1 #
2 # Copyright (c) 2005, 2012, Oracle and/or its affiliates. All rights reserved.
3 # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
4 #
5 # This code is free software; you can redistribute it and/or modify it
6 # under the terms of the GNU General Public License version 2 only, as
7 # published by the Free Software Foundation. Oracle designates this
8 # particular file as subject to the "Classpath" exception as provided
9 # by Oracle in the LICENSE file that accompanied this code.
10 #
11 # This code is distributed in the hope that it will be useful, but WITHOUT
12 # ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
13 # FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
14 # version 2 for more details (a copy is included in the LICENSE file that
15 # accompanied this code).
16 #
17 # You should have received a copy of the GNU General Public License version
18 # 2 along with this work; if not, write to the Free Software Foundation,
19 # Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
20 #
21 # Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
22 # or visit www.oracle.com if you need additional information or have any
23 # questions.
24 #
25
26 # general
27 # Wrapped into an Exception. {0} - localizable exception message of another exception
28 modeler.nestedModelError=modeler error: {0}
29
30
31 # WSDLModeler
32 # Usage not found. TODO Remove
33 #wsdlmodeler.multipleOutputParameters=multiple \"out\" parameters in operation: {0}
34 wsdlmodeler.invalidOperation=invalid operation: {0}
35 wsdlmodeler.invalidState.modelingOperation=invalid state while modeling operation: {0}
36 wsdlmodeler.resultIsInOutParameter=result is \"inout\" parameter in operation: {0}
37 wsdlmodeler.invalid.parameterorder.parameter=\"{0}\" specified in the parameterOrder attribute of operation \"{1}\" is not a valid part of the message.
38 wsdlmodeler.invalid.parameterOrder.tooManyUnmentionedParts=more than one part left out in the parameterOrder attribute of operation \"{0}\"
39 wsdlmodeler.invalid.parameterOrder.invalidParameterOrder=parameterOrder attribute on operation \"{0}\" is invalid, ignoring parameterOrder hint
40 wsdlmodeler.invalid.parameter.differentTypes=parameter \"{0}\" of operation \"{1}\" appears with different types in the input and output messages
41 wsdlmodeler.invalid.bindingOperation.notInPortType=in binding \"{1}\", operation \"{0}\" does not appear in the corresponding port type
42 # Not concatenated with any other string.
43 wsdlmodeler.invalid.bindingOperation.inputMissingSoapBody=input message of binding operation \"{0}\" does not have a SOAP body extension
44 # Not concatenated with any other string.
45 wsdlmodeler.invalid.bindingOperation.outputMissingSoapBody=output message of binding operation \"{0}\" does not have a SOAP body extension
46 # Not concatenated with any other string.
47 wsdlmodeler.invalid.bindingOperation.missingInputName=binding operation \"{0}\" must specify a name for its input message
48 # Not concatenated with any other string.
49 wsdlmodeler.invalid.bindingOperation.missingOutputName=binding operation \"{0}\" must specify a name for its output message
50 wsdlmodeler.invalid.bindingOperation.multipleMatchingOperations=in binding \"{1}\", operation \"{0}\" does not reference a unique operation in the corresponding port type
51 wsdlmodeler.invalid.bindingOperation.notFound=in binding \"{1}\", operation \"{0}\" does not match any operation in the corresponding port type
52 # Not concatenated with any other string.
53 wsdlmodeler.invalid.bindingOperation.inputSoapBody.missingNamespace=input message of binding operation \"{0}\" must specify a value for the \"namespace\" attribute
54 # Not concatenated with any other string.
55 wsdlmodeler.invalid.bindingOperation.outputSoapBody.missingNamespace=output message of binding operation \"{0}\" must specify a value for the \"namespace\" attribute
56 wsdlmodeler.invalid.bindingOperation.inputHeader.missingNamespace=input header \"{1}\" of binding operation \"{0}\" must specify a value for the \"namespace\" attribute
57 wsdlmodeler.invalid.bindingOperation.outputHeader.missingNamespace=output header \"{1}\" of binding operation \"{0}\" must specify a value for the \"namespace\" attribute
58 # Not concatenated with any other string.
