--- old/./.hgignore 2018-01-25 22:27:16.860570303 +0100
+++ new/./.hgignore 2018-01-25 22:27:16.672569371 +0100
@@ -1,4 +1,5 @@
^build/
+^.build/
^dist/
^.idea/
nbproject/private/
--- old/doc/building.html 2018-01-25 22:27:17.372572842 +0100
+++ new/doc/building.html 2018-01-25 22:27:17.184571910 +0100
@@ -56,10 +56,10 @@
ALSA libffi Other Tooling Requirements
+Build Tools Requirements Running Configure
Common Configure Arguments If you are eager to try out building OpenJDK, these simple steps works most of the time. They assume that you have installed Mercurial (and Cygwin if running on Windows) and cloned the top-level OpenJDK repository that you want to build.
Get the complete source code :hg clone http://hg.openjdk.java.net/jdk10/master
hg clone http://hg.openjdk.java.net/jdk/jdk Run configure :bash configure
-If configure fails due to missing dependencies (to either the toolchain , external libraries or the boot JDK ), most of the time it prints a suggestion on how to resolve the situation on your platform. Follow the instructions, and try running bash configure again.
If configure fails due to missing dependencies (to either the toolchain , build tools , external libraries or the boot JDK ), most of the time it prints a suggestion on how to resolve the situation on your platform. Follow the instructions, and try running bash configure again.
Run make :make images
Verify your newly built JDK:
OpenJDK requires GNU Make 4.0 or greater on Windows. This is usually not a problem, since Cygwin currently only distributes GNU Make at a version above 4.0.
Apart from the basic Cygwin installation, the following packages must also be installed:
Often, you can install these packages using the following command line:
-<path to Cygwin setup>/setup-x86_64 -q -P make -P unzip -P zip<path to Cygwin setup>/setup-x86_64 -q -P autoconf -P make -P unzip -P zipUnfortunately, Cygwin can be unreliable in certain circumstances. If you experience build tool crashes or strange issues when building on Windows, please check the Cygwin FAQ on the "BLODA" list and the section on fork() failures .
Solaris
See make/devkit/solaris11.1-package-list.txt for a list of recommended packages to install when building on Solaris. The versions specified in this list is the versions used by the daily builds at Oracle, and is likely to work properly.
@@ -424,7 +425,17 @@
To install on an rpm-based Linux, try running sudo yum install libffi-devel.
Use --with-libffi=<path> if configure does not properly locate your libffi files.
-
+
+Autoconf
+OpenJDK requires Autoconf on all platforms. At least version 2.69 is required.
+
+To install on an apt-based Linux, try running sudo apt-get install autoconf.
+To install on an rpm-based Linux, try running sudo yum install autoconf.
+To install on macOS, try running brew install autoconf.
+To install on Windows, try running <path to Cygwin setup>/setup-x86_64 -q -P autoconf.
+
+If configure has problems locating your installation of autoconf, you can specify it using the AUTOCONF environment variable, like this:
+AUTOCONF=<path to autoconf> configure ...GNU Make
OpenJDK requires GNU Make . No other flavors of make are supported.
At least version 3.81 of GNU Make must be used. For distributions supporting GNU Make 4.0 or above, we strongly recommend it. GNU Make 4.0 contains useful functionality to handle parallel building (supported by --with-output-sync) and speed and stability improvements.
@@ -434,10 +445,6 @@
GNU Bash
OpenJDK requires GNU Bash . No other shells are supported.
At least version 3.2 of GNU Bash must be used.
-Autoconf
-If you want to modify the build system itself, you need to install Autoconf .
-However, if you only need to build OpenJDK or if you only edit the actual OpenJDK source files, there is no dependency on autoconf, since the source distribution includes a pre-generated configure shell script.
-See the section on Autoconf Details for details on how OpenJDK uses autoconf. This is especially important if you plan to contribute changes to OpenJDK that modifies the build system.
To build OpenJDK, you need a "configuration", which consists of a directory where to store the build output, coupled with information about the platform, the specific build machine, and choices that affect how OpenJDK is built.
The configuration is created by the configure script. The basic invocation of the configure script looks like this:
@@ -751,7 +758,12 @@
spawn failed
This can be a sign of a Cygwin problem. See the information about solving problems in the Cygwin section. Rebooting the computer might help temporarily.
Getting Help
-If none of the suggestions in this document helps you, or if you find what you believe is a bug in the build system, please contact the Build Group by sending a mail to build-dev@openjdk.java.net . Please include the relevant parts of the configure and/or build log.
+If none of the suggestions in this document helps you, or if you find what you believe is a bug in the build system, please contact the Build Group by sending a mail to build-dev at openjdk dot java dot net . Please include the relevant parts of the configure and/or build log.
If you need general help or advice about developing for OpenJDK, you can also contact the Adoption Group. See the section on Contributing to OpenJDK for more information.
Hints and Suggestions for Advanced Users
Setting Up a Forest for Pushing Changes (defpath)
@@ -871,15 +883,9 @@
When building for distribution, zipped is a good solution. Binaries built with internal is suitable for use by developers, since they facilitate debugging, but should be stripped before distributed to end users.
Autoconf Details
The configure script is based on the autoconf framework, but in some details deviate from a normal autoconf configure script.
-The configure script in the top level directory of OpenJDK is just a thin wrapper that calls make/autoconf/configure. This in turn provides functionality that is not easily expressed in the normal Autoconf framework, and then calls into the core of the configure script, which is the make/autoconf/generated-configure.sh file.
-As the name implies, this file is generated by Autoconf. It is checked in after regeneration, to alleviate the common user to have to install Autoconf.
-The build system will detect if the Autoconf source files have changed, and will trigger a regeneration of make/autoconf/generated-configure.sh if needed. You can also manually request such an update by bash make/autoconf/autogen.sh.
-If you make changes to the build system that requires a re-generation, note the following:
-
-You must use exactly version 2.69 of autoconf for your patch to be accepted. This is to avoid spurious changes in the generated file. Note that Ubuntu 16.04 ships a patched version of autoconf which claims to be 2.69, but is not.
You do not need to include the generated file in reviews.
If the generated file needs updating, the Oracle JDK closed counter-part will also need to be updated. It is very much appreciated if you ask for an Oracle engineer to sponsor your push so this can be made in tandem.
+The configure script in the top level directory of OpenJDK is just a thin wrapper that calls make/autoconf/configure. This in turn will run autoconf to create the runnable (generated) configure script, as .build/generated-configure.sh. Apart from being responsible for the generation of the runnable script, the configure script also provides functionality that is not easily expressed in the normal Autoconf framework. As part of this functionality, the generated script is called.
+The build system will detect if the Autoconf source files have changed, and will trigger a regeneration of the generated script if needed. You can also manually request such an update by bash configure autogen.
+In previous versions of the OpenJDK, the generated script was checked in at make/autoconf/generated-configure.sh. This is no longer the case.
Developing the Build System Itself
This section contains a few remarks about how to develop for the build system itself. It is not relevant if you are only making changes in the product source code.
While technically using make, the make source files of the OpenJDK does not resemble most other Makefiles. Instead of listing specific targets and actions (perhaps using patterns), the basic modus operandi is to call a high-level function (or properly, macro) from the API in make/common. For instance, to compile all classes in the jdk.internal.foo package in the jdk.foo module, a call like this would be made:
@@ -897,7 +903,7 @@
make COMPARE_BUILD=CONF=--enable-new-hotspot-feature:MAKE=hotspotSee make/InitSupport.gmk for details on how to use COMPARE_BUILD.
To analyze build performance, run with LOG=trace and check $BUILD/build-trace-time.log. Use JOBS=1 to avoid parallelism.
-Please check that you adhere to the Code Conventions for the Build System before submitting patches. Also see the section in Autoconf Details about the generated configure script.
+Please check that you adhere to the Code Conventions for the Build System before submitting patches.
Contributing to OpenJDK
So, now you've build your OpenJDK, and made your first patch, and want to contribute it back to the OpenJDK community.
First of all: Thank you! We gladly welcome your contribution to the OpenJDK. However, please bear in mind that OpenJDK is a massive project, and we must ask you to follow our rules and guidelines to be able to accept your contribution.
--- old/doc/building.md 2018-01-25 22:27:17.920575560 +0100
+++ new/doc/building.md 2018-01-25 22:27:17.772574826 +0100
@@ -7,13 +7,14 @@
on Windows) and cloned the top-level OpenJDK repository that you want to build.
1. [Get the complete source code](#getting-the-source-code): \
- `hg clone http://hg.openjdk.java.net/jdk10/master`
+ `hg clone http://hg.openjdk.java.net/jdk/jdk`
2. [Run configure](#running-configure): \
`bash configure`
If `configure` fails due to missing dependencies (to either the
- [toolchain](#native-compiler-toolchain-requirements), [external libraries](
+ [toolchain](#native-compiler-toolchain-requirements), [build tools](
+ #build-tools-requirements), [external libraries](
#external-library-requirements) or the [boot JDK](#boot-jdk-requirements)),
most of the time it prints a suggestion on how to resolve the situation on
your platform. Follow the instructions, and try running `bash configure`
@@ -195,13 +196,14 @@
Apart from the basic Cygwin installation, the following packages must also be
installed:
+ * `autoconf`
* `make`
* `zip`
* `unzip`
Often, you can install these packages using the following command line:
```
-/setup-x86_64 -q -P make -P unzip -P zip
+/setup-x86_64 -q -P autoconf -P make -P unzip -P zip
```
Unfortunately, Cygwin can be unreliable in certain circumstances. If you
@@ -552,7 +554,27 @@
Use `--with-libffi=` if `configure` does not properly locate your libffi
files.
-## Other Tooling Requirements
+## Build Tools Requirements
+
+### Autoconf
+
+OpenJDK requires [Autoconf](http://www.gnu.org/software/autoconf) on all
+platforms. At least version 2.69 is required.
+
+ * To install on an apt-based Linux, try running `sudo apt-get install
+ autoconf`.
+ * To install on an rpm-based Linux, try running `sudo yum install
+ autoconf`.
+ * To install on macOS, try running `brew install autoconf`.
+ * To install on Windows, try running `/setup-x86_64 -q
+ -P autoconf`.
+
+If `configure` has problems locating your installation of autoconf, you can
+specify it using the `AUTOCONF` environment variable, like this:
+
+```
+AUTOCONF= configure ...
+```
### GNU Make
@@ -585,19 +607,6 @@
At least version 3.2 of GNU Bash must be used.
-### Autoconf
-
-If you want to modify the build system itself, you need to install [Autoconf](
-http://www.gnu.org/software/autoconf).
-
-However, if you only need to build OpenJDK or if you only edit the actual
-OpenJDK source files, there is no dependency on autoconf, since the source
-distribution includes a pre-generated `configure` shell script.
-
-See the section on [Autoconf Details](#autoconf-details) for details on how
-OpenJDK uses autoconf. This is especially important if you plan to contribute
-changes to OpenJDK that modifies the build system.
-
## Running Configure
To build OpenJDK, you need a "configuration", which consists of a directory
@@ -1660,32 +1669,19 @@
deviate from a normal autoconf `configure` script.
The `configure` script in the top level directory of OpenJDK is just a thin
-wrapper that calls `make/autoconf/configure`. This in turn provides
-functionality that is not easily expressed in the normal Autoconf framework,
-and then calls into the core of the `configure` script, which is the
-`make/autoconf/generated-configure.sh` file.
-
-As the name implies, this file is generated by Autoconf. It is checked in after
-regeneration, to alleviate the common user to have to install Autoconf.
+wrapper that calls `make/autoconf/configure`. This in turn will run `autoconf`
+to create the runnable (generated) configure script, as
+`.build/generated-configure.sh`. Apart from being responsible for the
+generation of the runnable script, the `configure` script also provides
+functionality that is not easily expressed in the normal Autoconf framework. As
+part of this functionality, the generated script is called.
The build system will detect if the Autoconf source files have changed, and
-will trigger a regeneration of `make/autoconf/generated-configure.sh` if
-needed. You can also manually request such an update by `bash
-make/autoconf/autogen.sh`.
-
-If you make changes to the build system that requires a re-generation, note the
-following:
-
- * You must use *exactly* version 2.69 of autoconf for your patch to be
- accepted. This is to avoid spurious changes in the generated file. Note
- that Ubuntu 16.04 ships a patched version of autoconf which claims to be
- 2.69, but is not.
-
- * You do not need to include the generated file in reviews.
-
- * If the generated file needs updating, the Oracle JDK closed counter-part
- will also need to be updated. It is very much appreciated if you ask for an
- Oracle engineer to sponsor your push so this can be made in tandem.
+will trigger a regeneration of the generated script if needed. You can also
+manually request such an update by `bash configure autogen`.
+
+In previous versions of the OpenJDK, the generated script was checked in at
+`make/autoconf/generated-configure.sh`. This is no longer the case.
### Developing the Build System Itself
@@ -1736,8 +1732,7 @@
Please check that you adhere to the [Code Conventions for the Build System](
http://openjdk.java.net/groups/build/doc/code-conventions.html) before
-submitting patches. Also see the section in [Autoconf Details](
-#autoconf-details) about the generated configure script.
+submitting patches.
## Contributing to OpenJDK
--- old/make/autoconf/basics.m4 2018-01-25 22:27:18.500578436 +0100
+++ new/make/autoconf/basics.m4 2018-01-25 22:27:18.312577504 +0100
@@ -1,5 +1,5 @@
#
-# Copyright (c) 2011, 2017, Oracle and/or its affiliates. All rights reserved.
+# Copyright (c) 2011, 2018, Oracle and/or its affiliates. All rights reserved.
# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
#
# This code is free software; you can redistribute it and/or modify it
@@ -336,7 +336,6 @@
DATE_WHEN_CONFIGURED=`LANG=C date`
AC_SUBST(DATE_WHEN_CONFIGURED)
AC_MSG_NOTICE([Configuration created at $DATE_WHEN_CONFIGURED.])
- AC_MSG_NOTICE([configure script generated at timestamp $DATE_WHEN_GENERATED.])
])
# Test that variable $1 denoting a program is not empty. If empty, exit with an error.
--- old/make/autoconf/configure 2018-01-25 22:27:19.084581332 +0100
+++ new/make/autoconf/configure 2018-01-25 22:27:18.876580300 +0100
@@ -1,6 +1,6 @@
#!/bin/bash
#
-# Copyright (c) 2012, 2017, Oracle and/or its affiliates. All rights reserved.
+# Copyright (c) 2012, 2018, Oracle and/or its affiliates. All rights reserved.
# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
#
# This code is free software; you can redistribute it and/or modify it
@@ -43,82 +43,138 @@
export CONFIG_SHELL=$BASH
export _as_can_reexec=no
-conf_script_dir="$TOPDIR/make/autoconf"
-
if test "x$CUSTOM_CONFIG_DIR" != x; then
- if test ! -e $CUSTOM_CONFIG_DIR/generated-configure.sh; then
+ custom_hook=$CUSTOM_CONFIG_DIR/custom-hook.m4
+ if test ! -e $custom_hook; then
echo "CUSTOM_CONFIG_DIR not pointing to a proper custom config dir."
echo "Error: Cannot continue" 1>&2
exit 1
fi
+ build_support_dir="$CUSTOM_ROOT/.build"
+else
+ build_support_dir="$TOPDIR/.build"
fi
+conf_script_dir="$TOPDIR/make/autoconf"
+generated_script="$build_support_dir/generated-configure.sh"
+
###
-### Test that the generated configure is up-to-date
+### Use autoconf to create a runnable configure script, if needed
###
-run_autogen_or_fail() {
- if test "x`which autoconf 2> /dev/null | grep -v '^no autoconf in'`" = x; then
- echo "Cannot locate autoconf, unable to correct situation."
- echo "Please install autoconf and run 'bash autogen.sh' to update the generated files."
- echo "Error: Cannot continue" 1>&2
- exit 1
- else
- echo "Running autogen.sh to correct the situation"
- bash $conf_script_dir/autogen.sh
+autoconf_missing_help() {
+ APT_GET="`which apt-get 2> /dev/null | grep -v '^no apt-get in'`"
+ YUM="`which yum 2> /dev/null | grep -v '^no yum in'`"
+ BREW="`which brew 2> /dev/null | grep -v '^no brew in'`"
+ CYGWIN="`which cygpath 2> /dev/null | grep -v '^no cygpath in'`"
+
+ if test "x$APT_GET" != x; then
+ PKGHANDLER_COMMAND="sudo apt-get install autoconf"
+ elif test "x$YUM" != x; then
+ PKGHANDLER_COMMAND="sudo yum install autoconf"
+ elif test "x$BREW" != x; then
+ PKGHANDLER_COMMAND="brew install autoconf"
+ elif test "x$CYGWIN" != x; then
+ PKGHANDLER_COMMAND="( cd && cmd /c setup -q -P autoconf )"
+ fi
+
+ if test "x$PKGHANDLER_COMMAND" != x; then
+ echo "You might be able to fix this by running '$PKGHANDLER_COMMAND'."
fi
}
-check_autoconf_timestamps() {
- for file in $conf_script_dir/configure.ac $conf_script_dir/*.m4 ; do
- if test $file -nt $conf_script_dir/generated-configure.sh; then
- echo "Warning: The configure source files is newer than the generated files."
- run_autogen_or_fail
+generate_configure_script() {
+ if test "x$AUTOCONF" != x; then
+ if test ! -x "$AUTOCONF"; then
+ echo
+ echo "The specified AUTOCONF variable does not point to a valid autoconf executable:"
+ echo "AUTOCONF=$AUTOCONF"
+ echo "Error: Cannot continue" 1>&2
+ exit 1
+ fi
+ else
+ AUTOCONF="`which autoconf 2> /dev/null | grep -v '^no autoconf in'`"
+ if test "x$AUTOCONF" = x; then
+ echo
+ echo "Autoconf is not found on the PATH, and AUTOCONF is not set."
+ echo "You need autoconf to be able to generate a runnable configure script."
+ autoconf_missing_help
+ echo "Error: Cannot find autoconf" 1>&2
+ exit 1
fi
- done
+ fi
+
+ autoconf_version=`$AUTOCONF --version | head -1`
+ echo "Using autoconf at ${AUTOCONF} [$autoconf_version]"
if test "x$CUSTOM_CONFIG_DIR" != x; then
- # If custom source configure is available, make sure it is up-to-date as well.
- for file in $conf_script_dir/configure.ac $conf_script_dir/*.m4 $CUSTOM_CONFIG_DIR/*.m4; do
- if test $file -nt $CUSTOM_CONFIG_DIR/generated-configure.sh; then
- echo "Warning: The configure source files is newer than the custom generated files."
- run_autogen_or_fail
- fi
- done
+ # Generate configure script with custom hooks compiled in.
+ custom_patcher='sed -e "s|#CUSTOM_AUTOCONF_INCLUDE|m4_include([$custom_hook])|"'
+ else
+ custom_patcher='cat'
+ fi
+
+ mkdir -p `dirname $generated_script`
+ # Call autoconf but replace the "magic" variable in configure.ac if requested.
+ cat $conf_script_dir/configure.ac | eval $custom_patcher | \
+ ${AUTOCONF} -W all -I$conf_script_dir - > $generated_script
+ rm -rf autom4te.cache
+
+ # Sanity check
+ if test ! -s $generated_script; then
+ echo "Error: Failed to generate runnable configure script" 1>&2
+ rm -f $generated_script
+ exit 1
fi
}
-check_hg_updates() {
+test_generated_up_to_date() {
if test "x`which hg 2> /dev/null | grep -v '^no hg in'`" != x; then
conf_updated_autoconf_files=`cd $conf_script_dir && hg status -mard . 2> /dev/null`
- if test "x$conf_updated_autoconf_files" != x; then
- echo "Configure source code has been updated, checking time stamps"
- check_autoconf_timestamps
- elif test "x$CUSTOM_CONFIG_DIR" != x; then
- # If custom source configure is available, make sure it is up-to-date as well.
+ conf_source_files="$conf_script_dir/configure.ac $conf_script_dir/*.m4"
+ if test "x$CUSTOM_CONFIG_DIR" != x; then
conf_custom_updated_autoconf_files=`cd $CUSTOM_CONFIG_DIR && hg status -mard . 2> /dev/null`
- if test "x$conf_custom_updated_autoconf_files" != x; then
- echo "Configure custom source code has been updated, checking time stamps"
- check_autoconf_timestamps
- fi
+ conf_custom_source_files="$CUSTOM_CONFIG_DIR/*.m4"
+ else
+ conf_custom_updated_autoconf_files=""
+ conf_custom_source_files=""
+ fi
+
+ if test "x${conf_updated_autoconf_files}${conf_custom_updated_autoconf_files}" != x; then
+ for file in $conf_source_files $conf_custom_source_files ; do
+ if test $file -nt $generated_script; then
+ return 0
+ fi
+ done
fi
fi
+ return 1
}
-# Check for local changes
-check_hg_updates
+run_autoconf=false
+if test "x$1" = xautogen; then
+ # User called us as "configure autogen", so force regeneration
+ run_autoconf=true
+ shift
+fi
-if test "x$CUSTOM_CONFIG_DIR" != x; then
- # Test if open configure is newer than custom configure, if so, custom needs to
- # be regenerated. This test is required to ensure consistency with custom source.
- conf_open_configure_timestamp=`grep DATE_WHEN_GENERATED= $conf_script_dir/generated-configure.sh | cut -d"=" -f 2`
- conf_custom_configure_timestamp=`grep DATE_WHEN_GENERATED= $CUSTOM_CONFIG_DIR/generated-configure.sh | cut -d"=" -f 2`
- if test $conf_open_configure_timestamp -gt $conf_custom_configure_timestamp; then
- echo "Warning: The generated configure file contains changes not present in the custom generated file."
- run_autogen_or_fail
+if test ! -s $generated_script; then
+ # Generated script is missing, so we need to create it
+ echo "Runnable configure script is not present"
+ run_autoconf=true
+else
+ # File is present, but is it up to date?
+ if test_generated_up_to_date; then
+ echo "Runnable configure script is not up to date"
+ run_autoconf=true
fi
fi
+if test "x$run_autoconf" = xtrue; then
+ echo "Generating runnable configure script"
+ generate_configure_script
+fi
+
# Autoconf calls the configure script recursively sometimes.
# Don't start logging twice in that case
if test "x$conf_debug_configure" = xtrue; then
@@ -240,15 +296,6 @@
###
### Call the configure script
###
-if test "x$CUSTOM_CONFIG_DIR" != x; then
- # Custom source configure available; run that instead
- echo "Running custom generated-configure.sh"
- conf_script_to_run=$CUSTOM_CONFIG_DIR/generated-configure.sh
-else
- echo "Running generated-configure.sh"
- conf_script_to_run=$conf_script_dir/generated-configure.sh
-fi
-
if test "x$conf_debug_configure" != x; then
# Turn on shell debug output if requested (initial or recursive)
set -x
@@ -259,7 +306,7 @@
RCDIR=`mktemp -dt jdk-build-configure.tmp.XXXXXX` || exit $?
trap "rm -rf \"$RCDIR\"" EXIT
conf_logfile=./configure.log
-(exec 3>&1 ; ((. $conf_script_to_run "${conf_processed_arguments[@]}" 2>&1 1>&3 ) \
+(exec 3>&1 ; ((. $generated_script "${conf_processed_arguments[@]}" 2>&1 1>&3 ) \
; echo $? > "$RCDIR/rc" ) \
| tee -a $conf_logfile 1>&2 ; exec 3>&-) | tee -a $conf_logfile
@@ -284,7 +331,7 @@
# Print additional help, e.g. a list of toolchains and JVM features.
# This must be done by the autoconf script.
- ( CONFIGURE_PRINT_ADDITIONAL_HELP=true . $conf_script_to_run PRINTF=printf )
+ ( CONFIGURE_PRINT_ADDITIONAL_HELP=true . $generated_script PRINTF=printf )
cat < $OUTPUT_DIR/autoconf << EOF
+#!/bin/bash
+# Get an absolute path to this script
+this_script_dir=\`dirname \$0\`
+this_script_dir=\`cd \$this_script_dir > /dev/null && pwd\`
+
+export M4="\$this_script_dir/usr/bin/m4"
+export AUTOM4TE="\$this_script_dir/usr/bin/autom4te"
+export AUTOCONF="\$this_script_dir/usr/bin/autoconf"
+export AUTOHEADER="\$this_script_dir/usr/bin/autoheader"
+export AC_MACRODIR="\$this_script_dir/usr/share/autoconf"
+export autom4te_perllibdir="\$this_script_dir/usr/share/autoconf"
+
+autom4te_cfg=\$this_script_dir/usr/share/autoconf/autom4te.cfg
+cp \$this_script_dir/autom4te.cfg \$autom4te_cfg
+
+echo 'begin-language: "M4sugar"' >> \$autom4te_cfg
+echo "args: --prepend-include '"\$this_script_dir/usr/share/autoconf"'" >> \$autom4te_cfg
+echo 'end-language: "M4sugar"' >> \$autom4te_cfg
+
+exec \$this_script_dir/usr/bin/autoconf "\$@"
+EOF
+chmod +x $OUTPUT_DIR/autoconf
+cd $OUTPUT_DIR
+tar -cvzf ../$BUNDLE_NAME *
+cd ..
+cp $BUNDLE_NAME "$ORIG_DIR"
--- old/make/autoconf/autogen.sh 2018-01-25 22:27:21.260592122 +0100
+++ /dev/null 2018-01-12 16:15:42.928056668 +0100
@@ -1,81 +0,0 @@
-#!/bin/bash
-#
-# Copyright (c) 2011, 2017, Oracle and/or its affiliates. All rights reserved.
-# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
-#
-# This code is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License version 2 only, as
-# published by the Free Software Foundation.
-#
-# This code is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-# version 2 for more details (a copy is included in the LICENSE file that
-# accompanied this code).
-#
-# You should have received a copy of the GNU General Public License version
-# 2 along with this work; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
-# or visit www.oracle.com if you need additional information or have any
-# questions.
-#
-
-generate_configure_script() {
- # First create a header
- cat > $1 << EOT
-#!/bin/bash
-#
-# ##########################################################
-# ### THIS FILE IS AUTOMATICALLY GENERATED. DO NOT EDIT. ###
-# ##########################################################
-#
-EOT
- # Then replace "magic" variables in configure.ac and append the output
- # from autoconf. $2 is either cat (just a no-op) or a filter.
- cat $script_dir/configure.ac | sed -e "s|@DATE_WHEN_GENERATED@|$TIMESTAMP|" | \
- eval $2 | ${AUTOCONF} -W all -I$script_dir - >> $1
- rm -rf autom4te.cache
-}
-
-script_dir=`dirname $0`
-
-# Create a timestamp as seconds since epoch
-if test "x`uname -s`" = "xSunOS"; then
- TIMESTAMP=`date +%s`
- if test "x$TIMESTAMP" = "x%s"; then
- # date +%s not available on this Solaris, use workaround from nawk(1):
- TIMESTAMP=`nawk 'BEGIN{print srand()}'`
- fi
-else
- TIMESTAMP=`date +%s`
-fi
-
-AUTOCONF="`which autoconf 2> /dev/null | grep -v '^no autoconf in'`"
-
-if test "x${AUTOCONF}" = x; then
- echo "You need autoconf installed to be able to regenerate the configure script"
- echo "Error: Cannot find autoconf" 1>&2
- exit 1
-fi
-
-autoconf_version=`$AUTOCONF --version | head -1`
-echo "Using autoconf at ${AUTOCONF} [$autoconf_version]"
-
-echo "Generating generated-configure.sh"
-generate_configure_script "$script_dir/generated-configure.sh" 'cat'
-
-if test "x$CUSTOM_CONFIG_DIR" != "x"; then
- custom_hook=$CUSTOM_CONFIG_DIR/custom-hook.m4
- if test ! -e $custom_hook; then
- echo "CUSTOM_CONFIG_DIR set but $CUSTOM_CONFIG_DIR/custom-hook.m4 not present"
- echo "Error: Cannot continue" 1>&2
- exit 1
- fi
-
- # We have custom sources available; also generate configure script
- # with custom hooks compiled in.
- echo "Generating custom generated-configure.sh"
- generate_configure_script "$CUSTOM_CONFIG_DIR/generated-configure.sh" 'sed -e "s|#CUSTOM_AUTOCONF_INCLUDE|m4_include([$custom_hook])|"'
-fi
--- old/make/autoconf/generated-configure.sh 2018-01-25 22:27:21.644594026 +0100
+++ /dev/null 2018-01-12 16:15:42.928056668 +0100
@@ -1,70230 +0,0 @@
-#!/bin/bash
-#
-# ##########################################################
-# ### THIS FILE IS AUTOMATICALLY GENERATED. DO NOT EDIT. ###
-# ##########################################################
-#
-#! /bin/sh
-# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.69 for OpenJDK jdk9.
-#
-# Report bugs to .
-#
-#
-# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
-#
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-## -------------------- ##
-## M4sh Initialization. ##
-## -------------------- ##
-
-# Be more Bourne compatible
-DUALCASE=1; export DUALCASE # for MKS sh
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
- emulate sh
- NULLCMD=:
- # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
- setopt NO_GLOB_SUBST
-else
- case `(set -o) 2>/dev/null` in #(
- *posix*) :
- set -o posix ;; #(
- *) :
- ;;
-esac
-fi
-
-
-as_nl='
-'
-export as_nl
-# Printing a long string crashes Solaris 7 /usr/bin/printf.
-as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
-# Prefer a ksh shell builtin over an external printf program on Solaris,
-# but without wasting forks for bash or zsh.
-if test -z "$BASH_VERSION$ZSH_VERSION" \
- && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
- as_echo='print -r --'
- as_echo_n='print -rn --'
-elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
- as_echo='printf %s\n'
- as_echo_n='printf %s'
-else
- if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
- as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
- as_echo_n='/usr/ucb/echo -n'
- else
- as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
- as_echo_n_body='eval
- arg=$1;
- case $arg in #(
- *"$as_nl"*)
- expr "X$arg" : "X\\(.*\\)$as_nl";
- arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
- esac;
- expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
- '
- export as_echo_n_body
- as_echo_n='sh -c $as_echo_n_body as_echo'
- fi
- export as_echo_body
- as_echo='sh -c $as_echo_body as_echo'
-fi
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- PATH_SEPARATOR=:
- (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
- (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
- PATH_SEPARATOR=';'
- }
-fi
-
-
-# IFS
-# We need space, tab and new line, in precisely that order. Quoting is
-# there to prevent editors from complaining about space-tab.
-# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-# splitting by setting IFS to empty value.)
-IFS=" "" $as_nl"
-
-# Find who we are. Look in the path if we contain no directory separator.
-as_myself=
-case $0 in #((
- *[\\/]* ) as_myself=$0 ;;
- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-# We did not find ourselves, most probably we were run as `sh COMMAND'
-# in which case we are not to be found in the path.
-if test "x$as_myself" = x; then
- as_myself=$0
-fi
-if test ! -f "$as_myself"; then
- $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
- exit 1
-fi
-
-# Unset variables that we do not need and which cause bugs (e.g. in
-# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
-# suppresses any "Segmentation fault" message there. '((' could
-# trigger a bug in pdksh 5.2.14.
-for as_var in BASH_ENV ENV MAIL MAILPATH
-do eval test x\${$as_var+set} = xset \
- && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
-done
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-LC_ALL=C
-export LC_ALL
-LANGUAGE=C
-export LANGUAGE
-
-# CDPATH.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-# Use a proper internal environment variable to ensure we don't fall
- # into an infinite loop, continuously re-executing ourselves.
- if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then
- _as_can_reexec=no; export _as_can_reexec;
- # We cannot yet assume a decent shell, so we have to provide a
-# neutralization value for shells without unset; and this also
-# works around shells that cannot unset nonexistent variables.
-# Preserve -v and -x to the replacement shell.
-BASH_ENV=/dev/null
-ENV=/dev/null
-(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
-case $- in # ((((
- *v*x* | *x*v* ) as_opts=-vx ;;
- *v* ) as_opts=-v ;;
- *x* ) as_opts=-x ;;
- * ) as_opts= ;;
-esac
-exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
-# Admittedly, this is quite paranoid, since all the known shells bail
-# out after a failed `exec'.
-$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
-as_fn_exit 255
- fi
- # We don't want this to propagate to other subprocesses.
- { _as_can_reexec=; unset _as_can_reexec;}
-if test "x$CONFIG_SHELL" = x; then
- as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
- emulate sh
- NULLCMD=:
- # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '\${1+\"\$@\"}'='\"\$@\"'
- setopt NO_GLOB_SUBST
-else
- case \`(set -o) 2>/dev/null\` in #(
- *posix*) :
- set -o posix ;; #(
- *) :
- ;;
-esac
-fi
-"
- as_required="as_fn_return () { (exit \$1); }
-as_fn_success () { as_fn_return 0; }
-as_fn_failure () { as_fn_return 1; }
-as_fn_ret_success () { return 0; }
-as_fn_ret_failure () { return 1; }
-
-exitcode=0
-as_fn_success || { exitcode=1; echo as_fn_success failed.; }
-as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
-as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
-as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
-if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
-
-else
- exitcode=1; echo positional parameters were not saved.
-fi
-test x\$exitcode = x0 || exit 1
-test -x / || exit 1"
- as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
- as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
- eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
- test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
-test \$(( 1 + 1 )) = 2 || exit 1"
- if (eval "$as_required") 2>/dev/null; then :
- as_have_required=yes
-else
- as_have_required=no
-fi
- if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
-
-else
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-as_found=false
-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- as_found=:
- case $as_dir in #(
- /*)
- for as_base in sh bash ksh sh5; do
- # Try only shells that exist, to save several forks.
- as_shell=$as_dir/$as_base
- if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
- { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
- CONFIG_SHELL=$as_shell as_have_required=yes
- if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
- break 2
-fi
-fi
- done;;
- esac
- as_found=false
-done
-$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
- { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
- CONFIG_SHELL=$SHELL as_have_required=yes
-fi; }
-IFS=$as_save_IFS
-
-
- if test "x$CONFIG_SHELL" != x; then :
- export CONFIG_SHELL
- # We cannot yet assume a decent shell, so we have to provide a
-# neutralization value for shells without unset; and this also
-# works around shells that cannot unset nonexistent variables.
-# Preserve -v and -x to the replacement shell.
-BASH_ENV=/dev/null
-ENV=/dev/null
-(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
-case $- in # ((((
- *v*x* | *x*v* ) as_opts=-vx ;;
- *v* ) as_opts=-v ;;
- *x* ) as_opts=-x ;;
- * ) as_opts= ;;
-esac
-exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
-# Admittedly, this is quite paranoid, since all the known shells bail
-# out after a failed `exec'.
-$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
-exit 255
-fi
-
- if test x$as_have_required = xno; then :
- $as_echo "$0: This script requires a shell more modern than all"
- $as_echo "$0: the shells that I found on your system."
- if test x${ZSH_VERSION+set} = xset ; then
- $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
- $as_echo "$0: be upgraded to zsh 4.3.4 or later."
- else
- $as_echo "$0: Please tell bug-autoconf@gnu.org and
-$0: build-dev@openjdk.java.net about your system, including
-$0: any error possibly output before this message. Then
-$0: install a modern shell, or manually run the script
-$0: under such a shell if you do have one."
- fi
- exit 1
-fi
-fi
-fi
-SHELL=${CONFIG_SHELL-/bin/sh}
-export SHELL
-# Unset more variables known to interfere with behavior of common tools.
-CLICOLOR_FORCE= GREP_OPTIONS=
-unset CLICOLOR_FORCE GREP_OPTIONS
-
-## --------------------- ##
-## M4sh Shell Functions. ##
-## --------------------- ##
-# as_fn_unset VAR
-# ---------------
-# Portably unset VAR.
-as_fn_unset ()
-{
- { eval $1=; unset $1;}
-}
-as_unset=as_fn_unset
-
-# as_fn_set_status STATUS
-# -----------------------
-# Set $? to STATUS, without forking.
-as_fn_set_status ()
-{
- return $1
-} # as_fn_set_status
-
-# as_fn_exit STATUS
-# -----------------
-# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
-as_fn_exit ()
-{
- set +e
- as_fn_set_status $1
- exit $1
-} # as_fn_exit
-
-# as_fn_mkdir_p
-# -------------
-# Create "$as_dir" as a directory, including parents if necessary.
-as_fn_mkdir_p ()
-{
-
- case $as_dir in #(
- -*) as_dir=./$as_dir;;
- esac
- test -d "$as_dir" || eval $as_mkdir_p || {
- as_dirs=
- while :; do
- case $as_dir in #(
- *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
- *) as_qdir=$as_dir;;
- esac
- as_dirs="'$as_qdir' $as_dirs"
- as_dir=`$as_dirname -- "$as_dir" ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_dir" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- test -d "$as_dir" && break
- done
- test -z "$as_dirs" || eval "mkdir $as_dirs"
- } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
-
-
-} # as_fn_mkdir_p
-
-# as_fn_executable_p FILE
-# -----------------------
-# Test if FILE is an executable regular file.
-as_fn_executable_p ()
-{
- test -f "$1" && test -x "$1"
-} # as_fn_executable_p
-# as_fn_append VAR VALUE
-# ----------------------
-# Append the text in VALUE to the end of the definition contained in VAR. Take
-# advantage of any shell optimizations that allow amortized linear growth over
-# repeated appends, instead of the typical quadratic growth present in naive
-# implementations.
-if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
- eval 'as_fn_append ()
- {
- eval $1+=\$2
- }'
-else
- as_fn_append ()
- {
- eval $1=\$$1\$2
- }
-fi # as_fn_append
-
-# as_fn_arith ARG...
-# ------------------
-# Perform arithmetic evaluation on the ARGs, and store the result in the
-# global $as_val. Take advantage of shells that can avoid forks. The arguments
-# must be portable across $(()) and expr.
-if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
- eval 'as_fn_arith ()
- {
- as_val=$(( $* ))
- }'
-else
- as_fn_arith ()
- {
- as_val=`expr "$@" || test $? -eq 1`
- }
-fi # as_fn_arith
-
-
-# as_fn_error STATUS ERROR [LINENO LOG_FD]
-# ----------------------------------------
-# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
-# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
-# script with STATUS, using 1 if that was 0.
-as_fn_error ()
-{
- as_status=$1; test $as_status -eq 0 && as_status=1
- if test "$4"; then
- as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
- fi
- $as_echo "$as_me: error: $2" >&2
- as_fn_exit $as_status
-} # as_fn_error
-
-if expr a : '\(a\)' >/dev/null 2>&1 &&
- test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
- as_basename=basename
-else
- as_basename=false
-fi
-
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
- as_dirname=dirname
-else
- as_dirname=false
-fi
-
-as_me=`$as_basename -- "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
- X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X/"$0" |
- sed '/^.*\/\([^/][^/]*\)\/*$/{
- s//\1/
- q
- }
- /^X\/\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\/\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
-
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-
- as_lineno_1=$LINENO as_lineno_1a=$LINENO
- as_lineno_2=$LINENO as_lineno_2a=$LINENO
- eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
- test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
- # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-)
- sed -n '
- p
- /[$]LINENO/=
- ' <$as_myself |
- sed '
- s/[$]LINENO.*/&-/
- t lineno
- b
- :lineno
- N
- :loop
- s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
- t loop
- s/-\n.*//
- ' >$as_me.lineno &&
- chmod +x "$as_me.lineno" ||
- { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
-
- # If we had to re-execute with $CONFIG_SHELL, we're ensured to have
- # already done that, so ensure we don't try to do so again and fall
- # in an infinite loop. This has already happened in practice.
- _as_can_reexec=no; export _as_can_reexec
- # Don't try to exec as it changes $[0], causing all sort of problems
- # (the dirname of $[0] is not the place where we might find the
- # original and so on. Autoconf is especially sensitive to this).
- . "./$as_me.lineno"
- # Exit status is that of the last command.
- exit
-}
-
-ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in #(((((
--n*)
- case `echo 'xy\c'` in
- *c*) ECHO_T=' ';; # ECHO_T is single tab character.
- xy) ECHO_C='\c';;
- *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
- ECHO_T=' ';;
- esac;;
-*)
- ECHO_N='-n';;
-esac
-
-rm -f conf$$ conf$$.exe conf$$.file
-if test -d conf$$.dir; then
- rm -f conf$$.dir/conf$$.file
-else
- rm -f conf$$.dir
- mkdir conf$$.dir 2>/dev/null
-fi
-if (echo >conf$$.file) 2>/dev/null; then
- if ln -s conf$$.file conf$$ 2>/dev/null; then
- as_ln_s='ln -s'
- # ... but there are two gotchas:
- # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
- # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
- # In both cases, we have to default to `cp -pR'.
- ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
- as_ln_s='cp -pR'
- elif ln conf$$.file conf$$ 2>/dev/null; then
- as_ln_s=ln
- else
- as_ln_s='cp -pR'
- fi
-else
- as_ln_s='cp -pR'
-fi
-rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-rmdir conf$$.dir 2>/dev/null
-
-if mkdir -p . 2>/dev/null; then
- as_mkdir_p='mkdir -p "$as_dir"'
-else
- test -d ./-p && rmdir ./-p
- as_mkdir_p=false
-fi
-
-as_test_x='test -x'
-as_executable_p=as_fn_executable_p
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-test -n "$DJDIR" || exec 7<&0 &1
-
-# Name of the host.
-# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
-# so uname gets run too.
-ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
-
-#
-# Initializations.
-#
-ac_default_prefix=/usr/local
-ac_clean_files=
-ac_config_libobj_dir=.
-LIBOBJS=
-cross_compiling=no
-subdirs=
-MFLAGS=
-MAKEFLAGS=
-
-# Identity of this package.
-PACKAGE_NAME='OpenJDK'
-PACKAGE_TARNAME='openjdk'
-PACKAGE_VERSION='jdk9'
-PACKAGE_STRING='OpenJDK jdk9'
-PACKAGE_BUGREPORT='build-dev@openjdk.java.net'
-PACKAGE_URL='http://openjdk.java.net'
-
-# Factoring default headers for most tests.
-ac_includes_default="\
-#include
-#ifdef HAVE_SYS_TYPES_H
-# include
-#endif
-#ifdef HAVE_SYS_STAT_H
-# include
-#endif
-#ifdef STDC_HEADERS
-# include
-# include
-#else
-# ifdef HAVE_STDLIB_H
-# include
-# endif
-#endif
-#ifdef HAVE_STRING_H
-# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
-# include
-# endif
-# include
-#endif
-#ifdef HAVE_STRINGS_H
-# include
-#endif
-#ifdef HAVE_INTTYPES_H
-# include
-#endif
-#ifdef HAVE_STDINT_H
-# include
-#endif
-#ifdef HAVE_UNISTD_H
-# include
-#endif"
-
-ac_subst_vars='LTLIBOBJS
-LIBOBJS
-CFLAGS_CCACHE
-CCACHE
-USE_PRECOMPILED_HEADER
-BUILD_ICECC
-ICECC
-ICECC_WRAPPER
-ICECC_CREATE_ENV
-ICECC_CMD
-ENABLE_JAVAC_SERVER
-ENABLE_SJAVAC
-SJAVAC_SERVER_JAVA_FLAGS
-SJAVAC_SERVER_JAVA
-JAVA_TOOL_FLAGS_SMALL
-JAVA_FLAGS_SMALL
-JAVA_FLAGS_JAVAC
-BOOTCYCLE_JVM_ARGS_BIG
-JAVA_FLAGS_BIG
-JAVA_FLAGS
-TEST_JOBS
-JOBS
-MEMORY_SIZE
-NUM_CORES
-ENABLE_GENERATE_CLASSLIST
-BUILD_FAILURE_HANDLER
-ENABLE_INTREE_EC
-VALID_JVM_FEATURES
-JVM_FEATURES_custom
-JVM_FEATURES_zero
-JVM_FEATURES_minimal
-JVM_FEATURES_core
-JVM_FEATURES_client
-JVM_FEATURES_server
-INCLUDE_GRAAL
-STLPORT_LIB
-LIBZIP_CAN_USE_MMAP
-LIBDL
-LIBM
-USE_EXTERNAL_LCMS
-LCMS_LIBS
-LCMS_CFLAGS
-USE_EXTERNAL_LIBZ
-USE_EXTERNAL_LIBPNG
-PNG_LIBS
-PNG_CFLAGS
-USE_EXTERNAL_LIBGIF
-USE_EXTERNAL_LIBJPEG
-LIBFFI_LIB_FILE
-ENABLE_LIBFFI_BUNDLING
-LIBFFI_LIBS
-LIBFFI_CFLAGS
-ALSA_LIBS
-ALSA_CFLAGS
-FREETYPE_LICENSE
-FREETYPE_BUNDLE_LIB_PATH
-FREETYPE_LIBS
-FREETYPE_CFLAGS
-FONTCONFIG_CFLAGS
-CUPS_CFLAGS
-X_EXTRA_LIBS
-X_LIBS
-X_PRE_LIBS
-X_CFLAGS
-XMKMF
-MSVCP_DLL
-MSVCR_DLL
-LIBCXX
-FIXPATH_DETACH_FLAG
-FIXPATH
-BUILD_GTEST
-ENABLE_CDS
-ENABLE_AOT
-ASAN_ENABLED
-GCOV_ENABLED
-ZIP_EXTERNAL_DEBUG_SYMBOLS
-COPY_DEBUG_SYMBOLS
-COMPILE_WITH_DEBUG_SYMBOLS
-CFLAGS_WARNINGS_ARE_ERRORS
-BUILD_CC_DISABLE_WARNING_PREFIX
-DISABLE_WARNING_PREFIX
-WARNINGS_AS_ERRORS
-COMPILER_SUPPORTS_TARGET_BITS_FLAG
-LDFLAGS_TESTEXE
-LDFLAGS_TESTLIB
-CXXFLAGS_TESTEXE
-CXXFLAGS_TESTLIB
-CFLAGS_TESTEXE
-CFLAGS_TESTLIB
-OPENJDK_BUILD_JVM_LIBS
-OPENJDK_BUILD_JVM_ASFLAGS
-OPENJDK_BUILD_JVM_LDFLAGS
-OPENJDK_BUILD_JVM_CFLAGS
-OPENJDK_BUILD_LDFLAGS_NO_EXEC_STACK
-OPENJDK_BUILD_LDFLAGS_HASH_STYLE
-OPENJDK_BUILD_LDFLAGS_CXX_JDK
-OPENJDK_BUILD_JDKEXE_LIBS
-OPENJDK_BUILD_JDKLIB_LIBS
-OPENJDK_BUILD_LDFLAGS_JDKEXE
-OPENJDK_BUILD_LDFLAGS_JDKLIB
-OPENJDK_BUILD_CXXFLAGS_JDKEXE
-OPENJDK_BUILD_CXXFLAGS_JDKLIB
-OPENJDK_BUILD_CFLAGS_JDKEXE
-OPENJDK_BUILD_CFLAGS_JDKLIB
-OPENJDK_BUILD_CXXSTD_CXXFLAG
-JVM_LIBS
-JVM_ASFLAGS
-JVM_LDFLAGS
-JVM_CFLAGS
-LDFLAGS_NO_EXEC_STACK
-LDFLAGS_HASH_STYLE
-LDFLAGS_CXX_JDK
-JDKEXE_LIBS
-JDKLIB_LIBS
-LDFLAGS_JDKEXE
-LDFLAGS_JDKLIB
-CXXFLAGS_JDKEXE
-CXXFLAGS_JDKLIB
-CFLAGS_JDKEXE
-CFLAGS_JDKLIB
-MACOSX_VERSION_MAX
-MACOSX_VERSION_MIN
-CXXSTD_CXXFLAG
-JDK_ARCH_ABI_PROP_NAME
-CXX_O_FLAG_SIZE
-CXX_O_FLAG_NONE
-CXX_O_FLAG_DEBUG
-CXX_O_FLAG_NORM
-CXX_O_FLAG_HI
-CXX_O_FLAG_HIGHEST
-CXX_O_FLAG_HIGHEST_JVM
-C_O_FLAG_SIZE
-C_O_FLAG_NONE
-C_O_FLAG_DEBUG
-C_O_FLAG_NORM
-C_O_FLAG_HI
-C_O_FLAG_HIGHEST
-C_O_FLAG_HIGHEST_JVM
-JVM_CFLAGS_SYMBOLS
-CXXFLAGS_DEBUG_SYMBOLS
-CFLAGS_DEBUG_SYMBOLS
-CXX_FLAG_DEPS
-C_FLAG_DEPS
-SHARED_LIBRARY_FLAGS
-SET_SHARED_LIBRARY_MAPFILE
-SET_SHARED_LIBRARY_NAME
-SET_SHARED_LIBRARY_ORIGIN
-SET_EXECUTABLE_ORIGIN
-CXX_FLAG_REORDER
-C_FLAG_REORDER
-JVM_RCFLAGS
-RC_FLAGS
-AR_OUT_OPTION
-LD_OUT_OPTION
-EXE_OUT_OPTION
-CC_OUT_OPTION
-STRIPFLAGS
-ARFLAGS
-COMPILER_BINDCMD_FILE_FLAG
-COMPILER_COMMAND_FILE_FLAG
-COMPILER_TARGET_BITS_FLAG
-JIB_JAR
-JT_HOME
-JTREGEXE
-HOTSPOT_TOOLCHAIN_TYPE
-USING_BROKEN_SUSE_LD
-PACKAGE_PATH
-BUILD_AS
-BUILD_LDCXX
-BUILD_LD
-BUILD_STRIP
-BUILD_OBJCOPY
-BUILD_AR
-BUILD_NM
-BUILD_CXX
-BUILD_CC
-BUILD_SYSROOT_LDFLAGS
-BUILD_SYSROOT_CFLAGS
-ac_ct_OBJDUMP
-OBJDUMP
-ac_ct_OBJCOPY
-OBJCOPY
-ac_ct_NM
-ac_ct_STRIP
-GNM
-NM
-STRIP
-MSBUILD
-DUMPBIN
-RC
-MT
-INSTALL_NAME_TOOL
-OTOOL
-LIPO
-ac_ct_AR
-AR
-AS
-LDCXX
-LD
-CXXCPP
-CPP
-CXX_VERSION_NUMBER
-CC_VERSION_NUMBER
-ac_ct_CXX
-CXXFLAGS
-CXX
-TOOLCHAIN_PATH_CXX
-POTENTIAL_CXX
-OBJEXT
-EXEEXT
-ac_ct_CC
-CPPFLAGS
-LDFLAGS
-CFLAGS
-CC
-TOOLCHAIN_PATH_CC
-POTENTIAL_CC
-TOOLCHAIN_VERSION
-VS_LIB
-VS_INCLUDE
-VS_PATH
-CYGWIN_LINK
-SYSROOT_LDFLAGS
-SYSROOT_CFLAGS
-EXTRA_LDFLAGS
-EXTRA_CXXFLAGS
-EXTRA_CFLAGS
-EXE_SUFFIX
-OBJ_SUFFIX
-STATIC_LIBRARY
-SHARED_LIBRARY
-STATIC_LIBRARY_SUFFIX
-SHARED_LIBRARY_SUFFIX
-LIBRARY_PREFIX
-TOOLCHAIN_TYPE
-STATIC_BUILD
-IMPORT_MODULES_MAKE
-IMPORT_MODULES_SRC
-IMPORT_MODULES_MAN
-IMPORT_MODULES_LEGAL
-IMPORT_MODULES_CONF
-IMPORT_MODULES_LIBS
-IMPORT_MODULES_CMDS
-IMPORT_MODULES_CLASSES
-EXTERNAL_BUILDJDK
-BUILD_JDK
-CREATE_BUILDJDK
-JLINK
-JMOD
-JAVAC_FLAGS
-BOOT_JDK_SOURCETARGET
-JARSIGNER
-JAR
-JAVADOC
-JAVAC
-JAVA
-BOOT_JDK
-JAVA_CHECK
-JAVAC_CHECK
-VERSION_CLASSFILE_MINOR
-VERSION_CLASSFILE_MAJOR
-VENDOR_VERSION_STRING
-VERSION_DATE
-VERSION_IS_GA
-VERSION_SHORT
-VERSION_STRING
-VERSION_NUMBER_FOUR_POSITIONS
-VERSION_NUMBER
-VERSION_OPT
-VERSION_BUILD
-VERSION_PRE
-VERSION_PATCH
-VERSION_UPDATE
-VERSION_INTERIM
-VERSION_FEATURE
-COMPANY_NAME
-MACOSX_BUNDLE_ID_BASE
-MACOSX_BUNDLE_NAME_BASE
-HOTSPOT_VM_DISTRO
-JDK_RC_PLATFORM_NAME
-PRODUCT_SUFFIX
-PRODUCT_NAME
-LAUNCHER_NAME
-JLINK_KEEP_PACKAGED_MODULES
-COPYRIGHT_YEAR
-COMPRESS_JARS
-INCLUDE_SA
-UNLIMITED_CRYPTO
-CACERTS_FILE
-ENABLE_FULL_DOCS
-ENABLE_HEADLESS_ONLY
-DEFAULT_MAKE_TARGET
-OS_VERSION_MICRO
-OS_VERSION_MINOR
-OS_VERSION_MAJOR
-PKG_CONFIG
-BASH_ARGS
-SETFILE
-CODESIGN
-XATTR
-DSYMUTIL
-IS_GNU_TIME
-PATCH
-DTRACE
-FLOCK
-TIME
-STAT
-HG
-DOT
-READELF
-LDD
-ZIPEXE
-UNZIP
-TAR_SUPPORTS_TRANSFORM
-TAR_INCLUDE_PARAM
-TAR_CREATE_EXTRA_PARAM
-TAR_TYPE
-FIND_DELETE
-OUTPUT_SYNC
-OUTPUT_SYNC_SUPPORTED
-CHECK_TOOLSDIR_MAKE
-CHECK_TOOLSDIR_GMAKE
-CHECK_MAKE
-CHECK_GMAKE
-MAKE
-PKGHANDLER
-CONFIGURESUPPORT_OUTPUTDIR
-OUTPUTDIR
-CONF_NAME
-SPEC
-SDKROOT
-XCODEBUILD
-DEVKIT_LIB_DIR
-JVM_VARIANT_MAIN
-VALID_JVM_VARIANTS
-JVM_VARIANTS
-DEBUG_LEVEL
-HOTSPOT_DEBUG_LEVEL
-JDK_VARIANT
-USERNAME
-TOPDIR
-PATH_SEP
-OPENJDK_BUILD_OS_INCLUDE_SUBDIR
-HOTSPOT_BUILD_CPU_DEFINE
-HOTSPOT_BUILD_CPU_ARCH
-HOTSPOT_BUILD_CPU
-HOTSPOT_BUILD_OS_TYPE
-HOTSPOT_BUILD_OS
-OPENJDK_BUILD_BUNDLE_PLATFORM
-OPENJDK_BUILD_CPU_OSARCH
-OPENJDK_BUILD_CPU_ISADIR
-OPENJDK_BUILD_CPU_LEGACY_LIB
-OPENJDK_BUILD_CPU_LEGACY
-OPENJDK_TARGET_OS_INCLUDE_SUBDIR
-HOTSPOT_TARGET_CPU_DEFINE
-HOTSPOT_TARGET_CPU_ARCH
-HOTSPOT_TARGET_CPU
-HOTSPOT_TARGET_OS_TYPE
-HOTSPOT_TARGET_OS
-DEFINE_CROSS_COMPILE_ARCH
-OPENJDK_TARGET_BUNDLE_PLATFORM
-OPENJDK_TARGET_CPU_OSARCH
-OPENJDK_TARGET_CPU_ISADIR
-OPENJDK_TARGET_CPU_LEGACY_LIB
-OPENJDK_TARGET_CPU_LEGACY
-RELEASE_FILE_OS_ARCH
-RELEASE_FILE_OS_NAME
-OPENJDK_MODULE_TARGET_PLATFORM
-COMPILE_TYPE
-OPENJDK_TARGET_CPU_ENDIAN
-OPENJDK_TARGET_CPU_BITS
-OPENJDK_TARGET_CPU_ARCH
-OPENJDK_TARGET_CPU
-OPENJDK_TARGET_OS_ENV
-OPENJDK_TARGET_OS_TYPE
-OPENJDK_TARGET_OS
-OPENJDK_BUILD_CPU_ENDIAN
-OPENJDK_BUILD_CPU_BITS
-OPENJDK_BUILD_CPU_ARCH
-OPENJDK_BUILD_CPU
-OPENJDK_BUILD_OS_ENV
-OPENJDK_BUILD_OS_TYPE
-OPENJDK_BUILD_OS
-OPENJDK_BUILD_AUTOCONF_NAME
-OPENJDK_TARGET_AUTOCONF_NAME
-target_os
-target_vendor
-target_cpu
-target
-host_os
-host_vendor
-host_cpu
-host
-build_os
-build_vendor
-build_cpu
-build
-PANDOC
-NICE
-CPIO
-DF
-READLINK
-CYGPATH
-SED
-FGREP
-EGREP
-GREP
-AWK
-XARGS
-WHICH
-WC
-UNIQ
-UNAME
-TR
-TOUCH
-TEE
-TAR
-TAIL
-SORT
-SH
-RMDIR
-RM
-PRINTF
-NAWK
-MV
-MKTEMP
-MKDIR
-LS
-LN
-GZIP
-GUNZIP
-HEAD
-FIND
-FILE
-EXPR
-ECHO
-DIRNAME
-DIFF
-DATE
-CUT
-CP
-COMM
-CMP
-CHMOD
-CAT
-BASH
-BASENAME
-DATE_WHEN_CONFIGURED
-ORIGINAL_PATH
-CONFIGURE_COMMAND_LINE
-target_alias
-host_alias
-build_alias
-LIBS
-ECHO_T
-ECHO_N
-ECHO_C
-DEFS
-mandir
-localedir
-libdir
-psdir
-pdfdir
-dvidir
-htmldir
-infodir
-docdir
-oldincludedir
-includedir
-localstatedir
-sharedstatedir
-sysconfdir
-datadir
-datarootdir
-libexecdir
-sbindir
-bindir
-program_transform_name
-prefix
-exec_prefix
-PACKAGE_URL
-PACKAGE_BUGREPORT
-PACKAGE_STRING
-PACKAGE_VERSION
-PACKAGE_TARNAME
-PACKAGE_NAME
-PATH_SEPARATOR
-SHELL'
-ac_subst_files=''
-ac_user_opts='
-enable_option_checking
-with_target_bits
-enable_openjdk_only
-with_custom_make_dir
-with_jdk_variant
-enable_debug
-with_debug_level
-with_jvm_variants
-with_cpu_port
-with_devkit
-with_sys_root
-with_sysroot
-with_tools_dir
-with_toolchain_path
-with_extra_path
-with_sdk_name
-with_conf_name
-with_output_sync
-with_default_make_target
-enable_headless_only
-enable_full_docs
-with_cacerts_file
-enable_unlimited_crypto
-with_copyright_year
-enable_keep_packaged_modules
-with_milestone
-with_update_version
-with_user_release_suffix
-with_build_number
-with_version_major
-with_version_minor
-with_version_security
-with_vendor_name
-with_version_string
-with_version_pre
-with_version_opt
-with_version_build
-with_version_feature
-with_version_interim
-with_version_update
-with_version_patch
-with_version_date
-with_vendor_version_string
-with_boot_jdk
-with_build_jdk
-with_import_modules
-enable_static_build
-with_toolchain_type
-with_extra_cflags
-with_extra_cxxflags
-with_extra_ldflags
-with_toolchain_version
-with_build_devkit
-with_jtreg
-with_jib
-with_abi_profile
-with_macosx_version_max
-enable_warnings_as_errors
-with_native_debug_symbols
-enable_debug_symbols
-enable_zip_debug_info
-enable_native_coverage
-enable_asan
-enable_dtrace
-enable_aot
-enable_cds
-enable_hotspot_gtest
-with_stdc__lib
-with_msvcr_dll
-with_msvcp_dll
-with_x
-with_cups
-with_cups_include
-with_fontconfig
-with_fontconfig_include
-with_freetype
-with_freetype_include
-with_freetype_lib
-with_freetype_src
-enable_freetype_bundling
-with_freetype_license
-with_alsa
-with_alsa_include
-with_alsa_lib
-with_libffi
-with_libffi_include
-with_libffi_lib
-enable_libffi_bundling
-with_libjpeg
-with_giflib
-with_libpng
-with_zlib
-with_lcms
-with_dxsdk
-with_dxsdk_lib
-with_dxsdk_include
-with_jvm_features
-with_jvm_interpreter
-enable_jtreg_failure_handler
-enable_generate_classlist
-with_num_cores
-with_memory_size
-with_jobs
-with_test_jobs
-with_boot_jdk_jvmargs
-with_sjavac_server_java
-enable_sjavac
-enable_javac_server
-enable_icecc
-enable_precompiled_headers
-enable_ccache
-with_ccache_dir
-'
- ac_precious_vars='build_alias
-host_alias
-target_alias
-BASENAME
-BASH
-CAT
-CHMOD
-CMP
-COMM
-CP
-CUT
-DATE
-DIFF
-DIRNAME
-ECHO
-EXPR
-FILE
-FIND
-HEAD
-GUNZIP
-GZIP
-LN
-LS
-MKDIR
-MKTEMP
-MV
-NAWK
-PRINTF
-RM
-RMDIR
-SH
-SORT
-TAIL
-TAR
-TEE
-TOUCH
-TR
-UNAME
-UNIQ
-WC
-WHICH
-XARGS
-AWK
-GREP
-EGREP
-FGREP
-SED
-CYGPATH
-READLINK
-DF
-CPIO
-NICE
-PANDOC
-MAKE
-UNZIP
-ZIPEXE
-LDD
-READELF
-DOT
-HG
-STAT
-TIME
-FLOCK
-DTRACE
-PATCH
-DSYMUTIL
-XATTR
-CODESIGN
-SETFILE
-PKG_CONFIG
-JAVA
-JAVAC
-JAVADOC
-JAR
-JARSIGNER
-CC
-CFLAGS
-LDFLAGS
-LIBS
-CPPFLAGS
-CXX
-CXXFLAGS
-CCC
-CPP
-CXXCPP
-AS
-AR
-LIPO
-OTOOL
-INSTALL_NAME_TOOL
-STRIP
-NM
-GNM
-OBJCOPY
-OBJDUMP
-BUILD_CC
-BUILD_CXX
-BUILD_NM
-BUILD_AR
-BUILD_OBJCOPY
-BUILD_STRIP
-JTREGEXE
-XMKMF
-FREETYPE_CFLAGS
-FREETYPE_LIBS
-ALSA_CFLAGS
-ALSA_LIBS
-LIBFFI_CFLAGS
-LIBFFI_LIBS
-PNG_CFLAGS
-PNG_LIBS
-LCMS_CFLAGS
-LCMS_LIBS
-ICECC_CMD
-ICECC_CREATE_ENV
-ICECC_WRAPPER
-CCACHE'
-
-
-# Initialize some variables set by options.
-ac_init_help=
-ac_init_version=false
-ac_unrecognized_opts=
-ac_unrecognized_sep=
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-cache_file=/dev/null
-exec_prefix=NONE
-no_create=
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-srcdir=
-verbose=
-x_includes=NONE
-x_libraries=NONE
-
-# Installation directory options.
-# These are left unexpanded so users can "make install exec_prefix=/foo"
-# and all the variables that are supposed to be based on exec_prefix
-# by default will actually change.
-# Use braces instead of parens because sh, perl, etc. also accept them.
-# (The list follows the same order as the GNU Coding Standards.)
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datarootdir='${prefix}/share'
-datadir='${datarootdir}'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
-infodir='${datarootdir}/info'
-htmldir='${docdir}'
-dvidir='${docdir}'
-pdfdir='${docdir}'
-psdir='${docdir}'
-libdir='${exec_prefix}/lib'
-localedir='${datarootdir}/locale'
-mandir='${datarootdir}/man'
-
-ac_prev=
-ac_dashdash=
-for ac_option
-do
- # If the previous option needs an argument, assign it.
- if test -n "$ac_prev"; then
- eval $ac_prev=\$ac_option
- ac_prev=
- continue
- fi
-
- case $ac_option in
- *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
- *=) ac_optarg= ;;
- *) ac_optarg=yes ;;
- esac
-
- # Accept the important Cygnus configure options, so we can diagnose typos.
-
- case $ac_dashdash$ac_option in
- --)
- ac_dashdash=yes ;;
-
- -bindir | --bindir | --bindi | --bind | --bin | --bi)
- ac_prev=bindir ;;
- -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
- bindir=$ac_optarg ;;
-
- -build | --build | --buil | --bui | --bu)
- ac_prev=build_alias ;;
- -build=* | --build=* | --buil=* | --bui=* | --bu=*)
- build_alias=$ac_optarg ;;
-
- -cache-file | --cache-file | --cache-fil | --cache-fi \
- | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
- ac_prev=cache_file ;;
- -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
- | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
- cache_file=$ac_optarg ;;
-
- --config-cache | -C)
- cache_file=config.cache ;;
-
- -datadir | --datadir | --datadi | --datad)
- ac_prev=datadir ;;
- -datadir=* | --datadir=* | --datadi=* | --datad=*)
- datadir=$ac_optarg ;;
-
- -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
- | --dataroo | --dataro | --datar)
- ac_prev=datarootdir ;;
- -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
- | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
- datarootdir=$ac_optarg ;;
-
- -disable-* | --disable-*)
- ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- as_fn_error $? "invalid feature name: $ac_useropt"
- ac_useropt_orig=$ac_useropt
- ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
- case $ac_user_opts in
- *"
-"enable_$ac_useropt"
-"*) ;;
- *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
- ac_unrecognized_sep=', ';;
- esac
- eval enable_$ac_useropt=no ;;
-
- -docdir | --docdir | --docdi | --doc | --do)
- ac_prev=docdir ;;
- -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
- docdir=$ac_optarg ;;
-
- -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
- ac_prev=dvidir ;;
- -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
- dvidir=$ac_optarg ;;
-
- -enable-* | --enable-*)
- ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- as_fn_error $? "invalid feature name: $ac_useropt"
- ac_useropt_orig=$ac_useropt
- ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
- case $ac_user_opts in
- *"
-"enable_$ac_useropt"
-"*) ;;
- *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
- ac_unrecognized_sep=', ';;
- esac
- eval enable_$ac_useropt=\$ac_optarg ;;
-
- -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
- | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
- | --exec | --exe | --ex)
- ac_prev=exec_prefix ;;
- -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
- | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
- | --exec=* | --exe=* | --ex=*)
- exec_prefix=$ac_optarg ;;
-
- -gas | --gas | --ga | --g)
- # Obsolete; use --with-gas.
- with_gas=yes ;;
-
- -help | --help | --hel | --he | -h)
- ac_init_help=long ;;
- -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
- ac_init_help=recursive ;;
- -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
- ac_init_help=short ;;
-
- -host | --host | --hos | --ho)
- ac_prev=host_alias ;;
- -host=* | --host=* | --hos=* | --ho=*)
- host_alias=$ac_optarg ;;
-
- -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
- ac_prev=htmldir ;;
- -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
- | --ht=*)
- htmldir=$ac_optarg ;;
-
- -includedir | --includedir | --includedi | --included | --include \
- | --includ | --inclu | --incl | --inc)
- ac_prev=includedir ;;
- -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
- | --includ=* | --inclu=* | --incl=* | --inc=*)
- includedir=$ac_optarg ;;
-
- -infodir | --infodir | --infodi | --infod | --info | --inf)
- ac_prev=infodir ;;
- -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
- infodir=$ac_optarg ;;
-
- -libdir | --libdir | --libdi | --libd)
- ac_prev=libdir ;;
- -libdir=* | --libdir=* | --libdi=* | --libd=*)
- libdir=$ac_optarg ;;
-
- -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
- | --libexe | --libex | --libe)
- ac_prev=libexecdir ;;
- -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
- | --libexe=* | --libex=* | --libe=*)
- libexecdir=$ac_optarg ;;
-
- -localedir | --localedir | --localedi | --localed | --locale)
- ac_prev=localedir ;;
- -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
- localedir=$ac_optarg ;;
-
- -localstatedir | --localstatedir | --localstatedi | --localstated \
- | --localstate | --localstat | --localsta | --localst | --locals)
- ac_prev=localstatedir ;;
- -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
- | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
- localstatedir=$ac_optarg ;;
-
- -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
- ac_prev=mandir ;;
- -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
- mandir=$ac_optarg ;;
-
- -nfp | --nfp | --nf)
- # Obsolete; use --without-fp.
- with_fp=no ;;
-
- -no-create | --no-create | --no-creat | --no-crea | --no-cre \
- | --no-cr | --no-c | -n)
- no_create=yes ;;
-
- -no-recursion | --no-recursion | --no-recursio | --no-recursi \
- | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
- no_recursion=yes ;;
-
- -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
- | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
- | --oldin | --oldi | --old | --ol | --o)
- ac_prev=oldincludedir ;;
- -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
- | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
- | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
- oldincludedir=$ac_optarg ;;
-
- -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
- ac_prev=prefix ;;
- -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
- prefix=$ac_optarg ;;
-
- -program-prefix | --program-prefix | --program-prefi | --program-pref \
- | --program-pre | --program-pr | --program-p)
- ac_prev=program_prefix ;;
- -program-prefix=* | --program-prefix=* | --program-prefi=* \
- | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
- program_prefix=$ac_optarg ;;
-
- -program-suffix | --program-suffix | --program-suffi | --program-suff \
- | --program-suf | --program-su | --program-s)
- ac_prev=program_suffix ;;
- -program-suffix=* | --program-suffix=* | --program-suffi=* \
- | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
- program_suffix=$ac_optarg ;;
-
- -program-transform-name | --program-transform-name \
- | --program-transform-nam | --program-transform-na \
- | --program-transform-n | --program-transform- \
- | --program-transform | --program-transfor \
- | --program-transfo | --program-transf \
- | --program-trans | --program-tran \
- | --progr-tra | --program-tr | --program-t)
- ac_prev=program_transform_name ;;
- -program-transform-name=* | --program-transform-name=* \
- | --program-transform-nam=* | --program-transform-na=* \
- | --program-transform-n=* | --program-transform-=* \
- | --program-transform=* | --program-transfor=* \
- | --program-transfo=* | --program-transf=* \
- | --program-trans=* | --program-tran=* \
- | --progr-tra=* | --program-tr=* | --program-t=*)
- program_transform_name=$ac_optarg ;;
-
- -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
- ac_prev=pdfdir ;;
- -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
- pdfdir=$ac_optarg ;;
-
- -psdir | --psdir | --psdi | --psd | --ps)
- ac_prev=psdir ;;
- -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
- psdir=$ac_optarg ;;
-
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil)
- silent=yes ;;
-
- -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
- ac_prev=sbindir ;;
- -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
- | --sbi=* | --sb=*)
- sbindir=$ac_optarg ;;
-
- -sharedstatedir | --sharedstatedir | --sharedstatedi \
- | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
- | --sharedst | --shareds | --shared | --share | --shar \
- | --sha | --sh)
- ac_prev=sharedstatedir ;;
- -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
- | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
- | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
- | --sha=* | --sh=*)
- sharedstatedir=$ac_optarg ;;
-
- -site | --site | --sit)
- ac_prev=site ;;
- -site=* | --site=* | --sit=*)
- site=$ac_optarg ;;
-
- -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
- ac_prev=srcdir ;;
- -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
- srcdir=$ac_optarg ;;
-
- -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
- | --syscon | --sysco | --sysc | --sys | --sy)
- ac_prev=sysconfdir ;;
- -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
- | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
- sysconfdir=$ac_optarg ;;
-
- -target | --target | --targe | --targ | --tar | --ta | --t)
- ac_prev=target_alias ;;
- -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
- target_alias=$ac_optarg ;;
-
- -v | -verbose | --verbose | --verbos | --verbo | --verb)
- verbose=yes ;;
-
- -version | --version | --versio | --versi | --vers | -V)
- ac_init_version=: ;;
-
- -with-* | --with-*)
- ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- as_fn_error $? "invalid package name: $ac_useropt"
- ac_useropt_orig=$ac_useropt
- ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
- case $ac_user_opts in
- *"
-"with_$ac_useropt"
-"*) ;;
- *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
- ac_unrecognized_sep=', ';;
- esac
- eval with_$ac_useropt=\$ac_optarg ;;
-
- -without-* | --without-*)
- ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- as_fn_error $? "invalid package name: $ac_useropt"
- ac_useropt_orig=$ac_useropt
- ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
- case $ac_user_opts in
- *"
-"with_$ac_useropt"
-"*) ;;
- *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
- ac_unrecognized_sep=', ';;
- esac
- eval with_$ac_useropt=no ;;
-
- --x)
- # Obsolete; use --with-x.
- with_x=yes ;;
-
- -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
- | --x-incl | --x-inc | --x-in | --x-i)
- ac_prev=x_includes ;;
- -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
- | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
- x_includes=$ac_optarg ;;
-
- -x-libraries | --x-libraries | --x-librarie | --x-librari \
- | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
- ac_prev=x_libraries ;;
- -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
- | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
- x_libraries=$ac_optarg ;;
-
- -*) as_fn_error $? "unrecognized option: \`$ac_option'
-Try \`$0 --help' for more information"
- ;;
-
- *=*)
- ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
- # Reject names that are not valid shell variable names.
- case $ac_envvar in #(
- '' | [0-9]* | *[!_$as_cr_alnum]* )
- as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
- esac
- eval $ac_envvar=\$ac_optarg
- export $ac_envvar ;;
-
- *)
- # FIXME: should be removed in autoconf 3.0.
- $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
- expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
- $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
- : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
- ;;
-
- esac
-done
-
-if test -n "$ac_prev"; then
- ac_option=--`echo $ac_prev | sed 's/_/-/g'`
- as_fn_error $? "missing argument to $ac_option"
-fi
-
-if test -n "$ac_unrecognized_opts"; then
- case $enable_option_checking in
- no) ;;
- fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
- *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
- esac
-fi
-
-# Check all directory arguments for consistency.
-for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
- datadir sysconfdir sharedstatedir localstatedir includedir \
- oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
- libdir localedir mandir
-do
- eval ac_val=\$$ac_var
- # Remove trailing slashes.
- case $ac_val in
- */ )
- ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
- eval $ac_var=\$ac_val;;
- esac
- # Be sure to have absolute directory names.
- case $ac_val in
- [\\/$]* | ?:[\\/]* ) continue;;
- NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
- esac
- as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
-done
-
-# There might be people who depend on the old broken behavior: `$host'
-# used to hold the argument of --host etc.
-# FIXME: To remove some day.
-build=$build_alias
-host=$host_alias
-target=$target_alias
-
-# FIXME: To remove some day.
-if test "x$host_alias" != x; then
- if test "x$build_alias" = x; then
- cross_compiling=maybe
- elif test "x$build_alias" != "x$host_alias"; then
- cross_compiling=yes
- fi
-fi
-
-ac_tool_prefix=
-test -n "$host_alias" && ac_tool_prefix=$host_alias-
-
-test "$silent" = yes && exec 6>/dev/null
-
-
-ac_pwd=`pwd` && test -n "$ac_pwd" &&
-ac_ls_di=`ls -di .` &&
-ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
- as_fn_error $? "working directory cannot be determined"
-test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
- as_fn_error $? "pwd does not report name of working directory"
-
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
- ac_srcdir_defaulted=yes
- # Try the directory containing this script, then the parent directory.
- ac_confdir=`$as_dirname -- "$as_myself" ||
-$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_myself" : 'X\(//\)[^/]' \| \
- X"$as_myself" : 'X\(//\)$' \| \
- X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_myself" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- srcdir=$ac_confdir
- if test ! -r "$srcdir/$ac_unique_file"; then
- srcdir=..
- fi
-else
- ac_srcdir_defaulted=no
-fi
-if test ! -r "$srcdir/$ac_unique_file"; then
- test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
- as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
-fi
-ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
-ac_abs_confdir=`(
- cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
- pwd)`
-# When building in place, set srcdir=.
-if test "$ac_abs_confdir" = "$ac_pwd"; then
- srcdir=.
-fi
-# Remove unnecessary trailing slashes from srcdir.
-# Double slashes in file names in object file debugging info
-# mess up M-x gdb in Emacs.
-case $srcdir in
-*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
-esac
-for ac_var in $ac_precious_vars; do
- eval ac_env_${ac_var}_set=\${${ac_var}+set}
- eval ac_env_${ac_var}_value=\$${ac_var}
- eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
- eval ac_cv_env_${ac_var}_value=\$${ac_var}
-done
-
-#
-# Report the --help message.
-#
-if test "$ac_init_help" = "long"; then
- # Omit some internal or obsolete options to make the list less imposing.
- # This message is too long to be a string in the A/UX 3.1 sh.
- cat <<_ACEOF
-\`configure' configures OpenJDK jdk9 to adapt to many kinds of systems.
-
-Usage: $0 [OPTION]... [VAR=VALUE]...
-
-To assign environment variables (e.g., CC, CFLAGS...), specify them as
-VAR=VALUE. See below for descriptions of some of the useful variables.
-
-Defaults for the options are specified in brackets.
-
-Configuration:
- -h, --help display this help and exit
- --help=short display options specific to this package
- --help=recursive display the short help of all the included packages
- -V, --version display version information and exit
- -q, --quiet, --silent do not print \`checking ...' messages
- --cache-file=FILE cache test results in FILE [disabled]
- -C, --config-cache alias for \`--cache-file=config.cache'
- -n, --no-create do not create output files
- --srcdir=DIR find the sources in DIR [configure dir or \`..']
-
-Installation directories:
- --prefix=PREFIX install architecture-independent files in PREFIX
- [$ac_default_prefix]
- --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
- [PREFIX]
-
-By default, \`make install' will install all the files in
-\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
-an installation prefix other than \`$ac_default_prefix' using \`--prefix',
-for instance \`--prefix=\$HOME'.
-
-For better control, use the options below.
-
-Fine tuning of the installation directories:
- --bindir=DIR user executables [EPREFIX/bin]
- --sbindir=DIR system admin executables [EPREFIX/sbin]
- --libexecdir=DIR program executables [EPREFIX/libexec]
- --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
- --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
- --localstatedir=DIR modifiable single-machine data [PREFIX/var]
- --libdir=DIR object code libraries [EPREFIX/lib]
- --includedir=DIR C header files [PREFIX/include]
- --oldincludedir=DIR C header files for non-gcc [/usr/include]
- --datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
- --datadir=DIR read-only architecture-independent data [DATAROOTDIR]
- --infodir=DIR info documentation [DATAROOTDIR/info]
- --localedir=DIR locale-dependent data [DATAROOTDIR/locale]
- --mandir=DIR man documentation [DATAROOTDIR/man]
- --docdir=DIR documentation root [DATAROOTDIR/doc/openjdk]
- --htmldir=DIR html documentation [DOCDIR]
- --dvidir=DIR dvi documentation [DOCDIR]
- --pdfdir=DIR pdf documentation [DOCDIR]
- --psdir=DIR ps documentation [DOCDIR]
-_ACEOF
-
- cat <<\_ACEOF
-
-X features:
- --x-includes=DIR X include files are in DIR
- --x-libraries=DIR X library files are in DIR
-
-System types:
- --build=BUILD configure for building on BUILD [guessed]
- --host=HOST cross-compile to build programs to run on HOST [BUILD]
- --target=TARGET configure for building compilers for TARGET [HOST]
-_ACEOF
-fi
-
-if test -n "$ac_init_help"; then
- case $ac_init_help in
- short | recursive ) echo "Configuration of OpenJDK jdk9:";;
- esac
- cat <<\_ACEOF
-
-Optional Features:
- --disable-option-checking ignore unrecognized --enable/--with options
- --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
- --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
- --enable-openjdk-only suppress building custom source even if present
- [disabled]
- --enable-debug set the debug level to fastdebug (shorthand for
- --with-debug-level=fastdebug) [disabled]
- --enable-headless-only only build headless (no GUI) support [disabled]
- --enable-full-docs build complete documentation [enabled if all tools
- found]
- --disable-unlimited-crypto
- Disable unlimited crypto policy [enabled]
- --disable-keep-packaged-modules
- Do not keep packaged modules in jdk image [enable]
- --enable-static-build enable static library build [disabled]
- --disable-warnings-as-errors
- do not consider native warnings to be an error
- [enabled]
- --enable-debug-symbols Deprecated. Option is kept for backwards
- compatibility and is ignored
- --enable-zip-debug-info Deprecated. Option is kept for backwards
- compatibility and is ignored
- --enable-native-coverage
- enable native compilation with code coverage
- data[disabled]
- --enable-asan enable AddressSanitizer if possible [disabled]
- --enable-dtrace[=yes/no/auto]
- enable dtrace. Default is auto, where dtrace is
- enabled if all dependencies are present.
- --enable-aot[=yes/no/auto]
- enable ahead of time compilation feature. Default is
- auto, where aot is enabled if all dependencies are
- present.
- --enable-cds[=yes/no] enable class data sharing feature in non-minimal VM.
- Default is yes.
- --disable-hotspot-gtest Disables building of the Hotspot unit tests
- [enabled]
- --disable-freetype-bundling
- disable bundling of the freetype library with the
- build result [enabled on Windows or when using
- --with-freetype, disabled otherwise]
- --enable-libffi-bundling
- enable bundling of libffi.so to make the built JDK
- runnable on more systems
- --enable-jtreg-failure-handler
- forces build of the jtreg failure handler to be
- enabled, missing dependencies become fatal errors.
- Default is auto, where the failure handler is built
- if all dependencies are present and otherwise just
- disabled.
- --disable-generate-classlist
- forces enabling or disabling of the generation of a
- CDS classlist at build time. Default is to generate
- it when either the server or client JVMs are built
- and enable-cds is true.
- --enable-sjavac use sjavac to do fast incremental compiles
- [disabled]
- --disable-javac-server disable javac server [enabled]
- --enable-icecc enable distribted compilation of native code using
- icecc/icecream [disabled]
- --disable-precompiled-headers
- disable using precompiled headers when compiling C++
- [enabled]
- --enable-ccache enable using ccache to speed up recompilations
- [disabled]
-
-Optional Packages:
- --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
- --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
- --with-target-bits build 32-bit or 64-bit binaries (for platforms that
- support it), e.g. --with-target-bits=32 [guessed]
- --with-custom-make-dir Deprecated. Option is kept for backwards
- compatibility and is ignored
- --with-jdk-variant JDK variant to build (normal) [normal]
- --with-debug-level set the debug level (release, fastdebug, slowdebug,
- optimized) [release]
- --with-jvm-variants JVM variants (separated by commas) to build
- (server,client,minimal,core,zero,custom) [server]
- --with-cpu-port specify sources to use for Hotspot 64-bit ARM port
- (arm64,aarch64) [aarch64]
- --with-devkit use this devkit for compilers, tools and resources
- --with-sys-root alias for --with-sysroot for backwards compatability
- --with-sysroot use this directory as sysroot
- --with-tools-dir alias for --with-toolchain-path for backwards
- compatibility
- --with-toolchain-path prepend these directories when searching for
- toolchain binaries (compilers etc)
- --with-extra-path prepend these directories to the default path
- --with-sdk-name use the platform SDK of the given name. [macosx]
- --with-conf-name use this as the name of the configuration [generated
- from important configuration options]
- --with-output-sync set make output sync type if supported by make.
- [recurse]
- --with-default-make-target
- set the default make target [exploded-image]
- --with-cacerts-file specify alternative cacerts file
- --with-copyright-year Set copyright year value for build [current year]
- --with-milestone Deprecated. Option is kept for backwards
- compatibility and is ignored
- --with-update-version Deprecated. Option is kept for backwards
- compatibility and is ignored
- --with-user-release-suffix
- Deprecated. Option is kept for backwards
- compatibility and is ignored
- --with-build-number Deprecated. Option is kept for backwards
- compatibility and is ignored
- --with-version-major Deprecated. Option is kept for backwards
- compatibility and is ignored
- --with-version-minor Deprecated. Option is kept for backwards
- compatibility and is ignored
- --with-version-security Deprecated. Option is kept for backwards
- compatibility and is ignored
- --with-vendor-name Set vendor name [not specified]
- --with-version-string Set version string [calculated]
- --with-version-pre Set the base part of the version 'PRE' field
- (pre-release identifier) ['internal']
- --with-version-opt Set version 'OPT' field (build metadata)
- [..]
- --with-version-build Set version 'BUILD' field (build number) [not
- specified]
- --with-version-feature Set version 'FEATURE' field (first number) [current
- source value]
- --with-version-interim Set version 'INTERIM' field (second number) [current
- source value]
- --with-version-update Set version 'UPDATE' field (third number) [current
- source value]
- --with-version-patch Set version 'PATCH' field (fourth number) [not
- specified]
- --with-version-date Set version date [current source value]
- --with-vendor-version-string
- Set vendor version string [not specified]
- --with-boot-jdk path to Boot JDK (used to bootstrap build) [probed]
- --with-build-jdk path to JDK of same version as is being built[the
- newly built JDK]
- --with-import-modules import a set of prebuilt modules either as a zip
- file or an exploded directory
- --with-toolchain-type the toolchain type (or family) to use, use '--help'
- to show possible values [platform dependent]
- --with-extra-cflags extra flags to be used when compiling jdk c-files
- --with-extra-cxxflags extra flags to be used when compiling jdk c++-files
- --with-extra-ldflags extra flags to be used when linking jdk
- --with-toolchain-version
- the version of the toolchain to look for, use
- '--help' to show possible values [platform
- dependent]
- --with-build-devkit Devkit to use for the build platform toolchain
- --with-jtreg Regression Test Harness [probed]
- --with-jib Jib dependency management tool [not used]
- --with-abi-profile specify ABI profile for ARM builds
- (arm-vfp-sflt,arm-vfp-hflt,arm-sflt,
- armv5-vfp-sflt,armv6-vfp-hflt,arm64,aarch64)
- [toolchain dependent]
- --with-macosx-version-max
- error on use of newer functionality. [macosx]
- --with-native-debug-symbols
- set the native debug symbol configuration (none,
- internal, external, zipped) [varying]
- --with-stdc++lib=,,
- force linking of the C++ runtime on Linux to either
- static or dynamic, default is static with dynamic as
- fallback
- --with-msvcr-dll path to microsoft C runtime dll (msvcr*.dll)
- (Windows only) [probed]
- --with-msvcp-dll path to microsoft C++ runtime dll (msvcp*.dll)
- (Windows only) [probed]
- --with-x use the X Window System
- --with-cups specify prefix directory for the cups package
- (expecting the headers under PATH/include)
- --with-cups-include specify directory for the cups include files
- --with-fontconfig specify prefix directory for the fontconfig package
- (expecting the headers under PATH/include)
- --with-fontconfig-include
- specify directory for the fontconfig include files
- --with-freetype specify prefix directory for the freetype package
- (expecting the libraries under PATH/lib and the
- headers under PATH/include)
- --with-freetype-include specify directory for the freetype include files
- --with-freetype-lib specify directory for the freetype library
- --with-freetype-src specify directory with freetype sources to
- automatically build the library (experimental,
- Windows-only)
- --with-freetype-license if bundling freetype, also bundle this license file
- --with-alsa specify prefix directory for the alsa package
- (expecting the libraries under PATH/lib and the
- headers under PATH/include)
- --with-alsa-include specify directory for the alsa include files
- --with-alsa-lib specify directory for the alsa library
- --with-libffi specify prefix directory for the libffi package
- (expecting the libraries under PATH/lib and the
- headers under PATH/include)
- --with-libffi-include specify directory for the libffi include files
- --with-libffi-lib specify directory for the libffi library
- --with-libjpeg use libjpeg from build system or OpenJDK source
- (system, bundled) [bundled]
- --with-giflib use giflib from build system or OpenJDK source
- (system, bundled) [bundled]
- --with-libpng use libpng from build system or OpenJDK source
- (system, bundled) [bundled]
- --with-zlib use zlib from build system or OpenJDK source
- (system, bundled) [bundled]
- --with-lcms use lcms2 from build system or OpenJDK source
- (system, bundled) [bundled]
- --with-dxsdk Deprecated. Option is kept for backwards
- compatibility and is ignored
- --with-dxsdk-lib Deprecated. Option is kept for backwards
- compatibility and is ignored
- --with-dxsdk-include Deprecated. Option is kept for backwards
- compatibility and is ignored
- --with-jvm-features additional JVM features to enable (separated by
- comma), use '--help' to show possible values [none]
- --with-jvm-interpreter Deprecated. Option is kept for backwards
- compatibility and is ignored
- --with-num-cores number of cores in the build system, e.g.
- --with-num-cores=8 [probed]
- --with-memory-size memory (in MB) available in the build system, e.g.
- --with-memory-size=1024 [probed]
- --with-jobs number of parallel jobs to let make run [calculated
- based on cores and memory]
- --with-test-jobs number of parallel tests jobs to run [based on build
- jobs]
- --with-boot-jdk-jvmargs specify JVM arguments to be passed to all java
- invocations of boot JDK, overriding the default
- values, e.g --with-boot-jdk-jvmargs="-Xmx8G
- -enableassertions"
- --with-sjavac-server-java
- use this java binary for running the sjavac
- background server [Boot JDK java]
- --with-ccache-dir where to store ccache files [~/.ccache]
-
-Some influential environment variables:
- BASENAME Override default value for BASENAME
- BASH Override default value for BASH
- CAT Override default value for CAT
- CHMOD Override default value for CHMOD
- CMP Override default value for CMP
- COMM Override default value for COMM
- CP Override default value for CP
- CUT Override default value for CUT
- DATE Override default value for DATE
- DIFF Override default value for DIFF
- DIRNAME Override default value for DIRNAME
- ECHO Override default value for ECHO
- EXPR Override default value for EXPR
- FILE Override default value for FILE
- FIND Override default value for FIND
- HEAD Override default value for HEAD
- GUNZIP Override default value for GUNZIP
- GZIP Override default value for GZIP
- LN Override default value for LN
- LS Override default value for LS
- MKDIR Override default value for MKDIR
- MKTEMP Override default value for MKTEMP
- MV Override default value for MV
- NAWK Override default value for NAWK
- PRINTF Override default value for PRINTF
- RM Override default value for RM
- RMDIR Override default value for RMDIR
- SH Override default value for SH
- SORT Override default value for SORT
- TAIL Override default value for TAIL
- TAR Override default value for TAR
- TEE Override default value for TEE
- TOUCH Override default value for TOUCH
- TR Override default value for TR
- UNAME Override default value for UNAME
- UNIQ Override default value for UNIQ
- WC Override default value for WC
- WHICH Override default value for WHICH
- XARGS Override default value for XARGS
- AWK Override default value for AWK
- GREP Override default value for GREP
- EGREP Override default value for EGREP
- FGREP Override default value for FGREP
- SED Override default value for SED
- CYGPATH Override default value for CYGPATH
- READLINK Override default value for READLINK
- DF Override default value for DF
- CPIO Override default value for CPIO
- NICE Override default value for NICE
- PANDOC Override default value for PANDOC
- MAKE Override default value for MAKE
- UNZIP Override default value for UNZIP
- ZIPEXE Override default value for ZIPEXE
- LDD Override default value for LDD
- READELF Override default value for READELF
- DOT Override default value for DOT
- HG Override default value for HG
- STAT Override default value for STAT
- TIME Override default value for TIME
- FLOCK Override default value for FLOCK
- DTRACE Override default value for DTRACE
- PATCH Override default value for PATCH
- DSYMUTIL Override default value for DSYMUTIL
- XATTR Override default value for XATTR
- CODESIGN Override default value for CODESIGN
- SETFILE Override default value for SETFILE
- PKG_CONFIG path to pkg-config utility
- JAVA Override default value for JAVA
- JAVAC Override default value for JAVAC
- JAVADOC Override default value for JAVADOC
- JAR Override default value for JAR
- JARSIGNER Override default value for JARSIGNER
- CC C compiler command
- CFLAGS C compiler flags
- LDFLAGS linker flags, e.g. -L if you have libraries in a
- nonstandard directory
- LIBS libraries to pass to the linker, e.g. -l
- CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if
- you have headers in a nonstandard directory
- CXX C++ compiler command
- CXXFLAGS C++ compiler flags
- CPP C preprocessor
- CXXCPP C++ preprocessor
- AS Override default value for AS
- AR Override default value for AR
- LIPO Override default value for LIPO
- OTOOL Override default value for OTOOL
- INSTALL_NAME_TOOL
- Override default value for INSTALL_NAME_TOOL
- STRIP Override default value for STRIP
- NM Override default value for NM
- GNM Override default value for GNM
- OBJCOPY Override default value for OBJCOPY
- OBJDUMP Override default value for OBJDUMP
- BUILD_CC Override default value for BUILD_CC
- BUILD_CXX Override default value for BUILD_CXX
- BUILD_NM Override default value for BUILD_NM
- BUILD_AR Override default value for BUILD_AR
- BUILD_OBJCOPY
- Override default value for BUILD_OBJCOPY
- BUILD_STRIP Override default value for BUILD_STRIP
- JTREGEXE Override default value for JTREGEXE
- XMKMF Path to xmkmf, Makefile generator for X Window System
- FREETYPE_CFLAGS
- C compiler flags for FREETYPE, overriding pkg-config
- FREETYPE_LIBS
- linker flags for FREETYPE, overriding pkg-config
- ALSA_CFLAGS C compiler flags for ALSA, overriding pkg-config
- ALSA_LIBS linker flags for ALSA, overriding pkg-config
- LIBFFI_CFLAGS
- C compiler flags for LIBFFI, overriding pkg-config
- LIBFFI_LIBS linker flags for LIBFFI, overriding pkg-config
- PNG_CFLAGS C compiler flags for PNG, overriding pkg-config
- PNG_LIBS linker flags for PNG, overriding pkg-config
- LCMS_CFLAGS C compiler flags for LCMS, overriding pkg-config
- LCMS_LIBS linker flags for LCMS, overriding pkg-config
- ICECC_CMD Override default value for ICECC_CMD
- ICECC_CREATE_ENV
- Override default value for ICECC_CREATE_ENV
- ICECC_WRAPPER
- Override default value for ICECC_WRAPPER
- CCACHE Override default value for CCACHE
-
-Use these variables to override the choices made by `configure' or to help
-it to find libraries and programs with nonstandard names/locations.
-
-Report bugs to .
-OpenJDK home page: .
-_ACEOF
-ac_status=$?
-fi
-
-if test "$ac_init_help" = "recursive"; then
- # If there are subdirs, report their specific --help.
- for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
- test -d "$ac_dir" ||
- { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
- continue
- ac_builddir=.
-
-case "$ac_dir" in
-.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-*)
- ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
- # A ".." for each directory in $ac_dir_suffix.
- ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
- case $ac_top_builddir_sub in
- "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
- *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
- esac ;;
-esac
-ac_abs_top_builddir=$ac_pwd
-ac_abs_builddir=$ac_pwd$ac_dir_suffix
-# for backward compatibility:
-ac_top_builddir=$ac_top_build_prefix
-
-case $srcdir in
- .) # We are building in place.
- ac_srcdir=.
- ac_top_srcdir=$ac_top_builddir_sub
- ac_abs_top_srcdir=$ac_pwd ;;
- [\\/]* | ?:[\\/]* ) # Absolute name.
- ac_srcdir=$srcdir$ac_dir_suffix;
- ac_top_srcdir=$srcdir
- ac_abs_top_srcdir=$srcdir ;;
- *) # Relative name.
- ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
- ac_top_srcdir=$ac_top_build_prefix$srcdir
- ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
-esac
-ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-
- cd "$ac_dir" || { ac_status=$?; continue; }
- # Check for guested configure.
- if test -f "$ac_srcdir/configure.gnu"; then
- echo &&
- $SHELL "$ac_srcdir/configure.gnu" --help=recursive
- elif test -f "$ac_srcdir/configure"; then
- echo &&
- $SHELL "$ac_srcdir/configure" --help=recursive
- else
- $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
- fi || ac_status=$?
- cd "$ac_pwd" || { ac_status=$?; break; }
- done
-fi
-
-test -n "$ac_init_help" && exit $ac_status
-if $ac_init_version; then
- cat <<\_ACEOF
-OpenJDK configure jdk9
-generated by GNU Autoconf 2.69
-
-Copyright (C) 2012 Free Software Foundation, Inc.
-This configure script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it.
-_ACEOF
- exit
-fi
-
-## ------------------------ ##
-## Autoconf initialization. ##
-## ------------------------ ##
-
-# ac_fn_c_try_compile LINENO
-# --------------------------
-# Try to compile conftest.$ac_ext, and return whether this succeeded.
-ac_fn_c_try_compile ()
-{
- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- rm -f conftest.$ac_objext
- if { { ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_compile") 2>conftest.err
- ac_status=$?
- if test -s conftest.err; then
- grep -v '^ *+' conftest.err >conftest.er1
- cat conftest.er1 >&5
- mv -f conftest.er1 conftest.err
- fi
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then :
- ac_retval=0
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_retval=1
-fi
- eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
- as_fn_set_status $ac_retval
-
-} # ac_fn_c_try_compile
-
-# ac_fn_cxx_try_compile LINENO
-# ----------------------------
-# Try to compile conftest.$ac_ext, and return whether this succeeded.
-ac_fn_cxx_try_compile ()
-{
- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- rm -f conftest.$ac_objext
- if { { ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_compile") 2>conftest.err
- ac_status=$?
- if test -s conftest.err; then
- grep -v '^ *+' conftest.err >conftest.er1
- cat conftest.er1 >&5
- mv -f conftest.er1 conftest.err
- fi
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } && {
- test -z "$ac_cxx_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then :
- ac_retval=0
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_retval=1
-fi
- eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
- as_fn_set_status $ac_retval
-
-} # ac_fn_cxx_try_compile
-
-# ac_fn_c_try_cpp LINENO
-# ----------------------
-# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
-ac_fn_c_try_cpp ()
-{
- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- if { { ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
- ac_status=$?
- if test -s conftest.err; then
- grep -v '^ *+' conftest.err >conftest.er1
- cat conftest.er1 >&5
- mv -f conftest.er1 conftest.err
- fi
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } > conftest.i && {
- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
- test ! -s conftest.err
- }; then :
- ac_retval=0
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_retval=1
-fi
- eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
- as_fn_set_status $ac_retval
-
-} # ac_fn_c_try_cpp
-
-# ac_fn_cxx_try_cpp LINENO
-# ------------------------
-# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
-ac_fn_cxx_try_cpp ()
-{
- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- if { { ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
- ac_status=$?
- if test -s conftest.err; then
- grep -v '^ *+' conftest.err >conftest.er1
- cat conftest.er1 >&5
- mv -f conftest.er1 conftest.err
- fi
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } > conftest.i && {
- test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
- test ! -s conftest.err
- }; then :
- ac_retval=0
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_retval=1
-fi
- eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
- as_fn_set_status $ac_retval
-
-} # ac_fn_cxx_try_cpp
-
-# ac_fn_c_try_link LINENO
-# -----------------------
-# Try to link conftest.$ac_ext, and return whether this succeeded.
-ac_fn_c_try_link ()
-{
- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- rm -f conftest.$ac_objext conftest$ac_exeext
- if { { ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_link") 2>conftest.err
- ac_status=$?
- if test -s conftest.err; then
- grep -v '^ *+' conftest.err >conftest.er1
- cat conftest.er1 >&5
- mv -f conftest.er1 conftest.err
- fi
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- test -x conftest$ac_exeext
- }; then :
- ac_retval=0
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_retval=1
-fi
- # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
- # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
- # interfere with the next link command; also delete a directory that is
- # left behind by Apple's compiler. We do this before executing the actions.
- rm -rf conftest.dSYM conftest_ipa8_conftest.oo
- eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
- as_fn_set_status $ac_retval
-
-} # ac_fn_c_try_link
-
-# ac_fn_cxx_check_header_mongrel LINENO HEADER VAR INCLUDES
-# ---------------------------------------------------------
-# Tests whether HEADER exists, giving a warning if it cannot be compiled using
-# the include files in INCLUDES and setting the cache variable VAR
-# accordingly.
-ac_fn_cxx_check_header_mongrel ()
-{
- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- if eval \${$3+:} false; then :
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
-$as_echo_n "checking for $2... " >&6; }
-if eval \${$3+:} false; then :
- $as_echo_n "(cached) " >&6
-fi
-eval ac_res=\$$3
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-else
- # Is the header compilable?
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5
-$as_echo_n "checking $2 usability... " >&6; }
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-$4
-#include <$2>
-_ACEOF
-if ac_fn_cxx_try_compile "$LINENO"; then :
- ac_header_compiler=yes
-else
- ac_header_compiler=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5
-$as_echo "$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5
-$as_echo_n "checking $2 presence... " >&6; }
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <$2>
-_ACEOF
-if ac_fn_cxx_try_cpp "$LINENO"; then :
- ac_header_preproc=yes
-else
- ac_header_preproc=no
-fi
-rm -f conftest.err conftest.i conftest.$ac_ext
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5
-$as_echo "$ac_header_preproc" >&6; }
-
-# So? What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_cxx_preproc_warn_flag in #((
- yes:no: )
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5
-$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
-$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
- ;;
- no:yes:* )
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5
-$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5
-$as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5
-$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5
-$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
-$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
-( $as_echo "## ----------------------------------------- ##
-## Report this to build-dev@openjdk.java.net ##
-## ----------------------------------------- ##"
- ) | sed "s/^/$as_me: WARNING: /" >&2
- ;;
-esac
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
-$as_echo_n "checking for $2... " >&6; }
-if eval \${$3+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- eval "$3=\$ac_header_compiler"
-fi
-eval ac_res=\$$3
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-fi
- eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
-
-} # ac_fn_cxx_check_header_mongrel
-
-# ac_fn_cxx_try_run LINENO
-# ------------------------
-# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes
-# that executables *can* be run.
-ac_fn_cxx_try_run ()
-{
- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- if { { ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_link") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } && { ac_try='./conftest$ac_exeext'
- { { case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; }; then :
- ac_retval=0
-else
- $as_echo "$as_me: program exited with status $ac_status" >&5
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_retval=$ac_status
-fi
- rm -rf conftest.dSYM conftest_ipa8_conftest.oo
- eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
- as_fn_set_status $ac_retval
-
-} # ac_fn_cxx_try_run
-
-# ac_fn_cxx_check_header_compile LINENO HEADER VAR INCLUDES
-# ---------------------------------------------------------
-# Tests whether HEADER exists and can be compiled using the include files in
-# INCLUDES, setting the cache variable VAR accordingly.
-ac_fn_cxx_check_header_compile ()
-{
- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
-$as_echo_n "checking for $2... " >&6; }
-if eval \${$3+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-$4
-#include <$2>
-_ACEOF
-if ac_fn_cxx_try_compile "$LINENO"; then :
- eval "$3=yes"
-else
- eval "$3=no"
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-eval ac_res=\$$3
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
- eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
-
-} # ac_fn_cxx_check_header_compile
-
-# ac_fn_cxx_compute_int LINENO EXPR VAR INCLUDES
-# ----------------------------------------------
-# Tries to find the compile-time value of EXPR in a program that includes
-# INCLUDES, setting VAR accordingly. Returns whether the value could be
-# computed
-ac_fn_cxx_compute_int ()
-{
- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- if test "$cross_compiling" = yes; then
- # Depending upon the size, compute the lo and hi bounds.
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-$4
-int
-main ()
-{
-static int test_array [1 - 2 * !(($2) >= 0)];
-test_array [0] = 0;
-return test_array [0];
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_cxx_try_compile "$LINENO"; then :
- ac_lo=0 ac_mid=0
- while :; do
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-$4
-int
-main ()
-{
-static int test_array [1 - 2 * !(($2) <= $ac_mid)];
-test_array [0] = 0;
-return test_array [0];
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_cxx_try_compile "$LINENO"; then :
- ac_hi=$ac_mid; break
-else
- as_fn_arith $ac_mid + 1 && ac_lo=$as_val
- if test $ac_lo -le $ac_mid; then
- ac_lo= ac_hi=
- break
- fi
- as_fn_arith 2 '*' $ac_mid + 1 && ac_mid=$as_val
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- done
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-$4
-int
-main ()
-{
-static int test_array [1 - 2 * !(($2) < 0)];
-test_array [0] = 0;
-return test_array [0];
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_cxx_try_compile "$LINENO"; then :
- ac_hi=-1 ac_mid=-1
- while :; do
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-$4
-int
-main ()
-{
-static int test_array [1 - 2 * !(($2) >= $ac_mid)];
-test_array [0] = 0;
-return test_array [0];
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_cxx_try_compile "$LINENO"; then :
- ac_lo=$ac_mid; break
-else
- as_fn_arith '(' $ac_mid ')' - 1 && ac_hi=$as_val
- if test $ac_mid -le $ac_hi; then
- ac_lo= ac_hi=
- break
- fi
- as_fn_arith 2 '*' $ac_mid && ac_mid=$as_val
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- done
-else
- ac_lo= ac_hi=
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-# Binary search between lo and hi bounds.
-while test "x$ac_lo" != "x$ac_hi"; do
- as_fn_arith '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo && ac_mid=$as_val
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-$4
-int
-main ()
-{
-static int test_array [1 - 2 * !(($2) <= $ac_mid)];
-test_array [0] = 0;
-return test_array [0];
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_cxx_try_compile "$LINENO"; then :
- ac_hi=$ac_mid
-else
- as_fn_arith '(' $ac_mid ')' + 1 && ac_lo=$as_val
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-done
-case $ac_lo in #((
-?*) eval "$3=\$ac_lo"; ac_retval=0 ;;
-'') ac_retval=1 ;;
-esac
- else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-$4
-static long int longval () { return $2; }
-static unsigned long int ulongval () { return $2; }
-#include
-#include
-int
-main ()
-{
-
- FILE *f = fopen ("conftest.val", "w");
- if (! f)
- return 1;
- if (($2) < 0)
- {
- long int i = longval ();
- if (i != ($2))
- return 1;
- fprintf (f, "%ld", i);
- }
- else
- {
- unsigned long int i = ulongval ();
- if (i != ($2))
- return 1;
- fprintf (f, "%lu", i);
- }
- /* Do not output a trailing newline, as this causes \r\n confusion
- on some platforms. */
- return ferror (f) || fclose (f) != 0;
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_cxx_try_run "$LINENO"; then :
- echo >>conftest.val; read $3 &5
- (eval "$ac_link") 2>conftest.err
- ac_status=$?
- if test -s conftest.err; then
- grep -v '^ *+' conftest.err >conftest.er1
- cat conftest.er1 >&5
- mv -f conftest.er1 conftest.err
- fi
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } && {
- test -z "$ac_cxx_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- test -x conftest$ac_exeext
- }; then :
- ac_retval=0
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_retval=1
-fi
- # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
- # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
- # interfere with the next link command; also delete a directory that is
- # left behind by Apple's compiler. We do this before executing the actions.
- rm -rf conftest.dSYM conftest_ipa8_conftest.oo
- eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
- as_fn_set_status $ac_retval
-
-} # ac_fn_cxx_try_link
-
-# ac_fn_cxx_check_func LINENO FUNC VAR
-# ------------------------------------
-# Tests whether FUNC exists, setting the cache variable VAR accordingly
-ac_fn_cxx_check_func ()
-{
- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
-$as_echo_n "checking for $2... " >&6; }
-if eval \${$3+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-/* Define $2 to an innocuous variant, in case declares $2.
- For example, HP-UX 11i declares gettimeofday. */
-#define $2 innocuous_$2
-
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char $2 (); below.
- Prefer to if __STDC__ is defined, since
- exists even on freestanding compilers. */
-
-#ifdef __STDC__
-# include
-#else
-# include
-#endif
-
-#undef $2
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char $2 ();
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined __stub_$2 || defined __stub___$2
-choke me
-#endif
-
-int
-main ()
-{
-return $2 ();
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_cxx_try_link "$LINENO"; then :
- eval "$3=yes"
-else
- eval "$3=no"
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-fi
-eval ac_res=\$$3
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
- eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
-
-} # ac_fn_cxx_check_func
-
-# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES
-# -------------------------------------------------------
-# Tests whether HEADER exists and can be compiled using the include files in
-# INCLUDES, setting the cache variable VAR accordingly.
-ac_fn_c_check_header_compile ()
-{
- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
-$as_echo_n "checking for $2... " >&6; }
-if eval \${$3+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-$4
-#include <$2>
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- eval "$3=yes"
-else
- eval "$3=no"
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-eval ac_res=\$$3
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
- eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
-
-} # ac_fn_c_check_header_compile
-cat >config.log <<_ACEOF
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-
-It was created by OpenJDK $as_me jdk9, which was
-generated by GNU Autoconf 2.69. Invocation command line was
-
- $ $0 $@
-
-_ACEOF
-exec 5>>config.log
-{
-cat <<_ASUNAME
-## --------- ##
-## Platform. ##
-## --------- ##
-
-hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
-uname -m = `(uname -m) 2>/dev/null || echo unknown`
-uname -r = `(uname -r) 2>/dev/null || echo unknown`
-uname -s = `(uname -s) 2>/dev/null || echo unknown`
-uname -v = `(uname -v) 2>/dev/null || echo unknown`
-
-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
-/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
-
-/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
-/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
-/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown`
-/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
-/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
-/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
-
-_ASUNAME
-
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- $as_echo "PATH: $as_dir"
- done
-IFS=$as_save_IFS
-
-} >&5
-
-cat >&5 <<_ACEOF
-
-
-## ----------- ##
-## Core tests. ##
-## ----------- ##
-
-_ACEOF
-
-
-# Keep a trace of the command line.
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Strip out --silent because we don't want to record it for future runs.
-# Also quote any args containing shell meta-characters.
-# Make two passes to allow for proper duplicate-argument suppression.
-ac_configure_args=
-ac_configure_args0=
-ac_configure_args1=
-ac_must_keep_next=false
-for ac_pass in 1 2
-do
- for ac_arg
- do
- case $ac_arg in
- -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil)
- continue ;;
- *\'*)
- ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
- esac
- case $ac_pass in
- 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
- 2)
- as_fn_append ac_configure_args1 " '$ac_arg'"
- if test $ac_must_keep_next = true; then
- ac_must_keep_next=false # Got value, back to normal.
- else
- case $ac_arg in
- *=* | --config-cache | -C | -disable-* | --disable-* \
- | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
- | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
- | -with-* | --with-* | -without-* | --without-* | --x)
- case "$ac_configure_args0 " in
- "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
- esac
- ;;
- -* ) ac_must_keep_next=true ;;
- esac
- fi
- as_fn_append ac_configure_args " '$ac_arg'"
- ;;
- esac
- done
-done
-{ ac_configure_args0=; unset ac_configure_args0;}
-{ ac_configure_args1=; unset ac_configure_args1;}
-
-# When interrupted or exit'd, cleanup temporary files, and complete
-# config.log. We remove comments because anyway the quotes in there
-# would cause problems or look ugly.
-# WARNING: Use '\'' to represent an apostrophe within the trap.
-# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
-trap 'exit_status=$?
- # Save into config.log some information that might help in debugging.
- {
- echo
-
- $as_echo "## ---------------- ##
-## Cache variables. ##
-## ---------------- ##"
- echo
- # The following way of writing the cache mishandles newlines in values,
-(
- for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
- eval ac_val=\$$ac_var
- case $ac_val in #(
- *${as_nl}*)
- case $ac_var in #(
- *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
-$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
- esac
- case $ac_var in #(
- _ | IFS | as_nl) ;; #(
- BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
- *) { eval $ac_var=; unset $ac_var;} ;;
- esac ;;
- esac
- done
- (set) 2>&1 |
- case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
- *${as_nl}ac_space=\ *)
- sed -n \
- "s/'\''/'\''\\\\'\'''\''/g;
- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
- ;; #(
- *)
- sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
- ;;
- esac |
- sort
-)
- echo
-
- $as_echo "## ----------------- ##
-## Output variables. ##
-## ----------------- ##"
- echo
- for ac_var in $ac_subst_vars
- do
- eval ac_val=\$$ac_var
- case $ac_val in
- *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
- esac
- $as_echo "$ac_var='\''$ac_val'\''"
- done | sort
- echo
-
- if test -n "$ac_subst_files"; then
- $as_echo "## ------------------- ##
-## File substitutions. ##
-## ------------------- ##"
- echo
- for ac_var in $ac_subst_files
- do
- eval ac_val=\$$ac_var
- case $ac_val in
- *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
- esac
- $as_echo "$ac_var='\''$ac_val'\''"
- done | sort
- echo
- fi
-
- if test -s confdefs.h; then
- $as_echo "## ----------- ##
-## confdefs.h. ##
-## ----------- ##"
- echo
- cat confdefs.h
- echo
- fi
- test "$ac_signal" != 0 &&
- $as_echo "$as_me: caught signal $ac_signal"
- $as_echo "$as_me: exit $exit_status"
- } >&5
- rm -f core *.core core.conftest.* &&
- rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
- exit $exit_status
-' 0
-for ac_signal in 1 2 13 15; do
- trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
-done
-ac_signal=0
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -f -r conftest* confdefs.h
-
-$as_echo "/* confdefs.h */" > confdefs.h
-
-# Predefined preprocessor variables.
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_NAME "$PACKAGE_NAME"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_VERSION "$PACKAGE_VERSION"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_STRING "$PACKAGE_STRING"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_URL "$PACKAGE_URL"
-_ACEOF
-
-
-# Let the site file select an alternate cache file if it wants to.
-# Prefer an explicitly selected file to automatically selected ones.
-ac_site_file1=NONE
-ac_site_file2=NONE
-if test -n "$CONFIG_SITE"; then
- # We do not want a PATH search for config.site.
- case $CONFIG_SITE in #((
- -*) ac_site_file1=./$CONFIG_SITE;;
- */*) ac_site_file1=$CONFIG_SITE;;
- *) ac_site_file1=./$CONFIG_SITE;;
- esac
-elif test "x$prefix" != xNONE; then
- ac_site_file1=$prefix/share/config.site
- ac_site_file2=$prefix/etc/config.site
-else
- ac_site_file1=$ac_default_prefix/share/config.site
- ac_site_file2=$ac_default_prefix/etc/config.site
-fi
-for ac_site_file in "$ac_site_file1" "$ac_site_file2"
-do
- test "x$ac_site_file" = xNONE && continue
- if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
-$as_echo "$as_me: loading site script $ac_site_file" >&6;}
- sed 's/^/| /' "$ac_site_file" >&5
- . "$ac_site_file" \
- || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "failed to load site script $ac_site_file
-See \`config.log' for more details" "$LINENO" 5; }
- fi
-done
-
-if test -r "$cache_file"; then
- # Some versions of bash will fail to source /dev/null (special files
- # actually), so we avoid doing that. DJGPP emulates it as a regular file.
- if test /dev/null != "$cache_file" && test -f "$cache_file"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
-$as_echo "$as_me: loading cache $cache_file" >&6;}
- case $cache_file in
- [\\/]* | ?:[\\/]* ) . "$cache_file";;
- *) . "./$cache_file";;
- esac
- fi
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
-$as_echo "$as_me: creating cache $cache_file" >&6;}
- >$cache_file
-fi
-
-# Check that the precious variables saved in the cache have kept the same
-# value.
-ac_cache_corrupted=false
-for ac_var in $ac_precious_vars; do
- eval ac_old_set=\$ac_cv_env_${ac_var}_set
- eval ac_new_set=\$ac_env_${ac_var}_set
- eval ac_old_val=\$ac_cv_env_${ac_var}_value
- eval ac_new_val=\$ac_env_${ac_var}_value
- case $ac_old_set,$ac_new_set in
- set,)
- { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
-$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
- ac_cache_corrupted=: ;;
- ,set)
- { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
-$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
- ac_cache_corrupted=: ;;
- ,);;
- *)
- if test "x$ac_old_val" != "x$ac_new_val"; then
- # differences in whitespace do not lead to failure.
- ac_old_val_w=`echo x $ac_old_val`
- ac_new_val_w=`echo x $ac_new_val`
- if test "$ac_old_val_w" != "$ac_new_val_w"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
-$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
- ac_cache_corrupted=:
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
-$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
- eval $ac_var=\$ac_old_val
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5
-$as_echo "$as_me: former value: \`$ac_old_val'" >&2;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5
-$as_echo "$as_me: current value: \`$ac_new_val'" >&2;}
- fi;;
- esac
- # Pass precious variables to config.status.
- if test "$ac_new_set" = set; then
- case $ac_new_val in
- *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
- *) ac_arg=$ac_var=$ac_new_val ;;
- esac
- case " $ac_configure_args " in
- *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
- *) as_fn_append ac_configure_args " '$ac_arg'" ;;
- esac
- fi
-done
-if $ac_cache_corrupted; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
-$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
- as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
-fi
-## -------------------- ##
-## Main body of script. ##
-## -------------------- ##
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-
-ac_aux_dir=
-for ac_dir in $TOPDIR/make/autoconf/build-aux "$srcdir"/$TOPDIR/make/autoconf/build-aux; do
- if test -f "$ac_dir/install-sh"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install-sh -c"
- break
- elif test -f "$ac_dir/install.sh"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install.sh -c"
- break
- elif test -f "$ac_dir/shtool"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/shtool install -c"
- break
- fi
-done
-if test -z "$ac_aux_dir"; then
- as_fn_error $? "cannot find install-sh, install.sh, or shtool in $TOPDIR/make/autoconf/build-aux \"$srcdir\"/$TOPDIR/make/autoconf/build-aux" "$LINENO" 5
-fi
-
-# These three variables are undocumented and unsupported,
-# and are intended to be withdrawn in a future Autoconf release.
-# They can cause serious problems if a builder's source tree is in a directory
-# whose full name contains unusual characters.
-ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var.
-ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var.
-ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
-
-
-# pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*-
-
-#
-# Copyright (c) 2012, 2013, Oracle and/or its affiliates. All rights reserved.
-# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
-#
-# This code is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License version 2 only, as
-# published by the Free Software Foundation. Oracle designates this
-# particular file as subject to the "Classpath" exception as provided
-# by Oracle in the LICENSE file that accompanied this code.
-#
-# This code is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-# version 2 for more details (a copy is included in the LICENSE file that
-# accompanied this code).
-#
-# You should have received a copy of the GNU General Public License version
-# 2 along with this work; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
-# or visit www.oracle.com if you need additional information or have any
-# questions.
-#
-
-#
-# Copyright © 2004 Scott James Remnant .
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# PKG_PROG_PKG_CONFIG([MIN-VERSION])
-# ----------------------------------
-# PKG_PROG_PKG_CONFIG
-
-# PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
-#
-# Check to see whether a particular set of modules exists. Similar
-# to PKG_CHECK_MODULES(), but does not set variables or print errors.
-#
-#
-# Similar to PKG_CHECK_MODULES, make sure that the first instance of
-# this or PKG_CHECK_MODULES is called, or make sure to call
-# PKG_CHECK_EXISTS manually
-# --------------------------------------------------------------
-
-
-
-# _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES])
-# ---------------------------------------------
-# _PKG_CONFIG
-
-# _PKG_SHORT_ERRORS_SUPPORTED
-# -----------------------------
-# _PKG_SHORT_ERRORS_SUPPORTED
-
-
-# PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND],
-# [ACTION-IF-NOT-FOUND])
-#
-#
-# Note that if there is a possibility the first call to
-# PKG_CHECK_MODULES might not happen, you should be sure to include an
-# explicit call to PKG_PROG_PKG_CONFIG in your configure.ac
-#
-#
-# --------------------------------------------------------------
-# PKG_CHECK_MODULES
-
-
-# Include these first...
-#
-# Copyright (c) 2011, 2017, Oracle and/or its affiliates. All rights reserved.
-# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
-#
-# This code is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License version 2 only, as
-# published by the Free Software Foundation. Oracle designates this
-# particular file as subject to the "Classpath" exception as provided
-# by Oracle in the LICENSE file that accompanied this code.
-#
-# This code is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-# version 2 for more details (a copy is included in the LICENSE file that
-# accompanied this code).
-#
-# You should have received a copy of the GNU General Public License version
-# 2 along with this work; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
-# or visit www.oracle.com if you need additional information or have any
-# questions.
-#
-
-# Create a function/macro that takes a series of named arguments. The call is
-# similar to AC_DEFUN, but the setup of the function looks like this:
-# BASIC_DEFUN_NAMED([MYFUNC], [FOO *BAR], [$@], [
-# ... do something
-# AC_MSG_NOTICE([Value of BAR is ARG_BAR])
-# ])
-# A star (*) in front of a named argument means that it is required and it's
-# presence will be verified. To pass e.g. the first value as a normal indexed
-# argument, use [m4_shift($@)] as the third argument instead of [$@]. These
-# arguments are referenced in the function by their name prefixed by ARG_, e.g.
-# "ARG_FOO".
-#
-# The generated function can be called like this:
-# MYFUNC(FOO: [foo-val],
-# BAR: [
-# $ECHO hello world
-# ])
-# Note that the argument value must start on the same line as the argument name.
-#
-# Argument 1: Name of the function to define
-# Argument 2: List of legal named arguments, with a * prefix for required arguments
-# Argument 3: Argument array to treat as named, typically $@
-# Argument 4: The main function body
-
-
-# Test if $1 is a valid argument to $3 (often is $JAVA passed as $3)
-# If so, then append $1 to $2 \
-# Also set JVM_ARG_OK to true/false depending on outcome.
-
-
-# Appends a string to a path variable, only adding the : when needed.
-
-
-# Prepends a string to a path variable, only adding the : when needed.
-
-
-# This will make sure the given variable points to a full and proper
-# path. This means:
-# 1) There will be no spaces in the path. On unix platforms,
-# spaces in the path will result in an error. On Windows,
-# the path will be rewritten using short-style to be space-free.
-# 2) The path will be absolute, and it will be in unix-style (on
-# cygwin).
-# $1: The name of the variable to fix
-
-
-# This will make sure the given variable points to a executable
-# with a full and proper path. This means:
-# 1) There will be no spaces in the path. On unix platforms,
-# spaces in the path will result in an error. On Windows,
-# the path will be rewritten using short-style to be space-free.
-# 2) The path will be absolute, and it will be in unix-style (on
-# cygwin).
-# Any arguments given to the executable is preserved.
-# If the input variable does not have a directory specification, then
-# it need to be in the PATH.
-# $1: The name of the variable to fix
-
-
-
-
-# Register a --with argument but mark it as deprecated
-# $1: The name of the with argument to deprecate, not including --with-
-
-
-# Register a --enable argument but mark it as deprecated
-# $1: The name of the with argument to deprecate, not including --enable-
-# $2: The name of the argument to deprecate, in shell variable style (i.e. with _ instead of -)
-# $3: Messages to user.
-
-
-
-
-# Test that variable $1 denoting a program is not empty. If empty, exit with an error.
-# $1: variable to check
-
-
-# Check that there are no unprocessed overridden variables left.
-# If so, they are an incorrect argument and we will exit with an error.
-
-
-# Setup a tool for the given variable. If correctly specified by the user,
-# use that value, otherwise search for the tool using the supplied code snippet.
-# $1: variable to set
-# $2: code snippet to call to look for the tool
-# $3: code snippet to call if variable was used to find tool
-
-
-# Call BASIC_SETUP_TOOL with AC_PATH_PROGS to locate the tool
-# $1: variable to set
-# $2: executable name (or list of names) to look for
-# $3: [path]
-
-
-# Call BASIC_SETUP_TOOL with AC_CHECK_TOOLS to locate the tool
-# $1: variable to set
-# $2: executable name (or list of names) to look for
-
-
-# Like BASIC_PATH_PROGS but fails if no tool was found.
-# $1: variable to set
-# $2: executable name (or list of names) to look for
-# $3: [path]
-
-
-# Like BASIC_SETUP_TOOL but fails if no tool was found.
-# $1: variable to set
-# $2: autoconf macro to call to look for the special tool
-
-
-# Setup the most fundamental tools that relies on not much else to set up,
-# but is used by much of the early bootstrap code.
-
-
-# Setup basic configuration paths, and platform-specific stuff related to PATHs.
-
-
-# Evaluates platform specific overrides for devkit variables.
-# $1: Name of variable
-
-
-
-
-
-
-#%%% Simple tools %%%
-
-# Check if we have found a usable version of make
-# $1: the path to a potential make binary (or empty)
-# $2: the description on how we found this
-
-
-
-
-# Goes looking for a usable version of GNU make.
-
-
-
-
-
-
-
-
-
-
-# Check if build directory is on local disk. If not possible to determine,
-# we prefer to claim it's local.
-# Argument 1: directory to test
-# Argument 2: what to do if it is on local disk
-# Argument 3: what to do otherwise (remote disk or failure)
-
-
-# Check that source files have basic read permissions set. This might
-# not be the case in cygwin in certain conditions.
-
-
-
-
-# Check for support for specific options in bash
-
-
-################################################################################
-#
-# Default make target
-#
-
-
-# Code to run after AC_OUTPUT
-
-
-#
-# Copyright (c) 2011, 2016, Oracle and/or its affiliates. All rights reserved.
-# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
-#
-# This code is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License version 2 only, as
-# published by the Free Software Foundation. Oracle designates this
-# particular file as subject to the "Classpath" exception as provided
-# by Oracle in the LICENSE file that accompanied this code.
-#
-# This code is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-# version 2 for more details (a copy is included in the LICENSE file that
-# accompanied this code).
-#
-# You should have received a copy of the GNU General Public License version
-# 2 along with this work; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
-# or visit www.oracle.com if you need additional information or have any
-# questions.
-#
-
-
-
-
-
-# Helper function which possibly converts a path using DOS-style short mode.
-# If so, the updated path is stored in $new_path.
-# $1: The path to check
-
-
-# Helper function which possibly converts a path using DOS-style short mode.
-# If so, the updated path is stored in $new_path.
-# $1: The path to check
-
-
-# FIXME: The BASIC_FIXUP_*_CYGWIN/MSYS is most likely too convoluted
-# and could probably be heavily simplified. However, all changes in this
-# area tend to need lot of testing in different scenarios, and in lack of
-# proper unit testing, cleaning this up has not been deemed worth the effort
-# at the moment.
-
-
-
-
-
-
-
-
-
-# Setup basic configuration paths, and platform-specific stuff related to PATHs.
-
-
-
-
-# ... then the rest
-#
-# Copyright (c) 2011, 2017, Oracle and/or its affiliates. All rights reserved.
-# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
-#
-# This code is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License version 2 only, as
-# published by the Free Software Foundation. Oracle designates this
-# particular file as subject to the "Classpath" exception as provided
-# by Oracle in the LICENSE file that accompanied this code.
-#
-# This code is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-# version 2 for more details (a copy is included in the LICENSE file that
-# accompanied this code).
-#
-# You should have received a copy of the GNU General Public License version
-# 2 along with this work; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
-# or visit www.oracle.com if you need additional information or have any
-# questions.
-#
-
-########################################################################
-# This file handles detection of the Boot JDK. The Boot JDK detection
-# process has been developed as a response to solve a complex real-world
-# problem. Initially, it was simple, but it has grown as platform after
-# platform, idiosyncracy after idiosyncracy has been supported.
-#
-# The basic idea is this:
-# 1) You need an acceptable *) JDK to use as a Boot JDK
-# 2) There are several ways to locate a JDK, that are mostly platform
-# dependent **)
-# 3) You can have multiple JDKs installed
-# 4) If possible, configure should try to dig out an acceptable JDK
-# automatically, without having to resort to command-line options
-#
-# *) acceptable means e.g. JDK7 for building JDK8, a complete JDK (with
-# javac) and not a JRE, etc.
-#
-# **) On Windows we typically use a well-known path.
-# On MacOSX we typically use the tool java_home.
-# On Linux we typically find javac in the $PATH, and then follow a
-# chain of symlinks that often ends up in a real JDK.
-#
-# This leads to the code where we check in different ways to locate a
-# JDK, and if one is found, check if it is acceptable. If not, we print
-# our reasons for rejecting it (useful when debugging non-working
-# configure situations) and continue checking the next one.
-########################################################################
-
-# Execute the check given as argument, and verify the result
-# If the Boot JDK was previously found, do nothing
-# $1 A command line (typically autoconf macro) to execute
-
-
-# Test: Is bootjdk explicitly set by command line arguments?
-
-
-# Test: Is $JAVA_HOME set?
-
-
-# Test: Is there a java or javac in the PATH, which is a symlink to the JDK?
-
-
-# Test: Is there a /usr/libexec/java_home? (Typically on MacOSX)
-# $1: Argument to the java_home binary (optional)
-
-
-# Test: On MacOS X, can we find a boot jdk using /usr/libexec/java_home?
-
-
-# Look for a jdk in the given path. If there are multiple, try to select the newest.
-# If found, set BOOT_JDK and BOOT_JDK_FOUND.
-# $1 = Path to directory containing jdk installations.
-# $2 = String to append to the found JDK directory to get the proper JDK home
-
-
-# Call BOOTJDK_FIND_BEST_JDK_IN_DIRECTORY, but use the given
-# environmental variable as base for where to look.
-# $1 Name of an environmal variable, assumed to point to the Program Files directory.
-
-
-# Test: Is there a JDK installed in default, well-known locations?
-
-
-# Check that a command-line tool in the Boot JDK is correct
-# $1 = name of variable to assign
-# $2 = name of binary
-
-
-###############################################################################
-#
-# We need a Boot JDK to bootstrap the build.
-#
-
-
-
-
-
-# BUILD_JDK: the location of the latest JDK that can run
-# on the host system and supports the target class file version
-# generated in this JDK build. This variable should only be
-# used after the launchers are built.
-#
-
-# Execute the check given as argument, and verify the result.
-# If the JDK was previously found, do nothing.
-# $1 A command line (typically autoconf macro) to execute
-
-
-# By default the BUILD_JDK is the JDK_OUTPUTDIR. If the target architecture
-# is different than the host system doing the build (e.g. cross-compilation),
-# a special BUILD_JDK is built as part of the build process. An external
-# prebuilt BUILD_JDK can also be supplied.
-
-
-#
-# Copyright (c) 2011, 2016, Oracle and/or its affiliates. All rights reserved.
-# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
-#
-# This code is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License version 2 only, as
-# published by the Free Software Foundation. Oracle designates this
-# particular file as subject to the "Classpath" exception as provided
-# by Oracle in the LICENSE file that accompanied this code.
-#
-# This code is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-# version 2 for more details (a copy is included in the LICENSE file that
-# accompanied this code).
-#
-# You should have received a copy of the GNU General Public License version
-# 2 along with this work; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
-# or visit www.oracle.com if you need additional information or have any
-# questions.
-#
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-################################################################################
-#
-# Runs icecc-create-env once and prints the error if it fails
-#
-# $1: arguments to icecc-create-env
-# $2: log file
-#
-
-
-################################################################################
-#
-# Optionally enable distributed compilation of native code using icecc/icecream
-#
-
-
-
-
-
-
-
-#
-# Copyright (c) 2011, 2017, Oracle and/or its affiliates. All rights reserved.
-# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
-#
-# This code is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License version 2 only, as
-# published by the Free Software Foundation. Oracle designates this
-# particular file as subject to the "Classpath" exception as provided
-# by Oracle in the LICENSE file that accompanied this code.
-#
-# This code is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-# version 2 for more details (a copy is included in the LICENSE file that
-# accompanied this code).
-#
-# You should have received a copy of the GNU General Public License version
-# 2 along with this work; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
-# or visit www.oracle.com if you need additional information or have any
-# questions.
-#
-
-################################################################################
-#
-# Setup ABI profile (for arm)
-#
-
-
-# Reset the global CFLAGS/LDFLAGS variables and initialize them with the
-# corresponding configure arguments instead
-
-
-# Setup the sysroot flags and add them to global CFLAGS and LDFLAGS so
-# that configure can use them while detecting compilers.
-# TOOLCHAIN_TYPE is available here.
-# Param 1 - Optional prefix to all variables. (e.g BUILD_)
-
-
-
-
-
-
-# Documentation on common flags used for solstudio in HIGHEST.
-#
-# WARNING: Use of OPTIMIZATION_LEVEL=HIGHEST in your Makefile needs to be
-# done with care, there are some assumptions below that need to
-# be understood about the use of pointers, and IEEE behavior.
-#
-# -fns: Use non-standard floating point mode (not IEEE 754)
-# -fsimple: Do some simplification of floating point arithmetic (not IEEE 754)
-# -fsingle: Use single precision floating point with 'float'
-# -xalias_level=basic: Assume memory references via basic pointer types do not alias
-# (Source with excessing pointer casting and data access with mixed
-# pointer types are not recommended)
-# -xbuiltin=%all: Use intrinsic or inline versions for math/std functions
-# (If you expect perfect errno behavior, do not use this)
-# -xdepend: Loop data dependency optimizations (need -xO3 or higher)
-# -xrestrict: Pointer parameters to functions do not overlap
-# (Similar to -xalias_level=basic usage, but less obvious sometimes.
-# If you pass in multiple pointers to the same data, do not use this)
-# -xlibmil: Inline some library routines
-# (If you expect perfect errno behavior, do not use this)
-# -xlibmopt: Use optimized math routines (CURRENTLY DISABLED)
-# (If you expect perfect errno behavior, do not use this)
-# Can cause undefined external on Solaris 8 X86 on __sincos, removing for now
-
- # FIXME: this will never happen since sparc != sparcv9, ie 32 bit, which we don't build anymore.
- # Bug?
- #if test "x$OPENJDK_TARGET_CPU" = xsparc; then
- # CFLAGS_JDK="${CFLAGS_JDK} -xmemalign=4s"
- # CXXFLAGS_JDK="${CXXFLAGS_JDK} -xmemalign=4s"
- #fi
-
-
-
-
-
-
-################################################################################
-# $1 - Either BUILD or TARGET to pick the correct OS/CPU variables to check
-# conditionals against.
-# $2 - Optional prefix for each variable defined.
-
-
-# FLAGS_C_COMPILER_CHECK_ARGUMENTS(ARGUMENT: [ARGUMENT], IF_TRUE: [RUN-IF-TRUE],
-# IF_FALSE: [RUN-IF-FALSE])
-# ------------------------------------------------------------
-# Check that the C compiler supports an argument
-
-
-
-
-# FLAGS_CXX_COMPILER_CHECK_ARGUMENTS(ARGUMENT: [ARGUMENT], IF_TRUE: [RUN-IF-TRUE],
-# IF_FALSE: [RUN-IF-FALSE])
-# ------------------------------------------------------------
-# Check that the C++ compiler supports an argument
-
-
-
-
-# FLAGS_COMPILER_CHECK_ARGUMENTS(ARGUMENT: [ARGUMENT], IF_TRUE: [RUN-IF-TRUE],
-# IF_FALSE: [RUN-IF-FALSE])
-# ------------------------------------------------------------
-# Check that the C and C++ compilers support an argument
-
-
-
-
-# FLAGS_LINKER_CHECK_ARGUMENTS(ARGUMENT: [ARGUMENT], IF_TRUE: [RUN-IF-TRUE],
-# IF_FALSE: [RUN-IF-FALSE])
-# ------------------------------------------------------------
-# Check that the linker support an argument
-
-
-
-
-
-
-# FLAGS_SETUP_GCC6_COMPILER_FLAGS([PREFIX])
-# Arguments:
-# $1 - Optional prefix for each variable defined.
-
-
-#
-# Copyright (c) 2011, 2017, Oracle and/or its affiliates. All rights reserved.
-# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
-#
-# This code is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License version 2 only, as
-# published by the Free Software Foundation. Oracle designates this
-# particular file as subject to the "Classpath" exception as provided
-# by Oracle in the LICENSE file that accompanied this code.
-#
-# This code is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-# version 2 for more details (a copy is included in the LICENSE file that
-# accompanied this code).
-#
-# You should have received a copy of the GNU General Public License version
-# 2 along with this work; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
-# or visit www.oracle.com if you need additional information or have any
-# questions.
-#
-
-
-
-
-
-cygwin_help() {
- case $1 in
- unzip)
- PKGHANDLER_COMMAND="( cd && cmd /c setup -q -P unzip )"
- HELP_MSG="You might be able to fix this by running '$PKGHANDLER_COMMAND'."
- ;;
- zip)
- PKGHANDLER_COMMAND="( cd && cmd /c setup -q -P zip )"
- HELP_MSG="You might be able to fix this by running '$PKGHANDLER_COMMAND'."
- ;;
- make)
- PKGHANDLER_COMMAND="( cd && cmd /c setup -q -P make )"
- HELP_MSG="You might be able to fix this by running '$PKGHANDLER_COMMAND'."
- ;;
- freetype)
- HELP_MSG="
-The freetype library can now be build during the configure process.
-Download the freetype sources and unpack them into an arbitrary directory:
-
-wget http://download.savannah.gnu.org/releases/freetype/freetype-2.5.3.tar.gz
-tar -xzf freetype-2.5.3.tar.gz
-
-Then run configure with '--with-freetype-src='. This will
-automatically build the freetype library into '/lib64' for 64-bit
-builds or into '/lib32' for 32-bit builds.
-Afterwards you can always use '--with-freetype-include=/include'
-and '--with-freetype-lib=/lib32|64' for other builds.
-
-Alternatively you can unpack the sources like this to use the default directory:
-
-tar --one-top-level=$HOME/freetype --strip-components=1 -xzf freetype-2.5.3.tar.gz"
- ;;
- esac
-}
-
-msys_help() {
- PKGHANDLER_COMMAND=""
-}
-
-apt_help() {
- case $1 in
- reduced)
- PKGHANDLER_COMMAND="sudo apt-get install gcc-multilib g++-multilib" ;;
- devkit)
- PKGHANDLER_COMMAND="sudo apt-get install build-essential" ;;
- openjdk)
- PKGHANDLER_COMMAND="sudo apt-get install openjdk-8-jdk" ;;
- alsa)
- PKGHANDLER_COMMAND="sudo apt-get install libasound2-dev" ;;
- cups)
- PKGHANDLER_COMMAND="sudo apt-get install libcups2-dev" ;;
- fontconfig)
- PKGHANDLER_COMMAND="sudo apt-get install libfontconfig1-dev" ;;
- freetype)
- PKGHANDLER_COMMAND="sudo apt-get install libfreetype6-dev" ;;
- ffi)
- PKGHANDLER_COMMAND="sudo apt-get install libffi-dev" ;;
- x11)
- PKGHANDLER_COMMAND="sudo apt-get install libx11-dev libxext-dev libxrender-dev libxtst-dev libxt-dev" ;;
- ccache)
- PKGHANDLER_COMMAND="sudo apt-get install ccache" ;;
- dtrace)
- PKGHANDLER_COMMAND="sudo apt-get install systemtap-sdt-dev" ;;
- esac
-}
-
-yum_help() {
- case $1 in
- devkit)
- PKGHANDLER_COMMAND="sudo yum groupinstall \"Development Tools\"" ;;
- openjdk)
- PKGHANDLER_COMMAND="sudo yum install java-1.8.0-openjdk-devel" ;;
- alsa)
- PKGHANDLER_COMMAND="sudo yum install alsa-lib-devel" ;;
- cups)
- PKGHANDLER_COMMAND="sudo yum install cups-devel" ;;
- fontconfig)
- PKGHANDLER_COMMAND="sudo yum install fontconfig-devel" ;;
- freetype)
- PKGHANDLER_COMMAND="sudo yum install freetype-devel" ;;
- x11)
- PKGHANDLER_COMMAND="sudo yum install libXtst-devel libXt-devel libXrender-devel libXi-devel" ;;
- ccache)
- PKGHANDLER_COMMAND="sudo yum install ccache" ;;
- esac
-}
-
-brew_help() {
- case $1 in
- openjdk)
- PKGHANDLER_COMMAND="brew cask install java" ;;
- freetype)
- PKGHANDLER_COMMAND="brew install freetype" ;;
- ccache)
- PKGHANDLER_COMMAND="brew install ccache" ;;
- esac
-}
-
-port_help() {
- PKGHANDLER_COMMAND=""
-}
-
-pkgutil_help() {
- PKGHANDLER_COMMAND=""
-}
-
-pkgadd_help() {
- PKGHANDLER_COMMAND=""
-}
-
-# This function will check if we're called from the "configure" wrapper while
-# printing --help. If so, we will print out additional information that can
-# only be extracted within the autoconf script, and then exit. This must be
-# called at the very beginning in configure.ac.
-
-
-
-
-
-
-#
-# Copyright (c) 2011, 2017, Oracle and/or its affiliates. All rights reserved.
-# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
-#
-# This code is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License version 2 only, as
-# published by the Free Software Foundation. Oracle designates this
-# particular file as subject to the "Classpath" exception as provided
-# by Oracle in the LICENSE file that accompanied this code.
-#
-# This code is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-# version 2 for more details (a copy is included in the LICENSE file that
-# accompanied this code).
-#
-# You should have received a copy of the GNU General Public License version
-# 2 along with this work; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
-# or visit www.oracle.com if you need additional information or have any
-# questions.
-#
-
-# All valid JVM features, regardless of platform
-VALID_JVM_FEATURES="compiler1 compiler2 zero minimal dtrace jvmti jvmci \
- graal vm-structs jni-check services management all-gcs nmt cds \
- static-build link-time-opt aot"
-
-# All valid JVM variants
-VALID_JVM_VARIANTS="server client minimal core zero custom"
-
-###############################################################################
-# Check if the specified JVM variant should be built. To be used in shell if
-# constructs, like this:
-# if HOTSPOT_CHECK_JVM_VARIANT(server); then
-#
-# Only valid to use after HOTSPOT_SETUP_JVM_VARIANTS has setup variants.
-
-# Definition kept in one line to allow inlining in if statements.
-# Additional [] needed to keep m4 from mangling shell constructs.
-
-
-###############################################################################
-# Check if the specified JVM features are explicitly enabled. To be used in
-# shell if constructs, like this:
-# if HOTSPOT_CHECK_JVM_FEATURE(jvmti); then
-#
-# Only valid to use after HOTSPOT_SETUP_JVM_FEATURES has setup features.
-
-# Definition kept in one line to allow inlining in if statements.
-# Additional [] needed to keep m4 from mangling shell constructs.
-
-
-###############################################################################
-# Check which variants of the JVM that we want to build. Available variants are:
-# server: normal interpreter, and a tiered C1/C2 compiler
-# client: normal interpreter, and C1 (no C2 compiler)
-# minimal: reduced form of client with optional features stripped out
-# core: normal interpreter only, no compiler
-# zero: C++ based interpreter only, no compiler
-# custom: baseline JVM with no default features
-#
-
-
-###############################################################################
-# Check if dtrace should be enabled and has all prerequisites present.
-#
-
-
-################################################################################
-# Check if AOT should be enabled
-#
-
-
-################################################################################
-# Allow to disable CDS
-#
-
-
-###############################################################################
-# Set up all JVM features for each JVM variant.
-#
-
-
-###############################################################################
-# Validate JVM features once all setup is complete, including custom setup.
-#
-
-
-################################################################################
-#
-# Specify which sources will be used to build the 64-bit ARM port
-#
-# --with-cpu-port=arm64 will use hotspot/src/cpu/arm
-# --with-cpu-port=aarch64 will use hotspot/src/cpu/aarch64
-#
-
-
-
-################################################################################
-# Check if gtest should be built
-#
-
-
-#
-# Copyright (c) 2011, 2017, Oracle and/or its affiliates. All rights reserved.
-# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
-#
-# This code is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License version 2 only, as
-# published by the Free Software Foundation. Oracle designates this
-# particular file as subject to the "Classpath" exception as provided
-# by Oracle in the LICENSE file that accompanied this code.
-#
-# This code is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-# version 2 for more details (a copy is included in the LICENSE file that
-# accompanied this code).
-#
-# You should have received a copy of the GNU General Public License version
-# 2 along with this work; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
-# or visit www.oracle.com if you need additional information or have any
-# questions.
-#
-
-###############################################################################
-# Check which variant of the JDK that we want to build.
-# Currently we have:
-# normal: standard edition
-# but the custom make system may add other variants
-#
-# Effectively the JDK variant gives a name to a specific set of
-# modules to compile into the JDK.
-
-
-###############################################################################
-# Set the debug level
-# release: no debug information, all optimizations, no asserts.
-# optimized: no debug information, all optimizations, no asserts, HotSpot target is 'optimized'.
-# fastdebug: debug information (-g), all optimizations, all asserts
-# slowdebug: debug information (-g), no optimizations, all asserts
-
-
-###############################################################################
-#
-# Should we build only OpenJDK even if closed sources are present?
-#
-
-
-
-
-###############################################################################
-#
-# Enable or disable the elliptic curve crypto implementation
-#
-
-
-
-
-################################################################################
-#
-# Gcov coverage data for hotspot
-#
-
-
-###############################################################################
-#
-# AddressSanitizer
-#
-
-
-################################################################################
-#
-# Static build support. When enabled will generate static
-# libraries instead of shared libraries for all JDK libs.
-#
-
-
-################################################################################
-#
-# jlink options.
-# We always keep packaged modules in JDK image.
-#
-
-
-################################################################################
-#
-# Check if building of the jtreg failure handler should be enabled.
-#
-
-
-################################################################################
-#
-# Enable or disable generation of the classlist at build time
-#
-
-
-#
-# Copyright (c) 2015, 2017, Oracle and/or its affiliates. All rights reserved.
-# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
-#
-# This code is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License version 2 only, as
-# published by the Free Software Foundation. Oracle designates this
-# particular file as subject to the "Classpath" exception as provided
-# by Oracle in the LICENSE file that accompanied this code.
-#
-# This code is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-# version 2 for more details (a copy is included in the LICENSE file that
-# accompanied this code).
-#
-# You should have received a copy of the GNU General Public License version
-# 2 along with this work; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
-# or visit www.oracle.com if you need additional information or have any
-# questions.
-#
-
-###############################################################################
-#
-# Setup version numbers
-#
-
-# Verify that a given string represents a valid version number, and assign it
-# to a variable.
-
-# Argument 1: the variable to assign to
-# Argument 2: the value given by the user
-
-
-
-
-#
-# Copyright (c) 2011, 2017, Oracle and/or its affiliates. All rights reserved.
-# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
-#
-# This code is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License version 2 only, as
-# published by the Free Software Foundation. Oracle designates this
-# particular file as subject to the "Classpath" exception as provided
-# by Oracle in the LICENSE file that accompanied this code.
-#
-# This code is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-# version 2 for more details (a copy is included in the LICENSE file that
-# accompanied this code).
-#
-# You should have received a copy of the GNU General Public License version
-# 2 along with this work; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
-# or visit www.oracle.com if you need additional information or have any
-# questions.
-#
-
-# Major library component reside in separate files.
-#
-# Copyright (c) 2011, 2015, Oracle and/or its affiliates. All rights reserved.
-# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
-#
-# This code is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License version 2 only, as
-# published by the Free Software Foundation. Oracle designates this
-# particular file as subject to the "Classpath" exception as provided
-# by Oracle in the LICENSE file that accompanied this code.
-#
-# This code is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-# version 2 for more details (a copy is included in the LICENSE file that
-# accompanied this code).
-#
-# You should have received a copy of the GNU General Public License version
-# 2 along with this work; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
-# or visit www.oracle.com if you need additional information or have any
-# questions.
-#
-
-################################################################################
-# Setup alsa (Advanced Linux Sound Architecture)
-################################################################################
-
-
-#
-# Copyright (c) 2011, 2017, Oracle and/or its affiliates. All rights reserved.
-# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
-#
-# This code is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License version 2 only, as
-# published by the Free Software Foundation. Oracle designates this
-# particular file as subject to the "Classpath" exception as provided
-# by Oracle in the LICENSE file that accompanied this code.
-#
-# This code is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-# version 2 for more details (a copy is included in the LICENSE file that
-# accompanied this code).
-#
-# You should have received a copy of the GNU General Public License version
-# 2 along with this work; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
-# or visit www.oracle.com if you need additional information or have any
-# questions.
-#
-
-################################################################################
-# Setup bundled libraries.
-#
-# For libjpeg, giflib, libpng, lcms2 and zlib, the source is present in the
-# OpenJDK repository. Default is to use these libraries as bundled, but they
-# might be replaced by en external version by the user.
-################################################################################
-
-
-################################################################################
-# Setup libjpeg
-################################################################################
-
-
-################################################################################
-# Setup giflib
-################################################################################
-
-
-################################################################################
-# Setup libpng
-################################################################################
-
-
-################################################################################
-# Setup zlib
-################################################################################
-
-
-################################################################################
-# Setup lcms (Little CMS)
-################################################################################
-
-
-#
-# Copyright (c) 2011, 2016, Oracle and/or its affiliates. All rights reserved.
-# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
-#
-# This code is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License version 2 only, as
-# published by the Free Software Foundation. Oracle designates this
-# particular file as subject to the "Classpath" exception as provided
-# by Oracle in the LICENSE file that accompanied this code.
-#
-# This code is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-# version 2 for more details (a copy is included in the LICENSE file that
-# accompanied this code).
-#
-# You should have received a copy of the GNU General Public License version
-# 2 along with this work; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
-# or visit www.oracle.com if you need additional information or have any
-# questions.
-#
-
-################################################################################
-# Setup cups (Common Unix Printing System)
-################################################################################
-
-
-#
-# Copyright (c) 2015, Oracle and/or its affiliates. All rights reserved.
-# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
-#
-# This code is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License version 2 only, as
-# published by the Free Software Foundation. Oracle designates this
-# particular file as subject to the "Classpath" exception as provided
-# by Oracle in the LICENSE file that accompanied this code.
-#
-# This code is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-# version 2 for more details (a copy is included in the LICENSE file that
-# accompanied this code).
-#
-# You should have received a copy of the GNU General Public License version
-# 2 along with this work; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
-# or visit www.oracle.com if you need additional information or have any
-# questions.
-#
-
-################################################################################
-# Setup libffi (Foreign Function Interface)
-################################################################################
-
-
-#
-# Copyright (c) 2011, 2017, Oracle and/or its affiliates. All rights reserved.
-# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
-#
-# This code is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License version 2 only, as
-# published by the Free Software Foundation. Oracle designates this
-# particular file as subject to the "Classpath" exception as provided
-# by Oracle in the LICENSE file that accompanied this code.
-#
-# This code is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-# version 2 for more details (a copy is included in the LICENSE file that
-# accompanied this code).
-#
-# You should have received a copy of the GNU General Public License version
-# 2 along with this work; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
-# or visit www.oracle.com if you need additional information or have any
-# questions.
-#
-
-################################################################################
-# Build the freetype lib from source
-################################################################################
-
-
-################################################################################
-# Check if a potential freeype library match is correct and usable
-################################################################################
-
-
-################################################################################
-# Setup freetype (The FreeType2 font rendering library)
-################################################################################
-
-
-#
-# Copyright (c) 2011, 2016, Oracle and/or its affiliates. All rights reserved.
-# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
-#
-# This code is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License version 2 only, as
-# published by the Free Software Foundation. Oracle designates this
-# particular file as subject to the "Classpath" exception as provided
-# by Oracle in the LICENSE file that accompanied this code.
-#
-# This code is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-# version 2 for more details (a copy is included in the LICENSE file that
-# accompanied this code).
-#
-# You should have received a copy of the GNU General Public License version
-# 2 along with this work; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
-# or visit www.oracle.com if you need additional information or have any
-# questions.
-#
-
-################################################################################
-# Setup the standard C/C++ runtime libraries.
-#
-# Most importantly, determine if stdc++ should be linked statically or
-# dynamically.
-################################################################################
-
-
-#
-# Copyright (c) 2011, 2015, Oracle and/or its affiliates. All rights reserved.
-# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
-#
-# This code is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License version 2 only, as
-# published by the Free Software Foundation. Oracle designates this
-# particular file as subject to the "Classpath" exception as provided
-# by Oracle in the LICENSE file that accompanied this code.
-#
-# This code is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-# version 2 for more details (a copy is included in the LICENSE file that
-# accompanied this code).
-#
-# You should have received a copy of the GNU General Public License version
-# 2 along with this work; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
-# or visit www.oracle.com if you need additional information or have any
-# questions.
-#
-
-################################################################################
-# Setup X11 Windows system
-################################################################################
-
-
-#
-# Copyright (c) 2017, Oracle and/or its affiliates. All rights reserved.
-# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
-#
-# This code is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License version 2 only, as
-# published by the Free Software Foundation. Oracle designates this
-# particular file as subject to the "Classpath" exception as provided
-# by Oracle in the LICENSE file that accompanied this code.
-#
-# This code is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-# version 2 for more details (a copy is included in the LICENSE file that
-# accompanied this code).
-#
-# You should have received a copy of the GNU General Public License version
-# 2 along with this work; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
-# or visit www.oracle.com if you need additional information or have any
-# questions.
-#
-
-################################################################################
-# Setup fontconfig
-################################################################################
-
-
-
-################################################################################
-# Determine which libraries are needed for this configuration
-################################################################################
-
-
-################################################################################
-# Parse library options, and setup needed libraries
-################################################################################
-
-
-################################################################################
-# Setup various libraries, typically small system libraries
-################################################################################
-
-
-################################################################################
-# libstlport.so.1 is needed for running gtest on Solaris. Find it to
-# redistribute it in the test image.
-################################################################################
-
-
-
-#
-# Copyright (c) 2011, 2017, Oracle and/or its affiliates. All rights reserved.
-# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
-#
-# This code is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License version 2 only, as
-# published by the Free Software Foundation. Oracle designates this
-# particular file as subject to the "Classpath" exception as provided
-# by Oracle in the LICENSE file that accompanied this code.
-#
-# This code is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-# version 2 for more details (a copy is included in the LICENSE file that
-# accompanied this code).
-#
-# You should have received a copy of the GNU General Public License version
-# 2 along with this work; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
-# or visit www.oracle.com if you need additional information or have any
-# questions.
-#
-
-# Support macro for PLATFORM_EXTRACT_TARGET_AND_BUILD.
-# Converts autoconf style CPU name to OpenJDK style, into
-# VAR_CPU, VAR_CPU_ARCH, VAR_CPU_BITS and VAR_CPU_ENDIAN.
-
-
-# Support macro for PLATFORM_EXTRACT_TARGET_AND_BUILD.
-# Converts autoconf style OS name to OpenJDK style, into
-# VAR_OS, VAR_OS_TYPE and VAR_OS_ENV.
-
-
-# Expects $host_os $host_cpu $build_os and $build_cpu
-# and $with_target_bits to have been setup!
-#
-# Translate the standard triplet(quadruplet) definition
-# of the target/build system into OPENJDK_TARGET_OS, OPENJDK_TARGET_CPU,
-# OPENJDK_BUILD_OS, etc.
-
-
-# Check if a reduced build (32-bit on 64-bit platforms) is requested, and modify behaviour
-# accordingly. Must be done after setting up build and target system, but before
-# doing anything else with these values.
-
-
-# Setup the legacy variables, for controlling the old makefiles.
-#
-
-
-# $1 - Either TARGET or BUILD to setup the variables for.
-
-
-
-
-
-
-#%%% Build and target systems %%%
-
-
-
-
-# Support macro for PLATFORM_SETUP_OPENJDK_TARGET_BITS.
-# Add -mX to various FLAGS variables.
-
-
-
-
-
-
-#
-# Copyright (c) 2011, 2017, Oracle and/or its affiliates. All rights reserved.
-# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
-#
-# This code is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License version 2 only, as
-# published by the Free Software Foundation. Oracle designates this
-# particular file as subject to the "Classpath" exception as provided
-# by Oracle in the LICENSE file that accompanied this code.
-#
-# This code is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-# version 2 for more details (a copy is included in the LICENSE file that
-# accompanied this code).
-#
-# You should have received a copy of the GNU General Public License version
-# 2 along with this work; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
-# or visit www.oracle.com if you need additional information or have any
-# questions.
-#
-
-
-
-################################################################################
-# Define a mechanism for importing extra prebuilt modules
-#
-
-
-
-#
-# Copyright (c) 2011, 2017, Oracle and/or its affiliates. All rights reserved.
-# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
-#
-# This code is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License version 2 only, as
-# published by the Free Software Foundation. Oracle designates this
-# particular file as subject to the "Classpath" exception as provided
-# by Oracle in the LICENSE file that accompanied this code.
-#
-# This code is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-# version 2 for more details (a copy is included in the LICENSE file that
-# accompanied this code).
-#
-# You should have received a copy of the GNU General Public License version
-# 2 along with this work; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
-# or visit www.oracle.com if you need additional information or have any
-# questions.
-#
-
-########################################################################
-# This file is responsible for detecting, verifying and setting up the
-# toolchain, i.e. the compiler, linker and related utilities. It will setup
-# proper paths to the binaries, but it will not setup any flags.
-#
-# The binaries used is determined by the toolchain type, which is the family of
-# compilers and related tools that are used.
