1 /* 2 * Copyright (c) 1997, 2018, Oracle and/or its affiliates. All rights reserved. 3 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. 4 * 5 * This code is free software; you can redistribute it and/or modify it 6 * under the terms of the GNU General Public License version 2 only, as 7 * published by the Free Software Foundation. 8 * 9 * This code is distributed in the hope that it will be useful, but WITHOUT 10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License 12 * version 2 for more details (a copy is included in the LICENSE file that 13 * accompanied this code). 14 * 15 * You should have received a copy of the GNU General Public License version 16 * 2 along with this work; if not, write to the Free Software Foundation, 17 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. 18 * 19 * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA 20 * or visit www.oracle.com if you need additional information or have any 21 * questions. 22 * 23 */ 24 25 #include "precompiled.hpp" 26 #include "interp_masm_x86.hpp" 27 #include "interpreter/interpreter.hpp" 28 #include "interpreter/interpreterRuntime.hpp" 29 #include "logging/log.hpp" 30 #include "oops/arrayOop.hpp" 31 #include "oops/markOop.hpp" 32 #include "oops/methodData.hpp" 33 #include "oops/method.hpp" 34 #include "prims/jvmtiExport.hpp" 35 #include "prims/jvmtiThreadState.hpp" 36 #include "runtime/basicLock.hpp" 37 #include "runtime/biasedLocking.hpp" 38 #include "runtime/frame.inline.hpp" 39 #include "runtime/safepointMechanism.hpp" 40 #include "runtime/sharedRuntime.hpp" 41 #include "runtime/thread.inline.hpp" 42 43 // Implementation of InterpreterMacroAssembler 44 45 void InterpreterMacroAssembler::jump_to_entry(address entry) { 46 assert(entry, "Entry must have been generated by now"); 47 jump(RuntimeAddress(entry)); 48 } 49 50 void InterpreterMacroAssembler::profile_obj_type(Register obj, const Address& mdo_addr) { 51 Label update, next, none; 52 53 verify_oop(obj); 54 55 testptr(obj, obj); 56 jccb(Assembler::notZero, update); 57 orptr(mdo_addr, TypeEntries::null_seen); 58 jmpb(next); 59 60 bind(update); 61 load_klass(obj, obj); 62 63 xorptr(obj, mdo_addr); 64 testptr(obj, TypeEntries::type_klass_mask); 65 jccb(Assembler::zero, next); // klass seen before, nothing to 66 // do. The unknown bit may have been 67 // set already but no need to check. 68 69 testptr(obj, TypeEntries::type_unknown); 70 jccb(Assembler::notZero, next); // already unknown. Nothing to do anymore. 71 72 cmpptr(mdo_addr, 0); 73 jccb(Assembler::equal, none); 74 cmpptr(mdo_addr, TypeEntries::null_seen); 75 jccb(Assembler::equal, none); 76 // There is a chance that the checks above (re-reading profiling 77 // data from memory) fail if another thread has just set the 78 // profiling to this obj's klass 79 xorptr(obj, mdo_addr); 80 testptr(obj, TypeEntries::type_klass_mask); 81 jccb(Assembler::zero, next); 82 83 // different than before. Cannot keep accurate profile. 84 orptr(mdo_addr, TypeEntries::type_unknown); 85 jmpb(next); 86 87 bind(none); 88 // first time here. Set profile type. 89 movptr(mdo_addr, obj); 90 91 bind(next); 92 } 93 94 void InterpreterMacroAssembler::profile_arguments_type(Register mdp, Register callee, Register tmp, bool is_virtual) { 95 if (!ProfileInterpreter) { 96 return; 97 } 98 99 if (MethodData::profile_arguments() || MethodData::profile_return()) { 100 Label profile_continue; 101 102 test_method_data_pointer(mdp, profile_continue); 103 104 int off_to_start = is_virtual ? in_bytes(VirtualCallData::virtual_call_data_size()) : in_bytes(CounterData::counter_data_size()); 105 106 cmpb(Address(mdp, in_bytes(DataLayout::tag_offset()) - off_to_start), is_virtual ? DataLayout::virtual_call_type_data_tag : DataLayout::call_type_data_tag); 107 jcc(Assembler::notEqual, profile_continue); 108 109 if (MethodData::profile_arguments()) { 110 Label done; 111 int off_to_args = in_bytes(TypeEntriesAtCall::args_data_offset()); 112 addptr(mdp, off_to_args); 113 114 for (int i = 0; i < TypeProfileArgsLimit; i++) { 115 if (i > 0 || MethodData::profile_return()) { 116 // If return value type is profiled we may have no argument to profile 117 movptr(tmp, Address(mdp, in_bytes(TypeEntriesAtCall::cell_count_offset())-off_to_args)); 118 subl(tmp, i*TypeStackSlotEntries::per_arg_count()); 119 cmpl(tmp, TypeStackSlotEntries::per_arg_count()); 120 jcc(Assembler::less, done); 121 } 122 movptr(tmp, Address(callee, Method::const_offset())); 123 load_unsigned_short(tmp, Address(tmp, ConstMethod::size_of_parameters_offset())); 124 // stack offset o (zero based) from the start of the argument 125 // list, for n arguments translates into offset n - o - 1 from 126 // the end of the argument list 127 subptr(tmp, Address(mdp, in_bytes(TypeEntriesAtCall::stack_slot_offset(i))-off_to_args)); 128 subl(tmp, 1); 129 Address arg_addr = argument_address(tmp); 130 movptr(tmp, arg_addr); 131 132 Address mdo_arg_addr(mdp, in_bytes(TypeEntriesAtCall::argument_type_offset(i))-off_to_args); 133 profile_obj_type(tmp, mdo_arg_addr); 134 135 int to_add = in_bytes(TypeStackSlotEntries::per_arg_size()); 136 addptr(mdp, to_add); 137 off_to_args += to_add; 138 } 139 140 if (MethodData::profile_return()) { 141 movptr(tmp, Address(mdp, in_bytes(TypeEntriesAtCall::cell_count_offset())-off_to_args)); 142 subl(tmp, TypeProfileArgsLimit*TypeStackSlotEntries::per_arg_count()); 143 } 144 145 bind(done); 146 147 if (MethodData::profile_return()) { 148 // We're right after the type profile for the last 149 // argument. tmp is the number of cells left in the 150 // CallTypeData/VirtualCallTypeData to reach its end. Non null 151 // if there's a return to profile. 152 assert(ReturnTypeEntry::static_cell_count() < TypeStackSlotEntries::per_arg_count(), "can't move past ret type"); 153 shll(tmp, exact_log2(DataLayout::cell_size)); 154 addptr(mdp, tmp); 155 } 156 movptr(Address(rbp, frame::interpreter_frame_mdp_offset * wordSize), mdp); 157 } else { 158 assert(MethodData::profile_return(), "either profile call args or call ret"); 159 update_mdp_by_constant(mdp, in_bytes(TypeEntriesAtCall::return_only_size())); 160 } 161 162 // mdp points right after the end of the 163 // CallTypeData/VirtualCallTypeData, right after the cells for the 164 // return value type if there's one 165 166 bind(profile_continue); 167 } 168 } 169 170 void InterpreterMacroAssembler::profile_return_type(Register mdp, Register ret, Register tmp) { 171 assert_different_registers(mdp, ret, tmp, _bcp_register); 172 if (ProfileInterpreter && MethodData::profile_return()) { 173 Label profile_continue, done; 174 175 test_method_data_pointer(mdp, profile_continue); 176 177 if (MethodData::profile_return_jsr292_only()) { 178 assert(Method::intrinsic_id_size_in_bytes() == 2, "assuming Method::_intrinsic_id is u2"); 179 180 // If we don't profile all invoke bytecodes we must make sure 181 // it's a bytecode we indeed profile. We can't go back to the 182 // begining of the ProfileData we intend to update to check its 183 // type because we're right after it and we don't known its 184 // length 185 Label do_profile; 186 cmpb(Address(_bcp_register, 0), Bytecodes::_invokedynamic); 187 jcc(Assembler::equal, do_profile); 188 cmpb(Address(_bcp_register, 0), Bytecodes::_invokehandle); 189 jcc(Assembler::equal, do_profile); 190 get_method(tmp); 191 cmpw(Address(tmp, Method::intrinsic_id_offset_in_bytes()), vmIntrinsics::_compiledLambdaForm); 192 jcc(Assembler::notEqual, profile_continue); 193 194 bind(do_profile); 195 } 196 197 Address mdo_ret_addr(mdp, -in_bytes(ReturnTypeEntry::size())); 198 mov(tmp, ret); 199 profile_obj_type(tmp, mdo_ret_addr); 200 201 bind(profile_continue); 202 } 203 } 204 205 void InterpreterMacroAssembler::profile_parameters_type(Register mdp, Register tmp1, Register tmp2) { 206 if (ProfileInterpreter && MethodData::profile_parameters()) { 207 Label profile_continue, done; 208 209 test_method_data_pointer(mdp, profile_continue); 210 211 // Load the offset of the area within the MDO used for 212 // parameters. If it's negative we're not profiling any parameters 213 movl(tmp1, Address(mdp, in_bytes(MethodData::parameters_type_data_di_offset()) - in_bytes(MethodData::data_offset()))); 214 testl(tmp1, tmp1); 215 jcc(Assembler::negative, profile_continue); 216 217 // Compute a pointer to the area for parameters from the offset 218 // and move the pointer to the slot for the last 219 // parameters. Collect profiling from last parameter down. 220 // mdo start + parameters offset + array length - 1 221 addptr(mdp, tmp1); 222 movptr(tmp1, Address(mdp, ArrayData::array_len_offset())); 223 decrement(tmp1, TypeStackSlotEntries::per_arg_count()); 224 225 Label loop; 226 bind(loop); 227 228 int off_base = in_bytes(ParametersTypeData::stack_slot_offset(0)); 229 int type_base = in_bytes(ParametersTypeData::type_offset(0)); 230 Address::ScaleFactor per_arg_scale = Address::times(DataLayout::cell_size); 231 Address arg_off(mdp, tmp1, per_arg_scale, off_base); 232 Address arg_type(mdp, tmp1, per_arg_scale, type_base); 233 234 // load offset on the stack from the slot for this parameter 235 movptr(tmp2, arg_off); 236 negptr(tmp2); 237 // read the parameter from the local area 238 movptr(tmp2, Address(_locals_register, tmp2, Interpreter::stackElementScale())); 239 240 // profile the parameter 241 profile_obj_type(tmp2, arg_type); 242 243 // go to next parameter 244 decrement(tmp1, TypeStackSlotEntries::per_arg_count()); 245 jcc(Assembler::positive, loop); 246 247 bind(profile_continue); 248 } 249 } 250 251 void InterpreterMacroAssembler::call_VM_leaf_base(address entry_point, 252 int number_of_arguments) { 253 // interpreter specific 254 // 255 // Note: No need to save/restore bcp & locals registers 256 // since these are callee saved registers and no blocking/ 257 // GC can happen in leaf calls. 