1 /* 2 * Copyright (c) 2003, 2011, Oracle and/or its affiliates. All rights reserved. 3 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. 4 * 5 * This code is free software; you can redistribute it and/or modify it 6 * under the terms of the GNU General Public License version 2 only, as 7 * published by the Free Software Foundation. 8 * 9 * This code is distributed in the hope that it will be useful, but WITHOUT 10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License 12 * version 2 for more details (a copy is included in the LICENSE file that 13 * accompanied this code). 14 * 15 * You should have received a copy of the GNU General Public License version 16 * 2 along with this work; if not, write to the Free Software Foundation, 17 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. 18 * 19 * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA 20 * or visit www.oracle.com if you need additional information or have any 21 * questions. 22 * 23 */ 24 25 #include "precompiled.hpp" 26 #include "asm/assembler.hpp" 27 #include "assembler_x86.inline.hpp" 28 #include "interpreter/interpreter.hpp" 29 #include "nativeInst_x86.hpp" 30 #include "oops/instanceOop.hpp" 31 #include "oops/methodOop.hpp" 32 #include "oops/objArrayKlass.hpp" 33 #include "oops/oop.inline.hpp" 34 #include "prims/methodHandles.hpp" 35 #include "runtime/frame.inline.hpp" 36 #include "runtime/handles.inline.hpp" 37 #include "runtime/sharedRuntime.hpp" 38 #include "runtime/stubCodeGenerator.hpp" 39 #include "runtime/stubRoutines.hpp" 40 #include "utilities/top.hpp" 41 #ifdef TARGET_OS_FAMILY_linux 42 # include "thread_linux.inline.hpp" 43 #endif 44 #ifdef TARGET_OS_FAMILY_solaris 45 # include "thread_solaris.inline.hpp" 46 #endif 47 #ifdef TARGET_OS_FAMILY_windows 48 # include "thread_windows.inline.hpp" 49 #endif 50 #ifdef COMPILER2 51 #include "opto/runtime.hpp" 52 #endif 53 54 // Declaration and definition of StubGenerator (no .hpp file). 55 // For a more detailed description of the stub routine structure 56 // see the comment in stubRoutines.hpp 57 58 #define __ _masm-> 59 #define TIMES_OOP (UseCompressedOops ? Address::times_4 : Address::times_8) 60 #define a__ ((Assembler*)_masm)-> 61 62 #ifdef PRODUCT 63 #define BLOCK_COMMENT(str) /* nothing */ 64 #else 65 #define BLOCK_COMMENT(str) __ block_comment(str) 66 #endif 67 68 #define BIND(label) bind(label); BLOCK_COMMENT(#label ":") 69 const int MXCSR_MASK = 0xFFC0; // Mask out any pending exceptions 70 71 // Stub Code definitions 72 73 static address handle_unsafe_access() { 74 JavaThread* thread = JavaThread::current(); 75 address pc = thread->saved_exception_pc(); 76 // pc is the instruction which we must emulate 77 // doing a no-op is fine: return garbage from the load 78 // therefore, compute npc 79 address npc = Assembler::locate_next_instruction(pc); 80 81 // request an async exception 82 thread->set_pending_unsafe_access_error(); 83 84 // return address of next instruction to execute 85 return npc; 86 } 87 88 class StubGenerator: public StubCodeGenerator { 89 private: 90 91 #ifdef PRODUCT 92 #define inc_counter_np(counter) (0) 93 #else 94 void inc_counter_np_(int& counter) { 95 __ incrementl(ExternalAddress((address)&counter)); 96 } 97 #define inc_counter_np(counter) \ 98 BLOCK_COMMENT("inc_counter " #counter); \ 99 inc_counter_np_(counter); 100 #endif 101 102 // Call stubs are used to call Java from C 103 // 104 // Linux Arguments: 105 // c_rarg0: call wrapper address address 106 // c_rarg1: result address 107 // c_rarg2: result type BasicType 108 // c_rarg3: method methodOop 109 // c_rarg4: (interpreter) entry point address 110 // c_rarg5: parameters intptr_t* 111 // 16(rbp): parameter size (in words) int 112 // 24(rbp): thread Thread* 113 // 114 // [ return_from_Java ] <--- rsp 115 // [ argument word n ] 116 // ... 117 // -12 [ argument word 1 ] 118 // -11 [ saved r15 ] <--- rsp_after_call 119 // -10 [ saved r14 ] 120 // -9 [ saved r13 ] 121 // -8 [ saved r12 ] 122 // -7 [ saved rbx ] 123 // -6 [ call wrapper ] 124 // -5 [ result ] 125 // -4 [ result type ] 126 // -3 [ method ] 127 // -2 [ entry point ] 128 // -1 [ parameters ] 129 // 0 [ saved rbp ] <--- rbp 130 // 1 [ return address ] 131 // 2 [ parameter size ] 132 // 3 [ thread ] 133 // 134 // Windows Arguments: 135 // c_rarg0: call wrapper address address 136 // c_rarg1: result address 137 // c_rarg2: result type BasicType 138 // c_rarg3: method methodOop 139 // 48(rbp): (interpreter) entry point address 140 // 56(rbp): parameters intptr_t* 141 // 64(rbp): parameter size (in words) int 142 // 72(rbp): thread Thread* 143 // 144 // [ return_from_Java ] <--- rsp 145 // [ argument word n ] 146 // ... 147 // -8 [ argument word 1 ] 148 // -7 [ saved r15 ] <--- rsp_after_call 149 // -6 [ saved r14 ] 150 // -5 [ saved r13 ] 151 // -4 [ saved r12 ] 152 // -3 [ saved rdi ] 153 // -2 [ saved rsi ] 154 // -1 [ saved rbx ] 155 // 0 [ saved rbp ] <--- rbp 156 // 1 [ return address ] 157 // 2 [ call wrapper ] 158 // 3 [ result ] 159 // 4 [ result type ] 160 // 5 [ method ] 161 // 6 [ entry point ] 162 // 7 [ parameters ] 163 // 8 [ parameter size ] 164 // 9 [ thread ] 165 // 166 // Windows reserves the callers stack space for arguments 1-4. 167 // We spill c_rarg0-c_rarg3 to this space. 168 169 // Call stub stack layout word offsets from rbp 170 enum call_stub_layout { 171 #ifdef _WIN64 172 rsp_after_call_off = -7, 173 r15_off = rsp_after_call_off, 174 r14_off = -6, 175 r13_off = -5, 176 r12_off = -4, 177 rdi_off = -3, 178 rsi_off = -2, 179 rbx_off = -1, 180 rbp_off = 0, 181 retaddr_off = 1, 182 call_wrapper_off = 2, 183 result_off = 3, 184 result_type_off = 4, 185 method_off = 5, 186 entry_point_off = 6, 187 parameters_off = 7, 188 parameter_size_off = 8, 189 thread_off = 9 190 #else 191 rsp_after_call_off = -12, 192 mxcsr_off = rsp_after_call_off, 193 r15_off = -11, 194 r14_off = -10, 195 r13_off = -9, 196 r12_off = -8, 197 rbx_off = -7, 198 call_wrapper_off = -6, 199 result_off = -5, 200 result_type_off = -4, 201 method_off = -3, 202 entry_point_off = -2, 203 parameters_off = -1, 204 rbp_off = 0, 205 retaddr_off = 1, 206 parameter_size_off = 2, 207 thread_off = 3 208 #endif 209 }; 210 211 address generate_call_stub(address& return_address) { 212 assert((int)frame::entry_frame_after_call_words == -(int)rsp_after_call_off + 1 && 213 (int)frame::entry_frame_call_wrapper_offset == (int)call_wrapper_off, 214 "adjust this code"); 215 StubCodeMark mark(this, "StubRoutines", "call_stub"); 216 address start = __ pc(); 217 218 // same as in generate_catch_exception()! 219 const Address rsp_after_call(rbp, rsp_after_call_off * wordSize); 220 221 const Address call_wrapper (rbp, call_wrapper_off * wordSize); 222 const Address result (rbp, result_off * wordSize); 223 const Address result_type (rbp, result_type_off * wordSize); 224 const Address method (rbp, method_off * wordSize); 225 const Address entry_point (rbp, entry_point_off * wordSize); 226 const Address parameters (rbp, parameters_off * wordSize); 227 const Address parameter_size(rbp, parameter_size_off * wordSize); 228 229 // same as in generate_catch_exception()! 230 const Address thread (rbp, thread_off * wordSize); 231 232 const Address r15_save(rbp, r15_off * wordSize); 233 const Address r14_save(rbp, r14_off * wordSize); 234 const Address r13_save(rbp, r13_off * wordSize); 235 const Address r12_save(rbp, r12_off * wordSize); 236 const Address rbx_save(rbp, rbx_off * wordSize); 237 238 // stub code 239 __ enter(); 240 __ subptr(rsp, -rsp_after_call_off * wordSize); 241 242 // save register parameters 243 #ifndef _WIN64 244 __ movptr(parameters, c_rarg5); // parameters 245 __ movptr(entry_point, c_rarg4); // entry_point 246 #endif 247 248 __ movptr(method, c_rarg3); // method 249 __ movl(result_type, c_rarg2); // result type 250 __ movptr(result, c_rarg1); // result 251 __ movptr(call_wrapper, c_rarg0); // call wrapper 252 253 // save regs belonging to calling function 254 __ movptr(rbx_save, rbx); 255 __ movptr(r12_save, r12); 256 __ movptr(r13_save, r13); 257 __ movptr(r14_save, r14); 258 __ movptr(r15_save, r15); 259 260 #ifdef _WIN64 261 const Address rdi_save(rbp, rdi_off * wordSize); 262 const Address rsi_save(rbp, rsi_off * wordSize); 263 264 __ movptr(rsi_save, rsi); 265 __ movptr(rdi_save, rdi); 266 #else 267 const Address mxcsr_save(rbp, mxcsr_off * wordSize); 268 { 269 Label skip_ldmx; 270 __ stmxcsr(mxcsr_save); 271 __ movl(rax, mxcsr_save); 272 __ andl(rax, MXCSR_MASK); // Only check control and mask bits 273 ExternalAddress mxcsr_std(StubRoutines::x86::mxcsr_std()); 274 __ cmp32(rax, mxcsr_std); 275 __ jcc(Assembler::equal, skip_ldmx); 276 __ ldmxcsr(mxcsr_std); 277 __ bind(skip_ldmx); 278 } 279 #endif 280 281 // Load up thread register 282 __ movptr(r15_thread, thread); 283 __ reinit_heapbase(); 284 285 #ifdef ASSERT 286 // make sure we have no pending exceptions 287 { 288 Label L; 289 __ cmpptr(Address(r15_thread, Thread::pending_exception_offset()), (int32_t)NULL_WORD); 290 __ jcc(Assembler::equal, L); 291 __ stop("StubRoutines::call_stub: entered with pending exception"); 292 __ bind(L); 293 } 294 #endif 295 296 // pass parameters if any 297 BLOCK_COMMENT("pass parameters if any"); 298 Label parameters_done; 299 __ movl(c_rarg3, parameter_size); 300 __ testl(c_rarg3, c_rarg3); 301 __ jcc(Assembler::zero, parameters_done); 302 303 Label loop; 304 __ movptr(c_rarg2, parameters); // parameter pointer 305 __ movl(c_rarg1, c_rarg3); // parameter counter is in c_rarg1 306 __ BIND(loop); 307 __ movptr(rax, Address(c_rarg2, 0));// get parameter 308 __ addptr(c_rarg2, wordSize); // advance to next parameter 309 __ decrementl(c_rarg1); // decrement counter 310 __ push(rax); // pass parameter 311 __ jcc(Assembler::notZero, loop); 312 313 // call Java function 314 __ BIND(parameters_done); 315 __ movptr(rbx, method); // get methodOop 316 __ movptr(c_rarg1, entry_point); // get entry_point 317 __ mov(r13, rsp); // set sender sp 318 BLOCK_COMMENT("call Java function"); 319 __ call(c_rarg1); 320 321 BLOCK_COMMENT("call_stub_return_address:"); 322 return_address = __ pc(); 323 324 // store result depending on type (everything that is not 325 // T_OBJECT, T_LONG, T_FLOAT or T_DOUBLE is treated as T_INT) 326 __ movptr(c_rarg0, result); 327 Label is_long, is_float, is_double, exit; 328 __ movl(c_rarg1, result_type); 329 __ cmpl(c_rarg1, T_OBJECT); 330 __ jcc(Assembler::equal, is_long); 331 __ cmpl(c_rarg1, T_LONG); 332 __ jcc(Assembler::equal, is_long); 333 __ cmpl(c_rarg1, T_FLOAT); 334 __ jcc(Assembler::equal, is_float); 335 __ cmpl(c_rarg1, T_DOUBLE); 336 __ jcc(Assembler::equal, is_double); 337 338 // handle T_INT case 339 __ movl(Address(c_rarg0, 0), rax); 340 341 __ BIND(exit); 342 343 // pop parameters 344 __ lea(rsp, rsp_after_call); 345 346 #ifdef ASSERT 347 // verify that threads correspond 348 { 349 Label L, S; 350 __ cmpptr(r15_thread, thread); 351 __ jcc(Assembler::notEqual, S); 352 __ get_thread(rbx); 353 __ cmpptr(r15_thread, rbx); 354 __ jcc(Assembler::equal, L); 355 __ bind(S); 356 __ jcc(Assembler::equal, L); 357 __ stop("StubRoutines::call_stub: threads must correspond"); 358 __ bind(L); 359 } 360 #endif 361 362 // restore regs belonging to calling function 363 __ movptr(r15, r15_save); 364 __ movptr(r14, r14_save); 365 __ movptr(r13, r13_save); 366 __ movptr(r12, r12_save); 367 __ movptr(rbx, rbx_save); 368 369 #ifdef _WIN64 370 __ movptr(rdi, rdi_save); 371 __ movptr(rsi, rsi_save); 372 #else 373 __ ldmxcsr(mxcsr_save); 374 #endif 375 376 // restore rsp 377 __ addptr(rsp, -rsp_after_call_off * wordSize); 378 379 // return 380 __ pop(rbp); 381 __ ret(0); 382 383 // handle return types different from T_INT 384 __ BIND(is_long); 385 __ movq(Address(c_rarg0, 0), rax); 386 __ jmp(exit); 387 388 __ BIND(is_float); 389 __ movflt(Address(c_rarg0, 0), xmm0); 390 __ jmp(exit); 391 392 __ BIND(is_double); 393 __ movdbl(Address(c_rarg0, 0), xmm0); 394 __ jmp(exit); 395 396 return start; 397 } 398 399 // Return point for a Java call if there's an exception thrown in 400 // Java code. The exception is caught and transformed into a 401 // pending exception stored in JavaThread that can be tested from 402 // within the VM. 403 // 404 // Note: Usually the parameters are removed by the callee. In case 405 // of an exception crossing an activation frame boundary, that is 406 // not the case if the callee is compiled code => need to setup the 407 // rsp. 408 // 409 // rax: exception oop 410 411 address generate_catch_exception() { 412 StubCodeMark mark(this, "StubRoutines", "catch_exception"); 413 address start = __ pc(); 414 415 // same as in generate_call_stub(): 416 const Address rsp_after_call(rbp, rsp_after_call_off * wordSize); 417 const Address thread (rbp, thread_off * wordSize); 418 419 #ifdef ASSERT 420 // verify that threads correspond 421 { 422 Label L, S; 423 __ cmpptr(r15_thread, thread); 424 __ jcc(Assembler::notEqual, S); 425 __ get_thread(rbx); 426 __ cmpptr(r15_thread, rbx); 427 __ jcc(Assembler::equal, L); 428 __ bind(S); 429 __ stop("StubRoutines::catch_exception: threads must correspond"); 430 __ bind(L); 431 } 432 #endif 433 434 // set pending exception 435 __ verify_oop(rax); 436 437 __ movptr(Address(r15_thread, Thread::pending_exception_offset()), rax); 438 __ lea(rscratch1, ExternalAddress((address)__FILE__)); 439 __ movptr(Address(r15_thread, Thread::exception_file_offset()), rscratch1); 440 __ movl(Address(r15_thread, Thread::exception_line_offset()), (int) __LINE__); 441 442 // complete return to VM 443 assert(StubRoutines::_call_stub_return_address != NULL, 444 "_call_stub_return_address must have been generated before"); 445 __ jump(RuntimeAddress(StubRoutines::_call_stub_return_address)); 446 447 return start; 448 } 449 450 // Continuation point for runtime calls returning with a pending 451 // exception. The pending exception check happened in the runtime 452 // or native call stub. The pending exception in Thread is 453 // converted into a Java-level exception. 