1 /* 2 * Copyright (c) 1997, 2013, Oracle and/or its affiliates. All rights reserved. 3 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. 4 * 5 * This code is free software; you can redistribute it and/or modify it 6 * under the terms of the GNU General Public License version 2 only, as 7 * published by the Free Software Foundation. 8 * 9 * This code is distributed in the hope that it will be useful, but WITHOUT 10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License 12 * version 2 for more details (a copy is included in the LICENSE file that 13 * accompanied this code). 14 * 15 * You should have received a copy of the GNU General Public License version 16 * 2 along with this work; if not, write to the Free Software Foundation, 17 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. 18 * 19 * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA 20 * or visit www.oracle.com if you need additional information or have any 21 * questions. 22 * 23 */ 24 25 #include "precompiled.hpp" 26 #include "asm/macroAssembler.hpp" 27 #include "interpreter/bytecodeHistogram.hpp" 28 #include "interpreter/interpreter.hpp" 29 #include "interpreter/interpreterGenerator.hpp" 30 #include "interpreter/interpreterRuntime.hpp" 31 #include "interpreter/templateTable.hpp" 32 #include "oops/arrayOop.hpp" 33 #include "oops/methodData.hpp" 34 #include "oops/method.hpp" 35 #include "oops/oop.inline.hpp" 36 #include "prims/jvmtiExport.hpp" 37 #include "prims/jvmtiThreadState.hpp" 38 #include "runtime/arguments.hpp" 39 #include "runtime/deoptimization.hpp" 40 #include "runtime/frame.inline.hpp" 41 #include "runtime/sharedRuntime.hpp" 42 #include "runtime/stubRoutines.hpp" 43 #include "runtime/synchronizer.hpp" 44 #include "runtime/timer.hpp" 45 #include "runtime/vframeArray.hpp" 46 #include "utilities/debug.hpp" 47 #include "utilities/macros.hpp" 48 49 #define __ _masm-> 50 51 52 #ifndef CC_INTERP 53 const int method_offset = frame::interpreter_frame_method_offset * wordSize; 54 const int bci_offset = frame::interpreter_frame_bcx_offset * wordSize; 55 const int locals_offset = frame::interpreter_frame_locals_offset * wordSize; 56 57 //------------------------------------------------------------------------------------------------------------------------ 58 59 address TemplateInterpreterGenerator::generate_StackOverflowError_handler() { 60 address entry = __ pc(); 61 62 // Note: There should be a minimal interpreter frame set up when stack 63 // overflow occurs since we check explicitly for it now. 64 // 65 #ifdef ASSERT 66 { Label L; 67 __ lea(rax, Address(rbp, 68 frame::interpreter_frame_monitor_block_top_offset * wordSize)); 69 __ cmpptr(rax, rsp); // rax, = maximal rsp for current rbp, 70 // (stack grows negative) 71 __ jcc(Assembler::aboveEqual, L); // check if frame is complete 72 __ stop ("interpreter frame not set up"); 73 __ bind(L); 74 } 75 #endif // ASSERT 76 // Restore bcp under the assumption that the current frame is still 77 // interpreted 78 __ restore_bcp(); 79 80 // expression stack must be empty before entering the VM if an exception 81 // happened 82 __ empty_expression_stack(); 83 __ empty_FPU_stack(); 84 // throw exception 85 __ call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::throw_StackOverflowError)); 86 return entry; 87 } 88 89 address TemplateInterpreterGenerator::generate_ArrayIndexOutOfBounds_handler(const char* name) { 90 address entry = __ pc(); 91 // expression stack must be empty before entering the VM if an exception happened 92 __ empty_expression_stack(); 93 __ empty_FPU_stack(); 94 // setup parameters 95 // ??? convention: expect aberrant index in register rbx, 96 __ lea(rax, ExternalAddress((address)name)); 97 __ call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::throw_ArrayIndexOutOfBoundsException), rax, rbx); 98 return entry; 99 } 100 101 address TemplateInterpreterGenerator::generate_ClassCastException_handler() { 102 address entry = __ pc(); 103 // object is at TOS 104 __ pop(rax); 105 // expression stack must be empty before entering the VM if an exception 106 // happened 107 __ empty_expression_stack(); 108 __ empty_FPU_stack(); 109 __ call_VM(noreg, 110 CAST_FROM_FN_PTR(address, 111 InterpreterRuntime::throw_ClassCastException), 112 rax); 113 return entry; 114 } 115 116 address TemplateInterpreterGenerator::generate_exception_handler_common(const char* name, const char* message, bool pass_oop) { 117 assert(!pass_oop || message == NULL, "either oop or message but not both"); 118 address entry = __ pc(); 119 if (pass_oop) { 120 // object is at TOS 121 __ pop(rbx); 122 } 123 // expression stack must be empty before entering the VM if an exception happened 124 __ empty_expression_stack(); 125 __ empty_FPU_stack(); 126 // setup parameters 127 __ lea(rax, ExternalAddress((address)name)); 128 if (pass_oop) { 129 __ call_VM(rax, CAST_FROM_FN_PTR(address, InterpreterRuntime::create_klass_exception), rax, rbx); 130 } else { 131 if (message != NULL) { 132 __ lea(rbx, ExternalAddress((address)message)); 133 } else { 134 __ movptr(rbx, NULL_WORD); 135 } 136 __ call_VM(rax, CAST_FROM_FN_PTR(address, InterpreterRuntime::create_exception), rax, rbx); 137 } 138 // throw exception 139 __ jump(ExternalAddress(Interpreter::throw_exception_entry())); 140 return entry; 141 } 142 143 144 address TemplateInterpreterGenerator::generate_continuation_for(TosState state) { 145 address entry = __ pc(); 146 // NULL last_sp until next java call 147 __ movptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), NULL_WORD); 148 __ dispatch_next(state); 149 return entry; 150 } 151 152 153 address TemplateInterpreterGenerator::generate_return_entry_for(TosState state, int step) { 154 TosState incoming_state = state; 155 address entry = __ pc(); 156 157 #ifdef COMPILER2 158 // The FPU stack is clean if UseSSE >= 2 but must be cleaned in other cases 159 if ((incoming_state == ftos && UseSSE < 1) || (incoming_state == dtos && UseSSE < 2)) { 160 for (int i = 1; i < 8; i++) { 161 __ ffree(i); 162 } 163 } else if (UseSSE < 2) { 164 __ empty_FPU_stack(); 165 } 166 #endif 167 if ((incoming_state == ftos && UseSSE < 1) || (incoming_state == dtos && UseSSE < 2)) { 168 __ MacroAssembler::verify_FPU(1, "generate_return_entry_for compiled"); 169 } else { 170 __ MacroAssembler::verify_FPU(0, "generate_return_entry_for compiled"); 171 } 172 173 // In SSE mode, interpreter returns FP results in xmm0 but they need 174 // to end up back on the FPU so it can operate on them. 175 if (incoming_state == ftos && UseSSE >= 1) { 176 __ subptr(rsp, wordSize); 177 __ movflt(Address(rsp, 0), xmm0); 178 __ fld_s(Address(rsp, 0)); 179 __ addptr(rsp, wordSize); 180 } else if (incoming_state == dtos && UseSSE >= 2) { 181 __ subptr(rsp, 2*wordSize); 182 __ movdbl(Address(rsp, 0), xmm0); 183 __ fld_d(Address(rsp, 0)); 184 __ addptr(rsp, 2*wordSize); 185 } 186 187 __ MacroAssembler::verify_FPU(state == ftos || state == dtos ? 1 : 0, "generate_return_entry_for in interpreter"); 188 189 // Restore stack bottom in case i2c adjusted stack 190 __ movptr(rsp, Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize)); 191 // and NULL it as marker that rsp is now tos until next java call 192 __ movptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), NULL_WORD); 193 194 __ restore_bcp(); 195 __ restore_locals(); 196 197 if (incoming_state == atos) { 198 Register mdp = rbx; 199 Register tmp = rcx; 200 __ profile_return_type(mdp, rax, tmp); 201 } 202 203 Label L_got_cache, L_giant_index; 204 if (EnableInvokeDynamic) { 205 __ cmpb(Address(rsi, 0), Bytecodes::_invokedynamic); 206 __ jcc(Assembler::equal, L_giant_index); 207 } 208 __ get_cache_and_index_at_bcp(rbx, rcx, 1, sizeof(u2)); 209 __ bind(L_got_cache); 210 __ movl(rbx, Address(rbx, rcx, 211 Address::times_ptr, ConstantPoolCache::base_offset() + 212 ConstantPoolCacheEntry::flags_offset())); 213 __ andptr(rbx, 0xFF); 214 __ lea(rsp, Address(rsp, rbx, Interpreter::stackElementScale())); 215 __ dispatch_next(state, step); 216 217 // out of the main line of code... 218 if (EnableInvokeDynamic) { 219 __ bind(L_giant_index); 220 __ get_cache_and_index_at_bcp(rbx, rcx, 1, sizeof(u4)); 221 __ jmp(L_got_cache); 222 } 223 224 return entry; 225 } 226 227 228 address TemplateInterpreterGenerator::generate_deopt_entry_for(TosState state, int step) { 229 address entry = __ pc(); 230 231 // In SSE mode, FP results are in xmm0 232 if (state == ftos && UseSSE > 0) { 233 __ subptr(rsp, wordSize); 234 __ movflt(Address(rsp, 0), xmm0); 235 __ fld_s(Address(rsp, 0)); 236 __ addptr(rsp, wordSize); 237 } else if (state == dtos && UseSSE >= 2) { 238 __ subptr(rsp, 2*wordSize); 239 __ movdbl(Address(rsp, 0), xmm0); 240 __ fld_d(Address(rsp, 0)); 241 __ addptr(rsp, 2*wordSize); 242 } 243 244 __ MacroAssembler::verify_FPU(state == ftos || state == dtos ? 1 : 0, "generate_deopt_entry_for in interpreter"); 245 246 // The stack is not extended by deopt but we must NULL last_sp as this 247 // entry is like a "return". 248 __ movptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), NULL_WORD); 249 __ restore_bcp(); 250 __ restore_locals(); 251 // handle exceptions 252 { Label L; 253 const Register thread = rcx; 254 __ get_thread(thread); 255 __ cmpptr(Address(thread, Thread::pending_exception_offset()), (int32_t)NULL_WORD); 256 __ jcc(Assembler::zero, L); 257 __ call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::throw_pending_exception)); 258 __ should_not_reach_here(); 259 __ bind(L); 260 } 261 __ dispatch_next(state, step); 262 return entry; 263 } 264 265 266 int AbstractInterpreter::BasicType_as_index(BasicType type) { 267 int i = 0; 268 switch (type) { 269 case T_BOOLEAN: i = 0; break; 270 case T_CHAR : i = 1; break; 271 case T_BYTE : i = 2; break; 272 case T_SHORT : i = 3; break; 273 case T_INT : // fall through 274 case T_LONG : // fall through 275 case T_VOID : i = 4; break; 276 case T_FLOAT : i = 5; break; // have to treat float and double separately for SSE 277 case T_DOUBLE : i = 6; break; 278 case T_OBJECT : // fall through 279 case T_ARRAY : i = 7; break; 280 default : ShouldNotReachHere(); 281 } 282 assert(0 <= i && i < AbstractInterpreter::number_of_result_handlers, "index out of bounds"); 283 return i; 284 } 285 286 287 address TemplateInterpreterGenerator::generate_result_handler_for(BasicType type) { 288 address entry = __ pc(); 289 switch (type) { 290 case T_BOOLEAN: __ c2bool(rax); break; 291 case T_CHAR : __ andptr(rax, 0xFFFF); break; 292 case T_BYTE : __ sign_extend_byte (rax); break; 293 case T_SHORT : __ sign_extend_short(rax); break; 294 case T_INT : /* nothing to do */ break; 295 case T_DOUBLE : 296 case T_FLOAT : 297 { const Register t = InterpreterRuntime::SignatureHandlerGenerator::temp(); 298 __ pop(t); // remove return address first 299 // Must return a result for interpreter or compiler. In SSE 300 // mode, results are returned in xmm0 and the FPU stack must 301 // be empty. 