String getUrl()
       throws SQLException

Retrieves the url property this RowSet object will use to create a connection if it uses the DriverManager instead of a DataSource object to establish the connection. The default value is null.

void setUrl​(String url)
     throws SQLException

Sets the URL this RowSet object will use when it uses the DriverManager to create a connection. Setting this property is optional. If a URL is used, a JDBC driver that accepts the URL must be loaded before the rowset is used to connect to a database. The rowset will use the URL internally to create a database connection when reading or writing data. Either a URL or a data source name is used to create a connection, whichever was set to non null value most recently.

String getDataSourceName()

Retrieves the logical name that identifies the data source for this RowSet object.

void setDataSourceName​(String name)
                throws SQLException

Sets the data source name property for this RowSet object to the given String.

The value of the data source name property can be used to do a lookup of a DataSource object that has been registered with a naming service. After being retrieved, the DataSource object can be used to create a connection to the data source that it represents.

String getUsername()

Retrieves the username used to create a database connection for this RowSet object. The username property is set at run time before calling the method execute. It is not usually part of the serialized state of a RowSet object.

void setUsername​(String name)
          throws SQLException

Sets the username property for this RowSet object to the given String.

String getPassword()

Retrieves the password used to create a database connection. The password property is set at run time before calling the method execute. It is not usually part of the serialized state of a RowSet object.

void setPassword​(String password)
          throws SQLException

Sets the database password for this RowSet object to the given String.

int getTransactionIsolation()

Retrieves the transaction isolation level set for this RowSet object.

void setTransactionIsolation​(int level)
                      throws SQLException

Sets the transaction isolation level for this RowSet object.

Map<String,Class<?>> getTypeMap()
                         throws SQLException

Retrieves the Map object associated with this RowSet object, which specifies the custom mapping of SQL user-defined types, if any. The default is for the type map to be empty.

void setTypeMap​(Map<String,Class<?>> map)
         throws SQLException

Installs the given java.util.Map object as the default type map for this RowSet object. This type map will be used unless another type map is supplied as a method parameter.

String getCommand()

Retrieves this RowSet object's command property. The command property contains a command string, which must be an SQL query, that can be executed to fill the rowset with data. The default value is null.

void setCommand​(String cmd)
         throws SQLException

Sets this RowSet object's command property to the given SQL query. This property is optional when a rowset gets its data from a data source that does not support commands, such as a spreadsheet.

boolean isReadOnly()

Retrieves whether this RowSet object is read-only. If updates are possible, the default is for a rowset to be updatable.

Attempts to update a read-only rowset will result in an SQLException being thrown.

void setReadOnly​(boolean value)
          throws SQLException

Sets whether this RowSet object is read-only to the given boolean.

int getMaxFieldSize()
             throws SQLException

Retrieves the maximum number of bytes that may be returned for certain column values. This limit applies only to BINARY, VARBINARY, LONGVARBINARYBINARY, CHAR, VARCHAR, LONGVARCHAR, NCHAR and NVARCHAR columns. If the limit is exceeded, the excess data is silently discarded.

void setMaxFieldSize​(int max)
              throws SQLException

Sets the maximum number of bytes that can be returned for a column value to the given number of bytes. This limit applies only to BINARY, VARBINARY, LONGVARBINARYBINARY, CHAR, VARCHAR, LONGVARCHAR, NCHAR and NVARCHAR columns. If the limit is exceeded, the excess data is silently discarded. For maximum portability, use values greater than 256.

int getMaxRows()
        throws SQLException

Retrieves the maximum number of rows that this RowSet object can contain. If the limit is exceeded, the excess rows are silently dropped.

void setMaxRows​(int max)
         throws SQLException

Sets the maximum number of rows that this RowSet object can contain to the specified number. If the limit is exceeded, the excess rows are silently dropped.

boolean getEscapeProcessing()
                     throws SQLException

Retrieves whether escape processing is enabled for this RowSet object. If escape scanning is enabled, which is the default, the driver will do escape substitution before sending an SQL statement to the database.

void setEscapeProcessing​(boolean enable)
                  throws SQLException

Sets escape processing for this RowSet object on or off. If escape scanning is on (the default), the driver will do escape substitution before sending an SQL statement to the database.

int getQueryTimeout()
             throws SQLException

Retrieves the maximum number of seconds the driver will wait for a statement to execute. If this limit is exceeded, an SQLException is thrown.

void setQueryTimeout​(int seconds)
              throws SQLException

Sets the maximum time the driver will wait for a statement to execute to the given number of seconds. If this limit is exceeded, an SQLException is thrown.

void setType​(int type)
      throws SQLException

Sets the type of this RowSet object to the given type. This method is used to change the type of a rowset, which is by default read-only and non-scrollable.

void setConcurrency​(int concurrency)
             throws SQLException

Sets the concurrency of this RowSet object to the given concurrency level. This method is used to change the concurrency level of a rowset, which is by default ResultSet.CONCUR_READ_ONLY

void setNull​(int parameterIndex,
             int sqlType)
      throws SQLException

Sets the designated parameter in this RowSet object's SQL command to SQL NULL.

