Print this page
Split |
Close |
Expand all |
Collapse all |
--- old/src/cpu/sparc/vm/methodHandles_sparc.cpp
+++ new/src/cpu/sparc/vm/methodHandles_sparc.cpp
1 1 /*
2 - * Copyright 1997-2009 Sun Microsystems, Inc. All Rights Reserved.
2 + * Copyright 2008-2010 Sun Microsystems, Inc. All Rights Reserved.
3 3 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
4 4 *
5 5 * This code is free software; you can redistribute it and/or modify it
6 6 * under the terms of the GNU General Public License version 2 only, as
7 7 * published by the Free Software Foundation.
8 8 *
9 9 * This code is distributed in the hope that it will be useful, but WITHOUT
10 10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
12 12 * version 2 for more details (a copy is included in the LICENSE file that
13 13 * accompanied this code).
14 14 *
15 15 * You should have received a copy of the GNU General Public License version
16 16 * 2 along with this work; if not, write to the Free Software Foundation,
17 17 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
18 18 *
19 19 * Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara,
20 20 * CA 95054 USA or visit www.sun.com if you need additional information or
21 21 * have any questions.
↓ open down ↓ |
9 lines elided |
↑ open up ↑ |
22 22 *
23 23 */
24 24
25 25 #include "incls/_precompiled.incl"
26 26 #include "incls/_methodHandles_sparc.cpp.incl"
27 27
28 28 #define __ _masm->
29 29
30 30 address MethodHandleEntry::start_compiled_entry(MacroAssembler* _masm,
31 31 address interpreted_entry) {
32 + // Just before the actual machine code entry point, allocate space
33 + // for a MethodHandleEntry::Data record, so that we can manage everything
34 + // from one base pointer.
32 35 __ align(wordSize);
33 36 address target = __ pc() + sizeof(Data);
34 37 while (__ pc() < target) {
35 38 __ nop();
36 39 __ align(wordSize);
37 40 }
38 41
39 42 MethodHandleEntry* me = (MethodHandleEntry*) __ pc();
40 43 me->set_end_address(__ pc()); // set a temporary end_address
41 44 me->set_from_interpreted_entry(interpreted_entry);
42 45 me->set_type_checking_entry(NULL);
43 46
44 47 return (address) me;
45 48 }
46 49
47 50 MethodHandleEntry* MethodHandleEntry::finish_compiled_entry(MacroAssembler* _masm,
48 51 address start_addr) {
49 52 MethodHandleEntry* me = (MethodHandleEntry*) start_addr;
50 53 assert(me->end_address() == start_addr, "valid ME");
51 54
↓ open down ↓ |
10 lines elided |
↑ open up ↑ |
52 55 // Fill in the real end_address:
53 56 __ align(wordSize);
54 57 me->set_end_address(__ pc());
55 58
56 59 return me;
57 60 }
58 61
59 62
60 63 // Code generation
61 64 address MethodHandles::generate_method_handle_interpreter_entry(MacroAssembler* _masm) {
62 - ShouldNotReachHere(); //NYI, 6815692
63 - return NULL;
65 + // I5_savedSP: sender SP (must preserve)
66 + // G4 (Gargs): incoming argument list (must preserve)
67 + // G5_method: invoke methodOop; becomes method type.
68 + // G3_method_handle: receiver method handle (must load from sp[MethodTypeForm.vmslots])
69 + // O0, O1: garbage temps, blown away
70 + Register O0_argslot = O0;
71 + Register O1_scratch = O1;
72 +
73 + // emit WrongMethodType path first, to enable back-branch from main path
74 + Label wrong_method_type;
75 + __ bind(wrong_method_type);
76 + __ jump_to(AddressLiteral(Interpreter::throw_WrongMethodType_entry()), O1_scratch);
77 + __ delayed()->nop();
78 +
79 + // here's where control starts out:
80 + __ align(CodeEntryAlignment);
81 + address entry_point = __ pc();
82 +
83 + // fetch the MethodType from the method handle into G5_method_type
84 + {
85 + Register tem = G5_method;
86 + assert(tem == G5_method_type, "yes, it's the same register");
87 + for (jint* pchase = methodOopDesc::method_type_offsets_chain(); (*pchase) != -1; pchase++) {
88 + __ ld_ptr(Address(tem, *pchase), G5_method_type);
89 + }
90 + }
91 +
92 + // given the MethodType, find out where the MH argument is buried
93 + __ ld_ptr(Address(G5_method_type, __ delayed_value(java_dyn_MethodType::form_offset_in_bytes, O1_scratch)), O0_argslot);
94 + __ ldsw( Address(O0_argslot, __ delayed_value(java_dyn_MethodTypeForm::vmslots_offset_in_bytes, O1_scratch)), O0_argslot);
95 + __ ld_ptr(__ argument_address(O0_argslot), G3_method_handle);
96 +
97 + __ check_method_handle_type(G5_method_type, G3_method_handle, O1_scratch, wrong_method_type);
98 + __ jump_to_method_handle_entry(G3_method_handle, O1_scratch);
99 +
100 + return entry_point;
101 +}
102 +
103 +
104 +#ifdef ASSERT
105 +static void verify_argslot(MacroAssembler* _masm, Register argslot_reg, Register temp_reg, const char* error_message) {
106 + // Verify that argslot lies within (Gargs, FP].
107 + Label L_ok, L_bad;
108 +#ifdef _LP64
109 + __ add(FP, STACK_BIAS, temp_reg);
110 + __ cmp(argslot_reg, temp_reg);
111 +#else
112 + __ cmp(argslot_reg, FP);
113 +#endif
114 + __ brx(Assembler::greaterUnsigned, false, Assembler::pn, L_bad);
115 + __ delayed()->nop();
116 + __ cmp(Gargs, argslot_reg);
117 + __ brx(Assembler::lessEqualUnsigned, false, Assembler::pt, L_ok);
118 + __ delayed()->nop();
119 + __ bind(L_bad);
120 + __ stop(error_message);
121 + __ bind(L_ok);
122 +}
123 +#endif
124 +
125 +
126 +// Helper to insert argument slots into the stack.
