1 /*
2 * Copyright (c) 2003, 2018, Oracle and/or its affiliates. All rights reserved.
3 * Copyright (c) 2014, Red Hat Inc. All rights reserved.
4 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
5 *
6 * This code is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License version 2 only, as
8 * published by the Free Software Foundation.
9 *
10 * This code is distributed in the hope that it will be useful, but WITHOUT
11 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
13 * version 2 for more details (a copy is included in the LICENSE file that
14 * accompanied this code).
15 *
16 * You should have received a copy of the GNU General Public License version
17 * 2 along with this work; if not, write to the Free Software Foundation,
18 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
19 *
20 * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
21 * or visit www.oracle.com if you need additional information or have any
22 * questions.
23 *
24 */
25
26 #include "precompiled.hpp"
27 #include "gc/shared/barrierSet.hpp"
28 #include "gc/shared/barrierSetAssembler.hpp"
29 #include "interp_masm_aarch64.hpp"
30 #include "interpreter/interpreter.hpp"
31 #include "interpreter/interpreterRuntime.hpp"
32 #include "logging/log.hpp"
33 #include "oops/arrayOop.hpp"
34 #include "oops/markOop.hpp"
35 #include "oops/method.hpp"
36 #include "oops/methodData.hpp"
37 #include "prims/jvmtiExport.hpp"
38 #include "prims/jvmtiThreadState.hpp"
39 #include "runtime/basicLock.hpp"
40 #include "runtime/biasedLocking.hpp"
41 #include "runtime/frame.inline.hpp"
42 #include "runtime/safepointMechanism.hpp"
43 #include "runtime/sharedRuntime.hpp"
44 #include "runtime/thread.inline.hpp"
45
46
47 void InterpreterMacroAssembler::narrow(Register result) {
48
49 // Get method->_constMethod->_result_type
50 ldr(rscratch1, Address(rfp, frame::interpreter_frame_method_offset * wordSize));
51 ldr(rscratch1, Address(rscratch1, Method::const_offset()));
52 ldrb(rscratch1, Address(rscratch1, ConstMethod::result_type_offset()));
53
54 Label done, notBool, notByte, notChar;
55
56 // common case first
57 cmpw(rscratch1, T_INT);
58 br(Assembler::EQ, done);
59
60 // mask integer result to narrower return type.
61 cmpw(rscratch1, T_BOOLEAN);
62 br(Assembler::NE, notBool);
63 andw(result, result, 0x1);
64 b(done);
65
66 bind(notBool);
67 cmpw(rscratch1, T_BYTE);
68 br(Assembler::NE, notByte);
69 sbfx(result, result, 0, 8);
70 b(done);
71
72 bind(notByte);
73 cmpw(rscratch1, T_CHAR);
74 br(Assembler::NE, notChar);
75 ubfx(result, result, 0, 16); // truncate upper 16 bits
76 b(done);
77
78 bind(notChar);
79 sbfx(result, result, 0, 16); // sign-extend short
80
81 // Nothing to do for T_INT
82 bind(done);
83 }
84
85 void InterpreterMacroAssembler::jump_to_entry(address entry) {
86 assert(entry, "Entry must have been generated by now");
87 b(entry);
88 }
89
90 void InterpreterMacroAssembler::check_and_handle_popframe(Register java_thread) {
91 if (JvmtiExport::can_pop_frame()) {
92 Label L;
93 // Initiate popframe handling only if it is not already being
94 // processed. If the flag has the popframe_processing bit set, it
95 // means that this code is called *during* popframe handling - we
96 // don't want to reenter.
97 // This method is only called just after the call into the vm in
98 // call_VM_base, so the arg registers are available.
99 ldrw(rscratch1, Address(rthread, JavaThread::popframe_condition_offset()));
100 tbz(rscratch1, exact_log2(JavaThread::popframe_pending_bit), L);
101 tbnz(rscratch1, exact_log2(JavaThread::popframe_processing_bit), L);
102 // Call Interpreter::remove_activation_preserving_args_entry() to get the
103 // address of the same-named entrypoint in the generated interpreter code.
104 call_VM_leaf(CAST_FROM_FN_PTR(address, Interpreter::remove_activation_preserving_args_entry));
105 br(r0);
106 bind(L);
107 }
108 }
109
110
111 void InterpreterMacroAssembler::load_earlyret_value(TosState state) {
112 ldr(r2, Address(rthread, JavaThread::jvmti_thread_state_offset()));
113 const Address tos_addr(r2, JvmtiThreadState::earlyret_tos_offset());
114 const Address oop_addr(r2, JvmtiThreadState::earlyret_oop_offset());
115 const Address val_addr(r2, JvmtiThreadState::earlyret_value_offset());
116 switch (state) {
117 case atos: ldr(r0, oop_addr);
118 str(zr, oop_addr);
119 verify_oop(r0, state); break;
120 case ltos: ldr(r0, val_addr); break;
121 case btos: // fall through
122 case ztos: // fall through
123 case ctos: // fall through
124 case stos: // fall through
125 case itos: ldrw(r0, val_addr); break;
126 case ftos: ldrs(v0, val_addr); break;
127 case dtos: ldrd(v0, val_addr); break;
128 case vtos: /* nothing to do */ break;
129 default : ShouldNotReachHere();
130 }
131 // Clean up tos value in the thread object
132 movw(rscratch1, (int) ilgl);
133 strw(rscratch1, tos_addr);
134 strw(zr, val_addr);
135 }
136
137
138 void InterpreterMacroAssembler::check_and_handle_earlyret(Register java_thread) {
139 if (JvmtiExport::can_force_early_return()) {
140 Label L;
141 ldr(rscratch1, Address(rthread, JavaThread::jvmti_thread_state_offset()));
142 cbz(rscratch1, L); // if (thread->jvmti_thread_state() == NULL) exit;
143
144 // Initiate earlyret handling only if it is not already being processed.
145 // If the flag has the earlyret_processing bit set, it means that this code
146 // is called *during* earlyret handling - we don't want to reenter.
147 ldrw(rscratch1, Address(rscratch1, JvmtiThreadState::earlyret_state_offset()));
148 cmpw(rscratch1, JvmtiThreadState::earlyret_pending);
149 br(Assembler::NE, L);
150
151 // Call Interpreter::remove_activation_early_entry() to get the address of the
152 // same-named entrypoint in the generated interpreter code.
153 ldr(rscratch1, Address(rthread, JavaThread::jvmti_thread_state_offset()));
154 ldrw(rscratch1, Address(rscratch1, JvmtiThreadState::earlyret_tos_offset()));
155 call_VM_leaf(CAST_FROM_FN_PTR(address, Interpreter::remove_activation_early_entry), rscratch1);
156 br(r0);
157 bind(L);
158 }
159 }
160
161 void InterpreterMacroAssembler::get_unsigned_2_byte_index_at_bcp(
162 Register reg,
163 int bcp_offset) {
164 assert(bcp_offset >= 0, "bcp is still pointing to start of bytecode");
165 ldrh(reg, Address(rbcp, bcp_offset));
166 rev16(reg, reg);
167 }
168
169 void InterpreterMacroAssembler::get_dispatch() {
170 unsigned long offset;
171 adrp(rdispatch, ExternalAddress((address)Interpreter::dispatch_table()), offset);
172 lea(rdispatch, Address(rdispatch, offset));
173 }
174
175 void InterpreterMacroAssembler::get_cache_index_at_bcp(Register index,
176 int bcp_offset,
177 size_t index_size) {
178 assert(bcp_offset > 0, "bcp is still pointing to start of bytecode");
179 if (index_size == sizeof(u2)) {
180 load_unsigned_short(index, Address(rbcp, bcp_offset));
181 } else if (index_size == sizeof(u4)) {
182 // assert(EnableInvokeDynamic, "giant index used only for JSR 292");
183 ldrw(index, Address(rbcp, bcp_offset));
184 // Check if the secondary index definition is still ~x, otherwise
185 // we have to change the following assembler code to calculate the
186 // plain index.
187 assert(ConstantPool::decode_invokedynamic_index(~123) == 123, "else change next line");
188 eonw(index, index, zr); // convert to plain index
189 } else if (index_size == sizeof(u1)) {
190 load_unsigned_byte(index, Address(rbcp, bcp_offset));
191 } else {
192 ShouldNotReachHere();
193 }
194 }
195
196 // Return
197 // Rindex: index into constant pool
198 // Rcache: address of cache entry - ConstantPoolCache::base_offset()
199 //
200 // A caller must add ConstantPoolCache::base_offset() to Rcache to get
201 // the true address of the cache entry.
202 //
203 void InterpreterMacroAssembler::get_cache_and_index_at_bcp(Register cache,
204 Register index,
205 int bcp_offset,
206 size_t index_size) {
207 assert_different_registers(cache, index);
208 assert_different_registers(cache, rcpool);
209 get_cache_index_at_bcp(index, bcp_offset, index_size);
210 assert(sizeof(ConstantPoolCacheEntry) == 4 * wordSize, "adjust code below");
211 // convert from field index to ConstantPoolCacheEntry
212 // aarch64 already has the cache in rcpool so there is no need to
213 // install it in cache. instead we pre-add the indexed offset to
214 // rcpool and return it in cache. All clients of this method need to
215 // be modified accordingly.
216 add(cache, rcpool, index, Assembler::LSL, 5);
217 }
218
219
220 void InterpreterMacroAssembler::get_cache_and_index_and_bytecode_at_bcp(Register cache,
221 Register index,
222 Register bytecode,
223 int byte_no,
224 int bcp_offset,
225 size_t index_size) {
226 get_cache_and_index_at_bcp(cache, index, bcp_offset, index_size);
227 // We use a 32-bit load here since the layout of 64-bit words on
228 // little-endian machines allow us that.