Note: You must specify the parameter's SQL type.

void setNull​(String parameterName,
             int sqlType)
      throws SQLException

Sets the designated parameter to SQL NULL.

Note: You must specify the parameter's SQL type.

void setNull​(int paramIndex,
             int sqlType,
             String typeName)
      throws SQLException

Sets the designated parameter in this RowSet object's SQL command to SQL NULL. This version of the method setNull should be used for SQL user-defined types (UDTs) and REF type parameters. Examples of UDTs include: STRUCT, DISTINCT, JAVA_OBJECT, and named array types.

Note: To be portable, applications must give the SQL type code and the fully qualified SQL type name when specifying a NULL UDT or REF parameter. In the case of a UDT, the name is the type name of the parameter itself. For a REF parameter, the name is the type name of the referenced type. If a JDBC driver does not need the type code or type name information, it may ignore it. Although it is intended for UDT and REF parameters, this method may be used to set a null parameter of any JDBC type. If the parameter does not have a user-defined or REF type, the typeName parameter is ignored.

void setNull​(String parameterName,
             int sqlType,
             String typeName)
      throws SQLException

Sets the designated parameter to SQL NULL. This version of the method setNull should be used for user-defined types and REF type parameters. Examples of user-defined types include: STRUCT, DISTINCT, JAVA_OBJECT, and named array types.

Note: To be portable, applications must give the SQL type code and the fully-qualified SQL type name when specifying a NULL user-defined or REF parameter. In the case of a user-defined type the name is the type name of the parameter itself. For a REF parameter, the name is the type name of the referenced type. If a JDBC driver does not need the type code or type name information, it may ignore it. Although it is intended for user-defined and Ref parameters, this method may be used to set a null parameter of any JDBC type. If the parameter does not have a user-defined or REF type, the given typeName is ignored.

void setBoolean​(int parameterIndex,
                boolean x)
         throws SQLException

Sets the designated parameter in this RowSet object's command to the given Java boolean value. The driver converts this to an SQL BIT value before sending it to the database.

void setBoolean​(String parameterName,
                boolean x)
         throws SQLException

Sets the designated parameter to the given Java boolean value. The driver converts this to an SQL BIT or BOOLEAN value when it sends it to the database.

void setByte​(int parameterIndex,
             byte x)
      throws SQLException

Sets the designated parameter in this RowSet object's command to the given Java byte value. The driver converts this to an SQL TINYINT value before sending it to the database.

void setByte​(String parameterName,
             byte x)
      throws SQLException

Sets the designated parameter to the given Java byte value. The driver converts this to an SQL TINYINT value when it sends it to the database.

void setShort​(int parameterIndex,
              short x)
       throws SQLException

Sets the designated parameter in this RowSet object's command to the given Java short value. The driver converts this to an SQL SMALLINT value before sending it to the database.

void setShort​(String parameterName,
              short x)
       throws SQLException

Sets the designated parameter to the given Java short value. The driver converts this to an SQL SMALLINT value when it sends it to the database.

void setInt​(int parameterIndex,
            int x)
     throws SQLException

Sets the designated parameter in this RowSet object's command to the given Java int value. The driver converts this to an SQL INTEGER value before sending it to the database.

void setInt​(String parameterName,
            int x)
     throws SQLException

Sets the designated parameter to the given Java int value. The driver converts this to an SQL INTEGER value when it sends it to the database.

void setLong​(int parameterIndex,
             long x)
      throws SQLException

Sets the designated parameter in this RowSet object's command to the given Java long value. The driver converts this to an SQL BIGINT value before sending it to the database.

void setLong​(String parameterName,
             long x)
      throws SQLException

Sets the designated parameter to the given Java long value. The driver converts this to an SQL BIGINT value when it sends it to the database.

void setFloat​(int parameterIndex,
              float x)
       throws SQLException

Sets the designated parameter in this RowSet object's command to the given Java float value. The driver converts this to an SQL REAL value before sending it to the database.

void setFloat​(String parameterName,
              float x)
       throws SQLException

