/* * Copyright 1997-2009 Sun Microsystems, Inc. All Rights Reserved. * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. * * This code is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License version 2 only, as * published by the Free Software Foundation. * * This code is distributed in the hope that it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License * version 2 for more details (a copy is included in the LICENSE file that * accompanied this code). * * You should have received a copy of the GNU General Public License version * 2 along with this work; if not, write to the Free Software Foundation, * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. * * Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, * CA 95054 USA or visit www.sun.com if you need additional information or * have any questions. * */ #include "incls/_precompiled.incl" #include "incls/_assembler_sparc.cpp.incl" // Convert the raw encoding form into the form expected by the // constructor for Address. Address Address::make_raw(int base, int index, int scale, int disp, bool disp_is_oop) { assert(scale == 0, "not supported"); RelocationHolder rspec; if (disp_is_oop) { rspec = Relocation::spec_simple(relocInfo::oop_type); } Register rindex = as_Register(index); if (rindex != G0) { Address madr(as_Register(base), rindex); madr._rspec = rspec; return madr; } else { Address madr(as_Register(base), disp); madr._rspec = rspec; return madr; } } Address Argument::address_in_frame() const { // Warning: In LP64 mode disp will occupy more than 10 bits, but // op codes such as ld or ldx, only access disp() to get // their simm13 argument. int disp = ((_number - Argument::n_register_parameters + frame::memory_parameter_word_sp_offset) * BytesPerWord) + STACK_BIAS; if (is_in()) return Address(FP, disp); // In argument. else return Address(SP, disp); // Out argument. } static const char* argumentNames[][2] = { {"A0","P0"}, {"A1","P1"}, {"A2","P2"}, {"A3","P3"}, {"A4","P4"}, {"A5","P5"}, {"A6","P6"}, {"A7","P7"}, {"A8","P8"}, {"A9","P9"}, {"A(n>9)","P(n>9)"} }; const char* Argument::name() const { int nofArgs = sizeof argumentNames / sizeof argumentNames[0]; int num = number(); if (num >= nofArgs) num = nofArgs - 1; return argumentNames[num][is_in() ? 1 : 0]; } void Assembler::print_instruction(int inst) { const char* s; switch (inv_op(inst)) { default: s = "????"; break; case call_op: s = "call"; break; case branch_op: switch (inv_op2(inst)) { case bpr_op2: s = "bpr"; break; case fb_op2: s = "fb"; break; case fbp_op2: s = "fbp"; break; case br_op2: s = "br"; break; case bp_op2: s = "bp"; break; case cb_op2: s = "cb"; break; default: s = "????"; break; } } ::tty->print("%s", s); } // Patch instruction inst at offset inst_pos to refer to dest_pos // and return the resulting instruction. // We should have pcs, not offsets, but since all is relative, it will work out // OK. int Assembler::patched_branch(int dest_pos, int inst, int inst_pos) { int m; // mask for displacement field int v; // new value for displacement field const int word_aligned_ones = -4; switch (inv_op(inst)) { default: ShouldNotReachHere(); case call_op: m = wdisp(word_aligned_ones, 0, 30); v = wdisp(dest_pos, inst_pos, 30); break; case branch_op: switch (inv_op2(inst)) { case bpr_op2: m = wdisp16(word_aligned_ones, 0); v = wdisp16(dest_pos, inst_pos); break; case fbp_op2: m = wdisp( word_aligned_ones, 0, 19); v = wdisp( dest_pos, inst_pos, 19); break; case bp_op2: m = wdisp( word_aligned_ones, 0, 19); v = wdisp( dest_pos, inst_pos, 19); break; case fb_op2: m = wdisp( word_aligned_ones, 0, 22); v = wdisp( dest_pos, inst_pos, 22); break; case br_op2: m = wdisp( word_aligned_ones, 0, 22); v = wdisp( dest_pos, inst_pos, 22); break; case cb_op2: m = wdisp( word_aligned_ones, 0, 22); v = wdisp( dest_pos, inst_pos, 22); break; default: ShouldNotReachHere(); } } return inst & ~m | v; } // Return the offset of the branch destionation of instruction inst // at offset pos. // Should have pcs, but since all is relative, it works out. int Assembler::branch_destination(int inst, int pos) { int r; switch (inv_op(inst)) { default: ShouldNotReachHere(); case