1 #
2 # Copyright (c) 2011, 2016, Oracle and/or its affiliates. All rights reserved.
3 # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
4 #
5 # This code is free software; you can redistribute it and/or modify it
6 # under the terms of the GNU General Public License version 2 only, as
7 # published by the Free Software Foundation. Oracle designates this
8 # particular file as subject to the "Classpath" exception as provided
9 # by Oracle in the LICENSE file that accompanied this code.
10 #
11 # This code is distributed in the hope that it will be useful, but WITHOUT
12 # ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
13 # FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
14 # version 2 for more details (a copy is included in the LICENSE file that
15 # accompanied this code).
16 #
17 # You should have received a copy of the GNU General Public License version
18 # 2 along with this work; if not, write to the Free Software Foundation,
19 # Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
20 #
21 # Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
22 # or visit www.oracle.com if you need additional information or have any
23 # questions.
24 #
25
26 ################################################################
27 #
28 # Setup common utility functions.
29 #
30 ################################################################
31
32 ifndef _MAKEBASE_GMK
33 _MAKEBASE_GMK := 1
34
35 ifeq ($(wildcard $(SPEC)),)
36 $(error MakeBase.gmk needs SPEC set to a proper spec.gmk)
37 endif
38
39 # By defining this pseudo target, make will automatically remove targets
40 # if their recipe fails so that a rebuild is automatically triggered on the
41 # next make invocation.
42 .DELETE_ON_ERROR:
43
44 ################################################################################
45 # Definitions for special characters
46 ################################################################################
47
48 # When calling macros, the spaces between arguments are
49 # often semantically important! Sometimes we need to subst
50 # spaces and commas, therefore we need the following macros.
51 X:=
52 SPACE:=$(X) $(X)
53 COMMA:=,
54 DOLLAR:=$$
55 HASH:=\#
56 LEFT_PAREN:=(
57 RIGHT_PAREN:=)
58 SQUOTE:='
59 #'
60 DQUOTE:="
61 #"
62 define NEWLINE
63
64
65 endef
66
67 # In GNU Make 4.0 and higher, there is a file function for writing to files.
68 ifeq (4.0, $(firstword $(sort 4.0 $(MAKE_VERSION))))
69 HAS_FILE_FUNCTION := true
70 endif
71
72 ##############################
73 # Functions
74 ##############################
75
76 ### Debug functions
77
78 # Prints the name and value of a variable
79 PrintVar = \
80 $(info $(strip $1) >$($(strip $1))<)
81
82 ### Functions for timers
83
84 # Store the build times in this directory.
85 BUILDTIMESDIR=$(OUTPUT_ROOT)/make-support/build-times
86
87 # Record starting time for build of a sub repository.
88 define RecordStartTime
89 $(DATE) '+%Y %m %d %H %M %S' | $(NAWK) '{ print $$1,$$2,$$3,$$4,$$5,$$6,($$4*3600+$$5*60+$$6) }' > $(BUILDTIMESDIR)/build_time_start_$(strip $1) && \
90 $(DATE) '+%Y-%m-%d %H:%M:%S' > $(BUILDTIMESDIR)/build_time_start_$(strip $1)_human_readable
91 endef
92
93 # Record ending time and calculate the difference and store it in a
94 # easy to read format. Handles builds that cross midnight. Expects
95 # that a build will never take 24 hours or more.
96 define RecordEndTime
97 $(DATE) '+%Y %m %d %H %M %S' | $(NAWK) '{ print $$1,$$2,$$3,$$4,$$5,$$6,($$4*3600+$$5*60+$$6) }' > $(BUILDTIMESDIR)/build_time_end_$(strip $1)
98 $(DATE) '+%Y-%m-%d %H:%M:%S' > $(BUILDTIMESDIR)/build_time_end_$(strip $1)_human_readable
99 $(ECHO) `$(CAT) $(BUILDTIMESDIR)/build_time_start_$(strip $1)` `$(CAT) $(BUILDTIMESDIR)/build_time_end_$(strip $1)` $1 | \
100 $(NAWK) '{ F=$$7; T=$$14; if (F > T) { T+=3600*24 }; D=T-F; H=int(D/3600); \
101 M=int((D-H*3600)/60); S=D-H*3600-M*60; printf("%02d:%02d:%02d %s\n",H,M,S,$$15); }' \
102 > $(BUILDTIMESDIR)/build_time_diff_$(strip $1)
103 endef
104
105 # Hook to be called when starting to execute a top-level target
106 define TargetEnter
107 $(PRINTF) "## Starting $(patsubst %-only,%,$@)\n"
108 $(call RecordStartTime,$(patsubst %-only,%,$@))
109 endef
110
111 # Hook to be called when finish executing a top-level target
112 define TargetExit
113 $(call RecordEndTime,$(patsubst %-only,%,$@))
114 $(PRINTF) "## Finished $(patsubst %-only,%,$@) (build time %s)\n\n" \
115 "`$(CAT) $(BUILDTIMESDIR)/build_time_diff_$(patsubst %-only,%,$@) | $(CUT) -f 1 -d ' '`"
116 endef
117
118 ################################################################################
119 # This macro translates $ into \$ to protect the $ from expansion in the shell.
