1 #
   2 # Copyright (c) 2013, 2020, Oracle and/or its affiliates. All rights reserved.
   3 # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
   4 #
   5 # This code is free software; you can redistribute it and/or modify it
   6 # under the terms of the GNU General Public License version 2 only, as
   7 # published by the Free Software Foundation.  Oracle designates this
   8 # particular file as subject to the "Classpath" exception as provided
   9 # by Oracle in the LICENSE file that accompanied this code.
  10 #
  11 # This code is distributed in the hope that it will be useful, but WITHOUT
  12 # ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  13 # FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
  14 # version 2 for more details (a copy is included in the LICENSE file that
  15 # accompanied this code).
  16 #
  17 # You should have received a copy of the GNU General Public License version
  18 # 2 along with this work; if not, write to the Free Software Foundation,
  19 # Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
  20 #
  21 # Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
  22 # or visit www.oracle.com if you need additional information or have any
  23 # questions.
  24 #
  25 
  26 $(eval $(call IncludeCustomExtension, hotspot/gensrc/GensrcAdlc.gmk))
  27 
  28 ifeq ($(call check-jvm-feature, compiler2), true)
  29 
  30   ADLC_SUPPORT_DIR := $(JVM_SUPPORT_DIR)/adlc
  31 
  32   ##############################################################################
  33   # Build the ad compiler (the adlc build tool)
  34 
  35   # Flags depending on the build platform/tool chain
  36   # NOTE: No optimization or debug flags set here
  37   ifeq ($(call isBuildOs, linux), true)
  38     ADLC_CFLAGS := -fno-exceptions -DLINUX
  39   else ifeq ($(call isBuildOs, aix), true)
  40     ADLC_LDFLAGS := -q64
  41     ADLC_CFLAGS := -qnortti -qeh -q64 -DAIX
  42   else ifeq ($(call isBuildOs, windows), true)
  43     ADLC_LDFLAGS := -nologo
  44     ADLC_CFLAGS := -nologo -EHsc
  45     # NOTE: The old build also have -D_CRT_SECURE_NO_DEPRECATE but it doesn't
  46     # seem needed any more.
  47     ADLC_CFLAGS_WARNINGS := -W3 -D_CRT_SECURE_NO_WARNINGS
  48   endif
  49 
  50   # Set the C++ standard if supported
  51   ADLC_CFLAGS += $(ADLC_CXXFLAG)
  52 
  53   # NOTE: The old build didn't set -DASSERT for windows but it doesn't seem to
  54   # hurt.
  55   ADLC_CFLAGS += -DASSERT
  56 
  57   ADLC_CFLAGS += -D$(HOTSPOT_TARGET_CPU_DEFINE)
  58 
  59   ADLC_CFLAGS += -I$(TOPDIR)/src/hotspot/share
  60 
  61   $(eval $(call SetupNativeCompilation, BUILD_ADLC, \
  62       NAME := adlc, \
  63       TYPE := EXECUTABLE, \
  64       TOOLCHAIN := TOOLCHAIN_BUILD_LINK_CXX, \
  65       SRC := $(TOPDIR)/src/hotspot/share/adlc, \
  66       EXTRA_FILES := $(TOPDIR)/src/hotspot/share/opto/opcodes.cpp, \
  67       CFLAGS := $(ADLC_CFLAGS) $(ADLC_CFLAGS_WARNINGS), \
  68       LDFLAGS := $(ADLC_LDFLAGS), \
  69       LIBS := $(ADLC_LIBS), \
  70       OBJECT_DIR := $(JVM_VARIANT_OUTPUTDIR)/tools/adlc/objs, \
  71       OUTPUT_DIR := $(JVM_VARIANT_OUTPUTDIR)/tools/adlc, \
  72       DEBUG_SYMBOLS := false, \
  73       DISABLED_WARNINGS_clang := tautological-compare, \
  74   ))
  75 
  76   ADLC_TOOL := $(BUILD_ADLC_TARGET)
  77 
  78   ##############################################################################
  79   # Transform the ad source files into C++ source files using adlc
  80 
  81   # Setup flags for the adlc build tool (ADLCFLAGS).
