1 /****************************************************************************
   2  *
   3  * ftmoderr.h
   4  *
   5  *   FreeType module error offsets (specification).
   6  *
   7  * Copyright (C) 2001-2019 by
   8  * David Turner, Robert Wilhelm, and Werner Lemberg.
   9  *
  10  * This file is part of the FreeType project, and may only be used,
  11  * modified, and distributed under the terms of the FreeType project
  12  * license, LICENSE.TXT.  By continuing to use, modify, or distribute
  13  * this file you indicate that you have read the license and
  14  * understand and accept it fully.
  15  *
  16  */
  17 
  18 
  19   /**************************************************************************
  20    *
  21    * This file is used to define the FreeType module error codes.
  22    *
  23    * If the macro `FT_CONFIG_OPTION_USE_MODULE_ERRORS` in `ftoption.h` is
  24    * set, the lower byte of an error value identifies the error code as
  25    * usual.  In addition, the higher byte identifies the module.  For
  26    * example, the error `FT_Err_Invalid_File_Format` has value 0x0003, the
  27    * error `TT_Err_Invalid_File_Format` has value 0x1303, the error
  28    * `T1_Err_Invalid_File_Format` has value 0x1403, etc.
  29    *
  30    * Note that `FT_Err_Ok`, `TT_Err_Ok`, etc. are always equal to zero,
  31    * including the high byte.
  32    *
  33    * If `FT_CONFIG_OPTION_USE_MODULE_ERRORS` isn't set, the higher byte of an
  34    * error value is set to zero.
  35    *
  36    * To hide the various `XXX_Err_` prefixes in the source code, FreeType
  37    * provides some macros in `fttypes.h`.
  38    *
  39    *   FT_ERR( err )
  40    *
  41    *     Add current error module prefix (as defined with the `FT_ERR_PREFIX`
  42    *     macro) to `err`.  For example, in the BDF module the line
  43    *
  44    *     ```
  45    *       error = FT_ERR( Invalid_Outline );
  46    *     ```
  47    *
  48    *     expands to
  49    *
  50    *     ```
  51    *       error = BDF_Err_Invalid_Outline;
  52    *     ```
  53    *
  54    *     For simplicity, you can always use `FT_Err_Ok` directly instead of
  55    *     `FT_ERR( Ok )`.
  56    *
  57    *   FT_ERR_EQ( errcode, err )
  58    *   FT_ERR_NEQ( errcode, err )
  59    *
  60    *     Compare error code `errcode` with the error `err` for equality and
  61    *     inequality, respectively.  Example:
  62    *
  63    *     ```
  64    *       if ( FT_ERR_EQ( error, Invalid_Outline ) )
  65    *         ...
  66    *     ```
  67    *
  68    *     Using this macro you don't have to think about error prefixes.  Of
  69    *     course, if module errors are not active, the above example is the
  70    *     same as
  71    *
  72    *     ```
  73    *       if ( error == FT_Err_Invalid_Outline )
  74    *         ...
  75    *     ```
  76    *
  77    *   FT_ERROR_BASE( errcode )
  78    *   FT_ERROR_MODULE( errcode )
  79    *
  80    *     Get base error and module error code, respectively.