258 // Further Note: DO NOT save/restore bcp/locals. If a caller has 259 // already saved them so that it can use rsi/rdi as temporaries 260 // then a save/restore here will DESTROY the copy the caller 261 // saved! There used to be a save_bcp() that only happened in 262 // the ASSERT path (no restore_bcp). Which caused bizarre failures 263 // when jvm built with ASSERTs. 264 #ifdef ASSERT 265 { 266 Label L; 267 cmpptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), (int32_t)NULL_WORD); 268 jcc(Assembler::equal, L); 269 stop("InterpreterMacroAssembler::call_VM_leaf_base:" 270 " last_sp != NULL"); 271 bind(L); 272 } 273 #endif 274 // super call 275 MacroAssembler::call_VM_leaf_base(entry_point, number_of_arguments); 276 // interpreter specific 277 // LP64: Used to ASSERT that r13/r14 were equal to frame's bcp/locals 278 // but since they may not have been saved (and we don't want to 279 // save them here (see note above) the assert is invalid. 280 } 281 282 void InterpreterMacroAssembler::call_VM_base(Register oop_result, 283 Register java_thread, 284 Register last_java_sp, 285 address entry_point, 286 int number_of_arguments, 287 bool check_exceptions) { 288 // interpreter specific 289 // 290 // Note: Could avoid restoring locals ptr (callee saved) - however doesn't 291 // really make a difference for these runtime calls, since they are 292 // slow anyway. Btw., bcp must be saved/restored since it may change 293 // due to GC. 294 NOT_LP64(assert(java_thread == noreg , "not expecting a precomputed java thread");) 295 save_bcp(); 296 #ifdef ASSERT 297 { 298 Label L; 299 cmpptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), (int32_t)NULL_WORD); 300 jcc(Assembler::equal, L); 301 stop("InterpreterMacroAssembler::call_VM_base:" 302 " last_sp != NULL"); 303 bind(L); 304 } 305 #endif /* ASSERT */ 306 // super call 307 MacroAssembler::call_VM_base(oop_result, noreg, last_java_sp, 308 entry_point, number_of_arguments, 309 check_exceptions); 310 // interpreter specific 311 restore_bcp(); 312 restore_locals(); 313 } 314 315 void InterpreterMacroAssembler::check_and_handle_popframe(Register java_thread) { 316 if (JvmtiExport::can_pop_frame()) { 317 Label L; 318 // Initiate popframe handling only if it is not already being 319 // processed. If the flag has the popframe_processing bit set, it 320 // means that this code is called *during* popframe handling - we 321 // don't want to reenter. 322 // This method is only called just after the call into the vm in 323 // call_VM_base, so the arg registers are available. 324 Register pop_cond = NOT_LP64(java_thread) // Not clear if any other register is available on 32 bit 325 LP64_ONLY(c_rarg0); 326 movl(pop_cond, Address(java_thread, JavaThread::popframe_condition_offset())); 327 testl(pop_cond, JavaThread::popframe_pending_bit); 328 jcc(Assembler::zero, L); 329 testl(pop_cond, JavaThread::popframe_processing_bit); 330 jcc(Assembler::notZero, L); 331 // Call Interpreter::remove_activation_preserving_args_entry() to get the 332 // address of the same-named entrypoint in the generated interpreter code. 333 call_VM_leaf(CAST_FROM_FN_PTR(address, Interpreter::remove_activation_preserving_args_entry)); 334 jmp(rax); 335 bind(L); 336 NOT_LP64(get_thread(java_thread);) 337 } 338 } 339 340 void InterpreterMacroAssembler::load_earlyret_value(TosState state) { 341 Register thread = LP64_ONLY(r15_thread) NOT_LP64(rcx); 342 NOT_LP64(get_thread(thread);) 343 movptr(rcx, Address(thread, JavaThread::jvmti_thread_state_offset())); 344 const Address tos_addr(rcx, JvmtiThreadState::earlyret_tos_offset()); 345 const Address oop_addr(rcx, JvmtiThreadState::earlyret_oop_offset()); 346 const Address val_addr(rcx, JvmtiThreadState::earlyret_value_offset()); 347 #ifdef _LP64 348 switch (state) { 349 case atos: movptr(rax, oop_addr); 350 movptr(oop_addr, (int32_t)NULL_WORD); 351 verify_oop(rax, state); break; 352 case ltos: movptr(rax, val_addr); break; 353 case btos: // fall through 354 case ztos: // fall through 355 case ctos: // fall through 356 case stos: // fall through 357 case itos: movl(rax, val_addr); break; 358 case ftos: load_float(val_addr); break; 359 case dtos: load_double(val_addr); break; 360 case vtos: /* nothing to do */ break; 361 default : ShouldNotReachHere(); 362 } 363 // Clean up tos value in the thread object 364 movl(tos_addr, (int) ilgl); 365 movl(val_addr, (int32_t) NULL_WORD); 366 #else 367 const Address val_addr1(rcx, JvmtiThreadState::earlyret_value_offset() 368 + in_ByteSize(wordSize)); 369 switch (state) { 370 case atos: movptr(rax, oop_addr); 371 movptr(oop_addr, NULL_WORD); 372 verify_oop(rax, state); break; 373 case ltos: 374 movl(rdx, val_addr1); // fall through 375 case btos: // fall through 376 case ztos: // fall through 377 case ctos: // fall through 378 case stos: // fall through 379 case itos: movl(rax, val_addr); break; 380 case ftos: load_float(val_addr); break; 381 case dtos: load_double(val_addr); break; 382 case vtos: /* nothing to do */ break; 383 default : ShouldNotReachHere(); 384 } 385 #endif // _LP64 386 // Clean up tos value in the thread object 387 movl(tos_addr, (int32_t) ilgl); 388 movptr(val_addr, NULL_WORD); 389 NOT_LP64(movptr(val_addr1, NULL_WORD);) 390 } 391 392 393 void InterpreterMacroAssembler::check_and_handle_earlyret(Register java_thread) { 394 if (JvmtiExport::can_force_early_return()) { 395 Label L; 396 Register tmp = LP64_ONLY(c_rarg0) NOT_LP64(java_thread); 397 Register rthread = LP64_ONLY(r15_thread) NOT_LP64(java_thread); 398 399 movptr(tmp, Address(rthread, JavaThread::jvmti_thread_state_offset())); 400 testptr(tmp, tmp); 401 jcc(Assembler::zero, L); // if (thread->jvmti_thread_state() == NULL) exit; 402 403 // Initiate earlyret handling only if it is not already being processed. 404 // If the flag has the earlyret_processing bit set, it means that this code 405 // is called *during* earlyret handling - we don't want to reenter. 406 movl(tmp, Address(tmp, JvmtiThreadState::earlyret_state_offset())); 407 cmpl(tmp, JvmtiThreadState::earlyret_pending); 408 jcc(Assembler::notEqual, L); 409 410 // Call Interpreter::remove_activation_early_entry() to get the address of the 411 // same-named entrypoint in the generated interpreter code. 412 NOT_LP64(get_thread(java_thread);) 413 movptr(tmp, Address(rthread, JavaThread::jvmti_thread_state_offset())); 414 #ifdef _LP64 415 movl(tmp, Address(tmp, JvmtiThreadState::earlyret_tos_offset())); 416 call_VM_leaf(CAST_FROM_FN_PTR(address, Interpreter::remove_activation_early_entry), tmp); 417 #else 418 pushl(Address(tmp, JvmtiThreadState::earlyret_tos_offset())); 419 call_VM_leaf(CAST_FROM_FN_PTR(address, Interpreter::remove_activation_early_entry), 1); 420 #endif // _LP64 421 jmp(rax); 422 bind(L); 423 NOT_LP64(get_thread(java_thread);) 424 } 425 } 426 427 void InterpreterMacroAssembler::get_unsigned_2_byte_index_at_bcp(Register reg, int bcp_offset) { 428 assert(bcp_offset >= 0, "bcp is still pointing to start of bytecode"); 429 load_unsigned_short(reg, Address(_bcp_register, bcp_offset)); 430 bswapl(reg); 431 shrl(reg, 16); 432 } 433 434 void InterpreterMacroAssembler::get_cache_index_at_bcp(Register index, 435 int bcp_offset, 436 size_t index_size) { 437 assert(bcp_offset > 0, "bcp is still pointing to start of bytecode"); 438 if (index_size == sizeof(u2)) { 439 load_unsigned_short(index, Address(_bcp_register, bcp_offset)); 440 } else if (index_size == sizeof(u4)) { 441 movl(index, Address(_bcp_register, bcp_offset)); 442 // Check if the secondary index definition is still ~x, otherwise 443 // we have to change the following assembler code to calculate the 444 // plain index. 445 assert(ConstantPool::decode_invokedynamic_index(~123) == 123, "else change next line"); 446 notl(index); // convert to plain index 447 } else if (index_size == sizeof(u1)) { 448 load_unsigned_byte(index, Address(_bcp_register, bcp_offset)); 449 } else { 450 ShouldNotReachHere(); 451 } 452 } 453 454 void InterpreterMacroAssembler::get_cache_and_index_at_bcp(Register cache, 455 Register index, 456 int bcp_offset, 457 size_t index_size) { 458 assert_different_registers(cache, index); 459 get_cache_index_at_bcp(index, bcp_offset, index_size); 460 movptr(cache, Address(rbp, frame::interpreter_frame_cache_offset * wordSize)); 461 assert(sizeof(ConstantPoolCacheEntry) == 4 * wordSize, "adjust code below"); 462 // convert from field index to ConstantPoolCacheEntry index 463 assert(exact_log2(in_words(ConstantPoolCacheEntry::size())) == 2, "else change next line"); 464 shll(index, 2); 465 } 466 467 void InterpreterMacroAssembler::get_cache_and_index_and_bytecode_at_bcp(Register cache, 468 Register index, 469 Register bytecode, 470 int byte_no, 471 int bcp_offset, 472 size_t index_size) { 473 get_cache_and_index_at_bcp(cache, index, bcp_offset, index_size); 474 // We use a 32-bit load here since the layout of 64-bit words on 475 // little-endian machines allow us that. 476 movl(bytecode, Address(cache, index, Address::times_ptr, ConstantPoolCache::base_offset() + ConstantPoolCacheEntry::indices_offset())); 477 const int shift_count = (1 + byte_no) * BitsPerByte; 478 assert((byte_no == TemplateTable::f1_byte && shift_count == ConstantPoolCacheEntry::bytecode_1_shift) || 479 (byte_no == TemplateTable::f2_byte && shift_count == ConstantPoolCacheEntry::bytecode_2_shift), 480 "correct shift count"); 481 shrl(bytecode, shift_count); 482 assert(ConstantPoolCacheEntry::bytecode_1_mask == ConstantPoolCacheEntry::bytecode_2_mask, "common mask"); 483 andl(bytecode, ConstantPoolCacheEntry::bytecode_1_mask); 484 } 485 486 void InterpreterMacroAssembler::get_cache_entry_pointer_at_bcp(Register cache, 487 Register tmp, 488 int bcp_offset, 489 size_t index_size) { 490 assert(cache != tmp, "must use different register"); 491 get_cache_index_at_bcp(tmp, bcp_offset, index_size); 492 assert(sizeof(ConstantPoolCacheEntry) == 4 * wordSize, "adjust code below"); 493 // convert from field index to ConstantPoolCacheEntry index 494 // and from word offset to byte offset 495 assert(exact_log2(in_bytes(ConstantPoolCacheEntry::size_in_bytes())) == 2 + LogBytesPerWord, "else change next line"); 496 shll(tmp, 2 + LogBytesPerWord); 497 movptr(cache, Address(rbp, frame::interpreter_frame_cache_offset * wordSize)); 498 // skip past the header 499 addptr(cache, in_bytes(ConstantPoolCache::base_offset())); 500 addptr(cache, tmp); // construct pointer to cache entry 501 } 502 503 // Load object from cpool->resolved_references(index) 504 void InterpreterMacroAssembler::load_resolved_reference_at_index( 505 Register result, Register index, Register tmp) { 506 assert_different_registers(result, index); 507 508 get_constant_pool(result); 509 // load pointer for resolved_references[] objArray 510 movptr(result, Address(result, ConstantPool::cache_offset_in_bytes())); 511 movptr(result, Address(result, ConstantPoolCache::resolved_references_offset_in_bytes())); 512 resolve_oop_handle(result, tmp); 513 load_heap_oop(result, Address(result, index, 514 UseCompressedOops ? Address::times_4 : Address::times_ptr, 515 arrayOopDesc::base_offset_in_bytes(T_OBJECT)), tmp); 516 } 517 518 // load cpool->resolved_klass_at(index) 519 void InterpreterMacroAssembler::load_resolved_klass_at_index(Register cpool, 520 Register index, Register klass) { 521 movw(index, Address(cpool, index, Address::times_ptr, sizeof(ConstantPool))); 522 Register resolved_klasses = cpool; 523 movptr(resolved_klasses, Address(cpool, ConstantPool::resolved_klasses_offset_in_bytes())); 524 movptr(klass, Address(resolved_klasses, index, Address::times_ptr, Array<Klass*>::base_offset_in_bytes())); 525 } 526 527 // Generate a subtype check: branch to ok_is_subtype if sub_klass is a 528 // subtype of super_klass. 529 // 530 // Args: 531 // rax: superklass 532 // Rsub_klass: subklass 533 // 534 // Kills: 535 // rcx, rdi 536 void InterpreterMacroAssembler::gen_subtype_check(Register Rsub_klass, 537 Label& ok_is_subtype) { 538 assert(Rsub_klass != rax, "rax holds superklass"); 539 LP64_ONLY(assert(Rsub_klass != r14, "r14 holds locals");) 540 LP64_ONLY(assert(Rsub_klass != r13, "r13 holds bcp");) 541 assert(Rsub_klass != rcx, "rcx holds 2ndary super array length"); 542 assert(Rsub_klass != rdi, "rdi holds 2ndary super array scan ptr"); 543 544 // Profile the not-null value's klass. 545 profile_typecheck(rcx, Rsub_klass, rdi); // blows rcx, reloads rdi 546 547 // Do the check. 548 check_klass_subtype(Rsub_klass, rax, rcx, ok_is_subtype); // blows rcx 549 550 // Profile the failure of the check. 551 profile_typecheck_failed(rcx); // blows rcx 552 } 553 554 555 #ifndef _LP64 556 void InterpreterMacroAssembler::f2ieee() { 557 if (IEEEPrecision) { 558 fstp_s(Address(rsp, 0)); 559 fld_s(Address(rsp, 0)); 560 } 561 } 562 563 564 void InterpreterMacroAssembler::d2ieee() { 565 if (IEEEPrecision) { 566 fstp_d(Address(rsp, 0)); 567 fld_d(Address(rsp, 0)); 568 } 569 } 570 #endif // _LP64 571 572 // Java Expression Stack 573 574 void InterpreterMacroAssembler::pop_ptr(Register r) { 575 pop(r); 576 } 577 578 void InterpreterMacroAssembler::push_ptr(Register r) { 579 push(r); 580 } 581 582 void InterpreterMacroAssembler::push_i(Register r) { 583 push(r); 584 } 585 586 void InterpreterMacroAssembler::push_f(XMMRegister r) { 587 subptr(rsp, wordSize); 588 movflt(Address(rsp, 0), r); 589 } 590 591 void InterpreterMacroAssembler::pop_f(XMMRegister r) { 592 movflt(r, Address(rsp, 0)); 593 addptr(rsp, wordSize); 594 } 595 596 void InterpreterMacroAssembler::push_d(XMMRegister r) { 597 subptr(rsp, 2 * wordSize); 598 movdbl(Address(rsp, 0), r); 599 } 600 601 void InterpreterMacroAssembler::pop_d(XMMRegister r) { 602 movdbl(r, Address(rsp, 0)); 603 addptr(rsp, 2 * Interpreter::stackElementSize); 604 } 605 606 #ifdef _LP64 607 void InterpreterMacroAssembler::pop_i(Register r) { 608 // XXX can't use pop currently, upper half non clean 609 movl(r, Address(rsp, 0)); 610 addptr(rsp, wordSize); 611 } 612 613 void InterpreterMacroAssembler::pop_l(Register r) { 614 movq(r, Address(rsp, 0)); 615 addptr(rsp, 2 * Interpreter::stackElementSize); 616 } 617 618 void InterpreterMacroAssembler::push_l(Register r) { 619 subptr(rsp, 2 * wordSize); 620 movptr(Address(rsp, Interpreter::expr_offset_in_bytes(0)), r ); 621 movptr(Address(rsp, Interpreter::expr_offset_in_bytes(1)), NULL_WORD ); 622 } 623 624 void InterpreterMacroAssembler::pop(TosState state) { 625 switch (state) { 626 case atos: pop_ptr(); break; 627 case btos: 628 case ztos: 629 case ctos: 630 case stos: 631 case itos: pop_i(); break; 632 case ltos: pop_l(); break; 633 case ftos: pop_f(xmm0); break; 634 case dtos: pop_d(xmm0); break; 635 case vtos: /* nothing to do */ break; 636 default: ShouldNotReachHere(); 637 } 638 verify_oop(rax, state); 639 } 640 641 void InterpreterMacroAssembler::push(TosState state) { 642 verify_oop(rax, state); 643 switch (state) { 644 case atos: push_ptr(); break; 645 case btos: 646 case ztos: 647 case ctos: 648 case stos: 649 case itos: push_i(); break; 650 case ltos: push_l(); break; 651 case ftos: push_f(xmm0); break; 652 case dtos: push_d(xmm0); break; 653 case vtos: /* nothing to do */ break; 654 default : ShouldNotReachHere(); 655 } 656 } 657 #else 658 void InterpreterMacroAssembler::pop_i(Register r) { 659 pop(r); 660 } 661 662 void InterpreterMacroAssembler::pop_l(Register lo, Register hi) { 663 pop(lo); 664 pop(hi); 665 } 666 667 void InterpreterMacroAssembler::pop_f() { 668 fld_s(Address(rsp, 0)); 669 addptr(rsp, 1 * wordSize); 670 } 671 672 void InterpreterMacroAssembler::pop_d() { 673 fld_d(Address(rsp, 0)); 674 addptr(rsp, 2 * wordSize); 675 } 676 677 678 void InterpreterMacroAssembler::pop(TosState state) { 679 switch (state) { 680 case atos: pop_ptr(rax); break; 681 case btos: // fall through 682 case ztos: // fall through 683 case ctos: // fall through 684 case stos: // fall through 685 case itos: pop_i(rax); break; 686 case ltos: pop_l(rax, rdx); break; 687 case ftos: 688 if (UseSSE >= 1) { 689 pop_f(xmm0); 690 } else { 691 pop_f(); 692 } 693 break; 694 case dtos: 695 if (UseSSE >= 2) { 696 pop_d(xmm0); 697 } else { 698 pop_d(); 699 } 700 break; 701 case vtos: /* nothing to do */ break; 702 default : ShouldNotReachHere(); 703 } 704 verify_oop(rax, state); 705 } 706 707 708 void InterpreterMacroAssembler::push_l(Register lo, Register hi) { 709 push(hi); 710 push(lo); 711 } 712 713 void InterpreterMacroAssembler::push_f() { 714 // Do not schedule for no AGI! Never write beyond rsp! 715 subptr(rsp, 1 * wordSize); 716 fstp_s(Address(rsp, 0)); 717 } 718 719 void InterpreterMacroAssembler::push_d() { 720 // Do not schedule for no AGI! Never write beyond rsp! 721 subptr(rsp, 2 * wordSize); 722 fstp_d(Address(rsp, 0)); 723 } 724 725 726 void InterpreterMacroAssembler::push(TosState state) { 727 verify_oop(rax, state); 728 switch (state) { 729 case atos: push_ptr(rax); break; 730 case btos: // fall through 731 case ztos: // fall through 732 case ctos: // fall through 733 case stos: // fall through 734 case itos: push_i(rax); break; 735 case ltos: push_l(rax, rdx); break; 736 case ftos: 737 if (UseSSE >= 1) { 738 push_f(xmm0); 739 } else { 740 push_f(); 741 } 742 break; 743 case dtos: 744 if (UseSSE >= 2) { 745 push_d(xmm0); 746 } else { 747 push_d(); 748 } 749 break; 750 case vtos: /* nothing to do */ break; 751 default : ShouldNotReachHere(); 752 } 753 } 754 #endif // _LP64 755 756 757 // Helpers for swap and dup 758 void InterpreterMacroAssembler::load_ptr(int n, Register val) { 759 movptr(val, Address(rsp, Interpreter::expr_offset_in_bytes(n))); 760 } 761 762 void InterpreterMacroAssembler::store_ptr(int n, Register val) { 763 movptr(Address(rsp, Interpreter::expr_offset_in_bytes(n)), val); 764 } 765 766 767 void InterpreterMacroAssembler::prepare_to_jump_from_interpreted() { 768 // set sender sp 769 lea(_bcp_register, Address(rsp, wordSize)); 770 // record last_sp 771 movptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), _bcp_register); 772 } 773 774 775 // Jump to from_interpreted entry of a call unless single stepping is possible 776 // in this thread in which case we must call the i2i entry 777 void InterpreterMacroAssembler::jump_from_interpreted(Register method, Register temp) { 778 prepare_to_jump_from_interpreted(); 779 780 if (JvmtiExport::can_post_interpreter_events()) { 781 Label run_compiled_code; 782 // JVMTI events, such as single-stepping, are implemented partly by avoiding running 783 // compiled code in threads for which the event is enabled. Check here for 784 // interp_only_mode if these events CAN be enabled. 