< prev index next >
src/java.desktop/share/classes/sun/java2d/marlin/Stroker.java
Print this page
@@ -24,16 +24,12 @@
*/
package sun.java2d.marlin;
import java.util.Arrays;
-import static java.lang.Math.ulp;
-import static java.lang.Math.sqrt;
import sun.awt.geom.PathConsumer2D;
-import sun.java2d.marlin.Curve.BreakPtrIterator;
-
// TODO: some of the arithmetic here is too verbose and prone to hard to
// debug typos. We should consider making a small Point/Vector class that
// has methods like plus(Point), minus(Point), dot(Point), cross(Point)and such
final class Stroker implements PathConsumer2D, MarlinConst {
@@ -73,11 +69,11 @@
public static final int CAP_SQUARE = 2;
// pisces used to use fixed point arithmetic with 16 decimal digits. I
// didn't want to change the values of the constant below when I converted
// it to floating point, so that's why the divisions by 2^16 are there.
- private static final float ROUND_JOIN_THRESHOLD = 1000/65536f;
+ private static final float ROUND_JOIN_THRESHOLD = 1000.0f/65536.0f;
private static final float C = 0.5522847498307933f;
private static final int MAX_N_CURVES = 11;
@@ -110,13 +106,12 @@
private float smx, smy, cmx, cmy;
private final PolyStack reverse;
// This is where the curve to be processed is put. We give it
- // enough room to store 2 curves: one for the current subdivision, the
- // other for the rest of the curve.
- private final float[] middle = new float[2 * 8];
+ // enough room to store all curves.
+ private final float[] middle = new float[MAX_N_CURVES * 8];
private final float[] lp = new float[8];
private final float[] rp = new float[8];
private final float[] subdivTs = new float[MAX_N_CURVES - 1];
// per-thread renderer context
@@ -156,12 +151,12 @@
int joinStyle,
float miterLimit)
{
this.out = pc2d;
- this.lineWidth2 = lineWidth / 2f;
- this.invHalfLineWidth2Sq = 1f / (2f * lineWidth2 * lineWidth2);
+ this.lineWidth2 = lineWidth / 2.0f;
+ this.invHalfLineWidth2Sq = 1.0f / (2.0f * lineWidth2 * lineWidth2);
this.capStyle = capStyle;
this.joinStyle = joinStyle;
float limit = miterLimit * lineWidth2;
this.miterLimitSq = limit * limit;
@@ -180,30 +175,30 @@
void dispose() {
reverse.dispose();
if (DO_CLEAN_DIRTY) {
// Force zero-fill dirty arrays:
- Arrays.fill(offset0, 0f);
- Arrays.fill(offset1, 0f);
- Arrays.fill(offset2, 0f);
- Arrays.fill(miter, 0f);
- Arrays.fill(middle, 0f);
- Arrays.fill(lp, 0f);
- Arrays.fill(rp, 0f);
- Arrays.fill(subdivTs, 0f);
+ Arrays.fill(offset0, 0.0f);
+ Arrays.fill(offset1, 0.0f);
+ Arrays.fill(offset2, 0.0f);
+ Arrays.fill(miter, 0.0f);
+ Arrays.fill(middle, 0.0f);
+ Arrays.fill(lp, 0.0f);
+ Arrays.fill(rp, 0.0f);
+ Arrays.fill(subdivTs, 0.0f);
}
}
private static void computeOffset(final float lx, final float ly,
final float w, final float[] m)
{
float len = lx*lx + ly*ly;
- if (len == 0f) {
- m[0] = 0f;
- m[1] = 0f;
+ if (len == 0.0f) {
+ m[0] = 0.0f;
+ m[1] = 0.0f;
} else {
- len = (float) sqrt(len);
+ len = (float) Math.sqrt(len);
m[0] = (ly * w) / len;
m[1] = -(lx * w) / len;
}
}
@@ -224,11 +219,11 @@
private void drawRoundJoin(float x, float y,
float omx, float omy, float mx, float my,
boolean rev,
float threshold)
{
- if ((omx == 0f && omy == 0f) || (mx == 0f && my == 0f)) {
+ if ((omx == 0.0f && omy == 0.0f) || (mx == 0.0f && my == 0.0f)) {
return;
}
float domx = omx - mx;
float domy = omy - my;
@@ -256,11 +251,11 @@
// (ext is the angle between omx,omy and mx,my).
final float cosext = omx * mx + omy * my;
// If it is >=0, we know that abs(ext) is <= 90 degrees, so we only
// need 1 curve to approximate the circle section that joins omx,omy
// and mx,my.