59 wsdlmodeler.invalid.bindingFault.notUnique=fault \"{0}\" in operation \"{1}\" matches more than one fault in the corresponding port type operation
60 # Not concatenated with any other string.
61 wsdlmodeler.invalid.bindingFault.notFound=fault \"{0}\" in operation \"{1}\" does not match any fault in the corresponding port type operation
62 # Not concatenated with any other string.
63 wsdlmodeler.invalid.portTypeFault.notFound=fault \"{0}\" in portType operation \"{1}\" does not match any fault in the corresponding binding operation
64 # Not concatenated with any other string.
65 wsdlmodeler.invalid.bindingFault.outputMissingSoapFault=fault \"{0}\" in operation \"{1}\" does not have a SOAP fault extension
66 # Not concatenated with any other string.
67 wsdlmodeler.invalid.bindingFault.missingName=fault \"{0}\" in operation \"{1}\" must specify a value for the \"name\" attribute
68 # Not concatenated with any other string.
69 wsdlmodeler.invalid.bindingFault.missingNamespace=fault \"{0}\" in operation \"{1}\" must specify a value for the \"namespace\" attribute
70 wsdlmodeler.invalid.bindingFault.emptyMessage=fault \"{0}\" refers to message \"{1}\", but the message has no parts
71 wsdlmodeler.invalid.bindingFault.messageHasMoreThanOnePart=fault \"{0}\" refers to message \"{1}\", but the message has more than one parts
72 # Usage not found. TODO Remove
73 #wsdlmodeler.invalid.message.partMustHaveTypeDescriptor=in message \"{0}\", part \"{1}\" must specify a \"type\" attribute
74 # Not concatenated with any other string.
75 wsdlmodeler.invalid.message.partMustHaveElementDescriptor=in message \"{0}\", part \"{1}\" must specify a \"element\" attribute
76 # Usage not found. TODO Remove
77 #wsdlmodeler.invalid=invalid WSDL document
78 wsdlmodeler.unsolvableNamingConflicts=the following naming conflicts occurred: {0}
79 #
80 wsdlmodeler.warning.ignoringUnrecognizedSchemaExtension=ignoring schema element (unsupported version): {0}
81 wsdlmodeler.warning.searchSchema.unrecognizedTypes=encountered {0} unrecognized type(s)
82 wsdlmodeler.warning.noServiceDefinitionsFound=WSDL document does not define any services
83 wsdlmodeler.warning.noPortsInService=Service \"{0}\" does not contain any usable ports. try running wsimport with -extension switch.
84 wsdlmodeler.warning.noOperationsInPort=Port \"{0}\" does not contain any usable operations
85 wsdlmodeler.warning.ignoringNonSOAPPort=ignoring port \"{0}\": not a standard SOAP port. try running wsimport with -extension switch.
86 # Not concatenated with any other string.
87 wsdlmodeler.warning.nonSOAPPort=port \"{0}\": not a standard SOAP port. The generated artifacts may not work with JAX-WS runtime.
88 wsdlmodeler.warning.ignoringNonSOAPPort.noAddress=ignoring port \"{0}\": no SOAP address specified. try running wsimport with -extension switch.
89 # Not concatenated with any other string.
90 wsdlmodeler.warning.noSOAPAddress=Port \"{0}\" is not a SOAP port, it has no soap:address
91 wsdlmodeler.warning.ignoringSOAPBinding.nonHTTPTransport:ignoring SOAP port \"{0}\": unrecognized transport. try running wsimport with -extension switch.
92
93 #BP1.1 R2705
94 wsdlmodeler.warning.ignoringSOAPBinding.mixedStyle=ignoring port \"{0}\", its not WS-I BP 1.1 compliant: the wsdl binding has mixed style, it must be rpc-literal or document-literal operation. try running wsimport with -extension switch.
95 # Not concatenated with any other string.
96 wsdlmodeler.warning.port.SOAPBinding.mixedStyle=not a WS-I BP1.1 compliant SOAP port \"{0}\": the WSDL binding has mixed style, it must be rpc-literal or document-literal operation!
