1 /* 2 * Copyright (c) 1997, 2017, Oracle and/or its affiliates. All rights reserved. 3 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. 4 * 5 * This code is free software; you can redistribute it and/or modify it 6 * under the terms of the GNU General Public License version 2 only, as 7 * published by the Free Software Foundation. 8 * 9 * This code is distributed in the hope that it will be useful, but WITHOUT 10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License 12 * version 2 for more details (a copy is included in the LICENSE file that 13 * accompanied this code). 14 * 15 * You should have received a copy of the GNU General Public License version 16 * 2 along with this work; if not, write to the Free Software Foundation, 17 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. 18 * 19 * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA 20 * or visit www.oracle.com if you need additional information or have any 21 * questions. 22 * 23 */ 24 25 #include "precompiled.hpp" 26 #include "interp_masm_x86.hpp" 27 #include "interpreter/interpreter.hpp" 28 #include "interpreter/interpreterRuntime.hpp" 29 #include "logging/log.hpp" 30 #include "oops/arrayOop.hpp" 31 #include "oops/markOop.hpp" 32 #include "oops/methodData.hpp" 33 #include "oops/method.hpp" 34 #include "prims/jvmtiExport.hpp" 35 #include "prims/jvmtiThreadState.hpp" 36 #include "runtime/basicLock.hpp" 37 #include "runtime/biasedLocking.hpp" 38 #include "runtime/safepointMechanism.hpp" 39 #include "runtime/sharedRuntime.hpp" 40 #include "runtime/thread.inline.hpp" 41 42 // Implementation of InterpreterMacroAssembler 43 44 void InterpreterMacroAssembler::jump_to_entry(address entry) { 45 assert(entry, "Entry must have been generated by now"); 46 jump(RuntimeAddress(entry)); 47 } 48 49 void InterpreterMacroAssembler::profile_obj_type(Register obj, const Address& mdo_addr) { 50 Label update, next, none; 51 52 verify_oop(obj); 53 54 testptr(obj, obj); 55 jccb(Assembler::notZero, update); 56 orptr(mdo_addr, TypeEntries::null_seen); 57 jmpb(next); 58 59 bind(update); 60 load_klass(obj, obj); 61 62 xorptr(obj, mdo_addr); 63 testptr(obj, TypeEntries::type_klass_mask); 64 jccb(Assembler::zero, next); // klass seen before, nothing to 65 // do. The unknown bit may have been 66 // set already but no need to check. 67 68 testptr(obj, TypeEntries::type_unknown); 69 jccb(Assembler::notZero, next); // already unknown. Nothing to do anymore. 70 71 cmpptr(mdo_addr, 0); 72 jccb(Assembler::equal, none); 73 cmpptr(mdo_addr, TypeEntries::null_seen); 74 jccb(Assembler::equal, none); 75 // There is a chance that the checks above (re-reading profiling 76 // data from memory) fail if another thread has just set the 77 // profiling to this obj's klass 78 xorptr(obj, mdo_addr); 79 testptr(obj, TypeEntries::type_klass_mask); 80 jccb(Assembler::zero, next); 81 82 // different than before. Cannot keep accurate profile. 83 orptr(mdo_addr, TypeEntries::type_unknown); 84 jmpb(next); 85 86 bind(none); 87 // first time here. Set profile type. 88 movptr(mdo_addr, obj); 89 90 bind(next); 91 } 92 93 void InterpreterMacroAssembler::profile_arguments_type(Register mdp, Register callee, Register tmp, bool is_virtual) { 94 if (!ProfileInterpreter) { 95 return; 96 } 97 98 if (MethodData::profile_arguments() || MethodData::profile_return()) { 99 Label profile_continue; 100 101 test_method_data_pointer(mdp, profile_continue); 102 103 int off_to_start = is_virtual ? in_bytes(VirtualCallData::virtual_call_data_size()) : in_bytes(CounterData::counter_data_size()); 104 105 cmpb(Address(mdp, in_bytes(DataLayout::tag_offset()) - off_to_start), is_virtual ? DataLayout::virtual_call_type_data_tag : DataLayout::call_type_data_tag); 106 jcc(Assembler::notEqual, profile_continue); 107 108 if (MethodData::profile_arguments()) { 109 Label done; 110 int off_to_args = in_bytes(TypeEntriesAtCall::args_data_offset()); 111 addptr(mdp, off_to_args); 112 113 for (int i = 0; i < TypeProfileArgsLimit; i++) { 114 if (i > 0 || MethodData::profile_return()) { 115 // If return value type is profiled we may have no argument to profile 116 movptr(tmp, Address(mdp, in_bytes(TypeEntriesAtCall::cell_count_offset())-off_to_args)); 117 subl(tmp, i*TypeStackSlotEntries::per_arg_count()); 118 cmpl(tmp, TypeStackSlotEntries::per_arg_count()); 119 jcc(Assembler::less, done); 120 } 121 movptr(tmp, Address(callee, Method::const_offset())); 122 load_unsigned_short(tmp, Address(tmp, ConstMethod::size_of_parameters_offset())); 123 // stack offset o (zero based) from the start of the argument 124 // list, for n arguments translates into offset n - o - 1 from 125 // the end of the argument list 126 subptr(tmp, Address(mdp, in_bytes(TypeEntriesAtCall::stack_slot_offset(i))-off_to_args)); 127 subl(tmp, 1); 128 Address arg_addr = argument_address(tmp); 129 movptr(tmp, arg_addr); 130 131 Address mdo_arg_addr(mdp, in_bytes(TypeEntriesAtCall::argument_type_offset(i))-off_to_args); 132 profile_obj_type(tmp, mdo_arg_addr); 133 134 int to_add = in_bytes(TypeStackSlotEntries::per_arg_size()); 135 addptr(mdp, to_add); 136 off_to_args += to_add; 137 } 138 139 if (MethodData::profile_return()) { 140 movptr(tmp, Address(mdp, in_bytes(TypeEntriesAtCall::cell_count_offset())-off_to_args)); 141 subl(tmp, TypeProfileArgsLimit*TypeStackSlotEntries::per_arg_count()); 142 } 143 144 bind(done); 145 146 if (MethodData::profile_return()) { 147 // We're right after the type profile for the last 148 // argument. tmp is the number of cells left in the 149 // CallTypeData/VirtualCallTypeData to reach its end. Non null 150 // if there's a return to profile. 151 assert(ReturnTypeEntry::static_cell_count() < TypeStackSlotEntries::per_arg_count(), "can't move past ret type"); 152 shll(tmp, exact_log2(DataLayout::cell_size)); 153 addptr(mdp, tmp); 154 } 155 movptr(Address(rbp, frame::interpreter_frame_mdp_offset * wordSize), mdp); 156 } else { 157 assert(MethodData::profile_return(), "either profile call args or call ret"); 158 update_mdp_by_constant(mdp, in_bytes(TypeEntriesAtCall::return_only_size())); 159 } 160 161 // mdp points right after the end of the 162 // CallTypeData/VirtualCallTypeData, right after the cells for the 163 // return value type if there's one 164 165 bind(profile_continue); 166 } 167 } 168 169 void InterpreterMacroAssembler::profile_return_type(Register mdp, Register ret, Register tmp) { 170 assert_different_registers(mdp, ret, tmp, _bcp_register); 171 if (ProfileInterpreter && MethodData::profile_return()) { 172 Label profile_continue, done; 173 174 test_method_data_pointer(mdp, profile_continue); 175 176 if (MethodData::profile_return_jsr292_only()) { 177 assert(Method::intrinsic_id_size_in_bytes() == 2, "assuming Method::_intrinsic_id is u2"); 178 179 // If we don't profile all invoke bytecodes we must make sure 180 // it's a bytecode we indeed profile. We can't go back to the 181 // begining of the ProfileData we intend to update to check its 182 // type because we're right after it and we don't known its 183 // length 184 Label do_profile; 185 cmpb(Address(_bcp_register, 0), Bytecodes::_invokedynamic); 186 jcc(Assembler::equal, do_profile); 187 cmpb(Address(_bcp_register, 0), Bytecodes::_invokehandle); 188 jcc(Assembler::equal, do_profile); 189 get_method(tmp); 190 cmpw(Address(tmp, Method::intrinsic_id_offset_in_bytes()), vmIntrinsics::_compiledLambdaForm); 191 jcc(Assembler::notEqual, profile_continue); 192 193 bind(do_profile); 194 } 195 196 Address mdo_ret_addr(mdp, -in_bytes(ReturnTypeEntry::size())); 197 mov(tmp, ret); 198 profile_obj_type(tmp, mdo_ret_addr); 199 200 bind(profile_continue); 201 } 202 } 203 204 void InterpreterMacroAssembler::profile_parameters_type(Register mdp, Register tmp1, Register tmp2) { 205 if (ProfileInterpreter && MethodData::profile_parameters()) { 206 Label profile_continue, done; 207 208 test_method_data_pointer(mdp, profile_continue); 209 210 // Load the offset of the area within the MDO used for 211 // parameters. If it's negative we're not profiling any parameters 212 movl(tmp1, Address(mdp, in_bytes(MethodData::parameters_type_data_di_offset()) - in_bytes(MethodData::data_offset()))); 213 testl(tmp1, tmp1); 214 jcc(Assembler::negative, profile_continue); 215 216 // Compute a pointer to the area for parameters from the offset 217 // and move the pointer to the slot for the last 218 // parameters. Collect profiling from last parameter down. 219 // mdo start + parameters offset + array length - 1 220 addptr(mdp, tmp1); 221 movptr(tmp1, Address(mdp, ArrayData::array_len_offset())); 222 decrement(tmp1, TypeStackSlotEntries::per_arg_count()); 223 224 Label loop; 225 bind(loop); 226 227 int off_base = in_bytes(ParametersTypeData::stack_slot_offset(0)); 228 int type_base = in_bytes(ParametersTypeData::type_offset(0)); 229 Address::ScaleFactor per_arg_scale = Address::times(DataLayout::cell_size); 230 Address arg_off(mdp, tmp1, per_arg_scale, off_base); 231 Address arg_type(mdp, tmp1, per_arg_scale, type_base); 232 233 // load offset on the stack from the slot for this parameter 234 movptr(tmp2, arg_off); 235 negptr(tmp2); 236 // read the parameter from the local area 237 movptr(tmp2, Address(_locals_register, tmp2, Interpreter::stackElementScale())); 238 239 // profile the parameter 240 profile_obj_type(tmp2, arg_type); 241 242 // go to next parameter 243 decrement(tmp1, TypeStackSlotEntries::per_arg_count()); 244 jcc(Assembler::positive, loop); 245 246 bind(profile_continue); 247 } 248 } 249 250 void InterpreterMacroAssembler::call_VM_leaf_base(address entry_point, 251 int number_of_arguments) { 252 // interpreter specific 253 // 254 // Note: No need to save/restore bcp & locals registers 255 // since these are callee saved registers and no blocking/ 256 // GC can happen in leaf calls. 