  82   ADLCFLAGS += -q -T
  83 
  84   # ADLC flags depending on target OS
  85   ifeq ($(call isTargetOs, linux), true)
  86     ADLCFLAGS += -DLINUX=1 -D_GNU_SOURCE=1
  87   else ifeq ($(call isTargetOs, aix), true)
  88     ADLCFLAGS += -DAIX=1
  89   else ifeq ($(call isTargetOs, macosx), true)
  90     ADLCFLAGS += -D_ALLBSD_SOURCE=1 -D_GNU_SOURCE=1
  91   endif
  92 
  93   ifeq ($(call isTargetOs, windows), false)
  94     # NOTE: Windows adlc flags was different in the old build. Is this really
  95     # correct?
  96 
  97     # -g makes #line directives in the generated C++ files.
  98     ADLCFLAGS += -g
  99 
 100     ADLCFLAGS += -D$(HOTSPOT_TARGET_CPU_DEFINE)=1
 101   endif
 102 
 103   # This generates checks in the generated C++ files that _LP64 is correctly
 104   # (un)defined when compiling them.
 105   ifeq ($(call isTargetCpuBits, 64), true)
 106     ADLCFLAGS += -D_LP64=1
 107   else
 108     ADLCFLAGS += -U_LP64
 109   endif
 110 
 111   ifeq ($(HOTSPOT_TARGET_CPU_ARCH), arm)
 112     ADLCFLAGS += -DARM=1
 113   endif
 114 
 115   ##############################################################################
 116   # Concatenate all ad source files into a single file, which will be fed to
 117   # adlc. Also include a #line directive at the start of every included file
 118   # (after the initial header block), stating the original source file name.
 119   #
 120   # Normally, debugging is done directly on the ad_<arch>*.cpp files, but the
 121   # #line directives in those files will be pointing back to <arch>.ad.
 122 
 123   # AD_SRC_ROOTS might have been added to by a custom extension
 124   AD_SRC_ROOTS += $(TOPDIR)/src/hotspot
 125 
 126   AD_SRC_FILES := $(call uniq, $(wildcard $(foreach d, $(AD_SRC_ROOTS), \
 127       $d/cpu/$(HOTSPOT_TARGET_CPU_ARCH)/$(HOTSPOT_TARGET_CPU).ad \
 128       $d/cpu/$(HOTSPOT_TARGET_CPU_ARCH)/$(HOTSPOT_TARGET_CPU_ARCH).ad \
 129       $d/os_cpu/$(HOTSPOT_TARGET_OS)_$(HOTSPOT_TARGET_CPU_ARCH)/$(HOTSPOT_TARGET_OS)_$(HOTSPOT_TARGET_CPU_ARCH).ad \
 130     )))
 131 
 132   ifeq ($(HOTSPOT_TARGET_CPU_ARCH), aarch64)
 133     AD_SRC_FILES += $(call uniq, $(wildcard $(foreach d, $(AD_SRC_ROOTS), \
 134         $d/cpu/$(HOTSPOT_TARGET_CPU_ARCH)/$(HOTSPOT_TARGET_CPU_ARCH)_neon.ad \
 135     )))
 136   endif
 137 
 138   ifeq ($(call check-jvm-feature, shenandoahgc), true)
 139     AD_SRC_FILES += $(call uniq, $(wildcard $(foreach d, $(AD_SRC_ROOTS), \
 140         $d/cpu/$(HOTSPOT_TARGET_CPU_ARCH)/gc/shenandoah/shenandoah_$(HOTSPOT_TARGET_CPU).ad \
 141       )))
 142   endif
 143 
 144   ifeq ($(call check-jvm-feature, zgc), true)
 145     AD_SRC_FILES += $(call uniq, $(wildcard $(foreach d, $(AD_SRC_ROOTS), \
 146         $d/cpu/$(HOTSPOT_TARGET_CPU_ARCH)/gc/z/z_$(HOTSPOT_TARGET_CPU).ad \
 147       )))
 148   endif
 149 
 150   SINGLE_AD_SRCFILE := $(ADLC_SUPPORT_DIR)/all-ad-src.ad
 151 
 152   INSERT_FILENAME_AWK_SCRIPT := \
 153       '{ \
 154          if (CUR_FN != FILENAME) { CUR_FN=FILENAME; NR_BASE=NR-1; need_lineno=1 } \
 155          if (need_lineno && $$0 !~ /\/\//) \
 156            { print "\n\n\#line " (NR-NR_BASE) " \"" FILENAME "\""; need_lineno=0 }; \
 157          print \
 158        }'
 159 
 160   $(SINGLE_AD_SRCFILE): $(AD_SRC_FILES)
 161         $(call LogInfo, Preprocessing adlc files $(^F))
 162         $(call MakeDir, $(@D))
 163         $(NAWK) $(INSERT_FILENAME_AWK_SCRIPT) $^ > $@
 164 
 165   ##############################################################################
 166   # Run the adlc tool on the single concatenated ad source file, and store the
 167   # output in support/adlc for further processing.
