1 /* 2 * Copyright (c) 1999, 2012, Oracle and/or its affiliates. All rights reserved. 3 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. 4 * 5 * This code is free software; you can redistribute it and/or modify it 6 * under the terms of the GNU General Public License version 2 only, as 7 * published by the Free Software Foundation. 8 * 9 * This code is distributed in the hope that it will be useful, but WITHOUT 10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License 12 * version 2 for more details (a copy is included in the LICENSE file that 13 * accompanied this code). 14 * 15 * You should have received a copy of the GNU General Public License version 16 * 2 along with this work; if not, write to the Free Software Foundation, 17 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. 18 * 19 * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA 20 * or visit www.oracle.com if you need additional information or have any 21 * questions. 22 * 23 */ 24 25 #include "precompiled.hpp" 26 #include "asm/macroAssembler.hpp" 27 #include "asm/macroAssembler.inline.hpp" 28 #include "interpreter/interpreter.hpp" 29 #include "nativeInst_x86.hpp" 30 #include "oops/instanceOop.hpp" 31 #include "oops/method.hpp" 32 #include "oops/objArrayKlass.hpp" 33 #include "oops/oop.inline.hpp" 34 #include "prims/methodHandles.hpp" 35 #include "runtime/frame.inline.hpp" 36 #include "runtime/handles.inline.hpp" 37 #include "runtime/sharedRuntime.hpp" 38 #include "runtime/stubCodeGenerator.hpp" 39 #include "runtime/stubRoutines.hpp" 40 #include "runtime/thread.inline.hpp" 41 #include "utilities/top.hpp" 42 #ifdef COMPILER2 43 #include "opto/runtime.hpp" 44 #endif 45 46 // Declaration and definition of StubGenerator (no .hpp file). 47 // For a more detailed description of the stub routine structure 48 // see the comment in stubRoutines.hpp 49 50 #define __ _masm-> 51 #define a__ ((Assembler*)_masm)-> 52 53 #ifdef PRODUCT 54 #define BLOCK_COMMENT(str) /* nothing */ 55 #else 56 #define BLOCK_COMMENT(str) __ block_comment(str) 57 #endif 58 59 #define BIND(label) bind(label); BLOCK_COMMENT(#label ":") 60 61 const int MXCSR_MASK = 0xFFC0; // Mask out any pending exceptions 62 const int FPU_CNTRL_WRD_MASK = 0xFFFF; 63 64 // ------------------------------------------------------------------------------------------------------------------------- 65 // Stub Code definitions 66 67 static address handle_unsafe_access() { 68 JavaThread* thread = JavaThread::current(); 69 address pc = thread->saved_exception_pc(); 70 // pc is the instruction which we must emulate 71 // doing a no-op is fine: return garbage from the load 72 // therefore, compute npc 73 address npc = Assembler::locate_next_instruction(pc); 74 75 // request an async exception 76 thread->set_pending_unsafe_access_error(); 77 78 // return address of next instruction to execute 79 return npc; 80 } 81 82 class StubGenerator: public StubCodeGenerator { 83 private: 84 85 #ifdef PRODUCT 86 #define inc_counter_np(counter) (0) 87 #else 88 void inc_counter_np_(int& counter) { 89 __ incrementl(ExternalAddress((address)&counter)); 90 } 91 #define inc_counter_np(counter) \ 92 BLOCK_COMMENT("inc_counter " #counter); \ 93 inc_counter_np_(counter); 94 #endif //PRODUCT 95 96 void inc_copy_counter_np(BasicType t) { 97 #ifndef PRODUCT 98 switch (t) { 99 case T_BYTE: inc_counter_np(SharedRuntime::_jbyte_array_copy_ctr); return; 100 case T_SHORT: inc_counter_np(SharedRuntime::_jshort_array_copy_ctr); return; 101 case T_INT: inc_counter_np(SharedRuntime::_jint_array_copy_ctr); return; 102 case T_LONG: inc_counter_np(SharedRuntime::_jlong_array_copy_ctr); return; 103 case T_OBJECT: inc_counter_np(SharedRuntime::_oop_array_copy_ctr); return; 104 } 105 ShouldNotReachHere(); 106 #endif //PRODUCT 107 } 108 109 //------------------------------------------------------------------------------------------------------------------------ 110 // Call stubs are used to call Java from C 111 // 112 // [ return_from_Java ] <--- rsp 113 // [ argument word n ] 114 // ... 115 // -N [ argument word 1 ] 116 // -7 [ Possible padding for stack alignment ] 117 // -6 [ Possible padding for stack alignment ] 118 // -5 [ Possible padding for stack alignment ] 119 // -4 [ mxcsr save ] <--- rsp_after_call 120 // -3 [ saved rbx, ] 121 // -2 [ saved rsi ] 122 // -1 [ saved rdi ] 123 // 0 [ saved rbp, ] <--- rbp, 124 // 1 [ return address ] 125 // 2 [ ptr. to call wrapper ] 126 // 3 [ result ] 127 // 4 [ result_type ] 128 // 5 [ method ] 129 // 6 [ entry_point ] 130 // 7 [ parameters ] 131 // 8 [ parameter_size ] 132 // 9 [ thread ] 133 134 135 address generate_call_stub(address& return_address) { 136 StubCodeMark mark(this, "StubRoutines", "call_stub"); 137 address start = __ pc(); 138 139 // stub code parameters / addresses 140 assert(frame::entry_frame_call_wrapper_offset == 2, "adjust this code"); 141 bool sse_save = false; 142 const Address rsp_after_call(rbp, -4 * wordSize); // same as in generate_catch_exception()! 143 const int locals_count_in_bytes (4*wordSize); 144 const Address mxcsr_save (rbp, -4 * wordSize); 145 const Address saved_rbx (rbp, -3 * wordSize); 146 const Address saved_rsi (rbp, -2 * wordSize); 147 const Address saved_rdi (rbp, -1 * wordSize); 148 const Address result (rbp, 3 * wordSize); 149 const Address result_type (rbp, 4 * wordSize); 150 const Address method (rbp, 5 * wordSize); 151 const Address entry_point (rbp, 6 * wordSize); 152 const Address parameters (rbp, 7 * wordSize); 153 const Address parameter_size(rbp, 8 * wordSize); 154 const Address thread (rbp, 9 * wordSize); // same as in generate_catch_exception()! 155 sse_save = UseSSE > 0; 156 157 // stub code 158 __ enter(); 159 __ movptr(rcx, parameter_size); // parameter counter 160 __ shlptr(rcx, Interpreter::logStackElementSize); // convert parameter count to bytes 161 __ addptr(rcx, locals_count_in_bytes); // reserve space for register saves 162 __ subptr(rsp, rcx); 163 __ andptr(rsp, -(StackAlignmentInBytes)); // Align stack 164 165 // save rdi, rsi, & rbx, according to C calling conventions 166 __ movptr(saved_rdi, rdi); 167 __ movptr(saved_rsi, rsi); 168 __ movptr(saved_rbx, rbx); 169 // save and initialize %mxcsr 170 if (sse_save) { 171 Label skip_ldmx; 172 __ stmxcsr(mxcsr_save); 173 __ movl(rax, mxcsr_save); 174 __ andl(rax, MXCSR_MASK); // Only check control and mask bits 175 ExternalAddress mxcsr_std(StubRoutines::addr_mxcsr_std()); 176 __ cmp32(rax, mxcsr_std); 177 __ jcc(Assembler::equal, skip_ldmx); 178 __ ldmxcsr(mxcsr_std); 179 __ bind(skip_ldmx); 180 } 181 182 // make sure the control word is correct. 183 __ fldcw(ExternalAddress(StubRoutines::addr_fpu_cntrl_wrd_std())); 184 185 #ifdef ASSERT 186 // make sure we have no pending exceptions 187 { Label L; 188 __ movptr(rcx, thread); 189 __ cmpptr(Address(rcx, Thread::pending_exception_offset()), (int32_t)NULL_WORD); 190 __ jcc(Assembler::equal, L); 191 __ stop("StubRoutines::call_stub: entered with pending exception"); 192 __ bind(L); 193 } 194 #endif 195 196 // pass parameters if any 197 BLOCK_COMMENT("pass parameters if any"); 198 Label parameters_done; 199 __ movl(rcx, parameter_size); // parameter counter 200 __ testl(rcx, rcx); 201 __ jcc(Assembler::zero, parameters_done); 202 203 // parameter passing loop 204 205 Label loop; 206 // Copy Java parameters in reverse order (receiver last) 207 // Note that the argument order is inverted in the process 208 // source is rdx[rcx: N-1..0] 209 // dest is rsp[rbx: 0..N-1] 210 211 __ movptr(rdx, parameters); // parameter pointer 212 __ xorptr(rbx, rbx); 213 214 __ BIND(loop); 215 216 // get parameter 217 __ movptr(rax, Address(rdx, rcx, Interpreter::stackElementScale(), -wordSize)); 218 __ movptr(Address(rsp, rbx, Interpreter::stackElementScale(), 219 Interpreter::expr_offset_in_bytes(0)), rax); // store parameter 220 __ increment(rbx); 221 __ decrement(rcx); 222 __ jcc(Assembler::notZero, loop); 223 224 // call Java function 225 __ BIND(parameters_done); 226 __ movptr(rbx, method); // get Method* 227 __ movptr(rax, entry_point); // get entry_point 228 __ mov(rsi, rsp); // set sender sp 229 BLOCK_COMMENT("call Java function"); 230 __ call(rax); 231 232 BLOCK_COMMENT("call_stub_return_address:"); 233 return_address = __ pc(); 234 235 #ifdef COMPILER2 236 { 237 Label L_skip; 238 if (UseSSE >= 2) { 239 __ verify_FPU(0, "call_stub_return"); 240 } else { 241 for (int i = 1; i < 8; i++) { 242 __ ffree(i); 243 } 244 245 // UseSSE <= 1 so double result should be left on TOS 246 __ movl(rsi, result_type); 247 __ cmpl(rsi, T_DOUBLE); 248 __ jcc(Assembler::equal, L_skip); 249 if (UseSSE == 0) { 250 // UseSSE == 0 so float result should be left on TOS 251 __ cmpl(rsi, T_FLOAT); 252 __ jcc(Assembler::equal, L_skip); 253 } 254 __ ffree(0); 255 } 256 __ BIND(L_skip); 257 } 258 #endif // COMPILER2 259 260 // store result depending on type 261 // (everything that is not T_LONG, T_FLOAT or T_DOUBLE is treated as T_INT) 262 __ movptr(rdi, result); 263 Label is_long, is_float, is_double, exit; 264 __ movl(rsi, result_type); 265 __ cmpl(rsi, T_LONG); 266 __ jcc(Assembler::equal, is_long); 267 __ cmpl(rsi, T_FLOAT); 268 __ jcc(Assembler::equal, is_float); 269 __ cmpl(rsi, T_DOUBLE); 270 __ jcc(Assembler::equal, is_double); 271 272 // handle T_INT case 273 __ movl(Address(rdi, 0), rax); 274 __ BIND(exit); 275 276 // check that FPU stack is empty 277 __ verify_FPU(0, "generate_call_stub"); 278 279 // pop parameters 280 __ lea(rsp, rsp_after_call); 281 282 // restore %mxcsr 283 if (sse_save) { 284 __ ldmxcsr(mxcsr_save); 285 } 286 287 // restore rdi, rsi and rbx, 288 __ movptr(rbx, saved_rbx); 289 __ movptr(rsi, saved_rsi); 290 __ movptr(rdi, saved_rdi); 291 __ addptr(rsp, 4*wordSize); 292 293 // return 294 __ pop(rbp); 295 __ ret(0); 296 297 // handle return types different from T_INT 298 __ BIND(is_long); 299 __ movl(Address(rdi, 0 * wordSize), rax); 300 __ movl(Address(rdi, 1 * wordSize), rdx); 301 __ jmp(exit); 302 303 __ BIND(is_float); 304 // interpreter uses xmm0 for return values 305 if (UseSSE >= 1) { 306 __ movflt(Address(rdi, 0), xmm0); 307 } else { 308 __ fstp_s(Address(rdi, 0)); 309 } 310 __ jmp(exit); 311 312 __ BIND(is_double); 313 // interpreter uses xmm0 for return values 314 if (UseSSE >= 2) { 315 __ movdbl(Address(rdi, 0), xmm0); 316 } else { 317 __ fstp_d(Address(rdi, 0)); 318 } 319 __ jmp(exit); 320 321 return start; 322 } 323 324 325 //------------------------------------------------------------------------------------------------------------------------ 326 // Return point for a Java call if there's an exception thrown in Java code. 327 // The exception is caught and transformed into a pending exception stored in 328 // JavaThread that can be tested from within the VM. 329 // 330 // Note: Usually the parameters are removed by the callee. In case of an exception 331 // crossing an activation frame boundary, that is not the case if the callee 332 // is compiled code => need to setup the rsp. 333 // 334 // rax,: exception oop 335 336 address generate_catch_exception() { 337 StubCodeMark mark(this, "StubRoutines", "catch_exception"); 338 const Address rsp_after_call(rbp, -4 * wordSize); // same as in generate_call_stub()! 339 const Address thread (rbp, 9 * wordSize); // same as in generate_call_stub()! 340 address start = __ pc(); 341 342 // get thread directly 343 __ movptr(rcx, thread); 344 #ifdef ASSERT 345 // verify that threads correspond 346 { Label L; 347 __ get_thread(rbx); 348 __ cmpptr(rbx, rcx); 349 __ jcc(Assembler::equal, L); 350 __ stop("StubRoutines::catch_exception: threads must correspond"); 351 __ bind(L); 352 } 353 #endif 354 // set pending exception 355 __ verify_oop(rax); 356 __ movptr(Address(rcx, Thread::pending_exception_offset()), rax ); 357 __ lea(Address(rcx, Thread::exception_file_offset ()), 358 ExternalAddress((address)__FILE__)); 359 __ movl(Address(rcx, Thread::exception_line_offset ()), __LINE__ ); 360 // complete return to VM 361 assert(StubRoutines::_call_stub_return_address != NULL, "_call_stub_return_address must have been generated before"); 362 __ jump(RuntimeAddress(StubRoutines::_call_stub_return_address)); 363 364 return start; 365 } 366 367 368 //------------------------------------------------------------------------------------------------------------------------ 369 // Continuation point for runtime calls returning with a pending exception. 370 // The pending exception check happened in the runtime or native call stub. 371 // The pending exception in Thread is converted into a Java-level exception. 372 // 373 // Contract with Java-level exception handlers: 374 // rax: exception 375 // rdx: throwing pc 376 // 377 // NOTE: At entry of this stub, exception-pc must be on stack !! 