1 /* 2 * Copyright (c) 1997, 2018, Oracle and/or its affiliates. All rights reserved. 3 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. 4 * 5 * This code is free software; you can redistribute it and/or modify it 6 * under the terms of the GNU General Public License version 2 only, as 7 * published by the Free Software Foundation. 8 * 9 * This code is distributed in the hope that it will be useful, but WITHOUT 10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License 12 * version 2 for more details (a copy is included in the LICENSE file that 13 * accompanied this code). 14 * 15 * You should have received a copy of the GNU General Public License version 16 * 2 along with this work; if not, write to the Free Software Foundation, 17 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. 18 * 19 * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA 20 * or visit www.oracle.com if you need additional information or have any 21 * questions. 22 * 23 */ 24 25 #include "precompiled.hpp" 26 #include "interp_masm_x86.hpp" 27 #include "interpreter/interpreter.hpp" 28 #include "interpreter/interpreterRuntime.hpp" 29 #include "logging/log.hpp" 30 #include "oops/arrayOop.hpp" 31 #include "oops/markOop.hpp" 32 #include "oops/methodData.hpp" 33 #include "oops/method.hpp" 34 #include "prims/jvmtiExport.hpp" 35 #include "prims/jvmtiThreadState.hpp" 36 #include "runtime/basicLock.hpp" 37 #include "runtime/biasedLocking.hpp" 38 #include "runtime/frame.inline.hpp" 39 #include "runtime/safepointMechanism.hpp" 40 #include "runtime/sharedRuntime.hpp" 41 #include "runtime/thread.inline.hpp" 42 43 // Implementation of InterpreterMacroAssembler 44 45 void InterpreterMacroAssembler::jump_to_entry(address entry) { 46 assert(entry, "Entry must have been generated by now"); 47 jump(RuntimeAddress(entry)); 48 } 49 50 void InterpreterMacroAssembler::profile_obj_type(Register obj, const Address& mdo_addr) { 51 Label update, next, none; 52 53 verify_oop(obj); 54 55 testptr(obj, obj); 56 jccb(Assembler::notZero, update); 57 orptr(mdo_addr, TypeEntries::null_seen); 58 jmpb(next); 59 60 bind(update); 61 load_klass(obj, obj); 62 63 xorptr(obj, mdo_addr); 64 testptr(obj, TypeEntries::type_klass_mask); 65 jccb(Assembler::zero, next); // klass seen before, nothing to 66 // do. The unknown bit may have been 67 // set already but no need to check. 68 69 testptr(obj, TypeEntries::type_unknown); 70 jccb(Assembler::notZero, next); // already unknown. Nothing to do anymore. 71 72 cmpptr(mdo_addr, 0); 73 jccb(Assembler::equal, none); 74 cmpptr(mdo_addr, TypeEntries::null_seen); 75 jccb(Assembler::equal, none); 76 // There is a chance that the checks above (re-reading profiling 77 // data from memory) fail if another thread has just set the 78 // profiling to this obj's klass 79 xorptr(obj, mdo_addr); 80 testptr(obj, TypeEntries::type_klass_mask); 81 jccb(Assembler::zero, next); 82 83 // different than before. Cannot keep accurate profile. 84 orptr(mdo_addr, TypeEntries::type_unknown); 85 jmpb(next); 86 87 bind(none); 88 // first time here. Set profile type. 89 movptr(mdo_addr, obj); 90 91 bind(next); 92 } 93 94 void InterpreterMacroAssembler::profile_arguments_type(Register mdp, Register callee, Register tmp, bool is_virtual) { 95 if (!ProfileInterpreter) { 96 return; 97 } 98 99 if (MethodData::profile_arguments() || MethodData::profile_return()) { 100 Label profile_continue; 101 102 test_method_data_pointer(mdp, profile_continue); 103 104 int off_to_start = is_virtual ? in_bytes(VirtualCallData::virtual_call_data_size()) : in_bytes(CounterData::counter_data_size()); 105 106 cmpb(Address(mdp, in_bytes(DataLayout::tag_offset()) - off_to_start), is_virtual ? DataLayout::virtual_call_type_data_tag : DataLayout::call_type_data_tag); 107 jcc(Assembler::notEqual, profile_continue); 108 109 if (MethodData::profile_arguments()) { 110 Label done; 111 int off_to_args = in_bytes(TypeEntriesAtCall::args_data_offset()); 112 addptr(mdp, off_to_args); 113 114 for (int i = 0; i < TypeProfileArgsLimit; i++) { 115 if (i > 0 || MethodData::profile_return()) { 116 // If return value type is profiled we may have no argument to profile 117 movptr(tmp, Address(mdp, in_bytes(TypeEntriesAtCall::cell_count_offset())-off_to_args)); 118 subl(tmp, i*TypeStackSlotEntries::per_arg_count()); 119 cmpl(tmp, TypeStackSlotEntries::per_arg_count()); 120 jcc(Assembler::less, done); 121 } 122 movptr(tmp, Address(callee, Method::const_offset())); 123 load_unsigned_short(tmp, Address(tmp, ConstMethod::size_of_parameters_offset())); 124 // stack offset o (zero based) from the start of the argument 125 // list, for n arguments translates into offset n - o - 1 from 126 // the end of the argument list 127 subptr(tmp, Address(mdp, in_bytes(TypeEntriesAtCall::stack_slot_offset(i))-off_to_args)); 128 subl(tmp, 1); 129 Address arg_addr = argument_address(tmp); 130 movptr(tmp, arg_addr); 131 132 Address mdo_arg_addr(mdp, in_bytes(TypeEntriesAtCall::argument_type_offset(i))-off_to_args); 133 profile_obj_type(tmp, mdo_arg_addr); 134 135 int to_add = in_bytes(TypeStackSlotEntries::per_arg_size()); 136 addptr(mdp, to_add); 137 off_to_args += to_add; 138 } 139 140 if (MethodData::profile_return()) { 141 movptr(tmp, Address(mdp, in_bytes(TypeEntriesAtCall::cell_count_offset())-off_to_args)); 142 subl(tmp, TypeProfileArgsLimit*TypeStackSlotEntries::per_arg_count()); 143 } 144 145 bind(done); 146 147 if (MethodData::profile_return()) { 148 // We're right after the type profile for the last 149 // argument. tmp is the number of cells left in the 150 // CallTypeData/VirtualCallTypeData to reach its end. Non null 151 // if there's a return to profile. 152 assert(ReturnTypeEntry::static_cell_count() < TypeStackSlotEntries::per_arg_count(), "can't move past ret type"); 153 shll(tmp, exact_log2(DataLayout::cell_size)); 154 addptr(mdp, tmp); 155 } 156 movptr(Address(rbp, frame::interpreter_frame_mdp_offset * wordSize), mdp); 157 } else { 158 assert(MethodData::profile_return(), "either profile call args or call ret"); 159 update_mdp_by_constant(mdp, in_bytes(TypeEntriesAtCall::return_only_size())); 160 } 161 162 // mdp points right after the end of the 163 // CallTypeData/VirtualCallTypeData, right after the cells for the 164 // return value type if there's one 165 166 bind(profile_continue); 167 } 168 } 169 170 void InterpreterMacroAssembler::profile_return_type(Register mdp, Register ret, Register tmp) { 171 assert_different_registers(mdp, ret, tmp, _bcp_register); 172 if (ProfileInterpreter && MethodData::profile_return()) { 173 Label profile_continue, done; 174 175 test_method_data_pointer(mdp, profile_continue); 176 177 if (MethodData::profile_return_jsr292_only()) { 178 assert(Method::intrinsic_id_size_in_bytes() == 2, "assuming Method::_intrinsic_id is u2"); 179 180 // If we don't profile all invoke bytecodes we must make sure 181 // it's a bytecode we indeed profile. We can't go back to the 182 // begining of the ProfileData we intend to update to check its 183 // type because we're right after it and we don't known its 184 // length 185 Label do_profile; 186 cmpb(Address(_bcp_register, 0), Bytecodes::_invokedynamic); 187 jcc(Assembler::equal, do_profile); 188 cmpb(Address(_bcp_register, 0), Bytecodes::_invokehandle); 189 jcc(Assembler::equal, do_profile); 190 get_method(tmp); 191 cmpw(Address(tmp, Method::intrinsic_id_offset_in_bytes()), vmIntrinsics::_compiledLambdaForm); 192 jcc(Assembler::notEqual, profile_continue); 193 194 bind(do_profile); 195 } 196 197 Address mdo_ret_addr(mdp, -in_bytes(ReturnTypeEntry::size())); 198 mov(tmp, ret); 199 profile_obj_type(tmp, mdo_ret_addr); 200 201 bind(profile_continue); 202 } 203 } 204 205 void InterpreterMacroAssembler::profile_parameters_type(Register mdp, Register tmp1, Register tmp2) { 206 if (ProfileInterpreter && MethodData::profile_parameters()) { 207 Label profile_continue, done; 208 209 test_method_data_pointer(mdp, profile_continue); 210 211 // Load the offset of the area within the MDO used for 212 // parameters. If it's negative we're not profiling any parameters 213 movl(tmp1, Address(mdp, in_bytes(MethodData::parameters_type_data_di_offset()) - in_bytes(MethodData::data_offset()))); 214 testl(tmp1, tmp1); 215 jcc(Assembler::negative, profile_continue); 216 217 // Compute a pointer to the area for parameters from the offset 218 // and move the pointer to the slot for the last 219 // parameters. Collect profiling from last parameter down. 220 // mdo start + parameters offset + array length - 1 221 addptr(mdp, tmp1); 222 movptr(tmp1, Address(mdp, ArrayData::array_len_offset())); 223 decrement(tmp1, TypeStackSlotEntries::per_arg_count()); 224 225 Label loop; 226 bind(loop); 227 228 int off_base = in_bytes(ParametersTypeData::stack_slot_offset(0)); 229 int type_base = in_bytes(ParametersTypeData::type_offset(0)); 230 Address::ScaleFactor per_arg_scale = Address::times(DataLayout::cell_size); 231 Address arg_off(mdp, tmp1, per_arg_scale, off_base); 232 Address arg_type(mdp, tmp1, per_arg_scale, type_base); 233 234 // load offset on the stack from the slot for this parameter 235 movptr(tmp2, arg_off); 236 negptr(tmp2); 237 // read the parameter from the local area 238 movptr(tmp2, Address(_locals_register, tmp2, Interpreter::stackElementScale())); 239 240 // profile the parameter 241 profile_obj_type(tmp2, arg_type); 242 243 // go to next parameter 244 decrement(tmp1, TypeStackSlotEntries::per_arg_count()); 245 jcc(Assembler::positive, loop); 246 247 bind(profile_continue); 248 } 249 } 250 251 void InterpreterMacroAssembler::call_VM_leaf_base(address entry_point, 252 int number_of_arguments) { 253 // interpreter specific 254 // 255 // Note: No need to save/restore bcp & locals registers 256 // since these are callee saved registers and no blocking/ 257 // GC can happen in leaf calls. 