1 /* 2 * Copyright 1997-2009 Sun Microsystems, Inc. All Rights Reserved. 3 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. 4 * 5 * This code is free software; you can redistribute it and/or modify it 6 * under the terms of the GNU General Public License version 2 only, as 7 * published by the Free Software Foundation. 8 * 9 * This code is distributed in the hope that it will be useful, but WITHOUT 10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License 12 * version 2 for more details (a copy is included in the LICENSE file that 13 * accompanied this code). 14 * 15 * You should have received a copy of the GNU General Public License version 16 * 2 along with this work; if not, write to the Free Software Foundation, 17 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. 18 * 19 * Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, 20 * CA 95054 USA or visit www.sun.com if you need additional information or 21 * have any questions. 22 * 23 */ 24 25 #include "incls/_precompiled.incl" 26 #include "incls/_assembler_sparc.cpp.incl" 27 28 // Convert the raw encoding form into the form expected by the 29 // constructor for Address. 30 Address Address::make_raw(int base, int index, int scale, int disp, bool disp_is_oop) { 31 assert(scale == 0, "not supported"); 32 RelocationHolder rspec; 33 if (disp_is_oop) { 34 rspec = Relocation::spec_simple(relocInfo::oop_type); 35 } 36 37 Register rindex = as_Register(index); 38 if (rindex != G0) { 39 Address madr(as_Register(base), rindex); 40 madr._rspec = rspec; 41 return madr; 42 } else { 43 Address madr(as_Register(base), disp); 44 madr._rspec = rspec; 45 return madr; 46 } 47 } 48 49 Address Argument::address_in_frame() const { 50 // Warning: In LP64 mode disp will occupy more than 10 bits, but 51 // op codes such as ld or ldx, only access disp() to get 52 // their simm13 argument. 53 int disp = ((_number - Argument::n_register_parameters + frame::memory_parameter_word_sp_offset) * BytesPerWord) + STACK_BIAS; 54 if (is_in()) 55 return Address(FP, disp); // In argument. 56 else 57 return Address(SP, disp); // Out argument. 58 } 59 60 static const char* argumentNames[][2] = { 61 {"A0","P0"}, {"A1","P1"}, {"A2","P2"}, {"A3","P3"}, {"A4","P4"}, 62 {"A5","P5"}, {"A6","P6"}, {"A7","P7"}, {"A8","P8"}, {"A9","P9"}, 63 {"A(n>9)","P(n>9)"} 64 }; 65 66 const char* Argument::name() const { 67 int nofArgs = sizeof argumentNames / sizeof argumentNames[0]; 68 int num = number(); 69 if (num >= nofArgs) num = nofArgs - 1; 70 return argumentNames[num][is_in() ? 1 : 0]; 71 } 72 73 void Assembler::print_instruction(int inst) { 74 const char* s; 75 switch (inv_op(inst)) { 76 default: s = "????"; break; 77 case call_op: s = "call"; break; 78 case branch_op: 79 switch (inv_op2(inst)) { 80 case bpr_op2: s = "bpr"; break; 81 case fb_op2: s = "fb"; break; 82 case fbp_op2: s = "fbp"; break; 83 case br_op2: s = "br"; break; 84 case bp_op2: s = "bp"; break; 85 case cb_op2: s = "cb"; break; 86 default: s = "????"; break; 87 } 88 } 89 ::tty->print("%s", s); 90 } 91 92 93 // Patch instruction inst at offset inst_pos to refer to dest_pos 94 // and return the resulting instruction. 95 // We should have pcs, not offsets, but since all is relative, it will work out 96 // OK. 97 int Assembler::patched_branch(int dest_pos, int inst, int inst_pos) { 98 99 int m; // mask for displacement field 100 int v; // new value for displacement field 101 const int word_aligned_ones = -4; 102 switch (inv_op(inst)) { 103 default: ShouldNotReachHere(); 104 case call_op: m = wdisp(word_aligned_ones, 0, 30); v = wdisp(dest_pos, inst_pos, 30); break; 105 case branch_op: 106 switch (inv_op2(inst)) { 107 case bpr_op2: m = wdisp16(word_aligned_ones, 0); v = wdisp16(dest_pos, inst_pos); break; 108 case fbp_op2: m = wdisp( word_aligned_ones, 0, 19); v = wdisp( dest_pos, inst_pos, 19); break; 109 case bp_op2: m = wdisp( word_aligned_ones, 0, 19); v = wdisp( dest_pos, inst_pos, 19); break; 110 case fb_op2: m = wdisp( word_aligned_ones, 0, 22); v = wdisp( dest_pos, inst_pos, 22); break; 111 case br_op2: m = wdisp( word_aligned_ones, 0, 22); v = wdisp( dest_pos, inst_pos, 22); break; 112 case cb_op2: m = wdisp( word_aligned_ones, 0, 22); v = wdisp( dest_pos, inst_pos, 22); break; 113 default: ShouldNotReachHere(); 114 } 115 } 116 return inst & ~m | v; 117 } 118 119 // Return the offset of the branch destionation of instruction inst 120 // at offset pos. 121 // Should have pcs, but since all is relative, it works out. 122 int Assembler::branch_destination(int inst, int pos) { 123 int r; 124 switch (inv_op(inst)) { 125 default: ShouldNotReachHere(); 126 case call_op: r = inv_wdisp(inst, pos, 30); break; 127 case branch_op: 128 switch (inv_op2(inst)) { 129 case bpr_op2: r = inv_wdisp16(inst, pos); break; 130 case fbp_op2: r = inv_wdisp( inst, pos, 19); break; 131 case bp_op2: r = inv_wdisp( inst, pos, 19); break; 132 case fb_op2: r = inv_wdisp( inst, pos, 22); break; 133 case br_op2: r = inv_wdisp( inst, pos, 22); break; 134 case cb_op2: r = inv_wdisp( inst, pos, 22); break; 135 default: ShouldNotReachHere(); 136 } 137 } 138 return r; 139 } 140 141 int AbstractAssembler::code_fill_byte() { 142 return 0x00; // illegal instruction 0x00000000 143 } 144 145 Assembler::Condition Assembler::reg_cond_to_cc_cond(Assembler::RCondition in) { 146 switch (in) { 147 case rc_z: return equal; 148 case rc_lez: return lessEqual; 149 case rc_lz: return less; 150 case rc_nz: return notEqual; 151 case rc_gz: return greater; 152 case rc_gez: return greaterEqual; 153 default: 154 ShouldNotReachHere(); 155 } 156 return equal; 157 } 158 159 // Generate a bunch 'o stuff (including v9's 160 #ifndef PRODUCT 161 void Assembler::test_v9() { 162 add( G0, G1, G2 ); 163 add( G3, 0, G4 ); 164 165 addcc( G5, G6, G7 ); 166 addcc( I0, 1, I1 ); 167 addc( I2, I3, I4 ); 168 addc( I5, -1, I6 ); 169 addccc( I7, L0, L1 ); 170 addccc( L2, (1 << 12) - 2, L3 ); 171 172 Label lbl1, lbl2, lbl3; 173 174 bind(lbl1); 175 176 bpr( rc_z, true, pn, L4, pc(), relocInfo::oop_type ); 177 delayed()->nop(); 178 bpr( rc_lez, false, pt, L5, lbl1); 179 delayed()->nop(); 180 181 fb( f_never, true, pc() + 4, relocInfo::none); 182 delayed()->nop(); 183 fb( f_notEqual, false, lbl2 ); 184 delayed()->nop(); 185 186 fbp( f_notZero, true, fcc0, pn, pc() - 4, relocInfo::none); 187 delayed()->nop(); 188 fbp( f_lessOrGreater, false, fcc1, pt, lbl3 ); 189 delayed()->nop(); 190 191 br( equal, true, pc() + 1024, relocInfo::none); 192 delayed()->nop(); 193 br( lessEqual, false, lbl1 ); 194 delayed()->nop(); 195 br( never, false, lbl1 ); 196 delayed()->nop(); 197 198 bp( less, true, icc, pn, pc(), relocInfo::none); 199 delayed()->nop(); 200 bp( lessEqualUnsigned, false, xcc, pt, lbl2 ); 201 delayed()->nop(); 202 203 call( pc(), relocInfo::none); 204 delayed()->nop(); 205 call( lbl3 ); 206 delayed()->nop(); 207 208 209 casa( L6, L7, O0 ); 210 casxa( O1, O2, O3, 0 ); 211 212 udiv( O4, O5, O7 ); 213 udiv( G0, (1 << 12) - 1, G1 ); 214 sdiv( G1, G2, G3 ); 215 sdiv( G4, -((1 << 12) - 1), G5 ); 216 udivcc( G6, G7, I0 ); 217 udivcc( I1, -((1 << 12) - 2), I2 ); 218 sdivcc( I3, I4, I5 ); 219 sdivcc( I6, -((1 << 12) - 0), I7 ); 220 221 done(); 222 retry(); 223 224 fadd( FloatRegisterImpl::S, F0, F1, F2 ); 225 fsub( FloatRegisterImpl::D, F34, F0, F62 ); 226 227 fcmp( FloatRegisterImpl::Q, fcc0, F0, F60); 228 fcmpe( FloatRegisterImpl::S, fcc1, F31, F30); 229 230 ftox( FloatRegisterImpl::D, F2, F4 ); 231 ftoi( FloatRegisterImpl::Q, F4, F8 ); 232 233 ftof( FloatRegisterImpl::S, FloatRegisterImpl::Q, F3, F12 ); 234 235 fxtof( FloatRegisterImpl::S, F4, F5 ); 236 fitof( FloatRegisterImpl::D, F6, F8 ); 237 238 fmov( FloatRegisterImpl::Q, F16, F20 ); 239 fneg( FloatRegisterImpl::S, F6, F7 ); 240 fabs( FloatRegisterImpl::D, F10, F12 ); 241 242 fmul( FloatRegisterImpl::Q, F24, F28, F32 ); 243 fmul( FloatRegisterImpl::S, FloatRegisterImpl::D, F8, F9, F14 ); 244 fdiv( FloatRegisterImpl::S, F10, F11, F12 ); 245 246 fsqrt( FloatRegisterImpl::S, F13, F14 ); 247 248 flush( L0, L1 ); 249 flush( L2, -1 ); 250 251 flushw(); 252 253 illtrap( (1 << 22) - 2); 254 255 impdep1( 17, (1 << 19) - 1 ); 256 impdep2( 3, 0 ); 257 258 jmpl( L3, L4, L5 ); 259 delayed()->nop(); 260 jmpl( L6, -1, L7, Relocation::spec_simple(relocInfo::none)); 261 delayed()->nop(); 262 263 264 ldf( FloatRegisterImpl::S, O0, O1, F15 ); 265 ldf( FloatRegisterImpl::D, O2, -1, F14 ); 266 267 268 ldfsr( O3, O4 ); 269 ldfsr( O5, -1 ); 270 ldxfsr( O6, O7 ); 271 ldxfsr( I0, -1 ); 272 273 ldfa( FloatRegisterImpl::D, I1, I2, 1, F16 ); 274 ldfa( FloatRegisterImpl::Q, I3, -1, F36 ); 275 276 ldsb( I4, I5, I6 ); 277 ldsb( I7, -1, G0 ); 278 ldsh( G1, G3, G4 ); 279 ldsh( G5, -1, G6 ); 280 ldsw( G7, L0, L1 ); 281 ldsw( L2, -1, L3 ); 282 ldub( L4, L5, L6 ); 283 ldub( L7, -1, O0 ); 284 lduh( O1, O2, O3 ); 285 lduh( O4, -1, O5 ); 286 lduw( O6, O7, G0 ); 287 lduw( G1, -1, G2 ); 288 ldx( G3, G4, G5 ); 289 ldx( G6, -1, G7 ); 290 ldd( I0, I1, I2 ); 291 ldd( I3, -1, I4 ); 292 293 ldsba( I5, I6, 2, I7 ); 294 ldsba( L0, -1, L1 ); 295 ldsha( L2, L3, 3, L4 ); 296 ldsha( L5, -1, L6 ); 297 ldswa( L7, O0, (1 << 8) - 1, O1 ); 298 ldswa( O2, -1, O3 ); 299 lduba( O4, O5, 0, O6 ); 300 lduba( O7, -1, I0 ); 301 lduha( I1, I2, 1, I3 ); 302 lduha( I4, -1, I5 ); 303 lduwa( I6, I7, 2, L0 ); 304 lduwa( L1, -1, L2 ); 305 ldxa( L3, L4, 3, L5 ); 306 ldxa( L6, -1, L7 ); 307 ldda( G0, G1, 4, G2 ); 308 ldda( G3, -1, G4 ); 309 310 ldstub( G5, G6, G7 ); 311 ldstub( O0, -1, O1 ); 312 313 ldstuba( O2, O3, 5, O4 ); 314 ldstuba( O5, -1, O6 ); 315 316 and3( I0, L0, O0 ); 317 and3( G7, -1, O7 ); 318 andcc( L2, I2, G2 ); 319 andcc( L4, -1, G4 ); 320 andn( I5, I6, I7 ); 321 andn( I6, -1, I7 ); 322 andncc( I5, I6, I7 ); 323 andncc( I7, -1, I6 ); 324 or3( I5, I6, I7 ); 325 or3( I7, -1, I6 ); 326 orcc( I5, I6, I7 ); 327 orcc( I7, -1, I6 ); 328 orn( I5, I6, I7 ); 329 orn( I7, -1, I6 ); 330 orncc( I5, I6, I7 ); 331 orncc( I7, -1, I6 ); 332 xor3( I5, I6, I7 ); 333 xor3( I7, -1, I6 ); 334 xorcc( I5, I6, I7 ); 335 xorcc( I7, -1, I6 ); 336 xnor( I5, I6, I7 ); 337 xnor( I7, -1, I6 ); 338 xnorcc( I5, I6, I7 ); 339 xnorcc( I7, -1, I6 ); 340 341 membar( Membar_mask_bits(StoreStore | LoadStore | StoreLoad | LoadLoad | Sync | MemIssue | Lookaside ) ); 342 membar( StoreStore ); 343 membar( LoadStore ); 344 membar( StoreLoad ); 345 membar( LoadLoad ); 346 membar( Sync ); 347 membar( MemIssue ); 348 membar( Lookaside ); 349 350 fmov( FloatRegisterImpl::S, f_ordered, true, fcc2, F16, F17 ); 351 fmov( FloatRegisterImpl::D, rc_lz, L5, F18, F20 ); 352 353 movcc( overflowClear, false, icc, I6, L4 ); 354 movcc( f_unorderedOrEqual, true, fcc2, (1 << 10) - 1, O0 ); 355 356 movr( rc_nz, I5, I6, I7 ); 357 movr( rc_gz, L1, -1, L2 ); 358 359 mulx( I5, I6, I7 ); 360 mulx( I7, -1, I6 ); 361 sdivx( I5, I6, I7 ); 362 sdivx( I7, -1, I6 ); 363 udivx( I5, I6, I7 ); 364 udivx( I7, -1, I6 ); 365 366 umul( I5, I6, I7 ); 367 umul( I7, -1, I6 ); 368 smul( I5, I6, I7 ); 369 smul( I7, -1, I6 ); 370 umulcc( I5, I6, I7 ); 371 umulcc( I7, -1, I6 ); 372 smulcc( I5, I6, I7 ); 373 smulcc( I7, -1, I6 ); 374 375 mulscc( I5, I6, I7 ); 376 mulscc( I7, -1, I6 ); 377 378 nop(); 379 380 381 popc( G0, G1); 382 popc( -1, G2); 383 384 prefetch( L1, L2, severalReads ); 385 prefetch( L3, -1, oneRead ); 386 prefetcha( O3, O2, 6, severalWritesAndPossiblyReads ); 387 prefetcha( G2, -1, oneWrite ); 388 389 rett( I7, I7); 390 delayed()->nop(); 391 rett( G0, -1, relocInfo::none); 392 delayed()->nop(); 393 394 save( I5, I6, I7 ); 395 save( I7, -1, I6 ); 396 restore( I5, I6, I7 ); 397 restore( I7, -1, I6 ); 398 399 saved(); 400 restored(); 401 402 sethi( 0xaaaaaaaa, I3, Relocation::spec_simple(relocInfo::none)); 403 404 sll( I5, I6, I7 ); 405 sll( I7, 31, I6 ); 406 srl( I5, I6, I7 ); 407 srl( I7, 0, I6 ); 408 sra( I5, I6, I7 ); 409 sra( I7, 30, I6 ); 410 sllx( I5, I6, I7 ); 411 sllx( I7, 63, I6 ); 412 srlx( I5, I6, I7 ); 413 srlx( I7, 0, I6 ); 414 srax( I5, I6, I7 ); 415 srax( I7, 62, I6 ); 416 417 sir( -1 ); 418 419 stbar(); 420 421 stf( FloatRegisterImpl::Q, F40, G0, I7 ); 422 stf( FloatRegisterImpl::S, F18, I3, -1 ); 423 424 stfsr( L1, L2 ); 425 stfsr( I7, -1 ); 426 stxfsr( I6, I5 ); 427 stxfsr( L4, -1 ); 428 429 stfa( FloatRegisterImpl::D, F22, I6, I7, 7 ); 430 stfa( FloatRegisterImpl::Q, F44, G0, -1 ); 431 432 stb( L5, O2, I7 ); 433 stb( I7, I6, -1 ); 434 sth( L5, O2, I7 ); 435 sth( I7, I6, -1 ); 436 stw( L5, O2, I7 ); 437 stw( I7, I6, -1 ); 438 stx( L5, O2, I7 ); 439 stx( I7, I6, -1 ); 440 std( L5, O2, I7 ); 441 std( I7, I6, -1 ); 442 443 stba( L5, O2, I7, 8 ); 444 stba( I7, I6, -1 ); 445 stha( L5, O2, I7, 9 ); 446 stha( I7, I6, -1 ); 447 stwa( L5, O2, I7, 0 ); 448 stwa( I7, I6, -1 ); 449 stxa( L5, O2, I7, 11 ); 450 stxa( I7, I6, -1 ); 451 stda( L5, O2, I7, 12 ); 452 stda( I7, I6, -1 ); 453 454 sub( I5, I6, I7 ); 455 sub( I7, -1, I6 ); 456 subcc( I5, I6, I7 ); 457 subcc( I7, -1, I6 ); 458 subc( I5, I6, I7 ); 459 subc( I7, -1, I6 ); 460 subccc( I5, I6, I7 ); 461 subccc( I7, -1, I6 ); 462 463 swap( I5, I6, I7 ); 464 swap( I7, -1, I6 ); 465 466 swapa( G0, G1, 13, G2 ); 467 swapa( I7, -1, I6 ); 468 469 taddcc( I5, I6, I7 ); 470 taddcc( I7, -1, I6 ); 471 taddcctv( I5, I6, I7 ); 472 taddcctv( I7, -1, I6 ); 473 474 tsubcc( I5, I6, I7 ); 475 tsubcc( I7, -1, I6 ); 476 tsubcctv( I5, I6, I7 ); 477 tsubcctv( I7, -1, I6 ); 478 479 trap( overflowClear, xcc, G0, G1 ); 480 trap( lessEqual, icc, I7, 17 ); 481 482 bind(lbl2); 483 bind(lbl3); 484 485 code()->decode(); 486 } 487 488 // Generate a bunch 'o stuff unique to V8 489 void Assembler::test_v8_onlys() { 490 Label lbl1; 491 492 cb( cp_0or1or2, false, pc() - 4, relocInfo::none); 493 delayed()->nop(); 494 cb( cp_never, true, lbl1); 495 delayed()->nop(); 496 497 cpop1(1, 2, 3, 4); 498 cpop2(5, 6, 7, 8); 499 500 ldc( I0, I1, 31); 501 ldc( I2, -1, 0); 502 503 lddc( I4, I4, 30); 504 lddc( I6, 0, 1 ); 505 506 ldcsr( L0, L1, 0); 507 ldcsr( L1, (1 << 12) - 1, 17 ); 508 509 stc( 31, L4, L5); 510 stc( 30, L6, -(1 << 12) ); 511 512 stdc( 0, L7, G0); 513 stdc( 1, G1, 0 ); 514 515 stcsr( 16, G2, G3); 516 stcsr( 17, G4, 1 ); 517 518 stdcq( 4, G5, G6); 519 stdcq( 5, G7, -1 ); 520 521 bind(lbl1); 522 523 code()->decode(); 524 } 525 #endif 526 527 // Implementation of MacroAssembler 528 529 void MacroAssembler::null_check(Register reg, int offset) { 530 if (needs_explicit_null_check((intptr_t)offset)) { 531 // provoke OS NULL exception if reg = NULL by 532 // accessing M[reg] w/o changing any registers 533 ld_ptr(reg, 0, G0); 534 } 535 else { 536 // nothing to do, (later) access of M[reg + offset] 537 // will provoke OS NULL exception if reg = NULL 538 } 539 } 540 541 // Ring buffer jumps 542 543 #ifndef PRODUCT 544 void MacroAssembler::ret( bool trace ) { if (trace) { 545 mov(I7, O7); // traceable register 546 JMP(O7, 2 * BytesPerInstWord); 547 } else { 548 jmpl( I7, 2 * BytesPerInstWord, G0 ); 549 } 550 } 551 552 void MacroAssembler::retl( bool trace ) { if (trace) JMP(O7, 2 * BytesPerInstWord); 553 else jmpl( O7, 2 * BytesPerInstWord, G0 ); } 554 #endif /* PRODUCT */ 555 556 557 void MacroAssembler::jmp2(Register r1, Register r2, const char* file, int line ) { 558 assert_not_delayed(); 559 // This can only be traceable if r1 & r2 are visible after a window save 560 if (TraceJumps) { 561 #ifndef PRODUCT 562 save_frame(0); 563 verify_thread(); 564 ld(G2_thread, in_bytes(JavaThread::jmp_ring_index_offset()), O0); 565 add(G2_thread, in_bytes(JavaThread::jmp_ring_offset()), O1); 566 sll(O0, exact_log2(4*sizeof(intptr_t)), O2); 567 add(O2, O1, O1); 568 569 add(r1->after_save(), r2->after_save(), O2); 570 set((intptr_t)file, O3); 571 set(line, O4); 572 Label L; 573 // get nearby pc, store jmp target 574 call(L, relocInfo::none); // No relocation for call to pc+0x8 575 delayed()->st(O2, O1, 0); 576 bind(L); 577 578 // store nearby pc 579 st(O7, O1, sizeof(intptr_t)); 580 // store file 581 st(O3, O1, 2*sizeof(intptr_t)); 582 // store line 583 st(O4, O1, 3*sizeof(intptr_t)); 584 add(O0, 1, O0); 585 and3(O0, JavaThread::jump_ring_buffer_size - 1, O0); 586 st(O0, G2_thread, in_bytes(JavaThread::jmp_ring_index_offset())); 587 restore(); 588 #endif /* PRODUCT */ 589 } 590 jmpl(r1, r2, G0); 591 } 592 void MacroAssembler::jmp(Register r1, int offset, const char* file, int line ) { 593 assert_not_delayed(); 594 // This can only be traceable if r1 is visible after a window save 595 if (TraceJumps) { 596 #ifndef PRODUCT 597 save_frame(0); 598 verify_thread(); 599 ld(G2_thread, in_bytes(JavaThread::jmp_ring_index_offset()), O0); 600 add(G2_thread, in_bytes(JavaThread::jmp_ring_offset()), O1); 601 sll(O0, exact_log2(4*sizeof(intptr_t)), O2); 602 add(O2, O1, O1); 603 604 add(r1->after_save(), offset, O2); 605 set((intptr_t)file, O3); 606 set(line, O4); 607 Label L; 608 // get nearby pc, store jmp target 609 call(L, relocInfo::none); // No relocation for call to pc+0x8 610 delayed()->st(O2, O1, 0); 611 bind(L); 612 613 // store nearby pc 614 st(O7, O1, sizeof(intptr_t)); 615 // store file 616 st(O3, O1, 2*sizeof(intptr_t)); 617 // store line 618 st(O4, O1, 3*sizeof(intptr_t)); 619 add(O0, 1, O0); 620 and3(O0, JavaThread::jump_ring_buffer_size - 1, O0); 621 st(O0, G2_thread, in_bytes(JavaThread::jmp_ring_index_offset())); 622 restore(); 623 #endif /* PRODUCT */ 624 } 625 jmp(r1, offset); 626 } 627 628 // This code sequence is relocatable to any address, even on LP64. 629 void MacroAssembler::jumpl(AddressLiteral& addrlit, Register temp, Register d, int offset, const char* file, int line) { 630 assert_not_delayed(); 631 // Force fixed length sethi because NativeJump and NativeFarCall don't handle 632 // variable length instruction streams. 633 patchable_sethi(addrlit, temp); 634 Address a(temp, addrlit.low10() + offset); // Add the offset to the displacement. 635 if (TraceJumps) { 636 #ifndef PRODUCT 637 // Must do the add here so relocation can find the remainder of the 638 // value to be relocated. 639 add(a.base(), a.disp(), a.base(), addrlit.rspec(offset)); 640 save_frame(0); 641 verify_thread(); 642 ld(G2_thread, in_bytes(JavaThread::jmp_ring_index_offset()), O0); 643 add(G2_thread, in_bytes(JavaThread::jmp_ring_offset()), O1); 644 sll(O0, exact_log2(4*sizeof(intptr_t)), O2); 645 add(O2, O1, O1); 646 647 set((intptr_t)file, O3); 648 set(line, O4); 649 Label L; 650 651 // get nearby pc, store jmp target 652 call(L, relocInfo::none); // No relocation for call to pc+0x8 653 delayed()->st(a.base()->after_save(), O1, 0); 654 bind(L); 655 656 // store nearby pc 657 st(O7, O1, sizeof(intptr_t)); 658 // store file 659 st(O3, O1, 2*sizeof(intptr_t)); 660 // store line 661 st(O4, O1, 3*sizeof(intptr_t)); 662 add(O0, 1, O0); 663 and3(O0, JavaThread::jump_ring_buffer_size - 1, O0); 664 st(O0, G2_thread, in_bytes(JavaThread::jmp_ring_index_offset())); 665 restore(); 666 jmpl(a.base(), G0, d); 667 #else 668 jmpl(a.base(), a.disp(), d); 669 #endif /* PRODUCT */ 670 } else { 671 jmpl(a.base(), a.disp(), d); 672 } 673 } 674 675 void MacroAssembler::jump(AddressLiteral& addrlit, Register temp, int offset, const char* file, int line) { 676 jumpl(addrlit, temp, G0, offset, file, line); 677 } 678 679 680 // Convert to C varargs format 681 void MacroAssembler::set_varargs( Argument inArg, Register d ) { 682 // spill register-resident args to their memory slots 683 // (SPARC calling convention requires callers to have already preallocated these) 684 // Note that the inArg might in fact be an outgoing argument, 685 // if a leaf routine or stub does some tricky argument shuffling. 686 // This routine must work even though one of the saved arguments 687 // is in the d register (e.g., set_varargs(Argument(0, false), O0)). 688 for (Argument savePtr = inArg; 689 savePtr.is_register(); 690 savePtr = savePtr.successor()) { 691 st_ptr(savePtr.as_register(), savePtr.address_in_frame()); 692 } 693 // return the address of the first memory slot 694 Address a = inArg.address_in_frame(); 695 add(a.base(), a.disp(), d); 696 } 697 698 // Conditional breakpoint (for assertion checks in assembly code) 699 void MacroAssembler::breakpoint_trap(Condition c, CC cc) { 700 trap(c, cc, G0, ST_RESERVED_FOR_USER_0); 701 } 702 703 // We want to use ST_BREAKPOINT here, but the debugger is confused by it. 704 void MacroAssembler::breakpoint_trap() { 705 trap(ST_RESERVED_FOR_USER_0); 706 } 707 708 // flush windows (except current) using flushw instruction if avail. 709 void MacroAssembler::flush_windows() { 710 if (VM_Version::v9_instructions_work()) flushw(); 711 else flush_windows_trap(); 712 } 713 714 // Write serialization page so VM thread can do a pseudo remote membar 715 // We use the current thread pointer to calculate a thread specific 716 // offset to write to within the page. This minimizes bus traffic 717 // due to cache line collision. 