call_op: r = inv_wdisp(inst, pos, 30); break; case branch_op: switch (inv_op2(inst)) { case bpr_op2: r = inv_wdisp16(inst, pos); break; case fbp_op2: r = inv_wdisp( inst, pos, 19); break; case bp_op2: r = inv_wdisp( inst, pos, 19); break; case fb_op2: r = inv_wdisp( inst, pos, 22); break; case br_op2: r = inv_wdisp( inst, pos, 22); break; case cb_op2: r = inv_wdisp( inst, pos, 22); break; default: ShouldNotReachHere(); } } return r; } int AbstractAssembler::code_fill_byte() { return 0x00; // illegal instruction 0x00000000 } Assembler::Condition Assembler::reg_cond_to_cc_cond(Assembler::RCondition in) { switch (in) { case rc_z: return equal; case rc_lez: return lessEqual; case rc_lz: return less; case rc_nz: return notEqual; case rc_gz: return greater; case rc_gez: return greaterEqual; default: ShouldNotReachHere(); } return equal; } // Generate a bunch 'o stuff (including v9's #ifndef PRODUCT void Assembler::test_v9() { add( G0, G1, G2 ); add( G3, 0, G4 ); addcc( G5, G6, G7 ); addcc( I0, 1, I1 ); addc( I2, I3, I4 ); addc( I5, -1, I6 ); addccc( I7, L0, L1 ); addccc( L2, (1 << 12) - 2, L3 ); Label lbl1, lbl2, lbl3; bind(lbl1); bpr( rc_z, true, pn, L4, pc(), relocInfo::oop_type ); delayed()->nop(); bpr( rc_lez, false, pt, L5, lbl1); delayed()->nop(); fb( f_never, true, pc() + 4, relocInfo::none); delayed()->nop(); fb( f_notEqual, false, lbl2 ); delayed()->nop(); fbp( f_notZero, true, fcc0, pn, pc() - 4, relocInfo::none); delayed()->nop(); fbp( f_lessOrGreater, false, fcc1, pt, lbl3 ); delayed()->nop(); br( equal, true, pc() + 1024, relocInfo::none); delayed()->nop(); br( lessEqual, false, lbl1 ); delayed()->nop(); br( never, false, lbl1 ); delayed()->nop(); bp( less, true, icc, pn, pc(), relocInfo::none); delayed()->nop(); bp( lessEqualUnsigned, false, xcc, pt, lbl2 ); delayed()->nop(); call( pc(), relocInfo::none); delayed()->nop(); call( lbl3 ); delayed()->nop(); casa( L6, L7, O0 ); casxa( O1, O2, O3, 0 ); udiv( O4, O5, O7 ); udiv( G0, (1 << 12) - 1, G1 ); sdiv( G1, G2, G3 ); sdiv( G4, -((1 << 12) - 1), G5 ); udivcc( G6, G7, I0 ); udivcc( I1, -((1 << 12) - 2), I2 ); sdivcc( I3, I4, I5 ); sdivcc( I6, -((1 << 12) - 0), I7 ); done(); retry(); fadd( FloatRegisterImpl::S, F0, F1, F2 ); fsub( FloatRegisterImpl::D, F34, F0, F62 ); fcmp( FloatRegisterImpl::Q, fcc0, F0, F60); fcmpe( FloatRegisterImpl::S, fcc1, F31, F30); ftox( FloatRegisterImpl::D, F2, F4 ); ftoi( FloatRegisterImpl::Q, F4, F8 ); ftof( FloatRegisterImpl::S, FloatRegisterImpl::Q, F3, F12 ); fxtof( FloatRegisterImpl::S, F4, F5 ); fitof( FloatRegisterImpl::D, F6, F8 ); fmov( FloatRegisterImpl::Q, F16, F20 ); fneg( FloatRegisterImpl::S, F6, F7 ); fabs( FloatRegisterImpl::D, F10, F12 ); fmul( FloatRegisterImpl::Q, F24, F28, F32 ); fmul( FloatRegisterImpl::S, FloatRegisterImpl::D, F8, F9, F14 ); fdiv( FloatRegisterImpl::S, F10, F11, F12 ); fsqrt( FloatRegisterImpl::S, F13, F14 ); flush( L0, L1 ); flush( L2, -1 ); flushw(); illtrap( (1 << 22) - 2); impdep1( 17, (1 << 19) - 1 ); impdep2( 3, 0 ); jmpl( L3, L4, L5 ); delayed()->nop(); jmpl( L6, -1, L7, Relocation::spec_simple(relocInfo::none)); delayed()->nop(); ldf( FloatRegisterImpl::S, O0, O1, F15 ); ldf( FloatRegisterImpl::D, O2, -1, F14 ); ldfsr( O3, O4 ); ldfsr( O5, -1 ); ldxfsr( O6, O7 ); ldxfsr( I0, -1 ); ldfa( FloatRegisterImpl::D, I1, I2, 1, F16 ); ldfa( FloatRegisterImpl::Q, I3, -1, F36 ); ldsb( I4, I5, I6 ); ldsb( I7, -1, G0 ); ldsh( G1, G3, G4 ); ldsh( G5, -1, G6 ); ldsw( G7, L0, L1 ); ldsw( L2, -1, L3 ); ldub( L4, L5, L6 ); ldub( L7, -1, O0 ); lduh( O1, O2, O3 ); lduh( O4, -1, O5 ); lduw( O6, O7, G0 ); lduw( G1, -1, G2 ); ldx( G3, G4, G5 ); ldx( G6, -1, G7 ); ldd( I0, I1, I2 ); ldd( I3, -1, I4 ); ldsba( I5, I6, 2, I7 ); ldsba( L0, -1, L1 ); ldsha( L2, L3, 3, L4 ); ldsha( L5, -1, L6 ); ldswa( L7, O0, (1 << 8) - 1, O1 ); ldswa( O2, -1, O3 ); lduba( O4, O5, 0, O6 ); lduba( O7, -1, I0 ); lduha( I1, I2, 1, I3 ); lduha( I4, -1, I5 ); lduwa( I6, I7, 2, L0 ); lduwa( L1, -1, L2 ); ldxa( L3, L4, 3, L5 ); ldxa( L6, -1, L7 ); ldda( G0, G1, 4, G2 ); ldda( G3, -1, G4 ); ldstub( G5, G6, G7 ); ldstub( O0, -1, O1 ); ldstuba( O2, O3, 5, O4 ); ldstuba( O5, -1, O6 ); and3( I0, L0, O0 ); and3( G7, -1, O7 ); andcc( L2, I2, G2 ); andcc( L4, -1, G4 ); andn( I5, I6, I7 ); andn( I6, -1, I7 ); andncc( I5, I6, I7 ); andncc( I7, -1, I6 ); or3( I5, I6, I7 ); or3( I7, -1, I6 ); orcc( I5, I6, I7 ); orcc( I7, -1, I6 ); orn( I5, I6, I7 ); orn( I7, -1, I6 ); orncc( I5, I6, I7 ); orncc( I7, -1, I6 ); xor3( I5, I6, I7 ); xor3( I7, -1, I6 ); xorcc( I5, I6, I7 ); xorcc( I7, -1, I6 ); xnor( I5, I6, I7 ); xnor( I7, -1, I6 ); xnorcc( I5, I6, I7 ); xnorcc( I7, -1, I6 ); membar( Membar_mask_bits(StoreStore | LoadStore | StoreLoad | LoadLoad | Sync | MemIssue | Lookaside ) ); membar( StoreStore ); membar( LoadStore ); membar( StoreLoad ); membar( LoadLoad ); membar( Sync ); membar( MemIssue ); membar( Lookaside ); fmov( FloatRegisterImpl::S, f_ordered, true, fcc2, F16, F17 ); fmov( FloatRegisterImpl::D, rc_lz, L5, F18, F20 ); movcc( overflowClear, false, icc, I6, L4 ); movcc( f_unorderedOrEqual, true, fcc2, (1 << 10) - 1, O0 ); movr( rc_nz, I5, I6, I7 ); movr( rc_gz, L1, -1, L2 ); mulx( I5, I6, I7 ); mulx( I7, -1, I6 ); sdivx( I5, I6, I7 ); sdivx( I7, -1, I6 ); udivx( I5, I6, I7 ); udivx( I7, -1, I6 ); umul( I5, I6, I7 ); umul( I7, -1, I6 ); smul( I5, I6, I7 ); smul( I7, -1, I6 ); umulcc( I5, I6, I7 ); umulcc( I7, -1, I6 ); smulcc( I5, I6, I7 ); smulcc( I7, -1, I6 ); mulscc( I5, I6, I7 ); mulscc( I7, -1, I6 ); nop(); popc( G0, G1); popc( -1, G2); prefetch( L1, L2, severalReads ); prefetch( L3, -1, oneRead ); prefetcha( O3, O2, 6, severalWritesAndPossiblyReads ); prefetcha( G2, -1, oneWrite ); rett( I7, I7); delayed()->nop(); rett( G0, -1, relocInfo::none); delayed()->nop(); save( I5, I6, I7 ); save( I7, -1, I6 ); restore( I5, I6, I7 ); restore( I7, -1, I6 ); saved(); restored(); sethi( 0xaaaaaaaa, I3, Relocation::spec_simple(relocInfo::none)); sll( I5, I6, I7 ); sll( I7, 31, I6 ); srl( I5, I6, I7 ); srl( I7, 0, I6 ); sra( I5, I6, I7 ); sra( I7, 30, I6 ); sllx( I5, I6, I7 ); sllx( I7, 63, I6 ); srlx( I5, I6, I7 ); srlx( I7, 0, I6 ); srax( I5, I6, I7 ); srax( I7, 62, I6 ); sir( -1 ); stbar(); stf( FloatRegisterImpl::Q, F40, G0, I7 ); stf( FloatRegisterImpl::S, F18, I3, -1 ); stfsr( L1, L2 ); stfsr( I7, -1 ); stxfsr( I6, I5 ); stxfsr( L4, -1 ); stfa( FloatRegisterImpl::D, F22, I6, I7, 7 ); stfa( FloatRegisterImpl::Q, F44, G0, -1 ); stb( L5, O2, I7 ); stb( I7, I6, -1 ); sth( L5, O2, I7 ); sth( I7, I6, -1 ); stw( L5, O2, I7 ); stw( I7, I6, -1 ); stx( L5, O2, I7 ); stx( I7, I6, -1 ); std( L5, O2, I7 ); std( I7, I6, -1 ); stba( L5, O2, I7, 8 ); stba( I7, I6, -1 ); stha( L5, O2, I7, 9 ); stha( I7, I6, -1 ); stwa( L5, O2, I7, 0 ); stwa( I7, I6, -1 ); stxa( L5, O2, I7, 11 ); stxa( I7, I6, -1 ); stda( L5, O2, I7, 12 ); stda( I7, I6, -1 ); sub( I5, I6, I7 ); sub( I7, -1, I6 ); subcc( I5, I6, I7 ); subcc( I7, -1, I6 ); subc( I5, I6, I7 ); subc( I7, -1, I6 ); subccc( I5, I6, I7 ); subccc( I7, -1, I6 ); swap( I5, I6, I7 ); swap( I7, -1, I6 ); swapa( G0, G1, 13, G2 ); swapa( I7, -1, I6 ); taddcc( I5, I6, I7 ); taddcc( I7, -1, I6 ); taddcctv( I5, I6, I7 ); taddcctv( I7, -1, I6 ); tsubcc( I5, I6, I7 ); tsubcc( I7, -1, I6 ); tsubcctv( I5, I6, I7 ); tsubcctv( I7, -1, I6 ); trap( overflowClear, xcc, G0, G1 ); trap( lessEqual, icc, I7, 17 ); bind(lbl2); bind(lbl3); code()->decode(); } // Generate a bunch 'o stuff unique to V8 void Assembler::test_v8_onlys() { Label lbl1; cb( cp_0or1or2, false, pc() - 4, relocInfo::none); delayed()->nop(); cb( cp_never, true, lbl1); delayed()->nop(); cpop1(1, 2, 3, 4); cpop2(5, 6, 7, 8); ldc( I0, I1, 31); ldc( I2, -1, 0); lddc( I4, I4, 30); lddc( I6, 0, 1 ); ldcsr( L0, L1, 0); ldcsr( L1, (1 << 12) - 1, 17 ); stc( 31, L4, L5); stc( 30, L6, -(1 << 12) ); stdc( 0, L7, G0); stdc( 1, G1, 0 ); stcsr( 16, G2, G3); stcsr( 17, G4, 1 ); stdcq( 4, G5, G6); stdcq( 5, G7, -1 ); bind(lbl1); code()->decode(); } #endif // Implementation of MacroAssembler void MacroAssembler::null_check(Register reg, int offset) { if (needs_explicit_null_check((intptr_t)offset)) { // provoke OS NULL exception if reg = NULL by // accessing M[reg] w/o changing any registers ld_ptr(reg, 0, G0); } else { // nothing to do, (later) access of M[reg + offset] // will provoke OS NULL exception if reg = NULL } } // Ring buffer