378 379 address generate_forward_exception() { 380 StubCodeMark mark(this, "StubRoutines", "forward exception"); 381 address start = __ pc(); 382 const Register thread = rcx; 383 384 // other registers used in this stub 385 const Register exception_oop = rax; 386 const Register handler_addr = rbx; 387 const Register exception_pc = rdx; 388 389 // Upon entry, the sp points to the return address returning into Java 390 // (interpreted or compiled) code; i.e., the return address becomes the 391 // throwing pc. 392 // 393 // Arguments pushed before the runtime call are still on the stack but 394 // the exception handler will reset the stack pointer -> ignore them. 395 // A potential result in registers can be ignored as well. 396 397 #ifdef ASSERT 398 // make sure this code is only executed if there is a pending exception 399 { Label L; 400 __ get_thread(thread); 401 __ cmpptr(Address(thread, Thread::pending_exception_offset()), (int32_t)NULL_WORD); 402 __ jcc(Assembler::notEqual, L); 403 __ stop("StubRoutines::forward exception: no pending exception (1)"); 404 __ bind(L); 405 } 406 #endif 407 408 // compute exception handler into rbx, 409 __ get_thread(thread); 410 __ movptr(exception_pc, Address(rsp, 0)); 411 BLOCK_COMMENT("call exception_handler_for_return_address"); 412 __ call_VM_leaf(CAST_FROM_FN_PTR(address, SharedRuntime::exception_handler_for_return_address), thread, exception_pc); 413 __ mov(handler_addr, rax); 414 415 // setup rax & rdx, remove return address & clear pending exception 416 __ get_thread(thread); 417 __ pop(exception_pc); 418 __ movptr(exception_oop, Address(thread, Thread::pending_exception_offset())); 419 __ movptr(Address(thread, Thread::pending_exception_offset()), NULL_WORD); 420 421 #ifdef ASSERT 422 // make sure exception is set 423 { Label L; 424 __ testptr(exception_oop, exception_oop); 425 __ jcc(Assembler::notEqual, L); 426 __ stop("StubRoutines::forward exception: no pending exception (2)"); 427 __ bind(L); 428 } 429 #endif 430 431 // Verify that there is really a valid exception in RAX. 432 __ verify_oop(exception_oop); 433 434 // continue at exception handler (return address removed) 435 // rax: exception 436 // rbx: exception handler 437 // rdx: throwing pc 438 __ jmp(handler_addr); 439 440 return start; 441 } 442 443 444 //---------------------------------------------------------------------------------------------------- 445 // Support for jint Atomic::xchg(jint exchange_value, volatile jint* dest) 446 // 447 // xchg exists as far back as 8086, lock needed for MP only 448 // Stack layout immediately after call: 449 // 450 // 0 [ret addr ] <--- rsp 451 // 1 [ ex ] 452 // 2 [ dest ] 453 // 454 // Result: *dest <- ex, return (old *dest) 455 // 456 // Note: win32 does not currently use this code 457 458 address generate_atomic_xchg() { 459 StubCodeMark mark(this, "StubRoutines", "atomic_xchg"); 460 address start = __ pc(); 461 462 __ push(rdx); 463 Address exchange(rsp, 2 * wordSize); 464 Address dest_addr(rsp, 3 * wordSize); 465 __ movl(rax, exchange); 466 __ movptr(rdx, dest_addr); 467 __ xchgl(rax, Address(rdx, 0)); 468 __ pop(rdx); 469 __ ret(0); 470 471 return start; 472 } 473 474 //---------------------------------------------------------------------------------------------------- 475 // Support for void verify_mxcsr() 476 // 477 // This routine is used with -Xcheck:jni to verify that native 478 // JNI code does not return to Java code without restoring the 479 // MXCSR register to our expected state. 480 481 482 address generate_verify_mxcsr() { 483 StubCodeMark mark(this, "StubRoutines", "verify_mxcsr"); 484 address start = __ pc(); 485 486 const Address mxcsr_save(rsp, 0); 487 488 if (CheckJNICalls && UseSSE > 0 ) { 489 Label ok_ret; 490 ExternalAddress mxcsr_std(StubRoutines::addr_mxcsr_std()); 491 __ push(rax); 492 __ subptr(rsp, wordSize); // allocate a temp location 493 __ stmxcsr(mxcsr_save); 494 __ movl(rax, mxcsr_save); 495 __ andl(rax, MXCSR_MASK); 496 __ cmp32(rax, mxcsr_std); 497 __ jcc(Assembler::equal, ok_ret); 498 499 __ warn("MXCSR changed by native JNI code."); 500 501 __ ldmxcsr(mxcsr_std); 502 503 __ bind(ok_ret); 504 __ addptr(rsp, wordSize); 505 __ pop(rax); 506 } 507 508 __ ret(0); 509 510 return start; 511 } 512 513 514 //--------------------------------------------------------------------------- 515 // Support for void verify_fpu_cntrl_wrd() 516 // 517 // This routine is used with -Xcheck:jni to verify that native 518 // JNI code does not return to Java code without restoring the 519 // FP control word to our expected state. 520 521 address generate_verify_fpu_cntrl_wrd() { 522 StubCodeMark mark(this, "StubRoutines", "verify_spcw"); 523 address start = __ pc(); 524 525 const Address fpu_cntrl_wrd_save(rsp, 0); 526 527 if (CheckJNICalls) { 528 Label ok_ret; 529 __ push(rax); 530 __ subptr(rsp, wordSize); // allocate a temp location 531 __ fnstcw(fpu_cntrl_wrd_save); 532 __ movl(rax, fpu_cntrl_wrd_save); 533 __ andl(rax, FPU_CNTRL_WRD_MASK); 534 ExternalAddress fpu_std(StubRoutines::addr_fpu_cntrl_wrd_std()); 535 __ cmp32(rax, fpu_std); 536 __ jcc(Assembler::equal, ok_ret); 537 538 __ warn("Floating point control word changed by native JNI code."); 539 540 __ fldcw(fpu_std); 541 542 __ bind(ok_ret); 543 __ addptr(rsp, wordSize); 544 __ pop(rax); 545 } 546 547 __ ret(0); 548 549 return start; 550 } 551 552 //--------------------------------------------------------------------------- 553 // Wrapper for slow-case handling of double-to-integer conversion 554 // d2i or f2i fast case failed either because it is nan or because 555 // of under/overflow. 556 // Input: FPU TOS: float value 557 // Output: rax, (rdx): integer (long) result 558 559 address generate_d2i_wrapper(BasicType t, address fcn) { 560 StubCodeMark mark(this, "StubRoutines", "d2i_wrapper"); 561 address start = __ pc(); 562 563 // Capture info about frame layout 564 enum layout { FPUState_off = 0, 565 rbp_off = FPUStateSizeInWords, 566 rdi_off, 567 rsi_off, 568 rcx_off, 569 rbx_off, 570 saved_argument_off, 571 saved_argument_off2, // 2nd half of double 572 framesize 573 }; 574 575 assert(FPUStateSizeInWords == 27, "update stack layout"); 576 577 // Save outgoing argument to stack across push_FPU_state() 578 __ subptr(rsp, wordSize * 2); 579 __ fstp_d(Address(rsp, 0)); 580 581 // Save CPU & FPU state 582 __ push(rbx); 583 __ push(rcx); 584 __ push(rsi); 585 __ push(rdi); 586 __ push(rbp); 587 __ push_FPU_state(); 588 589 // push_FPU_state() resets the FP top of stack 590 // Load original double into FP top of stack 591 __ fld_d(Address(rsp, saved_argument_off * wordSize)); 592 // Store double into stack as outgoing argument 593 __ subptr(rsp, wordSize*2); 594 __ fst_d(Address(rsp, 0)); 595 596 // Prepare FPU for doing math in C-land 597 __ empty_FPU_stack(); 598 // Call the C code to massage the double. Result in EAX 599 if (t == T_INT) 600 { BLOCK_COMMENT("SharedRuntime::d2i"); } 601 else if (t == T_LONG) 602 { BLOCK_COMMENT("SharedRuntime::d2l"); } 603 __ call_VM_leaf( fcn, 2 ); 604 605 // Restore CPU & FPU state 606 __ pop_FPU_state(); 607 __ pop(rbp); 608 __ pop(rdi); 609 __ pop(rsi); 610 __ pop(rcx); 611 __ pop(rbx); 612 __ addptr(rsp, wordSize * 2); 613 614 __ ret(0); 615 616 return start; 617 } 618 619 620 //--------------------------------------------------------------------------- 621 // The following routine generates a subroutine to throw an asynchronous 622 // UnknownError when an unsafe access gets a fault that could not be 623 // reasonably prevented by the programmer. (Example: SIGBUS/OBJERR.) 624 address generate_handler_for_unsafe_access() { 625 StubCodeMark mark(this, "StubRoutines", "handler_for_unsafe_access"); 626 address start = __ pc(); 627 628 __ push(0); // hole for return address-to-be 629 __ pusha(); // push registers 630 Address next_pc(rsp, RegisterImpl::number_of_registers * BytesPerWord); 631 BLOCK_COMMENT("call handle_unsafe_access"); 632 __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, handle_unsafe_access))); 633 __ movptr(next_pc, rax); // stuff next address 634 __ popa(); 635 __ ret(0); // jump to next address 636 637 return start; 638 } 639 640 641 //---------------------------------------------------------------------------------------------------- 642 // Non-destructive plausibility checks for oops 643 644 address generate_verify_oop() { 645 StubCodeMark mark(this, "StubRoutines", "verify_oop"); 646 address start = __ pc(); 647 648 // Incoming arguments on stack after saving rax,: 649 // 650 // [tos ]: saved rdx 651 // [tos + 1]: saved EFLAGS 652 // [tos + 2]: return address 653 // [tos + 3]: char* error message 654 // [tos + 4]: oop object to verify 655 // [tos + 5]: saved rax, - saved by caller and bashed 656 657 Label exit, error; 658 __ pushf(); 659 __ incrementl(ExternalAddress((address) StubRoutines::verify_oop_count_addr())); 660 __ push(rdx); // save rdx 661 // make sure object is 'reasonable' 662 __ movptr(rax, Address(rsp, 4 * wordSize)); // get object 663 __ testptr(rax, rax); 664 __ jcc(Assembler::zero, exit); // if obj is NULL it is ok 665 666 // Check if the oop is in the right area of memory 667 const int oop_mask = Universe::verify_oop_mask(); 668 const int oop_bits = Universe::verify_oop_bits(); 669 __ mov(rdx, rax); 670 __ andptr(rdx, oop_mask); 671 __ cmpptr(rdx, oop_bits); 672 __ jcc(Assembler::notZero, error); 673 674 // make sure klass is 'reasonable', which is not zero. 675 __ movptr(rax, Address(rax, oopDesc::klass_offset_in_bytes())); // get klass 676 __ testptr(rax, rax); 677 __ jcc(Assembler::zero, error); // if klass is NULL it is broken 678 // TODO: Future assert that klass is lower 4g memory for UseCompressedKlassPointers 679 680 // return if everything seems ok 681 __ bind(exit); 682 __ movptr(rax, Address(rsp, 5 * wordSize)); // get saved rax, back 683 __ pop(rdx); // restore rdx 684 __ popf(); // restore EFLAGS 685 __ ret(3 * wordSize); // pop arguments 686 687 // handle errors 688 __ bind(error); 689 __ movptr(rax, Address(rsp, 5 * wordSize)); // get saved rax, back 690 __ pop(rdx); // get saved rdx back 691 __ popf(); // get saved EFLAGS off stack -- will be ignored 692 __ pusha(); // push registers (eip = return address & msg are already pushed) 693 BLOCK_COMMENT("call MacroAssembler::debug"); 694 __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, MacroAssembler::debug32))); 695 __ popa(); 696 __ ret(3 * wordSize); // pop arguments 697 return start; 698 } 699 700 // 701 // Generate pre-barrier for array stores 702 // 703 // Input: 704 // start - starting address 705 // count - element count 706 void gen_write_ref_array_pre_barrier(Register start, Register count, bool uninitialized_target) { 707 assert_different_registers(start, count); 708 BarrierSet* bs = Universe::heap()->barrier_set(); 709 switch (bs->kind()) { 710 case BarrierSet::G1SATBCT: 711 case BarrierSet::G1SATBCTLogging: 712 // With G1, don't generate the call if we statically know that the target in uninitialized 713 if (!uninitialized_target) { 714 __ pusha(); // push registers 715 __ call_VM_leaf(CAST_FROM_FN_PTR(address, BarrierSet::static_write_ref_array_pre), 716 start, count); 717 __ popa(); 718 } 719 break; 720 case BarrierSet::CardTableModRef: 721 case BarrierSet::CardTableExtension: 722 case BarrierSet::ModRef: 723 break; 724 default : 725 ShouldNotReachHere(); 726 727 } 728 } 729 730 731 // 732 // Generate a post-barrier for an array store 733 // 734 // start - starting address 735 // count - element count 736 // 737 // The two input registers are overwritten. 738 // 739 void gen_write_ref_array_post_barrier(Register start, Register count) { 740 BarrierSet* bs = Universe::heap()->barrier_set(); 741 assert_different_registers(start, count); 742 switch (bs->kind()) { 743 case BarrierSet::G1SATBCT: 744 case BarrierSet::G1SATBCTLogging: 745 { 746 __ pusha(); // push registers 747 __ call_VM_leaf(CAST_FROM_FN_PTR(address, BarrierSet::static_write_ref_array_post), 748 start, count); 749 __ popa(); 750 } 751 break; 752 753 case BarrierSet::CardTableModRef: 754 case BarrierSet::CardTableExtension: 755 { 756 CardTableModRefBS* ct = (CardTableModRefBS*)bs; 757 assert(sizeof(*ct->byte_map_base) == sizeof(jbyte), "adjust this code"); 758 759 Label L_loop; 760 const Register end = count; // elements count; end == start+count-1 761 assert_different_registers(start, end); 762 763 __ lea(end, Address(start, count, Address::times_ptr, -wordSize)); 764 __ shrptr(start, CardTableModRefBS::card_shift); 765 __ shrptr(end, CardTableModRefBS::card_shift); 766 __ subptr(end, start); // end --> count 767 __ BIND(L_loop); 768 intptr_t disp = (intptr_t) ct->byte_map_base; 769 Address cardtable(start, count, Address::times_1, disp); 770 __ movb(cardtable, 0); 771 __ decrement(count); 772 __ jcc(Assembler::greaterEqual, L_loop); 773 } 774 break; 775 case BarrierSet::ModRef: 776 break; 777 default : 778 ShouldNotReachHere(); 779 780 } 781 } 782 783 784 // Copy 64 bytes chunks 785 // 786 // Inputs: 787 // from - source array address 788 // to_from - destination array address - from 789 // qword_count - 8-bytes element count, negative 790 // 791 void xmm_copy_forward(Register from, Register to_from, Register qword_count) { 792 assert( UseSSE >= 2, "supported cpu only" ); 793 Label L_copy_64_bytes_loop, L_copy_64_bytes, L_copy_8_bytes, L_exit; 794 // Copy 64-byte chunks 795 __ jmpb(L_copy_64_bytes); 796 __ align(OptoLoopAlignment); 797 __ BIND(L_copy_64_bytes_loop); 798 799 if(UseUnalignedLoadStores) { 800 __ movdqu(xmm0, Address(from, 0)); 801 __ movdqu(Address(from, to_from, Address::times_1, 0), xmm0); 802 __ movdqu(xmm1, Address(from, 16)); 803 __ movdqu(Address(from, to_from, Address::times_1, 16), xmm1); 804 __ movdqu(xmm2, Address(from, 32)); 805 __ movdqu(Address(from, to_from, Address::times_1, 32), xmm2); 806 __ movdqu(xmm3, Address(from, 48)); 807 __ movdqu(Address(from, to_from, Address::times_1, 48), xmm3); 808 809 } else { 810 __ movq(xmm0, Address(from, 0)); 811 __ movq(Address(from, to_from, Address::times_1, 0), xmm0); 812 __ movq(xmm1, Address(from, 8)); 813 __ movq(Address(from, to_from, Address::times_1, 8), xmm1); 814 __ movq(xmm2, Address(from, 16)); 815 __ movq(Address(from, to_from, Address::times_1, 16), xmm2); 816 __ movq(xmm3, Address(from, 24)); 817 __ movq(Address(from, to_from, Address::times_1, 24), xmm3); 818 __ movq(xmm4, Address(from, 32)); 819 __ movq(Address(from, to_from, Address::times_1, 32), xmm4); 820 __ movq(xmm5, Address(from, 40)); 821 __ movq(Address(from, to_from, Address::times_1, 40), xmm5); 822 __ movq(xmm6, Address(from, 48)); 823 __ movq(Address(from, to_from, Address::times_1, 48), xmm6); 824 __ movq(xmm7, Address(from, 56)); 825 __ movq(Address(from, to_from, Address::times_1, 