 168   $(eval $(call SetupExecute, adlc_run, \
 169       INFO := Generating adlc files, \
 170       DEPS := $(BUILD_ADLC) $(SINGLE_AD_SRCFILE), \
 171       OUTPUT_DIR := $(ADLC_SUPPORT_DIR), \
 172       COMMAND := $(FIXPATH) $(ADLC_TOOL) $(ADLCFLAGS) $(SINGLE_AD_SRCFILE) \
 173           -c$(ADLC_SUPPORT_DIR)/ad_$(HOTSPOT_TARGET_CPU_ARCH).cpp \
 174           -h$(ADLC_SUPPORT_DIR)/ad_$(HOTSPOT_TARGET_CPU_ARCH).hpp \
 175           -a$(ADLC_SUPPORT_DIR)/dfa_$(HOTSPOT_TARGET_CPU_ARCH).cpp \
 176           -v$(ADLC_SUPPORT_DIR)/adGlobals_$(HOTSPOT_TARGET_CPU_ARCH).hpp, \
 177   ))
 178 
 179   ##############################################################################
 180   # Finally copy the generated files from support/adlc into gensrc/adfiles,
 181   # and postprocess them by fixing dummy #line directives.
 182 
 183   ADLC_GENERATED_FILES := $(addprefix $(JVM_VARIANT_OUTPUTDIR)/gensrc/adfiles/, \
 184       ad_$(HOTSPOT_TARGET_CPU_ARCH).cpp \
 185       ad_$(HOTSPOT_TARGET_CPU_ARCH).hpp \
 186       ad_$(HOTSPOT_TARGET_CPU_ARCH)_clone.cpp \
 187       ad_$(HOTSPOT_TARGET_CPU_ARCH)_expand.cpp \
 188       ad_$(HOTSPOT_TARGET_CPU_ARCH)_format.cpp \
 189       ad_$(HOTSPOT_TARGET_CPU_ARCH)_gen.cpp \
 190       ad_$(HOTSPOT_TARGET_CPU_ARCH)_misc.cpp \
 191       ad_$(HOTSPOT_TARGET_CPU_ARCH)_peephole.cpp \
 192       ad_$(HOTSPOT_TARGET_CPU_ARCH)_pipeline.cpp \
 193       adGlobals_$(HOTSPOT_TARGET_CPU_ARCH).hpp \
 194       dfa_$(HOTSPOT_TARGET_CPU_ARCH).cpp \
 195   )
 196 
 197   $(JVM_VARIANT_OUTPUTDIR)/gensrc/adfiles/%: $(adlc_run_TARGET)
 198         $(call LogInfo, Postprocessing adlc file $*)
 199         $(call MakeDir, $(@D))
 200         $(NAWK) \
 201             'BEGIN { print "#line 1 \"$*\""; } \
 202              /^#line 999999$$/ {print "#line " (NR+1) " \"$*\""; next} \
 203              $(if $(call equals, $(ALLOW_ABSOLUTE_PATHS_IN_OUTPUT), false), \
 204                /^#line .*$$/ {sub("$(WORKSPACE_ROOT)/","")} \
 205              ) \
 206              {print}' \
 207             < $(ADLC_SUPPORT_DIR)/$* > $@
 208 
 209   TARGETS += $(ADLC_GENERATED_FILES)
 210 
 211 endif