jumps #ifndef PRODUCT void MacroAssembler::ret( bool trace ) { if (trace) { mov(I7, O7); // traceable register JMP(O7, 2 * BytesPerInstWord); } else { jmpl( I7, 2 * BytesPerInstWord, G0 ); } } void MacroAssembler::retl( bool trace ) { if (trace) JMP(O7, 2 * BytesPerInstWord); else jmpl( O7, 2 * BytesPerInstWord, G0 ); } #endif /* PRODUCT */ void MacroAssembler::jmp2(Register r1, Register r2, const char* file, int line ) { assert_not_delayed(); // This can only be traceable if r1 & r2 are visible after a window save if (TraceJumps) { #ifndef PRODUCT save_frame(0); verify_thread(); ld(G2_thread, in_bytes(JavaThread::jmp_ring_index_offset()), O0); add(G2_thread, in_bytes(JavaThread::jmp_ring_offset()), O1); sll(O0, exact_log2(4*sizeof(intptr_t)), O2); add(O2, O1, O1); add(r1->after_save(), r2->after_save(), O2); set((intptr_t)file, O3); set(line, O4); Label L; // get nearby pc, store jmp target call(L, relocInfo::none); // No relocation for call to pc+0x8 delayed()->st(O2, O1, 0); bind(L); // store nearby pc st(O7, O1, sizeof(intptr_t)); // store file st(O3, O1, 2*sizeof(intptr_t)); // store line st(O4, O1, 3*sizeof(intptr_t)); add(O0, 1, O0); and3(O0, JavaThread::jump_ring_buffer_size - 1, O0); st(O0, G2_thread, in_bytes(JavaThread::jmp_ring_index_offset())); restore(); #endif /* PRODUCT */ } jmpl(r1, r2, G0); } void MacroAssembler::jmp(Register r1, int offset, const char* file, int line ) { assert_not_delayed(); // This can only be traceable if r1 is visible after a window save if (TraceJumps) { #ifndef PRODUCT save_frame(0); verify_thread(); ld(G2_thread, in_bytes(JavaThread::jmp_ring_index_offset()), O0); add(G2_thread, in_bytes(JavaThread::jmp_ring_offset()), O1); sll(O0, exact_log2(4*sizeof(intptr_t)), O2); add(O2, O1, O1); add(r1->after_save(), offset, O2); set((intptr_t)file, O3); set(line, O4); Label L; // get nearby pc, store jmp target call(L, relocInfo::none); // No relocation for call to pc+0x8 delayed()->st(O2, O1, 0); bind(L); // store nearby pc st(O7, O1, sizeof(intptr_t)); // store file st(O3, O1, 2*sizeof(intptr_t)); // store line st(O4, O1, 3*sizeof(intptr_t)); add(O0, 1, O0); and3(O0, JavaThread::jump_ring_buffer_size - 1, O0); st(O0, G2_thread, in_bytes(JavaThread::jmp_ring_index_offset())); restore(); #endif /* PRODUCT */ } jmp(r1, offset); } // This code sequence is relocatable to any address, even on LP64. void MacroAssembler::jumpl(AddressLiteral& addrlit, Register temp, Register d, int offset, const char* file, int line) { assert_not_delayed(); // Force fixed length sethi because NativeJump and NativeFarCall don't handle // variable length instruction streams. patchable_sethi(addrlit, temp); Address a(temp, addrlit.low10() + offset); // Add the offset to the displacement. if (TraceJumps) { #ifndef PRODUCT // Must do the add here so relocation can find the remainder of the // value to be relocated. add(a.base(), a.disp(), a.base(), addrlit.rspec(offset)); save_frame(0); verify_thread(); ld(G2_thread, in_bytes(JavaThread::jmp_ring_index_offset()), O0); add(G2_thread, in_bytes(JavaThread::jmp_ring_offset()), O1); sll(O0, exact_log2(4*sizeof(intptr_t)), O2); add(O2, O1, O1); set((intptr_t)file, O3); set(line, O4); Label L; // get nearby pc, store jmp target call(L, relocInfo::none); // No relocation for call to pc+0x8 delayed()->st(a.base()->after_save(), O1, 0); bind(L); // store nearby pc st(O7, O1, sizeof(intptr_t)); // store file st(O3, O1, 2*sizeof(intptr_t)); // store line st(O4, O1, 3*sizeof(intptr_t)); add(O0, 1, O0); and3(O0, JavaThread::jump_ring_buffer_size - 1, O0); st(O0, G2_thread, in_bytes(JavaThread::jmp_ring_index_offset())); restore(); jmpl(a.base(), G0, d); #else jmpl(a.base(), a.disp(), d); #endif /* PRODUCT */ } else { jmpl(a.base(), a.disp(), d); } } void MacroAssembler::jump(AddressLiteral& addrlit, Register temp, int offset, const char* file, int line) { jumpl(addrlit, temp, G0, offset, file, line); } // Convert to C varargs format void MacroAssembler::set_varargs( Argument inArg, Register d ) { // spill register-resident args to their memory slots // (SPARC calling convention requires callers to have already preallocated these) // Note