1 /* 2 * Copyright (c) 2007, 2012, Oracle and/or its affiliates. All rights reserved. 3 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. 4 * 5 * This code is free software; you can redistribute it and/or modify it 6 * under the terms of the GNU General Public License version 2 only, as 7 * published by the Free Software Foundation. 8 * 9 * This code is distributed in the hope that it will be useful, but WITHOUT 10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License 12 * version 2 for more details (a copy is included in the LICENSE file that 13 * accompanied this code). 14 * 15 * You should have received a copy of the GNU General Public License version 16 * 2 along with this work; if not, write to the Free Software Foundation, 17 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. 18 * 19 * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA 20 * or visit www.oracle.com if you need additional information or have any 21 * questions. 22 * 23 */ 24 25 #include "precompiled.hpp" 26 #include "asm/assembler.hpp" 27 #include "interpreter/bytecodeHistogram.hpp" 28 #include "interpreter/cppInterpreter.hpp" 29 #include "interpreter/interpreter.hpp" 30 #include "interpreter/interpreterGenerator.hpp" 31 #include "interpreter/interpreterRuntime.hpp" 32 #include "oops/arrayOop.hpp" 33 #include "oops/methodData.hpp" 34 #include "oops/method.hpp" 35 #include "oops/oop.inline.hpp" 36 #include "prims/jvmtiExport.hpp" 37 #include "prims/jvmtiThreadState.hpp" 38 #include "runtime/arguments.hpp" 39 #include "runtime/deoptimization.hpp" 40 #include "runtime/frame.inline.hpp" 41 #include "runtime/interfaceSupport.hpp" 42 #include "runtime/sharedRuntime.hpp" 43 #include "runtime/stubRoutines.hpp" 44 #include "runtime/synchronizer.hpp" 45 #include "runtime/timer.hpp" 46 #include "runtime/vframeArray.hpp" 47 #include "utilities/debug.hpp" 48 #include "utilities/macros.hpp" 49 #ifdef SHARK 50 #include "shark/shark_globals.hpp" 51 #endif 52 53 #ifdef CC_INTERP 54 55 // Routine exists to make tracebacks look decent in debugger 56 // while "shadow" interpreter frames are on stack. It is also 57 // used to distinguish interpreter frames. 58 59 extern "C" void RecursiveInterpreterActivation(interpreterState istate) { 60 ShouldNotReachHere(); 61 } 62 63 bool CppInterpreter::contains(address pc) { 64 return ( _code->contains(pc) || 65 ( pc == (CAST_FROM_FN_PTR(address, RecursiveInterpreterActivation) + frame::pc_return_offset))); 66 } 67 68 #define STATE(field_name) Lstate, in_bytes(byte_offset_of(BytecodeInterpreter, field_name)) 69 #define __ _masm-> 70 71 Label frame_manager_entry; 72 Label fast_accessor_slow_entry_path; // fast accessor methods need to be able to jmp to unsynchronized 73 // c++ interpreter entry point this holds that entry point label. 74 75 static address unctrap_frame_manager_entry = NULL; 76 77 static address interpreter_return_address = NULL; 78 static address deopt_frame_manager_return_atos = NULL; 79 static address deopt_frame_manager_return_btos = NULL; 80 static address deopt_frame_manager_return_itos = NULL; 81 static address deopt_frame_manager_return_ltos = NULL; 82 static address deopt_frame_manager_return_ftos = NULL; 83 static address deopt_frame_manager_return_dtos = NULL; 84 static address deopt_frame_manager_return_vtos = NULL; 85 86 const Register prevState = G1_scratch; 87 88 void InterpreterGenerator::save_native_result(void) { 89 // result potentially in O0/O1: save it across calls 90 __ stf(FloatRegisterImpl::D, F0, STATE(_native_fresult)); 91 #ifdef _LP64 92 __ stx(O0, STATE(_native_lresult)); 93 #else 94 __ std(O0, STATE(_native_lresult)); 95 #endif 96 } 97 98 void InterpreterGenerator::restore_native_result(void) { 99 100 // Restore any method result value 101 __ ldf(FloatRegisterImpl::D, STATE(_native_fresult), F0); 102 #ifdef _LP64 103 __ ldx(STATE(_native_lresult), O0); 104 #else 105 __ ldd(STATE(_native_lresult), O0); 106 #endif 107 } 108 109 // A result handler converts/unboxes a native call result into 110 // a java interpreter/compiler result. The current frame is an 111 // interpreter frame. The activation frame unwind code must be 112 // consistent with that of TemplateTable::_return(...). In the 113 // case of native methods, the caller's SP was not modified. 114 address CppInterpreterGenerator::generate_result_handler_for(BasicType type) { 115 address entry = __ pc(); 116 Register Itos_i = Otos_i ->after_save(); 117 Register Itos_l = Otos_l ->after_save(); 118 Register Itos_l1 = Otos_l1->after_save(); 119 Register Itos_l2 = Otos_l2->after_save(); 120 switch (type) { 121 case T_BOOLEAN: __ subcc(G0, O0, G0); __ addc(G0, 0, Itos_i); break; // !0 => true; 0 => false 122 case T_CHAR : __ sll(O0, 16, O0); __ srl(O0, 16, Itos_i); break; // cannot use and3, 0xFFFF too big as immediate value! 123 case T_BYTE : __ sll(O0, 24, O0); __ sra(O0, 24, Itos_i); break; 124 case T_SHORT : __ sll(O0, 16, O0); __ sra(O0, 16, Itos_i); break; 125 case T_LONG : 126 #ifndef _LP64 127 __ mov(O1, Itos_l2); // move other half of long 128 #endif // ifdef or no ifdef, fall through to the T_INT case 129 case T_INT : __ mov(O0, Itos_i); break; 130 case T_VOID : /* nothing to do */ break; 131 case T_FLOAT : assert(F0 == Ftos_f, "fix this code" ); break; 132 case T_DOUBLE : assert(F0 == Ftos_d, "fix this code" ); break; 133 case T_OBJECT : 134 __ ld_ptr(STATE(_oop_temp), Itos_i); 135 __ verify_oop(Itos_i); 136 break; 137 default : ShouldNotReachHere(); 138 } 139 __ ret(); // return from interpreter activation 140 __ delayed()->restore(I5_savedSP, G0, SP); // remove interpreter frame 141 NOT_PRODUCT(__ emit_int32(0);) // marker for disassembly 142 return entry; 143 } 144 145 // tosca based result to c++ interpreter stack based result. 146 // Result goes to address in L1_scratch 147 148 address CppInterpreterGenerator::generate_tosca_to_stack_converter(BasicType type) { 149 // A result is in the native abi result register from a native method call. 150 // We need to return this result to the interpreter by pushing the result on the interpreter's 151 // stack. This is relatively simple the destination is in L1_scratch 152 // i.e. L1_scratch is the first free element on the stack. If we "push" a return value we must 153 // adjust L1_scratch 154 address entry = __ pc(); 155 switch (type) { 156 case T_BOOLEAN: 157 // !0 => true; 0 => false 158 __ subcc(G0, O0, G0); 159 __ addc(G0, 0, O0); 160 __ st(O0, L1_scratch, 0); 161 __ sub(L1_scratch, wordSize, L1_scratch); 162 break; 163 164 // cannot use and3, 0xFFFF too big as immediate value! 165 case T_CHAR : 166 __ sll(O0, 16, O0); 167 __ srl(O0, 16, O0); 168 __ st(O0, L1_scratch, 0); 169 __ sub(L1_scratch, wordSize, L1_scratch); 170 break; 171 172 case T_BYTE : 173 __ sll(O0, 24, O0); 174 __ sra(O0, 24, O0); 175 __ st(O0, L1_scratch, 0); 176 __ sub(L1_scratch, wordSize, L1_scratch); 177 break; 178 179 case T_SHORT : 180 __ sll(O0, 16, O0); 181 __ sra(O0, 16, O0); 182 __ st(O0, L1_scratch, 0); 183 __ sub(L1_scratch, wordSize, L1_scratch); 184 break; 185 case T_LONG : 186 #ifndef _LP64 187 #if defined(COMPILER2) 188 // All return values are where we want them, except for Longs. C2 returns 189 // longs in G1 in the 32-bit build whereas the interpreter wants them in O0/O1. 190 // Since the interpreter will return longs in G1 and O0/O1 in the 32bit 191 // build even if we are returning from interpreted we just do a little 192 // stupid shuffing. 193 // Note: I tried to make c2 return longs in O0/O1 and G1 so we wouldn't have to 194 // do this here. Unfortunately if we did a rethrow we'd see an machepilog node 195 // first which would move g1 -> O0/O1 and destroy the exception we were throwing. 196 __ stx(G1, L1_scratch, -wordSize); 197 #else 198 // native result is in O0, O1 199 __ st(O1, L1_scratch, 0); // Low order 200 __ st(O0, L1_scratch, -wordSize); // High order 201 #endif /* COMPILER2 */ 202 #else 203 __ stx(O0, L1_scratch, -wordSize); 204 #endif 205 __ sub(L1_scratch, 2*wordSize, L1_scratch); 206 break; 207 208 case T_INT : 209 __ st(O0, L1_scratch, 0); 210 __ sub(L1_scratch, wordSize, L1_scratch); 211 break; 212 213 case T_VOID : /* nothing to do */ 214 break; 215 216 case T_FLOAT : 217 __ stf(FloatRegisterImpl::S, F0, L1_scratch, 0); 218 __ sub(L1_scratch, wordSize, L1_scratch); 219 break; 220 221 case T_DOUBLE : 222 // Every stack slot is aligned on 64 bit, However is this 223 // the correct stack slot on 64bit?? QQQ 224 __ stf(FloatRegisterImpl::D, F0, L1_scratch, -wordSize); 225 __ sub(L1_scratch, 2*wordSize, L1_scratch); 226 break; 227 case T_OBJECT : 228 __ verify_oop(O0); 229 __ st_ptr(O0, L1_scratch, 0); 230 __ sub(L1_scratch, wordSize, L1_scratch); 231 break; 232 default : ShouldNotReachHere(); 233 } 234 __ retl(); // return from interpreter activation 235 __ delayed()->nop(); // schedule this better 236 NOT_PRODUCT(__ emit_int32(0);) // marker for disassembly 237 return entry; 238 } 239 240 address CppInterpreterGenerator::generate_stack_to_stack_converter(BasicType type) { 241 // A result is in the java expression stack of the interpreted method that has just 242 // returned. Place this result on the java expression stack of the caller. 243 // 244 // The current interpreter activation in Lstate is for the method just returning its 245 // result. So we know that the result of this method is on the top of the current 246 // execution stack (which is pre-pushed) and will be return to the top of the caller 247 // stack. The top of the callers stack is the bottom of the locals of the current 248 // activation. 249 // Because of the way activation are managed by the frame manager the value of esp is 250 // below both the stack top of the current activation and naturally the stack top 251 // of the calling activation. This enable this routine to leave the return address 252 // to the frame manager on the stack and do a vanilla return. 253 // 254 // On entry: O0 - points to source (callee stack top) 255 // O1 - points to destination (caller stack top [i.e. free location]) 256 // destroys O2, O3 257 // 258 259 address entry = __ pc(); 260 switch (type) { 261 case T_VOID: break; 262 break; 263 case T_FLOAT : 264 case T_BOOLEAN: 265 case T_CHAR : 266 case T_BYTE : 267 case T_SHORT : 268 case T_INT : 269 // 1 word result 270 __ ld(O0, 0, O2); 271 __ st(O2, O1, 0); 272 __ sub(O1, wordSize, O1); 273 break; 274 case T_DOUBLE : 275 case T_LONG : 276 // return top two words on current expression stack to caller's expression stack 277 // The caller's expression stack is adjacent to the current frame manager's intepretState 278 // except we allocated one extra word for this intepretState so we won't overwrite it 279 // when we return a two word result. 280 #ifdef _LP64 281 __ ld_ptr(O0, 0, O2); 282 __ st_ptr(O2, O1, -wordSize); 283 #else 284 __ ld(O0, 0, O2); 285 __ ld(O0, wordSize, O3); 286 __ st(O3, O1, 0); 287 __ st(O2, O1, -wordSize); 288 #endif 289 __ sub(O1, 2*wordSize, O1); 290 break; 291 case T_OBJECT : 292 __ ld_ptr(O0, 0, O2); 293 __ verify_oop(O2); // verify it 294 __ st_ptr(O2, O1, 0); 295 __ sub(O1, wordSize, O1); 296 break; 297 default : ShouldNotReachHere(); 298 } 299 __ retl(); 300 __ delayed()->nop(); // QQ schedule this better 301 return entry; 302 } 303 304 address CppInterpreterGenerator::generate_stack_to_native_abi_converter(BasicType type) { 305 // A result is in the java expression stack of the interpreted method that has just 306 // returned. Place this result in the native abi that the caller expects. 