454 // 455 // Contract with Java-level exception handlers: 456 // rax: exception 457 // rdx: throwing pc 458 // 459 // NOTE: At entry of this stub, exception-pc must be on stack !! 460 461 address generate_forward_exception() { 462 StubCodeMark mark(this, "StubRoutines", "forward exception"); 463 address start = __ pc(); 464 465 // Upon entry, the sp points to the return address returning into 466 // Java (interpreted or compiled) code; i.e., the return address 467 // becomes the throwing pc. 468 // 469 // Arguments pushed before the runtime call are still on the stack 470 // but the exception handler will reset the stack pointer -> 471 // ignore them. A potential result in registers can be ignored as 472 // well. 473 474 #ifdef ASSERT 475 // make sure this code is only executed if there is a pending exception 476 { 477 Label L; 478 __ cmpptr(Address(r15_thread, Thread::pending_exception_offset()), (int32_t) NULL); 479 __ jcc(Assembler::notEqual, L); 480 __ stop("StubRoutines::forward exception: no pending exception (1)"); 481 __ bind(L); 482 } 483 #endif 484 485 // compute exception handler into rbx 486 __ movptr(c_rarg0, Address(rsp, 0)); 487 BLOCK_COMMENT("call exception_handler_for_return_address"); 488 __ call_VM_leaf(CAST_FROM_FN_PTR(address, 489 SharedRuntime::exception_handler_for_return_address), 490 r15_thread, c_rarg0); 491 __ mov(rbx, rax); 492 493 // setup rax & rdx, remove return address & clear pending exception 494 __ pop(rdx); 495 __ movptr(rax, Address(r15_thread, Thread::pending_exception_offset())); 496 __ movptr(Address(r15_thread, Thread::pending_exception_offset()), (int32_t)NULL_WORD); 497 498 #ifdef ASSERT 499 // make sure exception is set 500 { 501 Label L; 502 __ testptr(rax, rax); 503 __ jcc(Assembler::notEqual, L); 504 __ stop("StubRoutines::forward exception: no pending exception (2)"); 505 __ bind(L); 506 } 507 #endif 508 509 // continue at exception handler (return address removed) 510 // rax: exception 511 // rbx: exception handler 512 // rdx: throwing pc 513 __ verify_oop(rax); 514 __ jmp(rbx); 515 516 return start; 517 } 518 519 // Support for jint atomic::xchg(jint exchange_value, volatile jint* dest) 520 // 521 // Arguments : 522 // c_rarg0: exchange_value 523 // c_rarg0: dest 524 // 525 // Result: 526 // *dest <- ex, return (orig *dest) 527 address generate_atomic_xchg() { 528 StubCodeMark mark(this, "StubRoutines", "atomic_xchg"); 529 address start = __ pc(); 530 531 __ movl(rax, c_rarg0); // Copy to eax we need a return value anyhow 532 __ xchgl(rax, Address(c_rarg1, 0)); // automatic LOCK 533 __ ret(0); 534 535 return start; 536 } 537 538 // Support for intptr_t atomic::xchg_ptr(intptr_t exchange_value, volatile intptr_t* dest) 539 // 540 // Arguments : 541 // c_rarg0: exchange_value 542 // c_rarg1: dest 543 // 544 // Result: 545 // *dest <- ex, return (orig *dest) 546 address generate_atomic_xchg_ptr() { 547 StubCodeMark mark(this, "StubRoutines", "atomic_xchg_ptr"); 548 address start = __ pc(); 549 550 __ movptr(rax, c_rarg0); // Copy to eax we need a return value anyhow 551 __ xchgptr(rax, Address(c_rarg1, 0)); // automatic LOCK 552 __ ret(0); 553 554 return start; 555 } 556 557 // Support for jint atomic::atomic_cmpxchg(jint exchange_value, volatile jint* dest, 558 // jint compare_value) 559 // 560 // Arguments : 561 // c_rarg0: exchange_value 562 // c_rarg1: dest 563 // c_rarg2: compare_value 564 // 565 // Result: 566 // if ( compare_value == *dest ) { 567 // *dest = exchange_value 568 // return compare_value; 569 // else 570 // return *dest; 571 address generate_atomic_cmpxchg() { 572 StubCodeMark mark(this, "StubRoutines", "atomic_cmpxchg"); 573 address start = __ pc(); 574 575 __ movl(rax, c_rarg2); 576 if ( os::is_MP() ) __ lock(); 577 __ cmpxchgl(c_rarg0, Address(c_rarg1, 0)); 578 __ ret(0); 579 580 return start; 581 } 582 583 // Support for jint atomic::atomic_cmpxchg_long(jlong exchange_value, 584 // volatile jlong* dest, 585 // jlong compare_value) 586 // Arguments : 587 // c_rarg0: exchange_value 588 // c_rarg1: dest 589 // c_rarg2: compare_value 590 // 591 // Result: 592 // if ( compare_value == *dest ) { 593 // *dest = exchange_value 594 // return compare_value; 595 // else 596 // return *dest; 597 address generate_atomic_cmpxchg_long() { 598 StubCodeMark mark(this, "StubRoutines", "atomic_cmpxchg_long"); 599 address start = __ pc(); 600 601 __ movq(rax, c_rarg2); 602 if ( os::is_MP() ) __ lock(); 603 __ cmpxchgq(c_rarg0, Address(c_rarg1, 0)); 604 __ ret(0); 605 606 return start; 607 } 608 609 // Support for jint atomic::add(jint add_value, volatile jint* dest) 610 // 611 // Arguments : 612 // c_rarg0: add_value 613 // c_rarg1: dest 614 // 615 // Result: 616 // *dest += add_value 617 // return *dest; 618 address generate_atomic_add() { 619 StubCodeMark mark(this, "StubRoutines", "atomic_add"); 620 address start = __ pc(); 621 622 __ movl(rax, c_rarg0); 623 if ( os::is_MP() ) __ lock(); 624 __ xaddl(Address(c_rarg1, 0), c_rarg0); 625 __ addl(rax, c_rarg0); 626 __ ret(0); 627 628 return start; 629 } 630 631 // Support for intptr_t atomic::add_ptr(intptr_t add_value, volatile intptr_t* dest) 632 // 633 // Arguments : 634 // c_rarg0: add_value 635 // c_rarg1: dest 636 // 637 // Result: 638 // *dest += add_value 639 // return *dest; 640 address generate_atomic_add_ptr() { 641 StubCodeMark mark(this, "StubRoutines", "atomic_add_ptr"); 642 address start = __ pc(); 643 644 __ movptr(rax, c_rarg0); // Copy to eax we need a return value anyhow 645 if ( os::is_MP() ) __ lock(); 646 __ xaddptr(Address(c_rarg1, 0), c_rarg0); 647 __ addptr(rax, c_rarg0); 648 __ ret(0); 649 650 return start; 651 } 652 653 // Support for intptr_t OrderAccess::fence() 654 // 655 // Arguments : 656 // 657 // Result: 658 address generate_orderaccess_fence() { 659 StubCodeMark mark(this, "StubRoutines", "orderaccess_fence"); 660 address start = __ pc(); 661 __ membar(Assembler::StoreLoad); 662 __ ret(0); 663 664 return start; 665 } 666 667 // Support for intptr_t get_previous_fp() 668 // 669 // This routine is used to find the previous frame pointer for the 670 // caller (current_frame_guess). This is used as part of debugging 671 // ps() is seemingly lost trying to find frames. 672 // This code assumes that caller current_frame_guess) has a frame. 673 address generate_get_previous_fp() { 674 StubCodeMark mark(this, "StubRoutines", "get_previous_fp"); 675 const Address old_fp(rbp, 0); 676 const Address older_fp(rax, 0); 677 address start = __ pc(); 678 679 __ enter(); 680 __ movptr(rax, old_fp); // callers fp 681 __ movptr(rax, older_fp); // the frame for ps() 682 __ pop(rbp); 683 __ ret(0); 684 685 return start; 686 } 687 688 //---------------------------------------------------------------------------------------------------- 689 // Support for void verify_mxcsr() 690 // 691 // This routine is used with -Xcheck:jni to verify that native 692 // JNI code does not return to Java code without restoring the 693 // MXCSR register to our expected state. 694 695 address generate_verify_mxcsr() { 696 StubCodeMark mark(this, "StubRoutines", "verify_mxcsr"); 697 address start = __ pc(); 698 699 const Address mxcsr_save(rsp, 0); 700 701 if (CheckJNICalls) { 702 Label ok_ret; 703 __ push(rax); 704 __ subptr(rsp, wordSize); // allocate a temp location 705 __ stmxcsr(mxcsr_save); 706 __ movl(rax, mxcsr_save); 707 __ andl(rax, MXCSR_MASK); // Only check control and mask bits 708 __ cmpl(rax, *(int *)(StubRoutines::x86::mxcsr_std())); 709 __ jcc(Assembler::equal, ok_ret); 710 711 __ warn("MXCSR changed by native JNI code, use -XX:+RestoreMXCSROnJNICall"); 712 713 __ ldmxcsr(ExternalAddress(StubRoutines::x86::mxcsr_std())); 714 715 __ bind(ok_ret); 716 __ addptr(rsp, wordSize); 717 __ pop(rax); 718 } 719 720 __ ret(0); 721 722 return start; 723 } 724 725 address generate_f2i_fixup() { 726 StubCodeMark mark(this, "StubRoutines", "f2i_fixup"); 727 Address inout(rsp, 5 * wordSize); // return address + 4 saves 728 729 address start = __ pc(); 730 731 Label L; 732 733 __ push(rax); 734 __ push(c_rarg3); 735 __ push(c_rarg2); 736 __ push(c_rarg1); 737 738 __ movl(rax, 0x7f800000); 739 __ xorl(c_rarg3, c_rarg3); 740 __ movl(c_rarg2, inout); 741 __ movl(c_rarg1, c_rarg2); 742 __ andl(c_rarg1, 0x7fffffff); 743 __ cmpl(rax, c_rarg1); // NaN? -> 0 744 __ jcc(Assembler::negative, L); 745 __ testl(c_rarg2, c_rarg2); // signed ? min_jint : max_jint 746 __ movl(c_rarg3, 0x80000000); 747 __ movl(rax, 0x7fffffff); 748 __ cmovl(Assembler::positive, c_rarg3, rax); 749 750 __ bind(L); 751 __ movptr(inout, c_rarg3); 752 753 __ pop(c_rarg1); 754 __ pop(c_rarg2); 755 __ pop(c_rarg3); 756 __ pop(rax); 757 758 __ ret(0); 759 760 return start; 761 } 762 763 address generate_f2l_fixup() { 764 StubCodeMark mark(this, "StubRoutines", "f2l_fixup"); 765 Address inout(rsp, 5 * wordSize); // return address + 4 saves 766 address start = __ pc(); 767 768 Label L; 769 770 __ push(rax); 771 __ push(c_rarg3); 772 __ push(c_rarg2); 773 __ push(c_rarg1); 774 775 __ movl(rax, 0x7f800000); 776 __ xorl(c_rarg3, c_rarg3); 777 __ movl(c_rarg2, inout); 778 __ movl(c_rarg1, c_rarg2); 779 __ andl(c_rarg1, 0x7fffffff); 780 __ cmpl(rax, c_rarg1); // NaN? -> 0 781 __ jcc(Assembler::negative, L); 782 __ testl(c_rarg2, c_rarg2); // signed ? min_jlong : max_jlong 783 __ mov64(c_rarg3, 0x8000000000000000); 784 __ mov64(rax, 0x7fffffffffffffff); 785 __ cmov(Assembler::positive, c_rarg3, rax); 786 787 __ bind(L); 788 __ movptr(inout, c_rarg3); 789 790 __ pop(c_rarg1); 791 __ pop(c_rarg2); 792 __ pop(c_rarg3); 793 __ pop(rax); 794 795 __ ret(0); 796 797 return start; 798 } 799 800 address generate_d2i_fixup() { 801 StubCodeMark mark(this, "StubRoutines", "d2i_fixup"); 802 Address inout(rsp, 6 * wordSize); // return address + 5 saves 803 804 address start = __ pc(); 805 806 Label L; 807 808 __ push(rax); 809 __ push(c_rarg3); 810 __ push(c_rarg2); 811 __ push(c_rarg1); 812 __ push(c_rarg0); 813 814 __ movl(rax, 0x7ff00000); 815 __ movq(c_rarg2, inout); 816 __ movl(c_rarg3, c_rarg2); 817 __ mov(c_rarg1, c_rarg2); 818 __ mov(c_rarg0, c_rarg2); 819 __ negl(c_rarg3); 820 __ shrptr(c_rarg1, 0x20); 821 __ orl(c_rarg3, c_rarg2); 822 __ andl(c_rarg1, 0x7fffffff); 823 __ xorl(c_rarg2, c_rarg2); 824 __ shrl(c_rarg3, 0x1f); 825 __ orl(c_rarg1, c_rarg3); 826 __ cmpl(rax, c_rarg1); 827 __ jcc(Assembler::negative, L); // NaN -> 0 828 __ testptr(c_rarg0, c_rarg0); // signed ? min_jint : max_jint 829 __ movl(c_rarg2, 0x80000000); 830 __ movl(rax, 0x7fffffff); 831 __ cmov(Assembler::positive, c_rarg2, rax); 832 833 __ bind(L); 834 __ movptr(inout, c_rarg2); 835 836 __ pop(c_rarg0); 837 __ pop(c_rarg1); 838 __ pop(c_rarg2); 839 __ pop(c_rarg3); 840 __ pop(rax); 841 842 __ ret(0); 843 844 return start; 845 } 846 847 address generate_d2l_fixup() { 848 StubCodeMark mark(this, "StubRoutines", "d2l_fixup"); 849 Address inout(rsp, 6 * wordSize); // return address + 5 saves 850 851 address start = __ pc(); 852 853 Label L; 854 855 __ push(rax); 856 __ push(c_rarg3); 857 __ push(c_rarg2); 858 __ push(c_rarg1); 859 __ push(c_rarg0); 860 861 __ movl(rax, 0x7ff00000); 862 __ movq(c_rarg2, inout); 863 __ movl(c_rarg3, c_rarg2); 864 __ mov(c_rarg1, c_rarg2); 865 __ mov(c_rarg0, c_rarg2); 866 __ negl(c_rarg3); 867 __ shrptr(c_rarg1, 0x20); 868 __ orl(c_rarg3, c_rarg2); 869 __ andl(c_rarg1, 0x7fffffff); 870 __ xorl(c_rarg2, c_rarg2); 871 __ shrl(c_rarg3, 0x1f); 872 __ orl(c_rarg1, c_rarg3); 873 __ cmpl(rax, c_rarg1); 874 __ jcc(Assembler::negative, L); // NaN -> 0 875 __ testq(c_rarg0, c_rarg0); // signed ? min_jlong : max_jlong 876 __ mov64(c_rarg2, 0x8000000000000000); 877 __ mov64(rax, 0x7fffffffffffffff); 878 __ cmovq(Assembler::positive, c_rarg2, rax); 879 880 __ bind(L); 881 __ movq(inout, c_rarg2); 882 883 __ pop(c_rarg0); 884 __ pop(c_rarg1); 885 __ pop(c_rarg2); 886 __ pop(c_rarg3); 887 __ pop(rax); 888 889 __ ret(0); 890 891 return start; 892 } 893 894 address generate_fp_mask(const char *stub_name, int64_t mask) { 895 __ align(CodeEntryAlignment); 896 StubCodeMark mark(this, "StubRoutines", stub_name); 897 address start = __ pc(); 898 899 __ emit_data64( mask, relocInfo::none ); 900 __ emit_data64( mask, relocInfo::none ); 901 902 return start; 903 } 904 905 // The following routine generates a subroutine to throw an 906 // asynchronous UnknownError when an unsafe access gets a fault that 907 // could not be reasonably prevented by the programmer. (Example: 908 // SIGBUS/OBJERR.) 909 address generate_handler_for_unsafe_access() { 910 StubCodeMark mark(this, "StubRoutines", "handler_for_unsafe_access"); 911 address start = __ pc(); 912 913 __ push(0); // hole for return address-to-be 914 __ pusha(); // push registers 915 Address next_pc(rsp, RegisterImpl::number_of_registers * BytesPerWord); 916 917 __ subptr(rsp, frame::arg_reg_save_area_bytes); 918 BLOCK_COMMENT("call handle_unsafe_access"); 919 __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, handle_unsafe_access))); 920 __ addptr(rsp, frame::arg_reg_save_area_bytes); 921 922 __ movptr(next_pc, rax); // stuff next address 923 __ popa(); 924 __ ret(0); // jump to next address 925 926 return start; 927 } 928 929 // Non-destructive plausibility checks for oops 930 // 931 // Arguments: 932 // all args on stack! 