that the inArg might in fact be an outgoing argument, // if a leaf routine or stub does some tricky argument shuffling. // This routine must work even though one of the saved arguments // is in the d register (e.g., set_varargs(Argument(0, false), O0)). for (Argument savePtr = inArg; savePtr.is_register(); savePtr = savePtr.successor()) { st_ptr(savePtr.as_register(), savePtr.address_in_frame()); } // return the address of the first memory slot Address a = inArg.address_in_frame(); add(a.base(), a.disp(), d); } // Conditional breakpoint (for assertion checks in assembly code) void MacroAssembler::breakpoint_trap(Condition c, CC cc) { trap(c, cc, G0, ST_RESERVED_FOR_USER_0); } // We want to use ST_BREAKPOINT here, but the debugger is confused by it. void MacroAssembler::breakpoint_trap() { trap(ST_RESERVED_FOR_USER_0); } // flush windows (except current) using flushw instruction if avail. void MacroAssembler::flush_windows() { if (VM_Version::v9_instructions_work()) flushw(); else flush_windows_trap(); } // Write serialization page so VM thread can do a pseudo remote membar // We use the current thread pointer to calculate a thread specific // offset to write to within the page. This minimizes bus traffic // due to cache line collision. void MacroAssembler::serialize_memory(Register thread, Register tmp1, Register tmp2) { srl(thread, os::get_serialize_page_shift_count(), tmp2); if (Assembler::is_simm13(os::vm_page_size())) { and3(tmp2, (os::vm_page_size() - sizeof(int)), tmp2); } else { set((os::vm_page_size() - sizeof(int)), tmp1); and3(tmp2, tmp1, tmp2); } set(os::get_memory_serialize_page(), tmp1); st(G0, tmp1, tmp2); } void MacroAssembler::enter() { Unimplemented(); } void MacroAssembler::leave() { Unimplemented(); } void MacroAssembler::mult(Register s1, Register s2, Register d) { if(VM_Version::v9_instructions_work()) { mulx (s1, s2, d); } else { smul (s1, s2, d); } } void MacroAssembler::mult(Register s1, int simm13a, Register d) { if(VM_Version::v9_instructions_work()) { mulx (s1, simm13a, d); } else { smul (s1, simm13a, d); } } #ifdef ASSERT void MacroAssembler::read_ccr_v8_assert(Register ccr_save) { const Register s1 = G3_scratch; const Register s2 = G4_scratch; Label get_psr_test; // Get the condition codes the V8 way. read_ccr_trap(s1); mov(ccr_save, s2); // This is a test of V8 which has icc but not xcc // so mask off the xcc bits and3(s2, 0xf, s2); // Compare condition codes from the V8 and V9 ways. subcc(s2, s1, G0); br(Assembler::notEqual, true, Assembler::pt, get_psr_test); delayed()->breakpoint_trap(); bind(get_psr_test); } void MacroAssembler::write_ccr_v8_assert(Register ccr_save) { const Register s1 = G3_scratch; const Register s2 = G4_scratch; Label set_psr_test; // Write out the saved condition codes the V8 way write_ccr_trap(ccr_save, s1, s2); // Read back the condition codes using the V9 instruction rdccr(s1); mov(ccr_save, s2); // This is a test of V8 which has icc but not xcc // so mask off the xcc bits and3(s2, 0xf, s2); and3(s1, 0xf, s1); // Compare the V8 way with the V9 way. subcc(s2, s1, G0); br(Assembler::notEqual, true, Assembler::pt, set_psr_test); delayed()->breakpoint_trap(); bind(set_psr_test); } #else #define read_ccr_v8_assert(x) #define write_ccr_v8_assert(x) #endif // ASSERT void MacroAssembler::read_ccr(Register ccr_save) { if (VM_Version::v9_instructions_work()) { rdccr(ccr_save); // Test code sequence used on V8. Do not move above rdccr. read_ccr_v8_assert(ccr_save); } else { read_ccr_trap(ccr_save); } } void MacroAssembler::write_ccr(Register ccr_save) { if (VM_Version::v9_instructions_work()) { // Test code sequence used on V8. Do not move below wrccr. write_ccr_v8_assert(ccr_save); wrccr(ccr_save); } else { const Register temp_reg1 = G3_scratch; const Register temp_reg2 = G4_scratch; write_ccr_trap(ccr_save, temp_reg1, temp_reg2); } } // Calls to C land #ifdef ASSERT // a hook for debugging static Thread* reinitialize_thread() { return ThreadLocalStorage::thread(); } #else #define reinitialize_thread ThreadLocalStorage::thread #endif #ifdef ASSERT address last_get_thread = NULL; #endif // call this when G2_thread is not known to be valid