307 // We are in a new frame registers we set must be in caller (i.e. callstub) frame. 308 // 309 // Similar to generate_stack_to_stack_converter above. Called at a similar time from the 310 // frame manager execept in this situation the caller is native code (c1/c2/call_stub) 311 // and so rather than return result onto caller's java expression stack we return the 312 // result in the expected location based on the native abi. 313 // On entry: O0 - source (stack top) 314 // On exit result in expected output register 315 // QQQ schedule this better 316 317 address entry = __ pc(); 318 switch (type) { 319 case T_VOID: break; 320 break; 321 case T_FLOAT : 322 __ ldf(FloatRegisterImpl::S, O0, 0, F0); 323 break; 324 case T_BOOLEAN: 325 case T_CHAR : 326 case T_BYTE : 327 case T_SHORT : 328 case T_INT : 329 // 1 word result 330 __ ld(O0, 0, O0->after_save()); 331 break; 332 case T_DOUBLE : 333 __ ldf(FloatRegisterImpl::D, O0, 0, F0); 334 break; 335 case T_LONG : 336 // return top two words on current expression stack to caller's expression stack 337 // The caller's expression stack is adjacent to the current frame manager's interpretState 338 // except we allocated one extra word for this intepretState so we won't overwrite it 339 // when we return a two word result. 340 #ifdef _LP64 341 __ ld_ptr(O0, 0, O0->after_save()); 342 #else 343 __ ld(O0, wordSize, O1->after_save()); 344 __ ld(O0, 0, O0->after_save()); 345 #endif 346 #if defined(COMPILER2) && !defined(_LP64) 347 // C2 expects long results in G1 we can't tell if we're returning to interpreted 348 // or compiled so just be safe use G1 and O0/O1 349 350 // Shift bits into high (msb) of G1 351 __ sllx(Otos_l1->after_save(), 32, G1); 352 // Zero extend low bits 353 __ srl (Otos_l2->after_save(), 0, Otos_l2->after_save()); 354 __ or3 (Otos_l2->after_save(), G1, G1); 355 #endif /* COMPILER2 */ 356 break; 357 case T_OBJECT : 358 __ ld_ptr(O0, 0, O0->after_save()); 359 __ verify_oop(O0->after_save()); // verify it 360 break; 361 default : ShouldNotReachHere(); 362 } 363 __ retl(); 364 __ delayed()->nop(); 365 return entry; 366 } 367 368 address CppInterpreter::return_entry(TosState state, int length) { 369 // make it look good in the debugger 370 return CAST_FROM_FN_PTR(address, RecursiveInterpreterActivation) + frame::pc_return_offset; 371 } 372 373 address CppInterpreter::deopt_entry(TosState state, int length) { 374 address ret = NULL; 375 if (length != 0) { 376 switch (state) { 377 case atos: ret = deopt_frame_manager_return_atos; break; 378 case btos: ret = deopt_frame_manager_return_btos; break; 379 case ctos: 380 case stos: 381 case itos: ret = deopt_frame_manager_return_itos; break; 382 case ltos: ret = deopt_frame_manager_return_ltos; break; 383 case ftos: ret = deopt_frame_manager_return_ftos; break; 384 case dtos: ret = deopt_frame_manager_return_dtos; break; 385 case vtos: ret = deopt_frame_manager_return_vtos; break; 386 } 387 } else { 388 ret = unctrap_frame_manager_entry; // re-execute the bytecode ( e.g. uncommon trap) 389 } 390 assert(ret != NULL, "Not initialized"); 391 return ret; 392 } 393 394 // 395 // Helpers for commoning out cases in the various type of method entries. 396 // 397 398 // increment invocation count & check for overflow 399 // 400 // Note: checking for negative value instead of overflow 401 // so we have a 'sticky' overflow test 402 // 403 // Lmethod: method 404 // ??: invocation counter 405 // 406 void InterpreterGenerator::generate_counter_incr(Label* overflow, Label* profile_method, Label* profile_method_continue) { 407 // Update standard invocation counters 408 __ increment_invocation_counter(O0, G3_scratch); 409 if (ProfileInterpreter) { // %%% Merge this into MethodData* 410 __ ld_ptr(STATE(_method), G3_scratch); 411 Address interpreter_invocation_counter(G3_scratch, 0, in_bytes(Method::interpreter_invocation_counter_offset())); 412 __ ld(interpreter_invocation_counter, G3_scratch); 413 __ inc(G3_scratch); 414 __ st(G3_scratch, interpreter_invocation_counter); 415 } 416 417 Address invocation_limit(G3_scratch, (address)&InvocationCounter::InterpreterInvocationLimit); 418 __ sethi(invocation_limit); 419 __ ld(invocation_limit, G3_scratch); 420 __ cmp(O0, G3_scratch); 421 __ br(Assembler::greaterEqualUnsigned, false, Assembler::pn, *overflow); 422 __ delayed()->nop(); 423 424 } 425 426 address InterpreterGenerator::generate_empty_entry(void) { 427 428 // A method that does nothing but return... 429 430 address entry = __ pc(); 431 Label slow_path; 432 433 // do nothing for empty methods (do not even increment invocation counter) 434 if ( UseFastEmptyMethods) { 435 // If we need a safepoint check, generate full interpreter entry. 436 Address sync_state(G3_scratch, SafepointSynchronize::address_of_state()); 437 __ load_contents(sync_state, G3_scratch); 438 __ cmp(G3_scratch, SafepointSynchronize::_not_synchronized); 439 __ br(Assembler::notEqual, false, Assembler::pn, frame_manager_entry); 440 __ delayed()->nop(); 441 442 // Code: _return 443 __ retl(); 444 __ delayed()->mov(O5_savedSP, SP); 445 return entry; 446 } 447 return NULL; 448 } 449 450 // Call an accessor method (assuming it is resolved, otherwise drop into 451 // vanilla (slow path) entry 452 453 // Generates code to elide accessor methods 454 // Uses G3_scratch and G1_scratch as scratch 455 address InterpreterGenerator::generate_accessor_entry(void) { 456 457 // Code: _aload_0, _(i|a)getfield, _(i|a)return or any rewrites thereof; 458 // parameter size = 1 459 // Note: We can only use this code if the getfield has been resolved 460 // and if we don't have a null-pointer exception => check for 461 // these conditions first and use slow path if necessary. 462 address entry = __ pc(); 463 Label slow_path; 464 465 if ( UseFastAccessorMethods) { 466 // Check if we need to reach a safepoint and generate full interpreter 467 // frame if so. 468 Address sync_state(G3_scratch, SafepointSynchronize::address_of_state()); 469 __ load_contents(sync_state, G3_scratch); 470 __ cmp(G3_scratch, SafepointSynchronize::_not_synchronized); 471 __ br(Assembler::notEqual, false, Assembler::pn, slow_path); 472 __ delayed()->nop(); 473 474 // Check if local 0 != NULL 475 __ ld_ptr(Gargs, G0, Otos_i ); // get local 0 476 __ tst(Otos_i); // check if local 0 == NULL and go the slow path 477 __ brx(Assembler::zero, false, Assembler::pn, slow_path); 478 __ delayed()->nop(); 479 480 481 // read first instruction word and extract bytecode @ 1 and index @ 2 482 // get first 4 bytes of the bytecodes (big endian!) 483 __ ld_ptr(Address(G5_method, 0, in_bytes(Method::const_offset())), G1_scratch); 484 __ ld(Address(G1_scratch, 0, in_bytes(ConstMethod::codes_offset())), G1_scratch); 485 486 // move index @ 2 far left then to the right most two bytes. 487 __ sll(G1_scratch, 2*BitsPerByte, G1_scratch); 488 __ srl(G1_scratch, 2*BitsPerByte - exact_log2(in_words( 489 ConstantPoolCacheEntry::size()) * BytesPerWord), G1_scratch); 490 491 // get constant pool cache 492 __ ld_ptr(G5_method, in_bytes(Method::const_offset()), G3_scratch); 493 __ ld_ptr(G3_scratch, in_bytes(ConstMethod::constants_offset()), G3_scratch); 494 __ ld_ptr(G3_scratch, ConstantPool::cache_offset_in_bytes(), G3_scratch); 495 496 // get specific constant pool cache entry 497 __ add(G3_scratch, G1_scratch, G3_scratch); 498 499 // Check the constant Pool cache entry to see if it has been resolved. 500 // If not, need the slow path. 501 ByteSize cp_base_offset = ConstantPoolCache::base_offset(); 502 __ ld_ptr(G3_scratch, in_bytes(cp_base_offset + ConstantPoolCacheEntry::indices_offset()), G1_scratch); 503 __ srl(G1_scratch, 2*BitsPerByte, G1_scratch); 504 __ and3(G1_scratch, 0xFF, G1_scratch); 505 __ cmp(G1_scratch, Bytecodes::_getfield); 506 __ br(Assembler::notEqual, false, Assembler::pn, slow_path); 507 __ delayed()->nop(); 508 509 // Get the type and return field offset from the constant pool cache 510 __ ld_ptr(G3_scratch, in_bytes(cp_base_offset + ConstantPoolCacheEntry::flags_offset()), G1_scratch); 511 __ ld_ptr(G3_scratch, in_bytes(cp_base_offset + ConstantPoolCacheEntry::f2_offset()), G3_scratch); 512 513 Label xreturn_path; 514 // Need to differentiate between igetfield, agetfield, bgetfield etc. 515 // because they are different sizes. 516 // Get the type from the constant pool cache 517 __ srl(G1_scratch, ConstantPoolCacheEntry::tos_state_shift, G1_scratch); 518 // Make sure we don't need to mask G1_scratch after the above shift 519 ConstantPoolCacheEntry::verify_tos_state_shift(); 520 __ cmp(G1_scratch, atos ); 521 __ br(Assembler::equal, true, Assembler::pt, xreturn_path); 522 __ delayed()->ld_ptr(Otos_i, G3_scratch, Otos_i); 523 __ cmp(G1_scratch, itos); 524 __ br(Assembler::equal, true, Assembler::pt, xreturn_path); 525 __ delayed()->ld(Otos_i, G3_scratch, Otos_i); 526 __ cmp(G1_scratch, stos); 527 __ br(Assembler::equal, true, Assembler::pt, xreturn_path); 528 __ delayed()->ldsh(Otos_i, G3_scratch, Otos_i); 529 __ cmp(G1_scratch, ctos); 530 __ br(Assembler::equal, true, Assembler::pt, xreturn_path); 531 __ delayed()->lduh(Otos_i, G3_scratch, Otos_i); 532 #ifdef ASSERT 533 __ cmp(G1_scratch, btos); 534 __ br(Assembler::equal, true, Assembler::pt, xreturn_path); 535 __ delayed()->ldsb(Otos_i, G3_scratch, Otos_i); 536 __ should_not_reach_here(); 537 #endif 538 __ ldsb(Otos_i, G3_scratch, Otos_i); 539 __ bind(xreturn_path); 540 541 // _ireturn/_areturn 542 __ retl(); // return from leaf routine 543 __ delayed()->mov(O5_savedSP, SP); 544 545 // Generate regular method entry 546 __ bind(slow_path); 547 __ ba(fast_accessor_slow_entry_path); 548 __ delayed()->nop(); 549 return entry; 550 } 551 return NULL; 552 } 553 554 address InterpreterGenerator::generate_Reference_get_entry(void) { 555 #if INCLUDE_ALL_GCS 556 if (UseG1GC) { 557 // We need to generate have a routine that generates code to: 558 // * load the value in the referent field 559 // * passes that value to the pre-barrier. 560 // 561 // In the case of G1 this will record the value of the 562 // referent in an SATB buffer if marking is active. 563 // This will cause concurrent marking to mark the referent 564 // field as live. 565 Unimplemented(); 566 } 567 #endif // INCLUDE_ALL_GCS 568 569 // If G1 is not enabled then attempt to go through the accessor entry point 570 // Reference.get is an accessor 571 return generate_accessor_entry(); 572 } 573 574 // 575 // Interpreter stub for calling a native method. (C++ interpreter) 576 // This sets up a somewhat different looking stack for calling the native method 577 // than the typical interpreter frame setup. 578 // 579 580 address InterpreterGenerator::generate_native_entry(bool synchronized) { 581 address entry = __ pc(); 582 583 // the following temporary registers are used during frame creation 584 const Register Gtmp1 = G3_scratch ; 585 const Register Gtmp2 = G1_scratch; 586 const Register RconstMethod = Gtmp1; 587 const Address constMethod(G5_method, 0, in_bytes(Method::const_offset())); 588 const Address size_of_parameters(RconstMethod, 0, in_bytes(ConstMethod::size_of_parameters_offset())); 589 590 bool inc_counter = UseCompiler || CountCompiledCalls; 591 592 // make sure registers are different! 