120 # To make this macro resilient against already escaped strings, first remove
121 # any present escapes before escaping so that no double escapes are added.
122 EscapeDollar = $(subst $$,\$$,$(subst \$$,$$,$(strip $1)))
123
124 ################################################################################
125 # This macro translates $ into $$ to protect the string from make itself.
126 DoubleDollar = $(subst $$,$$$$,$(strip $1))
127
128 ################################################################################
129 # ListPathsSafely can be used to print command parameters to a file. This is
130 # typically done if the command line lenght risk being too long for the
131 # OS/shell. In later make versions, the file function can be used for this
132 # purpose. For earlier versions, a more complex implementation is provided.
133 #
134 # The function ListPathsSafely can be called either directly or, more commonly
135 # from a recipe line. If called from a recipe, it will be executed in the
136 # evaluation phase of that recipe, which means that it will write to the file
137 # before any other line in the recipe has been run.
138 ifeq ($(HAS_FILE_FUNCTION), true)
139 # Param 1 - Name of variable containing paths/arguments to output
140 # Param 2 - File to print to
141 # Param 3 - Set to true to append to file instead of overwriting
142 define ListPathsSafely
143 $$(call MakeDir, $$(dir $$(strip $2)))
144 $$(file $$(if $$(filter true, $$(strip $3)),>>,>) \
145 $$(strip $2),$$(subst $$(SPACE),$$(NEWLINE),$$(strip $$($$(strip $1)))))
146 endef
147
148 else # HAS_FILE_FUNCTION
149
150 $(eval compress_paths = \
151 $(strip $(shell $(CAT) $(SRC_ROOT)/make/common/support/ListPathsSafely-pre-compress.incl)))
152 compress_paths += \
153 $(subst $(SRC_ROOT),X97, \
154 $(subst $(OUTPUT_ROOT),X98, \
155 $(subst X,X00, \
156 $(subst $(SPACE),\n,$(strip $1)))))
157 $(eval compress_paths += \
158 $(strip $(shell $(CAT) $(SRC_ROOT)/make/common/support/ListPathsSafely-post-compress.incl)))
159
160 decompress_paths=$(SED) -f $(SRC_ROOT)/make/common/support/ListPathsSafely-uncompress.sed \
161 -e 's|X99|\\n|g' \
162 -e 's|X98|$(OUTPUT_ROOT)|g' -e 's|X97|$(SRC_ROOT)|g' \
163 -e 's|X00|X|g'
164
165 ListPathsSafely_IfPrintf = \
166 $(if $(word $3,$($(strip $1))), \
167 $(shell $(PRINTF) -- "$(strip $(call EscapeDollar, \
168 $(call compress_paths, $(wordlist $3,$4,$($(strip $1))))))\n" \
169 | $(decompress_paths) >> $2))
170
171 # Param 1 - Name of variable containing paths/arguments to output
172 # Param 2 - File to print to
173 # Param 3 - Set to true to append to file instead of overwriting
174 define ListPathsSafely
175 ifneq (,$$(word 10001,$$($1)))
176 $$(error Cannot list safely more than 10000 paths. $1 has $$(words $$($1)) paths!)
