values like the thread state, where 1542 // we don't want the current thread to continue until all our prior memory 1543 // accesses (including the new thread state) are visible to other threads. 1544 __ li(R0/*thread_state*/, _thread_in_Java); 1545 __ release(); 1546 __ stw(R0/*thread_state*/, thread_(thread_state)); 1547 if (UseMembar) { 1548 __ fence(); 1549 } 1550 1551 __ reset_last_Java_frame(); 1552 1553 // Jvmdi/jvmpi support. Whether we've got an exception pending or 1554 // not, and whether unlocking throws an exception or not, we notify 1555 // on native method exit. If we do have an exception, we'll end up 1556 // in the caller's context to handle it, so if we don't do the 1557 // notify here, we'll drop it on the floor. 1558 __ notify_method_exit(true/*native method*/, 1559 ilgl /*illegal state (not used for native methods)*/, 1560 InterpreterMacroAssembler::NotifyJVMTI, 1561 false /*check_exceptions*/); 1562 1563 //============================================================================= 1564 // Handle exceptions 1565 1566 if (synchronized) { 1567 // Don't check for exceptions since we're still in the i2n frame. Do that 1568 // manually afterwards. 1569 unlock_method(false); 1570 } 1571 1572 // Reset active handles after returning from native. 1573 // thread->active_handles()->clear(); 1574 __ ld(active_handles, thread_(active_handles)); 1575 // TODO PPC port assert(4 == JNIHandleBlock::top_size_in_bytes(), "unexpected field size"); 1576 __ li(R0, 0); 1577 __ stw(R0, JNIHandleBlock::top_offset_in_bytes(), active_handles); 1578 1579 Label exception_return_sync_check_already_unlocked; 1580 __ ld(R0/*pending_exception*/, thread_(pending_exception)); 1581 __ cmpdi(CCR0, R0/*pending_exception*/, 0); 1582 __ bne(CCR0, exception_return_sync_check_already_unlocked); 1583 1584 //----------------------------------------------------------------------------- 1585 // No exception pending. 1586 1587 // Move native method result back into proper registers and return. 1588 // Invoke result handler (may unbox/promote). 1589 __ ld(R11_scratch1, 0, R1_SP); 1590 __ ld(R3_RET, _ijava_state_neg(lresult), R11_scratch1); 1591 __ lfd(F1_RET, _ijava_state_neg(fresult), R11_scratch1); 1592 __ call_stub(result_handler_addr); 1593 1594 __ merge_frames(/*top_frame_sp*/ R21_sender_SP, /*return_pc*/ R0, R11_scratch1, R12_scratch2); 1595 1596 // Must use the return pc which was loaded from the caller's frame 1597 // as the VM uses return-pc-patching for deoptimization. 1598 __ mtlr(R0); 1599 __ blr(); 1600 1601 //----------------------------------------------------------------------------- 1602 // An exception is pending. We call into the runtime only if the 1603 // caller was not interpreted. If it was interpreted the 1604 // interpreter will do the correct thing. If it isn't interpreted 1605 // (call stub/compiled code) we will change our return and continue. 1606 1607 BIND(exception_return_sync_check); 1608 1609 if (synchronized) { 1610 // Don't check for exceptions since we're still in the i2n frame. Do that 1611 // manually afterwards. 1612 unlock_method(false); 1613 } 1614 BIND(exception_return_sync_check_already_unlocked); 1615 1616 const Register return_pc = R31; 1617 1618 __ ld(return_pc, 0, R1_SP); 1619 __ ld(return_pc, _abi(lr), return_pc); 1620 1621 // Get the address of the exception handler. 1622 __ call_VM_leaf(CAST_FROM_FN_PTR(address, SharedRuntime::exception_handler_for_return_address), 1623 R16_thread, 1624 return_pc /* return pc */); 1625 __ merge_frames(/*top_frame_sp*/ R21_sender_SP, noreg, R11_scratch1, R12_scratch2); 1626 1627 // Load the PC of the the exception handler into LR. 1628 __ mtlr(R3_RET); 1629 1630 // Load exception into R3_ARG1 and clear pending exception in thread. 1631 __ ld(R3_ARG1/*exception*/, thread_(pending_exception)); 1632 __ li(R4_ARG2, 0); 1633 __ std(R4_ARG2, thread_(pending_exception)); 1634 1635 // Load the original return pc into R4_ARG2. 1636 __ mr(R4_ARG2/*issuing_pc*/, return_pc); 1637 1638 // Return to exception handler. 1639 __ blr(); 1640 1641 //============================================================================= 1642 // Counter overflow. 