229 // n.b. unlike x86 cache already includes the index offset
230 lea(bytecode, Address(cache,
231 ConstantPoolCache::base_offset()
232 + ConstantPoolCacheEntry::indices_offset()));
233 ldarw(bytecode, bytecode);
234 const int shift_count = (1 + byte_no) * BitsPerByte;
235 ubfx(bytecode, bytecode, shift_count, BitsPerByte);
236 }
237
238 void InterpreterMacroAssembler::get_cache_entry_pointer_at_bcp(Register cache,
239 Register tmp,
240 int bcp_offset,
241 size_t index_size) {
242 assert(cache != tmp, "must use different register");
243 get_cache_index_at_bcp(tmp, bcp_offset, index_size);
244 assert(sizeof(ConstantPoolCacheEntry) == 4 * wordSize, "adjust code below");
245 // convert from field index to ConstantPoolCacheEntry index
246 // and from word offset to byte offset
247 assert(exact_log2(in_bytes(ConstantPoolCacheEntry::size_in_bytes())) == 2 + LogBytesPerWord, "else change next line");
248 ldr(cache, Address(rfp, frame::interpreter_frame_cache_offset * wordSize));
249 // skip past the header
250 add(cache, cache, in_bytes(ConstantPoolCache::base_offset()));
251 add(cache, cache, tmp, Assembler::LSL, 2 + LogBytesPerWord); // construct pointer to cache entry
252 }
253
254 void InterpreterMacroAssembler::get_method_counters(Register method,
255 Register mcs, Label& skip) {
256 Label has_counters;
257 ldr(mcs, Address(method, Method::method_counters_offset()));
258 cbnz(mcs, has_counters);
259 call_VM(noreg, CAST_FROM_FN_PTR(address,
260 InterpreterRuntime::build_method_counters), method);
261 ldr(mcs, Address(method, Method::method_counters_offset()));
262 cbz(mcs, skip); // No MethodCounters allocated, OutOfMemory
263 bind(has_counters);
264 }
265
266 // Load object from cpool->resolved_references(index)
267 void InterpreterMacroAssembler::load_resolved_reference_at_index(
268 Register result, Register index, Register tmp) {
269 assert_different_registers(result, index);
270 // convert from field index to resolved_references() index and from
271 // word index to byte offset. Since this is a java object, it can be compressed
272 lslw(index, index, LogBytesPerHeapOop);
273
274 get_constant_pool(result);
275 // load pointer for resolved_references[] objArray
276 ldr(result, Address(result, ConstantPool::cache_offset_in_bytes()));
277 ldr(result, Address(result, ConstantPoolCache::resolved_references_offset_in_bytes()));
278 resolve_oop_handle(result, tmp);
279 // Add in the index
280 add(result, result, index);
281 BarrierSetAssembler *bs = BarrierSet::barrier_set()->barrier_set_assembler();
282 bs->load_at(this, IN_HEAP, T_OBJECT, result, Address(result, arrayOopDesc::base_offset_in_bytes(T_OBJECT)), tmp, /*tmp_thread*/ noreg);
283 }
284
285 void InterpreterMacroAssembler::load_resolved_klass_at_offset(
286 Register cpool, Register index, Register klass, Register temp) {
287 add(temp, cpool, index, LSL, LogBytesPerWord);
288 ldrh(temp, Address(temp, sizeof(ConstantPool))); // temp = resolved_klass_index
289 ldr(klass, Address(cpool, ConstantPool::resolved_klasses_offset_in_bytes())); // klass = cpool->_resolved_klasses
290 add(klass, klass, temp, LSL, LogBytesPerWord);
291 ldr(klass, Address(klass, Array<Klass*>::base_offset_in_bytes()));
292 }
293
294 // Generate a subtype check: branch to ok_is_subtype if sub_klass is a
295 // subtype of super_klass.
296 //
297 // Args:
298 // r0: superklass
299 // Rsub_klass: subklass
300 //
301 // Kills:
302 // r2, r5
303 void InterpreterMacroAssembler::gen_subtype_check(Register Rsub_klass,
304 Label& ok_is_subtype) {
305 assert(Rsub_klass != r0, "r0 holds superklass");
306 assert(Rsub_klass != r2, "r2 holds 2ndary super array length");
307 assert(Rsub_klass != r5, "r5 holds 2ndary super array scan ptr");
308
309 // Profile the not-null value's klass.
310 profile_typecheck(r2, Rsub_klass, r5); // blows r2, reloads r5
311
312 // Do the check.
313 check_klass_subtype(Rsub_klass, r0, r2, ok_is_subtype); // blows r2
314
315 // Profile the failure of the check.
316 profile_typecheck_failed(r2); // blows r2
317 }
318
319 // Java Expression Stack
320
321 void InterpreterMacroAssembler::pop_ptr(Register r) {
322 ldr(r, post(esp, wordSize));
323 }
324
325 void InterpreterMacroAssembler::pop_i(Register r) {
326 ldrw(r, post(esp, wordSize));
327 }
328
329 void InterpreterMacroAssembler::pop_l(Register r) {
330 ldr(r, post(esp, 2 * Interpreter::stackElementSize));
331 }
332
333 void InterpreterMacroAssembler::push_ptr(Register r) {
334 str(r, pre(esp, -wordSize));
335 }
336
337 void InterpreterMacroAssembler::push_i(Register r) {
338 str(r, pre(esp, -wordSize));
339 }
340
341 void InterpreterMacroAssembler::push_l(Register r) {
342 str(zr, pre(esp, -wordSize));
343 str(r, pre(esp, - wordSize));
344 }
345
346 void InterpreterMacroAssembler::pop_f(FloatRegister r) {
347 ldrs(r, post(esp, wordSize));
348 }
349
350 void InterpreterMacroAssembler::pop_d(FloatRegister r) {
351 ldrd(r, post(esp, 2 * Interpreter::stackElementSize));
352 }
353
354 void InterpreterMacroAssembler::push_f(FloatRegister r) {
355 strs(r, pre(esp, -wordSize));
356 }
357
358 void InterpreterMacroAssembler::push_d(FloatRegister r) {
359 strd(r, pre(esp, 2* -wordSize));
360 }
361
362 void InterpreterMacroAssembler::pop(TosState state) {
363 switch (state) {
364 case atos: pop_ptr(); break;
365 case btos:
366 case ztos:
367 case ctos:
368 case stos:
369 case itos: pop_i(); break;
370 case ltos: pop_l(); break;
371 case ftos: pop_f(); break;
372 case dtos: pop_d(); break;
373 case vtos: /* nothing to do */ break;
374 default: ShouldNotReachHere();
375 }
376 verify_oop(r0, state);
377 }
378
379 void InterpreterMacroAssembler::push(TosState state) {
380 verify_oop(r0, state);
381 switch (state) {
382 case atos: push_ptr(); break;
383 case btos:
384 case ztos:
385 case ctos:
386 case stos:
387 case itos: push_i(); break;
388 case ltos: push_l(); break;
389 case ftos: push_f(); break;
390 case dtos: push_d(); break;
391 case vtos: /* nothing to do */ break;
392 default : ShouldNotReachHere();
393 }
394 }
395
396 // Helpers for swap and dup
397 void InterpreterMacroAssembler::load_ptr(int n, Register val) {
398 ldr(val, Address(esp, Interpreter::expr_offset_in_bytes(n)));
399 }
400
401 void InterpreterMacroAssembler::store_ptr(int n, Register val) {
402 str(val, Address(esp, Interpreter::expr_offset_in_bytes(n)));
403 }
404
405 void InterpreterMacroAssembler::load_float(Address src) {
406 ldrs(v0, src);
407 }
408
409 void InterpreterMacroAssembler::load_double(Address src) {
410 ldrd(v0, src);
411 }
412
413 void InterpreterMacroAssembler::prepare_to_jump_from_interpreted() {
414 // set sender sp
415 mov(r13, sp);
416 // record last_sp
417 str(esp, Address(rfp, frame::interpreter_frame_last_sp_offset * wordSize));
418 }
419
420 // Jump to from_interpreted entry of a call unless single stepping is possible
421 // in this thread in which case we must call the i2i entry
422 void InterpreterMacroAssembler::jump_from_interpreted(Register method, Register temp) {
423 prepare_to_jump_from_interpreted();
424
425 if (JvmtiExport::can_post_interpreter_events()) {
426 Label run_compiled_code;
427 // JVMTI events, such as single-stepping, are implemented partly by avoiding running
428 // compiled code in threads for which the event is enabled. Check here for
429 // interp_only_mode if these events CAN be enabled.
430 ldrw(rscratch1, Address(rthread, JavaThread::interp_only_mode_offset()));
431 cbzw(rscratch1, run_compiled_code);
432 ldr(rscratch1, Address(method, Method::interpreter_entry_offset()));
433 br(rscratch1);
434 bind(run_compiled_code);
435 }
436
437 ldr(rscratch1, Address(method, Method::from_interpreted_offset()));
438 br(rscratch1);
439 }
440
441 // The following two routines provide a hook so that an implementation
442 // can schedule the dispatch in two parts. amd64 does not do this.