177 endif
178 $$(call MakeDir, $$(dir $2))
179 ifneq ($$(strip $3), true)
180 $$(shell $(RM) $$(strip $2))
181 endif
182
183 $$(call ListPathsSafely_IfPrintf,$1,$2,1,250)
184 $$(call ListPathsSafely_IfPrintf,$1,$2,251,500)
185 $$(call ListPathsSafely_IfPrintf,$1,$2,501,750)
186 $$(call ListPathsSafely_IfPrintf,$1,$2,751,1000)
187
188 $$(call ListPathsSafely_IfPrintf,$1,$2,1001,1250)
189 $$(call ListPathsSafely_IfPrintf,$1,$2,1251,1500)
190 $$(call ListPathsSafely_IfPrintf,$1,$2,1501,1750)
191 $$(call ListPathsSafely_IfPrintf,$1,$2,1751,2000)
192
193 $$(call ListPathsSafely_IfPrintf,$1,$2,2001,2250)
194 $$(call ListPathsSafely_IfPrintf,$1,$2,2251,2500)
195 $$(call ListPathsSafely_IfPrintf,$1,$2,2501,2750)
196 $$(call ListPathsSafely_IfPrintf,$1,$2,2751,3000)
197
198 $$(call ListPathsSafely_IfPrintf,$1,$2,3001,3250)
199 $$(call ListPathsSafely_IfPrintf,$1,$2,3251,3500)
200 $$(call ListPathsSafely_IfPrintf,$1,$2,3501,3750)
201 $$(call ListPathsSafely_IfPrintf,$1,$2,3751,4000)
202
203 $$(call ListPathsSafely_IfPrintf,$1,$2,4001,4250)
204 $$(call ListPathsSafely_IfPrintf,$1,$2,4251,4500)
205 $$(call ListPathsSafely_IfPrintf,$1,$2,4501,4750)
206 $$(call ListPathsSafely_IfPrintf,$1,$2,4751,5000)
207
208 $$(call ListPathsSafely_IfPrintf,$1,$2,5001,5250)
209 $$(call ListPathsSafely_IfPrintf,$1,$2,5251,5500)
210 $$(call ListPathsSafely_IfPrintf,$1,$2,5501,5750)
211 $$(call ListPathsSafely_IfPrintf,$1,$2,5751,6000)
212
213 $$(call ListPathsSafely_IfPrintf,$1,$2,6001,6250)
214 $$(call ListPathsSafely_IfPrintf,$1,$2,6251,6500)
215 $$(call ListPathsSafely_IfPrintf,$1,$2,6501,6750)
216 $$(call ListPathsSafely_IfPrintf,$1,$2,6751,7000)
217
218 $$(call ListPathsSafely_IfPrintf,$1,$2,7001,7250)
219 $$(call ListPathsSafely_IfPrintf,$1,$2,7251,7500)
220 $$(call ListPathsSafely_IfPrintf,$1,$2,7501,7750)
221 $$(call ListPathsSafely_IfPrintf,$1,$2,7751,8000)
222
223 $$(call ListPathsSafely_IfPrintf,$1,$2,8001,8250)
224 $$(call ListPathsSafely_IfPrintf,$1,$2,8251,8500)
225 $$(call ListPathsSafely_IfPrintf,$1,$2,8501,8750)
226 $$(call ListPathsSafely_IfPrintf,$1,$2,8751,9000)
227
228 $$(call ListPathsSafely_IfPrintf,$1,$2,9001,9250)
229 $$(call ListPathsSafely_IfPrintf,$1,$2,9251,9500)
230 $$(call ListPathsSafely_IfPrintf,$1,$2,9501,9750)
231 $$(call ListPathsSafely_IfPrintf,$1,$2,9751,10000)
232 endef
233 endif # HAS_FILE_FUNCTION
234
235 ################################################################################
236 # The source tips can come from the Mercurial repository, or in the files
237 # $(HGTIP_FILENAME) which contains the tip but is also positioned in the same
238 # directory as the original $(HGDIR) directory.
239 # These should not be := assignments, only used from the root Makefile.
240 HG_VERSION = $(shell $(HG) version 2> /dev/null)
241 HG_DIRECTORY=.hg
242 HGTIP_FILENAME=.hgtip
243 HG_SEARCH = ./REPO ./*/REPO ./*/*/REPO ./*/*/*/REPO
244 REPO_LIST = $(patsubst ./%,%,$(patsubst %/,%,$(sort $(dir \
245 $(shell $(CD) $(SRC_ROOT) ; \
246 $(LS) -d $(HG_SEARCH:%/REPO=%/$(HG_DIRECTORY)) \
247 $(HG_SEARCH:%/REPO=%/$(HGTIP_FILENAME)) \
248 2> /dev/null)))))
249
250 # Emit the repo:tip pairs to $@, but only if they changed since last time
251 define GetSourceTips
252 $(CD) $(SRC_ROOT) ; \
253 for i in $(REPO_LIST) IGNORE ; do \
254 if [ "$${i}" = "IGNORE" ] ; then \
255 continue; \
256 elif [ -d $${i}/$(HG_DIRECTORY) -a "$(HG_VERSION)" != "" ] ; then \
257 $(PRINTF) " %s:%s" \
258 "$${i}" `$(HG) tip --repository $${i} --template '{node|short}\n'` ; \
259 elif [ -f $${i}/$(HGTIP_FILENAME) ] ; then \
260 $(PRINTF) " %s:%s" \
261 "$${i}" `$(CAT) $${i}/$(HGTIP_FILENAME)` ; \
262 fi; \
263 done > $@.tmp
264 $(PRINTF) "\n" >> $@.tmp
265 if [ ! -f $@ ] || [ "`$(CAT) $@`" != "`$(CAT) $@.tmp`" ]; then \
266 $(MV) $@.tmp $@ ; \
267 else \
268 $(RM) $@.tmp ; \
269 fi
270 endef
271
272 # Create the HGTIP_FILENAME file. Called from closed/make/SourceBundles.gmk
273 define CreateHgTip
274 $(HG) tip --repository $1 --template '{node|short}\n' > $1/$(HGTIP_FILENAME); \
275 $(ECHO) $1/$(HGTIP_FILENAME)
276 endef
277
278 ################################################################################
279
280 define SetupLogging
281 ifeq ($$(LOG_LEVEL), trace)
282 # Shell redefinition trick inspired by http://www.cmcrossroads.com/ask-mr-make/6535-tracing-rule-execution-in-gnu-make
283 # For each target executed, will print
284 # Building <TARGET> (from <FIRST PREREQUISITE>) (<ALL NEWER PREREQUISITES> newer)
285 # but with a limit of 20 on <ALL NEWER PREREQUISITES>, to avoid cluttering logs too much
286 # (and causing a crash on Cygwin).