- final int numCurves = (cosext >= 0f) ? 1 : 2;
+ final int numCurves = (cosext >= 0.0f) ? 1 : 2;
switch (numCurves) {
case 1:
drawBezApproxForArc(cx, cy, omx, omy, mx, my, rev);
break;
@@ -278,11 +273,11 @@
// perpendicular bisector goes through the origin). This scaling doesn't
// have numerical problems because we know that lineWidth2 divided by
// this normal's length is at least 0.5 and at most sqrt(2)/2 (because
// we know the angle of the arc is > 90 degrees).
float nx = my - omy, ny = omx - mx;
- float nlen = (float) sqrt(nx*nx + ny*ny);
+ float nlen = (float) Math.sqrt(nx*nx + ny*ny);
float scale = lineWidth2/nlen;
float mmx = nx * scale, mmy = ny * scale;
// if (isCW(omx, omy, mx, my) != isCW(mmx, mmy, mx, my)) then we've
// computed the wrong intersection so we get the other one.
@@ -316,12 +311,12 @@
// cv is the length of P1-P0 and P2-P3 divided by the radius of the arc
// (so, cv assumes the arc has radius 1). P0, P1, P2, P3 are the points that
// define the bezier curve we're computing.
// It is computed using the constraints that P1-P0 and P3-P2 are parallel
// to the arc tangents at the endpoints, and that |P1-P0|=|P3-P2|.
- float cv = (float) ((4.0 / 3.0) * sqrt(0.5 - cosext2) /
- (1.0 + sqrt(cosext2 + 0.5)));
+ float cv = (float) ((4.0d / 3.0d) * Math.sqrt(0.5d - cosext2) /
+ (1.0d + Math.sqrt(cosext2 + 0.5d)));
// if clockwise, we need to negate cv.
if (rev) { // rev is equivalent to isCW(omx, omy, mx, my)
cv = -cv;
}
final float x1 = cx + omx;
@@ -346,40 +341,82 @@
emitCurveTo(cx - my - Cmx, cy + mx - Cmy,
cx - mx - Cmy, cy - my + Cmx,
cx - mx, cy - my);
}
- // Put the intersection point of the lines (x0, y0) -> (x1, y1)
- // and (x0p, y0p) -> (x1p, y1p) in m[off] and m[off+1].
- // If the lines are parallel, it will put a non finite number in m.
- private static void computeIntersection(final float x0, final float y0,
- final float x1, final float y1,
- final float x0p, final float y0p,
- final float x1p, final float y1p,
- final float[] m, int off)
+ // Return the intersection point of the lines (x0, y0) -> (x1, y1)
+ // and (x0p, y0p) -> (x1p, y1p) in m[0] and m[1]
+ private static void computeMiter(final float x0, final float y0,
+ final float x1, final float y1,
+ final float x0p, final float y0p,
+ final float x1p, final float y1p,
+ final float[] m, int off)
{
float x10 = x1 - x0;
float y10 = y1 - y0;
float x10p = x1p - x0p;
float y10p = y1p - y0p;
+ // if this is 0, the lines are parallel. If they go in the
+ // same direction, there is no intersection so m[off] and
+ // m[off+1] will contain infinity, so no miter will be drawn.
+ // If they go in the same direction that means that the start of the
+ // current segment and the end of the previous segment have the same
+ // tangent, in which case this method won't even be involved in
+ // miter drawing because it won't be called by drawMiter (because
+ // (mx == omx && my == omy) will be true, and drawMiter will return
+ // immediately).
float den = x10*y10p - x10p*y10;
float t = x10p*(y0-y0p) - y10p*(x0-x0p);
t /= den;
m[off++] = x0 + t*x10;
m[off] = y0 + t*y10;
}
+ // Return the intersection point of the lines (x0, y0) -> (x1, y1)
+ // and (x0p, y0p) -> (x1p, y1p) in m[0] and m[1]
+ private static void safecomputeMiter(final float x0, final float y0,
+ final float x1, final float y1,
+ final float x0p, final float y0p,
+ final float x1p, final float y1p,
+ final float[] m, int off)
+ {
+ float x10 = x1 - x0;
+ float y10 = y1 - y0;
+ float x10p = x1p - x0p;
+ float y10p = y1p - y0p;
+
+ // if this is 0, the lines are parallel. If they go in the
+ // same direction, there is no intersection so m[off] and
+ // m[off+1] will contain infinity, so no miter will be drawn.
+ // If they go in the same direction that means that the start of the
+ // current segment and the end of the previous segment have the same
+ // tangent, in which case this method won't even be involved in
+ // miter drawing because it won't be called by drawMiter (because
+ // (mx == omx && my == omy) will be true, and drawMiter will return
+ // immediately).