785 // interp_only is an int, on little endian it is sufficient to test the byte only 786 // Is a cmpl faster? 787 LP64_ONLY(temp = r15_thread;) 788 NOT_LP64(get_thread(temp);) 789 cmpb(Address(temp, JavaThread::interp_only_mode_offset()), 0); 790 jccb(Assembler::zero, run_compiled_code); 791 jmp(Address(method, Method::interpreter_entry_offset())); 792 bind(run_compiled_code); 793 } 794 795 jmp(Address(method, Method::from_interpreted_offset())); 796 } 797 798 // void InterpreterMacroAssembler::resolve_special(Register rmethod, LinkInfo link_info) { 799 // CallInfo callinfo; 800 // LinkResolver::resolve_special_call(callinfo, Handle(), link_info, Thread::current()); 801 // methodHandle methodh = callinfo.selected_method(); 802 // assert(methodh.not_null(), "should have thrown exception"); 803 // Method* method = methodh(); 804 // tty->print_cr("call_Java_final method: %p name: %s", method, method->name()->as_C_string()); 805 // // tty->print_cr("call_Java_final const: %p, params: %d locals %d", method->constMethod(), method->constMethod()->_size_of_parameters, method->constMethod()->_max_locals); 806 807 // movptr(rmethod, AddressLiteral((address)method, RelocationHolder::none).addr()); 808 // } 809 810 // void InterpreterMacroAssembler::get_entry(Register entry, Register method) { 811 // // TODO: see InterpreterMacroAssembler::jump_from_interpreted for special cases 812 // Label done; 813 // // if (JvmtiExport::can_post_interpreter_events()) { 814 // // Register temp; 815 // // Label run_compiled_code; 816 // // // JVMTI events, such as single-stepping, are implemented partly by avoiding running 817 // // // compiled code in threads for which the event is enabled. Check here for 818 // // // interp_only_mode if these events CAN be enabled. 819 // // // interp_only is an int, on little endian it is sufficient to test the byte only 820 // // // Is a cmpl faster? 821 // // LP64_ONLY(temp = r15_thread;) 822 // // NOT_LP64(get_thread(temp);) 823 // // cmpb(Address(temp, JavaThread::interp_only_mode_offset()), 0); 824 // // jccb(Assembler::zero, run_compiled_code); 825 // // movptr(entry, Address(method, Method::interpreter_entry_offset())); 826 // // bind(run_compiled_code); 827 // // } 828 // movptr(entry, Address(method, Method::from_interpreted_offset())); 829 // bind(done); 830 // } 831 832 // // loads method into rbx 833 // void InterpreterMacroAssembler::get_entry(Register entry, LinkInfo link_info) { 834 // resolve_special(rbx, link_info); 835 // get_entry(entry, rbx); 836 // } 837 838 // void InterpreterMacroAssembler::call_Java_final(LinkInfo link_info) { 839 // Register rentry = rax; 840 // get_entry(rentry, link_info); 841 842 // // profile_call(rax); // ?? rax 843 // // profile_arguments_type(rax, rbx, rbcp, false); 844 // call(rentry); 845 // } 846 847 // void InterpreterMacroAssembler::jump_Java_final(LinkInfo link_info) { 848 // Register rentry = rax; 849 // get_entry(rentry, link_info); 850 851 // // profile_call(rax); // ?? rax 852 // // profile_arguments_type(rax, rbx, rbcp, false); 853 // jmp(rentry); 854 // } 855 856 // The following two routines provide a hook so that an implementation 857 // can schedule the dispatch in two parts. x86 does not do this. 858 void InterpreterMacroAssembler::dispatch_prolog(TosState state, int step) { 859 // Nothing x86 specific to be done here 860 } 861 862 void InterpreterMacroAssembler::dispatch_epilog(TosState state, int step) { 863 dispatch_next(state, step); 864 } 865 866 void InterpreterMacroAssembler::dispatch_base(TosState state, 867 address* table, 868 bool verifyoop, 869 bool generate_poll) { 870 verify_FPU(1, state); 871 if (VerifyActivationFrameSize) { 872 Label L; 873 mov(rcx, rbp); 874 subptr(rcx, rsp); 875 int32_t min_frame_size = 876 (frame::link_offset - frame::interpreter_frame_initial_sp_offset) * 877 wordSize; 878 cmpptr(rcx, (int32_t)min_frame_size); 879 jcc(Assembler::greaterEqual, L); 880 stop("broken stack frame"); 881 bind(L); 882 } 883 if (verifyoop) { 884 verify_oop(rax, state); 885 } 886 887 address* const safepoint_table = Interpreter::safept_table(state); 888 #ifdef _LP64 889 Label no_safepoint, dispatch; 890 if (SafepointMechanism::uses_thread_local_poll() && table != safepoint_table && generate_poll) { 891 NOT_PRODUCT(block_comment("Thread-local Safepoint poll")); 892 testb(Address(r15_thread, Thread::polling_page_offset()), SafepointMechanism::poll_bit()); 893 894 jccb(Assembler::zero, no_safepoint); 895 lea(rscratch1, ExternalAddress((address)safepoint_table)); 896 jmpb(dispatch); 897 } 898 899 bind(no_safepoint); 900 lea(rscratch1, ExternalAddress((address)table)); 901 bind(dispatch); 902 jmp(Address(rscratch1, rbx, Address::times_8)); 903 904 #else 905 Address index(noreg, rbx, Address::times_ptr); 906 if (SafepointMechanism::uses_thread_local_poll() && table != safepoint_table && generate_poll) { 907 NOT_PRODUCT(block_comment("Thread-local Safepoint poll")); 908 Label no_safepoint; 909 const Register thread = rcx; 910 get_thread(thread); 911 testb(Address(thread, Thread::polling_page_offset()), SafepointMechanism::poll_bit()); 912 913 jccb(Assembler::zero, no_safepoint); 914 ArrayAddress dispatch_addr(ExternalAddress((address)safepoint_table), index); 915 jump(dispatch_addr); 916 bind(no_safepoint); 917 } 918 919 { 920 ArrayAddress dispatch_addr(ExternalAddress((address)table), index); 921 jump(dispatch_addr); 922 } 923 #endif // _LP64 924 } 925 926 void InterpreterMacroAssembler::dispatch_only(TosState state, bool generate_poll) { 927 dispatch_base(state, Interpreter::dispatch_table(state), true, generate_poll); 928 } 929 930 void InterpreterMacroAssembler::dispatch_only_normal(TosState state) { 931 dispatch_base(state, Interpreter::normal_table(state)); 932 } 933 934 void InterpreterMacroAssembler::dispatch_only_noverify(TosState state) { 935 dispatch_base(state, Interpreter::normal_table(state), false); 936 } 937 938 939 void InterpreterMacroAssembler::dispatch_next(TosState state, int step, bool generate_poll) { 940 // load next bytecode (load before advancing _bcp_register to prevent AGI) 941 load_unsigned_byte(rbx, Address(_bcp_register, step)); 942 // advance _bcp_register 943 increment(_bcp_register, step); 944 dispatch_base(state, Interpreter::dispatch_table(state), true, generate_poll); 945 } 946 947 void InterpreterMacroAssembler::dispatch_via(TosState state, address* table) { 948 // load current bytecode 949 load_unsigned_byte(rbx, Address(_bcp_register, 0)); 950 dispatch_base(state, table); 951 } 952 953 void InterpreterMacroAssembler::narrow(Register result) { 954 955 // Get method->_constMethod->_result_type 956 movptr(rcx, Address(rbp, frame::interpreter_frame_method_offset * wordSize)); 957 movptr(rcx, Address(rcx, Method::const_offset())); 958 load_unsigned_byte(rcx, Address(rcx, ConstMethod::result_type_offset())); 959 960 Label done, notBool, notByte, notChar; 961 962 // common case first 963 cmpl(rcx, T_INT); 964 jcc(Assembler::equal, done); 965 966 // mask integer result to narrower return type. 967 cmpl(rcx, T_BOOLEAN); 968 jcc(Assembler::notEqual, notBool); 969 andl(result, 0x1); 970 jmp(done); 971 972 bind(notBool); 973 cmpl(rcx, T_BYTE); 974 jcc(Assembler::notEqual, notByte); 975 LP64_ONLY(movsbl(result, result);) 976 NOT_LP64(shll(result, 24);) // truncate upper 24 bits 977 NOT_LP64(sarl(result, 24);) // and sign-extend byte 978 jmp(done); 979 980 bind(notByte); 981 cmpl(rcx, T_CHAR); 982 jcc(Assembler::notEqual, notChar); 983 LP64_ONLY(movzwl(result, result);) 984 NOT_LP64(andl(result, 0xFFFF);) // truncate upper 16 bits 985 jmp(done); 986 987 bind(notChar); 988 // cmpl(rcx, T_SHORT); // all that's left 989 // jcc(Assembler::notEqual, done); 990 LP64_ONLY(movswl(result, result);) 991 NOT_LP64(shll(result, 16);) // truncate upper 16 bits 992 NOT_LP64(sarl(result, 16);) // and sign-extend short 993 994 // Nothing to do for T_INT 995 bind(done); 996 } 997 998 // remove activation 999 // 1000 // Unlock the receiver if this is a synchronized method. 1001 // Unlock any Java monitors from syncronized blocks. 1002 // Remove the activation from the stack. 1003 // 1004 // If there are locked Java monitors 1005 // If throw_monitor_exception 1006 // throws IllegalMonitorStateException 1007 // Else if install_monitor_exception 1008 // installs IllegalMonitorStateException 1009 // Else 1010 // no error processing 1011 void InterpreterMacroAssembler::remove_activation( 1012 TosState state, 1013 Register ret_addr, 1014 bool throw_monitor_exception, 1015 bool install_monitor_exception, 1016 bool notify_jvmdi) { 1017 // Note: Registers rdx xmm0 may be in use for the 1018 // result check if synchronized method 1019 Label unlocked, unlock, no_unlock; 1020 1021 const Register rthread = LP64_ONLY(r15_thread) NOT_LP64(rcx); 1022 const Register robj = LP64_ONLY(c_rarg1) NOT_LP64(rdx); 1023 const Register rmon = LP64_ONLY(c_rarg1) NOT_LP64(rcx); 1024 // monitor pointers need different register 1025 // because rdx may have the result in it 1026 NOT_LP64(get_thread(rcx);) 1027 1028 // get the value of _do_not_unlock_if_synchronized into rdx 1029 const Address do_not_unlock_if_synchronized(rthread, 1030 in_bytes(JavaThread::do_not_unlock_if_synchronized_offset())); 1031 movbool(rbx, do_not_unlock_if_synchronized); 1032 movbool(do_not_unlock_if_synchronized, false); // reset the flag 1033 1034 // get method access flags 1035 movptr(rcx, Address(rbp, frame::interpreter_frame_method_offset * wordSize)); 1036 movl(rcx, Address(rcx, Method::access_flags_offset())); 1037 testl(rcx, JVM_ACC_SYNCHRONIZED); 1038 jcc(Assembler::zero, unlocked); 1039 1040 // Don't unlock anything if the _do_not_unlock_if_synchronized flag 1041 // is set. 1042 testbool(rbx); 1043 jcc(Assembler::notZero, no_unlock); 1044 1045 // unlock monitor 1046 push(state); // save result 1047 1048 // BasicObjectLock will be first in list, since this is a 1049 // synchronized method. However, need to check that the object has 1050 // not been unlocked by an explicit monitorexit bytecode. 