Sets the designated parameter to the given Java float value. The driver converts this to an SQL FLOAT value when it sends it to the database.

void setDouble​(int parameterIndex,
               double x)
        throws SQLException

Sets the designated parameter in this RowSet object's command to the given Java double value. The driver converts this to an SQL DOUBLE value before sending it to the database.

void setDouble​(String parameterName,
               double x)
        throws SQLException

Sets the designated parameter to the given Java double value. The driver converts this to an SQL DOUBLE value when it sends it to the database.

void setBigDecimal​(int parameterIndex,
                   BigDecimal x)
            throws SQLException

Sets the designated parameter in this RowSet object's command to the given java.math.BigDecimal value. The driver converts this to an SQL NUMERIC value before sending it to the database.

void setBigDecimal​(String parameterName,
                   BigDecimal x)
            throws SQLException

Sets the designated parameter to the given java.math.BigDecimal value. The driver converts this to an SQL NUMERIC value when it sends it to the database.

void setString​(int parameterIndex,
               String x)
        throws SQLException

Sets the designated parameter in this RowSet object's command to the given Java String value. Before sending it to the database, the driver converts this to an SQL VARCHAR or LONGVARCHAR value, depending on the argument's size relative to the driver's limits on VARCHAR values.

void setString​(String parameterName,
               String x)
        throws SQLException

Sets the designated parameter to the given Java String value. The driver converts this to an SQL VARCHAR or LONGVARCHAR value (depending on the argument's size relative to the driver's limits on VARCHAR values) when it sends it to the database.

void setBytes​(int parameterIndex,
              byte[] x)
       throws SQLException

Sets the designated parameter in this RowSet object's command to the given Java array of byte values. Before sending it to the database, the driver converts this to an SQL VARBINARY or LONGVARBINARY value, depending on the argument's size relative to the driver's limits on VARBINARY values.

void setBytes​(String parameterName,
              byte[] x)
       throws SQLException

Sets the designated parameter to the given Java array of bytes. The driver converts this to an SQL VARBINARY or LONGVARBINARY (depending on the argument's size relative to the driver's limits on VARBINARY values) when it sends it to the database.

void setDate​(int parameterIndex,
             Date x)
      throws SQLException

Sets the designated parameter in this RowSet object's command to the given java.sql.Date value. The driver converts this to an SQL DATE value before sending it to the database, using the default java.util.Calendar to calculate the date.

void setTime​(int parameterIndex,
             Time x)
      throws SQLException

Sets the designated parameter in this RowSet object's command to the given java.sql.Time value. The driver converts this to an SQL TIME value before sending it to the database, using the default java.util.Calendar to calculate it.

void setTimestamp​(int parameterIndex,
                  Timestamp x)
           throws SQLException

Sets the designated parameter in this RowSet object's command to the given java.sql.Timestamp value. The driver converts this to an SQL TIMESTAMP value before sending it to the database, using the default java.util.Calendar to calculate it.

void setTimestamp​(String parameterName,
                  Timestamp x)
           throws SQLException

Sets the designated parameter to the given java.sql.Timestamp value. The driver converts this to an SQL TIMESTAMP value when it sends it to the database.

void setAsciiStream​(int parameterIndex,
                    InputStream x,
                    int length)
             throws SQLException

Sets the designated parameter in this RowSet object's command to the given java.io.InputStream value. It may be more practical to send a very large ASCII value via a java.io.InputStream rather than as a LONGVARCHAR parameter. The driver will read the data from the stream as needed until it reaches end-of-file.

Note: This stream object can either be a standard Java stream object or your own subclass that implements the standard interface.

void setAsciiStream​(String parameterName,
                    InputStream x,
                    int length)
             throws SQLException

Sets the designated parameter to the given input stream, which will have the specified number of bytes. When a very large ASCII value is input to a LONGVARCHAR parameter, it may be more practical to send it via a java.io.InputStream. Data will be read from the stream as needed until end-of-file is reached. The JDBC driver will do any necessary conversion from ASCII to the database char format.

Note: This stream object can either be a standard Java stream object or your own subclass that implements the standard interface.

void setBinaryStream​(int parameterIndex,
                     InputStream x,
                     int length)
              throws SQLException

Sets the designated parameter in this RowSet object's command to the given java.io.InputStream value. It may be more practical to send a very large binary value via a java.io.InputStream rather than as a LONGVARBINARY parameter. The driver will read the data from the stream as needed until it reaches end-of-file.