718 void MacroAssembler::serialize_memory(Register thread, Register tmp1, Register tmp2) { 719 srl(thread, os::get_serialize_page_shift_count(), tmp2); 720 if (Assembler::is_simm13(os::vm_page_size())) { 721 and3(tmp2, (os::vm_page_size() - sizeof(int)), tmp2); 722 } 723 else { 724 set((os::vm_page_size() - sizeof(int)), tmp1); 725 and3(tmp2, tmp1, tmp2); 726 } 727 set(os::get_memory_serialize_page(), tmp1); 728 st(G0, tmp1, tmp2); 729 } 730 731 732 733 void MacroAssembler::enter() { 734 Unimplemented(); 735 } 736 737 void MacroAssembler::leave() { 738 Unimplemented(); 739 } 740 741 void MacroAssembler::mult(Register s1, Register s2, Register d) { 742 if(VM_Version::v9_instructions_work()) { 743 mulx (s1, s2, d); 744 } else { 745 smul (s1, s2, d); 746 } 747 } 748 749 void MacroAssembler::mult(Register s1, int simm13a, Register d) { 750 if(VM_Version::v9_instructions_work()) { 751 mulx (s1, simm13a, d); 752 } else { 753 smul (s1, simm13a, d); 754 } 755 } 756 757 758 #ifdef ASSERT 759 void MacroAssembler::read_ccr_v8_assert(Register ccr_save) { 760 const Register s1 = G3_scratch; 761 const Register s2 = G4_scratch; 762 Label get_psr_test; 763 // Get the condition codes the V8 way. 764 read_ccr_trap(s1); 765 mov(ccr_save, s2); 766 // This is a test of V8 which has icc but not xcc 767 // so mask off the xcc bits 768 and3(s2, 0xf, s2); 769 // Compare condition codes from the V8 and V9 ways. 770 subcc(s2, s1, G0); 771 br(Assembler::notEqual, true, Assembler::pt, get_psr_test); 772 delayed()->breakpoint_trap(); 773 bind(get_psr_test); 774 } 775 776 void MacroAssembler::write_ccr_v8_assert(Register ccr_save) { 777 const Register s1 = G3_scratch; 778 const Register s2 = G4_scratch; 779 Label set_psr_test; 780 // Write out the saved condition codes the V8 way 781 write_ccr_trap(ccr_save, s1, s2); 782 // Read back the condition codes using the V9 instruction 783 rdccr(s1); 784 mov(ccr_save, s2); 785 // This is a test of V8 which has icc but not xcc 786 // so mask off the xcc bits 787 and3(s2, 0xf, s2); 788 and3(s1, 0xf, s1); 789 // Compare the V8 way with the V9 way. 790 subcc(s2, s1, G0); 791 br(Assembler::notEqual, true, Assembler::pt, set_psr_test); 792 delayed()->breakpoint_trap(); 793 bind(set_psr_test); 794 } 795 #else 796 #define read_ccr_v8_assert(x) 797 #define write_ccr_v8_assert(x) 798 #endif // ASSERT 799 800 void MacroAssembler::read_ccr(Register ccr_save) { 801 if (VM_Version::v9_instructions_work()) { 802 rdccr(ccr_save); 803 // Test code sequence used on V8. Do not move above rdccr. 804 read_ccr_v8_assert(ccr_save); 805 } else { 806 read_ccr_trap(ccr_save); 807 } 808 } 809 810 void MacroAssembler::write_ccr(Register ccr_save) { 811 if (VM_Version::v9_instructions_work()) { 812 // Test code sequence used on V8. Do not move below wrccr. 813 write_ccr_v8_assert(ccr_save); 814 wrccr(ccr_save); 815 } else { 816 const Register temp_reg1 = G3_scratch; 817 const Register temp_reg2 = G4_scratch; 818 write_ccr_trap(ccr_save, temp_reg1, temp_reg2); 819 } 820 } 821 822 823 // Calls to C land 824 825 #ifdef ASSERT 826 // a hook for debugging 827 static Thread* reinitialize_thread() { 828 return ThreadLocalStorage::thread(); 829 } 830 #else 831 #define reinitialize_thread ThreadLocalStorage::thread 832 #endif 833 834 #ifdef ASSERT 835 address last_get_thread = NULL; 836 #endif 837 838 // call this when G2_thread is not known to be valid 839 void MacroAssembler::get_thread() { 840 save_frame(0); // to avoid clobbering O0 841 mov(G1, L0); // avoid clobbering G1 842 mov(G5_method, L1); // avoid clobbering G5 843 mov(G3, L2); // avoid clobbering G3 also 844 mov(G4, L5); // avoid clobbering G4 845 #ifdef ASSERT 846 AddressLiteral last_get_thread_addrlit(&last_get_thread); 847 set(last_get_thread_addrlit, L3); 848 inc(L4, get_pc(L4) + 2 * BytesPerInstWord); // skip getpc() code + inc + st_ptr to point L4 at call 849 st_ptr(L4, L3, 0); 850 #endif 851 call(CAST_FROM_FN_PTR(address, reinitialize_thread), relocInfo::runtime_call_type); 852 delayed()->nop(); 853 mov(L0, G1); 854 mov(L1, G5_method); 855 mov(L2, G3); 856 mov(L5, G4); 857 restore(O0, 0, G2_thread); 858 } 859 860 static Thread* verify_thread_subroutine(Thread* gthread_value) { 861 Thread* correct_value = ThreadLocalStorage::thread(); 862 guarantee(gthread_value == correct_value, "G2_thread value must be the thread"); 863 return correct_value; 864 } 865 866 void MacroAssembler::verify_thread() { 867 if (VerifyThread) { 868 // NOTE: this chops off the heads of the 64-bit O registers. 869 #ifdef CC_INTERP 870 save_frame(0); 871 #else 872 // make sure G2_thread contains the right value 873 save_frame_and_mov(0, Lmethod, Lmethod); // to avoid clobbering O0 (and propagate Lmethod for -Xprof) 874 mov(G1, L1); // avoid clobbering G1 875 // G2 saved below 876 mov(G3, L3); // avoid clobbering G3 877 mov(G4, L4); // avoid clobbering G4 878 mov(G5_method, L5); // avoid clobbering G5_method 879 #endif /* CC_INTERP */ 880 #if defined(COMPILER2) && !defined(_LP64) 881 // Save & restore possible 64-bit Long arguments in G-regs 882 srlx(G1,32,L0); 883 srlx(G4,32,L6); 884 #endif 885 call(CAST_FROM_FN_PTR(address,verify_thread_subroutine), relocInfo::runtime_call_type); 886 delayed()->mov(G2_thread, O0); 887 888 mov(L1, G1); // Restore G1 889 // G2 restored below 890 mov(L3, G3); // restore G3 891 mov(L4, G4); // restore G4 892 mov(L5, G5_method); // restore G5_method 893 #if defined(COMPILER2) && !defined(_LP64) 894 // Save & restore possible 64-bit Long arguments in G-regs 895 sllx(L0,32,G2); // Move old high G1 bits high in G2 896 sllx(G1, 0,G1); // Clear current high G1 bits 897 or3 (G1,G2,G1); // Recover 64-bit G1 898 sllx(L6,32,G2); // Move old high G4 bits high in G2 899 sllx(G4, 0,G4); // Clear current high G4 bits 900 or3 (G4,G2,G4); // Recover 64-bit G4 901 #endif 902 restore(O0, 0, G2_thread); 903 } 904 } 905 906 907 void MacroAssembler::save_thread(const Register thread_cache) { 908 verify_thread(); 909 if (thread_cache->is_valid()) { 910 assert(thread_cache->is_local() || thread_cache->is_in(), "bad volatile"); 911 mov(G2_thread, thread_cache); 912 } 913 if (VerifyThread) { 914 // smash G2_thread, as if the VM were about to anyway 915 set(0x67676767, G2_thread); 916 } 917 } 918 919 920 void MacroAssembler::restore_thread(const Register thread_cache) { 921 if (thread_cache->is_valid()) { 922 assert(thread_cache->is_local() || thread_cache->is_in(), "bad volatile"); 923 mov(thread_cache, G2_thread); 924 verify_thread(); 925 } else { 926 // do it the slow way 927 get_thread(); 928 } 929 } 930 931 932 // %%% maybe get rid of [re]set_last_Java_frame 933 void MacroAssembler::set_last_Java_frame(Register last_java_sp, Register last_Java_pc) { 934 assert_not_delayed(); 935 Address flags(G2_thread, JavaThread::frame_anchor_offset() + 936 JavaFrameAnchor::flags_offset()); 937 Address pc_addr(G2_thread, JavaThread::last_Java_pc_offset()); 938 939 // Always set last_Java_pc and flags first because once last_Java_sp is visible 940 // has_last_Java_frame is true and users will look at the rest of the fields. 941 // (Note: flags should always be zero before we get here so doesn't need to be set.) 942 943 #ifdef ASSERT 944 // Verify that flags was zeroed on return to Java 945 Label PcOk; 946 save_frame(0); // to avoid clobbering O0 947 ld_ptr(pc_addr, L0); 948 tst(L0); 949 #ifdef _LP64 950 brx(Assembler::zero, false, Assembler::pt, PcOk); 951 #else 952 br(Assembler::zero, false, Assembler::pt, PcOk); 953 #endif // _LP64 954 delayed() -> nop(); 955 stop("last_Java_pc not zeroed before leaving Java"); 956 bind(PcOk); 957 958 // Verify that flags was zeroed on return to Java 959 Label FlagsOk; 960 ld(flags, L0); 961 tst(L0); 962 br(Assembler::zero, false, Assembler::pt, FlagsOk); 963 delayed() -> restore(); 964 stop("flags not zeroed before leaving Java"); 965 bind(FlagsOk); 966 #endif /* ASSERT */ 967 // 968 // When returning from calling out from Java mode the frame anchor's last_Java_pc 969 // will always be set to NULL. It is set here so that if we are doing a call to 970 // native (not VM) that we capture the known pc and don't have to rely on the 971 // native call having a standard frame linkage where we can find the pc. 972 973 if (last_Java_pc->is_valid()) { 974 st_ptr(last_Java_pc, pc_addr); 975 } 976 977 #ifdef _LP64 978 #ifdef ASSERT 979 // Make sure that we have an odd stack 980 Label StackOk; 981 andcc(last_java_sp, 0x01, G0); 982 br(Assembler::notZero, false, Assembler::pt, StackOk); 983 delayed() -> nop(); 984 stop("Stack Not Biased in set_last_Java_frame"); 985 bind(StackOk); 986 #endif // ASSERT 987 assert( last_java_sp != G4_scratch, "bad register usage in set_last_Java_frame"); 988 add( last_java_sp, STACK_BIAS, G4_scratch ); 989 st_ptr(G4_scratch, G2_thread, JavaThread::last_Java_sp_offset()); 990 #else 991 st_ptr(last_java_sp, G2_thread, JavaThread::last_Java_sp_offset()); 992 #endif // _LP64 993 } 994 995 void MacroAssembler::reset_last_Java_frame(void) { 996 assert_not_delayed(); 997 998 Address sp_addr(G2_thread, JavaThread::last_Java_sp_offset()); 999 Address pc_addr(G2_thread, JavaThread::frame_anchor_offset() + JavaFrameAnchor::last_Java_pc_offset()); 1000 Address flags (G2_thread, JavaThread::frame_anchor_offset() + JavaFrameAnchor::flags_offset()); 1001 1002 #ifdef ASSERT 1003 // check that it WAS previously set 1004 #ifdef CC_INTERP 1005 save_frame(0); 1006 #else 1007 save_frame_and_mov(0, Lmethod, Lmethod); // Propagate Lmethod to helper frame for -Xprof 1008 #endif /* CC_INTERP */ 1009 ld_ptr(sp_addr, L0); 1010 tst(L0); 1011 breakpoint_trap(Assembler::zero, Assembler::ptr_cc); 1012 restore(); 1013 #endif // ASSERT 1014 1015 st_ptr(G0, sp_addr); 1016 // Always return last_Java_pc to zero 1017 st_ptr(G0, pc_addr); 1018 // Always null flags after return to Java 1019 st(G0, flags); 1020 } 1021 1022 1023 void MacroAssembler::call_VM_base( 1024 Register oop_result, 1025 Register thread_cache, 1026 Register last_java_sp, 1027 address entry_point, 1028 int number_of_arguments, 1029 bool check_exceptions) 1030 { 1031 assert_not_delayed(); 1032 1033 // determine last_java_sp register 1034 if (!last_java_sp->is_valid()) { 1035 last_java_sp = SP; 1036 } 1037 // debugging support 1038 assert(number_of_arguments >= 0 , "cannot have negative number of arguments"); 1039 1040 // 64-bit last_java_sp is biased! 1041 set_last_Java_frame(last_java_sp, noreg); 1042 if (VerifyThread) mov(G2_thread, O0); // about to be smashed; pass early 1043 save_thread(thread_cache); 1044 // do the call 1045 call(entry_point, relocInfo::runtime_call_type); 1046 if (!VerifyThread) 1047 delayed()->mov(G2_thread, O0); // pass thread as first argument 1048 else 1049 delayed()->nop(); // (thread already passed) 1050 restore_thread(thread_cache); 1051 reset_last_Java_frame(); 1052 1053 // check for pending exceptions. use Gtemp as scratch register. 1054 if (check_exceptions) { 1055 check_and_forward_exception(Gtemp); 1056 } 1057 1058 // get oop result if there is one and reset the value in the thread 1059 if (oop_result->is_valid()) { 1060 get_vm_result(oop_result); 1061 } 1062 } 1063 1064 void MacroAssembler::check_and_forward_exception(Register scratch_reg) 1065 { 1066 Label L; 1067 1068 check_and_handle_popframe(scratch_reg); 1069 check_and_handle_earlyret(scratch_reg); 1070 1071 Address exception_addr(G2_thread, Thread::pending_exception_offset()); 1072 ld_ptr(exception_addr, scratch_reg); 1073 br_null(scratch_reg,false,pt,L); 1074 delayed()->nop(); 1075 // we use O7 linkage so that forward_exception_entry has the issuing PC 1076 call(StubRoutines::forward_exception_entry(), relocInfo::runtime_call_type); 1077 delayed()->nop(); 1078 bind(L); 1079 } 1080 1081 1082 void MacroAssembler::check_and_handle_popframe(Register scratch_reg) { 1083 } 1084 1085 1086 void MacroAssembler::check_and_handle_earlyret(Register scratch_reg) { 1087 } 1088 1089 1090 void MacroAssembler::call_VM(Register oop_result, address entry_point, int number_of_arguments, bool check_exceptions) { 1091 call_VM_base(oop_result, noreg, noreg, entry_point, number_of_arguments, check_exceptions); 1092 } 1093 1094 1095 void MacroAssembler::call_VM(Register oop_result, address entry_point, Register arg_1, bool check_exceptions) { 1096 // O0 is reserved for the thread 1097 mov(arg_1, O1); 1098 call_VM(oop_result, entry_point, 1, check_exceptions); 1099 } 1100 1101 1102 void MacroAssembler::call_VM(Register oop_result, address entry_point, Register arg_1, Register arg_2, bool check_exceptions) { 1103 // O0 is reserved for the thread 1104 mov(arg_1, O1); 1105 mov(arg_2, O2); assert(arg_2 != O1, "smashed argument"); 1106 call_VM(oop_result, entry_point, 2, check_exceptions); 1107 } 1108 1109 1110 void MacroAssembler::call_VM(Register oop_result, address entry_point, Register arg_1, Register arg_2, Register arg_3, bool check_exceptions) { 1111 // O0 is reserved for the thread 1112 mov(arg_1, O1); 1113 mov(arg_2, O2); assert(arg_2 != O1, "smashed argument"); 1114 mov(arg_3, O3); assert(arg_3 != O1 && arg_3 != O2, "smashed argument"); 1115 call_VM(oop_result, entry_point, 3, check_exceptions); 1116 } 1117 1118 1119 1120 // Note: The following call_VM overloadings are useful when a "save" 1121 // has already been performed by a stub, and the last Java frame is 1122 // the previous one. In that case, last_java_sp must be passed as FP 1123 // instead of SP. 1124 1125 1126 void MacroAssembler::call_VM(Register oop_result, Register last_java_sp, address entry_point, int number_of_arguments, bool check_exceptions) { 1127 call_VM_base(oop_result, noreg, last_java_sp, entry_point, number_of_arguments, check_exceptions); 1128 } 1129 1130 1131 void MacroAssembler::call_VM(Register oop_result, Register last_java_sp, address entry_point, Register arg_1, bool check_exceptions) { 1132 // O0 is reserved for the thread 1133 mov(arg_1, O1); 1134 call_VM(oop_result, last_java_sp, entry_point, 1, check_exceptions); 1135 } 1136 1137 1138 void MacroAssembler::call_VM(Register oop_result, Register last_java_sp, address entry_point, Register arg_1, Register arg_2, bool check_exceptions) { 1139 // O0 is reserved for the thread 1140 mov(arg_1, O1); 1141 mov(arg_2, O2); assert(arg_2 != O1, "smashed argument"); 1142 call_VM(oop_result, last_java_sp, entry_point, 2, check_exceptions); 1143 } 1144 1145 1146 void MacroAssembler::call_VM(Register oop_result, Register last_java_sp, address entry_point, Register arg_1, Register arg_2, Register arg_3, bool check_exceptions) { 1147 // O0 is reserved for the thread 1148 mov(arg_1, O1); 1149 mov(arg_2, O2); assert(arg_2 != O1, "smashed argument"); 1150 mov(arg_3, O3); assert(arg_3 != O1 && arg_3 != O2, "smashed argument"); 1151 call_VM(oop_result, last_java_sp, entry_point, 3, check_exceptions); 1152 } 1153 1154 1155 1156 void MacroAssembler::call_VM_leaf_base(Register thread_cache, address entry_point, int number_of_arguments) { 1157 assert_not_delayed(); 1158 save_thread(thread_cache); 1159 // do the call 1160 call(entry_point, relocInfo::runtime_call_type); 1161 delayed()->nop(); 1162 restore_thread(thread_cache); 1163 } 1164 1165 1166 void MacroAssembler::call_VM_leaf(Register thread_cache, address entry_point, int number_of_arguments) { 1167 call_VM_leaf_base(thread_cache, entry_point, number_of_arguments); 1168 } 1169 1170 1171 void MacroAssembler::call_VM_leaf(Register thread_cache, address entry_point, Register arg_1) { 1172 mov(arg_1, O0); 1173 call_VM_leaf(thread_cache, entry_point, 1); 1174 } 1175 1176 1177 void MacroAssembler::call_VM_leaf(Register thread_cache, address entry_point, Register arg_1, Register arg_2) { 1178 mov(arg_1, O0); 1179 mov(arg_2, O1); assert(arg_2 != O0, "smashed argument"); 1180 call_VM_leaf(thread_cache, entry_point, 2); 1181 } 1182 1183 1184 void MacroAssembler::call_VM_leaf(Register thread_cache, address entry_point, Register arg_1, Register arg_2, Register arg_3) { 1185 mov(arg_1, O0); 1186 mov(arg_2, O1); assert(arg_2 != O0, "smashed argument"); 1187 mov(arg_3, O2); assert(arg_3 != O0 && arg_3 != O1, "smashed argument"); 1188 call_VM_leaf(thread_cache, entry_point, 3); 1189 } 1190 1191 1192 void MacroAssembler::get_vm_result(Register oop_result) { 1193 verify_thread(); 1194 Address vm_result_addr(G2_thread, JavaThread::vm_result_offset()); 1195 ld_ptr( vm_result_addr, oop_result); 1196 st_ptr(G0, vm_result_addr); 1197 verify_oop(oop_result); 1198 } 1199 1200 1201 void MacroAssembler::get_vm_result_2(Register oop_result) { 1202 verify_thread(); 1203 Address vm_result_addr_2(G2_thread, JavaThread::vm_result_2_offset()); 1204 ld_ptr(vm_result_addr_2, oop_result); 1205 st_ptr(G0, vm_result_addr_2); 1206 verify_oop(oop_result); 1207 } 1208 1209 1210 // We require that C code which does not return a value in vm_result will 1211 // leave it undisturbed. 1212 void MacroAssembler::set_vm_result(Register oop_result) { 1213 verify_thread(); 1214 Address vm_result_addr(G2_thread, JavaThread::vm_result_offset()); 1215 verify_oop(oop_result); 1216 1217 # ifdef ASSERT 1218 // Check that we are not overwriting any other oop. 1219 #ifdef CC_INTERP 1220 save_frame(0); 1221 #else 1222 save_frame_and_mov(0, Lmethod, Lmethod); // Propagate Lmethod for -Xprof 1223 #endif /* CC_INTERP */ 1224 ld_ptr(vm_result_addr, L0); 1225 tst(L0); 1226 restore(); 1227 breakpoint_trap(notZero, Assembler::ptr_cc); 1228 // } 1229 # endif 1230 1231 st_ptr(oop_result, vm_result_addr); 1232 } 1233 1234 1235 void MacroAssembler::card_table_write(jbyte* byte_map_base, 1236 Register tmp, Register obj) { 1237 #ifdef _LP64 1238 srlx(obj, CardTableModRefBS::card_shift, obj); 1239 #else 1240 srl(obj, CardTableModRefBS::card_shift, obj); 1241 #endif 1242 assert(tmp != obj, "need separate temp reg"); 1243 set((address) byte_map_base, tmp); 1244 stb(G0, tmp, obj); 1245 } 1246 1247 1248 void MacroAssembler::internal_sethi(const AddressLiteral& addrlit, Register d, bool ForceRelocatable) { 1249 address save_pc; 1250 int shiftcnt; 1251 #ifdef _LP64 1252 # ifdef CHECK_DELAY 1253 assert_not_delayed((char*) "cannot put two instructions in delay slot"); 1254 # endif 1255 v9_dep(); 1256 save_pc = pc(); 1257 1258 int msb32 = (int) (addrlit.value() >> 32); 1259 int lsb32 = (int) (addrlit.value()); 1260 1261 if (msb32 == 0 && lsb32 >= 0) { 1262 Assembler::sethi(lsb32, d, addrlit.rspec()); 1263 } 1264 else if (msb32 == -1) { 1265 Assembler::sethi(~lsb32, d, addrlit.rspec()); 1266 xor3(d, ~low10(~0), d); 1267 } 1268 else { 1269 Assembler::sethi(msb32, d, addrlit.rspec()); // msb 22-bits 1270 if (msb32 & 0x3ff) // Any bits? 1271 or3(d, msb32 & 0x3ff, d); // msb 32-bits are now in lsb 32 1272 if (lsb32 & 0xFFFFFC00) { // done? 1273 if ((lsb32 >> 20) & 0xfff) { // Any bits set? 1274 sllx(d, 12, d); // Make room for next 12 bits 1275 or3(d, (lsb32 >> 20) & 0xfff, d); // Or in next 12 1276 shiftcnt = 0; // We already shifted 1277 } 1278 else 1279 shiftcnt = 12; 1280 if ((lsb32 >> 10) & 0x3ff) { 1281 sllx(d, shiftcnt + 10, d); // Make room for last 10 bits 1282 or3(d, (lsb32 >> 10) & 0x3ff, d); // Or in next 10 1283 shiftcnt = 0; 1284 } 1285 else 1286 shiftcnt = 10; 1287 sllx(d, shiftcnt + 10, d); // Shift leaving disp field 0'd 1288 } 1289 else 1290 sllx(d, 32, d); 1291 } 1292 // Pad out the instruction sequence so it can be patched later. 