258 // Further Note: DO NOT save/restore bcp/locals. If a caller has 259 // already saved them so that it can use rsi/rdi as temporaries 260 // then a save/restore here will DESTROY the copy the caller 261 // saved! There used to be a save_bcp() that only happened in 262 // the ASSERT path (no restore_bcp). Which caused bizarre failures 263 // when jvm built with ASSERTs. 264 #ifdef ASSERT 265 { 266 Label L; 267 cmpptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), (int32_t)NULL_WORD); 268 jcc(Assembler::equal, L); 269 stop("InterpreterMacroAssembler::call_VM_leaf_base:" 270 " last_sp != NULL"); 271 bind(L); 272 } 273 #endif 274 // super call 275 MacroAssembler::call_VM_leaf_base(entry_point, number_of_arguments); 276 // interpreter specific 277 // LP64: Used to ASSERT that r13/r14 were equal to frame's bcp/locals 278 // but since they may not have been saved (and we don't want to 279 // save them here (see note above) the assert is invalid. 280 } 281 282 void InterpreterMacroAssembler::call_VM_base(Register oop_result, 283 Register java_thread, 284 Register last_java_sp, 285 address entry_point, 286 int number_of_arguments, 287 bool check_exceptions) { 288 // interpreter specific 289 // 290 // Note: Could avoid restoring locals ptr (callee saved) - however doesn't 291 // really make a difference for these runtime calls, since they are 292 // slow anyway. Btw., bcp must be saved/restored since it may change 293 // due to GC. 294 NOT_LP64(assert(java_thread == noreg , "not expecting a precomputed java thread");) 295 save_bcp(); 296 #ifdef ASSERT 297 { 298 Label L; 299 cmpptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), (int32_t)NULL_WORD); 300 jcc(Assembler::equal, L); 301 stop("InterpreterMacroAssembler::call_VM_base:" 302 " last_sp != NULL"); 303 bind(L); 304 } 305 #endif /* ASSERT */ 306 // super call 307 MacroAssembler::call_VM_base(oop_result, noreg, last_java_sp, 308 entry_point, number_of_arguments, 309 check_exceptions); 310 // interpreter specific 311 restore_bcp(); 312 restore_locals(); 313 } 314 315 void InterpreterMacroAssembler::check_and_handle_popframe(Register java_thread) { 316 if (JvmtiExport::can_pop_frame()) { 317 Label L; 318 // Initiate popframe handling only if it is not already being 319 // processed. If the flag has the popframe_processing bit set, it 320 // means that this code is called *during* popframe handling - we 321 // don't want to reenter. 322 // This method is only called just after the call into the vm in 323 // call_VM_base, so the arg registers are available. 324 Register pop_cond = NOT_LP64(java_thread) // Not clear if any other register is available on 32 bit 325 LP64_ONLY(c_rarg0); 326 movl(pop_cond, Address(java_thread, JavaThread::popframe_condition_offset())); 327 testl(pop_cond, JavaThread::popframe_pending_bit); 328 jcc(Assembler::zero, L); 329 testl(pop_cond, JavaThread::popframe_processing_bit); 330 jcc(Assembler::notZero, L); 331 // Call Interpreter::remove_activation_preserving_args_entry() to get the 332 // address of the same-named entrypoint in the generated interpreter code. 333 call_VM_leaf(CAST_FROM_FN_PTR(address, Interpreter::remove_activation_preserving_args_entry)); 334 jmp(rax); 335 bind(L); 336 NOT_LP64(get_thread(java_thread);) 337 } 338 } 339 340 void InterpreterMacroAssembler::load_earlyret_value(TosState state) { 341 Register thread = LP64_ONLY(r15_thread) NOT_LP64(rcx); 342 NOT_LP64(get_thread(thread);) 343 movptr(rcx, Address(thread, JavaThread::jvmti_thread_state_offset())); 344 const Address tos_addr(rcx, JvmtiThreadState::earlyret_tos_offset()); 345 const Address oop_addr(rcx, JvmtiThreadState::earlyret_oop_offset()); 346 const Address val_addr(rcx, JvmtiThreadState::earlyret_value_offset()); 347 #ifdef _LP64 348 switch (state) { 349 case atos: movptr(rax, oop_addr); 350 movptr(oop_addr, (int32_t)NULL_WORD); 351 verify_oop(rax, state); break; 352 case ltos: movptr(rax, val_addr); break; 353 case btos: // fall through 354 case ztos: // fall through 355 case ctos: // fall through 356 case stos: // fall through 357 case itos: movl(rax, val_addr); break; 358 case ftos: load_float(val_addr); break; 359 case dtos: load_double(val_addr); break; 360 case vtos: /* nothing to do */ break; 361 default : ShouldNotReachHere(); 362 } 363 // Clean up tos value in the thread object 364 movl(tos_addr, (int) ilgl); 365 movl(val_addr, (int32_t) NULL_WORD); 366 #else 367 const Address val_addr1(rcx, JvmtiThreadState::earlyret_value_offset() 368 + in_ByteSize(wordSize)); 369 switch (state) { 370 case atos: movptr(rax, oop_addr); 371 movptr(oop_addr, NULL_WORD); 372 verify_oop(rax, state); break; 373 case ltos: 374 movl(rdx, val_addr1); // fall through 375 case btos: // fall through 376 case ztos: // fall through 377 case ctos: // fall through 378 case stos: // fall through 379 case itos: movl(rax, val_addr); break; 380 case ftos: load_float(val_addr); break; 381 case dtos: load_double(val_addr); break; 382 case vtos: /* nothing to do */ break; 383 default : ShouldNotReachHere(); 384 } 385 #endif // _LP64 386 // Clean up tos value in the thread object 387 movl(tos_addr, (int32_t) ilgl); 388 movptr(val_addr, NULL_WORD); 389 NOT_LP64(movptr(val_addr1, NULL_WORD);) 390 } 391 392 393 void InterpreterMacroAssembler::check_and_handle_earlyret(Register java_thread) { 394 if (JvmtiExport::can_force_early_return()) { 395 Label L; 396 Register tmp = LP64_ONLY(c_rarg0) NOT_LP64(java_thread); 397 Register rthread = LP64_ONLY(r15_thread) NOT_LP64(java_thread); 398 399 movptr(tmp, Address(rthread, JavaThread::jvmti_thread_state_offset())); 400 testptr(tmp, tmp); 401 jcc(Assembler::zero, L); // if (thread->jvmti_thread_state() == NULL) exit; 402 403 // Initiate earlyret handling only if it is not already being processed. 404 // If the flag has the earlyret_processing bit set, it means that this code 405 // is called *during* earlyret handling - we don't want to reenter. 406 movl(tmp, Address(tmp, JvmtiThreadState::earlyret_state_offset())); 407 cmpl(tmp, JvmtiThreadState::earlyret_pending); 408 jcc(Assembler::notEqual, L); 409 410 // Call Interpreter::remove_activation_early_entry() to get the address of the 411 // same-named entrypoint in the generated interpreter code. 412 NOT_LP64(get_thread(java_thread);) 413 movptr(tmp, Address(rthread, JavaThread::jvmti_thread_state_offset())); 414 #ifdef _LP64 415 movl(tmp, Address(tmp, JvmtiThreadState::earlyret_tos_offset())); 416 call_VM_leaf(CAST_FROM_FN_PTR(address, Interpreter::remove_activation_early_entry), tmp); 417 #else 418 pushl(Address(tmp, JvmtiThreadState::earlyret_tos_offset())); 419 call_VM_leaf(CAST_FROM_FN_PTR(address, Interpreter::remove_activation_early_entry), 1); 420 #endif // _LP64 421 jmp(rax); 422 bind(L); 423 NOT_LP64(get_thread(java_thread);) 424 } 425 } 426 427 void InterpreterMacroAssembler::get_unsigned_2_byte_index_at_bcp(Register reg, int bcp_offset) { 428 assert(bcp_offset >= 0, "bcp is still pointing to start of bytecode"); 429 load_unsigned_short(reg, Address(_bcp_register, bcp_offset)); 430 bswapl(reg); 431 shrl(reg, 16); 432 } 433 434 void InterpreterMacroAssembler::get_cache_index_at_bcp(Register index, 435 int bcp_offset, 436 size_t index_size) { 437 assert(bcp_offset > 0, "bcp is still pointing to start of bytecode"); 438 if (index_size == sizeof(u2)) { 439 load_unsigned_short(index, Address(_bcp_register, bcp_offset)); 440 } else if (index_size == sizeof(u4)) { 441 movl(index, Address(_bcp_register, bcp_offset)); 442 // Check if the secondary index definition is still ~x, otherwise 443 // we have to change the following assembler code to calculate the 444 // plain index. 