void MacroAssembler::get_thread() { save_frame(0); // to avoid clobbering O0 mov(G1, L0); // avoid clobbering G1 mov(G5_method, L1); // avoid clobbering G5 mov(G3, L2); // avoid clobbering G3 also mov(G4, L5); // avoid clobbering G4 #ifdef ASSERT AddressLiteral last_get_thread_addrlit(&last_get_thread); set(last_get_thread_addrlit, L3); inc(L4, get_pc(L4) + 2 * BytesPerInstWord); // skip getpc() code + inc + st_ptr to point L4 at call st_ptr(L4, L3, 0); #endif call(CAST_FROM_FN_PTR(address, reinitialize_thread), relocInfo::runtime_call_type); delayed()->nop(); mov(L0, G1); mov(L1, G5_method); mov(L2, G3); mov(L5, G4); restore(O0, 0, G2_thread); } static Thread* verify_thread_subroutine(Thread* gthread_value) { Thread* correct_value = ThreadLocalStorage::thread(); guarantee(gthread_value == correct_value, "G2_thread value must be the thread"); return correct_value; } void MacroAssembler::verify_thread() { if (VerifyThread) { // NOTE: this chops off the heads of the 64-bit O registers. #ifdef CC_INTERP save_frame(0); #else // make sure G2_thread contains the right value save_frame_and_mov(0, Lmethod, Lmethod); // to avoid clobbering O0 (and propagate Lmethod for -Xprof) mov(G1, L1); // avoid clobbering G1 // G2 saved below mov(G3, L3); // avoid clobbering G3 mov(G4, L4); // avoid clobbering G4 mov(G5_method, L5); // avoid clobbering G5_method #endif /* CC_INTERP */ #if defined(COMPILER2) && !defined(_LP64) // Save & restore possible 64-bit Long arguments in G-regs srlx(G1,32,L0); srlx(G4,32,L6); #endif call(CAST_FROM_FN_PTR(address,verify_thread_subroutine), relocInfo::runtime_call_type); delayed()->mov(G2_thread, O0); mov(L1, G1); // Restore G1 // G2 restored below mov(L3, G3); // restore G3 mov(L4, G4); // restore G4 mov(L5, G5_method); // restore G5_method #if defined(COMPILER2) && !defined(_LP64) // Save & restore possible 64-bit Long arguments in G-regs sllx(L0,32,G2); // Move old high G1 bits high in G2 sllx(G1, 0,G1); // Clear current high G1 bits or3 (G1,G2,G1); // Recover 64-bit G1 sllx(L6,32,G2); // Move old high G4 bits high in G2 sllx(G4, 0,G4); // Clear current high G4 bits or3 (G4,G2,G4); // Recover 64-bit G4 #endif restore(O0, 0, G2_thread); } } void MacroAssembler::save_thread(const Register thread_cache) { verify_thread(); if (thread_cache->is_valid()) { assert(thread_cache->is_local() || thread_cache->is_in(), "bad volatile"); mov(G2_thread, thread_cache); } if (VerifyThread) { // smash G2_thread, as if the VM were about to anyway set(0x67676767, G2_thread); } } void MacroAssembler::restore_thread(const Register thread_cache) { if (thread_cache->is_valid()) { assert(thread_cache->is_local() || thread_cache->is_in(), "bad volatile"); mov(thread_cache, G2_thread); verify_thread(); } else { // do it the slow way get_thread(); } } // %%% maybe get rid of [re]set_last_Java_frame void MacroAssembler::set_last_Java_frame(Register last_java_sp, Register last_Java_pc) { assert_not_delayed(); Address flags(G2_thread, JavaThread::frame_anchor_offset() + JavaFrameAnchor::flags_offset()); Address pc_addr(G2_thread, JavaThread::last_Java_pc_offset()); // Always set last_Java_pc and flags first because once last_Java_sp is visible // has_last_Java_frame is true and users will look at the rest of the fields. // (Note: flags should always be zero before we get here so doesn't need to be set.) #ifdef ASSERT // Verify that flags was zeroed on return to Java Label PcOk; save_frame(0); // to avoid clobbering O0 ld_ptr(pc_addr, L0); tst(L0); #ifdef _LP64 brx(Assembler::zero, false, Assembler::pt, PcOk); #else br(Assembler::zero, false, Assembler::pt, PcOk); #endif // _LP64 delayed() -> nop(); stop("last_Java_pc not zeroed before leaving Java"); bind(PcOk); // Verify that flags was zeroed on return to Java Label FlagsOk; ld(flags, L0); tst(L0); br(Assembler::zero, false, Assembler::pt, FlagsOk); delayed() -> restore(); stop("flags not zeroed before leaving Java"); bind(FlagsOk); #endif /* ASSERT */ // // When returning from calling out from Java mode the frame anchor's last_Java_pc // will always be set to NULL. It is set here so that if we are doing a call to // native (not VM) that we