1293 if (ForceRelocatable || (addrlit.rtype() != relocInfo::none && 1294 addrlit.rtype() != relocInfo::runtime_call_type)) { 1295 while (pc() < (save_pc + (7 * BytesPerInstWord))) 1296 nop(); 1297 } 1298 #else 1299 Assembler::sethi(addrlit.value(), d, addrlit.rspec()); 1300 #endif 1301 } 1302 1303 1304 void MacroAssembler::sethi(const AddressLiteral& addrlit, Register d) { 1305 internal_sethi(addrlit, d, false); 1306 } 1307 1308 1309 void MacroAssembler::patchable_sethi(const AddressLiteral& addrlit, Register d) { 1310 internal_sethi(addrlit, d, true); 1311 } 1312 1313 1314 int MacroAssembler::size_of_sethi(address a, bool worst_case) { 1315 #ifdef _LP64 1316 if (worst_case) return 7; 1317 intptr_t iaddr = (intptr_t)a; 1318 int hi32 = (int)(iaddr >> 32); 1319 int lo32 = (int)(iaddr); 1320 int inst_count; 1321 if (hi32 == 0 && lo32 >= 0) 1322 inst_count = 1; 1323 else if (hi32 == -1) 1324 inst_count = 2; 1325 else { 1326 inst_count = 2; 1327 if ( hi32 & 0x3ff ) 1328 inst_count++; 1329 if ( lo32 & 0xFFFFFC00 ) { 1330 if( (lo32 >> 20) & 0xfff ) inst_count += 2; 1331 if( (lo32 >> 10) & 0x3ff ) inst_count += 2; 1332 } 1333 } 1334 return BytesPerInstWord * inst_count; 1335 #else 1336 return BytesPerInstWord; 1337 #endif 1338 } 1339 1340 int MacroAssembler::worst_case_size_of_set() { 1341 return size_of_sethi(NULL, true) + 1; 1342 } 1343 1344 1345 void MacroAssembler::internal_set(const AddressLiteral& addrlit, Register d, bool ForceRelocatable) { 1346 intptr_t value = addrlit.value(); 1347 1348 if (!ForceRelocatable && addrlit.rspec().type() == relocInfo::none) { 1349 // can optimize 1350 if (-4096 <= value && value <= 4095) { 1351 or3(G0, value, d); // setsw (this leaves upper 32 bits sign-extended) 1352 return; 1353 } 1354 if (inv_hi22(hi22(value)) == value) { 1355 sethi(addrlit, d); 1356 return; 1357 } 1358 } 1359 assert_not_delayed((char*) "cannot put two instructions in delay slot"); 1360 internal_sethi(addrlit, d, ForceRelocatable); 1361 if (ForceRelocatable || addrlit.rspec().type() != relocInfo::none || addrlit.low10() != 0) { 1362 add(d, addrlit.low10(), d, addrlit.rspec()); 1363 } 1364 } 1365 1366 void MacroAssembler::set(const AddressLiteral& al, Register d) { 1367 internal_set(al, d, false); 1368 } 1369 1370 void MacroAssembler::set(intptr_t value, Register d) { 1371 AddressLiteral al(value); 1372 internal_set(al, d, false); 1373 } 1374 1375 void MacroAssembler::set(address addr, Register d, RelocationHolder const& rspec) { 1376 AddressLiteral al(addr, rspec); 1377 internal_set(al, d, false); 1378 } 1379 1380 void MacroAssembler::patchable_set(const AddressLiteral& al, Register d) { 1381 internal_set(al, d, true); 1382 } 1383 1384 void MacroAssembler::patchable_set(intptr_t value, Register d) { 1385 AddressLiteral al(value); 1386 internal_set(al, d, true); 1387 } 1388 1389 1390 void MacroAssembler::set64(jlong value, Register d, Register tmp) { 1391 assert_not_delayed(); 1392 v9_dep(); 1393 1394 int hi = (int)(value >> 32); 1395 int lo = (int)(value & ~0); 1396 // (Matcher::isSimpleConstant64 knows about the following optimizations.) 1397 if (Assembler::is_simm13(lo) && value == lo) { 1398 or3(G0, lo, d); 1399 } else if (hi == 0) { 1400 Assembler::sethi(lo, d); // hardware version zero-extends to upper 32 1401 if (low10(lo) != 0) 1402 or3(d, low10(lo), d); 1403 } 1404 else if (hi == -1) { 1405 Assembler::sethi(~lo, d); // hardware version zero-extends to upper 32 1406 xor3(d, low10(lo) ^ ~low10(~0), d); 1407 } 1408 else if (lo == 0) { 1409 if (Assembler::is_simm13(hi)) { 1410 or3(G0, hi, d); 1411 } else { 1412 Assembler::sethi(hi, d); // hardware version zero-extends to upper 32 1413 if (low10(hi) != 0) 1414 or3(d, low10(hi), d); 1415 } 1416 sllx(d, 32, d); 1417 } 1418 else { 1419 Assembler::sethi(hi, tmp); 1420 Assembler::sethi(lo, d); // macro assembler version sign-extends 1421 if (low10(hi) != 0) 1422 or3 (tmp, low10(hi), tmp); 1423 if (low10(lo) != 0) 1424 or3 ( d, low10(lo), d); 1425 sllx(tmp, 32, tmp); 1426 or3 (d, tmp, d); 1427 } 1428 } 1429 1430 // compute size in bytes of sparc frame, given 1431 // number of extraWords 1432 int MacroAssembler::total_frame_size_in_bytes(int extraWords) { 1433 1434 int nWords = frame::memory_parameter_word_sp_offset; 1435 1436 nWords += extraWords; 1437 1438 if (nWords & 1) ++nWords; // round up to double-word 1439 1440 return nWords * BytesPerWord; 1441 } 1442 1443 1444 // save_frame: given number of "extra" words in frame, 1445 // issue approp. save instruction (p 200, v8 manual) 1446 1447 void MacroAssembler::save_frame(int extraWords = 0) { 1448 int delta = -total_frame_size_in_bytes(extraWords); 1449 if (is_simm13(delta)) { 1450 save(SP, delta, SP); 1451 } else { 1452 set(delta, G3_scratch); 1453 save(SP, G3_scratch, SP); 1454 } 1455 } 1456 1457 1458 void MacroAssembler::save_frame_c1(int size_in_bytes) { 1459 if (is_simm13(-size_in_bytes)) { 1460 save(SP, -size_in_bytes, SP); 1461 } else { 1462 set(-size_in_bytes, G3_scratch); 1463 save(SP, G3_scratch, SP); 1464 } 1465 } 1466 1467 1468 void MacroAssembler::save_frame_and_mov(int extraWords, 1469 Register s1, Register d1, 1470 Register s2, Register d2) { 1471 assert_not_delayed(); 1472 1473 // The trick here is to use precisely the same memory word 1474 // that trap handlers also use to save the register. 1475 // This word cannot be used for any other purpose, but 1476 // it works fine to save the register's value, whether or not 1477 // an interrupt flushes register windows at any given moment! 1478 Address s1_addr; 1479 if (s1->is_valid() && (s1->is_in() || s1->is_local())) { 1480 s1_addr = s1->address_in_saved_window(); 1481 st_ptr(s1, s1_addr); 1482 } 1483 1484 Address s2_addr; 1485 if (s2->is_valid() && (s2->is_in() || s2->is_local())) { 1486 s2_addr = s2->address_in_saved_window(); 1487 st_ptr(s2, s2_addr); 1488 } 1489 1490 save_frame(extraWords); 1491 1492 if (s1_addr.base() == SP) { 1493 ld_ptr(s1_addr.after_save(), d1); 1494 } else if (s1->is_valid()) { 1495 mov(s1->after_save(), d1); 1496 } 1497 1498 if (s2_addr.base() == SP) { 1499 ld_ptr(s2_addr.after_save(), d2); 1500 } else if (s2->is_valid()) { 1501 mov(s2->after_save(), d2); 1502 } 1503 } 1504 1505 1506 AddressLiteral MacroAssembler::allocate_oop_address(jobject obj) { 1507 assert(oop_recorder() != NULL, "this assembler needs an OopRecorder"); 1508 int oop_index = oop_recorder()->allocate_index(obj); 1509 return AddressLiteral(obj, oop_Relocation::spec(oop_index)); 1510 } 1511 1512 1513 AddressLiteral MacroAssembler::constant_oop_address(jobject obj) { 1514 assert(oop_recorder() != NULL, "this assembler needs an OopRecorder"); 1515 int oop_index = oop_recorder()->find_index(obj); 1516 return AddressLiteral(obj, oop_Relocation::spec(oop_index)); 1517 } 1518 1519 void MacroAssembler::set_narrow_oop(jobject obj, Register d) { 1520 assert(oop_recorder() != NULL, "this assembler needs an OopRecorder"); 1521 int oop_index = oop_recorder()->find_index(obj); 1522 RelocationHolder rspec = oop_Relocation::spec(oop_index); 1523 1524 assert_not_delayed(); 1525 // Relocation with special format (see relocInfo_sparc.hpp). 1526 relocate(rspec, 1); 1527 // Assembler::sethi(0x3fffff, d); 1528 emit_long( op(branch_op) | rd(d) | op2(sethi_op2) | hi22(0x3fffff) ); 1529 // Don't add relocation for 'add'. Do patching during 'sethi' processing. 1530 add(d, 0x3ff, d); 1531 1532 } 1533 1534 1535 void MacroAssembler::align(int modulus) { 1536 while (offset() % modulus != 0) nop(); 1537 } 1538 1539 1540 void MacroAssembler::safepoint() { 1541 relocate(breakpoint_Relocation::spec(breakpoint_Relocation::safepoint)); 1542 } 1543 1544 1545 void RegistersForDebugging::print(outputStream* s) { 1546 int j; 1547 for ( j = 0; j < 8; ++j ) 1548 if ( j != 6 ) s->print_cr("i%d = 0x%.16lx", j, i[j]); 1549 else s->print_cr( "fp = 0x%.16lx", i[j]); 1550 s->cr(); 1551 1552 for ( j = 0; j < 8; ++j ) 1553 s->print_cr("l%d = 0x%.16lx", j, l[j]); 1554 s->cr(); 1555 1556 for ( j = 0; j < 8; ++j ) 1557 if ( j != 6 ) s->print_cr("o%d = 0x%.16lx", j, o[j]); 1558 else s->print_cr( "sp = 0x%.16lx", o[j]); 1559 s->cr(); 1560 1561 for ( j = 0; j < 8; ++j ) 1562 s->print_cr("g%d = 0x%.16lx", j, g[j]); 1563 s->cr(); 1564 1565 // print out floats with compression 1566 for (j = 0; j < 32; ) { 1567 jfloat val = f[j]; 1568 int last = j; 1569 for ( ; last+1 < 32; ++last ) { 1570 char b1[1024], b2[1024]; 1571 sprintf(b1, "%f", val); 1572 sprintf(b2, "%f", f[last+1]); 1573 if (strcmp(b1, b2)) 1574 break; 1575 } 1576 s->print("f%d", j); 1577 if ( j != last ) s->print(" - f%d", last); 1578 s->print(" = %f", val); 1579 s->fill_to(25); 1580 s->print_cr(" (0x%x)", val); 1581 j = last + 1; 1582 } 1583 s->cr(); 1584 1585 // and doubles (evens only) 1586 for (j = 0; j < 32; ) { 1587 jdouble val = d[j]; 1588 int last = j; 1589 for ( ; last+1 < 32; ++last ) { 1590 char b1[1024], b2[1024]; 1591 sprintf(b1, "%f", val); 1592 sprintf(b2, "%f", d[last+1]); 1593 if (strcmp(b1, b2)) 1594 break; 1595 } 1596 s->print("d%d", 2 * j); 1597 if ( j != last ) s->print(" - d%d", last); 1598 s->print(" = %f", val); 1599 s->fill_to(30); 1600 s->print("(0x%x)", *(int*)&val); 1601 s->fill_to(42); 1602 s->print_cr("(0x%x)", *(1 + (int*)&val)); 1603 j = last + 1; 1604 } 1605 s->cr(); 1606 } 1607 1608 void RegistersForDebugging::save_registers(MacroAssembler* a) { 1609 a->sub(FP, round_to(sizeof(RegistersForDebugging), sizeof(jdouble)) - STACK_BIAS, O0); 1610 a->flush_windows(); 1611 int i; 1612 for (i = 0; i < 8; ++i) { 1613 a->ld_ptr(as_iRegister(i)->address_in_saved_window().after_save(), L1); a->st_ptr( L1, O0, i_offset(i)); 1614 a->ld_ptr(as_lRegister(i)->address_in_saved_window().after_save(), L1); a->st_ptr( L1, O0, l_offset(i)); 1615 a->st_ptr(as_oRegister(i)->after_save(), O0, o_offset(i)); 1616 a->st_ptr(as_gRegister(i)->after_save(), O0, g_offset(i)); 1617 } 1618 for (i = 0; i < 32; ++i) { 1619 a->stf(FloatRegisterImpl::S, as_FloatRegister(i), O0, f_offset(i)); 1620 } 1621 for (i = 0; i < (VM_Version::v9_instructions_work() ? 64 : 32); i += 2) { 1622 a->stf(FloatRegisterImpl::D, as_FloatRegister(i), O0, d_offset(i)); 1623 } 1624 } 1625 1626 void RegistersForDebugging::restore_registers(MacroAssembler* a, Register r) { 1627 for (int i = 1; i < 8; ++i) { 1628 a->ld_ptr(r, g_offset(i), as_gRegister(i)); 1629 } 1630 for (int j = 0; j < 32; ++j) { 1631 a->ldf(FloatRegisterImpl::S, O0, f_offset(j), as_FloatRegister(j)); 1632 } 1633 for (int k = 0; k < (VM_Version::v9_instructions_work() ? 64 : 32); k += 2) { 1634 a->ldf(FloatRegisterImpl::D, O0, d_offset(k), as_FloatRegister(k)); 1635 } 1636 } 1637 1638 1639 // pushes double TOS element of FPU stack on CPU stack; pops from FPU stack 1640 void MacroAssembler::push_fTOS() { 1641 // %%%%%% need to implement this 1642 } 1643 1644 // pops double TOS element from CPU stack and pushes on FPU stack 1645 void MacroAssembler::pop_fTOS() { 1646 // %%%%%% need to implement this 1647 } 1648 1649 void MacroAssembler::empty_FPU_stack() { 1650 // %%%%%% need to implement this 1651 } 1652 1653 void MacroAssembler::_verify_oop(Register reg, const char* msg, const char * file, int line) { 1654 // plausibility check for oops 1655 if (!VerifyOops) return; 1656 1657 if (reg == G0) return; // always NULL, which is always an oop 1658 1659 char buffer[64]; 1660 #ifdef COMPILER1 1661 if (CommentedAssembly) { 1662 snprintf(buffer, sizeof(buffer), "verify_oop at %d", offset()); 1663 block_comment(buffer); 1664 } 1665 #endif 1666 1667 int len = strlen(file) + strlen(msg) + 1 + 4; 1668 sprintf(buffer, "%d", line); 1669 len += strlen(buffer); 1670 sprintf(buffer, " at offset %d ", offset()); 1671 len += strlen(buffer); 1672 char * real_msg = new char[len]; 1673 sprintf(real_msg, "%s%s(%s:%d)", msg, buffer, file, line); 1674 1675 // Call indirectly to solve generation ordering problem 1676 AddressLiteral a(StubRoutines::verify_oop_subroutine_entry_address()); 1677 1678 // Make some space on stack above the current register window. 1679 // Enough to hold 8 64-bit registers. 1680 add(SP,-8*8,SP); 1681 1682 // Save some 64-bit registers; a normal 'save' chops the heads off 1683 // of 64-bit longs in the 32-bit build. 1684 stx(O0,SP,frame::register_save_words*wordSize+STACK_BIAS+0*8); 1685 stx(O1,SP,frame::register_save_words*wordSize+STACK_BIAS+1*8); 1686 mov(reg,O0); // Move arg into O0; arg might be in O7 which is about to be crushed 1687 stx(O7,SP,frame::register_save_words*wordSize+STACK_BIAS+7*8); 1688 1689 set((intptr_t)real_msg, O1); 1690 // Load address to call to into O7 1691 load_ptr_contents(a, O7); 1692 // Register call to verify_oop_subroutine 1693 callr(O7, G0); 1694 delayed()->nop(); 1695 // recover frame size 1696 add(SP, 8*8,SP); 1697 } 1698 1699 void MacroAssembler::_verify_oop_addr(Address addr, const char* msg, const char * file, int line) { 1700 // plausibility check for oops 1701 if (!VerifyOops) return; 1702 1703 char buffer[64]; 1704 sprintf(buffer, "%d", line); 1705 int len = strlen(file) + strlen(msg) + 1 + 4 + strlen(buffer); 1706 sprintf(buffer, " at SP+%d ", addr.disp()); 1707 len += strlen(buffer); 1708 char * real_msg = new char[len]; 1709 sprintf(real_msg, "%s at SP+%d (%s:%d)", msg, addr.disp(), file, line); 1710 1711 // Call indirectly to solve generation ordering problem 1712 AddressLiteral a(StubRoutines::verify_oop_subroutine_entry_address()); 1713 1714 // Make some space on stack above the current register window. 1715 // Enough to hold 8 64-bit registers. 1716 add(SP,-8*8,SP); 1717 1718 // Save some 64-bit registers; a normal 'save' chops the heads off 1719 // of 64-bit longs in the 32-bit build. 1720 stx(O0,SP,frame::register_save_words*wordSize+STACK_BIAS+0*8); 1721 stx(O1,SP,frame::register_save_words*wordSize+STACK_BIAS+1*8); 1722 ld_ptr(addr.base(), addr.disp() + 8*8, O0); // Load arg into O0; arg might be in O7 which is about to be crushed 1723 stx(O7,SP,frame::register_save_words*wordSize+STACK_BIAS+7*8); 1724 1725 set((intptr_t)real_msg, O1); 1726 // Load address to call to into O7 1727 load_ptr_contents(a, O7); 1728 // Register call to verify_oop_subroutine 1729 callr(O7, G0); 1730 delayed()->nop(); 1731 // recover frame size 1732 add(SP, 8*8,SP); 1733 } 1734 1735 // side-door communication with signalHandler in os_solaris.cpp 1736 address MacroAssembler::_verify_oop_implicit_branch[3] = { NULL }; 1737 1738 // This macro is expanded just once; it creates shared code. Contract: 1739 // receives an oop in O0. Must restore O0 & O7 from TLS. Must not smash ANY 1740 // registers, including flags. May not use a register 'save', as this blows 1741 // the high bits of the O-regs if they contain Long values. Acts as a 'leaf' 1742 // call. 1743 void MacroAssembler::verify_oop_subroutine() { 1744 assert( VM_Version::v9_instructions_work(), "VerifyOops not supported for V8" ); 1745 1746 // Leaf call; no frame. 1747 Label succeed, fail, null_or_fail; 1748 1749 // O0 and O7 were saved already (O0 in O0's TLS home, O7 in O5's TLS home). 1750 // O0 is now the oop to be checked. O7 is the return address. 1751 Register O0_obj = O0; 1752 1753 // Save some more registers for temps. 1754 stx(O2,SP,frame::register_save_words*wordSize+STACK_BIAS+2*8); 1755 stx(O3,SP,frame::register_save_words*wordSize+STACK_BIAS+3*8); 1756 stx(O4,SP,frame::register_save_words*wordSize+STACK_BIAS+4*8); 1757 stx(O5,SP,frame::register_save_words*wordSize+STACK_BIAS+5*8); 1758 1759 // Save flags 1760 Register O5_save_flags = O5; 1761 rdccr( O5_save_flags ); 1762 1763 { // count number of verifies 1764 Register O2_adr = O2; 1765 Register O3_accum = O3; 1766 inc_counter(StubRoutines::verify_oop_count_addr(), O2_adr, O3_accum); 1767 } 1768 1769 Register O2_mask = O2; 1770 Register O3_bits = O3; 1771 Register O4_temp = O4; 1772 1773 // mark lower end of faulting range 1774 assert(_verify_oop_implicit_branch[0] == NULL, "set once"); 1775 _verify_oop_implicit_branch[0] = pc(); 1776 1777 // We can't check the mark oop because it could be in the process of 1778 // locking or unlocking while this is running. 1779 set(Universe::verify_oop_mask (), O2_mask); 1780 set(Universe::verify_oop_bits (), O3_bits); 1781 1782 // assert((obj & oop_mask) == oop_bits); 1783 and3(O0_obj, O2_mask, O4_temp); 1784 cmp(O4_temp, O3_bits); 1785 brx(notEqual, false, pn, null_or_fail); 1786 delayed()->nop(); 1787 1788 if ((NULL_WORD & Universe::verify_oop_mask()) == Universe::verify_oop_bits()) { 1789 // the null_or_fail case is useless; must test for null separately 1790 br_null(O0_obj, false, pn, succeed); 1791 delayed()->nop(); 1792 } 1793 1794 // Check the klassOop of this object for being in the right area of memory. 1795 // Cannot do the load in the delay above slot in case O0 is null 1796 load_klass(O0_obj, O0_obj); 1797 // assert((klass & klass_mask) == klass_bits); 1798 if( Universe::verify_klass_mask() != Universe::verify_oop_mask() ) 1799 set(Universe::verify_klass_mask(), O2_mask); 1800 if( Universe::verify_klass_bits() != Universe::verify_oop_bits() ) 1801 set(Universe::verify_klass_bits(), O3_bits); 1802 and3(O0_obj, O2_mask, O4_temp); 1803 cmp(O4_temp, O3_bits); 1804 brx(notEqual, false, pn, fail); 1805 delayed()->nop(); 1806 // Check the klass's klass 1807 load_klass(O0_obj, O0_obj); 1808 and3(O0_obj, O2_mask, O4_temp); 1809 cmp(O4_temp, O3_bits); 1810 brx(notEqual, false, pn, fail); 1811 delayed()->wrccr( O5_save_flags ); // Restore CCR's 1812 1813 // mark upper end of faulting range 1814 _verify_oop_implicit_branch[1] = pc(); 1815 1816 //----------------------- 1817 // all tests pass 1818 bind(succeed); 1819 1820 // Restore prior 64-bit registers 1821 ldx(SP,frame::register_save_words*wordSize+STACK_BIAS+0*8,O0); 1822 ldx(SP,frame::register_save_words*wordSize+STACK_BIAS+1*8,O1); 1823 ldx(SP,frame::register_save_words*wordSize+STACK_BIAS+2*8,O2); 1824 ldx(SP,frame::register_save_words*wordSize+STACK_BIAS+3*8,O3); 1825 ldx(SP,frame::register_save_words*wordSize+STACK_BIAS+4*8,O4); 1826 ldx(SP,frame::register_save_words*wordSize+STACK_BIAS+5*8,O5); 1827 1828 retl(); // Leaf return; restore prior O7 in delay slot 1829 delayed()->ldx(SP,frame::register_save_words*wordSize+STACK_BIAS+7*8,O7); 1830 1831 //----------------------- 1832 bind(null_or_fail); // nulls are less common but OK 1833 br_null(O0_obj, false, pt, succeed); 1834 delayed()->wrccr( O5_save_flags ); // Restore CCR's 1835 1836 //----------------------- 1837 // report failure: 1838 bind(fail); 1839 _verify_oop_implicit_branch[2] = pc(); 1840 1841 wrccr( O5_save_flags ); // Restore CCR's 1842 1843 save_frame(::round_to(sizeof(RegistersForDebugging) / BytesPerWord, 2)); 1844 1845 // stop_subroutine expects message pointer in I1. 1846 mov(I1, O1); 1847 1848 // Restore prior 64-bit registers 1849 ldx(FP,frame::register_save_words*wordSize+STACK_BIAS+0*8,I0); 1850 ldx(FP,frame::register_save_words*wordSize+STACK_BIAS+1*8,I1); 1851 ldx(FP,frame::register_save_words*wordSize+STACK_BIAS+2*8,I2); 1852 ldx(FP,frame::register_save_words*wordSize+STACK_BIAS+3*8,I3); 1853 ldx(FP,frame::register_save_words*wordSize+STACK_BIAS+4*8,I4); 1854 ldx(FP,frame::register_save_words*wordSize+STACK_BIAS+5*8,I5); 1855 1856 // factor long stop-sequence into subroutine to save space 1857 assert(StubRoutines::Sparc::stop_subroutine_entry_address(), "hasn't been generated yet"); 1858 1859 // call indirectly to solve generation ordering problem 1860 AddressLiteral al(StubRoutines::Sparc::stop_subroutine_entry_address()); 1861 load_ptr_contents(al, O5); 1862 jmpl(O5, 0, O7); 1863 delayed()->nop(); 1864 } 1865 1866 1867 void MacroAssembler::stop(const char* msg) { 1868 // save frame first to get O7 for return address 1869 // add one word to size in case struct is odd number of words long 1870 // It must be doubleword-aligned for storing doubles into it. 1871 1872 save_frame(::round_to(sizeof(RegistersForDebugging) / BytesPerWord, 2)); 1873 1874 // stop_subroutine expects message pointer in I1. 1875 set((intptr_t)msg, O1); 1876 1877 // factor long stop-sequence into subroutine to save space 1878 assert(StubRoutines::Sparc::stop_subroutine_entry_address(), "hasn't been generated yet"); 1879 1880 // call indirectly to solve generation ordering problem 1881 AddressLiteral a(StubRoutines::Sparc::stop_subroutine_entry_address()); 1882 load_ptr_contents(a, O5); 1883 jmpl(O5, 0, O7); 1884 delayed()->nop(); 1885 1886 breakpoint_trap(); // make stop actually stop rather than writing 1887 // unnoticeable results in the output files. 1888 1889 // restore(); done in callee to save space! 1890 } 1891 1892 1893 void MacroAssembler::warn(const char* msg) { 1894 save_frame(::round_to(sizeof(RegistersForDebugging) / BytesPerWord, 2)); 1895 RegistersForDebugging::save_registers(this); 1896 mov(O0, L0); 1897 set((intptr_t)msg, O0); 1898 call( CAST_FROM_FN_PTR(address, warning) ); 1899 delayed()->nop(); 1900 // ret(); 1901 // delayed()->restore(); 1902 RegistersForDebugging::restore_registers(this, L0); 1903 restore(); 1904 } 1905 1906 1907 void MacroAssembler::untested(const char* what) { 1908 // We must be able to turn interactive prompting off 1909 // in order to run automated test scripts on the VM 1910 // Use the flag ShowMessageBoxOnError 1911 1912 char* b = new char[1024]; 1913 sprintf(b, "untested: %s", what); 1914 1915 if ( ShowMessageBoxOnError ) stop(b); 1916 else warn(b); 1917 } 1918 1919 1920 void MacroAssembler::stop_subroutine() { 1921 RegistersForDebugging::save_registers(this); 1922 1923 // for the sake of the debugger, stick a PC on the current frame 1924 // (this assumes that the caller has performed an extra "save") 1925 mov(I7, L7); 1926 add(O7, -7 * BytesPerInt, I7); 1927 1928 save_frame(); // one more save to free up another O7 register 1929 mov(I0, O1); // addr of reg save area 1930 1931 // We expect pointer to message in I1. Caller must set it up in O1 1932 mov(I1, O0); // get msg 1933 call (CAST_FROM_FN_PTR(address, MacroAssembler::debug), relocInfo::runtime_call_type); 1934 delayed()->nop(); 1935 1936 restore(); 1937 1938 RegistersForDebugging::restore_registers(this, O0); 1939 1940 save_frame(0); 1941 call(CAST_FROM_FN_PTR(address,breakpoint)); 1942 delayed()->nop(); 1943 restore(); 1944 1945 mov(L7, I7); 1946 retl(); 1947 delayed()->restore(); // see stop above 1948 } 1949 1950 1951 void MacroAssembler::debug(char* msg, RegistersForDebugging* regs) { 1952 if ( ShowMessageBoxOnError ) { 1953 JavaThreadState saved_state = JavaThread::current()->thread_state(); 1954 JavaThread::current()->set_thread_state(_thread_in_vm); 1955 { 1956 // In order to get locks work, we need to fake a in_VM state 1957 ttyLocker ttyl; 1958 ::tty->print_cr("EXECUTION STOPPED: %s\n", msg); 1959 if (CountBytecodes || TraceBytecodes || StopInterpreterAt) { 1960 ::tty->print_cr("Interpreter::bytecode_counter = %d", BytecodeCounter::counter_value()); 1961 } 1962 if (os::message_box(msg, "Execution stopped, print registers?")) 