933 // 934 // Stack after saving c_rarg3: 935 // [tos + 0]: saved c_rarg3 936 // [tos + 1]: saved c_rarg2 937 // [tos + 2]: saved r12 (several TemplateTable methods use it) 938 // [tos + 3]: saved flags 939 // [tos + 4]: return address 940 // * [tos + 5]: error message (char*) 941 // * [tos + 6]: object to verify (oop) 942 // * [tos + 7]: saved rax - saved by caller and bashed 943 // * [tos + 8]: saved r10 (rscratch1) - saved by caller 944 // * = popped on exit 945 address generate_verify_oop() { 946 StubCodeMark mark(this, "StubRoutines", "verify_oop"); 947 address start = __ pc(); 948 949 Label exit, error; 950 951 __ pushf(); 952 __ incrementl(ExternalAddress((address) StubRoutines::verify_oop_count_addr())); 953 954 __ push(r12); 955 956 // save c_rarg2 and c_rarg3 957 __ push(c_rarg2); 958 __ push(c_rarg3); 959 960 enum { 961 // After previous pushes. 962 oop_to_verify = 6 * wordSize, 963 saved_rax = 7 * wordSize, 964 saved_r10 = 8 * wordSize, 965 966 // Before the call to MacroAssembler::debug(), see below. 967 return_addr = 16 * wordSize, 968 error_msg = 17 * wordSize 969 }; 970 971 // get object 972 __ movptr(rax, Address(rsp, oop_to_verify)); 973 974 // make sure object is 'reasonable' 975 __ testptr(rax, rax); 976 __ jcc(Assembler::zero, exit); // if obj is NULL it is OK 977 // Check if the oop is in the right area of memory 978 __ movptr(c_rarg2, rax); 979 __ movptr(c_rarg3, (intptr_t) Universe::verify_oop_mask()); 980 __ andptr(c_rarg2, c_rarg3); 981 __ movptr(c_rarg3, (intptr_t) Universe::verify_oop_bits()); 982 __ cmpptr(c_rarg2, c_rarg3); 983 __ jcc(Assembler::notZero, error); 984 985 // set r12 to heapbase for load_klass() 986 __ reinit_heapbase(); 987 988 // make sure klass is 'reasonable' 989 __ load_klass(rax, rax); // get klass 990 __ testptr(rax, rax); 991 __ jcc(Assembler::zero, error); // if klass is NULL it is broken 992 // Check if the klass is in the right area of memory 993 __ mov(c_rarg2, rax); 994 __ movptr(c_rarg3, (intptr_t) Universe::verify_klass_mask()); 995 __ andptr(c_rarg2, c_rarg3); 996 __ movptr(c_rarg3, (intptr_t) Universe::verify_klass_bits()); 997 __ cmpptr(c_rarg2, c_rarg3); 998 __ jcc(Assembler::notZero, error); 999 1000 // make sure klass' klass is 'reasonable' 1001 __ load_klass(rax, rax); 1002 __ testptr(rax, rax); 1003 __ jcc(Assembler::zero, error); // if klass' klass is NULL it is broken 1004 // Check if the klass' klass is in the right area of memory 1005 __ movptr(c_rarg3, (intptr_t) Universe::verify_klass_mask()); 1006 __ andptr(rax, c_rarg3); 1007 __ movptr(c_rarg3, (intptr_t) Universe::verify_klass_bits()); 1008 __ cmpptr(rax, c_rarg3); 1009 __ jcc(Assembler::notZero, error); 1010 1011 // return if everything seems ok 1012 __ bind(exit); 1013 __ movptr(rax, Address(rsp, saved_rax)); // get saved rax back 1014 __ movptr(rscratch1, Address(rsp, saved_r10)); // get saved r10 back 1015 __ pop(c_rarg3); // restore c_rarg3 1016 __ pop(c_rarg2); // restore c_rarg2 1017 __ pop(r12); // restore r12 1018 __ popf(); // restore flags 1019 __ ret(4 * wordSize); // pop caller saved stuff 1020 1021 // handle errors 1022 __ bind(error); 1023 __ movptr(rax, Address(rsp, saved_rax)); // get saved rax back 1024 __ movptr(rscratch1, Address(rsp, saved_r10)); // get saved r10 back 1025 __ pop(c_rarg3); // get saved c_rarg3 back 1026 __ pop(c_rarg2); // get saved c_rarg2 back 1027 __ pop(r12); // get saved r12 back 1028 __ popf(); // get saved flags off stack -- 1029 // will be ignored 1030 1031 __ pusha(); // push registers 1032 // (rip is already 1033 // already pushed) 1034 // debug(char* msg, int64_t pc, int64_t regs[]) 1035 // We've popped the registers we'd saved (c_rarg3, c_rarg2 and flags), and 1036 // pushed all the registers, so now the stack looks like: 1037 // [tos + 0] 16 saved registers 1038 // [tos + 16] return address 1039 // * [tos + 17] error message (char*) 1040 // * [tos + 18] object to verify (oop) 1041 // * [tos + 19] saved rax - saved by caller and bashed 1042 // * [tos + 20] saved r10 (rscratch1) - saved by caller 1043 // * = popped on exit 1044 1045 __ movptr(c_rarg0, Address(rsp, error_msg)); // pass address of error message 1046 __ movptr(c_rarg1, Address(rsp, return_addr)); // pass return address 1047 __ movq(c_rarg2, rsp); // pass address of regs on stack 1048 __ mov(r12, rsp); // remember rsp 1049 __ subptr(rsp, frame::arg_reg_save_area_bytes); // windows 1050 __ andptr(rsp, -16); // align stack as required by ABI 1051 BLOCK_COMMENT("call MacroAssembler::debug"); 1052 __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, MacroAssembler::debug64))); 1053 __ mov(rsp, r12); // restore rsp 1054 __ popa(); // pop registers (includes r12) 1055 __ ret(4 * wordSize); // pop caller saved stuff 1056 1057 return start; 1058 } 1059 1060 // 1061 // Verify that a register contains clean 32-bits positive value 1062 // (high 32-bits are 0) so it could be used in 64-bits shifts. 1063 // 1064 // Input: 1065 // Rint - 32-bits value 1066 // Rtmp - scratch 1067 // 1068 void assert_clean_int(Register Rint, Register Rtmp) { 1069 #ifdef ASSERT 1070 Label L; 1071 assert_different_registers(Rtmp, Rint); 1072 __ movslq(Rtmp, Rint); 1073 __ cmpq(Rtmp, Rint); 1074 __ jcc(Assembler::equal, L); 1075 __ stop("high 32-bits of int value are not 0"); 1076 __ bind(L); 1077 #endif 1078 } 1079 1080 // Generate overlap test for array copy stubs 1081 // 1082 // Input: 1083 // c_rarg0 - from 1084 // c_rarg1 - to 1085 // c_rarg2 - element count 1086 // 1087 // Output: 1088 // rax - &from[element count - 1] 1089 // 1090 void array_overlap_test(address no_overlap_target, Address::ScaleFactor sf) { 1091 assert(no_overlap_target != NULL, "must be generated"); 1092 array_overlap_test(no_overlap_target, NULL, sf); 1093 } 1094 void array_overlap_test(Label& L_no_overlap, Address::ScaleFactor sf) { 1095 array_overlap_test(NULL, &L_no_overlap, sf); 1096 } 1097 void array_overlap_test(address no_overlap_target, Label* NOLp, Address::ScaleFactor sf) { 1098 const Register from = c_rarg0; 1099 const Register to = c_rarg1; 1100 const Register count = c_rarg2; 1101 const Register end_from = rax; 1102 1103 __ cmpptr(to, from); 1104 __ lea(end_from, Address(from, count, sf, 0)); 1105 if (NOLp == NULL) { 1106 ExternalAddress no_overlap(no_overlap_target); 1107 __ jump_cc(Assembler::belowEqual, no_overlap); 1108 __ cmpptr(to, end_from); 1109 __ jump_cc(Assembler::aboveEqual, no_overlap); 1110 } else { 1111 __ jcc(Assembler::belowEqual, (*NOLp)); 1112 __ cmpptr(to, end_from); 1113 __ jcc(Assembler::aboveEqual, (*NOLp)); 1114 } 1115 } 1116 1117 // Shuffle first three arg regs on Windows into Linux/Solaris locations. 1118 // 1119 // Outputs: 1120 // rdi - rcx 1121 // rsi - rdx 1122 // rdx - r8 1123 // rcx - r9 1124 // 1125 // Registers r9 and r10 are used to save rdi and rsi on Windows, which latter 1126 // are non-volatile. r9 and r10 should not be used by the caller. 1127 // 1128 void setup_arg_regs(int nargs = 3) { 1129 const Register saved_rdi = r9; 1130 const Register saved_rsi = r10; 1131 assert(nargs == 3 || nargs == 4, "else fix"); 1132 #ifdef _WIN64 1133 assert(c_rarg0 == rcx && c_rarg1 == rdx && c_rarg2 == r8 && c_rarg3 == r9, 1134 "unexpected argument registers"); 1135 if (nargs >= 4) 1136 __ mov(rax, r9); // r9 is also saved_rdi 1137 __ movptr(saved_rdi, rdi); 1138 __ movptr(saved_rsi, rsi); 1139 __ mov(rdi, rcx); // c_rarg0 1140 __ mov(rsi, rdx); // c_rarg1 1141 __ mov(rdx, r8); // c_rarg2 1142 if (nargs >= 4) 1143 __ mov(rcx, rax); // c_rarg3 (via rax) 1144 #else 1145 assert(c_rarg0 == rdi && c_rarg1 == rsi && c_rarg2 == rdx && c_rarg3 == rcx, 1146 "unexpected argument registers"); 1147 #endif 1148 } 1149 1150 void restore_arg_regs() { 1151 const Register saved_rdi = r9; 1152 const Register saved_rsi = r10; 1153 #ifdef _WIN64 1154 __ movptr(rdi, saved_rdi); 1155 __ movptr(rsi, saved_rsi); 1156 #endif 1157 } 1158 1159 // Generate code for an array write pre barrier 1160 // 1161 // addr - starting address 1162 // count - element count 1163 // tmp - scratch register 1164 // 1165 // Destroy no registers! 1166 // 1167 void gen_write_ref_array_pre_barrier(Register addr, Register count, bool dest_uninitialized) { 1168 BarrierSet* bs = Universe::heap()->barrier_set(); 1169 switch (bs->kind()) { 1170 case BarrierSet::G1SATBCT: 1171 case BarrierSet::G1SATBCTLogging: 1172 // With G1, don't generate the call if we statically know that the target in uninitialized 1173 if (!dest_uninitialized) { 1174 __ pusha(); // push registers 1175 if (count == c_rarg0) { 1176 if (addr == c_rarg1) { 1177 // exactly backwards!! 1178 __ xchgptr(c_rarg1, c_rarg0); 1179 } else { 1180 __ movptr(c_rarg1, count); 1181 __ movptr(c_rarg0, addr); 1182 } 1183 } else { 1184 __ movptr(c_rarg0, addr); 1185 __ movptr(c_rarg1, count); 1186 } 1187 __ call_VM_leaf(CAST_FROM_FN_PTR(address, BarrierSet::static_write_ref_array_pre), 2); 1188 __ popa(); 1189 } 1190 break; 1191 case BarrierSet::CardTableModRef: 1192 case BarrierSet::CardTableExtension: 1193 case BarrierSet::ModRef: 1194 break; 1195 default: 1196 ShouldNotReachHere(); 1197 1198 } 1199 } 1200 1201 // 1202 // Generate code for an array write post barrier 1203 // 1204 // Input: 1205 // start - register containing starting address of destination array 1206 // end - register containing ending address of destination array 1207 // scratch - scratch register 1208 // 1209 // The input registers are overwritten. 1210 // The ending address is inclusive. 1211 void gen_write_ref_array_post_barrier(Register start, Register end, Register scratch) { 1212 assert_different_registers(start, end, scratch); 1213 BarrierSet* bs = Universe::heap()->barrier_set(); 1214 switch (bs->kind()) { 1215 case BarrierSet::G1SATBCT: 1216 case BarrierSet::G1SATBCTLogging: 1217 1218 { 1219 __ pusha(); // push registers (overkill) 1220 // must compute element count unless barrier set interface is changed (other platforms supply count) 1221 assert_different_registers(start, end, scratch); 1222 __ lea(scratch, Address(end, BytesPerHeapOop)); 1223 __ subptr(scratch, start); // subtract start to get #bytes 1224 __ shrptr(scratch, LogBytesPerHeapOop); // convert to element count 1225 __ mov(c_rarg0, start); 1226 __ mov(c_rarg1, scratch); 1227 __ call_VM_leaf(CAST_FROM_FN_PTR(address, BarrierSet::static_write_ref_array_post), 2); 1228 __ popa(); 1229 } 1230 break; 1231 case BarrierSet::CardTableModRef: 1232 case BarrierSet::CardTableExtension: 1233 { 1234 CardTableModRefBS* ct = (CardTableModRefBS*)bs; 1235 assert(sizeof(*ct->byte_map_base) == sizeof(jbyte), "adjust this code"); 1236 1237 Label L_loop; 1238 1239 __ shrptr(start, CardTableModRefBS::card_shift); 1240 __ addptr(end, BytesPerHeapOop); 1241 __ shrptr(end, CardTableModRefBS::card_shift); 1242 __ subptr(end, start); // number of bytes to copy 1243 1244 intptr_t disp = (intptr_t) ct->byte_map_base; 1245 if (__ is_simm32(disp)) { 1246 Address cardtable(noreg, noreg, Address::no_scale, disp); 1247 __ lea(scratch, cardtable); 1248 } else { 1249 ExternalAddress cardtable((address)disp); 1250 __ lea(scratch, cardtable); 1251 } 1252 1253 const Register count = end; // 'end' register contains bytes count now 1254 __ addptr(start, scratch); 1255 __ BIND(L_loop); 1256 __ movb(Address(start, count, Address::times_1), 0); 1257 __ decrement(count); 1258 __ jcc(Assembler::greaterEqual, L_loop); 1259 } 1260 break; 1261 default: 1262 ShouldNotReachHere(); 1263 1264 } 1265 } 1266 1267 1268 // Copy big chunks forward 1269 // 1270 // Inputs: 1271 // end_from - source arrays end address 1272 // end_to - destination array end address 1273 // qword_count - 64-bits element count, negative 1274 // to - scratch 1275 // L_copy_32_bytes - entry label 1276 // L_copy_8_bytes - exit label 1277 // 1278 void copy_32_bytes_forward(Register end_from, Register end_to, 1279 Register qword_count, Register to, 1280 Label& L_copy_32_bytes, Label& L_copy_8_bytes) { 1281 DEBUG_ONLY(__ stop("enter at entry label, not here")); 1282 Label L_loop; 1283 __ align(OptoLoopAlignment); 1284 __ BIND(L_loop); 1285 if(UseUnalignedLoadStores) { 1286 __ movdqu(xmm0, Address(end_from, qword_count, Address::times_8, -24)); 1287 __ movdqu(Address(end_to, qword_count, Address::times_8, -24), xmm0); 1288 __ movdqu(xmm1, Address(end_from, qword_count, Address::times_8, - 8)); 1289 __ movdqu(Address(end_to, qword_count, Address::times_8, - 8), xmm1); 1290 1291 } else { 1292 __ movq(to, Address(end_from, qword_count, Address::times_8, -24)); 1293 __ movq(Address(end_to, qword_count, Address::times_8, -24), to); 1294 __ movq(to, Address(end_from, qword_count, Address::times_8, -16)); 1295 __ movq(Address(end_to, qword_count, Address::times_8, -16), to); 1296 __ movq(to, Address(end_from, qword_count, Address::times_8, - 8)); 1297 __ movq(Address(end_to, qword_count, Address::times_8, - 8), to); 1298 __ movq(to, Address(end_from, qword_count, Address::times_8, - 0)); 1299 __ movq(Address(end_to, qword_count, Address::times_8, - 0), to); 1300 } 1301 __ BIND(L_copy_32_bytes); 1302 __ addptr(qword_count, 4); 1303 __ jcc(Assembler::lessEqual, L_loop); 1304 __ subptr(qword_count, 4); 1305 __ jcc(Assembler::less, L_copy_8_bytes); // Copy trailing qwords 1306 } 1307 1308 1309 // Copy big chunks backward 1310 // 1311 // Inputs: 1312 // from - source arrays address 1313 // dest - destination array address 1314 // qword_count - 64-bits element count 1315 // to - scratch 1316 // L_copy_32_bytes - entry label 1317 // L_copy_8_bytes - exit label 1318 // 1319 void copy_32_bytes_backward(Register from, Register dest, 1320 Register qword_count, Register to, 1321 Label& L_copy_32_bytes, Label& L_copy_8_bytes) { 1322 DEBUG_ONLY(__ stop("enter at entry label, not here")); 1323 Label L_loop; 1324 __ align(OptoLoopAlignment); 1325 __ BIND(L_loop); 1326 if(UseUnalignedLoadStores) { 1327 __ movdqu(xmm0, Address(from, qword_count, Address::times_8, 16)); 1328 __ movdqu(Address(dest, qword_count, Address::times_8, 16), xmm0); 1329 __ movdqu(xmm1, Address(from, qword_count, Address::times_8, 0)); 1330 __ movdqu(Address(dest, qword_count, Address::times_8, 0), xmm1); 1331 1332 } else { 1333 __ movq(to, Address(from, qword_count, Address::times_8, 24)); 1334 __ movq(Address(dest, qword_count, Address::times_8, 24), to); 1335 __ movq(to, Address(from, qword_count, Address::times_8, 16)); 1336 __ movq(Address(dest, qword_count, Address::times_8, 16), to); 1337 __ movq(to, Address(from, qword_count, Address::times_8, 8)); 1338 __ movq(Address(dest, qword_count, Address::times_8, 8), to); 1339 __ movq(to, Address(from, qword_count, Address::times_8, 0)); 1340 __ movq(Address(dest, qword_count, Address::times_8, 0), to); 1341 } 1342 __ BIND(L_copy_32_bytes); 1343 __ subptr(qword_count, 4); 1344 __ jcc(Assembler::greaterEqual, L_loop); 1345 __ addptr(qword_count, 4); 1346 __ jcc(Assembler::greater, L_copy_8_bytes); // Copy trailing qwords 1347 } 1348 1349 1350 // Arguments: 1351 // aligned - true => Input and output aligned on a HeapWord == 8-byte boundary 1352 // ignored 1353 // name - stub name string 1354 // 1355 // Inputs: 1356 // c_rarg0 - source array address 1357 // c_rarg1 - destination array address 1358 // c_rarg2 - element count, treated as ssize_t, can be zero 1359 // 1360 // If 'from' and/or 'to' are aligned on 4-, 2-, or 1-byte boundaries, 1361 // we let the hardware handle it. The one to eight bytes within words, 1362 // dwords or qwords that span cache line boundaries will still be loaded 1363 // and stored atomically. 