+ float den = x10*y10p - x10p*y10;
+ if (den == 0.0f) {
+ m[off++] = (x0 + x0p) / 2.0f;
+ m[off] = (y0 + y0p) / 2.0f;
+ return;
+ }
+ float t = x10p*(y0-y0p) - y10p*(x0-x0p);
+ t /= den;
+ m[off++] = x0 + t*x10;
+ m[off] = y0 + t*y10;
+ }
+
private void drawMiter(final float pdx, final float pdy,
final float x0, final float y0,
final float dx, final float dy,
float omx, float omy, float mx, float my,
boolean rev)
{
if ((mx == omx && my == omy) ||
- (pdx == 0f && pdy == 0f) ||
- (dx == 0f && dy == 0f))
+ (pdx == 0.0f && pdy == 0.0f) ||
+ (dx == 0.0f && dy == 0.0f))
{
return;
}
if (rev) {
@@ -387,13 +424,13 @@
omy = -omy;
mx = -mx;
my = -my;
}
- computeIntersection((x0 - pdx) + omx, (y0 - pdy) + omy, x0 + omx, y0 + omy,
- (dx + x0) + mx, (dy + y0) + my, x0 + mx, y0 + my,
- miter, 0);
+ computeMiter((x0 - pdx) + omx, (y0 - pdy) + omy, x0 + omx, y0 + omy,
+ (dx + x0) + mx, (dy + y0) + my, x0 + mx, y0 + my,
+ miter, 0);
final float miterX = miter[0];
final float miterY = miter[1];
float lenSq = (miterX-x0)*(miterX-x0) + (miterY-y0)*(miterY-y0);
@@ -412,21 +449,21 @@
if (prev == DRAWING_OP_TO) {
finish();
}
this.sx0 = this.cx0 = x0;
this.sy0 = this.cy0 = y0;
- this.cdx = this.sdx = 1f;
- this.cdy = this.sdy = 0f;
+ this.cdx = this.sdx = 1.0f;
+ this.cdy = this.sdy = 0.0f;
this.prev = MOVE_TO;
}
@Override
public void lineTo(float x1, float y1) {
float dx = x1 - cx0;
float dy = y1 - cy0;
- if (dx == 0f && dy == 0f) {
- dx = 1f;
+ if (dx == 0.0f && dy == 0.0f) {
+ dx = 1.0f;
}
computeOffset(dx, dy, lineWidth2, offset0);
final float mx = offset0[0];
final float my = offset0[1];
@@ -452,14 +489,14 @@
if (prev != DRAWING_OP_TO) {
if (prev == CLOSE) {
return;
}
emitMoveTo(cx0, cy0 - lineWidth2);
- this.cmx = this.smx = 0f;
+ this.cmx = this.smx = 0.0f;
this.cmy = this.smy = -lineWidth2;
- this.cdx = this.sdx = 1f;
- this.cdy = this.sdy = 0f;
+ this.cdx = this.sdx = 1.0f;
+ this.cdy = this.sdy = 0.0f;
finish();
return;
}
if (cx0 != sx0 || cy0 != sy0) {
@@ -655,12 +692,12 @@
float dx1 = x2 - x1;
float dy1 = y2 - y1;
// if p1 == p2 && p3 == p4: draw line from p1->p4, unless p1 == p4,
// in which case ignore if p1 == p2
- final boolean p1eqp2 = within(x1,y1,x2,y2, 6f * ulp(y2));
- final boolean p3eqp4 = within(x3,y3,x4,y4, 6f * ulp(y4));
+ final boolean p1eqp2 = within(x1,y1,x2,y2, 6.0f * Math.ulp(y2));
+ final boolean p3eqp4 = within(x3,y3,x4,y4, 6.0f * Math.ulp(y4));
if (p1eqp2 && p3eqp4) {
getLineOffsets(x1, y1, x4, y4, leftOff, rightOff);
return 4;
} else if (p1eqp2) {
dx1 = x3 - x1;
@@ -672,11 +709,11 @@
// if p2-p1 and p4-p3 are parallel, that must mean this curve is a line
float dotsq = (dx1 * dx4 + dy1 * dy4);
dotsq *= dotsq;
float l1sq = dx1 * dx1 + dy1 * dy1, l4sq = dx4 * dx4 + dy4 * dy4;
- if (Helpers.within(dotsq, l1sq * l4sq, 4f * ulp(dotsq))) {
+ if (Helpers.within(dotsq, l1sq * l4sq, 4.0f * Math.ulp(dotsq))) {
getLineOffsets(x1, y1, x4, y4, leftOff, rightOff);
return 4;
}
// What we're trying to do in this function is to approximate an ideal
@@ -724,12 +761,12 @@
// [dy1, dy4][c2]
// At this point we are left with a simple linear system and we solve it by
// getting the inverse of the matrix above. Then we use [c1,c2] to compute
// p2p and p3p.