1963 regs->print(::tty); 1964 } 1965 ThreadStateTransition::transition(JavaThread::current(), _thread_in_vm, saved_state); 1966 } 1967 else 1968 ::tty->print_cr("=============== DEBUG MESSAGE: %s ================\n", msg); 1969 assert(false, "error"); 1970 } 1971 1972 1973 #ifndef PRODUCT 1974 void MacroAssembler::test() { 1975 ResourceMark rm; 1976 1977 CodeBuffer cb("test", 10000, 10000); 1978 MacroAssembler* a = new MacroAssembler(&cb); 1979 VM_Version::allow_all(); 1980 a->test_v9(); 1981 a->test_v8_onlys(); 1982 VM_Version::revert(); 1983 1984 StubRoutines::Sparc::test_stop_entry()(); 1985 } 1986 #endif 1987 1988 1989 void MacroAssembler::calc_mem_param_words(Register Rparam_words, Register Rresult) { 1990 subcc( Rparam_words, Argument::n_register_parameters, Rresult); // how many mem words? 1991 Label no_extras; 1992 br( negative, true, pt, no_extras ); // if neg, clear reg 1993 delayed()->set(0, Rresult); // annuled, so only if taken 1994 bind( no_extras ); 1995 } 1996 1997 1998 void MacroAssembler::calc_frame_size(Register Rextra_words, Register Rresult) { 1999 #ifdef _LP64 2000 add(Rextra_words, frame::memory_parameter_word_sp_offset, Rresult); 2001 #else 2002 add(Rextra_words, frame::memory_parameter_word_sp_offset + 1, Rresult); 2003 #endif 2004 bclr(1, Rresult); 2005 sll(Rresult, LogBytesPerWord, Rresult); // Rresult has total frame bytes 2006 } 2007 2008 2009 void MacroAssembler::calc_frame_size_and_save(Register Rextra_words, Register Rresult) { 2010 calc_frame_size(Rextra_words, Rresult); 2011 neg(Rresult); 2012 save(SP, Rresult, SP); 2013 } 2014 2015 2016 // --------------------------------------------------------- 2017 Assembler::RCondition cond2rcond(Assembler::Condition c) { 2018 switch (c) { 2019 /*case zero: */ 2020 case Assembler::equal: return Assembler::rc_z; 2021 case Assembler::lessEqual: return Assembler::rc_lez; 2022 case Assembler::less: return Assembler::rc_lz; 2023 /*case notZero:*/ 2024 case Assembler::notEqual: return Assembler::rc_nz; 2025 case Assembler::greater: return Assembler::rc_gz; 2026 case Assembler::greaterEqual: return Assembler::rc_gez; 2027 } 2028 ShouldNotReachHere(); 2029 return Assembler::rc_z; 2030 } 2031 2032 // compares register with zero and branches. NOT FOR USE WITH 64-bit POINTERS 2033 void MacroAssembler::br_zero( Condition c, bool a, Predict p, Register s1, Label& L) { 2034 tst(s1); 2035 br (c, a, p, L); 2036 } 2037 2038 2039 // Compares a pointer register with zero and branches on null. 2040 // Does a test & branch on 32-bit systems and a register-branch on 64-bit. 2041 void MacroAssembler::br_null( Register s1, bool a, Predict p, Label& L ) { 2042 assert_not_delayed(); 2043 #ifdef _LP64 2044 bpr( rc_z, a, p, s1, L ); 2045 #else 2046 tst(s1); 2047 br ( zero, a, p, L ); 2048 #endif 2049 } 2050 2051 void MacroAssembler::br_notnull( Register s1, bool a, Predict p, Label& L ) { 2052 assert_not_delayed(); 2053 #ifdef _LP64 2054 bpr( rc_nz, a, p, s1, L ); 2055 #else 2056 tst(s1); 2057 br ( notZero, a, p, L ); 2058 #endif 2059 } 2060 2061 void MacroAssembler::br_on_reg_cond( RCondition rc, bool a, Predict p, 2062 Register s1, address d, 2063 relocInfo::relocType rt ) { 2064 if (VM_Version::v9_instructions_work()) { 2065 bpr(rc, a, p, s1, d, rt); 2066 } else { 2067 tst(s1); 2068 br(reg_cond_to_cc_cond(rc), a, p, d, rt); 2069 } 2070 } 2071 2072 void MacroAssembler::br_on_reg_cond( RCondition rc, bool a, Predict p, 2073 Register s1, Label& L ) { 2074 if (VM_Version::v9_instructions_work()) { 2075 bpr(rc, a, p, s1, L); 2076 } else { 2077 tst(s1); 2078 br(reg_cond_to_cc_cond(rc), a, p, L); 2079 } 2080 } 2081 2082 2083 // instruction sequences factored across compiler & interpreter 2084 2085 2086 void MacroAssembler::lcmp( Register Ra_hi, Register Ra_low, 2087 Register Rb_hi, Register Rb_low, 2088 Register Rresult) { 2089 2090 Label check_low_parts, done; 2091 2092 cmp(Ra_hi, Rb_hi ); // compare hi parts 2093 br(equal, true, pt, check_low_parts); 2094 delayed()->cmp(Ra_low, Rb_low); // test low parts 2095 2096 // And, with an unsigned comparison, it does not matter if the numbers 2097 // are negative or not. 2098 // E.g., -2 cmp -1: the low parts are 0xfffffffe and 0xffffffff. 2099 // The second one is bigger (unsignedly). 2100 2101 // Other notes: The first move in each triplet can be unconditional 2102 // (and therefore probably prefetchable). 2103 // And the equals case for the high part does not need testing, 2104 // since that triplet is reached only after finding the high halves differ. 2105 2106 if (VM_Version::v9_instructions_work()) { 2107 2108 mov ( -1, Rresult); 2109 ba( false, done ); delayed()-> movcc(greater, false, icc, 1, Rresult); 2110 } 2111 else { 2112 br(less, true, pt, done); delayed()-> set(-1, Rresult); 2113 br(greater, true, pt, done); delayed()-> set( 1, Rresult); 2114 } 2115 2116 bind( check_low_parts ); 2117 2118 if (VM_Version::v9_instructions_work()) { 2119 mov( -1, Rresult); 2120 movcc(equal, false, icc, 0, Rresult); 2121 movcc(greaterUnsigned, false, icc, 1, Rresult); 2122 } 2123 else { 2124 set(-1, Rresult); 2125 br(equal, true, pt, done); delayed()->set( 0, Rresult); 2126 br(greaterUnsigned, true, pt, done); delayed()->set( 1, Rresult); 2127 } 2128 bind( done ); 2129 } 2130 2131 void MacroAssembler::lneg( Register Rhi, Register Rlow ) { 2132 subcc( G0, Rlow, Rlow ); 2133 subc( G0, Rhi, Rhi ); 2134 } 2135 2136 void MacroAssembler::lshl( Register Rin_high, Register Rin_low, 2137 Register Rcount, 2138 Register Rout_high, Register Rout_low, 2139 Register Rtemp ) { 2140 2141 2142 Register Ralt_count = Rtemp; 2143 Register Rxfer_bits = Rtemp; 2144 2145 assert( Ralt_count != Rin_high 2146 && Ralt_count != Rin_low 2147 && Ralt_count != Rcount 2148 && Rxfer_bits != Rin_low 2149 && Rxfer_bits != Rin_high 2150 && Rxfer_bits != Rcount 2151 && Rxfer_bits != Rout_low 2152 && Rout_low != Rin_high, 2153 "register alias checks"); 2154 2155 Label big_shift, done; 2156 2157 // This code can be optimized to use the 64 bit shifts in V9. 2158 // Here we use the 32 bit shifts. 2159 2160 and3( Rcount, 0x3f, Rcount); // take least significant 6 bits 2161 subcc(Rcount, 31, Ralt_count); 2162 br(greater, true, pn, big_shift); 2163 delayed()-> 2164 dec(Ralt_count); 2165 2166 // shift < 32 bits, Ralt_count = Rcount-31 2167 2168 // We get the transfer bits by shifting right by 32-count the low 2169 // register. This is done by shifting right by 31-count and then by one 2170 // more to take care of the special (rare) case where count is zero 2171 // (shifting by 32 would not work). 2172 2173 neg( Ralt_count ); 2174 2175 // The order of the next two instructions is critical in the case where 2176 // Rin and Rout are the same and should not be reversed. 2177 2178 srl( Rin_low, Ralt_count, Rxfer_bits ); // shift right by 31-count 2179 if (Rcount != Rout_low) { 2180 sll( Rin_low, Rcount, Rout_low ); // low half 2181 } 2182 sll( Rin_high, Rcount, Rout_high ); 2183 if (Rcount == Rout_low) { 2184 sll( Rin_low, Rcount, Rout_low ); // low half 2185 } 2186 srl( Rxfer_bits, 1, Rxfer_bits ); // shift right by one more 2187 ba (false, done); 2188 delayed()-> 2189 or3( Rout_high, Rxfer_bits, Rout_high); // new hi value: or in shifted old hi part and xfer from low 2190 2191 // shift >= 32 bits, Ralt_count = Rcount-32 2192 bind(big_shift); 2193 sll( Rin_low, Ralt_count, Rout_high ); 2194 clr( Rout_low ); 2195 2196 bind(done); 2197 } 2198 2199 2200 void MacroAssembler::lshr( Register Rin_high, Register Rin_low, 2201 Register Rcount, 2202 Register Rout_high, Register Rout_low, 2203 Register Rtemp ) { 2204 2205 Register Ralt_count = Rtemp; 2206 Register Rxfer_bits = Rtemp; 2207 2208 assert( Ralt_count != Rin_high 2209 && Ralt_count != Rin_low 2210 && Ralt_count != Rcount 2211 && Rxfer_bits != Rin_low 2212 && Rxfer_bits != Rin_high 2213 && Rxfer_bits != Rcount 2214 && Rxfer_bits != Rout_high 2215 && Rout_high != Rin_low, 2216 "register alias checks"); 2217 2218 Label big_shift, done; 2219 2220 // This code can be optimized to use the 64 bit shifts in V9. 2221 // Here we use the 32 bit shifts. 2222 2223 and3( Rcount, 0x3f, Rcount); // take least significant 6 bits 2224 subcc(Rcount, 31, Ralt_count); 2225 br(greater, true, pn, big_shift); 2226 delayed()->dec(Ralt_count); 2227 2228 // shift < 32 bits, Ralt_count = Rcount-31 2229 2230 // We get the transfer bits by shifting left by 32-count the high 2231 // register. This is done by shifting left by 31-count and then by one 2232 // more to take care of the special (rare) case where count is zero 2233 // (shifting by 32 would not work). 2234 2235 neg( Ralt_count ); 2236 if (Rcount != Rout_low) { 2237 srl( Rin_low, Rcount, Rout_low ); 2238 } 2239 2240 // The order of the next two instructions is critical in the case where 2241 // Rin and Rout are the same and should not be reversed. 2242 2243 sll( Rin_high, Ralt_count, Rxfer_bits ); // shift left by 31-count 2244 sra( Rin_high, Rcount, Rout_high ); // high half 2245 sll( Rxfer_bits, 1, Rxfer_bits ); // shift left by one more 2246 if (Rcount == Rout_low) { 2247 srl( Rin_low, Rcount, Rout_low ); 2248 } 2249 ba (false, done); 2250 delayed()-> 2251 or3( Rout_low, Rxfer_bits, Rout_low ); // new low value: or shifted old low part and xfer from high 2252 2253 // shift >= 32 bits, Ralt_count = Rcount-32 2254 bind(big_shift); 2255 2256 sra( Rin_high, Ralt_count, Rout_low ); 2257 sra( Rin_high, 31, Rout_high ); // sign into hi 2258 2259 bind( done ); 2260 } 2261 2262 2263 2264 void MacroAssembler::lushr( Register Rin_high, Register Rin_low, 2265 Register Rcount, 2266 Register Rout_high, Register Rout_low, 2267 Register Rtemp ) { 2268 2269 Register Ralt_count = Rtemp; 2270 Register Rxfer_bits = Rtemp; 2271 2272 assert( Ralt_count != Rin_high 2273 && Ralt_count != Rin_low 2274 && Ralt_count != Rcount 2275 && Rxfer_bits != Rin_low 2276 && Rxfer_bits != Rin_high 2277 && Rxfer_bits != Rcount 2278 && Rxfer_bits != Rout_high 2279 && Rout_high != Rin_low, 2280 "register alias checks"); 2281 2282 Label big_shift, done; 2283 2284 // This code can be optimized to use the 64 bit shifts in V9. 2285 // Here we use the 32 bit shifts. 2286 2287 and3( Rcount, 0x3f, Rcount); // take least significant 6 bits 2288 subcc(Rcount, 31, Ralt_count); 2289 br(greater, true, pn, big_shift); 2290 delayed()->dec(Ralt_count); 2291 2292 // shift < 32 bits, Ralt_count = Rcount-31 2293 2294 // We get the transfer bits by shifting left by 32-count the high 2295 // register. This is done by shifting left by 31-count and then by one 2296 // more to take care of the special (rare) case where count is zero 2297 // (shifting by 32 would not work). 2298 2299 neg( Ralt_count ); 2300 if (Rcount != Rout_low) { 2301 srl( Rin_low, Rcount, Rout_low ); 2302 } 2303 2304 // The order of the next two instructions is critical in the case where 2305 // Rin and Rout are the same and should not be reversed. 2306 2307 sll( Rin_high, Ralt_count, Rxfer_bits ); // shift left by 31-count 2308 srl( Rin_high, Rcount, Rout_high ); // high half 2309 sll( Rxfer_bits, 1, Rxfer_bits ); // shift left by one more 2310 if (Rcount == Rout_low) { 2311 srl( Rin_low, Rcount, Rout_low ); 2312 } 2313 ba (false, done); 2314 delayed()-> 2315 or3( Rout_low, Rxfer_bits, Rout_low ); // new low value: or shifted old low part and xfer from high 2316 2317 // shift >= 32 bits, Ralt_count = Rcount-32 2318 bind(big_shift); 2319 2320 srl( Rin_high, Ralt_count, Rout_low ); 2321 clr( Rout_high ); 2322 2323 bind( done ); 2324 } 2325 2326 #ifdef _LP64 2327 void MacroAssembler::lcmp( Register Ra, Register Rb, Register Rresult) { 2328 cmp(Ra, Rb); 2329 mov( -1, Rresult); 2330 movcc(equal, false, xcc, 0, Rresult); 2331 movcc(greater, false, xcc, 1, Rresult); 2332 } 2333 #endif 2334 2335 2336 void MacroAssembler::float_cmp( bool is_float, int unordered_result, 2337 FloatRegister Fa, FloatRegister Fb, 2338 Register Rresult) { 2339 2340 fcmp(is_float ? FloatRegisterImpl::S : FloatRegisterImpl::D, fcc0, Fa, Fb); 2341 2342 Condition lt = unordered_result == -1 ? f_unorderedOrLess : f_less; 2343 Condition eq = f_equal; 2344 Condition gt = unordered_result == 1 ? f_unorderedOrGreater : f_greater; 2345 2346 if (VM_Version::v9_instructions_work()) { 2347 2348 mov( -1, Rresult ); 2349 movcc( eq, true, fcc0, 0, Rresult ); 2350 movcc( gt, true, fcc0, 1, Rresult ); 2351 2352 } else { 2353 Label done; 2354 2355 set( -1, Rresult ); 2356 //fb(lt, true, pn, done); delayed()->set( -1, Rresult ); 2357 fb( eq, true, pn, done); delayed()->set( 0, Rresult ); 2358 fb( gt, true, pn, done); delayed()->set( 1, Rresult ); 2359 2360 bind (done); 2361 } 2362 } 2363 2364 2365 void MacroAssembler::fneg( FloatRegisterImpl::Width w, FloatRegister s, FloatRegister d) 2366 { 2367 if (VM_Version::v9_instructions_work()) { 2368 Assembler::fneg(w, s, d); 2369 } else { 2370 if (w == FloatRegisterImpl::S) { 2371 Assembler::fneg(w, s, d); 2372 } else if (w == FloatRegisterImpl::D) { 2373 // number() does a sanity check on the alignment. 2374 assert(((s->encoding(FloatRegisterImpl::D) & 1) == 0) && 2375 ((d->encoding(FloatRegisterImpl::D) & 1) == 0), "float register alignment check"); 2376 2377 Assembler::fneg(FloatRegisterImpl::S, s, d); 2378 Assembler::fmov(FloatRegisterImpl::S, s->successor(), d->successor()); 2379 } else { 2380 assert(w == FloatRegisterImpl::Q, "Invalid float register width"); 2381 2382 // number() does a sanity check on the alignment. 2383 assert(((s->encoding(FloatRegisterImpl::D) & 3) == 0) && 2384 ((d->encoding(FloatRegisterImpl::D) & 3) == 0), "float register alignment check"); 2385 2386 Assembler::fneg(FloatRegisterImpl::S, s, d); 2387 Assembler::fmov(FloatRegisterImpl::S, s->successor(), d->successor()); 2388 Assembler::fmov(FloatRegisterImpl::S, s->successor()->successor(), d->successor()->successor()); 2389 Assembler::fmov(FloatRegisterImpl::S, s->successor()->successor()->successor(), d->successor()->successor()->successor()); 2390 } 2391 } 2392 } 2393 2394 void MacroAssembler::fmov( FloatRegisterImpl::Width w, FloatRegister s, FloatRegister d) 2395 { 2396 if (VM_Version::v9_instructions_work()) { 2397 Assembler::fmov(w, s, d); 2398 } else { 2399 if (w == FloatRegisterImpl::S) { 2400 Assembler::fmov(w, s, d); 2401 } else if (w == FloatRegisterImpl::D) { 2402 // number() does a sanity check on the alignment. 2403 assert(((s->encoding(FloatRegisterImpl::D) & 1) == 0) && 2404 ((d->encoding(FloatRegisterImpl::D) & 1) == 0), "float register alignment check"); 2405 2406 Assembler::fmov(FloatRegisterImpl::S, s, d); 2407 Assembler::fmov(FloatRegisterImpl::S, s->successor(), d->successor()); 2408 } else { 2409 assert(w == FloatRegisterImpl::Q, "Invalid float register width"); 2410 2411 // number() does a sanity check on the alignment. 2412 assert(((s->encoding(FloatRegisterImpl::D) & 3) == 0) && 2413 ((d->encoding(FloatRegisterImpl::D) & 3) == 0), "float register alignment check"); 2414 2415 Assembler::fmov(FloatRegisterImpl::S, s, d); 2416 Assembler::fmov(FloatRegisterImpl::S, s->successor(), d->successor()); 2417 Assembler::fmov(FloatRegisterImpl::S, s->successor()->successor(), d->successor()->successor()); 2418 Assembler::fmov(FloatRegisterImpl::S, s->successor()->successor()->successor(), d->successor()->successor()->successor()); 2419 } 2420 } 2421 } 2422 2423 void MacroAssembler::fabs( FloatRegisterImpl::Width w, FloatRegister s, FloatRegister d) 2424 { 2425 if (VM_Version::v9_instructions_work()) { 2426 Assembler::fabs(w, s, d); 2427 } else { 2428 if (w == FloatRegisterImpl::S) { 2429 Assembler::fabs(w, s, d); 2430 } else if (w == FloatRegisterImpl::D) { 2431 // number() does a sanity check on the alignment. 2432 assert(((s->encoding(FloatRegisterImpl::D) & 1) == 0) && 2433 ((d->encoding(FloatRegisterImpl::D) & 1) == 0), "float register alignment check"); 2434 2435 Assembler::fabs(FloatRegisterImpl::S, s, d); 2436 Assembler::fmov(FloatRegisterImpl::S, s->successor(), d->successor()); 2437 } else { 2438 assert(w == FloatRegisterImpl::Q, "Invalid float register width"); 2439 2440 // number() does a sanity check on the alignment. 2441 assert(((s->encoding(FloatRegisterImpl::D) & 3) == 0) && 2442 ((d->encoding(FloatRegisterImpl::D) & 3) == 0), "float register alignment check"); 2443 2444 Assembler::fabs(FloatRegisterImpl::S, s, d); 2445 Assembler::fmov(FloatRegisterImpl::S, s->successor(), d->successor()); 2446 Assembler::fmov(FloatRegisterImpl::S, s->successor()->successor(), d->successor()->successor()); 2447 Assembler::fmov(FloatRegisterImpl::S, s->successor()->successor()->successor(), d->successor()->successor()->successor()); 2448 } 2449 } 2450 } 2451 2452 void MacroAssembler::save_all_globals_into_locals() { 2453 mov(G1,L1); 2454 mov(G2,L2); 2455 mov(G3,L3); 2456 mov(G4,L4); 2457 mov(G5,L5); 2458 mov(G6,L6); 2459 mov(G7,L7); 2460 } 2461 2462 void MacroAssembler::restore_globals_from_locals() { 2463 mov(L1,G1); 2464 mov(L2,G2); 2465 mov(L3,G3); 2466 mov(L4,G4); 2467 mov(L5,G5); 2468 mov(L6,G6); 2469 mov(L7,G7); 2470 } 2471 2472 // Use for 64 bit operation. 2473 void MacroAssembler::casx_under_lock(Register top_ptr_reg, Register top_reg, Register ptr_reg, address lock_addr, bool use_call_vm) 2474 { 2475 // store ptr_reg as the new top value 2476 #ifdef _LP64 2477 casx(top_ptr_reg, top_reg, ptr_reg); 2478 #else 2479 cas_under_lock(top_ptr_reg, top_reg, ptr_reg, lock_addr, use_call_vm); 2480 #endif // _LP64 2481 } 2482 2483 // [RGV] This routine does not handle 64 bit operations. 2484 // use casx_under_lock() or casx directly!!! 2485 void MacroAssembler::cas_under_lock(Register top_ptr_reg, Register top_reg, Register ptr_reg, address lock_addr, bool use_call_vm) 2486 { 2487 // store ptr_reg as the new top value 2488 if (VM_Version::v9_instructions_work()) { 2489 cas(top_ptr_reg, top_reg, ptr_reg); 2490 } else { 2491 2492 // If the register is not an out nor global, it is not visible 2493 // after the save. Allocate a register for it, save its 2494 // value in the register save area (the save may not flush 2495 // registers to the save area). 