287 # Default shell seems to always be /bin/sh. Must override with bash to get this to work on Solaris.
288 # Only use time if it's GNU time which supports format and output file.
289 WRAPPER_SHELL := $$(BASH) $$(SRC_ROOT)/common/bin/shell-tracer.sh $$(if $$(findstring yes,$$(IS_GNU_TIME)),$$(TIME),-) $$(OUTPUT_ROOT)/build-trace-time.log $$(SHELL)
290 SHELL = $$(warning $$(if $$@,Building $$@,Running shell command) $$(if $$<, (from $$<))$$(if $$?, ($$(wordlist 1, 20, $$?) $$(if $$(wordlist 21, 22, $$?), ... [in total $$(words $$?) files]) newer)))$$(WRAPPER_SHELL)
291 endif
292 # The warn level can never be turned off
293 LogWarn = $$(info $$(strip $$1))
294 LOG_WARN :=
295 ifneq ($$(findstring $$(LOG_LEVEL), info debug trace),)
296 LogInfo = $$(info $$(strip $$1))
297 LOG_INFO :=
298 else
299 LogInfo =
300 LOG_INFO := > /dev/null
301 endif
302 ifneq ($$(findstring $$(LOG_LEVEL), debug trace),)
303 LogDebug = $$(info $$(strip $$1))
304 LOG_DEBUG :=
305 else
306 LogDebug =
307 LOG_DEBUG := > /dev/null
308 endif
309 ifneq ($$(findstring $$(LOG_LEVEL), trace),)
310 LogTrace = $$(info $$(strip $$1))
311 LOG_TRACE :=
312 else
313 LogTrace =
314 LOG_TRACE := > /dev/null
315 endif
316 endef
317
318 # Make sure logging is setup for everyone that includes MakeBase.gmk.
319 $(eval $(call SetupLogging))
320
321 ################################################################################
322 # Creates a sequence of increasing numbers (inclusive).
323 # Param 1 - starting number
324 # Param 2 - ending number
325 sequence = \
326 $(wordlist $1, $2, $(strip \
327 $(eval SEQUENCE_COUNT :=) \
328 $(call _sequence-do,$(strip $2))))
329
330 _sequence-do = \
331 $(if $(word $1, $(SEQUENCE_COUNT)),, \
332 $(eval SEQUENCE_COUNT += .) \
333 $(words $(SEQUENCE_COUNT)) \
334 $(call _sequence-do,$1))
335
336 ################################################################################
337
338 MAX_PARAMS := 35
339 PARAM_SEQUENCE := $(call sequence, 2, $(MAX_PARAMS))
340
341 # Template for creating a macro taking named parameters. To use it, assign the
342 # template to a variable with the name you want for your macro, using '='
343 # assignment. Then define a macro body with the suffix "Body". The Body macro
344 # should take 1 parameter which should be a unique string for that invocation
345 # of the macro.