127 +// arg_slots must be a multiple of stack_move_unit() and <= 0
128 +void MethodHandles::insert_arg_slots(MacroAssembler* _masm,
129 + RegisterOrConstant arg_slots,
130 + int arg_mask,
131 + Register argslot_reg,
132 + Register temp_reg, Register temp2_reg, Register temp3_reg) {
133 + assert(temp3_reg != noreg, "temp3 required");
134 + assert_different_registers(argslot_reg, temp_reg, temp2_reg, temp3_reg,
135 + (!arg_slots.is_register() ? Gargs : arg_slots.as_register()));
136 +
137 +#ifdef ASSERT
138 + verify_argslot(_masm, argslot_reg, temp_reg, "insertion point must fall within current frame");
139 + if (arg_slots.is_register()) {
140 + Label L_ok, L_bad;
141 + __ cmp(arg_slots.as_register(), (int32_t) NULL_WORD);
142 + __ br(Assembler::greater, false, Assembler::pn, L_bad);
143 + __ delayed()->nop();
144 + __ btst(-stack_move_unit() - 1, arg_slots.as_register());
145 + __ br(Assembler::zero, false, Assembler::pt, L_ok);
146 + __ delayed()->nop();
147 + __ bind(L_bad);
148 + __ stop("assert arg_slots <= 0 and clear low bits");
149 + __ bind(L_ok);
150 + } else {
151 + assert(arg_slots.as_constant() <= 0, "");
152 + assert(arg_slots.as_constant() % -stack_move_unit() == 0, "");
153 + }
154 +#endif // ASSERT
155 +
156 +#ifdef _LP64
157 + if (arg_slots.is_register()) {
158 + // Was arg_slots register loaded as signed int?
159 + Label L_ok;
160 + __ sll(arg_slots.as_register(), BitsPerInt, temp_reg);
161 + __ sra(temp_reg, BitsPerInt, temp_reg);
162 + __ cmp(arg_slots.as_register(), temp_reg);
163 + __ br(Assembler::equal, false, Assembler::pt, L_ok);
164 + __ delayed()->nop();
165 + __ stop("arg_slots register not loaded as signed int");
166 + __ bind(L_ok);
167 + }
168 +#endif
169 +
170 + // Make space on the stack for the inserted argument(s).
171 + // Then pull down everything shallower than argslot_reg.
172 + // The stacked return address gets pulled down with everything else.
173 + // That is, copy [sp, argslot) downward by -size words. In pseudo-code:
174 + // sp -= size;
175 + // for (temp = sp + size; temp < argslot; temp++)
176 + // temp[-size] = temp[0]
177 + // argslot -= size;
178 + RegisterOrConstant offset = temp3_reg;
179 + __ regcon_sll_ptr(arg_slots, LogBytesPerWord, offset);
180 +
181 + // Keep the stack pointer 2*wordSize aligned.
182 + const int TwoWordAlignmentMask = right_n_bits(LogBytesPerWord + 1);
183 + RegisterOrConstant masked_offset = temp_reg;
184 + __ regcon_andn_ptr(offset, TwoWordAlignmentMask, masked_offset);
185 + __ add(SP, masked_offset, SP);
186 +
187 + __ mov(Gargs, temp_reg); // source pointer for copy
188 + __ add(Gargs, offset, Gargs);
189 +
190 + {
191 + Label loop;
192 + __ bind(loop);
193 + // pull one word down each time through the loop
194 + __ ld_ptr(Address(temp_reg, 0), temp2_reg);
195 + __ st_ptr(temp2_reg, Address(temp_reg, offset));
196 + __ add(temp_reg, wordSize, temp_reg);
197 + __ cmp(temp_reg, argslot_reg);
198 + __ brx(Assembler::less, false, Assembler::pt, loop);
199 + __ delayed()->nop(); // FILLME
200 + }
201 +
202 + // Now move the argslot down, to point to the opened-up space.
203 + __ add(argslot_reg, offset, argslot_reg);
204 +}
205 +
206 +
207 +// Helper to remove argument slots from the stack.
208 +// arg_slots must be a multiple of stack_move_unit() and >= 0
209 +void MethodHandles::remove_arg_slots(MacroAssembler* _masm,
210 + RegisterOrConstant arg_slots,
211 + Register argslot_reg,
212 + Register temp_reg, Register temp2_reg, Register temp3_reg) {
213 + assert(temp3_reg != noreg, "temp3 required");
214 + assert_different_registers(argslot_reg, temp_reg, temp2_reg, temp3_reg,
215 + (!arg_slots.is_register() ? Gargs : arg_slots.as_register()));
216 +
217 + RegisterOrConstant offset = temp3_reg;
218 + __ regcon_sll_ptr(arg_slots, LogBytesPerWord, offset);
219 +
220 +#ifdef ASSERT
221 + // Verify that [argslot..argslot+size) lies within (Gargs, FP).
222 + __ add(argslot_reg, offset, temp2_reg);
223 + verify_argslot(_masm, temp2_reg, temp_reg, "deleted argument(s) must fall within current frame");
224 + if (arg_slots.is_register()) {
225 + Label L_ok, L_bad;
226 + __ cmp(arg_slots.as_register(), (int32_t) NULL_WORD);
227 + __ br(Assembler::less, false, Assembler::pn, L_bad);
228 + __ delayed()->nop();
229 + __ btst(-stack_move_unit() - 1, arg_slots.as_register());
230 + __ br(Assembler::zero, false, Assembler::pt, L_ok);
231 + __ delayed()->nop();
232 + __ bind(L_bad);
233 + __ stop("assert arg_slots >= 0 and clear low bits");
234 + __ bind(L_ok);
235 + } else {
236 + assert(arg_slots.as_constant() >= 0, "");
237 + assert(arg_slots.as_constant() % -stack_move_unit() == 0, "");
238 + }
239 +#endif // ASSERT
240 +
241 + // Pull up everything shallower than argslot.