593 assert_different_registers(G2_thread, G5_method, Gargs, Gtmp1, Gtmp2); 594 595 const Address access_flags (G5_method, 0, in_bytes(Method::access_flags_offset())); 596 597 Label Lentry; 598 __ bind(Lentry); 599 600 const Register Glocals_size = G3; 601 assert_different_registers(Glocals_size, G4_scratch, Gframe_size); 602 603 // make sure method is native & not abstract 604 // rethink these assertions - they can be simplified and shared (gri 2/25/2000) 605 #ifdef ASSERT 606 __ ld(access_flags, Gtmp1); 607 { 608 Label L; 609 __ btst(JVM_ACC_NATIVE, Gtmp1); 610 __ br(Assembler::notZero, false, Assembler::pt, L); 611 __ delayed()->nop(); 612 __ stop("tried to execute non-native method as native"); 613 __ bind(L); 614 } 615 { Label L; 616 __ btst(JVM_ACC_ABSTRACT, Gtmp1); 617 __ br(Assembler::zero, false, Assembler::pt, L); 618 __ delayed()->nop(); 619 __ stop("tried to execute abstract method as non-abstract"); 620 __ bind(L); 621 } 622 #endif // ASSERT 623 624 __ ld_ptr(constMethod, RconstMethod); 625 __ lduh(size_of_parameters, Gtmp1); 626 __ sll(Gtmp1, LogBytesPerWord, Gtmp2); // parameter size in bytes 627 __ add(Gargs, Gtmp2, Gargs); // points to first local + BytesPerWord 628 // NEW 629 __ add(Gargs, -wordSize, Gargs); // points to first local[0] 630 // generate the code to allocate the interpreter stack frame 631 // NEW FRAME ALLOCATED HERE 632 // save callers original sp 633 // __ mov(SP, I5_savedSP->after_restore()); 634 635 generate_compute_interpreter_state(Lstate, G0, true); 636 637 // At this point Lstate points to new interpreter state 638 // 639 640 const Address do_not_unlock_if_synchronized(G2_thread, 0, 641 in_bytes(JavaThread::do_not_unlock_if_synchronized_offset())); 642 // Since at this point in the method invocation the exception handler 643 // would try to exit the monitor of synchronized methods which hasn't 644 // been entered yet, we set the thread local variable 645 // _do_not_unlock_if_synchronized to true. If any exception was thrown by 646 // runtime, exception handling i.e. unlock_if_synchronized_method will 647 // check this thread local flag. 648 // This flag has two effects, one is to force an unwind in the topmost 649 // interpreter frame and not perform an unlock while doing so. 650 651 __ movbool(true, G3_scratch); 652 __ stbool(G3_scratch, do_not_unlock_if_synchronized); 653 654 655 // increment invocation counter and check for overflow 656 // 657 // Note: checking for negative value instead of overflow 658 // so we have a 'sticky' overflow test (may be of 659 // importance as soon as we have true MT/MP) 660 Label invocation_counter_overflow; 661 if (inc_counter) { 662 generate_counter_incr(&invocation_counter_overflow, NULL, NULL); 663 } 664 Label Lcontinue; 665 __ bind(Lcontinue); 666 667 bang_stack_shadow_pages(true); 668 // reset the _do_not_unlock_if_synchronized flag 669 __ stbool(G0, do_not_unlock_if_synchronized); 670 671 // check for synchronized methods 672 // Must happen AFTER invocation_counter check, so method is not locked 673 // if counter overflows. 674 675 if (synchronized) { 676 lock_method(); 677 // Don't see how G2_thread is preserved here... 678 // __ verify_thread(); QQQ destroys L0,L1 can't use 679 } else { 680 #ifdef ASSERT 681 { Label ok; 682 __ ld_ptr(STATE(_method), G5_method); 683 __ ld(access_flags, O0); 684 __ btst(JVM_ACC_SYNCHRONIZED, O0); 685 __ br( Assembler::zero, false, Assembler::pt, ok); 686 __ delayed()->nop(); 687 __ stop("method needs synchronization"); 688 __ bind(ok); 689 } 690 #endif // ASSERT 691 } 692 693 // start execution 694 695 // __ verify_thread(); kills L1,L2 can't use at the moment 696 697 // jvmti/jvmpi support 698 __ notify_method_entry(); 699 700 // native call 701 702 // (note that O0 is never an oop--at most it is a handle) 703 // It is important not to smash any handles created by this call, 704 // until any oop handle in O0 is dereferenced. 705 706 // (note that the space for outgoing params is preallocated) 707 708 // get signature handler 709 710 Label pending_exception_present; 711 712 { Label L; 713 __ ld_ptr(STATE(_method), G5_method); 714 __ ld_ptr(Address(G5_method, 0, in_bytes(Method::signature_handler_offset())), G3_scratch); 715 __ tst(G3_scratch); 716 __ brx(Assembler::notZero, false, Assembler::pt, L); 717 __ delayed()->nop(); 718 __ call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::prepare_native_call), G5_method, false); 719 __ ld_ptr(STATE(_method), G5_method); 720 721 Address exception_addr(G2_thread, 0, in_bytes(Thread::pending_exception_offset())); 722 __ ld_ptr(exception_addr, G3_scratch); 723 __ br_notnull_short(G3_scratch, Assembler::pn, pending_exception_present); 724 __ ld_ptr(Address(G5_method, 0, in_bytes(Method::signature_handler_offset())), G3_scratch); 725 __ bind(L); 726 } 727 728 // Push a new frame so that the args will really be stored in 729 // Copy a few locals across so the new frame has the variables 730 // we need but these values will be dead at the jni call and 731 // therefore not gc volatile like the values in the current 732 // frame (Lstate in particular) 733 734 // Flush the state pointer to the register save area 735 // Which is the only register we need for a stack walk. 736 __ st_ptr(Lstate, SP, (Lstate->sp_offset_in_saved_window() * wordSize) + STACK_BIAS); 737 738 __ mov(Lstate, O1); // Need to pass the state pointer across the frame 739 740 // Calculate current frame size 741 __ sub(SP, FP, O3); // Calculate negative of current frame size 742 __ save(SP, O3, SP); // Allocate an identical sized frame 743 744 __ mov(I1, Lstate); // In the "natural" register. 745 746 // Note I7 has leftover trash. Slow signature handler will fill it in 747 // should we get there. Normal jni call will set reasonable last_Java_pc 748 // below (and fix I7 so the stack trace doesn't have a meaningless frame 749 // in it). 750 751 752 // call signature handler 753 __ ld_ptr(STATE(_method), Lmethod); 754 __ ld_ptr(STATE(_locals), Llocals); 755 756 __ callr(G3_scratch, 0); 757 __ delayed()->nop(); 758 __ ld_ptr(STATE(_thread), G2_thread); // restore thread (shouldn't be needed) 759 760 { Label not_static; 761 762 __ ld_ptr(STATE(_method), G5_method); 763 __ ld(access_flags, O0); 764 __ btst(JVM_ACC_STATIC, O0); 765 __ br( Assembler::zero, false, Assembler::pt, not_static); 766 __ delayed()-> 767 // get native function entry point(O0 is a good temp until the very end) 768 ld_ptr(Address(G5_method, 0, in_bytes(Method::native_function_offset())), O0); 769 // for static methods insert the mirror argument 770 const int mirror_offset = in_bytes(Klass::java_mirror_offset()); 771 772 __ ld_ptr(Address(G5_method, 0, in_bytes(Method:: const_offset())), O1); 773 __ ld_ptr(Address(O1, 0, in_bytes(ConstMethod::constants_offset())), O1); 774 __ ld_ptr(Address(O1, 0, ConstantPool::pool_holder_offset_in_bytes()), O1); 775 __ ld_ptr(O1, mirror_offset, O1); 776 // where the mirror handle body is allocated: 777 #ifdef ASSERT 778 if (!PrintSignatureHandlers) // do not dirty the output with this 779 { Label L; 780 __ tst(O1); 781 __ brx(Assembler::notZero, false, Assembler::pt, L); 782 __ delayed()->nop(); 783 __ stop("mirror is missing"); 784 __ bind(L); 785 } 786 #endif // ASSERT 787 __ st_ptr(O1, STATE(_oop_temp)); 788 __ add(STATE(_oop_temp), O1); // this is really an LEA not an add 789 __ bind(not_static); 790 } 791 792 // At this point, arguments have been copied off of stack into 793 // their JNI positions, which are O1..O5 and SP[68..]. 794 // Oops are boxed in-place on the stack, with handles copied to arguments. 795 // The result handler is in Lscratch. O0 will shortly hold the JNIEnv*. 796 797 #ifdef ASSERT 798 { Label L; 799 __ tst(O0); 800 __ brx(Assembler::notZero, false, Assembler::pt, L); 801 __ delayed()->nop(); 802 __ stop("native entry point is missing"); 803 __ bind(L); 804 } 805 #endif // ASSERT 806 807 // 808 // setup the java frame anchor 809 // 810 // The scavenge function only needs to know that the PC of this frame is 811 // in the interpreter method entry code, it doesn't need to know the exact 812 // PC and hence we can use O7 which points to the return address from the 813 // previous call in the code stream (signature handler function) 814 // 815 // The other trick is we set last_Java_sp to FP instead of the usual SP because 816 // we have pushed the extra frame in order to protect the volatile register(s) 817 // in that frame when we return from the jni call 818 // 819 820 821 __ set_last_Java_frame(FP, O7); 822 __ mov(O7, I7); // make dummy interpreter frame look like one above, 823 // not meaningless information that'll confuse me. 824 825 // flush the windows now. We don't care about the current (protection) frame 826 // only the outer frames 827 828 __ flush_windows(); 829 830 // mark windows as flushed 831 Address flags(G2_thread, 832 0, 833 in_bytes(JavaThread::frame_anchor_offset()) + in_bytes(JavaFrameAnchor::flags_offset())); 834 __ set(JavaFrameAnchor::flushed, G3_scratch); 835 __ st(G3_scratch, flags); 836 837 // Transition from _thread_in_Java to _thread_in_native. We are already safepoint ready. 838 839 Address thread_state(G2_thread, 0, in_bytes(JavaThread::thread_state_offset())); 840 #ifdef ASSERT 841 { Label L; 842 __ ld(thread_state, G3_scratch); 843 __ cmp(G3_scratch, _thread_in_Java); 844 __ br(Assembler::equal, false, Assembler::pt, L); 845 __ delayed()->nop(); 846 __ stop("Wrong thread state in native stub"); 847 __ bind(L); 848 } 849 #endif // ASSERT 850 __ set(_thread_in_native, G3_scratch); 851 __ st(G3_scratch, thread_state); 852 853 // Call the jni method, using the delay slot to set the JNIEnv* argument. 854 __ callr(O0, 0); 855 __ delayed()-> 856 add(G2_thread, in_bytes(JavaThread::jni_environment_offset()), O0); 857 __ ld_ptr(STATE(_thread), G2_thread); // restore thread 858 859 // must we block? 860 861 // Block, if necessary, before resuming in _thread_in_Java state. 862 // In order for GC to work, don't clear the last_Java_sp until after blocking. 863 { Label no_block; 864 Address sync_state(G3_scratch, SafepointSynchronize::address_of_state()); 865 866 // Switch thread to "native transition" state before reading the synchronization state. 867 // This additional state is necessary because reading and testing the synchronization 868 // state is not atomic w.r.t. GC, as this scenario demonstrates: 869 // Java thread A, in _thread_in_native state, loads _not_synchronized and is preempted. 870 // VM thread changes sync state to synchronizing and suspends threads for GC. 871 // Thread A is resumed to finish this native method, but doesn't block here since it 872 // didn't see any synchronization is progress, and escapes. 873 __ set(_thread_in_native_trans, G3_scratch); 874 __ st(G3_scratch, thread_state); 875 if(os::is_MP()) { 876 // Write serialization page so VM thread can do a pseudo remote membar. 877 // We use the current thread pointer to calculate a thread specific 878 // offset to write to within the page. This minimizes bus traffic 879 // due to cache line collision. 