445 assert(ConstantPool::decode_invokedynamic_index(~123) == 123, "else change next line"); 446 notl(index); // convert to plain index 447 } else if (index_size == sizeof(u1)) { 448 load_unsigned_byte(index, Address(_bcp_register, bcp_offset)); 449 } else { 450 ShouldNotReachHere(); 451 } 452 } 453 454 void InterpreterMacroAssembler::get_cache_and_index_at_bcp(Register cache, 455 Register index, 456 int bcp_offset, 457 size_t index_size) { 458 assert_different_registers(cache, index); 459 get_cache_index_at_bcp(index, bcp_offset, index_size); 460 movptr(cache, Address(rbp, frame::interpreter_frame_cache_offset * wordSize)); 461 assert(sizeof(ConstantPoolCacheEntry) == 4 * wordSize, "adjust code below"); 462 // convert from field index to ConstantPoolCacheEntry index 463 assert(exact_log2(in_words(ConstantPoolCacheEntry::size())) == 2, "else change next line"); 464 shll(index, 2); 465 } 466 467 void InterpreterMacroAssembler::get_cache_and_index_and_bytecode_at_bcp(Register cache, 468 Register index, 469 Register bytecode, 470 int byte_no, 471 int bcp_offset, 472 size_t index_size) { 473 get_cache_and_index_at_bcp(cache, index, bcp_offset, index_size); 474 // We use a 32-bit load here since the layout of 64-bit words on 475 // little-endian machines allow us that. 476 movl(bytecode, Address(cache, index, Address::times_ptr, ConstantPoolCache::base_offset() + ConstantPoolCacheEntry::indices_offset())); 477 const int shift_count = (1 + byte_no) * BitsPerByte; 478 assert((byte_no == TemplateTable::f1_byte && shift_count == ConstantPoolCacheEntry::bytecode_1_shift) || 479 (byte_no == TemplateTable::f2_byte && shift_count == ConstantPoolCacheEntry::bytecode_2_shift), 480 "correct shift count"); 481 shrl(bytecode, shift_count); 482 assert(ConstantPoolCacheEntry::bytecode_1_mask == ConstantPoolCacheEntry::bytecode_2_mask, "common mask"); 483 andl(bytecode, ConstantPoolCacheEntry::bytecode_1_mask); 484 } 485 486 void InterpreterMacroAssembler::get_cache_entry_pointer_at_bcp(Register cache, 487 Register tmp, 488 int bcp_offset, 489 size_t index_size) { 490 assert(cache != tmp, "must use different register"); 491 get_cache_index_at_bcp(tmp, bcp_offset, index_size); 492 assert(sizeof(ConstantPoolCacheEntry) == 4 * wordSize, "adjust code below"); 493 // convert from field index to ConstantPoolCacheEntry index 494 // and from word offset to byte offset 495 assert(exact_log2(in_bytes(ConstantPoolCacheEntry::size_in_bytes())) == 2 + LogBytesPerWord, "else change next line"); 496 shll(tmp, 2 + LogBytesPerWord); 497 movptr(cache, Address(rbp, frame::interpreter_frame_cache_offset * wordSize)); 498 // skip past the header 499 addptr(cache, in_bytes(ConstantPoolCache::base_offset())); 500 addptr(cache, tmp); // construct pointer to cache entry 501 } 502 503 // Load object from cpool->resolved_references(index) 504 void InterpreterMacroAssembler::load_resolved_reference_at_index( 505 Register result, Register index, Register tmp) { 506 assert_different_registers(result, index); 507 // convert from field index to resolved_references() index and from 508 // word index to byte offset. Since this is a java object, it can be compressed 509 shll(index, LogBytesPerHeapOop); 510 511 get_constant_pool(result); 512 // load pointer for resolved_references[] objArray 513 movptr(result, Address(result, ConstantPool::cache_offset_in_bytes())); 514 movptr(result, Address(result, ConstantPoolCache::resolved_references_offset_in_bytes())); 515 resolve_oop_handle(result, tmp); 516 // Add in the index 517 addptr(result, index); 518 load_heap_oop(result, Address(result, arrayOopDesc::base_offset_in_bytes(T_OBJECT)), tmp); 519 } 520 521 // load cpool->resolved_klass_at(index) 522 void InterpreterMacroAssembler::load_resolved_klass_at_index(Register cpool, 523 Register index, Register klass) { 524 movw(index, Address(cpool, index, Address::times_ptr, sizeof(ConstantPool))); 525 Register resolved_klasses = cpool; 526 movptr(resolved_klasses, Address(cpool, ConstantPool::resolved_klasses_offset_in_bytes())); 527 movptr(klass, Address(resolved_klasses, index, Address::times_ptr, Array<Klass*>::base_offset_in_bytes())); 528 } 529 530 // Generate a subtype check: branch to ok_is_subtype if sub_klass is a 531 // subtype of super_klass. 532 // 533 // Args: 534 // rax: superklass 535 // Rsub_klass: subklass 536 // 537 // Kills: 538 // rcx, rdi 539 void InterpreterMacroAssembler::gen_subtype_check(Register Rsub_klass, 540 Label& ok_is_subtype) { 541 assert(Rsub_klass != rax, "rax holds superklass"); 542 LP64_ONLY(assert(Rsub_klass != r14, "r14 holds locals");) 543 LP64_ONLY(assert(Rsub_klass != r13, "r13 holds bcp");) 544 assert(Rsub_klass != rcx, "rcx holds 2ndary super array length"); 545 assert(Rsub_klass != rdi, "rdi holds 2ndary super array scan ptr"); 546 547 // Profile the not-null value's klass. 548 profile_typecheck(rcx, Rsub_klass, rdi); // blows rcx, reloads rdi 549 550 // Do the check. 551 check_klass_subtype(Rsub_klass, rax, rcx, ok_is_subtype); // blows rcx 552 553 // Profile the failure of the check. 554 profile_typecheck_failed(rcx); // blows rcx 555 } 556 557 558 #ifndef _LP64 559 void InterpreterMacroAssembler::f2ieee() { 560 if (IEEEPrecision) { 561 fstp_s(Address(rsp, 0)); 562 fld_s(Address(rsp, 0)); 563 } 564 } 565 566 567 void InterpreterMacroAssembler::d2ieee() { 568 if (IEEEPrecision) { 569 fstp_d(Address(rsp, 0)); 570 fld_d(Address(rsp, 0)); 571 } 572 } 573 #endif // _LP64 574 575 // Java Expression Stack 576 577 void InterpreterMacroAssembler::pop_ptr(Register r) { 578 pop(r); 579 } 580 581 void InterpreterMacroAssembler::push_ptr(Register r) { 582 push(r); 583 } 584 585 void InterpreterMacroAssembler::push_i(Register r) { 586 push(r); 587 } 588 589 void InterpreterMacroAssembler::push_f(XMMRegister r) { 590 subptr(rsp, wordSize); 591 movflt(Address(rsp, 0), r); 592 } 593 594 void InterpreterMacroAssembler::pop_f(XMMRegister r) { 595 movflt(r, Address(rsp, 0)); 596 addptr(rsp, wordSize); 597 } 598 599 void InterpreterMacroAssembler::push_d(XMMRegister r) { 600 subptr(rsp, 2 * wordSize); 601 movdbl(Address(rsp, 0), r); 602 } 603 604 void InterpreterMacroAssembler::pop_d(XMMRegister r) { 605 movdbl(r, Address(rsp, 0)); 606 addptr(rsp, 2 * Interpreter::stackElementSize); 607 } 608 609 #ifdef _LP64 610 void InterpreterMacroAssembler::pop_i(Register r) { 611 // XXX can't use pop currently, upper half non clean 612 movl(r, Address(rsp, 0)); 613 addptr(rsp, wordSize); 614 } 615 616 void InterpreterMacroAssembler::pop_l(Register r) { 617 movq(r, Address(rsp, 0)); 618 addptr(rsp, 2 * Interpreter::stackElementSize); 619 } 620 621 void InterpreterMacroAssembler::push_l(Register r) { 622 subptr(rsp, 2 * wordSize); 623 movptr(Address(rsp, Interpreter::expr_offset_in_bytes(0)), r ); 624 movptr(Address(rsp, Interpreter::expr_offset_in_bytes(1)), NULL_WORD ); 625 } 626 627 void InterpreterMacroAssembler::pop(TosState state) { 628 switch (state) { 629 case atos: pop_ptr(); break; 630 case btos: 631 case ztos: 632 case ctos: 633 case stos: 634 case itos: pop_i(); break; 635 case ltos: pop_l(); break; 636 case ftos: pop_f(xmm0); break; 637 case dtos: pop_d(xmm0); break; 638 case vtos: /* nothing to do */ break; 639 default: ShouldNotReachHere(); 640 } 641 verify_oop(rax, state); 642 } 643 644 void InterpreterMacroAssembler::push(TosState state) { 645 verify_oop(rax, state); 646 switch (state) { 647 case atos: push_ptr(); break; 648 case btos: 649 case ztos: 650 case ctos: 651 case stos: 652 case itos: push_i(); break; 653 case ltos: push_l(); break; 654 case ftos: push_f(xmm0); break; 655 case dtos: push_d(xmm0); break; 656 case vtos: /* nothing to do */ break; 657 default : ShouldNotReachHere(); 658 } 659 } 660 #else 661 void InterpreterMacroAssembler::pop_i(Register r) { 662 pop(r); 663 } 664 665 void InterpreterMacroAssembler::pop_l(Register lo, Register hi) { 666 pop(lo); 667 pop(hi); 668 } 669 670 void InterpreterMacroAssembler::pop_f() { 671 fld_s(Address(rsp, 0)); 672 addptr(rsp, 1 * wordSize); 673 } 674 675 void InterpreterMacroAssembler::pop_d() { 676 fld_d(Address(rsp, 0)); 677 addptr(rsp, 2 * wordSize); 678 } 679 680 681 void InterpreterMacroAssembler::pop(TosState state) { 682 switch (state) { 683 case atos: pop_ptr(rax); break; 684 case btos: // fall through 685 case ztos: // fall through 686 case ctos: // fall through 687 case stos: // fall through 688 case itos: pop_i(rax); break; 689 case ltos: pop_l(rax, rdx); break; 690 case ftos: 691 if (UseSSE >= 1) { 692 pop_f(xmm0); 693 } else { 694 pop_f(); 695 } 696 break; 697 case dtos: 698 if (UseSSE >= 2) { 699 pop_d(xmm0); 700 } else { 701 pop_d(); 702 } 703 break; 704 case vtos: /* nothing to do */ break; 705 default : ShouldNotReachHere(); 706 } 707 verify_oop(rax, state); 708 } 709 710 711 void InterpreterMacroAssembler::push_l(Register lo, Register hi) { 712 push(hi); 713 push(lo); 714 } 715 716 void InterpreterMacroAssembler::push_f() { 717 // Do not schedule for no AGI! Never write beyond rsp! 718 subptr(rsp, 1 * wordSize); 719 fstp_s(Address(rsp, 0)); 720 } 721 722 void InterpreterMacroAssembler::push_d() { 723 // Do not schedule for no AGI! Never write beyond rsp! 724 subptr(rsp, 2 * wordSize); 725 fstp_d(Address(rsp, 0)); 726 } 727 728 729 void InterpreterMacroAssembler::push(TosState state) { 730 verify_oop(rax, state); 731 switch (state) { 732 case atos: push_ptr(rax); break; 733 case btos: // fall through 734 case ztos: // fall through 735 case ctos: // fall through 736 case stos: // fall through 737 case itos: push_i(rax); break; 738 case ltos: push_l(rax, rdx); break; 739 case ftos: 740 if (UseSSE >= 1) { 741 push_f(xmm0); 742 } else { 743 push_f(); 744 } 745 break; 746 case dtos: 747 if (UseSSE >= 2) { 748 push_d(xmm0); 749 } else { 750 push_d(); 751 } 752 break; 753 case vtos: /* nothing to do */ break; 754 default : ShouldNotReachHere(); 755 } 756 } 757 #endif // _LP64 758 759 760 // Helpers for swap and dup 761 void InterpreterMacroAssembler::load_ptr(int n, Register val) { 762 movptr(val, Address(rsp, Interpreter::expr_offset_in_bytes(n))); 763 } 764 765 void InterpreterMacroAssembler::store_ptr(int n, Register val) { 766 movptr(Address(rsp, Interpreter::expr_offset_in_bytes(n)), val); 767 } 768 769 770 void InterpreterMacroAssembler::prepare_to_jump_from_interpreted() { 771 // set sender sp 772 lea(_bcp_register, Address(rsp, wordSize)); 773 // record last_sp 774 movptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), _bcp_register); 775 } 776 777 778 // Jump to from_interpreted entry of a call unless single stepping is possible 779 // in this thread in which case we must call the i2i entry 780 void InterpreterMacroAssembler::jump_from_interpreted(Register method, Register temp) { 781 prepare_to_jump_from_interpreted(); 782 783 if (JvmtiExport::can_post_interpreter_events()) { 784 Label run_compiled_code; 785 // JVMTI events, such as single-stepping, are implemented partly by avoiding running 786 // compiled code in threads for which the event is enabled. Check here for 787 // interp_only_mode if these events CAN be enabled. 