1643 1644 if (inc_counter) { 1645 // Handle invocation counter overflow. 1646 __ bind(invocation_counter_overflow); 1647 1648 generate_counter_overflow(continue_after_compile); 1649 } 1650 1651 return entry; 1652 } 1653 1654 // Generic interpreted method entry to (asm) interpreter. 1655 // 1656 address TemplateInterpreterGenerator::generate_normal_entry(bool synchronized) { 1657 bool inc_counter = UseCompiler || CountCompiledCalls || LogTouchedMethods; 1658 address entry = __ pc(); 1659 // Generate the code to allocate the interpreter stack frame. 1660 Register Rsize_of_parameters = R4_ARG2, // Written by generate_fixed_frame. 1661 Rsize_of_locals = R5_ARG3; // Written by generate_fixed_frame. 1662 1663 // Does also a stack check to assure this frame fits on the stack. 1664 generate_fixed_frame(false, Rsize_of_parameters, Rsize_of_locals); 1665 1666 // -------------------------------------------------------------------------- 1667 // Zero out non-parameter locals. 1668 // Note: *Always* zero out non-parameter locals as Sparc does. It's not 1669 // worth to ask the flag, just do it. 1670 Register Rslot_addr = R6_ARG4, 1671 Rnum = R7_ARG5; 1672 Label Lno_locals, Lzero_loop; 1673 1674 // Set up the zeroing loop. 1675 __ subf(Rnum, Rsize_of_parameters, Rsize_of_locals); 1676 __ subf(Rslot_addr, Rsize_of_parameters, R18_locals); 1677 __ srdi_(Rnum, Rnum, Interpreter::logStackElementSize); 1678 __ beq(CCR0, Lno_locals); 1679 __ li(R0, 0); 1680 __ mtctr(Rnum); 1681 1682 // The zero locals loop. 1683 __ bind(Lzero_loop); 1684 __ std(R0, 0, Rslot_addr); 1685 __ addi(Rslot_addr, Rslot_addr, -Interpreter::stackElementSize); 1686 __ bdnz(Lzero_loop); 1687 1688 __ bind(Lno_locals); 1689 1690 // -------------------------------------------------------------------------- 1691 // Counter increment and overflow check. 1692 Label invocation_counter_overflow, 1693 profile_method, 1694 profile_method_continue; 1695 if (inc_counter || ProfileInterpreter) { 1696 1697 Register Rdo_not_unlock_if_synchronized_addr = R11_scratch1; 1698 if (synchronized) { 1699 // Since at this point in the method invocation the exception handler 1700 // would try to exit the monitor of synchronized methods which hasn't 1701 // been entered yet, we set the thread local variable 1702 // _do_not_unlock_if_synchronized to true. If any exception was thrown by 1703 // runtime, exception handling i.e. unlock_if_synchronized_method will 1704 // check this thread local flag. 1705 // This flag has two effects, one is to force an unwind in the topmost 1706 // interpreter frame and not perform an unlock while doing so. 1707 __ li(R0, 1); 1708 __ stb(R0, in_bytes(JavaThread::do_not_unlock_if_synchronized_offset()), R16_thread); 1709 } 1710 1711 // Argument and return type profiling. 1712 __ profile_parameters_type(R3_ARG1, R4_ARG2, R5_ARG3, R6_ARG4); 1713 1714 // Increment invocation counter and check for overflow. 1715 if (inc_counter) { 1716 generate_counter_incr(&invocation_counter_overflow, &profile_method, &profile_method_continue); 1717 } 1718 1719 __ bind(profile_method_continue); 1720 } 1721 1722 bang_stack_shadow_pages(false); 1723 1724 if (inc_counter || ProfileInterpreter) { 1725 // Reset the _do_not_unlock_if_synchronized flag. 1726 if (synchronized) { 1727 __ li(R0, 0); 1728 __ stb(R0, in_bytes(JavaThread::do_not_unlock_if_synchronized_offset()), R16_thread); 1729 } 1730 } 1731 1732 // -------------------------------------------------------------------------- 1733 // Locking of synchronized methods. Must happen AFTER invocation_counter 1734 // check and stack overflow check, so method is not locked if overflows. 1735 if (synchronized) { 1736 lock_method(R3_ARG1, R4_ARG2, R5_ARG3); 1737 } 1738 #ifdef ASSERT 1739 else { 1740 Label Lok; 1741 __ lwz(R0, in_bytes(Method::access_flags_offset()), R19_method); 1742 __ andi_(R0, R0, JVM_ACC_SYNCHRONIZED); 1743 __ asm_assert_eq("method needs synchronization", 0x8521); 1744 __ bind(Lok); 1745 } 1746 #endif // ASSERT 1747 1748 __ verify_thread(); 1749 1750 // -------------------------------------------------------------------------- 1751 // JVMTI support 1752 __ notify_method_entry(); 1753 1754 // -------------------------------------------------------------------------- 1755 // Start executing instructions. 