443 void InterpreterMacroAssembler::dispatch_prolog(TosState state, int step) {
444 }
445
446 void InterpreterMacroAssembler::dispatch_epilog(TosState state, int step) {
447 dispatch_next(state, step);
448 }
449
450 void InterpreterMacroAssembler::dispatch_base(TosState state,
451 address* table,
452 bool verifyoop,
453 bool generate_poll) {
454 if (VerifyActivationFrameSize) {
455 Unimplemented();
456 }
457 if (verifyoop) {
458 verify_oop(r0, state);
459 }
460
461 Label safepoint;
462 address* const safepoint_table = Interpreter::safept_table(state);
463 bool needs_thread_local_poll = generate_poll &&
464 SafepointMechanism::uses_thread_local_poll() && table != safepoint_table;
465
466 if (needs_thread_local_poll) {
467 NOT_PRODUCT(block_comment("Thread-local Safepoint poll"));
468 ldr(rscratch2, Address(rthread, Thread::polling_page_offset()));
469 tbnz(rscratch2, exact_log2(SafepointMechanism::poll_bit()), safepoint);
470 }
471
472 if (table == Interpreter::dispatch_table(state)) {
473 addw(rscratch2, rscratch1, Interpreter::distance_from_dispatch_table(state));
474 ldr(rscratch2, Address(rdispatch, rscratch2, Address::uxtw(3)));
475 } else {
476 mov(rscratch2, (address)table);
477 ldr(rscratch2, Address(rscratch2, rscratch1, Address::uxtw(3)));
478 }
479 br(rscratch2);
480
481 if (needs_thread_local_poll) {
482 bind(safepoint);
483 lea(rscratch2, ExternalAddress((address)safepoint_table));
484 ldr(rscratch2, Address(rscratch2, rscratch1, Address::uxtw(3)));
485 br(rscratch2);
486 }
487 }
488
489 void InterpreterMacroAssembler::dispatch_only(TosState state, bool generate_poll) {
490 dispatch_base(state, Interpreter::dispatch_table(state), true, generate_poll);
491 }
492
493 void InterpreterMacroAssembler::dispatch_only_normal(TosState state) {
494 dispatch_base(state, Interpreter::normal_table(state));
495 }
496
497 void InterpreterMacroAssembler::dispatch_only_noverify(TosState state) {
498 dispatch_base(state, Interpreter::normal_table(state), false);
499 }
500
501
502 void InterpreterMacroAssembler::dispatch_next(TosState state, int step, bool generate_poll) {
503 // load next bytecode
504 ldrb(rscratch1, Address(pre(rbcp, step)));
505 dispatch_base(state, Interpreter::dispatch_table(state), generate_poll);
506 }
507
508 void InterpreterMacroAssembler::dispatch_via(TosState state, address* table) {
509 // load current bytecode
510 ldrb(rscratch1, Address(rbcp, 0));
511 dispatch_base(state, table);
512 }
513
514 // remove activation
515 //
516 // Unlock the receiver if this is a synchronized method.
517 // Unlock any Java monitors from syncronized blocks.
518 // Remove the activation from the stack.
519 //
520 // If there are locked Java monitors
521 // If throw_monitor_exception
522 // throws IllegalMonitorStateException
523 // Else if install_monitor_exception
524 // installs IllegalMonitorStateException
525 // Else
526 // no error processing
527 void InterpreterMacroAssembler::remove_activation(
528 TosState state,
529 bool throw_monitor_exception,
530 bool install_monitor_exception,
531 bool notify_jvmdi) {
532 // Note: Registers r3 xmm0 may be in use for the
533 // result check if synchronized method
534 Label unlocked, unlock, no_unlock;
535
536 // get the value of _do_not_unlock_if_synchronized into r3
537 const Address do_not_unlock_if_synchronized(rthread,
538 in_bytes(JavaThread::do_not_unlock_if_synchronized_offset()));
539 ldrb(r3, do_not_unlock_if_synchronized);
540 strb(zr, do_not_unlock_if_synchronized); // reset the flag
541
542 // get method access flags
543 ldr(r1, Address(rfp, frame::interpreter_frame_method_offset * wordSize));
544 ldr(r2, Address(r1, Method::access_flags_offset()));
545 tbz(r2, exact_log2(JVM_ACC_SYNCHRONIZED), unlocked);
546
547 // Don't unlock anything if the _do_not_unlock_if_synchronized flag
548 // is set.
549 cbnz(r3, no_unlock);
550
551 // unlock monitor
552 push(state); // save result
553
554 // BasicObjectLock will be first in list, since this is a
555 // synchronized method. However, need to check that the object has
556 // not been unlocked by an explicit monitorexit bytecode.
557 const Address monitor(rfp, frame::interpreter_frame_initial_sp_offset *
558 wordSize - (int) sizeof(BasicObjectLock));
559 // We use c_rarg1 so that if we go slow path it will be the correct
560 // register for unlock_object to pass to VM directly
561 lea(c_rarg1, monitor); // address of first monitor
562
563 ldr(r0, Address(c_rarg1, BasicObjectLock::obj_offset_in_bytes()));
564 cbnz(r0, unlock);
565
566 pop(state);
567 if (throw_monitor_exception) {
568 // Entry already unlocked, need to throw exception
569 call_VM(noreg, CAST_FROM_FN_PTR(address,
570 InterpreterRuntime::throw_illegal_monitor_state_exception));
571 should_not_reach_here();
572 } else {
573 // Monitor already unlocked during a stack unroll. If requested,
574 // install an illegal_monitor_state_exception. Continue with
575 // stack unrolling.
576 if (install_monitor_exception) {
577 call_VM(noreg, CAST_FROM_FN_PTR(address,
578 InterpreterRuntime::new_illegal_monitor_state_exception));
579 }
580 b(unlocked);
581 }
582
583 bind(unlock);
584 unlock_object(c_rarg1);
585 pop(state);
586
587 // Check that for block-structured locking (i.e., that all locked
588 // objects has been unlocked)
589 bind(unlocked);
590
591 // r0: Might contain return value
592
593 // Check that all monitors are unlocked
594 {
595 Label loop, exception, entry, restart;
596 const int entry_size = frame::interpreter_frame_monitor_size() * wordSize;
597 const Address monitor_block_top(
598 rfp, frame::interpreter_frame_monitor_block_top_offset * wordSize);
599 const Address monitor_block_bot(
600 rfp, frame::interpreter_frame_initial_sp_offset * wordSize);
601
602 bind(restart);
603 // We use c_rarg1 so that if we go slow path it will be the correct
604 // register for unlock_object to pass to VM directly
605 ldr(c_rarg1, monitor_block_top); // points to current entry, starting
606 // with top-most entry
607 lea(r19, monitor_block_bot); // points to word before bottom of
608 // monitor block
609 b(entry);
610
611 // Entry already locked, need to throw exception
612 bind(exception);
613
614 if (throw_monitor_exception) {
615 // Throw exception
616 MacroAssembler::call_VM(noreg,
617 CAST_FROM_FN_PTR(address, InterpreterRuntime::
618 throw_illegal_monitor_state_exception));
619 should_not_reach_here();
620 } else {
621 // Stack unrolling. Unlock object and install illegal_monitor_exception.
622 // Unlock does not block, so don't have to worry about the frame.
623 // We don't have to preserve c_rarg1 since we are going to throw an exception.
624
625 push(state);
626 unlock_object(c_rarg1);
627 pop(state);
628
629 if (install_monitor_exception) {
630 call_VM(noreg, CAST_FROM_FN_PTR(address,
631 InterpreterRuntime::
632 new_illegal_monitor_state_exception));
633 }
634
635 b(restart);
636 }
637
638 bind(loop);
639 // check if current entry is used
640 ldr(rscratch1, Address(c_rarg1, BasicObjectLock::obj_offset_in_bytes()));
641 cbnz(rscratch1, exception);
642
643 add(c_rarg1, c_rarg1, entry_size); // otherwise advance to next entry
644 bind(entry);
645 cmp(c_rarg1, r19); // check if bottom reached
646 br(Assembler::NE, loop); // if not at bottom then check this entry
647 }
648
649 bind(no_unlock);
650
651 // jvmti support
652 if (notify_jvmdi) {
653 notify_method_exit(state, NotifyJVMTI); // preserve TOSCA
654 } else {
655 notify_method_exit(state, SkipNotifyJVMTI); // preserve TOSCA
656 }
657
658 // remove activation
659 // get sender esp
660 ldr(esp,
661 Address(rfp, frame::interpreter_frame_sender_sp_offset * wordSize));
662 if (StackReservedPages > 0) {
663 // testing if reserved zone needs to be re-enabled
664 Label no_reserved_zone_enabling;
665
666 ldr(rscratch1, Address(rthread, JavaThread::reserved_stack_activation_offset()));
667 cmp(esp, rscratch1);
668 br(Assembler::LS, no_reserved_zone_enabling);
669
670 call_VM_leaf(
671 CAST_FROM_FN_PTR(address, SharedRuntime::enable_stack_reserved_zone), rthread);
672 call_VM(noreg, CAST_FROM_FN_PTR(address,
673 InterpreterRuntime::throw_delayed_StackOverflowError));
674 should_not_reach_here();
675
676 bind(no_reserved_zone_enabling);
677 }
678 // remove frame anchor
679 leave();
680 // If we're returning to interpreted code we will shortly be
681 // adjusting SP to allow some space for ESP. If we're returning to
682 // compiled code the saved sender SP was saved in sender_sp, so this
683 // restores it.