788 // interp_only is an int, on little endian it is sufficient to test the byte only 789 // Is a cmpl faster? 790 LP64_ONLY(temp = r15_thread;) 791 NOT_LP64(get_thread(temp);) 792 cmpb(Address(temp, JavaThread::interp_only_mode_offset()), 0); 793 jccb(Assembler::zero, run_compiled_code); 794 jmp(Address(method, Method::interpreter_entry_offset())); 795 bind(run_compiled_code); 796 } 797 798 jmp(Address(method, Method::from_interpreted_offset())); 799 } 800 801 // The following two routines provide a hook so that an implementation 802 // can schedule the dispatch in two parts. x86 does not do this. 803 void InterpreterMacroAssembler::dispatch_prolog(TosState state, int step) { 804 // Nothing x86 specific to be done here 805 } 806 807 void InterpreterMacroAssembler::dispatch_epilog(TosState state, int step) { 808 dispatch_next(state, step); 809 } 810 811 void InterpreterMacroAssembler::dispatch_base(TosState state, 812 address* table, 813 bool verifyoop, 814 bool generate_poll) { 815 verify_FPU(1, state); 816 if (VerifyActivationFrameSize) { 817 Label L; 818 mov(rcx, rbp); 819 subptr(rcx, rsp); 820 int32_t min_frame_size = 821 (frame::link_offset - frame::interpreter_frame_initial_sp_offset) * 822 wordSize; 823 cmpptr(rcx, (int32_t)min_frame_size); 824 jcc(Assembler::greaterEqual, L); 825 stop("broken stack frame"); 826 bind(L); 827 } 828 if (verifyoop) { 829 verify_oop(rax, state); 830 } 831 832 address* const safepoint_table = Interpreter::safept_table(state); 833 #ifdef _LP64 834 Label no_safepoint, dispatch; 835 if (SafepointMechanism::uses_thread_local_poll() && table != safepoint_table && generate_poll) { 836 NOT_PRODUCT(block_comment("Thread-local Safepoint poll")); 837 testb(Address(r15_thread, Thread::polling_page_offset()), SafepointMechanism::poll_bit()); 838 839 jccb(Assembler::zero, no_safepoint); 840 lea(rscratch1, ExternalAddress((address)safepoint_table)); 841 jmpb(dispatch); 842 } 843 844 bind(no_safepoint); 845 lea(rscratch1, ExternalAddress((address)table)); 846 bind(dispatch); 847 jmp(Address(rscratch1, rbx, Address::times_8)); 848 849 #else 850 Address index(noreg, rbx, Address::times_ptr); 851 if (SafepointMechanism::uses_thread_local_poll() && table != safepoint_table && generate_poll) { 852 NOT_PRODUCT(block_comment("Thread-local Safepoint poll")); 853 Label no_safepoint; 854 const Register thread = rcx; 855 get_thread(thread); 856 testb(Address(thread, Thread::polling_page_offset()), SafepointMechanism::poll_bit()); 857 858 jccb(Assembler::zero, no_safepoint); 859 ArrayAddress dispatch_addr(ExternalAddress((address)safepoint_table), index); 860 jump(dispatch_addr); 861 bind(no_safepoint); 862 } 863 864 { 865 ArrayAddress dispatch_addr(ExternalAddress((address)table), index); 866 jump(dispatch_addr); 867 } 868 #endif // _LP64 869 } 870 871 void InterpreterMacroAssembler::dispatch_only(TosState state, bool generate_poll) { 872 dispatch_base(state, Interpreter::dispatch_table(state), true, generate_poll); 873 } 874 875 void InterpreterMacroAssembler::dispatch_only_normal(TosState state) { 876 dispatch_base(state, Interpreter::normal_table(state)); 877 } 878 879 void InterpreterMacroAssembler::dispatch_only_noverify(TosState state) { 880 dispatch_base(state, Interpreter::normal_table(state), false); 881 } 882 883 884 void InterpreterMacroAssembler::dispatch_next(TosState state, int step, bool generate_poll) { 885 // load next bytecode (load before advancing _bcp_register to prevent AGI) 886 load_unsigned_byte(rbx, Address(_bcp_register, step)); 887 // advance _bcp_register 888 increment(_bcp_register, step); 889 dispatch_base(state, Interpreter::dispatch_table(state), true, generate_poll); 890 } 891 892 void InterpreterMacroAssembler::dispatch_via(TosState state, address* table) { 893 // load current bytecode 894 load_unsigned_byte(rbx, Address(_bcp_register, 0)); 895 dispatch_base(state, table); 896 } 897 898 void InterpreterMacroAssembler::narrow(Register result) { 899 900 // Get method->_constMethod->_result_type 901 movptr(rcx, Address(rbp, frame::interpreter_frame_method_offset * wordSize)); 902 movptr(rcx, Address(rcx, Method::const_offset())); 903 load_unsigned_byte(rcx, Address(rcx, ConstMethod::result_type_offset())); 904 905 Label done, notBool, notByte, notChar; 906 907 // common case first 908 cmpl(rcx, T_INT); 909 jcc(Assembler::equal, done); 910 911 // mask integer result to narrower return type. 912 cmpl(rcx, T_BOOLEAN); 913 jcc(Assembler::notEqual, notBool); 914 andl(result, 0x1); 915 jmp(done); 916 917 bind(notBool); 918 cmpl(rcx, T_BYTE); 919 jcc(Assembler::notEqual, notByte); 920 LP64_ONLY(movsbl(result, result);) 921 NOT_LP64(shll(result, 24);) // truncate upper 24 bits 922 NOT_LP64(sarl(result, 24);) // and sign-extend byte 923 jmp(done); 924 925 bind(notByte); 926 cmpl(rcx, T_CHAR); 927 jcc(Assembler::notEqual, notChar); 928 LP64_ONLY(movzwl(result, result);) 929 NOT_LP64(andl(result, 0xFFFF);) // truncate upper 16 bits 930 jmp(done); 931 932 bind(notChar); 933 // cmpl(rcx, T_SHORT); // all that's left 934 // jcc(Assembler::notEqual, done); 935 LP64_ONLY(movswl(result, result);) 936 NOT_LP64(shll(result, 16);) // truncate upper 16 bits 937 NOT_LP64(sarl(result, 16);) // and sign-extend short 938 939 // Nothing to do for T_INT 940 bind(done); 941 } 942 943 // remove activation 944 // 945 // Unlock the receiver if this is a synchronized method. 946 // Unlock any Java monitors from syncronized blocks. 947 // Remove the activation from the stack. 948 // 949 // If there are locked Java monitors 950 // If throw_monitor_exception 951 // throws IllegalMonitorStateException 952 // Else if install_monitor_exception 953 // installs IllegalMonitorStateException 954 // Else 955 // no error processing 956 void InterpreterMacroAssembler::remove_activation( 957 TosState state, 958 Register ret_addr, 959 bool throw_monitor_exception, 960 bool install_monitor_exception, 961 bool notify_jvmdi) { 962 // Note: Registers rdx xmm0 may be in use for the 963 // result check if synchronized method 964 Label unlocked, unlock, no_unlock; 965 966 const Register rthread = LP64_ONLY(r15_thread) NOT_LP64(rcx); 967 const Register robj = LP64_ONLY(c_rarg1) NOT_LP64(rdx); 968 const Register rmon = LP64_ONLY(c_rarg1) NOT_LP64(rcx); 969 // monitor pointers need different register 970 // because rdx may have the result in it 971 NOT_LP64(get_thread(rcx);) 972 973 // get the value of _do_not_unlock_if_synchronized into rdx 974 const Address do_not_unlock_if_synchronized(rthread, 975 in_bytes(JavaThread::do_not_unlock_if_synchronized_offset())); 976 movbool(rbx, do_not_unlock_if_synchronized); 977 movbool(do_not_unlock_if_synchronized, false); // reset the flag 978 979 // get method access flags 980 movptr(rcx, Address(rbp, frame::interpreter_frame_method_offset * wordSize)); 981 movl(rcx, Address(rcx, Method::access_flags_offset())); 982 testl(rcx, JVM_ACC_SYNCHRONIZED); 983 jcc(Assembler::zero, unlocked); 984 985 // Don't unlock anything if the _do_not_unlock_if_synchronized flag 986 // is set. 987 testbool(rbx); 988 jcc(Assembler::notZero, no_unlock); 989 990 // unlock monitor 991 push(state); // save result 992 993 // BasicObjectLock will be first in list, since this is a 994 // synchronized method. However, need to check that the object has 995 // not been unlocked by an explicit monitorexit bytecode. 996 const Address monitor(rbp, frame::interpreter_frame_initial_sp_offset * 997 wordSize - (int) sizeof(BasicObjectLock)); 998 // We use c_rarg1/rdx so that if we go slow path it will be the correct 999 // register for unlock_object to pass to VM directly 1000 lea(robj, monitor); // address of first monitor 1001 1002 movptr(rax, Address(robj, BasicObjectLock::obj_offset_in_bytes())); 1003 testptr(rax, rax); 1004 jcc(Assembler::notZero, unlock); 1005 1006 pop(state); 1007 if (throw_monitor_exception) { 1008 // Entry already unlocked, need to throw exception 1009 NOT_LP64(empty_FPU_stack();) // remove possible return value from FPU-stack, otherwise stack could overflow 1010 call_VM(noreg, CAST_FROM_FN_PTR(address, 1011 InterpreterRuntime::throw_illegal_monitor_state_exception)); 1012 should_not_reach_here(); 1013 } else { 1014 // Monitor already unlocked during a stack unroll. If requested, 1015 // install an illegal_monitor_state_exception. Continue with 1016 // stack unrolling. 