302 if (type == T_FLOAT && UseSSE >= 1) { 303 // Load ST0 304 __ fld_d(Address(rsp, 0)); 305 // Store as float and empty fpu stack 306 __ fstp_s(Address(rsp, 0)); 307 // and reload 308 __ movflt(xmm0, Address(rsp, 0)); 309 } else if (type == T_DOUBLE && UseSSE >= 2 ) { 310 __ movdbl(xmm0, Address(rsp, 0)); 311 } else { 312 // restore ST0 313 __ fld_d(Address(rsp, 0)); 314 } 315 // and pop the temp 316 __ addptr(rsp, 2 * wordSize); 317 __ push(t); // restore return address 318 } 319 break; 320 case T_OBJECT : 321 // retrieve result from frame 322 __ movptr(rax, Address(rbp, frame::interpreter_frame_oop_temp_offset*wordSize)); 323 // and verify it 324 __ verify_oop(rax); 325 break; 326 default : ShouldNotReachHere(); 327 } 328 __ ret(0); // return from result handler 329 return entry; 330 } 331 332 address TemplateInterpreterGenerator::generate_safept_entry_for(TosState state, address runtime_entry) { 333 address entry = __ pc(); 334 __ push(state); 335 __ call_VM(noreg, runtime_entry); 336 __ dispatch_via(vtos, Interpreter::_normal_table.table_for(vtos)); 337 return entry; 338 } 339 340 341 // Helpers for commoning out cases in the various type of method entries. 342 // 343 344 // increment invocation count & check for overflow 345 // 346 // Note: checking for negative value instead of overflow 347 // so we have a 'sticky' overflow test 348 // 349 // rbx,: method 350 // rcx: invocation counter 351 // 352 void InterpreterGenerator::generate_counter_incr(Label* overflow, Label* profile_method, Label* profile_method_continue) { 353 Label done; 354 // Note: In tiered we increment either counters in MethodCounters* or in MDO 355 // depending if we're profiling or not. 356 if (TieredCompilation) { 357 int increment = InvocationCounter::count_increment; 358 int mask = ((1 << Tier0InvokeNotifyFreqLog) - 1) << InvocationCounter::count_shift; 359 Label no_mdo; 360 if (ProfileInterpreter) { 361 // Are we profiling? 362 __ movptr(rax, Address(rbx, Method::method_data_offset())); 363 __ testptr(rax, rax); 364 __ jccb(Assembler::zero, no_mdo); 365 // Increment counter in the MDO 366 const Address mdo_invocation_counter(rax, in_bytes(MethodData::invocation_counter_offset()) + 367 in_bytes(InvocationCounter::counter_offset())); 368 __ increment_mask_and_jump(mdo_invocation_counter, increment, mask, rcx, false, Assembler::zero, overflow); 369 __ jmp(done); 370 } 371 __ bind(no_mdo); 372 // Increment counter in MethodCounters 373 const Address invocation_counter(rax, 374 MethodCounters::invocation_counter_offset() + 375 InvocationCounter::counter_offset()); 376 377 __ get_method_counters(rbx, rax, done); 378 __ increment_mask_and_jump(invocation_counter, increment, mask, 379 rcx, false, Assembler::zero, overflow); 380 __ bind(done); 381 } else { 382 const Address backedge_counter (rax, 383 MethodCounters::backedge_counter_offset() + 384 InvocationCounter::counter_offset()); 385 const Address invocation_counter(rax, 386 MethodCounters::invocation_counter_offset() + 387 InvocationCounter::counter_offset()); 388 389 __ get_method_counters(rbx, rax, done); 390 391 if (ProfileInterpreter) { 392 __ incrementl(Address(rax, 393 MethodCounters::interpreter_invocation_counter_offset())); 394 } 395 396 // Update standard invocation counters 397 __ movl(rcx, invocation_counter); 398 __ incrementl(rcx, InvocationCounter::count_increment); 399 __ movl(invocation_counter, rcx); // save invocation count 400 401 __ movl(rax, backedge_counter); // load backedge counter 402 __ andl(rax, InvocationCounter::count_mask_value); // mask out the status bits 403 404 __ addl(rcx, rax); // add both counters 405 406 // profile_method is non-null only for interpreted method so 407 // profile_method != NULL == !native_call 408 // BytecodeInterpreter only calls for native so code is elided. 409 410 if (ProfileInterpreter && profile_method != NULL) { 411 // Test to see if we should create a method data oop 412 __ cmp32(rcx, 413 ExternalAddress((address)&InvocationCounter::InterpreterProfileLimit)); 414 __ jcc(Assembler::less, *profile_method_continue); 415 416 // if no method data exists, go to profile_method 417 __ test_method_data_pointer(rax, *profile_method); 418 } 419 420 __ cmp32(rcx, 421 ExternalAddress((address)&InvocationCounter::InterpreterInvocationLimit)); 422 __ jcc(Assembler::aboveEqual, *overflow); 423 __ bind(done); 424 } 425 } 426 427 void InterpreterGenerator::generate_counter_overflow(Label* do_continue) { 428 429 // Asm interpreter on entry 430 // rdi - locals 431 // rsi - bcp 432 // rbx, - method 433 // rdx - cpool 434 // rbp, - interpreter frame 435 436 // C++ interpreter on entry 437 // rsi - new interpreter state pointer 438 // rbp - interpreter frame pointer 439 // rbx - method 440 441 // On return (i.e. jump to entry_point) [ back to invocation of interpreter ] 442 // rbx, - method 443 // rcx - rcvr (assuming there is one) 444 // top of stack return address of interpreter caller 445 // rsp - sender_sp 446 447 // C++ interpreter only 448 // rsi - previous interpreter state pointer 449 450 // InterpreterRuntime::frequency_counter_overflow takes one argument 451 // indicating if the counter overflow occurs at a backwards branch (non-NULL bcp). 452 // The call returns the address of the verified entry point for the method or NULL 453 // if the compilation did not complete (either went background or bailed out). 454 __ movptr(rax, (intptr_t)false); 455 __ call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::frequency_counter_overflow), rax); 456 457 __ movptr(rbx, Address(rbp, method_offset)); // restore Method* 458 459 // Preserve invariant that rsi/rdi contain bcp/locals of sender frame 460 // and jump to the interpreted entry. 461 __ jmp(*do_continue, relocInfo::none); 462 463 } 464 465 void InterpreterGenerator::generate_stack_overflow_check(void) { 466 // see if we've got enough room on the stack for locals plus overhead. 467 // the expression stack grows down incrementally, so the normal guard 468 // page mechanism will work for that. 469 // 470 // Registers live on entry: 471 // 472 // Asm interpreter 473 // rdx: number of additional locals this frame needs (what we must check) 474 // rbx,: Method* 475 476 // destroyed on exit 477 // rax, 478 479 // NOTE: since the additional locals are also always pushed (wasn't obvious in 480 // generate_method_entry) so the guard should work for them too. 481 // 482 483 // monitor entry size: see picture of stack set (generate_method_entry) and frame_x86.hpp 484 const int entry_size = frame::interpreter_frame_monitor_size() * wordSize; 485 486 // total overhead size: entry_size + (saved rbp, thru expr stack bottom). 487 // be sure to change this if you add/subtract anything to/from the overhead area 488 const int overhead_size = -(frame::interpreter_frame_initial_sp_offset*wordSize) + entry_size; 489 490 const int page_size = os::vm_page_size(); 491 492 Label after_frame_check; 493 494 // see if the frame is greater than one page in size. If so, 495 // then we need to verify there is enough stack space remaining 496 // for the additional locals. 497 __ cmpl(rdx, (page_size - overhead_size)/Interpreter::stackElementSize); 498 __ jcc(Assembler::belowEqual, after_frame_check); 499 500 // compute rsp as if this were going to be the last frame on 501 // the stack before the red zone 502 503 Label after_frame_check_pop; 504 505 __ push(rsi); 506 507 const Register thread = rsi; 508 509 __ get_thread(thread); 510 511 const Address stack_base(thread, Thread::stack_base_offset()); 512 const Address stack_size(thread, Thread::stack_size_offset()); 513 514 // locals + overhead, in bytes 515 __ lea(rax, Address(noreg, rdx, Interpreter::stackElementScale(), overhead_size)); 516 517 #ifdef ASSERT 518 Label stack_base_okay, stack_size_okay; 519 // verify that thread stack base is non-zero 520 __ cmpptr(stack_base, (int32_t)NULL_WORD); 521 __ jcc(Assembler::notEqual, stack_base_okay); 522 __ stop("stack base is zero"); 523 __ bind(stack_base_okay); 524 // verify that thread stack size is non-zero 525 __ cmpptr(stack_size, 0); 526 __ jcc(Assembler::notEqual, stack_size_okay); 527 __ stop("stack size is zero"); 528 __ bind(stack_size_okay); 529 #endif 530 531 // Add stack base to locals and subtract stack size 532 __ addptr(rax, stack_base); 533 __ subptr(rax, stack_size); 534 535 // Use the maximum number of pages we might bang. 536 const int max_pages = StackShadowPages > (StackRedPages+StackYellowPages) ? StackShadowPages : 537 (StackRedPages+StackYellowPages); 538 __ addptr(rax, max_pages * page_size); 539 540 // check against the current stack bottom 541 __ cmpptr(rsp, rax); 542 __ jcc(Assembler::above, after_frame_check_pop); 543 544 __ pop(rsi); // get saved bcp / (c++ prev state ). 545 546 // Restore sender's sp as SP. This is necessary if the sender's 547 // frame is an extended compiled frame (see gen_c2i_adapter()) 548 // and safer anyway in case of JSR292 adaptations. 549 550 __ pop(rax); // return address must be moved if SP is changed 551 __ mov(rsp, rsi); 552 __ push(rax); 553 554 // Note: the restored frame is not necessarily interpreted. 