1756 __ dispatch_next(vtos); 1757 1758 // -------------------------------------------------------------------------- 1759 // Out of line counter overflow and MDO creation code. 1760 if (ProfileInterpreter) { 1761 // We have decided to profile this method in the interpreter. 1762 __ bind(profile_method); 1763 __ call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::profile_method)); 1764 __ set_method_data_pointer_for_bcp(); 1765 __ b(profile_method_continue); 1766 } 1767 1768 if (inc_counter) { 1769 // Handle invocation counter overflow. 1770 __ bind(invocation_counter_overflow); 1771 generate_counter_overflow(profile_method_continue); 1772 } 1773 return entry; 1774 } 1775 1776 // CRC32 Intrinsics. 1777 // 1778 // Contract on scratch and work registers. 1779 // ======================================= 1780 // 1781 // On ppc, the register set {R2..R12} is available in the interpreter as scratch/work registers. 1782 // You should, however, keep in mind that {R3_ARG1..R10_ARG8} is the C-ABI argument register set. 1783 // You can't rely on these registers across calls. 1784 // 1785 // The generators for CRC32_update and for CRC32_updateBytes use the 1786 // scratch/work register set internally, passing the work registers 1787 // as arguments to the MacroAssembler emitters as required. 1788 // 1789 // R3_ARG1..R6_ARG4 are preset to hold the incoming java arguments. 1790 // Their contents is not constant but may change according to the requirements 1791 // of the emitted code. 1792 // 1793 // All other registers from the scratch/work register set are used "internally" 1794 // and contain garbage (i.e. unpredictable values) once blr() is reached. 1795 // Basically, only R3_RET contains a defined value which is the function result. 1796 // 1797 /** 1798 * Method entry for static native methods: 1799 * int java.util.zip.CRC32.update(int crc, int b) 1800 */ 1801 address TemplateInterpreterGenerator::generate_CRC32_update_entry() { 1802 if (UseCRC32Intrinsics) { 1803 address start = __ pc(); // Remember stub start address (is rtn value). 1804 Label slow_path; 1805 1806 // Safepoint check 1807 const Register sync_state = R11_scratch1; 1808 int sync_state_offs = __ load_const_optimized(sync_state, SafepointSynchronize::address_of_state(), /*temp*/R0, true); 1809 __ lwz(sync_state, sync_state_offs, sync_state); 1810 __ cmpwi(CCR0, sync_state, SafepointSynchronize::_not_synchronized); 1811 __ bne(CCR0, slow_path); 1812 1813 // We don't generate local frame and don't align stack because 1814 // we not even call stub code (we generate the code inline) 1815 // and there is no safepoint on this path. 1816 1817 // Load java parameters. 1818 // R15_esp is callers operand stack pointer, i.e. it points to the parameters. 1819 const Register argP = R15_esp; 1820 const Register crc = R3_ARG1; // crc value 1821 const Register data = R4_ARG2; // address of java byte value (kernel_crc32 needs address) 1822 const Register dataLen = R5_ARG3; // source data len (1 byte). Not used because calling the single-byte emitter. 1823 const Register table = R6_ARG4; // address of crc32 table 1824 const Register tmp = dataLen; // Reuse unused len register to show we don't actually need a separate tmp here. 1825 1826 BLOCK_COMMENT("CRC32_update {"); 1827 1828 // Arguments are reversed on java expression stack 1829 #ifdef VM_LITTLE_ENDIAN 1830 __ addi(data, argP, 0+1*wordSize); // (stack) address of byte value. Emitter expects address, not value. 1831 // Being passed as an int, the single byte is at offset +0. 1832 #else 1833 __ addi(data, argP, 3+1*wordSize); // (stack) address of byte value. Emitter expects address, not value. 1834 // Being passed from java as an int, the single byte is at offset +3. 1835 #endif 1836 __ lwz(crc, 2*wordSize, argP); // Current crc state, zero extend to 64 bit to have a clean register. 1837 1838 StubRoutines::ppc64::generate_load_crc_table_addr(_masm, table); 1839 __ kernel_crc32_singleByte(crc, data, dataLen, table, tmp); 1840 1841 // Restore caller sp for c2i case and return. 