56), xmm7); 826 } 827 828 __ addl(from, 64); 829 __ BIND(L_copy_64_bytes); 830 __ subl(qword_count, 8); 831 __ jcc(Assembler::greaterEqual, L_copy_64_bytes_loop); 832 __ addl(qword_count, 8); 833 __ jccb(Assembler::zero, L_exit); 834 // 835 // length is too short, just copy qwords 836 // 837 __ BIND(L_copy_8_bytes); 838 __ movq(xmm0, Address(from, 0)); 839 __ movq(Address(from, to_from, Address::times_1), xmm0); 840 __ addl(from, 8); 841 __ decrement(qword_count); 842 __ jcc(Assembler::greater, L_copy_8_bytes); 843 __ BIND(L_exit); 844 } 845 846 // Copy 64 bytes chunks 847 // 848 // Inputs: 849 // from - source array address 850 // to_from - destination array address - from 851 // qword_count - 8-bytes element count, negative 852 // 853 void mmx_copy_forward(Register from, Register to_from, Register qword_count) { 854 assert( VM_Version::supports_mmx(), "supported cpu only" ); 855 Label L_copy_64_bytes_loop, L_copy_64_bytes, L_copy_8_bytes, L_exit; 856 // Copy 64-byte chunks 857 __ jmpb(L_copy_64_bytes); 858 __ align(OptoLoopAlignment); 859 __ BIND(L_copy_64_bytes_loop); 860 __ movq(mmx0, Address(from, 0)); 861 __ movq(mmx1, Address(from, 8)); 862 __ movq(mmx2, Address(from, 16)); 863 __ movq(Address(from, to_from, Address::times_1, 0), mmx0); 864 __ movq(mmx3, Address(from, 24)); 865 __ movq(Address(from, to_from, Address::times_1, 8), mmx1); 866 __ movq(mmx4, Address(from, 32)); 867 __ movq(Address(from, to_from, Address::times_1, 16), mmx2); 868 __ movq(mmx5, Address(from, 40)); 869 __ movq(Address(from, to_from, Address::times_1, 24), mmx3); 870 __ movq(mmx6, Address(from, 48)); 871 __ movq(Address(from, to_from, Address::times_1, 32), mmx4); 872 __ movq(mmx7, Address(from, 56)); 873 __ movq(Address(from, to_from, Address::times_1, 40), mmx5); 874 __ movq(Address(from, to_from, Address::times_1, 48), mmx6); 875 __ movq(Address(from, to_from, Address::times_1, 56), mmx7); 876 __ addptr(from, 64); 877 __ BIND(L_copy_64_bytes); 878 __ subl(qword_count, 8); 879 __ jcc(Assembler::greaterEqual, L_copy_64_bytes_loop); 880 __ addl(qword_count, 8); 881 __ jccb(Assembler::zero, L_exit); 882 // 883 // length is too short, just copy qwords 884 // 885 __ BIND(L_copy_8_bytes); 886 __ movq(mmx0, Address(from, 0)); 887 __ movq(Address(from, to_from, Address::times_1), mmx0); 888 __ addptr(from, 8); 889 __ decrement(qword_count); 890 __ jcc(Assembler::greater, L_copy_8_bytes); 891 __ BIND(L_exit); 892 __ emms(); 893 } 894 895 address generate_disjoint_copy(BasicType t, bool aligned, 896 Address::ScaleFactor sf, 897 address* entry, const char *name, 898 bool dest_uninitialized = false) { 899 __ align(CodeEntryAlignment); 900 StubCodeMark mark(this, "StubRoutines", name); 901 address start = __ pc(); 902 903 Label L_0_count, L_exit, L_skip_align1, L_skip_align2, L_copy_byte; 904 Label L_copy_2_bytes, L_copy_4_bytes, L_copy_64_bytes; 905 906 int shift = Address::times_ptr - sf; 907 908 const Register from = rsi; // source array address 909 const Register to = rdi; // destination array address 910 const Register count = rcx; // elements count 911 const Register to_from = to; // (to - from) 912 const Register saved_to = rdx; // saved destination array address 913 914 __ enter(); // required for proper stackwalking of RuntimeStub frame 915 __ push(rsi); 916 __ push(rdi); 917 __ movptr(from , Address(rsp, 12+ 4)); 918 __ movptr(to , Address(rsp, 12+ 8)); 919 __ movl(count, Address(rsp, 12+ 12)); 920 921 if (entry != NULL) { 922 *entry = __ pc(); // Entry point from conjoint arraycopy stub. 923 BLOCK_COMMENT("Entry:"); 924 } 925 926 if (t == T_OBJECT) { 927 __ testl(count, count); 928 __ jcc(Assembler::zero, L_0_count); 929 gen_write_ref_array_pre_barrier(to, count, dest_uninitialized); 930 __ mov(saved_to, to); // save 'to' 931 } 932 933 __ subptr(to, from); // to --> to_from 934 __ cmpl(count, 2<<shift); // Short arrays (< 8 bytes) copy by element 935 __ jcc(Assembler::below, L_copy_4_bytes); // use unsigned cmp 936 if (!UseUnalignedLoadStores && !aligned && (t == T_BYTE || t == T_SHORT)) { 937 // align source address at 4 bytes address boundary 938 if (t == T_BYTE) { 939 // One byte misalignment happens only for byte arrays 940 __ testl(from, 1); 941 __ jccb(Assembler::zero, L_skip_align1); 942 __ movb(rax, Address(from, 0)); 943 __ movb(Address(from, to_from, Address::times_1, 0), rax); 944 __ increment(from); 945 __ decrement(count); 946 __ BIND(L_skip_align1); 947 } 948 // Two bytes misalignment happens only for byte and short (char) arrays 949 __ testl(from, 2); 950 __ jccb(Assembler::zero, L_skip_align2); 951 __ movw(rax, Address(from, 0)); 952 __ movw(Address(from, to_from, Address::times_1, 0), rax); 953 __ addptr(from, 2); 954 __ subl(count, 1<<(shift-1)); 955 __ BIND(L_skip_align2); 956 } 957 if (!VM_Version::supports_mmx()) { 958 __ mov(rax, count); // save 'count' 959 __ shrl(count, shift); // bytes count 960 __ addptr(to_from, from);// restore 'to' 961 __ rep_mov(); 962 __ subptr(to_from, from);// restore 'to_from' 963 __ mov(count, rax); // restore 'count' 964 __ jmpb(L_copy_2_bytes); // all dwords were copied 965 } else { 966 if (!UseUnalignedLoadStores) { 967 // align to 8 bytes, we know we are 4 byte aligned to start 968 __ testptr(from, 4); 969 __ jccb(Assembler::zero, L_copy_64_bytes); 970 __ movl(rax, Address(from, 0)); 971 __ movl(Address(from, to_from, Address::times_1, 0), rax); 972 __ addptr(from, 4); 973 __ subl(count, 1<<shift); 974 } 975 __ BIND(L_copy_64_bytes); 976 __ mov(rax, count); 977 __ shrl(rax, shift+1); // 8 bytes chunk count 978 // 979 // Copy 8-byte chunks through MMX registers, 8 per iteration of the loop 980 // 981 if (UseXMMForArrayCopy) { 982 xmm_copy_forward(from, to_from, rax); 983 } else { 984 mmx_copy_forward(from, to_from, rax); 985 } 986 } 987 // copy tailing dword 988 __ BIND(L_copy_4_bytes); 989 __ testl(count, 1<<shift); 990 __ jccb(Assembler::zero, L_copy_2_bytes); 991 __ movl(rax, Address(from, 0)); 992 __ movl(Address(from, to_from, Address::times_1, 0), rax); 993 if (t == T_BYTE || t == T_SHORT) { 994 __ addptr(from, 4); 995 __ BIND(L_copy_2_bytes); 996 // copy tailing word 997 __ testl(count, 1<<(shift-1)); 998 __ jccb(Assembler::zero, L_copy_byte); 999 __ movw(rax, Address(from, 0)); 1000 __ movw(Address(from, to_from, Address::times_1, 0), rax); 1001 if (t == T_BYTE) { 1002 __ addptr(from, 2); 1003 __ BIND(L_copy_byte); 1004 // copy tailing byte 1005 __ testl(count, 1); 1006 __ jccb(Assembler::zero, L_exit); 1007 __ movb(rax, Address(from, 0)); 1008 __ movb(Address(from, to_from, Address::times_1, 0), rax); 1009 __ BIND(L_exit); 1010 } else { 1011 __ BIND(L_copy_byte); 1012 } 1013 } else { 1014 __ BIND(L_copy_2_bytes); 1015 } 1016 1017 if (t == T_OBJECT) { 1018 __ movl(count, Address(rsp, 12+12)); // reread 'count' 1019 __ mov(to, saved_to); // restore 'to' 1020 gen_write_ref_array_post_barrier(to, count); 1021 __ BIND(L_0_count); 1022 } 1023 inc_copy_counter_np(t); 1024 __ pop(rdi); 1025 __ pop(rsi); 1026 __ leave(); // required for proper stackwalking of RuntimeStub frame 1027 __ xorptr(rax, rax); // return 0 1028 __ ret(0); 1029 return start; 1030 } 1031 1032 1033 address generate_fill(BasicType t, bool aligned, const char *name) { 1034 __ align(CodeEntryAlignment); 1035 StubCodeMark mark(this, "StubRoutines", name); 1036 address start = __ pc(); 1037 1038 BLOCK_COMMENT("Entry:"); 1039 1040 const Register to = rdi; // source array address 1041 const Register value = rdx; // value 1042 const Register count = rsi; // elements count 1043 1044 __ enter(); // required for proper stackwalking of RuntimeStub frame 1045 __ push(rsi); 1046 __ push(rdi); 1047 __ movptr(to , Address(rsp, 12+ 4)); 1048 __ movl(value, Address(rsp, 12+ 8)); 1049 __ movl(count, Address(rsp, 12+ 12)); 1050 1051 __ generate_fill(t, aligned, to, value, count, rax, xmm0); 1052 1053 __ pop(rdi); 1054 __ pop(rsi); 1055 __ leave(); // required for proper stackwalking of RuntimeStub frame 1056 __ ret(0); 1057 return start; 1058 } 1059 1060 address generate_conjoint_copy(BasicType t, bool aligned, 1061 Address::ScaleFactor sf, 1062 address nooverlap_target, 1063 address* entry, const char *name, 1064 bool dest_uninitialized = false) { 1065 __ align(CodeEntryAlignment); 1066 StubCodeMark mark(this, "StubRoutines", name); 1067 address start = __ pc(); 1068 1069 Label L_0_count, L_exit, L_skip_align1, L_skip_align2, L_copy_byte; 1070 Label L_copy_2_bytes, L_copy_4_bytes, L_copy_8_bytes, L_copy_8_bytes_loop; 1071 1072 int shift = Address::times_ptr - sf; 1073 1074 const Register src = rax; // source array address 1075 const Register dst = rdx; // destination array address 1076 const Register from = rsi; // source array address 1077 const Register to = rdi; // destination array address 1078 const Register count = rcx; // elements count 1079 const Register end = rax; // array end address 1080 1081 __ enter(); // required for proper stackwalking of RuntimeStub frame 1082 __ push(rsi); 1083 __ push(rdi); 1084 __ movptr(src , Address(rsp, 12+ 4)); // from 1085 __ movptr(dst , Address(rsp, 12+ 8)); // to 1086 __ movl2ptr(count, Address(rsp, 12+12)); // count 1087 1088 if (entry != NULL) { 1089 *entry = __ pc(); // Entry point from generic arraycopy stub. 1090 BLOCK_COMMENT("Entry:"); 1091 } 1092 1093 // nooverlap_target expects arguments in rsi and rdi. 1094 __ mov(from, src); 1095 __ mov(to , dst); 1096 1097 // arrays overlap test: dispatch to disjoint stub if necessary. 1098 RuntimeAddress nooverlap(nooverlap_target); 1099 __ cmpptr(dst, src); 1100 __ lea(end, Address(src, count, sf, 0)); // src + count * elem_size 1101 __ jump_cc(Assembler::belowEqual, nooverlap); 1102 __ cmpptr(dst, end); 1103 __ jump_cc(Assembler::aboveEqual, nooverlap); 1104 1105 if (t == T_OBJECT) { 1106 __ testl(count, count); 1107 __ jcc(Assembler::zero, L_0_count); 1108 gen_write_ref_array_pre_barrier(dst, count, dest_uninitialized); 1109 } 1110 1111 // copy from high to low 1112 __ cmpl(count, 2<<shift); // Short arrays (< 8 bytes) copy by element 1113 __ jcc(Assembler::below, L_copy_4_bytes); // use unsigned cmp 1114 if (t == T_BYTE || t == T_SHORT) { 1115 // Align the end of destination array at 4 bytes address boundary 1116 __ lea(end, Address(dst, count, sf, 0)); 1117 if (t == T_BYTE) { 1118 // One byte misalignment happens only for byte arrays 1119 __ testl(end, 1); 1120 __ jccb(Assembler::zero, L_skip_align1); 1121 __ decrement(count); 1122 __ movb(rdx, Address(from, count, sf, 0)); 1123 __ movb(Address(to, count, sf, 0), rdx); 1124 __ BIND(L_skip_align1); 1125 } 1126 // Two bytes misalignment happens only for byte and short (char) arrays 1127 __ testl(end, 2); 1128 __ jccb(Assembler::zero, L_skip_align2); 1129 __ subptr(count, 1<<(shift-1)); 1130 __ movw(rdx, Address(from, count, sf, 0)); 1131 __ movw(Address(to, count, sf, 0), rdx); 1132 __ BIND(L_skip_align2); 1133 __ cmpl(count, 2<<shift); // Short arrays (< 8 bytes) copy by element 1134 __ jcc(Assembler::below, L_copy_4_bytes); 1135 } 1136 1137 if (!VM_Version::supports_mmx()) { 1138 __ std(); 1139 __ mov(rax, count); // Save 'count' 1140 __ mov(rdx, to); // Save 'to' 1141 __ lea(rsi, Address(from, count, sf, -4)); 1142 __ lea(rdi, Address(to , count, sf, -4)); 1143 __ shrptr(count, shift); // bytes count 1144 __ rep_mov(); 1145 __ cld(); 1146 __ mov(count, rax); // restore 'count' 1147 __ andl(count, (1<<shift)-1); // mask the number of rest elements 1148 __ movptr(from, Address(rsp, 12+4)); // reread 'from' 1149 __ mov(to, rdx); // restore 'to' 1150 __ jmpb(L_copy_2_bytes); // all dword were copied 1151 } else { 1152 // Align to 8 bytes the end of array. It is aligned to 4 bytes already. 1153 __ testptr(end, 4); 1154 __ jccb(Assembler::zero, L_copy_8_bytes); 1155 __ subl(count, 1<<shift); 1156 __ movl(rdx, Address(from, count, sf, 0)); 1157 __ movl(Address(to, count, sf, 0), rdx); 1158 __ jmpb(L_copy_8_bytes); 1159 1160 __ align(OptoLoopAlignment); 1161 // Move 8 bytes 1162 __ BIND(L_copy_8_bytes_loop); 1163 if (UseXMMForArrayCopy) { 1164 __ movq(xmm0, Address(from, count, sf, 0)); 1165 __ movq(Address(to, count, sf, 0), xmm0); 1166 } else { 1167 __ movq(mmx0, Address(from, count, sf, 0)); 1168 __ movq(Address(to, count, sf, 0), mmx0); 1169 } 1170 __ BIND(L_copy_8_bytes); 1171 __ subl(count, 2<<shift); 1172 __ jcc(Assembler::greaterEqual, L_copy_8_bytes_loop); 1173 __ addl(count, 2<<shift); 1174 if (!UseXMMForArrayCopy) { 1175 __ emms(); 1176 } 1177 } 1178 __ BIND(L_copy_4_bytes); 1179 // copy prefix qword 1180 __ testl(count, 1<<shift); 1181 __ jccb(Assembler::zero, L_copy_2_bytes); 1182 __ movl(rdx, Address(from, count, sf, -4)); 1183 __ movl(Address(to, count, sf, -4), rdx); 1184 1185 if (t == T_BYTE || t == T_SHORT) { 1186 __ subl(count, (1<<shift)); 1187 __ BIND(L_copy_2_bytes); 1188 // copy prefix dword 1189 __ testl(count, 1<<(shift-1)); 1190 __ jccb(Assembler::zero, L_copy_byte); 1191 __ movw(rdx, Address(from, count, sf, -2)); 1192 __ movw(Address(to, count, sf, -2), rdx); 1193 if (t == T_BYTE) { 1194 __ subl(count, 1<<(shift-1)); 1195 __ BIND(L_copy_byte); 1196 // copy prefix byte 1197 __ testl(count, 1); 1198 __ jccb(Assembler::zero, L_exit); 1199 __ movb(rdx, Address(from, 0)); 1200 __ movb(Address(to, 0), rdx); 1201 __ BIND(L_exit); 1202 } else { 1203 __ BIND(L_copy_byte); 1204 } 1205 } else { 1206 __ BIND(L_copy_2_bytes); 1207 } 1208 if (t == T_OBJECT) { 1209 __ movl2ptr(count, Address(rsp, 12+12)); // reread count 1210 gen_write_ref_array_post_barrier(to, count); 1211 __ BIND(L_0_count); 1212 } 1213 inc_copy_counter_np(t); 1214 __ pop(rdi); 1215 __ pop(rsi); 1216 __ leave(); // required for proper stackwalking of RuntimeStub frame 1217 __ xorptr(rax, rax); // return 0 1218 __ ret(0); 1219 return start; 1220 } 1221 1222 1223 address