346 # Ex:
347 # SetupFoo = $(NamedParamsMacroTemplate)
348 # define SetupFooBody
349 # # do something
350 # # access parameters as $$($1_BAR)
351 # endef
352 # Call it like this
353 # $(eval $(call SetupFoo, BUILD_SOMETHING, \
354 # BAR := some parameter value, \
355 # ))
356 define NamedParamsMacroTemplate
357 $(if $($(MAX_PARAMS)),$(error Internal makefile error: \
358 Too many named arguments to macro, please update MAX_PARAMS in MakeBase.gmk))
359 # Iterate over 2 3 4... and evaluate the named parameters with $1_ as prefix
360 $(foreach i,$(PARAM_SEQUENCE), $(if $(strip $($i)),\
361 $(strip $1)_$(strip $($i)))$(NEWLINE))
362 # Debug print all named parameter names and values
363 $(if $(findstring $(LOG_LEVEL),debug trace), \
364 $(info $0 $(strip $1) $(foreach i,$(PARAM_SEQUENCE), \
365 $(if $(strip $($i)),$(NEWLINE) $(strip [$i] $(if $(filter $(LOG_LEVEL), trace), \
366 $($i), $(wordlist 1, 20, $($(i))) $(if $(word 21, $($(i))), ...)))))))
367
368 $(if $(DEBUG_$(strip $1)),
369 $(info -------- <<< Begin expansion of $(strip $1)) \
370 $(info $(call $(0)Body,$(strip $1))) \
371 $(info -------- >>> End expansion of $(strip $1)) \
372 )
373
374 $(call $(0)Body,$(strip $1))
375 endef
376
377 ################################################################################
378 # Make directory without forking mkdir if not needed
379 # 1: List of directories to create
380 MakeDir = \
381 $(strip \
382 $(eval MakeDir_dirs_to_make := $(strip $(foreach d, $1, $(if $(wildcard $d), , $d)))) \
383 $(if $(MakeDir_dirs_to_make), $(shell $(MKDIR) -p $(MakeDir_dirs_to_make))) \
384 )
385
386 ################################################################################
387 # Assign a variable only if it is empty
388 # Param 1 - Variable to assign
389 # Param 2 - Value to assign
390 SetIfEmpty = \
391 $(if $($(strip $1)),,$(eval $(strip $1) := $2))
392
393 ################################################################################
394
395 ifeq ($(OPENJDK_TARGET_OS),solaris)
396 # On Solaris, if the target is a symlink and exists, cp won't overwrite.
397 # Cp has to operate in recursive mode to allow for -P flag, to preserve soft links. If the
398 # name of the target file differs from the source file, rename after copy.
399 # If the source and target parent directories are the same, recursive copy doesn't work
400 # so we fall back on regular copy, which isn't preserving symlinks.
401 define install-file
402 $(MKDIR) -p '$(@D)'
403 $(RM) '$@'
404 if [ "$(@D)" != "$(<D)" ]; then \
405 $(CP) -f -r -P '$<' '$(@D)'; \
406 if [ "$(@F)" != "$(<F)" ]; then \
407 $(MV) '$(@D)/$(<F)' '$@'; \
408 fi; \
409 else \
410 if [ -L '$<' ]; then \
411 $(ECHO) "Source file is a symlink and target is in the same directory: $< $@" ; \
412 exit 1; \
413 fi; \
414 $(CP) -f '$<' '$@'; \
415 fi
416 endef
417 else ifeq ($(OPENJDK_TARGET_OS),macosx)
418 # On mac, extended attributes sometimes creep into the source files, which may later
419 # cause the creation of ._* files which confuses testing. Clear these with xattr if
420 # set. Some files get their write permissions removed after being copied to the
421 # output dir. When these are copied again to images, xattr would fail. By only clearing
422 # attributes when they are present, failing on this is avoided.
423 define install-file
424 $(MKDIR) -p '$(@D)'
425 $(CP) -fRP '$<' '$@'
426 if [ -n "`$(XATTR) -l '$@'`" ]; then $(XATTR) -c '$@'; fi
427 endef
428 else
429 # Running mkdir and cp in the same shell speeds up copy intensive tasks in Cygwin
430 # significantly.
431 define install-file
432 $(call MakeDir, $(@D))
433 $(CP) -fP '$<' '$@'
434 endef
435 endif
436
437 ################################################################################
438 # Filter out duplicate sub strings while preserving order. Keeps the first occurance.
439 uniq = \
440 $(if $1,$(firstword $1) $(call uniq,$(filter-out $(firstword $1),$1)))
441
442 # Returns all whitespace-separated words in $2 where at least one of the
443 # whitespace-separated words in $1 is a substring.
444 containing = \
445 $(strip \
446 $(foreach v,$(strip $2),\
447 $(call uniq,$(foreach p,$(strip $1),$(if $(findstring $p,$v),$v)))))
448
449 # Returns all whitespace-separated words in $2 where none of the
450 # whitespace-separated words in $1 is a substring.
451 not-containing = \
452 $(strip $(filter-out $(call containing,$1,$2),$2))
453
454 # Return a list of all string elements that are duplicated in $1.