Note: This stream object can either be a standard Java stream object or your own subclass that implements the standard interface.

void setBinaryStream​(String parameterName,
                     InputStream x,
                     int length)
              throws SQLException

Sets the designated parameter to the given input stream, which will have the specified number of bytes. When a very large binary value is input to a LONGVARBINARY parameter, it may be more practical to send it via a java.io.InputStream object. The data will be read from the stream as needed until end-of-file is reached.

Note: This stream object can either be a standard Java stream object or your own subclass that implements the standard interface.

void setCharacterStream​(int parameterIndex,
                        Reader reader,
                        int length)
                 throws SQLException

Sets the designated parameter in this RowSet object's command to the given java.io.Reader value. It may be more practical to send a very large UNICODE value via a java.io.Reader rather than as a LONGVARCHAR parameter. The driver will read the data from the stream as needed until it reaches end-of-file.

Note: This stream object can either be a standard Java stream object or your own subclass that implements the standard interface.

void setCharacterStream​(String parameterName,
                        Reader reader,
                        int length)
                 throws SQLException

Sets the designated parameter to the given Reader object, which is the given number of characters long. When a very large UNICODE value is input to a LONGVARCHAR parameter, it may be more practical to send it via a java.io.Reader object. The data will be read from the stream as needed until end-of-file is reached. The JDBC driver will do any necessary conversion from UNICODE to the database char format.

Note: This stream object can either be a standard Java stream object or your own subclass that implements the standard interface.

void setAsciiStream​(int parameterIndex,
                    InputStream x)
             throws SQLException

Sets the designated parameter in this RowSet object's command to the given input stream. When a very large ASCII value is input to a LONGVARCHAR parameter, it may be more practical to send it via a java.io.InputStream. Data will be read from the stream as needed until end-of-file is reached. The JDBC driver will do any necessary conversion from ASCII to the database char format.

Note: This stream object can either be a standard Java stream object or your own subclass that implements the standard interface.

Note: Consult your JDBC driver documentation to determine if it might be more efficient to use a version of setAsciiStream which takes a length parameter.

void setAsciiStream​(String parameterName,
                    InputStream x)
             throws SQLException

Sets the designated parameter to the given input stream. When a very large ASCII value is input to a LONGVARCHAR parameter, it may be more practical to send it via a java.io.InputStream. Data will be read from the stream as needed until end-of-file is reached. The JDBC driver will do any necessary conversion from ASCII to the database char format.

Note: This stream object can either be a standard Java stream object or your own subclass that implements the standard interface.

Note: Consult your JDBC driver documentation to determine if it might be more efficient to use a version of setAsciiStream which takes a length parameter.

void setBinaryStream​(int parameterIndex,
                     InputStream x)
              throws SQLException

Sets the designated parameter in this RowSet object's command to the given input stream. When a very large binary value is input to a LONGVARBINARY parameter, it may be more practical to send it via a java.io.InputStream object. The data will be read from the stream as needed until end-of-file is reached.

Note: This stream object can either be a standard Java stream object or your own subclass that implements the standard interface.

Note: Consult your JDBC driver documentation to determine if it might be more efficient to use a version of setBinaryStream which takes a length parameter.

void setBinaryStream​(String parameterName,
                     InputStream x)
              throws SQLException

Sets the designated parameter to the given input stream. When a very large binary value is input to a LONGVARBINARY parameter, it may be more practical to send it via a java.io.InputStream object. The data will be read from the stream as needed until end-of-file is reached.

Note: This stream object can either be a standard Java stream object or your own subclass that implements the standard interface.

Note: Consult your JDBC driver documentation to determine if it might be more efficient to use a version of setBinaryStream which takes a length parameter.

void setCharacterStream​(int parameterIndex,
                        Reader reader)
                 throws SQLException

Sets the designated parameter in this RowSet object's command to the given Reader object. When a very large UNICODE value is input to a LONGVARCHAR parameter, it may be more practical to send it via a java.io.Reader object. The data will be read from the stream as needed until end-of-file is reached. The JDBC driver will do any necessary conversion from UNICODE to the database char format.

Note: This stream object can either be a standard Java stream object or your own subclass that implements the standard interface.

Note: Consult your JDBC driver documentation to determine if it might be more efficient to use a version of setCharacterStream which takes a length parameter.

void setCharacterStream​(String parameterName,
                        Reader reader)
                 throws SQLException

Sets the designated parameter to the given Reader object. When a very large UNICODE value is input to a LONGVARCHAR parameter, it may be more practical to send it via a java.io.Reader object. The data will be read from the stream as needed until end-of-file is reached. The JDBC driver will do any necessary conversion from UNICODE to the database char format.

Note: This stream object can either be a standard Java stream object or your own subclass that implements the standard interface.