generate_disjoint_long_copy(address* entry, const char *name) { 1224 __ align(CodeEntryAlignment); 1225 StubCodeMark mark(this, "StubRoutines", name); 1226 address start = __ pc(); 1227 1228 Label L_copy_8_bytes, L_copy_8_bytes_loop; 1229 const Register from = rax; // source array address 1230 const Register to = rdx; // destination array address 1231 const Register count = rcx; // elements count 1232 const Register to_from = rdx; // (to - from) 1233 1234 __ enter(); // required for proper stackwalking of RuntimeStub frame 1235 __ movptr(from , Address(rsp, 8+0)); // from 1236 __ movptr(to , Address(rsp, 8+4)); // to 1237 __ movl2ptr(count, Address(rsp, 8+8)); // count 1238 1239 *entry = __ pc(); // Entry point from conjoint arraycopy stub. 1240 BLOCK_COMMENT("Entry:"); 1241 1242 __ subptr(to, from); // to --> to_from 1243 if (VM_Version::supports_mmx()) { 1244 if (UseXMMForArrayCopy) { 1245 xmm_copy_forward(from, to_from, count); 1246 } else { 1247 mmx_copy_forward(from, to_from, count); 1248 } 1249 } else { 1250 __ jmpb(L_copy_8_bytes); 1251 __ align(OptoLoopAlignment); 1252 __ BIND(L_copy_8_bytes_loop); 1253 __ fild_d(Address(from, 0)); 1254 __ fistp_d(Address(from, to_from, Address::times_1)); 1255 __ addptr(from, 8); 1256 __ BIND(L_copy_8_bytes); 1257 __ decrement(count); 1258 __ jcc(Assembler::greaterEqual, L_copy_8_bytes_loop); 1259 } 1260 inc_copy_counter_np(T_LONG); 1261 __ leave(); // required for proper stackwalking of RuntimeStub frame 1262 __ xorptr(rax, rax); // return 0 1263 __ ret(0); 1264 return start; 1265 } 1266 1267 address generate_conjoint_long_copy(address nooverlap_target, 1268 address* entry, const char *name) { 1269 __ align(CodeEntryAlignment); 1270 StubCodeMark mark(this, "StubRoutines", name); 1271 address start = __ pc(); 1272 1273 Label L_copy_8_bytes, L_copy_8_bytes_loop; 1274 const Register from = rax; // source array address 1275 const Register to = rdx; // destination array address 1276 const Register count = rcx; // elements count 1277 const Register end_from = rax; // source array end address 1278 1279 __ enter(); // required for proper stackwalking of RuntimeStub frame 1280 __ movptr(from , Address(rsp, 8+0)); // from 1281 __ movptr(to , Address(rsp, 8+4)); // to 1282 __ movl2ptr(count, Address(rsp, 8+8)); // count 1283 1284 *entry = __ pc(); // Entry point from generic arraycopy stub. 1285 BLOCK_COMMENT("Entry:"); 1286 1287 // arrays overlap test 1288 __ cmpptr(to, from); 1289 RuntimeAddress nooverlap(nooverlap_target); 1290 __ jump_cc(Assembler::belowEqual, nooverlap); 1291 __ lea(end_from, Address(from, count, Address::times_8, 0)); 1292 __ cmpptr(to, end_from); 1293 __ movptr(from, Address(rsp, 8)); // from 1294 __ jump_cc(Assembler::aboveEqual, nooverlap); 1295 1296 __ jmpb(L_copy_8_bytes); 1297 1298 __ align(OptoLoopAlignment); 1299 __ BIND(L_copy_8_bytes_loop); 1300 if (VM_Version::supports_mmx()) { 1301 if (UseXMMForArrayCopy) { 1302 __ movq(xmm0, Address(from, count, Address::times_8)); 1303 __ movq(Address(to, count, Address::times_8), xmm0); 1304 } else { 1305 __ movq(mmx0, Address(from, count, Address::times_8)); 1306 __ movq(Address(to, count, Address::times_8), mmx0); 1307 } 1308 } else { 1309 __ fild_d(Address(from, count, Address::times_8)); 1310 __ fistp_d(Address(to, count, Address::times_8)); 1311 } 1312 __ BIND(L_copy_8_bytes); 1313 __ decrement(count); 1314 __ jcc(Assembler::greaterEqual, L_copy_8_bytes_loop); 1315 1316 if (VM_Version::supports_mmx() && !UseXMMForArrayCopy) { 1317 __ emms(); 1318 } 1319 inc_copy_counter_np(T_LONG); 1320 __ leave(); // required for proper stackwalking of RuntimeStub frame 1321 __ xorptr(rax, rax); // return 0 1322 __ ret(0); 1323 return start; 1324 } 1325 1326 1327 // Helper for generating a dynamic type check. 1328 // The sub_klass must be one of {rbx, rdx, rsi}. 1329 // The temp is killed. 1330 void generate_type_check(Register sub_klass, 1331 Address& super_check_offset_addr, 1332 Address& super_klass_addr, 1333 Register temp, 1334 Label* L_success, Label* L_failure) { 1335 BLOCK_COMMENT("type_check:"); 1336 1337 Label L_fallthrough; 1338 #define LOCAL_JCC(assembler_con, label_ptr) \ 1339 if (label_ptr != NULL) __ jcc(assembler_con, *(label_ptr)); \ 1340 else __ jcc(assembler_con, L_fallthrough) /*omit semi*/ 1341 1342 // The following is a strange variation of the fast path which requires 1343 // one less register, because needed values are on the argument stack. 1344 // __ check_klass_subtype_fast_path(sub_klass, *super_klass*, temp, 1345 // L_success, L_failure, NULL); 1346 assert_different_registers(sub_klass, temp); 1347 1348 int sc_offset = in_bytes(Klass::secondary_super_cache_offset()); 1349 1350 // if the pointers are equal, we are done (e.g., String[] elements) 1351 __ cmpptr(sub_klass, super_klass_addr); 1352 LOCAL_JCC(Assembler::equal, L_success); 1353 1354 // check the supertype display: 1355 __ movl2ptr(temp, super_check_offset_addr); 1356 Address super_check_addr(sub_klass, temp, Address::times_1, 0); 1357 __ movptr(temp, super_check_addr); // load displayed supertype 1358 __ cmpptr(temp, super_klass_addr); // test the super type 1359 LOCAL_JCC(Assembler::equal, L_success); 1360 1361 // if it was a primary super, we can just fail immediately 1362 __ cmpl(super_check_offset_addr, sc_offset); 1363 LOCAL_JCC(Assembler::notEqual, L_failure); 1364 1365 // The repne_scan instruction uses fixed registers, which will get spilled. 1366 // We happen to know this works best when super_klass is in rax. 1367 Register super_klass = temp; 1368 __ movptr(super_klass, super_klass_addr); 1369 __ check_klass_subtype_slow_path(sub_klass, super_klass, noreg, noreg, 1370 L_success, L_failure); 1371 1372 __ bind(L_fallthrough); 1373 1374 if (L_success == NULL) { BLOCK_COMMENT("L_success:"); } 1375 if (L_failure == NULL) { BLOCK_COMMENT("L_failure:"); } 1376 1377 #undef LOCAL_JCC 1378 } 1379 1380 // 1381 // Generate checkcasting array copy stub 1382 // 1383 // Input: 1384 // 4(rsp) - source array address 1385 // 8(rsp) - destination array address 1386 // 12(rsp) - element count, can be zero 1387 // 16(rsp) - size_t ckoff (super_check_offset) 1388 // 20(rsp) - oop ckval (super_klass) 1389 // 1390 // Output: 1391 // rax, == 0 - success 1392 // rax, == -1^K - failure, where K is partial transfer count 1393 // 1394 address generate_checkcast_copy(const char *name, address* entry, bool dest_uninitialized = false) { 1395 __ align(CodeEntryAlignment); 1396 StubCodeMark mark(this, "StubRoutines", name); 1397 address start = __ pc(); 1398 1399 Label L_load_element, L_store_element, L_do_card_marks, L_done; 1400 1401 // register use: 1402 // rax, rdx, rcx -- loop control (end_from, end_to, count) 1403 // rdi, rsi -- element access (oop, klass) 1404 // rbx, -- temp 1405 const Register from = rax; // source array address 1406 const Register to = rdx; // destination array address 1407 const Register length = rcx; // elements count 1408 const Register elem = rdi; // each oop copied 1409 const Register elem_klass = rsi; // each elem._klass (sub_klass) 1410 const Register temp = rbx; // lone remaining temp 1411 1412 __ enter(); // required for proper stackwalking of RuntimeStub frame 1413 1414 __ push(rsi); 1415 __ push(rdi); 1416 __ push(rbx); 1417 1418 Address from_arg(rsp, 16+ 4); // from 1419 Address to_arg(rsp, 16+ 8); // to 1420 Address length_arg(rsp, 16+12); // elements count 1421 Address ckoff_arg(rsp, 16+16); // super_check_offset 1422 Address ckval_arg(rsp, 16+20); // super_klass 1423 1424 // Load up: 1425 __ movptr(from, from_arg); 1426 __ movptr(to, to_arg); 1427 __ movl2ptr(length, length_arg); 1428 1429 if (entry != NULL) { 1430 *entry = __ pc(); // Entry point from generic arraycopy stub. 1431 BLOCK_COMMENT("Entry:"); 1432 } 1433 1434 //--------------------------------------------------------------- 1435 // Assembler stub will be used for this call to arraycopy 1436 // if the two arrays are subtypes of Object[] but the 1437 // destination array type is not equal to or a supertype 1438 // of the source type. Each element must be separately 1439 // checked. 1440 1441 // Loop-invariant addresses. They are exclusive end pointers. 1442 Address end_from_addr(from, length, Address::times_ptr, 0); 1443 Address end_to_addr(to, length, Address::times_ptr, 0); 1444 1445 Register end_from = from; // re-use 1446 Register end_to = to; // re-use 1447 Register count = length; // re-use 1448 1449 // Loop-variant addresses. They assume post-incremented count < 0. 1450 Address from_element_addr(end_from, count, Address::times_ptr, 0); 1451 Address to_element_addr(end_to, count, Address::times_ptr, 0); 1452 Address elem_klass_addr(elem, oopDesc::klass_offset_in_bytes()); 1453 1454 // Copy from low to high addresses, indexed from the end of each array. 1455 gen_write_ref_array_pre_barrier(to, count, dest_uninitialized); 1456 __ lea(end_from, end_from_addr); 1457 __ lea(end_to, end_to_addr); 1458 assert(length == count, ""); // else fix next line: 1459 __ negptr(count); // negate and test the length 1460 __ jccb(Assembler::notZero, L_load_element); 1461 1462 // Empty array: Nothing to do. 1463 __ xorptr(rax, rax); // return 0 on (trivial) success 1464 __ jmp(L_done); 1465 1466 // ======== begin loop ======== 1467 // (Loop is rotated; its entry is L_load_element.) 1468 // Loop control: 1469 // for (count = -count; count != 0; count++) 1470 // Base pointers src, dst are biased by 8*count,to last element. 1471 __ align(OptoLoopAlignment); 1472 1473 __ BIND(L_store_element); 1474 __ movptr(to_element_addr, elem); // store the oop 1475 __ increment(count); // increment the count toward zero 1476 __ jccb(Assembler::zero, L_do_card_marks); 1477 1478 // ======== loop entry is here ======== 1479 __ BIND(L_load_element); 1480 __ movptr(elem, from_element_addr); // load the oop 1481 __ testptr(elem, elem); 1482 __ jccb(Assembler::zero, L_store_element); 1483 1484 // (Could do a trick here: Remember last successful non-null 1485 // element stored and make a quick oop equality check on it.) 1486 1487 __ movptr(elem_klass, elem_klass_addr); // query the object klass 1488 generate_type_check(elem_klass, ckoff_arg, ckval_arg, temp, 1489 &L_store_element, NULL); 1490 // (On fall-through, we have failed the element type check.) 1491 // ======== end loop ======== 1492 1493 // It was a real error; we must depend on the caller to finish the job. 1494 // Register "count" = -1 * number of *remaining* oops, length_arg = *total* oops. 1495 // Emit GC store barriers for the oops we have copied (length_arg + count), 1496 // and report their number to the caller. 1497 __ addl(count, length_arg); // transfers = (length - remaining) 1498 __ movl2ptr(rax, count); // save the value 1499 __ notptr(rax); // report (-1^K) to caller 1500 __ movptr(to, to_arg); // reload 1501 assert_different_registers(to, count, rax); 1502 gen_write_ref_array_post_barrier(to, count); 1503 __ jmpb(L_done); 1504 1505 // Come here on success only. 1506 __ BIND(L_do_card_marks); 1507 __ movl2ptr(count, length_arg); 1508 __ movptr(to, to_arg); // reload 1509 gen_write_ref_array_post_barrier(to, count); 1510 __ xorptr(rax, rax); // return 0 on success 1511 1512 // Common exit point (success or failure). 1513 __ BIND(L_done); 1514 __ pop(rbx); 1515 __ pop(rdi); 1516 __ pop(rsi); 1517 inc_counter_np(SharedRuntime::_checkcast_array_copy_ctr); 1518 __ leave(); // required for proper stackwalking of RuntimeStub frame 1519 __ ret(0); 1520 1521 return start; 1522 } 1523 1524 // 1525 // Generate 'unsafe' array copy stub 1526 // Though just as safe as the other stubs, it takes an unscaled 1527 // size_t argument instead of an element count. 1528 // 1529 // Input: 1530 // 4(rsp) - source array address 1531 // 8(rsp) - destination array address 1532 // 12(rsp) - byte count, can be zero 1533 // 1534 // Output: 1535 // rax, == 0 - success 1536 // rax, == -1 - need to call System.arraycopy 1537 // 1538 // Examines the alignment of the operands and dispatches 1539 // to a long, int, short, or byte copy loop. 1540 // 1541 address generate_unsafe_copy(const char *name, 1542 address byte_copy_entry, 1543 address short_copy_entry, 1544 address int_copy_entry, 1545 address long_copy_entry) { 1546 1547 Label L_long_aligned, L_int_aligned, L_short_aligned; 1548 1549 __ align(CodeEntryAlignment); 1550 StubCodeMark mark(this, "StubRoutines", name); 1551 address start = __ pc(); 1552 1553 const Register from = rax; // source array address 1554 const Register to = rdx; // destination array address 1555 const Register count = rcx; // elements count 1556 1557 __ enter(); // required for proper stackwalking of RuntimeStub frame 1558 __ push(rsi); 1559 __ push(rdi); 1560 Address from_arg(rsp, 12+ 4); // from 1561 Address to_arg(rsp, 12+ 8); // to 1562 Address count_arg(rsp, 12+12); // byte count 1563 1564 // Load up: 1565 __ movptr(from , from_arg); 1566 __ movptr(to , to_arg); 1567 __ movl2ptr(count, count_arg); 1568 1569 // bump this on entry, not on exit: 1570 inc_counter_np(SharedRuntime::_unsafe_array_copy_ctr); 1571 1572 const Register bits = rsi; 1573 __ mov(bits, from); 1574 __ orptr(bits, to); 1575 __ orptr(bits, count); 1576 1577 __ testl(bits, BytesPerLong-1); 1578 __ jccb(Assembler::zero, L_long_aligned); 1579 1580 __ testl(bits, BytesPerInt-1); 1581 __ jccb(Assembler::zero, L_int_aligned); 1582 1583 __ testl(bits, BytesPerShort-1); 1584 __ jump_cc(Assembler::notZero, RuntimeAddress(byte_copy_entry)); 1585 1586 __ BIND(L_short_aligned); 1587 __ shrptr(count, LogBytesPerShort); // size => short_count 1588 __ movl(count_arg, count); // update 'count' 1589 __ jump(RuntimeAddress(short_copy_entry)); 1590 1591 __ BIND(L_int_aligned); 1592 __ shrptr(count, LogBytesPerInt); // size => int_count 1593 __ movl(count_arg, count); // update 'count' 1594 __ jump(RuntimeAddress(int_copy_entry)); 1595 1596 __ BIND(L_long_aligned); 1597 __ shrptr(count, LogBytesPerLong); // size => qword_count 1598 __ movl(count_arg, count); // update 'count' 1599 __ pop(rdi); // Do pops here since jlong_arraycopy stub does not do it. 1600 __ pop(rsi); 1601 __ jump(RuntimeAddress(long_copy_entry)); 1602 1603 return start; 1604 } 1605 1606 1607 // Perform range checks on the proposed arraycopy. 