684 andr(sp, esp, -16);
685 }
686
687 // Lock object
688 //
689 // Args:
690 // c_rarg1: BasicObjectLock to be used for locking
691 //
692 // Kills:
693 // r0
694 // c_rarg0, c_rarg1, c_rarg2, c_rarg3, .. (param regs)
695 // rscratch1, rscratch2 (scratch regs)
696 void InterpreterMacroAssembler::lock_object(Register lock_reg)
697 {
698 assert(lock_reg == c_rarg1, "The argument is only for looks. It must be c_rarg1");
699 if (UseHeavyMonitors) {
700 call_VM(noreg,
701 CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorenter),
702 lock_reg);
703 } else {
704 Label done;
705
706 const Register swap_reg = r0;
707 const Register tmp = c_rarg2;
708 const Register obj_reg = c_rarg3; // Will contain the oop
709
710 const int obj_offset = BasicObjectLock::obj_offset_in_bytes();
711 const int lock_offset = BasicObjectLock::lock_offset_in_bytes ();
712 const int mark_offset = lock_offset +
713 BasicLock::displaced_header_offset_in_bytes();
714
715 Label slow_case;
716
717 // Load object pointer into obj_reg %c_rarg3
718 ldr(obj_reg, Address(lock_reg, obj_offset));
719
720 if (UseBiasedLocking) {
721 biased_locking_enter(lock_reg, obj_reg, swap_reg, tmp, false, done, &slow_case);
722 }
723
724 // Load (object->mark() | 1) into swap_reg
725 ldr(rscratch1, Address(obj_reg, oopDesc::mark_offset_in_bytes()));
726 orr(swap_reg, rscratch1, 1);
727
728 // Save (object->mark() | 1) into BasicLock's displaced header
729 str(swap_reg, Address(lock_reg, mark_offset));
730
731 assert(lock_offset == 0,
732 "displached header must be first word in BasicObjectLock");
733
734 Label fail;
735 if (PrintBiasedLockingStatistics) {
736 Label fast;
737 cmpxchg_obj_header(swap_reg, lock_reg, obj_reg, rscratch1, fast, &fail);
738 bind(fast);
739 atomic_incw(Address((address)BiasedLocking::fast_path_entry_count_addr()),
740 rscratch2, rscratch1, tmp);
741 b(done);
742 bind(fail);
743 } else {
744 cmpxchg_obj_header(swap_reg, lock_reg, obj_reg, rscratch1, done, /*fallthrough*/NULL);
745 }
746
747 // Test if the oopMark is an obvious stack pointer, i.e.,
748 // 1) (mark & 7) == 0, and
749 // 2) rsp <= mark < mark + os::pagesize()
750 //
751 // These 3 tests can be done by evaluating the following
752 // expression: ((mark - rsp) & (7 - os::vm_page_size())),
753 // assuming both stack pointer and pagesize have their
754 // least significant 3 bits clear.
755 // NOTE: the oopMark is in swap_reg %r0 as the result of cmpxchg
756 // NOTE2: aarch64 does not like to subtract sp from rn so take a
757 // copy
758 mov(rscratch1, sp);
759 sub(swap_reg, swap_reg, rscratch1);
760 ands(swap_reg, swap_reg, (unsigned long)(7 - os::vm_page_size()));
761
762 // Save the test result, for recursive case, the result is zero
763 str(swap_reg, Address(lock_reg, mark_offset));
764
765 if (PrintBiasedLockingStatistics) {
766 br(Assembler::NE, slow_case);
767 atomic_incw(Address((address)BiasedLocking::fast_path_entry_count_addr()),
768 rscratch2, rscratch1, tmp);
769 }
770 br(Assembler::EQ, done);
771
772 bind(slow_case);
773
774 // Call the runtime routine for slow case
775 call_VM(noreg,
776 CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorenter),
777 lock_reg);
778
779 bind(done);
780 }
781 }
782
783
784 // Unlocks an object. Used in monitorexit bytecode and
785 // remove_activation. Throws an IllegalMonitorException if object is
786 // not locked by current thread.
787 //
788 // Args:
789 // c_rarg1: BasicObjectLock for lock
790 //
791 // Kills:
792 // r0
793 // c_rarg0, c_rarg1, c_rarg2, c_rarg3, ... (param regs)
794 // rscratch1, rscratch2 (scratch regs)
795 void InterpreterMacroAssembler::unlock_object(Register lock_reg)
796 {
797 assert(lock_reg == c_rarg1, "The argument is only for looks. It must be rarg1");
798
799 if (UseHeavyMonitors) {
800 call_VM(noreg,
801 CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorexit),
802 lock_reg);
803 } else {
804 Label done;
805
806 const Register swap_reg = r0;
807 const Register header_reg = c_rarg2; // Will contain the old oopMark
808 const Register obj_reg = c_rarg3; // Will contain the oop
809
810 save_bcp(); // Save in case of exception
811
812 // Convert from BasicObjectLock structure to object and BasicLock
813 // structure Store the BasicLock address into %r0
814 lea(swap_reg, Address(lock_reg, BasicObjectLock::lock_offset_in_bytes()));
815
816 // Load oop into obj_reg(%c_rarg3)
817 ldr(obj_reg, Address(lock_reg, BasicObjectLock::obj_offset_in_bytes()));
818
819 // Free entry
820 str(zr, Address(lock_reg, BasicObjectLock::obj_offset_in_bytes()));
821
822 if (UseBiasedLocking) {
823 biased_locking_exit(obj_reg, header_reg, done);
824 }
825
826 // Load the old header from BasicLock structure
827 ldr(header_reg, Address(swap_reg,
828 BasicLock::displaced_header_offset_in_bytes()));
829
830 // Test for recursion
831 cbz(header_reg, done);
832
833 // Atomic swap back the old header
834 cmpxchg_obj_header(swap_reg, header_reg, obj_reg, rscratch1, done, /*fallthrough*/NULL);
835
836 // Call the runtime routine for slow case.
837 str(obj_reg, Address(lock_reg, BasicObjectLock::obj_offset_in_bytes())); // restore obj
838 call_VM(noreg,
839 CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorexit),
840 lock_reg);
841
842 bind(done);
843
844 restore_bcp();
845 }
846 }
847
848 void InterpreterMacroAssembler::test_method_data_pointer(Register mdp,
849 Label& zero_continue) {
850 assert(ProfileInterpreter, "must be profiling interpreter");
851 ldr(mdp, Address(rfp, frame::interpreter_frame_mdp_offset * wordSize));
852 cbz(mdp, zero_continue);
853 }
854
855 // Set the method data pointer for the current bcp.
856 void InterpreterMacroAssembler::set_method_data_pointer_for_bcp() {
857 assert(ProfileInterpreter, "must be profiling interpreter");
858 Label set_mdp;
859 stp(r0, r1, Address(pre(sp, -2 * wordSize)));
860
861 // Test MDO to avoid the call if it is NULL.
862 ldr(r0, Address(rmethod, in_bytes(Method::method_data_offset())));
863 cbz(r0, set_mdp);
864 call_VM_leaf(CAST_FROM_FN_PTR(address, InterpreterRuntime::bcp_to_di), rmethod, rbcp);
865 // r0: mdi
866 // mdo is guaranteed to be non-zero here, we checked for it before the call.
867 ldr(r1, Address(rmethod, in_bytes(Method::method_data_offset())));
868 lea(r1, Address(r1, in_bytes(MethodData::data_offset())));
869 add(r0, r1, r0);
870 str(r0, Address(rfp, frame::interpreter_frame_mdp_offset * wordSize));
871 bind(set_mdp);
872 ldp(r0, r1, Address(post(sp, 2 * wordSize)));
873 }
874
875 void InterpreterMacroAssembler::verify_method_data_pointer() {
876 assert(ProfileInterpreter, "must be profiling interpreter");
877 #ifdef ASSERT
878 Label verify_continue;
879 stp(r0, r1, Address(pre(sp, -2 * wordSize)));
880 stp(r2, r3, Address(pre(sp, -2 * wordSize)));
881 test_method_data_pointer(r3, verify_continue); // If mdp is zero, continue
882 get_method(r1);
883
884 // If the mdp is valid, it will point to a DataLayout header which is
885 // consistent with the bcp. The converse is highly probable also.
886 ldrsh(r2, Address(r3, in_bytes(DataLayout::bci_offset())));
887 ldr(rscratch1, Address(r1, Method::const_offset()));
888 add(r2, r2, rscratch1, Assembler::LSL);
889 lea(r2, Address(r2, ConstMethod::codes_offset()));
890 cmp(r2, rbcp);
891 br(Assembler::EQ, verify_continue);
892 // r1: method
893 // rbcp: bcp // rbcp == 22
894 // r3: mdp
895 call_VM_leaf(CAST_FROM_FN_PTR(address, InterpreterRuntime::verify_mdp),
896 r1, rbcp, r3);
897 bind(verify_continue);
898 ldp(r2, r3, Address(post(sp, 2 * wordSize)));
899 ldp(r0, r1, Address(post(sp, 2 * wordSize)));
900 #endif // ASSERT
901 }
902
903
904 void InterpreterMacroAssembler::set_mdp_data_at(Register mdp_in,
905 int constant,
906 Register value) {
907 assert(ProfileInterpreter, "must be profiling interpreter");
908 Address data(mdp_in, constant);
909 str(value, data);
910 }
911
912
913 void InterpreterMacroAssembler::increment_mdp_data_at(Register mdp_in,
914 int constant,
915 bool decrement) {
916 increment_mdp_data_at(mdp_in, noreg, constant, decrement);
917 }
918
919 void InterpreterMacroAssembler::increment_mdp_data_at(Register mdp_in,
920 Register reg,
921 int constant,
922 bool decrement) {
923 assert(ProfileInterpreter, "must be profiling interpreter");
924 // %%% this does 64bit counters at best it is wasting space
925 // at worst it is a rare bug when counters overflow
926
927 assert_different_registers(rscratch2, rscratch1, mdp_in, reg);
928
929 Address addr1(mdp_in, constant);
930 Address addr2(rscratch2, reg, Address::lsl(0));
931 Address &addr = addr1;
932 if (reg != noreg) {
933 lea(rscratch2, addr1);
934 addr = addr2;
935 }
936
937 if (decrement) {
938 // Decrement the register. Set condition codes.