97
98 wsdlmodeler.warning.ignoringOperation.notSupportedStyle=ignoring operation \"{0}\": not request-response or one-way
99 wsdlmodeler.invalid.operation.notSupportedStyle=Invalid WSDL, wsdl:operation \"{0}\" in wsdl:portType \"{1}\": not request-response or one-way
100 wsdlmodeler.warning.ignoringOperation.notEncoded=ignoring RPC-style operation \"{0}\": parameters are not encoded
101 wsdlmodeler.warning.ignoringOperation.cannotHandleBodyPartsAttribute=ignoring operation \"{0}\": cannot handle \"parts\" attribute of \"soap:body\" element
102
103 wsdlmodeler.warning.ignoringOperation.cannotHandleTypeMessagePart=ignoring operation \"{0}\": message part does not refer to a schema element declaration
104 wsdlmodeler.invalid.doclitoperation=Invalid wsdl:operation \"{0}\": its a document-literal operation, message part must refer to a schema element declaration
105
106 wsdlmodeler.warning.ignoringOperation.cannotHandleElementMessagePart=ignoring operation \"{0}\": message part does not refer to a schema type declaration
107 wsdlmodeler.invalid.rpclitoperation=Invalid wsdl:operation \"{0}\": its a rpc-literal operation, message part must refer to a schema type declaration
108
109 wsdlmodeler.invalid.ignoringMemberSubmissionAddressing=ignoring wsa:Action attribute since obsolete addressing version 08-2004:\"{0}\" used; expecting addressing version \"{1}\". To use version 08-2004 anyway run wsimport with -extension switch.
110 wsdlmodeler.warning.memberSubmissionAddressingUsed=obsolete addressing version 08-2004:\"{0}\" used; version \"{1}\" should be used instead.
111
112 wsdlmodeler.warning.ignoringOperation.cannotHandleDocumentStyle=ignoring operation \"{0}\": cannot handle document-style operations
113 wsdlmodeler.warning.bindingOperation.multiplePartBinding=Check the abstract operation \"{0}\" binding, part \"{1}\" has multiple binding. Will try to generated artifacts anyway...
114 wsdlmodeler.invalid.bindingOperation.multiplePartBinding=abstract operation \"{0}\" binding, part \"{1}\" has multiple binding.
115 wsdlmodeler.warning.ignoringFaults=ignoring faults declared by operation \"{0}\"
116 wsdlmodeler.warning.ignoringFault.notEncoded=ignoring literal fault \"{0}\" of binding operation \"{1}\"
117 wsdlmodeler.warning.ignoringFault.notLiteral=ignoring encoded fault \"{0}\" of binding operation \"{1}\"
118 wsdlmodeler.invalid.operation.fault.notLiteral=ignoring encoded fault \"{0}\" in literal binding operation \"{1}\"
119 wsdlmodeler.warning.ignoringHeader=ignoring header \"{0}\" of binding operation \"{1}\"
120 wsdlmodeler.warning.ignoringHeader.partFromBody=header part: \"{0}\" already bound by soapbind:body, illegal to bind the part twice
121 wsdlmodeler.warning.ignoringHeader.notLiteral=ignoring header \"{0}\" of binding operation \"{1}\": not literal
122 wsdlmodeler.invalid.header.notLiteral=Invalid header \"{0}\" of binding operation \"{1}\": not literal
123 wsdlmodeler.warning.ignoringHeader.notFound=ignoring header \"{0}\" of binding operation \"{1}\": not found
124 # Not concatenated with any other string.
125 wsdlmodeler.invalid.header.notFound=header \"{0}\" of binding operation \"{1}\": not found
126 wsdlmodeler.warning.ignoringHeader.cant.resolve.message=ignoring header \"{0}\" of binding operation \"{1}\": cannot resolve message
127 # Not concatenated with any other string.