1051 const Address monitor(rbp, frame::interpreter_frame_initial_sp_offset * 1052 wordSize - (int) sizeof(BasicObjectLock)); 1053 // We use c_rarg1/rdx so that if we go slow path it will be the correct 1054 // register for unlock_object to pass to VM directly 1055 lea(robj, monitor); // address of first monitor 1056 1057 movptr(rax, Address(robj, BasicObjectLock::obj_offset_in_bytes())); 1058 testptr(rax, rax); 1059 jcc(Assembler::notZero, unlock); 1060 1061 pop(state); 1062 if (throw_monitor_exception) { 1063 // Entry already unlocked, need to throw exception 1064 NOT_LP64(empty_FPU_stack();) // remove possible return value from FPU-stack, otherwise stack could overflow 1065 call_VM(noreg, CAST_FROM_FN_PTR(address, 1066 InterpreterRuntime::throw_illegal_monitor_state_exception)); 1067 should_not_reach_here(); 1068 } else { 1069 // Monitor already unlocked during a stack unroll. If requested, 1070 // install an illegal_monitor_state_exception. Continue with 1071 // stack unrolling. 1072 if (install_monitor_exception) { 1073 NOT_LP64(empty_FPU_stack();) 1074 call_VM(noreg, CAST_FROM_FN_PTR(address, 1075 InterpreterRuntime::new_illegal_monitor_state_exception)); 1076 } 1077 jmp(unlocked); 1078 } 1079 1080 bind(unlock); 1081 unlock_object(robj); 1082 pop(state); 1083 1084 // Check that for block-structured locking (i.e., that all locked 1085 // objects has been unlocked) 1086 bind(unlocked); 1087 1088 // rax, rdx: Might contain return value 1089 1090 // Check that all monitors are unlocked 1091 { 1092 Label loop, exception, entry, restart; 1093 const int entry_size = frame::interpreter_frame_monitor_size() * wordSize; 1094 const Address monitor_block_top( 1095 rbp, frame::interpreter_frame_monitor_block_top_offset * wordSize); 1096 const Address monitor_block_bot( 1097 rbp, frame::interpreter_frame_initial_sp_offset * wordSize); 1098 1099 bind(restart); 1100 // We use c_rarg1 so that if we go slow path it will be the correct 1101 // register for unlock_object to pass to VM directly 1102 movptr(rmon, monitor_block_top); // points to current entry, starting 1103 // with top-most entry 1104 lea(rbx, monitor_block_bot); // points to word before bottom of 1105 // monitor block 1106 jmp(entry); 1107 1108 // Entry already locked, need to throw exception 1109 bind(exception); 1110 1111 if (throw_monitor_exception) { 1112 // Throw exception 1113 NOT_LP64(empty_FPU_stack();) 1114 MacroAssembler::call_VM(noreg, 1115 CAST_FROM_FN_PTR(address, InterpreterRuntime:: 1116 throw_illegal_monitor_state_exception)); 1117 should_not_reach_here(); 1118 } else { 1119 // Stack unrolling. Unlock object and install illegal_monitor_exception. 1120 // Unlock does not block, so don't have to worry about the frame. 1121 // We don't have to preserve c_rarg1 since we are going to throw an exception. 1122 1123 push(state); 1124 mov(robj, rmon); // nop if robj and rmon are the same 1125 unlock_object(robj); 1126 pop(state); 1127 1128 if (install_monitor_exception) { 1129 NOT_LP64(empty_FPU_stack();) 1130 call_VM(noreg, CAST_FROM_FN_PTR(address, 1131 InterpreterRuntime:: 1132 new_illegal_monitor_state_exception)); 1133 } 1134 1135 jmp(restart); 1136 } 1137 1138 bind(loop); 1139 // check if current entry is used 1140 cmpptr(Address(rmon, BasicObjectLock::obj_offset_in_bytes()), (int32_t) NULL); 1141 jcc(Assembler::notEqual, exception); 1142 1143 addptr(rmon, entry_size); // otherwise advance to next entry 1144 bind(entry); 1145 cmpptr(rmon, rbx); // check if bottom reached 1146 jcc(Assembler::notEqual, loop); // if not at bottom then check this entry 1147 } 1148 1149 bind(no_unlock); 1150 1151 // jvmti support 1152 if (notify_jvmdi) { 1153 notify_method_exit(state, NotifyJVMTI); // preserve TOSCA 1154 } else { 1155 notify_method_exit(state, SkipNotifyJVMTI); // preserve TOSCA 1156 } 1157 1158 // remove activation 1159 // get sender sp 1160 movptr(rbx, 1161 Address(rbp, frame::interpreter_frame_sender_sp_offset * wordSize)); 1162 if (StackReservedPages > 0) { 1163 // testing if reserved zone needs to be re-enabled 1164 Register rthread = LP64_ONLY(r15_thread) NOT_LP64(rcx); 1165 Label no_reserved_zone_enabling; 1166 1167 NOT_LP64(get_thread(rthread);) 1168 1169 cmpl(Address(rthread, JavaThread::stack_guard_state_offset()), JavaThread::stack_guard_enabled); 1170 jcc(Assembler::equal, no_reserved_zone_enabling); 1171 1172 cmpptr(rbx, Address(rthread, JavaThread::reserved_stack_activation_offset())); 1173 jcc(Assembler::lessEqual, no_reserved_zone_enabling); 1174 1175 call_VM_leaf( 1176 CAST_FROM_FN_PTR(address, SharedRuntime::enable_stack_reserved_zone), rthread); 1177 call_VM(noreg, CAST_FROM_FN_PTR(address, 1178 InterpreterRuntime::throw_delayed_StackOverflowError)); 1179 should_not_reach_here(); 1180 1181 bind(no_reserved_zone_enabling); 1182 } 1183 leave(); // remove frame anchor 1184 pop(ret_addr); // get return address 1185 mov(rsp, rbx); // set sp to sender sp 1186 } 1187 1188 void InterpreterMacroAssembler::get_method_counters(Register method, 1189 Register mcs, Label& skip) { 1190 Label has_counters; 1191 movptr(mcs, Address(method, Method::method_counters_offset())); 1192 testptr(mcs, mcs); 1193 jcc(Assembler::notZero, has_counters); 1194 call_VM(noreg, CAST_FROM_FN_PTR(address, 1195 InterpreterRuntime::build_method_counters), method); 1196 movptr(mcs, Address(method,Method::method_counters_offset())); 1197 testptr(mcs, mcs); 1198 jcc(Assembler::zero, skip); // No MethodCounters allocated, OutOfMemory 1199 bind(has_counters); 1200 } 1201 1202 1203 // Lock object 1204 // 1205 // Args: 1206 // rdx, c_rarg1: BasicObjectLock to be used for locking 1207 // 1208 // Kills: 1209 // rax, rbx 1210 void InterpreterMacroAssembler::lock_object(Register lock_reg) { 1211 assert(lock_reg == LP64_ONLY(c_rarg1) NOT_LP64(rdx), 1212 "The argument is only for looks. It must be c_rarg1"); 1213 1214 if (UseHeavyMonitors) { 1215 call_VM(noreg, 1216 CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorenter), 1217 lock_reg); 1218 } else { 1219 Label done; 1220 1221 const Register swap_reg = rax; // Must use rax for cmpxchg instruction 1222 const Register tmp_reg = rbx; // Will be passed to biased_locking_enter to avoid a 1223 // problematic case where tmp_reg = no_reg. 1224 const Register obj_reg = LP64_ONLY(c_rarg3) NOT_LP64(rcx); // Will contain the oop 1225 1226 const int obj_offset = BasicObjectLock::obj_offset_in_bytes(); 1227 const int lock_offset = BasicObjectLock::lock_offset_in_bytes (); 1228 const int mark_offset = lock_offset + 1229 BasicLock::displaced_header_offset_in_bytes(); 1230 1231 Label slow_case; 1232 1233 // Load object pointer into obj_reg 1234 movptr(obj_reg, Address(lock_reg, obj_offset)); 1235 1236 if (UseBiasedLocking) { 1237 biased_locking_enter(lock_reg, obj_reg, swap_reg, tmp_reg, false, done, &slow_case); 1238 } 1239 1240 // Load immediate 1 into swap_reg %rax 1241 movl(swap_reg, (int32_t)1); 1242 1243 // Load (object->mark() | 1) into swap_reg %rax 1244 orptr(swap_reg, Address(obj_reg, oopDesc::mark_offset_in_bytes())); 1245 1246 // Save (object->mark() | 1) into BasicLock's displaced header 1247 movptr(Address(lock_reg, mark_offset), swap_reg); 1248 1249 assert(lock_offset == 0, 1250 "displaced header must be first word in BasicObjectLock"); 1251 1252 if (os::is_MP()) lock(); 1253 cmpxchgptr(lock_reg, Address(obj_reg, oopDesc::mark_offset_in_bytes())); 1254 if (PrintBiasedLockingStatistics) { 1255 cond_inc32(Assembler::zero, 1256 ExternalAddress((address) BiasedLocking::fast_path_entry_count_addr())); 1257 } 1258 jcc(Assembler::zero, done); 1259 1260 const int zero_bits = LP64_ONLY(7) NOT_LP64(3); 1261 1262 // Test if the oopMark is an obvious stack pointer, i.e., 1263 // 1) (mark & zero_bits) == 0, and 1264 // 2) rsp <= mark < mark + os::pagesize() 1265 // 1266 // These 3 tests can be done by evaluating the following 1267 // expression: ((mark - rsp) & (zero_bits - os::vm_page_size())), 1268 // assuming both stack pointer and pagesize have their 1269 // least significant bits clear. 1270 // NOTE: the oopMark is in swap_reg %rax as the result of cmpxchg 1271 subptr(swap_reg, rsp); 1272 andptr(swap_reg, zero_bits - os::vm_page_size()); 1273 1274 // Save the test result, for recursive case, the result is zero 1275 movptr(Address(lock_reg, mark_offset), swap_reg); 1276 1277 if (PrintBiasedLockingStatistics) { 1278 cond_inc32(Assembler::zero, 1279 ExternalAddress((address) BiasedLocking::fast_path_entry_count_addr())); 1280 } 1281 jcc(Assembler::zero, done); 1282 1283 bind(slow_case); 1284 1285 // Call the runtime routine for slow case 1286 call_VM(noreg, 1287 CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorenter), 1288 lock_reg); 1289 1290 bind(done); 1291 } 1292 } 1293 1294 1295 // Unlocks an object. Used in monitorexit bytecode and 1296 // remove_activation. Throws an IllegalMonitorException if object is 1297 // not locked by current thread. 