1842 __ mr(R1_SP, R21_sender_SP); // Cut the stack back to where the caller started. 1843 __ blr(); 1844 1845 // Generate a vanilla native entry as the slow path. 1846 BLOCK_COMMENT("} CRC32_update"); 1847 BIND(slow_path); 1848 __ jump_to_entry(Interpreter::entry_for_kind(Interpreter::native), R11_scratch1); 1849 return start; 1850 } 1851 1852 return NULL; 1853 } 1854 1855 // CRC32 Intrinsics. 1856 /** 1857 * Method entry for static native methods: 1858 * int java.util.zip.CRC32.updateBytes( int crc, byte[] b, int off, int len) 1859 * int java.util.zip.CRC32.updateByteBuffer(int crc, long* buf, int off, int len) 1860 */ 1861 address TemplateInterpreterGenerator::generate_CRC32_updateBytes_entry(AbstractInterpreter::MethodKind kind) { 1862 if (UseCRC32Intrinsics) { 1863 address start = __ pc(); // Remember stub start address (is rtn value). 1864 Label slow_path; 1865 1866 // Safepoint check 1867 const Register sync_state = R11_scratch1; 1868 int sync_state_offs = __ load_const_optimized(sync_state, SafepointSynchronize::address_of_state(), /*temp*/R0, true); 1869 __ lwz(sync_state, sync_state_offs, sync_state); 1870 __ cmpwi(CCR0, sync_state, SafepointSynchronize::_not_synchronized); 1871 __ bne(CCR0, slow_path); 1872 1873 // We don't generate local frame and don't align stack because 1874 // we not even call stub code (we generate the code inline) 1875 // and there is no safepoint on this path. 1876 1877 // Load parameters. 1878 // Z_esp is callers operand stack pointer, i.e. it points to the parameters. 1879 const Register argP = R15_esp; 1880 const Register crc = R3_ARG1; // crc value 1881 const Register data = R4_ARG2; // address of java byte array 1882 const Register dataLen = R5_ARG3; // source data len 1883 const Register table = R6_ARG4; // address of crc32 table 1884 1885 const Register t0 = R9; // scratch registers for crc calculation 1886 const Register t1 = R10; 1887 const Register t2 = R11; 1888 const Register t3 = R12; 1889 1890 const Register tc0 = R2; // registers to hold pre-calculated column addresses 1891 const Register tc1 = R7; 1892 const Register tc2 = R8; 1893 const Register tc3 = table; // table address is reconstructed at the end of kernel_crc32_* emitters 1894 1895 const Register tmp = t0; // Only used very locally to calculate byte buffer address. 1896 1897 // Arguments are reversed on java expression stack. 1898 // Calculate address of start element. 1899 if (kind == Interpreter::java_util_zip_CRC32_updateByteBuffer) { // Used for "updateByteBuffer direct". 1900 BLOCK_COMMENT("CRC32_updateByteBuffer {"); 1901 // crc @ (SP + 5W) (32bit) 1902 // buf @ (SP + 3W) (64bit ptr to long array) 1903 // off @ (SP + 2W) (32bit) 1904 // dataLen @ (SP + 1W) (32bit) 1905 // data = buf + off 1906 __ ld( data, 3*wordSize, argP); // start of byte buffer 1907 __ lwa( tmp, 2*wordSize, argP); // byte buffer offset 1908 __ lwa( dataLen, 1*wordSize, argP); // #bytes to process 1909 __ lwz( crc, 5*wordSize, argP); // current crc state 1910 __ add( data, data, tmp); // Add byte buffer offset. 1911 } else { // Used for "updateBytes update". 1912 BLOCK_COMMENT("CRC32_updateBytes {"); 1913 // crc @ (SP + 4W) (32bit) 1914 // buf @ (SP + 3W) (64bit ptr to byte array) 1915 // off @ (SP + 2W) (32bit) 1916 // dataLen @ (SP + 1W) (32bit) 1917 // data = buf + off + base_offset 1918 __ ld( data, 3*wordSize, argP); // start of byte buffer 1919 __ lwa( tmp, 2*wordSize, argP); // byte buffer offset 1920 __ lwa( dataLen, 1*wordSize, argP); // #bytes to process 1921 __ add( data, data, tmp); // add byte buffer offset 1922 __ lwz( crc, 4*wordSize, argP); // current crc state 1923 __ addi(data, data, arrayOopDesc::base_offset_in_bytes(T_BYTE)); 1924 } 1925 1926 StubRoutines::ppc64::generate_load_crc_table_addr(_masm, table); 1927 1928 // Performance measurements show the 1word and 2word variants to be almost equivalent, 1929 // with very light advantages for the 1word variant. We chose the 1word variant for 1930 // code compactness. 1931 __ kernel_crc32_1word(crc, data, dataLen, table, t0, t1, t2, t3, tc0, tc1, tc2, tc3); 1932 1933 // Restore caller sp for c2i case and return. 1934 __ mr(R1_SP, R21_sender_SP); // Cut the stack back to where the caller started. 1935 __ blr(); 1936 1937 // Generate a vanilla native entry as the slow path. 1938 BLOCK_COMMENT("} CRC32_updateBytes(Buffer)"); 1939 BIND(slow_path); 1940 __ jump_to_entry(Interpreter::entry_for_kind(Interpreter::native), R11_scratch1); 1941 return start; 1942 } 1943 1944 return NULL; 1945 } 1946 1947 // Not supported 1948 address TemplateInterpreterGenerator::generate_CRC32C_updateBytes_entry(AbstractInterpreter::MethodKind kind) { 1949 return NULL; 1950 } 1951 1952 // ============================================================================= 1953 // Exceptions 1954 1955 void TemplateInterpreterGenerator::generate_throw_exception() { 1956 Register Rexception = R17_tos, 1957 Rcontinuation = R3_RET; 1958 1959 // -------------------------------------------------------------------------- 1960 // Entry point if an method returns with a pending exception (rethrow). 1961 Interpreter::_rethrow_exception_entry = __ pc(); 1962 { 1963 __ restore_interpreter_state(R11_scratch1); // Sets R11_scratch1 = fp. 1964 __ ld(R12_scratch2, _ijava_state_neg(top_frame_sp), R11_scratch1); 1965 __ resize_frame_absolute(R12_scratch2, R11_scratch1, R0); 1966 1967 // Compiled code destroys templateTableBase, reload. 1968 __ load_const_optimized(R25_templateTableBase, (address)Interpreter::dispatch_table((TosState)0), R11_scratch1); 1969 } 1970 1971 // Entry point if a interpreted method throws an exception (throw). 1972 Interpreter::_throw_exception_entry = __ pc(); 1973 { 1974 __ mr(Rexception, R3_RET); 1975 1976 __ verify_thread(); 1977 __ verify_oop(Rexception); 1978 1979 // Expression stack must be empty before entering the VM in case of an exception. 1980 __ empty_expression_stack(); 1981 // Find exception handler address and preserve exception oop. 1982 // Call C routine to find handler and jump to it. 1983 __ call_VM(Rexception, CAST_FROM_FN_PTR(address, InterpreterRuntime::exception_handler_for_exception), Rexception); 1984 __ mtctr(Rcontinuation); 1985 // Push exception for exception handler bytecodes. 1986 __ push_ptr(Rexception); 1987 1988 // Jump to exception handler (may be remove activation entry!). 1989 __ bctr(); 1990 } 1991 1992 // If the exception is not handled in the current frame the frame is 1993 // removed and the exception is rethrown (i.e. exception 1994 // continuation is _rethrow_exception). 1995 // 1996 // Note: At this point the bci is still the bxi for the instruction 1997 // which caused the exception and the expression stack is 1998 // empty. Thus, for any VM calls at this point, GC will find a legal 1999 // oop map (with empty expression stack). 2000 2001 // In current activation 2002 // tos: exception 2003 // bcp: exception bcp 2004 2005 // -------------------------------------------------------------------------- 2006 // JVMTI PopFrame support 2007 2008 Interpreter::_remove_activation_preserving_args_entry = __ pc(); 2009 { 2010 // Set the popframe_processing bit in popframe_condition indicating that we are 2011 // currently handling popframe, so that call_VMs that may happen later do not 2012 // trigger new popframe handling cycles. 2013 __ lwz(R11_scratch1, in_bytes(JavaThread::popframe_condition_offset()), R16_thread); 2014 __ ori(R11_scratch1, R11_scratch1, JavaThread::popframe_processing_bit); 2015 __ stw(R11_scratch1, in_bytes(JavaThread::popframe_condition_offset()), R16_thread); 2016 2017 // Empty the expression stack, as in normal exception handling. 2018 __ empty_expression_stack(); 2019 __ unlock_if_synchronized_method(vtos, /* throw_monitor_exception */ false, /* install_monitor_exception */ false); 2020 2021 // Check to see whether we are returning to a deoptimized frame. 2022 // (The PopFrame call ensures that the caller of the popped frame is 2023 // either interpreted or compiled and deoptimizes it if compiled.) 2024 // Note that we don't compare the return PC against the 2025 // deoptimization blob's unpack entry because of the presence of 2026 // adapter frames in C2. 2027 Label Lcaller_not_deoptimized; 2028 Register return_pc = R3_ARG1; 2029 __ ld(return_pc, 0, R1_SP); 2030 __ ld(return_pc, _abi(lr), return_pc); 2031 __ call_VM_leaf(CAST_FROM_FN_PTR(address, InterpreterRuntime::interpreter_contains), return_pc); 2032 __ cmpdi(CCR0, R3_RET, 0); 2033 __ bne(CCR0, Lcaller_not_deoptimized); 2034 2035 // The deoptimized case. 2036 // In this case, we can't call dispatch_next() after the frame is 2037 // popped, but instead must save the incoming arguments and restore 2038 // them after deoptimization has occurred. 2039 __ ld(R4_ARG2, in_bytes(Method::const_offset()), R19_method); 2040 __ lhz(R4_ARG2 /* number of params */, in_bytes(ConstMethod::size_of_parameters_offset()), R4_ARG2); 2041 __ slwi(R4_ARG2, R4_ARG2, Interpreter::logStackElementSize); 2042 __ addi(R5_ARG3, R18_locals, Interpreter::stackElementSize); 2043 __ subf(R5_ARG3, R4_ARG2, R5_ARG3); 2044 // Save these arguments. 2045 __ call_VM_leaf(CAST_FROM_FN_PTR(address, Deoptimization::popframe_preserve_args), R16_thread, R4_ARG2, R5_ARG3); 2046 2047 // Inform deoptimization that it is responsible for restoring these arguments. 2048 __ load_const_optimized(R11_scratch1, JavaThread::popframe_force_deopt_reexecution_bit); 2049 __ stw(R11_scratch1, in_bytes(JavaThread::popframe_condition_offset()), R16_thread); 2050 2051 // Return from the current method into the deoptimization blob. Will eventually 2052 // end up in the deopt interpeter entry, deoptimization prepared everything that 2053 // we will reexecute the call that called us. 2054 __ merge_frames(/*top_frame_sp*/ R21_sender_SP, /*reload return_pc*/ return_pc, R11_scratch1, R12_scratch2); 2055 __ mtlr(return_pc); 2056 __ blr(); 2057 2058 // The non-deoptimized case. 2059 __ bind(Lcaller_not_deoptimized); 2060 2061 // Clear the popframe condition flag. 2062 __ li(R0, 0); 2063 __ stw(R0, in_bytes(JavaThread::popframe_condition_offset()), R16_thread); 2064 2065 // Get out of the current method and re-execute the call that called us. 2066 __ merge_frames(/*top_frame_sp*/ R21_sender_SP, /*return_pc*/ noreg, R11_scratch1, R12_scratch2); 2067 __ restore_interpreter_state(R11_scratch1); 2068 __ ld(R12_scratch2, _ijava_state_neg(top_frame_sp), R11_scratch1); 2069 __ resize_frame_absolute(R12_scratch2, R11_scratch1, R0); 2070 if (ProfileInterpreter) { 2071 __ set_method_data_pointer_for_bcp(); 2072 __ ld(R11_scratch1, 0, R1_SP); 2073 __ std(R28_mdx, _ijava_state_neg(mdx), R11_scratch1); 2074 } 2075 #if INCLUDE_JVMTI 2076 Label L_done; 2077 2078 __ lbz(R11_scratch1, 0, R14_bcp); 2079 __ cmpwi(CCR0, R11_scratch1, Bytecodes::_invokestatic); 2080 __ bne(CCR0, L_done); 2081 2082 // The member name argument must be restored if _invokestatic is re-executed after a PopFrame call. 2083 // Detect such a case in the InterpreterRuntime function and return the member name argument, or NULL. 2084 __ ld(R4_ARG2, 0, R18_locals); 2085 __ MacroAssembler::call_VM(R4_ARG2, CAST_FROM_FN_PTR(address, InterpreterRuntime::member_name_arg_or_null), R4_ARG2, R19_method, R14_bcp, false); 2086 __ restore_interpreter_state(R11_scratch1, /*bcp_and_mdx_only*/ true); 2087 __ cmpdi(CCR0, R4_ARG2, 0); 2088 __ beq(CCR0, L_done); 2089 __ std(R4_ARG2, wordSize, R15_esp); 2090 __ bind(L_done); 2091 #endif // INCLUDE_JVMTI 2092 __ dispatch_next(vtos); 2093 } 2094 // end of JVMTI PopFrame support 2095 2096 // -------------------------------------------------------------------------- 2097 // Remove activation exception entry. 2098 // This is jumped to if an interpreted method can't handle an exception itself 2099 // (we come from the throw/rethrow exception entry above). We're going to call 2100 // into the VM to find the exception handler in the caller, pop the current 2101 // frame and return the handler we calculated. 2102 Interpreter::_remove_activation_entry = __ pc(); 2103 { 2104 __ pop_ptr(Rexception); 2105 __ verify_thread(); 2106 __ verify_oop(Rexception); 2107 __ std(Rexception, in_bytes(JavaThread::vm_result_offset()), R16_thread); 2108 2109 __ unlock_if_synchronized_method(vtos, /* throw_monitor_exception */ false, true); 2110 __ notify_method_exit(false, vtos, InterpreterMacroAssembler::SkipNotifyJVMTI, false); 2111 2112 __ get_vm_result(Rexception); 2113 2114 // We are done with this activation frame; find out where to go next. 2115 // The continuation point will be an exception handler, which expects 2116 // the following registers set up: 2117 // 2118 // RET: exception oop 2119 // ARG2: Issuing PC (see generate_exception_blob()), only used if the caller is compiled. 2120 2121 Register return_pc = R31; // Needs to survive the runtime call. 2122 __ ld(return_pc, 0, R1_SP); 2123 __ ld(return_pc, _abi(lr), return_pc); 2124 __ call_VM_leaf(CAST_FROM_FN_PTR(address, SharedRuntime::exception_handler_for_return_address), R16_thread, return_pc); 2125 2126 // Remove the current activation. 2127 __ merge_frames(/*top_frame_sp*/ R21_sender_SP, /*return_pc*/ noreg, R11_scratch1, R12_scratch2); 2128 2129 __ mr(R4_ARG2, return_pc); 2130 __ mtlr(R3_RET); 2131 __ mr(R3_RET, Rexception); 2132 __ blr(); 2133 } 2134 } 2135 2136 // JVMTI ForceEarlyReturn support. 2137 // Returns "in the middle" of a method with a "fake" return value. 2138 address TemplateInterpreterGenerator::generate_earlyret_entry_for(TosState state) { 2139 2140 Register Rscratch1 = R11_scratch1, 2141 Rscratch2 = R12_scratch2; 2142 2143 address entry = __ pc(); 2144 __ empty_expression_stack(); 2145 2146 __ load_earlyret_value(state, Rscratch1); 2147 2148 __ ld(Rscratch1, in_bytes(JavaThread::jvmti_thread_state_offset()), R16_thread); 2149 // Clear the earlyret state. 2150 __ li(R0, 0); 2151 __ stw(R0, in_bytes(JvmtiThreadState::earlyret_state_offset()), Rscratch1); 2152 2153 __ remove_activation(state, false, false); 2154 // Copied from TemplateTable::_return. 2155 // Restoration of lr done by remove_activation. 2156 switch (state) { 2157 // Narrow result if state is itos but result type is smaller. 2158 case itos: __ narrow(R17_tos); /* fall through */ 2159 case ltos: 2160 case btos: 2161 case ztos: 2162 case ctos: 2163 case stos: 2164 case atos: __ mr(R3_RET, R17_tos); break; 2165 case ftos: 2166 case dtos: __ fmr(F1_RET, F15_ftos); break; 2167 case vtos: // This might be a constructor. Final fields (and volatile fields on PPC64) need 2168 // to get visible before the reference to the object gets stored anywhere. 2169 __ membar(Assembler::StoreStore); break; 2170 default : ShouldNotReachHere(); 2171 } 2172 __ blr(); 2173 2174 return entry; 2175 } // end of ForceEarlyReturn support 2176 2177 //----------------------------------------------------------------------------- 2178 // Helper for vtos entry point generation 2179 2180 void TemplateInterpreterGenerator::set_vtos_entry_points(Template* t, 2181 address& bep, 2182 address& cep, 2183 address& sep, 2184 address& aep, 2185 address& iep, 2186 address& lep, 2187 address& fep, 2188 address& dep, 2189 address& vep) { 2190 assert(t->is_valid() && t->tos_in() == vtos, "illegal template"); 2191 Label L; 2192 2193 aep = __ pc(); __ push_ptr(); __ b(L); 2194 fep = __ pc(); __ push_f(); __ b(L); 2195 dep = __ pc(); __ push_d(); __ b(L); 2196 lep = __ pc(); __ push_l(); __ b(L); 2197 __ align(32, 12, 24); // align L 2198 bep = cep = sep = 2199 iep = __ pc(); __ push_i(); 2200 vep = __ pc(); 2201 __ bind(L); 2202 generate_and_dispatch(t); 2203 } 2204 2205 //----------------------------------------------------------------------------- 2206 2207 // Non-product code 2208 #ifndef PRODUCT 2209 address TemplateInterpreterGenerator::generate_trace_code(TosState state) { 2210 //__ flush_bundle(); 2211 address entry = __ pc(); 2212 2213 const char *bname = NULL; 2214 uint tsize = 0; 2215 switch(state) { 2216 case ftos: 2217 bname = "trace_code_ftos {"; 2218 tsize = 2; 2219 break; 2220 case btos: 2221 bname = "trace_code_btos {"; 2222 tsize = 2; 2223 break; 2224 case ztos: 2225 bname = "trace_code_ztos {"; 2226 tsize = 2; 2227 break; 2228 case ctos: 2229 bname = "trace_code_ctos {"; 2230 tsize = 2; 2231 break; 2232 case stos: 2233 bname = "trace_code_stos {"; 2234 tsize = 2; 2235 break; 2236 case itos: 2237 bname = "trace_code_itos {"; 2238 tsize = 2; 2239 break; 2240 case ltos: 2241 bname = "trace_code_ltos {"; 2242 tsize = 3; 2243 break; 2244 case atos: 2245 bname = "trace_code_atos {"; 2246 tsize = 2; 2247 break; 2248 case vtos: 2249 // Note: In case of vtos, the topmost of stack value could be a int or doubl 2250 // In case of a double (2 slots) we won't see the 2nd stack value. 2251 // Maybe we simply should print the topmost 3 stack slots to cope with the problem. 2252 bname = "trace_code_vtos {"; 2253 tsize = 2; 2254 2255 break; 2256 case dtos: 2257 bname = "trace_code_dtos {"; 2258 tsize = 3; 2259 break; 2260 default: 2261 ShouldNotReachHere(); 2262 } 2263 BLOCK_COMMENT(bname); 2264 2265 // Support short-cut for TraceBytecodesAt. 2266 // Don't call into the VM if we don't want to trace to speed up things. 2267 Label Lskip_vm_call; 2268 if (TraceBytecodesAt > 0 && TraceBytecodesAt < max_intx) { 2269 int offs1 = __ load_const_optimized(R11_scratch1, (address) &TraceBytecodesAt, R0, true); 2270 int offs2 = __ load_const_optimized(R12_scratch2, (address) &BytecodeCounter::_counter_value, R0, true); 2271 __ ld(R11_scratch1, offs1, R11_scratch1); 2272 __ lwa(R12_scratch2, offs2, R12_scratch2); 2273 __ cmpd(CCR0, R12_scratch2, R11_scratch1); 2274 __ blt(CCR0, Lskip_vm_call); 2275 } 2276 2277 __ push(state); 2278 // Load 2 topmost expression stack values. 2279 __ ld(R6_ARG4, tsize*Interpreter::stackElementSize, R15_esp); 2280 __ ld(R5_ARG3, Interpreter::stackElementSize, R15_esp); 2281 __ mflr(R31); 2282 __ call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::trace_bytecode), /* unused */ R4_ARG2, R5_ARG3, R6_ARG4, false); 2283 __ mtlr(R31); 2284 __ pop(state); 2285 2286 if (TraceBytecodesAt > 0 && TraceBytecodesAt < max_intx) { 2287 __ bind(Lskip_vm_call); 2288 } 2289 __ blr(); 2290 BLOCK_COMMENT("} trace_code"); 2291 return entry; 2292 } 2293 2294 void TemplateInterpreterGenerator::count_bytecode() { 2295 int offs = __ load_const_optimized(R11_scratch1, (address) &BytecodeCounter::_counter_value, R12_scratch2, true); 2296 __ lwz(R12_scratch2, offs, R11_scratch1); 2297 __ addi(R12_scratch2, R12_scratch2, 1); 2298 __ stw(R12_scratch2, offs, R11_scratch1); 2299 } 2300 2301 void TemplateInterpreterGenerator::histogram_bytecode(Template* t) { 2302 int offs = __ load_const_optimized(R11_scratch1, (address) &BytecodeHistogram::_counters[t->bytecode()], R12_scratch2, true); 2303 __ lwz(R12_scratch2, offs, R11_scratch1); 2304 __ addi(R12_scratch2, R12_scratch2, 1); 2305 __ stw(R12_scratch2, offs, R11_scratch1); 2306 } 2307 2308 void TemplateInterpreterGenerator::histogram_bytecode_pair(Template* t) { 2309 const Register addr = R11_scratch1, 2310 tmp = R12_scratch2; 2311 // Get index, shift out old bytecode, bring in new bytecode, and store it. 2312 // _index = (_index >> log2_number_of_codes) | 2313 // (bytecode << log2_number_of_codes); 2314 int offs1 = __ load_const_optimized(addr, (address)&BytecodePairHistogram::_index, tmp, true); 2315 __ lwz(tmp, offs1, addr); 2316 __ srwi(tmp, tmp, BytecodePairHistogram::log2_number_of_codes); 2317 __ ori(tmp, tmp, ((int) t->bytecode()) << BytecodePairHistogram::log2_number_of_codes); 2318 __ stw(tmp, offs1, addr); 2319 2320 // Bump bucket contents. 2321 // _counters[_index] ++; 2322 int offs2 = __ load_const_optimized(addr, (address)&BytecodePairHistogram::_counters, R0, true); 2323 __ sldi(tmp, tmp, LogBytesPerInt); 2324 __ add(addr, tmp, addr); 2325 __ lwz(tmp, offs2, addr); 2326 __ addi(tmp, tmp, 1); 2327 __ stw(tmp, offs2, addr); 2328 } 2329 2330 void TemplateInterpreterGenerator::trace_bytecode(Template* t) { 2331 // Call a little run-time stub to avoid blow-up for each bytecode. 2332 // The run-time runtime saves the right registers, depending on 2333 // the tosca in-state for the given template. 2334 2335 assert(Interpreter::trace_code(t->tos_in()) != NULL, 2336 "entry must have been generated"); 2337 2338 // Note: we destroy LR here. 2339 __ bl(Interpreter::trace_code(t->tos_in())); 2340 } 2341 2342 void TemplateInterpreterGenerator::stop_interpreter_at() { 2343 Label L; 2344 int offs1 = __ load_const_optimized(R11_scratch1, (address) &StopInterpreterAt, R0, true); 2345 int offs2 = __ load_const_optimized(R12_scratch2, (address) &BytecodeCounter::_counter_value, R0, true); 2346 __ ld(R11_scratch1, offs1, R11_scratch1); 2347 __ lwa(R12_scratch2, offs2, R12_scratch2); 2348 __ cmpd(CCR0, R12_scratch2, R11_scratch1); 2349 __ bne(CCR0, L); 2350 __ illtrap(); 2351 __ bind(L); 2352 } 2353 2354 #endif // !PRODUCT