242 + // Then remove the excess space on the stack.
243 + // The stacked return address gets pulled up with everything else.
244 + // That is, copy [sp, argslot) upward by size words. In pseudo-code:
245 + // for (temp = argslot-1; temp >= sp; --temp)
246 + // temp[size] = temp[0]
247 + // argslot += size;
248 + // sp += size;
249 + __ sub(argslot_reg, wordSize, temp_reg); // source pointer for copy
250 + {
251 + Label loop;
252 + __ bind(loop);
253 + // pull one word up each time through the loop
254 + __ ld_ptr(Address(temp_reg, 0), temp2_reg);
255 + __ st_ptr(temp2_reg, Address(temp_reg, offset));
256 + __ sub(temp_reg, wordSize, temp_reg);
257 + __ cmp(temp_reg, Gargs);
258 + __ brx(Assembler::greaterEqual, false, Assembler::pt, loop);
259 + __ delayed()->nop(); // FILLME
260 + }
261 +
262 + // Now move the argslot up, to point to the just-copied block.
263 + __ add(Gargs, offset, Gargs);
264 + // And adjust the argslot address to point at the deletion point.
265 + __ add(argslot_reg, offset, argslot_reg);
266 +
267 + // Keep the stack pointer 2*wordSize aligned.
268 + const int TwoWordAlignmentMask = right_n_bits(LogBytesPerWord + 1);
269 + RegisterOrConstant masked_offset = temp_reg;
270 + __ regcon_andn_ptr(offset, TwoWordAlignmentMask, masked_offset);
271 + __ add(SP, masked_offset, SP);
64 272 }
65 273
274 +
275 +#ifndef PRODUCT
276 +extern "C" void print_method_handle(oop mh);
277 +void trace_method_handle_stub(const char* adaptername,
278 + oop mh) {
279 +#if 0
280 + intptr_t* entry_sp,
281 + intptr_t* saved_sp,
282 + intptr_t* saved_bp) {
283 + // called as a leaf from native code: do not block the JVM!
284 + intptr_t* last_sp = (intptr_t*) saved_bp[frame::interpreter_frame_last_sp_offset];
285 + intptr_t* base_sp = (intptr_t*) saved_bp[frame::interpreter_frame_monitor_block_top_offset];
286 + printf("MH %s mh="INTPTR_FORMAT" sp=("INTPTR_FORMAT"+"INTX_FORMAT") stack_size="INTX_FORMAT" bp="INTPTR_FORMAT"\n",
287 + adaptername, (intptr_t)mh, (intptr_t)entry_sp, (intptr_t)(saved_sp - entry_sp), (intptr_t)(base_sp - last_sp), (intptr_t)saved_bp);
288 + if (last_sp != saved_sp)
289 + printf("*** last_sp="INTPTR_FORMAT"\n", (intptr_t)last_sp);
290 +#endif
291 +
292 + printf("MH %s mh="INTPTR_FORMAT"\n", adaptername, (intptr_t) mh);
293 + print_method_handle(mh);
294 +}
295 +#endif // PRODUCT
296 +
297 +
298 +//------------------------------------------------------------------------------
299 +// MethodHandles::generate_method_handle_stub
300 +//
66 301 // Generate an "entry" field for a method handle.
67 302 // This determines how the method handle will respond to calls.
68 303 void MethodHandles::generate_method_handle_stub(MacroAssembler* _masm, MethodHandles::EntryKind ek) {
69 - ShouldNotReachHere(); //NYI, 6815692
304 + // Here is the register state during an interpreted call,
305 + // as set up by generate_method_handle_interpreter_entry():
306 + // - G5: garbage temp (was MethodHandle.invoke methodOop, unused)
307 + // - G3: receiver method handle
308 + // - O5_savedSP: sender SP (must preserve)
309 +
310 + Register O0_argslot = O0;
311 + Register O1_scratch = O1;
312 + Register O2_scratch = O2;
313 + Register O3_scratch = O3;
314 + Register G5_index = G5;
315 +
316 + guarantee(java_dyn_MethodHandle::vmentry_offset_in_bytes() != 0, "must have offsets");
317 +
318 + // Some handy addresses:
319 + Address G5_method_fie( G5_method, in_bytes(methodOopDesc::from_interpreted_offset()));
320 +
321 + Address G3_mh_vmtarget( G3_method_handle, java_dyn_MethodHandle::vmtarget_offset_in_bytes());
322 +
323 + Address G3_dmh_vmindex( G3_method_handle, sun_dyn_DirectMethodHandle::vmindex_offset_in_bytes());
324 +
325 + Address G3_bmh_vmargslot( G3_method_handle, sun_dyn_BoundMethodHandle::vmargslot_offset_in_bytes());
326 + Address G3_bmh_argument( G3_method_handle, sun_dyn_BoundMethodHandle::argument_offset_in_bytes());
327 +
328 + Address G3_amh_vmargslot( G3_method_handle, sun_dyn_AdapterMethodHandle::vmargslot_offset_in_bytes());
329 + Address G3_amh_argument ( G3_method_handle, sun_dyn_AdapterMethodHandle::argument_offset_in_bytes());
330 + Address G3_amh_conversion(G3_method_handle, sun_dyn_AdapterMethodHandle::conversion_offset_in_bytes());
331 +
332 + const int java_mirror_offset = klassOopDesc::klass_part_offset_in_bytes() + Klass::java_mirror_offset_in_bytes();
333 +
334 + if (have_entry(ek)) {
335 + __ nop(); // empty stubs make SG sick
336 + return;
337 + }
338 +
339 + address interp_entry = __ pc();
340 + if (UseCompressedOops) __ unimplemented("UseCompressedOops");
341 +
342 +#ifndef PRODUCT
343 + if (TraceMethodHandles) {
344 + // save: Gargs, O5_savedSP
345 + __ save(SP, -16*wordSize, SP);
346 + __ set((intptr_t) entry_name(ek), O0);
347 + __ mov(G3_method_handle, O1);
348 + __ call_VM_leaf(Lscratch, CAST_FROM_FN_PTR(address, trace_method_handle_stub));
349 + __ restore(SP, 16*wordSize, SP);
350 + }
351 +#endif // PRODUCT
352 +
353 + switch ((int) ek) {
354 + case _raise_exception:
355 + {
356 + // Not a real MH entry, but rather shared code for raising an
357 + // exception. Extra local arguments are passed in scratch
358 + // registers, as required type in O3, failing object (or NULL)
359 + // in O2, failing bytecode type in O1.