1298 // 1299 // Args: 1300 // rdx, c_rarg1: BasicObjectLock for lock 1301 // 1302 // Kills: 1303 // rax 1304 // c_rarg0, c_rarg1, c_rarg2, c_rarg3, ... (param regs) 1305 // rscratch1 (scratch reg) 1306 // rax, rbx, rcx, rdx 1307 void InterpreterMacroAssembler::unlock_object(Register lock_reg) { 1308 assert(lock_reg == LP64_ONLY(c_rarg1) NOT_LP64(rdx), 1309 "The argument is only for looks. It must be c_rarg1"); 1310 1311 if (UseHeavyMonitors) { 1312 call_VM(noreg, 1313 CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorexit), 1314 lock_reg); 1315 } else { 1316 Label done; 1317 1318 const Register swap_reg = rax; // Must use rax for cmpxchg instruction 1319 const Register header_reg = LP64_ONLY(c_rarg2) NOT_LP64(rbx); // Will contain the old oopMark 1320 const Register obj_reg = LP64_ONLY(c_rarg3) NOT_LP64(rcx); // Will contain the oop 1321 1322 save_bcp(); // Save in case of exception 1323 1324 // Convert from BasicObjectLock structure to object and BasicLock 1325 // structure Store the BasicLock address into %rax 1326 lea(swap_reg, Address(lock_reg, BasicObjectLock::lock_offset_in_bytes())); 1327 1328 // Load oop into obj_reg(%c_rarg3) 1329 movptr(obj_reg, Address(lock_reg, BasicObjectLock::obj_offset_in_bytes())); 1330 1331 // Free entry 1332 movptr(Address(lock_reg, BasicObjectLock::obj_offset_in_bytes()), (int32_t)NULL_WORD); 1333 1334 if (UseBiasedLocking) { 1335 biased_locking_exit(obj_reg, header_reg, done); 1336 } 1337 1338 // Load the old header from BasicLock structure 1339 movptr(header_reg, Address(swap_reg, 1340 BasicLock::displaced_header_offset_in_bytes())); 1341 1342 // Test for recursion 1343 testptr(header_reg, header_reg); 1344 1345 // zero for recursive case 1346 jcc(Assembler::zero, done); 1347 1348 // Atomic swap back the old header 1349 if (os::is_MP()) lock(); 1350 cmpxchgptr(header_reg, Address(obj_reg, oopDesc::mark_offset_in_bytes())); 1351 1352 // zero for simple unlock of a stack-lock case 1353 jcc(Assembler::zero, done); 1354 1355 // Call the runtime routine for slow case. 1356 movptr(Address(lock_reg, BasicObjectLock::obj_offset_in_bytes()), 1357 obj_reg); // restore obj 1358 call_VM(noreg, 1359 CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorexit), 1360 lock_reg); 1361 1362 bind(done); 1363 1364 restore_bcp(); 1365 } 1366 } 1367 1368 void InterpreterMacroAssembler::test_method_data_pointer(Register mdp, 1369 Label& zero_continue) { 1370 assert(ProfileInterpreter, "must be profiling interpreter"); 1371 movptr(mdp, Address(rbp, frame::interpreter_frame_mdp_offset * wordSize)); 1372 testptr(mdp, mdp); 1373 jcc(Assembler::zero, zero_continue); 1374 } 1375 1376 1377 // Set the method data pointer for the current bcp. 1378 void InterpreterMacroAssembler::set_method_data_pointer_for_bcp() { 1379 assert(ProfileInterpreter, "must be profiling interpreter"); 1380 Label set_mdp; 1381 push(rax); 1382 push(rbx); 1383 1384 get_method(rbx); 1385 // Test MDO to avoid the call if it is NULL. 1386 movptr(rax, Address(rbx, in_bytes(Method::method_data_offset()))); 1387 testptr(rax, rax); 1388 jcc(Assembler::zero, set_mdp); 1389 // rbx: method 1390 // _bcp_register: bcp 1391 call_VM_leaf(CAST_FROM_FN_PTR(address, InterpreterRuntime::bcp_to_di), rbx, _bcp_register); 1392 // rax: mdi 1393 // mdo is guaranteed to be non-zero here, we checked for it before the call. 1394 movptr(rbx, Address(rbx, in_bytes(Method::method_data_offset()))); 1395 addptr(rbx, in_bytes(MethodData::data_offset())); 1396 addptr(rax, rbx); 1397 bind(set_mdp); 1398 movptr(Address(rbp, frame::interpreter_frame_mdp_offset * wordSize), rax); 1399 pop(rbx); 1400 pop(rax); 1401 } 1402 1403 void InterpreterMacroAssembler::verify_method_data_pointer() { 1404 assert(ProfileInterpreter, "must be profiling interpreter"); 1405 #ifdef ASSERT 1406 Label verify_continue; 1407 push(rax); 1408 push(rbx); 1409 Register arg3_reg = LP64_ONLY(c_rarg3) NOT_LP64(rcx); 1410 Register arg2_reg = LP64_ONLY(c_rarg2) NOT_LP64(rdx); 1411 push(arg3_reg); 1412 push(arg2_reg); 1413 test_method_data_pointer(arg3_reg, verify_continue); // If mdp is zero, continue 1414 get_method(rbx); 1415 1416 // If the mdp is valid, it will point to a DataLayout header which is 1417 // consistent with the bcp. The converse is highly probable also. 1418 load_unsigned_short(arg2_reg, 1419 Address(arg3_reg, in_bytes(DataLayout::bci_offset()))); 1420 addptr(arg2_reg, Address(rbx, Method::const_offset())); 1421 lea(arg2_reg, Address(arg2_reg, ConstMethod::codes_offset())); 1422 cmpptr(arg2_reg, _bcp_register); 1423 jcc(Assembler::equal, verify_continue); 1424 // rbx: method 1425 // _bcp_register: bcp 1426 // c_rarg3: mdp 1427 call_VM_leaf(CAST_FROM_FN_PTR(address, InterpreterRuntime::verify_mdp), 1428 rbx, _bcp_register, arg3_reg); 1429 bind(verify_continue); 1430 pop(arg2_reg); 1431 pop(arg3_reg); 1432 pop(rbx); 1433 pop(rax); 1434 #endif // ASSERT 1435 } 1436 1437 1438 void InterpreterMacroAssembler::set_mdp_data_at(Register mdp_in, 1439 int constant, 1440 Register value) { 1441 assert(ProfileInterpreter, "must be profiling interpreter"); 1442 Address data(mdp_in, constant); 1443 movptr(data, value); 1444 } 1445 1446 1447 void InterpreterMacroAssembler::increment_mdp_data_at(Register mdp_in, 1448 int constant, 1449 bool decrement) { 1450 // Counter address 1451 Address data(mdp_in, constant); 1452 1453 increment_mdp_data_at(data, decrement); 1454 } 1455 1456 void InterpreterMacroAssembler::increment_mdp_data_at(Address data, 1457 bool decrement) { 1458 assert(ProfileInterpreter, "must be profiling interpreter"); 1459 // %%% this does 64bit counters at best it is wasting space 1460 // at worst it is a rare bug when counters overflow 1461 1462 if (decrement) { 1463 // Decrement the register. Set condition codes. 1464 addptr(data, (int32_t) -DataLayout::counter_increment); 1465 // If the decrement causes the counter to overflow, stay negative 1466 Label L; 1467 jcc(Assembler::negative, L); 1468 addptr(data, (int32_t) DataLayout::counter_increment); 1469 bind(L); 1470 } else { 1471 assert(DataLayout::counter_increment == 1, 1472 "flow-free idiom only works with 1"); 1473 // Increment the register. Set carry flag. 1474 addptr(data, DataLayout::counter_increment); 1475 // If the increment causes the counter to overflow, pull back by 1. 1476 sbbptr(data, (int32_t)0); 1477 } 1478 } 1479 1480 1481 void InterpreterMacroAssembler::increment_mdp_data_at(Register mdp_in, 1482 Register reg, 1483 int constant, 1484 bool decrement) { 1485 Address data(mdp_in, reg, Address::times_1, constant); 1486 1487 increment_mdp_data_at(data, decrement); 1488 } 1489 1490 void InterpreterMacroAssembler::set_mdp_flag_at(Register mdp_in, 1491 int flag_byte_constant) { 1492 assert(ProfileInterpreter, "must be profiling interpreter"); 1493 int header_offset = in_bytes(DataLayout::header_offset()); 1494 int header_bits = DataLayout::flag_mask_to_header_mask(flag_byte_constant); 1495 // Set the flag 1496 orl(Address(mdp_in, header_offset), header_bits); 1497 } 1498 1499 1500 1501 void InterpreterMacroAssembler::test_mdp_data_at(Register mdp_in, 1502 int offset, 1503 Register value, 1504 Register test_value_out, 1505 Label& not_equal_continue) { 1506 assert(ProfileInterpreter, "must be profiling interpreter"); 1507 if (test_value_out == noreg) { 1508 cmpptr(value, Address(mdp_in, offset)); 1509 } else { 1510 // Put the test value into a register, so caller can use it: 1511 movptr(test_value_out, Address(mdp_in, offset)); 1512 cmpptr(test_value_out, value); 1513 } 1514 jcc(Assembler::notEqual, not_equal_continue); 1515 } 1516 1517 1518 void InterpreterMacroAssembler::update_mdp_by_offset(Register mdp_in, 1519 int offset_of_disp) { 1520 assert(ProfileInterpreter, "must be profiling interpreter"); 1521 Address disp_address(mdp_in, offset_of_disp); 1522 addptr(mdp_in, disp_address); 1523 movptr(Address(rbp, frame::interpreter_frame_mdp_offset * wordSize), mdp_in); 1524 } 1525 1526 1527 void InterpreterMacroAssembler::update_mdp_by_offset(Register mdp_in, 1528 Register reg, 1529 int offset_of_disp) { 1530 assert(ProfileInterpreter, "must be profiling interpreter"); 1531 Address disp_address(mdp_in, reg, Address::times_1, offset_of_disp); 1532 addptr(mdp_in, disp_address); 1533 movptr(Address(rbp, frame::interpreter_frame_mdp_offset * wordSize), mdp_in); 1534 } 1535 1536 1537 void InterpreterMacroAssembler::update_mdp_by_constant(Register mdp_in, 1538 int constant) { 1539 assert(ProfileInterpreter, "must be profiling interpreter"); 1540 addptr(mdp_in, constant); 1541 movptr(Address(rbp, frame::interpreter_frame_mdp_offset * wordSize), mdp_in); 1542 } 1543 1544 1545 void InterpreterMacroAssembler::update_mdp_for_ret(Register return_bci) { 1546 assert(ProfileInterpreter, "must be profiling interpreter"); 1547 push(return_bci); // save/restore across call_VM 1548 call_VM(noreg, 1549 CAST_FROM_FN_PTR(address, InterpreterRuntime::update_mdp_for_ret), 1550 return_bci); 1551 pop(return_bci); 1552 } 1553 1554 1555 void InterpreterMacroAssembler::profile_taken_branch(Register mdp, 1556 Register bumped_count) { 1557 if (ProfileInterpreter) { 1558 Label profile_continue; 1559 1560 // If no method data exists, go to profile_continue. 1561 // Otherwise, assign to mdp 1562 test_method_data_pointer(mdp, profile_continue); 1563 1564 // We are taking a branch. Increment the taken count. 