1608 // Smashes src_pos and dst_pos. (Uses them up for temps.) 1609 void arraycopy_range_checks(Register src, 1610 Register src_pos, 1611 Register dst, 1612 Register dst_pos, 1613 Address& length, 1614 Label& L_failed) { 1615 BLOCK_COMMENT("arraycopy_range_checks:"); 1616 const Register src_end = src_pos; // source array end position 1617 const Register dst_end = dst_pos; // destination array end position 1618 __ addl(src_end, length); // src_pos + length 1619 __ addl(dst_end, length); // dst_pos + length 1620 1621 // if (src_pos + length > arrayOop(src)->length() ) FAIL; 1622 __ cmpl(src_end, Address(src, arrayOopDesc::length_offset_in_bytes())); 1623 __ jcc(Assembler::above, L_failed); 1624 1625 // if (dst_pos + length > arrayOop(dst)->length() ) FAIL; 1626 __ cmpl(dst_end, Address(dst, arrayOopDesc::length_offset_in_bytes())); 1627 __ jcc(Assembler::above, L_failed); 1628 1629 BLOCK_COMMENT("arraycopy_range_checks done"); 1630 } 1631 1632 1633 // 1634 // Generate generic array copy stubs 1635 // 1636 // Input: 1637 // 4(rsp) - src oop 1638 // 8(rsp) - src_pos 1639 // 12(rsp) - dst oop 1640 // 16(rsp) - dst_pos 1641 // 20(rsp) - element count 1642 // 1643 // Output: 1644 // rax, == 0 - success 1645 // rax, == -1^K - failure, where K is partial transfer count 1646 // 1647 address generate_generic_copy(const char *name, 1648 address entry_jbyte_arraycopy, 1649 address entry_jshort_arraycopy, 1650 address entry_jint_arraycopy, 1651 address entry_oop_arraycopy, 1652 address entry_jlong_arraycopy, 1653 address entry_checkcast_arraycopy) { 1654 Label L_failed, L_failed_0, L_objArray; 1655 1656 { int modulus = CodeEntryAlignment; 1657 int target = modulus - 5; // 5 = sizeof jmp(L_failed) 1658 int advance = target - (__ offset() % modulus); 1659 if (advance < 0) advance += modulus; 1660 if (advance > 0) __ nop(advance); 1661 } 1662 StubCodeMark mark(this, "StubRoutines", name); 1663 1664 // Short-hop target to L_failed. Makes for denser prologue code. 1665 __ BIND(L_failed_0); 1666 __ jmp(L_failed); 1667 assert(__ offset() % CodeEntryAlignment == 0, "no further alignment needed"); 1668 1669 __ align(CodeEntryAlignment); 1670 address start = __ pc(); 1671 1672 __ enter(); // required for proper stackwalking of RuntimeStub frame 1673 __ push(rsi); 1674 __ push(rdi); 1675 1676 // bump this on entry, not on exit: 1677 inc_counter_np(SharedRuntime::_generic_array_copy_ctr); 1678 1679 // Input values 1680 Address SRC (rsp, 12+ 4); 1681 Address SRC_POS (rsp, 12+ 8); 1682 Address DST (rsp, 12+12); 1683 Address DST_POS (rsp, 12+16); 1684 Address LENGTH (rsp, 12+20); 1685 1686 //----------------------------------------------------------------------- 1687 // Assembler stub will be used for this call to arraycopy 1688 // if the following conditions are met: 1689 // 1690 // (1) src and dst must not be null. 1691 // (2) src_pos must not be negative. 1692 // (3) dst_pos must not be negative. 1693 // (4) length must not be negative. 1694 // (5) src klass and dst klass should be the same and not NULL. 1695 // (6) src and dst should be arrays. 1696 // (7) src_pos + length must not exceed length of src. 1697 // (8) dst_pos + length must not exceed length of dst. 1698 // 1699 1700 const Register src = rax; // source array oop 1701 const Register src_pos = rsi; 1702 const Register dst = rdx; // destination array oop 1703 const Register dst_pos = rdi; 1704 const Register length = rcx; // transfer count 1705 1706 // if (src == NULL) return -1; 1707 __ movptr(src, SRC); // src oop 1708 __ testptr(src, src); 1709 __ jccb(Assembler::zero, L_failed_0); 1710 1711 // if (src_pos < 0) return -1; 1712 __ movl2ptr(src_pos, SRC_POS); // src_pos 1713 __ testl(src_pos, src_pos); 1714 __ jccb(Assembler::negative, L_failed_0); 1715 1716 // if (dst == NULL) return -1; 1717 __ movptr(dst, DST); // dst oop 1718 __ testptr(dst, dst); 1719 __ jccb(Assembler::zero, L_failed_0); 1720 1721 // if (dst_pos < 0) return -1; 1722 __ movl2ptr(dst_pos, DST_POS); // dst_pos 1723 __ testl(dst_pos, dst_pos); 1724 __ jccb(Assembler::negative, L_failed_0); 1725 1726 // if (length < 0) return -1; 1727 __ movl2ptr(length, LENGTH); // length 1728 __ testl(length, length); 1729 __ jccb(Assembler::negative, L_failed_0); 1730 1731 // if (src->klass() == NULL) return -1; 1732 Address src_klass_addr(src, oopDesc::klass_offset_in_bytes()); 1733 Address dst_klass_addr(dst, oopDesc::klass_offset_in_bytes()); 1734 const Register rcx_src_klass = rcx; // array klass 1735 __ movptr(rcx_src_klass, Address(src, oopDesc::klass_offset_in_bytes())); 1736 1737 #ifdef ASSERT 1738 // assert(src->klass() != NULL); 1739 BLOCK_COMMENT("assert klasses not null"); 1740 { Label L1, L2; 1741 __ testptr(rcx_src_klass, rcx_src_klass); 1742 __ jccb(Assembler::notZero, L2); // it is broken if klass is NULL 1743 __ bind(L1); 1744 __ stop("broken null klass"); 1745 __ bind(L2); 1746 __ cmpptr(dst_klass_addr, (int32_t)NULL_WORD); 1747 __ jccb(Assembler::equal, L1); // this would be broken also 1748 BLOCK_COMMENT("assert done"); 1749 } 1750 #endif //ASSERT 1751 1752 // Load layout helper (32-bits) 1753 // 1754 // |array_tag| | header_size | element_type | |log2_element_size| 1755 // 32 30 24 16 8 2 0 1756 // 1757 // array_tag: typeArray = 0x3, objArray = 0x2, non-array = 0x0 1758 // 1759 1760 int lh_offset = in_bytes(Klass::layout_helper_offset()); 1761 Address src_klass_lh_addr(rcx_src_klass, lh_offset); 1762 1763 // Handle objArrays completely differently... 1764 jint objArray_lh = Klass::array_layout_helper(T_OBJECT); 1765 __ cmpl(src_klass_lh_addr, objArray_lh); 1766 __ jcc(Assembler::equal, L_objArray); 1767 1768 // if (src->klass() != dst->klass()) return -1; 1769 __ cmpptr(rcx_src_klass, dst_klass_addr); 1770 __ jccb(Assembler::notEqual, L_failed_0); 1771 1772 const Register rcx_lh = rcx; // layout helper 1773 assert(rcx_lh == rcx_src_klass, "known alias"); 1774 __ movl(rcx_lh, src_klass_lh_addr); 1775 1776 // if (!src->is_Array()) return -1; 1777 __ cmpl(rcx_lh, Klass::_lh_neutral_value); 1778 __ jcc(Assembler::greaterEqual, L_failed_0); // signed cmp 1779 1780 // At this point, it is known to be a typeArray (array_tag 0x3). 1781 #ifdef ASSERT 1782 { Label L; 1783 __ cmpl(rcx_lh, (Klass::_lh_array_tag_type_value << Klass::_lh_array_tag_shift)); 1784 __ jcc(Assembler::greaterEqual, L); // signed cmp 1785 __ stop("must be a primitive array"); 1786 __ bind(L); 1787 } 1788 #endif 1789 1790 assert_different_registers(src, src_pos, dst, dst_pos, rcx_lh); 1791 arraycopy_range_checks(src, src_pos, dst, dst_pos, LENGTH, L_failed); 1792 1793 // TypeArrayKlass 1794 // 1795 // src_addr = (src + array_header_in_bytes()) + (src_pos << log2elemsize); 1796 // dst_addr = (dst + array_header_in_bytes()) + (dst_pos << log2elemsize); 1797 // 1798 const Register rsi_offset = rsi; // array offset 1799 const Register src_array = src; // src array offset 1800 const Register dst_array = dst; // dst array offset 1801 const Register rdi_elsize = rdi; // log2 element size 1802 1803 __ mov(rsi_offset, rcx_lh); 1804 __ shrptr(rsi_offset, Klass::_lh_header_size_shift); 1805 __ andptr(rsi_offset, Klass::_lh_header_size_mask); // array_offset 1806 __ addptr(src_array, rsi_offset); // src array offset 1807 __ addptr(dst_array, rsi_offset); // dst array offset 1808 __ andptr(rcx_lh, Klass::_lh_log2_element_size_mask); // log2 elsize 1809 1810 // next registers should be set before the jump to corresponding stub 1811 const Register from = src; // source array address 1812 const Register to = dst; // destination array address 1813 const Register count = rcx; // elements count 1814 // some of them should be duplicated on stack 1815 #define FROM Address(rsp, 12+ 4) 1816 #define TO Address(rsp, 12+ 8) // Not used now 1817 #define COUNT Address(rsp, 12+12) // Only for oop arraycopy 1818 1819 BLOCK_COMMENT("scale indexes to element size"); 1820 __ movl2ptr(rsi, SRC_POS); // src_pos 1821 __ shlptr(rsi); // src_pos << rcx (log2 elsize) 1822 assert(src_array == from, ""); 1823 __ addptr(from, rsi); // from = src_array + SRC_POS << log2 elsize 1824 __ movl2ptr(rdi, DST_POS); // dst_pos 1825 __ shlptr(rdi); // dst_pos << rcx (log2 elsize) 1826 assert(dst_array == to, ""); 1827 __ addptr(to, rdi); // to = dst_array + DST_POS << log2 elsize 1828 __ movptr(FROM, from); // src_addr 1829 __ mov(rdi_elsize, rcx_lh); // log2 elsize 1830 __ movl2ptr(count, LENGTH); // elements count 1831 1832 BLOCK_COMMENT("choose copy loop based on element size"); 1833 __ cmpl(rdi_elsize, 0); 1834 1835 __ jump_cc(Assembler::equal, RuntimeAddress(entry_jbyte_arraycopy)); 1836 __ cmpl(rdi_elsize, LogBytesPerShort); 1837 __ jump_cc(Assembler::equal, RuntimeAddress(entry_jshort_arraycopy)); 1838 __ cmpl(rdi_elsize, LogBytesPerInt); 1839 __ jump_cc(Assembler::equal, RuntimeAddress(entry_jint_arraycopy)); 1840 #ifdef ASSERT 1841 __ cmpl(rdi_elsize, LogBytesPerLong); 1842 __ jccb(Assembler::notEqual, L_failed); 1843 #endif 1844 __ pop(rdi); // Do pops here since jlong_arraycopy stub does not do it. 1845 __ pop(rsi); 1846 __ jump(RuntimeAddress(entry_jlong_arraycopy)); 1847 1848 __ BIND(L_failed); 1849 __ xorptr(rax, rax); 1850 __ notptr(rax); // return -1 1851 __ pop(rdi); 1852 __ pop(rsi); 1853 __ leave(); // required for proper stackwalking of RuntimeStub frame 1854 __ ret(0); 1855 1856 // ObjArrayKlass 1857 __ BIND(L_objArray); 1858 // live at this point: rcx_src_klass, src[_pos], dst[_pos] 1859 1860 Label L_plain_copy, L_checkcast_copy; 1861 // test array classes for subtyping 1862 __ cmpptr(rcx_src_klass, dst_klass_addr); // usual case is exact equality 1863 __ jccb(Assembler::notEqual, L_checkcast_copy); 1864 1865 // Identically typed arrays can be copied without element-wise checks. 1866 assert_different_registers(src, src_pos, dst, dst_pos, rcx_src_klass); 1867 arraycopy_range_checks(src, src_pos, dst, dst_pos, LENGTH, L_failed); 1868 1869 __ BIND(L_plain_copy); 1870 __ movl2ptr(count, LENGTH); // elements count 1871 __ movl2ptr(src_pos, SRC_POS); // reload src_pos 1872 __ lea(from, Address(src, src_pos, Address::times_ptr, 1873 arrayOopDesc::base_offset_in_bytes(T_OBJECT))); // src_addr 1874 __ movl2ptr(dst_pos, DST_POS); // reload dst_pos 1875 __ lea(to, Address(dst, dst_pos, Address::times_ptr, 1876 arrayOopDesc::base_offset_in_bytes(T_OBJECT))); // dst_addr 1877 __ movptr(FROM, from); // src_addr 1878 __ movptr(TO, to); // dst_addr 1879 __ movl(COUNT, count); // count 1880 __ jump(RuntimeAddress(entry_oop_arraycopy)); 1881 1882 __ BIND(L_checkcast_copy); 1883 // live at this point: rcx_src_klass, dst[_pos], src[_pos] 1884 { 1885 // Handy offsets: 1886 int ek_offset = in_bytes(ObjArrayKlass::element_klass_offset()); 1887 int sco_offset = in_bytes(Klass::super_check_offset_offset()); 1888 1889 Register rsi_dst_klass = rsi; 1890 Register rdi_temp = rdi; 1891 assert(rsi_dst_klass == src_pos, "expected alias w/ src_pos"); 1892 assert(rdi_temp == dst_pos, "expected alias w/ dst_pos"); 1893 Address dst_klass_lh_addr(rsi_dst_klass, lh_offset); 1894 1895 // Before looking at dst.length, make sure dst is also an objArray. 1896 __ movptr(rsi_dst_klass, dst_klass_addr); 1897 __ cmpl(dst_klass_lh_addr, objArray_lh); 1898 __ jccb(Assembler::notEqual, L_failed); 1899 1900 // It is safe to examine both src.length and dst.length. 1901 __ movl2ptr(src_pos, SRC_POS); // reload rsi 1902 arraycopy_range_checks(src, src_pos, dst, dst_pos, LENGTH, L_failed); 1903 // (Now src_pos and dst_pos are killed, but not src and dst.) 1904 1905 // We'll need this temp (don't forget to pop it after the type check). 1906 __ push(rbx); 1907 Register rbx_src_klass = rbx; 1908 1909 __ mov(rbx_src_klass, rcx_src_klass); // spill away from rcx 1910 __ movptr(rsi_dst_klass, dst_klass_addr); 1911 Address super_check_offset_addr(rsi_dst_klass, sco_offset); 1912 Label L_fail_array_check; 1913 generate_type_check(rbx_src_klass, 1914 super_check_offset_addr, dst_klass_addr, 1915 rdi_temp, NULL, &L_fail_array_check); 1916 // (On fall-through, we have passed the array type check.) 1917 __ pop(rbx); 1918 __ jmp(L_plain_copy); 1919 1920 __ BIND(L_fail_array_check); 1921 // Reshuffle arguments so we can call checkcast_arraycopy: 1922 1923 // match initial saves for checkcast_arraycopy 1924 // push(rsi); // already done; see above 1925 // push(rdi); // already done; see above 1926 // push(rbx); // already done; see above 1927 1928 // Marshal outgoing arguments now, freeing registers. 1929 Address from_arg(rsp, 16+ 4); // from 1930 Address to_arg(rsp, 16+ 8); // to 1931 Address length_arg(rsp, 16+12); // elements count 1932 Address ckoff_arg(rsp, 16+16); // super_check_offset 1933 Address ckval_arg(rsp, 16+20); // super_klass 1934 1935 Address SRC_POS_arg(rsp, 16+ 8); 1936 Address DST_POS_arg(rsp, 16+16); 1937 Address LENGTH_arg(rsp, 16+20); 1938 // push rbx, changed the incoming offsets (why not just use rbp,??) 