555 // Use the shared runtime version of the StackOverflowError. 556 assert(StubRoutines::throw_StackOverflowError_entry() != NULL, "stub not yet generated"); 557 __ jump(ExternalAddress(StubRoutines::throw_StackOverflowError_entry())); 558 // all done with frame size check 559 __ bind(after_frame_check_pop); 560 __ pop(rsi); 561 562 __ bind(after_frame_check); 563 } 564 565 // Allocate monitor and lock method (asm interpreter) 566 // rbx, - Method* 567 // 568 void InterpreterGenerator::lock_method(void) { 569 // synchronize method 570 const Address access_flags (rbx, Method::access_flags_offset()); 571 const Address monitor_block_top (rbp, frame::interpreter_frame_monitor_block_top_offset * wordSize); 572 const int entry_size = frame::interpreter_frame_monitor_size() * wordSize; 573 574 #ifdef ASSERT 575 { Label L; 576 __ movl(rax, access_flags); 577 __ testl(rax, JVM_ACC_SYNCHRONIZED); 578 __ jcc(Assembler::notZero, L); 579 __ stop("method doesn't need synchronization"); 580 __ bind(L); 581 } 582 #endif // ASSERT 583 // get synchronization object 584 { Label done; 585 const int mirror_offset = in_bytes(Klass::java_mirror_offset()); 586 __ movl(rax, access_flags); 587 __ testl(rax, JVM_ACC_STATIC); 588 __ movptr(rax, Address(rdi, Interpreter::local_offset_in_bytes(0))); // get receiver (assume this is frequent case) 589 __ jcc(Assembler::zero, done); 590 __ movptr(rax, Address(rbx, Method::const_offset())); 591 __ movptr(rax, Address(rax, ConstMethod::constants_offset())); 592 __ movptr(rax, Address(rax, ConstantPool::pool_holder_offset_in_bytes())); 593 __ movptr(rax, Address(rax, mirror_offset)); 594 __ bind(done); 595 } 596 // add space for monitor & lock 597 __ subptr(rsp, entry_size); // add space for a monitor entry 598 __ movptr(monitor_block_top, rsp); // set new monitor block top 599 __ movptr(Address(rsp, BasicObjectLock::obj_offset_in_bytes()), rax); // store object 600 __ mov(rdx, rsp); // object address 601 __ lock_object(rdx); 602 } 603 604 // 605 // Generate a fixed interpreter frame. This is identical setup for interpreted methods 606 // and for native methods hence the shared code. 607 608 void TemplateInterpreterGenerator::generate_fixed_frame(bool native_call) { 609 // initialize fixed part of activation frame 610 __ push(rax); // save return address 611 __ enter(); // save old & set new rbp, 612 613 614 __ push(rsi); // set sender sp 615 __ push((int32_t)NULL_WORD); // leave last_sp as null 616 __ movptr(rsi, Address(rbx,Method::const_offset())); // get ConstMethod* 617 __ lea(rsi, Address(rsi,ConstMethod::codes_offset())); // get codebase 618 __ push(rbx); // save Method* 619 if (ProfileInterpreter) { 620 Label method_data_continue; 621 __ movptr(rdx, Address(rbx, in_bytes(Method::method_data_offset()))); 622 __ testptr(rdx, rdx); 623 __ jcc(Assembler::zero, method_data_continue); 624 __ addptr(rdx, in_bytes(MethodData::data_offset())); 625 __ bind(method_data_continue); 626 __ push(rdx); // set the mdp (method data pointer) 627 } else { 628 __ push(0); 629 } 630 631 __ movptr(rdx, Address(rbx, Method::const_offset())); 632 __ movptr(rdx, Address(rdx, ConstMethod::constants_offset())); 633 __ movptr(rdx, Address(rdx, ConstantPool::cache_offset_in_bytes())); 634 __ push(rdx); // set constant pool cache 635 __ push(rdi); // set locals pointer 636 if (native_call) { 637 __ push(0); // no bcp 638 } else { 639 __ push(rsi); // set bcp 640 } 641 __ push(0); // reserve word for pointer to expression stack bottom 642 __ movptr(Address(rsp, 0), rsp); // set expression stack bottom 643 } 644 645 // End of helpers 646 647 // 648 // Various method entries 649 //------------------------------------------------------------------------------------------------------------------------ 650 // 651 // 652 653 // Call an accessor method (assuming it is resolved, otherwise drop into vanilla (slow path) entry 654 655 address InterpreterGenerator::generate_accessor_entry(void) { 656 657 // rbx,: Method* 658 // rcx: receiver (preserve for slow entry into asm interpreter) 659 660 // rsi: senderSP must preserved for slow path, set SP to it on fast path 661 662 address entry_point = __ pc(); 663 Label xreturn_path; 664 665 // do fastpath for resolved accessor methods 666 if (UseFastAccessorMethods) { 667 Label slow_path; 668 // If we need a safepoint check, generate full interpreter entry. 669 ExternalAddress state(SafepointSynchronize::address_of_state()); 670 __ cmp32(ExternalAddress(SafepointSynchronize::address_of_state()), 671 SafepointSynchronize::_not_synchronized); 672 673 __ jcc(Assembler::notEqual, slow_path); 674 // ASM/C++ Interpreter 675 // Code: _aload_0, _(i|a)getfield, _(i|a)return or any rewrites thereof; parameter size = 1 676 // Note: We can only use this code if the getfield has been resolved 677 // and if we don't have a null-pointer exception => check for 678 // these conditions first and use slow path if necessary. 679 // rbx,: method 680 // rcx: receiver 681 __ movptr(rax, Address(rsp, wordSize)); 682 683 // check if local 0 != NULL and read field 684 __ testptr(rax, rax); 685 __ jcc(Assembler::zero, slow_path); 686 687 // read first instruction word and extract bytecode @ 1 and index @ 2 688 __ movptr(rdx, Address(rbx, Method::const_offset())); 689 __ movptr(rdi, Address(rdx, ConstMethod::constants_offset())); 690 __ movl(rdx, Address(rdx, ConstMethod::codes_offset())); 691 // Shift codes right to get the index on the right. 692 // The bytecode fetched looks like <index><0xb4><0x2a> 693 __ shrl(rdx, 2*BitsPerByte); 694 __ shll(rdx, exact_log2(in_words(ConstantPoolCacheEntry::size()))); 695 __ movptr(rdi, Address(rdi, ConstantPool::cache_offset_in_bytes())); 696 697 // rax,: local 0 698 // rbx,: method 699 // rcx: receiver - do not destroy since it is needed for slow path! 700 // rcx: scratch 701 // rdx: constant pool cache index 702 // rdi: constant pool cache 703 // rsi: sender sp 704 705 // check if getfield has been resolved and read constant pool cache entry 706 // check the validity of the cache entry by testing whether _indices field 707 // contains Bytecode::_getfield in b1 byte. 708 assert(in_words(ConstantPoolCacheEntry::size()) == 4, "adjust shift below"); 709 __ movl(rcx, 710 Address(rdi, 711 rdx, 712 Address::times_ptr, ConstantPoolCache::base_offset() + ConstantPoolCacheEntry::indices_offset())); 713 __ shrl(rcx, 2*BitsPerByte); 714 __ andl(rcx, 0xFF); 715 __ cmpl(rcx, Bytecodes::_getfield); 716 __ jcc(Assembler::notEqual, slow_path); 717 718 // Note: constant pool entry is not valid before bytecode is resolved 719 __ movptr(rcx, 720 Address(rdi, 721 rdx, 722 Address::times_ptr, ConstantPoolCache::base_offset() + ConstantPoolCacheEntry::f2_offset())); 723 __ movl(rdx, 724 Address(rdi, 725 rdx, 726 Address::times_ptr, ConstantPoolCache::base_offset() + ConstantPoolCacheEntry::flags_offset())); 727 728 Label notByte, notShort, notChar; 729 const Address field_address (rax, rcx, Address::times_1); 730 731 // Need to differentiate between igetfield, agetfield, bgetfield etc. 732 // because they are different sizes. 733 // Use the type from the constant pool cache 734 __ shrl(rdx, ConstantPoolCacheEntry::tos_state_shift); 735 // Make sure we don't need to mask rdx after the above shift 736 ConstantPoolCacheEntry::verify_tos_state_shift(); 737 __ cmpl(rdx, btos); 738 __ jcc(Assembler::notEqual, notByte); 739 __ load_signed_byte(rax, field_address); 740 __ jmp(xreturn_path); 741 742 __ bind(notByte); 743 __ cmpl(rdx, stos); 744 __ jcc(Assembler::notEqual, notShort); 745 __ load_signed_short(rax, field_address); 746 __ jmp(xreturn_path); 747 748 __ bind(notShort); 749 __ cmpl(rdx, ctos); 750 __ jcc(Assembler::notEqual, notChar); 751 __ load_unsigned_short(rax, field_address); 752 __ jmp(xreturn_path); 753 754 __ bind(notChar); 755 #ifdef ASSERT 756 Label okay; 757 __ cmpl(rdx, atos); 758 __ jcc(Assembler::equal, okay); 759 __ cmpl(rdx, itos); 760 __ jcc(Assembler::equal, okay); 761 __ stop("what type is this?"); 762 __ bind(okay); 763 #endif // ASSERT 764 // All the rest are a 32 bit wordsize 765 // This is ok for now. Since fast accessors should be going away 766 __ movptr(rax, field_address); 767 768 __ bind(xreturn_path); 769 770 // _ireturn/_areturn 771 __ pop(rdi); // get return address 772 __ mov(rsp, rsi); // set sp to sender sp 773 __ jmp(rdi); 774 775 // generate a vanilla interpreter entry as the slow path 776 __ bind(slow_path); 777 778 (void) generate_normal_entry(false); 779 return entry_point; 780 } 781 return NULL; 782 783 } 784 785 // Method entry for java.lang.ref.Reference.get. 786 address InterpreterGenerator::generate_Reference_get_entry(void) { 787 #if INCLUDE_ALL_GCS 788 // Code: _aload_0, _getfield, _areturn 789 // parameter size = 1 790 // 791 // The code that gets generated by this routine is split into 2 parts: 792 // 1. The "intrinsified" code for G1 (or any SATB based GC), 793 // 2. The slow path - which is an expansion of the regular method entry. 794 // 795 // Notes:- 796 // * In the G1 code we do not check whether we need to block for 797 // a safepoint. If G1 is enabled then we must execute the specialized 798 // code for Reference.get (except when the Reference object is null) 799 // so that we can log the value in the referent field with an SATB 800 // update buffer. 