1017 if (install_monitor_exception) { 1018 NOT_LP64(empty_FPU_stack();) 1019 call_VM(noreg, CAST_FROM_FN_PTR(address, 1020 InterpreterRuntime::new_illegal_monitor_state_exception)); 1021 } 1022 jmp(unlocked); 1023 } 1024 1025 bind(unlock); 1026 unlock_object(robj); 1027 pop(state); 1028 1029 // Check that for block-structured locking (i.e., that all locked 1030 // objects has been unlocked) 1031 bind(unlocked); 1032 1033 // rax, rdx: Might contain return value 1034 1035 // Check that all monitors are unlocked 1036 { 1037 Label loop, exception, entry, restart; 1038 const int entry_size = frame::interpreter_frame_monitor_size() * wordSize; 1039 const Address monitor_block_top( 1040 rbp, frame::interpreter_frame_monitor_block_top_offset * wordSize); 1041 const Address monitor_block_bot( 1042 rbp, frame::interpreter_frame_initial_sp_offset * wordSize); 1043 1044 bind(restart); 1045 // We use c_rarg1 so that if we go slow path it will be the correct 1046 // register for unlock_object to pass to VM directly 1047 movptr(rmon, monitor_block_top); // points to current entry, starting 1048 // with top-most entry 1049 lea(rbx, monitor_block_bot); // points to word before bottom of 1050 // monitor block 1051 jmp(entry); 1052 1053 // Entry already locked, need to throw exception 1054 bind(exception); 1055 1056 if (throw_monitor_exception) { 1057 // Throw exception 1058 NOT_LP64(empty_FPU_stack();) 1059 MacroAssembler::call_VM(noreg, 1060 CAST_FROM_FN_PTR(address, InterpreterRuntime:: 1061 throw_illegal_monitor_state_exception)); 1062 should_not_reach_here(); 1063 } else { 1064 // Stack unrolling. Unlock object and install illegal_monitor_exception. 1065 // Unlock does not block, so don't have to worry about the frame. 1066 // We don't have to preserve c_rarg1 since we are going to throw an exception. 1067 1068 push(state); 1069 mov(robj, rmon); // nop if robj and rmon are the same 1070 unlock_object(robj); 1071 pop(state); 1072 1073 if (install_monitor_exception) { 1074 NOT_LP64(empty_FPU_stack();) 1075 call_VM(noreg, CAST_FROM_FN_PTR(address, 1076 InterpreterRuntime:: 1077 new_illegal_monitor_state_exception)); 1078 } 1079 1080 jmp(restart); 1081 } 1082 1083 bind(loop); 1084 // check if current entry is used 1085 cmpptr(Address(rmon, BasicObjectLock::obj_offset_in_bytes()), (int32_t) NULL); 1086 jcc(Assembler::notEqual, exception); 1087 1088 addptr(rmon, entry_size); // otherwise advance to next entry 1089 bind(entry); 1090 cmpptr(rmon, rbx); // check if bottom reached 1091 jcc(Assembler::notEqual, loop); // if not at bottom then check this entry 1092 } 1093 1094 bind(no_unlock); 1095 1096 // jvmti support 1097 if (notify_jvmdi) { 1098 notify_method_exit(state, NotifyJVMTI); // preserve TOSCA 1099 } else { 1100 notify_method_exit(state, SkipNotifyJVMTI); // preserve TOSCA 1101 } 1102 1103 // remove activation 1104 // get sender sp 1105 movptr(rbx, 1106 Address(rbp, frame::interpreter_frame_sender_sp_offset * wordSize)); 1107 if (StackReservedPages > 0) { 1108 // testing if reserved zone needs to be re-enabled 1109 Register rthread = LP64_ONLY(r15_thread) NOT_LP64(rcx); 1110 Label no_reserved_zone_enabling; 1111 1112 NOT_LP64(get_thread(rthread);) 1113 1114 cmpl(Address(rthread, JavaThread::stack_guard_state_offset()), JavaThread::stack_guard_enabled); 1115 jcc(Assembler::equal, no_reserved_zone_enabling); 1116 1117 cmpptr(rbx, Address(rthread, JavaThread::reserved_stack_activation_offset())); 1118 jcc(Assembler::lessEqual, no_reserved_zone_enabling); 1119 1120 call_VM_leaf( 1121 CAST_FROM_FN_PTR(address, SharedRuntime::enable_stack_reserved_zone), rthread); 1122 call_VM(noreg, CAST_FROM_FN_PTR(address, 1123 InterpreterRuntime::throw_delayed_StackOverflowError)); 1124 should_not_reach_here(); 1125 1126 bind(no_reserved_zone_enabling); 1127 } 1128 leave(); // remove frame anchor 1129 pop(ret_addr); // get return address 1130 mov(rsp, rbx); // set sp to sender sp 1131 } 1132 1133 void InterpreterMacroAssembler::get_method_counters(Register method, 1134 Register mcs, Label& skip) { 1135 Label has_counters; 1136 movptr(mcs, Address(method, Method::method_counters_offset())); 1137 testptr(mcs, mcs); 1138 jcc(Assembler::notZero, has_counters); 1139 call_VM(noreg, CAST_FROM_FN_PTR(address, 1140 InterpreterRuntime::build_method_counters), method); 1141 movptr(mcs, Address(method,Method::method_counters_offset())); 1142 testptr(mcs, mcs); 1143 jcc(Assembler::zero, skip); // No MethodCounters allocated, OutOfMemory 1144 bind(has_counters); 1145 } 1146 1147 1148 // Lock object 1149 // 1150 // Args: 1151 // rdx, c_rarg1: BasicObjectLock to be used for locking 1152 // 1153 // Kills: 1154 // rax, rbx 1155 void InterpreterMacroAssembler::lock_object(Register lock_reg) { 1156 assert(lock_reg == LP64_ONLY(c_rarg1) NOT_LP64(rdx), 1157 "The argument is only for looks. It must be c_rarg1"); 1158 1159 if (UseHeavyMonitors) { 1160 call_VM(noreg, 1161 CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorenter), 1162 lock_reg); 1163 } else { 1164 Label done; 1165 1166 const Register swap_reg = rax; // Must use rax for cmpxchg instruction 1167 const Register tmp_reg = rbx; // Will be passed to biased_locking_enter to avoid a 1168 // problematic case where tmp_reg = no_reg. 1169 const Register obj_reg = LP64_ONLY(c_rarg3) NOT_LP64(rcx); // Will contain the oop 1170 1171 const int obj_offset = BasicObjectLock::obj_offset_in_bytes(); 1172 const int lock_offset = BasicObjectLock::lock_offset_in_bytes (); 1173 const int mark_offset = lock_offset + 1174 BasicLock::displaced_header_offset_in_bytes(); 1175 1176 Label slow_case; 1177 1178 // Load object pointer into obj_reg 1179 movptr(obj_reg, Address(lock_reg, obj_offset)); 1180 1181 if (UseBiasedLocking) { 1182 biased_locking_enter(lock_reg, obj_reg, swap_reg, tmp_reg, false, done, &slow_case); 1183 } 1184 1185 // Load immediate 1 into swap_reg %rax 1186 movl(swap_reg, (int32_t)1); 1187 1188 // Load (object->mark() | 1) into swap_reg %rax 1189 orptr(swap_reg, Address(obj_reg, oopDesc::mark_offset_in_bytes())); 1190 1191 // Save (object->mark() | 1) into BasicLock's displaced header 1192 movptr(Address(lock_reg, mark_offset), swap_reg); 1193 1194 assert(lock_offset == 0, 1195 "displaced header must be first word in BasicObjectLock"); 1196 1197 if (os::is_MP()) lock(); 1198 cmpxchgptr(lock_reg, Address(obj_reg, oopDesc::mark_offset_in_bytes())); 1199 if (PrintBiasedLockingStatistics) { 1200 cond_inc32(Assembler::zero, 1201 ExternalAddress((address) BiasedLocking::fast_path_entry_count_addr())); 1202 } 1203 jcc(Assembler::zero, done); 1204 1205 const int zero_bits = LP64_ONLY(7) NOT_LP64(3); 1206 1207 // Test if the oopMark is an obvious stack pointer, i.e., 1208 // 1) (mark & zero_bits) == 0, and 1209 // 2) rsp <= mark < mark + os::pagesize() 1210 // 1211 // These 3 tests can be done by evaluating the following 1212 // expression: ((mark - rsp) & (zero_bits - os::vm_page_size())), 1213 // assuming both stack pointer and pagesize have their 1214 // least significant bits clear. 1215 // NOTE: the oopMark is in swap_reg %rax as the result of cmpxchg 1216 subptr(swap_reg, rsp); 1217 andptr(swap_reg, zero_bits - os::vm_page_size()); 1218 1219 // Save the test result, for recursive case, the result is zero 1220 movptr(Address(lock_reg, mark_offset), swap_reg); 1221 1222 if (PrintBiasedLockingStatistics) { 1223 cond_inc32(Assembler::zero, 1224 ExternalAddress((address) BiasedLocking::fast_path_entry_count_addr())); 1225 } 1226 jcc(Assembler::zero, done); 1227 1228 bind(slow_case); 1229 1230 // Call the runtime routine for slow case 1231 call_VM(noreg, 1232 CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorenter), 1233 lock_reg); 1234 1235 bind(done); 1236 } 1237 } 1238 1239 1240 // Unlocks an object. Used in monitorexit bytecode and 1241 // remove_activation. Throws an IllegalMonitorException if object is 1242 // not locked by current thread. 