- float x = (x1 + 3f * (x2 + x3) + x4) / 8f;
- float y = (y1 + 3f * (y2 + y3) + y4) / 8f;
+ float x = (x1 + 3.0f * (x2 + x3) + x4) / 8.0f;
+ float y = (y1 + 3.0f * (y2 + y3) + y4) / 8.0f;
// (dxm,dym) is some tangent of B at t=0.5. This means it's equal to
// c*B'(0.5) for some constant c.
float dxm = x3 + x4 - x1 - x2, dym = y3 + y4 - y1 - y2;
// this computes the offsets at t=0, 0.5, 1, using the property that
@@ -743,14 +780,14 @@
float xi = x + offset1[0]; // interpolation
float yi = y + offset1[1]; // point
float x4p = x4 + offset2[0]; // end
float y4p = y4 + offset2[1]; // point
- float invdet43 = 4f / (3f * (dx1 * dy4 - dy1 * dx4));
+ float invdet43 = 4.0f / (3.0f * (dx1 * dy4 - dy1 * dx4));
- float two_pi_m_p1_m_p4x = 2f * xi - x1p - x4p;
- float two_pi_m_p1_m_p4y = 2f * yi - y1p - y4p;
+ float two_pi_m_p1_m_p4x = 2.0f * xi - x1p - x4p;
+ float two_pi_m_p1_m_p4y = 2.0f * yi - y1p - y4p;
float c1 = invdet43 * (dy4 * two_pi_m_p1_m_p4x - dx4 * two_pi_m_p1_m_p4y);
float c2 = invdet43 * (dx1 * two_pi_m_p1_m_p4y - dy1 * two_pi_m_p1_m_p4x);
float x2p, y2p, x3p, y3p;
x2p = x1p + c1*dx1;
@@ -762,15 +799,15 @@
leftOff[2] = x2p; leftOff[3] = y2p;
leftOff[4] = x3p; leftOff[5] = y3p;
leftOff[6] = x4p; leftOff[7] = y4p;
x1p = x1 - offset0[0]; y1p = y1 - offset0[1];
- xi = xi - 2f * offset1[0]; yi = yi - 2f * offset1[1];
+ xi = xi - 2.0f * offset1[0]; yi = yi - 2.0f * offset1[1];
x4p = x4 - offset2[0]; y4p = y4 - offset2[1];
- two_pi_m_p1_m_p4x = 2f * xi - x1p - x4p;
- two_pi_m_p1_m_p4y = 2f * yi - y1p - y4p;
+ two_pi_m_p1_m_p4x = 2.0f * xi - x1p - x4p;
+ two_pi_m_p1_m_p4y = 2.0f * yi - y1p - y4p;
c1 = invdet43 * (dy4 * two_pi_m_p1_m_p4x - dx4 * two_pi_m_p1_m_p4y);
c2 = invdet43 * (dx1 * two_pi_m_p1_m_p4y - dy1 * two_pi_m_p1_m_p4x);
x2p = x1p + c1*dx1;
y2p = y1p + c1*dy1;
@@ -782,10 +819,12 @@
rightOff[4] = x3p; rightOff[5] = y3p;
rightOff[6] = x4p; rightOff[7] = y4p;
return 8;
}
+ // compute offset curves using bezier spline through t=0.5 (i.e.
+ // ComputedCurve(0.5) == IdealParallelCurve(0.5))
// return the kind of curve in the right and left arrays.
private int computeOffsetQuad(float[] pts, final int off,
float[] leftOff, float[] rightOff)
{
final float x1 = pts[off + 0], y1 = pts[off + 1];
@@ -795,173 +834,57 @@
final float dx3 = x3 - x2;
final float dy3 = y3 - y2;
final float dx1 = x2 - x1;
final float dy1 = y2 - y1;
- // this computes the offsets at t = 0, 1
- computeOffset(dx1, dy1, lineWidth2, offset0);
- computeOffset(dx3, dy3, lineWidth2, offset1);
+ // if p1=p2 or p3=p4 it means that the derivative at the endpoint
+ // vanishes, which creates problems with computeOffset. Usually
+ // this happens when this stroker object is trying to winden
+ // a curve with a cusp. What happens is that curveTo splits
+ // the input curve at the cusp, and passes it to this function.
+ // because of inaccuracies in the splitting, we consider points
+ // equal if they're very close to each other.
- leftOff[0] = x1 + offset0[0]; leftOff[1] = y1 + offset0[1];
- leftOff[4] = x3 + offset1[0]; leftOff[5] = y3 + offset1[1];
- rightOff[0] = x1 - offset0[0]; rightOff[1] = y1 - offset0[1];
- rightOff[4] = x3 - offset1[0]; rightOff[5] = y3 - offset1[1];
-
- float x1p = leftOff[0]; // start
- float y1p = leftOff[1]; // point
- float x3p = leftOff[4]; // end
- float y3p = leftOff[5]; // point
-
- // Corner cases:
- // 1. If the two control vectors are parallel, we'll end up with NaN's
- // in leftOff (and rightOff in the body of the if below), so we'll
- // do getLineOffsets, which is right.
- // 2. If the first or second two points are equal, then (dx1,dy1)==(0,0)
- // or (dx3,dy3)==(0,0), so (x1p, y1p)==(x1p+dx1, y1p+dy1)
- // or (x3p, y3p)==(x3p-dx3, y3p-dy3), which means that
- // computeIntersection will put NaN's in leftOff and right off, and
- // we will do getLineOffsets, which is right.