-########################################################################
-
-
-# All valid toolchains, regardless of platform (used by help.m4)
-VALID_TOOLCHAINS_all="gcc clang solstudio xlc microsoft"
-
-# These toolchains are valid on different platforms
-VALID_TOOLCHAINS_linux="gcc clang"
-VALID_TOOLCHAINS_solaris="solstudio"
-VALID_TOOLCHAINS_macosx="gcc clang"
-VALID_TOOLCHAINS_aix="xlc"
-VALID_TOOLCHAINS_windows="microsoft"
-
-# Toolchain descriptions
-TOOLCHAIN_DESCRIPTION_clang="clang/LLVM"
-TOOLCHAIN_DESCRIPTION_gcc="GNU Compiler Collection"
-TOOLCHAIN_DESCRIPTION_microsoft="Microsoft Visual Studio"
-TOOLCHAIN_DESCRIPTION_solstudio="Oracle Solaris Studio"
-TOOLCHAIN_DESCRIPTION_xlc="IBM XL C/C++"
-
-# Minimum supported versions, empty means unspecified
-TOOLCHAIN_MINIMUM_VERSION_clang="3.2"
-TOOLCHAIN_MINIMUM_VERSION_gcc="4.7"
-TOOLCHAIN_MINIMUM_VERSION_microsoft="16.00.30319.01" # VS2010
-TOOLCHAIN_MINIMUM_VERSION_solstudio="5.13"
-TOOLCHAIN_MINIMUM_VERSION_xlc=""
-
-# Prepare the system so that TOOLCHAIN_CHECK_COMPILER_VERSION can be called.
-# Must have CC_VERSION_NUMBER and CXX_VERSION_NUMBER.
-# $1 - optional variable prefix for compiler and version variables (BUILD_)
-# $2 - optional variable prefix for comparable variable (OPENJDK_BUILD_)
-
-
-# Check if the configured compiler (C and C++) is of a specific version or
-# newer. TOOLCHAIN_PREPARE_FOR_VERSION_COMPARISONS must have been called before.
-#
-# Arguments:
-# VERSION: The version string to check against the found version
-# IF_AT_LEAST: block to run if the compiler is at least this version (>=)
-# IF_OLDER_THAN: block to run if the compiler is older than this version (<)
-# PREFIX: Optional variable prefix for compiler to compare version for (OPENJDK_BUILD_)
-
-
-
-
-# Setup a number of variables describing how native output files are
-# named on this platform/toolchain.
-
-
-# Determine which toolchain type to use, and make sure it is valid for this
-# platform. Setup various information about the selected toolchain.
-
-
-# Before we start detecting the toolchain executables, we might need some
-# special setup, e.g. additional paths etc.
-
-
-# Restore path, etc
-
-
-# Check if a compiler is of the toolchain type we expect, and save the version
-# information from it. If the compiler does not match the expected type,
-# this function will abort using AC_MSG_ERROR. If it matches, the version will
-# be stored in CC_VERSION_NUMBER/CXX_VERSION_NUMBER (as a dotted number), and
-# the full version string in CC_VERSION_STRING/CXX_VERSION_STRING.
-#
-# $1 = compiler to test (CC or CXX)
-# $2 = human readable name of compiler (C or C++)
-
-
-# Try to locate the given C or C++ compiler in the path, or otherwise.
-#
-# $1 = compiler to test (CC or CXX)
-# $2 = human readable name of compiler (C or C++)
-# $3 = compiler name to search for
-
-
-# Detect the core components of the toolchain, i.e. the compilers (CC and CXX),
-# preprocessor (CPP and CXXCPP), the linker (LD), the assembler (AS) and the
-# archiver (AR). Verify that the compilers are correct according to the
-# toolchain type.
-
-
-# Setup additional tools that is considered a part of the toolchain, but not the
-# core part. Many of these are highly platform-specific and do not exist,
-# and/or are not needed on all platforms.
-
-
-# Setup the build tools (i.e, the compiler and linker used to build programs
-# that should be run on the build platform, not the target platform, as a build
-# helper). Since the non-cross-compile case uses the normal, target compilers
-# for this, we can only do this after these have been setup.
-
-
-# Do some additional checks on the detected tools.
-
-
-# Setup the JTReg Regression Test Harness.
-
-
-# Setup the JIB dependency resolver
-
-
-#
-# Copyright (c) 2011, 2012, Oracle and/or its affiliates. All rights reserved.
-# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
-#
-# This code is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License version 2 only, as
-# published by the Free Software Foundation. Oracle designates this
-# particular file as subject to the "Classpath" exception as provided
-# by Oracle in the LICENSE file that accompanied this code.
-#
-# This code is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-# version 2 for more details (a copy is included in the LICENSE file that
-# accompanied this code).
-#
-# You should have received a copy of the GNU General Public License version
-# 2 along with this work; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
-# or visit www.oracle.com if you need additional information or have any
-# questions.
-#
-
-################################################################################
-# The order of these defines the priority by which we try to find them.
-VALID_VS_VERSIONS="2013 2012 2010"
-
-VS_DESCRIPTION_2010="Microsoft Visual Studio 2010"
-VS_VERSION_INTERNAL_2010=100
-VS_MSVCR_2010=msvcr100.dll
-# We don't use msvcp on Visual Studio 2010
-#VS_MSVCP_2010=msvcp100.dll
-VS_ENVVAR_2010="VS100COMNTOOLS"
-VS_VS_INSTALLDIR_2010="Microsoft Visual Studio 10.0"
-VS_SDK_INSTALLDIR_2010="Microsoft SDKs/Windows/v7.1"
-VS_VS_PLATFORM_NAME_2010="v100"
-VS_SDK_PLATFORM_NAME_2010="Windows7.1SDK"
-
-VS_DESCRIPTION_2012="Microsoft Visual Studio 2012"
-VS_VERSION_INTERNAL_2012=110
-VS_MSVCR_2012=msvcr110.dll
-VS_MSVCP_2012=msvcp110.dll
-VS_ENVVAR_2012="VS110COMNTOOLS"
-VS_VS_INSTALLDIR_2012="Microsoft Visual Studio 11.0"
-VS_SDK_INSTALLDIR_2012=
-VS_VS_PLATFORM_NAME_2012="v110"
-VS_SDK_PLATFORM_NAME_2012=
-
-VS_DESCRIPTION_2013="Microsoft Visual Studio 2013"
-VS_VERSION_INTERNAL_2013=120
-VS_MSVCR_2013=msvcr120.dll
-VS_MSVCP_2013=msvcp120.dll
-VS_ENVVAR_2013="VS120COMNTOOLS"
-VS_VS_INSTALLDIR_2013="Microsoft Visual Studio 12.0"
-VS_SDK_INSTALLDIR_2013=
-VS_VS_PLATFORM_NAME_2013="v120"
-VS_SDK_PLATFORM_NAME_2013=
-
-################################################################################
-
-
-
-################################################################################
-
-
-
-################################################################################
-# Finds the bat or cmd file in Visual Studio or the SDK that sets up a proper
-# build environment and assigns it to VS_ENV_CMD
-
-
-################################################################################
-
-
-
-################################################################################
-# Check if the VS env variables were setup prior to running configure.
-# If not, then find vcvarsall.bat and run it automatically, and integrate
-# the set env variables into the spec file.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-# This line needs to be here, verbatim, after all includes and the dummy hook
-# definitions. It is replaced with custom functionality when building
-# custom sources.
-#CUSTOM_AUTOCONF_INCLUDE
-
-# Do not change or remove the following line, it is needed for consistency checks:
-DATE_WHEN_GENERATED=1513805283
-
-###############################################################################
-#
-# Initialization / Boot-strapping
-#
-# The bootstrapping process needs to solve the "chicken or the egg" problem,
-# thus it jumps back and forth, each time gaining something needed later on.
-#
-###############################################################################
-
-# If we are requested to print additional help, do that and then exit.
-# This must be the very first call.
-
- if test "x$CONFIGURE_PRINT_ADDITIONAL_HELP" != x; then
-
- # Print available toolchains
- $PRINTF "The following toolchains are available as arguments to --with-toolchain-type.\n"
- $PRINTF "Which are valid to use depends on the build platform.\n"
- for toolchain in $VALID_TOOLCHAINS_all; do
- # Use indirect variable referencing
- toolchain_var_name=TOOLCHAIN_DESCRIPTION_$toolchain
- TOOLCHAIN_DESCRIPTION=${!toolchain_var_name}
- $PRINTF " %-10s %s\n" $toolchain "$TOOLCHAIN_DESCRIPTION"
- done
- $PRINTF "\n"
-
- # Print available jvm features
- $PRINTF "The following JVM features are available as arguments to --with-jvm-features.\n"
- $PRINTF "Which are valid to use depends on the target platform.\n "
- $PRINTF "%s " $VALID_JVM_FEATURES
- $PRINTF "\n"
-
- # And now exit directly
- exit 0
- fi
-
-
-# Basic initialization that must happen first of all in the normal process.
-
- # Save the original command line. This is passed to us by the wrapper configure script.
-
- # Save the path variable before it gets changed
- ORIGINAL_PATH="$PATH"
-
- DATE_WHEN_CONFIGURED=`LANG=C date`
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: Configuration created at $DATE_WHEN_CONFIGURED." >&5
-$as_echo "$as_me: Configuration created at $DATE_WHEN_CONFIGURED." >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: configure script generated at timestamp $DATE_WHEN_GENERATED." >&5
-$as_echo "$as_me: configure script generated at timestamp $DATE_WHEN_GENERATED." >&6;}
-
-
- # Start with tools that do not need have cross compilation support
- # and can be expected to be found in the default PATH. These tools are
- # used by configure.
-
- # First are all the simple required tools.
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${BASENAME+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in basename
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_BASENAME+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $BASENAME in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_BASENAME="$BASENAME" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_BASENAME="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-BASENAME=$ac_cv_path_BASENAME
-if test -n "$BASENAME"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BASENAME" >&5
-$as_echo "$BASENAME" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$BASENAME" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !BASENAME! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!BASENAME!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xBASENAME" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of BASENAME from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of BASENAME from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in basename
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_BASENAME+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $BASENAME in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_BASENAME="$BASENAME" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_BASENAME="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-BASENAME=$ac_cv_path_BASENAME
-if test -n "$BASENAME"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BASENAME" >&5
-$as_echo "$BASENAME" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$BASENAME" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$BASENAME" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool BASENAME= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool BASENAME= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for BASENAME" >&5
-$as_echo_n "checking for BASENAME... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$BASENAME"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool BASENAME=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool BASENAME=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_BASENAME+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $BASENAME in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_BASENAME="$BASENAME" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_BASENAME="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-BASENAME=$ac_cv_path_BASENAME
-if test -n "$BASENAME"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BASENAME" >&5
-$as_echo "$BASENAME" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$BASENAME" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool BASENAME=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool BASENAME=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for BASENAME" >&5
-$as_echo_n "checking for BASENAME... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool BASENAME=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
- if test "x$BASENAME" = x; then
- as_fn_error $? "Could not find required tool for BASENAME" "$LINENO" 5
- fi
-
-
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${BASH+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in bash
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_BASH+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $BASH in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_BASH="$BASH" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_BASH="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-BASH=$ac_cv_path_BASH
-if test -n "$BASH"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BASH" >&5
-$as_echo "$BASH" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$BASH" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !BASH! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!BASH!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xBASH" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of BASH from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of BASH from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in bash
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_BASH+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $BASH in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_BASH="$BASH" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_BASH="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-BASH=$ac_cv_path_BASH
-if test -n "$BASH"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BASH" >&5
-$as_echo "$BASH" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$BASH" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$BASH" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool BASH= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool BASH= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for BASH" >&5
-$as_echo_n "checking for BASH... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$BASH"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool BASH=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool BASH=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_BASH+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $BASH in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_BASH="$BASH" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_BASH="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-BASH=$ac_cv_path_BASH
-if test -n "$BASH"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BASH" >&5
-$as_echo "$BASH" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$BASH" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool BASH=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool BASH=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for BASH" >&5
-$as_echo_n "checking for BASH... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool BASH=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
- if test "x$BASH" = x; then
- as_fn_error $? "Could not find required tool for BASH" "$LINENO" 5
- fi
-
-
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${CAT+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in cat
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_CAT+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $CAT in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_CAT="$CAT" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_CAT="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-CAT=$ac_cv_path_CAT
-if test -n "$CAT"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CAT" >&5
-$as_echo "$CAT" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$CAT" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !CAT! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!CAT!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xCAT" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of CAT from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of CAT from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in cat
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_CAT+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $CAT in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_CAT="$CAT" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_CAT="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-CAT=$ac_cv_path_CAT
-if test -n "$CAT"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CAT" >&5
-$as_echo "$CAT" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$CAT" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$CAT" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool CAT= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool CAT= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CAT" >&5
-$as_echo_n "checking for CAT... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$CAT"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool CAT=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool CAT=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_CAT+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $CAT in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_CAT="$CAT" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_CAT="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-CAT=$ac_cv_path_CAT
-if test -n "$CAT"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CAT" >&5
-$as_echo "$CAT" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$CAT" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool CAT=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool CAT=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CAT" >&5
-$as_echo_n "checking for CAT... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool CAT=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
- if test "x$CAT" = x; then
- as_fn_error $? "Could not find required tool for CAT" "$LINENO" 5
- fi
-
-
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${CHMOD+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in chmod
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_CHMOD+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $CHMOD in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_CHMOD="$CHMOD" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_CHMOD="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-CHMOD=$ac_cv_path_CHMOD
-if test -n "$CHMOD"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CHMOD" >&5
-$as_echo "$CHMOD" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$CHMOD" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !CHMOD! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!CHMOD!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xCHMOD" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of CHMOD from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of CHMOD from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in chmod
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_CHMOD+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $CHMOD in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_CHMOD="$CHMOD" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_CHMOD="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-CHMOD=$ac_cv_path_CHMOD
-if test -n "$CHMOD"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CHMOD" >&5
-$as_echo "$CHMOD" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$CHMOD" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$CHMOD" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool CHMOD= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool CHMOD= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CHMOD" >&5
-$as_echo_n "checking for CHMOD... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$CHMOD"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool CHMOD=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool CHMOD=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_CHMOD+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $CHMOD in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_CHMOD="$CHMOD" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_CHMOD="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-CHMOD=$ac_cv_path_CHMOD
-if test -n "$CHMOD"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CHMOD" >&5
-$as_echo "$CHMOD" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$CHMOD" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool CHMOD=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool CHMOD=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CHMOD" >&5
-$as_echo_n "checking for CHMOD... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool CHMOD=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
- if test "x$CHMOD" = x; then
- as_fn_error $? "Could not find required tool for CHMOD" "$LINENO" 5
- fi
-
-
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${CMP+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in cmp
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_CMP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $CMP in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_CMP="$CMP" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_CMP="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-CMP=$ac_cv_path_CMP
-if test -n "$CMP"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CMP" >&5
-$as_echo "$CMP" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$CMP" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !CMP! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!CMP!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xCMP" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of CMP from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of CMP from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in cmp
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_CMP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $CMP in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_CMP="$CMP" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_CMP="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-CMP=$ac_cv_path_CMP
-if test -n "$CMP"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CMP" >&5
-$as_echo "$CMP" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$CMP" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$CMP" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool CMP= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool CMP= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CMP" >&5
-$as_echo_n "checking for CMP... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$CMP"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool CMP=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool CMP=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_CMP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $CMP in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_CMP="$CMP" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_CMP="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-CMP=$ac_cv_path_CMP
-if test -n "$CMP"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CMP" >&5
-$as_echo "$CMP" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$CMP" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool CMP=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool CMP=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CMP" >&5
-$as_echo_n "checking for CMP... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool CMP=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
- if test "x$CMP" = x; then
- as_fn_error $? "Could not find required tool for CMP" "$LINENO" 5
- fi
-
-
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${COMM+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in comm
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_COMM+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $COMM in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_COMM="$COMM" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_COMM="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-COMM=$ac_cv_path_COMM
-if test -n "$COMM"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $COMM" >&5
-$as_echo "$COMM" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$COMM" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !COMM! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!COMM!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xCOMM" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of COMM from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of COMM from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in comm
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_COMM+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $COMM in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_COMM="$COMM" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_COMM="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-COMM=$ac_cv_path_COMM
-if test -n "$COMM"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $COMM" >&5
-$as_echo "$COMM" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$COMM" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$COMM" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool COMM= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool COMM= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for COMM" >&5
-$as_echo_n "checking for COMM... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$COMM"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool COMM=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool COMM=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_COMM+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $COMM in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_COMM="$COMM" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_COMM="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-COMM=$ac_cv_path_COMM
-if test -n "$COMM"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $COMM" >&5
-$as_echo "$COMM" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$COMM" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool COMM=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool COMM=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for COMM" >&5
-$as_echo_n "checking for COMM... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool COMM=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
- if test "x$COMM" = x; then
- as_fn_error $? "Could not find required tool for COMM" "$LINENO" 5
- fi
-
-
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${CP+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in cp
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_CP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $CP in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_CP="$CP" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_CP="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-CP=$ac_cv_path_CP
-if test -n "$CP"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CP" >&5
-$as_echo "$CP" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$CP" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !CP! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!CP!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xCP" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of CP from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of CP from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in cp
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_CP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $CP in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_CP="$CP" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_CP="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-CP=$ac_cv_path_CP
-if test -n "$CP"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CP" >&5
-$as_echo "$CP" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$CP" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$CP" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool CP= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool CP= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CP" >&5
-$as_echo_n "checking for CP... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$CP"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool CP=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool CP=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_CP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $CP in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_CP="$CP" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_CP="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-CP=$ac_cv_path_CP
-if test -n "$CP"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CP" >&5
-$as_echo "$CP" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$CP" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool CP=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool CP=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CP" >&5
-$as_echo_n "checking for CP... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool CP=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
- if test "x$CP" = x; then
- as_fn_error $? "Could not find required tool for CP" "$LINENO" 5
- fi
-
-
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${CUT+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in cut
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_CUT+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $CUT in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_CUT="$CUT" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_CUT="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-CUT=$ac_cv_path_CUT
-if test -n "$CUT"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CUT" >&5
-$as_echo "$CUT" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$CUT" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !CUT! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!CUT!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xCUT" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of CUT from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of CUT from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in cut
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_CUT+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $CUT in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_CUT="$CUT" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_CUT="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-CUT=$ac_cv_path_CUT
-if test -n "$CUT"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CUT" >&5
-$as_echo "$CUT" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$CUT" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$CUT" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool CUT= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool CUT= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CUT" >&5
-$as_echo_n "checking for CUT... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$CUT"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool CUT=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool CUT=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_CUT+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $CUT in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_CUT="$CUT" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_CUT="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-CUT=$ac_cv_path_CUT
-if test -n "$CUT"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CUT" >&5
-$as_echo "$CUT" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$CUT" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool CUT=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool CUT=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CUT" >&5
-$as_echo_n "checking for CUT... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool CUT=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
- if test "x$CUT" = x; then
- as_fn_error $? "Could not find required tool for CUT" "$LINENO" 5
- fi
-
-
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${DATE+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in date
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_DATE+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $DATE in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_DATE="$DATE" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_DATE="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-DATE=$ac_cv_path_DATE
-if test -n "$DATE"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DATE" >&5
-$as_echo "$DATE" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$DATE" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !DATE! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!DATE!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xDATE" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of DATE from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of DATE from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in date
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_DATE+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $DATE in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_DATE="$DATE" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_DATE="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-DATE=$ac_cv_path_DATE
-if test -n "$DATE"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DATE" >&5
-$as_echo "$DATE" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$DATE" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$DATE" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool DATE= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool DATE= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for DATE" >&5
-$as_echo_n "checking for DATE... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$DATE"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool DATE=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool DATE=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_DATE+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $DATE in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_DATE="$DATE" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_DATE="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-DATE=$ac_cv_path_DATE
-if test -n "$DATE"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DATE" >&5
-$as_echo "$DATE" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$DATE" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool DATE=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool DATE=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for DATE" >&5
-$as_echo_n "checking for DATE... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool DATE=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
- if test "x$DATE" = x; then
- as_fn_error $? "Could not find required tool for DATE" "$LINENO" 5
- fi
-
-
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${DIFF+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in gdiff diff
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_DIFF+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $DIFF in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_DIFF="$DIFF" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_DIFF="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-DIFF=$ac_cv_path_DIFF
-if test -n "$DIFF"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DIFF" >&5
-$as_echo "$DIFF" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$DIFF" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !DIFF! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!DIFF!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xDIFF" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of DIFF from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of DIFF from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in gdiff diff
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_DIFF+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $DIFF in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_DIFF="$DIFF" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_DIFF="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-DIFF=$ac_cv_path_DIFF
-if test -n "$DIFF"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DIFF" >&5
-$as_echo "$DIFF" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$DIFF" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$DIFF" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool DIFF= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool DIFF= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for DIFF" >&5
-$as_echo_n "checking for DIFF... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$DIFF"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool DIFF=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool DIFF=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_DIFF+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $DIFF in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_DIFF="$DIFF" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_DIFF="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-DIFF=$ac_cv_path_DIFF
-if test -n "$DIFF"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DIFF" >&5
-$as_echo "$DIFF" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$DIFF" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool DIFF=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool DIFF=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for DIFF" >&5
-$as_echo_n "checking for DIFF... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool DIFF=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
- if test "x$DIFF" = x; then
- as_fn_error $? "Could not find required tool for DIFF" "$LINENO" 5
- fi
-
-
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${DIRNAME+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in dirname
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_DIRNAME+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $DIRNAME in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_DIRNAME="$DIRNAME" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_DIRNAME="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-DIRNAME=$ac_cv_path_DIRNAME
-if test -n "$DIRNAME"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DIRNAME" >&5
-$as_echo "$DIRNAME" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$DIRNAME" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !DIRNAME! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!DIRNAME!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xDIRNAME" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of DIRNAME from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of DIRNAME from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in dirname
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_DIRNAME+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $DIRNAME in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_DIRNAME="$DIRNAME" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_DIRNAME="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-DIRNAME=$ac_cv_path_DIRNAME
-if test -n "$DIRNAME"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DIRNAME" >&5
-$as_echo "$DIRNAME" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$DIRNAME" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$DIRNAME" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool DIRNAME= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool DIRNAME= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for DIRNAME" >&5
-$as_echo_n "checking for DIRNAME... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$DIRNAME"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool DIRNAME=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool DIRNAME=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_DIRNAME+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $DIRNAME in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_DIRNAME="$DIRNAME" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_DIRNAME="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-DIRNAME=$ac_cv_path_DIRNAME
-if test -n "$DIRNAME"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DIRNAME" >&5
-$as_echo "$DIRNAME" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$DIRNAME" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool DIRNAME=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool DIRNAME=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for DIRNAME" >&5
-$as_echo_n "checking for DIRNAME... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool DIRNAME=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
- if test "x$DIRNAME" = x; then
- as_fn_error $? "Could not find required tool for DIRNAME" "$LINENO" 5
- fi
-
-
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${ECHO+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in echo
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_ECHO+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $ECHO in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_ECHO="$ECHO" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_ECHO="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-ECHO=$ac_cv_path_ECHO
-if test -n "$ECHO"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ECHO" >&5
-$as_echo "$ECHO" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$ECHO" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !ECHO! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!ECHO!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xECHO" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of ECHO from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of ECHO from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in echo
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_ECHO+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $ECHO in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_ECHO="$ECHO" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_ECHO="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-ECHO=$ac_cv_path_ECHO
-if test -n "$ECHO"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ECHO" >&5
-$as_echo "$ECHO" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$ECHO" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$ECHO" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool ECHO= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool ECHO= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ECHO" >&5
-$as_echo_n "checking for ECHO... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$ECHO"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool ECHO=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool ECHO=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_ECHO+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $ECHO in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_ECHO="$ECHO" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_ECHO="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-ECHO=$ac_cv_path_ECHO
-if test -n "$ECHO"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ECHO" >&5
-$as_echo "$ECHO" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$ECHO" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool ECHO=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool ECHO=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ECHO" >&5
-$as_echo_n "checking for ECHO... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool ECHO=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
- if test "x$ECHO" = x; then
- as_fn_error $? "Could not find required tool for ECHO" "$LINENO" 5
- fi
-
-
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${EXPR+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in expr
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_EXPR+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $EXPR in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_EXPR="$EXPR" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_EXPR="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-EXPR=$ac_cv_path_EXPR
-if test -n "$EXPR"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $EXPR" >&5
-$as_echo "$EXPR" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$EXPR" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !EXPR! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!EXPR!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xEXPR" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of EXPR from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of EXPR from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in expr
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_EXPR+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $EXPR in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_EXPR="$EXPR" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_EXPR="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-EXPR=$ac_cv_path_EXPR
-if test -n "$EXPR"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $EXPR" >&5
-$as_echo "$EXPR" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$EXPR" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$EXPR" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool EXPR= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool EXPR= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for EXPR" >&5
-$as_echo_n "checking for EXPR... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$EXPR"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool EXPR=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool EXPR=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_EXPR+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $EXPR in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_EXPR="$EXPR" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_EXPR="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-EXPR=$ac_cv_path_EXPR
-if test -n "$EXPR"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $EXPR" >&5
-$as_echo "$EXPR" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$EXPR" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool EXPR=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool EXPR=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for EXPR" >&5
-$as_echo_n "checking for EXPR... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool EXPR=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
- if test "x$EXPR" = x; then
- as_fn_error $? "Could not find required tool for EXPR" "$LINENO" 5
- fi
-
-
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${FILE+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in file
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_FILE+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $FILE in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_FILE="$FILE" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_FILE="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-FILE=$ac_cv_path_FILE
-if test -n "$FILE"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $FILE" >&5
-$as_echo "$FILE" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$FILE" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !FILE! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!FILE!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xFILE" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of FILE from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of FILE from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in file
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_FILE+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $FILE in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_FILE="$FILE" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_FILE="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-FILE=$ac_cv_path_FILE
-if test -n "$FILE"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $FILE" >&5
-$as_echo "$FILE" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$FILE" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$FILE" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool FILE= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool FILE= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for FILE" >&5
-$as_echo_n "checking for FILE... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$FILE"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool FILE=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool FILE=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_FILE+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $FILE in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_FILE="$FILE" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_FILE="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-FILE=$ac_cv_path_FILE
-if test -n "$FILE"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $FILE" >&5
-$as_echo "$FILE" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$FILE" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool FILE=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool FILE=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for FILE" >&5
-$as_echo_n "checking for FILE... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool FILE=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
- if test "x$FILE" = x; then
- as_fn_error $? "Could not find required tool for FILE" "$LINENO" 5
- fi
-
-
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${FIND+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in find
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_FIND+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $FIND in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_FIND="$FIND" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_FIND="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-FIND=$ac_cv_path_FIND
-if test -n "$FIND"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $FIND" >&5
-$as_echo "$FIND" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$FIND" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !FIND! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!FIND!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xFIND" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of FIND from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of FIND from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in find
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_FIND+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $FIND in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_FIND="$FIND" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_FIND="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-FIND=$ac_cv_path_FIND
-if test -n "$FIND"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $FIND" >&5
-$as_echo "$FIND" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$FIND" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$FIND" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool FIND= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool FIND= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for FIND" >&5
-$as_echo_n "checking for FIND... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$FIND"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool FIND=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool FIND=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_FIND+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $FIND in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_FIND="$FIND" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_FIND="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-FIND=$ac_cv_path_FIND
-if test -n "$FIND"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $FIND" >&5
-$as_echo "$FIND" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$FIND" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool FIND=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool FIND=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for FIND" >&5
-$as_echo_n "checking for FIND... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool FIND=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
- if test "x$FIND" = x; then
- as_fn_error $? "Could not find required tool for FIND" "$LINENO" 5
- fi
-
-
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${HEAD+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in head
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_HEAD+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $HEAD in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_HEAD="$HEAD" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_HEAD="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-HEAD=$ac_cv_path_HEAD
-if test -n "$HEAD"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $HEAD" >&5
-$as_echo "$HEAD" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$HEAD" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !HEAD! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!HEAD!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xHEAD" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of HEAD from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of HEAD from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in head
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_HEAD+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $HEAD in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_HEAD="$HEAD" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_HEAD="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-HEAD=$ac_cv_path_HEAD
-if test -n "$HEAD"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $HEAD" >&5
-$as_echo "$HEAD" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$HEAD" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$HEAD" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool HEAD= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool HEAD= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for HEAD" >&5
-$as_echo_n "checking for HEAD... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$HEAD"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool HEAD=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool HEAD=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_HEAD+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $HEAD in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_HEAD="$HEAD" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_HEAD="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-HEAD=$ac_cv_path_HEAD
-if test -n "$HEAD"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $HEAD" >&5
-$as_echo "$HEAD" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$HEAD" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool HEAD=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool HEAD=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for HEAD" >&5
-$as_echo_n "checking for HEAD... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool HEAD=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
- if test "x$HEAD" = x; then
- as_fn_error $? "Could not find required tool for HEAD" "$LINENO" 5
- fi
-
-
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${GUNZIP+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in gunzip
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_GUNZIP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $GUNZIP in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_GUNZIP="$GUNZIP" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_GUNZIP="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-GUNZIP=$ac_cv_path_GUNZIP
-if test -n "$GUNZIP"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GUNZIP" >&5
-$as_echo "$GUNZIP" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$GUNZIP" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !GUNZIP! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!GUNZIP!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xGUNZIP" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of GUNZIP from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of GUNZIP from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in gunzip
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_GUNZIP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $GUNZIP in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_GUNZIP="$GUNZIP" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_GUNZIP="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-GUNZIP=$ac_cv_path_GUNZIP
-if test -n "$GUNZIP"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GUNZIP" >&5
-$as_echo "$GUNZIP" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$GUNZIP" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$GUNZIP" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool GUNZIP= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool GUNZIP= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GUNZIP" >&5
-$as_echo_n "checking for GUNZIP... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$GUNZIP"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool GUNZIP=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool GUNZIP=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_GUNZIP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $GUNZIP in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_GUNZIP="$GUNZIP" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_GUNZIP="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-GUNZIP=$ac_cv_path_GUNZIP
-if test -n "$GUNZIP"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GUNZIP" >&5
-$as_echo "$GUNZIP" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$GUNZIP" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool GUNZIP=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool GUNZIP=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GUNZIP" >&5
-$as_echo_n "checking for GUNZIP... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool GUNZIP=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
- if test "x$GUNZIP" = x; then
- as_fn_error $? "Could not find required tool for GUNZIP" "$LINENO" 5
- fi
-
-
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${GZIP+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in pigz gzip
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_GZIP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $GZIP in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_GZIP="$GZIP" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_GZIP="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-GZIP=$ac_cv_path_GZIP
-if test -n "$GZIP"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GZIP" >&5
-$as_echo "$GZIP" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$GZIP" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !GZIP! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!GZIP!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xGZIP" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of GZIP from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of GZIP from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in pigz gzip
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_GZIP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $GZIP in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_GZIP="$GZIP" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_GZIP="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-GZIP=$ac_cv_path_GZIP
-if test -n "$GZIP"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GZIP" >&5
-$as_echo "$GZIP" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$GZIP" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$GZIP" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool GZIP= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool GZIP= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GZIP" >&5
-$as_echo_n "checking for GZIP... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$GZIP"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool GZIP=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool GZIP=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_GZIP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $GZIP in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_GZIP="$GZIP" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_GZIP="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-GZIP=$ac_cv_path_GZIP
-if test -n "$GZIP"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GZIP" >&5
-$as_echo "$GZIP" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$GZIP" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool GZIP=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool GZIP=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GZIP" >&5
-$as_echo_n "checking for GZIP... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool GZIP=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
- if test "x$GZIP" = x; then
- as_fn_error $? "Could not find required tool for GZIP" "$LINENO" 5
- fi
-
-
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${LN+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in ln
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_LN+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $LN in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_LN="$LN" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_LN="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-LN=$ac_cv_path_LN
-if test -n "$LN"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LN" >&5
-$as_echo "$LN" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$LN" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !LN! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!LN!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xLN" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of LN from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of LN from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in ln
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_LN+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $LN in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_LN="$LN" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_LN="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-LN=$ac_cv_path_LN
-if test -n "$LN"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LN" >&5
-$as_echo "$LN" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$LN" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$LN" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool LN= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool LN= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for LN" >&5
-$as_echo_n "checking for LN... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$LN"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool LN=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool LN=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_LN+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $LN in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_LN="$LN" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_LN="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-LN=$ac_cv_path_LN
-if test -n "$LN"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LN" >&5
-$as_echo "$LN" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$LN" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool LN=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool LN=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for LN" >&5
-$as_echo_n "checking for LN... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool LN=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
- if test "x$LN" = x; then
- as_fn_error $? "Could not find required tool for LN" "$LINENO" 5
- fi
-
-
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${LS+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in ls
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_LS+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $LS in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_LS="$LS" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_LS="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-LS=$ac_cv_path_LS
-if test -n "$LS"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LS" >&5
-$as_echo "$LS" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$LS" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !LS! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!LS!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xLS" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of LS from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of LS from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in ls
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_LS+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $LS in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_LS="$LS" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_LS="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-LS=$ac_cv_path_LS
-if test -n "$LS"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LS" >&5
-$as_echo "$LS" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$LS" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$LS" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool LS= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool LS= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for LS" >&5
-$as_echo_n "checking for LS... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$LS"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool LS=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool LS=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_LS+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $LS in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_LS="$LS" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_LS="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-LS=$ac_cv_path_LS
-if test -n "$LS"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LS" >&5
-$as_echo "$LS" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$LS" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool LS=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool LS=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for LS" >&5
-$as_echo_n "checking for LS... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool LS=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
- if test "x$LS" = x; then
- as_fn_error $? "Could not find required tool for LS" "$LINENO" 5
- fi
-
-
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${MKDIR+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in mkdir
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_MKDIR+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $MKDIR in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_MKDIR="$MKDIR" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_MKDIR="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-MKDIR=$ac_cv_path_MKDIR
-if test -n "$MKDIR"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR" >&5
-$as_echo "$MKDIR" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$MKDIR" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !MKDIR! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!MKDIR!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xMKDIR" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of MKDIR from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of MKDIR from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in mkdir
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_MKDIR+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $MKDIR in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_MKDIR="$MKDIR" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_MKDIR="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-MKDIR=$ac_cv_path_MKDIR
-if test -n "$MKDIR"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR" >&5
-$as_echo "$MKDIR" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$MKDIR" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$MKDIR" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool MKDIR= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool MKDIR= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for MKDIR" >&5
-$as_echo_n "checking for MKDIR... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$MKDIR"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool MKDIR=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool MKDIR=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_MKDIR+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $MKDIR in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_MKDIR="$MKDIR" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_MKDIR="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-MKDIR=$ac_cv_path_MKDIR
-if test -n "$MKDIR"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR" >&5
-$as_echo "$MKDIR" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$MKDIR" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool MKDIR=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool MKDIR=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for MKDIR" >&5
-$as_echo_n "checking for MKDIR... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool MKDIR=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
- if test "x$MKDIR" = x; then
- as_fn_error $? "Could not find required tool for MKDIR" "$LINENO" 5
- fi
-
-
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${MKTEMP+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in mktemp
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_MKTEMP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $MKTEMP in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_MKTEMP="$MKTEMP" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_MKTEMP="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-MKTEMP=$ac_cv_path_MKTEMP
-if test -n "$MKTEMP"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKTEMP" >&5
-$as_echo "$MKTEMP" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$MKTEMP" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !MKTEMP! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!MKTEMP!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xMKTEMP" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of MKTEMP from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of MKTEMP from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in mktemp
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_MKTEMP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $MKTEMP in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_MKTEMP="$MKTEMP" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_MKTEMP="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-MKTEMP=$ac_cv_path_MKTEMP
-if test -n "$MKTEMP"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKTEMP" >&5
-$as_echo "$MKTEMP" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$MKTEMP" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$MKTEMP" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool MKTEMP= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool MKTEMP= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for MKTEMP" >&5
-$as_echo_n "checking for MKTEMP... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$MKTEMP"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool MKTEMP=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool MKTEMP=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_MKTEMP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $MKTEMP in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_MKTEMP="$MKTEMP" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_MKTEMP="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-MKTEMP=$ac_cv_path_MKTEMP
-if test -n "$MKTEMP"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKTEMP" >&5
-$as_echo "$MKTEMP" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$MKTEMP" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool MKTEMP=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool MKTEMP=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for MKTEMP" >&5
-$as_echo_n "checking for MKTEMP... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool MKTEMP=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
- if test "x$MKTEMP" = x; then
- as_fn_error $? "Could not find required tool for MKTEMP" "$LINENO" 5
- fi
-
-
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${MV+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in mv
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_MV+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $MV in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_MV="$MV" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_MV="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-MV=$ac_cv_path_MV
-if test -n "$MV"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MV" >&5
-$as_echo "$MV" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$MV" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !MV! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!MV!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xMV" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of MV from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of MV from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in mv
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_MV+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $MV in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_MV="$MV" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_MV="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-MV=$ac_cv_path_MV
-if test -n "$MV"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MV" >&5
-$as_echo "$MV" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$MV" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$MV" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool MV= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool MV= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for MV" >&5
-$as_echo_n "checking for MV... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$MV"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool MV=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool MV=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_MV+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $MV in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_MV="$MV" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_MV="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-MV=$ac_cv_path_MV
-if test -n "$MV"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MV" >&5
-$as_echo "$MV" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$MV" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool MV=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool MV=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for MV" >&5
-$as_echo_n "checking for MV... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool MV=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
- if test "x$MV" = x; then
- as_fn_error $? "Could not find required tool for MV" "$LINENO" 5
- fi
-
-
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${NAWK+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in nawk gawk awk
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_NAWK+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $NAWK in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_NAWK="$NAWK" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_NAWK="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-NAWK=$ac_cv_path_NAWK
-if test -n "$NAWK"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NAWK" >&5
-$as_echo "$NAWK" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$NAWK" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !NAWK! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!NAWK!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xNAWK" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of NAWK from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of NAWK from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in nawk gawk awk
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_NAWK+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $NAWK in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_NAWK="$NAWK" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_NAWK="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-NAWK=$ac_cv_path_NAWK
-if test -n "$NAWK"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NAWK" >&5
-$as_echo "$NAWK" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$NAWK" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$NAWK" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool NAWK= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool NAWK= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for NAWK" >&5
-$as_echo_n "checking for NAWK... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$NAWK"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool NAWK=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool NAWK=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_NAWK+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $NAWK in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_NAWK="$NAWK" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_NAWK="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-NAWK=$ac_cv_path_NAWK
-if test -n "$NAWK"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NAWK" >&5
-$as_echo "$NAWK" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$NAWK" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool NAWK=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool NAWK=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for NAWK" >&5
-$as_echo_n "checking for NAWK... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool NAWK=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
- if test "x$NAWK" = x; then
- as_fn_error $? "Could not find required tool for NAWK" "$LINENO" 5
- fi
-
-
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${PRINTF+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in printf
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_PRINTF+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $PRINTF in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_PRINTF="$PRINTF" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_PRINTF="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-PRINTF=$ac_cv_path_PRINTF
-if test -n "$PRINTF"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PRINTF" >&5
-$as_echo "$PRINTF" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$PRINTF" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !PRINTF! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!PRINTF!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xPRINTF" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of PRINTF from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of PRINTF from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in printf
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_PRINTF+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $PRINTF in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_PRINTF="$PRINTF" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_PRINTF="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-PRINTF=$ac_cv_path_PRINTF
-if test -n "$PRINTF"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PRINTF" >&5
-$as_echo "$PRINTF" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$PRINTF" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$PRINTF" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool PRINTF= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool PRINTF= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for PRINTF" >&5
-$as_echo_n "checking for PRINTF... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$PRINTF"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool PRINTF=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool PRINTF=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_PRINTF+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $PRINTF in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_PRINTF="$PRINTF" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_PRINTF="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-PRINTF=$ac_cv_path_PRINTF
-if test -n "$PRINTF"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PRINTF" >&5
-$as_echo "$PRINTF" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$PRINTF" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool PRINTF=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool PRINTF=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for PRINTF" >&5
-$as_echo_n "checking for PRINTF... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool PRINTF=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
- if test "x$PRINTF" = x; then
- as_fn_error $? "Could not find required tool for PRINTF" "$LINENO" 5
- fi
-
-
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${RM+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in rm
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_RM+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $RM in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_RM="$RM" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_RM="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-RM=$ac_cv_path_RM
-if test -n "$RM"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RM" >&5
-$as_echo "$RM" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$RM" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !RM! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!RM!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xRM" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of RM from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of RM from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in rm
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_RM+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $RM in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_RM="$RM" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_RM="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-RM=$ac_cv_path_RM
-if test -n "$RM"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RM" >&5
-$as_echo "$RM" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$RM" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$RM" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool RM= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool RM= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for RM" >&5
-$as_echo_n "checking for RM... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$RM"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool RM=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool RM=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_RM+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $RM in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_RM="$RM" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_RM="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-RM=$ac_cv_path_RM
-if test -n "$RM"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RM" >&5
-$as_echo "$RM" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$RM" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool RM=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool RM=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for RM" >&5
-$as_echo_n "checking for RM... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool RM=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
- if test "x$RM" = x; then
- as_fn_error $? "Could not find required tool for RM" "$LINENO" 5
- fi
-
-
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${RMDIR+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in rmdir
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_RMDIR+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $RMDIR in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_RMDIR="$RMDIR" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_RMDIR="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-RMDIR=$ac_cv_path_RMDIR
-if test -n "$RMDIR"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RMDIR" >&5
-$as_echo "$RMDIR" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$RMDIR" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !RMDIR! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!RMDIR!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xRMDIR" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of RMDIR from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of RMDIR from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in rmdir
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_RMDIR+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $RMDIR in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_RMDIR="$RMDIR" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_RMDIR="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-RMDIR=$ac_cv_path_RMDIR
-if test -n "$RMDIR"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RMDIR" >&5
-$as_echo "$RMDIR" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$RMDIR" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$RMDIR" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool RMDIR= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool RMDIR= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for RMDIR" >&5
-$as_echo_n "checking for RMDIR... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$RMDIR"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool RMDIR=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool RMDIR=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_RMDIR+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $RMDIR in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_RMDIR="$RMDIR" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_RMDIR="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-RMDIR=$ac_cv_path_RMDIR
-if test -n "$RMDIR"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RMDIR" >&5
-$as_echo "$RMDIR" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$RMDIR" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool RMDIR=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool RMDIR=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for RMDIR" >&5
-$as_echo_n "checking for RMDIR... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool RMDIR=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
- if test "x$RMDIR" = x; then
- as_fn_error $? "Could not find required tool for RMDIR" "$LINENO" 5
- fi
-
-
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${SH+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in sh
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_SH+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $SH in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_SH="$SH" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_SH="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-SH=$ac_cv_path_SH
-if test -n "$SH"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $SH" >&5
-$as_echo "$SH" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$SH" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !SH! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!SH!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xSH" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of SH from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of SH from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in sh
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_SH+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $SH in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_SH="$SH" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_SH="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-SH=$ac_cv_path_SH
-if test -n "$SH"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $SH" >&5
-$as_echo "$SH" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$SH" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$SH" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool SH= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool SH= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for SH" >&5
-$as_echo_n "checking for SH... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$SH"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool SH=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool SH=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_SH+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $SH in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_SH="$SH" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_SH="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-SH=$ac_cv_path_SH
-if test -n "$SH"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $SH" >&5
-$as_echo "$SH" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$SH" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool SH=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool SH=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for SH" >&5
-$as_echo_n "checking for SH... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool SH=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
- if test "x$SH" = x; then
- as_fn_error $? "Could not find required tool for SH" "$LINENO" 5
- fi
-
-
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${SORT+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in sort
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_SORT+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $SORT in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_SORT="$SORT" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_SORT="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-SORT=$ac_cv_path_SORT
-if test -n "$SORT"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $SORT" >&5
-$as_echo "$SORT" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$SORT" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !SORT! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!SORT!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xSORT" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of SORT from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of SORT from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in sort
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_SORT+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $SORT in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_SORT="$SORT" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_SORT="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-SORT=$ac_cv_path_SORT
-if test -n "$SORT"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $SORT" >&5
-$as_echo "$SORT" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$SORT" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$SORT" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool SORT= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool SORT= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for SORT" >&5
-$as_echo_n "checking for SORT... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$SORT"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool SORT=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool SORT=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_SORT+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $SORT in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_SORT="$SORT" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_SORT="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-SORT=$ac_cv_path_SORT
-if test -n "$SORT"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $SORT" >&5
-$as_echo "$SORT" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$SORT" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool SORT=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool SORT=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for SORT" >&5
-$as_echo_n "checking for SORT... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool SORT=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
- if test "x$SORT" = x; then
- as_fn_error $? "Could not find required tool for SORT" "$LINENO" 5
- fi
-
-
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${TAIL+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in tail
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_TAIL+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $TAIL in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_TAIL="$TAIL" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_TAIL="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-TAIL=$ac_cv_path_TAIL
-if test -n "$TAIL"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $TAIL" >&5
-$as_echo "$TAIL" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$TAIL" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !TAIL! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!TAIL!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xTAIL" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of TAIL from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of TAIL from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in tail
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_TAIL+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $TAIL in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_TAIL="$TAIL" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_TAIL="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-TAIL=$ac_cv_path_TAIL
-if test -n "$TAIL"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $TAIL" >&5
-$as_echo "$TAIL" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$TAIL" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$TAIL" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool TAIL= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool TAIL= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for TAIL" >&5
-$as_echo_n "checking for TAIL... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$TAIL"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool TAIL=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool TAIL=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_TAIL+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $TAIL in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_TAIL="$TAIL" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_TAIL="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-TAIL=$ac_cv_path_TAIL
-if test -n "$TAIL"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $TAIL" >&5
-$as_echo "$TAIL" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$TAIL" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool TAIL=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool TAIL=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for TAIL" >&5
-$as_echo_n "checking for TAIL... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool TAIL=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
- if test "x$TAIL" = x; then
- as_fn_error $? "Could not find required tool for TAIL" "$LINENO" 5
- fi
-
-
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${TAR+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in gtar tar
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_TAR+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $TAR in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_TAR="$TAR" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_TAR="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-TAR=$ac_cv_path_TAR
-if test -n "$TAR"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $TAR" >&5
-$as_echo "$TAR" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$TAR" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !TAR! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!TAR!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xTAR" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of TAR from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of TAR from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in gtar tar
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_TAR+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $TAR in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_TAR="$TAR" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_TAR="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-TAR=$ac_cv_path_TAR
-if test -n "$TAR"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $TAR" >&5
-$as_echo "$TAR" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$TAR" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$TAR" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool TAR= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool TAR= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for TAR" >&5
-$as_echo_n "checking for TAR... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$TAR"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool TAR=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool TAR=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_TAR+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $TAR in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_TAR="$TAR" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_TAR="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-TAR=$ac_cv_path_TAR
-if test -n "$TAR"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $TAR" >&5
-$as_echo "$TAR" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$TAR" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool TAR=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool TAR=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for TAR" >&5
-$as_echo_n "checking for TAR... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool TAR=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
- if test "x$TAR" = x; then
- as_fn_error $? "Could not find required tool for TAR" "$LINENO" 5
- fi
-
-
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${TEE+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in tee
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_TEE+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $TEE in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_TEE="$TEE" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_TEE="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-TEE=$ac_cv_path_TEE
-if test -n "$TEE"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $TEE" >&5
-$as_echo "$TEE" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$TEE" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !TEE! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!TEE!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xTEE" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of TEE from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of TEE from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in tee
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_TEE+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $TEE in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_TEE="$TEE" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_TEE="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-TEE=$ac_cv_path_TEE
-if test -n "$TEE"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $TEE" >&5
-$as_echo "$TEE" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$TEE" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$TEE" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool TEE= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool TEE= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for TEE" >&5
-$as_echo_n "checking for TEE... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$TEE"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool TEE=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool TEE=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_TEE+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $TEE in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_TEE="$TEE" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_TEE="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-TEE=$ac_cv_path_TEE
-if test -n "$TEE"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $TEE" >&5
-$as_echo "$TEE" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$TEE" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool TEE=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool TEE=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for TEE" >&5
-$as_echo_n "checking for TEE... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool TEE=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
- if test "x$TEE" = x; then
- as_fn_error $? "Could not find required tool for TEE" "$LINENO" 5
- fi
-
-
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${TOUCH+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in touch
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_TOUCH+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $TOUCH in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_TOUCH="$TOUCH" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_TOUCH="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-TOUCH=$ac_cv_path_TOUCH
-if test -n "$TOUCH"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $TOUCH" >&5
-$as_echo "$TOUCH" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$TOUCH" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !TOUCH! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!TOUCH!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xTOUCH" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of TOUCH from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of TOUCH from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in touch
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_TOUCH+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $TOUCH in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_TOUCH="$TOUCH" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_TOUCH="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-TOUCH=$ac_cv_path_TOUCH
-if test -n "$TOUCH"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $TOUCH" >&5
-$as_echo "$TOUCH" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$TOUCH" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$TOUCH" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool TOUCH= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool TOUCH= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for TOUCH" >&5
-$as_echo_n "checking for TOUCH... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$TOUCH"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool TOUCH=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool TOUCH=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_TOUCH+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $TOUCH in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_TOUCH="$TOUCH" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_TOUCH="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-TOUCH=$ac_cv_path_TOUCH
-if test -n "$TOUCH"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $TOUCH" >&5
-$as_echo "$TOUCH" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$TOUCH" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool TOUCH=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool TOUCH=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for TOUCH" >&5
-$as_echo_n "checking for TOUCH... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool TOUCH=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
- if test "x$TOUCH" = x; then
- as_fn_error $? "Could not find required tool for TOUCH" "$LINENO" 5
- fi
-
-
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${TR+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in tr
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_TR+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $TR in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_TR="$TR" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_TR="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-TR=$ac_cv_path_TR
-if test -n "$TR"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $TR" >&5
-$as_echo "$TR" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$TR" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !TR! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!TR!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xTR" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of TR from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of TR from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in tr
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_TR+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $TR in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_TR="$TR" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_TR="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-TR=$ac_cv_path_TR
-if test -n "$TR"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $TR" >&5
-$as_echo "$TR" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$TR" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$TR" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool TR= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool TR= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for TR" >&5
-$as_echo_n "checking for TR... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$TR"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool TR=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool TR=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_TR+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $TR in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_TR="$TR" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_TR="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-TR=$ac_cv_path_TR
-if test -n "$TR"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $TR" >&5
-$as_echo "$TR" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$TR" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool TR=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool TR=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for TR" >&5
-$as_echo_n "checking for TR... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool TR=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
- if test "x$TR" = x; then
- as_fn_error $? "Could not find required tool for TR" "$LINENO" 5
- fi
-
-
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${UNAME+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in uname
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_UNAME+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $UNAME in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_UNAME="$UNAME" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_UNAME="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-UNAME=$ac_cv_path_UNAME
-if test -n "$UNAME"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $UNAME" >&5
-$as_echo "$UNAME" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$UNAME" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !UNAME! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!UNAME!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xUNAME" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of UNAME from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of UNAME from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in uname
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_UNAME+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $UNAME in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_UNAME="$UNAME" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_UNAME="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-UNAME=$ac_cv_path_UNAME
-if test -n "$UNAME"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $UNAME" >&5
-$as_echo "$UNAME" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$UNAME" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$UNAME" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool UNAME= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool UNAME= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for UNAME" >&5
-$as_echo_n "checking for UNAME... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$UNAME"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool UNAME=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool UNAME=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_UNAME+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $UNAME in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_UNAME="$UNAME" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_UNAME="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-UNAME=$ac_cv_path_UNAME
-if test -n "$UNAME"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $UNAME" >&5
-$as_echo "$UNAME" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$UNAME" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool UNAME=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool UNAME=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for UNAME" >&5
-$as_echo_n "checking for UNAME... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool UNAME=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
- if test "x$UNAME" = x; then
- as_fn_error $? "Could not find required tool for UNAME" "$LINENO" 5
- fi
-
-
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${UNIQ+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in uniq
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_UNIQ+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $UNIQ in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_UNIQ="$UNIQ" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_UNIQ="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-UNIQ=$ac_cv_path_UNIQ
-if test -n "$UNIQ"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $UNIQ" >&5
-$as_echo "$UNIQ" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$UNIQ" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !UNIQ! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!UNIQ!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xUNIQ" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of UNIQ from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of UNIQ from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in uniq
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_UNIQ+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $UNIQ in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_UNIQ="$UNIQ" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_UNIQ="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-UNIQ=$ac_cv_path_UNIQ
-if test -n "$UNIQ"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $UNIQ" >&5
-$as_echo "$UNIQ" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$UNIQ" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$UNIQ" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool UNIQ= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool UNIQ= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for UNIQ" >&5
-$as_echo_n "checking for UNIQ... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$UNIQ"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool UNIQ=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool UNIQ=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_UNIQ+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $UNIQ in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_UNIQ="$UNIQ" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_UNIQ="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-UNIQ=$ac_cv_path_UNIQ
-if test -n "$UNIQ"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $UNIQ" >&5
-$as_echo "$UNIQ" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$UNIQ" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool UNIQ=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool UNIQ=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for UNIQ" >&5
-$as_echo_n "checking for UNIQ... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool UNIQ=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
- if test "x$UNIQ" = x; then
- as_fn_error $? "Could not find required tool for UNIQ" "$LINENO" 5
- fi
-
-
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${WC+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in wc
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_WC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $WC in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_WC="$WC" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_WC="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-WC=$ac_cv_path_WC
-if test -n "$WC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $WC" >&5
-$as_echo "$WC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$WC" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !WC! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!WC!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xWC" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of WC from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of WC from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in wc
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_WC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $WC in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_WC="$WC" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_WC="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-WC=$ac_cv_path_WC
-if test -n "$WC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $WC" >&5
-$as_echo "$WC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$WC" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$WC" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool WC= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool WC= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for WC" >&5
-$as_echo_n "checking for WC... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$WC"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool WC=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool WC=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_WC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $WC in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_WC="$WC" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_WC="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-WC=$ac_cv_path_WC
-if test -n "$WC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $WC" >&5
-$as_echo "$WC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$WC" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool WC=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool WC=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for WC" >&5
-$as_echo_n "checking for WC... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool WC=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
- if test "x$WC" = x; then
- as_fn_error $? "Could not find required tool for WC" "$LINENO" 5
- fi
-
-
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${WHICH+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in which
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_WHICH+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $WHICH in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_WHICH="$WHICH" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_WHICH="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-WHICH=$ac_cv_path_WHICH
-if test -n "$WHICH"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $WHICH" >&5
-$as_echo "$WHICH" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$WHICH" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !WHICH! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!WHICH!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xWHICH" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of WHICH from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of WHICH from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in which
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_WHICH+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $WHICH in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_WHICH="$WHICH" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_WHICH="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-WHICH=$ac_cv_path_WHICH
-if test -n "$WHICH"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $WHICH" >&5
-$as_echo "$WHICH" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$WHICH" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$WHICH" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool WHICH= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool WHICH= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for WHICH" >&5
-$as_echo_n "checking for WHICH... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$WHICH"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool WHICH=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool WHICH=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_WHICH+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $WHICH in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_WHICH="$WHICH" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_WHICH="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-WHICH=$ac_cv_path_WHICH
-if test -n "$WHICH"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $WHICH" >&5
-$as_echo "$WHICH" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$WHICH" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool WHICH=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool WHICH=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for WHICH" >&5
-$as_echo_n "checking for WHICH... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool WHICH=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
- if test "x$WHICH" = x; then
- as_fn_error $? "Could not find required tool for WHICH" "$LINENO" 5
- fi
-
-
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${XARGS+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in xargs
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_XARGS+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $XARGS in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_XARGS="$XARGS" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_XARGS="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-XARGS=$ac_cv_path_XARGS
-if test -n "$XARGS"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $XARGS" >&5
-$as_echo "$XARGS" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$XARGS" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !XARGS! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!XARGS!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xXARGS" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of XARGS from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of XARGS from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in xargs
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_XARGS+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $XARGS in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_XARGS="$XARGS" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_XARGS="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-XARGS=$ac_cv_path_XARGS
-if test -n "$XARGS"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $XARGS" >&5
-$as_echo "$XARGS" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$XARGS" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$XARGS" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool XARGS= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool XARGS= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for XARGS" >&5
-$as_echo_n "checking for XARGS... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$XARGS"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool XARGS=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool XARGS=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_XARGS+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $XARGS in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_XARGS="$XARGS" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_XARGS="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-XARGS=$ac_cv_path_XARGS
-if test -n "$XARGS"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $XARGS" >&5
-$as_echo "$XARGS" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$XARGS" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool XARGS=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool XARGS=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for XARGS" >&5
-$as_echo_n "checking for XARGS... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool XARGS=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
- if test "x$XARGS" = x; then
- as_fn_error $? "Could not find required tool for XARGS" "$LINENO" 5
- fi
-
-
-
- # Then required tools that require some special treatment.
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${AWK+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in gawk mawk nawk awk
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_AWK+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$AWK"; then
- ac_cv_prog_AWK="$AWK" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_AWK="$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-AWK=$ac_cv_prog_AWK
-if test -n "$AWK"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
-$as_echo "$AWK" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$AWK" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !AWK! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!AWK!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xAWK" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of AWK from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of AWK from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in gawk mawk nawk awk
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_AWK+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$AWK"; then
- ac_cv_prog_AWK="$AWK" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_AWK="$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-AWK=$ac_cv_prog_AWK
-if test -n "$AWK"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
-$as_echo "$AWK" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$AWK" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$AWK" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool AWK= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool AWK= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for AWK" >&5
-$as_echo_n "checking for AWK... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$AWK"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool AWK=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool AWK=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_AWK+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $AWK in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_AWK="$AWK" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_AWK="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-AWK=$ac_cv_path_AWK
-if test -n "$AWK"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
-$as_echo "$AWK" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$AWK" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool AWK=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool AWK=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for AWK" >&5
-$as_echo_n "checking for AWK... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool AWK=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
- if test "x$AWK" = x; then
- as_fn_error $? "Could not find required tool for AWK" "$LINENO" 5
- fi
-
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${GREP+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
-$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
-if ${ac_cv_path_GREP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -z "$GREP"; then
- ac_path_GREP_found=false
- # Loop through the user's path and test for each of PROGNAME-LIST
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_prog in grep ggrep; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
- as_fn_executable_p "$ac_path_GREP" || continue
-# Check for GNU ac_path_GREP and select it if it is found.
- # Check for GNU $ac_path_GREP
-case `"$ac_path_GREP" --version 2>&1` in
-*GNU*)
- ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
-*)
- ac_count=0
- $as_echo_n 0123456789 >"conftest.in"
- while :
- do
- cat "conftest.in" "conftest.in" >"conftest.tmp"
- mv "conftest.tmp" "conftest.in"
- cp "conftest.in" "conftest.nl"
- $as_echo 'GREP' >> "conftest.nl"
- "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
- diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
- as_fn_arith $ac_count + 1 && ac_count=$as_val
- if test $ac_count -gt ${ac_path_GREP_max-0}; then
- # Best one so far, save it but keep looking for a better one
- ac_cv_path_GREP="$ac_path_GREP"
- ac_path_GREP_max=$ac_count
- fi
- # 10*(2^10) chars as input seems more than enough
- test $ac_count -gt 10 && break
- done
- rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-esac
-
- $ac_path_GREP_found && break 3
- done
- done
- done
-IFS=$as_save_IFS
- if test -z "$ac_cv_path_GREP"; then
- as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
- fi
-else
- ac_cv_path_GREP=$GREP
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
-$as_echo "$ac_cv_path_GREP" >&6; }
- GREP="$ac_cv_path_GREP"
-
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !GREP! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!GREP!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xGREP" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of GREP from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of GREP from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
-$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
-if ${ac_cv_path_GREP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -z "$GREP"; then
- ac_path_GREP_found=false
- # Loop through the user's path and test for each of PROGNAME-LIST
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_prog in grep ggrep; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
- as_fn_executable_p "$ac_path_GREP" || continue
-# Check for GNU ac_path_GREP and select it if it is found.
- # Check for GNU $ac_path_GREP
-case `"$ac_path_GREP" --version 2>&1` in
-*GNU*)
- ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
-*)
- ac_count=0
- $as_echo_n 0123456789 >"conftest.in"
- while :
- do
- cat "conftest.in" "conftest.in" >"conftest.tmp"
- mv "conftest.tmp" "conftest.in"
- cp "conftest.in" "conftest.nl"
- $as_echo 'GREP' >> "conftest.nl"
- "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
- diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
- as_fn_arith $ac_count + 1 && ac_count=$as_val
- if test $ac_count -gt ${ac_path_GREP_max-0}; then
- # Best one so far, save it but keep looking for a better one
- ac_cv_path_GREP="$ac_path_GREP"
- ac_path_GREP_max=$ac_count
- fi
- # 10*(2^10) chars as input seems more than enough
- test $ac_count -gt 10 && break
- done
- rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-esac
-
- $ac_path_GREP_found && break 3
- done
- done
- done
-IFS=$as_save_IFS
- if test -z "$ac_cv_path_GREP"; then
- as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
- fi
-else
- ac_cv_path_GREP=$GREP
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
-$as_echo "$ac_cv_path_GREP" >&6; }
- GREP="$ac_cv_path_GREP"
-
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$GREP" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool GREP= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool GREP= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GREP" >&5
-$as_echo_n "checking for GREP... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$GREP"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool GREP=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool GREP=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_GREP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $GREP in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_GREP="$GREP" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_GREP="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-GREP=$ac_cv_path_GREP
-if test -n "$GREP"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GREP" >&5
-$as_echo "$GREP" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$GREP" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool GREP=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool GREP=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GREP" >&5
-$as_echo_n "checking for GREP... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool GREP=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
- if test "x$GREP" = x; then
- as_fn_error $? "Could not find required tool for GREP" "$LINENO" 5
- fi
-
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${EGREP+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
-$as_echo_n "checking for egrep... " >&6; }
-if ${ac_cv_path_EGREP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
- then ac_cv_path_EGREP="$GREP -E"
- else
- if test -z "$EGREP"; then
- ac_path_EGREP_found=false
- # Loop through the user's path and test for each of PROGNAME-LIST
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_prog in egrep; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
- as_fn_executable_p "$ac_path_EGREP" || continue
-# Check for GNU ac_path_EGREP and select it if it is found.
- # Check for GNU $ac_path_EGREP
-case `"$ac_path_EGREP" --version 2>&1` in
-*GNU*)
- ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
-*)
- ac_count=0
- $as_echo_n 0123456789 >"conftest.in"
- while :
- do
- cat "conftest.in" "conftest.in" >"conftest.tmp"
- mv "conftest.tmp" "conftest.in"
- cp "conftest.in" "conftest.nl"
- $as_echo 'EGREP' >> "conftest.nl"
- "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
- diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
- as_fn_arith $ac_count + 1 && ac_count=$as_val
- if test $ac_count -gt ${ac_path_EGREP_max-0}; then
- # Best one so far, save it but keep looking for a better one
- ac_cv_path_EGREP="$ac_path_EGREP"
- ac_path_EGREP_max=$ac_count
- fi
- # 10*(2^10) chars as input seems more than enough
- test $ac_count -gt 10 && break
- done
- rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-esac
-
- $ac_path_EGREP_found && break 3
- done
- done
- done
-IFS=$as_save_IFS
- if test -z "$ac_cv_path_EGREP"; then
- as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
- fi
-else
- ac_cv_path_EGREP=$EGREP
-fi
-
- fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
-$as_echo "$ac_cv_path_EGREP" >&6; }
- EGREP="$ac_cv_path_EGREP"
-
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !EGREP! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!EGREP!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xEGREP" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of EGREP from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of EGREP from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
-$as_echo_n "checking for egrep... " >&6; }
-if ${ac_cv_path_EGREP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
- then ac_cv_path_EGREP="$GREP -E"
- else
- if test -z "$EGREP"; then
- ac_path_EGREP_found=false
- # Loop through the user's path and test for each of PROGNAME-LIST
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_prog in egrep; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
- as_fn_executable_p "$ac_path_EGREP" || continue
-# Check for GNU ac_path_EGREP and select it if it is found.
- # Check for GNU $ac_path_EGREP
-case `"$ac_path_EGREP" --version 2>&1` in
-*GNU*)
- ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
-*)
- ac_count=0
- $as_echo_n 0123456789 >"conftest.in"
- while :
- do
- cat "conftest.in" "conftest.in" >"conftest.tmp"
- mv "conftest.tmp" "conftest.in"
- cp "conftest.in" "conftest.nl"
- $as_echo 'EGREP' >> "conftest.nl"
- "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
- diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
- as_fn_arith $ac_count + 1 && ac_count=$as_val
- if test $ac_count -gt ${ac_path_EGREP_max-0}; then
- # Best one so far, save it but keep looking for a better one
- ac_cv_path_EGREP="$ac_path_EGREP"
- ac_path_EGREP_max=$ac_count
- fi
- # 10*(2^10) chars as input seems more than enough
- test $ac_count -gt 10 && break
- done
- rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-esac
-
- $ac_path_EGREP_found && break 3
- done
- done
- done
-IFS=$as_save_IFS
- if test -z "$ac_cv_path_EGREP"; then
- as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
- fi
-else
- ac_cv_path_EGREP=$EGREP
-fi
-
- fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
-$as_echo "$ac_cv_path_EGREP" >&6; }
- EGREP="$ac_cv_path_EGREP"
-
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$EGREP" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool EGREP= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool EGREP= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for EGREP" >&5
-$as_echo_n "checking for EGREP... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$EGREP"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool EGREP=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool EGREP=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_EGREP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $EGREP in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_EGREP="$EGREP" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_EGREP="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-EGREP=$ac_cv_path_EGREP
-if test -n "$EGREP"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $EGREP" >&5
-$as_echo "$EGREP" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$EGREP" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool EGREP=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool EGREP=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for EGREP" >&5
-$as_echo_n "checking for EGREP... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool EGREP=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
- if test "x$EGREP" = x; then
- as_fn_error $? "Could not find required tool for EGREP" "$LINENO" 5
- fi
-
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${FGREP+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5
-$as_echo_n "checking for fgrep... " >&6; }
-if ${ac_cv_path_FGREP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1
- then ac_cv_path_FGREP="$GREP -F"
- else
- if test -z "$FGREP"; then
- ac_path_FGREP_found=false
- # Loop through the user's path and test for each of PROGNAME-LIST
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_prog in fgrep; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext"
- as_fn_executable_p "$ac_path_FGREP" || continue
-# Check for GNU ac_path_FGREP and select it if it is found.
- # Check for GNU $ac_path_FGREP
-case `"$ac_path_FGREP" --version 2>&1` in
-*GNU*)
- ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;;
-*)
- ac_count=0
- $as_echo_n 0123456789 >"conftest.in"
- while :
- do
- cat "conftest.in" "conftest.in" >"conftest.tmp"
- mv "conftest.tmp" "conftest.in"
- cp "conftest.in" "conftest.nl"
- $as_echo 'FGREP' >> "conftest.nl"
- "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break
- diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
- as_fn_arith $ac_count + 1 && ac_count=$as_val
- if test $ac_count -gt ${ac_path_FGREP_max-0}; then
- # Best one so far, save it but keep looking for a better one
- ac_cv_path_FGREP="$ac_path_FGREP"
- ac_path_FGREP_max=$ac_count
- fi
- # 10*(2^10) chars as input seems more than enough
- test $ac_count -gt 10 && break
- done
- rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-esac
-
- $ac_path_FGREP_found && break 3
- done
- done
- done
-IFS=$as_save_IFS
- if test -z "$ac_cv_path_FGREP"; then
- as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
- fi
-else
- ac_cv_path_FGREP=$FGREP
-fi
-
- fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5
-$as_echo "$ac_cv_path_FGREP" >&6; }
- FGREP="$ac_cv_path_FGREP"
-
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !FGREP! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!FGREP!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xFGREP" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of FGREP from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of FGREP from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5
-$as_echo_n "checking for fgrep... " >&6; }
-if ${ac_cv_path_FGREP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1
- then ac_cv_path_FGREP="$GREP -F"
- else
- if test -z "$FGREP"; then
- ac_path_FGREP_found=false
- # Loop through the user's path and test for each of PROGNAME-LIST
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_prog in fgrep; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext"
- as_fn_executable_p "$ac_path_FGREP" || continue
-# Check for GNU ac_path_FGREP and select it if it is found.
- # Check for GNU $ac_path_FGREP
-case `"$ac_path_FGREP" --version 2>&1` in
-*GNU*)
- ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;;
-*)
- ac_count=0
- $as_echo_n 0123456789 >"conftest.in"
- while :
- do
- cat "conftest.in" "conftest.in" >"conftest.tmp"
- mv "conftest.tmp" "conftest.in"
- cp "conftest.in" "conftest.nl"
- $as_echo 'FGREP' >> "conftest.nl"
- "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break
- diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
- as_fn_arith $ac_count + 1 && ac_count=$as_val
- if test $ac_count -gt ${ac_path_FGREP_max-0}; then
- # Best one so far, save it but keep looking for a better one
- ac_cv_path_FGREP="$ac_path_FGREP"
- ac_path_FGREP_max=$ac_count
- fi
- # 10*(2^10) chars as input seems more than enough
- test $ac_count -gt 10 && break
- done
- rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-esac
-
- $ac_path_FGREP_found && break 3
- done
- done
- done
-IFS=$as_save_IFS
- if test -z "$ac_cv_path_FGREP"; then
- as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
- fi
-else
- ac_cv_path_FGREP=$FGREP
-fi
-
- fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5
-$as_echo "$ac_cv_path_FGREP" >&6; }
- FGREP="$ac_cv_path_FGREP"
-
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$FGREP" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool FGREP= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool FGREP= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for FGREP" >&5
-$as_echo_n "checking for FGREP... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$FGREP"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool FGREP=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool FGREP=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_FGREP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $FGREP in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_FGREP="$FGREP" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_FGREP="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-FGREP=$ac_cv_path_FGREP
-if test -n "$FGREP"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $FGREP" >&5
-$as_echo "$FGREP" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$FGREP" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool FGREP=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool FGREP=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for FGREP" >&5
-$as_echo_n "checking for FGREP... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool FGREP=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
- if test "x$FGREP" = x; then
- as_fn_error $? "Could not find required tool for FGREP" "$LINENO" 5
- fi
-
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${SED+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
-$as_echo_n "checking for a sed that does not truncate output... " >&6; }
-if ${ac_cv_path_SED+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
- for ac_i in 1 2 3 4 5 6 7; do
- ac_script="$ac_script$as_nl$ac_script"
- done
- echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed
- { ac_script=; unset ac_script;}
- if test -z "$SED"; then
- ac_path_SED_found=false
- # Loop through the user's path and test for each of PROGNAME-LIST
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_prog in sed gsed; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
- as_fn_executable_p "$ac_path_SED" || continue
-# Check for GNU ac_path_SED and select it if it is found.
- # Check for GNU $ac_path_SED
-case `"$ac_path_SED" --version 2>&1` in
-*GNU*)
- ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;;
-*)
- ac_count=0
- $as_echo_n 0123456789 >"conftest.in"
- while :
- do
- cat "conftest.in" "conftest.in" >"conftest.tmp"
- mv "conftest.tmp" "conftest.in"
- cp "conftest.in" "conftest.nl"
- $as_echo '' >> "conftest.nl"
- "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break
- diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
- as_fn_arith $ac_count + 1 && ac_count=$as_val
- if test $ac_count -gt ${ac_path_SED_max-0}; then
- # Best one so far, save it but keep looking for a better one
- ac_cv_path_SED="$ac_path_SED"
- ac_path_SED_max=$ac_count
- fi
- # 10*(2^10) chars as input seems more than enough
- test $ac_count -gt 10 && break
- done
- rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-esac
-
- $ac_path_SED_found && break 3
- done
- done
- done
-IFS=$as_save_IFS
- if test -z "$ac_cv_path_SED"; then
- as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5
- fi
-else
- ac_cv_path_SED=$SED
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5
-$as_echo "$ac_cv_path_SED" >&6; }
- SED="$ac_cv_path_SED"
- rm -f conftest.sed
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !SED! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!SED!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xSED" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of SED from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of SED from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
-$as_echo_n "checking for a sed that does not truncate output... " >&6; }
-if ${ac_cv_path_SED+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
- for ac_i in 1 2 3 4 5 6 7; do
- ac_script="$ac_script$as_nl$ac_script"
- done
- echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed
- { ac_script=; unset ac_script;}
- if test -z "$SED"; then
- ac_path_SED_found=false
- # Loop through the user's path and test for each of PROGNAME-LIST
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_prog in sed gsed; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
- as_fn_executable_p "$ac_path_SED" || continue
-# Check for GNU ac_path_SED and select it if it is found.
- # Check for GNU $ac_path_SED
-case `"$ac_path_SED" --version 2>&1` in
-*GNU*)
- ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;;
-*)
- ac_count=0
- $as_echo_n 0123456789 >"conftest.in"
- while :
- do
- cat "conftest.in" "conftest.in" >"conftest.tmp"
- mv "conftest.tmp" "conftest.in"
- cp "conftest.in" "conftest.nl"
- $as_echo '' >> "conftest.nl"
- "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break
- diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
- as_fn_arith $ac_count + 1 && ac_count=$as_val
- if test $ac_count -gt ${ac_path_SED_max-0}; then
- # Best one so far, save it but keep looking for a better one
- ac_cv_path_SED="$ac_path_SED"
- ac_path_SED_max=$ac_count
- fi
- # 10*(2^10) chars as input seems more than enough
- test $ac_count -gt 10 && break
- done
- rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-esac
-
- $ac_path_SED_found && break 3
- done
- done
- done
-IFS=$as_save_IFS
- if test -z "$ac_cv_path_SED"; then
- as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5
- fi
-else
- ac_cv_path_SED=$SED
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5
-$as_echo "$ac_cv_path_SED" >&6; }
- SED="$ac_cv_path_SED"
- rm -f conftest.sed
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$SED" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool SED= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool SED= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for SED" >&5
-$as_echo_n "checking for SED... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$SED"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool SED=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool SED=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_SED+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $SED in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_SED="$SED" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_SED="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-SED=$ac_cv_path_SED
-if test -n "$SED"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $SED" >&5
-$as_echo "$SED" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$SED" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool SED=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool SED=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for SED" >&5
-$as_echo_n "checking for SED... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool SED=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
- if test "x$SED" = x; then
- as_fn_error $? "Could not find required tool for SED" "$LINENO" 5
- fi
-
-
-
- # Always force rm.
- RM="$RM -f"
-
- # pwd behaves differently on various platforms and some don't support the -L flag.
- # Always use the bash builtin pwd to get uniform behavior.
- THEPWDCMD=pwd
-
- # These are not required on all platforms
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${CYGPATH+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in cygpath
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_CYGPATH+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $CYGPATH in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_CYGPATH="$CYGPATH" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_CYGPATH="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-CYGPATH=$ac_cv_path_CYGPATH
-if test -n "$CYGPATH"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CYGPATH" >&5
-$as_echo "$CYGPATH" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$CYGPATH" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !CYGPATH! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!CYGPATH!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xCYGPATH" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of CYGPATH from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of CYGPATH from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in cygpath
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_CYGPATH+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $CYGPATH in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_CYGPATH="$CYGPATH" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_CYGPATH="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-CYGPATH=$ac_cv_path_CYGPATH
-if test -n "$CYGPATH"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CYGPATH" >&5
-$as_echo "$CYGPATH" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$CYGPATH" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$CYGPATH" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool CYGPATH= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool CYGPATH= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CYGPATH" >&5
-$as_echo_n "checking for CYGPATH... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$CYGPATH"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool CYGPATH=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool CYGPATH=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_CYGPATH+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $CYGPATH in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_CYGPATH="$CYGPATH" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_CYGPATH="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-CYGPATH=$ac_cv_path_CYGPATH
-if test -n "$CYGPATH"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CYGPATH" >&5
-$as_echo "$CYGPATH" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$CYGPATH" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool CYGPATH=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool CYGPATH=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CYGPATH" >&5
-$as_echo_n "checking for CYGPATH... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool CYGPATH=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${READLINK+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in greadlink readlink
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_READLINK+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $READLINK in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_READLINK="$READLINK" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_READLINK="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-READLINK=$ac_cv_path_READLINK
-if test -n "$READLINK"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $READLINK" >&5
-$as_echo "$READLINK" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$READLINK" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !READLINK! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!READLINK!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xREADLINK" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of READLINK from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of READLINK from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in greadlink readlink
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_READLINK+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $READLINK in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_READLINK="$READLINK" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_READLINK="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-READLINK=$ac_cv_path_READLINK
-if test -n "$READLINK"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $READLINK" >&5
-$as_echo "$READLINK" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$READLINK" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$READLINK" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool READLINK= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool READLINK= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for READLINK" >&5
-$as_echo_n "checking for READLINK... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$READLINK"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool READLINK=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool READLINK=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_READLINK+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $READLINK in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_READLINK="$READLINK" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_READLINK="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-READLINK=$ac_cv_path_READLINK
-if test -n "$READLINK"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $READLINK" >&5
-$as_echo "$READLINK" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$READLINK" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool READLINK=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool READLINK=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for READLINK" >&5
-$as_echo_n "checking for READLINK... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool READLINK=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${DF+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in df
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_DF+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $DF in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_DF="$DF" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_DF="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-DF=$ac_cv_path_DF
-if test -n "$DF"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DF" >&5
-$as_echo "$DF" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$DF" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !DF! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!DF!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xDF" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of DF from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of DF from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in df
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_DF+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $DF in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_DF="$DF" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_DF="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-DF=$ac_cv_path_DF
-if test -n "$DF"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DF" >&5
-$as_echo "$DF" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$DF" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$DF" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool DF= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool DF= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for DF" >&5
-$as_echo_n "checking for DF... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$DF"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool DF=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool DF=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_DF+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $DF in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_DF="$DF" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_DF="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-DF=$ac_cv_path_DF
-if test -n "$DF"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DF" >&5
-$as_echo "$DF" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$DF" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool DF=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool DF=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for DF" >&5
-$as_echo_n "checking for DF... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool DF=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${CPIO+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in cpio bsdcpio
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_CPIO+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $CPIO in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_CPIO="$CPIO" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_CPIO="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-CPIO=$ac_cv_path_CPIO
-if test -n "$CPIO"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPIO" >&5
-$as_echo "$CPIO" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$CPIO" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !CPIO! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!CPIO!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xCPIO" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of CPIO from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of CPIO from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in cpio bsdcpio
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_CPIO+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $CPIO in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_CPIO="$CPIO" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_CPIO="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-CPIO=$ac_cv_path_CPIO
-if test -n "$CPIO"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPIO" >&5
-$as_echo "$CPIO" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$CPIO" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$CPIO" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool CPIO= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool CPIO= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CPIO" >&5
-$as_echo_n "checking for CPIO... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$CPIO"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool CPIO=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool CPIO=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_CPIO+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $CPIO in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_CPIO="$CPIO" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_CPIO="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-CPIO=$ac_cv_path_CPIO
-if test -n "$CPIO"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPIO" >&5
-$as_echo "$CPIO" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$CPIO" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool CPIO=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool CPIO=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CPIO" >&5
-$as_echo_n "checking for CPIO... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool CPIO=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${NICE+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in nice
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_NICE+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $NICE in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_NICE="$NICE" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_NICE="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-NICE=$ac_cv_path_NICE
-if test -n "$NICE"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NICE" >&5
-$as_echo "$NICE" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$NICE" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !NICE! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!NICE!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xNICE" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of NICE from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of NICE from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in nice
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_NICE+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $NICE in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_NICE="$NICE" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_NICE="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-NICE=$ac_cv_path_NICE
-if test -n "$NICE"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NICE" >&5
-$as_echo "$NICE" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$NICE" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$NICE" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool NICE= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool NICE= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for NICE" >&5
-$as_echo_n "checking for NICE... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$NICE"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool NICE=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool NICE=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_NICE+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $NICE in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_NICE="$NICE" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_NICE="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-NICE=$ac_cv_path_NICE
-if test -n "$NICE"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NICE" >&5
-$as_echo "$NICE" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$NICE" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool NICE=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool NICE=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for NICE" >&5
-$as_echo_n "checking for NICE... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool NICE=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${PANDOC+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in pandoc
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_PANDOC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $PANDOC in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_PANDOC="$PANDOC" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_PANDOC="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-PANDOC=$ac_cv_path_PANDOC
-if test -n "$PANDOC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PANDOC" >&5
-$as_echo "$PANDOC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$PANDOC" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !PANDOC! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!PANDOC!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xPANDOC" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of PANDOC from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of PANDOC from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in pandoc
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_PANDOC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $PANDOC in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_PANDOC="$PANDOC" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_PANDOC="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-PANDOC=$ac_cv_path_PANDOC
-if test -n "$PANDOC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PANDOC" >&5
-$as_echo "$PANDOC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$PANDOC" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$PANDOC" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool PANDOC= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool PANDOC= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for PANDOC" >&5
-$as_echo_n "checking for PANDOC... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$PANDOC"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool PANDOC=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool PANDOC=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_PANDOC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $PANDOC in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_PANDOC="$PANDOC" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_PANDOC="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-PANDOC=$ac_cv_path_PANDOC
-if test -n "$PANDOC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PANDOC" >&5
-$as_echo "$PANDOC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$PANDOC" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool PANDOC=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool PANDOC=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for PANDOC" >&5
-$as_echo_n "checking for PANDOC... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool PANDOC=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
-
-# Now we can determine OpenJDK build and target platforms. This is required to
-# have early on.
-# Make sure we can run config.sub.
-$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
- as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
-$as_echo_n "checking build system type... " >&6; }
-if ${ac_cv_build+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_build_alias=$build_alias
-test "x$ac_build_alias" = x &&
- ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
-test "x$ac_build_alias" = x &&
- as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
-ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
- as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
-$as_echo "$ac_cv_build" >&6; }
-case $ac_cv_build in
-*-*-*) ;;
-*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;;
-esac
-build=$ac_cv_build
-ac_save_IFS=$IFS; IFS='-'
-set x $ac_cv_build
-shift
-build_cpu=$1
-build_vendor=$2
-shift; shift
-# Remember, the first character of IFS is used to create $*,
-# except with old shells:
-build_os=$*
-IFS=$ac_save_IFS
-case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
-$as_echo_n "checking host system type... " >&6; }
-if ${ac_cv_host+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test "x$host_alias" = x; then
- ac_cv_host=$ac_cv_build
-else
- ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
- as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
-$as_echo "$ac_cv_host" >&6; }
-case $ac_cv_host in
-*-*-*) ;;
-*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;;
-esac
-host=$ac_cv_host
-ac_save_IFS=$IFS; IFS='-'
-set x $ac_cv_host
-shift
-host_cpu=$1
-host_vendor=$2
-shift; shift
-# Remember, the first character of IFS is used to create $*,
-# except with old shells:
-host_os=$*
-IFS=$ac_save_IFS
-case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking target system type" >&5
-$as_echo_n "checking target system type... " >&6; }
-if ${ac_cv_target+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test "x$target_alias" = x; then
- ac_cv_target=$ac_cv_host
-else
- ac_cv_target=`$SHELL "$ac_aux_dir/config.sub" $target_alias` ||
- as_fn_error $? "$SHELL $ac_aux_dir/config.sub $target_alias failed" "$LINENO" 5
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_target" >&5
-$as_echo "$ac_cv_target" >&6; }
-case $ac_cv_target in
-*-*-*) ;;
-*) as_fn_error $? "invalid value of canonical target" "$LINENO" 5;;
-esac
-target=$ac_cv_target
-ac_save_IFS=$IFS; IFS='-'
-set x $ac_cv_target
-shift
-target_cpu=$1
-target_vendor=$2
-shift; shift
-# Remember, the first character of IFS is used to create $*,
-# except with old shells:
-target_os=$*
-IFS=$ac_save_IFS
-case $target_os in *\ *) target_os=`echo "$target_os" | sed 's/ /-/g'`;; esac
-
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-test -n "$target_alias" &&
- test "$program_prefix$program_suffix$program_transform_name" = \
- NONENONEs,x,x, &&
- program_prefix=${target_alias}-
-
- # Figure out the build and target systems. # Note that in autoconf terminology, "build" is obvious, but "target"
- # is confusing; it assumes you are cross-compiling a cross-compiler (!) and "target" is thus the target of the
- # product you're building. The target of this build is called "host". Since this is confusing to most people, we
- # have not adopted that system, but use "target" as the platform we are building for. In some places though we need
- # to use the configure naming style.
-
-
-
-
-
- # Copy the autoconf trip/quadruplet verbatim to OPENJDK_TARGET_AUTOCONF_NAME
- # (from the autoconf "host") and OPENJDK_BUILD_AUTOCONF_NAME
- # Note that we might later on rewrite e.g. OPENJDK_TARGET_CPU due to reduced build,
- # but this will not change the value of OPENJDK_TARGET_AUTOCONF_NAME.
- OPENJDK_TARGET_AUTOCONF_NAME="$host"
- OPENJDK_BUILD_AUTOCONF_NAME="$build"
-
-
-
- # Convert the autoconf OS/CPU value to our own data, into the VAR_OS/CPU variables.
-
- case "$build_os" in
- *linux*)
- VAR_OS=linux
- VAR_OS_TYPE=unix
- ;;
- *solaris*)
- VAR_OS=solaris
- VAR_OS_TYPE=unix
- ;;
- *darwin*)
- VAR_OS=macosx
- VAR_OS_TYPE=unix
- ;;
- *bsd*)
- VAR_OS=bsd
- VAR_OS_TYPE=unix
- ;;
- *cygwin*)
- VAR_OS=windows
- VAR_OS_ENV=windows.cygwin
- ;;
- *mingw*)
- VAR_OS=windows
- VAR_OS_ENV=windows.msys
- ;;
- *aix*)
- VAR_OS=aix
- VAR_OS_TYPE=unix
- ;;
- *)
- as_fn_error $? "unsupported operating system $build_os" "$LINENO" 5
- ;;
- esac
-
-
- # First argument is the cpu name from the trip/quad
- case "$build_cpu" in
- x86_64)
- VAR_CPU=x86_64
- VAR_CPU_ARCH=x86
- VAR_CPU_BITS=64
- VAR_CPU_ENDIAN=little
- ;;
- i?86)
- VAR_CPU=x86
- VAR_CPU_ARCH=x86
- VAR_CPU_BITS=32
- VAR_CPU_ENDIAN=little
- ;;
- alpha*)
- VAR_CPU=alpha
- VAR_CPU_ARCH=alpha
- VAR_CPU_BITS=64
- VAR_CPU_ENDIAN=little
- ;;
- arm*)
- VAR_CPU=arm
- VAR_CPU_ARCH=arm
- VAR_CPU_BITS=32
- VAR_CPU_ENDIAN=little
- ;;
- aarch64)
- VAR_CPU=aarch64
- VAR_CPU_ARCH=aarch64
- VAR_CPU_BITS=64
- VAR_CPU_ENDIAN=little
- ;;
- m68k)
- VAR_CPU=m68k
- VAR_CPU_ARCH=m68k
- VAR_CPU_BITS=32
- VAR_CPU_ENDIAN=big
- ;;
- mips)
- VAR_CPU=mips
- VAR_CPU_ARCH=mips
- VAR_CPU_BITS=32
- VAR_CPU_ENDIAN=big
- ;;
- mipsel)
- VAR_CPU=mipsel
- VAR_CPU_ARCH=mipsel
- VAR_CPU_BITS=32
- VAR_CPU_ENDIAN=little
- ;;
- mips64)
- VAR_CPU=mips64
- VAR_CPU_ARCH=mips64
- VAR_CPU_BITS=64
- VAR_CPU_ENDIAN=big
- ;;
- mips64el)
- VAR_CPU=mips64el
- VAR_CPU_ARCH=mips64el
- VAR_CPU_BITS=64
- VAR_CPU_ENDIAN=little
- ;;
- powerpc)
- VAR_CPU=ppc
- VAR_CPU_ARCH=ppc
- VAR_CPU_BITS=32
- VAR_CPU_ENDIAN=big
- ;;
- powerpc64)
- VAR_CPU=ppc64
- VAR_CPU_ARCH=ppc
- VAR_CPU_BITS=64
- VAR_CPU_ENDIAN=big
- ;;
- powerpc64le)
- VAR_CPU=ppc64le
- VAR_CPU_ARCH=ppc
- VAR_CPU_BITS=64
- VAR_CPU_ENDIAN=little
- ;;
- s390)
- VAR_CPU=s390
- VAR_CPU_ARCH=s390
- VAR_CPU_BITS=32
- VAR_CPU_ENDIAN=big
- ;;
- s390x)
- VAR_CPU=s390x
- VAR_CPU_ARCH=s390
- VAR_CPU_BITS=64
- VAR_CPU_ENDIAN=big
- ;;
- sh*eb)
- VAR_CPU=sh
- VAR_CPU_ARCH=sh
- VAR_CPU_BITS=32
- VAR_CPU_ENDIAN=big
- ;;
- sh*)
- VAR_CPU=sh
- VAR_CPU_ARCH=sh
- VAR_CPU_BITS=32
- VAR_CPU_ENDIAN=little
- ;;
- sparc)
- VAR_CPU=sparc
- VAR_CPU_ARCH=sparc
- VAR_CPU_BITS=32
- VAR_CPU_ENDIAN=big
- ;;
- sparcv9|sparc64)
- VAR_CPU=sparcv9
- VAR_CPU_ARCH=sparc
- VAR_CPU_BITS=64
- VAR_CPU_ENDIAN=big
- ;;
- *)
- as_fn_error $? "unsupported cpu $build_cpu" "$LINENO" 5
- ;;
- esac
-
- # ..and setup our own variables. (Do this explicitly to facilitate searching)
- OPENJDK_BUILD_OS="$VAR_OS"
- if test "x$VAR_OS_TYPE" != x; then
- OPENJDK_BUILD_OS_TYPE="$VAR_OS_TYPE"
- else
- OPENJDK_BUILD_OS_TYPE="$VAR_OS"
- fi
- if test "x$VAR_OS_ENV" != x; then
- OPENJDK_BUILD_OS_ENV="$VAR_OS_ENV"
- else
- OPENJDK_BUILD_OS_ENV="$VAR_OS"
- fi
- OPENJDK_BUILD_CPU="$VAR_CPU"
- OPENJDK_BUILD_CPU_ARCH="$VAR_CPU_ARCH"
- OPENJDK_BUILD_CPU_BITS="$VAR_CPU_BITS"
- OPENJDK_BUILD_CPU_ENDIAN="$VAR_CPU_ENDIAN"
-
-
-
-
-
-
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking openjdk-build os-cpu" >&5
-$as_echo_n "checking openjdk-build os-cpu... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OPENJDK_BUILD_OS-$OPENJDK_BUILD_CPU" >&5
-$as_echo "$OPENJDK_BUILD_OS-$OPENJDK_BUILD_CPU" >&6; }
-
- # Convert the autoconf OS/CPU value to our own data, into the VAR_OS/CPU variables.
-
- case "$host_os" in
- *linux*)
- VAR_OS=linux
- VAR_OS_TYPE=unix
- ;;
- *solaris*)
- VAR_OS=solaris
- VAR_OS_TYPE=unix
- ;;
- *darwin*)
- VAR_OS=macosx
- VAR_OS_TYPE=unix
- ;;
- *bsd*)
- VAR_OS=bsd
- VAR_OS_TYPE=unix
- ;;
- *cygwin*)
- VAR_OS=windows
- VAR_OS_ENV=windows.cygwin
- ;;
- *mingw*)
- VAR_OS=windows
- VAR_OS_ENV=windows.msys
- ;;
- *aix*)
- VAR_OS=aix
- VAR_OS_TYPE=unix
- ;;
- *)
- as_fn_error $? "unsupported operating system $host_os" "$LINENO" 5
- ;;
- esac
-
-
- # First argument is the cpu name from the trip/quad
- case "$host_cpu" in
- x86_64)
- VAR_CPU=x86_64
- VAR_CPU_ARCH=x86
- VAR_CPU_BITS=64
- VAR_CPU_ENDIAN=little
- ;;
- i?86)
- VAR_CPU=x86
- VAR_CPU_ARCH=x86
- VAR_CPU_BITS=32
- VAR_CPU_ENDIAN=little
- ;;
- alpha*)
- VAR_CPU=alpha
- VAR_CPU_ARCH=alpha
- VAR_CPU_BITS=64
- VAR_CPU_ENDIAN=little
- ;;
- arm*)
- VAR_CPU=arm
- VAR_CPU_ARCH=arm
- VAR_CPU_BITS=32
- VAR_CPU_ENDIAN=little
- ;;
- aarch64)
- VAR_CPU=aarch64
- VAR_CPU_ARCH=aarch64
- VAR_CPU_BITS=64
- VAR_CPU_ENDIAN=little
- ;;
- m68k)
- VAR_CPU=m68k
- VAR_CPU_ARCH=m68k
- VAR_CPU_BITS=32
- VAR_CPU_ENDIAN=big
- ;;
- mips)
- VAR_CPU=mips
- VAR_CPU_ARCH=mips
- VAR_CPU_BITS=32
- VAR_CPU_ENDIAN=big
- ;;
- mipsel)
- VAR_CPU=mipsel
- VAR_CPU_ARCH=mipsel
- VAR_CPU_BITS=32
- VAR_CPU_ENDIAN=little
- ;;
- mips64)
- VAR_CPU=mips64
- VAR_CPU_ARCH=mips64
- VAR_CPU_BITS=64
- VAR_CPU_ENDIAN=big
- ;;
- mips64el)
- VAR_CPU=mips64el
- VAR_CPU_ARCH=mips64el
- VAR_CPU_BITS=64
- VAR_CPU_ENDIAN=little
- ;;
- powerpc)
- VAR_CPU=ppc
- VAR_CPU_ARCH=ppc
- VAR_CPU_BITS=32
- VAR_CPU_ENDIAN=big
- ;;
- powerpc64)
- VAR_CPU=ppc64
- VAR_CPU_ARCH=ppc
- VAR_CPU_BITS=64
- VAR_CPU_ENDIAN=big
- ;;
- powerpc64le)
- VAR_CPU=ppc64le
- VAR_CPU_ARCH=ppc
- VAR_CPU_BITS=64
- VAR_CPU_ENDIAN=little
- ;;
- s390)
- VAR_CPU=s390
- VAR_CPU_ARCH=s390
- VAR_CPU_BITS=32
- VAR_CPU_ENDIAN=big
- ;;
- s390x)
- VAR_CPU=s390x
- VAR_CPU_ARCH=s390
- VAR_CPU_BITS=64
- VAR_CPU_ENDIAN=big
- ;;
- sh*eb)
- VAR_CPU=sh
- VAR_CPU_ARCH=sh
- VAR_CPU_BITS=32
- VAR_CPU_ENDIAN=big
- ;;
- sh*)
- VAR_CPU=sh
- VAR_CPU_ARCH=sh
- VAR_CPU_BITS=32
- VAR_CPU_ENDIAN=little
- ;;
- sparc)
- VAR_CPU=sparc
- VAR_CPU_ARCH=sparc
- VAR_CPU_BITS=32
- VAR_CPU_ENDIAN=big
- ;;
- sparcv9|sparc64)
- VAR_CPU=sparcv9
- VAR_CPU_ARCH=sparc
- VAR_CPU_BITS=64
- VAR_CPU_ENDIAN=big
- ;;
- *)
- as_fn_error $? "unsupported cpu $host_cpu" "$LINENO" 5
- ;;
- esac
-
- # ... and setup our own variables. (Do this explicitly to facilitate searching)
- OPENJDK_TARGET_OS="$VAR_OS"
- if test "x$VAR_OS_TYPE" != x; then
- OPENJDK_TARGET_OS_TYPE="$VAR_OS_TYPE"
- else
- OPENJDK_TARGET_OS_TYPE="$VAR_OS"
- fi
- if test "x$VAR_OS_ENV" != x; then
- OPENJDK_TARGET_OS_ENV="$VAR_OS_ENV"
- else
- OPENJDK_TARGET_OS_ENV="$VAR_OS"
- fi
- OPENJDK_TARGET_CPU="$VAR_CPU"
- OPENJDK_TARGET_CPU_ARCH="$VAR_CPU_ARCH"
- OPENJDK_TARGET_CPU_BITS="$VAR_CPU_BITS"
- OPENJDK_TARGET_CPU_ENDIAN="$VAR_CPU_ENDIAN"
-
-
-
-
-
-
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking openjdk-target os-cpu" >&5
-$as_echo_n "checking openjdk-target os-cpu... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OPENJDK_TARGET_OS-$OPENJDK_TARGET_CPU" >&5
-$as_echo "$OPENJDK_TARGET_OS-$OPENJDK_TARGET_CPU" >&6; }
-
-
-
-# Check whether --with-target-bits was given.
-if test "${with_target_bits+set}" = set; then :
- withval=$with_target_bits;
-fi
-
-
- # We have three types of compiles:
- # native == normal compilation, target system == build system
- # cross == traditional cross compilation, target system != build system; special toolchain needed
- # reduced == using native compilers, but with special flags (e.g. -m32) to produce 32-bit builds on 64-bit machines
- #
- if test "x$OPENJDK_BUILD_AUTOCONF_NAME" != "x$OPENJDK_TARGET_AUTOCONF_NAME"; then
- # We're doing a proper cross-compilation
- COMPILE_TYPE="cross"
- else
- COMPILE_TYPE="native"
- fi
-
- if test "x$with_target_bits" != x; then
- if test "x$COMPILE_TYPE" = "xcross"; then
- as_fn_error $? "It is not possible to combine --with-target-bits=X and proper cross-compilation. Choose either." "$LINENO" 5
- fi
-
- if test "x$with_target_bits" = x32 && test "x$OPENJDK_TARGET_CPU_BITS" = x64; then
- # A reduced build is requested
- COMPILE_TYPE="reduced"
- OPENJDK_TARGET_CPU_BITS=32
- if test "x$OPENJDK_TARGET_CPU_ARCH" = "xx86"; then
- OPENJDK_TARGET_CPU=x86
- elif test "x$OPENJDK_TARGET_CPU_ARCH" = "xsparc"; then
- OPENJDK_TARGET_CPU=sparc
- else
- as_fn_error $? "Reduced build (--with-target-bits=32) is only supported on x86_64 and sparcv9" "$LINENO" 5
- fi
- elif test "x$with_target_bits" = x64 && test "x$OPENJDK_TARGET_CPU_BITS" = x32; then
- as_fn_error $? "It is not possible to use --with-target-bits=64 on a 32 bit system. Use proper cross-compilation instead." "$LINENO" 5
- elif test "x$with_target_bits" = "x$OPENJDK_TARGET_CPU_BITS"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: --with-target-bits are set to build platform address size; argument has no meaning" >&5
-$as_echo "$as_me: --with-target-bits are set to build platform address size; argument has no meaning" >&6;}
- else
- as_fn_error $? "--with-target-bits can only be 32 or 64, you specified $with_target_bits!" "$LINENO" 5
- fi
- fi
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking compilation type" >&5
-$as_echo_n "checking compilation type... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $COMPILE_TYPE" >&5
-$as_echo "$COMPILE_TYPE" >&6; }
-
-
- if test "x$OPENJDK_TARGET_OS" = xmacosx; then
- OPENJDK_MODULE_TARGET_OS_NAME="macos"
- else
- OPENJDK_MODULE_TARGET_OS_NAME="$OPENJDK_TARGET_OS"
- fi
-
- if test "x$OPENJDK_TARGET_CPU" = xx86_64; then
- OPENJDK_MODULE_TARGET_OS_ARCH="amd64"
- else
- OPENJDK_MODULE_TARGET_OS_ARCH="$OPENJDK_TARGET_CPU"
- fi
-
- OPENJDK_MODULE_TARGET_PLATFORM="${OPENJDK_MODULE_TARGET_OS_NAME}-${OPENJDK_MODULE_TARGET_OS_ARCH}"
-
-
-
- if test "x$OPENJDK_TARGET_OS" = "xsolaris"; then
- RELEASE_FILE_OS_NAME=SunOS
- fi
- if test "x$OPENJDK_TARGET_OS" = "xlinux"; then
- RELEASE_FILE_OS_NAME=Linux
- fi
- if test "x$OPENJDK_TARGET_OS" = "xwindows"; then
- RELEASE_FILE_OS_NAME=Windows
- fi
- if test "x$OPENJDK_TARGET_OS" = xmacosx; then
- RELEASE_FILE_OS_NAME="Darwin"
- fi
- if test "x$OPENJDK_TARGET_OS" = "xaix"; then
- RELEASE_FILE_OS_NAME="AIX"
- fi
- RELEASE_FILE_OS_ARCH=${OPENJDK_TARGET_CPU}
-
-
-
-
-
-
- # Also store the legacy naming of the cpu.
- # Ie i586 and amd64 instead of x86 and x86_64
- OPENJDK_TARGET_CPU_LEGACY="$OPENJDK_TARGET_CPU"
- if test "x$OPENJDK_TARGET_CPU" = xx86; then
- OPENJDK_TARGET_CPU_LEGACY="i586"
- elif test "x$OPENJDK_TARGET_OS" != xmacosx && test "x$OPENJDK_TARGET_CPU" = xx86_64; then
- # On all platforms except MacOSX replace x86_64 with amd64.
- OPENJDK_TARGET_CPU_LEGACY="amd64"
- elif test "x$OPENJDK_TARGET_CPU" = xalpha; then
- # Avoid name collisions with variables named alpha
- OPENJDK_TARGET_CPU_LEGACY="_alpha_"
- elif test "x$OPENJDK_TARGET_CPU" = xsh; then
- # Avoid name collisions with variables named sh
- OPENJDK_TARGET_CPU_LEGACY="_sh_"
- fi
-
-
- # And the second legacy naming of the cpu.
- # Ie i386 and amd64 instead of x86 and x86_64.
- OPENJDK_TARGET_CPU_LEGACY_LIB="$OPENJDK_TARGET_CPU"
- if test "x$OPENJDK_TARGET_CPU" = xx86; then
- OPENJDK_TARGET_CPU_LEGACY_LIB="i386"
- elif test "x$OPENJDK_TARGET_CPU" = xx86_64; then
- OPENJDK_TARGET_CPU_LEGACY_LIB="amd64"
- fi
-
-
- # OPENJDK_TARGET_CPU_ISADIR is normally empty. On 64-bit Solaris systems, it is set to
- # /amd64 or /sparcv9. This string is appended to some library paths, like this:
- # /usr/lib${OPENJDK_TARGET_CPU_ISADIR}/libexample.so
- OPENJDK_TARGET_CPU_ISADIR=""
- if test "x$OPENJDK_TARGET_OS" = xsolaris; then
- if test "x$OPENJDK_TARGET_CPU" = xx86_64; then
- OPENJDK_TARGET_CPU_ISADIR="/amd64"
- elif test "x$OPENJDK_TARGET_CPU" = xsparcv9; then
- OPENJDK_TARGET_CPU_ISADIR="/sparcv9"
- fi
- fi
-
-
- # Setup OPENJDK_TARGET_CPU_OSARCH, which is used to set the os.arch Java system property
- OPENJDK_TARGET_CPU_OSARCH="$OPENJDK_TARGET_CPU"
- if test "x$OPENJDK_TARGET_OS" = xlinux && test "x$OPENJDK_TARGET_CPU" = xx86; then
- # On linux only, we replace x86 with i386.
- OPENJDK_TARGET_CPU_OSARCH="i386"
- elif test "x$OPENJDK_TARGET_OS" != xmacosx && test "x$OPENJDK_TARGET_CPU" = xx86_64; then
- # On all platforms except macosx, we replace x86_64 with amd64.
- OPENJDK_TARGET_CPU_OSARCH="amd64"
- fi
-
-
- OPENJDK_TARGET_CPU_JLI="$OPENJDK_TARGET_CPU"
- if test "x$OPENJDK_TARGET_CPU" = xx86; then
- OPENJDK_TARGET_CPU_JLI="i386"
- elif test "x$OPENJDK_TARGET_OS" != xmacosx && test "x$OPENJDK_TARGET_CPU" = xx86_64; then
- # On all platforms except macosx, we replace x86_64 with amd64.
- OPENJDK_TARGET_CPU_JLI="amd64"
- fi
-
- # The new version string in JDK 9 also defined new naming of OS and ARCH for bundles
- # Macosx is osx and x86_64 is x64
- if test "x$OPENJDK_TARGET_OS" = xmacosx; then
- OPENJDK_TARGET_OS_BUNDLE="osx"
- else
- OPENJDK_TARGET_OS_BUNDLE="$OPENJDK_TARGET_OS"
- fi
- if test "x$OPENJDK_TARGET_CPU" = xx86_64; then
- OPENJDK_TARGET_CPU_BUNDLE="x64"
- else
- OPENJDK_TARGET_CPU_BUNDLE="$OPENJDK_TARGET_CPU"
- fi
- OPENJDK_TARGET_BUNDLE_PLATFORM="${OPENJDK_TARGET_OS_BUNDLE}-${OPENJDK_TARGET_CPU_BUNDLE}"
-
-
- if test "x$OPENJDK_TARGET_CPU_BITS" = x64; then
- # -D_LP64=1 is only set on linux and mac. Setting on windows causes diff in
- # unpack200.exe. This variable is used in
- # FLAGS_SETUP_COMPILER_FLAGS_FOR_JDK_HELPER.
- if test "x$OPENJDK_TARGET_OS" = xlinux || test "x$OPENJDK_TARGET_OS" = xmacosx; then
- OPENJDK_TARGET_ADD_LP64="-D_LP64=1"
- fi
- fi
-
- if test "x$COMPILE_TYPE" = "xcross"; then
- # FIXME: ... or should this include reduced builds..?
- DEFINE_CROSS_COMPILE_ARCH="CROSS_COMPILE_ARCH:=$OPENJDK_TARGET_CPU_LEGACY"
- else
- DEFINE_CROSS_COMPILE_ARCH=""
- fi
-
-
- # Convert openjdk platform names to hotspot names
-
- HOTSPOT_TARGET_OS=${OPENJDK_TARGET_OS}
- if test "x$OPENJDK_TARGET_OS" = xmacosx; then
- HOTSPOT_TARGET_OS=bsd
- fi
-
-
- HOTSPOT_TARGET_OS_TYPE=${OPENJDK_TARGET_OS_TYPE}
- if test "x$OPENJDK_TARGET_OS_TYPE" = xunix; then
- HOTSPOT_TARGET_OS_TYPE=posix
- fi
-
-
- HOTSPOT_TARGET_CPU=${OPENJDK_TARGET_CPU}
- if test "x$OPENJDK_TARGET_CPU" = xx86; then
- HOTSPOT_TARGET_CPU=x86_32
- elif test "x$OPENJDK_TARGET_CPU" = xsparcv9; then
- HOTSPOT_TARGET_CPU=sparc
- elif test "x$OPENJDK_TARGET_CPU" = xppc64; then
- HOTSPOT_TARGET_CPU=ppc_64
- elif test "x$OPENJDK_TARGET_CPU" = xppc64le; then
- HOTSPOT_TARGET_CPU=ppc_64
- fi
-
-
- # This is identical with OPENJDK_*, but define anyway for consistency.
- HOTSPOT_TARGET_CPU_ARCH=${OPENJDK_TARGET_CPU_ARCH}
-
-
- # Setup HOTSPOT_TARGET_CPU_DEFINE
- if test "x$OPENJDK_TARGET_CPU" = xx86; then
- HOTSPOT_TARGET_CPU_DEFINE=IA32
- elif test "x$OPENJDK_TARGET_CPU" = xx86_64; then
- HOTSPOT_TARGET_CPU_DEFINE=AMD64
- elif test "x$OPENJDK_TARGET_CPU" = xsparcv9; then
- HOTSPOT_TARGET_CPU_DEFINE=SPARC
- elif test "x$OPENJDK_TARGET_CPU" = xaarch64; then
- HOTSPOT_TARGET_CPU_DEFINE=AARCH64
- elif test "x$OPENJDK_TARGET_CPU" = xppc64; then
- HOTSPOT_TARGET_CPU_DEFINE=PPC64
- elif test "x$OPENJDK_TARGET_CPU" = xppc64le; then
- HOTSPOT_TARGET_CPU_DEFINE=PPC64
-
- # The cpu defines below are for zero, we don't support them directly.
- elif test "x$OPENJDK_TARGET_CPU" = xsparc; then
- HOTSPOT_TARGET_CPU_DEFINE=SPARC
- elif test "x$OPENJDK_TARGET_CPU" = xppc; then
- HOTSPOT_TARGET_CPU_DEFINE=PPC32
- elif test "x$OPENJDK_TARGET_CPU" = xs390; then
- HOTSPOT_TARGET_CPU_DEFINE=S390
- elif test "x$OPENJDK_TARGET_CPU" = xs390x; then
- HOTSPOT_TARGET_CPU_DEFINE=S390
- elif test "x$OPENJDK_TARGET_CPU" != x; then
- HOTSPOT_TARGET_CPU_DEFINE=$(echo $OPENJDK_TARGET_CPU | tr a-z A-Z)
- fi
-
-
- # For historical reasons, the OS include directories have odd names.
- OPENJDK_TARGET_OS_INCLUDE_SUBDIR="$OPENJDK_TARGET_OS"
- if test "x$OPENJDK_TARGET_OS" = "xwindows"; then
- OPENJDK_TARGET_OS_INCLUDE_SUBDIR="win32"
- elif test "x$OPENJDK_TARGET_OS" = "xmacosx"; then
- OPENJDK_TARGET_OS_INCLUDE_SUBDIR="darwin"
- fi
-
-
-
- # Also store the legacy naming of the cpu.
- # Ie i586 and amd64 instead of x86 and x86_64
- OPENJDK_BUILD_CPU_LEGACY="$OPENJDK_BUILD_CPU"
- if test "x$OPENJDK_BUILD_CPU" = xx86; then
- OPENJDK_BUILD_CPU_LEGACY="i586"
- elif test "x$OPENJDK_BUILD_OS" != xmacosx && test "x$OPENJDK_BUILD_CPU" = xx86_64; then
- # On all platforms except MacOSX replace x86_64 with amd64.
- OPENJDK_BUILD_CPU_LEGACY="amd64"
- elif test "x$OPENJDK_BUILD_CPU" = xalpha; then
- # Avoid name collisions with variables named alpha
- OPENJDK_BUILD_CPU_LEGACY="_alpha_"
- elif test "x$OPENJDK_BUILD_CPU" = xsh; then
- # Avoid name collisions with variables named sh
- OPENJDK_BUILD_CPU_LEGACY="_sh_"
- fi
-
-
- # And the second legacy naming of the cpu.
- # Ie i386 and amd64 instead of x86 and x86_64.
- OPENJDK_BUILD_CPU_LEGACY_LIB="$OPENJDK_BUILD_CPU"
- if test "x$OPENJDK_BUILD_CPU" = xx86; then
- OPENJDK_BUILD_CPU_LEGACY_LIB="i386"
- elif test "x$OPENJDK_BUILD_CPU" = xx86_64; then
- OPENJDK_BUILD_CPU_LEGACY_LIB="amd64"
- fi
-
-
- # OPENJDK_BUILD_CPU_ISADIR is normally empty. On 64-bit Solaris systems, it is set to
- # /amd64 or /sparcv9. This string is appended to some library paths, like this:
- # /usr/lib${OPENJDK_BUILD_CPU_ISADIR}/libexample.so
- OPENJDK_BUILD_CPU_ISADIR=""
- if test "x$OPENJDK_BUILD_OS" = xsolaris; then
- if test "x$OPENJDK_BUILD_CPU" = xx86_64; then
- OPENJDK_BUILD_CPU_ISADIR="/amd64"
- elif test "x$OPENJDK_BUILD_CPU" = xsparcv9; then
- OPENJDK_BUILD_CPU_ISADIR="/sparcv9"
- fi
- fi
-
-
- # Setup OPENJDK_BUILD_CPU_OSARCH, which is used to set the os.arch Java system property
- OPENJDK_BUILD_CPU_OSARCH="$OPENJDK_BUILD_CPU"
- if test "x$OPENJDK_BUILD_OS" = xlinux && test "x$OPENJDK_BUILD_CPU" = xx86; then
- # On linux only, we replace x86 with i386.
- OPENJDK_BUILD_CPU_OSARCH="i386"
- elif test "x$OPENJDK_BUILD_OS" != xmacosx && test "x$OPENJDK_BUILD_CPU" = xx86_64; then
- # On all platforms except macosx, we replace x86_64 with amd64.
- OPENJDK_BUILD_CPU_OSARCH="amd64"
- fi
-
-
- OPENJDK_BUILD_CPU_JLI="$OPENJDK_BUILD_CPU"
- if test "x$OPENJDK_BUILD_CPU" = xx86; then
- OPENJDK_BUILD_CPU_JLI="i386"
- elif test "x$OPENJDK_BUILD_OS" != xmacosx && test "x$OPENJDK_BUILD_CPU" = xx86_64; then
- # On all platforms except macosx, we replace x86_64 with amd64.
- OPENJDK_BUILD_CPU_JLI="amd64"
- fi
-
- # The new version string in JDK 9 also defined new naming of OS and ARCH for bundles
- # Macosx is osx and x86_64 is x64
- if test "x$OPENJDK_BUILD_OS" = xmacosx; then
- OPENJDK_BUILD_OS_BUNDLE="osx"
- else
- OPENJDK_BUILD_OS_BUNDLE="$OPENJDK_TARGET_OS"
- fi
- if test "x$OPENJDK_BUILD_CPU" = xx86_64; then
- OPENJDK_BUILD_CPU_BUNDLE="x64"
- else
- OPENJDK_BUILD_CPU_BUNDLE="$OPENJDK_BUILD_CPU"
- fi
- OPENJDK_BUILD_BUNDLE_PLATFORM="${OPENJDK_BUILD_OS_BUNDLE}-${OPENJDK_BUILD_CPU_BUNDLE}"
-
-
- if test "x$OPENJDK_BUILD_CPU_BITS" = x64; then
- # -D_LP64=1 is only set on linux and mac. Setting on windows causes diff in
- # unpack200.exe. This variable is used in
- # FLAGS_SETUP_COMPILER_FLAGS_FOR_JDK_HELPER.
- if test "x$OPENJDK_BUILD_OS" = xlinux || test "x$OPENJDK_BUILD_OS" = xmacosx; then
- OPENJDK_BUILD_ADD_LP64="-D_LP64=1"
- fi
- fi
-
- if test "x$COMPILE_TYPE" = "xcross"; then
- # FIXME: ... or should this include reduced builds..?
- DEFINE_CROSS_COMPILE_ARCH="CROSS_COMPILE_ARCH:=$OPENJDK_BUILD_CPU_LEGACY"
- else
- DEFINE_CROSS_COMPILE_ARCH=""
- fi
-
-
- # Convert openjdk platform names to hotspot names
-
- HOTSPOT_BUILD_OS=${OPENJDK_BUILD_OS}
- if test "x$OPENJDK_BUILD_OS" = xmacosx; then
- HOTSPOT_BUILD_OS=bsd
- fi
-
-
- HOTSPOT_BUILD_OS_TYPE=${OPENJDK_BUILD_OS_TYPE}
- if test "x$OPENJDK_BUILD_OS_TYPE" = xunix; then
- HOTSPOT_BUILD_OS_TYPE=posix
- fi
-
-
- HOTSPOT_BUILD_CPU=${OPENJDK_BUILD_CPU}
- if test "x$OPENJDK_BUILD_CPU" = xx86; then
- HOTSPOT_BUILD_CPU=x86_32
- elif test "x$OPENJDK_BUILD_CPU" = xsparcv9; then
- HOTSPOT_BUILD_CPU=sparc
- elif test "x$OPENJDK_BUILD_CPU" = xppc64; then
- HOTSPOT_BUILD_CPU=ppc_64
- elif test "x$OPENJDK_BUILD_CPU" = xppc64le; then
- HOTSPOT_BUILD_CPU=ppc_64
- fi
-
-
- # This is identical with OPENJDK_*, but define anyway for consistency.
- HOTSPOT_BUILD_CPU_ARCH=${OPENJDK_BUILD_CPU_ARCH}
-
-
- # Setup HOTSPOT_BUILD_CPU_DEFINE
- if test "x$OPENJDK_BUILD_CPU" = xx86; then
- HOTSPOT_BUILD_CPU_DEFINE=IA32
- elif test "x$OPENJDK_BUILD_CPU" = xx86_64; then
- HOTSPOT_BUILD_CPU_DEFINE=AMD64
- elif test "x$OPENJDK_BUILD_CPU" = xsparcv9; then
- HOTSPOT_BUILD_CPU_DEFINE=SPARC
- elif test "x$OPENJDK_BUILD_CPU" = xaarch64; then
- HOTSPOT_BUILD_CPU_DEFINE=AARCH64
- elif test "x$OPENJDK_BUILD_CPU" = xppc64; then
- HOTSPOT_BUILD_CPU_DEFINE=PPC64
- elif test "x$OPENJDK_BUILD_CPU" = xppc64le; then
- HOTSPOT_BUILD_CPU_DEFINE=PPC64
-
- # The cpu defines below are for zero, we don't support them directly.
- elif test "x$OPENJDK_BUILD_CPU" = xsparc; then
- HOTSPOT_BUILD_CPU_DEFINE=SPARC
- elif test "x$OPENJDK_BUILD_CPU" = xppc; then
- HOTSPOT_BUILD_CPU_DEFINE=PPC32
- elif test "x$OPENJDK_BUILD_CPU" = xs390; then
- HOTSPOT_BUILD_CPU_DEFINE=S390
- elif test "x$OPENJDK_BUILD_CPU" = xs390x; then
- HOTSPOT_BUILD_CPU_DEFINE=S390
- elif test "x$OPENJDK_BUILD_CPU" != x; then
- HOTSPOT_BUILD_CPU_DEFINE=$(echo $OPENJDK_BUILD_CPU | tr a-z A-Z)
- fi
-
-
- # For historical reasons, the OS include directories have odd names.
- OPENJDK_BUILD_OS_INCLUDE_SUBDIR="$OPENJDK_TARGET_OS"
- if test "x$OPENJDK_TARGET_OS" = "xwindows"; then
- OPENJDK_BUILD_OS_INCLUDE_SUBDIR="win32"
- elif test "x$OPENJDK_TARGET_OS" = "xmacosx"; then
- OPENJDK_BUILD_OS_INCLUDE_SUBDIR="darwin"
- fi
-
-
-
-
-
-# Continue setting up basic stuff. Most remaining code require fundamental tools.
-
- # Save the current directory this script was started from
- CURDIR="$PWD"
-
- # We might need to rewrite ORIGINAL_PATH, if it includes "#", to quote them
- # for make. We couldn't do this when we retrieved ORIGINAL_PATH, since SED
- # was not available at that time.
- REWRITTEN_PATH=`$ECHO "$ORIGINAL_PATH" | $SED -e 's/#/\\\\#/g'`
- if test "x$REWRITTEN_PATH" != "x$ORIGINAL_PATH"; then
- ORIGINAL_PATH="$REWRITTEN_PATH"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting ORIGINAL_PATH to $REWRITTEN_PATH" >&5
-$as_echo "$as_me: Rewriting ORIGINAL_PATH to $REWRITTEN_PATH" >&6;}
- fi
-
- if test "x$OPENJDK_TARGET_OS" = "xwindows"; then
- PATH_SEP=";"
-
- SRC_ROOT_LENGTH=`$THEPWDCMD -L|$WC -m`
- if test $SRC_ROOT_LENGTH -gt 100; then
- as_fn_error $? "Your base path is too long. It is $SRC_ROOT_LENGTH characters long, but only 100 is supported" "$LINENO" 5
- fi
-
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking cygwin release" >&5
-$as_echo_n "checking cygwin release... " >&6; }
- CYGWIN_VERSION=`$UNAME -r`
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CYGWIN_VERSION" >&5
-$as_echo "$CYGWIN_VERSION" >&6; }
- WINDOWS_ENV_VENDOR='cygwin'
- WINDOWS_ENV_VERSION="$CYGWIN_VERSION"
-
- CYGWIN_VERSION_OLD=`$ECHO $CYGWIN_VERSION | $GREP -e '^1\.0-6'`
- if test "x$CYGWIN_VERSION_OLD" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Your cygwin is too old. You are running $CYGWIN_VERSION, but at least cygwin 1.7 is required. Please upgrade." >&5
-$as_echo "$as_me: Your cygwin is too old. You are running $CYGWIN_VERSION, but at least cygwin 1.7 is required. Please upgrade." >&6;}
- as_fn_error $? "Cannot continue" "$LINENO" 5
- fi
- if test "x$CYGPATH" = x; then
- as_fn_error $? "Something is wrong with your cygwin installation since I cannot find cygpath.exe in your path" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking cygwin root directory as unix-style path" >&5
-$as_echo_n "checking cygwin root directory as unix-style path... " >&6; }
- # The cmd output ends with Windows line endings (CR/LF)
- cygwin_winpath_root=`cd / ; cmd /c cd | $TR -d '\r\n'`
- # Force cygpath to report the proper root by including a trailing space, and then stripping it off again.
- CYGWIN_ROOT_PATH=`$CYGPATH -u "$cygwin_winpath_root " | $CUT -f 1 -d " "`
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CYGWIN_ROOT_PATH" >&5
-$as_echo "$CYGWIN_ROOT_PATH" >&6; }
- WINDOWS_ENV_ROOT_PATH="$CYGWIN_ROOT_PATH"
- test_cygdrive_prefix=`$ECHO $CYGWIN_ROOT_PATH | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- as_fn_error $? "Your cygdrive prefix is not /cygdrive. This is currently not supported. Change with mount -c." "$LINENO" 5
- fi
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking msys release" >&5
-$as_echo_n "checking msys release... " >&6; }
- MSYS_VERSION=`$UNAME -r`
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSYS_VERSION" >&5
-$as_echo "$MSYS_VERSION" >&6; }
-
- WINDOWS_ENV_VENDOR='msys'
- WINDOWS_ENV_VERSION="$MSYS_VERSION"
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking msys root directory as unix-style path" >&5
-$as_echo_n "checking msys root directory as unix-style path... " >&6; }
- # The cmd output ends with Windows line endings (CR/LF), the grep command will strip that away
- MSYS_ROOT_PATH=`cd / ; cmd /c cd | $GREP ".*"`
-
- windows_path="$MSYS_ROOT_PATH"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- MSYS_ROOT_PATH="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- MSYS_ROOT_PATH="$unix_path"
- fi
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSYS_ROOT_PATH" >&5
-$as_echo "$MSYS_ROOT_PATH" >&6; }
- WINDOWS_ENV_ROOT_PATH="$MSYS_ROOT_PATH"
- else
- as_fn_error $? "Unknown Windows environment. Neither cygwin nor msys was detected." "$LINENO" 5
- fi
-
- # Test if windows or unix (cygwin/msys) find is first in path.
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking what kind of 'find' is first on the PATH" >&5
-$as_echo_n "checking what kind of 'find' is first on the PATH... " >&6; }
- FIND_BINARY_OUTPUT=`find --version 2>&1`
- if test "x`echo $FIND_BINARY_OUTPUT | $GREP GNU`" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: unix style" >&5
-$as_echo "unix style" >&6; }
- elif test "x`echo $FIND_BINARY_OUTPUT | $GREP FIND`" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: Windows" >&5
-$as_echo "Windows" >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: Your path contains Windows tools (C:\Windows\system32) before your unix (cygwin or msys) tools." >&5
-$as_echo "$as_me: Your path contains Windows tools (C:\Windows\system32) before your unix (cygwin or msys) tools." >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: This will not work. Please correct and make sure /usr/bin (or similar) is first in path." >&5
-$as_echo "$as_me: This will not work. Please correct and make sure /usr/bin (or similar) is first in path." >&6;}
- as_fn_error $? "Cannot continue" "$LINENO" 5
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: unknown" >&5
-$as_echo "unknown" >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: It seems that your find utility is non-standard." >&5
-$as_echo "$as_me: WARNING: It seems that your find utility is non-standard." >&2;}
- fi
-
- else
- PATH_SEP=":"
- fi
-
-
- # We get the top-level directory from the supporting wrappers.
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for top-level directory" >&5
-$as_echo_n "checking for top-level directory... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $TOPDIR" >&5
-$as_echo "$TOPDIR" >&6; }
-
-
- # We can only call BASIC_FIXUP_PATH after BASIC_CHECK_PATHS_WINDOWS.
-
- # Only process if variable expands to non-empty
-
- if test "x$CURDIR" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- path="$CURDIR"
- new_path=`$CYGPATH -u "$path"`
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file precense.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of CURDIR, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of CURDIR, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Cannot locate the the path of CURDIR" "$LINENO" 5
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
-
- if test "x$path" != "x$new_path"; then
- CURDIR="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting CURDIR to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting CURDIR to \"$new_path\"" >&6;}
- fi
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- path="$CURDIR"
- has_colon=`$ECHO $path | $GREP ^.:`
- new_path="$path"
- if test "x$has_colon" = x; then
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $path`
- fi
-
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- if test "x$path" != "x$new_path"; then
- CURDIR="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting CURDIR to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting CURDIR to \"$new_path\"" >&6;}
- fi
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
-
- else
- # We're on a unix platform. Hooray! :)
- path="$CURDIR"
- has_space=`$ECHO "$path" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of CURDIR, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of CURDIR, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
- fi
-
- # Use eval to expand a potential ~
- eval path="$path"
- if test ! -f "$path" && test ! -d "$path"; then
- as_fn_error $? "The path of CURDIR, which resolves as \"$path\", is not found." "$LINENO" 5
- fi
-
- if test -d "$path"; then
- CURDIR="`cd "$path"; $THEPWDCMD -L`"
- else
- dir="`$DIRNAME "$path"`"
- base="`$BASENAME "$path"`"
- CURDIR="`cd "$dir"; $THEPWDCMD -L`/$base"
- fi
- fi
- fi
-
-
- # Only process if variable expands to non-empty
-
- if test "x$TOPDIR" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- path="$TOPDIR"
- new_path=`$CYGPATH -u "$path"`
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file precense.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of TOPDIR, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of TOPDIR, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Cannot locate the the path of TOPDIR" "$LINENO" 5
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
-
- if test "x$path" != "x$new_path"; then
- TOPDIR="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting TOPDIR to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting TOPDIR to \"$new_path\"" >&6;}
- fi
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- path="$TOPDIR"
- has_colon=`$ECHO $path | $GREP ^.:`
- new_path="$path"
- if test "x$has_colon" = x; then
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $path`
- fi
-
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- if test "x$path" != "x$new_path"; then
- TOPDIR="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting TOPDIR to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting TOPDIR to \"$new_path\"" >&6;}
- fi
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
-
- else
- # We're on a unix platform. Hooray! :)
- path="$TOPDIR"
- has_space=`$ECHO "$path" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of TOPDIR, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of TOPDIR, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
- fi
-
- # Use eval to expand a potential ~
- eval path="$path"
- if test ! -f "$path" && test ! -d "$path"; then
- as_fn_error $? "The path of TOPDIR, which resolves as \"$path\", is not found." "$LINENO" 5
- fi
-
- if test -d "$path"; then
- TOPDIR="`cd "$path"; $THEPWDCMD -L`"
- else
- dir="`$DIRNAME "$path"`"
- base="`$BASENAME "$path"`"
- TOPDIR="`cd "$dir"; $THEPWDCMD -L`/$base"
- fi
- fi
- fi
-
-
- # Locate the directory of this script.
- AUTOCONF_DIR=$TOPDIR/make/autoconf
-
- # Setup username (for use in adhoc version strings etc)
- # Outer [ ] to quote m4.
- USERNAME=`$ECHO "$USER" | $TR -d -c '[a-z][A-Z][0-9]'`
-
-
-
-# Check if it's a pure open build or if custom sources are to be used.
-
- # Check whether --enable-openjdk-only was given.
-if test "${enable_openjdk_only+set}" = set; then :
- enableval=$enable_openjdk_only;
-else
- enable_openjdk_only="no"
-fi
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if custom source is suppressed (openjdk-only)" >&5
-$as_echo_n "checking if custom source is suppressed (openjdk-only)... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_openjdk_only" >&5
-$as_echo "$enable_openjdk_only" >&6; }
- if test "x$enable_openjdk_only" = "xyes"; then
- SUPPRESS_CUSTOM_EXTENSIONS="true"
- elif test "x$enable_openjdk_only" = "xno"; then
- SUPPRESS_CUSTOM_EXTENSIONS="false"
- else
- as_fn_error $? "Invalid value for --enable-openjdk-only: $enable_openjdk_only" "$LINENO" 5
- fi
-
- # custom-make-dir is deprecated. Please use your custom-hook.m4 to override
- # the IncludeCustomExtension macro.
-
-
-# Check whether --with-custom-make-dir was given.
-if test "${with_custom_make_dir+set}" = set; then :
- withval=$with_custom_make_dir; { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Option --with-custom-make-dir is deprecated and will be ignored." >&5
-$as_echo "$as_me: WARNING: Option --with-custom-make-dir is deprecated and will be ignored." >&2;}
-fi
-
-
-
-
-# These are needed to be able to create a configuration name (and thus the output directory)
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking which variant of the JDK to build" >&5
-$as_echo_n "checking which variant of the JDK to build... " >&6; }
-
-# Check whether --with-jdk-variant was given.
-if test "${with_jdk_variant+set}" = set; then :
- withval=$with_jdk_variant;
-fi
-
-
- if test "x$with_jdk_variant" = xnormal || test "x$with_jdk_variant" = x; then
- JDK_VARIANT="normal"
- else
- as_fn_error $? "The available JDK variants are: normal" "$LINENO" 5
- fi
-
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $JDK_VARIANT" >&5
-$as_echo "$JDK_VARIANT" >&6; }
-
-
- DEBUG_LEVEL="release"
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking which debug level to use" >&5
-$as_echo_n "checking which debug level to use... " >&6; }
- # Check whether --enable-debug was given.
-if test "${enable_debug+set}" = set; then :
- enableval=$enable_debug;
- ENABLE_DEBUG="${enableval}"
- DEBUG_LEVEL="fastdebug"
-
-else
- ENABLE_DEBUG="no"
-fi
-
-
-
-# Check whether --with-debug-level was given.
-if test "${with_debug_level+set}" = set; then :
- withval=$with_debug_level;
- DEBUG_LEVEL="${withval}"
- if test "x$ENABLE_DEBUG" = xyes; then
- as_fn_error $? "You cannot use both --enable-debug and --with-debug-level at the same time." "$LINENO" 5
- fi
-
-fi
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DEBUG_LEVEL" >&5
-$as_echo "$DEBUG_LEVEL" >&6; }
-
- if test "x$DEBUG_LEVEL" != xrelease && \
- test "x$DEBUG_LEVEL" != xoptimized && \
- test "x$DEBUG_LEVEL" != xfastdebug && \
- test "x$DEBUG_LEVEL" != xslowdebug; then
- as_fn_error $? "Allowed debug levels are: release, fastdebug, slowdebug and optimized" "$LINENO" 5
- fi
-
- # Translate DEBUG_LEVEL to debug level used by Hotspot
- HOTSPOT_DEBUG_LEVEL="$DEBUG_LEVEL"
- if test "x$DEBUG_LEVEL" = xrelease; then
- HOTSPOT_DEBUG_LEVEL="product"
- elif test "x$DEBUG_LEVEL" = xslowdebug; then
- HOTSPOT_DEBUG_LEVEL="debug"
- fi
-
- if test "x$DEBUG_LEVEL" = xoptimized; then
- # The debug level 'optimized' is a little special because it is currently only
- # applicable to the HotSpot build where it means to build a completely
- # optimized version of the VM without any debugging code (like for the
- # 'release' debug level which is called 'product' in the HotSpot build) but
- # with the exception that it can contain additional code which is otherwise
- # protected by '#ifndef PRODUCT' macros. These 'optimized' builds are used to
- # test new and/or experimental features which are not intended for customer
- # shipment. Because these new features need to be tested and benchmarked in
- # real world scenarios, we want to build the containing JDK at the 'release'
- # debug level.
- DEBUG_LEVEL="release"
- fi
-
-
-
-
-
-
-# Check whether --with-jvm-variants was given.
-if test "${with_jvm_variants+set}" = set; then :
- withval=$with_jvm_variants;
-fi
-
-
-
-
-# Check whether --with-cpu-port was given.
-if test "${with_cpu_port+set}" = set; then :
- withval=$with_cpu_port;
-fi
-
-
- if test "x$with_cpu_port" != x; then
- if test "x$OPENJDK_TARGET_CPU" != xaarch64; then
- as_fn_error $? "--with-cpu-port only available on aarch64" "$LINENO" 5
- fi
- if test "x$with_cpu_port" != xarm64 && \
- test "x$with_cpu_port" != xaarch64; then
- as_fn_error $? "--with-cpu-port must specify arm64 or aarch64" "$LINENO" 5
- fi
- HOTSPOT_TARGET_CPU_PORT="$with_cpu_port"
- fi
-
-
- if test "x$with_jvm_variants" = x; then
- with_jvm_variants="server"
- fi
- JVM_VARIANTS_OPT="$with_jvm_variants"
-
- # Has the user listed more than one variant?
- # Additional [] needed to keep m4 from mangling shell constructs.
- if [[ "$JVM_VARIANTS_OPT" =~ "," ]] ; then
- BUILDING_MULTIPLE_JVM_VARIANTS=true
- else
- BUILDING_MULTIPLE_JVM_VARIANTS=false
- fi
- # Replace the commas with AND for use in the build directory name.
- JVM_VARIANTS_WITH_AND=`$ECHO "$JVM_VARIANTS_OPT" | $SED -e 's/,/AND/g'`
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking which variants of the JVM to build" >&5
-$as_echo_n "checking which variants of the JVM to build... " >&6; }
- # JVM_VARIANTS is a space-separated list.
- # Also use minimal, not minimal1 (which is kept for backwards compatibility).
- JVM_VARIANTS=`$ECHO $JVM_VARIANTS_OPT | $SED -e 's/,/ /g' -e 's/minimal1/minimal/'`
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $JVM_VARIANTS" >&5
-$as_echo "$JVM_VARIANTS" >&6; }
-
- # Check that the selected variants are valid
-
- # grep filter function inspired by a comment to http://stackoverflow.com/a/1617326
- # Notice that the original variant failes on SLES 10 and 11
- NEEDLE=${VALID_JVM_VARIANTS// /$'\n'}
- STACK=${JVM_VARIANTS// /$'\n'}
- INVALID_VARIANTS=`$GREP -Fvx "${NEEDLE}" <<< "${STACK}"`
- if test "x$INVALID_VARIANTS" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Unknown variant(s) specified: $INVALID_VARIANTS" >&5
-$as_echo "$as_me: Unknown variant(s) specified: $INVALID_VARIANTS" >&6;}
- as_fn_error $? "The available JVM variants are: $VALID_JVM_VARIANTS" "$LINENO" 5
- fi
-
- # All "special" variants share the same output directory ("server")
- VALID_MULTIPLE_JVM_VARIANTS="server client minimal"
- NEEDLE=${VALID_MULTIPLE_JVM_VARIANTS// /$'\n'}
- STACK=${JVM_VARIANTS// /$'\n'}
- INVALID_MULTIPLE_VARIANTS=`$GREP -Fvx "${NEEDLE}" <<< "${STACK}"`
- if test "x$INVALID_MULTIPLE_VARIANTS" != x && test "x$BUILDING_MULTIPLE_JVM_VARIANTS" = xtrue; then
- as_fn_error $? "You cannot build multiple variants with anything else than $VALID_MULTIPLE_JVM_VARIANTS." "$LINENO" 5
- fi
-
- # The "main" variant is the one used by other libs to link against during the
- # build.
- if test "x$BUILDING_MULTIPLE_JVM_VARIANTS" = "xtrue"; then
- MAIN_VARIANT_PRIO_ORDER="server client minimal"
- for variant in $MAIN_VARIANT_PRIO_ORDER; do
- if [[ " $JVM_VARIANTS " =~ " $variant " ]] ; then
- JVM_VARIANT_MAIN="$variant"
- break
- fi
- done
- else
- JVM_VARIANT_MAIN="$JVM_VARIANTS"
- fi
-
-
-
-
-
- if [[ " $JVM_VARIANTS " =~ " zero " ]] ; then
- # zero behaves as a platform and rewrites these values. This is really weird. :(
- # We are guaranteed that we do not build any other variants when building zero.
- HOTSPOT_TARGET_CPU=zero
- HOTSPOT_TARGET_CPU_ARCH=zero
- fi
-
-
-# With basic setup done, call the custom early hook.
-
-
-# Check if we have devkits, extra paths or sysroot set.
-
-
-# Check whether --with-devkit was given.
-if test "${with_devkit+set}" = set; then :
- withval=$with_devkit;
-
- # Only process if variable expands to non-empty
-
- if test "x$with_devkit" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- path="$with_devkit"
- new_path=`$CYGPATH -u "$path"`
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file precense.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of with_devkit, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of with_devkit, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Cannot locate the the path of with_devkit" "$LINENO" 5
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
-
- if test "x$path" != "x$new_path"; then
- with_devkit="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting with_devkit to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting with_devkit to \"$new_path\"" >&6;}
- fi
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- path="$with_devkit"
- has_colon=`$ECHO $path | $GREP ^.:`
- new_path="$path"
- if test "x$has_colon" = x; then
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $path`
- fi
-
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- if test "x$path" != "x$new_path"; then
- with_devkit="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting with_devkit to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting with_devkit to \"$new_path\"" >&6;}
- fi
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
-
- else
- # We're on a unix platform. Hooray! :)
- path="$with_devkit"
- has_space=`$ECHO "$path" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of with_devkit, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of with_devkit, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
- fi
-
- # Use eval to expand a potential ~
- eval path="$path"
- if test ! -f "$path" && test ! -d "$path"; then
- as_fn_error $? "The path of with_devkit, which resolves as \"$path\", is not found." "$LINENO" 5
- fi
-
- if test -d "$path"; then
- with_devkit="`cd "$path"; $THEPWDCMD -L`"
- else
- dir="`$DIRNAME "$path"`"
- base="`$BASENAME "$path"`"
- with_devkit="`cd "$dir"; $THEPWDCMD -L`/$base"
- fi
- fi
- fi
-
- DEVKIT_ROOT="$with_devkit"
- # Check for a meta data info file in the root of the devkit
- if test -f "$DEVKIT_ROOT/devkit.info"; then
- . $DEVKIT_ROOT/devkit.info
- # This potentially sets the following:
- # A descriptive name of the devkit
-
- if test "x$DEVKIT_NAME" = x; then
- eval DEVKIT_NAME="\${DEVKIT_NAME_${OPENJDK_TARGET_CPU}}"
- fi
-
- # Corresponds to --with-extra-path
-
- if test "x$DEVKIT_EXTRA_PATH" = x; then
- eval DEVKIT_EXTRA_PATH="\${DEVKIT_EXTRA_PATH_${OPENJDK_TARGET_CPU}}"
- fi
-
- # Corresponds to --with-toolchain-path
-
- if test "x$DEVKIT_TOOLCHAIN_PATH" = x; then
- eval DEVKIT_TOOLCHAIN_PATH="\${DEVKIT_TOOLCHAIN_PATH_${OPENJDK_TARGET_CPU}}"
- fi
-
- # Corresponds to --with-sysroot
-
- if test "x$DEVKIT_SYSROOT" = x; then
- eval DEVKIT_SYSROOT="\${DEVKIT_SYSROOT_${OPENJDK_TARGET_CPU}}"
- fi
-
-
- # Identifies the Visual Studio version in the devkit
-
- if test "x$DEVKIT_VS_VERSION" = x; then
- eval DEVKIT_VS_VERSION="\${DEVKIT_VS_VERSION_${OPENJDK_TARGET_CPU}}"
- fi
-
- # The Visual Studio include environment variable
-
- if test "x$DEVKIT_VS_INCLUDE" = x; then
- eval DEVKIT_VS_INCLUDE="\${DEVKIT_VS_INCLUDE_${OPENJDK_TARGET_CPU}}"
- fi
-
- # The Visual Studio lib environment variable
-
- if test "x$DEVKIT_VS_LIB" = x; then
- eval DEVKIT_VS_LIB="\${DEVKIT_VS_LIB_${OPENJDK_TARGET_CPU}}"
- fi
-
- # Corresponds to --with-msvcr-dll
-
- if test "x$DEVKIT_MSVCR_DLL" = x; then
- eval DEVKIT_MSVCR_DLL="\${DEVKIT_MSVCR_DLL_${OPENJDK_TARGET_CPU}}"
- fi
-
- # Corresponds to --with-msvcp-dll
-
- if test "x$DEVKIT_MSVCP_DLL" = x; then
- eval DEVKIT_MSVCP_DLL="\${DEVKIT_MSVCP_DLL_${OPENJDK_TARGET_CPU}}"
- fi
-
- fi
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for devkit" >&5
-$as_echo_n "checking for devkit... " >&6; }
- if test "x$DEVKIT_NAME" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DEVKIT_NAME in $DEVKIT_ROOT" >&5
-$as_echo "$DEVKIT_NAME in $DEVKIT_ROOT" >&6; }
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DEVKIT_ROOT" >&5
-$as_echo "$DEVKIT_ROOT" >&6; }
- fi
-
-
- if test "x$DEVKIT_EXTRA_PATH" != x; then
- if test "x$EXTRA_PATH" = x; then
- EXTRA_PATH="$DEVKIT_EXTRA_PATH"
- else
- EXTRA_PATH="$DEVKIT_EXTRA_PATH:$EXTRA_PATH"
- fi
- fi
-
-
- # Fallback default of just /bin if DEVKIT_PATH is not defined
- if test "x$DEVKIT_TOOLCHAIN_PATH" = x; then
- DEVKIT_TOOLCHAIN_PATH="$DEVKIT_ROOT/bin"
- fi
-
- if test "x$DEVKIT_TOOLCHAIN_PATH" != x; then
- if test "x$TOOLCHAIN_PATH" = x; then
- TOOLCHAIN_PATH="$DEVKIT_TOOLCHAIN_PATH"
- else
- TOOLCHAIN_PATH="$DEVKIT_TOOLCHAIN_PATH:$TOOLCHAIN_PATH"
- fi
- fi
-
-
- # If DEVKIT_SYSROOT is set, use that, otherwise try a couple of known
- # places for backwards compatiblity.
- if test "x$DEVKIT_SYSROOT" != x; then
- SYSROOT="$DEVKIT_SYSROOT"
- elif test -d "$DEVKIT_ROOT/$host_alias/libc"; then
- SYSROOT="$DEVKIT_ROOT/$host_alias/libc"
- elif test -d "$DEVKIT_ROOT/$host/sys-root"; then
- SYSROOT="$DEVKIT_ROOT/$host/sys-root"
- fi
-
- if test "x$DEVKIT_ROOT" != x; then
- DEVKIT_LIB_DIR="$DEVKIT_ROOT/lib"
- if test "x$OPENJDK_TARGET_CPU_BITS" = x64; then
- DEVKIT_LIB_DIR="$DEVKIT_ROOT/lib64"
- fi
-
- fi
-
-
-fi
-
-
- # You can force the sysroot if the sysroot encoded into the compiler tools
- # is not correct.
-
-# Check whether --with-sys-root was given.
-if test "${with_sys_root+set}" = set; then :
- withval=$with_sys_root; SYSROOT=$with_sys_root
-
-fi
-
-
-
-# Check whether --with-sysroot was given.
-if test "${with_sysroot+set}" = set; then :
- withval=$with_sysroot; SYSROOT=$with_sysroot
-
-fi
-
-
-
-# Check whether --with-tools-dir was given.
-if test "${with_tools_dir+set}" = set; then :
- withval=$with_tools_dir;
- if test "x$with_tools_dir" != x; then
- if test "x$TOOLCHAIN_PATH" = x; then
- TOOLCHAIN_PATH="$with_tools_dir"
- else
- TOOLCHAIN_PATH="$with_tools_dir:$TOOLCHAIN_PATH"
- fi
- fi
-
-
-fi
-
-
-
-# Check whether --with-toolchain-path was given.
-if test "${with_toolchain_path+set}" = set; then :
- withval=$with_toolchain_path;
- if test "x$with_toolchain_path" != x; then
- if test "x$TOOLCHAIN_PATH" = x; then
- TOOLCHAIN_PATH="$with_toolchain_path"
- else
- TOOLCHAIN_PATH="$with_toolchain_path:$TOOLCHAIN_PATH"
- fi
- fi
-
-
-fi
-
-
-
-# Check whether --with-extra-path was given.
-if test "${with_extra_path+set}" = set; then :
- withval=$with_extra_path;
- if test "x$with_extra_path" != x; then
- if test "x$EXTRA_PATH" = x; then
- EXTRA_PATH="$with_extra_path"
- else
- EXTRA_PATH="$with_extra_path:$EXTRA_PATH"
- fi
- fi
-
-
-fi
-
-
- if test "x$OPENJDK_BUILD_OS" = "xmacosx"; then
- # If a devkit has been supplied, find xcodebuild in the toolchain_path.
- # If not, detect if Xcode is installed by running xcodebuild -version
- # if no Xcode installed, xcodebuild exits with 1
- # if Xcode is installed, even if xcode-select is misconfigured, then it exits with 0
- if test "x$DEVKIT_ROOT" != x || /usr/bin/xcodebuild -version >/dev/null 2>&1; then
- # We need to use xcodebuild in the toolchain dir provided by the user, this will
- # fall back on the stub binary in /usr/bin/xcodebuild
- # Extract the first word of "xcodebuild", so it can be a program name with args.
-set dummy xcodebuild; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_XCODEBUILD+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $XCODEBUILD in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_XCODEBUILD="$XCODEBUILD" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $TOOLCHAIN_PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_XCODEBUILD="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- test -z "$ac_cv_path_XCODEBUILD" && ac_cv_path_XCODEBUILD="/usr/bin/xcodebuild"
- ;;
-esac
-fi
-XCODEBUILD=$ac_cv_path_XCODEBUILD
-if test -n "$XCODEBUILD"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $XCODEBUILD" >&5
-$as_echo "$XCODEBUILD" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- else
- # this should result in SYSROOT being empty, unless --with-sysroot is provided
- # when only the command line tools are installed there are no SDKs, so headers
- # are copied into the system frameworks
- XCODEBUILD=
-
- fi
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for sdk name" >&5
-$as_echo_n "checking for sdk name... " >&6; }
-
-# Check whether --with-sdk-name was given.
-if test "${with_sdk_name+set}" = set; then :
- withval=$with_sdk_name; SDKNAME=$with_sdk_name
-
-fi
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $SDKNAME" >&5
-$as_echo "$SDKNAME" >&6; }
-
- # if toolchain path is specified then don't rely on system headers, they may not compile
- HAVE_SYSTEM_FRAMEWORK_HEADERS=0
- test -z "$TOOLCHAIN_PATH" && \
- HAVE_SYSTEM_FRAMEWORK_HEADERS=`test ! -f /System/Library/Frameworks/Foundation.framework/Headers/Foundation.h; echo $?`
-
- if test -z "$SYSROOT"; then
- if test -n "$XCODEBUILD"; then
- # if we don't have system headers, use default SDK name (last resort)
- if test -z "$SDKNAME" -a $HAVE_SYSTEM_FRAMEWORK_HEADERS -eq 0; then
- SDKNAME=${SDKNAME:-macosx}
- fi
-
- if test -n "$SDKNAME"; then
- # Call xcodebuild to determine SYSROOT
- SYSROOT=`"$XCODEBUILD" -sdk $SDKNAME -version | $GREP '^Path: ' | $SED 's/Path: //'`
- fi
- else
- if test $HAVE_SYSTEM_FRAMEWORK_HEADERS -eq 0; then
- as_fn_error $? "No xcodebuild tool and no system framework headers found, use --with-sysroot or --with-sdk-name to provide a path to a valid SDK" "$LINENO" 5
- fi
- fi
- else
- # warn user if --with-sdk-name was also set
- if test -n "$with_sdk_name"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Both SYSROOT and --with-sdk-name are set, only SYSROOT will be used" >&5
-$as_echo "$as_me: WARNING: Both SYSROOT and --with-sdk-name are set, only SYSROOT will be used" >&2;}
- fi
- fi
-
- if test $HAVE_SYSTEM_FRAMEWORK_HEADERS -eq 0 -a -z "$SYSROOT"; then
- # If no system framework headers, then SYSROOT must be set, or we won't build
- as_fn_error $? "Unable to determine SYSROOT and no headers found in /System/Library/Frameworks. Check Xcode configuration, --with-sysroot or --with-sdk-name arguments." "$LINENO" 5
- fi
-
- # Perform a basic sanity test
- if test ! -f "$SYSROOT/System/Library/Frameworks/Foundation.framework/Headers/Foundation.h"; then
- if test -z "$SYSROOT"; then
- as_fn_error $? "Unable to find required framework headers, provide a path to an SDK via --with-sysroot or --with-sdk-name and be sure Xcode is installed properly" "$LINENO" 5
- else
- as_fn_error $? "Invalid SDK or SYSROOT path, dependent framework headers not found" "$LINENO" 5
- fi
- fi
-
- # set SDKROOT too, Xcode tools will pick it up
- SDKROOT="$SYSROOT"
-
- fi
-
- # Prepend the extra path to the global path
-
- if test "x$EXTRA_PATH" != x; then
- if test "x$PATH" = x; then
- PATH="$EXTRA_PATH"
- else
- PATH="$EXTRA_PATH:$PATH"
- fi
- fi
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5
-$as_echo_n "checking for sysroot... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $SYSROOT" >&5
-$as_echo "$SYSROOT" >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for toolchain path" >&5
-$as_echo_n "checking for toolchain path... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $TOOLCHAIN_PATH" >&5
-$as_echo "$TOOLCHAIN_PATH" >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for extra path" >&5
-$as_echo_n "checking for extra path... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $EXTRA_PATH" >&5
-$as_echo "$EXTRA_PATH" >&6; }
-
-
-# To properly create a configuration name, we need to have the OpenJDK target
-# and options (variants and debug level) parsed.
-
-
-
-# Check whether --with-conf-name was given.
-if test "${with_conf_name+set}" = set; then :
- withval=$with_conf_name; CONF_NAME=${with_conf_name}
-fi
-
-
- # Test from where we are running configure, in or outside of src root.
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking where to store configuration" >&5
-$as_echo_n "checking where to store configuration... " >&6; }
- if test "x$CURDIR" = "x$TOPDIR" || test "x$CURDIR" = "x$CUSTOM_ROOT" \
- || test "x$CURDIR" = "x$TOPDIR/make/autoconf" \
- || test "x$CURDIR" = "x$TOPDIR/make" ; then
- # We are running configure from the src root.
- # Create a default ./build/target-variant-debuglevel output root.
- if test "x${CONF_NAME}" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: in default location" >&5
-$as_echo "in default location" >&6; }
- CONF_NAME="${OPENJDK_TARGET_OS}-${OPENJDK_TARGET_CPU}-${JDK_VARIANT}-${JVM_VARIANTS_WITH_AND}-${DEBUG_LEVEL}"
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: in build directory with custom name" >&5
-$as_echo "in build directory with custom name" >&6; }
- fi
-
- if test "x$CUSTOM_ROOT" != x; then
- OUTPUTDIR="${CUSTOM_ROOT}/build/${CONF_NAME}"
- else
- OUTPUTDIR="${TOPDIR}/build/${CONF_NAME}"
- fi
- $MKDIR -p "$OUTPUTDIR"
- if test ! -d "$OUTPUTDIR"; then
- as_fn_error $? "Could not create build directory $OUTPUTDIR" "$LINENO" 5
- fi
- else
- # We are running configure from outside of the src dir.
- # Then use the current directory as output dir!
- # If configuration is situated in normal build directory, just use the build
- # directory name as configuration name, otherwise use the complete path.
- if test "x${CONF_NAME}" = x; then
- CONF_NAME=`$ECHO $CURDIR | $SED -e "s!^${TOPDIR}/build/!!"`
- fi
- OUTPUTDIR="$CURDIR"
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: in current directory" >&5
-$as_echo "in current directory" >&6; }
-
- # WARNING: This might be a bad thing to do. You need to be sure you want to
- # have a configuration in this directory. Do some sanity checks!
-
- if test ! -e "$OUTPUTDIR/spec.gmk"; then
- # If we have a spec.gmk, we have run here before and we are OK. Otherwise, check for
- # other files
- files_present=`$LS $OUTPUTDIR`
- # Configure has already touched config.log and confdefs.h in the current dir when this check
- # is performed.
- filtered_files=`$ECHO "$files_present" \
- | $SED -e 's/config.log//g' \
- -e 's/configure.log//g' \
- -e 's/confdefs.h//g' \
- -e 's/ //g' \
- | $TR -d '\n'`
- if test "x$filtered_files" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Current directory is $CURDIR." >&5
-$as_echo "$as_me: Current directory is $CURDIR." >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: Since this is not the source root, configure will output the configuration here" >&5
-$as_echo "$as_me: Since this is not the source root, configure will output the configuration here" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: (as opposed to creating a configuration in /build/)." >&5
-$as_echo "$as_me: (as opposed to creating a configuration in /build/)." >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: However, this directory is not empty. This is not allowed, since it could" >&5
-$as_echo "$as_me: However, this directory is not empty. This is not allowed, since it could" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: seriously mess up just about everything." >&5
-$as_echo "$as_me: seriously mess up just about everything." >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: Try 'cd $TOPDIR' and restart configure" >&5
-$as_echo "$as_me: Try 'cd $TOPDIR' and restart configure" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: (or create a new empty directory and cd to it)." >&5
-$as_echo "$as_me: (or create a new empty directory and cd to it)." >&6;}
- as_fn_error $? "Will not continue creating configuration in $CURDIR" "$LINENO" 5
- fi
- fi
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking what configuration name to use" >&5
-$as_echo_n "checking what configuration name to use... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CONF_NAME" >&5
-$as_echo "$CONF_NAME" >&6; }
-
-
- # Only process if variable expands to non-empty
-
- if test "x$OUTPUTDIR" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- path="$OUTPUTDIR"
- new_path=`$CYGPATH -u "$path"`
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file precense.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of OUTPUTDIR, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of OUTPUTDIR, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Cannot locate the the path of OUTPUTDIR" "$LINENO" 5
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
-
- if test "x$path" != "x$new_path"; then
- OUTPUTDIR="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting OUTPUTDIR to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting OUTPUTDIR to \"$new_path\"" >&6;}
- fi
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- path="$OUTPUTDIR"
- has_colon=`$ECHO $path | $GREP ^.:`
- new_path="$path"
- if test "x$has_colon" = x; then
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $path`
- fi
-
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- if test "x$path" != "x$new_path"; then
- OUTPUTDIR="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting OUTPUTDIR to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting OUTPUTDIR to \"$new_path\"" >&6;}
- fi
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
-
- else
- # We're on a unix platform. Hooray! :)
- path="$OUTPUTDIR"
- has_space=`$ECHO "$path" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of OUTPUTDIR, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of OUTPUTDIR, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
- fi
-
- # Use eval to expand a potential ~
- eval path="$path"
- if test ! -f "$path" && test ! -d "$path"; then
- as_fn_error $? "The path of OUTPUTDIR, which resolves as \"$path\", is not found." "$LINENO" 5
- fi
-
- if test -d "$path"; then
- OUTPUTDIR="`cd "$path"; $THEPWDCMD -L`"
- else
- dir="`$DIRNAME "$path"`"
- base="`$BASENAME "$path"`"
- OUTPUTDIR="`cd "$dir"; $THEPWDCMD -L`/$base"
- fi
- fi
- fi
-
-
- CONFIGURESUPPORT_OUTPUTDIR="$OUTPUTDIR/configure-support"
- $MKDIR -p "$CONFIGURESUPPORT_OUTPUTDIR"
-
- SPEC="$OUTPUTDIR/spec.gmk"
-
-
-
-
-
- # The spec.gmk file contains all variables for the make system.