801 // If the code for the getfield template is modified so that the 802 // G1 pre-barrier code is executed when the current method is 803 // Reference.get() then going through the normal method entry 804 // will be fine. 805 // * The G1 code below can, however, check the receiver object (the instance 806 // of java.lang.Reference) and jump to the slow path if null. If the 807 // Reference object is null then we obviously cannot fetch the referent 808 // and so we don't need to call the G1 pre-barrier. Thus we can use the 809 // regular method entry code to generate the NPE. 810 // 811 // This code is based on generate_accessor_enty. 812 813 // rbx,: Method* 814 // rcx: receiver (preserve for slow entry into asm interpreter) 815 816 // rsi: senderSP must preserved for slow path, set SP to it on fast path 817 818 address entry = __ pc(); 819 820 const int referent_offset = java_lang_ref_Reference::referent_offset; 821 guarantee(referent_offset > 0, "referent offset not initialized"); 822 823 if (UseG1GC) { 824 Label slow_path; 825 826 // Check if local 0 != NULL 827 // If the receiver is null then it is OK to jump to the slow path. 828 __ movptr(rax, Address(rsp, wordSize)); 829 __ testptr(rax, rax); 830 __ jcc(Assembler::zero, slow_path); 831 832 // rax: local 0 (must be preserved across the G1 barrier call) 833 // 834 // rbx: method (at this point it's scratch) 835 // rcx: receiver (at this point it's scratch) 836 // rdx: scratch 837 // rdi: scratch 838 // 839 // rsi: sender sp 840 841 // Preserve the sender sp in case the pre-barrier 842 // calls the runtime 843 __ push(rsi); 844 845 // Load the value of the referent field. 846 const Address field_address(rax, referent_offset); 847 __ movptr(rax, field_address); 848 849 // Generate the G1 pre-barrier code to log the value of 850 // the referent field in an SATB buffer. 851 __ get_thread(rcx); 852 __ g1_write_barrier_pre(noreg /* obj */, 853 rax /* pre_val */, 854 rcx /* thread */, 855 rbx /* tmp */, 856 true /* tosca_save */, 857 true /* expand_call */); 858 859 // _areturn 860 __ pop(rsi); // get sender sp 861 __ pop(rdi); // get return address 862 __ mov(rsp, rsi); // set sp to sender sp 863 __ jmp(rdi); 864 865 __ bind(slow_path); 866 (void) generate_normal_entry(false); 867 868 return entry; 869 } 870 #endif // INCLUDE_ALL_GCS 871 872 // If G1 is not enabled then attempt to go through the accessor entry point 873 // Reference.get is an accessor 874 return generate_accessor_entry(); 875 } 876 877 /** 878 * Method entry for static native methods: 879 * int java.util.zip.CRC32.update(int crc, int b) 880 */ 881 address InterpreterGenerator::generate_CRC32_update_entry() { 882 if (UseCRC32Intrinsics) { 883 address entry = __ pc(); 884 885 // rbx,: Method* 886 // rsi: senderSP must preserved for slow path, set SP to it on fast path 887 // rdx: scratch 888 // rdi: scratch 889 890 Label slow_path; 891 // If we need a safepoint check, generate full interpreter entry. 892 ExternalAddress state(SafepointSynchronize::address_of_state()); 893 __ cmp32(ExternalAddress(SafepointSynchronize::address_of_state()), 894 SafepointSynchronize::_not_synchronized); 895 __ jcc(Assembler::notEqual, slow_path); 896 897 // We don't generate local frame and don't align stack because 898 // we call stub code and there is no safepoint on this path. 899 900 // Load parameters 901 const Register crc = rax; // crc 902 const Register val = rdx; // source java byte value 903 const Register tbl = rdi; // scratch 904 905 // Arguments are reversed on java expression stack 906 __ movl(val, Address(rsp, wordSize)); // byte value 907 __ movl(crc, Address(rsp, 2*wordSize)); // Initial CRC 908 909 __ lea(tbl, ExternalAddress(StubRoutines::crc_table_addr())); 910 __ notl(crc); // ~crc 911 __ update_byte_crc32(crc, val, tbl); 912 __ notl(crc); // ~crc 913 // result in rax 914 915 // _areturn 916 __ pop(rdi); // get return address 917 __ mov(rsp, rsi); // set sp to sender sp 918 __ jmp(rdi); 919 920 // generate a vanilla native entry as the slow path 921 __ bind(slow_path); 922 923 (void) generate_native_entry(false); 924 925 return entry; 926 } 927 return generate_native_entry(false); 928 } 929 930 /** 931 * Method entry for static native methods: 932 * int java.util.zip.CRC32.updateBytes(int crc, byte[] b, int off, int len) 933 * int java.util.zip.CRC32.updateByteBuffer(int crc, long buf, int off, int len) 934 */ 935 address InterpreterGenerator::generate_CRC32_updateBytes_entry(AbstractInterpreter::MethodKind kind) { 936 if (UseCRC32Intrinsics) { 937 address entry = __ pc(); 938 939 // rbx,: Method* 940 // rsi: senderSP must preserved for slow path, set SP to it on fast path 941 // rdx: scratch 942 // rdi: scratch 943 944 Label slow_path; 945 // If we need a safepoint check, generate full interpreter entry. 946 ExternalAddress state(SafepointSynchronize::address_of_state()); 947 __ cmp32(ExternalAddress(SafepointSynchronize::address_of_state()), 948 SafepointSynchronize::_not_synchronized); 949 __ jcc(Assembler::notEqual, slow_path); 950 951 // We don't generate local frame and don't align stack because 952 // we call stub code and there is no safepoint on this path. 953 954 // Load parameters 955 const Register crc = rax; // crc 956 const Register buf = rdx; // source java byte array address 957 const Register len = rdi; // length 958 959 // Arguments are reversed on java expression stack 960 __ movl(len, Address(rsp, wordSize)); // Length 961 // Calculate address of start element 962 if (kind == Interpreter::java_util_zip_CRC32_updateByteBuffer) { 963 __ movptr(buf, Address(rsp, 3*wordSize)); // long buf 964 __ addptr(buf, Address(rsp, 2*wordSize)); // + offset 965 __ movl(crc, Address(rsp, 5*wordSize)); // Initial CRC 966 } else { 967 __ movptr(buf, Address(rsp, 3*wordSize)); // byte[] array 968 __ addptr(buf, arrayOopDesc::base_offset_in_bytes(T_BYTE)); // + header size 969 __ addptr(buf, Address(rsp, 2*wordSize)); // + offset 970 __ movl(crc, Address(rsp, 4*wordSize)); // Initial CRC 971 } 972 973 __ super_call_VM_leaf(CAST_FROM_FN_PTR(address, StubRoutines::updateBytesCRC32()), crc, buf, len); 974 // result in rax 975 976 // _areturn 977 __ pop(rdi); // get return address 978 __ mov(rsp, rsi); // set sp to sender sp 979 __ jmp(rdi); 980 981 // generate a vanilla native entry as the slow path 982 __ bind(slow_path); 983 984 (void) generate_native_entry(false); 985 986 return entry; 987 } 988 return generate_native_entry(false); 989 } 990 991 // 992 // Interpreter stub for calling a native method. (asm interpreter) 993 // This sets up a somewhat different looking stack for calling the native method 994 // than the typical interpreter frame setup. 995 // 996 997 address InterpreterGenerator::generate_native_entry(bool synchronized) { 998 // determine code generation flags 999 bool inc_counter = UseCompiler || CountCompiledCalls; 1000 1001 // rbx,: Method* 1002 // rsi: sender sp 1003 // rsi: previous interpreter state (C++ interpreter) must preserve 1004 address entry_point = __ pc(); 1005 1006 const Address constMethod (rbx, Method::const_offset()); 1007 const Address access_flags (rbx, Method::access_flags_offset()); 1008 const Address size_of_parameters(rcx, ConstMethod::size_of_parameters_offset()); 1009 1010 // get parameter size (always needed) 1011 __ movptr(rcx, constMethod); 1012 __ load_unsigned_short(rcx, size_of_parameters); 1013 1014 // native calls don't need the stack size check since they have no expression stack 1015 // and the arguments are already on the stack and we only add a handful of words 1016 // to the stack 1017 1018 // rbx,: Method* 1019 // rcx: size of parameters 1020 // rsi: sender sp 1021 1022 __ pop(rax); // get return address 1023 // for natives the size of locals is zero 1024 1025 // compute beginning of parameters (rdi) 1026 __ lea(rdi, Address(rsp, rcx, Interpreter::stackElementScale(), -wordSize)); 1027 1028 1029 // add 2 zero-initialized slots for native calls 1030 // NULL result handler 1031 __ push((int32_t)NULL_WORD); 1032 // NULL oop temp (mirror or jni oop result) 1033 __ push((int32_t)NULL_WORD); 1034 1035 // initialize fixed part of activation frame 1036 generate_fixed_frame(true); 1037 1038 // make sure method is native & not abstract 1039 #ifdef ASSERT 1040 __ movl(rax, access_flags); 1041 { 1042 Label L; 1043 __ testl(rax, JVM_ACC_NATIVE); 1044 __ jcc(Assembler::notZero, L); 1045 __ stop("tried to execute non-native method as native"); 1046 __ bind(L); 1047 } 1048 { Label L; 1049 __ testl(rax, JVM_ACC_ABSTRACT); 1050 __ jcc(Assembler::zero, L); 1051 __ stop("tried to execute abstract method in interpreter"); 1052 __ bind(L); 1053 } 1054 #endif 1055 1056 // Since at this point in the method invocation the exception handler 1057 // would try to exit the monitor of synchronized methods which hasn't 1058 // been entered yet, we set the thread local variable 1059 // _do_not_unlock_if_synchronized to true. The remove_activation will 1060 // check this flag. 1061 1062 __ get_thread(rax); 1063 const Address do_not_unlock_if_synchronized(rax, 1064 in_bytes(JavaThread::do_not_unlock_if_synchronized_offset())); 1065 __ movbool(do_not_unlock_if_synchronized, true); 1066 1067 // increment invocation count & check for overflow 1068 Label invocation_counter_overflow; 1069 if (inc_counter) { 1070 generate_counter_incr(&invocation_counter_overflow, NULL, NULL); 1071 } 1072 1073 Label continue_after_compile; 1074 __ bind(continue_after_compile); 1075 1076 bang_stack_shadow_pages(true); 1077 1078 // reset the _do_not_unlock_if_synchronized flag 1079 __ get_thread(rax); 1080 __ movbool(do_not_unlock_if_synchronized, false); 1081 1082 // check for synchronized methods 1083 // Must happen AFTER invocation_counter check and stack overflow check, 1084 // so method is not locked if overflows. 