Testing the JDK

Using "make test" (the run-test framework)

This new way of running tests is developer-centric. It assumes that you have built a JDK locally and want to test it. Running common test targets is simple, and more complex ad-hoc combination of tests is possible. The user interface is forgiving, and clearly report errors it cannot resolve.

The main target test uses the jdk-image as the tested product. There is also an alternate target exploded-test that uses the exploded image instead. Not all tests will run successfully on the exploded image, but using this target can greatly improve rebuild times for certain workflows.

Previously, make test was used to invoke an old system for running tests, and make run-test was used for the new test framework. For backward compatibility with scripts and muscle memory, run-test (and variants like exploded-run-test or run-test-tier1) are kept as aliases.

Some example command-lines:

$ make test-tier1
$ make test-jdk_lang JTREG="JOBS=8"
$ make test TEST=jdk_lang
$ make test-only TEST="gtest:LogTagSet gtest:LogTagSetDescriptions" GTEST="REPEAT=-1"
$ make test TEST="hotspot:hotspot_gc" JTREG="JOBS=1;TIMEOUT=8;VM_OPTIONS=-XshowSettings -Xlog:gc+ref=debug"
$ make test TEST="jtreg:test/hotspot:hotspot_gc test/hotspot/jtreg/native_sanity/JniVersion.java"
$ make test TEST="micro:java.lang.reflect" MICRO="FORK=1;WARMUP_ITER=2"
$ make exploded-test TEST=tier2

Configuration

To be able to run JTReg tests, configure needs to know where to find the JTReg test framework. If it is not picked up automatically by configure, use the --with-jtreg=<path to jtreg home> option to point to the JTReg framework. Note that this option should point to the JTReg home, i.e. the top directory, containing lib/jtreg.jar etc. (An alternative is to set the JT_HOME environment variable to point to the JTReg home before running configure.)

To be able to run microbenchmarks, configure needs to know where to find the JMH dependency. Use --with-jmh=<path to JMH jars> to point to a directory containing the core JMH and transitive dependencies. The recommended dependencies can be retrieved by running sh make/devkit/createJMHBundle.sh, after which --with-jmh=build/jmh/jars should work.

Test selection

All functionality is available using the test make target. In this use case, the test or tests to be executed is controlled using the TEST variable. To speed up subsequent test runs with no source code changes, test-only can be used instead, which do not depend on the source and test image build.

For some common top-level tests, direct make targets have been generated. This includes all JTReg test groups, the hotspot gtest, and custom tests (if present). This means that make test-tier1 is equivalent to make test TEST="tier1", but the latter is more tab-completion friendly. For more complex test runs, the test TEST="x" solution needs to be used.

The test specifications given in TEST is parsed into fully qualified test descriptors, which clearly and unambigously show which tests will be run. As an example, :tier1 will expand to jtreg:$(TOPDIR)/test/hotspot/jtreg:tier1 jtreg:$(TOPDIR)/test/jdk:tier1 jtreg:$(TOPDIR)/test/langtools:tier1 jtreg:$(TOPDIR)/test/nashorn:tier1 jtreg:$(TOPDIR)/test/jaxp:tier1. You can always submit a list of fully qualified test descriptors in the TEST variable if you want to shortcut the parser.

JTReg

JTReg tests can be selected either by picking a JTReg test group, or a selection of files or directories containing JTReg tests.

JTReg test groups can be specified either without a test root, e.g. :tier1 (or tier1, the initial colon is optional), or with, e.g. hotspot:tier1, test/jdk:jdk_util or $(TOPDIR)/test/hotspot/jtreg:hotspot_all. The test root can be specified either as an absolute path, or a path relative to the JDK top directory, or the test directory. For simplicity, the hotspot JTReg test root, which really is hotspot/jtreg can be abbreviated as just hotspot.

When specified without a test root, all matching groups from all test roots will be added. Otherwise, only the group from the specified test root will be added.

Individual JTReg tests or directories containing JTReg tests can also be specified, like test/hotspot/jtreg/native_sanity/JniVersion.java or hotspot/jtreg/native_sanity. Just like for test root selection, you can either specify an absolute path (which can even point to JTReg tests outside the source tree), or a path relative to either the JDK top directory or the test directory. hotspot can be used as an alias for hotspot/jtreg here as well.

As long as the test groups or test paths can be uniquely resolved, you do not need to enter the jtreg: prefix. If this is not possible, or if you want to use a fully qualified test descriptor, add jtreg:, e.g. jtreg:test/hotspot/jtreg/native_sanity.