- ac_config_files="$ac_config_files $OUTPUTDIR/spec.gmk:$AUTOCONF_DIR/spec.gmk.in"
-
- # The bootcycle-spec.gmk file contains support for boot cycle builds.
- ac_config_files="$ac_config_files $OUTPUTDIR/bootcycle-spec.gmk:$AUTOCONF_DIR/bootcycle-spec.gmk.in"
-
- # The buildjdk-spec.gmk file contains support for building a buildjdk when cross compiling.
- ac_config_files="$ac_config_files $OUTPUTDIR/buildjdk-spec.gmk:$AUTOCONF_DIR/buildjdk-spec.gmk.in"
-
- # The compare.sh is used to compare the build output to other builds.
- ac_config_files="$ac_config_files $OUTPUTDIR/compare.sh:$AUTOCONF_DIR/compare.sh.in"
-
- # The generated Makefile knows where the spec.gmk is and where the source is.
- # You can run make from the OUTPUTDIR, or from the top-level Makefile
- # which will look for generated configurations
- ac_config_files="$ac_config_files $OUTPUTDIR/Makefile:$AUTOCONF_DIR/Makefile.in"
-
-
-
-# Must be done before we can call HELP_MSG_MISSING_DEPENDENCY.
-
- for ac_prog in apt-get yum brew port pkgutil pkgadd
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_PKGHANDLER+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$PKGHANDLER"; then
- ac_cv_prog_PKGHANDLER="$PKGHANDLER" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_PKGHANDLER="$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-PKGHANDLER=$ac_cv_prog_PKGHANDLER
-if test -n "$PKGHANDLER"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PKGHANDLER" >&5
-$as_echo "$PKGHANDLER" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$PKGHANDLER" && break
-done
-
-
-
-# Setup tools that requires more complex handling, or that is not needed by the configure script.
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${MAKE+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
-
- # Try our hardest to locate a correct version of GNU make
- for ac_prog in gmake
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_CHECK_GMAKE+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $CHECK_GMAKE in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_CHECK_GMAKE="$CHECK_GMAKE" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_CHECK_GMAKE="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-CHECK_GMAKE=$ac_cv_path_CHECK_GMAKE
-if test -n "$CHECK_GMAKE"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CHECK_GMAKE" >&5
-$as_echo "$CHECK_GMAKE" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$CHECK_GMAKE" && break
-done
-
-
- MAKE_CANDIDATE=""$CHECK_GMAKE""
- DESCRIPTION="gmake in PATH"
-
- # On Cygwin, we require a newer version of make than on other platforms
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- MAKE_VERSION_EXPR="-e 4\."
- MAKE_REQUIRED_VERSION="4.0"
- else
- MAKE_VERSION_EXPR="-e 3\.8[12] -e 4\."
- MAKE_REQUIRED_VERSION="3.81"
- fi
-
- if test "x$MAKE_CANDIDATE" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Testing potential make at $MAKE_CANDIDATE, found using $DESCRIPTION" >&5
-$as_echo "$as_me: Testing potential make at $MAKE_CANDIDATE, found using $DESCRIPTION" >&6;}
- MAKE_VERSION_STRING=`$MAKE_CANDIDATE --version | $HEAD -n 1`
- IS_GNU_MAKE=`$ECHO $MAKE_VERSION_STRING | $GREP 'GNU Make'`
- if test "x$IS_GNU_MAKE" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found potential make at $MAKE_CANDIDATE, however, this is not GNU Make. Ignoring." >&5
-$as_echo "$as_me: Found potential make at $MAKE_CANDIDATE, however, this is not GNU Make. Ignoring." >&6;}
- else
- IS_MODERN_MAKE=`$ECHO $MAKE_VERSION_STRING | $GREP $MAKE_VERSION_EXPR`
- if test "x$IS_MODERN_MAKE" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found GNU make at $MAKE_CANDIDATE, however this is not version $MAKE_REQUIRED_VERSION or later. (it is: $MAKE_VERSION_STRING). Ignoring." >&5
-$as_echo "$as_me: Found GNU make at $MAKE_CANDIDATE, however this is not version $MAKE_REQUIRED_VERSION or later. (it is: $MAKE_VERSION_STRING). Ignoring." >&6;}
- else
- if test "x$OPENJDK_BUILD_OS" = "xwindows"; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- MAKE_EXPECTED_ENV='cygwin'
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- MAKE_EXPECTED_ENV='msys'
- else
- as_fn_error $? "Unknown Windows environment" "$LINENO" 5
- fi
- MAKE_BUILT_FOR=`$MAKE_CANDIDATE --version | $GREP -i 'built for'`
- IS_MAKE_CORRECT_ENV=`$ECHO $MAKE_BUILT_FOR | $GREP $MAKE_EXPECTED_ENV`
- else
- # Not relevant for non-Windows
- IS_MAKE_CORRECT_ENV=true
- fi
- if test "x$IS_MAKE_CORRECT_ENV" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found GNU make version $MAKE_VERSION_STRING at $MAKE_CANDIDATE, but it is not for $MAKE_EXPECTED_ENV (it says: $MAKE_BUILT_FOR). Ignoring." >&5
-$as_echo "$as_me: Found GNU make version $MAKE_VERSION_STRING at $MAKE_CANDIDATE, but it is not for $MAKE_EXPECTED_ENV (it says: $MAKE_BUILT_FOR). Ignoring." >&6;}
- else
- FOUND_MAKE=$MAKE_CANDIDATE
-
- # Only process if variable expands to non-empty
-
- if test "x$FOUND_MAKE" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$FOUND_MAKE"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path=`$CYGPATH -u "$path"`
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path=`$CYGPATH -u "$path"`
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of FOUND_MAKE" "$LINENO" 5
- fi
- fi
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file presence.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- # Short path failed, file does not exist as specified.
- # Try adding .exe or .cmd
- if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
- elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of FOUND_MAKE, which resolves as \"$new_path\", is invalid." >&5
-$as_echo "$as_me: The path of FOUND_MAKE, which resolves as \"$new_path\", is invalid." >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&5
-$as_echo "$as_me: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&6;}
- as_fn_error $? "Cannot locate the the path of FOUND_MAKE" "$LINENO" 5
- fi
- else
- input_to_shortpath="$new_path"
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
- new_path="$input_to_shortpath"
-
- input_path="$input_to_shortpath"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $input_to_shortpath | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$FOUND_MAKE"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
-
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in MSYS causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- fi
-
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of FOUND_MAKE" "$LINENO" 5
- fi
- fi
-
- # Now new_path has a complete unix path to the binary
- if test "x`$ECHO $new_path | $GREP ^/bin/`" != x; then
- # Keep paths in /bin as-is, but remove trailing .exe if any
- new_path="${new_path/%.exe/}"
- # Do not save /bin paths to all_fixpath_prefixes!
- else
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $new_path`
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
- # Output is in $new_path
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
- fi
-
- else
- # We're on a unix platform. Hooray! :)
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$FOUND_MAKE"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Cannot rely on the command "which" here since it doesn't always work.
- is_absolute_path=`$ECHO "$path" | $GREP ^/`
- if test -z "$is_absolute_path"; then
- # Path to executable is not absolute. Find it.
- IFS_save="$IFS"
- IFS=:
- for p in $PATH; do
- if test -f "$p/$path" && test -x "$p/$path"; then
- new_path="$p/$path"
- break
- fi
- done
- IFS="$IFS_save"
- else
- # This is an absolute path, we can use it without further modifications.
- new_path="$path"
- fi
-
- if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
-$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of FOUND_MAKE" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
-
- if test "x$complete" != "x$new_complete"; then
- FOUND_MAKE="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting FOUND_MAKE to \"$new_complete\"" >&5
-$as_echo "$as_me: Rewriting FOUND_MAKE to \"$new_complete\"" >&6;}
- fi
- fi
-
- fi
- fi
- fi
- fi
-
-
- if test "x$FOUND_MAKE" = x; then
- for ac_prog in make
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_CHECK_MAKE+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $CHECK_MAKE in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_CHECK_MAKE="$CHECK_MAKE" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_CHECK_MAKE="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-CHECK_MAKE=$ac_cv_path_CHECK_MAKE
-if test -n "$CHECK_MAKE"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CHECK_MAKE" >&5
-$as_echo "$CHECK_MAKE" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$CHECK_MAKE" && break
-done
-
-
- MAKE_CANDIDATE=""$CHECK_MAKE""
- DESCRIPTION="make in PATH"
-
- # On Cygwin, we require a newer version of make than on other platforms
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- MAKE_VERSION_EXPR="-e 4\."
- MAKE_REQUIRED_VERSION="4.0"
- else
- MAKE_VERSION_EXPR="-e 3\.8[12] -e 4\."
- MAKE_REQUIRED_VERSION="3.81"
- fi
-
- if test "x$MAKE_CANDIDATE" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Testing potential make at $MAKE_CANDIDATE, found using $DESCRIPTION" >&5
-$as_echo "$as_me: Testing potential make at $MAKE_CANDIDATE, found using $DESCRIPTION" >&6;}
- MAKE_VERSION_STRING=`$MAKE_CANDIDATE --version | $HEAD -n 1`
- IS_GNU_MAKE=`$ECHO $MAKE_VERSION_STRING | $GREP 'GNU Make'`
- if test "x$IS_GNU_MAKE" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found potential make at $MAKE_CANDIDATE, however, this is not GNU Make. Ignoring." >&5
-$as_echo "$as_me: Found potential make at $MAKE_CANDIDATE, however, this is not GNU Make. Ignoring." >&6;}
- else
- IS_MODERN_MAKE=`$ECHO $MAKE_VERSION_STRING | $GREP $MAKE_VERSION_EXPR`
- if test "x$IS_MODERN_MAKE" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found GNU make at $MAKE_CANDIDATE, however this is not version $MAKE_REQUIRED_VERSION or later. (it is: $MAKE_VERSION_STRING). Ignoring." >&5
-$as_echo "$as_me: Found GNU make at $MAKE_CANDIDATE, however this is not version $MAKE_REQUIRED_VERSION or later. (it is: $MAKE_VERSION_STRING). Ignoring." >&6;}
- else
- if test "x$OPENJDK_BUILD_OS" = "xwindows"; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- MAKE_EXPECTED_ENV='cygwin'
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- MAKE_EXPECTED_ENV='msys'
- else
- as_fn_error $? "Unknown Windows environment" "$LINENO" 5
- fi
- MAKE_BUILT_FOR=`$MAKE_CANDIDATE --version | $GREP -i 'built for'`
- IS_MAKE_CORRECT_ENV=`$ECHO $MAKE_BUILT_FOR | $GREP $MAKE_EXPECTED_ENV`
- else
- # Not relevant for non-Windows
- IS_MAKE_CORRECT_ENV=true
- fi
- if test "x$IS_MAKE_CORRECT_ENV" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found GNU make version $MAKE_VERSION_STRING at $MAKE_CANDIDATE, but it is not for $MAKE_EXPECTED_ENV (it says: $MAKE_BUILT_FOR). Ignoring." >&5
-$as_echo "$as_me: Found GNU make version $MAKE_VERSION_STRING at $MAKE_CANDIDATE, but it is not for $MAKE_EXPECTED_ENV (it says: $MAKE_BUILT_FOR). Ignoring." >&6;}
- else
- FOUND_MAKE=$MAKE_CANDIDATE
-
- # Only process if variable expands to non-empty
-
- if test "x$FOUND_MAKE" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$FOUND_MAKE"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path=`$CYGPATH -u "$path"`
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path=`$CYGPATH -u "$path"`
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of FOUND_MAKE" "$LINENO" 5
- fi
- fi
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file presence.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- # Short path failed, file does not exist as specified.
- # Try adding .exe or .cmd
- if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
- elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of FOUND_MAKE, which resolves as \"$new_path\", is invalid." >&5
-$as_echo "$as_me: The path of FOUND_MAKE, which resolves as \"$new_path\", is invalid." >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&5
-$as_echo "$as_me: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&6;}
- as_fn_error $? "Cannot locate the the path of FOUND_MAKE" "$LINENO" 5
- fi
- else
- input_to_shortpath="$new_path"
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
- new_path="$input_to_shortpath"
-
- input_path="$input_to_shortpath"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $input_to_shortpath | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$FOUND_MAKE"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
-
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in MSYS causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- fi
-
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of FOUND_MAKE" "$LINENO" 5
- fi
- fi
-
- # Now new_path has a complete unix path to the binary
- if test "x`$ECHO $new_path | $GREP ^/bin/`" != x; then
- # Keep paths in /bin as-is, but remove trailing .exe if any
- new_path="${new_path/%.exe/}"
- # Do not save /bin paths to all_fixpath_prefixes!
- else
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $new_path`
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
- # Output is in $new_path
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
- fi
-
- else
- # We're on a unix platform. Hooray! :)
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$FOUND_MAKE"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Cannot rely on the command "which" here since it doesn't always work.
- is_absolute_path=`$ECHO "$path" | $GREP ^/`
- if test -z "$is_absolute_path"; then
- # Path to executable is not absolute. Find it.
- IFS_save="$IFS"
- IFS=:
- for p in $PATH; do
- if test -f "$p/$path" && test -x "$p/$path"; then
- new_path="$p/$path"
- break
- fi
- done
- IFS="$IFS_save"
- else
- # This is an absolute path, we can use it without further modifications.
- new_path="$path"
- fi
-
- if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
-$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of FOUND_MAKE" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
-
- if test "x$complete" != "x$new_complete"; then
- FOUND_MAKE="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting FOUND_MAKE to \"$new_complete\"" >&5
-$as_echo "$as_me: Rewriting FOUND_MAKE to \"$new_complete\"" >&6;}
- fi
- fi
-
- fi
- fi
- fi
- fi
-
- fi
-
- if test "x$FOUND_MAKE" = x; then
- if test "x$TOOLCHAIN_PATH" != x; then
- # We have a toolchain path, check that as well before giving up.
- OLD_PATH=$PATH
- PATH=$TOOLCHAIN_PATH:$PATH
- for ac_prog in gmake
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_CHECK_TOOLSDIR_GMAKE+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $CHECK_TOOLSDIR_GMAKE in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_CHECK_TOOLSDIR_GMAKE="$CHECK_TOOLSDIR_GMAKE" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_CHECK_TOOLSDIR_GMAKE="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-CHECK_TOOLSDIR_GMAKE=$ac_cv_path_CHECK_TOOLSDIR_GMAKE
-if test -n "$CHECK_TOOLSDIR_GMAKE"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CHECK_TOOLSDIR_GMAKE" >&5
-$as_echo "$CHECK_TOOLSDIR_GMAKE" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$CHECK_TOOLSDIR_GMAKE" && break
-done
-
-
- MAKE_CANDIDATE=""$CHECK_TOOLSDIR_GMAKE""
- DESCRIPTION="gmake in tools-dir"
-
- # On Cygwin, we require a newer version of make than on other platforms
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- MAKE_VERSION_EXPR="-e 4\."
- MAKE_REQUIRED_VERSION="4.0"
- else
- MAKE_VERSION_EXPR="-e 3\.8[12] -e 4\."
- MAKE_REQUIRED_VERSION="3.81"
- fi
-
- if test "x$MAKE_CANDIDATE" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Testing potential make at $MAKE_CANDIDATE, found using $DESCRIPTION" >&5
-$as_echo "$as_me: Testing potential make at $MAKE_CANDIDATE, found using $DESCRIPTION" >&6;}
- MAKE_VERSION_STRING=`$MAKE_CANDIDATE --version | $HEAD -n 1`
- IS_GNU_MAKE=`$ECHO $MAKE_VERSION_STRING | $GREP 'GNU Make'`
- if test "x$IS_GNU_MAKE" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found potential make at $MAKE_CANDIDATE, however, this is not GNU Make. Ignoring." >&5
-$as_echo "$as_me: Found potential make at $MAKE_CANDIDATE, however, this is not GNU Make. Ignoring." >&6;}
- else
- IS_MODERN_MAKE=`$ECHO $MAKE_VERSION_STRING | $GREP $MAKE_VERSION_EXPR`
- if test "x$IS_MODERN_MAKE" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found GNU make at $MAKE_CANDIDATE, however this is not version $MAKE_REQUIRED_VERSION or later. (it is: $MAKE_VERSION_STRING). Ignoring." >&5
-$as_echo "$as_me: Found GNU make at $MAKE_CANDIDATE, however this is not version $MAKE_REQUIRED_VERSION or later. (it is: $MAKE_VERSION_STRING). Ignoring." >&6;}
- else
- if test "x$OPENJDK_BUILD_OS" = "xwindows"; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- MAKE_EXPECTED_ENV='cygwin'
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- MAKE_EXPECTED_ENV='msys'
- else
- as_fn_error $? "Unknown Windows environment" "$LINENO" 5
- fi
- MAKE_BUILT_FOR=`$MAKE_CANDIDATE --version | $GREP -i 'built for'`
- IS_MAKE_CORRECT_ENV=`$ECHO $MAKE_BUILT_FOR | $GREP $MAKE_EXPECTED_ENV`
- else
- # Not relevant for non-Windows
- IS_MAKE_CORRECT_ENV=true
- fi
- if test "x$IS_MAKE_CORRECT_ENV" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found GNU make version $MAKE_VERSION_STRING at $MAKE_CANDIDATE, but it is not for $MAKE_EXPECTED_ENV (it says: $MAKE_BUILT_FOR). Ignoring." >&5
-$as_echo "$as_me: Found GNU make version $MAKE_VERSION_STRING at $MAKE_CANDIDATE, but it is not for $MAKE_EXPECTED_ENV (it says: $MAKE_BUILT_FOR). Ignoring." >&6;}
- else
- FOUND_MAKE=$MAKE_CANDIDATE
-
- # Only process if variable expands to non-empty
-
- if test "x$FOUND_MAKE" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$FOUND_MAKE"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path=`$CYGPATH -u "$path"`
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path=`$CYGPATH -u "$path"`
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of FOUND_MAKE" "$LINENO" 5
- fi
- fi
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file presence.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- # Short path failed, file does not exist as specified.
- # Try adding .exe or .cmd
- if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
- elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of FOUND_MAKE, which resolves as \"$new_path\", is invalid." >&5
-$as_echo "$as_me: The path of FOUND_MAKE, which resolves as \"$new_path\", is invalid." >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&5
-$as_echo "$as_me: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&6;}
- as_fn_error $? "Cannot locate the the path of FOUND_MAKE" "$LINENO" 5
- fi
- else
- input_to_shortpath="$new_path"
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
- new_path="$input_to_shortpath"
-
- input_path="$input_to_shortpath"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $input_to_shortpath | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$FOUND_MAKE"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
-
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in MSYS causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- fi
-
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of FOUND_MAKE" "$LINENO" 5
- fi
- fi
-
- # Now new_path has a complete unix path to the binary
- if test "x`$ECHO $new_path | $GREP ^/bin/`" != x; then
- # Keep paths in /bin as-is, but remove trailing .exe if any
- new_path="${new_path/%.exe/}"
- # Do not save /bin paths to all_fixpath_prefixes!
- else
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $new_path`
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
- # Output is in $new_path
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
- fi
-
- else
- # We're on a unix platform. Hooray! :)
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$FOUND_MAKE"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Cannot rely on the command "which" here since it doesn't always work.
- is_absolute_path=`$ECHO "$path" | $GREP ^/`
- if test -z "$is_absolute_path"; then
- # Path to executable is not absolute. Find it.
- IFS_save="$IFS"
- IFS=:
- for p in $PATH; do
- if test -f "$p/$path" && test -x "$p/$path"; then
- new_path="$p/$path"
- break
- fi
- done
- IFS="$IFS_save"
- else
- # This is an absolute path, we can use it without further modifications.
- new_path="$path"
- fi
-
- if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
-$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of FOUND_MAKE" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
-
- if test "x$complete" != "x$new_complete"; then
- FOUND_MAKE="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting FOUND_MAKE to \"$new_complete\"" >&5
-$as_echo "$as_me: Rewriting FOUND_MAKE to \"$new_complete\"" >&6;}
- fi
- fi
-
- fi
- fi
- fi
- fi
-
- if test "x$FOUND_MAKE" = x; then
- for ac_prog in make
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_CHECK_TOOLSDIR_MAKE+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $CHECK_TOOLSDIR_MAKE in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_CHECK_TOOLSDIR_MAKE="$CHECK_TOOLSDIR_MAKE" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_CHECK_TOOLSDIR_MAKE="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-CHECK_TOOLSDIR_MAKE=$ac_cv_path_CHECK_TOOLSDIR_MAKE
-if test -n "$CHECK_TOOLSDIR_MAKE"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CHECK_TOOLSDIR_MAKE" >&5
-$as_echo "$CHECK_TOOLSDIR_MAKE" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$CHECK_TOOLSDIR_MAKE" && break
-done
-
-
- MAKE_CANDIDATE=""$CHECK_TOOLSDIR_MAKE""
- DESCRIPTION="make in tools-dir"
-
- # On Cygwin, we require a newer version of make than on other platforms
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- MAKE_VERSION_EXPR="-e 4\."
- MAKE_REQUIRED_VERSION="4.0"
- else
- MAKE_VERSION_EXPR="-e 3\.8[12] -e 4\."
- MAKE_REQUIRED_VERSION="3.81"
- fi
-
- if test "x$MAKE_CANDIDATE" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Testing potential make at $MAKE_CANDIDATE, found using $DESCRIPTION" >&5
-$as_echo "$as_me: Testing potential make at $MAKE_CANDIDATE, found using $DESCRIPTION" >&6;}
- MAKE_VERSION_STRING=`$MAKE_CANDIDATE --version | $HEAD -n 1`
- IS_GNU_MAKE=`$ECHO $MAKE_VERSION_STRING | $GREP 'GNU Make'`
- if test "x$IS_GNU_MAKE" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found potential make at $MAKE_CANDIDATE, however, this is not GNU Make. Ignoring." >&5
-$as_echo "$as_me: Found potential make at $MAKE_CANDIDATE, however, this is not GNU Make. Ignoring." >&6;}
- else
- IS_MODERN_MAKE=`$ECHO $MAKE_VERSION_STRING | $GREP $MAKE_VERSION_EXPR`
- if test "x$IS_MODERN_MAKE" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found GNU make at $MAKE_CANDIDATE, however this is not version $MAKE_REQUIRED_VERSION or later. (it is: $MAKE_VERSION_STRING). Ignoring." >&5
-$as_echo "$as_me: Found GNU make at $MAKE_CANDIDATE, however this is not version $MAKE_REQUIRED_VERSION or later. (it is: $MAKE_VERSION_STRING). Ignoring." >&6;}
- else
- if test "x$OPENJDK_BUILD_OS" = "xwindows"; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- MAKE_EXPECTED_ENV='cygwin'
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- MAKE_EXPECTED_ENV='msys'
- else
- as_fn_error $? "Unknown Windows environment" "$LINENO" 5
- fi
- MAKE_BUILT_FOR=`$MAKE_CANDIDATE --version | $GREP -i 'built for'`
- IS_MAKE_CORRECT_ENV=`$ECHO $MAKE_BUILT_FOR | $GREP $MAKE_EXPECTED_ENV`
- else
- # Not relevant for non-Windows
- IS_MAKE_CORRECT_ENV=true
- fi
- if test "x$IS_MAKE_CORRECT_ENV" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found GNU make version $MAKE_VERSION_STRING at $MAKE_CANDIDATE, but it is not for $MAKE_EXPECTED_ENV (it says: $MAKE_BUILT_FOR). Ignoring." >&5
-$as_echo "$as_me: Found GNU make version $MAKE_VERSION_STRING at $MAKE_CANDIDATE, but it is not for $MAKE_EXPECTED_ENV (it says: $MAKE_BUILT_FOR). Ignoring." >&6;}
- else
- FOUND_MAKE=$MAKE_CANDIDATE
-
- # Only process if variable expands to non-empty
-
- if test "x$FOUND_MAKE" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$FOUND_MAKE"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path=`$CYGPATH -u "$path"`
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path=`$CYGPATH -u "$path"`
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of FOUND_MAKE" "$LINENO" 5
- fi
- fi
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file presence.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- # Short path failed, file does not exist as specified.
- # Try adding .exe or .cmd
- if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
- elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of FOUND_MAKE, which resolves as \"$new_path\", is invalid." >&5
-$as_echo "$as_me: The path of FOUND_MAKE, which resolves as \"$new_path\", is invalid." >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&5
-$as_echo "$as_me: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&6;}
- as_fn_error $? "Cannot locate the the path of FOUND_MAKE" "$LINENO" 5
- fi
- else
- input_to_shortpath="$new_path"
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
- new_path="$input_to_shortpath"
-
- input_path="$input_to_shortpath"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $input_to_shortpath | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$FOUND_MAKE"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
-
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in MSYS causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- fi
-
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of FOUND_MAKE" "$LINENO" 5
- fi
- fi
-
- # Now new_path has a complete unix path to the binary
- if test "x`$ECHO $new_path | $GREP ^/bin/`" != x; then
- # Keep paths in /bin as-is, but remove trailing .exe if any
- new_path="${new_path/%.exe/}"
- # Do not save /bin paths to all_fixpath_prefixes!
- else
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $new_path`
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
- # Output is in $new_path
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
- fi
-
- else
- # We're on a unix platform. Hooray! :)
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$FOUND_MAKE"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Cannot rely on the command "which" here since it doesn't always work.
- is_absolute_path=`$ECHO "$path" | $GREP ^/`
- if test -z "$is_absolute_path"; then
- # Path to executable is not absolute. Find it.
- IFS_save="$IFS"
- IFS=:
- for p in $PATH; do
- if test -f "$p/$path" && test -x "$p/$path"; then
- new_path="$p/$path"
- break
- fi
- done
- IFS="$IFS_save"
- else
- # This is an absolute path, we can use it without further modifications.
- new_path="$path"
- fi
-
- if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
-$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of FOUND_MAKE" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
-
- if test "x$complete" != "x$new_complete"; then
- FOUND_MAKE="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting FOUND_MAKE to \"$new_complete\"" >&5
-$as_echo "$as_me: Rewriting FOUND_MAKE to \"$new_complete\"" >&6;}
- fi
- fi
-
- fi
- fi
- fi
- fi
-
- fi
- PATH=$OLD_PATH
- fi
- fi
-
- if test "x$FOUND_MAKE" = x; then
- as_fn_error $? "Cannot find GNU make $MAKE_REQUIRED_VERSION or newer! Please put it in the path, or add e.g. MAKE=/opt/gmake3.81/make as argument to configure." "$LINENO" 5
- fi
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !MAKE! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!MAKE!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xMAKE" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of MAKE from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of MAKE from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
-
- # Try our hardest to locate a correct version of GNU make
- for ac_prog in gmake
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_CHECK_GMAKE+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $CHECK_GMAKE in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_CHECK_GMAKE="$CHECK_GMAKE" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_CHECK_GMAKE="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-CHECK_GMAKE=$ac_cv_path_CHECK_GMAKE
-if test -n "$CHECK_GMAKE"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CHECK_GMAKE" >&5
-$as_echo "$CHECK_GMAKE" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$CHECK_GMAKE" && break
-done
-
-
- MAKE_CANDIDATE=""$CHECK_GMAKE""
- DESCRIPTION="gmake in PATH"
-
- # On Cygwin, we require a newer version of make than on other platforms
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- MAKE_VERSION_EXPR="-e 4\."
- MAKE_REQUIRED_VERSION="4.0"
- else
- MAKE_VERSION_EXPR="-e 3\.8[12] -e 4\."
- MAKE_REQUIRED_VERSION="3.81"
- fi
-
- if test "x$MAKE_CANDIDATE" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Testing potential make at $MAKE_CANDIDATE, found using $DESCRIPTION" >&5
-$as_echo "$as_me: Testing potential make at $MAKE_CANDIDATE, found using $DESCRIPTION" >&6;}
- MAKE_VERSION_STRING=`$MAKE_CANDIDATE --version | $HEAD -n 1`
- IS_GNU_MAKE=`$ECHO $MAKE_VERSION_STRING | $GREP 'GNU Make'`
- if test "x$IS_GNU_MAKE" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found potential make at $MAKE_CANDIDATE, however, this is not GNU Make. Ignoring." >&5
-$as_echo "$as_me: Found potential make at $MAKE_CANDIDATE, however, this is not GNU Make. Ignoring." >&6;}
- else
- IS_MODERN_MAKE=`$ECHO $MAKE_VERSION_STRING | $GREP $MAKE_VERSION_EXPR`
- if test "x$IS_MODERN_MAKE" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found GNU make at $MAKE_CANDIDATE, however this is not version $MAKE_REQUIRED_VERSION or later. (it is: $MAKE_VERSION_STRING). Ignoring." >&5
-$as_echo "$as_me: Found GNU make at $MAKE_CANDIDATE, however this is not version $MAKE_REQUIRED_VERSION or later. (it is: $MAKE_VERSION_STRING). Ignoring." >&6;}
- else
- if test "x$OPENJDK_BUILD_OS" = "xwindows"; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- MAKE_EXPECTED_ENV='cygwin'
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- MAKE_EXPECTED_ENV='msys'
- else
- as_fn_error $? "Unknown Windows environment" "$LINENO" 5
- fi
- MAKE_BUILT_FOR=`$MAKE_CANDIDATE --version | $GREP -i 'built for'`
- IS_MAKE_CORRECT_ENV=`$ECHO $MAKE_BUILT_FOR | $GREP $MAKE_EXPECTED_ENV`
- else
- # Not relevant for non-Windows
- IS_MAKE_CORRECT_ENV=true
- fi
- if test "x$IS_MAKE_CORRECT_ENV" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found GNU make version $MAKE_VERSION_STRING at $MAKE_CANDIDATE, but it is not for $MAKE_EXPECTED_ENV (it says: $MAKE_BUILT_FOR). Ignoring." >&5
-$as_echo "$as_me: Found GNU make version $MAKE_VERSION_STRING at $MAKE_CANDIDATE, but it is not for $MAKE_EXPECTED_ENV (it says: $MAKE_BUILT_FOR). Ignoring." >&6;}
- else
- FOUND_MAKE=$MAKE_CANDIDATE
-
- # Only process if variable expands to non-empty
-
- if test "x$FOUND_MAKE" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$FOUND_MAKE"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path=`$CYGPATH -u "$path"`
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path=`$CYGPATH -u "$path"`
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of FOUND_MAKE" "$LINENO" 5
- fi
- fi
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file presence.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- # Short path failed, file does not exist as specified.
- # Try adding .exe or .cmd
- if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
- elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of FOUND_MAKE, which resolves as \"$new_path\", is invalid." >&5
-$as_echo "$as_me: The path of FOUND_MAKE, which resolves as \"$new_path\", is invalid." >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&5
-$as_echo "$as_me: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&6;}
- as_fn_error $? "Cannot locate the the path of FOUND_MAKE" "$LINENO" 5
- fi
- else
- input_to_shortpath="$new_path"
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
- new_path="$input_to_shortpath"
-
- input_path="$input_to_shortpath"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $input_to_shortpath | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$FOUND_MAKE"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
-
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in MSYS causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- fi
-
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of FOUND_MAKE" "$LINENO" 5
- fi
- fi
-
- # Now new_path has a complete unix path to the binary
- if test "x`$ECHO $new_path | $GREP ^/bin/`" != x; then
- # Keep paths in /bin as-is, but remove trailing .exe if any
- new_path="${new_path/%.exe/}"
- # Do not save /bin paths to all_fixpath_prefixes!
- else
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $new_path`
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
- # Output is in $new_path
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
- fi
-
- else
- # We're on a unix platform. Hooray! :)
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$FOUND_MAKE"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Cannot rely on the command "which" here since it doesn't always work.
- is_absolute_path=`$ECHO "$path" | $GREP ^/`
- if test -z "$is_absolute_path"; then
- # Path to executable is not absolute. Find it.
- IFS_save="$IFS"
- IFS=:
- for p in $PATH; do
- if test -f "$p/$path" && test -x "$p/$path"; then
- new_path="$p/$path"
- break
- fi
- done
- IFS="$IFS_save"
- else
- # This is an absolute path, we can use it without further modifications.
- new_path="$path"
- fi
-
- if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
-$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of FOUND_MAKE" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
-
- if test "x$complete" != "x$new_complete"; then
- FOUND_MAKE="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting FOUND_MAKE to \"$new_complete\"" >&5
-$as_echo "$as_me: Rewriting FOUND_MAKE to \"$new_complete\"" >&6;}
- fi
- fi
-
- fi
- fi
- fi
- fi
-
-
- if test "x$FOUND_MAKE" = x; then
- for ac_prog in make
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_CHECK_MAKE+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $CHECK_MAKE in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_CHECK_MAKE="$CHECK_MAKE" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_CHECK_MAKE="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-CHECK_MAKE=$ac_cv_path_CHECK_MAKE
-if test -n "$CHECK_MAKE"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CHECK_MAKE" >&5
-$as_echo "$CHECK_MAKE" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$CHECK_MAKE" && break
-done
-
-
- MAKE_CANDIDATE=""$CHECK_MAKE""
- DESCRIPTION="make in PATH"
-
- # On Cygwin, we require a newer version of make than on other platforms
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- MAKE_VERSION_EXPR="-e 4\."
- MAKE_REQUIRED_VERSION="4.0"
- else
- MAKE_VERSION_EXPR="-e 3\.8[12] -e 4\."
- MAKE_REQUIRED_VERSION="3.81"
- fi
-
- if test "x$MAKE_CANDIDATE" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Testing potential make at $MAKE_CANDIDATE, found using $DESCRIPTION" >&5
-$as_echo "$as_me: Testing potential make at $MAKE_CANDIDATE, found using $DESCRIPTION" >&6;}
- MAKE_VERSION_STRING=`$MAKE_CANDIDATE --version | $HEAD -n 1`
- IS_GNU_MAKE=`$ECHO $MAKE_VERSION_STRING | $GREP 'GNU Make'`
- if test "x$IS_GNU_MAKE" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found potential make at $MAKE_CANDIDATE, however, this is not GNU Make. Ignoring." >&5
-$as_echo "$as_me: Found potential make at $MAKE_CANDIDATE, however, this is not GNU Make. Ignoring." >&6;}
- else
- IS_MODERN_MAKE=`$ECHO $MAKE_VERSION_STRING | $GREP $MAKE_VERSION_EXPR`
- if test "x$IS_MODERN_MAKE" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found GNU make at $MAKE_CANDIDATE, however this is not version $MAKE_REQUIRED_VERSION or later. (it is: $MAKE_VERSION_STRING). Ignoring." >&5
-$as_echo "$as_me: Found GNU make at $MAKE_CANDIDATE, however this is not version $MAKE_REQUIRED_VERSION or later. (it is: $MAKE_VERSION_STRING). Ignoring." >&6;}
- else
- if test "x$OPENJDK_BUILD_OS" = "xwindows"; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- MAKE_EXPECTED_ENV='cygwin'
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- MAKE_EXPECTED_ENV='msys'
- else
- as_fn_error $? "Unknown Windows environment" "$LINENO" 5
- fi
- MAKE_BUILT_FOR=`$MAKE_CANDIDATE --version | $GREP -i 'built for'`
- IS_MAKE_CORRECT_ENV=`$ECHO $MAKE_BUILT_FOR | $GREP $MAKE_EXPECTED_ENV`
- else
- # Not relevant for non-Windows
- IS_MAKE_CORRECT_ENV=true
- fi
- if test "x$IS_MAKE_CORRECT_ENV" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found GNU make version $MAKE_VERSION_STRING at $MAKE_CANDIDATE, but it is not for $MAKE_EXPECTED_ENV (it says: $MAKE_BUILT_FOR). Ignoring." >&5
-$as_echo "$as_me: Found GNU make version $MAKE_VERSION_STRING at $MAKE_CANDIDATE, but it is not for $MAKE_EXPECTED_ENV (it says: $MAKE_BUILT_FOR). Ignoring." >&6;}
- else
- FOUND_MAKE=$MAKE_CANDIDATE
-
- # Only process if variable expands to non-empty
-
- if test "x$FOUND_MAKE" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$FOUND_MAKE"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path=`$CYGPATH -u "$path"`
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path=`$CYGPATH -u "$path"`
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of FOUND_MAKE" "$LINENO" 5
- fi
- fi
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file presence.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- # Short path failed, file does not exist as specified.
- # Try adding .exe or .cmd
- if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
- elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of FOUND_MAKE, which resolves as \"$new_path\", is invalid." >&5
-$as_echo "$as_me: The path of FOUND_MAKE, which resolves as \"$new_path\", is invalid." >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&5
-$as_echo "$as_me: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&6;}
- as_fn_error $? "Cannot locate the the path of FOUND_MAKE" "$LINENO" 5
- fi
- else
- input_to_shortpath="$new_path"
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
- new_path="$input_to_shortpath"
-
- input_path="$input_to_shortpath"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $input_to_shortpath | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$FOUND_MAKE"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
-
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in MSYS causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- fi
-
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of FOUND_MAKE" "$LINENO" 5
- fi
- fi
-
- # Now new_path has a complete unix path to the binary
- if test "x`$ECHO $new_path | $GREP ^/bin/`" != x; then
- # Keep paths in /bin as-is, but remove trailing .exe if any
- new_path="${new_path/%.exe/}"
- # Do not save /bin paths to all_fixpath_prefixes!
- else
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $new_path`
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
- # Output is in $new_path
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
- fi
-
- else
- # We're on a unix platform. Hooray! :)
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$FOUND_MAKE"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Cannot rely on the command "which" here since it doesn't always work.
- is_absolute_path=`$ECHO "$path" | $GREP ^/`
- if test -z "$is_absolute_path"; then
- # Path to executable is not absolute. Find it.
- IFS_save="$IFS"
- IFS=:
- for p in $PATH; do
- if test -f "$p/$path" && test -x "$p/$path"; then
- new_path="$p/$path"
- break
- fi
- done
- IFS="$IFS_save"
- else
- # This is an absolute path, we can use it without further modifications.
- new_path="$path"
- fi
-
- if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
-$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of FOUND_MAKE" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
-
- if test "x$complete" != "x$new_complete"; then
- FOUND_MAKE="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting FOUND_MAKE to \"$new_complete\"" >&5
-$as_echo "$as_me: Rewriting FOUND_MAKE to \"$new_complete\"" >&6;}
- fi
- fi
-
- fi
- fi
- fi
- fi
-
- fi
-
- if test "x$FOUND_MAKE" = x; then
- if test "x$TOOLCHAIN_PATH" != x; then
- # We have a toolchain path, check that as well before giving up.
- OLD_PATH=$PATH
- PATH=$TOOLCHAIN_PATH:$PATH
- for ac_prog in gmake
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_CHECK_TOOLSDIR_GMAKE+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $CHECK_TOOLSDIR_GMAKE in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_CHECK_TOOLSDIR_GMAKE="$CHECK_TOOLSDIR_GMAKE" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_CHECK_TOOLSDIR_GMAKE="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-CHECK_TOOLSDIR_GMAKE=$ac_cv_path_CHECK_TOOLSDIR_GMAKE
-if test -n "$CHECK_TOOLSDIR_GMAKE"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CHECK_TOOLSDIR_GMAKE" >&5
-$as_echo "$CHECK_TOOLSDIR_GMAKE" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$CHECK_TOOLSDIR_GMAKE" && break
-done
-
-
- MAKE_CANDIDATE=""$CHECK_TOOLSDIR_GMAKE""
- DESCRIPTION="gmake in tools-dir"
-
- # On Cygwin, we require a newer version of make than on other platforms
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- MAKE_VERSION_EXPR="-e 4\."
- MAKE_REQUIRED_VERSION="4.0"
- else
- MAKE_VERSION_EXPR="-e 3\.8[12] -e 4\."
- MAKE_REQUIRED_VERSION="3.81"
- fi
-
- if test "x$MAKE_CANDIDATE" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Testing potential make at $MAKE_CANDIDATE, found using $DESCRIPTION" >&5
-$as_echo "$as_me: Testing potential make at $MAKE_CANDIDATE, found using $DESCRIPTION" >&6;}
- MAKE_VERSION_STRING=`$MAKE_CANDIDATE --version | $HEAD -n 1`
- IS_GNU_MAKE=`$ECHO $MAKE_VERSION_STRING | $GREP 'GNU Make'`
- if test "x$IS_GNU_MAKE" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found potential make at $MAKE_CANDIDATE, however, this is not GNU Make. Ignoring." >&5
-$as_echo "$as_me: Found potential make at $MAKE_CANDIDATE, however, this is not GNU Make. Ignoring." >&6;}
- else
- IS_MODERN_MAKE=`$ECHO $MAKE_VERSION_STRING | $GREP $MAKE_VERSION_EXPR`
- if test "x$IS_MODERN_MAKE" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found GNU make at $MAKE_CANDIDATE, however this is not version $MAKE_REQUIRED_VERSION or later. (it is: $MAKE_VERSION_STRING). Ignoring." >&5
-$as_echo "$as_me: Found GNU make at $MAKE_CANDIDATE, however this is not version $MAKE_REQUIRED_VERSION or later. (it is: $MAKE_VERSION_STRING). Ignoring." >&6;}
- else
- if test "x$OPENJDK_BUILD_OS" = "xwindows"; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- MAKE_EXPECTED_ENV='cygwin'
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- MAKE_EXPECTED_ENV='msys'
- else
- as_fn_error $? "Unknown Windows environment" "$LINENO" 5
- fi
- MAKE_BUILT_FOR=`$MAKE_CANDIDATE --version | $GREP -i 'built for'`
- IS_MAKE_CORRECT_ENV=`$ECHO $MAKE_BUILT_FOR | $GREP $MAKE_EXPECTED_ENV`
- else
- # Not relevant for non-Windows
- IS_MAKE_CORRECT_ENV=true
- fi
- if test "x$IS_MAKE_CORRECT_ENV" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found GNU make version $MAKE_VERSION_STRING at $MAKE_CANDIDATE, but it is not for $MAKE_EXPECTED_ENV (it says: $MAKE_BUILT_FOR). Ignoring." >&5
-$as_echo "$as_me: Found GNU make version $MAKE_VERSION_STRING at $MAKE_CANDIDATE, but it is not for $MAKE_EXPECTED_ENV (it says: $MAKE_BUILT_FOR). Ignoring." >&6;}
- else
- FOUND_MAKE=$MAKE_CANDIDATE
-
- # Only process if variable expands to non-empty
-
- if test "x$FOUND_MAKE" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$FOUND_MAKE"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path=`$CYGPATH -u "$path"`
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path=`$CYGPATH -u "$path"`
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of FOUND_MAKE" "$LINENO" 5
- fi
- fi
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file presence.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- # Short path failed, file does not exist as specified.
- # Try adding .exe or .cmd
- if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
- elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of FOUND_MAKE, which resolves as \"$new_path\", is invalid." >&5
-$as_echo "$as_me: The path of FOUND_MAKE, which resolves as \"$new_path\", is invalid." >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&5
-$as_echo "$as_me: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&6;}
- as_fn_error $? "Cannot locate the the path of FOUND_MAKE" "$LINENO" 5
- fi
- else
- input_to_shortpath="$new_path"
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
- new_path="$input_to_shortpath"
-
- input_path="$input_to_shortpath"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $input_to_shortpath | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$FOUND_MAKE"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
-
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in MSYS causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- fi
-
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of FOUND_MAKE" "$LINENO" 5
- fi
- fi
-
- # Now new_path has a complete unix path to the binary
- if test "x`$ECHO $new_path | $GREP ^/bin/`" != x; then
- # Keep paths in /bin as-is, but remove trailing .exe if any
- new_path="${new_path/%.exe/}"
- # Do not save /bin paths to all_fixpath_prefixes!
- else
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $new_path`
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
- # Output is in $new_path
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
- fi
-
- else
- # We're on a unix platform. Hooray! :)
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$FOUND_MAKE"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Cannot rely on the command "which" here since it doesn't always work.
- is_absolute_path=`$ECHO "$path" | $GREP ^/`
- if test -z "$is_absolute_path"; then
- # Path to executable is not absolute. Find it.
- IFS_save="$IFS"
- IFS=:
- for p in $PATH; do
- if test -f "$p/$path" && test -x "$p/$path"; then
- new_path="$p/$path"
- break
- fi
- done
- IFS="$IFS_save"
- else
- # This is an absolute path, we can use it without further modifications.
- new_path="$path"
- fi
-
- if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
-$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of FOUND_MAKE" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
-
- if test "x$complete" != "x$new_complete"; then
- FOUND_MAKE="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting FOUND_MAKE to \"$new_complete\"" >&5
-$as_echo "$as_me: Rewriting FOUND_MAKE to \"$new_complete\"" >&6;}
- fi
- fi
-
- fi
- fi
- fi
- fi
-
- if test "x$FOUND_MAKE" = x; then
- for ac_prog in make
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_CHECK_TOOLSDIR_MAKE+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $CHECK_TOOLSDIR_MAKE in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_CHECK_TOOLSDIR_MAKE="$CHECK_TOOLSDIR_MAKE" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_CHECK_TOOLSDIR_MAKE="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-CHECK_TOOLSDIR_MAKE=$ac_cv_path_CHECK_TOOLSDIR_MAKE
-if test -n "$CHECK_TOOLSDIR_MAKE"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CHECK_TOOLSDIR_MAKE" >&5
-$as_echo "$CHECK_TOOLSDIR_MAKE" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$CHECK_TOOLSDIR_MAKE" && break
-done
-
-
- MAKE_CANDIDATE=""$CHECK_TOOLSDIR_MAKE""
- DESCRIPTION="make in tools-dir"
-
- # On Cygwin, we require a newer version of make than on other platforms
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- MAKE_VERSION_EXPR="-e 4\."
- MAKE_REQUIRED_VERSION="4.0"
- else
- MAKE_VERSION_EXPR="-e 3\.8[12] -e 4\."
- MAKE_REQUIRED_VERSION="3.81"
- fi
-
- if test "x$MAKE_CANDIDATE" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Testing potential make at $MAKE_CANDIDATE, found using $DESCRIPTION" >&5
-$as_echo "$as_me: Testing potential make at $MAKE_CANDIDATE, found using $DESCRIPTION" >&6;}
- MAKE_VERSION_STRING=`$MAKE_CANDIDATE --version | $HEAD -n 1`
- IS_GNU_MAKE=`$ECHO $MAKE_VERSION_STRING | $GREP 'GNU Make'`
- if test "x$IS_GNU_MAKE" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found potential make at $MAKE_CANDIDATE, however, this is not GNU Make. Ignoring." >&5
-$as_echo "$as_me: Found potential make at $MAKE_CANDIDATE, however, this is not GNU Make. Ignoring." >&6;}
- else
- IS_MODERN_MAKE=`$ECHO $MAKE_VERSION_STRING | $GREP $MAKE_VERSION_EXPR`
- if test "x$IS_MODERN_MAKE" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found GNU make at $MAKE_CANDIDATE, however this is not version $MAKE_REQUIRED_VERSION or later. (it is: $MAKE_VERSION_STRING). Ignoring." >&5
-$as_echo "$as_me: Found GNU make at $MAKE_CANDIDATE, however this is not version $MAKE_REQUIRED_VERSION or later. (it is: $MAKE_VERSION_STRING). Ignoring." >&6;}
- else
- if test "x$OPENJDK_BUILD_OS" = "xwindows"; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- MAKE_EXPECTED_ENV='cygwin'
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- MAKE_EXPECTED_ENV='msys'
- else
- as_fn_error $? "Unknown Windows environment" "$LINENO" 5
- fi
- MAKE_BUILT_FOR=`$MAKE_CANDIDATE --version | $GREP -i 'built for'`
- IS_MAKE_CORRECT_ENV=`$ECHO $MAKE_BUILT_FOR | $GREP $MAKE_EXPECTED_ENV`
- else
- # Not relevant for non-Windows
- IS_MAKE_CORRECT_ENV=true
- fi
- if test "x$IS_MAKE_CORRECT_ENV" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found GNU make version $MAKE_VERSION_STRING at $MAKE_CANDIDATE, but it is not for $MAKE_EXPECTED_ENV (it says: $MAKE_BUILT_FOR). Ignoring." >&5
-$as_echo "$as_me: Found GNU make version $MAKE_VERSION_STRING at $MAKE_CANDIDATE, but it is not for $MAKE_EXPECTED_ENV (it says: $MAKE_BUILT_FOR). Ignoring." >&6;}
- else
- FOUND_MAKE=$MAKE_CANDIDATE
-
- # Only process if variable expands to non-empty
-
- if test "x$FOUND_MAKE" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$FOUND_MAKE"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path=`$CYGPATH -u "$path"`
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path=`$CYGPATH -u "$path"`
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of FOUND_MAKE" "$LINENO" 5
- fi
- fi
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file presence.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- # Short path failed, file does not exist as specified.
- # Try adding .exe or .cmd
- if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
- elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of FOUND_MAKE, which resolves as \"$new_path\", is invalid." >&5
-$as_echo "$as_me: The path of FOUND_MAKE, which resolves as \"$new_path\", is invalid." >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&5
-$as_echo "$as_me: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&6;}
- as_fn_error $? "Cannot locate the the path of FOUND_MAKE" "$LINENO" 5
- fi
- else
- input_to_shortpath="$new_path"
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
- new_path="$input_to_shortpath"
-
- input_path="$input_to_shortpath"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $input_to_shortpath | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$FOUND_MAKE"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
-
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in MSYS causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- fi
-
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of FOUND_MAKE" "$LINENO" 5
- fi
- fi
-
- # Now new_path has a complete unix path to the binary
- if test "x`$ECHO $new_path | $GREP ^/bin/`" != x; then
- # Keep paths in /bin as-is, but remove trailing .exe if any
- new_path="${new_path/%.exe/}"
- # Do not save /bin paths to all_fixpath_prefixes!
- else
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $new_path`
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
- # Output is in $new_path
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
- fi
-
- else
- # We're on a unix platform. Hooray! :)
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$FOUND_MAKE"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Cannot rely on the command "which" here since it doesn't always work.
- is_absolute_path=`$ECHO "$path" | $GREP ^/`
- if test -z "$is_absolute_path"; then
- # Path to executable is not absolute. Find it.
- IFS_save="$IFS"
- IFS=:
- for p in $PATH; do
- if test -f "$p/$path" && test -x "$p/$path"; then
- new_path="$p/$path"
- break
- fi
- done
- IFS="$IFS_save"
- else
- # This is an absolute path, we can use it without further modifications.
- new_path="$path"
- fi
-
- if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
-$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of FOUND_MAKE" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
-
- if test "x$complete" != "x$new_complete"; then
- FOUND_MAKE="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting FOUND_MAKE to \"$new_complete\"" >&5
-$as_echo "$as_me: Rewriting FOUND_MAKE to \"$new_complete\"" >&6;}
- fi
- fi
-
- fi
- fi
- fi
- fi
-
- fi
- PATH=$OLD_PATH
- fi
- fi
-
- if test "x$FOUND_MAKE" = x; then
- as_fn_error $? "Cannot find GNU make $MAKE_REQUIRED_VERSION or newer! Please put it in the path, or add e.g. MAKE=/opt/gmake3.81/make as argument to configure." "$LINENO" 5
- fi
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$MAKE" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool MAKE= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool MAKE= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for MAKE" >&5
-$as_echo_n "checking for MAKE... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$MAKE"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool MAKE=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool MAKE=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_MAKE+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $MAKE in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_MAKE="$MAKE" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_MAKE="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-MAKE=$ac_cv_path_MAKE
-if test -n "$MAKE"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAKE" >&5
-$as_echo "$MAKE" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$MAKE" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool MAKE=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool MAKE=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for MAKE" >&5
-$as_echo_n "checking for MAKE... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool MAKE=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- # If MAKE was set by user, verify the version
-
- MAKE_CANDIDATE=""$MAKE""
- DESCRIPTION="user supplied MAKE=$MAKE"
-
- # On Cygwin, we require a newer version of make than on other platforms
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- MAKE_VERSION_EXPR="-e 4\."
- MAKE_REQUIRED_VERSION="4.0"
- else
- MAKE_VERSION_EXPR="-e 3\.8[12] -e 4\."
- MAKE_REQUIRED_VERSION="3.81"
- fi
-
- if test "x$MAKE_CANDIDATE" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Testing potential make at $MAKE_CANDIDATE, found using $DESCRIPTION" >&5
-$as_echo "$as_me: Testing potential make at $MAKE_CANDIDATE, found using $DESCRIPTION" >&6;}
- MAKE_VERSION_STRING=`$MAKE_CANDIDATE --version | $HEAD -n 1`
- IS_GNU_MAKE=`$ECHO $MAKE_VERSION_STRING | $GREP 'GNU Make'`
- if test "x$IS_GNU_MAKE" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found potential make at $MAKE_CANDIDATE, however, this is not GNU Make. Ignoring." >&5
-$as_echo "$as_me: Found potential make at $MAKE_CANDIDATE, however, this is not GNU Make. Ignoring." >&6;}
- else
- IS_MODERN_MAKE=`$ECHO $MAKE_VERSION_STRING | $GREP $MAKE_VERSION_EXPR`
- if test "x$IS_MODERN_MAKE" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found GNU make at $MAKE_CANDIDATE, however this is not version $MAKE_REQUIRED_VERSION or later. (it is: $MAKE_VERSION_STRING). Ignoring." >&5
-$as_echo "$as_me: Found GNU make at $MAKE_CANDIDATE, however this is not version $MAKE_REQUIRED_VERSION or later. (it is: $MAKE_VERSION_STRING). Ignoring." >&6;}
- else
- if test "x$OPENJDK_BUILD_OS" = "xwindows"; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- MAKE_EXPECTED_ENV='cygwin'
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- MAKE_EXPECTED_ENV='msys'
- else
- as_fn_error $? "Unknown Windows environment" "$LINENO" 5
- fi
- MAKE_BUILT_FOR=`$MAKE_CANDIDATE --version | $GREP -i 'built for'`
- IS_MAKE_CORRECT_ENV=`$ECHO $MAKE_BUILT_FOR | $GREP $MAKE_EXPECTED_ENV`
- else
- # Not relevant for non-Windows
- IS_MAKE_CORRECT_ENV=true
- fi
- if test "x$IS_MAKE_CORRECT_ENV" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found GNU make version $MAKE_VERSION_STRING at $MAKE_CANDIDATE, but it is not for $MAKE_EXPECTED_ENV (it says: $MAKE_BUILT_FOR). Ignoring." >&5
-$as_echo "$as_me: Found GNU make version $MAKE_VERSION_STRING at $MAKE_CANDIDATE, but it is not for $MAKE_EXPECTED_ENV (it says: $MAKE_BUILT_FOR). Ignoring." >&6;}
- else
- FOUND_MAKE=$MAKE_CANDIDATE
-
- # Only process if variable expands to non-empty
-
- if test "x$FOUND_MAKE" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$FOUND_MAKE"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path=`$CYGPATH -u "$path"`
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path=`$CYGPATH -u "$path"`
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of FOUND_MAKE" "$LINENO" 5
- fi
- fi
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file presence.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- # Short path failed, file does not exist as specified.
- # Try adding .exe or .cmd
- if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
- elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of FOUND_MAKE, which resolves as \"$new_path\", is invalid." >&5
-$as_echo "$as_me: The path of FOUND_MAKE, which resolves as \"$new_path\", is invalid." >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&5
-$as_echo "$as_me: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&6;}
- as_fn_error $? "Cannot locate the the path of FOUND_MAKE" "$LINENO" 5
- fi
- else
- input_to_shortpath="$new_path"
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
- new_path="$input_to_shortpath"
-
- input_path="$input_to_shortpath"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $input_to_shortpath | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$FOUND_MAKE"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
-
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in MSYS causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- fi
-
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of FOUND_MAKE" "$LINENO" 5
- fi
- fi
-
- # Now new_path has a complete unix path to the binary
- if test "x`$ECHO $new_path | $GREP ^/bin/`" != x; then
- # Keep paths in /bin as-is, but remove trailing .exe if any
- new_path="${new_path/%.exe/}"
- # Do not save /bin paths to all_fixpath_prefixes!
- else
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $new_path`
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
- # Output is in $new_path
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
- fi
-
- else
- # We're on a unix platform. Hooray! :)
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$FOUND_MAKE"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Cannot rely on the command "which" here since it doesn't always work.
- is_absolute_path=`$ECHO "$path" | $GREP ^/`
- if test -z "$is_absolute_path"; then
- # Path to executable is not absolute. Find it.
- IFS_save="$IFS"
- IFS=:
- for p in $PATH; do
- if test -f "$p/$path" && test -x "$p/$path"; then
- new_path="$p/$path"
- break
- fi
- done
- IFS="$IFS_save"
- else
- # This is an absolute path, we can use it without further modifications.
- new_path="$path"
- fi
-
- if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
-$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of FOUND_MAKE" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
-
- if test "x$complete" != "x$new_complete"; then
- FOUND_MAKE="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting FOUND_MAKE to \"$new_complete\"" >&5
-$as_echo "$as_me: Rewriting FOUND_MAKE to \"$new_complete\"" >&6;}
- fi
- fi
-
- fi
- fi
- fi
- fi
-
- if test "x$FOUND_MAKE" = x; then
- as_fn_error $? "The specified make (by MAKE=$MAKE) is not GNU make $MAKE_REQUIRED_VERSION or newer." "$LINENO" 5
- fi
-
- fi
-
-
- MAKE=$FOUND_MAKE
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: Using GNU make at $FOUND_MAKE (version: $MAKE_VERSION_STRING)" >&5
-$as_echo "$as_me: Using GNU make at $FOUND_MAKE (version: $MAKE_VERSION_STRING)" >&6;}
-
-
- # Check if make supports the output sync option and if so, setup using it.
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if make --output-sync is supported" >&5
-$as_echo_n "checking if make --output-sync is supported... " >&6; }
- if $MAKE --version -O > /dev/null 2>&1; then
- OUTPUT_SYNC_SUPPORTED=true
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for output-sync value" >&5
-$as_echo_n "checking for output-sync value... " >&6; }
-
-# Check whether --with-output-sync was given.
-if test "${with_output_sync+set}" = set; then :
- withval=$with_output_sync; OUTPUT_SYNC=$with_output_sync
-fi
-
- if test "x$OUTPUT_SYNC" = "x"; then
- OUTPUT_SYNC=none
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OUTPUT_SYNC" >&5
-$as_echo "$OUTPUT_SYNC" >&6; }
- if ! $MAKE --version -O$OUTPUT_SYNC > /dev/null 2>&1; then
- as_fn_error $? "Make did not the support the value $OUTPUT_SYNC as output sync type." "$LINENO" 5
- fi
- else
- OUTPUT_SYNC_SUPPORTED=false
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- fi
-
-
-
-
-
-
- # Test if find supports -delete
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if find supports -delete" >&5
-$as_echo_n "checking if find supports -delete... " >&6; }
- FIND_DELETE="-delete"
-
- DELETEDIR=`$MKTEMP -d tmp.XXXXXXXXXX` || (echo Could not create temporary directory!; exit $?)
-
- echo Hejsan > $DELETEDIR/TestIfFindSupportsDelete
-
- TEST_DELETE=`$FIND "$DELETEDIR" -name TestIfFindSupportsDelete $FIND_DELETE 2>&1`
- if test -f $DELETEDIR/TestIfFindSupportsDelete; then
- # No, it does not.
- $RM $DELETEDIR/TestIfFindSupportsDelete
- if test "x$OPENJDK_TARGET_OS" = "xaix"; then
- # AIX 'find' is buggy if called with '-exec {} \+' and an empty file list
- FIND_DELETE="-print | $XARGS $RM"
- else
- FIND_DELETE="-exec $RM \{\} \+"
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
- fi
- $RMDIR $DELETEDIR
-
-
-
- # Test which kind of tar was found
- if test "x$($TAR --version | $GREP "GNU tar")" != "x"; then
- TAR_TYPE="gnu"
- elif test "x$($TAR --version | $GREP "bsdtar")" != "x"; then
- TAR_TYPE="bsd"
- elif test "x$($TAR -v | $GREP "bsdtar")" != "x"; then
- TAR_TYPE="bsd"
- elif test "x$OPENJDK_BUILD_OS" = "xsolaris"; then
- TAR_TYPE="solaris"
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking what type of tar was found" >&5
-$as_echo_n "checking what type of tar was found... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $TAR_TYPE" >&5
-$as_echo "$TAR_TYPE" >&6; }
-
- TAR_CREATE_FILE_PARAM=""
-
- if test "x$TAR_TYPE" = "xgnu"; then
- TAR_INCLUDE_PARAM="T"
- TAR_SUPPORTS_TRANSFORM="true"
- if test "x$OPENJDK_TARGET_OS" = "xsolaris"; then
- # When using gnu tar for Solaris targets, need to use compatibility mode
- TAR_CREATE_EXTRA_PARAM="--format=ustar"
- fi
- else
- TAR_INCLUDE_PARAM="I"
- TAR_SUPPORTS_TRANSFORM="false"
- fi
-
-
-
-
-
-
- # Test that grep supports -Fx with a list of pattern which includes null pattern.
- # This is a problem for the grep resident on AIX.
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking that grep ($GREP) -Fx handles empty lines in the pattern list correctly" >&5
-$as_echo_n "checking that grep ($GREP) -Fx handles empty lines in the pattern list correctly... " >&6; }
- # Multiple subsequent spaces..
- STACK_SPACES='aaa bbb ccc'
- # ..converted to subsequent newlines, causes STACK_LIST to be a list with some empty
- # patterns in it.
- STACK_LIST=${STACK_SPACES// /$'\n'}
- NEEDLE_SPACES='ccc bbb aaa'
- NEEDLE_LIST=${NEEDLE_SPACES// /$'\n'}
- RESULT="$($GREP -Fvx "$STACK_LIST" <<< "$NEEDLE_LIST")"
- if test "x$RESULT" == "x"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
- else
- if test "x$OPENJDK_TARGET_OS" = "xaix"; then
- ADDINFO="Please make sure you use GNU grep, usually found at /opt/freeware/bin."
- fi
- as_fn_error $? "grep does not handle -Fx correctly. ${ADDINFO}" "$LINENO" 5
- fi
-
-
- # These tools might not be installed by default,
- # need hint on how to install them.
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${UNZIP+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in unzip
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_UNZIP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $UNZIP in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_UNZIP="$UNZIP" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_UNZIP="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-UNZIP=$ac_cv_path_UNZIP
-if test -n "$UNZIP"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $UNZIP" >&5
-$as_echo "$UNZIP" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$UNZIP" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !UNZIP! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!UNZIP!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xUNZIP" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of UNZIP from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of UNZIP from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in unzip
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_UNZIP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $UNZIP in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_UNZIP="$UNZIP" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_UNZIP="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-UNZIP=$ac_cv_path_UNZIP
-if test -n "$UNZIP"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $UNZIP" >&5
-$as_echo "$UNZIP" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$UNZIP" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$UNZIP" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool UNZIP= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool UNZIP= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for UNZIP" >&5
-$as_echo_n "checking for UNZIP... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$UNZIP"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool UNZIP=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool UNZIP=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_UNZIP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $UNZIP in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_UNZIP="$UNZIP" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_UNZIP="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-UNZIP=$ac_cv_path_UNZIP
-if test -n "$UNZIP"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $UNZIP" >&5
-$as_echo "$UNZIP" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$UNZIP" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool UNZIP=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool UNZIP=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for UNZIP" >&5
-$as_echo_n "checking for UNZIP... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool UNZIP=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
- if test "x$UNZIP" = x; then
- as_fn_error $? "Could not find required tool for UNZIP" "$LINENO" 5
- fi
-
-
- # Since zip uses "ZIP" as a environment variable for passing options, we need
- # to name our variable differently, hence ZIPEXE.
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${ZIPEXE+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in zip
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_ZIPEXE+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $ZIPEXE in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_ZIPEXE="$ZIPEXE" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_ZIPEXE="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-ZIPEXE=$ac_cv_path_ZIPEXE
-if test -n "$ZIPEXE"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ZIPEXE" >&5
-$as_echo "$ZIPEXE" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$ZIPEXE" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !ZIPEXE! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!ZIPEXE!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xZIPEXE" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of ZIPEXE from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of ZIPEXE from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in zip
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_ZIPEXE+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $ZIPEXE in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_ZIPEXE="$ZIPEXE" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_ZIPEXE="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-ZIPEXE=$ac_cv_path_ZIPEXE
-if test -n "$ZIPEXE"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ZIPEXE" >&5
-$as_echo "$ZIPEXE" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$ZIPEXE" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$ZIPEXE" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool ZIPEXE= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool ZIPEXE= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ZIPEXE" >&5
-$as_echo_n "checking for ZIPEXE... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$ZIPEXE"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool ZIPEXE=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool ZIPEXE=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_ZIPEXE+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $ZIPEXE in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_ZIPEXE="$ZIPEXE" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_ZIPEXE="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-ZIPEXE=$ac_cv_path_ZIPEXE
-if test -n "$ZIPEXE"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ZIPEXE" >&5
-$as_echo "$ZIPEXE" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$ZIPEXE" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool ZIPEXE=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool ZIPEXE=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ZIPEXE" >&5
-$as_echo_n "checking for ZIPEXE... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool ZIPEXE=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
- if test "x$ZIPEXE" = x; then
- as_fn_error $? "Could not find required tool for ZIPEXE" "$LINENO" 5
- fi
-
-
-
- # Non-required basic tools
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${LDD+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in ldd
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_LDD+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $LDD in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_LDD="$LDD" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_LDD="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-LDD=$ac_cv_path_LDD
-if test -n "$LDD"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LDD" >&5
-$as_echo "$LDD" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$LDD" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !LDD! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!LDD!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xLDD" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of LDD from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of LDD from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in ldd
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_LDD+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $LDD in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_LDD="$LDD" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_LDD="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-LDD=$ac_cv_path_LDD
-if test -n "$LDD"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LDD" >&5
-$as_echo "$LDD" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$LDD" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$LDD" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool LDD= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool LDD= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for LDD" >&5
-$as_echo_n "checking for LDD... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$LDD"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool LDD=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool LDD=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_LDD+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $LDD in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_LDD="$LDD" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_LDD="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-LDD=$ac_cv_path_LDD
-if test -n "$LDD"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LDD" >&5
-$as_echo "$LDD" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$LDD" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool LDD=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool LDD=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for LDD" >&5
-$as_echo_n "checking for LDD... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool LDD=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
- if test "x$LDD" = "x"; then
- # List shared lib dependencies is used for
- # debug output and checking for forbidden dependencies.
- # We can build without it.
- LDD="true"
- fi
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${READELF+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in greadelf readelf
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_READELF+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $READELF in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_READELF="$READELF" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_READELF="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-READELF=$ac_cv_path_READELF
-if test -n "$READELF"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $READELF" >&5
-$as_echo "$READELF" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$READELF" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !READELF! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!READELF!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xREADELF" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of READELF from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of READELF from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in greadelf readelf
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_READELF+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $READELF in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_READELF="$READELF" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_READELF="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-READELF=$ac_cv_path_READELF
-if test -n "$READELF"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $READELF" >&5
-$as_echo "$READELF" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$READELF" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$READELF" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool READELF= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool READELF= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for READELF" >&5
-$as_echo_n "checking for READELF... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$READELF"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool READELF=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool READELF=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_READELF+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $READELF in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_READELF="$READELF" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_READELF="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-READELF=$ac_cv_path_READELF
-if test -n "$READELF"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $READELF" >&5
-$as_echo "$READELF" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$READELF" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool READELF=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool READELF=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for READELF" >&5
-$as_echo_n "checking for READELF... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool READELF=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${DOT+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in dot
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_DOT+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $DOT in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_DOT="$DOT" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_DOT="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-DOT=$ac_cv_path_DOT
-if test -n "$DOT"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DOT" >&5
-$as_echo "$DOT" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$DOT" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !DOT! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!DOT!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xDOT" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of DOT from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of DOT from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in dot
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_DOT+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $DOT in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_DOT="$DOT" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_DOT="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-DOT=$ac_cv_path_DOT
-if test -n "$DOT"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DOT" >&5
-$as_echo "$DOT" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$DOT" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$DOT" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool DOT= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool DOT= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for DOT" >&5
-$as_echo_n "checking for DOT... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$DOT"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool DOT=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool DOT=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_DOT+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $DOT in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_DOT="$DOT" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_DOT="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-DOT=$ac_cv_path_DOT
-if test -n "$DOT"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DOT" >&5
-$as_echo "$DOT" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$DOT" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool DOT=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool DOT=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for DOT" >&5
-$as_echo_n "checking for DOT... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool DOT=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${HG+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in hg
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_HG+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $HG in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_HG="$HG" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_HG="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-HG=$ac_cv_path_HG
-if test -n "$HG"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $HG" >&5
-$as_echo "$HG" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$HG" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !HG! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!HG!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xHG" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of HG from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of HG from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in hg
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_HG+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $HG in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_HG="$HG" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_HG="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-HG=$ac_cv_path_HG
-if test -n "$HG"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $HG" >&5
-$as_echo "$HG" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$HG" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$HG" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool HG= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool HG= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for HG" >&5
-$as_echo_n "checking for HG... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$HG"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool HG=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool HG=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_HG+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $HG in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_HG="$HG" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_HG="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-HG=$ac_cv_path_HG
-if test -n "$HG"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $HG" >&5
-$as_echo "$HG" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$HG" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool HG=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool HG=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for HG" >&5
-$as_echo_n "checking for HG... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool HG=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${STAT+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in stat
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_STAT+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $STAT in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_STAT="$STAT" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_STAT="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-STAT=$ac_cv_path_STAT
-if test -n "$STAT"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STAT" >&5
-$as_echo "$STAT" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$STAT" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !STAT! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!STAT!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xSTAT" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of STAT from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of STAT from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in stat
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_STAT+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $STAT in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_STAT="$STAT" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_STAT="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-STAT=$ac_cv_path_STAT
-if test -n "$STAT"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STAT" >&5
-$as_echo "$STAT" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$STAT" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$STAT" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool STAT= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool STAT= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for STAT" >&5
-$as_echo_n "checking for STAT... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$STAT"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool STAT=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool STAT=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_STAT+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $STAT in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_STAT="$STAT" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_STAT="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-STAT=$ac_cv_path_STAT
-if test -n "$STAT"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STAT" >&5
-$as_echo "$STAT" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$STAT" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool STAT=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool STAT=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for STAT" >&5
-$as_echo_n "checking for STAT... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool STAT=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${TIME+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in time
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_TIME+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $TIME in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_TIME="$TIME" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_TIME="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-TIME=$ac_cv_path_TIME
-if test -n "$TIME"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $TIME" >&5
-$as_echo "$TIME" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$TIME" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !TIME! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!TIME!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xTIME" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of TIME from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of TIME from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in time
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_TIME+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $TIME in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_TIME="$TIME" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_TIME="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-TIME=$ac_cv_path_TIME
-if test -n "$TIME"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $TIME" >&5
-$as_echo "$TIME" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$TIME" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$TIME" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool TIME= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool TIME= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for TIME" >&5
-$as_echo_n "checking for TIME... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$TIME"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool TIME=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool TIME=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_TIME+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $TIME in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_TIME="$TIME" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_TIME="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-TIME=$ac_cv_path_TIME
-if test -n "$TIME"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $TIME" >&5
-$as_echo "$TIME" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$TIME" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool TIME=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool TIME=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for TIME" >&5
-$as_echo_n "checking for TIME... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool TIME=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${FLOCK+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in flock
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_FLOCK+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $FLOCK in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_FLOCK="$FLOCK" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_FLOCK="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-FLOCK=$ac_cv_path_FLOCK
-if test -n "$FLOCK"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $FLOCK" >&5
-$as_echo "$FLOCK" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$FLOCK" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !FLOCK! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!FLOCK!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xFLOCK" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of FLOCK from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of FLOCK from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in flock
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_FLOCK+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $FLOCK in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_FLOCK="$FLOCK" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_FLOCK="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-FLOCK=$ac_cv_path_FLOCK
-if test -n "$FLOCK"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $FLOCK" >&5
-$as_echo "$FLOCK" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$FLOCK" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$FLOCK" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool FLOCK= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool FLOCK= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for FLOCK" >&5
-$as_echo_n "checking for FLOCK... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$FLOCK"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool FLOCK=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool FLOCK=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_FLOCK+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $FLOCK in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_FLOCK="$FLOCK" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_FLOCK="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-FLOCK=$ac_cv_path_FLOCK
-if test -n "$FLOCK"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $FLOCK" >&5
-$as_echo "$FLOCK" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$FLOCK" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool FLOCK=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool FLOCK=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for FLOCK" >&5
-$as_echo_n "checking for FLOCK... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool FLOCK=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
- # Dtrace is usually found in /usr/sbin on Solaris, but that directory may not
- # be in the user path.
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${DTRACE+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in dtrace
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_DTRACE+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $DTRACE in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_DTRACE="$DTRACE" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-as_dummy="$PATH:/usr/sbin"
-for as_dir in $as_dummy
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_DTRACE="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-DTRACE=$ac_cv_path_DTRACE
-if test -n "$DTRACE"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DTRACE" >&5
-$as_echo "$DTRACE" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$DTRACE" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !DTRACE! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!DTRACE!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xDTRACE" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of DTRACE from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of DTRACE from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in dtrace
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_DTRACE+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $DTRACE in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_DTRACE="$DTRACE" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-as_dummy="$PATH:/usr/sbin"
-for as_dir in $as_dummy
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_DTRACE="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-DTRACE=$ac_cv_path_DTRACE
-if test -n "$DTRACE"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DTRACE" >&5
-$as_echo "$DTRACE" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$DTRACE" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$DTRACE" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool DTRACE= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool DTRACE= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for DTRACE" >&5
-$as_echo_n "checking for DTRACE... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$DTRACE"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool DTRACE=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool DTRACE=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_DTRACE+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $DTRACE in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_DTRACE="$DTRACE" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_DTRACE="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-DTRACE=$ac_cv_path_DTRACE
-if test -n "$DTRACE"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DTRACE" >&5
-$as_echo "$DTRACE" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$DTRACE" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool DTRACE=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool DTRACE=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for DTRACE" >&5
-$as_echo_n "checking for DTRACE... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool DTRACE=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${PATCH+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in gpatch patch
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_PATCH+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $PATCH in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_PATCH="$PATCH" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_PATCH="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-PATCH=$ac_cv_path_PATCH
-if test -n "$PATCH"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PATCH" >&5
-$as_echo "$PATCH" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$PATCH" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !PATCH! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!PATCH!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xPATCH" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of PATCH from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of PATCH from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in gpatch patch
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_PATCH+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $PATCH in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_PATCH="$PATCH" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_PATCH="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-PATCH=$ac_cv_path_PATCH
-if test -n "$PATCH"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PATCH" >&5
-$as_echo "$PATCH" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$PATCH" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$PATCH" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool PATCH= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool PATCH= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for PATCH" >&5
-$as_echo_n "checking for PATCH... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$PATCH"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool PATCH=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool PATCH=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_PATCH+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $PATCH in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_PATCH="$PATCH" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_PATCH="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-PATCH=$ac_cv_path_PATCH
-if test -n "$PATCH"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PATCH" >&5
-$as_echo "$PATCH" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$PATCH" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool PATCH=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool PATCH=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for PATCH" >&5
-$as_echo_n "checking for PATCH... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool PATCH=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
- # Check if it's GNU time
- IS_GNU_TIME=`$TIME --version 2>&1 | $GREP 'GNU time'`
- if test "x$IS_GNU_TIME" != x; then
- IS_GNU_TIME=yes
- else
- IS_GNU_TIME=no
- fi
-
-
- if test "x$OPENJDK_TARGET_OS" = "xmacosx"; then
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${DSYMUTIL+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in dsymutil
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_DSYMUTIL+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $DSYMUTIL in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_DSYMUTIL="$DSYMUTIL" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_DSYMUTIL="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-DSYMUTIL=$ac_cv_path_DSYMUTIL
-if test -n "$DSYMUTIL"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5
-$as_echo "$DSYMUTIL" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$DSYMUTIL" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !DSYMUTIL! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!DSYMUTIL!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xDSYMUTIL" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of DSYMUTIL from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of DSYMUTIL from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in dsymutil
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_DSYMUTIL+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $DSYMUTIL in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_DSYMUTIL="$DSYMUTIL" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_DSYMUTIL="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-DSYMUTIL=$ac_cv_path_DSYMUTIL
-if test -n "$DSYMUTIL"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5
-$as_echo "$DSYMUTIL" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$DSYMUTIL" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$DSYMUTIL" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool DSYMUTIL= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool DSYMUTIL= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for DSYMUTIL" >&5
-$as_echo_n "checking for DSYMUTIL... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$DSYMUTIL"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool DSYMUTIL=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool DSYMUTIL=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_DSYMUTIL+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $DSYMUTIL in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_DSYMUTIL="$DSYMUTIL" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_DSYMUTIL="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-DSYMUTIL=$ac_cv_path_DSYMUTIL
-if test -n "$DSYMUTIL"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5
-$as_echo "$DSYMUTIL" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$DSYMUTIL" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool DSYMUTIL=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool DSYMUTIL=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for DSYMUTIL" >&5
-$as_echo_n "checking for DSYMUTIL... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool DSYMUTIL=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
- if test "x$DSYMUTIL" = x; then
- as_fn_error $? "Could not find required tool for DSYMUTIL" "$LINENO" 5
- fi
-
-
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${XATTR+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in xattr
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_XATTR+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $XATTR in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_XATTR="$XATTR" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_XATTR="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-XATTR=$ac_cv_path_XATTR
-if test -n "$XATTR"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $XATTR" >&5
-$as_echo "$XATTR" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$XATTR" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !XATTR! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!XATTR!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xXATTR" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of XATTR from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of XATTR from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in xattr
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_XATTR+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $XATTR in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_XATTR="$XATTR" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_XATTR="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-XATTR=$ac_cv_path_XATTR
-if test -n "$XATTR"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $XATTR" >&5
-$as_echo "$XATTR" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$XATTR" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$XATTR" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool XATTR= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool XATTR= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for XATTR" >&5
-$as_echo_n "checking for XATTR... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$XATTR"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool XATTR=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool XATTR=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_XATTR+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $XATTR in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_XATTR="$XATTR" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_XATTR="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-XATTR=$ac_cv_path_XATTR
-if test -n "$XATTR"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $XATTR" >&5
-$as_echo "$XATTR" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$XATTR" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool XATTR=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool XATTR=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for XATTR" >&5
-$as_echo_n "checking for XATTR... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool XATTR=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
- if test "x$XATTR" = x; then
- as_fn_error $? "Could not find required tool for XATTR" "$LINENO" 5
- fi
-
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${CODESIGN+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in codesign
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_CODESIGN+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $CODESIGN in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_CODESIGN="$CODESIGN" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_CODESIGN="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-CODESIGN=$ac_cv_path_CODESIGN
-if test -n "$CODESIGN"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CODESIGN" >&5
-$as_echo "$CODESIGN" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$CODESIGN" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !CODESIGN! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!CODESIGN!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xCODESIGN" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of CODESIGN from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of CODESIGN from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in codesign
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_CODESIGN+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $CODESIGN in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_CODESIGN="$CODESIGN" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_CODESIGN="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-CODESIGN=$ac_cv_path_CODESIGN
-if test -n "$CODESIGN"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CODESIGN" >&5
-$as_echo "$CODESIGN" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$CODESIGN" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$CODESIGN" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool CODESIGN= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool CODESIGN= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CODESIGN" >&5
-$as_echo_n "checking for CODESIGN... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$CODESIGN"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool CODESIGN=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool CODESIGN=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_CODESIGN+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $CODESIGN in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_CODESIGN="$CODESIGN" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_CODESIGN="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-CODESIGN=$ac_cv_path_CODESIGN
-if test -n "$CODESIGN"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CODESIGN" >&5
-$as_echo "$CODESIGN" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$CODESIGN" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool CODESIGN=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool CODESIGN=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CODESIGN" >&5
-$as_echo_n "checking for CODESIGN... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool CODESIGN=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
- if test "x$CODESIGN" != "x"; then
- # Verify that the openjdk_codesign certificate is present
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if openjdk_codesign certificate is present" >&5
-$as_echo_n "checking if openjdk_codesign certificate is present... " >&6; }
- $RM codesign-testfile
- $TOUCH codesign-testfile
- $CODESIGN -s openjdk_codesign codesign-testfile 2>&5 >&5 || CODESIGN=
- $RM codesign-testfile
- if test "x$CODESIGN" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
- fi
- fi
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${SETFILE+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in SetFile
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_SETFILE+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $SETFILE in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_SETFILE="$SETFILE" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_SETFILE="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-SETFILE=$ac_cv_path_SETFILE
-if test -n "$SETFILE"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $SETFILE" >&5
-$as_echo "$SETFILE" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$SETFILE" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !SETFILE! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!SETFILE!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xSETFILE" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of SETFILE from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of SETFILE from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in SetFile
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_SETFILE+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $SETFILE in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_SETFILE="$SETFILE" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_SETFILE="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-SETFILE=$ac_cv_path_SETFILE
-if test -n "$SETFILE"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $SETFILE" >&5
-$as_echo "$SETFILE" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$SETFILE" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$SETFILE" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool SETFILE= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool SETFILE= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for SETFILE" >&5
-$as_echo_n "checking for SETFILE... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$SETFILE"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool SETFILE=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool SETFILE=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_SETFILE+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $SETFILE in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_SETFILE="$SETFILE" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_SETFILE="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-SETFILE=$ac_cv_path_SETFILE
-if test -n "$SETFILE"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $SETFILE" >&5
-$as_echo "$SETFILE" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$SETFILE" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool SETFILE=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool SETFILE=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for SETFILE" >&5
-$as_echo_n "checking for SETFILE... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool SETFILE=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
- if test "x$SETFILE" = x; then
- as_fn_error $? "Could not find required tool for SETFILE" "$LINENO" 5
- fi
-
-
- fi
-
-
- # Check bash version
- # Extra [ ] to stop m4 mangling
- BASH_VER=`$BASH --version | $SED -n -e 's/^.*bash.*ersion *\([0-9.]*\).*$/\1/ p'`
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking bash version" >&5
-$as_echo_n "checking bash version... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BASH_VER" >&5
-$as_echo "$BASH_VER" >&6; }
-
- BASH_MAJOR=`$ECHO $BASH_VER | $CUT -d . -f 1`
- BASH_MINOR=`$ECHO $BASH_VER | $CUT -d . -f 2`
- if test $BASH_MAJOR -lt 3 || (test $BASH_MAJOR -eq 3 && test $BASH_MINOR -lt 2); then
- as_fn_error $? "bash version 3.2 or better is required" "$LINENO" 5
- fi
-
- # Test if bash supports pipefail.
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if bash supports pipefail" >&5
-$as_echo_n "checking if bash supports pipefail... " >&6; }
- if ${BASH} -c 'set -o pipefail'; then
- BASH_ARGS="$BASH_ARGS -o pipefail"
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- fi
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if bash supports errexit (-e)" >&5
-$as_echo_n "checking if bash supports errexit (-e)... " >&6; }
- if ${BASH} -e -c 'true'; then
- BASH_ARGS="$BASH_ARGS -e"
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- fi
-
-
-
-
-# Check if pkg-config is available.
-
-
-if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args.
-set dummy ${ac_tool_prefix}pkg-config; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_PKG_CONFIG+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $PKG_CONFIG in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-PKG_CONFIG=$ac_cv_path_PKG_CONFIG
-if test -n "$PKG_CONFIG"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PKG_CONFIG" >&5
-$as_echo "$PKG_CONFIG" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_path_PKG_CONFIG"; then
- ac_pt_PKG_CONFIG=$PKG_CONFIG
- # Extract the first word of "pkg-config", so it can be a program name with args.
-set dummy pkg-config; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_ac_pt_PKG_CONFIG+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $ac_pt_PKG_CONFIG in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG
-if test -n "$ac_pt_PKG_CONFIG"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_PKG_CONFIG" >&5
-$as_echo "$ac_pt_PKG_CONFIG" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
- if test "x$ac_pt_PKG_CONFIG" = x; then
- PKG_CONFIG=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- PKG_CONFIG=$ac_pt_PKG_CONFIG
- fi
-else
- PKG_CONFIG="$ac_cv_path_PKG_CONFIG"
-fi
-
-fi
-if test -n "$PKG_CONFIG"; then
- _pkg_min_version=0.9.0
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking pkg-config is at least version $_pkg_min_version" >&5
-$as_echo_n "checking pkg-config is at least version $_pkg_min_version... " >&6; }
- if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- PKG_CONFIG=""
- fi
-
-fi
-
-# After basic tools have been setup, we can check build os specific details.
-
- ###############################################################################
-
- # Note that this is the build platform OS version!
-
- OS_VERSION="`uname -r | ${SED} 's!\.! !g' | ${SED} 's!-! !g'`"
- OS_VERSION_MAJOR="`${ECHO} ${OS_VERSION} | ${CUT} -f 1 -d ' '`"
- OS_VERSION_MINOR="`${ECHO} ${OS_VERSION} | ${CUT} -f 2 -d ' '`"
- OS_VERSION_MICRO="`${ECHO} ${OS_VERSION} | ${CUT} -f 3 -d ' '`"
-
-
-
-
-
-# Misc basic settings
-
-
-# Check whether --with-default-make-target was given.
-if test "${with_default_make_target+set}" = set; then :
- withval=$with_default_make_target;
-fi
-
- if test "x$with_default_make_target" = "x" \
- || test "x$with_default_make_target" = "xyes"; then
- DEFAULT_MAKE_TARGET="exploded-image"
- elif test "x$with_default_make_target" = "xno"; then
- as_fn_error $? "--without-default-make-target is not a valid option" "$LINENO" 5
- else
- DEFAULT_MAKE_TARGET="$with_default_make_target"
- fi
-
-
-
-
-###############################################################################
-#
-# Determine OpenJDK variants, options and version numbers.
-#
-###############################################################################
-
-# We need build & target for this.
-
- # Should we build a JDK without a graphical UI?
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking headless only" >&5
-$as_echo_n "checking headless only... " >&6; }
- # Check whether --enable-headless-only was given.
-if test "${enable_headless_only+set}" = set; then :
- enableval=$enable_headless_only;
-fi
-
-
- if test "x$enable_headless_only" = "xyes"; then
- ENABLE_HEADLESS_ONLY="true"
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
- elif test "x$enable_headless_only" = "xno"; then
- ENABLE_HEADLESS_ONLY="false"
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- elif test "x$enable_headless_only" = "x"; then
- ENABLE_HEADLESS_ONLY="false"
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- else
- as_fn_error $? "--enable-headless-only can only take yes or no" "$LINENO" 5
- fi
-
-
-
- # Should we build the complete docs, or just a lightweight version?
- # Check whether --enable-full-docs was given.
-if test "${enable_full_docs+set}" = set; then :
- enableval=$enable_full_docs;
-fi
-
-
- # Verify dependencies
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for graphviz dot" >&5
-$as_echo_n "checking for graphviz dot... " >&6; }
- if test "x$DOT" != "x"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, cannot generate full docs" >&5
-$as_echo "no, cannot generate full docs" >&6; }
- FULL_DOCS_DEP_MISSING=true
- fi
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for pandoc" >&5
-$as_echo_n "checking for pandoc... " >&6; }
- if test "x$PANDOC" != "x"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, cannot generate full docs" >&5
-$as_echo "no, cannot generate full docs" >&6; }
- FULL_DOCS_DEP_MISSING=true
- fi
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking full docs" >&5
-$as_echo_n "checking full docs... " >&6; }
- if test "x$enable_full_docs" = xyes; then
- if test "x$FULL_DOCS_DEP_MISSING" = "xtrue"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, missing dependencies" >&5
-$as_echo "no, missing dependencies" >&6; }
-
- # Print a helpful message on how to acquire the necessary build dependency.
- # dot is the help tag: freetype, cups, alsa etc
- MISSING_DEPENDENCY=dot
-
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- cygwin_help $MISSING_DEPENDENCY
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- msys_help $MISSING_DEPENDENCY
- else
- PKGHANDLER_COMMAND=
-
- case $PKGHANDLER in
- apt-get)
- apt_help $MISSING_DEPENDENCY ;;
- yum)
- yum_help $MISSING_DEPENDENCY ;;
- brew)
- brew_help $MISSING_DEPENDENCY ;;
- port)
- port_help $MISSING_DEPENDENCY ;;
- pkgutil)
- pkgutil_help $MISSING_DEPENDENCY ;;
- pkgadd)
- pkgadd_help $MISSING_DEPENDENCY ;;
- esac
-
- if test "x$PKGHANDLER_COMMAND" != x; then
- HELP_MSG="You might be able to fix this by running '$PKGHANDLER_COMMAND'."
- fi
- fi
-
- as_fn_error $? "Cannot enable full docs with missing dependencies. See above. $HELP_MSG" "$LINENO" 5
- else
- ENABLE_FULL_DOCS=true
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes, forced" >&5
-$as_echo "yes, forced" >&6; }
- fi
- elif test "x$enable_full_docs" = xno; then
- ENABLE_FULL_DOCS=false
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, forced" >&5
-$as_echo "no, forced" >&6; }
- elif test "x$enable_full_docs" = x; then
- # Check for prerequisites
- if test "x$FULL_DOCS_DEP_MISSING" = xtrue; then
- ENABLE_FULL_DOCS=false
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, missing dependencies" >&5
-$as_echo "no, missing dependencies" >&6; }
- else
- ENABLE_FULL_DOCS=true
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes, dependencies present" >&5
-$as_echo "yes, dependencies present" >&6; }
- fi
- else
- as_fn_error $? "--enable-full-docs can only take yes or no" "$LINENO" 5
- fi
-
-
-
- # Choose cacerts source file
-
-# Check whether --with-cacerts-file was given.
-if test "${with_cacerts_file+set}" = set; then :
- withval=$with_cacerts_file;
-fi
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for cacerts file" >&5
-$as_echo_n "checking for cacerts file... " >&6; }
- if test "x$with_cacerts_file" == x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: default" >&5
-$as_echo "default" >&6; }
- else
- CACERTS_FILE=$with_cacerts_file
- if test ! -f "$CACERTS_FILE"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: fail" >&5
-$as_echo "fail" >&6; }
- as_fn_error $? "Specified cacerts file \"$CACERTS_FILE\" does not exist" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CACERTS_FILE" >&5
-$as_echo "$CACERTS_FILE" >&6; }
- fi
-
-
- # Enable or disable unlimited crypto
- # Check whether --enable-unlimited-crypto was given.
-if test "${enable_unlimited_crypto+set}" = set; then :
- enableval=$enable_unlimited_crypto;
-else
- enable_unlimited_crypto=yes
-fi
-
- if test "x$enable_unlimited_crypto" = "xyes"; then
- UNLIMITED_CRYPTO=true
- else
- UNLIMITED_CRYPTO=false
- fi
-
-
- # Should we build the serviceability agent (SA)?
- INCLUDE_SA=true
- if [[ " $JVM_VARIANTS " =~ " zero " ]] ; then
- INCLUDE_SA=false
- fi
- if test "x$OPENJDK_TARGET_OS" = xaix ; then
- INCLUDE_SA=false
- fi
-
-
- # Compress jars
- COMPRESS_JARS=false
-
-
-
- # Setup default copyright year. Mostly overridden when building close to a new year.
-
-# Check whether --with-copyright-year was given.
-if test "${with_copyright_year+set}" = set; then :
- withval=$with_copyright_year;
-fi
-
- if test "x$with_copyright_year" = xyes; then
- as_fn_error $? "Copyright year must have a value" "$LINENO" 5
- elif test "x$with_copyright_year" != x; then
- COPYRIGHT_YEAR="$with_copyright_year"
- else
- COPYRIGHT_YEAR=`$DATE +'%Y'`
- fi
-
-
-
- # Check whether --enable-keep-packaged-modules was given.
-if test "${enable_keep_packaged_modules+set}" = set; then :
- enableval=$enable_keep_packaged_modules;
-fi
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if packaged modules are kept" >&5
-$as_echo_n "checking if packaged modules are kept... " >&6; }
- if test "x$enable_keep_packaged_modules" = "xyes"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
- JLINK_KEEP_PACKAGED_MODULES=true
- elif test "x$enable_keep_packaged_modules" = "xno"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- JLINK_KEEP_PACKAGED_MODULES=false
- elif test "x$enable_keep_packaged_modules" = "x"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes (default)" >&5
-$as_echo "yes (default)" >&6; }
- JLINK_KEEP_PACKAGED_MODULES=true
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: error" >&5
-$as_echo "error" >&6; }
- as_fn_error $? "--enable-keep-packaged-modules accepts no argument" "$LINENO" 5
- fi
-
-
-
-
- # Warn user that old version arguments are deprecated.
-
-
-# Check whether --with-milestone was given.
-if test "${with_milestone+set}" = set; then :
- withval=$with_milestone; { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Option --with-milestone is deprecated and will be ignored." >&5
-$as_echo "$as_me: WARNING: Option --with-milestone is deprecated and will be ignored." >&2;}
-fi
-
-
-
-
-# Check whether --with-update-version was given.
-if test "${with_update_version+set}" = set; then :
- withval=$with_update_version; { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Option --with-update-version is deprecated and will be ignored." >&5
-$as_echo "$as_me: WARNING: Option --with-update-version is deprecated and will be ignored." >&2;}
-fi
-
-
-
-
-# Check whether --with-user-release-suffix was given.
-if test "${with_user_release_suffix+set}" = set; then :
- withval=$with_user_release_suffix; { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Option --with-user-release-suffix is deprecated and will be ignored." >&5
-$as_echo "$as_me: WARNING: Option --with-user-release-suffix is deprecated and will be ignored." >&2;}
-fi
-
-
-
-
-# Check whether --with-build-number was given.
-if test "${with_build_number+set}" = set; then :
- withval=$with_build_number; { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Option --with-build-number is deprecated and will be ignored." >&5
-$as_echo "$as_me: WARNING: Option --with-build-number is deprecated and will be ignored." >&2;}
-fi
-
-
-
-
-# Check whether --with-version-major was given.
-if test "${with_version_major+set}" = set; then :
- withval=$with_version_major; { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Option --with-version-major is deprecated and will be ignored." >&5
-$as_echo "$as_me: WARNING: Option --with-version-major is deprecated and will be ignored." >&2;}
-fi
-
-
-
-
-# Check whether --with-version-minor was given.
-if test "${with_version_minor+set}" = set; then :
- withval=$with_version_minor; { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Option --with-version-minor is deprecated and will be ignored." >&5
-$as_echo "$as_me: WARNING: Option --with-version-minor is deprecated and will be ignored." >&2;}
-fi
-
-
-
-
-# Check whether --with-version-security was given.
-if test "${with_version_security+set}" = set; then :
- withval=$with_version_security; { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Option --with-version-security is deprecated and will be ignored." >&5
-$as_echo "$as_me: WARNING: Option --with-version-security is deprecated and will be ignored." >&2;}
-fi
-
-
-
- # Source the version numbers file
- . $AUTOCONF_DIR/version-numbers
-
- # Some non-version number information is set in that file
-
-
-
-
-
-
-
-
- # The vendor name, if any
-
-# Check whether --with-vendor-name was given.
-if test "${with_vendor_name+set}" = set; then :
- withval=$with_vendor_name;
-fi
-
- if test "x$with_vendor_name" = xyes; then
- as_fn_error $? "--with-vendor-name must have a value" "$LINENO" 5
- elif ! [[ $with_vendor_name =~ ^[[:print:]]*$ ]] ; then
- as_fn_error $? "--with--vendor-name contains non-printing characters: $with_vendor_name" "$LINENO" 5
- else
- COMPANY_NAME="$with_vendor_name"
- fi
-
-
- # Override version from arguments
-
- # If --with-version-string is set, process it first. It is possible to
- # override parts with more specific flags, since these are processed later.
-
-# Check whether --with-version-string was given.
-if test "${with_version_string+set}" = set; then :
- withval=$with_version_string;
-fi
-
- if test "x$with_version_string" = xyes; then
- as_fn_error $? "--with-version-string must have a value" "$LINENO" 5
- elif test "x$with_version_string" != x; then
- # Additional [] needed to keep m4 from mangling shell constructs.
- if [[ $with_version_string =~ ^([0-9]+)(\.([0-9]+))?(\.([0-9]+))?(\.([0-9]+))?(-([a-zA-Z]+))?((\+)([0-9]+)?(-([-a-zA-Z0-9.]+))?)?$ ]] ; then
- VERSION_FEATURE=${BASH_REMATCH[1]}
- VERSION_INTERIM=${BASH_REMATCH[3]}
- VERSION_UPDATE=${BASH_REMATCH[5]}
- VERSION_PATCH=${BASH_REMATCH[7]}
- VERSION_PRE=${BASH_REMATCH[9]}
- version_plus_separator=${BASH_REMATCH[11]}
- VERSION_BUILD=${BASH_REMATCH[12]}
- VERSION_OPT=${BASH_REMATCH[14]}
- # Unspecified numerical fields are interpreted as 0.
- if test "x$VERSION_INTERIM" = x; then
- VERSION_INTERIM=0
- fi
- if test "x$VERSION_UPDATE" = x; then
- VERSION_UPDATE=0
- fi
- if test "x$VERSION_PATCH" = x; then
- VERSION_PATCH=0
- fi
- if test "x$version_plus_separator" != x \
- && test "x$VERSION_BUILD$VERSION_OPT" = x; then
- as_fn_error $? "Version string contains + but both 'BUILD' and 'OPT' are missing" "$LINENO" 5
- fi
- # Stop the version part process from setting default values.
- # We still allow them to explicitly override though.
- NO_DEFAULT_VERSION_PARTS=true
- else
- as_fn_error $? "--with-version-string fails to parse as a valid version string: $with_version_string" "$LINENO" 5
- fi
- fi
-
-
-# Check whether --with-version-pre was given.
-if test "${with_version_pre+set}" = set; then :
- withval=$with_version_pre; with_version_pre_present=true
-else
- with_version_pre_present=false
-fi
-
-
- if test "x$with_version_pre_present" = xtrue; then
- if test "x$with_version_pre" = xyes; then
- as_fn_error $? "--with-version-pre must have a value" "$LINENO" 5
- elif test "x$with_version_pre" = xno; then
- # Interpret --without-* as empty string instead of the literal "no"
- VERSION_PRE=
- else
- # Only [a-zA-Z] is allowed in the VERSION_PRE. Outer [ ] to quote m4.
- VERSION_PRE=`$ECHO "$with_version_pre" | $TR -c -d '[a-z][A-Z]'`
- if test "x$VERSION_PRE" != "x$with_version_pre"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: --with-version-pre value has been sanitized from '$with_version_pre' to '$VERSION_PRE'" >&5
-$as_echo "$as_me: WARNING: --with-version-pre value has been sanitized from '$with_version_pre' to '$VERSION_PRE'" >&2;}
- fi
- fi
- else
- if test "x$NO_DEFAULT_VERSION_PARTS" != xtrue; then
- # Default is to use "internal" as pre
- VERSION_PRE="internal"
- fi
- fi
-
-
-# Check whether --with-version-opt was given.
-if test "${with_version_opt+set}" = set; then :
- withval=$with_version_opt; with_version_opt_present=true
-else
- with_version_opt_present=false
-fi
-
-
- if test "x$with_version_opt_present" = xtrue; then
- if test "x$with_version_opt" = xyes; then
- as_fn_error $? "--with-version-opt must have a value" "$LINENO" 5
- elif test "x$with_version_opt" = xno; then
- # Interpret --without-* as empty string instead of the literal "no"
- VERSION_OPT=
- else
- # Only [-.a-zA-Z0-9] is allowed in the VERSION_OPT. Outer [ ] to quote m4.
- VERSION_OPT=`$ECHO "$with_version_opt" | $TR -c -d '[a-z][A-Z][0-9].-'`
- if test "x$VERSION_OPT" != "x$with_version_opt"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: --with-version-opt value has been sanitized from '$with_version_opt' to '$VERSION_OPT'" >&5
-$as_echo "$as_me: WARNING: --with-version-opt value has been sanitized from '$with_version_opt' to '$VERSION_OPT'" >&2;}
- fi
- fi
- else
- if test "x$NO_DEFAULT_VERSION_PARTS" != xtrue; then
- # Default is to calculate a string like this 'adhoc../System/Library/Frameworks
- SYSROOT_CFLAGS="$SYSROOT_CFLAGS -iframework $SYSROOT/System/Library/Frameworks"
- SYSROOT_LDFLAGS="$SYSROOT_LDFLAGS -iframework $SYSROOT/System/Library/Frameworks"
- # These always need to be set, or we can't find the frameworks embedded in JavaVM.framework
- # set this here so it doesn't have to be peppered throughout the forest
- SYSROOT_CFLAGS="$SYSROOT_CFLAGS -F $SYSROOT/System/Library/Frameworks/JavaVM.framework/Frameworks"
- SYSROOT_LDFLAGS="$SYSROOT_LDFLAGS -F $SYSROOT/System/Library/Frameworks/JavaVM.framework/Frameworks"
- fi
-
-
-
-
-
-# Then detect the actual binaries needed
-
- # FIXME: Is this needed?
- ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
-
- # Store the CFLAGS etc passed to the configure script.
- ORG_CFLAGS="$CFLAGS"
- ORG_CXXFLAGS="$CXXFLAGS"
-
- # autoconf magic only relies on PATH, so update it if tools dir is specified
- OLD_PATH="$PATH"
-
- # On Windows, we need to detect the visual studio installation first.
- # This will change the PATH, but we need to keep that new PATH even
- # after toolchain detection is done, since the compiler (on x86) uses
- # it for DLL resolution in runtime.
- if test "x$OPENJDK_BUILD_OS" = "xwindows" \
- && test "x$TOOLCHAIN_TYPE" = "xmicrosoft"; then
-
- # Store path to cygwin link.exe to help excluding it when searching for
- # VS linker. This must be done before changing the PATH when looking for VS.
- # Extract the first word of "link", so it can be a program name with args.
-set dummy link; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_CYGWIN_LINK+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $CYGWIN_LINK in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_CYGWIN_LINK="$CYGWIN_LINK" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_CYGWIN_LINK="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-CYGWIN_LINK=$ac_cv_path_CYGWIN_LINK
-if test -n "$CYGWIN_LINK"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CYGWIN_LINK" >&5
-$as_echo "$CYGWIN_LINK" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$CYGWIN_LINK" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if the first found link.exe is actually the Cygwin link tool" >&5
-$as_echo_n "checking if the first found link.exe is actually the Cygwin link tool... " >&6; }
- "$CYGWIN_LINK" --version > /dev/null
- if test $? -eq 0 ; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- # This might be the VS linker. Don't exclude it later on.
- CYGWIN_LINK=""
- fi
- fi
-
- # First-hand choice is to locate and run the vsvars bat file.
-
-
-# Check whether --with-toolchain-version was given.
-if test "${with_toolchain_version+set}" = set; then :
- withval=$with_toolchain_version;
-fi
-
-
- if test "x$with_toolchain_version" = xlist; then
- # List all toolchains
- { $as_echo "$as_me:${as_lineno-$LINENO}: The following toolchain versions are valid on this platform:" >&5
-$as_echo "$as_me: The following toolchain versions are valid on this platform:" >&6;}
- for version in $VALID_VS_VERSIONS; do
- eval VS_DESCRIPTION=\${VS_DESCRIPTION_$version}
- $PRINTF " %-10s %s\n" $version "$VS_DESCRIPTION"
- done
-
- exit 0
- elif test "x$DEVKIT_VS_VERSION" != x; then
- VS_VERSION=$DEVKIT_VS_VERSION
- TOOLCHAIN_VERSION=$VS_VERSION
- eval VS_DESCRIPTION="\${VS_DESCRIPTION_${VS_VERSION}}"
- eval VS_VERSION_INTERNAL="\${VS_VERSION_INTERNAL_${VS_VERSION}}"
- eval MSVCR_NAME="\${VS_MSVCR_${VS_VERSION}}"
- eval MSVCP_NAME="\${VS_MSVCP_${VS_VERSION}}"
- eval PLATFORM_TOOLSET="\${VS_VS_PLATFORM_NAME_${VS_VERSION}}"
- VS_PATH="$TOOLCHAIN_PATH:$PATH"
-
- # Convert DEVKIT_VS_INCLUDE into windows style VS_INCLUDE so that it
- # can still be exported as INCLUDE for compiler invocations without
- # SYSROOT_CFLAGS
- OLDIFS="$IFS"
- IFS=";"
- for i in $DEVKIT_VS_INCLUDE; do
- ipath=$i
-
- unix_path="$ipath"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- windows_path=`$CYGPATH -m "$unix_path"`
- ipath="$windows_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- windows_path=`cmd //c echo $unix_path`
- ipath="$windows_path"
- fi
-
- VS_INCLUDE="$VS_INCLUDE;$ipath"
- done
- # Convert DEVKIT_VS_LIB into VS_LIB so that it can still be exported
- # as LIB for compiler invocations without SYSROOT_LDFLAGS
- for i in $DEVKIT_VS_LIB; do
- libpath=$i
-
- unix_path="$libpath"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- windows_path=`$CYGPATH -m "$unix_path"`
- libpath="$windows_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- windows_path=`cmd //c echo $unix_path`
- libpath="$windows_path"
- fi
-
- VS_LIB="$VS_LIB;$libpath"
- done
- IFS="$OLDIFS"
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found devkit $VS_DESCRIPTION" >&5
-$as_echo "$as_me: Found devkit $VS_DESCRIPTION" >&6;}
-
- elif test "x$with_toolchain_version" != x; then
- # User override; check that it is valid
- if test "x${VALID_VS_VERSIONS/$with_toolchain_version/}" = "x${VALID_VS_VERSIONS}"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Visual Studio version $with_toolchain_version is not valid." >&5
-$as_echo "$as_me: Visual Studio version $with_toolchain_version is not valid." >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: Valid Visual Studio versions: $VALID_VS_VERSIONS." >&5
-$as_echo "$as_me: Valid Visual Studio versions: $VALID_VS_VERSIONS." >&6;}
- as_fn_error $? "Cannot continue." "$LINENO" 5
- fi
- VS_VERSIONS_PROBE_LIST="$with_toolchain_version"
- else
- # No flag given, use default
- VS_VERSIONS_PROBE_LIST="$VALID_VS_VERSIONS"
- fi
-
- for VS_VERSION in $VS_VERSIONS_PROBE_LIST; do
-
- VS_VERSION="$VS_VERSION"
- eval VS_COMNTOOLS_VAR="\${VS_ENVVAR_${VS_VERSION}}"
- eval VS_COMNTOOLS="\$${VS_COMNTOOLS_VAR}"
- eval VS_INSTALL_DIR="\${VS_VS_INSTALLDIR_${VS_VERSION}}"
- eval SDK_INSTALL_DIR="\${VS_SDK_INSTALLDIR_${VS_VERSION}}"
-
- # When using --with-tools-dir, assume it points to the correct and default
- # version of Visual Studio or that --with-toolchain-version was also set.
- if test "x$with_tools_dir" != x; then
-
- if test "x$VS_ENV_CMD" = x; then
- VS_VERSION="${VS_VERSION}"
- VS_BASE="$with_tools_dir/../.."
- METHOD="--with-tools-dir"
-
- if test "x$OPENJDK_TARGET_CPU_BITS" = x32; then
- VCVARSFILE="vc/bin/vcvars32.bat"
- else
- VCVARSFILE="vc/bin/amd64/vcvars64.bat"
- fi
-
-
- windows_path="$VS_BASE"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- VS_BASE="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- VS_BASE="$unix_path"
- fi
-
- if test -d "$VS_BASE"; then
- if test -f "$VS_BASE/$VCVARSFILE"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found Visual Studio installation at $VS_BASE using $METHOD" >&5
-$as_echo "$as_me: Found Visual Studio installation at $VS_BASE using $METHOD" >&6;}
- VS_ENV_CMD="$VS_BASE/$VCVARSFILE"
- # PLATFORM_TOOLSET is used during the compilation of the freetype sources (see
- # 'LIB_BUILD_FREETYPE' in libraries.m4) and must be one of 'v100', 'v110' or 'v120' for VS 2010, 2012 or VS2013
- eval PLATFORM_TOOLSET="\${VS_VS_PLATFORM_NAME_${VS_VERSION}}"
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found Visual Studio installation at $VS_BASE using $METHOD" >&5
-$as_echo "$as_me: Found Visual Studio installation at $VS_BASE using $METHOD" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: Warning: $VCVARSFILE is missing, this is probably Visual Studio Express. Ignoring" >&5
-$as_echo "$as_me: Warning: $VCVARSFILE is missing, this is probably Visual Studio Express. Ignoring" >&6;}
- fi
- fi
- fi
-
-
- if test "x$VS_ENV_CMD" = x; then
- VS_VERSION="${VS_VERSION}"
- VS_BASE="$with_tools_dir/../../.."
- METHOD="--with-tools-dir"
-
- if test "x$OPENJDK_TARGET_CPU_BITS" = x32; then
- VCVARSFILE="vc/bin/vcvars32.bat"
- else
- VCVARSFILE="vc/bin/amd64/vcvars64.bat"
- fi
-
-
- windows_path="$VS_BASE"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- VS_BASE="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- VS_BASE="$unix_path"
- fi
-
- if test -d "$VS_BASE"; then
- if test -f "$VS_BASE/$VCVARSFILE"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found Visual Studio installation at $VS_BASE using $METHOD" >&5
-$as_echo "$as_me: Found Visual Studio installation at $VS_BASE using $METHOD" >&6;}
- VS_ENV_CMD="$VS_BASE/$VCVARSFILE"
- # PLATFORM_TOOLSET is used during the compilation of the freetype sources (see
- # 'LIB_BUILD_FREETYPE' in libraries.m4) and must be one of 'v100', 'v110' or 'v120' for VS 2010, 2012 or VS2013
- eval PLATFORM_TOOLSET="\${VS_VS_PLATFORM_NAME_${VS_VERSION}}"
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found Visual Studio installation at $VS_BASE using $METHOD" >&5
-$as_echo "$as_me: Found Visual Studio installation at $VS_BASE using $METHOD" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: Warning: $VCVARSFILE is missing, this is probably Visual Studio Express. Ignoring" >&5
-$as_echo "$as_me: Warning: $VCVARSFILE is missing, this is probably Visual Studio Express. Ignoring" >&6;}
- fi
- fi
- fi
-
- if test "x$VS_ENV_CMD" = x; then
- # Having specified an argument which is incorrect will produce an instant failure;
- # we should not go on looking
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path given by --with-tools-dir does not contain a valid" >&5
-$as_echo "$as_me: The path given by --with-tools-dir does not contain a valid" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: Visual Studio installation. Please point to the VC/bin or VC/bin/amd64" >&5
-$as_echo "$as_me: Visual Studio installation. Please point to the VC/bin or VC/bin/amd64" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: directory within the Visual Studio installation" >&5
-$as_echo "$as_me: directory within the Visual Studio installation" >&6;}
- as_fn_error $? "Cannot locate a valid Visual Studio installation" "$LINENO" 5
- fi
- fi
-
- VS_ENV_CMD=""
- VS_ENV_ARGS=""
-
- if test "x$VS_COMNTOOLS" != x; then
-
- if test "x$VS_ENV_CMD" = x; then
- VS_VERSION="${VS_VERSION}"
- VS_BASE="$VS_COMNTOOLS/../.."
- METHOD="$VS_COMNTOOLS_VAR variable"
-
- if test "x$OPENJDK_TARGET_CPU_BITS" = x32; then
- VCVARSFILE="vc/bin/vcvars32.bat"
- else
- VCVARSFILE="vc/bin/amd64/vcvars64.bat"
- fi
-
-
- windows_path="$VS_BASE"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- VS_BASE="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- VS_BASE="$unix_path"
- fi
-
- if test -d "$VS_BASE"; then
- if test -f "$VS_BASE/$VCVARSFILE"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found Visual Studio installation at $VS_BASE using $METHOD" >&5
-$as_echo "$as_me: Found Visual Studio installation at $VS_BASE using $METHOD" >&6;}
- VS_ENV_CMD="$VS_BASE/$VCVARSFILE"
- # PLATFORM_TOOLSET is used during the compilation of the freetype sources (see
- # 'LIB_BUILD_FREETYPE' in libraries.m4) and must be one of 'v100', 'v110' or 'v120' for VS 2010, 2012 or VS2013
- eval PLATFORM_TOOLSET="\${VS_VS_PLATFORM_NAME_${VS_VERSION}}"
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found Visual Studio installation at $VS_BASE using $METHOD" >&5
-$as_echo "$as_me: Found Visual Studio installation at $VS_BASE using $METHOD" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: Warning: $VCVARSFILE is missing, this is probably Visual Studio Express. Ignoring" >&5
-$as_echo "$as_me: Warning: $VCVARSFILE is missing, this is probably Visual Studio Express. Ignoring" >&6;}
- fi
- fi
- fi
-
- fi
- if test "x$PROGRAMFILES" != x; then
-
- if test "x$VS_ENV_CMD" = x; then
- VS_VERSION="${VS_VERSION}"
- VS_BASE="$PROGRAMFILES/$VS_INSTALL_DIR"
- METHOD="well-known name"
-
- if test "x$OPENJDK_TARGET_CPU_BITS" = x32; then
- VCVARSFILE="vc/bin/vcvars32.bat"
- else
- VCVARSFILE="vc/bin/amd64/vcvars64.bat"
- fi
-
-
- windows_path="$VS_BASE"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- VS_BASE="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- VS_BASE="$unix_path"
- fi
-
- if test -d "$VS_BASE"; then
- if test -f "$VS_BASE/$VCVARSFILE"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found Visual Studio installation at $VS_BASE using $METHOD" >&5
-$as_echo "$as_me: Found Visual Studio installation at $VS_BASE using $METHOD" >&6;}
- VS_ENV_CMD="$VS_BASE/$VCVARSFILE"
- # PLATFORM_TOOLSET is used during the compilation of the freetype sources (see
- # 'LIB_BUILD_FREETYPE' in libraries.m4) and must be one of 'v100', 'v110' or 'v120' for VS 2010, 2012 or VS2013
- eval PLATFORM_TOOLSET="\${VS_VS_PLATFORM_NAME_${VS_VERSION}}"
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found Visual Studio installation at $VS_BASE using $METHOD" >&5
-$as_echo "$as_me: Found Visual Studio installation at $VS_BASE using $METHOD" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: Warning: $VCVARSFILE is missing, this is probably Visual Studio Express. Ignoring" >&5
-$as_echo "$as_me: Warning: $VCVARSFILE is missing, this is probably Visual Studio Express. Ignoring" >&6;}
- fi
- fi
- fi
-
- fi
- # Work around the insanely named ProgramFiles(x86) env variable
- PROGRAMFILES_X86="`env | $SED -n 's/^ProgramFiles(x86)=//p'`"
- if test "x$PROGRAMFILES_X86" != x; then
-
- if test "x$VS_ENV_CMD" = x; then
- VS_VERSION="${VS_VERSION}"
- VS_BASE="$PROGRAMFILES_X86/$VS_INSTALL_DIR"
- METHOD="well-known name"
-
- if test "x$OPENJDK_TARGET_CPU_BITS" = x32; then
- VCVARSFILE="vc/bin/vcvars32.bat"
- else
- VCVARSFILE="vc/bin/amd64/vcvars64.bat"
- fi
-
-
- windows_path="$VS_BASE"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- VS_BASE="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- VS_BASE="$unix_path"
- fi
-
- if test -d "$VS_BASE"; then
- if test -f "$VS_BASE/$VCVARSFILE"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found Visual Studio installation at $VS_BASE using $METHOD" >&5
-$as_echo "$as_me: Found Visual Studio installation at $VS_BASE using $METHOD" >&6;}
- VS_ENV_CMD="$VS_BASE/$VCVARSFILE"
- # PLATFORM_TOOLSET is used during the compilation of the freetype sources (see
- # 'LIB_BUILD_FREETYPE' in libraries.m4) and must be one of 'v100', 'v110' or 'v120' for VS 2010, 2012 or VS2013
- eval PLATFORM_TOOLSET="\${VS_VS_PLATFORM_NAME_${VS_VERSION}}"
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found Visual Studio installation at $VS_BASE using $METHOD" >&5
-$as_echo "$as_me: Found Visual Studio installation at $VS_BASE using $METHOD" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: Warning: $VCVARSFILE is missing, this is probably Visual Studio Express. Ignoring" >&5
-$as_echo "$as_me: Warning: $VCVARSFILE is missing, this is probably Visual Studio Express. Ignoring" >&6;}
- fi
- fi
- fi
-
- fi
-
- if test "x$VS_ENV_CMD" = x; then
- VS_VERSION="${VS_VERSION}"
- VS_BASE="C:/Program Files/$VS_INSTALL_DIR"
- METHOD="well-known name"
-
- if test "x$OPENJDK_TARGET_CPU_BITS" = x32; then
- VCVARSFILE="vc/bin/vcvars32.bat"
- else
- VCVARSFILE="vc/bin/amd64/vcvars64.bat"
- fi
-
-
- windows_path="$VS_BASE"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- VS_BASE="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- VS_BASE="$unix_path"
- fi
-
- if test -d "$VS_BASE"; then
- if test -f "$VS_BASE/$VCVARSFILE"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found Visual Studio installation at $VS_BASE using $METHOD" >&5
-$as_echo "$as_me: Found Visual Studio installation at $VS_BASE using $METHOD" >&6;}
- VS_ENV_CMD="$VS_BASE/$VCVARSFILE"
- # PLATFORM_TOOLSET is used during the compilation of the freetype sources (see
- # 'LIB_BUILD_FREETYPE' in libraries.m4) and must be one of 'v100', 'v110' or 'v120' for VS 2010, 2012 or VS2013
- eval PLATFORM_TOOLSET="\${VS_VS_PLATFORM_NAME_${VS_VERSION}}"
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found Visual Studio installation at $VS_BASE using $METHOD" >&5
-$as_echo "$as_me: Found Visual Studio installation at $VS_BASE using $METHOD" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: Warning: $VCVARSFILE is missing, this is probably Visual Studio Express. Ignoring" >&5
-$as_echo "$as_me: Warning: $VCVARSFILE is missing, this is probably Visual Studio Express. Ignoring" >&6;}
- fi
- fi
- fi
-
-
- if test "x$VS_ENV_CMD" = x; then
- VS_VERSION="${VS_VERSION}"
- VS_BASE="C:/Program Files (x86)/$VS_INSTALL_DIR"
- METHOD="well-known name"
-
- if test "x$OPENJDK_TARGET_CPU_BITS" = x32; then
- VCVARSFILE="vc/bin/vcvars32.bat"
- else
- VCVARSFILE="vc/bin/amd64/vcvars64.bat"
- fi
-
-
- windows_path="$VS_BASE"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- VS_BASE="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- VS_BASE="$unix_path"
- fi
-
- if test -d "$VS_BASE"; then
- if test -f "$VS_BASE/$VCVARSFILE"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found Visual Studio installation at $VS_BASE using $METHOD" >&5
-$as_echo "$as_me: Found Visual Studio installation at $VS_BASE using $METHOD" >&6;}
- VS_ENV_CMD="$VS_BASE/$VCVARSFILE"
- # PLATFORM_TOOLSET is used during the compilation of the freetype sources (see
- # 'LIB_BUILD_FREETYPE' in libraries.m4) and must be one of 'v100', 'v110' or 'v120' for VS 2010, 2012 or VS2013
- eval PLATFORM_TOOLSET="\${VS_VS_PLATFORM_NAME_${VS_VERSION}}"
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found Visual Studio installation at $VS_BASE using $METHOD" >&5
-$as_echo "$as_me: Found Visual Studio installation at $VS_BASE using $METHOD" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: Warning: $VCVARSFILE is missing, this is probably Visual Studio Express. Ignoring" >&5
-$as_echo "$as_me: Warning: $VCVARSFILE is missing, this is probably Visual Studio Express. Ignoring" >&6;}
- fi
- fi
- fi
-
-
- if test "x$SDK_INSTALL_DIR" != x; then
- if test "x$ProgramW6432" != x; then
-
- if test "x$VS_ENV_CMD" = x; then
- VS_VERSION="${VS_VERSION}"
- WIN_SDK_BASE="$ProgramW6432/$SDK_INSTALL_DIR"
- METHOD="well-known name"
-
- windows_path="$WIN_SDK_BASE"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- WIN_SDK_BASE="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- WIN_SDK_BASE="$unix_path"
- fi
-
- if test -d "$WIN_SDK_BASE"; then
- # There have been cases of partial or broken SDK installations. A missing
- # lib dir is not going to work.
- if test ! -d "$WIN_SDK_BASE/lib"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found Windows SDK installation at $WIN_SDK_BASE using $METHOD" >&5
-$as_echo "$as_me: Found Windows SDK installation at $WIN_SDK_BASE using $METHOD" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: Warning: Installation is broken, lib dir is missing. Ignoring" >&5
-$as_echo "$as_me: Warning: Installation is broken, lib dir is missing. Ignoring" >&6;}
- elif test -f "$WIN_SDK_BASE/Bin/SetEnv.Cmd"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found Windows SDK installation at $WIN_SDK_BASE using $METHOD" >&5
-$as_echo "$as_me: Found Windows SDK installation at $WIN_SDK_BASE using $METHOD" >&6;}
- VS_ENV_CMD="$WIN_SDK_BASE/Bin/SetEnv.Cmd"
- if test "x$OPENJDK_TARGET_CPU_BITS" = x32; then
- VS_ENV_ARGS="/x86"
- else
- VS_ENV_ARGS="/x64"
- fi
- # PLATFORM_TOOLSET is used during the compilation of the freetype sources (see
- # 'LIB_BUILD_FREETYPE' in libraries.m4) and must be 'Windows7.1SDK' for Windows7.1SDK
- # TODO: improve detection for other versions of SDK
- eval PLATFORM_TOOLSET="\${VS_SDK_PLATFORM_NAME_${VS_VERSION}}"
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found Windows SDK installation at $WIN_SDK_BASE using $METHOD" >&5
-$as_echo "$as_me: Found Windows SDK installation at $WIN_SDK_BASE using $METHOD" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: Warning: Installation is broken, SetEnv.Cmd is missing. Ignoring" >&5
-$as_echo "$as_me: Warning: Installation is broken, SetEnv.Cmd is missing. Ignoring" >&6;}
- fi
- fi
- fi
-
- fi
- if test "x$PROGRAMW6432" != x; then
-
- if test "x$VS_ENV_CMD" = x; then
- VS_VERSION="${VS_VERSION}"
- WIN_SDK_BASE="$PROGRAMW6432/$SDK_INSTALL_DIR"
- METHOD="well-known name"
-
- windows_path="$WIN_SDK_BASE"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- WIN_SDK_BASE="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- WIN_SDK_BASE="$unix_path"
- fi
-
- if test -d "$WIN_SDK_BASE"; then
- # There have been cases of partial or broken SDK installations. A missing
- # lib dir is not going to work.
- if test ! -d "$WIN_SDK_BASE/lib"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found Windows SDK installation at $WIN_SDK_BASE using $METHOD" >&5
-$as_echo "$as_me: Found Windows SDK installation at $WIN_SDK_BASE using $METHOD" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: Warning: Installation is broken, lib dir is missing. Ignoring" >&5
-$as_echo "$as_me: Warning: Installation is broken, lib dir is missing. Ignoring" >&6;}
- elif test -f "$WIN_SDK_BASE/Bin/SetEnv.Cmd"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found Windows SDK installation at $WIN_SDK_BASE using $METHOD" >&5
-$as_echo "$as_me: Found Windows SDK installation at $WIN_SDK_BASE using $METHOD" >&6;}
- VS_ENV_CMD="$WIN_SDK_BASE/Bin/SetEnv.Cmd"
- if test "x$OPENJDK_TARGET_CPU_BITS" = x32; then
- VS_ENV_ARGS="/x86"
- else
- VS_ENV_ARGS="/x64"
- fi
- # PLATFORM_TOOLSET is used during the compilation of the freetype sources (see
- # 'LIB_BUILD_FREETYPE' in libraries.m4) and must be 'Windows7.1SDK' for Windows7.1SDK
- # TODO: improve detection for other versions of SDK
- eval PLATFORM_TOOLSET="\${VS_SDK_PLATFORM_NAME_${VS_VERSION}}"
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found Windows SDK installation at $WIN_SDK_BASE using $METHOD" >&5
-$as_echo "$as_me: Found Windows SDK installation at $WIN_SDK_BASE using $METHOD" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: Warning: Installation is broken, SetEnv.Cmd is missing. Ignoring" >&5
-$as_echo "$as_me: Warning: Installation is broken, SetEnv.Cmd is missing. Ignoring" >&6;}
- fi
- fi
- fi
-
- fi
- if test "x$PROGRAMFILES" != x; then
-
- if test "x$VS_ENV_CMD" = x; then
- VS_VERSION="${VS_VERSION}"
- WIN_SDK_BASE="$PROGRAMFILES/$SDK_INSTALL_DIR"
- METHOD="well-known name"
-
- windows_path="$WIN_SDK_BASE"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- WIN_SDK_BASE="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- WIN_SDK_BASE="$unix_path"
- fi
-
- if test -d "$WIN_SDK_BASE"; then
- # There have been cases of partial or broken SDK installations. A missing
- # lib dir is not going to work.
- if test ! -d "$WIN_SDK_BASE/lib"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found Windows SDK installation at $WIN_SDK_BASE using $METHOD" >&5
-$as_echo "$as_me: Found Windows SDK installation at $WIN_SDK_BASE using $METHOD" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: Warning: Installation is broken, lib dir is missing. Ignoring" >&5
-$as_echo "$as_me: Warning: Installation is broken, lib dir is missing. Ignoring" >&6;}
- elif test -f "$WIN_SDK_BASE/Bin/SetEnv.Cmd"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found Windows SDK installation at $WIN_SDK_BASE using $METHOD" >&5
-$as_echo "$as_me: Found Windows SDK installation at $WIN_SDK_BASE using $METHOD" >&6;}
- VS_ENV_CMD="$WIN_SDK_BASE/Bin/SetEnv.Cmd"
- if test "x$OPENJDK_TARGET_CPU_BITS" = x32; then
- VS_ENV_ARGS="/x86"
- else
- VS_ENV_ARGS="/x64"
- fi
- # PLATFORM_TOOLSET is used during the compilation of the freetype sources (see
- # 'LIB_BUILD_FREETYPE' in libraries.m4) and must be 'Windows7.1SDK' for Windows7.1SDK
- # TODO: improve detection for other versions of SDK
- eval PLATFORM_TOOLSET="\${VS_SDK_PLATFORM_NAME_${VS_VERSION}}"
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found Windows SDK installation at $WIN_SDK_BASE using $METHOD" >&5
-$as_echo "$as_me: Found Windows SDK installation at $WIN_SDK_BASE using $METHOD" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: Warning: Installation is broken, SetEnv.Cmd is missing. Ignoring" >&5
-$as_echo "$as_me: Warning: Installation is broken, SetEnv.Cmd is missing. Ignoring" >&6;}
- fi
- fi
- fi
-
- fi
-
- if test "x$VS_ENV_CMD" = x; then
- VS_VERSION="${VS_VERSION}"
- WIN_SDK_BASE="C:/Program Files/$SDK_INSTALL_DIR"
- METHOD="well-known name"
-
- windows_path="$WIN_SDK_BASE"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- WIN_SDK_BASE="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- WIN_SDK_BASE="$unix_path"
- fi
-
- if test -d "$WIN_SDK_BASE"; then
- # There have been cases of partial or broken SDK installations. A missing
- # lib dir is not going to work.
- if test ! -d "$WIN_SDK_BASE/lib"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found Windows SDK installation at $WIN_SDK_BASE using $METHOD" >&5
-$as_echo "$as_me: Found Windows SDK installation at $WIN_SDK_BASE using $METHOD" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: Warning: Installation is broken, lib dir is missing. Ignoring" >&5
-$as_echo "$as_me: Warning: Installation is broken, lib dir is missing. Ignoring" >&6;}
- elif test -f "$WIN_SDK_BASE/Bin/SetEnv.Cmd"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found Windows SDK installation at $WIN_SDK_BASE using $METHOD" >&5
-$as_echo "$as_me: Found Windows SDK installation at $WIN_SDK_BASE using $METHOD" >&6;}
- VS_ENV_CMD="$WIN_SDK_BASE/Bin/SetEnv.Cmd"
- if test "x$OPENJDK_TARGET_CPU_BITS" = x32; then
- VS_ENV_ARGS="/x86"
- else
- VS_ENV_ARGS="/x64"
- fi
- # PLATFORM_TOOLSET is used during the compilation of the freetype sources (see
- # 'LIB_BUILD_FREETYPE' in libraries.m4) and must be 'Windows7.1SDK' for Windows7.1SDK
- # TODO: improve detection for other versions of SDK
- eval PLATFORM_TOOLSET="\${VS_SDK_PLATFORM_NAME_${VS_VERSION}}"
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found Windows SDK installation at $WIN_SDK_BASE using $METHOD" >&5
-$as_echo "$as_me: Found Windows SDK installation at $WIN_SDK_BASE using $METHOD" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: Warning: Installation is broken, SetEnv.Cmd is missing. Ignoring" >&5
-$as_echo "$as_me: Warning: Installation is broken, SetEnv.Cmd is missing. Ignoring" >&6;}
- fi
- fi
- fi
-
-
- if test "x$VS_ENV_CMD" = x; then
- VS_VERSION="${VS_VERSION}"
- WIN_SDK_BASE="C:/Program Files (x86)/$SDK_INSTALL_DIR"
- METHOD="well-known name"
-
- windows_path="$WIN_SDK_BASE"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- WIN_SDK_BASE="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- WIN_SDK_BASE="$unix_path"
- fi
-
- if test -d "$WIN_SDK_BASE"; then
- # There have been cases of partial or broken SDK installations. A missing
- # lib dir is not going to work.
- if test ! -d "$WIN_SDK_BASE/lib"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found Windows SDK installation at $WIN_SDK_BASE using $METHOD" >&5
-$as_echo "$as_me: Found Windows SDK installation at $WIN_SDK_BASE using $METHOD" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: Warning: Installation is broken, lib dir is missing. Ignoring" >&5
-$as_echo "$as_me: Warning: Installation is broken, lib dir is missing. Ignoring" >&6;}
- elif test -f "$WIN_SDK_BASE/Bin/SetEnv.Cmd"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found Windows SDK installation at $WIN_SDK_BASE using $METHOD" >&5
-$as_echo "$as_me: Found Windows SDK installation at $WIN_SDK_BASE using $METHOD" >&6;}
- VS_ENV_CMD="$WIN_SDK_BASE/Bin/SetEnv.Cmd"
- if test "x$OPENJDK_TARGET_CPU_BITS" = x32; then
- VS_ENV_ARGS="/x86"
- else
- VS_ENV_ARGS="/x64"
- fi
- # PLATFORM_TOOLSET is used during the compilation of the freetype sources (see
- # 'LIB_BUILD_FREETYPE' in libraries.m4) and must be 'Windows7.1SDK' for Windows7.1SDK
- # TODO: improve detection for other versions of SDK
- eval PLATFORM_TOOLSET="\${VS_SDK_PLATFORM_NAME_${VS_VERSION}}"
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found Windows SDK installation at $WIN_SDK_BASE using $METHOD" >&5
-$as_echo "$as_me: Found Windows SDK installation at $WIN_SDK_BASE using $METHOD" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: Warning: Installation is broken, SetEnv.Cmd is missing. Ignoring" >&5
-$as_echo "$as_me: Warning: Installation is broken, SetEnv.Cmd is missing. Ignoring" >&6;}
- fi
- fi
- fi
-
- fi
-
- if test "x$VS_ENV_CMD" != x; then
- TOOLCHAIN_VERSION=$VS_VERSION
- eval VS_DESCRIPTION="\${VS_DESCRIPTION_${VS_VERSION}}"
- eval VS_VERSION_INTERNAL="\${VS_VERSION_INTERNAL_${VS_VERSION}}"
- eval MSVCR_NAME="\${VS_MSVCR_${VS_VERSION}}"
- eval MSVCP_NAME="\${VS_MSVCP_${VS_VERSION}}"
- # The rest of the variables are already evaled while probing
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found $VS_DESCRIPTION" >&5
-$as_echo "$as_me: Found $VS_DESCRIPTION" >&6;}
- break
- fi
- done
-
-
- # If we have a devkit, skip all of the below.
- if test "x$DEVKIT_VS_VERSION" = x; then
- if test "x$VS_ENV_CMD" != x; then
- # We have found a Visual Studio environment on disk, let's extract variables from the vsvars bat file.
-
- # Only process if variable expands to non-empty
-
- if test "x$VS_ENV_CMD" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$VS_ENV_CMD"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path=`$CYGPATH -u "$path"`
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path=`$CYGPATH -u "$path"`
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of VS_ENV_CMD, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of VS_ENV_CMD, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of VS_ENV_CMD" "$LINENO" 5
- fi
- fi
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file presence.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- # Short path failed, file does not exist as specified.
- # Try adding .exe or .cmd
- if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
- elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of VS_ENV_CMD, which resolves as \"$new_path\", is invalid." >&5
-$as_echo "$as_me: The path of VS_ENV_CMD, which resolves as \"$new_path\", is invalid." >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&5
-$as_echo "$as_me: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&6;}
- as_fn_error $? "Cannot locate the the path of VS_ENV_CMD" "$LINENO" 5
- fi
- else
- input_to_shortpath="$new_path"
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
- new_path="$input_to_shortpath"
-
- input_path="$input_to_shortpath"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $input_to_shortpath | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$VS_ENV_CMD"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
-
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in MSYS causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- fi
-
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of VS_ENV_CMD, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of VS_ENV_CMD, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of VS_ENV_CMD" "$LINENO" 5
- fi
- fi
-
- # Now new_path has a complete unix path to the binary
- if test "x`$ECHO $new_path | $GREP ^/bin/`" != x; then
- # Keep paths in /bin as-is, but remove trailing .exe if any
- new_path="${new_path/%.exe/}"
- # Do not save /bin paths to all_fixpath_prefixes!
- else
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $new_path`
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
- # Output is in $new_path
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
- fi
-
- else
- # We're on a unix platform. Hooray! :)
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$VS_ENV_CMD"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Cannot rely on the command "which" here since it doesn't always work.
- is_absolute_path=`$ECHO "$path" | $GREP ^/`
- if test -z "$is_absolute_path"; then
- # Path to executable is not absolute. Find it.
- IFS_save="$IFS"
- IFS=:
- for p in $PATH; do
- if test -f "$p/$path" && test -x "$p/$path"; then
- new_path="$p/$path"
- break
- fi
- done
- IFS="$IFS_save"
- else
- # This is an absolute path, we can use it without further modifications.
- new_path="$path"
- fi
-
- if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of VS_ENV_CMD, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of VS_ENV_CMD, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
-$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of VS_ENV_CMD" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
-
- if test "x$complete" != "x$new_complete"; then
- VS_ENV_CMD="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting VS_ENV_CMD to \"$new_complete\"" >&5
-$as_echo "$as_me: Rewriting VS_ENV_CMD to \"$new_complete\"" >&6;}
- fi
- fi
-
-
- # Lets extract the variables that are set by vcvarsall.bat/vsvars32.bat/vsvars64.bat
- { $as_echo "$as_me:${as_lineno-$LINENO}: Trying to extract Visual Studio environment variables" >&5
-$as_echo "$as_me: Trying to extract Visual Studio environment variables" >&6;}
-
- # We need to create a couple of temporary files.
- VS_ENV_TMP_DIR="$CONFIGURESUPPORT_OUTPUTDIR/vs-env"
- $MKDIR -p $VS_ENV_TMP_DIR
-
- # Cannot use the VS10 setup script directly (since it only updates the DOS subshell environment).
- # Instead create a shell script which will set the relevant variables when run.
- WINPATH_VS_ENV_CMD="$VS_ENV_CMD"
-
- unix_path="$WINPATH_VS_ENV_CMD"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- windows_path=`$CYGPATH -m "$unix_path"`
- WINPATH_VS_ENV_CMD="$windows_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- windows_path=`cmd //c echo $unix_path`
- WINPATH_VS_ENV_CMD="$windows_path"
- fi
-
- WINPATH_BASH="$BASH"
-
- unix_path="$WINPATH_BASH"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- windows_path=`$CYGPATH -m "$unix_path"`
- WINPATH_BASH="$windows_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- windows_path=`cmd //c echo $unix_path`
- WINPATH_BASH="$windows_path"
- fi
-
-
- # Generate a DOS batch file which runs $VS_ENV_CMD, and then creates a shell
- # script (executable by bash) that will setup the important variables.
- EXTRACT_VC_ENV_BAT_FILE="$VS_ENV_TMP_DIR/extract-vs-env.bat"
- $ECHO "@echo off" > $EXTRACT_VC_ENV_BAT_FILE
- # This will end up something like:
- # call C:/progra~2/micros~2.0/vc/bin/amd64/vcvars64.bat
- $ECHO "call $WINPATH_VS_ENV_CMD $VS_ENV_ARGS" >> $EXTRACT_VC_ENV_BAT_FILE
- # These will end up something like:
- # C:/CygWin/bin/bash -c 'echo VS_PATH=\"$PATH\" > localdevenv.sh
- # The trailing space for everyone except PATH is no typo, but is needed due
- # to trailing \ in the Windows paths. These will be stripped later.
- $ECHO "$WINPATH_BASH -c 'echo VS_PATH="'\"$PATH\" > set-vs-env.sh' \
- >> $EXTRACT_VC_ENV_BAT_FILE
- $ECHO "$WINPATH_BASH -c 'echo VS_INCLUDE="'\"$INCLUDE\;$include \" >> set-vs-env.sh' \
- >> $EXTRACT_VC_ENV_BAT_FILE
- $ECHO "$WINPATH_BASH -c 'echo VS_LIB="'\"$LIB\;$lib \" >> set-vs-env.sh' \
- >> $EXTRACT_VC_ENV_BAT_FILE
- $ECHO "$WINPATH_BASH -c 'echo VCINSTALLDIR="'\"$VCINSTALLDIR \" >> set-vs-env.sh' \
- >> $EXTRACT_VC_ENV_BAT_FILE
- $ECHO "$WINPATH_BASH -c 'echo WindowsSdkDir="'\"$WindowsSdkDir \" >> set-vs-env.sh' \
- >> $EXTRACT_VC_ENV_BAT_FILE
- $ECHO "$WINPATH_BASH -c 'echo WINDOWSSDKDIR="'\"$WINDOWSSDKDIR \" >> set-vs-env.sh' \
- >> $EXTRACT_VC_ENV_BAT_FILE
-
- # Now execute the newly created bat file.
- # The | cat is to stop SetEnv.Cmd to mess with system colors on msys.
- # Change directory so we don't need to mess with Windows paths in redirects.
- cd $VS_ENV_TMP_DIR
- cmd /c extract-vs-env.bat | $CAT
- cd $CURDIR
-
- if test ! -s $VS_ENV_TMP_DIR/set-vs-env.sh; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not succesfully extract the envionment variables needed for the VS setup." >&5
-$as_echo "$as_me: Could not succesfully extract the envionment variables needed for the VS setup." >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: Try setting --with-tools-dir to the VC/bin directory within the VS installation" >&5
-$as_echo "$as_me: Try setting --with-tools-dir to the VC/bin directory within the VS installation" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: or run \"bash.exe -l\" from a VS command prompt and then run configure from there." >&5
-$as_echo "$as_me: or run \"bash.exe -l\" from a VS command prompt and then run configure from there." >&6;}
- as_fn_error $? "Cannot continue" "$LINENO" 5
- fi
-
- # Now set all paths and other env variables. This will allow the rest of
- # the configure script to find and run the compiler in the proper way.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting extracted environment variables" >&5
-$as_echo "$as_me: Setting extracted environment variables" >&6;}
- . $VS_ENV_TMP_DIR/set-vs-env.sh
- # Now we have VS_PATH, VS_INCLUDE, VS_LIB. For further checking, we
- # also define VCINSTALLDIR, WindowsSdkDir and WINDOWSSDKDIR.
- else
- # We did not find a vsvars bat file, let's hope we are run from a VS command prompt.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Cannot locate a valid Visual Studio installation, checking current environment" >&5
-$as_echo "$as_me: Cannot locate a valid Visual Studio installation, checking current environment" >&6;}
- fi
- fi
-
- # At this point, we should have correct variables in the environment, or we can't continue.
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for Visual Studio variables" >&5
-$as_echo_n "checking for Visual Studio variables... " >&6; }
-
- if test "x$VCINSTALLDIR" != x || test "x$WindowsSDKDir" != x \
- || test "x$WINDOWSSDKDIR" != x || test "x$DEVKIT_NAME" != x; then
- if test "x$VS_INCLUDE" = x || test "x$VS_LIB" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: present but broken" >&5
-$as_echo "present but broken" >&6; }
- as_fn_error $? "Your VC command prompt seems broken, INCLUDE and/or LIB is missing." "$LINENO" 5
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
-$as_echo "ok" >&6; }
- # Remove any trailing "\" ";" and " " from the variables.
- VS_INCLUDE=`$ECHO "$VS_INCLUDE" | $SED -e 's/\\\\*;* *$//'`
- VS_LIB=`$ECHO "$VS_LIB" | $SED 's/\\\\*;* *$//'`
- VCINSTALLDIR=`$ECHO "$VCINSTALLDIR" | $SED 's/\\\\* *$//'`
- WindowsSDKDir=`$ECHO "$WindowsSDKDir" | $SED 's/\\\\* *$//'`
- WINDOWSSDKDIR=`$ECHO "$WINDOWSSDKDIR" | $SED 's/\\\\* *$//'`
- # Remove any paths containing # (typically F#) as that messes up make. This
- # is needed if visual studio was installed with F# support.
- VS_PATH=`$ECHO "$VS_PATH" | $SED 's/[^:#]*#[^:]*://g'`
-
-
-
-
-
- # Convert VS_INCLUDE into SYSROOT_CFLAGS
- OLDIFS="$IFS"
- IFS=";"
- for i in $VS_INCLUDE; do
- ipath=$i
- # Only process non-empty elements
- if test "x$ipath" != x; then
- IFS="$OLDIFS"
- # Check that directory exists before calling fixup_path
- testpath=$ipath
-
- windows_path="$testpath"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- testpath="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- testpath="$unix_path"
- fi
-
- if test -d "$testpath"; then
-
- # Only process if variable expands to non-empty
-
- if test "x$ipath" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- path="$ipath"
- new_path=`$CYGPATH -u "$path"`
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file precense.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of ipath, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of ipath, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Cannot locate the the path of ipath" "$LINENO" 5
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
-
- if test "x$path" != "x$new_path"; then
- ipath="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting ipath to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting ipath to \"$new_path\"" >&6;}
- fi
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- path="$ipath"
- has_colon=`$ECHO $path | $GREP ^.:`
- new_path="$path"
- if test "x$has_colon" = x; then
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $path`
- fi
-
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- if test "x$path" != "x$new_path"; then
- ipath="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting ipath to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting ipath to \"$new_path\"" >&6;}
- fi
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
-
- else
- # We're on a unix platform. Hooray! :)
- path="$ipath"
- has_space=`$ECHO "$path" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of ipath, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of ipath, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
- fi
-
- # Use eval to expand a potential ~
- eval path="$path"
- if test ! -f "$path" && test ! -d "$path"; then
- as_fn_error $? "The path of ipath, which resolves as \"$path\", is not found." "$LINENO" 5
- fi
-
- if test -d "$path"; then
- ipath="`cd "$path"; $THEPWDCMD -L`"
- else
- dir="`$DIRNAME "$path"`"
- base="`$BASENAME "$path"`"
- ipath="`cd "$dir"; $THEPWDCMD -L`/$base"
- fi
- fi
- fi
-
- SYSROOT_CFLAGS="$SYSROOT_CFLAGS -I$ipath"
- fi
- IFS=";"
- fi
- done
- # Convert VS_LIB into SYSROOT_LDFLAGS
- for i in $VS_LIB; do
- libpath=$i
- # Only process non-empty elements
- if test "x$libpath" != x; then
- IFS="$OLDIFS"
- # Check that directory exists before calling fixup_path
- testpath=$libpath
-
- windows_path="$testpath"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- testpath="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- testpath="$unix_path"
- fi
-
- if test -d "$testpath"; then
-
- # Only process if variable expands to non-empty
-
- if test "x$libpath" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- path="$libpath"
- new_path=`$CYGPATH -u "$path"`
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file precense.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of libpath, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of libpath, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Cannot locate the the path of libpath" "$LINENO" 5
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
-
- if test "x$path" != "x$new_path"; then
- libpath="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting libpath to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting libpath to \"$new_path\"" >&6;}
- fi
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- path="$libpath"
- has_colon=`$ECHO $path | $GREP ^.:`
- new_path="$path"
- if test "x$has_colon" = x; then
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $path`
- fi
-
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- if test "x$path" != "x$new_path"; then
- libpath="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting libpath to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting libpath to \"$new_path\"" >&6;}
- fi
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
-
- else
- # We're on a unix platform. Hooray! :)
- path="$libpath"
- has_space=`$ECHO "$path" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of libpath, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of libpath, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
- fi
-
- # Use eval to expand a potential ~
- eval path="$path"
- if test ! -f "$path" && test ! -d "$path"; then
- as_fn_error $? "The path of libpath, which resolves as \"$path\", is not found." "$LINENO" 5
- fi
-
- if test -d "$path"; then
- libpath="`cd "$path"; $THEPWDCMD -L`"
- else
- dir="`$DIRNAME "$path"`"
- base="`$BASENAME "$path"`"
- libpath="`cd "$dir"; $THEPWDCMD -L`/$base"
- fi
- fi
- fi
-
- SYSROOT_LDFLAGS="$SYSROOT_LDFLAGS -libpath:$libpath"
- fi
- IFS=";"
- fi
- done
- IFS="$OLDIFS"
- fi
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
-
- if test "x$VS_ENV_CMD" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Cannot locate a valid Visual Studio or Windows SDK installation on disk," >&5
-$as_echo "$as_me: Cannot locate a valid Visual Studio or Windows SDK installation on disk," >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: nor is this script run from a Visual Studio command prompt." >&5
-$as_echo "$as_me: nor is this script run from a Visual Studio command prompt." >&6;}
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: Running the extraction script failed." >&5
-$as_echo "$as_me: Running the extraction script failed." >&6;}
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: Try setting --with-tools-dir to the VC/bin directory within the VS installation" >&5
-$as_echo "$as_me: Try setting --with-tools-dir to the VC/bin directory within the VS installation" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: or run \"bash.exe -l\" from a VS command prompt and then run configure from there." >&5
-$as_echo "$as_me: or run \"bash.exe -l\" from a VS command prompt and then run configure from there." >&6;}
- as_fn_error $? "Cannot continue" "$LINENO" 5
- fi
-
- # Reset path to VS_PATH. It will include everything that was on PATH at the time we
- # ran TOOLCHAIN_SETUP_VISUAL_STUDIO_ENV.
- PATH="$VS_PATH"
- # The microsoft toolchain also requires INCLUDE and LIB to be set.
- export INCLUDE="$VS_INCLUDE"
- export LIB="$VS_LIB"
- else
- if test "x$XCODE_VERSION_OUTPUT" != x; then
- # For Xcode, we set the Xcode version as TOOLCHAIN_VERSION
- TOOLCHAIN_VERSION=`$ECHO $XCODE_VERSION_OUTPUT | $CUT -f 2 -d ' '`
- TOOLCHAIN_DESCRIPTION="$TOOLCHAIN_DESCRIPTION from Xcode"
- else
- # Currently we do not define this for other toolchains. This might change as the need arise.
- TOOLCHAIN_VERSION=
- fi
- fi
-
-
- # Finally add TOOLCHAIN_PATH at the beginning, to allow --with-tools-dir to
- # override all other locations.
- if test "x$TOOLCHAIN_PATH" != x; then
- PATH=$TOOLCHAIN_PATH:$PATH
- fi
-
-
- #
- # Setup the compilers (CC and CXX)
- #
-
- COMPILER_NAME=C
- SEARCH_LIST="$TOOLCHAIN_CC_BINARY"
-
- if test "x$CC" != x; then
- # User has supplied compiler name already, always let that override.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied compiler CC=$CC" >&5
-$as_echo "$as_me: Will use user supplied compiler CC=$CC" >&6;}
- if test "x`basename $CC`" = "x$CC"; then
- # A command without a complete path is provided, search $PATH.
-
- for ac_prog in $CC
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_POTENTIAL_CC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $POTENTIAL_CC in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_POTENTIAL_CC="$POTENTIAL_CC" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_POTENTIAL_CC="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-POTENTIAL_CC=$ac_cv_path_POTENTIAL_CC
-if test -n "$POTENTIAL_CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $POTENTIAL_CC" >&5
-$as_echo "$POTENTIAL_CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$POTENTIAL_CC" && break
-done
-
- if test "x$POTENTIAL_CC" != x; then
- CC=$POTENTIAL_CC
- else
- as_fn_error $? "User supplied compiler CC=$CC could not be found" "$LINENO" 5
- fi
- else
- # Otherwise it might already be a complete path
- if test ! -x "$CC"; then
- as_fn_error $? "User supplied compiler CC=$CC does not exist" "$LINENO" 5
- fi
- fi
- else
- # No user supplied value. Locate compiler ourselves.
-
- # If we are cross compiling, assume cross compilation tools follows the
- # cross compilation standard where they are prefixed with the autoconf
- # standard name for the target. For example the binary
- # i686-sun-solaris2.10-gcc will cross compile for i686-sun-solaris2.10.
- # If we are not cross compiling, then the default compiler name will be
- # used.
-
- CC=
- # If TOOLCHAIN_PATH is set, check for all compiler names in there first
- # before checking the rest of the PATH.
- # FIXME: Now that we prefix the TOOLS_DIR to the PATH in the PRE_DETECTION
- # step, this should not be necessary.
- if test -n "$TOOLCHAIN_PATH"; then
- PATH_save="$PATH"
- PATH="$TOOLCHAIN_PATH"
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}$SEARCH_LIST", so it can be a program name with args.
-set dummy ${ac_tool_prefix}$SEARCH_LIST; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_TOOLCHAIN_PATH_CC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $TOOLCHAIN_PATH_CC in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_TOOLCHAIN_PATH_CC="$TOOLCHAIN_PATH_CC" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_TOOLCHAIN_PATH_CC="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-TOOLCHAIN_PATH_CC=$ac_cv_path_TOOLCHAIN_PATH_CC
-if test -n "$TOOLCHAIN_PATH_CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $TOOLCHAIN_PATH_CC" >&5
-$as_echo "$TOOLCHAIN_PATH_CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_path_TOOLCHAIN_PATH_CC"; then
- ac_pt_TOOLCHAIN_PATH_CC=$TOOLCHAIN_PATH_CC
- # Extract the first word of "$SEARCH_LIST", so it can be a program name with args.
-set dummy $SEARCH_LIST; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_ac_pt_TOOLCHAIN_PATH_CC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $ac_pt_TOOLCHAIN_PATH_CC in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_ac_pt_TOOLCHAIN_PATH_CC="$ac_pt_TOOLCHAIN_PATH_CC" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_ac_pt_TOOLCHAIN_PATH_CC="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-ac_pt_TOOLCHAIN_PATH_CC=$ac_cv_path_ac_pt_TOOLCHAIN_PATH_CC
-if test -n "$ac_pt_TOOLCHAIN_PATH_CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_TOOLCHAIN_PATH_CC" >&5
-$as_echo "$ac_pt_TOOLCHAIN_PATH_CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
- if test "x$ac_pt_TOOLCHAIN_PATH_CC" = x; then
- TOOLCHAIN_PATH_CC=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- TOOLCHAIN_PATH_CC=$ac_pt_TOOLCHAIN_PATH_CC
- fi
-else
- TOOLCHAIN_PATH_CC="$ac_cv_path_TOOLCHAIN_PATH_CC"
-fi
-
- CC=$TOOLCHAIN_PATH_CC
- PATH="$PATH_save"
- fi
-
- # AC_PATH_TOOL can't be run multiple times with the same variable,
- # so create a new name for this run.
- if test "x$CC" = x; then
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}$SEARCH_LIST", so it can be a program name with args.
-set dummy ${ac_tool_prefix}$SEARCH_LIST; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_POTENTIAL_CC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $POTENTIAL_CC in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_POTENTIAL_CC="$POTENTIAL_CC" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_POTENTIAL_CC="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-POTENTIAL_CC=$ac_cv_path_POTENTIAL_CC
-if test -n "$POTENTIAL_CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $POTENTIAL_CC" >&5
-$as_echo "$POTENTIAL_CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_path_POTENTIAL_CC"; then
- ac_pt_POTENTIAL_CC=$POTENTIAL_CC
- # Extract the first word of "$SEARCH_LIST", so it can be a program name with args.
-set dummy $SEARCH_LIST; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_ac_pt_POTENTIAL_CC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $ac_pt_POTENTIAL_CC in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_ac_pt_POTENTIAL_CC="$ac_pt_POTENTIAL_CC" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_ac_pt_POTENTIAL_CC="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-ac_pt_POTENTIAL_CC=$ac_cv_path_ac_pt_POTENTIAL_CC
-if test -n "$ac_pt_POTENTIAL_CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_POTENTIAL_CC" >&5
-$as_echo "$ac_pt_POTENTIAL_CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
- if test "x$ac_pt_POTENTIAL_CC" = x; then
- POTENTIAL_CC=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- POTENTIAL_CC=$ac_pt_POTENTIAL_CC
- fi
-else
- POTENTIAL_CC="$ac_cv_path_POTENTIAL_CC"
-fi
-
- CC=$POTENTIAL_CC
- fi
-
- if test "x$CC" = x; then
-
- # Print a helpful message on how to acquire the necessary build dependency.
- # devkit is the help tag: freetype, cups, alsa etc
- MISSING_DEPENDENCY=devkit
-
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- cygwin_help $MISSING_DEPENDENCY
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- msys_help $MISSING_DEPENDENCY
- else
- PKGHANDLER_COMMAND=
-
- case $PKGHANDLER in
- apt-get)
- apt_help $MISSING_DEPENDENCY ;;
- yum)
- yum_help $MISSING_DEPENDENCY ;;
- brew)
- brew_help $MISSING_DEPENDENCY ;;
- port)
- port_help $MISSING_DEPENDENCY ;;
- pkgutil)
- pkgutil_help $MISSING_DEPENDENCY ;;
- pkgadd)
- pkgadd_help $MISSING_DEPENDENCY ;;
- esac
-
- if test "x$PKGHANDLER_COMMAND" != x; then
- HELP_MSG="You might be able to fix this by running '$PKGHANDLER_COMMAND'."
- fi
- fi
-
- as_fn_error $? "Could not find a $COMPILER_NAME compiler. $HELP_MSG" "$LINENO" 5
- fi
- fi
-
- # Now we have a compiler binary in CC. Make sure it's okay.
-
- # Only process if variable expands to non-empty
-
- if test "x$CC" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$CC"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path=`$CYGPATH -u "$path"`
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path=`$CYGPATH -u "$path"`
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of CC, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of CC, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of CC" "$LINENO" 5
- fi
- fi
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file presence.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- # Short path failed, file does not exist as specified.
- # Try adding .exe or .cmd
- if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
- elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of CC, which resolves as \"$new_path\", is invalid." >&5
-$as_echo "$as_me: The path of CC, which resolves as \"$new_path\", is invalid." >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&5
-$as_echo "$as_me: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&6;}
- as_fn_error $? "Cannot locate the the path of CC" "$LINENO" 5
- fi
- else
- input_to_shortpath="$new_path"
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
- new_path="$input_to_shortpath"
-
- input_path="$input_to_shortpath"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $input_to_shortpath | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$CC"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
-
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in MSYS causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- fi
-
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of CC, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of CC, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of CC" "$LINENO" 5
- fi
- fi
-
- # Now new_path has a complete unix path to the binary
- if test "x`$ECHO $new_path | $GREP ^/bin/`" != x; then
- # Keep paths in /bin as-is, but remove trailing .exe if any
- new_path="${new_path/%.exe/}"
- # Do not save /bin paths to all_fixpath_prefixes!
- else
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $new_path`
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
- # Output is in $new_path
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
- fi
-
- else
- # We're on a unix platform. Hooray! :)
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$CC"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Cannot rely on the command "which" here since it doesn't always work.
- is_absolute_path=`$ECHO "$path" | $GREP ^/`
- if test -z "$is_absolute_path"; then
- # Path to executable is not absolute. Find it.