360 +
361 + __ mov(O5_savedSP, SP); // Cut the stack back to where the caller started.
362 +
363 + // Push arguments as if coming from the interpreter.
364 + Register O0_scratch = O0_argslot;
365 + int stackElementSize = Interpreter::stackElementSize();
366 +
367 + // Make space on the stack for the arguments.
368 + __ sub(SP, 4*stackElementSize, SP);
369 + __ sub(Gargs, 3*stackElementSize, Gargs);
370 + //__ sub(Lesp, 3*stackElementSize, Lesp);
371 +
372 + // void raiseException(int code, Object actual, Object required)
373 + __ st( O1_scratch, Address(Gargs, 2*stackElementSize)); // code
374 + __ st_ptr(O2_scratch, Address(Gargs, 1*stackElementSize)); // actual
375 + __ st_ptr(O3_scratch, Address(Gargs, 0*stackElementSize)); // required
376 +
377 + Label no_method;
378 + // FIXME: fill in _raise_exception_method with a suitable sun.dyn method
379 + __ set(AddressLiteral((address) &_raise_exception_method), G5_method);
380 + __ ld_ptr(Address(G5_method, 0), G5_method);
381 + __ tst(G5_method);
382 + __ brx(Assembler::zero, false, Assembler::pn, no_method);
383 + __ delayed()->nop();
384 +
385 + int jobject_oop_offset = 0;
386 + __ ld_ptr(Address(G5_method, jobject_oop_offset), G5_method);
387 + __ tst(G5_method);
388 + __ brx(Assembler::zero, false, Assembler::pn, no_method);
389 + __ delayed()->nop();
390 +
391 + __ verify_oop(G5_method);
392 + __ jump_indirect_to(G5_method_fie, O1_scratch);
393 + __ delayed()->nop();
394 +
395 + // If we get here, the Java runtime did not do its job of creating the exception.
396 + // Do something that is at least causes a valid throw from the interpreter.
397 + __ bind(no_method);
398 + __ unimplemented("_raise_exception no method");
399 + }
400 + break;
401 +
402 + case _invokestatic_mh:
403 + case _invokespecial_mh:
404 + {
405 + __ ld_ptr(G3_mh_vmtarget, G5_method); // target is a methodOop
406 + __ verify_oop(G5_method);
407 + // Same as TemplateTable::invokestatic or invokespecial,
408 + // minus the CP setup and profiling:
409 + if (ek == _invokespecial_mh) {
410 + // Must load & check the first argument before entering the target method.
411 + __ load_method_handle_vmslots(O0_argslot, G3_method_handle, O1_scratch);
412 + __ ld_ptr(__ argument_address(O0_argslot), G3_method_handle);
413 + __ null_check(G3_method_handle);
414 + __ verify_oop(G3_method_handle);
415 + }
416 + __ jump_indirect_to(G5_method_fie, O1_scratch);
417 + __ delayed()->nop();
418 + }
419 + break;
420 +
421 + case _invokevirtual_mh:
422 + {
423 + // Same as TemplateTable::invokevirtual,
424 + // minus the CP setup and profiling:
425 +
426 + // Pick out the vtable index and receiver offset from the MH,
427 + // and then we can discard it:
428 + __ load_method_handle_vmslots(O0_argslot, G3_method_handle, O1_scratch);
429 + __ ldsw(G3_dmh_vmindex, G5_index);
430 + // Note: The verifier allows us to ignore G3_mh_vmtarget.
