--- old/modules/javafx.graphics/src/main/java/com/sun/marlin/Dasher.java 2016-11-30 22:45:11.802404000 +0100
+++ /dev/null 2016-11-30 21:27:13.355352085 +0100
@@ -1,743 +0,0 @@
-/*
- * Copyright (c) 2007, 2016, Oracle and/or its affiliates. All rights reserved.
- * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
- *
- * This code is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 only, as
- * published by the Free Software Foundation. Oracle designates this
- * particular file as subject to the "Classpath" exception as provided
- * by Oracle in the LICENSE file that accompanied this code.
- *
- * This code is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * version 2 for more details (a copy is included in the LICENSE file that
- * accompanied this code).
- *
- * You should have received a copy of the GNU General Public License version
- * 2 along with this work; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
- * or visit www.oracle.com if you need additional information or have any
- * questions.
- */
-
-package com.sun.marlin;
-
-import java.util.Arrays;
-import com.sun.javafx.geom.PathConsumer2D;
-
-/**
- * The Dasher
class takes a series of linear commands
- * (moveTo
, lineTo
, close
and
- * end
) and breaks them into smaller segments according to a
- * dash pattern array and a starting dash phase.
- *
- *
Issues: in J2Se, a zero length dash segment as drawn as a very
- * short dash, whereas Pisces does not draw anything. The PostScript
- * semantics are unclear.
- *
- */
-public final class Dasher implements PathConsumer2D, MarlinConst {
-
- static final int REC_LIMIT = 4;
- static final float ERR = 0.01f;
- static final float MIN_T_INC = 1f / (1 << REC_LIMIT);
-
- // More than 24 bits of mantissa means we can no longer accurately
- // measure the number of times cycled through the dash array so we
- // punt and override the phase to just be 0 past that point.
- static final float MAX_CYCLES = 16000000f;
-
- private PathConsumer2D out;
- private float[] dash;
- private int dashLen;
- private float startPhase;
- private boolean startDashOn;
- private int startIdx;
-
- private boolean starting;
- private boolean needsMoveTo;
-
- private int idx;
- private boolean dashOn;
- private float phase;
-
- private float sx, sy;
- private float x0, y0;
-
- // temporary storage for the current curve
- private final float[] curCurvepts;
-
- // per-thread renderer context
- final RendererContext rdrCtx;
-
- // flag to recycle dash array copy
- boolean recycleDashes;
-
- // dashes ref (dirty)
- final FloatArrayCache.Reference dashes_ref;
- // firstSegmentsBuffer ref (dirty)
- final FloatArrayCache.Reference firstSegmentsBuffer_ref;
-
- /**
- * Constructs a Issues: in J2Se, a zero length dash segment as drawn as a very
+ * short dash, whereas Pisces does not draw anything. The PostScript
+ * semantics are unclear.
+ *
+ */
+public final class DDasher implements DPathConsumer2D, MarlinConst {
+
+ static final int REC_LIMIT = 4;
+ static final double ERR = 0.01D;
+ static final double MIN_T_INC = 1D / (1 << REC_LIMIT);
+
+ // More than 24 bits of mantissa means we can no longer accurately
+ // measure the number of times cycled through the dash array so we
+ // punt and override the phase to just be 0 past that point.
+ static final double MAX_CYCLES = 16000000D;
+
+ private DPathConsumer2D out;
+ private double[] dash;
+ private int dashLen;
+ private double startPhase;
+ private boolean startDashOn;
+ private int startIdx;
+
+ private boolean starting;
+ private boolean needsMoveTo;
+
+ private int idx;
+ private boolean dashOn;
+ private double phase;
+
+ private double sx, sy;
+ private double x0, y0;
+
+ // temporary storage for the current curve
+ private final double[] curDCurvepts;
+
+ // per-thread renderer context
+ final DRendererContext rdrCtx;
+
+ // flag to recycle dash array copy
+ boolean recycleDashes;
+
+ // dashes ref (dirty)
+ final DoubleArrayCache.Reference dashes_ref;
+ // firstSegmentsBuffer ref (dirty)
+ final DoubleArrayCache.Reference firstSegmentsBuffer_ref;
+
+ /**
+ * Constructs a Dasher
.