1364 // 1365 // Side Effects: 1366 // disjoint_byte_copy_entry is set to the no-overlap entry point 1367 // used by generate_conjoint_byte_copy(). 1368 // 1369 address generate_disjoint_byte_copy(bool aligned, address* entry, const char *name) { 1370 __ align(CodeEntryAlignment); 1371 StubCodeMark mark(this, "StubRoutines", name); 1372 address start = __ pc(); 1373 1374 Label L_copy_32_bytes, L_copy_8_bytes, L_copy_4_bytes, L_copy_2_bytes; 1375 Label L_copy_byte, L_exit; 1376 const Register from = rdi; // source array address 1377 const Register to = rsi; // destination array address 1378 const Register count = rdx; // elements count 1379 const Register byte_count = rcx; 1380 const Register qword_count = count; 1381 const Register end_from = from; // source array end address 1382 const Register end_to = to; // destination array end address 1383 // End pointers are inclusive, and if count is not zero they point 1384 // to the last unit copied: end_to[0] := end_from[0] 1385 1386 __ enter(); // required for proper stackwalking of RuntimeStub frame 1387 assert_clean_int(c_rarg2, rax); // Make sure 'count' is clean int. 1388 1389 if (entry != NULL) { 1390 *entry = __ pc(); 1391 // caller can pass a 64-bit byte count here (from Unsafe.copyMemory) 1392 BLOCK_COMMENT("Entry:"); 1393 } 1394 1395 setup_arg_regs(); // from => rdi, to => rsi, count => rdx 1396 // r9 and r10 may be used to save non-volatile registers 1397 1398 // 'from', 'to' and 'count' are now valid 1399 __ movptr(byte_count, count); 1400 __ shrptr(count, 3); // count => qword_count 1401 1402 // Copy from low to high addresses. Use 'to' as scratch. 1403 __ lea(end_from, Address(from, qword_count, Address::times_8, -8)); 1404 __ lea(end_to, Address(to, qword_count, Address::times_8, -8)); 1405 __ negptr(qword_count); // make the count negative 1406 __ jmp(L_copy_32_bytes); 1407 1408 // Copy trailing qwords 1409 __ BIND(L_copy_8_bytes); 1410 __ movq(rax, Address(end_from, qword_count, Address::times_8, 8)); 1411 __ movq(Address(end_to, qword_count, Address::times_8, 8), rax); 1412 __ increment(qword_count); 1413 __ jcc(Assembler::notZero, L_copy_8_bytes); 1414 1415 // Check for and copy trailing dword 1416 __ BIND(L_copy_4_bytes); 1417 __ testl(byte_count, 4); 1418 __ jccb(Assembler::zero, L_copy_2_bytes); 1419 __ movl(rax, Address(end_from, 8)); 1420 __ movl(Address(end_to, 8), rax); 1421 1422 __ addptr(end_from, 4); 1423 __ addptr(end_to, 4); 1424 1425 // Check for and copy trailing word 1426 __ BIND(L_copy_2_bytes); 1427 __ testl(byte_count, 2); 1428 __ jccb(Assembler::zero, L_copy_byte); 1429 __ movw(rax, Address(end_from, 8)); 1430 __ movw(Address(end_to, 8), rax); 1431 1432 __ addptr(end_from, 2); 1433 __ addptr(end_to, 2); 1434 1435 // Check for and copy trailing byte 1436 __ BIND(L_copy_byte); 1437 __ testl(byte_count, 1); 1438 __ jccb(Assembler::zero, L_exit); 1439 __ movb(rax, Address(end_from, 8)); 1440 __ movb(Address(end_to, 8), rax); 1441 1442 __ BIND(L_exit); 1443 inc_counter_np(SharedRuntime::_jbyte_array_copy_ctr); 1444 restore_arg_regs(); 1445 __ xorptr(rax, rax); // return 0 1446 __ leave(); // required for proper stackwalking of RuntimeStub frame 1447 __ ret(0); 1448 1449 // Copy in 32-bytes chunks 1450 copy_32_bytes_forward(end_from, end_to, qword_count, rax, L_copy_32_bytes, L_copy_8_bytes); 1451 __ jmp(L_copy_4_bytes); 1452 1453 return start; 1454 } 1455 1456 // Arguments: 1457 // aligned - true => Input and output aligned on a HeapWord == 8-byte boundary 1458 // ignored 1459 // name - stub name string 1460 // 1461 // Inputs: 1462 // c_rarg0 - source array address 1463 // c_rarg1 - destination array address 1464 // c_rarg2 - element count, treated as ssize_t, can be zero 1465 // 1466 // If 'from' and/or 'to' are aligned on 4-, 2-, or 1-byte boundaries, 1467 // we let the hardware handle it. The one to eight bytes within words, 1468 // dwords or qwords that span cache line boundaries will still be loaded 1469 // and stored atomically. 1470 // 1471 address generate_conjoint_byte_copy(bool aligned, address nooverlap_target, 1472 address* entry, const char *name) { 1473 __ align(CodeEntryAlignment); 1474 StubCodeMark mark(this, "StubRoutines", name); 1475 address start = __ pc(); 1476 1477 Label L_copy_32_bytes, L_copy_8_bytes, L_copy_4_bytes, L_copy_2_bytes; 1478 const Register from = rdi; // source array address 1479 const Register to = rsi; // destination array address 1480 const Register count = rdx; // elements count 1481 const Register byte_count = rcx; 1482 const Register qword_count = count; 1483 1484 __ enter(); // required for proper stackwalking of RuntimeStub frame 1485 assert_clean_int(c_rarg2, rax); // Make sure 'count' is clean int. 1486 1487 if (entry != NULL) { 1488 *entry = __ pc(); 1489 // caller can pass a 64-bit byte count here (from Unsafe.copyMemory) 1490 BLOCK_COMMENT("Entry:"); 1491 } 1492 1493 array_overlap_test(nooverlap_target, Address::times_1); 1494 setup_arg_regs(); // from => rdi, to => rsi, count => rdx 1495 // r9 and r10 may be used to save non-volatile registers 1496 1497 // 'from', 'to' and 'count' are now valid 1498 __ movptr(byte_count, count); 1499 __ shrptr(count, 3); // count => qword_count 1500 1501 // Copy from high to low addresses. 1502 1503 // Check for and copy trailing byte 1504 __ testl(byte_count, 1); 1505 __ jcc(Assembler::zero, L_copy_2_bytes); 1506 __ movb(rax, Address(from, byte_count, Address::times_1, -1)); 1507 __ movb(Address(to, byte_count, Address::times_1, -1), rax); 1508 __ decrement(byte_count); // Adjust for possible trailing word 1509 1510 // Check for and copy trailing word 1511 __ BIND(L_copy_2_bytes); 1512 __ testl(byte_count, 2); 1513 __ jcc(Assembler::zero, L_copy_4_bytes); 1514 __ movw(rax, Address(from, byte_count, Address::times_1, -2)); 1515 __ movw(Address(to, byte_count, Address::times_1, -2), rax); 1516 1517 // Check for and copy trailing dword 1518 __ BIND(L_copy_4_bytes); 1519 __ testl(byte_count, 4); 1520 __ jcc(Assembler::zero, L_copy_32_bytes); 1521 __ movl(rax, Address(from, qword_count, Address::times_8)); 1522 __ movl(Address(to, qword_count, Address::times_8), rax); 1523 __ jmp(L_copy_32_bytes); 1524 1525 // Copy trailing qwords 1526 __ BIND(L_copy_8_bytes); 1527 __ movq(rax, Address(from, qword_count, Address::times_8, -8)); 1528 __ movq(Address(to, qword_count, Address::times_8, -8), rax); 1529 __ decrement(qword_count); 1530 __ jcc(Assembler::notZero, L_copy_8_bytes); 1531 1532 inc_counter_np(SharedRuntime::_jbyte_array_copy_ctr); 1533 restore_arg_regs(); 1534 __ xorptr(rax, rax); // return 0 1535 __ leave(); // required for proper stackwalking of RuntimeStub frame 1536 __ ret(0); 1537 1538 // Copy in 32-bytes chunks 1539 copy_32_bytes_backward(from, to, qword_count, rax, L_copy_32_bytes, L_copy_8_bytes); 1540 1541 inc_counter_np(SharedRuntime::_jbyte_array_copy_ctr); 1542 restore_arg_regs(); 1543 __ xorptr(rax, rax); // return 0 1544 __ leave(); // required for proper stackwalking of RuntimeStub frame 1545 __ ret(0); 1546 1547 return start; 1548 } 1549 1550 // Arguments: 1551 // aligned - true => Input and output aligned on a HeapWord == 8-byte boundary 1552 // ignored 1553 // name - stub name string 1554 // 1555 // Inputs: 1556 // c_rarg0 - source array address 1557 // c_rarg1 - destination array address 1558 // c_rarg2 - element count, treated as ssize_t, can be zero 1559 // 1560 // If 'from' and/or 'to' are aligned on 4- or 2-byte boundaries, we 1561 // let the hardware handle it. The two or four words within dwords 1562 // or qwords that span cache line boundaries will still be loaded 1563 // and stored atomically. 1564 // 1565 // Side Effects: 1566 // disjoint_short_copy_entry is set to the no-overlap entry point 1567 // used by generate_conjoint_short_copy(). 1568 // 1569 address generate_disjoint_short_copy(bool aligned, address *entry, const char *name) { 1570 __ align(CodeEntryAlignment); 1571 StubCodeMark mark(this, "StubRoutines", name); 1572 address start = __ pc(); 1573 1574 Label L_copy_32_bytes, L_copy_8_bytes, L_copy_4_bytes,L_copy_2_bytes,L_exit; 1575 const Register from = rdi; // source array address 1576 const Register to = rsi; // destination array address 1577 const Register count = rdx; // elements count 1578 const Register word_count = rcx; 1579 const Register qword_count = count; 1580 const Register end_from = from; // source array end address 1581 const Register end_to = to; // destination array end address 1582 // End pointers are inclusive, and if count is not zero they point 1583 // to the last unit copied: end_to[0] := end_from[0] 1584 1585 __ enter(); // required for proper stackwalking of RuntimeStub frame 1586 assert_clean_int(c_rarg2, rax); // Make sure 'count' is clean int. 1587 1588 if (entry != NULL) { 1589 *entry = __ pc(); 1590 // caller can pass a 64-bit byte count here (from Unsafe.copyMemory) 1591 BLOCK_COMMENT("Entry:"); 1592 } 1593 1594 setup_arg_regs(); // from => rdi, to => rsi, count => rdx 1595 // r9 and r10 may be used to save non-volatile registers 1596 1597 // 'from', 'to' and 'count' are now valid 1598 __ movptr(word_count, count); 1599 __ shrptr(count, 2); // count => qword_count 1600 1601 // Copy from low to high addresses. Use 'to' as scratch. 1602 __ lea(end_from, Address(from, qword_count, Address::times_8, -8)); 1603 __ lea(end_to, Address(to, qword_count, Address::times_8, -8)); 1604 __ negptr(qword_count); 1605 __ jmp(L_copy_32_bytes); 1606 1607 // Copy trailing qwords 1608 __ BIND(L_copy_8_bytes); 1609 __ movq(rax, Address(end_from, qword_count, Address::times_8, 8)); 1610 __ movq(Address(end_to, qword_count, Address::times_8, 8), rax); 1611 __ increment(qword_count); 1612 __ jcc(Assembler::notZero, L_copy_8_bytes); 1613 1614 // Original 'dest' is trashed, so we can't use it as a 1615 // base register for a possible trailing word copy 1616 1617 // Check for and copy trailing dword 1618 __ BIND(L_copy_4_bytes); 1619 __ testl(word_count, 2); 1620 __ jccb(Assembler::zero, L_copy_2_bytes); 1621 __ movl(rax, Address(end_from, 8)); 1622 __ movl(Address(end_to, 8), rax); 1623 1624 __ addptr(end_from, 4); 1625 __ addptr(end_to, 4); 1626 1627 // Check for and copy trailing word 1628 __ BIND(L_copy_2_bytes); 1629 __ testl(word_count, 1); 1630 __ jccb(Assembler::zero, L_exit); 1631 __ movw(rax, Address(end_from, 8)); 1632 __ movw(Address(end_to, 8), rax); 1633 1634 __ BIND(L_exit); 1635 inc_counter_np(SharedRuntime::_jshort_array_copy_ctr); 1636 restore_arg_regs(); 1637 __ xorptr(rax, rax); // return 0 1638 __ leave(); // required for proper stackwalking of RuntimeStub frame 1639 __ ret(0); 1640 1641 // Copy in 32-bytes chunks 1642 copy_32_bytes_forward(end_from, end_to, qword_count, rax, L_copy_32_bytes, L_copy_8_bytes); 1643 __ jmp(L_copy_4_bytes); 1644 1645 return start; 1646 } 1647 1648 address generate_fill(BasicType t, bool aligned, const char *name) { 1649 __ align(CodeEntryAlignment); 1650 StubCodeMark mark(this, "StubRoutines", name); 1651 address start = __ pc(); 1652 1653 BLOCK_COMMENT("Entry:"); 1654 1655 const Register to = c_rarg0; // source array address 1656 const Register value = c_rarg1; // value 1657 const Register count = c_rarg2; // elements count 1658 1659 __ enter(); // required for proper stackwalking of RuntimeStub frame 1660 1661 __ generate_fill(t, aligned, to, value, count, rax, xmm0); 1662 1663 __ leave(); // required for proper stackwalking of RuntimeStub frame 1664 __ ret(0); 1665 return start; 1666 } 1667 1668 // Arguments: 1669 // aligned - true => Input and output aligned on a HeapWord == 8-byte boundary 1670 // ignored 1671 // name - stub name string 1672 // 1673 // Inputs: 1674 // c_rarg0 - source array address 1675 // c_rarg1 - destination array address 1676 // c_rarg2 - element count, treated as ssize_t, can be zero 1677 // 1678 // If 'from' and/or 'to' are aligned on 4- or 2-byte boundaries, we 1679 // let the hardware handle it. The two or four words within dwords 1680 // or qwords that span cache line boundaries will still be loaded 1681 // and stored atomically. 