capture the known pc and don't have to rely on the // native call having a standard frame linkage where we can find the pc. if (last_Java_pc->is_valid()) { st_ptr(last_Java_pc, pc_addr); } #ifdef _LP64 #ifdef ASSERT // Make sure that we have an odd stack Label StackOk; andcc(last_java_sp, 0x01, G0); br(Assembler::notZero, false, Assembler::pt, StackOk); delayed() -> nop(); stop("Stack Not Biased in set_last_Java_frame"); bind(StackOk); #endif // ASSERT assert( last_java_sp != G4_scratch, "bad register usage in set_last_Java_frame"); add( last_java_sp, STACK_BIAS, G4_scratch ); st_ptr(G4_scratch, G2_thread, JavaThread::last_Java_sp_offset()); #else st_ptr(last_java_sp, G2_thread, JavaThread::last_Java_sp_offset()); #endif // _LP64 } void MacroAssembler::reset_last_Java_frame(void) { assert_not_delayed(); Address sp_addr(G2_thread, JavaThread::last_Java_sp_offset()); Address pc_addr(G2_thread, JavaThread::frame_anchor_offset() + JavaFrameAnchor::last_Java_pc_offset()); Address flags (G2_thread, JavaThread::frame_anchor_offset() + JavaFrameAnchor::flags_offset()); #ifdef ASSERT // check that it WAS previously set #ifdef CC_INTERP save_frame(0); #else save_frame_and_mov(0, Lmethod, Lmethod); // Propagate Lmethod to helper frame for -Xprof #endif /* CC_INTERP */ ld_ptr(sp_addr, L0); tst(L0); breakpoint_trap(Assembler::zero, Assembler::ptr_cc); restore(); #endif // ASSERT st_ptr(G0, sp_addr); // Always return last_Java_pc to zero st_ptr(G0, pc_addr); // Always null flags after return to Java st(G0, flags); } void MacroAssembler::call_VM_base( Register oop_result, Register thread_cache, Register last_java_sp, address entry_point, int number_of_arguments, bool check_exceptions) { assert_not_delayed(); // determine last_java_sp register if (!last_java_sp->is_valid()) { last_java_sp = SP; } // debugging support assert(number_of_arguments >= 0 , "cannot have negative number of arguments"); // 64-bit last_java_sp is biased! set_last_Java_frame(last_java_sp, noreg); if (VerifyThread) mov(G2_thread, O0); // about to be smashed; pass early save_thread(thread_cache); // do the call call(entry_point, relocInfo::runtime_call_type); if (!VerifyThread) delayed()->mov(G2_thread, O0); // pass thread as first argument else delayed()->nop(); // (thread already passed) restore_thread(thread_cache); reset_last_Java_frame(); // check for pending exceptions. use Gtemp as scratch register. if (check_exceptions) { check_and_forward_exception(Gtemp); } // get oop result if there is one and reset the value in the thread if (oop_result->is_valid()) { get_vm_result(oop_result); } } void MacroAssembler::check_and_forward_exception(Register scratch_reg) { Label L; check_and_handle_popframe(scratch_reg); check_and_handle_earlyret(scratch_reg); Address exception_addr(G2_thread, Thread::pending_exception_offset()); ld_ptr(exception_addr, scratch_reg); br_null(scratch_reg,false,pt,L); delayed()->nop(); // we use O7 linkage so that forward_exception_entry has the issuing PC call(StubRoutines::forward_exception_entry(), relocInfo::runtime_call_type); delayed()->nop(); bind(L); } void MacroAssembler::check_and_handle_popframe(Register scratch_reg) { } void MacroAssembler::check_and_handle_earlyret(Register scratch_reg) { } void MacroAssembler::call_VM(Register oop_result, address entry_point, int number_of_arguments, bool check_exceptions) { call_VM_base(oop_result, noreg, noreg, entry_point, number_of_arguments, check_exceptions); } void MacroAssembler::call_VM(Register oop_result, address entry_point, Register arg_1, bool check_exceptions) { // O0 is reserved for the thread mov(arg_1, O1); call_VM(oop_result, entry_point, 1, check_exceptions); } void MacroAssembler::call_VM(Register oop_result, address entry_point, Register arg_1, Register arg_2, bool check_exceptions) { // O0 is reserved for the thread mov(arg_1, O1); mov(arg_2, O2); assert(arg_2 != O1, "smashed argument"); call_VM(oop_result, entry_point, 2, check_exceptions); } void MacroAssembler::call_VM(Register oop_result, address entry_point, Register arg_1, Register arg_2, Register arg_3, bool check_exceptions) { // O0 is reserved for the thread