- * @param rdrCtx per-thread renderer context
- */
- Dasher(final RendererContext rdrCtx) {
- this.rdrCtx = rdrCtx;
-
- dashes_ref = rdrCtx.newDirtyFloatArrayRef(INITIAL_ARRAY); // 1K
-
- firstSegmentsBuffer_ref = rdrCtx.newDirtyFloatArrayRef(INITIAL_ARRAY); // 1K
- firstSegmentsBuffer = firstSegmentsBuffer_ref.initial;
-
- // we need curCurvepts to be able to contain 2 curves because when
- // dashing curves, we need to subdivide it
- curCurvepts = new float[8 * 2];
- }
-
- /**
- * Initialize the Dasher
.
- *
- * @param out an output PathConsumer2D
.
- * @param dash an array of float
s containing the dash pattern
- * @param dashLen length of the given dash array
- * @param phase a float
containing the dash phase
- * @param recycleDashes true to indicate to recycle the given dash array
- * @return this instance
- */
- public Dasher init(final PathConsumer2D out, float[] dash, int dashLen,
- float phase, boolean recycleDashes)
- {
- this.out = out;
-
- // Normalize so 0 <= phase < dash[0]
- int sidx = 0;
- dashOn = true;
- float sum = 0f;
- for (float d : dash) {
- sum += d;
- }
- float cycles = phase / sum;
- if (phase < 0f) {
- if (-cycles >= MAX_CYCLES) {
- phase = 0f;
- } else {
- int fullcycles = FloatMath.floor_int(-cycles);
- if ((fullcycles & dash.length & 1) != 0) {
- dashOn = !dashOn;
- }
- phase += fullcycles * sum;
- while (phase < 0f) {
- if (--sidx < 0) {
- sidx = dash.length - 1;
- }
- phase += dash[sidx];
- dashOn = !dashOn;
- }
- }
- } else if (phase > 0) {
- if (cycles >= MAX_CYCLES) {
- phase = 0f;
- } else {
- int fullcycles = FloatMath.floor_int(cycles);
- if ((fullcycles & dash.length & 1) != 0) {
- dashOn = !dashOn;
- }
- phase -= fullcycles * sum;
- float d;
- while (phase >= (d = dash[sidx])) {
- phase -= d;
- sidx = (sidx + 1) % dash.length;
- dashOn = !dashOn;
- }
- }
- }
-
- this.dash = dash;
- this.dashLen = dashLen;
- this.startPhase = this.phase = phase;
- this.startDashOn = dashOn;
- this.startIdx = sidx;
- this.starting = true;
- needsMoveTo = false;
- firstSegidx = 0;
-
- this.recycleDashes = recycleDashes;
-
- return this; // fluent API
- }
-
- /**
- * Disposes this dasher:
- * clean up before reusing this instance
- */
- void dispose() {
- if (DO_CLEAN_DIRTY) {
- // Force zero-fill dirty arrays:
- Arrays.fill(curCurvepts, 0f);
- }
- // Return arrays:
- if (recycleDashes) {
- dash = dashes_ref.putArray(dash);
- }
- firstSegmentsBuffer = firstSegmentsBuffer_ref.putArray(firstSegmentsBuffer);
- }
-
- public float[] copyDashArray(final float[] dashes) {
- final int len = dashes.length;
- final float[] newDashes;
- if (len <= MarlinConst.INITIAL_ARRAY) {
- newDashes = rdrCtx.dasher.dashes_ref.initial;
- } else {
- if (DO_STATS) {
- rdrCtx.stats.stat_array_dasher_dasher.add(len);
- }
- newDashes = rdrCtx.dasher.dashes_ref.getArray(len);
- }
- System.arraycopy(dashes, 0, newDashes, 0, len);
- return newDashes;
- }
-
- @Override
- public void moveTo(float x0, float y0) {
- if (firstSegidx > 0) {
- out.moveTo(sx, sy);
- emitFirstSegments();
- }
- needsMoveTo = true;
- this.idx = startIdx;
- this.dashOn = this.startDashOn;
- this.phase = this.startPhase;
- this.sx = this.x0 = x0;
- this.sy = this.y0 = y0;
- this.starting = true;
- }
-
- private void emitSeg(float[] buf, int off, int type) {
- switch (type) {
- case 8:
- out.curveTo(buf[off+0], buf[off+1],
- buf[off+2], buf[off+3],
- buf[off+4], buf[off+5]);
- return;
- case 6:
- out.quadTo(buf[off+0], buf[off+1],
- buf[off+2], buf[off+3]);
- return;
- case 4:
- out.lineTo(buf[off], buf[off+1]);
- return;
- default:
- }
- }
-
- private void emitFirstSegments() {
- final float[] fSegBuf = firstSegmentsBuffer;
-
- for (int i = 0; i < firstSegidx; ) {
- int type = (int)fSegBuf[i];
- emitSeg(fSegBuf, i + 1, type);
- i += (type - 1);
- }
- firstSegidx = 0;
- }
- // We don't emit the first dash right away. If we did, caps would be
- // drawn on it, but we need joins to be drawn if there's a closePath()
- // So, we store the path elements that make up the first dash in the
- // buffer below.