1085 // 1086 if (synchronized) { 1087 lock_method(); 1088 } else { 1089 // no synchronization necessary 1090 #ifdef ASSERT 1091 { Label L; 1092 __ movl(rax, access_flags); 1093 __ testl(rax, JVM_ACC_SYNCHRONIZED); 1094 __ jcc(Assembler::zero, L); 1095 __ stop("method needs synchronization"); 1096 __ bind(L); 1097 } 1098 #endif 1099 } 1100 1101 // start execution 1102 #ifdef ASSERT 1103 { Label L; 1104 const Address monitor_block_top (rbp, 1105 frame::interpreter_frame_monitor_block_top_offset * wordSize); 1106 __ movptr(rax, monitor_block_top); 1107 __ cmpptr(rax, rsp); 1108 __ jcc(Assembler::equal, L); 1109 __ stop("broken stack frame setup in interpreter"); 1110 __ bind(L); 1111 } 1112 #endif 1113 1114 // jvmti/dtrace support 1115 __ notify_method_entry(); 1116 1117 // work registers 1118 const Register method = rbx; 1119 const Register thread = rdi; 1120 const Register t = rcx; 1121 1122 // allocate space for parameters 1123 __ get_method(method); 1124 __ movptr(t, Address(method, Method::const_offset())); 1125 __ load_unsigned_short(t, Address(t, ConstMethod::size_of_parameters_offset())); 1126 1127 __ shlptr(t, Interpreter::logStackElementSize); 1128 __ addptr(t, 2*wordSize); // allocate two more slots for JNIEnv and possible mirror 1129 __ subptr(rsp, t); 1130 __ andptr(rsp, -(StackAlignmentInBytes)); // gcc needs 16 byte aligned stacks to do XMM intrinsics 1131 1132 // get signature handler 1133 { Label L; 1134 __ movptr(t, Address(method, Method::signature_handler_offset())); 1135 __ testptr(t, t); 1136 __ jcc(Assembler::notZero, L); 1137 __ call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::prepare_native_call), method); 1138 __ get_method(method); 1139 __ movptr(t, Address(method, Method::signature_handler_offset())); 1140 __ bind(L); 1141 } 1142 1143 // call signature handler 1144 assert(InterpreterRuntime::SignatureHandlerGenerator::from() == rdi, "adjust this code"); 1145 assert(InterpreterRuntime::SignatureHandlerGenerator::to () == rsp, "adjust this code"); 1146 assert(InterpreterRuntime::SignatureHandlerGenerator::temp() == t , "adjust this code"); 1147 // The generated handlers do not touch RBX (the method oop). 1148 // However, large signatures cannot be cached and are generated 1149 // each time here. The slow-path generator will blow RBX 1150 // sometime, so we must reload it after the call. 1151 __ call(t); 1152 __ get_method(method); // slow path call blows RBX on DevStudio 5.0 1153 1154 // result handler is in rax, 1155 // set result handler 1156 __ movptr(Address(rbp, frame::interpreter_frame_result_handler_offset*wordSize), rax); 1157 1158 // pass mirror handle if static call 1159 { Label L; 1160 const int mirror_offset = in_bytes(Klass::java_mirror_offset()); 1161 __ movl(t, Address(method, Method::access_flags_offset())); 1162 __ testl(t, JVM_ACC_STATIC); 1163 __ jcc(Assembler::zero, L); 1164 // get mirror 1165 __ movptr(t, Address(method, Method:: const_offset())); 1166 __ movptr(t, Address(t, ConstMethod::constants_offset())); 1167 __ movptr(t, Address(t, ConstantPool::pool_holder_offset_in_bytes())); 1168 __ movptr(t, Address(t, mirror_offset)); 1169 // copy mirror into activation frame 1170 __ movptr(Address(rbp, frame::interpreter_frame_oop_temp_offset * wordSize), t); 1171 // pass handle to mirror 1172 __ lea(t, Address(rbp, frame::interpreter_frame_oop_temp_offset * wordSize)); 1173 __ movptr(Address(rsp, wordSize), t); 1174 __ bind(L); 1175 } 1176 1177 // get native function entry point 1178 { Label L; 1179 __ movptr(rax, Address(method, Method::native_function_offset())); 1180 ExternalAddress unsatisfied(SharedRuntime::native_method_throw_unsatisfied_link_error_entry()); 1181 __ cmpptr(rax, unsatisfied.addr()); 1182 __ jcc(Assembler::notEqual, L); 1183 __ call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::prepare_native_call), method); 1184 __ get_method(method); 1185 __ movptr(rax, Address(method, Method::native_function_offset())); 1186 __ bind(L); 1187 } 1188 1189 // pass JNIEnv 1190 __ get_thread(thread); 1191 __ lea(t, Address(thread, JavaThread::jni_environment_offset())); 1192 __ movptr(Address(rsp, 0), t); 1193 1194 // set_last_Java_frame_before_call 1195 // It is enough that the pc() 1196 // points into the right code segment. It does not have to be the correct return pc. 1197 __ set_last_Java_frame(thread, noreg, rbp, __ pc()); 1198 1199 // change thread state 1200 #ifdef ASSERT 1201 { Label L; 1202 __ movl(t, Address(thread, JavaThread::thread_state_offset())); 1203 __ cmpl(t, _thread_in_Java); 1204 __ jcc(Assembler::equal, L); 1205 __ stop("Wrong thread state in native stub"); 1206 __ bind(L); 1207 } 1208 #endif 1209 1210 // Change state to native 1211 __ movl(Address(thread, JavaThread::thread_state_offset()), _thread_in_native); 1212 __ call(rax); 1213 1214 // result potentially in rdx:rax or ST0 1215 1216 // Verify or restore cpu control state after JNI call 1217 __ restore_cpu_control_state_after_jni(); 1218 1219 // save potential result in ST(0) & rdx:rax 1220 // (if result handler is the T_FLOAT or T_DOUBLE handler, result must be in ST0 - 1221 // the check is necessary to avoid potential Intel FPU overflow problems by saving/restoring 'empty' FPU registers) 1222 // It is safe to do this push because state is _thread_in_native and return address will be found 1223 // via _last_native_pc and not via _last_jave_sp 1224 1225 // NOTE: the order of theses push(es) is known to frame::interpreter_frame_result. 1226 // If the order changes or anything else is added to the stack the code in 1227 // interpreter_frame_result will have to be changed. 1228 1229 { Label L; 1230 Label push_double; 1231 ExternalAddress float_handler(AbstractInterpreter::result_handler(T_FLOAT)); 1232 ExternalAddress double_handler(AbstractInterpreter::result_handler(T_DOUBLE)); 1233 __ cmpptr(Address(rbp, (frame::interpreter_frame_oop_temp_offset + 1)*wordSize), 1234 float_handler.addr()); 1235 __ jcc(Assembler::equal, push_double); 1236 __ cmpptr(Address(rbp, (frame::interpreter_frame_oop_temp_offset + 1)*wordSize), 1237 double_handler.addr()); 1238 __ jcc(Assembler::notEqual, L); 1239 __ bind(push_double); 1240 __ push(dtos); 1241 __ bind(L); 1242 } 1243 __ push(ltos); 1244 1245 // change thread state 1246 __ get_thread(thread); 1247 __ movl(Address(thread, JavaThread::thread_state_offset()), _thread_in_native_trans); 1248 if(os::is_MP()) { 1249 if (UseMembar) { 1250 // Force this write out before the read below 1251 __ membar(Assembler::Membar_mask_bits( 1252 Assembler::LoadLoad | Assembler::LoadStore | 1253 Assembler::StoreLoad | Assembler::StoreStore)); 1254 } else { 1255 // Write serialization page so VM thread can do a pseudo remote membar. 1256 // We use the current thread pointer to calculate a thread specific 1257 // offset to write to within the page. This minimizes bus traffic 1258 // due to cache line collision. 1259 __ serialize_memory(thread, rcx); 1260 } 1261 } 1262 1263 if (AlwaysRestoreFPU) { 1264 // Make sure the control word is correct. 1265 __ fldcw(ExternalAddress(StubRoutines::addr_fpu_cntrl_wrd_std())); 1266 } 1267 1268 // check for safepoint operation in progress and/or pending suspend requests 1269 { Label Continue; 1270 1271 __ cmp32(ExternalAddress(SafepointSynchronize::address_of_state()), 1272 SafepointSynchronize::_not_synchronized); 1273 1274 Label L; 1275 __ jcc(Assembler::notEqual, L); 1276 __ cmpl(Address(thread, JavaThread::suspend_flags_offset()), 0); 1277 __ jcc(Assembler::equal, Continue); 1278 __ bind(L); 1279 1280 // Don't use call_VM as it will see a possible pending exception and forward it 1281 // and never return here preventing us from clearing _last_native_pc down below. 1282 // Also can't use call_VM_leaf either as it will check to see if rsi & rdi are 1283 // preserved and correspond to the bcp/locals pointers. So we do a runtime call 1284 // by hand. 1285 // 1286 __ push(thread); 1287 __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, 1288 JavaThread::check_special_condition_for_native_trans))); 1289 __ increment(rsp, wordSize); 1290 __ get_thread(thread); 1291 1292 __ bind(Continue); 1293 } 1294 1295 // change thread state 1296 __ movl(Address(thread, JavaThread::thread_state_offset()), _thread_in_Java); 1297 1298 __ reset_last_Java_frame(thread, true, true); 1299 1300 // reset handle block 1301 __ movptr(t, Address(thread, JavaThread::active_handles_offset())); 1302 __ movptr(Address(t, JNIHandleBlock::top_offset_in_bytes()), NULL_WORD); 1303 1304 // If result was an oop then unbox and save it in the frame 1305 { Label L; 1306 Label no_oop, store_result; 1307 ExternalAddress handler(AbstractInterpreter::result_handler(T_OBJECT)); 1308 __ cmpptr(Address(rbp, frame::interpreter_frame_result_handler_offset*wordSize), 1309 handler.addr()); 1310 __ jcc(Assembler::notEqual, no_oop); 1311 __ cmpptr(Address(rsp, 0), (int32_t)NULL_WORD); 1312 __ pop(ltos); 1313 __ testptr(rax, rax); 1314 __ jcc(Assembler::zero, store_result); 1315 // unbox 1316 __ movptr(rax, Address(rax, 0)); 1317 __ bind(store_result); 1318 __ movptr(Address(rbp, (frame::interpreter_frame_oop_temp_offset)*wordSize), rax); 1319 // keep stack depth as expected by pushing oop which will eventually be discarded 1320 __ push(ltos); 1321 __ bind(no_oop); 1322 } 1323 1324 { 1325 Label no_reguard; 1326 __ cmpl(Address(thread, JavaThread::stack_guard_state_offset()), JavaThread::stack_guard_yellow_disabled); 1327 __ jcc(Assembler::notEqual, no_reguard); 1328 1329 __ pusha(); 1330 __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, SharedRuntime::reguard_yellow_pages))); 1331 __ popa(); 1332 1333 __ bind(no_reguard); 1334 } 1335 1336 // restore rsi to have legal interpreter frame, 1337 // i.e., bci == 0 <=> rsi == code_base() 1338 // Can't call_VM until bcp is within reasonable. 1339 __ get_method(method); // method is junk from thread_in_native to now. 1340 __ movptr(rsi, Address(method,Method::const_offset())); // get ConstMethod* 1341 __ lea(rsi, Address(rsi,ConstMethod::codes_offset())); // get codebase 1342 1343 // handle exceptions (exception handling will handle unlocking!) 1344 { Label L; 1345 __ cmpptr(Address(thread, Thread::pending_exception_offset()), (int32_t)NULL_WORD); 1346 __ jcc(Assembler::zero, L); 1347 // Note: At some point we may want to unify this with the code used in call_VM_base(); 1348 // i.e., we should use the StubRoutines::forward_exception code. For now this 1349 // doesn't work here because the rsp is not correctly set at this point. 