431 + __ ld_ptr(__ argument_address(O0_argslot, -1), G3_method_handle);
432 + __ null_check(G3_method_handle, oopDesc::klass_offset_in_bytes());
433 +
434 + // Get receiver klass:
435 + Register O0_klass = O0_argslot;
436 + __ load_klass(G3_method_handle, O0_klass);
437 + __ verify_oop(O0_klass);
438 +
439 + // Get target methodOop & entry point:
440 + const int base = instanceKlass::vtable_start_offset() * wordSize;
441 + assert(vtableEntry::size() * wordSize == wordSize, "adjust the scaling in the code below");
442 +
443 + __ sll_ptr(G5_index, LogBytesPerWord, G5_index);
444 + __ add(O0_klass, G5_index, O0_klass);
445 + Address vtable_entry_addr(O0_klass, base + vtableEntry::method_offset_in_bytes());
446 + __ ld_ptr(vtable_entry_addr, G5_method);
447 +
448 + __ verify_oop(G5_method);
449 + __ jump_indirect_to(G5_method_fie, O1_scratch);
450 + __ delayed()->nop();
451 + }
452 + break;
453 +
454 + case _invokeinterface_mh:
455 + {
456 + // Same as TemplateTable::invokeinterface,
457 + // minus the CP setup and profiling:
458 + __ load_method_handle_vmslots(O0_argslot, G3_method_handle, O1_scratch);
459 + Register O1_intf = O1_scratch;
460 + __ ld_ptr(G3_mh_vmtarget, O1_intf);
461 + __ ldsw(G3_dmh_vmindex, G5_index);
462 + __ ld_ptr(__ argument_address(O0_argslot, -1), G3_method_handle);
463 + __ null_check(G3_method_handle, oopDesc::klass_offset_in_bytes());
464 +
465 + // Get receiver klass:
466 + Register O0_klass = O0_argslot;
467 + __ load_klass(G3_method_handle, O0_klass);
468 + __ verify_oop(O0_klass);
469 +
470 + // Get interface:
471 + Label no_such_interface;
472 + __ verify_oop(O1_intf);
473 + __ lookup_interface_method(O0_klass, O1_intf,
474 + // Note: next two args must be the same:
475 + G5_index, G5_method,
476 + O2_scratch,
477 + O3_scratch,
478 + no_such_interface);
479 +
480 + __ verify_oop(G5_method);
481 + __ jump_indirect_to(G5_method_fie, O1_scratch);
482 + __ delayed()->nop();
483 +
484 + __ bind(no_such_interface);
485 + // Throw an exception.
486 + // For historical reasons, it will be IncompatibleClassChangeError.
487 + __ unimplemented("not tested yet");
488 + __ ld_ptr(Address(O1_intf, java_mirror_offset), O3_scratch); // required interface
489 + __ mov(O0_klass, O2_scratch); // bad receiver
490 + __ jump_to(AddressLiteral(from_interpreted_entry(_raise_exception)), O0_argslot);
491 + __ delayed()->mov(Bytecodes::_invokeinterface, O1_scratch); // who is complaining?
492 + }
493 + break;
494 +
495 + case _bound_ref_mh:
496 + case _bound_int_mh:
497 + case _bound_long_mh:
498 + case _bound_ref_direct_mh:
499 + case _bound_int_direct_mh:
500 + case _bound_long_direct_mh:
501 + {
502 + const bool direct_to_method = (ek >= _bound_ref_direct_mh);
503 + BasicType arg_type = T_ILLEGAL;
504 + int arg_mask = _INSERT_NO_MASK;
505 + int arg_slots = -1;
506 + get_ek_bound_mh_info(ek, arg_type, arg_mask, arg_slots);
507 +
508 + // Make room for the new argument:
509 + __ ldsw(G3_bmh_vmargslot, O0_argslot);
510 + __ add(Gargs, __ argument_offset(O0_argslot), O0_argslot);
511 +
512 + insert_arg_slots(_masm, arg_slots * stack_move_unit(), arg_mask, O0_argslot, O1_scratch, O2_scratch, G5_index);
513 +
514 + // Store bound argument into the new stack slot:
515 + __ ld_ptr(G3_bmh_argument, O1_scratch);
516 + if (arg_type == T_OBJECT) {
517 + __ st_ptr(O1_scratch, Address(O0_argslot, 0));
518 + } else {
519 + Address prim_value_addr(O1_scratch, java_lang_boxing_object::value_offset_in_bytes(arg_type));
520 + __ load_sized_value(prim_value_addr, O2_scratch, type2aelembytes(arg_type), is_signed_subword_type(arg_type));
521 + if (arg_slots == 2) {
522 + __ unimplemented("not yet tested");
523 +#ifndef _LP64
524 + __ signx(O2_scratch, O3_scratch); // Sign extend
525 +#endif
526 + __ st_long(O2_scratch, Address(O0_argslot, 0)); // Uses O2/O3 on !_LP64
527 + } else {
528 + __ st_ptr( O2_scratch, Address(O0_argslot, 0));
529 + }
530 + }
531 +
532 + if (direct_to_method) {
533 + __ ld_ptr(G3_mh_vmtarget, G5_method); // target is a methodOop
534 + __ verify_oop(G5_method);
535 + __ jump_indirect_to(G5_method_fie, O1_scratch);
536 + __ delayed()->nop();
537 + } else {
538 + __ ld_ptr(G3_mh_vmtarget, G3_method_handle); // target is a methodOop
539 + __ verify_oop(G3_method_handle);
540 + __ jump_to_method_handle_entry(G3_method_handle, O1_scratch);
541 + }
542 + }
543 + break;
544 +
545 + case _adapter_retype_only:
546 + case _adapter_retype_raw:
547 + // Immediately jump to the next MH layer:
548 + __ ld_ptr(G3_mh_vmtarget, G3_method_handle);
549 + __ jump_to_method_handle_entry(G3_method_handle, O1_scratch);
550 + // This is OK when all parameter types widen.
551 + // It is also OK when a return type narrows.
552 + break;
553 +
554 + case _adapter_check_cast:
555 + {
556 + // Temps:
557 + Register G5_klass = G5_index; // Interesting AMH data.
558 +
559 + // Check a reference argument before jumping to the next layer of MH:
560 + __ ldsw(G3_amh_vmargslot, O0_argslot);
561 + Address vmarg = __ argument_address(O0_argslot);
562 +
563 + // What class are we casting to?
564 + __ ld_ptr(G3_amh_argument, G5_klass); // This is a Class object!
565 + __ ld_ptr(Address(G5_klass, java_lang_Class::klass_offset_in_bytes()), G5_klass);
566 +
567 + Label done;
568 + __ ld_ptr(vmarg, O1_scratch);
569 + __ tst(O1_scratch);
570 + __ brx(Assembler::zero, false, Assembler::pn, done); // No cast if null.