- private float[] firstSegmentsBuffer; // dynamic array
- private int firstSegidx;
-
- // precondition: pts must be in relative coordinates (relative to x0,y0)
- // fullCurve is true iff the curve in pts has not been split.
- private void goTo(float[] pts, int off, final int type) {
- float x = pts[off + type - 4];
- float y = pts[off + type - 3];
- if (dashOn) {
- if (starting) {
- int len = type - 1; // - 2 + 1
- int segIdx = firstSegidx;
- float[] buf = firstSegmentsBuffer;
- if (segIdx + len > buf.length) {
- if (DO_STATS) {
- rdrCtx.stats.stat_array_dasher_firstSegmentsBuffer
- .add(segIdx + len);
- }
- firstSegmentsBuffer = buf
- = firstSegmentsBuffer_ref.widenArray(buf, segIdx,
- segIdx + len);
- }
- buf[segIdx++] = type;
- len--;
- // small arraycopy (2, 4 or 6) but with offset:
- System.arraycopy(pts, off, buf, segIdx, len);
- segIdx += len;
- firstSegidx = segIdx;
- } else {
- if (needsMoveTo) {
- out.moveTo(x0, y0);
- needsMoveTo = false;
- }
- emitSeg(pts, off, type);
- }
- } else {
- starting = false;
- needsMoveTo = true;
- }
- this.x0 = x;
- this.y0 = y;
- }
-
- @Override
- public void lineTo(float x1, float y1) {
- float dx = x1 - x0;
- float dy = y1 - y0;
-
- float len = dx*dx + dy*dy;
- if (len == 0f) {
- return;
- }
- len = (float) Math.sqrt(len);
-
- // The scaling factors needed to get the dx and dy of the
- // transformed dash segments.
- final float cx = dx / len;
- final float cy = dy / len;
-
- final float[] _curCurvepts = curCurvepts;
- final float[] _dash = dash;
-
- float leftInThisDashSegment;
- float dashdx, dashdy, p;
-
- while (true) {
- leftInThisDashSegment = _dash[idx] - phase;
-
- if (len <= leftInThisDashSegment) {
- _curCurvepts[0] = x1;
- _curCurvepts[1] = y1;
- goTo(_curCurvepts, 0, 4);
-
- // Advance phase within current dash segment
- phase += len;
- // TODO: compare float values using epsilon:
- if (len == leftInThisDashSegment) {
- phase = 0f;
- idx = (idx + 1) % dashLen;
- dashOn = !dashOn;
- }
- return;
- }
-
- dashdx = _dash[idx] * cx;
- dashdy = _dash[idx] * cy;
-
- if (phase == 0f) {
- _curCurvepts[0] = x0 + dashdx;
- _curCurvepts[1] = y0 + dashdy;
- } else {
- p = leftInThisDashSegment / _dash[idx];
- _curCurvepts[0] = x0 + p * dashdx;
- _curCurvepts[1] = y0 + p * dashdy;
- }
-
- goTo(_curCurvepts, 0, 4);
-
- len -= leftInThisDashSegment;
- // Advance to next dash segment
- idx = (idx + 1) % dashLen;
- dashOn = !dashOn;
- phase = 0f;
- }
- }
-
- // shared instance in Dasher
- private final LengthIterator li = new LengthIterator();
-
- // preconditions: curCurvepts must be an array of length at least 2 * type,
- // that contains the curve we want to dash in the first type elements
- private void somethingTo(int type) {
- if (pointCurve(curCurvepts, type)) {
- return;
- }
- li.initializeIterationOnCurve(curCurvepts, type);
-
- // initially the current curve is at curCurvepts[0...type]
- int curCurveoff = 0;
- float lastSplitT = 0f;
- float t;
- float leftInThisDashSegment = dash[idx] - phase;
-
- while ((t = li.next(leftInThisDashSegment)) < 1f) {
- if (t != 0f) {
- Helpers.subdivideAt((t - lastSplitT) / (1f - lastSplitT),
- curCurvepts, curCurveoff,
- curCurvepts, 0,
- curCurvepts, type, type);
- lastSplitT = t;
- goTo(curCurvepts, 2, type);