1350 __ MacroAssembler::call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::throw_pending_exception)); 1351 __ should_not_reach_here(); 1352 __ bind(L); 1353 } 1354 1355 // do unlocking if necessary 1356 { Label L; 1357 __ movl(t, Address(method, Method::access_flags_offset())); 1358 __ testl(t, JVM_ACC_SYNCHRONIZED); 1359 __ jcc(Assembler::zero, L); 1360 // the code below should be shared with interpreter macro assembler implementation 1361 { Label unlock; 1362 // BasicObjectLock will be first in list, since this is a synchronized method. However, need 1363 // to check that the object has not been unlocked by an explicit monitorexit bytecode. 1364 const Address monitor(rbp, frame::interpreter_frame_initial_sp_offset * wordSize - (int)sizeof(BasicObjectLock)); 1365 1366 __ lea(rdx, monitor); // address of first monitor 1367 1368 __ movptr(t, Address(rdx, BasicObjectLock::obj_offset_in_bytes())); 1369 __ testptr(t, t); 1370 __ jcc(Assembler::notZero, unlock); 1371 1372 // Entry already unlocked, need to throw exception 1373 __ MacroAssembler::call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::throw_illegal_monitor_state_exception)); 1374 __ should_not_reach_here(); 1375 1376 __ bind(unlock); 1377 __ unlock_object(rdx); 1378 } 1379 __ bind(L); 1380 } 1381 1382 // jvmti/dtrace support 1383 // Note: This must happen _after_ handling/throwing any exceptions since 1384 // the exception handler code notifies the runtime of method exits 1385 // too. If this happens before, method entry/exit notifications are 1386 // not properly paired (was bug - gri 11/22/99). 1387 __ notify_method_exit(vtos, InterpreterMacroAssembler::NotifyJVMTI); 1388 1389 // restore potential result in rdx:rax, call result handler to restore potential result in ST0 & handle result 1390 __ pop(ltos); 1391 __ movptr(t, Address(rbp, frame::interpreter_frame_result_handler_offset*wordSize)); 1392 __ call(t); 1393 1394 // remove activation 1395 __ movptr(t, Address(rbp, frame::interpreter_frame_sender_sp_offset * wordSize)); // get sender sp 1396 __ leave(); // remove frame anchor 1397 __ pop(rdi); // get return address 1398 __ mov(rsp, t); // set sp to sender sp 1399 __ jmp(rdi); 1400 1401 if (inc_counter) { 1402 // Handle overflow of counter and compile method 1403 __ bind(invocation_counter_overflow); 1404 generate_counter_overflow(&continue_after_compile); 1405 } 1406 1407 return entry_point; 1408 } 1409 1410 // 1411 // Generic interpreted method entry to (asm) interpreter 1412 // 1413 address InterpreterGenerator::generate_normal_entry(bool synchronized) { 1414 // determine code generation flags 1415 bool inc_counter = UseCompiler || CountCompiledCalls; 1416 1417 // rbx,: Method* 1418 // rsi: sender sp 1419 address entry_point = __ pc(); 1420 1421 const Address constMethod (rbx, Method::const_offset()); 1422 const Address access_flags (rbx, Method::access_flags_offset()); 1423 const Address size_of_parameters(rdx, ConstMethod::size_of_parameters_offset()); 1424 const Address size_of_locals (rdx, ConstMethod::size_of_locals_offset()); 1425 1426 // get parameter size (always needed) 1427 __ movptr(rdx, constMethod); 1428 __ load_unsigned_short(rcx, size_of_parameters); 1429 1430 // rbx,: Method* 1431 // rcx: size of parameters 1432 1433 // rsi: sender_sp (could differ from sp+wordSize if we were called via c2i ) 1434 1435 __ load_unsigned_short(rdx, size_of_locals); // get size of locals in words 1436 __ subl(rdx, rcx); // rdx = no. of additional locals 1437 1438 // see if we've got enough room on the stack for locals plus overhead. 1439 generate_stack_overflow_check(); 1440 1441 // get return address 1442 __ pop(rax); 1443 1444 // compute beginning of parameters (rdi) 1445 __ lea(rdi, Address(rsp, rcx, Interpreter::stackElementScale(), -wordSize)); 1446 1447 // rdx - # of additional locals 1448 // allocate space for locals 1449 // explicitly initialize locals 1450 { 1451 Label exit, loop; 1452 __ testl(rdx, rdx); 1453 __ jcc(Assembler::lessEqual, exit); // do nothing if rdx <= 0 1454 __ bind(loop); 1455 __ push((int32_t)NULL_WORD); // initialize local variables 1456 __ decrement(rdx); // until everything initialized 1457 __ jcc(Assembler::greater, loop); 1458 __ bind(exit); 1459 } 1460 1461 // initialize fixed part of activation frame 1462 generate_fixed_frame(false); 1463 1464 // make sure method is not native & not abstract 1465 #ifdef ASSERT 1466 __ movl(rax, access_flags); 1467 { 1468 Label L; 1469 __ testl(rax, JVM_ACC_NATIVE); 1470 __ jcc(Assembler::zero, L); 1471 __ stop("tried to execute native method as non-native"); 1472 __ bind(L); 1473 } 1474 { Label L; 1475 __ testl(rax, JVM_ACC_ABSTRACT); 1476 __ jcc(Assembler::zero, L); 1477 __ stop("tried to execute abstract method in interpreter"); 1478 __ bind(L); 1479 } 1480 #endif 1481 1482 // Since at this point in the method invocation the exception handler 1483 // would try to exit the monitor of synchronized methods which hasn't 1484 // been entered yet, we set the thread local variable 1485 // _do_not_unlock_if_synchronized to true. The remove_activation will 1486 // check this flag. 1487 1488 __ get_thread(rax); 1489 const Address do_not_unlock_if_synchronized(rax, 1490 in_bytes(JavaThread::do_not_unlock_if_synchronized_offset())); 1491 __ movbool(do_not_unlock_if_synchronized, true); 1492 1493 // increment invocation count & check for overflow 1494 Label invocation_counter_overflow; 1495 Label profile_method; 1496 Label profile_method_continue; 1497 if (inc_counter) { 1498 generate_counter_incr(&invocation_counter_overflow, &profile_method, &profile_method_continue); 1499 if (ProfileInterpreter) { 1500 __ bind(profile_method_continue); 1501 } 1502 } 1503 Label continue_after_compile; 1504 __ bind(continue_after_compile); 1505 1506 bang_stack_shadow_pages(false); 1507 1508 // reset the _do_not_unlock_if_synchronized flag 1509 __ get_thread(rax); 1510 __ movbool(do_not_unlock_if_synchronized, false); 1511 1512 // check for synchronized methods 1513 // Must happen AFTER invocation_counter check and stack overflow check, 1514 // so method is not locked if overflows. 1515 // 1516 if (synchronized) { 1517 // Allocate monitor and lock method 1518 lock_method(); 1519 } else { 1520 // no synchronization necessary 1521 #ifdef ASSERT 1522 { Label L; 1523 __ movl(rax, access_flags); 1524 __ testl(rax, JVM_ACC_SYNCHRONIZED); 1525 __ jcc(Assembler::zero, L); 1526 __ stop("method needs synchronization"); 1527 __ bind(L); 1528 } 1529 #endif 1530 } 1531 1532 // start execution 1533 #ifdef ASSERT 1534 { Label L; 1535 const Address monitor_block_top (rbp, 1536 frame::interpreter_frame_monitor_block_top_offset * wordSize); 1537 __ movptr(rax, monitor_block_top); 1538 __ cmpptr(rax, rsp); 1539 __ jcc(Assembler::equal, L); 1540 __ stop("broken stack frame setup in interpreter"); 1541 __ bind(L); 1542 } 1543 #endif 1544 1545 // jvmti support 1546 __ notify_method_entry(); 1547 1548 __ dispatch_next(vtos); 1549 1550 // invocation counter overflow 1551 if (inc_counter) { 1552 if (ProfileInterpreter) { 1553 // We have decided to profile this method in the interpreter 1554 __ bind(profile_method); 1555 __ call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::profile_method)); 1556 __ set_method_data_pointer_for_bcp(); 1557 __ get_method(rbx); 1558 __ jmp(profile_method_continue); 1559 } 1560 // Handle overflow of counter and compile method 1561 __ bind(invocation_counter_overflow); 1562 generate_counter_overflow(&continue_after_compile); 1563 } 1564 1565 return entry_point; 1566 } 1567 1568 //------------------------------------------------------------------------------------------------------------------------ 1569 // Entry points 1570 // 1571 // Here we generate the various kind of entries into the interpreter. 1572 // The two main entry type are generic bytecode methods and native call method. 1573 // These both come in synchronized and non-synchronized versions but the 1574 // frame layout they create is very similar. The other method entry 1575 // types are really just special purpose entries that are really entry 1576 // and interpretation all in one. These are for trivial methods like 1577 // accessor, empty, or special math methods. 1578 // 1579 // When control flow reaches any of the entry types for the interpreter 1580 // the following holds -> 1581 // 1582 // Arguments: 1583 // 1584 // rbx,: Method* 1585 // rcx: receiver 1586 // 1587 // 1588 // Stack layout immediately at entry 1589 // 1590 // [ return address ] <--- rsp 1591 // [ parameter n ] 1592 // ... 1593 // [ parameter 1 ] 1594 // [ expression stack ] (caller's java expression stack) 1595 1596 // Assuming that we don't go to one of the trivial specialized 1597 // entries the stack will look like below when we are ready to execute 1598 // the first bytecode (or call the native routine). The register usage 1599 // will be as the template based interpreter expects (see interpreter_x86.hpp). 1600 // 1601 // local variables follow incoming parameters immediately; i.e. 1602 // the return address is moved to the end of the locals). 1603 // 1604 // [ monitor entry ] <--- rsp 1605 // ... 1606 // [ monitor entry ] 1607 // [ expr. stack bottom ] 1608 // [ saved rsi ] 1609 // [ current rdi ] 1610 // [ Method* ] 1611 // [ saved rbp, ] <--- rbp, 1612 // [ return address ] 1613 // [ local variable m ] 1614 // ... 1615 // [ local variable 1 ] 1616 // [ parameter n ] 1617 // ... 