1243 // 1244 // Args: 1245 // rdx, c_rarg1: BasicObjectLock for lock 1246 // 1247 // Kills: 1248 // rax 1249 // c_rarg0, c_rarg1, c_rarg2, c_rarg3, ... (param regs) 1250 // rscratch1 (scratch reg) 1251 // rax, rbx, rcx, rdx 1252 void InterpreterMacroAssembler::unlock_object(Register lock_reg) { 1253 assert(lock_reg == LP64_ONLY(c_rarg1) NOT_LP64(rdx), 1254 "The argument is only for looks. It must be c_rarg1"); 1255 1256 if (UseHeavyMonitors) { 1257 call_VM(noreg, 1258 CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorexit), 1259 lock_reg); 1260 } else { 1261 Label done; 1262 1263 const Register swap_reg = rax; // Must use rax for cmpxchg instruction 1264 const Register header_reg = LP64_ONLY(c_rarg2) NOT_LP64(rbx); // Will contain the old oopMark 1265 const Register obj_reg = LP64_ONLY(c_rarg3) NOT_LP64(rcx); // Will contain the oop 1266 1267 save_bcp(); // Save in case of exception 1268 1269 // Convert from BasicObjectLock structure to object and BasicLock 1270 // structure Store the BasicLock address into %rax 1271 lea(swap_reg, Address(lock_reg, BasicObjectLock::lock_offset_in_bytes())); 1272 1273 // Load oop into obj_reg(%c_rarg3) 1274 movptr(obj_reg, Address(lock_reg, BasicObjectLock::obj_offset_in_bytes())); 1275 1276 // Free entry 1277 movptr(Address(lock_reg, BasicObjectLock::obj_offset_in_bytes()), (int32_t)NULL_WORD); 1278 1279 if (UseBiasedLocking) { 1280 biased_locking_exit(obj_reg, header_reg, done); 1281 } 1282 1283 // Load the old header from BasicLock structure 1284 movptr(header_reg, Address(swap_reg, 1285 BasicLock::displaced_header_offset_in_bytes())); 1286 1287 // Test for recursion 1288 testptr(header_reg, header_reg); 1289 1290 // zero for recursive case 1291 jcc(Assembler::zero, done); 1292 1293 // Atomic swap back the old header 1294 if (os::is_MP()) lock(); 1295 cmpxchgptr(header_reg, Address(obj_reg, oopDesc::mark_offset_in_bytes())); 1296 1297 // zero for simple unlock of a stack-lock case 1298 jcc(Assembler::zero, done); 1299 1300 // Call the runtime routine for slow case. 1301 movptr(Address(lock_reg, BasicObjectLock::obj_offset_in_bytes()), 1302 obj_reg); // restore obj 1303 call_VM(noreg, 1304 CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorexit), 1305 lock_reg); 1306 1307 bind(done); 1308 1309 restore_bcp(); 1310 } 1311 } 1312 1313 void InterpreterMacroAssembler::test_method_data_pointer(Register mdp, 1314 Label& zero_continue) { 1315 assert(ProfileInterpreter, "must be profiling interpreter"); 1316 movptr(mdp, Address(rbp, frame::interpreter_frame_mdp_offset * wordSize)); 1317 testptr(mdp, mdp); 1318 jcc(Assembler::zero, zero_continue); 1319 } 1320 1321 1322 // Set the method data pointer for the current bcp. 1323 void InterpreterMacroAssembler::set_method_data_pointer_for_bcp() { 1324 assert(ProfileInterpreter, "must be profiling interpreter"); 1325 Label set_mdp; 1326 push(rax); 1327 push(rbx); 1328 1329 get_method(rbx); 1330 // Test MDO to avoid the call if it is NULL. 1331 movptr(rax, Address(rbx, in_bytes(Method::method_data_offset()))); 1332 testptr(rax, rax); 1333 jcc(Assembler::zero, set_mdp); 1334 // rbx: method 1335 // _bcp_register: bcp 1336 call_VM_leaf(CAST_FROM_FN_PTR(address, InterpreterRuntime::bcp_to_di), rbx, _bcp_register); 1337 // rax: mdi 1338 // mdo is guaranteed to be non-zero here, we checked for it before the call. 1339 movptr(rbx, Address(rbx, in_bytes(Method::method_data_offset()))); 1340 addptr(rbx, in_bytes(MethodData::data_offset())); 1341 addptr(rax, rbx); 1342 bind(set_mdp); 1343 movptr(Address(rbp, frame::interpreter_frame_mdp_offset * wordSize), rax); 1344 pop(rbx); 1345 pop(rax); 1346 } 1347 1348 void InterpreterMacroAssembler::verify_method_data_pointer() { 1349 assert(ProfileInterpreter, "must be profiling interpreter"); 1350 #ifdef ASSERT 1351 Label verify_continue; 1352 push(rax); 1353 push(rbx); 1354 Register arg3_reg = LP64_ONLY(c_rarg3) NOT_LP64(rcx); 1355 Register arg2_reg = LP64_ONLY(c_rarg2) NOT_LP64(rdx); 1356 push(arg3_reg); 1357 push(arg2_reg); 1358 test_method_data_pointer(arg3_reg, verify_continue); // If mdp is zero, continue 1359 get_method(rbx); 1360 1361 // If the mdp is valid, it will point to a DataLayout header which is 1362 // consistent with the bcp. The converse is highly probable also. 1363 load_unsigned_short(arg2_reg, 1364 Address(arg3_reg, in_bytes(DataLayout::bci_offset()))); 1365 addptr(arg2_reg, Address(rbx, Method::const_offset())); 1366 lea(arg2_reg, Address(arg2_reg, ConstMethod::codes_offset())); 1367 cmpptr(arg2_reg, _bcp_register); 1368 jcc(Assembler::equal, verify_continue); 1369 // rbx: method 1370 // _bcp_register: bcp 1371 // c_rarg3: mdp 1372 call_VM_leaf(CAST_FROM_FN_PTR(address, InterpreterRuntime::verify_mdp), 1373 rbx, _bcp_register, arg3_reg); 1374 bind(verify_continue); 1375 pop(arg2_reg); 1376 pop(arg3_reg); 1377 pop(rbx); 1378 pop(rax); 1379 #endif // ASSERT 1380 } 1381 1382 1383 void InterpreterMacroAssembler::set_mdp_data_at(Register mdp_in, 1384 int constant, 1385 Register value) { 1386 assert(ProfileInterpreter, "must be profiling interpreter"); 1387 Address data(mdp_in, constant); 1388 movptr(data, value); 1389 } 1390 1391 1392 void InterpreterMacroAssembler::increment_mdp_data_at(Register mdp_in, 1393 int constant, 1394 bool decrement) { 1395 // Counter address 1396 Address data(mdp_in, constant); 1397 1398 increment_mdp_data_at(data, decrement); 1399 } 1400 1401 void InterpreterMacroAssembler::increment_mdp_data_at(Address data, 1402 bool decrement) { 1403 assert(ProfileInterpreter, "must be profiling interpreter"); 1404 // %%% this does 64bit counters at best it is wasting space 1405 // at worst it is a rare bug when counters overflow 1406 1407 if (decrement) { 1408 // Decrement the register. Set condition codes. 1409 addptr(data, (int32_t) -DataLayout::counter_increment); 1410 // If the decrement causes the counter to overflow, stay negative 1411 Label L; 1412 jcc(Assembler::negative, L); 1413 addptr(data, (int32_t) DataLayout::counter_increment); 1414 bind(L); 1415 } else { 1416 assert(DataLayout::counter_increment == 1, 1417 "flow-free idiom only works with 1"); 1418 // Increment the register. Set carry flag. 1419 addptr(data, DataLayout::counter_increment); 1420 // If the increment causes the counter to overflow, pull back by 1. 1421 sbbptr(data, (int32_t)0); 1422 } 1423 } 1424 1425 1426 void InterpreterMacroAssembler::increment_mdp_data_at(Register mdp_in, 1427 Register reg, 1428 int constant, 1429 bool decrement) { 1430 Address data(mdp_in, reg, Address::times_1, constant); 1431 1432 increment_mdp_data_at(data, decrement); 1433 } 1434 1435 void InterpreterMacroAssembler::set_mdp_flag_at(Register mdp_in, 1436 int flag_byte_constant) { 1437 assert(ProfileInterpreter, "must be profiling interpreter"); 1438 int header_offset = in_bytes(DataLayout::flags_offset()); 1439 int header_bits = flag_byte_constant; 1440 // Set the flag 1441 orb(Address(mdp_in, header_offset), header_bits); 1442 } 1443 1444 1445 1446 void InterpreterMacroAssembler::test_mdp_data_at(Register mdp_in, 1447 int offset, 1448 Register value, 1449 Register test_value_out, 1450 Label& not_equal_continue) { 1451 assert(ProfileInterpreter, "must be profiling interpreter"); 1452 if (test_value_out == noreg) { 1453 cmpptr(value, Address(mdp_in, offset)); 1454 } else { 1455 // Put the test value into a register, so caller can use it: 1456 movptr(test_value_out, Address(mdp_in, offset)); 1457 cmpptr(test_value_out, value); 1458 } 1459 jcc(Assembler::notEqual, not_equal_continue); 1460 } 1461 1462 1463 void InterpreterMacroAssembler::update_mdp_by_offset(Register mdp_in, 1464 int offset_of_disp) { 1465 assert(ProfileInterpreter, "must be profiling interpreter"); 1466 Address disp_address(mdp_in, offset_of_disp); 1467 addptr(mdp_in, disp_address); 1468 movptr(Address(rbp, frame::interpreter_frame_mdp_offset * wordSize), mdp_in); 1469 } 1470 1471 1472 void InterpreterMacroAssembler::update_mdp_by_offset(Register mdp_in, 1473 Register reg, 1474 int offset_of_disp) { 1475 assert(ProfileInterpreter, "must be profiling interpreter"); 1476 Address disp_address(mdp_in, reg, Address::times_1, offset_of_disp); 1477 addptr(mdp_in, disp_address); 1478 movptr(Address(rbp, frame::interpreter_frame_mdp_offset * wordSize), mdp_in); 1479 } 1480 1481 1482 void InterpreterMacroAssembler::update_mdp_by_constant(Register mdp_in, 1483 int constant) { 1484 assert(ProfileInterpreter, "must be profiling interpreter"); 1485 addptr(mdp_in, constant); 1486 movptr(Address(rbp, frame::interpreter_frame_mdp_offset * wordSize), mdp_in); 1487 } 1488 1489 1490 void InterpreterMacroAssembler::update_mdp_for_ret(Register return_bci) { 1491 assert(ProfileInterpreter, "must be profiling interpreter"); 1492 push(return_bci); // save/restore across call_VM 1493 call_VM(noreg, 1494 CAST_FROM_FN_PTR(address, InterpreterRuntime::update_mdp_for_ret), 1495 return_bci); 1496 pop(return_bci); 1497 } 1498 1499 1500 void InterpreterMacroAssembler::profile_taken_branch(Register mdp, 1501 Register bumped_count) { 1502 if (ProfileInterpreter) { 1503 Label profile_continue; 1504 1505 // If no method data exists, go to profile_continue. 1506 // Otherwise, assign to mdp 1507 test_method_data_pointer(mdp, profile_continue); 1508 1509 // We are taking a branch. Increment the taken count. 1510 // We inline increment_mdp_data_at to return bumped_count in a register 1511 //increment_mdp_data_at(mdp, in_bytes(JumpData::taken_offset())); 1512 Address data(mdp, in_bytes(JumpData::taken_offset())); 1513 movptr(bumped_count, data); 1514 assert(DataLayout::counter_increment == 1, 1515 "flow-free idiom only works with 1"); 1516 addptr(bumped_count, DataLayout::counter_increment); 1517 sbbptr(bumped_count, 0); 1518 movptr(data, bumped_count); // Store back out 1519 1520 // The method data pointer needs to be updated to reflect the new target. 1521 update_mdp_by_offset(mdp, in_bytes(JumpData::displacement_offset())); 1522 bind(profile_continue); 1523 } 1524 } 1525 1526 1527 void InterpreterMacroAssembler::profile_not_taken_branch(Register mdp) { 1528 if (ProfileInterpreter) { 1529 Label profile_continue; 1530 1531 // If no method data exists, go to profile_continue. 