1939 // assert(SRC_POS_arg.disp() == SRC_POS.disp() + 4, ""); 1940 1941 __ movptr(rbx, Address(rsi_dst_klass, ek_offset)); 1942 __ movl2ptr(length, LENGTH_arg); // reload elements count 1943 __ movl2ptr(src_pos, SRC_POS_arg); // reload src_pos 1944 __ movl2ptr(dst_pos, DST_POS_arg); // reload dst_pos 1945 1946 __ movptr(ckval_arg, rbx); // destination element type 1947 __ movl(rbx, Address(rbx, sco_offset)); 1948 __ movl(ckoff_arg, rbx); // corresponding class check offset 1949 1950 __ movl(length_arg, length); // outgoing length argument 1951 1952 __ lea(from, Address(src, src_pos, Address::times_ptr, 1953 arrayOopDesc::base_offset_in_bytes(T_OBJECT))); 1954 __ movptr(from_arg, from); 1955 1956 __ lea(to, Address(dst, dst_pos, Address::times_ptr, 1957 arrayOopDesc::base_offset_in_bytes(T_OBJECT))); 1958 __ movptr(to_arg, to); 1959 __ jump(RuntimeAddress(entry_checkcast_arraycopy)); 1960 } 1961 1962 return start; 1963 } 1964 1965 void generate_arraycopy_stubs() { 1966 address entry; 1967 address entry_jbyte_arraycopy; 1968 address entry_jshort_arraycopy; 1969 address entry_jint_arraycopy; 1970 address entry_oop_arraycopy; 1971 address entry_jlong_arraycopy; 1972 address entry_checkcast_arraycopy; 1973 1974 StubRoutines::_arrayof_jbyte_disjoint_arraycopy = 1975 generate_disjoint_copy(T_BYTE, true, Address::times_1, &entry, 1976 "arrayof_jbyte_disjoint_arraycopy"); 1977 StubRoutines::_arrayof_jbyte_arraycopy = 1978 generate_conjoint_copy(T_BYTE, true, Address::times_1, entry, 1979 NULL, "arrayof_jbyte_arraycopy"); 1980 StubRoutines::_jbyte_disjoint_arraycopy = 1981 generate_disjoint_copy(T_BYTE, false, Address::times_1, &entry, 1982 "jbyte_disjoint_arraycopy"); 1983 StubRoutines::_jbyte_arraycopy = 1984 generate_conjoint_copy(T_BYTE, false, Address::times_1, entry, 1985 &entry_jbyte_arraycopy, "jbyte_arraycopy"); 1986 1987 StubRoutines::_arrayof_jshort_disjoint_arraycopy = 1988 generate_disjoint_copy(T_SHORT, true, Address::times_2, &entry, 1989 "arrayof_jshort_disjoint_arraycopy"); 1990 StubRoutines::_arrayof_jshort_arraycopy = 1991 generate_conjoint_copy(T_SHORT, true, Address::times_2, entry, 1992 NULL, "arrayof_jshort_arraycopy"); 1993 StubRoutines::_jshort_disjoint_arraycopy = 1994 generate_disjoint_copy(T_SHORT, false, Address::times_2, &entry, 1995 "jshort_disjoint_arraycopy"); 1996 StubRoutines::_jshort_arraycopy = 1997 generate_conjoint_copy(T_SHORT, false, Address::times_2, entry, 1998 &entry_jshort_arraycopy, "jshort_arraycopy"); 1999 2000 // Next arrays are always aligned on 4 bytes at least. 2001 StubRoutines::_jint_disjoint_arraycopy = 2002 generate_disjoint_copy(T_INT, true, Address::times_4, &entry, 2003 "jint_disjoint_arraycopy"); 2004 StubRoutines::_jint_arraycopy = 2005 generate_conjoint_copy(T_INT, true, Address::times_4, entry, 2006 &entry_jint_arraycopy, "jint_arraycopy"); 2007 2008 StubRoutines::_oop_disjoint_arraycopy = 2009 generate_disjoint_copy(T_OBJECT, true, Address::times_ptr, &entry, 2010 "oop_disjoint_arraycopy"); 2011 StubRoutines::_oop_arraycopy = 2012 generate_conjoint_copy(T_OBJECT, true, Address::times_ptr, entry, 2013 &entry_oop_arraycopy, "oop_arraycopy"); 2014 2015 StubRoutines::_oop_disjoint_arraycopy_uninit = 2016 generate_disjoint_copy(T_OBJECT, true, Address::times_ptr, &entry, 2017 "oop_disjoint_arraycopy_uninit", 2018 /*dest_uninitialized*/true); 2019 StubRoutines::_oop_arraycopy_uninit = 2020 generate_conjoint_copy(T_OBJECT, true, Address::times_ptr, entry, 2021 NULL, "oop_arraycopy_uninit", 2022 /*dest_uninitialized*/true); 2023 2024 StubRoutines::_jlong_disjoint_arraycopy = 2025 generate_disjoint_long_copy(&entry, "jlong_disjoint_arraycopy"); 2026 StubRoutines::_jlong_arraycopy = 2027 generate_conjoint_long_copy(entry, &entry_jlong_arraycopy, 2028 "jlong_arraycopy"); 2029 2030 StubRoutines::_jbyte_fill = generate_fill(T_BYTE, false, "jbyte_fill"); 2031 StubRoutines::_jshort_fill = generate_fill(T_SHORT, false, "jshort_fill"); 2032 StubRoutines::_jint_fill = generate_fill(T_INT, false, "jint_fill"); 2033 StubRoutines::_arrayof_jbyte_fill = generate_fill(T_BYTE, true, "arrayof_jbyte_fill"); 2034 StubRoutines::_arrayof_jshort_fill = generate_fill(T_SHORT, true, "arrayof_jshort_fill"); 2035 StubRoutines::_arrayof_jint_fill = generate_fill(T_INT, true, "arrayof_jint_fill"); 2036 2037 StubRoutines::_arrayof_jint_disjoint_arraycopy = StubRoutines::_jint_disjoint_arraycopy; 2038 StubRoutines::_arrayof_oop_disjoint_arraycopy = StubRoutines::_oop_disjoint_arraycopy; 2039 StubRoutines::_arrayof_oop_disjoint_arraycopy_uninit = StubRoutines::_oop_disjoint_arraycopy_uninit; 2040 StubRoutines::_arrayof_jlong_disjoint_arraycopy = StubRoutines::_jlong_disjoint_arraycopy; 2041 2042 StubRoutines::_arrayof_jint_arraycopy = StubRoutines::_jint_arraycopy; 2043 StubRoutines::_arrayof_oop_arraycopy = StubRoutines::_oop_arraycopy; 2044 StubRoutines::_arrayof_oop_arraycopy_uninit = StubRoutines::_oop_arraycopy_uninit; 2045 StubRoutines::_arrayof_jlong_arraycopy = StubRoutines::_jlong_arraycopy; 2046 2047 StubRoutines::_checkcast_arraycopy = 2048 generate_checkcast_copy("checkcast_arraycopy", &entry_checkcast_arraycopy); 2049 StubRoutines::_checkcast_arraycopy_uninit = 2050 generate_checkcast_copy("checkcast_arraycopy_uninit", NULL, /*dest_uninitialized*/true); 2051 2052 StubRoutines::_unsafe_arraycopy = 2053 generate_unsafe_copy("unsafe_arraycopy", 2054 entry_jbyte_arraycopy, 2055 entry_jshort_arraycopy, 2056 entry_jint_arraycopy, 2057 entry_jlong_arraycopy); 2058 2059 StubRoutines::_generic_arraycopy = 2060 generate_generic_copy("generic_arraycopy", 2061 entry_jbyte_arraycopy, 2062 entry_jshort_arraycopy, 2063 entry_jint_arraycopy, 2064 entry_oop_arraycopy, 2065 entry_jlong_arraycopy, 2066 entry_checkcast_arraycopy); 2067 } 2068 2069 void generate_math_stubs() { 2070 { 2071 StubCodeMark mark(this, "StubRoutines", "log"); 2072 StubRoutines::_intrinsic_log = (double (*)(double)) __ pc(); 2073 2074 __ fld_d(Address(rsp, 4)); 2075 __ flog(); 2076 __ ret(0); 2077 } 2078 { 2079 StubCodeMark mark(this, "StubRoutines", "log10"); 2080 StubRoutines::_intrinsic_log10 = (double (*)(double)) __ pc(); 2081 2082 __ fld_d(Address(rsp, 4)); 2083 __ flog10(); 2084 __ ret(0); 2085 } 2086 { 2087 StubCodeMark mark(this, "StubRoutines", "sin"); 2088 StubRoutines::_intrinsic_sin = (double (*)(double)) __ pc(); 2089 2090 __ fld_d(Address(rsp, 4)); 2091 __ trigfunc('s'); 2092 __ ret(0); 2093 } 2094 { 2095 StubCodeMark mark(this, "StubRoutines", "cos"); 2096 StubRoutines::_intrinsic_cos = (double (*)(double)) __ pc(); 2097 2098 __ fld_d(Address(rsp, 4)); 2099 __ trigfunc('c'); 2100 __ ret(0); 2101 } 2102 { 2103 StubCodeMark mark(this, "StubRoutines", "tan"); 2104 StubRoutines::_intrinsic_tan = (double (*)(double)) __ pc(); 2105 2106 __ fld_d(Address(rsp, 4)); 2107 __ trigfunc('t'); 2108 __ ret(0); 2109 } 2110 { 2111 StubCodeMark mark(this, "StubRoutines", "exp"); 2112 StubRoutines::_intrinsic_exp = (double (*)(double)) __ pc(); 2113 2114 __ fld_d(Address(rsp, 4)); 2115 __ exp_with_fallback(0); 2116 __ ret(0); 2117 } 2118 { 2119 StubCodeMark mark(this, "StubRoutines", "pow"); 2120 StubRoutines::_intrinsic_pow = (double (*)(double,double)) __ pc(); 2121 2122 __ fld_d(Address(rsp, 12)); 2123 __ fld_d(Address(rsp, 4)); 2124 __ pow_with_fallback(0); 2125 __ ret(0); 2126 } 2127 } 2128 2129 // AES intrinsic stubs 2130 enum {AESBlockSize = 16}; 2131 2132 address generate_key_shuffle_mask() { 2133 __ align(16); 2134 StubCodeMark mark(this, "StubRoutines", "key_shuffle_mask"); 2135 address start = __ pc(); 2136 __ emit_data(0x00010203, relocInfo::none, 0 ); 2137 __ emit_data(0x04050607, relocInfo::none, 0 ); 2138 __ emit_data(0x08090a0b, relocInfo::none, 0 ); 2139 __ emit_data(0x0c0d0e0f, relocInfo::none, 0 ); 2140 return start; 2141 } 2142 2143 // Utility routine for loading a 128-bit key word in little endian format 2144 // can optionally specify that the shuffle mask is already in an xmmregister 2145 void load_key(XMMRegister xmmdst, Register key, int offset, XMMRegister xmm_shuf_mask=NULL) { 2146 __ movdqu(xmmdst, Address(key, offset)); 2147 if (xmm_shuf_mask != NULL) { 2148 __ pshufb(xmmdst, xmm_shuf_mask); 2149 } else { 2150 __ pshufb(xmmdst, ExternalAddress(StubRoutines::x86::key_shuffle_mask_addr())); 2151 } 2152 } 2153 2154 // aesenc using specified key+offset 2155 // can optionally specify that the shuffle mask is already in an xmmregister 2156 void aes_enc_key(XMMRegister xmmdst, XMMRegister xmmtmp, Register key, int offset, XMMRegister xmm_shuf_mask=NULL) { 2157 load_key(xmmtmp, key, offset, xmm_shuf_mask); 2158 __ aesenc(xmmdst, xmmtmp); 2159 } 2160 2161 // aesdec using specified key+offset 2162 // can optionally specify that the shuffle mask is already in an xmmregister 2163 void aes_dec_key(XMMRegister xmmdst, XMMRegister xmmtmp, Register key, int offset, XMMRegister xmm_shuf_mask=NULL) { 2164 load_key(xmmtmp, key, offset, xmm_shuf_mask); 2165 __ aesdec(xmmdst, xmmtmp); 2166 } 2167 2168 2169 // Arguments: 2170 // 2171 // Inputs: 2172 // c_rarg0 - source byte array address 2173 // c_rarg1 - destination byte array address 2174 // c_rarg2 - K (key) in little endian int array 2175 // 2176 address generate_aescrypt_encryptBlock() { 2177 assert(UseAES, "need AES instructions and misaligned SSE support"); 2178 __ align(CodeEntryAlignment); 2179 StubCodeMark mark(this, "StubRoutines", "aescrypt_encryptBlock"); 2180 Label L_doLast; 2181 address start = __ pc(); 2182 2183 const Register from = rdx; // source array address 2184 const Register to = rdx; // destination array address 2185 const Register key = rcx; // key array address 2186 const Register keylen = rax; 2187 const Address from_param(rbp, 8+0); 2188 const Address to_param (rbp, 8+4); 2189 const Address key_param (rbp, 8+8); 2190 2191 const XMMRegister xmm_result = xmm0; 2192 const XMMRegister xmm_key_shuf_mask = xmm1; 2193 const XMMRegister xmm_temp1 = xmm2; 2194 const XMMRegister xmm_temp2 = xmm3; 2195 const XMMRegister xmm_temp3 = xmm4; 2196 const XMMRegister xmm_temp4 = xmm5; 2197 2198 __ enter(); // required for proper stackwalking of RuntimeStub frame 2199 __ movptr(from, from_param); 2200 __ movptr(key, key_param); 2201 2202 // keylen could be only {11, 13, 15} * 4 = {44, 52, 60} 2203 __ movl(keylen, Address(key, arrayOopDesc::length_offset_in_bytes() - arrayOopDesc::base_offset_in_bytes(T_INT))); 2204 2205 __ movdqu(xmm_key_shuf_mask, ExternalAddress(StubRoutines::x86::key_shuffle_mask_addr())); 2206 __ movdqu(xmm_result, Address(from, 0)); // get 16 bytes of input 2207 __ movptr(to, to_param); 2208 2209 // For encryption, the java expanded key ordering is just what we need 2210 2211 load_key(xmm_temp1, key, 0x00, xmm_key_shuf_mask); 2212 __ pxor(xmm_result, xmm_temp1); 2213 2214 load_key(xmm_temp1, key, 0x10, xmm_key_shuf_mask); 2215 load_key(xmm_temp2, key, 0x20, xmm_key_shuf_mask); 2216 load_key(xmm_temp3, key, 0x30, xmm_key_shuf_mask); 2217 load_key(xmm_temp4, key, 0x40, xmm_key_shuf_mask); 2218 2219 __ aesenc(xmm_result, xmm_temp1); 2220 __ aesenc(xmm_result, xmm_temp2); 2221 __ aesenc(xmm_result, xmm_temp3); 2222 __ aesenc(xmm_result, xmm_temp4); 2223 2224 load_key(xmm_temp1, key, 0x50, xmm_key_shuf_mask); 2225 load_key(xmm_temp2, key, 0x60, xmm_key_shuf_mask); 2226 load_key(xmm_temp3, key, 0x70, xmm_key_shuf_mask); 2227 load_key(xmm_temp4, key, 0x80, xmm_key_shuf_mask); 2228 2229 __ aesenc(xmm_result, xmm_temp1); 2230 __ aesenc(xmm_result, xmm_temp2); 2231 __ aesenc(xmm_result, xmm_temp3); 2232 __ aesenc(xmm_result, xmm_temp4); 2233 2234 load_key(xmm_temp1, key, 0x90, xmm_key_shuf_mask); 2235 load_key(xmm_temp2, key, 0xa0, xmm_key_shuf_mask); 2236 2237 __ cmpl(keylen, 44); 2238 __ jccb(Assembler::equal, L_doLast); 2239 2240 __ aesenc(xmm_result, xmm_temp1); 2241 __ aesenc(xmm_result, xmm_temp2); 2242 2243 load_key(xmm_temp1, key, 0xb0, xmm_key_shuf_mask); 2244 load_key(xmm_temp2, key, 0xc0, xmm_key_shuf_mask); 2245 2246 __ cmpl(keylen, 52); 2247 __ jccb(Assembler::equal, L_doLast); 2248 2249 __ aesenc(xmm_result, xmm_temp1); 2250 __ aesenc(xmm_result, xmm_temp2); 2251 2252 load_key(xmm_temp1, key, 0xd0, xmm_key_shuf_mask); 2253 load_key(xmm_temp2, key, 0xe0, xmm_key_shuf_mask); 2254 2255 __ BIND(L_doLast); 2256 __ aesenc(xmm_result, xmm_temp1); 2257 __ aesenclast(xmm_result, xmm_temp2); 2258 __ movdqu(Address(to, 0), xmm_result); // store the result 2259 __ xorptr(rax, rax); // return 0 2260 __ leave(); // required for proper stackwalking of RuntimeStub frame 2261 __ ret(0); 2262 2263 return start; 2264 } 2265 2266 2267 // Arguments: 2268 // 2269 // Inputs: 2270 // c_rarg0 - source byte array address 2271 // c_rarg1 - destination byte array address 2272 // c_rarg2 - K (key) in little endian int array 2273 // 2274 address generate_aescrypt_decryptBlock() { 2275 assert(UseAES, "need AES instructions and misaligned SSE support"); 2276 __ align(CodeEntryAlignment); 2277 StubCodeMark mark(this, "StubRoutines", "aescrypt_decryptBlock"); 2278 Label L_doLast; 2279 address start = __ pc(); 2280 2281 const Register from = rdx; // source array address 2282 const Register to = rdx; // destination array address 2283 const Register key = rcx; // key array address 2284 const Register keylen = rax; 2285 const Address from_param(rbp, 8+0); 2286 const Address to_param (rbp, 8+4); 2287 const Address key_param (rbp, 8+8); 2288 2289 const XMMRegister xmm_result = xmm0; 2290 const XMMRegister xmm_key_shuf_mask = xmm1; 2291 const XMMRegister xmm_temp1 = xmm2; 2292 const XMMRegister xmm_temp2 = xmm3; 2293 const XMMRegister xmm_temp3 = xmm4; 2294 const XMMRegister xmm_temp4 = xmm5; 2295 2296 __ enter(); // required for proper stackwalking of RuntimeStub frame 2297 __ movptr(from, from_param); 2298 __ movptr(key, key_param); 2299 2300 // keylen could be only {11, 13, 15} * 4 = {44, 52, 60} 2301 __ movl(keylen, Address(key, arrayOopDesc::length_offset_in_bytes() - arrayOopDesc::base_offset_in_bytes(T_INT))); 2302 2303 __ movdqu(xmm_key_shuf_mask, ExternalAddress(StubRoutines::x86::key_shuffle_mask_addr())); 2304 __ movdqu(xmm_result, Address(from, 0)); 2305 __ movptr(to, to_param); 2306 2307 // for decryption java expanded key ordering is rotated one