Note: Consult your JDBC driver documentation to determine if it might be more efficient to use a version of setCharacterStream which takes a length parameter.

void setNCharacterStream​(int parameterIndex,
                         Reader value)
                  throws SQLException

Sets the designated parameter in this RowSet object's command to a Reader object. The Reader reads the data till end-of-file is reached. The driver does the necessary conversion from Java character format to the national character set in the database.

Note: This stream object can either be a standard Java stream object or your own subclass that implements the standard interface.

Note: Consult your JDBC driver documentation to determine if it might be more efficient to use a version of setNCharacterStream which takes a length parameter.

void setObject​(int parameterIndex,
               Object x,
               int targetSqlType,
               int scaleOrLength)
        throws SQLException

Sets the designated parameter in this RowSet object's command with the given Java Object. For integral values, the java.lang equivalent objects should be used (for example, an instance of the class Integer for an int). If the second argument is an InputStream then the stream must contain the number of bytes specified by scaleOrLength. If the second argument is a Reader then the Reader must contain the number of characters specified by scaleOrLength. If these conditions are not true the driver will generate a SQLException when the prepared statement is executed.

The given Java object will be converted to the targetSqlType before being sent to the database.

If the object is of a class implementing SQLData, the rowset should call the method SQLData.writeSQL to write the object to an SQLOutput data stream. If, on the other hand, the object is of a class implementing Ref, Blob, Clob, NClob, Struct, java.net.URL, or Array, the driver should pass it to the database as a value of the corresponding SQL type.

Note that this method may be used to pass database-specific abstract data types.

void setObject​(String parameterName,
               Object x,
               int targetSqlType,
               int scale)
        throws SQLException

Sets the value of the designated parameter with the given object. The second argument must be an object type; for integral values, the java.lang equivalent objects should be used.

The given Java object will be converted to the given targetSqlType before being sent to the database. If the object has a custom mapping (is of a class implementing the interface SQLData), the JDBC driver should call the method SQLData.writeSQL to write it to the SQL data stream. If, on the other hand, the object is of a class implementing Ref, Blob, Clob, NClob, Struct, java.net.URL, or Array, the driver should pass it to the database as a value of the corresponding SQL type.

Note that this method may be used to pass database- specific abstract data types.

void setObject​(int parameterIndex,
               Object x,
               int targetSqlType)
        throws SQLException

Sets the designated parameter in this RowSet object's command with a Java Object. For integral values, the java.lang equivalent objects should be used. This method is like setObject above, but the scale used is the scale of the second parameter. Scalar values have a scale of zero. Literal values have the scale present in the literal.

Even though it is supported, it is not recommended that this method be called with floating point input values.

void setObject​(String parameterName,
               Object x,
               int targetSqlType)
        throws SQLException

Sets the value of the designated parameter with the given object. This method is like the method setObject above, except that it assumes a scale of zero.

void setObject​(String parameterName,
               Object x)
        throws SQLException

Sets the value of the designated parameter with the given object. The second parameter must be of type Object; therefore, the java.lang equivalent objects should be used for built-in types.

The JDBC specification specifies a standard mapping from Java Object types to SQL types. The given argument will be converted to the corresponding SQL type before being sent to the database.

Note that this method may be used to pass database- specific abstract data types, by using a driver-specific Java type. If the object is of a class implementing the interface SQLData, the JDBC driver should call the method SQLData.writeSQL to write it to the SQL data stream. If, on the other hand, the object is of a class implementing Ref, Blob, Clob, NClob, Struct, java.net.URL, or Array, the driver should pass it to the database as a value of the corresponding SQL type.

This method throws an exception if there is an ambiguity, for example, if the object is of a class implementing more than one of the interfaces named above.

void setObject​(int parameterIndex,
               Object x)
        throws SQLException

Sets the designated parameter in this RowSet object's command with a Java Object. For integral values, the java.lang equivalent objects should be used.

The JDBC specification provides a standard mapping from Java Object types to SQL types. The driver will convert the given Java object to its standard SQL mapping before sending it to the database.

Note that this method may be used to pass database-specific abstract data types by using a driver-specific Java type. If the object is of a class implementing SQLData, the rowset should call the method SQLData.writeSQL to write the object to an SQLOutput data stream. If, on the other hand, the object is of a class implementing Ref, Blob, Clob, NClob, Struct, java.net.URL, or Array, the driver should pass it to the database as a value of the corresponding SQL type.