1682 // 1683 address generate_conjoint_short_copy(bool aligned, address nooverlap_target, 1684 address *entry, const char *name) { 1685 __ align(CodeEntryAlignment); 1686 StubCodeMark mark(this, "StubRoutines", name); 1687 address start = __ pc(); 1688 1689 Label L_copy_32_bytes, L_copy_8_bytes, L_copy_4_bytes; 1690 const Register from = rdi; // source array address 1691 const Register to = rsi; // destination array address 1692 const Register count = rdx; // elements count 1693 const Register word_count = rcx; 1694 const Register qword_count = count; 1695 1696 __ enter(); // required for proper stackwalking of RuntimeStub frame 1697 assert_clean_int(c_rarg2, rax); // Make sure 'count' is clean int. 1698 1699 if (entry != NULL) { 1700 *entry = __ pc(); 1701 // caller can pass a 64-bit byte count here (from Unsafe.copyMemory) 1702 BLOCK_COMMENT("Entry:"); 1703 } 1704 1705 array_overlap_test(nooverlap_target, Address::times_2); 1706 setup_arg_regs(); // from => rdi, to => rsi, count => rdx 1707 // r9 and r10 may be used to save non-volatile registers 1708 1709 // 'from', 'to' and 'count' are now valid 1710 __ movptr(word_count, count); 1711 __ shrptr(count, 2); // count => qword_count 1712 1713 // Copy from high to low addresses. Use 'to' as scratch. 1714 1715 // Check for and copy trailing word 1716 __ testl(word_count, 1); 1717 __ jccb(Assembler::zero, L_copy_4_bytes); 1718 __ movw(rax, Address(from, word_count, Address::times_2, -2)); 1719 __ movw(Address(to, word_count, Address::times_2, -2), rax); 1720 1721 // Check for and copy trailing dword 1722 __ BIND(L_copy_4_bytes); 1723 __ testl(word_count, 2); 1724 __ jcc(Assembler::zero, L_copy_32_bytes); 1725 __ movl(rax, Address(from, qword_count, Address::times_8)); 1726 __ movl(Address(to, qword_count, Address::times_8), rax); 1727 __ jmp(L_copy_32_bytes); 1728 1729 // Copy trailing qwords 1730 __ BIND(L_copy_8_bytes); 1731 __ movq(rax, Address(from, qword_count, Address::times_8, -8)); 1732 __ movq(Address(to, qword_count, Address::times_8, -8), rax); 1733 __ decrement(qword_count); 1734 __ jcc(Assembler::notZero, L_copy_8_bytes); 1735 1736 inc_counter_np(SharedRuntime::_jshort_array_copy_ctr); 1737 restore_arg_regs(); 1738 __ xorptr(rax, rax); // return 0 1739 __ leave(); // required for proper stackwalking of RuntimeStub frame 1740 __ ret(0); 1741 1742 // Copy in 32-bytes chunks 1743 copy_32_bytes_backward(from, to, qword_count, rax, L_copy_32_bytes, L_copy_8_bytes); 1744 1745 inc_counter_np(SharedRuntime::_jshort_array_copy_ctr); 1746 restore_arg_regs(); 1747 __ xorptr(rax, rax); // return 0 1748 __ leave(); // required for proper stackwalking of RuntimeStub frame 1749 __ ret(0); 1750 1751 return start; 1752 } 1753 1754 // Arguments: 1755 // aligned - true => Input and output aligned on a HeapWord == 8-byte boundary 1756 // ignored 1757 // is_oop - true => oop array, so generate store check code 1758 // name - stub name string 1759 // 1760 // Inputs: 1761 // c_rarg0 - source array address 1762 // c_rarg1 - destination array address 1763 // c_rarg2 - element count, treated as ssize_t, can be zero 1764 // 1765 // If 'from' and/or 'to' are aligned on 4-byte boundaries, we let 1766 // the hardware handle it. The two dwords within qwords that span 1767 // cache line boundaries will still be loaded and stored atomicly. 1768 // 1769 // Side Effects: 1770 // disjoint_int_copy_entry is set to the no-overlap entry point 1771 // used by generate_conjoint_int_oop_copy(). 1772 // 1773 address generate_disjoint_int_oop_copy(bool aligned, bool is_oop, address* entry, 1774 const char *name, bool dest_uninitialized = false) { 1775 __ align(CodeEntryAlignment); 1776 StubCodeMark mark(this, "StubRoutines", name); 1777 address start = __ pc(); 1778 1779 Label L_copy_32_bytes, L_copy_8_bytes, L_copy_4_bytes, L_exit; 1780 const Register from = rdi; // source array address 1781 const Register to = rsi; // destination array address 1782 const Register count = rdx; // elements count 1783 const Register dword_count = rcx; 1784 const Register qword_count = count; 1785 const Register end_from = from; // source array end address 1786 const Register end_to = to; // destination array end address 1787 const Register saved_to = r11; // saved destination array address 1788 // End pointers are inclusive, and if count is not zero they point 1789 // to the last unit copied: end_to[0] := end_from[0] 1790 1791 __ enter(); // required for proper stackwalking of RuntimeStub frame 1792 assert_clean_int(c_rarg2, rax); // Make sure 'count' is clean int. 1793 1794 if (entry != NULL) { 1795 *entry = __ pc(); 1796 // caller can pass a 64-bit byte count here (from Unsafe.copyMemory) 1797 BLOCK_COMMENT("Entry:"); 1798 } 1799 1800 setup_arg_regs(); // from => rdi, to => rsi, count => rdx 1801 // r9 and r10 may be used to save non-volatile registers 1802 if (is_oop) { 1803 __ movq(saved_to, to); 1804 gen_write_ref_array_pre_barrier(to, count, dest_uninitialized); 1805 } 1806 1807 // 'from', 'to' and 'count' are now valid 1808 __ movptr(dword_count, count); 1809 __ shrptr(count, 1); // count => qword_count 1810 1811 // Copy from low to high addresses. Use 'to' as scratch. 1812 __ lea(end_from, Address(from, qword_count, Address::times_8, -8)); 1813 __ lea(end_to, Address(to, qword_count, Address::times_8, -8)); 1814 __ negptr(qword_count); 1815 __ jmp(L_copy_32_bytes); 1816 1817 // Copy trailing qwords 1818 __ BIND(L_copy_8_bytes); 1819 __ movq(rax, Address(end_from, qword_count, Address::times_8, 8)); 1820 __ movq(Address(end_to, qword_count, Address::times_8, 8), rax); 1821 __ increment(qword_count); 1822 __ jcc(Assembler::notZero, L_copy_8_bytes); 1823 1824 // Check for and copy trailing dword 1825 __ BIND(L_copy_4_bytes); 1826 __ testl(dword_count, 1); // Only byte test since the value is 0 or 1 1827 __ jccb(Assembler::zero, L_exit); 1828 __ movl(rax, Address(end_from, 8)); 1829 __ movl(Address(end_to, 8), rax); 1830 1831 __ BIND(L_exit); 1832 if (is_oop) { 1833 __ leaq(end_to, Address(saved_to, dword_count, Address::times_4, -4)); 1834 gen_write_ref_array_post_barrier(saved_to, end_to, rax); 1835 } 1836 inc_counter_np(SharedRuntime::_jint_array_copy_ctr); 1837 restore_arg_regs(); 1838 __ xorptr(rax, rax); // return 0 1839 __ leave(); // required for proper stackwalking of RuntimeStub frame 1840 __ ret(0); 1841 1842 // Copy 32-bytes chunks 1843 copy_32_bytes_forward(end_from, end_to, qword_count, rax, L_copy_32_bytes, L_copy_8_bytes); 1844 __ jmp(L_copy_4_bytes); 1845 1846 return start; 1847 } 1848 1849 // Arguments: 1850 // aligned - true => Input and output aligned on a HeapWord == 8-byte boundary 1851 // ignored 1852 // is_oop - true => oop array, so generate store check code 1853 // name - stub name string 1854 // 1855 // Inputs: 1856 // c_rarg0 - source array address 1857 // c_rarg1 - destination array address 1858 // c_rarg2 - element count, treated as ssize_t, can be zero 1859 // 1860 // If 'from' and/or 'to' are aligned on 4-byte boundaries, we let 1861 // the hardware handle it. The two dwords within qwords that span 1862 // cache line boundaries will still be loaded and stored atomicly. 1863 // 1864 address generate_conjoint_int_oop_copy(bool aligned, bool is_oop, address nooverlap_target, 1865 address *entry, const char *name, 1866 bool dest_uninitialized = false) { 1867 __ align(CodeEntryAlignment); 1868 StubCodeMark mark(this, "StubRoutines", name); 1869 address start = __ pc(); 1870 1871 Label L_copy_32_bytes, L_copy_8_bytes, L_copy_2_bytes, L_exit; 1872 const Register from = rdi; // source array address 1873 const Register to = rsi; // destination array address 1874 const Register count = rdx; // elements count 1875 const Register dword_count = rcx; 1876 const Register qword_count = count; 1877 1878 __ enter(); // required for proper stackwalking of RuntimeStub frame 1879 assert_clean_int(c_rarg2, rax); // Make sure 'count' is clean int. 1880 1881 if (entry != NULL) { 1882 *entry = __ pc(); 1883 // caller can pass a 64-bit byte count here (from Unsafe.copyMemory) 1884 BLOCK_COMMENT("Entry:"); 1885 } 1886 1887 array_overlap_test(nooverlap_target, Address::times_4); 1888 setup_arg_regs(); // from => rdi, to => rsi, count => rdx 1889 // r9 and r10 may be used to save non-volatile registers 1890 1891 if (is_oop) { 1892 // no registers are destroyed by this call 1893 gen_write_ref_array_pre_barrier(to, count, dest_uninitialized); 1894 } 1895 1896 assert_clean_int(count, rax); // Make sure 'count' is clean int. 1897 // 'from', 'to' and 'count' are now valid 1898 __ movptr(dword_count, count); 1899 __ shrptr(count, 1); // count => qword_count 1900 1901 // Copy from high to low addresses. Use 'to' as scratch. 1902 1903 // Check for and copy trailing dword 1904 __ testl(dword_count, 1); 1905 __ jcc(Assembler::zero, L_copy_32_bytes); 1906 __ movl(rax, Address(from, dword_count, Address::times_4, -4)); 1907 __ movl(Address(to, dword_count, Address::times_4, -4), rax); 1908 __ jmp(L_copy_32_bytes); 1909 1910 // Copy trailing qwords 1911 __ BIND(L_copy_8_bytes); 1912 __ movq(rax, Address(from, qword_count, Address::times_8, -8)); 1913 __ movq(Address(to, qword_count, Address::times_8, -8), rax); 1914 __ decrement(qword_count); 1915 __ jcc(Assembler::notZero, L_copy_8_bytes); 1916 1917 inc_counter_np(SharedRuntime::_jint_array_copy_ctr); 1918 if (is_oop) { 1919 __ jmp(L_exit); 1920 } 1921 restore_arg_regs(); 1922 __ xorptr(rax, rax); // return 0 1923 __ leave(); // required for proper stackwalking of RuntimeStub frame 1924 __ ret(0); 1925 1926 // Copy in 32-bytes chunks 1927 copy_32_bytes_backward(from, to, qword_count, rax, L_copy_32_bytes, L_copy_8_bytes); 1928 1929 inc_counter_np(SharedRuntime::_jint_array_copy_ctr); 1930 __ bind(L_exit); 1931 if (is_oop) { 1932 Register end_to = rdx; 1933 __ leaq(end_to, Address(to, dword_count, Address::times_4, -4)); 1934 gen_write_ref_array_post_barrier(to, end_to, rax); 1935 } 1936 restore_arg_regs(); 1937 __ xorptr(rax, rax); // return 0 1938 __ leave(); // required for proper stackwalking of RuntimeStub frame 1939 __ ret(0); 1940 1941 return start; 1942 } 1943 1944 // Arguments: 1945 // aligned - true => Input and output aligned on a HeapWord boundary == 8 bytes 1946 // ignored 1947 // is_oop - true => oop array, so generate store check code 1948 // name - stub name string 1949 // 1950 // Inputs: 1951 // c_rarg0 - source array address 1952 // c_rarg1 - destination array address 1953 // c_rarg2 - element count, treated as ssize_t, can be zero 1954 // 1955 // Side Effects: 1956 // disjoint_oop_copy_entry or disjoint_long_copy_entry is set to the 1957 // no-overlap entry point used by generate_conjoint_long_oop_copy(). 1958 // 1959 address generate_disjoint_long_oop_copy(bool aligned, bool is_oop, address *entry, 1960 const char *name, bool dest_uninitialized = false) { 1961 __ align(CodeEntryAlignment); 1962 StubCodeMark mark(this, "StubRoutines", name); 1963 address start = __ pc(); 1964 1965 Label L_copy_32_bytes, L_copy_8_bytes, L_exit; 1966 const Register from = rdi; // source array address 1967 const Register to = rsi; // destination array address 1968 const Register qword_count = rdx; // elements count 1969 const Register end_from = from; // source array end address 1970 const Register end_to = rcx; // destination array end address 1971 const Register saved_to = to; 1972 // End pointers are inclusive, and if count is not zero they point 1973 // to the last unit copied: end_to[0] := end_from[0] 1974 1975 __ enter(); // required for proper stackwalking of RuntimeStub frame 1976 // Save no-overlap entry point for generate_conjoint_long_oop_copy() 1977 assert_clean_int(c_rarg2, rax); // Make sure 'count' is clean int. 1978 1979 if (entry != NULL) { 1980 *entry = __ pc(); 1981 // caller can pass a 64-bit byte count here (from Unsafe.copyMemory) 1982 BLOCK_COMMENT("Entry:"); 1983 } 1984 1985 setup_arg_regs(); // from => rdi, to => rsi, count => rdx 1986 // r9 and r10 may be used to save non-volatile registers 1987 // 'from', 'to' and 'qword_count' are now valid 1988 if (is_oop) { 1989 // no registers are destroyed by this call 1990 gen_write_ref_array_pre_barrier(to, qword_count, dest_uninitialized); 1991 } 1992 1993 // Copy from low to high addresses. Use 'to' as scratch. 