257 // Further Note: DO NOT save/restore bcp/locals. If a caller has 258 // already saved them so that it can use rsi/rdi as temporaries 259 // then a save/restore here will DESTROY the copy the caller 260 // saved! There used to be a save_bcp() that only happened in 261 // the ASSERT path (no restore_bcp). Which caused bizarre failures 262 // when jvm built with ASSERTs. 263 #ifdef ASSERT 264 { 265 Label L; 266 cmpptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), (int32_t)NULL_WORD); 267 jcc(Assembler::equal, L); 268 stop("InterpreterMacroAssembler::call_VM_leaf_base:" 269 " last_sp != NULL"); 270 bind(L); 271 } 272 #endif 273 // super call 274 MacroAssembler::call_VM_leaf_base(entry_point, number_of_arguments); 275 // interpreter specific 276 // LP64: Used to ASSERT that r13/r14 were equal to frame's bcp/locals 277 // but since they may not have been saved (and we don't want to 278 // save them here (see note above) the assert is invalid. 279 } 280 281 void InterpreterMacroAssembler::call_VM_base(Register oop_result, 282 Register java_thread, 283 Register last_java_sp, 284 address entry_point, 285 int number_of_arguments, 286 bool check_exceptions) { 287 // interpreter specific 288 // 289 // Note: Could avoid restoring locals ptr (callee saved) - however doesn't 290 // really make a difference for these runtime calls, since they are 291 // slow anyway. Btw., bcp must be saved/restored since it may change 292 // due to GC. 293 NOT_LP64(assert(java_thread == noreg , "not expecting a precomputed java thread");) 294 save_bcp(); 295 #ifdef ASSERT 296 { 297 Label L; 298 cmpptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), (int32_t)NULL_WORD); 299 jcc(Assembler::equal, L); 300 stop("InterpreterMacroAssembler::call_VM_base:" 301 " last_sp != NULL"); 302 bind(L); 303 } 304 #endif /* ASSERT */ 305 // super call 306 MacroAssembler::call_VM_base(oop_result, noreg, last_java_sp, 307 entry_point, number_of_arguments, 308 check_exceptions); 309 // interpreter specific 310 restore_bcp(); 311 restore_locals(); 312 } 313 314 void InterpreterMacroAssembler::check_and_handle_popframe(Register java_thread) { 315 if (JvmtiExport::can_pop_frame()) { 316 Label L; 317 // Initiate popframe handling only if it is not already being 318 // processed. If the flag has the popframe_processing bit set, it 319 // means that this code is called *during* popframe handling - we 320 // don't want to reenter. 321 // This method is only called just after the call into the vm in 322 // call_VM_base, so the arg registers are available. 323 Register pop_cond = NOT_LP64(java_thread) // Not clear if any other register is available on 32 bit 324 LP64_ONLY(c_rarg0); 325 movl(pop_cond, Address(java_thread, JavaThread::popframe_condition_offset())); 326 testl(pop_cond, JavaThread::popframe_pending_bit); 327 jcc(Assembler::zero, L); 328 testl(pop_cond, JavaThread::popframe_processing_bit); 329 jcc(Assembler::notZero, L); 330 // Call Interpreter::remove_activation_preserving_args_entry() to get the 331 // address of the same-named entrypoint in the generated interpreter code. 332 call_VM_leaf(CAST_FROM_FN_PTR(address, Interpreter::remove_activation_preserving_args_entry)); 333 jmp(rax); 334 bind(L); 335 NOT_LP64(get_thread(java_thread);) 336 } 337 } 338 339 void InterpreterMacroAssembler::load_earlyret_value(TosState state) { 340 Register thread = LP64_ONLY(r15_thread) NOT_LP64(rcx); 341 NOT_LP64(get_thread(thread);) 342 movptr(rcx, Address(thread, JavaThread::jvmti_thread_state_offset())); 343 const Address tos_addr(rcx, JvmtiThreadState::earlyret_tos_offset()); 344 const Address oop_addr(rcx, JvmtiThreadState::earlyret_oop_offset()); 345 const Address val_addr(rcx, JvmtiThreadState::earlyret_value_offset()); 346 #ifdef _LP64 347 switch (state) { 348 case atos: movptr(rax, oop_addr); 349 movptr(oop_addr, (int32_t)NULL_WORD); 350 verify_oop(rax, state); break; 351 case ltos: movptr(rax, val_addr); break; 352 case btos: // fall through 353 case ztos: // fall through 354 case ctos: // fall through 355 case stos: // fall through 356 case itos: movl(rax, val_addr); break; 357 case ftos: load_float(val_addr); break; 358 case dtos: load_double(val_addr); break; 359 case vtos: /* nothing to do */ break; 360 default : ShouldNotReachHere(); 361 } 362 // Clean up tos value in the thread object 363 movl(tos_addr, (int) ilgl); 364 movl(val_addr, (int32_t) NULL_WORD); 365 #else 366 const Address val_addr1(rcx, JvmtiThreadState::earlyret_value_offset() 367 + in_ByteSize(wordSize)); 368 switch (state) { 369 case atos: movptr(rax, oop_addr); 370 movptr(oop_addr, NULL_WORD); 371 verify_oop(rax, state); break; 372 case ltos: 373 movl(rdx, val_addr1); // fall through 374 case btos: // fall through 375 case ztos: // fall through 376 case ctos: // fall through 377 case stos: // fall through 378 case itos: movl(rax, val_addr); break; 379 case ftos: load_float(val_addr); break; 380 case dtos: load_double(val_addr); break; 381 case vtos: /* nothing to do */ break; 382 default : ShouldNotReachHere(); 383 } 384 #endif // _LP64 385 // Clean up tos value in the thread object 386 movl(tos_addr, (int32_t) ilgl); 387 movptr(val_addr, NULL_WORD); 388 NOT_LP64(movptr(val_addr1, NULL_WORD);) 389 } 390 391 392 void InterpreterMacroAssembler::check_and_handle_earlyret(Register java_thread) { 393 if (JvmtiExport::can_force_early_return()) { 394 Label L; 395 Register tmp = LP64_ONLY(c_rarg0) NOT_LP64(java_thread); 396 Register rthread = LP64_ONLY(r15_thread) NOT_LP64(java_thread); 397 398 movptr(tmp, Address(rthread, JavaThread::jvmti_thread_state_offset())); 399 testptr(tmp, tmp); 400 jcc(Assembler::zero, L); // if (thread->jvmti_thread_state() == NULL) exit; 401 402 // Initiate earlyret handling only if it is not already being processed. 403 // If the flag has the earlyret_processing bit set, it means that this code 404 // is called *during* earlyret handling - we don't want to reenter. 405 movl(tmp, Address(tmp, JvmtiThreadState::earlyret_state_offset())); 406 cmpl(tmp, JvmtiThreadState::earlyret_pending); 407 jcc(Assembler::notEqual, L); 408 409 // Call Interpreter::remove_activation_early_entry() to get the address of the 410 // same-named entrypoint in the generated interpreter code. 411 NOT_LP64(get_thread(java_thread);) 412 movptr(tmp, Address(rthread, JavaThread::jvmti_thread_state_offset())); 413 #ifdef _LP64 414 movl(tmp, Address(tmp, JvmtiThreadState::earlyret_tos_offset())); 415 call_VM_leaf(CAST_FROM_FN_PTR(address, Interpreter::remove_activation_early_entry), tmp); 416 #else 417 pushl(Address(tmp, JvmtiThreadState::earlyret_tos_offset())); 418 call_VM_leaf(CAST_FROM_FN_PTR(address, Interpreter::remove_activation_early_entry), 1); 419 #endif // _LP64 420 jmp(rax); 421 bind(L); 422 NOT_LP64(get_thread(java_thread);) 423 } 424 } 425 426 void InterpreterMacroAssembler::get_unsigned_2_byte_index_at_bcp(Register reg, int bcp_offset) { 427 assert(bcp_offset >= 0, "bcp is still pointing to start of bytecode"); 428 load_unsigned_short(reg, Address(_bcp_register, bcp_offset)); 429 bswapl(reg); 430 shrl(reg, 16); 431 } 432 433 void InterpreterMacroAssembler::get_cache_index_at_bcp(Register index, 434 int bcp_offset, 435 size_t index_size) { 436 assert(bcp_offset > 0, "bcp is still pointing to start of bytecode"); 437 if (index_size == sizeof(u2)) { 438 load_unsigned_short(index, Address(_bcp_register, bcp_offset)); 439 } else if (index_size == sizeof(u4)) { 440 movl(index, Address(_bcp_register, bcp_offset)); 441 // Check if the secondary index definition is still ~x, otherwise 442 // we have to change the following assembler code to calculate the 443 // plain index. 444 assert(ConstantPool::decode_invokedynamic_index(~123) == 123, "else change next line"); 445 notl(index); // convert to plain index 446 } else if (index_size == sizeof(u1)) { 447 load_unsigned_byte(index, Address(_bcp_register, bcp_offset)); 448 } else { 449 ShouldNotReachHere(); 450 } 451 } 452 453 void InterpreterMacroAssembler::get_cache_and_index_at_bcp(Register cache, 454 Register index, 455 int bcp_offset, 456 size_t index_size) { 457 assert_different_registers(cache, index); 458 get_cache_index_at_bcp(index, bcp_offset, index_size); 459 movptr(cache, Address(rbp, frame::interpreter_frame_cache_offset * wordSize)); 460 assert(sizeof(ConstantPoolCacheEntry) == 4 * wordSize, "adjust code below"); 461 // convert from field index to ConstantPoolCacheEntry index 462 assert(exact_log2(in_words(ConstantPoolCacheEntry::size())) == 2, "else change next line"); 463 shll(index, 2); 464 } 465 466 void InterpreterMacroAssembler::get_cache_and_index_and_bytecode_at_bcp(Register cache, 467 Register index, 468 Register bytecode, 469 int byte_no, 470 int bcp_offset, 471 size_t index_size) { 472 get_cache_and_index_at_bcp(cache, index, bcp_offset, index_size); 473 // We use a 32-bit load here since the layout of 64-bit words on 474 // little-endian machines allow us that. 475 movl(bytecode, Address(cache, index, Address::times_ptr, ConstantPoolCache::base_offset() + ConstantPoolCacheEntry::indices_offset())); 476 const int shift_count = (1 + byte_no) * BitsPerByte; 477 assert((byte_no == TemplateTable::f1_byte && shift_count == ConstantPoolCacheEntry::bytecode_1_shift) || 478 (byte_no == TemplateTable::f2_byte && shift_count == ConstantPoolCacheEntry::bytecode_2_shift), 479 "correct shift count"); 480 shrl(bytecode, shift_count); 481 assert(ConstantPoolCacheEntry::bytecode_1_mask == ConstantPoolCacheEntry::bytecode_2_mask, "common mask"); 482 andl(bytecode, ConstantPoolCacheEntry::bytecode_1_mask); 483 } 484 485 void InterpreterMacroAssembler::get_cache_entry_pointer_at_bcp(Register cache, 486 Register tmp, 487 int bcp_offset, 488 size_t index_size) { 489 assert(cache != tmp, "must use different register"); 490 get_cache_index_at_bcp(tmp, bcp_offset, index_size); 491 assert(sizeof(ConstantPoolCacheEntry) == 4 * wordSize, "adjust code below"); 492 // convert from field index to ConstantPoolCacheEntry index 493 // and from word offset to byte offset 494 assert(exact_log2(in_bytes(ConstantPoolCacheEntry::size_in_bytes())) == 2 + LogBytesPerWord, "else change next line"); 495 shll(tmp, 2 + LogBytesPerWord); 496 movptr(cache, Address(rbp, frame::interpreter_frame_cache_offset * wordSize)); 497 // skip past the header 498 addptr(cache, in_bytes(ConstantPoolCache::base_offset())); 499 addptr(cache, tmp); // construct pointer to cache entry 500 } 501 502 // Load object from cpool->resolved_references(index) 503 void InterpreterMacroAssembler::load_resolved_reference_at_index( 504 Register result, Register index) { 505 assert_different_registers(result, index); 506 // convert from field index to resolved_references() index and from 507 // word index to byte offset. Since this is a java object, it can be compressed 508 Register tmp = index; // reuse 509 shll(tmp, LogBytesPerHeapOop); 510 511 get_constant_pool(result); 512 // load pointer for resolved_references[] objArray 513 movptr(result, Address(result, ConstantPool::cache_offset_in_bytes())); 514 movptr(result, Address(result, ConstantPoolCache::resolved_references_offset_in_bytes())); 515 resolve_oop_handle(result); 516 // Add in the index 517 addptr(result, tmp); 518 load_heap_oop(result, Address(result, arrayOopDesc::base_offset_in_bytes(T_OBJECT))); 519 } 520 521 // load cpool->resolved_klass_at(index) 522 void InterpreterMacroAssembler::load_resolved_klass_at_index(Register cpool, 523 Register index, Register klass) { 524 movw(index, Address(cpool, index, Address::times_ptr, sizeof(ConstantPool))); 525 Register resolved_klasses = cpool; 526 movptr(resolved_klasses, Address(cpool, ConstantPool::resolved_klasses_offset_in_bytes())); 527 movptr(klass, Address(resolved_klasses, index, Address::times_ptr, Array<Klass*>::base_offset_in_bytes())); 528 } 529 530 // Generate a subtype check: branch to ok_is_subtype if sub_klass is a 531 // subtype of super_klass. 532 // 533 // Args: 534 // rax: superklass 535 // Rsub_klass: subklass 536 // 537 // Kills: 538 // rcx, rdi 539 void InterpreterMacroAssembler::gen_subtype_check(Register Rsub_klass, 540 Label& ok_is_subtype) { 541 assert(Rsub_klass != rax, "rax holds superklass"); 542 LP64_ONLY(assert(Rsub_klass != r14, "r14 holds locals");) 543 LP64_ONLY(assert(Rsub_klass != r13, "r13 holds bcp");) 544 assert(Rsub_klass != rcx, "rcx holds 2ndary super array length"); 545 assert(Rsub_klass != rdi, "rdi holds 2ndary super array scan ptr"); 546 547 // Profile the not-null value's klass. 548 profile_typecheck(rcx, Rsub_klass, rdi); // blows rcx, reloads rdi 549 550 // Do the check. 551 check_klass_subtype(Rsub_klass, rax, rcx, ok_is_subtype); // blows rcx 552 553 // Profile the failure of the check. 554 profile_typecheck_failed(rcx); // blows rcx 555 } 556 557 558 #ifndef _LP64 559 void InterpreterMacroAssembler::f2ieee() { 560 if (IEEEPrecision) { 561 fstp_s(Address(rsp, 0)); 562 fld_s(Address(rsp, 0)); 563 } 564 } 565 566 567 void InterpreterMacroAssembler::d2ieee() { 568 if (IEEEPrecision) { 569 fstp_d(Address(rsp, 0)); 570 fld_d(Address(rsp, 0)); 571 } 572 } 573 #endif // _LP64 574 575 // Java Expression Stack 576 577 void InterpreterMacroAssembler::pop_ptr(Register r) { 578 pop(r); 579 } 580 581 void InterpreterMacroAssembler::push_ptr(Register r) { 582 push(r); 583 } 584 585 void InterpreterMacroAssembler::push_i(Register r) { 586 push(r); 587 } 588 589 void InterpreterMacroAssembler::push_f(XMMRegister r) { 590 subptr(rsp, wordSize); 591 movflt(Address(rsp, 0), r); 592 } 593 594 void InterpreterMacroAssembler::pop_f(XMMRegister r) { 595 movflt(r, Address(rsp, 0)); 596 addptr(rsp, wordSize); 597 } 598 599 void InterpreterMacroAssembler::push_d(XMMRegister r) { 600 subptr(rsp, 2 * wordSize); 601 movdbl(Address(rsp, 0), r); 602 } 603 604 void InterpreterMacroAssembler::pop_d(XMMRegister r) { 605 movdbl(r, Address(rsp, 0)); 606 addptr(rsp, 2 * Interpreter::stackElementSize); 607 } 608 609 #ifdef _LP64 610 void InterpreterMacroAssembler::pop_i(Register r) { 611 // XXX can't use pop currently, upper half non clean 612 movl(r, Address(rsp, 0)); 613 addptr(rsp, wordSize); 614 } 615 616 void InterpreterMacroAssembler::pop_l(Register r) { 617 movq(r, Address(rsp, 0)); 618 addptr(rsp, 2 * Interpreter::stackElementSize); 619 } 620 621 void InterpreterMacroAssembler::push_l(Register r) { 622 subptr(rsp, 2 * wordSize); 623 movptr(Address(rsp, Interpreter::expr_offset_in_bytes(0)), r ); 624 movptr(Address(rsp, Interpreter::expr_offset_in_bytes(1)), NULL_WORD ); 625 } 626 627 void InterpreterMacroAssembler::pop(TosState state) { 628 switch (state) { 629 case atos: pop_ptr(); break; 630 case btos: 631 case ztos: 632 case ctos: 633 case stos: 634 case itos: pop_i(); break; 635 case ltos: pop_l(); break; 636 case ftos: pop_f(xmm0); break; 637 case dtos: pop_d(xmm0); break; 638 case vtos: /* nothing to do */ break; 639 default: ShouldNotReachHere(); 640 } 641 verify_oop(rax, state); 642 } 643 644 void InterpreterMacroAssembler::push(TosState state) { 645 verify_oop(rax, state); 646 switch (state) { 647 case atos: push_ptr(); break; 648 case btos: 649 case ztos: 650 case ctos: 651 case stos: 652 case itos: push_i(); break; 653 case ltos: push_l(); break; 654 case ftos: push_f(xmm0); break; 655 case dtos: push_d(xmm0); break; 656 case vtos: /* nothing to do */ break; 657 default : ShouldNotReachHere(); 658 } 659 } 660 #else 661 void InterpreterMacroAssembler::pop_i(Register r) { 662 pop(r); 663 } 664 665 void InterpreterMacroAssembler::pop_l(Register lo, Register hi) { 666 pop(lo); 667 pop(hi); 668 } 669 670 void InterpreterMacroAssembler::pop_f() { 671 fld_s(Address(rsp, 0)); 672 addptr(rsp, 1 * wordSize); 673 } 674 675 void InterpreterMacroAssembler::pop_d() { 676 fld_d(Address(rsp, 0)); 677 addptr(rsp, 2 * wordSize); 678 } 679 680 681 void InterpreterMacroAssembler::pop(TosState state) { 682 switch (state) { 683 case atos: pop_ptr(rax); break; 684 case btos: // fall through 685 case ztos: // fall through 686 case ctos: // fall through 687 case stos: // fall through 688 case itos: pop_i(rax); break; 689 case ltos: pop_l(rax, rdx); break; 690 case ftos: 691 if (UseSSE >= 1) { 692 pop_f(xmm0); 693 } else { 694 pop_f(); 695 } 696 break; 697 case dtos: 698 if (UseSSE >= 2) { 699 pop_d(xmm0); 700 } else { 701 pop_d(); 702 } 703 break; 704 case vtos: /* nothing to do */ break; 705 default : ShouldNotReachHere(); 706 } 707 verify_oop(rax, state); 708 } 709 710 711 void InterpreterMacroAssembler::push_l(Register lo, Register hi) { 712 push(hi); 713 push(lo); 714 } 715 716 void InterpreterMacroAssembler::push_f() { 717 // Do not schedule for no AGI! Never write beyond rsp! 718 subptr(rsp, 1 * wordSize); 719 fstp_s(Address(rsp, 0)); 720 } 721 722 void InterpreterMacroAssembler::push_d() { 723 // Do not schedule for no AGI! Never write beyond rsp! 724 subptr(rsp, 2 * wordSize); 725 fstp_d(Address(rsp, 0)); 726 } 727 728 729 void InterpreterMacroAssembler::push(TosState state) { 730 verify_oop(rax, state); 731 switch (state) { 732 case atos: push_ptr(rax); break; 733 case btos: // fall through 734 case ztos: // fall through 735 case ctos: // fall through 736 case stos: // fall through 737 case itos: push_i(rax); break; 738 case ltos: push_l(rax, rdx); break; 739 case ftos: 740 if (UseSSE >= 1) { 741 push_f(xmm0); 742 } else { 743 push_f(); 744 } 745 break; 746 case dtos: 747 if (UseSSE >= 2) { 748 push_d(xmm0); 749 } else { 750 push_d(); 751 } 752 break; 753 case vtos: /* nothing to do */ break; 754 default : ShouldNotReachHere(); 755 } 756 } 757 #endif // _LP64 758 759 760 // Helpers for swap and dup 761 void InterpreterMacroAssembler::load_ptr(int n, Register val) { 762 movptr(val, Address(rsp, Interpreter::expr_offset_in_bytes(n))); 763 } 764 765 void InterpreterMacroAssembler::store_ptr(int n, Register val) { 766 movptr(Address(rsp, Interpreter::expr_offset_in_bytes(n)), val); 767 } 768 769 770 void InterpreterMacroAssembler::prepare_to_jump_from_interpreted() { 771 // set sender sp 772 lea(_bcp_register, Address(rsp, wordSize)); 773 // record last_sp 774 movptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), _bcp_register); 775 } 776 777 778 // Jump to from_interpreted entry of a call unless single stepping is possible 779 // in this thread in which case we must call the i2i entry 780 void InterpreterMacroAssembler::jump_from_interpreted(Register method, Register temp) { 781 prepare_to_jump_from_interpreted(); 782 783 if (JvmtiExport::can_post_interpreter_events()) { 784 Label run_compiled_code; 785 // JVMTI events, such as single-stepping, are implemented partly by avoiding running 786 // compiled code in threads for which the event is enabled. Check here for 787 // interp_only_mode if these events CAN be enabled. 788 // interp_only is an int, on little endian it is sufficient to test the byte only 789 // Is a cmpl faster? 790 LP64_ONLY(temp = r15_thread;) 791 NOT_LP64(get_thread(temp);) 792 cmpb(Address(temp, JavaThread::interp_only_mode_offset()), 0); 793 jccb(Assembler::zero, run_compiled_code); 794 jmp(Address(method, Method::interpreter_entry_offset())); 795 bind(run_compiled_code); 796 } 797 798 jmp(Address(method, Method::from_interpreted_offset())); 799 } 800 801 // The following two routines provide a hook so that an implementation 802 // can schedule the dispatch in two parts. x86 does not do this. 803 void InterpreterMacroAssembler::dispatch_prolog(TosState state, int step) { 804 // Nothing x86 specific to be done here 805 } 806 807 void InterpreterMacroAssembler::dispatch_epilog(TosState state, int step) { 808 dispatch_next(state, step); 809 } 810 811 void InterpreterMacroAssembler::dispatch_base(TosState state, 812 address* table, 813 bool verifyoop) { 814 verify_FPU(1, state); 815 if (VerifyActivationFrameSize) { 816 Label L; 817 mov(rcx, rbp); 818 subptr(rcx, rsp); 819 int32_t min_frame_size = 820 (frame::link_offset - frame::interpreter_frame_initial_sp_offset) * 821 wordSize; 822 cmpptr(rcx, (int32_t)min_frame_size); 823 jcc(Assembler::greaterEqual, L); 824 stop("broken stack frame"); 825 bind(L); 826 } 827 if (verifyoop) { 828 verify_oop(rax, state); 829 } 830 #ifdef _LP64 831 832 Label no_safepoint, dispatch; 833 address* const safepoint_table = Interpreter::safept_table(state); 834 if (SafepointMechanism::uses_thread_local_poll() && table != safepoint_table) { 835 NOT_PRODUCT(block_comment("Thread-local Safepoint poll")); 836 837 testb(Address(r15_thread, Thread::polling_page_offset()), SafepointMechanism::poll_bit()); 838 839 jccb(Assembler::zero, no_safepoint); 840 lea(rscratch1, ExternalAddress((address)safepoint_table)); 841 jmpb(dispatch); 842 } 843 844 bind(no_safepoint); 845 lea(rscratch1, ExternalAddress((address)table)); 846 bind(dispatch); 847 jmp(Address(rscratch1, rbx, Address::times_8)); 848 849 #else 850 Address index(noreg, rbx, Address::times_ptr); 851 ExternalAddress tbl((address)table); 852 ArrayAddress dispatch(tbl, index); 853 jump(dispatch); 854 #endif // _LP64 855 } 856 857 void InterpreterMacroAssembler::dispatch_only(TosState state) { 858 dispatch_base(state, Interpreter::dispatch_table(state)); 859 } 860 861 void InterpreterMacroAssembler::dispatch_only_normal(TosState state) { 862 dispatch_base(state, Interpreter::normal_table(state)); 863 } 864 865 void InterpreterMacroAssembler::dispatch_only_noverify(TosState state) { 866 dispatch_base(state, Interpreter::normal_table(state), false); 867 } 868 869 870 void InterpreterMacroAssembler::dispatch_next(TosState state, int step) { 871 // load next bytecode (load before advancing _bcp_register to prevent AGI) 872 load_unsigned_byte(rbx, Address(_bcp_register, step)); 873 // advance _bcp_register 874 increment(_bcp_register, step); 875 dispatch_base(state, Interpreter::dispatch_table(state)); 876 } 877 878 void InterpreterMacroAssembler::dispatch_via(TosState state, address* table) { 879 // load current bytecode 880 load_unsigned_byte(rbx, Address(_bcp_register, 0)); 881 dispatch_base(state, table); 882 } 883 884 void InterpreterMacroAssembler::narrow(Register result) { 885 886 // Get method->_constMethod->_result_type 887 movptr(rcx, Address(rbp, frame::interpreter_frame_method_offset * wordSize)); 888 movptr(rcx, Address(rcx, Method::const_offset())); 889 load_unsigned_byte(rcx, Address(rcx, ConstMethod::result_type_offset())); 890 891 Label done, notBool, notByte, notChar; 892 893 // common case first 894 cmpl(rcx, T_INT); 895 jcc(Assembler::equal, done); 896 897 // mask integer result to narrower return type. 898 cmpl(rcx, T_BOOLEAN); 899 jcc(Assembler::notEqual, notBool); 900 andl(result, 0x1); 901 jmp(done); 902 903 bind(notBool); 904 cmpl(rcx, T_BYTE); 905 jcc(Assembler::notEqual, notByte); 906 LP64_ONLY(movsbl(result, result);) 907 NOT_LP64(shll(result, 24);) // truncate upper 24 bits 908 NOT_LP64(sarl(result, 24);) // and sign-extend byte 909 jmp(done); 910 911 bind(notByte); 912 cmpl(rcx, T_CHAR); 913 jcc(Assembler::notEqual, notChar); 914 LP64_ONLY(movzwl(result, result);) 915 NOT_LP64(andl(result, 0xFFFF);) // truncate upper 16 bits 916 jmp(done); 917 918 bind(notChar); 919 // cmpl(rcx, T_SHORT); // all that's left 920 // jcc(Assembler::notEqual, done); 921 LP64_ONLY(movswl(result, result);) 922 NOT_LP64(shll(result, 16);) // truncate upper 16 bits 923 NOT_LP64(sarl(result, 16);) // and sign-extend short 924 925 // Nothing to do for T_INT 926 bind(done); 927 } 928 929 // remove activation 930 // 931 // Unlock the receiver if this is a synchronized method. 932 // Unlock any Java monitors from syncronized blocks. 933 // Remove the activation from the stack. 934 // 935 // If there are locked Java monitors 936 // If throw_monitor_exception 937 // throws IllegalMonitorStateException 938 // Else if install_monitor_exception 939 // installs IllegalMonitorStateException 940 // Else 941 // no error processing 942 void InterpreterMacroAssembler::remove_activation( 943 TosState state, 944 Register ret_addr, 945 bool throw_monitor_exception, 946 bool install_monitor_exception, 947 bool notify_jvmdi) { 948 // Note: Registers rdx xmm0 may be in use for the 949 // result check if synchronized method 950 Label unlocked, unlock, no_unlock; 951 952 const Register rthread = LP64_ONLY(r15_thread) NOT_LP64(rcx); 953 const Register robj = LP64_ONLY(c_rarg1) NOT_LP64(rdx); 954 const Register rmon = LP64_ONLY(c_rarg1) NOT_LP64(rcx); 955 // monitor pointers need different register 956 // because rdx may have the result in it 957 NOT_LP64(get_thread(rcx);) 958 959 // get the value of _do_not_unlock_if_synchronized into rdx 960 const Address do_not_unlock_if_synchronized(rthread, 961 in_bytes(JavaThread::do_not_unlock_if_synchronized_offset())); 962 movbool(rbx, do_not_unlock_if_synchronized); 963 movbool(do_not_unlock_if_synchronized, false); // reset the flag 964 965 // get method access flags 966 movptr(rcx, Address(rbp, frame::interpreter_frame_method_offset * wordSize)); 967 movl(rcx, Address(rcx, Method::access_flags_offset())); 968 testl(rcx, JVM_ACC_SYNCHRONIZED); 969 jcc(Assembler::zero, unlocked); 970 971 // Don't unlock anything if the _do_not_unlock_if_synchronized flag 972 // is set. 973 testbool(rbx); 974 jcc(Assembler::notZero, no_unlock); 975 976 // unlock monitor 977 push(state); // save result 978 979 // BasicObjectLock will be first in list, since this is a 980 // synchronized method. However, need to check that the object has 981 // not been unlocked by an explicit monitorexit bytecode. 982 const Address monitor(rbp, frame::interpreter_frame_initial_sp_offset * 983 wordSize - (int) sizeof(BasicObjectLock)); 984 // We use c_rarg1/rdx so that if we go slow path it will be the correct 985 // register for unlock_object to pass to VM directly 986 lea(robj, monitor); // address of first monitor 987 988 movptr(rax, Address(robj, BasicObjectLock::obj_offset_in_bytes())); 989 testptr(rax, rax); 990 jcc(Assembler::notZero, unlock); 991 992 pop(state); 993 if (throw_monitor_exception) { 994 // Entry already unlocked, need to throw exception 995 NOT_LP64(empty_FPU_stack();) // remove possible return value from FPU-stack, otherwise stack could overflow 996 call_VM(noreg, CAST_FROM_FN_PTR(address, 997 InterpreterRuntime::throw_illegal_monitor_state_exception)); 998 should_not_reach_here(); 999 } else { 1000 // Monitor already unlocked during a stack unroll. If requested, 1001 // install an illegal_monitor_state_exception. Continue with 1002 // stack unrolling. 1003 if (install_monitor_exception) { 1004 NOT_LP64(empty_FPU_stack();) 1005 call_VM(noreg, CAST_FROM_FN_PTR(address, 1006 InterpreterRuntime::new_illegal_monitor_state_exception)); 1007 } 1008 jmp(unlocked); 1009 } 1010 1011 bind(unlock); 1012 unlock_object(robj); 1013 pop(state); 1014 1015 // Check that for block-structured locking (i.e., that all locked 1016 // objects has been unlocked) 1017 bind(unlocked); 1018 1019 // rax, rdx: Might contain return value 1020 1021 // Check that all monitors are unlocked 1022 { 1023 Label loop, exception, entry, restart; 1024 const int entry_size = frame::interpreter_frame_monitor_size() * wordSize; 1025 const Address monitor_block_top( 1026 rbp, frame::interpreter_frame_monitor_block_top_offset * wordSize); 1027 const Address monitor_block_bot( 1028 rbp, frame::interpreter_frame_initial_sp_offset * wordSize); 1029 1030 bind(restart); 1031 // We use c_rarg1 so that if we go slow path it will be the correct 1032 // register for unlock_object to pass to VM directly 1033 movptr(rmon, monitor_block_top); // points to current entry, starting 1034 // with top-most entry 1035 lea(rbx, monitor_block_bot); // points to word before bottom of 1036 // monitor block 1037 jmp(entry); 1038 1039 // Entry already locked, need to throw exception 1040 bind(exception); 1041 1042 if (throw_monitor_exception) { 1043 // Throw exception 1044 NOT_LP64(empty_FPU_stack();) 1045 MacroAssembler::call_VM(noreg, 1046 CAST_FROM_FN_PTR(address, InterpreterRuntime:: 1047 throw_illegal_monitor_state_exception)); 1048 should_not_reach_here(); 1049 } else { 1050 // Stack unrolling. Unlock object and install illegal_monitor_exception. 1051 // Unlock does not block, so don't have to worry about the frame. 1052 // We don't have to preserve c_rarg1 since we are going to throw an exception. 1053 1054 push(state); 1055 mov(robj, rmon); // nop if robj and rmon are the same 1056 unlock_object(robj); 1057 pop(state); 1058 1059 if (install_monitor_exception) { 1060 NOT_LP64(empty_FPU_stack();) 1061 call_VM(noreg, CAST_FROM_FN_PTR(address, 1062 InterpreterRuntime:: 1063 new_illegal_monitor_state_exception)); 1064 } 1065 1066 jmp(restart); 1067 } 1068 1069 bind(loop); 1070 // check if current entry is used 1071 cmpptr(Address(rmon, BasicObjectLock::obj_offset_in_bytes()), (int32_t) NULL); 1072 jcc(Assembler::notEqual, exception); 1073 1074 addptr(rmon, entry_size); // otherwise advance to next entry 1075 bind(entry); 1076 cmpptr(rmon, rbx); // check if bottom reached 1077 jcc(Assembler::notEqual, loop); // if not at bottom then check this entry 1078 } 1079 1080 bind(no_unlock); 1081 1082 // jvmti support 1083 if (notify_jvmdi) { 1084 notify_method_exit(state, NotifyJVMTI); // preserve TOSCA 1085 } else { 1086 notify_method_exit(state, SkipNotifyJVMTI); // preserve TOSCA 1087 } 1088 1089 // remove activation 1090 // get sender sp 1091 movptr(rbx, 1092 Address(rbp, frame::interpreter_frame_sender_sp_offset * wordSize)); 1093 if (StackReservedPages > 0) { 1094 // testing if reserved zone needs to be re-enabled 1095 Register rthread = LP64_ONLY(r15_thread) NOT_LP64(rcx); 1096 Label no_reserved_zone_enabling; 1097 1098 NOT_LP64(get_thread(rthread);) 1099 1100 cmpl(Address(rthread, JavaThread::stack_guard_state_offset()), JavaThread::stack_guard_enabled); 1101 jcc(Assembler::equal, no_reserved_zone_enabling); 1102 1103 cmpptr(rbx, Address(rthread, JavaThread::reserved_stack_activation_offset())); 1104 jcc(Assembler::lessEqual, no_reserved_zone_enabling); 1105 1106 call_VM_leaf( 1107 CAST_FROM_FN_PTR(address, SharedRuntime::enable_stack_reserved_zone), rthread); 1108 call_VM(noreg, CAST_FROM_FN_PTR(address, 1109 InterpreterRuntime::throw_delayed_StackOverflowError)); 1110 should_not_reach_here(); 1111 1112 bind(no_reserved_zone_enabling); 1113 } 1114 leave(); // remove frame anchor 1115 pop(ret_addr); // get return address 1116 mov(rsp, rbx); // set sp to sender sp 1117 } 1118 1119 void InterpreterMacroAssembler::get_method_counters(Register method, 1120 Register mcs, Label& skip) { 1121 Label has_counters; 1122 movptr(mcs, Address(method, Method::method_counters_offset())); 1123 testptr(mcs, mcs); 1124 jcc(Assembler::notZero, has_counters); 1125 call_VM(noreg, CAST_FROM_FN_PTR(address, 1126 InterpreterRuntime::build_method_counters), method); 1127 movptr(mcs, Address(method,Method::method_counters_offset())); 1128 testptr(mcs, mcs); 1129 jcc(Assembler::zero, skip); // No MethodCounters allocated, OutOfMemory 1130 bind(has_counters); 1131 } 1132 1133 1134 // Lock object 1135 // 1136 // Args: 1137 // rdx, c_rarg1: BasicObjectLock to be used for locking 1138 // 1139 // Kills: 1140 // rax, rbx 1141 void InterpreterMacroAssembler::lock_object(Register lock_reg) { 1142 assert(lock_reg == LP64_ONLY(c_rarg1) NOT_LP64(rdx), 1143 "The argument is only for looks. It must be c_rarg1"); 1144 1145 if (UseHeavyMonitors) { 1146 call_VM(noreg, 1147 CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorenter), 1148 lock_reg); 1149 } else { 1150 Label done; 1151 1152 const Register swap_reg = rax; // Must use rax for cmpxchg instruction 1153 const Register tmp_reg = rbx; // Will be passed to biased_locking_enter to avoid a 1154 // problematic case where tmp_reg = no_reg. 1155 const Register obj_reg = LP64_ONLY(c_rarg3) NOT_LP64(rcx); // Will contain the oop 1156 1157 const int obj_offset = BasicObjectLock::obj_offset_in_bytes(); 1158 const int lock_offset = BasicObjectLock::lock_offset_in_bytes (); 1159 const int mark_offset = lock_offset + 1160 BasicLock::displaced_header_offset_in_bytes(); 1161 1162 Label slow_case; 1163 1164 // Load object pointer into obj_reg 1165 movptr(obj_reg, Address(lock_reg, obj_offset)); 1166 1167 if (UseBiasedLocking) { 1168 biased_locking_enter(lock_reg, obj_reg, swap_reg, tmp_reg, false, done, &slow_case); 1169 } 1170 1171 // Load immediate 1 into swap_reg %rax 1172 movl(swap_reg, (int32_t)1); 1173 1174 // Load (object->mark() | 1) into swap_reg %rax 1175 orptr(swap_reg, Address(obj_reg, oopDesc::mark_offset_in_bytes())); 1176 1177 // Save (object->mark() | 1) into BasicLock's displaced header 1178 movptr(Address(lock_reg, mark_offset), swap_reg); 1179 1180 assert(lock_offset == 0, 1181 "displaced header must be first word in BasicObjectLock"); 1182 1183 if (os::is_MP()) lock(); 1184 cmpxchgptr(lock_reg, Address(obj_reg, oopDesc::mark_offset_in_bytes())); 1185 if (PrintBiasedLockingStatistics) { 1186 cond_inc32(Assembler::zero, 1187 ExternalAddress((address) BiasedLocking::fast_path_entry_count_addr())); 1188 } 1189 jcc(Assembler::zero, done); 1190 1191 const int zero_bits = LP64_ONLY(7) NOT_LP64(3); 1192 1193 // Test if the oopMark is an obvious stack pointer, i.e., 1194 // 1) (mark & zero_bits) == 0, and 1195 // 2) rsp <= mark < mark + os::pagesize() 1196 // 1197 // These 3 tests can be done by evaluating the following 1198 // expression: ((mark - rsp) & (zero_bits - os::vm_page_size())), 1199 // assuming both stack pointer and pagesize have their 1200 // least significant bits clear. 1201 // NOTE: the oopMark is in swap_reg %rax as the result of cmpxchg 1202 subptr(swap_reg, rsp); 1203 andptr(swap_reg, zero_bits - os::vm_page_size()); 1204 1205 // Save the test result, for recursive case, the result is zero 1206 movptr(Address(lock_reg, mark_offset), swap_reg); 1207 1208 if (PrintBiasedLockingStatistics) { 1209 cond_inc32(Assembler::zero, 1210 ExternalAddress((address) BiasedLocking::fast_path_entry_count_addr())); 1211 } 1212 jcc(Assembler::zero, done); 1213 1214 bind(slow_case); 1215 1216 // Call the runtime routine for slow case 1217 call_VM(noreg, 1218 CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorenter), 1219 lock_reg); 1220 1221 bind(done); 1222 } 1223 } 1224 1225 1226 // Unlocks an object. Used in monitorexit bytecode and 1227 // remove_activation. Throws an IllegalMonitorException if object is 1228 // not locked by current thread. 1229 // 1230 // Args: 1231 // rdx, c_rarg1: BasicObjectLock for lock 1232 // 1233 // Kills: 1234 // rax 1235 // c_rarg0, c_rarg1, c_rarg2, c_rarg3, ... (param regs) 1236 // rscratch1 (scratch reg) 1237 // rax, rbx, rcx, rdx 1238 void InterpreterMacroAssembler::unlock_object(Register lock_reg) { 1239 assert(lock_reg == LP64_ONLY(c_rarg1) NOT_LP64(rdx), 1240 "The argument is only for looks. It must be c_rarg1"); 1241 1242 if (UseHeavyMonitors) { 1243 call_VM(noreg, 1244 CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorexit), 1245 lock_reg); 1246 } else { 1247 Label done; 1248 1249 const Register swap_reg = rax; // Must use rax for cmpxchg instruction 1250 const Register header_reg = LP64_ONLY(c_rarg2) NOT_LP64(rbx); // Will contain the old oopMark 1251 const Register obj_reg = LP64_ONLY(c_rarg3) NOT_LP64(rcx); // Will contain the oop 1252 1253 save_bcp(); // Save in case of exception 1254 1255 // Convert from BasicObjectLock structure to object and BasicLock 1256 // structure Store the BasicLock address into %rax 1257 lea(swap_reg, Address(lock_reg, BasicObjectLock::lock_offset_in_bytes())); 1258 1259 // Load oop into obj_reg(%c_rarg3) 1260 movptr(obj_reg, Address(lock_reg, BasicObjectLock::obj_offset_in_bytes())); 1261 1262 // Free entry 1263 movptr(Address(lock_reg, BasicObjectLock::obj_offset_in_bytes()), (int32_t)NULL_WORD); 1264 1265 if (UseBiasedLocking) { 1266 biased_locking_exit(obj_reg, header_reg, done); 1267 } 1268 1269 // Load the old header from BasicLock structure 1270 movptr(header_reg, Address(swap_reg, 1271 BasicLock::displaced_header_offset_in_bytes())); 1272 1273 // Test for recursion 1274 testptr(header_reg, header_reg); 1275 1276 // zero for recursive case 1277 jcc(Assembler::zero, done); 1278 1279 // Atomic swap back the old header 1280 if (os::is_MP()) lock(); 1281 cmpxchgptr(header_reg, Address(obj_reg, oopDesc::mark_offset_in_bytes())); 1282 1283 // zero for simple unlock of a stack-lock case 1284 jcc(Assembler::zero, done); 1285 1286 // Call the runtime routine for slow case. 1287 movptr(Address(lock_reg, BasicObjectLock::obj_offset_in_bytes()), 1288 obj_reg); // restore obj 1289 call_VM(noreg, 1290 CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorexit), 1291 lock_reg); 1292 1293 bind(done); 1294 1295 restore_bcp(); 1296 } 1297 } 1298 1299 void InterpreterMacroAssembler::test_method_data_pointer(Register mdp, 1300 Label& zero_continue) { 1301 assert(ProfileInterpreter, "must be profiling interpreter"); 1302 movptr(mdp, Address(rbp, frame::interpreter_frame_mdp_offset * wordSize)); 1303 testptr(mdp, mdp); 1304 jcc(Assembler::zero, zero_continue); 1305 } 1306 1307 1308 // Set the method data pointer for the current bcp. 1309 void InterpreterMacroAssembler::set_method_data_pointer_for_bcp() { 1310 assert(ProfileInterpreter, "must be profiling interpreter"); 1311 Label set_mdp; 1312 push(rax); 1313 push(rbx); 1314 1315 get_method(rbx); 1316 // Test MDO to avoid the call if it is NULL. 1317 movptr(rax, Address(rbx, in_bytes(Method::method_data_offset()))); 1318 testptr(rax, rax); 1319 jcc(Assembler::zero, set_mdp); 1320 // rbx: method 1321 // _bcp_register: bcp 1322 call_VM_leaf(CAST_FROM_FN_PTR(address, InterpreterRuntime::bcp_to_di), rbx, _bcp_register); 1323 // rax: mdi 1324 // mdo is guaranteed to be non-zero here, we checked for it before the call. 1325 movptr(rbx, Address(rbx, in_bytes(Method::method_data_offset()))); 1326 addptr(rbx, in_bytes(MethodData::data_offset())); 1327 addptr(rax, rbx); 1328 bind(set_mdp); 1329 movptr(Address(rbp, frame::interpreter_frame_mdp_offset * wordSize), rax); 1330 pop(rbx); 1331 pop(rax); 1332 } 1333 1334 void InterpreterMacroAssembler::verify_method_data_pointer() { 1335 assert(ProfileInterpreter, "must be profiling interpreter"); 1336 #ifdef ASSERT 1337 Label verify_continue; 1338 push(rax); 1339 push(rbx); 1340 Register arg3_reg = LP64_ONLY(c_rarg3) NOT_LP64(rcx); 1341 Register arg2_reg = LP64_ONLY(c_rarg2) NOT_LP64(rdx); 1342 push(arg3_reg); 1343 push(arg2_reg); 1344 test_method_data_pointer(arg3_reg, verify_continue); // If mdp is zero, continue 1345 get_method(rbx); 1346 1347 // If the mdp is valid, it will point to a DataLayout header which is 1348 // consistent with the bcp. The converse is highly probable also. 1349 load_unsigned_short(arg2_reg, 1350 Address(arg3_reg, in_bytes(DataLayout::bci_offset()))); 1351 addptr(arg2_reg, Address(rbx, Method::const_offset())); 1352 lea(arg2_reg, Address(arg2_reg, ConstMethod::codes_offset())); 1353 cmpptr(arg2_reg, _bcp_register); 1354 jcc(Assembler::equal, verify_continue); 1355 // rbx: method 1356 // _bcp_register: bcp 1357 // c_rarg3: mdp 1358 call_VM_leaf(CAST_FROM_FN_PTR(address, InterpreterRuntime::verify_mdp), 1359 rbx, _bcp_register, arg3_reg); 1360 bind(verify_continue); 1361 pop(arg2_reg); 1362 pop(arg3_reg); 1363 pop(rbx); 1364 pop(rax); 1365 #endif // ASSERT 1366 } 1367 1368 1369 void InterpreterMacroAssembler::set_mdp_data_at(Register mdp_in, 1370 int constant, 1371 Register value) { 1372 assert(ProfileInterpreter, "must be profiling interpreter"); 1373 Address data(mdp_in, constant); 1374 movptr(data, value); 1375 } 1376 1377 1378 void InterpreterMacroAssembler::increment_mdp_data_at(Register mdp_in, 1379 int constant, 1380 bool decrement) { 1381 // Counter address 1382 Address data(mdp_in, constant); 1383 1384 increment_mdp_data_at(data, decrement); 1385 } 1386 1387 void InterpreterMacroAssembler::increment_mdp_data_at(Address data, 1388 bool decrement) { 1389 assert(ProfileInterpreter, "must be profiling interpreter"); 1390 // %%% this does 64bit counters at best it is wasting space 1391 // at worst it is a rare bug when counters overflow 1392 1393 if (decrement) { 1394 // Decrement the register. Set condition codes. 1395 addptr(data, (int32_t) -DataLayout::counter_increment); 1396 // If the decrement causes the counter to overflow, stay negative 1397 Label L; 1398 jcc(Assembler::negative, L); 1399 addptr(data, (int32_t) DataLayout::counter_increment); 1400 bind(L); 1401 } else { 1402 assert(DataLayout::counter_increment == 1, 1403 "flow-free idiom only works with 1"); 1404 // Increment the register. Set carry flag. 1405 addptr(data, DataLayout::counter_increment); 1406 // If the increment causes the counter to overflow, pull back by 1. 1407 sbbptr(data, (int32_t)0); 1408 } 1409 } 1410 1411 1412 void InterpreterMacroAssembler::increment_mdp_data_at(Register mdp_in, 1413 Register reg, 1414 int constant, 1415 bool decrement) { 1416 Address data(mdp_in, reg, Address::times_1, constant); 1417 1418 increment_mdp_data_at(data, decrement); 1419 } 1420 1421 void InterpreterMacroAssembler::set_mdp_flag_at(Register mdp_in, 1422 int flag_byte_constant) { 1423 assert(ProfileInterpreter, "must be profiling interpreter"); 1424 int header_offset = in_bytes(DataLayout::header_offset()); 1425 int header_bits = DataLayout::flag_mask_to_header_mask(flag_byte_constant); 1426 // Set the flag 1427 orl(Address(mdp_in, header_offset), header_bits); 1428 } 1429 1430 1431 1432 void InterpreterMacroAssembler::test_mdp_data_at(Register mdp_in, 1433 int offset, 1434 Register value, 1435 Register test_value_out, 1436 Label& not_equal_continue) { 1437 assert(ProfileInterpreter, "must be profiling interpreter"); 1438 if (test_value_out == noreg) { 1439 cmpptr(value, Address(mdp_in, offset)); 1440 } else { 1441 // Put the test value into a register, so caller can use it: 1442 movptr(test_value_out, Address(mdp_in, offset)); 1443 cmpptr(test_value_out, value); 1444 } 1445 jcc(Assembler::notEqual, not_equal_continue); 1446 } 1447 1448 1449 void InterpreterMacroAssembler::update_mdp_by_offset(Register mdp_in, 1450 int offset_of_disp) { 1451 assert(ProfileInterpreter, "must be profiling interpreter"); 1452 Address disp_address(mdp_in, offset_of_disp); 1453 addptr(mdp_in, disp_address); 1454 movptr(Address(rbp, frame::interpreter_frame_mdp_offset * wordSize), mdp_in); 1455 } 1456 1457 1458 void InterpreterMacroAssembler::update_mdp_by_offset(Register mdp_in, 1459 Register reg, 1460 int offset_of_disp) { 1461 assert(ProfileInterpreter, "must be profiling interpreter"); 1462 Address disp_address(mdp_in, reg, Address::times_1, offset_of_disp); 1463 addptr(mdp_in, disp_address); 1464 movptr(Address(rbp, frame::interpreter_frame_mdp_offset * wordSize), mdp_in); 1465 } 1466 1467 1468 void InterpreterMacroAssembler::update_mdp_by_constant(Register mdp_in, 1469 int constant) { 1470 assert(ProfileInterpreter, "must be profiling interpreter"); 1471 addptr(mdp_in, constant); 1472 movptr(Address(rbp, frame::interpreter_frame_mdp_offset * wordSize), mdp_in); 1473 } 1474 1475 1476 void InterpreterMacroAssembler::update_mdp_for_ret(Register return_bci) { 1477 assert(ProfileInterpreter, "must be profiling interpreter"); 1478 push(return_bci); // save/restore across call_VM 1479 call_VM(noreg, 1480 CAST_FROM_FN_PTR(address, InterpreterRuntime::update_mdp_for_ret), 1481 return_bci); 1482 pop(return_bci); 1483 } 1484 1485 1486 void InterpreterMacroAssembler::profile_taken_branch(Register mdp, 1487 Register bumped_count) { 1488 if (ProfileInterpreter) { 1489 Label profile_continue; 1490 1491 // If no method data exists, go to profile_continue. 1492 // Otherwise, assign to mdp 1493 test_method_data_pointer(mdp, profile_continue); 1494 1495 // We are taking a branch. Increment the taken count. 1496 // We inline increment_mdp_data_at to return bumped_count in a register 1497 //increment_mdp_data_at(mdp, in_bytes(JumpData::taken_offset())); 1498 Address data(mdp, in_bytes(JumpData::taken_offset())); 1499 movptr(bumped_count, data); 1500 assert(DataLayout::counter_increment == 1, 1501 "flow-free idiom only works with 1"); 1502 addptr(bumped_count, DataLayout::counter_increment); 1503 sbbptr(bumped_count, 0); 1504 movptr(data, bumped_count); // Store back out 1505 1506 // The method data pointer needs to be updated to reflect the new target. 1507 update_mdp_by_offset(mdp, in_bytes(JumpData::displacement_offset())); 1508 bind(profile_continue); 1509 } 1510 } 1511 1512 1513 void InterpreterMacroAssembler::profile_not_taken_branch(Register mdp) { 1514 if (ProfileInterpreter) { 1515 Label profile_continue; 1516 1517 // If no method data exists, go to profile_continue. 1518 test_method_data_pointer(mdp, profile_continue); 1519 1520 // We are taking a branch. Increment the not taken count. 1521 increment_mdp_data_at(mdp, in_bytes(BranchData::not_taken_offset())); 1522 1523 // The method data pointer needs to be updated to correspond to 1524 // the next bytecode 1525 update_mdp_by_constant(mdp, in_bytes(BranchData::branch_data_size())); 1526 bind(profile_continue); 1527 } 1528 } 1529 1530 void InterpreterMacroAssembler::profile_call(Register mdp) { 1531 if (ProfileInterpreter) { 1532 Label profile_continue; 1533 1534 // If no method data exists, go to profile_continue. 1535 test_method_data_pointer(mdp, profile_continue); 1536 1537 // We are making a call. Increment the count. 1538 increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset())); 1539 1540 // The method data pointer needs to be updated to reflect the new target. 1541 update_mdp_by_constant(mdp, in_bytes(CounterData::counter_data_size())); 1542 bind(profile_continue); 1543 } 1544 } 1545 1546 1547 void InterpreterMacroAssembler::profile_final_call(Register mdp) { 1548 if (ProfileInterpreter) { 1549 Label profile_continue; 1550 1551 // If no method data exists, go to profile_continue. 1552 test_method_data_pointer(mdp, profile_continue); 1553 1554 // We are making a call. Increment the count. 1555 increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset())); 1556 1557 // The method data pointer needs to be updated to reflect the new target. 1558 update_mdp_by_constant(mdp, 1559 in_bytes(VirtualCallData:: 1560 virtual_call_data_size())); 1561 bind(profile_continue); 1562 } 1563 } 1564 1565 1566 void InterpreterMacroAssembler::profile_virtual_call(Register receiver, 1567 Register mdp, 1568 Register reg2, 1569 bool receiver_can_be_null) { 1570 if (ProfileInterpreter) { 1571 Label profile_continue; 1572 1573 // If no method data exists, go to profile_continue. 1574 test_method_data_pointer(mdp, profile_continue); 1575 1576 Label skip_receiver_profile; 1577 if (receiver_can_be_null) { 1578 Label not_null; 1579 testptr(receiver, receiver); 1580 jccb(Assembler::notZero, not_null); 1581 // We are making a call. Increment the count for null receiver. 1582 increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset())); 1583 jmp(skip_receiver_profile); 1584 bind(not_null); 1585 } 1586 1587 // Record the receiver type. 1588 record_klass_in_profile(receiver, mdp, reg2, true); 1589 bind(skip_receiver_profile); 1590 1591 // The method data pointer needs to be updated to reflect the new target. 1592 #if INCLUDE_JVMCI 1593 if (MethodProfileWidth == 0) { 1594 update_mdp_by_constant(mdp, in_bytes(VirtualCallData::virtual_call_data_size())); 1595 } 1596 #else // INCLUDE_JVMCI 1597 update_mdp_by_constant(mdp, 1598 in_bytes(VirtualCallData:: 1599 virtual_call_data_size())); 1600 #endif // INCLUDE_JVMCI 1601 bind(profile_continue); 1602 } 1603 } 1604 1605 #if INCLUDE_JVMCI 1606 void InterpreterMacroAssembler::profile_called_method(Register method, Register mdp, Register reg2) { 1607 assert_different_registers(method, mdp, reg2); 1608 if (ProfileInterpreter && MethodProfileWidth > 0) { 1609 Label profile_continue; 1610 1611 // If no method data exists, go to profile_continue. 1612 test_method_data_pointer(mdp, profile_continue); 1613 1614 Label done; 1615 record_item_in_profile_helper(method, mdp, reg2, 0, done, MethodProfileWidth, 1616 &VirtualCallData::method_offset, &VirtualCallData::method_count_offset, in_bytes(VirtualCallData::nonprofiled_receiver_count_offset())); 1617 bind(done); 1618 1619 update_mdp_by_constant(mdp, in_bytes(VirtualCallData::virtual_call_data_size())); 1620 bind(profile_continue); 1621 } 1622 } 1623 #endif // INCLUDE_JVMCI 1624 1625 // This routine creates a state machine for updating the multi-row 1626 // type profile at a virtual call site (or other type-sensitive bytecode). 1627 // The machine visits each row (of receiver/count) until the receiver type 1628 // is found, or until it runs out of rows. At the same time, it remembers 1629 // the location of the first empty row. (An empty row records null for its 1630 // receiver, and can be allocated for a newly-observed receiver type.) 1631 // Because there are two degrees of freedom in the state, a simple linear 1632 // search will not work; it must be a decision tree. Hence this helper 1633 // function is recursive, to generate the required tree structured code. 1634 // It's the interpreter, so we are trading off code space for speed. 1635 // See below for example code. 1636 void InterpreterMacroAssembler::record_klass_in_profile_helper( 1637 Register receiver, Register mdp, 1638 Register reg2, int start_row, 1639 Label& done, bool is_virtual_call) { 1640 if (TypeProfileWidth == 0) { 1641 if (is_virtual_call) { 1642 increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset())); 1643 } 1644 #if INCLUDE_JVMCI 1645 else if (EnableJVMCI) { 1646 increment_mdp_data_at(mdp, in_bytes(ReceiverTypeData::nonprofiled_receiver_count_offset())); 1647 } 1648 #endif // INCLUDE_JVMCI 1649 } else { 1650 int non_profiled_offset = -1; 1651 if (is_virtual_call) { 1652 non_profiled_offset = in_bytes(CounterData::count_offset()); 1653 } 1654 #if INCLUDE_JVMCI 1655 else if (EnableJVMCI) { 1656 non_profiled_offset = in_bytes(ReceiverTypeData::nonprofiled_receiver_count_offset()); 1657 } 1658 #endif // INCLUDE_JVMCI 1659 1660 record_item_in_profile_helper(receiver, mdp, reg2, 0, done, TypeProfileWidth, 1661 &VirtualCallData::receiver_offset, &VirtualCallData::receiver_count_offset, non_profiled_offset); 1662 } 1663 } 1664 1665 void InterpreterMacroAssembler::record_item_in_profile_helper(Register item, Register mdp, 1666 Register reg2, int start_row, Label& done, int total_rows, 1667 OffsetFunction item_offset_fn, OffsetFunction item_count_offset_fn, 1668 int non_profiled_offset) { 1669 int last_row = total_rows - 1; 1670 assert(start_row <= last_row, "must be work left to do"); 1671 // Test this row for both the item and for null. 1672 // Take any of three different outcomes: 1673 // 1. found item => increment count and goto done 1674 // 2. found null => keep looking for case 1, maybe allocate this cell 1675 // 3. found something else => keep looking for cases 1 and 2 1676 // Case 3 is handled by a recursive call. 1677 for (int row = start_row; row <= last_row; row++) { 1678 Label next_test; 1679 bool test_for_null_also = (row == start_row); 1680 1681 // See if the item is item[n]. 1682 int item_offset = in_bytes(item_offset_fn(row)); 1683 test_mdp_data_at(mdp, item_offset, item, 1684 (test_for_null_also ? reg2 : noreg), 1685 next_test); 1686 // (Reg2 now contains the item from the CallData.) 1687 1688 // The item is item[n]. Increment count[n]. 1689 int count_offset = in_bytes(item_count_offset_fn(row)); 1690 increment_mdp_data_at(mdp, count_offset); 1691 jmp(done); 1692 bind(next_test); 1693 1694 if (test_for_null_also) { 1695 Label found_null; 1696 // Failed the equality check on item[n]... Test for null. 1697 testptr(reg2, reg2); 1698 if (start_row == last_row) { 1699 // The only thing left to do is handle the null case. 1700 if (non_profiled_offset >= 0) { 1701 jccb(Assembler::zero, found_null); 1702 // Item did not match any saved item and there is no empty row for it. 1703 // Increment total counter to indicate polymorphic case. 1704 increment_mdp_data_at(mdp, non_profiled_offset); 1705 jmp(done); 1706 bind(found_null); 1707 } else { 1708 jcc(Assembler::notZero, done); 1709 } 1710 break; 1711 } 1712 // Since null is rare, make it be the branch-taken case. 1713 jcc(Assembler::zero, found_null); 1714 1715 // Put all the "Case 3" tests here. 1716 record_item_in_profile_helper(item, mdp, reg2, start_row + 1, done, total_rows, 1717 item_offset_fn, item_count_offset_fn, non_profiled_offset); 1718 1719 // Found a null. Keep searching for a matching item, 1720 // but remember that this is an empty (unused) slot. 1721 bind(found_null); 1722 } 1723 } 1724 1725 // In the fall-through case, we found no matching item, but we 1726 // observed the item[start_row] is NULL. 1727 1728 // Fill in the item field and increment the count. 1729 int item_offset = in_bytes(item_offset_fn(start_row)); 1730 set_mdp_data_at(mdp, item_offset, item); 1731 int count_offset = in_bytes(item_count_offset_fn(start_row)); 1732 movl(reg2, DataLayout::counter_increment); 1733 set_mdp_data_at(mdp, count_offset, reg2); 1734 if (start_row > 0) { 1735 jmp(done); 1736 } 1737 } 1738 1739 // Example state machine code for three profile rows: 1740 // // main copy of decision tree, rooted at row[1] 1741 // if (row[0].rec == rec) { row[0].incr(); goto done; } 1742 // if (row[0].rec != NULL) { 1743 // // inner copy of decision tree, rooted at row[1] 1744 // if (row[1].rec == rec) { row[1].incr(); goto done; } 1745 // if (row[1].rec != NULL) { 1746 // // degenerate decision tree, rooted at row[2] 1747 // if (row[2].rec == rec) { row[2].incr(); goto done; } 1748 // if (row[2].rec != NULL) { count.incr(); goto done; } // overflow 1749 // row[2].init(rec); goto done; 1750 // } else { 1751 // // remember row[1] is empty 1752 // if (row[2].rec == rec) { row[2].incr(); goto done; } 1753 // row[1].init(rec); goto done; 1754 // } 1755 // } else { 1756 // // remember row[0] is empty 1757 // if (row[1].rec == rec) { row[1].incr(); goto done; } 1758 // if (row[2].rec == rec) { row[2].incr(); goto done; } 1759 // row[0].init(rec); goto done; 1760 // } 1761 // done: 1762 1763 void InterpreterMacroAssembler::record_klass_in_profile(Register receiver, 1764 Register mdp, Register reg2, 1765 bool is_virtual_call) { 1766 assert(ProfileInterpreter, "must be profiling"); 1767 Label done; 1768 1769 record_klass_in_profile_helper(receiver, mdp, reg2, 0, done, is_virtual_call); 1770 1771 bind (done); 1772 } 1773 1774 void InterpreterMacroAssembler::profile_ret(Register return_bci, 1775 Register mdp) { 1776 if (ProfileInterpreter) { 1777 Label profile_continue; 1778 uint row; 1779 1780 // If no method data exists, go to profile_continue. 1781 test_method_data_pointer(mdp, profile_continue); 1782 1783 // Update the total ret count. 1784 increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset())); 1785 1786 for (row = 0; row < RetData::row_limit(); row++) { 1787 Label next_test; 1788 1789 // See if return_bci is equal to bci[n]: 1790 test_mdp_data_at(mdp, 1791 in_bytes(RetData::bci_offset(row)), 1792 return_bci, noreg, 1793 next_test); 1794 1795 // return_bci is equal to bci[n]. Increment the count. 1796 increment_mdp_data_at(mdp, in_bytes(RetData::bci_count_offset(row))); 1797 1798 // The method data pointer needs to be updated to reflect the new target. 1799 update_mdp_by_offset(mdp, 1800 in_bytes(RetData::bci_displacement_offset(row))); 1801 jmp(profile_continue); 1802 bind(next_test); 1803 } 1804 1805 update_mdp_for_ret(return_bci); 1806 1807 bind(profile_continue); 1808 } 1809 } 1810 1811 1812 void InterpreterMacroAssembler::profile_null_seen(Register mdp) { 1813 if (ProfileInterpreter) { 1814 Label profile_continue; 1815 1816 // If no method data exists, go to profile_continue. 1817 test_method_data_pointer(mdp, profile_continue); 1818 1819 set_mdp_flag_at(mdp, BitData::null_seen_byte_constant()); 1820 1821 // The method data pointer needs to be updated. 1822 int mdp_delta = in_bytes(BitData::bit_data_size()); 1823 if (TypeProfileCasts) { 1824 mdp_delta = in_bytes(VirtualCallData::virtual_call_data_size()); 1825 } 1826 update_mdp_by_constant(mdp, mdp_delta); 1827 1828 bind(profile_continue); 1829 } 1830 } 1831 1832 1833 void InterpreterMacroAssembler::profile_typecheck_failed(Register mdp) { 1834 if (ProfileInterpreter && TypeProfileCasts) { 1835 Label profile_continue; 1836 1837 // If no method data exists, go to profile_continue. 1838 test_method_data_pointer(mdp, profile_continue); 1839 1840 int count_offset = in_bytes(CounterData::count_offset()); 1841 // Back up the address, since we have already bumped the mdp. 1842 count_offset -= in_bytes(VirtualCallData::virtual_call_data_size()); 1843 1844 // *Decrement* the counter. We expect to see zero or small negatives. 1845 increment_mdp_data_at(mdp, count_offset, true); 1846 1847 bind (profile_continue); 1848 } 1849 } 1850 1851 1852 void InterpreterMacroAssembler::profile_typecheck(Register mdp, Register klass, Register reg2) { 1853 if (ProfileInterpreter) { 1854 Label profile_continue; 1855 1856 // If no method data exists, go to profile_continue. 1857 test_method_data_pointer(mdp, profile_continue); 1858 1859 // The method data pointer needs to be updated. 1860 int mdp_delta = in_bytes(BitData::bit_data_size()); 1861 if (TypeProfileCasts) { 1862 mdp_delta = in_bytes(VirtualCallData::virtual_call_data_size()); 1863 1864 // Record the object type. 1865 record_klass_in_profile(klass, mdp, reg2, false); 1866 NOT_LP64(assert(reg2 == rdi, "we know how to fix this blown reg");) 1867 NOT_LP64(restore_locals();) // Restore EDI 1868 } 1869 update_mdp_by_constant(mdp, mdp_delta); 1870 1871 bind(profile_continue); 1872 } 1873 } 1874 1875 1876 void InterpreterMacroAssembler::profile_switch_default(Register mdp) { 1877 if (ProfileInterpreter) { 1878 Label profile_continue; 1879 1880 // If no method data exists, go to profile_continue. 1881 test_method_data_pointer(mdp, profile_continue); 1882 1883 // Update the default case count 1884 increment_mdp_data_at(mdp, 1885 in_bytes(MultiBranchData::default_count_offset())); 1886 1887 // The method data pointer needs to be updated. 1888 update_mdp_by_offset(mdp, 1889 in_bytes(MultiBranchData:: 1890 default_displacement_offset())); 1891 1892 bind(profile_continue); 1893 } 1894 } 1895 1896 1897 void InterpreterMacroAssembler::profile_switch_case(Register index, 1898 Register mdp, 1899 Register reg2) { 1900 if (ProfileInterpreter) { 1901 Label profile_continue; 1902 1903 // If no method data exists, go to profile_continue. 1904 test_method_data_pointer(mdp, profile_continue); 1905 1906 // Build the base (index * per_case_size_in_bytes()) + 1907 // case_array_offset_in_bytes() 1908 movl(reg2, in_bytes(MultiBranchData::per_case_size())); 1909 imulptr(index, reg2); // XXX l ? 1910 addptr(index, in_bytes(MultiBranchData::case_array_offset())); // XXX l ? 1911 1912 // Update the case count 1913 increment_mdp_data_at(mdp, 1914 index, 1915 in_bytes(MultiBranchData::relative_count_offset())); 1916 1917 // The method data pointer needs to be updated. 1918 update_mdp_by_offset(mdp, 1919 index, 1920 in_bytes(MultiBranchData:: 1921 relative_displacement_offset())); 1922 1923 bind(profile_continue); 1924 } 1925 } 1926 1927 1928 1929 void InterpreterMacroAssembler::verify_oop(Register reg, TosState state) { 1930 if (state == atos) { 1931 MacroAssembler::verify_oop(reg); 1932 } 1933 } 1934 1935 void InterpreterMacroAssembler::verify_FPU(int stack_depth, TosState state) { 1936 #ifndef _LP64 1937 if ((state == ftos && UseSSE < 1) || 1938 (state == dtos && UseSSE < 2)) { 1939 MacroAssembler::verify_FPU(stack_depth); 1940 } 1941 #endif 1942 } 1943 1944 // Jump if ((*counter_addr += increment) & mask) satisfies the condition. 1945 void InterpreterMacroAssembler::increment_mask_and_jump(Address counter_addr, 1946 int increment, Address mask, 1947 Register scratch, bool preloaded, 1948 Condition cond, Label* where) { 1949 if (!preloaded) { 1950 movl(scratch, counter_addr); 1951 } 1952 incrementl(scratch, increment); 1953 movl(counter_addr, scratch); 1954 andl(scratch, mask); 1955 jcc(cond, *where); 1956 } 1957 1958 void InterpreterMacroAssembler::notify_method_entry() { 1959 // Whenever JVMTI is interp_only_mode, method entry/exit events are sent to 1960 // track stack depth. If it is possible to enter interp_only_mode we add 1961 // the code to check if the event should be sent. 1962 Register rthread = LP64_ONLY(r15_thread) NOT_LP64(rcx); 1963 Register rarg = LP64_ONLY(c_rarg1) NOT_LP64(rbx); 1964 if (JvmtiExport::can_post_interpreter_events()) { 1965 Label L; 1966 NOT_LP64(get_thread(rthread);) 1967 movl(rdx, Address(rthread, JavaThread::interp_only_mode_offset())); 1968 testl(rdx, rdx); 1969 jcc(Assembler::zero, L); 1970 call_VM(noreg, CAST_FROM_FN_PTR(address, 1971 InterpreterRuntime::post_method_entry)); 1972 bind(L); 1973 } 1974 1975 { 1976 SkipIfEqual skip(this, &DTraceMethodProbes, false); 1977 NOT_LP64(get_thread(rthread);) 1978 get_method(rarg); 1979 call_VM_leaf(CAST_FROM_FN_PTR(address, SharedRuntime::dtrace_method_entry), 1980 rthread, rarg); 1981 } 1982 1983 // RedefineClasses() tracing support for obsolete method entry 1984 if (log_is_enabled(Trace, redefine, class, obsolete)) { 1985 NOT_LP64(get_thread(rthread);) 1986 get_method(rarg); 1987 call_VM_leaf( 1988 CAST_FROM_FN_PTR(address, SharedRuntime::rc_trace_method_entry), 1989 rthread, rarg); 1990 } 1991 } 1992 1993 1994 void InterpreterMacroAssembler::notify_method_exit( 1995 TosState state, NotifyMethodExitMode mode) { 1996 // Whenever JVMTI is interp_only_mode, method entry/exit events are sent to 1997 // track stack depth. If it is possible to enter interp_only_mode we add 1998 // the code to check if the event should be sent. 1999 Register rthread = LP64_ONLY(r15_thread) NOT_LP64(rcx); 2000 Register rarg = LP64_ONLY(c_rarg1) NOT_LP64(rbx); 2001 if (mode == NotifyJVMTI && JvmtiExport::can_post_interpreter_events()) { 2002 Label L; 2003 // Note: frame::interpreter_frame_result has a dependency on how the 2004 // method result is saved across the call to post_method_exit. If this 2005 // is changed then the interpreter_frame_result implementation will 2006 // need to be updated too. 2007 2008 // template interpreter will leave the result on the top of the stack. 2009 push(state); 2010 NOT_LP64(get_thread(rthread);) 2011 movl(rdx, Address(rthread, JavaThread::interp_only_mode_offset())); 2012 testl(rdx, rdx); 2013 jcc(Assembler::zero, L); 2014 call_VM(noreg, 2015 CAST_FROM_FN_PTR(address, InterpreterRuntime::post_method_exit)); 2016 bind(L); 2017 pop(state); 2018 } 2019 2020 { 2021 SkipIfEqual skip(this, &DTraceMethodProbes, false); 2022 push(state); 2023 NOT_LP64(get_thread(rthread);) 2024 get_method(rarg); 2025 call_VM_leaf(CAST_FROM_FN_PTR(address, SharedRuntime::dtrace_method_exit), 2026 rthread, rarg); 2027 pop(state); 2028 } 2029 }