880 __ serialize_memory(G2_thread, G1_scratch, G3_scratch); 881 } 882 __ load_contents(sync_state, G3_scratch); 883 __ cmp(G3_scratch, SafepointSynchronize::_not_synchronized); 884 885 886 Label L; 887 Address suspend_state(G2_thread, 0, in_bytes(JavaThread::suspend_flags_offset())); 888 __ br(Assembler::notEqual, false, Assembler::pn, L); 889 __ delayed()-> 890 ld(suspend_state, G3_scratch); 891 __ cmp(G3_scratch, 0); 892 __ br(Assembler::equal, false, Assembler::pt, no_block); 893 __ delayed()->nop(); 894 __ bind(L); 895 896 // Block. Save any potential method result value before the operation and 897 // use a leaf call to leave the last_Java_frame setup undisturbed. 898 save_native_result(); 899 __ call_VM_leaf(noreg, 900 CAST_FROM_FN_PTR(address, JavaThread::check_safepoint_and_suspend_for_native_trans), 901 G2_thread); 902 __ ld_ptr(STATE(_thread), G2_thread); // restore thread 903 // Restore any method result value 904 restore_native_result(); 905 __ bind(no_block); 906 } 907 908 // Clear the frame anchor now 909 910 __ reset_last_Java_frame(); 911 912 // Move the result handler address 913 __ mov(Lscratch, G3_scratch); 914 // return possible result to the outer frame 915 #ifndef __LP64 916 __ mov(O0, I0); 917 __ restore(O1, G0, O1); 918 #else 919 __ restore(O0, G0, O0); 920 #endif /* __LP64 */ 921 922 // Move result handler to expected register 923 __ mov(G3_scratch, Lscratch); 924 925 926 // thread state is thread_in_native_trans. Any safepoint blocking has 927 // happened in the trampoline we are ready to switch to thread_in_Java. 928 929 __ set(_thread_in_Java, G3_scratch); 930 __ st(G3_scratch, thread_state); 931 932 // If we have an oop result store it where it will be safe for any further gc 933 // until we return now that we've released the handle it might be protected by 934 935 { 936 Label no_oop, store_result; 937 938 __ set((intptr_t)AbstractInterpreter::result_handler(T_OBJECT), G3_scratch); 939 __ cmp(G3_scratch, Lscratch); 940 __ brx(Assembler::notEqual, false, Assembler::pt, no_oop); 941 __ delayed()->nop(); 942 __ addcc(G0, O0, O0); 943 __ brx(Assembler::notZero, true, Assembler::pt, store_result); // if result is not NULL: 944 __ delayed()->ld_ptr(O0, 0, O0); // unbox it 945 __ mov(G0, O0); 946 947 __ bind(store_result); 948 // Store it where gc will look for it and result handler expects it. 949 __ st_ptr(O0, STATE(_oop_temp)); 950 951 __ bind(no_oop); 952 953 } 954 955 // reset handle block 956 __ ld_ptr(G2_thread, in_bytes(JavaThread::active_handles_offset()), G3_scratch); 957 __ st_ptr(G0, G3_scratch, JNIHandleBlock::top_offset_in_bytes()); 958 959 960 // handle exceptions (exception handling will handle unlocking!) 961 { Label L; 962 Address exception_addr (G2_thread, 0, in_bytes(Thread::pending_exception_offset())); 963 964 __ ld_ptr(exception_addr, Gtemp); 965 __ tst(Gtemp); 966 __ brx(Assembler::equal, false, Assembler::pt, L); 967 __ delayed()->nop(); 968 __ bind(pending_exception_present); 969 // With c++ interpreter we just leave it pending caller will do the correct thing. However... 970 // Like x86 we ignore the result of the native call and leave the method locked. This 971 // seems wrong to leave things locked. 972 973 __ br(Assembler::always, false, Assembler::pt, StubRoutines::forward_exception_entry(), relocInfo::runtime_call_type); 974 __ delayed()->restore(I5_savedSP, G0, SP); // remove interpreter frame 975 976 __ bind(L); 977 } 978 979 // jvmdi/jvmpi support (preserves thread register) 980 __ notify_method_exit(true, ilgl, InterpreterMacroAssembler::NotifyJVMTI); 981 982 if (synchronized) { 983 // save and restore any potential method result value around the unlocking operation 984 save_native_result(); 985 986 const int entry_size = frame::interpreter_frame_monitor_size() * wordSize; 987 // Get the initial monitor we allocated 988 __ sub(Lstate, entry_size, O1); // initial monitor 989 __ unlock_object(O1); 990 restore_native_result(); 991 } 992 993 #if defined(COMPILER2) && !defined(_LP64) 994 995 // C2 expects long results in G1 we can't tell if we're returning to interpreted 996 // or compiled so just be safe. 997 998 __ sllx(O0, 32, G1); // Shift bits into high G1 999 __ srl (O1, 0, O1); // Zero extend O1 1000 __ or3 (O1, G1, G1); // OR 64 bits into G1 1001 1002 #endif /* COMPILER2 && !_LP64 */ 1003 1004 #ifdef ASSERT 1005 { 1006 Label ok; 1007 __ cmp(I5_savedSP, FP); 1008 __ brx(Assembler::greaterEqualUnsigned, false, Assembler::pt, ok); 1009 __ delayed()->nop(); 1010 __ stop("bad I5_savedSP value"); 1011 __ should_not_reach_here(); 1012 __ bind(ok); 1013 } 1014 #endif 1015 // Calls result handler which POPS FRAME 1016 if (TraceJumps) { 1017 // Move target to register that is recordable 1018 __ mov(Lscratch, G3_scratch); 1019 __ JMP(G3_scratch, 0); 1020 } else { 1021 __ jmp(Lscratch, 0); 1022 } 1023 __ delayed()->nop(); 1024 1025 if (inc_counter) { 1026 // handle invocation counter overflow 1027 __ bind(invocation_counter_overflow); 1028 generate_counter_overflow(Lcontinue); 1029 } 1030 1031 1032 return entry; 1033 } 1034 1035 void CppInterpreterGenerator::generate_compute_interpreter_state(const Register state, 1036 const Register prev_state, 1037 bool native) { 1038 1039 // On entry 1040 // G5_method - caller's method 1041 // Gargs - points to initial parameters (i.e. locals[0]) 1042 // G2_thread - valid? (C1 only??) 1043 // "prev_state" - contains any previous frame manager state which we must save a link 1044 // 1045 // On return 1046 // "state" is a pointer to the newly allocated state object. We must allocate and initialize 1047 // a new interpretState object and the method expression stack. 1048 1049 assert_different_registers(state, prev_state); 1050 assert_different_registers(prev_state, G3_scratch); 1051 const Register Gtmp = G3_scratch; 1052 const Address constMethod (G5_method, 0, in_bytes(Method::const_offset())); 1053 const Address access_flags (G5_method, 0, in_bytes(Method::access_flags_offset())); 1054 1055 // slop factor is two extra slots on the expression stack so that 1056 // we always have room to store a result when returning from a call without parameters 1057 // that returns a result. 1058 1059 const int slop_factor = 2*wordSize; 1060 1061 const int fixed_size = ((sizeof(BytecodeInterpreter) + slop_factor) >> LogBytesPerWord) + // what is the slop factor? 1062 //6815692//Method::extra_stack_words() + // extra push slots for MH adapters 1063 frame::memory_parameter_word_sp_offset + // register save area + param window 1064 (native ? frame::interpreter_frame_extra_outgoing_argument_words : 0); // JNI, class 1065 1066 // XXX G5_method valid 1067 1068 // Now compute new frame size 1069 1070 if (native) { 1071 const Register RconstMethod = Gtmp; 1072 const Address size_of_parameters(RconstMethod, 0, in_bytes(ConstMethod::size_of_parameters_offset())); 1073 __ ld_ptr(constMethod, RconstMethod); 1074 __ lduh( size_of_parameters, Gtmp ); 1075 __ calc_mem_param_words(Gtmp, Gtmp); // space for native call parameters passed on the stack in words 1076 } else { 1077 // Full size expression stack 1078 __ ld_ptr(constMethod, Gtmp); 1079 __ lduh(Gtmp, in_bytes(ConstMethod::max_stack_offset()), Gtmp); 1080 } 1081 __ add(Gtmp, fixed_size, Gtmp); // plus the fixed portion 1082 1083 __ neg(Gtmp); // negative space for stack/parameters in words 1084 __ and3(Gtmp, -WordsPerLong, Gtmp); // make multiple of 2 (SP must be 2-word aligned) 1085 __ sll(Gtmp, LogBytesPerWord, Gtmp); // negative space for frame in bytes 1086 1087 // Need to do stack size check here before we fault on large frames 1088 1089 Label stack_ok; 1090 1091 const int max_pages = StackShadowPages > (StackRedPages+StackYellowPages) ? StackShadowPages : 1092 (StackRedPages+StackYellowPages); 1093 1094 1095 __ ld_ptr(G2_thread, in_bytes(Thread::stack_base_offset()), O0); 1096 __ ld_ptr(G2_thread, in_bytes(Thread::stack_size_offset()), O1); 1097 // compute stack bottom 1098 __ sub(O0, O1, O0); 1099 1100 // Avoid touching the guard pages 1101 // Also a fudge for frame size of BytecodeInterpreter::run 1102 // It varies from 1k->4k depending on build type 1103 const int fudge = 6 * K; 1104 1105 __ set(fudge + (max_pages * os::vm_page_size()), O1); 1106 1107 __ add(O0, O1, O0); 1108 __ sub(O0, Gtmp, O0); 1109 __ cmp(SP, O0); 1110 __ brx(Assembler::greaterUnsigned, false, Assembler::pt, stack_ok); 1111 __ delayed()->nop(); 1112 1113 // throw exception return address becomes throwing pc 1114 1115 __ call_VM(Oexception, CAST_FROM_FN_PTR(address, InterpreterRuntime::throw_StackOverflowError)); 1116 __ stop("never reached"); 1117 1118 __ bind(stack_ok); 1119 1120 __ save(SP, Gtmp, SP); // setup new frame and register window 1121 1122 // New window I7 call_stub or previous activation 1123 // O6 - register save area, BytecodeInterpreter just below it, args/locals just above that 1124 // 1125 __ sub(FP, sizeof(BytecodeInterpreter), state); // Point to new Interpreter state 1126 __ add(state, STACK_BIAS, state ); // Account for 64bit bias 1127 1128 #define XXX_STATE(field_name) state, in_bytes(byte_offset_of(BytecodeInterpreter, field_name)) 1129 1130 // Initialize a new Interpreter state 1131 // orig_sp - caller's original sp 1132 // G2_thread - thread 1133 // Gargs - &locals[0] (unbiased?) 1134 // G5_method - method 1135 // SP (biased) - accounts for full size java stack, BytecodeInterpreter object, register save area, and register parameter save window 1136 1137 1138 __ set(0xdead0004, O1); 1139 1140 1141 __ st_ptr(Gargs, XXX_STATE(_locals)); 1142 __ st_ptr(G0, XXX_STATE(_oop_temp)); 1143 1144 __ st_ptr(state, XXX_STATE(_self_link)); // point to self 1145 __ st_ptr(prev_state->after_save(), XXX_STATE(_prev_link)); // Chain interpreter states 1146 __ st_ptr(G2_thread, XXX_STATE(_thread)); // Store javathread 1147 1148 if (native) { 1149 __ st_ptr(G0, XXX_STATE(_bcp)); 1150 } else { 1151 __ ld_ptr(G5_method, in_bytes(Method::const_offset()), O2); // get ConstMethod* 1152 __ add(O2, in_bytes(ConstMethod::codes_offset()), O2); // get bcp 1153 __ st_ptr(O2, XXX_STATE(_bcp)); 1154 } 1155 1156 __ st_ptr(G0, XXX_STATE(_mdx)); 1157 __ st_ptr(G5_method, XXX_STATE(_method)); 1158 1159 __ set((int) BytecodeInterpreter::method_entry, O1); 1160 __ st(O1, XXX_STATE(_msg)); 1161 1162 __ ld_ptr(constMethod, O3); 1163 __ ld_ptr(O3, in_bytes(ConstMethod::constants_offset()), O3); 1164 __ ld_ptr(O3, ConstantPool::cache_offset_in_bytes(), O2); 1165 __ st_ptr(O2, XXX_STATE(_constants)); 1166 1167 __ st_ptr(G0, XXX_STATE(_result._to_call._callee)); 1168 1169 // Monitor base is just start of BytecodeInterpreter object; 1170 __ mov(state, O2); 1171 __ st_ptr(O2, XXX_STATE(_monitor_base)); 1172 1173 // Do we need a monitor for synchonized method? 