- computeIntersection(x1p, y1p, x1p+dx1, y1p+dy1, x3p, y3p, x3p-dx3, y3p-dy3, leftOff, 2);
- float cx = leftOff[2];
- float cy = leftOff[3];
-
- if (!(isFinite(cx) && isFinite(cy))) {
- // maybe the right path is not degenerate.
- x1p = rightOff[0];
- y1p = rightOff[1];
- x3p = rightOff[4];
- y3p = rightOff[5];
- computeIntersection(x1p, y1p, x1p+dx1, y1p+dy1, x3p, y3p, x3p-dx3, y3p-dy3, rightOff, 2);
- cx = rightOff[2];
- cy = rightOff[3];
- if (!(isFinite(cx) && isFinite(cy))) {
- // both are degenerate. This curve is a line.
- getLineOffsets(x1, y1, x3, y3, leftOff, rightOff);
- return 4;
- }
- // {left,right}Off[0,1,4,5] are already set to the correct values.
- leftOff[2] = 2f * x2 - cx;
- leftOff[3] = 2f * y2 - cy;
- return 6;
+ // if p1 == p2 && p3 == p4: draw line from p1->p4, unless p1 == p4,
+ // in which case ignore.
+ final boolean p1eqp2 = within(x1,y1,x2,y2, 6.0f * Math.ulp(y2));
+ final boolean p2eqp3 = within(x2,y2,x3,y3, 6.0f * Math.ulp(y3));
+ if (p1eqp2 || p2eqp3) {
+ getLineOffsets(x1, y1, x3, y3, leftOff, rightOff);
+ return 4;
}
- // rightOff[2,3] = (x2,y2) - ((left_x2, left_y2) - (x2, y2))
- // == 2*(x2, y2) - (left_x2, left_y2)
- rightOff[2] = 2f * x2 - cx;
- rightOff[3] = 2f * y2 - cy;
- return 6;
- }
-
- private static boolean isFinite(float x) {
- return (Float.NEGATIVE_INFINITY < x && x < Float.POSITIVE_INFINITY);
- }
-
- // If this class is compiled with ecj, then Hotspot crashes when OSR
- // compiling this function. See bugs 7004570 and 6675699
- // TODO: until those are fixed, we should work around that by
- // manually inlining this into curveTo and quadTo.
-/******************************* WORKAROUND **********************************
- private void somethingTo(final int type) {
- // need these so we can update the state at the end of this method
- final float xf = middle[type-2], yf = middle[type-1];
- float dxs = middle[2] - middle[0];
- float dys = middle[3] - middle[1];
- float dxf = middle[type - 2] - middle[type - 4];
- float dyf = middle[type - 1] - middle[type - 3];
- switch(type) {
- case 6:
- if ((dxs == 0f && dys == 0f) ||
- (dxf == 0f && dyf == 0f)) {
- dxs = dxf = middle[4] - middle[0];
- dys = dyf = middle[5] - middle[1];
- }
- break;
- case 8:
- boolean p1eqp2 = (dxs == 0f && dys == 0f);
- boolean p3eqp4 = (dxf == 0f && dyf == 0f);
- if (p1eqp2) {
- dxs = middle[4] - middle[0];
- dys = middle[5] - middle[1];
- if (dxs == 0f && dys == 0f) {
- dxs = middle[6] - middle[0];
- dys = middle[7] - middle[1];
- }
- }
- if (p3eqp4) {
- dxf = middle[6] - middle[2];
- dyf = middle[7] - middle[3];
- if (dxf == 0f && dyf == 0f) {
- dxf = middle[6] - middle[0];
- dyf = middle[7] - middle[1];
- }
- }
- }
- if (dxs == 0f && dys == 0f) {
- // this happens iff the "curve" is just a point
- lineTo(middle[0], middle[1]);
- return;
- }
- // if these vectors are too small, normalize them, to avoid future
- // precision problems.
- if (Math.abs(dxs) < 0.1f && Math.abs(dys) < 0.1f) {
- float len = (float) sqrt(dxs*dxs + dys*dys);
- dxs /= len;
- dys /= len;
- }
- if (Math.abs(dxf) < 0.1f && Math.abs(dyf) < 0.1f) {
- float len = (float) sqrt(dxf*dxf + dyf*dyf);
- dxf /= len;
- dyf /= len;
+ // if p2-p1 and p4-p3 are parallel, that must mean this curve is a line
+ float dotsq = (dx1 * dx3 + dy1 * dy3);
+ dotsq *= dotsq;
+ float l1sq = dx1 * dx1 + dy1 * dy1, l3sq = dx3 * dx3 + dy3 * dy3;
+ if (Helpers.within(dotsq, l1sq * l3sq, 4.0f * Math.ulp(dotsq))) {
+ getLineOffsets(x1, y1, x3, y3, leftOff, rightOff);
+ return 4;
}
- computeOffset(dxs, dys, lineWidth2, offset0);
- final float mx = offset0[0];
- final float my = offset0[1];
- drawJoin(cdx, cdy, cx0, cy0, dxs, dys, cmx, cmy, mx, my);
-
- int nSplits = findSubdivPoints(curve, middle, subdivTs, type, lineWidth2);
-
- int kind = 0;
- BreakPtrIterator it = curve.breakPtsAtTs(middle, type, subdivTs, nSplits);
- while(it.hasNext()) {
- int curCurveOff = it.next();
+ // this computes the offsets at t=0, 0.5, 1, using the property that
+ // for any bezier curve the vectors p2-p1 and p4-p3 are parallel to
+ // the (dx/dt, dy/dt) vectors at the endpoints.