- curCurveoff = type;
- }
- // Advance to next dash segment
- idx = (idx + 1) % dashLen;
- dashOn = !dashOn;
- phase = 0f;
- leftInThisDashSegment = dash[idx];
- }
- goTo(curCurvepts, curCurveoff+2, type);
- phase += li.lastSegLen();
- if (phase >= dash[idx]) {
- phase = 0f;
- idx = (idx + 1) % dashLen;
- dashOn = !dashOn;
- }
- // reset LengthIterator:
- li.reset();
- }
-
- private static boolean pointCurve(float[] curve, int type) {
- for (int i = 2; i < type; i++) {
- if (curve[i] != curve[i-2]) {
- return false;
- }
- }
- return true;
- }
-
- // Objects of this class are used to iterate through curves. They return
- // t values where the left side of the curve has a specified length.
- // It does this by subdividing the input curve until a certain error
- // condition has been met. A recursive subdivision procedure would
- // return as many as 1<DDasher
class takes a series of linear commands
+ * (moveTo
, lineTo
, close
and
+ * end
) and breaks them into smaller segments according to a
+ * dash pattern array and a starting dash phase.
+ *
+ * DDasher
.
+ * @param rdrCtx per-thread renderer context
+ */
+ DDasher(final DRendererContext rdrCtx) {
+ this.rdrCtx = rdrCtx;
+
+ dashes_ref = rdrCtx.newDirtyDoubleArrayRef(INITIAL_ARRAY); // 1K
+
+ firstSegmentsBuffer_ref = rdrCtx.newDirtyDoubleArrayRef(INITIAL_ARRAY); // 1K
+ firstSegmentsBuffer = firstSegmentsBuffer_ref.initial;
+
+ // we need curDCurvepts to be able to contain 2 curves because when
+ // dashing curves, we need to subdivide it
+ curDCurvepts = new double[8 * 2];
+ }
+
+ /**
+ * Initialize the DDasher
.
+ *
+ * @param out an output DPathConsumer2D
.
+ * @param dash an array of double
s containing the dash pattern
+ * @param dashLen length of the given dash array
+ * @param phase a double
containing the dash phase
+ * @param recycleDashes true to indicate to recycle the given dash array
+ * @return this instance
+ */
+ public DDasher init(final DPathConsumer2D out, double[] dash, int dashLen,
+ double phase, boolean recycleDashes)
+ {
+ this.out = out;
+
+ // Normalize so 0 <= phase < dash[0]
+ int sidx = 0;
+ dashOn = true;
+ double sum = 0D;
+ for (double d : dash) {
+ sum += d;
+ }
+ double cycles = phase / sum;
+ if (phase < 0D) {
+ if (-cycles >= MAX_CYCLES) {
+ phase = 0D;
+ } else {
+ int fullcycles = FloatMath.floor_int(-cycles);
+ if ((fullcycles & dash.length & 1) != 0) {
+ dashOn = !dashOn;
+ }
+ phase += fullcycles * sum;
+ while (phase < 0D) {
+ if (--sidx < 0) {
+ sidx = dash.length - 1;
+ }
+ phase += dash[sidx];
+ dashOn = !dashOn;
+ }
+ }
+ } else if (phase > 0) {
+ if (cycles >= MAX_CYCLES) {
+ phase = 0D;
+ } else {
+ int fullcycles = FloatMath.floor_int(cycles);
+ if ((fullcycles & dash.length & 1) != 0) {
+ dashOn = !dashOn;
+ }
+ phase -= fullcycles * sum;
+ double d;
+ while (phase >= (d = dash[sidx])) {
+ phase -= d;
+ sidx = (sidx + 1) % dash.length;
+ dashOn = !dashOn;
+ }
+ }
+ }
+
+ this.dash = dash;
+ this.dashLen = dashLen;
+ this.startPhase = this.phase = phase;
+ this.startDashOn = dashOn;
+ this.startIdx = sidx;
+ this.starting = true;
+ needsMoveTo = false;
+ firstSegidx = 0;
+
+ this.recycleDashes = recycleDashes;
+
+ return this; // fluent API
+ }
+
+ /**
+ * Disposes this dasher:
+ * clean up before reusing this instance
+ */
+ void dispose() {
+ if (DO_CLEAN_DIRTY) {
+ // Force zero-fill dirty arrays:
+ Arrays.fill(curDCurvepts, 0D);
+ }
+ // Return arrays:
+ if (recycleDashes) {
+ dash = dashes_ref.putArray(dash);
+ }
+ firstSegmentsBuffer = firstSegmentsBuffer_ref.putArray(firstSegmentsBuffer);
+ }
+
+ public double[] copyDashArray(final float[] dashes) {
+ final int len = dashes.length;
+ final double[] newDashes;
+ if (len <= MarlinConst.INITIAL_ARRAY) {
+ newDashes = dashes_ref.initial;
+ } else {
+ if (DO_STATS) {
+ rdrCtx.stats.stat_array_dasher_dasher.add(len);
+ }
+ newDashes = dashes_ref.getArray(len);
+ }
+ for (int i = 0; i < len; i++) {
+ newDashes[i] = dashes[i];
+ }
+ return newDashes;
+ }
+
+ @Override
+ public void moveTo(double x0, double y0) {
+ if (firstSegidx > 0) {
+ out.moveTo(sx, sy);
+ emitFirstSegments();
+ }
+ needsMoveTo = true;
+ this.idx = startIdx;
+ this.dashOn = this.startDashOn;
+ this.phase = this.startPhase;
+ this.sx = this.x0 = x0;
+ this.sy = this.y0 = y0;
+ this.starting = true;
+ }
+
+ private void emitSeg(double[] buf, int off, int type) {
+ switch (type) {
+ case 8:
+ out.curveTo(buf[off+0], buf[off+1],
+ buf[off+2], buf[off+3],
+ buf[off+4], buf[off+5]);
+ return;
+ case 6:
+ out.quadTo(buf[off+0], buf[off+1],
+ buf[off+2], buf[off+3]);
+ return;
+ case 4:
+ out.lineTo(buf[off], buf[off+1]);
+ return;
+ default:
+ }
+ }
+
+ private void emitFirstSegments() {
+ final double[] fSegBuf = firstSegmentsBuffer;
+
+ for (int i = 0; i < firstSegidx; ) {
+ int type = (int)fSegBuf[i];
+ emitSeg(fSegBuf, i + 1, type);
+ i += (type - 1);
+ }
+ firstSegidx = 0;
+ }
+ // We don't emit the first dash right away. If we did, caps would be
+ // drawn on it, but we need joins to be drawn if there's a closePath()
+ // So, we store the path elements that make up the first dash in the
+ // buffer below.
+ private double[] firstSegmentsBuffer; // dynamic array
+ private int firstSegidx;
+
+ // precondition: pts must be in relative coordinates (relative to x0,y0)
+ // fullDCurve is true iff the curve in pts has not been split.
+ private void goTo(double[] pts, int off, final int type) {
+ double x = pts[off + type - 4];
+ double y = pts[off + type - 3];
+ if (dashOn) {
+ if (starting) {
+ int len = type - 1; // - 2 + 1
+ int segIdx = firstSegidx;
+ double[] buf = firstSegmentsBuffer;
+ if (segIdx + len > buf.length) {
+ if (DO_STATS) {
+ rdrCtx.stats.stat_array_dasher_firstSegmentsBuffer
+ .add(segIdx + len);
+ }
+ firstSegmentsBuffer = buf
+ = firstSegmentsBuffer_ref.widenArray(buf, segIdx,
+ segIdx + len);
+ }
+ buf[segIdx++] = type;
+ len--;
+ // small arraycopy (2, 4 or 6) but with offset:
+ System.arraycopy(pts, off, buf, segIdx, len);
+ segIdx += len;
+ firstSegidx = segIdx;
+ } else {
+ if (needsMoveTo) {
+ out.moveTo(x0, y0);
+ needsMoveTo = false;
+ }
+ emitSeg(pts, off, type);
+ }
+ } else {
+ starting = false;
+ needsMoveTo = true;
+ }
+ this.x0 = x;
+ this.y0 = y;
+ }
+
+ @Override
+ public void lineTo(double x1, double y1) {
+ double dx = x1 - x0;
+ double dy = y1 - y0;
+
+ double len = dx*dx + dy*dy;
+ if (len == 0D) {
+ return;
+ }
+ len = Math.sqrt(len);
+
+ // The scaling factors needed to get the dx and dy of the
+ // transformed dash segments.