An exception is thrown if there is an ambiguity, for example, if the object is of a class implementing more than one of these interfaces.

void setRef​(int i,
            Ref x)
     throws SQLException

Sets the designated parameter in this RowSet object's command with the given Ref value. The driver will convert this to the appropriate REF(<structured-type>) value.

void setBlob​(int i,
             Blob x)
      throws SQLException

Sets the designated parameter in this RowSet object's command with the given Blob value. The driver will convert this to the BLOB value that the Blob object represents before sending it to the database.

void setBlob​(int parameterIndex,
             InputStream inputStream,
             long length)
      throws SQLException

Sets the designated parameter to a InputStream object. The InputStream must contain the number of characters specified by length otherwise a SQLException will be generated when the PreparedStatement is executed. This method differs from the setBinaryStream (int, InputStream, int) method because it informs the driver that the parameter value should be sent to the server as a BLOB. When the setBinaryStream method is used, the driver may have to do extra work to determine whether the parameter data should be sent to the server as a LONGVARBINARY or a BLOB

void setBlob​(int parameterIndex,
             InputStream inputStream)
      throws SQLException

Sets the designated parameter to a InputStream object. This method differs from the setBinaryStream (int, InputStream) method because it informs the driver that the parameter value should be sent to the server as a BLOB. When the setBinaryStream method is used, the driver may have to do extra work to determine whether the parameter data should be sent to the server as a LONGVARBINARY or a BLOB

Note: Consult your JDBC driver documentation to determine if it might be more efficient to use a version of setBlob which takes a length parameter.

void setBlob​(String parameterName,
             InputStream inputStream,
             long length)
      throws SQLException

Sets the designated parameter to a InputStream object. The InputStream must contain the number of characters specified by length, otherwise a SQLException will be generated when the CallableStatement is executed. This method differs from the setBinaryStream (int, InputStream, int) method because it informs the driver that the parameter value should be sent to the server as a BLOB. When the setBinaryStream method is used, the driver may have to do extra work to determine whether the parameter data should be sent to the server as a LONGVARBINARY or a BLOB

void setBlob​(String parameterName,
             Blob x)
      throws SQLException

Sets the designated parameter to the given java.sql.Blob object. The driver converts this to an SQL BLOB value when it sends it to the database.

void setBlob​(String parameterName,
             InputStream inputStream)
      throws SQLException

Sets the designated parameter to a InputStream object. This method differs from the setBinaryStream (int, InputStream) method because it informs the driver that the parameter value should be sent to the server as a BLOB. When the setBinaryStream method is used, the driver may have to do extra work to determine whether the parameter data should be send to the server as a LONGVARBINARY or a BLOB

Note: Consult your JDBC driver documentation to determine if it might be more efficient to use a version of setBlob which takes a length parameter.

void setClob​(int i,
             Clob x)
      throws SQLException

Sets the designated parameter in this RowSet object's command with the given Clob value. The driver will convert this to the CLOB value that the Clob object represents before sending it to the database.

void setClob​(int parameterIndex,
             Reader reader,
             long length)
      throws SQLException

Sets the designated parameter to a Reader object. The Reader must contain the number of characters specified by length otherwise a SQLException will be generated when the PreparedStatement is executed. This method differs from the setCharacterStream (int, Reader, int) method because it informs the driver that the parameter value should be sent to the server as a CLOB. When the setCharacterStream method is used, the driver may have to do extra work to determine whether the parameter data should be sent to the server as a LONGVARCHAR or a CLOB

void setClob​(int parameterIndex,
             Reader reader)
      throws SQLException

Sets the designated parameter to a Reader object. This method differs from the setCharacterStream (int, Reader) method because it informs the driver that the parameter value should be sent to the server as a CLOB. When the setCharacterStream method is used, the driver may have to do extra work to determine whether the parameter data should be sent to the server as a LONGVARCHAR or a CLOB

Note: Consult your JDBC driver documentation to determine if it might be more efficient to use a version of setClob which takes a length parameter.

void setClob​(String parameterName,
             Reader reader,
             long length)
      throws SQLException

Sets the designated parameter to a Reader object. The Reader must contain the number of characters specified by length otherwise a SQLException will be generated when the CallableStatement is executed. This method differs from the setCharacterStream (int, Reader, int) method because it informs the driver that the parameter value should be sent to the server as a CLOB. When the setCharacterStream method is used, the driver may have to do extra work to determine whether the parameter data should be send to the server as a LONGVARCHAR or a CLOB

void setClob​(String parameterName,
             Clob x)
      throws SQLException

Sets the designated parameter to the given java.sql.Clob object. The driver converts this to an SQL CLOB value when it sends it to the database.

void setClob​(String parameterName,
             Reader reader)
      throws SQLException