  81    *
  82    * It can also be used to create a module error message table easily with
  83    * something like
  84    *
  85    * ```
  86    *   #undef FTMODERR_H_
  87    *   #define FT_MODERRDEF( e, v, s )  { FT_Mod_Err_ ## e, s },
  88    *   #define FT_MODERR_START_LIST     {
  89    *   #define FT_MODERR_END_LIST       { 0, 0 } };
  90    *
  91    *   const struct
  92    *   {
  93    *     int          mod_err_offset;
  94    *     const char*  mod_err_msg
  95    *   } ft_mod_errors[] =
  96    *
  97    *   #include FT_MODULE_ERRORS_H
  98    * ```
  99    *
 100    */
 101 
 102 
 103 #ifndef FTMODERR_H_
 104 #define FTMODERR_H_
 105 
 106 
 107   /*******************************************************************/
 108   /*******************************************************************/
 109   /*****                                                         *****/
 110   /*****                       SETUP MACROS                      *****/
 111   /*****                                                         *****/
 112   /*******************************************************************/
 113   /*******************************************************************/
 114 
 115 
 116 #undef  FT_NEED_EXTERN_C
 117 
 118 #ifndef FT_MODERRDEF
 119 
 120 #ifdef FT_CONFIG_OPTION_USE_MODULE_ERRORS
 121 #define FT_MODERRDEF( e, v, s )  FT_Mod_Err_ ## e = v,
 122 #else
 123 #define FT_MODERRDEF( e, v, s )  FT_Mod_Err_ ## e = 0,
 124 #endif
 125 
 126 #define FT_MODERR_START_LIST  enum {
 127 #define FT_MODERR_END_LIST    FT_Mod_Err_Max };
 128 
 129 #ifdef __cplusplus
 130 #define FT_NEED_EXTERN_C
 131   extern "C" {
 132 #endif
 133 
 134 #endif /* !FT_MODERRDEF */
 135 
 136 
 137   /*******************************************************************/
 138   /*******************************************************************/
 139   /*****                                                         *****/
 140   /*****               LIST MODULE ERROR BASES                   *****/
 141   /*****                                                         *****/
 142   /*******************************************************************/
 143   /*******************************************************************/
 144 
 145 
 146 #ifdef FT_MODERR_START_LIST
 147   FT_MODERR_START_LIST
 148 #endif
 149 
 150 
 151   FT_MODERRDEF( Base,      0x000, "base module" )
 152   FT_MODERRDEF( Autofit,   0x100, "autofitter module" )
 153   FT_MODERRDEF( BDF,       0x200, "BDF module" )
 154   FT_MODERRDEF( Bzip2,     0x300, "Bzip2 module" )
 155   FT_MODERRDEF( Cache,     0x400, "cache module" )
 156   FT_MODERRDEF( CFF,       0x500, "CFF module" )
 157   FT_MODERRDEF( CID,       0x600, "CID module" )
 158   FT_MODERRDEF( Gzip,      0x700, "Gzip module" )
 159   FT_MODERRDEF( LZW,       0x800, "LZW module" )
 160   FT_MODERRDEF( OTvalid,   0x900, "OpenType validation module" )
 161   FT_MODERRDEF( PCF,       0xA00, "PCF module" )
 162   FT_MODERRDEF( PFR,       0xB00, "PFR module" )
 163   FT_MODERRDEF( PSaux,     0xC00, "PS auxiliary module" )
 164   FT_MODERRDEF( PShinter,  0xD00, "PS hinter module" )
 165   FT_MODERRDEF( PSnames,   0xE00, "PS names module" )
 166   FT_MODERRDEF( Raster,    0xF00, "raster module" )
 167   FT_MODERRDEF( SFNT,     0x1000, "SFNT module" )
 168   FT_MODERRDEF( Smooth,   0x1100, "smooth raster module" )
 169   FT_MODERRDEF( TrueType, 0x1200, "TrueType module" )
 170   FT_MODERRDEF( Type1,    0x1300, "Type 1 module" )
 171   FT_MODERRDEF( Type42,   0x1400, "Type 42 module" )
 172   FT_MODERRDEF( Winfonts, 0x1500, "Windows FON/FNT module" )
 173   FT_MODERRDEF( GXvalid,  0x1600, "GX validation module" )
 174 
 175 
 176 #ifdef FT_MODERR_END_LIST
 177   FT_MODERR_END_LIST
 178 #endif
 179 
 180 
 181   /*******************************************************************/
 182   /*******************************************************************/
 183   /*****                                                         *****/
 184   /*****                      CLEANUP                            *****/
 185   /*****                                                         *****/
 186   /*******************************************************************/
 187   /*******************************************************************/
 188 
 189 
 190 #ifdef FT_NEED_EXTERN_C
 191   }
 192 #endif
 193 
 194 #undef FT_MODERR_START_LIST
 195 #undef FT_MODERR_END_LIST
 196 #undef FT_MODERRDEF
 197 #undef FT_NEED_EXTERN_C
 198 
 199 
 200 #endif /* FTMODERR_H_ */
 201 
 202 
 203 /* END */