571 + __ delayed()->nop();
572 + __ load_klass(O1_scratch, O1_scratch);
573 +
574 + // Live at this point:
575 + // - G5_klass : klass required by the target method
576 + // - O1_scratch : argument klass to test
577 + // - G3_method_handle: adapter method handle
578 + __ check_klass_subtype(O1_scratch, G5_klass, O0_argslot, O2_scratch, done);
579 +
580 + // If we get here, the type check failed!
581 + __ ldsw(G3_amh_vmargslot, O0_argslot); // reload argslot field
582 + __ ld_ptr(G3_amh_argument, O3_scratch); // required class
583 + __ ld_ptr(vmarg, O2_scratch); // bad object
584 + __ jump_to(AddressLiteral(from_interpreted_entry(_raise_exception)), O0_argslot);
585 + __ delayed()->mov(Bytecodes::_checkcast, O1_scratch); // who is complaining?
586 +
587 + __ bind(done);
588 + // Get the new MH:
589 + __ ld_ptr(G3_mh_vmtarget, G3_method_handle);
590 + __ jump_to_method_handle_entry(G3_method_handle, O1_scratch);
591 + }
592 + break;
593 +
594 + case _adapter_prim_to_prim:
595 + case _adapter_ref_to_prim:
596 + // Handled completely by optimized cases.
597 + __ stop("init_AdapterMethodHandle should not issue this");
598 + break;
599 +
600 + case _adapter_opt_i2i: // optimized subcase of adapt_prim_to_prim
601 +//case _adapter_opt_f2i: // optimized subcase of adapt_prim_to_prim
602 + case _adapter_opt_l2i: // optimized subcase of adapt_prim_to_prim
603 + case _adapter_opt_unboxi: // optimized subcase of adapt_ref_to_prim
604 + {
605 + // Perform an in-place conversion to int or an int subword.
606 + __ ldsw(G3_amh_vmargslot, O0_argslot);
607 + Address vmarg = __ argument_address(O0_argslot);
608 + Address value;
609 + bool value_left_justified = false;
610 +
611 + switch (ek) {
612 + case _adapter_opt_i2i:
613 + case _adapter_opt_l2i:
614 + __ unimplemented(entry_name(ek));
615 + value = vmarg;
616 + break;
617 + case _adapter_opt_unboxi:
618 + {
619 + // Load the value up from the heap.
620 + __ ld_ptr(vmarg, O1_scratch);
621 + int value_offset = java_lang_boxing_object::value_offset_in_bytes(T_INT);
622 +#ifdef ASSERT
623 + for (int bt = T_BOOLEAN; bt < T_INT; bt++) {
624 + if (is_subword_type(BasicType(bt)))
625 + assert(value_offset == java_lang_boxing_object::value_offset_in_bytes(BasicType(bt)), "");
626 + }
627 +#endif
628 + __ null_check(O1_scratch, value_offset);
629 + value = Address(O1_scratch, value_offset);
630 +#ifdef _BIG_ENDIAN
631 + // Values stored in objects are packed.
632 + value_left_justified = true;
633 +#endif
634 + }
635 + break;
636 + default:
637 + ShouldNotReachHere();
638 + }
639 +
640 + // This check is required on _BIG_ENDIAN
641 + Register G5_vminfo = G5_index;
642 + __ ldsw(G3_amh_conversion, G5_vminfo);
643 + assert(CONV_VMINFO_SHIFT == 0, "preshifted");
644 +
645 + // Original 32-bit vmdata word must be of this form:
646 + // | MBZ:6 | signBitCount:8 | srcDstTypes:8 | conversionOp:8 |
647 + __ lduw(value, O1_scratch);
648 + if (!value_left_justified)
649 + __ sll(O1_scratch, G5_vminfo, O1_scratch);
650 + Label zero_extend, done;
651 + __ btst(CONV_VMINFO_SIGN_FLAG, G5_vminfo);
652 + __ br(Assembler::zero, false, Assembler::pn, zero_extend);
653 + __ delayed()->nop();
654 +
655 + // this path is taken for int->byte, int->short
656 + __ sra(O1_scratch, G5_vminfo, O1_scratch);
657 + __ ba(false, done);
658 + __ delayed()->nop();
659 +
660 + __ bind(zero_extend);
661 + // this is taken for int->char
662 + __ srl(O1_scratch, G5_vminfo, O1_scratch);
663 +
664 + __ bind(done);
665 + __ st(O1_scratch, vmarg);
666 +
667 + // Get the new MH:
668 + __ ld_ptr(G3_mh_vmtarget, G3_method_handle);
669 + __ jump_to_method_handle_entry(G3_method_handle, O1_scratch);
670 + }
671 + break;
672 +
673 + case _adapter_opt_i2l: // optimized subcase of adapt_prim_to_prim
674 + case _adapter_opt_unboxl: // optimized subcase of adapt_ref_to_prim
675 + {
676 + // Perform an in-place int-to-long or ref-to-long conversion.
677 + __ ldsw(G3_amh_vmargslot, O0_argslot);
678 +
679 + // On big-endian machine we duplicate the slot and store the MSW
680 + // in the first slot.
681 + __ add(Gargs, __ argument_offset(O0_argslot, 1), O0_argslot);
682 +
683 + insert_arg_slots(_masm, stack_move_unit(), _INSERT_INT_MASK, O0_argslot, O1_scratch, O2_scratch, G5_index);
684 +
685 + Address arg_lsw(O0_argslot, 0);
686 + Address arg_msw(O0_argslot, -Interpreter::stackElementSize());
687 +
688 + switch (ek) {
689 + case _adapter_opt_i2l:
690 + {
691 + __ ldsw(arg_lsw, O2_scratch); // Load LSW
692 +#ifndef _LP64
693 + __ signx(O2_scratch, O3_scratch); // Sign extend
694 +#endif
695 + __ st_long(O2_scratch, arg_msw); // Uses O2/O3 on !_LP64
696 + }
697 + break;
698 + case _adapter_opt_unboxl:
699 + {
700 + // Load the value up from the heap.