Gtest

Since the Hotspot Gtest suite is so quick, the default is to run all tests. This is specified by just gtest, or as a fully qualified test descriptor gtest:all.

If you want, you can single out an individual test or a group of tests, for instance gtest:LogDecorations or gtest:LogDecorations.level_test_vm. This can be particularly useful if you want to run a shaky test repeatedly.

For Gtest, there is a separate test suite for each JVM variant. The JVM variant is defined by adding /<variant> to the test descriptor, e.g. gtest:Log/client. If you specify no variant, gtest will run once for each JVM variant present (e.g. server, client). So if you only have the server JVM present, then gtest:all will be equivalent to gtest:all/server.

Microbenchmarks

Which microbenchmarks to run is selected using a regular expression following the micro: test descriptor, e.g., micro:java.lang.reflect. This delegates the test selection to JMH, meaning package name, class name and even benchmark method names can be used to select tests.

Using special characters like | in the regular expression is possible, but needs to be escaped multiple times: micro:ArrayCopy\\\\\|reflect.

Special tests

A handful of odd tests that are not covered by any other testing framework are accessible using the special: test descriptor. Currently, this includes failure-handler and make.

Test results and summary

At the end of the test run, a summary of all tests run will be presented. This will have a consistent look, regardless of what test suites were used. This is a sample summary:

==============================
Test summary
==============================
   TEST                                          TOTAL  PASS  FAIL ERROR
>> jtreg:jdk/test:tier1                           1867  1865     2     0 <<
   jtreg:langtools/test:tier1                     4711  4711     0     0
   jtreg:nashorn/test:tier1                        133   133     0     0
==============================
TEST FAILURE

Tests where the number of TOTAL tests does not equal the number of PASSed tests will be considered a test failure. These are marked with the >> ... << marker for easy identification.

The classification of non-passed tests differs a bit between test suites. In the summary, ERROR is used as a catch-all for tests that neither passed nor are classified as failed by the framework. This might indicate test framework error, timeout or other problems.

In case of test failures, make test will exit with a non-zero exit value.

All tests have their result stored in build/$BUILD/test-results/$TEST_ID, where TEST_ID is a path-safe conversion from the fully qualified test descriptor, e.g. for jtreg:jdk/test:tier1 the TEST_ID is jtreg_jdk_test_tier1. This path is also printed in the log at the end of the test run.

Additional work data is stored in build/$BUILD/test-support/$TEST_ID. For some frameworks, this directory might contain information that is useful in determining the cause of a failed test.

Test suite control

It is possible to control various aspects of the test suites using make control variables.

These variables use a keyword=value approach to allow multiple values to be set. So, for instance, JTREG="JOBS=1;TIMEOUT=8" will set the JTReg concurrency level to 1 and the timeout factor to 8. This is equivalent to setting JTREG_JOBS=1 JTREG_TIMEOUT=8, but using the keyword format means that the JTREG variable is parsed and verified for correctness, so JTREG="TMIEOUT=8" would give an error, while JTREG_TMIEOUT=8 would just pass unnoticed.

To separate multiple keyword=value pairs, use ; (semicolon). Since the shell normally eats ;, the recommended usage is to write the assignment inside qoutes, e.g. JTREG="...;...". This will also make sure spaces are preserved, as in JTREG="VM_OPTIONS=-XshowSettings -Xlog:gc+ref=debug".

(Other ways are possible, e.g. using backslash: JTREG=JOBS=1\;TIMEOUT=8. Also, as a special technique, the string %20 will be replaced with space for certain options, e.g. JTREG=VM_OPTIONS=-XshowSettings%20-Xlog:gc+ref=debug. This can be useful if you have layers of scripts and have trouble getting proper quoting of command line arguments through.)

As far as possible, the names of the keywords have been standardized between test suites.

General keywords (TEST_OPTS)

Some keywords are valid across different test suites. If you want to run tests from multiple test suites, or just don't want to care which test suite specific control variable to use, then you can use the general TEST_OPTS control variable.

There are also some keywords that applies globally to the test runner system, not to any specific test suites. These are also available as TEST_OPTS keywords.

JOBS

Currently only applies to JTReg.

TIMEOUT_FACTOR

Currently only applies to JTReg.

VM_OPTIONS

Applies to JTReg, GTest and Micro.

JAVA_OPTIONS

Applies to JTReg, GTest and Micro.

AOT_MODULES

Applies to JTReg and GTest.

JCOV

This keywords applies globally to the test runner system. If set to true, it enables JCov coverage reporting for all tests run. To be useful, the JDK under test must be run with a JDK built with JCov instrumentation (configure --with-jcov=<path to directory containing lib/jcov.jar>, make jcov-image).