- IFS_save="$IFS"
- IFS=:
- for p in $PATH; do
- if test -f "$p/$path" && test -x "$p/$path"; then
- new_path="$p/$path"
- break
- fi
- done
- IFS="$IFS_save"
- else
- # This is an absolute path, we can use it without further modifications.
- new_path="$path"
- fi
-
- if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of CC, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of CC, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
-$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of CC" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
-
- if test "x$complete" != "x$new_complete"; then
- CC="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting CC to \"$new_complete\"" >&5
-$as_echo "$as_me: Rewriting CC to \"$new_complete\"" >&6;}
- fi
- fi
-
- TEST_COMPILER="$CC"
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking resolved symbolic links for CC" >&5
-$as_echo_n "checking resolved symbolic links for CC... " >&6; }
- SYMLINK_ORIGINAL="$TEST_COMPILER"
-
- if test "x$OPENJDK_BUILD_OS" != xwindows; then
- # Follow a chain of symbolic links. Use readlink
- # where it exists, else fall back to horribly
- # complicated shell code.
- if test "x$READLINK_TESTED" != yes; then
- # On MacOSX there is a readlink tool with a different
- # purpose than the GNU readlink tool. Check the found readlink.
- ISGNU=`$READLINK --version 2>&1 | $GREP GNU`
- if test "x$ISGNU" = x; then
- # A readlink that we do not know how to use.
- # Are there other non-GNU readlinks out there?
- READLINK_TESTED=yes
- READLINK=
- fi
- fi
-
- if test "x$READLINK" != x; then
- SYMLINK_ORIGINAL=`$READLINK -f $SYMLINK_ORIGINAL`
- else
- # Save the current directory for restoring afterwards
- STARTDIR=$PWD
- COUNTER=0
- sym_link_dir=`$DIRNAME $SYMLINK_ORIGINAL`
- sym_link_file=`$BASENAME $SYMLINK_ORIGINAL`
- cd $sym_link_dir
- # Use -P flag to resolve symlinks in directories.
- cd `$THEPWDCMD -P`
- sym_link_dir=`$THEPWDCMD -P`
- # Resolve file symlinks
- while test $COUNTER -lt 20; do
- ISLINK=`$LS -l $sym_link_dir/$sym_link_file | $GREP '\->' | $SED -e 's/.*-> \(.*\)/\1/'`
- if test "x$ISLINK" == x; then
- # This is not a symbolic link! We are done!
- break
- fi
- # Again resolve directory symlinks since the target of the just found
- # link could be in a different directory
- cd `$DIRNAME $ISLINK`
- sym_link_dir=`$THEPWDCMD -P`
- sym_link_file=`$BASENAME $ISLINK`
- let COUNTER=COUNTER+1
- done
- cd $STARTDIR
- SYMLINK_ORIGINAL=$sym_link_dir/$sym_link_file
- fi
- fi
-
- if test "x$TEST_COMPILER" = "x$SYMLINK_ORIGINAL"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no symlink" >&5
-$as_echo "no symlink" >&6; }
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $SYMLINK_ORIGINAL" >&5
-$as_echo "$SYMLINK_ORIGINAL" >&6; }
-
- # We can't handle ccache by gcc wrappers, since we need to know if we're
- # using ccache. Instead ccache usage must be controlled by a configure option.
- COMPILER_BASENAME=`$BASENAME "$SYMLINK_ORIGINAL"`
- if test "x$COMPILER_BASENAME" = "xccache"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Please use --enable-ccache instead of providing a wrapped compiler." >&5
-$as_echo "$as_me: Please use --enable-ccache instead of providing a wrapped compiler." >&6;}
- as_fn_error $? "$TEST_COMPILER is a symbolic link to ccache. This is not supported." "$LINENO" 5
- fi
- fi
-
-
- COMPILER=$CC
- COMPILER_NAME=$COMPILER_NAME
-
- if test "x$TOOLCHAIN_TYPE" = xsolstudio; then
- # cc -V output typically looks like
- # cc: Sun C 5.12 Linux_i386 2011/11/16
- # or
- # cc: Studio 12.5 Sun C 5.14 SunOS_sparc 2016/05/31
- COMPILER_VERSION_OUTPUT=`$COMPILER -V 2>&1`
- # Check that this is likely to be the Solaris Studio cc.
- $ECHO "$COMPILER_VERSION_OUTPUT" | $GREP "^.* Sun $COMPILER_NAME" > /dev/null
- if test $? -ne 0; then
- ALT_VERSION_OUTPUT=`$COMPILER --version 2>&1`
- { $as_echo "$as_me:${as_lineno-$LINENO}: The $COMPILER_NAME compiler (located as $COMPILER) does not seem to be the required $TOOLCHAIN_TYPE compiler." >&5
-$as_echo "$as_me: The $COMPILER_NAME compiler (located as $COMPILER) does not seem to be the required $TOOLCHAIN_TYPE compiler." >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: The result from running with -V was: \"$COMPILER_VERSION_OUTPUT\"" >&5
-$as_echo "$as_me: The result from running with -V was: \"$COMPILER_VERSION_OUTPUT\"" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: The result from running with --version was: \"$ALT_VERSION_OUTPUT\"" >&5
-$as_echo "$as_me: The result from running with --version was: \"$ALT_VERSION_OUTPUT\"" >&6;}
- as_fn_error $? "A $TOOLCHAIN_TYPE compiler is required. Try setting --with-tools-dir." "$LINENO" 5
- fi
- # Remove usage instructions (if present), and
- # collapse compiler output into a single line
- COMPILER_VERSION_STRING=`$ECHO $COMPILER_VERSION_OUTPUT | \
- $SED -e 's/ *[Uu]sage:.*//'`
- COMPILER_VERSION_NUMBER=`$ECHO $COMPILER_VERSION_OUTPUT | \
- $SED -e "s/^.*[ ,\t]$COMPILER_NAME[ ,\t]\([1-9]\.[0-9][0-9]*\).*/\1/"`
- elif test "x$TOOLCHAIN_TYPE" = xxlc; then
- # xlc -qversion output typically looks like
- # IBM XL C/C++ for AIX, V11.1 (5724-X13)
- # Version: 11.01.0000.0015
- COMPILER_VERSION_OUTPUT=`$COMPILER -qversion 2>&1`
- # Check that this is likely to be the IBM XL C compiler.
- $ECHO "$COMPILER_VERSION_OUTPUT" | $GREP "IBM XL C" > /dev/null
- if test $? -ne 0; then
- ALT_VERSION_OUTPUT=`$COMPILER --version 2>&1`
- { $as_echo "$as_me:${as_lineno-$LINENO}: The $COMPILER_NAME compiler (located as $COMPILER) does not seem to be the required $TOOLCHAIN_TYPE compiler." >&5
-$as_echo "$as_me: The $COMPILER_NAME compiler (located as $COMPILER) does not seem to be the required $TOOLCHAIN_TYPE compiler." >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: The result from running with -qversion was: \"$COMPILER_VERSION_OUTPUT\"" >&5
-$as_echo "$as_me: The result from running with -qversion was: \"$COMPILER_VERSION_OUTPUT\"" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: The result from running with --version was: \"$ALT_VERSION_OUTPUT\"" >&5
-$as_echo "$as_me: The result from running with --version was: \"$ALT_VERSION_OUTPUT\"" >&6;}
- as_fn_error $? "A $TOOLCHAIN_TYPE compiler is required. Try setting --with-tools-dir." "$LINENO" 5
- fi
- # Collapse compiler output into a single line
- COMPILER_VERSION_STRING=`$ECHO $COMPILER_VERSION_OUTPUT`
- COMPILER_VERSION_NUMBER=`$ECHO $COMPILER_VERSION_OUTPUT | \
- $SED -e 's/^.*, V\([1-9][0-9.]*\).*$/\1/'`
- elif test "x$TOOLCHAIN_TYPE" = xmicrosoft; then
- # There is no specific version flag, but all output starts with a version string.
- # First line typically looks something like:
- # Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 16.00.40219.01 for 80x86
- COMPILER_VERSION_OUTPUT=`$COMPILER 2>&1 | $HEAD -n 1 | $TR -d '\r'`
- # Check that this is likely to be Microsoft CL.EXE.
- $ECHO "$COMPILER_VERSION_OUTPUT" | $GREP "Microsoft.*Compiler" > /dev/null
- if test $? -ne 0; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The $COMPILER_NAME compiler (located as $COMPILER) does not seem to be the required $TOOLCHAIN_TYPE compiler." >&5
-$as_echo "$as_me: The $COMPILER_NAME compiler (located as $COMPILER) does not seem to be the required $TOOLCHAIN_TYPE compiler." >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: The result from running it was: \"$COMPILER_VERSION_OUTPUT\"" >&5
-$as_echo "$as_me: The result from running it was: \"$COMPILER_VERSION_OUTPUT\"" >&6;}
- as_fn_error $? "A $TOOLCHAIN_TYPE compiler is required. Try setting --with-tools-dir." "$LINENO" 5
- fi
- # Collapse compiler output into a single line
- COMPILER_VERSION_STRING=`$ECHO $COMPILER_VERSION_OUTPUT`
- COMPILER_VERSION_NUMBER=`$ECHO $COMPILER_VERSION_OUTPUT | \
- $SED -e 's/^.*ersion.\([1-9][0-9.]*\) .*$/\1/'`
- elif test "x$TOOLCHAIN_TYPE" = xgcc; then
- # gcc --version output typically looks like
- # gcc (Ubuntu/Linaro 4.8.1-10ubuntu9) 4.8.1
- # Copyright (C) 2013 Free Software Foundation, Inc.
- # This is free software; see the source for copying conditions. There is NO
- # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- COMPILER_VERSION_OUTPUT=`$COMPILER --version 2>&1`
- # Check that this is likely to be GCC.
- $ECHO "$COMPILER_VERSION_OUTPUT" | $GREP "Free Software Foundation" > /dev/null
- if test $? -ne 0; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The $COMPILER_NAME compiler (located as $COMPILER) does not seem to be the required $TOOLCHAIN_TYPE compiler." >&5
-$as_echo "$as_me: The $COMPILER_NAME compiler (located as $COMPILER) does not seem to be the required $TOOLCHAIN_TYPE compiler." >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: The result from running with --version was: \"$COMPILER_VERSION\"" >&5
-$as_echo "$as_me: The result from running with --version was: \"$COMPILER_VERSION\"" >&6;}
- as_fn_error $? "A $TOOLCHAIN_TYPE compiler is required. Try setting --with-tools-dir." "$LINENO" 5
- fi
- # Remove Copyright and legalese from version string, and
- # collapse into a single line
- COMPILER_VERSION_STRING=`$ECHO $COMPILER_VERSION_OUTPUT | \
- $SED -e 's/ *Copyright .*//'`
- COMPILER_VERSION_NUMBER=`$ECHO $COMPILER_VERSION_OUTPUT | \
- $SED -e 's/^.* \([1-9]\.[0-9.]*\)[^0-9.].*$/\1/'`
- elif test "x$TOOLCHAIN_TYPE" = xclang; then
- # clang --version output typically looks like
- # Apple LLVM version 5.0 (clang-500.2.79) (based on LLVM 3.3svn)
- # clang version 3.3 (tags/RELEASE_33/final)
- # or
- # Debian clang version 3.2-7ubuntu1 (tags/RELEASE_32/final) (based on LLVM 3.2)
- # Target: x86_64-pc-linux-gnu
- # Thread model: posix
- COMPILER_VERSION_OUTPUT=`$COMPILER --version 2>&1`
- # Check that this is likely to be clang
- $ECHO "$COMPILER_VERSION_OUTPUT" | $GREP "clang" > /dev/null
- if test $? -ne 0; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The $COMPILER_NAME compiler (located as $COMPILER) does not seem to be the required $TOOLCHAIN_TYPE compiler." >&5
-$as_echo "$as_me: The $COMPILER_NAME compiler (located as $COMPILER) does not seem to be the required $TOOLCHAIN_TYPE compiler." >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: The result from running with --version was: \"$COMPILER_VERSION_OUTPUT\"" >&5
-$as_echo "$as_me: The result from running with --version was: \"$COMPILER_VERSION_OUTPUT\"" >&6;}
- as_fn_error $? "A $TOOLCHAIN_TYPE compiler is required. Try setting --with-tools-dir." "$LINENO" 5
- fi
- # Collapse compiler output into a single line
- COMPILER_VERSION_STRING=`$ECHO $COMPILER_VERSION_OUTPUT`
- COMPILER_VERSION_NUMBER=`$ECHO $COMPILER_VERSION_OUTPUT | \
- $SED -e 's/^.* version \([1-9][0-9.]*\).*$/\1/'`
- else
- as_fn_error $? "Unknown toolchain type $TOOLCHAIN_TYPE." "$LINENO" 5
- fi
- # This sets CC_VERSION_NUMBER or CXX_VERSION_NUMBER. (This comment is a grep marker)
- CC_VERSION_NUMBER="$COMPILER_VERSION_NUMBER"
- # This sets CC_VERSION_STRING or CXX_VERSION_STRING. (This comment is a grep marker)
- CC_VERSION_STRING="$COMPILER_VERSION_STRING"
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: Using $TOOLCHAIN_TYPE $COMPILER_NAME compiler version $COMPILER_VERSION_NUMBER [$COMPILER_VERSION_STRING]" >&5
-$as_echo "$as_me: Using $TOOLCHAIN_TYPE $COMPILER_NAME compiler version $COMPILER_VERSION_NUMBER [$COMPILER_VERSION_STRING]" >&6;}
-
-
- # Now that we have resolved CC ourself, let autoconf have its go at it
- ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-if test -n "$ac_tool_prefix"; then
- for ac_prog in $CC
- do
- # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$CC" && break
- done
-fi
-if test -z "$CC"; then
- ac_ct_CC=$CC
- for ac_prog in $CC
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_CC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_CC"; then
- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_CC="$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
-$as_echo "$ac_ct_CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$ac_ct_CC" && break
-done
-
- if test "x$ac_ct_CC" = x; then
- CC=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- CC=$ac_ct_CC
- fi
-fi
-
-
-test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "no acceptable C compiler found in \$PATH
-See \`config.log' for more details" "$LINENO" 5; }
-
-# Provide some information about the compiler.
-$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
-set X $ac_compile
-ac_compiler=$2
-for ac_option in --version -v -V -qversion; do
- { { ac_try="$ac_compiler $ac_option >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_compiler $ac_option >&5") 2>conftest.err
- ac_status=$?
- if test -s conftest.err; then
- sed '10a\
-... rest of stderr output deleted ...
- 10q' conftest.err >conftest.er1
- cat conftest.er1 >&5
- fi
- rm -f conftest.er1 conftest.err
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }
-done
-
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
-# Try to create an executable without -o first, disregard a.out.
-# It will help us diagnose broken compilers, and finding out an intuition
-# of exeext.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
-$as_echo_n "checking whether the C compiler works... " >&6; }
-ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
-
-# The possible output files:
-ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
-
-ac_rmfiles=
-for ac_file in $ac_files
-do
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
- * ) ac_rmfiles="$ac_rmfiles $ac_file";;
- esac
-done
-rm -f $ac_rmfiles
-
-if { { ac_try="$ac_link_default"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_link_default") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; then :
- # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
-# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
-# in a Makefile. We should not override ac_cv_exeext if it was cached,
-# so that the user can short-circuit this test for compilers unknown to
-# Autoconf.
-for ac_file in $ac_files ''
-do
- test -f "$ac_file" || continue
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
- ;;
- [ab].out )
- # We found the default executable, but exeext='' is most
- # certainly right.
- break;;
- *.* )
- if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
- then :; else
- ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
- fi
- # We set ac_cv_exeext here because the later test for it is not
- # safe: cross compilers may not add the suffix if given an `-o'
- # argument, so we may need to know it at that point already.
- # Even if this section looks crufty: it has the advantage of
- # actually working.
- break;;
- * )
- break;;
- esac
-done
-test "$ac_cv_exeext" = no && ac_cv_exeext=
-
-else
- ac_file=''
-fi
-if test -z "$ac_file"; then :
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-$as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error 77 "C compiler cannot create executables
-See \`config.log' for more details" "$LINENO" 5; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
-$as_echo_n "checking for C compiler default output file name... " >&6; }
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
-$as_echo "$ac_file" >&6; }
-ac_exeext=$ac_cv_exeext
-
-rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
-ac_clean_files=$ac_clean_files_save
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
-$as_echo_n "checking for suffix of executables... " >&6; }
-if { { ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_link") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; then :
- # If both `conftest.exe' and `conftest' are `present' (well, observable)
-# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
-# work properly (i.e., refer to `conftest.exe'), while it won't with
-# `rm'.
-for ac_file in conftest.exe conftest conftest.*; do
- test -f "$ac_file" || continue
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
- *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
- break;;
- * ) break;;
- esac
-done
-else
- { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details" "$LINENO" 5; }
-fi
-rm -f conftest conftest$ac_cv_exeext
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
-$as_echo "$ac_cv_exeext" >&6; }
-
-rm -f conftest.$ac_ext
-EXEEXT=$ac_cv_exeext
-ac_exeext=$EXEEXT
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include
-int
-main ()
-{
-FILE *f = fopen ("conftest.out", "w");
- return ferror (f) || fclose (f) != 0;
-
- ;
- return 0;
-}
-_ACEOF
-ac_clean_files="$ac_clean_files conftest.out"
-# Check that the compiler produces executables we can run. If not, either
-# the compiler is broken, or we cross compile.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
-$as_echo_n "checking whether we are cross compiling... " >&6; }
-if test "$cross_compiling" != yes; then
- { { ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_link") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }
- if { ac_try='./conftest$ac_cv_exeext'
- { { case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; }; then
- cross_compiling=no
- else
- if test "$cross_compiling" = maybe; then
- cross_compiling=yes
- else
- { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "cannot run C compiled programs.
-If you meant to cross compile, use \`--host'.
-See \`config.log' for more details" "$LINENO" 5; }
- fi
- fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
-$as_echo "$cross_compiling" >&6; }
-
-rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
-ac_clean_files=$ac_clean_files_save
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
-$as_echo_n "checking for suffix of object files... " >&6; }
-if ${ac_cv_objext+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.o conftest.obj
-if { { ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_compile") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; then :
- for ac_file in conftest.o conftest.obj conftest.*; do
- test -f "$ac_file" || continue;
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
- *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
- break;;
- esac
-done
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "cannot compute suffix of object files: cannot compile
-See \`config.log' for more details" "$LINENO" 5; }
-fi
-rm -f conftest.$ac_cv_objext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
-$as_echo "$ac_cv_objext" >&6; }
-OBJEXT=$ac_cv_objext
-ac_objext=$OBJEXT
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
-$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
-if ${ac_cv_c_compiler_gnu+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-#ifndef __GNUC__
- choke me
-#endif
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_compiler_gnu=yes
-else
- ac_compiler_gnu=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-ac_cv_c_compiler_gnu=$ac_compiler_gnu
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
-$as_echo "$ac_cv_c_compiler_gnu" >&6; }
-if test $ac_compiler_gnu = yes; then
- GCC=yes
-else
- GCC=
-fi
-ac_test_CFLAGS=${CFLAGS+set}
-ac_save_CFLAGS=$CFLAGS
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
-$as_echo_n "checking whether $CC accepts -g... " >&6; }
-if ${ac_cv_prog_cc_g+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_save_c_werror_flag=$ac_c_werror_flag
- ac_c_werror_flag=yes
- ac_cv_prog_cc_g=no
- CFLAGS="-g"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_prog_cc_g=yes
-else
- CFLAGS=""
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-
-else
- ac_c_werror_flag=$ac_save_c_werror_flag
- CFLAGS="-g"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_prog_cc_g=yes
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- ac_c_werror_flag=$ac_save_c_werror_flag
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
-$as_echo "$ac_cv_prog_cc_g" >&6; }
-if test "$ac_test_CFLAGS" = set; then
- CFLAGS=$ac_save_CFLAGS
-elif test $ac_cv_prog_cc_g = yes; then
- if test "$GCC" = yes; then
- CFLAGS="-g -O2"
- else
- CFLAGS="-g"
- fi
-else
- if test "$GCC" = yes; then
- CFLAGS="-O2"
- else
- CFLAGS=
- fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
-$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
-if ${ac_cv_prog_cc_c89+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_cv_prog_cc_c89=no
-ac_save_CC=$CC
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include
-#include
-struct stat;
-/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
-struct buf { int x; };
-FILE * (*rcsopen) (struct buf *, struct stat *, int);
-static char *e (p, i)
- char **p;
- int i;
-{
- return p[i];
-}
-static char *f (char * (*g) (char **, int), char **p, ...)
-{
- char *s;
- va_list v;
- va_start (v,p);
- s = g (p, va_arg (v,int));
- va_end (v);
- return s;
-}
-
-/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
- function prototypes and stuff, but not '\xHH' hex character constants.
- These don't provoke an error unfortunately, instead are silently treated
- as 'x'. The following induces an error, until -std is added to get
- proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
- array size at least. It's necessary to write '\x00'==0 to get something
- that's true only with -std. */
-int osf4_cc_array ['\x00' == 0 ? 1 : -1];
-
-/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
- inside strings and character constants. */
-#define FOO(x) 'x'
-int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
-
-int test (int i, double x);
-struct s1 {int (*f) (int a);};
-struct s2 {int (*f) (double a);};
-int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
-int argc;
-char **argv;
-int
-main ()
-{
-return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
- ;
- return 0;
-}
-_ACEOF
-for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
- -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
-do
- CC="$ac_save_CC $ac_arg"
- if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_prog_cc_c89=$ac_arg
-fi
-rm -f core conftest.err conftest.$ac_objext
- test "x$ac_cv_prog_cc_c89" != "xno" && break
-done
-rm -f conftest.$ac_ext
-CC=$ac_save_CC
-
-fi
-# AC_CACHE_VAL
-case "x$ac_cv_prog_cc_c89" in
- x)
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
-$as_echo "none needed" >&6; } ;;
- xno)
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
-$as_echo "unsupported" >&6; } ;;
- *)
- CC="$CC $ac_cv_prog_cc_c89"
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
-$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
-esac
-if test "x$ac_cv_prog_cc_c89" != xno; then :
-
-fi
-
-ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
-
-
- COMPILER_NAME=C++
- SEARCH_LIST="$TOOLCHAIN_CXX_BINARY"
-
- if test "x$CXX" != x; then
- # User has supplied compiler name already, always let that override.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied compiler CXX=$CXX" >&5
-$as_echo "$as_me: Will use user supplied compiler CXX=$CXX" >&6;}
- if test "x`basename $CXX`" = "x$CXX"; then
- # A command without a complete path is provided, search $PATH.
-
- for ac_prog in $CXX
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_POTENTIAL_CXX+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $POTENTIAL_CXX in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_POTENTIAL_CXX="$POTENTIAL_CXX" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_POTENTIAL_CXX="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-POTENTIAL_CXX=$ac_cv_path_POTENTIAL_CXX
-if test -n "$POTENTIAL_CXX"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $POTENTIAL_CXX" >&5
-$as_echo "$POTENTIAL_CXX" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$POTENTIAL_CXX" && break
-done
-
- if test "x$POTENTIAL_CXX" != x; then
- CXX=$POTENTIAL_CXX
- else
- as_fn_error $? "User supplied compiler CXX=$CXX could not be found" "$LINENO" 5
- fi
- else
- # Otherwise it might already be a complete path
- if test ! -x "$CXX"; then
- as_fn_error $? "User supplied compiler CXX=$CXX does not exist" "$LINENO" 5
- fi
- fi
- else
- # No user supplied value. Locate compiler ourselves.
-
- # If we are cross compiling, assume cross compilation tools follows the
- # cross compilation standard where they are prefixed with the autoconf
- # standard name for the target. For example the binary
- # i686-sun-solaris2.10-gcc will cross compile for i686-sun-solaris2.10.
- # If we are not cross compiling, then the default compiler name will be
- # used.
-
- CXX=
- # If TOOLCHAIN_PATH is set, check for all compiler names in there first
- # before checking the rest of the PATH.
- # FIXME: Now that we prefix the TOOLS_DIR to the PATH in the PRE_DETECTION
- # step, this should not be necessary.
- if test -n "$TOOLCHAIN_PATH"; then
- PATH_save="$PATH"
- PATH="$TOOLCHAIN_PATH"
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}$SEARCH_LIST", so it can be a program name with args.
-set dummy ${ac_tool_prefix}$SEARCH_LIST; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_TOOLCHAIN_PATH_CXX+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $TOOLCHAIN_PATH_CXX in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_TOOLCHAIN_PATH_CXX="$TOOLCHAIN_PATH_CXX" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_TOOLCHAIN_PATH_CXX="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-TOOLCHAIN_PATH_CXX=$ac_cv_path_TOOLCHAIN_PATH_CXX
-if test -n "$TOOLCHAIN_PATH_CXX"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $TOOLCHAIN_PATH_CXX" >&5
-$as_echo "$TOOLCHAIN_PATH_CXX" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_path_TOOLCHAIN_PATH_CXX"; then
- ac_pt_TOOLCHAIN_PATH_CXX=$TOOLCHAIN_PATH_CXX
- # Extract the first word of "$SEARCH_LIST", so it can be a program name with args.
-set dummy $SEARCH_LIST; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_ac_pt_TOOLCHAIN_PATH_CXX+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $ac_pt_TOOLCHAIN_PATH_CXX in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_ac_pt_TOOLCHAIN_PATH_CXX="$ac_pt_TOOLCHAIN_PATH_CXX" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_ac_pt_TOOLCHAIN_PATH_CXX="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-ac_pt_TOOLCHAIN_PATH_CXX=$ac_cv_path_ac_pt_TOOLCHAIN_PATH_CXX
-if test -n "$ac_pt_TOOLCHAIN_PATH_CXX"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_TOOLCHAIN_PATH_CXX" >&5
-$as_echo "$ac_pt_TOOLCHAIN_PATH_CXX" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
- if test "x$ac_pt_TOOLCHAIN_PATH_CXX" = x; then
- TOOLCHAIN_PATH_CXX=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- TOOLCHAIN_PATH_CXX=$ac_pt_TOOLCHAIN_PATH_CXX
- fi
-else
- TOOLCHAIN_PATH_CXX="$ac_cv_path_TOOLCHAIN_PATH_CXX"
-fi
-
- CXX=$TOOLCHAIN_PATH_CXX
- PATH="$PATH_save"
- fi
-
- # AC_PATH_TOOL can't be run multiple times with the same variable,
- # so create a new name for this run.
- if test "x$CXX" = x; then
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}$SEARCH_LIST", so it can be a program name with args.
-set dummy ${ac_tool_prefix}$SEARCH_LIST; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_POTENTIAL_CXX+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $POTENTIAL_CXX in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_POTENTIAL_CXX="$POTENTIAL_CXX" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_POTENTIAL_CXX="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-POTENTIAL_CXX=$ac_cv_path_POTENTIAL_CXX
-if test -n "$POTENTIAL_CXX"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $POTENTIAL_CXX" >&5
-$as_echo "$POTENTIAL_CXX" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_path_POTENTIAL_CXX"; then
- ac_pt_POTENTIAL_CXX=$POTENTIAL_CXX
- # Extract the first word of "$SEARCH_LIST", so it can be a program name with args.
-set dummy $SEARCH_LIST; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_ac_pt_POTENTIAL_CXX+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $ac_pt_POTENTIAL_CXX in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_ac_pt_POTENTIAL_CXX="$ac_pt_POTENTIAL_CXX" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_ac_pt_POTENTIAL_CXX="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-ac_pt_POTENTIAL_CXX=$ac_cv_path_ac_pt_POTENTIAL_CXX
-if test -n "$ac_pt_POTENTIAL_CXX"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_POTENTIAL_CXX" >&5
-$as_echo "$ac_pt_POTENTIAL_CXX" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
- if test "x$ac_pt_POTENTIAL_CXX" = x; then
- POTENTIAL_CXX=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- POTENTIAL_CXX=$ac_pt_POTENTIAL_CXX
- fi
-else
- POTENTIAL_CXX="$ac_cv_path_POTENTIAL_CXX"
-fi
-
- CXX=$POTENTIAL_CXX
- fi
-
- if test "x$CXX" = x; then
-
- # Print a helpful message on how to acquire the necessary build dependency.
- # devkit is the help tag: freetype, cups, alsa etc
- MISSING_DEPENDENCY=devkit
-
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- cygwin_help $MISSING_DEPENDENCY
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- msys_help $MISSING_DEPENDENCY
- else
- PKGHANDLER_COMMAND=
-
- case $PKGHANDLER in
- apt-get)
- apt_help $MISSING_DEPENDENCY ;;
- yum)
- yum_help $MISSING_DEPENDENCY ;;
- brew)
- brew_help $MISSING_DEPENDENCY ;;
- port)
- port_help $MISSING_DEPENDENCY ;;
- pkgutil)
- pkgutil_help $MISSING_DEPENDENCY ;;
- pkgadd)
- pkgadd_help $MISSING_DEPENDENCY ;;
- esac
-
- if test "x$PKGHANDLER_COMMAND" != x; then
- HELP_MSG="You might be able to fix this by running '$PKGHANDLER_COMMAND'."
- fi
- fi
-
- as_fn_error $? "Could not find a $COMPILER_NAME compiler. $HELP_MSG" "$LINENO" 5
- fi
- fi
-
- # Now we have a compiler binary in CXX. Make sure it's okay.
-
- # Only process if variable expands to non-empty
-
- if test "x$CXX" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$CXX"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path=`$CYGPATH -u "$path"`
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path=`$CYGPATH -u "$path"`
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of CXX, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of CXX, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of CXX" "$LINENO" 5
- fi
- fi
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file presence.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- # Short path failed, file does not exist as specified.
- # Try adding .exe or .cmd
- if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
- elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of CXX, which resolves as \"$new_path\", is invalid." >&5
-$as_echo "$as_me: The path of CXX, which resolves as \"$new_path\", is invalid." >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&5
-$as_echo "$as_me: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&6;}
- as_fn_error $? "Cannot locate the the path of CXX" "$LINENO" 5
- fi
- else
- input_to_shortpath="$new_path"
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
- new_path="$input_to_shortpath"
-
- input_path="$input_to_shortpath"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $input_to_shortpath | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$CXX"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
-
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in MSYS causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- fi
-
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of CXX, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of CXX, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of CXX" "$LINENO" 5
- fi
- fi
-
- # Now new_path has a complete unix path to the binary
- if test "x`$ECHO $new_path | $GREP ^/bin/`" != x; then
- # Keep paths in /bin as-is, but remove trailing .exe if any
- new_path="${new_path/%.exe/}"
- # Do not save /bin paths to all_fixpath_prefixes!
- else
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $new_path`
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
- # Output is in $new_path
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
- fi
-
- else
- # We're on a unix platform. Hooray! :)
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$CXX"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Cannot rely on the command "which" here since it doesn't always work.
- is_absolute_path=`$ECHO "$path" | $GREP ^/`
- if test -z "$is_absolute_path"; then
- # Path to executable is not absolute. Find it.
- IFS_save="$IFS"
- IFS=:
- for p in $PATH; do
- if test -f "$p/$path" && test -x "$p/$path"; then
- new_path="$p/$path"
- break
- fi
- done
- IFS="$IFS_save"
- else
- # This is an absolute path, we can use it without further modifications.
- new_path="$path"
- fi
-
- if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of CXX, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of CXX, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
-$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of CXX" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
-
- if test "x$complete" != "x$new_complete"; then
- CXX="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting CXX to \"$new_complete\"" >&5
-$as_echo "$as_me: Rewriting CXX to \"$new_complete\"" >&6;}
- fi
- fi
-
- TEST_COMPILER="$CXX"
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking resolved symbolic links for CXX" >&5
-$as_echo_n "checking resolved symbolic links for CXX... " >&6; }
- SYMLINK_ORIGINAL="$TEST_COMPILER"
-
- if test "x$OPENJDK_BUILD_OS" != xwindows; then
- # Follow a chain of symbolic links. Use readlink
- # where it exists, else fall back to horribly
- # complicated shell code.
- if test "x$READLINK_TESTED" != yes; then
- # On MacOSX there is a readlink tool with a different
- # purpose than the GNU readlink tool. Check the found readlink.
- ISGNU=`$READLINK --version 2>&1 | $GREP GNU`
- if test "x$ISGNU" = x; then
- # A readlink that we do not know how to use.
- # Are there other non-GNU readlinks out there?
- READLINK_TESTED=yes
- READLINK=
- fi
- fi
-
- if test "x$READLINK" != x; then
- SYMLINK_ORIGINAL=`$READLINK -f $SYMLINK_ORIGINAL`
- else
- # Save the current directory for restoring afterwards
- STARTDIR=$PWD
- COUNTER=0
- sym_link_dir=`$DIRNAME $SYMLINK_ORIGINAL`
- sym_link_file=`$BASENAME $SYMLINK_ORIGINAL`
- cd $sym_link_dir
- # Use -P flag to resolve symlinks in directories.
- cd `$THEPWDCMD -P`
- sym_link_dir=`$THEPWDCMD -P`
- # Resolve file symlinks
- while test $COUNTER -lt 20; do
- ISLINK=`$LS -l $sym_link_dir/$sym_link_file | $GREP '\->' | $SED -e 's/.*-> \(.*\)/\1/'`
- if test "x$ISLINK" == x; then
- # This is not a symbolic link! We are done!
- break
- fi
- # Again resolve directory symlinks since the target of the just found
- # link could be in a different directory
- cd `$DIRNAME $ISLINK`
- sym_link_dir=`$THEPWDCMD -P`
- sym_link_file=`$BASENAME $ISLINK`
- let COUNTER=COUNTER+1
- done
- cd $STARTDIR
- SYMLINK_ORIGINAL=$sym_link_dir/$sym_link_file
- fi
- fi
-
- if test "x$TEST_COMPILER" = "x$SYMLINK_ORIGINAL"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no symlink" >&5
-$as_echo "no symlink" >&6; }
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $SYMLINK_ORIGINAL" >&5
-$as_echo "$SYMLINK_ORIGINAL" >&6; }
-
- # We can't handle ccache by gcc wrappers, since we need to know if we're
- # using ccache. Instead ccache usage must be controlled by a configure option.
- COMPILER_BASENAME=`$BASENAME "$SYMLINK_ORIGINAL"`
- if test "x$COMPILER_BASENAME" = "xccache"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Please use --enable-ccache instead of providing a wrapped compiler." >&5
-$as_echo "$as_me: Please use --enable-ccache instead of providing a wrapped compiler." >&6;}
- as_fn_error $? "$TEST_COMPILER is a symbolic link to ccache. This is not supported." "$LINENO" 5
- fi
- fi
-
-
- COMPILER=$CXX
- COMPILER_NAME=$COMPILER_NAME
-
- if test "x$TOOLCHAIN_TYPE" = xsolstudio; then
- # cc -V output typically looks like
- # cc: Sun C 5.12 Linux_i386 2011/11/16
- # or
- # cc: Studio 12.5 Sun C 5.14 SunOS_sparc 2016/05/31
- COMPILER_VERSION_OUTPUT=`$COMPILER -V 2>&1`
- # Check that this is likely to be the Solaris Studio cc.
- $ECHO "$COMPILER_VERSION_OUTPUT" | $GREP "^.* Sun $COMPILER_NAME" > /dev/null
- if test $? -ne 0; then
- ALT_VERSION_OUTPUT=`$COMPILER --version 2>&1`
- { $as_echo "$as_me:${as_lineno-$LINENO}: The $COMPILER_NAME compiler (located as $COMPILER) does not seem to be the required $TOOLCHAIN_TYPE compiler." >&5
-$as_echo "$as_me: The $COMPILER_NAME compiler (located as $COMPILER) does not seem to be the required $TOOLCHAIN_TYPE compiler." >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: The result from running with -V was: \"$COMPILER_VERSION_OUTPUT\"" >&5
-$as_echo "$as_me: The result from running with -V was: \"$COMPILER_VERSION_OUTPUT\"" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: The result from running with --version was: \"$ALT_VERSION_OUTPUT\"" >&5
-$as_echo "$as_me: The result from running with --version was: \"$ALT_VERSION_OUTPUT\"" >&6;}
- as_fn_error $? "A $TOOLCHAIN_TYPE compiler is required. Try setting --with-tools-dir." "$LINENO" 5
- fi
- # Remove usage instructions (if present), and
- # collapse compiler output into a single line
- COMPILER_VERSION_STRING=`$ECHO $COMPILER_VERSION_OUTPUT | \
- $SED -e 's/ *[Uu]sage:.*//'`
- COMPILER_VERSION_NUMBER=`$ECHO $COMPILER_VERSION_OUTPUT | \
- $SED -e "s/^.*[ ,\t]$COMPILER_NAME[ ,\t]\([1-9]\.[0-9][0-9]*\).*/\1/"`
- elif test "x$TOOLCHAIN_TYPE" = xxlc; then
- # xlc -qversion output typically looks like
- # IBM XL C/C++ for AIX, V11.1 (5724-X13)
- # Version: 11.01.0000.0015
- COMPILER_VERSION_OUTPUT=`$COMPILER -qversion 2>&1`
- # Check that this is likely to be the IBM XL C compiler.
- $ECHO "$COMPILER_VERSION_OUTPUT" | $GREP "IBM XL C" > /dev/null
- if test $? -ne 0; then
- ALT_VERSION_OUTPUT=`$COMPILER --version 2>&1`
- { $as_echo "$as_me:${as_lineno-$LINENO}: The $COMPILER_NAME compiler (located as $COMPILER) does not seem to be the required $TOOLCHAIN_TYPE compiler." >&5
-$as_echo "$as_me: The $COMPILER_NAME compiler (located as $COMPILER) does not seem to be the required $TOOLCHAIN_TYPE compiler." >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: The result from running with -qversion was: \"$COMPILER_VERSION_OUTPUT\"" >&5
-$as_echo "$as_me: The result from running with -qversion was: \"$COMPILER_VERSION_OUTPUT\"" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: The result from running with --version was: \"$ALT_VERSION_OUTPUT\"" >&5
-$as_echo "$as_me: The result from running with --version was: \"$ALT_VERSION_OUTPUT\"" >&6;}
- as_fn_error $? "A $TOOLCHAIN_TYPE compiler is required. Try setting --with-tools-dir." "$LINENO" 5
- fi
- # Collapse compiler output into a single line
- COMPILER_VERSION_STRING=`$ECHO $COMPILER_VERSION_OUTPUT`
- COMPILER_VERSION_NUMBER=`$ECHO $COMPILER_VERSION_OUTPUT | \
- $SED -e 's/^.*, V\([1-9][0-9.]*\).*$/\1/'`
- elif test "x$TOOLCHAIN_TYPE" = xmicrosoft; then
- # There is no specific version flag, but all output starts with a version string.
- # First line typically looks something like:
- # Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 16.00.40219.01 for 80x86
- COMPILER_VERSION_OUTPUT=`$COMPILER 2>&1 | $HEAD -n 1 | $TR -d '\r'`
- # Check that this is likely to be Microsoft CL.EXE.
- $ECHO "$COMPILER_VERSION_OUTPUT" | $GREP "Microsoft.*Compiler" > /dev/null
- if test $? -ne 0; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The $COMPILER_NAME compiler (located as $COMPILER) does not seem to be the required $TOOLCHAIN_TYPE compiler." >&5
-$as_echo "$as_me: The $COMPILER_NAME compiler (located as $COMPILER) does not seem to be the required $TOOLCHAIN_TYPE compiler." >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: The result from running it was: \"$COMPILER_VERSION_OUTPUT\"" >&5
-$as_echo "$as_me: The result from running it was: \"$COMPILER_VERSION_OUTPUT\"" >&6;}
- as_fn_error $? "A $TOOLCHAIN_TYPE compiler is required. Try setting --with-tools-dir." "$LINENO" 5
- fi
- # Collapse compiler output into a single line
- COMPILER_VERSION_STRING=`$ECHO $COMPILER_VERSION_OUTPUT`
- COMPILER_VERSION_NUMBER=`$ECHO $COMPILER_VERSION_OUTPUT | \
- $SED -e 's/^.*ersion.\([1-9][0-9.]*\) .*$/\1/'`
- elif test "x$TOOLCHAIN_TYPE" = xgcc; then
- # gcc --version output typically looks like
- # gcc (Ubuntu/Linaro 4.8.1-10ubuntu9) 4.8.1
- # Copyright (C) 2013 Free Software Foundation, Inc.
- # This is free software; see the source for copying conditions. There is NO
- # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- COMPILER_VERSION_OUTPUT=`$COMPILER --version 2>&1`
- # Check that this is likely to be GCC.
- $ECHO "$COMPILER_VERSION_OUTPUT" | $GREP "Free Software Foundation" > /dev/null
- if test $? -ne 0; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The $COMPILER_NAME compiler (located as $COMPILER) does not seem to be the required $TOOLCHAIN_TYPE compiler." >&5
-$as_echo "$as_me: The $COMPILER_NAME compiler (located as $COMPILER) does not seem to be the required $TOOLCHAIN_TYPE compiler." >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: The result from running with --version was: \"$COMPILER_VERSION\"" >&5
-$as_echo "$as_me: The result from running with --version was: \"$COMPILER_VERSION\"" >&6;}
- as_fn_error $? "A $TOOLCHAIN_TYPE compiler is required. Try setting --with-tools-dir." "$LINENO" 5
- fi
- # Remove Copyright and legalese from version string, and
- # collapse into a single line
- COMPILER_VERSION_STRING=`$ECHO $COMPILER_VERSION_OUTPUT | \
- $SED -e 's/ *Copyright .*//'`
- COMPILER_VERSION_NUMBER=`$ECHO $COMPILER_VERSION_OUTPUT | \
- $SED -e 's/^.* \([1-9]\.[0-9.]*\)[^0-9.].*$/\1/'`
- elif test "x$TOOLCHAIN_TYPE" = xclang; then
- # clang --version output typically looks like
- # Apple LLVM version 5.0 (clang-500.2.79) (based on LLVM 3.3svn)
- # clang version 3.3 (tags/RELEASE_33/final)
- # or
- # Debian clang version 3.2-7ubuntu1 (tags/RELEASE_32/final) (based on LLVM 3.2)
- # Target: x86_64-pc-linux-gnu
- # Thread model: posix
- COMPILER_VERSION_OUTPUT=`$COMPILER --version 2>&1`
- # Check that this is likely to be clang
- $ECHO "$COMPILER_VERSION_OUTPUT" | $GREP "clang" > /dev/null
- if test $? -ne 0; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The $COMPILER_NAME compiler (located as $COMPILER) does not seem to be the required $TOOLCHAIN_TYPE compiler." >&5
-$as_echo "$as_me: The $COMPILER_NAME compiler (located as $COMPILER) does not seem to be the required $TOOLCHAIN_TYPE compiler." >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: The result from running with --version was: \"$COMPILER_VERSION_OUTPUT\"" >&5
-$as_echo "$as_me: The result from running with --version was: \"$COMPILER_VERSION_OUTPUT\"" >&6;}
- as_fn_error $? "A $TOOLCHAIN_TYPE compiler is required. Try setting --with-tools-dir." "$LINENO" 5
- fi
- # Collapse compiler output into a single line
- COMPILER_VERSION_STRING=`$ECHO $COMPILER_VERSION_OUTPUT`
- COMPILER_VERSION_NUMBER=`$ECHO $COMPILER_VERSION_OUTPUT | \
- $SED -e 's/^.* version \([1-9][0-9.]*\).*$/\1/'`
- else
- as_fn_error $? "Unknown toolchain type $TOOLCHAIN_TYPE." "$LINENO" 5
- fi
- # This sets CC_VERSION_NUMBER or CXX_VERSION_NUMBER. (This comment is a grep marker)
- CXX_VERSION_NUMBER="$COMPILER_VERSION_NUMBER"
- # This sets CC_VERSION_STRING or CXX_VERSION_STRING. (This comment is a grep marker)
- CXX_VERSION_STRING="$COMPILER_VERSION_STRING"
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: Using $TOOLCHAIN_TYPE $COMPILER_NAME compiler version $COMPILER_VERSION_NUMBER [$COMPILER_VERSION_STRING]" >&5
-$as_echo "$as_me: Using $TOOLCHAIN_TYPE $COMPILER_NAME compiler version $COMPILER_VERSION_NUMBER [$COMPILER_VERSION_STRING]" >&6;}
-
-
- # Now that we have resolved CXX ourself, let autoconf have its go at it
- ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-if test -z "$CXX"; then
- if test -n "$CCC"; then
- CXX=$CCC
- else
- if test -n "$ac_tool_prefix"; then
- for ac_prog in $CXX
- do
- # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CXX+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$CXX"; then
- ac_cv_prog_CXX="$CXX" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_CXX="$ac_tool_prefix$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-CXX=$ac_cv_prog_CXX
-if test -n "$CXX"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXX" >&5
-$as_echo "$CXX" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$CXX" && break
- done
-fi
-if test -z "$CXX"; then
- ac_ct_CXX=$CXX
- for ac_prog in $CXX
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_CXX+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_CXX"; then
- ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_CXX="$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_CXX=$ac_cv_prog_ac_ct_CXX
-if test -n "$ac_ct_CXX"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CXX" >&5
-$as_echo "$ac_ct_CXX" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$ac_ct_CXX" && break
-done
-
- if test "x$ac_ct_CXX" = x; then
- CXX="g++"
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- CXX=$ac_ct_CXX
- fi
-fi
-
- fi
-fi
-# Provide some information about the compiler.
-$as_echo "$as_me:${as_lineno-$LINENO}: checking for C++ compiler version" >&5
-set X $ac_compile
-ac_compiler=$2
-for ac_option in --version -v -V -qversion; do
- { { ac_try="$ac_compiler $ac_option >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_compiler $ac_option >&5") 2>conftest.err
- ac_status=$?
- if test -s conftest.err; then
- sed '10a\
-... rest of stderr output deleted ...
- 10q' conftest.err >conftest.er1
- cat conftest.er1 >&5
- fi
- rm -f conftest.er1 conftest.err
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }
-done
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C++ compiler" >&5
-$as_echo_n "checking whether we are using the GNU C++ compiler... " >&6; }
-if ${ac_cv_cxx_compiler_gnu+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-#ifndef __GNUC__
- choke me
-#endif
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_cxx_try_compile "$LINENO"; then :
- ac_compiler_gnu=yes
-else
- ac_compiler_gnu=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-ac_cv_cxx_compiler_gnu=$ac_compiler_gnu
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_cxx_compiler_gnu" >&5
-$as_echo "$ac_cv_cxx_compiler_gnu" >&6; }
-if test $ac_compiler_gnu = yes; then
- GXX=yes
-else
- GXX=
-fi
-ac_test_CXXFLAGS=${CXXFLAGS+set}
-ac_save_CXXFLAGS=$CXXFLAGS
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -g" >&5
-$as_echo_n "checking whether $CXX accepts -g... " >&6; }
-if ${ac_cv_prog_cxx_g+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_save_cxx_werror_flag=$ac_cxx_werror_flag
- ac_cxx_werror_flag=yes
- ac_cv_prog_cxx_g=no
- CXXFLAGS="-g"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_cxx_try_compile "$LINENO"; then :
- ac_cv_prog_cxx_g=yes
-else
- CXXFLAGS=""
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_cxx_try_compile "$LINENO"; then :
-
-else
- ac_cxx_werror_flag=$ac_save_cxx_werror_flag
- CXXFLAGS="-g"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_cxx_try_compile "$LINENO"; then :
- ac_cv_prog_cxx_g=yes
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- ac_cxx_werror_flag=$ac_save_cxx_werror_flag
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cxx_g" >&5
-$as_echo "$ac_cv_prog_cxx_g" >&6; }
-if test "$ac_test_CXXFLAGS" = set; then
- CXXFLAGS=$ac_save_CXXFLAGS
-elif test $ac_cv_prog_cxx_g = yes; then
- if test "$GXX" = yes; then
- CXXFLAGS="-g -O2"
- else
- CXXFLAGS="-g"
- fi
-else
- if test "$GXX" = yes; then
- CXXFLAGS="-O2"
- else
- CXXFLAGS=
- fi
-fi
-ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
-
- # This is the compiler version number on the form X.Y[.Z]
-
-
-
-
- if test "x$CC_VERSION_NUMBER" != "x$CXX_VERSION_NUMBER"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: C and C++ compiler have different version numbers, $CC_VERSION_NUMBER vs $CXX_VERSION_NUMBER." >&5
-$as_echo "$as_me: WARNING: C and C++ compiler have different version numbers, $CC_VERSION_NUMBER vs $CXX_VERSION_NUMBER." >&2;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: This typically indicates a broken setup, and is not supported" >&5
-$as_echo "$as_me: WARNING: This typically indicates a broken setup, and is not supported" >&2;}
- fi
-
- # We only check CC_VERSION_NUMBER since we assume CXX_VERSION_NUMBER is equal.
- if [[ "[$]CC_VERSION_NUMBER" =~ (.*\.){4} ]] ; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: C compiler version number has more than four parts (W.X.Y.Z): $CC_VERSION_NUMBER. Comparisons might be wrong." >&5
-$as_echo "$as_me: WARNING: C compiler version number has more than four parts (W.X.Y.Z): $CC_VERSION_NUMBER. Comparisons might be wrong." >&2;}
- fi
-
- if [[ "[$]CC_VERSION_NUMBER" =~ [0-9]{6} ]] ; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: C compiler version number has a part larger than 99999: $CC_VERSION_NUMBER. Comparisons might be wrong." >&5
-$as_echo "$as_me: WARNING: C compiler version number has a part larger than 99999: $CC_VERSION_NUMBER. Comparisons might be wrong." >&2;}
- fi
-
- COMPARABLE_ACTUAL_VERSION=`$AWK -F. '{ printf("%05d%05d%05d%05d\n", $1, $2, $3, $4) }' <<< "$CC_VERSION_NUMBER"`
-
-
- if test "x$TOOLCHAIN_MINIMUM_VERSION" != x; then
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- # Execute function body
-
- # Need to assign to a variable since m4 is blocked from modifying parts in [].
- REFERENCE_VERSION=$TOOLCHAIN_MINIMUM_VERSION
-
- if [[ "$REFERENCE_VERSION" =~ (.*\.){4} ]] ; then
- as_fn_error $? "Internal error: Cannot compare to $TOOLCHAIN_MINIMUM_VERSION, only four parts (W.X.Y.Z) is supported" "$LINENO" 5
- fi
-
- if [[ "$REFERENCE_VERSION" =~ [0-9]{6} ]] ; then
- as_fn_error $? "Internal error: Cannot compare to $TOOLCHAIN_MINIMUM_VERSION, only parts < 99999 is supported" "$LINENO" 5
- fi
-
- # Version comparison method inspired by http://stackoverflow.com/a/24067243
- COMPARABLE_REFERENCE_VERSION=`$AWK -F. '{ printf("%05d%05d%05d%05d\n", $1, $2, $3, $4) }' <<< "$REFERENCE_VERSION"`
-
- if test $COMPARABLE_ACTUAL_VERSION -ge $COMPARABLE_REFERENCE_VERSION ; then
- :
-
- else
- :
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: You are using $TOOLCHAIN_TYPE older than $TOOLCHAIN_MINIMUM_VERSION. This is not a supported configuration." >&5
-$as_echo "$as_me: WARNING: You are using $TOOLCHAIN_TYPE older than $TOOLCHAIN_MINIMUM_VERSION. This is not a supported configuration." >&2;}
-
-
- fi
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- fi
-
- #
- # Setup the preprocessor (CPP and CXXCPP)
- #
- ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
-$as_echo_n "checking how to run the C preprocessor... " >&6; }
-# On Suns, sometimes $CPP names a directory.
-if test -n "$CPP" && test -d "$CPP"; then
- CPP=
-fi
-if test -z "$CPP"; then
- if ${ac_cv_prog_CPP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- # Double quotes because CPP needs to be expanded
- for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
- do
- ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
- # Use a header file that comes with gcc, so configuring glibc
- # with a fresh cross-compiler works.
- # Prefer to if __STDC__ is defined, since
- # exists even on freestanding compilers.
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp. "Syntax error" is here to catch this case.
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#ifdef __STDC__
-# include
-#else
-# include
-#endif
- Syntax error
-_ACEOF
-if ac_fn_c_try_cpp "$LINENO"; then :
-
-else
- # Broken: fails on valid input.
-continue
-fi
-rm -f conftest.err conftest.i conftest.$ac_ext
-
- # OK, works on sane cases. Now check whether nonexistent headers
- # can be detected and how.
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include
-_ACEOF
-if ac_fn_c_try_cpp "$LINENO"; then :
- # Broken: success on invalid input.
-continue
-else
- # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-rm -f conftest.err conftest.i conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.i conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then :
- break
-fi
-
- done
- ac_cv_prog_CPP=$CPP
-
-fi
- CPP=$ac_cv_prog_CPP
-else
- ac_cv_prog_CPP=$CPP
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
-$as_echo "$CPP" >&6; }
-ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
- # Use a header file that comes with gcc, so configuring glibc
- # with a fresh cross-compiler works.
- # Prefer to if __STDC__ is defined, since
- # exists even on freestanding compilers.
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp. "Syntax error" is here to catch this case.
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#ifdef __STDC__
-# include
-#else
-# include
-#endif
- Syntax error
-_ACEOF
-if ac_fn_c_try_cpp "$LINENO"; then :
-
-else
- # Broken: fails on valid input.
-continue
-fi
-rm -f conftest.err conftest.i conftest.$ac_ext
-
- # OK, works on sane cases. Now check whether nonexistent headers
- # can be detected and how.
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include
-_ACEOF
-if ac_fn_c_try_cpp "$LINENO"; then :
- # Broken: success on invalid input.
-continue
-else
- # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-rm -f conftest.err conftest.i conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.i conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then :
-
-else
- { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details" "$LINENO" 5; }
-fi
-
-ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
-
- # Only process if variable expands to non-empty
-
- if test "x$CPP" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$CPP"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path=`$CYGPATH -u "$path"`
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path=`$CYGPATH -u "$path"`
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of CPP, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of CPP, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of CPP" "$LINENO" 5
- fi
- fi
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file presence.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- # Short path failed, file does not exist as specified.
- # Try adding .exe or .cmd
- if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
- elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of CPP, which resolves as \"$new_path\", is invalid." >&5
-$as_echo "$as_me: The path of CPP, which resolves as \"$new_path\", is invalid." >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&5
-$as_echo "$as_me: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&6;}
- as_fn_error $? "Cannot locate the the path of CPP" "$LINENO" 5
- fi
- else
- input_to_shortpath="$new_path"
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
- new_path="$input_to_shortpath"
-
- input_path="$input_to_shortpath"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $input_to_shortpath | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$CPP"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
-
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in MSYS causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- fi
-
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of CPP, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of CPP, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of CPP" "$LINENO" 5
- fi
- fi
-
- # Now new_path has a complete unix path to the binary
- if test "x`$ECHO $new_path | $GREP ^/bin/`" != x; then
- # Keep paths in /bin as-is, but remove trailing .exe if any
- new_path="${new_path/%.exe/}"
- # Do not save /bin paths to all_fixpath_prefixes!
- else
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $new_path`
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
- # Output is in $new_path
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
- fi
-
- else
- # We're on a unix platform. Hooray! :)
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$CPP"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Cannot rely on the command "which" here since it doesn't always work.
- is_absolute_path=`$ECHO "$path" | $GREP ^/`
- if test -z "$is_absolute_path"; then
- # Path to executable is not absolute. Find it.
- IFS_save="$IFS"
- IFS=:
- for p in $PATH; do
- if test -f "$p/$path" && test -x "$p/$path"; then
- new_path="$p/$path"
- break
- fi
- done
- IFS="$IFS_save"
- else
- # This is an absolute path, we can use it without further modifications.
- new_path="$path"
- fi
-
- if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of CPP, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of CPP, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
-$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of CPP" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
-
- if test "x$complete" != "x$new_complete"; then
- CPP="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting CPP to \"$new_complete\"" >&5
-$as_echo "$as_me: Rewriting CPP to \"$new_complete\"" >&6;}
- fi
- fi
-
- ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C++ preprocessor" >&5
-$as_echo_n "checking how to run the C++ preprocessor... " >&6; }
-if test -z "$CXXCPP"; then
- if ${ac_cv_prog_CXXCPP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- # Double quotes because CXXCPP needs to be expanded
- for CXXCPP in "$CXX -E" "/lib/cpp"
- do
- ac_preproc_ok=false
-for ac_cxx_preproc_warn_flag in '' yes
-do
- # Use a header file that comes with gcc, so configuring glibc
- # with a fresh cross-compiler works.
- # Prefer to if __STDC__ is defined, since
- # exists even on freestanding compilers.
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp. "Syntax error" is here to catch this case.
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#ifdef __STDC__
-# include
-#else
-# include
-#endif
- Syntax error
-_ACEOF
-if ac_fn_cxx_try_cpp "$LINENO"; then :
-
-else
- # Broken: fails on valid input.
-continue
-fi
-rm -f conftest.err conftest.i conftest.$ac_ext
-
- # OK, works on sane cases. Now check whether nonexistent headers
- # can be detected and how.
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include
-_ACEOF
-if ac_fn_cxx_try_cpp "$LINENO"; then :
- # Broken: success on invalid input.
-continue
-else
- # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-rm -f conftest.err conftest.i conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.i conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then :
- break
-fi
-
- done
- ac_cv_prog_CXXCPP=$CXXCPP
-
-fi
- CXXCPP=$ac_cv_prog_CXXCPP
-else
- ac_cv_prog_CXXCPP=$CXXCPP
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXXCPP" >&5
-$as_echo "$CXXCPP" >&6; }
-ac_preproc_ok=false
-for ac_cxx_preproc_warn_flag in '' yes
-do
- # Use a header file that comes with gcc, so configuring glibc
- # with a fresh cross-compiler works.
- # Prefer to if __STDC__ is defined, since
- # exists even on freestanding compilers.
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp. "Syntax error" is here to catch this case.
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#ifdef __STDC__
-# include
-#else
-# include
-#endif
- Syntax error
-_ACEOF
-if ac_fn_cxx_try_cpp "$LINENO"; then :
-
-else
- # Broken: fails on valid input.
-continue
-fi
-rm -f conftest.err conftest.i conftest.$ac_ext
-
- # OK, works on sane cases. Now check whether nonexistent headers
- # can be detected and how.
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include
-_ACEOF
-if ac_fn_cxx_try_cpp "$LINENO"; then :
- # Broken: success on invalid input.
-continue
-else
- # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-rm -f conftest.err conftest.i conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.i conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then :
-
-else
- { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "C++ preprocessor \"$CXXCPP\" fails sanity check
-See \`config.log' for more details" "$LINENO" 5; }
-fi
-
-ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
-
- # Only process if variable expands to non-empty
-
- if test "x$CXXCPP" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$CXXCPP"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path=`$CYGPATH -u "$path"`
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path=`$CYGPATH -u "$path"`
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of CXXCPP, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of CXXCPP, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of CXXCPP" "$LINENO" 5
- fi
- fi
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file presence.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- # Short path failed, file does not exist as specified.
- # Try adding .exe or .cmd
- if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
- elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of CXXCPP, which resolves as \"$new_path\", is invalid." >&5
-$as_echo "$as_me: The path of CXXCPP, which resolves as \"$new_path\", is invalid." >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&5
-$as_echo "$as_me: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&6;}
- as_fn_error $? "Cannot locate the the path of CXXCPP" "$LINENO" 5
- fi
- else
- input_to_shortpath="$new_path"
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
- new_path="$input_to_shortpath"
-
- input_path="$input_to_shortpath"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $input_to_shortpath | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$CXXCPP"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
-
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in MSYS causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- fi
-
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of CXXCPP, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of CXXCPP, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of CXXCPP" "$LINENO" 5
- fi
- fi
-
- # Now new_path has a complete unix path to the binary
- if test "x`$ECHO $new_path | $GREP ^/bin/`" != x; then
- # Keep paths in /bin as-is, but remove trailing .exe if any
- new_path="${new_path/%.exe/}"
- # Do not save /bin paths to all_fixpath_prefixes!
- else
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $new_path`
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
- # Output is in $new_path
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
- fi
-
- else
- # We're on a unix platform. Hooray! :)
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$CXXCPP"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Cannot rely on the command "which" here since it doesn't always work.
- is_absolute_path=`$ECHO "$path" | $GREP ^/`
- if test -z "$is_absolute_path"; then
- # Path to executable is not absolute. Find it.
- IFS_save="$IFS"
- IFS=:
- for p in $PATH; do
- if test -f "$p/$path" && test -x "$p/$path"; then
- new_path="$p/$path"
- break
- fi
- done
- IFS="$IFS_save"
- else
- # This is an absolute path, we can use it without further modifications.
- new_path="$path"
- fi
-
- if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of CXXCPP, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of CXXCPP, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
-$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of CXXCPP" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
-
- if test "x$complete" != "x$new_complete"; then
- CXXCPP="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting CXXCPP to \"$new_complete\"" >&5
-$as_echo "$as_me: Rewriting CXXCPP to \"$new_complete\"" >&6;}
- fi
- fi
-
-
- #
- # Setup the linker (LD)
- #
- if test "x$TOOLCHAIN_TYPE" = xmicrosoft; then
- # In the Microsoft toolchain we have a separate LD command "link".
- # Make sure we reject /usr/bin/link (as determined in CYGWIN_LINK), which is
- # a cygwin program for something completely different.
- # Extract the first word of "link", so it can be a program name with args.
-set dummy link; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_LD+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$LD"; then
- ac_cv_prog_LD="$LD" # Let the user override the test.
-else
- ac_prog_rejected=no
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- if test "$as_dir/$ac_word$ac_exec_ext" = "$CYGWIN_LINK"; then
- ac_prog_rejected=yes
- continue
- fi
- ac_cv_prog_LD="link"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-if test $ac_prog_rejected = yes; then
- # We found a bogon in the path, so make sure we never use it.
- set dummy $ac_cv_prog_LD
- shift
- if test $# != 0; then
- # We chose a different compiler from the bogus one.
- # However, it has the same basename, so the bogon will be chosen
- # first if we set LD to just the basename; use the full file name.
- shift
- ac_cv_prog_LD="$as_dir/$ac_word${1+' '}$@"
- fi
-fi
-fi
-fi
-LD=$ac_cv_prog_LD
-if test -n "$LD"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
-$as_echo "$LD" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-
- # Only process if variable expands to non-empty
-
- if test "x$LD" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$LD"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path=`$CYGPATH -u "$path"`
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path=`$CYGPATH -u "$path"`
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of LD, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of LD, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of LD" "$LINENO" 5
- fi
- fi
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file presence.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- # Short path failed, file does not exist as specified.
- # Try adding .exe or .cmd
- if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
- elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of LD, which resolves as \"$new_path\", is invalid." >&5
-$as_echo "$as_me: The path of LD, which resolves as \"$new_path\", is invalid." >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&5
-$as_echo "$as_me: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&6;}
- as_fn_error $? "Cannot locate the the path of LD" "$LINENO" 5
- fi
- else
- input_to_shortpath="$new_path"
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
- new_path="$input_to_shortpath"
-
- input_path="$input_to_shortpath"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $input_to_shortpath | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$LD"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
-
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in MSYS causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- fi
-
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of LD, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of LD, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of LD" "$LINENO" 5
- fi
- fi
-
- # Now new_path has a complete unix path to the binary
- if test "x`$ECHO $new_path | $GREP ^/bin/`" != x; then
- # Keep paths in /bin as-is, but remove trailing .exe if any
- new_path="${new_path/%.exe/}"
- # Do not save /bin paths to all_fixpath_prefixes!
- else
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $new_path`
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
- # Output is in $new_path
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
- fi
-
- else
- # We're on a unix platform. Hooray! :)
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$LD"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Cannot rely on the command "which" here since it doesn't always work.
- is_absolute_path=`$ECHO "$path" | $GREP ^/`
- if test -z "$is_absolute_path"; then
- # Path to executable is not absolute. Find it.
- IFS_save="$IFS"
- IFS=:
- for p in $PATH; do
- if test -f "$p/$path" && test -x "$p/$path"; then
- new_path="$p/$path"
- break
- fi
- done
- IFS="$IFS_save"
- else
- # This is an absolute path, we can use it without further modifications.
- new_path="$path"
- fi
-
- if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of LD, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of LD, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
-$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of LD" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
-
- if test "x$complete" != "x$new_complete"; then
- LD="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting LD to \"$new_complete\"" >&5
-$as_echo "$as_me: Rewriting LD to \"$new_complete\"" >&6;}
- fi
- fi
-
- # Verify that we indeed succeeded with this trick.
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if the found link.exe is actually the Visual Studio linker" >&5
-$as_echo_n "checking if the found link.exe is actually the Visual Studio linker... " >&6; }
- "$LD" --version > /dev/null
- if test $? -eq 0 ; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- as_fn_error $? "This is the Cygwin link tool. Please check your PATH and rerun configure." "$LINENO" 5
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
- fi
- LDCXX="$LD"
- else
- # All other toolchains use the compiler to link.
- LD="$CC"
- LDCXX="$CXX"
- fi
-
- # FIXME: it should be CXXLD, according to standard (cf CXXCPP)
-
-
- #
- # Setup the assembler (AS)
- #
- if test "x$OPENJDK_TARGET_OS" = xsolaris; then
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${AS+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in as
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_AS+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $AS in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_AS="$AS" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_AS="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-AS=$ac_cv_path_AS
-if test -n "$AS"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AS" >&5
-$as_echo "$AS" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$AS" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !AS! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!AS!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xAS" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of AS from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of AS from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in as
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_AS+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $AS in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_AS="$AS" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_AS="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-AS=$ac_cv_path_AS
-if test -n "$AS"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AS" >&5
-$as_echo "$AS" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$AS" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$AS" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool AS= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool AS= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for AS" >&5
-$as_echo_n "checking for AS... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$AS"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool AS=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool AS=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_AS+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $AS in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_AS="$AS" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_AS="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-AS=$ac_cv_path_AS
-if test -n "$AS"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AS" >&5
-$as_echo "$AS" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$AS" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool AS=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool AS=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for AS" >&5
-$as_echo_n "checking for AS... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool AS=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
- # Only process if variable expands to non-empty
-
- if test "x$AS" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$AS"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path=`$CYGPATH -u "$path"`
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path=`$CYGPATH -u "$path"`
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of AS, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of AS, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of AS" "$LINENO" 5
- fi
- fi
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file presence.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- # Short path failed, file does not exist as specified.
- # Try adding .exe or .cmd
- if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
- elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of AS, which resolves as \"$new_path\", is invalid." >&5
-$as_echo "$as_me: The path of AS, which resolves as \"$new_path\", is invalid." >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&5
-$as_echo "$as_me: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&6;}
- as_fn_error $? "Cannot locate the the path of AS" "$LINENO" 5
- fi
- else
- input_to_shortpath="$new_path"
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
- new_path="$input_to_shortpath"
-
- input_path="$input_to_shortpath"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $input_to_shortpath | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$AS"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
-
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in MSYS causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- fi
-
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of AS, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of AS, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of AS" "$LINENO" 5
- fi
- fi
-
- # Now new_path has a complete unix path to the binary
- if test "x`$ECHO $new_path | $GREP ^/bin/`" != x; then
- # Keep paths in /bin as-is, but remove trailing .exe if any
- new_path="${new_path/%.exe/}"
- # Do not save /bin paths to all_fixpath_prefixes!
- else
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $new_path`
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
- # Output is in $new_path
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
- fi
-
- else
- # We're on a unix platform. Hooray! :)
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$AS"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Cannot rely on the command "which" here since it doesn't always work.
- is_absolute_path=`$ECHO "$path" | $GREP ^/`
- if test -z "$is_absolute_path"; then
- # Path to executable is not absolute. Find it.
- IFS_save="$IFS"
- IFS=:
- for p in $PATH; do
- if test -f "$p/$path" && test -x "$p/$path"; then
- new_path="$p/$path"
- break
- fi
- done
- IFS="$IFS_save"
- else
- # This is an absolute path, we can use it without further modifications.
- new_path="$path"
- fi
-
- if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of AS, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of AS, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
-$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of AS" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
-
- if test "x$complete" != "x$new_complete"; then
- AS="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting AS to \"$new_complete\"" >&5
-$as_echo "$as_me: Rewriting AS to \"$new_complete\"" >&6;}
- fi
- fi
-
- if test "x$AS" = x; then
- as_fn_error $? "Solaris assembler (as) is required. Please install via \"pkg install pkg:/developer/assembler\"." "$LINENO" 5
- fi
- else
- # FIXME: is this correct for microsoft?
- AS="$CC -c"
- fi
-
-
- #
- # Setup the archiver (AR)
- #
- if test "x$TOOLCHAIN_TYPE" = xmicrosoft; then
- # The corresponding ar tool is lib.exe (used to create static libraries)
- # Extract the first word of "lib", so it can be a program name with args.
-set dummy lib; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_AR+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$AR"; then
- ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_AR="lib"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-AR=$ac_cv_prog_AR
-if test -n "$AR"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
-$as_echo "$AR" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- elif test "x$TOOLCHAIN_TYPE" = xgcc; then
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${AR+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- if test -n "$ac_tool_prefix"; then
- for ac_prog in ar gcc-ar
- do
- # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_AR+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$AR"; then
- ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_AR="$ac_tool_prefix$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-AR=$ac_cv_prog_AR
-if test -n "$AR"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
-$as_echo "$AR" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$AR" && break
- done
-fi
-if test -z "$AR"; then
- ac_ct_AR=$AR
- for ac_prog in ar gcc-ar
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_AR+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_AR"; then
- ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_AR="$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_AR=$ac_cv_prog_ac_ct_AR
-if test -n "$ac_ct_AR"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
-$as_echo "$ac_ct_AR" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$ac_ct_AR" && break
-done
-
- if test "x$ac_ct_AR" = x; then
- AR=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- AR=$ac_ct_AR
- fi
-fi
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !AR! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!AR!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xAR" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of AR from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of AR from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- if test -n "$ac_tool_prefix"; then
- for ac_prog in ar gcc-ar
- do
- # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_AR+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$AR"; then
- ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_AR="$ac_tool_prefix$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-AR=$ac_cv_prog_AR
-if test -n "$AR"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
-$as_echo "$AR" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$AR" && break
- done
-fi
-if test -z "$AR"; then
- ac_ct_AR=$AR
- for ac_prog in ar gcc-ar
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_AR+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_AR"; then
- ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_AR="$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_AR=$ac_cv_prog_ac_ct_AR
-if test -n "$ac_ct_AR"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
-$as_echo "$ac_ct_AR" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$ac_ct_AR" && break
-done
-
- if test "x$ac_ct_AR" = x; then
- AR=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- AR=$ac_ct_AR
- fi
-fi
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$AR" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool AR= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool AR= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for AR" >&5
-$as_echo_n "checking for AR... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$AR"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool AR=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool AR=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_AR+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $AR in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_AR="$AR" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_AR="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-AR=$ac_cv_path_AR
-if test -n "$AR"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
-$as_echo "$AR" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$AR" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool AR=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool AR=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for AR" >&5
-$as_echo_n "checking for AR... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool AR=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
- else
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${AR+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- if test -n "$ac_tool_prefix"; then
- for ac_prog in ar
- do
- # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_AR+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$AR"; then
- ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_AR="$ac_tool_prefix$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-AR=$ac_cv_prog_AR
-if test -n "$AR"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
-$as_echo "$AR" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$AR" && break
- done
-fi
-if test -z "$AR"; then
- ac_ct_AR=$AR
- for ac_prog in ar
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_AR+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_AR"; then
- ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_AR="$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_AR=$ac_cv_prog_ac_ct_AR
-if test -n "$ac_ct_AR"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
-$as_echo "$ac_ct_AR" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$ac_ct_AR" && break
-done
-
- if test "x$ac_ct_AR" = x; then
- AR=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- AR=$ac_ct_AR
- fi
-fi
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !AR! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!AR!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xAR" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of AR from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of AR from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- if test -n "$ac_tool_prefix"; then
- for ac_prog in ar
- do
- # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_AR+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$AR"; then
- ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_AR="$ac_tool_prefix$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-AR=$ac_cv_prog_AR
-if test -n "$AR"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
-$as_echo "$AR" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$AR" && break
- done
-fi
-if test -z "$AR"; then
- ac_ct_AR=$AR
- for ac_prog in ar
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_AR+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_AR"; then
- ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_AR="$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_AR=$ac_cv_prog_ac_ct_AR
-if test -n "$ac_ct_AR"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
-$as_echo "$ac_ct_AR" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$ac_ct_AR" && break
-done
-
- if test "x$ac_ct_AR" = x; then
- AR=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- AR=$ac_ct_AR
- fi
-fi
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$AR" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool AR= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool AR= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for AR" >&5
-$as_echo_n "checking for AR... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$AR"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool AR=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool AR=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_AR+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $AR in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_AR="$AR" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_AR="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-AR=$ac_cv_path_AR
-if test -n "$AR"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
-$as_echo "$AR" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$AR" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool AR=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool AR=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for AR" >&5
-$as_echo_n "checking for AR... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool AR=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
- fi
-
- # Only process if variable expands to non-empty
-
- if test "x$AR" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$AR"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path=`$CYGPATH -u "$path"`
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path=`$CYGPATH -u "$path"`
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of AR, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of AR, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of AR" "$LINENO" 5
- fi
- fi
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file presence.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- # Short path failed, file does not exist as specified.
- # Try adding .exe or .cmd
- if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
- elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of AR, which resolves as \"$new_path\", is invalid." >&5
-$as_echo "$as_me: The path of AR, which resolves as \"$new_path\", is invalid." >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&5
-$as_echo "$as_me: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&6;}
- as_fn_error $? "Cannot locate the the path of AR" "$LINENO" 5
- fi
- else
- input_to_shortpath="$new_path"
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
- new_path="$input_to_shortpath"
-
- input_path="$input_to_shortpath"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $input_to_shortpath | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$AR"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
-
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in MSYS causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- fi
-
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of AR, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of AR, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of AR" "$LINENO" 5
- fi
- fi
-
- # Now new_path has a complete unix path to the binary
- if test "x`$ECHO $new_path | $GREP ^/bin/`" != x; then
- # Keep paths in /bin as-is, but remove trailing .exe if any
- new_path="${new_path/%.exe/}"
- # Do not save /bin paths to all_fixpath_prefixes!
- else
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $new_path`
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
- # Output is in $new_path
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
- fi
-
- else
- # We're on a unix platform. Hooray! :)
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$AR"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Cannot rely on the command "which" here since it doesn't always work.
- is_absolute_path=`$ECHO "$path" | $GREP ^/`
- if test -z "$is_absolute_path"; then
- # Path to executable is not absolute. Find it.
- IFS_save="$IFS"
- IFS=:
- for p in $PATH; do
- if test -f "$p/$path" && test -x "$p/$path"; then
- new_path="$p/$path"
- break
- fi
- done
- IFS="$IFS_save"
- else
- # This is an absolute path, we can use it without further modifications.
- new_path="$path"
- fi
-
- if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of AR, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of AR, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
-$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of AR" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
-
- if test "x$complete" != "x$new_complete"; then
- AR="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting AR to \"$new_complete\"" >&5
-$as_echo "$as_me: Rewriting AR to \"$new_complete\"" >&6;}
- fi
- fi
-
-
-
- if test "x$OPENJDK_TARGET_OS" = "xmacosx"; then
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${LIPO+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in lipo
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_LIPO+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $LIPO in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_LIPO="$LIPO" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_LIPO="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-LIPO=$ac_cv_path_LIPO
-if test -n "$LIPO"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5
-$as_echo "$LIPO" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$LIPO" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !LIPO! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!LIPO!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xLIPO" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of LIPO from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of LIPO from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in lipo
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_LIPO+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $LIPO in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_LIPO="$LIPO" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_LIPO="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-LIPO=$ac_cv_path_LIPO
-if test -n "$LIPO"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5
-$as_echo "$LIPO" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$LIPO" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$LIPO" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool LIPO= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool LIPO= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for LIPO" >&5
-$as_echo_n "checking for LIPO... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$LIPO"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool LIPO=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool LIPO=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_LIPO+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $LIPO in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_LIPO="$LIPO" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_LIPO="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-LIPO=$ac_cv_path_LIPO
-if test -n "$LIPO"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5
-$as_echo "$LIPO" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$LIPO" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool LIPO=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool LIPO=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for LIPO" >&5
-$as_echo_n "checking for LIPO... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool LIPO=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
- # Only process if variable expands to non-empty
-
- if test "x$LIPO" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$LIPO"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path=`$CYGPATH -u "$path"`
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path=`$CYGPATH -u "$path"`
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of LIPO, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of LIPO, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of LIPO" "$LINENO" 5
- fi
- fi
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file presence.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- # Short path failed, file does not exist as specified.
- # Try adding .exe or .cmd
- if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
- elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of LIPO, which resolves as \"$new_path\", is invalid." >&5
-$as_echo "$as_me: The path of LIPO, which resolves as \"$new_path\", is invalid." >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&5
-$as_echo "$as_me: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&6;}
- as_fn_error $? "Cannot locate the the path of LIPO" "$LINENO" 5
- fi
- else
- input_to_shortpath="$new_path"
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
- new_path="$input_to_shortpath"
-
- input_path="$input_to_shortpath"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $input_to_shortpath | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$LIPO"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
-
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in MSYS causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- fi
-
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of LIPO, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of LIPO, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of LIPO" "$LINENO" 5
- fi
- fi
-
- # Now new_path has a complete unix path to the binary
- if test "x`$ECHO $new_path | $GREP ^/bin/`" != x; then
- # Keep paths in /bin as-is, but remove trailing .exe if any
- new_path="${new_path/%.exe/}"
- # Do not save /bin paths to all_fixpath_prefixes!
- else
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $new_path`
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
- # Output is in $new_path
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
- fi
-
- else
- # We're on a unix platform. Hooray! :)
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$LIPO"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Cannot rely on the command "which" here since it doesn't always work.
- is_absolute_path=`$ECHO "$path" | $GREP ^/`
- if test -z "$is_absolute_path"; then
- # Path to executable is not absolute. Find it.
- IFS_save="$IFS"
- IFS=:
- for p in $PATH; do
- if test -f "$p/$path" && test -x "$p/$path"; then
- new_path="$p/$path"
- break
- fi
- done
- IFS="$IFS_save"
- else
- # This is an absolute path, we can use it without further modifications.
- new_path="$path"
- fi
-
- if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of LIPO, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of LIPO, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
-$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of LIPO" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
-
- if test "x$complete" != "x$new_complete"; then
- LIPO="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting LIPO to \"$new_complete\"" >&5
-$as_echo "$as_me: Rewriting LIPO to \"$new_complete\"" >&6;}
- fi
- fi
-
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${OTOOL+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in otool
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_OTOOL+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $OTOOL in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_OTOOL="$OTOOL" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_OTOOL="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-OTOOL=$ac_cv_path_OTOOL
-if test -n "$OTOOL"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5
-$as_echo "$OTOOL" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$OTOOL" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !OTOOL! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!OTOOL!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xOTOOL" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of OTOOL from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of OTOOL from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in otool
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_OTOOL+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $OTOOL in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_OTOOL="$OTOOL" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_OTOOL="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-OTOOL=$ac_cv_path_OTOOL
-if test -n "$OTOOL"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5
-$as_echo "$OTOOL" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$OTOOL" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$OTOOL" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool OTOOL= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool OTOOL= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for OTOOL" >&5
-$as_echo_n "checking for OTOOL... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$OTOOL"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool OTOOL=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool OTOOL=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_OTOOL+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $OTOOL in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_OTOOL="$OTOOL" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_OTOOL="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-OTOOL=$ac_cv_path_OTOOL
-if test -n "$OTOOL"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5
-$as_echo "$OTOOL" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$OTOOL" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool OTOOL=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool OTOOL=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for OTOOL" >&5
-$as_echo_n "checking for OTOOL... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool OTOOL=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
- if test "x$OTOOL" = x; then
- as_fn_error $? "Could not find required tool for OTOOL" "$LINENO" 5
- fi
-
-
-
- # Only process if variable expands to non-empty
-
- if test "x$OTOOL" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$OTOOL"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path=`$CYGPATH -u "$path"`
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path=`$CYGPATH -u "$path"`
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of OTOOL, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of OTOOL, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of OTOOL" "$LINENO" 5
- fi
- fi
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file presence.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- # Short path failed, file does not exist as specified.
- # Try adding .exe or .cmd
- if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
- elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of OTOOL, which resolves as \"$new_path\", is invalid." >&5
-$as_echo "$as_me: The path of OTOOL, which resolves as \"$new_path\", is invalid." >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&5
-$as_echo "$as_me: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&6;}
- as_fn_error $? "Cannot locate the the path of OTOOL" "$LINENO" 5
- fi
- else
- input_to_shortpath="$new_path"
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
- new_path="$input_to_shortpath"
-
- input_path="$input_to_shortpath"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $input_to_shortpath | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$OTOOL"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
-
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in MSYS causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- fi
-
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of OTOOL, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of OTOOL, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of OTOOL" "$LINENO" 5
- fi
- fi
-
- # Now new_path has a complete unix path to the binary
- if test "x`$ECHO $new_path | $GREP ^/bin/`" != x; then
- # Keep paths in /bin as-is, but remove trailing .exe if any
- new_path="${new_path/%.exe/}"
- # Do not save /bin paths to all_fixpath_prefixes!
- else
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $new_path`
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
- # Output is in $new_path
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
- fi
-
- else
- # We're on a unix platform. Hooray! :)
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$OTOOL"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Cannot rely on the command "which" here since it doesn't always work.
- is_absolute_path=`$ECHO "$path" | $GREP ^/`
- if test -z "$is_absolute_path"; then
- # Path to executable is not absolute. Find it.
- IFS_save="$IFS"
- IFS=:
- for p in $PATH; do
- if test -f "$p/$path" && test -x "$p/$path"; then
- new_path="$p/$path"
- break
- fi
- done
- IFS="$IFS_save"
- else
- # This is an absolute path, we can use it without further modifications.
- new_path="$path"
- fi
-
- if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of OTOOL, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of OTOOL, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
-$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of OTOOL" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
-
- if test "x$complete" != "x$new_complete"; then
- OTOOL="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting OTOOL to \"$new_complete\"" >&5
-$as_echo "$as_me: Rewriting OTOOL to \"$new_complete\"" >&6;}
- fi
- fi
-
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${INSTALL_NAME_TOOL+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in install_name_tool
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_INSTALL_NAME_TOOL+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $INSTALL_NAME_TOOL in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_INSTALL_NAME_TOOL="$INSTALL_NAME_TOOL" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_INSTALL_NAME_TOOL="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-INSTALL_NAME_TOOL=$ac_cv_path_INSTALL_NAME_TOOL
-if test -n "$INSTALL_NAME_TOOL"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL_NAME_TOOL" >&5
-$as_echo "$INSTALL_NAME_TOOL" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$INSTALL_NAME_TOOL" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !INSTALL_NAME_TOOL! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!INSTALL_NAME_TOOL!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xINSTALL_NAME_TOOL" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of INSTALL_NAME_TOOL from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of INSTALL_NAME_TOOL from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in install_name_tool
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_INSTALL_NAME_TOOL+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $INSTALL_NAME_TOOL in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_INSTALL_NAME_TOOL="$INSTALL_NAME_TOOL" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_INSTALL_NAME_TOOL="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-INSTALL_NAME_TOOL=$ac_cv_path_INSTALL_NAME_TOOL
-if test -n "$INSTALL_NAME_TOOL"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL_NAME_TOOL" >&5
-$as_echo "$INSTALL_NAME_TOOL" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$INSTALL_NAME_TOOL" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$INSTALL_NAME_TOOL" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool INSTALL_NAME_TOOL= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool INSTALL_NAME_TOOL= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for INSTALL_NAME_TOOL" >&5
-$as_echo_n "checking for INSTALL_NAME_TOOL... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$INSTALL_NAME_TOOL"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool INSTALL_NAME_TOOL=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool INSTALL_NAME_TOOL=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_INSTALL_NAME_TOOL+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $INSTALL_NAME_TOOL in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_INSTALL_NAME_TOOL="$INSTALL_NAME_TOOL" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_INSTALL_NAME_TOOL="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-INSTALL_NAME_TOOL=$ac_cv_path_INSTALL_NAME_TOOL
-if test -n "$INSTALL_NAME_TOOL"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL_NAME_TOOL" >&5
-$as_echo "$INSTALL_NAME_TOOL" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$INSTALL_NAME_TOOL" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool INSTALL_NAME_TOOL=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool INSTALL_NAME_TOOL=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for INSTALL_NAME_TOOL" >&5
-$as_echo_n "checking for INSTALL_NAME_TOOL... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool INSTALL_NAME_TOOL=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
- if test "x$INSTALL_NAME_TOOL" = x; then
- as_fn_error $? "Could not find required tool for INSTALL_NAME_TOOL" "$LINENO" 5
- fi
-
-
-
- # Only process if variable expands to non-empty
-
- if test "x$INSTALL_NAME_TOOL" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$INSTALL_NAME_TOOL"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path=`$CYGPATH -u "$path"`
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path=`$CYGPATH -u "$path"`
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of INSTALL_NAME_TOOL, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of INSTALL_NAME_TOOL, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of INSTALL_NAME_TOOL" "$LINENO" 5
- fi
- fi
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file presence.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- # Short path failed, file does not exist as specified.
- # Try adding .exe or .cmd
- if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
- elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of INSTALL_NAME_TOOL, which resolves as \"$new_path\", is invalid." >&5
-$as_echo "$as_me: The path of INSTALL_NAME_TOOL, which resolves as \"$new_path\", is invalid." >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&5
-$as_echo "$as_me: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&6;}
- as_fn_error $? "Cannot locate the the path of INSTALL_NAME_TOOL" "$LINENO" 5
- fi
- else
- input_to_shortpath="$new_path"
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
- new_path="$input_to_shortpath"
-
- input_path="$input_to_shortpath"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $input_to_shortpath | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$INSTALL_NAME_TOOL"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
-
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in MSYS causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- fi
-
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of INSTALL_NAME_TOOL, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of INSTALL_NAME_TOOL, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of INSTALL_NAME_TOOL" "$LINENO" 5
- fi
- fi
-
- # Now new_path has a complete unix path to the binary
- if test "x`$ECHO $new_path | $GREP ^/bin/`" != x; then
- # Keep paths in /bin as-is, but remove trailing .exe if any
- new_path="${new_path/%.exe/}"
- # Do not save /bin paths to all_fixpath_prefixes!
- else
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $new_path`
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
- # Output is in $new_path
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
- fi
-
- else
- # We're on a unix platform. Hooray! :)
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$INSTALL_NAME_TOOL"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Cannot rely on the command "which" here since it doesn't always work.
- is_absolute_path=`$ECHO "$path" | $GREP ^/`
- if test -z "$is_absolute_path"; then
- # Path to executable is not absolute. Find it.
- IFS_save="$IFS"
- IFS=:
- for p in $PATH; do
- if test -f "$p/$path" && test -x "$p/$path"; then
- new_path="$p/$path"
- break
- fi
- done
- IFS="$IFS_save"
- else
- # This is an absolute path, we can use it without further modifications.
- new_path="$path"
- fi
-
- if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of INSTALL_NAME_TOOL, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of INSTALL_NAME_TOOL, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
-$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of INSTALL_NAME_TOOL" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
-
- if test "x$complete" != "x$new_complete"; then
- INSTALL_NAME_TOOL="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting INSTALL_NAME_TOOL to \"$new_complete\"" >&5
-$as_echo "$as_me: Rewriting INSTALL_NAME_TOOL to \"$new_complete\"" >&6;}
- fi
- fi
-
- fi
-
- if test "x$TOOLCHAIN_TYPE" = xmicrosoft; then
- # Extract the first word of "mt", so it can be a program name with args.
-set dummy mt; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_MT+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$MT"; then
- ac_cv_prog_MT="$MT" # Let the user override the test.
-else
- ac_prog_rejected=no
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/bin/mt"; then
- ac_prog_rejected=yes
- continue
- fi
- ac_cv_prog_MT="mt"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-if test $ac_prog_rejected = yes; then
- # We found a bogon in the path, so make sure we never use it.
- set dummy $ac_cv_prog_MT
- shift
- if test $# != 0; then
- # We chose a different compiler from the bogus one.
- # However, it has the same basename, so the bogon will be chosen
- # first if we set MT to just the basename; use the full file name.
- shift
- ac_cv_prog_MT="$as_dir/$ac_word${1+' '}$@"
- fi
-fi
-fi
-fi
-MT=$ac_cv_prog_MT
-if test -n "$MT"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MT" >&5
-$as_echo "$MT" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-
- # Only process if variable expands to non-empty
-
- if test "x$MT" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$MT"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path=`$CYGPATH -u "$path"`
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path=`$CYGPATH -u "$path"`
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of MT, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of MT, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of MT" "$LINENO" 5
- fi
- fi
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file presence.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- # Short path failed, file does not exist as specified.
- # Try adding .exe or .cmd
- if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
- elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of MT, which resolves as \"$new_path\", is invalid." >&5
-$as_echo "$as_me: The path of MT, which resolves as \"$new_path\", is invalid." >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&5
-$as_echo "$as_me: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&6;}
- as_fn_error $? "Cannot locate the the path of MT" "$LINENO" 5
- fi
- else
- input_to_shortpath="$new_path"
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
- new_path="$input_to_shortpath"
-
- input_path="$input_to_shortpath"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $input_to_shortpath | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$MT"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
-
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in MSYS causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- fi
-
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of MT, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of MT, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of MT" "$LINENO" 5
- fi
- fi
-
- # Now new_path has a complete unix path to the binary
- if test "x`$ECHO $new_path | $GREP ^/bin/`" != x; then
- # Keep paths in /bin as-is, but remove trailing .exe if any
- new_path="${new_path/%.exe/}"
- # Do not save /bin paths to all_fixpath_prefixes!
- else
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $new_path`
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
- # Output is in $new_path
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
- fi
-
- else
- # We're on a unix platform. Hooray! :)
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$MT"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Cannot rely on the command "which" here since it doesn't always work.
- is_absolute_path=`$ECHO "$path" | $GREP ^/`
- if test -z "$is_absolute_path"; then
- # Path to executable is not absolute. Find it.
- IFS_save="$IFS"
- IFS=:
- for p in $PATH; do
- if test -f "$p/$path" && test -x "$p/$path"; then
- new_path="$p/$path"
- break
- fi
- done
- IFS="$IFS_save"
- else
- # This is an absolute path, we can use it without further modifications.
- new_path="$path"
- fi
-
- if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of MT, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of MT, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
-$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of MT" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
-
- if test "x$complete" != "x$new_complete"; then
- MT="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting MT to \"$new_complete\"" >&5
-$as_echo "$as_me: Rewriting MT to \"$new_complete\"" >&6;}
- fi
- fi
-
- # Setup the resource compiler (RC)
- # Extract the first word of "rc", so it can be a program name with args.
-set dummy rc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_RC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$RC"; then
- ac_cv_prog_RC="$RC" # Let the user override the test.
-else
- ac_prog_rejected=no
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/bin/rc"; then
- ac_prog_rejected=yes
- continue
- fi
- ac_cv_prog_RC="rc"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-if test $ac_prog_rejected = yes; then
- # We found a bogon in the path, so make sure we never use it.
- set dummy $ac_cv_prog_RC
- shift
- if test $# != 0; then
- # We chose a different compiler from the bogus one.
- # However, it has the same basename, so the bogon will be chosen
- # first if we set RC to just the basename; use the full file name.
- shift
- ac_cv_prog_RC="$as_dir/$ac_word${1+' '}$@"
- fi
-fi
-fi
-fi
-RC=$ac_cv_prog_RC
-if test -n "$RC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RC" >&5
-$as_echo "$RC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-
- # Only process if variable expands to non-empty
-
- if test "x$RC" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$RC"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path=`$CYGPATH -u "$path"`
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path=`$CYGPATH -u "$path"`
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of RC, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of RC, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of RC" "$LINENO" 5
- fi
- fi
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file presence.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- # Short path failed, file does not exist as specified.
- # Try adding .exe or .cmd
- if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
- elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of RC, which resolves as \"$new_path\", is invalid." >&5
-$as_echo "$as_me: The path of RC, which resolves as \"$new_path\", is invalid." >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&5
-$as_echo "$as_me: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&6;}
- as_fn_error $? "Cannot locate the the path of RC" "$LINENO" 5
- fi
- else
- input_to_shortpath="$new_path"
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
- new_path="$input_to_shortpath"
-
- input_path="$input_to_shortpath"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $input_to_shortpath | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$RC"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
-
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in MSYS causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- fi
-
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of RC, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of RC, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of RC" "$LINENO" 5
- fi
- fi
-
- # Now new_path has a complete unix path to the binary
- if test "x`$ECHO $new_path | $GREP ^/bin/`" != x; then
- # Keep paths in /bin as-is, but remove trailing .exe if any
- new_path="${new_path/%.exe/}"
- # Do not save /bin paths to all_fixpath_prefixes!
- else
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $new_path`
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
- # Output is in $new_path
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
- fi
-
- else
- # We're on a unix platform. Hooray! :)
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$RC"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Cannot rely on the command "which" here since it doesn't always work.
- is_absolute_path=`$ECHO "$path" | $GREP ^/`
- if test -z "$is_absolute_path"; then
- # Path to executable is not absolute. Find it.
- IFS_save="$IFS"
- IFS=:
- for p in $PATH; do
- if test -f "$p/$path" && test -x "$p/$path"; then
- new_path="$p/$path"
- break
- fi
- done
- IFS="$IFS_save"
- else
- # This is an absolute path, we can use it without further modifications.
- new_path="$path"
- fi
-
- if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of RC, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of RC, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
-$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of RC" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
-
- if test "x$complete" != "x$new_complete"; then
- RC="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting RC to \"$new_complete\"" >&5
-$as_echo "$as_me: Rewriting RC to \"$new_complete\"" >&6;}
- fi
- fi
-
- # Extract the first word of "dumpbin", so it can be a program name with args.
-set dummy dumpbin; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_DUMPBIN+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$DUMPBIN"; then
- ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_DUMPBIN="dumpbin"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-DUMPBIN=$ac_cv_prog_DUMPBIN
-if test -n "$DUMPBIN"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5
-$as_echo "$DUMPBIN" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-
- # Only process if variable expands to non-empty
-
- if test "x$DUMPBIN" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$DUMPBIN"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path=`$CYGPATH -u "$path"`
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path=`$CYGPATH -u "$path"`
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of DUMPBIN, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of DUMPBIN, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of DUMPBIN" "$LINENO" 5
- fi
- fi
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file presence.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- # Short path failed, file does not exist as specified.
- # Try adding .exe or .cmd
- if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
- elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of DUMPBIN, which resolves as \"$new_path\", is invalid." >&5
-$as_echo "$as_me: The path of DUMPBIN, which resolves as \"$new_path\", is invalid." >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&5
-$as_echo "$as_me: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&6;}
- as_fn_error $? "Cannot locate the the path of DUMPBIN" "$LINENO" 5
- fi
- else
- input_to_shortpath="$new_path"
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
- new_path="$input_to_shortpath"
-
- input_path="$input_to_shortpath"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $input_to_shortpath | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$DUMPBIN"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
-
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in MSYS causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- fi
-
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of DUMPBIN, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of DUMPBIN, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of DUMPBIN" "$LINENO" 5
- fi
- fi
-
- # Now new_path has a complete unix path to the binary
- if test "x`$ECHO $new_path | $GREP ^/bin/`" != x; then
- # Keep paths in /bin as-is, but remove trailing .exe if any
- new_path="${new_path/%.exe/}"
- # Do not save /bin paths to all_fixpath_prefixes!
- else
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $new_path`
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
- # Output is in $new_path
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
- fi
-
- else
- # We're on a unix platform. Hooray! :)
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$DUMPBIN"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Cannot rely on the command "which" here since it doesn't always work.
- is_absolute_path=`$ECHO "$path" | $GREP ^/`
- if test -z "$is_absolute_path"; then
- # Path to executable is not absolute. Find it.
- IFS_save="$IFS"
- IFS=:
- for p in $PATH; do
- if test -f "$p/$path" && test -x "$p/$path"; then
- new_path="$p/$path"
- break
- fi
- done
- IFS="$IFS_save"
- else
- # This is an absolute path, we can use it without further modifications.
- new_path="$path"
- fi
-
- if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of DUMPBIN, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of DUMPBIN, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
-$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of DUMPBIN" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
-
- if test "x$complete" != "x$new_complete"; then
- DUMPBIN="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting DUMPBIN to \"$new_complete\"" >&5
-$as_echo "$as_me: Rewriting DUMPBIN to \"$new_complete\"" >&6;}
- fi
- fi
-
- # We need to check for 'msbuild.exe' because at the place where we expect to
- # find 'msbuild.exe' there's also a directory called 'msbuild' and configure
- # won't find the 'msbuild.exe' executable in that case (and the
- # 'ac_executable_extensions' is unusable due to performance reasons).
- # Notice that we intentionally don't fix up the path to MSBUILD because we
- # will call it in a DOS shell during freetype detection on Windows (see
- # 'LIB_SETUP_FREETYPE' in "libraries.m4"
- # Extract the first word of "msbuild.exe", so it can be a program name with args.
-set dummy msbuild.exe; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_MSBUILD+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$MSBUILD"; then
- ac_cv_prog_MSBUILD="$MSBUILD" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_MSBUILD="msbuild.exe"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-MSBUILD=$ac_cv_prog_MSBUILD
-if test -n "$MSBUILD"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSBUILD" >&5
-$as_echo "$MSBUILD" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- fi
-
- if test "x$OPENJDK_TARGET_OS" = xsolaris; then
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${STRIP+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in strip
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_STRIP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $STRIP in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_STRIP="$STRIP" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_STRIP="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-STRIP=$ac_cv_path_STRIP
-if test -n "$STRIP"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
-$as_echo "$STRIP" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$STRIP" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !STRIP! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!STRIP!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xSTRIP" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of STRIP from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of STRIP from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in strip
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_STRIP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $STRIP in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_STRIP="$STRIP" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_STRIP="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-STRIP=$ac_cv_path_STRIP
-if test -n "$STRIP"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
-$as_echo "$STRIP" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$STRIP" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$STRIP" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool STRIP= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool STRIP= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for STRIP" >&5
-$as_echo_n "checking for STRIP... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$STRIP"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool STRIP=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool STRIP=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_STRIP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $STRIP in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_STRIP="$STRIP" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_STRIP="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-STRIP=$ac_cv_path_STRIP
-if test -n "$STRIP"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
-$as_echo "$STRIP" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$STRIP" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool STRIP=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool STRIP=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for STRIP" >&5
-$as_echo_n "checking for STRIP... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool STRIP=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
- # Only process if variable expands to non-empty
-
- if test "x$STRIP" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$STRIP"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path=`$CYGPATH -u "$path"`
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path=`$CYGPATH -u "$path"`
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of STRIP, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of STRIP, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of STRIP" "$LINENO" 5
- fi
- fi
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file presence.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- # Short path failed, file does not exist as specified.
- # Try adding .exe or .cmd
- if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
- elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of STRIP, which resolves as \"$new_path\", is invalid." >&5
-$as_echo "$as_me: The path of STRIP, which resolves as \"$new_path\", is invalid." >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&5
-$as_echo "$as_me: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&6;}
- as_fn_error $? "Cannot locate the the path of STRIP" "$LINENO" 5
- fi
- else
- input_to_shortpath="$new_path"
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
- new_path="$input_to_shortpath"
-
- input_path="$input_to_shortpath"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $input_to_shortpath | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$STRIP"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
-
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in MSYS causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- fi
-
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of STRIP, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of STRIP, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of STRIP" "$LINENO" 5
- fi
- fi
-
- # Now new_path has a complete unix path to the binary
- if test "x`$ECHO $new_path | $GREP ^/bin/`" != x; then
- # Keep paths in /bin as-is, but remove trailing .exe if any
- new_path="${new_path/%.exe/}"
- # Do not save /bin paths to all_fixpath_prefixes!
- else
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $new_path`
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
- # Output is in $new_path
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
- fi
-
- else
- # We're on a unix platform. Hooray! :)
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$STRIP"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Cannot rely on the command "which" here since it doesn't always work.
- is_absolute_path=`$ECHO "$path" | $GREP ^/`
- if test -z "$is_absolute_path"; then
- # Path to executable is not absolute. Find it.
- IFS_save="$IFS"
- IFS=:
- for p in $PATH; do
- if test -f "$p/$path" && test -x "$p/$path"; then
- new_path="$p/$path"
- break
- fi
- done
- IFS="$IFS_save"
- else
- # This is an absolute path, we can use it without further modifications.
- new_path="$path"
- fi
-
- if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of STRIP, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of STRIP, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
-$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of STRIP" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
-
- if test "x$complete" != "x$new_complete"; then
- STRIP="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting STRIP to \"$new_complete\"" >&5
-$as_echo "$as_me: Rewriting STRIP to \"$new_complete\"" >&6;}
- fi
- fi
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${NM+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in nm
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_NM+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $NM in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_NM="$NM" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_NM="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-NM=$ac_cv_path_NM
-if test -n "$NM"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NM" >&5
-$as_echo "$NM" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$NM" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !NM! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!NM!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xNM" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of NM from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of NM from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in nm
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_NM+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $NM in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_NM="$NM" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_NM="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-NM=$ac_cv_path_NM
-if test -n "$NM"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NM" >&5
-$as_echo "$NM" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$NM" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$NM" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool NM= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool NM= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for NM" >&5
-$as_echo_n "checking for NM... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$NM"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool NM=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool NM=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_NM+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $NM in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_NM="$NM" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_NM="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-NM=$ac_cv_path_NM
-if test -n "$NM"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NM" >&5
-$as_echo "$NM" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$NM" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool NM=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool NM=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for NM" >&5
-$as_echo_n "checking for NM... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool NM=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
- # Only process if variable expands to non-empty
-
- if test "x$NM" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$NM"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path=`$CYGPATH -u "$path"`
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path=`$CYGPATH -u "$path"`
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of NM, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of NM, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of NM" "$LINENO" 5
- fi
- fi
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file presence.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- # Short path failed, file does not exist as specified.
- # Try adding .exe or .cmd
- if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
- elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of NM, which resolves as \"$new_path\", is invalid." >&5
-$as_echo "$as_me: The path of NM, which resolves as \"$new_path\", is invalid." >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&5
-$as_echo "$as_me: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&6;}
- as_fn_error $? "Cannot locate the the path of NM" "$LINENO" 5
- fi
- else
- input_to_shortpath="$new_path"
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
- new_path="$input_to_shortpath"
-
- input_path="$input_to_shortpath"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $input_to_shortpath | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$NM"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
-
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in MSYS causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- fi
-
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of NM, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of NM, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of NM" "$LINENO" 5
- fi
- fi
-
- # Now new_path has a complete unix path to the binary
- if test "x`$ECHO $new_path | $GREP ^/bin/`" != x; then
- # Keep paths in /bin as-is, but remove trailing .exe if any
- new_path="${new_path/%.exe/}"
- # Do not save /bin paths to all_fixpath_prefixes!
- else
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $new_path`
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
- # Output is in $new_path
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
- fi
-
- else
- # We're on a unix platform. Hooray! :)
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$NM"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Cannot rely on the command "which" here since it doesn't always work.
- is_absolute_path=`$ECHO "$path" | $GREP ^/`
- if test -z "$is_absolute_path"; then
- # Path to executable is not absolute. Find it.
- IFS_save="$IFS"
- IFS=:
- for p in $PATH; do
- if test -f "$p/$path" && test -x "$p/$path"; then
- new_path="$p/$path"
- break
- fi
- done
- IFS="$IFS_save"
- else
- # This is an absolute path, we can use it without further modifications.
- new_path="$path"
- fi
-
- if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of NM, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of NM, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
-$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of NM" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
-
- if test "x$complete" != "x$new_complete"; then
- NM="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting NM to \"$new_complete\"" >&5
-$as_echo "$as_me: Rewriting NM to \"$new_complete\"" >&6;}
- fi
- fi
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${GNM+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in gnm
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_GNM+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $GNM in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_GNM="$GNM" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_GNM="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-GNM=$ac_cv_path_GNM
-if test -n "$GNM"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GNM" >&5
-$as_echo "$GNM" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$GNM" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !GNM! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!GNM!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xGNM" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of GNM from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of GNM from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in gnm
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_GNM+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $GNM in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_GNM="$GNM" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_GNM="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-GNM=$ac_cv_path_GNM
-if test -n "$GNM"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GNM" >&5
-$as_echo "$GNM" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$GNM" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$GNM" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool GNM= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool GNM= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNM" >&5
-$as_echo_n "checking for GNM... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$GNM"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool GNM=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool GNM=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_GNM+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $GNM in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_GNM="$GNM" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_GNM="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-GNM=$ac_cv_path_GNM
-if test -n "$GNM"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GNM" >&5
-$as_echo "$GNM" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$GNM" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool GNM=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool GNM=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNM" >&5
-$as_echo_n "checking for GNM... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool GNM=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
- # Only process if variable expands to non-empty
-
- if test "x$GNM" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$GNM"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path=`$CYGPATH -u "$path"`
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path=`$CYGPATH -u "$path"`
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of GNM, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of GNM, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of GNM" "$LINENO" 5
- fi
- fi
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file presence.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- # Short path failed, file does not exist as specified.
- # Try adding .exe or .cmd
- if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
- elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of GNM, which resolves as \"$new_path\", is invalid." >&5
-$as_echo "$as_me: The path of GNM, which resolves as \"$new_path\", is invalid." >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&5
-$as_echo "$as_me: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&6;}
- as_fn_error $? "Cannot locate the the path of GNM" "$LINENO" 5
- fi
- else
- input_to_shortpath="$new_path"
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
- new_path="$input_to_shortpath"
-
- input_path="$input_to_shortpath"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $input_to_shortpath | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$GNM"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
-
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in MSYS causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- fi
-
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of GNM, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of GNM, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of GNM" "$LINENO" 5
- fi
- fi
-
- # Now new_path has a complete unix path to the binary
- if test "x`$ECHO $new_path | $GREP ^/bin/`" != x; then
- # Keep paths in /bin as-is, but remove trailing .exe if any
- new_path="${new_path/%.exe/}"
- # Do not save /bin paths to all_fixpath_prefixes!
- else
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $new_path`
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
- # Output is in $new_path
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
- fi
-
- else
- # We're on a unix platform. Hooray! :)
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$GNM"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Cannot rely on the command "which" here since it doesn't always work.
- is_absolute_path=`$ECHO "$path" | $GREP ^/`
- if test -z "$is_absolute_path"; then
- # Path to executable is not absolute. Find it.
- IFS_save="$IFS"
- IFS=:
- for p in $PATH; do
- if test -f "$p/$path" && test -x "$p/$path"; then
- new_path="$p/$path"
- break
- fi
- done
- IFS="$IFS_save"
- else
- # This is an absolute path, we can use it without further modifications.
- new_path="$path"
- fi
-
- if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of GNM, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of GNM, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
-$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of GNM" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
-
- if test "x$complete" != "x$new_complete"; then
- GNM="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting GNM to \"$new_complete\"" >&5
-$as_echo "$as_me: Rewriting GNM to \"$new_complete\"" >&6;}
- fi
- fi
-
- elif test "x$OPENJDK_TARGET_OS" != xwindows; then
- # FIXME: we should unify this with the solaris case above.
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${STRIP+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- if test -n "$ac_tool_prefix"; then
- for ac_prog in strip
- do
- # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_STRIP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$STRIP"; then
- ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_STRIP="$ac_tool_prefix$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-STRIP=$ac_cv_prog_STRIP
-if test -n "$STRIP"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
-$as_echo "$STRIP" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$STRIP" && break
- done
-fi
-if test -z "$STRIP"; then
- ac_ct_STRIP=$STRIP
- for ac_prog in strip
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_STRIP"; then
- ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_STRIP="$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
-if test -n "$ac_ct_STRIP"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
-$as_echo "$ac_ct_STRIP" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$ac_ct_STRIP" && break
-done
-
- if test "x$ac_ct_STRIP" = x; then
- STRIP=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- STRIP=$ac_ct_STRIP
- fi
-fi
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !STRIP! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!STRIP!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xSTRIP" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of STRIP from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of STRIP from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- if test -n "$ac_tool_prefix"; then
- for ac_prog in strip
- do
- # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_STRIP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$STRIP"; then
- ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_STRIP="$ac_tool_prefix$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-STRIP=$ac_cv_prog_STRIP
-if test -n "$STRIP"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
-$as_echo "$STRIP" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$STRIP" && break
- done
-fi
-if test -z "$STRIP"; then
- ac_ct_STRIP=$STRIP
- for ac_prog in strip
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_STRIP"; then
- ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_STRIP="$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
-if test -n "$ac_ct_STRIP"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
-$as_echo "$ac_ct_STRIP" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$ac_ct_STRIP" && break
-done
-
- if test "x$ac_ct_STRIP" = x; then
- STRIP=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- STRIP=$ac_ct_STRIP
- fi
-fi
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$STRIP" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool STRIP= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool STRIP= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for STRIP" >&5
-$as_echo_n "checking for STRIP... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$STRIP"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool STRIP=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool STRIP=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_STRIP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $STRIP in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_STRIP="$STRIP" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_STRIP="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-STRIP=$ac_cv_path_STRIP
-if test -n "$STRIP"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
-$as_echo "$STRIP" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$STRIP" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool STRIP=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool STRIP=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for STRIP" >&5
-$as_echo_n "checking for STRIP... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool STRIP=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
- # Only process if variable expands to non-empty
-
- if test "x$STRIP" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$STRIP"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path=`$CYGPATH -u "$path"`
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path=`$CYGPATH -u "$path"`
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of STRIP, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of STRIP, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of STRIP" "$LINENO" 5
- fi
- fi
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file presence.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- # Short path failed, file does not exist as specified.
- # Try adding .exe or .cmd
- if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
- elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of STRIP, which resolves as \"$new_path\", is invalid." >&5
-$as_echo "$as_me: The path of STRIP, which resolves as \"$new_path\", is invalid." >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&5
-$as_echo "$as_me: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&6;}
- as_fn_error $? "Cannot locate the the path of STRIP" "$LINENO" 5
- fi
- else
- input_to_shortpath="$new_path"
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
- new_path="$input_to_shortpath"
-
- input_path="$input_to_shortpath"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $input_to_shortpath | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$STRIP"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
-
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in MSYS causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- fi
-
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of STRIP, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of STRIP, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of STRIP" "$LINENO" 5
- fi
- fi
-
- # Now new_path has a complete unix path to the binary
- if test "x`$ECHO $new_path | $GREP ^/bin/`" != x; then
- # Keep paths in /bin as-is, but remove trailing .exe if any
- new_path="${new_path/%.exe/}"
- # Do not save /bin paths to all_fixpath_prefixes!
- else
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $new_path`
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
- # Output is in $new_path
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
- fi
-
- else
- # We're on a unix platform. Hooray! :)
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$STRIP"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Cannot rely on the command "which" here since it doesn't always work.
- is_absolute_path=`$ECHO "$path" | $GREP ^/`
- if test -z "$is_absolute_path"; then
- # Path to executable is not absolute. Find it.
- IFS_save="$IFS"
- IFS=:
- for p in $PATH; do
- if test -f "$p/$path" && test -x "$p/$path"; then
- new_path="$p/$path"
- break
- fi
- done
- IFS="$IFS_save"
- else
- # This is an absolute path, we can use it without further modifications.
- new_path="$path"
- fi
-
- if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of STRIP, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of STRIP, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
-$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of STRIP" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
-
- if test "x$complete" != "x$new_complete"; then
- STRIP="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting STRIP to \"$new_complete\"" >&5
-$as_echo "$as_me: Rewriting STRIP to \"$new_complete\"" >&6;}
- fi
- fi
-
- if test "x$TOOLCHAIN_TYPE" = xgcc; then
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${NM+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- if test -n "$ac_tool_prefix"; then
- for ac_prog in nm gcc-nm
- do
- # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_NM+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$NM"; then
- ac_cv_prog_NM="$NM" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_NM="$ac_tool_prefix$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-NM=$ac_cv_prog_NM
-if test -n "$NM"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NM" >&5
-$as_echo "$NM" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$NM" && break
- done
-fi
-if test -z "$NM"; then
- ac_ct_NM=$NM
- for ac_prog in nm gcc-nm
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_NM+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_NM"; then
- ac_cv_prog_ac_ct_NM="$ac_ct_NM" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_NM="$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_NM=$ac_cv_prog_ac_ct_NM
-if test -n "$ac_ct_NM"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NM" >&5
-$as_echo "$ac_ct_NM" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$ac_ct_NM" && break
-done
-
- if test "x$ac_ct_NM" = x; then
- NM=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- NM=$ac_ct_NM
- fi
-fi
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !NM! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!NM!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xNM" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of NM from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of NM from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- if test -n "$ac_tool_prefix"; then
- for ac_prog in nm gcc-nm
- do
- # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_NM+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$NM"; then
- ac_cv_prog_NM="$NM" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_NM="$ac_tool_prefix$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-NM=$ac_cv_prog_NM
-if test -n "$NM"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NM" >&5
-$as_echo "$NM" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$NM" && break
- done
-fi
-if test -z "$NM"; then
- ac_ct_NM=$NM
- for ac_prog in nm gcc-nm
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_NM+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_NM"; then
- ac_cv_prog_ac_ct_NM="$ac_ct_NM" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_NM="$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_NM=$ac_cv_prog_ac_ct_NM
-if test -n "$ac_ct_NM"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NM" >&5
-$as_echo "$ac_ct_NM" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$ac_ct_NM" && break
-done
-
- if test "x$ac_ct_NM" = x; then
- NM=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- NM=$ac_ct_NM
- fi
-fi
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$NM" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool NM= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool NM= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for NM" >&5
-$as_echo_n "checking for NM... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$NM"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool NM=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool NM=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_NM+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $NM in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_NM="$NM" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_NM="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-NM=$ac_cv_path_NM
-if test -n "$NM"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NM" >&5
-$as_echo "$NM" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$NM" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool NM=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool NM=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for NM" >&5
-$as_echo_n "checking for NM... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool NM=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
- else
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${NM+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- if test -n "$ac_tool_prefix"; then
- for ac_prog in nm
- do
- # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_NM+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$NM"; then
- ac_cv_prog_NM="$NM" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_NM="$ac_tool_prefix$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-NM=$ac_cv_prog_NM
-if test -n "$NM"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NM" >&5
-$as_echo "$NM" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$NM" && break
- done
-fi
-if test -z "$NM"; then
- ac_ct_NM=$NM
- for ac_prog in nm
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_NM+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_NM"; then
- ac_cv_prog_ac_ct_NM="$ac_ct_NM" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_NM="$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_NM=$ac_cv_prog_ac_ct_NM
-if test -n "$ac_ct_NM"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NM" >&5
-$as_echo "$ac_ct_NM" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$ac_ct_NM" && break
-done
-
- if test "x$ac_ct_NM" = x; then
- NM=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- NM=$ac_ct_NM
- fi
-fi
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !NM! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!NM!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xNM" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of NM from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of NM from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- if test -n "$ac_tool_prefix"; then
- for ac_prog in nm
- do
- # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_NM+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$NM"; then
- ac_cv_prog_NM="$NM" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_NM="$ac_tool_prefix$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-NM=$ac_cv_prog_NM
-if test -n "$NM"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NM" >&5
-$as_echo "$NM" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$NM" && break
- done
-fi
-if test -z "$NM"; then
- ac_ct_NM=$NM
- for ac_prog in nm
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_NM+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_NM"; then
- ac_cv_prog_ac_ct_NM="$ac_ct_NM" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_NM="$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_NM=$ac_cv_prog_ac_ct_NM
-if test -n "$ac_ct_NM"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NM" >&5
-$as_echo "$ac_ct_NM" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$ac_ct_NM" && break
-done
-
- if test "x$ac_ct_NM" = x; then
- NM=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- NM=$ac_ct_NM
- fi
-fi
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$NM" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool NM= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool NM= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for NM" >&5
-$as_echo_n "checking for NM... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$NM"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool NM=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool NM=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_NM+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $NM in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_NM="$NM" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_NM="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-NM=$ac_cv_path_NM
-if test -n "$NM"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NM" >&5
-$as_echo "$NM" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$NM" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool NM=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool NM=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for NM" >&5
-$as_echo_n "checking for NM... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool NM=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
- fi
-
- # Only process if variable expands to non-empty
-
- if test "x$NM" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$NM"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path=`$CYGPATH -u "$path"`
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path=`$CYGPATH -u "$path"`
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of NM, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of NM, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of NM" "$LINENO" 5
- fi
- fi
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file presence.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- # Short path failed, file does not exist as specified.
- # Try adding .exe or .cmd
- if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
- elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of NM, which resolves as \"$new_path\", is invalid." >&5
-$as_echo "$as_me: The path of NM, which resolves as \"$new_path\", is invalid." >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&5
-$as_echo "$as_me: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&6;}
- as_fn_error $? "Cannot locate the the path of NM" "$LINENO" 5
- fi
- else
- input_to_shortpath="$new_path"
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
- new_path="$input_to_shortpath"
-
- input_path="$input_to_shortpath"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $input_to_shortpath | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$NM"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
-
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in MSYS causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- fi
-
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of NM, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of NM, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of NM" "$LINENO" 5
- fi
- fi
-
- # Now new_path has a complete unix path to the binary
- if test "x`$ECHO $new_path | $GREP ^/bin/`" != x; then
- # Keep paths in /bin as-is, but remove trailing .exe if any
- new_path="${new_path/%.exe/}"
- # Do not save /bin paths to all_fixpath_prefixes!
- else
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $new_path`
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
- # Output is in $new_path
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
- fi
-
- else
- # We're on a unix platform. Hooray! :)
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$NM"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Cannot rely on the command "which" here since it doesn't always work.
- is_absolute_path=`$ECHO "$path" | $GREP ^/`
- if test -z "$is_absolute_path"; then
- # Path to executable is not absolute. Find it.
- IFS_save="$IFS"
- IFS=:
- for p in $PATH; do
- if test -f "$p/$path" && test -x "$p/$path"; then
- new_path="$p/$path"
- break
- fi
- done
- IFS="$IFS_save"
- else
- # This is an absolute path, we can use it without further modifications.
- new_path="$path"
- fi
-
- if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of NM, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of NM, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
-$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of NM" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
-
- if test "x$complete" != "x$new_complete"; then
- NM="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting NM to \"$new_complete\"" >&5
-$as_echo "$as_me: Rewriting NM to \"$new_complete\"" >&6;}
- fi
- fi
-
- GNM="$NM"
-
- fi
-
- # objcopy is used for moving debug symbols to separate files when
- # full debug symbols are enabled.
- if test "x$OPENJDK_TARGET_OS" = xsolaris || test "x$OPENJDK_TARGET_OS" = xlinux; then
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${OBJCOPY+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- if test -n "$ac_tool_prefix"; then
- for ac_prog in gobjcopy objcopy
- do
- # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_OBJCOPY+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$OBJCOPY"; then
- ac_cv_prog_OBJCOPY="$OBJCOPY" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_OBJCOPY="$ac_tool_prefix$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-OBJCOPY=$ac_cv_prog_OBJCOPY
-if test -n "$OBJCOPY"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJCOPY" >&5
-$as_echo "$OBJCOPY" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$OBJCOPY" && break
- done
-fi
-if test -z "$OBJCOPY"; then
- ac_ct_OBJCOPY=$OBJCOPY
- for ac_prog in gobjcopy objcopy
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_OBJCOPY+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_OBJCOPY"; then
- ac_cv_prog_ac_ct_OBJCOPY="$ac_ct_OBJCOPY" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_OBJCOPY="$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_OBJCOPY=$ac_cv_prog_ac_ct_OBJCOPY
-if test -n "$ac_ct_OBJCOPY"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJCOPY" >&5
-$as_echo "$ac_ct_OBJCOPY" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$ac_ct_OBJCOPY" && break
-done
-
- if test "x$ac_ct_OBJCOPY" = x; then
- OBJCOPY=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- OBJCOPY=$ac_ct_OBJCOPY
- fi
-fi
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !OBJCOPY! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!OBJCOPY!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xOBJCOPY" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of OBJCOPY from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of OBJCOPY from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- if test -n "$ac_tool_prefix"; then
- for ac_prog in gobjcopy objcopy
- do
- # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_OBJCOPY+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$OBJCOPY"; then
- ac_cv_prog_OBJCOPY="$OBJCOPY" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_OBJCOPY="$ac_tool_prefix$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-OBJCOPY=$ac_cv_prog_OBJCOPY
-if test -n "$OBJCOPY"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJCOPY" >&5
-$as_echo "$OBJCOPY" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$OBJCOPY" && break
- done
-fi
-if test -z "$OBJCOPY"; then
- ac_ct_OBJCOPY=$OBJCOPY
- for ac_prog in gobjcopy objcopy
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_OBJCOPY+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_OBJCOPY"; then
- ac_cv_prog_ac_ct_OBJCOPY="$ac_ct_OBJCOPY" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_OBJCOPY="$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_OBJCOPY=$ac_cv_prog_ac_ct_OBJCOPY
-if test -n "$ac_ct_OBJCOPY"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJCOPY" >&5
-$as_echo "$ac_ct_OBJCOPY" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$ac_ct_OBJCOPY" && break
-done
-
- if test "x$ac_ct_OBJCOPY" = x; then
- OBJCOPY=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- OBJCOPY=$ac_ct_OBJCOPY
- fi
-fi
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$OBJCOPY" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool OBJCOPY= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool OBJCOPY= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for OBJCOPY" >&5
-$as_echo_n "checking for OBJCOPY... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$OBJCOPY"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool OBJCOPY=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool OBJCOPY=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_OBJCOPY+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $OBJCOPY in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_OBJCOPY="$OBJCOPY" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_OBJCOPY="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-OBJCOPY=$ac_cv_path_OBJCOPY
-if test -n "$OBJCOPY"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJCOPY" >&5
-$as_echo "$OBJCOPY" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$OBJCOPY" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool OBJCOPY=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool OBJCOPY=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for OBJCOPY" >&5
-$as_echo_n "checking for OBJCOPY... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool OBJCOPY=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
- # Only call fixup if objcopy was found.
- if test -n "$OBJCOPY"; then
-
- # Only process if variable expands to non-empty
-
- if test "x$OBJCOPY" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$OBJCOPY"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path=`$CYGPATH -u "$path"`
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path=`$CYGPATH -u "$path"`
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of OBJCOPY, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of OBJCOPY, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of OBJCOPY" "$LINENO" 5
- fi
- fi
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file presence.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- # Short path failed, file does not exist as specified.
- # Try adding .exe or .cmd
- if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
- elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of OBJCOPY, which resolves as \"$new_path\", is invalid." >&5
-$as_echo "$as_me: The path of OBJCOPY, which resolves as \"$new_path\", is invalid." >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&5
-$as_echo "$as_me: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&6;}
- as_fn_error $? "Cannot locate the the path of OBJCOPY" "$LINENO" 5
- fi
- else
- input_to_shortpath="$new_path"
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
- new_path="$input_to_shortpath"
-
- input_path="$input_to_shortpath"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $input_to_shortpath | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$OBJCOPY"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
-
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in MSYS causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- fi
-
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of OBJCOPY, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of OBJCOPY, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of OBJCOPY" "$LINENO" 5
- fi
- fi
-
- # Now new_path has a complete unix path to the binary
- if test "x`$ECHO $new_path | $GREP ^/bin/`" != x; then
- # Keep paths in /bin as-is, but remove trailing .exe if any
- new_path="${new_path/%.exe/}"
- # Do not save /bin paths to all_fixpath_prefixes!
- else
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $new_path`
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
- # Output is in $new_path
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
- fi
-
- else
- # We're on a unix platform. Hooray! :)
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$OBJCOPY"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Cannot rely on the command "which" here since it doesn't always work.
- is_absolute_path=`$ECHO "$path" | $GREP ^/`
- if test -z "$is_absolute_path"; then
- # Path to executable is not absolute. Find it.
- IFS_save="$IFS"
- IFS=:
- for p in $PATH; do
- if test -f "$p/$path" && test -x "$p/$path"; then
- new_path="$p/$path"
- break
- fi
- done
- IFS="$IFS_save"
- else
- # This is an absolute path, we can use it without further modifications.
- new_path="$path"
- fi
-
- if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of OBJCOPY, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of OBJCOPY, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
-$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of OBJCOPY" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
-
- if test "x$complete" != "x$new_complete"; then
- OBJCOPY="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting OBJCOPY to \"$new_complete\"" >&5
-$as_echo "$as_me: Rewriting OBJCOPY to \"$new_complete\"" >&6;}
- fi
- fi
-
- if test "x$OPENJDK_BUILD_OS" = xsolaris; then
- # objcopy prior to 2.21.1 on solaris is broken and is not usable.
- # Rewrite objcopy version output to VALID_VERSION or BAD_VERSION.
- # - version number is last blank separate word on first line
- # - version number formats that have been seen:
- # - .
- # - ..
- OBJCOPY_VERSION=`$OBJCOPY --version | $HEAD -n 1`
- # The outer [ ] is to prevent m4 from eating the [] in the sed expression.
- OBJCOPY_VERSION_CHECK=`$ECHO $OBJCOPY_VERSION | $SED -n \
- -e 's/.* //' \
- -e '/^[01]\./b bad' \
- -e '/^2\./{' \
- -e ' s/^2\.//' \
- -e ' /^[0-9]$/b bad' \
- -e ' /^[0-9]\./b bad' \
- -e ' /^1[0-9]$/b bad' \
- -e ' /^1[0-9]\./b bad' \
- -e ' /^20\./b bad' \
- -e ' /^21\.0$/b bad' \
- -e ' /^21\.0\./b bad' \
- -e '}' \
- -e ':good' \
- -e 's/.*/VALID_VERSION/p' \
- -e 'q' \
- -e ':bad' \
- -e 's/.*/BAD_VERSION/p' \
- -e 'q'`
- if test "x$OBJCOPY_VERSION_CHECK" = xBAD_VERSION; then
- OBJCOPY=
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring found objcopy since it is broken (prior to 2.21.1). No debug symbols will be generated." >&5
-$as_echo "$as_me: WARNING: Ignoring found objcopy since it is broken (prior to 2.21.1). No debug symbols will be generated." >&2;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: objcopy reports version $OBJCOPY_VERSION" >&5
-$as_echo "$as_me: objcopy reports version $OBJCOPY_VERSION" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: Note: patch 149063-01 or newer contains the correct Solaris 10 SPARC version" >&5
-$as_echo "$as_me: Note: patch 149063-01 or newer contains the correct Solaris 10 SPARC version" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: Note: patch 149064-01 or newer contains the correct Solaris 10 X86 version" >&5
-$as_echo "$as_me: Note: patch 149064-01 or newer contains the correct Solaris 10 X86 version" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: Note: Solaris 11 Update 1 contains the correct version" >&5
-$as_echo "$as_me: Note: Solaris 11 Update 1 contains the correct version" >&6;}
- fi
- fi
- fi
- fi
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${OBJDUMP+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- if test -n "$ac_tool_prefix"; then
- for ac_prog in gobjdump objdump
- do
- # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_OBJDUMP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$OBJDUMP"; then
- ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_OBJDUMP="$ac_tool_prefix$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-OBJDUMP=$ac_cv_prog_OBJDUMP
-if test -n "$OBJDUMP"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5
-$as_echo "$OBJDUMP" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$OBJDUMP" && break
- done
-fi
-if test -z "$OBJDUMP"; then
- ac_ct_OBJDUMP=$OBJDUMP
- for ac_prog in gobjdump objdump
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_OBJDUMP"; then
- ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_OBJDUMP="$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
-if test -n "$ac_ct_OBJDUMP"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5
-$as_echo "$ac_ct_OBJDUMP" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$ac_ct_OBJDUMP" && break
-done
-
- if test "x$ac_ct_OBJDUMP" = x; then
- OBJDUMP=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- OBJDUMP=$ac_ct_OBJDUMP
- fi
-fi
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !OBJDUMP! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!OBJDUMP!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xOBJDUMP" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of OBJDUMP from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of OBJDUMP from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- if test -n "$ac_tool_prefix"; then
- for ac_prog in gobjdump objdump
- do
- # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_OBJDUMP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$OBJDUMP"; then
- ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_OBJDUMP="$ac_tool_prefix$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-OBJDUMP=$ac_cv_prog_OBJDUMP
-if test -n "$OBJDUMP"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5
-$as_echo "$OBJDUMP" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$OBJDUMP" && break
- done
-fi
-if test -z "$OBJDUMP"; then
- ac_ct_OBJDUMP=$OBJDUMP
- for ac_prog in gobjdump objdump
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_OBJDUMP"; then
- ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_OBJDUMP="$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
-if test -n "$ac_ct_OBJDUMP"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5
-$as_echo "$ac_ct_OBJDUMP" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$ac_ct_OBJDUMP" && break
-done
-
- if test "x$ac_ct_OBJDUMP" = x; then
- OBJDUMP=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- OBJDUMP=$ac_ct_OBJDUMP
- fi
-fi
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$OBJDUMP" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool OBJDUMP= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool OBJDUMP= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for OBJDUMP" >&5
-$as_echo_n "checking for OBJDUMP... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$OBJDUMP"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool OBJDUMP=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool OBJDUMP=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_OBJDUMP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $OBJDUMP in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_OBJDUMP="$OBJDUMP" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_OBJDUMP="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-OBJDUMP=$ac_cv_path_OBJDUMP
-if test -n "$OBJDUMP"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5
-$as_echo "$OBJDUMP" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$OBJDUMP" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool OBJDUMP=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool OBJDUMP=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for OBJDUMP" >&5
-$as_echo_n "checking for OBJDUMP... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool OBJDUMP=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
- if test "x$OBJDUMP" != x; then
- # Only used for compare.sh; we can live without it. BASIC_FIXUP_EXECUTABLE
- # bails if argument is missing.
-
- # Only process if variable expands to non-empty
-
- if test "x$OBJDUMP" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$OBJDUMP"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path=`$CYGPATH -u "$path"`
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path=`$CYGPATH -u "$path"`
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of OBJDUMP, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of OBJDUMP, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of OBJDUMP" "$LINENO" 5
- fi
- fi
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file presence.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- # Short path failed, file does not exist as specified.
- # Try adding .exe or .cmd
- if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
- elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of OBJDUMP, which resolves as \"$new_path\", is invalid." >&5
-$as_echo "$as_me: The path of OBJDUMP, which resolves as \"$new_path\", is invalid." >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&5
-$as_echo "$as_me: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&6;}
- as_fn_error $? "Cannot locate the the path of OBJDUMP" "$LINENO" 5
- fi
- else
- input_to_shortpath="$new_path"
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
- new_path="$input_to_shortpath"
-
- input_path="$input_to_shortpath"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $input_to_shortpath | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$OBJDUMP"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
-
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in MSYS causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- fi
-
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of OBJDUMP, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of OBJDUMP, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of OBJDUMP" "$LINENO" 5
- fi
- fi
-
- # Now new_path has a complete unix path to the binary
- if test "x`$ECHO $new_path | $GREP ^/bin/`" != x; then
- # Keep paths in /bin as-is, but remove trailing .exe if any
- new_path="${new_path/%.exe/}"
- # Do not save /bin paths to all_fixpath_prefixes!
- else
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $new_path`
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
- # Output is in $new_path
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
- fi
-
- else
- # We're on a unix platform. Hooray! :)
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$OBJDUMP"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Cannot rely on the command "which" here since it doesn't always work.
- is_absolute_path=`$ECHO "$path" | $GREP ^/`
- if test -z "$is_absolute_path"; then
- # Path to executable is not absolute. Find it.
- IFS_save="$IFS"
- IFS=:
- for p in $PATH; do
- if test -f "$p/$path" && test -x "$p/$path"; then
- new_path="$p/$path"
- break
- fi
- done
- IFS="$IFS_save"
- else
- # This is an absolute path, we can use it without further modifications.
- new_path="$path"
- fi
-
- if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of OBJDUMP, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of OBJDUMP, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
-$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of OBJDUMP" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
-
- if test "x$complete" != "x$new_complete"; then
- OBJDUMP="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting OBJDUMP to \"$new_complete\"" >&5
-$as_echo "$as_me: Rewriting OBJDUMP to \"$new_complete\"" >&6;}
- fi
- fi
-
- fi
-
-
- # Restore old path, except for the microsoft toolchain, which requires VS_PATH
- # to remain in place. Otherwise the compiler will not work in some siutations
- # in later configure checks.
- if test "x$TOOLCHAIN_TYPE" != "xmicrosoft"; then
- PATH="$OLD_PATH"
- fi
-
- # Restore the flags to the user specified values.
- # This is necessary since AC_PROG_CC defaults CFLAGS to "-g -O2"
- CFLAGS="$ORG_CFLAGS"
- CXXFLAGS="$ORG_CXXFLAGS"
-
-
-# Finally do some processing after the detection phase
-
- if test "x$COMPILE_TYPE" = "xcross"; then
- # Now we need to find a C/C++ compiler that can build executables for the
- # build platform. We can't use the AC_PROG_CC macro, since it can only be
- # used once. Also, we need to do this without adding a tools dir to the
- # path, otherwise we might pick up cross-compilers which don't use standard
- # naming.
-
- OLDPATH="$PATH"
-
-
-# Check whether --with-build-devkit was given.
-if test "${with_build_devkit+set}" = set; then :
- withval=$with_build_devkit;
-fi
-
- if test "x$with_build_devkit" = "xyes"; then
- as_fn_error $? "--with-build-devkit must have a value" "$LINENO" 5
- elif test -n "$with_build_devkit"; then
- if test ! -d "$with_build_devkit"; then
- as_fn_error $? "--with-build-devkit points to non existing dir: $with_build_devkit" "$LINENO" 5
- else
-
- # Only process if variable expands to non-empty
-
- if test "x$with_build_devkit" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- path="$with_build_devkit"
- new_path=`$CYGPATH -u "$path"`
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file precense.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of with_build_devkit, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of with_build_devkit, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Cannot locate the the path of with_build_devkit" "$LINENO" 5
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
-
- if test "x$path" != "x$new_path"; then
- with_build_devkit="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting with_build_devkit to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting with_build_devkit to \"$new_path\"" >&6;}
- fi
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- path="$with_build_devkit"
- has_colon=`$ECHO $path | $GREP ^.:`
- new_path="$path"
- if test "x$has_colon" = x; then
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $path`
- fi
-
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- if test "x$path" != "x$new_path"; then
- with_build_devkit="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting with_build_devkit to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting with_build_devkit to \"$new_path\"" >&6;}
- fi
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
-
- else
- # We're on a unix platform. Hooray! :)
- path="$with_build_devkit"
- has_space=`$ECHO "$path" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of with_build_devkit, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of with_build_devkit, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
- fi
-
- # Use eval to expand a potential ~
- eval path="$path"
- if test ! -f "$path" && test ! -d "$path"; then
- as_fn_error $? "The path of with_build_devkit, which resolves as \"$path\", is not found." "$LINENO" 5
- fi
-
- if test -d "$path"; then
- with_build_devkit="`cd "$path"; $THEPWDCMD -L`"
- else
- dir="`$DIRNAME "$path"`"
- base="`$BASENAME "$path"`"
- with_build_devkit="`cd "$dir"; $THEPWDCMD -L`/$base"
- fi
- fi
- fi
-
- BUILD_DEVKIT_ROOT="$with_build_devkit"
- # Check for a meta data info file in the root of the devkit
- if test -f "$BUILD_DEVKIT_ROOT/devkit.info"; then
- # Process devkit.info so that existing devkit variables are not
- # modified by this
- $SED -e "s/^DEVKIT_/BUILD_DEVKIT_/g" \
- -e "s/\$DEVKIT_ROOT/\$BUILD_DEVKIT_ROOT/g" \
- -e "s/\$host/\$build/g" \
- $BUILD_DEVKIT_ROOT/devkit.info \
- > $CONFIGURESUPPORT_OUTPUTDIR/build-devkit.info
- . $CONFIGURESUPPORT_OUTPUTDIR/build-devkit.info
- # This potentially sets the following:
- # A descriptive name of the devkit
-
- if test "x$BUILD_DEVKIT_NAME" = x; then
- eval BUILD_DEVKIT_NAME="\${BUILD_DEVKIT_NAME_${OPENJDK_TARGET_CPU}}"
- fi
-
- # Corresponds to --with-extra-path
-
- if test "x$BUILD_DEVKIT_EXTRA_PATH" = x; then
- eval BUILD_DEVKIT_EXTRA_PATH="\${BUILD_DEVKIT_EXTRA_PATH_${OPENJDK_TARGET_CPU}}"
- fi
-
- # Corresponds to --with-toolchain-path
-
- if test "x$BUILD_DEVKIT_TOOLCHAIN_PATH" = x; then
- eval BUILD_DEVKIT_TOOLCHAIN_PATH="\${BUILD_DEVKIT_TOOLCHAIN_PATH_${OPENJDK_TARGET_CPU}}"
- fi
-
- # Corresponds to --with-sysroot
-
- if test "x$BUILD_DEVKIT_SYSROOT" = x; then
- eval BUILD_DEVKIT_SYSROOT="\${BUILD_DEVKIT_SYSROOT_${OPENJDK_TARGET_CPU}}"
- fi
-
- # Skip the Window specific parts
- fi
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for build platform devkit" >&5
-$as_echo_n "checking for build platform devkit... " >&6; }
- if test "x$BUILD_DEVKIT_NAME" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BUILD_DEVKIT_NAME in $BUILD_DEVKIT_ROOT" >&5
-$as_echo "$BUILD_DEVKIT_NAME in $BUILD_DEVKIT_ROOT" >&6; }
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BUILD_DEVKIT_ROOT" >&5
-$as_echo "$BUILD_DEVKIT_ROOT" >&6; }
- fi
-
- BUILD_SYSROOT="$BUILD_DEVKIT_SYSROOT"
-
- if test "x$BUILD_SYSROOT" != "x"; then
- if test "x$TOOLCHAIN_TYPE" = xsolstudio; then
- if test "x$OPENJDK_TARGET_OS" = xsolaris; then
- # Solaris Studio does not have a concept of sysroot. Instead we must
- # make sure the default include and lib dirs are appended to each
- # compile and link command line. Must also add -I-xbuiltin to enable
- # inlining of system functions and intrinsics.
- BUILD_SYSROOT_CFLAGS="-I-xbuiltin -I$BUILD_SYSROOT/usr/include"
- BUILD_SYSROOT_LDFLAGS="-L$BUILD_SYSROOT/usr/lib$OPENJDK_TARGET_CPU_ISADIR \
- -L$BUILD_SYSROOT/lib$OPENJDK_TARGET_CPU_ISADIR"
- fi
- elif test "x$TOOLCHAIN_TYPE" = xgcc; then
- BUILD_SYSROOT_CFLAGS="--sysroot=$BUILD_SYSROOT"
- BUILD_SYSROOT_LDFLAGS="--sysroot=$BUILD_SYSROOT"
- elif test "x$TOOLCHAIN_TYPE" = xclang; then
- BUILD_SYSROOT_CFLAGS="-isysroot $BUILD_SYSROOT"
- BUILD_SYSROOT_LDFLAGS="-isysroot $BUILD_SYSROOT"
- fi
- # The global CFLAGS and LDFLAGS variables need these for configure to function
- BUILD_CFLAGS="$BUILD_CFLAGS $BUILD_SYSROOT_CFLAGS"
- BUILD_CPPFLAGS="$BUILD_CPPFLAGS $BUILD_SYSROOT_CFLAGS"
- BUILD_CXXFLAGS="$BUILD_CXXFLAGS $BUILD_SYSROOT_CFLAGS"
- BUILD_LDFLAGS="$BUILD_LDFLAGS $BUILD_SYSROOT_LDFLAGS"
- fi
-
- if test "x$OPENJDK_TARGET_OS" = xmacosx; then
- # We also need -iframework/System/Library/Frameworks
- BUILD_SYSROOT_CFLAGS="$BUILD_SYSROOT_CFLAGS -iframework $BUILD_SYSROOT/System/Library/Frameworks"
- BUILD_SYSROOT_LDFLAGS="$BUILD_SYSROOT_LDFLAGS -iframework $BUILD_SYSROOT/System/Library/Frameworks"
- # These always need to be set, or we can't find the frameworks embedded in JavaVM.framework
- # set this here so it doesn't have to be peppered throughout the forest
- BUILD_SYSROOT_CFLAGS="$BUILD_SYSROOT_CFLAGS -F $BUILD_SYSROOT/System/Library/Frameworks/JavaVM.framework/Frameworks"
- BUILD_SYSROOT_LDFLAGS="$BUILD_SYSROOT_LDFLAGS -F $BUILD_SYSROOT/System/Library/Frameworks/JavaVM.framework/Frameworks"
- fi
-
-
-
-
-
- # Fallback default of just /bin if DEVKIT_PATH is not defined
- if test "x$BUILD_DEVKIT_TOOLCHAIN_PATH" = x; then
- BUILD_DEVKIT_TOOLCHAIN_PATH="$BUILD_DEVKIT_ROOT/bin"
- fi
- PATH="$BUILD_DEVKIT_TOOLCHAIN_PATH:$BUILD_DEVKIT_EXTRA_PATH"
- fi
- fi
-
- # FIXME: we should list the discovered compilers as an exclude pattern!
- # If we do that, we can do this detection before POST_DETECTION, and still
- # find the build compilers in the tools dir, if needed.
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${BUILD_CC+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in cl cc gcc
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_BUILD_CC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $BUILD_CC in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_BUILD_CC="$BUILD_CC" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_BUILD_CC="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-BUILD_CC=$ac_cv_path_BUILD_CC
-if test -n "$BUILD_CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BUILD_CC" >&5
-$as_echo "$BUILD_CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$BUILD_CC" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !BUILD_CC! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!BUILD_CC!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xBUILD_CC" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of BUILD_CC from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of BUILD_CC from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in cl cc gcc
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_BUILD_CC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $BUILD_CC in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_BUILD_CC="$BUILD_CC" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_BUILD_CC="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-BUILD_CC=$ac_cv_path_BUILD_CC
-if test -n "$BUILD_CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BUILD_CC" >&5
-$as_echo "$BUILD_CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$BUILD_CC" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$BUILD_CC" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool BUILD_CC= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool BUILD_CC= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for BUILD_CC" >&5
-$as_echo_n "checking for BUILD_CC... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$BUILD_CC"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool BUILD_CC=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool BUILD_CC=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_BUILD_CC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $BUILD_CC in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_BUILD_CC="$BUILD_CC" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_BUILD_CC="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-BUILD_CC=$ac_cv_path_BUILD_CC
-if test -n "$BUILD_CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BUILD_CC" >&5
-$as_echo "$BUILD_CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$BUILD_CC" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool BUILD_CC=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool BUILD_CC=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for BUILD_CC" >&5
-$as_echo_n "checking for BUILD_CC... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool BUILD_CC=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
- if test "x$BUILD_CC" = x; then
- as_fn_error $? "Could not find required tool for BUILD_CC" "$LINENO" 5
- fi
-
-
-
- # Only process if variable expands to non-empty
-
- if test "x$BUILD_CC" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$BUILD_CC"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path=`$CYGPATH -u "$path"`
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path=`$CYGPATH -u "$path"`
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of BUILD_CC, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of BUILD_CC, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of BUILD_CC" "$LINENO" 5
- fi
- fi
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file presence.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- # Short path failed, file does not exist as specified.
- # Try adding .exe or .cmd
- if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
- elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of BUILD_CC, which resolves as \"$new_path\", is invalid." >&5
-$as_echo "$as_me: The path of BUILD_CC, which resolves as \"$new_path\", is invalid." >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&5
-$as_echo "$as_me: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&6;}
- as_fn_error $? "Cannot locate the the path of BUILD_CC" "$LINENO" 5
- fi
- else
- input_to_shortpath="$new_path"
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
- new_path="$input_to_shortpath"
-
- input_path="$input_to_shortpath"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $input_to_shortpath | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$BUILD_CC"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
-
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in MSYS causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- fi
-
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of BUILD_CC, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of BUILD_CC, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of BUILD_CC" "$LINENO" 5
- fi
- fi
-
- # Now new_path has a complete unix path to the binary
- if test "x`$ECHO $new_path | $GREP ^/bin/`" != x; then
- # Keep paths in /bin as-is, but remove trailing .exe if any
- new_path="${new_path/%.exe/}"
- # Do not save /bin paths to all_fixpath_prefixes!
- else
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $new_path`
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
- # Output is in $new_path
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
- fi
-
- else
- # We're on a unix platform. Hooray! :)
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$BUILD_CC"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Cannot rely on the command "which" here since it doesn't always work.
- is_absolute_path=`$ECHO "$path" | $GREP ^/`
- if test -z "$is_absolute_path"; then
- # Path to executable is not absolute. Find it.
- IFS_save="$IFS"
- IFS=:
- for p in $PATH; do
- if test -f "$p/$path" && test -x "$p/$path"; then
- new_path="$p/$path"
- break
- fi
- done
- IFS="$IFS_save"
- else
- # This is an absolute path, we can use it without further modifications.
- new_path="$path"
- fi
-
- if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of BUILD_CC, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of BUILD_CC, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
-$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of BUILD_CC" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
-
- if test "x$complete" != "x$new_complete"; then
- BUILD_CC="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting BUILD_CC to \"$new_complete\"" >&5
-$as_echo "$as_me: Rewriting BUILD_CC to \"$new_complete\"" >&6;}
- fi
- fi
-
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${BUILD_CXX+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in cl CC g++
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_BUILD_CXX+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $BUILD_CXX in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_BUILD_CXX="$BUILD_CXX" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_BUILD_CXX="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-BUILD_CXX=$ac_cv_path_BUILD_CXX
-if test -n "$BUILD_CXX"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BUILD_CXX" >&5
-$as_echo "$BUILD_CXX" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$BUILD_CXX" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !BUILD_CXX! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!BUILD_CXX!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xBUILD_CXX" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of BUILD_CXX from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of BUILD_CXX from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in cl CC g++
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_BUILD_CXX+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $BUILD_CXX in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_BUILD_CXX="$BUILD_CXX" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_BUILD_CXX="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-BUILD_CXX=$ac_cv_path_BUILD_CXX
-if test -n "$BUILD_CXX"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BUILD_CXX" >&5
-$as_echo "$BUILD_CXX" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$BUILD_CXX" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$BUILD_CXX" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool BUILD_CXX= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool BUILD_CXX= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for BUILD_CXX" >&5
-$as_echo_n "checking for BUILD_CXX... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$BUILD_CXX"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool BUILD_CXX=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool BUILD_CXX=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_BUILD_CXX+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $BUILD_CXX in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_BUILD_CXX="$BUILD_CXX" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_BUILD_CXX="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-BUILD_CXX=$ac_cv_path_BUILD_CXX
-if test -n "$BUILD_CXX"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BUILD_CXX" >&5
-$as_echo "$BUILD_CXX" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$BUILD_CXX" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool BUILD_CXX=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool BUILD_CXX=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for BUILD_CXX" >&5
-$as_echo_n "checking for BUILD_CXX... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool BUILD_CXX=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
- if test "x$BUILD_CXX" = x; then
- as_fn_error $? "Could not find required tool for BUILD_CXX" "$LINENO" 5
- fi
-
-
-
- # Only process if variable expands to non-empty
-
- if test "x$BUILD_CXX" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$BUILD_CXX"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path=`$CYGPATH -u "$path"`
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path=`$CYGPATH -u "$path"`
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of BUILD_CXX, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of BUILD_CXX, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of BUILD_CXX" "$LINENO" 5
- fi
- fi
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file presence.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- # Short path failed, file does not exist as specified.
- # Try adding .exe or .cmd
- if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
- elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of BUILD_CXX, which resolves as \"$new_path\", is invalid." >&5
-$as_echo "$as_me: The path of BUILD_CXX, which resolves as \"$new_path\", is invalid." >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&5
-$as_echo "$as_me: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&6;}
- as_fn_error $? "Cannot locate the the path of BUILD_CXX" "$LINENO" 5
- fi
- else
- input_to_shortpath="$new_path"
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
- new_path="$input_to_shortpath"
-
- input_path="$input_to_shortpath"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $input_to_shortpath | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$BUILD_CXX"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
-
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in MSYS causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- fi
-
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of BUILD_CXX, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of BUILD_CXX, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of BUILD_CXX" "$LINENO" 5
- fi
- fi
-
- # Now new_path has a complete unix path to the binary
- if test "x`$ECHO $new_path | $GREP ^/bin/`" != x; then
- # Keep paths in /bin as-is, but remove trailing .exe if any
- new_path="${new_path/%.exe/}"
- # Do not save /bin paths to all_fixpath_prefixes!
- else
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $new_path`
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
- # Output is in $new_path
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
- fi
-
- else
- # We're on a unix platform. Hooray! :)
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$BUILD_CXX"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Cannot rely on the command "which" here since it doesn't always work.
- is_absolute_path=`$ECHO "$path" | $GREP ^/`
- if test -z "$is_absolute_path"; then
- # Path to executable is not absolute. Find it.
- IFS_save="$IFS"
- IFS=:
- for p in $PATH; do
- if test -f "$p/$path" && test -x "$p/$path"; then
- new_path="$p/$path"
- break
- fi
- done
- IFS="$IFS_save"
- else
- # This is an absolute path, we can use it without further modifications.
- new_path="$path"
- fi
-
- if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of BUILD_CXX, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of BUILD_CXX, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
-$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of BUILD_CXX" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
-
- if test "x$complete" != "x$new_complete"; then
- BUILD_CXX="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting BUILD_CXX to \"$new_complete\"" >&5
-$as_echo "$as_me: Rewriting BUILD_CXX to \"$new_complete\"" >&6;}
- fi
- fi
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${BUILD_NM+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in nm gcc-nm
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_BUILD_NM+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $BUILD_NM in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_BUILD_NM="$BUILD_NM" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_BUILD_NM="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-BUILD_NM=$ac_cv_path_BUILD_NM
-if test -n "$BUILD_NM"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BUILD_NM" >&5
-$as_echo "$BUILD_NM" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$BUILD_NM" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !BUILD_NM! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!BUILD_NM!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xBUILD_NM" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of BUILD_NM from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of BUILD_NM from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in nm gcc-nm
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_BUILD_NM+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $BUILD_NM in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_BUILD_NM="$BUILD_NM" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_BUILD_NM="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-BUILD_NM=$ac_cv_path_BUILD_NM
-if test -n "$BUILD_NM"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BUILD_NM" >&5
-$as_echo "$BUILD_NM" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$BUILD_NM" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$BUILD_NM" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool BUILD_NM= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool BUILD_NM= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for BUILD_NM" >&5
-$as_echo_n "checking for BUILD_NM... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$BUILD_NM"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool BUILD_NM=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool BUILD_NM=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_BUILD_NM+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $BUILD_NM in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_BUILD_NM="$BUILD_NM" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_BUILD_NM="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-BUILD_NM=$ac_cv_path_BUILD_NM
-if test -n "$BUILD_NM"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BUILD_NM" >&5
-$as_echo "$BUILD_NM" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$BUILD_NM" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool BUILD_NM=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool BUILD_NM=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for BUILD_NM" >&5
-$as_echo_n "checking for BUILD_NM... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool BUILD_NM=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
- # Only process if variable expands to non-empty
-
- if test "x$BUILD_NM" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$BUILD_NM"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path=`$CYGPATH -u "$path"`
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path=`$CYGPATH -u "$path"`
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of BUILD_NM, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of BUILD_NM, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of BUILD_NM" "$LINENO" 5
- fi
- fi
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file presence.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- # Short path failed, file does not exist as specified.
- # Try adding .exe or .cmd
- if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
- elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of BUILD_NM, which resolves as \"$new_path\", is invalid." >&5
-$as_echo "$as_me: The path of BUILD_NM, which resolves as \"$new_path\", is invalid." >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&5
-$as_echo "$as_me: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&6;}
- as_fn_error $? "Cannot locate the the path of BUILD_NM" "$LINENO" 5
- fi
- else
- input_to_shortpath="$new_path"
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
- new_path="$input_to_shortpath"
-
- input_path="$input_to_shortpath"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $input_to_shortpath | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$BUILD_NM"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
-
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in MSYS causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- fi
-
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of BUILD_NM, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of BUILD_NM, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of BUILD_NM" "$LINENO" 5
- fi
- fi
-
- # Now new_path has a complete unix path to the binary
- if test "x`$ECHO $new_path | $GREP ^/bin/`" != x; then
- # Keep paths in /bin as-is, but remove trailing .exe if any
- new_path="${new_path/%.exe/}"
- # Do not save /bin paths to all_fixpath_prefixes!
- else
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $new_path`
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
- # Output is in $new_path
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
- fi
-
- else
- # We're on a unix platform. Hooray! :)
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$BUILD_NM"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Cannot rely on the command "which" here since it doesn't always work.
- is_absolute_path=`$ECHO "$path" | $GREP ^/`
- if test -z "$is_absolute_path"; then
- # Path to executable is not absolute. Find it.
- IFS_save="$IFS"
- IFS=:
- for p in $PATH; do
- if test -f "$p/$path" && test -x "$p/$path"; then
- new_path="$p/$path"
- break
- fi
- done
- IFS="$IFS_save"
- else
- # This is an absolute path, we can use it without further modifications.
- new_path="$path"
- fi
-
- if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of BUILD_NM, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of BUILD_NM, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
-$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of BUILD_NM" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
-
- if test "x$complete" != "x$new_complete"; then
- BUILD_NM="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting BUILD_NM to \"$new_complete\"" >&5
-$as_echo "$as_me: Rewriting BUILD_NM to \"$new_complete\"" >&6;}
- fi
- fi
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${BUILD_AR+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in ar gcc-ar
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_BUILD_AR+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $BUILD_AR in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_BUILD_AR="$BUILD_AR" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_BUILD_AR="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-BUILD_AR=$ac_cv_path_BUILD_AR
-if test -n "$BUILD_AR"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BUILD_AR" >&5
-$as_echo "$BUILD_AR" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$BUILD_AR" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !BUILD_AR! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!BUILD_AR!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xBUILD_AR" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of BUILD_AR from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of BUILD_AR from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in ar gcc-ar
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_BUILD_AR+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $BUILD_AR in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_BUILD_AR="$BUILD_AR" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_BUILD_AR="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-BUILD_AR=$ac_cv_path_BUILD_AR
-if test -n "$BUILD_AR"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BUILD_AR" >&5
-$as_echo "$BUILD_AR" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$BUILD_AR" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$BUILD_AR" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool BUILD_AR= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool BUILD_AR= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for BUILD_AR" >&5
-$as_echo_n "checking for BUILD_AR... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$BUILD_AR"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool BUILD_AR=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool BUILD_AR=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_BUILD_AR+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $BUILD_AR in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_BUILD_AR="$BUILD_AR" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_BUILD_AR="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-BUILD_AR=$ac_cv_path_BUILD_AR
-if test -n "$BUILD_AR"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BUILD_AR" >&5
-$as_echo "$BUILD_AR" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$BUILD_AR" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool BUILD_AR=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool BUILD_AR=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for BUILD_AR" >&5
-$as_echo_n "checking for BUILD_AR... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool BUILD_AR=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
- # Only process if variable expands to non-empty
-
- if test "x$BUILD_AR" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$BUILD_AR"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path=`$CYGPATH -u "$path"`
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path=`$CYGPATH -u "$path"`
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of BUILD_AR, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of BUILD_AR, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of BUILD_AR" "$LINENO" 5
- fi
- fi
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file presence.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- # Short path failed, file does not exist as specified.
- # Try adding .exe or .cmd
- if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
- elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of BUILD_AR, which resolves as \"$new_path\", is invalid." >&5
-$as_echo "$as_me: The path of BUILD_AR, which resolves as \"$new_path\", is invalid." >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&5
-$as_echo "$as_me: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&6;}
- as_fn_error $? "Cannot locate the the path of BUILD_AR" "$LINENO" 5
- fi
- else
- input_to_shortpath="$new_path"
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
- new_path="$input_to_shortpath"
-
- input_path="$input_to_shortpath"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $input_to_shortpath | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$BUILD_AR"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
-
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in MSYS causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- fi
-
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of BUILD_AR, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of BUILD_AR, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of BUILD_AR" "$LINENO" 5
- fi
- fi
-
- # Now new_path has a complete unix path to the binary
- if test "x`$ECHO $new_path | $GREP ^/bin/`" != x; then
- # Keep paths in /bin as-is, but remove trailing .exe if any
- new_path="${new_path/%.exe/}"
- # Do not save /bin paths to all_fixpath_prefixes!