+ final double cx = dx / len;
+ final double cy = dy / len;
+
+ final double[] _curDCurvepts = curDCurvepts;
+ final double[] _dash = dash;
+
+ double leftInThisDashSegment;
+ double dashdx, dashdy, p;
+
+ while (true) {
+ leftInThisDashSegment = _dash[idx] - phase;
+
+ if (len <= leftInThisDashSegment) {
+ _curDCurvepts[0] = x1;
+ _curDCurvepts[1] = y1;
+ goTo(_curDCurvepts, 0, 4);
+
+ // Advance phase within current dash segment
+ phase += len;
+ // TODO: compare double values using epsilon:
+ if (len == leftInThisDashSegment) {
+ phase = 0D;
+ idx = (idx + 1) % dashLen;
+ dashOn = !dashOn;
+ }
+ return;
+ }
+
+ dashdx = _dash[idx] * cx;
+ dashdy = _dash[idx] * cy;
+
+ if (phase == 0D) {
+ _curDCurvepts[0] = x0 + dashdx;
+ _curDCurvepts[1] = y0 + dashdy;
+ } else {
+ p = leftInThisDashSegment / _dash[idx];
+ _curDCurvepts[0] = x0 + p * dashdx;
+ _curDCurvepts[1] = y0 + p * dashdy;
+ }
+
+ goTo(_curDCurvepts, 0, 4);
+
+ len -= leftInThisDashSegment;
+ // Advance to next dash segment
+ idx = (idx + 1) % dashLen;
+ dashOn = !dashOn;
+ phase = 0D;
+ }
+ }
+
+ // shared instance in DDasher
+ private final LengthIterator li = new LengthIterator();
+
+ // preconditions: curDCurvepts must be an array of length at least 2 * type,
+ // that contains the curve we want to dash in the first type elements
+ private void somethingTo(int type) {
+ if (pointDCurve(curDCurvepts, type)) {
+ return;
+ }
+ li.initializeIterationOnDCurve(curDCurvepts, type);
+
+ // initially the current curve is at curDCurvepts[0...type]
+ int curDCurveoff = 0;
+ double lastSplitT = 0D;
+ double t;
+ double leftInThisDashSegment = dash[idx] - phase;
+
+ while ((t = li.next(leftInThisDashSegment)) < 1D) {
+ if (t != 0D) {
+ DHelpers.subdivideAt((t - lastSplitT) / (1D - lastSplitT),
+ curDCurvepts, curDCurveoff,
+ curDCurvepts, 0,
+ curDCurvepts, type, type);
+ lastSplitT = t;
+ goTo(curDCurvepts, 2, type);
+ curDCurveoff = type;
+ }
+ // Advance to next dash segment
+ idx = (idx + 1) % dashLen;
+ dashOn = !dashOn;
+ phase = 0D;
+ leftInThisDashSegment = dash[idx];
+ }
+ goTo(curDCurvepts, curDCurveoff+2, type);
+ phase += li.lastSegLen();
+ if (phase >= dash[idx]) {
+ phase = 0D;
+ idx = (idx + 1) % dashLen;
+ dashOn = !dashOn;
+ }
+ // reset LengthIterator:
+ li.reset();
+ }
+
+ private static boolean pointDCurve(double[] curve, int type) {
+ for (int i = 2; i < type; i++) {
+ if (curve[i] != curve[i-2]) {
+ return false;
+ }
+ }
+ return true;
+ }
+
+ // Objects of this class are used to iterate through curves. They return
+ // t values where the left side of the curve has a specified length.
+ // It does this by subdividing the input curve until a certain error
+ // condition has been met. A recursive subdivision procedure would
+ // return as many as 1<