128 wsdlmodeler.invalid.header.cant.resolve.message=header \"{0}\" of binding operation \"{1}\": cannot resolve message
129
130 wsdlmodeler.warning.ignoringFault.cant.resolve.message=ignoring fault \"{0}\" of binding operation \"{1}\": cannot resolve message
131 wsdlmodeler.invalid.fault.cant.resolve.message=fault message \"{0}\" in binding operation \"{1}\" could not be resolved
132
133 wsdlmodeler.warning.ignoringHeader.notEncoded=ignoring header \"{0}\" of binding operation \"{1}\": not SOAP-encoded
134 wsdlmodeler.warning.ignoringHeader.inconsistentDefinition=ignoring header \"{0}\" of operation \"{1}\": part not found
135 #
136 wsdlmodeler.warning.ignoringOperation.notLiteral=ignoring document-style operation \"{0}\": parameters are not literal
137 wsdlmodeler.warning.ignoringOperation.cannotHandleMoreThanOnePartInInputMessage=ignoring operation \"{0}\": more than one part in input message
138 wsdlmodeler.warning.ignoringOperation.cannotHandleEmptyInputMessage=ignoring operation \"{0}\": input message is empty
139 wsdlmodeler.warning.ignoringOperation.cannotHandleMoreThanOnePartInOutputMessage=ignoring operation \"{0}\": more than one part in output message
140 wsdlmodeler.warning.operation.MoreThanOnePartInMessage=Ignoring operation \"{0}\": more than one part bound to body
141 # Not concatenated with any other string.
142 wsdlmodeler.invalid.operation.MoreThanOnePartInMessage=operation \"{0}\": more than one part bound to body
143 wsdlmodeler.warning.ignoringOperation.cannotHandleEmptyOutputMessage=ignoring operation \"{0}\": output message is empty
144 wsdlmodeler.warning.ignoringOperation.conflictStyleInWSIMode=ignoring operation \"{0}\": binding style and operation style are conflicting
145 wsdlmodeler.warning.ignoringOperation.partNotFound=ignoring operation \"{0}\": part \"{1}\" not found
146 wsdlmodeler.error.partNotFound=part \"{1}\" of operation \"{0}\" could not be resolved!
147 wsdlmodeler.warning.ignoringFault.documentOperation=ignoring fault \"{0}\" of document-style operation \"{1}\"
148 wsdlmodler.warning.operation.use=The WSDL used has operations with literal and encoded use. -f:searchschema is not supported for this scenario.
149 #wsdlmodeler.invalid.bindingFault.wrongSoapFaultName=The name of the SOAP fault extension does not match the name of the \"{0}\" fault in operation \"{1}\"
150 wsdlmodeler.invalid.bindingFault.wrongSoapFaultName=name of soap:fault \"{0}\" doesn''t match the name of wsdl:fault \"{1}\" in operation \"{2}\"
151 #wsdlmodeler.invalid.bindingFault.noSoapFaultName=The name of the SOAP fault extension is missing from the fault \"{0}\" in operation \"{1}\"
152 wsdlmodeler.invalid.bindingFault.noSoapFaultName=soap:fault name not specified, wsdl:fault \"{0}\" in operation \"{1}\"
153
154 wsdlmodeler.duplicate.fault.part.name=ignoring fault \"{0}\" of operation \"{1}\", part name \"{2}\" is not unique
155 wsdlmodeler.duplicate.fault.soap.name=ignoring fault \"{0}\" of operation \"{1}\", soap:fault name \"{2}\" is not unique
156
157 wsdlmodeler.warning.ignoringHeaderFault.notFound=ignoring header fault \"{0}\", cannot find part \"{1}\" in binding \"{2}\"
158 # Usage not found. TODO Remove
159 #wsdlmodeler.headerfault.part.notFound=part \"{1}\" not found for the header fault \"{0}\", in binding \"{2}\"
160
161 wsdlmodeler.warning.ignoringHeaderFault.notLiteral=ignoring header fault part=\"{0}\" message=\"{1}\" of operation {2}, use attribute must be \"literal\"
162
163 wsdlmodeler.warning.ignoringHeaderFault.noElementAttribute=ignoring header fault part=\"{0}\" message=\"{1}\" of operation {2}
164
165 wsdlmodeler.invalid.headerfault.notLiteral=Invalid headerfault \"{0}\" of binding operation \"{1}\": not literal
166 wsdlmodeler.invalid.headerfault.message.partMustHaveElementDescriptor=Invalid headerfault \"{0}\" for header {1} in operation {2}: part must specify an \"element\" attribute
167 wsdlmodeler.invalid.header.message.partMustHaveElementDescriptor=Invalid header \"{0}\" in operation {1}: part must specify a \"element\" attribute
168
169
170 #wsi warnings
171 wsdlmodeler.warning.nonconforming.wsdl.import=Non conforming WS-I WSDL used for wsdl:import
172 wsdlmodeler.warning.nonconforming.wsdl.types=Non conforming WS-I WSDL used for wsdl:types
173 wsdlmodeler.warning.nonconforming.wsdl.use=Processing WS-I non conforming operation \"{0}\" with RPC-Style and SOAP-encoded
174
175 # optional parts
176 # Not concatenated with any other string.