- else
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $new_path`
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
- # Output is in $new_path
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
- fi
-
- else
- # We're on a unix platform. Hooray! :)
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$BUILD_AR"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Cannot rely on the command "which" here since it doesn't always work.
- is_absolute_path=`$ECHO "$path" | $GREP ^/`
- if test -z "$is_absolute_path"; then
- # Path to executable is not absolute. Find it.
- IFS_save="$IFS"
- IFS=:
- for p in $PATH; do
- if test -f "$p/$path" && test -x "$p/$path"; then
- new_path="$p/$path"
- break
- fi
- done
- IFS="$IFS_save"
- else
- # This is an absolute path, we can use it without further modifications.
- new_path="$path"
- fi
-
- if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of BUILD_AR, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of BUILD_AR, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
-$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of BUILD_AR" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
-
- if test "x$complete" != "x$new_complete"; then
- BUILD_AR="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting BUILD_AR to \"$new_complete\"" >&5
-$as_echo "$as_me: Rewriting BUILD_AR to \"$new_complete\"" >&6;}
- fi
- fi
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${BUILD_OBJCOPY+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in objcopy
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_BUILD_OBJCOPY+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $BUILD_OBJCOPY in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_BUILD_OBJCOPY="$BUILD_OBJCOPY" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_BUILD_OBJCOPY="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-BUILD_OBJCOPY=$ac_cv_path_BUILD_OBJCOPY
-if test -n "$BUILD_OBJCOPY"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BUILD_OBJCOPY" >&5
-$as_echo "$BUILD_OBJCOPY" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$BUILD_OBJCOPY" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !BUILD_OBJCOPY! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!BUILD_OBJCOPY!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xBUILD_OBJCOPY" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of BUILD_OBJCOPY from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of BUILD_OBJCOPY from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in objcopy
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_BUILD_OBJCOPY+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $BUILD_OBJCOPY in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_BUILD_OBJCOPY="$BUILD_OBJCOPY" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_BUILD_OBJCOPY="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-BUILD_OBJCOPY=$ac_cv_path_BUILD_OBJCOPY
-if test -n "$BUILD_OBJCOPY"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BUILD_OBJCOPY" >&5
-$as_echo "$BUILD_OBJCOPY" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$BUILD_OBJCOPY" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$BUILD_OBJCOPY" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool BUILD_OBJCOPY= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool BUILD_OBJCOPY= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for BUILD_OBJCOPY" >&5
-$as_echo_n "checking for BUILD_OBJCOPY... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$BUILD_OBJCOPY"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool BUILD_OBJCOPY=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool BUILD_OBJCOPY=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_BUILD_OBJCOPY+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $BUILD_OBJCOPY in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_BUILD_OBJCOPY="$BUILD_OBJCOPY" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_BUILD_OBJCOPY="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-BUILD_OBJCOPY=$ac_cv_path_BUILD_OBJCOPY
-if test -n "$BUILD_OBJCOPY"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BUILD_OBJCOPY" >&5
-$as_echo "$BUILD_OBJCOPY" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$BUILD_OBJCOPY" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool BUILD_OBJCOPY=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool BUILD_OBJCOPY=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for BUILD_OBJCOPY" >&5
-$as_echo_n "checking for BUILD_OBJCOPY... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool BUILD_OBJCOPY=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
- # Only process if variable expands to non-empty
-
- if test "x$BUILD_OBJCOPY" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$BUILD_OBJCOPY"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path=`$CYGPATH -u "$path"`
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path=`$CYGPATH -u "$path"`
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of BUILD_OBJCOPY, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of BUILD_OBJCOPY, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of BUILD_OBJCOPY" "$LINENO" 5
- fi
- fi
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file presence.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- # Short path failed, file does not exist as specified.
- # Try adding .exe or .cmd
- if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
- elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of BUILD_OBJCOPY, which resolves as \"$new_path\", is invalid." >&5
-$as_echo "$as_me: The path of BUILD_OBJCOPY, which resolves as \"$new_path\", is invalid." >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&5
-$as_echo "$as_me: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&6;}
- as_fn_error $? "Cannot locate the the path of BUILD_OBJCOPY" "$LINENO" 5
- fi
- else
- input_to_shortpath="$new_path"
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
- new_path="$input_to_shortpath"
-
- input_path="$input_to_shortpath"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $input_to_shortpath | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$BUILD_OBJCOPY"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
-
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in MSYS causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- fi
-
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of BUILD_OBJCOPY, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of BUILD_OBJCOPY, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of BUILD_OBJCOPY" "$LINENO" 5
- fi
- fi
-
- # Now new_path has a complete unix path to the binary
- if test "x`$ECHO $new_path | $GREP ^/bin/`" != x; then
- # Keep paths in /bin as-is, but remove trailing .exe if any
- new_path="${new_path/%.exe/}"
- # Do not save /bin paths to all_fixpath_prefixes!
- else
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $new_path`
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
- # Output is in $new_path
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
- fi
-
- else
- # We're on a unix platform. Hooray! :)
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$BUILD_OBJCOPY"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Cannot rely on the command "which" here since it doesn't always work.
- is_absolute_path=`$ECHO "$path" | $GREP ^/`
- if test -z "$is_absolute_path"; then
- # Path to executable is not absolute. Find it.
- IFS_save="$IFS"
- IFS=:
- for p in $PATH; do
- if test -f "$p/$path" && test -x "$p/$path"; then
- new_path="$p/$path"
- break
- fi
- done
- IFS="$IFS_save"
- else
- # This is an absolute path, we can use it without further modifications.
- new_path="$path"
- fi
-
- if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of BUILD_OBJCOPY, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of BUILD_OBJCOPY, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
-$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of BUILD_OBJCOPY" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
-
- if test "x$complete" != "x$new_complete"; then
- BUILD_OBJCOPY="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting BUILD_OBJCOPY to \"$new_complete\"" >&5
-$as_echo "$as_me: Rewriting BUILD_OBJCOPY to \"$new_complete\"" >&6;}
- fi
- fi
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${BUILD_STRIP+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in strip
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_BUILD_STRIP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $BUILD_STRIP in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_BUILD_STRIP="$BUILD_STRIP" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_BUILD_STRIP="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-BUILD_STRIP=$ac_cv_path_BUILD_STRIP
-if test -n "$BUILD_STRIP"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BUILD_STRIP" >&5
-$as_echo "$BUILD_STRIP" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$BUILD_STRIP" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !BUILD_STRIP! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!BUILD_STRIP!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xBUILD_STRIP" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of BUILD_STRIP from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of BUILD_STRIP from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in strip
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_BUILD_STRIP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $BUILD_STRIP in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_BUILD_STRIP="$BUILD_STRIP" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_BUILD_STRIP="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-BUILD_STRIP=$ac_cv_path_BUILD_STRIP
-if test -n "$BUILD_STRIP"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BUILD_STRIP" >&5
-$as_echo "$BUILD_STRIP" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$BUILD_STRIP" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$BUILD_STRIP" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool BUILD_STRIP= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool BUILD_STRIP= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for BUILD_STRIP" >&5
-$as_echo_n "checking for BUILD_STRIP... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$BUILD_STRIP"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool BUILD_STRIP=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool BUILD_STRIP=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_BUILD_STRIP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $BUILD_STRIP in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_BUILD_STRIP="$BUILD_STRIP" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_BUILD_STRIP="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-BUILD_STRIP=$ac_cv_path_BUILD_STRIP
-if test -n "$BUILD_STRIP"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BUILD_STRIP" >&5
-$as_echo "$BUILD_STRIP" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$BUILD_STRIP" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool BUILD_STRIP=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool BUILD_STRIP=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for BUILD_STRIP" >&5
-$as_echo_n "checking for BUILD_STRIP... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool BUILD_STRIP=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
- # Only process if variable expands to non-empty
-
- if test "x$BUILD_STRIP" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$BUILD_STRIP"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path=`$CYGPATH -u "$path"`
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path=`$CYGPATH -u "$path"`
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of BUILD_STRIP, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of BUILD_STRIP, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of BUILD_STRIP" "$LINENO" 5
- fi
- fi
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file presence.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- # Short path failed, file does not exist as specified.
- # Try adding .exe or .cmd
- if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
- elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of BUILD_STRIP, which resolves as \"$new_path\", is invalid." >&5
-$as_echo "$as_me: The path of BUILD_STRIP, which resolves as \"$new_path\", is invalid." >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&5
-$as_echo "$as_me: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&6;}
- as_fn_error $? "Cannot locate the the path of BUILD_STRIP" "$LINENO" 5
- fi
- else
- input_to_shortpath="$new_path"
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
- new_path="$input_to_shortpath"
-
- input_path="$input_to_shortpath"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $input_to_shortpath | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$BUILD_STRIP"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
-
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in MSYS causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- fi
-
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of BUILD_STRIP, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of BUILD_STRIP, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of BUILD_STRIP" "$LINENO" 5
- fi
- fi
-
- # Now new_path has a complete unix path to the binary
- if test "x`$ECHO $new_path | $GREP ^/bin/`" != x; then
- # Keep paths in /bin as-is, but remove trailing .exe if any
- new_path="${new_path/%.exe/}"
- # Do not save /bin paths to all_fixpath_prefixes!
- else
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $new_path`
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
- # Output is in $new_path
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
- fi
-
- else
- # We're on a unix platform. Hooray! :)
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$BUILD_STRIP"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Cannot rely on the command "which" here since it doesn't always work.
- is_absolute_path=`$ECHO "$path" | $GREP ^/`
- if test -z "$is_absolute_path"; then
- # Path to executable is not absolute. Find it.
- IFS_save="$IFS"
- IFS=:
- for p in $PATH; do
- if test -f "$p/$path" && test -x "$p/$path"; then
- new_path="$p/$path"
- break
- fi
- done
- IFS="$IFS_save"
- else
- # This is an absolute path, we can use it without further modifications.
- new_path="$path"
- fi
-
- if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of BUILD_STRIP, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of BUILD_STRIP, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
-$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of BUILD_STRIP" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
-
- if test "x$complete" != "x$new_complete"; then
- BUILD_STRIP="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting BUILD_STRIP to \"$new_complete\"" >&5
-$as_echo "$as_me: Rewriting BUILD_STRIP to \"$new_complete\"" >&6;}
- fi
- fi
-
- # Assume the C compiler is the assembler
- BUILD_AS="$BUILD_CC -c"
- # Just like for the target compiler, use the compiler as linker
- BUILD_LD="$BUILD_CC"
- BUILD_LDCXX="$BUILD_CXX"
-
- PATH="$OLDPATH"
-
-
- COMPILER=$BUILD_CC
- COMPILER_NAME=BuildC
-
- if test "x$TOOLCHAIN_TYPE" = xsolstudio; then
- # cc -V output typically looks like
- # cc: Sun C 5.12 Linux_i386 2011/11/16
- # or
- # cc: Studio 12.5 Sun C 5.14 SunOS_sparc 2016/05/31
- COMPILER_VERSION_OUTPUT=`$COMPILER -V 2>&1`
- # Check that this is likely to be the Solaris Studio cc.
- $ECHO "$COMPILER_VERSION_OUTPUT" | $GREP "^.* Sun $COMPILER_NAME" > /dev/null
- if test $? -ne 0; then
- ALT_VERSION_OUTPUT=`$COMPILER --version 2>&1`
- { $as_echo "$as_me:${as_lineno-$LINENO}: The $COMPILER_NAME compiler (located as $COMPILER) does not seem to be the required $TOOLCHAIN_TYPE compiler." >&5
-$as_echo "$as_me: The $COMPILER_NAME compiler (located as $COMPILER) does not seem to be the required $TOOLCHAIN_TYPE compiler." >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: The result from running with -V was: \"$COMPILER_VERSION_OUTPUT\"" >&5
-$as_echo "$as_me: The result from running with -V was: \"$COMPILER_VERSION_OUTPUT\"" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: The result from running with --version was: \"$ALT_VERSION_OUTPUT\"" >&5
-$as_echo "$as_me: The result from running with --version was: \"$ALT_VERSION_OUTPUT\"" >&6;}
- as_fn_error $? "A $TOOLCHAIN_TYPE compiler is required. Try setting --with-tools-dir." "$LINENO" 5
- fi
- # Remove usage instructions (if present), and
- # collapse compiler output into a single line
- COMPILER_VERSION_STRING=`$ECHO $COMPILER_VERSION_OUTPUT | \
- $SED -e 's/ *[Uu]sage:.*//'`
- COMPILER_VERSION_NUMBER=`$ECHO $COMPILER_VERSION_OUTPUT | \
- $SED -e "s/^.*[ ,\t]$COMPILER_NAME[ ,\t]\([1-9]\.[0-9][0-9]*\).*/\1/"`
- elif test "x$TOOLCHAIN_TYPE" = xxlc; then
- # xlc -qversion output typically looks like
- # IBM XL C/C++ for AIX, V11.1 (5724-X13)
- # Version: 11.01.0000.0015
- COMPILER_VERSION_OUTPUT=`$COMPILER -qversion 2>&1`
- # Check that this is likely to be the IBM XL C compiler.
- $ECHO "$COMPILER_VERSION_OUTPUT" | $GREP "IBM XL C" > /dev/null
- if test $? -ne 0; then
- ALT_VERSION_OUTPUT=`$COMPILER --version 2>&1`
- { $as_echo "$as_me:${as_lineno-$LINENO}: The $COMPILER_NAME compiler (located as $COMPILER) does not seem to be the required $TOOLCHAIN_TYPE compiler." >&5
-$as_echo "$as_me: The $COMPILER_NAME compiler (located as $COMPILER) does not seem to be the required $TOOLCHAIN_TYPE compiler." >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: The result from running with -qversion was: \"$COMPILER_VERSION_OUTPUT\"" >&5
-$as_echo "$as_me: The result from running with -qversion was: \"$COMPILER_VERSION_OUTPUT\"" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: The result from running with --version was: \"$ALT_VERSION_OUTPUT\"" >&5
-$as_echo "$as_me: The result from running with --version was: \"$ALT_VERSION_OUTPUT\"" >&6;}
- as_fn_error $? "A $TOOLCHAIN_TYPE compiler is required. Try setting --with-tools-dir." "$LINENO" 5
- fi
- # Collapse compiler output into a single line
- COMPILER_VERSION_STRING=`$ECHO $COMPILER_VERSION_OUTPUT`
- COMPILER_VERSION_NUMBER=`$ECHO $COMPILER_VERSION_OUTPUT | \
- $SED -e 's/^.*, V\([1-9][0-9.]*\).*$/\1/'`
- elif test "x$TOOLCHAIN_TYPE" = xmicrosoft; then
- # There is no specific version flag, but all output starts with a version string.
- # First line typically looks something like:
- # Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 16.00.40219.01 for 80x86
- COMPILER_VERSION_OUTPUT=`$COMPILER 2>&1 | $HEAD -n 1 | $TR -d '\r'`
- # Check that this is likely to be Microsoft CL.EXE.
- $ECHO "$COMPILER_VERSION_OUTPUT" | $GREP "Microsoft.*Compiler" > /dev/null
- if test $? -ne 0; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The $COMPILER_NAME compiler (located as $COMPILER) does not seem to be the required $TOOLCHAIN_TYPE compiler." >&5
-$as_echo "$as_me: The $COMPILER_NAME compiler (located as $COMPILER) does not seem to be the required $TOOLCHAIN_TYPE compiler." >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: The result from running it was: \"$COMPILER_VERSION_OUTPUT\"" >&5
-$as_echo "$as_me: The result from running it was: \"$COMPILER_VERSION_OUTPUT\"" >&6;}
- as_fn_error $? "A $TOOLCHAIN_TYPE compiler is required. Try setting --with-tools-dir." "$LINENO" 5
- fi
- # Collapse compiler output into a single line
- COMPILER_VERSION_STRING=`$ECHO $COMPILER_VERSION_OUTPUT`
- COMPILER_VERSION_NUMBER=`$ECHO $COMPILER_VERSION_OUTPUT | \
- $SED -e 's/^.*ersion.\([1-9][0-9.]*\) .*$/\1/'`
- elif test "x$TOOLCHAIN_TYPE" = xgcc; then
- # gcc --version output typically looks like
- # gcc (Ubuntu/Linaro 4.8.1-10ubuntu9) 4.8.1
- # Copyright (C) 2013 Free Software Foundation, Inc.
- # This is free software; see the source for copying conditions. There is NO
- # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- COMPILER_VERSION_OUTPUT=`$COMPILER --version 2>&1`
- # Check that this is likely to be GCC.
- $ECHO "$COMPILER_VERSION_OUTPUT" | $GREP "Free Software Foundation" > /dev/null
- if test $? -ne 0; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The $COMPILER_NAME compiler (located as $COMPILER) does not seem to be the required $TOOLCHAIN_TYPE compiler." >&5
-$as_echo "$as_me: The $COMPILER_NAME compiler (located as $COMPILER) does not seem to be the required $TOOLCHAIN_TYPE compiler." >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: The result from running with --version was: \"$COMPILER_VERSION\"" >&5
-$as_echo "$as_me: The result from running with --version was: \"$COMPILER_VERSION\"" >&6;}
- as_fn_error $? "A $TOOLCHAIN_TYPE compiler is required. Try setting --with-tools-dir." "$LINENO" 5
- fi
- # Remove Copyright and legalese from version string, and
- # collapse into a single line
- COMPILER_VERSION_STRING=`$ECHO $COMPILER_VERSION_OUTPUT | \
- $SED -e 's/ *Copyright .*//'`
- COMPILER_VERSION_NUMBER=`$ECHO $COMPILER_VERSION_OUTPUT | \
- $SED -e 's/^.* \([1-9]\.[0-9.]*\)[^0-9.].*$/\1/'`
- elif test "x$TOOLCHAIN_TYPE" = xclang; then
- # clang --version output typically looks like
- # Apple LLVM version 5.0 (clang-500.2.79) (based on LLVM 3.3svn)
- # clang version 3.3 (tags/RELEASE_33/final)
- # or
- # Debian clang version 3.2-7ubuntu1 (tags/RELEASE_32/final) (based on LLVM 3.2)
- # Target: x86_64-pc-linux-gnu
- # Thread model: posix
- COMPILER_VERSION_OUTPUT=`$COMPILER --version 2>&1`
- # Check that this is likely to be clang
- $ECHO "$COMPILER_VERSION_OUTPUT" | $GREP "clang" > /dev/null
- if test $? -ne 0; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The $COMPILER_NAME compiler (located as $COMPILER) does not seem to be the required $TOOLCHAIN_TYPE compiler." >&5
-$as_echo "$as_me: The $COMPILER_NAME compiler (located as $COMPILER) does not seem to be the required $TOOLCHAIN_TYPE compiler." >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: The result from running with --version was: \"$COMPILER_VERSION_OUTPUT\"" >&5
-$as_echo "$as_me: The result from running with --version was: \"$COMPILER_VERSION_OUTPUT\"" >&6;}
- as_fn_error $? "A $TOOLCHAIN_TYPE compiler is required. Try setting --with-tools-dir." "$LINENO" 5
- fi
- # Collapse compiler output into a single line
- COMPILER_VERSION_STRING=`$ECHO $COMPILER_VERSION_OUTPUT`
- COMPILER_VERSION_NUMBER=`$ECHO $COMPILER_VERSION_OUTPUT | \
- $SED -e 's/^.* version \([1-9][0-9.]*\).*$/\1/'`
- else
- as_fn_error $? "Unknown toolchain type $TOOLCHAIN_TYPE." "$LINENO" 5
- fi
- # This sets CC_VERSION_NUMBER or CXX_VERSION_NUMBER. (This comment is a grep marker)
- BUILD_CC_VERSION_NUMBER="$COMPILER_VERSION_NUMBER"
- # This sets CC_VERSION_STRING or CXX_VERSION_STRING. (This comment is a grep marker)
- BUILD_CC_VERSION_STRING="$COMPILER_VERSION_STRING"
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: Using $TOOLCHAIN_TYPE $COMPILER_NAME compiler version $COMPILER_VERSION_NUMBER [$COMPILER_VERSION_STRING]" >&5
-$as_echo "$as_me: Using $TOOLCHAIN_TYPE $COMPILER_NAME compiler version $COMPILER_VERSION_NUMBER [$COMPILER_VERSION_STRING]" >&6;}
-
-
- COMPILER=$BUILD_CXX
- COMPILER_NAME=BuildC++
-
- if test "x$TOOLCHAIN_TYPE" = xsolstudio; then
- # cc -V output typically looks like
- # cc: Sun C 5.12 Linux_i386 2011/11/16
- # or
- # cc: Studio 12.5 Sun C 5.14 SunOS_sparc 2016/05/31
- COMPILER_VERSION_OUTPUT=`$COMPILER -V 2>&1`
- # Check that this is likely to be the Solaris Studio cc.
- $ECHO "$COMPILER_VERSION_OUTPUT" | $GREP "^.* Sun $COMPILER_NAME" > /dev/null
- if test $? -ne 0; then
- ALT_VERSION_OUTPUT=`$COMPILER --version 2>&1`
- { $as_echo "$as_me:${as_lineno-$LINENO}: The $COMPILER_NAME compiler (located as $COMPILER) does not seem to be the required $TOOLCHAIN_TYPE compiler." >&5
-$as_echo "$as_me: The $COMPILER_NAME compiler (located as $COMPILER) does not seem to be the required $TOOLCHAIN_TYPE compiler." >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: The result from running with -V was: \"$COMPILER_VERSION_OUTPUT\"" >&5
-$as_echo "$as_me: The result from running with -V was: \"$COMPILER_VERSION_OUTPUT\"" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: The result from running with --version was: \"$ALT_VERSION_OUTPUT\"" >&5
-$as_echo "$as_me: The result from running with --version was: \"$ALT_VERSION_OUTPUT\"" >&6;}
- as_fn_error $? "A $TOOLCHAIN_TYPE compiler is required. Try setting --with-tools-dir." "$LINENO" 5
- fi
- # Remove usage instructions (if present), and
- # collapse compiler output into a single line
- COMPILER_VERSION_STRING=`$ECHO $COMPILER_VERSION_OUTPUT | \
- $SED -e 's/ *[Uu]sage:.*//'`
- COMPILER_VERSION_NUMBER=`$ECHO $COMPILER_VERSION_OUTPUT | \
- $SED -e "s/^.*[ ,\t]$COMPILER_NAME[ ,\t]\([1-9]\.[0-9][0-9]*\).*/\1/"`
- elif test "x$TOOLCHAIN_TYPE" = xxlc; then
- # xlc -qversion output typically looks like
- # IBM XL C/C++ for AIX, V11.1 (5724-X13)
- # Version: 11.01.0000.0015
- COMPILER_VERSION_OUTPUT=`$COMPILER -qversion 2>&1`
- # Check that this is likely to be the IBM XL C compiler.
- $ECHO "$COMPILER_VERSION_OUTPUT" | $GREP "IBM XL C" > /dev/null
- if test $? -ne 0; then
- ALT_VERSION_OUTPUT=`$COMPILER --version 2>&1`
- { $as_echo "$as_me:${as_lineno-$LINENO}: The $COMPILER_NAME compiler (located as $COMPILER) does not seem to be the required $TOOLCHAIN_TYPE compiler." >&5
-$as_echo "$as_me: The $COMPILER_NAME compiler (located as $COMPILER) does not seem to be the required $TOOLCHAIN_TYPE compiler." >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: The result from running with -qversion was: \"$COMPILER_VERSION_OUTPUT\"" >&5
-$as_echo "$as_me: The result from running with -qversion was: \"$COMPILER_VERSION_OUTPUT\"" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: The result from running with --version was: \"$ALT_VERSION_OUTPUT\"" >&5
-$as_echo "$as_me: The result from running with --version was: \"$ALT_VERSION_OUTPUT\"" >&6;}
- as_fn_error $? "A $TOOLCHAIN_TYPE compiler is required. Try setting --with-tools-dir." "$LINENO" 5
- fi
- # Collapse compiler output into a single line
- COMPILER_VERSION_STRING=`$ECHO $COMPILER_VERSION_OUTPUT`
- COMPILER_VERSION_NUMBER=`$ECHO $COMPILER_VERSION_OUTPUT | \
- $SED -e 's/^.*, V\([1-9][0-9.]*\).*$/\1/'`
- elif test "x$TOOLCHAIN_TYPE" = xmicrosoft; then
- # There is no specific version flag, but all output starts with a version string.
- # First line typically looks something like:
- # Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 16.00.40219.01 for 80x86
- COMPILER_VERSION_OUTPUT=`$COMPILER 2>&1 | $HEAD -n 1 | $TR -d '\r'`
- # Check that this is likely to be Microsoft CL.EXE.
- $ECHO "$COMPILER_VERSION_OUTPUT" | $GREP "Microsoft.*Compiler" > /dev/null
- if test $? -ne 0; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The $COMPILER_NAME compiler (located as $COMPILER) does not seem to be the required $TOOLCHAIN_TYPE compiler." >&5
-$as_echo "$as_me: The $COMPILER_NAME compiler (located as $COMPILER) does not seem to be the required $TOOLCHAIN_TYPE compiler." >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: The result from running it was: \"$COMPILER_VERSION_OUTPUT\"" >&5
-$as_echo "$as_me: The result from running it was: \"$COMPILER_VERSION_OUTPUT\"" >&6;}
- as_fn_error $? "A $TOOLCHAIN_TYPE compiler is required. Try setting --with-tools-dir." "$LINENO" 5
- fi
- # Collapse compiler output into a single line
- COMPILER_VERSION_STRING=`$ECHO $COMPILER_VERSION_OUTPUT`
- COMPILER_VERSION_NUMBER=`$ECHO $COMPILER_VERSION_OUTPUT | \
- $SED -e 's/^.*ersion.\([1-9][0-9.]*\) .*$/\1/'`
- elif test "x$TOOLCHAIN_TYPE" = xgcc; then
- # gcc --version output typically looks like
- # gcc (Ubuntu/Linaro 4.8.1-10ubuntu9) 4.8.1
- # Copyright (C) 2013 Free Software Foundation, Inc.
- # This is free software; see the source for copying conditions. There is NO
- # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- COMPILER_VERSION_OUTPUT=`$COMPILER --version 2>&1`
- # Check that this is likely to be GCC.
- $ECHO "$COMPILER_VERSION_OUTPUT" | $GREP "Free Software Foundation" > /dev/null
- if test $? -ne 0; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The $COMPILER_NAME compiler (located as $COMPILER) does not seem to be the required $TOOLCHAIN_TYPE compiler." >&5
-$as_echo "$as_me: The $COMPILER_NAME compiler (located as $COMPILER) does not seem to be the required $TOOLCHAIN_TYPE compiler." >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: The result from running with --version was: \"$COMPILER_VERSION\"" >&5
-$as_echo "$as_me: The result from running with --version was: \"$COMPILER_VERSION\"" >&6;}
- as_fn_error $? "A $TOOLCHAIN_TYPE compiler is required. Try setting --with-tools-dir." "$LINENO" 5
- fi
- # Remove Copyright and legalese from version string, and
- # collapse into a single line
- COMPILER_VERSION_STRING=`$ECHO $COMPILER_VERSION_OUTPUT | \
- $SED -e 's/ *Copyright .*//'`
- COMPILER_VERSION_NUMBER=`$ECHO $COMPILER_VERSION_OUTPUT | \
- $SED -e 's/^.* \([1-9]\.[0-9.]*\)[^0-9.].*$/\1/'`
- elif test "x$TOOLCHAIN_TYPE" = xclang; then
- # clang --version output typically looks like
- # Apple LLVM version 5.0 (clang-500.2.79) (based on LLVM 3.3svn)
- # clang version 3.3 (tags/RELEASE_33/final)
- # or
- # Debian clang version 3.2-7ubuntu1 (tags/RELEASE_32/final) (based on LLVM 3.2)
- # Target: x86_64-pc-linux-gnu
- # Thread model: posix
- COMPILER_VERSION_OUTPUT=`$COMPILER --version 2>&1`
- # Check that this is likely to be clang
- $ECHO "$COMPILER_VERSION_OUTPUT" | $GREP "clang" > /dev/null
- if test $? -ne 0; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The $COMPILER_NAME compiler (located as $COMPILER) does not seem to be the required $TOOLCHAIN_TYPE compiler." >&5
-$as_echo "$as_me: The $COMPILER_NAME compiler (located as $COMPILER) does not seem to be the required $TOOLCHAIN_TYPE compiler." >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: The result from running with --version was: \"$COMPILER_VERSION_OUTPUT\"" >&5
-$as_echo "$as_me: The result from running with --version was: \"$COMPILER_VERSION_OUTPUT\"" >&6;}
- as_fn_error $? "A $TOOLCHAIN_TYPE compiler is required. Try setting --with-tools-dir." "$LINENO" 5
- fi
- # Collapse compiler output into a single line
- COMPILER_VERSION_STRING=`$ECHO $COMPILER_VERSION_OUTPUT`
- COMPILER_VERSION_NUMBER=`$ECHO $COMPILER_VERSION_OUTPUT | \
- $SED -e 's/^.* version \([1-9][0-9.]*\).*$/\1/'`
- else
- as_fn_error $? "Unknown toolchain type $TOOLCHAIN_TYPE." "$LINENO" 5
- fi
- # This sets CC_VERSION_NUMBER or CXX_VERSION_NUMBER. (This comment is a grep marker)
- BUILD_CXX_VERSION_NUMBER="$COMPILER_VERSION_NUMBER"
- # This sets CC_VERSION_STRING or CXX_VERSION_STRING. (This comment is a grep marker)
- BUILD_CXX_VERSION_STRING="$COMPILER_VERSION_STRING"
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: Using $TOOLCHAIN_TYPE $COMPILER_NAME compiler version $COMPILER_VERSION_NUMBER [$COMPILER_VERSION_STRING]" >&5
-$as_echo "$as_me: Using $TOOLCHAIN_TYPE $COMPILER_NAME compiler version $COMPILER_VERSION_NUMBER [$COMPILER_VERSION_STRING]" >&6;}
-
-
- if test "x$BUILD_CC_VERSION_NUMBER" != "x$BUILD_CXX_VERSION_NUMBER"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: C and C++ compiler have different version numbers, $BUILD_CC_VERSION_NUMBER vs $BUILD_CXX_VERSION_NUMBER." >&5
-$as_echo "$as_me: WARNING: C and C++ compiler have different version numbers, $BUILD_CC_VERSION_NUMBER vs $BUILD_CXX_VERSION_NUMBER." >&2;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: This typically indicates a broken setup, and is not supported" >&5
-$as_echo "$as_me: WARNING: This typically indicates a broken setup, and is not supported" >&2;}
- fi
-
- # We only check CC_VERSION_NUMBER since we assume CXX_VERSION_NUMBER is equal.
- if [[ "[$]BUILD_CC_VERSION_NUMBER" =~ (.*\.){4} ]] ; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: C compiler version number has more than four parts (W.X.Y.Z): $BUILD_CC_VERSION_NUMBER. Comparisons might be wrong." >&5
-$as_echo "$as_me: WARNING: C compiler version number has more than four parts (W.X.Y.Z): $BUILD_CC_VERSION_NUMBER. Comparisons might be wrong." >&2;}
- fi
-
- if [[ "[$]BUILD_CC_VERSION_NUMBER" =~ [0-9]{6} ]] ; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: C compiler version number has a part larger than 99999: $BUILD_CC_VERSION_NUMBER. Comparisons might be wrong." >&5
-$as_echo "$as_me: WARNING: C compiler version number has a part larger than 99999: $BUILD_CC_VERSION_NUMBER. Comparisons might be wrong." >&2;}
- fi
-
- OPENJDK_BUILD_COMPARABLE_ACTUAL_VERSION=`$AWK -F. '{ printf("%05d%05d%05d%05d\n", $1, $2, $3, $4) }' <<< "$BUILD_CC_VERSION_NUMBER"`
-
- else
- # If we are not cross compiling, use the normal target compilers for
- # building the build platform executables.
- BUILD_CC="$CC"
- BUILD_CXX="$CXX"
- BUILD_LD="$LD"
- BUILD_LDCXX="$LDCXX"
- BUILD_NM="$NM"
- BUILD_AS="$AS"
- BUILD_OBJCOPY="$OBJCOPY"
- BUILD_STRIP="$STRIP"
- BUILD_SYSROOT_CFLAGS="$SYSROOT_CFLAGS"
- BUILD_SYSROOT_LDFLAGS="$SYSROOT_LDFLAGS"
- BUILD_AR="$AR"
-
-
- if test "x$CC_VERSION_NUMBER" != "x$CXX_VERSION_NUMBER"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: C and C++ compiler have different version numbers, $CC_VERSION_NUMBER vs $CXX_VERSION_NUMBER." >&5
-$as_echo "$as_me: WARNING: C and C++ compiler have different version numbers, $CC_VERSION_NUMBER vs $CXX_VERSION_NUMBER." >&2;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: This typically indicates a broken setup, and is not supported" >&5
-$as_echo "$as_me: WARNING: This typically indicates a broken setup, and is not supported" >&2;}
- fi
-
- # We only check CC_VERSION_NUMBER since we assume CXX_VERSION_NUMBER is equal.
- if [[ "[$]CC_VERSION_NUMBER" =~ (.*\.){4} ]] ; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: C compiler version number has more than four parts (W.X.Y.Z): $CC_VERSION_NUMBER. Comparisons might be wrong." >&5
-$as_echo "$as_me: WARNING: C compiler version number has more than four parts (W.X.Y.Z): $CC_VERSION_NUMBER. Comparisons might be wrong." >&2;}
- fi
-
- if [[ "[$]CC_VERSION_NUMBER" =~ [0-9]{6} ]] ; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: C compiler version number has a part larger than 99999: $CC_VERSION_NUMBER. Comparisons might be wrong." >&5
-$as_echo "$as_me: WARNING: C compiler version number has a part larger than 99999: $CC_VERSION_NUMBER. Comparisons might be wrong." >&2;}
- fi
-
- OPENJDK_BUILD_COMPARABLE_ACTUAL_VERSION=`$AWK -F. '{ printf("%05d%05d%05d%05d\n", $1, $2, $3, $4) }' <<< "$CC_VERSION_NUMBER"`
-
- fi
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- # The package path is used only on macosx?
- # FIXME: clean this up, and/or move it elsewhere.
- PACKAGE_PATH=/opt/local
-
-
- # Check for extra potential brokenness.
- if test "x$TOOLCHAIN_TYPE" = xmicrosoft; then
- # On Windows, double-check that we got the right compiler.
- CC_VERSION_OUTPUT=`$CC 2>&1 | $HEAD -n 1 | $TR -d '\r'`
- COMPILER_CPU_TEST=`$ECHO $CC_VERSION_OUTPUT | $SED -n "s/^.* \(.*\)$/\1/p"`
- if test "x$OPENJDK_TARGET_CPU" = "xx86"; then
- if test "x$COMPILER_CPU_TEST" != "x80x86" -a "x$COMPILER_CPU_TEST" != "xx86"; then
- as_fn_error $? "Target CPU mismatch. We are building for $OPENJDK_TARGET_CPU but CL is for \"$COMPILER_CPU_TEST\"; expected \"80x86\" or \"x86\"." "$LINENO" 5
- fi
- elif test "x$OPENJDK_TARGET_CPU" = "xx86_64"; then
- if test "x$COMPILER_CPU_TEST" != "xx64"; then
- as_fn_error $? "Target CPU mismatch. We are building for $OPENJDK_TARGET_CPU but CL is for \"$COMPILER_CPU_TEST\"; expected \"x64\"." "$LINENO" 5
- fi
- fi
- fi
-
- if test "x$TOOLCHAIN_TYPE" = xgcc; then
- # If this is a --hash-style=gnu system, use --hash-style=both, why?
- HAS_GNU_HASH=`$CC -dumpspecs 2>/dev/null | $GREP 'hash-style=gnu'`
- # This is later checked when setting flags.
-
- # "-Og" suppported for GCC 4.8 and later
- CFLAG_OPTIMIZE_DEBUG_FLAG="-Og"
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- # Execute function body
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- # Execute function body
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if the C compiler supports \"$CFLAG_OPTIMIZE_DEBUG_FLAG\"" >&5
-$as_echo_n "checking if the C compiler supports \"$CFLAG_OPTIMIZE_DEBUG_FLAG\"... " >&6; }
- supports=yes
-
- saved_cflags="$CFLAGS"
- CFLAGS="$CFLAGS $CFLAG_OPTIMIZE_DEBUG_FLAG"
- ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-int i;
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-
-else
- supports=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
- CFLAGS="$saved_cflags"
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $supports" >&5
-$as_echo "$supports" >&6; }
- if test "x$supports" = "xyes" ; then
- :
- C_COMP_SUPPORTS="yes"
- else
- :
- C_COMP_SUPPORTS="no"
- fi
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- # Execute function body
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if the C++ compiler supports \"$CFLAG_OPTIMIZE_DEBUG_FLAG\"" >&5
-$as_echo_n "checking if the C++ compiler supports \"$CFLAG_OPTIMIZE_DEBUG_FLAG\"... " >&6; }
- supports=yes
-
- saved_cxxflags="$CXXFLAGS"
- CXXFLAGS="$CXXFLAG $CFLAG_OPTIMIZE_DEBUG_FLAG"
- ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-int i;
-_ACEOF
-if ac_fn_cxx_try_compile "$LINENO"; then :
-
-else
- supports=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
- CXXFLAGS="$saved_cxxflags"
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $supports" >&5
-$as_echo "$supports" >&6; }
- if test "x$supports" = "xyes" ; then
- :
- CXX_COMP_SUPPORTS="yes"
- else
- :
- CXX_COMP_SUPPORTS="no"
- fi
-
-
-
-
-
-
-
-
-
-
-
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if both compilers support \"$CFLAG_OPTIMIZE_DEBUG_FLAG\"" >&5
-$as_echo_n "checking if both compilers support \"$CFLAG_OPTIMIZE_DEBUG_FLAG\"... " >&6; }
- supports=no
- if test "x$C_COMP_SUPPORTS" = "xyes" -a "x$CXX_COMP_SUPPORTS" = "xyes"; then supports=yes; fi
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $supports" >&5
-$as_echo "$supports" >&6; }
- if test "x$supports" = "xyes" ; then
- :
- HAS_CFLAG_OPTIMIZE_DEBUG=true
- else
- :
- HAS_CFLAG_OPTIMIZE_DEBUG=false
- fi
-
-
-
-
-
-
-
- # "-z relro" supported in GNU binutils 2.17 and later
- LINKER_RELRO_FLAG="-Wl,-z,relro"
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- # Execute function body
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if linker supports \"$LINKER_RELRO_FLAG\"" >&5
-$as_echo_n "checking if linker supports \"$LINKER_RELRO_FLAG\"... " >&6; }
- supports=yes
-
- saved_ldflags="$LDFLAGS"
- LDFLAGS="$LDFLAGS $LINKER_RELRO_FLAG"
- ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-
-else
- supports=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
- ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
- LDFLAGS="$saved_ldflags"
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $supports" >&5
-$as_echo "$supports" >&6; }
- if test "x$supports" = "xyes" ; then
- :
- HAS_LINKER_RELRO=true
- else
- :
- HAS_LINKER_RELRO=false
- fi
-
-
-
-
-
-
-
-
-
-
-
-
-
- # "-z now" supported in GNU binutils 2.11 and later
- LINKER_NOW_FLAG="-Wl,-z,now"
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- # Execute function body
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if linker supports \"$LINKER_NOW_FLAG\"" >&5
-$as_echo_n "checking if linker supports \"$LINKER_NOW_FLAG\"... " >&6; }
- supports=yes
-
- saved_ldflags="$LDFLAGS"
- LDFLAGS="$LDFLAGS $LINKER_NOW_FLAG"
- ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-
-else
- supports=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
- ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
- LDFLAGS="$saved_ldflags"
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $supports" >&5
-$as_echo "$supports" >&6; }
- if test "x$supports" = "xyes" ; then
- :
- HAS_LINKER_NOW=true
- else
- :
- HAS_LINKER_NOW=false
- fi
-
-
-
-
-
-
-
-
-
-
-
-
- fi
-
- # Check for broken SuSE 'ld' for which 'Only anonymous version tag is allowed
- # in executable.'
- USING_BROKEN_SUSE_LD=no
- if test "x$OPENJDK_TARGET_OS" = xlinux && test "x$TOOLCHAIN_TYPE" = xgcc; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for broken SuSE 'ld' which only understands anonymous version tags in executables" >&5
-$as_echo_n "checking for broken SuSE 'ld' which only understands anonymous version tags in executables... " >&6; }
- $ECHO "SUNWprivate_1.1 { local: *; };" > version-script.map
- $ECHO "int main() { }" > main.c
- if $CXX -Wl,-version-script=version-script.map main.c 2>&5 >&5; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- USING_BROKEN_SUSE_LD=no
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
- USING_BROKEN_SUSE_LD=yes
- fi
- $RM version-script.map main.c a.out
- fi
-
-
- # Setup hotspot lecagy names for toolchains
- HOTSPOT_TOOLCHAIN_TYPE=$TOOLCHAIN_TYPE
- if test "x$TOOLCHAIN_TYPE" = xclang; then
- HOTSPOT_TOOLCHAIN_TYPE=gcc
- elif test "x$TOOLCHAIN_TYPE" = xsolstudio; then
- HOTSPOT_TOOLCHAIN_TYPE=sparcWorks
- elif test "x$TOOLCHAIN_TYPE" = xmicrosoft; then
- HOTSPOT_TOOLCHAIN_TYPE=visCPP
- fi
-
-
-
-# Setup the JTReg Regression Test Harness.
-
-
-# Check whether --with-jtreg was given.
-if test "${with_jtreg+set}" = set; then :
- withval=$with_jtreg;
-fi
-
-
- if test "x$with_jtreg" = xno; then
- # jtreg disabled
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for jtreg test harness" >&5
-$as_echo_n "checking for jtreg test harness... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, disabled" >&5
-$as_echo "no, disabled" >&6; }
- elif test "x$with_jtreg" != xyes && test "x$with_jtreg" != x; then
- # An explicit path is specified, use it.
- JT_HOME="$with_jtreg"
-
- # Only process if variable expands to non-empty
-
- if test "x$JT_HOME" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- path="$JT_HOME"
- new_path=`$CYGPATH -u "$path"`
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file precense.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of JT_HOME, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of JT_HOME, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Cannot locate the the path of JT_HOME" "$LINENO" 5
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
-
- if test "x$path" != "x$new_path"; then
- JT_HOME="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting JT_HOME to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting JT_HOME to \"$new_path\"" >&6;}
- fi
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- path="$JT_HOME"
- has_colon=`$ECHO $path | $GREP ^.:`
- new_path="$path"
- if test "x$has_colon" = x; then
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $path`
- fi
-
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- if test "x$path" != "x$new_path"; then
- JT_HOME="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting JT_HOME to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting JT_HOME to \"$new_path\"" >&6;}
- fi
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
-
- else
- # We're on a unix platform. Hooray! :)
- path="$JT_HOME"
- has_space=`$ECHO "$path" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of JT_HOME, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of JT_HOME, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
- fi
-
- # Use eval to expand a potential ~
- eval path="$path"
- if test ! -f "$path" && test ! -d "$path"; then
- as_fn_error $? "The path of JT_HOME, which resolves as \"$path\", is not found." "$LINENO" 5
- fi
-
- if test -d "$path"; then
- JT_HOME="`cd "$path"; $THEPWDCMD -L`"
- else
- dir="`$DIRNAME "$path"`"
- base="`$BASENAME "$path"`"
- JT_HOME="`cd "$dir"; $THEPWDCMD -L`/$base"
- fi
- fi
- fi
-
- if test ! -d "$JT_HOME"; then
- as_fn_error $? "jtreg home directory from --with-jtreg=$with_jtreg does not exist" "$LINENO" 5
- fi
-
- if test ! -e "$JT_HOME/lib/jtreg.jar"; then
- as_fn_error $? "jtreg home directory from --with-jtreg=$with_jtreg is not a valid jtreg home" "$LINENO" 5
- fi
-
- JTREGEXE="$JT_HOME/bin/jtreg"
- if test ! -x "$JTREGEXE"; then
- as_fn_error $? "jtreg home directory from --with-jtreg=$with_jtreg does not contain valid jtreg executable" "$LINENO" 5
- fi
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for jtreg test harness" >&5
-$as_echo_n "checking for jtreg test harness... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $JT_HOME" >&5
-$as_echo "$JT_HOME" >&6; }
- else
- # Try to locate jtreg
- if test "x$JT_HOME" != x; then
- # JT_HOME set in environment, use it
- if test ! -d "$JT_HOME"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring JT_HOME pointing to invalid directory: $JT_HOME" >&5
-$as_echo "$as_me: WARNING: Ignoring JT_HOME pointing to invalid directory: $JT_HOME" >&2;}
- JT_HOME=
- else
- if test ! -e "$JT_HOME/lib/jtreg.jar"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring JT_HOME which is not a valid jtreg home: $JT_HOME" >&5
-$as_echo "$as_me: WARNING: Ignoring JT_HOME which is not a valid jtreg home: $JT_HOME" >&2;}
- JT_HOME=
- elif test ! -x "$JT_HOME/bin/jtreg"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring JT_HOME which does not contain valid jtreg executable: $JT_HOME" >&5
-$as_echo "$as_me: WARNING: Ignoring JT_HOME which does not contain valid jtreg executable: $JT_HOME" >&2;}
- JT_HOME=
- else
- JTREGEXE="$JT_HOME/bin/jtreg"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Located jtreg using JT_HOME from environment" >&5
-$as_echo "$as_me: Located jtreg using JT_HOME from environment" >&6;}
- fi
- fi
- fi
-
- if test "x$JT_HOME" = x; then
- # JT_HOME is not set in environment, or was deemed invalid.
- # Try to find jtreg on path
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${JTREGEXE+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in jtreg
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_JTREGEXE+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $JTREGEXE in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_JTREGEXE="$JTREGEXE" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_JTREGEXE="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-JTREGEXE=$ac_cv_path_JTREGEXE
-if test -n "$JTREGEXE"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $JTREGEXE" >&5
-$as_echo "$JTREGEXE" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$JTREGEXE" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !JTREGEXE! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!JTREGEXE!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xJTREGEXE" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of JTREGEXE from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of JTREGEXE from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in jtreg
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_JTREGEXE+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $JTREGEXE in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_JTREGEXE="$JTREGEXE" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_JTREGEXE="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-JTREGEXE=$ac_cv_path_JTREGEXE
-if test -n "$JTREGEXE"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $JTREGEXE" >&5
-$as_echo "$JTREGEXE" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$JTREGEXE" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$JTREGEXE" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool JTREGEXE= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool JTREGEXE= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for JTREGEXE" >&5
-$as_echo_n "checking for JTREGEXE... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$JTREGEXE"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool JTREGEXE=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool JTREGEXE=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_JTREGEXE+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $JTREGEXE in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_JTREGEXE="$JTREGEXE" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_JTREGEXE="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-JTREGEXE=$ac_cv_path_JTREGEXE
-if test -n "$JTREGEXE"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $JTREGEXE" >&5
-$as_echo "$JTREGEXE" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$JTREGEXE" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool JTREGEXE=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool JTREGEXE=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for JTREGEXE" >&5
-$as_echo_n "checking for JTREGEXE... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool JTREGEXE=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
- if test "x$JTREGEXE" != x; then
- # That's good, now try to derive JT_HOME
- JT_HOME=`(cd $($DIRNAME $JTREGEXE)/.. && pwd)`
- if test ! -e "$JT_HOME/lib/jtreg.jar"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring jtreg from path since a valid jtreg home cannot be found" >&5
-$as_echo "$as_me: WARNING: Ignoring jtreg from path since a valid jtreg home cannot be found" >&2;}
- JT_HOME=
- JTREGEXE=
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: Located jtreg using jtreg executable in path" >&5
-$as_echo "$as_me: Located jtreg using jtreg executable in path" >&6;}
- fi
- fi
- fi
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for jtreg test harness" >&5
-$as_echo_n "checking for jtreg test harness... " >&6; }
- if test "x$JT_HOME" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $JT_HOME" >&5
-$as_echo "$JT_HOME" >&6; }
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, not found" >&5
-$as_echo "no, not found" >&6; }
-
- if test "x$with_jtreg" = xyes; then
- as_fn_error $? "--with-jtreg was specified, but no jtreg found." "$LINENO" 5
- fi
- fi
- fi
-
-
- # Only process if variable expands to non-empty
-
- if test "x$JTREGEXE" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$JTREGEXE"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path=`$CYGPATH -u "$path"`
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path=`$CYGPATH -u "$path"`
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in cygwin causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path=`$CYGPATH -u "$path"`
- fi
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of JTREGEXE, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of JTREGEXE, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of JTREGEXE" "$LINENO" 5
- fi
- fi
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file presence.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- # Short path failed, file does not exist as specified.
- # Try adding .exe or .cmd
- if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
- elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of JTREGEXE, which resolves as \"$new_path\", is invalid." >&5
-$as_echo "$as_me: The path of JTREGEXE, which resolves as \"$new_path\", is invalid." >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&5
-$as_echo "$as_me: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&6;}
- as_fn_error $? "Cannot locate the the path of JTREGEXE" "$LINENO" 5
- fi
- else
- input_to_shortpath="$new_path"
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
- new_path="$input_to_shortpath"
-
- input_path="$input_to_shortpath"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $input_to_shortpath | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$JTREGEXE"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- # Now try to locate executable using which
- new_path=`$WHICH "$new_path" 2> /dev/null`
-
- if test "x$new_path" = x; then
- # Oops. Which didn't find the executable.
- # The splitting of arguments from the executable at a space might have been incorrect,
- # since paths with space are more likely in Windows. Give it another try with the whole
- # argument.
- path="$complete"
- arguments="EOL"
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
-
- new_path=`$WHICH "$new_path" 2> /dev/null`
- # bat and cmd files are not always considered executable in MSYS causing which
- # to not find them
- if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
- new_path="$path"
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- fi
-
- if test "x$new_path" = x; then
- # It's still not found. Now this is an unrecoverable error.
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of JTREGEXE, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of JTREGEXE, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
-$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of JTREGEXE" "$LINENO" 5
- fi
- fi
-
- # Now new_path has a complete unix path to the binary
- if test "x`$ECHO $new_path | $GREP ^/bin/`" != x; then
- # Keep paths in /bin as-is, but remove trailing .exe if any
- new_path="${new_path/%.exe/}"
- # Do not save /bin paths to all_fixpath_prefixes!
- else
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $new_path`
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
- # Output is in $new_path
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- # remove trailing .exe if any
- new_path="${new_path/%.exe/}"
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
- fi
-
- else
- # We're on a unix platform. Hooray! :)
- # First separate the path from the arguments. This will split at the first
- # space.
- complete="$JTREGEXE"
- path="${complete%% *}"
- tmp="$complete EOL"
- arguments="${tmp#* }"
-
- # Cannot rely on the command "which" here since it doesn't always work.
- is_absolute_path=`$ECHO "$path" | $GREP ^/`
- if test -z "$is_absolute_path"; then
- # Path to executable is not absolute. Find it.
- IFS_save="$IFS"
- IFS=:
- for p in $PATH; do
- if test -f "$p/$path" && test -x "$p/$path"; then
- new_path="$p/$path"
- break
- fi
- done
- IFS="$IFS_save"
- else
- # This is an absolute path, we can use it without further modifications.
- new_path="$path"
- fi
-
- if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of JTREGEXE, which resolves as \"$complete\", is not found." >&5
-$as_echo "$as_me: The path of JTREGEXE, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
-$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of JTREGEXE" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
-
- if test "x$complete" != "x$new_complete"; then
- JTREGEXE="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting JTREGEXE to \"$new_complete\"" >&5
-$as_echo "$as_me: Rewriting JTREGEXE to \"$new_complete\"" >&6;}
- fi
- fi
-
-
- # Only process if variable expands to non-empty
-
- if test "x$JT_HOME" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- path="$JT_HOME"
- new_path=`$CYGPATH -u "$path"`
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file precense.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of JT_HOME, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of JT_HOME, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Cannot locate the the path of JT_HOME" "$LINENO" 5
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
-
- if test "x$path" != "x$new_path"; then
- JT_HOME="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting JT_HOME to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting JT_HOME to \"$new_path\"" >&6;}
- fi
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- path="$JT_HOME"
- has_colon=`$ECHO $path | $GREP ^.:`
- new_path="$path"
- if test "x$has_colon" = x; then
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $path`
- fi
-
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- if test "x$path" != "x$new_path"; then
- JT_HOME="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting JT_HOME to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting JT_HOME to \"$new_path\"" >&6;}
- fi
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
-
- else
- # We're on a unix platform. Hooray! :)
- path="$JT_HOME"
- has_space=`$ECHO "$path" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of JT_HOME, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of JT_HOME, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
- fi
-
- # Use eval to expand a potential ~
- eval path="$path"
- if test ! -f "$path" && test ! -d "$path"; then
- as_fn_error $? "The path of JT_HOME, which resolves as \"$path\", is not found." "$LINENO" 5
- fi
-
- if test -d "$path"; then
- JT_HOME="`cd "$path"; $THEPWDCMD -L`"
- else
- dir="`$DIRNAME "$path"`"
- base="`$BASENAME "$path"`"
- JT_HOME="`cd "$dir"; $THEPWDCMD -L`/$base"
- fi
- fi
- fi
-
-
-
-
-
-# Setup Jib dependency tool
-
-
-# Check whether --with-jib was given.
-if test "${with_jib+set}" = set; then :
- withval=$with_jib;
-fi
-
-
- if test "x$with_jib" = xno || test "x$with_jib" = x; then
- # jib disabled
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for jib" >&5
-$as_echo_n "checking for jib... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- elif test "x$with_jib" = xyes; then
- as_fn_error $? "Must supply a value to --with-jib" "$LINENO" 5
- else
- JIB_HOME="${with_jib}"
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for jib" >&5
-$as_echo_n "checking for jib... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${JIB_HOME}" >&5
-$as_echo "${JIB_HOME}" >&6; }
- if test ! -d "${JIB_HOME}"; then
- as_fn_error $? "--with-jib must be a directory" "$LINENO" 5
- fi
- JIB_JAR=$(ls ${JIB_HOME}/lib/jib-*.jar)
- if test ! -f "${JIB_JAR}"; then
- as_fn_error $? "Could not find jib jar file in ${JIB_HOME}" "$LINENO" 5
- fi
- fi
-
-
-
-
-
- # COMPILER_TARGET_BITS_FLAG : option for selecting 32- or 64-bit output
- # COMPILER_COMMAND_FILE_FLAG : option for passing a command file to the compiler
- # COMPILER_BINDCMD_FILE_FLAG : option for specifying a file which saves the binder
- # commands produced by the link step (currently AIX only)
- if test "x$TOOLCHAIN_TYPE" = xxlc; then
- COMPILER_TARGET_BITS_FLAG="-q"
- COMPILER_COMMAND_FILE_FLAG="-f"
- COMPILER_BINDCMD_FILE_FLAG="-bloadmap:"
- else
- COMPILER_TARGET_BITS_FLAG="-m"
- COMPILER_COMMAND_FILE_FLAG="@"
- COMPILER_BINDCMD_FILE_FLAG=""
-
- # The solstudio linker does not support @-files.
- if test "x$TOOLCHAIN_TYPE" = xsolstudio; then
- COMPILER_COMMAND_FILE_FLAG=
- fi
-
- # Check if @file is supported by gcc
- if test "x$TOOLCHAIN_TYPE" = xgcc; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if @file is supported by gcc" >&5
-$as_echo_n "checking if @file is supported by gcc... " >&6; }
- # Extra emtpy "" to prevent ECHO from interpreting '--version' as argument
- $ECHO "" "--version" > command.file
- if $CXX @command.file 2>&5 >&5; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
- COMPILER_COMMAND_FILE_FLAG="@"
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- COMPILER_COMMAND_FILE_FLAG=
- fi
- $RM command.file
- fi
- fi
-
-
-
-
- # FIXME: figure out if we should select AR flags depending on OS or toolchain.
- if test "x$OPENJDK_TARGET_OS" = xmacosx; then
- ARFLAGS="-r"
- elif test "x$OPENJDK_TARGET_OS" = xaix; then
- ARFLAGS="-X64"
- elif test "x$OPENJDK_TARGET_OS" = xwindows; then
- # lib.exe is used as AR to create static libraries.
- ARFLAGS="-nologo -NODEFAULTLIB:MSVCRT"
- else
- ARFLAGS=""
- fi
-
-
- ## Setup strip.
- # FIXME: should this really be per platform, or should it be per toolchain type?
- # strip is not provided by clang or solstudio; so guessing platform makes most sense.
- # FIXME: we should really only export STRIPFLAGS from here, not POST_STRIP_CMD.
- if test "x$OPENJDK_TARGET_OS" = xlinux; then
- STRIPFLAGS="-g"
- elif test "x$OPENJDK_TARGET_OS" = xsolaris; then
- STRIPFLAGS="-x"
- elif test "x$OPENJDK_TARGET_OS" = xmacosx; then
- STRIPFLAGS="-S"
- elif test "x$OPENJDK_TARGET_OS" = xaix; then
- STRIPFLAGS="-X32_64"
- fi
-
-
-
- if test "x$TOOLCHAIN_TYPE" = xmicrosoft; then
- CC_OUT_OPTION=-Fo
- EXE_OUT_OPTION=-out:
- LD_OUT_OPTION=-out:
- AR_OUT_OPTION=-out:
- else
- # The option used to specify the target .o,.a or .so file.
- # When compiling, how to specify the to be created object file.
- CC_OUT_OPTION='-o$(SPACE)'
- # When linking, how to specify the to be created executable.
- EXE_OUT_OPTION='-o$(SPACE)'
- # When linking, how to specify the to be created dynamically linkable library.
- LD_OUT_OPTION='-o$(SPACE)'
- # When archiving, how to specify the to be create static archive for object files.
- AR_OUT_OPTION='rcs$(SPACE)'
- fi
-
-
-
-
-
- # On Windows, we need to set RC flags.
- if test "x$TOOLCHAIN_TYPE" = xmicrosoft; then
- RC_FLAGS="-nologo -l0x409"
- JVM_RCFLAGS="-nologo"
- if test "x$DEBUG_LEVEL" = xrelease; then
- RC_FLAGS="$RC_FLAGS -DNDEBUG"
- JVM_RCFLAGS="$JVM_RCFLAGS -DNDEBUG"
- fi
-
- # The version variables used to create RC_FLAGS may be overridden
- # in a custom configure script, or possibly the command line.
- # Let those variables be expanded at make time in spec.gmk.
- # The \$ are escaped to the shell, and the $(...) variables
- # are evaluated by make.
- RC_FLAGS="$RC_FLAGS \
- -D\"JDK_VERSION_STRING=\$(VERSION_STRING)\" \
- -D\"JDK_COMPANY=\$(COMPANY_NAME)\" \
- -D\"JDK_COMPONENT=\$(PRODUCT_NAME) \$(JDK_RC_PLATFORM_NAME) binary\" \
- -D\"JDK_VER=\$(VERSION_NUMBER)\" \
- -D\"JDK_COPYRIGHT=Copyright \xA9 $COPYRIGHT_YEAR\" \
- -D\"JDK_NAME=\$(PRODUCT_NAME) \$(JDK_RC_PLATFORM_NAME) \$(VERSION_FEATURE)\" \
- -D\"JDK_FVER=\$(subst .,\$(COMMA),\$(VERSION_NUMBER_FOUR_POSITIONS))\""
-
- JVM_RCFLAGS="$JVM_RCFLAGS \
- -D\"HS_BUILD_ID=\$(VERSION_STRING)\" \
- -D\"HS_COMPANY=\$(COMPANY_NAME)\" \
- -D\"JDK_DOTVER=\$(VERSION_NUMBER_FOUR_POSITIONS)\" \
- -D\"HS_COPYRIGHT=Copyright $COPYRIGHT_YEAR\" \
- -D\"HS_NAME=\$(PRODUCT_NAME) \$(VERSION_SHORT)\" \
- -D\"JDK_VER=\$(subst .,\$(COMMA),\$(VERSION_NUMBER_FOUR_POSITIONS))\" \
- -D\"HS_FNAME=jvm.dll\" \
- -D\"HS_INTERNAL_NAME=jvm\""
- fi
-
-
-
- if test "x$TOOLCHAIN_TYPE" = xmicrosoft; then
- # silence copyright notice and other headers.
- COMMON_CCXXFLAGS="$COMMON_CCXXFLAGS -nologo"
- fi
-
-
-# Now we can test some aspects on the target using configure macros.
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
-$as_echo_n "checking for ANSI C header files... " >&6; }
-if ${ac_cv_header_stdc+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include
-#include
-#include
-#include
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_cxx_try_compile "$LINENO"; then :
- ac_cv_header_stdc=yes
-else
- ac_cv_header_stdc=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
-if test $ac_cv_header_stdc = yes; then
- # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "memchr" >/dev/null 2>&1; then :
-
-else
- ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
- # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "free" >/dev/null 2>&1; then :
-
-else
- ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
- # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
- if test "$cross_compiling" = yes; then :
- :
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include
-#include
-#if ((' ' & 0x0FF) == 0x020)
-# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
-# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
-#else
-# define ISLOWER(c) \
- (('a' <= (c) && (c) <= 'i') \
- || ('j' <= (c) && (c) <= 'r') \
- || ('s' <= (c) && (c) <= 'z'))
-# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
-#endif
-
-#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
-int
-main ()
-{
- int i;
- for (i = 0; i < 256; i++)
- if (XOR (islower (i), ISLOWER (i))
- || toupper (i) != TOUPPER (i))
- return 2;
- return 0;
-}
-_ACEOF
-if ac_fn_cxx_try_run "$LINENO"; then :
-
-else
- ac_cv_header_stdc=no
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
- conftest.$ac_objext conftest.beam conftest.$ac_ext
-fi
-
-fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
-$as_echo "$ac_cv_header_stdc" >&6; }
-if test $ac_cv_header_stdc = yes; then
-
-$as_echo "#define STDC_HEADERS 1" >>confdefs.h
-
-fi
-
-# On IRIX 5.3, sys/types and inttypes.h are conflicting.
-for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
- inttypes.h stdint.h unistd.h
-do :
- as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-ac_fn_cxx_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
-"
-if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
- cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
-
-
- ###############################################################################
- #
- # Now we check if libjvm.so will use 32 or 64 bit pointers for the C/C++ code.
- # (The JVM can use 32 or 64 bit Java pointers but that decision
- # is made at runtime.)
- #
-
- if test "x$OPENJDK_TARGET_OS" = xsolaris || test "x$OPENJDK_TARGET_OS" = xaix; then
- # Always specify -m flag on Solaris
- # And -q on AIX because otherwise the compiler produces 32-bit objects by default
-
- # When we add flags to the "official" CFLAGS etc, we need to
- # keep track of these additions in ADDED_CFLAGS etc. These
- # will later be checked to make sure only controlled additions
- # have been made to CFLAGS etc.
- ADDED_CFLAGS=" ${COMPILER_TARGET_BITS_FLAG}${OPENJDK_TARGET_CPU_BITS}"
- ADDED_CXXFLAGS=" ${COMPILER_TARGET_BITS_FLAG}${OPENJDK_TARGET_CPU_BITS}"
- ADDED_LDFLAGS=" ${COMPILER_TARGET_BITS_FLAG}${OPENJDK_TARGET_CPU_BITS}"
-
- CFLAGS="${CFLAGS}${ADDED_CFLAGS}"
- CXXFLAGS="${CXXFLAGS}${ADDED_CXXFLAGS}"
- LDFLAGS="${LDFLAGS}${ADDED_LDFLAGS}"
-
- CFLAGS_JDK="${CFLAGS_JDK}${ADDED_CFLAGS}"
- CXXFLAGS_JDK="${CXXFLAGS_JDK}${ADDED_CXXFLAGS}"
- LDFLAGS_JDK="${LDFLAGS_JDK}${ADDED_LDFLAGS}"
-
- JVM_CFLAGS="$JVM_CFLAGS $ADDED_CFLAGS"
- JVM_LDFLAGS="$JVM_LDFLAGS $ADDED_LDFLAGS"
- JVM_ASFLAGS="$JVM_ASFLAGS $ADDED_CFLAGS"
-
- elif test "x$COMPILE_TYPE" = xreduced; then
- if test "x$OPENJDK_TARGET_OS_TYPE" = xunix; then
- # Specify -m if running reduced on unix platforms
-
- # When we add flags to the "official" CFLAGS etc, we need to
- # keep track of these additions in ADDED_CFLAGS etc. These
- # will later be checked to make sure only controlled additions
- # have been made to CFLAGS etc.
- ADDED_CFLAGS=" ${COMPILER_TARGET_BITS_FLAG}${OPENJDK_TARGET_CPU_BITS}"
- ADDED_CXXFLAGS=" ${COMPILER_TARGET_BITS_FLAG}${OPENJDK_TARGET_CPU_BITS}"
- ADDED_LDFLAGS=" ${COMPILER_TARGET_BITS_FLAG}${OPENJDK_TARGET_CPU_BITS}"
-
- CFLAGS="${CFLAGS}${ADDED_CFLAGS}"
- CXXFLAGS="${CXXFLAGS}${ADDED_CXXFLAGS}"
- LDFLAGS="${LDFLAGS}${ADDED_LDFLAGS}"
-
- CFLAGS_JDK="${CFLAGS_JDK}${ADDED_CFLAGS}"
- CXXFLAGS_JDK="${CXXFLAGS_JDK}${ADDED_CXXFLAGS}"
- LDFLAGS_JDK="${LDFLAGS_JDK}${ADDED_LDFLAGS}"
-
- JVM_CFLAGS="$JVM_CFLAGS $ADDED_CFLAGS"
- JVM_LDFLAGS="$JVM_LDFLAGS $ADDED_LDFLAGS"
- JVM_ASFLAGS="$JVM_ASFLAGS $ADDED_CFLAGS"
-
- fi
- fi
- if test "x$OPENJDK_TARGET_OS" = xmacosx; then
- JVM_CFLAGS="$JVM_CFLAGS ${COMPILER_TARGET_BITS_FLAG}${OPENJDK_TARGET_CPU_BITS}"
- JVM_LDFLAGS="$JVM_LDFLAGS ${COMPILER_TARGET_BITS_FLAG}${OPENJDK_TARGET_CPU_BITS}"
- JVM_ASFLAGS="$JVM_ASFLAGS ${COMPILER_TARGET_BITS_FLAG}${OPENJDK_TARGET_CPU_BITS}"
- fi
-
- # Make compilation sanity check
- for ac_header in stdio.h
-do :
- ac_fn_cxx_check_header_mongrel "$LINENO" "stdio.h" "ac_cv_header_stdio_h" "$ac_includes_default"
-if test "x$ac_cv_header_stdio_h" = xyes; then :
- cat >>confdefs.h <<_ACEOF
-#define HAVE_STDIO_H 1
-_ACEOF
-
-else
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: Failed to compile stdio.h. This likely implies missing compile dependencies." >&5
-$as_echo "$as_me: Failed to compile stdio.h. This likely implies missing compile dependencies." >&6;}
- if test "x$COMPILE_TYPE" = xreduced; then
-
- # Print a helpful message on how to acquire the necessary build dependency.
- # reduced is the help tag: freetype, cups, alsa etc
- MISSING_DEPENDENCY=reduced
-
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- cygwin_help $MISSING_DEPENDENCY
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- msys_help $MISSING_DEPENDENCY
- else
- PKGHANDLER_COMMAND=
-
- case $PKGHANDLER in
- apt-get)
- apt_help $MISSING_DEPENDENCY ;;
- yum)
- yum_help $MISSING_DEPENDENCY ;;
- brew)
- brew_help $MISSING_DEPENDENCY ;;
- port)
- port_help $MISSING_DEPENDENCY ;;
- pkgutil)
- pkgutil_help $MISSING_DEPENDENCY ;;
- pkgadd)
- pkgadd_help $MISSING_DEPENDENCY ;;
- esac
-
- if test "x$PKGHANDLER_COMMAND" != x; then
- HELP_MSG="You might be able to fix this by running '$PKGHANDLER_COMMAND'."
- fi
- fi
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: You are doing a reduced build. Check that you have 32-bit libraries installed. $HELP_MSG" >&5
-$as_echo "$as_me: You are doing a reduced build. Check that you have 32-bit libraries installed. $HELP_MSG" >&6;}
- elif test "x$COMPILE_TYPE" = xcross; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You are doing a cross-compilation. Check that you have all target platform libraries installed." >&5
-$as_echo "$as_me: You are doing a cross-compilation. Check that you have all target platform libraries installed." >&6;}
- fi
- as_fn_error $? "Cannot continue." "$LINENO" 5
-
-fi
-
-done
-
-
- # The cast to long int works around a bug in the HP C Compiler
-# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
-# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
-# This bug is HP SR number 8606223364.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of int *" >&5
-$as_echo_n "checking size of int *... " >&6; }
-if ${ac_cv_sizeof_int_p+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if ac_fn_cxx_compute_int "$LINENO" "(long int) (sizeof (int *))" "ac_cv_sizeof_int_p" "$ac_includes_default"; then :
-
-else
- if test "$ac_cv_type_int_p" = yes; then
- { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error 77 "cannot compute sizeof (int *)
-See \`config.log' for more details" "$LINENO" 5; }
- else
- ac_cv_sizeof_int_p=0
- fi
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_int_p" >&5
-$as_echo "$ac_cv_sizeof_int_p" >&6; }
-
-
-
-cat >>confdefs.h <<_ACEOF
-#define SIZEOF_INT_P $ac_cv_sizeof_int_p
-_ACEOF
-
-
-
- # AC_CHECK_SIZEOF defines 'ac_cv_sizeof_int_p' to hold the number of bytes used by an 'int*'
- if test "x$ac_cv_sizeof_int_p" = x; then
- # The test failed, lets stick to the assumed value.
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: The number of bits in the target could not be determined, using $OPENJDK_TARGET_CPU_BITS." >&5
-$as_echo "$as_me: WARNING: The number of bits in the target could not be determined, using $OPENJDK_TARGET_CPU_BITS." >&2;}
- else
- TESTED_TARGET_CPU_BITS=`expr 8 \* $ac_cv_sizeof_int_p`
-
- if test "x$TESTED_TARGET_CPU_BITS" != "x$OPENJDK_TARGET_CPU_BITS"; then
- # This situation may happen on 64-bit platforms where the compiler by default only generates 32-bit objects
- # Let's try to implicitely set the compilers target architecture and retry the test
- { $as_echo "$as_me:${as_lineno-$LINENO}: The tested number of bits in the target ($TESTED_TARGET_CPU_BITS) differs from the number of bits expected to be found in the target ($OPENJDK_TARGET_CPU_BITS)." >&5
-$as_echo "$as_me: The tested number of bits in the target ($TESTED_TARGET_CPU_BITS) differs from the number of bits expected to be found in the target ($OPENJDK_TARGET_CPU_BITS)." >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: Retrying with platforms compiler target bits flag to ${COMPILER_TARGET_BITS_FLAG}${OPENJDK_TARGET_CPU_BITS}" >&5
-$as_echo "$as_me: Retrying with platforms compiler target bits flag to ${COMPILER_TARGET_BITS_FLAG}${OPENJDK_TARGET_CPU_BITS}" >&6;}
-
- # When we add flags to the "official" CFLAGS etc, we need to
- # keep track of these additions in ADDED_CFLAGS etc. These
- # will later be checked to make sure only controlled additions
- # have been made to CFLAGS etc.
- ADDED_CFLAGS=" ${COMPILER_TARGET_BITS_FLAG}${OPENJDK_TARGET_CPU_BITS}"
- ADDED_CXXFLAGS=" ${COMPILER_TARGET_BITS_FLAG}${OPENJDK_TARGET_CPU_BITS}"
- ADDED_LDFLAGS=" ${COMPILER_TARGET_BITS_FLAG}${OPENJDK_TARGET_CPU_BITS}"
-
- CFLAGS="${CFLAGS}${ADDED_CFLAGS}"
- CXXFLAGS="${CXXFLAGS}${ADDED_CXXFLAGS}"
- LDFLAGS="${LDFLAGS}${ADDED_LDFLAGS}"
-
- CFLAGS_JDK="${CFLAGS_JDK}${ADDED_CFLAGS}"
- CXXFLAGS_JDK="${CXXFLAGS_JDK}${ADDED_CXXFLAGS}"
- LDFLAGS_JDK="${LDFLAGS_JDK}${ADDED_LDFLAGS}"
-
- JVM_CFLAGS="$JVM_CFLAGS $ADDED_CFLAGS"
- JVM_LDFLAGS="$JVM_LDFLAGS $ADDED_LDFLAGS"
- JVM_ASFLAGS="$JVM_ASFLAGS $ADDED_CFLAGS"
-
-
- # We have to unset 'ac_cv_sizeof_int_p' first, otherwise AC_CHECK_SIZEOF will use the previously cached value!
- unset ac_cv_sizeof_int_p
- # And we have to undef the definition of SIZEOF_INT_P in confdefs.h by the previous invocation of AC_CHECK_SIZEOF
- cat >>confdefs.h <<_ACEOF
-#undef SIZEOF_INT_P
-_ACEOF
-
- # The cast to long int works around a bug in the HP C Compiler
-# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
-# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
-# This bug is HP SR number 8606223364.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of int *" >&5
-$as_echo_n "checking size of int *... " >&6; }
-if ${ac_cv_sizeof_int_p+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if ac_fn_cxx_compute_int "$LINENO" "(long int) (sizeof (int *))" "ac_cv_sizeof_int_p" "$ac_includes_default"; then :
-
-else
- if test "$ac_cv_type_int_p" = yes; then
- { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error 77 "cannot compute sizeof (int *)
-See \`config.log' for more details" "$LINENO" 5; }
- else
- ac_cv_sizeof_int_p=0
- fi
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_int_p" >&5
-$as_echo "$ac_cv_sizeof_int_p" >&6; }
-
-
-
-cat >>confdefs.h <<_ACEOF
-#define SIZEOF_INT_P $ac_cv_sizeof_int_p
-_ACEOF
-
-
-
- TESTED_TARGET_CPU_BITS=`expr 8 \* $ac_cv_sizeof_int_p`
-
- if test "x$TESTED_TARGET_CPU_BITS" != "x$OPENJDK_TARGET_CPU_BITS"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The tested number of bits in the target ($TESTED_TARGET_CPU_BITS) differs from the number of bits expected to be found in the target ($OPENJDK_TARGET_CPU_BITS)" >&5
-$as_echo "$as_me: The tested number of bits in the target ($TESTED_TARGET_CPU_BITS) differs from the number of bits expected to be found in the target ($OPENJDK_TARGET_CPU_BITS)" >&6;}
- if test "x$COMPILE_TYPE" = xreduced; then
-
- # Print a helpful message on how to acquire the necessary build dependency.
- # reduced is the help tag: freetype, cups, alsa etc
- MISSING_DEPENDENCY=reduced
-
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- cygwin_help $MISSING_DEPENDENCY
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- msys_help $MISSING_DEPENDENCY
- else
- PKGHANDLER_COMMAND=
-
- case $PKGHANDLER in
- apt-get)
- apt_help $MISSING_DEPENDENCY ;;
- yum)
- yum_help $MISSING_DEPENDENCY ;;
- brew)
- brew_help $MISSING_DEPENDENCY ;;
- port)
- port_help $MISSING_DEPENDENCY ;;
- pkgutil)
- pkgutil_help $MISSING_DEPENDENCY ;;
- pkgadd)
- pkgadd_help $MISSING_DEPENDENCY ;;
- esac
-
- if test "x$PKGHANDLER_COMMAND" != x; then
- HELP_MSG="You might be able to fix this by running '$PKGHANDLER_COMMAND'."
- fi
- fi
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: You are doing a reduced build. Check that you have 32-bit libraries installed. $HELP_MSG" >&5
-$as_echo "$as_me: You are doing a reduced build. Check that you have 32-bit libraries installed. $HELP_MSG" >&6;}
- elif test "x$COMPILE_TYPE" = xcross; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You are doing a cross-compilation. Check that you have all target platform libraries installed." >&5
-$as_echo "$as_me: You are doing a cross-compilation. Check that you have all target platform libraries installed." >&6;}
- fi
- as_fn_error $? "Cannot continue." "$LINENO" 5
- fi
- fi
- fi
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for target address size" >&5
-$as_echo_n "checking for target address size... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OPENJDK_TARGET_CPU_BITS bits" >&5
-$as_echo "$OPENJDK_TARGET_CPU_BITS bits" >&6; }
-
-
- ###############################################################################
- #
- # Is the target little of big endian?
- #
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether byte ordering is bigendian" >&5
-$as_echo_n "checking whether byte ordering is bigendian... " >&6; }
-if ${ac_cv_c_bigendian+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_cv_c_bigendian=unknown
- # See if we're dealing with a universal compiler.
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#ifndef __APPLE_CC__
- not a universal capable compiler
- #endif
- typedef int dummy;
-
-_ACEOF
-if ac_fn_cxx_try_compile "$LINENO"; then :
-
- # Check for potential -arch flags. It is not universal unless
- # there are at least two -arch flags with different values.
- ac_arch=
- ac_prev=
- for ac_word in $CC $CFLAGS $CPPFLAGS $LDFLAGS; do
- if test -n "$ac_prev"; then
- case $ac_word in
- i?86 | x86_64 | ppc | ppc64)
- if test -z "$ac_arch" || test "$ac_arch" = "$ac_word"; then
- ac_arch=$ac_word
- else
- ac_cv_c_bigendian=universal
- break
- fi
- ;;
- esac
- ac_prev=
- elif test "x$ac_word" = "x-arch"; then
- ac_prev=arch
- fi
- done
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- if test $ac_cv_c_bigendian = unknown; then
- # See if sys/param.h defines the BYTE_ORDER macro.
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include
- #include
-
-int
-main ()
-{
-#if ! (defined BYTE_ORDER && defined BIG_ENDIAN \
- && defined LITTLE_ENDIAN && BYTE_ORDER && BIG_ENDIAN \
- && LITTLE_ENDIAN)
- bogus endian macros
- #endif
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_cxx_try_compile "$LINENO"; then :
- # It does; now see whether it defined to BIG_ENDIAN or not.
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include
- #include
-
-int
-main ()
-{
-#if BYTE_ORDER != BIG_ENDIAN
- not big endian
- #endif
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_cxx_try_compile "$LINENO"; then :
- ac_cv_c_bigendian=yes
-else
- ac_cv_c_bigendian=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- fi
- if test $ac_cv_c_bigendian = unknown; then
- # See if defines _LITTLE_ENDIAN or _BIG_ENDIAN (e.g., Solaris).
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include
-
-int
-main ()
-{
-#if ! (defined _LITTLE_ENDIAN || defined _BIG_ENDIAN)
- bogus endian macros
- #endif
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_cxx_try_compile "$LINENO"; then :
- # It does; now see whether it defined to _BIG_ENDIAN or not.
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include
-
-int
-main ()
-{
-#ifndef _BIG_ENDIAN
- not big endian
- #endif
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_cxx_try_compile "$LINENO"; then :
- ac_cv_c_bigendian=yes
-else
- ac_cv_c_bigendian=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- fi
- if test $ac_cv_c_bigendian = unknown; then
- # Compile a test program.
- if test "$cross_compiling" = yes; then :
- # Try to guess by grepping values from an object file.
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-short int ascii_mm[] =
- { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 };
- short int ascii_ii[] =
- { 0x694C, 0x5454, 0x656C, 0x6E45, 0x6944, 0x6E61, 0 };
- int use_ascii (int i) {
- return ascii_mm[i] + ascii_ii[i];
- }
- short int ebcdic_ii[] =
- { 0x89D3, 0xE3E3, 0x8593, 0x95C5, 0x89C4, 0x9581, 0 };
- short int ebcdic_mm[] =
- { 0xC2C9, 0xC785, 0x95C4, 0x8981, 0x95E2, 0xA8E2, 0 };
- int use_ebcdic (int i) {
- return ebcdic_mm[i] + ebcdic_ii[i];
- }
- extern int foo;
-
-int
-main ()
-{
-return use_ascii (foo) == use_ebcdic (foo);
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_cxx_try_compile "$LINENO"; then :
- if grep BIGenDianSyS conftest.$ac_objext >/dev/null; then
- ac_cv_c_bigendian=yes
- fi
- if grep LiTTleEnDian conftest.$ac_objext >/dev/null ; then
- if test "$ac_cv_c_bigendian" = unknown; then
- ac_cv_c_bigendian=no
- else
- # finding both strings is unlikely to happen, but who knows?
- ac_cv_c_bigendian=unknown
- fi
- fi
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-$ac_includes_default
-int
-main ()
-{
-
- /* Are we little or big endian? From Harbison&Steele. */
- union
- {
- long int l;
- char c[sizeof (long int)];
- } u;
- u.l = 1;
- return u.c[sizeof (long int) - 1] == 1;
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_cxx_try_run "$LINENO"; then :
- ac_cv_c_bigendian=no
-else
- ac_cv_c_bigendian=yes
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
- conftest.$ac_objext conftest.beam conftest.$ac_ext
-fi
-
- fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_bigendian" >&5
-$as_echo "$ac_cv_c_bigendian" >&6; }
- case $ac_cv_c_bigendian in #(
- yes)
- ENDIAN="big";; #(
- no)
- ENDIAN="little" ;; #(
- universal)
- ENDIAN="universal_endianness"
- ;; #(
- *)
- ENDIAN="unknown" ;;
- esac
-
-
- if test "x$ENDIAN" = xuniversal_endianness; then
- as_fn_error $? "Building with both big and little endianness is not supported" "$LINENO" 5
- fi
- if test "x$ENDIAN" != "x$OPENJDK_TARGET_CPU_ENDIAN"; then
- as_fn_error $? "The tested endian in the target ($ENDIAN) differs from the endian expected to be found in the target ($OPENJDK_TARGET_CPU_ENDIAN)" "$LINENO" 5
- fi
-
-
-# Configure flags for the tools
-
- ###############################################################################
- #
- # How to compile shared libraries.
- #
-
- if test "x$TOOLCHAIN_TYPE" = xgcc; then
- PICFLAG="-fPIC"
- C_FLAG_REORDER=''
- CXX_FLAG_REORDER=''
-
- if test "x$OPENJDK_TARGET_OS" = xmacosx; then
- # Linking is different on MacOSX
- if test "x$STATIC_BUILD" = xtrue; then
- SHARED_LIBRARY_FLAGS ='-undefined dynamic_lookup'
- else
- SHARED_LIBRARY_FLAGS="-dynamiclib -compatibility_version 1.0.0 -current_version 1.0.0 $PICFLAG"
- JVM_CFLAGS="$JVM_CFLAGS $PICFLAG"
- fi
- SET_EXECUTABLE_ORIGIN='-Wl,-rpath,@loader_path$(or $1,/.)'
- SET_SHARED_LIBRARY_ORIGIN="$SET_EXECUTABLE_ORIGIN"
- SET_SHARED_LIBRARY_NAME='-Wl,-install_name,@rpath/$1'
- SET_SHARED_LIBRARY_MAPFILE='-Wl,-exported_symbols_list,$1'
- else
- # Default works for linux, might work on other platforms as well.
- SHARED_LIBRARY_FLAGS='-shared'
- SET_EXECUTABLE_ORIGIN='-Wl,-rpath,\$$ORIGIN$1'
- SET_SHARED_LIBRARY_ORIGIN="-Wl,-z,origin $SET_EXECUTABLE_ORIGIN"
- SET_SHARED_LIBRARY_NAME='-Wl,-soname=$1'
- SET_SHARED_LIBRARY_MAPFILE='-Wl,-version-script=$1'
- fi
- elif test "x$TOOLCHAIN_TYPE" = xclang; then
- C_FLAG_REORDER=''
- CXX_FLAG_REORDER=''
-
- if test "x$OPENJDK_TARGET_OS" = xmacosx; then
- # Linking is different on MacOSX
- PICFLAG=''
- SHARED_LIBRARY_FLAGS="-dynamiclib -compatibility_version 1.0.0 -current_version 1.0.0 $PICFLAG"
- SET_EXECUTABLE_ORIGIN='-Wl,-rpath,@loader_path$(or $1,/.)'
- SET_SHARED_LIBRARY_ORIGIN="$SET_EXECUTABLE_ORIGIN"
- SET_SHARED_LIBRARY_NAME='-Wl,-install_name,@rpath/$1'
- SET_SHARED_LIBRARY_MAPFILE='-Wl,-exported_symbols_list,$1'
-
- if test "x$STATIC_BUILD" = xfalse; then
- JVM_CFLAGS="$JVM_CFLAGS -fPIC"
- fi
- else
- # Default works for linux, might work on other platforms as well.
- PICFLAG='-fPIC'
- SHARED_LIBRARY_FLAGS='-shared'
- SET_EXECUTABLE_ORIGIN='-Wl,-rpath,\$$ORIGIN$1'
- SET_SHARED_LIBRARY_NAME='-Wl,-soname=$1'
- SET_SHARED_LIBRARY_MAPFILE='-Wl,-version-script=$1'
-
- # arm specific settings
- if test "x$OPENJDK_TARGET_CPU" = "xarm"; then
- # '-Wl,-z,origin' isn't used on arm.
- SET_SHARED_LIBRARY_ORIGIN='-Wl,-rpath,\$$$$ORIGIN$1'
- else
- SET_SHARED_LIBRARY_ORIGIN="-Wl,-z,origin $SET_EXECUTABLE_ORIGIN"
- fi
-
- fi
- elif test "x$TOOLCHAIN_TYPE" = xsolstudio; then
- if test "x$OPENJDK_TARGET_CPU" = xsparcv9; then
- PICFLAG="-xcode=pic32"
- else
- PICFLAG="-KPIC"
- fi
- C_FLAG_REORDER='-xF'
- CXX_FLAG_REORDER='-xF'
- SHARED_LIBRARY_FLAGS="-G"
- SET_EXECUTABLE_ORIGIN='-R\$$ORIGIN$1'
- SET_SHARED_LIBRARY_ORIGIN="$SET_EXECUTABLE_ORIGIN"
- SET_SHARED_LIBRARY_NAME='-h $1'
- SET_SHARED_LIBRARY_MAPFILE='-M$1'
- elif test "x$TOOLCHAIN_TYPE" = xxlc; then
- # '-qpic' defaults to 'qpic=small'. This means that the compiler generates only
- # one instruction for accessing the TOC. If the TOC grows larger than 64K, the linker
- # will have to patch this single instruction with a call to some out-of-order code which
- # does the load from the TOC. This is of course slow. But in that case we also would have
- # to use '-bbigtoc' for linking anyway so we could also change the PICFLAG to 'qpic=large'.
- # With 'qpic=large' the compiler will by default generate a two-instruction sequence which
- # can be patched directly by the linker and does not require a jump to out-of-order code.
- # Another alternative instead of using 'qpic=large -bbigtoc' may be to use '-qminimaltoc'
- # instead. This creates a distinct TOC for every compilation unit (and thus requires two
- # loads for accessing a global variable). But there are rumors that this may be seen as a
- # 'performance feature' because of improved code locality of the symbols used in a
- # compilation unit.
- PICFLAG="-qpic"
- JVM_CFLAGS="$JVM_CFLAGS $PICFLAG"
- C_FLAG_REORDER=''
- CXX_FLAG_REORDER=''
- SHARED_LIBRARY_FLAGS="-qmkshrobj -bM:SRE -bnoentry"
- SET_EXECUTABLE_ORIGIN=""
- SET_SHARED_LIBRARY_ORIGIN=''
- SET_SHARED_LIBRARY_NAME=''
- SET_SHARED_LIBRARY_MAPFILE=''
- elif test "x$TOOLCHAIN_TYPE" = xmicrosoft; then
- PICFLAG=""
- C_FLAG_REORDER=''
- CXX_FLAG_REORDER=''
- SHARED_LIBRARY_FLAGS="-dll"
- SET_EXECUTABLE_ORIGIN=''
- SET_SHARED_LIBRARY_ORIGIN=''
- SET_SHARED_LIBRARY_NAME=''
- SET_SHARED_LIBRARY_MAPFILE='-def:$1'
- fi
-
-
-
-
-
-
-
-
-
- # The (cross) compiler is now configured, we can now test capabilities
- # of the target platform.
-
-
-
- ###############################################################################
- #
- # Setup the opt flags for different compilers
- # and different operating systems.
- #
-
- # FIXME: this was indirectly the old default, but just inherited.
- # if test "x$TOOLCHAIN_TYPE" = xmicrosoft; then
- # C_FLAG_DEPS="-MMD -MF"
- # fi
-
- # Generate make dependency files
- if test "x$TOOLCHAIN_TYPE" = xgcc; then
- C_FLAG_DEPS="-MMD -MF"
- elif test "x$TOOLCHAIN_TYPE" = xclang; then
- C_FLAG_DEPS="-MMD -MF"
- elif test "x$TOOLCHAIN_TYPE" = xsolstudio; then
- C_FLAG_DEPS="-xMMD -xMF"
- elif test "x$TOOLCHAIN_TYPE" = xxlc; then
- C_FLAG_DEPS="-qmakedep=gcc -MF"
- fi
- CXX_FLAG_DEPS="$C_FLAG_DEPS"
-
-
-
- # Debug symbols
- if test "x$TOOLCHAIN_TYPE" = xgcc; then
- if test "x$OPENJDK_TARGET_CPU_BITS" = "x64" && test "x$DEBUG_LEVEL" = "xfastdebug"; then
- # reduce from default "-g2" option to save space
- CFLAGS_DEBUG_SYMBOLS="-g1"
- CXXFLAGS_DEBUG_SYMBOLS="-g1"
- else
- CFLAGS_DEBUG_SYMBOLS="-g"
- CXXFLAGS_DEBUG_SYMBOLS="-g"
- fi
- elif test "x$TOOLCHAIN_TYPE" = xclang; then
- CFLAGS_DEBUG_SYMBOLS="-g"
- CXXFLAGS_DEBUG_SYMBOLS="-g"
- elif test "x$TOOLCHAIN_TYPE" = xsolstudio; then
- CFLAGS_DEBUG_SYMBOLS="-g -xs"
- # -g0 enables debug symbols without disabling inlining.
- CXXFLAGS_DEBUG_SYMBOLS="-g0 -xs"
- elif test "x$TOOLCHAIN_TYPE" = xxlc; then
- CFLAGS_DEBUG_SYMBOLS="-g"
- CXXFLAGS_DEBUG_SYMBOLS="-g"
- elif test "x$TOOLCHAIN_TYPE" = xmicrosoft; then
- CFLAGS_DEBUG_SYMBOLS="-Zi"
- CXXFLAGS_DEBUG_SYMBOLS="-Zi"
- fi
-
-
-
- # Debug symbols for JVM_CFLAGS
- if test "x$TOOLCHAIN_TYPE" = xsolstudio; then
- JVM_CFLAGS_SYMBOLS="$JVM_CFLAGS_SYMBOLS -xs"
- if test "x$DEBUG_LEVEL" = xslowdebug; then
- JVM_CFLAGS_SYMBOLS="$JVM_CFLAGS_SYMBOLS -g"
- else
- # -g0 does not disable inlining, which -g does.
- JVM_CFLAGS_SYMBOLS="$JVM_CFLAGS_SYMBOLS -g0"
- fi
- elif test "x$TOOLCHAIN_TYPE" = xmicrosoft; then
- JVM_CFLAGS_SYMBOLS="$JVM_CFLAGS_SYMBOLS -Z7 -d2Zi+"
- else
- JVM_CFLAGS_SYMBOLS="$JVM_CFLAGS_SYMBOLS -g"
- fi
-
-
- # bounds, memory and behavior checking options
- if test "x$TOOLCHAIN_TYPE" = xgcc; then
- case $DEBUG_LEVEL in
- release )
- # no adjustment
- ;;
- fastdebug )
- # no adjustment
- ;;
- slowdebug )
- # FIXME: By adding this to C(XX)FLAGS_DEBUG_OPTIONS/JVM_CFLAGS_SYMBOLS it
- # get's added conditionally on whether we produce debug symbols or not.
- # This is most likely not really correct.
-
- # Add runtime stack smashing and undefined behavior checks.
- # Not all versions of gcc support -fstack-protector
- STACK_PROTECTOR_CFLAG="-fstack-protector-all"
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- # Execute function body
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- # Execute function body
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if the C compiler supports \"$STACK_PROTECTOR_CFLAG -Werror\"" >&5
-$as_echo_n "checking if the C compiler supports \"$STACK_PROTECTOR_CFLAG -Werror\"... " >&6; }
- supports=yes
-
- saved_cflags="$CFLAGS"
- CFLAGS="$CFLAGS $STACK_PROTECTOR_CFLAG -Werror"
- ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-int i;
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-
-else
- supports=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
- CFLAGS="$saved_cflags"
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $supports" >&5
-$as_echo "$supports" >&6; }
- if test "x$supports" = "xyes" ; then
- :
- C_COMP_SUPPORTS="yes"
- else
- :
- C_COMP_SUPPORTS="no"
- fi
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- # Execute function body
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if the C++ compiler supports \"$STACK_PROTECTOR_CFLAG -Werror\"" >&5
-$as_echo_n "checking if the C++ compiler supports \"$STACK_PROTECTOR_CFLAG -Werror\"... " >&6; }
- supports=yes
-
- saved_cxxflags="$CXXFLAGS"
- CXXFLAGS="$CXXFLAG $STACK_PROTECTOR_CFLAG -Werror"
- ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-int i;
-_ACEOF
-if ac_fn_cxx_try_compile "$LINENO"; then :
-
-else
- supports=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
- CXXFLAGS="$saved_cxxflags"
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $supports" >&5
-$as_echo "$supports" >&6; }
- if test "x$supports" = "xyes" ; then
- :
- CXX_COMP_SUPPORTS="yes"
- else
- :
- CXX_COMP_SUPPORTS="no"
- fi
-
-
-
-
-
-
-
-
-
-
-
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if both compilers support \"$STACK_PROTECTOR_CFLAG -Werror\"" >&5
-$as_echo_n "checking if both compilers support \"$STACK_PROTECTOR_CFLAG -Werror\"... " >&6; }
- supports=no
- if test "x$C_COMP_SUPPORTS" = "xyes" -a "x$CXX_COMP_SUPPORTS" = "xyes"; then supports=yes; fi
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $supports" >&5
-$as_echo "$supports" >&6; }
- if test "x$supports" = "xyes" ; then
- :
-
- else
- :
- STACK_PROTECTOR_CFLAG=""
- fi
-
-
-
-
-
-
-
- CFLAGS_DEBUG_OPTIONS="$STACK_PROTECTOR_CFLAG --param ssp-buffer-size=1"
- CXXFLAGS_DEBUG_OPTIONS="$STACK_PROTECTOR_CFLAG --param ssp-buffer-size=1"
- if test "x$STACK_PROTECTOR_CFLAG" != x; then
- JVM_CFLAGS_SYMBOLS="$JVM_CFLAGS_SYMBOLS $STACK_PROTECTOR_CFLAG --param ssp-buffer-size=1"
- fi
- ;;
- esac
- fi
-
- if test "x$TOOLCHAIN_TYPE" = xmicrosoft; then
- if test "x$DEBUG_LEVEL" != xrelease; then
- if test "x$OPENJDK_TARGET_CPU" = xx86_64; then
- JVM_CFLAGS="$JVM_CFLAGS -homeparams"
- fi
- fi
- fi
-
- # Optimization levels
- if test "x$TOOLCHAIN_TYPE" = xsolstudio; then
- CC_HIGHEST="$CC_HIGHEST -fns -fsimple -fsingle -xbuiltin=%all -xdepend -xrestrict -xlibmil"
-
- if test "x$OPENJDK_TARGET_CPU_ARCH" = "xx86"; then
- # FIXME: seems we always set -xregs=no%frameptr; put it elsewhere more global?
- C_O_FLAG_HIGHEST_JVM="-xO4"
- C_O_FLAG_HIGHEST="-xO4 -Wu,-O4~yz $CC_HIGHEST -xalias_level=basic -xregs=no%frameptr"
- C_O_FLAG_HI="-xO4 -Wu,-O4~yz -xregs=no%frameptr"
- C_O_FLAG_NORM="-xO2 -Wu,-O2~yz -xregs=no%frameptr"
- C_O_FLAG_DEBUG="-xregs=no%frameptr"
- C_O_FLAG_DEBUG_JVM=""
- C_O_FLAG_NONE="-xregs=no%frameptr"
- CXX_O_FLAG_HIGHEST_JVM="-xO4"
- CXX_O_FLAG_HIGHEST="-xO4 -Qoption ube -O4~yz $CC_HIGHEST -xregs=no%frameptr"
- CXX_O_FLAG_HI="-xO4 -Qoption ube -O4~yz -xregs=no%frameptr"
- CXX_O_FLAG_NORM="-xO2 -Qoption ube -O2~yz -xregs=no%frameptr"
- CXX_O_FLAG_DEBUG="-xregs=no%frameptr"
- CXX_O_FLAG_DEBUG_JVM=""
- CXX_O_FLAG_NONE="-xregs=no%frameptr"
- if test "x$OPENJDK_TARGET_CPU_BITS" = "x32"; then
- C_O_FLAG_HIGHEST="$C_O_FLAG_HIGHEST -xchip=pentium"
- CXX_O_FLAG_HIGHEST="$CXX_O_FLAG_HIGHEST -xchip=pentium"
- fi
- elif test "x$OPENJDK_TARGET_CPU_ARCH" = "xsparc"; then
- C_O_FLAG_HIGHEST_JVM="-xO4"
- C_O_FLAG_HIGHEST="-xO4 -Wc,-Qrm-s -Wc,-Qiselect-T0 $CC_HIGHEST -xalias_level=basic -xprefetch=auto,explicit -xchip=ultra"
- C_O_FLAG_HI="-xO4 -Wc,-Qrm-s -Wc,-Qiselect-T0"
- C_O_FLAG_NORM="-xO2 -Wc,-Qrm-s -Wc,-Qiselect-T0"
- C_O_FLAG_DEBUG=""
- C_O_FLAG_DEBUG_JVM=""
- C_O_FLAG_NONE=""
- CXX_O_FLAG_HIGHEST_JVM="-xO4"
- CXX_O_FLAG_HIGHEST="-xO4 -Qoption cg -Qrm-s -Qoption cg -Qiselect-T0 $CC_HIGHEST -xprefetch=auto,explicit -xchip=ultra"
- CXX_O_FLAG_HI="-xO4 -Qoption cg -Qrm-s -Qoption cg -Qiselect-T0"
- CXX_O_FLAG_NORM="-xO2 -Qoption cg -Qrm-s -Qoption cg -Qiselect-T0"
- CXX_O_FLAG_DEBUG=""
- CXX_O_FLAG_DEBUG_JVM=""
- CXX_O_FLAG_NONE=""
- fi
- else
- # The remaining toolchains share opt flags between CC and CXX;
- # setup for C and duplicate afterwards.
- if test "x$TOOLCHAIN_TYPE" = xgcc; then
- if test "x$OPENJDK_TARGET_OS" = xmacosx; then
- # On MacOSX we optimize for size, something
- # we should do for all platforms?
- C_O_FLAG_HIGHEST_JVM="-Os"
- C_O_FLAG_HIGHEST="-Os"
- C_O_FLAG_HI="-Os"
- C_O_FLAG_NORM="-Os"
- C_O_FLAG_SIZE="-Os"
- else
- C_O_FLAG_HIGHEST_JVM="-O3"
- C_O_FLAG_HIGHEST="-O3"
- C_O_FLAG_HI="-O3"
- C_O_FLAG_NORM="-O2"
- C_O_FLAG_SIZE="-Os"
- fi
- C_O_FLAG_DEBUG="-O0"
- if test "x$OPENJDK_TARGET_OS" = xmacosx; then
- C_O_FLAG_DEBUG_JVM=""
- elif test "x$OPENJDK_TARGET_OS" = xlinux; then
- C_O_FLAG_DEBUG_JVM="-O0"
- fi
- C_O_FLAG_NONE="-O0"
- elif test "x$TOOLCHAIN_TYPE" = xclang; then
- if test "x$OPENJDK_TARGET_OS" = xmacosx; then
- # On MacOSX we optimize for size, something
- # we should do for all platforms?
- C_O_FLAG_HIGHEST_JVM="-Os"
- C_O_FLAG_HIGHEST="-Os"
- C_O_FLAG_HI="-Os"
- C_O_FLAG_NORM="-Os"
- C_O_FLAG_SIZE="-Os"
- else
- C_O_FLAG_HIGHEST_JVM="-O3"
- C_O_FLAG_HIGHEST="-O3"
- C_O_FLAG_HI="-O3"
- C_O_FLAG_NORM="-O2"
- C_O_FLAG_SIZE="-Os"
- fi
- C_O_FLAG_DEBUG="-O0"
- if test "x$OPENJDK_TARGET_OS" = xmacosx; then
- C_O_FLAG_DEBUG_JVM=""
- elif test "x$OPENJDK_TARGET_OS" = xlinux; then
- C_O_FLAG_DEBUG_JVM="-O0"
- fi
- C_O_FLAG_NONE="-O0"
- elif test "x$TOOLCHAIN_TYPE" = xxlc; then
- C_O_FLAG_HIGHEST_JVM="-O3 -qhot=level=1 -qinline -qinlglue"
- C_O_FLAG_HIGHEST="-O3 -qhot=level=1 -qinline -qinlglue"
- C_O_FLAG_HI="-O3 -qinline -qinlglue"
- C_O_FLAG_NORM="-O2"
- C_O_FLAG_DEBUG="-qnoopt"
- # FIXME: Value below not verified.
- C_O_FLAG_DEBUG_JVM=""
- C_O_FLAG_NONE="-qnoopt"
- elif test "x$TOOLCHAIN_TYPE" = xmicrosoft; then
- C_O_FLAG_HIGHEST_JVM="-O2 -Oy-"
- C_O_FLAG_HIGHEST="-O2"
- C_O_FLAG_HI="-O1"
- C_O_FLAG_NORM="-O1"
- C_O_FLAG_DEBUG="-Od"
- C_O_FLAG_DEBUG_JVM=""
- C_O_FLAG_NONE="-Od"
- C_O_FLAG_SIZE="-Os"
- fi
- CXX_O_FLAG_HIGHEST_JVM="$C_O_FLAG_HIGHEST_JVM"
- CXX_O_FLAG_HIGHEST="$C_O_FLAG_HIGHEST"
- CXX_O_FLAG_HI="$C_O_FLAG_HI"
- CXX_O_FLAG_NORM="$C_O_FLAG_NORM"
- CXX_O_FLAG_DEBUG="$C_O_FLAG_DEBUG"
- CXX_O_FLAG_DEBUG_JVM="$C_O_FLAG_DEBUG_JVM"
- CXX_O_FLAG_NONE="$C_O_FLAG_NONE"
- CXX_O_FLAG_SIZE="$C_O_FLAG_SIZE"
- fi
-
- # Adjust optimization flags according to debug level.
- case $DEBUG_LEVEL in
- release )
- # no adjustment
- ;;
- fastdebug )
- # Not quite so much optimization
- C_O_FLAG_HI="$C_O_FLAG_NORM"
- CXX_O_FLAG_HI="$CXX_O_FLAG_NORM"
- ;;
- slowdebug )
- # Disable optimization
- C_O_FLAG_HIGHEST_JVM="$C_O_FLAG_DEBUG_JVM"
- C_O_FLAG_HIGHEST="$C_O_FLAG_DEBUG"
- C_O_FLAG_HI="$C_O_FLAG_DEBUG"
- C_O_FLAG_NORM="$C_O_FLAG_DEBUG"
- C_O_FLAG_SIZE="$C_O_FLAG_DEBUG"
- CXX_O_FLAG_HIGHEST_JVM="$CXX_O_FLAG_DEBUG_JVM"
- CXX_O_FLAG_HIGHEST="$CXX_O_FLAG_DEBUG"
- CXX_O_FLAG_HI="$CXX_O_FLAG_DEBUG"
- CXX_O_FLAG_NORM="$CXX_O_FLAG_DEBUG"
- CXX_O_FLAG_SIZE="$CXX_O_FLAG_DEBUG"
- ;;
- esac
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-# Check whether --with-abi-profile was given.
-if test "${with_abi_profile+set}" = set; then :
- withval=$with_abi_profile;
-fi
-
-
- if test "x$with_abi_profile" != x; then
- if test "x$OPENJDK_TARGET_CPU" != xarm && \
- test "x$OPENJDK_TARGET_CPU" != xaarch64; then
- as_fn_error $? "--with-abi-profile only available on arm/aarch64" "$LINENO" 5
- fi
-
- OPENJDK_TARGET_ABI_PROFILE=$with_abi_profile
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ABI profle" >&5
-$as_echo_n "checking for ABI profle... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OPENJDK_TARGET_ABI_PROFILE" >&5
-$as_echo "$OPENJDK_TARGET_ABI_PROFILE" >&6; }
-
- if test "x$OPENJDK_TARGET_ABI_PROFILE" = xarm-vfp-sflt; then
- ARM_FLOAT_TYPE=vfp-sflt
- ARM_ARCH_TYPE_FLAGS='-march=armv7-a -mthumb'
- elif test "x$OPENJDK_TARGET_ABI_PROFILE" = xarm-vfp-hflt; then
- ARM_FLOAT_TYPE=vfp-hflt
- ARM_ARCH_TYPE_FLAGS='-march=armv7-a -mthumb'
- elif test "x$OPENJDK_TARGET_ABI_PROFILE" = xarm-sflt; then
- ARM_FLOAT_TYPE=sflt
- ARM_ARCH_TYPE_FLAGS='-march=armv5t -marm'
- elif test "x$OPENJDK_TARGET_ABI_PROFILE" = xarmv5-vfp-sflt; then
- ARM_FLOAT_TYPE=vfp-sflt
- ARM_ARCH_TYPE_FLAGS='-march=armv5t -marm'
- elif test "x$OPENJDK_TARGET_ABI_PROFILE" = xarmv6-vfp-hflt; then
- ARM_FLOAT_TYPE=vfp-hflt
- ARM_ARCH_TYPE_FLAGS='-march=armv6 -marm'
- elif test "x$OPENJDK_TARGET_ABI_PROFILE" = xarm64; then
- # No special flags, just need to trigger setting JDK_ARCH_ABI_PROP_NAME
- ARM_FLOAT_TYPE=
- ARM_ARCH_TYPE_FLAGS=
- elif test "x$OPENJDK_TARGET_ABI_PROFILE" = xaarch64; then
- # No special flags, just need to trigger setting JDK_ARCH_ABI_PROP_NAME
- ARM_FLOAT_TYPE=
- ARM_ARCH_TYPE_FLAGS=
- else
- as_fn_error $? "Invalid ABI profile: \"$OPENJDK_TARGET_ABI_PROFILE\"" "$LINENO" 5
- fi
-
- if test "x$ARM_FLOAT_TYPE" = xvfp-sflt; then
- ARM_FLOAT_TYPE_FLAGS='-mfloat-abi=softfp -mfpu=vfp -DFLOAT_ARCH=-vfp-sflt'
- elif test "x$ARM_FLOAT_TYPE" = xvfp-hflt; then
- ARM_FLOAT_TYPE_FLAGS='-mfloat-abi=hard -mfpu=vfp -DFLOAT_ARCH=-vfp-hflt'
- elif test "x$ARM_FLOAT_TYPE" = xsflt; then
- ARM_FLOAT_TYPE_FLAGS='-msoft-float -mfpu=vfp'
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ARM_FLOAT_TYPE floating point flags" >&5
-$as_echo_n "checking for $ARM_FLOAT_TYPE floating point flags... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ARM_FLOAT_TYPE_FLAGS" >&5
-$as_echo "$ARM_FLOAT_TYPE_FLAGS" >&6; }
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for arch type flags" >&5
-$as_echo_n "checking for arch type flags... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ARM_ARCH_TYPE_FLAGS" >&5
-$as_echo "$ARM_ARCH_TYPE_FLAGS" >&6; }
-
- # Now set JDK_ARCH_ABI_PROP_NAME. This is equivalent to the last part of the
- # autoconf target triplet.
- JDK_ARCH_ABI_PROP_NAME=`$ECHO $OPENJDK_TARGET_AUTOCONF_NAME | $SED -e 's/.*-\([^-]*\)$/\1/'`
- # Sanity check that it is a known ABI.
- if test "x$JDK_ARCH_ABI_PROP_NAME" != xgnu && \
- test "x$JDK_ARCH_ABI_PROP_NAME" != xgnueabi && \
- test "x$JDK_ARCH_ABI_PROP_NAME" != xgnueabihf; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unknown autoconf target triplet ABI: \"$JDK_ARCH_ABI_PROP_NAME\"" >&5
-$as_echo "$as_me: WARNING: Unknown autoconf target triplet ABI: \"$JDK_ARCH_ABI_PROP_NAME\"" >&2;}
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ABI property name" >&5
-$as_echo_n "checking for ABI property name... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $JDK_ARCH_ABI_PROP_NAME" >&5
-$as_echo "$JDK_ARCH_ABI_PROP_NAME" >&6; }
-
-
- # Pass these on to the open part of configure as if they were set using
- # --with-extra-c[xx]flags.
- EXTRA_CFLAGS="$EXTRA_CFLAGS $ARM_ARCH_TYPE_FLAGS $ARM_FLOAT_TYPE_FLAGS"
- EXTRA_CXXFLAGS="$EXTRA_CXXFLAGS $ARM_ARCH_TYPE_FLAGS $ARM_FLOAT_TYPE_FLAGS"
- # Get rid of annoying "note: the mangling of 'va_list' has changed in GCC 4.4"
- # FIXME: This should not really be set using extra_cflags.
- if test "x$OPENJDK_TARGET_CPU" = xarm; then
- EXTRA_CFLAGS="$EXTRA_CFLAGS -Wno-psabi"
- EXTRA_CXXFLAGS="$EXTRA_CXXFLAGS -Wno-psabi"
- fi
- # Also add JDK_ARCH_ABI_PROP_NAME define, but only to CFLAGS.
- EXTRA_CFLAGS="$EXTRA_CFLAGS -DJDK_ARCH_ABI_PROP_NAME='\"\$(JDK_ARCH_ABI_PROP_NAME)\"'"
- # And pass the architecture flags to the linker as well
- EXTRA_LDFLAGS="$EXTRA_LDFLAGS $ARM_ARCH_TYPE_FLAGS $ARM_FLOAT_TYPE_FLAGS"
- fi
-
- # When building with an abi profile, the name of that profile is appended on the
- # bundle platform, which is used in bundle names.
- if test "x$OPENJDK_TARGET_ABI_PROFILE" != x; then
- OPENJDK_TARGET_BUNDLE_PLATFORM="$OPENJDK_TARGET_OS_BUNDLE-$OPENJDK_TARGET_ABI_PROFILE"
- fi
-
-
- # Optional POSIX functionality needed by the JVM
- #
- # Check if clock_gettime is available and in which library. This indicates
- # availability of CLOCK_MONOTONIC for hotspot. But we don't need to link, so
- # don't let it update LIBS.
- save_LIBS="$LIBS"
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing clock_gettime" >&5
-$as_echo_n "checking for library containing clock_gettime... " >&6; }
-if ${ac_cv_search_clock_gettime+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_func_search_save_LIBS=$LIBS
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char clock_gettime ();
-int
-main ()
-{
-return clock_gettime ();
- ;
- return 0;
-}
-_ACEOF
-for ac_lib in '' rt; do
- if test -z "$ac_lib"; then
- ac_res="none required"
- else
- ac_res=-l$ac_lib
- LIBS="-l$ac_lib $ac_func_search_save_LIBS"
- fi
- if ac_fn_cxx_try_link "$LINENO"; then :
- ac_cv_search_clock_gettime=$ac_res
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext
- if ${ac_cv_search_clock_gettime+:} false; then :
- break
-fi
-done
-if ${ac_cv_search_clock_gettime+:} false; then :
-
-else
- ac_cv_search_clock_gettime=no
-fi
-rm conftest.$ac_ext
-LIBS=$ac_func_search_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_clock_gettime" >&5
-$as_echo "$ac_cv_search_clock_gettime" >&6; }
-ac_res=$ac_cv_search_clock_gettime
-if test "$ac_res" != no; then :
- test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
- HAS_CLOCK_GETTIME=true
-fi
-
- if test "x$LIBS" = "x-lrt "; then
- CLOCK_GETTIME_IN_LIBRT=true
- fi
- LIBS="$save_LIBS"
-
-
- # Special extras...
- if test "x$TOOLCHAIN_TYPE" = xsolstudio; then
- if test "x$OPENJDK_TARGET_CPU_ARCH" = "xsparc"; then
- CFLAGS_JDKLIB_EXTRA="${CFLAGS_JDKLIB_EXTRA} -xregs=no%appl"
- CXXFLAGS_JDKLIB_EXTRA="${CXXFLAGS_JDKLIB_EXTRA} -xregs=no%appl"
- fi
- CFLAGS_JDKLIB_EXTRA="${CFLAGS_JDKLIB_EXTRA} -errtags=yes -errfmt"
- CXXFLAGS_JDKLIB_EXTRA="${CXXFLAGS_JDKLIB_EXTRA} -errtags=yes -errfmt"
- elif test "x$TOOLCHAIN_TYPE" = xxlc; then
- CFLAGS_JDK="${CFLAGS_JDK} -qchars=signed -qfullpath -qsaveopt"
- CXXFLAGS_JDK="${CXXFLAGS_JDK} -qchars=signed -qfullpath -qsaveopt"
- elif test "x$TOOLCHAIN_TYPE" = xgcc; then
- CXXSTD_CXXFLAG="-std=gnu++98"
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- # Execute function body
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if the C++ compiler supports \"$CXXSTD_CXXFLAG -Werror\"" >&5
-$as_echo_n "checking if the C++ compiler supports \"$CXXSTD_CXXFLAG -Werror\"... " >&6; }
- supports=yes
-
- saved_cxxflags="$CXXFLAGS"
- CXXFLAGS="$CXXFLAG $CXXSTD_CXXFLAG -Werror"
- ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-int i;
-_ACEOF
-if ac_fn_cxx_try_compile "$LINENO"; then :
-
-else
- supports=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
- CXXFLAGS="$saved_cxxflags"
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $supports" >&5
-$as_echo "$supports" >&6; }
- if test "x$supports" = "xyes" ; then
- :
-
- else
- :
- CXXSTD_CXXFLAG=""
- fi
-
-
-
-
-
-
-
-
-
-
-
-
- CXXFLAGS_JDK="${CXXFLAGS_JDK} ${CXXSTD_CXXFLAG}"
- JVM_CFLAGS="${JVM_CFLAGS} ${CXXSTD_CXXFLAG}"
-
- fi
- if test "x$OPENJDK_TARGET_OS" = xsolaris; then
- CFLAGS_JDK="${CFLAGS_JDK} -D__solaris__"
- CXXFLAGS_JDK="${CXXFLAGS_JDK} -D__solaris__"
- fi
-
- CFLAGS_JDK="${CFLAGS_JDK} ${EXTRA_CFLAGS}"
- CXXFLAGS_JDK="${CXXFLAGS_JDK} ${EXTRA_CXXFLAGS}"
- LDFLAGS_JDK="${LDFLAGS_JDK} ${EXTRA_LDFLAGS}"
-
- ###############################################################################
- #
- # Now setup the CFLAGS and LDFLAGS for the JDK build.
- # Later we will also have CFLAGS and LDFLAGS for the hotspot subrepo build.
- #
-
- # Setup compiler/platform specific flags into
- # CFLAGS_JDK - C Compiler flags
- # CXXFLAGS_JDK - C++ Compiler flags
- # COMMON_CCXXFLAGS_JDK - common to C and C++
- if test "x$TOOLCHAIN_TYPE" = xgcc; then
- JVM_CFLAGS="$JVM_CFLAGS -D_GNU_SOURCE"
- JVM_CFLAGS="$JVM_CFLAGS -D_REENTRANT"
- JVM_CFLAGS="$JVM_CFLAGS -fcheck-new"
- if test "x$OPENJDK_TARGET_CPU" = xx86; then
- # Force compatibility with i586 on 32 bit intel platforms.
- COMMON_CCXXFLAGS="${COMMON_CCXXFLAGS} -march=i586"
- JVM_CFLAGS="$JVM_CFLAGS -march=i586"
- fi
- COMMON_CCXXFLAGS_JDK="$COMMON_CCXXFLAGS $COMMON_CCXXFLAGS_JDK -Wall -Wextra -Wno-unused -Wno-unused-parameter -Wformat=2 \
- -pipe -D_GNU_SOURCE -D_REENTRANT -D_LARGEFILE64_SOURCE"
- case $OPENJDK_TARGET_CPU_ARCH in
- arm )
- # on arm we don't prevent gcc to omit frame pointer but do prevent strict aliasing
- CFLAGS_JDK="${CFLAGS_JDK} -fno-strict-aliasing"
- COMMON_CCXXFLAGS_JDK="${COMMON_CCXXFLAGS_JDK} -fsigned-char"
- ;;
- ppc )
- # on ppc we don't prevent gcc to omit frame pointer but do prevent strict aliasing
- CFLAGS_JDK="${CFLAGS_JDK} -fno-strict-aliasing"
- ;;
- s390 )
- COMMON_CCXXFLAGS_JDK="$COMMON_CCXXFLAGS_JDK -fno-omit-frame-pointer -mbackchain -march=z10"
- CFLAGS_JDK="${CFLAGS_JDK} -fno-strict-aliasing"
- ;;
- * )
- COMMON_CCXXFLAGS_JDK="$COMMON_CCXXFLAGS_JDK -fno-omit-frame-pointer"
- CFLAGS_JDK="${CFLAGS_JDK} -fno-strict-aliasing"
- ;;
- esac
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- # Execute function body
-
- # Need to assign to a variable since m4 is blocked from modifying parts in [].
- REFERENCE_VERSION=6
-
- if [[ "$REFERENCE_VERSION" =~ (.*\.){4} ]] ; then
- as_fn_error $? "Internal error: Cannot compare to 6, only four parts (W.X.Y.Z) is supported" "$LINENO" 5
- fi
-
- if [[ "$REFERENCE_VERSION" =~ [0-9]{6} ]] ; then
- as_fn_error $? "Internal error: Cannot compare to 6, only parts < 99999 is supported" "$LINENO" 5
- fi
-
- # Version comparison method inspired by http://stackoverflow.com/a/24067243
- COMPARABLE_REFERENCE_VERSION=`$AWK -F. '{ printf("%05d%05d%05d%05d\n", $1, $2, $3, $4) }' <<< "$REFERENCE_VERSION"`
-
- if test $COMPARABLE_ACTUAL_VERSION -ge $COMPARABLE_REFERENCE_VERSION ; then
- :
-
- # These flags are required for GCC 6 builds as undefined behaviour in OpenJDK code
- # runs afoul of the more aggressive versions of these optimisations.
- # Notably, value range propagation now assumes that the this pointer of C++
- # member functions is non-null.
- NO_DELETE_NULL_POINTER_CHECKS_CFLAG="-fno-delete-null-pointer-checks"
- NO_LIFETIME_DSE_CFLAG="-fno-lifetime-dse"
- { $as_echo "$as_me:${as_lineno-$LINENO}: GCC >= 6 detected; adding ${NO_DELETE_NULL_POINTER_CHECKS_CFLAG} and ${NO_LIFETIME_DSE_CFLAG}" >&5
-$as_echo "$as_me: GCC >= 6 detected; adding ${NO_DELETE_NULL_POINTER_CHECKS_CFLAG} and ${NO_LIFETIME_DSE_CFLAG}" >&6;}
- CFLAGS_JDK="$CFLAGS_JDK ${NO_DELETE_NULL_POINTER_CHECKS_CFLAG} ${NO_LIFETIME_DSE_CFLAG}"
- JVM_CFLAGS="$JVM_CFLAGS ${NO_DELETE_NULL_POINTER_CHECKS_CFLAG} ${NO_LIFETIME_DSE_CFLAG}"
-
- else
- :
-
- fi
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- elif test "x$TOOLCHAIN_TYPE" = xclang; then
- JVM_CFLAGS="$JVM_CFLAGS -D_GNU_SOURCE"
-
- # Restrict the debug information created by Clang to avoid
- # too big object files and speed the build up a little bit
- # (see http://llvm.org/bugs/show_bug.cgi?id=7554)
- JVM_CFLAGS="$JVM_CFLAGS -flimit-debug-info"
- if test "x$OPENJDK_TARGET_OS" = xlinux; then
- if test "x$OPENJDK_TARGET_CPU" = xx86; then
- # Force compatibility with i586 on 32 bit intel platforms.
- COMMON_CCXXFLAGS="${COMMON_CCXXFLAGS} -march=i586"
- JVM_CFLAGS="$JVM_CFLAGS -march=i586"
- fi
- JVM_CFLAGS="$JVM_CFLAGS -Wno-sometimes-uninitialized"
- COMMON_CCXXFLAGS_JDK="$COMMON_CCXXFLAGS $COMMON_CCXXFLAGS_JDK -Wall -Wextra -Wno-unused -Wno-unused-parameter -Wformat=2 \
- -pipe -D_GNU_SOURCE -D_REENTRANT -D_LARGEFILE64_SOURCE"
- case $OPENJDK_TARGET_CPU_ARCH in
- ppc )
- # on ppc we don't prevent gcc to omit frame pointer but do prevent strict aliasing
- CFLAGS_JDK="${CFLAGS_JDK} -fno-strict-aliasing"
- ;;
- * )
- COMMON_CCXXFLAGS_JDK="$COMMON_CCXXFLAGS_JDK -fno-omit-frame-pointer"
- CFLAGS_JDK="${CFLAGS_JDK} -fno-strict-aliasing"
- ;;
- esac
- fi
- elif test "x$TOOLCHAIN_TYPE" = xsolstudio; then
- JVM_CFLAGS="$JVM_CFLAGS -DSPARC_WORKS"
- COMMON_CCXXFLAGS_JDK="$COMMON_CCXXFLAGS $COMMON_CCXXFLAGS_JDK -DTRACING -DMACRO_MEMSYS_OPS -DBREAKPTS"
- if test "x$OPENJDK_TARGET_CPU_ARCH" = xx86; then
- COMMON_CCXXFLAGS_JDK="$COMMON_CCXXFLAGS_JDK -DcpuIntel -Di586 -D$OPENJDK_TARGET_CPU_LEGACY_LIB"
- fi
-
- CFLAGS_JDK="$CFLAGS_JDK -xc99=%none -xCC -errshort=tags -Xa -v -mt -W0,-noglobal"
- CXXFLAGS_JDK="$CXXFLAGS_JDK -errtags=yes +w -mt -features=no%except -DCC_NOEX -norunpath -xnolib"
- elif test "x$TOOLCHAIN_TYPE" = xxlc; then
- JVM_CFLAGS="$JVM_CFLAGS -D_REENTRANT"
- CFLAGS_JDK="$CFLAGS_JDK -D_GNU_SOURCE -D_REENTRANT -D_LARGEFILE64_SOURCE -DSTDC"
- CXXFLAGS_JDK="$CXXFLAGS_JDK -D_GNU_SOURCE -D_REENTRANT -D_LARGEFILE64_SOURCE -DSTDC"
- elif test "x$TOOLCHAIN_TYPE" = xmicrosoft; then
- COMMON_CCXXFLAGS_JDK="$COMMON_CCXXFLAGS $COMMON_CCXXFLAGS_JDK \
- -MD -Zc:wchar_t- -W3 -wd4800 \
- -DWIN32_LEAN_AND_MEAN \
- -D_CRT_SECURE_NO_DEPRECATE -D_CRT_NONSTDC_NO_DEPRECATE \
- -D_WINSOCK_DEPRECATED_NO_WARNINGS \
- -DWIN32 -DIAL"
- if test "x$OPENJDK_TARGET_CPU" = xx86_64; then
- COMMON_CCXXFLAGS_JDK="$COMMON_CCXXFLAGS_JDK -D_AMD64_ -Damd64"
- else
- COMMON_CCXXFLAGS_JDK="$COMMON_CCXXFLAGS_JDK -D_X86_ -Dx86"
- fi
- # If building with Visual Studio 2010, we can still use _STATIC_CPPLIB to
- # avoid bundling msvcpNNN.dll. Doesn't work with newer versions of visual
- # studio.
- if test "x$TOOLCHAIN_VERSION" = "x2010"; then
- STATIC_CPPLIB_FLAGS="-D_STATIC_CPPLIB -D_DISABLE_DEPRECATE_STATIC_CPPLIB"
- COMMON_CCXXFLAGS_JDK="$COMMON_CCXXFLAGS_JDK $STATIC_CPPLIB_FLAGS"
- JVM_CFLAGS="$JVM_CFLAGS $STATIC_CPPLIB_FLAGS"
- fi
- fi
-
- ###############################################################################
-
- # Adjust flags according to debug level.
- case $DEBUG_LEVEL in
- fastdebug | slowdebug )
- CFLAGS_JDK="$CFLAGS_JDK $CFLAGS_DEBUG_SYMBOLS $CFLAGS_DEBUG_OPTIONS"
- CXXFLAGS_JDK="$CXXFLAGS_JDK $CXXFLAGS_DEBUG_SYMBOLS $CXXFLAGS_DEBUG_OPTIONS"
- ;;
- release )
- ;;
- * )
- as_fn_error $? "Unrecognized \$DEBUG_LEVEL: $DEBUG_LEVEL" "$LINENO" 5
- ;;
- esac
-
- # Set some common defines. These works for all compilers, but assume
- # -D is universally accepted.
-
- # Setup endianness
- if test "x$OPENJDK_TARGET_CPU_ENDIAN" = xlittle; then
- # The macro _LITTLE_ENDIAN needs to be defined the same to avoid the
- # Sun C compiler warning message: warning: macro redefined: _LITTLE_ENDIAN
- # (The Solaris X86 system defines this in file /usr/include/sys/isa_defs.h).
- # Note: -Dmacro is the same as #define macro 1
- # -Dmacro= is the same as #define macro
- if test "x$OPENJDK_TARGET_OS" = xsolaris; then
- COMMON_CCXXFLAGS_JDK="$COMMON_CCXXFLAGS_JDK -D_LITTLE_ENDIAN="
- else
- COMMON_CCXXFLAGS_JDK="$COMMON_CCXXFLAGS_JDK -D_LITTLE_ENDIAN"
- fi
- else
- # Same goes for _BIG_ENDIAN. Do we really need to set *ENDIAN on Solaris if they
- # are defined in the system?
- if test "x$OPENJDK_TARGET_OS" = xsolaris; then
- COMMON_CCXXFLAGS_JDK="$COMMON_CCXXFLAGS_JDK -D_BIG_ENDIAN="
- else
- COMMON_CCXXFLAGS_JDK="$COMMON_CCXXFLAGS_JDK -D_BIG_ENDIAN"
- fi
- fi
-
- # Always enable optional macros for VM.
- JVM_CFLAGS="$JVM_CFLAGS -D__STDC_FORMAT_MACROS"
- JVM_CFLAGS="$JVM_CFLAGS -D__STDC_LIMIT_MACROS"
- JVM_CFLAGS="$JVM_CFLAGS -D__STDC_CONSTANT_MACROS"
-
- # Setup target OS define. Use OS target name but in upper case.
- OPENJDK_TARGET_OS_UPPERCASE=`$ECHO $OPENJDK_TARGET_OS | $TR 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
- COMMON_CCXXFLAGS_JDK="$COMMON_CCXXFLAGS_JDK -D$OPENJDK_TARGET_OS_UPPERCASE"
-
- # Setup target CPU
- COMMON_CCXXFLAGS_JDK="$COMMON_CCXXFLAGS_JDK \
- $OPENJDK_TARGET_ADD_LP64 \
- -DARCH='\"$OPENJDK_TARGET_CPU_LEGACY\"' -D$OPENJDK_TARGET_CPU_LEGACY"
-
- # Setup debug/release defines
- if test "x$DEBUG_LEVEL" = xrelease; then
- COMMON_CCXXFLAGS_JDK="$COMMON_CCXXFLAGS_JDK -DNDEBUG"
- if test "x$OPENJDK_TARGET_OS" = xsolaris; then
- COMMON_CCXXFLAGS_JDK="$COMMON_CCXXFLAGS_JDK -DTRIMMED"
- fi
- else
- COMMON_CCXXFLAGS_JDK="$COMMON_CCXXFLAGS_JDK -DDEBUG"
- fi
-
- # Optional POSIX functionality needed by the VM
-
- if test "x$HAS_CLOCK_GETTIME" = "xtrue"; then
- JVM_CFLAGS="$JVM_CFLAGS -DSUPPORTS_CLOCK_MONOTONIC"
- if test "x$CLOCK_GETTIME_IN_LIBRT" = "xtrue"; then
- JVM_CFLAGS="$JVM_CFLAGS -DNEEDS_LIBRT"
- fi
- fi
-
-
- # Set some additional per-OS defines.
- if test "x$OPENJDK_TARGET_OS" = xlinux; then
- JVM_CFLAGS="$JVM_CFLAGS -DLINUX"
- JVM_CFLAGS="$JVM_CFLAGS -pipe $PICFLAG -fno-rtti -fno-exceptions \
- -fvisibility=hidden -fno-strict-aliasing -fno-omit-frame-pointer"
- elif test "x$OPENJDK_TARGET_OS" = xsolaris; then
- JVM_CFLAGS="$JVM_CFLAGS -DSOLARIS"
- JVM_CFLAGS="$JVM_CFLAGS -template=no%extdef -features=no%split_init \
- -D_Crun_inline_placement -library=stlport4 $PICFLAG -mt -features=no%except"
- elif test "x$OPENJDK_TARGET_OS" = xmacosx; then
- COMMON_CCXXFLAGS_JDK="$COMMON_CCXXFLAGS_JDK -D_ALLBSD_SOURCE -D_DARWIN_UNLIMITED_SELECT"
- JVM_CFLAGS="$JVM_CFLAGS -D_ALLBSD_SOURCE"
- JVM_CFLAGS="$JVM_CFLAGS -D_DARWIN_C_SOURCE -D_XOPEN_SOURCE"
- JVM_CFLAGS="$JVM_CFLAGS -fno-rtti -fno-exceptions -fvisibility=hidden \
- -mno-omit-leaf-frame-pointer -mstack-alignment=16 -pipe -fno-strict-aliasing \
- -fno-omit-frame-pointer"
- elif test "x$OPENJDK_TARGET_OS" = xaix; then
- JVM_CFLAGS="$JVM_CFLAGS -DAIX"
- JVM_CFLAGS="$JVM_CFLAGS -qtune=balanced \
- -qalias=noansi -qstrict -qtls=default -qlanglvl=c99vla \
- -qlanglvl=noredefmac -qnortti -qnoeh -qignerrno"
- # We need '-qminimaltoc' or '-qpic=large -bbigtoc' if the TOC overflows.
- # Hotspot now overflows its 64K TOC (currently only for slowdebug),
- # so for slowdebug we build with '-qpic=large -bbigtoc'.
- if test "x$DEBUG_LEVEL" = xslowdebug; then
- JVM_CFLAGS="$JVM_CFLAGS -qpic=large"
- fi
- elif test "x$OPENJDK_TARGET_OS" = xbsd; then
- COMMON_CCXXFLAGS_JDK="$COMMON_CCXXFLAGS_JDK -D_ALLBSD_SOURCE"
- elif test "x$OPENJDK_TARGET_OS" = xwindows; then
- JVM_CFLAGS="$JVM_CFLAGS -D_WINDOWS -DWIN32 -D_JNI_IMPLEMENTATION_"
- JVM_CFLAGS="$JVM_CFLAGS -nologo -W3 -MD -MP"
- fi
-
- # Set some additional per-CPU defines.
- if test "x$OPENJDK_TARGET_OS-$OPENJDK_TARGET_CPU" = xwindows-x86; then
- JVM_CFLAGS="$JVM_CFLAGS -arch:IA32"
- elif test "x$OPENJDK_TARGET_OS-$OPENJDK_TARGET_CPU" = xsolaris-sparcv9; then
- JVM_CFLAGS="$JVM_CFLAGS -xarch=sparc"
- elif test "x$OPENJDK_TARGET_CPU" = xppc64; then
- if test "x$OPENJDK_TARGET_OS" = xlinux; then
- JVM_CFLAGS="$JVM_CFLAGS -minsert-sched-nops=regroup_exact -mno-multiple -mno-string"
- # fixes `relocation truncated to fit' error for gcc 4.1.
- JVM_CFLAGS="$JVM_CFLAGS -mminimal-toc"
- # Use ppc64 instructions, but schedule for power5
- JVM_CFLAGS="$JVM_CFLAGS -mcpu=powerpc64 -mtune=power5"
- elif test "x$OPENJDK_TARGET_OS" = xaix; then
- JVM_CFLAGS="$JVM_CFLAGS -qarch=ppc64"
- fi
- elif test "x$OPENJDK_TARGET_CPU" = xppc64le; then
- if test "x$OPENJDK_TARGET_OS" = xlinux; then
- JVM_CFLAGS="$JVM_CFLAGS -minsert-sched-nops=regroup_exact -mno-multiple -mno-string"
- # Little endian machine uses ELFv2 ABI.
- JVM_CFLAGS="$JVM_CFLAGS -DABI_ELFv2"
- # Use Power8, this is the first CPU to support PPC64 LE with ELFv2 ABI.
- JVM_CFLAGS="$JVM_CFLAGS -mcpu=power8 -mtune=power8"
- fi
- elif test "x$OPENJDK_TARGET_CPU" = xs390x; then
- if test "x$OPENJDK_TARGET_OS" = xlinux; then
- JVM_CFLAGS="$JVM_CFLAGS -mbackchain -march=z10"
- fi
- fi
-
- if test "x$OPENJDK_TARGET_CPU_ENDIAN" = xlittle; then
- JVM_CFLAGS="$JVM_CFLAGS -DVM_LITTLE_ENDIAN"
- fi
-
- if test "x$OPENJDK_TARGET_CPU_BITS" = x64; then
- if test "x$OPENJDK_TARGET_OS" != xsolaris && test "x$OPENJDK_TARGET_OS" != xaix; then
- # Solaris does not have _LP64=1 in the old build.
- # xlc on AIX defines _LP64=1 by default and issues a warning if we redefine it.
- JVM_CFLAGS="$JVM_CFLAGS -D_LP64=1"
- fi
- fi
-
- # Set JVM_CFLAGS warning handling
- if test "x$OPENJDK_TARGET_OS" = xlinux; then
- JVM_CFLAGS="$JVM_CFLAGS -Wpointer-arith -Wsign-compare -Wunused-function \
- -Wunused-value -Woverloaded-virtual"
-
- if test "x$TOOLCHAIN_TYPE" = xgcc; then
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- # Execute function body
-
- # Need to assign to a variable since m4 is blocked from modifying parts in [].
- REFERENCE_VERSION=4.8
-
- if [[ "$REFERENCE_VERSION" =~ (.*\.){4} ]] ; then
- as_fn_error $? "Internal error: Cannot compare to 4.8, only four parts (W.X.Y.Z) is supported" "$LINENO" 5
- fi
-
- if [[ "$REFERENCE_VERSION" =~ [0-9]{6} ]] ; then
- as_fn_error $? "Internal error: Cannot compare to 4.8, only parts < 99999 is supported" "$LINENO" 5
- fi
-
- # Version comparison method inspired by http://stackoverflow.com/a/24067243
- COMPARABLE_REFERENCE_VERSION=`$AWK -F. '{ printf("%05d%05d%05d%05d\n", $1, $2, $3, $4) }' <<< "$REFERENCE_VERSION"`
-
- if test $COMPARABLE_ACTUAL_VERSION -ge $COMPARABLE_REFERENCE_VERSION ; then
- :
-
- # These flags either do not work or give spurious warnings prior to gcc 4.8.
- JVM_CFLAGS="$JVM_CFLAGS -Wno-format-zero-length -Wtype-limits -Wuninitialized"
-
-
- else
- :
-
- fi
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- fi
- if ! [[ " $JVM_VARIANTS " =~ " zero " ]] ; then
- # Non-zero builds have stricter warnings
- JVM_CFLAGS="$JVM_CFLAGS -Wreturn-type -Wundef -Wformat=2"
- else
- if test "x$TOOLCHAIN_TYPE" = xclang; then
- # Some versions of llvm do not like -Wundef
- JVM_CFLAGS="$JVM_CFLAGS -Wno-undef"
- fi
- fi
- elif test "x$OPENJDK_TARGET_OS" = xmacosx; then
- JVM_CFLAGS="$JVM_CFLAGS -Wno-deprecated -Wpointer-arith \
- -Wsign-compare -Wundef -Wunused-function -Wformat=2"
- fi
-
- # Additional macosx handling
- if test "x$OPENJDK_TARGET_OS" = xmacosx; then
- # MACOSX_VERSION_MIN is the c++ and ld is -mmacosx-version-min argument. The expected
- # format is X.Y.Z. It's hard-coded to the minimum OSX version on which the
- # JDK can be built and makes the linked binaries compatible even if built on
- # a newer version of the OS.
- MACOSX_VERSION_MIN=10.7.0
-
-
- # Setting --with-macosx-version-max= makes it an error to build or
- # link to macosx APIs that are newer than the given OS version. The expected
- # format for is either nn.n.n or nn.nn.nn. See /usr/include/AvailabilityMacros.h.
-
-# Check whether --with-macosx-version-max was given.
-if test "${with_macosx_version_max+set}" = set; then :
- withval=$with_macosx_version_max;
- if echo "$with_macosx_version_max" | $GREP -q "^[0-9][0-9]\.[0-9]\.[0-9]\$"; then
- MACOSX_VERSION_MAX=$with_macosx_version_max
- elif echo "$with_macosx_version_max" | $GREP -q "^[0-9][0-9]\.[0-9][0-9]\.[0-9][0-9]\$"; then
- MACOSX_VERSION_MAX=$with_macosx_version_max
- elif test "x$with_macosx_version_max" = "xno"; then
- # Use build system default
- MACOSX_VERSION_MAX=
- else
- as_fn_error $? "osx version format must be nn.n.n or nn.nn.nn" "$LINENO" 5
- fi
-
-else
- MACOSX_VERSION_MAX=
-
-fi
-
-
-
- # Let the flags variables get resolved in make for easier override on make
- # command line. AvailabilityMacros.h versions have no dots, ex: 1070.
- COMMON_CCXXFLAGS_JDK="$COMMON_CCXXFLAGS_JDK \
- -DMAC_OS_X_VERSION_MIN_REQUIRED=\$(subst .,,\$(MACOSX_VERSION_MIN)) \
- -mmacosx-version-min=\$(MACOSX_VERSION_MIN)"
- LDFLAGS_JDK="$LDFLAGS_JDK -mmacosx-version-min=\$(MACOSX_VERSION_MIN)"
- JVM_CFLAGS="$JVM_CFLAGS \
- -DMAC_OS_X_VERSION_MIN_REQUIRED=\$(subst .,,\$(MACOSX_VERSION_MIN)) \
- -mmacosx-version-min=\$(MACOSX_VERSION_MIN)"
-
- if test -n "$MACOSX_VERSION_MAX"; then
- COMMON_CCXXFLAGS_JDK="$COMMON_CCXXFLAGS_JDK \
- -DMAC_OS_X_VERSION_MAX_ALLOWED=\$(subst .,,\$(MACOSX_VERSION_MAX))"
- JVM_CFLAGS="$JVM_CFLAGS \
- -DMAC_OS_X_VERSION_MAX_ALLOWED=\$(subst .,,\$(MACOSX_VERSION_MAX))"
- fi
- fi
-
- # Setup some hard coded includes
- COMMON_CCXXFLAGS_JDK="$COMMON_CCXXFLAGS_JDK \
- -I\$(SUPPORT_OUTPUTDIR)/modules_include/java.base \
- -I\$(SUPPORT_OUTPUTDIR)/modules_include/java.base/\$(OPENJDK_TARGET_OS_INCLUDE_SUBDIR) \
- -I${TOPDIR}/src/java.base/share/native/libjava \
- -I${TOPDIR}/src/java.base/$OPENJDK_TARGET_OS_TYPE/native/libjava \
- -I${TOPDIR}/src/hotspot/share/include \
- -I${TOPDIR}/src/hotspot/os/${HOTSPOT_TARGET_OS_TYPE}/include"
-
- # The shared libraries are compiled using the picflag.
- CFLAGS_JDKLIB="$COMMON_CCXXFLAGS_JDK \
- $CFLAGS_JDK $EXTRA_CFLAGS_JDK $PICFLAG $CFLAGS_JDKLIB_EXTRA"
- CXXFLAGS_JDKLIB="$COMMON_CCXXFLAGS_JDK \
- $CXXFLAGS_JDK $EXTRA_CXXFLAGS_JDK $PICFLAG $CXXFLAGS_JDKLIB_EXTRA"
-
- # Executable flags
- CFLAGS_JDKEXE="$COMMON_CCXXFLAGS_JDK $CFLAGS_JDK $EXTRA_CFLAGS_JDK"
- CXXFLAGS_JDKEXE="$COMMON_CCXXFLAGS_JDK $CXXFLAGS_JDK $EXTRA_CXXFLAGS_JDK"
-
-
-
-
-
-
- # Setup LDFLAGS et al.
- #
-
- if test "x$TOOLCHAIN_TYPE" = xmicrosoft; then
- LDFLAGS_MICROSOFT="-nologo -opt:ref"
- LDFLAGS_JDK="$LDFLAGS_JDK $LDFLAGS_MICROSOFT -incremental:no"
- JVM_LDFLAGS="$JVM_LDFLAGS $LDFLAGS_MICROSOFT -opt:icf,8 -subsystem:windows -base:0x8000000"
- if test "x$OPENJDK_TARGET_CPU_BITS" = "x32"; then
- LDFLAGS_SAFESH="-safeseh"
- LDFLAGS_JDK="$LDFLAGS_JDK $LDFLAGS_SAFESH"
- JVM_LDFLAGS="$JVM_LDFLAGS $LDFLAGS_SAFESH"
- # NOTE: Old build added -machine. Probably not needed.
- JVM_LDFLAGS="$JVM_LDFLAGS -machine:I386"
- else
- JVM_LDFLAGS="$JVM_LDFLAGS -machine:AMD64"
- fi
- elif test "x$TOOLCHAIN_TYPE" = xclang; then
- JVM_LDFLAGS="$JVM_LDFLAGS -mno-omit-leaf-frame-pointer -mstack-alignment=16 -stdlib=libstdc++ -fPIC"
- if test "x$OPENJDK_TARGET_OS" = xmacosx; then
- # FIXME: We should really generalize SET_SHARED_LIBRARY_ORIGIN instead.
- JVM_LDFLAGS="$JVM_LDFLAGS -Wl,-rpath,@loader_path/. -Wl,-rpath,@loader_path/.."
- fi
- elif test "x$TOOLCHAIN_TYPE" = xgcc; then
- # If this is a --hash-style=gnu system, use --hash-style=both, why?
- # We have previously set HAS_GNU_HASH if this is the case
- if test -n "$HAS_GNU_HASH"; then
- LDFLAGS_HASH_STYLE="-Wl,--hash-style=both"
- LDFLAGS_JDK="${LDFLAGS_JDK} $LDFLAGS_HASH_STYLE"
- JVM_LDFLAGS="$JVM_LDFLAGS $LDFLAGS_HASH_STYLE"
- fi
- if test "x$OPENJDK_TARGET_OS" = xmacosx; then
- JVM_LDFLAGS="$JVM_LDFLAGS -Wl,-rpath,@loader_path/. -Wl,-rpath,@loader_path/.."
- fi
- if test "x$OPENJDK_TARGET_OS" = xlinux; then
- # And since we now know that the linker is gnu, then add -z defs, to forbid
- # undefined symbols in object files.
- LDFLAGS_NO_UNDEF_SYM="-Wl,-z,defs"
- LDFLAGS_JDK="${LDFLAGS_JDK} $LDFLAGS_NO_UNDEF_SYM"
- JVM_LDFLAGS="$JVM_LDFLAGS $LDFLAGS_NO_UNDEF_SYM"
- LDFLAGS_NO_EXEC_STACK="-Wl,-z,noexecstack"
- JVM_LDFLAGS="$JVM_LDFLAGS $LDFLAGS_NO_EXEC_STACK"
- if test "x$OPENJDK_TARGET_CPU" = xx86; then
- JVM_LDFLAGS="$JVM_LDFLAGS -march=i586"
- fi
- case $DEBUG_LEVEL in
- release )
- # tell linker to optimize libraries.
- # Should this be supplied to the OSS linker as well?
- LDFLAGS_DEBUGLEVEL_release="-Wl,-O1"
- LDFLAGS_JDK="${LDFLAGS_JDK} $LDFLAGS_DEBUGLEVEL_release"
- JVM_LDFLAGS="$JVM_LDFLAGS $LDFLAGS_DEBUGLEVEL_release"
- if test "x$HAS_LINKER_RELRO" = "xtrue"; then
- JVM_LDFLAGS="$JVM_LDFLAGS $LINKER_RELRO_FLAG"
- fi
- ;;
- slowdebug )
- # Hotspot always let the linker optimize
- JVM_LDFLAGS="$JVM_LDFLAGS -Wl,-O1"
- if test "x$HAS_LINKER_NOW" = "xtrue"; then
- # do relocations at load
- LDFLAGS_JDK="$LDFLAGS_JDK $LINKER_NOW_FLAG"
- LDFLAGS_CXX_JDK="$LDFLAGS_CXX_JDK $LINKER_NOW_FLAG"
- JVM_LDFLAGS="$JVM_LDFLAGS $LINKER_NOW_FLAG"
- fi
- if test "x$HAS_LINKER_RELRO" = "xtrue"; then
- # mark relocations read only
- LDFLAGS_JDK="$LDFLAGS_JDK $LINKER_RELRO_FLAG"
- LDFLAGS_CXX_JDK="$LDFLAGS_CXX_JDK $LINKER_RELRO_FLAG"
- JVM_LDFLAGS="$JVM_LDFLAGS $LINKER_RELRO_FLAG"
- fi
- ;;
- fastdebug )
- # Hotspot always let the linker optimize
- JVM_LDFLAGS="$JVM_LDFLAGS -Wl,-O1"
- if test "x$HAS_LINKER_RELRO" = "xtrue"; then
- # mark relocations read only
- LDFLAGS_JDK="$LDFLAGS_JDK $LINKER_RELRO_FLAG"
- LDFLAGS_CXX_JDK="$LDFLAGS_CXX_JDK $LINKER_RELRO_FLAG"
- JVM_LDFLAGS="$JVM_LDFLAGS $LINKER_RELRO_FLAG"
- fi
- ;;
- * )
- as_fn_error $? "Unrecognized \$DEBUG_LEVEL: $DEBUG_LEVEL" "$LINENO" 5
- ;;
- esac
- fi
- elif test "x$TOOLCHAIN_TYPE" = xsolstudio; then
- LDFLAGS_SOLSTUDIO="-Wl,-z,defs"
- LDFLAGS_JDK="$LDFLAGS_JDK $LDFLAGS_SOLSTUDIO -ztext"
- LDFLAGS_CXX_SOLSTUDIO="-norunpath"
- LDFLAGS_CXX_JDK="$LDFLAGS_CXX_JDK $LDFLAGS_CXX_SOLSTUDIO -xnolib"
- JVM_LDFLAGS="$JVM_LDFLAGS $LDFLAGS_SOLSTUDIO -library=%none -mt $LDFLAGS_CXX_SOLSTUDIO -z noversion"
- if test "x$OPENJDK_TARGET_CPU_ARCH" = "xsparc"; then
- JVM_LDFLAGS="$JVM_LDFLAGS -xarch=sparc"
- fi
- elif test "x$TOOLCHAIN_TYPE" = xxlc; then
- LDFLAGS_XLC="-b64 -brtl -bnolibpath -bexpall -bernotok -btextpsize:64K -bdatapsize:64K -bstackpsize:64K"
- LDFLAGS_JDK="${LDFLAGS_JDK} $LDFLAGS_XLC"
- JVM_LDFLAGS="$JVM_LDFLAGS $LDFLAGS_XLC"
- # We need '-qminimaltoc' or '-qpic=large -bbigtoc' if the TOC overflows.
- # Hotspot now overflows its 64K TOC (currently only for slowdebug),
- # so for slowdebug we build with '-qpic=large -bbigtoc'.
- if test "x$DEBUG_LEVEL" = xslowdebug; then
- JVM_LDFLAGS="$JVM_LDFLAGS -bbigtoc"
- fi
- fi
-
- # Customize LDFLAGS for executables
-
- LDFLAGS_JDKEXE="${LDFLAGS_JDK}"
-
- if test "x$TOOLCHAIN_TYPE" = xmicrosoft; then
- if test "x$OPENJDK_TARGET_CPU_BITS" = "x64"; then
- LDFLAGS_STACK_SIZE=1048576
- else
- LDFLAGS_STACK_SIZE=327680
- fi
- LDFLAGS_JDKEXE="${LDFLAGS_JDKEXE} /STACK:$LDFLAGS_STACK_SIZE"
- elif test "x$OPENJDK_TARGET_OS" = xlinux; then
- LDFLAGS_JDKEXE="$LDFLAGS_JDKEXE -Wl,--allow-shlib-undefined"
- fi
-
- LDFLAGS_JDKEXE="${LDFLAGS_JDKEXE} ${EXTRA_LDFLAGS_JDK}"
-
- # Customize LDFLAGS for libs
- LDFLAGS_JDKLIB="${LDFLAGS_JDK}"
-
- LDFLAGS_JDKLIB="${LDFLAGS_JDKLIB} ${SHARED_LIBRARY_FLAGS}"
- LDFLAGS_JDKLIB="${LDFLAGS_JDKLIB} ${LDFLAGS_NO_EXEC_STACK}"
- if test "x$TOOLCHAIN_TYPE" = xmicrosoft; then
- JAVA_BASE_LDFLAGS="${JAVA_BASE_LDFLAGS} \
- -libpath:${OUTPUTDIR}/support/modules_libs/java.base"
- JDKLIB_LIBS=""
- else
- JAVA_BASE_LDFLAGS="${JAVA_BASE_LDFLAGS} \
- -L\$(SUPPORT_OUTPUTDIR)/modules_libs/java.base"
-
- if test "xTARGET" = "xTARGET"; then
- # On some platforms (mac) the linker warns about non existing -L dirs.
- # For any of the variants server, client or minimal, the dir matches the
- # variant name. The "main" variant should be used for linking. For the
- # rest, the dir is just server.
- if [[ " $JVM_VARIANTS " =~ " server " ]] || [[ " $JVM_VARIANTS " =~ " client " ]] \
- || [[ " $JVM_VARIANTS " =~ " minimal " ]] ; then
- JAVA_BASE_LDFLAGS="${JAVA_BASE_LDFLAGS} \
- -L\$(SUPPORT_OUTPUTDIR)/modules_libs/java.base/$JVM_VARIANT_MAIN"
- else
- JAVA_BASE_LDFLAGS="${JAVA_BASE_LDFLAGS} \
- -L\$(SUPPORT_OUTPUTDIR)/modules_libs/java.base/server"
- fi
- elif test "xTARGET" = "xBUILD"; then
- # When building a buildjdk, it's always only the server variant
- JAVA_BASE_LDFLAGS="${JAVA_BASE_LDFLAGS} \
- -L\$(SUPPORT_OUTPUTDIR)/modules_libs/java.base/server"
- fi
-
- JDKLIB_LIBS="-ljava -ljvm"
- if test "x$TOOLCHAIN_TYPE" = xsolstudio; then
- JDKLIB_LIBS="$JDKLIB_LIBS -lc"
- fi
-
- fi
-
-LDFLAGS_JDKLIB="${LDFLAGS_JDKLIB} ${JAVA_BASE_LDFLAGS}"
-
- # Set JVM_LIBS (per os)
- if test "x$OPENJDK_TARGET_OS" = xlinux; then
- JVM_LIBS="$JVM_LIBS -lm -ldl -lpthread"
- elif test "x$OPENJDK_TARGET_OS" = xsolaris; then
- # FIXME: This hard-coded path is not really proper.
- if test "x$OPENJDK_TARGET_CPU" = xx86_64; then
- SOLARIS_LIBM_LIBS="/usr/lib/amd64/libm.so.1"
- elif test "x$OPENJDK_TARGET_CPU" = xsparcv9; then
- SOLARIS_LIBM_LIBS="/usr/lib/sparcv9/libm.so.1"
- fi
- JVM_LIBS="$JVM_LIBS -lsocket -lsched -ldl $SOLARIS_LIBM_LIBS -lCrun \
- -lthread -ldoor -lc -ldemangle -lnsl -lrt"
- elif test "x$OPENJDK_TARGET_OS" = xmacosx; then
- JVM_LIBS="$JVM_LIBS -lm"
- elif test "x$OPENJDK_TARGET_OS" = xaix; then
- JVM_LIBS="$JVM_LIBS -Wl,-lC_r -lm -ldl -lpthread"
- elif test "x$OPENJDK_TARGET_OS" = xbsd; then
- JVM_LIBS="$JVM_LIBS -lm"
- elif test "x$OPENJDK_TARGET_OS" = xwindows; then
- JVM_LIBS="$JVM_LIBS kernel32.lib user32.lib gdi32.lib winspool.lib \
- comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib \
- wsock32.lib winmm.lib version.lib psapi.lib"
- fi
-
- # Set JVM_ASFLAGS
- if test "x$OPENJDK_TARGET_OS" = xlinux; then
- if test "x$OPENJDK_TARGET_CPU" = xx86; then
- JVM_ASFLAGS="$JVM_ASFLAGS -march=i586"
- fi
- elif test "x$OPENJDK_TARGET_OS" = xmacosx; then
- JVM_ASFLAGS="$JVM_ASFLAGS -x assembler-with-cpp -mno-omit-leaf-frame-pointer -mstack-alignment=16"
- fi
-
- LDFLAGS_JDKLIB="${LDFLAGS_JDKLIB} ${EXTRA_LDFLAGS_JDK}"
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- # Special extras...
- if test "x$TOOLCHAIN_TYPE" = xsolstudio; then
- if test "x$OPENJDK_BUILD_CPU_ARCH" = "xsparc"; then
- OPENJDK_BUILD_CFLAGS_JDKLIB_EXTRA="${OPENJDK_BUILD_CFLAGS_JDKLIB_EXTRA} -xregs=no%appl"
- OPENJDK_BUILD_CXXFLAGS_JDKLIB_EXTRA="${OPENJDK_BUILD_CXXFLAGS_JDKLIB_EXTRA} -xregs=no%appl"
- fi
- OPENJDK_BUILD_CFLAGS_JDKLIB_EXTRA="${OPENJDK_BUILD_CFLAGS_JDKLIB_EXTRA} -errtags=yes -errfmt"
- OPENJDK_BUILD_CXXFLAGS_JDKLIB_EXTRA="${OPENJDK_BUILD_CXXFLAGS_JDKLIB_EXTRA} -errtags=yes -errfmt"
- elif test "x$TOOLCHAIN_TYPE" = xxlc; then
- OPENJDK_BUILD_CFLAGS_JDK="${OPENJDK_BUILD_CFLAGS_JDK} -qchars=signed -qfullpath -qsaveopt"
- OPENJDK_BUILD_CXXFLAGS_JDK="${OPENJDK_BUILD_CXXFLAGS_JDK} -qchars=signed -qfullpath -qsaveopt"
- elif test "x$TOOLCHAIN_TYPE" = xgcc; then
- OPENJDK_BUILD_CXXSTD_CXXFLAG="-std=gnu++98"
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- # Execute function body
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if the C++ compiler supports \"$OPENJDK_BUILD_CXXSTD_CXXFLAG -Werror\"" >&5
-$as_echo_n "checking if the C++ compiler supports \"$OPENJDK_BUILD_CXXSTD_CXXFLAG -Werror\"... " >&6; }
- supports=yes
-
- saved_cxxflags="$CXXFLAGS"
- CXXFLAGS="$CXXFLAG $OPENJDK_BUILD_CXXSTD_CXXFLAG -Werror"
- ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-int i;
-_ACEOF
-if ac_fn_cxx_try_compile "$LINENO"; then :
-
-else
- supports=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
- CXXFLAGS="$saved_cxxflags"
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $supports" >&5
-$as_echo "$supports" >&6; }
- if test "x$supports" = "xyes" ; then
- :
-
- else
- :
- OPENJDK_BUILD_CXXSTD_CXXFLAG=""
- fi
-
-
-
-
-
-
-
-
-
-
-
-
- OPENJDK_BUILD_CXXFLAGS_JDK="${OPENJDK_BUILD_CXXFLAGS_JDK} ${OPENJDK_BUILD_CXXSTD_CXXFLAG}"
- OPENJDK_BUILD_JVM_CFLAGS="${OPENJDK_BUILD_JVM_CFLAGS} ${OPENJDK_BUILD_CXXSTD_CXXFLAG}"
-
- fi
- if test "x$OPENJDK_TARGET_OS" = xsolaris; then
- OPENJDK_BUILD_CFLAGS_JDK="${OPENJDK_BUILD_CFLAGS_JDK} -D__solaris__"
- OPENJDK_BUILD_CXXFLAGS_JDK="${OPENJDK_BUILD_CXXFLAGS_JDK} -D__solaris__"
- fi
-
- OPENJDK_BUILD_CFLAGS_JDK="${OPENJDK_BUILD_CFLAGS_JDK} ${OPENJDK_BUILD_EXTRA_CFLAGS}"
- OPENJDK_BUILD_CXXFLAGS_JDK="${OPENJDK_BUILD_CXXFLAGS_JDK} ${OPENJDK_BUILD_EXTRA_CXXFLAGS}"
- OPENJDK_BUILD_LDFLAGS_JDK="${OPENJDK_BUILD_LDFLAGS_JDK} ${OPENJDK_BUILD_EXTRA_LDFLAGS}"
-
- ###############################################################################
- #
- # Now setup the CFLAGS and LDFLAGS for the JDK build.