position from what we want 2308 // so we start from 0x10 here and hit 0x00 last 2309 // we don't know if the key is aligned, hence not using load-execute form 2310 load_key(xmm_temp1, key, 0x10, xmm_key_shuf_mask); 2311 load_key(xmm_temp2, key, 0x20, xmm_key_shuf_mask); 2312 load_key(xmm_temp3, key, 0x30, xmm_key_shuf_mask); 2313 load_key(xmm_temp4, key, 0x40, xmm_key_shuf_mask); 2314 2315 __ pxor (xmm_result, xmm_temp1); 2316 __ aesdec(xmm_result, xmm_temp2); 2317 __ aesdec(xmm_result, xmm_temp3); 2318 __ aesdec(xmm_result, xmm_temp4); 2319 2320 load_key(xmm_temp1, key, 0x50, xmm_key_shuf_mask); 2321 load_key(xmm_temp2, key, 0x60, xmm_key_shuf_mask); 2322 load_key(xmm_temp3, key, 0x70, xmm_key_shuf_mask); 2323 load_key(xmm_temp4, key, 0x80, xmm_key_shuf_mask); 2324 2325 __ aesdec(xmm_result, xmm_temp1); 2326 __ aesdec(xmm_result, xmm_temp2); 2327 __ aesdec(xmm_result, xmm_temp3); 2328 __ aesdec(xmm_result, xmm_temp4); 2329 2330 load_key(xmm_temp1, key, 0x90, xmm_key_shuf_mask); 2331 load_key(xmm_temp2, key, 0xa0, xmm_key_shuf_mask); 2332 load_key(xmm_temp3, key, 0x00, xmm_key_shuf_mask); 2333 2334 __ cmpl(keylen, 44); 2335 __ jccb(Assembler::equal, L_doLast); 2336 2337 __ aesdec(xmm_result, xmm_temp1); 2338 __ aesdec(xmm_result, xmm_temp2); 2339 2340 load_key(xmm_temp1, key, 0xb0, xmm_key_shuf_mask); 2341 load_key(xmm_temp2, key, 0xc0, xmm_key_shuf_mask); 2342 2343 __ cmpl(keylen, 52); 2344 __ jccb(Assembler::equal, L_doLast); 2345 2346 __ aesdec(xmm_result, xmm_temp1); 2347 __ aesdec(xmm_result, xmm_temp2); 2348 2349 load_key(xmm_temp1, key, 0xd0, xmm_key_shuf_mask); 2350 load_key(xmm_temp2, key, 0xe0, xmm_key_shuf_mask); 2351 2352 __ BIND(L_doLast); 2353 __ aesdec(xmm_result, xmm_temp1); 2354 __ aesdec(xmm_result, xmm_temp2); 2355 2356 // for decryption the aesdeclast operation is always on key+0x00 2357 __ aesdeclast(xmm_result, xmm_temp3); 2358 __ movdqu(Address(to, 0), xmm_result); // store the result 2359 __ xorptr(rax, rax); // return 0 2360 __ leave(); // required for proper stackwalking of RuntimeStub frame 2361 __ ret(0); 2362 2363 return start; 2364 } 2365 2366 void handleSOERegisters(bool saving) { 2367 const int saveFrameSizeInBytes = 4 * wordSize; 2368 const Address saved_rbx (rbp, -3 * wordSize); 2369 const Address saved_rsi (rbp, -2 * wordSize); 2370 const Address saved_rdi (rbp, -1 * wordSize); 2371 2372 if (saving) { 2373 __ subptr(rsp, saveFrameSizeInBytes); 2374 __ movptr(saved_rsi, rsi); 2375 __ movptr(saved_rdi, rdi); 2376 __ movptr(saved_rbx, rbx); 2377 } else { 2378 // restoring 2379 __ movptr(rsi, saved_rsi); 2380 __ movptr(rdi, saved_rdi); 2381 __ movptr(rbx, saved_rbx); 2382 } 2383 } 2384 2385 // Arguments: 2386 // 2387 // Inputs: 2388 // c_rarg0 - source byte array address 2389 // c_rarg1 - destination byte array address 2390 // c_rarg2 - K (key) in little endian int array 2391 // c_rarg3 - r vector byte array address 2392 // c_rarg4 - input length 2393 // 2394 address generate_cipherBlockChaining_encryptAESCrypt() { 2395 assert(UseAES, "need AES instructions and misaligned SSE support"); 2396 __ align(CodeEntryAlignment); 2397 StubCodeMark mark(this, "StubRoutines", "cipherBlockChaining_encryptAESCrypt"); 2398 address start = __ pc(); 2399 2400 Label L_exit, L_key_192_256, L_key_256, L_loopTop_128, L_loopTop_192, L_loopTop_256; 2401 const Register from = rsi; // source array address 2402 const Register to = rdx; // destination array address 2403 const Register key = rcx; // key array address 2404 const Register rvec = rdi; // r byte array initialized from initvector array address 2405 // and left with the results of the last encryption block 2406 const Register len_reg = rbx; // src len (must be multiple of blocksize 16) 2407 const Register pos = rax; 2408 2409 // xmm register assignments for the loops below 2410 const XMMRegister xmm_result = xmm0; 2411 const XMMRegister xmm_temp = xmm1; 2412 // first 6 keys preloaded into xmm2-xmm7 2413 const int XMM_REG_NUM_KEY_FIRST = 2; 2414 const int XMM_REG_NUM_KEY_LAST = 7; 2415 const XMMRegister xmm_key0 = as_XMMRegister(XMM_REG_NUM_KEY_FIRST); 2416 2417 __ enter(); // required for proper stackwalking of RuntimeStub frame 2418 handleSOERegisters(true /*saving*/); 2419 2420 // load registers from incoming parameters 2421 const Address from_param(rbp, 8+0); 2422 const Address to_param (rbp, 8+4); 2423 const Address key_param (rbp, 8+8); 2424 const Address rvec_param (rbp, 8+12); 2425 const Address len_param (rbp, 8+16); 2426 __ movptr(from , from_param); 2427 __ movptr(to , to_param); 2428 __ movptr(key , key_param); 2429 __ movptr(rvec , rvec_param); 2430 __ movptr(len_reg , len_param); 2431 2432 const XMMRegister xmm_key_shuf_mask = xmm_temp; // used temporarily to swap key bytes up front 2433 __ movdqu(xmm_key_shuf_mask, ExternalAddress(StubRoutines::x86::key_shuffle_mask_addr())); 2434 // load up xmm regs 2 thru 7 with keys 0-5 2435 for (int rnum = XMM_REG_NUM_KEY_FIRST, offset = 0x00; rnum <= XMM_REG_NUM_KEY_LAST; rnum++) { 2436 load_key(as_XMMRegister(rnum), key, offset, xmm_key_shuf_mask); 2437 offset += 0x10; 2438 } 2439 2440 __ movdqu(xmm_result, Address(rvec, 0x00)); // initialize xmm_result with r vec 2441 2442 // now split to different paths depending on the keylen (len in ints of AESCrypt.KLE array (52=192, or 60=256)) 2443 __ movl(rax, Address(key, arrayOopDesc::length_offset_in_bytes() - arrayOopDesc::base_offset_in_bytes(T_INT))); 2444 __ cmpl(rax, 44); 2445 __ jcc(Assembler::notEqual, L_key_192_256); 2446 2447 // 128 bit code follows here 2448 __ movl(pos, 0); 2449 __ align(OptoLoopAlignment); 2450 __ BIND(L_loopTop_128); 2451 __ movdqu(xmm_temp, Address(from, pos, Address::times_1, 0)); // get next 16 bytes of input 2452 __ pxor (xmm_result, xmm_temp); // xor with the current r vector 2453 2454 __ pxor (xmm_result, xmm_key0); // do the aes rounds 2455 for (int rnum = XMM_REG_NUM_KEY_FIRST + 1; rnum <= XMM_REG_NUM_KEY_LAST; rnum++) { 2456 __ aesenc(xmm_result, as_XMMRegister(rnum)); 2457 } 2458 for (int key_offset = 0x60; key_offset <= 0x90; key_offset += 0x10) { 2459 aes_enc_key(xmm_result, xmm_temp, key, key_offset); 2460 } 2461 load_key(xmm_temp, key, 0xa0); 2462 __ aesenclast(xmm_result, xmm_temp); 2463 2464 __ movdqu(Address(to, pos, Address::times_1, 0), xmm_result); // store into the next 16 bytes of output 2465 // no need to store r to memory until we exit 2466 __ addptr(pos, AESBlockSize); 2467 __ subptr(len_reg, AESBlockSize); 2468 __ jcc(Assembler::notEqual, L_loopTop_128); 2469 2470 __ BIND(L_exit); 2471 __ movdqu(Address(rvec, 0), xmm_result); // final value of r stored in rvec of CipherBlockChaining object 2472 2473 handleSOERegisters(false /*restoring*/); 2474 __ movl(rax, 0); // return 0 (why?) 2475 __ leave(); // required for proper stackwalking of RuntimeStub frame 2476 __ ret(0); 2477 2478 __ BIND(L_key_192_256); 2479 // here rax = len in ints of AESCrypt.KLE array (52=192, or 60=256) 2480 __ cmpl(rax, 52); 2481 __ jcc(Assembler::notEqual, L_key_256); 2482 2483 // 192-bit code follows here (could be changed to use more xmm registers) 2484 __ movl(pos, 0); 2485 __ align(OptoLoopAlignment); 2486 __ BIND(L_loopTop_192); 2487 __ movdqu(xmm_temp, Address(from, pos, Address::times_1, 0)); // get next 16 bytes of input 2488 __ pxor (xmm_result, xmm_temp); // xor with the current r vector 2489 2490 __ pxor (xmm_result, xmm_key0); // do the aes rounds 2491 for (int rnum = XMM_REG_NUM_KEY_FIRST + 1; rnum <= XMM_REG_NUM_KEY_LAST; rnum++) { 2492 __ aesenc(xmm_result, as_XMMRegister(rnum)); 2493 } 2494 for (int key_offset = 0x60; key_offset <= 0xb0; key_offset += 0x10) { 2495 aes_enc_key(xmm_result, xmm_temp, key, key_offset); 2496 } 2497 load_key(xmm_temp, key, 0xc0); 2498 __ aesenclast(xmm_result, xmm_temp); 2499 2500 __ movdqu(Address(to, pos, Address::times_1, 0), xmm_result); // store into the next 16 bytes of output 2501 // no need to store r to memory until we exit 2502 __ addptr(pos, AESBlockSize); 2503 __ subptr(len_reg, AESBlockSize); 2504 __ jcc(Assembler::notEqual, L_loopTop_192); 2505 __ jmp(L_exit); 2506 2507 __ BIND(L_key_256); 2508 // 256-bit code follows here (could be changed to use more xmm registers) 2509 __ movl(pos, 0); 2510 __ align(OptoLoopAlignment); 2511 __ BIND(L_loopTop_256); 2512 __ movdqu(xmm_temp, Address(from, pos, Address::times_1, 0)); // get next 16 bytes of input 2513 __ pxor (xmm_result, xmm_temp); // xor with the current r vector 2514 2515 __ pxor (xmm_result, xmm_key0); // do the aes rounds 2516 for (int rnum = XMM_REG_NUM_KEY_FIRST + 1; rnum <= XMM_REG_NUM_KEY_LAST; rnum++) { 2517 __ aesenc(xmm_result, as_XMMRegister(rnum)); 2518 } 2519 for (int key_offset = 0x60; key_offset <= 0xd0; key_offset += 0x10) { 2520 aes_enc_key(xmm_result, xmm_temp, key, key_offset); 2521 } 2522 load_key(xmm_temp, key, 0xe0); 2523 __ aesenclast(xmm_result, xmm_temp); 2524 2525 __ movdqu(Address(to, pos, Address::times_1, 0), xmm_result); // store into the next 16 bytes of output 2526 // no need to store r to memory until we exit 2527 __ addptr(pos, AESBlockSize); 2528 __ subptr(len_reg, AESBlockSize); 2529 __ jcc(Assembler::notEqual, L_loopTop_256); 2530 __ jmp(L_exit); 2531 2532 return start; 2533 } 2534 2535 2536 // CBC AES Decryption. 2537 // In 32-bit stub, because of lack of registers we do not try to parallelize 4 blocks at a time. 2538 // 2539 // Arguments: 2540 // 2541 // Inputs: 2542 // c_rarg0 - source byte array address 2543 // c_rarg1 - destination byte array address 2544 // c_rarg2 - K (key) in little endian int array 2545 // c_rarg3 - r vector byte array address 2546 // c_rarg4 - input length 2547 // 2548 2549 address generate_cipherBlockChaining_decryptAESCrypt() { 2550 assert(UseAES, "need AES instructions and misaligned SSE support"); 2551 __ align(CodeEntryAlignment); 2552 StubCodeMark mark(this, "StubRoutines", "cipherBlockChaining_decryptAESCrypt"); 2553 address start = __ pc(); 2554 2555 Label L_exit, L_key_192_256, L_key_256; 2556 Label L_singleBlock_loopTop_128; 2557 Label L_singleBlock_loopTop_192, L_singleBlock_loopTop_256; 2558 const Register from = rsi; // source array address 2559 const Register to = rdx; // destination array address 2560 const Register key = rcx; // key array address 2561 const Register rvec = rdi; // r byte array initialized from initvector array address 2562 // and left with the results of the last encryption block 2563 const Register len_reg = rbx; // src len (must be multiple of blocksize 16) 2564 const Register pos = rax; 2565 2566 // xmm register assignments for the loops below 2567 const XMMRegister xmm_result = xmm0; 2568 const XMMRegister xmm_temp = xmm1; 2569 // first 6 keys preloaded into xmm2-xmm7 2570 const int XMM_REG_NUM_KEY_FIRST = 2; 2571 const int XMM_REG_NUM_KEY_LAST = 7; 2572 const int FIRST_NON_REG_KEY_offset = 0x70; 2573 const XMMRegister xmm_key_first = as_XMMRegister(XMM_REG_NUM_KEY_FIRST); 2574 2575 __ enter(); // required for proper stackwalking of RuntimeStub frame 2576 handleSOERegisters(true /*saving*/); 2577 2578 // load registers from incoming parameters 2579 const Address from_param(rbp, 8+0); 2580 const Address to_param (rbp, 8+4); 2581 const Address key_param (rbp, 8+8); 2582 const Address rvec_param (rbp, 8+12); 2583 const Address len_param (rbp, 8+16); 2584 __ movptr(from , from_param); 2585 __ movptr(to , to_param); 2586 __ movptr(key , key_param); 2587 __ movptr(rvec , rvec_param); 2588 __ movptr(len_reg , len_param); 2589 2590 // the java expanded key ordering is rotated one position from what we want 2591 // so we start from 0x10 here and hit 0x00 last 2592 const XMMRegister xmm_key_shuf_mask = xmm1; // used temporarily to swap key bytes up front 2593 __ movdqu(xmm_key_shuf_mask, ExternalAddress(StubRoutines::x86::key_shuffle_mask_addr())); 2594 // load up xmm regs 2 thru 6 with first 5 keys 2595 for (int rnum = XMM_REG_NUM_KEY_FIRST, offset = 0x10; rnum <= XMM_REG_NUM_KEY_LAST; rnum++) { 2596 load_key(as_XMMRegister(rnum), key, offset, xmm_key_shuf_mask); 2597 offset += 0x10; 2598 } 2599 2600 // inside here, use the rvec register to point to previous block cipher 2601 // with which we xor at the end of each newly decrypted block 2602 const Register prev_block_cipher_ptr = rvec; 2603 2604 // now split to different paths depending on the keylen (len in ints of AESCrypt.KLE array (52=192, or 60=256)) 2605 __ movl(rax, Address(key, arrayOopDesc::length_offset_in_bytes() - arrayOopDesc::base_offset_in_bytes(T_INT))); 2606 __ cmpl(rax, 44); 2607 __ jcc(Assembler::notEqual, L_key_192_256); 2608 2609 2610 // 128-bit code follows here, parallelized 2611 __ movl(pos, 0); 2612 __ align(OptoLoopAlignment); 2613 __ BIND(L_singleBlock_loopTop_128); 2614 __ cmpptr(len_reg, 0); // any blocks left?? 2615 __ jcc(Assembler::equal, L_exit); 2616 __ movdqu(xmm_result, Address(from, pos, Address::times_1, 0)); // get next 16 bytes of cipher input 2617 __ pxor (xmm_result, xmm_key_first); // do the aes dec rounds 2618 for (int rnum = XMM_REG_NUM_KEY_FIRST + 1; rnum <= XMM_REG_NUM_KEY_LAST; rnum++) { 2619 __ aesdec(xmm_result, as_XMMRegister(rnum)); 2620 } 2621 for (int key_offset = FIRST_NON_REG_KEY_offset; key_offset <= 0xa0; key_offset += 0x10) { // 128-bit runs up to key offset a0 2622 aes_dec_key(xmm_result, xmm_temp, key, key_offset); 2623 } 2624 load_key(xmm_temp, key, 0x00); // final key is stored in java expanded array at offset 0 2625 __ aesdeclast(xmm_result, xmm_temp); 2626 __ movdqu(xmm_temp, Address(prev_block_cipher_ptr, 0x00)); 2627 __ pxor (xmm_result, xmm_temp); // xor with the current r vector 2628 __ movdqu(Address(to, pos, Address::times_1, 0), xmm_result); // store into the next 16 bytes of output 2629 // no need to store r to memory until we exit 2630 __ lea(prev_block_cipher_ptr, Address(from, pos, Address::times_1, 