177 wsdlmodeler.error.partsNotFound=parts \"{0}\" not found in the message \"{1}\", wrong WSDL
178
179 # soap 1.2
180 wsdlmodeler.warning.port.SOAPBinding12=SOAP port \"{0}\": uses a non-standard SOAP 1.2 binding.
181 wsdlmodeler.warning.ignoringSOAPBinding12=Ignoring SOAP port \"{0}\": it uses non-standard SOAP 1.2 binding.\nYou must specify the \"-extension\" option to use this binding.
182
183 #WSI-BP1.0 Warning/Errors
184 wsdlmodeler.warning.r2716=R2716 WSI-BasicProfile ver. 1.0, namespace attribute not allowed in doc/lit for {0}: \"{1}\"
185
186 # {0} - "soapbind:header"/"soapbind:fault", {1} - binding operation name / soap fault name e.g.: R2716/R2726 WSI-BasicProfile ver. 1.0, namespace attribute not allowed in doc/lit or rpc/lit for soapbind:fault: "RemoteValidationException"
187 wsdlmodeler.warning.r2716r2726=R2716/R2726 WSI-BasicProfile ver. 1.0, namespace attribute not allowed in doc/lit or rpc/lit for {0}: \"{1}\"
188
189 #WSI-BP 1.1 Warning/Errors
190 # R2911
191 mimemodeler.invalidMimePart.moreThanOneSOAPBody=Ignoring operation \"{0}\". The Multipart/Related structure has invalid root part: more than one soap:body parts found
192
193 # R2906
194 mimemodeler.warning.IgnoringinvalidHeaderPart.notDeclaredInRootPart=Headers not in root mime:part with soap:body, ignoring headers in operation \"{0}\"
195
196 # R2909
197 mimemodeler.invalidMimeContent.differentPart=Ignoring the mime:part. Invalid mime:part, the mime:content has different part attribute.
198
199 mimemodeler.invalidMimeContent.invalidSchemaType=Ignoring the mime:part. mime part: {0} can not be mapped to schema type: {1}
200
201 # Rxxxx A mime:content in a DESCRIPTION MUST refer to a wsdl:part element defined using the type attribute.
202 mimemodeler.invalidMimeContent.mesagePartElementKind=wsdl:part element referenced by mime:content part attribute: {0} must be defined using type attribute!
203
204 # RXXXX RYYYY: In a description, a mime:content element MUST include the part attribute.
205 mimemodeler.invalidMimeContent.missingPartAttribute=Ignoring operation \"{0}\", missing part attribute in mime:content. part attribute must be present in mime:content declaration.
206
207 mimemodeler.invalidMimeContent.missingTypeAttribute=Missing type attribute in mime:content in operation \"{0}\". part attribute must be present in mime:content declaration.
208
209 # unknown schematype
210 mimemodeler.invalidMimeContent.unknownSchemaType=Unknown schema type: {1} for mime:content part: {0}
211 mimemodeler.invalidMimeContent.errorLoadingJavaClass=Couldn't find class \"{0}\" for mime type \"{1}\"
212
213 # missing wsdl:part referenced by the mime:content
214 wsdlmodeler.warning.ignoringMimePart.notFound=ignoring mime:part, cannot find part \"{0}\" referenced by the mime:content in the wsdl:operation \"{1}\"
215
216 mimemodeler.elementPart.invalidElementMimeType=The mime:content part refers to wsdl:part \"{0}\", defined using element attribute. Please make sure the mime type: \"{1}\" is appropriate to serialize XML.
217
218 # R2708 The mime:part element in a DESCRIPTION MUST NOT have a name attribute.
219 mimemodeler.invalidMimePart.nameNotAllowed=name attribute on wsdl:part in Operation \"{0}\" is ignored. Its not allowed as per WS-I AP 1.0.