Sets the designated parameter to a Reader object. This method differs from the setCharacterStream (int, Reader) method because it informs the driver that the parameter value should be sent to the server as a CLOB. When the setCharacterStream method is used, the driver may have to do extra work to determine whether the parameter data should be send to the server as a LONGVARCHAR or a CLOB

Note: Consult your JDBC driver documentation to determine if it might be more efficient to use a version of setClob which takes a length parameter.

void setArray​(int i,
              Array x)
       throws SQLException

Sets the designated parameter in this RowSet object's command with the given Array value. The driver will convert this to the ARRAY value that the Array object represents before sending it to the database.

void setDate​(int parameterIndex,
             Date x,
             Calendar cal)
      throws SQLException

Sets the designated parameter in this RowSet object's command with the given java.sql.Date value. The driver will convert this to an SQL DATE value, using the given java.util.Calendar object to calculate the date.

void setDate​(String parameterName,
             Date x)
      throws SQLException

Sets the designated parameter to the given java.sql.Date value using the default time zone of the virtual machine that is running the application. The driver converts this to an SQL DATE value when it sends it to the database.

void setDate​(String parameterName,
             Date x,
             Calendar cal)
      throws SQLException

Sets the designated parameter to the given java.sql.Date value, using the given Calendar object. The driver uses the Calendar object to construct an SQL DATE value, which the driver then sends to the database. With a a Calendar object, the driver can calculate the date taking into account a custom timezone. If no Calendar object is specified, the driver uses the default timezone, which is that of the virtual machine running the application.

void setTime​(int parameterIndex,
             Time x,
             Calendar cal)
      throws SQLException

Sets the designated parameter in this RowSet object's command with the given java.sql.Time value. The driver will convert this to an SQL TIME value, using the given java.util.Calendar object to calculate it, before sending it to the database.

void setTime​(String parameterName,
             Time x)
      throws SQLException

Sets the designated parameter to the given java.sql.Time value. The driver converts this to an SQL TIME value when it sends it to the database.

void setTime​(String parameterName,
             Time x,
             Calendar cal)
      throws SQLException

Sets the designated parameter to the given java.sql.Time value, using the given Calendar object. The driver uses the Calendar object to construct an SQL TIME value, which the driver then sends to the database. With a a Calendar object, the driver can calculate the time taking into account a custom timezone. If no Calendar object is specified, the driver uses the default timezone, which is that of the virtual machine running the application.

void setTimestamp​(int parameterIndex,
                  Timestamp x,
                  Calendar cal)
           throws SQLException

Sets the designated parameter in this RowSet object's command with the given java.sql.Timestamp value. The driver will convert this to an SQL TIMESTAMP value, using the given java.util.Calendar object to calculate it, before sending it to the database.

void setTimestamp​(String parameterName,
                  Timestamp x,
                  Calendar cal)
           throws SQLException

Sets the designated parameter to the given java.sql.Timestamp value, using the given Calendar object. The driver uses the Calendar object to construct an SQL TIMESTAMP value, which the driver then sends to the database. With a a Calendar object, the driver can calculate the timestamp taking into account a custom timezone. If no Calendar object is specified, the driver uses the default timezone, which is that of the virtual machine running the application.

void clearParameters()
              throws SQLException

Clears the parameters set for this RowSet object's command.

In general, parameter values remain in force for repeated use of a RowSet object. Setting a parameter value automatically clears its previous value. However, in some cases it is useful to immediately release the resources used by the current parameter values, which can be done by calling the method clearParameters.

void execute()
      throws SQLException

Fills this RowSet object with data.

The execute method may use the following properties to create a connection for reading data: url, data source name, user name, password, transaction isolation, and type map. The execute method may use the following properties to create a statement to execute a command: command, read only, maximum field size, maximum rows, escape processing, and query timeout.

If the required properties have not been set, an exception is thrown. If this method is successful, the current contents of the rowset are discarded and the rowset's metadata is also (re)set. If there are outstanding updates, they are ignored.

If this RowSet object does not maintain a continuous connection with its source of data, it may use a Reader (a RowSetReader object) to fill itself with data. In this case, a Reader will have been registered with this RowSet object, and the method execute will call on the Reader's readData method as part of its implementation.

void addRowSetListener​(RowSetListener listener)

Registers the given listener so that it will be notified of events that occur on this RowSet object.

void removeRowSetListener​(RowSetListener listener)

Removes the specified listener from the list of components that will be notified when an event occurs on this RowSet object.

void setSQLXML​(int parameterIndex,
               SQLXML xmlObject)
        throws SQLException

Sets the designated parameter to the given java.sql.SQLXML object. The driver converts this to an SQL XML value when it sends it to the database.

void setSQLXML​(String parameterName,
               SQLXML xmlObject)
        throws SQLException

Sets the designated parameter to the given java.sql.SQLXML object. The driver converts this to an SQL XML value when it sends it to the database.

void setRowId​(int parameterIndex,
              RowId x)
       throws SQLException

Sets the designated parameter to the given java.sql.RowId object. The driver converts this to a SQL ROWID value when it sends it to the database

void setRowId​(String parameterName,
              RowId x)
       throws SQLException

Sets the designated parameter to the given java.sql.RowId object. The driver converts this to a SQL ROWID when it sends it to the database.

void setNString​(int parameterIndex,
                String value)
         throws SQLException

Sets the designated parameter to the given String object. The driver converts this to a SQL NCHAR or NVARCHAR or LONGNVARCHAR value (depending on the argument's size relative to the driver's limits on NVARCHAR values) when it sends it to the database.

void setNString​(String parameterName,
                String value)
         throws SQLException

Sets the designated parameter to the given String object. The driver converts this to a SQL NCHAR or NVARCHAR or LONGNVARCHAR

void setNCharacterStream​(int parameterIndex,
                         Reader value,
                         long length)
                  throws SQLException

Sets the designated parameter to a Reader object. The Reader reads the data till end-of-file is reached. The driver does the necessary conversion from Java character format to the national character set in the database.

void setNCharacterStream​(String parameterName,
                         Reader value,
                         long length)
                  throws SQLException

Sets the designated parameter to a Reader object. The Reader reads the data till end-of-file is reached. The driver does the necessary conversion from Java character format to the national character set in the database.

void setNCharacterStream​(String parameterName,
                         Reader value)
                  throws SQLException

Sets the designated parameter to a Reader object. The Reader reads the data till end-of-file is reached. The driver does the necessary conversion from Java character format to the national character set in the database.

Note: This stream object can either be a standard Java stream object or your own subclass that implements the standard interface.

Note: Consult your JDBC driver documentation to determine if it might be more efficient to use a version of setNCharacterStream which takes a length parameter.

void setNClob​(String parameterName,
              NClob value)
       throws SQLException

Sets the designated parameter to a java.sql.NClob object. The object implements the java.sql.NClob interface. This NClob object maps to a SQL NCLOB.

void setNClob​(String parameterName,
              Reader reader,
              long length)
       throws SQLException

Sets the designated parameter to a Reader object. The Reader must contain the number of characters specified by length otherwise a SQLException will be generated when the CallableStatement is executed. This method differs from the setCharacterStream (int, Reader, int) method because it informs the driver that the parameter value should be sent to the server as a NCLOB. When the setCharacterStream method is used, the driver may have to do extra work to determine whether the parameter data should be send to the server as a LONGNVARCHAR or a NCLOB

void setNClob​(String parameterName,
              Reader reader)
       throws SQLException

Sets the designated parameter to a Reader object. This method differs from the setCharacterStream (int, Reader) method because it informs the driver that the parameter value should be sent to the server as a NCLOB. When the setCharacterStream method is used, the driver may have to do extra work to determine whether the parameter data should be send to the server as a LONGNVARCHAR or a NCLOB

Note: Consult your JDBC driver documentation to determine if it might be more efficient to use a version of setNClob which takes a length parameter.

void setNClob​(int parameterIndex,
              Reader reader,
              long length)
       throws SQLException

Sets the designated parameter to a Reader object. The Reader must contain the number of characters specified by length otherwise a SQLException will be generated when the PreparedStatement is executed. This method differs from the setCharacterStream (int, Reader, int) method because it informs the driver that the parameter value should be sent to the server as a NCLOB. When the setCharacterStream method is used, the driver may have to do extra work to determine whether the parameter data should be sent to the server as a LONGNVARCHAR or a NCLOB

void setNClob​(int parameterIndex,
              NClob value)
       throws SQLException

Sets the designated parameter to a java.sql.NClob object. The driver converts this to a SQL NCLOB value when it sends it to the database.

void setNClob​(int parameterIndex,
              Reader reader)
       throws SQLException

Sets the designated parameter to a Reader object. This method differs from the setCharacterStream (int, Reader) method because it informs the driver that the parameter value should be sent to the server as a NCLOB. When the setCharacterStream method is used, the driver may have to do extra work to determine whether the parameter data should be sent to the server as a LONGNVARCHAR or a NCLOB

Note: Consult your JDBC driver documentation to determine if it might be more efficient to use a version of setNClob which takes a length parameter.