2496 2497 Register top_ptr_reg_after_save; 2498 Register top_reg_after_save; 2499 Register ptr_reg_after_save; 2500 2501 if (top_ptr_reg->is_out() || top_ptr_reg->is_global()) { 2502 top_ptr_reg_after_save = top_ptr_reg->after_save(); 2503 } else { 2504 Address reg_save_addr = top_ptr_reg->address_in_saved_window(); 2505 top_ptr_reg_after_save = L0; 2506 st(top_ptr_reg, reg_save_addr); 2507 } 2508 2509 if (top_reg->is_out() || top_reg->is_global()) { 2510 top_reg_after_save = top_reg->after_save(); 2511 } else { 2512 Address reg_save_addr = top_reg->address_in_saved_window(); 2513 top_reg_after_save = L1; 2514 st(top_reg, reg_save_addr); 2515 } 2516 2517 if (ptr_reg->is_out() || ptr_reg->is_global()) { 2518 ptr_reg_after_save = ptr_reg->after_save(); 2519 } else { 2520 Address reg_save_addr = ptr_reg->address_in_saved_window(); 2521 ptr_reg_after_save = L2; 2522 st(ptr_reg, reg_save_addr); 2523 } 2524 2525 const Register& lock_reg = L3; 2526 const Register& lock_ptr_reg = L4; 2527 const Register& value_reg = L5; 2528 const Register& yield_reg = L6; 2529 const Register& yieldall_reg = L7; 2530 2531 save_frame(); 2532 2533 if (top_ptr_reg_after_save == L0) { 2534 ld(top_ptr_reg->address_in_saved_window().after_save(), top_ptr_reg_after_save); 2535 } 2536 2537 if (top_reg_after_save == L1) { 2538 ld(top_reg->address_in_saved_window().after_save(), top_reg_after_save); 2539 } 2540 2541 if (ptr_reg_after_save == L2) { 2542 ld(ptr_reg->address_in_saved_window().after_save(), ptr_reg_after_save); 2543 } 2544 2545 Label(retry_get_lock); 2546 Label(not_same); 2547 Label(dont_yield); 2548 2549 assert(lock_addr, "lock_address should be non null for v8"); 2550 set((intptr_t)lock_addr, lock_ptr_reg); 2551 // Initialize yield counter 2552 mov(G0,yield_reg); 2553 mov(G0, yieldall_reg); 2554 set(StubRoutines::Sparc::locked, lock_reg); 2555 2556 bind(retry_get_lock); 2557 cmp(yield_reg, V8AtomicOperationUnderLockSpinCount); 2558 br(Assembler::less, false, Assembler::pt, dont_yield); 2559 delayed()->nop(); 2560 2561 if(use_call_vm) { 2562 Untested("Need to verify global reg consistancy"); 2563 call_VM(noreg, CAST_FROM_FN_PTR(address, SharedRuntime::yield_all), yieldall_reg); 2564 } else { 2565 // Save the regs and make space for a C call 2566 save(SP, -96, SP); 2567 save_all_globals_into_locals(); 2568 call(CAST_FROM_FN_PTR(address,os::yield_all)); 2569 delayed()->mov(yieldall_reg, O0); 2570 restore_globals_from_locals(); 2571 restore(); 2572 } 2573 2574 // reset the counter 2575 mov(G0,yield_reg); 2576 add(yieldall_reg, 1, yieldall_reg); 2577 2578 bind(dont_yield); 2579 // try to get lock 2580 swap(lock_ptr_reg, 0, lock_reg); 2581 2582 // did we get the lock? 2583 cmp(lock_reg, StubRoutines::Sparc::unlocked); 2584 br(Assembler::notEqual, true, Assembler::pn, retry_get_lock); 2585 delayed()->add(yield_reg,1,yield_reg); 2586 2587 // yes, got lock. do we have the same top? 2588 ld(top_ptr_reg_after_save, 0, value_reg); 2589 cmp(value_reg, top_reg_after_save); 2590 br(Assembler::notEqual, false, Assembler::pn, not_same); 2591 delayed()->nop(); 2592 2593 // yes, same top. 2594 st(ptr_reg_after_save, top_ptr_reg_after_save, 0); 2595 membar(Assembler::StoreStore); 2596 2597 bind(not_same); 2598 mov(value_reg, ptr_reg_after_save); 2599 st(lock_reg, lock_ptr_reg, 0); // unlock 2600 2601 restore(); 2602 } 2603 } 2604 2605 RegisterOrConstant MacroAssembler::delayed_value_impl(intptr_t* delayed_value_addr, 2606 Register tmp, 2607 int offset) { 2608 intptr_t value = *delayed_value_addr; 2609 if (value != 0) 2610 return RegisterOrConstant(value + offset); 2611 2612 // load indirectly to solve generation ordering problem 2613 AddressLiteral a(delayed_value_addr); 2614 load_ptr_contents(a, tmp); 2615 2616 #ifdef ASSERT 2617 tst(tmp); 2618 breakpoint_trap(zero, xcc); 2619 #endif 2620 2621 if (offset != 0) 2622 add(tmp, offset, tmp); 2623 2624 return RegisterOrConstant(tmp); 2625 } 2626 2627 2628 void MacroAssembler::regcon_inc_ptr( RegisterOrConstant& dest, RegisterOrConstant src, Register temp ) { 2629 assert(dest.register_or_noreg() != G0, "lost side effect"); 2630 if ((src.is_constant() && src.as_constant() == 0) || 2631 (src.is_register() && src.as_register() == G0)) { 2632 // do nothing 2633 } else if (dest.is_register()) { 2634 add(dest.as_register(), ensure_rs2(src, temp), dest.as_register()); 2635 } else if (src.is_constant()) { 2636 intptr_t res = dest.as_constant() + src.as_constant(); 2637 dest = RegisterOrConstant(res); // side effect seen by caller 2638 } else { 2639 assert(temp != noreg, "cannot handle constant += register"); 2640 add(src.as_register(), ensure_rs2(dest, temp), temp); 2641 dest = RegisterOrConstant(temp); // side effect seen by caller 2642 } 2643 } 2644 2645 void MacroAssembler::regcon_sll_ptr( RegisterOrConstant& dest, RegisterOrConstant src, Register temp ) { 2646 assert(dest.register_or_noreg() != G0, "lost side effect"); 2647 if (!is_simm13(src.constant_or_zero())) 2648 src = (src.as_constant() & 0xFF); 2649 if ((src.is_constant() && src.as_constant() == 0) || 2650 (src.is_register() && src.as_register() == G0)) { 2651 // do nothing 2652 } else if (dest.is_register()) { 2653 sll_ptr(dest.as_register(), src, dest.as_register()); 2654 } else if (src.is_constant()) { 2655 intptr_t res = dest.as_constant() << src.as_constant(); 2656 dest = RegisterOrConstant(res); // side effect seen by caller 2657 } else { 2658 assert(temp != noreg, "cannot handle constant <<= register"); 2659 set(dest.as_constant(), temp); 2660 sll_ptr(temp, src, temp); 2661 dest = RegisterOrConstant(temp); // side effect seen by caller 2662 } 2663 } 2664 2665 2666 // Look up the method for a megamorphic invokeinterface call. 2667 // The target method is determined by <intf_klass, itable_index>. 2668 // The receiver klass is in recv_klass. 2669 // On success, the result will be in method_result, and execution falls through. 2670 // On failure, execution transfers to the given label. 2671 void MacroAssembler::lookup_interface_method(Register recv_klass, 2672 Register intf_klass, 2673 RegisterOrConstant itable_index, 2674 Register method_result, 2675 Register scan_temp, 2676 Register sethi_temp, 2677 Label& L_no_such_interface) { 2678 assert_different_registers(recv_klass, intf_klass, method_result, scan_temp); 2679 assert(itable_index.is_constant() || itable_index.as_register() == method_result, 2680 "caller must use same register for non-constant itable index as for method"); 2681 2682 // Compute start of first itableOffsetEntry (which is at the end of the vtable) 2683 int vtable_base = instanceKlass::vtable_start_offset() * wordSize; 2684 int scan_step = itableOffsetEntry::size() * wordSize; 2685 int vte_size = vtableEntry::size() * wordSize; 2686 2687 lduw(recv_klass, instanceKlass::vtable_length_offset() * wordSize, scan_temp); 2688 // %%% We should store the aligned, prescaled offset in the klassoop. 2689 // Then the next several instructions would fold away. 2690 2691 int round_to_unit = ((HeapWordsPerLong > 1) ? BytesPerLong : 0); 2692 int itb_offset = vtable_base; 2693 if (round_to_unit != 0) { 2694 // hoist first instruction of round_to(scan_temp, BytesPerLong): 2695 itb_offset += round_to_unit - wordSize; 2696 } 2697 int itb_scale = exact_log2(vtableEntry::size() * wordSize); 2698 sll(scan_temp, itb_scale, scan_temp); 2699 add(scan_temp, itb_offset, scan_temp); 2700 if (round_to_unit != 0) { 2701 // Round up to align_object_offset boundary 2702 // see code for instanceKlass::start_of_itable! 2703 // Was: round_to(scan_temp, BytesPerLong); 2704 // Hoisted: add(scan_temp, BytesPerLong-1, scan_temp); 2705 and3(scan_temp, -round_to_unit, scan_temp); 2706 } 2707 add(recv_klass, scan_temp, scan_temp); 2708 2709 // Adjust recv_klass by scaled itable_index, so we can free itable_index. 2710 RegisterOrConstant itable_offset = itable_index; 2711 regcon_sll_ptr(itable_offset, exact_log2(itableMethodEntry::size() * wordSize)); 2712 regcon_inc_ptr(itable_offset, itableMethodEntry::method_offset_in_bytes()); 2713 add(recv_klass, ensure_rs2(itable_offset, sethi_temp), recv_klass); 2714 2715 // for (scan = klass->itable(); scan->interface() != NULL; scan += scan_step) { 2716 // if (scan->interface() == intf) { 2717 // result = (klass + scan->offset() + itable_index); 2718 // } 2719 // } 2720 Label search, found_method; 2721 2722 for (int peel = 1; peel >= 0; peel--) { 2723 // %%%% Could load both offset and interface in one ldx, if they were 2724 // in the opposite order. This would save a load. 2725 ld_ptr(scan_temp, itableOffsetEntry::interface_offset_in_bytes(), method_result); 2726 2727 // Check that this entry is non-null. A null entry means that 2728 // the receiver class doesn't implement the interface, and wasn't the 2729 // same as when the caller was compiled. 2730 bpr(Assembler::rc_z, false, Assembler::pn, method_result, L_no_such_interface); 2731 delayed()->cmp(method_result, intf_klass); 2732 2733 if (peel) { 2734 brx(Assembler::equal, false, Assembler::pt, found_method); 2735 } else { 2736 brx(Assembler::notEqual, false, Assembler::pn, search); 2737 // (invert the test to fall through to found_method...) 2738 } 2739 delayed()->add(scan_temp, scan_step, scan_temp); 2740 2741 if (!peel) break; 2742 2743 bind(search); 2744 } 2745 2746 bind(found_method); 2747 2748 // Got a hit. 2749 int ito_offset = itableOffsetEntry::offset_offset_in_bytes(); 2750 // scan_temp[-scan_step] points to the vtable offset we need 2751 ito_offset -= scan_step; 2752 lduw(scan_temp, ito_offset, scan_temp); 2753 ld_ptr(recv_klass, scan_temp, method_result); 2754 } 2755 2756 2757 void MacroAssembler::check_klass_subtype(Register sub_klass, 2758 Register super_klass, 2759 Register temp_reg, 2760 Register temp2_reg, 2761 Label& L_success) { 2762 Label L_failure, L_pop_to_failure; 2763 check_klass_subtype_fast_path(sub_klass, super_klass, 2764 temp_reg, temp2_reg, 2765 &L_success, &L_failure, NULL); 2766 Register sub_2 = sub_klass; 2767 Register sup_2 = super_klass; 2768 if (!sub_2->is_global()) sub_2 = L0; 2769 if (!sup_2->is_global()) sup_2 = L1; 2770 2771 save_frame_and_mov(0, sub_klass, sub_2, super_klass, sup_2); 2772 check_klass_subtype_slow_path(sub_2, sup_2, 2773 L2, L3, L4, L5, 2774 NULL, &L_pop_to_failure); 2775 2776 // on success: 2777 restore(); 2778 ba(false, L_success); 2779 delayed()->nop(); 2780 2781 // on failure: 2782 bind(L_pop_to_failure); 2783 restore(); 2784 bind(L_failure); 2785 } 2786 2787 2788 void MacroAssembler::check_klass_subtype_fast_path(Register sub_klass, 2789 Register super_klass, 2790 Register temp_reg, 2791 Register temp2_reg, 2792 Label* L_success, 2793 Label* L_failure, 2794 Label* L_slow_path, 2795 RegisterOrConstant super_check_offset, 2796 Register instanceof_hack) { 2797 int sc_offset = (klassOopDesc::header_size() * HeapWordSize + 2798 Klass::secondary_super_cache_offset_in_bytes()); 2799 int sco_offset = (klassOopDesc::header_size() * HeapWordSize + 2800 Klass::super_check_offset_offset_in_bytes()); 2801 2802 bool must_load_sco = (super_check_offset.constant_or_zero() == -1); 2803 bool need_slow_path = (must_load_sco || 2804 super_check_offset.constant_or_zero() == sco_offset); 2805 2806 assert_different_registers(sub_klass, super_klass, temp_reg); 2807 if (super_check_offset.is_register()) { 2808 assert_different_registers(sub_klass, super_klass, 2809 super_check_offset.as_register()); 2810 } else if (must_load_sco) { 2811 assert(temp2_reg != noreg, "supply either a temp or a register offset"); 2812 } 2813 2814 Label L_fallthrough; 2815 int label_nulls = 0; 2816 if (L_success == NULL) { L_success = &L_fallthrough; label_nulls++; } 2817 if (L_failure == NULL) { L_failure = &L_fallthrough; label_nulls++; } 2818 if (L_slow_path == NULL) { L_slow_path = &L_fallthrough; label_nulls++; } 2819 assert(label_nulls <= 1 || instanceof_hack != noreg || 2820 (L_slow_path == &L_fallthrough && label_nulls <= 2 && !need_slow_path), 2821 "at most one NULL in the batch, usually"); 2822 2823 // Support for the instanceof hack, which uses delay slots to 2824 // set a destination register to zero or one. 2825 bool do_bool_sets = (instanceof_hack != noreg); 2826 #define BOOL_SET(bool_value) \ 2827 if (do_bool_sets && bool_value >= 0) \ 2828 set(bool_value, instanceof_hack) 2829 #define DELAYED_BOOL_SET(bool_value) \ 2830 if (do_bool_sets && bool_value >= 0) \ 2831 delayed()->set(bool_value, instanceof_hack); \ 2832 else delayed()->nop() 2833 // Hacked ba(), which may only be used just before L_fallthrough. 2834 #define FINAL_JUMP(label, bool_value) \ 2835 if (&(label) == &L_fallthrough) { \ 2836 BOOL_SET(bool_value); \ 2837 } else { \ 2838 ba((do_bool_sets && bool_value >= 0), label); \ 2839 DELAYED_BOOL_SET(bool_value); \ 2840 } 2841 2842 // If the pointers are equal, we are done (e.g., String[] elements). 2843 // This self-check enables sharing of secondary supertype arrays among 2844 // non-primary types such as array-of-interface. Otherwise, each such 2845 // type would need its own customized SSA. 2846 // We move this check to the front of the fast path because many 2847 // type checks are in fact trivially successful in this manner, 2848 // so we get a nicely predicted branch right at the start of the check. 2849 cmp(super_klass, sub_klass); 2850 brx(Assembler::equal, do_bool_sets, Assembler::pn, *L_success); 2851 DELAYED_BOOL_SET(1); 2852 2853 // Check the supertype display: 2854 if (must_load_sco) { 2855 // The super check offset is always positive... 2856 lduw(super_klass, sco_offset, temp2_reg); 2857 super_check_offset = RegisterOrConstant(temp2_reg); 2858 } 2859 ld_ptr(sub_klass, super_check_offset, temp_reg); 2860 cmp(super_klass, temp_reg); 2861 2862 // This check has worked decisively for primary supers. 2863 // Secondary supers are sought in the super_cache ('super_cache_addr'). 2864 // (Secondary supers are interfaces and very deeply nested subtypes.) 2865 // This works in the same check above because of a tricky aliasing 2866 // between the super_cache and the primary super display elements. 2867 // (The 'super_check_addr' can address either, as the case requires.) 2868 // Note that the cache is updated below if it does not help us find 2869 // what we need immediately. 2870 // So if it was a primary super, we can just fail immediately. 2871 // Otherwise, it's the slow path for us (no success at this point). 2872 2873 if (super_check_offset.is_register()) { 2874 brx(Assembler::equal, do_bool_sets, Assembler::pn, *L_success); 2875 delayed(); if (do_bool_sets) BOOL_SET(1); 2876 // if !do_bool_sets, sneak the next cmp into the delay slot: 2877 cmp(super_check_offset.as_register(), sc_offset); 2878 2879 if (L_failure == &L_fallthrough) { 2880 brx(Assembler::equal, do_bool_sets, Assembler::pt, *L_slow_path); 2881 delayed()->nop(); 2882 BOOL_SET(0); // fallthrough on failure 2883 } else { 2884 brx(Assembler::notEqual, do_bool_sets, Assembler::pn, *L_failure); 2885 DELAYED_BOOL_SET(0); 2886 FINAL_JUMP(*L_slow_path, -1); // -1 => vanilla delay slot 2887 } 2888 } else if (super_check_offset.as_constant() == sc_offset) { 2889 // Need a slow path; fast failure is impossible. 2890 if (L_slow_path == &L_fallthrough) { 2891 brx(Assembler::equal, do_bool_sets, Assembler::pt, *L_success); 2892 DELAYED_BOOL_SET(1); 2893 } else { 2894 brx(Assembler::notEqual, false, Assembler::pn, *L_slow_path); 2895 delayed()->nop(); 2896 FINAL_JUMP(*L_success, 1); 2897 } 2898 } else { 2899 // No slow path; it's a fast decision. 2900 if (L_failure == &L_fallthrough) { 2901 brx(Assembler::equal, do_bool_sets, Assembler::pt, *L_success); 2902 DELAYED_BOOL_SET(1); 2903 BOOL_SET(0); 2904 } else { 2905 brx(Assembler::notEqual, do_bool_sets, Assembler::pn, *L_failure); 2906 DELAYED_BOOL_SET(0); 2907 FINAL_JUMP(*L_success, 1); 2908 } 2909 } 2910 2911 bind(L_fallthrough); 2912 2913 #undef final_jump 2914 #undef bool_set 2915 #undef DELAYED_BOOL_SET 2916 #undef final_jump 2917 } 2918 2919 2920 void MacroAssembler::check_klass_subtype_slow_path(Register sub_klass, 2921 Register super_klass, 2922 Register count_temp, 2923 Register scan_temp, 2924 Register scratch_reg, 2925 Register coop_reg, 2926 Label* L_success, 2927 Label* L_failure) { 2928 assert_different_registers(sub_klass, super_klass, 2929 count_temp, scan_temp, scratch_reg, coop_reg); 2930 2931 Label L_fallthrough, L_loop; 2932 int label_nulls = 0; 2933 if (L_success == NULL) { L_success = &L_fallthrough; label_nulls++; } 2934 if (L_failure == NULL) { L_failure = &L_fallthrough; label_nulls++; } 2935 assert(label_nulls <= 1, "at most one NULL in the batch"); 2936 2937 // a couple of useful fields in sub_klass: 2938 int ss_offset = (klassOopDesc::header_size() * HeapWordSize + 2939 Klass::secondary_supers_offset_in_bytes()); 2940 int sc_offset = (klassOopDesc::header_size() * HeapWordSize + 2941 Klass::secondary_super_cache_offset_in_bytes()); 2942 2943 // Do a linear scan of the secondary super-klass chain. 2944 // This code is rarely used, so simplicity is a virtue here. 2945 2946 #ifndef PRODUCT 2947 int* pst_counter = &SharedRuntime::_partial_subtype_ctr; 2948 inc_counter((address) pst_counter, count_temp, scan_temp); 2949 #endif 2950 2951 // We will consult the secondary-super array. 2952 ld_ptr(sub_klass, ss_offset, scan_temp); 2953 2954 // Compress superclass if necessary. 2955 Register search_key = super_klass; 2956 bool decode_super_klass = false; 2957 if (UseCompressedOops) { 2958 if (coop_reg != noreg) { 2959 encode_heap_oop_not_null(super_klass, coop_reg); 2960 search_key = coop_reg; 2961 } else { 2962 encode_heap_oop_not_null(super_klass); 2963 decode_super_klass = true; // scarce temps! 2964 } 2965 // The superclass is never null; it would be a basic system error if a null 2966 // pointer were to sneak in here. Note that we have already loaded the 2967 // Klass::super_check_offset from the super_klass in the fast path, 2968 // so if there is a null in that register, we are already in the afterlife. 2969 } 2970 2971 // Load the array length. (Positive movl does right thing on LP64.) 2972 lduw(scan_temp, arrayOopDesc::length_offset_in_bytes(), count_temp); 2973 2974 // Check for empty secondary super list 2975 tst(count_temp); 2976 2977 // Top of search loop 2978 bind(L_loop); 2979 br(Assembler::equal, false, Assembler::pn, *L_failure); 2980 delayed()->add(scan_temp, heapOopSize, scan_temp); 2981 assert(heapOopSize != 0, "heapOopSize should be initialized"); 2982 2983 // Skip the array header in all array accesses. 2984 int elem_offset = arrayOopDesc::base_offset_in_bytes(T_OBJECT); 2985 elem_offset -= heapOopSize; // the scan pointer was pre-incremented also 2986 2987 // Load next super to check 2988 if (UseCompressedOops) { 2989 // Don't use load_heap_oop; we don't want to decode the element. 2990 lduw( scan_temp, elem_offset, scratch_reg ); 2991 } else { 2992 ld_ptr( scan_temp, elem_offset, scratch_reg ); 2993 } 2994 2995 // Look for Rsuper_klass on Rsub_klass's secondary super-class-overflow list 2996 cmp(scratch_reg, search_key); 2997 2998 // A miss means we are NOT a subtype and need to keep looping 2999 brx(Assembler::notEqual, false, Assembler::pn, L_loop); 3000 delayed()->deccc(count_temp); // decrement trip counter in delay slot 3001 3002 // Falling out the bottom means we found a hit; we ARE a subtype 3003 if (decode_super_klass) decode_heap_oop(super_klass); 3004 3005 // Success. Cache the super we found and proceed in triumph. 3006 st_ptr(super_klass, sub_klass, sc_offset); 3007 3008 if (L_success != &L_fallthrough) { 3009 ba(false, *L_success); 3010 delayed()->nop(); 3011 } 3012 3013 bind(L_fallthrough); 3014 } 3015 3016 3017 3018 3019 void MacroAssembler::check_method_handle_type(Register mtype_reg, Register mh_reg, 3020 Register temp_reg, 3021 Label& wrong_method_type) { 3022 assert_different_registers(mtype_reg, mh_reg, temp_reg); 3023 // compare method type against that of the receiver 3024 RegisterOrConstant mhtype_offset = delayed_value(java_dyn_MethodHandle::type_offset_in_bytes, temp_reg); 3025 ld_ptr(mh_reg, mhtype_offset, temp_reg); 3026 cmp(temp_reg, mtype_reg); 3027 br(Assembler::notEqual, false, Assembler::pn, wrong_method_type); 3028 delayed()->nop(); 3029 } 3030 3031 3032 void MacroAssembler::jump_to_method_handle_entry(Register mh_reg, Register temp_reg) { 3033 assert(mh_reg == G3_method_handle, "caller must put MH object in G3"); 3034 assert_different_registers(mh_reg, temp_reg); 3035 3036 // pick out the interpreted side of the handler 3037 ld_ptr(mh_reg, delayed_value(java_dyn_MethodHandle::vmentry_offset_in_bytes, temp_reg), temp_reg); 3038 3039 // off we go... 3040 ld_ptr(temp_reg, MethodHandleEntry::from_interpreted_entry_offset_in_bytes(), temp_reg); 3041 jmp(temp_reg, 0); 3042 3043 // for the various stubs which take control at this point, 3044 // see MethodHandles::generate_method_handle_stub 3045 3046 // (Can any caller use this delay slot? If so, add an option for supression.) 3047 delayed()->nop(); 3048 } 3049 3050 RegisterOrConstant MacroAssembler::argument_offset(RegisterOrConstant arg_slot, 3051 int extra_slot_offset) { 3052 // cf. TemplateTable::prepare_invoke(), if (load_receiver). 