1994 __ lea(end_from, Address(from, qword_count, Address::times_8, -8)); 1995 __ lea(end_to, Address(to, qword_count, Address::times_8, -8)); 1996 __ negptr(qword_count); 1997 __ jmp(L_copy_32_bytes); 1998 1999 // Copy trailing qwords 2000 __ BIND(L_copy_8_bytes); 2001 __ movq(rax, Address(end_from, qword_count, Address::times_8, 8)); 2002 __ movq(Address(end_to, qword_count, Address::times_8, 8), rax); 2003 __ increment(qword_count); 2004 __ jcc(Assembler::notZero, L_copy_8_bytes); 2005 2006 if (is_oop) { 2007 __ jmp(L_exit); 2008 } else { 2009 inc_counter_np(SharedRuntime::_jlong_array_copy_ctr); 2010 restore_arg_regs(); 2011 __ xorptr(rax, rax); // return 0 2012 __ leave(); // required for proper stackwalking of RuntimeStub frame 2013 __ ret(0); 2014 } 2015 2016 // Copy 64-byte chunks 2017 copy_32_bytes_forward(end_from, end_to, qword_count, rax, L_copy_32_bytes, L_copy_8_bytes); 2018 2019 if (is_oop) { 2020 __ BIND(L_exit); 2021 gen_write_ref_array_post_barrier(saved_to, end_to, rax); 2022 inc_counter_np(SharedRuntime::_oop_array_copy_ctr); 2023 } else { 2024 inc_counter_np(SharedRuntime::_jlong_array_copy_ctr); 2025 } 2026 restore_arg_regs(); 2027 __ xorptr(rax, rax); // return 0 2028 __ leave(); // required for proper stackwalking of RuntimeStub frame 2029 __ ret(0); 2030 2031 return start; 2032 } 2033 2034 // Arguments: 2035 // aligned - true => Input and output aligned on a HeapWord boundary == 8 bytes 2036 // ignored 2037 // is_oop - true => oop array, so generate store check code 2038 // name - stub name string 2039 // 2040 // Inputs: 2041 // c_rarg0 - source array address 2042 // c_rarg1 - destination array address 2043 // c_rarg2 - element count, treated as ssize_t, can be zero 2044 // 2045 address generate_conjoint_long_oop_copy(bool aligned, bool is_oop, 2046 address nooverlap_target, address *entry, 2047 const char *name, bool dest_uninitialized = false) { 2048 __ align(CodeEntryAlignment); 2049 StubCodeMark mark(this, "StubRoutines", name); 2050 address start = __ pc(); 2051 2052 Label L_copy_32_bytes, L_copy_8_bytes, L_exit; 2053 const Register from = rdi; // source array address 2054 const Register to = rsi; // destination array address 2055 const Register qword_count = rdx; // elements count 2056 const Register saved_count = rcx; 2057 2058 __ enter(); // required for proper stackwalking of RuntimeStub frame 2059 assert_clean_int(c_rarg2, rax); // Make sure 'count' is clean int. 2060 2061 if (entry != NULL) { 2062 *entry = __ pc(); 2063 // caller can pass a 64-bit byte count here (from Unsafe.copyMemory) 2064 BLOCK_COMMENT("Entry:"); 2065 } 2066 2067 array_overlap_test(nooverlap_target, Address::times_8); 2068 setup_arg_regs(); // from => rdi, to => rsi, count => rdx 2069 // r9 and r10 may be used to save non-volatile registers 2070 // 'from', 'to' and 'qword_count' are now valid 2071 if (is_oop) { 2072 // Save to and count for store barrier 2073 __ movptr(saved_count, qword_count); 2074 // No registers are destroyed by this call 2075 gen_write_ref_array_pre_barrier(to, saved_count, dest_uninitialized); 2076 } 2077 2078 __ jmp(L_copy_32_bytes); 2079 2080 // Copy trailing qwords 2081 __ BIND(L_copy_8_bytes); 2082 __ movq(rax, Address(from, qword_count, Address::times_8, -8)); 2083 __ movq(Address(to, qword_count, Address::times_8, -8), rax); 2084 __ decrement(qword_count); 2085 __ jcc(Assembler::notZero, L_copy_8_bytes); 2086 2087 if (is_oop) { 2088 __ jmp(L_exit); 2089 } else { 2090 inc_counter_np(SharedRuntime::_jlong_array_copy_ctr); 2091 restore_arg_regs(); 2092 __ xorptr(rax, rax); // return 0 2093 __ leave(); // required for proper stackwalking of RuntimeStub frame 2094 __ ret(0); 2095 } 2096 2097 // Copy in 32-bytes chunks 2098 copy_32_bytes_backward(from, to, qword_count, rax, L_copy_32_bytes, L_copy_8_bytes); 2099 2100 if (is_oop) { 2101 __ BIND(L_exit); 2102 __ lea(rcx, Address(to, saved_count, Address::times_8, -8)); 2103 gen_write_ref_array_post_barrier(to, rcx, rax); 2104 inc_counter_np(SharedRuntime::_oop_array_copy_ctr); 2105 } else { 2106 inc_counter_np(SharedRuntime::_jlong_array_copy_ctr); 2107 } 2108 restore_arg_regs(); 2109 __ xorptr(rax, rax); // return 0 2110 __ leave(); // required for proper stackwalking of RuntimeStub frame 2111 __ ret(0); 2112 2113 return start; 2114 } 2115 2116 2117 // Helper for generating a dynamic type check. 2118 // Smashes no registers. 2119 void generate_type_check(Register sub_klass, 2120 Register super_check_offset, 2121 Register super_klass, 2122 Label& L_success) { 2123 assert_different_registers(sub_klass, super_check_offset, super_klass); 2124 2125 BLOCK_COMMENT("type_check:"); 2126 2127 Label L_miss; 2128 2129 __ check_klass_subtype_fast_path(sub_klass, super_klass, noreg, &L_success, &L_miss, NULL, 2130 super_check_offset); 2131 __ check_klass_subtype_slow_path(sub_klass, super_klass, noreg, noreg, &L_success, NULL); 2132 2133 // Fall through on failure! 2134 __ BIND(L_miss); 2135 } 2136 2137 // 2138 // Generate checkcasting array copy stub 2139 // 2140 // Input: 2141 // c_rarg0 - source array address 2142 // c_rarg1 - destination array address 2143 // c_rarg2 - element count, treated as ssize_t, can be zero 2144 // c_rarg3 - size_t ckoff (super_check_offset) 2145 // not Win64 2146 // c_rarg4 - oop ckval (super_klass) 2147 // Win64 2148 // rsp+40 - oop ckval (super_klass) 2149 // 2150 // Output: 2151 // rax == 0 - success 2152 // rax == -1^K - failure, where K is partial transfer count 2153 // 2154 address generate_checkcast_copy(const char *name, address *entry, 2155 bool dest_uninitialized = false) { 2156 2157 Label L_load_element, L_store_element, L_do_card_marks, L_done; 2158 2159 // Input registers (after setup_arg_regs) 2160 const Register from = rdi; // source array address 2161 const Register to = rsi; // destination array address 2162 const Register length = rdx; // elements count 2163 const Register ckoff = rcx; // super_check_offset 2164 const Register ckval = r8; // super_klass 2165 2166 // Registers used as temps (r13, r14 are save-on-entry) 2167 const Register end_from = from; // source array end address 2168 const Register end_to = r13; // destination array end address 2169 const Register count = rdx; // -(count_remaining) 2170 const Register r14_length = r14; // saved copy of length 2171 // End pointers are inclusive, and if length is not zero they point 2172 // to the last unit copied: end_to[0] := end_from[0] 2173 2174 const Register rax_oop = rax; // actual oop copied 2175 const Register r11_klass = r11; // oop._klass 2176 2177 //--------------------------------------------------------------- 2178 // Assembler stub will be used for this call to arraycopy 2179 // if the two arrays are subtypes of Object[] but the 2180 // destination array type is not equal to or a supertype 2181 // of the source type. Each element must be separately 2182 // checked. 2183 2184 __ align(CodeEntryAlignment); 2185 StubCodeMark mark(this, "StubRoutines", name); 2186 address start = __ pc(); 2187 2188 __ enter(); // required for proper stackwalking of RuntimeStub frame 2189 2190 #ifdef ASSERT 2191 // caller guarantees that the arrays really are different 2192 // otherwise, we would have to make conjoint checks 2193 { Label L; 2194 array_overlap_test(L, TIMES_OOP); 2195 __ stop("checkcast_copy within a single array"); 2196 __ bind(L); 2197 } 2198 #endif //ASSERT 2199 2200 setup_arg_regs(4); // from => rdi, to => rsi, length => rdx 2201 // ckoff => rcx, ckval => r8 2202 // r9 and r10 may be used to save non-volatile registers 2203 #ifdef _WIN64 2204 // last argument (#4) is on stack on Win64 2205 __ movptr(ckval, Address(rsp, 6 * wordSize)); 2206 #endif 2207 2208 // Caller of this entry point must set up the argument registers. 2209 if (entry != NULL) { 2210 *entry = __ pc(); 2211 BLOCK_COMMENT("Entry:"); 2212 } 2213 2214 // allocate spill slots for r13, r14 2215 enum { 2216 saved_r13_offset, 2217 saved_r14_offset, 2218 saved_rbp_offset 2219 }; 2220 __ subptr(rsp, saved_rbp_offset * wordSize); 2221 __ movptr(Address(rsp, saved_r13_offset * wordSize), r13); 2222 __ movptr(Address(rsp, saved_r14_offset * wordSize), r14); 2223 2224 // check that int operands are properly extended to size_t 2225 assert_clean_int(length, rax); 2226 assert_clean_int(ckoff, rax); 2227 2228 #ifdef ASSERT 2229 BLOCK_COMMENT("assert consistent ckoff/ckval"); 2230 // The ckoff and ckval must be mutually consistent, 2231 // even though caller generates both. 2232 { Label L; 2233 int sco_offset = (klassOopDesc::header_size() * HeapWordSize + 2234 Klass::super_check_offset_offset_in_bytes()); 2235 __ cmpl(ckoff, Address(ckval, sco_offset)); 2236 __ jcc(Assembler::equal, L); 2237 __ stop("super_check_offset inconsistent"); 2238 __ bind(L); 2239 } 2240 #endif //ASSERT 2241 2242 // Loop-invariant addresses. They are exclusive end pointers. 2243 Address end_from_addr(from, length, TIMES_OOP, 0); 2244 Address end_to_addr(to, length, TIMES_OOP, 0); 2245 // Loop-variant addresses. They assume post-incremented count < 0. 2246 Address from_element_addr(end_from, count, TIMES_OOP, 0); 2247 Address to_element_addr(end_to, count, TIMES_OOP, 0); 2248 2249 gen_write_ref_array_pre_barrier(to, count, dest_uninitialized); 2250 2251 // Copy from low to high addresses, indexed from the end of each array. 2252 __ lea(end_from, end_from_addr); 2253 __ lea(end_to, end_to_addr); 2254 __ movptr(r14_length, length); // save a copy of the length 2255 assert(length == count, ""); // else fix next line: 2256 __ negptr(count); // negate and test the length 2257 __ jcc(Assembler::notZero, L_load_element); 2258 2259 // Empty array: Nothing to do. 2260 __ xorptr(rax, rax); // return 0 on (trivial) success 2261 __ jmp(L_done); 2262 2263 // ======== begin loop ======== 2264 // (Loop is rotated; its entry is L_load_element.) 2265 // Loop control: 2266 // for (count = -count; count != 0; count++) 2267 // Base pointers src, dst are biased by 8*(count-1),to last element. 2268 __ align(OptoLoopAlignment); 2269 2270 __ BIND(L_store_element); 2271 __ store_heap_oop(to_element_addr, rax_oop); // store the oop 2272 __ increment(count); // increment the count toward zero 2273 __ jcc(Assembler::zero, L_do_card_marks); 2274 2275 // ======== loop entry is here ======== 2276 __ BIND(L_load_element); 2277 __ load_heap_oop(rax_oop, from_element_addr); // load the oop 2278 __ testptr(rax_oop, rax_oop); 2279 __ jcc(Assembler::zero, L_store_element); 2280 2281 __ load_klass(r11_klass, rax_oop);// query the object klass 2282 generate_type_check(r11_klass, ckoff, ckval, L_store_element); 2283 // ======== end loop ======== 2284 2285 // It was a real error; we must depend on the caller to finish the job. 2286 // Register rdx = -1 * number of *remaining* oops, r14 = *total* oops. 2287 // Emit GC store barriers for the oops we have copied (r14 + rdx), 2288 // and report their number to the caller. 2289 assert_different_registers(rax, r14_length, count, to, end_to, rcx); 2290 __ lea(end_to, to_element_addr); 2291 __ addptr(end_to, -heapOopSize); // make an inclusive end pointer 2292 gen_write_ref_array_post_barrier(to, end_to, rscratch1); 2293 __ movptr(rax, r14_length); // original oops 2294 __ addptr(rax, count); // K = (original - remaining) oops 2295 __ notptr(rax); // report (-1^K) to caller 2296 __ jmp(L_done); 2297 2298 // Come here on success only. 2299 __ BIND(L_do_card_marks); 2300 __ addptr(end_to, -heapOopSize); // make an inclusive end pointer 2301 gen_write_ref_array_post_barrier(to, end_to, rscratch1); 2302 __ xorptr(rax, rax); // return 0 on success 2303 2304 // Common exit point (success or failure). 2305 __ BIND(L_done); 2306 __ movptr(r13, Address(rsp, saved_r13_offset * wordSize)); 2307 __ movptr(r14, Address(rsp, saved_r14_offset * wordSize)); 2308 inc_counter_np(SharedRuntime::_checkcast_array_copy_ctr); 2309 restore_arg_regs(); 2310 __ leave(); // required for proper stackwalking of RuntimeStub frame 2311 __ ret(0); 2312 2313 return start; 2314 } 2315 2316 // 2317 // Generate 'unsafe' array copy stub 2318 // Though just as safe as the other stubs, it takes an unscaled 2319 // size_t argument instead of an element count. 2320 // 2321 // Input: 2322 // c_rarg0 - source array address 2323 // c_rarg1 - destination array address 2324 // c_rarg2 - byte count, treated as ssize_t, can be zero 2325 // 2326 // Examines the alignment of the operands and dispatches 2327 // to a long, int, short, or byte copy loop. 2328 // 2329 address generate_unsafe_copy(const char *name, 2330 address byte_copy_entry, address short_copy_entry, 2331 address int_copy_entry, address long_copy_entry) { 2332 2333 Label L_long_aligned, L_int_aligned, L_short_aligned; 2334 2335 // Input registers (before setup_arg_regs) 2336 const Register from = c_rarg0; // source array address 2337 const Register to = c_rarg1; // destination array address 2338 const Register size = c_rarg2; // byte count (size_t) 2339 2340 // Register used as a temp 2341 const Register bits = rax; // test copy of low bits 2342 2343 __ align(CodeEntryAlignment); 2344 StubCodeMark mark(this, "StubRoutines", name); 2345 address start = __ pc(); 2346 2347 __ enter(); // required for proper stackwalking of RuntimeStub frame 2348 2349 // bump this on entry, not on exit: 2350 inc_counter_np(SharedRuntime::_unsafe_array_copy_ctr); 2351 2352 __ mov(bits, from); 2353 __ orptr(bits, to); 2354 __ orptr(bits, size); 2355 2356 __ testb(bits, BytesPerLong-1); 2357 __ jccb(Assembler::zero, L_long_aligned); 2358 2359 __ testb(bits, BytesPerInt-1); 2360 __ jccb(Assembler::zero, L_int_aligned); 2361 2362 __ testb(bits, BytesPerShort-1); 2363 __ jump_cc(Assembler::notZero, RuntimeAddress(byte_copy_entry)); 2364 2365 __ BIND(L_short_aligned); 2366 __ shrptr(size, LogBytesPerShort); // size => short_count 2367 __ jump(RuntimeAddress(short_copy_entry)); 2368 2369 __ BIND(L_int_aligned); 2370 __ shrptr(size, LogBytesPerInt); // size => int_count 2371 __ jump(RuntimeAddress(int_copy_entry)); 2372 2373 __ BIND(L_long_aligned); 2374 __ shrptr(size, LogBytesPerLong); // size => qword_count 2375 __ jump(RuntimeAddress(long_copy_entry)); 2376 2377 return start; 2378 } 2379 2380 // Perform range checks on the proposed arraycopy. 2381 // Kills temp, but nothing else. 2382 // Also, clean the sign bits of src_pos and dst_pos. 2383 void arraycopy_range_checks(Register src, // source array oop (c_rarg0) 2384 Register src_pos, // source position (c_rarg1) 2385 Register dst, // destination array oo (c_rarg2) 2386 Register dst_pos, // destination position (c_rarg3) 2387 Register length, 2388 Register temp, 2389 Label& L_failed) { 2390 BLOCK_COMMENT("arraycopy_range_checks:"); 2391 2392 // if (src_pos + length > arrayOop(src)->length()) FAIL; 2393 __ movl(temp, length); 2394 __ addl(temp, src_pos); // src_pos + length 2395 __ cmpl(temp, Address(src, arrayOopDesc::length_offset_in_bytes())); 2396 __ jcc(Assembler::above, L_failed); 2397 2398 // if (dst_pos + length > arrayOop(dst)->length()) FAIL; 2399 __ movl(temp, length); 2400 __ addl(temp, dst_pos); // dst_pos + length 2401 __ cmpl(temp, Address(dst, arrayOopDesc::length_offset_in_bytes())); 2402 __ jcc(Assembler::above, L_failed); 2403 2404 // Have to clean up high 32-bits of 'src_pos' and 'dst_pos'. 2405 // Move with sign extension can be used since they are positive. 