701 + __ ld_ptr(arg_lsw, O1_scratch);
702 + int value_offset = java_lang_boxing_object::value_offset_in_bytes(T_LONG);
703 + assert(value_offset == java_lang_boxing_object::value_offset_in_bytes(T_DOUBLE), "");
704 + __ null_check(O1_scratch, value_offset);
705 + __ ld_long(Address(O1_scratch, value_offset), O2_scratch); // Uses O2/O3 on !_LP64
706 + __ st_long(O2_scratch, arg_msw);
707 + }
708 + break;
709 + default:
710 + ShouldNotReachHere();
711 + }
712 +
713 + __ ld_ptr(G3_mh_vmtarget, G3_method_handle);
714 + __ jump_to_method_handle_entry(G3_method_handle, O1_scratch);
715 + }
716 + break;
717 +
718 + case _adapter_opt_f2d: // optimized subcase of adapt_prim_to_prim
719 + case _adapter_opt_d2f: // optimized subcase of adapt_prim_to_prim
720 + {
721 + // perform an in-place floating primitive conversion
722 + __ unimplemented(entry_name(ek));
723 + }
724 + break;
725 +
726 + case _adapter_prim_to_ref:
727 + __ unimplemented(entry_name(ek)); // %%% FIXME: NYI
728 + break;
729 +
730 + case _adapter_swap_args:
731 + case _adapter_rot_args:
732 + // handled completely by optimized cases
733 + __ stop("init_AdapterMethodHandle should not issue this");
734 + break;
735 +
736 + case _adapter_opt_swap_1:
737 + case _adapter_opt_swap_2:
738 + case _adapter_opt_rot_1_up:
739 + case _adapter_opt_rot_1_down:
740 + case _adapter_opt_rot_2_up:
741 + case _adapter_opt_rot_2_down:
742 + {
743 + int swap_bytes = 0, rotate = 0;
744 + get_ek_adapter_opt_swap_rot_info(ek, swap_bytes, rotate);
745 +
746 + // 'argslot' is the position of the first argument to swap.
747 + __ ldsw(G3_amh_vmargslot, O0_argslot);
748 + __ add(Gargs, __ argument_offset(O0_argslot), O0_argslot);
749 +
750 + // 'vminfo' is the second.
751 + Register O1_destslot = O1_scratch;
752 + __ ldsw(G3_amh_conversion, O1_destslot);
753 + assert(CONV_VMINFO_SHIFT == 0, "preshifted");
754 + __ and3(O1_destslot, CONV_VMINFO_MASK, O1_destslot);
755 + __ add(Gargs, __ argument_offset(O1_destslot), O1_destslot);
756 +
757 + if (!rotate) {
758 + for (int i = 0; i < swap_bytes; i += wordSize) {
759 + __ ld_ptr(Address(O0_argslot, i), O2_scratch);
760 + __ ld_ptr(Address(O1_destslot, i), O3_scratch);
761 + __ st_ptr(O3_scratch, Address(O0_argslot, i));
762 + __ st_ptr(O2_scratch, Address(O1_destslot, i));
763 + }
764 + } else {
765 + // Save the first chunk, which is going to get overwritten.
766 + switch (swap_bytes) {
767 + case 4 : __ lduw(Address(O0_argslot, 0), O2_scratch); break;
768 + case 16: __ ldx( Address(O0_argslot, 8), O3_scratch); //fall-thru
769 + case 8 : __ ldx( Address(O0_argslot, 0), O2_scratch); break;
770 + default: ShouldNotReachHere();
771 + }
772 +
773 + if (rotate > 0) {
774 + // Rorate upward.
775 + __ sub(O0_argslot, swap_bytes, O0_argslot);
776 +#if ASSERT
777 + {
778 + // Verify that argslot > destslot, by at least swap_bytes.
779 + Label L_ok;
780 + __ cmp(O0_argslot, O1_destslot);
781 + __ brx(Assembler::greaterEqualUnsigned, false, Assembler::pt, L_ok);
782 + __ delayed()->nop();
783 + __ stop("source must be above destination (upward rotation)");
784 + __ bind(L_ok);
785 + }
786 +#endif
787 + // Work argslot down to destslot, copying contiguous data upwards.
788 + // Pseudo-code:
789 + // argslot = src_addr - swap_bytes
790 + // destslot = dest_addr
791 + // while (argslot >= destslot) {
792 + // *(argslot + swap_bytes) = *(argslot + 0);
793 + // argslot--;
794 + // }
795 + Label loop;
796 + __ bind(loop);
797 + __ ld_ptr(Address(O0_argslot, 0), G5_index);
798 + __ st_ptr(G5_index, Address(O0_argslot, swap_bytes));
799 + __ sub(O0_argslot, wordSize, O0_argslot);
800 + __ cmp(O0_argslot, O1_destslot);
801 + __ brx(Assembler::greaterEqualUnsigned, false, Assembler::pt, loop);
802 + __ delayed()->nop(); // FILLME
803 + } else {
804 + __ add(O0_argslot, swap_bytes, O0_argslot);
805 +#if ASSERT
806 + {
807 + // Verify that argslot < destslot, by at least swap_bytes.
808 + Label L_ok;
809 + __ cmp(O0_argslot, O1_destslot);
810 + __ brx(Assembler::lessEqualUnsigned, false, Assembler::pt, L_ok);
811 + __ delayed()->nop();
812 + __ stop("source must be above destination (upward rotation)");
813 + __ bind(L_ok);
814 + }
815 +#endif
816 + // Work argslot up to destslot, copying contiguous data downwards.