+ computeOffset(dx1, dy1, lineWidth2, offset0);
+ computeOffset(dx3, dy3, lineWidth2, offset1);
- switch (type) {
- case 8:
- kind = computeOffsetCubic(middle, curCurveOff, lp, rp);
- break;
- case 6:
- kind = computeOffsetQuad(middle, curCurveOff, lp, rp);
- break;
- }
- emitLineTo(lp[0], lp[1]);
- switch(kind) {
- case 8:
- emitCurveTo(lp[2], lp[3], lp[4], lp[5], lp[6], lp[7]);
- emitCurveToRev(rp[0], rp[1], rp[2], rp[3], rp[4], rp[5]);
- break;
- case 6:
- emitQuadTo(lp[2], lp[3], lp[4], lp[5]);
- emitQuadToRev(rp[0], rp[1], rp[2], rp[3]);
- break;
- case 4:
- emitLineTo(lp[2], lp[3]);
- emitLineTo(rp[0], rp[1], true);
- break;
- }
- emitLineTo(rp[kind - 2], rp[kind - 1], true);
- }
+ float x1p = x1 + offset0[0]; // start
+ float y1p = y1 + offset0[1]; // point
+ float x3p = x3 + offset1[0]; // end
+ float y3p = y3 + offset1[1]; // point
+ safecomputeMiter(x1p, y1p, x1p+dx1, y1p+dy1, x3p, y3p, x3p-dx3, y3p-dy3, leftOff, 2);
+ leftOff[0] = x1p; leftOff[1] = y1p;
+ leftOff[4] = x3p; leftOff[5] = y3p;
- this.cmx = (lp[kind - 2] - rp[kind - 2]) / 2;
- this.cmy = (lp[kind - 1] - rp[kind - 1]) / 2;
- this.cdx = dxf;
- this.cdy = dyf;
- this.cx0 = xf;
- this.cy0 = yf;
- this.prev = DRAWING_OP_TO;
+ x1p = x1 - offset0[0]; y1p = y1 - offset0[1];
+ x3p = x3 - offset1[0]; y3p = y3 - offset1[1];
+ safecomputeMiter(x1p, y1p, x1p+dx1, y1p+dy1, x3p, y3p, x3p-dx3, y3p-dy3, rightOff, 2);
+ rightOff[0] = x1p; rightOff[1] = y1p;
+ rightOff[4] = x3p; rightOff[5] = y3p;
+ return 6;
}
-****************************** END WORKAROUND *******************************/
// finds values of t where the curve in pts should be subdivided in order
// to get good offset curves a distance of w away from the middle curve.
// Stores the points in ts, and returns how many of them there were.
private static int findSubdivPoints(final Curve c, float[] pts, float[] ts,
@@ -969,15 +892,15 @@
{
final float x12 = pts[2] - pts[0];
final float y12 = pts[3] - pts[1];
// if the curve is already parallel to either axis we gain nothing
// from rotating it.
- if (y12 != 0f && x12 != 0f) {
+ if (y12 != 0.0f && x12 != 0.0f) {
// we rotate it so that the first vector in the control polygon is
// parallel to the x-axis. This will ensure that rotated quarter
// circles won't be subdivided.