1565 // We inline increment_mdp_data_at to return bumped_count in a register 1566 //increment_mdp_data_at(mdp, in_bytes(JumpData::taken_offset())); 1567 Address data(mdp, in_bytes(JumpData::taken_offset())); 1568 movptr(bumped_count, data); 1569 assert(DataLayout::counter_increment == 1, 1570 "flow-free idiom only works with 1"); 1571 addptr(bumped_count, DataLayout::counter_increment); 1572 sbbptr(bumped_count, 0); 1573 movptr(data, bumped_count); // Store back out 1574 1575 // The method data pointer needs to be updated to reflect the new target. 1576 update_mdp_by_offset(mdp, in_bytes(JumpData::displacement_offset())); 1577 bind(profile_continue); 1578 } 1579 } 1580 1581 1582 void InterpreterMacroAssembler::profile_not_taken_branch(Register mdp) { 1583 if (ProfileInterpreter) { 1584 Label profile_continue; 1585 1586 // If no method data exists, go to profile_continue. 1587 test_method_data_pointer(mdp, profile_continue); 1588 1589 // We are taking a branch. Increment the not taken count. 1590 increment_mdp_data_at(mdp, in_bytes(BranchData::not_taken_offset())); 1591 1592 // The method data pointer needs to be updated to correspond to 1593 // the next bytecode 1594 update_mdp_by_constant(mdp, in_bytes(BranchData::branch_data_size())); 1595 bind(profile_continue); 1596 } 1597 } 1598 1599 void InterpreterMacroAssembler::profile_call(Register mdp) { 1600 if (ProfileInterpreter) { 1601 Label profile_continue; 1602 1603 // If no method data exists, go to profile_continue. 1604 test_method_data_pointer(mdp, profile_continue); 1605 1606 // We are making a call. Increment the count. 1607 increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset())); 1608 1609 // The method data pointer needs to be updated to reflect the new target. 1610 update_mdp_by_constant(mdp, in_bytes(CounterData::counter_data_size())); 1611 bind(profile_continue); 1612 } 1613 } 1614 1615 1616 void InterpreterMacroAssembler::profile_final_call(Register mdp) { 1617 if (ProfileInterpreter) { 1618 Label profile_continue; 1619 1620 // If no method data exists, go to profile_continue. 1621 test_method_data_pointer(mdp, profile_continue); 1622 1623 // We are making a call. Increment the count. 1624 increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset())); 1625 1626 // The method data pointer needs to be updated to reflect the new target. 1627 update_mdp_by_constant(mdp, 1628 in_bytes(VirtualCallData:: 1629 virtual_call_data_size())); 1630 bind(profile_continue); 1631 } 1632 } 1633 1634 1635 void InterpreterMacroAssembler::profile_virtual_call(Register receiver, 1636 Register mdp, 1637 Register reg2, 1638 bool receiver_can_be_null) { 1639 if (ProfileInterpreter) { 1640 Label profile_continue; 1641 1642 // If no method data exists, go to profile_continue. 1643 test_method_data_pointer(mdp, profile_continue); 1644 1645 Label skip_receiver_profile; 1646 if (receiver_can_be_null) { 1647 Label not_null; 1648 testptr(receiver, receiver); 1649 jccb(Assembler::notZero, not_null); 1650 // We are making a call. Increment the count for null receiver. 1651 increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset())); 1652 jmp(skip_receiver_profile); 1653 bind(not_null); 1654 } 1655 1656 // Record the receiver type. 1657 record_klass_in_profile(receiver, mdp, reg2, true); 1658 bind(skip_receiver_profile); 1659 1660 // The method data pointer needs to be updated to reflect the new target. 1661 #if INCLUDE_JVMCI 1662 if (MethodProfileWidth == 0) { 1663 update_mdp_by_constant(mdp, in_bytes(VirtualCallData::virtual_call_data_size())); 1664 } 1665 #else // INCLUDE_JVMCI 1666 update_mdp_by_constant(mdp, 1667 in_bytes(VirtualCallData:: 1668 virtual_call_data_size())); 1669 #endif // INCLUDE_JVMCI 1670 bind(profile_continue); 1671 } 1672 } 1673 1674 #if INCLUDE_JVMCI 1675 void InterpreterMacroAssembler::profile_called_method(Register method, Register mdp, Register reg2) { 1676 assert_different_registers(method, mdp, reg2); 1677 if (ProfileInterpreter && MethodProfileWidth > 0) { 1678 Label profile_continue; 1679 1680 // If no method data exists, go to profile_continue. 1681 test_method_data_pointer(mdp, profile_continue); 1682 1683 Label done; 1684 record_item_in_profile_helper(method, mdp, reg2, 0, done, MethodProfileWidth, 1685 &VirtualCallData::method_offset, &VirtualCallData::method_count_offset, in_bytes(VirtualCallData::nonprofiled_receiver_count_offset())); 1686 bind(done); 1687 1688 update_mdp_by_constant(mdp, in_bytes(VirtualCallData::virtual_call_data_size())); 1689 bind(profile_continue); 1690 } 1691 } 1692 #endif // INCLUDE_JVMCI 1693 1694 // This routine creates a state machine for updating the multi-row 1695 // type profile at a virtual call site (or other type-sensitive bytecode). 1696 // The machine visits each row (of receiver/count) until the receiver type 1697 // is found, or until it runs out of rows. At the same time, it remembers 1698 // the location of the first empty row. (An empty row records null for its 1699 // receiver, and can be allocated for a newly-observed receiver type.) 1700 // Because there are two degrees of freedom in the state, a simple linear 1701 // search will not work; it must be a decision tree. Hence this helper 1702 // function is recursive, to generate the required tree structured code. 1703 // It's the interpreter, so we are trading off code space for speed. 1704 // See below for example code. 1705 void InterpreterMacroAssembler::record_klass_in_profile_helper( 1706 Register receiver, Register mdp, 1707 Register reg2, int start_row, 1708 Label& done, bool is_virtual_call) { 1709 if (TypeProfileWidth == 0) { 1710 if (is_virtual_call) { 1711 increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset())); 1712 } 1713 #if INCLUDE_JVMCI 1714 else if (EnableJVMCI) { 1715 increment_mdp_data_at(mdp, in_bytes(ReceiverTypeData::nonprofiled_receiver_count_offset())); 1716 } 1717 #endif // INCLUDE_JVMCI 1718 } else { 1719 int non_profiled_offset = -1; 1720 if (is_virtual_call) { 1721 non_profiled_offset = in_bytes(CounterData::count_offset()); 1722 } 1723 #if INCLUDE_JVMCI 1724 else if (EnableJVMCI) { 1725 non_profiled_offset = in_bytes(ReceiverTypeData::nonprofiled_receiver_count_offset()); 1726 } 1727 #endif // INCLUDE_JVMCI 1728 1729 record_item_in_profile_helper(receiver, mdp, reg2, 0, done, TypeProfileWidth, 1730 &VirtualCallData::receiver_offset, &VirtualCallData::receiver_count_offset, non_profiled_offset); 1731 } 1732 } 1733 1734 void InterpreterMacroAssembler::record_item_in_profile_helper(Register item, Register mdp, 1735 Register reg2, int start_row, Label& done, int total_rows, 1736 OffsetFunction item_offset_fn, OffsetFunction item_count_offset_fn, 1737 int non_profiled_offset) { 1738 int last_row = total_rows - 1; 1739 assert(start_row <= last_row, "must be work left to do"); 1740 // Test this row for both the item and for null. 1741 // Take any of three different outcomes: 1742 // 1. found item => increment count and goto done 1743 // 2. found null => keep looking for case 1, maybe allocate this cell 1744 // 3. found something else => keep looking for cases 1 and 2 1745 // Case 3 is handled by a recursive call. 1746 for (int row = start_row; row <= last_row; row++) { 1747 Label next_test; 1748 bool test_for_null_also = (row == start_row); 1749 1750 // See if the item is item[n]. 1751 int item_offset = in_bytes(item_offset_fn(row)); 1752 test_mdp_data_at(mdp, item_offset, item, 1753 (test_for_null_also ? reg2 : noreg), 1754 next_test); 1755 // (Reg2 now contains the item from the CallData.) 1756 1757 // The item is item[n]. Increment count[n]. 1758 int count_offset = in_bytes(item_count_offset_fn(row)); 1759 increment_mdp_data_at(mdp, count_offset); 1760 jmp(done); 1761 bind(next_test); 1762 1763 if (test_for_null_also) { 1764 Label found_null; 1765 // Failed the equality check on item[n]... Test for null. 1766 testptr(reg2, reg2); 1767 if (start_row == last_row) { 1768 // The only thing left to do is handle the null case. 1769 if (non_profiled_offset >= 0) { 1770 jccb(Assembler::zero, found_null); 1771 // Item did not match any saved item and there is no empty row for it. 1772 // Increment total counter to indicate polymorphic case. 1773 increment_mdp_data_at(mdp, non_profiled_offset); 1774 jmp(done); 1775 bind(found_null); 1776 } else { 1777 jcc(Assembler::notZero, done); 1778 } 1779 break; 1780 } 1781 // Since null is rare, make it be the branch-taken case. 1782 jcc(Assembler::zero, found_null); 1783 1784 // Put all the "Case 3" tests here. 1785 record_item_in_profile_helper(item, mdp, reg2, start_row + 1, done, total_rows, 1786 item_offset_fn, item_count_offset_fn, non_profiled_offset); 1787 1788 // Found a null. Keep searching for a matching item, 1789 // but remember that this is an empty (unused) slot. 1790 bind(found_null); 1791 } 1792 } 1793 1794 // In the fall-through case, we found no matching item, but we 1795 // observed the item[start_row] is NULL. 1796 1797 // Fill in the item field and increment the count. 