1174 { 1175 __ ld(access_flags, O1); 1176 Label done; 1177 Label got_obj; 1178 __ btst(JVM_ACC_SYNCHRONIZED, O1); 1179 __ br( Assembler::zero, false, Assembler::pt, done); 1180 1181 const int mirror_offset = in_bytes(Klass::java_mirror_offset()); 1182 __ delayed()->btst(JVM_ACC_STATIC, O1); 1183 __ ld_ptr(XXX_STATE(_locals), O1); 1184 __ br( Assembler::zero, true, Assembler::pt, got_obj); 1185 __ delayed()->ld_ptr(O1, 0, O1); // get receiver for not-static case 1186 __ ld_ptr(constMethod, O1); 1187 __ ld_ptr( O1, in_bytes(ConstMethod::constants_offset()), O1); 1188 __ ld_ptr( O1, ConstantPool::pool_holder_offset_in_bytes(), O1); 1189 // lock the mirror, not the Klass* 1190 __ ld_ptr( O1, mirror_offset, O1); 1191 1192 __ bind(got_obj); 1193 1194 #ifdef ASSERT 1195 __ tst(O1); 1196 __ breakpoint_trap(Assembler::zero, Assembler::ptr_cc); 1197 #endif // ASSERT 1198 1199 const int entry_size = frame::interpreter_frame_monitor_size() * wordSize; 1200 __ sub(SP, entry_size, SP); // account for initial monitor 1201 __ sub(O2, entry_size, O2); // initial monitor 1202 __ st_ptr(O1, O2, BasicObjectLock::obj_offset_in_bytes()); // and allocate it for interpreter use 1203 __ bind(done); 1204 } 1205 1206 // Remember initial frame bottom 1207 1208 __ st_ptr(SP, XXX_STATE(_frame_bottom)); 1209 1210 __ st_ptr(O2, XXX_STATE(_stack_base)); 1211 1212 __ sub(O2, wordSize, O2); // prepush 1213 __ st_ptr(O2, XXX_STATE(_stack)); // PREPUSH 1214 1215 // Full size expression stack 1216 __ ld_ptr(constMethod, O3); 1217 __ lduh(O3, in_bytes(ConstMethod::max_stack_offset()), O3); 1218 guarantee(!EnableInvokeDynamic, "no support yet for java.lang.invoke.MethodHandle"); //6815692 1219 //6815692//if (EnableInvokeDynamic) 1220 //6815692// __ inc(O3, Method::extra_stack_entries()); 1221 __ sll(O3, LogBytesPerWord, O3); 1222 __ sub(O2, O3, O3); 1223 // __ sub(O3, wordSize, O3); // so prepush doesn't look out of bounds 1224 __ st_ptr(O3, XXX_STATE(_stack_limit)); 1225 1226 if (!native) { 1227 // 1228 // Code to initialize locals 1229 // 1230 Register init_value = noreg; // will be G0 if we must clear locals 1231 // Now zero locals 1232 if (true /* zerolocals */ || ClearInterpreterLocals) { 1233 // explicitly initialize locals 1234 init_value = G0; 1235 } else { 1236 #ifdef ASSERT 1237 // initialize locals to a garbage pattern for better debugging 1238 init_value = O3; 1239 __ set( 0x0F0F0F0F, init_value ); 1240 #endif // ASSERT 1241 } 1242 if (init_value != noreg) { 1243 Label clear_loop; 1244 const Register RconstMethod = O1; 1245 const Address size_of_parameters(RconstMethod, 0, in_bytes(ConstMethod::size_of_parameters_offset())); 1246 const Address size_of_locals (RconstMethod, 0, in_bytes(ConstMethod::size_of_locals_offset())); 1247 1248 // NOTE: If you change the frame layout, this code will need to 1249 // be updated! 1250 __ ld_ptr( constMethod, RconstMethod ); 1251 __ lduh( size_of_locals, O2 ); 1252 __ lduh( size_of_parameters, O1 ); 1253 __ sll( O2, LogBytesPerWord, O2); 1254 __ sll( O1, LogBytesPerWord, O1 ); 1255 __ ld_ptr(XXX_STATE(_locals), L2_scratch); 1256 __ sub( L2_scratch, O2, O2 ); 1257 __ sub( L2_scratch, O1, O1 ); 1258 1259 __ bind( clear_loop ); 1260 __ inc( O2, wordSize ); 1261 1262 __ cmp( O2, O1 ); 1263 __ br( Assembler::lessEqualUnsigned, true, Assembler::pt, clear_loop ); 1264 __ delayed()->st_ptr( init_value, O2, 0 ); 1265 } 1266 } 1267 } 1268 // Find preallocated monitor and lock method (C++ interpreter) 1269 // 1270 void InterpreterGenerator::lock_method(void) { 1271 // Lock the current method. 1272 // Destroys registers L2_scratch, L3_scratch, O0 1273 // 1274 // Find everything relative to Lstate 1275 1276 #ifdef ASSERT 1277 __ ld_ptr(STATE(_method), L2_scratch); 1278 __ ld(L2_scratch, in_bytes(Method::access_flags_offset()), O0); 1279 1280 { Label ok; 1281 __ btst(JVM_ACC_SYNCHRONIZED, O0); 1282 __ br( Assembler::notZero, false, Assembler::pt, ok); 1283 __ delayed()->nop(); 1284 __ stop("method doesn't need synchronization"); 1285 __ bind(ok); 1286 } 1287 #endif // ASSERT 1288 1289 // monitor is already allocated at stack base 1290 // and the lockee is already present 1291 __ ld_ptr(STATE(_stack_base), L2_scratch); 1292 __ ld_ptr(L2_scratch, BasicObjectLock::obj_offset_in_bytes(), O0); // get object 1293 __ lock_object(L2_scratch, O0); 1294 1295 } 1296 1297 // Generate code for handling resuming a deopted method 1298 void CppInterpreterGenerator::generate_deopt_handling() { 1299 1300 Label return_from_deopt_common; 1301 1302 // deopt needs to jump to here to enter the interpreter (return a result) 1303 deopt_frame_manager_return_atos = __ pc(); 1304 1305 // O0/O1 live 1306 __ ba(return_from_deopt_common); 1307 __ delayed()->set(AbstractInterpreter::BasicType_as_index(T_OBJECT), L3_scratch); // Result stub address array index 1308 1309 1310 // deopt needs to jump to here to enter the interpreter (return a result) 1311 deopt_frame_manager_return_btos = __ pc(); 1312 1313 // O0/O1 live 1314 __ ba(return_from_deopt_common); 1315 __ delayed()->set(AbstractInterpreter::BasicType_as_index(T_BOOLEAN), L3_scratch); // Result stub address array index 1316 1317 // deopt needs to jump to here to enter the interpreter (return a result) 1318 deopt_frame_manager_return_itos = __ pc(); 1319 1320 // O0/O1 live 1321 __ ba(return_from_deopt_common); 1322 __ delayed()->set(AbstractInterpreter::BasicType_as_index(T_INT), L3_scratch); // Result stub address array index 1323 1324 // deopt needs to jump to here to enter the interpreter (return a result) 1325 1326 deopt_frame_manager_return_ltos = __ pc(); 1327 #if !defined(_LP64) && defined(COMPILER2) 1328 // All return values are where we want them, except for Longs. C2 returns 1329 // longs in G1 in the 32-bit build whereas the interpreter wants them in O0/O1. 1330 // Since the interpreter will return longs in G1 and O0/O1 in the 32bit 1331 // build even if we are returning from interpreted we just do a little 1332 // stupid shuffing. 1333 // Note: I tried to make c2 return longs in O0/O1 and G1 so we wouldn't have to 1334 // do this here. Unfortunately if we did a rethrow we'd see an machepilog node 1335 // first which would move g1 -> O0/O1 and destroy the exception we were throwing. 1336 1337 __ srl (G1, 0,O1); 1338 __ srlx(G1,32,O0); 1339 #endif /* !_LP64 && COMPILER2 */ 1340 // O0/O1 live 1341 __ ba(return_from_deopt_common); 1342 __ delayed()->set(AbstractInterpreter::BasicType_as_index(T_LONG), L3_scratch); // Result stub address array index 1343 1344 // deopt needs to jump to here to enter the interpreter (return a result) 1345 1346 deopt_frame_manager_return_ftos = __ pc(); 1347 // O0/O1 live 1348 __ ba(return_from_deopt_common); 1349 __ delayed()->set(AbstractInterpreter::BasicType_as_index(T_FLOAT), L3_scratch); // Result stub address array index 1350 1351 // deopt needs to jump to here to enter the interpreter (return a result) 1352 deopt_frame_manager_return_dtos = __ pc(); 1353 1354 // O0/O1 live 1355 __ ba(return_from_deopt_common); 1356 __ delayed()->set(AbstractInterpreter::BasicType_as_index(T_DOUBLE), L3_scratch); // Result stub address array index 1357 1358 // deopt needs to jump to here to enter the interpreter (return a result) 1359 deopt_frame_manager_return_vtos = __ pc(); 1360 1361 // O0/O1 live 1362 __ set(AbstractInterpreter::BasicType_as_index(T_VOID), L3_scratch); 1363 1364 // Deopt return common 1365 // an index is present that lets us move any possible result being 1366 // return to the interpreter's stack 1367 // 1368 __ bind(return_from_deopt_common); 1369 1370 // Result if any is in native abi result (O0..O1/F0..F1). The java expression 1371 // stack is in the state that the calling convention left it. 1372 // Copy the result from native abi result and place it on java expression stack. 1373 1374 // Current interpreter state is present in Lstate 1375 1376 // Get current pre-pushed top of interpreter stack 1377 // Any result (if any) is in native abi 1378 // result type index is in L3_scratch 1379 1380 __ ld_ptr(STATE(_stack), L1_scratch); // get top of java expr stack 1381 1382 __ set((intptr_t)CppInterpreter::_tosca_to_stack, L4_scratch); 1383 __ sll(L3_scratch, LogBytesPerWord, L3_scratch); 1384 __ ld_ptr(L4_scratch, L3_scratch, Lscratch); // get typed result converter address 1385 __ jmpl(Lscratch, G0, O7); // and convert it 1386 __ delayed()->nop(); 1387 1388 // L1_scratch points to top of stack (prepushed) 1389 __ st_ptr(L1_scratch, STATE(_stack)); 1390 } 1391 1392 // Generate the code to handle a more_monitors message from the c++ interpreter 1393 void CppInterpreterGenerator::generate_more_monitors() { 1394 1395 Label entry, loop; 1396 const int entry_size = frame::interpreter_frame_monitor_size() * wordSize; 1397 // 1. compute new pointers // esp: old expression stack top 1398 __ delayed()->ld_ptr(STATE(_stack_base), L4_scratch); // current expression stack bottom 1399 __ sub(L4_scratch, entry_size, L4_scratch); 1400 __ st_ptr(L4_scratch, STATE(_stack_base)); 1401 1402 __ sub(SP, entry_size, SP); // Grow stack 1403 __ st_ptr(SP, STATE(_frame_bottom)); 1404 1405 __ ld_ptr(STATE(_stack_limit), L2_scratch); 1406 __ sub(L2_scratch, entry_size, L2_scratch); 1407 __ st_ptr(L2_scratch, STATE(_stack_limit)); 1408 1409 __ ld_ptr(STATE(_stack), L1_scratch); // Get current stack top 1410 __ sub(L1_scratch, entry_size, L1_scratch); 1411 __ st_ptr(L1_scratch, STATE(_stack)); 1412 __ ba(entry); 1413 __ delayed()->add(L1_scratch, wordSize, L1_scratch); // first real entry (undo prepush) 1414 1415 // 2. move expression stack 1416 1417 __ bind(loop); 1418 __ st_ptr(L3_scratch, Address(L1_scratch, 0)); 1419 __ add(L1_scratch, wordSize, L1_scratch); 1420 __ bind(entry); 1421 __ cmp(L1_scratch, L4_scratch); 1422 __ br(Assembler::notEqual, false, Assembler::pt, loop); 1423 __ delayed()->ld_ptr(L1_scratch, entry_size, L3_scratch); 1424 1425 // now zero the slot so we can find it. 1426 __ st_ptr(G0, L4_scratch, BasicObjectLock::obj_offset_in_bytes()); 1427 1428 } 1429 1430 // Initial entry to C++ interpreter from the call_stub. 1431 // This entry point is called the frame manager since it handles the generation 1432 // of interpreter activation frames via requests directly from the vm (via call_stub) 1433 // and via requests from the interpreter. The requests from the call_stub happen 1434 // directly thru the entry point. Requests from the interpreter happen via returning 1435 // from the interpreter and examining the message the interpreter has returned to 1436 // the frame manager. The frame manager can take the following requests: 1437 1438 // NO_REQUEST - error, should never happen. 1439 // MORE_MONITORS - need a new monitor. Shuffle the expression stack on down and 1440 // allocate a new monitor. 1441 // CALL_METHOD - setup a new activation to call a new method. Very similar to what 1442 // happens during entry during the entry via the call stub. 1443 // RETURN_FROM_METHOD - remove an activation. Return to interpreter or call stub. 1444 // 1445 // Arguments: 1446 // 1447 // ebx: Method* 1448 // ecx: receiver - unused (retrieved from stack as needed) 1449 // esi: previous frame manager state (NULL from the call_stub/c1/c2) 1450 // 1451 // 1452 // Stack layout at entry 1453 // 1454 // [ return address ] <--- esp 1455 // [ parameter n ] 1456 // ... 1457 // [ parameter 1 ] 1458 // [ expression stack ] 1459 // 1460 // 1461 // We are free to blow any registers we like because the call_stub which brought us here 1462 // initially has preserved the callee save registers already. 