1618 // [ parameter 1 ] <--- rdi 1619 1620 address AbstractInterpreterGenerator::generate_method_entry(AbstractInterpreter::MethodKind kind) { 1621 // determine code generation flags 1622 bool synchronized = false; 1623 address entry_point = NULL; 1624 InterpreterGenerator* ig_this = (InterpreterGenerator*)this; 1625 1626 switch (kind) { 1627 case Interpreter::zerolocals : break; 1628 case Interpreter::zerolocals_synchronized: synchronized = true; break; 1629 case Interpreter::native : entry_point = ig_this->generate_native_entry(false); break; 1630 case Interpreter::native_synchronized : entry_point = ig_this->generate_native_entry(true); break; 1631 case Interpreter::empty : entry_point = ig_this->generate_empty_entry(); break; 1632 case Interpreter::accessor : entry_point = ig_this->generate_accessor_entry(); break; 1633 case Interpreter::abstract : entry_point = ig_this->generate_abstract_entry(); break; 1634 1635 case Interpreter::java_lang_math_sin : // fall thru 1636 case Interpreter::java_lang_math_cos : // fall thru 1637 case Interpreter::java_lang_math_tan : // fall thru 1638 case Interpreter::java_lang_math_abs : // fall thru 1639 case Interpreter::java_lang_math_log : // fall thru 1640 case Interpreter::java_lang_math_log10 : // fall thru 1641 case Interpreter::java_lang_math_sqrt : // fall thru 1642 case Interpreter::java_lang_math_pow : // fall thru 1643 case Interpreter::java_lang_math_exp : entry_point = ig_this->generate_math_entry(kind); break; 1644 case Interpreter::java_lang_ref_reference_get 1645 : entry_point = ig_this->generate_Reference_get_entry(); break; 1646 case Interpreter::java_util_zip_CRC32_update 1647 : entry_point = ig_this->generate_CRC32_update_entry(); break; 1648 case Interpreter::java_util_zip_CRC32_updateBytes 1649 : // fall thru 1650 case Interpreter::java_util_zip_CRC32_updateByteBuffer 1651 : entry_point = ig_this->generate_CRC32_updateBytes_entry(kind); break; 1652 default: 1653 fatal(err_msg("unexpected method kind: %d", kind)); 1654 break; 1655 } 1656 1657 if (entry_point) return entry_point; 1658 1659 return ig_this->generate_normal_entry(synchronized); 1660 1661 } 1662 1663 // These should never be compiled since the interpreter will prefer 1664 // the compiled version to the intrinsic version. 1665 bool AbstractInterpreter::can_be_compiled(methodHandle m) { 1666 switch (method_kind(m)) { 1667 case Interpreter::java_lang_math_sin : // fall thru 1668 case Interpreter::java_lang_math_cos : // fall thru 1669 case Interpreter::java_lang_math_tan : // fall thru 1670 case Interpreter::java_lang_math_abs : // fall thru 1671 case Interpreter::java_lang_math_log : // fall thru 1672 case Interpreter::java_lang_math_log10 : // fall thru 1673 case Interpreter::java_lang_math_sqrt : // fall thru 1674 case Interpreter::java_lang_math_pow : // fall thru 1675 case Interpreter::java_lang_math_exp : 1676 return false; 1677 default: 1678 return true; 1679 } 1680 } 1681 1682 // How much stack a method activation needs in words. 1683 int AbstractInterpreter::size_top_interpreter_activation(Method* method) { 1684 1685 const int stub_code = 4; // see generate_call_stub 1686 // Save space for one monitor to get into the interpreted method in case 1687 // the method is synchronized 1688 int monitor_size = method->is_synchronized() ? 1689 1*frame::interpreter_frame_monitor_size() : 0; 1690 1691 // total overhead size: entry_size + (saved rbp, thru expr stack bottom). 1692 // be sure to change this if you add/subtract anything to/from the overhead area 1693 const int overhead_size = -frame::interpreter_frame_initial_sp_offset; 1694 1695 const int method_stack = (method->max_locals() + method->max_stack()) * 1696 Interpreter::stackElementWords; 1697 return overhead_size + method_stack + stub_code; 1698 } 1699 1700 // asm based interpreter deoptimization helpers 1701 1702 int AbstractInterpreter::layout_activation(Method* method, 1703 int tempcount, 1704 int popframe_extra_args, 1705 int moncount, 1706 int caller_actual_parameters, 1707 int callee_param_count, 1708 int callee_locals, 1709 frame* caller, 1710 frame* interpreter_frame, 1711 bool is_top_frame, 1712 bool is_bottom_frame) { 1713 // Note: This calculation must exactly parallel the frame setup 1714 // in AbstractInterpreterGenerator::generate_method_entry. 1715 // If interpreter_frame!=NULL, set up the method, locals, and monitors. 1716 // The frame interpreter_frame, if not NULL, is guaranteed to be the right size, 1717 // as determined by a previous call to this method. 1718 // It is also guaranteed to be walkable even though it is in a skeletal state 1719 // NOTE: return size is in words not bytes 1720 1721 // fixed size of an interpreter frame: 1722 int max_locals = method->max_locals() * Interpreter::stackElementWords; 1723 int extra_locals = (method->max_locals() - method->size_of_parameters()) * 1724 Interpreter::stackElementWords; 1725 1726 int overhead = frame::sender_sp_offset - frame::interpreter_frame_initial_sp_offset; 1727 1728 // Our locals were accounted for by the caller (or last_frame_adjust on the transistion) 1729 // Since the callee parameters already account for the callee's params we only need to account for 1730 // the extra locals. 1731 1732 1733 int size = overhead + 1734 ((callee_locals - callee_param_count)*Interpreter::stackElementWords) + 1735 (moncount*frame::interpreter_frame_monitor_size()) + 1736 tempcount*Interpreter::stackElementWords + popframe_extra_args; 1737 1738 if (interpreter_frame != NULL) { 1739 #ifdef ASSERT 1740 if (!EnableInvokeDynamic) 1741 // @@@ FIXME: Should we correct interpreter_frame_sender_sp in the calling sequences? 1742 // Probably, since deoptimization doesn't work yet. 1743 assert(caller->unextended_sp() == interpreter_frame->interpreter_frame_sender_sp(), "Frame not properly walkable"); 1744 assert(caller->sp() == interpreter_frame->sender_sp(), "Frame not properly walkable(2)"); 1745 #endif 1746 1747 interpreter_frame->interpreter_frame_set_method(method); 1748 // NOTE the difference in using sender_sp and interpreter_frame_sender_sp 1749 // interpreter_frame_sender_sp is the original sp of the caller (the unextended_sp) 1750 // and sender_sp is fp+8 1751 intptr_t* locals = interpreter_frame->sender_sp() + max_locals - 1; 1752 1753 #ifdef ASSERT 1754 if (caller->is_interpreted_frame()) { 1755 assert(locals < caller->fp() + frame::interpreter_frame_initial_sp_offset, "bad placement"); 1756 } 1757 #endif 1758 1759 interpreter_frame->interpreter_frame_set_locals(locals); 1760 BasicObjectLock* montop = interpreter_frame->interpreter_frame_monitor_begin(); 1761 BasicObjectLock* monbot = montop - moncount; 1762 interpreter_frame->interpreter_frame_set_monitor_end(monbot); 1763 1764 // Set last_sp 1765 intptr_t* rsp = (intptr_t*) monbot - 1766 tempcount*Interpreter::stackElementWords - 1767 popframe_extra_args; 1768 interpreter_frame->interpreter_frame_set_last_sp(rsp); 1769 1770 // All frames but the initial (oldest) interpreter frame we fill in have a 1771 // value for sender_sp that allows walking the stack but isn't 1772 // truly correct. Correct the value here. 1773 1774 if (extra_locals != 0 && 1775 interpreter_frame->sender_sp() == interpreter_frame->interpreter_frame_sender_sp() ) { 1776 interpreter_frame->set_interpreter_frame_sender_sp(caller->sp() + extra_locals); 1777 } 1778 *interpreter_frame->interpreter_frame_cache_addr() = 1779 method->constants()->cache(); 1780 } 1781 return size; 1782 } 1783 1784 1785 //------------------------------------------------------------------------------------------------------------------------ 1786 // Exceptions 1787 1788 void TemplateInterpreterGenerator::generate_throw_exception() { 1789 // Entry point in previous activation (i.e., if the caller was interpreted) 1790 Interpreter::_rethrow_exception_entry = __ pc(); 1791 const Register thread = rcx; 1792 1793 // Restore sp to interpreter_frame_last_sp even though we are going 1794 // to empty the expression stack for the exception processing. 1795 __ movptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), NULL_WORD); 1796 // rax,: exception 1797 // rdx: return address/pc that threw exception 1798 __ restore_bcp(); // rsi points to call/send 1799 __ restore_locals(); 1800 1801 // Entry point for exceptions thrown within interpreter code 1802 Interpreter::_throw_exception_entry = __ pc(); 1803 // expression stack is undefined here 1804 // rax,: exception 1805 // rsi: exception bcp 1806 __ verify_oop(rax); 1807 1808 // expression stack must be empty before entering the VM in case of an exception 1809 __ empty_expression_stack(); 1810 __ empty_FPU_stack(); 1811 // find exception handler address and preserve exception oop 1812 __ call_VM(rdx, CAST_FROM_FN_PTR(address, InterpreterRuntime::exception_handler_for_exception), rax); 1813 // rax,: exception handler entry point 1814 // rdx: preserved exception oop 1815 // rsi: bcp for exception handler 1816 __ push_ptr(rdx); // push exception which is now the only value on the stack 1817 __ jmp(rax); // jump to exception handler (may be _remove_activation_entry!) 1818 1819 // If the exception is not handled in the current frame the frame is removed and 1820 // the exception is rethrown (i.e. exception continuation is _rethrow_exception). 1821 // 1822 // Note: At this point the bci is still the bxi for the instruction which caused 1823 // the exception and the expression stack is empty. Thus, for any VM calls 1824 // at this point, GC will find a legal oop map (with empty expression stack). 1825 1826 // In current activation 1827 // tos: exception 1828 // rsi: exception bcp 1829 1830 // 1831 // JVMTI PopFrame support 1832 // 1833 1834 Interpreter::_remove_activation_preserving_args_entry = __ pc(); 1835 __ empty_expression_stack(); 1836 __ empty_FPU_stack(); 1837 // Set the popframe_processing bit in pending_popframe_condition indicating that we are 1838 // currently handling popframe, so that call_VMs that may happen later do not trigger new 1839 // popframe handling cycles. 1840 __ get_thread(thread); 1841 __ movl(rdx, Address(thread, JavaThread::popframe_condition_offset())); 1842 __ orl(rdx, JavaThread::popframe_processing_bit); 1843 __ movl(Address(thread, JavaThread::popframe_condition_offset()), rdx); 1844 1845 { 1846 // Check to see whether we are returning to a deoptimized frame. 1847 // (The PopFrame call ensures that the caller of the popped frame is 1848 // either interpreted or compiled and deoptimizes it if compiled.) 1849 // In this case, we can't call dispatch_next() after the frame is 1850 // popped, but instead must save the incoming arguments and restore 1851 // them after deoptimization has occurred. 1852 // 1853 // Note that we don't compare the return PC against the 1854 // deoptimization blob's unpack entry because of the presence of 1855 // adapter frames in C2. 