- # Later we will also have CFLAGS and LDFLAGS for the hotspot subrepo build.
- #
-
- # Setup compiler/platform specific flags into
- # OPENJDK_BUILD_CFLAGS_JDK - C Compiler flags
- # OPENJDK_BUILD_CXXFLAGS_JDK - C++ Compiler flags
- # OPENJDK_BUILD_COMMON_CCXXFLAGS_JDK - common to C and C++
- if test "x$TOOLCHAIN_TYPE" = xgcc; then
- OPENJDK_BUILD_JVM_CFLAGS="$OPENJDK_BUILD_JVM_CFLAGS -D_GNU_SOURCE"
- OPENJDK_BUILD_JVM_CFLAGS="$OPENJDK_BUILD_JVM_CFLAGS -D_REENTRANT"
- OPENJDK_BUILD_JVM_CFLAGS="$OPENJDK_BUILD_JVM_CFLAGS -fcheck-new"
- if test "x$OPENJDK_BUILD_CPU" = xx86; then
- # Force compatibility with i586 on 32 bit intel platforms.
- OPENJDK_BUILD_COMMON_CCXXFLAGS="${OPENJDK_BUILD_COMMON_CCXXFLAGS} -march=i586"
- OPENJDK_BUILD_JVM_CFLAGS="$OPENJDK_BUILD_JVM_CFLAGS -march=i586"
- fi
- OPENJDK_BUILD_COMMON_CCXXFLAGS_JDK="$OPENJDK_BUILD_COMMON_CCXXFLAGS $OPENJDK_BUILD_COMMON_CCXXFLAGS_JDK -Wall -Wextra -Wno-unused -Wno-unused-parameter -Wformat=2 \
- -pipe -D_GNU_SOURCE -D_REENTRANT -D_LARGEFILE64_SOURCE"
- case $OPENJDK_BUILD_CPU_ARCH in
- arm )
- # on arm we don't prevent gcc to omit frame pointer but do prevent strict aliasing
- OPENJDK_BUILD_CFLAGS_JDK="${OPENJDK_BUILD_CFLAGS_JDK} -fno-strict-aliasing"
- OPENJDK_BUILD_COMMON_CCXXFLAGS_JDK="${OPENJDK_BUILD_COMMON_CCXXFLAGS_JDK} -fsigned-char"
- ;;
- ppc )
- # on ppc we don't prevent gcc to omit frame pointer but do prevent strict aliasing
- OPENJDK_BUILD_CFLAGS_JDK="${OPENJDK_BUILD_CFLAGS_JDK} -fno-strict-aliasing"
- ;;
- s390 )
- OPENJDK_BUILD_COMMON_CCXXFLAGS_JDK="$OPENJDK_BUILD_COMMON_CCXXFLAGS_JDK -fno-omit-frame-pointer -mbackchain -march=z10"
- OPENJDK_BUILD_CFLAGS_JDK="${OPENJDK_BUILD_CFLAGS_JDK} -fno-strict-aliasing"
- ;;
- * )
- OPENJDK_BUILD_COMMON_CCXXFLAGS_JDK="$OPENJDK_BUILD_COMMON_CCXXFLAGS_JDK -fno-omit-frame-pointer"
- OPENJDK_BUILD_CFLAGS_JDK="${OPENJDK_BUILD_CFLAGS_JDK} -fno-strict-aliasing"
- ;;
- esac
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- # Execute function body
-
- # Need to assign to a variable since m4 is blocked from modifying parts in [].
- REFERENCE_VERSION=6
-
- if [[ "$REFERENCE_VERSION" =~ (.*\.){4} ]] ; then
- as_fn_error $? "Internal error: Cannot compare to 6, only four parts (W.X.Y.Z) is supported" "$LINENO" 5
- fi
-
- if [[ "$REFERENCE_VERSION" =~ [0-9]{6} ]] ; then
- as_fn_error $? "Internal error: Cannot compare to 6, only parts < 99999 is supported" "$LINENO" 5
- fi
-
- # Version comparison method inspired by http://stackoverflow.com/a/24067243
- COMPARABLE_REFERENCE_VERSION=`$AWK -F. '{ printf("%05d%05d%05d%05d\n", $1, $2, $3, $4) }' <<< "$REFERENCE_VERSION"`
-
- if test $OPENJDK_BUILD_COMPARABLE_ACTUAL_VERSION -ge $COMPARABLE_REFERENCE_VERSION ; then
- :
-
- # These flags are required for GCC 6 builds as undefined behaviour in OpenJDK code
- # runs afoul of the more aggressive versions of these optimisations.
- # Notably, value range propagation now assumes that the this pointer of C++
- # member functions is non-null.
- NO_DELETE_NULL_POINTER_CHECKS_CFLAG="-fno-delete-null-pointer-checks"
- NO_LIFETIME_DSE_CFLAG="-fno-lifetime-dse"
- { $as_echo "$as_me:${as_lineno-$LINENO}: GCC >= 6 detected; adding ${NO_DELETE_NULL_POINTER_CHECKS_CFLAG} and ${NO_LIFETIME_DSE_CFLAG}" >&5
-$as_echo "$as_me: GCC >= 6 detected; adding ${NO_DELETE_NULL_POINTER_CHECKS_CFLAG} and ${NO_LIFETIME_DSE_CFLAG}" >&6;}
- OPENJDK_BUILD_CFLAGS_JDK="$OPENJDK_BUILD_CFLAGS_JDK ${NO_DELETE_NULL_POINTER_CHECKS_CFLAG} ${NO_LIFETIME_DSE_CFLAG}"
- OPENJDK_BUILD_JVM_CFLAGS="$OPENJDK_BUILD_JVM_CFLAGS ${NO_DELETE_NULL_POINTER_CHECKS_CFLAG} ${NO_LIFETIME_DSE_CFLAG}"
-
- else
- :
-
- fi
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- elif test "x$TOOLCHAIN_TYPE" = xclang; then
- OPENJDK_BUILD_JVM_CFLAGS="$OPENJDK_BUILD_JVM_CFLAGS -D_GNU_SOURCE"
-
- # Restrict the debug information created by Clang to avoid
- # too big object files and speed the build up a little bit
- # (see http://llvm.org/bugs/show_bug.cgi?id=7554)
- OPENJDK_BUILD_JVM_CFLAGS="$OPENJDK_BUILD_JVM_CFLAGS -flimit-debug-info"
- if test "x$OPENJDK_BUILD_OS" = xlinux; then
- if test "x$OPENJDK_BUILD_CPU" = xx86; then
- # Force compatibility with i586 on 32 bit intel platforms.
- OPENJDK_BUILD_COMMON_CCXXFLAGS="${OPENJDK_BUILD_COMMON_CCXXFLAGS} -march=i586"
- OPENJDK_BUILD_JVM_CFLAGS="$OPENJDK_BUILD_JVM_CFLAGS -march=i586"
- fi
- OPENJDK_BUILD_JVM_CFLAGS="$OPENJDK_BUILD_JVM_CFLAGS -Wno-sometimes-uninitialized"
- OPENJDK_BUILD_COMMON_CCXXFLAGS_JDK="$OPENJDK_BUILD_COMMON_CCXXFLAGS $OPENJDK_BUILD_COMMON_CCXXFLAGS_JDK -Wall -Wextra -Wno-unused -Wno-unused-parameter -Wformat=2 \
- -pipe -D_GNU_SOURCE -D_REENTRANT -D_LARGEFILE64_SOURCE"
- case $OPENJDK_BUILD_CPU_ARCH in
- ppc )
- # on ppc we don't prevent gcc to omit frame pointer but do prevent strict aliasing
- OPENJDK_BUILD_CFLAGS_JDK="${OPENJDK_BUILD_CFLAGS_JDK} -fno-strict-aliasing"
- ;;
- * )
- OPENJDK_BUILD_COMMON_CCXXFLAGS_JDK="$OPENJDK_BUILD_COMMON_CCXXFLAGS_JDK -fno-omit-frame-pointer"
- OPENJDK_BUILD_CFLAGS_JDK="${OPENJDK_BUILD_CFLAGS_JDK} -fno-strict-aliasing"
- ;;
- esac
- fi
- elif test "x$TOOLCHAIN_TYPE" = xsolstudio; then
- OPENJDK_BUILD_JVM_CFLAGS="$OPENJDK_BUILD_JVM_CFLAGS -DSPARC_WORKS"
- OPENJDK_BUILD_COMMON_CCXXFLAGS_JDK="$OPENJDK_BUILD_COMMON_CCXXFLAGS $OPENJDK_BUILD_COMMON_CCXXFLAGS_JDK -DTRACING -DMACRO_MEMSYS_OPS -DBREAKPTS"
- if test "x$OPENJDK_BUILD_CPU_ARCH" = xx86; then
- OPENJDK_BUILD_COMMON_CCXXFLAGS_JDK="$OPENJDK_BUILD_COMMON_CCXXFLAGS_JDK -DcpuIntel -Di586 -D$OPENJDK_BUILD_CPU_LEGACY_LIB"
- fi
-
- OPENJDK_BUILD_CFLAGS_JDK="$OPENJDK_BUILD_CFLAGS_JDK -xc99=%none -xCC -errshort=tags -Xa -v -mt -W0,-noglobal"
- OPENJDK_BUILD_CXXFLAGS_JDK="$OPENJDK_BUILD_CXXFLAGS_JDK -errtags=yes +w -mt -features=no%except -DCC_NOEX -norunpath -xnolib"
- elif test "x$TOOLCHAIN_TYPE" = xxlc; then
- OPENJDK_BUILD_JVM_CFLAGS="$OPENJDK_BUILD_JVM_CFLAGS -D_REENTRANT"
- OPENJDK_BUILD_CFLAGS_JDK="$OPENJDK_BUILD_CFLAGS_JDK -D_GNU_SOURCE -D_REENTRANT -D_LARGEFILE64_SOURCE -DSTDC"
- OPENJDK_BUILD_CXXFLAGS_JDK="$OPENJDK_BUILD_CXXFLAGS_JDK -D_GNU_SOURCE -D_REENTRANT -D_LARGEFILE64_SOURCE -DSTDC"
- elif test "x$TOOLCHAIN_TYPE" = xmicrosoft; then
- OPENJDK_BUILD_COMMON_CCXXFLAGS_JDK="$OPENJDK_BUILD_COMMON_CCXXFLAGS $OPENJDK_BUILD_COMMON_CCXXFLAGS_JDK \
- -MD -Zc:wchar_t- -W3 -wd4800 \
- -DWIN32_LEAN_AND_MEAN \
- -D_CRT_SECURE_NO_DEPRECATE -D_CRT_NONSTDC_NO_DEPRECATE \
- -D_WINSOCK_DEPRECATED_NO_WARNINGS \
- -DWIN32 -DIAL"
- if test "x$OPENJDK_BUILD_CPU" = xx86_64; then
- OPENJDK_BUILD_COMMON_CCXXFLAGS_JDK="$OPENJDK_BUILD_COMMON_CCXXFLAGS_JDK -D_AMD64_ -Damd64"
- else
- OPENJDK_BUILD_COMMON_CCXXFLAGS_JDK="$OPENJDK_BUILD_COMMON_CCXXFLAGS_JDK -D_X86_ -Dx86"
- fi
- # If building with Visual Studio 2010, we can still use _STATIC_CPPLIB to
- # avoid bundling msvcpNNN.dll. Doesn't work with newer versions of visual
- # studio.
- if test "x$TOOLCHAIN_VERSION" = "x2010"; then
- STATIC_CPPLIB_FLAGS="-D_STATIC_CPPLIB -D_DISABLE_DEPRECATE_STATIC_CPPLIB"
- OPENJDK_BUILD_COMMON_CCXXFLAGS_JDK="$OPENJDK_BUILD_COMMON_CCXXFLAGS_JDK $STATIC_CPPLIB_FLAGS"
- OPENJDK_BUILD_JVM_CFLAGS="$OPENJDK_BUILD_JVM_CFLAGS $STATIC_CPPLIB_FLAGS"
- fi
- fi
-
- ###############################################################################
-
- # Adjust flags according to debug level.
- case $DEBUG_LEVEL in
- fastdebug | slowdebug )
- OPENJDK_BUILD_CFLAGS_JDK="$OPENJDK_BUILD_CFLAGS_JDK $CFLAGS_DEBUG_SYMBOLS $CFLAGS_DEBUG_OPTIONS"
- OPENJDK_BUILD_CXXFLAGS_JDK="$OPENJDK_BUILD_CXXFLAGS_JDK $CXXFLAGS_DEBUG_SYMBOLS $CXXFLAGS_DEBUG_OPTIONS"
- ;;
- release )
- ;;
- * )
- as_fn_error $? "Unrecognized \$DEBUG_LEVEL: $DEBUG_LEVEL" "$LINENO" 5
- ;;
- esac
-
- # Set some common defines. These works for all compilers, but assume
- # -D is universally accepted.
-
- # Setup endianness
- if test "x$OPENJDK_BUILD_CPU_ENDIAN" = xlittle; then
- # The macro _LITTLE_ENDIAN needs to be defined the same to avoid the
- # Sun C compiler warning message: warning: macro redefined: _LITTLE_ENDIAN
- # (The Solaris X86 system defines this in file /usr/include/sys/isa_defs.h).
- # Note: -Dmacro is the same as #define macro 1
- # -Dmacro= is the same as #define macro
- if test "x$OPENJDK_BUILD_OS" = xsolaris; then
- OPENJDK_BUILD_COMMON_CCXXFLAGS_JDK="$OPENJDK_BUILD_COMMON_CCXXFLAGS_JDK -D_LITTLE_ENDIAN="
- else
- OPENJDK_BUILD_COMMON_CCXXFLAGS_JDK="$OPENJDK_BUILD_COMMON_CCXXFLAGS_JDK -D_LITTLE_ENDIAN"
- fi
- else
- # Same goes for _BIG_ENDIAN. Do we really need to set *ENDIAN on Solaris if they
- # are defined in the system?
- if test "x$OPENJDK_BUILD_OS" = xsolaris; then
- OPENJDK_BUILD_COMMON_CCXXFLAGS_JDK="$OPENJDK_BUILD_COMMON_CCXXFLAGS_JDK -D_BIG_ENDIAN="
- else
- OPENJDK_BUILD_COMMON_CCXXFLAGS_JDK="$OPENJDK_BUILD_COMMON_CCXXFLAGS_JDK -D_BIG_ENDIAN"
- fi
- fi
-
- # Always enable optional macros for VM.
- OPENJDK_BUILD_JVM_CFLAGS="$OPENJDK_BUILD_JVM_CFLAGS -D__STDC_FORMAT_MACROS"
- OPENJDK_BUILD_JVM_CFLAGS="$OPENJDK_BUILD_JVM_CFLAGS -D__STDC_LIMIT_MACROS"
- OPENJDK_BUILD_JVM_CFLAGS="$OPENJDK_BUILD_JVM_CFLAGS -D__STDC_CONSTANT_MACROS"
-
- # Setup target OS define. Use OS target name but in upper case.
- OPENJDK_BUILD_OS_UPPERCASE=`$ECHO $OPENJDK_BUILD_OS | $TR 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
- OPENJDK_BUILD_COMMON_CCXXFLAGS_JDK="$OPENJDK_BUILD_COMMON_CCXXFLAGS_JDK -D$OPENJDK_BUILD_OS_UPPERCASE"
-
- # Setup target CPU
- OPENJDK_BUILD_COMMON_CCXXFLAGS_JDK="$OPENJDK_BUILD_COMMON_CCXXFLAGS_JDK \
- $OPENJDK_BUILD_ADD_LP64 \
- -DARCH='\"$OPENJDK_BUILD_CPU_LEGACY\"' -D$OPENJDK_BUILD_CPU_LEGACY"
-
- # Setup debug/release defines
- if test "x$DEBUG_LEVEL" = xrelease; then
- OPENJDK_BUILD_COMMON_CCXXFLAGS_JDK="$OPENJDK_BUILD_COMMON_CCXXFLAGS_JDK -DNDEBUG"
- if test "x$OPENJDK_BUILD_OS" = xsolaris; then
- OPENJDK_BUILD_COMMON_CCXXFLAGS_JDK="$OPENJDK_BUILD_COMMON_CCXXFLAGS_JDK -DTRIMMED"
- fi
- else
- OPENJDK_BUILD_COMMON_CCXXFLAGS_JDK="$OPENJDK_BUILD_COMMON_CCXXFLAGS_JDK -DDEBUG"
- fi
-
- # Optional POSIX functionality needed by the VM
-
- if test "x$HAS_CLOCK_GETTIME" = "xtrue"; then
- OPENJDK_BUILD_JVM_CFLAGS="$OPENJDK_BUILD_JVM_CFLAGS -DSUPPORTS_CLOCK_MONOTONIC"
- if test "x$CLOCK_GETTIME_IN_LIBRT" = "xtrue"; then
- OPENJDK_BUILD_JVM_CFLAGS="$OPENJDK_BUILD_JVM_CFLAGS -DNEEDS_LIBRT"
- fi
- fi
-
-
- # Set some additional per-OS defines.
- if test "x$OPENJDK_BUILD_OS" = xlinux; then
- OPENJDK_BUILD_JVM_CFLAGS="$OPENJDK_BUILD_JVM_CFLAGS -DLINUX"
- OPENJDK_BUILD_JVM_CFLAGS="$OPENJDK_BUILD_JVM_CFLAGS -pipe $PICFLAG -fno-rtti -fno-exceptions \
- -fvisibility=hidden -fno-strict-aliasing -fno-omit-frame-pointer"
- elif test "x$OPENJDK_BUILD_OS" = xsolaris; then
- OPENJDK_BUILD_JVM_CFLAGS="$OPENJDK_BUILD_JVM_CFLAGS -DSOLARIS"
- OPENJDK_BUILD_JVM_CFLAGS="$OPENJDK_BUILD_JVM_CFLAGS -template=no%extdef -features=no%split_init \
- -D_Crun_inline_placement -library=stlport4 $PICFLAG -mt -features=no%except"
- elif test "x$OPENJDK_BUILD_OS" = xmacosx; then
- OPENJDK_BUILD_COMMON_CCXXFLAGS_JDK="$OPENJDK_BUILD_COMMON_CCXXFLAGS_JDK -D_ALLBSD_SOURCE -D_DARWIN_UNLIMITED_SELECT"
- OPENJDK_BUILD_JVM_CFLAGS="$OPENJDK_BUILD_JVM_CFLAGS -D_ALLBSD_SOURCE"
- OPENJDK_BUILD_JVM_CFLAGS="$OPENJDK_BUILD_JVM_CFLAGS -D_DARWIN_C_SOURCE -D_XOPEN_SOURCE"
- OPENJDK_BUILD_JVM_CFLAGS="$OPENJDK_BUILD_JVM_CFLAGS -fno-rtti -fno-exceptions -fvisibility=hidden \
- -mno-omit-leaf-frame-pointer -mstack-alignment=16 -pipe -fno-strict-aliasing \
- -fno-omit-frame-pointer"
- elif test "x$OPENJDK_BUILD_OS" = xaix; then
- OPENJDK_BUILD_JVM_CFLAGS="$OPENJDK_BUILD_JVM_CFLAGS -DAIX"
- OPENJDK_BUILD_JVM_CFLAGS="$OPENJDK_BUILD_JVM_CFLAGS -qtune=balanced \
- -qalias=noansi -qstrict -qtls=default -qlanglvl=c99vla \
- -qlanglvl=noredefmac -qnortti -qnoeh -qignerrno"
- # We need '-qminimaltoc' or '-qpic=large -bbigtoc' if the TOC overflows.
- # Hotspot now overflows its 64K TOC (currently only for slowdebug),
- # so for slowdebug we build with '-qpic=large -bbigtoc'.
- if test "x$DEBUG_LEVEL" = xslowdebug; then
- OPENJDK_BUILD_JVM_CFLAGS="$OPENJDK_BUILD_JVM_CFLAGS -qpic=large"
- fi
- elif test "x$OPENJDK_BUILD_OS" = xbsd; then
- OPENJDK_BUILD_COMMON_CCXXFLAGS_JDK="$OPENJDK_BUILD_COMMON_CCXXFLAGS_JDK -D_ALLBSD_SOURCE"
- elif test "x$OPENJDK_BUILD_OS" = xwindows; then
- OPENJDK_BUILD_JVM_CFLAGS="$OPENJDK_BUILD_JVM_CFLAGS -D_WINDOWS -DWIN32 -D_JNI_IMPLEMENTATION_"
- OPENJDK_BUILD_JVM_CFLAGS="$OPENJDK_BUILD_JVM_CFLAGS -nologo -W3 -MD -MP"
- fi
-
- # Set some additional per-CPU defines.
- if test "x$OPENJDK_BUILD_OS-$OPENJDK_BUILD_CPU" = xwindows-x86; then
- OPENJDK_BUILD_JVM_CFLAGS="$OPENJDK_BUILD_JVM_CFLAGS -arch:IA32"
- elif test "x$OPENJDK_BUILD_OS-$OPENJDK_BUILD_CPU" = xsolaris-sparcv9; then
- OPENJDK_BUILD_JVM_CFLAGS="$OPENJDK_BUILD_JVM_CFLAGS -xarch=sparc"
- elif test "x$OPENJDK_BUILD_CPU" = xppc64; then
- if test "x$OPENJDK_BUILD_OS" = xlinux; then
- OPENJDK_BUILD_JVM_CFLAGS="$OPENJDK_BUILD_JVM_CFLAGS -minsert-sched-nops=regroup_exact -mno-multiple -mno-string"
- # fixes `relocation truncated to fit' error for gcc 4.1.
- OPENJDK_BUILD_JVM_CFLAGS="$OPENJDK_BUILD_JVM_CFLAGS -mminimal-toc"
- # Use ppc64 instructions, but schedule for power5
- OPENJDK_BUILD_JVM_CFLAGS="$OPENJDK_BUILD_JVM_CFLAGS -mcpu=powerpc64 -mtune=power5"
- elif test "x$OPENJDK_BUILD_OS" = xaix; then
- OPENJDK_BUILD_JVM_CFLAGS="$OPENJDK_BUILD_JVM_CFLAGS -qarch=ppc64"
- fi
- elif test "x$OPENJDK_BUILD_CPU" = xppc64le; then
- if test "x$OPENJDK_BUILD_OS" = xlinux; then
- OPENJDK_BUILD_JVM_CFLAGS="$OPENJDK_BUILD_JVM_CFLAGS -minsert-sched-nops=regroup_exact -mno-multiple -mno-string"
- # Little endian machine uses ELFv2 ABI.
- OPENJDK_BUILD_JVM_CFLAGS="$OPENJDK_BUILD_JVM_CFLAGS -DABI_ELFv2"
- # Use Power8, this is the first CPU to support PPC64 LE with ELFv2 ABI.
- OPENJDK_BUILD_JVM_CFLAGS="$OPENJDK_BUILD_JVM_CFLAGS -mcpu=power8 -mtune=power8"
- fi
- elif test "x$OPENJDK_BUILD_CPU" = xs390x; then
- if test "x$OPENJDK_BUILD_OS" = xlinux; then
- OPENJDK_BUILD_JVM_CFLAGS="$OPENJDK_BUILD_JVM_CFLAGS -mbackchain -march=z10"
- fi
- fi
-
- if test "x$OPENJDK_BUILD_CPU_ENDIAN" = xlittle; then
- OPENJDK_BUILD_JVM_CFLAGS="$OPENJDK_BUILD_JVM_CFLAGS -DVM_LITTLE_ENDIAN"
- fi
-
- if test "x$OPENJDK_BUILD_CPU_BITS" = x64; then
- if test "x$OPENJDK_BUILD_OS" != xsolaris && test "x$OPENJDK_BUILD_OS" != xaix; then
- # Solaris does not have _LP64=1 in the old build.
- # xlc on AIX defines _LP64=1 by default and issues a warning if we redefine it.
- OPENJDK_BUILD_JVM_CFLAGS="$OPENJDK_BUILD_JVM_CFLAGS -D_LP64=1"
- fi
- fi
-
- # Set OPENJDK_BUILD_JVM_CFLAGS warning handling
- if test "x$OPENJDK_BUILD_OS" = xlinux; then
- OPENJDK_BUILD_JVM_CFLAGS="$OPENJDK_BUILD_JVM_CFLAGS -Wpointer-arith -Wsign-compare -Wunused-function \
- -Wunused-value -Woverloaded-virtual"
-
- if test "x$TOOLCHAIN_TYPE" = xgcc; then
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- # Execute function body
-
- # Need to assign to a variable since m4 is blocked from modifying parts in [].
- REFERENCE_VERSION=4.8
-
- if [[ "$REFERENCE_VERSION" =~ (.*\.){4} ]] ; then
- as_fn_error $? "Internal error: Cannot compare to 4.8, only four parts (W.X.Y.Z) is supported" "$LINENO" 5
- fi
-
- if [[ "$REFERENCE_VERSION" =~ [0-9]{6} ]] ; then
- as_fn_error $? "Internal error: Cannot compare to 4.8, only parts < 99999 is supported" "$LINENO" 5
- fi
-
- # Version comparison method inspired by http://stackoverflow.com/a/24067243
- COMPARABLE_REFERENCE_VERSION=`$AWK -F. '{ printf("%05d%05d%05d%05d\n", $1, $2, $3, $4) }' <<< "$REFERENCE_VERSION"`
-
- if test $OPENJDK_BUILD_COMPARABLE_ACTUAL_VERSION -ge $COMPARABLE_REFERENCE_VERSION ; then
- :
-
- # These flags either do not work or give spurious warnings prior to gcc 4.8.
- OPENJDK_BUILD_JVM_CFLAGS="$OPENJDK_BUILD_JVM_CFLAGS -Wno-format-zero-length -Wtype-limits -Wuninitialized"
-
-
- else
- :
-
- fi
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- fi
- if ! [[ " $JVM_VARIANTS " =~ " zero " ]] ; then
- # Non-zero builds have stricter warnings
- OPENJDK_BUILD_JVM_CFLAGS="$OPENJDK_BUILD_JVM_CFLAGS -Wreturn-type -Wundef -Wformat=2"
- else
- if test "x$TOOLCHAIN_TYPE" = xclang; then
- # Some versions of llvm do not like -Wundef
- OPENJDK_BUILD_JVM_CFLAGS="$OPENJDK_BUILD_JVM_CFLAGS -Wno-undef"
- fi
- fi
- elif test "x$OPENJDK_BUILD_OS" = xmacosx; then
- OPENJDK_BUILD_JVM_CFLAGS="$OPENJDK_BUILD_JVM_CFLAGS -Wno-deprecated -Wpointer-arith \
- -Wsign-compare -Wundef -Wunused-function -Wformat=2"
- fi
-
- # Additional macosx handling
- if test "x$OPENJDK_BUILD_OS" = xmacosx; then
- # MACOSX_VERSION_MIN is the c++ and ld is -mmacosx-version-min argument. The expected
- # format is X.Y.Z. It's hard-coded to the minimum OSX version on which the
- # JDK can be built and makes the linked binaries compatible even if built on
- # a newer version of the OS.
- MACOSX_VERSION_MIN=10.7.0
-
-
- # Setting --with-macosx-version-max= makes it an error to build or
- # link to macosx APIs that are newer than the given OS version. The expected
- # format for is either nn.n.n or nn.nn.nn. See /usr/include/AvailabilityMacros.h.
-
-# Check whether --with-macosx-version-max was given.
-if test "${with_macosx_version_max+set}" = set; then :
- withval=$with_macosx_version_max;
- if echo "$with_macosx_version_max" | $GREP -q "^[0-9][0-9]\.[0-9]\.[0-9]\$"; then
- MACOSX_VERSION_MAX=$with_macosx_version_max
- elif echo "$with_macosx_version_max" | $GREP -q "^[0-9][0-9]\.[0-9][0-9]\.[0-9][0-9]\$"; then
- MACOSX_VERSION_MAX=$with_macosx_version_max
- elif test "x$with_macosx_version_max" = "xno"; then
- # Use build system default
- MACOSX_VERSION_MAX=
- else
- as_fn_error $? "osx version format must be nn.n.n or nn.nn.nn" "$LINENO" 5
- fi
-
-else
- MACOSX_VERSION_MAX=
-
-fi
-
-
-
- # Let the flags variables get resolved in make for easier override on make
- # command line. AvailabilityMacros.h versions have no dots, ex: 1070.
- OPENJDK_BUILD_COMMON_CCXXFLAGS_JDK="$OPENJDK_BUILD_COMMON_CCXXFLAGS_JDK \
- -DMAC_OS_X_VERSION_MIN_REQUIRED=\$(subst .,,\$(MACOSX_VERSION_MIN)) \
- -mmacosx-version-min=\$(MACOSX_VERSION_MIN)"
- OPENJDK_BUILD_LDFLAGS_JDK="$OPENJDK_BUILD_LDFLAGS_JDK -mmacosx-version-min=\$(MACOSX_VERSION_MIN)"
- OPENJDK_BUILD_JVM_CFLAGS="$OPENJDK_BUILD_JVM_CFLAGS \
- -DMAC_OS_X_VERSION_MIN_REQUIRED=\$(subst .,,\$(MACOSX_VERSION_MIN)) \
- -mmacosx-version-min=\$(MACOSX_VERSION_MIN)"
-
- if test -n "$MACOSX_VERSION_MAX"; then
- OPENJDK_BUILD_COMMON_CCXXFLAGS_JDK="$OPENJDK_BUILD_COMMON_CCXXFLAGS_JDK \
- -DMAC_OS_X_VERSION_MAX_ALLOWED=\$(subst .,,\$(MACOSX_VERSION_MAX))"
- OPENJDK_BUILD_JVM_CFLAGS="$OPENJDK_BUILD_JVM_CFLAGS \
- -DMAC_OS_X_VERSION_MAX_ALLOWED=\$(subst .,,\$(MACOSX_VERSION_MAX))"
- fi
- fi
-
- # Setup some hard coded includes
- OPENJDK_BUILD_COMMON_CCXXFLAGS_JDK="$OPENJDK_BUILD_COMMON_CCXXFLAGS_JDK \
- -I\$(SUPPORT_OUTPUTDIR)/modules_include/java.base \
- -I\$(SUPPORT_OUTPUTDIR)/modules_include/java.base/\$(OPENJDK_TARGET_OS_INCLUDE_SUBDIR) \
- -I${TOPDIR}/src/java.base/share/native/libjava \
- -I${TOPDIR}/src/java.base/$OPENJDK_BUILD_OS_TYPE/native/libjava \
- -I${TOPDIR}/src/hotspot/share/include \
- -I${TOPDIR}/src/hotspot/os/${HOTSPOT_BUILD_OS_TYPE}/include"
-
- # The shared libraries are compiled using the picflag.
- OPENJDK_BUILD_CFLAGS_JDKLIB="$OPENJDK_BUILD_COMMON_CCXXFLAGS_JDK \
- $OPENJDK_BUILD_CFLAGS_JDK $OPENJDK_BUILD_EXTRA_CFLAGS_JDK $PICFLAG $OPENJDK_BUILD_CFLAGS_JDKLIB_EXTRA"
- OPENJDK_BUILD_CXXFLAGS_JDKLIB="$OPENJDK_BUILD_COMMON_CCXXFLAGS_JDK \
- $OPENJDK_BUILD_CXXFLAGS_JDK $OPENJDK_BUILD_EXTRA_CXXFLAGS_JDK $PICFLAG $OPENJDK_BUILD_CXXFLAGS_JDKLIB_EXTRA"
-
- # Executable flags
- OPENJDK_BUILD_CFLAGS_JDKEXE="$OPENJDK_BUILD_COMMON_CCXXFLAGS_JDK $OPENJDK_BUILD_CFLAGS_JDK $OPENJDK_BUILD_EXTRA_CFLAGS_JDK"
- OPENJDK_BUILD_CXXFLAGS_JDKEXE="$OPENJDK_BUILD_COMMON_CCXXFLAGS_JDK $OPENJDK_BUILD_CXXFLAGS_JDK $OPENJDK_BUILD_EXTRA_CXXFLAGS_JDK"
-
-
-
-
-
-
- # Setup LDFLAGS et al.
- #
-
- if test "x$TOOLCHAIN_TYPE" = xmicrosoft; then
- LDFLAGS_MICROSOFT="-nologo -opt:ref"
- OPENJDK_BUILD_LDFLAGS_JDK="$OPENJDK_BUILD_LDFLAGS_JDK $LDFLAGS_MICROSOFT -incremental:no"
- OPENJDK_BUILD_JVM_LDFLAGS="$OPENJDK_BUILD_JVM_LDFLAGS $LDFLAGS_MICROSOFT -opt:icf,8 -subsystem:windows -base:0x8000000"
- if test "x$OPENJDK_BUILD_CPU_BITS" = "x32"; then
- LDFLAGS_SAFESH="-safeseh"
- OPENJDK_BUILD_LDFLAGS_JDK="$OPENJDK_BUILD_LDFLAGS_JDK $LDFLAGS_SAFESH"
- OPENJDK_BUILD_JVM_LDFLAGS="$OPENJDK_BUILD_JVM_LDFLAGS $LDFLAGS_SAFESH"
- # NOTE: Old build added -machine. Probably not needed.
- OPENJDK_BUILD_JVM_LDFLAGS="$OPENJDK_BUILD_JVM_LDFLAGS -machine:I386"
- else
- OPENJDK_BUILD_JVM_LDFLAGS="$OPENJDK_BUILD_JVM_LDFLAGS -machine:AMD64"
- fi
- elif test "x$TOOLCHAIN_TYPE" = xclang; then
- OPENJDK_BUILD_JVM_LDFLAGS="$OPENJDK_BUILD_JVM_LDFLAGS -mno-omit-leaf-frame-pointer -mstack-alignment=16 -stdlib=libstdc++ -fPIC"
- if test "x$OPENJDK_BUILD_OS" = xmacosx; then
- # FIXME: We should really generalize SET_SHARED_LIBRARY_ORIGIN instead.
- OPENJDK_BUILD_JVM_LDFLAGS="$OPENJDK_BUILD_JVM_LDFLAGS -Wl,-rpath,@loader_path/. -Wl,-rpath,@loader_path/.."
- fi
- elif test "x$TOOLCHAIN_TYPE" = xgcc; then
- # If this is a --hash-style=gnu system, use --hash-style=both, why?
- # We have previously set HAS_GNU_HASH if this is the case
- if test -n "$HAS_GNU_HASH"; then
- OPENJDK_BUILD_LDFLAGS_HASH_STYLE="-Wl,--hash-style=both"
- OPENJDK_BUILD_LDFLAGS_JDK="${OPENJDK_BUILD_LDFLAGS_JDK} $OPENJDK_BUILD_LDFLAGS_HASH_STYLE"
- OPENJDK_BUILD_JVM_LDFLAGS="$OPENJDK_BUILD_JVM_LDFLAGS $OPENJDK_BUILD_LDFLAGS_HASH_STYLE"
- fi
- if test "x$OPENJDK_BUILD_OS" = xmacosx; then
- OPENJDK_BUILD_JVM_LDFLAGS="$OPENJDK_BUILD_JVM_LDFLAGS -Wl,-rpath,@loader_path/. -Wl,-rpath,@loader_path/.."
- fi
- if test "x$OPENJDK_BUILD_OS" = xlinux; then
- # And since we now know that the linker is gnu, then add -z defs, to forbid
- # undefined symbols in object files.
- LDFLAGS_NO_UNDEF_SYM="-Wl,-z,defs"
- OPENJDK_BUILD_LDFLAGS_JDK="${OPENJDK_BUILD_LDFLAGS_JDK} $LDFLAGS_NO_UNDEF_SYM"
- OPENJDK_BUILD_JVM_LDFLAGS="$OPENJDK_BUILD_JVM_LDFLAGS $LDFLAGS_NO_UNDEF_SYM"
- LDFLAGS_NO_EXEC_STACK="-Wl,-z,noexecstack"
- OPENJDK_BUILD_JVM_LDFLAGS="$OPENJDK_BUILD_JVM_LDFLAGS $LDFLAGS_NO_EXEC_STACK"
- if test "x$OPENJDK_BUILD_CPU" = xx86; then
- OPENJDK_BUILD_JVM_LDFLAGS="$OPENJDK_BUILD_JVM_LDFLAGS -march=i586"
- fi
- case $DEBUG_LEVEL in
- release )
- # tell linker to optimize libraries.
- # Should this be supplied to the OSS linker as well?
- LDFLAGS_DEBUGLEVEL_release="-Wl,-O1"
- OPENJDK_BUILD_LDFLAGS_JDK="${OPENJDK_BUILD_LDFLAGS_JDK} $LDFLAGS_DEBUGLEVEL_release"
- OPENJDK_BUILD_JVM_LDFLAGS="$OPENJDK_BUILD_JVM_LDFLAGS $LDFLAGS_DEBUGLEVEL_release"
- if test "x$HAS_LINKER_RELRO" = "xtrue"; then
- OPENJDK_BUILD_JVM_LDFLAGS="$OPENJDK_BUILD_JVM_LDFLAGS $LINKER_RELRO_FLAG"
- fi
- ;;
- slowdebug )
- # Hotspot always let the linker optimize
- OPENJDK_BUILD_JVM_LDFLAGS="$OPENJDK_BUILD_JVM_LDFLAGS -Wl,-O1"
- if test "x$HAS_LINKER_NOW" = "xtrue"; then
- # do relocations at load
- OPENJDK_BUILD_LDFLAGS_JDK="$OPENJDK_BUILD_LDFLAGS_JDK $LINKER_NOW_FLAG"
- OPENJDK_BUILD_LDFLAGS_CXX_JDK="$OPENJDK_BUILD_LDFLAGS_CXX_JDK $LINKER_NOW_FLAG"
- OPENJDK_BUILD_JVM_LDFLAGS="$OPENJDK_BUILD_JVM_LDFLAGS $LINKER_NOW_FLAG"
- fi
- if test "x$HAS_LINKER_RELRO" = "xtrue"; then
- # mark relocations read only
- OPENJDK_BUILD_LDFLAGS_JDK="$OPENJDK_BUILD_LDFLAGS_JDK $LINKER_RELRO_FLAG"
- OPENJDK_BUILD_LDFLAGS_CXX_JDK="$OPENJDK_BUILD_LDFLAGS_CXX_JDK $LINKER_RELRO_FLAG"
- OPENJDK_BUILD_JVM_LDFLAGS="$OPENJDK_BUILD_JVM_LDFLAGS $LINKER_RELRO_FLAG"
- fi
- ;;
- fastdebug )
- # Hotspot always let the linker optimize
- OPENJDK_BUILD_JVM_LDFLAGS="$OPENJDK_BUILD_JVM_LDFLAGS -Wl,-O1"
- if test "x$HAS_LINKER_RELRO" = "xtrue"; then
- # mark relocations read only
- OPENJDK_BUILD_LDFLAGS_JDK="$OPENJDK_BUILD_LDFLAGS_JDK $LINKER_RELRO_FLAG"
- OPENJDK_BUILD_LDFLAGS_CXX_JDK="$OPENJDK_BUILD_LDFLAGS_CXX_JDK $LINKER_RELRO_FLAG"
- OPENJDK_BUILD_JVM_LDFLAGS="$OPENJDK_BUILD_JVM_LDFLAGS $LINKER_RELRO_FLAG"
- fi
- ;;
- * )
- as_fn_error $? "Unrecognized \$DEBUG_LEVEL: $DEBUG_LEVEL" "$LINENO" 5
- ;;
- esac
- fi
- elif test "x$TOOLCHAIN_TYPE" = xsolstudio; then
- LDFLAGS_SOLSTUDIO="-Wl,-z,defs"
- OPENJDK_BUILD_LDFLAGS_JDK="$OPENJDK_BUILD_LDFLAGS_JDK $LDFLAGS_SOLSTUDIO -ztext"
- LDFLAGS_CXX_SOLSTUDIO="-norunpath"
- OPENJDK_BUILD_LDFLAGS_CXX_JDK="$OPENJDK_BUILD_LDFLAGS_CXX_JDK $LDFLAGS_CXX_SOLSTUDIO -xnolib"
- OPENJDK_BUILD_JVM_LDFLAGS="$OPENJDK_BUILD_JVM_LDFLAGS $LDFLAGS_SOLSTUDIO -library=%none -mt $LDFLAGS_CXX_SOLSTUDIO -z noversion"
- if test "x$OPENJDK_BUILD_CPU_ARCH" = "xsparc"; then
- OPENJDK_BUILD_JVM_LDFLAGS="$OPENJDK_BUILD_JVM_LDFLAGS -xarch=sparc"
- fi
- elif test "x$TOOLCHAIN_TYPE" = xxlc; then
- LDFLAGS_XLC="-b64 -brtl -bnolibpath -bexpall -bernotok -btextpsize:64K -bdatapsize:64K -bstackpsize:64K"
- OPENJDK_BUILD_LDFLAGS_JDK="${OPENJDK_BUILD_LDFLAGS_JDK} $LDFLAGS_XLC"
- OPENJDK_BUILD_JVM_LDFLAGS="$OPENJDK_BUILD_JVM_LDFLAGS $LDFLAGS_XLC"
- # We need '-qminimaltoc' or '-qpic=large -bbigtoc' if the TOC overflows.
- # Hotspot now overflows its 64K TOC (currently only for slowdebug),
- # so for slowdebug we build with '-qpic=large -bbigtoc'.
- if test "x$DEBUG_LEVEL" = xslowdebug; then
- OPENJDK_BUILD_JVM_LDFLAGS="$OPENJDK_BUILD_JVM_LDFLAGS -bbigtoc"
- fi
- fi
-
- # Customize LDFLAGS for executables
-
- OPENJDK_BUILD_LDFLAGS_JDKEXE="${OPENJDK_BUILD_LDFLAGS_JDK}"
-
- if test "x$TOOLCHAIN_TYPE" = xmicrosoft; then
- if test "x$OPENJDK_BUILD_CPU_BITS" = "x64"; then
- LDFLAGS_STACK_SIZE=1048576
- else
- LDFLAGS_STACK_SIZE=327680
- fi
- OPENJDK_BUILD_LDFLAGS_JDKEXE="${OPENJDK_BUILD_LDFLAGS_JDKEXE} /STACK:$LDFLAGS_STACK_SIZE"
- elif test "x$OPENJDK_BUILD_OS" = xlinux; then
- OPENJDK_BUILD_LDFLAGS_JDKEXE="$OPENJDK_BUILD_LDFLAGS_JDKEXE -Wl,--allow-shlib-undefined"
- fi
-
- OPENJDK_BUILD_LDFLAGS_JDKEXE="${OPENJDK_BUILD_LDFLAGS_JDKEXE} ${OPENJDK_BUILD_EXTRA_LDFLAGS_JDK}"
-
- # Customize LDFLAGS for libs
- OPENJDK_BUILD_LDFLAGS_JDKLIB="${OPENJDK_BUILD_LDFLAGS_JDK}"
-
- OPENJDK_BUILD_LDFLAGS_JDKLIB="${OPENJDK_BUILD_LDFLAGS_JDKLIB} ${SHARED_LIBRARY_FLAGS}"
- OPENJDK_BUILD_LDFLAGS_JDKLIB="${OPENJDK_BUILD_LDFLAGS_JDKLIB} ${LDFLAGS_NO_EXEC_STACK}"
- if test "x$TOOLCHAIN_TYPE" = xmicrosoft; then
- OPENJDK_BUILD_JAVA_BASE_LDFLAGS="${OPENJDK_BUILD_JAVA_BASE_LDFLAGS} \
- -libpath:${OUTPUTDIR}/support/modules_libs/java.base"
- OPENJDK_BUILD_JDKLIB_LIBS=""
- else
- OPENJDK_BUILD_JAVA_BASE_LDFLAGS="${OPENJDK_BUILD_JAVA_BASE_LDFLAGS} \
- -L\$(SUPPORT_OUTPUTDIR)/modules_libs/java.base"
-
- if test "xBUILD" = "xTARGET"; then
- # On some platforms (mac) the linker warns about non existing -L dirs.
- # For any of the variants server, client or minimal, the dir matches the
- # variant name. The "main" variant should be used for linking. For the
- # rest, the dir is just server.
- if [[ " $JVM_VARIANTS " =~ " server " ]] || [[ " $JVM_VARIANTS " =~ " client " ]] \
- || [[ " $JVM_VARIANTS " =~ " minimal " ]] ; then
- OPENJDK_BUILD_JAVA_BASE_LDFLAGS="${OPENJDK_BUILD_JAVA_BASE_LDFLAGS} \
- -L\$(SUPPORT_OUTPUTDIR)/modules_libs/java.base/$JVM_VARIANT_MAIN"
- else
- OPENJDK_BUILD_JAVA_BASE_LDFLAGS="${OPENJDK_BUILD_JAVA_BASE_LDFLAGS} \
- -L\$(SUPPORT_OUTPUTDIR)/modules_libs/java.base/server"
- fi
- elif test "xBUILD" = "xBUILD"; then
- # When building a buildjdk, it's always only the server variant
- OPENJDK_BUILD_JAVA_BASE_LDFLAGS="${OPENJDK_BUILD_JAVA_BASE_LDFLAGS} \
- -L\$(SUPPORT_OUTPUTDIR)/modules_libs/java.base/server"
- fi
-
- OPENJDK_BUILD_JDKLIB_LIBS="-ljava -ljvm"
- if test "x$TOOLCHAIN_TYPE" = xsolstudio; then
- OPENJDK_BUILD_JDKLIB_LIBS="$OPENJDK_BUILD_JDKLIB_LIBS -lc"
- fi
-
- fi
-
-OPENJDK_BUILD_LDFLAGS_JDKLIB="${OPENJDK_BUILD_LDFLAGS_JDKLIB} ${OPENJDK_BUILD_JAVA_BASE_LDFLAGS}"
-
- # Set OPENJDK_BUILD_JVM_LIBS (per os)
- if test "x$OPENJDK_BUILD_OS" = xlinux; then
- OPENJDK_BUILD_JVM_LIBS="$OPENJDK_BUILD_JVM_LIBS -lm -ldl -lpthread"
- elif test "x$OPENJDK_BUILD_OS" = xsolaris; then
- # FIXME: This hard-coded path is not really proper.
- if test "x$OPENJDK_BUILD_CPU" = xx86_64; then
- OPENJDK_BUILD_SOLARIS_LIBM_LIBS="/usr/lib/amd64/libm.so.1"
- elif test "x$OPENJDK_BUILD_CPU" = xsparcv9; then
- OPENJDK_BUILD_SOLARIS_LIBM_LIBS="/usr/lib/sparcv9/libm.so.1"
- fi
- OPENJDK_BUILD_JVM_LIBS="$OPENJDK_BUILD_JVM_LIBS -lsocket -lsched -ldl $SOLARIS_LIBM_LIBS -lCrun \
- -lthread -ldoor -lc -ldemangle -lnsl -lrt"
- elif test "x$OPENJDK_BUILD_OS" = xmacosx; then
- OPENJDK_BUILD_JVM_LIBS="$OPENJDK_BUILD_JVM_LIBS -lm"
- elif test "x$OPENJDK_BUILD_OS" = xaix; then
- OPENJDK_BUILD_JVM_LIBS="$OPENJDK_BUILD_JVM_LIBS -Wl,-lC_r -lm -ldl -lpthread"
- elif test "x$OPENJDK_BUILD_OS" = xbsd; then
- OPENJDK_BUILD_JVM_LIBS="$OPENJDK_BUILD_JVM_LIBS -lm"
- elif test "x$OPENJDK_BUILD_OS" = xwindows; then
- OPENJDK_BUILD_JVM_LIBS="$OPENJDK_BUILD_JVM_LIBS kernel32.lib user32.lib gdi32.lib winspool.lib \
- comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib \
- wsock32.lib winmm.lib version.lib psapi.lib"
- fi
-
- # Set OPENJDK_BUILD_JVM_ASFLAGS
- if test "x$OPENJDK_BUILD_OS" = xlinux; then
- if test "x$OPENJDK_BUILD_CPU" = xx86; then
- OPENJDK_BUILD_JVM_ASFLAGS="$OPENJDK_BUILD_JVM_ASFLAGS -march=i586"
- fi
- elif test "x$OPENJDK_BUILD_OS" = xmacosx; then
- OPENJDK_BUILD_JVM_ASFLAGS="$OPENJDK_BUILD_JVM_ASFLAGS -x assembler-with-cpp -mno-omit-leaf-frame-pointer -mstack-alignment=16"
- fi
-
- OPENJDK_BUILD_LDFLAGS_JDKLIB="${OPENJDK_BUILD_LDFLAGS_JDKLIB} ${OPENJDK_BUILD_EXTRA_LDFLAGS_JDK}"
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- # Tests are only ever compiled for TARGET
- # Flags for compiling test libraries
- CFLAGS_TESTLIB="$COMMON_CCXXFLAGS_JDK $CFLAGS_JDK $PICFLAG $CFLAGS_JDKLIB_EXTRA"
- CXXFLAGS_TESTLIB="$COMMON_CCXXFLAGS_JDK $CXXFLAGS_JDK $PICFLAG $CXXFLAGS_JDKLIB_EXTRA"
-
- # Flags for compiling test executables
- CFLAGS_TESTEXE="$COMMON_CCXXFLAGS_JDK $CFLAGS_JDK"
- CXXFLAGS_TESTEXE="$COMMON_CCXXFLAGS_JDK $CXXFLAGS_JDK"
-
-
-
-
-
-
- LDFLAGS_TESTLIB="$LDFLAGS_JDKLIB"
- LDFLAGS_TESTEXE="$LDFLAGS_JDKEXE $JAVA_BASE_LDFLAGS"
-
-
-
-
-
-
- # Check that the compiler supports -mX (or -qX on AIX) flags
- # Set COMPILER_SUPPORTS_TARGET_BITS_FLAG to 'true' if it does
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- # Execute function body
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- # Execute function body
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if the C compiler supports \"${COMPILER_TARGET_BITS_FLAG}${OPENJDK_TARGET_CPU_BITS}\"" >&5
-$as_echo_n "checking if the C compiler supports \"${COMPILER_TARGET_BITS_FLAG}${OPENJDK_TARGET_CPU_BITS}\"... " >&6; }
- supports=yes
-
- saved_cflags="$CFLAGS"
- CFLAGS="$CFLAGS ${COMPILER_TARGET_BITS_FLAG}${OPENJDK_TARGET_CPU_BITS}"
- ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-int i;
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-
-else
- supports=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
- CFLAGS="$saved_cflags"
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $supports" >&5
-$as_echo "$supports" >&6; }
- if test "x$supports" = "xyes" ; then
- :
- C_COMP_SUPPORTS="yes"
- else
- :
- C_COMP_SUPPORTS="no"
- fi
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- # Execute function body
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if the C++ compiler supports \"${COMPILER_TARGET_BITS_FLAG}${OPENJDK_TARGET_CPU_BITS}\"" >&5
-$as_echo_n "checking if the C++ compiler supports \"${COMPILER_TARGET_BITS_FLAG}${OPENJDK_TARGET_CPU_BITS}\"... " >&6; }
- supports=yes
-
- saved_cxxflags="$CXXFLAGS"
- CXXFLAGS="$CXXFLAG ${COMPILER_TARGET_BITS_FLAG}${OPENJDK_TARGET_CPU_BITS}"
- ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-int i;
-_ACEOF
-if ac_fn_cxx_try_compile "$LINENO"; then :
-
-else
- supports=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
- CXXFLAGS="$saved_cxxflags"
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $supports" >&5
-$as_echo "$supports" >&6; }
- if test "x$supports" = "xyes" ; then
- :
- CXX_COMP_SUPPORTS="yes"
- else
- :
- CXX_COMP_SUPPORTS="no"
- fi
-
-
-
-
-
-
-
-
-
-
-
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if both compilers support \"${COMPILER_TARGET_BITS_FLAG}${OPENJDK_TARGET_CPU_BITS}\"" >&5
-$as_echo_n "checking if both compilers support \"${COMPILER_TARGET_BITS_FLAG}${OPENJDK_TARGET_CPU_BITS}\"... " >&6; }
- supports=no
- if test "x$C_COMP_SUPPORTS" = "xyes" -a "x$CXX_COMP_SUPPORTS" = "xyes"; then supports=yes; fi
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $supports" >&5
-$as_echo "$supports" >&6; }
- if test "x$supports" = "xyes" ; then
- :
- COMPILER_SUPPORTS_TARGET_BITS_FLAG=true
- else
- :
- COMPILER_SUPPORTS_TARGET_BITS_FLAG=false
- fi
-
-
-
-
-
-
-
-
- # Check whether --enable-warnings-as-errors was given.
-if test "${enable_warnings_as_errors+set}" = set; then :
- enableval=$enable_warnings_as_errors;
-fi
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if native warnings are errors" >&5
-$as_echo_n "checking if native warnings are errors... " >&6; }
- if test "x$enable_warnings_as_errors" = "xyes"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes (explicitly set)" >&5
-$as_echo "yes (explicitly set)" >&6; }
- WARNINGS_AS_ERRORS=true
- elif test "x$enable_warnings_as_errors" = "xno"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- WARNINGS_AS_ERRORS=false
- elif test "x$enable_warnings_as_errors" = "x"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes (default)" >&5
-$as_echo "yes (default)" >&6; }
- WARNINGS_AS_ERRORS=true
- else
- as_fn_error $? "--enable-warnings-as-errors accepts no argument" "$LINENO" 5
- fi
-
-
-
- case "${TOOLCHAIN_TYPE}" in
- microsoft)
- DISABLE_WARNING_PREFIX="-wd"
- CFLAGS_WARNINGS_ARE_ERRORS="-WX"
- ;;
- solstudio)
- DISABLE_WARNING_PREFIX="-erroff="
- CFLAGS_WARNINGS_ARE_ERRORS="-errtags -errwarn=%all"
- ;;
- gcc)
- # Prior to gcc 4.4, a -Wno-X where X is unknown for that version of gcc will cause an error
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- # Execute function body
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- # Execute function body
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if the C compiler supports \"-Wno-this-is-a-warning-that-do-not-exist\"" >&5
-$as_echo_n "checking if the C compiler supports \"-Wno-this-is-a-warning-that-do-not-exist\"... " >&6; }
- supports=yes
-
- saved_cflags="$CFLAGS"
- CFLAGS="$CFLAGS -Wno-this-is-a-warning-that-do-not-exist"
- ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-int i;
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-
-else
- supports=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
- CFLAGS="$saved_cflags"
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $supports" >&5
-$as_echo "$supports" >&6; }
- if test "x$supports" = "xyes" ; then
- :
- C_COMP_SUPPORTS="yes"
- else
- :
- C_COMP_SUPPORTS="no"
- fi
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- # Execute function body
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if the C++ compiler supports \"-Wno-this-is-a-warning-that-do-not-exist\"" >&5
-$as_echo_n "checking if the C++ compiler supports \"-Wno-this-is-a-warning-that-do-not-exist\"... " >&6; }
- supports=yes
-
- saved_cxxflags="$CXXFLAGS"
- CXXFLAGS="$CXXFLAG -Wno-this-is-a-warning-that-do-not-exist"
- ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-int i;
-_ACEOF
-if ac_fn_cxx_try_compile "$LINENO"; then :
-
-else
- supports=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
- CXXFLAGS="$saved_cxxflags"
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $supports" >&5
-$as_echo "$supports" >&6; }
- if test "x$supports" = "xyes" ; then
- :
- CXX_COMP_SUPPORTS="yes"
- else
- :
- CXX_COMP_SUPPORTS="no"
- fi
-
-
-
-
-
-
-
-
-
-
-
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if both compilers support \"-Wno-this-is-a-warning-that-do-not-exist\"" >&5
-$as_echo_n "checking if both compilers support \"-Wno-this-is-a-warning-that-do-not-exist\"... " >&6; }
- supports=no
- if test "x$C_COMP_SUPPORTS" = "xyes" -a "x$CXX_COMP_SUPPORTS" = "xyes"; then supports=yes; fi
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $supports" >&5
-$as_echo "$supports" >&6; }
- if test "x$supports" = "xyes" ; then
- :
- GCC_CAN_DISABLE_WARNINGS=true
- else
- :
- GCC_CAN_DISABLE_WARNINGS=false
-
- fi
-
-
-
-
-
-
- if test "x$GCC_CAN_DISABLE_WARNINGS" = "xtrue"; then
- DISABLE_WARNING_PREFIX="-Wno-"
- else
- DISABLE_WARNING_PREFIX=
- fi
- CFLAGS_WARNINGS_ARE_ERRORS="-Werror"
- # Repeate the check for the BUILD_CC and BUILD_CXX. Need to also reset
- # CFLAGS since any target specific flags will likely not work with the
- # build compiler
- CC_OLD="$CC"
- CXX_OLD="$CXX"
- CC="$BUILD_CC"
- CXX="$BUILD_CXX"
- CFLAGS_OLD="$CFLAGS"
- CFLAGS=""
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- # Execute function body
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- # Execute function body
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if the C compiler supports \"-Wno-this-is-a-warning-that-do-not-exist\"" >&5
-$as_echo_n "checking if the C compiler supports \"-Wno-this-is-a-warning-that-do-not-exist\"... " >&6; }
- supports=yes
-
- saved_cflags="$CFLAGS"
- CFLAGS="$CFLAGS -Wno-this-is-a-warning-that-do-not-exist"
- ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-int i;
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-
-else
- supports=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
- CFLAGS="$saved_cflags"
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $supports" >&5
-$as_echo "$supports" >&6; }
- if test "x$supports" = "xyes" ; then
- :
- C_COMP_SUPPORTS="yes"
- else
- :
- C_COMP_SUPPORTS="no"
- fi
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- # Execute function body
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if the C++ compiler supports \"-Wno-this-is-a-warning-that-do-not-exist\"" >&5
-$as_echo_n "checking if the C++ compiler supports \"-Wno-this-is-a-warning-that-do-not-exist\"... " >&6; }
- supports=yes
-
- saved_cxxflags="$CXXFLAGS"
- CXXFLAGS="$CXXFLAG -Wno-this-is-a-warning-that-do-not-exist"
- ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-int i;
-_ACEOF
-if ac_fn_cxx_try_compile "$LINENO"; then :
-
-else
- supports=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
- CXXFLAGS="$saved_cxxflags"
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $supports" >&5
-$as_echo "$supports" >&6; }
- if test "x$supports" = "xyes" ; then
- :
- CXX_COMP_SUPPORTS="yes"
- else
- :
- CXX_COMP_SUPPORTS="no"
- fi
-
-
-
-
-
-
-
-
-
-
-
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if both compilers support \"-Wno-this-is-a-warning-that-do-not-exist\"" >&5
-$as_echo_n "checking if both compilers support \"-Wno-this-is-a-warning-that-do-not-exist\"... " >&6; }
- supports=no
- if test "x$C_COMP_SUPPORTS" = "xyes" -a "x$CXX_COMP_SUPPORTS" = "xyes"; then supports=yes; fi
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $supports" >&5
-$as_echo "$supports" >&6; }
- if test "x$supports" = "xyes" ; then
- :
- BUILD_CC_CAN_DISABLE_WARNINGS=true
- else
- :
- BUILD_CC_CAN_DISABLE_WARNINGS=false
-
- fi
-
-
-
-
-
-
- if test "x$BUILD_CC_CAN_DISABLE_WARNINGS" = "xtrue"; then
- BUILD_CC_DISABLE_WARNING_PREFIX="-Wno-"
- else
- BUILD_CC_DISABLE_WARNING_PREFIX=
- fi
- CC="$CC_OLD"
- CXX="$CXX_OLD"
- CFLAGS="$CFLAGS_OLD"
- ;;
- clang)
- DISABLE_WARNING_PREFIX="-Wno-"
- CFLAGS_WARNINGS_ARE_ERRORS="-Werror"
- ;;
- xlc)
- DISABLE_WARNING_PREFIX="-qsuppress="
- CFLAGS_WARNINGS_ARE_ERRORS="-qhalt=w"
- ;;
- esac
-
-
-
-
-
-# Setup debug symbols (need objcopy from the toolchain for that)
-
- #
- # NATIVE_DEBUG_SYMBOLS
- # This must be done after the toolchain is setup, since we're looking at objcopy.
- #
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking what type of native debug symbols to use" >&5
-$as_echo_n "checking what type of native debug symbols to use... " >&6; }
-
-# Check whether --with-native-debug-symbols was given.
-if test "${with_native_debug_symbols+set}" = set; then :
- withval=$with_native_debug_symbols;
- if test "x$OPENJDK_TARGET_OS" = xaix; then
- if test "x$withval" = xexternal || test "x$withval" = xzipped; then
- as_fn_error $? "AIX only supports the parameters 'none' and 'internal' for --with-native-debug-symbols" "$LINENO" 5
- fi
- fi
-
-else
-
- if test "x$OPENJDK_TARGET_OS" = xaix; then
- # AIX doesn't support 'external' so use 'internal' as default
- with_native_debug_symbols="internal"
- else
- if test "x$STATIC_BUILD" = xtrue; then
- with_native_debug_symbols="none"
- else
- with_native_debug_symbols="external"
- fi
- fi
-
-fi
-
- NATIVE_DEBUG_SYMBOLS=$with_native_debug_symbols
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NATIVE_DEBUG_SYMBOLS" >&5
-$as_echo "$NATIVE_DEBUG_SYMBOLS" >&6; }
-
- if test "x$NATIVE_DEBUG_SYMBOLS" = xzipped; then
-
- if test "x$OPENJDK_TARGET_OS" = xsolaris || test "x$OPENJDK_TARGET_OS" = xlinux; then
- if test "x$OBJCOPY" = x; then
- # enabling of enable-debug-symbols and can't find objcopy
- # this is an error
- as_fn_error $? "Unable to find objcopy, cannot enable native debug symbols" "$LINENO" 5
- fi
- fi
-
- COMPILE_WITH_DEBUG_SYMBOLS=true
- COPY_DEBUG_SYMBOLS=true
- ZIP_EXTERNAL_DEBUG_SYMBOLS=true
- elif test "x$NATIVE_DEBUG_SYMBOLS" = xnone; then
- COMPILE_WITH_DEBUG_SYMBOLS=false
- COPY_DEBUG_SYMBOLS=false
- ZIP_EXTERNAL_DEBUG_SYMBOLS=false
- elif test "x$NATIVE_DEBUG_SYMBOLS" = xinternal; then
- COMPILE_WITH_DEBUG_SYMBOLS=true
- COPY_DEBUG_SYMBOLS=false
- ZIP_EXTERNAL_DEBUG_SYMBOLS=false
- elif test "x$NATIVE_DEBUG_SYMBOLS" = xexternal; then
-
- if test "x$OPENJDK_TARGET_OS" = xsolaris || test "x$OPENJDK_TARGET_OS" = xlinux; then
- if test "x$OBJCOPY" = x; then
- # enabling of enable-debug-symbols and can't find objcopy
- # this is an error
- as_fn_error $? "Unable to find objcopy, cannot enable native debug symbols" "$LINENO" 5
- fi
- fi
-
- COMPILE_WITH_DEBUG_SYMBOLS=true
- COPY_DEBUG_SYMBOLS=true
- ZIP_EXTERNAL_DEBUG_SYMBOLS=false
- else
- as_fn_error $? "Allowed native debug symbols are: none, internal, external, zipped" "$LINENO" 5
- fi
-
- # --enable-debug-symbols is deprecated.
- # Please use --with-native-debug-symbols=[internal,external,zipped] .
-
- # Check whether --enable-debug-symbols was given.
-if test "${enable_debug_symbols+set}" = set; then :
- enableval=$enable_debug_symbols;
-fi
-
- if test "x$enable_debug_symbols" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Option --enable-debug-symbols is deprecated and will be ignored." >&5
-$as_echo "$as_me: WARNING: Option --enable-debug-symbols is deprecated and will be ignored." >&2;}
-
- if test "xPlease use --with-native-debug-symbols=[internal,external,zipped] ." != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Please use --with-native-debug-symbols=[internal,external,zipped] ." >&5
-$as_echo "$as_me: WARNING: Please use --with-native-debug-symbols=[internal,external,zipped] ." >&2;}
- fi
-
- fi
-
-
- # --enable-zip-debug-info is deprecated.
- # Please use --with-native-debug-symbols=zipped .
-
- # Check whether --enable-zip-debug-info was given.
-if test "${enable_zip_debug_info+set}" = set; then :
- enableval=$enable_zip_debug_info;
-fi
-
- if test "x$enable_zip_debug_info" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Option --enable-zip-debug-info is deprecated and will be ignored." >&5
-$as_echo "$as_me: WARNING: Option --enable-zip-debug-info is deprecated and will be ignored." >&2;}
-
- if test "xPlease use --with-native-debug-symbols=zipped ." != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Please use --with-native-debug-symbols=zipped ." >&5
-$as_echo "$as_me: WARNING: Please use --with-native-debug-symbols=zipped ." >&2;}
- fi
-
- fi
-
-
-
-
-
-
-
- # Check whether --enable-native-coverage was given.
-if test "${enable_native_coverage+set}" = set; then :
- enableval=$enable_native_coverage;
-fi
-
- GCOV_ENABLED="false"
- if test "x$enable_native_coverage" = "xyes"; then
- if test "x$TOOLCHAIN_TYPE" = "xgcc"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if native coverage is enabled" >&5
-$as_echo_n "checking if native coverage is enabled... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
- GCOV_CFLAGS="-fprofile-arcs -ftest-coverage -fno-inline"
- GCOV_LDFLAGS="-fprofile-arcs"
- JVM_CFLAGS="$JVM_CFLAGS $GCOV_CFLAGS"
- JVM_LDFLAGS="$JVM_LDFLAGS $GCOV_LDFLAGS"
- CFLAGS_JDKLIB="$CFLAGS_JDKLIB $GCOV_CFLAGS"
- CFLAGS_JDKEXE="$CFLAGS_JDKEXE $GCOV_CFLAGS"
- CXXFLAGS_JDKLIB="$CXXFLAGS_JDKLIB $GCOV_CFLAGS"
- CXXFLAGS_JDKEXE="$CXXFLAGS_JDKEXE $GCOV_CFLAGS"
- LDFLAGS_JDKLIB="$LDFLAGS_JDKLIB $GCOV_LDFLAGS"
- LDFLAGS_JDKEXE="$LDFLAGS_JDKEXE $GCOV_LDFLAGS"
- GCOV_ENABLED="true"
- else
- as_fn_error $? "--enable-native-coverage only works with toolchain type gcc" "$LINENO" 5
- fi
- elif test "x$enable_native_coverage" = "xno"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if native coverage is enabled" >&5
-$as_echo_n "checking if native coverage is enabled... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- elif test "x$enable_native_coverage" != "x"; then
- as_fn_error $? "--enable-native-coverage can only be assigned \"yes\" or \"no\"" "$LINENO" 5
- fi
-
-
-
-
-# AddressSanitizer
-
- # Check whether --enable-asan was given.
-if test "${enable_asan+set}" = set; then :
- enableval=$enable_asan;
-fi
-
- ASAN_ENABLED="no"
- if test "x$enable_asan" = "xyes"; then
- case $TOOLCHAIN_TYPE in
- gcc | clang)
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if asan is enabled" >&5
-$as_echo_n "checking if asan is enabled... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
- ASAN_CFLAGS="-fsanitize=address -fno-omit-frame-pointer"
- ASAN_LDFLAGS="-fsanitize=address"
- JVM_CFLAGS="$JVM_CFLAGS $ASAN_CFLAGS"
- JVM_LDFLAGS="$JVM_LDFLAGS $ASAN_LDFLAGS"
- CFLAGS_JDKLIB="$CFLAGS_JDKLIB $ASAN_CFLAGS"
- CFLAGS_JDKEXE="$CFLAGS_JDKEXE $ASAN_CFLAGS"
- CXXFLAGS_JDKLIB="$CXXFLAGS_JDKLIB $ASAN_CFLAGS"
- CXXFLAGS_JDKEXE="$CXXFLAGS_JDKEXE $ASAN_CFLAGS"
- LDFLAGS_JDKLIB="$LDFLAGS_JDKLIB $ASAN_LDFLAGS"
- LDFLAGS_JDKEXE="$LDFLAGS_JDKEXE $ASAN_LDFLAGS"
- ASAN_ENABLED="yes"
- ;;
- *)
- as_fn_error $? "--enable-asan only works with toolchain type gcc or clang" "$LINENO" 5
- ;;
- esac
- elif test "x$enable_asan" = "xno"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if asan is enabled" >&5
-$as_echo_n "checking if asan is enabled... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- elif test "x$enable_asan" != "x"; then
- as_fn_error $? "--enable-asan can only be assigned \"yes\" or \"no\"" "$LINENO" 5
- fi
-
-
-
-
-# Need toolchain to setup dtrace
-
- # Test for dtrace dependencies
- # Check whether --enable-dtrace was given.
-if test "${enable_dtrace+set}" = set; then :
- enableval=$enable_dtrace;
-fi
-
-
- DTRACE_DEP_MISSING=false
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dtrace tool" >&5
-$as_echo_n "checking for dtrace tool... " >&6; }
- if test "x$DTRACE" != "x" && test -x "$DTRACE"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DTRACE" >&5
-$as_echo "$DTRACE" >&6; }
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found, cannot build dtrace" >&5
-$as_echo "not found, cannot build dtrace" >&6; }
- DTRACE_DEP_MISSING=true
- fi
-
- for ac_header in sys/sdt.h
-do :
- ac_fn_cxx_check_header_mongrel "$LINENO" "sys/sdt.h" "ac_cv_header_sys_sdt_h" "$ac_includes_default"
-if test "x$ac_cv_header_sys_sdt_h" = xyes; then :
- cat >>confdefs.h <<_ACEOF
-#define HAVE_SYS_SDT_H 1
-_ACEOF
- DTRACE_HEADERS_OK=yes
-else
- DTRACE_HEADERS_OK=no
-fi
-
-done
-
- if test "x$DTRACE_HEADERS_OK" != "xyes"; then
- DTRACE_DEP_MISSING=true
- fi
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if dtrace should be built" >&5
-$as_echo_n "checking if dtrace should be built... " >&6; }
- if test "x$enable_dtrace" = "xyes"; then
- if test "x$DTRACE_DEP_MISSING" = "xtrue"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, missing dependencies" >&5
-$as_echo "no, missing dependencies" >&6; }
-
- # Print a helpful message on how to acquire the necessary build dependency.
- # dtrace is the help tag: freetype, cups, alsa etc
- MISSING_DEPENDENCY=dtrace
-
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- cygwin_help $MISSING_DEPENDENCY
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- msys_help $MISSING_DEPENDENCY
- else
- PKGHANDLER_COMMAND=
-
- case $PKGHANDLER in
- apt-get)
- apt_help $MISSING_DEPENDENCY ;;
- yum)
- yum_help $MISSING_DEPENDENCY ;;
- brew)
- brew_help $MISSING_DEPENDENCY ;;
- port)
- port_help $MISSING_DEPENDENCY ;;
- pkgutil)
- pkgutil_help $MISSING_DEPENDENCY ;;
- pkgadd)
- pkgadd_help $MISSING_DEPENDENCY ;;
- esac
-
- if test "x$PKGHANDLER_COMMAND" != x; then
- HELP_MSG="You might be able to fix this by running '$PKGHANDLER_COMMAND'."
- fi
- fi
-
- as_fn_error $? "Cannot enable dtrace with missing dependencies. See above. $HELP_MSG" "$LINENO" 5
- else
- INCLUDE_DTRACE=true
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes, forced" >&5
-$as_echo "yes, forced" >&6; }
- fi
- elif test "x$enable_dtrace" = "xno"; then
- INCLUDE_DTRACE=false
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, forced" >&5
-$as_echo "no, forced" >&6; }
- elif test "x$enable_dtrace" = "xauto" || test "x$enable_dtrace" = "x"; then
- if test "x$DTRACE_DEP_MISSING" = "xtrue"; then
- INCLUDE_DTRACE=false
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, missing dependencies" >&5
-$as_echo "no, missing dependencies" >&6; }
- else
- INCLUDE_DTRACE=true
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes, dependencies present" >&5
-$as_echo "yes, dependencies present" >&6; }
- fi
- else
- as_fn_error $? "Invalid value for --enable-dtrace: $enable_dtrace" "$LINENO" 5
- fi
-
-
- # Check whether --enable-aot was given.
-if test "${enable_aot+set}" = set; then :
- enableval=$enable_aot;
-fi
-
-
- if test "x$enable_aot" = "x" || test "x$enable_aot" = "xauto"; then
- ENABLE_AOT="true"
- elif test "x$enable_aot" = "xyes"; then
- ENABLE_AOT="true"
- elif test "x$enable_aot" = "xno"; then
- ENABLE_AOT="false"
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if aot should be enabled" >&5
-$as_echo_n "checking if aot should be enabled... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, forced" >&5
-$as_echo "no, forced" >&6; }
- else
- as_fn_error $? "Invalid value for --enable-aot: $enable_aot" "$LINENO" 5
- fi
-
- if test "x$ENABLE_AOT" = "xtrue"; then
- # Only enable AOT on X64 platforms.
- if test "x$OPENJDK_TARGET_CPU" = "xx86_64"; then
- if test -e "${TOPDIR}/src/jdk.aot"; then
- if test -e "${TOPDIR}/src/jdk.internal.vm.compiler"; then
- ENABLE_AOT="true"
- else
- ENABLE_AOT="false"
- if test "x$enable_aot" = "xyes"; then
- as_fn_error $? "Cannot build AOT without src/jdk.internal.vm.compiler sources. Remove --enable-aot." "$LINENO" 5
- fi
- fi
- else
- ENABLE_AOT="false"
- if test "x$enable_aot" = "xyes"; then
- as_fn_error $? "Cannot build AOT without src/jdk.aot sources. Remove --enable-aot." "$LINENO" 5
- fi
- fi
- else
- ENABLE_AOT="false"
- if test "x$enable_aot" = "xyes"; then
- as_fn_error $? "AOT is currently only supported on x86_64. Remove --enable-aot." "$LINENO" 5
- fi
- fi
- fi
-
-
-
-
- # Check whether --enable-cds was given.
-if test "${enable_cds+set}" = set; then :
- enableval=$enable_cds;
-fi
-
-
- if test "x$enable_cds" = "x" || test "x$enable_cds" = "xyes"; then
- ENABLE_CDS="true"
- elif test "x$enable_cds" = "xno"; then
- ENABLE_CDS="false"
- else
- as_fn_error $? "Invalid value for --enable-cds: $enable_cds" "$LINENO" 5
- fi
-
-
-
-
- # Check whether --enable-hotspot-gtest was given.
-if test "${enable_hotspot_gtest+set}" = set; then :
- enableval=$enable_hotspot_gtest;
-fi
-
-
- if test -e "${TOPDIR}/test/hotspot/gtest"; then
- GTEST_DIR_EXISTS="true"
- else
- GTEST_DIR_EXISTS="false"
- fi
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if Hotspot gtest unit tests should be built" >&5
-$as_echo_n "checking if Hotspot gtest unit tests should be built... " >&6; }
- if test "x$enable_hotspot_gtest" = "xyes"; then
- if test "x$GTEST_DIR_EXISTS" = "xtrue"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes, forced" >&5
-$as_echo "yes, forced" >&6; }
- BUILD_GTEST="true"
- else
- as_fn_error $? "Cannot build gtest without the test source" "$LINENO" 5
- fi
- elif test "x$enable_hotspot_gtest" = "xno"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, forced" >&5
-$as_echo "no, forced" >&6; }
- BUILD_GTEST="false"
- elif test "x$enable_hotspot_gtest" = "x"; then
- if test "x$GTEST_DIR_EXISTS" = "xtrue"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
- BUILD_GTEST="true"
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- BUILD_GTEST="false"
- fi
- else
- as_fn_error $? "--enable-gtest must be either yes or no" "$LINENO" 5
- fi
-
-
-
-
-###############################################################################
-#
-# Check dependencies for external and internal libraries.
-#
-###############################################################################
-
-# After we have toolchain, we can compile fixpath. It's needed by the lib checks.
-
- # When using cygwin or msys, we need a wrapper binary that renames
- # /cygdrive/c/ arguments into c:/ arguments and peeks into
- # @files and rewrites these too! This wrapper binary is
- # called fixpath.
- FIXPATH=
- if test "x$OPENJDK_BUILD_OS" = xwindows; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if fixpath can be created" >&5
-$as_echo_n "checking if fixpath can be created... " >&6; }
- FIXPATH_SRC="$TOPDIR/make/src/native/fixpath.c"
- FIXPATH_BIN="$CONFIGURESUPPORT_OUTPUTDIR/bin/fixpath.exe"
- FIXPATH_DIR="$CONFIGURESUPPORT_OUTPUTDIR/fixpath"
- if test "x$OPENJDK_BUILD_OS_ENV" = xwindows.cygwin; then
- # Important to keep the .exe suffix on Cygwin for Hotspot makefiles
- FIXPATH="$FIXPATH_BIN -c"
- elif test "x$OPENJDK_BUILD_OS_ENV" = xwindows.msys; then
- # Take all collected prefixes and turn them into a -m/c/foo@/c/bar@... command line
- # @ was chosen as separator to minimize risk of other tools messing around with it
- all_unique_prefixes=`echo "${all_fixpath_prefixes[@]}" \
- | tr ' ' '\n' | $GREP '^/./' | $SORT | $UNIQ`
- fixpath_argument_list=`echo $all_unique_prefixes | tr ' ' '@'`
- FIXPATH="$FIXPATH_BIN -m$fixpath_argument_list"
- fi
- FIXPATH_SRC_W="$FIXPATH_SRC"
- FIXPATH_BIN_W="$FIXPATH_BIN"
-
- unix_path="$FIXPATH_SRC_W"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- windows_path=`$CYGPATH -m "$unix_path"`
- FIXPATH_SRC_W="$windows_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- windows_path=`cmd //c echo $unix_path`
- FIXPATH_SRC_W="$windows_path"
- fi
-
-
- unix_path="$FIXPATH_BIN_W"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- windows_path=`$CYGPATH -m "$unix_path"`
- FIXPATH_BIN_W="$windows_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- windows_path=`cmd //c echo $unix_path`
- FIXPATH_BIN_W="$windows_path"
- fi
-
- $RM -rf $FIXPATH_BIN $FIXPATH_DIR
- $MKDIR -p $FIXPATH_DIR $CONFIGURESUPPORT_OUTPUTDIR/bin
- cd $FIXPATH_DIR
- $CC $FIXPATH_SRC_W -Fe$FIXPATH_BIN_W > $FIXPATH_DIR/fixpath1.log 2>&1
- cd $CURDIR
-
- if test ! -x $FIXPATH_BIN; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- cat $FIXPATH_DIR/fixpath1.log
- as_fn_error $? "Could not create $FIXPATH_BIN" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if fixpath.exe works" >&5
-$as_echo_n "checking if fixpath.exe works... " >&6; }
- cd $FIXPATH_DIR
- $FIXPATH $CC $FIXPATH_SRC -Fe$FIXPATH_DIR/fixpath2.exe \
- > $FIXPATH_DIR/fixpath2.log 2>&1
- cd $CURDIR
- if test ! -x $FIXPATH_DIR/fixpath2.exe; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- cat $FIXPATH_DIR/fixpath2.log
- as_fn_error $? "fixpath did not work!" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-
- FIXPATH_DETACH_FLAG="--detach"
- fi
-
-
-
-
-
-
- # Check if X11 is needed
- if test "x$OPENJDK_TARGET_OS" = xwindows || test "x$OPENJDK_TARGET_OS" = xmacosx; then
- # No X11 support on windows or macosx
- NEEDS_LIB_X11=false
- else
- # All other instances need X11, even if building headless only, libawt still
- # needs X11 headers.
- NEEDS_LIB_X11=true
- fi
-
- # Check if fontconfig is needed
- if test "x$OPENJDK_TARGET_OS" = xwindows || test "x$OPENJDK_TARGET_OS" = xmacosx; then
- # No fontconfig support on windows or macosx
- NEEDS_LIB_FONTCONFIG=false
- else
- # All other instances need fontconfig, even if building headless only,
- # libawt still needs fontconfig headers.
- NEEDS_LIB_FONTCONFIG=true
- fi
-
- # Check if cups is needed
- if test "x$OPENJDK_TARGET_OS" = xwindows; then
- # Windows have a separate print system
- NEEDS_LIB_CUPS=false
- else
- NEEDS_LIB_CUPS=true
- fi
-
- # A custom hook may have set this already
- if test "x$NEEDS_LIB_FREETYPE" = "x"; then
- NEEDS_LIB_FREETYPE=true
- fi
-
- # Check if alsa is needed
- if test "x$OPENJDK_TARGET_OS" = xlinux; then
- NEEDS_LIB_ALSA=true
- else
- NEEDS_LIB_ALSA=false
- fi
-
- # Check if ffi is needed
- if [[ " $JVM_VARIANTS " =~ " zero " ]] ; then
- NEEDS_LIB_FFI=true
- else
- NEEDS_LIB_FFI=false
- fi
-
-
- # statically link libstdc++ before C++ ABI is stablized on Linux unless
- # dynamic build is configured on command line.
-
-# Check whether --with-stdc++lib was given.
-if test "${with_stdc__lib+set}" = set; then :
- withval=$with_stdc__lib;
- if test "x$with_stdc__lib" != xdynamic && test "x$with_stdc__lib" != xstatic \
- && test "x$with_stdc__lib" != xdefault; then
- as_fn_error $? "Bad parameter value --with-stdc++lib=$with_stdc__lib!" "$LINENO" 5
- fi
-
-else
- with_stdc__lib=default
-
-fi
-
-
- if test "x$OPENJDK_TARGET_OS" = xlinux; then
- # Test if stdc++ can be linked statically.
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if static link of stdc++ is possible" >&5
-$as_echo_n "checking if static link of stdc++ is possible... " >&6; }
- STATIC_STDCXX_FLAGS="-static-libstdc++ -static-libgcc"
- ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
- OLD_LIBS="$LIBS"
- LIBS="$STATIC_STDCXX_FLAGS"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-return 0;
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_cxx_try_link "$LINENO"; then :
- has_static_libstdcxx=yes
-else
- has_static_libstdcxx=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
- LIBS="$OLD_LIBS"
- ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $has_static_libstdcxx" >&5
-$as_echo "$has_static_libstdcxx" >&6; }
-
- if test "x$with_stdc__lib" = xstatic && test "x$has_static_libstdcxx" = xno; then
- as_fn_error $? "Static linking of libstdc++ was not possible!" "$LINENO" 5
- fi
-
- # If dynamic was requested, it's available since it would fail above otherwise.
- # If dynamic wasn't requested, go with static unless it isn't available.
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to link with libstdc++" >&5
-$as_echo_n "checking how to link with libstdc++... " >&6; }
- if test "x$with_stdc__lib" = xdynamic || test "x$has_static_libstdcxx" = xno ; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: dynamic" >&5
-$as_echo "dynamic" >&6; }
- else
- LIBCXX="$LIBCXX $STATIC_STDCXX_FLAGS"
- JVM_LDFLAGS="$JVM_LDFLAGS $STATIC_STDCXX_FLAGS"
- # Ideally, we should test stdc++ for the BUILD toolchain separately. For now
- # just use the same setting as for the TARGET toolchain.
- OPENJDK_BUILD_JVM_LDFLAGS="$OPENJDK_BUILD_JVM_LDFLAGS $STATIC_STDCXX_FLAGS"
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: static" >&5
-$as_echo "static" >&6; }
- fi
- fi
-
- # libCrun is the c++ runtime-library with SunStudio (roughly the equivalent of gcc's libstdc++.so)
- if test "x$TOOLCHAIN_TYPE" = xsolstudio && test "x$LIBCXX" = x; then
- LIBCXX="${SYSROOT}/usr/lib${OPENJDK_TARGET_CPU_ISADIR}/libCrun.so.1"
- fi
-
-
-
- # Setup Windows runtime dlls
- if test "x$OPENJDK_TARGET_OS" = "xwindows"; then
-
-
-# Check whether --with-msvcr-dll was given.
-if test "${with_msvcr_dll+set}" = set; then :
- withval=$with_msvcr_dll;
-fi
-
-
- if test "x$with_msvcr_dll" != x; then
- # If given explicitly by user, do not probe. If not present, fail directly.
-
- DLL_NAME="$MSVCR_NAME"
- POSSIBLE_MSVC_DLL="$with_msvcr_dll"
- METHOD="--with-msvcr-dll"
- if test -n "$POSSIBLE_MSVC_DLL" -a -e "$POSSIBLE_MSVC_DLL"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found $DLL_NAME at $POSSIBLE_MSVC_DLL using $METHOD" >&5
-$as_echo "$as_me: Found $DLL_NAME at $POSSIBLE_MSVC_DLL using $METHOD" >&6;}
-
- # Need to check if the found msvcr is correct architecture
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking found $DLL_NAME architecture" >&5
-$as_echo_n "checking found $DLL_NAME architecture... " >&6; }
- MSVC_DLL_FILETYPE=`$FILE -b "$POSSIBLE_MSVC_DLL"`
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- # The MSYS 'file' command returns "PE32 executable for MS Windows (DLL) (GUI) Intel 80386 32-bit"
- # on x32 and "PE32+ executable for MS Windows (DLL) (GUI) Mono/.Net assembly" on x64 systems.
- if test "x$OPENJDK_TARGET_CPU_BITS" = x32; then
- CORRECT_MSVCR_ARCH="PE32 executable"
- else
- CORRECT_MSVCR_ARCH="PE32+ executable"
- fi
- else
- if test "x$OPENJDK_TARGET_CPU_BITS" = x32; then
- CORRECT_MSVCR_ARCH=386
- else
- CORRECT_MSVCR_ARCH=x86-64
- fi
- fi
- if $ECHO "$MSVC_DLL_FILETYPE" | $GREP "$CORRECT_MSVCR_ARCH" 2>&1 > /dev/null; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
-$as_echo "ok" >&6; }
- MSVC_DLL="$POSSIBLE_MSVC_DLL"
-
- # Only process if variable expands to non-empty
-
- if test "x$MSVC_DLL" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- path="$MSVC_DLL"
- new_path=`$CYGPATH -u "$path"`
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file precense.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Cannot locate the the path of MSVC_DLL" "$LINENO" 5
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
-
- if test "x$path" != "x$new_path"; then
- MSVC_DLL="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting MSVC_DLL to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting MSVC_DLL to \"$new_path\"" >&6;}
- fi
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- path="$MSVC_DLL"
- has_colon=`$ECHO $path | $GREP ^.:`
- new_path="$path"
- if test "x$has_colon" = x; then
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $path`
- fi
-
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- if test "x$path" != "x$new_path"; then
- MSVC_DLL="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting MSVC_DLL to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting MSVC_DLL to \"$new_path\"" >&6;}
- fi
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
-
- else
- # We're on a unix platform. Hooray! :)
- path="$MSVC_DLL"
- has_space=`$ECHO "$path" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
- fi
-
- # Use eval to expand a potential ~
- eval path="$path"
- if test ! -f "$path" && test ! -d "$path"; then
- as_fn_error $? "The path of MSVC_DLL, which resolves as \"$path\", is not found." "$LINENO" 5
- fi
-
- if test -d "$path"; then
- MSVC_DLL="`cd "$path"; $THEPWDCMD -L`"
- else
- dir="`$DIRNAME "$path"`"
- base="`$BASENAME "$path"`"
- MSVC_DLL="`cd "$dir"; $THEPWDCMD -L`/$base"
- fi
- fi
- fi
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $DLL_NAME" >&5
-$as_echo_n "checking for $DLL_NAME... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSVC_DLL" >&5
-$as_echo "$MSVC_DLL" >&6; }
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: incorrect, ignoring" >&5
-$as_echo "incorrect, ignoring" >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: The file type of the located $DLL_NAME is $MSVC_DLL_FILETYPE" >&5
-$as_echo "$as_me: The file type of the located $DLL_NAME is $MSVC_DLL_FILETYPE" >&6;}
- fi
- fi
-
- if test "x$MSVC_DLL" = x; then
- as_fn_error $? "Could not find a proper $MSVCR_NAME as specified by --with-msvcr-dll" "$LINENO" 5
- fi
- MSVCR_DLL="$MSVC_DLL"
- elif test "x$DEVKIT_MSVCR_DLL" != x; then
-
- DLL_NAME="$MSVCR_NAME"
- POSSIBLE_MSVC_DLL="$DEVKIT_MSVCR_DLL"
- METHOD="devkit"
- if test -n "$POSSIBLE_MSVC_DLL" -a -e "$POSSIBLE_MSVC_DLL"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found $DLL_NAME at $POSSIBLE_MSVC_DLL using $METHOD" >&5
-$as_echo "$as_me: Found $DLL_NAME at $POSSIBLE_MSVC_DLL using $METHOD" >&6;}
-
- # Need to check if the found msvcr is correct architecture
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking found $DLL_NAME architecture" >&5
-$as_echo_n "checking found $DLL_NAME architecture... " >&6; }
- MSVC_DLL_FILETYPE=`$FILE -b "$POSSIBLE_MSVC_DLL"`
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- # The MSYS 'file' command returns "PE32 executable for MS Windows (DLL) (GUI) Intel 80386 32-bit"
- # on x32 and "PE32+ executable for MS Windows (DLL) (GUI) Mono/.Net assembly" on x64 systems.
- if test "x$OPENJDK_TARGET_CPU_BITS" = x32; then
- CORRECT_MSVCR_ARCH="PE32 executable"
- else
- CORRECT_MSVCR_ARCH="PE32+ executable"
- fi
- else
- if test "x$OPENJDK_TARGET_CPU_BITS" = x32; then
- CORRECT_MSVCR_ARCH=386
- else
- CORRECT_MSVCR_ARCH=x86-64
- fi
- fi
- if $ECHO "$MSVC_DLL_FILETYPE" | $GREP "$CORRECT_MSVCR_ARCH" 2>&1 > /dev/null; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
-$as_echo "ok" >&6; }
- MSVC_DLL="$POSSIBLE_MSVC_DLL"
-
- # Only process if variable expands to non-empty
-
- if test "x$MSVC_DLL" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- path="$MSVC_DLL"
- new_path=`$CYGPATH -u "$path"`
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file precense.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Cannot locate the the path of MSVC_DLL" "$LINENO" 5
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
-
- if test "x$path" != "x$new_path"; then
- MSVC_DLL="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting MSVC_DLL to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting MSVC_DLL to \"$new_path\"" >&6;}
- fi
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- path="$MSVC_DLL"
- has_colon=`$ECHO $path | $GREP ^.:`
- new_path="$path"
- if test "x$has_colon" = x; then
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $path`
- fi
-
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- if test "x$path" != "x$new_path"; then
- MSVC_DLL="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting MSVC_DLL to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting MSVC_DLL to \"$new_path\"" >&6;}
- fi
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
-
- else
- # We're on a unix platform. Hooray! :)
- path="$MSVC_DLL"
- has_space=`$ECHO "$path" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
- fi
-
- # Use eval to expand a potential ~
- eval path="$path"
- if test ! -f "$path" && test ! -d "$path"; then
- as_fn_error $? "The path of MSVC_DLL, which resolves as \"$path\", is not found." "$LINENO" 5
- fi
-
- if test -d "$path"; then
- MSVC_DLL="`cd "$path"; $THEPWDCMD -L`"
- else
- dir="`$DIRNAME "$path"`"
- base="`$BASENAME "$path"`"
- MSVC_DLL="`cd "$dir"; $THEPWDCMD -L`/$base"
- fi
- fi
- fi
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $DLL_NAME" >&5
-$as_echo_n "checking for $DLL_NAME... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSVC_DLL" >&5
-$as_echo "$MSVC_DLL" >&6; }
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: incorrect, ignoring" >&5
-$as_echo "incorrect, ignoring" >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: The file type of the located $DLL_NAME is $MSVC_DLL_FILETYPE" >&5
-$as_echo "$as_me: The file type of the located $DLL_NAME is $MSVC_DLL_FILETYPE" >&6;}
- fi
- fi
-
- if test "x$MSVC_DLL" = x; then
- as_fn_error $? "Could not find a proper $MSVCR_NAME as specified by devkit" "$LINENO" 5
- fi
- MSVCR_DLL="$MSVC_DLL"
- else
-
- DLL_NAME="${MSVCR_NAME}"
- MSVC_DLL=
-
- if test "x$MSVC_DLL" = x; then
- # Probe: Using well-known location from Visual Studio 10.0
- if test "x$VCINSTALLDIR" != x; then
- CYGWIN_VC_INSTALL_DIR="$VCINSTALLDIR"
-
- windows_path="$CYGWIN_VC_INSTALL_DIR"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- CYGWIN_VC_INSTALL_DIR="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- CYGWIN_VC_INSTALL_DIR="$unix_path"
- fi
-
- if test "x$OPENJDK_TARGET_CPU_BITS" = x64; then
- POSSIBLE_MSVC_DLL="$CYGWIN_VC_INSTALL_DIR/redist/x64/Microsoft.VC${VS_VERSION_INTERNAL}.CRT/$DLL_NAME"
- else
- POSSIBLE_MSVC_DLL="$CYGWIN_VC_INSTALL_DIR/redist/x86/Microsoft.VC${VS_VERSION_INTERNAL}.CRT/$DLL_NAME"
- fi
- $ECHO "POSSIBLE_MSVC_DLL $POSSIBLEMSVC_DLL"
-
- DLL_NAME="$DLL_NAME"
- POSSIBLE_MSVC_DLL="$POSSIBLE_MSVC_DLL"
- METHOD="well-known location in VCINSTALLDIR"
- if test -n "$POSSIBLE_MSVC_DLL" -a -e "$POSSIBLE_MSVC_DLL"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found $DLL_NAME at $POSSIBLE_MSVC_DLL using $METHOD" >&5
-$as_echo "$as_me: Found $DLL_NAME at $POSSIBLE_MSVC_DLL using $METHOD" >&6;}
-
- # Need to check if the found msvcr is correct architecture
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking found $DLL_NAME architecture" >&5
-$as_echo_n "checking found $DLL_NAME architecture... " >&6; }
- MSVC_DLL_FILETYPE=`$FILE -b "$POSSIBLE_MSVC_DLL"`
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- # The MSYS 'file' command returns "PE32 executable for MS Windows (DLL) (GUI) Intel 80386 32-bit"
- # on x32 and "PE32+ executable for MS Windows (DLL) (GUI) Mono/.Net assembly" on x64 systems.
- if test "x$OPENJDK_TARGET_CPU_BITS" = x32; then
- CORRECT_MSVCR_ARCH="PE32 executable"
- else
- CORRECT_MSVCR_ARCH="PE32+ executable"
- fi
- else
- if test "x$OPENJDK_TARGET_CPU_BITS" = x32; then
- CORRECT_MSVCR_ARCH=386
- else
- CORRECT_MSVCR_ARCH=x86-64
- fi
- fi
- if $ECHO "$MSVC_DLL_FILETYPE" | $GREP "$CORRECT_MSVCR_ARCH" 2>&1 > /dev/null; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
-$as_echo "ok" >&6; }
- MSVC_DLL="$POSSIBLE_MSVC_DLL"
-
- # Only process if variable expands to non-empty
-
- if test "x$MSVC_DLL" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- path="$MSVC_DLL"
- new_path=`$CYGPATH -u "$path"`
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file precense.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Cannot locate the the path of MSVC_DLL" "$LINENO" 5
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
-
- if test "x$path" != "x$new_path"; then
- MSVC_DLL="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting MSVC_DLL to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting MSVC_DLL to \"$new_path\"" >&6;}
- fi
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- path="$MSVC_DLL"
- has_colon=`$ECHO $path | $GREP ^.:`
- new_path="$path"
- if test "x$has_colon" = x; then
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $path`
- fi
-
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- if test "x$path" != "x$new_path"; then
- MSVC_DLL="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting MSVC_DLL to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting MSVC_DLL to \"$new_path\"" >&6;}
- fi
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
-
- else
- # We're on a unix platform. Hooray! :)
- path="$MSVC_DLL"
- has_space=`$ECHO "$path" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
- fi
-
- # Use eval to expand a potential ~
- eval path="$path"
- if test ! -f "$path" && test ! -d "$path"; then
- as_fn_error $? "The path of MSVC_DLL, which resolves as \"$path\", is not found." "$LINENO" 5
- fi
-
- if test -d "$path"; then
- MSVC_DLL="`cd "$path"; $THEPWDCMD -L`"
- else
- dir="`$DIRNAME "$path"`"
- base="`$BASENAME "$path"`"
- MSVC_DLL="`cd "$dir"; $THEPWDCMD -L`/$base"
- fi
- fi
- fi
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $DLL_NAME" >&5
-$as_echo_n "checking for $DLL_NAME... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSVC_DLL" >&5
-$as_echo "$MSVC_DLL" >&6; }
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: incorrect, ignoring" >&5
-$as_echo "incorrect, ignoring" >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: The file type of the located $DLL_NAME is $MSVC_DLL_FILETYPE" >&5
-$as_echo "$as_me: The file type of the located $DLL_NAME is $MSVC_DLL_FILETYPE" >&6;}
- fi
- fi
-
- fi
- fi
-
- if test "x$MSVC_DLL" = x; then
- # Probe: Check in the Boot JDK directory.
- POSSIBLE_MSVC_DLL="$BOOT_JDK/bin/$DLL_NAME"
-
- DLL_NAME="$DLL_NAME"
- POSSIBLE_MSVC_DLL="$POSSIBLE_MSVC_DLL"
- METHOD="well-known location in Boot JDK"
- if test -n "$POSSIBLE_MSVC_DLL" -a -e "$POSSIBLE_MSVC_DLL"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found $DLL_NAME at $POSSIBLE_MSVC_DLL using $METHOD" >&5
-$as_echo "$as_me: Found $DLL_NAME at $POSSIBLE_MSVC_DLL using $METHOD" >&6;}
-
- # Need to check if the found msvcr is correct architecture
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking found $DLL_NAME architecture" >&5
-$as_echo_n "checking found $DLL_NAME architecture... " >&6; }
- MSVC_DLL_FILETYPE=`$FILE -b "$POSSIBLE_MSVC_DLL"`
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- # The MSYS 'file' command returns "PE32 executable for MS Windows (DLL) (GUI) Intel 80386 32-bit"
- # on x32 and "PE32+ executable for MS Windows (DLL) (GUI) Mono/.Net assembly" on x64 systems.
- if test "x$OPENJDK_TARGET_CPU_BITS" = x32; then
- CORRECT_MSVCR_ARCH="PE32 executable"
- else
- CORRECT_MSVCR_ARCH="PE32+ executable"
- fi
- else
- if test "x$OPENJDK_TARGET_CPU_BITS" = x32; then
- CORRECT_MSVCR_ARCH=386
- else
- CORRECT_MSVCR_ARCH=x86-64
- fi
- fi
- if $ECHO "$MSVC_DLL_FILETYPE" | $GREP "$CORRECT_MSVCR_ARCH" 2>&1 > /dev/null; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
-$as_echo "ok" >&6; }
- MSVC_DLL="$POSSIBLE_MSVC_DLL"
-
- # Only process if variable expands to non-empty
-
- if test "x$MSVC_DLL" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- path="$MSVC_DLL"
- new_path=`$CYGPATH -u "$path"`
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file precense.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Cannot locate the the path of MSVC_DLL" "$LINENO" 5
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
-
- if test "x$path" != "x$new_path"; then
- MSVC_DLL="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting MSVC_DLL to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting MSVC_DLL to \"$new_path\"" >&6;}
- fi
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- path="$MSVC_DLL"
- has_colon=`$ECHO $path | $GREP ^.:`
- new_path="$path"
- if test "x$has_colon" = x; then
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $path`
- fi
-
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- if test "x$path" != "x$new_path"; then
- MSVC_DLL="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting MSVC_DLL to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting MSVC_DLL to \"$new_path\"" >&6;}
- fi
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
-
- else
- # We're on a unix platform. Hooray! :)
- path="$MSVC_DLL"
- has_space=`$ECHO "$path" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
- fi
-
- # Use eval to expand a potential ~
- eval path="$path"
- if test ! -f "$path" && test ! -d "$path"; then
- as_fn_error $? "The path of MSVC_DLL, which resolves as \"$path\", is not found." "$LINENO" 5
- fi
-
- if test -d "$path"; then
- MSVC_DLL="`cd "$path"; $THEPWDCMD -L`"
- else
- dir="`$DIRNAME "$path"`"
- base="`$BASENAME "$path"`"
- MSVC_DLL="`cd "$dir"; $THEPWDCMD -L`/$base"
- fi
- fi
- fi
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $DLL_NAME" >&5
-$as_echo_n "checking for $DLL_NAME... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSVC_DLL" >&5
-$as_echo "$MSVC_DLL" >&6; }
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: incorrect, ignoring" >&5
-$as_echo "incorrect, ignoring" >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: The file type of the located $DLL_NAME is $MSVC_DLL_FILETYPE" >&5
-$as_echo "$as_me: The file type of the located $DLL_NAME is $MSVC_DLL_FILETYPE" >&6;}
- fi
- fi
-
- fi
-
- if test "x$MSVC_DLL" = x; then
- # Probe: Look in the Windows system32 directory
- CYGWIN_SYSTEMROOT="$SYSTEMROOT"
-
- windows_path="$CYGWIN_SYSTEMROOT"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- CYGWIN_SYSTEMROOT="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- CYGWIN_SYSTEMROOT="$unix_path"
- fi
-
- POSSIBLE_MSVC_DLL="$CYGWIN_SYSTEMROOT/system32/$DLL_NAME"
-
- DLL_NAME="$DLL_NAME"
- POSSIBLE_MSVC_DLL="$POSSIBLE_MSVC_DLL"
- METHOD="well-known location in SYSTEMROOT"
- if test -n "$POSSIBLE_MSVC_DLL" -a -e "$POSSIBLE_MSVC_DLL"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found $DLL_NAME at $POSSIBLE_MSVC_DLL using $METHOD" >&5
-$as_echo "$as_me: Found $DLL_NAME at $POSSIBLE_MSVC_DLL using $METHOD" >&6;}
-
- # Need to check if the found msvcr is correct architecture
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking found $DLL_NAME architecture" >&5
-$as_echo_n "checking found $DLL_NAME architecture... " >&6; }
- MSVC_DLL_FILETYPE=`$FILE -b "$POSSIBLE_MSVC_DLL"`
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- # The MSYS 'file' command returns "PE32 executable for MS Windows (DLL) (GUI) Intel 80386 32-bit"
- # on x32 and "PE32+ executable for MS Windows (DLL) (GUI) Mono/.Net assembly" on x64 systems.
- if test "x$OPENJDK_TARGET_CPU_BITS" = x32; then
- CORRECT_MSVCR_ARCH="PE32 executable"
- else
- CORRECT_MSVCR_ARCH="PE32+ executable"
- fi
- else
- if test "x$OPENJDK_TARGET_CPU_BITS" = x32; then
- CORRECT_MSVCR_ARCH=386
- else
- CORRECT_MSVCR_ARCH=x86-64
- fi
- fi
- if $ECHO "$MSVC_DLL_FILETYPE" | $GREP "$CORRECT_MSVCR_ARCH" 2>&1 > /dev/null; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
-$as_echo "ok" >&6; }
- MSVC_DLL="$POSSIBLE_MSVC_DLL"
-
- # Only process if variable expands to non-empty
-
- if test "x$MSVC_DLL" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- path="$MSVC_DLL"
- new_path=`$CYGPATH -u "$path"`
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file precense.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Cannot locate the the path of MSVC_DLL" "$LINENO" 5
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
-
- if test "x$path" != "x$new_path"; then
- MSVC_DLL="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting MSVC_DLL to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting MSVC_DLL to \"$new_path\"" >&6;}
- fi
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- path="$MSVC_DLL"
- has_colon=`$ECHO $path | $GREP ^.:`
- new_path="$path"
- if test "x$has_colon" = x; then
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $path`
- fi
-
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- if test "x$path" != "x$new_path"; then
- MSVC_DLL="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting MSVC_DLL to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting MSVC_DLL to \"$new_path\"" >&6;}
- fi
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
-
- else
- # We're on a unix platform. Hooray! :)
- path="$MSVC_DLL"
- has_space=`$ECHO "$path" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
- fi
-
- # Use eval to expand a potential ~
- eval path="$path"
- if test ! -f "$path" && test ! -d "$path"; then
- as_fn_error $? "The path of MSVC_DLL, which resolves as \"$path\", is not found." "$LINENO" 5
- fi
-
- if test -d "$path"; then
- MSVC_DLL="`cd "$path"; $THEPWDCMD -L`"
- else
- dir="`$DIRNAME "$path"`"
- base="`$BASENAME "$path"`"
- MSVC_DLL="`cd "$dir"; $THEPWDCMD -L`/$base"
- fi
- fi
- fi
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $DLL_NAME" >&5
-$as_echo_n "checking for $DLL_NAME... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSVC_DLL" >&5
-$as_echo "$MSVC_DLL" >&6; }
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: incorrect, ignoring" >&5
-$as_echo "incorrect, ignoring" >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: The file type of the located $DLL_NAME is $MSVC_DLL_FILETYPE" >&5
-$as_echo "$as_me: The file type of the located $DLL_NAME is $MSVC_DLL_FILETYPE" >&6;}
- fi
- fi
-
- fi
-
- if test "x$MSVC_DLL" = x; then
- # Probe: If Visual Studio Express is installed, there is usually one with the debugger
- if test "x$VS100COMNTOOLS" != x; then
- CYGWIN_VS_TOOLS_DIR="$VS100COMNTOOLS/.."
-
- windows_path="$CYGWIN_VS_TOOLS_DIR"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- CYGWIN_VS_TOOLS_DIR="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- CYGWIN_VS_TOOLS_DIR="$unix_path"
- fi
-
- if test "x$OPENJDK_TARGET_CPU_BITS" = x64; then
- POSSIBLE_MSVC_DLL=`$FIND "$CYGWIN_VS_TOOLS_DIR" -name $DLL_NAME \
- | $GREP -i /x64/ | $HEAD --lines 1`
- else
- POSSIBLE_MSVC_DLL=`$FIND "$CYGWIN_VS_TOOLS_DIR" -name $DLL_NAME \
- | $GREP -i /x86/ | $HEAD --lines 1`
- fi
-
- DLL_NAME="$DLL_NAME"
- POSSIBLE_MSVC_DLL="$POSSIBLE_MSVC_DLL"
- METHOD="search of VS100COMNTOOLS"
- if test -n "$POSSIBLE_MSVC_DLL" -a -e "$POSSIBLE_MSVC_DLL"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found $DLL_NAME at $POSSIBLE_MSVC_DLL using $METHOD" >&5
-$as_echo "$as_me: Found $DLL_NAME at $POSSIBLE_MSVC_DLL using $METHOD" >&6;}
-
- # Need to check if the found msvcr is correct architecture
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking found $DLL_NAME architecture" >&5
-$as_echo_n "checking found $DLL_NAME architecture... " >&6; }
- MSVC_DLL_FILETYPE=`$FILE -b "$POSSIBLE_MSVC_DLL"`
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- # The MSYS 'file' command returns "PE32 executable for MS Windows (DLL) (GUI) Intel 80386 32-bit"
- # on x32 and "PE32+ executable for MS Windows (DLL) (GUI) Mono/.Net assembly" on x64 systems.
- if test "x$OPENJDK_TARGET_CPU_BITS" = x32; then
- CORRECT_MSVCR_ARCH="PE32 executable"
- else
- CORRECT_MSVCR_ARCH="PE32+ executable"
- fi
- else
- if test "x$OPENJDK_TARGET_CPU_BITS" = x32; then
- CORRECT_MSVCR_ARCH=386
- else
- CORRECT_MSVCR_ARCH=x86-64
- fi
- fi
- if $ECHO "$MSVC_DLL_FILETYPE" | $GREP "$CORRECT_MSVCR_ARCH" 2>&1 > /dev/null; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
-$as_echo "ok" >&6; }
- MSVC_DLL="$POSSIBLE_MSVC_DLL"
-
- # Only process if variable expands to non-empty
-
- if test "x$MSVC_DLL" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- path="$MSVC_DLL"
- new_path=`$CYGPATH -u "$path"`
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file precense.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Cannot locate the the path of MSVC_DLL" "$LINENO" 5
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
-
- if test "x$path" != "x$new_path"; then
- MSVC_DLL="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting MSVC_DLL to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting MSVC_DLL to \"$new_path\"" >&6;}
- fi
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- path="$MSVC_DLL"
- has_colon=`$ECHO $path | $GREP ^.:`
- new_path="$path"
- if test "x$has_colon" = x; then
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $path`
- fi
-
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- if test "x$path" != "x$new_path"; then
- MSVC_DLL="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting MSVC_DLL to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting MSVC_DLL to \"$new_path\"" >&6;}
- fi
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
-
- else
- # We're on a unix platform. Hooray! :)
- path="$MSVC_DLL"
- has_space=`$ECHO "$path" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
- fi
-
- # Use eval to expand a potential ~
- eval path="$path"
- if test ! -f "$path" && test ! -d "$path"; then
- as_fn_error $? "The path of MSVC_DLL, which resolves as \"$path\", is not found." "$LINENO" 5
- fi
-
- if test -d "$path"; then
- MSVC_DLL="`cd "$path"; $THEPWDCMD -L`"
- else
- dir="`$DIRNAME "$path"`"
- base="`$BASENAME "$path"`"
- MSVC_DLL="`cd "$dir"; $THEPWDCMD -L`/$base"
- fi
- fi
- fi
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $DLL_NAME" >&5
-$as_echo_n "checking for $DLL_NAME... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSVC_DLL" >&5
-$as_echo "$MSVC_DLL" >&6; }
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: incorrect, ignoring" >&5
-$as_echo "incorrect, ignoring" >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: The file type of the located $DLL_NAME is $MSVC_DLL_FILETYPE" >&5
-$as_echo "$as_me: The file type of the located $DLL_NAME is $MSVC_DLL_FILETYPE" >&6;}
- fi
- fi
-
- fi
- fi
-
- if test "x$MSVC_DLL" = x; then
- # Probe: Search wildly in the VCINSTALLDIR. We've probably lost by now.
- # (This was the original behaviour; kept since it might turn something up)
- if test "x$CYGWIN_VC_INSTALL_DIR" != x; then
- if test "x$OPENJDK_TARGET_CPU_BITS" = x64; then
- POSSIBLE_MSVC_DLL=`$FIND "$CYGWIN_VC_INSTALL_DIR" -name $DLL_NAME \
- | $GREP x64 | $HEAD --lines 1`
- else
- POSSIBLE_MSVC_DLL=`$FIND "$CYGWIN_VC_INSTALL_DIR" -name $DLL_NAME \
- | $GREP x86 | $GREP -v ia64 | $GREP -v x64 | $HEAD --lines 1`
- if test "x$POSSIBLE_MSVC_DLL" = x; then
- # We're grasping at straws now...
- POSSIBLE_MSVC_DLL=`$FIND "$CYGWIN_VC_INSTALL_DIR" -name $DLL_NAME \
- | $HEAD --lines 1`
- fi
- fi
-
-
- DLL_NAME="$DLL_NAME"
- POSSIBLE_MSVC_DLL="$POSSIBLE_MSVC_DLL"
- METHOD="search of VCINSTALLDIR"
- if test -n "$POSSIBLE_MSVC_DLL" -a -e "$POSSIBLE_MSVC_DLL"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found $DLL_NAME at $POSSIBLE_MSVC_DLL using $METHOD" >&5
-$as_echo "$as_me: Found $DLL_NAME at $POSSIBLE_MSVC_DLL using $METHOD" >&6;}
-
- # Need to check if the found msvcr is correct architecture
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking found $DLL_NAME architecture" >&5
-$as_echo_n "checking found $DLL_NAME architecture... " >&6; }
- MSVC_DLL_FILETYPE=`$FILE -b "$POSSIBLE_MSVC_DLL"`
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- # The MSYS 'file' command returns "PE32 executable for MS Windows (DLL) (GUI) Intel 80386 32-bit"
- # on x32 and "PE32+ executable for MS Windows (DLL) (GUI) Mono/.Net assembly" on x64 systems.
- if test "x$OPENJDK_TARGET_CPU_BITS" = x32; then
- CORRECT_MSVCR_ARCH="PE32 executable"
- else
- CORRECT_MSVCR_ARCH="PE32+ executable"
- fi
- else
- if test "x$OPENJDK_TARGET_CPU_BITS" = x32; then
- CORRECT_MSVCR_ARCH=386
- else
- CORRECT_MSVCR_ARCH=x86-64
- fi
- fi
- if $ECHO "$MSVC_DLL_FILETYPE" | $GREP "$CORRECT_MSVCR_ARCH" 2>&1 > /dev/null; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
-$as_echo "ok" >&6; }
- MSVC_DLL="$POSSIBLE_MSVC_DLL"
-
- # Only process if variable expands to non-empty
-
- if test "x$MSVC_DLL" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- path="$MSVC_DLL"
- new_path=`$CYGPATH -u "$path"`
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file precense.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Cannot locate the the path of MSVC_DLL" "$LINENO" 5
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
-
- if test "x$path" != "x$new_path"; then
- MSVC_DLL="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting MSVC_DLL to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting MSVC_DLL to \"$new_path\"" >&6;}
- fi
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- path="$MSVC_DLL"
- has_colon=`$ECHO $path | $GREP ^.:`
- new_path="$path"
- if test "x$has_colon" = x; then
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $path`
- fi
-
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- if test "x$path" != "x$new_path"; then
- MSVC_DLL="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting MSVC_DLL to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting MSVC_DLL to \"$new_path\"" >&6;}
- fi
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
-
- else
- # We're on a unix platform. Hooray! :)
- path="$MSVC_DLL"
- has_space=`$ECHO "$path" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
- fi
-
- # Use eval to expand a potential ~
- eval path="$path"
- if test ! -f "$path" && test ! -d "$path"; then
- as_fn_error $? "The path of MSVC_DLL, which resolves as \"$path\", is not found." "$LINENO" 5
- fi
-
- if test -d "$path"; then
- MSVC_DLL="`cd "$path"; $THEPWDCMD -L`"
- else
- dir="`$DIRNAME "$path"`"
- base="`$BASENAME "$path"`"
- MSVC_DLL="`cd "$dir"; $THEPWDCMD -L`/$base"
- fi
- fi
- fi
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $DLL_NAME" >&5
-$as_echo_n "checking for $DLL_NAME... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSVC_DLL" >&5
-$as_echo "$MSVC_DLL" >&6; }
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: incorrect, ignoring" >&5
-$as_echo "incorrect, ignoring" >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: The file type of the located $DLL_NAME is $MSVC_DLL_FILETYPE" >&5
-$as_echo "$as_me: The file type of the located $DLL_NAME is $MSVC_DLL_FILETYPE" >&6;}
- fi
- fi
-
- fi
- fi
-
- if test "x$MSVC_DLL" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $DLL_NAME" >&5
-$as_echo_n "checking for $DLL_NAME... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- as_fn_error $? "Could not find $DLL_NAME. Please specify using --with-msvcr-dll." "$LINENO" 5
- fi
-
- MSVCR_DLL="$MSVC_DLL"
- fi
-
-
-
-# Check whether --with-msvcp-dll was given.
-if test "${with_msvcp_dll+set}" = set; then :
- withval=$with_msvcp_dll;
-fi
-
-
- if test "x$MSVCP_NAME" != "x"; then
- if test "x$with_msvcp_dll" != x; then
- # If given explicitly by user, do not probe. If not present, fail directly.
-
- DLL_NAME="$MSVCP_NAME"
- POSSIBLE_MSVC_DLL="$with_msvcp_dll"
- METHOD="--with-msvcp-dll"
- if test -n "$POSSIBLE_MSVC_DLL" -a -e "$POSSIBLE_MSVC_DLL"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found $DLL_NAME at $POSSIBLE_MSVC_DLL using $METHOD" >&5
-$as_echo "$as_me: Found $DLL_NAME at $POSSIBLE_MSVC_DLL using $METHOD" >&6;}
-
- # Need to check if the found msvcr is correct architecture
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking found $DLL_NAME architecture" >&5
-$as_echo_n "checking found $DLL_NAME architecture... " >&6; }
- MSVC_DLL_FILETYPE=`$FILE -b "$POSSIBLE_MSVC_DLL"`
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- # The MSYS 'file' command returns "PE32 executable for MS Windows (DLL) (GUI) Intel 80386 32-bit"
- # on x32 and "PE32+ executable for MS Windows (DLL) (GUI) Mono/.Net assembly" on x64 systems.
- if test "x$OPENJDK_TARGET_CPU_BITS" = x32; then
- CORRECT_MSVCR_ARCH="PE32 executable"
- else
- CORRECT_MSVCR_ARCH="PE32+ executable"
- fi
- else
- if test "x$OPENJDK_TARGET_CPU_BITS" = x32; then
- CORRECT_MSVCR_ARCH=386
- else
- CORRECT_MSVCR_ARCH=x86-64
- fi
- fi
- if $ECHO "$MSVC_DLL_FILETYPE" | $GREP "$CORRECT_MSVCR_ARCH" 2>&1 > /dev/null; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
-$as_echo "ok" >&6; }
- MSVC_DLL="$POSSIBLE_MSVC_DLL"
-
- # Only process if variable expands to non-empty
-
- if test "x$MSVC_DLL" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- path="$MSVC_DLL"
- new_path=`$CYGPATH -u "$path"`
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file precense.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Cannot locate the the path of MSVC_DLL" "$LINENO" 5
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
-
- if test "x$path" != "x$new_path"; then
- MSVC_DLL="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting MSVC_DLL to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting MSVC_DLL to \"$new_path\"" >&6;}
- fi
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- path="$MSVC_DLL"
- has_colon=`$ECHO $path | $GREP ^.:`
- new_path="$path"
- if test "x$has_colon" = x; then
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $path`
- fi
-
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- if test "x$path" != "x$new_path"; then
- MSVC_DLL="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting MSVC_DLL to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting MSVC_DLL to \"$new_path\"" >&6;}
- fi
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
-
- else
- # We're on a unix platform. Hooray! :)
- path="$MSVC_DLL"
- has_space=`$ECHO "$path" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
- fi
-
- # Use eval to expand a potential ~
- eval path="$path"
- if test ! -f "$path" && test ! -d "$path"; then
- as_fn_error $? "The path of MSVC_DLL, which resolves as \"$path\", is not found." "$LINENO" 5
- fi
-
- if test -d "$path"; then
- MSVC_DLL="`cd "$path"; $THEPWDCMD -L`"
- else
- dir="`$DIRNAME "$path"`"
- base="`$BASENAME "$path"`"
- MSVC_DLL="`cd "$dir"; $THEPWDCMD -L`/$base"
- fi
- fi
- fi
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $DLL_NAME" >&5
-$as_echo_n "checking for $DLL_NAME... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSVC_DLL" >&5
-$as_echo "$MSVC_DLL" >&6; }
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: incorrect, ignoring" >&5
-$as_echo "incorrect, ignoring" >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: The file type of the located $DLL_NAME is $MSVC_DLL_FILETYPE" >&5
-$as_echo "$as_me: The file type of the located $DLL_NAME is $MSVC_DLL_FILETYPE" >&6;}
- fi
- fi
-
- if test "x$MSVC_DLL" = x; then
- as_fn_error $? "Could not find a proper $MSVCP_NAME as specified by --with-msvcp-dll" "$LINENO" 5
- fi
- MSVCP_DLL="$MSVC_DLL"
- elif test "x$DEVKIT_MSVCP_DLL" != x; then
-
- DLL_NAME="$MSVCP_NAME"
- POSSIBLE_MSVC_DLL="$DEVKIT_MSVCP_DLL"
- METHOD="devkit"
- if test -n "$POSSIBLE_MSVC_DLL" -a -e "$POSSIBLE_MSVC_DLL"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found $DLL_NAME at $POSSIBLE_MSVC_DLL using $METHOD" >&5
-$as_echo "$as_me: Found $DLL_NAME at $POSSIBLE_MSVC_DLL using $METHOD" >&6;}
-
- # Need to check if the found msvcr is correct architecture
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking found $DLL_NAME architecture" >&5
-$as_echo_n "checking found $DLL_NAME architecture... " >&6; }
- MSVC_DLL_FILETYPE=`$FILE -b "$POSSIBLE_MSVC_DLL"`
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- # The MSYS 'file' command returns "PE32 executable for MS Windows (DLL) (GUI) Intel 80386 32-bit"
- # on x32 and "PE32+ executable for MS Windows (DLL) (GUI) Mono/.Net assembly" on x64 systems.
- if test "x$OPENJDK_TARGET_CPU_BITS" = x32; then
- CORRECT_MSVCR_ARCH="PE32 executable"
- else
- CORRECT_MSVCR_ARCH="PE32+ executable"
- fi
- else
- if test "x$OPENJDK_TARGET_CPU_BITS" = x32; then
- CORRECT_MSVCR_ARCH=386
- else
- CORRECT_MSVCR_ARCH=x86-64
- fi
- fi
- if $ECHO "$MSVC_DLL_FILETYPE" | $GREP "$CORRECT_MSVCR_ARCH" 2>&1 > /dev/null; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
-$as_echo "ok" >&6; }
- MSVC_DLL="$POSSIBLE_MSVC_DLL"
-
- # Only process if variable expands to non-empty
-
- if test "x$MSVC_DLL" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- path="$MSVC_DLL"
- new_path=`$CYGPATH -u "$path"`
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file precense.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Cannot locate the the path of MSVC_DLL" "$LINENO" 5
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
-
- if test "x$path" != "x$new_path"; then
- MSVC_DLL="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting MSVC_DLL to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting MSVC_DLL to \"$new_path\"" >&6;}
- fi
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- path="$MSVC_DLL"
- has_colon=`$ECHO $path | $GREP ^.:`
- new_path="$path"
- if test "x$has_colon" = x; then
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $path`
- fi
-
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- if test "x$path" != "x$new_path"; then
- MSVC_DLL="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting MSVC_DLL to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting MSVC_DLL to \"$new_path\"" >&6;}
- fi
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
-
- else
- # We're on a unix platform. Hooray! :)
- path="$MSVC_DLL"
- has_space=`$ECHO "$path" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
- fi
-
- # Use eval to expand a potential ~
- eval path="$path"
- if test ! -f "$path" && test ! -d "$path"; then
- as_fn_error $? "The path of MSVC_DLL, which resolves as \"$path\", is not found." "$LINENO" 5
- fi
-
- if test -d "$path"; then
- MSVC_DLL="`cd "$path"; $THEPWDCMD -L`"
- else
- dir="`$DIRNAME "$path"`"
- base="`$BASENAME "$path"`"
- MSVC_DLL="`cd "$dir"; $THEPWDCMD -L`/$base"
- fi
- fi
- fi
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $DLL_NAME" >&5
-$as_echo_n "checking for $DLL_NAME... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSVC_DLL" >&5
-$as_echo "$MSVC_DLL" >&6; }
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: incorrect, ignoring" >&5
-$as_echo "incorrect, ignoring" >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: The file type of the located $DLL_NAME is $MSVC_DLL_FILETYPE" >&5
-$as_echo "$as_me: The file type of the located $DLL_NAME is $MSVC_DLL_FILETYPE" >&6;}
- fi
- fi
-
- if test "x$MSVC_DLL" = x; then
- as_fn_error $? "Could not find a proper $MSVCP_NAME as specified by devkit" "$LINENO" 5
- fi
- MSVCP_DLL="$MSVC_DLL"
- else
-
- DLL_NAME="${MSVCP_NAME}"
- MSVC_DLL=
-
- if test "x$MSVC_DLL" = x; then
- # Probe: Using well-known location from Visual Studio 10.0
- if test "x$VCINSTALLDIR" != x; then
- CYGWIN_VC_INSTALL_DIR="$VCINSTALLDIR"
-
- windows_path="$CYGWIN_VC_INSTALL_DIR"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- CYGWIN_VC_INSTALL_DIR="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- CYGWIN_VC_INSTALL_DIR="$unix_path"
- fi
-
- if test "x$OPENJDK_TARGET_CPU_BITS" = x64; then
- POSSIBLE_MSVC_DLL="$CYGWIN_VC_INSTALL_DIR/redist/x64/Microsoft.VC${VS_VERSION_INTERNAL}.CRT/$DLL_NAME"
- else
- POSSIBLE_MSVC_DLL="$CYGWIN_VC_INSTALL_DIR/redist/x86/Microsoft.VC${VS_VERSION_INTERNAL}.CRT/$DLL_NAME"
- fi
- $ECHO "POSSIBLE_MSVC_DLL $POSSIBLEMSVC_DLL"
-
- DLL_NAME="$DLL_NAME"
- POSSIBLE_MSVC_DLL="$POSSIBLE_MSVC_DLL"
- METHOD="well-known location in VCINSTALLDIR"
- if test -n "$POSSIBLE_MSVC_DLL" -a -e "$POSSIBLE_MSVC_DLL"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found $DLL_NAME at $POSSIBLE_MSVC_DLL using $METHOD" >&5
-$as_echo "$as_me: Found $DLL_NAME at $POSSIBLE_MSVC_DLL using $METHOD" >&6;}
-
- # Need to check if the found msvcr is correct architecture
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking found $DLL_NAME architecture" >&5
-$as_echo_n "checking found $DLL_NAME architecture... " >&6; }
- MSVC_DLL_FILETYPE=`$FILE -b "$POSSIBLE_MSVC_DLL"`
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- # The MSYS 'file' command returns "PE32 executable for MS Windows (DLL) (GUI) Intel 80386 32-bit"
- # on x32 and "PE32+ executable for MS Windows (DLL) (GUI) Mono/.Net assembly" on x64 systems.
- if test "x$OPENJDK_TARGET_CPU_BITS" = x32; then
- CORRECT_MSVCR_ARCH="PE32 executable"
- else
- CORRECT_MSVCR_ARCH="PE32+ executable"
- fi
- else
- if test "x$OPENJDK_TARGET_CPU_BITS" = x32; then
- CORRECT_MSVCR_ARCH=386
- else
- CORRECT_MSVCR_ARCH=x86-64
- fi
- fi
- if $ECHO "$MSVC_DLL_FILETYPE" | $GREP "$CORRECT_MSVCR_ARCH" 2>&1 > /dev/null; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
-$as_echo "ok" >&6; }
- MSVC_DLL="$POSSIBLE_MSVC_DLL"
-
- # Only process if variable expands to non-empty
-
- if test "x$MSVC_DLL" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- path="$MSVC_DLL"
- new_path=`$CYGPATH -u "$path"`
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file precense.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Cannot locate the the path of MSVC_DLL" "$LINENO" 5
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
-
- if test "x$path" != "x$new_path"; then
- MSVC_DLL="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting MSVC_DLL to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting MSVC_DLL to \"$new_path\"" >&6;}
- fi
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- path="$MSVC_DLL"
- has_colon=`$ECHO $path | $GREP ^.:`
- new_path="$path"
- if test "x$has_colon" = x; then
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $path`
- fi
-
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- if test "x$path" != "x$new_path"; then
- MSVC_DLL="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting MSVC_DLL to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting MSVC_DLL to \"$new_path\"" >&6;}
- fi
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
-
- else
- # We're on a unix platform. Hooray! :)
- path="$MSVC_DLL"
- has_space=`$ECHO "$path" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
- fi
-
- # Use eval to expand a potential ~
- eval path="$path"
- if test ! -f "$path" && test ! -d "$path"; then
- as_fn_error $? "The path of MSVC_DLL, which resolves as \"$path\", is not found." "$LINENO" 5
- fi
-
- if test -d "$path"; then
- MSVC_DLL="`cd "$path"; $THEPWDCMD -L`"
- else
- dir="`$DIRNAME "$path"`"
- base="`$BASENAME "$path"`"
- MSVC_DLL="`cd "$dir"; $THEPWDCMD -L`/$base"
- fi
- fi
- fi
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $DLL_NAME" >&5
-$as_echo_n "checking for $DLL_NAME... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSVC_DLL" >&5
-$as_echo "$MSVC_DLL" >&6; }
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: incorrect, ignoring" >&5
-$as_echo "incorrect, ignoring" >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: The file type of the located $DLL_NAME is $MSVC_DLL_FILETYPE" >&5
-$as_echo "$as_me: The file type of the located $DLL_NAME is $MSVC_DLL_FILETYPE" >&6;}
- fi
- fi
-
- fi
- fi
-
- if test "x$MSVC_DLL" = x; then
- # Probe: Check in the Boot JDK directory.
- POSSIBLE_MSVC_DLL="$BOOT_JDK/bin/$DLL_NAME"
-
- DLL_NAME="$DLL_NAME"
- POSSIBLE_MSVC_DLL="$POSSIBLE_MSVC_DLL"
- METHOD="well-known location in Boot JDK"
- if test -n "$POSSIBLE_MSVC_DLL" -a -e "$POSSIBLE_MSVC_DLL"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found $DLL_NAME at $POSSIBLE_MSVC_DLL using $METHOD" >&5
-$as_echo "$as_me: Found $DLL_NAME at $POSSIBLE_MSVC_DLL using $METHOD" >&6;}
-
- # Need to check if the found msvcr is correct architecture
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking found $DLL_NAME architecture" >&5
-$as_echo_n "checking found $DLL_NAME architecture... " >&6; }
- MSVC_DLL_FILETYPE=`$FILE -b "$POSSIBLE_MSVC_DLL"`
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- # The MSYS 'file' command returns "PE32 executable for MS Windows (DLL) (GUI) Intel 80386 32-bit"
- # on x32 and "PE32+ executable for MS Windows (DLL) (GUI) Mono/.Net assembly" on x64 systems.
- if test "x$OPENJDK_TARGET_CPU_BITS" = x32; then
- CORRECT_MSVCR_ARCH="PE32 executable"
- else
- CORRECT_MSVCR_ARCH="PE32+ executable"
- fi
- else
- if test "x$OPENJDK_TARGET_CPU_BITS" = x32; then
- CORRECT_MSVCR_ARCH=386
- else
- CORRECT_MSVCR_ARCH=x86-64
- fi
- fi
- if $ECHO "$MSVC_DLL_FILETYPE" | $GREP "$CORRECT_MSVCR_ARCH" 2>&1 > /dev/null; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
-$as_echo "ok" >&6; }
- MSVC_DLL="$POSSIBLE_MSVC_DLL"
-
- # Only process if variable expands to non-empty
-
- if test "x$MSVC_DLL" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- path="$MSVC_DLL"
- new_path=`$CYGPATH -u "$path"`
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file precense.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Cannot locate the the path of MSVC_DLL" "$LINENO" 5
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
-
- if test "x$path" != "x$new_path"; then
- MSVC_DLL="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting MSVC_DLL to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting MSVC_DLL to \"$new_path\"" >&6;}
- fi
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- path="$MSVC_DLL"
- has_colon=`$ECHO $path | $GREP ^.:`
- new_path="$path"
- if test "x$has_colon" = x; then
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $path`
- fi
-
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- if test "x$path" != "x$new_path"; then
- MSVC_DLL="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting MSVC_DLL to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting MSVC_DLL to \"$new_path\"" >&6;}
- fi
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
-
- else
- # We're on a unix platform. Hooray! :)
- path="$MSVC_DLL"
- has_space=`$ECHO "$path" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
- fi
-
- # Use eval to expand a potential ~
- eval path="$path"
- if test ! -f "$path" && test ! -d "$path"; then
- as_fn_error $? "The path of MSVC_DLL, which resolves as \"$path\", is not found." "$LINENO" 5
- fi
-
- if test -d "$path"; then
- MSVC_DLL="`cd "$path"; $THEPWDCMD -L`"
- else
- dir="`$DIRNAME "$path"`"
- base="`$BASENAME "$path"`"
- MSVC_DLL="`cd "$dir"; $THEPWDCMD -L`/$base"
- fi
- fi
- fi
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $DLL_NAME" >&5
-$as_echo_n "checking for $DLL_NAME... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSVC_DLL" >&5
-$as_echo "$MSVC_DLL" >&6; }
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: incorrect, ignoring" >&5
-$as_echo "incorrect, ignoring" >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: The file type of the located $DLL_NAME is $MSVC_DLL_FILETYPE" >&5
-$as_echo "$as_me: The file type of the located $DLL_NAME is $MSVC_DLL_FILETYPE" >&6;}
- fi
- fi
-
- fi
-
- if test "x$MSVC_DLL" = x; then
- # Probe: Look in the Windows system32 directory
- CYGWIN_SYSTEMROOT="$SYSTEMROOT"
-
- windows_path="$CYGWIN_SYSTEMROOT"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- CYGWIN_SYSTEMROOT="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- CYGWIN_SYSTEMROOT="$unix_path"
- fi
-
- POSSIBLE_MSVC_DLL="$CYGWIN_SYSTEMROOT/system32/$DLL_NAME"
-
- DLL_NAME="$DLL_NAME"
- POSSIBLE_MSVC_DLL="$POSSIBLE_MSVC_DLL"
- METHOD="well-known location in SYSTEMROOT"
- if test -n "$POSSIBLE_MSVC_DLL" -a -e "$POSSIBLE_MSVC_DLL"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found $DLL_NAME at $POSSIBLE_MSVC_DLL using $METHOD" >&5
-$as_echo "$as_me: Found $DLL_NAME at $POSSIBLE_MSVC_DLL using $METHOD" >&6;}
-
- # Need to check if the found msvcr is correct architecture
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking found $DLL_NAME architecture" >&5
-$as_echo_n "checking found $DLL_NAME architecture... " >&6; }
- MSVC_DLL_FILETYPE=`$FILE -b "$POSSIBLE_MSVC_DLL"`
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- # The MSYS 'file' command returns "PE32 executable for MS Windows (DLL) (GUI) Intel 80386 32-bit"
- # on x32 and "PE32+ executable for MS Windows (DLL) (GUI) Mono/.Net assembly" on x64 systems.
- if test "x$OPENJDK_TARGET_CPU_BITS" = x32; then
- CORRECT_MSVCR_ARCH="PE32 executable"
- else
- CORRECT_MSVCR_ARCH="PE32+ executable"
- fi
- else
- if test "x$OPENJDK_TARGET_CPU_BITS" = x32; then
- CORRECT_MSVCR_ARCH=386
- else
- CORRECT_MSVCR_ARCH=x86-64
- fi
- fi
- if $ECHO "$MSVC_DLL_FILETYPE" | $GREP "$CORRECT_MSVCR_ARCH" 2>&1 > /dev/null; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
-$as_echo "ok" >&6; }
- MSVC_DLL="$POSSIBLE_MSVC_DLL"
-
- # Only process if variable expands to non-empty
-
- if test "x$MSVC_DLL" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- path="$MSVC_DLL"
- new_path=`$CYGPATH -u "$path"`
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file precense.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Cannot locate the the path of MSVC_DLL" "$LINENO" 5
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
-
- if test "x$path" != "x$new_path"; then
- MSVC_DLL="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting MSVC_DLL to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting MSVC_DLL to \"$new_path\"" >&6;}
- fi
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- path="$MSVC_DLL"
- has_colon=`$ECHO $path | $GREP ^.:`
- new_path="$path"
- if test "x$has_colon" = x; then
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $path`
- fi
-
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- if test "x$path" != "x$new_path"; then
- MSVC_DLL="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting MSVC_DLL to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting MSVC_DLL to \"$new_path\"" >&6;}
- fi
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
-
- else
- # We're on a unix platform. Hooray! :)
- path="$MSVC_DLL"
- has_space=`$ECHO "$path" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
- fi
-
- # Use eval to expand a potential ~
- eval path="$path"
- if test ! -f "$path" && test ! -d "$path"; then
- as_fn_error $? "The path of MSVC_DLL, which resolves as \"$path\", is not found." "$LINENO" 5
- fi
-
- if test -d "$path"; then
- MSVC_DLL="`cd "$path"; $THEPWDCMD -L`"
- else
- dir="`$DIRNAME "$path"`"
- base="`$BASENAME "$path"`"
- MSVC_DLL="`cd "$dir"; $THEPWDCMD -L`/$base"
- fi
- fi
- fi
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $DLL_NAME" >&5
-$as_echo_n "checking for $DLL_NAME... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSVC_DLL" >&5
-$as_echo "$MSVC_DLL" >&6; }
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: incorrect, ignoring" >&5
-$as_echo "incorrect, ignoring" >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: The file type of the located $DLL_NAME is $MSVC_DLL_FILETYPE" >&5
-$as_echo "$as_me: The file type of the located $DLL_NAME is $MSVC_DLL_FILETYPE" >&6;}
- fi
- fi
-
- fi
-
- if test "x$MSVC_DLL" = x; then
- # Probe: If Visual Studio Express is installed, there is usually one with the debugger
- if test "x$VS100COMNTOOLS" != x; then
- CYGWIN_VS_TOOLS_DIR="$VS100COMNTOOLS/.."
-
- windows_path="$CYGWIN_VS_TOOLS_DIR"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- CYGWIN_VS_TOOLS_DIR="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- CYGWIN_VS_TOOLS_DIR="$unix_path"
- fi
-
- if test "x$OPENJDK_TARGET_CPU_BITS" = x64; then
- POSSIBLE_MSVC_DLL=`$FIND "$CYGWIN_VS_TOOLS_DIR" -name $DLL_NAME \
- | $GREP -i /x64/ | $HEAD --lines 1`
- else
- POSSIBLE_MSVC_DLL=`$FIND "$CYGWIN_VS_TOOLS_DIR" -name $DLL_NAME \
- | $GREP -i /x86/ | $HEAD --lines 1`
- fi
-
- DLL_NAME="$DLL_NAME"
- POSSIBLE_MSVC_DLL="$POSSIBLE_MSVC_DLL"
- METHOD="search of VS100COMNTOOLS"
- if test -n "$POSSIBLE_MSVC_DLL" -a -e "$POSSIBLE_MSVC_DLL"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found $DLL_NAME at $POSSIBLE_MSVC_DLL using $METHOD" >&5
-$as_echo "$as_me: Found $DLL_NAME at $POSSIBLE_MSVC_DLL using $METHOD" >&6;}
-
- # Need to check if the found msvcr is correct architecture
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking found $DLL_NAME architecture" >&5
-$as_echo_n "checking found $DLL_NAME architecture... " >&6; }
- MSVC_DLL_FILETYPE=`$FILE -b "$POSSIBLE_MSVC_DLL"`
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- # The MSYS 'file' command returns "PE32 executable for MS Windows (DLL) (GUI) Intel 80386 32-bit"
- # on x32 and "PE32+ executable for MS Windows (DLL) (GUI) Mono/.Net assembly" on x64 systems.
- if test "x$OPENJDK_TARGET_CPU_BITS" = x32; then
- CORRECT_MSVCR_ARCH="PE32 executable"
- else
- CORRECT_MSVCR_ARCH="PE32+ executable"
- fi
- else
- if test "x$OPENJDK_TARGET_CPU_BITS" = x32; then
- CORRECT_MSVCR_ARCH=386
- else
- CORRECT_MSVCR_ARCH=x86-64
- fi
- fi
- if $ECHO "$MSVC_DLL_FILETYPE" | $GREP "$CORRECT_MSVCR_ARCH" 2>&1 > /dev/null; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
-$as_echo "ok" >&6; }
- MSVC_DLL="$POSSIBLE_MSVC_DLL"
-
- # Only process if variable expands to non-empty
-
- if test "x$MSVC_DLL" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- path="$MSVC_DLL"
- new_path=`$CYGPATH -u "$path"`
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file precense.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Cannot locate the the path of MSVC_DLL" "$LINENO" 5
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
-
- if test "x$path" != "x$new_path"; then
- MSVC_DLL="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting MSVC_DLL to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting MSVC_DLL to \"$new_path\"" >&6;}
- fi
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- path="$MSVC_DLL"
- has_colon=`$ECHO $path | $GREP ^.:`
- new_path="$path"
- if test "x$has_colon" = x; then
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $path`
- fi
-
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- if test "x$path" != "x$new_path"; then
- MSVC_DLL="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting MSVC_DLL to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting MSVC_DLL to \"$new_path\"" >&6;}
- fi
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
-
- else
- # We're on a unix platform. Hooray! :)
- path="$MSVC_DLL"
- has_space=`$ECHO "$path" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
- fi
-
- # Use eval to expand a potential ~
- eval path="$path"
- if test ! -f "$path" && test ! -d "$path"; then
- as_fn_error $? "The path of MSVC_DLL, which resolves as \"$path\", is not found." "$LINENO" 5
- fi
-
- if test -d "$path"; then
- MSVC_DLL="`cd "$path"; $THEPWDCMD -L`"
- else
- dir="`$DIRNAME "$path"`"
- base="`$BASENAME "$path"`"
- MSVC_DLL="`cd "$dir"; $THEPWDCMD -L`/$base"
- fi
- fi
- fi
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $DLL_NAME" >&5
-$as_echo_n "checking for $DLL_NAME... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSVC_DLL" >&5
-$as_echo "$MSVC_DLL" >&6; }
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: incorrect, ignoring" >&5
-$as_echo "incorrect, ignoring" >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: The file type of the located $DLL_NAME is $MSVC_DLL_FILETYPE" >&5
-$as_echo "$as_me: The file type of the located $DLL_NAME is $MSVC_DLL_FILETYPE" >&6;}
- fi
- fi
-
- fi
- fi
-
- if test "x$MSVC_DLL" = x; then
- # Probe: Search wildly in the VCINSTALLDIR. We've probably lost by now.
- # (This was the original behaviour; kept since it might turn something up)
- if test "x$CYGWIN_VC_INSTALL_DIR" != x; then
- if test "x$OPENJDK_TARGET_CPU_BITS" = x64; then
- POSSIBLE_MSVC_DLL=`$FIND "$CYGWIN_VC_INSTALL_DIR" -name $DLL_NAME \
- | $GREP x64 | $HEAD --lines 1`
- else
- POSSIBLE_MSVC_DLL=`$FIND "$CYGWIN_VC_INSTALL_DIR" -name $DLL_NAME \
- | $GREP x86 | $GREP -v ia64 | $GREP -v x64 | $HEAD --lines 1`
- if test "x$POSSIBLE_MSVC_DLL" = x; then
- # We're grasping at straws now...
- POSSIBLE_MSVC_DLL=`$FIND "$CYGWIN_VC_INSTALL_DIR" -name $DLL_NAME \
- | $HEAD --lines 1`
- fi
- fi
-
-
- DLL_NAME="$DLL_NAME"
- POSSIBLE_MSVC_DLL="$POSSIBLE_MSVC_DLL"
- METHOD="search of VCINSTALLDIR"
- if test -n "$POSSIBLE_MSVC_DLL" -a -e "$POSSIBLE_MSVC_DLL"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found $DLL_NAME at $POSSIBLE_MSVC_DLL using $METHOD" >&5
-$as_echo "$as_me: Found $DLL_NAME at $POSSIBLE_MSVC_DLL using $METHOD" >&6;}
-
- # Need to check if the found msvcr is correct architecture
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking found $DLL_NAME architecture" >&5
-$as_echo_n "checking found $DLL_NAME architecture... " >&6; }
- MSVC_DLL_FILETYPE=`$FILE -b "$POSSIBLE_MSVC_DLL"`
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- # The MSYS 'file' command returns "PE32 executable for MS Windows (DLL) (GUI) Intel 80386 32-bit"
- # on x32 and "PE32+ executable for MS Windows (DLL) (GUI) Mono/.Net assembly" on x64 systems.
- if test "x$OPENJDK_TARGET_CPU_BITS" = x32; then
- CORRECT_MSVCR_ARCH="PE32 executable"
- else
- CORRECT_MSVCR_ARCH="PE32+ executable"
- fi
- else
- if test "x$OPENJDK_TARGET_CPU_BITS" = x32; then
- CORRECT_MSVCR_ARCH=386
- else
- CORRECT_MSVCR_ARCH=x86-64
- fi
- fi
- if $ECHO "$MSVC_DLL_FILETYPE" | $GREP "$CORRECT_MSVCR_ARCH" 2>&1 > /dev/null; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
-$as_echo "ok" >&6; }
- MSVC_DLL="$POSSIBLE_MSVC_DLL"
-
- # Only process if variable expands to non-empty
-
- if test "x$MSVC_DLL" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- path="$MSVC_DLL"
- new_path=`$CYGPATH -u "$path"`
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file precense.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Cannot locate the the path of MSVC_DLL" "$LINENO" 5
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
-
- if test "x$path" != "x$new_path"; then
- MSVC_DLL="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting MSVC_DLL to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting MSVC_DLL to \"$new_path\"" >&6;}
- fi
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- path="$MSVC_DLL"
- has_colon=`$ECHO $path | $GREP ^.:`
- new_path="$path"
- if test "x$has_colon" = x; then
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $path`
- fi
-
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- if test "x$path" != "x$new_path"; then
- MSVC_DLL="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting MSVC_DLL to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting MSVC_DLL to \"$new_path\"" >&6;}
- fi
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
-
- else
- # We're on a unix platform. Hooray! :)
- path="$MSVC_DLL"
- has_space=`$ECHO "$path" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
- fi
-
- # Use eval to expand a potential ~
- eval path="$path"
- if test ! -f "$path" && test ! -d "$path"; then
- as_fn_error $? "The path of MSVC_DLL, which resolves as \"$path\", is not found." "$LINENO" 5
- fi
-
- if test -d "$path"; then
- MSVC_DLL="`cd "$path"; $THEPWDCMD -L`"
- else
- dir="`$DIRNAME "$path"`"
- base="`$BASENAME "$path"`"
- MSVC_DLL="`cd "$dir"; $THEPWDCMD -L`/$base"
- fi
- fi
- fi
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $DLL_NAME" >&5
-$as_echo_n "checking for $DLL_NAME... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSVC_DLL" >&5
-$as_echo "$MSVC_DLL" >&6; }
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: incorrect, ignoring" >&5
-$as_echo "incorrect, ignoring" >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: The file type of the located $DLL_NAME is $MSVC_DLL_FILETYPE" >&5
-$as_echo "$as_me: The file type of the located $DLL_NAME is $MSVC_DLL_FILETYPE" >&6;}
- fi
- fi
-
- fi
- fi
-
- if test "x$MSVC_DLL" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $DLL_NAME" >&5
-$as_echo_n "checking for $DLL_NAME... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- as_fn_error $? "Could not find $DLL_NAME. Please specify using --with-msvcr-dll." "$LINENO" 5
- fi
-
- MSVCP_DLL="$MSVC_DLL"
- fi
-
- fi
-
- fi
-
-
- if test "x$NEEDS_LIB_X11" = xfalse; then
- if (test "x${with_x}" != x && test "x${with_x}" != xno); then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: X11 is not used, so --with-x is ignored" >&5
-$as_echo "$as_me: WARNING: X11 is not used, so --with-x is ignored" >&2;}
- fi
- X_CFLAGS=
- X_LIBS=
- else
-
- if test "x${with_x}" = xno; then
- as_fn_error $? "It is not possible to disable the use of X11. Remove the --without-x option." "$LINENO" 5
- fi
-
- if test "x${with_x}" != x && test "x${with_x}" != xyes; then
- # The user has specified a X11 base directory. Use it for includes and
- # libraries, unless explicitly overridden.
- if test "x$x_includes" = xNONE; then
- x_includes="${with_x}/include"
- fi
- if test "x$x_libraries" = xNONE; then
- x_libraries="${with_x}/lib"
- fi
- else
- # Check if the user has specified sysroot, but not --with-x, --x-includes or --x-libraries.
- # Make a simple check for the libraries at the sysroot, and setup --x-includes and
- # --x-libraries for the sysroot, if that seems to be correct.
- if test "x$SYSROOT" != "x"; then
- if test "x$x_includes" = xNONE; then
- if test -f "$SYSROOT/usr/X11R6/include/X11/Xlib.h"; then
- x_includes="$SYSROOT/usr/X11R6/include"
- elif test -f "$SYSROOT/usr/include/X11/Xlib.h"; then
- x_includes="$SYSROOT/usr/include"
- fi
- fi
- if test "x$x_libraries" = xNONE; then
- if test -f "$SYSROOT/usr/X11R6/lib/libX11.so"; then
- x_libraries="$SYSROOT/usr/X11R6/lib"
- elif test -f "$SYSROOT/usr/lib64/libX11.so" && test "x$OPENJDK_TARGET_CPU_BITS" = x64; then
- x_libraries="$SYSROOT/usr/lib64"
- elif test -f "$SYSROOT/usr/lib/libX11.so"; then
- x_libraries="$SYSROOT/usr/lib"
- fi
- fi
- fi
- fi
-
- # Now let autoconf do it's magic
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for X" >&5
-$as_echo_n "checking for X... " >&6; }
-
-
-# Check whether --with-x was given.
-if test "${with_x+set}" = set; then :
- withval=$with_x;
-fi
-
-# $have_x is `yes', `no', `disabled', or empty when we do not yet know.
-if test "x$with_x" = xno; then
- # The user explicitly disabled X.
- have_x=disabled
-else
- case $x_includes,$x_libraries in #(
- *\'*) as_fn_error $? "cannot use X directory names containing '" "$LINENO" 5;; #(
- *,NONE | NONE,*) if ${ac_cv_have_x+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- # One or both of the vars are not set, and there is no cached value.
-ac_x_includes=no ac_x_libraries=no
-rm -f -r conftest.dir
-if mkdir conftest.dir; then
- cd conftest.dir
- cat >Imakefile <<'_ACEOF'
-incroot:
- @echo incroot='${INCROOT}'
-usrlibdir:
- @echo usrlibdir='${USRLIBDIR}'
-libdir:
- @echo libdir='${LIBDIR}'
-_ACEOF
- if (export CC; ${XMKMF-xmkmf}) >/dev/null 2>/dev/null && test -f Makefile; then
- # GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
- for ac_var in incroot usrlibdir libdir; do
- eval "ac_im_$ac_var=\`\${MAKE-make} $ac_var 2>/dev/null | sed -n 's/^$ac_var=//p'\`"
- done
- # Open Windows xmkmf reportedly sets LIBDIR instead of USRLIBDIR.
- for ac_extension in a so sl dylib la dll; do
- if test ! -f "$ac_im_usrlibdir/libX11.$ac_extension" &&
- test -f "$ac_im_libdir/libX11.$ac_extension"; then
- ac_im_usrlibdir=$ac_im_libdir; break
- fi
- done
- # Screen out bogus values from the imake configuration. They are
- # bogus both because they are the default anyway, and because
- # using them would break gcc on systems where it needs fixed includes.
- case $ac_im_incroot in
- /usr/include) ac_x_includes= ;;
- *) test -f "$ac_im_incroot/X11/Xos.h" && ac_x_includes=$ac_im_incroot;;
- esac
- case $ac_im_usrlibdir in
- /usr/lib | /usr/lib64 | /lib | /lib64) ;;
- *) test -d "$ac_im_usrlibdir" && ac_x_libraries=$ac_im_usrlibdir ;;
- esac
- fi
- cd ..
- rm -f -r conftest.dir
-fi
-
-# Standard set of common directories for X headers.
-# Check X11 before X11Rn because it is often a symlink to the current release.
-ac_x_header_dirs='
-/usr/X11/include
-/usr/X11R7/include
-/usr/X11R6/include
-/usr/X11R5/include
-/usr/X11R4/include
-
-/usr/include/X11
-/usr/include/X11R7
-/usr/include/X11R6
-/usr/include/X11R5
-/usr/include/X11R4
-
-/usr/local/X11/include
-/usr/local/X11R7/include
-/usr/local/X11R6/include
-/usr/local/X11R5/include
-/usr/local/X11R4/include
-
-/usr/local/include/X11
-/usr/local/include/X11R7
-/usr/local/include/X11R6
-/usr/local/include/X11R5
-/usr/local/include/X11R4
-
-/usr/X386/include
-/usr/x386/include
-/usr/XFree86/include/X11
-
-/usr/include
-/usr/local/include
-/usr/unsupported/include
-/usr/athena/include
-/usr/local/x11r5/include
-/usr/lpp/Xamples/include
-
-/usr/openwin/include
-/usr/openwin/share/include'
-
-if test "$ac_x_includes" = no; then
- # Guess where to find include files, by looking for Xlib.h.
- # First, try using that file with no special directory specified.
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include
-_ACEOF
-if ac_fn_cxx_try_cpp "$LINENO"; then :
- # We can compile using X headers with no special include directory.
-ac_x_includes=
-else
- for ac_dir in $ac_x_header_dirs; do
- if test -r "$ac_dir/X11/Xlib.h"; then
- ac_x_includes=$ac_dir
- break
- fi
-done
-fi
-rm -f conftest.err conftest.i conftest.$ac_ext
-fi # $ac_x_includes = no
-
-if test "$ac_x_libraries" = no; then
- # Check for the libraries.
- # See if we find them without any special options.
- # Don't add to $LIBS permanently.
- ac_save_LIBS=$LIBS
- LIBS="-lX11 $LIBS"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include
-int
-main ()
-{
-XrmInitialize ()
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_cxx_try_link "$LINENO"; then :
- LIBS=$ac_save_LIBS
-# We can link X programs with no special library path.
-ac_x_libraries=
-else
- LIBS=$ac_save_LIBS
-for ac_dir in `$as_echo "$ac_x_includes $ac_x_header_dirs" | sed s/include/lib/g`
-do
- # Don't even attempt the hair of trying to link an X program!
- for ac_extension in a so sl dylib la dll; do
- if test -r "$ac_dir/libX11.$ac_extension"; then
- ac_x_libraries=$ac_dir
- break 2
- fi
- done
-done
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-fi # $ac_x_libraries = no
-
-case $ac_x_includes,$ac_x_libraries in #(
- no,* | *,no | *\'*)
- # Didn't find X, or a directory has "'" in its name.
- ac_cv_have_x="have_x=no";; #(
- *)
- # Record where we found X for the cache.
- ac_cv_have_x="have_x=yes\
- ac_x_includes='$ac_x_includes'\
- ac_x_libraries='$ac_x_libraries'"
-esac
-fi
-;; #(
- *) have_x=yes;;
- esac
- eval "$ac_cv_have_x"
-fi # $with_x != no
-
-if test "$have_x" != yes; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $have_x" >&5
-$as_echo "$have_x" >&6; }
- no_x=yes
-else
- # If each of the values was on the command line, it overrides each guess.
- test "x$x_includes" = xNONE && x_includes=$ac_x_includes
- test "x$x_libraries" = xNONE && x_libraries=$ac_x_libraries
- # Update the cache value to reflect the command line values.
- ac_cv_have_x="have_x=yes\
- ac_x_includes='$x_includes'\
- ac_x_libraries='$x_libraries'"
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: libraries $x_libraries, headers $x_includes" >&5
-$as_echo "libraries $x_libraries, headers $x_includes" >&6; }
-fi
-
- if test "$no_x" = yes; then
- # Not all programs may use this symbol, but it does not hurt to define it.
-
-$as_echo "#define X_DISPLAY_MISSING 1" >>confdefs.h
-
- X_CFLAGS= X_PRE_LIBS= X_LIBS= X_EXTRA_LIBS=
-else
- if test -n "$x_includes"; then
- X_CFLAGS="$X_CFLAGS -I$x_includes"
- fi
-
- # It would also be nice to do this for all -L options, not just this one.
- if test -n "$x_libraries"; then
- X_LIBS="$X_LIBS -L$x_libraries"
- # For Solaris; some versions of Sun CC require a space after -R and
- # others require no space. Words are not sufficient . . . .
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -R must be followed by a space" >&5
-$as_echo_n "checking whether -R must be followed by a space... " >&6; }
- ac_xsave_LIBS=$LIBS; LIBS="$LIBS -R$x_libraries"
- ac_xsave_cxx_werror_flag=$ac_cxx_werror_flag
- ac_cxx_werror_flag=yes
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_cxx_try_link "$LINENO"; then :
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- X_LIBS="$X_LIBS -R$x_libraries"
-else
- LIBS="$ac_xsave_LIBS -R $x_libraries"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_cxx_try_link "$LINENO"; then :
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
- X_LIBS="$X_LIBS -R $x_libraries"
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: neither works" >&5
-$as_echo "neither works" >&6; }
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
- ac_cxx_werror_flag=$ac_xsave_cxx_werror_flag
- LIBS=$ac_xsave_LIBS
- fi
-
- # Check for system-dependent libraries X programs must link with.
- # Do this before checking for the system-independent R6 libraries
- # (-lICE), since we may need -lsocket or whatever for X linking.
-
- if test "$ISC" = yes; then
- X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl_s -linet"
- else
- # Martyn Johnson says this is needed for Ultrix, if the X
- # libraries were built with DECnet support. And Karl Berry says
- # the Alpha needs dnet_stub (dnet does not exist).
- ac_xsave_LIBS="$LIBS"; LIBS="$LIBS $X_LIBS -lX11"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char XOpenDisplay ();
-int
-main ()
-{
-return XOpenDisplay ();
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_cxx_try_link "$LINENO"; then :
-
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dnet_ntoa in -ldnet" >&5
-$as_echo_n "checking for dnet_ntoa in -ldnet... " >&6; }
-if ${ac_cv_lib_dnet_dnet_ntoa+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldnet $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dnet_ntoa ();
-int
-main ()
-{
-return dnet_ntoa ();
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_cxx_try_link "$LINENO"; then :
- ac_cv_lib_dnet_dnet_ntoa=yes
-else
- ac_cv_lib_dnet_dnet_ntoa=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dnet_dnet_ntoa" >&5
-$as_echo "$ac_cv_lib_dnet_dnet_ntoa" >&6; }
-if test "x$ac_cv_lib_dnet_dnet_ntoa" = xyes; then :
- X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet"
-fi
-
- if test $ac_cv_lib_dnet_dnet_ntoa = no; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dnet_ntoa in -ldnet_stub" >&5
-$as_echo_n "checking for dnet_ntoa in -ldnet_stub... " >&6; }
-if ${ac_cv_lib_dnet_stub_dnet_ntoa+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldnet_stub $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dnet_ntoa ();
-int
-main ()
-{
-return dnet_ntoa ();
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_cxx_try_link "$LINENO"; then :
- ac_cv_lib_dnet_stub_dnet_ntoa=yes
-else
- ac_cv_lib_dnet_stub_dnet_ntoa=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dnet_stub_dnet_ntoa" >&5
-$as_echo "$ac_cv_lib_dnet_stub_dnet_ntoa" >&6; }
-if test "x$ac_cv_lib_dnet_stub_dnet_ntoa" = xyes; then :
- X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub"
-fi
-
- fi
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
- LIBS="$ac_xsave_LIBS"
-
- # msh@cis.ufl.edu says -lnsl (and -lsocket) are needed for his 386/AT,
- # to get the SysV transport functions.
- # Chad R. Larson says the Pyramis MIS-ES running DC/OSx (SVR4)
- # needs -lnsl.
- # The nsl library prevents programs from opening the X display
- # on Irix 5.2, according to T.E. Dickey.
- # The functions gethostbyname, getservbyname, and inet_addr are
- # in -lbsd on LynxOS 3.0.1/i386, according to Lars Hecking.
- ac_fn_cxx_check_func "$LINENO" "gethostbyname" "ac_cv_func_gethostbyname"
-if test "x$ac_cv_func_gethostbyname" = xyes; then :
-
-fi
-
- if test $ac_cv_func_gethostbyname = no; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for gethostbyname in -lnsl" >&5
-$as_echo_n "checking for gethostbyname in -lnsl... " >&6; }
-if ${ac_cv_lib_nsl_gethostbyname+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lnsl $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char gethostbyname ();
-int
-main ()
-{
-return gethostbyname ();
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_cxx_try_link "$LINENO"; then :
- ac_cv_lib_nsl_gethostbyname=yes
-else
- ac_cv_lib_nsl_gethostbyname=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_nsl_gethostbyname" >&5
-$as_echo "$ac_cv_lib_nsl_gethostbyname" >&6; }
-if test "x$ac_cv_lib_nsl_gethostbyname" = xyes; then :
- X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl"
-fi
-
- if test $ac_cv_lib_nsl_gethostbyname = no; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for gethostbyname in -lbsd" >&5
-$as_echo_n "checking for gethostbyname in -lbsd... " >&6; }
-if ${ac_cv_lib_bsd_gethostbyname+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lbsd $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char gethostbyname ();
-int
-main ()
-{
-return gethostbyname ();
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_cxx_try_link "$LINENO"; then :
- ac_cv_lib_bsd_gethostbyname=yes
-else
- ac_cv_lib_bsd_gethostbyname=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_bsd_gethostbyname" >&5
-$as_echo "$ac_cv_lib_bsd_gethostbyname" >&6; }
-if test "x$ac_cv_lib_bsd_gethostbyname" = xyes; then :
- X_EXTRA_LIBS="$X_EXTRA_LIBS -lbsd"
-fi
-
- fi
- fi
-
- # lieder@skyler.mavd.honeywell.com says without -lsocket,
- # socket/setsockopt and other routines are undefined under SCO ODT
- # 2.0. But -lsocket is broken on IRIX 5.2 (and is not necessary
- # on later versions), says Simon Leinen: it contains gethostby*
- # variants that don't use the name server (or something). -lsocket
- # must be given before -lnsl if both are needed. We assume that
- # if connect needs -lnsl, so does gethostbyname.
- ac_fn_cxx_check_func "$LINENO" "connect" "ac_cv_func_connect"
-if test "x$ac_cv_func_connect" = xyes; then :
-
-fi
-
- if test $ac_cv_func_connect = no; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for connect in -lsocket" >&5
-$as_echo_n "checking for connect in -lsocket... " >&6; }
-if ${ac_cv_lib_socket_connect+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lsocket $X_EXTRA_LIBS $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char connect ();
-int
-main ()
-{
-return connect ();
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_cxx_try_link "$LINENO"; then :
- ac_cv_lib_socket_connect=yes
-else
- ac_cv_lib_socket_connect=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_socket_connect" >&5
-$as_echo "$ac_cv_lib_socket_connect" >&6; }
-if test "x$ac_cv_lib_socket_connect" = xyes; then :
- X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS"
-fi
-
- fi
-
- # Guillermo Gomez says -lposix is necessary on A/UX.
- ac_fn_cxx_check_func "$LINENO" "remove" "ac_cv_func_remove"
-if test "x$ac_cv_func_remove" = xyes; then :
-
-fi
-
- if test $ac_cv_func_remove = no; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for remove in -lposix" >&5
-$as_echo_n "checking for remove in -lposix... " >&6; }
-if ${ac_cv_lib_posix_remove+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lposix $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char remove ();
-int
-main ()
-{
-return remove ();
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_cxx_try_link "$LINENO"; then :
- ac_cv_lib_posix_remove=yes
-else
- ac_cv_lib_posix_remove=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_posix_remove" >&5
-$as_echo "$ac_cv_lib_posix_remove" >&6; }
-if test "x$ac_cv_lib_posix_remove" = xyes; then :
- X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix"
-fi
-
- fi
-
- # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay.
- ac_fn_cxx_check_func "$LINENO" "shmat" "ac_cv_func_shmat"
-if test "x$ac_cv_func_shmat" = xyes; then :
-
-fi
-
- if test $ac_cv_func_shmat = no; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shmat in -lipc" >&5
-$as_echo_n "checking for shmat in -lipc... " >&6; }
-if ${ac_cv_lib_ipc_shmat+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lipc $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char shmat ();
-int
-main ()
-{
-return shmat ();
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_cxx_try_link "$LINENO"; then :
- ac_cv_lib_ipc_shmat=yes
-else
- ac_cv_lib_ipc_shmat=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_ipc_shmat" >&5
-$as_echo "$ac_cv_lib_ipc_shmat" >&6; }
-if test "x$ac_cv_lib_ipc_shmat" = xyes; then :
- X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc"
-fi
-
- fi
- fi
-
- # Check for libraries that X11R6 Xt/Xaw programs need.
- ac_save_LDFLAGS=$LDFLAGS
- test -n "$x_libraries" && LDFLAGS="$LDFLAGS -L$x_libraries"
- # SM needs ICE to (dynamically) link under SunOS 4.x (so we have to
- # check for ICE first), but we must link in the order -lSM -lICE or
- # we get undefined symbols. So assume we have SM if we have ICE.
- # These have to be linked with before -lX11, unlike the other
- # libraries we check for below, so use a different variable.
- # John Interrante, Karl Berry
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for IceConnectionNumber in -lICE" >&5
-$as_echo_n "checking for IceConnectionNumber in -lICE... " >&6; }
-if ${ac_cv_lib_ICE_IceConnectionNumber+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lICE $X_EXTRA_LIBS $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char IceConnectionNumber ();
-int
-main ()
-{
-return IceConnectionNumber ();
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_cxx_try_link "$LINENO"; then :
- ac_cv_lib_ICE_IceConnectionNumber=yes
-else
- ac_cv_lib_ICE_IceConnectionNumber=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_ICE_IceConnectionNumber" >&5
-$as_echo "$ac_cv_lib_ICE_IceConnectionNumber" >&6; }
-if test "x$ac_cv_lib_ICE_IceConnectionNumber" = xyes; then :
- X_PRE_LIBS="$X_PRE_LIBS -lSM -lICE"
-fi
-
- LDFLAGS=$ac_save_LDFLAGS
-
-fi
-
-
- # AC_PATH_XTRA creates X_LIBS and sometimes adds -R flags. When cross compiling
- # this doesn't make sense so we remove it.
- if test "x$COMPILE_TYPE" = xcross; then
- X_LIBS=`$ECHO $X_LIBS | $SED 's/-R \{0,1\}[^ ]*//g'`
- fi
-
- if test "x$no_x" = xyes; then
-
- # Print a helpful message on how to acquire the necessary build dependency.
- # x11 is the help tag: freetype, cups, alsa etc
- MISSING_DEPENDENCY=x11
-
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- cygwin_help $MISSING_DEPENDENCY
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- msys_help $MISSING_DEPENDENCY
- else
- PKGHANDLER_COMMAND=
-
- case $PKGHANDLER in
- apt-get)
- apt_help $MISSING_DEPENDENCY ;;
- yum)
- yum_help $MISSING_DEPENDENCY ;;
- brew)
- brew_help $MISSING_DEPENDENCY ;;
- port)
- port_help $MISSING_DEPENDENCY ;;
- pkgutil)
- pkgutil_help $MISSING_DEPENDENCY ;;
- pkgadd)
- pkgadd_help $MISSING_DEPENDENCY ;;
- esac
-
- if test "x$PKGHANDLER_COMMAND" != x; then
- HELP_MSG="You might be able to fix this by running '$PKGHANDLER_COMMAND'."
- fi
- fi
-
- as_fn_error $? "Could not find X11 libraries. $HELP_MSG" "$LINENO" 5
- fi
-
- if test "x$OPENJDK_TARGET_OS" = xsolaris; then
- OPENWIN_HOME="/usr/openwin"
- X_CFLAGS="-I$SYSROOT$OPENWIN_HOME/include -I$SYSROOT$OPENWIN_HOME/include/X11/extensions"
- X_LIBS="-L$SYSROOT$OPENWIN_HOME/lib$OPENJDK_TARGET_CPU_ISADIR \
- -R$OPENWIN_HOME/lib$OPENJDK_TARGET_CPU_ISADIR"
- fi
-
- ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
- OLD_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS $SYSROOT_CFLAGS $X_CFLAGS"
-
- # Need to include Xlib.h and Xutil.h to avoid "present but cannot be compiled" warnings on Solaris 10
- for ac_header in X11/extensions/shape.h X11/extensions/Xrender.h X11/extensions/XTest.h X11/Intrinsic.h
-do :
- as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "
- # include
- # include
-
-
-"
-if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
- cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
- X11_HEADERS_OK=yes
-else
- X11_HEADERS_OK=no; break
-fi
-
-done
-
-
- if test "x$X11_HEADERS_OK" = xno; then
-
- # Print a helpful message on how to acquire the necessary build dependency.
- # x11 is the help tag: freetype, cups, alsa etc
- MISSING_DEPENDENCY=x11
-
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- cygwin_help $MISSING_DEPENDENCY
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- msys_help $MISSING_DEPENDENCY
- else
- PKGHANDLER_COMMAND=
-
- case $PKGHANDLER in
- apt-get)
- apt_help $MISSING_DEPENDENCY ;;
- yum)
- yum_help $MISSING_DEPENDENCY ;;
- brew)
- brew_help $MISSING_DEPENDENCY ;;
- port)
- port_help $MISSING_DEPENDENCY ;;
- pkgutil)
- pkgutil_help $MISSING_DEPENDENCY ;;
- pkgadd)
- pkgadd_help $MISSING_DEPENDENCY ;;
- esac
-
- if test "x$PKGHANDLER_COMMAND" != x; then
- HELP_MSG="You might be able to fix this by running '$PKGHANDLER_COMMAND'."
- fi
- fi
-
- as_fn_error $? "Could not find all X11 headers (shape.h Xrender.h XTest.h Intrinsic.h). $HELP_MSG" "$LINENO" 5
- fi
-
- # If XLinearGradient isn't available in Xrender.h, signal that it needs to be
- # defined in libawt_xawt.
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if XlinearGradient is defined in Xrender.h" >&5
-$as_echo_n "checking if XlinearGradient is defined in Xrender.h... " >&6; }
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include
-int
-main ()
-{
-XLinearGradient x;
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- X_CFLAGS="$X_CFLAGS -DSOLARIS10_NO_XRENDER_STRUCTS"
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
- CFLAGS="$OLD_CFLAGS"
- ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
- fi # NEEDS_LIB_X11
-
-
-
-
-
-
-# Check whether --with-cups was given.
-if test "${with_cups+set}" = set; then :
- withval=$with_cups;
-fi
-
-
-# Check whether --with-cups-include was given.
-if test "${with_cups_include+set}" = set; then :
- withval=$with_cups_include;
-fi
-
-
- if test "x$NEEDS_LIB_CUPS" = xfalse; then
- if (test "x${with_cups}" != x && test "x${with_cups}" != xno) || \
- (test "x${with_cups_include}" != x && test "x${with_cups_include}" != xno); then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cups not used, so --with-cups[-*] is ignored" >&5
-$as_echo "$as_me: WARNING: cups not used, so --with-cups[-*] is ignored" >&2;}
- fi
- CUPS_CFLAGS=
- else
- CUPS_FOUND=no
-
- if test "x${with_cups}" = xno || test "x${with_cups_include}" = xno; then
- as_fn_error $? "It is not possible to disable the use of cups. Remove the --without-cups option." "$LINENO" 5
- fi
-
- if test "x${with_cups}" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for cups headers" >&5
-$as_echo_n "checking for cups headers... " >&6; }
- if test -s "${with_cups}/include/cups/cups.h"; then
- CUPS_CFLAGS="-I${with_cups}/include"
- CUPS_FOUND=yes
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CUPS_FOUND" >&5
-$as_echo "$CUPS_FOUND" >&6; }
- else
- as_fn_error $? "Can't find 'include/cups/cups.h' under ${with_cups} given with the --with-cups option." "$LINENO" 5
- fi
- fi
- if test "x${with_cups_include}" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for cups headers" >&5
-$as_echo_n "checking for cups headers... " >&6; }
- if test -s "${with_cups_include}/cups/cups.h"; then
- CUPS_CFLAGS="-I${with_cups_include}"
- CUPS_FOUND=yes
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CUPS_FOUND" >&5
-$as_echo "$CUPS_FOUND" >&6; }
- else
- as_fn_error $? "Can't find 'cups/cups.h' under ${with_cups_include} given with the --with-cups-include option." "$LINENO" 5
- fi
- fi
- if test "x$CUPS_FOUND" = xno; then
- # Are the cups headers installed in the default /usr/include location?
- for ac_header in cups/cups.h cups/ppd.h
-do :
- as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-ac_fn_cxx_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
-if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
- cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
- CUPS_FOUND=yes
- CUPS_CFLAGS=
- DEFAULT_CUPS=yes
-
-fi
-
-done
-
- fi
- if test "x$CUPS_FOUND" = xno; then
-
- # Print a helpful message on how to acquire the necessary build dependency.
- # cups is the help tag: freetype, cups, alsa etc
- MISSING_DEPENDENCY=cups
-
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- cygwin_help $MISSING_DEPENDENCY
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- msys_help $MISSING_DEPENDENCY
- else
- PKGHANDLER_COMMAND=
-
- case $PKGHANDLER in
- apt-get)
- apt_help $MISSING_DEPENDENCY ;;
- yum)
- yum_help $MISSING_DEPENDENCY ;;
- brew)
- brew_help $MISSING_DEPENDENCY ;;
- port)
- port_help $MISSING_DEPENDENCY ;;
- pkgutil)
- pkgutil_help $MISSING_DEPENDENCY ;;
- pkgadd)
- pkgadd_help $MISSING_DEPENDENCY ;;
- esac
-
- if test "x$PKGHANDLER_COMMAND" != x; then
- HELP_MSG="You might be able to fix this by running '$PKGHANDLER_COMMAND'."
- fi
- fi
-
- as_fn_error $? "Could not find cups! $HELP_MSG " "$LINENO" 5
- fi
- fi
-
-
-
-
-
-# Check whether --with-fontconfig was given.
-if test "${with_fontconfig+set}" = set; then :
- withval=$with_fontconfig;
-fi
-
-
-# Check whether --with-fontconfig-include was given.
-if test "${with_fontconfig_include+set}" = set; then :
- withval=$with_fontconfig_include;
-fi
-
-
- if test "x$NEEDS_LIB_FONTCONFIG" = xfalse; then
- if (test "x${with_fontconfig}" != x && test "x${with_fontconfig}" != xno) || \
- (test "x${with_fontconfig_include}" != x && test "x${with_fontconfig_include}" != xno); then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: fontconfig not used, so --with-fontconfig[-*] is ignored" >&5
-$as_echo "$as_me: WARNING: fontconfig not used, so --with-fontconfig[-*] is ignored" >&2;}
- fi
- FONTCONFIG_CFLAGS=
- else
- FONTCONFIG_FOUND=no
-
- if test "x${with_fontconfig}" = xno || test "x${with_fontconfig_include}" = xno; then
- as_fn_error $? "It is not possible to disable the use of fontconfig. Remove the --without-fontconfig option." "$LINENO" 5
- fi
-
- if test "x${with_fontconfig}" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for fontconfig headers" >&5
-$as_echo_n "checking for fontconfig headers... " >&6; }
- if test -s "${with_fontconfig}/include/fontconfig/fontconfig.h"; then
- FONTCONFIG_CFLAGS="-I${with_fontconfig}/include"
- FONTCONFIG_FOUND=yes
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $FONTCONFIG_FOUND" >&5
-$as_echo "$FONTCONFIG_FOUND" >&6; }
- else
- as_fn_error $? "Can't find 'include/fontconfig/fontconfig.h' under ${with_fontconfig} given with the --with-fontconfig option." "$LINENO" 5
- fi
- fi
- if test "x${with_fontconfig_include}" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for fontconfig headers" >&5
-$as_echo_n "checking for fontconfig headers... " >&6; }
- if test -s "${with_fontconfig_include}/fontconfig/fontconfig.h"; then
- FONTCONFIG_CFLAGS="-I${with_fontconfig_include}"
- FONTCONFIG_FOUND=yes
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $FONTCONFIG_FOUND" >&5
-$as_echo "$FONTCONFIG_FOUND" >&6; }
- else
- as_fn_error $? "Can't find 'fontconfig/fontconfig.h' under ${with_fontconfig_include} given with the --with-fontconfig-include option." "$LINENO" 5
- fi
- fi
- if test "x$FONTCONFIG_FOUND" = xno; then
- # Are the fontconfig headers installed in the default /usr/include location?
- for ac_header in fontconfig/fontconfig.h
-do :
- ac_fn_cxx_check_header_mongrel "$LINENO" "fontconfig/fontconfig.h" "ac_cv_header_fontconfig_fontconfig_h" "$ac_includes_default"
-if test "x$ac_cv_header_fontconfig_fontconfig_h" = xyes; then :
- cat >>confdefs.h <<_ACEOF
-#define HAVE_FONTCONFIG_FONTCONFIG_H 1
-_ACEOF
-
- FONTCONFIG_FOUND=yes
- FONTCONFIG_CFLAGS=
- DEFAULT_FONTCONFIG=yes
-
-fi
-
-done
-
- fi
- if test "x$FONTCONFIG_FOUND" = xno; then
-
- # Print a helpful message on how to acquire the necessary build dependency.
- # fontconfig is the help tag: freetype, cups, alsa etc
- MISSING_DEPENDENCY=fontconfig
-
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- cygwin_help $MISSING_DEPENDENCY
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- msys_help $MISSING_DEPENDENCY
- else
- PKGHANDLER_COMMAND=
-
- case $PKGHANDLER in
- apt-get)
- apt_help $MISSING_DEPENDENCY ;;
- yum)
- yum_help $MISSING_DEPENDENCY ;;
- brew)
- brew_help $MISSING_DEPENDENCY ;;
- port)
- port_help $MISSING_DEPENDENCY ;;
- pkgutil)
- pkgutil_help $MISSING_DEPENDENCY ;;
- pkgadd)
- pkgadd_help $MISSING_DEPENDENCY ;;
- esac
-
- if test "x$PKGHANDLER_COMMAND" != x; then
- HELP_MSG="You might be able to fix this by running '$PKGHANDLER_COMMAND'."
- fi
- fi
-
- as_fn_error $? "Could not find fontconfig! $HELP_MSG " "$LINENO" 5
- fi
- fi
-
-
-
-
-
-# Check whether --with-freetype was given.
-if test "${with_freetype+set}" = set; then :
- withval=$with_freetype;
-fi
-
-
-# Check whether --with-freetype-include was given.
-if test "${with_freetype_include+set}" = set; then :
- withval=$with_freetype_include;
-fi
-
-
-# Check whether --with-freetype-lib was given.
-if test "${with_freetype_lib+set}" = set; then :
- withval=$with_freetype_lib;
-fi
-
-
-# Check whether --with-freetype-src was given.
-if test "${with_freetype_src+set}" = set; then :
- withval=$with_freetype_src;
-fi
-
- # Check whether --enable-freetype-bundling was given.
-if test "${enable_freetype_bundling+set}" = set; then :
- enableval=$enable_freetype_bundling;
-fi
-
-
-# Check whether --with-freetype-license was given.
-if test "${with_freetype_license+set}" = set; then :
- withval=$with_freetype_license;
-fi
-
-
- # Need to specify explicitly since it needs to be overridden on some versions of macosx
- FREETYPE_BASE_NAME=freetype
- FREETYPE_CFLAGS=
- FREETYPE_LIBS=
- FREETYPE_BUNDLE_LIB_PATH=
-
- if test "x$NEEDS_LIB_FREETYPE" = xfalse; then
- if (test "x$with_freetype" != x && test "x$with_freetype" != xno) || \
- (test "x$with_freetype_include" != x && test "x$with_freetype_include" != xno) || \
- (test "x$with_freetype_lib" != x && test "x$with_freetype_lib" != xno) || \
- (test "x$with_freetype_src" != x && test "x$with_freetype_src" != xno); then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: freetype not used, so --with-freetype[-*] is ignored" >&5
-$as_echo "$as_me: WARNING: freetype not used, so --with-freetype[-*] is ignored" >&2;}
- fi
- if (test "x$enable_freetype_bundling" != x && test "x$enable_freetype_bundling" != xno); then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: freetype not used, so --enable-freetype-bundling is ignored" >&5
-$as_echo "$as_me: WARNING: freetype not used, so --enable-freetype-bundling is ignored" >&2;}
- fi
- else
- # freetype is needed to build; go get it!
-
- BUNDLE_FREETYPE="$enable_freetype_bundling"
-
- if test "x$with_freetype_src" != x; then
- if test "x$OPENJDK_TARGET_OS" = xwindows; then
- # Try to build freetype if --with-freetype-src was given on Windows
-
- FREETYPE_SRC_PATH="$with_freetype_src"
- BUILD_FREETYPE=yes
-
- # Check if the freetype sources are acessible..
- if ! test -d $FREETYPE_SRC_PATH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: --with-freetype-src specified, but can not find path \"$FREETYPE_SRC_PATH\" - ignoring --with-freetype-src" >&5
-$as_echo "$as_me: WARNING: --with-freetype-src specified, but can not find path \"$FREETYPE_SRC_PATH\" - ignoring --with-freetype-src" >&2;}
- BUILD_FREETYPE=no
- fi
- # ..and contain a vc2010 project file
- vcxproj_path="$FREETYPE_SRC_PATH/builds/windows/vc2010/freetype.vcxproj"
- if test "x$BUILD_FREETYPE" = xyes && ! test -s $vcxproj_path; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Can not find project file $vcxproj_path (you may try a newer freetype version) - ignoring --with-freetype-src" >&5
-$as_echo "$as_me: WARNING: Can not find project file $vcxproj_path (you may try a newer freetype version) - ignoring --with-freetype-src" >&2;}
- BUILD_FREETYPE=no
- fi
- # Now check if configure found a version of 'msbuild.exe'
- if test "x$BUILD_FREETYPE" = xyes && test "x$MSBUILD" == x ; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Can not find an msbuild.exe executable (you may try to install .NET 4.0) - ignoring --with-freetype-src" >&5
-$as_echo "$as_me: WARNING: Can not find an msbuild.exe executable (you may try to install .NET 4.0) - ignoring --with-freetype-src" >&2;}
- BUILD_FREETYPE=no
- fi
-
- # Ready to go..
- if test "x$BUILD_FREETYPE" = xyes; then
- # msbuild requires trailing slashes for output directories
- freetype_lib_path="$FREETYPE_SRC_PATH/lib$OPENJDK_TARGET_CPU_BITS/"
- freetype_lib_path_unix="$freetype_lib_path"
- freetype_obj_path="$FREETYPE_SRC_PATH/obj$OPENJDK_TARGET_CPU_BITS/"
-
- unix_path="$vcxproj_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- windows_path=`$CYGPATH -m "$unix_path"`
- vcxproj_path="$windows_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- windows_path=`cmd //c echo $unix_path`
- vcxproj_path="$windows_path"
- fi
-
-
- unix_path="$freetype_lib_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- windows_path=`$CYGPATH -m "$unix_path"`
- freetype_lib_path="$windows_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- windows_path=`cmd //c echo $unix_path`
- freetype_lib_path="$windows_path"
- fi
-
-
- unix_path="$freetype_obj_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- windows_path=`$CYGPATH -m "$unix_path"`
- freetype_obj_path="$windows_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- windows_path=`cmd //c echo $unix_path`
- freetype_obj_path="$windows_path"
- fi
-
- if test "x$OPENJDK_TARGET_CPU_BITS" = x64; then
- freetype_platform=x64
- else
- freetype_platform=win32
- fi
-
- # The original freetype project file is for VS 2010 (i.e. 'v100'),
- # so we have to adapt the toolset if building with any other toolsed (i.e. SDK).
- # Currently 'PLATFORM_TOOLSET' is set in 'TOOLCHAIN_CHECK_POSSIBLE_VISUAL_STUDIO_ROOT'/
- # 'TOOLCHAIN_CHECK_POSSIBLE_WIN_SDK_ROOT' in toolchain_windows.m4
- { $as_echo "$as_me:${as_lineno-$LINENO}: Trying to compile freetype sources with PlatformToolset=$PLATFORM_TOOLSET to $freetype_lib_path_unix ..." >&5
-$as_echo "$as_me: Trying to compile freetype sources with PlatformToolset=$PLATFORM_TOOLSET to $freetype_lib_path_unix ..." >&6;}
-
- # First we try to build the freetype.dll
- $ECHO -e "@echo off\n"\
- "$MSBUILD $vcxproj_path "\
- "/p:PlatformToolset=$PLATFORM_TOOLSET "\
- "/p:Configuration=\"Release Multithreaded\" "\
- "/p:Platform=$freetype_platform "\
- "/p:ConfigurationType=DynamicLibrary "\
- "/p:TargetName=freetype "\
- "/p:OutDir=\"$freetype_lib_path\" "\
- "/p:IntDir=\"$freetype_obj_path\" > freetype.log" > freetype.bat
- cmd /c freetype.bat
-
- if test -s "$freetype_lib_path_unix/freetype.dll"; then
- # If that succeeds we also build freetype.lib
- $ECHO -e "@echo off\n"\
- "$MSBUILD $vcxproj_path "\
- "/p:PlatformToolset=$PLATFORM_TOOLSET "\
- "/p:Configuration=\"Release Multithreaded\" "\
- "/p:Platform=$freetype_platform "\
- "/p:ConfigurationType=StaticLibrary "\
- "/p:TargetName=freetype "\
- "/p:OutDir=\"$freetype_lib_path\" "\
- "/p:IntDir=\"$freetype_obj_path\" >> freetype.log" > freetype.bat
- cmd /c freetype.bat
-
- if test -s "$freetype_lib_path_unix/freetype.lib"; then
- # Once we build both, lib and dll, set freetype lib and include path appropriately
- POTENTIAL_FREETYPE_INCLUDE_PATH="$FREETYPE_SRC_PATH/include"
- POTENTIAL_FREETYPE_LIB_PATH="$freetype_lib_path_unix"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Compiling freetype sources succeeded! (see freetype.log for build results)" >&5
-$as_echo "$as_me: Compiling freetype sources succeeded! (see freetype.log for build results)" >&6;}
- else
- BUILD_FREETYPE=no
- fi
- else
- BUILD_FREETYPE=no
- fi
- fi
-
- if test "x$BUILD_FREETYPE" = xyes; then
- # Okay, we built it. Check that it works.
-
- POTENTIAL_FREETYPE_INCLUDE_PATH="$POTENTIAL_FREETYPE_INCLUDE_PATH"
- POTENTIAL_FREETYPE_LIB_PATH="$POTENTIAL_FREETYPE_LIB_PATH"
- METHOD="--with-freetype-src"
-
- # Let's start with an optimistic view of the world :-)
- FOUND_FREETYPE=yes
-
- # First look for the canonical freetype main include file ft2build.h.
- if ! test -s "$POTENTIAL_FREETYPE_INCLUDE_PATH/ft2build.h"; then
- # Oh no! Let's try in the freetype2 directory. This is needed at least at Mac OS X Yosemite.
- POTENTIAL_FREETYPE_INCLUDE_PATH="$POTENTIAL_FREETYPE_INCLUDE_PATH/freetype2"
- if ! test -s "$POTENTIAL_FREETYPE_INCLUDE_PATH/ft2build.h"; then
- # Fail.
- FOUND_FREETYPE=no
- fi
- fi
-
- if test "x$FOUND_FREETYPE" = xyes; then
- # Include file found, let's continue the sanity check.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found freetype include files at $POTENTIAL_FREETYPE_INCLUDE_PATH using $METHOD" >&5
-$as_echo "$as_me: Found freetype include files at $POTENTIAL_FREETYPE_INCLUDE_PATH using $METHOD" >&6;}
-
- # Reset to default value
- FREETYPE_BASE_NAME=freetype
- FREETYPE_LIB_NAME="${LIBRARY_PREFIX}${FREETYPE_BASE_NAME}${SHARED_LIBRARY_SUFFIX}"
- if ! test -s "$POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME"; then
- if test "x$OPENJDK_TARGET_OS" = xmacosx \
- && test -s "$POTENTIAL_FREETYPE_LIB_PATH/${LIBRARY_PREFIX}freetype.6${SHARED_LIBRARY_SUFFIX}"; then
- # On Mac OS X Yosemite, the symlink from libfreetype.dylib to libfreetype.6.dylib disappeared. Check
- # for the .6 version explicitly.
- FREETYPE_BASE_NAME=freetype.6
- FREETYPE_LIB_NAME="${LIBRARY_PREFIX}${FREETYPE_BASE_NAME}${SHARED_LIBRARY_SUFFIX}"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Compensating for missing symlink by using version 6 explicitly" >&5
-$as_echo "$as_me: Compensating for missing symlink by using version 6 explicitly" >&6;}
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME. Ignoring location." >&5
-$as_echo "$as_me: Could not find $POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME. Ignoring location." >&6;}
- FOUND_FREETYPE=no
- fi
- else
- if test "x$OPENJDK_TARGET_OS" = xwindows; then
- # On Windows, we will need both .lib and .dll file.
- if ! test -s "$POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib. Ignoring location." >&5
-$as_echo "$as_me: Could not find $POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib. Ignoring location." >&6;}
- FOUND_FREETYPE=no
- fi
- elif test "x$OPENJDK_TARGET_OS" = xsolaris \
- && test -s "$POTENTIAL_FREETYPE_LIB_PATH$OPENJDK_TARGET_CPU_ISADIR/$FREETYPE_LIB_NAME"; then
- # Found lib in isa dir, use that instead.
- POTENTIAL_FREETYPE_LIB_PATH="$POTENTIAL_FREETYPE_LIB_PATH$OPENJDK_TARGET_CPU_ISADIR"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting to use $POTENTIAL_FREETYPE_LIB_PATH instead" >&5
-$as_echo "$as_me: Rewriting to use $POTENTIAL_FREETYPE_LIB_PATH instead" >&6;}
- fi
- fi
- fi
-
- if test "x$FOUND_FREETYPE" = xyes; then
-
- # Only process if variable expands to non-empty
-
- if test "x$POTENTIAL_FREETYPE_INCLUDE_PATH" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- path="$POTENTIAL_FREETYPE_INCLUDE_PATH"
- new_path=`$CYGPATH -u "$path"`
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file precense.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Cannot locate the the path of POTENTIAL_FREETYPE_INCLUDE_PATH" "$LINENO" 5
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
-
- if test "x$path" != "x$new_path"; then
- POTENTIAL_FREETYPE_INCLUDE_PATH="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting POTENTIAL_FREETYPE_INCLUDE_PATH to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting POTENTIAL_FREETYPE_INCLUDE_PATH to \"$new_path\"" >&6;}
- fi
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- path="$POTENTIAL_FREETYPE_INCLUDE_PATH"
- has_colon=`$ECHO $path | $GREP ^.:`
- new_path="$path"
- if test "x$has_colon" = x; then
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $path`
- fi
-
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- if test "x$path" != "x$new_path"; then
- POTENTIAL_FREETYPE_INCLUDE_PATH="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting POTENTIAL_FREETYPE_INCLUDE_PATH to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting POTENTIAL_FREETYPE_INCLUDE_PATH to \"$new_path\"" >&6;}
- fi
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
-
- else
- # We're on a unix platform. Hooray! :)
- path="$POTENTIAL_FREETYPE_INCLUDE_PATH"
- has_space=`$ECHO "$path" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
- fi
-
- # Use eval to expand a potential ~
- eval path="$path"
- if test ! -f "$path" && test ! -d "$path"; then
- as_fn_error $? "The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is not found." "$LINENO" 5
- fi
-
- if test -d "$path"; then
- POTENTIAL_FREETYPE_INCLUDE_PATH="`cd "$path"; $THEPWDCMD -L`"
- else
- dir="`$DIRNAME "$path"`"
- base="`$BASENAME "$path"`"
- POTENTIAL_FREETYPE_INCLUDE_PATH="`cd "$dir"; $THEPWDCMD -L`/$base"
- fi
- fi
- fi
-
-
- # Only process if variable expands to non-empty
-
- if test "x$POTENTIAL_FREETYPE_LIB_PATH" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- path="$POTENTIAL_FREETYPE_LIB_PATH"
- new_path=`$CYGPATH -u "$path"`
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file precense.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Cannot locate the the path of POTENTIAL_FREETYPE_LIB_PATH" "$LINENO" 5
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
-
- if test "x$path" != "x$new_path"; then
- POTENTIAL_FREETYPE_LIB_PATH="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting POTENTIAL_FREETYPE_LIB_PATH to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting POTENTIAL_FREETYPE_LIB_PATH to \"$new_path\"" >&6;}
- fi
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- path="$POTENTIAL_FREETYPE_LIB_PATH"
- has_colon=`$ECHO $path | $GREP ^.:`
- new_path="$path"
- if test "x$has_colon" = x; then
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $path`
- fi
-
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- if test "x$path" != "x$new_path"; then
- POTENTIAL_FREETYPE_LIB_PATH="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting POTENTIAL_FREETYPE_LIB_PATH to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting POTENTIAL_FREETYPE_LIB_PATH to \"$new_path\"" >&6;}
- fi
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
-
- else
- # We're on a unix platform. Hooray! :)
- path="$POTENTIAL_FREETYPE_LIB_PATH"
- has_space=`$ECHO "$path" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
- fi
-
- # Use eval to expand a potential ~
- eval path="$path"
- if test ! -f "$path" && test ! -d "$path"; then
- as_fn_error $? "The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is not found." "$LINENO" 5
- fi
-
- if test -d "$path"; then
- POTENTIAL_FREETYPE_LIB_PATH="`cd "$path"; $THEPWDCMD -L`"
- else
- dir="`$DIRNAME "$path"`"
- base="`$BASENAME "$path"`"
- POTENTIAL_FREETYPE_LIB_PATH="`cd "$dir"; $THEPWDCMD -L`/$base"
- fi
- fi
- fi
-
-
- FREETYPE_INCLUDE_PATH="$POTENTIAL_FREETYPE_INCLUDE_PATH"
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for freetype includes" >&5
-$as_echo_n "checking for freetype includes... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $FREETYPE_INCLUDE_PATH" >&5
-$as_echo "$FREETYPE_INCLUDE_PATH" >&6; }
- FREETYPE_LIB_PATH="$POTENTIAL_FREETYPE_LIB_PATH"
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for freetype libraries" >&5
-$as_echo_n "checking for freetype libraries... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $FREETYPE_LIB_PATH" >&5
-$as_echo "$FREETYPE_LIB_PATH" >&6; }
- fi
-
- if test "x$FOUND_FREETYPE" != xyes; then
- as_fn_error $? "Can not use the built freetype at location given by --with-freetype-src" "$LINENO" 5
- fi
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: User specified --with-freetype-src but building freetype failed. (see freetype.log for build results)" >&5
-$as_echo "$as_me: User specified --with-freetype-src but building freetype failed. (see freetype.log for build results)" >&6;}
- as_fn_error $? "Consider building freetype manually and using --with-freetype instead." "$LINENO" 5
- fi
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: --with-freetype-src is currently only supported on Windows - ignoring" >&5
-$as_echo "$as_me: WARNING: --with-freetype-src is currently only supported on Windows - ignoring" >&2;}
- fi
- fi
-
- if test "x$with_freetype" != x || test "x$with_freetype_include" != x || test "x$with_freetype_lib" != x; then
- # User has specified settings
-
- if test "x$BUNDLE_FREETYPE" = x; then
- # If not specified, default is to bundle freetype
- BUNDLE_FREETYPE=yes
- fi
-
- if test "x$with_freetype" != x; then
- POTENTIAL_FREETYPE_INCLUDE_PATH="$with_freetype/include"
- POTENTIAL_FREETYPE_LIB_PATH="$with_freetype/lib"
- fi
-
- # Allow --with-freetype-lib and --with-freetype-include to override
- if test "x$with_freetype_include" != x; then
- POTENTIAL_FREETYPE_INCLUDE_PATH="$with_freetype_include"
- fi
- if test "x$with_freetype_lib" != x; then
- POTENTIAL_FREETYPE_LIB_PATH="$with_freetype_lib"
- fi
-
- if test "x$POTENTIAL_FREETYPE_INCLUDE_PATH" != x && test "x$POTENTIAL_FREETYPE_LIB_PATH" != x; then
- # Okay, we got it. Check that it works.
-
- POTENTIAL_FREETYPE_INCLUDE_PATH="$POTENTIAL_FREETYPE_INCLUDE_PATH"
- POTENTIAL_FREETYPE_LIB_PATH="$POTENTIAL_FREETYPE_LIB_PATH"
- METHOD="--with-freetype"
-
- # Let's start with an optimistic view of the world :-)
- FOUND_FREETYPE=yes
-
- # First look for the canonical freetype main include file ft2build.h.
- if ! test -s "$POTENTIAL_FREETYPE_INCLUDE_PATH/ft2build.h"; then
- # Oh no! Let's try in the freetype2 directory. This is needed at least at Mac OS X Yosemite.
- POTENTIAL_FREETYPE_INCLUDE_PATH="$POTENTIAL_FREETYPE_INCLUDE_PATH/freetype2"
- if ! test -s "$POTENTIAL_FREETYPE_INCLUDE_PATH/ft2build.h"; then
- # Fail.
- FOUND_FREETYPE=no
- fi
- fi
-
- if test "x$FOUND_FREETYPE" = xyes; then
- # Include file found, let's continue the sanity check.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found freetype include files at $POTENTIAL_FREETYPE_INCLUDE_PATH using $METHOD" >&5
-$as_echo "$as_me: Found freetype include files at $POTENTIAL_FREETYPE_INCLUDE_PATH using $METHOD" >&6;}
-
- # Reset to default value
- FREETYPE_BASE_NAME=freetype
- FREETYPE_LIB_NAME="${LIBRARY_PREFIX}${FREETYPE_BASE_NAME}${SHARED_LIBRARY_SUFFIX}"
- if ! test -s "$POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME"; then
- if test "x$OPENJDK_TARGET_OS" = xmacosx \
- && test -s "$POTENTIAL_FREETYPE_LIB_PATH/${LIBRARY_PREFIX}freetype.6${SHARED_LIBRARY_SUFFIX}"; then
- # On Mac OS X Yosemite, the symlink from libfreetype.dylib to libfreetype.6.dylib disappeared. Check
- # for the .6 version explicitly.
- FREETYPE_BASE_NAME=freetype.6
- FREETYPE_LIB_NAME="${LIBRARY_PREFIX}${FREETYPE_BASE_NAME}${SHARED_LIBRARY_SUFFIX}"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Compensating for missing symlink by using version 6 explicitly" >&5
-$as_echo "$as_me: Compensating for missing symlink by using version 6 explicitly" >&6;}
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME. Ignoring location." >&5
-$as_echo "$as_me: Could not find $POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME. Ignoring location." >&6;}
- FOUND_FREETYPE=no
- fi
- else
- if test "x$OPENJDK_TARGET_OS" = xwindows; then
- # On Windows, we will need both .lib and .dll file.
- if ! test -s "$POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib. Ignoring location." >&5
-$as_echo "$as_me: Could not find $POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib. Ignoring location." >&6;}
- FOUND_FREETYPE=no
- fi
- elif test "x$OPENJDK_TARGET_OS" = xsolaris \
- && test -s "$POTENTIAL_FREETYPE_LIB_PATH$OPENJDK_TARGET_CPU_ISADIR/$FREETYPE_LIB_NAME"; then
- # Found lib in isa dir, use that instead.
- POTENTIAL_FREETYPE_LIB_PATH="$POTENTIAL_FREETYPE_LIB_PATH$OPENJDK_TARGET_CPU_ISADIR"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting to use $POTENTIAL_FREETYPE_LIB_PATH instead" >&5
-$as_echo "$as_me: Rewriting to use $POTENTIAL_FREETYPE_LIB_PATH instead" >&6;}
- fi
- fi
- fi
-
- if test "x$FOUND_FREETYPE" = xyes; then
-
- # Only process if variable expands to non-empty
-
- if test "x$POTENTIAL_FREETYPE_INCLUDE_PATH" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- path="$POTENTIAL_FREETYPE_INCLUDE_PATH"
- new_path=`$CYGPATH -u "$path"`
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file precense.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Cannot locate the the path of POTENTIAL_FREETYPE_INCLUDE_PATH" "$LINENO" 5
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
-
- if test "x$path" != "x$new_path"; then
- POTENTIAL_FREETYPE_INCLUDE_PATH="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting POTENTIAL_FREETYPE_INCLUDE_PATH to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting POTENTIAL_FREETYPE_INCLUDE_PATH to \"$new_path\"" >&6;}
- fi
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- path="$POTENTIAL_FREETYPE_INCLUDE_PATH"
- has_colon=`$ECHO $path | $GREP ^.:`
- new_path="$path"
- if test "x$has_colon" = x; then
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $path`
- fi
-
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- if test "x$path" != "x$new_path"; then
- POTENTIAL_FREETYPE_INCLUDE_PATH="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting POTENTIAL_FREETYPE_INCLUDE_PATH to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting POTENTIAL_FREETYPE_INCLUDE_PATH to \"$new_path\"" >&6;}
- fi
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
-
- else
- # We're on a unix platform. Hooray! :)
- path="$POTENTIAL_FREETYPE_INCLUDE_PATH"
- has_space=`$ECHO "$path" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
- fi
-
- # Use eval to expand a potential ~
- eval path="$path"
- if test ! -f "$path" && test ! -d "$path"; then
- as_fn_error $? "The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is not found." "$LINENO" 5
- fi
-
- if test -d "$path"; then
- POTENTIAL_FREETYPE_INCLUDE_PATH="`cd "$path"; $THEPWDCMD -L`"
- else
- dir="`$DIRNAME "$path"`"
- base="`$BASENAME "$path"`"
- POTENTIAL_FREETYPE_INCLUDE_PATH="`cd "$dir"; $THEPWDCMD -L`/$base"
- fi
- fi
- fi
-
-
- # Only process if variable expands to non-empty
-
- if test "x$POTENTIAL_FREETYPE_LIB_PATH" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- path="$POTENTIAL_FREETYPE_LIB_PATH"
- new_path=`$CYGPATH -u "$path"`
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file precense.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Cannot locate the the path of POTENTIAL_FREETYPE_LIB_PATH" "$LINENO" 5
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
-
- if test "x$path" != "x$new_path"; then
- POTENTIAL_FREETYPE_LIB_PATH="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting POTENTIAL_FREETYPE_LIB_PATH to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting POTENTIAL_FREETYPE_LIB_PATH to \"$new_path\"" >&6;}
- fi
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- path="$POTENTIAL_FREETYPE_LIB_PATH"
- has_colon=`$ECHO $path | $GREP ^.:`
- new_path="$path"
- if test "x$has_colon" = x; then
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $path`
- fi
-
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- if test "x$path" != "x$new_path"; then
- POTENTIAL_FREETYPE_LIB_PATH="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting POTENTIAL_FREETYPE_LIB_PATH to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting POTENTIAL_FREETYPE_LIB_PATH to \"$new_path\"" >&6;}
- fi
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
-
- else
- # We're on a unix platform. Hooray! :)
- path="$POTENTIAL_FREETYPE_LIB_PATH"
- has_space=`$ECHO "$path" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
- fi
-
- # Use eval to expand a potential ~
- eval path="$path"
- if test ! -f "$path" && test ! -d "$path"; then
- as_fn_error $? "The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is not found." "$LINENO" 5
- fi
-
- if test -d "$path"; then
- POTENTIAL_FREETYPE_LIB_PATH="`cd "$path"; $THEPWDCMD -L`"
- else
- dir="`$DIRNAME "$path"`"
- base="`$BASENAME "$path"`"
- POTENTIAL_FREETYPE_LIB_PATH="`cd "$dir"; $THEPWDCMD -L`/$base"
- fi
- fi
- fi
-
-
- FREETYPE_INCLUDE_PATH="$POTENTIAL_FREETYPE_INCLUDE_PATH"
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for freetype includes" >&5
-$as_echo_n "checking for freetype includes... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $FREETYPE_INCLUDE_PATH" >&5
-$as_echo "$FREETYPE_INCLUDE_PATH" >&6; }
- FREETYPE_LIB_PATH="$POTENTIAL_FREETYPE_LIB_PATH"
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for freetype libraries" >&5
-$as_echo_n "checking for freetype libraries... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $FREETYPE_LIB_PATH" >&5
-$as_echo "$FREETYPE_LIB_PATH" >&6; }
- fi
-
- if test "x$FOUND_FREETYPE" != xyes; then
- as_fn_error $? "Can not find or use freetype at location given by --with-freetype" "$LINENO" 5
- fi
- else
- # User specified only one of lib or include. This is an error.
- if test "x$POTENTIAL_FREETYPE_INCLUDE_PATH" = x ; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: User specified --with-freetype-lib but not --with-freetype-include" >&5
-$as_echo "$as_me: User specified --with-freetype-lib but not --with-freetype-include" >&6;}
- as_fn_error $? "Need both freetype lib and include paths. Consider using --with-freetype instead." "$LINENO" 5
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: User specified --with-freetype-include but not --with-freetype-lib" >&5
-$as_echo "$as_me: User specified --with-freetype-include but not --with-freetype-lib" >&6;}
- as_fn_error $? "Need both freetype lib and include paths. Consider using --with-freetype instead." "$LINENO" 5
- fi
- fi
- else
- # User did not specify settings, but we need freetype. Try to locate it.
-
- if test "x$BUNDLE_FREETYPE" = x; then
- # If not specified, default is to bundle freetype only on windows
- if test "x$OPENJDK_TARGET_OS" = xwindows; then
- BUNDLE_FREETYPE=yes
- else
- BUNDLE_FREETYPE=no
- fi
- fi
-
- # If we have a sysroot, assume that's where we are supposed to look and skip pkg-config.
- if test "x$SYSROOT" = x; then
- if test "x$FOUND_FREETYPE" != xyes; then
- # Check modules using pkg-config, but only if we have it (ugly output results otherwise)
- if test "x$PKG_CONFIG" != x; then
-
-pkg_failed=no
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for FREETYPE" >&5
-$as_echo_n "checking for FREETYPE... " >&6; }
-
-if test -n "$FREETYPE_CFLAGS"; then
- pkg_cv_FREETYPE_CFLAGS="$FREETYPE_CFLAGS"
- elif test -n "$PKG_CONFIG"; then
- if test -n "$PKG_CONFIG" && \
- { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"freetype2\""; } >&5
- ($PKG_CONFIG --exists --print-errors "freetype2") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; then
- pkg_cv_FREETYPE_CFLAGS=`$PKG_CONFIG --cflags "freetype2" 2>/dev/null`
-else
- pkg_failed=yes
-fi
- else
- pkg_failed=untried
-fi
-if test -n "$FREETYPE_LIBS"; then
- pkg_cv_FREETYPE_LIBS="$FREETYPE_LIBS"
- elif test -n "$PKG_CONFIG"; then
- if test -n "$PKG_CONFIG" && \
- { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"freetype2\""; } >&5
- ($PKG_CONFIG --exists --print-errors "freetype2") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; then
- pkg_cv_FREETYPE_LIBS=`$PKG_CONFIG --libs "freetype2" 2>/dev/null`
-else
- pkg_failed=yes
-fi
- else
- pkg_failed=untried
-fi
-
-
-
-if test $pkg_failed = yes; then
-
-if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
- _pkg_short_errors_supported=yes
-else
- _pkg_short_errors_supported=no
-fi
- if test $_pkg_short_errors_supported = yes; then
- FREETYPE_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "freetype2" 2>&1`
- else
- FREETYPE_PKG_ERRORS=`$PKG_CONFIG --print-errors "freetype2" 2>&1`
- fi
- # Put the nasty error message in config.log where it belongs
- echo "$FREETYPE_PKG_ERRORS" >&5
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- FOUND_FREETYPE=no
-elif test $pkg_failed = untried; then
- FOUND_FREETYPE=no
-else
- FREETYPE_CFLAGS=$pkg_cv_FREETYPE_CFLAGS
- FREETYPE_LIBS=$pkg_cv_FREETYPE_LIBS
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
- FOUND_FREETYPE=yes
-fi
- if test "x$FOUND_FREETYPE" = xyes; then
- # On solaris, pkg_check adds -lz to freetype libs, which isn't necessary for us.
- FREETYPE_LIBS=`$ECHO $FREETYPE_LIBS | $SED 's/-lz//g'`
- # 64-bit libs for Solaris x86 are installed in the amd64 subdirectory, change lib to lib/amd64
- if test "x$OPENJDK_TARGET_OS" = xsolaris && test "x$OPENJDK_TARGET_CPU" = xx86_64; then
- FREETYPE_LIBS=`$ECHO $FREETYPE_LIBS | $SED 's?/lib?/lib/amd64?g'`
- fi
- # PKG_CHECK_MODULES will set FREETYPE_CFLAGS and _LIBS, but we don't get a lib path for bundling.
- if test "x$BUNDLE_FREETYPE" = xyes; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found freetype using pkg-config, but ignoring since we can not bundle that" >&5
-$as_echo "$as_me: Found freetype using pkg-config, but ignoring since we can not bundle that" >&6;}
- FOUND_FREETYPE=no
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for freetype" >&5
-$as_echo_n "checking for freetype... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes (using pkg-config)" >&5
-$as_echo "yes (using pkg-config)" >&6; }
- fi
- fi
- fi
- fi
- fi
-
- if test "x$FOUND_FREETYPE" != xyes; then
- # Check in well-known locations
- if test "x$OPENJDK_TARGET_OS" = xwindows; then
- FREETYPE_BASE_DIR="$PROGRAMFILES/GnuWin32"
-
- windows_path="$FREETYPE_BASE_DIR"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- FREETYPE_BASE_DIR="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- FREETYPE_BASE_DIR="$unix_path"
- fi
-
-
- POTENTIAL_FREETYPE_INCLUDE_PATH="$FREETYPE_BASE_DIR/include"
- POTENTIAL_FREETYPE_LIB_PATH="$FREETYPE_BASE_DIR/lib"
- METHOD="well-known location"
-
- # Let's start with an optimistic view of the world :-)
- FOUND_FREETYPE=yes
-
- # First look for the canonical freetype main include file ft2build.h.
- if ! test -s "$POTENTIAL_FREETYPE_INCLUDE_PATH/ft2build.h"; then
- # Oh no! Let's try in the freetype2 directory. This is needed at least at Mac OS X Yosemite.
- POTENTIAL_FREETYPE_INCLUDE_PATH="$POTENTIAL_FREETYPE_INCLUDE_PATH/freetype2"
- if ! test -s "$POTENTIAL_FREETYPE_INCLUDE_PATH/ft2build.h"; then
- # Fail.
- FOUND_FREETYPE=no
- fi
- fi
-
- if test "x$FOUND_FREETYPE" = xyes; then
- # Include file found, let's continue the sanity check.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found freetype include files at $POTENTIAL_FREETYPE_INCLUDE_PATH using $METHOD" >&5
-$as_echo "$as_me: Found freetype include files at $POTENTIAL_FREETYPE_INCLUDE_PATH using $METHOD" >&6;}
-
- # Reset to default value
- FREETYPE_BASE_NAME=freetype
- FREETYPE_LIB_NAME="${LIBRARY_PREFIX}${FREETYPE_BASE_NAME}${SHARED_LIBRARY_SUFFIX}"
- if ! test -s "$POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME"; then
- if test "x$OPENJDK_TARGET_OS" = xmacosx \
- && test -s "$POTENTIAL_FREETYPE_LIB_PATH/${LIBRARY_PREFIX}freetype.6${SHARED_LIBRARY_SUFFIX}"; then
- # On Mac OS X Yosemite, the symlink from libfreetype.dylib to libfreetype.6.dylib disappeared. Check
- # for the .6 version explicitly.
- FREETYPE_BASE_NAME=freetype.6
- FREETYPE_LIB_NAME="${LIBRARY_PREFIX}${FREETYPE_BASE_NAME}${SHARED_LIBRARY_SUFFIX}"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Compensating for missing symlink by using version 6 explicitly" >&5
-$as_echo "$as_me: Compensating for missing symlink by using version 6 explicitly" >&6;}
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME. Ignoring location." >&5
-$as_echo "$as_me: Could not find $POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME. Ignoring location." >&6;}
- FOUND_FREETYPE=no
- fi
- else
- if test "x$OPENJDK_TARGET_OS" = xwindows; then
- # On Windows, we will need both .lib and .dll file.
- if ! test -s "$POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib. Ignoring location." >&5
-$as_echo "$as_me: Could not find $POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib. Ignoring location." >&6;}
- FOUND_FREETYPE=no
- fi
- elif test "x$OPENJDK_TARGET_OS" = xsolaris \
- && test -s "$POTENTIAL_FREETYPE_LIB_PATH$OPENJDK_TARGET_CPU_ISADIR/$FREETYPE_LIB_NAME"; then
- # Found lib in isa dir, use that instead.
- POTENTIAL_FREETYPE_LIB_PATH="$POTENTIAL_FREETYPE_LIB_PATH$OPENJDK_TARGET_CPU_ISADIR"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting to use $POTENTIAL_FREETYPE_LIB_PATH instead" >&5
-$as_echo "$as_me: Rewriting to use $POTENTIAL_FREETYPE_LIB_PATH instead" >&6;}
- fi
- fi
- fi
-
- if test "x$FOUND_FREETYPE" = xyes; then
-
- # Only process if variable expands to non-empty
-
- if test "x$POTENTIAL_FREETYPE_INCLUDE_PATH" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- path="$POTENTIAL_FREETYPE_INCLUDE_PATH"
- new_path=`$CYGPATH -u "$path"`
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file precense.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Cannot locate the the path of POTENTIAL_FREETYPE_INCLUDE_PATH" "$LINENO" 5
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
-
- if test "x$path" != "x$new_path"; then
- POTENTIAL_FREETYPE_INCLUDE_PATH="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting POTENTIAL_FREETYPE_INCLUDE_PATH to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting POTENTIAL_FREETYPE_INCLUDE_PATH to \"$new_path\"" >&6;}
- fi
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- path="$POTENTIAL_FREETYPE_INCLUDE_PATH"
- has_colon=`$ECHO $path | $GREP ^.:`
- new_path="$path"
- if test "x$has_colon" = x; then
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $path`
- fi
-
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- if test "x$path" != "x$new_path"; then
- POTENTIAL_FREETYPE_INCLUDE_PATH="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting POTENTIAL_FREETYPE_INCLUDE_PATH to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting POTENTIAL_FREETYPE_INCLUDE_PATH to \"$new_path\"" >&6;}
- fi
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
-
- else
- # We're on a unix platform. Hooray! :)
- path="$POTENTIAL_FREETYPE_INCLUDE_PATH"
- has_space=`$ECHO "$path" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
- fi
-
- # Use eval to expand a potential ~
- eval path="$path"
- if test ! -f "$path" && test ! -d "$path"; then
- as_fn_error $? "The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is not found." "$LINENO" 5
- fi
-
- if test -d "$path"; then
- POTENTIAL_FREETYPE_INCLUDE_PATH="`cd "$path"; $THEPWDCMD -L`"
- else
- dir="`$DIRNAME "$path"`"
- base="`$BASENAME "$path"`"
- POTENTIAL_FREETYPE_INCLUDE_PATH="`cd "$dir"; $THEPWDCMD -L`/$base"
- fi
- fi
- fi
-
-
- # Only process if variable expands to non-empty
-
- if test "x$POTENTIAL_FREETYPE_LIB_PATH" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- path="$POTENTIAL_FREETYPE_LIB_PATH"
- new_path=`$CYGPATH -u "$path"`
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file precense.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Cannot locate the the path of POTENTIAL_FREETYPE_LIB_PATH" "$LINENO" 5
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
-
- if test "x$path" != "x$new_path"; then
- POTENTIAL_FREETYPE_LIB_PATH="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting POTENTIAL_FREETYPE_LIB_PATH to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting POTENTIAL_FREETYPE_LIB_PATH to \"$new_path\"" >&6;}
- fi
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- path="$POTENTIAL_FREETYPE_LIB_PATH"
- has_colon=`$ECHO $path | $GREP ^.:`
- new_path="$path"
- if test "x$has_colon" = x; then
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $path`
- fi
-
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- if test "x$path" != "x$new_path"; then
- POTENTIAL_FREETYPE_LIB_PATH="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting POTENTIAL_FREETYPE_LIB_PATH to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting POTENTIAL_FREETYPE_LIB_PATH to \"$new_path\"" >&6;}
- fi
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
-
- else
- # We're on a unix platform. Hooray! :)
- path="$POTENTIAL_FREETYPE_LIB_PATH"
- has_space=`$ECHO "$path" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
- fi
-
- # Use eval to expand a potential ~
- eval path="$path"
- if test ! -f "$path" && test ! -d "$path"; then
- as_fn_error $? "The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is not found." "$LINENO" 5
- fi
-
- if test -d "$path"; then
- POTENTIAL_FREETYPE_LIB_PATH="`cd "$path"; $THEPWDCMD -L`"
- else
- dir="`$DIRNAME "$path"`"
- base="`$BASENAME "$path"`"
- POTENTIAL_FREETYPE_LIB_PATH="`cd "$dir"; $THEPWDCMD -L`/$base"
- fi
- fi
- fi
-
-
- FREETYPE_INCLUDE_PATH="$POTENTIAL_FREETYPE_INCLUDE_PATH"
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for freetype includes" >&5
-$as_echo_n "checking for freetype includes... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $FREETYPE_INCLUDE_PATH" >&5
-$as_echo "$FREETYPE_INCLUDE_PATH" >&6; }
- FREETYPE_LIB_PATH="$POTENTIAL_FREETYPE_LIB_PATH"
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for freetype libraries" >&5
-$as_echo_n "checking for freetype libraries... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $FREETYPE_LIB_PATH" >&5
-$as_echo "$FREETYPE_LIB_PATH" >&6; }
- fi
-
- if test "x$FOUND_FREETYPE" != xyes; then
- FREETYPE_BASE_DIR="$ProgramW6432/GnuWin32"
-
- windows_path="$FREETYPE_BASE_DIR"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- FREETYPE_BASE_DIR="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- FREETYPE_BASE_DIR="$unix_path"
- fi
-
-
- POTENTIAL_FREETYPE_INCLUDE_PATH="$FREETYPE_BASE_DIR/include"
- POTENTIAL_FREETYPE_LIB_PATH="$FREETYPE_BASE_DIR/lib"
- METHOD="well-known location"
-
- # Let's start with an optimistic view of the world :-)
- FOUND_FREETYPE=yes
-
- # First look for the canonical freetype main include file ft2build.h.
- if ! test -s "$POTENTIAL_FREETYPE_INCLUDE_PATH/ft2build.h"; then
- # Oh no! Let's try in the freetype2 directory. This is needed at least at Mac OS X Yosemite.
- POTENTIAL_FREETYPE_INCLUDE_PATH="$POTENTIAL_FREETYPE_INCLUDE_PATH/freetype2"
- if ! test -s "$POTENTIAL_FREETYPE_INCLUDE_PATH/ft2build.h"; then
- # Fail.
- FOUND_FREETYPE=no
- fi
- fi
-
- if test "x$FOUND_FREETYPE" = xyes; then
- # Include file found, let's continue the sanity check.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found freetype include files at $POTENTIAL_FREETYPE_INCLUDE_PATH using $METHOD" >&5
-$as_echo "$as_me: Found freetype include files at $POTENTIAL_FREETYPE_INCLUDE_PATH using $METHOD" >&6;}
-
- # Reset to default value
- FREETYPE_BASE_NAME=freetype
- FREETYPE_LIB_NAME="${LIBRARY_PREFIX}${FREETYPE_BASE_NAME}${SHARED_LIBRARY_SUFFIX}"
- if ! test -s "$POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME"; then
- if test "x$OPENJDK_TARGET_OS" = xmacosx \
- && test -s "$POTENTIAL_FREETYPE_LIB_PATH/${LIBRARY_PREFIX}freetype.6${SHARED_LIBRARY_SUFFIX}"; then
- # On Mac OS X Yosemite, the symlink from libfreetype.dylib to libfreetype.6.dylib disappeared. Check
- # for the .6 version explicitly.
- FREETYPE_BASE_NAME=freetype.6
- FREETYPE_LIB_NAME="${LIBRARY_PREFIX}${FREETYPE_BASE_NAME}${SHARED_LIBRARY_SUFFIX}"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Compensating for missing symlink by using version 6 explicitly" >&5
-$as_echo "$as_me: Compensating for missing symlink by using version 6 explicitly" >&6;}
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME. Ignoring location." >&5
-$as_echo "$as_me: Could not find $POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME. Ignoring location." >&6;}
- FOUND_FREETYPE=no
- fi
- else
- if test "x$OPENJDK_TARGET_OS" = xwindows; then
- # On Windows, we will need both .lib and .dll file.
- if ! test -s "$POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib. Ignoring location." >&5
-$as_echo "$as_me: Could not find $POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib. Ignoring location." >&6;}
- FOUND_FREETYPE=no
- fi
- elif test "x$OPENJDK_TARGET_OS" = xsolaris \
- && test -s "$POTENTIAL_FREETYPE_LIB_PATH$OPENJDK_TARGET_CPU_ISADIR/$FREETYPE_LIB_NAME"; then
- # Found lib in isa dir, use that instead.
- POTENTIAL_FREETYPE_LIB_PATH="$POTENTIAL_FREETYPE_LIB_PATH$OPENJDK_TARGET_CPU_ISADIR"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting to use $POTENTIAL_FREETYPE_LIB_PATH instead" >&5
-$as_echo "$as_me: Rewriting to use $POTENTIAL_FREETYPE_LIB_PATH instead" >&6;}
- fi
- fi
- fi
-
- if test "x$FOUND_FREETYPE" = xyes; then
-
- # Only process if variable expands to non-empty
-
- if test "x$POTENTIAL_FREETYPE_INCLUDE_PATH" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- path="$POTENTIAL_FREETYPE_INCLUDE_PATH"
- new_path=`$CYGPATH -u "$path"`
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file precense.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Cannot locate the the path of POTENTIAL_FREETYPE_INCLUDE_PATH" "$LINENO" 5
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
-
- if test "x$path" != "x$new_path"; then
- POTENTIAL_FREETYPE_INCLUDE_PATH="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting POTENTIAL_FREETYPE_INCLUDE_PATH to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting POTENTIAL_FREETYPE_INCLUDE_PATH to \"$new_path\"" >&6;}
- fi
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- path="$POTENTIAL_FREETYPE_INCLUDE_PATH"
- has_colon=`$ECHO $path | $GREP ^.:`
- new_path="$path"
- if test "x$has_colon" = x; then
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $path`
- fi
-
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- if test "x$path" != "x$new_path"; then
- POTENTIAL_FREETYPE_INCLUDE_PATH="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting POTENTIAL_FREETYPE_INCLUDE_PATH to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting POTENTIAL_FREETYPE_INCLUDE_PATH to \"$new_path\"" >&6;}
- fi
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
-
- else
- # We're on a unix platform. Hooray! :)
- path="$POTENTIAL_FREETYPE_INCLUDE_PATH"
- has_space=`$ECHO "$path" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
- fi
-
- # Use eval to expand a potential ~
- eval path="$path"
- if test ! -f "$path" && test ! -d "$path"; then
- as_fn_error $? "The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is not found." "$LINENO" 5
- fi
-
- if test -d "$path"; then
- POTENTIAL_FREETYPE_INCLUDE_PATH="`cd "$path"; $THEPWDCMD -L`"
- else
- dir="`$DIRNAME "$path"`"
- base="`$BASENAME "$path"`"
- POTENTIAL_FREETYPE_INCLUDE_PATH="`cd "$dir"; $THEPWDCMD -L`/$base"
- fi
- fi
- fi
-
-
- # Only process if variable expands to non-empty
-
- if test "x$POTENTIAL_FREETYPE_LIB_PATH" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- path="$POTENTIAL_FREETYPE_LIB_PATH"
- new_path=`$CYGPATH -u "$path"`
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file precense.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Cannot locate the the path of POTENTIAL_FREETYPE_LIB_PATH" "$LINENO" 5
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
-
- if test "x$path" != "x$new_path"; then
- POTENTIAL_FREETYPE_LIB_PATH="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting POTENTIAL_FREETYPE_LIB_PATH to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting POTENTIAL_FREETYPE_LIB_PATH to \"$new_path\"" >&6;}
- fi
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- path="$POTENTIAL_FREETYPE_LIB_PATH"
- has_colon=`$ECHO $path | $GREP ^.:`
- new_path="$path"
- if test "x$has_colon" = x; then
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $path`
- fi
-
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- if test "x$path" != "x$new_path"; then
- POTENTIAL_FREETYPE_LIB_PATH="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting POTENTIAL_FREETYPE_LIB_PATH to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting POTENTIAL_FREETYPE_LIB_PATH to \"$new_path\"" >&6;}
- fi
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
-
- else
- # We're on a unix platform. Hooray! :)
- path="$POTENTIAL_FREETYPE_LIB_PATH"
- has_space=`$ECHO "$path" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
- fi
-
- # Use eval to expand a potential ~
- eval path="$path"
- if test ! -f "$path" && test ! -d "$path"; then
- as_fn_error $? "The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is not found." "$LINENO" 5
- fi
-
- if test -d "$path"; then
- POTENTIAL_FREETYPE_LIB_PATH="`cd "$path"; $THEPWDCMD -L`"
- else
- dir="`$DIRNAME "$path"`"
- base="`$BASENAME "$path"`"
- POTENTIAL_FREETYPE_LIB_PATH="`cd "$dir"; $THEPWDCMD -L`/$base"
- fi
- fi
- fi
-
-
- FREETYPE_INCLUDE_PATH="$POTENTIAL_FREETYPE_INCLUDE_PATH"
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for freetype includes" >&5
-$as_echo_n "checking for freetype includes... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $FREETYPE_INCLUDE_PATH" >&5
-$as_echo "$FREETYPE_INCLUDE_PATH" >&6; }
- FREETYPE_LIB_PATH="$POTENTIAL_FREETYPE_LIB_PATH"
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for freetype libraries" >&5
-$as_echo_n "checking for freetype libraries... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $FREETYPE_LIB_PATH" >&5
-$as_echo "$FREETYPE_LIB_PATH" >&6; }
- fi
-
- fi
- if test "x$FOUND_FREETYPE" != xyes; then
- FREETYPE_BASE_DIR="$HOME/freetype"
-
- windows_path="$FREETYPE_BASE_DIR"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- FREETYPE_BASE_DIR="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- FREETYPE_BASE_DIR="$unix_path"
- fi
-
- if test "x$OPENJDK_TARGET_CPU_BITS" = x64; then
-
- POTENTIAL_FREETYPE_INCLUDE_PATH="$FREETYPE_BASE_DIR/include"
- POTENTIAL_FREETYPE_LIB_PATH="$FREETYPE_BASE_DIR/lib64"
- METHOD="well-known location"
-
- # Let's start with an optimistic view of the world :-)
- FOUND_FREETYPE=yes
-
- # First look for the canonical freetype main include file ft2build.h.
- if ! test -s "$POTENTIAL_FREETYPE_INCLUDE_PATH/ft2build.h"; then
- # Oh no! Let's try in the freetype2 directory. This is needed at least at Mac OS X Yosemite.
- POTENTIAL_FREETYPE_INCLUDE_PATH="$POTENTIAL_FREETYPE_INCLUDE_PATH/freetype2"
- if ! test -s "$POTENTIAL_FREETYPE_INCLUDE_PATH/ft2build.h"; then
- # Fail.
- FOUND_FREETYPE=no
- fi
- fi
-
- if test "x$FOUND_FREETYPE" = xyes; then
- # Include file found, let's continue the sanity check.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found freetype include files at $POTENTIAL_FREETYPE_INCLUDE_PATH using $METHOD" >&5
-$as_echo "$as_me: Found freetype include files at $POTENTIAL_FREETYPE_INCLUDE_PATH using $METHOD" >&6;}
-
- # Reset to default value
- FREETYPE_BASE_NAME=freetype
- FREETYPE_LIB_NAME="${LIBRARY_PREFIX}${FREETYPE_BASE_NAME}${SHARED_LIBRARY_SUFFIX}"
- if ! test -s "$POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME"; then
- if test "x$OPENJDK_TARGET_OS" = xmacosx \
- && test -s "$POTENTIAL_FREETYPE_LIB_PATH/${LIBRARY_PREFIX}freetype.6${SHARED_LIBRARY_SUFFIX}"; then
- # On Mac OS X Yosemite, the symlink from libfreetype.dylib to libfreetype.6.dylib disappeared. Check
- # for the .6 version explicitly.
- FREETYPE_BASE_NAME=freetype.6
- FREETYPE_LIB_NAME="${LIBRARY_PREFIX}${FREETYPE_BASE_NAME}${SHARED_LIBRARY_SUFFIX}"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Compensating for missing symlink by using version 6 explicitly" >&5
-$as_echo "$as_me: Compensating for missing symlink by using version 6 explicitly" >&6;}
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME. Ignoring location." >&5
-$as_echo "$as_me: Could not find $POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME. Ignoring location." >&6;}
- FOUND_FREETYPE=no
- fi
- else
- if test "x$OPENJDK_TARGET_OS" = xwindows; then
- # On Windows, we will need both .lib and .dll file.
- if ! test -s "$POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib. Ignoring location." >&5
-$as_echo "$as_me: Could not find $POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib. Ignoring location." >&6;}
- FOUND_FREETYPE=no
- fi
- elif test "x$OPENJDK_TARGET_OS" = xsolaris \
- && test -s "$POTENTIAL_FREETYPE_LIB_PATH$OPENJDK_TARGET_CPU_ISADIR/$FREETYPE_LIB_NAME"; then
- # Found lib in isa dir, use that instead.
- POTENTIAL_FREETYPE_LIB_PATH="$POTENTIAL_FREETYPE_LIB_PATH$OPENJDK_TARGET_CPU_ISADIR"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting to use $POTENTIAL_FREETYPE_LIB_PATH instead" >&5
-$as_echo "$as_me: Rewriting to use $POTENTIAL_FREETYPE_LIB_PATH instead" >&6;}
- fi
- fi
- fi
-
- if test "x$FOUND_FREETYPE" = xyes; then
-
- # Only process if variable expands to non-empty
-
- if test "x$POTENTIAL_FREETYPE_INCLUDE_PATH" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- path="$POTENTIAL_FREETYPE_INCLUDE_PATH"
- new_path=`$CYGPATH -u "$path"`
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file precense.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Cannot locate the the path of POTENTIAL_FREETYPE_INCLUDE_PATH" "$LINENO" 5
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
-
- if test "x$path" != "x$new_path"; then
- POTENTIAL_FREETYPE_INCLUDE_PATH="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting POTENTIAL_FREETYPE_INCLUDE_PATH to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting POTENTIAL_FREETYPE_INCLUDE_PATH to \"$new_path\"" >&6;}
- fi
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- path="$POTENTIAL_FREETYPE_INCLUDE_PATH"
- has_colon=`$ECHO $path | $GREP ^.:`
- new_path="$path"
- if test "x$has_colon" = x; then
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $path`
- fi
-
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- if test "x$path" != "x$new_path"; then
- POTENTIAL_FREETYPE_INCLUDE_PATH="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting POTENTIAL_FREETYPE_INCLUDE_PATH to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting POTENTIAL_FREETYPE_INCLUDE_PATH to \"$new_path\"" >&6;}
- fi
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
-
- else
- # We're on a unix platform. Hooray! :)
- path="$POTENTIAL_FREETYPE_INCLUDE_PATH"
- has_space=`$ECHO "$path" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
- fi
-
- # Use eval to expand a potential ~
- eval path="$path"
- if test ! -f "$path" && test ! -d "$path"; then
- as_fn_error $? "The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is not found." "$LINENO" 5
- fi
-
- if test -d "$path"; then
- POTENTIAL_FREETYPE_INCLUDE_PATH="`cd "$path"; $THEPWDCMD -L`"
- else
- dir="`$DIRNAME "$path"`"
- base="`$BASENAME "$path"`"
- POTENTIAL_FREETYPE_INCLUDE_PATH="`cd "$dir"; $THEPWDCMD -L`/$base"
- fi
- fi
- fi
-
-
- # Only process if variable expands to non-empty
-
- if test "x$POTENTIAL_FREETYPE_LIB_PATH" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- path="$POTENTIAL_FREETYPE_LIB_PATH"
- new_path=`$CYGPATH -u "$path"`
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file precense.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Cannot locate the the path of POTENTIAL_FREETYPE_LIB_PATH" "$LINENO" 5
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
-
- if test "x$path" != "x$new_path"; then
- POTENTIAL_FREETYPE_LIB_PATH="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting POTENTIAL_FREETYPE_LIB_PATH to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting POTENTIAL_FREETYPE_LIB_PATH to \"$new_path\"" >&6;}
- fi
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- path="$POTENTIAL_FREETYPE_LIB_PATH"
- has_colon=`$ECHO $path | $GREP ^.:`
- new_path="$path"
- if test "x$has_colon" = x; then
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $path`
- fi
-
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- if test "x$path" != "x$new_path"; then
- POTENTIAL_FREETYPE_LIB_PATH="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting POTENTIAL_FREETYPE_LIB_PATH to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting POTENTIAL_FREETYPE_LIB_PATH to \"$new_path\"" >&6;}
- fi
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
-
- else
- # We're on a unix platform. Hooray! :)
- path="$POTENTIAL_FREETYPE_LIB_PATH"
- has_space=`$ECHO "$path" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
- fi
-
- # Use eval to expand a potential ~
- eval path="$path"
- if test ! -f "$path" && test ! -d "$path"; then
- as_fn_error $? "The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is not found." "$LINENO" 5
- fi
-
- if test -d "$path"; then
- POTENTIAL_FREETYPE_LIB_PATH="`cd "$path"; $THEPWDCMD -L`"
- else
- dir="`$DIRNAME "$path"`"
- base="`$BASENAME "$path"`"
- POTENTIAL_FREETYPE_LIB_PATH="`cd "$dir"; $THEPWDCMD -L`/$base"
- fi
- fi
- fi
-
-
- FREETYPE_INCLUDE_PATH="$POTENTIAL_FREETYPE_INCLUDE_PATH"
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for freetype includes" >&5
-$as_echo_n "checking for freetype includes... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $FREETYPE_INCLUDE_PATH" >&5
-$as_echo "$FREETYPE_INCLUDE_PATH" >&6; }
- FREETYPE_LIB_PATH="$POTENTIAL_FREETYPE_LIB_PATH"
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for freetype libraries" >&5
-$as_echo_n "checking for freetype libraries... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $FREETYPE_LIB_PATH" >&5
-$as_echo "$FREETYPE_LIB_PATH" >&6; }
- fi
-
- else
-
- POTENTIAL_FREETYPE_INCLUDE_PATH="$FREETYPE_BASE_DIR/include"
- POTENTIAL_FREETYPE_LIB_PATH="$FREETYPE_BASE_DIR/lib32"
- METHOD="well-known location"
-
- # Let's start with an optimistic view of the world :-)
- FOUND_FREETYPE=yes
-
- # First look for the canonical freetype main include file ft2build.h.
- if ! test -s "$POTENTIAL_FREETYPE_INCLUDE_PATH/ft2build.h"; then
- # Oh no! Let's try in the freetype2 directory. This is needed at least at Mac OS X Yosemite.
- POTENTIAL_FREETYPE_INCLUDE_PATH="$POTENTIAL_FREETYPE_INCLUDE_PATH/freetype2"
- if ! test -s "$POTENTIAL_FREETYPE_INCLUDE_PATH/ft2build.h"; then
- # Fail.
- FOUND_FREETYPE=no
- fi
- fi
-
- if test "x$FOUND_FREETYPE" = xyes; then
- # Include file found, let's continue the sanity check.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found freetype include files at $POTENTIAL_FREETYPE_INCLUDE_PATH using $METHOD" >&5
-$as_echo "$as_me: Found freetype include files at $POTENTIAL_FREETYPE_INCLUDE_PATH using $METHOD" >&6;}
-
- # Reset to default value
- FREETYPE_BASE_NAME=freetype
- FREETYPE_LIB_NAME="${LIBRARY_PREFIX}${FREETYPE_BASE_NAME}${SHARED_LIBRARY_SUFFIX}"
- if ! test -s "$POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME"; then
- if test "x$OPENJDK_TARGET_OS" = xmacosx \
- && test -s "$POTENTIAL_FREETYPE_LIB_PATH/${LIBRARY_PREFIX}freetype.6${SHARED_LIBRARY_SUFFIX}"; then
- # On Mac OS X Yosemite, the symlink from libfreetype.dylib to libfreetype.6.dylib disappeared. Check
- # for the .6 version explicitly.
- FREETYPE_BASE_NAME=freetype.6
- FREETYPE_LIB_NAME="${LIBRARY_PREFIX}${FREETYPE_BASE_NAME}${SHARED_LIBRARY_SUFFIX}"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Compensating for missing symlink by using version 6 explicitly" >&5
-$as_echo "$as_me: Compensating for missing symlink by using version 6 explicitly" >&6;}
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME. Ignoring location." >&5
-$as_echo "$as_me: Could not find $POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME. Ignoring location." >&6;}
- FOUND_FREETYPE=no
- fi
- else
- if test "x$OPENJDK_TARGET_OS" = xwindows; then
- # On Windows, we will need both .lib and .dll file.
- if ! test -s "$POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib. Ignoring location." >&5
-$as_echo "$as_me: Could not find $POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib. Ignoring location." >&6;}
- FOUND_FREETYPE=no
- fi
- elif test "x$OPENJDK_TARGET_OS" = xsolaris \
- && test -s "$POTENTIAL_FREETYPE_LIB_PATH$OPENJDK_TARGET_CPU_ISADIR/$FREETYPE_LIB_NAME"; then
- # Found lib in isa dir, use that instead.
- POTENTIAL_FREETYPE_LIB_PATH="$POTENTIAL_FREETYPE_LIB_PATH$OPENJDK_TARGET_CPU_ISADIR"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting to use $POTENTIAL_FREETYPE_LIB_PATH instead" >&5
-$as_echo "$as_me: Rewriting to use $POTENTIAL_FREETYPE_LIB_PATH instead" >&6;}
- fi
- fi
- fi
-
- if test "x$FOUND_FREETYPE" = xyes; then
-
- # Only process if variable expands to non-empty
-
- if test "x$POTENTIAL_FREETYPE_INCLUDE_PATH" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- path="$POTENTIAL_FREETYPE_INCLUDE_PATH"
- new_path=`$CYGPATH -u "$path"`
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file precense.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Cannot locate the the path of POTENTIAL_FREETYPE_INCLUDE_PATH" "$LINENO" 5
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
-
- if test "x$path" != "x$new_path"; then
- POTENTIAL_FREETYPE_INCLUDE_PATH="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting POTENTIAL_FREETYPE_INCLUDE_PATH to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting POTENTIAL_FREETYPE_INCLUDE_PATH to \"$new_path\"" >&6;}
- fi
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- path="$POTENTIAL_FREETYPE_INCLUDE_PATH"
- has_colon=`$ECHO $path | $GREP ^.:`
- new_path="$path"
- if test "x$has_colon" = x; then
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $path`
- fi
-
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- if test "x$path" != "x$new_path"; then
- POTENTIAL_FREETYPE_INCLUDE_PATH="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting POTENTIAL_FREETYPE_INCLUDE_PATH to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting POTENTIAL_FREETYPE_INCLUDE_PATH to \"$new_path\"" >&6;}
- fi
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
-
- else
- # We're on a unix platform. Hooray! :)
- path="$POTENTIAL_FREETYPE_INCLUDE_PATH"
- has_space=`$ECHO "$path" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
- fi
-
- # Use eval to expand a potential ~
- eval path="$path"
- if test ! -f "$path" && test ! -d "$path"; then
- as_fn_error $? "The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is not found." "$LINENO" 5
- fi
-
- if test -d "$path"; then
- POTENTIAL_FREETYPE_INCLUDE_PATH="`cd "$path"; $THEPWDCMD -L`"
- else
- dir="`$DIRNAME "$path"`"
- base="`$BASENAME "$path"`"
- POTENTIAL_FREETYPE_INCLUDE_PATH="`cd "$dir"; $THEPWDCMD -L`/$base"
- fi
- fi
- fi
-
-
- # Only process if variable expands to non-empty
-
- if test "x$POTENTIAL_FREETYPE_LIB_PATH" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- path="$POTENTIAL_FREETYPE_LIB_PATH"
- new_path=`$CYGPATH -u "$path"`
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file precense.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Cannot locate the the path of POTENTIAL_FREETYPE_LIB_PATH" "$LINENO" 5
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
-
- if test "x$path" != "x$new_path"; then
- POTENTIAL_FREETYPE_LIB_PATH="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting POTENTIAL_FREETYPE_LIB_PATH to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting POTENTIAL_FREETYPE_LIB_PATH to \"$new_path\"" >&6;}
- fi
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- path="$POTENTIAL_FREETYPE_LIB_PATH"
- has_colon=`$ECHO $path | $GREP ^.:`
- new_path="$path"
- if test "x$has_colon" = x; then
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $path`
- fi
-
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- if test "x$path" != "x$new_path"; then
- POTENTIAL_FREETYPE_LIB_PATH="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting POTENTIAL_FREETYPE_LIB_PATH to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting POTENTIAL_FREETYPE_LIB_PATH to \"$new_path\"" >&6;}
- fi
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
-
- else
- # We're on a unix platform. Hooray! :)
- path="$POTENTIAL_FREETYPE_LIB_PATH"
- has_space=`$ECHO "$path" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
- fi
-
- # Use eval to expand a potential ~
- eval path="$path"
- if test ! -f "$path" && test ! -d "$path"; then
- as_fn_error $? "The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is not found." "$LINENO" 5
- fi
-
- if test -d "$path"; then
- POTENTIAL_FREETYPE_LIB_PATH="`cd "$path"; $THEPWDCMD -L`"
- else
- dir="`$DIRNAME "$path"`"
- base="`$BASENAME "$path"`"
- POTENTIAL_FREETYPE_LIB_PATH="`cd "$dir"; $THEPWDCMD -L`/$base"
- fi
- fi
- fi
-
-
- FREETYPE_INCLUDE_PATH="$POTENTIAL_FREETYPE_INCLUDE_PATH"
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for freetype includes" >&5
-$as_echo_n "checking for freetype includes... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $FREETYPE_INCLUDE_PATH" >&5
-$as_echo "$FREETYPE_INCLUDE_PATH" >&6; }
- FREETYPE_LIB_PATH="$POTENTIAL_FREETYPE_LIB_PATH"
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for freetype libraries" >&5
-$as_echo_n "checking for freetype libraries... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $FREETYPE_LIB_PATH" >&5
-$as_echo "$FREETYPE_LIB_PATH" >&6; }
- fi
-
- fi
- if test "x$FOUND_FREETYPE" != xyes && test -d $FREETYPE_BASE_DIR \
- && test -s "$FREETYPE_BASE_DIR/builds/windows/vc2010/freetype.vcxproj" && test "x$MSBUILD" != x; then
- # Source is available, as a last resort try to build freetype in default location
-
- FREETYPE_SRC_PATH="$FREETYPE_BASE_DIR"
- BUILD_FREETYPE=yes
-
- # Check if the freetype sources are acessible..
- if ! test -d $FREETYPE_SRC_PATH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: --with-freetype-src specified, but can not find path \"$FREETYPE_SRC_PATH\" - ignoring --with-freetype-src" >&5
-$as_echo "$as_me: WARNING: --with-freetype-src specified, but can not find path \"$FREETYPE_SRC_PATH\" - ignoring --with-freetype-src" >&2;}
- BUILD_FREETYPE=no
- fi
- # ..and contain a vc2010 project file
- vcxproj_path="$FREETYPE_SRC_PATH/builds/windows/vc2010/freetype.vcxproj"
- if test "x$BUILD_FREETYPE" = xyes && ! test -s $vcxproj_path; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Can not find project file $vcxproj_path (you may try a newer freetype version) - ignoring --with-freetype-src" >&5
-$as_echo "$as_me: WARNING: Can not find project file $vcxproj_path (you may try a newer freetype version) - ignoring --with-freetype-src" >&2;}
- BUILD_FREETYPE=no
- fi
- # Now check if configure found a version of 'msbuild.exe'
- if test "x$BUILD_FREETYPE" = xyes && test "x$MSBUILD" == x ; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Can not find an msbuild.exe executable (you may try to install .NET 4.0) - ignoring --with-freetype-src" >&5
-$as_echo "$as_me: WARNING: Can not find an msbuild.exe executable (you may try to install .NET 4.0) - ignoring --with-freetype-src" >&2;}
- BUILD_FREETYPE=no
- fi
-
- # Ready to go..
- if test "x$BUILD_FREETYPE" = xyes; then
- # msbuild requires trailing slashes for output directories
- freetype_lib_path="$FREETYPE_SRC_PATH/lib$OPENJDK_TARGET_CPU_BITS/"
- freetype_lib_path_unix="$freetype_lib_path"
- freetype_obj_path="$FREETYPE_SRC_PATH/obj$OPENJDK_TARGET_CPU_BITS/"
-
- unix_path="$vcxproj_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- windows_path=`$CYGPATH -m "$unix_path"`
- vcxproj_path="$windows_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- windows_path=`cmd //c echo $unix_path`
- vcxproj_path="$windows_path"
- fi
-
-
- unix_path="$freetype_lib_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- windows_path=`$CYGPATH -m "$unix_path"`
- freetype_lib_path="$windows_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- windows_path=`cmd //c echo $unix_path`
- freetype_lib_path="$windows_path"
- fi
-
-
- unix_path="$freetype_obj_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- windows_path=`$CYGPATH -m "$unix_path"`
- freetype_obj_path="$windows_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- windows_path=`cmd //c echo $unix_path`
- freetype_obj_path="$windows_path"
- fi
-
- if test "x$OPENJDK_TARGET_CPU_BITS" = x64; then
- freetype_platform=x64
- else
- freetype_platform=win32
- fi
-
- # The original freetype project file is for VS 2010 (i.e. 'v100'),
- # so we have to adapt the toolset if building with any other toolsed (i.e. SDK).
- # Currently 'PLATFORM_TOOLSET' is set in 'TOOLCHAIN_CHECK_POSSIBLE_VISUAL_STUDIO_ROOT'/
- # 'TOOLCHAIN_CHECK_POSSIBLE_WIN_SDK_ROOT' in toolchain_windows.m4
- { $as_echo "$as_me:${as_lineno-$LINENO}: Trying to compile freetype sources with PlatformToolset=$PLATFORM_TOOLSET to $freetype_lib_path_unix ..." >&5
-$as_echo "$as_me: Trying to compile freetype sources with PlatformToolset=$PLATFORM_TOOLSET to $freetype_lib_path_unix ..." >&6;}
-
- # First we try to build the freetype.dll
- $ECHO -e "@echo off\n"\
- "$MSBUILD $vcxproj_path "\
- "/p:PlatformToolset=$PLATFORM_TOOLSET "\
- "/p:Configuration=\"Release Multithreaded\" "\
- "/p:Platform=$freetype_platform "\
- "/p:ConfigurationType=DynamicLibrary "\
- "/p:TargetName=freetype "\
- "/p:OutDir=\"$freetype_lib_path\" "\
- "/p:IntDir=\"$freetype_obj_path\" > freetype.log" > freetype.bat
- cmd /c freetype.bat
-
- if test -s "$freetype_lib_path_unix/freetype.dll"; then
- # If that succeeds we also build freetype.lib
- $ECHO -e "@echo off\n"\
- "$MSBUILD $vcxproj_path "\
- "/p:PlatformToolset=$PLATFORM_TOOLSET "\
- "/p:Configuration=\"Release Multithreaded\" "\
- "/p:Platform=$freetype_platform "\
- "/p:ConfigurationType=StaticLibrary "\
- "/p:TargetName=freetype "\
- "/p:OutDir=\"$freetype_lib_path\" "\
- "/p:IntDir=\"$freetype_obj_path\" >> freetype.log" > freetype.bat
- cmd /c freetype.bat
-
- if test -s "$freetype_lib_path_unix/freetype.lib"; then
- # Once we build both, lib and dll, set freetype lib and include path appropriately
- POTENTIAL_FREETYPE_INCLUDE_PATH="$FREETYPE_SRC_PATH/include"
- POTENTIAL_FREETYPE_LIB_PATH="$freetype_lib_path_unix"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Compiling freetype sources succeeded! (see freetype.log for build results)" >&5
-$as_echo "$as_me: Compiling freetype sources succeeded! (see freetype.log for build results)" >&6;}
- else
- BUILD_FREETYPE=no
- fi
- else
- BUILD_FREETYPE=no
- fi
- fi
-
- if test "x$OPENJDK_TARGET_CPU_BITS" = x64; then
-
- POTENTIAL_FREETYPE_INCLUDE_PATH="$FREETYPE_BASE_DIR/include"
- POTENTIAL_FREETYPE_LIB_PATH="$FREETYPE_BASE_DIR/lib64"
- METHOD="well-known location"
-
- # Let's start with an optimistic view of the world :-)
- FOUND_FREETYPE=yes
-
- # First look for the canonical freetype main include file ft2build.h.
- if ! test -s "$POTENTIAL_FREETYPE_INCLUDE_PATH/ft2build.h"; then
- # Oh no! Let's try in the freetype2 directory. This is needed at least at Mac OS X Yosemite.
- POTENTIAL_FREETYPE_INCLUDE_PATH="$POTENTIAL_FREETYPE_INCLUDE_PATH/freetype2"
- if ! test -s "$POTENTIAL_FREETYPE_INCLUDE_PATH/ft2build.h"; then
- # Fail.
- FOUND_FREETYPE=no
- fi
- fi
-
- if test "x$FOUND_FREETYPE" = xyes; then
- # Include file found, let's continue the sanity check.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found freetype include files at $POTENTIAL_FREETYPE_INCLUDE_PATH using $METHOD" >&5
-$as_echo "$as_me: Found freetype include files at $POTENTIAL_FREETYPE_INCLUDE_PATH using $METHOD" >&6;}
-
- # Reset to default value
- FREETYPE_BASE_NAME=freetype
- FREETYPE_LIB_NAME="${LIBRARY_PREFIX}${FREETYPE_BASE_NAME}${SHARED_LIBRARY_SUFFIX}"
- if ! test -s "$POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME"; then
- if test "x$OPENJDK_TARGET_OS" = xmacosx \
- && test -s "$POTENTIAL_FREETYPE_LIB_PATH/${LIBRARY_PREFIX}freetype.6${SHARED_LIBRARY_SUFFIX}"; then
- # On Mac OS X Yosemite, the symlink from libfreetype.dylib to libfreetype.6.dylib disappeared. Check
- # for the .6 version explicitly.
- FREETYPE_BASE_NAME=freetype.6
- FREETYPE_LIB_NAME="${LIBRARY_PREFIX}${FREETYPE_BASE_NAME}${SHARED_LIBRARY_SUFFIX}"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Compensating for missing symlink by using version 6 explicitly" >&5
-$as_echo "$as_me: Compensating for missing symlink by using version 6 explicitly" >&6;}
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME. Ignoring location." >&5
-$as_echo "$as_me: Could not find $POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME. Ignoring location." >&6;}
- FOUND_FREETYPE=no
- fi
- else
- if test "x$OPENJDK_TARGET_OS" = xwindows; then
- # On Windows, we will need both .lib and .dll file.
- if ! test -s "$POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib. Ignoring location." >&5
-$as_echo "$as_me: Could not find $POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib. Ignoring location." >&6;}
- FOUND_FREETYPE=no
- fi
- elif test "x$OPENJDK_TARGET_OS" = xsolaris \
- && test -s "$POTENTIAL_FREETYPE_LIB_PATH$OPENJDK_TARGET_CPU_ISADIR/$FREETYPE_LIB_NAME"; then
- # Found lib in isa dir, use that instead.
- POTENTIAL_FREETYPE_LIB_PATH="$POTENTIAL_FREETYPE_LIB_PATH$OPENJDK_TARGET_CPU_ISADIR"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting to use $POTENTIAL_FREETYPE_LIB_PATH instead" >&5
-$as_echo "$as_me: Rewriting to use $POTENTIAL_FREETYPE_LIB_PATH instead" >&6;}
- fi
- fi
- fi
-
- if test "x$FOUND_FREETYPE" = xyes; then
-
- # Only process if variable expands to non-empty
-
- if test "x$POTENTIAL_FREETYPE_INCLUDE_PATH" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- path="$POTENTIAL_FREETYPE_INCLUDE_PATH"
- new_path=`$CYGPATH -u "$path"`
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file precense.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Cannot locate the the path of POTENTIAL_FREETYPE_INCLUDE_PATH" "$LINENO" 5
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
-
- if test "x$path" != "x$new_path"; then
- POTENTIAL_FREETYPE_INCLUDE_PATH="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting POTENTIAL_FREETYPE_INCLUDE_PATH to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting POTENTIAL_FREETYPE_INCLUDE_PATH to \"$new_path\"" >&6;}
- fi
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- path="$POTENTIAL_FREETYPE_INCLUDE_PATH"
- has_colon=`$ECHO $path | $GREP ^.:`
- new_path="$path"
- if test "x$has_colon" = x; then
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $path`
- fi
-
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- if test "x$path" != "x$new_path"; then
- POTENTIAL_FREETYPE_INCLUDE_PATH="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting POTENTIAL_FREETYPE_INCLUDE_PATH to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting POTENTIAL_FREETYPE_INCLUDE_PATH to \"$new_path\"" >&6;}
- fi
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
-
- else
- # We're on a unix platform. Hooray! :)
- path="$POTENTIAL_FREETYPE_INCLUDE_PATH"
- has_space=`$ECHO "$path" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
- fi
-
- # Use eval to expand a potential ~
- eval path="$path"
- if test ! -f "$path" && test ! -d "$path"; then
- as_fn_error $? "The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is not found." "$LINENO" 5
- fi
-
- if test -d "$path"; then
- POTENTIAL_FREETYPE_INCLUDE_PATH="`cd "$path"; $THEPWDCMD -L`"
- else
- dir="`$DIRNAME "$path"`"
- base="`$BASENAME "$path"`"
- POTENTIAL_FREETYPE_INCLUDE_PATH="`cd "$dir"; $THEPWDCMD -L`/$base"
- fi
- fi
- fi
-
-
- # Only process if variable expands to non-empty
-
- if test "x$POTENTIAL_FREETYPE_LIB_PATH" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- path="$POTENTIAL_FREETYPE_LIB_PATH"
- new_path=`$CYGPATH -u "$path"`
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file precense.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Cannot locate the the path of POTENTIAL_FREETYPE_LIB_PATH" "$LINENO" 5
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
-
- if test "x$path" != "x$new_path"; then
- POTENTIAL_FREETYPE_LIB_PATH="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting POTENTIAL_FREETYPE_LIB_PATH to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting POTENTIAL_FREETYPE_LIB_PATH to \"$new_path\"" >&6;}
- fi
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- path="$POTENTIAL_FREETYPE_LIB_PATH"
- has_colon=`$ECHO $path | $GREP ^.:`
- new_path="$path"
- if test "x$has_colon" = x; then
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $path`
- fi
-
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- if test "x$path" != "x$new_path"; then
- POTENTIAL_FREETYPE_LIB_PATH="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting POTENTIAL_FREETYPE_LIB_PATH to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting POTENTIAL_FREETYPE_LIB_PATH to \"$new_path\"" >&6;}
- fi
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
-
- else
- # We're on a unix platform. Hooray! :)
- path="$POTENTIAL_FREETYPE_LIB_PATH"
- has_space=`$ECHO "$path" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
- fi
-
- # Use eval to expand a potential ~
- eval path="$path"
- if test ! -f "$path" && test ! -d "$path"; then
- as_fn_error $? "The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is not found." "$LINENO" 5
- fi
-
- if test -d "$path"; then
- POTENTIAL_FREETYPE_LIB_PATH="`cd "$path"; $THEPWDCMD -L`"
- else
- dir="`$DIRNAME "$path"`"
- base="`$BASENAME "$path"`"
- POTENTIAL_FREETYPE_LIB_PATH="`cd "$dir"; $THEPWDCMD -L`/$base"
- fi
- fi
- fi
-
-
- FREETYPE_INCLUDE_PATH="$POTENTIAL_FREETYPE_INCLUDE_PATH"
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for freetype includes" >&5
-$as_echo_n "checking for freetype includes... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $FREETYPE_INCLUDE_PATH" >&5
-$as_echo "$FREETYPE_INCLUDE_PATH" >&6; }
- FREETYPE_LIB_PATH="$POTENTIAL_FREETYPE_LIB_PATH"
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for freetype libraries" >&5
-$as_echo_n "checking for freetype libraries... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $FREETYPE_LIB_PATH" >&5
-$as_echo "$FREETYPE_LIB_PATH" >&6; }
- fi
-
- else
-
- POTENTIAL_FREETYPE_INCLUDE_PATH="$FREETYPE_BASE_DIR/include"
- POTENTIAL_FREETYPE_LIB_PATH="$FREETYPE_BASE_DIR/lib32"
- METHOD="well-known location"
-
- # Let's start with an optimistic view of the world :-)
- FOUND_FREETYPE=yes
-
- # First look for the canonical freetype main include file ft2build.h.
- if ! test -s "$POTENTIAL_FREETYPE_INCLUDE_PATH/ft2build.h"; then
- # Oh no! Let's try in the freetype2 directory. This is needed at least at Mac OS X Yosemite.
- POTENTIAL_FREETYPE_INCLUDE_PATH="$POTENTIAL_FREETYPE_INCLUDE_PATH/freetype2"
- if ! test -s "$POTENTIAL_FREETYPE_INCLUDE_PATH/ft2build.h"; then
- # Fail.
- FOUND_FREETYPE=no
- fi
- fi
-
- if test "x$FOUND_FREETYPE" = xyes; then
- # Include file found, let's continue the sanity check.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found freetype include files at $POTENTIAL_FREETYPE_INCLUDE_PATH using $METHOD" >&5
-$as_echo "$as_me: Found freetype include files at $POTENTIAL_FREETYPE_INCLUDE_PATH using $METHOD" >&6;}
-
- # Reset to default value
- FREETYPE_BASE_NAME=freetype
- FREETYPE_LIB_NAME="${LIBRARY_PREFIX}${FREETYPE_BASE_NAME}${SHARED_LIBRARY_SUFFIX}"
- if ! test -s "$POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME"; then
- if test "x$OPENJDK_TARGET_OS" = xmacosx \
- && test -s "$POTENTIAL_FREETYPE_LIB_PATH/${LIBRARY_PREFIX}freetype.6${SHARED_LIBRARY_SUFFIX}"; then
- # On Mac OS X Yosemite, the symlink from libfreetype.dylib to libfreetype.6.dylib disappeared. Check
- # for the .6 version explicitly.
- FREETYPE_BASE_NAME=freetype.6
- FREETYPE_LIB_NAME="${LIBRARY_PREFIX}${FREETYPE_BASE_NAME}${SHARED_LIBRARY_SUFFIX}"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Compensating for missing symlink by using version 6 explicitly" >&5
-$as_echo "$as_me: Compensating for missing symlink by using version 6 explicitly" >&6;}
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME. Ignoring location." >&5
-$as_echo "$as_me: Could not find $POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME. Ignoring location." >&6;}
- FOUND_FREETYPE=no
- fi
- else
- if test "x$OPENJDK_TARGET_OS" = xwindows; then
- # On Windows, we will need both .lib and .dll file.
- if ! test -s "$POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib. Ignoring location." >&5
-$as_echo "$as_me: Could not find $POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib. Ignoring location." >&6;}
- FOUND_FREETYPE=no
- fi
- elif test "x$OPENJDK_TARGET_OS" = xsolaris \
- && test -s "$POTENTIAL_FREETYPE_LIB_PATH$OPENJDK_TARGET_CPU_ISADIR/$FREETYPE_LIB_NAME"; then
- # Found lib in isa dir, use that instead.
- POTENTIAL_FREETYPE_LIB_PATH="$POTENTIAL_FREETYPE_LIB_PATH$OPENJDK_TARGET_CPU_ISADIR"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting to use $POTENTIAL_FREETYPE_LIB_PATH instead" >&5
-$as_echo "$as_me: Rewriting to use $POTENTIAL_FREETYPE_LIB_PATH instead" >&6;}
- fi
- fi
- fi
-
- if test "x$FOUND_FREETYPE" = xyes; then
-
- # Only process if variable expands to non-empty
-
- if test "x$POTENTIAL_FREETYPE_INCLUDE_PATH" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- path="$POTENTIAL_FREETYPE_INCLUDE_PATH"
- new_path=`$CYGPATH -u "$path"`
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file precense.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Cannot locate the the path of POTENTIAL_FREETYPE_INCLUDE_PATH" "$LINENO" 5
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
-
- if test "x$path" != "x$new_path"; then
- POTENTIAL_FREETYPE_INCLUDE_PATH="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting POTENTIAL_FREETYPE_INCLUDE_PATH to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting POTENTIAL_FREETYPE_INCLUDE_PATH to \"$new_path\"" >&6;}
- fi
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- path="$POTENTIAL_FREETYPE_INCLUDE_PATH"
- has_colon=`$ECHO $path | $GREP ^.:`
- new_path="$path"
- if test "x$has_colon" = x; then
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $path`
- fi
-
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- if test "x$path" != "x$new_path"; then
- POTENTIAL_FREETYPE_INCLUDE_PATH="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting POTENTIAL_FREETYPE_INCLUDE_PATH to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting POTENTIAL_FREETYPE_INCLUDE_PATH to \"$new_path\"" >&6;}
- fi
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
-
- else
- # We're on a unix platform. Hooray! :)
- path="$POTENTIAL_FREETYPE_INCLUDE_PATH"
- has_space=`$ECHO "$path" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
- fi
-
- # Use eval to expand a potential ~
- eval path="$path"
- if test ! -f "$path" && test ! -d "$path"; then
- as_fn_error $? "The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is not found." "$LINENO" 5
- fi
-
- if test -d "$path"; then
- POTENTIAL_FREETYPE_INCLUDE_PATH="`cd "$path"; $THEPWDCMD -L`"
- else
- dir="`$DIRNAME "$path"`"
- base="`$BASENAME "$path"`"
- POTENTIAL_FREETYPE_INCLUDE_PATH="`cd "$dir"; $THEPWDCMD -L`/$base"
- fi
- fi
- fi
-
-
- # Only process if variable expands to non-empty
-
- if test "x$POTENTIAL_FREETYPE_LIB_PATH" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- path="$POTENTIAL_FREETYPE_LIB_PATH"
- new_path=`$CYGPATH -u "$path"`
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file precense.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Cannot locate the the path of POTENTIAL_FREETYPE_LIB_PATH" "$LINENO" 5
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
-
- if test "x$path" != "x$new_path"; then
- POTENTIAL_FREETYPE_LIB_PATH="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting POTENTIAL_FREETYPE_LIB_PATH to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting POTENTIAL_FREETYPE_LIB_PATH to \"$new_path\"" >&6;}
- fi
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- path="$POTENTIAL_FREETYPE_LIB_PATH"
- has_colon=`$ECHO $path | $GREP ^.:`
- new_path="$path"
- if test "x$has_colon" = x; then
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $path`
- fi
-
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- if test "x$path" != "x$new_path"; then
- POTENTIAL_FREETYPE_LIB_PATH="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting POTENTIAL_FREETYPE_LIB_PATH to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting POTENTIAL_FREETYPE_LIB_PATH to \"$new_path\"" >&6;}
- fi
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
-
- else
- # We're on a unix platform. Hooray! :)
- path="$POTENTIAL_FREETYPE_LIB_PATH"
- has_space=`$ECHO "$path" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
- fi
-
- # Use eval to expand a potential ~
- eval path="$path"
- if test ! -f "$path" && test ! -d "$path"; then
- as_fn_error $? "The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is not found." "$LINENO" 5
- fi
-
- if test -d "$path"; then
- POTENTIAL_FREETYPE_LIB_PATH="`cd "$path"; $THEPWDCMD -L`"
- else
- dir="`$DIRNAME "$path"`"
- base="`$BASENAME "$path"`"
- POTENTIAL_FREETYPE_LIB_PATH="`cd "$dir"; $THEPWDCMD -L`/$base"
- fi
- fi
- fi
-
-
- FREETYPE_INCLUDE_PATH="$POTENTIAL_FREETYPE_INCLUDE_PATH"
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for freetype includes" >&5
-$as_echo_n "checking for freetype includes... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $FREETYPE_INCLUDE_PATH" >&5
-$as_echo "$FREETYPE_INCLUDE_PATH" >&6; }
- FREETYPE_LIB_PATH="$POTENTIAL_FREETYPE_LIB_PATH"
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for freetype libraries" >&5
-$as_echo_n "checking for freetype libraries... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $FREETYPE_LIB_PATH" >&5
-$as_echo "$FREETYPE_LIB_PATH" >&6; }
- fi
-
- fi
- fi
- fi
- else
- FREETYPE_BASE_DIR="$SYSROOT/usr"
-
- POTENTIAL_FREETYPE_INCLUDE_PATH="$FREETYPE_BASE_DIR/include"
- POTENTIAL_FREETYPE_LIB_PATH="$FREETYPE_BASE_DIR/lib"
- METHOD="well-known location"
-
- # Let's start with an optimistic view of the world :-)
- FOUND_FREETYPE=yes
-
- # First look for the canonical freetype main include file ft2build.h.
- if ! test -s "$POTENTIAL_FREETYPE_INCLUDE_PATH/ft2build.h"; then
- # Oh no! Let's try in the freetype2 directory. This is needed at least at Mac OS X Yosemite.
- POTENTIAL_FREETYPE_INCLUDE_PATH="$POTENTIAL_FREETYPE_INCLUDE_PATH/freetype2"
- if ! test -s "$POTENTIAL_FREETYPE_INCLUDE_PATH/ft2build.h"; then
- # Fail.
- FOUND_FREETYPE=no
- fi
- fi
-
- if test "x$FOUND_FREETYPE" = xyes; then
- # Include file found, let's continue the sanity check.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found freetype include files at $POTENTIAL_FREETYPE_INCLUDE_PATH using $METHOD" >&5
-$as_echo "$as_me: Found freetype include files at $POTENTIAL_FREETYPE_INCLUDE_PATH using $METHOD" >&6;}
-
- # Reset to default value
- FREETYPE_BASE_NAME=freetype
- FREETYPE_LIB_NAME="${LIBRARY_PREFIX}${FREETYPE_BASE_NAME}${SHARED_LIBRARY_SUFFIX}"
- if ! test -s "$POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME"; then
- if test "x$OPENJDK_TARGET_OS" = xmacosx \
- && test -s "$POTENTIAL_FREETYPE_LIB_PATH/${LIBRARY_PREFIX}freetype.6${SHARED_LIBRARY_SUFFIX}"; then
- # On Mac OS X Yosemite, the symlink from libfreetype.dylib to libfreetype.6.dylib disappeared. Check
- # for the .6 version explicitly.
- FREETYPE_BASE_NAME=freetype.6
- FREETYPE_LIB_NAME="${LIBRARY_PREFIX}${FREETYPE_BASE_NAME}${SHARED_LIBRARY_SUFFIX}"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Compensating for missing symlink by using version 6 explicitly" >&5
-$as_echo "$as_me: Compensating for missing symlink by using version 6 explicitly" >&6;}
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME. Ignoring location." >&5
-$as_echo "$as_me: Could not find $POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME. Ignoring location." >&6;}
- FOUND_FREETYPE=no
- fi
- else
- if test "x$OPENJDK_TARGET_OS" = xwindows; then
- # On Windows, we will need both .lib and .dll file.
- if ! test -s "$POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib. Ignoring location." >&5
-$as_echo "$as_me: Could not find $POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib. Ignoring location." >&6;}
- FOUND_FREETYPE=no
- fi
- elif test "x$OPENJDK_TARGET_OS" = xsolaris \
- && test -s "$POTENTIAL_FREETYPE_LIB_PATH$OPENJDK_TARGET_CPU_ISADIR/$FREETYPE_LIB_NAME"; then
- # Found lib in isa dir, use that instead.
- POTENTIAL_FREETYPE_LIB_PATH="$POTENTIAL_FREETYPE_LIB_PATH$OPENJDK_TARGET_CPU_ISADIR"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting to use $POTENTIAL_FREETYPE_LIB_PATH instead" >&5
-$as_echo "$as_me: Rewriting to use $POTENTIAL_FREETYPE_LIB_PATH instead" >&6;}
- fi
- fi
- fi
-
- if test "x$FOUND_FREETYPE" = xyes; then
-
- # Only process if variable expands to non-empty
-
- if test "x$POTENTIAL_FREETYPE_INCLUDE_PATH" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- path="$POTENTIAL_FREETYPE_INCLUDE_PATH"
- new_path=`$CYGPATH -u "$path"`
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file precense.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Cannot locate the the path of POTENTIAL_FREETYPE_INCLUDE_PATH" "$LINENO" 5
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
-
- if test "x$path" != "x$new_path"; then
- POTENTIAL_FREETYPE_INCLUDE_PATH="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting POTENTIAL_FREETYPE_INCLUDE_PATH to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting POTENTIAL_FREETYPE_INCLUDE_PATH to \"$new_path\"" >&6;}
- fi
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- path="$POTENTIAL_FREETYPE_INCLUDE_PATH"
- has_colon=`$ECHO $path | $GREP ^.:`
- new_path="$path"
- if test "x$has_colon" = x; then
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $path`
- fi
-
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- if test "x$path" != "x$new_path"; then
- POTENTIAL_FREETYPE_INCLUDE_PATH="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting POTENTIAL_FREETYPE_INCLUDE_PATH to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting POTENTIAL_FREETYPE_INCLUDE_PATH to \"$new_path\"" >&6;}
- fi
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
-
- else
- # We're on a unix platform. Hooray! :)
- path="$POTENTIAL_FREETYPE_INCLUDE_PATH"
- has_space=`$ECHO "$path" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
- fi
-
- # Use eval to expand a potential ~
- eval path="$path"
- if test ! -f "$path" && test ! -d "$path"; then
- as_fn_error $? "The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is not found." "$LINENO" 5
- fi
-
- if test -d "$path"; then
- POTENTIAL_FREETYPE_INCLUDE_PATH="`cd "$path"; $THEPWDCMD -L`"
- else
- dir="`$DIRNAME "$path"`"
- base="`$BASENAME "$path"`"
- POTENTIAL_FREETYPE_INCLUDE_PATH="`cd "$dir"; $THEPWDCMD -L`/$base"
- fi
- fi
- fi
-
-
- # Only process if variable expands to non-empty
-
- if test "x$POTENTIAL_FREETYPE_LIB_PATH" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- path="$POTENTIAL_FREETYPE_LIB_PATH"
- new_path=`$CYGPATH -u "$path"`
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file precense.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Cannot locate the the path of POTENTIAL_FREETYPE_LIB_PATH" "$LINENO" 5
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
-
- if test "x$path" != "x$new_path"; then
- POTENTIAL_FREETYPE_LIB_PATH="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting POTENTIAL_FREETYPE_LIB_PATH to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting POTENTIAL_FREETYPE_LIB_PATH to \"$new_path\"" >&6;}
- fi
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- path="$POTENTIAL_FREETYPE_LIB_PATH"
- has_colon=`$ECHO $path | $GREP ^.:`
- new_path="$path"
- if test "x$has_colon" = x; then
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $path`
- fi
-
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- if test "x$path" != "x$new_path"; then
- POTENTIAL_FREETYPE_LIB_PATH="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting POTENTIAL_FREETYPE_LIB_PATH to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting POTENTIAL_FREETYPE_LIB_PATH to \"$new_path\"" >&6;}
- fi
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
-
- else
- # We're on a unix platform. Hooray! :)
- path="$POTENTIAL_FREETYPE_LIB_PATH"
- has_space=`$ECHO "$path" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
- fi
-
- # Use eval to expand a potential ~
- eval path="$path"
- if test ! -f "$path" && test ! -d "$path"; then
- as_fn_error $? "The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is not found." "$LINENO" 5
- fi
-
- if test -d "$path"; then
- POTENTIAL_FREETYPE_LIB_PATH="`cd "$path"; $THEPWDCMD -L`"
- else
- dir="`$DIRNAME "$path"`"
- base="`$BASENAME "$path"`"
- POTENTIAL_FREETYPE_LIB_PATH="`cd "$dir"; $THEPWDCMD -L`/$base"
- fi
- fi
- fi
-
-
- FREETYPE_INCLUDE_PATH="$POTENTIAL_FREETYPE_INCLUDE_PATH"
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for freetype includes" >&5
-$as_echo_n "checking for freetype includes... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $FREETYPE_INCLUDE_PATH" >&5
-$as_echo "$FREETYPE_INCLUDE_PATH" >&6; }
- FREETYPE_LIB_PATH="$POTENTIAL_FREETYPE_LIB_PATH"
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for freetype libraries" >&5
-$as_echo_n "checking for freetype libraries... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $FREETYPE_LIB_PATH" >&5
-$as_echo "$FREETYPE_LIB_PATH" >&6; }
- fi
-
-
- if test "x$FOUND_FREETYPE" != xyes; then
- FREETYPE_BASE_DIR="$SYSROOT/usr/X11"
-
- POTENTIAL_FREETYPE_INCLUDE_PATH="$FREETYPE_BASE_DIR/include"
- POTENTIAL_FREETYPE_LIB_PATH="$FREETYPE_BASE_DIR/lib"
- METHOD="well-known location"
-
- # Let's start with an optimistic view of the world :-)
- FOUND_FREETYPE=yes
-
- # First look for the canonical freetype main include file ft2build.h.
- if ! test -s "$POTENTIAL_FREETYPE_INCLUDE_PATH/ft2build.h"; then
- # Oh no! Let's try in the freetype2 directory. This is needed at least at Mac OS X Yosemite.
- POTENTIAL_FREETYPE_INCLUDE_PATH="$POTENTIAL_FREETYPE_INCLUDE_PATH/freetype2"
- if ! test -s "$POTENTIAL_FREETYPE_INCLUDE_PATH/ft2build.h"; then
- # Fail.
- FOUND_FREETYPE=no
- fi
- fi
-
- if test "x$FOUND_FREETYPE" = xyes; then
- # Include file found, let's continue the sanity check.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found freetype include files at $POTENTIAL_FREETYPE_INCLUDE_PATH using $METHOD" >&5
-$as_echo "$as_me: Found freetype include files at $POTENTIAL_FREETYPE_INCLUDE_PATH using $METHOD" >&6;}
-
- # Reset to default value
- FREETYPE_BASE_NAME=freetype
- FREETYPE_LIB_NAME="${LIBRARY_PREFIX}${FREETYPE_BASE_NAME}${SHARED_LIBRARY_SUFFIX}"
- if ! test -s "$POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME"; then
- if test "x$OPENJDK_TARGET_OS" = xmacosx \
- && test -s "$POTENTIAL_FREETYPE_LIB_PATH/${LIBRARY_PREFIX}freetype.6${SHARED_LIBRARY_SUFFIX}"; then
- # On Mac OS X Yosemite, the symlink from libfreetype.dylib to libfreetype.6.dylib disappeared. Check
- # for the .6 version explicitly.
- FREETYPE_BASE_NAME=freetype.6
- FREETYPE_LIB_NAME="${LIBRARY_PREFIX}${FREETYPE_BASE_NAME}${SHARED_LIBRARY_SUFFIX}"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Compensating for missing symlink by using version 6 explicitly" >&5
-$as_echo "$as_me: Compensating for missing symlink by using version 6 explicitly" >&6;}
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME. Ignoring location." >&5
-$as_echo "$as_me: Could not find $POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME. Ignoring location." >&6;}
- FOUND_FREETYPE=no
- fi
- else
- if test "x$OPENJDK_TARGET_OS" = xwindows; then
- # On Windows, we will need both .lib and .dll file.
- if ! test -s "$POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib. Ignoring location." >&5
-$as_echo "$as_me: Could not find $POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib. Ignoring location." >&6;}
- FOUND_FREETYPE=no
- fi
- elif test "x$OPENJDK_TARGET_OS" = xsolaris \
- && test -s "$POTENTIAL_FREETYPE_LIB_PATH$OPENJDK_TARGET_CPU_ISADIR/$FREETYPE_LIB_NAME"; then
- # Found lib in isa dir, use that instead.
- POTENTIAL_FREETYPE_LIB_PATH="$POTENTIAL_FREETYPE_LIB_PATH$OPENJDK_TARGET_CPU_ISADIR"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting to use $POTENTIAL_FREETYPE_LIB_PATH instead" >&5
-$as_echo "$as_me: Rewriting to use $POTENTIAL_FREETYPE_LIB_PATH instead" >&6;}
- fi
- fi
- fi
-
- if test "x$FOUND_FREETYPE" = xyes; then
-
- # Only process if variable expands to non-empty
-
- if test "x$POTENTIAL_FREETYPE_INCLUDE_PATH" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- path="$POTENTIAL_FREETYPE_INCLUDE_PATH"
- new_path=`$CYGPATH -u "$path"`
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file precense.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Cannot locate the the path of POTENTIAL_FREETYPE_INCLUDE_PATH" "$LINENO" 5
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
-
- if test "x$path" != "x$new_path"; then
- POTENTIAL_FREETYPE_INCLUDE_PATH="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting POTENTIAL_FREETYPE_INCLUDE_PATH to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting POTENTIAL_FREETYPE_INCLUDE_PATH to \"$new_path\"" >&6;}
- fi
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- path="$POTENTIAL_FREETYPE_INCLUDE_PATH"
- has_colon=`$ECHO $path | $GREP ^.:`
- new_path="$path"
- if test "x$has_colon" = x; then
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $path`
- fi
-
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- if test "x$path" != "x$new_path"; then
- POTENTIAL_FREETYPE_INCLUDE_PATH="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting POTENTIAL_FREETYPE_INCLUDE_PATH to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting POTENTIAL_FREETYPE_INCLUDE_PATH to \"$new_path\"" >&6;}
- fi
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
-
- else
- # We're on a unix platform. Hooray! :)
- path="$POTENTIAL_FREETYPE_INCLUDE_PATH"
- has_space=`$ECHO "$path" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
- fi
-
- # Use eval to expand a potential ~
- eval path="$path"
- if test ! -f "$path" && test ! -d "$path"; then
- as_fn_error $? "The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is not found." "$LINENO" 5
- fi
-
- if test -d "$path"; then
- POTENTIAL_FREETYPE_INCLUDE_PATH="`cd "$path"; $THEPWDCMD -L`"
- else
- dir="`$DIRNAME "$path"`"
- base="`$BASENAME "$path"`"
- POTENTIAL_FREETYPE_INCLUDE_PATH="`cd "$dir"; $THEPWDCMD -L`/$base"
- fi
- fi
- fi
-
-
- # Only process if variable expands to non-empty
-
- if test "x$POTENTIAL_FREETYPE_LIB_PATH" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- path="$POTENTIAL_FREETYPE_LIB_PATH"
- new_path=`$CYGPATH -u "$path"`
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file precense.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Cannot locate the the path of POTENTIAL_FREETYPE_LIB_PATH" "$LINENO" 5
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
-
- if test "x$path" != "x$new_path"; then
- POTENTIAL_FREETYPE_LIB_PATH="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting POTENTIAL_FREETYPE_LIB_PATH to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting POTENTIAL_FREETYPE_LIB_PATH to \"$new_path\"" >&6;}
- fi
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- path="$POTENTIAL_FREETYPE_LIB_PATH"
- has_colon=`$ECHO $path | $GREP ^.:`
- new_path="$path"
- if test "x$has_colon" = x; then
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $path`
- fi
-
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- if test "x$path" != "x$new_path"; then
- POTENTIAL_FREETYPE_LIB_PATH="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting POTENTIAL_FREETYPE_LIB_PATH to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting POTENTIAL_FREETYPE_LIB_PATH to \"$new_path\"" >&6;}
- fi
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
-
- else
- # We're on a unix platform. Hooray! :)
- path="$POTENTIAL_FREETYPE_LIB_PATH"
- has_space=`$ECHO "$path" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
- fi
-
- # Use eval to expand a potential ~
- eval path="$path"
- if test ! -f "$path" && test ! -d "$path"; then
- as_fn_error $? "The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is not found." "$LINENO" 5
- fi
-
- if test -d "$path"; then
- POTENTIAL_FREETYPE_LIB_PATH="`cd "$path"; $THEPWDCMD -L`"
- else
- dir="`$DIRNAME "$path"`"
- base="`$BASENAME "$path"`"
- POTENTIAL_FREETYPE_LIB_PATH="`cd "$dir"; $THEPWDCMD -L`/$base"
- fi
- fi
- fi
-
-
- FREETYPE_INCLUDE_PATH="$POTENTIAL_FREETYPE_INCLUDE_PATH"
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for freetype includes" >&5
-$as_echo_n "checking for freetype includes... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $FREETYPE_INCLUDE_PATH" >&5
-$as_echo "$FREETYPE_INCLUDE_PATH" >&6; }
- FREETYPE_LIB_PATH="$POTENTIAL_FREETYPE_LIB_PATH"
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for freetype libraries" >&5
-$as_echo_n "checking for freetype libraries... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $FREETYPE_LIB_PATH" >&5
-$as_echo "$FREETYPE_LIB_PATH" >&6; }
- fi
-
- fi
- if test "x$FOUND_FREETYPE" != xyes; then
- FREETYPE_BASE_DIR="$SYSROOT/usr/local"
-
- POTENTIAL_FREETYPE_INCLUDE_PATH="$FREETYPE_BASE_DIR/include"
- POTENTIAL_FREETYPE_LIB_PATH="$FREETYPE_BASE_DIR/lib"
- METHOD="well-known location"
-
- # Let's start with an optimistic view of the world :-)
- FOUND_FREETYPE=yes
-
- # First look for the canonical freetype main include file ft2build.h.
- if ! test -s "$POTENTIAL_FREETYPE_INCLUDE_PATH/ft2build.h"; then
- # Oh no! Let's try in the freetype2 directory. This is needed at least at Mac OS X Yosemite.
- POTENTIAL_FREETYPE_INCLUDE_PATH="$POTENTIAL_FREETYPE_INCLUDE_PATH/freetype2"
- if ! test -s "$POTENTIAL_FREETYPE_INCLUDE_PATH/ft2build.h"; then
- # Fail.
- FOUND_FREETYPE=no
- fi
- fi
-
- if test "x$FOUND_FREETYPE" = xyes; then
- # Include file found, let's continue the sanity check.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found freetype include files at $POTENTIAL_FREETYPE_INCLUDE_PATH using $METHOD" >&5
-$as_echo "$as_me: Found freetype include files at $POTENTIAL_FREETYPE_INCLUDE_PATH using $METHOD" >&6;}
-
- # Reset to default value
- FREETYPE_BASE_NAME=freetype
- FREETYPE_LIB_NAME="${LIBRARY_PREFIX}${FREETYPE_BASE_NAME}${SHARED_LIBRARY_SUFFIX}"
- if ! test -s "$POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME"; then
- if test "x$OPENJDK_TARGET_OS" = xmacosx \
- && test -s "$POTENTIAL_FREETYPE_LIB_PATH/${LIBRARY_PREFIX}freetype.6${SHARED_LIBRARY_SUFFIX}"; then
- # On Mac OS X Yosemite, the symlink from libfreetype.dylib to libfreetype.6.dylib disappeared. Check
- # for the .6 version explicitly.
- FREETYPE_BASE_NAME=freetype.6
- FREETYPE_LIB_NAME="${LIBRARY_PREFIX}${FREETYPE_BASE_NAME}${SHARED_LIBRARY_SUFFIX}"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Compensating for missing symlink by using version 6 explicitly" >&5
-$as_echo "$as_me: Compensating for missing symlink by using version 6 explicitly" >&6;}
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME. Ignoring location." >&5
-$as_echo "$as_me: Could not find $POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME. Ignoring location." >&6;}
- FOUND_FREETYPE=no
- fi
- else
- if test "x$OPENJDK_TARGET_OS" = xwindows; then
- # On Windows, we will need both .lib and .dll file.
- if ! test -s "$POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib. Ignoring location." >&5
-$as_echo "$as_me: Could not find $POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib. Ignoring location." >&6;}
- FOUND_FREETYPE=no
- fi
- elif test "x$OPENJDK_TARGET_OS" = xsolaris \
- && test -s "$POTENTIAL_FREETYPE_LIB_PATH$OPENJDK_TARGET_CPU_ISADIR/$FREETYPE_LIB_NAME"; then
- # Found lib in isa dir, use that instead.
- POTENTIAL_FREETYPE_LIB_PATH="$POTENTIAL_FREETYPE_LIB_PATH$OPENJDK_TARGET_CPU_ISADIR"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting to use $POTENTIAL_FREETYPE_LIB_PATH instead" >&5
-$as_echo "$as_me: Rewriting to use $POTENTIAL_FREETYPE_LIB_PATH instead" >&6;}
- fi
- fi
- fi
-
- if test "x$FOUND_FREETYPE" = xyes; then
-
- # Only process if variable expands to non-empty
-
- if test "x$POTENTIAL_FREETYPE_INCLUDE_PATH" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- path="$POTENTIAL_FREETYPE_INCLUDE_PATH"
- new_path=`$CYGPATH -u "$path"`
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file precense.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Cannot locate the the path of POTENTIAL_FREETYPE_INCLUDE_PATH" "$LINENO" 5
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
-
- if test "x$path" != "x$new_path"; then
- POTENTIAL_FREETYPE_INCLUDE_PATH="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting POTENTIAL_FREETYPE_INCLUDE_PATH to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting POTENTIAL_FREETYPE_INCLUDE_PATH to \"$new_path\"" >&6;}
- fi
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- path="$POTENTIAL_FREETYPE_INCLUDE_PATH"
- has_colon=`$ECHO $path | $GREP ^.:`
- new_path="$path"
- if test "x$has_colon" = x; then
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $path`
- fi
-
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- if test "x$path" != "x$new_path"; then
- POTENTIAL_FREETYPE_INCLUDE_PATH="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting POTENTIAL_FREETYPE_INCLUDE_PATH to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting POTENTIAL_FREETYPE_INCLUDE_PATH to \"$new_path\"" >&6;}
- fi
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
-
- else
- # We're on a unix platform. Hooray! :)
- path="$POTENTIAL_FREETYPE_INCLUDE_PATH"
- has_space=`$ECHO "$path" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
- fi
-
- # Use eval to expand a potential ~
- eval path="$path"
- if test ! -f "$path" && test ! -d "$path"; then
- as_fn_error $? "The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is not found." "$LINENO" 5
- fi
-
- if test -d "$path"; then
- POTENTIAL_FREETYPE_INCLUDE_PATH="`cd "$path"; $THEPWDCMD -L`"
- else
- dir="`$DIRNAME "$path"`"
- base="`$BASENAME "$path"`"
- POTENTIAL_FREETYPE_INCLUDE_PATH="`cd "$dir"; $THEPWDCMD -L`/$base"
- fi
- fi
- fi
-
-
- # Only process if variable expands to non-empty
-
- if test "x$POTENTIAL_FREETYPE_LIB_PATH" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- path="$POTENTIAL_FREETYPE_LIB_PATH"
- new_path=`$CYGPATH -u "$path"`
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file precense.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Cannot locate the the path of POTENTIAL_FREETYPE_LIB_PATH" "$LINENO" 5
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
-
- if test "x$path" != "x$new_path"; then
- POTENTIAL_FREETYPE_LIB_PATH="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting POTENTIAL_FREETYPE_LIB_PATH to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting POTENTIAL_FREETYPE_LIB_PATH to \"$new_path\"" >&6;}
- fi
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- path="$POTENTIAL_FREETYPE_LIB_PATH"
- has_colon=`$ECHO $path | $GREP ^.:`
- new_path="$path"
- if test "x$has_colon" = x; then
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $path`
- fi
-
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- if test "x$path" != "x$new_path"; then
- POTENTIAL_FREETYPE_LIB_PATH="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting POTENTIAL_FREETYPE_LIB_PATH to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting POTENTIAL_FREETYPE_LIB_PATH to \"$new_path\"" >&6;}
- fi
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
-
- else
- # We're on a unix platform. Hooray! :)
- path="$POTENTIAL_FREETYPE_LIB_PATH"
- has_space=`$ECHO "$path" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
- fi
-
- # Use eval to expand a potential ~
- eval path="$path"
- if test ! -f "$path" && test ! -d "$path"; then
- as_fn_error $? "The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is not found." "$LINENO" 5
- fi
-
- if test -d "$path"; then
- POTENTIAL_FREETYPE_LIB_PATH="`cd "$path"; $THEPWDCMD -L`"
- else
- dir="`$DIRNAME "$path"`"
- base="`$BASENAME "$path"`"
- POTENTIAL_FREETYPE_LIB_PATH="`cd "$dir"; $THEPWDCMD -L`/$base"
- fi
- fi
- fi
-
-
- FREETYPE_INCLUDE_PATH="$POTENTIAL_FREETYPE_INCLUDE_PATH"
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for freetype includes" >&5
-$as_echo_n "checking for freetype includes... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $FREETYPE_INCLUDE_PATH" >&5
-$as_echo "$FREETYPE_INCLUDE_PATH" >&6; }
- FREETYPE_LIB_PATH="$POTENTIAL_FREETYPE_LIB_PATH"
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for freetype libraries" >&5
-$as_echo_n "checking for freetype libraries... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $FREETYPE_LIB_PATH" >&5
-$as_echo "$FREETYPE_LIB_PATH" >&6; }
- fi
-
- fi
-
- if test "x$OPENJDK_TARGET_OS" = xmacosx; then
- if test "x$FOUND_FREETYPE" != xyes; then
- # Due to changes in OSX 10.11 XQuartz now installs to /opt/X11
- FREETYPE_BASE_DIR="$SYSROOT/opt/X11"
-
- POTENTIAL_FREETYPE_INCLUDE_PATH="$FREETYPE_BASE_DIR/include"
- POTENTIAL_FREETYPE_LIB_PATH="$FREETYPE_BASE_DIR/lib"
- METHOD="well-known location"
-
- # Let's start with an optimistic view of the world :-)
- FOUND_FREETYPE=yes
-
- # First look for the canonical freetype main include file ft2build.h.
- if ! test -s "$POTENTIAL_FREETYPE_INCLUDE_PATH/ft2build.h"; then
- # Oh no! Let's try in the freetype2 directory. This is needed at least at Mac OS X Yosemite.
- POTENTIAL_FREETYPE_INCLUDE_PATH="$POTENTIAL_FREETYPE_INCLUDE_PATH/freetype2"
- if ! test -s "$POTENTIAL_FREETYPE_INCLUDE_PATH/ft2build.h"; then
- # Fail.
- FOUND_FREETYPE=no
- fi
- fi
-
- if test "x$FOUND_FREETYPE" = xyes; then
- # Include file found, let's continue the sanity check.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found freetype include files at $POTENTIAL_FREETYPE_INCLUDE_PATH using $METHOD" >&5
-$as_echo "$as_me: Found freetype include files at $POTENTIAL_FREETYPE_INCLUDE_PATH using $METHOD" >&6;}
-
- # Reset to default value
- FREETYPE_BASE_NAME=freetype
- FREETYPE_LIB_NAME="${LIBRARY_PREFIX}${FREETYPE_BASE_NAME}${SHARED_LIBRARY_SUFFIX}"
- if ! test -s "$POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME"; then
- if test "x$OPENJDK_TARGET_OS" = xmacosx \
- && test -s "$POTENTIAL_FREETYPE_LIB_PATH/${LIBRARY_PREFIX}freetype.6${SHARED_LIBRARY_SUFFIX}"; then
- # On Mac OS X Yosemite, the symlink from libfreetype.dylib to libfreetype.6.dylib disappeared. Check
- # for the .6 version explicitly.
- FREETYPE_BASE_NAME=freetype.6
- FREETYPE_LIB_NAME="${LIBRARY_PREFIX}${FREETYPE_BASE_NAME}${SHARED_LIBRARY_SUFFIX}"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Compensating for missing symlink by using version 6 explicitly" >&5
-$as_echo "$as_me: Compensating for missing symlink by using version 6 explicitly" >&6;}
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME. Ignoring location." >&5
-$as_echo "$as_me: Could not find $POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME. Ignoring location." >&6;}
- FOUND_FREETYPE=no
- fi
- else
- if test "x$OPENJDK_TARGET_OS" = xwindows; then
- # On Windows, we will need both .lib and .dll file.
- if ! test -s "$POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib. Ignoring location." >&5
-$as_echo "$as_me: Could not find $POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib. Ignoring location." >&6;}
- FOUND_FREETYPE=no
- fi
- elif test "x$OPENJDK_TARGET_OS" = xsolaris \
- && test -s "$POTENTIAL_FREETYPE_LIB_PATH$OPENJDK_TARGET_CPU_ISADIR/$FREETYPE_LIB_NAME"; then
- # Found lib in isa dir, use that instead.
- POTENTIAL_FREETYPE_LIB_PATH="$POTENTIAL_FREETYPE_LIB_PATH$OPENJDK_TARGET_CPU_ISADIR"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting to use $POTENTIAL_FREETYPE_LIB_PATH instead" >&5
-$as_echo "$as_me: Rewriting to use $POTENTIAL_FREETYPE_LIB_PATH instead" >&6;}
- fi
- fi
- fi
-
- if test "x$FOUND_FREETYPE" = xyes; then
-
- # Only process if variable expands to non-empty
-
- if test "x$POTENTIAL_FREETYPE_INCLUDE_PATH" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- path="$POTENTIAL_FREETYPE_INCLUDE_PATH"
- new_path=`$CYGPATH -u "$path"`
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file precense.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Cannot locate the the path of POTENTIAL_FREETYPE_INCLUDE_PATH" "$LINENO" 5
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
-
- if test "x$path" != "x$new_path"; then
- POTENTIAL_FREETYPE_INCLUDE_PATH="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting POTENTIAL_FREETYPE_INCLUDE_PATH to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting POTENTIAL_FREETYPE_INCLUDE_PATH to \"$new_path\"" >&6;}
- fi
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- path="$POTENTIAL_FREETYPE_INCLUDE_PATH"
- has_colon=`$ECHO $path | $GREP ^.:`
- new_path="$path"
- if test "x$has_colon" = x; then
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $path`
- fi
-
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- if test "x$path" != "x$new_path"; then
- POTENTIAL_FREETYPE_INCLUDE_PATH="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting POTENTIAL_FREETYPE_INCLUDE_PATH to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting POTENTIAL_FREETYPE_INCLUDE_PATH to \"$new_path\"" >&6;}
- fi
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
-
- else
- # We're on a unix platform. Hooray! :)
- path="$POTENTIAL_FREETYPE_INCLUDE_PATH"
- has_space=`$ECHO "$path" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
- fi
-
- # Use eval to expand a potential ~
- eval path="$path"
- if test ! -f "$path" && test ! -d "$path"; then
- as_fn_error $? "The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is not found." "$LINENO" 5
- fi
-
- if test -d "$path"; then
- POTENTIAL_FREETYPE_INCLUDE_PATH="`cd "$path"; $THEPWDCMD -L`"
- else
- dir="`$DIRNAME "$path"`"
- base="`$BASENAME "$path"`"
- POTENTIAL_FREETYPE_INCLUDE_PATH="`cd "$dir"; $THEPWDCMD -L`/$base"
- fi
- fi
- fi
-
-
- # Only process if variable expands to non-empty
-
- if test "x$POTENTIAL_FREETYPE_LIB_PATH" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- path="$POTENTIAL_FREETYPE_LIB_PATH"
- new_path=`$CYGPATH -u "$path"`
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file precense.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Cannot locate the the path of POTENTIAL_FREETYPE_LIB_PATH" "$LINENO" 5
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
-
- if test "x$path" != "x$new_path"; then
- POTENTIAL_FREETYPE_LIB_PATH="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting POTENTIAL_FREETYPE_LIB_PATH to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting POTENTIAL_FREETYPE_LIB_PATH to \"$new_path\"" >&6;}
- fi
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- path="$POTENTIAL_FREETYPE_LIB_PATH"
- has_colon=`$ECHO $path | $GREP ^.:`
- new_path="$path"
- if test "x$has_colon" = x; then
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $path`
- fi
-
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- if test "x$path" != "x$new_path"; then
- POTENTIAL_FREETYPE_LIB_PATH="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting POTENTIAL_FREETYPE_LIB_PATH to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting POTENTIAL_FREETYPE_LIB_PATH to \"$new_path\"" >&6;}
- fi
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
-
- else
- # We're on a unix platform. Hooray! :)
- path="$POTENTIAL_FREETYPE_LIB_PATH"
- has_space=`$ECHO "$path" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
- fi
-
- # Use eval to expand a potential ~
- eval path="$path"
- if test ! -f "$path" && test ! -d "$path"; then
- as_fn_error $? "The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is not found." "$LINENO" 5
- fi
-
- if test -d "$path"; then
- POTENTIAL_FREETYPE_LIB_PATH="`cd "$path"; $THEPWDCMD -L`"
- else
- dir="`$DIRNAME "$path"`"
- base="`$BASENAME "$path"`"
- POTENTIAL_FREETYPE_LIB_PATH="`cd "$dir"; $THEPWDCMD -L`/$base"
- fi
- fi
- fi
-
-
- FREETYPE_INCLUDE_PATH="$POTENTIAL_FREETYPE_INCLUDE_PATH"
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for freetype includes" >&5
-$as_echo_n "checking for freetype includes... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $FREETYPE_INCLUDE_PATH" >&5
-$as_echo "$FREETYPE_INCLUDE_PATH" >&6; }
- FREETYPE_LIB_PATH="$POTENTIAL_FREETYPE_LIB_PATH"
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for freetype libraries" >&5
-$as_echo_n "checking for freetype libraries... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $FREETYPE_LIB_PATH" >&5
-$as_echo "$FREETYPE_LIB_PATH" >&6; }
- fi
-
- fi
- fi
-
- if test "x$FOUND_FREETYPE" != xyes; then
- FREETYPE_BASE_DIR="$SYSROOT/usr"
- if test "x$OPENJDK_TARGET_CPU_BITS" = x64; then
-
- POTENTIAL_FREETYPE_INCLUDE_PATH="$FREETYPE_BASE_DIR/include"
- POTENTIAL_FREETYPE_LIB_PATH="$FREETYPE_BASE_DIR/lib/$OPENJDK_TARGET_CPU-linux-gnu"
- METHOD="well-known location"
-
- # Let's start with an optimistic view of the world :-)
- FOUND_FREETYPE=yes
-
- # First look for the canonical freetype main include file ft2build.h.
- if ! test -s "$POTENTIAL_FREETYPE_INCLUDE_PATH/ft2build.h"; then
- # Oh no! Let's try in the freetype2 directory. This is needed at least at Mac OS X Yosemite.
- POTENTIAL_FREETYPE_INCLUDE_PATH="$POTENTIAL_FREETYPE_INCLUDE_PATH/freetype2"
- if ! test -s "$POTENTIAL_FREETYPE_INCLUDE_PATH/ft2build.h"; then
- # Fail.
- FOUND_FREETYPE=no
- fi
- fi
-
- if test "x$FOUND_FREETYPE" = xyes; then
- # Include file found, let's continue the sanity check.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found freetype include files at $POTENTIAL_FREETYPE_INCLUDE_PATH using $METHOD" >&5
-$as_echo "$as_me: Found freetype include files at $POTENTIAL_FREETYPE_INCLUDE_PATH using $METHOD" >&6;}
-
- # Reset to default value
- FREETYPE_BASE_NAME=freetype
- FREETYPE_LIB_NAME="${LIBRARY_PREFIX}${FREETYPE_BASE_NAME}${SHARED_LIBRARY_SUFFIX}"
- if ! test -s "$POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME"; then
- if test "x$OPENJDK_TARGET_OS" = xmacosx \
- && test -s "$POTENTIAL_FREETYPE_LIB_PATH/${LIBRARY_PREFIX}freetype.6${SHARED_LIBRARY_SUFFIX}"; then
- # On Mac OS X Yosemite, the symlink from libfreetype.dylib to libfreetype.6.dylib disappeared. Check
- # for the .6 version explicitly.
- FREETYPE_BASE_NAME=freetype.6
- FREETYPE_LIB_NAME="${LIBRARY_PREFIX}${FREETYPE_BASE_NAME}${SHARED_LIBRARY_SUFFIX}"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Compensating for missing symlink by using version 6 explicitly" >&5
-$as_echo "$as_me: Compensating for missing symlink by using version 6 explicitly" >&6;}
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME. Ignoring location." >&5
-$as_echo "$as_me: Could not find $POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME. Ignoring location." >&6;}
- FOUND_FREETYPE=no
- fi
- else
- if test "x$OPENJDK_TARGET_OS" = xwindows; then
- # On Windows, we will need both .lib and .dll file.
- if ! test -s "$POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib. Ignoring location." >&5
-$as_echo "$as_me: Could not find $POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib. Ignoring location." >&6;}
- FOUND_FREETYPE=no
- fi
- elif test "x$OPENJDK_TARGET_OS" = xsolaris \
- && test -s "$POTENTIAL_FREETYPE_LIB_PATH$OPENJDK_TARGET_CPU_ISADIR/$FREETYPE_LIB_NAME"; then
- # Found lib in isa dir, use that instead.
- POTENTIAL_FREETYPE_LIB_PATH="$POTENTIAL_FREETYPE_LIB_PATH$OPENJDK_TARGET_CPU_ISADIR"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting to use $POTENTIAL_FREETYPE_LIB_PATH instead" >&5
-$as_echo "$as_me: Rewriting to use $POTENTIAL_FREETYPE_LIB_PATH instead" >&6;}
- fi
- fi
- fi
-
- if test "x$FOUND_FREETYPE" = xyes; then
-
- # Only process if variable expands to non-empty
-
- if test "x$POTENTIAL_FREETYPE_INCLUDE_PATH" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- path="$POTENTIAL_FREETYPE_INCLUDE_PATH"
- new_path=`$CYGPATH -u "$path"`
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file precense.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Cannot locate the the path of POTENTIAL_FREETYPE_INCLUDE_PATH" "$LINENO" 5
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
-
- if test "x$path" != "x$new_path"; then
- POTENTIAL_FREETYPE_INCLUDE_PATH="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting POTENTIAL_FREETYPE_INCLUDE_PATH to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting POTENTIAL_FREETYPE_INCLUDE_PATH to \"$new_path\"" >&6;}
- fi
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- path="$POTENTIAL_FREETYPE_INCLUDE_PATH"
- has_colon=`$ECHO $path | $GREP ^.:`
- new_path="$path"
- if test "x$has_colon" = x; then
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $path`
- fi
-
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- if test "x$path" != "x$new_path"; then
- POTENTIAL_FREETYPE_INCLUDE_PATH="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting POTENTIAL_FREETYPE_INCLUDE_PATH to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting POTENTIAL_FREETYPE_INCLUDE_PATH to \"$new_path\"" >&6;}
- fi
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
-
- else
- # We're on a unix platform. Hooray! :)
- path="$POTENTIAL_FREETYPE_INCLUDE_PATH"
- has_space=`$ECHO "$path" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
- fi
-
- # Use eval to expand a potential ~
- eval path="$path"
- if test ! -f "$path" && test ! -d "$path"; then
- as_fn_error $? "The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is not found." "$LINENO" 5
- fi
-
- if test -d "$path"; then
- POTENTIAL_FREETYPE_INCLUDE_PATH="`cd "$path"; $THEPWDCMD -L`"
- else
- dir="`$DIRNAME "$path"`"
- base="`$BASENAME "$path"`"
- POTENTIAL_FREETYPE_INCLUDE_PATH="`cd "$dir"; $THEPWDCMD -L`/$base"
- fi
- fi
- fi
-
-
- # Only process if variable expands to non-empty
-
- if test "x$POTENTIAL_FREETYPE_LIB_PATH" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- path="$POTENTIAL_FREETYPE_LIB_PATH"
- new_path=`$CYGPATH -u "$path"`
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file precense.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Cannot locate the the path of POTENTIAL_FREETYPE_LIB_PATH" "$LINENO" 5
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
-
- if test "x$path" != "x$new_path"; then
- POTENTIAL_FREETYPE_LIB_PATH="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting POTENTIAL_FREETYPE_LIB_PATH to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting POTENTIAL_FREETYPE_LIB_PATH to \"$new_path\"" >&6;}
- fi
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- path="$POTENTIAL_FREETYPE_LIB_PATH"
- has_colon=`$ECHO $path | $GREP ^.:`
- new_path="$path"
- if test "x$has_colon" = x; then
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $path`
- fi
-
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- if test "x$path" != "x$new_path"; then
- POTENTIAL_FREETYPE_LIB_PATH="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting POTENTIAL_FREETYPE_LIB_PATH to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting POTENTIAL_FREETYPE_LIB_PATH to \"$new_path\"" >&6;}
- fi
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
-
- else
- # We're on a unix platform. Hooray! :)
- path="$POTENTIAL_FREETYPE_LIB_PATH"
- has_space=`$ECHO "$path" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
- fi
-
- # Use eval to expand a potential ~
- eval path="$path"
- if test ! -f "$path" && test ! -d "$path"; then
- as_fn_error $? "The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is not found." "$LINENO" 5
- fi
-
- if test -d "$path"; then
- POTENTIAL_FREETYPE_LIB_PATH="`cd "$path"; $THEPWDCMD -L`"
- else
- dir="`$DIRNAME "$path"`"
- base="`$BASENAME "$path"`"
- POTENTIAL_FREETYPE_LIB_PATH="`cd "$dir"; $THEPWDCMD -L`/$base"
- fi
- fi
- fi
-
-
- FREETYPE_INCLUDE_PATH="$POTENTIAL_FREETYPE_INCLUDE_PATH"
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for freetype includes" >&5
-$as_echo_n "checking for freetype includes... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $FREETYPE_INCLUDE_PATH" >&5
-$as_echo "$FREETYPE_INCLUDE_PATH" >&6; }
- FREETYPE_LIB_PATH="$POTENTIAL_FREETYPE_LIB_PATH"
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for freetype libraries" >&5
-$as_echo_n "checking for freetype libraries... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $FREETYPE_LIB_PATH" >&5
-$as_echo "$FREETYPE_LIB_PATH" >&6; }
- fi
-
- else
-
- POTENTIAL_FREETYPE_INCLUDE_PATH="$FREETYPE_BASE_DIR/include"
- POTENTIAL_FREETYPE_LIB_PATH="$FREETYPE_BASE_DIR/lib/i386-linux-gnu"
- METHOD="well-known location"
-
- # Let's start with an optimistic view of the world :-)
- FOUND_FREETYPE=yes
-
- # First look for the canonical freetype main include file ft2build.h.
- if ! test -s "$POTENTIAL_FREETYPE_INCLUDE_PATH/ft2build.h"; then
- # Oh no! Let's try in the freetype2 directory. This is needed at least at Mac OS X Yosemite.
- POTENTIAL_FREETYPE_INCLUDE_PATH="$POTENTIAL_FREETYPE_INCLUDE_PATH/freetype2"
- if ! test -s "$POTENTIAL_FREETYPE_INCLUDE_PATH/ft2build.h"; then
- # Fail.
- FOUND_FREETYPE=no
- fi
- fi
-
- if test "x$FOUND_FREETYPE" = xyes; then
- # Include file found, let's continue the sanity check.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found freetype include files at $POTENTIAL_FREETYPE_INCLUDE_PATH using $METHOD" >&5
-$as_echo "$as_me: Found freetype include files at $POTENTIAL_FREETYPE_INCLUDE_PATH using $METHOD" >&6;}
-
- # Reset to default value
- FREETYPE_BASE_NAME=freetype
- FREETYPE_LIB_NAME="${LIBRARY_PREFIX}${FREETYPE_BASE_NAME}${SHARED_LIBRARY_SUFFIX}"
- if ! test -s "$POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME"; then
- if test "x$OPENJDK_TARGET_OS" = xmacosx \
- && test -s "$POTENTIAL_FREETYPE_LIB_PATH/${LIBRARY_PREFIX}freetype.6${SHARED_LIBRARY_SUFFIX}"; then
- # On Mac OS X Yosemite, the symlink from libfreetype.dylib to libfreetype.6.dylib disappeared. Check
- # for the .6 version explicitly.
- FREETYPE_BASE_NAME=freetype.6
- FREETYPE_LIB_NAME="${LIBRARY_PREFIX}${FREETYPE_BASE_NAME}${SHARED_LIBRARY_SUFFIX}"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Compensating for missing symlink by using version 6 explicitly" >&5
-$as_echo "$as_me: Compensating for missing symlink by using version 6 explicitly" >&6;}
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME. Ignoring location." >&5
-$as_echo "$as_me: Could not find $POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME. Ignoring location." >&6;}
- FOUND_FREETYPE=no
- fi
- else
- if test "x$OPENJDK_TARGET_OS" = xwindows; then
- # On Windows, we will need both .lib and .dll file.
- if ! test -s "$POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib. Ignoring location." >&5
-$as_echo "$as_me: Could not find $POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib. Ignoring location." >&6;}
- FOUND_FREETYPE=no
- fi
- elif test "x$OPENJDK_TARGET_OS" = xsolaris \
- && test -s "$POTENTIAL_FREETYPE_LIB_PATH$OPENJDK_TARGET_CPU_ISADIR/$FREETYPE_LIB_NAME"; then
- # Found lib in isa dir, use that instead.
- POTENTIAL_FREETYPE_LIB_PATH="$POTENTIAL_FREETYPE_LIB_PATH$OPENJDK_TARGET_CPU_ISADIR"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting to use $POTENTIAL_FREETYPE_LIB_PATH instead" >&5
-$as_echo "$as_me: Rewriting to use $POTENTIAL_FREETYPE_LIB_PATH instead" >&6;}
- fi
- fi
- fi
-
- if test "x$FOUND_FREETYPE" = xyes; then
-
- # Only process if variable expands to non-empty
-
- if test "x$POTENTIAL_FREETYPE_INCLUDE_PATH" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- path="$POTENTIAL_FREETYPE_INCLUDE_PATH"
- new_path=`$CYGPATH -u "$path"`
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file precense.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Cannot locate the the path of POTENTIAL_FREETYPE_INCLUDE_PATH" "$LINENO" 5
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
-
- if test "x$path" != "x$new_path"; then
- POTENTIAL_FREETYPE_INCLUDE_PATH="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting POTENTIAL_FREETYPE_INCLUDE_PATH to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting POTENTIAL_FREETYPE_INCLUDE_PATH to \"$new_path\"" >&6;}
- fi
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- path="$POTENTIAL_FREETYPE_INCLUDE_PATH"
- has_colon=`$ECHO $path | $GREP ^.:`
- new_path="$path"
- if test "x$has_colon" = x; then
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $path`
- fi
-
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- if test "x$path" != "x$new_path"; then
- POTENTIAL_FREETYPE_INCLUDE_PATH="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting POTENTIAL_FREETYPE_INCLUDE_PATH to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting POTENTIAL_FREETYPE_INCLUDE_PATH to \"$new_path\"" >&6;}
- fi
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
-
- else
- # We're on a unix platform. Hooray! :)
- path="$POTENTIAL_FREETYPE_INCLUDE_PATH"
- has_space=`$ECHO "$path" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
- fi
-
- # Use eval to expand a potential ~
- eval path="$path"
- if test ! -f "$path" && test ! -d "$path"; then
- as_fn_error $? "The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is not found." "$LINENO" 5
- fi
-
- if test -d "$path"; then
- POTENTIAL_FREETYPE_INCLUDE_PATH="`cd "$path"; $THEPWDCMD -L`"
- else
- dir="`$DIRNAME "$path"`"
- base="`$BASENAME "$path"`"
- POTENTIAL_FREETYPE_INCLUDE_PATH="`cd "$dir"; $THEPWDCMD -L`/$base"
- fi
- fi
- fi
-
-
- # Only process if variable expands to non-empty
-
- if test "x$POTENTIAL_FREETYPE_LIB_PATH" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- path="$POTENTIAL_FREETYPE_LIB_PATH"
- new_path=`$CYGPATH -u "$path"`
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file precense.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Cannot locate the the path of POTENTIAL_FREETYPE_LIB_PATH" "$LINENO" 5
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
-
- if test "x$path" != "x$new_path"; then
- POTENTIAL_FREETYPE_LIB_PATH="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting POTENTIAL_FREETYPE_LIB_PATH to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting POTENTIAL_FREETYPE_LIB_PATH to \"$new_path\"" >&6;}
- fi
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- path="$POTENTIAL_FREETYPE_LIB_PATH"
- has_colon=`$ECHO $path | $GREP ^.:`
- new_path="$path"
- if test "x$has_colon" = x; then
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $path`
- fi
-
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- if test "x$path" != "x$new_path"; then
- POTENTIAL_FREETYPE_LIB_PATH="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting POTENTIAL_FREETYPE_LIB_PATH to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting POTENTIAL_FREETYPE_LIB_PATH to \"$new_path\"" >&6;}
- fi
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
-
- else
- # We're on a unix platform. Hooray! :)
- path="$POTENTIAL_FREETYPE_LIB_PATH"
- has_space=`$ECHO "$path" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
- fi
-
- # Use eval to expand a potential ~
- eval path="$path"
- if test ! -f "$path" && test ! -d "$path"; then
- as_fn_error $? "The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is not found." "$LINENO" 5
- fi
-
- if test -d "$path"; then
- POTENTIAL_FREETYPE_LIB_PATH="`cd "$path"; $THEPWDCMD -L`"
- else
- dir="`$DIRNAME "$path"`"
- base="`$BASENAME "$path"`"
- POTENTIAL_FREETYPE_LIB_PATH="`cd "$dir"; $THEPWDCMD -L`/$base"
- fi
- fi
- fi
-
-
- FREETYPE_INCLUDE_PATH="$POTENTIAL_FREETYPE_INCLUDE_PATH"
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for freetype includes" >&5
-$as_echo_n "checking for freetype includes... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $FREETYPE_INCLUDE_PATH" >&5
-$as_echo "$FREETYPE_INCLUDE_PATH" >&6; }
- FREETYPE_LIB_PATH="$POTENTIAL_FREETYPE_LIB_PATH"
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for freetype libraries" >&5
-$as_echo_n "checking for freetype libraries... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $FREETYPE_LIB_PATH" >&5
-$as_echo "$FREETYPE_LIB_PATH" >&6; }
- fi
-
- if test "x$FOUND_FREETYPE" != xyes; then
-
- POTENTIAL_FREETYPE_INCLUDE_PATH="$FREETYPE_BASE_DIR/include"
- POTENTIAL_FREETYPE_LIB_PATH="$FREETYPE_BASE_DIR/lib32"
- METHOD="well-known location"
-
- # Let's start with an optimistic view of the world :-)
- FOUND_FREETYPE=yes
-
- # First look for the canonical freetype main include file ft2build.h.
- if ! test -s "$POTENTIAL_FREETYPE_INCLUDE_PATH/ft2build.h"; then
- # Oh no! Let's try in the freetype2 directory. This is needed at least at Mac OS X Yosemite.
- POTENTIAL_FREETYPE_INCLUDE_PATH="$POTENTIAL_FREETYPE_INCLUDE_PATH/freetype2"
- if ! test -s "$POTENTIAL_FREETYPE_INCLUDE_PATH/ft2build.h"; then
- # Fail.
- FOUND_FREETYPE=no
- fi
- fi
-
- if test "x$FOUND_FREETYPE" = xyes; then
- # Include file found, let's continue the sanity check.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found freetype include files at $POTENTIAL_FREETYPE_INCLUDE_PATH using $METHOD" >&5
-$as_echo "$as_me: Found freetype include files at $POTENTIAL_FREETYPE_INCLUDE_PATH using $METHOD" >&6;}
-
- # Reset to default value
- FREETYPE_BASE_NAME=freetype
- FREETYPE_LIB_NAME="${LIBRARY_PREFIX}${FREETYPE_BASE_NAME}${SHARED_LIBRARY_SUFFIX}"
- if ! test -s "$POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME"; then
- if test "x$OPENJDK_TARGET_OS" = xmacosx \
- && test -s "$POTENTIAL_FREETYPE_LIB_PATH/${LIBRARY_PREFIX}freetype.6${SHARED_LIBRARY_SUFFIX}"; then
- # On Mac OS X Yosemite, the symlink from libfreetype.dylib to libfreetype.6.dylib disappeared. Check
- # for the .6 version explicitly.
- FREETYPE_BASE_NAME=freetype.6
- FREETYPE_LIB_NAME="${LIBRARY_PREFIX}${FREETYPE_BASE_NAME}${SHARED_LIBRARY_SUFFIX}"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Compensating for missing symlink by using version 6 explicitly" >&5
-$as_echo "$as_me: Compensating for missing symlink by using version 6 explicitly" >&6;}
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME. Ignoring location." >&5
-$as_echo "$as_me: Could not find $POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME. Ignoring location." >&6;}
- FOUND_FREETYPE=no
- fi
- else
- if test "x$OPENJDK_TARGET_OS" = xwindows; then
- # On Windows, we will need both .lib and .dll file.
- if ! test -s "$POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib. Ignoring location." >&5
-$as_echo "$as_me: Could not find $POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib. Ignoring location." >&6;}
- FOUND_FREETYPE=no
- fi
- elif test "x$OPENJDK_TARGET_OS" = xsolaris \
- && test -s "$POTENTIAL_FREETYPE_LIB_PATH$OPENJDK_TARGET_CPU_ISADIR/$FREETYPE_LIB_NAME"; then
- # Found lib in isa dir, use that instead.
- POTENTIAL_FREETYPE_LIB_PATH="$POTENTIAL_FREETYPE_LIB_PATH$OPENJDK_TARGET_CPU_ISADIR"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting to use $POTENTIAL_FREETYPE_LIB_PATH instead" >&5
-$as_echo "$as_me: Rewriting to use $POTENTIAL_FREETYPE_LIB_PATH instead" >&6;}
- fi
- fi
- fi
-
- if test "x$FOUND_FREETYPE" = xyes; then
-
- # Only process if variable expands to non-empty
-
- if test "x$POTENTIAL_FREETYPE_INCLUDE_PATH" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- path="$POTENTIAL_FREETYPE_INCLUDE_PATH"
- new_path=`$CYGPATH -u "$path"`
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file precense.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Cannot locate the the path of POTENTIAL_FREETYPE_INCLUDE_PATH" "$LINENO" 5
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
-
- if test "x$path" != "x$new_path"; then
- POTENTIAL_FREETYPE_INCLUDE_PATH="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting POTENTIAL_FREETYPE_INCLUDE_PATH to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting POTENTIAL_FREETYPE_INCLUDE_PATH to \"$new_path\"" >&6;}
- fi
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- path="$POTENTIAL_FREETYPE_INCLUDE_PATH"
- has_colon=`$ECHO $path | $GREP ^.:`
- new_path="$path"
- if test "x$has_colon" = x; then
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $path`
- fi
-
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- if test "x$path" != "x$new_path"; then
- POTENTIAL_FREETYPE_INCLUDE_PATH="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting POTENTIAL_FREETYPE_INCLUDE_PATH to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting POTENTIAL_FREETYPE_INCLUDE_PATH to \"$new_path\"" >&6;}
- fi
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
-
- else
- # We're on a unix platform. Hooray! :)
- path="$POTENTIAL_FREETYPE_INCLUDE_PATH"
- has_space=`$ECHO "$path" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
- fi
-
- # Use eval to expand a potential ~
- eval path="$path"
- if test ! -f "$path" && test ! -d "$path"; then
- as_fn_error $? "The path of POTENTIAL_FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is not found." "$LINENO" 5
- fi
-
- if test -d "$path"; then
- POTENTIAL_FREETYPE_INCLUDE_PATH="`cd "$path"; $THEPWDCMD -L`"
- else
- dir="`$DIRNAME "$path"`"
- base="`$BASENAME "$path"`"
- POTENTIAL_FREETYPE_INCLUDE_PATH="`cd "$dir"; $THEPWDCMD -L`/$base"
- fi
- fi
- fi
-
-
- # Only process if variable expands to non-empty
-
- if test "x$POTENTIAL_FREETYPE_LIB_PATH" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- path="$POTENTIAL_FREETYPE_LIB_PATH"
- new_path=`$CYGPATH -u "$path"`
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file precense.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Cannot locate the the path of POTENTIAL_FREETYPE_LIB_PATH" "$LINENO" 5
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
-
- if test "x$path" != "x$new_path"; then
- POTENTIAL_FREETYPE_LIB_PATH="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting POTENTIAL_FREETYPE_LIB_PATH to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting POTENTIAL_FREETYPE_LIB_PATH to \"$new_path\"" >&6;}
- fi
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- path="$POTENTIAL_FREETYPE_LIB_PATH"
- has_colon=`$ECHO $path | $GREP ^.:`
- new_path="$path"
- if test "x$has_colon" = x; then
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $path`
- fi
-
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- if test "x$path" != "x$new_path"; then
- POTENTIAL_FREETYPE_LIB_PATH="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting POTENTIAL_FREETYPE_LIB_PATH to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting POTENTIAL_FREETYPE_LIB_PATH to \"$new_path\"" >&6;}
- fi
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
-
- else
- # We're on a unix platform. Hooray! :)
- path="$POTENTIAL_FREETYPE_LIB_PATH"
- has_space=`$ECHO "$path" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
- fi
-
- # Use eval to expand a potential ~
- eval path="$path"
- if test ! -f "$path" && test ! -d "$path"; then
- as_fn_error $? "The path of POTENTIAL_FREETYPE_LIB_PATH, which resolves as \"$path\", is not found." "$LINENO" 5
- fi
-
- if test -d "$path"; then
- POTENTIAL_FREETYPE_LIB_PATH="`cd "$path"; $THEPWDCMD -L`"
- else
- dir="`$DIRNAME "$path"`"
- base="`$BASENAME "$path"`"
- POTENTIAL_FREETYPE_LIB_PATH="`cd "$dir"; $THEPWDCMD -L`/$base"
- fi
- fi
- fi
-
-
- FREETYPE_INCLUDE_PATH="$POTENTIAL_FREETYPE_INCLUDE_PATH"
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for freetype includes" >&5
-$as_echo_n "checking for freetype includes... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $FREETYPE_INCLUDE_PATH" >&5
-$as_echo "$FREETYPE_INCLUDE_PATH" >&6; }
- FREETYPE_LIB_PATH="$POTENTIAL_FREETYPE_LIB_PATH"
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for freetype libraries" >&5
-$as_echo_n "checking for freetype libraries... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $FREETYPE_LIB_PATH" >&5
-$as_echo "$FREETYPE_LIB_PATH" >&6; }
- fi
-
- fi
- fi
- fi
- fi
- fi # end check in well-known locations
-
- if test "x$FOUND_FREETYPE" != xyes; then
-
- # Print a helpful message on how to acquire the necessary build dependency.
- # freetype is the help tag: freetype, cups, alsa etc
- MISSING_DEPENDENCY=freetype
-
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- cygwin_help $MISSING_DEPENDENCY
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- msys_help $MISSING_DEPENDENCY
- else
- PKGHANDLER_COMMAND=
-
- case $PKGHANDLER in
- apt-get)
- apt_help $MISSING_DEPENDENCY ;;
- yum)
- yum_help $MISSING_DEPENDENCY ;;
- brew)
- brew_help $MISSING_DEPENDENCY ;;
- port)
- port_help $MISSING_DEPENDENCY ;;
- pkgutil)
- pkgutil_help $MISSING_DEPENDENCY ;;
- pkgadd)
- pkgadd_help $MISSING_DEPENDENCY ;;
- esac
-
- if test "x$PKGHANDLER_COMMAND" != x; then
- HELP_MSG="You might be able to fix this by running '$PKGHANDLER_COMMAND'."
- fi
- fi
-
- as_fn_error $? "Could not find freetype! $HELP_MSG " "$LINENO" 5
- fi
- fi # end user specified settings
-
- # Set FREETYPE_CFLAGS, _LIBS and _LIB_PATH from include and lib dir.
- if test "x$FREETYPE_CFLAGS" = x; then
-
- # Only process if variable expands to non-empty
-
- if test "x$FREETYPE_INCLUDE_PATH" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- path="$FREETYPE_INCLUDE_PATH"
- new_path=`$CYGPATH -u "$path"`
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file precense.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Cannot locate the the path of FREETYPE_INCLUDE_PATH" "$LINENO" 5
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
-
- if test "x$path" != "x$new_path"; then
- FREETYPE_INCLUDE_PATH="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting FREETYPE_INCLUDE_PATH to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting FREETYPE_INCLUDE_PATH to \"$new_path\"" >&6;}
- fi
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- path="$FREETYPE_INCLUDE_PATH"
- has_colon=`$ECHO $path | $GREP ^.:`
- new_path="$path"
- if test "x$has_colon" = x; then
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $path`
- fi
-
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- if test "x$path" != "x$new_path"; then
- FREETYPE_INCLUDE_PATH="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting FREETYPE_INCLUDE_PATH to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting FREETYPE_INCLUDE_PATH to \"$new_path\"" >&6;}
- fi
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
-
- else
- # We're on a unix platform. Hooray! :)
- path="$FREETYPE_INCLUDE_PATH"
- has_space=`$ECHO "$path" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
- fi
-
- # Use eval to expand a potential ~
- eval path="$path"
- if test ! -f "$path" && test ! -d "$path"; then
- as_fn_error $? "The path of FREETYPE_INCLUDE_PATH, which resolves as \"$path\", is not found." "$LINENO" 5
- fi
-
- if test -d "$path"; then
- FREETYPE_INCLUDE_PATH="`cd "$path"; $THEPWDCMD -L`"
- else
- dir="`$DIRNAME "$path"`"
- base="`$BASENAME "$path"`"
- FREETYPE_INCLUDE_PATH="`cd "$dir"; $THEPWDCMD -L`/$base"
- fi
- fi
- fi
-
- if test -d $FREETYPE_INCLUDE_PATH/freetype2/freetype; then
- FREETYPE_CFLAGS="-I$FREETYPE_INCLUDE_PATH/freetype2 -I$FREETYPE_INCLUDE_PATH"
- else
- FREETYPE_CFLAGS="-I$FREETYPE_INCLUDE_PATH"
- fi
- fi
-
- if test "x$FREETYPE_LIBS" = x; then
-
- # Only process if variable expands to non-empty
-
- if test "x$FREETYPE_LIB_PATH" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- path="$FREETYPE_LIB_PATH"
- new_path=`$CYGPATH -u "$path"`
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file precense.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of FREETYPE_LIB_PATH, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of FREETYPE_LIB_PATH, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Cannot locate the the path of FREETYPE_LIB_PATH" "$LINENO" 5
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
-
- if test "x$path" != "x$new_path"; then
- FREETYPE_LIB_PATH="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting FREETYPE_LIB_PATH to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting FREETYPE_LIB_PATH to \"$new_path\"" >&6;}
- fi
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- path="$FREETYPE_LIB_PATH"
- has_colon=`$ECHO $path | $GREP ^.:`
- new_path="$path"
- if test "x$has_colon" = x; then
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $path`
- fi
-
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- if test "x$path" != "x$new_path"; then
- FREETYPE_LIB_PATH="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting FREETYPE_LIB_PATH to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting FREETYPE_LIB_PATH to \"$new_path\"" >&6;}
- fi
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
-
- else
- # We're on a unix platform. Hooray! :)
- path="$FREETYPE_LIB_PATH"
- has_space=`$ECHO "$path" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of FREETYPE_LIB_PATH, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of FREETYPE_LIB_PATH, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
- fi
-
- # Use eval to expand a potential ~
- eval path="$path"
- if test ! -f "$path" && test ! -d "$path"; then
- as_fn_error $? "The path of FREETYPE_LIB_PATH, which resolves as \"$path\", is not found." "$LINENO" 5
- fi
-
- if test -d "$path"; then
- FREETYPE_LIB_PATH="`cd "$path"; $THEPWDCMD -L`"
- else
- dir="`$DIRNAME "$path"`"
- base="`$BASENAME "$path"`"
- FREETYPE_LIB_PATH="`cd "$dir"; $THEPWDCMD -L`/$base"
- fi
- fi
- fi
-
- if test "x$OPENJDK_TARGET_OS" = xwindows; then
- FREETYPE_LIBS="$FREETYPE_LIB_PATH/$FREETYPE_BASE_NAME.lib"
- else
- FREETYPE_LIBS="-L$FREETYPE_LIB_PATH -l$FREETYPE_BASE_NAME"
- fi
- fi
-
- # Try to compile it
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can compile and link with freetype" >&5
-$as_echo_n "checking if we can compile and link with freetype... " >&6; }
- ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
- PREV_CXXCFLAGS="$CXXFLAGS"
- PREV_LIBS="$LIBS"
- PREV_CXX="$CXX"
- CXXFLAGS="$CXXFLAGS $FREETYPE_CFLAGS"
- LIBS="$LIBS $FREETYPE_LIBS"
- CXX="$FIXPATH $CXX"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
- #include
- #include FT_FREETYPE_H
- int main () {
- FT_Init_FreeType(NULL);
- return 0;
- }
-
-_ACEOF
-if ac_fn_cxx_try_link "$LINENO"; then :
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-
-else
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not compile and link with freetype. This might be a 32/64-bit mismatch." >&5
-$as_echo "$as_me: Could not compile and link with freetype. This might be a 32/64-bit mismatch." >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: Using FREETYPE_CFLAGS=$FREETYPE_CFLAGS and FREETYPE_LIBS=$FREETYPE_LIBS" >&5
-$as_echo "$as_me: Using FREETYPE_CFLAGS=$FREETYPE_CFLAGS and FREETYPE_LIBS=$FREETYPE_LIBS" >&6;}
-
-
- # Print a helpful message on how to acquire the necessary build dependency.
- # freetype is the help tag: freetype, cups, alsa etc
- MISSING_DEPENDENCY=freetype
-
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- cygwin_help $MISSING_DEPENDENCY
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- msys_help $MISSING_DEPENDENCY
- else
- PKGHANDLER_COMMAND=
-
- case $PKGHANDLER in
- apt-get)
- apt_help $MISSING_DEPENDENCY ;;
- yum)
- yum_help $MISSING_DEPENDENCY ;;
- brew)
- brew_help $MISSING_DEPENDENCY ;;
- port)
- port_help $MISSING_DEPENDENCY ;;
- pkgutil)
- pkgutil_help $MISSING_DEPENDENCY ;;
- pkgadd)
- pkgadd_help $MISSING_DEPENDENCY ;;
- esac
-
- if test "x$PKGHANDLER_COMMAND" != x; then
- HELP_MSG="You might be able to fix this by running '$PKGHANDLER_COMMAND'."
- fi
- fi
-
-
- as_fn_error $? "Can not continue without freetype. $HELP_MSG" "$LINENO" 5
-
-
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
- CXXCFLAGS="$PREV_CXXFLAGS"
- LIBS="$PREV_LIBS"
- CXX="$PREV_CXX"
- ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we should bundle freetype" >&5
-$as_echo_n "checking if we should bundle freetype... " >&6; }
- if test "x$BUNDLE_FREETYPE" = xyes; then
- FREETYPE_BUNDLE_LIB_PATH="$FREETYPE_LIB_PATH"
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BUNDLE_FREETYPE" >&5
-$as_echo "$BUNDLE_FREETYPE" >&6; }
-
- if test "x$BUNDLE_FREETYPE" = xyes; then
- FREETYPE_LICENSE=""
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for freetype license" >&5
-$as_echo_n "checking for freetype license... " >&6; }
- if test "x$with_freetype_license" = "xyes"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- as_fn_error $? "--with-freetype-license must have a value" "$LINENO" 5
- elif test "x$with_freetype_license" != "x"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_freetype_license" >&5
-$as_echo "$with_freetype_license" >&6; }
- FREETYPE_LICENSE="$with_freetype_license"
-
- # Only process if variable expands to non-empty
-
- if test "x$FREETYPE_LICENSE" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- path="$FREETYPE_LICENSE"
- new_path=`$CYGPATH -u "$path"`
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file precense.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of FREETYPE_LICENSE, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of FREETYPE_LICENSE, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Cannot locate the the path of FREETYPE_LICENSE" "$LINENO" 5
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
-
- if test "x$path" != "x$new_path"; then
- FREETYPE_LICENSE="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting FREETYPE_LICENSE to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting FREETYPE_LICENSE to \"$new_path\"" >&6;}
- fi
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- path="$FREETYPE_LICENSE"
- has_colon=`$ECHO $path | $GREP ^.:`
- new_path="$path"
- if test "x$has_colon" = x; then
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $path`
- fi
-
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- if test "x$path" != "x$new_path"; then
- FREETYPE_LICENSE="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting FREETYPE_LICENSE to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting FREETYPE_LICENSE to \"$new_path\"" >&6;}
- fi
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
-
- else
- # We're on a unix platform. Hooray! :)
- path="$FREETYPE_LICENSE"
- has_space=`$ECHO "$path" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of FREETYPE_LICENSE, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of FREETYPE_LICENSE, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
- fi
-
- # Use eval to expand a potential ~
- eval path="$path"
- if test ! -f "$path" && test ! -d "$path"; then
- as_fn_error $? "The path of FREETYPE_LICENSE, which resolves as \"$path\", is not found." "$LINENO" 5
- fi
-
- if test -d "$path"; then
- FREETYPE_LICENSE="`cd "$path"; $THEPWDCMD -L`"
- else
- dir="`$DIRNAME "$path"`"
- base="`$BASENAME "$path"`"
- FREETYPE_LICENSE="`cd "$dir"; $THEPWDCMD -L`/$base"
- fi
- fi
- fi
-
- if test ! -f "$FREETYPE_LICENSE"; then
- as_fn_error $? "$FREETYPE_LICENSE cannot be found" "$LINENO" 5
- fi
- else
- if test "x$with_freetype" != "x" && test -f $with_freetype/freetype.md; then
- FREETYPE_LICENSE="$with_freetype/freetype.md"
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $FREETYPE_LICENSE" >&5
-$as_echo "$FREETYPE_LICENSE" >&6; }
-
- # Only process if variable expands to non-empty
-
- if test "x$FREETYPE_LICENSE" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- path="$FREETYPE_LICENSE"
- new_path=`$CYGPATH -u "$path"`
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file precense.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of FREETYPE_LICENSE, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of FREETYPE_LICENSE, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Cannot locate the the path of FREETYPE_LICENSE" "$LINENO" 5
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
-
- if test "x$path" != "x$new_path"; then
- FREETYPE_LICENSE="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting FREETYPE_LICENSE to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting FREETYPE_LICENSE to \"$new_path\"" >&6;}
- fi
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- path="$FREETYPE_LICENSE"
- has_colon=`$ECHO $path | $GREP ^.:`
- new_path="$path"
- if test "x$has_colon" = x; then
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $path`
- fi
-
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- if test "x$path" != "x$new_path"; then
- FREETYPE_LICENSE="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting FREETYPE_LICENSE to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting FREETYPE_LICENSE to \"$new_path\"" >&6;}
- fi
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
-
- else
- # We're on a unix platform. Hooray! :)
- path="$FREETYPE_LICENSE"
- has_space=`$ECHO "$path" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of FREETYPE_LICENSE, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of FREETYPE_LICENSE, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
- fi
-
- # Use eval to expand a potential ~
- eval path="$path"
- if test ! -f "$path" && test ! -d "$path"; then
- as_fn_error $? "The path of FREETYPE_LICENSE, which resolves as \"$path\", is not found." "$LINENO" 5
- fi
-
- if test -d "$path"; then
- FREETYPE_LICENSE="`cd "$path"; $THEPWDCMD -L`"
- else
- dir="`$DIRNAME "$path"`"
- base="`$BASENAME "$path"`"
- FREETYPE_LICENSE="`cd "$dir"; $THEPWDCMD -L`/$base"
- fi
- fi
- fi
-
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- fi
- fi
- fi
-
- fi # end freetype needed
-
-
-
-
-
-
-
-
-# Check whether --with-alsa was given.
-if test "${with_alsa+set}" = set; then :
- withval=$with_alsa;
-fi
-
-
-# Check whether --with-alsa-include was given.
-if test "${with_alsa_include+set}" = set; then :
- withval=$with_alsa_include;
-fi
-
-
-# Check whether --with-alsa-lib was given.
-if test "${with_alsa_lib+set}" = set; then :
- withval=$with_alsa_lib;
-fi
-
-
- if test "x$NEEDS_LIB_ALSA" = xfalse; then
- if (test "x${with_alsa}" != x && test "x${with_alsa}" != xno) || \
- (test "x${with_alsa_include}" != x && test "x${with_alsa_include}" != xno) || \
- (test "x${with_alsa_lib}" != x && test "x${with_alsa_lib}" != xno); then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: alsa not used, so --with-alsa[-*] is ignored" >&5
-$as_echo "$as_me: WARNING: alsa not used, so --with-alsa[-*] is ignored" >&2;}
- fi
- ALSA_CFLAGS=
- ALSA_LIBS=
- else
- ALSA_FOUND=no
-
- if test "x${with_alsa}" = xno || test "x${with_alsa_include}" = xno || test "x${with_alsa_lib}" = xno; then
- as_fn_error $? "It is not possible to disable the use of alsa. Remove the --without-alsa option." "$LINENO" 5
- fi
-
- if test "x${with_alsa}" != x; then
- ALSA_LIBS="-L${with_alsa}/lib -lasound"
- ALSA_CFLAGS="-I${with_alsa}/include"
- ALSA_FOUND=yes
- fi
- if test "x${with_alsa_include}" != x; then
- ALSA_CFLAGS="-I${with_alsa_include}"
- ALSA_FOUND=yes
- fi
- if test "x${with_alsa_lib}" != x; then
- ALSA_LIBS="-L${with_alsa_lib} -lasound"
- ALSA_FOUND=yes
- fi
- # Do not try pkg-config if we have a sysroot set.
- if test "x$SYSROOT" = x; then
- if test "x$ALSA_FOUND" = xno; then
-
-pkg_failed=no
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ALSA" >&5
-$as_echo_n "checking for ALSA... " >&6; }
-
-if test -n "$ALSA_CFLAGS"; then
- pkg_cv_ALSA_CFLAGS="$ALSA_CFLAGS"
- elif test -n "$PKG_CONFIG"; then
- if test -n "$PKG_CONFIG" && \
- { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"alsa\""; } >&5
- ($PKG_CONFIG --exists --print-errors "alsa") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; then
- pkg_cv_ALSA_CFLAGS=`$PKG_CONFIG --cflags "alsa" 2>/dev/null`
-else
- pkg_failed=yes
-fi
- else
- pkg_failed=untried
-fi
-if test -n "$ALSA_LIBS"; then
- pkg_cv_ALSA_LIBS="$ALSA_LIBS"
- elif test -n "$PKG_CONFIG"; then
- if test -n "$PKG_CONFIG" && \
- { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"alsa\""; } >&5
- ($PKG_CONFIG --exists --print-errors "alsa") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; then
- pkg_cv_ALSA_LIBS=`$PKG_CONFIG --libs "alsa" 2>/dev/null`
-else
- pkg_failed=yes
-fi
- else
- pkg_failed=untried
-fi
-
-
-
-if test $pkg_failed = yes; then
-
-if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
- _pkg_short_errors_supported=yes
-else
- _pkg_short_errors_supported=no
-fi
- if test $_pkg_short_errors_supported = yes; then
- ALSA_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "alsa" 2>&1`
- else
- ALSA_PKG_ERRORS=`$PKG_CONFIG --print-errors "alsa" 2>&1`
- fi
- # Put the nasty error message in config.log where it belongs
- echo "$ALSA_PKG_ERRORS" >&5
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- ALSA_FOUND=no
-elif test $pkg_failed = untried; then
- ALSA_FOUND=no
-else
- ALSA_CFLAGS=$pkg_cv_ALSA_CFLAGS
- ALSA_LIBS=$pkg_cv_ALSA_LIBS
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
- ALSA_FOUND=yes
-fi
- fi
- fi
- if test "x$ALSA_FOUND" = xno; then
- for ac_header in alsa/asoundlib.h
-do :
- ac_fn_cxx_check_header_mongrel "$LINENO" "alsa/asoundlib.h" "ac_cv_header_alsa_asoundlib_h" "$ac_includes_default"
-if test "x$ac_cv_header_alsa_asoundlib_h" = xyes; then :
- cat >>confdefs.h <<_ACEOF
-#define HAVE_ALSA_ASOUNDLIB_H 1
-_ACEOF
-
- ALSA_FOUND=yes
- ALSA_CFLAGS=-Iignoreme
- ALSA_LIBS=-lasound
- DEFAULT_ALSA=yes
-
-else
- ALSA_FOUND=no
-
-fi
-
-done
-
- fi
- if test "x$ALSA_FOUND" = xno; then
-
- # Print a helpful message on how to acquire the necessary build dependency.
- # alsa is the help tag: freetype, cups, alsa etc
- MISSING_DEPENDENCY=alsa
-
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- cygwin_help $MISSING_DEPENDENCY
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- msys_help $MISSING_DEPENDENCY
- else
- PKGHANDLER_COMMAND=
-
- case $PKGHANDLER in
- apt-get)
- apt_help $MISSING_DEPENDENCY ;;
- yum)
- yum_help $MISSING_DEPENDENCY ;;
- brew)
- brew_help $MISSING_DEPENDENCY ;;
- port)
- port_help $MISSING_DEPENDENCY ;;
- pkgutil)
- pkgutil_help $MISSING_DEPENDENCY ;;
- pkgadd)
- pkgadd_help $MISSING_DEPENDENCY ;;
- esac
-
- if test "x$PKGHANDLER_COMMAND" != x; then
- HELP_MSG="You might be able to fix this by running '$PKGHANDLER_COMMAND'."
- fi
- fi
-
- as_fn_error $? "Could not find alsa! $HELP_MSG" "$LINENO" 5
- fi
- fi
-
-
-
-
-
-
-# Check whether --with-libffi was given.
-if test "${with_libffi+set}" = set; then :
- withval=$with_libffi;
-fi
-
-
-# Check whether --with-libffi-include was given.
-if test "${with_libffi_include+set}" = set; then :
- withval=$with_libffi_include;
-fi
-
-
-# Check whether --with-libffi-lib was given.
-if test "${with_libffi_lib+set}" = set; then :
- withval=$with_libffi_lib;
-fi
-
- # Check whether --enable-libffi-bundling was given.
-if test "${enable_libffi_bundling+set}" = set; then :
- enableval=$enable_libffi_bundling;
-fi
-
-
- if test "x$NEEDS_LIB_FFI" = xfalse; then
- if (test "x${with_libffi}" != x && test "x${with_libffi}" != xno) || \
- (test "x${with_libffi_include}" != x && test "x${with_libffi_include}" != xno) || \
- (test "x${with_libffi_lib}" != x && test "x${with_libffi_lib}" != xno); then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: libffi not used, so --with-libffi[-*] is ignored" >&5
-$as_echo "$as_me: WARNING: libffi not used, so --with-libffi[-*] is ignored" >&2;}
- fi
- LIBFFI_CFLAGS=
- LIBFFI_LIBS=
- else
- LIBFFI_FOUND=no
-
- if test "x${with_libffi}" = xno || test "x${with_libffi_include}" = xno || test "x${with_libffi_lib}" = xno; then
- as_fn_error $? "It is not possible to disable the use of libffi. Remove the --without-libffi option." "$LINENO" 5
- fi
-
- if test "x${with_libffi}" != x; then
- LIBFFI_LIB_PATH="${with_libffi}/lib"
- LIBFFI_LIBS="-L${with_libffi}/lib -lffi"
- LIBFFI_CFLAGS="-I${with_libffi}/include"
- LIBFFI_FOUND=yes
- fi
- if test "x${with_libffi_include}" != x; then
- LIBFFI_CFLAGS="-I${with_libffi_include}"
- LIBFFI_FOUND=yes
- fi
- if test "x${with_libffi_lib}" != x; then
- LIBFFI_LIB_PATH="${with_libffi_lib}"
- LIBFFI_LIBS="-L${with_libffi_lib} -lffi"
- LIBFFI_FOUND=yes
- fi
- # Do not try pkg-config if we have a sysroot set.
- if test "x$SYSROOT" = x; then
- if test "x$LIBFFI_FOUND" = xno; then
- # Figure out LIBFFI_CFLAGS and LIBFFI_LIBS
-
-pkg_failed=no
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for LIBFFI" >&5
-$as_echo_n "checking for LIBFFI... " >&6; }
-
-if test -n "$LIBFFI_CFLAGS"; then
- pkg_cv_LIBFFI_CFLAGS="$LIBFFI_CFLAGS"
- elif test -n "$PKG_CONFIG"; then
- if test -n "$PKG_CONFIG" && \
- { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libffi\""; } >&5
- ($PKG_CONFIG --exists --print-errors "libffi") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; then
- pkg_cv_LIBFFI_CFLAGS=`$PKG_CONFIG --cflags "libffi" 2>/dev/null`
-else
- pkg_failed=yes
-fi
- else
- pkg_failed=untried
-fi
-if test -n "$LIBFFI_LIBS"; then
- pkg_cv_LIBFFI_LIBS="$LIBFFI_LIBS"
- elif test -n "$PKG_CONFIG"; then
- if test -n "$PKG_CONFIG" && \
- { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libffi\""; } >&5
- ($PKG_CONFIG --exists --print-errors "libffi") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; then
- pkg_cv_LIBFFI_LIBS=`$PKG_CONFIG --libs "libffi" 2>/dev/null`
-else
- pkg_failed=yes
-fi
- else
- pkg_failed=untried
-fi
-
-
-
-if test $pkg_failed = yes; then
-
-if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
- _pkg_short_errors_supported=yes
-else
- _pkg_short_errors_supported=no
-fi
- if test $_pkg_short_errors_supported = yes; then
- LIBFFI_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "libffi" 2>&1`
- else
- LIBFFI_PKG_ERRORS=`$PKG_CONFIG --print-errors "libffi" 2>&1`
- fi
- # Put the nasty error message in config.log where it belongs
- echo "$LIBFFI_PKG_ERRORS" >&5
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- LIBFFI_FOUND=no
-elif test $pkg_failed = untried; then
- LIBFFI_FOUND=no
-else
- LIBFFI_CFLAGS=$pkg_cv_LIBFFI_CFLAGS
- LIBFFI_LIBS=$pkg_cv_LIBFFI_LIBS
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
- LIBFFI_FOUND=yes
-fi
- fi
- fi
- if test "x$LIBFFI_FOUND" = xno; then
- for ac_header in ffi.h
-do :
- ac_fn_cxx_check_header_mongrel "$LINENO" "ffi.h" "ac_cv_header_ffi_h" "$ac_includes_default"
-if test "x$ac_cv_header_ffi_h" = xyes; then :
- cat >>confdefs.h <<_ACEOF
-#define HAVE_FFI_H 1
-_ACEOF
-
- LIBFFI_FOUND=yes
- LIBFFI_CFLAGS=
- LIBFFI_LIBS=-lffi
-
-else
- LIBFFI_FOUND=no
-
-fi
-
-done
-
- fi
- if test "x$LIBFFI_FOUND" = xno; then
-
- # Print a helpful message on how to acquire the necessary build dependency.
- # ffi is the help tag: freetype, cups, alsa etc
- MISSING_DEPENDENCY=ffi
-
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- cygwin_help $MISSING_DEPENDENCY
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- msys_help $MISSING_DEPENDENCY
- else
- PKGHANDLER_COMMAND=
-
- case $PKGHANDLER in
- apt-get)
- apt_help $MISSING_DEPENDENCY ;;
- yum)
- yum_help $MISSING_DEPENDENCY ;;
- brew)
- brew_help $MISSING_DEPENDENCY ;;
- port)
- port_help $MISSING_DEPENDENCY ;;
- pkgutil)
- pkgutil_help $MISSING_DEPENDENCY ;;
- pkgadd)
- pkgadd_help $MISSING_DEPENDENCY ;;
- esac
-
- if test "x$PKGHANDLER_COMMAND" != x; then
- HELP_MSG="You might be able to fix this by running '$PKGHANDLER_COMMAND'."
- fi
- fi
-
- as_fn_error $? "Could not find libffi! $HELP_MSG" "$LINENO" 5
- fi
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libffi works" >&5
-$as_echo_n "checking if libffi works... " >&6; }
- ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
- OLD_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS $LIBFFI_CFLAGS"
- OLD_LIBS="$LIBS"
- LIBS="$LIBS $LIBFFI_LIBS"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include
-int
-main ()
-{
-
- ffi_call(NULL, NULL, NULL, NULL);
- return 0;
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- LIBFFI_WORKS=yes
-else
- LIBFFI_WORKS=no
-
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
- CFLAGS="$OLD_CFLAGS"
- LIBS="$OLD_LIBS"
- ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIBFFI_WORKS" >&5
-$as_echo "$LIBFFI_WORKS" >&6; }
-
- if test "x$LIBFFI_WORKS" = xno; then
-
- # Print a helpful message on how to acquire the necessary build dependency.
- # ffi is the help tag: freetype, cups, alsa etc
- MISSING_DEPENDENCY=ffi
-
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- cygwin_help $MISSING_DEPENDENCY
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- msys_help $MISSING_DEPENDENCY
- else
- PKGHANDLER_COMMAND=
-
- case $PKGHANDLER in
- apt-get)
- apt_help $MISSING_DEPENDENCY ;;
- yum)
- yum_help $MISSING_DEPENDENCY ;;
- brew)
- brew_help $MISSING_DEPENDENCY ;;
- port)
- port_help $MISSING_DEPENDENCY ;;
- pkgutil)
- pkgutil_help $MISSING_DEPENDENCY ;;
- pkgadd)
- pkgadd_help $MISSING_DEPENDENCY ;;
- esac
-
- if test "x$PKGHANDLER_COMMAND" != x; then
- HELP_MSG="You might be able to fix this by running '$PKGHANDLER_COMMAND'."
- fi
- fi
-
- as_fn_error $? "Found libffi but could not link and compile with it. $HELP_MSG" "$LINENO" 5
- fi
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libffi should be bundled" >&5
-$as_echo_n "checking if libffi should be bundled... " >&6; }
- if test "x$enable_libffi_bundling" = "x"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- ENABLE_LIBFFI_BUNDLING=false
- elif test "x$enable_libffi_bundling" = "xno"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, forced" >&5
-$as_echo "no, forced" >&6; }
- ENABLE_LIBFFI_BUNDLING=false
- elif test "x$enable_libffi_bundling" = "xyes"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes, forced" >&5
-$as_echo "yes, forced" >&6; }
- ENABLE_LIBFFI_BUNDLING=true
- else
- as_fn_error $? "Invalid value for --enable-libffi-bundling" "$LINENO" 5
- fi
-
- # Find the libffi.so.X to bundle
- if test "x${ENABLE_LIBFFI_BUNDLING}" = "xtrue"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for libffi lib file location" >&5
-$as_echo_n "checking for libffi lib file location... " >&6; }
- if test "x${LIBFFI_LIB_PATH}" != x; then
- if test -e ${LIBFFI_LIB_PATH}/libffi.so.?; then
- LIBFFI_LIB_FILE="${LIBFFI_LIB_PATH}/libffi.so.?"
- else
- as_fn_error $? "Could not locate libffi.so.? for bundling in ${LIBFFI_LIB_PATH}" "$LINENO" 5
- fi
- else
- # If we don't have an explicit path, look in a few obvious places
- if test "x${OPENJDK_TARGET_CPU}" = "xx86"; then
- if test -e ${SYSROOT}/usr/lib/libffi.so.? ; then
- LIBFFI_LIB_FILE="${SYSROOT}/usr/lib/libffi.so.?"
- elif test -e ${SYSROOT}/usr/lib/i386-linux-gnu/libffi.so.? ; then
- LIBFFI_LIB_FILE="${SYSROOT}/usr/lib/i386-linux-gnu/libffi.so.?"
- else
- as_fn_error $? "Could not locate libffi.so.? for bundling" "$LINENO" 5
- fi
- elif test "x${OPENJDK_TARGET_CPU}" = "xx86_64"; then
- if test -e ${SYSROOT}/usr/lib64/libffi.so.? ; then
- LIBFFI_LIB_FILE="${SYSROOT}/usr/lib64/libffi.so.?"
- elif test -e ${SYSROOT}/usr/lib/x86_64-linux-gnu/libffi.so.? ; then
- LIBFFI_LIB_FILE="${SYSROOT}/usr/lib/x86_64-linux-gnu/libffi.so.?"
- else
- as_fn_error $? "Could not locate libffi.so.? for bundling" "$LINENO" 5
- fi
- else
- # Fallback on the default /usr/lib dir
- if test -e ${SYSROOT}/usr/lib/libffi.so.? ; then
- LIBFFI_LIB_FILE="${SYSROOT}/usr/lib/libffi.so.?"
- else
- as_fn_error $? "Could not locate libffi.so.? for bundling" "$LINENO" 5
- fi
- fi
- fi
- # Make sure the wildcard is evaluated
- LIBFFI_LIB_FILE="$(ls ${LIBFFI_LIB_FILE})"
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${LIBFFI_LIB_FILE}" >&5
-$as_echo "${LIBFFI_LIB_FILE}" >&6; }
- fi
- fi
-
-
-
-
-
-
-
-
-# Check whether --with-libjpeg was given.
-if test "${with_libjpeg+set}" = set; then :
- withval=$with_libjpeg;
-fi
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for which libjpeg to use" >&5
-$as_echo_n "checking for which libjpeg to use... " >&6; }
- # default is bundled
- DEFAULT_LIBJPEG=bundled
- # if user didn't specify, use DEFAULT_LIBJPEG
- if test "x${with_libjpeg}" = "x"; then
- with_libjpeg=${DEFAULT_LIBJPEG}
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_libjpeg}" >&5
-$as_echo "${with_libjpeg}" >&6; }
-
- if test "x${with_libjpeg}" = "xbundled"; then
- USE_EXTERNAL_LIBJPEG=false
- elif test "x${with_libjpeg}" = "xsystem"; then
- ac_fn_cxx_check_header_mongrel "$LINENO" "jpeglib.h" "ac_cv_header_jpeglib_h" "$ac_includes_default"
-if test "x$ac_cv_header_jpeglib_h" = xyes; then :
-
-else
- as_fn_error $? "--with-libjpeg=system specified, but jpeglib.h not found!" "$LINENO" 5
-fi
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for jpeg_CreateDecompress in -ljpeg" >&5
-$as_echo_n "checking for jpeg_CreateDecompress in -ljpeg... " >&6; }
-if ${ac_cv_lib_jpeg_jpeg_CreateDecompress+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-ljpeg $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char jpeg_CreateDecompress ();
-int
-main ()
-{
-return jpeg_CreateDecompress ();
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_cxx_try_link "$LINENO"; then :
- ac_cv_lib_jpeg_jpeg_CreateDecompress=yes
-else
- ac_cv_lib_jpeg_jpeg_CreateDecompress=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_jpeg_jpeg_CreateDecompress" >&5
-$as_echo "$ac_cv_lib_jpeg_jpeg_CreateDecompress" >&6; }
-if test "x$ac_cv_lib_jpeg_jpeg_CreateDecompress" = xyes; then :
- cat >>confdefs.h <<_ACEOF
-#define HAVE_LIBJPEG 1
-_ACEOF
-
- LIBS="-ljpeg $LIBS"
-
-else
- as_fn_error $? "--with-libjpeg=system specified, but no libjpeg found" "$LINENO" 5
-fi
-
-
- USE_EXTERNAL_LIBJPEG=true
- else
- as_fn_error $? "Invalid use of --with-libjpeg: ${with_libjpeg}, use 'system' or 'bundled'" "$LINENO" 5
- fi
-
-
-
-
-
-# Check whether --with-giflib was given.
-if test "${with_giflib+set}" = set; then :
- withval=$with_giflib;
-fi
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for which giflib to use" >&5
-$as_echo_n "checking for which giflib to use... " >&6; }
- # default is bundled
- DEFAULT_GIFLIB=bundled
- # if user didn't specify, use DEFAULT_GIFLIB
- if test "x${with_giflib}" = "x"; then
- with_giflib=${DEFAULT_GIFLIB}
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_giflib}" >&5
-$as_echo "${with_giflib}" >&6; }
-
- if test "x${with_giflib}" = "xbundled"; then
- USE_EXTERNAL_LIBGIF=false
- elif test "x${with_giflib}" = "xsystem"; then
- ac_fn_cxx_check_header_mongrel "$LINENO" "gif_lib.h" "ac_cv_header_gif_lib_h" "$ac_includes_default"
-if test "x$ac_cv_header_gif_lib_h" = xyes; then :
-
-else
- as_fn_error $? "--with-giflib=system specified, but gif_lib.h not found!" "$LINENO" 5
-fi
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for DGifGetCode in -lgif" >&5
-$as_echo_n "checking for DGifGetCode in -lgif... " >&6; }
-if ${ac_cv_lib_gif_DGifGetCode+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lgif $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char DGifGetCode ();
-int
-main ()
-{
-return DGifGetCode ();
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_cxx_try_link "$LINENO"; then :
- ac_cv_lib_gif_DGifGetCode=yes
-else
- ac_cv_lib_gif_DGifGetCode=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_gif_DGifGetCode" >&5
-$as_echo "$ac_cv_lib_gif_DGifGetCode" >&6; }
-if test "x$ac_cv_lib_gif_DGifGetCode" = xyes; then :
- cat >>confdefs.h <<_ACEOF
-#define HAVE_LIBGIF 1
-_ACEOF
-
- LIBS="-lgif $LIBS"
-
-else
- as_fn_error $? "--with-giflib=system specified, but no giflib found!" "$LINENO" 5
-fi
-
-
- USE_EXTERNAL_LIBGIF=true
- else
- as_fn_error $? "Invalid value of --with-giflib: ${with_giflib}, use 'system' or 'bundled'" "$LINENO" 5
- fi
-
-
-
-
-
-# Check whether --with-libpng was given.
-if test "${with_libpng+set}" = set; then :
- withval=$with_libpng;
-fi
-
-
-
-pkg_failed=no
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for PNG" >&5
-$as_echo_n "checking for PNG... " >&6; }
-
-if test -n "$PNG_CFLAGS"; then
- pkg_cv_PNG_CFLAGS="$PNG_CFLAGS"
- elif test -n "$PKG_CONFIG"; then
- if test -n "$PKG_CONFIG" && \
- { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libpng\""; } >&5
- ($PKG_CONFIG --exists --print-errors "libpng") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; then
- pkg_cv_PNG_CFLAGS=`$PKG_CONFIG --cflags "libpng" 2>/dev/null`
-else
- pkg_failed=yes
-fi
- else
- pkg_failed=untried
-fi
-if test -n "$PNG_LIBS"; then
- pkg_cv_PNG_LIBS="$PNG_LIBS"
- elif test -n "$PKG_CONFIG"; then
- if test -n "$PKG_CONFIG" && \
- { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libpng\""; } >&5
- ($PKG_CONFIG --exists --print-errors "libpng") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; then
- pkg_cv_PNG_LIBS=`$PKG_CONFIG --libs "libpng" 2>/dev/null`
-else
- pkg_failed=yes
-fi
- else
- pkg_failed=untried
-fi
-
-
-
-if test $pkg_failed = yes; then
-
-if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
- _pkg_short_errors_supported=yes
-else
- _pkg_short_errors_supported=no
-fi
- if test $_pkg_short_errors_supported = yes; then
- PNG_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "libpng" 2>&1`
- else
- PNG_PKG_ERRORS=`$PKG_CONFIG --print-errors "libpng" 2>&1`
- fi
- # Put the nasty error message in config.log where it belongs
- echo "$PNG_PKG_ERRORS" >&5
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- LIBPNG_FOUND=no
-elif test $pkg_failed = untried; then
- LIBPNG_FOUND=no
-else
- PNG_CFLAGS=$pkg_cv_PNG_CFLAGS
- PNG_LIBS=$pkg_cv_PNG_LIBS
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
- LIBPNG_FOUND=yes
-fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for which libpng to use" >&5
-$as_echo_n "checking for which libpng to use... " >&6; }
-
- # default is bundled
- DEFAULT_LIBPNG=bundled
- # if user didn't specify, use DEFAULT_LIBPNG
- if test "x${with_libpng}" = "x"; then
- with_libpng=${DEFAULT_LIBPNG}
- fi
-
- if test "x${with_libpng}" = "xbundled"; then
- USE_EXTERNAL_LIBPNG=false
- PNG_CFLAGS=""
- PNG_LIBS=""
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: bundled" >&5
-$as_echo "bundled" >&6; }
- elif test "x${with_libpng}" = "xsystem"; then
- if test "x${LIBPNG_FOUND}" = "xyes"; then
- # PKG_CHECK_MODULES will set PNG_CFLAGS and PNG_LIBS
- USE_EXTERNAL_LIBPNG=true
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: system" >&5
-$as_echo "system" >&6; }
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: system not found" >&5
-$as_echo "system not found" >&6; }
- as_fn_error $? "--with-libpng=system specified, but no libpng found!" "$LINENO" 5
- fi
- else
- as_fn_error $? "Invalid value of --with-libpng: ${with_libpng}, use 'system' or 'bundled'" "$LINENO" 5
- fi
-
-
-
-
-
-
-
-# Check whether --with-zlib was given.
-if test "${with_zlib+set}" = set; then :
- withval=$with_zlib;
-fi
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for compress in -lz" >&5
-$as_echo_n "checking for compress in -lz... " >&6; }
-if ${ac_cv_lib_z_compress+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lz $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char compress ();
-int
-main ()
-{
-return compress ();
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_cxx_try_link "$LINENO"; then :
- ac_cv_lib_z_compress=yes
-else
- ac_cv_lib_z_compress=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_z_compress" >&5
-$as_echo "$ac_cv_lib_z_compress" >&6; }
-if test "x$ac_cv_lib_z_compress" = xyes; then :
- ZLIB_FOUND=yes
-else
- ZLIB_FOUND=no
-fi
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for which zlib to use" >&5
-$as_echo_n "checking for which zlib to use... " >&6; }
-
- DEFAULT_ZLIB=system
- if test "x$OPENJDK_TARGET_OS" = xwindows; then
- # On windows default is bundled...on others default is system
- DEFAULT_ZLIB=bundled
- fi
-
- if test "x${ZLIB_FOUND}" != "xyes"; then
- # If we don't find any system...set default to bundled
- DEFAULT_ZLIB=bundled
- fi
-
- # If user didn't specify, use DEFAULT_ZLIB
- if test "x${with_zlib}" = "x"; then
- with_zlib=${DEFAULT_ZLIB}
- fi
-
- if test "x${with_zlib}" = "xbundled"; then
- USE_EXTERNAL_LIBZ=false
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: bundled" >&5
-$as_echo "bundled" >&6; }
- elif test "x${with_zlib}" = "xsystem"; then
- if test "x${ZLIB_FOUND}" = "xyes"; then
- USE_EXTERNAL_LIBZ=true
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: system" >&5
-$as_echo "system" >&6; }
-
- if test "x$USE_EXTERNAL_LIBPNG" != "xtrue"; then
- # If we use bundled libpng, we must verify that we have a proper zlib.
- # For instance zlib-ng has had issues with inflateValidate().
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for system zlib functionality" >&5
-$as_echo_n "checking for system zlib functionality... " >&6; }
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include "zlib.h"
-int
-main ()
-{
-
- #if ZLIB_VERNUM >= 0x1281
- inflateValidate(NULL, 0);
- #endif
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_cxx_try_compile "$LINENO"; then :
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
-$as_echo "ok" >&6; }
-else
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not ok" >&5
-$as_echo "not ok" >&6; }
- as_fn_error $? "System zlib not working correctly" "$LINENO" 5
-
-
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- fi
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: system not found" >&5
-$as_echo "system not found" >&6; }
- as_fn_error $? "--with-zlib=system specified, but no zlib found!" "$LINENO" 5
- fi
- else
- as_fn_error $? "Invalid value for --with-zlib: ${with_zlib}, use 'system' or 'bundled'" "$LINENO" 5
- fi
-
-
-
-
-
-# Check whether --with-lcms was given.
-if test "${with_lcms+set}" = set; then :
- withval=$with_lcms;
-fi
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for which lcms to use" >&5
-$as_echo_n "checking for which lcms to use... " >&6; }
-
- DEFAULT_LCMS=bundled
- # If user didn't specify, use DEFAULT_LCMS
- if test "x${with_lcms}" = "x"; then
- with_lcms=${DEFAULT_LCMS}
- fi
-
- if test "x${with_lcms}" = "xbundled"; then
- USE_EXTERNAL_LCMS=false
- LCMS_CFLAGS=""
- LCMS_LIBS=""
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: bundled" >&5
-$as_echo "bundled" >&6; }
- elif test "x${with_lcms}" = "xsystem"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: system" >&5
-$as_echo "system" >&6; }
-
-pkg_failed=no
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for LCMS" >&5
-$as_echo_n "checking for LCMS... " >&6; }
-
-if test -n "$LCMS_CFLAGS"; then
- pkg_cv_LCMS_CFLAGS="$LCMS_CFLAGS"
- elif test -n "$PKG_CONFIG"; then
- if test -n "$PKG_CONFIG" && \
- { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"lcms2\""; } >&5
- ($PKG_CONFIG --exists --print-errors "lcms2") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; then
- pkg_cv_LCMS_CFLAGS=`$PKG_CONFIG --cflags "lcms2" 2>/dev/null`
-else
- pkg_failed=yes
-fi
- else
- pkg_failed=untried
-fi
-if test -n "$LCMS_LIBS"; then
- pkg_cv_LCMS_LIBS="$LCMS_LIBS"
- elif test -n "$PKG_CONFIG"; then
- if test -n "$PKG_CONFIG" && \
- { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"lcms2\""; } >&5
- ($PKG_CONFIG --exists --print-errors "lcms2") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; then
- pkg_cv_LCMS_LIBS=`$PKG_CONFIG --libs "lcms2" 2>/dev/null`
-else
- pkg_failed=yes
-fi
- else
- pkg_failed=untried
-fi
-
-
-
-if test $pkg_failed = yes; then
-
-if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
- _pkg_short_errors_supported=yes
-else
- _pkg_short_errors_supported=no
-fi
- if test $_pkg_short_errors_supported = yes; then
- LCMS_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "lcms2" 2>&1`
- else
- LCMS_PKG_ERRORS=`$PKG_CONFIG --print-errors "lcms2" 2>&1`
- fi
- # Put the nasty error message in config.log where it belongs
- echo "$LCMS_PKG_ERRORS" >&5
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- LCMS_FOUND=no
-elif test $pkg_failed = untried; then
- LCMS_FOUND=no
-else
- LCMS_CFLAGS=$pkg_cv_LCMS_CFLAGS
- LCMS_LIBS=$pkg_cv_LCMS_LIBS
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
- LCMS_FOUND=yes
-fi
- if test "x${LCMS_FOUND}" = "xyes"; then
- # PKG_CHECK_MODULES will set LCMS_CFLAGS and LCMS_LIBS
- USE_EXTERNAL_LCMS=true
- else
- as_fn_error $? "--with-lcms=system specified, but no lcms found!" "$LINENO" 5
- fi
- else
- as_fn_error $? "Invalid value for --with-lcms: ${with_lcms}, use 'system' or 'bundled'" "$LINENO" 5
- fi
-
-
-
-
-
-
-
-
-
-
-
-
-
- # Setup libm (the maths library)
- if test "x$OPENJDK_TARGET_OS" != "xwindows"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for cos in -lm" >&5
-$as_echo_n "checking for cos in -lm... " >&6; }
-if ${ac_cv_lib_m_cos+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lm $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char cos ();
-int
-main ()
-{
-return cos ();
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_cxx_try_link "$LINENO"; then :
- ac_cv_lib_m_cos=yes
-else
- ac_cv_lib_m_cos=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_cos" >&5
-$as_echo "$ac_cv_lib_m_cos" >&6; }
-if test "x$ac_cv_lib_m_cos" = xyes; then :
- cat >>confdefs.h <<_ACEOF
-#define HAVE_LIBM 1
-_ACEOF
-
- LIBS="-lm $LIBS"
-
-else
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: Maths library was not found" >&5
-$as_echo "$as_me: Maths library was not found" >&6;}
-
-fi
-
- LIBM="-lm"
- else
- LIBM=""
- fi
-
-
- # Setup libdl (for dynamic library loading)
- save_LIBS="$LIBS"
- LIBS=""
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
-$as_echo_n "checking for dlopen in -ldl... " >&6; }
-if ${ac_cv_lib_dl_dlopen+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldl $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dlopen ();
-int
-main ()
-{
-return dlopen ();
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_cxx_try_link "$LINENO"; then :
- ac_cv_lib_dl_dlopen=yes
-else
- ac_cv_lib_dl_dlopen=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
-$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
-if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
- cat >>confdefs.h <<_ACEOF
-#define HAVE_LIBDL 1
-_ACEOF
-
- LIBS="-ldl $LIBS"
-
-fi
-
- LIBDL="$LIBS"
-
- LIBS="$save_LIBS"
-
- # Deprecated libraries, keep the flags for backwards compatibility
- if test "x$OPENJDK_TARGET_OS" = "xwindows"; then
-
-
-# Check whether --with-dxsdk was given.
-if test "${with_dxsdk+set}" = set; then :
- withval=$with_dxsdk; { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Option --with-dxsdk is deprecated and will be ignored." >&5
-$as_echo "$as_me: WARNING: Option --with-dxsdk is deprecated and will be ignored." >&2;}
-fi
-
-
-
-
-# Check whether --with-dxsdk-lib was given.
-if test "${with_dxsdk_lib+set}" = set; then :
- withval=$with_dxsdk_lib; { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Option --with-dxsdk-lib is deprecated and will be ignored." >&5
-$as_echo "$as_me: WARNING: Option --with-dxsdk-lib is deprecated and will be ignored." >&2;}
-fi
-
-
-
-
-# Check whether --with-dxsdk-include was given.
-if test "${with_dxsdk_include+set}" = set; then :
- withval=$with_dxsdk_include; { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Option --with-dxsdk-include is deprecated and will be ignored." >&5
-$as_echo "$as_me: WARNING: Option --with-dxsdk-include is deprecated and will be ignored." >&2;}
-fi
-
-
- fi
-
- # Control if libzip can use mmap. Available for purposes of overriding.
- LIBZIP_CAN_USE_MMAP=true
-
-
-
- if test "$OPENJDK_TARGET_OS" = "solaris" && test "x$BUILD_GTEST" = "xtrue"; then
- # Find the root of the Solaris Studio installation from the compiler path
- SOLARIS_STUDIO_DIR="$(dirname $CC)/.."
- STLPORT_LIB="$SOLARIS_STUDIO_DIR/lib/stlport4$OPENJDK_TARGET_CPU_ISADIR/libstlport.so.1"
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for libstlport.so.1" >&5
-$as_echo_n "checking for libstlport.so.1... " >&6; }
- if ! test -f "$STLPORT_LIB" && test "x$OPENJDK_TARGET_CPU_ISADIR" = "x/sparcv9"; then
- # SS12u3 has libstlport under 'stlport4/v9' instead of 'stlport4/sparcv9'
- STLPORT_LIB="$SOLARIS_STUDIO_DIR/lib/stlport4/v9/libstlport.so.1"
- fi
- if test -f "$STLPORT_LIB"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes, $STLPORT_LIB" >&5
-$as_echo "yes, $STLPORT_LIB" >&6; }
-
- # Only process if variable expands to non-empty
-
- if test "x$STLPORT_LIB" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- path="$STLPORT_LIB"
- new_path=`$CYGPATH -u "$path"`
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file precense.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of STLPORT_LIB, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of STLPORT_LIB, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Cannot locate the the path of STLPORT_LIB" "$LINENO" 5
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-style (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
-
- if test "x$path" != "x$new_path"; then
- STLPORT_LIB="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting STLPORT_LIB to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting STLPORT_LIB to \"$new_path\"" >&6;}
- fi
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- path="$STLPORT_LIB"
- has_colon=`$ECHO $path | $GREP ^.:`
- new_path="$path"
- if test "x$has_colon" = x; then
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $path`
- fi
-
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- if test "x$path" != "x$new_path"; then
- STLPORT_LIB="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting STLPORT_LIB to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting STLPORT_LIB to \"$new_path\"" >&6;}
- fi
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
-
- else
- # We're on a unix platform. Hooray! :)
- path="$STLPORT_LIB"
- has_space=`$ECHO "$path" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of STLPORT_LIB, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of STLPORT_LIB, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
- fi
-
- # Use eval to expand a potential ~
- eval path="$path"
- if test ! -f "$path" && test ! -d "$path"; then
- as_fn_error $? "The path of STLPORT_LIB, which resolves as \"$path\", is not found." "$LINENO" 5
- fi
-
- if test -d "$path"; then
- STLPORT_LIB="`cd "$path"; $THEPWDCMD -L`"
- else
- dir="`$DIRNAME "$path"`"
- base="`$BASENAME "$path"`"
- STLPORT_LIB="`cd "$dir"; $THEPWDCMD -L`/$base"
- fi
- fi
- fi
-
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, not found at $STLPORT_LIB" >&5
-$as_echo "no, not found at $STLPORT_LIB" >&6; }
- as_fn_error $? "Failed to find libstlport.so.1, cannot build Hotspot gtests" "$LINENO" 5
- fi
-
- fi
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-# Hotspot setup depends on lib checks.
-
-
- # The user can in some cases supply additional jvm features. For the custom
- # variant, this defines the entire variant.
-
-# Check whether --with-jvm-features was given.
-if test "${with_jvm_features+set}" = set; then :
- withval=$with_jvm_features;
-fi
-
- if test "x$with_jvm_features" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking additional JVM features" >&5
-$as_echo_n "checking additional JVM features... " >&6; }
- JVM_FEATURES=`$ECHO $with_jvm_features | $SED -e 's/,/ /g'`
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $JVM_FEATURES" >&5
-$as_echo "$JVM_FEATURES" >&6; }
- fi
-
- # Override hotspot cpu definitions for ARM platforms
- if test "x$OPENJDK_TARGET_CPU" = xarm; then
- HOTSPOT_TARGET_CPU=arm_32
- HOTSPOT_TARGET_CPU_DEFINE="ARM32"
- JVM_LDFLAGS="$JVM_LDFLAGS -fsigned-char"
- JVM_CFLAGS="$JVM_CFLAGS -DARM -fsigned-char"
- elif test "x$OPENJDK_TARGET_CPU" = xaarch64 && test "x$HOTSPOT_TARGET_CPU_PORT" = xarm64; then
- HOTSPOT_TARGET_CPU=arm_64
- HOTSPOT_TARGET_CPU_ARCH=arm
- JVM_LDFLAGS="$JVM_LDFLAGS -fsigned-char"
- JVM_CFLAGS="$JVM_CFLAGS -DARM -fsigned-char"
- fi
-
- # Verify that dependencies are met for explicitly set features.
- if [[ " $JVM_FEATURES " =~ " jvmti " ]] && ! [[ " $JVM_FEATURES " =~ " services " ]] ; then
- as_fn_error $? "Specified JVM feature 'jvmti' requires feature 'services'" "$LINENO" 5
- fi
-
- if [[ " $JVM_FEATURES " =~ " management " ]] && ! [[ " $JVM_FEATURES " =~ " nmt " ]] ; then
- as_fn_error $? "Specified JVM feature 'management' requires feature 'nmt'" "$LINENO" 5
- fi
-
- if [[ " $JVM_FEATURES " =~ " jvmci " ]] && ! ( [[ " $JVM_FEATURES " =~ " compiler1 " ]] || [[ " $JVM_FEATURES " =~ " compiler2 " ]] ); then
- as_fn_error $? "Specified JVM feature 'jvmci' requires feature 'compiler2' or 'compiler1'" "$LINENO" 5
- fi
-
- if [[ " $JVM_FEATURES " =~ " compiler2 " ]] && ! [[ " $JVM_FEATURES " =~ " all-gcs " ]] ; then
- as_fn_error $? "Specified JVM feature 'compiler2' requires feature 'all-gcs'" "$LINENO" 5
- fi
-
- if [[ " $JVM_FEATURES " =~ " vm-structs " ]] && ! [[ " $JVM_FEATURES " =~ " all-gcs " ]] ; then
- as_fn_error $? "Specified JVM feature 'vm-structs' requires feature 'all-gcs'" "$LINENO" 5
- fi
-
- # Turn on additional features based on other parts of configure
- if test "x$INCLUDE_DTRACE" = "xtrue"; then
- JVM_FEATURES="$JVM_FEATURES dtrace"
- else
- if [[ " $JVM_FEATURES " =~ " dtrace " ]] ; then
- as_fn_error $? "To enable dtrace, you must use --enable-dtrace" "$LINENO" 5
- fi
- fi
-
- if test "x$STATIC_BUILD" = "xtrue"; then
- JVM_FEATURES="$JVM_FEATURES static-build"
- else
- if [[ " $JVM_FEATURES " =~ " static-build " ]] ; then
- as_fn_error $? "To enable static-build, you must use --enable-static-build" "$LINENO" 5
- fi
- fi
-
- if ! [[ " $JVM_VARIANTS " =~ " zero " ]] ; then
- if [[ " $JVM_FEATURES " =~ " zero " ]] ; then
- as_fn_error $? "To enable zero, you must use --with-jvm-variants=zero" "$LINENO" 5
- fi
- fi
-
- # Only enable jvmci on x86_64, sparcv9 and aarch64.
- if test "x$OPENJDK_TARGET_CPU" = "xx86_64" || \
- test "x$OPENJDK_TARGET_CPU" = "xsparcv9" || \
- test "x$OPENJDK_TARGET_CPU" = "xaarch64" ; then
- JVM_FEATURES_jvmci="jvmci"
- else
- JVM_FEATURES_jvmci=""
- fi
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if jdk.internal.vm.compiler should be built" >&5
-$as_echo_n "checking if jdk.internal.vm.compiler should be built... " >&6; }
- if [[ " $JVM_FEATURES " =~ " graal " ]] ; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes, forced" >&5
-$as_echo "yes, forced" >&6; }
- if test "x$JVM_FEATURES_jvmci" != "xjvmci" ; then
- as_fn_error $? "Specified JVM feature 'graal' requires feature 'jvmci'" "$LINENO" 5
- fi
- INCLUDE_GRAAL="true"
- else
- # By default enable graal build on linux-x64 or where AOT is available.
- # graal build requires jvmci.
- if test "x$JVM_FEATURES_jvmci" = "xjvmci" && \
- (test "x$OPENJDK_TARGET_CPU" = "xx86_64" && \
- test "x$OPENJDK_TARGET_OS" = "xlinux" || \
- test "x$ENABLE_AOT" = "xtrue") ; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
- JVM_FEATURES_graal="graal"
- INCLUDE_GRAAL="true"
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- JVM_FEATURES_graal=""
- INCLUDE_GRAAL="false"
- fi
- fi
-
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if aot should be enabled" >&5
-$as_echo_n "checking if aot should be enabled... " >&6; }
- if test "x$ENABLE_AOT" = "xtrue"; then
- if test "x$enable_aot" = "xyes"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes, forced" >&5
-$as_echo "yes, forced" >&6; }
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
- fi
- JVM_FEATURES_aot="aot"
- else
- if test "x$enable_aot" = "xno"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, forced" >&5
-$as_echo "no, forced" >&6; }
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- fi
- JVM_FEATURES_aot=""
- fi
-
- if test "x$OPENJDK_TARGET_CPU" = xarm ; then
- # Default to use link time optimizations on minimal on arm
- JVM_FEATURES_link_time_opt="link-time-opt"
- else
- JVM_FEATURES_link_time_opt=""
- fi
-
- # All variants but minimal (and custom) get these features
- NON_MINIMAL_FEATURES="$NON_MINIMAL_FEATURES jvmti vm-structs jni-check services management all-gcs nmt"
- if test "x$ENABLE_CDS" = "xtrue"; then
- NON_MINIMAL_FEATURES="$NON_MINIMAL_FEATURES cds"
- fi
-
- # Enable features depending on variant.
- JVM_FEATURES_server="compiler1 compiler2 $NON_MINIMAL_FEATURES $JVM_FEATURES $JVM_FEATURES_jvmci $JVM_FEATURES_aot $JVM_FEATURES_graal"
- JVM_FEATURES_client="compiler1 $NON_MINIMAL_FEATURES $JVM_FEATURES $JVM_FEATURES_jvmci"
- JVM_FEATURES_core="$NON_MINIMAL_FEATURES $JVM_FEATURES"
- JVM_FEATURES_minimal="compiler1 minimal $JVM_FEATURES $JVM_FEATURES_link_time_opt"
- JVM_FEATURES_zero="zero $NON_MINIMAL_FEATURES $JVM_FEATURES"
- JVM_FEATURES_custom="$JVM_FEATURES"
-
-
-
-
-
-
-
-
- # Used for verification of Makefiles by check-jvm-feature
-
-
- # We don't support --with-jvm-interpreter anymore, use zero instead.
-
-
-# Check whether --with-jvm-interpreter was given.
-if test "${with_jvm_interpreter+set}" = set; then :
- withval=$with_jvm_interpreter; { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Option --with-jvm-interpreter is deprecated and will be ignored." >&5
-$as_echo "$as_me: WARNING: Option --with-jvm-interpreter is deprecated and will be ignored." >&2;}
-fi
-
-
-
-
-###############################################################################
-#
-# We need to do some final tweaking, when everything else is done.
-#
-###############################################################################
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if elliptic curve crypto implementation is present" >&5
-$as_echo_n "checking if elliptic curve crypto implementation is present... " >&6; }
-
- if test -d "${TOPDIR}/src/jdk.crypto.ec/share/native/libsunec/impl"; then
- ENABLE_INTREE_EC=true
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
- else
- ENABLE_INTREE_EC=false
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- fi
-
-
-
-
- # Check whether --enable-jtreg-failure-handler was given.
-if test "${enable_jtreg_failure_handler+set}" = set; then :
- enableval=$enable_jtreg_failure_handler;
-fi
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if jtreg failure handler should be built" >&5
-$as_echo_n "checking if jtreg failure handler should be built... " >&6; }
-
- if test "x$enable_jtreg_failure_handler" = "xyes"; then
- if test "x$JT_HOME" = "x"; then
- as_fn_error $? "Cannot enable jtreg failure handler without jtreg." "$LINENO" 5
- else
- BUILD_FAILURE_HANDLER=true
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes, forced" >&5
-$as_echo "yes, forced" >&6; }
- fi
- elif test "x$enable_jtreg_failure_handler" = "xno"; then
- BUILD_FAILURE_HANDLER=false
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, forced" >&5
-$as_echo "no, forced" >&6; }
- elif test "x$enable_jtreg_failure_handler" = "xauto" \
- || test "x$enable_jtreg_failure_handler" = "x"; then
- if test "x$JT_HOME" = "x"; then
- BUILD_FAILURE_HANDLER=false
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, missing jtreg" >&5
-$as_echo "no, missing jtreg" >&6; }
- else
- BUILD_FAILURE_HANDLER=true
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes, jtreg present" >&5
-$as_echo "yes, jtreg present" >&6; }
- fi
- else
- as_fn_error $? "Invalid value for --enable-jtreg-failure-handler: $enable_jtreg_failure_handler" "$LINENO" 5
- fi
-
-
-
-
- # Check whether --enable-generate-classlist was given.
-if test "${enable_generate_classlist+set}" = set; then :
- enableval=$enable_generate_classlist;
-fi
-
-
- # Check if it's likely that it's possible to generate the classlist. Depending
- # on exact jvm configuration it could be possible anyway.
- if test "x$ENABLE_CDS" = "xtrue" && ( [[ " $JVM_VARIANTS " =~ " server " ]] || [[ " $JVM_VARIANTS " =~ " client " ]] ); then
- ENABLE_GENERATE_CLASSLIST_POSSIBLE="true"
- else
- ENABLE_GENERATE_CLASSLIST_POSSIBLE="false"
- fi
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if the CDS classlist generation should be enabled" >&5
-$as_echo_n "checking if the CDS classlist generation should be enabled... " >&6; }
- if test "x$enable_generate_classlist" = "xyes"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes, forced" >&5
-$as_echo "yes, forced" >&6; }
- ENABLE_GENERATE_CLASSLIST="true"
- if test "x$ENABLE_GENERATE_CLASSLIST_POSSIBLE" = "xfalse"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Generation of classlist might not be possible with JVM Variants $JVM_VARIANTS and enable-cds=$ENABLE_CDS" >&5
-$as_echo "$as_me: WARNING: Generation of classlist might not be possible with JVM Variants $JVM_VARIANTS and enable-cds=$ENABLE_CDS" >&2;}
- fi
- elif test "x$enable_generate_classlist" = "xno"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, forced" >&5
-$as_echo "no, forced" >&6; }
- ENABLE_GENERATE_CLASSLIST="false"
- elif test "x$enable_generate_classlist" = "x"; then
- if test "x$ENABLE_GENERATE_CLASSLIST_POSSIBLE" = "xtrue"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
- ENABLE_GENERATE_CLASSLIST="true"
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- ENABLE_GENERATE_CLASSLIST="false"
- fi
- else
- as_fn_error $? "Invalid value for --enable-generate-classlist: $enable_generate_classlist" "$LINENO" 5
- fi
-
-
-
-
-###############################################################################
-#
-# Configure parts of the build that only affect the build performance,
-# not the result.
-#
-###############################################################################
-
-
- # How many cores do we have on this build system?
-
-# Check whether --with-num-cores was given.
-if test "${with_num_cores+set}" = set; then :
- withval=$with_num_cores;
-fi
-
- if test "x$with_num_cores" = x; then
- # The number of cores were not specified, try to probe them.
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for number of cores" >&5
-$as_echo_n "checking for number of cores... " >&6; }
- NUM_CORES=1
- FOUND_CORES=no
-
- if test -f /proc/cpuinfo; then
- # Looks like a Linux (or cygwin) system
- NUM_CORES=`cat /proc/cpuinfo | grep -c processor`
- FOUND_CORES=yes
- elif test -x /usr/sbin/psrinfo; then
- # Looks like a Solaris system
- NUM_CORES=`LC_MESSAGES=C /usr/sbin/psrinfo -v | grep -c on-line`
- FOUND_CORES=yes
- elif test -x /usr/sbin/sysctl; then
- # Looks like a MacOSX system
- NUM_CORES=`/usr/sbin/sysctl -n hw.ncpu`
- FOUND_CORES=yes
- elif test "x$OPENJDK_BUILD_OS" = xaix ; then
- NUM_CORES=`/usr/sbin/prtconf | grep "^Number Of Processors" | awk '{ print $4 }'`
- FOUND_CORES=yes
- elif test -n "$NUMBER_OF_PROCESSORS"; then
- # On windows, look in the env
- NUM_CORES=$NUMBER_OF_PROCESSORS
- FOUND_CORES=yes
- fi
-
- if test "x$FOUND_CORES" = xyes; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NUM_CORES" >&5
-$as_echo "$NUM_CORES" >&6; }
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: could not detect number of cores, defaulting to 1" >&5
-$as_echo "could not detect number of cores, defaulting to 1" >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: This will disable all parallelism from build!" >&5
-$as_echo "$as_me: WARNING: This will disable all parallelism from build!" >&2;}
- fi
-
- else
- NUM_CORES=$with_num_cores
- fi
-
-
-
- # How much memory do we have on this build system?
-
-# Check whether --with-memory-size was given.
-if test "${with_memory_size+set}" = set; then :
- withval=$with_memory_size;
-fi
-
- if test "x$with_memory_size" = x; then
- # The memory size was not specified, try to probe it.
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for memory size" >&5
-$as_echo_n "checking for memory size... " >&6; }
- # Default to 1024 MB
- MEMORY_SIZE=1024
- FOUND_MEM=no
-
- if test -f /proc/meminfo; then
- # Looks like a Linux (or cygwin) system
- MEMORY_SIZE=`cat /proc/meminfo | grep MemTotal | awk '{print $2}'`
- MEMORY_SIZE=`expr $MEMORY_SIZE / 1024`
- FOUND_MEM=yes
- elif test -x /usr/sbin/prtconf; then
- # Looks like a Solaris or AIX system
- MEMORY_SIZE=`/usr/sbin/prtconf 2> /dev/null | grep "^Memory [Ss]ize" | awk '{ print $3 }'`
- FOUND_MEM=yes
- elif test -x /usr/sbin/sysctl; then
- # Looks like a MacOSX system
- MEMORY_SIZE=`/usr/sbin/sysctl -n hw.memsize`
- MEMORY_SIZE=`expr $MEMORY_SIZE / 1024 / 1024`
- FOUND_MEM=yes
- elif test "x$OPENJDK_BUILD_OS" = xwindows; then
- # Windows, but without cygwin
- MEMORY_SIZE=`wmic computersystem get totalphysicalmemory -value | grep = | cut -d "=" -f 2-`
- MEMORY_SIZE=`expr $MEMORY_SIZE / 1024 / 1024`
- FOUND_MEM=yes
- fi
-
- if test "x$FOUND_MEM" = xyes; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MEMORY_SIZE MB" >&5
-$as_echo "$MEMORY_SIZE MB" >&6; }
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: could not detect memory size, defaulting to $MEMORY_SIZE MB" >&5
-$as_echo "could not detect memory size, defaulting to $MEMORY_SIZE MB" >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: This might seriously impact build performance!" >&5
-$as_echo "$as_me: WARNING: This might seriously impact build performance!" >&2;}
- fi
-
- else
- MEMORY_SIZE=$with_memory_size
- fi
-
-
-
- # Provide a decent default number of parallel jobs for make depending on
- # number of cores, amount of memory and machine architecture.
-
-# Check whether --with-jobs was given.
-if test "${with_jobs+set}" = set; then :
- withval=$with_jobs;
-fi
-
- if test "x$with_jobs" = x; then
- # Number of jobs was not specified, calculate.
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for appropriate number of jobs to run in parallel" >&5
-$as_echo_n "checking for appropriate number of jobs to run in parallel... " >&6; }
- # Approximate memory in GB.
- memory_gb=`expr $MEMORY_SIZE / 1024`
- # Pick the lowest of memory in gb and number of cores.
- if test "$memory_gb" -lt "$NUM_CORES"; then
- JOBS="$memory_gb"
- else
- JOBS="$NUM_CORES"
- fi
- if test "$JOBS" -eq "0"; then
- JOBS=1
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $JOBS" >&5
-$as_echo "$JOBS" >&6; }
- else
- JOBS=$with_jobs
- fi
-
-
-
- # The number of test jobs will be chosen automatically if TEST_JOBS is 0
-
-# Check whether --with-test-jobs was given.
-if test "${with_test_jobs+set}" = set; then :
- withval=$with_test_jobs;
-fi
-
- if test "x$with_test_jobs" = x; then
- TEST_JOBS=0
- else
- TEST_JOBS=$with_test_jobs
- fi
-
-
-
-# Setup arguments for the boot jdk (after cores and memory have been setup)
-
- ##############################################################################
- #
- # Specify jvm options for anything that is run with the Boot JDK.
- # Not all JVM:s accept the same arguments on the command line.
- #
-
-# Check whether --with-boot-jdk-jvmargs was given.
-if test "${with_boot_jdk_jvmargs+set}" = set; then :
- withval=$with_boot_jdk_jvmargs;
-fi
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking flags for boot jdk java command " >&5
-$as_echo_n "checking flags for boot jdk java command ... " >&6; }
-
- # Force en-US environment
-
- $ECHO "Check if jvm arg is ok: -Duser.language=en -Duser.country=US" >&5
- $ECHO "Command: $JAVA -Duser.language=en -Duser.country=US -version" >&5
- OUTPUT=`$JAVA -Duser.language=en -Duser.country=US -version 2>&1`
- FOUND_WARN=`$ECHO "$OUTPUT" | $GREP -i warn`
- FOUND_VERSION=`$ECHO $OUTPUT | $GREP " version \""`
- if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
- boot_jdk_jvmargs="$boot_jdk_jvmargs -Duser.language=en -Duser.country=US"
- JVM_ARG_OK=true
- else
- $ECHO "Arg failed:" >&5
- $ECHO "$OUTPUT" >&5
- JVM_ARG_OK=false
- fi
-
-
- if test "x$BOOTJDK_USE_LOCAL_CDS" = xtrue; then
- # Use our own CDS archive
-
- $ECHO "Check if jvm arg is ok: $boot_jdk_cds_args -Xshare:auto" >&5
- $ECHO "Command: $JAVA $boot_jdk_cds_args -Xshare:auto -version" >&5
- OUTPUT=`$JAVA $boot_jdk_cds_args -Xshare:auto -version 2>&1`
- FOUND_WARN=`$ECHO "$OUTPUT" | $GREP -i warn`
- FOUND_VERSION=`$ECHO $OUTPUT | $GREP " version \""`
- if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
- boot_jdk_jvmargs="$boot_jdk_jvmargs $boot_jdk_cds_args -Xshare:auto"
- JVM_ARG_OK=true
- else
- $ECHO "Arg failed:" >&5
- $ECHO "$OUTPUT" >&5
- JVM_ARG_OK=false
- fi
-
- else
- # Otherwise optimistically use the system-wide one, if one is present
-
- $ECHO "Check if jvm arg is ok: -Xshare:auto" >&5
- $ECHO "Command: $JAVA -Xshare:auto -version" >&5
- OUTPUT=`$JAVA -Xshare:auto -version 2>&1`
- FOUND_WARN=`$ECHO "$OUTPUT" | $GREP -i warn`
- FOUND_VERSION=`$ECHO $OUTPUT | $GREP " version \""`
- if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
- boot_jdk_jvmargs="$boot_jdk_jvmargs -Xshare:auto"
- JVM_ARG_OK=true
- else
- $ECHO "Arg failed:" >&5
- $ECHO "$OUTPUT" >&5
- JVM_ARG_OK=false
- fi
-
- fi
-
- # Apply user provided options.
-
- $ECHO "Check if jvm arg is ok: $with_boot_jdk_jvmargs" >&5
- $ECHO "Command: $JAVA $with_boot_jdk_jvmargs -version" >&5
- OUTPUT=`$JAVA $with_boot_jdk_jvmargs -version 2>&1`
- FOUND_WARN=`$ECHO "$OUTPUT" | $GREP -i warn`
- FOUND_VERSION=`$ECHO $OUTPUT | $GREP " version \""`
- if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
- boot_jdk_jvmargs="$boot_jdk_jvmargs $with_boot_jdk_jvmargs"
- JVM_ARG_OK=true
- else
- $ECHO "Arg failed:" >&5
- $ECHO "$OUTPUT" >&5
- JVM_ARG_OK=false
- fi
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $boot_jdk_jvmargs" >&5
-$as_echo "$boot_jdk_jvmargs" >&6; }
-
- # For now, general JAVA_FLAGS are the same as the boot jdk jvmargs
- JAVA_FLAGS=$boot_jdk_jvmargs
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking flags for boot jdk java command for big workloads" >&5
-$as_echo_n "checking flags for boot jdk java command for big workloads... " >&6; }
-
- # Starting amount of heap memory.
-
- $ECHO "Check if jvm arg is ok: -Xms64M" >&5
- $ECHO "Command: $JAVA -Xms64M -version" >&5
- OUTPUT=`$JAVA -Xms64M -version 2>&1`
- FOUND_WARN=`$ECHO "$OUTPUT" | $GREP -i warn`
- FOUND_VERSION=`$ECHO $OUTPUT | $GREP " version \""`
- if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
- boot_jdk_jvmargs_big="$boot_jdk_jvmargs_big -Xms64M"
- JVM_ARG_OK=true
- else
- $ECHO "Arg failed:" >&5
- $ECHO "$OUTPUT" >&5
- JVM_ARG_OK=false
- fi
-
- BOOTCYCLE_JVM_ARGS_BIG=-Xms64M
-
- # Maximum amount of heap memory and stack size.
- JVM_HEAP_LIMIT_32="1024"
- # Running a 64 bit JVM allows for and requires a bigger heap
- JVM_HEAP_LIMIT_64="1600"
- STACK_SIZE_32=768
- STACK_SIZE_64=1536
- JVM_HEAP_LIMIT_GLOBAL=`expr $MEMORY_SIZE / 2`
- if test "$JVM_HEAP_LIMIT_GLOBAL" -lt "$JVM_HEAP_LIMIT_32"; then
- JVM_HEAP_LIMIT_32=$JVM_HEAP_LIMIT_GLOBAL
- fi
- if test "$JVM_HEAP_LIMIT_GLOBAL" -lt "$JVM_HEAP_LIMIT_64"; then
- JVM_HEAP_LIMIT_64=$JVM_HEAP_LIMIT_GLOBAL
- fi
- if test "$JVM_HEAP_LIMIT_GLOBAL" -lt "512"; then
- JVM_HEAP_LIMIT_32=512
- JVM_HEAP_LIMIT_64=512
- fi
-
- if test "x$BOOT_JDK_BITS" = "x32"; then
- STACK_SIZE=$STACK_SIZE_32
- JVM_MAX_HEAP=$JVM_HEAP_LIMIT_32
- else
- STACK_SIZE=$STACK_SIZE_64
- JVM_MAX_HEAP=$JVM_HEAP_LIMIT_64
- fi
-
- $ECHO "Check if jvm arg is ok: -Xmx${JVM_MAX_HEAP}M" >&5
- $ECHO "Command: $JAVA -Xmx${JVM_MAX_HEAP}M -version" >&5
- OUTPUT=`$JAVA -Xmx${JVM_MAX_HEAP}M -version 2>&1`
- FOUND_WARN=`$ECHO "$OUTPUT" | $GREP -i warn`
- FOUND_VERSION=`$ECHO $OUTPUT | $GREP " version \""`
- if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
- boot_jdk_jvmargs_big="$boot_jdk_jvmargs_big -Xmx${JVM_MAX_HEAP}M"
- JVM_ARG_OK=true
- else
- $ECHO "Arg failed:" >&5
- $ECHO "$OUTPUT" >&5
- JVM_ARG_OK=false
- fi
-
-
- $ECHO "Check if jvm arg is ok: -XX:ThreadStackSize=$STACK_SIZE" >&5
- $ECHO "Command: $JAVA -XX:ThreadStackSize=$STACK_SIZE -version" >&5
- OUTPUT=`$JAVA -XX:ThreadStackSize=$STACK_SIZE -version 2>&1`
- FOUND_WARN=`$ECHO "$OUTPUT" | $GREP -i warn`
- FOUND_VERSION=`$ECHO $OUTPUT | $GREP " version \""`
- if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
- boot_jdk_jvmargs_big="$boot_jdk_jvmargs_big -XX:ThreadStackSize=$STACK_SIZE"
- JVM_ARG_OK=true
- else
- $ECHO "Arg failed:" >&5
- $ECHO "$OUTPUT" >&5
- JVM_ARG_OK=false
- fi
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $boot_jdk_jvmargs_big" >&5
-$as_echo "$boot_jdk_jvmargs_big" >&6; }
-
- JAVA_FLAGS_BIG=$boot_jdk_jvmargs_big
-
-
- if test "x$OPENJDK_TARGET_CPU_BITS" = "x32"; then
- BOOTCYCLE_MAX_HEAP=$JVM_HEAP_LIMIT_32
- BOOTCYCLE_STACK_SIZE=$STACK_SIZE_32
- else
- BOOTCYCLE_MAX_HEAP=$JVM_HEAP_LIMIT_64
- BOOTCYCLE_STACK_SIZE=$STACK_SIZE_64
- fi
- BOOTCYCLE_JVM_ARGS_BIG="$BOOTCYCLE_JVM_ARGS_BIG -Xmx${BOOTCYCLE_MAX_HEAP}M"
- BOOTCYCLE_JVM_ARGS_BIG="$BOOTCYCLE_JVM_ARGS_BIG -XX:ThreadStackSize=$BOOTCYCLE_STACK_SIZE"
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking flags for bootcycle boot jdk java command for big workloads" >&5
-$as_echo_n "checking flags for bootcycle boot jdk java command for big workloads... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BOOTCYCLE_JVM_ARGS_BIG" >&5
-$as_echo "$BOOTCYCLE_JVM_ARGS_BIG" >&6; }
-
-
- # By default, the main javac compilations use big
- JAVA_FLAGS_JAVAC="$JAVA_FLAGS_BIG"
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking flags for boot jdk java command for small workloads" >&5
-$as_echo_n "checking flags for boot jdk java command for small workloads... " >&6; }
-
- # Use serial gc for small short lived tools if possible
-
- $ECHO "Check if jvm arg is ok: -XX:+UseSerialGC" >&5
- $ECHO "Command: $JAVA -XX:+UseSerialGC -version" >&5
- OUTPUT=`$JAVA -XX:+UseSerialGC -version 2>&1`
- FOUND_WARN=`$ECHO "$OUTPUT" | $GREP -i warn`
- FOUND_VERSION=`$ECHO $OUTPUT | $GREP " version \""`
- if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
- boot_jdk_jvmargs_small="$boot_jdk_jvmargs_small -XX:+UseSerialGC"
- JVM_ARG_OK=true
- else
- $ECHO "Arg failed:" >&5
- $ECHO "$OUTPUT" >&5
- JVM_ARG_OK=false
- fi
-
-
- $ECHO "Check if jvm arg is ok: -Xms32M" >&5
- $ECHO "Command: $JAVA -Xms32M -version" >&5
- OUTPUT=`$JAVA -Xms32M -version 2>&1`
- FOUND_WARN=`$ECHO "$OUTPUT" | $GREP -i warn`
- FOUND_VERSION=`$ECHO $OUTPUT | $GREP " version \""`
- if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
- boot_jdk_jvmargs_small="$boot_jdk_jvmargs_small -Xms32M"
- JVM_ARG_OK=true
- else
- $ECHO "Arg failed:" >&5
- $ECHO "$OUTPUT" >&5
- JVM_ARG_OK=false
- fi
-
-
- $ECHO "Check if jvm arg is ok: -Xmx512M" >&5
- $ECHO "Command: $JAVA -Xmx512M -version" >&5
- OUTPUT=`$JAVA -Xmx512M -version 2>&1`
- FOUND_WARN=`$ECHO "$OUTPUT" | $GREP -i warn`
- FOUND_VERSION=`$ECHO $OUTPUT | $GREP " version \""`
- if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
- boot_jdk_jvmargs_small="$boot_jdk_jvmargs_small -Xmx512M"
- JVM_ARG_OK=true
- else
- $ECHO "Arg failed:" >&5
- $ECHO "$OUTPUT" >&5
- JVM_ARG_OK=false
- fi
-
-
- $ECHO "Check if jvm arg is ok: -XX:TieredStopAtLevel=1" >&5
- $ECHO "Command: $JAVA -XX:TieredStopAtLevel=1 -version" >&5
- OUTPUT=`$JAVA -XX:TieredStopAtLevel=1 -version 2>&1`
- FOUND_WARN=`$ECHO "$OUTPUT" | $GREP -i warn`
- FOUND_VERSION=`$ECHO $OUTPUT | $GREP " version \""`
- if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
- boot_jdk_jvmargs_small="$boot_jdk_jvmargs_small -XX:TieredStopAtLevel=1"
- JVM_ARG_OK=true
- else
- $ECHO "Arg failed:" >&5
- $ECHO "$OUTPUT" >&5
- JVM_ARG_OK=false
- fi
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $boot_jdk_jvmargs_small" >&5
-$as_echo "$boot_jdk_jvmargs_small" >&6; }
-
- JAVA_FLAGS_SMALL=$boot_jdk_jvmargs_small
-
-
- JAVA_TOOL_FLAGS_SMALL=""
- for f in $JAVA_FLAGS_SMALL; do
- JAVA_TOOL_FLAGS_SMALL="$JAVA_TOOL_FLAGS_SMALL -J$f"
- done
-
-
-
-# Setup smart javac (after cores and memory have been setup)
-
-
-# Check whether --with-sjavac-server-java was given.
-if test "${with_sjavac_server_java+set}" = set; then :
- withval=$with_sjavac_server_java;
-fi
-
-
- if test "x$with_sjavac_server_java" != x; then
- SJAVAC_SERVER_JAVA="$with_sjavac_server_java"
- FOUND_VERSION=`$SJAVAC_SERVER_JAVA -version 2>&1 | grep " version \""`
- if test "x$FOUND_VERSION" = x; then
- as_fn_error $? "Could not execute server java: $SJAVAC_SERVER_JAVA" "$LINENO" 5
- fi
- else
- SJAVAC_SERVER_JAVA="$JAVA"
- fi
-
-
- if test "$MEMORY_SIZE" -gt "3000"; then
- if "$JAVA" -version 2>&1 | $GREP -q "64-Bit"; then
- JVM_64BIT=true
- fi
- fi
-
- MX_VALUE=`expr $MEMORY_SIZE / 2`
- if test "$JVM_64BIT" = true; then
- # Set ms lower than mx since more than one instance of the server might
- # get launched at the same time before they figure out which instance won.
- MS_VALUE=512
- if test "$MX_VALUE" -gt "2048"; then
- MX_VALUE=2048
- fi
- else
- MS_VALUE=256
- if test "$MX_VALUE" -gt "1500"; then
- MX_VALUE=1500
- fi
- fi
- if test "$MX_VALUE" -lt "512"; then
- MX_VALUE=512
- fi
-
- $ECHO "Check if jvm arg is ok: -Xms${MS_VALUE}M -Xmx${MX_VALUE}M" >&5
- $ECHO "Command: $SJAVAC_SERVER_JAVA -Xms${MS_VALUE}M -Xmx${MX_VALUE}M -version" >&5
- OUTPUT=`$SJAVAC_SERVER_JAVA -Xms${MS_VALUE}M -Xmx${MX_VALUE}M -version 2>&1`
- FOUND_WARN=`$ECHO "$OUTPUT" | $GREP -i warn`
- FOUND_VERSION=`$ECHO $OUTPUT | $GREP " version \""`
- if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
- SJAVAC_SERVER_JAVA_FLAGS="$SJAVAC_SERVER_JAVA_FLAGS -Xms${MS_VALUE}M -Xmx${MX_VALUE}M"
- JVM_ARG_OK=true
- else
- $ECHO "Arg failed:" >&5
- $ECHO "$OUTPUT" >&5
- JVM_ARG_OK=false
- fi
-
-
-
- # Check whether --enable-sjavac was given.
-if test "${enable_sjavac+set}" = set; then :
- enableval=$enable_sjavac; ENABLE_SJAVAC="${enableval}"
-else
- ENABLE_SJAVAC="no"
-fi
-
- if test "x$JVM_ARG_OK" = "xfalse"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Could not set -Xms${MS_VALUE}M -Xmx${MX_VALUE}M, disabling sjavac" >&5
-$as_echo "$as_me: WARNING: Could not set -Xms${MS_VALUE}M -Xmx${MX_VALUE}M, disabling sjavac" >&2;}
- ENABLE_SJAVAC="no"
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to use sjavac" >&5
-$as_echo_n "checking whether to use sjavac... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ENABLE_SJAVAC" >&5
-$as_echo "$ENABLE_SJAVAC" >&6; }
-
-
- # Check whether --enable-javac-server was given.
-if test "${enable_javac_server+set}" = set; then :
- enableval=$enable_javac_server; ENABLE_JAVAC_SERVER="${enableval}"
-else
- ENABLE_JAVAC_SERVER="yes"
-fi
-
- if test "x$JVM_ARG_OK" = "xfalse"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Could not set -Xms${MS_VALUE}M -Xmx${MX_VALUE}M, disabling javac server" >&5
-$as_echo "$as_me: WARNING: Could not set -Xms${MS_VALUE}M -Xmx${MX_VALUE}M, disabling javac server" >&2;}
- ENABLE_JAVAC_SERVER="no"
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to use javac server" >&5
-$as_echo_n "checking whether to use javac server... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ENABLE_JAVAC_SERVER" >&5
-$as_echo "$ENABLE_JAVAC_SERVER" >&6; }
-
-
- if test "x$ENABLE_JAVAC_SERVER" = "xyes" || test "x$ENABLE_SJAVAC" = "xyes"; then
- # When using a server javac, the small client instances do not need much
- # resources.
- JAVA_FLAGS_JAVAC="$JAVA_FLAGS_SMALL"
- fi
-
-
-# Setup use of icecc if requested
-
- # Check whether --enable-icecc was given.
-if test "${enable_icecc+set}" = set; then :
- enableval=$enable_icecc;
-fi
-
-
- if test "x${enable_icecc}" = "xyes"; then
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${ICECC_CMD+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in icecc
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_ICECC_CMD+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $ICECC_CMD in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_ICECC_CMD="$ICECC_CMD" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_ICECC_CMD="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-ICECC_CMD=$ac_cv_path_ICECC_CMD
-if test -n "$ICECC_CMD"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ICECC_CMD" >&5
-$as_echo "$ICECC_CMD" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$ICECC_CMD" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !ICECC_CMD! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!ICECC_CMD!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xICECC_CMD" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of ICECC_CMD from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of ICECC_CMD from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in icecc
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_ICECC_CMD+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $ICECC_CMD in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_ICECC_CMD="$ICECC_CMD" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_ICECC_CMD="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-ICECC_CMD=$ac_cv_path_ICECC_CMD
-if test -n "$ICECC_CMD"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ICECC_CMD" >&5
-$as_echo "$ICECC_CMD" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$ICECC_CMD" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$ICECC_CMD" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool ICECC_CMD= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool ICECC_CMD= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ICECC_CMD" >&5
-$as_echo_n "checking for ICECC_CMD... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$ICECC_CMD"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool ICECC_CMD=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool ICECC_CMD=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_ICECC_CMD+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $ICECC_CMD in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_ICECC_CMD="$ICECC_CMD" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_ICECC_CMD="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-ICECC_CMD=$ac_cv_path_ICECC_CMD
-if test -n "$ICECC_CMD"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ICECC_CMD" >&5
-$as_echo "$ICECC_CMD" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$ICECC_CMD" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool ICECC_CMD=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool ICECC_CMD=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ICECC_CMD" >&5
-$as_echo_n "checking for ICECC_CMD... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool ICECC_CMD=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
- if test "x$ICECC_CMD" = x; then
- as_fn_error $? "Could not find required tool for ICECC_CMD" "$LINENO" 5
- fi
-
-
- old_path="$PATH"
-
- # Look for icecc-create-env in some known places
- PATH="$PATH:/usr/lib/icecc:/usr/lib64/icecc"
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${ICECC_CREATE_ENV+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in icecc-create-env
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_ICECC_CREATE_ENV+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $ICECC_CREATE_ENV in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_ICECC_CREATE_ENV="$ICECC_CREATE_ENV" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_ICECC_CREATE_ENV="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-ICECC_CREATE_ENV=$ac_cv_path_ICECC_CREATE_ENV
-if test -n "$ICECC_CREATE_ENV"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ICECC_CREATE_ENV" >&5
-$as_echo "$ICECC_CREATE_ENV" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$ICECC_CREATE_ENV" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !ICECC_CREATE_ENV! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!ICECC_CREATE_ENV!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xICECC_CREATE_ENV" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of ICECC_CREATE_ENV from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of ICECC_CREATE_ENV from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in icecc-create-env
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_ICECC_CREATE_ENV+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $ICECC_CREATE_ENV in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_ICECC_CREATE_ENV="$ICECC_CREATE_ENV" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_ICECC_CREATE_ENV="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-ICECC_CREATE_ENV=$ac_cv_path_ICECC_CREATE_ENV
-if test -n "$ICECC_CREATE_ENV"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ICECC_CREATE_ENV" >&5
-$as_echo "$ICECC_CREATE_ENV" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$ICECC_CREATE_ENV" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$ICECC_CREATE_ENV" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool ICECC_CREATE_ENV= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool ICECC_CREATE_ENV= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ICECC_CREATE_ENV" >&5
-$as_echo_n "checking for ICECC_CREATE_ENV... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$ICECC_CREATE_ENV"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool ICECC_CREATE_ENV=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool ICECC_CREATE_ENV=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_ICECC_CREATE_ENV+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $ICECC_CREATE_ENV in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_ICECC_CREATE_ENV="$ICECC_CREATE_ENV" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_ICECC_CREATE_ENV="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-ICECC_CREATE_ENV=$ac_cv_path_ICECC_CREATE_ENV
-if test -n "$ICECC_CREATE_ENV"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ICECC_CREATE_ENV" >&5
-$as_echo "$ICECC_CREATE_ENV" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$ICECC_CREATE_ENV" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool ICECC_CREATE_ENV=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool ICECC_CREATE_ENV=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ICECC_CREATE_ENV" >&5
-$as_echo_n "checking for ICECC_CREATE_ENV... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool ICECC_CREATE_ENV=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
- if test "x$ICECC_CREATE_ENV" = x; then
- as_fn_error $? "Could not find required tool for ICECC_CREATE_ENV" "$LINENO" 5
- fi
-
-
- # Use icecc-create-env to create a minimal compilation environment that can
- # be sent to the other hosts in the icecream cluster.
- icecc_create_env_log="${CONFIGURESUPPORT_OUTPUTDIR}/icecc/icecc_create_env.log"
- ${MKDIR} -p ${CONFIGURESUPPORT_OUTPUTDIR}/icecc
- # Older versions of icecc does not have the --gcc parameter
- if ${ICECC_CREATE_ENV} | $GREP -q -e --gcc; then
- icecc_gcc_arg="--gcc"
- fi
- if test "x${TOOLCHAIN_TYPE}" = "xgcc"; then
-
- ( cd ${CONFIGURESUPPORT_OUTPUTDIR}/icecc \
- && ${ICECC_CREATE_ENV} ${icecc_gcc_arg} ${CC} ${CXX} > \
- ${icecc_create_env_log} 2>&1 )
- if test "$?" != "0"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: icecc-create-env output:" >&5
-$as_echo "$as_me: icecc-create-env output:" >&6;}
- cat \
- ${icecc_create_env_log}
- as_fn_error $? "Failed to create icecc compiler environment" "$LINENO" 5
- fi
-
- elif test "x$TOOLCHAIN_TYPE" = "xclang"; then
- # For clang, the icecc compilerwrapper is needed. It usually resides next
- # to icecc-create-env.
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${ICECC_WRAPPER+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in compilerwrapper
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_ICECC_WRAPPER+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $ICECC_WRAPPER in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_ICECC_WRAPPER="$ICECC_WRAPPER" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_ICECC_WRAPPER="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-ICECC_WRAPPER=$ac_cv_path_ICECC_WRAPPER
-if test -n "$ICECC_WRAPPER"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ICECC_WRAPPER" >&5
-$as_echo "$ICECC_WRAPPER" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$ICECC_WRAPPER" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !ICECC_WRAPPER! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!ICECC_WRAPPER!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xICECC_WRAPPER" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of ICECC_WRAPPER from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of ICECC_WRAPPER from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in compilerwrapper
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_ICECC_WRAPPER+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $ICECC_WRAPPER in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_ICECC_WRAPPER="$ICECC_WRAPPER" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_ICECC_WRAPPER="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-ICECC_WRAPPER=$ac_cv_path_ICECC_WRAPPER
-if test -n "$ICECC_WRAPPER"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ICECC_WRAPPER" >&5
-$as_echo "$ICECC_WRAPPER" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$ICECC_WRAPPER" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$ICECC_WRAPPER" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool ICECC_WRAPPER= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool ICECC_WRAPPER= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ICECC_WRAPPER" >&5
-$as_echo_n "checking for ICECC_WRAPPER... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$ICECC_WRAPPER"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool ICECC_WRAPPER=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool ICECC_WRAPPER=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_ICECC_WRAPPER+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $ICECC_WRAPPER in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_ICECC_WRAPPER="$ICECC_WRAPPER" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_ICECC_WRAPPER="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-ICECC_WRAPPER=$ac_cv_path_ICECC_WRAPPER
-if test -n "$ICECC_WRAPPER"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ICECC_WRAPPER" >&5
-$as_echo "$ICECC_WRAPPER" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$ICECC_WRAPPER" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool ICECC_WRAPPER=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool ICECC_WRAPPER=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ICECC_WRAPPER" >&5
-$as_echo_n "checking for ICECC_WRAPPER... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool ICECC_WRAPPER=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
- if test "x$ICECC_WRAPPER" = x; then
- as_fn_error $? "Could not find required tool for ICECC_WRAPPER" "$LINENO" 5
- fi
-
-
-
- ( cd ${CONFIGURESUPPORT_OUTPUTDIR}/icecc \
- && ${ICECC_CREATE_ENV} --clang ${CC} ${ICECC_WRAPPER} > ${icecc_create_env_log} 2>&1 )
- if test "$?" != "0"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: icecc-create-env output:" >&5
-$as_echo "$as_me: icecc-create-env output:" >&6;}
- cat ${icecc_create_env_log}
- as_fn_error $? "Failed to create icecc compiler environment" "$LINENO" 5
- fi
-
- else
- as_fn_error $? "Can only create icecc compiler packages for toolchain types gcc and clang" "$LINENO" 5
- fi
- PATH="$old_path"
- # The bundle with the compiler gets a name based on checksums. Parse log file
- # to find it.
- ICECC_ENV_BUNDLE_BASENAME="`${SED} -n '/^creating/s/creating //p' ${icecc_create_env_log}`"
- ICECC_ENV_BUNDLE="${CONFIGURESUPPORT_OUTPUTDIR}/icecc/${ICECC_ENV_BUNDLE_BASENAME}"
- if test ! -f ${ICECC_ENV_BUNDLE}; then
- as_fn_error $? "icecc-create-env did not produce an environment ${ICECC_ENV_BUNDLE}" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for icecc build environment for target compiler" >&5
-$as_echo_n "checking for icecc build environment for target compiler... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${ICECC_ENV_BUNDLE}" >&5
-$as_echo "${ICECC_ENV_BUNDLE}" >&6; }
- ICECC="ICECC_VERSION=${ICECC_ENV_BUNDLE} ICECC_CC=${CC} ICECC_CXX=${CXX} ${ICECC_CMD}"
-
- if test "x${COMPILE_TYPE}" = "xcross"; then
- # If cross compiling, create a separate env package for the build compiler
- # Assume "gcc" or "cc" is gcc and "clang" is clang. Otherwise bail.
- icecc_create_env_log_build="${CONFIGURESUPPORT_OUTPUTDIR}/icecc/icecc_create_env_build.log"
- if test "x${BUILD_CC##*/}" = "xgcc" || test "x${BUILD_CC##*/}" = "xcc"; then
-
- ( cd ${CONFIGURESUPPORT_OUTPUTDIR}/icecc \
- && ${ICECC_CREATE_ENV} ${icecc_gcc_arg} ${BUILD_CC} ${BUILD_CXX} > \
- ${icecc_create_env_log_build} 2>&1 )
- if test "$?" != "0"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: icecc-create-env output:" >&5
-$as_echo "$as_me: icecc-create-env output:" >&6;}
- cat \
- ${icecc_create_env_log_build}
- as_fn_error $? "Failed to create icecc compiler environment" "$LINENO" 5
- fi
-
- elif test "x${BUILD_CC##*/}" = "xclang"; then
-
- ( cd ${CONFIGURESUPPORT_OUTPUTDIR}/icecc \
- && ${ICECC_CREATE_ENV} --clang ${BUILD_CC} ${ICECC_WRAPPER} > ${icecc_create_env_log_build} 2>&1 )
- if test "$?" != "0"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: icecc-create-env output:" >&5
-$as_echo "$as_me: icecc-create-env output:" >&6;}
- cat ${icecc_create_env_log_build}
- as_fn_error $? "Failed to create icecc compiler environment" "$LINENO" 5
- fi
-
- else
- as_fn_error $? "Cannot create icecc compiler package for ${BUILD_CC}" "$LINENO" 5
- fi
- ICECC_ENV_BUNDLE_BASENAME="`${SED} -n '/^creating/s/creating //p' ${icecc_create_env_log_build}`"
- ICECC_ENV_BUNDLE="${CONFIGURESUPPORT_OUTPUTDIR}/icecc/${ICECC_ENV_BUNDLE_BASENAME}"
- if test ! -f ${ICECC_ENV_BUNDLE}; then
- as_fn_error $? "icecc-create-env did not produce an environment ${ICECC_ENV_BUNDLE}" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for icecc build environment for build compiler" >&5
-$as_echo_n "checking for icecc build environment for build compiler... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${ICECC_ENV_BUNDLE}" >&5
-$as_echo "${ICECC_ENV_BUNDLE}" >&6; }
- BUILD_ICECC="ICECC_VERSION=${ICECC_ENV_BUNDLE} ICECC_CC=${BUILD_CC} \
- ICECC_CXX=${BUILD_CXX} ${ICECC_CMD}"
- else
- BUILD_ICECC="${ICECC}"
- fi
-
-
- fi
-
-
-# Can the C/C++ compiler use precompiled headers?
-
-
- ###############################################################################
- #
- # Can the C/C++ compiler use precompiled headers?
- #
- # Check whether --enable-precompiled-headers was given.
-if test "${enable_precompiled_headers+set}" = set; then :
- enableval=$enable_precompiled_headers; ENABLE_PRECOMPH=${enable_precompiled_headers}
-else
- ENABLE_PRECOMPH=yes
-fi
-
-
- USE_PRECOMPILED_HEADER=true
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking If precompiled header is enabled" >&5
-$as_echo_n "checking If precompiled header is enabled... " >&6; }
- if test "x$ENABLE_PRECOMPH" = xno; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, forced" >&5
-$as_echo "no, forced" >&6; }
- USE_PRECOMPILED_HEADER=false
- elif test "x$ICECC" != "x"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, does not work effectively with icecc" >&5
-$as_echo "no, does not work effectively with icecc" >&6; }
- USE_PRECOMPILED_HEADER=false
- elif test "x$TOOLCHAIN_TYPE" = xsolstudio; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, does not work with Solaris Studio" >&5
-$as_echo "no, does not work with Solaris Studio" >&6; }
- USE_PRECOMPILED_HEADER=false
- elif test "x$TOOLCHAIN_TYPE" = xxlc; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, does not work with xlc" >&5
-$as_echo "no, does not work with xlc" >&6; }
- USE_PRECOMPILED_HEADER=false
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
- fi
-
- if test "x$ENABLE_PRECOMPH" = xyes; then
- # Check that the compiler actually supports precomp headers.
- if test "x$TOOLCHAIN_TYPE" = xgcc; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking that precompiled headers work" >&5
-$as_echo_n "checking that precompiled headers work... " >&6; }
- echo "int alfa();" > conftest.h
- $CXX -x c++-header conftest.h -o conftest.hpp.gch 2>&5 >&5
- if test ! -f conftest.hpp.gch; then
- USE_PRECOMPILED_HEADER=false
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
- fi
- $RM conftest.h conftest.hpp.gch
- fi
- fi
-
-
-
-
-# Setup use of ccache, if available
-
- # Check whether --enable-ccache was given.
-if test "${enable_ccache+set}" = set; then :
- enableval=$enable_ccache;
-fi
-
-
- CCACHE_STATUS=
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking is ccache enabled" >&5
-$as_echo_n "checking is ccache enabled... " >&6; }
- if test "x$enable_ccache" = xyes; then
- if test "x$TOOLCHAIN_TYPE" = "xgcc" -o "x$TOOLCHAIN_TYPE" = "xclang"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
- OLD_PATH="$PATH"
- if test "x$TOOLCHAIN_PATH" != x; then
- PATH=$TOOLCHAIN_PATH:$PATH
- fi
-
-
-
- # Publish this variable in the help.
-
-
- if [ -z "${CCACHE+x}" ]; then
- # The variable is not set by user, try to locate tool using the code snippet
- for ac_prog in ccache
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_CCACHE+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $CCACHE in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_CCACHE="$CCACHE" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_CCACHE="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-CCACHE=$ac_cv_path_CCACHE
-if test -n "$CCACHE"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CCACHE" >&5
-$as_echo "$CCACHE" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$CCACHE" && break
-done
-
- else
- # The variable is set, but is it from the command line or the environment?
-
- # Try to remove the string !CCACHE! from our list.
- try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!CCACHE!/}
- if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
- # If it failed, the variable was not from the command line. Ignore it,
- # but warn the user (except for BASH, which is always set by the calling BASH).
- if test "xCCACHE" != xBASH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of CCACHE from the environment. Use command line variables instead." >&5
-$as_echo "$as_me: WARNING: Ignoring value of CCACHE from the environment. Use command line variables instead." >&2;}
- fi
- # Try to locate tool using the code snippet
- for ac_prog in ccache
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_CCACHE+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $CCACHE in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_CCACHE="$CCACHE" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_CCACHE="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-CCACHE=$ac_cv_path_CCACHE
-if test -n "$CCACHE"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CCACHE" >&5
-$as_echo "$CCACHE" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$CCACHE" && break
-done
-
- else
- # If it succeeded, then it was overridden by the user. We will use it
- # for the tool.
-
- # First remove it from the list of overridden variables, so we can test
- # for unknown variables in the end.
- CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
-
- # Check if we try to supply an empty value
- if test "x$CCACHE" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool CCACHE= (no value)" >&5
-$as_echo "$as_me: Setting user supplied tool CCACHE= (no value)" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CCACHE" >&5
-$as_echo_n "checking for CCACHE... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
-$as_echo "disabled" >&6; }
- else
- # Check if the provided tool contains a complete path.
- tool_specified="$CCACHE"
- tool_basename="${tool_specified##*/}"
- if test "x$tool_basename" = "x$tool_specified"; then
- # A command without a complete path is provided, search $PATH.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool CCACHE=$tool_basename" >&5
-$as_echo "$as_me: Will search for user supplied tool CCACHE=$tool_basename" >&6;}
- # Extract the first word of "$tool_basename", so it can be a program name with args.
-set dummy $tool_basename; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_CCACHE+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $CCACHE in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_CCACHE="$CCACHE" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_CCACHE="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-CCACHE=$ac_cv_path_CCACHE
-if test -n "$CCACHE"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CCACHE" >&5
-$as_echo "$CCACHE" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$CCACHE" = x; then
- as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
- fi
- else
- # Otherwise we believe it is a complete path. Use it as it is.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool CCACHE=$tool_specified" >&5
-$as_echo "$as_me: Will use user supplied tool CCACHE=$tool_specified" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CCACHE" >&5
-$as_echo_n "checking for CCACHE... " >&6; }
- if test ! -x "$tool_specified"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
- as_fn_error $? "User supplied tool CCACHE=$tool_specified does not exist or is not executable" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
-$as_echo "$tool_specified" >&6; }
- fi
- fi
- fi
-
- fi
-
-
-
- if test "x$CCACHE" = x; then
- as_fn_error $? "Could not find required tool for CCACHE" "$LINENO" 5
- fi
-
-
- PATH="$OLD_PATH"
- CCACHE_VERSION=`$CCACHE --version | head -n1 | $SED 's/[A-Za-z ]*//'`
- CCACHE_STATUS="Active ($CCACHE_VERSION)"
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: ccache is not supported with toolchain type $TOOLCHAIN_TYPE" >&5
-$as_echo "$as_me: WARNING: ccache is not supported with toolchain type $TOOLCHAIN_TYPE" >&2;}
- fi
- elif test "x$enable_ccache" = xno; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, explicitly disabled" >&5
-$as_echo "no, explicitly disabled" >&6; }
- CCACHE_STATUS="Disabled"
- elif test "x$enable_ccache" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: unknown" >&5
-$as_echo "unknown" >&6; }
- as_fn_error $? "--enable-ccache does not accept any parameters" "$LINENO" 5
- fi
-
-
-
-# Check whether --with-ccache-dir was given.
-if test "${with_ccache_dir+set}" = set; then :
- withval=$with_ccache_dir;
-fi
-
-
- if test "x$with_ccache_dir" != x; then
- # When using a non home ccache directory, assume the use is to share ccache files
- # with other users. Thus change the umask.
- SET_CCACHE_DIR="CCACHE_DIR=$with_ccache_dir CCACHE_UMASK=002"
- if test "x$CCACHE" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: --with-ccache-dir has no meaning when ccache is not enabled" >&5
-$as_echo "$as_me: WARNING: --with-ccache-dir has no meaning when ccache is not enabled" >&2;}
- fi
- fi
-
- if test "x$CCACHE" != x; then
-
- if test "x$CCACHE" != x; then
- if test "x$OPENJDK_BUILD_OS" = "xmacosx"; then
- HAS_BAD_CCACHE=`$ECHO $CCACHE_VERSION | \
- $GREP -e '^1\.' -e '^2\.' -e '^3\.0\.' -e '^3\.1\.'`
- if test "x$HAS_BAD_CCACHE" != "x"; then
- as_fn_error $? "On macosx, ccache 3.2 or later is required, found $CCACHE_VERSION" "$LINENO" 5
- fi
- fi
- if test "x$USE_PRECOMPILED_HEADER" = "xtrue"; then
- HAS_BAD_CCACHE=`$ECHO $CCACHE_VERSION | \
- $GREP -e '^1.*' -e '^2.*' -e '^3\.0.*' -e '^3\.1\.[0123]$'`
- if test "x$HAS_BAD_CCACHE" != "x"; then
- as_fn_error $? "Precompiled headers requires ccache 3.1.4 or later, found $CCACHE_VERSION" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if C-compiler supports ccache precompiled headers" >&5
-$as_echo_n "checking if C-compiler supports ccache precompiled headers... " >&6; }
- CCACHE_PRECOMP_FLAG="-fpch-preprocess"
- PUSHED_FLAGS="$CXXFLAGS"
- CXXFLAGS="$CCACHE_PRECOMP_FLAG $CXXFLAGS"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_cxx_try_compile "$LINENO"; then :
- CC_KNOWS_CCACHE_TRICK=yes
-else
- CC_KNOWS_CCACHE_TRICK=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- CXXFLAGS="$PUSHED_FLAGS"
- if test "x$CC_KNOWS_CCACHE_TRICK" = xyes; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
- CFLAGS_CCACHE="$CCACHE_PRECOMP_FLAG"
-
- CCACHE_SLOPPINESS=pch_defines,time_macros
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- as_fn_error $? "Cannot use ccache with precompiled headers without compiler support for $CCACHE_PRECOMP_FLAG" "$LINENO" 5
- fi
- fi
-
- CCACHE="CCACHE_COMPRESS=1 $SET_CCACHE_DIR \
- CCACHE_SLOPPINESS=$CCACHE_SLOPPINESS CCACHE_BASEDIR=$TOPDIR $CCACHE"
-
- if test "x$SET_CCACHE_DIR" != x; then
- mkdir -p $CCACHE_DIR > /dev/null 2>&1
- chmod a+rwxs $CCACHE_DIR > /dev/null 2>&1
- fi
- fi
-
- fi
-
-
-###############################################################################
-#
-# And now the finish...
-#
-###############################################################################
-
-# Check for some common pitfalls
-
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- file_to_test="$TOPDIR/LICENSE"
- if test `$STAT -c '%a' "$file_to_test"` -lt 400; then
- as_fn_error $? "Bad file permissions on src files. This is usually caused by cloning the repositories with a non cygwin hg in a directory not created in cygwin." "$LINENO" 5
- fi
- fi
-
-
- # Did user specify any unknown variables?
-
- if test "x$CONFIGURE_OVERRIDDEN_VARIABLES" != x; then
- # Replace the separating ! with spaces before presenting for end user.
- unknown_variables=${CONFIGURE_OVERRIDDEN_VARIABLES//!/ }
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: The following variables might be unknown to configure: $unknown_variables" >&5
-$as_echo "$as_me: WARNING: The following variables might be unknown to configure: $unknown_variables" >&2;}
- fi
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if build directory is on local disk" >&5
-$as_echo_n "checking if build directory is on local disk... " >&6; }
-
- # df -l lists only local disks; if the given directory is not found then
- # a non-zero exit code is given
- if test "x$DF" = x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- # msys does not have df; use Windows "net use" instead.
- IS_NETWORK_DISK=`net use | grep \`pwd -W | cut -d ":" -f 1 | tr a-z A-Z\`:`
- if test "x$IS_NETWORK_DISK" = x; then
- OUTPUT_DIR_IS_LOCAL="yes"
- else
- OUTPUT_DIR_IS_LOCAL="no"
- fi
- else
- # No df here, say it's local
- OUTPUT_DIR_IS_LOCAL="yes"
- fi
- else
- # JDK-8189619
- # df on AIX does not understand -l. On modern AIXes it understands "-T local" which
- # is the same. On older AIXes we just continue to live with a "not local build" warning.
- if test "x$OPENJDK_TARGET_OS" = xaix; then
- DF_LOCAL_ONLY_OPTION='-T local'
- else
- DF_LOCAL_ONLY_OPTION='-l'
- fi
- if $DF $DF_LOCAL_ONLY_OPTION $OUTPUTDIR > /dev/null 2>&1; then
- OUTPUT_DIR_IS_LOCAL="yes"
- else
- OUTPUT_DIR_IS_LOCAL="no"
- fi
- fi
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OUTPUT_DIR_IS_LOCAL" >&5
-$as_echo "$OUTPUT_DIR_IS_LOCAL" >&6; }
-
-
-
- # Check if the user has any old-style ALT_ variables set.
- FOUND_ALT_VARIABLES=`env | grep ^ALT_`
-
- # Before generating output files, test if they exist. If they do, this is a reconfigure.
- # Since we can't properly handle the dependencies for this, warn the user about the situation
- if test -e $OUTPUTDIR/spec.gmk; then
- IS_RECONFIGURE=yes
- else
- IS_RECONFIGURE=no
- fi
-
-
-# At the end, call the custom hook. (Dummy macro if no custom sources available)
-
-
-# This needs to be done after CUSTOM_LATE_HOOK since we can setup custom features.
-
- # Keep feature lists sorted and free of duplicates
- JVM_FEATURES_server="$($ECHO $($PRINTF '%s\n' $JVM_FEATURES_server | $SORT -u))"
- JVM_FEATURES_client="$($ECHO $($PRINTF '%s\n' $JVM_FEATURES_client | $SORT -u))"
- JVM_FEATURES_core="$($ECHO $($PRINTF '%s\n' $JVM_FEATURES_core | $SORT -u))"
- JVM_FEATURES_minimal="$($ECHO $($PRINTF '%s\n' $JVM_FEATURES_minimal | $SORT -u))"
- JVM_FEATURES_zero="$($ECHO $($PRINTF '%s\n' $JVM_FEATURES_zero | $SORT -u))"
- JVM_FEATURES_custom="$($ECHO $($PRINTF '%s\n' $JVM_FEATURES_custom | $SORT -u))"
-
- # Validate features
- for variant in $JVM_VARIANTS; do
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking JVM features for JVM variant '$variant'" >&5
-$as_echo_n "checking JVM features for JVM variant '$variant'... " >&6; }
- features_var_name=JVM_FEATURES_$variant
- JVM_FEATURES_TO_TEST=${!features_var_name}
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $JVM_FEATURES_TO_TEST" >&5
-$as_echo "$JVM_FEATURES_TO_TEST" >&6; }
- NEEDLE=${VALID_JVM_FEATURES// /$'\n'}
- STACK=${JVM_FEATURES_TO_TEST// /$'\n'}
- INVALID_FEATURES=`$GREP -Fvx "${NEEDLE}" <<< "${STACK}"`
- if test "x$INVALID_FEATURES" != x; then
- as_fn_error $? "Invalid JVM feature(s): $INVALID_FEATURES" "$LINENO" 5
- fi
- done
-
-
-# We're messing a bit with internal autoconf variables to put the config.status
-# in the output directory instead of the current directory.
-CONFIG_STATUS="$CONFIGURESUPPORT_OUTPUTDIR/config.status"
-
-# Create the actual output files. Now the main work of configure is done.
-cat >confcache <<\_ACEOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs, see configure's option --config-cache.
-# It is not useful on other systems. If it contains results you don't
-# want to keep, you may remove or edit it.
-#
-# config.status only pays attention to the cache file if you give it
-# the --recheck option to rerun configure.
-#
-# `ac_cv_env_foo' variables (set or unset) will be overridden when
-# loading this file, other *unset* `ac_cv_foo' will be assigned the
-# following values.
-
-_ACEOF
-
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, we kill variables containing newlines.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(
- for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
- eval ac_val=\$$ac_var
- case $ac_val in #(
- *${as_nl}*)
- case $ac_var in #(
- *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
-$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
- esac
- case $ac_var in #(
- _ | IFS | as_nl) ;; #(
- BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
- *) { eval $ac_var=; unset $ac_var;} ;;
- esac ;;
- esac
- done
-
- (set) 2>&1 |
- case $as_nl`(ac_space=' '; set) 2>&1` in #(
- *${as_nl}ac_space=\ *)
- # `set' does not quote correctly, so add quotes: double-quote
- # substitution turns \\\\ into \\, and sed turns \\ into \.
- sed -n \
- "s/'/'\\\\''/g;
- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
- ;; #(
- *)
- # `set' quotes correctly as required by POSIX, so do not add quotes.
- sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
- ;;
- esac |
- sort
-) |
- sed '
- /^ac_cv_env_/b end
- t clear
- :clear
- s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
- t end
- s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
- :end' >>confcache
-if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
- if test -w "$cache_file"; then
- if test "x$cache_file" != "x/dev/null"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
-$as_echo "$as_me: updating cache $cache_file" >&6;}
- if test ! -f "$cache_file" || test -h "$cache_file"; then
- cat confcache >"$cache_file"
- else
- case $cache_file in #(
- */* | ?:*)
- mv -f confcache "$cache_file"$$ &&
- mv -f "$cache_file"$$ "$cache_file" ;; #(
- *)
- mv -f confcache "$cache_file" ;;
- esac
- fi
- fi
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
-$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
- fi
-fi
-rm -f confcache
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-#
-# If the first sed substitution is executed (which looks for macros that
-# take arguments), then branch to the quote section. Otherwise,
-# look for a macro that doesn't take arguments.
-ac_script='
-:mline
-/\\$/{
- N
- s,\\\n,,
- b mline
-}
-t clear
-:clear
-s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\)/-D\1=\2/g
-t quote
-s/^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)/-D\1=\2/g
-t quote
-b any
-:quote
-s/[ `~#$^&*(){}\\|;'\''"<>?]/\\&/g
-s/\[/\\&/g
-s/\]/\\&/g
-s/\$/$$/g
-H
-:any
-${
- g
- s/^\n//
- s/\n/ /g
- p
-}
-'
-DEFS=`sed -n "$ac_script" confdefs.h`
-
-
-ac_libobjs=
-ac_ltlibobjs=
-U=
-for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
- # 1. Remove the extension, and $U if already installed.
- ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
- ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
- # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
- # will be set to the directory where LIBOBJS objects are built.
- as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
- as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
-done
-LIBOBJS=$ac_libobjs
-
-LTLIBOBJS=$ac_ltlibobjs
-
-
-
-: "${CONFIG_STATUS=./config.status}"
-ac_write_fail=0
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files $CONFIG_STATUS"
-{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
-$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
-as_write_fail=0
-cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
-#! $SHELL
-# Generated by $as_me.
-# Run this file to recreate the current configuration.
-# Compiler output produced by configure, useful for debugging
-# configure, is in config.log if it exists.
-
-debug=false
-ac_cs_recheck=false
-ac_cs_silent=false
-
-SHELL=\${CONFIG_SHELL-$SHELL}
-export SHELL
-_ASEOF
-cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
-## -------------------- ##
-## M4sh Initialization. ##
-## -------------------- ##
-
-# Be more Bourne compatible
-DUALCASE=1; export DUALCASE # for MKS sh
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
- emulate sh
- NULLCMD=:
- # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
- setopt NO_GLOB_SUBST
-else
- case `(set -o) 2>/dev/null` in #(
- *posix*) :
- set -o posix ;; #(
- *) :
- ;;
-esac
-fi
-
-
-as_nl='
-'
-export as_nl
-# Printing a long string crashes Solaris 7 /usr/bin/printf.
-as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
-# Prefer a ksh shell builtin over an external printf program on Solaris,
-# but without wasting forks for bash or zsh.
-if test -z "$BASH_VERSION$ZSH_VERSION" \
- && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
- as_echo='print -r --'
- as_echo_n='print -rn --'
-elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
- as_echo='printf %s\n'
- as_echo_n='printf %s'
-else
- if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
- as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
- as_echo_n='/usr/ucb/echo -n'
- else
- as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
- as_echo_n_body='eval
- arg=$1;
- case $arg in #(
- *"$as_nl"*)
- expr "X$arg" : "X\\(.*\\)$as_nl";
- arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
- esac;
- expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
- '
- export as_echo_n_body
- as_echo_n='sh -c $as_echo_n_body as_echo'
- fi
- export as_echo_body
- as_echo='sh -c $as_echo_body as_echo'
-fi
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- PATH_SEPARATOR=:
- (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
- (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
- PATH_SEPARATOR=';'
- }
-fi
-
-
-# IFS
-# We need space, tab and new line, in precisely that order. Quoting is
-# there to prevent editors from complaining about space-tab.
-# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-# splitting by setting IFS to empty value.)
-IFS=" "" $as_nl"
-
-# Find who we are. Look in the path if we contain no directory separator.
-as_myself=
-case $0 in #((
- *[\\/]* ) as_myself=$0 ;;
- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-# We did not find ourselves, most probably we were run as `sh COMMAND'
-# in which case we are not to be found in the path.
-if test "x$as_myself" = x; then
- as_myself=$0
-fi
-if test ! -f "$as_myself"; then
- $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
- exit 1
-fi
-
-# Unset variables that we do not need and which cause bugs (e.g. in
-# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
-# suppresses any "Segmentation fault" message there. '((' could
-# trigger a bug in pdksh 5.2.14.
-for as_var in BASH_ENV ENV MAIL MAILPATH
-do eval test x\${$as_var+set} = xset \
- && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
-done
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-LC_ALL=C
-export LC_ALL
-LANGUAGE=C
-export LANGUAGE
-
-# CDPATH.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-
-# as_fn_error STATUS ERROR [LINENO LOG_FD]
-# ----------------------------------------
-# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
-# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
-# script with STATUS, using 1 if that was 0.
-as_fn_error ()
-{
- as_status=$1; test $as_status -eq 0 && as_status=1
- if test "$4"; then
- as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
- fi
- $as_echo "$as_me: error: $2" >&2
- as_fn_exit $as_status
-} # as_fn_error
-
-
-# as_fn_set_status STATUS
-# -----------------------
-# Set $? to STATUS, without forking.
-as_fn_set_status ()
-{
- return $1
-} # as_fn_set_status
-
-# as_fn_exit STATUS
-# -----------------
-# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
-as_fn_exit ()
-{
- set +e
- as_fn_set_status $1
- exit $1
-} # as_fn_exit
-
-# as_fn_unset VAR
-# ---------------
-# Portably unset VAR.
-as_fn_unset ()
-{
- { eval $1=; unset $1;}
-}
-as_unset=as_fn_unset
-# as_fn_append VAR VALUE
-# ----------------------
-# Append the text in VALUE to the end of the definition contained in VAR. Take
-# advantage of any shell optimizations that allow amortized linear growth over
-# repeated appends, instead of the typical quadratic growth present in naive
-# implementations.
-if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
- eval 'as_fn_append ()
- {
- eval $1+=\$2
- }'
-else
- as_fn_append ()
- {
- eval $1=\$$1\$2
- }
-fi # as_fn_append
-
-# as_fn_arith ARG...
-# ------------------
-# Perform arithmetic evaluation on the ARGs, and store the result in the
-# global $as_val. Take advantage of shells that can avoid forks. The arguments
-# must be portable across $(()) and expr.
-if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
- eval 'as_fn_arith ()
- {
- as_val=$(( $* ))
- }'
-else
- as_fn_arith ()
- {
- as_val=`expr "$@" || test $? -eq 1`
- }
-fi # as_fn_arith
-
-
-if expr a : '\(a\)' >/dev/null 2>&1 &&
- test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
- as_basename=basename
-else
- as_basename=false
-fi
-
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
- as_dirname=dirname
-else
- as_dirname=false
-fi
-
-as_me=`$as_basename -- "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
- X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X/"$0" |
- sed '/^.*\/\([^/][^/]*\)\/*$/{
- s//\1/
- q
- }
- /^X\/\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\/\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
-
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in #(((((
--n*)
- case `echo 'xy\c'` in
- *c*) ECHO_T=' ';; # ECHO_T is single tab character.
- xy) ECHO_C='\c';;
- *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
- ECHO_T=' ';;
- esac;;
-*)
- ECHO_N='-n';;
-esac
-
-rm -f conf$$ conf$$.exe conf$$.file
-if test -d conf$$.dir; then
- rm -f conf$$.dir/conf$$.file
-else
- rm -f conf$$.dir
- mkdir conf$$.dir 2>/dev/null
-fi
-if (echo >conf$$.file) 2>/dev/null; then
- if ln -s conf$$.file conf$$ 2>/dev/null; then
- as_ln_s='ln -s'
- # ... but there are two gotchas:
- # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
- # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
- # In both cases, we have to default to `cp -pR'.
- ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
- as_ln_s='cp -pR'
- elif ln conf$$.file conf$$ 2>/dev/null; then
- as_ln_s=ln
- else
- as_ln_s='cp -pR'
- fi
-else
- as_ln_s='cp -pR'
-fi
-rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-rmdir conf$$.dir 2>/dev/null
-
-
-# as_fn_mkdir_p
-# -------------
-# Create "$as_dir" as a directory, including parents if necessary.
-as_fn_mkdir_p ()
-{
-
- case $as_dir in #(
- -*) as_dir=./$as_dir;;
- esac
- test -d "$as_dir" || eval $as_mkdir_p || {
- as_dirs=
- while :; do
- case $as_dir in #(
- *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
- *) as_qdir=$as_dir;;
- esac
- as_dirs="'$as_qdir' $as_dirs"
- as_dir=`$as_dirname -- "$as_dir" ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_dir" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- test -d "$as_dir" && break
- done
- test -z "$as_dirs" || eval "mkdir $as_dirs"
- } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
-
-
-} # as_fn_mkdir_p
-if mkdir -p . 2>/dev/null; then
- as_mkdir_p='mkdir -p "$as_dir"'
-else
- test -d ./-p && rmdir ./-p
- as_mkdir_p=false
-fi
-
-
-# as_fn_executable_p FILE
-# -----------------------
-# Test if FILE is an executable regular file.
-as_fn_executable_p ()
-{
- test -f "$1" && test -x "$1"
-} # as_fn_executable_p
-as_test_x='test -x'
-as_executable_p=as_fn_executable_p
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-exec 6>&1
-## ----------------------------------- ##
-## Main body of $CONFIG_STATUS script. ##
-## ----------------------------------- ##
-_ASEOF
-test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-# Save the log message, to keep $0 and so on meaningful, and to
-# report actual input values of CONFIG_FILES etc. instead of their
-# values after options handling.
-ac_log="
-This file was extended by OpenJDK $as_me jdk9, which was
-generated by GNU Autoconf 2.69. Invocation command line was
-
- CONFIG_FILES = $CONFIG_FILES
- CONFIG_HEADERS = $CONFIG_HEADERS
- CONFIG_LINKS = $CONFIG_LINKS
- CONFIG_COMMANDS = $CONFIG_COMMANDS
- $ $0 $@
-
-on `(hostname || uname -n) 2>/dev/null | sed 1q`
-"
-
-_ACEOF
-
-case $ac_config_files in *"
-"*) set x $ac_config_files; shift; ac_config_files=$*;;
-esac
-
-
-
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-# Files that config.status was made for.
-config_files="$ac_config_files"
-
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-ac_cs_usage="\
-\`$as_me' instantiates files and other configuration actions
-from templates according to the current configuration. Unless the files
-and actions are specified as TAGs, all are instantiated by default.
-
-Usage: $0 [OPTION]... [TAG]...
-
- -h, --help print this help, then exit
- -V, --version print version number and configuration settings, then exit
- --config print configuration, then exit
- -q, --quiet, --silent
- do not print progress messages
- -d, --debug don't remove temporary files
- --recheck update $as_me by reconfiguring in the same conditions
- --file=FILE[:TEMPLATE]
- instantiate the configuration file FILE
-
-Configuration files:
-$config_files
-
-Report bugs to .
-OpenJDK home page: ."
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
-ac_cs_version="\\
-OpenJDK config.status jdk9
-configured by $0, generated by GNU Autoconf 2.69,
- with options \\"\$ac_cs_config\\"
-
-Copyright (C) 2012 Free Software Foundation, Inc.
-This config.status script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it."
-
-ac_pwd='$ac_pwd'
-srcdir='$srcdir'
-AWK='$AWK'
-test -n "\$AWK" || AWK=awk
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-# The default lists apply if the user does not specify any file.
-ac_need_defaults=:
-while test $# != 0
-do
- case $1 in
- --*=?*)
- ac_option=`expr "X$1" : 'X\([^=]*\)='`
- ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
- ac_shift=:
- ;;
- --*=)
- ac_option=`expr "X$1" : 'X\([^=]*\)='`
- ac_optarg=
- ac_shift=:
- ;;
- *)
- ac_option=$1
- ac_optarg=$2
- ac_shift=shift
- ;;
- esac
-
- case $ac_option in
- # Handling of the options.
- -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
- ac_cs_recheck=: ;;
- --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
- $as_echo "$ac_cs_version"; exit ;;
- --config | --confi | --conf | --con | --co | --c )
- $as_echo "$ac_cs_config"; exit ;;
- --debug | --debu | --deb | --de | --d | -d )
- debug=: ;;
- --file | --fil | --fi | --f )
- $ac_shift
- case $ac_optarg in
- *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
- '') as_fn_error $? "missing file argument" ;;
- esac
- as_fn_append CONFIG_FILES " '$ac_optarg'"
- ac_need_defaults=false;;
- --he | --h | --help | --hel | -h )
- $as_echo "$ac_cs_usage"; exit ;;
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil | --si | --s)
- ac_cs_silent=: ;;
-
- # This is an error.
- -*) as_fn_error $? "unrecognized option: \`$1'
-Try \`$0 --help' for more information." ;;
-
- *) as_fn_append ac_config_targets " $1"
- ac_need_defaults=false ;;
-
- esac
- shift
-done
-
-ac_configure_extra_args=
-
-if $ac_cs_silent; then
- exec 6>/dev/null
- ac_configure_extra_args="$ac_configure_extra_args --silent"
-fi
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-if \$ac_cs_recheck; then
- set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
- shift
- \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
- CONFIG_SHELL='$SHELL'
- export CONFIG_SHELL
- exec "\$@"
-fi
-
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-exec 5>>config.log
-{
- echo
- sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
-## Running $as_me. ##
-_ASBOX
- $as_echo "$ac_log"
-} >&5
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-
-# Handling of arguments.
-for ac_config_target in $ac_config_targets
-do
- case $ac_config_target in
- "$OUTPUTDIR/spec.gmk") CONFIG_FILES="$CONFIG_FILES $OUTPUTDIR/spec.gmk:$AUTOCONF_DIR/spec.gmk.in" ;;
- "$OUTPUTDIR/bootcycle-spec.gmk") CONFIG_FILES="$CONFIG_FILES $OUTPUTDIR/bootcycle-spec.gmk:$AUTOCONF_DIR/bootcycle-spec.gmk.in" ;;
- "$OUTPUTDIR/buildjdk-spec.gmk") CONFIG_FILES="$CONFIG_FILES $OUTPUTDIR/buildjdk-spec.gmk:$AUTOCONF_DIR/buildjdk-spec.gmk.in" ;;
- "$OUTPUTDIR/compare.sh") CONFIG_FILES="$CONFIG_FILES $OUTPUTDIR/compare.sh:$AUTOCONF_DIR/compare.sh.in" ;;
- "$OUTPUTDIR/Makefile") CONFIG_FILES="$CONFIG_FILES $OUTPUTDIR/Makefile:$AUTOCONF_DIR/Makefile.in" ;;
-
- *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
- esac
-done
-
-
-# If the user did not use the arguments to specify the items to instantiate,
-# then the envvar interface is used. Set only those that are not.
-# We use the long form for the default assignment because of an extremely
-# bizarre bug on SunOS 4.1.3.
-if $ac_need_defaults; then
- test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
-fi
-
-# Have a temporary directory for convenience. Make it in the build tree
-# simply because there is no reason against having it here, and in addition,
-# creating and moving files from /tmp can sometimes cause problems.
-# Hook for its removal unless debugging.
-# Note that there is a small window in which the directory will not be cleaned:
-# after its creation but before its name has been assigned to `$tmp'.
-$debug ||
-{
- tmp= ac_tmp=
- trap 'exit_status=$?
- : "${ac_tmp:=$tmp}"
- { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
-' 0
- trap 'as_fn_exit 1' 1 2 13 15
-}
-# Create a (secure) tmp directory for tmp files.
-
-{
- tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
- test -d "$tmp"
-} ||
-{
- tmp=./conf$$-$RANDOM
- (umask 077 && mkdir "$tmp")
-} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
-ac_tmp=$tmp
-
-# Set up the scripts for CONFIG_FILES section.
-# No need to generate them if there are no CONFIG_FILES.
-# This happens for instance with `./config.status config.h'.
-if test -n "$CONFIG_FILES"; then
-
-
-ac_cr=`echo X | tr X '\015'`
-# On cygwin, bash can eat \r inside `` if the user requested igncr.
-# But we know of no other shell where ac_cr would be empty at this
-# point, so we can use a bashism as a fallback.
-if test "x$ac_cr" = x; then
- eval ac_cr=\$\'\\r\'
-fi
-ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null`
-if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
- ac_cs_awk_cr='\\r'
-else
- ac_cs_awk_cr=$ac_cr
-fi
-
-echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
-_ACEOF
-
-
-{
- echo "cat >conf$$subs.awk <<_ACEOF" &&
- echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
- echo "_ACEOF"
-} >conf$$subs.sh ||
- as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
-ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
-ac_delim='%!_!# '
-for ac_last_try in false false false false false :; do
- . ./conf$$subs.sh ||
- as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
-
- ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
- if test $ac_delim_n = $ac_delim_num; then
- break
- elif $ac_last_try; then
- as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
- else
- ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
- fi
-done
-rm -f conf$$subs.sh
-
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&
-_ACEOF
-sed -n '
-h
-s/^/S["/; s/!.*/"]=/
-p
-g
-s/^[^!]*!//
-:repl
-t repl
-s/'"$ac_delim"'$//
-t delim
-:nl
-h
-s/\(.\{148\}\)..*/\1/
-t more1
-s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
-p
-n
-b repl
-:more1
-s/["\\]/\\&/g; s/^/"/; s/$/"\\/
-p
-g
-s/.\{148\}//
-t nl
-:delim
-h
-s/\(.\{148\}\)..*/\1/
-t more2
-s/["\\]/\\&/g; s/^/"/; s/$/"/
-p
-b
-:more2
-s/["\\]/\\&/g; s/^/"/; s/$/"\\/
-p
-g
-s/.\{148\}//
-t delim
-' >$CONFIG_STATUS || ac_write_fail=1
-rm -f conf$$subs.awk
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-_ACAWK
-cat >>"\$ac_tmp/subs1.awk" <<_ACAWK &&
- for (key in S) S_is_set[key] = 1
- FS = ""
-
-}
-{
- line = $ 0
- nfields = split(line, field, "@")
- substed = 0
- len = length(field[1])
- for (i = 2; i < nfields; i++) {
- key = field[i]
- keylen = length(key)
- if (S_is_set[key]) {
- value = S[key]
- line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
- len += length(value) + length(field[++i])
- substed = 1
- } else
- len += 1 + keylen
- }
-
- print line
-}
-
-_ACAWK
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
- sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
-else
- cat
-fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
- || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
-_ACEOF
-
-# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
-# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
-# trailing colons and then remove the whole line if VPATH becomes empty
-# (actually we leave an empty line to preserve line numbers).
-if test "x$srcdir" = x.; then
- ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{
-h
-s///
-s/^/:/
-s/[ ]*$/:/
-s/:\$(srcdir):/:/g
-s/:\${srcdir}:/:/g
-s/:@srcdir@:/:/g
-s/^:*//
-s/:*$//
-x
-s/\(=[ ]*\).*/\1/
-G
-s/\n//
-s/^[^=]*=[ ]*$//
-}'
-fi
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-fi # test -n "$CONFIG_FILES"
-
-
-eval set X " :F $CONFIG_FILES "
-shift
-for ac_tag
-do
- case $ac_tag in
- :[FHLC]) ac_mode=$ac_tag; continue;;
- esac
- case $ac_mode$ac_tag in
- :[FHL]*:*);;
- :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
- :[FH]-) ac_tag=-:-;;
- :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
- esac
- ac_save_IFS=$IFS
- IFS=:
- set x $ac_tag
- IFS=$ac_save_IFS
- shift
- ac_file=$1
- shift
-
- case $ac_mode in
- :L) ac_source=$1;;
- :[FH])
- ac_file_inputs=
- for ac_f
- do
- case $ac_f in
- -) ac_f="$ac_tmp/stdin";;
- *) # Look for the file first in the build tree, then in the source tree
- # (if the path is not absolute). The absolute path cannot be DOS-style,
- # because $ac_f cannot contain `:'.
- test -f "$ac_f" ||
- case $ac_f in
- [\\/$]*) false;;
- *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
- esac ||
- as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
- esac
- case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
- as_fn_append ac_file_inputs " '$ac_f'"
- done
-
- # Let's still pretend it is `configure' which instantiates (i.e., don't
- # use $as_me), people would be surprised to read:
- # /* config.h. Generated by config.status. */
- configure_input='Generated from '`
- $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
- `' by configure.'
- if test x"$ac_file" != x-; then
- configure_input="$ac_file. $configure_input"
- { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
-$as_echo "$as_me: creating $ac_file" >&6;}
- fi
- # Neutralize special characters interpreted by sed in replacement strings.
- case $configure_input in #(
- *\&* | *\|* | *\\* )
- ac_sed_conf_input=`$as_echo "$configure_input" |
- sed 's/[\\\\&|]/\\\\&/g'`;; #(
- *) ac_sed_conf_input=$configure_input;;
- esac
-
- case $ac_tag in
- *:-:* | *:-) cat >"$ac_tmp/stdin" \
- || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
- esac
- ;;
- esac
-
- ac_dir=`$as_dirname -- "$ac_file" ||
-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$ac_file" : 'X\(//\)[^/]' \| \
- X"$ac_file" : 'X\(//\)$' \| \
- X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$ac_file" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- as_dir="$ac_dir"; as_fn_mkdir_p
- ac_builddir=.
-
-case "$ac_dir" in
-.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-*)
- ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
- # A ".." for each directory in $ac_dir_suffix.
- ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
- case $ac_top_builddir_sub in
- "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
- *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
- esac ;;
-esac
-ac_abs_top_builddir=$ac_pwd
-ac_abs_builddir=$ac_pwd$ac_dir_suffix
-# for backward compatibility:
-ac_top_builddir=$ac_top_build_prefix
-
-case $srcdir in
- .) # We are building in place.
- ac_srcdir=.
- ac_top_srcdir=$ac_top_builddir_sub
- ac_abs_top_srcdir=$ac_pwd ;;
- [\\/]* | ?:[\\/]* ) # Absolute name.
- ac_srcdir=$srcdir$ac_dir_suffix;
- ac_top_srcdir=$srcdir
- ac_abs_top_srcdir=$srcdir ;;
- *) # Relative name.
- ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
- ac_top_srcdir=$ac_top_build_prefix$srcdir
- ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
-esac
-ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-
-
- case $ac_mode in
- :F)
- #
- # CONFIG_FILE
- #
-
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-# If the template does not know about datarootdir, expand it.
-# FIXME: This hack should be removed a few years after 2.60.
-ac_datarootdir_hack=; ac_datarootdir_seen=
-ac_sed_dataroot='
-/datarootdir/ {
- p
- q
-}
-/@datadir@/p
-/@docdir@/p
-/@infodir@/p
-/@localedir@/p
-/@mandir@/p'
-case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
-*datarootdir*) ac_datarootdir_seen=yes;;
-*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
-$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
- ac_datarootdir_hack='
- s&@datadir@&$datadir&g
- s&@docdir@&$docdir&g
- s&@infodir@&$infodir&g
- s&@localedir@&$localedir&g
- s&@mandir@&$mandir&g
- s&\\\${datarootdir}&$datarootdir&g' ;;
-esac
-_ACEOF
-
-# Neutralize VPATH when `$srcdir' = `.'.
-# Shell code in configure.ac might set extrasub.
-# FIXME: do we really want to maintain this feature?
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-ac_sed_extra="$ac_vpsub
-$extrasub
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-:t
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-s|@configure_input@|$ac_sed_conf_input|;t t
-s&@top_builddir@&$ac_top_builddir_sub&;t t
-s&@top_build_prefix@&$ac_top_build_prefix&;t t
-s&@srcdir@&$ac_srcdir&;t t
-s&@abs_srcdir@&$ac_abs_srcdir&;t t
-s&@top_srcdir@&$ac_top_srcdir&;t t
-s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
-s&@builddir@&$ac_builddir&;t t
-s&@abs_builddir@&$ac_abs_builddir&;t t
-s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
-$ac_datarootdir_hack
-"
-eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
- >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
-
-test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
- { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
- { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \
- "$ac_tmp/out"`; test -z "$ac_out"; } &&
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined. Please make sure it is defined" >&5
-$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined. Please make sure it is defined" >&2;}
-
- rm -f "$ac_tmp/stdin"
- case $ac_file in
- -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
- *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
- esac \
- || as_fn_error $? "could not create $ac_file" "$LINENO" 5
- ;;
-
-
-
- esac
-
-done # for ac_tag
-
-
-as_fn_exit 0
-_ACEOF
-ac_clean_files=$ac_clean_files_save
-
-test $ac_write_fail = 0 ||
- as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5
-
-
-# configure is writing to config.log, and then calls config.status.
-# config.status does its own redirection, appending to config.log.
-# Unfortunately, on DOS this fails, as config.log is still kept open
-# by configure, so config.status won't be able to write to it; its
-# output is simply discarded. So we exec the FD to /dev/null,
-# effectively closing config.log, so it can be properly (re)opened and
-# appended to by config.status. When coming back to configure, we
-# need to make the FD available again.
-if test "$no_create" != yes; then
- ac_cs_success=:
- ac_config_status_args=
- test "$silent" = yes &&
- ac_config_status_args="$ac_config_status_args --quiet"
- exec 5>/dev/null
- $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
- exec 5>>config.log
- # Use ||, not &&, to avoid exiting from the if with $? = 1, which
- # would make configure fail if this is the last instruction.
- $ac_cs_success || as_fn_exit 1
-fi
-if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
-$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
-fi
-
-
-# After AC_OUTPUT, we need to do final work
-
-
- # Try to move config.log (generated by autoconf) to the configure-support directory.
- if test -e ./config.log; then
- $MV -f ./config.log "$CONFIGURESUPPORT_OUTPUTDIR/config.log" 2> /dev/null
- fi
-
- # Rotate our log file (configure.log)
- if test -e "$OUTPUTDIR/configure.log.old"; then
- $RM -f "$OUTPUTDIR/configure.log.old"
- fi
- if test -e "$OUTPUTDIR/configure.log"; then
- $MV -f "$OUTPUTDIR/configure.log" "$OUTPUTDIR/configure.log.old" 2> /dev/null
- fi
-
- # Move configure.log from current directory to the build output root
- if test -e ./configure.log; then
- $MV -f ./configure.log "$OUTPUTDIR/configure.log" 2> /dev/null
- fi
-
- # Make the compare script executable
- $CHMOD +x $OUTPUTDIR/compare.sh
-
-
-# Finally output some useful information to the user
-
- # Finally output some useful information to the user
-
- printf "\n"
- printf "====================================================\n"
- if test "x$no_create" != "xyes"; then
- if test "x$IS_RECONFIGURE" != "xyes"; then
- printf "A new configuration has been successfully created in\n%s\n" "$OUTPUTDIR"
- else
- printf "The existing configuration has been successfully updated in\n%s\n" "$OUTPUTDIR"
- fi
- else
- if test "x$IS_RECONFIGURE" != "xyes"; then
- printf "A configuration has been successfully checked but not created\n"
- else
- printf "The existing configuration has been successfully checked in\n%s\n" "$OUTPUTDIR"
- fi
- fi
- if test "x$CONFIGURE_COMMAND_LINE" != x; then
- printf "using configure arguments '$CONFIGURE_COMMAND_LINE'.\n"
- else
- printf "using default settings.\n"
- fi
-
- printf "\n"
- printf "Configuration summary:\n"
- printf "* Debug level: $DEBUG_LEVEL\n"
- printf "* HS debug level: $HOTSPOT_DEBUG_LEVEL\n"
- printf "* JDK variant: $JDK_VARIANT\n"
- printf "* JVM variants: $JVM_VARIANTS\n"
- printf "* OpenJDK target: OS: $OPENJDK_TARGET_OS, CPU architecture: $OPENJDK_TARGET_CPU_ARCH, address length: $OPENJDK_TARGET_CPU_BITS\n"
- printf "* Version string: $VERSION_STRING ($VERSION_SHORT)\n"
-
- printf "\n"
- printf "Tools summary:\n"
- if test "x$OPENJDK_BUILD_OS" = "xwindows"; then
- printf "* Environment: $WINDOWS_ENV_VENDOR version $WINDOWS_ENV_VERSION (root at $WINDOWS_ENV_ROOT_PATH)\n"
- fi
- printf "* Boot JDK: $BOOT_JDK_VERSION (at $BOOT_JDK)\n"
- if test "x$TOOLCHAIN_VERSION" != "x"; then
- print_version=" $TOOLCHAIN_VERSION"
- fi
- printf "* Toolchain: $TOOLCHAIN_TYPE ($TOOLCHAIN_DESCRIPTION$print_version)\n"
- printf "* C Compiler: Version $CC_VERSION_NUMBER (at $CC)\n"
- printf "* C++ Compiler: Version $CXX_VERSION_NUMBER (at $CXX)\n"
-
- printf "\n"
- printf "Build performance summary:\n"
- printf "* Cores to use: $JOBS\n"
- printf "* Memory limit: $MEMORY_SIZE MB\n"
- if test "x$CCACHE_STATUS" != "x"; then
- printf "* ccache status: $CCACHE_STATUS\n"
- fi
- printf "\n"
-
- if test "x$BUILDING_MULTIPLE_JVM_VARIANTS" = "xtrue"; then
- printf "NOTE: You have requested to build more than one version of the JVM, which\n"
- printf "will result in longer build times.\n"
- printf "\n"
- fi
-
- if test "x$FOUND_ALT_VARIABLES" != "x"; then
- printf "WARNING: You have old-style ALT_ environment variables set.\n"
- printf "These are not respected, and will be ignored. It is recommended\n"
- printf "that you clean your environment. The following variables are set:\n"
- printf "$FOUND_ALT_VARIABLES\n"
- printf "\n"
- fi
-
- if test "x$OUTPUT_DIR_IS_LOCAL" != "xyes"; then
- printf "WARNING: Your build output directory is not on a local disk.\n"
- printf "This will severely degrade build performance!\n"
- printf "It is recommended that you create an output directory on a local disk,\n"
- printf "and run the configure script again from that directory.\n"
- printf "\n"
- fi
-
- if test "x$IS_RECONFIGURE" = "xyes" && test "x$no_create" != "xyes"; then
- printf "WARNING: The result of this configuration has overridden an older\n"
- printf "configuration. You *should* run 'make clean' to make sure you get a\n"
- printf "proper build. Failure to do so might result in strange build problems.\n"
- printf "\n"
- fi
-
- if test "x$IS_RECONFIGURE" != "xyes" && test "x$no_create" = "xyes"; then
- printf "WARNING: The result of this configuration was not saved.\n"
- printf "You should run without '--no-create | -n' to create the configuration.\n"
- printf "\n"
- fi
-
-
-
- # Locate config.log.
- if test -e "$CONFIGURESUPPORT_OUTPUTDIR/config.log"; then
- CONFIG_LOG_PATH="$CONFIGURESUPPORT_OUTPUTDIR"
- elif test -e "./config.log"; then
- CONFIG_LOG_PATH="."
- fi
-
- if test -e "$CONFIG_LOG_PATH/config.log"; then
- $GREP '^configure:.*: WARNING:' "$CONFIG_LOG_PATH/config.log" > /dev/null 2>&1
- if test $? -eq 0; then
- printf "The following warnings were produced. Repeated here for convenience:\n"
- # We must quote sed expression (using []) to stop m4 from eating the [].
- $GREP '^configure:.*: WARNING:' "$CONFIG_LOG_PATH/config.log" | $SED -e 's/^configure:[0-9]*: //'
- printf "\n"
- fi
- fi
-