1463 // 1464 // 1465 1466 static address interpreter_frame_manager = NULL; 1467 1468 #ifdef ASSERT 1469 #define VALIDATE_STATE(scratch, marker) \ 1470 { \ 1471 Label skip; \ 1472 __ ld_ptr(STATE(_self_link), scratch); \ 1473 __ cmp(Lstate, scratch); \ 1474 __ brx(Assembler::equal, false, Assembler::pt, skip); \ 1475 __ delayed()->nop(); \ 1476 __ breakpoint_trap(); \ 1477 __ emit_int32(marker); \ 1478 __ bind(skip); \ 1479 } 1480 #else 1481 #define VALIDATE_STATE(scratch, marker) 1482 #endif /* ASSERT */ 1483 1484 void CppInterpreterGenerator::adjust_callers_stack(Register args) { 1485 // 1486 // Adjust caller's stack so that all the locals can be contiguous with 1487 // the parameters. 1488 // Worries about stack overflow make this a pain. 1489 // 1490 // Destroys args, G3_scratch, G3_scratch 1491 // In/Out O5_savedSP (sender's original SP) 1492 // 1493 // assert_different_registers(state, prev_state); 1494 const Register Gtmp = G3_scratch; 1495 const RconstMethod = G3_scratch; 1496 const Register tmp = O2; 1497 const Address constMethod(G5_method, 0, in_bytes(Method::const_offset())); 1498 const Address size_of_parameters(RconstMethod, 0, in_bytes(ConstMethod::size_of_parameters_offset())); 1499 const Address size_of_locals (RconstMethod, 0, in_bytes(ConstMethod::size_of_locals_offset())); 1500 1501 __ ld_ptr(constMethod, RconstMethod); 1502 __ lduh(size_of_parameters, tmp); 1503 __ sll(tmp, LogBytesPerWord, Gargs); // parameter size in bytes 1504 __ add(args, Gargs, Gargs); // points to first local + BytesPerWord 1505 // NEW 1506 __ add(Gargs, -wordSize, Gargs); // points to first local[0] 1507 // determine extra space for non-argument locals & adjust caller's SP 1508 // Gtmp1: parameter size in words 1509 __ lduh(size_of_locals, Gtmp); 1510 __ compute_extra_locals_size_in_bytes(tmp, Gtmp, Gtmp); 1511 1512 #if 1 1513 // c2i adapters place the final interpreter argument in the register save area for O0/I0 1514 // the call_stub will place the final interpreter argument at 1515 // frame::memory_parameter_word_sp_offset. This is mostly not noticable for either asm 1516 // or c++ interpreter. However with the c++ interpreter when we do a recursive call 1517 // and try to make it look good in the debugger we will store the argument to 1518 // RecursiveInterpreterActivation in the register argument save area. Without allocating 1519 // extra space for the compiler this will overwrite locals in the local array of the 1520 // interpreter. 1521 // QQQ still needed with frameless adapters??? 1522 1523 const int c2i_adjust_words = frame::memory_parameter_word_sp_offset - frame::callee_register_argument_save_area_sp_offset; 1524 1525 __ add(Gtmp, c2i_adjust_words*wordSize, Gtmp); 1526 #endif // 1 1527 1528 1529 __ sub(SP, Gtmp, SP); // just caller's frame for the additional space we need. 1530 } 1531 1532 address InterpreterGenerator::generate_normal_entry(bool synchronized) { 1533 1534 // G5_method: Method* 1535 // G2_thread: thread (unused) 1536 // Gargs: bottom of args (sender_sp) 1537 // O5: sender's sp 1538 1539 // A single frame manager is plenty as we don't specialize for synchronized. We could and 1540 // the code is pretty much ready. Would need to change the test below and for good measure 1541 // modify generate_interpreter_state to only do the (pre) sync stuff stuff for synchronized 1542 // routines. Not clear this is worth it yet. 1543 1544 if (interpreter_frame_manager) { 1545 return interpreter_frame_manager; 1546 } 1547 1548 __ bind(frame_manager_entry); 1549 1550 // the following temporary registers are used during frame creation 1551 const Register Gtmp1 = G3_scratch; 1552 // const Register Lmirror = L1; // native mirror (native calls only) 1553 1554 const Address constMethod (G5_method, 0, in_bytes(Method::const_offset())); 1555 const Address access_flags (G5_method, 0, in_bytes(Method::access_flags_offset())); 1556 1557 address entry_point = __ pc(); 1558 __ mov(G0, prevState); // no current activation 1559 1560 1561 Label re_dispatch; 1562 1563 __ bind(re_dispatch); 1564 1565 // Interpreter needs to have locals completely contiguous. In order to do that 1566 // We must adjust the caller's stack pointer for any locals beyond just the 1567 // parameters 1568 adjust_callers_stack(Gargs); 1569 1570 // O5_savedSP still contains sender's sp 1571 1572 // NEW FRAME 1573 1574 generate_compute_interpreter_state(Lstate, prevState, false); 1575 1576 // At this point a new interpreter frame and state object are created and initialized 1577 // Lstate has the pointer to the new activation 1578 // Any stack banging or limit check should already be done. 1579 1580 Label call_interpreter; 1581 1582 __ bind(call_interpreter); 1583 1584 1585 #if 1 1586 __ set(0xdead002, Lmirror); 1587 __ set(0xdead002, L2_scratch); 1588 __ set(0xdead003, L3_scratch); 1589 __ set(0xdead004, L4_scratch); 1590 __ set(0xdead005, Lscratch); 1591 __ set(0xdead006, Lscratch2); 1592 __ set(0xdead007, L7_scratch); 1593 1594 __ set(0xdeaf002, O2); 1595 __ set(0xdeaf003, O3); 1596 __ set(0xdeaf004, O4); 1597 __ set(0xdeaf005, O5); 1598 #endif 1599 1600 // Call interpreter (stack bang complete) enter here if message is 1601 // set and we know stack size is valid 1602 1603 Label call_interpreter_2; 1604 1605 __ bind(call_interpreter_2); 1606 1607 #ifdef ASSERT 1608 { 1609 Label skip; 1610 __ ld_ptr(STATE(_frame_bottom), G3_scratch); 1611 __ cmp(G3_scratch, SP); 1612 __ brx(Assembler::equal, false, Assembler::pt, skip); 1613 __ delayed()->nop(); 1614 __ stop("SP not restored to frame bottom"); 1615 __ bind(skip); 1616 } 1617 #endif 1618 1619 VALIDATE_STATE(G3_scratch, 4); 1620 __ set_last_Java_frame(SP, noreg); 1621 __ mov(Lstate, O0); // (arg) pointer to current state 1622 1623 __ call(CAST_FROM_FN_PTR(address, 1624 JvmtiExport::can_post_interpreter_events() ? 1625 BytecodeInterpreter::runWithChecks 1626 : BytecodeInterpreter::run), 1627 relocInfo::runtime_call_type); 1628 1629 __ delayed()->nop(); 1630 1631 __ ld_ptr(STATE(_thread), G2_thread); 1632 __ reset_last_Java_frame(); 1633 1634 // examine msg from interpreter to determine next action 1635 __ ld_ptr(STATE(_thread), G2_thread); // restore G2_thread 1636 1637 __ ld(STATE(_msg), L1_scratch); // Get new message 1638 1639 Label call_method; 1640 Label return_from_interpreted_method; 1641 Label throw_exception; 1642 Label do_OSR; 1643 Label bad_msg; 1644 Label resume_interpreter; 1645 1646 __ cmp(L1_scratch, (int)BytecodeInterpreter::call_method); 1647 __ br(Assembler::equal, false, Assembler::pt, call_method); 1648 __ delayed()->cmp(L1_scratch, (int)BytecodeInterpreter::return_from_method); 1649 __ br(Assembler::equal, false, Assembler::pt, return_from_interpreted_method); 1650 __ delayed()->cmp(L1_scratch, (int)BytecodeInterpreter::throwing_exception); 1651 __ br(Assembler::equal, false, Assembler::pt, throw_exception); 1652 __ delayed()->cmp(L1_scratch, (int)BytecodeInterpreter::do_osr); 1653 __ br(Assembler::equal, false, Assembler::pt, do_OSR); 1654 __ delayed()->cmp(L1_scratch, (int)BytecodeInterpreter::more_monitors); 1655 __ br(Assembler::notEqual, false, Assembler::pt, bad_msg); 1656 1657 // Allocate more monitor space, shuffle expression stack.... 1658 1659 generate_more_monitors(); 1660 1661 // new monitor slot allocated, resume the interpreter. 1662 1663 __ set((int)BytecodeInterpreter::got_monitors, L1_scratch); 1664 VALIDATE_STATE(G3_scratch, 5); 1665 __ ba(call_interpreter); 1666 __ delayed()->st(L1_scratch, STATE(_msg)); 1667 1668 // uncommon trap needs to jump to here to enter the interpreter (re-execute current bytecode) 1669 unctrap_frame_manager_entry = __ pc(); 1670 1671 // QQQ what message do we send 1672 1673 __ ba(call_interpreter); 1674 __ delayed()->ld_ptr(STATE(_frame_bottom), SP); // restore to full stack frame 1675 1676 //============================================================================= 1677 // Returning from a compiled method into a deopted method. The bytecode at the 1678 // bcp has completed. The result of the bytecode is in the native abi (the tosca 1679 // for the template based interpreter). Any stack space that was used by the 1680 // bytecode that has completed has been removed (e.g. parameters for an invoke) 1681 // so all that we have to do is place any pending result on the expression stack 1682 // and resume execution on the next bytecode. 1683 1684 generate_deopt_handling(); 1685 1686 // ready to resume the interpreter 1687 1688 __ set((int)BytecodeInterpreter::deopt_resume, L1_scratch); 1689 __ ba(call_interpreter); 1690 __ delayed()->st(L1_scratch, STATE(_msg)); 1691 1692 // Current frame has caught an exception we need to dispatch to the 1693 // handler. We can get here because a native interpreter frame caught 1694 // an exception in which case there is no handler and we must rethrow 1695 // If it is a vanilla interpreted frame the we simply drop into the 1696 // interpreter and let it do the lookup. 1697 1698 Interpreter::_rethrow_exception_entry = __ pc(); 1699 1700 Label return_with_exception; 1701 Label unwind_and_forward; 1702 1703 // O0: exception 1704 // O7: throwing pc 1705 1706 // We want exception in the thread no matter what we ultimately decide about frame type. 1707 1708 Address exception_addr (G2_thread, 0, in_bytes(Thread::pending_exception_offset())); 1709 __ verify_thread(); 1710 __ st_ptr(O0, exception_addr); 1711 1712 // get the Method* 1713 __ ld_ptr(STATE(_method), G5_method); 1714 1715 // if this current frame vanilla or native? 1716 1717 __ ld(access_flags, Gtmp1); 1718 __ btst(JVM_ACC_NATIVE, Gtmp1); 1719 __ br(Assembler::zero, false, Assembler::pt, return_with_exception); // vanilla interpreted frame handle directly 1720 __ delayed()->nop(); 1721 1722 // We drop thru to unwind a native interpreted frame with a pending exception 1723 // We jump here for the initial interpreter frame with exception pending 1724 // We unwind the current acivation and forward it to our caller. 1725 1726 __ bind(unwind_and_forward); 1727 1728 // Unwind frame and jump to forward exception. unwinding will place throwing pc in O7 1729 // as expected by forward_exception. 1730 1731 __ restore(FP, G0, SP); // unwind interpreter state frame 1732 __ br(Assembler::always, false, Assembler::pt, StubRoutines::forward_exception_entry(), relocInfo::runtime_call_type); 1733 __ delayed()->mov(I5_savedSP->after_restore(), SP); 1734 1735 // Return point from a call which returns a result in the native abi 1736 // (c1/c2/jni-native). This result must be processed onto the java 1737 // expression stack. 1738 // 1739 // A pending exception may be present in which case there is no result present 1740 1741 address return_from_native_method = __ pc(); 1742 1743 VALIDATE_STATE(G3_scratch, 6); 1744 1745 // Result if any is in native abi result (O0..O1/F0..F1). The java expression 1746 // stack is in the state that the calling convention left it. 1747 // Copy the result from native abi result and place it on java expression stack. 1748 1749 // Current interpreter state is present in Lstate 1750 1751 // Exception pending? 1752 1753 __ ld_ptr(STATE(_frame_bottom), SP); // restore to full stack frame 1754 __ ld_ptr(exception_addr, Lscratch); // get any pending exception 1755 __ tst(Lscratch); // exception pending? 