2406 __ movslq(src_pos, src_pos); 2407 __ movslq(dst_pos, dst_pos); 2408 2409 BLOCK_COMMENT("arraycopy_range_checks done"); 2410 } 2411 2412 // 2413 // Generate generic array copy stubs 2414 // 2415 // Input: 2416 // c_rarg0 - src oop 2417 // c_rarg1 - src_pos (32-bits) 2418 // c_rarg2 - dst oop 2419 // c_rarg3 - dst_pos (32-bits) 2420 // not Win64 2421 // c_rarg4 - element count (32-bits) 2422 // Win64 2423 // rsp+40 - element count (32-bits) 2424 // 2425 // Output: 2426 // rax == 0 - success 2427 // rax == -1^K - failure, where K is partial transfer count 2428 // 2429 address generate_generic_copy(const char *name, 2430 address byte_copy_entry, address short_copy_entry, 2431 address int_copy_entry, address long_copy_entry, 2432 address oop_copy_entry, address checkcast_copy_entry) { 2433 2434 Label L_failed, L_failed_0, L_objArray; 2435 Label L_copy_bytes, L_copy_shorts, L_copy_ints, L_copy_longs; 2436 2437 // Input registers 2438 const Register src = c_rarg0; // source array oop 2439 const Register src_pos = c_rarg1; // source position 2440 const Register dst = c_rarg2; // destination array oop 2441 const Register dst_pos = c_rarg3; // destination position 2442 #ifndef _WIN64 2443 const Register length = c_rarg4; 2444 #else 2445 const Address length(rsp, 6 * wordSize); // elements count is on stack on Win64 2446 #endif 2447 2448 { int modulus = CodeEntryAlignment; 2449 int target = modulus - 5; // 5 = sizeof jmp(L_failed) 2450 int advance = target - (__ offset() % modulus); 2451 if (advance < 0) advance += modulus; 2452 if (advance > 0) __ nop(advance); 2453 } 2454 StubCodeMark mark(this, "StubRoutines", name); 2455 2456 // Short-hop target to L_failed. Makes for denser prologue code. 2457 __ BIND(L_failed_0); 2458 __ jmp(L_failed); 2459 assert(__ offset() % CodeEntryAlignment == 0, "no further alignment needed"); 2460 2461 __ align(CodeEntryAlignment); 2462 address start = __ pc(); 2463 2464 __ enter(); // required for proper stackwalking of RuntimeStub frame 2465 2466 // bump this on entry, not on exit: 2467 inc_counter_np(SharedRuntime::_generic_array_copy_ctr); 2468 2469 //----------------------------------------------------------------------- 2470 // Assembler stub will be used for this call to arraycopy 2471 // if the following conditions are met: 2472 // 2473 // (1) src and dst must not be null. 2474 // (2) src_pos must not be negative. 2475 // (3) dst_pos must not be negative. 2476 // (4) length must not be negative. 2477 // (5) src klass and dst klass should be the same and not NULL. 2478 // (6) src and dst should be arrays. 2479 // (7) src_pos + length must not exceed length of src. 2480 // (8) dst_pos + length must not exceed length of dst. 2481 // 2482 2483 // if (src == NULL) return -1; 2484 __ testptr(src, src); // src oop 2485 size_t j1off = __ offset(); 2486 __ jccb(Assembler::zero, L_failed_0); 2487 2488 // if (src_pos < 0) return -1; 2489 __ testl(src_pos, src_pos); // src_pos (32-bits) 2490 __ jccb(Assembler::negative, L_failed_0); 2491 2492 // if (dst == NULL) return -1; 2493 __ testptr(dst, dst); // dst oop 2494 __ jccb(Assembler::zero, L_failed_0); 2495 2496 // if (dst_pos < 0) return -1; 2497 __ testl(dst_pos, dst_pos); // dst_pos (32-bits) 2498 size_t j4off = __ offset(); 2499 __ jccb(Assembler::negative, L_failed_0); 2500 2501 // The first four tests are very dense code, 2502 // but not quite dense enough to put four 2503 // jumps in a 16-byte instruction fetch buffer. 2504 // That's good, because some branch predicters 2505 // do not like jumps so close together. 2506 // Make sure of this. 2507 guarantee(((j1off ^ j4off) & ~15) != 0, "I$ line of 1st & 4th jumps"); 2508 2509 // registers used as temp 2510 const Register r11_length = r11; // elements count to copy 2511 const Register r10_src_klass = r10; // array klass 2512 2513 // if (length < 0) return -1; 2514 __ movl(r11_length, length); // length (elements count, 32-bits value) 2515 __ testl(r11_length, r11_length); 2516 __ jccb(Assembler::negative, L_failed_0); 2517 2518 __ load_klass(r10_src_klass, src); 2519 #ifdef ASSERT 2520 // assert(src->klass() != NULL); 2521 { 2522 BLOCK_COMMENT("assert klasses not null {"); 2523 Label L1, L2; 2524 __ testptr(r10_src_klass, r10_src_klass); 2525 __ jcc(Assembler::notZero, L2); // it is broken if klass is NULL 2526 __ bind(L1); 2527 __ stop("broken null klass"); 2528 __ bind(L2); 2529 __ load_klass(rax, dst); 2530 __ cmpq(rax, 0); 2531 __ jcc(Assembler::equal, L1); // this would be broken also 2532 BLOCK_COMMENT("} assert klasses not null done"); 2533 } 2534 #endif 2535 2536 // Load layout helper (32-bits) 2537 // 2538 // |array_tag| | header_size | element_type | |log2_element_size| 2539 // 32 30 24 16 8 2 0 2540 // 2541 // array_tag: typeArray = 0x3, objArray = 0x2, non-array = 0x0 2542 // 2543 2544 const int lh_offset = klassOopDesc::header_size() * HeapWordSize + 2545 Klass::layout_helper_offset_in_bytes(); 2546 2547 // Handle objArrays completely differently... 2548 const jint objArray_lh = Klass::array_layout_helper(T_OBJECT); 2549 __ cmpl(Address(r10_src_klass, lh_offset), objArray_lh); 2550 __ jcc(Assembler::equal, L_objArray); 2551 2552 // if (src->klass() != dst->klass()) return -1; 2553 __ load_klass(rax, dst); 2554 __ cmpq(r10_src_klass, rax); 2555 __ jcc(Assembler::notEqual, L_failed); 2556 2557 const Register rax_lh = rax; // layout helper 2558 __ movl(rax_lh, Address(r10_src_klass, lh_offset)); 2559 2560 // if (!src->is_Array()) return -1; 2561 __ cmpl(rax_lh, Klass::_lh_neutral_value); 2562 __ jcc(Assembler::greaterEqual, L_failed); 2563 2564 // At this point, it is known to be a typeArray (array_tag 0x3). 2565 #ifdef ASSERT 2566 { 2567 BLOCK_COMMENT("assert primitive array {"); 2568 Label L; 2569 __ cmpl(rax_lh, (Klass::_lh_array_tag_type_value << Klass::_lh_array_tag_shift)); 2570 __ jcc(Assembler::greaterEqual, L); 2571 __ stop("must be a primitive array"); 2572 __ bind(L); 2573 BLOCK_COMMENT("} assert primitive array done"); 2574 } 2575 #endif 2576 2577 arraycopy_range_checks(src, src_pos, dst, dst_pos, r11_length, 2578 r10, L_failed); 2579 2580 // typeArrayKlass 2581 // 2582 // src_addr = (src + array_header_in_bytes()) + (src_pos << log2elemsize); 2583 // dst_addr = (dst + array_header_in_bytes()) + (dst_pos << log2elemsize); 2584 // 2585 2586 const Register r10_offset = r10; // array offset 2587 const Register rax_elsize = rax_lh; // element size 2588 2589 __ movl(r10_offset, rax_lh); 2590 __ shrl(r10_offset, Klass::_lh_header_size_shift); 2591 __ andptr(r10_offset, Klass::_lh_header_size_mask); // array_offset 2592 __ addptr(src, r10_offset); // src array offset 2593 __ addptr(dst, r10_offset); // dst array offset 2594 BLOCK_COMMENT("choose copy loop based on element size"); 2595 __ andl(rax_lh, Klass::_lh_log2_element_size_mask); // rax_lh -> rax_elsize 2596 2597 // next registers should be set before the jump to corresponding stub 2598 const Register from = c_rarg0; // source array address 2599 const Register to = c_rarg1; // destination array address 2600 const Register count = c_rarg2; // elements count 2601 2602 // 'from', 'to', 'count' registers should be set in such order 2603 // since they are the same as 'src', 'src_pos', 'dst'. 2604 2605 __ BIND(L_copy_bytes); 2606 __ cmpl(rax_elsize, 0); 2607 __ jccb(Assembler::notEqual, L_copy_shorts); 2608 __ lea(from, Address(src, src_pos, Address::times_1, 0));// src_addr 2609 __ lea(to, Address(dst, dst_pos, Address::times_1, 0));// dst_addr 2610 __ movl2ptr(count, r11_length); // length 2611 __ jump(RuntimeAddress(byte_copy_entry)); 2612 2613 __ BIND(L_copy_shorts); 2614 __ cmpl(rax_elsize, LogBytesPerShort); 2615 __ jccb(Assembler::notEqual, L_copy_ints); 2616 __ lea(from, Address(src, src_pos, Address::times_2, 0));// src_addr 2617 __ lea(to, Address(dst, dst_pos, Address::times_2, 0));// dst_addr 2618 __ movl2ptr(count, r11_length); // length 2619 __ jump(RuntimeAddress(short_copy_entry)); 2620 2621 __ BIND(L_copy_ints); 2622 __ cmpl(rax_elsize, LogBytesPerInt); 2623 __ jccb(Assembler::notEqual, L_copy_longs); 2624 __ lea(from, Address(src, src_pos, Address::times_4, 0));// src_addr 2625 __ lea(to, Address(dst, dst_pos, Address::times_4, 0));// dst_addr 2626 __ movl2ptr(count, r11_length); // length 2627 __ jump(RuntimeAddress(int_copy_entry)); 2628 2629 __ BIND(L_copy_longs); 2630 #ifdef ASSERT 2631 { 2632 BLOCK_COMMENT("assert long copy {"); 2633 Label L; 2634 __ cmpl(rax_elsize, LogBytesPerLong); 2635 __ jcc(Assembler::equal, L); 2636 __ stop("must be long copy, but elsize is wrong"); 2637 __ bind(L); 2638 BLOCK_COMMENT("} assert long copy done"); 2639 } 2640 #endif 2641 __ lea(from, Address(src, src_pos, Address::times_8, 0));// src_addr 2642 __ lea(to, Address(dst, dst_pos, Address::times_8, 0));// dst_addr 2643 __ movl2ptr(count, r11_length); // length 2644 __ jump(RuntimeAddress(long_copy_entry)); 2645 2646 // objArrayKlass 2647 __ BIND(L_objArray); 2648 // live at this point: r10_src_klass, r11_length, src[_pos], dst[_pos] 2649 2650 Label L_plain_copy, L_checkcast_copy; 2651 // test array classes for subtyping 2652 __ load_klass(rax, dst); 2653 __ cmpq(r10_src_klass, rax); // usual case is exact equality 2654 __ jcc(Assembler::notEqual, L_checkcast_copy); 2655 2656 // Identically typed arrays can be copied without element-wise checks. 2657 arraycopy_range_checks(src, src_pos, dst, dst_pos, r11_length, 2658 r10, L_failed); 2659 2660 __ lea(from, Address(src, src_pos, TIMES_OOP, 2661 arrayOopDesc::base_offset_in_bytes(T_OBJECT))); // src_addr 2662 __ lea(to, Address(dst, dst_pos, TIMES_OOP, 2663 arrayOopDesc::base_offset_in_bytes(T_OBJECT))); // dst_addr 2664 __ movl2ptr(count, r11_length); // length 2665 __ BIND(L_plain_copy); 2666 __ jump(RuntimeAddress(oop_copy_entry)); 2667 2668 __ BIND(L_checkcast_copy); 2669 // live at this point: r10_src_klass, r11_length, rax (dst_klass) 2670 { 2671 // Before looking at dst.length, make sure dst is also an objArray. 2672 __ cmpl(Address(rax, lh_offset), objArray_lh); 2673 __ jcc(Assembler::notEqual, L_failed); 2674 2675 // It is safe to examine both src.length and dst.length. 2676 arraycopy_range_checks(src, src_pos, dst, dst_pos, r11_length, 2677 rax, L_failed); 2678 2679 const Register r11_dst_klass = r11; 2680 __ load_klass(r11_dst_klass, dst); // reload 2681 2682 // Marshal the base address arguments now, freeing registers. 2683 __ lea(from, Address(src, src_pos, TIMES_OOP, 2684 arrayOopDesc::base_offset_in_bytes(T_OBJECT))); 2685 __ lea(to, Address(dst, dst_pos, TIMES_OOP, 2686 arrayOopDesc::base_offset_in_bytes(T_OBJECT))); 2687 __ movl(count, length); // length (reloaded) 2688 Register sco_temp = c_rarg3; // this register is free now 2689 assert_different_registers(from, to, count, sco_temp, 2690 r11_dst_klass, r10_src_klass); 2691 assert_clean_int(count, sco_temp); 2692 2693 // Generate the type check. 2694 const int sco_offset = (klassOopDesc::header_size() * HeapWordSize + 2695 Klass::super_check_offset_offset_in_bytes()); 2696 __ movl(sco_temp, Address(r11_dst_klass, sco_offset)); 2697 assert_clean_int(sco_temp, rax); 2698 generate_type_check(r10_src_klass, sco_temp, r11_dst_klass, L_plain_copy); 2699 2700 // Fetch destination element klass from the objArrayKlass header. 2701 int ek_offset = (klassOopDesc::header_size() * HeapWordSize + 2702 objArrayKlass::element_klass_offset_in_bytes()); 2703 __ movptr(r11_dst_klass, Address(r11_dst_klass, ek_offset)); 2704 __ movl( sco_temp, Address(r11_dst_klass, sco_offset)); 2705 assert_clean_int(sco_temp, rax); 2706 2707 // the checkcast_copy loop needs two extra arguments: 2708 assert(c_rarg3 == sco_temp, "#3 already in place"); 2709 // Set up arguments for checkcast_copy_entry. 2710 setup_arg_regs(4); 2711 __ movptr(r8, r11_dst_klass); // dst.klass.element_klass, r8 is c_rarg4 on Linux/Solaris 2712 __ jump(RuntimeAddress(checkcast_copy_entry)); 2713 } 2714 2715 __ BIND(L_failed); 2716 __ xorptr(rax, rax); 2717 __ notptr(rax); // return -1 2718 __ leave(); // required for proper stackwalking of RuntimeStub frame 2719 __ ret(0); 2720 2721 return start; 2722 } 2723 2724 void generate_arraycopy_stubs() { 2725 address entry; 2726 address entry_jbyte_arraycopy; 2727 address entry_jshort_arraycopy; 2728 address entry_jint_arraycopy; 2729 address entry_oop_arraycopy; 2730 address entry_jlong_arraycopy; 2731 address entry_checkcast_arraycopy; 2732 2733 StubRoutines::_jbyte_disjoint_arraycopy = generate_disjoint_byte_copy(false, &entry, 2734 "jbyte_disjoint_arraycopy"); 2735 StubRoutines::_jbyte_arraycopy = generate_conjoint_byte_copy(false, entry, &entry_jbyte_arraycopy, 2736 "jbyte_arraycopy"); 2737 2738 StubRoutines::_jshort_disjoint_arraycopy = generate_disjoint_short_copy(false, &entry, 2739 "jshort_disjoint_arraycopy"); 2740 StubRoutines::_jshort_arraycopy = generate_conjoint_short_copy(false, entry, &entry_jshort_arraycopy, 2741 "jshort_arraycopy"); 2742 2743 StubRoutines::_jint_disjoint_arraycopy = generate_disjoint_int_oop_copy(false, false, &entry, 2744 "jint_disjoint_arraycopy"); 2745 StubRoutines::_jint_arraycopy = generate_conjoint_int_oop_copy(false, false, entry, 2746 &entry_jint_arraycopy, "jint_arraycopy"); 2747 2748 StubRoutines::_jlong_disjoint_arraycopy = generate_disjoint_long_oop_copy(false, false, &entry, 2749 "jlong_disjoint_arraycopy"); 2750 StubRoutines::_jlong_arraycopy = generate_conjoint_long_oop_copy(false, false, entry, 2751 &entry_jlong_arraycopy, "jlong_arraycopy"); 2752 2753 2754 if (UseCompressedOops) { 2755 StubRoutines::_oop_disjoint_arraycopy = generate_disjoint_int_oop_copy(false, true, &entry, 2756 "oop_disjoint_arraycopy"); 2757 StubRoutines::_oop_arraycopy = generate_conjoint_int_oop_copy(false, true, entry, 2758 &entry_oop_arraycopy, "oop_arraycopy"); 2759 StubRoutines::_oop_disjoint_arraycopy_uninit = generate_disjoint_int_oop_copy(false, true, &entry, 2760 "oop_disjoint_arraycopy_uninit", 2761 /*dest_uninitialized*/true); 2762 