455 dups = \
456 $(strip $(foreach v, $(sort $1), $(if $(filter-out 1, \
457 $(words $(filter $v, $1))), $v)))
458
459 # String equals
460 equals = \
461 $(and $(findstring $(strip $1),$(strip $2)),\
462 $(findstring $(strip $2),$(strip $1)))
463
464 # Remove a whole list of prefixes
465 # $1 - List of prefixes
466 # $2 - List of elements to process
467 remove-prefixes = \
468 $(strip $(if $1,$(patsubst $(firstword $1)%,%,\
469 $(call remove-prefixes,$(filter-out $(firstword $1),$1),$2)),$2))
470
471 # Convert the string given to upper case, without any $(shell)
472 # Inspired by http://lists.gnu.org/archive/html/help-make/2013-09/msg00009.html
473 uppercase_table := a,A b,B c,C d,D e,E f,F g,G h,H i,I j,J k,K l,L m,M n,N o,O \
474 p,P q,Q r,R s,S t,T u,U v,V w,W x,X y,Y z,Z
475
476 uppercase_internal = \
477 $(if $(strip $1), $$(subst $(firstword $1), $(call uppercase_internal, \
478 $(wordlist 2, $(words $1), $1), $2)), $2)
479
480 # Convert a string to upper case. Works only on a-z.
481 # $1 - The string to convert
482 uppercase = \
483 $(strip \
484 $(eval uppercase_result := $(call uppercase_internal, $(uppercase_table), $1)) \
485 $(uppercase_result) \
486 )
487
488 ################################################################################
489
490 ifneq ($(DISABLE_CACHE_FIND), true)
491 # In Cygwin, finds are very costly, both because of expensive forks and because
492 # of bad file system caching. Find is used extensively in $(shell) commands to
493 # find source files. This makes rerunning make with no or few changes rather
494 # expensive. To speed this up, these two macros are used to cache the results
495 # of simple find commands for reuse.
496 #
497 # Runs a find and stores both the directories where it was run and the results.
498 # This macro can be called multiple times to add to the cache. Only finds files
499 # with no filters.
500 #
501 # Needs to be called with $(eval )
502 #
503 # Even if the performance benifit is negligible on other platforms, keep the
504 # functionality active unless explicitly disabled to exercise it more.
505 #
506 # Initialize FIND_CACHE_DIRS with := to make it a non recursively-expanded variable
507 FIND_CACHE_DIRS :=
508 # Param 1 - Dirs to find in
509 # Param 2 - (optional) specialization. Normally "-a \( ... \)" expression.
510 define FillCacheFind
511 # Filter out already cached dirs. The - is needed when FIND_CACHE_DIRS is empty
512 # since filter out will then return empty.
513 FIND_CACHE_NEW_DIRS := $$(filter-out $$(addsuffix /%,\
514 - $(FIND_CACHE_DIRS)) $(FIND_CACHE_DIRS), $1)
515 ifneq ($$(FIND_CACHE_NEW_DIRS), )
516 # Remove any trailing slash from dirs in the cache dir list
517 FIND_CACHE_DIRS += $$(patsubst %/,%, $$(FIND_CACHE_NEW_DIRS))
518 FIND_CACHE := $$(sort $$(FIND_CACHE) $$(shell $(FIND) $$(FIND_CACHE_NEW_DIRS) \( -type f -o -type l \) $2))
519 endif
520 endef
521
522 # Mimics find by looking in the cache if all of the directories have been cached.
523 # Otherwise reverts to shell find. This is safe to call on all platforms, even if
524 # cache is deactivated.
525 #
526 # $1 can be either a directory or a file. If it's a directory, make
527 # sure we have exactly one trailing slash before the wildcard.
528 # The extra - is needed when FIND_CACHE_DIRS is empty but should be harmless.
529 #
530 # Param 1 - Dirs to find in
531 # Param 2 - (optional) specialization. Normally "-a \( ... \)" expression.
532 define CacheFind
533 $(if $(filter-out $(addsuffix /%,- $(FIND_CACHE_DIRS)) $(FIND_CACHE_DIRS),$1), \
534 $(shell $(FIND) $1 \( -type f -o -type l \) $2), \
535 $(filter $(addsuffix /%,$(patsubst %/,%,$1)) $1,$(FIND_CACHE)))
536 endef
537
538 else
539 # If CacheFind is disabled, just run the find command.
540 # Param 1 - Dirs to find in
541 # Param 2 - (optional) specialization. Normally "-a \( ... \)" expression.
542 define CacheFind
543 $(shell $(FIND) $1 \( -type f -o -type l \) $2)
544 endef
545 endif
546
547 ################################################################################
548
549 define AddFileToCopy
550 # Helper macro for SetupCopyFiles
551 # 1 : Source file
552 # 2 : Dest file
553 # 3 : Variable to add targets to
554 # 4 : Macro to call for copy operation
555 $2: $1
556 $$(call LogInfo, Copying $$(patsubst $(OUTPUT_ROOT)/%,%,$$@))
557 $$($$(strip $4))
558
559 $3 += $2
560 endef
561
562 # Returns the value of the first argument
563 identity = \
564 $(strip $1)
565
566 # Setup make rules for copying files, with an option to do more complex
567 # processing instead of copying.
568 #
569 # Parameter 1 is the name of the rule. This name is used as variable prefix,
570 # and the targets generated are listed in a variable by that name.
571 #
572 # Remaining parameters are named arguments. These include:
573 # SRC : Source root dir (defaults to dir of first file)
574 # DEST : Dest root dir
575 # FILES : List of files to copy with absolute paths, or path relative to SRC.
576 # Must be in SRC.
577 # FLATTEN : Set to flatten the directory structure in the DEST dir.
578 # MACRO : Optionally override the default macro used for making the copy.
579 # Default is 'install-file'
580 # NAME_MACRO : Optionally supply a macro that rewrites the target file name
581 # based on the source file name
582 SetupCopyFiles = $(NamedParamsMacroTemplate)
583 define SetupCopyFilesBody
584
585 ifeq ($$($1_MACRO), )
586 $1_MACRO := install-file
587 endif
588
589 # Default SRC to the dir of the first file.
590 ifeq ($$($1_SRC), )
591 $1_SRC := $$(dir $$(firstword $$($1_FILES)))
592 endif
593
594 ifeq ($$($1_NAME_MACRO), )
595 $1_NAME_MACRO := identity
596 endif
597
598 # Remove any trailing slash from SRC and DEST
599 $1_SRC := $$(patsubst %/,%,$$($1_SRC))
600 $1_DEST := $$(patsubst %/,%,$$($1_DEST))
601
602 $$(foreach f, $$(patsubst $$($1_SRC)/%,%,$$($1_FILES)), \
603 $$(eval $$(call AddFileToCopy, $$($1_SRC)/$$f, \
604 $$($1_DEST)/$$(call $$(strip $$($1_NAME_MACRO)),$$(if $$($1_FLATTEN),$$(notdir $$f),$$f)), \
605 $1, $$($1_MACRO))))
606
607 endef
608
609 ################################################################################
610 # ShellQuote
611 #
612 # Quotes a string with single quotes and replaces single quotes with '\'' so
613 # that the contents survives being given to the shell.
614
615 ShellQuote = \
616 $(SQUOTE)$(subst $(SQUOTE),$(SQUOTE)\$(SQUOTE)$(SQUOTE),$(strip $1))$(SQUOTE)
617
618 ################################################################################
619 # Write to and read from file
620
621 # Param 1 - File to read
622 ReadFile = \
623 $(shell $(CAT) $1)
624
625 # Param 1 - Text to write
626 # Param 2 - File to write to
627 ifeq ($(HAS_FILE_FUNCTION), true)
628 WriteFile = \
629 $(file >$2,$(strip $1))
630 else
631 # Use printf to get consistent behavior on all platforms.
632 WriteFile = \
633 $(shell $(PRINTF) "%s" $(call ShellQuote, $1) > $2)
634 endif
635
636 ################################################################################
637 # DependOnVariable
638 #
639 # This macro takes a variable name and puts the value in a file only if the
640 # value has changed since last. The name of the file is returned. This can be
641 # used to create rule dependencies on make variable values. The following
642 # example would get rebuilt if the value of SOME_VAR was changed:
643 #
644 # path/to/some-file: $(call DependOnVariable, SOME_VAR)
645 # echo $(SOME_VAR) > $@
646 #
647 # Note that leading and trailing white space in the value is ignored.
648 #
649
650 # Defines the sub directory structure to store variable value file in
651 DependOnVariableDirName = \
652 $(strip $(addsuffix $(if $(MODULE),/$(MODULE)), \
653 $(subst $(SRC_ROOT)/,, $(if $(filter /%, $(firstword $(MAKEFILE_LIST))), \
654 $(firstword $(MAKEFILE_LIST)), \
655 $(CURDIR)/$(firstword $(MAKEFILE_LIST))))))
656
657 # Defines the name of the file to store variable value in. Generates a name
658 # unless parameter 2 is given.
659 # Param 1 - Name of variable
660 # Param 2 - (optional) name of file to store value in
661 DependOnVariableFileName = \
662 $(strip $(if $(strip $2), $2, \
663 $(MAKESUPPORT_OUTPUTDIR)/vardeps/$(DependOnVariableDirName)/$(strip $1).vardeps))
664
665 # Does the actual work with parameters stripped.
666 # If the file exists AND the contents is the same as the variable, do nothing
667 # else print a new file.
668 # Always returns the name of the file where the value was printed.
669 # Param 1 - Name of variable
670 # Param 2 - (optional) name of file to store value in
671 DependOnVariableHelper = \
672 $(strip \
673 $(eval -include $(call DependOnVariableFileName, $1, $2)) \
674 $(if $(call equals, $(strip $($1)), $(strip $($1_old))),,\
675 $(call MakeDir, $(dir $(call DependOnVariableFileName, $1, $2))) \
676 $(if $(findstring $(LOG_LEVEL), trace), \
677 $(info NewVariable $1: >$(strip $($1))<) \
678 $(info OldVariable $1: >$(strip $($1_old))<)) \
679 $(call WriteFile, $1_old:=$(call DoubleDollar,$($1)), \
680 $(call DependOnVariableFileName, $1, $2))) \
681 $(call DependOnVariableFileName, $1, $2) \
682 )
683
684 # Main macro
685 # Param 1 - Name of variable
686 # Param 2 - (optional) name of file to store value in
687 DependOnVariable = \
688 $(call DependOnVariableHelper,$(strip $1),$(strip $2))
689
690 # LogCmdlines is only intended to be used by ExecuteWithLog
691 ifeq ($(LOG_CMDLINES), true)
692 LogCmdlines = $(info $(strip $1))
693 else
694 LogCmdlines =
695 endif
696
697 ################################################################################
698 # ExecuteWithLog will run a command and log the output appropriately. This is
699 # meant to be used by commands that do "real" work, like a compilation.
700 # The output is stored in a specified log file, which is displayed at the end
701 # of the build in case of failure. The command line itself is stored in a file,
702 # and also logged to stdout if the LOG=cmdlines option has been given.
703 #
704 # Param 1 - The path to base the name of the log file / command line file on
705 # Param 2 - The command to run
706 ExecuteWithLog = \
707 $(call LogCmdlines, Exececuting: [$(strip $2)]) \
708 $(call WriteFile, $2, $(strip $1).cmdline) \
709 ( ( $(strip $2) > >($(TEE) $(strip $1).log) 2> >($(TEE) $(strip $1).log >&2) || \
710 ( exitcode=$(DOLLAR)? && \
711 $(CP) $(strip $1).log $(MAKESUPPORT_OUTPUTDIR)/failure-logs/$(subst /,_,$(patsubst $(BUILD_OUTPUT)/%,%,$(strip $1))).log && \
712 exit $(DOLLAR)exitcode ) ) && wait )
713
714 ################################################################################
715 # Find lib dir for module
716 # Param 1 - module name
717 ifeq ($(OPENJDK_TARGET_OS_TYPE), unix)
718 FindLibDirForModule = \
719 $(SUPPORT_OUTPUTDIR)/modules_libs/$(strip $1)$(OPENJDK_TARGET_CPU_LIBDIR)
720 else
721 FindLibDirForModule = \
722 $(SUPPORT_OUTPUTDIR)/modules_libs/$(strip $1)
723 endif
724
725 ################################################################################
726 # Return a string suitable for use after a -classpath or -modulepath option. It
727 # will be correct and safe to use on all platforms. Arguments are given as space
728 # separate classpath entries. Safe for multiple nested calls.
729 # param 1 : A space separated list of classpath entries
730 # The surrounding strip is needed to keep additional whitespace out
731 PathList = \
732 "$(subst $(SPACE),$(PATH_SEP),$(strip $(subst $(DQUOTE),,$1)))"
733
734 ################################################################################
735 # Check if a specified hotspot variant is being built, or at least one of a
736 # list of variants. Will return 'true' or 'false'.
737 # $1 - the variant to test for
738 check-jvm-variant = \
739 $(strip \
740 $(if $(filter-out $(VALID_JVM_VARIANTS), $1), \
741 $(error Internal error: Invalid variant tested: $1)) \
742 $(if $(filter $1, $(JVM_VARIANTS)), true, false))
743
744 ################################################################################
745 # Converts a space separated list to a comma separated list.
746 #
747 # Replacing double-comma with a single comma is to workaround the issue with
748 # some version of make on windows that doesn't substitute spaces with one comma
749 # properly.
750 CommaList = \
751 $(strip \
752 $(subst $(COMMA)$(COMMA),$(COMMA),$(subst $(SPACE),$(COMMA),$(strip $1))) \
753 )
754
755 ################################################################################
756
757 # Hook to include the corresponding custom file, if present.
758 $(eval $(call IncludeCustomExtension, , common/MakeBase.gmk))
759
760 endif # _MAKEBASE_GMK