1756 __ brx(Assembler::notZero, false, Assembler::pt, return_with_exception); 1757 __ delayed()->nop(); 1758 1759 // Process the native abi result to java expression stack 1760 1761 __ ld_ptr(STATE(_result._to_call._callee), L4_scratch); // called method 1762 __ ld_ptr(STATE(_stack), L1_scratch); // get top of java expr stack 1763 // get parameter size 1764 __ ld_ptr(L4_scratch, in_bytes(Method::const_offset()), L2_scratch); 1765 __ lduh(L2_scratch, in_bytes(ConstMethod::size_of_parameters_offset()), L2_scratch); 1766 __ sll(L2_scratch, LogBytesPerWord, L2_scratch ); // parameter size in bytes 1767 __ add(L1_scratch, L2_scratch, L1_scratch); // stack destination for result 1768 __ ld(L4_scratch, in_bytes(Method::result_index_offset()), L3_scratch); // called method result type index 1769 1770 // tosca is really just native abi 1771 __ set((intptr_t)CppInterpreter::_tosca_to_stack, L4_scratch); 1772 __ sll(L3_scratch, LogBytesPerWord, L3_scratch); 1773 __ ld_ptr(L4_scratch, L3_scratch, Lscratch); // get typed result converter address 1774 __ jmpl(Lscratch, G0, O7); // and convert it 1775 __ delayed()->nop(); 1776 1777 // L1_scratch points to top of stack (prepushed) 1778 1779 __ ba(resume_interpreter); 1780 __ delayed()->mov(L1_scratch, O1); 1781 1782 // An exception is being caught on return to a vanilla interpreter frame. 1783 // Empty the stack and resume interpreter 1784 1785 __ bind(return_with_exception); 1786 1787 __ ld_ptr(STATE(_frame_bottom), SP); // restore to full stack frame 1788 __ ld_ptr(STATE(_stack_base), O1); // empty java expression stack 1789 __ ba(resume_interpreter); 1790 __ delayed()->sub(O1, wordSize, O1); // account for prepush 1791 1792 // Return from interpreted method we return result appropriate to the caller (i.e. "recursive" 1793 // interpreter call, or native) and unwind this interpreter activation. 1794 // All monitors should be unlocked. 1795 1796 __ bind(return_from_interpreted_method); 1797 1798 VALIDATE_STATE(G3_scratch, 7); 1799 1800 Label return_to_initial_caller; 1801 1802 // Interpreted result is on the top of the completed activation expression stack. 1803 // We must return it to the top of the callers stack if caller was interpreted 1804 // otherwise we convert to native abi result and return to call_stub/c1/c2 1805 // The caller's expression stack was truncated by the call however the current activation 1806 // has enough stuff on the stack that we have usable space there no matter what. The 1807 // other thing that makes it easy is that the top of the caller's stack is stored in STATE(_locals) 1808 // for the current activation 1809 1810 __ ld_ptr(STATE(_prev_link), L1_scratch); 1811 __ ld_ptr(STATE(_method), L2_scratch); // get method just executed 1812 __ ld(L2_scratch, in_bytes(Method::result_index_offset()), L2_scratch); 1813 __ tst(L1_scratch); 1814 __ brx(Assembler::zero, false, Assembler::pt, return_to_initial_caller); 1815 __ delayed()->sll(L2_scratch, LogBytesPerWord, L2_scratch); 1816 1817 // Copy result to callers java stack 1818 1819 __ set((intptr_t)CppInterpreter::_stack_to_stack, L4_scratch); 1820 __ ld_ptr(L4_scratch, L2_scratch, Lscratch); // get typed result converter address 1821 __ ld_ptr(STATE(_stack), O0); // current top (prepushed) 1822 __ ld_ptr(STATE(_locals), O1); // stack destination 1823 1824 // O0 - will be source, O1 - will be destination (preserved) 1825 __ jmpl(Lscratch, G0, O7); // and convert it 1826 __ delayed()->add(O0, wordSize, O0); // get source (top of current expr stack) 1827 1828 // O1 == &locals[0] 1829 1830 // Result is now on caller's stack. Just unwind current activation and resume 1831 1832 Label unwind_recursive_activation; 1833 1834 1835 __ bind(unwind_recursive_activation); 1836 1837 // O1 == &locals[0] (really callers stacktop) for activation now returning 1838 // returning to interpreter method from "recursive" interpreter call 1839 // result converter left O1 pointing to top of the( prepushed) java stack for method we are returning 1840 // to. Now all we must do is unwind the state from the completed call 1841 1842 // Must restore stack 1843 VALIDATE_STATE(G3_scratch, 8); 1844 1845 // Return to interpreter method after a method call (interpreted/native/c1/c2) has completed. 1846 // Result if any is already on the caller's stack. All we must do now is remove the now dead 1847 // frame and tell interpreter to resume. 1848 1849 1850 __ mov(O1, I1); // pass back new stack top across activation 1851 // POP FRAME HERE ================================== 1852 __ restore(FP, G0, SP); // unwind interpreter state frame 1853 __ ld_ptr(STATE(_frame_bottom), SP); // restore to full stack frame 1854 1855 1856 // Resume the interpreter. The current frame contains the current interpreter 1857 // state object. 1858 // 1859 // O1 == new java stack pointer 1860 1861 __ bind(resume_interpreter); 1862 VALIDATE_STATE(G3_scratch, 10); 1863 1864 // A frame we have already used before so no need to bang stack so use call_interpreter_2 entry 1865 1866 __ set((int)BytecodeInterpreter::method_resume, L1_scratch); 1867 __ st(L1_scratch, STATE(_msg)); 1868 __ ba(call_interpreter_2); 1869 __ delayed()->st_ptr(O1, STATE(_stack)); 1870 1871 1872 // Fast accessor methods share this entry point. 1873 // This works because frame manager is in the same codelet 1874 // This can either be an entry via call_stub/c1/c2 or a recursive interpreter call 1875 // we need to do a little register fixup here once we distinguish the two of them 1876 if (UseFastAccessorMethods && !synchronized) { 1877 // Call stub_return address still in O7 1878 __ bind(fast_accessor_slow_entry_path); 1879 __ set((intptr_t)return_from_native_method - 8, Gtmp1); 1880 __ cmp(Gtmp1, O7); // returning to interpreter? 1881 __ brx(Assembler::equal, true, Assembler::pt, re_dispatch); // yep 1882 __ delayed()->nop(); 1883 __ ba(re_dispatch); 1884 __ delayed()->mov(G0, prevState); // initial entry 1885 1886 } 1887 1888 // interpreter returning to native code (call_stub/c1/c2) 1889 // convert result and unwind initial activation 1890 // L2_scratch - scaled result type index 1891 1892 __ bind(return_to_initial_caller); 1893 1894 __ set((intptr_t)CppInterpreter::_stack_to_native_abi, L4_scratch); 1895 __ ld_ptr(L4_scratch, L2_scratch, Lscratch); // get typed result converter address 1896 __ ld_ptr(STATE(_stack), O0); // current top (prepushed) 1897 __ jmpl(Lscratch, G0, O7); // and convert it 1898 __ delayed()->add(O0, wordSize, O0); // get source (top of current expr stack) 1899 1900 Label unwind_initial_activation; 1901 __ bind(unwind_initial_activation); 1902 1903 // RETURN TO CALL_STUB/C1/C2 code (result if any in I0..I1/(F0/..F1) 1904 // we can return here with an exception that wasn't handled by interpreted code 1905 // how does c1/c2 see it on return? 1906 1907 // compute resulting sp before/after args popped depending upon calling convention 1908 // __ ld_ptr(STATE(_saved_sp), Gtmp1); 1909 // 1910 // POP FRAME HERE ================================== 1911 __ restore(FP, G0, SP); 1912 __ retl(); 1913 __ delayed()->mov(I5_savedSP->after_restore(), SP); 1914 1915 // OSR request, unwind the current frame and transfer to the OSR entry 1916 // and enter OSR nmethod 1917 1918 __ bind(do_OSR); 1919 Label remove_initial_frame; 1920 __ ld_ptr(STATE(_prev_link), L1_scratch); 1921 __ ld_ptr(STATE(_result._osr._osr_buf), G1_scratch); 1922 1923 // We are going to pop this frame. Is there another interpreter frame underneath 1924 // it or is it callstub/compiled? 1925 1926 __ tst(L1_scratch); 1927 __ brx(Assembler::zero, false, Assembler::pt, remove_initial_frame); 1928 __ delayed()->ld_ptr(STATE(_result._osr._osr_entry), G3_scratch); 1929 1930 // Frame underneath is an interpreter frame simply unwind 1931 // POP FRAME HERE ================================== 1932 __ restore(FP, G0, SP); // unwind interpreter state frame 1933 __ mov(I5_savedSP->after_restore(), SP); 1934 1935 // Since we are now calling native need to change our "return address" from the 1936 // dummy RecursiveInterpreterActivation to a return from native 1937 1938 __ set((intptr_t)return_from_native_method - 8, O7); 1939 1940 __ jmpl(G3_scratch, G0, G0); 1941 __ delayed()->mov(G1_scratch, O0); 1942 1943 __ bind(remove_initial_frame); 1944 1945 // POP FRAME HERE ================================== 1946 __ restore(FP, G0, SP); 1947 __ mov(I5_savedSP->after_restore(), SP); 1948 __ jmpl(G3_scratch, G0, G0); 1949 __ delayed()->mov(G1_scratch, O0); 1950 1951 // Call a new method. All we do is (temporarily) trim the expression stack 1952 // push a return address to bring us back to here and leap to the new entry. 1953 // At this point we have a topmost frame that was allocated by the frame manager 1954 // which contains the current method interpreted state. We trim this frame 1955 // of excess java expression stack entries and then recurse. 1956 1957 __ bind(call_method); 1958 1959 // stack points to next free location and not top element on expression stack 1960 // method expects sp to be pointing to topmost element 1961 1962 __ ld_ptr(STATE(_thread), G2_thread); 1963 __ ld_ptr(STATE(_result._to_call._callee), G5_method); 1964 1965 1966 // SP already takes in to account the 2 extra words we use for slop 1967 // when we call a "static long no_params()" method. So if 1968 // we trim back sp by the amount of unused java expression stack 1969 // there will be automagically the 2 extra words we need. 1970 // We also have to worry about keeping SP aligned. 1971 1972 __ ld_ptr(STATE(_stack), Gargs); 1973 __ ld_ptr(STATE(_stack_limit), L1_scratch); 1974 1975 // compute the unused java stack size 1976 __ sub(Gargs, L1_scratch, L2_scratch); // compute unused space 1977 1978 // Round down the unused space to that stack is always 16-byte aligned 1979 // by making the unused space a multiple of the size of two longs. 1980 1981 __ and3(L2_scratch, -2*BytesPerLong, L2_scratch); 1982 1983 // Now trim the stack 1984 __ add(SP, L2_scratch, SP); 1985 1986 1987 // Now point to the final argument (account for prepush) 1988 __ add(Gargs, wordSize, Gargs); 1989 #ifdef ASSERT 1990 // Make sure we have space for the window 1991 __ sub(Gargs, SP, L1_scratch); 1992 __ cmp(L1_scratch, 16*wordSize); 1993 { 1994 Label skip; 1995 __ brx(Assembler::greaterEqual, false, Assembler::pt, skip); 1996 __ delayed()->nop(); 1997 __ stop("killed stack"); 1998 __ bind(skip); 1999 } 2000 #endif // ASSERT 2001 2002 // Create a new frame where we can store values that make it look like the interpreter 2003 // really recursed. 2004 2005 // prepare to recurse or call specialized entry 2006 2007 // First link the registers we need 2008 2009 // make the pc look good in debugger 2010 __ set(CAST_FROM_FN_PTR(intptr_t, RecursiveInterpreterActivation), O7); 2011 // argument too 2012 __ mov(Lstate, I0); 2013 2014 // Record our sending SP 2015 __ mov(SP, O5_savedSP); 2016 2017 __ ld_ptr(STATE(_result._to_call._callee_entry_point), L2_scratch); 2018 __ set((intptr_t) entry_point, L1_scratch); 2019 __ cmp(L1_scratch, L2_scratch); 2020 __ brx(Assembler::equal, false, Assembler::pt, re_dispatch); 2021 __ delayed()->mov(Lstate, prevState); // link activations 2022 2023 // method uses specialized entry, push a return so we look like call stub setup 2024 // this path will handle fact that result is returned in registers and not 2025 // on the java stack. 