220
221
222 wsdlmodeler20.rpcenc.not.supported=rpc/encoded wsdl's are not supported in JAXWS 2.0.
223 wsdlmodeler.warning.ignoringOperation.notNCName=Ignoring operation \"{0}\", it has illegal character ''{1}'' in its name. Its rpc-literal operation - jaxws won't be able to serialize it!
224
225 wsdlmodeler.warning.ignoringOperation.javaReservedWordNotAllowed.nonWrapperStyle=Ignoring operation \"{0}\", can''t generate java method. Parameter: part "{2}\" in wsdl:message \"{1}\", is a java keyword. Use customization to change the parameter name or change the wsdl:part name.
226 wsdlmodeler.invalid.operation.javaReservedWordNotAllowed.nonWrapperStyle=Invalid operation \"{0}\", can''t generate java method. Parameter: part "{2}\" in wsdl:message \"{1}\", is a java keyword. Use customization to change the parameter name or change the wsdl:part name.
227
228 wsdlmodeler.warning.ignoringOperation.javaReservedWordNotAllowed.wrapperStyle=Ignoring operation \"{0}\", can''t generate java method parameter. Local name of the wrapper child \"{1}\" in the global element \"{2}\" is a java keyword. Use customization to change the parameter name.
229 wsdlmodeler.invalid.operation.javaReservedWordNotAllowed.wrapperStyle=Invalid operation \"{0}\", can''t generate java method parameter. Local name of the wrapper child \"{1}\" in the global element \"{2}\" is a java keyword. Use customization to change the parameter name.
230
231 wsdlmodeler.warning.ignoringOperation.javaReservedWordNotAllowed.customName=Ignoring operation \"{0}\", can''t generate java method. Parameter,customized name \"{1}\" is a java keyword.
232 wsdlmodeler.invalid.operation.javaReservedWordNotAllowed.customName=Invalid operation \"{0}\", can''t generate java method. Parameter,customized name \"{1}\" is a java keyword.
233
234 wsdlmodeler.warning.ignoringOperation.javaReservedWordNotAllowed.operationName=Ignoring operation \"{0}\", it''s java reserved word, can''t generate java method. Use customization to change the operation name.
235 wsdlmodeler.invalid.operation.javaReservedWordNotAllowed.operationName=Invalid operation \"{0}\", it''s java reserved word, can''t generate java method. Use customization to change the operation name.
236
237 wsdlmodeler.warning.ignoringOperation.javaReservedWordNotAllowed.customizedOperationName=Ignoring operation \"{0}\", can''t generate java method ,customized name \"{1}\" of the wsdl:operation is a java keyword.
238 wsdlmodeler.invalid.operation.javaReservedWordNotAllowed.customizedOperationName=Invalid operation \"{0}\", can''t generate java method ,customized name \"{1}\" of the wsdl:operation is a java keyword.
239
240 wsdlmodeler.jaxb.javatype.notfound=Schema descriptor {0} in message part \"{1}\" is not defined and could not be bound to Java. Perhaps the schema descriptor {0} is not defined in the schema imported/included in the WSDL. You can either add such imports/includes or run wsimport and provide the schema location using -b switch.
241 wsdlmodeler.unsupportedBinding.mime=WSDL MIME binding is not currently supported!
242
243 wsdlmodeler.nonUnique.body.error=Non unique body parts! In a port, as per BP 1.1 R2710 operations must have unique operation signature on the wire for successful dispatch. In port {0}, Operations \"{1}\" and \"{2}\" have the same request body block {3}. Try running wsimport with -extension switch, runtime will try to dispatch using SOAPAction
244 wsdlmodeler.nonUnique.body.warning=Non unique body parts! In a port, as per BP 1.1 R2710 operations must have unique operation signature on the wire for successful dispatch. In port {0}, Operations \"{1}\" and \"{2}\" have the same request body block {3}. Method dispatching may fail, runtime will try to dispatch using SOAPAction
245
246 wsdlmodeler.rpclit.unkownschematype=XML type \"{0}\" could not be resolved, XML to JAVA binding failed! Please check the wsdl:part \"{1}\" in the wsdl:message \"{2}\".
247
248 wsdlmodeler.responsebean.notfound=wsimport failed to generate async response bean for operation: {0}