817 + // Pseudo-code:
818 + // argslot = src_addr + swap_bytes
819 + // destslot = dest_addr
820 + // while (argslot >= destslot) {
821 + // *(argslot - swap_bytes) = *(argslot + 0);
822 + // argslot++;
823 + // }
824 + Label loop;
825 + __ bind(loop);
826 + __ ld_ptr(Address(O0_argslot, 0), G5_index);
827 + __ st_ptr(G5_index, Address(O0_argslot, -swap_bytes));
828 + __ add(O0_argslot, wordSize, O0_argslot);
829 + __ cmp(O0_argslot, O1_destslot);
830 + __ brx(Assembler::lessEqualUnsigned, false, Assembler::pt, loop);
831 + __ delayed()->nop(); // FILLME
832 + }
833 +
834 + // Store the original first chunk into the destination slot, now free.
835 + switch (swap_bytes) {
836 + case 4 : __ stw(O2_scratch, Address(O1_destslot, 0)); break;
837 + case 16: __ stx(O3_scratch, Address(O1_destslot, 8)); // fall-thru
838 + case 8 : __ stx(O2_scratch, Address(O1_destslot, 0)); break;
839 + default: ShouldNotReachHere();
840 + }
841 + }
842 +
843 + __ ld_ptr(G3_mh_vmtarget, G3_method_handle);
844 + __ jump_to_method_handle_entry(G3_method_handle, O1_scratch);
845 + }
846 + break;
847 +
848 + case _adapter_dup_args:
849 + {
850 + // 'argslot' is the position of the first argument to duplicate.
851 + __ ldsw(G3_amh_vmargslot, O0_argslot);
852 + __ add(Gargs, __ argument_offset(O0_argslot), O0_argslot);
853 +
854 + // 'stack_move' is negative number of words to duplicate.
855 + Register G5_stack_move = G5_index;
856 + __ ldsw(G3_amh_conversion, G5_stack_move);
857 + __ sra(G5_stack_move, CONV_STACK_MOVE_SHIFT, G5_stack_move);
858 +
859 + // Remember the old Gargs (argslot[0]).
860 + Register O1_oldarg = O1_scratch;
861 + __ mov(Gargs, O1_oldarg);
862 +
863 + // Move Gargs down to make room for dups.
864 + __ sll_ptr(G5_stack_move, LogBytesPerWord, G5_stack_move);
865 + __ add(Gargs, G5_stack_move, Gargs);
866 +
867 + // Compute the new Gargs (argslot[0]).
868 + Register O2_newarg = O2_scratch;
869 + __ mov(Gargs, O2_newarg);
870 +
871 + // Copy from oldarg[0...] down to newarg[0...]
872 + // Pseude-code:
873 + // O1_oldarg = old-Gargs
874 + // O2_newarg = new-Gargs
875 + // O0_argslot = argslot
876 + // while (O2_newarg < O1_oldarg) *O2_newarg = *O0_argslot++
877 + Label loop;
878 + __ bind(loop);
879 + __ ld_ptr(Address(O0_argslot, 0), O3_scratch);
880 + __ st_ptr(O3_scratch, Address(O2_newarg, 0));
881 + __ add(O0_argslot, wordSize, O0_argslot);
882 + __ add(O2_newarg, wordSize, O2_newarg);
883 + __ cmp(O2_newarg, O1_oldarg);
884 + __ brx(Assembler::less, false, Assembler::pt, loop);
885 + __ delayed()->nop(); // FILLME
886 +
887 + __ ld_ptr(G3_mh_vmtarget, G3_method_handle);
888 + __ jump_to_method_handle_entry(G3_method_handle, O1_scratch);
889 + }
890 + break;
891 +
892 + case _adapter_drop_args:
893 + {
894 + // 'argslot' is the position of the first argument to nuke.
895 + __ ldsw(G3_amh_vmargslot, O0_argslot);
896 + __ add(Gargs, __ argument_offset(O0_argslot), O0_argslot);
897 +
898 + // 'stack_move' is number of words to drop.
899 + Register G5_stack_move = G5_index;
900 + __ ldsw(G3_amh_conversion, G5_stack_move);
901 + __ sra(G5_stack_move, CONV_STACK_MOVE_SHIFT, G5_stack_move);
902 +
903 + remove_arg_slots(_masm, G5_stack_move, O0_argslot, O1_scratch, O2_scratch, O3_scratch);
904 +
905 + __ ld_ptr(G3_mh_vmtarget, G3_method_handle);
906 + __ jump_to_method_handle_entry(G3_method_handle, O1_scratch);
907 + }
908 + break;
909 +
910 + case _adapter_collect_args:
911 + __ unimplemented(entry_name(ek)); // %%% FIXME: NYI
912 + break;
913 +
914 + case _adapter_spread_args:
915 + // Handled completely by optimized cases.
916 + __ stop("init_AdapterMethodHandle should not issue this");
917 + break;
918 +
919 + case _adapter_opt_spread_0:
920 + case _adapter_opt_spread_1:
921 + case _adapter_opt_spread_more:
922 + {
923 + // spread an array out into a group of arguments
924 + __ unimplemented(entry_name(ek));
925 + }
926 + break;
927 +
928 + case _adapter_flyby:
929 + case _adapter_ricochet:
930 + __ unimplemented(entry_name(ek)); // %%% FIXME: NYI
931 + break;
932 +
933 + default:
934 + ShouldNotReachHere();
935 + }
936 +
937 + address me_cookie = MethodHandleEntry::start_compiled_entry(_masm, interp_entry);
938 + __ unimplemented(entry_name(ek)); // %%% FIXME: NYI
939 +
940 + init_entry(ek, MethodHandleEntry::finish_compiled_entry(_masm, me_cookie));
70 941 }
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX