1 /*
2 * Copyright (c) 2016, Oracle and/or its affiliates. All rights reserved.
3 * Copyright (c) 2016 SAP SE. All rights reserved.
4 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
5 *
6 * This code is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License version 2 only, as
8 * published by the Free Software Foundation.
9 *
10 * This code is distributed in the hope that it will be useful, but WITHOUT
11 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
13 * version 2 for more details (a copy is included in the LICENSE file that
14 * accompanied this code).
15 *
16 * You should have received a copy of the GNU General Public License version
17 * 2 along with this work; if not, write to the Free Software Foundation,
18 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
19 *
20 * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
21 * or visit www.oracle.com if you need additional information or have any
22 * questions.
23 *
24 */
25
26 #include "precompiled.hpp"
27 #include "asm/codeBuffer.hpp"
28 #include "asm/macroAssembler.inline.hpp"
29 #include "compiler/disassembler.hpp"
30 #include "gc/shared/collectedHeap.inline.hpp"
31 #include "interpreter/interpreter.hpp"
32 #include "gc/shared/cardTableModRefBS.hpp"
33 #include "memory/resourceArea.hpp"
34 #include "memory/universe.hpp"
35 #include "oops/klass.inline.hpp"
36 #include "opto/compile.hpp"
37 #include "opto/intrinsicnode.hpp"
38 #include "opto/matcher.hpp"
39 #include "prims/methodHandles.hpp"
40 #include "registerSaver_s390.hpp"
41 #include "runtime/biasedLocking.hpp"
42 #include "runtime/icache.hpp"
43 #include "runtime/interfaceSupport.hpp"
44 #include "runtime/objectMonitor.hpp"
45 #include "runtime/os.hpp"
46 #include "runtime/sharedRuntime.hpp"
47 #include "runtime/stubRoutines.hpp"
48 #include "utilities/events.hpp"
49 #include "utilities/macros.hpp"
50 #if INCLUDE_ALL_GCS
51 #include "gc/g1/g1CollectedHeap.inline.hpp"
52 #include "gc/g1/g1SATBCardTableModRefBS.hpp"
53 #include "gc/g1/heapRegion.hpp"
54 #endif
55
56 #include <ucontext.h>
57
58 #define BLOCK_COMMENT(str) block_comment(str)
59 #define BIND(label) bind(label); BLOCK_COMMENT(#label ":")
60
61 // Move 32-bit register if destination and source are different.
62 void MacroAssembler::lr_if_needed(Register rd, Register rs) {
63 if (rs != rd) { z_lr(rd, rs); }
64 }
65
66 // Move register if destination and source are different.
67 void MacroAssembler::lgr_if_needed(Register rd, Register rs) {
68 if (rs != rd) { z_lgr(rd, rs); }
69 }
70
71 // Zero-extend 32-bit register into 64-bit register if destination and source are different.
72 void MacroAssembler::llgfr_if_needed(Register rd, Register rs) {
73 if (rs != rd) { z_llgfr(rd, rs); }
74 }
75
76 // Move float register if destination and source are different.
77 void MacroAssembler::ldr_if_needed(FloatRegister rd, FloatRegister rs) {
78 if (rs != rd) { z_ldr(rd, rs); }
79 }
80
81 // Move integer register if destination and source are different.
82 // It is assumed that shorter-than-int types are already
83 // appropriately sign-extended.
84 void MacroAssembler::move_reg_if_needed(Register dst, BasicType dst_type, Register src,
85 BasicType src_type) {
86 assert((dst_type != T_FLOAT) && (dst_type != T_DOUBLE), "use move_freg for float types");
87 assert((src_type != T_FLOAT) && (src_type != T_DOUBLE), "use move_freg for float types");
88
89 if (dst_type == src_type) {
90 lgr_if_needed(dst, src); // Just move all 64 bits.
91 return;
92 }
93
94 switch (dst_type) {
95 // Do not support these types for now.
96 // case T_BOOLEAN:
97 case T_BYTE: // signed byte
98 switch (src_type) {
99 case T_INT:
100 z_lgbr(dst, src);
101 break;
102 default:
103 ShouldNotReachHere();
104 }
105 return;
106
107 case T_CHAR:
108 case T_SHORT:
109 switch (src_type) {
110 case T_INT:
111 if (dst_type == T_CHAR) {
112 z_llghr(dst, src);
113 } else {
114 z_lghr(dst, src);
115 }
116 break;
117 default:
118 ShouldNotReachHere();
119 }
120 return;
121
122 case T_INT:
123 switch (src_type) {
124 case T_BOOLEAN:
125 case T_BYTE:
126 case T_CHAR:
127 case T_SHORT:
128 case T_INT:
129 case T_LONG:
130 case T_OBJECT:
131 case T_ARRAY:
132 case T_VOID:
133 case T_ADDRESS:
134 lr_if_needed(dst, src);
135 // llgfr_if_needed(dst, src); // zero-extend (in case we need to find a bug).
136 return;
137
138 default:
139 assert(false, "non-integer src type");
140 return;
141 }
142 case T_LONG:
143 switch (src_type) {
144 case T_BOOLEAN:
145 case T_BYTE:
146 case T_CHAR:
147 case T_SHORT:
148 case T_INT:
149 z_lgfr(dst, src); // sign extension
150 return;
151
152 case T_LONG:
153 case T_OBJECT:
154 case T_ARRAY:
155 case T_VOID:
156 case T_ADDRESS:
157 lgr_if_needed(dst, src);
158 return;
159
160 default:
161 assert(false, "non-integer src type");
162 return;
163 }
164 return;
165 case T_OBJECT:
166 case T_ARRAY:
167 case T_VOID:
168 case T_ADDRESS:
169 switch (src_type) {
170 // These types don't make sense to be converted to pointers:
171 // case T_BOOLEAN:
172 // case T_BYTE:
173 // case T_CHAR:
174 // case T_SHORT:
175
176 case T_INT:
177 z_llgfr(dst, src); // zero extension
178 return;
179
180 case T_LONG:
181 case T_OBJECT:
182 case T_ARRAY:
183 case T_VOID:
184 case T_ADDRESS:
185 lgr_if_needed(dst, src);
186 return;
187
188 default:
189 assert(false, "non-integer src type");
190 return;
191 }
192 return;
193 default:
194 assert(false, "non-integer dst type");
195 return;
196 }
197 }
198
199 // Move float register if destination and source are different.
200 void MacroAssembler::move_freg_if_needed(FloatRegister dst, BasicType dst_type,
201 FloatRegister src, BasicType src_type) {
202 assert((dst_type == T_FLOAT) || (dst_type == T_DOUBLE), "use move_reg for int types");
203 assert((src_type == T_FLOAT) || (src_type == T_DOUBLE), "use move_reg for int types");
204 if (dst_type == src_type) {
205 ldr_if_needed(dst, src); // Just move all 64 bits.
206 } else {
207 switch (dst_type) {
208 case T_FLOAT:
209 assert(src_type == T_DOUBLE, "invalid float type combination");
210 z_ledbr(dst, src);
211 return;
212 case T_DOUBLE:
213 assert(src_type == T_FLOAT, "invalid float type combination");
214 z_ldebr(dst, src);
215 return;
216 default:
217 assert(false, "non-float dst type");
218 return;
219 }
220 }
221 }
222
223 // Optimized emitter for reg to mem operations.
224 // Uses modern instructions if running on modern hardware, classic instructions
225 // otherwise. Prefers (usually shorter) classic instructions if applicable.
226 // Data register (reg) cannot be used as work register.
227 //
228 // Don't rely on register locking, instead pass a scratch register (Z_R0 by default).
229 // CAUTION! Passing registers >= Z_R2 may produce bad results on old CPUs!
230 void MacroAssembler::freg2mem_opt(FloatRegister reg,
231 int64_t disp,
232 Register index,
233 Register base,
234 void (MacroAssembler::*modern) (FloatRegister, int64_t, Register, Register),
235 void (MacroAssembler::*classic)(FloatRegister, int64_t, Register, Register),
236 Register scratch) {
237 index = (index == noreg) ? Z_R0 : index;
238 if (Displacement::is_shortDisp(disp)) {
239 (this->*classic)(reg, disp, index, base);
240 } else {
241 if (Displacement::is_validDisp(disp)) {
242 (this->*modern)(reg, disp, index, base);
243 } else {
244 if (scratch != Z_R0 && scratch != Z_R1) {
245 (this->*modern)(reg, disp, index, base); // Will fail with disp out of range.
246 } else {
247 if (scratch != Z_R0) { // scratch == Z_R1
248 if ((scratch == index) || (index == base)) {
249 (this->*modern)(reg, disp, index, base); // Will fail with disp out of range.
250 } else {
251 add2reg(scratch, disp, base);
252 (this->*classic)(reg, 0, index, scratch);
253 if (base == scratch) {
254 add2reg(base, -disp); // Restore base.
255 }
256 }
257 } else { // scratch == Z_R0
258 z_lgr(scratch, base);
259 add2reg(base, disp);
260 (this->*classic)(reg, 0, index, base);
261 z_lgr(base, scratch); // Restore base.
262 }
263 }
264 }
265 }
266 }
267
268 void MacroAssembler::freg2mem_opt(FloatRegister reg, const Address &a, bool is_double) {
269 if (is_double) {
270 freg2mem_opt(reg, a.disp20(), a.indexOrR0(), a.baseOrR0(), MODERN_FFUN(z_stdy), CLASSIC_FFUN(z_std));
271 } else {
272 freg2mem_opt(reg, a.disp20(), a.indexOrR0(), a.baseOrR0(), MODERN_FFUN(z_stey), CLASSIC_FFUN(z_ste));
273 }
274 }
275
276 // Optimized emitter for mem to reg operations.
277 // Uses modern instructions if running on modern hardware, classic instructions
278 // otherwise. Prefers (usually shorter) classic instructions if applicable.
279 // data register (reg) cannot be used as work register.
280 //
281 // Don't rely on register locking, instead pass a scratch register (Z_R0 by default).
282 // CAUTION! Passing registers >= Z_R2 may produce bad results on old CPUs!
283 void MacroAssembler::mem2freg_opt(FloatRegister reg,
284 int64_t disp,
285 Register index,
286 Register base,
287 void (MacroAssembler::*modern) (FloatRegister, int64_t, Register, Register),
288 void (MacroAssembler::*classic)(FloatRegister, int64_t, Register, Register),
289 Register scratch) {
290 index = (index == noreg) ? Z_R0 : index;
291 if (Displacement::is_shortDisp(disp)) {
292 (this->*classic)(reg, disp, index, base);
293 } else {
294 if (Displacement::is_validDisp(disp)) {
295 (this->*modern)(reg, disp, index, base);
296 } else {
297 if (scratch != Z_R0 && scratch != Z_R1) {
298 (this->*modern)(reg, disp, index, base); // Will fail with disp out of range.
299 } else {
300 if (scratch != Z_R0) { // scratch == Z_R1
301 if ((scratch == index) || (index == base)) {
302 (this->*modern)(reg, disp, index, base); // Will fail with disp out of range.
303 } else {
304 add2reg(scratch, disp, base);
305 (this->*classic)(reg, 0, index, scratch);
306 if (base == scratch) {
307 add2reg(base, -disp); // Restore base.
308 }
309 }
310 } else { // scratch == Z_R0
311 z_lgr(scratch, base);
312 add2reg(base, disp);
313 (this->*classic)(reg, 0, index, base);
314 z_lgr(base, scratch); // Restore base.
315 }
316 }
317 }
318 }
319 }
320
321 void MacroAssembler::mem2freg_opt(FloatRegister reg, const Address &a, bool is_double) {
322 if (is_double) {
323 mem2freg_opt(reg, a.disp20(), a.indexOrR0(), a.baseOrR0(), MODERN_FFUN(z_ldy), CLASSIC_FFUN(z_ld));
324 } else {
325 mem2freg_opt(reg, a.disp20(), a.indexOrR0(), a.baseOrR0(), MODERN_FFUN(z_ley), CLASSIC_FFUN(z_le));
326 }
327 }
328
329 // Optimized emitter for reg to mem operations.
330 // Uses modern instructions if running on modern hardware, classic instructions
331 // otherwise. Prefers (usually shorter) classic instructions if applicable.
332 // Data register (reg) cannot be used as work register.
333 //
334 // Don't rely on register locking, instead pass a scratch register
335 // (Z_R0 by default)
336 // CAUTION! passing registers >= Z_R2 may produce bad results on old CPUs!
337 void MacroAssembler::reg2mem_opt(Register reg,
338 int64_t disp,
339 Register index,
340 Register base,
341 void (MacroAssembler::*modern) (Register, int64_t, Register, Register),
342 void (MacroAssembler::*classic)(Register, int64_t, Register, Register),
343 Register scratch) {
344 index = (index == noreg) ? Z_R0 : index;
345 if (Displacement::is_shortDisp(disp)) {
346 (this->*classic)(reg, disp, index, base);
347 } else {
348 if (Displacement::is_validDisp(disp)) {
349 (this->*modern)(reg, disp, index, base);
350 } else {
351 if (scratch != Z_R0 && scratch != Z_R1) {
352 (this->*modern)(reg, disp, index, base); // Will fail with disp out of range.
353 } else {
354 if (scratch != Z_R0) { // scratch == Z_R1
355 if ((scratch == index) || (index == base)) {
356 (this->*modern)(reg, disp, index, base); // Will fail with disp out of range.
357 } else {
358 add2reg(scratch, disp, base);
359 (this->*classic)(reg, 0, index, scratch);
360 if (base == scratch) {
361 add2reg(base, -disp); // Restore base.
362 }
363 }
364 } else { // scratch == Z_R0
365 if ((scratch == reg) || (scratch == base) || (reg == base)) {
366 (this->*modern)(reg, disp, index, base); // Will fail with disp out of range.
367 } else {
368 z_lgr(scratch, base);
369 add2reg(base, disp);
370 (this->*classic)(reg, 0, index, base);
371 z_lgr(base, scratch); // Restore base.
372 }
373 }
374 }
375 }
376 }
377 }
378
379 int MacroAssembler::reg2mem_opt(Register reg, const Address &a, bool is_double) {
380 int store_offset = offset();
381 if (is_double) {
382 reg2mem_opt(reg, a.disp20(), a.indexOrR0(), a.baseOrR0(), MODERN_IFUN(z_stg), CLASSIC_IFUN(z_stg));
383 } else {
384 reg2mem_opt(reg, a.disp20(), a.indexOrR0(), a.baseOrR0(), MODERN_IFUN(z_sty), CLASSIC_IFUN(z_st));
385 }
386 return store_offset;
387 }
388
389 // Optimized emitter for mem to reg operations.
390 // Uses modern instructions if running on modern hardware, classic instructions
391 // otherwise. Prefers (usually shorter) classic instructions if applicable.
392 // Data register (reg) will be used as work register where possible.
393 void MacroAssembler::mem2reg_opt(Register reg,
394 int64_t disp,
395 Register index,
396 Register base,
397 void (MacroAssembler::*modern) (Register, int64_t, Register, Register),
398 void (MacroAssembler::*classic)(Register, int64_t, Register, Register)) {
399 index = (index == noreg) ? Z_R0 : index;
400 if (Displacement::is_shortDisp(disp)) {
401 (this->*classic)(reg, disp, index, base);
402 } else {
403 if (Displacement::is_validDisp(disp)) {
404 (this->*modern)(reg, disp, index, base);
405 } else {
406 if ((reg == index) && (reg == base)) {
407 z_sllg(reg, reg, 1);
408 add2reg(reg, disp);
409 (this->*classic)(reg, 0, noreg, reg);
410 } else if ((reg == index) && (reg != Z_R0)) {
411 add2reg(reg, disp);
412 (this->*classic)(reg, 0, reg, base);
413 } else if (reg == base) {
414 add2reg(reg, disp);
415 (this->*classic)(reg, 0, index, reg);
416 } else if (reg != Z_R0) {
417 add2reg(reg, disp, base);
418 (this->*classic)(reg, 0, index, reg);
419 } else { // reg == Z_R0 && reg != base here
420 add2reg(base, disp);
421 (this->*classic)(reg, 0, index, base);
422 add2reg(base, -disp);
423 }
424 }
425 }
426 }
427
428 void MacroAssembler::mem2reg_opt(Register reg, const Address &a, bool is_double) {
429 if (is_double) {
430 z_lg(reg, a);
431 } else {
432 mem2reg_opt(reg, a.disp20(), a.indexOrR0(), a.baseOrR0(), MODERN_IFUN(z_ly), CLASSIC_IFUN(z_l));
433 }
434 }
435
436 void MacroAssembler::mem2reg_signed_opt(Register reg, const Address &a) {
437 mem2reg_opt(reg, a.disp20(), a.indexOrR0(), a.baseOrR0(), MODERN_IFUN(z_lgf), CLASSIC_IFUN(z_lgf));
438 }
439
440 void MacroAssembler::and_imm(Register r, long mask,
441 Register tmp /* = Z_R0 */,
442 bool wide /* = false */) {
443 assert(wide || Immediate::is_simm32(mask), "mask value too large");
444
445 if (!wide) {
446 z_nilf(r, mask);
447 return;
448 }
449
450 assert(r != tmp, " need a different temporary register !");
451 load_const_optimized(tmp, mask);
452 z_ngr(r, tmp);
453 }
454
455 // Calculate the 1's complement.
456 // Note: The condition code is neither preserved nor correctly set by this code!!!
457 // Note: (wide == false) does not protect the high order half of the target register
458 // from alteration. It only serves as optimization hint for 32-bit results.
459 void MacroAssembler::not_(Register r1, Register r2, bool wide) {
460
461 if ((r2 == noreg) || (r2 == r1)) { // Calc 1's complement in place.
462 z_xilf(r1, -1);
463 if (wide) {
464 z_xihf(r1, -1);
465 }
466 } else { // Distinct src and dst registers.
467 if (VM_Version::has_DistinctOpnds()) {
468 load_const_optimized(r1, -1);
469 z_xgrk(r1, r2, r1);
470 } else {
471 if (wide) {
472 z_lgr(r1, r2);
473 z_xilf(r1, -1);
474 z_xihf(r1, -1);
475 } else {
476 z_lr(r1, r2);
477 z_xilf(r1, -1);
478 }
479 }
480 }
481 }
482
483 unsigned long MacroAssembler::create_mask(int lBitPos, int rBitPos) {
484 assert(lBitPos >= 0, "zero is leftmost bit position");
485 assert(rBitPos <= 63, "63 is rightmost bit position");
486 assert(lBitPos <= rBitPos, "inverted selection interval");
487 return (lBitPos == 0 ? (unsigned long)(-1L) : ((1UL<<(63-lBitPos+1))-1)) & (~((1UL<<(63-rBitPos))-1));
488 }
489
490 // Helper function for the "Rotate_then_<logicalOP>" emitters.
491 // Rotate src, then mask register contents such that only bits in range survive.
492 // For oneBits == false, all bits not in range are set to 0. Useful for deleting all bits outside range.
493 // For oneBits == true, all bits not in range are set to 1. Useful for preserving all bits outside range.
494 // The caller must ensure that the selected range only contains bits with defined value.
495 void MacroAssembler::rotate_then_mask(Register dst, Register src, int lBitPos, int rBitPos,
496 int nRotate, bool src32bit, bool dst32bit, bool oneBits) {
497 assert(!(dst32bit && lBitPos < 32), "selection interval out of range for int destination");
498 bool sll4rll = (nRotate >= 0) && (nRotate <= (63-rBitPos)); // Substitute SLL(G) for RLL(G).
499 bool srl4rll = (nRotate < 0) && (-nRotate <= lBitPos); // Substitute SRL(G) for RLL(G).
500 // Pre-determine which parts of dst will be zero after shift/rotate.
501 bool llZero = sll4rll && (nRotate >= 16);
502 bool lhZero = (sll4rll && (nRotate >= 32)) || (srl4rll && (nRotate <= -48));
503 bool lfZero = llZero && lhZero;
504 bool hlZero = (sll4rll && (nRotate >= 48)) || (srl4rll && (nRotate <= -32));
505 bool hhZero = (srl4rll && (nRotate <= -16));
506 bool hfZero = hlZero && hhZero;
507
508 // rotate then mask src operand.
509 // if oneBits == true, all bits outside selected range are 1s.
510 // if oneBits == false, all bits outside selected range are 0s.
511 if (src32bit) { // There might be garbage in the upper 32 bits which will get masked away.
512 if (dst32bit) {
513 z_rll(dst, src, nRotate); // Copy and rotate, upper half of reg remains undisturbed.
514 } else {
515 if (sll4rll) { z_sllg(dst, src, nRotate); }
516 else if (srl4rll) { z_srlg(dst, src, -nRotate); }
517 else { z_rllg(dst, src, nRotate); }
518 }
519 } else {
520 if (sll4rll) { z_sllg(dst, src, nRotate); }
521 else if (srl4rll) { z_srlg(dst, src, -nRotate); }
522 else { z_rllg(dst, src, nRotate); }
523 }
524
525 unsigned long range_mask = create_mask(lBitPos, rBitPos);
526 unsigned int range_mask_h = (unsigned int)(range_mask >> 32);
527 unsigned int range_mask_l = (unsigned int)range_mask;
528 unsigned short range_mask_hh = (unsigned short)(range_mask >> 48);
529 unsigned short range_mask_hl = (unsigned short)(range_mask >> 32);
530 unsigned short range_mask_lh = (unsigned short)(range_mask >> 16);
531 unsigned short range_mask_ll = (unsigned short)range_mask;
532 // Works for z9 and newer H/W.
533 if (oneBits) {
534 if ((~range_mask_l) != 0) { z_oilf(dst, ~range_mask_l); } // All bits outside range become 1s.
535 if (((~range_mask_h) != 0) && !dst32bit) { z_oihf(dst, ~range_mask_h); }
536 } else {
537 // All bits outside range become 0s
538 if (((~range_mask_l) != 0) && !lfZero) {
539 z_nilf(dst, range_mask_l);
540 }
541 if (((~range_mask_h) != 0) && !dst32bit && !hfZero) {
542 z_nihf(dst, range_mask_h);
543 }
544 }
545 }
546
547 // Rotate src, then insert selected range from rotated src into dst.
548 // Clear dst before, if requested.
549 void MacroAssembler::rotate_then_insert(Register dst, Register src, int lBitPos, int rBitPos,
550 int nRotate, bool clear_dst) {
551 // This version does not depend on src being zero-extended int2long.
552 nRotate &= 0x003f; // For risbg, pretend it's an unsigned value.
553 z_risbg(dst, src, lBitPos, rBitPos, nRotate, clear_dst); // Rotate, then insert selected, clear the rest.
554 }
555
556 // Rotate src, then and selected range from rotated src into dst.
557 // Set condition code only if so requested. Otherwise it is unpredictable.
558 // See performance note in macroAssembler_s390.hpp for important information.
559 void MacroAssembler::rotate_then_and(Register dst, Register src, int lBitPos, int rBitPos,
560 int nRotate, bool test_only) {
561 guarantee(!test_only, "Emitter not fit for test_only instruction variant.");
562 // This version does not depend on src being zero-extended int2long.
563 nRotate &= 0x003f; // For risbg, pretend it's an unsigned value.
564 z_rxsbg(dst, src, lBitPos, rBitPos, nRotate, test_only); // Rotate, then xor selected.
565 }
566
567 // Rotate src, then or selected range from rotated src into dst.
568 // Set condition code only if so requested. Otherwise it is unpredictable.
569 // See performance note in macroAssembler_s390.hpp for important information.
570 void MacroAssembler::rotate_then_or(Register dst, Register src, int lBitPos, int rBitPos,
571 int nRotate, bool test_only) {
572 guarantee(!test_only, "Emitter not fit for test_only instruction variant.");
573 // This version does not depend on src being zero-extended int2long.
574 nRotate &= 0x003f; // For risbg, pretend it's an unsigned value.
575 z_rosbg(dst, src, lBitPos, rBitPos, nRotate, test_only); // Rotate, then xor selected.
576 }
577
578 // Rotate src, then xor selected range from rotated src into dst.
579 // Set condition code only if so requested. Otherwise it is unpredictable.
580 // See performance note in macroAssembler_s390.hpp for important information.
581 void MacroAssembler::rotate_then_xor(Register dst, Register src, int lBitPos, int rBitPos,
582 int nRotate, bool test_only) {
583 guarantee(!test_only, "Emitter not fit for test_only instruction variant.");
584 // This version does not depend on src being zero-extended int2long.
585 nRotate &= 0x003f; // For risbg, pretend it's an unsigned value.
586 z_rxsbg(dst, src, lBitPos, rBitPos, nRotate, test_only); // Rotate, then xor selected.
587 }
588
589 void MacroAssembler::add64(Register r1, RegisterOrConstant inc) {
590 if (inc.is_register()) {
591 z_agr(r1, inc.as_register());
592 } else { // constant
593 intptr_t imm = inc.as_constant();
594 add2reg(r1, imm);
595 }
596 }
597 // Helper function to multiply the 64bit contents of a register by a 16bit constant.
598 // The optimization tries to avoid the mghi instruction, since it uses the FPU for
599 // calculation and is thus rather slow.
600 //
601 // There is no handling for special cases, e.g. cval==0 or cval==1.
602 //
603 // Returns len of generated code block.
604 unsigned int MacroAssembler::mul_reg64_const16(Register rval, Register work, int cval) {
605 int block_start = offset();
606
607 bool sign_flip = cval < 0;
608 cval = sign_flip ? -cval : cval;
609
610 BLOCK_COMMENT("Reg64*Con16 {");
611
612 int bit1 = cval & -cval;
613 if (bit1 == cval) {
614 z_sllg(rval, rval, exact_log2(bit1));
615 if (sign_flip) { z_lcgr(rval, rval); }
616 } else {
617 int bit2 = (cval-bit1) & -(cval-bit1);
618 if ((bit1+bit2) == cval) {
619 z_sllg(work, rval, exact_log2(bit1));
620 z_sllg(rval, rval, exact_log2(bit2));
621 z_agr(rval, work);
622 if (sign_flip) { z_lcgr(rval, rval); }
623 } else {
624 if (sign_flip) { z_mghi(rval, -cval); }
625 else { z_mghi(rval, cval); }
626 }
627 }
628 BLOCK_COMMENT("} Reg64*Con16");
629
630 int block_end = offset();
631 return block_end - block_start;
632 }
633
634 // Generic operation r1 := r2 + imm.
635 //
636 // Should produce the best code for each supported CPU version.
637 // r2 == noreg yields r1 := r1 + imm
638 // imm == 0 emits either no instruction or r1 := r2 !
639 // NOTES: 1) Don't use this function where fixed sized
640 // instruction sequences are required!!!
641 // 2) Don't use this function if condition code
642 // setting is required!
643 // 3) Despite being declared as int64_t, the parameter imm
644 // must be a simm_32 value (= signed 32-bit integer).
645 void MacroAssembler::add2reg(Register r1, int64_t imm, Register r2) {
646 assert(Immediate::is_simm32(imm), "probably an implicit conversion went wrong");
647
648 if (r2 == noreg) { r2 = r1; }
649
650 // Handle special case imm == 0.
651 if (imm == 0) {
652 lgr_if_needed(r1, r2);
653 // Nothing else to do.
654 return;
655 }
656
657 if (!PreferLAoverADD || (r2 == Z_R0)) {
658 bool distinctOpnds = VM_Version::has_DistinctOpnds();
659
660 // Can we encode imm in 16 bits signed?
661 if (Immediate::is_simm16(imm)) {
662 if (r1 == r2) {
663 z_aghi(r1, imm);
664 return;
665 }
666 if (distinctOpnds) {
667 z_aghik(r1, r2, imm);
668 return;
669 }
670 z_lgr(r1, r2);
671 z_aghi(r1, imm);
672 return;
673 }
674 } else {
675 // Can we encode imm in 12 bits unsigned?
676 if (Displacement::is_shortDisp(imm)) {
677 z_la(r1, imm, r2);
678 return;
679 }
680 // Can we encode imm in 20 bits signed?
681 if (Displacement::is_validDisp(imm)) {
682 // Always use LAY instruction, so we don't need the tmp register.
683 z_lay(r1, imm, r2);
684 return;
685 }
686
687 }
688
689 // Can handle it (all possible values) with long immediates.
690 lgr_if_needed(r1, r2);
691 z_agfi(r1, imm);
692 }
693
694 // Generic operation r := b + x + d
695 //
696 // Addition of several operands with address generation semantics - sort of:
697 // - no restriction on the registers. Any register will do for any operand.
698 // - x == noreg: operand will be disregarded.
699 // - b == noreg: will use (contents of) result reg as operand (r := r + d).
700 // - x == Z_R0: just disregard
701 // - b == Z_R0: use as operand. This is not address generation semantics!!!
702 //
703 // The same restrictions as on add2reg() are valid!!!
704 void MacroAssembler::add2reg_with_index(Register r, int64_t d, Register x, Register b) {
705 assert(Immediate::is_simm32(d), "probably an implicit conversion went wrong");
706
707 if (x == noreg) { x = Z_R0; }
708 if (b == noreg) { b = r; }
709
710 // Handle special case x == R0.
711 if (x == Z_R0) {
712 // Can simply add the immediate value to the base register.
713 add2reg(r, d, b);
714 return;
715 }
716
717 if (!PreferLAoverADD || (b == Z_R0)) {
718 bool distinctOpnds = VM_Version::has_DistinctOpnds();
719 // Handle special case d == 0.
720 if (d == 0) {
721 if (b == x) { z_sllg(r, b, 1); return; }
722 if (r == x) { z_agr(r, b); return; }
723 if (r == b) { z_agr(r, x); return; }
724 if (distinctOpnds) { z_agrk(r, x, b); return; }
725 z_lgr(r, b);
726 z_agr(r, x);
727 } else {
728 if (x == b) { z_sllg(r, x, 1); }
729 else if (r == x) { z_agr(r, b); }
730 else if (r == b) { z_agr(r, x); }
731 else if (distinctOpnds) { z_agrk(r, x, b); }
732 else {
733 z_lgr(r, b);
734 z_agr(r, x);
735 }
736 add2reg(r, d);
737 }
738 } else {
739 // Can we encode imm in 12 bits unsigned?
740 if (Displacement::is_shortDisp(d)) {
741 z_la(r, d, x, b);
742 return;
743 }
744 // Can we encode imm in 20 bits signed?
745 if (Displacement::is_validDisp(d)) {
746 z_lay(r, d, x, b);
747 return;
748 }
749 z_la(r, 0, x, b);
750 add2reg(r, d);
751 }
752 }
753
754 // Generic emitter (32bit) for direct memory increment.
755 // For optimal code, do not specify Z_R0 as temp register.
756 void MacroAssembler::add2mem_32(const Address &a, int64_t imm, Register tmp) {
757 if (VM_Version::has_MemWithImmALUOps() && Immediate::is_simm8(imm)) {
758 z_asi(a, imm);
759 } else {
760 z_lgf(tmp, a);
761 add2reg(tmp, imm);
762 z_st(tmp, a);
763 }
764 }
765
766 void MacroAssembler::add2mem_64(const Address &a, int64_t imm, Register tmp) {
767 if (VM_Version::has_MemWithImmALUOps() && Immediate::is_simm8(imm)) {
768 z_agsi(a, imm);
769 } else {
770 z_lg(tmp, a);
771 add2reg(tmp, imm);
772 z_stg(tmp, a);
773 }
774 }
775
776 void MacroAssembler::load_sized_value(Register dst, Address src, size_t size_in_bytes, bool is_signed) {
777 switch (size_in_bytes) {
778 case 8: z_lg(dst, src); break;
779 case 4: is_signed ? z_lgf(dst, src) : z_llgf(dst, src); break;
780 case 2: is_signed ? z_lgh(dst, src) : z_llgh(dst, src); break;
781 case 1: is_signed ? z_lgb(dst, src) : z_llgc(dst, src); break;
782 default: ShouldNotReachHere();
783 }
784 }
785
786 void MacroAssembler::store_sized_value(Register src, Address dst, size_t size_in_bytes) {
787 switch (size_in_bytes) {
788 case 8: z_stg(src, dst); break;
789 case 4: z_st(src, dst); break;
790 case 2: z_sth(src, dst); break;
791 case 1: z_stc(src, dst); break;
792 default: ShouldNotReachHere();
793 }
794 }
795
796 // Split a si20 offset (20bit, signed) into an ui12 offset (12bit, unsigned) and
797 // a high-order summand in register tmp.
798 //
799 // return value: < 0: No split required, si20 actually has property uimm12.
800 // >= 0: Split performed. Use return value as uimm12 displacement and
801 // tmp as index register.
802 int MacroAssembler::split_largeoffset(int64_t si20_offset, Register tmp, bool fixed_codelen, bool accumulate) {
803 assert(Immediate::is_simm20(si20_offset), "sanity");
804 int lg_off = (int)si20_offset & 0x0fff; // Punch out low-order 12 bits, always positive.
805 int ll_off = (int)si20_offset & ~0x0fff; // Force low-order 12 bits to zero.
806 assert((Displacement::is_shortDisp(si20_offset) && (ll_off == 0)) ||
807 !Displacement::is_shortDisp(si20_offset), "unexpected offset values");
808 assert((lg_off+ll_off) == si20_offset, "offset splitup error");
809
810 Register work = accumulate? Z_R0 : tmp;
811
812 if (fixed_codelen) { // Len of code = 10 = 4 + 6.
813 z_lghi(work, ll_off>>12); // Implicit sign extension.
814 z_slag(work, work, 12);
815 } else { // Len of code = 0..10.
816 if (ll_off == 0) { return -1; }
817 // ll_off has 8 significant bits (at most) plus sign.
818 if ((ll_off & 0x0000f000) == 0) { // Non-zero bits only in upper halfbyte.
819 z_llilh(work, ll_off >> 16);
820 if (ll_off < 0) { // Sign-extension required.
821 z_lgfr(work, work);
822 }
823 } else {
824 if ((ll_off & 0x000f0000) == 0) { // Non-zero bits only in lower halfbyte.
825 z_llill(work, ll_off);
826 } else { // Non-zero bits in both halfbytes.
827 z_lghi(work, ll_off>>12); // Implicit sign extension.
828 z_slag(work, work, 12);
829 }
830 }
831 }
832 if (accumulate) { z_algr(tmp, work); } // len of code += 4
833 return lg_off;
834 }
835
836 void MacroAssembler::load_float_largeoffset(FloatRegister t, int64_t si20, Register a, Register tmp) {
837 if (Displacement::is_validDisp(si20)) {
838 z_ley(t, si20, a);
839 } else {
840 // Fixed_codelen = true is a simple way to ensure that the size of load_float_largeoffset
841 // does not depend on si20 (scratch buffer emit size == code buffer emit size for constant
842 // pool loads).
843 bool accumulate = true;
844 bool fixed_codelen = true;
845 Register work;
846
847 if (fixed_codelen) {
848 z_lgr(tmp, a); // Lgr_if_needed not applicable due to fixed_codelen.
849 } else {
850 accumulate = (a == tmp);
851 }
852 work = tmp;
853
854 int disp12 = split_largeoffset(si20, work, fixed_codelen, accumulate);
855 if (disp12 < 0) {
856 z_le(t, si20, work);
857 } else {
858 if (accumulate) {
859 z_le(t, disp12, work);
860 } else {
861 z_le(t, disp12, work, a);
862 }
863 }
864 }
865 }
866
867 void MacroAssembler::load_double_largeoffset(FloatRegister t, int64_t si20, Register a, Register tmp) {
868 if (Displacement::is_validDisp(si20)) {
869 z_ldy(t, si20, a);
870 } else {
871 // Fixed_codelen = true is a simple way to ensure that the size of load_double_largeoffset
872 // does not depend on si20 (scratch buffer emit size == code buffer emit size for constant
873 // pool loads).
874 bool accumulate = true;
875 bool fixed_codelen = true;
876 Register work;
877
878 if (fixed_codelen) {
879 z_lgr(tmp, a); // Lgr_if_needed not applicable due to fixed_codelen.
880 } else {
881 accumulate = (a == tmp);
882 }
883 work = tmp;
884
885 int disp12 = split_largeoffset(si20, work, fixed_codelen, accumulate);
886 if (disp12 < 0) {
887 z_ld(t, si20, work);
888 } else {
889 if (accumulate) {
890 z_ld(t, disp12, work);
891 } else {
892 z_ld(t, disp12, work, a);
893 }
894 }
895 }
896 }
897
898 // PCrelative TOC access.
899 // Returns distance (in bytes) from current position to start of consts section.
900 // Returns 0 (zero) if no consts section exists or if it has size zero.
901 long MacroAssembler::toc_distance() {
902 CodeSection* cs = code()->consts();
903 return (long)((cs != NULL) ? cs->start()-pc() : 0);
904 }
905
906 // Implementation on x86/sparc assumes that constant and instruction section are
907 // adjacent, but this doesn't hold. Two special situations may occur, that we must
908 // be able to handle:
909 // 1. const section may be located apart from the inst section.
910 // 2. const section may be empty
911 // In both cases, we use the const section's start address to compute the "TOC",
912 // this seems to occur only temporarily; in the final step we always seem to end up
913 // with the pc-relatice variant.
914 //
915 // PC-relative offset could be +/-2**32 -> use long for disp
916 // Furthermore: makes no sense to have special code for
917 // adjacent const and inst sections.
918 void MacroAssembler::load_toc(Register Rtoc) {
919 // Simply use distance from start of const section (should be patched in the end).
920 long disp = toc_distance();
921
922 RelocationHolder rspec = internal_word_Relocation::spec(pc() + disp);
923 relocate(rspec);
924 z_larl(Rtoc, RelAddr::pcrel_off32(disp)); // Offset is in halfwords.
925 }
926
927 // PCrelative TOC access.
928 // Load from anywhere pcrelative (with relocation of load instr)
929 void MacroAssembler::load_long_pcrelative(Register Rdst, address dataLocation) {
930 address pc = this->pc();
931 ptrdiff_t total_distance = dataLocation - pc;
932 RelocationHolder rspec = internal_word_Relocation::spec(dataLocation);
933
934 assert((total_distance & 0x01L) == 0, "halfword alignment is mandatory");
935 assert(total_distance != 0, "sanity");
936
937 // Some extra safety net.
938 if (!RelAddr::is_in_range_of_RelAddr32(total_distance)) {
939 guarantee(RelAddr::is_in_range_of_RelAddr32(total_distance), "too far away");
940 }
941
942 (this)->relocate(rspec, relocInfo::pcrel_addr_format);
943 z_lgrl(Rdst, RelAddr::pcrel_off32(total_distance));
944 }
945
946
947 // PCrelative TOC access.
948 // Load from anywhere pcrelative (with relocation of load instr)
949 // loaded addr has to be relocated when added to constant pool.
950 void MacroAssembler::load_addr_pcrelative(Register Rdst, address addrLocation) {
951 address pc = this->pc();
952 ptrdiff_t total_distance = addrLocation - pc;
953 RelocationHolder rspec = internal_word_Relocation::spec(addrLocation);
954
955 assert((total_distance & 0x01L) == 0, "halfword alignment is mandatory");
956
957 // Some extra safety net.
958 if (!RelAddr::is_in_range_of_RelAddr32(total_distance)) {
959 guarantee(RelAddr::is_in_range_of_RelAddr32(total_distance), "too far away");
960 }
961
962 (this)->relocate(rspec, relocInfo::pcrel_addr_format);
963 z_lgrl(Rdst, RelAddr::pcrel_off32(total_distance));
964 }
965
966 // Generic operation: load a value from memory and test.
967 // CondCode indicates the sign (<0, ==0, >0) of the loaded value.
968 void MacroAssembler::load_and_test_byte(Register dst, const Address &a) {
969 z_lb(dst, a);
970 z_ltr(dst, dst);
971 }
972
973 void MacroAssembler::load_and_test_short(Register dst, const Address &a) {
974 int64_t disp = a.disp20();
975 if (Displacement::is_shortDisp(disp)) {
976 z_lh(dst, a);
977 } else if (Displacement::is_longDisp(disp)) {
978 z_lhy(dst, a);
979 } else {
980 guarantee(false, "displacement out of range");
981 }
982 z_ltr(dst, dst);
983 }
984
985 void MacroAssembler::load_and_test_int(Register dst, const Address &a) {
986 z_lt(dst, a);
987 }
988
989 void MacroAssembler::load_and_test_int2long(Register dst, const Address &a) {
990 z_ltgf(dst, a);
991 }
992
993 void MacroAssembler::load_and_test_long(Register dst, const Address &a) {
994 z_ltg(dst, a);
995 }
996
997 // Test a bit in memory.
998 void MacroAssembler::testbit(const Address &a, unsigned int bit) {
999 assert(a.index() == noreg, "no index reg allowed in testbit");
1000 if (bit <= 7) {
1001 z_tm(a.disp() + 3, a.base(), 1 << bit);
1002 } else if (bit <= 15) {
1003 z_tm(a.disp() + 2, a.base(), 1 << (bit - 8));
1004 } else if (bit <= 23) {
1005 z_tm(a.disp() + 1, a.base(), 1 << (bit - 16));
1006 } else if (bit <= 31) {
1007 z_tm(a.disp() + 0, a.base(), 1 << (bit - 24));
1008 } else {
1009 ShouldNotReachHere();
1010 }
1011 }
1012
1013 // Test a bit in a register. Result is reflected in CC.
1014 void MacroAssembler::testbit(Register r, unsigned int bitPos) {
1015 if (bitPos < 16) {
1016 z_tmll(r, 1U<<bitPos);
1017 } else if (bitPos < 32) {
1018 z_tmlh(r, 1U<<(bitPos-16));
1019 } else if (bitPos < 48) {
1020 z_tmhl(r, 1U<<(bitPos-32));
1021 } else if (bitPos < 64) {
1022 z_tmhh(r, 1U<<(bitPos-48));
1023 } else {
1024 ShouldNotReachHere();
1025 }
1026 }
1027
1028 // Clear a register, i.e. load const zero into reg.
1029 // Return len (in bytes) of generated instruction(s).
1030 // whole_reg: Clear 64 bits if true, 32 bits otherwise.
1031 // set_cc: Use instruction that sets the condition code, if true.
1032 int MacroAssembler::clear_reg(Register r, bool whole_reg, bool set_cc) {
1033 unsigned int start_off = offset();
1034 if (whole_reg) {
1035 set_cc ? z_xgr(r, r) : z_laz(r, 0, Z_R0);
1036 } else { // Only 32bit register.
1037 set_cc ? z_xr(r, r) : z_lhi(r, 0);
1038 }
1039 return offset() - start_off;
1040 }
1041
1042 #ifdef ASSERT
1043 int MacroAssembler::preset_reg(Register r, unsigned long pattern, int pattern_len) {
1044 switch (pattern_len) {
1045 case 1:
1046 pattern = (pattern & 0x000000ff) | ((pattern & 0x000000ff)<<8);
1047 case 2:
1048 pattern = (pattern & 0x0000ffff) | ((pattern & 0x0000ffff)<<16);
1049 case 4:
1050 pattern = (pattern & 0xffffffffL) | ((pattern & 0xffffffffL)<<32);
1051 case 8:
1052 return load_const_optimized_rtn_len(r, pattern, true);
1053 break;
1054 default:
1055 guarantee(false, "preset_reg: bad len");
1056 }
1057 return 0;
1058 }
1059 #endif
1060
1061 // addr: Address descriptor of memory to clear index register will not be used !
1062 // size: Number of bytes to clear.
1063 // !!! DO NOT USE THEM FOR ATOMIC MEMORY CLEARING !!!
1064 // !!! Use store_const() instead !!!
1065 void MacroAssembler::clear_mem(const Address& addr, unsigned size) {
1066 guarantee(size <= 256, "MacroAssembler::clear_mem: size too large");
1067
1068 if (size == 1) {
1069 z_mvi(addr, 0);
1070 return;
1071 }
1072
1073 switch (size) {
1074 case 2: z_mvhhi(addr, 0);
1075 return;
1076 case 4: z_mvhi(addr, 0);
1077 return;
1078 case 8: z_mvghi(addr, 0);
1079 return;
1080 default: ; // Fallthru to xc.
1081 }
1082
1083 z_xc(addr, size, addr);
1084 }
1085
1086 void MacroAssembler::align(int modulus) {
1087 while (offset() % modulus != 0) z_nop();
1088 }
1089
1090 // Special version for non-relocateable code if required alignment
1091 // is larger than CodeEntryAlignment.
1092 void MacroAssembler::align_address(int modulus) {
1093 while ((uintptr_t)pc() % modulus != 0) z_nop();
1094 }
1095
1096 Address MacroAssembler::argument_address(RegisterOrConstant arg_slot,
1097 Register temp_reg,
1098 int64_t extra_slot_offset) {
1099 // On Z, we can have index and disp in an Address. So don't call argument_offset,
1100 // which issues an unnecessary add instruction.
1101 int stackElementSize = Interpreter::stackElementSize;
1102 int64_t offset = extra_slot_offset * stackElementSize;
1103 const Register argbase = Z_esp;
1104 if (arg_slot.is_constant()) {
1105 offset += arg_slot.as_constant() * stackElementSize;
1106 return Address(argbase, offset);
1107 }
1108 // else
1109 assert(temp_reg != noreg, "must specify");
1110 assert(temp_reg != Z_ARG1, "base and index are conflicting");
1111 z_sllg(temp_reg, arg_slot.as_register(), exact_log2(stackElementSize)); // tempreg = arg_slot << 3
1112 return Address(argbase, temp_reg, offset);
1113 }
1114
1115
1116 //===================================================================
1117 //=== START C O N S T A N T S I N C O D E S T R E A M ===
1118 //===================================================================
1119 //=== P A T CH A B L E C O N S T A N T S ===
1120 //===================================================================
1121
1122
1123 //---------------------------------------------------
1124 // Load (patchable) constant into register
1125 //---------------------------------------------------
1126
1127
1128 // Load absolute address (and try to optimize).
1129 // Note: This method is usable only for position-fixed code,
1130 // referring to a position-fixed target location.
1131 // If not so, relocations and patching must be used.
1132 void MacroAssembler::load_absolute_address(Register d, address addr) {
1133 assert(addr != NULL, "should not happen");
1134 BLOCK_COMMENT("load_absolute_address:");
1135 if (addr == NULL) {
1136 z_larl(d, pc()); // Dummy emit for size calc.
1137 return;
1138 }
1139
1140 if (RelAddr::is_in_range_of_RelAddr32(addr, pc())) {
1141 z_larl(d, addr);
1142 return;
1143 }
1144
1145 load_const_optimized(d, (long)addr);
1146 }
1147
1148 // Load a 64bit constant.
1149 // Patchable code sequence, but not atomically patchable.
1150 // Make sure to keep code size constant -> no value-dependent optimizations.
1151 // Do not kill condition code.
1152 void MacroAssembler::load_const(Register t, long x) {
1153 Assembler::z_iihf(t, (int)(x >> 32));
1154 Assembler::z_iilf(t, (int)(x & 0xffffffff));
1155 }
1156
1157 // Load a 32bit constant into a 64bit register, sign-extend or zero-extend.
1158 // Patchable code sequence, but not atomically patchable.
1159 // Make sure to keep code size constant -> no value-dependent optimizations.
1160 // Do not kill condition code.
1161 void MacroAssembler::load_const_32to64(Register t, int64_t x, bool sign_extend) {
1162 if (sign_extend) { Assembler::z_lgfi(t, x); }
1163 else { Assembler::z_llilf(t, x); }
1164 }
1165
1166 // Load narrow oop constant, no decompression.
1167 void MacroAssembler::load_narrow_oop(Register t, narrowOop a) {
1168 assert(UseCompressedOops, "must be on to call this method");
1169 load_const_32to64(t, a, false /*sign_extend*/);
1170 }
1171
1172 // Load narrow klass constant, compression required.
1173 void MacroAssembler::load_narrow_klass(Register t, Klass* k) {
1174 assert(UseCompressedClassPointers, "must be on to call this method");
1175 narrowKlass encoded_k = Klass::encode_klass(k);
1176 load_const_32to64(t, encoded_k, false /*sign_extend*/);
1177 }
1178
1179 //------------------------------------------------------
1180 // Compare (patchable) constant with register.
1181 //------------------------------------------------------
1182
1183 // Compare narrow oop in reg with narrow oop constant, no decompression.
1184 void MacroAssembler::compare_immediate_narrow_oop(Register oop1, narrowOop oop2) {
1185 assert(UseCompressedOops, "must be on to call this method");
1186
1187 Assembler::z_clfi(oop1, oop2);
1188 }
1189
1190 // Compare narrow oop in reg with narrow oop constant, no decompression.
1191 void MacroAssembler::compare_immediate_narrow_klass(Register klass1, Klass* klass2) {
1192 assert(UseCompressedClassPointers, "must be on to call this method");
1193 narrowKlass encoded_k = Klass::encode_klass(klass2);
1194
1195 Assembler::z_clfi(klass1, encoded_k);
1196 }
1197
1198 //----------------------------------------------------------
1199 // Check which kind of load_constant we have here.
1200 //----------------------------------------------------------
1201
1202 // Detection of CPU version dependent load_const sequence.
1203 // The detection is valid only for code sequences generated by load_const,
1204 // not load_const_optimized.
1205 bool MacroAssembler::is_load_const(address a) {
1206 unsigned long inst1, inst2;
1207 unsigned int len1, len2;
1208
1209 len1 = get_instruction(a, &inst1);
1210 len2 = get_instruction(a + len1, &inst2);
1211
1212 return is_z_iihf(inst1) && is_z_iilf(inst2);
1213 }
1214
1215 // Detection of CPU version dependent load_const_32to64 sequence.
1216 // Mostly used for narrow oops and narrow Klass pointers.
1217 // The detection is valid only for code sequences generated by load_const_32to64.
1218 bool MacroAssembler::is_load_const_32to64(address pos) {
1219 unsigned long inst1, inst2;
1220 unsigned int len1;
1221
1222 len1 = get_instruction(pos, &inst1);
1223 return is_z_llilf(inst1);
1224 }
1225
1226 // Detection of compare_immediate_narrow sequence.
1227 // The detection is valid only for code sequences generated by compare_immediate_narrow_oop.
1228 bool MacroAssembler::is_compare_immediate32(address pos) {
1229 return is_equal(pos, CLFI_ZOPC, RIL_MASK);
1230 }
1231
1232 // Detection of compare_immediate_narrow sequence.
1233 // The detection is valid only for code sequences generated by compare_immediate_narrow_oop.
1234 bool MacroAssembler::is_compare_immediate_narrow_oop(address pos) {
1235 return is_compare_immediate32(pos);
1236 }
1237
1238 // Detection of compare_immediate_narrow sequence.
1239 // The detection is valid only for code sequences generated by compare_immediate_narrow_klass.
1240 bool MacroAssembler::is_compare_immediate_narrow_klass(address pos) {
1241 return is_compare_immediate32(pos);
1242 }
1243
1244 //-----------------------------------
1245 // patch the load_constant
1246 //-----------------------------------
1247
1248 // CPU-version dependend patching of load_const.
1249 void MacroAssembler::patch_const(address a, long x) {
1250 assert(is_load_const(a), "not a load of a constant");
1251 set_imm32((address)a, (int) ((x >> 32) & 0xffffffff));
1252 set_imm32((address)(a + 6), (int)(x & 0xffffffff));
1253 }
1254
1255 // Patching the value of CPU version dependent load_const_32to64 sequence.
1256 // The passed ptr MUST be in compressed format!
1257 int MacroAssembler::patch_load_const_32to64(address pos, int64_t np) {
1258 assert(is_load_const_32to64(pos), "not a load of a narrow ptr (oop or klass)");
1259
1260 set_imm32(pos, np);
1261 return 6;
1262 }
1263
1264 // Patching the value of CPU version dependent compare_immediate_narrow sequence.
1265 // The passed ptr MUST be in compressed format!
1266 int MacroAssembler::patch_compare_immediate_32(address pos, int64_t np) {
1267 assert(is_compare_immediate32(pos), "not a compressed ptr compare");
1268
1269 set_imm32(pos, np);
1270 return 6;
1271 }
1272
1273 // Patching the immediate value of CPU version dependent load_narrow_oop sequence.
1274 // The passed ptr must NOT be in compressed format!
1275 int MacroAssembler::patch_load_narrow_oop(address pos, oop o) {
1276 assert(UseCompressedOops, "Can only patch compressed oops");
1277
1278 narrowOop no = oopDesc::encode_heap_oop(o);
1279 return patch_load_const_32to64(pos, no);
1280 }
1281
1282 // Patching the immediate value of CPU version dependent load_narrow_klass sequence.
1283 // The passed ptr must NOT be in compressed format!
1284 int MacroAssembler::patch_load_narrow_klass(address pos, Klass* k) {
1285 assert(UseCompressedClassPointers, "Can only patch compressed klass pointers");
1286
1287 narrowKlass nk = Klass::encode_klass(k);
1288 return patch_load_const_32to64(pos, nk);
1289 }
1290
1291 // Patching the immediate value of CPU version dependent compare_immediate_narrow_oop sequence.
1292 // The passed ptr must NOT be in compressed format!
1293 int MacroAssembler::patch_compare_immediate_narrow_oop(address pos, oop o) {
1294 assert(UseCompressedOops, "Can only patch compressed oops");
1295
1296 narrowOop no = oopDesc::encode_heap_oop(o);
1297 return patch_compare_immediate_32(pos, no);
1298 }
1299
1300 // Patching the immediate value of CPU version dependent compare_immediate_narrow_klass sequence.
1301 // The passed ptr must NOT be in compressed format!
1302 int MacroAssembler::patch_compare_immediate_narrow_klass(address pos, Klass* k) {
1303 assert(UseCompressedClassPointers, "Can only patch compressed klass pointers");
1304
1305 narrowKlass nk = Klass::encode_klass(k);
1306 return patch_compare_immediate_32(pos, nk);
1307 }
1308
1309 //------------------------------------------------------------------------
1310 // Extract the constant from a load_constant instruction stream.
1311 //------------------------------------------------------------------------
1312
1313 // Get constant from a load_const sequence.
1314 long MacroAssembler::get_const(address a) {
1315 assert(is_load_const(a), "not a load of a constant");
1316 unsigned long x;
1317 x = (((unsigned long) (get_imm32(a,0) & 0xffffffff)) << 32);
1318 x |= (((unsigned long) (get_imm32(a,1) & 0xffffffff)));
1319 return (long) x;
1320 }
1321
1322 //--------------------------------------
1323 // Store a constant in memory.
1324 //--------------------------------------
1325
1326 // General emitter to move a constant to memory.
1327 // The store is atomic.
1328 // o Address must be given in RS format (no index register)
1329 // o Displacement should be 12bit unsigned for efficiency. 20bit signed also supported.
1330 // o Constant can be 1, 2, 4, or 8 bytes, signed or unsigned.
1331 // o Memory slot can be 1, 2, 4, or 8 bytes, signed or unsigned.
1332 // o Memory slot must be at least as wide as constant, will assert otherwise.
1333 // o Signed constants will sign-extend, unsigned constants will zero-extend to slot width.
1334 int MacroAssembler::store_const(const Address &dest, long imm,
1335 unsigned int lm, unsigned int lc,
1336 Register scratch) {
1337 int64_t disp = dest.disp();
1338 Register base = dest.base();
1339 assert(!dest.has_index(), "not supported");
1340 assert((lm==1)||(lm==2)||(lm==4)||(lm==8), "memory length not supported");
1341 assert((lc==1)||(lc==2)||(lc==4)||(lc==8), "constant length not supported");
1342 assert(lm>=lc, "memory slot too small");
1343 assert(lc==8 || Immediate::is_simm(imm, lc*8), "const out of range");
1344 assert(Displacement::is_validDisp(disp), "displacement out of range");
1345
1346 bool is_shortDisp = Displacement::is_shortDisp(disp);
1347 int store_offset = -1;
1348
1349 // For target len == 1 it's easy.
1350 if (lm == 1) {
1351 store_offset = offset();
1352 if (is_shortDisp) {
1353 z_mvi(disp, base, imm);
1354 return store_offset;
1355 } else {
1356 z_mviy(disp, base, imm);
1357 return store_offset;
1358 }
1359 }
1360
1361 // All the "good stuff" takes an unsigned displacement.
1362 if (is_shortDisp) {
1363 // NOTE: Cannot use clear_mem for imm==0, because it is not atomic.
1364
1365 store_offset = offset();
1366 switch (lm) {
1367 case 2: // Lc == 1 handled correctly here, even for unsigned. Instruction does no widening.
1368 z_mvhhi(disp, base, imm);
1369 return store_offset;
1370 case 4:
1371 if (Immediate::is_simm16(imm)) {
1372 z_mvhi(disp, base, imm);
1373 return store_offset;
1374 }
1375 break;
1376 case 8:
1377 if (Immediate::is_simm16(imm)) {
1378 z_mvghi(disp, base, imm);
1379 return store_offset;
1380 }
1381 break;
1382 default:
1383 ShouldNotReachHere();
1384 break;
1385 }
1386 }
1387
1388 // Can't optimize, so load value and store it.
1389 guarantee(scratch != noreg, " need a scratch register here !");
1390 if (imm != 0) {
1391 load_const_optimized(scratch, imm); // Preserves CC anyway.
1392 } else {
1393 // Leave CC alone!!
1394 (void) clear_reg(scratch, true, false); // Indicate unused result.
1395 }
1396
1397 store_offset = offset();
1398 if (is_shortDisp) {
1399 switch (lm) {
1400 case 2:
1401 z_sth(scratch, disp, Z_R0, base);
1402 return store_offset;
1403 case 4:
1404 z_st(scratch, disp, Z_R0, base);
1405 return store_offset;
1406 case 8:
1407 z_stg(scratch, disp, Z_R0, base);
1408 return store_offset;
1409 default:
1410 ShouldNotReachHere();
1411 break;
1412 }
1413 } else {
1414 switch (lm) {
1415 case 2:
1416 z_sthy(scratch, disp, Z_R0, base);
1417 return store_offset;
1418 case 4:
1419 z_sty(scratch, disp, Z_R0, base);
1420 return store_offset;
1421 case 8:
1422 z_stg(scratch, disp, Z_R0, base);
1423 return store_offset;
1424 default:
1425 ShouldNotReachHere();
1426 break;
1427 }
1428 }
1429 return -1; // should not reach here
1430 }
1431
1432 //===================================================================
1433 //=== N O T P A T CH A B L E C O N S T A N T S ===
1434 //===================================================================
1435
1436 // Load constant x into register t with a fast instrcution sequence
1437 // depending on the bits in x. Preserves CC under all circumstances.
1438 int MacroAssembler::load_const_optimized_rtn_len(Register t, long x, bool emit) {
1439 if (x == 0) {
1440 int len;
1441 if (emit) {
1442 len = clear_reg(t, true, false);
1443 } else {
1444 len = 4;
1445 }
1446 return len;
1447 }
1448
1449 if (Immediate::is_simm16(x)) {
1450 if (emit) { z_lghi(t, x); }
1451 return 4;
1452 }
1453
1454 // 64 bit value: | part1 | part2 | part3 | part4 |
1455 // At least one part is not zero!
1456 int part1 = ((x >> 32) & 0xffff0000) >> 16;
1457 int part2 = (x >> 32) & 0x0000ffff;
1458 int part3 = (x & 0xffff0000) >> 16;
1459 int part4 = (x & 0x0000ffff);
1460
1461 // Lower word only (unsigned).
1462 if ((part1 == 0) && (part2 == 0)) {
1463 if (part3 == 0) {
1464 if (emit) z_llill(t, part4);
1465 return 4;
1466 }
1467 if (part4 == 0) {
1468 if (emit) z_llilh(t, part3);
1469 return 4;
1470 }
1471 if (emit) z_llilf(t, (int)(x & 0xffffffff));
1472 return 6;
1473 }
1474
1475 // Upper word only.
1476 if ((part3 == 0) && (part4 == 0)) {
1477 if (part1 == 0) {
1478 if (emit) z_llihl(t, part2);
1479 return 4;
1480 }
1481 if (part2 == 0) {
1482 if (emit) z_llihh(t, part1);
1483 return 4;
1484 }
1485 if (emit) z_llihf(t, (int)(x >> 32));
1486 return 6;
1487 }
1488
1489 // Lower word only (signed).
1490 if ((part1 == 0x0000ffff) && (part2 == 0x0000ffff) && ((part3 & 0x00008000) != 0)) {
1491 if (emit) z_lgfi(t, (int)(x & 0xffffffff));
1492 return 6;
1493 }
1494
1495 int len = 0;
1496
1497 if ((part1 == 0) || (part2 == 0)) {
1498 if (part1 == 0) {
1499 if (emit) z_llihl(t, part2);
1500 len += 4;
1501 } else {
1502 if (emit) z_llihh(t, part1);
1503 len += 4;
1504 }
1505 } else {
1506 if (emit) z_llihf(t, (int)(x >> 32));
1507 len += 6;
1508 }
1509
1510 if ((part3 == 0) || (part4 == 0)) {
1511 if (part3 == 0) {
1512 if (emit) z_iill(t, part4);
1513 len += 4;
1514 } else {
1515 if (emit) z_iilh(t, part3);
1516 len += 4;
1517 }
1518 } else {
1519 if (emit) z_iilf(t, (int)(x & 0xffffffff));
1520 len += 6;
1521 }
1522 return len;
1523 }
1524
1525 //=====================================================================
1526 //=== H I G H E R L E V E L B R A N C H E M I T T E R S ===
1527 //=====================================================================
1528
1529 // Note: In the worst case, one of the scratch registers is destroyed!!!
1530 void MacroAssembler::compare32_and_branch(Register r1, RegisterOrConstant x2, branch_condition cond, Label& lbl) {
1531 // Right operand is constant.
1532 if (x2.is_constant()) {
1533 jlong value = x2.as_constant();
1534 compare_and_branch_optimized(r1, value, cond, lbl, /*len64=*/false, /*has_sign=*/true);
1535 return;
1536 }
1537
1538 // Right operand is in register.
1539 compare_and_branch_optimized(r1, x2.as_register(), cond, lbl, /*len64=*/false, /*has_sign=*/true);
1540 }
1541
1542 // Note: In the worst case, one of the scratch registers is destroyed!!!
1543 void MacroAssembler::compareU32_and_branch(Register r1, RegisterOrConstant x2, branch_condition cond, Label& lbl) {
1544 // Right operand is constant.
1545 if (x2.is_constant()) {
1546 jlong value = x2.as_constant();
1547 compare_and_branch_optimized(r1, value, cond, lbl, /*len64=*/false, /*has_sign=*/false);
1548 return;
1549 }
1550
1551 // Right operand is in register.
1552 compare_and_branch_optimized(r1, x2.as_register(), cond, lbl, /*len64=*/false, /*has_sign=*/false);
1553 }
1554
1555 // Note: In the worst case, one of the scratch registers is destroyed!!!
1556 void MacroAssembler::compare64_and_branch(Register r1, RegisterOrConstant x2, branch_condition cond, Label& lbl) {
1557 // Right operand is constant.
1558 if (x2.is_constant()) {
1559 jlong value = x2.as_constant();
1560 compare_and_branch_optimized(r1, value, cond, lbl, /*len64=*/true, /*has_sign=*/true);
1561 return;
1562 }
1563
1564 // Right operand is in register.
1565 compare_and_branch_optimized(r1, x2.as_register(), cond, lbl, /*len64=*/true, /*has_sign=*/true);
1566 }
1567
1568 void MacroAssembler::compareU64_and_branch(Register r1, RegisterOrConstant x2, branch_condition cond, Label& lbl) {
1569 // Right operand is constant.
1570 if (x2.is_constant()) {
1571 jlong value = x2.as_constant();
1572 compare_and_branch_optimized(r1, value, cond, lbl, /*len64=*/true, /*has_sign=*/false);
1573 return;
1574 }
1575
1576 // Right operand is in register.
1577 compare_and_branch_optimized(r1, x2.as_register(), cond, lbl, /*len64=*/true, /*has_sign=*/false);
1578 }
1579
1580 // Generate an optimal branch to the branch target.
1581 // Optimal means that a relative branch (brc or brcl) is used if the
1582 // branch distance is short enough. Loading the target address into a
1583 // register and branching via reg is used as fallback only.
1584 //
1585 // Used registers:
1586 // Z_R1 - work reg. Holds branch target address.
1587 // Used in fallback case only.
1588 //
1589 // This version of branch_optimized is good for cases where the target address is known
1590 // and constant, i.e. is never changed (no relocation, no patching).
1591 void MacroAssembler::branch_optimized(Assembler::branch_condition cond, address branch_addr) {
1592 address branch_origin = pc();
1593
1594 if (RelAddr::is_in_range_of_RelAddr16(branch_addr, branch_origin)) {
1595 z_brc(cond, branch_addr);
1596 } else if (RelAddr::is_in_range_of_RelAddr32(branch_addr, branch_origin)) {
1597 z_brcl(cond, branch_addr);
1598 } else {
1599 load_const_optimized(Z_R1, branch_addr); // CC must not get killed by load_const_optimized.
1600 z_bcr(cond, Z_R1);
1601 }
1602 }
1603
1604 // This version of branch_optimized is good for cases where the target address
1605 // is potentially not yet known at the time the code is emitted.
1606 //
1607 // One very common case is a branch to an unbound label which is handled here.
1608 // The caller might know (or hope) that the branch distance is short enough
1609 // to be encoded in a 16bit relative address. In this case he will pass a
1610 // NearLabel branch_target.
1611 // Care must be taken with unbound labels. Each call to target(label) creates
1612 // an entry in the patch queue for that label to patch all references of the label
1613 // once it gets bound. Those recorded patch locations must be patchable. Otherwise,
1614 // an assertion fires at patch time.
1615 void MacroAssembler::branch_optimized(Assembler::branch_condition cond, Label& branch_target) {
1616 if (branch_target.is_bound()) {
1617 address branch_addr = target(branch_target);
1618 branch_optimized(cond, branch_addr);
1619 } else if (branch_target.is_near()) {
1620 z_brc(cond, branch_target); // Caller assures that the target will be in range for z_brc.
1621 } else {
1622 z_brcl(cond, branch_target); // Let's hope target is in range. Otherwise, we will abort at patch time.
1623 }
1624 }
1625
1626 // Generate an optimal compare and branch to the branch target.
1627 // Optimal means that a relative branch (clgrj, brc or brcl) is used if the
1628 // branch distance is short enough. Loading the target address into a
1629 // register and branching via reg is used as fallback only.
1630 //
1631 // Input:
1632 // r1 - left compare operand
1633 // r2 - right compare operand
1634 void MacroAssembler::compare_and_branch_optimized(Register r1,
1635 Register r2,
1636 Assembler::branch_condition cond,
1637 address branch_addr,
1638 bool len64,
1639 bool has_sign) {
1640 unsigned int casenum = (len64?2:0)+(has_sign?0:1);
1641
1642 address branch_origin = pc();
1643 if (VM_Version::has_CompareBranch() && RelAddr::is_in_range_of_RelAddr16(branch_addr, branch_origin)) {
1644 switch (casenum) {
1645 case 0: z_crj( r1, r2, cond, branch_addr); break;
1646 case 1: z_clrj (r1, r2, cond, branch_addr); break;
1647 case 2: z_cgrj(r1, r2, cond, branch_addr); break;
1648 case 3: z_clgrj(r1, r2, cond, branch_addr); break;
1649 default: ShouldNotReachHere(); break;
1650 }
1651 } else {
1652 switch (casenum) {
1653 case 0: z_cr( r1, r2); break;
1654 case 1: z_clr(r1, r2); break;
1655 case 2: z_cgr(r1, r2); break;
1656 case 3: z_clgr(r1, r2); break;
1657 default: ShouldNotReachHere(); break;
1658 }
1659 branch_optimized(cond, branch_addr);
1660 }
1661 }
1662
1663 // Generate an optimal compare and branch to the branch target.
1664 // Optimal means that a relative branch (clgij, brc or brcl) is used if the
1665 // branch distance is short enough. Loading the target address into a
1666 // register and branching via reg is used as fallback only.
1667 //
1668 // Input:
1669 // r1 - left compare operand (in register)
1670 // x2 - right compare operand (immediate)
1671 void MacroAssembler::compare_and_branch_optimized(Register r1,
1672 jlong x2,
1673 Assembler::branch_condition cond,
1674 Label& branch_target,
1675 bool len64,
1676 bool has_sign) {
1677 address branch_origin = pc();
1678 bool x2_imm8 = (has_sign && Immediate::is_simm8(x2)) || (!has_sign && Immediate::is_uimm8(x2));
1679 bool is_RelAddr16 = branch_target.is_near() ||
1680 (branch_target.is_bound() &&
1681 RelAddr::is_in_range_of_RelAddr16(target(branch_target), branch_origin));
1682 unsigned int casenum = (len64?2:0)+(has_sign?0:1);
1683
1684 if (VM_Version::has_CompareBranch() && is_RelAddr16 && x2_imm8) {
1685 switch (casenum) {
1686 case 0: z_cij( r1, x2, cond, branch_target); break;
1687 case 1: z_clij(r1, x2, cond, branch_target); break;
1688 case 2: z_cgij(r1, x2, cond, branch_target); break;
1689 case 3: z_clgij(r1, x2, cond, branch_target); break;
1690 default: ShouldNotReachHere(); break;
1691 }
1692 return;
1693 }
1694
1695 if (x2 == 0) {
1696 switch (casenum) {
1697 case 0: z_ltr(r1, r1); break;
1698 case 1: z_ltr(r1, r1); break; // Caution: unsigned test only provides zero/notZero indication!
1699 case 2: z_ltgr(r1, r1); break;
1700 case 3: z_ltgr(r1, r1); break; // Caution: unsigned test only provides zero/notZero indication!
1701 default: ShouldNotReachHere(); break;
1702 }
1703 } else {
1704 if ((has_sign && Immediate::is_simm16(x2)) || (!has_sign && Immediate::is_uimm(x2, 15))) {
1705 switch (casenum) {
1706 case 0: z_chi(r1, x2); break;
1707 case 1: z_chi(r1, x2); break; // positive immediate < 2**15
1708 case 2: z_cghi(r1, x2); break;
1709 case 3: z_cghi(r1, x2); break; // positive immediate < 2**15
1710 default: break;
1711 }
1712 } else if ( (has_sign && Immediate::is_simm32(x2)) || (!has_sign && Immediate::is_uimm32(x2)) ) {
1713 switch (casenum) {
1714 case 0: z_cfi( r1, x2); break;
1715 case 1: z_clfi(r1, x2); break;
1716 case 2: z_cgfi(r1, x2); break;
1717 case 3: z_clgfi(r1, x2); break;
1718 default: ShouldNotReachHere(); break;
1719 }
1720 } else {
1721 // No instruction with immediate operand possible, so load into register.
1722 Register scratch = (r1 != Z_R0) ? Z_R0 : Z_R1;
1723 load_const_optimized(scratch, x2);
1724 switch (casenum) {
1725 case 0: z_cr( r1, scratch); break;
1726 case 1: z_clr(r1, scratch); break;
1727 case 2: z_cgr(r1, scratch); break;
1728 case 3: z_clgr(r1, scratch); break;
1729 default: ShouldNotReachHere(); break;
1730 }
1731 }
1732 }
1733 branch_optimized(cond, branch_target);
1734 }
1735
1736 // Generate an optimal compare and branch to the branch target.
1737 // Optimal means that a relative branch (clgrj, brc or brcl) is used if the
1738 // branch distance is short enough. Loading the target address into a
1739 // register and branching via reg is used as fallback only.
1740 //
1741 // Input:
1742 // r1 - left compare operand
1743 // r2 - right compare operand
1744 void MacroAssembler::compare_and_branch_optimized(Register r1,
1745 Register r2,
1746 Assembler::branch_condition cond,
1747 Label& branch_target,
1748 bool len64,
1749 bool has_sign) {
1750 unsigned int casenum = (len64 ? 2 : 0) + (has_sign ? 0 : 1);
1751
1752 if (branch_target.is_bound()) {
1753 address branch_addr = target(branch_target);
1754 compare_and_branch_optimized(r1, r2, cond, branch_addr, len64, has_sign);
1755 } else {
1756 if (VM_Version::has_CompareBranch() && branch_target.is_near()) {
1757 switch (casenum) {
1758 case 0: z_crj( r1, r2, cond, branch_target); break;
1759 case 1: z_clrj( r1, r2, cond, branch_target); break;
1760 case 2: z_cgrj( r1, r2, cond, branch_target); break;
1761 case 3: z_clgrj(r1, r2, cond, branch_target); break;
1762 default: ShouldNotReachHere(); break;
1763 }
1764 } else {
1765 switch (casenum) {
1766 case 0: z_cr( r1, r2); break;
1767 case 1: z_clr(r1, r2); break;
1768 case 2: z_cgr(r1, r2); break;
1769 case 3: z_clgr(r1, r2); break;
1770 default: ShouldNotReachHere(); break;
1771 }
1772 branch_optimized(cond, branch_target);
1773 }
1774 }
1775 }
1776
1777 //===========================================================================
1778 //=== END H I G H E R L E V E L B R A N C H E M I T T E R S ===
1779 //===========================================================================
1780
1781 AddressLiteral MacroAssembler::allocate_metadata_address(Metadata* obj) {
1782 assert(oop_recorder() != NULL, "this assembler needs an OopRecorder");
1783 int index = oop_recorder()->allocate_metadata_index(obj);
1784 RelocationHolder rspec = metadata_Relocation::spec(index);
1785 return AddressLiteral((address)obj, rspec);
1786 }
1787
1788 AddressLiteral MacroAssembler::constant_metadata_address(Metadata* obj) {
1789 assert(oop_recorder() != NULL, "this assembler needs an OopRecorder");
1790 int index = oop_recorder()->find_index(obj);
1791 RelocationHolder rspec = metadata_Relocation::spec(index);
1792 return AddressLiteral((address)obj, rspec);
1793 }
1794
1795 AddressLiteral MacroAssembler::allocate_oop_address(jobject obj) {
1796 assert(oop_recorder() != NULL, "this assembler needs an OopRecorder");
1797 int oop_index = oop_recorder()->allocate_oop_index(obj);
1798 return AddressLiteral(address(obj), oop_Relocation::spec(oop_index));
1799 }
1800
1801 AddressLiteral MacroAssembler::constant_oop_address(jobject obj) {
1802 assert(oop_recorder() != NULL, "this assembler needs an OopRecorder");
1803 int oop_index = oop_recorder()->find_index(obj);
1804 return AddressLiteral(address(obj), oop_Relocation::spec(oop_index));
1805 }
1806
1807 // NOTE: destroys r
1808 void MacroAssembler::c2bool(Register r, Register t) {
1809 z_lcr(t, r); // t = -r
1810 z_or(r, t); // r = -r OR r
1811 z_srl(r, 31); // Yields 0 if r was 0, 1 otherwise.
1812 }
1813
1814 RegisterOrConstant MacroAssembler::delayed_value_impl(intptr_t* delayed_value_addr,
1815 Register tmp,
1816 int offset) {
1817 intptr_t value = *delayed_value_addr;
1818 if (value != 0) {
1819 return RegisterOrConstant(value + offset);
1820 }
1821
1822 BLOCK_COMMENT("delayed_value {");
1823 // Load indirectly to solve generation ordering problem.
1824 load_absolute_address(tmp, (address) delayed_value_addr); // tmp = a;
1825 z_lg(tmp, 0, tmp); // tmp = *tmp;
1826
1827 #ifdef ASSERT
1828 NearLabel L;
1829 compare64_and_branch(tmp, (intptr_t)0L, Assembler::bcondNotEqual, L);
1830 z_illtrap();
1831 bind(L);
1832 #endif
1833
1834 if (offset != 0) {
1835 z_agfi(tmp, offset); // tmp = tmp + offset;
1836 }
1837
1838 BLOCK_COMMENT("} delayed_value");
1839 return RegisterOrConstant(tmp);
1840 }
1841
1842 // Patch instruction `inst' at offset `inst_pos' to refer to `dest_pos'
1843 // and return the resulting instruction.
1844 // Dest_pos and inst_pos are 32 bit only. These parms can only designate
1845 // relative positions.
1846 // Use correct argument types. Do not pre-calculate distance.
1847 unsigned long MacroAssembler::patched_branch(address dest_pos, unsigned long inst, address inst_pos) {
1848 int c = 0;
1849 unsigned long patched_inst = 0;
1850 if (is_call_pcrelative_short(inst) ||
1851 is_branch_pcrelative_short(inst) ||
1852 is_branchoncount_pcrelative_short(inst) ||
1853 is_branchonindex32_pcrelative_short(inst)) {
1854 c = 1;
1855 int m = fmask(15, 0); // simm16(-1, 16, 32);
1856 int v = simm16(RelAddr::pcrel_off16(dest_pos, inst_pos), 16, 32);
1857 patched_inst = (inst & ~m) | v;
1858 } else if (is_compareandbranch_pcrelative_short(inst)) {
1859 c = 2;
1860 long m = fmask(31, 16); // simm16(-1, 16, 48);
1861 long v = simm16(RelAddr::pcrel_off16(dest_pos, inst_pos), 16, 48);
1862 patched_inst = (inst & ~m) | v;
1863 } else if (is_branchonindex64_pcrelative_short(inst)) {
1864 c = 3;
1865 long m = fmask(31, 16); // simm16(-1, 16, 48);
1866 long v = simm16(RelAddr::pcrel_off16(dest_pos, inst_pos), 16, 48);
1867 patched_inst = (inst & ~m) | v;
1868 } else if (is_call_pcrelative_long(inst) || is_branch_pcrelative_long(inst)) {
1869 c = 4;
1870 long m = fmask(31, 0); // simm32(-1, 16, 48);
1871 long v = simm32(RelAddr::pcrel_off32(dest_pos, inst_pos), 16, 48);
1872 patched_inst = (inst & ~m) | v;
1873 } else if (is_pcrelative_long(inst)) { // These are the non-branch pc-relative instructions.
1874 c = 5;
1875 long m = fmask(31, 0); // simm32(-1, 16, 48);
1876 long v = simm32(RelAddr::pcrel_off32(dest_pos, inst_pos), 16, 48);
1877 patched_inst = (inst & ~m) | v;
1878 } else {
1879 print_dbg_msg(tty, inst, "not a relative branch", 0);
1880 dump_code_range(tty, inst_pos, 32, "not a pcrelative branch");
1881 ShouldNotReachHere();
1882 }
1883
1884 long new_off = get_pcrel_offset(patched_inst);
1885 if (new_off != (dest_pos-inst_pos)) {
1886 tty->print_cr("case %d: dest_pos = %p, inst_pos = %p, disp = %ld(%12.12lx)", c, dest_pos, inst_pos, new_off, new_off);
1887 print_dbg_msg(tty, inst, "<- original instruction: branch patching error", 0);
1888 print_dbg_msg(tty, patched_inst, "<- patched instruction: branch patching error", 0);
1889 #ifdef LUCY_DBG
1890 VM_Version::z_SIGSEGV();
1891 #endif
1892 ShouldNotReachHere();
1893 }
1894 return patched_inst;
1895 }
1896
1897 // Only called when binding labels (share/vm/asm/assembler.cpp)
1898 // Pass arguments as intended. Do not pre-calculate distance.
1899 void MacroAssembler::pd_patch_instruction(address branch, address target) {
1900 unsigned long stub_inst;
1901 int inst_len = get_instruction(branch, &stub_inst);
1902
1903 set_instruction(branch, patched_branch(target, stub_inst, branch), inst_len);
1904 }
1905
1906
1907 // Extract relative address (aka offset).
1908 // inv_simm16 works for 4-byte instructions only.
1909 // compare and branch instructions are 6-byte and have a 16bit offset "in the middle".
1910 long MacroAssembler::get_pcrel_offset(unsigned long inst) {
1911
1912 if (MacroAssembler::is_pcrelative_short(inst)) {
1913 if (((inst&0xFFFFffff00000000UL) == 0) && ((inst&0x00000000FFFF0000UL) != 0)) {
1914 return RelAddr::inv_pcrel_off16(inv_simm16(inst));
1915 } else {
1916 return RelAddr::inv_pcrel_off16(inv_simm16_48(inst));
1917 }
1918 }
1919
1920 if (MacroAssembler::is_pcrelative_long(inst)) {
1921 return RelAddr::inv_pcrel_off32(inv_simm32(inst));
1922 }
1923
1924 print_dbg_msg(tty, inst, "not a pcrelative instruction", 6);
1925 #ifdef LUCY_DBG
1926 VM_Version::z_SIGSEGV();
1927 #else
1928 ShouldNotReachHere();
1929 #endif
1930 return -1;
1931 }
1932
1933 long MacroAssembler::get_pcrel_offset(address pc) {
1934 unsigned long inst;
1935 unsigned int len = get_instruction(pc, &inst);
1936
1937 #ifdef ASSERT
1938 long offset;
1939 if (MacroAssembler::is_pcrelative_short(inst) || MacroAssembler::is_pcrelative_long(inst)) {
1940 offset = get_pcrel_offset(inst);
1941 } else {
1942 offset = -1;
1943 }
1944
1945 if (offset == -1) {
1946 dump_code_range(tty, pc, 32, "not a pcrelative instruction");
1947 #ifdef LUCY_DBG
1948 VM_Version::z_SIGSEGV();
1949 #else
1950 ShouldNotReachHere();
1951 #endif
1952 }
1953 return offset;
1954 #else
1955 return get_pcrel_offset(inst);
1956 #endif // ASSERT
1957 }
1958
1959 // Get target address from pc-relative instructions.
1960 address MacroAssembler::get_target_addr_pcrel(address pc) {
1961 assert(is_pcrelative_long(pc), "not a pcrelative instruction");
1962 return pc + get_pcrel_offset(pc);
1963 }
1964
1965 // Patch pc relative load address.
1966 void MacroAssembler::patch_target_addr_pcrel(address pc, address con) {
1967 unsigned long inst;
1968 // Offset is +/- 2**32 -> use long.
1969 ptrdiff_t distance = con - pc;
1970
1971 get_instruction(pc, &inst);
1972
1973 if (is_pcrelative_short(inst)) {
1974 *(short *)(pc+2) = RelAddr::pcrel_off16(con, pc); // Instructions are at least 2-byte aligned, no test required.
1975
1976 // Some extra safety net.
1977 if (!RelAddr::is_in_range_of_RelAddr16(distance)) {
1978 print_dbg_msg(tty, inst, "distance out of range (16bit)", 4);
1979 dump_code_range(tty, pc, 32, "distance out of range (16bit)");
1980 guarantee(RelAddr::is_in_range_of_RelAddr16(distance), "too far away (more than +/- 2**16");
1981 }
1982 return;
1983 }
1984
1985 if (is_pcrelative_long(inst)) {
1986 *(int *)(pc+2) = RelAddr::pcrel_off32(con, pc);
1987
1988 // Some Extra safety net.
1989 if (!RelAddr::is_in_range_of_RelAddr32(distance)) {
1990 print_dbg_msg(tty, inst, "distance out of range (32bit)", 6);
1991 dump_code_range(tty, pc, 32, "distance out of range (32bit)");
1992 guarantee(RelAddr::is_in_range_of_RelAddr32(distance), "too far away (more than +/- 2**32");
1993 }
1994 return;
1995 }
1996
1997 guarantee(false, "not a pcrelative instruction to patch!");
1998 }
1999
2000 // "Current PC" here means the address just behind the basr instruction.
2001 address MacroAssembler::get_PC(Register result) {
2002 z_basr(result, Z_R0); // Don't branch, just save next instruction address in result.
2003 return pc();
2004 }
2005
2006 // Get current PC + offset.
2007 // Offset given in bytes, must be even!
2008 // "Current PC" here means the address of the larl instruction plus the given offset.
2009 address MacroAssembler::get_PC(Register result, int64_t offset) {
2010 address here = pc();
2011 z_larl(result, offset/2); // Save target instruction address in result.
2012 return here + offset;
2013 }
2014
2015 // Resize_frame with SP(new) = SP(old) - [offset].
2016 void MacroAssembler::resize_frame_sub(Register offset, Register fp, bool load_fp)
2017 {
2018 assert_different_registers(offset, fp, Z_SP);
2019 if (load_fp) { z_lg(fp, _z_abi(callers_sp), Z_SP); }
2020
2021 z_sgr(Z_SP, offset);
2022 z_stg(fp, _z_abi(callers_sp), Z_SP);
2023 }
2024
2025 // Resize_frame with SP(new) = [addr].
2026 void MacroAssembler::resize_frame_absolute(Register addr, Register fp, bool load_fp) {
2027 assert_different_registers(addr, fp, Z_SP);
2028 if (load_fp) { z_lg(fp, _z_abi(callers_sp), Z_SP); }
2029
2030 if (addr != Z_R0) {
2031 // Minimize stalls by not using Z_SP immediately after update.
2032 z_stg(fp, _z_abi(callers_sp), addr);
2033 z_lgr(Z_SP, addr);
2034 } else {
2035 z_lgr(Z_SP, addr);
2036 z_stg(fp, _z_abi(callers_sp), Z_SP);
2037 }
2038 }
2039
2040 // Resize_frame with SP(new) = SP(old) + offset.
2041 void MacroAssembler::resize_frame(RegisterOrConstant offset, Register fp, bool load_fp) {
2042 assert_different_registers(fp, Z_SP);
2043 if (load_fp) z_lg(fp, _z_abi(callers_sp), Z_SP);
2044
2045 if (Displacement::is_validDisp((int)_z_abi(callers_sp) + offset.constant_or_zero())) {
2046 // Minimize stalls by first using, then updating Z_SP.
2047 // Do that only if we have a small positive offset or if ExtImm are available.
2048 z_stg(fp, Address(Z_SP, offset, _z_abi(callers_sp)));
2049 add64(Z_SP, offset);
2050 } else {
2051 add64(Z_SP, offset);
2052 z_stg(fp, _z_abi(callers_sp), Z_SP);
2053 }
2054 }
2055
2056 void MacroAssembler::push_frame(Register bytes, Register old_sp, bool copy_sp, bool bytes_with_inverted_sign) {
2057 #ifdef ASSERT
2058 assert_different_registers(bytes, old_sp, Z_SP);
2059 if (!copy_sp) {
2060 z_cgr(old_sp, Z_SP);
2061 asm_assert_eq("[old_sp]!=[Z_SP]", 0x211);
2062 }
2063 #endif
2064 if (copy_sp) { z_lgr(old_sp, Z_SP); }
2065 if (bytes_with_inverted_sign) {
2066 z_stg(old_sp, 0, bytes, Z_SP);
2067 add2reg_with_index(Z_SP, 0, bytes, Z_SP);
2068 } else {
2069 z_sgr(Z_SP, bytes); // Z_sgfr sufficient, but probably not faster.
2070 z_stg(old_sp, 0, Z_SP);
2071 }
2072 }
2073
2074 unsigned int MacroAssembler::push_frame(unsigned int bytes, Register scratch) {
2075 long offset = Assembler::align(bytes, frame::alignment_in_bytes);
2076
2077 if (Displacement::is_validDisp(-offset)) {
2078 // Minimize stalls by first using, then updating Z_SP.
2079 // Do that only if we have ExtImm available.
2080 z_stg(Z_SP, -offset, Z_SP);
2081 add2reg(Z_SP, -offset);
2082 } else {
2083 if (scratch != Z_R0 && scratch != Z_R1) {
2084 z_stg(Z_SP, -offset, Z_SP);
2085 add2reg(Z_SP, -offset);
2086 } else { // scratch == Z_R0 || scratch == Z_R1
2087 z_lgr(scratch, Z_SP);
2088 add2reg(Z_SP, -offset);
2089 z_stg(scratch, 0, Z_SP);
2090 }
2091 }
2092 return offset;
2093 }
2094
2095 // Push a frame of size `bytes' plus abi160 on top.
2096 unsigned int MacroAssembler::push_frame_abi160(unsigned int bytes) {
2097 BLOCK_COMMENT("push_frame_abi160 {");
2098 unsigned int res = push_frame(bytes + frame::z_abi_160_size);
2099 BLOCK_COMMENT("} push_frame_abi160");
2100 return res;
2101 }
2102
2103 // Pop current C frame.
2104 void MacroAssembler::pop_frame() {
2105 BLOCK_COMMENT("pop_frame:");
2106 Assembler::z_lg(Z_SP, _z_abi(callers_sp), Z_SP);
2107 }
2108
2109 void MacroAssembler::call_VM_leaf_base(address entry_point, bool allow_relocation) {
2110 if (allow_relocation) {
2111 call_c(entry_point);
2112 } else {
2113 call_c_static(entry_point);
2114 }
2115 }
2116
2117 void MacroAssembler::call_VM_leaf_base(address entry_point) {
2118 bool allow_relocation = true;
2119 call_VM_leaf_base(entry_point, allow_relocation);
2120 }
2121
2122 void MacroAssembler::call_VM_base(Register oop_result,
2123 Register last_java_sp,
2124 address entry_point,
2125 bool allow_relocation,
2126 bool check_exceptions) { // Defaults to true.
2127 // Allow_relocation indicates, if true, that the generated code shall
2128 // be fit for code relocation or referenced data relocation. In other
2129 // words: all addresses must be considered variable. PC-relative addressing
2130 // is not possible then.
2131 // On the other hand, if (allow_relocation == false), addresses and offsets
2132 // may be considered stable, enabling us to take advantage of some PC-relative
2133 // addressing tweaks. These might improve performance and reduce code size.
2134
2135 // Determine last_java_sp register.
2136 if (!last_java_sp->is_valid()) {
2137 last_java_sp = Z_SP; // Load Z_SP as SP.
2138 }
2139
2140 set_top_ijava_frame_at_SP_as_last_Java_frame(last_java_sp, Z_R1, allow_relocation);
2141
2142 // ARG1 must hold thread address.
2143 z_lgr(Z_ARG1, Z_thread);
2144
2145 address return_pc = NULL;
2146 if (allow_relocation) {
2147 return_pc = call_c(entry_point);
2148 } else {
2149 return_pc = call_c_static(entry_point);
2150 }
2151
2152 reset_last_Java_frame(allow_relocation);
2153
2154 // C++ interp handles this in the interpreter.
2155 check_and_handle_popframe(Z_thread);
2156 check_and_handle_earlyret(Z_thread);
2157
2158 // Check for pending exceptions.
2159 if (check_exceptions) {
2160 // Check for pending exceptions (java_thread is set upon return).
2161 load_and_test_long(Z_R0_scratch, Address(Z_thread, Thread::pending_exception_offset()));
2162
2163 // This used to conditionally jump to forward_exception however it is
2164 // possible if we relocate that the branch will not reach. So we must jump
2165 // around so we can always reach.
2166
2167 Label ok;
2168 z_bre(ok); // Bcondequal is the same as bcondZero.
2169 call_stub(StubRoutines::forward_exception_entry());
2170 bind(ok);
2171 }
2172
2173 // Get oop result if there is one and reset the value in the thread.
2174 if (oop_result->is_valid()) {
2175 get_vm_result(oop_result);
2176 }
2177
2178 _last_calls_return_pc = return_pc; // Wipe out other (error handling) calls.
2179 }
2180
2181 void MacroAssembler::call_VM_base(Register oop_result,
2182 Register last_java_sp,
2183 address entry_point,
2184 bool check_exceptions) { // Defaults to true.
2185 bool allow_relocation = true;
2186 call_VM_base(oop_result, last_java_sp, entry_point, allow_relocation, check_exceptions);
2187 }
2188
2189 // VM calls without explicit last_java_sp.
2190
2191 void MacroAssembler::call_VM(Register oop_result, address entry_point, bool check_exceptions) {
2192 // Call takes possible detour via InterpreterMacroAssembler.
2193 call_VM_base(oop_result, noreg, entry_point, true, check_exceptions);
2194 }
2195
2196 void MacroAssembler::call_VM(Register oop_result, address entry_point, Register arg_1, bool check_exceptions) {
2197 // Z_ARG1 is reserved for the thread.
2198 lgr_if_needed(Z_ARG2, arg_1);
2199 call_VM(oop_result, entry_point, check_exceptions);
2200 }
2201
2202 void MacroAssembler::call_VM(Register oop_result, address entry_point, Register arg_1, Register arg_2, bool check_exceptions) {
2203 // Z_ARG1 is reserved for the thread.
2204 lgr_if_needed(Z_ARG2, arg_1);
2205 assert(arg_2 != Z_ARG2, "smashed argument");
2206 lgr_if_needed(Z_ARG3, arg_2);
2207 call_VM(oop_result, entry_point, check_exceptions);
2208 }
2209
2210 void MacroAssembler::call_VM(Register oop_result, address entry_point, Register arg_1, Register arg_2,
2211 Register arg_3, bool check_exceptions) {
2212 // Z_ARG1 is reserved for the thread.
2213 lgr_if_needed(Z_ARG2, arg_1);
2214 assert(arg_2 != Z_ARG2, "smashed argument");
2215 lgr_if_needed(Z_ARG3, arg_2);
2216 assert(arg_3 != Z_ARG2 && arg_3 != Z_ARG3, "smashed argument");
2217 lgr_if_needed(Z_ARG4, arg_3);
2218 call_VM(oop_result, entry_point, check_exceptions);
2219 }
2220
2221 // VM static calls without explicit last_java_sp.
2222
2223 void MacroAssembler::call_VM_static(Register oop_result, address entry_point, bool check_exceptions) {
2224 // Call takes possible detour via InterpreterMacroAssembler.
2225 call_VM_base(oop_result, noreg, entry_point, false, check_exceptions);
2226 }
2227
2228 void MacroAssembler::call_VM_static(Register oop_result, address entry_point, Register arg_1, Register arg_2,
2229 Register arg_3, bool check_exceptions) {
2230 // Z_ARG1 is reserved for the thread.
2231 lgr_if_needed(Z_ARG2, arg_1);
2232 assert(arg_2 != Z_ARG2, "smashed argument");
2233 lgr_if_needed(Z_ARG3, arg_2);
2234 assert(arg_3 != Z_ARG2 && arg_3 != Z_ARG3, "smashed argument");
2235 lgr_if_needed(Z_ARG4, arg_3);
2236 call_VM_static(oop_result, entry_point, check_exceptions);
2237 }
2238
2239 // VM calls with explicit last_java_sp.
2240
2241 void MacroAssembler::call_VM(Register oop_result, Register last_java_sp, address entry_point, bool check_exceptions) {
2242 // Call takes possible detour via InterpreterMacroAssembler.
2243 call_VM_base(oop_result, last_java_sp, entry_point, true, check_exceptions);
2244 }
2245
2246 void MacroAssembler::call_VM(Register oop_result, Register last_java_sp, address entry_point, Register arg_1, bool check_exceptions) {
2247 // Z_ARG1 is reserved for the thread.
2248 lgr_if_needed(Z_ARG2, arg_1);
2249 call_VM(oop_result, last_java_sp, entry_point, check_exceptions);
2250 }
2251
2252 void MacroAssembler::call_VM(Register oop_result, Register last_java_sp, address entry_point, Register arg_1,
2253 Register arg_2, bool check_exceptions) {
2254 // Z_ARG1 is reserved for the thread.
2255 lgr_if_needed(Z_ARG2, arg_1);
2256 assert(arg_2 != Z_ARG2, "smashed argument");
2257 lgr_if_needed(Z_ARG3, arg_2);
2258 call_VM(oop_result, last_java_sp, entry_point, check_exceptions);
2259 }
2260
2261 void MacroAssembler::call_VM(Register oop_result, Register last_java_sp, address entry_point, Register arg_1,
2262 Register arg_2, Register arg_3, bool check_exceptions) {
2263 // Z_ARG1 is reserved for the thread.
2264 lgr_if_needed(Z_ARG2, arg_1);
2265 assert(arg_2 != Z_ARG2, "smashed argument");
2266 lgr_if_needed(Z_ARG3, arg_2);
2267 assert(arg_3 != Z_ARG2 && arg_3 != Z_ARG3, "smashed argument");
2268 lgr_if_needed(Z_ARG4, arg_3);
2269 call_VM(oop_result, last_java_sp, entry_point, check_exceptions);
2270 }
2271
2272 // VM leaf calls.
2273
2274 void MacroAssembler::call_VM_leaf(address entry_point) {
2275 // Call takes possible detour via InterpreterMacroAssembler.
2276 call_VM_leaf_base(entry_point, true);
2277 }
2278
2279 void MacroAssembler::call_VM_leaf(address entry_point, Register arg_1) {
2280 if (arg_1 != noreg) lgr_if_needed(Z_ARG1, arg_1);
2281 call_VM_leaf(entry_point);
2282 }
2283
2284 void MacroAssembler::call_VM_leaf(address entry_point, Register arg_1, Register arg_2) {
2285 if (arg_1 != noreg) lgr_if_needed(Z_ARG1, arg_1);
2286 assert(arg_2 != Z_ARG1, "smashed argument");
2287 if (arg_2 != noreg) lgr_if_needed(Z_ARG2, arg_2);
2288 call_VM_leaf(entry_point);
2289 }
2290
2291 void MacroAssembler::call_VM_leaf(address entry_point, Register arg_1, Register arg_2, Register arg_3) {
2292 if (arg_1 != noreg) lgr_if_needed(Z_ARG1, arg_1);
2293 assert(arg_2 != Z_ARG1, "smashed argument");
2294 if (arg_2 != noreg) lgr_if_needed(Z_ARG2, arg_2);
2295 assert(arg_3 != Z_ARG1 && arg_3 != Z_ARG2, "smashed argument");
2296 if (arg_3 != noreg) lgr_if_needed(Z_ARG3, arg_3);
2297 call_VM_leaf(entry_point);
2298 }
2299
2300 // Static VM leaf calls.
2301 // Really static VM leaf calls are never patched.
2302
2303 void MacroAssembler::call_VM_leaf_static(address entry_point) {
2304 // Call takes possible detour via InterpreterMacroAssembler.
2305 call_VM_leaf_base(entry_point, false);
2306 }
2307
2308 void MacroAssembler::call_VM_leaf_static(address entry_point, Register arg_1) {
2309 if (arg_1 != noreg) lgr_if_needed(Z_ARG1, arg_1);
2310 call_VM_leaf_static(entry_point);
2311 }
2312
2313 void MacroAssembler::call_VM_leaf_static(address entry_point, Register arg_1, Register arg_2) {
2314 if (arg_1 != noreg) lgr_if_needed(Z_ARG1, arg_1);
2315 assert(arg_2 != Z_ARG1, "smashed argument");
2316 if (arg_2 != noreg) lgr_if_needed(Z_ARG2, arg_2);
2317 call_VM_leaf_static(entry_point);
2318 }
2319
2320 void MacroAssembler::call_VM_leaf_static(address entry_point, Register arg_1, Register arg_2, Register arg_3) {
2321 if (arg_1 != noreg) lgr_if_needed(Z_ARG1, arg_1);
2322 assert(arg_2 != Z_ARG1, "smashed argument");
2323 if (arg_2 != noreg) lgr_if_needed(Z_ARG2, arg_2);
2324 assert(arg_3 != Z_ARG1 && arg_3 != Z_ARG2, "smashed argument");
2325 if (arg_3 != noreg) lgr_if_needed(Z_ARG3, arg_3);
2326 call_VM_leaf_static(entry_point);
2327 }
2328
2329 // Don't use detour via call_c(reg).
2330 address MacroAssembler::call_c(address function_entry) {
2331 load_const(Z_R1, function_entry);
2332 return call(Z_R1);
2333 }
2334
2335 // Variant for really static (non-relocatable) calls which are never patched.
2336 address MacroAssembler::call_c_static(address function_entry) {
2337 load_absolute_address(Z_R1, function_entry);
2338 #if 0 // def ASSERT
2339 // Verify that call site did not move.
2340 load_const_optimized(Z_R0, function_entry);
2341 z_cgr(Z_R1, Z_R0);
2342 z_brc(bcondEqual, 3);
2343 z_illtrap(0xba);
2344 #endif
2345 return call(Z_R1);
2346 }
2347
2348 address MacroAssembler::call_c_opt(address function_entry) {
2349 bool success = call_far_patchable(function_entry, -2 /* emit relocation + constant */);
2350 _last_calls_return_pc = success ? pc() : NULL;
2351 return _last_calls_return_pc;
2352 }
2353
2354 // Identify a call_far_patchable instruction: LARL + LG + BASR
2355 //
2356 // nop ; optionally, if required for alignment
2357 // lgrl rx,A(TOC entry) ; PC-relative access into constant pool
2358 // basr Z_R14,rx ; end of this instruction must be aligned to a word boundary
2359 //
2360 // Code pattern will eventually get patched into variant2 (see below for detection code).
2361 //
2362 bool MacroAssembler::is_call_far_patchable_variant0_at(address instruction_addr) {
2363 address iaddr = instruction_addr;
2364
2365 // Check for the actual load instruction.
2366 if (!is_load_const_from_toc(iaddr)) { return false; }
2367 iaddr += load_const_from_toc_size();
2368
2369 // Check for the call (BASR) instruction, finally.
2370 assert(iaddr-instruction_addr+call_byregister_size() == call_far_patchable_size(), "size mismatch");
2371 return is_call_byregister(iaddr);
2372 }
2373
2374 // Identify a call_far_patchable instruction: BRASL
2375 //
2376 // Code pattern to suits atomic patching:
2377 // nop ; Optionally, if required for alignment.
2378 // nop ... ; Multiple filler nops to compensate for size difference (variant0 is longer).
2379 // nop ; For code pattern detection: Prepend each BRASL with a nop.
2380 // brasl Z_R14,<reladdr> ; End of code must be 4-byte aligned !
2381 bool MacroAssembler::is_call_far_patchable_variant2_at(address instruction_addr) {
2382 const address call_addr = (address)((intptr_t)instruction_addr + call_far_patchable_size() - call_far_pcrelative_size());
2383
2384 // Check for correct number of leading nops.
2385 address iaddr;
2386 for (iaddr = instruction_addr; iaddr < call_addr; iaddr += nop_size()) {
2387 if (!is_z_nop(iaddr)) { return false; }
2388 }
2389 assert(iaddr == call_addr, "sanity");
2390
2391 // --> Check for call instruction.
2392 if (is_call_far_pcrelative(call_addr)) {
2393 assert(call_addr-instruction_addr+call_far_pcrelative_size() == call_far_patchable_size(), "size mismatch");
2394 return true;
2395 }
2396
2397 return false;
2398 }
2399
2400 // Emit a NOT mt-safely patchable 64 bit absolute call.
2401 // If toc_offset == -2, then the destination of the call (= target) is emitted
2402 // to the constant pool and a runtime_call relocation is added
2403 // to the code buffer.
2404 // If toc_offset != -2, target must already be in the constant pool at
2405 // _ctableStart+toc_offset (a caller can retrieve toc_offset
2406 // from the runtime_call relocation).
2407 // Special handling of emitting to scratch buffer when there is no constant pool.
2408 // Slightly changed code pattern. We emit an additional nop if we would
2409 // not end emitting at a word aligned address. This is to ensure
2410 // an atomically patchable displacement in brasl instructions.
2411 //
2412 // A call_far_patchable comes in different flavors:
2413 // - LARL(CP) / LG(CP) / BR (address in constant pool, access via CP register)
2414 // - LGRL(CP) / BR (address in constant pool, pc-relative accesss)
2415 // - BRASL (relative address of call target coded in instruction)
2416 // All flavors occupy the same amount of space. Length differences are compensated
2417 // by leading nops, such that the instruction sequence always ends at the same
2418 // byte offset. This is required to keep the return offset constant.
2419 // Furthermore, the return address (the end of the instruction sequence) is forced
2420 // to be on a 4-byte boundary. This is required for atomic patching, should we ever
2421 // need to patch the call target of the BRASL flavor.
2422 // RETURN value: false, if no constant pool entry could be allocated, true otherwise.
2423 bool MacroAssembler::call_far_patchable(address target, int64_t tocOffset) {
2424 // Get current pc and ensure word alignment for end of instr sequence.
2425 const address start_pc = pc();
2426 const intptr_t start_off = offset();
2427 assert(!call_far_patchable_requires_alignment_nop(start_pc), "call_far_patchable requires aligned address");
2428 const ptrdiff_t dist = (ptrdiff_t)(target - (start_pc + 2)); // Prepend each BRASL with a nop.
2429 const bool emit_target_to_pool = (tocOffset == -2) && !code_section()->scratch_emit();
2430 const bool emit_relative_call = !emit_target_to_pool &&
2431 RelAddr::is_in_range_of_RelAddr32(dist) &&
2432 ReoptimizeCallSequences &&
2433 !code_section()->scratch_emit();
2434
2435 if (emit_relative_call) {
2436 // Add padding to get the same size as below.
2437 const unsigned int padding = call_far_patchable_size() - call_far_pcrelative_size();
2438 unsigned int current_padding;
2439 for (current_padding = 0; current_padding < padding; current_padding += nop_size()) { z_nop(); }
2440 assert(current_padding == padding, "sanity");
2441
2442 // relative call: len = 2(nop) + 6 (brasl)
2443 // CodeBlob resize cannot occur in this case because
2444 // this call is emitted into pre-existing space.
2445 z_nop(); // Prepend each BRASL with a nop.
2446 z_brasl(Z_R14, target);
2447 } else {
2448 // absolute call: Get address from TOC.
2449 // len = (load TOC){6|0} + (load from TOC){6} + (basr){2} = {14|8}
2450 if (emit_target_to_pool) {
2451 // When emitting the call for the first time, we do not need to use
2452 // the pc-relative version. It will be patched anyway, when the code
2453 // buffer is copied.
2454 // Relocation is not needed when !ReoptimizeCallSequences.
2455 relocInfo::relocType rt = ReoptimizeCallSequences ? relocInfo::runtime_call_w_cp_type : relocInfo::none;
2456 AddressLiteral dest(target, rt);
2457 // Store_oop_in_toc() adds dest to the constant table. As side effect, this kills
2458 // inst_mark(). Reset if possible.
2459 bool reset_mark = (inst_mark() == pc());
2460 tocOffset = store_oop_in_toc(dest);
2461 if (reset_mark) { set_inst_mark(); }
2462 if (tocOffset == -1) {
2463 return false; // Couldn't create constant pool entry.
2464 }
2465 }
2466 assert(offset() == start_off, "emit no code before this point!");
2467
2468 address tocPos = pc() + tocOffset;
2469 if (emit_target_to_pool) {
2470 tocPos = code()->consts()->start() + tocOffset;
2471 }
2472 load_long_pcrelative(Z_R14, tocPos);
2473 z_basr(Z_R14, Z_R14);
2474 }
2475
2476 #ifdef ASSERT
2477 // Assert that we can identify the emitted call.
2478 assert(is_call_far_patchable_at(addr_at(start_off)), "can't identify emitted call");
2479 assert(offset() == start_off+call_far_patchable_size(), "wrong size");
2480
2481 if (emit_target_to_pool) {
2482 assert(get_dest_of_call_far_patchable_at(addr_at(start_off), code()->consts()->start()) == target,
2483 "wrong encoding of dest address");
2484 }
2485 #endif
2486 return true; // success
2487 }
2488
2489 // Identify a call_far_patchable instruction.
2490 // For more detailed information see header comment of call_far_patchable.
2491 bool MacroAssembler::is_call_far_patchable_at(address instruction_addr) {
2492 return is_call_far_patchable_variant2_at(instruction_addr) || // short version: BRASL
2493 is_call_far_patchable_variant0_at(instruction_addr); // long version LARL + LG + BASR
2494 }
2495
2496 // Does the call_far_patchable instruction use a pc-relative encoding
2497 // of the call destination?
2498 bool MacroAssembler::is_call_far_patchable_pcrelative_at(address instruction_addr) {
2499 // Variant 2 is pc-relative.
2500 return is_call_far_patchable_variant2_at(instruction_addr);
2501 }
2502
2503 bool MacroAssembler::is_call_far_pcrelative(address instruction_addr) {
2504 // Prepend each BRASL with a nop.
2505 return is_z_nop(instruction_addr) && is_z_brasl(instruction_addr + nop_size()); // Match at position after one nop required.
2506 }
2507
2508 // Set destination address of a call_far_patchable instruction.
2509 void MacroAssembler::set_dest_of_call_far_patchable_at(address instruction_addr, address dest, int64_t tocOffset) {
2510 ResourceMark rm;
2511
2512 // Now that CP entry is verified, patch call to a pc-relative call (if circumstances permit).
2513 int code_size = MacroAssembler::call_far_patchable_size();
2514 CodeBuffer buf(instruction_addr, code_size);
2515 MacroAssembler masm(&buf);
2516 masm.call_far_patchable(dest, tocOffset);
2517 ICache::invalidate_range(instruction_addr, code_size); // Empty on z.
2518 }
2519
2520 // Get dest address of a call_far_patchable instruction.
2521 address MacroAssembler::get_dest_of_call_far_patchable_at(address instruction_addr, address ctable) {
2522 // Dynamic TOC: absolute address in constant pool.
2523 // Check variant2 first, it is more frequent.
2524
2525 // Relative address encoded in call instruction.
2526 if (is_call_far_patchable_variant2_at(instruction_addr)) {
2527 return MacroAssembler::get_target_addr_pcrel(instruction_addr + nop_size()); // Prepend each BRASL with a nop.
2528
2529 // Absolute address in constant pool.
2530 } else if (is_call_far_patchable_variant0_at(instruction_addr)) {
2531 address iaddr = instruction_addr;
2532
2533 long tocOffset = get_load_const_from_toc_offset(iaddr);
2534 address tocLoc = iaddr + tocOffset;
2535 return *(address *)(tocLoc);
2536 } else {
2537 fprintf(stderr, "MacroAssembler::get_dest_of_call_far_patchable_at has a problem at %p:\n", instruction_addr);
2538 fprintf(stderr, "not a call_far_patchable: %16.16lx %16.16lx, len = %d\n",
2539 *(unsigned long*)instruction_addr,
2540 *(unsigned long*)(instruction_addr+8),
2541 call_far_patchable_size());
2542 Disassembler::decode(instruction_addr, instruction_addr+call_far_patchable_size());
2543 ShouldNotReachHere();
2544 return NULL;
2545 }
2546 }
2547
2548 void MacroAssembler::align_call_far_patchable(address pc) {
2549 if (call_far_patchable_requires_alignment_nop(pc)) { z_nop(); }
2550 }
2551
2552 void MacroAssembler::check_and_handle_earlyret(Register java_thread) {
2553 }
2554
2555 void MacroAssembler::check_and_handle_popframe(Register java_thread) {
2556 }
2557
2558 // Read from the polling page.
2559 // Use TM or TMY instruction, depending on read offset.
2560 // offset = 0: Use TM, safepoint polling.
2561 // offset < 0: Use TMY, profiling safepoint polling.
2562 void MacroAssembler::load_from_polling_page(Register polling_page_address, int64_t offset) {
2563 if (Immediate::is_uimm12(offset)) {
2564 z_tm(offset, polling_page_address, mask_safepoint);
2565 } else {
2566 z_tmy(offset, polling_page_address, mask_profiling);
2567 }
2568 }
2569
2570 // Check whether z_instruction is a read access to the polling page
2571 // which was emitted by load_from_polling_page(..).
2572 bool MacroAssembler::is_load_from_polling_page(address instr_loc) {
2573 unsigned long z_instruction;
2574 unsigned int ilen = get_instruction(instr_loc, &z_instruction);
2575
2576 if (ilen == 2) { return false; } // It's none of the allowed instructions.
2577
2578 if (ilen == 4) {
2579 if (!is_z_tm(z_instruction)) { return false; } // It's len=4, but not a z_tm. fail.
2580
2581 int ms = inv_mask(z_instruction,8,32); // mask
2582 int ra = inv_reg(z_instruction,16,32); // base register
2583 int ds = inv_uimm12(z_instruction); // displacement
2584
2585 if (!(ds == 0 && ra != 0 && ms == mask_safepoint)) {
2586 return false; // It's not a z_tm(0, ra, mask_safepoint). Fail.
2587 }
2588
2589 } else { /* if (ilen == 6) */
2590
2591 assert(!is_z_lg(z_instruction), "old form (LG) polling page access. Please fix and use TM(Y).");
2592
2593 if (!is_z_tmy(z_instruction)) { return false; } // It's len=6, but not a z_tmy. fail.
2594
2595 int ms = inv_mask(z_instruction,8,48); // mask
2596 int ra = inv_reg(z_instruction,16,48); // base register
2597 int ds = inv_simm20(z_instruction); // displacement
2598 }
2599
2600 return true;
2601 }
2602
2603 // Extract poll address from instruction and ucontext.
2604 address MacroAssembler::get_poll_address(address instr_loc, void* ucontext) {
2605 assert(ucontext != NULL, "must have ucontext");
2606 ucontext_t* uc = (ucontext_t*) ucontext;
2607 unsigned long z_instruction;
2608 unsigned int ilen = get_instruction(instr_loc, &z_instruction);
2609
2610 if (ilen == 4 && is_z_tm(z_instruction)) {
2611 int ra = inv_reg(z_instruction, 16, 32); // base register
2612 int ds = inv_uimm12(z_instruction); // displacement
2613 address addr = (address)uc->uc_mcontext.gregs[ra];
2614 return addr + ds;
2615 } else if (ilen == 6 && is_z_tmy(z_instruction)) {
2616 int ra = inv_reg(z_instruction, 16, 48); // base register
2617 int ds = inv_simm20(z_instruction); // displacement
2618 address addr = (address)uc->uc_mcontext.gregs[ra];
2619 return addr + ds;
2620 }
2621
2622 ShouldNotReachHere();
2623 return NULL;
2624 }
2625
2626 // Extract poll register from instruction.
2627 uint MacroAssembler::get_poll_register(address instr_loc) {
2628 unsigned long z_instruction;
2629 unsigned int ilen = get_instruction(instr_loc, &z_instruction);
2630
2631 if (ilen == 4 && is_z_tm(z_instruction)) {
2632 return (uint)inv_reg(z_instruction, 16, 32); // base register
2633 } else if (ilen == 6 && is_z_tmy(z_instruction)) {
2634 return (uint)inv_reg(z_instruction, 16, 48); // base register
2635 }
2636
2637 ShouldNotReachHere();
2638 return 0;
2639 }
2640
2641 bool MacroAssembler::is_memory_serialization(int instruction, JavaThread* thread, void* ucontext) {
2642 ShouldNotCallThis();
2643 return false;
2644 }
2645
2646 // Write serialization page so VM thread can do a pseudo remote membar
2647 // We use the current thread pointer to calculate a thread specific
2648 // offset to write to within the page. This minimizes bus traffic
2649 // due to cache line collision.
2650 void MacroAssembler::serialize_memory(Register thread, Register tmp1, Register tmp2) {
2651 assert_different_registers(tmp1, tmp2);
2652 z_sllg(tmp2, thread, os::get_serialize_page_shift_count());
2653 load_const_optimized(tmp1, (long) os::get_memory_serialize_page());
2654
2655 int mask = os::get_serialize_page_mask();
2656 if (Immediate::is_uimm16(mask)) {
2657 z_nill(tmp2, mask);
2658 z_llghr(tmp2, tmp2);
2659 } else {
2660 z_nilf(tmp2, mask);
2661 z_llgfr(tmp2, tmp2);
2662 }
2663
2664 z_release();
2665 z_st(Z_R0, 0, tmp2, tmp1);
2666 }
2667
2668 // Don't rely on register locking, always use Z_R1 as scratch register instead.
2669 void MacroAssembler::bang_stack_with_offset(int offset) {
2670 // Stack grows down, caller passes positive offset.
2671 assert(offset > 0, "must bang with positive offset");
2672 if (Displacement::is_validDisp(-offset)) {
2673 z_tmy(-offset, Z_SP, mask_stackbang);
2674 } else {
2675 add2reg(Z_R1, -offset, Z_SP); // Do not destroy Z_SP!!!
2676 z_tm(0, Z_R1, mask_stackbang); // Just banging.
2677 }
2678 }
2679
2680 // Defines obj, preserves var_size_in_bytes, okay for t2 == var_size_in_bytes.
2681 void MacroAssembler::tlab_allocate(Register obj,
2682 Register var_size_in_bytes,
2683 int con_size_in_bytes,
2684 Register t1,
2685 Label& slow_case) {
2686 assert_different_registers(obj, var_size_in_bytes, t1);
2687 Register end = t1;
2688 Register thread = Z_thread;
2689
2690 z_lg(obj, Address(thread, JavaThread::tlab_top_offset()));
2691 if (var_size_in_bytes == noreg) {
2692 z_lay(end, Address(obj, con_size_in_bytes));
2693 } else {
2694 z_lay(end, Address(obj, var_size_in_bytes));
2695 }
2696 z_cg(end, Address(thread, JavaThread::tlab_end_offset()));
2697 branch_optimized(bcondHigh, slow_case);
2698
2699 // Update the tlab top pointer.
2700 z_stg(end, Address(thread, JavaThread::tlab_top_offset()));
2701
2702 // Recover var_size_in_bytes if necessary.
2703 if (var_size_in_bytes == end) {
2704 z_sgr(var_size_in_bytes, obj);
2705 }
2706 }
2707
2708 // Emitter for interface method lookup.
2709 // input: recv_klass, intf_klass, itable_index
2710 // output: method_result
2711 // kills: itable_index, temp1_reg, Z_R0, Z_R1
2712 // TODO: Temp2_reg is unused. we may use this emitter also in the itable stubs.
2713 // If the register is still not needed then, remove it.
2714 void MacroAssembler::lookup_interface_method(Register recv_klass,
2715 Register intf_klass,
2716 RegisterOrConstant itable_index,
2717 Register method_result,
2718 Register temp1_reg,
2719 Register temp2_reg,
2720 Label& no_such_interface) {
2721
2722 const Register vtable_len = temp1_reg; // Used to compute itable_entry_addr.
2723 const Register itable_entry_addr = Z_R1_scratch;
2724 const Register itable_interface = Z_R0_scratch;
2725
2726 BLOCK_COMMENT("lookup_interface_method {");
2727
2728 // Load start of itable entries into itable_entry_addr.
2729 z_llgf(vtable_len, Address(recv_klass, InstanceKlass::vtable_length_offset()));
2730 z_sllg(vtable_len, vtable_len, exact_log2(vtableEntry::size_in_bytes()));
2731
2732 // Loop over all itable entries until desired interfaceOop(Rinterface) found.
2733 const int vtable_base_offset = in_bytes(InstanceKlass::vtable_start_offset());
2734
2735 add2reg_with_index(itable_entry_addr,
2736 vtable_base_offset + itableOffsetEntry::interface_offset_in_bytes(),
2737 recv_klass, vtable_len);
2738
2739 const int itable_offset_search_inc = itableOffsetEntry::size() * wordSize;
2740 Label search;
2741
2742 bind(search);
2743
2744 // Handle IncompatibleClassChangeError.
2745 // If the entry is NULL then we've reached the end of the table
2746 // without finding the expected interface, so throw an exception.
2747 load_and_test_long(itable_interface, Address(itable_entry_addr));
2748 z_bre(no_such_interface);
2749
2750 add2reg(itable_entry_addr, itable_offset_search_inc);
2751 z_cgr(itable_interface, intf_klass);
2752 z_brne(search);
2753
2754 // Entry found and itable_entry_addr points to it, get offset of vtable for interface.
2755
2756 const int vtable_offset_offset = (itableOffsetEntry::offset_offset_in_bytes() -
2757 itableOffsetEntry::interface_offset_in_bytes()) -
2758 itable_offset_search_inc;
2759
2760 // Compute itableMethodEntry and get method and entry point
2761 // we use addressing with index and displacement, since the formula
2762 // for computing the entry's offset has a fixed and a dynamic part,
2763 // the latter depending on the matched interface entry and on the case,
2764 // that the itable index has been passed as a register, not a constant value.
2765 int method_offset = itableMethodEntry::method_offset_in_bytes();
2766 // Fixed part (displacement), common operand.
2767 Register itable_offset; // Dynamic part (index register).
2768
2769 if (itable_index.is_register()) {
2770 // Compute the method's offset in that register, for the formula, see the
2771 // else-clause below.
2772 itable_offset = itable_index.as_register();
2773
2774 z_sllg(itable_offset, itable_offset, exact_log2(itableMethodEntry::size() * wordSize));
2775 z_agf(itable_offset, vtable_offset_offset, itable_entry_addr);
2776 } else {
2777 itable_offset = Z_R1_scratch;
2778 // Displacement increases.
2779 method_offset += itableMethodEntry::size() * wordSize * itable_index.as_constant();
2780
2781 // Load index from itable.
2782 z_llgf(itable_offset, vtable_offset_offset, itable_entry_addr);
2783 }
2784
2785 // Finally load the method's oop.
2786 z_lg(method_result, method_offset, itable_offset, recv_klass);
2787 BLOCK_COMMENT("} lookup_interface_method");
2788 }
2789
2790 // Lookup for virtual method invocation.
2791 void MacroAssembler::lookup_virtual_method(Register recv_klass,
2792 RegisterOrConstant vtable_index,
2793 Register method_result) {
2794 assert_different_registers(recv_klass, vtable_index.register_or_noreg());
2795 assert(vtableEntry::size() * wordSize == wordSize,
2796 "else adjust the scaling in the code below");
2797
2798 BLOCK_COMMENT("lookup_virtual_method {");
2799
2800 const int base = in_bytes(Klass::vtable_start_offset());
2801
2802 if (vtable_index.is_constant()) {
2803 // Load with base + disp.
2804 Address vtable_entry_addr(recv_klass,
2805 vtable_index.as_constant() * wordSize +
2806 base +
2807 vtableEntry::method_offset_in_bytes());
2808
2809 z_lg(method_result, vtable_entry_addr);
2810 } else {
2811 // Shift index properly and load with base + index + disp.
2812 Register vindex = vtable_index.as_register();
2813 Address vtable_entry_addr(recv_klass, vindex,
2814 base + vtableEntry::method_offset_in_bytes());
2815
2816 z_sllg(vindex, vindex, exact_log2(wordSize));
2817 z_lg(method_result, vtable_entry_addr);
2818 }
2819 BLOCK_COMMENT("} lookup_virtual_method");
2820 }
2821
2822 // Factor out code to call ic_miss_handler.
2823 // Generate code to call the inline cache miss handler.
2824 //
2825 // In most cases, this code will be generated out-of-line.
2826 // The method parameters are intended to provide some variability.
2827 // ICM - Label which has to be bound to the start of useful code (past any traps).
2828 // trapMarker - Marking byte for the generated illtrap instructions (if any).
2829 // Any value except 0x00 is supported.
2830 // = 0x00 - do not generate illtrap instructions.
2831 // use nops to fill ununsed space.
2832 // requiredSize - required size of the generated code. If the actually
2833 // generated code is smaller, use padding instructions to fill up.
2834 // = 0 - no size requirement, no padding.
2835 // scratch - scratch register to hold branch target address.
2836 //
2837 // The method returns the code offset of the bound label.
2838 unsigned int MacroAssembler::call_ic_miss_handler(Label& ICM, int trapMarker, int requiredSize, Register scratch) {
2839 intptr_t startOffset = offset();
2840
2841 // Prevent entry at content_begin().
2842 if (trapMarker != 0) {
2843 z_illtrap(trapMarker);
2844 }
2845
2846 // Load address of inline cache miss code into scratch register
2847 // and branch to cache miss handler.
2848 BLOCK_COMMENT("IC miss handler {");
2849 BIND(ICM);
2850 unsigned int labelOffset = offset();
2851 AddressLiteral icmiss(SharedRuntime::get_ic_miss_stub());
2852
2853 load_const_optimized(scratch, icmiss);
2854 z_br(scratch);
2855
2856 // Fill unused space.
2857 if (requiredSize > 0) {
2858 while ((offset() - startOffset) < requiredSize) {
2859 if (trapMarker == 0) {
2860 z_nop();
2861 } else {
2862 z_illtrap(trapMarker);
2863 }
2864 }
2865 }
2866 BLOCK_COMMENT("} IC miss handler");
2867 return labelOffset;
2868 }
2869
2870 void MacroAssembler::nmethod_UEP(Label& ic_miss) {
2871 Register ic_reg = as_Register(Matcher::inline_cache_reg_encode());
2872 int klass_offset = oopDesc::klass_offset_in_bytes();
2873 if (!ImplicitNullChecks || MacroAssembler::needs_explicit_null_check(klass_offset)) {
2874 if (VM_Version::has_CompareBranch()) {
2875 z_cgij(Z_ARG1, 0, Assembler::bcondEqual, ic_miss);
2876 } else {
2877 z_ltgr(Z_ARG1, Z_ARG1);
2878 z_bre(ic_miss);
2879 }
2880 }
2881 // Compare cached class against klass from receiver.
2882 compare_klass_ptr(ic_reg, klass_offset, Z_ARG1, false);
2883 z_brne(ic_miss);
2884 }
2885
2886 void MacroAssembler::check_klass_subtype_fast_path(Register sub_klass,
2887 Register super_klass,
2888 Register temp1_reg,
2889 Label* L_success,
2890 Label* L_failure,
2891 Label* L_slow_path,
2892 RegisterOrConstant super_check_offset) {
2893
2894 const int sc_offset = in_bytes(Klass::secondary_super_cache_offset());
2895 const int sco_offset = in_bytes(Klass::super_check_offset_offset());
2896
2897 bool must_load_sco = (super_check_offset.constant_or_zero() == -1);
2898 bool need_slow_path = (must_load_sco ||
2899 super_check_offset.constant_or_zero() == sc_offset);
2900
2901 // Input registers must not overlap.
2902 assert_different_registers(sub_klass, super_klass, temp1_reg);
2903 if (super_check_offset.is_register()) {
2904 assert_different_registers(sub_klass, super_klass,
2905 super_check_offset.as_register());
2906 } else if (must_load_sco) {
2907 assert(temp1_reg != noreg, "supply either a temp or a register offset");
2908 }
2909
2910 const Register Rsuper_check_offset = temp1_reg;
2911
2912 NearLabel L_fallthrough;
2913 int label_nulls = 0;
2914 if (L_success == NULL) { L_success = &L_fallthrough; label_nulls++; }
2915 if (L_failure == NULL) { L_failure = &L_fallthrough; label_nulls++; }
2916 if (L_slow_path == NULL) { L_slow_path = &L_fallthrough; label_nulls++; }
2917 assert(label_nulls <= 1 ||
2918 (L_slow_path == &L_fallthrough && label_nulls <= 2 && !need_slow_path),
2919 "at most one NULL in the batch, usually");
2920
2921 BLOCK_COMMENT("check_klass_subtype_fast_path {");
2922 // If the pointers are equal, we are done (e.g., String[] elements).
2923 // This self-check enables sharing of secondary supertype arrays among
2924 // non-primary types such as array-of-interface. Otherwise, each such
2925 // type would need its own customized SSA.
2926 // We move this check to the front of the fast path because many
2927 // type checks are in fact trivially successful in this manner,
2928 // so we get a nicely predicted branch right at the start of the check.
2929 compare64_and_branch(sub_klass, super_klass, bcondEqual, *L_success);
2930
2931 // Check the supertype display, which is uint.
2932 if (must_load_sco) {
2933 z_llgf(Rsuper_check_offset, sco_offset, super_klass);
2934 super_check_offset = RegisterOrConstant(Rsuper_check_offset);
2935 }
2936 Address super_check_addr(sub_klass, super_check_offset, 0);
2937 z_cg(super_klass, super_check_addr); // compare w/ displayed supertype
2938
2939 // This check has worked decisively for primary supers.
2940 // Secondary supers are sought in the super_cache ('super_cache_addr').
2941 // (Secondary supers are interfaces and very deeply nested subtypes.)
2942 // This works in the same check above because of a tricky aliasing
2943 // between the super_cache and the primary super display elements.
2944 // (The 'super_check_addr' can address either, as the case requires.)
2945 // Note that the cache is updated below if it does not help us find
2946 // what we need immediately.
2947 // So if it was a primary super, we can just fail immediately.
2948 // Otherwise, it's the slow path for us (no success at this point).
2949
2950 // Hacked jmp, which may only be used just before L_fallthrough.
2951 #define final_jmp(label) \
2952 if (&(label) == &L_fallthrough) { /*do nothing*/ } \
2953 else { branch_optimized(Assembler::bcondAlways, label); } /*omit semicolon*/
2954
2955 if (super_check_offset.is_register()) {
2956 branch_optimized(Assembler::bcondEqual, *L_success);
2957 z_cfi(super_check_offset.as_register(), sc_offset);
2958 if (L_failure == &L_fallthrough) {
2959 branch_optimized(Assembler::bcondEqual, *L_slow_path);
2960 } else {
2961 branch_optimized(Assembler::bcondNotEqual, *L_failure);
2962 final_jmp(*L_slow_path);
2963 }
2964 } else if (super_check_offset.as_constant() == sc_offset) {
2965 // Need a slow path; fast failure is impossible.
2966 if (L_slow_path == &L_fallthrough) {
2967 branch_optimized(Assembler::bcondEqual, *L_success);
2968 } else {
2969 branch_optimized(Assembler::bcondNotEqual, *L_slow_path);
2970 final_jmp(*L_success);
2971 }
2972 } else {
2973 // No slow path; it's a fast decision.
2974 if (L_failure == &L_fallthrough) {
2975 branch_optimized(Assembler::bcondEqual, *L_success);
2976 } else {
2977 branch_optimized(Assembler::bcondNotEqual, *L_failure);
2978 final_jmp(*L_success);
2979 }
2980 }
2981
2982 bind(L_fallthrough);
2983 #undef local_brc
2984 #undef final_jmp
2985 BLOCK_COMMENT("} check_klass_subtype_fast_path");
2986 // fallthru (to slow path)
2987 }
2988
2989 void MacroAssembler::check_klass_subtype_slow_path(Register Rsubklass,
2990 Register Rsuperklass,
2991 Register Rarray_ptr, // tmp
2992 Register Rlength, // tmp
2993 Label* L_success,
2994 Label* L_failure) {
2995 // Input registers must not overlap.
2996 // Also check for R1 which is explicitely used here.
2997 assert_different_registers(Z_R1, Rsubklass, Rsuperklass, Rarray_ptr, Rlength);
2998 NearLabel L_fallthrough, L_loop;
2999 int label_nulls = 0;
3000 if (L_success == NULL) { L_success = &L_fallthrough; label_nulls++; }
3001 if (L_failure == NULL) { L_failure = &L_fallthrough; label_nulls++; }
3002 assert(label_nulls <= 1, "at most one NULL in the batch");
3003
3004 const int ss_offset = in_bytes(Klass::secondary_supers_offset());
3005 const int sc_offset = in_bytes(Klass::secondary_super_cache_offset());
3006
3007 const int length_offset = Array<Klass*>::length_offset_in_bytes();
3008 const int base_offset = Array<Klass*>::base_offset_in_bytes();
3009
3010 // Hacked jmp, which may only be used just before L_fallthrough.
3011 #define final_jmp(label) \
3012 if (&(label) == &L_fallthrough) { /*do nothing*/ } \
3013 else branch_optimized(Assembler::bcondAlways, label) /*omit semicolon*/
3014
3015 NearLabel loop_iterate, loop_count, match;
3016
3017 BLOCK_COMMENT("check_klass_subtype_slow_path {");
3018 z_lg(Rarray_ptr, ss_offset, Rsubklass);
3019
3020 load_and_test_int(Rlength, Address(Rarray_ptr, length_offset));
3021 branch_optimized(Assembler::bcondZero, *L_failure);
3022
3023 // Oops in table are NO MORE compressed.
3024 z_cg(Rsuperklass, base_offset, Rarray_ptr); // Check array element for match.
3025 z_bre(match); // Shortcut for array length = 1.
3026
3027 // No match yet, so we must walk the array's elements.
3028 z_lngfr(Rlength, Rlength);
3029 z_sllg(Rlength, Rlength, LogBytesPerWord); // -#bytes of cache array
3030 z_llill(Z_R1, BytesPerWord); // Set increment/end index.
3031 add2reg(Rlength, 2 * BytesPerWord); // start index = -(n-2)*BytesPerWord
3032 z_slgr(Rarray_ptr, Rlength); // start addr: += (n-2)*BytesPerWord
3033 z_bru(loop_count);
3034
3035 BIND(loop_iterate);
3036 z_cg(Rsuperklass, base_offset, Rlength, Rarray_ptr); // Check array element for match.
3037 z_bre(match);
3038 BIND(loop_count);
3039 z_brxlg(Rlength, Z_R1, loop_iterate);
3040
3041 // Rsuperklass not found among secondary super classes -> failure.
3042 branch_optimized(Assembler::bcondAlways, *L_failure);
3043
3044 // Got a hit. Return success (zero result). Set cache.
3045 // Cache load doesn't happen here. For speed it is directly emitted by the compiler.
3046
3047 BIND(match);
3048
3049 z_stg(Rsuperklass, sc_offset, Rsubklass); // Save result to cache.
3050
3051 final_jmp(*L_success);
3052
3053 // Exit to the surrounding code.
3054 BIND(L_fallthrough);
3055 #undef local_brc
3056 #undef final_jmp
3057 BLOCK_COMMENT("} check_klass_subtype_slow_path");
3058 }
3059
3060 // Emitter for combining fast and slow path.
3061 void MacroAssembler::check_klass_subtype(Register sub_klass,
3062 Register super_klass,
3063 Register temp1_reg,
3064 Register temp2_reg,
3065 Label& L_success) {
3066 NearLabel failure;
3067 BLOCK_COMMENT(err_msg("check_klass_subtype(%s subclass of %s) {", sub_klass->name(), super_klass->name()));
3068 check_klass_subtype_fast_path(sub_klass, super_klass, temp1_reg,
3069 &L_success, &failure, NULL);
3070 check_klass_subtype_slow_path(sub_klass, super_klass,
3071 temp1_reg, temp2_reg, &L_success, NULL);
3072 BIND(failure);
3073 BLOCK_COMMENT("} check_klass_subtype");
3074 }
3075
3076 // Increment a counter at counter_address when the eq condition code is
3077 // set. Kills registers tmp1_reg and tmp2_reg and preserves the condition code.
3078 void MacroAssembler::increment_counter_eq(address counter_address, Register tmp1_reg, Register tmp2_reg) {
3079 Label l;
3080 z_brne(l);
3081 load_const(tmp1_reg, counter_address);
3082 add2mem_32(Address(tmp1_reg), 1, tmp2_reg);
3083 z_cr(tmp1_reg, tmp1_reg); // Set cc to eq.
3084 bind(l);
3085 }
3086
3087 // Semantics are dependent on the slow_case label:
3088 // If the slow_case label is not NULL, failure to biased-lock the object
3089 // transfers control to the location of the slow_case label. If the
3090 // object could be biased-locked, control is transferred to the done label.
3091 // The condition code is unpredictable.
3092 //
3093 // If the slow_case label is NULL, failure to biased-lock the object results
3094 // in a transfer of control to the done label with a condition code of not_equal.
3095 // If the biased-lock could be successfully obtained, control is transfered to
3096 // the done label with a condition code of equal.
3097 // It is mandatory to react on the condition code At the done label.
3098 //
3099 void MacroAssembler::biased_locking_enter(Register obj_reg,
3100 Register mark_reg,
3101 Register temp_reg,
3102 Register temp2_reg, // May be Z_RO!
3103 Label &done,
3104 Label *slow_case) {
3105 assert(UseBiasedLocking, "why call this otherwise?");
3106 assert_different_registers(obj_reg, mark_reg, temp_reg, temp2_reg);
3107
3108 Label cas_label; // Try, if implemented, CAS locking. Fall thru to slow path otherwise.
3109
3110 BLOCK_COMMENT("biased_locking_enter {");
3111
3112 // Biased locking
3113 // See whether the lock is currently biased toward our thread and
3114 // whether the epoch is still valid.
3115 // Note that the runtime guarantees sufficient alignment of JavaThread
3116 // pointers to allow age to be placed into low bits.
3117 assert(markOopDesc::age_shift == markOopDesc::lock_bits + markOopDesc::biased_lock_bits,
3118 "biased locking makes assumptions about bit layout");
3119 z_lr(temp_reg, mark_reg);
3120 z_nilf(temp_reg, markOopDesc::biased_lock_mask_in_place);
3121 z_chi(temp_reg, markOopDesc::biased_lock_pattern);
3122 z_brne(cas_label); // Try cas if object is not biased, i.e. cannot be biased locked.
3123
3124 load_prototype_header(temp_reg, obj_reg);
3125 load_const_optimized(temp2_reg, ~((int) markOopDesc::age_mask_in_place));
3126
3127 z_ogr(temp_reg, Z_thread);
3128 z_xgr(temp_reg, mark_reg);
3129 z_ngr(temp_reg, temp2_reg);
3130 if (PrintBiasedLockingStatistics) {
3131 increment_counter_eq((address) BiasedLocking::biased_lock_entry_count_addr(), mark_reg, temp2_reg);
3132 // Restore mark_reg.
3133 z_lg(mark_reg, oopDesc::mark_offset_in_bytes(), obj_reg);
3134 }
3135 branch_optimized(Assembler::bcondEqual, done); // Biased lock obtained, return success.
3136
3137 Label try_revoke_bias;
3138 Label try_rebias;
3139 Address mark_addr = Address(obj_reg, oopDesc::mark_offset_in_bytes());
3140
3141 //----------------------------------------------------------------------------
3142 // At this point we know that the header has the bias pattern and
3143 // that we are not the bias owner in the current epoch. We need to
3144 // figure out more details about the state of the header in order to
3145 // know what operations can be legally performed on the object's
3146 // header.
3147
3148 // If the low three bits in the xor result aren't clear, that means
3149 // the prototype header is no longer biased and we have to revoke
3150 // the bias on this object.
3151 z_tmll(temp_reg, markOopDesc::biased_lock_mask_in_place);
3152 z_brnaz(try_revoke_bias);
3153
3154 // Biasing is still enabled for this data type. See whether the
3155 // epoch of the current bias is still valid, meaning that the epoch
3156 // bits of the mark word are equal to the epoch bits of the
3157 // prototype header. (Note that the prototype header's epoch bits
3158 // only change at a safepoint.) If not, attempt to rebias the object
3159 // toward the current thread. Note that we must be absolutely sure
3160 // that the current epoch is invalid in order to do this because
3161 // otherwise the manipulations it performs on the mark word are
3162 // illegal.
3163 z_tmll(temp_reg, markOopDesc::epoch_mask_in_place);
3164 z_brnaz(try_rebias);
3165
3166 //----------------------------------------------------------------------------
3167 // The epoch of the current bias is still valid but we know nothing
3168 // about the owner; it might be set or it might be clear. Try to
3169 // acquire the bias of the object using an atomic operation. If this
3170 // fails we will go in to the runtime to revoke the object's bias.
3171 // Note that we first construct the presumed unbiased header so we
3172 // don't accidentally blow away another thread's valid bias.
3173 z_nilf(mark_reg, markOopDesc::biased_lock_mask_in_place | markOopDesc::age_mask_in_place |
3174 markOopDesc::epoch_mask_in_place);
3175 z_lgr(temp_reg, Z_thread);
3176 z_llgfr(mark_reg, mark_reg);
3177 z_ogr(temp_reg, mark_reg);
3178
3179 assert(oopDesc::mark_offset_in_bytes() == 0, "offset of _mark is not 0");
3180
3181 z_csg(mark_reg, temp_reg, 0, obj_reg);
3182
3183 // If the biasing toward our thread failed, this means that
3184 // another thread succeeded in biasing it toward itself and we
3185 // need to revoke that bias. The revocation will occur in the
3186 // interpreter runtime in the slow case.
3187
3188 if (PrintBiasedLockingStatistics) {
3189 increment_counter_eq((address) BiasedLocking::anonymously_biased_lock_entry_count_addr(),
3190 temp_reg, temp2_reg);
3191 }
3192 if (slow_case != NULL) {
3193 branch_optimized(Assembler::bcondNotEqual, *slow_case); // Biased lock not obtained, need to go the long way.
3194 }
3195 branch_optimized(Assembler::bcondAlways, done); // Biased lock status given in condition code.
3196
3197 //----------------------------------------------------------------------------
3198 bind(try_rebias);
3199 // At this point we know the epoch has expired, meaning that the
3200 // current "bias owner", if any, is actually invalid. Under these
3201 // circumstances _only_, we are allowed to use the current header's
3202 // value as the comparison value when doing the cas to acquire the
3203 // bias in the current epoch. In other words, we allow transfer of
3204 // the bias from one thread to another directly in this situation.
3205
3206 z_nilf(mark_reg, markOopDesc::biased_lock_mask_in_place | markOopDesc::age_mask_in_place | markOopDesc::epoch_mask_in_place);
3207 load_prototype_header(temp_reg, obj_reg);
3208 z_llgfr(mark_reg, mark_reg);
3209
3210 z_ogr(temp_reg, Z_thread);
3211
3212 assert(oopDesc::mark_offset_in_bytes() == 0, "offset of _mark is not 0");
3213
3214 z_csg(mark_reg, temp_reg, 0, obj_reg);
3215
3216 // If the biasing toward our thread failed, this means that
3217 // another thread succeeded in biasing it toward itself and we
3218 // need to revoke that bias. The revocation will occur in the
3219 // interpreter runtime in the slow case.
3220
3221 if (PrintBiasedLockingStatistics) {
3222 increment_counter_eq((address) BiasedLocking::rebiased_lock_entry_count_addr(), temp_reg, temp2_reg);
3223 }
3224 if (slow_case != NULL) {
3225 branch_optimized(Assembler::bcondNotEqual, *slow_case); // Biased lock not obtained, need to go the long way.
3226 }
3227 z_bru(done); // Biased lock status given in condition code.
3228
3229 //----------------------------------------------------------------------------
3230 bind(try_revoke_bias);
3231 // The prototype mark in the klass doesn't have the bias bit set any
3232 // more, indicating that objects of this data type are not supposed
3233 // to be biased any more. We are going to try to reset the mark of
3234 // this object to the prototype value and fall through to the
3235 // CAS-based locking scheme. Note that if our CAS fails, it means
3236 // that another thread raced us for the privilege of revoking the
3237 // bias of this particular object, so it's okay to continue in the
3238 // normal locking code.
3239 load_prototype_header(temp_reg, obj_reg);
3240
3241 assert(oopDesc::mark_offset_in_bytes() == 0, "offset of _mark is not 0");
3242
3243 z_csg(mark_reg, temp_reg, 0, obj_reg);
3244
3245 // Fall through to the normal CAS-based lock, because no matter what
3246 // the result of the above CAS, some thread must have succeeded in
3247 // removing the bias bit from the object's header.
3248 if (PrintBiasedLockingStatistics) {
3249 // z_cgr(mark_reg, temp2_reg);
3250 increment_counter_eq((address) BiasedLocking::revoked_lock_entry_count_addr(), temp_reg, temp2_reg);
3251 }
3252
3253 bind(cas_label);
3254 BLOCK_COMMENT("} biased_locking_enter");
3255 }
3256
3257 void MacroAssembler::biased_locking_exit(Register mark_addr, Register temp_reg, Label& done) {
3258 // Check for biased locking unlock case, which is a no-op
3259 // Note: we do not have to check the thread ID for two reasons.
3260 // First, the interpreter checks for IllegalMonitorStateException at
3261 // a higher level. Second, if the bias was revoked while we held the
3262 // lock, the object could not be rebiased toward another thread, so
3263 // the bias bit would be clear.
3264 BLOCK_COMMENT("biased_locking_exit {");
3265
3266 z_lg(temp_reg, 0, mark_addr);
3267 z_nilf(temp_reg, markOopDesc::biased_lock_mask_in_place);
3268
3269 z_chi(temp_reg, markOopDesc::biased_lock_pattern);
3270 z_bre(done);
3271 BLOCK_COMMENT("} biased_locking_exit");
3272 }
3273
3274 void MacroAssembler::compiler_fast_lock_object(Register oop, Register box, Register temp1, Register temp2, bool try_bias) {
3275 Register displacedHeader = temp1;
3276 Register currentHeader = temp1;
3277 Register temp = temp2;
3278 NearLabel done, object_has_monitor;
3279
3280 BLOCK_COMMENT("compiler_fast_lock_object {");
3281
3282 // Load markOop from oop into mark.
3283 z_lg(displacedHeader, 0, oop);
3284
3285 if (try_bias) {
3286 biased_locking_enter(oop, displacedHeader, temp, Z_R0, done);
3287 }
3288
3289 // Handle existing monitor.
3290 if ((EmitSync & 0x01) == 0) {
3291 // The object has an existing monitor iff (mark & monitor_value) != 0.
3292 guarantee(Immediate::is_uimm16(markOopDesc::monitor_value), "must be half-word");
3293 z_lr(temp, displacedHeader);
3294 z_nill(temp, markOopDesc::monitor_value);
3295 z_brne(object_has_monitor);
3296 }
3297
3298 // Set mark to markOop | markOopDesc::unlocked_value.
3299 z_oill(displacedHeader, markOopDesc::unlocked_value);
3300
3301 // Load Compare Value application register.
3302
3303 // Initialize the box (must happen before we update the object mark).
3304 z_stg(displacedHeader, BasicLock::displaced_header_offset_in_bytes(), box);
3305
3306 // Memory Fence (in cmpxchgd)
3307 // Compare object markOop with mark and if equal exchange scratch1 with object markOop.
3308
3309 // If the compare-and-swap succeeded, then we found an unlocked object and we
3310 // have now locked it.
3311 z_csg(displacedHeader, box, 0, oop);
3312 assert(currentHeader==displacedHeader, "must be same register"); // Identified two registers from z/Architecture.
3313 z_bre(done);
3314
3315 // We did not see an unlocked object so try the fast recursive case.
3316
3317 z_sgr(currentHeader, Z_SP);
3318 load_const_optimized(temp, (~(os::vm_page_size()-1) | markOopDesc::lock_mask_in_place));
3319
3320 z_ngr(currentHeader, temp);
3321 // z_brne(done);
3322 // z_release();
3323 z_stg(currentHeader/*==0 or not 0*/, BasicLock::displaced_header_offset_in_bytes(), box);
3324
3325 z_bru(done);
3326
3327 if ((EmitSync & 0x01) == 0) {
3328 Register zero = temp;
3329 Register monitor_tagged = displacedHeader; // Tagged with markOopDesc::monitor_value.
3330 bind(object_has_monitor);
3331 // The object's monitor m is unlocked iff m->owner == NULL,
3332 // otherwise m->owner may contain a thread or a stack address.
3333 //
3334 // Try to CAS m->owner from NULL to current thread.
3335 z_lghi(zero, 0);
3336 // If m->owner is null, then csg succeeds and sets m->owner=THREAD and CR=EQ.
3337 z_csg(zero, Z_thread, OM_OFFSET_NO_MONITOR_VALUE_TAG(owner), monitor_tagged);
3338 // Store a non-null value into the box.
3339 z_stg(box, BasicLock::displaced_header_offset_in_bytes(), box);
3340 #ifdef ASSERT
3341 z_brne(done);
3342 // We've acquired the monitor, check some invariants.
3343 // Invariant 1: _recursions should be 0.
3344 asm_assert_mem8_is_zero(OM_OFFSET_NO_MONITOR_VALUE_TAG(recursions), monitor_tagged,
3345 "monitor->_recursions should be 0", -1);
3346 z_ltgr(zero, zero); // Set CR=EQ.
3347 #endif
3348 }
3349 bind(done);
3350
3351 BLOCK_COMMENT("} compiler_fast_lock_object");
3352 // If locking was successful, CR should indicate 'EQ'.
3353 // The compiler or the native wrapper generates a branch to the runtime call
3354 // _complete_monitor_locking_Java.
3355 }
3356
3357 void MacroAssembler::compiler_fast_unlock_object(Register oop, Register box, Register temp1, Register temp2, bool try_bias) {
3358 Register displacedHeader = temp1;
3359 Register currentHeader = temp2;
3360 Register temp = temp1;
3361 Register monitor = temp2;
3362
3363 Label done, object_has_monitor;
3364
3365 BLOCK_COMMENT("compiler_fast_unlock_object {");
3366
3367 if (try_bias) {
3368 biased_locking_exit(oop, currentHeader, done);
3369 }
3370
3371 // Find the lock address and load the displaced header from the stack.
3372 // if the displaced header is zero, we have a recursive unlock.
3373 load_and_test_long(displacedHeader, Address(box, BasicLock::displaced_header_offset_in_bytes()));
3374 z_bre(done);
3375
3376 // Handle existing monitor.
3377 if ((EmitSync & 0x02) == 0) {
3378 // The object has an existing monitor iff (mark & monitor_value) != 0.
3379 z_lg(currentHeader, oopDesc::mark_offset_in_bytes(), oop);
3380 guarantee(Immediate::is_uimm16(markOopDesc::monitor_value), "must be half-word");
3381 z_nill(currentHeader, markOopDesc::monitor_value);
3382 z_brne(object_has_monitor);
3383 }
3384
3385 // Check if it is still a light weight lock, this is true if we see
3386 // the stack address of the basicLock in the markOop of the object
3387 // copy box to currentHeader such that csg does not kill it.
3388 z_lgr(currentHeader, box);
3389 z_csg(currentHeader, displacedHeader, 0, oop);
3390 z_bru(done); // Csg sets CR as desired.
3391
3392 // Handle existing monitor.
3393 if ((EmitSync & 0x02) == 0) {
3394 bind(object_has_monitor);
3395 z_lg(currentHeader, oopDesc::mark_offset_in_bytes(), oop); // CurrentHeader is tagged with monitor_value set.
3396 load_and_test_long(temp, Address(currentHeader, OM_OFFSET_NO_MONITOR_VALUE_TAG(recursions)));
3397 z_brne(done);
3398 load_and_test_long(temp, Address(currentHeader, OM_OFFSET_NO_MONITOR_VALUE_TAG(owner)));
3399 z_brne(done);
3400 load_and_test_long(temp, Address(currentHeader, OM_OFFSET_NO_MONITOR_VALUE_TAG(EntryList)));
3401 z_brne(done);
3402 load_and_test_long(temp, Address(currentHeader, OM_OFFSET_NO_MONITOR_VALUE_TAG(cxq)));
3403 z_brne(done);
3404 z_release();
3405 z_stg(temp/*=0*/, OM_OFFSET_NO_MONITOR_VALUE_TAG(owner), currentHeader);
3406 }
3407
3408 bind(done);
3409
3410 BLOCK_COMMENT("} compiler_fast_unlock_object");
3411 // flag == EQ indicates success
3412 // flag == NE indicates failure
3413 }
3414
3415 // Write to card table for modification at store_addr - register is destroyed afterwards.
3416 void MacroAssembler::card_write_barrier_post(Register store_addr, Register tmp) {
3417 CardTableModRefBS* bs = (CardTableModRefBS*) Universe::heap()->barrier_set();
3418 assert(bs->kind() == BarrierSet::CardTableForRS ||
3419 bs->kind() == BarrierSet::CardTableExtension, "wrong barrier");
3420 assert_different_registers(store_addr, tmp);
3421 z_srlg(store_addr, store_addr, CardTableModRefBS::card_shift);
3422 load_absolute_address(tmp, (address)bs->byte_map_base);
3423 z_agr(store_addr, tmp);
3424 z_mvi(0, store_addr, 0); // Store byte 0.
3425 }
3426
3427 #if INCLUDE_ALL_GCS
3428
3429 //------------------------------------------------------
3430 // General G1 pre-barrier generator.
3431 // Purpose: record the previous value if it is not null.
3432 // All non-tmps are preserved.
3433 //------------------------------------------------------
3434 void MacroAssembler::g1_write_barrier_pre(Register Robj,
3435 RegisterOrConstant offset,
3436 Register Rpre_val, // Ideally, this is a non-volatile register.
3437 Register Rval, // Will be preserved.
3438 Register Rtmp1, // If Rpre_val is volatile, either Rtmp1
3439 Register Rtmp2, // or Rtmp2 has to be non-volatile..
3440 bool pre_val_needed // Save Rpre_val across runtime call, caller uses it.
3441 ) {
3442 Label callRuntime, filtered;
3443 const int active_offset = in_bytes(JavaThread::satb_mark_queue_offset() + SATBMarkQueue::byte_offset_of_active());
3444 const int buffer_offset = in_bytes(JavaThread::satb_mark_queue_offset() + SATBMarkQueue::byte_offset_of_buf());
3445 const int index_offset = in_bytes(JavaThread::satb_mark_queue_offset() + SATBMarkQueue::byte_offset_of_index());
3446 assert_different_registers(Rtmp1, Rtmp2, Z_R0_scratch); // None of the Rtmp<i> must be Z_R0!!
3447
3448 BLOCK_COMMENT("g1_write_barrier_pre {");
3449
3450 // Is marking active?
3451 // Note: value is loaded for test purposes only. No further use here.
3452 if (in_bytes(SATBMarkQueue::byte_width_of_active()) == 4) {
3453 load_and_test_int(Rtmp1, Address(Z_thread, active_offset));
3454 } else {
3455 guarantee(in_bytes(SATBMarkQueue::byte_width_of_active()) == 1, "Assumption");
3456 load_and_test_byte(Rtmp1, Address(Z_thread, active_offset));
3457 }
3458 z_bre(filtered); // Activity indicator is zero, so there is no marking going on currently.
3459
3460 // Do we need to load the previous value into Rpre_val?
3461 if (Robj != noreg) {
3462 // Load the previous value...
3463 Register ixReg = offset.is_register() ? offset.register_or_noreg() : Z_R0;
3464 if (UseCompressedOops) {
3465 z_llgf(Rpre_val, offset.constant_or_zero(), ixReg, Robj);
3466 } else {
3467 z_lg(Rpre_val, offset.constant_or_zero(), ixReg, Robj);
3468 }
3469 }
3470 assert(Rpre_val != noreg, "must have a real register");
3471
3472 // Is the previous value NULL?
3473 // Note: pre_val is loaded, decompressed and stored (directly or via runtime call).
3474 // Register contents is preserved across runtime call if caller requests to do so.
3475 z_ltgr(Rpre_val, Rpre_val);
3476 z_bre(filtered); // previous value is NULL, so we don't need to record it.
3477
3478 // Decode the oop now. We know it's not NULL.
3479 if (Robj != noreg && UseCompressedOops) {
3480 oop_decoder(Rpre_val, Rpre_val, /*maybeNULL=*/false);
3481 }
3482
3483 // OK, it's not filtered, so we'll need to call enqueue.
3484
3485 // We can store the original value in the thread's buffer
3486 // only if index > 0. Otherwise, we need runtime to handle.
3487 // (The index field is typed as size_t.)
3488 Register Rbuffer = Rtmp1, Rindex = Rtmp2;
3489
3490 z_lg(Rbuffer, buffer_offset, Z_thread);
3491
3492 load_and_test_long(Rindex, Address(Z_thread, index_offset));
3493 z_bre(callRuntime); // If index == 0, goto runtime.
3494
3495 add2reg(Rindex, -wordSize); // Decrement index.
3496 z_stg(Rindex, index_offset, Z_thread);
3497
3498 // Record the previous value.
3499 z_stg(Rpre_val, 0, Rbuffer, Rindex);
3500 z_bru(filtered); // We are done.
3501
3502 Rbuffer = noreg; // end of life
3503 Rindex = noreg; // end of life
3504
3505 bind(callRuntime);
3506
3507 // Save Rpre_val (result) over runtime call.
3508 // Requires Rtmp1, Rtmp2, or Rpre_val to be non-volatile.
3509 Register Rpre_save = Rpre_val;
3510 if (pre_val_needed && Rpre_val->is_volatile()) {
3511 guarantee(!Rtmp1->is_volatile() || !Rtmp2->is_volatile(), "oops!");
3512 Rpre_save = !Rtmp1->is_volatile() ? Rtmp1 : Rtmp2;
3513 }
3514 lgr_if_needed(Rpre_save, Rpre_val);
3515
3516 // Preserve inputs by spilling them into the top frame.
3517 if (Robj != noreg && Robj->is_volatile()) {
3518 z_stg(Robj, Robj->encoding()*BytesPerWord, Z_SP);
3519 }
3520 if (offset.is_register() && offset.as_register()->is_volatile()) {
3521 Register Roff = offset.as_register();
3522 z_stg(Roff, Roff->encoding()*BytesPerWord, Z_SP);
3523 }
3524 if (Rval != noreg && Rval->is_volatile()) {
3525 z_stg(Rval, Rval->encoding()*BytesPerWord, Z_SP);
3526 }
3527
3528 // Push frame to protect top frame with return pc and spilled register values.
3529 save_return_pc();
3530 push_frame_abi160(0); // Will use Z_R0 as tmp on old CPUs.
3531
3532 call_VM_leaf(CAST_FROM_FN_PTR(address, SharedRuntime::g1_wb_pre), Rpre_val, Z_thread);
3533
3534 pop_frame();
3535 restore_return_pc();
3536
3537 // Restore spilled values.
3538 if (Robj != noreg && Robj->is_volatile()) {
3539 z_lg(Robj, Robj->encoding()*BytesPerWord, Z_SP);
3540 }
3541 if (offset.is_register() && offset.as_register()->is_volatile()) {
3542 Register Roff = offset.as_register();
3543 z_lg(Roff, Roff->encoding()*BytesPerWord, Z_SP);
3544 }
3545 if (Rval != noreg && Rval->is_volatile()) {
3546 z_lg(Rval, Rval->encoding()*BytesPerWord, Z_SP);
3547 }
3548
3549 // Restore Rpre_val (result) after runtime call.
3550 lgr_if_needed(Rpre_val, Rpre_save);
3551
3552 bind(filtered);
3553 BLOCK_COMMENT("} g1_write_barrier_pre");
3554 }
3555
3556 // General G1 post-barrier generator.
3557 // Purpose: Store cross-region card.
3558 void MacroAssembler::g1_write_barrier_post(Register Rstore_addr,
3559 Register Rnew_val,
3560 Register Rtmp1,
3561 Register Rtmp2,
3562 Register Rtmp3) {
3563 Label callRuntime, filtered;
3564
3565 assert_different_registers(Rstore_addr, Rnew_val, Rtmp1, Rtmp2); // Most probably, Rnew_val == Rtmp3.
3566
3567 G1SATBCardTableModRefBS* bs = (G1SATBCardTableModRefBS*) Universe::heap()->barrier_set();
3568 assert(bs->kind() == BarrierSet::G1SATBCTLogging, "wrong barrier");
3569
3570 BLOCK_COMMENT("g1_write_barrier_post {");
3571
3572 // Does store cross heap regions?
3573 // It does if the two addresses specify different grain addresses.
3574 if (G1RSBarrierRegionFilter) {
3575 if (VM_Version::has_DistinctOpnds()) {
3576 z_xgrk(Rtmp1, Rstore_addr, Rnew_val);
3577 } else {
3578 z_lgr(Rtmp1, Rstore_addr);
3579 z_xgr(Rtmp1, Rnew_val);
3580 }
3581 z_srag(Rtmp1, Rtmp1, HeapRegion::LogOfHRGrainBytes);
3582 z_bre(filtered);
3583 }
3584
3585 // Crosses regions, storing NULL?
3586 #ifdef ASSERT
3587 z_ltgr(Rnew_val, Rnew_val);
3588 asm_assert_ne("null oop not allowed (G1)", 0x255); // TODO: also on z? Checked by caller on PPC64, so following branch is obsolete:
3589 z_bre(filtered); // Safety net: don't break if we have a NULL oop.
3590 #endif
3591 Rnew_val = noreg; // end of lifetime
3592
3593 // Storing region crossing non-NULL, is card already dirty?
3594 assert(sizeof(*bs->byte_map_base) == sizeof(jbyte), "adjust this code");
3595 assert_different_registers(Rtmp1, Rtmp2, Rtmp3);
3596 // Make sure not to use Z_R0 for any of these registers.
3597 Register Rcard_addr = (Rtmp1 != Z_R0_scratch) ? Rtmp1 : Rtmp3;
3598 Register Rbase = (Rtmp2 != Z_R0_scratch) ? Rtmp2 : Rtmp3;
3599
3600 // calculate address of card
3601 load_const_optimized(Rbase, (address)bs->byte_map_base); // Card table base.
3602 z_srlg(Rcard_addr, Rstore_addr, CardTableModRefBS::card_shift); // Index into card table.
3603 add2reg_with_index(Rcard_addr, 0, Rcard_addr, Rbase); // Explicit calculation needed for cli.
3604 Rbase = noreg; // end of lifetime
3605
3606 // Filter young.
3607 assert((unsigned int)G1SATBCardTableModRefBS::g1_young_card_val() <= 255, "otherwise check this code");
3608 z_cli(0, Rcard_addr, (int)G1SATBCardTableModRefBS::g1_young_card_val());
3609 z_bre(filtered);
3610
3611 // Check the card value. If dirty, we're done.
3612 // This also avoids false sharing of the (already dirty) card.
3613 z_sync(); // Required to support concurrent cleaning.
3614 assert((unsigned int)CardTableModRefBS::dirty_card_val() <= 255, "otherwise check this code");
3615 z_cli(0, Rcard_addr, CardTableModRefBS::dirty_card_val()); // Reload after membar.
3616 z_bre(filtered);
3617
3618 // Storing a region crossing, non-NULL oop, card is clean.
3619 // Dirty card and log.
3620 z_mvi(0, Rcard_addr, CardTableModRefBS::dirty_card_val());
3621
3622 Register Rcard_addr_x = Rcard_addr;
3623 Register Rqueue_index = (Rtmp2 != Z_R0_scratch) ? Rtmp2 : Rtmp1;
3624 Register Rqueue_buf = (Rtmp3 != Z_R0_scratch) ? Rtmp3 : Rtmp1;
3625 const int qidx_off = in_bytes(JavaThread::dirty_card_queue_offset() + SATBMarkQueue::byte_offset_of_index());
3626 const int qbuf_off = in_bytes(JavaThread::dirty_card_queue_offset() + SATBMarkQueue::byte_offset_of_buf());
3627 if ((Rcard_addr == Rqueue_buf) || (Rcard_addr == Rqueue_index)) {
3628 Rcard_addr_x = Z_R0_scratch; // Register shortage. We have to use Z_R0.
3629 }
3630 lgr_if_needed(Rcard_addr_x, Rcard_addr);
3631
3632 load_and_test_long(Rqueue_index, Address(Z_thread, qidx_off));
3633 z_bre(callRuntime); // Index == 0 then jump to runtime.
3634
3635 z_lg(Rqueue_buf, qbuf_off, Z_thread);
3636
3637 add2reg(Rqueue_index, -wordSize); // Decrement index.
3638 z_stg(Rqueue_index, qidx_off, Z_thread);
3639
3640 z_stg(Rcard_addr_x, 0, Rqueue_index, Rqueue_buf); // Store card.
3641 z_bru(filtered);
3642
3643 bind(callRuntime);
3644
3645 // TODO: do we need a frame? Introduced to be on the safe side.
3646 bool needs_frame = true;
3647
3648 // VM call need frame to access(write) O register.
3649 if (needs_frame) {
3650 save_return_pc();
3651 push_frame_abi160(0); // Will use Z_R0 as tmp on old CPUs.
3652 }
3653
3654 // Save the live input values.
3655 call_VM_leaf(CAST_FROM_FN_PTR(address, SharedRuntime::g1_wb_post), Rcard_addr_x, Z_thread);
3656
3657 if (needs_frame) {
3658 pop_frame();
3659 restore_return_pc();
3660 }
3661
3662 bind(filtered);
3663
3664 BLOCK_COMMENT("} g1_write_barrier_post");
3665 }
3666 #endif // INCLUDE_ALL_GCS
3667
3668 // Last_Java_sp must comply to the rules in frame_s390.hpp.
3669 void MacroAssembler::set_last_Java_frame(Register last_Java_sp, Register last_Java_pc, bool allow_relocation) {
3670 BLOCK_COMMENT("set_last_Java_frame {");
3671
3672 // Always set last_Java_pc and flags first because once last_Java_sp
3673 // is visible has_last_Java_frame is true and users will look at the
3674 // rest of the fields. (Note: flags should always be zero before we
3675 // get here so doesn't need to be set.)
3676
3677 // Verify that last_Java_pc was zeroed on return to Java.
3678 if (allow_relocation) {
3679 asm_assert_mem8_is_zero(in_bytes(JavaThread::last_Java_pc_offset()),
3680 Z_thread,
3681 "last_Java_pc not zeroed before leaving Java",
3682 0x200);
3683 } else {
3684 asm_assert_mem8_is_zero_static(in_bytes(JavaThread::last_Java_pc_offset()),
3685 Z_thread,
3686 "last_Java_pc not zeroed before leaving Java",
3687 0x200);
3688 }
3689
3690 // When returning from calling out from Java mode the frame anchor's
3691 // last_Java_pc will always be set to NULL. It is set here so that
3692 // if we are doing a call to native (not VM) that we capture the
3693 // known pc and don't have to rely on the native call having a
3694 // standard frame linkage where we can find the pc.
3695 if (last_Java_pc!=noreg) {
3696 z_stg(last_Java_pc, Address(Z_thread, JavaThread::last_Java_pc_offset()));
3697 }
3698
3699 // This membar release is not required on z/Architecture, since the sequence of stores
3700 // in maintained. Nevertheless, we leave it in to document the required ordering.
3701 // The implementation of z_release() should be empty.
3702 // z_release();
3703
3704 z_stg(last_Java_sp, Address(Z_thread, JavaThread::last_Java_sp_offset()));
3705 BLOCK_COMMENT("} set_last_Java_frame");
3706 }
3707
3708 void MacroAssembler::reset_last_Java_frame(bool allow_relocation) {
3709 BLOCK_COMMENT("reset_last_Java_frame {");
3710
3711 if (allow_relocation) {
3712 asm_assert_mem8_isnot_zero(in_bytes(JavaThread::last_Java_sp_offset()),
3713 Z_thread,
3714 "SP was not set, still zero",
3715 0x202);
3716 } else {
3717 asm_assert_mem8_isnot_zero_static(in_bytes(JavaThread::last_Java_sp_offset()),
3718 Z_thread,
3719 "SP was not set, still zero",
3720 0x202);
3721 }
3722
3723 // _last_Java_sp = 0
3724 // Clearing storage must be atomic here, so don't use clear_mem()!
3725 store_const(Address(Z_thread, JavaThread::last_Java_sp_offset()), 0);
3726
3727 // _last_Java_pc = 0
3728 store_const(Address(Z_thread, JavaThread::last_Java_pc_offset()), 0);
3729
3730 BLOCK_COMMENT("} reset_last_Java_frame");
3731 return;
3732 }
3733
3734 void MacroAssembler::set_top_ijava_frame_at_SP_as_last_Java_frame(Register sp, Register tmp1, bool allow_relocation) {
3735 assert_different_registers(sp, tmp1);
3736
3737 // We cannot trust that code generated by the C++ compiler saves R14
3738 // to z_abi_160.return_pc, because sometimes it spills R14 using stmg at
3739 // z_abi_160.gpr14 (e.g. InterpreterRuntime::_new()).
3740 // Therefore we load the PC into tmp1 and let set_last_Java_frame() save
3741 // it into the frame anchor.
3742 get_PC(tmp1);
3743 set_last_Java_frame(/*sp=*/sp, /*pc=*/tmp1, allow_relocation);
3744 }
3745
3746 void MacroAssembler::set_thread_state(JavaThreadState new_state) {
3747 z_release();
3748
3749 assert(Immediate::is_uimm16(_thread_max_state), "enum value out of range for instruction");
3750 assert(sizeof(JavaThreadState) == sizeof(int), "enum value must have base type int");
3751 store_const(Address(Z_thread, JavaThread::thread_state_offset()), new_state, Z_R0, false);
3752 }
3753
3754 void MacroAssembler::get_vm_result(Register oop_result) {
3755 verify_thread();
3756
3757 z_lg(oop_result, Address(Z_thread, JavaThread::vm_result_offset()));
3758 clear_mem(Address(Z_thread, JavaThread::vm_result_offset()), sizeof(void*));
3759
3760 verify_oop(oop_result);
3761 }
3762
3763 void MacroAssembler::get_vm_result_2(Register result) {
3764 verify_thread();
3765
3766 z_lg(result, Address(Z_thread, JavaThread::vm_result_2_offset()));
3767 clear_mem(Address(Z_thread, JavaThread::vm_result_2_offset()), sizeof(void*));
3768 }
3769
3770 // We require that C code which does not return a value in vm_result will
3771 // leave it undisturbed.
3772 void MacroAssembler::set_vm_result(Register oop_result) {
3773 z_stg(oop_result, Address(Z_thread, JavaThread::vm_result_offset()));
3774 }
3775
3776 // Explicit null checks (used for method handle code).
3777 void MacroAssembler::null_check(Register reg, Register tmp, int64_t offset) {
3778 if (!ImplicitNullChecks) {
3779 NearLabel ok;
3780
3781 compare64_and_branch(reg, (intptr_t) 0, Assembler::bcondNotEqual, ok);
3782
3783 // We just put the address into reg if it was 0 (tmp==Z_R0 is allowed so we can't use it for the address).
3784 address exception_entry = Interpreter::throw_NullPointerException_entry();
3785 load_absolute_address(reg, exception_entry);
3786 z_br(reg);
3787
3788 bind(ok);
3789 } else {
3790 if (needs_explicit_null_check((intptr_t)offset)) {
3791 // Provoke OS NULL exception if reg = NULL by
3792 // accessing M[reg] w/o changing any registers.
3793 z_lg(tmp, 0, reg);
3794 }
3795 // else
3796 // Nothing to do, (later) access of M[reg + offset]
3797 // will provoke OS NULL exception if reg = NULL.
3798 }
3799 }
3800
3801 //-------------------------------------
3802 // Compressed Klass Pointers
3803 //-------------------------------------
3804
3805 // Klass oop manipulations if compressed.
3806 void MacroAssembler::encode_klass_not_null(Register dst, Register src) {
3807 Register current = (src != noreg) ? src : dst; // Klass is in dst if no src provided. (dst == src) also possible.
3808 address base = Universe::narrow_klass_base();
3809 int shift = Universe::narrow_klass_shift();
3810 assert(UseCompressedClassPointers, "only for compressed klass ptrs");
3811
3812 BLOCK_COMMENT("cKlass encoder {");
3813
3814 #ifdef ASSERT
3815 Label ok;
3816 z_tmll(current, KlassAlignmentInBytes-1); // Check alignment.
3817 z_brc(Assembler::bcondAllZero, ok);
3818 // The plain disassembler does not recognize illtrap. It instead displays
3819 // a 32-bit value. Issueing two illtraps assures the disassembler finds
3820 // the proper beginning of the next instruction.
3821 z_illtrap(0xee);
3822 z_illtrap(0xee);
3823 bind(ok);
3824 #endif
3825
3826 if (base != NULL) {
3827 unsigned int base_h = ((unsigned long)base)>>32;
3828 unsigned int base_l = (unsigned int)((unsigned long)base);
3829 if ((base_h != 0) && (base_l == 0) && VM_Version::has_HighWordInstr()) {
3830 lgr_if_needed(dst, current);
3831 z_aih(dst, -((int)base_h)); // Base has no set bits in lower half.
3832 } else if ((base_h == 0) && (base_l != 0)) {
3833 lgr_if_needed(dst, current);
3834 z_agfi(dst, -(int)base_l);
3835 } else {
3836 load_const(Z_R0, base);
3837 lgr_if_needed(dst, current);
3838 z_sgr(dst, Z_R0);
3839 }
3840 current = dst;
3841 }
3842 if (shift != 0) {
3843 assert (LogKlassAlignmentInBytes == shift, "decode alg wrong");
3844 z_srlg(dst, current, shift);
3845 current = dst;
3846 }
3847 lgr_if_needed(dst, current); // Move may be required (if neither base nor shift != 0).
3848
3849 BLOCK_COMMENT("} cKlass encoder");
3850 }
3851
3852 // This function calculates the size of the code generated by
3853 // decode_klass_not_null(register dst, Register src)
3854 // when (Universe::heap() != NULL). Hence, if the instructions
3855 // it generates change, then this method needs to be updated.
3856 int MacroAssembler::instr_size_for_decode_klass_not_null() {
3857 address base = Universe::narrow_klass_base();
3858 int shift_size = Universe::narrow_klass_shift() == 0 ? 0 : 6; /* sllg */
3859 int addbase_size = 0;
3860 assert(UseCompressedClassPointers, "only for compressed klass ptrs");
3861
3862 if (base != NULL) {
3863 unsigned int base_h = ((unsigned long)base)>>32;
3864 unsigned int base_l = (unsigned int)((unsigned long)base);
3865 if ((base_h != 0) && (base_l == 0) && VM_Version::has_HighWordInstr()) {
3866 addbase_size += 6; /* aih */
3867 } else if ((base_h == 0) && (base_l != 0)) {
3868 addbase_size += 6; /* algfi */
3869 } else {
3870 addbase_size += load_const_size();
3871 addbase_size += 4; /* algr */
3872 }
3873 }
3874 #ifdef ASSERT
3875 addbase_size += 10;
3876 addbase_size += 2; // Extra sigill.
3877 #endif
3878 return addbase_size + shift_size;
3879 }
3880
3881 // !!! If the instructions that get generated here change
3882 // then function instr_size_for_decode_klass_not_null()
3883 // needs to get updated.
3884 // This variant of decode_klass_not_null() must generate predictable code!
3885 // The code must only depend on globally known parameters.
3886 void MacroAssembler::decode_klass_not_null(Register dst) {
3887 address base = Universe::narrow_klass_base();
3888 int shift = Universe::narrow_klass_shift();
3889 int beg_off = offset();
3890 assert(UseCompressedClassPointers, "only for compressed klass ptrs");
3891
3892 BLOCK_COMMENT("cKlass decoder (const size) {");
3893
3894 if (shift != 0) { // Shift required?
3895 z_sllg(dst, dst, shift);
3896 }
3897 if (base != NULL) {
3898 unsigned int base_h = ((unsigned long)base)>>32;
3899 unsigned int base_l = (unsigned int)((unsigned long)base);
3900 if ((base_h != 0) && (base_l == 0) && VM_Version::has_HighWordInstr()) {
3901 z_aih(dst, base_h); // Base has no set bits in lower half.
3902 } else if ((base_h == 0) && (base_l != 0)) {
3903 z_algfi(dst, base_l); // Base has no set bits in upper half.
3904 } else {
3905 load_const(Z_R0, base); // Base has set bits everywhere.
3906 z_algr(dst, Z_R0);
3907 }
3908 }
3909
3910 #ifdef ASSERT
3911 Label ok;
3912 z_tmll(dst, KlassAlignmentInBytes-1); // Check alignment.
3913 z_brc(Assembler::bcondAllZero, ok);
3914 // The plain disassembler does not recognize illtrap. It instead displays
3915 // a 32-bit value. Issueing two illtraps assures the disassembler finds
3916 // the proper beginning of the next instruction.
3917 z_illtrap(0xd1);
3918 z_illtrap(0xd1);
3919 bind(ok);
3920 #endif
3921 assert(offset() == beg_off + instr_size_for_decode_klass_not_null(), "Code gen mismatch.");
3922
3923 BLOCK_COMMENT("} cKlass decoder (const size)");
3924 }
3925
3926 // This variant of decode_klass_not_null() is for cases where
3927 // 1) the size of the generated instructions may vary
3928 // 2) the result is (potentially) stored in a register different from the source.
3929 void MacroAssembler::decode_klass_not_null(Register dst, Register src) {
3930 address base = Universe::narrow_klass_base();
3931 int shift = Universe::narrow_klass_shift();
3932 assert(UseCompressedClassPointers, "only for compressed klass ptrs");
3933
3934 BLOCK_COMMENT("cKlass decoder {");
3935
3936 if (src == noreg) src = dst;
3937
3938 if (shift != 0) { // Shift or at least move required?
3939 z_sllg(dst, src, shift);
3940 } else {
3941 lgr_if_needed(dst, src);
3942 }
3943
3944 if (base != NULL) {
3945 unsigned int base_h = ((unsigned long)base)>>32;
3946 unsigned int base_l = (unsigned int)((unsigned long)base);
3947 if ((base_h != 0) && (base_l == 0) && VM_Version::has_HighWordInstr()) {
3948 z_aih(dst, base_h); // Base has not set bits in lower half.
3949 } else if ((base_h == 0) && (base_l != 0)) {
3950 z_algfi(dst, base_l); // Base has no set bits in upper half.
3951 } else {
3952 load_const_optimized(Z_R0, base); // Base has set bits everywhere.
3953 z_algr(dst, Z_R0);
3954 }
3955 }
3956
3957 #ifdef ASSERT
3958 Label ok;
3959 z_tmll(dst, KlassAlignmentInBytes-1); // Check alignment.
3960 z_brc(Assembler::bcondAllZero, ok);
3961 // The plain disassembler does not recognize illtrap. It instead displays
3962 // a 32-bit value. Issueing two illtraps assures the disassembler finds
3963 // the proper beginning of the next instruction.
3964 z_illtrap(0xd2);
3965 z_illtrap(0xd2);
3966 bind(ok);
3967 #endif
3968 BLOCK_COMMENT("} cKlass decoder");
3969 }
3970
3971 void MacroAssembler::load_klass(Register klass, Address mem) {
3972 if (UseCompressedClassPointers) {
3973 z_llgf(klass, mem);
3974 // Attention: no null check here!
3975 decode_klass_not_null(klass);
3976 } else {
3977 z_lg(klass, mem);
3978 }
3979 }
3980
3981 void MacroAssembler::load_klass(Register klass, Register src_oop) {
3982 if (UseCompressedClassPointers) {
3983 z_llgf(klass, oopDesc::klass_offset_in_bytes(), src_oop);
3984 // Attention: no null check here!
3985 decode_klass_not_null(klass);
3986 } else {
3987 z_lg(klass, oopDesc::klass_offset_in_bytes(), src_oop);
3988 }
3989 }
3990
3991 void MacroAssembler::load_prototype_header(Register Rheader, Register Rsrc_oop) {
3992 assert_different_registers(Rheader, Rsrc_oop);
3993 load_klass(Rheader, Rsrc_oop);
3994 z_lg(Rheader, Address(Rheader, Klass::prototype_header_offset()));
3995 }
3996
3997 void MacroAssembler::store_klass(Register klass, Register dst_oop, Register ck) {
3998 if (UseCompressedClassPointers) {
3999 assert_different_registers(dst_oop, klass, Z_R0);
4000 if (ck == noreg) ck = klass;
4001 encode_klass_not_null(ck, klass);
4002 z_st(ck, Address(dst_oop, oopDesc::klass_offset_in_bytes()));
4003 } else {
4004 z_stg(klass, Address(dst_oop, oopDesc::klass_offset_in_bytes()));
4005 }
4006 }
4007
4008 void MacroAssembler::store_klass_gap(Register s, Register d) {
4009 if (UseCompressedClassPointers) {
4010 assert(s != d, "not enough registers");
4011 z_st(s, Address(d, oopDesc::klass_gap_offset_in_bytes()));
4012 }
4013 }
4014
4015 // Compare klass ptr in memory against klass ptr in register.
4016 //
4017 // Rop1 - klass in register, always uncompressed.
4018 // disp - Offset of klass in memory, compressed/uncompressed, depending on runtime flag.
4019 // Rbase - Base address of cKlass in memory.
4020 // maybeNULL - True if Rop1 possibly is a NULL.
4021 void MacroAssembler::compare_klass_ptr(Register Rop1, int64_t disp, Register Rbase, bool maybeNULL) {
4022
4023 BLOCK_COMMENT("compare klass ptr {");
4024
4025 if (UseCompressedClassPointers) {
4026 const int shift = Universe::narrow_klass_shift();
4027 address base = Universe::narrow_klass_base();
4028
4029 assert((shift == 0) || (shift == LogKlassAlignmentInBytes), "cKlass encoder detected bad shift");
4030 assert_different_registers(Rop1, Z_R0);
4031 assert_different_registers(Rop1, Rbase, Z_R1);
4032
4033 // First encode register oop and then compare with cOop in memory.
4034 // This sequence saves an unnecessary cOop load and decode.
4035 if (base == NULL) {
4036 if (shift == 0) {
4037 z_cl(Rop1, disp, Rbase); // Unscaled
4038 } else {
4039 z_srlg(Z_R0, Rop1, shift); // ZeroBased
4040 z_cl(Z_R0, disp, Rbase);
4041 }
4042 } else { // HeapBased
4043 #ifdef ASSERT
4044 bool used_R0 = true;
4045 bool used_R1 = true;
4046 #endif
4047 Register current = Rop1;
4048 Label done;
4049
4050 if (maybeNULL) { // NULL ptr must be preserved!
4051 z_ltgr(Z_R0, current);
4052 z_bre(done);
4053 current = Z_R0;
4054 }
4055
4056 unsigned int base_h = ((unsigned long)base)>>32;
4057 unsigned int base_l = (unsigned int)((unsigned long)base);
4058 if ((base_h != 0) && (base_l == 0) && VM_Version::has_HighWordInstr()) {
4059 lgr_if_needed(Z_R0, current);
4060 z_aih(Z_R0, -((int)base_h)); // Base has no set bits in lower half.
4061 } else if ((base_h == 0) && (base_l != 0)) {
4062 lgr_if_needed(Z_R0, current);
4063 z_agfi(Z_R0, -(int)base_l);
4064 } else {
4065 int pow2_offset = get_oop_base_complement(Z_R1, ((uint64_t)(intptr_t)base));
4066 add2reg_with_index(Z_R0, pow2_offset, Z_R1, Rop1); // Subtract base by adding complement.
4067 }
4068
4069 if (shift != 0) {
4070 z_srlg(Z_R0, Z_R0, shift);
4071 }
4072 bind(done);
4073 z_cl(Z_R0, disp, Rbase);
4074 #ifdef ASSERT
4075 if (used_R0) preset_reg(Z_R0, 0xb05bUL, 2);
4076 if (used_R1) preset_reg(Z_R1, 0xb06bUL, 2);
4077 #endif
4078 }
4079 } else {
4080 z_clg(Rop1, disp, Z_R0, Rbase);
4081 }
4082 BLOCK_COMMENT("} compare klass ptr");
4083 }
4084
4085 //---------------------------
4086 // Compressed oops
4087 //---------------------------
4088
4089 void MacroAssembler::encode_heap_oop(Register oop) {
4090 oop_encoder(oop, oop, true /*maybe null*/);
4091 }
4092
4093 void MacroAssembler::encode_heap_oop_not_null(Register oop) {
4094 oop_encoder(oop, oop, false /*not null*/);
4095 }
4096
4097 // Called with something derived from the oop base. e.g. oop_base>>3.
4098 int MacroAssembler::get_oop_base_pow2_offset(uint64_t oop_base) {
4099 unsigned int oop_base_ll = ((unsigned int)(oop_base >> 0)) & 0xffff;
4100 unsigned int oop_base_lh = ((unsigned int)(oop_base >> 16)) & 0xffff;
4101 unsigned int oop_base_hl = ((unsigned int)(oop_base >> 32)) & 0xffff;
4102 unsigned int oop_base_hh = ((unsigned int)(oop_base >> 48)) & 0xffff;
4103 unsigned int n_notzero_parts = (oop_base_ll == 0 ? 0:1)
4104 + (oop_base_lh == 0 ? 0:1)
4105 + (oop_base_hl == 0 ? 0:1)
4106 + (oop_base_hh == 0 ? 0:1);
4107
4108 assert(oop_base != 0, "This is for HeapBased cOops only");
4109
4110 if (n_notzero_parts != 1) { // Check if oop_base is just a few pages shy of a power of 2.
4111 uint64_t pow2_offset = 0x10000 - oop_base_ll;
4112 if (pow2_offset < 0x8000) { // This might not be necessary.
4113 uint64_t oop_base2 = oop_base + pow2_offset;
4114
4115 oop_base_ll = ((unsigned int)(oop_base2 >> 0)) & 0xffff;
4116 oop_base_lh = ((unsigned int)(oop_base2 >> 16)) & 0xffff;
4117 oop_base_hl = ((unsigned int)(oop_base2 >> 32)) & 0xffff;
4118 oop_base_hh = ((unsigned int)(oop_base2 >> 48)) & 0xffff;
4119 n_notzero_parts = (oop_base_ll == 0 ? 0:1) +
4120 (oop_base_lh == 0 ? 0:1) +
4121 (oop_base_hl == 0 ? 0:1) +
4122 (oop_base_hh == 0 ? 0:1);
4123 if (n_notzero_parts == 1) {
4124 assert(-(int64_t)pow2_offset != (int64_t)-1, "We use -1 to signal uninitialized base register");
4125 return -pow2_offset;
4126 }
4127 }
4128 }
4129 return 0;
4130 }
4131
4132 // If base address is offset from a straight power of two by just a few pages,
4133 // return this offset to the caller for a possible later composite add.
4134 // TODO/FIX: will only work correctly for 4k pages.
4135 int MacroAssembler::get_oop_base(Register Rbase, uint64_t oop_base) {
4136 int pow2_offset = get_oop_base_pow2_offset(oop_base);
4137
4138 load_const_optimized(Rbase, oop_base - pow2_offset); // Best job possible.
4139
4140 return pow2_offset;
4141 }
4142
4143 int MacroAssembler::get_oop_base_complement(Register Rbase, uint64_t oop_base) {
4144 int offset = get_oop_base(Rbase, oop_base);
4145 z_lcgr(Rbase, Rbase);
4146 return -offset;
4147 }
4148
4149 // Compare compressed oop in memory against oop in register.
4150 // Rop1 - Oop in register.
4151 // disp - Offset of cOop in memory.
4152 // Rbase - Base address of cOop in memory.
4153 // maybeNULL - True if Rop1 possibly is a NULL.
4154 // maybeNULLtarget - Branch target for Rop1 == NULL, if flow control shall NOT continue with compare instruction.
4155 void MacroAssembler::compare_heap_oop(Register Rop1, Address mem, bool maybeNULL) {
4156 Register Rbase = mem.baseOrR0();
4157 Register Rindex = mem.indexOrR0();
4158 int64_t disp = mem.disp();
4159
4160 const int shift = Universe::narrow_oop_shift();
4161 address base = Universe::narrow_oop_base();
4162
4163 assert(UseCompressedOops, "must be on to call this method");
4164 assert(Universe::heap() != NULL, "java heap must be initialized to call this method");
4165 assert((shift == 0) || (shift == LogMinObjAlignmentInBytes), "cOop encoder detected bad shift");
4166 assert_different_registers(Rop1, Z_R0);
4167 assert_different_registers(Rop1, Rbase, Z_R1);
4168 assert_different_registers(Rop1, Rindex, Z_R1);
4169
4170 BLOCK_COMMENT("compare heap oop {");
4171
4172 // First encode register oop and then compare with cOop in memory.
4173 // This sequence saves an unnecessary cOop load and decode.
4174 if (base == NULL) {
4175 if (shift == 0) {
4176 z_cl(Rop1, disp, Rindex, Rbase); // Unscaled
4177 } else {
4178 z_srlg(Z_R0, Rop1, shift); // ZeroBased
4179 z_cl(Z_R0, disp, Rindex, Rbase);
4180 }
4181 } else { // HeapBased
4182 #ifdef ASSERT
4183 bool used_R0 = true;
4184 bool used_R1 = true;
4185 #endif
4186 Label done;
4187 int pow2_offset = get_oop_base_complement(Z_R1, ((uint64_t)(intptr_t)base));
4188
4189 if (maybeNULL) { // NULL ptr must be preserved!
4190 z_ltgr(Z_R0, Rop1);
4191 z_bre(done);
4192 }
4193
4194 add2reg_with_index(Z_R0, pow2_offset, Z_R1, Rop1);
4195 z_srlg(Z_R0, Z_R0, shift);
4196
4197 bind(done);
4198 z_cl(Z_R0, disp, Rindex, Rbase);
4199 #ifdef ASSERT
4200 if (used_R0) preset_reg(Z_R0, 0xb05bUL, 2);
4201 if (used_R1) preset_reg(Z_R1, 0xb06bUL, 2);
4202 #endif
4203 }
4204 BLOCK_COMMENT("} compare heap oop");
4205 }
4206
4207 // Load heap oop and decompress, if necessary.
4208 void MacroAssembler::load_heap_oop(Register dest, const Address &a) {
4209 if (UseCompressedOops) {
4210 z_llgf(dest, a.disp(), a.indexOrR0(), a.baseOrR0());
4211 oop_decoder(dest, dest, true);
4212 } else {
4213 z_lg(dest, a.disp(), a.indexOrR0(), a.baseOrR0());
4214 }
4215 }
4216
4217 // Load heap oop and decompress, if necessary.
4218 void MacroAssembler::load_heap_oop(Register dest, int64_t disp, Register base) {
4219 if (UseCompressedOops) {
4220 z_llgf(dest, disp, base);
4221 oop_decoder(dest, dest, true);
4222 } else {
4223 z_lg(dest, disp, base);
4224 }
4225 }
4226
4227 // Load heap oop and decompress, if necessary.
4228 void MacroAssembler::load_heap_oop_not_null(Register dest, int64_t disp, Register base) {
4229 if (UseCompressedOops) {
4230 z_llgf(dest, disp, base);
4231 oop_decoder(dest, dest, false);
4232 } else {
4233 z_lg(dest, disp, base);
4234 }
4235 }
4236
4237 // Compress, if necessary, and store oop to heap.
4238 void MacroAssembler::store_heap_oop(Register Roop, RegisterOrConstant offset, Register base) {
4239 Register Ridx = offset.is_register() ? offset.register_or_noreg() : Z_R0;
4240 if (UseCompressedOops) {
4241 assert_different_registers(Roop, offset.register_or_noreg(), base);
4242 encode_heap_oop(Roop);
4243 z_st(Roop, offset.constant_or_zero(), Ridx, base);
4244 } else {
4245 z_stg(Roop, offset.constant_or_zero(), Ridx, base);
4246 }
4247 }
4248
4249 // Compress, if necessary, and store oop to heap. Oop is guaranteed to be not NULL.
4250 void MacroAssembler::store_heap_oop_not_null(Register Roop, RegisterOrConstant offset, Register base) {
4251 Register Ridx = offset.is_register() ? offset.register_or_noreg() : Z_R0;
4252 if (UseCompressedOops) {
4253 assert_different_registers(Roop, offset.register_or_noreg(), base);
4254 encode_heap_oop_not_null(Roop);
4255 z_st(Roop, offset.constant_or_zero(), Ridx, base);
4256 } else {
4257 z_stg(Roop, offset.constant_or_zero(), Ridx, base);
4258 }
4259 }
4260
4261 // Store NULL oop to heap.
4262 void MacroAssembler::store_heap_oop_null(Register zero, RegisterOrConstant offset, Register base) {
4263 Register Ridx = offset.is_register() ? offset.register_or_noreg() : Z_R0;
4264 if (UseCompressedOops) {
4265 z_st(zero, offset.constant_or_zero(), Ridx, base);
4266 } else {
4267 z_stg(zero, offset.constant_or_zero(), Ridx, base);
4268 }
4269 }
4270
4271 //-------------------------------------------------
4272 // Encode compressed oop. Generally usable encoder.
4273 //-------------------------------------------------
4274 // Rsrc - contains regular oop on entry. It remains unchanged.
4275 // Rdst - contains compressed oop on exit.
4276 // Rdst and Rsrc may indicate same register, in which case Rsrc does not remain unchanged.
4277 //
4278 // Rdst must not indicate scratch register Z_R1 (Z_R1_scratch) for functionality.
4279 // Rdst should not indicate scratch register Z_R0 (Z_R0_scratch) for performance.
4280 //
4281 // only32bitValid is set, if later code only uses the lower 32 bits. In this
4282 // case we must not fix the upper 32 bits.
4283 void MacroAssembler::oop_encoder(Register Rdst, Register Rsrc, bool maybeNULL,
4284 Register Rbase, int pow2_offset, bool only32bitValid) {
4285
4286 const address oop_base = Universe::narrow_oop_base();
4287 const int oop_shift = Universe::narrow_oop_shift();
4288 const bool disjoint = Universe::narrow_oop_base_disjoint();
4289
4290 assert(UseCompressedOops, "must be on to call this method");
4291 assert(Universe::heap() != NULL, "java heap must be initialized to call this encoder");
4292 assert((oop_shift == 0) || (oop_shift == LogMinObjAlignmentInBytes), "cOop encoder detected bad shift");
4293
4294 if (disjoint || (oop_base == NULL)) {
4295 BLOCK_COMMENT("cOop encoder zeroBase {");
4296 if (oop_shift == 0) {
4297 if (oop_base != NULL && !only32bitValid) {
4298 z_llgfr(Rdst, Rsrc); // Clear upper bits in case the register will be decoded again.
4299 } else {
4300 lgr_if_needed(Rdst, Rsrc);
4301 }
4302 } else {
4303 z_srlg(Rdst, Rsrc, oop_shift);
4304 if (oop_base != NULL && !only32bitValid) {
4305 z_llgfr(Rdst, Rdst); // Clear upper bits in case the register will be decoded again.
4306 }
4307 }
4308 BLOCK_COMMENT("} cOop encoder zeroBase");
4309 return;
4310 }
4311
4312 bool used_R0 = false;
4313 bool used_R1 = false;
4314
4315 BLOCK_COMMENT("cOop encoder general {");
4316 assert_different_registers(Rdst, Z_R1);
4317 assert_different_registers(Rsrc, Rbase);
4318 if (maybeNULL) {
4319 Label done;
4320 // We reorder shifting and subtracting, so that we can compare
4321 // and shift in parallel:
4322 //
4323 // cycle 0: potential LoadN, base = <const>
4324 // cycle 1: base = !base dst = src >> 3, cmp cr = (src != 0)
4325 // cycle 2: if (cr) br, dst = dst + base + offset
4326
4327 // Get oop_base components.
4328 if (pow2_offset == -1) {
4329 if (Rdst == Rbase) {
4330 if (Rdst == Z_R1 || Rsrc == Z_R1) {
4331 Rbase = Z_R0;
4332 used_R0 = true;
4333 } else {
4334 Rdst = Z_R1;
4335 used_R1 = true;
4336 }
4337 }
4338 if (Rbase == Z_R1) {
4339 used_R1 = true;
4340 }
4341 pow2_offset = get_oop_base_complement(Rbase, ((uint64_t)(intptr_t)oop_base) >> oop_shift);
4342 }
4343 assert_different_registers(Rdst, Rbase);
4344
4345 // Check for NULL oop (must be left alone) and shift.
4346 if (oop_shift != 0) { // Shift out alignment bits
4347 if (((intptr_t)oop_base&0xc000000000000000L) == 0L) { // We are sure: no single address will have the leftmost bit set.
4348 z_srag(Rdst, Rsrc, oop_shift); // Arithmetic shift sets the condition code.
4349 } else {
4350 z_srlg(Rdst, Rsrc, oop_shift);
4351 z_ltgr(Rsrc, Rsrc); // This is the recommended way of testing for zero.
4352 // This probably is faster, as it does not write a register. No!
4353 // z_cghi(Rsrc, 0);
4354 }
4355 } else {
4356 z_ltgr(Rdst, Rsrc); // Move NULL to result register.
4357 }
4358 z_bre(done);
4359
4360 // Subtract oop_base components.
4361 if ((Rdst == Z_R0) || (Rbase == Z_R0)) {
4362 z_algr(Rdst, Rbase);
4363 if (pow2_offset != 0) { add2reg(Rdst, pow2_offset); }
4364 } else {
4365 add2reg_with_index(Rdst, pow2_offset, Rbase, Rdst);
4366 }
4367 if (!only32bitValid) {
4368 z_llgfr(Rdst, Rdst); // Clear upper bits in case the register will be decoded again.
4369 }
4370 bind(done);
4371
4372 } else { // not null
4373 // Get oop_base components.
4374 if (pow2_offset == -1) {
4375 pow2_offset = get_oop_base_complement(Rbase, (uint64_t)(intptr_t)oop_base);
4376 }
4377
4378 // Subtract oop_base components and shift.
4379 if (Rdst == Z_R0 || Rsrc == Z_R0 || Rbase == Z_R0) {
4380 // Don't use lay instruction.
4381 if (Rdst == Rsrc) {
4382 z_algr(Rdst, Rbase);
4383 } else {
4384 lgr_if_needed(Rdst, Rbase);
4385 z_algr(Rdst, Rsrc);
4386 }
4387 if (pow2_offset != 0) add2reg(Rdst, pow2_offset);
4388 } else {
4389 add2reg_with_index(Rdst, pow2_offset, Rbase, Rsrc);
4390 }
4391 if (oop_shift != 0) { // Shift out alignment bits.
4392 z_srlg(Rdst, Rdst, oop_shift);
4393 }
4394 if (!only32bitValid) {
4395 z_llgfr(Rdst, Rdst); // Clear upper bits in case the register will be decoded again.
4396 }
4397 }
4398 #ifdef ASSERT
4399 if (used_R0 && Rdst != Z_R0 && Rsrc != Z_R0) { preset_reg(Z_R0, 0xb01bUL, 2); }
4400 if (used_R1 && Rdst != Z_R1 && Rsrc != Z_R1) { preset_reg(Z_R1, 0xb02bUL, 2); }
4401 #endif
4402 BLOCK_COMMENT("} cOop encoder general");
4403 }
4404
4405 //-------------------------------------------------
4406 // decode compressed oop. Generally usable decoder.
4407 //-------------------------------------------------
4408 // Rsrc - contains compressed oop on entry.
4409 // Rdst - contains regular oop on exit.
4410 // Rdst and Rsrc may indicate same register.
4411 // Rdst must not be the same register as Rbase, if Rbase was preloaded (before call).
4412 // Rdst can be the same register as Rbase. Then, either Z_R0 or Z_R1 must be available as scratch.
4413 // Rbase - register to use for the base
4414 // pow2_offset - offset of base to nice value. If -1, base must be loaded.
4415 // For performance, it is good to
4416 // - avoid Z_R0 for any of the argument registers.
4417 // - keep Rdst and Rsrc distinct from Rbase. Rdst == Rsrc is ok for performance.
4418 // - avoid Z_R1 for Rdst if Rdst == Rbase.
4419 void MacroAssembler::oop_decoder(Register Rdst, Register Rsrc, bool maybeNULL, Register Rbase, int pow2_offset) {
4420
4421 const address oop_base = Universe::narrow_oop_base();
4422 const int oop_shift = Universe::narrow_oop_shift();
4423 const bool disjoint = Universe::narrow_oop_base_disjoint();
4424
4425 assert(UseCompressedOops, "must be on to call this method");
4426 assert(Universe::heap() != NULL, "java heap must be initialized to call this decoder");
4427 assert((oop_shift == 0) || (oop_shift == LogMinObjAlignmentInBytes),
4428 "cOop encoder detected bad shift");
4429
4430 // cOops are always loaded zero-extended from memory. No explicit zero-extension necessary.
4431
4432 if (oop_base != NULL) {
4433 unsigned int oop_base_hl = ((unsigned int)((uint64_t)(intptr_t)oop_base >> 32)) & 0xffff;
4434 unsigned int oop_base_hh = ((unsigned int)((uint64_t)(intptr_t)oop_base >> 48)) & 0xffff;
4435 unsigned int oop_base_hf = ((unsigned int)((uint64_t)(intptr_t)oop_base >> 32)) & 0xFFFFffff;
4436 if (disjoint && (oop_base_hl == 0 || oop_base_hh == 0)) {
4437 BLOCK_COMMENT("cOop decoder disjointBase {");
4438 // We do not need to load the base. Instead, we can install the upper bits
4439 // with an OR instead of an ADD.
4440 Label done;
4441
4442 // Rsrc contains a narrow oop. Thus we are sure the leftmost <oop_shift> bits will never be set.
4443 if (maybeNULL) { // NULL ptr must be preserved!
4444 z_slag(Rdst, Rsrc, oop_shift); // Arithmetic shift sets the condition code.
4445 z_bre(done);
4446 } else {
4447 z_sllg(Rdst, Rsrc, oop_shift); // Logical shift leaves condition code alone.
4448 }
4449 if ((oop_base_hl != 0) && (oop_base_hh != 0)) {
4450 z_oihf(Rdst, oop_base_hf);
4451 } else if (oop_base_hl != 0) {
4452 z_oihl(Rdst, oop_base_hl);
4453 } else {
4454 assert(oop_base_hh != 0, "not heapbased mode");
4455 z_oihh(Rdst, oop_base_hh);
4456 }
4457 bind(done);
4458 BLOCK_COMMENT("} cOop decoder disjointBase");
4459 } else {
4460 BLOCK_COMMENT("cOop decoder general {");
4461 // There are three decode steps:
4462 // scale oop offset (shift left)
4463 // get base (in reg) and pow2_offset (constant)
4464 // add base, pow2_offset, and oop offset
4465 // The following register overlap situations may exist:
4466 // Rdst == Rsrc, Rbase any other
4467 // not a problem. Scaling in-place leaves Rbase undisturbed.
4468 // Loading Rbase does not impact the scaled offset.
4469 // Rdst == Rbase, Rsrc any other
4470 // scaling would destroy a possibly preloaded Rbase. Loading Rbase
4471 // would destroy the scaled offset.
4472 // Remedy: use Rdst_tmp if Rbase has been preloaded.
4473 // use Rbase_tmp if base has to be loaded.
4474 // Rsrc == Rbase, Rdst any other
4475 // Only possible without preloaded Rbase.
4476 // Loading Rbase does not destroy compressed oop because it was scaled into Rdst before.
4477 // Rsrc == Rbase, Rdst == Rbase
4478 // Only possible without preloaded Rbase.
4479 // Loading Rbase would destroy compressed oop. Scaling in-place is ok.
4480 // Remedy: use Rbase_tmp.
4481 //
4482 Label done;
4483 Register Rdst_tmp = Rdst;
4484 Register Rbase_tmp = Rbase;
4485 bool used_R0 = false;
4486 bool used_R1 = false;
4487 bool base_preloaded = pow2_offset >= 0;
4488 guarantee(!(base_preloaded && (Rsrc == Rbase)), "Register clash, check caller");
4489 assert(oop_shift != 0, "room for optimization");
4490
4491 // Check if we need to use scratch registers.
4492 if (Rdst == Rbase) {
4493 assert(!(((Rdst == Z_R0) && (Rsrc == Z_R1)) || ((Rdst == Z_R1) && (Rsrc == Z_R0))), "need a scratch reg");
4494 if (Rdst != Rsrc) {
4495 if (base_preloaded) { Rdst_tmp = (Rdst == Z_R1) ? Z_R0 : Z_R1; }
4496 else { Rbase_tmp = (Rdst == Z_R1) ? Z_R0 : Z_R1; }
4497 } else {
4498 Rbase_tmp = (Rdst == Z_R1) ? Z_R0 : Z_R1;
4499 }
4500 }
4501 if (base_preloaded) lgr_if_needed(Rbase_tmp, Rbase);
4502
4503 // Scale oop and check for NULL.
4504 // Rsrc contains a narrow oop. Thus we are sure the leftmost <oop_shift> bits will never be set.
4505 if (maybeNULL) { // NULL ptr must be preserved!
4506 z_slag(Rdst_tmp, Rsrc, oop_shift); // Arithmetic shift sets the condition code.
4507 z_bre(done);
4508 } else {
4509 z_sllg(Rdst_tmp, Rsrc, oop_shift); // Logical shift leaves condition code alone.
4510 }
4511
4512 // Get oop_base components.
4513 if (!base_preloaded) {
4514 pow2_offset = get_oop_base(Rbase_tmp, (uint64_t)(intptr_t)oop_base);
4515 }
4516
4517 // Add up all components.
4518 if ((Rbase_tmp == Z_R0) || (Rdst_tmp == Z_R0)) {
4519 z_algr(Rdst_tmp, Rbase_tmp);
4520 if (pow2_offset != 0) { add2reg(Rdst_tmp, pow2_offset); }
4521 } else {
4522 add2reg_with_index(Rdst_tmp, pow2_offset, Rbase_tmp, Rdst_tmp);
4523 }
4524
4525 bind(done);
4526 lgr_if_needed(Rdst, Rdst_tmp);
4527 #ifdef ASSERT
4528 if (used_R0 && Rdst != Z_R0 && Rsrc != Z_R0) { preset_reg(Z_R0, 0xb03bUL, 2); }
4529 if (used_R1 && Rdst != Z_R1 && Rsrc != Z_R1) { preset_reg(Z_R1, 0xb04bUL, 2); }
4530 #endif
4531 BLOCK_COMMENT("} cOop decoder general");
4532 }
4533 } else {
4534 BLOCK_COMMENT("cOop decoder zeroBase {");
4535 if (oop_shift == 0) {
4536 lgr_if_needed(Rdst, Rsrc);
4537 } else {
4538 z_sllg(Rdst, Rsrc, oop_shift);
4539 }
4540 BLOCK_COMMENT("} cOop decoder zeroBase");
4541 }
4542 }
4543
4544 void MacroAssembler::load_mirror(Register mirror, Register method) {
4545 mem2reg_opt(mirror, Address(method, Method::const_offset()));
4546 mem2reg_opt(mirror, Address(mirror, ConstMethod::constants_offset()));
4547 mem2reg_opt(mirror, Address(mirror, ConstantPool::pool_holder_offset_in_bytes()));
4548 mem2reg_opt(mirror, Address(mirror, Klass::java_mirror_offset()));
4549 }
4550
4551 //---------------------------------------------------------------
4552 //--- Operations on arrays.
4553 //---------------------------------------------------------------
4554
4555 // Compiler ensures base is doubleword aligned and cnt is #doublewords.
4556 // Emitter does not KILL cnt and base arguments, since they need to be copied to
4557 // work registers anyway.
4558 // Actually, only r0, r1, and r5 are killed.
4559 unsigned int MacroAssembler::Clear_Array(Register cnt_arg, Register base_pointer_arg, Register src_addr, Register src_len) {
4560 // Src_addr is evenReg.
4561 // Src_len is odd_Reg.
4562
4563 int block_start = offset();
4564 Register tmp_reg = src_len; // Holds target instr addr for EX.
4565 Register dst_len = Z_R1; // Holds dst len for MVCLE.
4566 Register dst_addr = Z_R0; // Holds dst addr for MVCLE.
4567
4568 Label doXC, doMVCLE, done;
4569
4570 BLOCK_COMMENT("Clear_Array {");
4571
4572 // Check for zero len and convert to long.
4573 z_ltgfr(src_len, cnt_arg); // Remember casted value for doSTG case.
4574 z_bre(done); // Nothing to do if len == 0.
4575
4576 // Prefetch data to be cleared.
4577 if (VM_Version::has_Prefetch()) {
4578 z_pfd(0x02, 0, Z_R0, base_pointer_arg);
4579 z_pfd(0x02, 256, Z_R0, base_pointer_arg);
4580 }
4581
4582 z_sllg(dst_len, src_len, 3); // #bytes to clear.
4583 z_cghi(src_len, 32); // Check for len <= 256 bytes (<=32 DW).
4584 z_brnh(doXC); // If so, use executed XC to clear.
4585
4586 // MVCLE: initialize long arrays (general case).
4587 bind(doMVCLE);
4588 z_lgr(dst_addr, base_pointer_arg);
4589 clear_reg(src_len, true, false); // Src len of MVCLE is zero.
4590
4591 MacroAssembler::move_long_ext(dst_addr, src_addr, 0);
4592 z_bru(done);
4593
4594 // XC: initialize short arrays.
4595 Label XC_template; // Instr template, never exec directly!
4596 bind(XC_template);
4597 z_xc(0,0,base_pointer_arg,0,base_pointer_arg);
4598
4599 bind(doXC);
4600 add2reg(dst_len, -1); // Get #bytes-1 for EXECUTE.
4601 if (VM_Version::has_ExecuteExtensions()) {
4602 z_exrl(dst_len, XC_template); // Execute XC with var. len.
4603 } else {
4604 z_larl(tmp_reg, XC_template);
4605 z_ex(dst_len,0,Z_R0,tmp_reg); // Execute XC with var. len.
4606 }
4607 // z_bru(done); // fallthru
4608
4609 bind(done);
4610
4611 BLOCK_COMMENT("} Clear_Array");
4612
4613 int block_end = offset();
4614 return block_end - block_start;
4615 }
4616
4617 // Compiler ensures base is doubleword aligned and cnt is count of doublewords.
4618 // Emitter does not KILL any arguments nor work registers.
4619 // Emitter generates up to 16 XC instructions, depending on the array length.
4620 unsigned int MacroAssembler::Clear_Array_Const(long cnt, Register base) {
4621 int block_start = offset();
4622 int off;
4623 int lineSize_Bytes = AllocatePrefetchStepSize;
4624 int lineSize_DW = AllocatePrefetchStepSize>>LogBytesPerWord;
4625 bool doPrefetch = VM_Version::has_Prefetch();
4626 int XC_maxlen = 256;
4627 int numXCInstr = cnt > 0 ? (cnt*BytesPerWord-1)/XC_maxlen+1 : 0;
4628
4629 BLOCK_COMMENT("Clear_Array_Const {");
4630 assert(cnt*BytesPerWord <= 4096, "ClearArrayConst can handle 4k only");
4631
4632 // Do less prefetching for very short arrays.
4633 if (numXCInstr > 0) {
4634 // Prefetch only some cache lines, then begin clearing.
4635 if (doPrefetch) {
4636 if (cnt*BytesPerWord <= lineSize_Bytes/4) { // If less than 1/4 of a cache line to clear,
4637 z_pfd(0x02, 0, Z_R0, base); // prefetch just the first cache line.
4638 } else {
4639 assert(XC_maxlen == lineSize_Bytes, "ClearArrayConst needs 256B cache lines");
4640 for (off = 0; (off < AllocatePrefetchLines) && (off <= numXCInstr); off ++) {
4641 z_pfd(0x02, off*lineSize_Bytes, Z_R0, base);
4642 }
4643 }
4644 }
4645
4646 for (off=0; off<(numXCInstr-1); off++) {
4647 z_xc(off*XC_maxlen, XC_maxlen-1, base, off*XC_maxlen, base);
4648
4649 // Prefetch some cache lines in advance.
4650 if (doPrefetch && (off <= numXCInstr-AllocatePrefetchLines)) {
4651 z_pfd(0x02, (off+AllocatePrefetchLines)*lineSize_Bytes, Z_R0, base);
4652 }
4653 }
4654 if (off*XC_maxlen < cnt*BytesPerWord) {
4655 z_xc(off*XC_maxlen, (cnt*BytesPerWord-off*XC_maxlen)-1, base, off*XC_maxlen, base);
4656 }
4657 }
4658 BLOCK_COMMENT("} Clear_Array_Const");
4659
4660 int block_end = offset();
4661 return block_end - block_start;
4662 }
4663
4664 // Compiler ensures base is doubleword aligned and cnt is #doublewords.
4665 // Emitter does not KILL cnt and base arguments, since they need to be copied to
4666 // work registers anyway.
4667 // Actually, only r0, r1, r4, and r5 (which are work registers) are killed.
4668 //
4669 // For very large arrays, exploit MVCLE H/W support.
4670 // MVCLE instruction automatically exploits H/W-optimized page mover.
4671 // - Bytes up to next page boundary are cleared with a series of XC to self.
4672 // - All full pages are cleared with the page mover H/W assist.
4673 // - Remaining bytes are again cleared by a series of XC to self.
4674 //
4675 unsigned int MacroAssembler::Clear_Array_Const_Big(long cnt, Register base_pointer_arg, Register src_addr, Register src_len) {
4676 // Src_addr is evenReg.
4677 // Src_len is odd_Reg.
4678
4679 int block_start = offset();
4680 Register dst_len = Z_R1; // Holds dst len for MVCLE.
4681 Register dst_addr = Z_R0; // Holds dst addr for MVCLE.
4682
4683 BLOCK_COMMENT("Clear_Array_Const_Big {");
4684
4685 // Get len to clear.
4686 load_const_optimized(dst_len, (long)cnt*8L); // in Bytes = #DW*8
4687
4688 // Prepare other args to MVCLE.
4689 z_lgr(dst_addr, base_pointer_arg);
4690 // Indicate unused result.
4691 (void) clear_reg(src_len, true, false); // Src len of MVCLE is zero.
4692
4693 // Clear.
4694 MacroAssembler::move_long_ext(dst_addr, src_addr, 0);
4695 BLOCK_COMMENT("} Clear_Array_Const_Big");
4696
4697 int block_end = offset();
4698 return block_end - block_start;
4699 }
4700
4701 // Allocator.
4702 unsigned int MacroAssembler::CopyRawMemory_AlignedDisjoint(Register src_reg, Register dst_reg,
4703 Register cnt_reg,
4704 Register tmp1_reg, Register tmp2_reg) {
4705 // Tmp1 is oddReg.
4706 // Tmp2 is evenReg.
4707
4708 int block_start = offset();
4709 Label doMVC, doMVCLE, done, MVC_template;
4710
4711 BLOCK_COMMENT("CopyRawMemory_AlignedDisjoint {");
4712
4713 // Check for zero len and convert to long.
4714 z_ltgfr(cnt_reg, cnt_reg); // Remember casted value for doSTG case.
4715 z_bre(done); // Nothing to do if len == 0.
4716
4717 z_sllg(Z_R1, cnt_reg, 3); // Dst len in bytes. calc early to have the result ready.
4718
4719 z_cghi(cnt_reg, 32); // Check for len <= 256 bytes (<=32 DW).
4720 z_brnh(doMVC); // If so, use executed MVC to clear.
4721
4722 bind(doMVCLE); // A lot of data (more than 256 bytes).
4723 // Prep dest reg pair.
4724 z_lgr(Z_R0, dst_reg); // dst addr
4725 // Dst len already in Z_R1.
4726 // Prep src reg pair.
4727 z_lgr(tmp2_reg, src_reg); // src addr
4728 z_lgr(tmp1_reg, Z_R1); // Src len same as dst len.
4729
4730 // Do the copy.
4731 move_long_ext(Z_R0, tmp2_reg, 0xb0); // Bypass cache.
4732 z_bru(done); // All done.
4733
4734 bind(MVC_template); // Just some data (not more than 256 bytes).
4735 z_mvc(0, 0, dst_reg, 0, src_reg);
4736
4737 bind(doMVC);
4738
4739 if (VM_Version::has_ExecuteExtensions()) {
4740 add2reg(Z_R1, -1);
4741 } else {
4742 add2reg(tmp1_reg, -1, Z_R1);
4743 z_larl(Z_R1, MVC_template);
4744 }
4745
4746 if (VM_Version::has_Prefetch()) {
4747 z_pfd(1, 0,Z_R0,src_reg);
4748 z_pfd(2, 0,Z_R0,dst_reg);
4749 // z_pfd(1,256,Z_R0,src_reg); // Assume very short copy.
4750 // z_pfd(2,256,Z_R0,dst_reg);
4751 }
4752
4753 if (VM_Version::has_ExecuteExtensions()) {
4754 z_exrl(Z_R1, MVC_template);
4755 } else {
4756 z_ex(tmp1_reg, 0, Z_R0, Z_R1);
4757 }
4758
4759 bind(done);
4760
4761 BLOCK_COMMENT("} CopyRawMemory_AlignedDisjoint");
4762
4763 int block_end = offset();
4764 return block_end - block_start;
4765 }
4766
4767 //------------------------------------------------------
4768 // Special String Intrinsics. Implementation
4769 //------------------------------------------------------
4770
4771 // Intrinsics for CompactStrings
4772
4773 // Compress char[] to byte[]. odd_reg contains cnt. Kills dst. Early clobber: result
4774 // The result is the number of characters copied before the first incompatible character was found.
4775 // If tmp2 is provided and the compression fails, the compression stops exactly at this point and the result is precise.
4776 //
4777 // Note: Does not behave exactly like package private StringUTF16 compress java implementation in case of failure:
4778 // - Different number of characters may have been written to dead array (if tmp2 not provided).
4779 // - Returns a number <cnt instead of 0. (Result gets compared with cnt.)
4780 unsigned int MacroAssembler::string_compress(Register result, Register src, Register dst, Register odd_reg,
4781 Register even_reg, Register tmp, Register tmp2) {
4782 int block_start = offset();
4783 Label Lloop1, Lloop2, Lslow, Ldone;
4784 const Register addr2 = dst, ind1 = result, mask = tmp;
4785 const bool precise = (tmp2 != noreg);
4786
4787 BLOCK_COMMENT("string_compress {");
4788
4789 z_sll(odd_reg, 1); // Number of bytes to read. (Must be a positive simm32.)
4790 clear_reg(ind1); // Index to read.
4791 z_llilf(mask, 0xFF00FF00);
4792 z_ahi(odd_reg, -16); // Last possible index for fast loop.
4793 z_brl(Lslow);
4794
4795 // ind1: index, even_reg: index increment, odd_reg: index limit
4796 z_iihf(mask, 0xFF00FF00);
4797 z_lhi(even_reg, 16);
4798
4799 bind(Lloop1); // 8 Characters per iteration.
4800 z_lg(Z_R0, Address(src, ind1));
4801 z_lg(Z_R1, Address(src, ind1, 8));
4802 if (precise) {
4803 if (VM_Version::has_DistinctOpnds()) {
4804 z_ogrk(tmp2, Z_R0, Z_R1);
4805 } else {
4806 z_lgr(tmp2, Z_R0);
4807 z_ogr(tmp2, Z_R1);
4808 }
4809 z_ngr(tmp2, mask);
4810 z_brne(Lslow); // Failed fast case, retry slowly.
4811 }
4812 z_stcmh(Z_R0, 5, 0, addr2);
4813 z_stcm(Z_R0, 5, 2, addr2);
4814 if (!precise) { z_ogr(Z_R0, Z_R1); }
4815 z_stcmh(Z_R1, 5, 4, addr2);
4816 z_stcm(Z_R1, 5, 6, addr2);
4817 if (!precise) {
4818 z_ngr(Z_R0, mask);
4819 z_brne(Ldone); // Failed (more than needed was written).
4820 }
4821 z_aghi(addr2, 8);
4822 z_brxle(ind1, even_reg, Lloop1);
4823
4824 bind(Lslow);
4825 // Compute index limit and skip if negative.
4826 z_ahi(odd_reg, 16-2); // Last possible index for slow loop.
4827 z_lhi(even_reg, 2);
4828 z_cr(ind1, odd_reg);
4829 z_brh(Ldone);
4830
4831 bind(Lloop2); // 1 Character per iteration.
4832 z_llh(Z_R0, Address(src, ind1));
4833 z_tmll(Z_R0, 0xFF00);
4834 z_brnaz(Ldone); // Failed slow case: Return number of written characters.
4835 z_stc(Z_R0, Address(addr2));
4836 z_aghi(addr2, 1);
4837 z_brxle(ind1, even_reg, Lloop2);
4838
4839 bind(Ldone); // result = ind1 = 2*cnt
4840 z_srl(ind1, 1);
4841
4842 BLOCK_COMMENT("} string_compress");
4843
4844 return offset() - block_start;
4845 }
4846
4847 // Inflate byte[] to char[].
4848 unsigned int MacroAssembler::string_inflate_trot(Register src, Register dst, Register cnt, Register tmp) {
4849 int block_start = offset();
4850
4851 BLOCK_COMMENT("string_inflate {");
4852
4853 Register stop_char = Z_R0;
4854 Register table = Z_R1;
4855 Register src_addr = tmp;
4856
4857 assert_different_registers(Z_R0, Z_R1, tmp, src, dst, cnt);
4858 assert(dst->encoding()%2 == 0, "must be even reg");
4859 assert(cnt->encoding()%2 == 1, "must be odd reg");
4860 assert(cnt->encoding() - dst->encoding() == 1, "must be even/odd pair");
4861
4862 StubRoutines::zarch::generate_load_trot_table_addr(this, table); // kills Z_R0 (if ASSERT)
4863 clear_reg(stop_char); // Stop character. Not used here, but initialized to have a defined value.
4864 lgr_if_needed(src_addr, src);
4865 z_llgfr(cnt, cnt); // # src characters, must be a positive simm32.
4866
4867 translate_ot(dst, src_addr, /* mask = */ 0x0001);
4868
4869 BLOCK_COMMENT("} string_inflate");
4870
4871 return offset() - block_start;
4872 }
4873
4874 // Inflate byte[] to char[]. odd_reg contains cnt. Kills src.
4875 unsigned int MacroAssembler::string_inflate(Register src, Register dst, Register odd_reg,
4876 Register even_reg, Register tmp) {
4877 int block_start = offset();
4878
4879 BLOCK_COMMENT("string_inflate {");
4880
4881 Label Lloop1, Lloop2, Lslow, Ldone;
4882 const Register addr1 = src, ind2 = tmp;
4883
4884 z_sll(odd_reg, 1); // Number of bytes to write. (Must be a positive simm32.)
4885 clear_reg(ind2); // Index to write.
4886 z_ahi(odd_reg, -16); // Last possible index for fast loop.
4887 z_brl(Lslow);
4888
4889 // ind2: index, even_reg: index increment, odd_reg: index limit
4890 clear_reg(Z_R0);
4891 clear_reg(Z_R1);
4892 z_lhi(even_reg, 16);
4893
4894 bind(Lloop1); // 8 Characters per iteration.
4895 z_icmh(Z_R0, 5, 0, addr1);
4896 z_icmh(Z_R1, 5, 4, addr1);
4897 z_icm(Z_R0, 5, 2, addr1);
4898 z_icm(Z_R1, 5, 6, addr1);
4899 z_aghi(addr1, 8);
4900 z_stg(Z_R0, Address(dst, ind2));
4901 z_stg(Z_R1, Address(dst, ind2, 8));
4902 z_brxle(ind2, even_reg, Lloop1);
4903
4904 bind(Lslow);
4905 // Compute index limit and skip if negative.
4906 z_ahi(odd_reg, 16-2); // Last possible index for slow loop.
4907 z_lhi(even_reg, 2);
4908 z_cr(ind2, odd_reg);
4909 z_brh(Ldone);
4910
4911 bind(Lloop2); // 1 Character per iteration.
4912 z_llc(Z_R0, Address(addr1));
4913 z_sth(Z_R0, Address(dst, ind2));
4914 z_aghi(addr1, 1);
4915 z_brxle(ind2, even_reg, Lloop2);
4916
4917 bind(Ldone);
4918
4919 BLOCK_COMMENT("} string_inflate");
4920
4921 return offset() - block_start;
4922 }
4923
4924 // Kills src.
4925 unsigned int MacroAssembler::has_negatives(Register result, Register src, Register cnt,
4926 Register odd_reg, Register even_reg, Register tmp) {
4927 int block_start = offset();
4928 Label Lloop1, Lloop2, Lslow, Lnotfound, Ldone;
4929 const Register addr = src, mask = tmp;
4930
4931 BLOCK_COMMENT("has_negatives {");
4932
4933 z_llgfr(Z_R1, cnt); // Number of bytes to read. (Must be a positive simm32.)
4934 z_llilf(mask, 0x80808080);
4935 z_lhi(result, 1); // Assume true.
4936 // Last possible addr for fast loop.
4937 z_lay(odd_reg, -16, Z_R1, src);
4938 z_chi(cnt, 16);
4939 z_brl(Lslow);
4940
4941 // ind1: index, even_reg: index increment, odd_reg: index limit
4942 z_iihf(mask, 0x80808080);
4943 z_lghi(even_reg, 16);
4944
4945 bind(Lloop1); // 16 bytes per iteration.
4946 z_lg(Z_R0, Address(addr));
4947 z_lg(Z_R1, Address(addr, 8));
4948 z_ogr(Z_R0, Z_R1);
4949 z_ngr(Z_R0, mask);
4950 z_brne(Ldone); // If found return 1.
4951 z_brxlg(addr, even_reg, Lloop1);
4952
4953 bind(Lslow);
4954 z_aghi(odd_reg, 16-1); // Last possible addr for slow loop.
4955 z_lghi(even_reg, 1);
4956 z_cgr(addr, odd_reg);
4957 z_brh(Lnotfound);
4958
4959 bind(Lloop2); // 1 byte per iteration.
4960 z_cli(Address(addr), 0x80);
4961 z_brnl(Ldone); // If found return 1.
4962 z_brxlg(addr, even_reg, Lloop2);
4963
4964 bind(Lnotfound);
4965 z_lhi(result, 0);
4966
4967 bind(Ldone);
4968
4969 BLOCK_COMMENT("} has_negatives");
4970
4971 return offset() - block_start;
4972 }
4973
4974 // kill: cnt1, cnt2, odd_reg, even_reg; early clobber: result
4975 unsigned int MacroAssembler::string_compare(Register str1, Register str2,
4976 Register cnt1, Register cnt2,
4977 Register odd_reg, Register even_reg, Register result, int ae) {
4978 int block_start = offset();
4979
4980 assert_different_registers(str1, cnt1, cnt2, odd_reg, even_reg, result);
4981 assert_different_registers(str2, cnt1, cnt2, odd_reg, even_reg, result);
4982
4983 // If strings are equal up to min length, return the length difference.
4984 const Register diff = result, // Pre-set result with length difference.
4985 min = cnt1, // min number of bytes
4986 tmp = cnt2;
4987
4988 // Note: Making use of the fact that compareTo(a, b) == -compareTo(b, a)
4989 // we interchange str1 and str2 in the UL case and negate the result.
4990 // Like this, str1 is always latin1 encoded, except for the UU case.
4991 // In addition, we need 0 (or sign which is 0) extend when using 64 bit register.
4992 const bool used_as_LU = (ae == StrIntrinsicNode::LU || ae == StrIntrinsicNode::UL);
4993
4994 BLOCK_COMMENT("string_compare {");
4995
4996 if (used_as_LU) {
4997 z_srl(cnt2, 1);
4998 }
4999
5000 // See if the lengths are different, and calculate min in cnt1.
5001 // Save diff in case we need it for a tie-breaker.
5002
5003 // diff = cnt1 - cnt2
5004 if (VM_Version::has_DistinctOpnds()) {
5005 z_srk(diff, cnt1, cnt2);
5006 } else {
5007 z_lr(diff, cnt1);
5008 z_sr(diff, cnt2);
5009 }
5010 if (str1 != str2) {
5011 if (VM_Version::has_LoadStoreConditional()) {
5012 z_locr(min, cnt2, Assembler::bcondHigh);
5013 } else {
5014 Label Lskip;
5015 z_brl(Lskip); // min ok if cnt1 < cnt2
5016 z_lr(min, cnt2); // min = cnt2
5017 bind(Lskip);
5018 }
5019 }
5020
5021 if (ae == StrIntrinsicNode::UU) {
5022 z_sra(diff, 1);
5023 }
5024 if (str1 != str2) {
5025 Label Ldone;
5026 if (used_as_LU) {
5027 // Loop which searches the first difference character by character.
5028 Label Lloop;
5029 const Register ind1 = Z_R1,
5030 ind2 = min;
5031 int stride1 = 1, stride2 = 2; // See comment above.
5032
5033 // ind1: index, even_reg: index increment, odd_reg: index limit
5034 z_llilf(ind1, (unsigned int)(-stride1));
5035 z_lhi(even_reg, stride1);
5036 add2reg(odd_reg, -stride1, min);
5037 clear_reg(ind2); // kills min
5038
5039 bind(Lloop);
5040 z_brxh(ind1, even_reg, Ldone);
5041 z_llc(tmp, Address(str1, ind1));
5042 z_llh(Z_R0, Address(str2, ind2));
5043 z_ahi(ind2, stride2);
5044 z_sr(tmp, Z_R0);
5045 z_bre(Lloop);
5046
5047 z_lr(result, tmp);
5048
5049 } else {
5050 // Use clcle in fast loop (only for same encoding).
5051 z_lgr(Z_R0, str1);
5052 z_lgr(even_reg, str2);
5053 z_llgfr(Z_R1, min);
5054 z_llgfr(odd_reg, min);
5055
5056 if (ae == StrIntrinsicNode::LL) {
5057 compare_long_ext(Z_R0, even_reg, 0);
5058 } else {
5059 compare_long_uni(Z_R0, even_reg, 0);
5060 }
5061 z_bre(Ldone);
5062 z_lgr(Z_R1, Z_R0);
5063 if (ae == StrIntrinsicNode::LL) {
5064 z_llc(Z_R0, Address(even_reg));
5065 z_llc(result, Address(Z_R1));
5066 } else {
5067 z_llh(Z_R0, Address(even_reg));
5068 z_llh(result, Address(Z_R1));
5069 }
5070 z_sr(result, Z_R0);
5071 }
5072
5073 // Otherwise, return the difference between the first mismatched chars.
5074 bind(Ldone);
5075 }
5076
5077 if (ae == StrIntrinsicNode::UL) {
5078 z_lcr(result, result); // Negate result (see note above).
5079 }
5080
5081 BLOCK_COMMENT("} string_compare");
5082
5083 return offset() - block_start;
5084 }
5085
5086 unsigned int MacroAssembler::array_equals(bool is_array_equ, Register ary1, Register ary2, Register limit,
5087 Register odd_reg, Register even_reg, Register result, bool is_byte) {
5088 int block_start = offset();
5089
5090 BLOCK_COMMENT("array_equals {");
5091
5092 assert_different_registers(ary1, limit, odd_reg, even_reg);
5093 assert_different_registers(ary2, limit, odd_reg, even_reg);
5094
5095 Label Ldone, Ldone_true, Ldone_false, Lclcle, CLC_template;
5096 int base_offset = 0;
5097
5098 if (ary1 != ary2) {
5099 if (is_array_equ) {
5100 base_offset = arrayOopDesc::base_offset_in_bytes(is_byte ? T_BYTE : T_CHAR);
5101
5102 // Return true if the same array.
5103 compareU64_and_branch(ary1, ary2, Assembler::bcondEqual, Ldone_true);
5104
5105 // Return false if one of them is NULL.
5106 compareU64_and_branch(ary1, (intptr_t)0, Assembler::bcondEqual, Ldone_false);
5107 compareU64_and_branch(ary2, (intptr_t)0, Assembler::bcondEqual, Ldone_false);
5108
5109 // Load the lengths of arrays.
5110 z_llgf(odd_reg, Address(ary1, arrayOopDesc::length_offset_in_bytes()));
5111
5112 // Return false if the two arrays are not equal length.
5113 z_c(odd_reg, Address(ary2, arrayOopDesc::length_offset_in_bytes()));
5114 z_brne(Ldone_false);
5115
5116 // string len in bytes (right operand)
5117 if (!is_byte) {
5118 z_chi(odd_reg, 128);
5119 z_sll(odd_reg, 1); // preserves flags
5120 z_brh(Lclcle);
5121 } else {
5122 compareU32_and_branch(odd_reg, (intptr_t)256, Assembler::bcondHigh, Lclcle);
5123 }
5124 } else {
5125 z_llgfr(odd_reg, limit); // Need to zero-extend prior to using the value.
5126 compareU32_and_branch(limit, (intptr_t)256, Assembler::bcondHigh, Lclcle);
5127 }
5128
5129
5130 // Use clc instruction for up to 256 bytes.
5131 {
5132 Register str1_reg = ary1,
5133 str2_reg = ary2;
5134 if (is_array_equ) {
5135 str1_reg = Z_R1;
5136 str2_reg = even_reg;
5137 add2reg(str1_reg, base_offset, ary1); // string addr (left operand)
5138 add2reg(str2_reg, base_offset, ary2); // string addr (right operand)
5139 }
5140 z_ahi(odd_reg, -1); // Clc uses decremented limit. Also compare result to 0.
5141 z_brl(Ldone_true);
5142 // Note: We could jump to the template if equal.
5143
5144 assert(VM_Version::has_ExecuteExtensions(), "unsupported hardware");
5145 z_exrl(odd_reg, CLC_template);
5146 z_bre(Ldone_true);
5147 // fall through
5148
5149 bind(Ldone_false);
5150 clear_reg(result);
5151 z_bru(Ldone);
5152
5153 bind(CLC_template);
5154 z_clc(0, 0, str1_reg, 0, str2_reg);
5155 }
5156
5157 // Use clcle instruction.
5158 {
5159 bind(Lclcle);
5160 add2reg(even_reg, base_offset, ary2); // string addr (right operand)
5161 add2reg(Z_R0, base_offset, ary1); // string addr (left operand)
5162
5163 z_lgr(Z_R1, odd_reg); // string len in bytes (left operand)
5164 if (is_byte) {
5165 compare_long_ext(Z_R0, even_reg, 0);
5166 } else {
5167 compare_long_uni(Z_R0, even_reg, 0);
5168 }
5169 z_lghi(result, 0); // Preserve flags.
5170 z_brne(Ldone);
5171 }
5172 }
5173 // fall through
5174
5175 bind(Ldone_true);
5176 z_lghi(result, 1); // All characters are equal.
5177 bind(Ldone);
5178
5179 BLOCK_COMMENT("} array_equals");
5180
5181 return offset() - block_start;
5182 }
5183
5184 // kill: haycnt, needlecnt, odd_reg, even_reg; early clobber: result
5185 unsigned int MacroAssembler::string_indexof(Register result, Register haystack, Register haycnt,
5186 Register needle, Register needlecnt, int needlecntval,
5187 Register odd_reg, Register even_reg, int ae) {
5188 int block_start = offset();
5189
5190 // Ensure 0<needlecnt<=haycnt in ideal graph as prerequisite!
5191 assert(ae != StrIntrinsicNode::LU, "Invalid encoding");
5192 const int h_csize = (ae == StrIntrinsicNode::LL) ? 1 : 2;
5193 const int n_csize = (ae == StrIntrinsicNode::UU) ? 2 : 1;
5194 Label L_needle1, L_Found, L_NotFound;
5195
5196 BLOCK_COMMENT("string_indexof {");
5197
5198 if (needle == haystack) {
5199 z_lhi(result, 0);
5200 } else {
5201
5202 // Load first character of needle (R0 used by search_string instructions).
5203 if (n_csize == 2) { z_llgh(Z_R0, Address(needle)); } else { z_llgc(Z_R0, Address(needle)); }
5204
5205 // Compute last haystack addr to use if no match gets found.
5206 if (needlecnt != noreg) { // variable needlecnt
5207 z_ahi(needlecnt, -1); // Remaining characters after first one.
5208 z_sr(haycnt, needlecnt); // Compute index succeeding last element to compare.
5209 if (n_csize == 2) { z_sll(needlecnt, 1); } // In bytes.
5210 } else { // constant needlecnt
5211 assert((needlecntval & 0x7fff) == needlecntval, "must be positive simm16 immediate");
5212 // Compute index succeeding last element to compare.
5213 if (needlecntval != 1) { z_ahi(haycnt, 1 - needlecntval); }
5214 }
5215
5216 z_llgfr(haycnt, haycnt); // Clear high half.
5217 z_lgr(result, haystack); // Final result will be computed from needle start pointer.
5218 if (h_csize == 2) { z_sll(haycnt, 1); } // Scale to number of bytes.
5219 z_agr(haycnt, haystack); // Point to address succeeding last element (haystack+scale*(haycnt-needlecnt+1)).
5220
5221 if (h_csize != n_csize) {
5222 assert(ae == StrIntrinsicNode::UL, "Invalid encoding");
5223
5224 if (needlecnt != noreg || needlecntval != 1) {
5225 if (needlecnt != noreg) {
5226 compare32_and_branch(needlecnt, (intptr_t)0, Assembler::bcondEqual, L_needle1);
5227 }
5228
5229 // Main Loop: UL version (now we have at least 2 characters).
5230 Label L_OuterLoop, L_InnerLoop, L_Skip;
5231 bind(L_OuterLoop); // Search for 1st 2 characters.
5232 z_lgr(Z_R1, haycnt);
5233 MacroAssembler::search_string_uni(Z_R1, result);
5234 z_brc(Assembler::bcondNotFound, L_NotFound);
5235 z_lgr(result, Z_R1);
5236
5237 z_lghi(Z_R1, n_csize);
5238 z_lghi(even_reg, h_csize);
5239 bind(L_InnerLoop);
5240 z_llgc(odd_reg, Address(needle, Z_R1));
5241 z_ch(odd_reg, Address(result, even_reg));
5242 z_brne(L_Skip);
5243 if (needlecnt != noreg) { z_cr(Z_R1, needlecnt); } else { z_chi(Z_R1, needlecntval - 1); }
5244 z_brnl(L_Found);
5245 z_aghi(Z_R1, n_csize);
5246 z_aghi(even_reg, h_csize);
5247 z_bru(L_InnerLoop);
5248
5249 bind(L_Skip);
5250 z_aghi(result, h_csize); // This is the new address we want to use for comparing.
5251 z_bru(L_OuterLoop);
5252 }
5253
5254 } else {
5255 const intptr_t needle_bytes = (n_csize == 2) ? ((needlecntval - 1) << 1) : (needlecntval - 1);
5256 Label L_clcle;
5257
5258 if (needlecnt != noreg || (needlecntval != 1 && needle_bytes <= 256)) {
5259 if (needlecnt != noreg) {
5260 compare32_and_branch(needlecnt, 256, Assembler::bcondHigh, L_clcle);
5261 z_ahi(needlecnt, -1); // remaining bytes -1 (for CLC)
5262 z_brl(L_needle1);
5263 }
5264
5265 // Main Loop: clc version (now we have at least 2 characters).
5266 Label L_OuterLoop, CLC_template;
5267 bind(L_OuterLoop); // Search for 1st 2 characters.
5268 z_lgr(Z_R1, haycnt);
5269 if (h_csize == 1) {
5270 MacroAssembler::search_string(Z_R1, result);
5271 } else {
5272 MacroAssembler::search_string_uni(Z_R1, result);
5273 }
5274 z_brc(Assembler::bcondNotFound, L_NotFound);
5275 z_lgr(result, Z_R1);
5276
5277 if (needlecnt != noreg) {
5278 assert(VM_Version::has_ExecuteExtensions(), "unsupported hardware");
5279 z_exrl(needlecnt, CLC_template);
5280 } else {
5281 z_clc(h_csize, needle_bytes -1, Z_R1, n_csize, needle);
5282 }
5283 z_bre(L_Found);
5284 z_aghi(result, h_csize); // This is the new address we want to use for comparing.
5285 z_bru(L_OuterLoop);
5286
5287 if (needlecnt != noreg) {
5288 bind(CLC_template);
5289 z_clc(h_csize, 0, Z_R1, n_csize, needle);
5290 }
5291 }
5292
5293 if (needlecnt != noreg || needle_bytes > 256) {
5294 bind(L_clcle);
5295
5296 // Main Loop: clcle version (now we have at least 256 bytes).
5297 Label L_OuterLoop, CLC_template;
5298 bind(L_OuterLoop); // Search for 1st 2 characters.
5299 z_lgr(Z_R1, haycnt);
5300 if (h_csize == 1) {
5301 MacroAssembler::search_string(Z_R1, result);
5302 } else {
5303 MacroAssembler::search_string_uni(Z_R1, result);
5304 }
5305 z_brc(Assembler::bcondNotFound, L_NotFound);
5306
5307 add2reg(Z_R0, n_csize, needle);
5308 add2reg(even_reg, h_csize, Z_R1);
5309 z_lgr(result, Z_R1);
5310 if (needlecnt != noreg) {
5311 z_llgfr(Z_R1, needlecnt); // needle len in bytes (left operand)
5312 z_llgfr(odd_reg, needlecnt);
5313 } else {
5314 load_const_optimized(Z_R1, needle_bytes);
5315 if (Immediate::is_simm16(needle_bytes)) { z_lghi(odd_reg, needle_bytes); } else { z_lgr(odd_reg, Z_R1); }
5316 }
5317 if (h_csize == 1) {
5318 compare_long_ext(Z_R0, even_reg, 0);
5319 } else {
5320 compare_long_uni(Z_R0, even_reg, 0);
5321 }
5322 z_bre(L_Found);
5323
5324 if (n_csize == 2) { z_llgh(Z_R0, Address(needle)); } else { z_llgc(Z_R0, Address(needle)); } // Reload.
5325 z_aghi(result, h_csize); // This is the new address we want to use for comparing.
5326 z_bru(L_OuterLoop);
5327 }
5328 }
5329
5330 if (needlecnt != noreg || needlecntval == 1) {
5331 bind(L_needle1);
5332
5333 // Single needle character version.
5334 if (h_csize == 1) {
5335 MacroAssembler::search_string(haycnt, result);
5336 } else {
5337 MacroAssembler::search_string_uni(haycnt, result);
5338 }
5339 z_lgr(result, haycnt);
5340 z_brc(Assembler::bcondFound, L_Found);
5341 }
5342
5343 bind(L_NotFound);
5344 add2reg(result, -1, haystack); // Return -1.
5345
5346 bind(L_Found); // Return index (or -1 in fallthrough case).
5347 z_sgr(result, haystack);
5348 if (h_csize == 2) { z_srag(result, result, exact_log2(sizeof(jchar))); }
5349 }
5350 BLOCK_COMMENT("} string_indexof");
5351
5352 return offset() - block_start;
5353 }
5354
5355 // early clobber: result
5356 unsigned int MacroAssembler::string_indexof_char(Register result, Register haystack, Register haycnt,
5357 Register needle, jchar needleChar, Register odd_reg, Register even_reg, bool is_byte) {
5358 int block_start = offset();
5359
5360 BLOCK_COMMENT("string_indexof_char {");
5361
5362 if (needle == haystack) {
5363 z_lhi(result, 0);
5364 } else {
5365
5366 Label Ldone;
5367
5368 z_llgfr(odd_reg, haycnt); // Preset loop ctr/searchrange end.
5369 if (needle == noreg) {
5370 load_const_optimized(Z_R0, (unsigned long)needleChar);
5371 } else {
5372 if (is_byte) {
5373 z_llgcr(Z_R0, needle); // First (and only) needle char.
5374 } else {
5375 z_llghr(Z_R0, needle); // First (and only) needle char.
5376 }
5377 }
5378
5379 if (!is_byte) {
5380 z_agr(odd_reg, odd_reg); // Calc #bytes to be processed with SRSTU.
5381 }
5382
5383 z_lgr(even_reg, haystack); // haystack addr
5384 z_agr(odd_reg, haystack); // First char after range end.
5385 z_lghi(result, -1);
5386
5387 if (is_byte) {
5388 MacroAssembler::search_string(odd_reg, even_reg);
5389 } else {
5390 MacroAssembler::search_string_uni(odd_reg, even_reg);
5391 }
5392 z_brc(Assembler::bcondNotFound, Ldone);
5393 if (is_byte) {
5394 if (VM_Version::has_DistinctOpnds()) {
5395 z_sgrk(result, odd_reg, haystack);
5396 } else {
5397 z_sgr(odd_reg, haystack);
5398 z_lgr(result, odd_reg);
5399 }
5400 } else {
5401 z_slgr(odd_reg, haystack);
5402 z_srlg(result, odd_reg, exact_log2(sizeof(jchar)));
5403 }
5404
5405 bind(Ldone);
5406 }
5407 BLOCK_COMMENT("} string_indexof_char");
5408
5409 return offset() - block_start;
5410 }
5411
5412
5413 //-------------------------------------------------
5414 // Constants (scalar and oop) in constant pool
5415 //-------------------------------------------------
5416
5417 // Add a non-relocated constant to the CP.
5418 int MacroAssembler::store_const_in_toc(AddressLiteral& val) {
5419 long value = val.value();
5420 address tocPos = long_constant(value);
5421
5422 if (tocPos != NULL) {
5423 int tocOffset = (int)(tocPos - code()->consts()->start());
5424 return tocOffset;
5425 }
5426 // Address_constant returned NULL, so no constant entry has been created.
5427 // In that case, we return a "fatal" offset, just in case that subsequently
5428 // generated access code is executed.
5429 return -1;
5430 }
5431
5432 // Returns the TOC offset where the address is stored.
5433 // Add a relocated constant to the CP.
5434 int MacroAssembler::store_oop_in_toc(AddressLiteral& oop) {
5435 // Use RelocationHolder::none for the constant pool entry.
5436 // Otherwise we will end up with a failing NativeCall::verify(x),
5437 // where x is the address of the constant pool entry.
5438 address tocPos = address_constant((address)oop.value(), RelocationHolder::none);
5439
5440 if (tocPos != NULL) {
5441 int tocOffset = (int)(tocPos - code()->consts()->start());
5442 RelocationHolder rsp = oop.rspec();
5443 Relocation *rel = rsp.reloc();
5444
5445 // Store toc_offset in relocation, used by call_far_patchable.
5446 if ((relocInfo::relocType)rel->type() == relocInfo::runtime_call_w_cp_type) {
5447 ((runtime_call_w_cp_Relocation *)(rel))->set_constant_pool_offset(tocOffset);
5448 }
5449 // Relocate at the load's pc.
5450 relocate(rsp);
5451
5452 return tocOffset;
5453 }
5454 // Address_constant returned NULL, so no constant entry has been created
5455 // in that case, we return a "fatal" offset, just in case that subsequently
5456 // generated access code is executed.
5457 return -1;
5458 }
5459
5460 bool MacroAssembler::load_const_from_toc(Register dst, AddressLiteral& a, Register Rtoc) {
5461 int tocOffset = store_const_in_toc(a);
5462 if (tocOffset == -1) return false;
5463 address tocPos = tocOffset + code()->consts()->start();
5464 assert((address)code()->consts()->start() != NULL, "Please add CP address");
5465
5466 load_long_pcrelative(dst, tocPos);
5467 return true;
5468 }
5469
5470 bool MacroAssembler::load_oop_from_toc(Register dst, AddressLiteral& a, Register Rtoc) {
5471 int tocOffset = store_oop_in_toc(a);
5472 if (tocOffset == -1) return false;
5473 address tocPos = tocOffset + code()->consts()->start();
5474 assert((address)code()->consts()->start() != NULL, "Please add CP address");
5475
5476 load_addr_pcrelative(dst, tocPos);
5477 return true;
5478 }
5479
5480 // If the instruction sequence at the given pc is a load_const_from_toc
5481 // sequence, return the value currently stored at the referenced position
5482 // in the TOC.
5483 intptr_t MacroAssembler::get_const_from_toc(address pc) {
5484
5485 assert(is_load_const_from_toc(pc), "must be load_const_from_pool");
5486
5487 long offset = get_load_const_from_toc_offset(pc);
5488 address dataLoc = NULL;
5489 if (is_load_const_from_toc_pcrelative(pc)) {
5490 dataLoc = pc + offset;
5491 } else {
5492 CodeBlob* cb = CodeCache::find_blob_unsafe(pc); // Else we get assertion if nmethod is zombie.
5493 assert(cb && cb->is_nmethod(), "sanity");
5494 nmethod* nm = (nmethod*)cb;
5495 dataLoc = nm->ctable_begin() + offset;
5496 }
5497 return *(intptr_t *)dataLoc;
5498 }
5499
5500 // If the instruction sequence at the given pc is a load_const_from_toc
5501 // sequence, copy the passed-in new_data value into the referenced
5502 // position in the TOC.
5503 void MacroAssembler::set_const_in_toc(address pc, unsigned long new_data, CodeBlob *cb) {
5504 assert(is_load_const_from_toc(pc), "must be load_const_from_pool");
5505
5506 long offset = MacroAssembler::get_load_const_from_toc_offset(pc);
5507 address dataLoc = NULL;
5508 if (is_load_const_from_toc_pcrelative(pc)) {
5509 dataLoc = pc+offset;
5510 } else {
5511 nmethod* nm = CodeCache::find_nmethod(pc);
5512 assert((cb == NULL) || (nm == (nmethod*)cb), "instruction address should be in CodeBlob");
5513 dataLoc = nm->ctable_begin() + offset;
5514 }
5515 if (*(unsigned long *)dataLoc != new_data) { // Prevent cache invalidation: update only if necessary.
5516 *(unsigned long *)dataLoc = new_data;
5517 }
5518 }
5519
5520 // Dynamic TOC. Getter must only be called if "a" is a load_const_from_toc
5521 // site. Verify by calling is_load_const_from_toc() before!!
5522 // Offset is +/- 2**32 -> use long.
5523 long MacroAssembler::get_load_const_from_toc_offset(address a) {
5524 assert(is_load_const_from_toc_pcrelative(a), "expected pc relative load");
5525 // expected code sequence:
5526 // z_lgrl(t, simm32); len = 6
5527 unsigned long inst;
5528 unsigned int len = get_instruction(a, &inst);
5529 return get_pcrel_offset(inst);
5530 }
5531
5532 //**********************************************************************************
5533 // inspection of generated instruction sequences for a particular pattern
5534 //**********************************************************************************
5535
5536 bool MacroAssembler::is_load_const_from_toc_pcrelative(address a) {
5537 #ifdef ASSERT
5538 unsigned long inst;
5539 unsigned int len = get_instruction(a+2, &inst);
5540 if ((len == 6) && is_load_pcrelative_long(a) && is_call_pcrelative_long(inst)) {
5541 const int range = 128;
5542 Assembler::dump_code_range(tty, a, range, "instr(a) == z_lgrl && instr(a+2) == z_brasl");
5543 VM_Version::z_SIGSEGV();
5544 }
5545 #endif
5546 // expected code sequence:
5547 // z_lgrl(t, relAddr32); len = 6
5548 //TODO: verify accessed data is in CP, if possible.
5549 return is_load_pcrelative_long(a); // TODO: might be too general. Currently, only lgrl is used.
5550 }
5551
5552 bool MacroAssembler::is_load_const_from_toc_call(address a) {
5553 return is_load_const_from_toc(a) && is_call_byregister(a + load_const_from_toc_size());
5554 }
5555
5556 bool MacroAssembler::is_load_const_call(address a) {
5557 return is_load_const(a) && is_call_byregister(a + load_const_size());
5558 }
5559
5560 //-------------------------------------------------
5561 // Emitters for some really CICS instructions
5562 //-------------------------------------------------
5563
5564 void MacroAssembler::move_long_ext(Register dst, Register src, unsigned int pad) {
5565 assert(dst->encoding()%2==0, "must be an even/odd register pair");
5566 assert(src->encoding()%2==0, "must be an even/odd register pair");
5567 assert(pad<256, "must be a padding BYTE");
5568
5569 Label retry;
5570 bind(retry);
5571 Assembler::z_mvcle(dst, src, pad);
5572 Assembler::z_brc(Assembler::bcondOverflow /* CC==3 (iterate) */, retry);
5573 }
5574
5575 void MacroAssembler::compare_long_ext(Register left, Register right, unsigned int pad) {
5576 assert(left->encoding() % 2 == 0, "must be an even/odd register pair");
5577 assert(right->encoding() % 2 == 0, "must be an even/odd register pair");
5578 assert(pad<256, "must be a padding BYTE");
5579
5580 Label retry;
5581 bind(retry);
5582 Assembler::z_clcle(left, right, pad, Z_R0);
5583 Assembler::z_brc(Assembler::bcondOverflow /* CC==3 (iterate) */, retry);
5584 }
5585
5586 void MacroAssembler::compare_long_uni(Register left, Register right, unsigned int pad) {
5587 assert(left->encoding() % 2 == 0, "must be an even/odd register pair");
5588 assert(right->encoding() % 2 == 0, "must be an even/odd register pair");
5589 assert(pad<=0xfff, "must be a padding HALFWORD");
5590 assert(VM_Version::has_ETF2(), "instruction must be available");
5591
5592 Label retry;
5593 bind(retry);
5594 Assembler::z_clclu(left, right, pad, Z_R0);
5595 Assembler::z_brc(Assembler::bcondOverflow /* CC==3 (iterate) */, retry);
5596 }
5597
5598 void MacroAssembler::search_string(Register end, Register start) {
5599 assert(end->encoding() != 0, "end address must not be in R0");
5600 assert(start->encoding() != 0, "start address must not be in R0");
5601
5602 Label retry;
5603 bind(retry);
5604 Assembler::z_srst(end, start);
5605 Assembler::z_brc(Assembler::bcondOverflow /* CC==3 (iterate) */, retry);
5606 }
5607
5608 void MacroAssembler::search_string_uni(Register end, Register start) {
5609 assert(end->encoding() != 0, "end address must not be in R0");
5610 assert(start->encoding() != 0, "start address must not be in R0");
5611 assert(VM_Version::has_ETF3(), "instruction must be available");
5612
5613 Label retry;
5614 bind(retry);
5615 Assembler::z_srstu(end, start);
5616 Assembler::z_brc(Assembler::bcondOverflow /* CC==3 (iterate) */, retry);
5617 }
5618
5619 void MacroAssembler::kmac(Register srcBuff) {
5620 assert(srcBuff->encoding() != 0, "src buffer address can't be in Z_R0");
5621 assert(srcBuff->encoding() % 2 == 0, "src buffer/len must be an even/odd register pair");
5622
5623 Label retry;
5624 bind(retry);
5625 Assembler::z_kmac(Z_R0, srcBuff);
5626 Assembler::z_brc(Assembler::bcondOverflow /* CC==3 (iterate) */, retry);
5627 }
5628
5629 void MacroAssembler::kimd(Register srcBuff) {
5630 assert(srcBuff->encoding() != 0, "src buffer address can't be in Z_R0");
5631 assert(srcBuff->encoding() % 2 == 0, "src buffer/len must be an even/odd register pair");
5632
5633 Label retry;
5634 bind(retry);
5635 Assembler::z_kimd(Z_R0, srcBuff);
5636 Assembler::z_brc(Assembler::bcondOverflow /* CC==3 (iterate) */, retry);
5637 }
5638
5639 void MacroAssembler::klmd(Register srcBuff) {
5640 assert(srcBuff->encoding() != 0, "src buffer address can't be in Z_R0");
5641 assert(srcBuff->encoding() % 2 == 0, "src buffer/len must be an even/odd register pair");
5642
5643 Label retry;
5644 bind(retry);
5645 Assembler::z_klmd(Z_R0, srcBuff);
5646 Assembler::z_brc(Assembler::bcondOverflow /* CC==3 (iterate) */, retry);
5647 }
5648
5649 void MacroAssembler::km(Register dstBuff, Register srcBuff) {
5650 // DstBuff and srcBuff are allowed to be the same register (encryption in-place).
5651 // DstBuff and srcBuff storage must not overlap destructively, and neither must overlap the parameter block.
5652 assert(srcBuff->encoding() != 0, "src buffer address can't be in Z_R0");
5653 assert(dstBuff->encoding() % 2 == 0, "dst buffer addr must be an even register");
5654 assert(srcBuff->encoding() % 2 == 0, "src buffer addr/len must be an even/odd register pair");
5655
5656 Label retry;
5657 bind(retry);
5658 Assembler::z_km(dstBuff, srcBuff);
5659 Assembler::z_brc(Assembler::bcondOverflow /* CC==3 (iterate) */, retry);
5660 }
5661
5662 void MacroAssembler::kmc(Register dstBuff, Register srcBuff) {
5663 // DstBuff and srcBuff are allowed to be the same register (encryption in-place).
5664 // DstBuff and srcBuff storage must not overlap destructively, and neither must overlap the parameter block.
5665 assert(srcBuff->encoding() != 0, "src buffer address can't be in Z_R0");
5666 assert(dstBuff->encoding() % 2 == 0, "dst buffer addr must be an even register");
5667 assert(srcBuff->encoding() % 2 == 0, "src buffer addr/len must be an even/odd register pair");
5668
5669 Label retry;
5670 bind(retry);
5671 Assembler::z_kmc(dstBuff, srcBuff);
5672 Assembler::z_brc(Assembler::bcondOverflow /* CC==3 (iterate) */, retry);
5673 }
5674
5675 void MacroAssembler::cksm(Register crcBuff, Register srcBuff) {
5676 assert(srcBuff->encoding() % 2 == 0, "src buffer addr/len must be an even/odd register pair");
5677
5678 Label retry;
5679 bind(retry);
5680 Assembler::z_cksm(crcBuff, srcBuff);
5681 Assembler::z_brc(Assembler::bcondOverflow /* CC==3 (iterate) */, retry);
5682 }
5683
5684 void MacroAssembler::translate_oo(Register r1, Register r2, uint m3) {
5685 assert(r1->encoding() % 2 == 0, "dst addr/src len must be an even/odd register pair");
5686 assert((m3 & 0b1110) == 0, "Unused mask bits must be zero");
5687
5688 Label retry;
5689 bind(retry);
5690 Assembler::z_troo(r1, r2, m3);
5691 Assembler::z_brc(Assembler::bcondOverflow /* CC==3 (iterate) */, retry);
5692 }
5693
5694 void MacroAssembler::translate_ot(Register r1, Register r2, uint m3) {
5695 assert(r1->encoding() % 2 == 0, "dst addr/src len must be an even/odd register pair");
5696 assert((m3 & 0b1110) == 0, "Unused mask bits must be zero");
5697
5698 Label retry;
5699 bind(retry);
5700 Assembler::z_trot(r1, r2, m3);
5701 Assembler::z_brc(Assembler::bcondOverflow /* CC==3 (iterate) */, retry);
5702 }
5703
5704 void MacroAssembler::translate_to(Register r1, Register r2, uint m3) {
5705 assert(r1->encoding() % 2 == 0, "dst addr/src len must be an even/odd register pair");
5706 assert((m3 & 0b1110) == 0, "Unused mask bits must be zero");
5707
5708 Label retry;
5709 bind(retry);
5710 Assembler::z_trto(r1, r2, m3);
5711 Assembler::z_brc(Assembler::bcondOverflow /* CC==3 (iterate) */, retry);
5712 }
5713
5714 void MacroAssembler::translate_tt(Register r1, Register r2, uint m3) {
5715 assert(r1->encoding() % 2 == 0, "dst addr/src len must be an even/odd register pair");
5716 assert((m3 & 0b1110) == 0, "Unused mask bits must be zero");
5717
5718 Label retry;
5719 bind(retry);
5720 Assembler::z_trtt(r1, r2, m3);
5721 Assembler::z_brc(Assembler::bcondOverflow /* CC==3 (iterate) */, retry);
5722 }
5723
5724 void MacroAssembler::generate_safepoint_check(Label& slow_path, Register scratch, bool may_relocate) {
5725 if (scratch == noreg) scratch = Z_R1;
5726 address Astate = SafepointSynchronize::address_of_state();
5727 BLOCK_COMMENT("safepoint check:");
5728
5729 if (may_relocate) {
5730 ptrdiff_t total_distance = Astate - this->pc();
5731 if (RelAddr::is_in_range_of_RelAddr32(total_distance)) {
5732 RelocationHolder rspec = external_word_Relocation::spec(Astate);
5733 (this)->relocate(rspec, relocInfo::pcrel_addr_format);
5734 load_absolute_address(scratch, Astate);
5735 } else {
5736 load_const_optimized(scratch, Astate);
5737 }
5738 } else {
5739 load_absolute_address(scratch, Astate);
5740 }
5741 z_cli(/*SafepointSynchronize::sz_state()*/4-1, scratch, SafepointSynchronize::_not_synchronized);
5742 z_brne(slow_path);
5743 }
5744
5745
5746 void MacroAssembler::generate_type_profiling(const Register Rdata,
5747 const Register Rreceiver_klass,
5748 const Register Rwanted_receiver_klass,
5749 const Register Rmatching_row,
5750 bool is_virtual_call) {
5751 const int row_size = in_bytes(ReceiverTypeData::receiver_offset(1)) -
5752 in_bytes(ReceiverTypeData::receiver_offset(0));
5753 const int num_rows = ReceiverTypeData::row_limit();
5754 NearLabel found_free_row;
5755 NearLabel do_increment;
5756 NearLabel found_no_slot;
5757
5758 BLOCK_COMMENT("type profiling {");
5759
5760 // search for:
5761 // a) The type given in Rwanted_receiver_klass.
5762 // b) The *first* empty row.
5763
5764 // First search for a) only, just running over b) with no regard.
5765 // This is possible because
5766 // wanted_receiver_class == receiver_class && wanted_receiver_class == 0
5767 // is never true (receiver_class can't be zero).
5768 for (int row_num = 0; row_num < num_rows; row_num++) {
5769 // Row_offset should be a well-behaved positive number. The generated code relies
5770 // on that wrt constant code size. Add2reg can handle all row_offset values, but
5771 // will have to vary generated code size.
5772 int row_offset = in_bytes(ReceiverTypeData::receiver_offset(row_num));
5773 assert(Displacement::is_shortDisp(row_offset), "Limitation of generated code");
5774
5775 // Is Rwanted_receiver_klass in this row?
5776 if (VM_Version::has_CompareBranch()) {
5777 z_lg(Rwanted_receiver_klass, row_offset, Z_R0, Rdata);
5778 // Rmatching_row = Rdata + row_offset;
5779 add2reg(Rmatching_row, row_offset, Rdata);
5780 // if (*row_recv == (intptr_t) receiver_klass) goto fill_existing_slot;
5781 compare64_and_branch(Rwanted_receiver_klass, Rreceiver_klass, Assembler::bcondEqual, do_increment);
5782 } else {
5783 add2reg(Rmatching_row, row_offset, Rdata);
5784 z_cg(Rreceiver_klass, row_offset, Z_R0, Rdata);
5785 z_bre(do_increment);
5786 }
5787 }
5788
5789 // Now that we did not find a match, let's search for b).
5790
5791 // We could save the first calculation of Rmatching_row if we woud search for a) in reverse order.
5792 // We would then end up here with Rmatching_row containing the value for row_num == 0.
5793 // We would not see much benefit, if any at all, because the CPU can schedule
5794 // two instructions together with a branch anyway.
5795 for (int row_num = 0; row_num < num_rows; row_num++) {
5796 int row_offset = in_bytes(ReceiverTypeData::receiver_offset(row_num));
5797
5798 // Has this row a zero receiver_klass, i.e. is it empty?
5799 if (VM_Version::has_CompareBranch()) {
5800 z_lg(Rwanted_receiver_klass, row_offset, Z_R0, Rdata);
5801 // Rmatching_row = Rdata + row_offset
5802 add2reg(Rmatching_row, row_offset, Rdata);
5803 // if (*row_recv == (intptr_t) 0) goto found_free_row
5804 compare64_and_branch(Rwanted_receiver_klass, (intptr_t)0, Assembler::bcondEqual, found_free_row);
5805 } else {
5806 add2reg(Rmatching_row, row_offset, Rdata);
5807 load_and_test_long(Rwanted_receiver_klass, Address(Rdata, row_offset));
5808 z_bre(found_free_row); // zero -> Found a free row.
5809 }
5810 }
5811
5812 // No match, no empty row found.
5813 // Increment total counter to indicate polymorphic case.
5814 if (is_virtual_call) {
5815 add2mem_64(Address(Rdata, CounterData::count_offset()), 1, Rmatching_row);
5816 }
5817 z_bru(found_no_slot);
5818
5819 // Here we found an empty row, but we have not found Rwanted_receiver_klass.
5820 // Rmatching_row holds the address to the first empty row.
5821 bind(found_free_row);
5822 // Store receiver_klass into empty slot.
5823 z_stg(Rreceiver_klass, 0, Z_R0, Rmatching_row);
5824
5825 // Increment the counter of Rmatching_row.
5826 bind(do_increment);
5827 ByteSize counter_offset = ReceiverTypeData::receiver_count_offset(0) - ReceiverTypeData::receiver_offset(0);
5828 add2mem_64(Address(Rmatching_row, counter_offset), 1, Rdata);
5829
5830 bind(found_no_slot);
5831
5832 BLOCK_COMMENT("} type profiling");
5833 }
5834
5835 //---------------------------------------
5836 // Helpers for Intrinsic Emitters
5837 //---------------------------------------
5838
5839 /**
5840 * uint32_t crc;
5841 * timesXtoThe32[crc & 0xFF] ^ (crc >> 8);
5842 */
5843 void MacroAssembler::fold_byte_crc32(Register crc, Register val, Register table, Register tmp) {
5844 assert_different_registers(crc, table, tmp);
5845 assert_different_registers(val, table);
5846 if (crc == val) { // Must rotate first to use the unmodified value.
5847 rotate_then_insert(tmp, val, 56-2, 63-2, 2, true); // Insert byte 7 of val, shifted left by 2, into byte 6..7 of tmp, clear the rest.
5848 z_srl(crc, 8); // Unsigned shift, clear leftmost 8 bits.
5849 } else {
5850 z_srl(crc, 8); // Unsigned shift, clear leftmost 8 bits.
5851 rotate_then_insert(tmp, val, 56-2, 63-2, 2, true); // Insert byte 7 of val, shifted left by 2, into byte 6..7 of tmp, clear the rest.
5852 }
5853 z_x(crc, Address(table, tmp, 0));
5854 }
5855
5856 /**
5857 * uint32_t crc;
5858 * timesXtoThe32[crc & 0xFF] ^ (crc >> 8);
5859 */
5860 void MacroAssembler::fold_8bit_crc32(Register crc, Register table, Register tmp) {
5861 fold_byte_crc32(crc, crc, table, tmp);
5862 }
5863
5864 /**
5865 * Emits code to update CRC-32 with a byte value according to constants in table.
5866 *
5867 * @param [in,out]crc Register containing the crc.
5868 * @param [in]val Register containing the byte to fold into the CRC.
5869 * @param [in]table Register containing the table of crc constants.
5870 *
5871 * uint32_t crc;
5872 * val = crc_table[(val ^ crc) & 0xFF];
5873 * crc = val ^ (crc >> 8);
5874 */
5875 void MacroAssembler::update_byte_crc32(Register crc, Register val, Register table) {
5876 z_xr(val, crc);
5877 fold_byte_crc32(crc, val, table, val);
5878 }
5879
5880
5881 /**
5882 * @param crc register containing existing CRC (32-bit)
5883 * @param buf register pointing to input byte buffer (byte*)
5884 * @param len register containing number of bytes
5885 * @param table register pointing to CRC table
5886 */
5887 void MacroAssembler::update_byteLoop_crc32(Register crc, Register buf, Register len, Register table,
5888 Register data, bool invertCRC) {
5889 assert_different_registers(crc, buf, len, table, data);
5890
5891 Label L_mainLoop, L_done;
5892 const int mainLoop_stepping = 1;
5893
5894 // Process all bytes in a single-byte loop.
5895 z_ltr(len, len);
5896 z_brnh(L_done);
5897
5898 if (invertCRC) {
5899 not_(crc, noreg, false); // ~c
5900 }
5901
5902 bind(L_mainLoop);
5903 z_llgc(data, Address(buf, (intptr_t)0));// Current byte of input buffer (zero extended). Avoids garbage in upper half of register.
5904 add2reg(buf, mainLoop_stepping); // Advance buffer position.
5905 update_byte_crc32(crc, data, table);
5906 z_brct(len, L_mainLoop); // Iterate.
5907
5908 if (invertCRC) {
5909 not_(crc, noreg, false); // ~c
5910 }
5911
5912 bind(L_done);
5913 }
5914
5915 /**
5916 * Emits code to update CRC-32 with a 4-byte value according to constants in table.
5917 * Implementation according to jdk/src/share/native/java/util/zip/zlib-1.2.8/crc32.c.
5918 *
5919 */
5920 void MacroAssembler::update_1word_crc32(Register crc, Register buf, Register table, int bufDisp, int bufInc,
5921 Register t0, Register t1, Register t2, Register t3) {
5922 // This is what we implement (the DOBIG4 part):
5923 //
5924 // #define DOBIG4 c ^= *++buf4; \
5925 // c = crc_table[4][c & 0xff] ^ crc_table[5][(c >> 8) & 0xff] ^ \
5926 // crc_table[6][(c >> 16) & 0xff] ^ crc_table[7][c >> 24]
5927 // #define DOBIG32 DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4
5928 const int ix0 = 4*(4*CRC32_COLUMN_SIZE);
5929 const int ix1 = 5*(4*CRC32_COLUMN_SIZE);
5930 const int ix2 = 6*(4*CRC32_COLUMN_SIZE);
5931 const int ix3 = 7*(4*CRC32_COLUMN_SIZE);
5932
5933 // XOR crc with next four bytes of buffer.
5934 lgr_if_needed(t0, crc);
5935 z_x(t0, Address(buf, bufDisp));
5936 if (bufInc != 0) {
5937 add2reg(buf, bufInc);
5938 }
5939
5940 // Chop crc into 4 single-byte pieces, shifted left 2 bits, to form the table indices.
5941 rotate_then_insert(t3, t0, 56-2, 63-2, 2, true); // ((c >> 0) & 0xff) << 2
5942 rotate_then_insert(t2, t0, 56-2, 63-2, 2-8, true); // ((c >> 8) & 0xff) << 2
5943 rotate_then_insert(t1, t0, 56-2, 63-2, 2-16, true); // ((c >> 16) & 0xff) << 2
5944 rotate_then_insert(t0, t0, 56-2, 63-2, 2-24, true); // ((c >> 24) & 0xff) << 2
5945
5946 // Load pre-calculated table values.
5947 // Use columns 4..7 for big-endian.
5948 z_ly(t3, Address(table, t3, (intptr_t)ix0));
5949 z_ly(t2, Address(table, t2, (intptr_t)ix1));
5950 z_ly(t1, Address(table, t1, (intptr_t)ix2));
5951 z_ly(t0, Address(table, t0, (intptr_t)ix3));
5952
5953 // Calculate new crc from table values.
5954 z_xr(t2, t3);
5955 z_xr(t0, t1);
5956 z_xr(t0, t2); // Now crc contains the final checksum value.
5957 lgr_if_needed(crc, t0);
5958 }
5959
5960 /**
5961 * @param crc register containing existing CRC (32-bit)
5962 * @param buf register pointing to input byte buffer (byte*)
5963 * @param len register containing number of bytes
5964 * @param table register pointing to CRC table
5965 *
5966 * uses Z_R10..Z_R13 as work register. Must be saved/restored by caller!
5967 */
5968 void MacroAssembler::kernel_crc32_2word(Register crc, Register buf, Register len, Register table,
5969 Register t0, Register t1, Register t2, Register t3) {
5970 assert_different_registers(crc, buf, len, table);
5971
5972 Label L_mainLoop, L_tail;
5973 Register data = t0;
5974 Register ctr = Z_R0;
5975 const int mainLoop_stepping = 8;
5976 const int tailLoop_stepping = 1;
5977 const int log_stepping = exact_log2(mainLoop_stepping);
5978
5979 // Don't test for len <= 0 here. This pathological case should not occur anyway.
5980 // Optimizing for it by adding a test and a branch seems to be a waste of CPU cycles.
5981 // The situation itself is detected and handled correctly by the conditional branches
5982 // following aghi(len, -stepping) and aghi(len, +stepping).
5983
5984 not_(crc, noreg, false); // 1s complement of crc
5985
5986 #if 0
5987 {
5988 // Pre-mainLoop alignment did not show any positive effect on performance.
5989 // We leave the code in for reference. Maybe the vector instructions in z13 depend on alignment.
5990
5991 z_cghi(len, mainLoop_stepping); // Alignment is useless for short data streams.
5992 z_brnh(L_tail);
5993
5994 // Align buf to word (4-byte) boundary.
5995 z_lcr(ctr, buf);
5996 rotate_then_insert(ctr, ctr, 62, 63, 0, true); // TODO: should set cc
5997 z_sgfr(len, ctr); // Remaining len after alignment.
5998
5999 update_byteLoop_crc32(crc, buf, ctr, table, data, false);
6000 }
6001 #endif
6002
6003 // Check for short (<mainLoop_stepping bytes) buffer.
6004 z_srag(ctr, len, log_stepping);
6005 z_brnh(L_tail);
6006
6007 z_lrvr(crc, crc); // Revert byte order because we are dealing with big-endian data.
6008 rotate_then_insert(len, len, 64-log_stepping, 63, 0, true); // #bytes for tailLoop
6009
6010 BIND(L_mainLoop);
6011 update_1word_crc32(crc, buf, table, 0, 0, crc, t1, t2, t3);
6012 update_1word_crc32(crc, buf, table, 4, mainLoop_stepping, crc, t1, t2, t3);
6013 z_brct(ctr, L_mainLoop); // Iterate.
6014
6015 z_lrvr(crc, crc); // Revert byte order back to original.
6016
6017 // Process last few (<8) bytes of buffer.
6018 BIND(L_tail);
6019 update_byteLoop_crc32(crc, buf, len, table, data, false);
6020
6021 not_(crc, noreg, false); // 1s complement of crc
6022 }
6023
6024 /**
6025 * @param crc register containing existing CRC (32-bit)
6026 * @param buf register pointing to input byte buffer (byte*)
6027 * @param len register containing number of bytes
6028 * @param table register pointing to CRC table
6029 *
6030 * uses Z_R10..Z_R13 as work register. Must be saved/restored by caller!
6031 */
6032 void MacroAssembler::kernel_crc32_1word(Register crc, Register buf, Register len, Register table,
6033 Register t0, Register t1, Register t2, Register t3) {
6034 assert_different_registers(crc, buf, len, table);
6035
6036 Label L_mainLoop, L_tail;
6037 Register data = t0;
6038 Register ctr = Z_R0;
6039 const int mainLoop_stepping = 4;
6040 const int log_stepping = exact_log2(mainLoop_stepping);
6041
6042 // Don't test for len <= 0 here. This pathological case should not occur anyway.
6043 // Optimizing for it by adding a test and a branch seems to be a waste of CPU cycles.
6044 // The situation itself is detected and handled correctly by the conditional branches
6045 // following aghi(len, -stepping) and aghi(len, +stepping).
6046
6047 not_(crc, noreg, false); // 1s complement of crc
6048
6049 // Check for short (<4 bytes) buffer.
6050 z_srag(ctr, len, log_stepping);
6051 z_brnh(L_tail);
6052
6053 z_lrvr(crc, crc); // Revert byte order because we are dealing with big-endian data.
6054 rotate_then_insert(len, len, 64-log_stepping, 63, 0, true); // #bytes for tailLoop
6055
6056 BIND(L_mainLoop);
6057 update_1word_crc32(crc, buf, table, 0, mainLoop_stepping, crc, t1, t2, t3);
6058 z_brct(ctr, L_mainLoop); // Iterate.
6059 z_lrvr(crc, crc); // Revert byte order back to original.
6060
6061 // Process last few (<8) bytes of buffer.
6062 BIND(L_tail);
6063 update_byteLoop_crc32(crc, buf, len, table, data, false);
6064
6065 not_(crc, noreg, false); // 1s complement of crc
6066 }
6067
6068 /**
6069 * @param crc register containing existing CRC (32-bit)
6070 * @param buf register pointing to input byte buffer (byte*)
6071 * @param len register containing number of bytes
6072 * @param table register pointing to CRC table
6073 */
6074 void MacroAssembler::kernel_crc32_1byte(Register crc, Register buf, Register len, Register table,
6075 Register t0, Register t1, Register t2, Register t3) {
6076 assert_different_registers(crc, buf, len, table);
6077 Register data = t0;
6078
6079 update_byteLoop_crc32(crc, buf, len, table, data, true);
6080 }
6081
6082 void MacroAssembler::kernel_crc32_singleByte(Register crc, Register buf, Register len, Register table, Register tmp) {
6083 assert_different_registers(crc, buf, len, table, tmp);
6084
6085 not_(crc, noreg, false); // ~c
6086
6087 z_llgc(tmp, Address(buf, (intptr_t)0)); // Current byte of input buffer (zero extended). Avoids garbage in upper half of register.
6088 update_byte_crc32(crc, tmp, table);
6089
6090 not_(crc, noreg, false); // ~c
6091 }
6092
6093 //
6094 // Code for BigInteger::multiplyToLen() intrinsic.
6095 //
6096
6097 // dest_lo += src1 + src2
6098 // dest_hi += carry1 + carry2
6099 // Z_R7 is destroyed !
6100 void MacroAssembler::add2_with_carry(Register dest_hi, Register dest_lo,
6101 Register src1, Register src2) {
6102 clear_reg(Z_R7);
6103 z_algr(dest_lo, src1);
6104 z_alcgr(dest_hi, Z_R7);
6105 z_algr(dest_lo, src2);
6106 z_alcgr(dest_hi, Z_R7);
6107 }
6108
6109 // Multiply 64 bit by 64 bit first loop.
6110 void MacroAssembler::multiply_64_x_64_loop(Register x, Register xstart,
6111 Register x_xstart,
6112 Register y, Register y_idx,
6113 Register z,
6114 Register carry,
6115 Register product,
6116 Register idx, Register kdx) {
6117 // jlong carry, x[], y[], z[];
6118 // for (int idx=ystart, kdx=ystart+1+xstart; idx >= 0; idx--, kdx--) {
6119 // huge_128 product = y[idx] * x[xstart] + carry;
6120 // z[kdx] = (jlong)product;
6121 // carry = (jlong)(product >>> 64);
6122 // }
6123 // z[xstart] = carry;
6124
6125 Label L_first_loop, L_first_loop_exit;
6126 Label L_one_x, L_one_y, L_multiply;
6127
6128 z_aghi(xstart, -1);
6129 z_brl(L_one_x); // Special case: length of x is 1.
6130
6131 // Load next two integers of x.
6132 z_sllg(Z_R1_scratch, xstart, LogBytesPerInt);
6133 mem2reg_opt(x_xstart, Address(x, Z_R1_scratch, 0));
6134
6135
6136 bind(L_first_loop);
6137
6138 z_aghi(idx, -1);
6139 z_brl(L_first_loop_exit);
6140 z_aghi(idx, -1);
6141 z_brl(L_one_y);
6142
6143 // Load next two integers of y.
6144 z_sllg(Z_R1_scratch, idx, LogBytesPerInt);
6145 mem2reg_opt(y_idx, Address(y, Z_R1_scratch, 0));
6146
6147
6148 bind(L_multiply);
6149
6150 Register multiplicand = product->successor();
6151 Register product_low = multiplicand;
6152
6153 lgr_if_needed(multiplicand, x_xstart);
6154 z_mlgr(product, y_idx); // multiplicand * y_idx -> product::multiplicand
6155 clear_reg(Z_R7);
6156 z_algr(product_low, carry); // Add carry to result.
6157 z_alcgr(product, Z_R7); // Add carry of the last addition.
6158 add2reg(kdx, -2);
6159
6160 // Store result.
6161 z_sllg(Z_R7, kdx, LogBytesPerInt);
6162 reg2mem_opt(product_low, Address(z, Z_R7, 0));
6163 lgr_if_needed(carry, product);
6164 z_bru(L_first_loop);
6165
6166
6167 bind(L_one_y); // Load one 32 bit portion of y as (0,value).
6168
6169 clear_reg(y_idx);
6170 mem2reg_opt(y_idx, Address(y, (intptr_t) 0), false);
6171 z_bru(L_multiply);
6172
6173
6174 bind(L_one_x); // Load one 32 bit portion of x as (0,value).
6175
6176 clear_reg(x_xstart);
6177 mem2reg_opt(x_xstart, Address(x, (intptr_t) 0), false);
6178 z_bru(L_first_loop);
6179
6180 bind(L_first_loop_exit);
6181 }
6182
6183 // Multiply 64 bit by 64 bit and add 128 bit.
6184 void MacroAssembler::multiply_add_128_x_128(Register x_xstart, Register y,
6185 Register z,
6186 Register yz_idx, Register idx,
6187 Register carry, Register product,
6188 int offset) {
6189 // huge_128 product = (y[idx] * x_xstart) + z[kdx] + carry;
6190 // z[kdx] = (jlong)product;
6191
6192 Register multiplicand = product->successor();
6193 Register product_low = multiplicand;
6194
6195 z_sllg(Z_R7, idx, LogBytesPerInt);
6196 mem2reg_opt(yz_idx, Address(y, Z_R7, offset));
6197
6198 lgr_if_needed(multiplicand, x_xstart);
6199 z_mlgr(product, yz_idx); // multiplicand * yz_idx -> product::multiplicand
6200 mem2reg_opt(yz_idx, Address(z, Z_R7, offset));
6201
6202 add2_with_carry(product, product_low, carry, yz_idx);
6203
6204 z_sllg(Z_R7, idx, LogBytesPerInt);
6205 reg2mem_opt(product_low, Address(z, Z_R7, offset));
6206
6207 }
6208
6209 // Multiply 128 bit by 128 bit. Unrolled inner loop.
6210 void MacroAssembler::multiply_128_x_128_loop(Register x_xstart,
6211 Register y, Register z,
6212 Register yz_idx, Register idx,
6213 Register jdx,
6214 Register carry, Register product,
6215 Register carry2) {
6216 // jlong carry, x[], y[], z[];
6217 // int kdx = ystart+1;
6218 // for (int idx=ystart-2; idx >= 0; idx -= 2) { // Third loop
6219 // huge_128 product = (y[idx+1] * x_xstart) + z[kdx+idx+1] + carry;
6220 // z[kdx+idx+1] = (jlong)product;
6221 // jlong carry2 = (jlong)(product >>> 64);
6222 // product = (y[idx] * x_xstart) + z[kdx+idx] + carry2;
6223 // z[kdx+idx] = (jlong)product;
6224 // carry = (jlong)(product >>> 64);
6225 // }
6226 // idx += 2;
6227 // if (idx > 0) {
6228 // product = (y[idx] * x_xstart) + z[kdx+idx] + carry;
6229 // z[kdx+idx] = (jlong)product;
6230 // carry = (jlong)(product >>> 64);
6231 // }
6232
6233 Label L_third_loop, L_third_loop_exit, L_post_third_loop_done;
6234
6235 // scale the index
6236 lgr_if_needed(jdx, idx);
6237 and_imm(jdx, 0xfffffffffffffffcL);
6238 rshift(jdx, 2);
6239
6240
6241 bind(L_third_loop);
6242
6243 z_aghi(jdx, -1);
6244 z_brl(L_third_loop_exit);
6245 add2reg(idx, -4);
6246
6247 multiply_add_128_x_128(x_xstart, y, z, yz_idx, idx, carry, product, 8);
6248 lgr_if_needed(carry2, product);
6249
6250 multiply_add_128_x_128(x_xstart, y, z, yz_idx, idx, carry2, product, 0);
6251 lgr_if_needed(carry, product);
6252 z_bru(L_third_loop);
6253
6254
6255 bind(L_third_loop_exit); // Handle any left-over operand parts.
6256
6257 and_imm(idx, 0x3);
6258 z_brz(L_post_third_loop_done);
6259
6260 Label L_check_1;
6261
6262 z_aghi(idx, -2);
6263 z_brl(L_check_1);
6264
6265 multiply_add_128_x_128(x_xstart, y, z, yz_idx, idx, carry, product, 0);
6266 lgr_if_needed(carry, product);
6267
6268
6269 bind(L_check_1);
6270
6271 add2reg(idx, 0x2);
6272 and_imm(idx, 0x1);
6273 z_aghi(idx, -1);
6274 z_brl(L_post_third_loop_done);
6275
6276 Register multiplicand = product->successor();
6277 Register product_low = multiplicand;
6278
6279 z_sllg(Z_R7, idx, LogBytesPerInt);
6280 clear_reg(yz_idx);
6281 mem2reg_opt(yz_idx, Address(y, Z_R7, 0), false);
6282 lgr_if_needed(multiplicand, x_xstart);
6283 z_mlgr(product, yz_idx); // multiplicand * yz_idx -> product::multiplicand
6284 clear_reg(yz_idx);
6285 mem2reg_opt(yz_idx, Address(z, Z_R7, 0), false);
6286
6287 add2_with_carry(product, product_low, yz_idx, carry);
6288
6289 z_sllg(Z_R7, idx, LogBytesPerInt);
6290 reg2mem_opt(product_low, Address(z, Z_R7, 0), false);
6291 rshift(product_low, 32);
6292
6293 lshift(product, 32);
6294 z_ogr(product_low, product);
6295 lgr_if_needed(carry, product_low);
6296
6297 bind(L_post_third_loop_done);
6298 }
6299
6300 void MacroAssembler::multiply_to_len(Register x, Register xlen,
6301 Register y, Register ylen,
6302 Register z,
6303 Register tmp1, Register tmp2,
6304 Register tmp3, Register tmp4,
6305 Register tmp5) {
6306 ShortBranchVerifier sbv(this);
6307
6308 assert_different_registers(x, xlen, y, ylen, z,
6309 tmp1, tmp2, tmp3, tmp4, tmp5, Z_R1_scratch, Z_R7);
6310 assert_different_registers(x, xlen, y, ylen, z,
6311 tmp1, tmp2, tmp3, tmp4, tmp5, Z_R8);
6312
6313 z_stmg(Z_R7, Z_R13, _z_abi(gpr7), Z_SP);
6314
6315 // In openJdk, we store the argument as 32-bit value to slot.
6316 Address zlen(Z_SP, _z_abi(remaining_cargs)); // Int in long on big endian.
6317
6318 const Register idx = tmp1;
6319 const Register kdx = tmp2;
6320 const Register xstart = tmp3;
6321
6322 const Register y_idx = tmp4;
6323 const Register carry = tmp5;
6324 const Register product = Z_R0_scratch;
6325 const Register x_xstart = Z_R8;
6326
6327 // First Loop.
6328 //
6329 // final static long LONG_MASK = 0xffffffffL;
6330 // int xstart = xlen - 1;
6331 // int ystart = ylen - 1;
6332 // long carry = 0;
6333 // for (int idx=ystart, kdx=ystart+1+xstart; idx >= 0; idx-, kdx--) {
6334 // long product = (y[idx] & LONG_MASK) * (x[xstart] & LONG_MASK) + carry;
6335 // z[kdx] = (int)product;
6336 // carry = product >>> 32;
6337 // }
6338 // z[xstart] = (int)carry;
6339 //
6340
6341 lgr_if_needed(idx, ylen); // idx = ylen
6342 z_llgf(kdx, zlen); // C2 does not respect int to long conversion for stub calls, thus load zero-extended.
6343 clear_reg(carry); // carry = 0
6344
6345 Label L_done;
6346
6347 lgr_if_needed(xstart, xlen);
6348 z_aghi(xstart, -1);
6349 z_brl(L_done);
6350
6351 multiply_64_x_64_loop(x, xstart, x_xstart, y, y_idx, z, carry, product, idx, kdx);
6352
6353 NearLabel L_second_loop;
6354 compare64_and_branch(kdx, RegisterOrConstant((intptr_t) 0), bcondEqual, L_second_loop);
6355
6356 NearLabel L_carry;
6357 z_aghi(kdx, -1);
6358 z_brz(L_carry);
6359
6360 // Store lower 32 bits of carry.
6361 z_sllg(Z_R1_scratch, kdx, LogBytesPerInt);
6362 reg2mem_opt(carry, Address(z, Z_R1_scratch, 0), false);
6363 rshift(carry, 32);
6364 z_aghi(kdx, -1);
6365
6366
6367 bind(L_carry);
6368
6369 // Store upper 32 bits of carry.
6370 z_sllg(Z_R1_scratch, kdx, LogBytesPerInt);
6371 reg2mem_opt(carry, Address(z, Z_R1_scratch, 0), false);
6372
6373 // Second and third (nested) loops.
6374 //
6375 // for (int i = xstart-1; i >= 0; i--) { // Second loop
6376 // carry = 0;
6377 // for (int jdx=ystart, k=ystart+1+i; jdx >= 0; jdx--, k--) { // Third loop
6378 // long product = (y[jdx] & LONG_MASK) * (x[i] & LONG_MASK) +
6379 // (z[k] & LONG_MASK) + carry;
6380 // z[k] = (int)product;
6381 // carry = product >>> 32;
6382 // }
6383 // z[i] = (int)carry;
6384 // }
6385 //
6386 // i = xlen, j = tmp1, k = tmp2, carry = tmp5, x[i] = rdx
6387
6388 const Register jdx = tmp1;
6389
6390 bind(L_second_loop);
6391
6392 clear_reg(carry); // carry = 0;
6393 lgr_if_needed(jdx, ylen); // j = ystart+1
6394
6395 z_aghi(xstart, -1); // i = xstart-1;
6396 z_brl(L_done);
6397
6398 // Use free slots in the current stackframe instead of push/pop.
6399 Address zsave(Z_SP, _z_abi(carg_1));
6400 reg2mem_opt(z, zsave);
6401
6402
6403 Label L_last_x;
6404
6405 z_sllg(Z_R1_scratch, xstart, LogBytesPerInt);
6406 load_address(z, Address(z, Z_R1_scratch, 4)); // z = z + k - j
6407 z_aghi(xstart, -1); // i = xstart-1;
6408 z_brl(L_last_x);
6409
6410 z_sllg(Z_R1_scratch, xstart, LogBytesPerInt);
6411 mem2reg_opt(x_xstart, Address(x, Z_R1_scratch, 0));
6412
6413
6414 Label L_third_loop_prologue;
6415
6416 bind(L_third_loop_prologue);
6417
6418 Address xsave(Z_SP, _z_abi(carg_2));
6419 Address xlensave(Z_SP, _z_abi(carg_3));
6420 Address ylensave(Z_SP, _z_abi(carg_4));
6421
6422 reg2mem_opt(x, xsave);
6423 reg2mem_opt(xstart, xlensave);
6424 reg2mem_opt(ylen, ylensave);
6425
6426
6427 multiply_128_x_128_loop(x_xstart, y, z, y_idx, jdx, ylen, carry, product, x);
6428
6429 mem2reg_opt(z, zsave);
6430 mem2reg_opt(x, xsave);
6431 mem2reg_opt(xlen, xlensave); // This is the decrement of the loop counter!
6432 mem2reg_opt(ylen, ylensave);
6433
6434 add2reg(tmp3, 1, xlen);
6435 z_sllg(Z_R1_scratch, tmp3, LogBytesPerInt);
6436 reg2mem_opt(carry, Address(z, Z_R1_scratch, 0), false);
6437 z_aghi(tmp3, -1);
6438 z_brl(L_done);
6439
6440 rshift(carry, 32);
6441 z_sllg(Z_R1_scratch, tmp3, LogBytesPerInt);
6442 reg2mem_opt(carry, Address(z, Z_R1_scratch, 0), false);
6443 z_bru(L_second_loop);
6444
6445 // Next infrequent code is moved outside loops.
6446 bind(L_last_x);
6447
6448 clear_reg(x_xstart);
6449 mem2reg_opt(x_xstart, Address(x, (intptr_t) 0), false);
6450 z_bru(L_third_loop_prologue);
6451
6452 bind(L_done);
6453
6454 z_lmg(Z_R7, Z_R13, _z_abi(gpr7), Z_SP);
6455 }
6456
6457 #ifndef PRODUCT
6458 // Assert if CC indicates "not equal" (check_equal==true) or "equal" (check_equal==false).
6459 void MacroAssembler::asm_assert(bool check_equal, const char *msg, int id) {
6460 Label ok;
6461 if (check_equal) {
6462 z_bre(ok);
6463 } else {
6464 z_brne(ok);
6465 }
6466 stop(msg, id);
6467 bind(ok);
6468 }
6469
6470 // Assert if CC indicates "low".
6471 void MacroAssembler::asm_assert_low(const char *msg, int id) {
6472 Label ok;
6473 z_brnl(ok);
6474 stop(msg, id);
6475 bind(ok);
6476 }
6477
6478 // Assert if CC indicates "high".
6479 void MacroAssembler::asm_assert_high(const char *msg, int id) {
6480 Label ok;
6481 z_brnh(ok);
6482 stop(msg, id);
6483 bind(ok);
6484 }
6485
6486 // Assert if CC indicates "not equal" (check_equal==true) or "equal" (check_equal==false)
6487 // generate non-relocatable code.
6488 void MacroAssembler::asm_assert_static(bool check_equal, const char *msg, int id) {
6489 Label ok;
6490 if (check_equal) { z_bre(ok); }
6491 else { z_brne(ok); }
6492 stop_static(msg, id);
6493 bind(ok);
6494 }
6495
6496 void MacroAssembler::asm_assert_mems_zero(bool check_equal, bool allow_relocation, int size, int64_t mem_offset,
6497 Register mem_base, const char* msg, int id) {
6498 switch (size) {
6499 case 4:
6500 load_and_test_int(Z_R0, Address(mem_base, mem_offset));
6501 break;
6502 case 8:
6503 load_and_test_long(Z_R0, Address(mem_base, mem_offset));
6504 break;
6505 default:
6506 ShouldNotReachHere();
6507 }
6508 if (allow_relocation) { asm_assert(check_equal, msg, id); }
6509 else { asm_assert_static(check_equal, msg, id); }
6510 }
6511
6512 // Check the condition
6513 // expected_size == FP - SP
6514 // after transformation:
6515 // expected_size - FP + SP == 0
6516 // Destroys Register expected_size if no tmp register is passed.
6517 void MacroAssembler::asm_assert_frame_size(Register expected_size, Register tmp, const char* msg, int id) {
6518 if (tmp == noreg) {
6519 tmp = expected_size;
6520 } else {
6521 if (tmp != expected_size) {
6522 z_lgr(tmp, expected_size);
6523 }
6524 z_algr(tmp, Z_SP);
6525 z_slg(tmp, 0, Z_R0, Z_SP);
6526 asm_assert_eq(msg, id);
6527 }
6528 }
6529 #endif // !PRODUCT
6530
6531 void MacroAssembler::verify_thread() {
6532 if (VerifyThread) {
6533 unimplemented("", 117);
6534 }
6535 }
6536
6537 // Plausibility check for oops.
6538 void MacroAssembler::verify_oop(Register oop, const char* msg) {
6539 if (!VerifyOops) return;
6540
6541 BLOCK_COMMENT("verify_oop {");
6542 Register tmp = Z_R0;
6543 unsigned int nbytes_save = 6 *8;
6544 address entry = StubRoutines::verify_oop_subroutine_entry_address();
6545 save_return_pc();
6546 push_frame_abi160(nbytes_save);
6547 z_stmg(Z_R0, Z_R5, 160, Z_SP);
6548
6549 z_lgr(Z_ARG2, oop);
6550 load_const(Z_ARG1, (address) msg);
6551 load_const(Z_R1, entry);
6552 z_lg(Z_R1, 0, Z_R1);
6553 call_c(Z_R1);
6554
6555 z_lmg(Z_R0, Z_R5, 160, Z_SP);
6556 pop_frame();
6557
6558 restore_return_pc();
6559 BLOCK_COMMENT("} verify_oop ");
6560 }
6561
6562 const char* MacroAssembler::stop_types[] = {
6563 "stop",
6564 "untested",
6565 "unimplemented",
6566 "shouldnotreachhere"
6567 };
6568
6569 static void stop_on_request(const char* tp, const char* msg) {
6570 tty->print("Z assembly code requires stop: (%s) %s\n", tp, msg);
6571 guarantee(false, "Z assembly code requires stop: %s", msg);
6572 }
6573
6574 void MacroAssembler::stop(int type, const char* msg, int id) {
6575 BLOCK_COMMENT(err_msg("stop: %s {", msg));
6576
6577 // Setup arguments.
6578 load_const(Z_ARG1, (void*) stop_types[type%stop_end]);
6579 load_const(Z_ARG2, (void*) msg);
6580 get_PC(Z_R14); // Following code pushes a frame without entering a new function. Use current pc as return address.
6581 save_return_pc(); // Saves return pc Z_R14.
6582 push_frame_abi160(0);
6583 call_VM_leaf(CAST_FROM_FN_PTR(address, stop_on_request), Z_ARG1, Z_ARG2);
6584 // The plain disassembler does not recognize illtrap. It instead displays
6585 // a 32-bit value. Issueing two illtraps assures the disassembler finds
6586 // the proper beginning of the next instruction.
6587 z_illtrap(); // Illegal instruction.
6588 z_illtrap(); // Illegal instruction.
6589
6590 BLOCK_COMMENT(" } stop");
6591 }
6592
6593 // Special version of stop() for code size reduction.
6594 // Reuses the previously generated call sequence, if any.
6595 // Generates the call sequence on its own, if necessary.
6596 // Note: This code will work only in non-relocatable code!
6597 // The relative address of the data elements (arg1, arg2) must not change.
6598 // The reentry point must not move relative to it's users. This prerequisite
6599 // should be given for "hand-written" code, if all chain calls are in the same code blob.
6600 // Generated code must not undergo any transformation, e.g. ShortenBranches, to be safe.
6601 address MacroAssembler::stop_chain(address reentry, int type, const char* msg, int id, bool allow_relocation) {
6602 BLOCK_COMMENT(err_msg("stop_chain(%s,%s): %s {", reentry==NULL?"init":"cont", allow_relocation?"reloc ":"static", msg));
6603
6604 // Setup arguments.
6605 if (allow_relocation) {
6606 // Relocatable version (for comparison purposes). Remove after some time.
6607 load_const(Z_ARG1, (void*) stop_types[type%stop_end]);
6608 load_const(Z_ARG2, (void*) msg);
6609 } else {
6610 load_absolute_address(Z_ARG1, (address)stop_types[type%stop_end]);
6611 load_absolute_address(Z_ARG2, (address)msg);
6612 }
6613 if ((reentry != NULL) && RelAddr::is_in_range_of_RelAddr16(reentry, pc())) {
6614 BLOCK_COMMENT("branch to reentry point:");
6615 z_brc(bcondAlways, reentry);
6616 } else {
6617 BLOCK_COMMENT("reentry point:");
6618 reentry = pc(); // Re-entry point for subsequent stop calls.
6619 save_return_pc(); // Saves return pc Z_R14.
6620 push_frame_abi160(0);
6621 if (allow_relocation) {
6622 reentry = NULL; // Prevent reentry if code relocation is allowed.
6623 call_VM_leaf(CAST_FROM_FN_PTR(address, stop_on_request), Z_ARG1, Z_ARG2);
6624 } else {
6625 call_VM_leaf_static(CAST_FROM_FN_PTR(address, stop_on_request), Z_ARG1, Z_ARG2);
6626 }
6627 z_illtrap(); // Illegal instruction as emergency stop, should the above call return.
6628 }
6629 BLOCK_COMMENT(" } stop_chain");
6630
6631 return reentry;
6632 }
6633
6634 // Special version of stop() for code size reduction.
6635 // Assumes constant relative addresses for data and runtime call.
6636 void MacroAssembler::stop_static(int type, const char* msg, int id) {
6637 stop_chain(NULL, type, msg, id, false);
6638 }
6639
6640 void MacroAssembler::stop_subroutine() {
6641 unimplemented("stop_subroutine", 710);
6642 }
6643
6644 // Prints msg to stdout from within generated code..
6645 void MacroAssembler::warn(const char* msg) {
6646 RegisterSaver::save_live_registers(this, RegisterSaver::all_registers, Z_R14);
6647 load_absolute_address(Z_R1, (address) warning);
6648 load_absolute_address(Z_ARG1, (address) msg);
6649 (void) call(Z_R1);
6650 RegisterSaver::restore_live_registers(this, RegisterSaver::all_registers);
6651 }
6652
6653 #ifndef PRODUCT
6654
6655 // Write pattern 0x0101010101010101 in region [low-before, high+after].
6656 void MacroAssembler::zap_from_to(Register low, Register high, Register val, Register addr, int before, int after) {
6657 if (!ZapEmptyStackFields) return;
6658 BLOCK_COMMENT("zap memory region {");
6659 load_const_optimized(val, 0x0101010101010101);
6660 int size = before + after;
6661 if (low == high && size < 5 && size > 0) {
6662 int offset = -before*BytesPerWord;
6663 for (int i = 0; i < size; ++i) {
6664 z_stg(val, Address(low, offset));
6665 offset +=(1*BytesPerWord);
6666 }
6667 } else {
6668 add2reg(addr, -before*BytesPerWord, low);
6669 if (after) {
6670 #ifdef ASSERT
6671 jlong check = after * BytesPerWord;
6672 assert(Immediate::is_simm32(check) && Immediate::is_simm32(-check), "value not encodable !");
6673 #endif
6674 add2reg(high, after * BytesPerWord);
6675 }
6676 NearLabel loop;
6677 bind(loop);
6678 z_stg(val, Address(addr));
6679 add2reg(addr, 8);
6680 compare64_and_branch(addr, high, bcondNotHigh, loop);
6681 if (after) {
6682 add2reg(high, -after * BytesPerWord);
6683 }
6684 }
6685 BLOCK_COMMENT("} zap memory region");
6686 }
6687 #endif // !PRODUCT
6688
6689 SkipIfEqual::SkipIfEqual(MacroAssembler* masm, const bool* flag_addr, bool value, Register _rscratch) {
6690 _masm = masm;
6691 _masm->load_absolute_address(_rscratch, (address)flag_addr);
6692 _masm->load_and_test_int(_rscratch, Address(_rscratch));
6693 if (value) {
6694 _masm->z_brne(_label); // Skip if true, i.e. != 0.
6695 } else {
6696 _masm->z_bre(_label); // Skip if false, i.e. == 0.
6697 }
6698 }
6699
6700 SkipIfEqual::~SkipIfEqual() {
6701 _masm->bind(_label);
6702 }