2026 2027 __ set((intptr_t)return_from_native_method - 8, O7); 2028 __ jmpl(L2_scratch, G0, G0); // Do specialized entry 2029 __ delayed()->nop(); 2030 2031 // 2032 // Bad Message from interpreter 2033 // 2034 __ bind(bad_msg); 2035 __ stop("Bad message from interpreter"); 2036 2037 // Interpreted method "returned" with an exception pass it on... 2038 // Pass result, unwind activation and continue/return to interpreter/call_stub 2039 // We handle result (if any) differently based on return to interpreter or call_stub 2040 2041 __ bind(throw_exception); 2042 __ ld_ptr(STATE(_prev_link), L1_scratch); 2043 __ tst(L1_scratch); 2044 __ brx(Assembler::zero, false, Assembler::pt, unwind_and_forward); 2045 __ delayed()->nop(); 2046 2047 __ ld_ptr(STATE(_locals), O1); // get result of popping callee's args 2048 __ ba(unwind_recursive_activation); 2049 __ delayed()->nop(); 2050 2051 interpreter_frame_manager = entry_point; 2052 return entry_point; 2053 } 2054 2055 InterpreterGenerator::InterpreterGenerator(StubQueue* code) 2056 : CppInterpreterGenerator(code) { 2057 generate_all(); // down here so it can be "virtual" 2058 } 2059 2060 2061 static int size_activation_helper(int callee_extra_locals, int max_stack, int monitor_size) { 2062 2063 // Figure out the size of an interpreter frame (in words) given that we have a fully allocated 2064 // expression stack, the callee will have callee_extra_locals (so we can account for 2065 // frame extension) and monitor_size for monitors. Basically we need to calculate 2066 // this exactly like generate_fixed_frame/generate_compute_interpreter_state. 2067 // 2068 // 2069 // The big complicating thing here is that we must ensure that the stack stays properly 2070 // aligned. This would be even uglier if monitor size wasn't modulo what the stack 2071 // needs to be aligned for). We are given that the sp (fp) is already aligned by 2072 // the caller so we must ensure that it is properly aligned for our callee. 2073 // 2074 // Ths c++ interpreter always makes sure that we have a enough extra space on the 2075 // stack at all times to deal with the "stack long no_params()" method issue. This 2076 // is "slop_factor" here. 2077 const int slop_factor = 2; 2078 2079 const int fixed_size = sizeof(BytecodeInterpreter)/wordSize + // interpreter state object 2080 frame::memory_parameter_word_sp_offset; // register save area + param window 2081 const int extra_stack = 0; //6815692//Method::extra_stack_entries(); 2082 return (round_to(max_stack + 2083 extra_stack + 2084 slop_factor + 2085 fixed_size + 2086 monitor_size + 2087 (callee_extra_locals * Interpreter::stackElementWords), WordsPerLong)); 2088 2089 } 2090 2091 int AbstractInterpreter::size_top_interpreter_activation(Method* method) { 2092 2093 // See call_stub code 2094 int call_stub_size = round_to(7 + frame::memory_parameter_word_sp_offset, 2095 WordsPerLong); // 7 + register save area 2096 2097 // Save space for one monitor to get into the interpreted method in case 2098 // the method is synchronized 2099 int monitor_size = method->is_synchronized() ? 2100 1*frame::interpreter_frame_monitor_size() : 0; 2101 return size_activation_helper(method->max_locals(), method->max_stack(), 2102 monitor_size) + call_stub_size; 2103 } 2104 2105 void BytecodeInterpreter::layout_interpreterState(interpreterState to_fill, 2106 frame* caller, 2107 frame* current, 2108 Method* method, 2109 intptr_t* locals, 2110 intptr_t* stack, 2111 intptr_t* stack_base, 2112 intptr_t* monitor_base, 2113 intptr_t* frame_bottom, 2114 bool is_top_frame 2115 ) 2116 { 2117 // What about any vtable? 2118 // 2119 to_fill->_thread = JavaThread::current(); 2120 // This gets filled in later but make it something recognizable for now 2121 to_fill->_bcp = method->code_base(); 2122 to_fill->_locals = locals; 2123 to_fill->_constants = method->constants()->cache(); 2124 to_fill->_method = method; 2125 to_fill->_mdx = NULL; 2126 to_fill->_stack = stack; 2127 if (is_top_frame && JavaThread::current()->popframe_forcing_deopt_reexecution() ) { 2128 to_fill->_msg = deopt_resume2; 2129 } else { 2130 to_fill->_msg = method_resume; 2131 } 2132 to_fill->_result._to_call._bcp_advance = 0; 2133 to_fill->_result._to_call._callee_entry_point = NULL; // doesn't matter to anyone 2134 to_fill->_result._to_call._callee = NULL; // doesn't matter to anyone 2135 to_fill->_prev_link = NULL; 2136 2137 // Fill in the registers for the frame 2138 2139 // Need to install _sender_sp. Actually not too hard in C++! 2140 // When the skeletal frames are layed out we fill in a value 2141 // for _sender_sp. That value is only correct for the oldest 2142 // skeletal frame constructed (because there is only a single 2143 // entry for "caller_adjustment". While the skeletal frames 2144 // exist that is good enough. We correct that calculation 2145 // here and get all the frames correct. 2146 2147 // to_fill->_sender_sp = locals - (method->size_of_parameters() - 1); 2148 2149 *current->register_addr(Lstate) = (intptr_t) to_fill; 2150 // skeletal already places a useful value here and this doesn't account 2151 // for alignment so don't bother. 2152 // *current->register_addr(I5_savedSP) = (intptr_t) locals - (method->size_of_parameters() - 1); 2153 2154 if (caller->is_interpreted_frame()) { 2155 interpreterState prev = caller->get_interpreterState(); 2156 to_fill->_prev_link = prev; 2157 // Make the prev callee look proper 2158 prev->_result._to_call._callee = method; 2159 if (*prev->_bcp == Bytecodes::_invokeinterface) { 2160 prev->_result._to_call._bcp_advance = 5; 2161 } else { 2162 prev->_result._to_call._bcp_advance = 3; 2163 } 2164 } 2165 to_fill->_oop_temp = NULL; 2166 to_fill->_stack_base = stack_base; 2167 // Need +1 here because stack_base points to the word just above the first expr stack entry 2168 // and stack_limit is supposed to point to the word just below the last expr stack entry. 2169 // See generate_compute_interpreter_state. 2170 int extra_stack = 0; //6815692//Method::extra_stack_entries(); 2171 to_fill->_stack_limit = stack_base - (method->max_stack() + 1 + extra_stack); 2172 to_fill->_monitor_base = (BasicObjectLock*) monitor_base; 2173 2174 // sparc specific 2175 to_fill->_frame_bottom = frame_bottom; 2176 to_fill->_self_link = to_fill; 2177 #ifdef ASSERT 2178 to_fill->_native_fresult = 123456.789; 2179 to_fill->_native_lresult = CONST64(0xdeadcafedeafcafe); 2180 #endif 2181 } 2182 2183 void BytecodeInterpreter::pd_layout_interpreterState(interpreterState istate, address last_Java_pc, intptr_t* last_Java_fp) { 2184 istate->_last_Java_pc = (intptr_t*) last_Java_pc; 2185 } 2186 2187 2188 int AbstractInterpreter::layout_activation(Method* method, 2189 int tempcount, // Number of slots on java expression stack in use 2190 int popframe_extra_args, 2191 int moncount, // Number of active monitors 2192 int caller_actual_parameters, 2193 int callee_param_size, 2194 int callee_locals_size, 2195 frame* caller, 2196 frame* interpreter_frame, 2197 bool is_top_frame, 2198 bool is_bottom_frame) { 2199 2200 assert(popframe_extra_args == 0, "NEED TO FIX"); 2201 // NOTE this code must exactly mimic what InterpreterGenerator::generate_compute_interpreter_state() 2202 // does as far as allocating an interpreter frame. 2203 // If interpreter_frame!=NULL, set up the method, locals, and monitors. 2204 // The frame interpreter_frame, if not NULL, is guaranteed to be the right size, 2205 // as determined by a previous call to this method. 2206 // It is also guaranteed to be walkable even though it is in a skeletal state 2207 // NOTE: return size is in words not bytes 2208 // NOTE: tempcount is the current size of the java expression stack. For top most 2209 // frames we will allocate a full sized expression stack and not the curback 2210 // version that non-top frames have. 2211 2212 // Calculate the amount our frame will be adjust by the callee. For top frame 2213 // this is zero. 2214 2215 // NOTE: ia64 seems to do this wrong (or at least backwards) in that it 2216 // calculates the extra locals based on itself. Not what the callee does 2217 // to it. So it ignores last_frame_adjust value. Seems suspicious as far 2218 // as getting sender_sp correct. 2219 2220 int extra_locals_size = callee_locals_size - callee_param_size; 2221 int monitor_size = (sizeof(BasicObjectLock) * moncount) / wordSize; 2222 int full_frame_words = size_activation_helper(extra_locals_size, method->max_stack(), monitor_size); 2223 int short_frame_words = size_activation_helper(extra_locals_size, method->max_stack(), monitor_size); 2224 int frame_words = is_top_frame ? full_frame_words : short_frame_words; 2225 2226 2227 /* 2228 if we actually have a frame to layout we must now fill in all the pieces. This means both 2229 the interpreterState and the registers. 2230 */ 2231 if (interpreter_frame != NULL) { 2232 2233 // MUCHO HACK 2234 2235 intptr_t* frame_bottom = interpreter_frame->sp() - (full_frame_words - frame_words); 2236 // 'interpreter_frame->sp()' is unbiased while 'frame_bottom' must be a biased value in 64bit mode. 2237 assert(((intptr_t)frame_bottom & 0xf) == 0, "SP biased in layout_activation"); 2238 frame_bottom = (intptr_t*)((intptr_t)frame_bottom - STACK_BIAS); 2239 2240 /* Now fillin the interpreterState object */ 2241 2242 interpreterState cur_state = (interpreterState) ((intptr_t)interpreter_frame->fp() - sizeof(BytecodeInterpreter)); 2243 2244 2245 intptr_t* locals; 2246 2247 // Calculate the postion of locals[0]. This is painful because of 2248 // stack alignment (same as ia64). The problem is that we can 2249 // not compute the location of locals from fp(). fp() will account 2250 // for the extra locals but it also accounts for aligning the stack 2251 // and we can't determine if the locals[0] was misaligned but max_locals 2252 // was enough to have the 2253 // calculate postion of locals. fp already accounts for extra locals. 2254 // +2 for the static long no_params() issue. 2255 2256 if (caller->is_interpreted_frame()) { 2257 // locals must agree with the caller because it will be used to set the 2258 // caller's tos when we return. 2259 interpreterState prev = caller->get_interpreterState(); 2260 // stack() is prepushed. 2261 locals = prev->stack() + method->size_of_parameters(); 2262 } else { 2263 // Lay out locals block in the caller adjacent to the register window save area. 2264 // 2265 // Compiled frames do not allocate a varargs area which is why this if 2266 // statement is needed. 2267 // 2268 intptr_t* fp = interpreter_frame->fp(); 2269 int local_words = method->max_locals() * Interpreter::stackElementWords; 2270 2271 if (caller->is_compiled_frame()) { 2272 locals = fp + frame::register_save_words + local_words - 1; 2273 } else { 2274 locals = fp + frame::memory_parameter_word_sp_offset + local_words - 1; 2275 } 2276 2277 } 2278 // END MUCHO HACK 2279 2280 intptr_t* monitor_base = (intptr_t*) cur_state; 2281 intptr_t* stack_base = monitor_base - monitor_size; 2282 /* +1 because stack is always prepushed */ 2283 intptr_t* stack = stack_base - (tempcount + 1); 2284 2285 2286 BytecodeInterpreter::layout_interpreterState(cur_state, 2287 caller, 2288 interpreter_frame, 2289 method, 2290 locals, 2291 stack, 2292 stack_base, 2293 monitor_base, 2294 frame_bottom, 2295 is_top_frame); 2296 2297 BytecodeInterpreter::pd_layout_interpreterState(cur_state, interpreter_return_address, interpreter_frame->fp()); 2298 2299 } 2300 return frame_words; 2301 } 2302 2303 #endif // CC_INTERP