3053 int stackElementSize = Interpreter::stackElementWords() * wordSize; 3054 int offset = Interpreter::expr_offset_in_bytes(extra_slot_offset+0); 3055 int offset1 = Interpreter::expr_offset_in_bytes(extra_slot_offset+1); 3056 assert(offset1 - offset == stackElementSize, "correct arithmetic"); 3057 if (arg_slot.is_constant()) { 3058 offset += arg_slot.as_constant() * stackElementSize; 3059 return offset; 3060 } else { 3061 Register temp = arg_slot.as_register(); 3062 sll_ptr(temp, exact_log2(stackElementSize), temp); 3063 if (offset != 0) 3064 add(temp, offset, temp); 3065 return temp; 3066 } 3067 } 3068 3069 3070 3071 void MacroAssembler::biased_locking_enter(Register obj_reg, Register mark_reg, 3072 Register temp_reg, 3073 Label& done, Label* slow_case, 3074 BiasedLockingCounters* counters) { 3075 assert(UseBiasedLocking, "why call this otherwise?"); 3076 3077 if (PrintBiasedLockingStatistics) { 3078 assert_different_registers(obj_reg, mark_reg, temp_reg, O7); 3079 if (counters == NULL) 3080 counters = BiasedLocking::counters(); 3081 } 3082 3083 Label cas_label; 3084 3085 // Biased locking 3086 // See whether the lock is currently biased toward our thread and 3087 // whether the epoch is still valid 3088 // Note that the runtime guarantees sufficient alignment of JavaThread 3089 // pointers to allow age to be placed into low bits 3090 assert(markOopDesc::age_shift == markOopDesc::lock_bits + markOopDesc::biased_lock_bits, "biased locking makes assumptions about bit layout"); 3091 and3(mark_reg, markOopDesc::biased_lock_mask_in_place, temp_reg); 3092 cmp(temp_reg, markOopDesc::biased_lock_pattern); 3093 brx(Assembler::notEqual, false, Assembler::pn, cas_label); 3094 delayed()->nop(); 3095 3096 load_klass(obj_reg, temp_reg); 3097 ld_ptr(Address(temp_reg, Klass::prototype_header_offset_in_bytes() + klassOopDesc::klass_part_offset_in_bytes()), temp_reg); 3098 or3(G2_thread, temp_reg, temp_reg); 3099 xor3(mark_reg, temp_reg, temp_reg); 3100 andcc(temp_reg, ~((int) markOopDesc::age_mask_in_place), temp_reg); 3101 if (counters != NULL) { 3102 cond_inc(Assembler::equal, (address) counters->biased_lock_entry_count_addr(), mark_reg, temp_reg); 3103 // Reload mark_reg as we may need it later 3104 ld_ptr(Address(obj_reg, oopDesc::mark_offset_in_bytes()), mark_reg); 3105 } 3106 brx(Assembler::equal, true, Assembler::pt, done); 3107 delayed()->nop(); 3108 3109 Label try_revoke_bias; 3110 Label try_rebias; 3111 Address mark_addr = Address(obj_reg, oopDesc::mark_offset_in_bytes()); 3112 assert(mark_addr.disp() == 0, "cas must take a zero displacement"); 3113 3114 // At this point we know that the header has the bias pattern and 3115 // that we are not the bias owner in the current epoch. We need to 3116 // figure out more details about the state of the header in order to 3117 // know what operations can be legally performed on the object's 3118 // header. 3119 3120 // If the low three bits in the xor result aren't clear, that means 3121 // the prototype header is no longer biased and we have to revoke 3122 // the bias on this object. 3123 btst(markOopDesc::biased_lock_mask_in_place, temp_reg); 3124 brx(Assembler::notZero, false, Assembler::pn, try_revoke_bias); 3125 3126 // Biasing is still enabled for this data type. See whether the 3127 // epoch of the current bias is still valid, meaning that the epoch 3128 // bits of the mark word are equal to the epoch bits of the 3129 // prototype header. (Note that the prototype header's epoch bits 3130 // only change at a safepoint.) If not, attempt to rebias the object 3131 // toward the current thread. Note that we must be absolutely sure 3132 // that the current epoch is invalid in order to do this because 3133 // otherwise the manipulations it performs on the mark word are 3134 // illegal. 3135 delayed()->btst(markOopDesc::epoch_mask_in_place, temp_reg); 3136 brx(Assembler::notZero, false, Assembler::pn, try_rebias); 3137 3138 // The epoch of the current bias is still valid but we know nothing 3139 // about the owner; it might be set or it might be clear. Try to 3140 // acquire the bias of the object using an atomic operation. If this 3141 // fails we will go in to the runtime to revoke the object's bias. 3142 // Note that we first construct the presumed unbiased header so we 3143 // don't accidentally blow away another thread's valid bias. 3144 delayed()->and3(mark_reg, 3145 markOopDesc::biased_lock_mask_in_place | markOopDesc::age_mask_in_place | markOopDesc::epoch_mask_in_place, 3146 mark_reg); 3147 or3(G2_thread, mark_reg, temp_reg); 3148 casn(mark_addr.base(), mark_reg, temp_reg); 3149 // If the biasing toward our thread failed, this means that 3150 // another thread succeeded in biasing it toward itself and we 3151 // need to revoke that bias. The revocation will occur in the 3152 // interpreter runtime in the slow case. 3153 cmp(mark_reg, temp_reg); 3154 if (counters != NULL) { 3155 cond_inc(Assembler::zero, (address) counters->anonymously_biased_lock_entry_count_addr(), mark_reg, temp_reg); 3156 } 3157 if (slow_case != NULL) { 3158 brx(Assembler::notEqual, true, Assembler::pn, *slow_case); 3159 delayed()->nop(); 3160 } 3161 br(Assembler::always, false, Assembler::pt, done); 3162 delayed()->nop(); 3163 3164 bind(try_rebias); 3165 // At this point we know the epoch has expired, meaning that the 3166 // current "bias owner", if any, is actually invalid. Under these 3167 // circumstances _only_, we are allowed to use the current header's 3168 // value as the comparison value when doing the cas to acquire the 3169 // bias in the current epoch. In other words, we allow transfer of 3170 // the bias from one thread to another directly in this situation. 3171 // 3172 // FIXME: due to a lack of registers we currently blow away the age 3173 // bits in this situation. Should attempt to preserve them. 3174 load_klass(obj_reg, temp_reg); 3175 ld_ptr(Address(temp_reg, Klass::prototype_header_offset_in_bytes() + klassOopDesc::klass_part_offset_in_bytes()), temp_reg); 3176 or3(G2_thread, temp_reg, temp_reg); 3177 casn(mark_addr.base(), mark_reg, temp_reg); 3178 // If the biasing toward our thread failed, this means that 3179 // another thread succeeded in biasing it toward itself and we 3180 // need to revoke that bias. The revocation will occur in the 3181 // interpreter runtime in the slow case. 3182 cmp(mark_reg, temp_reg); 3183 if (counters != NULL) { 3184 cond_inc(Assembler::zero, (address) counters->rebiased_lock_entry_count_addr(), mark_reg, temp_reg); 3185 } 3186 if (slow_case != NULL) { 3187 brx(Assembler::notEqual, true, Assembler::pn, *slow_case); 3188 delayed()->nop(); 3189 } 3190 br(Assembler::always, false, Assembler::pt, done); 3191 delayed()->nop(); 3192 3193 bind(try_revoke_bias); 3194 // The prototype mark in the klass doesn't have the bias bit set any 3195 // more, indicating that objects of this data type are not supposed 3196 // to be biased any more. We are going to try to reset the mark of 3197 // this object to the prototype value and fall through to the 3198 // CAS-based locking scheme. Note that if our CAS fails, it means 3199 // that another thread raced us for the privilege of revoking the 3200 // bias of this particular object, so it's okay to continue in the 3201 // normal locking code. 3202 // 3203 // FIXME: due to a lack of registers we currently blow away the age 3204 // bits in this situation. Should attempt to preserve them. 3205 load_klass(obj_reg, temp_reg); 3206 ld_ptr(Address(temp_reg, Klass::prototype_header_offset_in_bytes() + klassOopDesc::klass_part_offset_in_bytes()), temp_reg); 3207 casn(mark_addr.base(), mark_reg, temp_reg); 3208 // Fall through to the normal CAS-based lock, because no matter what 3209 // the result of the above CAS, some thread must have succeeded in 3210 // removing the bias bit from the object's header. 3211 if (counters != NULL) { 3212 cmp(mark_reg, temp_reg); 3213 cond_inc(Assembler::zero, (address) counters->revoked_lock_entry_count_addr(), mark_reg, temp_reg); 3214 } 3215 3216 bind(cas_label); 3217 } 3218 3219 void MacroAssembler::biased_locking_exit (Address mark_addr, Register temp_reg, Label& done, 3220 bool allow_delay_slot_filling) { 3221 // Check for biased locking unlock case, which is a no-op 3222 // Note: we do not have to check the thread ID for two reasons. 3223 // First, the interpreter checks for IllegalMonitorStateException at 3224 // a higher level. Second, if the bias was revoked while we held the 3225 // lock, the object could not be rebiased toward another thread, so 3226 // the bias bit would be clear. 3227 ld_ptr(mark_addr, temp_reg); 3228 and3(temp_reg, markOopDesc::biased_lock_mask_in_place, temp_reg); 3229 cmp(temp_reg, markOopDesc::biased_lock_pattern); 3230 brx(Assembler::equal, allow_delay_slot_filling, Assembler::pt, done); 3231 delayed(); 3232 if (!allow_delay_slot_filling) { 3233 nop(); 3234 } 3235 } 3236 3237 3238 // CASN -- 32-64 bit switch hitter similar to the synthetic CASN provided by 3239 // Solaris/SPARC's "as". Another apt name would be cas_ptr() 3240 3241 void MacroAssembler::casn (Register addr_reg, Register cmp_reg, Register set_reg ) { 3242 casx_under_lock (addr_reg, cmp_reg, set_reg, (address)StubRoutines::Sparc::atomic_memory_operation_lock_addr()) ; 3243 } 3244 3245 3246 3247 // compiler_lock_object() and compiler_unlock_object() are direct transliterations 3248 // of i486.ad fast_lock() and fast_unlock(). See those methods for detailed comments. 3249 // The code could be tightened up considerably. 3250 // 3251 // box->dhw disposition - post-conditions at DONE_LABEL. 3252 // - Successful inflated lock: box->dhw != 0. 3253 // Any non-zero value suffices. 3254 // Consider G2_thread, rsp, boxReg, or unused_mark() 3255 // - Successful Stack-lock: box->dhw == mark. 3256 // box->dhw must contain the displaced mark word value 3257 // - Failure -- icc.ZFlag == 0 and box->dhw is undefined. 3258 // The slow-path fast_enter() and slow_enter() operators 3259 // are responsible for setting box->dhw = NonZero (typically ::unused_mark). 3260 // - Biased: box->dhw is undefined 3261 // 3262 // SPARC refworkload performance - specifically jetstream and scimark - are 3263 // extremely sensitive to the size of the code emitted by compiler_lock_object 3264 // and compiler_unlock_object. Critically, the key factor is code size, not path 3265 // length. (Simply experiments to pad CLO with unexecuted NOPs demonstrte the 3266 // effect). 3267 3268 3269 void MacroAssembler::compiler_lock_object(Register Roop, Register Rmark, 3270 Register Rbox, Register Rscratch, 3271 BiasedLockingCounters* counters, 3272 bool try_bias) { 3273 Address mark_addr(Roop, oopDesc::mark_offset_in_bytes()); 3274 3275 verify_oop(Roop); 3276 Label done ; 3277 3278 if (counters != NULL) { 3279 inc_counter((address) counters->total_entry_count_addr(), Rmark, Rscratch); 3280 } 3281 3282 if (EmitSync & 1) { 3283 mov (3, Rscratch) ; 3284 st_ptr (Rscratch, Rbox, BasicLock::displaced_header_offset_in_bytes()); 3285 cmp (SP, G0) ; 3286 return ; 3287 } 3288 3289 if (EmitSync & 2) { 3290 3291 // Fetch object's markword 3292 ld_ptr(mark_addr, Rmark); 3293 3294 if (try_bias) { 3295 biased_locking_enter(Roop, Rmark, Rscratch, done, NULL, counters); 3296 } 3297 3298 // Save Rbox in Rscratch to be used for the cas operation 3299 mov(Rbox, Rscratch); 3300 3301 // set Rmark to markOop | markOopDesc::unlocked_value 3302 or3(Rmark, markOopDesc::unlocked_value, Rmark); 3303 3304 // Initialize the box. (Must happen before we update the object mark!) 3305 st_ptr(Rmark, Rbox, BasicLock::displaced_header_offset_in_bytes()); 3306 3307 // compare object markOop with Rmark and if equal exchange Rscratch with object markOop 3308 assert(mark_addr.disp() == 0, "cas must take a zero displacement"); 3309 casx_under_lock(mark_addr.base(), Rmark, Rscratch, 3310 (address)StubRoutines::Sparc::atomic_memory_operation_lock_addr()); 3311 3312 // if compare/exchange succeeded we found an unlocked object and we now have locked it 3313 // hence we are done 3314 cmp(Rmark, Rscratch); 3315 #ifdef _LP64 3316 sub(Rscratch, STACK_BIAS, Rscratch); 3317 #endif 3318 brx(Assembler::equal, false, Assembler::pt, done); 3319 delayed()->sub(Rscratch, SP, Rscratch); //pull next instruction into delay slot 3320 3321 // we did not find an unlocked object so see if this is a recursive case 3322 // sub(Rscratch, SP, Rscratch); 3323 assert(os::vm_page_size() > 0xfff, "page size too small - change the constant"); 3324 andcc(Rscratch, 0xfffff003, Rscratch); 3325 st_ptr(Rscratch, Rbox, BasicLock::displaced_header_offset_in_bytes()); 3326 bind (done) ; 3327 return ; 3328 } 3329 3330 Label Egress ; 3331 3332 if (EmitSync & 256) { 3333 Label IsInflated ; 3334 3335 ld_ptr (mark_addr, Rmark); // fetch obj->mark 3336 // Triage: biased, stack-locked, neutral, inflated 3337 if (try_bias) { 3338 biased_locking_enter(Roop, Rmark, Rscratch, done, NULL, counters); 3339 // Invariant: if control reaches this point in the emitted stream 3340 // then Rmark has not been modified. 3341 } 3342 3343 // Store mark into displaced mark field in the on-stack basic-lock "box" 3344 // Critically, this must happen before the CAS 3345 // Maximize the ST-CAS distance to minimize the ST-before-CAS penalty. 3346 st_ptr (Rmark, Rbox, BasicLock::displaced_header_offset_in_bytes()); 3347 andcc (Rmark, 2, G0) ; 3348 brx (Assembler::notZero, false, Assembler::pn, IsInflated) ; 3349 delayed() -> 3350 3351 // Try stack-lock acquisition. 3352 // Beware: the 1st instruction is in a delay slot 3353 mov (Rbox, Rscratch); 3354 or3 (Rmark, markOopDesc::unlocked_value, Rmark); 3355 assert (mark_addr.disp() == 0, "cas must take a zero displacement"); 3356 casn (mark_addr.base(), Rmark, Rscratch) ; 3357 cmp (Rmark, Rscratch); 3358 brx (Assembler::equal, false, Assembler::pt, done); 3359 delayed()->sub(Rscratch, SP, Rscratch); 3360 3361 // Stack-lock attempt failed - check for recursive stack-lock. 3362 // See the comments below about how we might remove this case. 3363 #ifdef _LP64 3364 sub (Rscratch, STACK_BIAS, Rscratch); 3365 #endif 3366 assert(os::vm_page_size() > 0xfff, "page size too small - change the constant"); 3367 andcc (Rscratch, 0xfffff003, Rscratch); 3368 br (Assembler::always, false, Assembler::pt, done) ; 3369 delayed()-> st_ptr (Rscratch, Rbox, BasicLock::displaced_header_offset_in_bytes()); 3370 3371 bind (IsInflated) ; 3372 if (EmitSync & 64) { 3373 // If m->owner != null goto IsLocked 3374 // Pessimistic form: Test-and-CAS vs CAS 3375 // The optimistic form avoids RTS->RTO cache line upgrades. 3376 ld_ptr (Rmark, ObjectMonitor::owner_offset_in_bytes() - 2, Rscratch); 3377 andcc (Rscratch, Rscratch, G0) ; 3378 brx (Assembler::notZero, false, Assembler::pn, done) ; 3379 delayed()->nop() ; 3380 // m->owner == null : it's unlocked. 3381 } 3382 3383 // Try to CAS m->owner from null to Self 3384 // Invariant: if we acquire the lock then _recursions should be 0. 3385 add (Rmark, ObjectMonitor::owner_offset_in_bytes()-2, Rmark) ; 3386 mov (G2_thread, Rscratch) ; 3387 casn (Rmark, G0, Rscratch) ; 3388 cmp (Rscratch, G0) ; 3389 // Intentional fall-through into done 3390 } else { 3391 // Aggressively avoid the Store-before-CAS penalty 3392 // Defer the store into box->dhw until after the CAS 3393 Label IsInflated, Recursive ; 3394 3395 // Anticipate CAS -- Avoid RTS->RTO upgrade 3396 // prefetch (mark_addr, Assembler::severalWritesAndPossiblyReads) ; 3397 3398 ld_ptr (mark_addr, Rmark); // fetch obj->mark 3399 // Triage: biased, stack-locked, neutral, inflated 3400 3401 if (try_bias) { 3402 biased_locking_enter(Roop, Rmark, Rscratch, done, NULL, counters); 3403 // Invariant: if control reaches this point in the emitted stream 3404 // then Rmark has not been modified. 3405 } 3406 andcc (Rmark, 2, G0) ; 3407 brx (Assembler::notZero, false, Assembler::pn, IsInflated) ; 3408 delayed()-> // Beware - dangling delay-slot 3409 3410 // Try stack-lock acquisition. 3411 // Transiently install BUSY (0) encoding in the mark word. 3412 // if the CAS of 0 into the mark was successful then we execute: 3413 // ST box->dhw = mark -- save fetched mark in on-stack basiclock box 3414 // ST obj->mark = box -- overwrite transient 0 value 3415 // This presumes TSO, of course. 3416 3417 mov (0, Rscratch) ; 3418 or3 (Rmark, markOopDesc::unlocked_value, Rmark); 3419 assert (mark_addr.disp() == 0, "cas must take a zero displacement"); 3420 casn (mark_addr.base(), Rmark, Rscratch) ; 3421 // prefetch (mark_addr, Assembler::severalWritesAndPossiblyReads) ; 3422 cmp (Rscratch, Rmark) ; 3423 brx (Assembler::notZero, false, Assembler::pn, Recursive) ; 3424 delayed() -> 3425 st_ptr (Rmark, Rbox, BasicLock::displaced_header_offset_in_bytes()); 3426 if (counters != NULL) { 3427 cond_inc(Assembler::equal, (address) counters->fast_path_entry_count_addr(), Rmark, Rscratch); 3428 } 3429 br (Assembler::always, false, Assembler::pt, done); 3430 delayed() -> 3431 st_ptr (Rbox, mark_addr) ; 3432 3433 bind (Recursive) ; 3434 // Stack-lock attempt failed - check for recursive stack-lock. 3435 // Tests show that we can remove the recursive case with no impact 3436 // on refworkload 0.83. If we need to reduce the size of the code 3437 // emitted by compiler_lock_object() the recursive case is perfect 3438 // candidate. 3439 // 3440 // A more extreme idea is to always inflate on stack-lock recursion. 3441 // This lets us eliminate the recursive checks in compiler_lock_object 3442 // and compiler_unlock_object and the (box->dhw == 0) encoding. 3443 // A brief experiment - requiring changes to synchronizer.cpp, interpreter, 3444 // and showed a performance *increase*. In the same experiment I eliminated 3445 // the fast-path stack-lock code from the interpreter and always passed 3446 // control to the "slow" operators in synchronizer.cpp. 3447 3448 // RScratch contains the fetched obj->mark value from the failed CASN. 3449 #ifdef _LP64 3450 sub (Rscratch, STACK_BIAS, Rscratch); 3451 #endif 3452 sub(Rscratch, SP, Rscratch); 3453 assert(os::vm_page_size() > 0xfff, "page size too small - change the constant"); 3454 andcc (Rscratch, 0xfffff003, Rscratch); 3455 if (counters != NULL) { 3456 // Accounting needs the Rscratch register 3457 st_ptr (Rscratch, Rbox, BasicLock::displaced_header_offset_in_bytes()); 3458 cond_inc(Assembler::equal, (address) counters->fast_path_entry_count_addr(), Rmark, Rscratch); 3459 br (Assembler::always, false, Assembler::pt, done) ; 3460 delayed()->nop() ; 3461 } else { 3462 br (Assembler::always, false, Assembler::pt, done) ; 3463 delayed()-> st_ptr (Rscratch, Rbox, BasicLock::displaced_header_offset_in_bytes()); 3464 } 3465 3466 bind (IsInflated) ; 3467 if (EmitSync & 64) { 3468 // If m->owner != null goto IsLocked 3469 // Test-and-CAS vs CAS 3470 // Pessimistic form avoids futile (doomed) CAS attempts 3471 // The optimistic form avoids RTS->RTO cache line upgrades. 3472 ld_ptr (Rmark, ObjectMonitor::owner_offset_in_bytes() - 2, Rscratch); 3473 andcc (Rscratch, Rscratch, G0) ; 3474 brx (Assembler::notZero, false, Assembler::pn, done) ; 3475 delayed()->nop() ; 3476 // m->owner == null : it's unlocked. 3477 } 3478 3479 // Try to CAS m->owner from null to Self 3480 // Invariant: if we acquire the lock then _recursions should be 0. 3481 add (Rmark, ObjectMonitor::owner_offset_in_bytes()-2, Rmark) ; 3482 mov (G2_thread, Rscratch) ; 3483 casn (Rmark, G0, Rscratch) ; 3484 cmp (Rscratch, G0) ; 3485 // ST box->displaced_header = NonZero. 3486 // Any non-zero value suffices: 3487 // unused_mark(), G2_thread, RBox, RScratch, rsp, etc. 3488 st_ptr (Rbox, Rbox, BasicLock::displaced_header_offset_in_bytes()); 3489 // Intentional fall-through into done 3490 } 3491 3492 bind (done) ; 3493 } 3494 3495 void MacroAssembler::compiler_unlock_object(Register Roop, Register Rmark, 3496 Register Rbox, Register Rscratch, 3497 bool try_bias) { 3498 Address mark_addr(Roop, oopDesc::mark_offset_in_bytes()); 3499 3500 Label done ; 3501 3502 if (EmitSync & 4) { 3503 cmp (SP, G0) ; 3504 return ; 3505 } 3506 3507 if (EmitSync & 8) { 3508 if (try_bias) { 3509 biased_locking_exit(mark_addr, Rscratch, done); 3510 } 3511 3512 // Test first if it is a fast recursive unlock 3513 ld_ptr(Rbox, BasicLock::displaced_header_offset_in_bytes(), Rmark); 3514 cmp(Rmark, G0); 3515 brx(Assembler::equal, false, Assembler::pt, done); 3516 delayed()->nop(); 3517 3518 // Check if it is still a light weight lock, this is is true if we see 3519 // the stack address of the basicLock in the markOop of the object 3520 assert(mark_addr.disp() == 0, "cas must take a zero displacement"); 3521 casx_under_lock(mark_addr.base(), Rbox, Rmark, 3522 (address)StubRoutines::Sparc::atomic_memory_operation_lock_addr()); 3523 br (Assembler::always, false, Assembler::pt, done); 3524 delayed()->cmp(Rbox, Rmark); 3525 bind (done) ; 3526 return ; 3527 } 3528 3529 // Beware ... If the aggregate size of the code emitted by CLO and CUO is 3530 // is too large performance rolls abruptly off a cliff. 3531 // This could be related to inlining policies, code cache management, or 3532 // I$ effects. 3533 Label LStacked ; 3534 3535 if (try_bias) { 3536 // TODO: eliminate redundant LDs of obj->mark 3537 biased_locking_exit(mark_addr, Rscratch, done); 3538 } 3539 3540 ld_ptr (Roop, oopDesc::mark_offset_in_bytes(), Rmark) ; 3541 ld_ptr (Rbox, BasicLock::displaced_header_offset_in_bytes(), Rscratch); 3542 andcc (Rscratch, Rscratch, G0); 3543 brx (Assembler::zero, false, Assembler::pn, done); 3544 delayed()-> nop() ; // consider: relocate fetch of mark, above, into this DS 3545 andcc (Rmark, 2, G0) ; 3546 brx (Assembler::zero, false, Assembler::pt, LStacked) ; 3547 delayed()-> nop() ; 3548 3549 // It's inflated 3550 // Conceptually we need a #loadstore|#storestore "release" MEMBAR before 3551 // the ST of 0 into _owner which releases the lock. This prevents loads 3552 // and stores within the critical section from reordering (floating) 3553 // past the store that releases the lock. But TSO is a strong memory model 3554 // and that particular flavor of barrier is a noop, so we can safely elide it. 3555 // Note that we use 1-0 locking by default for the inflated case. We 3556 // close the resultant (and rare) race by having contented threads in 3557 // monitorenter periodically poll _owner. 