939 // Intel does this
940 // addptr(data, (int32_t) -DataLayout::counter_increment);
941 // If the decrement causes the counter to overflow, stay negative
942 // Label L;
943 // jcc(Assembler::negative, L);
944 // addptr(data, (int32_t) DataLayout::counter_increment);
945 // so we do this
946 ldr(rscratch1, addr);
947 subs(rscratch1, rscratch1, (unsigned)DataLayout::counter_increment);
948 Label L;
949 br(Assembler::LO, L); // skip store if counter underflow
950 str(rscratch1, addr);
951 bind(L);
952 } else {
953 assert(DataLayout::counter_increment == 1,
954 "flow-free idiom only works with 1");
955 // Intel does this
956 // Increment the register. Set carry flag.
957 // addptr(data, DataLayout::counter_increment);
958 // If the increment causes the counter to overflow, pull back by 1.
959 // sbbptr(data, (int32_t)0);
960 // so we do this
961 ldr(rscratch1, addr);
962 adds(rscratch1, rscratch1, DataLayout::counter_increment);
963 Label L;
964 br(Assembler::CS, L); // skip store if counter overflow
965 str(rscratch1, addr);
966 bind(L);
967 }
968 }
969
970 void InterpreterMacroAssembler::set_mdp_flag_at(Register mdp_in,
971 int flag_byte_constant) {
972 assert(ProfileInterpreter, "must be profiling interpreter");
973 int flags_offset = in_bytes(DataLayout::flags_offset());
974 // Set the flag
975 ldrb(rscratch1, Address(mdp_in, flags_offset));
976 orr(rscratch1, rscratch1, flag_byte_constant);
977 strb(rscratch1, Address(mdp_in, flags_offset));
978 }
979
980
981 void InterpreterMacroAssembler::test_mdp_data_at(Register mdp_in,
982 int offset,
983 Register value,
984 Register test_value_out,
985 Label& not_equal_continue) {
986 assert(ProfileInterpreter, "must be profiling interpreter");
987 if (test_value_out == noreg) {
988 ldr(rscratch1, Address(mdp_in, offset));
989 cmp(value, rscratch1);
990 } else {
991 // Put the test value into a register, so caller can use it:
992 ldr(test_value_out, Address(mdp_in, offset));
993 cmp(value, test_value_out);
994 }
995 br(Assembler::NE, not_equal_continue);
996 }
997
998
999 void InterpreterMacroAssembler::update_mdp_by_offset(Register mdp_in,
1000 int offset_of_disp) {
1001 assert(ProfileInterpreter, "must be profiling interpreter");
1002 ldr(rscratch1, Address(mdp_in, offset_of_disp));
1003 add(mdp_in, mdp_in, rscratch1, LSL);
1004 str(mdp_in, Address(rfp, frame::interpreter_frame_mdp_offset * wordSize));
1005 }
1006
1007
1008 void InterpreterMacroAssembler::update_mdp_by_offset(Register mdp_in,
1009 Register reg,
1010 int offset_of_disp) {
1011 assert(ProfileInterpreter, "must be profiling interpreter");
1012 lea(rscratch1, Address(mdp_in, offset_of_disp));
1013 ldr(rscratch1, Address(rscratch1, reg, Address::lsl(0)));
1014 add(mdp_in, mdp_in, rscratch1, LSL);
1015 str(mdp_in, Address(rfp, frame::interpreter_frame_mdp_offset * wordSize));
1016 }
1017
1018
1019 void InterpreterMacroAssembler::update_mdp_by_constant(Register mdp_in,
1020 int constant) {
1021 assert(ProfileInterpreter, "must be profiling interpreter");
1022 add(mdp_in, mdp_in, (unsigned)constant);
1023 str(mdp_in, Address(rfp, frame::interpreter_frame_mdp_offset * wordSize));
1024 }
1025
1026
1027 void InterpreterMacroAssembler::update_mdp_for_ret(Register return_bci) {
1028 assert(ProfileInterpreter, "must be profiling interpreter");
1029 // save/restore across call_VM
1030 stp(zr, return_bci, Address(pre(sp, -2 * wordSize)));
1031 call_VM(noreg,
1032 CAST_FROM_FN_PTR(address, InterpreterRuntime::update_mdp_for_ret),
1033 return_bci);
1034 ldp(zr, return_bci, Address(post(sp, 2 * wordSize)));
1035 }
1036
1037
1038 void InterpreterMacroAssembler::profile_taken_branch(Register mdp,
1039 Register bumped_count) {
1040 if (ProfileInterpreter) {
1041 Label profile_continue;
1042
1043 // If no method data exists, go to profile_continue.
1044 // Otherwise, assign to mdp
1045 test_method_data_pointer(mdp, profile_continue);
1046
1047 // We are taking a branch. Increment the taken count.
1048 // We inline increment_mdp_data_at to return bumped_count in a register
1049 //increment_mdp_data_at(mdp, in_bytes(JumpData::taken_offset()));
1050 Address data(mdp, in_bytes(JumpData::taken_offset()));
1051 ldr(bumped_count, data);
1052 assert(DataLayout::counter_increment == 1,
1053 "flow-free idiom only works with 1");
1054 // Intel does this to catch overflow
1055 // addptr(bumped_count, DataLayout::counter_increment);
1056 // sbbptr(bumped_count, 0);
1057 // so we do this
1058 adds(bumped_count, bumped_count, DataLayout::counter_increment);
1059 Label L;
1060 br(Assembler::CS, L); // skip store if counter overflow
1061 str(bumped_count, data);
1062 bind(L);
1063 // The method data pointer needs to be updated to reflect the new target.
1064 update_mdp_by_offset(mdp, in_bytes(JumpData::displacement_offset()));
1065 bind(profile_continue);
1066 }
1067 }
1068
1069
1070 void InterpreterMacroAssembler::profile_not_taken_branch(Register mdp) {
1071 if (ProfileInterpreter) {
1072 Label profile_continue;
1073
1074 // If no method data exists, go to profile_continue.
1075 test_method_data_pointer(mdp, profile_continue);
1076
1077 // We are taking a branch. Increment the not taken count.
1078 increment_mdp_data_at(mdp, in_bytes(BranchData::not_taken_offset()));
1079
1080 // The method data pointer needs to be updated to correspond to
1081 // the next bytecode
1082 update_mdp_by_constant(mdp, in_bytes(BranchData::branch_data_size()));
1083 bind(profile_continue);
1084 }
1085 }
1086
1087
1088 void InterpreterMacroAssembler::profile_call(Register mdp) {
1089 if (ProfileInterpreter) {
1090 Label profile_continue;
1091
1092 // If no method data exists, go to profile_continue.
1093 test_method_data_pointer(mdp, profile_continue);
1094
1095 // We are making a call. Increment the count.
1096 increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset()));
1097
1098 // The method data pointer needs to be updated to reflect the new target.
1099 update_mdp_by_constant(mdp, in_bytes(CounterData::counter_data_size()));
1100 bind(profile_continue);
1101 }
1102 }
1103
1104 void InterpreterMacroAssembler::profile_final_call(Register mdp) {
1105 if (ProfileInterpreter) {
1106 Label profile_continue;
1107
1108 // If no method data exists, go to profile_continue.
1109 test_method_data_pointer(mdp, profile_continue);
1110
1111 // We are making a call. Increment the count.
1112 increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset()));
1113
1114 // The method data pointer needs to be updated to reflect the new target.
1115 update_mdp_by_constant(mdp,
1116 in_bytes(VirtualCallData::
1117 virtual_call_data_size()));
1118 bind(profile_continue);
1119 }
1120 }
1121
1122
1123 void InterpreterMacroAssembler::profile_virtual_call(Register receiver,
1124 Register mdp,
1125 Register reg2,
1126 bool receiver_can_be_null) {
1127 if (ProfileInterpreter) {
1128 Label profile_continue;
1129
1130 // If no method data exists, go to profile_continue.
1131 test_method_data_pointer(mdp, profile_continue);
1132
1133 Label skip_receiver_profile;
1134 if (receiver_can_be_null) {
1135 Label not_null;
1136 // We are making a call. Increment the count for null receiver.
1137 increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset()));
1138 b(skip_receiver_profile);
1139 bind(not_null);
1140 }
1141
1142 // Record the receiver type.
1143 record_klass_in_profile(receiver, mdp, reg2, true);
1144 bind(skip_receiver_profile);
1145
1146 // The method data pointer needs to be updated to reflect the new target.
1147 #if INCLUDE_JVMCI
1148 if (MethodProfileWidth == 0) {
1149 update_mdp_by_constant(mdp, in_bytes(VirtualCallData::virtual_call_data_size()));
1150 }
1151 #else // INCLUDE_JVMCI
1152 update_mdp_by_constant(mdp,
1153 in_bytes(VirtualCallData::
1154 virtual_call_data_size()));
1155 #endif // INCLUDE_JVMCI
1156 bind(profile_continue);
1157 }
1158 }
1159
1160 #if INCLUDE_JVMCI
1161 void InterpreterMacroAssembler::profile_called_method(Register method, Register mdp, Register reg2) {
1162 assert_different_registers(method, mdp, reg2);
1163 if (ProfileInterpreter && MethodProfileWidth > 0) {
1164 Label profile_continue;
1165
1166 // If no method data exists, go to profile_continue.