- final float hypot = (float) sqrt(x12 * x12 + y12 * y12);
+ final float hypot = (float) Math.sqrt(x12 * x12 + y12 * y12);
final float cos = x12 / hypot;
final float sin = y12 / hypot;
final float x1 = cos * pts[0] + sin * pts[1];
final float y1 = cos * pts[1] - sin * pts[0];
final float x2 = cos * pts[2] + sin * pts[3];
@@ -1029,71 +952,74 @@
mid[0] = cx0; mid[1] = cy0;
mid[2] = x1; mid[3] = y1;
mid[4] = x2; mid[5] = y2;
mid[6] = x3; mid[7] = y3;
- // inlined version of somethingTo(8);
- // See the TODO on somethingTo
-
// need these so we can update the state at the end of this method
final float xf = mid[6], yf = mid[7];
float dxs = mid[2] - mid[0];
float dys = mid[3] - mid[1];
float dxf = mid[6] - mid[4];
float dyf = mid[7] - mid[5];
- boolean p1eqp2 = (dxs == 0f && dys == 0f);
- boolean p3eqp4 = (dxf == 0f && dyf == 0f);
+ boolean p1eqp2 = (dxs == 0.0f && dys == 0.0f);
+ boolean p3eqp4 = (dxf == 0.0f && dyf == 0.0f);
if (p1eqp2) {
dxs = mid[4] - mid[0];
dys = mid[5] - mid[1];
- if (dxs == 0f && dys == 0f) {
+ if (dxs == 0.0f && dys == 0.0f) {
dxs = mid[6] - mid[0];
dys = mid[7] - mid[1];
}
}
if (p3eqp4) {
dxf = mid[6] - mid[2];
dyf = mid[7] - mid[3];
- if (dxf == 0f && dyf == 0f) {
+ if (dxf == 0.0f && dyf == 0.0f) {
dxf = mid[6] - mid[0];
dyf = mid[7] - mid[1];
}
}
- if (dxs == 0f && dys == 0f) {
+ if (dxs == 0.0f && dys == 0.0f) {
// this happens if the "curve" is just a point
lineTo(mid[0], mid[1]);
return;
}
// if these vectors are too small, normalize them, to avoid future
// precision problems.
if (Math.abs(dxs) < 0.1f && Math.abs(dys) < 0.1f) {
- float len = (float) sqrt(dxs*dxs + dys*dys);
+ float len = (float) Math.sqrt(dxs*dxs + dys*dys);
dxs /= len;
dys /= len;
}
if (Math.abs(dxf) < 0.1f && Math.abs(dyf) < 0.1f) {
- float len = (float) sqrt(dxf*dxf + dyf*dyf);
+ float len = (float) Math.sqrt(dxf*dxf + dyf*dyf);
dxf /= len;
dyf /= len;
}
computeOffset(dxs, dys, lineWidth2, offset0);
drawJoin(cdx, cdy, cx0, cy0, dxs, dys, cmx, cmy, offset0[0], offset0[1]);
- int nSplits = findSubdivPoints(curve, mid, subdivTs, 8, lineWidth2);
+ final int nSplits = findSubdivPoints(curve, mid, subdivTs, 8, lineWidth2);
+
+ float prevT = 0.0f;
+ for (int i = 0, off = 0; i < nSplits; i++, off += 6) {
+ final float t = subdivTs[i];
+ Helpers.subdivideCubicAt((t - prevT) / (1.0f - prevT),
+ mid, off, mid, off, mid, off + 6);
+ prevT = t;
+ }
final float[] l = lp;
final float[] r = rp;
int kind = 0;
- BreakPtrIterator it = curve.breakPtsAtTs(mid, 8, subdivTs, nSplits);
- while(it.hasNext()) {
- int curCurveOff = it.next();
+ for (int i = 0, off = 0; i <= nSplits; i++, off += 6) {
+ kind = computeOffsetCubic(mid, off, l, r);
- kind = computeOffsetCubic(mid, curCurveOff, l, r);
emitLineTo(l[0], l[1]);
switch(kind) {
case 8:
emitCurveTo(l[2], l[3], l[4], l[5], l[6], l[7]);
@@ -1106,12 +1032,12 @@
default:
}
emitLineToRev(r[kind - 2], r[kind - 1]);
}
- this.cmx = (l[kind - 2] - r[kind - 2]) / 2f;
- this.cmy = (l[kind - 1] - r[kind - 1]) / 2f;
+ this.cmx = (l[kind - 2] - r[kind - 2]) / 2.0f;
+ this.cmy = (l[kind - 1] - r[kind - 1]) / 2.0f;
this.cdx = dxf;
this.cdy = dyf;
this.cx0 = xf;
this.cy0 = yf;
this.prev = DRAWING_OP_TO;
@@ -1122,55 +1048,58 @@
mid[0] = cx0; mid[1] = cy0;
mid[2] = x1; mid[3] = y1;
mid[4] = x2; mid[5] = y2;
- // inlined version of somethingTo(8);
- // See the TODO on somethingTo
-
// need these so we can update the state at the end of this method
final float xf = mid[4], yf = mid[5];
float dxs = mid[2] - mid[0];
float dys = mid[3] - mid[1];
float dxf = mid[4] - mid[2];
float dyf = mid[5] - mid[3];
- if ((dxs == 0f && dys == 0f) || (dxf == 0f && dyf == 0f)) {
+ if ((dxs == 0.0f && dys == 0.0f) || (dxf == 0.0f && dyf == 0.0f)) {
dxs = dxf = mid[4] - mid[0];
dys = dyf = mid[5] - mid[1];
}
- if (dxs == 0f && dys == 0f) {
+ if (dxs == 0.0f && dys == 0.0f) {
// this happens if the "curve" is just a point
lineTo(mid[0], mid[1]);
return;
}
// if these vectors are too small, normalize them, to avoid future
// precision problems.