3558 ld_ptr (Rmark, ObjectMonitor::owner_offset_in_bytes() - 2, Rscratch); 3559 ld_ptr (Rmark, ObjectMonitor::recursions_offset_in_bytes() - 2, Rbox); 3560 xor3 (Rscratch, G2_thread, Rscratch) ; 3561 orcc (Rbox, Rscratch, Rbox) ; 3562 brx (Assembler::notZero, false, Assembler::pn, done) ; 3563 delayed()-> 3564 ld_ptr (Rmark, ObjectMonitor::EntryList_offset_in_bytes() - 2, Rscratch); 3565 ld_ptr (Rmark, ObjectMonitor::cxq_offset_in_bytes() - 2, Rbox); 3566 orcc (Rbox, Rscratch, G0) ; 3567 if (EmitSync & 65536) { 3568 Label LSucc ; 3569 brx (Assembler::notZero, false, Assembler::pn, LSucc) ; 3570 delayed()->nop() ; 3571 br (Assembler::always, false, Assembler::pt, done) ; 3572 delayed()-> 3573 st_ptr (G0, Rmark, ObjectMonitor::owner_offset_in_bytes() - 2); 3574 3575 bind (LSucc) ; 3576 st_ptr (G0, Rmark, ObjectMonitor::owner_offset_in_bytes() - 2); 3577 if (os::is_MP()) { membar (StoreLoad) ; } 3578 ld_ptr (Rmark, ObjectMonitor::succ_offset_in_bytes() - 2, Rscratch); 3579 andcc (Rscratch, Rscratch, G0) ; 3580 brx (Assembler::notZero, false, Assembler::pt, done) ; 3581 delayed()-> andcc (G0, G0, G0) ; 3582 add (Rmark, ObjectMonitor::owner_offset_in_bytes()-2, Rmark) ; 3583 mov (G2_thread, Rscratch) ; 3584 casn (Rmark, G0, Rscratch) ; 3585 cmp (Rscratch, G0) ; 3586 // invert icc.zf and goto done 3587 brx (Assembler::notZero, false, Assembler::pt, done) ; 3588 delayed() -> cmp (G0, G0) ; 3589 br (Assembler::always, false, Assembler::pt, done); 3590 delayed() -> cmp (G0, 1) ; 3591 } else { 3592 brx (Assembler::notZero, false, Assembler::pn, done) ; 3593 delayed()->nop() ; 3594 br (Assembler::always, false, Assembler::pt, done) ; 3595 delayed()-> 3596 st_ptr (G0, Rmark, ObjectMonitor::owner_offset_in_bytes() - 2); 3597 } 3598 3599 bind (LStacked) ; 3600 // Consider: we could replace the expensive CAS in the exit 3601 // path with a simple ST of the displaced mark value fetched from 3602 // the on-stack basiclock box. That admits a race where a thread T2 3603 // in the slow lock path -- inflating with monitor M -- could race a 3604 // thread T1 in the fast unlock path, resulting in a missed wakeup for T2. 3605 // More precisely T1 in the stack-lock unlock path could "stomp" the 3606 // inflated mark value M installed by T2, resulting in an orphan 3607 // object monitor M and T2 becoming stranded. We can remedy that situation 3608 // by having T2 periodically poll the object's mark word using timed wait 3609 // operations. If T2 discovers that a stomp has occurred it vacates 3610 // the monitor M and wakes any other threads stranded on the now-orphan M. 3611 // In addition the monitor scavenger, which performs deflation, 3612 // would also need to check for orpan monitors and stranded threads. 3613 // 3614 // Finally, inflation is also used when T2 needs to assign a hashCode 3615 // to O and O is stack-locked by T1. The "stomp" race could cause 3616 // an assigned hashCode value to be lost. We can avoid that condition 3617 // and provide the necessary hashCode stability invariants by ensuring 3618 // that hashCode generation is idempotent between copying GCs. 3619 // For example we could compute the hashCode of an object O as 3620 // O's heap address XOR some high quality RNG value that is refreshed 3621 // at GC-time. The monitor scavenger would install the hashCode 3622 // found in any orphan monitors. Again, the mechanism admits a 3623 // lost-update "stomp" WAW race but detects and recovers as needed. 3624 // 3625 // A prototype implementation showed excellent results, although 3626 // the scavenger and timeout code was rather involved. 3627 3628 casn (mark_addr.base(), Rbox, Rscratch) ; 3629 cmp (Rbox, Rscratch); 3630 // Intentional fall through into done ... 3631 3632 bind (done) ; 3633 } 3634 3635 3636 3637 void MacroAssembler::print_CPU_state() { 3638 // %%%%% need to implement this 3639 } 3640 3641 void MacroAssembler::verify_FPU(int stack_depth, const char* s) { 3642 // %%%%% need to implement this 3643 } 3644 3645 void MacroAssembler::push_IU_state() { 3646 // %%%%% need to implement this 3647 } 3648 3649 3650 void MacroAssembler::pop_IU_state() { 3651 // %%%%% need to implement this 3652 } 3653 3654 3655 void MacroAssembler::push_FPU_state() { 3656 // %%%%% need to implement this 3657 } 3658 3659 3660 void MacroAssembler::pop_FPU_state() { 3661 // %%%%% need to implement this 3662 } 3663 3664 3665 void MacroAssembler::push_CPU_state() { 3666 // %%%%% need to implement this 3667 } 3668 3669 3670 void MacroAssembler::pop_CPU_state() { 3671 // %%%%% need to implement this 3672 } 3673 3674 3675 3676 void MacroAssembler::verify_tlab() { 3677 #ifdef ASSERT 3678 if (UseTLAB && VerifyOops) { 3679 Label next, next2, ok; 3680 Register t1 = L0; 3681 Register t2 = L1; 3682 Register t3 = L2; 3683 3684 save_frame(0); 3685 ld_ptr(G2_thread, in_bytes(JavaThread::tlab_top_offset()), t1); 3686 ld_ptr(G2_thread, in_bytes(JavaThread::tlab_start_offset()), t2); 3687 or3(t1, t2, t3); 3688 cmp(t1, t2); 3689 br(Assembler::greaterEqual, false, Assembler::pn, next); 3690 delayed()->nop(); 3691 stop("assert(top >= start)"); 3692 should_not_reach_here(); 3693 3694 bind(next); 3695 ld_ptr(G2_thread, in_bytes(JavaThread::tlab_top_offset()), t1); 3696 ld_ptr(G2_thread, in_bytes(JavaThread::tlab_end_offset()), t2); 3697 or3(t3, t2, t3); 3698 cmp(t1, t2); 3699 br(Assembler::lessEqual, false, Assembler::pn, next2); 3700 delayed()->nop(); 3701 stop("assert(top <= end)"); 3702 should_not_reach_here(); 3703 3704 bind(next2); 3705 and3(t3, MinObjAlignmentInBytesMask, t3); 3706 cmp(t3, 0); 3707 br(Assembler::lessEqual, false, Assembler::pn, ok); 3708 delayed()->nop(); 3709 stop("assert(aligned)"); 3710 should_not_reach_here(); 3711 3712 bind(ok); 3713 restore(); 3714 } 3715 #endif 3716 } 3717 3718 3719 void MacroAssembler::eden_allocate( 3720 Register obj, // result: pointer to object after successful allocation 3721 Register var_size_in_bytes, // object size in bytes if unknown at compile time; invalid otherwise 3722 int con_size_in_bytes, // object size in bytes if known at compile time 3723 Register t1, // temp register 3724 Register t2, // temp register 3725 Label& slow_case // continuation point if fast allocation fails 3726 ){ 3727 // make sure arguments make sense 3728 assert_different_registers(obj, var_size_in_bytes, t1, t2); 3729 assert(0 <= con_size_in_bytes && Assembler::is_simm13(con_size_in_bytes), "illegal object size"); 3730 assert((con_size_in_bytes & MinObjAlignmentInBytesMask) == 0, "object size is not multiple of alignment"); 3731 3732 if (CMSIncrementalMode || !Universe::heap()->supports_inline_contig_alloc()) { 3733 // No allocation in the shared eden. 3734 br(Assembler::always, false, Assembler::pt, slow_case); 3735 delayed()->nop(); 3736 } else { 3737 // get eden boundaries 3738 // note: we need both top & top_addr! 3739 const Register top_addr = t1; 3740 const Register end = t2; 3741 3742 CollectedHeap* ch = Universe::heap(); 3743 set((intx)ch->top_addr(), top_addr); 3744 intx delta = (intx)ch->end_addr() - (intx)ch->top_addr(); 3745 ld_ptr(top_addr, delta, end); 3746 ld_ptr(top_addr, 0, obj); 3747 3748 // try to allocate 3749 Label retry; 3750 bind(retry); 3751 #ifdef ASSERT 3752 // make sure eden top is properly aligned 3753 { 3754 Label L; 3755 btst(MinObjAlignmentInBytesMask, obj); 3756 br(Assembler::zero, false, Assembler::pt, L); 3757 delayed()->nop(); 3758 stop("eden top is not properly aligned"); 3759 bind(L); 3760 } 3761 #endif // ASSERT 3762 const Register free = end; 3763 sub(end, obj, free); // compute amount of free space 3764 if (var_size_in_bytes->is_valid()) { 3765 // size is unknown at compile time 3766 cmp(free, var_size_in_bytes); 3767 br(Assembler::lessUnsigned, false, Assembler::pn, slow_case); // if there is not enough space go the slow case 3768 delayed()->add(obj, var_size_in_bytes, end); 3769 } else { 3770 // size is known at compile time 3771 cmp(free, con_size_in_bytes); 3772 br(Assembler::lessUnsigned, false, Assembler::pn, slow_case); // if there is not enough space go the slow case 3773 delayed()->add(obj, con_size_in_bytes, end); 3774 } 3775 // Compare obj with the value at top_addr; if still equal, swap the value of 3776 // end with the value at top_addr. If not equal, read the value at top_addr 3777 // into end. 3778 casx_under_lock(top_addr, obj, end, (address)StubRoutines::Sparc::atomic_memory_operation_lock_addr()); 3779 // if someone beat us on the allocation, try again, otherwise continue 3780 cmp(obj, end); 3781 brx(Assembler::notEqual, false, Assembler::pn, retry); 3782 delayed()->mov(end, obj); // nop if successfull since obj == end 3783 3784 #ifdef ASSERT 3785 // make sure eden top is properly aligned 3786 { 3787 Label L; 3788 const Register top_addr = t1; 3789 3790 set((intx)ch->top_addr(), top_addr); 3791 ld_ptr(top_addr, 0, top_addr); 3792 btst(MinObjAlignmentInBytesMask, top_addr); 3793 br(Assembler::zero, false, Assembler::pt, L); 3794 delayed()->nop(); 3795 stop("eden top is not properly aligned"); 3796 bind(L); 3797 } 3798 #endif // ASSERT 3799 } 3800 } 3801 3802 3803 void MacroAssembler::tlab_allocate( 3804 Register obj, // result: pointer to object after successful allocation 3805 Register var_size_in_bytes, // object size in bytes if unknown at compile time; invalid otherwise 3806 int con_size_in_bytes, // object size in bytes if known at compile time 3807 Register t1, // temp register 3808 Label& slow_case // continuation point if fast allocation fails 3809 ){ 3810 // make sure arguments make sense 3811 assert_different_registers(obj, var_size_in_bytes, t1); 3812 assert(0 <= con_size_in_bytes && is_simm13(con_size_in_bytes), "illegal object size"); 3813 assert((con_size_in_bytes & MinObjAlignmentInBytesMask) == 0, "object size is not multiple of alignment"); 3814 3815 const Register free = t1; 3816 3817 verify_tlab(); 3818 3819 ld_ptr(G2_thread, in_bytes(JavaThread::tlab_top_offset()), obj); 3820 3821 // calculate amount of free space 3822 ld_ptr(G2_thread, in_bytes(JavaThread::tlab_end_offset()), free); 3823 sub(free, obj, free); 3824 3825 Label done; 3826 if (var_size_in_bytes == noreg) { 3827 cmp(free, con_size_in_bytes); 3828 } else { 3829 cmp(free, var_size_in_bytes); 3830 } 3831 br(Assembler::less, false, Assembler::pn, slow_case); 3832 // calculate the new top pointer 3833 if (var_size_in_bytes == noreg) { 3834 delayed()->add(obj, con_size_in_bytes, free); 3835 } else { 3836 delayed()->add(obj, var_size_in_bytes, free); 3837 } 3838 3839 bind(done); 3840 3841 #ifdef ASSERT 3842 // make sure new free pointer is properly aligned 3843 { 3844 Label L; 3845 btst(MinObjAlignmentInBytesMask, free); 3846 br(Assembler::zero, false, Assembler::pt, L); 3847 delayed()->nop(); 3848 stop("updated TLAB free is not properly aligned"); 3849 bind(L); 3850 } 3851 #endif // ASSERT 3852 3853 // update the tlab top pointer 3854 st_ptr(free, G2_thread, in_bytes(JavaThread::tlab_top_offset())); 3855 verify_tlab(); 3856 } 3857 3858 3859 void MacroAssembler::tlab_refill(Label& retry, Label& try_eden, Label& slow_case) { 3860 Register top = O0; 3861 Register t1 = G1; 3862 Register t2 = G3; 3863 Register t3 = O1; 3864 assert_different_registers(top, t1, t2, t3, G4, G5 /* preserve G4 and G5 */); 3865 Label do_refill, discard_tlab; 3866 3867 if (CMSIncrementalMode || !Universe::heap()->supports_inline_contig_alloc()) { 3868 // No allocation in the shared eden. 3869 br(Assembler::always, false, Assembler::pt, slow_case); 3870 delayed()->nop(); 3871 } 3872 3873 ld_ptr(G2_thread, in_bytes(JavaThread::tlab_top_offset()), top); 3874 ld_ptr(G2_thread, in_bytes(JavaThread::tlab_end_offset()), t1); 3875 ld_ptr(G2_thread, in_bytes(JavaThread::tlab_refill_waste_limit_offset()), t2); 3876 3877 // calculate amount of free space 3878 sub(t1, top, t1); 3879 srl_ptr(t1, LogHeapWordSize, t1); 3880 3881 // Retain tlab and allocate object in shared space if 3882 // the amount free in the tlab is too large to discard. 3883 cmp(t1, t2); 3884 brx(Assembler::lessEqual, false, Assembler::pt, discard_tlab); 3885 3886 // increment waste limit to prevent getting stuck on this slow path 3887 delayed()->add(t2, ThreadLocalAllocBuffer::refill_waste_limit_increment(), t2); 3888 st_ptr(t2, G2_thread, in_bytes(JavaThread::tlab_refill_waste_limit_offset())); 3889 if (TLABStats) { 3890 // increment number of slow_allocations 3891 ld(G2_thread, in_bytes(JavaThread::tlab_slow_allocations_offset()), t2); 3892 add(t2, 1, t2); 3893 stw(t2, G2_thread, in_bytes(JavaThread::tlab_slow_allocations_offset())); 3894 } 3895 br(Assembler::always, false, Assembler::pt, try_eden); 3896 delayed()->nop(); 3897 3898 bind(discard_tlab); 3899 if (TLABStats) { 3900 // increment number of refills 3901 ld(G2_thread, in_bytes(JavaThread::tlab_number_of_refills_offset()), t2); 3902 add(t2, 1, t2); 3903 stw(t2, G2_thread, in_bytes(JavaThread::tlab_number_of_refills_offset())); 3904 // accumulate wastage 3905 ld(G2_thread, in_bytes(JavaThread::tlab_fast_refill_waste_offset()), t2); 3906 add(t2, t1, t2); 3907 stw(t2, G2_thread, in_bytes(JavaThread::tlab_fast_refill_waste_offset())); 3908 } 3909 3910 // if tlab is currently allocated (top or end != null) then 3911 // fill [top, end + alignment_reserve) with array object 3912 br_null(top, false, Assembler::pn, do_refill); 3913 delayed()->nop(); 3914 3915 set((intptr_t)markOopDesc::prototype()->copy_set_hash(0x2), t2); 3916 st_ptr(t2, top, oopDesc::mark_offset_in_bytes()); // set up the mark word 3917 // set klass to intArrayKlass 3918 sub(t1, typeArrayOopDesc::header_size(T_INT), t1); 3919 add(t1, ThreadLocalAllocBuffer::alignment_reserve(), t1); 3920 sll_ptr(t1, log2_intptr(HeapWordSize/sizeof(jint)), t1); 3921 st(t1, top, arrayOopDesc::length_offset_in_bytes()); 3922 set((intptr_t)Universe::intArrayKlassObj_addr(), t2); 3923 ld_ptr(t2, 0, t2); 3924 // store klass last. concurrent gcs assumes klass length is valid if 3925 // klass field is not null. 3926 store_klass(t2, top); 3927 verify_oop(top); 3928 3929 // refill the tlab with an eden allocation 3930 bind(do_refill); 3931 ld_ptr(G2_thread, in_bytes(JavaThread::tlab_size_offset()), t1); 3932 sll_ptr(t1, LogHeapWordSize, t1); 3933 // add object_size ?? 3934 eden_allocate(top, t1, 0, t2, t3, slow_case); 3935 3936 st_ptr(top, G2_thread, in_bytes(JavaThread::tlab_start_offset())); 3937 st_ptr(top, G2_thread, in_bytes(JavaThread::tlab_top_offset())); 3938 #ifdef ASSERT 3939 // check that tlab_size (t1) is still valid 3940 { 3941 Label ok; 3942 ld_ptr(G2_thread, in_bytes(JavaThread::tlab_size_offset()), t2); 3943 sll_ptr(t2, LogHeapWordSize, t2); 3944 cmp(t1, t2); 3945 br(Assembler::equal, false, Assembler::pt, ok); 3946 delayed()->nop(); 3947 stop("assert(t1 == tlab_size)"); 3948 should_not_reach_here(); 3949 3950 bind(ok); 3951 } 3952 #endif // ASSERT 3953 add(top, t1, top); // t1 is tlab_size 3954 sub(top, ThreadLocalAllocBuffer::alignment_reserve_in_bytes(), top); 3955 st_ptr(top, G2_thread, in_bytes(JavaThread::tlab_end_offset())); 3956 verify_tlab(); 3957 br(Assembler::always, false, Assembler::pt, retry); 3958 delayed()->nop(); 3959 } 3960 3961 Assembler::Condition MacroAssembler::negate_condition(Assembler::Condition cond) { 3962 switch (cond) { 3963 // Note some conditions are synonyms for others 3964 case Assembler::never: return Assembler::always; 3965 case Assembler::zero: return Assembler::notZero; 3966 case Assembler::lessEqual: return Assembler::greater; 3967 case Assembler::less: return Assembler::greaterEqual; 3968 case Assembler::lessEqualUnsigned: return Assembler::greaterUnsigned; 3969 case Assembler::lessUnsigned: return Assembler::greaterEqualUnsigned; 3970 case Assembler::negative: return Assembler::positive; 3971 case Assembler::overflowSet: return Assembler::overflowClear; 3972 case Assembler::always: return Assembler::never; 3973 case Assembler::notZero: return Assembler::zero; 3974 case Assembler::greater: return Assembler::lessEqual; 3975 case Assembler::greaterEqual: return Assembler::less; 3976 case Assembler::greaterUnsigned: return Assembler::lessEqualUnsigned; 3977 case Assembler::greaterEqualUnsigned: return Assembler::lessUnsigned; 3978 case Assembler::positive: return Assembler::negative; 3979 case Assembler::overflowClear: return Assembler::overflowSet; 3980 } 3981 3982 ShouldNotReachHere(); return Assembler::overflowClear; 3983 } 3984 3985 void MacroAssembler::cond_inc(Assembler::Condition cond, address counter_ptr, 3986 Register Rtmp1, Register Rtmp2 /*, Register Rtmp3, Register Rtmp4 */) { 3987 Condition negated_cond = negate_condition(cond); 3988 Label L; 3989 brx(negated_cond, false, Assembler::pt, L); 3990 delayed()->nop(); 3991 inc_counter(counter_ptr, Rtmp1, Rtmp2); 3992 bind(L); 3993 } 3994 3995 void MacroAssembler::inc_counter(address counter_addr, Register Rtmp1, Register Rtmp2) { 3996 AddressLiteral addrlit(counter_addr); 3997 sethi(addrlit, Rtmp1); // Move hi22 bits into temporary register. 3998 Address addr(Rtmp1, addrlit.low10()); // Build an address with low10 bits. 3999 ld(addr, Rtmp2); 4000 inc(Rtmp2); 4001 st(Rtmp2, addr); 4002 } 4003 4004 void MacroAssembler::inc_counter(int* counter_addr, Register Rtmp1, Register Rtmp2) { 4005 inc_counter((address) counter_addr, Rtmp1, Rtmp2); 4006 } 4007 4008 SkipIfEqual::SkipIfEqual( 4009 MacroAssembler* masm, Register temp, const bool* flag_addr, 4010 Assembler::Condition condition) { 4011 _masm = masm; 4012 AddressLiteral flag(flag_addr); 4013 _masm->sethi(flag, temp); 4014 _masm->ldub(temp, flag.low10(), temp); 4015 _masm->tst(temp); 4016 _masm->br(condition, false, Assembler::pt, _label); 4017 _masm->delayed()->nop(); 4018 } 4019 4020 SkipIfEqual::~SkipIfEqual() { 4021 _masm->bind(_label); 4022 } 4023 4024 4025 // Writes to stack successive pages until offset reached to check for 4026 // stack overflow + shadow pages. This clobbers tsp and scratch. 4027 void MacroAssembler::bang_stack_size(Register Rsize, Register Rtsp, 4028 Register Rscratch) { 4029 // Use stack pointer in temp stack pointer 4030 mov(SP, Rtsp); 4031 4032 // Bang stack for total size given plus stack shadow page size. 4033 // Bang one page at a time because a large size can overflow yellow and 4034 // red zones (the bang will fail but stack overflow handling can't tell that 4035 // it was a stack overflow bang vs a regular segv). 4036 int offset = os::vm_page_size(); 4037 Register Roffset = Rscratch; 4038 4039 Label loop; 4040 bind(loop); 4041 set((-offset)+STACK_BIAS, Rscratch); 4042 st(G0, Rtsp, Rscratch); 4043 set(offset, Roffset); 4044 sub(Rsize, Roffset, Rsize); 4045 cmp(Rsize, G0); 4046 br(Assembler::greater, false, Assembler::pn, loop); 4047 delayed()->sub(Rtsp, Roffset, Rtsp); 4048 4049 // Bang down shadow pages too. 4050 // The -1 because we already subtracted 1 page. 4051 for (int i = 0; i< StackShadowPages-1; i++) { 4052 set((-i*offset)+STACK_BIAS, Rscratch); 4053 st(G0, Rtsp, Rscratch); 4054 } 4055 } 4056 4057 /////////////////////////////////////////////////////////////////////////////////// 4058 #ifndef SERIALGC 4059 4060 static uint num_stores = 0; 4061 static uint num_null_pre_stores = 0; 4062 4063 static void count_null_pre_vals(void* pre_val) { 4064 num_stores++; 4065 if (pre_val == NULL) num_null_pre_stores++; 4066 if ((num_stores % 1000000) == 0) { 4067 tty->print_cr(UINT32_FORMAT " stores, " UINT32_FORMAT " (%5.2f%%) with null pre-vals.", 4068 num_stores, num_null_pre_stores, 4069 100.0*(float)num_null_pre_stores/(float)num_stores); 4070 } 4071 } 4072 4073 static address satb_log_enqueue_with_frame = 0; 4074 static u_char* satb_log_enqueue_with_frame_end = 0; 4075 4076 static address satb_log_enqueue_frameless = 0; 4077 static u_char* satb_log_enqueue_frameless_end = 0; 4078 4079 static int EnqueueCodeSize = 128 DEBUG_ONLY( + 256); // Instructions? 4080 4081 // The calls to this don't work. We'd need to do a fair amount of work to 4082 // make it work. 4083 static void check_index(int ind) { 4084 assert(0 <= ind && ind <= 64*K && ((ind % oopSize) == 0), 4085 "Invariants.") 