1167 test_method_data_pointer(mdp, profile_continue);
1168
1169 Label done;
1170 record_item_in_profile_helper(method, mdp, reg2, 0, done, MethodProfileWidth,
1171 &VirtualCallData::method_offset, &VirtualCallData::method_count_offset, in_bytes(VirtualCallData::nonprofiled_receiver_count_offset()));
1172 bind(done);
1173
1174 update_mdp_by_constant(mdp, in_bytes(VirtualCallData::virtual_call_data_size()));
1175 bind(profile_continue);
1176 }
1177 }
1178 #endif // INCLUDE_JVMCI
1179
1180 // This routine creates a state machine for updating the multi-row
1181 // type profile at a virtual call site (or other type-sensitive bytecode).
1182 // The machine visits each row (of receiver/count) until the receiver type
1183 // is found, or until it runs out of rows. At the same time, it remembers
1184 // the location of the first empty row. (An empty row records null for its
1185 // receiver, and can be allocated for a newly-observed receiver type.)
1186 // Because there are two degrees of freedom in the state, a simple linear
1187 // search will not work; it must be a decision tree. Hence this helper
1188 // function is recursive, to generate the required tree structured code.
1189 // It's the interpreter, so we are trading off code space for speed.
1190 // See below for example code.
1191 void InterpreterMacroAssembler::record_klass_in_profile_helper(
1192 Register receiver, Register mdp,
1193 Register reg2, int start_row,
1194 Label& done, bool is_virtual_call) {
1195 if (TypeProfileWidth == 0) {
1196 if (is_virtual_call) {
1197 increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset()));
1198 }
1199 #if INCLUDE_JVMCI
1200 else if (EnableJVMCI) {
1201 increment_mdp_data_at(mdp, in_bytes(ReceiverTypeData::nonprofiled_receiver_count_offset()));
1202 }
1203 #endif // INCLUDE_JVMCI
1204 } else {
1205 int non_profiled_offset = -1;
1206 if (is_virtual_call) {
1207 non_profiled_offset = in_bytes(CounterData::count_offset());
1208 }
1209 #if INCLUDE_JVMCI
1210 else if (EnableJVMCI) {
1211 non_profiled_offset = in_bytes(ReceiverTypeData::nonprofiled_receiver_count_offset());
1212 }
1213 #endif // INCLUDE_JVMCI
1214
1215 record_item_in_profile_helper(receiver, mdp, reg2, 0, done, TypeProfileWidth,
1216 &VirtualCallData::receiver_offset, &VirtualCallData::receiver_count_offset, non_profiled_offset);
1217 }
1218 }
1219
1220 void InterpreterMacroAssembler::record_item_in_profile_helper(Register item, Register mdp,
1221 Register reg2, int start_row, Label& done, int total_rows,
1222 OffsetFunction item_offset_fn, OffsetFunction item_count_offset_fn,
1223 int non_profiled_offset) {
1224 int last_row = total_rows - 1;
1225 assert(start_row <= last_row, "must be work left to do");
1226 // Test this row for both the item and for null.
1227 // Take any of three different outcomes:
1228 // 1. found item => increment count and goto done
1229 // 2. found null => keep looking for case 1, maybe allocate this cell
1230 // 3. found something else => keep looking for cases 1 and 2
1231 // Case 3 is handled by a recursive call.
1232 for (int row = start_row; row <= last_row; row++) {
1233 Label next_test;
1234 bool test_for_null_also = (row == start_row);
1235
1236 // See if the item is item[n].
1237 int item_offset = in_bytes(item_offset_fn(row));
1238 test_mdp_data_at(mdp, item_offset, item,
1239 (test_for_null_also ? reg2 : noreg),
1240 next_test);
1241 // (Reg2 now contains the item from the CallData.)
1242
1243 // The item is item[n]. Increment count[n].
1244 int count_offset = in_bytes(item_count_offset_fn(row));
1245 increment_mdp_data_at(mdp, count_offset);
1246 b(done);
1247 bind(next_test);
1248
1249 if (test_for_null_also) {
1250 Label found_null;
1251 // Failed the equality check on item[n]... Test for null.
1252 if (start_row == last_row) {
1253 // The only thing left to do is handle the null case.
1254 if (non_profiled_offset >= 0) {
1255 cbz(reg2, found_null);
1256 // Item did not match any saved item and there is no empty row for it.
1257 // Increment total counter to indicate polymorphic case.
1258 increment_mdp_data_at(mdp, non_profiled_offset);
1259 b(done);
1260 bind(found_null);
1261 } else {
1262 cbnz(reg2, done);
1263 }
1264 break;
1265 }
1266 // Since null is rare, make it be the branch-taken case.
1267 cbz(reg2, found_null);
1268
1269 // Put all the "Case 3" tests here.
1270 record_item_in_profile_helper(item, mdp, reg2, start_row + 1, done, total_rows,
1271 item_offset_fn, item_count_offset_fn, non_profiled_offset);
1272
1273 // Found a null. Keep searching for a matching item,
1274 // but remember that this is an empty (unused) slot.
1275 bind(found_null);
1276 }
1277 }
1278
1279 // In the fall-through case, we found no matching item, but we
1280 // observed the item[start_row] is NULL.
1281
1282 // Fill in the item field and increment the count.
1283 int item_offset = in_bytes(item_offset_fn(start_row));
1284 set_mdp_data_at(mdp, item_offset, item);
1285 int count_offset = in_bytes(item_count_offset_fn(start_row));
1286 mov(reg2, DataLayout::counter_increment);
1287 set_mdp_data_at(mdp, count_offset, reg2);
1288 if (start_row > 0) {
1289 b(done);
1290 }
1291 }
1292
1293 // Example state machine code for three profile rows:
1294 // // main copy of decision tree, rooted at row[1]
1295 // if (row[0].rec == rec) { row[0].incr(); goto done; }
1296 // if (row[0].rec != NULL) {
1297 // // inner copy of decision tree, rooted at row[1]
1298 // if (row[1].rec == rec) { row[1].incr(); goto done; }
1299 // if (row[1].rec != NULL) {
1300 // // degenerate decision tree, rooted at row[2]
1301 // if (row[2].rec == rec) { row[2].incr(); goto done; }
1302 // if (row[2].rec != NULL) { count.incr(); goto done; } // overflow
1303 // row[2].init(rec); goto done;
1304 // } else {
1305 // // remember row[1] is empty
1306 // if (row[2].rec == rec) { row[2].incr(); goto done; }
1307 // row[1].init(rec); goto done;
1308 // }
1309 // } else {
1310 // // remember row[0] is empty
1311 // if (row[1].rec == rec) { row[1].incr(); goto done; }
1312 // if (row[2].rec == rec) { row[2].incr(); goto done; }
1313 // row[0].init(rec); goto done;
1314 // }
1315 // done:
1316
1317 void InterpreterMacroAssembler::record_klass_in_profile(Register receiver,
1318 Register mdp, Register reg2,
1319 bool is_virtual_call) {
1320 assert(ProfileInterpreter, "must be profiling");
1321 Label done;
1322
1323 record_klass_in_profile_helper(receiver, mdp, reg2, 0, done, is_virtual_call);
1324
1325 bind (done);
1326 }
1327
1328 void InterpreterMacroAssembler::profile_ret(Register return_bci,
1329 Register mdp) {
1330 if (ProfileInterpreter) {
1331 Label profile_continue;
1332 uint row;
1333
1334 // If no method data exists, go to profile_continue.
1335 test_method_data_pointer(mdp, profile_continue);
1336
1337 // Update the total ret count.
1338 increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset()));
1339
1340 for (row = 0; row < RetData::row_limit(); row++) {
1341 Label next_test;
1342
1343 // See if return_bci is equal to bci[n]:
1344 test_mdp_data_at(mdp,
1345 in_bytes(RetData::bci_offset(row)),
1346 return_bci, noreg,
1347 next_test);
1348
1349 // return_bci is equal to bci[n]. Increment the count.
1350 increment_mdp_data_at(mdp, in_bytes(RetData::bci_count_offset(row)));
1351
1352 // The method data pointer needs to be updated to reflect the new target.
1353 update_mdp_by_offset(mdp,
1354 in_bytes(RetData::bci_displacement_offset(row)));
1355 b(profile_continue);
1356 bind(next_test);
1357 }
1358
1359 update_mdp_for_ret(return_bci);
1360
1361 bind(profile_continue);
1362 }
1363 }
1364
1365 void InterpreterMacroAssembler::profile_null_seen(Register mdp) {
1366 if (ProfileInterpreter) {
1367 Label profile_continue;
1368
1369 // If no method data exists, go to profile_continue.
1370 test_method_data_pointer(mdp, profile_continue);
1371
1372 set_mdp_flag_at(mdp, BitData::null_seen_byte_constant());
1373
1374 // The method data pointer needs to be updated.