if (Math.abs(dxs) < 0.1f && Math.abs(dys) < 0.1f) {
- float len = (float) sqrt(dxs*dxs + dys*dys);
+ float len = (float) Math.sqrt(dxs*dxs + dys*dys);
dxs /= len;
dys /= len;
}
if (Math.abs(dxf) < 0.1f && Math.abs(dyf) < 0.1f) {
- float len = (float) sqrt(dxf*dxf + dyf*dyf);
+ float len = (float) Math.sqrt(dxf*dxf + dyf*dyf);
dxf /= len;
dyf /= len;
}
computeOffset(dxs, dys, lineWidth2, offset0);
drawJoin(cdx, cdy, cx0, cy0, dxs, dys, cmx, cmy, offset0[0], offset0[1]);
int nSplits = findSubdivPoints(curve, mid, subdivTs, 6, lineWidth2);
+ float prevt = 0.0f;
+ for (int i = 0, off = 0; i < nSplits; i++, off += 4) {
+ final float t = subdivTs[i];
+ Helpers.subdivideQuadAt((t - prevt) / (1.0f - prevt),
+ mid, off, mid, off, mid, off + 4);
+ prevt = t;
+ }
+
final float[] l = lp;
final float[] r = rp;
int kind = 0;
- BreakPtrIterator it = curve.breakPtsAtTs(mid, 6, subdivTs, nSplits);
- while(it.hasNext()) {
- int curCurveOff = it.next();
+ for (int i = 0, off = 0; i <= nSplits; i++, off += 4) {
+ kind = computeOffsetQuad(mid, off, l, r);
- kind = computeOffsetQuad(mid, curCurveOff, l, r);
emitLineTo(l[0], l[1]);
switch(kind) {
case 6:
emitQuadTo(l[2], l[3], l[4], l[5]);
@@ -1183,12 +1112,12 @@
default:
}
emitLineToRev(r[kind - 2], r[kind - 1]);
}
- this.cmx = (l[kind - 2] - r[kind - 2]) / 2f;
- this.cmy = (l[kind - 1] - r[kind - 1]) / 2f;
+ this.cmx = (l[kind - 2] - r[kind - 2]) / 2.0f;
+ this.cmy = (l[kind - 1] - r[kind - 1]) / 2.0f;
this.cdx = dxf;
this.cdy = dyf;
this.cx0 = xf;
this.cy0 = yf;
this.prev = DRAWING_OP_TO;
@@ -1203,15 +1132,15 @@
static final class PolyStack {
private static final byte TYPE_LINETO = (byte) 0;
private static final byte TYPE_QUADTO = (byte) 1;
private static final byte TYPE_CUBICTO = (byte) 2;
- // curves capacity = edges count (4096) = half edges x 2 (coords)
- private static final int INITIAL_CURVES_COUNT = INITIAL_EDGES_COUNT;
+ // curves capacity = edges count (8192) = edges x 2 (coords)
+ private static final int INITIAL_CURVES_COUNT = INITIAL_EDGES_COUNT << 1;
- // types capacity = half edges count (2048)
- private static final int INITIAL_TYPES_COUNT = INITIAL_EDGES_COUNT >> 1;
+ // types capacity = edges count (4096)
+ private static final int INITIAL_TYPES_COUNT = INITIAL_EDGES_COUNT;
float[] curves;
int end;
byte[] curveTypes;
int numCurves;
@@ -1233,14 +1162,14 @@
* @param rdrCtx per-thread renderer context
*/
PolyStack(final RendererContext rdrCtx) {
this.rdrCtx = rdrCtx;
- curves_ref = rdrCtx.newDirtyFloatArrayRef(INITIAL_CURVES_COUNT); // 16K
+ curves_ref = rdrCtx.newDirtyFloatArrayRef(INITIAL_CURVES_COUNT); // 32K
curves = curves_ref.initial;
- curveTypes_ref = rdrCtx.newDirtyByteArrayRef(INITIAL_TYPES_COUNT); // 2K
+ curveTypes_ref = rdrCtx.newDirtyByteArrayRef(INITIAL_TYPES_COUNT); // 4K
curveTypes = curveTypes_ref.initial;
numCurves = 0;
end = 0;
if (DO_STATS) {
@@ -1367,11 +1296,11 @@
@Override
public String toString() {
String ret = "";
int nc = numCurves;
- int e = end;
+ int last = end;
int len;
while (nc != 0) {
switch(curveTypes[--nc]) {
case TYPE_LINETO:
len = 2;
@@ -1386,12 +1315,12 @@
ret += "cubic: ";
break;
default:
len = 0;
}
- e -= len;
- ret += Arrays.toString(Arrays.copyOfRange(curves, e, e+len))
+ last -= len;
+ ret += Arrays.toString(Arrays.copyOfRange(curves, last, last+len))
+ "\n";
}
return ret;
}
}
< prev index next >