StubRoutines::_oop_arraycopy_uninit = generate_conjoint_int_oop_copy(false, true, entry, 2763 NULL, "oop_arraycopy_uninit", 2764 /*dest_uninitialized*/true); 2765 } else { 2766 StubRoutines::_oop_disjoint_arraycopy = generate_disjoint_long_oop_copy(false, true, &entry, 2767 "oop_disjoint_arraycopy"); 2768 StubRoutines::_oop_arraycopy = generate_conjoint_long_oop_copy(false, true, entry, 2769 &entry_oop_arraycopy, "oop_arraycopy"); 2770 StubRoutines::_oop_disjoint_arraycopy_uninit = generate_disjoint_long_oop_copy(false, true, &entry, 2771 "oop_disjoint_arraycopy_uninit", 2772 /*dest_uninitialized*/true); 2773 StubRoutines::_oop_arraycopy_uninit = generate_conjoint_long_oop_copy(false, true, entry, 2774 NULL, "oop_arraycopy_uninit", 2775 /*dest_uninitialized*/true); 2776 } 2777 2778 StubRoutines::_checkcast_arraycopy = generate_checkcast_copy("checkcast_arraycopy", &entry_checkcast_arraycopy); 2779 StubRoutines::_checkcast_arraycopy_uninit = generate_checkcast_copy("checkcast_arraycopy_uninit", NULL, 2780 /*dest_uninitialized*/true); 2781 2782 StubRoutines::_unsafe_arraycopy = generate_unsafe_copy("unsafe_arraycopy", 2783 entry_jbyte_arraycopy, 2784 entry_jshort_arraycopy, 2785 entry_jint_arraycopy, 2786 entry_jlong_arraycopy); 2787 StubRoutines::_generic_arraycopy = generate_generic_copy("generic_arraycopy", 2788 entry_jbyte_arraycopy, 2789 entry_jshort_arraycopy, 2790 entry_jint_arraycopy, 2791 entry_oop_arraycopy, 2792 entry_jlong_arraycopy, 2793 entry_checkcast_arraycopy); 2794 2795 StubRoutines::_jbyte_fill = generate_fill(T_BYTE, false, "jbyte_fill"); 2796 StubRoutines::_jshort_fill = generate_fill(T_SHORT, false, "jshort_fill"); 2797 StubRoutines::_jint_fill = generate_fill(T_INT, false, "jint_fill"); 2798 StubRoutines::_arrayof_jbyte_fill = generate_fill(T_BYTE, true, "arrayof_jbyte_fill"); 2799 StubRoutines::_arrayof_jshort_fill = generate_fill(T_SHORT, true, "arrayof_jshort_fill"); 2800 StubRoutines::_arrayof_jint_fill = generate_fill(T_INT, true, "arrayof_jint_fill"); 2801 2802 // We don't generate specialized code for HeapWord-aligned source 2803 // arrays, so just use the code we've already generated 2804 StubRoutines::_arrayof_jbyte_disjoint_arraycopy = StubRoutines::_jbyte_disjoint_arraycopy; 2805 StubRoutines::_arrayof_jbyte_arraycopy = StubRoutines::_jbyte_arraycopy; 2806 2807 StubRoutines::_arrayof_jshort_disjoint_arraycopy = StubRoutines::_jshort_disjoint_arraycopy; 2808 StubRoutines::_arrayof_jshort_arraycopy = StubRoutines::_jshort_arraycopy; 2809 2810 StubRoutines::_arrayof_jint_disjoint_arraycopy = StubRoutines::_jint_disjoint_arraycopy; 2811 StubRoutines::_arrayof_jint_arraycopy = StubRoutines::_jint_arraycopy; 2812 2813 StubRoutines::_arrayof_jlong_disjoint_arraycopy = StubRoutines::_jlong_disjoint_arraycopy; 2814 StubRoutines::_arrayof_jlong_arraycopy = StubRoutines::_jlong_arraycopy; 2815 2816 StubRoutines::_arrayof_oop_disjoint_arraycopy = StubRoutines::_oop_disjoint_arraycopy; 2817 StubRoutines::_arrayof_oop_arraycopy = StubRoutines::_oop_arraycopy; 2818 2819 StubRoutines::_arrayof_oop_disjoint_arraycopy_uninit = StubRoutines::_oop_disjoint_arraycopy_uninit; 2820 StubRoutines::_arrayof_oop_arraycopy_uninit = StubRoutines::_oop_arraycopy_uninit; 2821 } 2822 2823 void generate_math_stubs() { 2824 { 2825 StubCodeMark mark(this, "StubRoutines", "log"); 2826 StubRoutines::_intrinsic_log = (double (*)(double)) __ pc(); 2827 2828 __ subq(rsp, 8); 2829 __ movdbl(Address(rsp, 0), xmm0); 2830 __ fld_d(Address(rsp, 0)); 2831 __ flog(); 2832 __ fstp_d(Address(rsp, 0)); 2833 __ movdbl(xmm0, Address(rsp, 0)); 2834 __ addq(rsp, 8); 2835 __ ret(0); 2836 } 2837 { 2838 StubCodeMark mark(this, "StubRoutines", "log10"); 2839 StubRoutines::_intrinsic_log10 = (double (*)(double)) __ pc(); 2840 2841 __ subq(rsp, 8); 2842 __ movdbl(Address(rsp, 0), xmm0); 2843 __ fld_d(Address(rsp, 0)); 2844 __ flog10(); 2845 __ fstp_d(Address(rsp, 0)); 2846 __ movdbl(xmm0, Address(rsp, 0)); 2847 __ addq(rsp, 8); 2848 __ ret(0); 2849 } 2850 { 2851 StubCodeMark mark(this, "StubRoutines", "sin"); 2852 StubRoutines::_intrinsic_sin = (double (*)(double)) __ pc(); 2853 2854 __ subq(rsp, 8); 2855 __ movdbl(Address(rsp, 0), xmm0); 2856 __ fld_d(Address(rsp, 0)); 2857 __ trigfunc('s'); 2858 __ fstp_d(Address(rsp, 0)); 2859 __ movdbl(xmm0, Address(rsp, 0)); 2860 __ addq(rsp, 8); 2861 __ ret(0); 2862 } 2863 { 2864 StubCodeMark mark(this, "StubRoutines", "cos"); 2865 StubRoutines::_intrinsic_cos = (double (*)(double)) __ pc(); 2866 2867 __ subq(rsp, 8); 2868 __ movdbl(Address(rsp, 0), xmm0); 2869 __ fld_d(Address(rsp, 0)); 2870 __ trigfunc('c'); 2871 __ fstp_d(Address(rsp, 0)); 2872 __ movdbl(xmm0, Address(rsp, 0)); 2873 __ addq(rsp, 8); 2874 __ ret(0); 2875 } 2876 { 2877 StubCodeMark mark(this, "StubRoutines", "tan"); 2878 StubRoutines::_intrinsic_tan = (double (*)(double)) __ pc(); 2879 2880 __ subq(rsp, 8); 2881 __ movdbl(Address(rsp, 0), xmm0); 2882 __ fld_d(Address(rsp, 0)); 2883 __ trigfunc('t'); 2884 __ fstp_d(Address(rsp, 0)); 2885 __ movdbl(xmm0, Address(rsp, 0)); 2886 __ addq(rsp, 8); 2887 __ ret(0); 2888 } 2889 2890 // The intrinsic version of these seem to return the same value as 2891 // the strict version. 2892 StubRoutines::_intrinsic_exp = SharedRuntime::dexp; 2893 StubRoutines::_intrinsic_pow = SharedRuntime::dpow; 2894 } 2895 2896 #undef __ 2897 #define __ masm-> 2898 2899 // Continuation point for throwing of implicit exceptions that are 2900 // not handled in the current activation. Fabricates an exception 2901 // oop and initiates normal exception dispatching in this 2902 // frame. Since we need to preserve callee-saved values (currently 2903 // only for C2, but done for C1 as well) we need a callee-saved oop 2904 // map and therefore have to make these stubs into RuntimeStubs 2905 // rather than BufferBlobs. If the compiler needs all registers to 2906 // be preserved between the fault point and the exception handler 2907 // then it must assume responsibility for that in 2908 // AbstractCompiler::continuation_for_implicit_null_exception or 2909 // continuation_for_implicit_division_by_zero_exception. All other 2910 // implicit exceptions (e.g., NullPointerException or 2911 // AbstractMethodError on entry) are either at call sites or 2912 // otherwise assume that stack unwinding will be initiated, so 2913 // caller saved registers were assumed volatile in the compiler. 2914 address generate_throw_exception(const char* name, 2915 address runtime_entry, 2916 bool restore_saved_exception_pc) { 2917 // Information about frame layout at time of blocking runtime call. 2918 // Note that we only have to preserve callee-saved registers since 2919 // the compilers are responsible for supplying a continuation point 2920 // if they expect all registers to be preserved. 2921 enum layout { 2922 rbp_off = frame::arg_reg_save_area_bytes/BytesPerInt, 2923 rbp_off2, 2924 return_off, 2925 return_off2, 2926 framesize // inclusive of return address 2927 }; 2928 2929 int insts_size = 512; 2930 int locs_size = 64; 2931 2932 CodeBuffer code(name, insts_size, locs_size); 2933 OopMapSet* oop_maps = new OopMapSet(); 2934 MacroAssembler* masm = new MacroAssembler(&code); 2935 2936 address start = __ pc(); 2937 2938 // This is an inlined and slightly modified version of call_VM 2939 // which has the ability to fetch the return PC out of 2940 // thread-local storage and also sets up last_Java_sp slightly 2941 // differently than the real call_VM 2942 if (restore_saved_exception_pc) { 2943 __ movptr(rax, 2944 Address(r15_thread, 2945 in_bytes(JavaThread::saved_exception_pc_offset()))); 2946 __ push(rax); 2947 } 2948 2949 __ enter(); // required for proper stackwalking of RuntimeStub frame 2950 2951 assert(is_even(framesize/2), "sp not 16-byte aligned"); 2952 2953 // return address and rbp are already in place 2954 __ subptr(rsp, (framesize-4) << LogBytesPerInt); // prolog 2955 2956 int frame_complete = __ pc() - start; 2957 2958 // Set up last_Java_sp and last_Java_fp 2959 __ set_last_Java_frame(rsp, rbp, NULL); 2960 2961 // Call runtime 2962 __ movptr(c_rarg0, r15_thread); 2963 BLOCK_COMMENT("call runtime_entry"); 2964 __ call(RuntimeAddress(runtime_entry)); 2965 2966 // Generate oop map 2967 OopMap* map = new OopMap(framesize, 0); 2968 2969 oop_maps->add_gc_map(__ pc() - start, map); 2970 2971 __ reset_last_Java_frame(true, false); 2972 2973 __ leave(); // required for proper stackwalking of RuntimeStub frame 2974 2975 // check for pending exceptions 2976 #ifdef ASSERT 2977 Label L; 2978 __ cmpptr(Address(r15_thread, Thread::pending_exception_offset()), 2979 (int32_t) NULL_WORD); 2980 __ jcc(Assembler::notEqual, L); 2981 __ should_not_reach_here(); 2982 __ bind(L); 2983 #endif // ASSERT 2984 __ jump(RuntimeAddress(StubRoutines::forward_exception_entry())); 2985 2986 2987 // codeBlob framesize is in words (not VMRegImpl::slot_size) 2988 RuntimeStub* stub = 2989 RuntimeStub::new_runtime_stub(name, 2990 &code, 2991 frame_complete, 2992 (framesize >> (LogBytesPerWord - LogBytesPerInt)), 2993 oop_maps, false); 2994 return stub->entry_point(); 2995 } 2996 2997 // Initialization 2998 void generate_initial() { 2999 // Generates all stubs and initializes the entry points 3000 3001 // This platform-specific stub is needed by generate_call_stub() 3002 StubRoutines::x86::_mxcsr_std = generate_fp_mask("mxcsr_std", 0x0000000000001F80); 3003 3004 // entry points that exist in all platforms Note: This is code 3005 // that could be shared among different platforms - however the 3006 // benefit seems to be smaller than the disadvantage of having a 3007 // much more complicated generator structure. See also comment in 3008 // stubRoutines.hpp. 3009 3010 StubRoutines::_forward_exception_entry = generate_forward_exception(); 3011 3012 StubRoutines::_call_stub_entry = 3013 generate_call_stub(StubRoutines::_call_stub_return_address); 3014 3015 // is referenced by megamorphic call 3016 StubRoutines::_catch_exception_entry = generate_catch_exception(); 3017 3018 // atomic calls 3019 StubRoutines::_atomic_xchg_entry = generate_atomic_xchg(); 3020 StubRoutines::_atomic_xchg_ptr_entry = generate_atomic_xchg_ptr(); 3021 StubRoutines::_atomic_cmpxchg_entry = generate_atomic_cmpxchg(); 3022 StubRoutines::_atomic_cmpxchg_long_entry = generate_atomic_cmpxchg_long(); 3023 StubRoutines::_atomic_add_entry = generate_atomic_add(); 3024 StubRoutines::_atomic_add_ptr_entry = generate_atomic_add_ptr(); 3025 StubRoutines::_fence_entry = generate_orderaccess_fence(); 3026 3027 StubRoutines::_handler_for_unsafe_access_entry = 3028 generate_handler_for_unsafe_access(); 3029 3030 // platform dependent 3031 StubRoutines::x86::_get_previous_fp_entry = generate_get_previous_fp(); 3032 3033 StubRoutines::x86::_verify_mxcsr_entry = generate_verify_mxcsr(); 3034 } 3035 3036 void generate_all() { 3037 // Generates all stubs and initializes the entry points 3038 3039 // These entry points require SharedInfo::stack0 to be set up in 3040 // non-core builds and need to be relocatable, so they each 3041 // fabricate a RuntimeStub internally. 3042 StubRoutines::_throw_AbstractMethodError_entry = 3043 generate_throw_exception("AbstractMethodError throw_exception", 3044 CAST_FROM_FN_PTR(address, 3045 SharedRuntime:: 3046 throw_AbstractMethodError), 3047 false); 3048 3049 StubRoutines::_throw_IncompatibleClassChangeError_entry = 3050 generate_throw_exception("IncompatibleClassChangeError throw_exception", 3051 CAST_FROM_FN_PTR(address, 3052 SharedRuntime:: 3053 throw_IncompatibleClassChangeError), 3054 false); 3055 3056 StubRoutines::_throw_ArithmeticException_entry = 3057 generate_throw_exception("ArithmeticException throw_exception", 3058 CAST_FROM_FN_PTR(address, 3059 SharedRuntime:: 3060 throw_ArithmeticException), 3061 true); 3062 3063 StubRoutines::_throw_NullPointerException_entry = 3064 generate_throw_exception("NullPointerException throw_exception", 3065 CAST_FROM_FN_PTR(address, 3066 SharedRuntime:: 3067 throw_NullPointerException), 3068 true); 3069 3070 StubRoutines::_throw_NullPointerException_at_call_entry = 3071 generate_throw_exception("NullPointerException at call throw_exception", 3072 CAST_FROM_FN_PTR(address, 3073 SharedRuntime:: 3074 throw_NullPointerException_at_call), 3075 false); 3076 3077 StubRoutines::_throw_StackOverflowError_entry = 3078 generate_throw_exception("StackOverflowError throw_exception", 3079 CAST_FROM_FN_PTR(address, 3080 SharedRuntime:: 3081 throw_StackOverflowError), 3082 false); 3083 3084 // entry points that are platform specific 3085 StubRoutines::x86::_f2i_fixup = generate_f2i_fixup(); 3086 StubRoutines::x86::_f2l_fixup = generate_f2l_fixup(); 3087 StubRoutines::x86::_d2i_fixup = generate_d2i_fixup(); 3088 StubRoutines::x86::_d2l_fixup = generate_d2l_fixup(); 3089 3090 StubRoutines::x86::_float_sign_mask = generate_fp_mask("float_sign_mask", 0x7FFFFFFF7FFFFFFF); 3091 StubRoutines::x86::_float_sign_flip = generate_fp_mask("float_sign_flip", 0x8000000080000000); 3092 StubRoutines::x86::_double_sign_mask = generate_fp_mask("double_sign_mask", 0x7FFFFFFFFFFFFFFF); 3093 StubRoutines::x86::_double_sign_flip = generate_fp_mask("double_sign_flip", 0x8000000000000000); 3094 3095 // support for verify_oop (must happen after universe_init) 3096 StubRoutines::_verify_oop_subroutine_entry = generate_verify_oop(); 3097 3098 // arraycopy stubs used by compilers 3099 generate_arraycopy_stubs(); 3100 3101 generate_math_stubs(); 3102 } 3103 3104 public: 3105 StubGenerator(CodeBuffer* code, bool all) : StubCodeGenerator(code) { 3106 if (all) { 3107 generate_all(); 3108 } else { 3109 generate_initial(); 3110 } 3111 } 3112 }; // end class declaration 3113 3114 void StubGenerator_generate(CodeBuffer* code, bool all) { 3115 StubGenerator g(code, all); 3116 }