1532 test_method_data_pointer(mdp, profile_continue); 1533 1534 // We are taking a branch. Increment the not taken count. 1535 increment_mdp_data_at(mdp, in_bytes(BranchData::not_taken_offset())); 1536 1537 // The method data pointer needs to be updated to correspond to 1538 // the next bytecode 1539 update_mdp_by_constant(mdp, in_bytes(BranchData::branch_data_size())); 1540 bind(profile_continue); 1541 } 1542 } 1543 1544 void InterpreterMacroAssembler::profile_call(Register mdp) { 1545 if (ProfileInterpreter) { 1546 Label profile_continue; 1547 1548 // If no method data exists, go to profile_continue. 1549 test_method_data_pointer(mdp, profile_continue); 1550 1551 // We are making a call. Increment the count. 1552 increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset())); 1553 1554 // The method data pointer needs to be updated to reflect the new target. 1555 update_mdp_by_constant(mdp, in_bytes(CounterData::counter_data_size())); 1556 bind(profile_continue); 1557 } 1558 } 1559 1560 1561 void InterpreterMacroAssembler::profile_final_call(Register mdp) { 1562 if (ProfileInterpreter) { 1563 Label profile_continue; 1564 1565 // If no method data exists, go to profile_continue. 1566 test_method_data_pointer(mdp, profile_continue); 1567 1568 // We are making a call. Increment the count. 1569 increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset())); 1570 1571 // The method data pointer needs to be updated to reflect the new target. 1572 update_mdp_by_constant(mdp, 1573 in_bytes(VirtualCallData:: 1574 virtual_call_data_size())); 1575 bind(profile_continue); 1576 } 1577 } 1578 1579 1580 void InterpreterMacroAssembler::profile_virtual_call(Register receiver, 1581 Register mdp, 1582 Register reg2, 1583 bool receiver_can_be_null) { 1584 if (ProfileInterpreter) { 1585 Label profile_continue; 1586 1587 // If no method data exists, go to profile_continue. 1588 test_method_data_pointer(mdp, profile_continue); 1589 1590 Label skip_receiver_profile; 1591 if (receiver_can_be_null) { 1592 Label not_null; 1593 testptr(receiver, receiver); 1594 jccb(Assembler::notZero, not_null); 1595 // We are making a call. Increment the count for null receiver. 1596 increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset())); 1597 jmp(skip_receiver_profile); 1598 bind(not_null); 1599 } 1600 1601 // Record the receiver type. 1602 record_klass_in_profile(receiver, mdp, reg2, true); 1603 bind(skip_receiver_profile); 1604 1605 // The method data pointer needs to be updated to reflect the new target. 1606 #if INCLUDE_JVMCI 1607 if (MethodProfileWidth == 0) { 1608 update_mdp_by_constant(mdp, in_bytes(VirtualCallData::virtual_call_data_size())); 1609 } 1610 #else // INCLUDE_JVMCI 1611 update_mdp_by_constant(mdp, 1612 in_bytes(VirtualCallData:: 1613 virtual_call_data_size())); 1614 #endif // INCLUDE_JVMCI 1615 bind(profile_continue); 1616 } 1617 } 1618 1619 #if INCLUDE_JVMCI 1620 void InterpreterMacroAssembler::profile_called_method(Register method, Register mdp, Register reg2) { 1621 assert_different_registers(method, mdp, reg2); 1622 if (ProfileInterpreter && MethodProfileWidth > 0) { 1623 Label profile_continue; 1624 1625 // If no method data exists, go to profile_continue. 1626 test_method_data_pointer(mdp, profile_continue); 1627 1628 Label done; 1629 record_item_in_profile_helper(method, mdp, reg2, 0, done, MethodProfileWidth, 1630 &VirtualCallData::method_offset, &VirtualCallData::method_count_offset, in_bytes(VirtualCallData::nonprofiled_receiver_count_offset())); 1631 bind(done); 1632 1633 update_mdp_by_constant(mdp, in_bytes(VirtualCallData::virtual_call_data_size())); 1634 bind(profile_continue); 1635 } 1636 } 1637 #endif // INCLUDE_JVMCI 1638 1639 // This routine creates a state machine for updating the multi-row 1640 // type profile at a virtual call site (or other type-sensitive bytecode). 1641 // The machine visits each row (of receiver/count) until the receiver type 1642 // is found, or until it runs out of rows. At the same time, it remembers 1643 // the location of the first empty row. (An empty row records null for its 1644 // receiver, and can be allocated for a newly-observed receiver type.) 1645 // Because there are two degrees of freedom in the state, a simple linear 1646 // search will not work; it must be a decision tree. Hence this helper 1647 // function is recursive, to generate the required tree structured code. 1648 // It's the interpreter, so we are trading off code space for speed. 1649 // See below for example code. 1650 void InterpreterMacroAssembler::record_klass_in_profile_helper( 1651 Register receiver, Register mdp, 1652 Register reg2, int start_row, 1653 Label& done, bool is_virtual_call) { 1654 if (TypeProfileWidth == 0) { 1655 if (is_virtual_call) { 1656 increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset())); 1657 } 1658 #if INCLUDE_JVMCI 1659 else if (EnableJVMCI) { 1660 increment_mdp_data_at(mdp, in_bytes(ReceiverTypeData::nonprofiled_receiver_count_offset())); 1661 } 1662 #endif // INCLUDE_JVMCI 1663 } else { 1664 int non_profiled_offset = -1; 1665 if (is_virtual_call) { 1666 non_profiled_offset = in_bytes(CounterData::count_offset()); 1667 } 1668 #if INCLUDE_JVMCI 1669 else if (EnableJVMCI) { 1670 non_profiled_offset = in_bytes(ReceiverTypeData::nonprofiled_receiver_count_offset()); 1671 } 1672 #endif // INCLUDE_JVMCI 1673 1674 record_item_in_profile_helper(receiver, mdp, reg2, 0, done, TypeProfileWidth, 1675 &VirtualCallData::receiver_offset, &VirtualCallData::receiver_count_offset, non_profiled_offset); 1676 } 1677 } 1678 1679 void InterpreterMacroAssembler::record_item_in_profile_helper(Register item, Register mdp, 1680 Register reg2, int start_row, Label& done, int total_rows, 1681 OffsetFunction item_offset_fn, OffsetFunction item_count_offset_fn, 1682 int non_profiled_offset) { 1683 int last_row = total_rows - 1; 1684 assert(start_row <= last_row, "must be work left to do"); 1685 // Test this row for both the item and for null. 1686 // Take any of three different outcomes: 1687 // 1. found item => increment count and goto done 1688 // 2. found null => keep looking for case 1, maybe allocate this cell 1689 // 3. found something else => keep looking for cases 1 and 2 1690 // Case 3 is handled by a recursive call. 1691 for (int row = start_row; row <= last_row; row++) { 1692 Label next_test; 1693 bool test_for_null_also = (row == start_row); 1694 1695 // See if the item is item[n]. 1696 int item_offset = in_bytes(item_offset_fn(row)); 1697 test_mdp_data_at(mdp, item_offset, item, 1698 (test_for_null_also ? reg2 : noreg), 1699 next_test); 1700 // (Reg2 now contains the item from the CallData.) 1701 1702 // The item is item[n]. Increment count[n]. 1703 int count_offset = in_bytes(item_count_offset_fn(row)); 1704 increment_mdp_data_at(mdp, count_offset); 1705 jmp(done); 1706 bind(next_test); 1707 1708 if (test_for_null_also) { 1709 Label found_null; 1710 // Failed the equality check on item[n]... Test for null. 1711 testptr(reg2, reg2); 1712 if (start_row == last_row) { 1713 // The only thing left to do is handle the null case. 1714 if (non_profiled_offset >= 0) { 1715 jccb(Assembler::zero, found_null); 1716 // Item did not match any saved item and there is no empty row for it. 1717 // Increment total counter to indicate polymorphic case. 1718 increment_mdp_data_at(mdp, non_profiled_offset); 1719 jmp(done); 1720 bind(found_null); 1721 } else { 1722 jcc(Assembler::notZero, done); 1723 } 1724 break; 1725 } 1726 // Since null is rare, make it be the branch-taken case. 1727 jcc(Assembler::zero, found_null); 1728 1729 // Put all the "Case 3" tests here. 1730 record_item_in_profile_helper(item, mdp, reg2, start_row + 1, done, total_rows, 1731 item_offset_fn, item_count_offset_fn, non_profiled_offset); 1732 1733 // Found a null. Keep searching for a matching item, 1734 // but remember that this is an empty (unused) slot. 1735 bind(found_null); 1736 } 1737 } 1738 1739 // In the fall-through case, we found no matching item, but we 1740 // observed the item[start_row] is NULL. 1741 1742 // Fill in the item field and increment the count. 