4086 } 4087 4088 static void generate_satb_log_enqueue(bool with_frame) { 4089 BufferBlob* bb = BufferBlob::create("enqueue_with_frame", EnqueueCodeSize); 4090 CodeBuffer buf(bb->instructions_begin(), bb->instructions_size()); 4091 MacroAssembler masm(&buf); 4092 address start = masm.pc(); 4093 Register pre_val; 4094 4095 Label refill, restart; 4096 if (with_frame) { 4097 masm.save_frame(0); 4098 pre_val = I0; // Was O0 before the save. 4099 } else { 4100 pre_val = O0; 4101 } 4102 int satb_q_index_byte_offset = 4103 in_bytes(JavaThread::satb_mark_queue_offset() + 4104 PtrQueue::byte_offset_of_index()); 4105 int satb_q_buf_byte_offset = 4106 in_bytes(JavaThread::satb_mark_queue_offset() + 4107 PtrQueue::byte_offset_of_buf()); 4108 assert(in_bytes(PtrQueue::byte_width_of_index()) == sizeof(intptr_t) && 4109 in_bytes(PtrQueue::byte_width_of_buf()) == sizeof(intptr_t), 4110 "check sizes in assembly below"); 4111 4112 masm.bind(restart); 4113 masm.ld_ptr(G2_thread, satb_q_index_byte_offset, L0); 4114 4115 masm.br_on_reg_cond(Assembler::rc_z, /*annul*/false, Assembler::pn, L0, refill); 4116 // If the branch is taken, no harm in executing this in the delay slot. 4117 masm.delayed()->ld_ptr(G2_thread, satb_q_buf_byte_offset, L1); 4118 masm.sub(L0, oopSize, L0); 4119 4120 masm.st_ptr(pre_val, L1, L0); // [_buf + index] := I0 4121 if (!with_frame) { 4122 // Use return-from-leaf 4123 masm.retl(); 4124 masm.delayed()->st_ptr(L0, G2_thread, satb_q_index_byte_offset); 4125 } else { 4126 // Not delayed. 4127 masm.st_ptr(L0, G2_thread, satb_q_index_byte_offset); 4128 } 4129 if (with_frame) { 4130 masm.ret(); 4131 masm.delayed()->restore(); 4132 } 4133 masm.bind(refill); 4134 4135 address handle_zero = 4136 CAST_FROM_FN_PTR(address, 4137 &SATBMarkQueueSet::handle_zero_index_for_thread); 4138 // This should be rare enough that we can afford to save all the 4139 // scratch registers that the calling context might be using. 4140 masm.mov(G1_scratch, L0); 4141 masm.mov(G3_scratch, L1); 4142 masm.mov(G4, L2); 4143 // We need the value of O0 above (for the write into the buffer), so we 4144 // save and restore it. 4145 masm.mov(O0, L3); 4146 // Since the call will overwrite O7, we save and restore that, as well. 4147 masm.mov(O7, L4); 4148 masm.call_VM_leaf(L5, handle_zero, G2_thread); 4149 masm.mov(L0, G1_scratch); 4150 masm.mov(L1, G3_scratch); 4151 masm.mov(L2, G4); 4152 masm.mov(L3, O0); 4153 masm.br(Assembler::always, /*annul*/false, Assembler::pt, restart); 4154 masm.delayed()->mov(L4, O7); 4155 4156 if (with_frame) { 4157 satb_log_enqueue_with_frame = start; 4158 satb_log_enqueue_with_frame_end = masm.pc(); 4159 } else { 4160 satb_log_enqueue_frameless = start; 4161 satb_log_enqueue_frameless_end = masm.pc(); 4162 } 4163 } 4164 4165 static inline void generate_satb_log_enqueue_if_necessary(bool with_frame) { 4166 if (with_frame) { 4167 if (satb_log_enqueue_with_frame == 0) { 4168 generate_satb_log_enqueue(with_frame); 4169 assert(satb_log_enqueue_with_frame != 0, "postcondition."); 4170 if (G1SATBPrintStubs) { 4171 tty->print_cr("Generated with-frame satb enqueue:"); 4172 Disassembler::decode((u_char*)satb_log_enqueue_with_frame, 4173 satb_log_enqueue_with_frame_end, 4174 tty); 4175 } 4176 } 4177 } else { 4178 if (satb_log_enqueue_frameless == 0) { 4179 generate_satb_log_enqueue(with_frame); 4180 assert(satb_log_enqueue_frameless != 0, "postcondition."); 4181 if (G1SATBPrintStubs) { 4182 tty->print_cr("Generated frameless satb enqueue:"); 4183 Disassembler::decode((u_char*)satb_log_enqueue_frameless, 4184 satb_log_enqueue_frameless_end, 4185 tty); 4186 } 4187 } 4188 } 4189 } 4190 4191 void MacroAssembler::g1_write_barrier_pre(Register obj, Register index, int offset, Register tmp, bool preserve_o_regs) { 4192 assert(offset == 0 || index == noreg, "choose one"); 4193 4194 if (G1DisablePreBarrier) return; 4195 // satb_log_barrier(tmp, obj, offset, preserve_o_regs); 4196 Label filtered; 4197 // satb_log_barrier_work0(tmp, filtered); 4198 if (in_bytes(PtrQueue::byte_width_of_active()) == 4) { 4199 ld(G2, 4200 in_bytes(JavaThread::satb_mark_queue_offset() + 4201 PtrQueue::byte_offset_of_active()), 4202 tmp); 4203 } else { 4204 guarantee(in_bytes(PtrQueue::byte_width_of_active()) == 1, 4205 "Assumption"); 4206 ldsb(G2, 4207 in_bytes(JavaThread::satb_mark_queue_offset() + 4208 PtrQueue::byte_offset_of_active()), 4209 tmp); 4210 } 4211 4212 // Check on whether to annul. 4213 br_on_reg_cond(rc_z, /*annul*/false, Assembler::pt, tmp, filtered); 4214 delayed() -> nop(); 4215 4216 // satb_log_barrier_work1(tmp, offset); 4217 if (index == noreg) { 4218 if (Assembler::is_simm13(offset)) { 4219 load_heap_oop(obj, offset, tmp); 4220 } else { 4221 set(offset, tmp); 4222 load_heap_oop(obj, tmp, tmp); 4223 } 4224 } else { 4225 load_heap_oop(obj, index, tmp); 4226 } 4227 4228 // satb_log_barrier_work2(obj, tmp, offset); 4229 4230 // satb_log_barrier_work3(tmp, filtered, preserve_o_regs); 4231 4232 const Register pre_val = tmp; 4233 4234 if (G1SATBBarrierPrintNullPreVals) { 4235 save_frame(0); 4236 mov(pre_val, O0); 4237 // Save G-regs that target may use. 4238 mov(G1, L1); 4239 mov(G2, L2); 4240 mov(G3, L3); 4241 mov(G4, L4); 4242 mov(G5, L5); 4243 call(CAST_FROM_FN_PTR(address, &count_null_pre_vals)); 4244 delayed()->nop(); 4245 // Restore G-regs that target may have used. 4246 mov(L1, G1); 4247 mov(L2, G2); 4248 mov(L3, G3); 4249 mov(L4, G4); 4250 mov(L5, G5); 4251 restore(G0, G0, G0); 4252 } 4253 4254 // Check on whether to annul. 4255 br_on_reg_cond(rc_z, /*annul*/false, Assembler::pt, pre_val, filtered); 4256 delayed() -> nop(); 4257 4258 // OK, it's not filtered, so we'll need to call enqueue. In the normal 4259 // case, pre_val will be a scratch G-reg, but there's some cases in which 4260 // it's an O-reg. In the first case, do a normal call. In the latter, 4261 // do a save here and call the frameless version. 4262 4263 guarantee(pre_val->is_global() || pre_val->is_out(), 4264 "Or we need to think harder."); 4265 if (pre_val->is_global() && !preserve_o_regs) { 4266 generate_satb_log_enqueue_if_necessary(true); // with frame. 4267 call(satb_log_enqueue_with_frame); 4268 delayed()->mov(pre_val, O0); 4269 } else { 4270 generate_satb_log_enqueue_if_necessary(false); // with frameless. 4271 save_frame(0); 4272 call(satb_log_enqueue_frameless); 4273 delayed()->mov(pre_val->after_save(), O0); 4274 restore(); 4275 } 4276 4277 bind(filtered); 4278 } 4279 4280 static jint num_ct_writes = 0; 4281 static jint num_ct_writes_filtered_in_hr = 0; 4282 static jint num_ct_writes_filtered_null = 0; 4283 static G1CollectedHeap* g1 = NULL; 4284 4285 static Thread* count_ct_writes(void* filter_val, void* new_val) { 4286 Atomic::inc(&num_ct_writes); 4287 if (filter_val == NULL) { 4288 Atomic::inc(&num_ct_writes_filtered_in_hr); 4289 } else if (new_val == NULL) { 4290 Atomic::inc(&num_ct_writes_filtered_null); 4291 } else { 4292 if (g1 == NULL) { 4293 g1 = G1CollectedHeap::heap(); 4294 } 4295 } 4296 if ((num_ct_writes % 1000000) == 0) { 4297 jint num_ct_writes_filtered = 4298 num_ct_writes_filtered_in_hr + 4299 num_ct_writes_filtered_null; 4300 4301 tty->print_cr("%d potential CT writes: %5.2f%% filtered\n" 4302 " (%5.2f%% intra-HR, %5.2f%% null).", 4303 num_ct_writes, 4304 100.0*(float)num_ct_writes_filtered/(float)num_ct_writes, 4305 100.0*(float)num_ct_writes_filtered_in_hr/ 4306 (float)num_ct_writes, 4307 100.0*(float)num_ct_writes_filtered_null/ 4308 (float)num_ct_writes); 4309 } 4310 return Thread::current(); 4311 } 4312 4313 static address dirty_card_log_enqueue = 0; 4314 static u_char* dirty_card_log_enqueue_end = 0; 4315 4316 // This gets to assume that o0 contains the object address. 4317 static void generate_dirty_card_log_enqueue(jbyte* byte_map_base) { 4318 BufferBlob* bb = BufferBlob::create("dirty_card_enqueue", EnqueueCodeSize*2); 4319 CodeBuffer buf(bb->instructions_begin(), bb->instructions_size()); 4320 MacroAssembler masm(&buf); 4321 address start = masm.pc(); 4322 4323 Label not_already_dirty, restart, refill; 4324 4325 #ifdef _LP64 4326 masm.srlx(O0, CardTableModRefBS::card_shift, O0); 4327 #else 4328 masm.srl(O0, CardTableModRefBS::card_shift, O0); 4329 #endif 4330 AddressLiteral addrlit(byte_map_base); 4331 masm.set(addrlit, O1); // O1 := <card table base> 4332 masm.ldub(O0, O1, O2); // O2 := [O0 + O1] 4333 4334 masm.br_on_reg_cond(Assembler::rc_nz, /*annul*/false, Assembler::pt, 4335 O2, not_already_dirty); 4336 // Get O1 + O2 into a reg by itself -- useful in the take-the-branch 4337 // case, harmless if not. 4338 masm.delayed()->add(O0, O1, O3); 4339 4340 // We didn't take the branch, so we're already dirty: return. 4341 // Use return-from-leaf 4342 masm.retl(); 4343 masm.delayed()->nop(); 4344 4345 // Not dirty. 4346 masm.bind(not_already_dirty); 4347 // First, dirty it. 4348 masm.stb(G0, O3, G0); // [cardPtr] := 0 (i.e., dirty). 4349 int dirty_card_q_index_byte_offset = 4350 in_bytes(JavaThread::dirty_card_queue_offset() + 4351 PtrQueue::byte_offset_of_index()); 4352 int dirty_card_q_buf_byte_offset = 4353 in_bytes(JavaThread::dirty_card_queue_offset() + 4354 PtrQueue::byte_offset_of_buf()); 4355 masm.bind(restart); 4356 masm.ld_ptr(G2_thread, dirty_card_q_index_byte_offset, L0); 4357 4358 masm.br_on_reg_cond(Assembler::rc_z, /*annul*/false, Assembler::pn, 4359 L0, refill); 4360 // If the branch is taken, no harm in executing this in the delay slot. 4361 masm.delayed()->ld_ptr(G2_thread, dirty_card_q_buf_byte_offset, L1); 4362 masm.sub(L0, oopSize, L0); 4363 4364 masm.st_ptr(O3, L1, L0); // [_buf + index] := I0 4365 // Use return-from-leaf 4366 masm.retl(); 4367 masm.delayed()->st_ptr(L0, G2_thread, dirty_card_q_index_byte_offset); 4368 4369 masm.bind(refill); 4370 address handle_zero = 4371 CAST_FROM_FN_PTR(address, 4372 &DirtyCardQueueSet::handle_zero_index_for_thread); 4373 // This should be rare enough that we can afford to save all the 4374 // scratch registers that the calling context might be using. 4375 masm.mov(G1_scratch, L3); 4376 masm.mov(G3_scratch, L5); 4377 // We need the value of O3 above (for the write into the buffer), so we 4378 // save and restore it. 4379 masm.mov(O3, L6); 4380 // Since the call will overwrite O7, we save and restore that, as well. 4381 masm.mov(O7, L4); 4382 4383 masm.call_VM_leaf(L7_thread_cache, handle_zero, G2_thread); 4384 masm.mov(L3, G1_scratch); 4385 masm.mov(L5, G3_scratch); 4386 masm.mov(L6, O3); 4387 masm.br(Assembler::always, /*annul*/false, Assembler::pt, restart); 4388 masm.delayed()->mov(L4, O7); 4389 4390 dirty_card_log_enqueue = start; 4391 dirty_card_log_enqueue_end = masm.pc(); 4392 // XXX Should have a guarantee here about not going off the end! 4393 // Does it already do so? Do an experiment... 4394 } 4395 4396 static inline void 4397 generate_dirty_card_log_enqueue_if_necessary(jbyte* byte_map_base) { 4398 if (dirty_card_log_enqueue == 0) { 4399 generate_dirty_card_log_enqueue(byte_map_base); 4400 assert(dirty_card_log_enqueue != 0, "postcondition."); 4401 if (G1SATBPrintStubs) { 4402 tty->print_cr("Generated dirty_card enqueue:"); 4403 Disassembler::decode((u_char*)dirty_card_log_enqueue, 4404 dirty_card_log_enqueue_end, 4405 tty); 4406 } 4407 } 4408 } 4409 4410 4411 void MacroAssembler::g1_write_barrier_post(Register store_addr, Register new_val, Register tmp) { 4412 4413 Label filtered; 4414 MacroAssembler* post_filter_masm = this; 4415 4416 if (new_val == G0) return; 4417 if (G1DisablePostBarrier) return; 4418 4419 G1SATBCardTableModRefBS* bs = (G1SATBCardTableModRefBS*) Universe::heap()->barrier_set(); 4420 assert(bs->kind() == BarrierSet::G1SATBCT || 4421 bs->kind() == BarrierSet::G1SATBCTLogging, "wrong barrier"); 4422 if (G1RSBarrierRegionFilter) { 4423 xor3(store_addr, new_val, tmp); 4424 #ifdef _LP64 4425 srlx(tmp, HeapRegion::LogOfHRGrainBytes, tmp); 4426 #else 4427 srl(tmp, HeapRegion::LogOfHRGrainBytes, tmp); 4428 #endif 4429 if (G1PrintCTFilterStats) { 4430 guarantee(tmp->is_global(), "Or stats won't work..."); 4431 // This is a sleazy hack: I'm temporarily hijacking G2, which I 4432 // promise to restore. 4433 mov(new_val, G2); 4434 save_frame(0); 4435 mov(tmp, O0); 4436 mov(G2, O1); 4437 // Save G-regs that target may use. 4438 mov(G1, L1); 4439 mov(G2, L2); 4440 mov(G3, L3); 4441 mov(G4, L4); 4442 mov(G5, L5); 4443 call(CAST_FROM_FN_PTR(address, &count_ct_writes)); 4444 delayed()->nop(); 4445 mov(O0, G2); 4446 // Restore G-regs that target may have used. 4447 mov(L1, G1); 4448 mov(L3, G3); 4449 mov(L4, G4); 4450 mov(L5, G5); 4451 restore(G0, G0, G0); 4452 } 4453 // XXX Should I predict this taken or not? Does it mattern? 4454 br_on_reg_cond(rc_z, /*annul*/false, Assembler::pt, tmp, filtered); 4455 delayed()->nop(); 4456 } 4457 4458 // If the "store_addr" register is an "in" or "local" register, move it to 4459 // a scratch reg so we can pass it as an argument. 4460 bool use_scr = !(store_addr->is_global() || store_addr->is_out()); 4461 // Pick a scratch register different from "tmp". 4462 Register scr = (tmp == G1_scratch ? G3_scratch : G1_scratch); 4463 // Make sure we use up the delay slot! 4464 if (use_scr) { 4465 post_filter_masm->mov(store_addr, scr); 4466 } else { 4467 post_filter_masm->nop(); 4468 } 4469 generate_dirty_card_log_enqueue_if_necessary(bs->byte_map_base); 4470 save_frame(0); 4471 call(dirty_card_log_enqueue); 4472 if (use_scr) { 4473 delayed()->mov(scr, O0); 4474 } else { 4475 delayed()->mov(store_addr->after_save(), O0); 4476 } 4477 restore(); 4478 4479 bind(filtered); 4480 4481 } 4482 4483 #endif // SERIALGC 4484 /////////////////////////////////////////////////////////////////////////////////// 4485 4486 void MacroAssembler::card_write_barrier_post(Register store_addr, Register new_val, Register tmp) { 4487 // If we're writing constant NULL, we can skip the write barrier. 4488 if (new_val == G0) return; 4489 CardTableModRefBS* bs = (CardTableModRefBS*) Universe::heap()->barrier_set(); 4490 assert(bs->kind() == BarrierSet::CardTableModRef || 4491 bs->kind() == BarrierSet::CardTableExtension, "wrong barrier"); 4492 card_table_write(bs->byte_map_base, tmp, store_addr); 4493 } 4494 4495 void MacroAssembler::load_klass(Register src_oop, Register klass) { 4496 // The number of bytes in this code is used by 4497 // MachCallDynamicJavaNode::ret_addr_offset() 4498 // if this changes, change that. 4499 if (UseCompressedOops) { 4500 lduw(src_oop, oopDesc::klass_offset_in_bytes(), klass); 4501 decode_heap_oop_not_null(klass); 4502 } else { 4503 ld_ptr(src_oop, oopDesc::klass_offset_in_bytes(), klass); 4504 } 4505 } 4506 4507 void MacroAssembler::store_klass(Register klass, Register dst_oop) { 4508 if (UseCompressedOops) { 4509 assert(dst_oop != klass, "not enough registers"); 4510 encode_heap_oop_not_null(klass); 4511 st(klass, dst_oop, oopDesc::klass_offset_in_bytes()); 4512 } else { 4513 st_ptr(klass, dst_oop, oopDesc::klass_offset_in_bytes()); 4514 } 4515 } 4516 4517 void MacroAssembler::store_klass_gap(Register s, Register d) { 4518 if (UseCompressedOops) { 4519 assert(s != d, "not enough registers"); 4520 st(s, d, oopDesc::klass_gap_offset_in_bytes()); 4521 } 4522 } 4523 4524 void MacroAssembler::load_heap_oop(const Address& s, Register d) { 4525 if (UseCompressedOops) { 4526 lduw(s, d); 4527 decode_heap_oop(d); 4528 } else { 4529 ld_ptr(s, d); 4530 } 4531 } 4532 4533 void MacroAssembler::load_heap_oop(Register s1, Register s2, Register d) { 4534 if (UseCompressedOops) { 4535 lduw(s1, s2, d); 4536 decode_heap_oop(d, d); 4537 } else { 4538 ld_ptr(s1, s2, d); 4539 } 4540 } 4541 4542 void MacroAssembler::load_heap_oop(Register s1, int simm13a, Register d) { 4543 if (UseCompressedOops) { 4544 lduw(s1, simm13a, d); 4545 decode_heap_oop(d, d); 4546 } else { 4547 ld_ptr(s1, simm13a, d); 4548 } 4549 } 4550 4551 void MacroAssembler::store_heap_oop(Register d, Register s1, Register s2) { 4552 if (UseCompressedOops) { 4553 assert(s1 != d && s2 != d, "not enough registers"); 4554 encode_heap_oop(d); 4555 st(d, s1, s2); 4556 } else { 4557 st_ptr(d, s1, s2); 4558 } 4559 } 4560 4561 void MacroAssembler::store_heap_oop(Register d, Register s1, int simm13a) { 4562 if (UseCompressedOops) { 4563 assert(s1 != d, "not enough registers"); 4564 encode_heap_oop(d); 4565 st(d, s1, simm13a); 4566 } else { 4567 st_ptr(d, s1, simm13a); 4568 } 4569 } 4570 4571 void MacroAssembler::store_heap_oop(Register d, const Address& a, int offset) { 4572 if (UseCompressedOops) { 4573 assert(a.base() != d, "not enough registers"); 4574 encode_heap_oop(d); 4575 st(d, a, offset); 4576 } else { 4577 st_ptr(d, a, offset); 4578 } 4579 } 4580 4581 4582 void MacroAssembler::encode_heap_oop(Register src, Register dst) { 4583 assert (UseCompressedOops, "must be compressed"); 4584 assert (Universe::heap() != NULL, "java heap should be initialized"); 4585 assert (LogMinObjAlignmentInBytes == Universe::narrow_oop_shift(), "decode alg wrong"); 4586 verify_oop(src); 4587 if (Universe::narrow_oop_base() == NULL) { 4588 srlx(src, LogMinObjAlignmentInBytes, dst); 4589 return; 4590 } 4591 Label done; 4592 if (src == dst) { 4593 // optimize for frequent case src == dst 4594 bpr(rc_nz, true, Assembler::pt, src, done); 4595 delayed() -> sub(src, G6_heapbase, dst); // annuled if not taken 4596 bind(done); 4597 srlx(src, LogMinObjAlignmentInBytes, dst); 4598 } else { 4599 bpr(rc_z, false, Assembler::pn, src, done); 4600 delayed() -> mov(G0, dst); 4601 // could be moved before branch, and annulate delay, 4602 // but may add some unneeded work decoding null 4603 sub(src, G6_heapbase, dst); 4604 srlx(dst, LogMinObjAlignmentInBytes, dst); 4605 bind(done); 4606 } 4607 } 4608 4609 4610 void MacroAssembler::encode_heap_oop_not_null(Register r) { 4611 assert (UseCompressedOops, "must be compressed"); 4612 assert (Universe::heap() != NULL, "java heap should be initialized"); 4613 assert (LogMinObjAlignmentInBytes == Universe::narrow_oop_shift(), "decode alg wrong"); 4614 verify_oop(r); 4615 if (Universe::narrow_oop_base() != NULL) 4616 sub(r, G6_heapbase, r); 4617 srlx(r, LogMinObjAlignmentInBytes, r); 4618 } 4619 4620 void MacroAssembler::encode_heap_oop_not_null(Register src, Register dst) { 4621 assert (UseCompressedOops, "must be compressed"); 4622 assert (Universe::heap() != NULL, "java heap should be initialized"); 4623 assert (LogMinObjAlignmentInBytes == Universe::narrow_oop_shift(), "decode alg wrong"); 4624 verify_oop(src); 4625 if (Universe::narrow_oop_base() == NULL) { 4626 srlx(src, LogMinObjAlignmentInBytes, dst); 4627 } else { 4628 sub(src, G6_heapbase, dst); 4629 srlx(dst, LogMinObjAlignmentInBytes, dst); 4630 } 4631 } 4632 4633 // Same algorithm as oops.inline.hpp decode_heap_oop. 4634 void MacroAssembler::decode_heap_oop(Register src, Register dst) { 4635 assert (UseCompressedOops, "must be compressed"); 4636 assert (Universe::heap() != NULL, "java heap should be initialized"); 4637 assert (LogMinObjAlignmentInBytes == Universe::narrow_oop_shift(), "decode alg wrong"); 4638 sllx(src, LogMinObjAlignmentInBytes, dst); 4639 if (Universe::narrow_oop_base() != NULL) { 4640 Label done; 4641 bpr(rc_nz, true, Assembler::pt, dst, done); 4642 delayed() -> add(dst, G6_heapbase, dst); // annuled if not taken 4643 bind(done); 4644 } 4645 verify_oop(dst); 4646 } 4647 4648 void MacroAssembler::decode_heap_oop_not_null(Register r) { 4649 // Do not add assert code to this unless you change vtableStubs_sparc.cpp 4650 // pd_code_size_limit. 4651 // Also do not verify_oop as this is called by verify_oop. 4652 assert (UseCompressedOops, "must be compressed"); 4653 assert (Universe::heap() != NULL, "java heap should be initialized"); 4654 assert (LogMinObjAlignmentInBytes == Universe::narrow_oop_shift(), "decode alg wrong"); 4655 sllx(r, LogMinObjAlignmentInBytes, r); 4656 if (Universe::narrow_oop_base() != NULL) 4657 add(r, G6_heapbase, r); 4658 } 4659 4660 void MacroAssembler::decode_heap_oop_not_null(Register src, Register dst) { 4661 // Do not add assert code to this unless you change vtableStubs_sparc.cpp 4662 // pd_code_size_limit. 4663 // Also do not verify_oop as this is called by verify_oop. 4664 assert (UseCompressedOops, "must be compressed"); 4665 assert (Universe::heap() != NULL, "java heap should be initialized"); 4666 assert (LogMinObjAlignmentInBytes == Universe::narrow_oop_shift(), "decode alg wrong"); 4667 sllx(src, LogMinObjAlignmentInBytes, dst); 4668 if (Universe::narrow_oop_base() != NULL) 4669 add(dst, G6_heapbase, dst); 4670 } 4671 4672 void MacroAssembler::reinit_heapbase() { 4673 if (UseCompressedOops) { 4674 // call indirectly to solve generation ordering problem 4675 AddressLiteral base(Universe::narrow_oop_base_addr()); 4676 load_ptr_contents(base, G6_heapbase); 4677 } 4678 }