The simplest way to run tests with JCov coverage report is to use the special target jcov-test instead of test, e.g. make jcov-test TEST=jdk_lang. This will make sure the JCov image is built, and that JCov reporting is enabled.

The JCov report is stored in build/$BUILD/test-results/jcov-output.

Please note that running with JCov reporting can be very memory intensive.

JTReg keywords

JOBS

The test concurrency (-concurrency).

Defaults to TEST_JOBS (if set by --with-test-jobs=), otherwise it defaults to JOBS, except for Hotspot, where the default is number of CPU cores/2 (for sparc, if more than 16 cpus, then number of CPU cores/5, otherwise number of CPU cores/4), but never more than memory size in GB/2.

TIMEOUT_FACTOR

The timeout factor (-timeoutFactor).

Defaults to 4.

TEST_MODE

The test mode (-agentvm, -samevm or -othervm).

Defaults to -agentvm.

ASSERT

Enable asserts (-ea -esa, or none).

Set to true or false. If true, adds -ea -esa. Defaults to true, except for hotspot.

VERBOSE

The verbosity level (-verbose).

Defaults to fail,error,summary.

RETAIN

What test data to retain (-retain).

Defaults to fail,error.

MAX_MEM

Limit memory consumption (-Xmx and -vmoption:-Xmx, or none).

Limit memory consumption for JTReg test framework and VM under test. Set to 0 to disable the limits.

Defaults to 512m, except for hotspot, where it defaults to 0 (no limit).

KEYWORDS

JTReg kewords sent to JTReg using -k. Please be careful in making sure that spaces and special characters (like !) are properly quoted. To avoid some issues, the special value %20 can be used instead of space.

EXTRA_PROBLEM_LISTS

Use additional problem lists file or files, in addition to the default ProblemList.txt located at the JTReg test roots.

If multiple file names are specified, they should be separated by space (or, to help avoid quoting issues, the special value %20).

The file names should be either absolute, or relative to the JTReg test root of the tests to be run.

OPTIONS

Additional options to the JTReg test framework.

Use JTREG="OPTIONS=--help all" to see all available JTReg options.

JAVA_OPTIONS

Additional Java options to JTReg (-javaoption).

VM_OPTIONS

Additional VM options to JTReg (-vmoption).

AOT_MODULES

Generate AOT modules before testing for the specified module, or set of modules. If multiple modules are specified, they should be separated by space (or, to help avoid quoting issues, the special value %20).

Gtest keywords

REPEAT

The number of times to repeat the tests (--gtest_repeat).

Default is 1. Set to -1 to repeat indefinitely. This can be especially useful combined with OPTIONS=--gtest_break_on_failure to reproduce an intermittent problem.

OPTIONS

Additional options to the Gtest test framework.

Use GTEST="OPTIONS=--help" to see all available Gtest options.

AOT_MODULES

Generate AOT modules before testing for the specified module, or set of modules. If multiple modules are specified, they should be separated by space (or, to help avoid quoting issues, the special value %20).

Microbenchmark keywords

FORK

Override the number of benchmark forks to spawn. Same as specifying -f <num>.

ITER

Number of measurement iterations per fork. Same as specifying -i <num>.

TIME

Amount of time to spend in each measurement iteration, in seconds. Same as specifying -r <num>

WARMUP_ITER

Number of warmup iterations to run before the measurement phase in each fork. Same as specifying -wi <num>.

WARMUP_TIME

Amount of time to spend in each warmup iteration. Same as specifying -w <num>.

RESULTS_FORMAT

Specify to have the test run save a log of the values. Accepts the same values as -rff, i.e., text, csv, scsv, json, or latex.

VM_OPTIONS

Additional VM arguments to provide to forked off VMs. Same as -jvmArgs <args>

OPTIONS

Additional arguments to send to JMH.

Notes for Specific Tests

Docker Tests

Docker tests with default parameters may fail on OS versions newer than oraclelinux 7.6. For example, they pass on Ubuntu 16.04 but fail on Ubuntu 18.04 if run like this:

$ make test TEST="jtreg:test/hotspot/jtreg/runtime/containers/docker"

To run these tests correctly, additional parameters for the correct docker image are required on Ubuntu 18.04 by using JAVA_OPTIONS.

$ make test TEST="jtreg:test/hotspot/jtreg/runtime/containers/docker" JTREG="JAVA_OPTIONS=-Djdk.test.docker.image.name=ubuntu -Djdk.test.docker.image.version=latest"