1743 int item_offset = in_bytes(item_offset_fn(start_row)); 1744 set_mdp_data_at(mdp, item_offset, item); 1745 int count_offset = in_bytes(item_count_offset_fn(start_row)); 1746 movl(reg2, DataLayout::counter_increment); 1747 set_mdp_data_at(mdp, count_offset, reg2); 1748 if (start_row > 0) { 1749 jmp(done); 1750 } 1751 } 1752 1753 // Example state machine code for three profile rows: 1754 // // main copy of decision tree, rooted at row[1] 1755 // if (row[0].rec == rec) { row[0].incr(); goto done; } 1756 // if (row[0].rec != NULL) { 1757 // // inner copy of decision tree, rooted at row[1] 1758 // if (row[1].rec == rec) { row[1].incr(); goto done; } 1759 // if (row[1].rec != NULL) { 1760 // // degenerate decision tree, rooted at row[2] 1761 // if (row[2].rec == rec) { row[2].incr(); goto done; } 1762 // if (row[2].rec != NULL) { count.incr(); goto done; } // overflow 1763 // row[2].init(rec); goto done; 1764 // } else { 1765 // // remember row[1] is empty 1766 // if (row[2].rec == rec) { row[2].incr(); goto done; } 1767 // row[1].init(rec); goto done; 1768 // } 1769 // } else { 1770 // // remember row[0] is empty 1771 // if (row[1].rec == rec) { row[1].incr(); goto done; } 1772 // if (row[2].rec == rec) { row[2].incr(); goto done; } 1773 // row[0].init(rec); goto done; 1774 // } 1775 // done: 1776 1777 void InterpreterMacroAssembler::record_klass_in_profile(Register receiver, 1778 Register mdp, Register reg2, 1779 bool is_virtual_call) { 1780 assert(ProfileInterpreter, "must be profiling"); 1781 Label done; 1782 1783 record_klass_in_profile_helper(receiver, mdp, reg2, 0, done, is_virtual_call); 1784 1785 bind (done); 1786 } 1787 1788 void InterpreterMacroAssembler::profile_ret(Register return_bci, 1789 Register mdp) { 1790 if (ProfileInterpreter) { 1791 Label profile_continue; 1792 uint row; 1793 1794 // If no method data exists, go to profile_continue. 1795 test_method_data_pointer(mdp, profile_continue); 1796 1797 // Update the total ret count. 1798 increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset())); 1799 1800 for (row = 0; row < RetData::row_limit(); row++) { 1801 Label next_test; 1802 1803 // See if return_bci is equal to bci[n]: 1804 test_mdp_data_at(mdp, 1805 in_bytes(RetData::bci_offset(row)), 1806 return_bci, noreg, 1807 next_test); 1808 1809 // return_bci is equal to bci[n]. Increment the count. 1810 increment_mdp_data_at(mdp, in_bytes(RetData::bci_count_offset(row))); 1811 1812 // The method data pointer needs to be updated to reflect the new target. 1813 update_mdp_by_offset(mdp, 1814 in_bytes(RetData::bci_displacement_offset(row))); 1815 jmp(profile_continue); 1816 bind(next_test); 1817 } 1818 1819 update_mdp_for_ret(return_bci); 1820 1821 bind(profile_continue); 1822 } 1823 } 1824 1825 1826 void InterpreterMacroAssembler::profile_null_seen(Register mdp) { 1827 if (ProfileInterpreter) { 1828 Label profile_continue; 1829 1830 // If no method data exists, go to profile_continue. 1831 test_method_data_pointer(mdp, profile_continue); 1832 1833 set_mdp_flag_at(mdp, BitData::null_seen_byte_constant()); 1834 1835 // The method data pointer needs to be updated. 1836 int mdp_delta = in_bytes(BitData::bit_data_size()); 1837 if (TypeProfileCasts) { 1838 mdp_delta = in_bytes(VirtualCallData::virtual_call_data_size()); 1839 } 1840 update_mdp_by_constant(mdp, mdp_delta); 1841 1842 bind(profile_continue); 1843 } 1844 } 1845 1846 1847 void InterpreterMacroAssembler::profile_typecheck_failed(Register mdp) { 1848 if (ProfileInterpreter && TypeProfileCasts) { 1849 Label profile_continue; 1850 1851 // If no method data exists, go to profile_continue. 1852 test_method_data_pointer(mdp, profile_continue); 1853 1854 int count_offset = in_bytes(CounterData::count_offset()); 1855 // Back up the address, since we have already bumped the mdp. 1856 count_offset -= in_bytes(VirtualCallData::virtual_call_data_size()); 1857 1858 // *Decrement* the counter. We expect to see zero or small negatives. 1859 increment_mdp_data_at(mdp, count_offset, true); 1860 1861 bind (profile_continue); 1862 } 1863 } 1864 1865 1866 void InterpreterMacroAssembler::profile_typecheck(Register mdp, Register klass, Register reg2) { 1867 if (ProfileInterpreter) { 1868 Label profile_continue; 1869 1870 // If no method data exists, go to profile_continue. 1871 test_method_data_pointer(mdp, profile_continue); 1872 1873 // The method data pointer needs to be updated. 1874 int mdp_delta = in_bytes(BitData::bit_data_size()); 1875 if (TypeProfileCasts) { 1876 mdp_delta = in_bytes(VirtualCallData::virtual_call_data_size()); 1877 1878 // Record the object type. 1879 record_klass_in_profile(klass, mdp, reg2, false); 1880 NOT_LP64(assert(reg2 == rdi, "we know how to fix this blown reg");) 1881 NOT_LP64(restore_locals();) // Restore EDI 1882 } 1883 update_mdp_by_constant(mdp, mdp_delta); 1884 1885 bind(profile_continue); 1886 } 1887 } 1888 1889 1890 void InterpreterMacroAssembler::profile_switch_default(Register mdp) { 1891 if (ProfileInterpreter) { 1892 Label profile_continue; 1893 1894 // If no method data exists, go to profile_continue. 1895 test_method_data_pointer(mdp, profile_continue); 1896 1897 // Update the default case count 1898 increment_mdp_data_at(mdp, 1899 in_bytes(MultiBranchData::default_count_offset())); 1900 1901 // The method data pointer needs to be updated. 1902 update_mdp_by_offset(mdp, 1903 in_bytes(MultiBranchData:: 1904 default_displacement_offset())); 1905 1906 bind(profile_continue); 1907 } 1908 } 1909 1910 1911 void InterpreterMacroAssembler::profile_switch_case(Register index, 1912 Register mdp, 1913 Register reg2) { 1914 if (ProfileInterpreter) { 1915 Label profile_continue; 1916 1917 // If no method data exists, go to profile_continue. 1918 test_method_data_pointer(mdp, profile_continue); 1919 1920 // Build the base (index * per_case_size_in_bytes()) + 1921 // case_array_offset_in_bytes() 1922 movl(reg2, in_bytes(MultiBranchData::per_case_size())); 1923 imulptr(index, reg2); // XXX l ? 1924 addptr(index, in_bytes(MultiBranchData::case_array_offset())); // XXX l ? 1925 1926 // Update the case count 1927 increment_mdp_data_at(mdp, 1928 index, 1929 in_bytes(MultiBranchData::relative_count_offset())); 1930 1931 // The method data pointer needs to be updated. 1932 update_mdp_by_offset(mdp, 1933 index, 1934 in_bytes(MultiBranchData:: 1935 relative_displacement_offset())); 1936 1937 bind(profile_continue); 1938 } 1939 } 1940 1941 1942 1943 void InterpreterMacroAssembler::verify_oop(Register reg, TosState state) { 1944 if (state == atos) { 1945 MacroAssembler::verify_oop(reg); 1946 } 1947 } 1948 1949 void InterpreterMacroAssembler::verify_FPU(int stack_depth, TosState state) { 1950 #ifndef _LP64 1951 if ((state == ftos && UseSSE < 1) || 1952 (state == dtos && UseSSE < 2)) { 1953 MacroAssembler::verify_FPU(stack_depth); 1954 } 1955 #endif 1956 } 1957 1958 // Jump if ((*counter_addr += increment) & mask) satisfies the condition. 1959 void InterpreterMacroAssembler::increment_mask_and_jump(Address counter_addr, 1960 int increment, Address mask, 1961 Register scratch, bool preloaded, 1962 Condition cond, Label* where) { 1963 if (!preloaded) { 1964 movl(scratch, counter_addr); 1965 } 1966 incrementl(scratch, increment); 1967 movl(counter_addr, scratch); 1968 andl(scratch, mask); 1969 jcc(cond, *where); 1970 } 1971 1972 void InterpreterMacroAssembler::notify_method_entry() { 1973 // Whenever JVMTI is interp_only_mode, method entry/exit events are sent to 1974 // track stack depth. If it is possible to enter interp_only_mode we add 1975 // the code to check if the event should be sent. 1976 Register rthread = LP64_ONLY(r15_thread) NOT_LP64(rcx); 1977 Register rarg = LP64_ONLY(c_rarg1) NOT_LP64(rbx); 1978 if (JvmtiExport::can_post_interpreter_events()) { 1979 Label L; 1980 NOT_LP64(get_thread(rthread);) 1981 movl(rdx, Address(rthread, JavaThread::interp_only_mode_offset())); 1982 testl(rdx, rdx); 1983 jcc(Assembler::zero, L); 1984 call_VM(noreg, CAST_FROM_FN_PTR(address, 1985 InterpreterRuntime::post_method_entry)); 1986 bind(L); 1987 } 1988 1989 { 1990 SkipIfEqual skip(this, &DTraceMethodProbes, false); 1991 NOT_LP64(get_thread(rthread);) 1992 get_method(rarg); 1993 call_VM_leaf(CAST_FROM_FN_PTR(address, SharedRuntime::dtrace_method_entry), 1994 rthread, rarg); 1995 } 1996 1997 // RedefineClasses() tracing support for obsolete method entry 1998 if (log_is_enabled(Trace, redefine, class, obsolete)) { 1999 NOT_LP64(get_thread(rthread);) 2000 get_method(rarg); 2001 call_VM_leaf( 2002 CAST_FROM_FN_PTR(address, SharedRuntime::rc_trace_method_entry), 2003 rthread, rarg); 2004 } 2005 } 2006 2007 2008 void InterpreterMacroAssembler::notify_method_exit( 2009 TosState state, NotifyMethodExitMode mode) { 2010 // Whenever JVMTI is interp_only_mode, method entry/exit events are sent to 2011 // track stack depth. If it is possible to enter interp_only_mode we add 2012 // the code to check if the event should be sent. 2013 Register rthread = LP64_ONLY(r15_thread) NOT_LP64(rcx); 2014 Register rarg = LP64_ONLY(c_rarg1) NOT_LP64(rbx); 2015 if (mode == NotifyJVMTI && JvmtiExport::can_post_interpreter_events()) { 2016 Label L; 2017 // Note: frame::interpreter_frame_result has a dependency on how the 2018 // method result is saved across the call to post_method_exit. If this 2019 // is changed then the interpreter_frame_result implementation will 2020 // need to be updated too. 2021 2022 // template interpreter will leave the result on the top of the stack. 2023 push(state); 2024 NOT_LP64(get_thread(rthread);) 2025 movl(rdx, Address(rthread, JavaThread::interp_only_mode_offset())); 2026 testl(rdx, rdx); 2027 jcc(Assembler::zero, L); 2028 call_VM(noreg, 2029 CAST_FROM_FN_PTR(address, InterpreterRuntime::post_method_exit)); 2030 bind(L); 2031 pop(state); 2032 } 2033 2034 { 2035 SkipIfEqual skip(this, &DTraceMethodProbes, false); 2036 push(state); 2037 NOT_LP64(get_thread(rthread);) 2038 get_method(rarg); 2039 call_VM_leaf(CAST_FROM_FN_PTR(address, SharedRuntime::dtrace_method_exit), 2040 rthread, rarg); 2041 pop(state); 2042 } 2043 }