0)); // set up new ptr 2631 __ addptr(pos, AESBlockSize); 2632 __ subptr(len_reg, AESBlockSize); 2633 __ jmp(L_singleBlock_loopTop_128); 2634 2635 2636 __ BIND(L_exit); 2637 __ movdqu(xmm_temp, Address(prev_block_cipher_ptr, 0x00)); 2638 __ movptr(rvec , rvec_param); // restore this since used in loop 2639 __ movdqu(Address(rvec, 0), xmm_temp); // final value of r stored in rvec of CipherBlockChaining object 2640 handleSOERegisters(false /*restoring*/); 2641 __ movl(rax, 0); // return 0 (why?) 2642 __ leave(); // required for proper stackwalking of RuntimeStub frame 2643 __ ret(0); 2644 2645 2646 __ BIND(L_key_192_256); 2647 // here rax = len in ints of AESCrypt.KLE array (52=192, or 60=256) 2648 __ cmpl(rax, 52); 2649 __ jcc(Assembler::notEqual, L_key_256); 2650 2651 // 192-bit code follows here (could be optimized to use parallelism) 2652 __ movl(pos, 0); 2653 __ align(OptoLoopAlignment); 2654 __ BIND(L_singleBlock_loopTop_192); 2655 __ movdqu(xmm_result, Address(from, pos, Address::times_1, 0)); // get next 16 bytes of cipher input 2656 __ pxor (xmm_result, xmm_key_first); // do the aes dec rounds 2657 for (int rnum = XMM_REG_NUM_KEY_FIRST + 1; rnum <= XMM_REG_NUM_KEY_LAST; rnum++) { 2658 __ aesdec(xmm_result, as_XMMRegister(rnum)); 2659 } 2660 for (int key_offset = FIRST_NON_REG_KEY_offset; key_offset <= 0xc0; key_offset += 0x10) { // 192-bit runs up to key offset c0 2661 aes_dec_key(xmm_result, xmm_temp, key, key_offset); 2662 } 2663 load_key(xmm_temp, key, 0x00); // final key is stored in java expanded array at offset 0 2664 __ aesdeclast(xmm_result, xmm_temp); 2665 __ movdqu(xmm_temp, Address(prev_block_cipher_ptr, 0x00)); 2666 __ pxor (xmm_result, xmm_temp); // xor with the current r vector 2667 __ movdqu(Address(to, pos, Address::times_1, 0), xmm_result); // store into the next 16 bytes of output 2668 // no need to store r to memory until we exit 2669 __ lea(prev_block_cipher_ptr, Address(from, pos, Address::times_1, 0)); // set up new ptr 2670 __ addptr(pos, AESBlockSize); 2671 __ subptr(len_reg, AESBlockSize); 2672 __ jcc(Assembler::notEqual,L_singleBlock_loopTop_192); 2673 __ jmp(L_exit); 2674 2675 __ BIND(L_key_256); 2676 // 256-bit code follows here (could be optimized to use parallelism) 2677 __ movl(pos, 0); 2678 __ align(OptoLoopAlignment); 2679 __ BIND(L_singleBlock_loopTop_256); 2680 __ movdqu(xmm_result, Address(from, pos, Address::times_1, 0)); // get next 16 bytes of cipher input 2681 __ pxor (xmm_result, xmm_key_first); // do the aes dec rounds 2682 for (int rnum = XMM_REG_NUM_KEY_FIRST + 1; rnum <= XMM_REG_NUM_KEY_LAST; rnum++) { 2683 __ aesdec(xmm_result, as_XMMRegister(rnum)); 2684 } 2685 for (int key_offset = FIRST_NON_REG_KEY_offset; key_offset <= 0xe0; key_offset += 0x10) { // 256-bit runs up to key offset e0 2686 aes_dec_key(xmm_result, xmm_temp, key, key_offset); 2687 } 2688 load_key(xmm_temp, key, 0x00); // final key is stored in java expanded array at offset 0 2689 __ aesdeclast(xmm_result, xmm_temp); 2690 __ movdqu(xmm_temp, Address(prev_block_cipher_ptr, 0x00)); 2691 __ pxor (xmm_result, xmm_temp); // xor with the current r vector 2692 __ movdqu(Address(to, pos, Address::times_1, 0), xmm_result); // store into the next 16 bytes of output 2693 // no need to store r to memory until we exit 2694 __ lea(prev_block_cipher_ptr, Address(from, pos, Address::times_1, 0)); // set up new ptr 2695 __ addptr(pos, AESBlockSize); 2696 __ subptr(len_reg, AESBlockSize); 2697 __ jcc(Assembler::notEqual,L_singleBlock_loopTop_256); 2698 __ jmp(L_exit); 2699 2700 return start; 2701 } 2702 2703 2704 public: 2705 // Information about frame layout at time of blocking runtime call. 2706 // Note that we only have to preserve callee-saved registers since 2707 // the compilers are responsible for supplying a continuation point 2708 // if they expect all registers to be preserved. 2709 enum layout { 2710 thread_off, // last_java_sp 2711 arg1_off, 2712 arg2_off, 2713 rbp_off, // callee saved register 2714 ret_pc, 2715 framesize 2716 }; 2717 2718 private: 2719 2720 #undef __ 2721 #define __ masm-> 2722 2723 //------------------------------------------------------------------------------------------------------------------------ 2724 // Continuation point for throwing of implicit exceptions that are not handled in 2725 // the current activation. Fabricates an exception oop and initiates normal 2726 // exception dispatching in this frame. 2727 // 2728 // Previously the compiler (c2) allowed for callee save registers on Java calls. 2729 // This is no longer true after adapter frames were removed but could possibly 2730 // be brought back in the future if the interpreter code was reworked and it 2731 // was deemed worthwhile. The comment below was left to describe what must 2732 // happen here if callee saves were resurrected. As it stands now this stub 2733 // could actually be a vanilla BufferBlob and have now oopMap at all. 2734 // Since it doesn't make much difference we've chosen to leave it the 2735 // way it was in the callee save days and keep the comment. 2736 2737 // If we need to preserve callee-saved values we need a callee-saved oop map and 2738 // therefore have to make these stubs into RuntimeStubs rather than BufferBlobs. 2739 // If the compiler needs all registers to be preserved between the fault 2740 // point and the exception handler then it must assume responsibility for that in 2741 // AbstractCompiler::continuation_for_implicit_null_exception or 2742 // continuation_for_implicit_division_by_zero_exception. All other implicit 2743 // exceptions (e.g., NullPointerException or AbstractMethodError on entry) are 2744 // either at call sites or otherwise assume that stack unwinding will be initiated, 2745 // so caller saved registers were assumed volatile in the compiler. 2746 address generate_throw_exception(const char* name, address runtime_entry, 2747 Register arg1 = noreg, Register arg2 = noreg) { 2748 2749 int insts_size = 256; 2750 int locs_size = 32; 2751 2752 CodeBuffer code(name, insts_size, locs_size); 2753 OopMapSet* oop_maps = new OopMapSet(); 2754 MacroAssembler* masm = new MacroAssembler(&code); 2755 2756 address start = __ pc(); 2757 2758 // This is an inlined and slightly modified version of call_VM 2759 // which has the ability to fetch the return PC out of 2760 // thread-local storage and also sets up last_Java_sp slightly 2761 // differently than the real call_VM 2762 Register java_thread = rbx; 2763 __ get_thread(java_thread); 2764 2765 __ enter(); // required for proper stackwalking of RuntimeStub frame 2766 2767 // pc and rbp, already pushed 2768 __ subptr(rsp, (framesize-2) * wordSize); // prolog 2769 2770 // Frame is now completed as far as size and linkage. 2771 2772 int frame_complete = __ pc() - start; 2773 2774 // push java thread (becomes first argument of C function) 2775 __ movptr(Address(rsp, thread_off * wordSize), java_thread); 2776 if (arg1 != noreg) { 2777 __ movptr(Address(rsp, arg1_off * wordSize), arg1); 2778 } 2779 if (arg2 != noreg) { 2780 assert(arg1 != noreg, "missing reg arg"); 2781 __ movptr(Address(rsp, arg2_off * wordSize), arg2); 2782 } 2783 2784 // Set up last_Java_sp and last_Java_fp 2785 __ set_last_Java_frame(java_thread, rsp, rbp, NULL); 2786 2787 // Call runtime 2788 BLOCK_COMMENT("call runtime_entry"); 2789 __ call(RuntimeAddress(runtime_entry)); 2790 // Generate oop map 2791 OopMap* map = new OopMap(framesize, 0); 2792 oop_maps->add_gc_map(__ pc() - start, map); 2793 2794 // restore the thread (cannot use the pushed argument since arguments 2795 // may be overwritten by C code generated by an optimizing compiler); 2796 // however can use the register value directly if it is callee saved. 2797 __ get_thread(java_thread); 2798 2799 __ reset_last_Java_frame(java_thread, true, false); 2800 2801 __ leave(); // required for proper stackwalking of RuntimeStub frame 2802 2803 // check for pending exceptions 2804 #ifdef ASSERT 2805 Label L; 2806 __ cmpptr(Address(java_thread, Thread::pending_exception_offset()), (int32_t)NULL_WORD); 2807 __ jcc(Assembler::notEqual, L); 2808 __ should_not_reach_here(); 2809 __ bind(L); 2810 #endif /* ASSERT */ 2811 __ jump(RuntimeAddress(StubRoutines::forward_exception_entry())); 2812 2813 2814 RuntimeStub* stub = RuntimeStub::new_runtime_stub(name, &code, frame_complete, framesize, oop_maps, false); 2815 return stub->entry_point(); 2816 } 2817 2818 2819 void create_control_words() { 2820 // Round to nearest, 53-bit mode, exceptions masked 2821 StubRoutines::_fpu_cntrl_wrd_std = 0x027F; 2822 // Round to zero, 53-bit mode, exception mased 2823 StubRoutines::_fpu_cntrl_wrd_trunc = 0x0D7F; 2824 // Round to nearest, 24-bit mode, exceptions masked 2825 StubRoutines::_fpu_cntrl_wrd_24 = 0x007F; 2826 // Round to nearest, 64-bit mode, exceptions masked 2827 StubRoutines::_fpu_cntrl_wrd_64 = 0x037F; 2828 // Round to nearest, 64-bit mode, exceptions masked 2829 StubRoutines::_mxcsr_std = 0x1F80; 2830 // Note: the following two constants are 80-bit values 2831 // layout is critical for correct loading by FPU. 2832 // Bias for strict fp multiply/divide 2833 StubRoutines::_fpu_subnormal_bias1[0]= 0x00000000; // 2^(-15360) == 0x03ff 8000 0000 0000 0000 2834 StubRoutines::_fpu_subnormal_bias1[1]= 0x80000000; 2835 StubRoutines::_fpu_subnormal_bias1[2]= 0x03ff; 2836 // Un-Bias for strict fp multiply/divide 2837 StubRoutines::_fpu_subnormal_bias2[0]= 0x00000000; // 2^(+15360) == 0x7bff 8000 0000 0000 0000 2838 StubRoutines::_fpu_subnormal_bias2[1]= 0x80000000; 2839 StubRoutines::_fpu_subnormal_bias2[2]= 0x7bff; 2840 } 2841 2842 //--------------------------------------------------------------------------- 2843 // Initialization 2844 2845 void generate_initial() { 2846 // Generates all stubs and initializes the entry points 2847 2848 //------------------------------------------------------------------------------------------------------------------------ 2849 // entry points that exist in all platforms 2850 // Note: This is code that could be shared among different platforms - however the benefit seems to be smaller than 2851 // the disadvantage of having a much more complicated generator structure. See also comment in stubRoutines.hpp. 2852 StubRoutines::_forward_exception_entry = generate_forward_exception(); 2853 2854 StubRoutines::_call_stub_entry = 2855 generate_call_stub(StubRoutines::_call_stub_return_address); 2856 // is referenced by megamorphic call 2857 StubRoutines::_catch_exception_entry = generate_catch_exception(); 2858 2859 // These are currently used by Solaris/Intel 2860 StubRoutines::_atomic_xchg_entry = generate_atomic_xchg(); 2861 2862 StubRoutines::_handler_for_unsafe_access_entry = 2863 generate_handler_for_unsafe_access(); 2864 2865 // platform dependent 2866 create_control_words(); 2867 2868 StubRoutines::x86::_verify_mxcsr_entry = generate_verify_mxcsr(); 2869 StubRoutines::x86::_verify_fpu_cntrl_wrd_entry = generate_verify_fpu_cntrl_wrd(); 2870 StubRoutines::_d2i_wrapper = generate_d2i_wrapper(T_INT, 2871 CAST_FROM_FN_PTR(address, SharedRuntime::d2i)); 2872 StubRoutines::_d2l_wrapper = generate_d2i_wrapper(T_LONG, 2873 CAST_FROM_FN_PTR(address, SharedRuntime::d2l)); 2874 2875 // Build this early so it's available for the interpreter 2876 StubRoutines::_throw_StackOverflowError_entry = generate_throw_exception("StackOverflowError throw_exception", CAST_FROM_FN_PTR(address, SharedRuntime::throw_StackOverflowError)); 2877 } 2878 2879 2880 void generate_all() { 2881 // Generates all stubs and initializes the entry points 2882 2883 // These entry points require SharedInfo::stack0 to be set up in non-core builds 2884 // and need to be relocatable, so they each fabricate a RuntimeStub internally. 2885 StubRoutines::_throw_AbstractMethodError_entry = generate_throw_exception("AbstractMethodError throw_exception", CAST_FROM_FN_PTR(address, SharedRuntime::throw_AbstractMethodError)); 2886 StubRoutines::_throw_IncompatibleClassChangeError_entry= generate_throw_exception("IncompatibleClassChangeError throw_exception", CAST_FROM_FN_PTR(address, SharedRuntime::throw_IncompatibleClassChangeError)); 2887 StubRoutines::_throw_NullPointerException_at_call_entry= generate_throw_exception("NullPointerException at call throw_exception", CAST_FROM_FN_PTR(address, SharedRuntime::throw_NullPointerException_at_call)); 2888 2889 //------------------------------------------------------------------------------------------------------------------------ 2890 // entry points that are platform specific 2891 2892 // support for verify_oop (must happen after universe_init) 2893 StubRoutines::_verify_oop_subroutine_entry = generate_verify_oop(); 2894 2895 // arraycopy stubs used by compilers 2896 generate_arraycopy_stubs(); 2897 2898 generate_math_stubs(); 2899 2900 // don't bother generating these AES intrinsic stubs unless global flag is set 2901 if (UseAESIntrinsics) { 2902 StubRoutines::x86::_key_shuffle_mask_addr = generate_key_shuffle_mask(); // might be needed by the others 2903 2904 StubRoutines::_aescrypt_encryptBlock = generate_aescrypt_encryptBlock(); 2905 StubRoutines::_aescrypt_decryptBlock = generate_aescrypt_decryptBlock(); 2906 StubRoutines::_cipherBlockChaining_encryptAESCrypt = generate_cipherBlockChaining_encryptAESCrypt(); 2907 StubRoutines::_cipherBlockChaining_decryptAESCrypt = generate_cipherBlockChaining_decryptAESCrypt(); 2908 } 2909 } 2910 2911 2912 public: 2913 StubGenerator(CodeBuffer* code, bool all) : StubCodeGenerator(code) { 2914 if (all) { 2915 generate_all(); 2916 } else { 2917 generate_initial(); 2918 } 2919 } 2920 }; // end class declaration 2921 2922 2923 void StubGenerator_generate(CodeBuffer* code, bool all) { 2924 StubGenerator g(code, all); 2925 }