1375 int mdp_delta = in_bytes(BitData::bit_data_size());
1376 if (TypeProfileCasts) {
1377 mdp_delta = in_bytes(VirtualCallData::virtual_call_data_size());
1378 }
1379 update_mdp_by_constant(mdp, mdp_delta);
1380
1381 bind(profile_continue);
1382 }
1383 }
1384
1385 void InterpreterMacroAssembler::profile_typecheck_failed(Register mdp) {
1386 if (ProfileInterpreter && TypeProfileCasts) {
1387 Label profile_continue;
1388
1389 // If no method data exists, go to profile_continue.
1390 test_method_data_pointer(mdp, profile_continue);
1391
1392 int count_offset = in_bytes(CounterData::count_offset());
1393 // Back up the address, since we have already bumped the mdp.
1394 count_offset -= in_bytes(VirtualCallData::virtual_call_data_size());
1395
1396 // *Decrement* the counter. We expect to see zero or small negatives.
1397 increment_mdp_data_at(mdp, count_offset, true);
1398
1399 bind (profile_continue);
1400 }
1401 }
1402
1403 void InterpreterMacroAssembler::profile_typecheck(Register mdp, Register klass, Register reg2) {
1404 if (ProfileInterpreter) {
1405 Label profile_continue;
1406
1407 // If no method data exists, go to profile_continue.
1408 test_method_data_pointer(mdp, profile_continue);
1409
1410 // The method data pointer needs to be updated.
1411 int mdp_delta = in_bytes(BitData::bit_data_size());
1412 if (TypeProfileCasts) {
1413 mdp_delta = in_bytes(VirtualCallData::virtual_call_data_size());
1414
1415 // Record the object type.
1416 record_klass_in_profile(klass, mdp, reg2, false);
1417 }
1418 update_mdp_by_constant(mdp, mdp_delta);
1419
1420 bind(profile_continue);
1421 }
1422 }
1423
1424 void InterpreterMacroAssembler::profile_switch_default(Register mdp) {
1425 if (ProfileInterpreter) {
1426 Label profile_continue;
1427
1428 // If no method data exists, go to profile_continue.
1429 test_method_data_pointer(mdp, profile_continue);
1430
1431 // Update the default case count
1432 increment_mdp_data_at(mdp,
1433 in_bytes(MultiBranchData::default_count_offset()));
1434
1435 // The method data pointer needs to be updated.
1436 update_mdp_by_offset(mdp,
1437 in_bytes(MultiBranchData::
1438 default_displacement_offset()));
1439
1440 bind(profile_continue);
1441 }
1442 }
1443
1444 void InterpreterMacroAssembler::profile_switch_case(Register index,
1445 Register mdp,
1446 Register reg2) {
1447 if (ProfileInterpreter) {
1448 Label profile_continue;
1449
1450 // If no method data exists, go to profile_continue.
1451 test_method_data_pointer(mdp, profile_continue);
1452
1453 // Build the base (index * per_case_size_in_bytes()) +
1454 // case_array_offset_in_bytes()
1455 movw(reg2, in_bytes(MultiBranchData::per_case_size()));
1456 movw(rscratch1, in_bytes(MultiBranchData::case_array_offset()));
1457 Assembler::maddw(index, index, reg2, rscratch1);
1458
1459 // Update the case count
1460 increment_mdp_data_at(mdp,
1461 index,
1462 in_bytes(MultiBranchData::relative_count_offset()));
1463
1464 // The method data pointer needs to be updated.
1465 update_mdp_by_offset(mdp,
1466 index,
1467 in_bytes(MultiBranchData::
1468 relative_displacement_offset()));
1469
1470 bind(profile_continue);
1471 }
1472 }
1473
1474 void InterpreterMacroAssembler::verify_oop(Register reg, TosState state) {
1475 if (state == atos) {
1476 MacroAssembler::verify_oop(reg);
1477 }
1478 }
1479
1480 void InterpreterMacroAssembler::verify_FPU(int stack_depth, TosState state) { ; }
1481
1482
1483 void InterpreterMacroAssembler::notify_method_entry() {
1484 // Whenever JVMTI is interp_only_mode, method entry/exit events are sent to
1485 // track stack depth. If it is possible to enter interp_only_mode we add
1486 // the code to check if the event should be sent.
1487 if (JvmtiExport::can_post_interpreter_events()) {
1488 Label L;
1489 ldrw(r3, Address(rthread, JavaThread::interp_only_mode_offset()));
1490 cbzw(r3, L);
1491 call_VM(noreg, CAST_FROM_FN_PTR(address,
1492 InterpreterRuntime::post_method_entry));
1493 bind(L);
1494 }
1495
1496 {
1497 SkipIfEqual skip(this, &DTraceMethodProbes, false);
1498 get_method(c_rarg1);
1499 call_VM_leaf(CAST_FROM_FN_PTR(address, SharedRuntime::dtrace_method_entry),
1500 rthread, c_rarg1);
1501 }
1502
1503 // RedefineClasses() tracing support for obsolete method entry
1504 if (log_is_enabled(Trace, redefine, class, obsolete)) {
1505 get_method(c_rarg1);
1506 call_VM_leaf(
1507 CAST_FROM_FN_PTR(address, SharedRuntime::rc_trace_method_entry),
1508 rthread, c_rarg1);
1509 }
1510
1511 }
1512
1513
1514 void InterpreterMacroAssembler::notify_method_exit(
1515 TosState state, NotifyMethodExitMode mode) {
1516 // Whenever JVMTI is interp_only_mode, method entry/exit events are sent to
1517 // track stack depth. If it is possible to enter interp_only_mode we add
1518 // the code to check if the event should be sent.
1519 if (mode == NotifyJVMTI && JvmtiExport::can_post_interpreter_events()) {
1520 Label L;
1521 // Note: frame::interpreter_frame_result has a dependency on how the
1522 // method result is saved across the call to post_method_exit. If this
1523 // is changed then the interpreter_frame_result implementation will
1524 // need to be updated too.
1525
1526 // template interpreter will leave the result on the top of the stack.
1527 push(state);
1528 ldrw(r3, Address(rthread, JavaThread::interp_only_mode_offset()));
1529 cbz(r3, L);
1530 call_VM(noreg,
1531 CAST_FROM_FN_PTR(address, InterpreterRuntime::post_method_exit));
1532 bind(L);
1533 pop(state);
1534 }
1535
1536 {
1537 SkipIfEqual skip(this, &DTraceMethodProbes, false);
1538 push(state);
1539 get_method(c_rarg1);
1540 call_VM_leaf(CAST_FROM_FN_PTR(address, SharedRuntime::dtrace_method_exit),
1541 rthread, c_rarg1);
1542 pop(state);
1543 }
1544 }
1545
1546
1547 // Jump if ((*counter_addr += increment) & mask) satisfies the condition.
1548 void InterpreterMacroAssembler::increment_mask_and_jump(Address counter_addr,
1549 int increment, Address mask,
1550 Register scratch, Register scratch2,
1551 bool preloaded, Condition cond,
1552 Label* where) {
1553 if (!preloaded) {
1554 ldrw(scratch, counter_addr);
1555 }
1556 add(scratch, scratch, increment);
1557 strw(scratch, counter_addr);
1558 ldrw(scratch2, mask);
1559 ands(scratch, scratch, scratch2);
1560 br(cond, *where);
1561 }
1562
1563 void InterpreterMacroAssembler::call_VM_leaf_base(address entry_point,
1564 int number_of_arguments) {
1565 // interpreter specific
1566 //
1567 // Note: No need to save/restore rbcp & rlocals pointer since these
1568 // are callee saved registers and no blocking/ GC can happen
1569 // in leaf calls.
1570 #ifdef ASSERT
1571 {
1572 Label L;
1573 ldr(rscratch1, Address(rfp, frame::interpreter_frame_last_sp_offset * wordSize));
1574 cbz(rscratch1, L);
1575 stop("InterpreterMacroAssembler::call_VM_leaf_base:"
1576 " last_sp != NULL");
1577 bind(L);
1578 }
1579 #endif /* ASSERT */
1580 // super call
1581 MacroAssembler::call_VM_leaf_base(entry_point, number_of_arguments);
1582 }
1583
1584 void InterpreterMacroAssembler::call_VM_base(Register oop_result,
1585 Register java_thread,
1586 Register last_java_sp,
1587 address entry_point,
1588 int number_of_arguments,
1589 bool check_exceptions) {
1590 // interpreter specific
1591 //
1592 // Note: Could avoid restoring locals ptr (callee saved) - however doesn't
1593 // really make a difference for these runtime calls, since they are
1594 // slow anyway. Btw., bcp must be saved/restored since it may change
1595 // due to GC.
1596 // assert(java_thread == noreg , "not expecting a precomputed java thread");
1597 save_bcp();
1598 #ifdef ASSERT
1599 {
1600 Label L;
1601 ldr(rscratch1, Address(rfp, frame::interpreter_frame_last_sp_offset * wordSize));
1602 cbz(rscratch1, L);
1603 stop("InterpreterMacroAssembler::call_VM_leaf_base:"
1604 " last_sp != NULL");
1605 bind(L);
1606 }
1607 #endif /* ASSERT */
1608 // super call
1609 MacroAssembler::call_VM_base(oop_result, noreg, last_java_sp,
1610 entry_point, number_of_arguments,
1611 check_exceptions);
1612 // interpreter specific
1613 restore_bcp();
1614 restore_locals();
1615 }
1616
1617 void InterpreterMacroAssembler::profile_obj_type(Register obj, const Address& mdo_addr) {
1618 assert_different_registers(obj, rscratch1);
1619 Label update, next, none;
1620
1621 verify_oop(obj);
1622
1623 cbnz(obj, update);
1624 orptr(mdo_addr, TypeEntries::null_seen);
1625 b(next);
1626
1627 bind(update);
1628 load_klass(obj, obj);
1629
1630 ldr(rscratch1, mdo_addr);
1631 eor(obj, obj, rscratch1);
1632 tst(obj, TypeEntries::type_klass_mask);
1633 br(Assembler::EQ, next); // klass seen before, nothing to
1634 // do. The unknown bit may have been
1635 // set already but no need to check.