1856 Label caller_not_deoptimized; 1857 __ movptr(rdx, Address(rbp, frame::return_addr_offset * wordSize)); 1858 __ super_call_VM_leaf(CAST_FROM_FN_PTR(address, InterpreterRuntime::interpreter_contains), rdx); 1859 __ testl(rax, rax); 1860 __ jcc(Assembler::notZero, caller_not_deoptimized); 1861 1862 // Compute size of arguments for saving when returning to deoptimized caller 1863 __ get_method(rax); 1864 __ movptr(rax, Address(rax, Method::const_offset())); 1865 __ load_unsigned_short(rax, Address(rax, ConstMethod::size_of_parameters_offset())); 1866 __ shlptr(rax, Interpreter::logStackElementSize); 1867 __ restore_locals(); 1868 __ subptr(rdi, rax); 1869 __ addptr(rdi, wordSize); 1870 // Save these arguments 1871 __ get_thread(thread); 1872 __ super_call_VM_leaf(CAST_FROM_FN_PTR(address, Deoptimization::popframe_preserve_args), thread, rax, rdi); 1873 1874 __ remove_activation(vtos, rdx, 1875 /* throw_monitor_exception */ false, 1876 /* install_monitor_exception */ false, 1877 /* notify_jvmdi */ false); 1878 1879 // Inform deoptimization that it is responsible for restoring these arguments 1880 __ get_thread(thread); 1881 __ movl(Address(thread, JavaThread::popframe_condition_offset()), JavaThread::popframe_force_deopt_reexecution_bit); 1882 1883 // Continue in deoptimization handler 1884 __ jmp(rdx); 1885 1886 __ bind(caller_not_deoptimized); 1887 } 1888 1889 __ remove_activation(vtos, rdx, 1890 /* throw_monitor_exception */ false, 1891 /* install_monitor_exception */ false, 1892 /* notify_jvmdi */ false); 1893 1894 // Finish with popframe handling 1895 // A previous I2C followed by a deoptimization might have moved the 1896 // outgoing arguments further up the stack. PopFrame expects the 1897 // mutations to those outgoing arguments to be preserved and other 1898 // constraints basically require this frame to look exactly as 1899 // though it had previously invoked an interpreted activation with 1900 // no space between the top of the expression stack (current 1901 // last_sp) and the top of stack. Rather than force deopt to 1902 // maintain this kind of invariant all the time we call a small 1903 // fixup routine to move the mutated arguments onto the top of our 1904 // expression stack if necessary. 1905 __ mov(rax, rsp); 1906 __ movptr(rbx, Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize)); 1907 __ get_thread(thread); 1908 // PC must point into interpreter here 1909 __ set_last_Java_frame(thread, noreg, rbp, __ pc()); 1910 __ super_call_VM_leaf(CAST_FROM_FN_PTR(address, InterpreterRuntime::popframe_move_outgoing_args), thread, rax, rbx); 1911 __ get_thread(thread); 1912 __ reset_last_Java_frame(thread, true, true); 1913 // Restore the last_sp and null it out 1914 __ movptr(rsp, Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize)); 1915 __ movptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), NULL_WORD); 1916 1917 __ restore_bcp(); 1918 __ restore_locals(); 1919 // The method data pointer was incremented already during 1920 // call profiling. We have to restore the mdp for the current bcp. 1921 if (ProfileInterpreter) { 1922 __ set_method_data_pointer_for_bcp(); 1923 } 1924 1925 // Clear the popframe condition flag 1926 __ get_thread(thread); 1927 __ movl(Address(thread, JavaThread::popframe_condition_offset()), JavaThread::popframe_inactive); 1928 1929 #if INCLUDE_JVMTI 1930 if (EnableInvokeDynamic) { 1931 Label L_done; 1932 const Register local0 = rdi; 1933 1934 __ cmpb(Address(rsi, 0), Bytecodes::_invokestatic); 1935 __ jcc(Assembler::notEqual, L_done); 1936 1937 // The member name argument must be restored if _invokestatic is re-executed after a PopFrame call. 1938 // Detect such a case in the InterpreterRuntime function and return the member name argument, or NULL. 1939 1940 __ get_method(rdx); 1941 __ movptr(rax, Address(local0, 0)); 1942 __ call_VM(rax, CAST_FROM_FN_PTR(address, InterpreterRuntime::member_name_arg_or_null), rax, rdx, rsi); 1943 1944 __ testptr(rax, rax); 1945 __ jcc(Assembler::zero, L_done); 1946 1947 __ movptr(Address(rbx, 0), rax); 1948 __ bind(L_done); 1949 } 1950 #endif // INCLUDE_JVMTI 1951 1952 __ dispatch_next(vtos); 1953 // end of PopFrame support 1954 1955 Interpreter::_remove_activation_entry = __ pc(); 1956 1957 // preserve exception over this code sequence 1958 __ pop_ptr(rax); 1959 __ get_thread(thread); 1960 __ movptr(Address(thread, JavaThread::vm_result_offset()), rax); 1961 // remove the activation (without doing throws on illegalMonitorExceptions) 1962 __ remove_activation(vtos, rdx, false, true, false); 1963 // restore exception 1964 __ get_thread(thread); 1965 __ get_vm_result(rax, thread); 1966 1967 // Inbetween activations - previous activation type unknown yet 1968 // compute continuation point - the continuation point expects 1969 // the following registers set up: 1970 // 1971 // rax: exception 1972 // rdx: return address/pc that threw exception 1973 // rsp: expression stack of caller 1974 // rbp: rbp, of caller 1975 __ push(rax); // save exception 1976 __ push(rdx); // save return address 1977 __ super_call_VM_leaf(CAST_FROM_FN_PTR(address, SharedRuntime::exception_handler_for_return_address), thread, rdx); 1978 __ mov(rbx, rax); // save exception handler 1979 __ pop(rdx); // restore return address 1980 __ pop(rax); // restore exception 1981 // Note that an "issuing PC" is actually the next PC after the call 1982 __ jmp(rbx); // jump to exception handler of caller 1983 } 1984 1985 1986 // 1987 // JVMTI ForceEarlyReturn support 1988 // 1989 address TemplateInterpreterGenerator::generate_earlyret_entry_for(TosState state) { 1990 address entry = __ pc(); 1991 const Register thread = rcx; 1992 1993 __ restore_bcp(); 1994 __ restore_locals(); 1995 __ empty_expression_stack(); 1996 __ empty_FPU_stack(); 1997 __ load_earlyret_value(state); 1998 1999 __ get_thread(thread); 2000 __ movptr(rcx, Address(thread, JavaThread::jvmti_thread_state_offset())); 2001 const Address cond_addr(rcx, JvmtiThreadState::earlyret_state_offset()); 2002 2003 // Clear the earlyret state 2004 __ movl(cond_addr, JvmtiThreadState::earlyret_inactive); 2005 2006 __ remove_activation(state, rsi, 2007 false, /* throw_monitor_exception */ 2008 false, /* install_monitor_exception */ 2009 true); /* notify_jvmdi */ 2010 __ jmp(rsi); 2011 return entry; 2012 } // end of ForceEarlyReturn support 2013 2014 2015 //------------------------------------------------------------------------------------------------------------------------ 2016 // Helper for vtos entry point generation 2017 2018 void TemplateInterpreterGenerator::set_vtos_entry_points (Template* t, address& bep, address& cep, address& sep, address& aep, address& iep, address& lep, address& fep, address& dep, address& vep) { 2019 assert(t->is_valid() && t->tos_in() == vtos, "illegal template"); 2020 Label L; 2021 fep = __ pc(); __ push(ftos); __ jmp(L); 2022 dep = __ pc(); __ push(dtos); __ jmp(L); 2023 lep = __ pc(); __ push(ltos); __ jmp(L); 2024 aep = __ pc(); __ push(atos); __ jmp(L); 2025 bep = cep = sep = // fall through 2026 iep = __ pc(); __ push(itos); // fall through 2027 vep = __ pc(); __ bind(L); // fall through 2028 generate_and_dispatch(t); 2029 } 2030 2031 //------------------------------------------------------------------------------------------------------------------------ 2032 // Generation of individual instructions 2033 2034 // helpers for generate_and_dispatch 2035 2036 2037 2038 InterpreterGenerator::InterpreterGenerator(StubQueue* code) 2039 : TemplateInterpreterGenerator(code) { 2040 generate_all(); // down here so it can be "virtual" 2041 } 2042 2043 //------------------------------------------------------------------------------------------------------------------------ 2044 2045 // Non-product code 2046 #ifndef PRODUCT 2047 address TemplateInterpreterGenerator::generate_trace_code(TosState state) { 2048 address entry = __ pc(); 2049 2050 // prepare expression stack 2051 __ pop(rcx); // pop return address so expression stack is 'pure' 2052 __ push(state); // save tosca 2053 2054 // pass tosca registers as arguments & call tracer 2055 __ call_VM(noreg, CAST_FROM_FN_PTR(address, SharedRuntime::trace_bytecode), rcx, rax, rdx); 2056 __ mov(rcx, rax); // make sure return address is not destroyed by pop(state) 2057 __ pop(state); // restore tosca 2058 2059 // return 2060 __ jmp(rcx); 2061 2062 return entry; 2063 } 2064 2065 2066 void TemplateInterpreterGenerator::count_bytecode() { 2067 __ incrementl(ExternalAddress((address) &BytecodeCounter::_counter_value)); 2068 } 2069 2070 2071 void TemplateInterpreterGenerator::histogram_bytecode(Template* t) { 2072 __ incrementl(ExternalAddress((address) &BytecodeHistogram::_counters[t->bytecode()])); 2073 } 2074 2075 2076 void TemplateInterpreterGenerator::histogram_bytecode_pair(Template* t) { 2077 __ mov32(ExternalAddress((address) &BytecodePairHistogram::_index), rbx); 2078 __ shrl(rbx, BytecodePairHistogram::log2_number_of_codes); 2079 __ orl(rbx, ((int)t->bytecode()) << BytecodePairHistogram::log2_number_of_codes); 2080 ExternalAddress table((address) BytecodePairHistogram::_counters); 2081 Address index(noreg, rbx, Address::times_4); 2082 __ incrementl(ArrayAddress(table, index)); 2083 } 2084 2085 2086 void TemplateInterpreterGenerator::trace_bytecode(Template* t) { 2087 // Call a little run-time stub to avoid blow-up for each bytecode. 2088 // The run-time runtime saves the right registers, depending on 2089 // the tosca in-state for the given template. 2090 assert(Interpreter::trace_code(t->tos_in()) != NULL, 2091 "entry must have been generated"); 2092 __ call(RuntimeAddress(Interpreter::trace_code(t->tos_in()))); 2093 } 2094 2095 2096 void TemplateInterpreterGenerator::stop_interpreter_at() { 2097 Label L; 2098 __ cmp32(ExternalAddress((address) &BytecodeCounter::_counter_value), 2099 StopInterpreterAt); 2100 __ jcc(Assembler::notEqual, L); 2101 __ int3(); 2102 __ bind(L); 2103 } 2104 #endif // !PRODUCT 2105 #endif // CC_INTERP