1798 int item_offset = in_bytes(item_offset_fn(start_row)); 1799 set_mdp_data_at(mdp, item_offset, item); 1800 int count_offset = in_bytes(item_count_offset_fn(start_row)); 1801 movl(reg2, DataLayout::counter_increment); 1802 set_mdp_data_at(mdp, count_offset, reg2); 1803 if (start_row > 0) { 1804 jmp(done); 1805 } 1806 } 1807 1808 // Example state machine code for three profile rows: 1809 // // main copy of decision tree, rooted at row[1] 1810 // if (row[0].rec == rec) { row[0].incr(); goto done; } 1811 // if (row[0].rec != NULL) { 1812 // // inner copy of decision tree, rooted at row[1] 1813 // if (row[1].rec == rec) { row[1].incr(); goto done; } 1814 // if (row[1].rec != NULL) { 1815 // // degenerate decision tree, rooted at row[2] 1816 // if (row[2].rec == rec) { row[2].incr(); goto done; } 1817 // if (row[2].rec != NULL) { count.incr(); goto done; } // overflow 1818 // row[2].init(rec); goto done; 1819 // } else { 1820 // // remember row[1] is empty 1821 // if (row[2].rec == rec) { row[2].incr(); goto done; } 1822 // row[1].init(rec); goto done; 1823 // } 1824 // } else { 1825 // // remember row[0] is empty 1826 // if (row[1].rec == rec) { row[1].incr(); goto done; } 1827 // if (row[2].rec == rec) { row[2].incr(); goto done; } 1828 // row[0].init(rec); goto done; 1829 // } 1830 // done: 1831 1832 void InterpreterMacroAssembler::record_klass_in_profile(Register receiver, 1833 Register mdp, Register reg2, 1834 bool is_virtual_call) { 1835 assert(ProfileInterpreter, "must be profiling"); 1836 Label done; 1837 1838 record_klass_in_profile_helper(receiver, mdp, reg2, 0, done, is_virtual_call); 1839 1840 bind (done); 1841 } 1842 1843 void InterpreterMacroAssembler::profile_ret(Register return_bci, 1844 Register mdp) { 1845 if (ProfileInterpreter) { 1846 Label profile_continue; 1847 uint row; 1848 1849 // If no method data exists, go to profile_continue. 1850 test_method_data_pointer(mdp, profile_continue); 1851 1852 // Update the total ret count. 1853 increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset())); 1854 1855 for (row = 0; row < RetData::row_limit(); row++) { 1856 Label next_test; 1857 1858 // See if return_bci is equal to bci[n]: 1859 test_mdp_data_at(mdp, 1860 in_bytes(RetData::bci_offset(row)), 1861 return_bci, noreg, 1862 next_test); 1863 1864 // return_bci is equal to bci[n]. Increment the count. 1865 increment_mdp_data_at(mdp, in_bytes(RetData::bci_count_offset(row))); 1866 1867 // The method data pointer needs to be updated to reflect the new target. 1868 update_mdp_by_offset(mdp, 1869 in_bytes(RetData::bci_displacement_offset(row))); 1870 jmp(profile_continue); 1871 bind(next_test); 1872 } 1873 1874 update_mdp_for_ret(return_bci); 1875 1876 bind(profile_continue); 1877 } 1878 } 1879 1880 1881 void InterpreterMacroAssembler::profile_null_seen(Register mdp) { 1882 if (ProfileInterpreter) { 1883 Label profile_continue; 1884 1885 // If no method data exists, go to profile_continue. 1886 test_method_data_pointer(mdp, profile_continue); 1887 1888 set_mdp_flag_at(mdp, BitData::null_seen_byte_constant()); 1889 1890 // The method data pointer needs to be updated. 1891 int mdp_delta = in_bytes(BitData::bit_data_size()); 1892 if (TypeProfileCasts) { 1893 mdp_delta = in_bytes(VirtualCallData::virtual_call_data_size()); 1894 } 1895 update_mdp_by_constant(mdp, mdp_delta); 1896 1897 bind(profile_continue); 1898 } 1899 } 1900 1901 1902 void InterpreterMacroAssembler::profile_typecheck_failed(Register mdp) { 1903 if (ProfileInterpreter && TypeProfileCasts) { 1904 Label profile_continue; 1905 1906 // If no method data exists, go to profile_continue. 1907 test_method_data_pointer(mdp, profile_continue); 1908 1909 int count_offset = in_bytes(CounterData::count_offset()); 1910 // Back up the address, since we have already bumped the mdp. 1911 count_offset -= in_bytes(VirtualCallData::virtual_call_data_size()); 1912 1913 // *Decrement* the counter. We expect to see zero or small negatives. 1914 increment_mdp_data_at(mdp, count_offset, true); 1915 1916 bind (profile_continue); 1917 } 1918 } 1919 1920 1921 void InterpreterMacroAssembler::profile_typecheck(Register mdp, Register klass, Register reg2) { 1922 if (ProfileInterpreter) { 1923 Label profile_continue; 1924 1925 // If no method data exists, go to profile_continue. 1926 test_method_data_pointer(mdp, profile_continue); 1927 1928 // The method data pointer needs to be updated. 1929 int mdp_delta = in_bytes(BitData::bit_data_size()); 1930 if (TypeProfileCasts) { 1931 mdp_delta = in_bytes(VirtualCallData::virtual_call_data_size()); 1932 1933 // Record the object type. 1934 record_klass_in_profile(klass, mdp, reg2, false); 1935 NOT_LP64(assert(reg2 == rdi, "we know how to fix this blown reg");) 1936 NOT_LP64(restore_locals();) // Restore EDI 1937 } 1938 update_mdp_by_constant(mdp, mdp_delta); 1939 1940 bind(profile_continue); 1941 } 1942 } 1943 1944 1945 void InterpreterMacroAssembler::profile_switch_default(Register mdp) { 1946 if (ProfileInterpreter) { 1947 Label profile_continue; 1948 1949 // If no method data exists, go to profile_continue. 1950 test_method_data_pointer(mdp, profile_continue); 1951 1952 // Update the default case count 1953 increment_mdp_data_at(mdp, 1954 in_bytes(MultiBranchData::default_count_offset())); 1955 1956 // The method data pointer needs to be updated. 1957 update_mdp_by_offset(mdp, 1958 in_bytes(MultiBranchData:: 1959 default_displacement_offset())); 1960 1961 bind(profile_continue); 1962 } 1963 } 1964 1965 1966 void InterpreterMacroAssembler::profile_switch_case(Register index, 1967 Register mdp, 1968 Register reg2) { 1969 if (ProfileInterpreter) { 1970 Label profile_continue; 1971 1972 // If no method data exists, go to profile_continue. 1973 test_method_data_pointer(mdp, profile_continue); 1974 1975 // Build the base (index * per_case_size_in_bytes()) + 1976 // case_array_offset_in_bytes() 1977 movl(reg2, in_bytes(MultiBranchData::per_case_size())); 1978 imulptr(index, reg2); // XXX l ? 1979 addptr(index, in_bytes(MultiBranchData::case_array_offset())); // XXX l ? 1980 1981 // Update the case count 1982 increment_mdp_data_at(mdp, 1983 index, 1984 in_bytes(MultiBranchData::relative_count_offset())); 1985 1986 // The method data pointer needs to be updated. 1987 update_mdp_by_offset(mdp, 1988 index, 1989 in_bytes(MultiBranchData:: 1990 relative_displacement_offset())); 1991 1992 bind(profile_continue); 1993 } 1994 } 1995 1996 1997 1998 void InterpreterMacroAssembler::verify_oop(Register reg, TosState state) { 1999 if (state == atos) { 2000 MacroAssembler::verify_oop(reg); 2001 } 2002 } 2003 2004 void InterpreterMacroAssembler::verify_FPU(int stack_depth, TosState state) { 2005 #ifndef _LP64 2006 if ((state == ftos && UseSSE < 1) || 2007 (state == dtos && UseSSE < 2)) { 2008 MacroAssembler::verify_FPU(stack_depth); 2009 } 2010 #endif 2011 } 2012 2013 // Jump if ((*counter_addr += increment) & mask) satisfies the condition. 2014 void InterpreterMacroAssembler::increment_mask_and_jump(Address counter_addr, 2015 int increment, Address mask, 2016 Register scratch, bool preloaded, 2017 Condition cond, Label* where) { 2018 if (!preloaded) { 2019 movl(scratch, counter_addr); 2020 } 2021 incrementl(scratch, increment); 2022 movl(counter_addr, scratch); 2023 andl(scratch, mask); 2024 jcc(cond, *where); 2025 } 2026 2027 void InterpreterMacroAssembler::notify_method_entry() { 2028 // Whenever JVMTI is interp_only_mode, method entry/exit events are sent to 2029 // track stack depth. If it is possible to enter interp_only_mode we add 2030 // the code to check if the event should be sent. 2031 Register rthread = LP64_ONLY(r15_thread) NOT_LP64(rcx); 2032 Register rarg = LP64_ONLY(c_rarg1) NOT_LP64(rbx); 2033 if (JvmtiExport::can_post_interpreter_events()) { 2034 Label L; 2035 NOT_LP64(get_thread(rthread);) 2036 movl(rdx, Address(rthread, JavaThread::interp_only_mode_offset())); 2037 testl(rdx, rdx); 2038 jcc(Assembler::zero, L); 2039 call_VM(noreg, CAST_FROM_FN_PTR(address, 2040 InterpreterRuntime::post_method_entry)); 2041 bind(L); 2042 } 2043 2044 { 2045 SkipIfEqual skip(this, &DTraceMethodProbes, false); 2046 NOT_LP64(get_thread(rthread);) 2047 get_method(rarg); 2048 call_VM_leaf(CAST_FROM_FN_PTR(address, SharedRuntime::dtrace_method_entry), 2049 rthread, rarg); 2050 } 2051 2052 // RedefineClasses() tracing support for obsolete method entry 2053 if (log_is_enabled(Trace, redefine, class, obsolete)) { 2054 NOT_LP64(get_thread(rthread);) 2055 get_method(rarg); 2056 call_VM_leaf( 2057 CAST_FROM_FN_PTR(address, SharedRuntime::rc_trace_method_entry), 2058 rthread, rarg); 2059 } 2060 } 2061 2062 2063 void InterpreterMacroAssembler::notify_method_exit( 2064 TosState state, NotifyMethodExitMode mode) { 2065 // Whenever JVMTI is interp_only_mode, method entry/exit events are sent to 2066 // track stack depth. If it is possible to enter interp_only_mode we add 2067 // the code to check if the event should be sent. 2068 Register rthread = LP64_ONLY(r15_thread) NOT_LP64(rcx); 2069 Register rarg = LP64_ONLY(c_rarg1) NOT_LP64(rbx); 2070 if (mode == NotifyJVMTI && JvmtiExport::can_post_interpreter_events()) { 2071 Label L; 2072 // Note: frame::interpreter_frame_result has a dependency on how the 2073 // method result is saved across the call to post_method_exit. If this 2074 // is changed then the interpreter_frame_result implementation will 2075 // need to be updated too. 2076 2077 // template interpreter will leave the result on the top of the stack. 2078 push(state); 2079 NOT_LP64(get_thread(rthread);) 2080 movl(rdx, Address(rthread, JavaThread::interp_only_mode_offset())); 2081 testl(rdx, rdx); 2082 jcc(Assembler::zero, L); 2083 call_VM(noreg, 2084 CAST_FROM_FN_PTR(address, InterpreterRuntime::post_method_exit)); 2085 bind(L); 2086 pop(state); 2087 } 2088 2089 { 2090 SkipIfEqual skip(this, &DTraceMethodProbes, false); 2091 push(state); 2092 NOT_LP64(get_thread(rthread);) 2093 get_method(rarg); 2094 call_VM_leaf(CAST_FROM_FN_PTR(address, SharedRuntime::dtrace_method_exit), 2095 rthread, rarg); 2096 pop(state); 2097 } 2098 }