1636
1637 tbnz(obj, exact_log2(TypeEntries::type_unknown), next);
1638 // already unknown. Nothing to do anymore.
1639
1640 ldr(rscratch1, mdo_addr);
1641 cbz(rscratch1, none);
1642 cmp(rscratch1, TypeEntries::null_seen);
1643 br(Assembler::EQ, none);
1644 // There is a chance that the checks above (re-reading profiling
1645 // data from memory) fail if another thread has just set the
1646 // profiling to this obj's klass
1647 ldr(rscratch1, mdo_addr);
1648 eor(obj, obj, rscratch1);
1649 tst(obj, TypeEntries::type_klass_mask);
1650 br(Assembler::EQ, next);
1651
1652 // different than before. Cannot keep accurate profile.
1653 orptr(mdo_addr, TypeEntries::type_unknown);
1654 b(next);
1655
1656 bind(none);
1657 // first time here. Set profile type.
1658 str(obj, mdo_addr);
1659
1660 bind(next);
1661 }
1662
1663 void InterpreterMacroAssembler::profile_arguments_type(Register mdp, Register callee, Register tmp, bool is_virtual) {
1664 if (!ProfileInterpreter) {
1665 return;
1666 }
1667
1668 if (MethodData::profile_arguments() || MethodData::profile_return()) {
1669 Label profile_continue;
1670
1671 test_method_data_pointer(mdp, profile_continue);
1672
1673 int off_to_start = is_virtual ? in_bytes(VirtualCallData::virtual_call_data_size()) : in_bytes(CounterData::counter_data_size());
1674
1675 ldrb(rscratch1, Address(mdp, in_bytes(DataLayout::tag_offset()) - off_to_start));
1676 cmp(rscratch1, is_virtual ? DataLayout::virtual_call_type_data_tag : DataLayout::call_type_data_tag);
1677 br(Assembler::NE, profile_continue);
1678
1679 if (MethodData::profile_arguments()) {
1680 Label done;
1681 int off_to_args = in_bytes(TypeEntriesAtCall::args_data_offset());
1682
1683 for (int i = 0; i < TypeProfileArgsLimit; i++) {
1684 if (i > 0 || MethodData::profile_return()) {
1685 // If return value type is profiled we may have no argument to profile
1686 ldr(tmp, Address(mdp, in_bytes(TypeEntriesAtCall::cell_count_offset())));
1687 sub(tmp, tmp, i*TypeStackSlotEntries::per_arg_count());
1688 cmp(tmp, TypeStackSlotEntries::per_arg_count());
1689 add(rscratch1, mdp, off_to_args);
1690 br(Assembler::LT, done);
1691 }
1692 ldr(tmp, Address(callee, Method::const_offset()));
1693 load_unsigned_short(tmp, Address(tmp, ConstMethod::size_of_parameters_offset()));
1694 // stack offset o (zero based) from the start of the argument
1695 // list, for n arguments translates into offset n - o - 1 from
1696 // the end of the argument list
1697 ldr(rscratch1, Address(mdp, in_bytes(TypeEntriesAtCall::stack_slot_offset(i))));
1698 sub(tmp, tmp, rscratch1);
1699 sub(tmp, tmp, 1);
1700 Address arg_addr = argument_address(tmp);
1701 ldr(tmp, arg_addr);
1702
1703 Address mdo_arg_addr(mdp, in_bytes(TypeEntriesAtCall::argument_type_offset(i)));
1704 profile_obj_type(tmp, mdo_arg_addr);
1705
1706 int to_add = in_bytes(TypeStackSlotEntries::per_arg_size());
1707 off_to_args += to_add;
1708 }
1709
1710 if (MethodData::profile_return()) {
1711 ldr(tmp, Address(mdp, in_bytes(TypeEntriesAtCall::cell_count_offset())));
1712 sub(tmp, tmp, TypeProfileArgsLimit*TypeStackSlotEntries::per_arg_count());
1713 }
1714
1715 add(rscratch1, mdp, off_to_args);
1716 bind(done);
1717 mov(mdp, rscratch1);
1718
1719 if (MethodData::profile_return()) {
1720 // We're right after the type profile for the last
1721 // argument. tmp is the number of cells left in the
1722 // CallTypeData/VirtualCallTypeData to reach its end. Non null
1723 // if there's a return to profile.
1724 assert(ReturnTypeEntry::static_cell_count() < TypeStackSlotEntries::per_arg_count(), "can't move past ret type");
1725 add(mdp, mdp, tmp, LSL, exact_log2(DataLayout::cell_size));
1726 }
1727 str(mdp, Address(rfp, frame::interpreter_frame_mdp_offset * wordSize));
1728 } else {
1729 assert(MethodData::profile_return(), "either profile call args or call ret");
1730 update_mdp_by_constant(mdp, in_bytes(TypeEntriesAtCall::return_only_size()));
1731 }
1732
1733 // mdp points right after the end of the
1734 // CallTypeData/VirtualCallTypeData, right after the cells for the
1735 // return value type if there's one
1736
1737 bind(profile_continue);
1738 }
1739 }
1740
1741 void InterpreterMacroAssembler::profile_return_type(Register mdp, Register ret, Register tmp) {
1742 assert_different_registers(mdp, ret, tmp, rbcp);
1743 if (ProfileInterpreter && MethodData::profile_return()) {
1744 Label profile_continue, done;
1745
1746 test_method_data_pointer(mdp, profile_continue);
1747
1748 if (MethodData::profile_return_jsr292_only()) {
1749 assert(Method::intrinsic_id_size_in_bytes() == 2, "assuming Method::_intrinsic_id is u2");
1750
1751 // If we don't profile all invoke bytecodes we must make sure
1752 // it's a bytecode we indeed profile. We can't go back to the
1753 // begining of the ProfileData we intend to update to check its
1754 // type because we're right after it and we don't known its
1755 // length
1756 Label do_profile;
1757 ldrb(rscratch1, Address(rbcp, 0));
1758 cmp(rscratch1, Bytecodes::_invokedynamic);
1759 br(Assembler::EQ, do_profile);
1760 cmp(rscratch1, Bytecodes::_invokehandle);
1761 br(Assembler::EQ, do_profile);
1762 get_method(tmp);
1763 ldrh(rscratch1, Address(tmp, Method::intrinsic_id_offset_in_bytes()));
1764 cmp(rscratch1, vmIntrinsics::_compiledLambdaForm);
1765 br(Assembler::NE, profile_continue);
1766
1767 bind(do_profile);
1768 }
1769
1770 Address mdo_ret_addr(mdp, -in_bytes(ReturnTypeEntry::size()));
1771 mov(tmp, ret);
1772 profile_obj_type(tmp, mdo_ret_addr);
1773
1774 bind(profile_continue);
1775 }
1776 }
1777
1778 void InterpreterMacroAssembler::profile_parameters_type(Register mdp, Register tmp1, Register tmp2) {
1779 assert_different_registers(rscratch1, rscratch2, mdp, tmp1, tmp2);
1780 if (ProfileInterpreter && MethodData::profile_parameters()) {
1781 Label profile_continue, done;
1782
1783 test_method_data_pointer(mdp, profile_continue);
1784
1785 // Load the offset of the area within the MDO used for
1786 // parameters. If it's negative we're not profiling any parameters
1787 ldrw(tmp1, Address(mdp, in_bytes(MethodData::parameters_type_data_di_offset()) - in_bytes(MethodData::data_offset())));
1788 tbnz(tmp1, 31, profile_continue); // i.e. sign bit set
1789
1790 // Compute a pointer to the area for parameters from the offset
1791 // and move the pointer to the slot for the last
1792 // parameters. Collect profiling from last parameter down.
1793 // mdo start + parameters offset + array length - 1
1794 add(mdp, mdp, tmp1);
1795 ldr(tmp1, Address(mdp, ArrayData::array_len_offset()));
1796 sub(tmp1, tmp1, TypeStackSlotEntries::per_arg_count());
1797
1798 Label loop;
1799 bind(loop);
1800
1801 int off_base = in_bytes(ParametersTypeData::stack_slot_offset(0));
1802 int type_base = in_bytes(ParametersTypeData::type_offset(0));
1803 int per_arg_scale = exact_log2(DataLayout::cell_size);
1804 add(rscratch1, mdp, off_base);
1805 add(rscratch2, mdp, type_base);
1806
1807 Address arg_off(rscratch1, tmp1, Address::lsl(per_arg_scale));
1808 Address arg_type(rscratch2, tmp1, Address::lsl(per_arg_scale));
1809
1810 // load offset on the stack from the slot for this parameter
1811 ldr(tmp2, arg_off);
1812 neg(tmp2, tmp2);
1813 // read the parameter from the local area
1814 ldr(tmp2, Address(rlocals, tmp2, Address::lsl(Interpreter::logStackElementSize)));
1815
1816 // profile the parameter
1817 profile_obj_type(tmp2, arg_type);
1818
1819 // go to next parameter
1820 subs(tmp1, tmp1, TypeStackSlotEntries::per_arg_count());
1821 br(Assembler::GE, loop);
1822
1823 bind(profile_continue);
1824 }
1825 }