mov(arg_1, O1); mov(arg_2, O2); assert(arg_2 != O1, "smashed argument"); mov(arg_3, O3); assert(arg_3 != O1 && arg_3 != O2, "smashed argument"); call_VM(oop_result, entry_point, 3, check_exceptions); } // Note: The following call_VM overloadings are useful when a "save" // has already been performed by a stub, and the last Java frame is // the previous one. In that case, last_java_sp must be passed as FP // instead of SP. void MacroAssembler::call_VM(Register oop_result, Register last_java_sp, address entry_point, int number_of_arguments, bool check_exceptions) { call_VM_base(oop_result, noreg, last_java_sp, entry_point, number_of_arguments, check_exceptions); } void MacroAssembler::call_VM(Register oop_result, Register last_java_sp, address entry_point, Register arg_1, bool check_exceptions) { // O0 is reserved for the thread mov(arg_1, O1); call_VM(oop_result, last_java_sp, entry_point, 1, check_exceptions); } void MacroAssembler::call_VM(Register oop_result, Register last_java_sp, address entry_point, Register arg_1, Register arg_2, bool check_exceptions) { // O0 is reserved for the thread mov(arg_1, O1); mov(arg_2, O2); assert(arg_2 != O1, "smashed argument"); call_VM(oop_result, last_java_sp, entry_point, 2, check_exceptions); } void MacroAssembler::call_VM(Register oop_result, Register last_java_sp, address entry_point, Register arg_1, Register arg_2, Register arg_3, bool check_exceptions) { // O0 is reserved for the thread mov(arg_1, O1); mov(arg_2, O2); assert(arg_2 != O1, "smashed argument"); mov(arg_3, O3); assert(arg_3 != O1 && arg_3 != O2, "smashed argument"); call_VM(oop_result, last_java_sp, entry_point, 3, check_exceptions); } void MacroAssembler::call_VM_leaf_base(Register thread_cache, address entry_point, int number_of_arguments) { assert_not_delayed(); save_thread(thread_cache); // do the call call(entry_point, relocInfo::runtime_call_type); delayed()->nop(); restore_thread(thread_cache); } void MacroAssembler::call_VM_leaf(Register thread_cache, address entry_point, int number_of_arguments) { call_VM_leaf_base(thread_cache, entry_point, number_of_arguments); } void MacroAssembler::call_VM_leaf(Register thread_cache, address entry_point, Register arg_1) { mov(arg_1, O0); call_VM_leaf(thread_cache, entry_point, 1); } void MacroAssembler::call_VM_leaf(Register thread_cache, address entry_point, Register arg_1, Register arg_2) { mov(arg_1, O0); mov(arg_2, O1); assert(arg_2 != O0, "smashed argument"); call_VM_leaf(thread_cache, entry_point, 2); } void MacroAssembler::call_VM_leaf(Register thread_cache, address entry_point, Register arg_1, Register arg_2, Register arg_3) { mov(arg_1, O0); mov(arg_2, O1); assert(arg_2 != O0, "smashed argument"); mov(arg_3, O2); assert(arg_3 != O0 && arg_3 != O1, "smashed argument"); call_VM_leaf(thread_cache, entry_point, 3); } void MacroAssembler::get_vm_result(Register oop_result) { verify_thread(); Address vm_result_addr(G2_thread, JavaThread::vm_result_offset()); ld_ptr( vm_result_addr, oop_result); st_ptr(G0, vm_result_addr); verify_oop(oop_result); } void MacroAssembler::get_vm_result_2(Register oop_result) { verify_thread(); Address vm_result_addr_2(G2_thread, JavaThread::vm_result_2_offset()); ld_ptr(vm_result_addr_2, oop_result); st_ptr(G0, vm_result_addr_2); verify_oop(oop_result); } // We require that C code which does not return a value in vm_result will // leave it undisturbed. void MacroAssembler::set_vm_result(Register oop_result) { verify_thread(); Address vm_result_addr(G2_thread, JavaThread::vm_result_offset()); verify_oop(oop_result); # ifdef ASSERT // Check that we are not overwriting any other oop. #ifdef CC_INTERP save_frame(0); #else save_frame_and_mov(0, Lmethod, Lmethod); // Propagate Lmethod for -Xprof #endif /* CC_INTERP */ ld_ptr(vm_result_addr, L0); tst(L0); restore(); breakpoint_trap(notZero, Assembler::ptr_cc); // } # endif st_ptr(oop_result, vm_result_addr); } void MacroAssembler::card_table_write(jbyte* byte_map_base, Register tmp, Register obj) { #ifdef _LP64 srlx(obj, CardTableModRefBS::card_shift, obj); #else srl(obj, CardTableModRefBS::card_shift, obj); #endif assert(tmp != obj, "need separate temp reg"); set((address) byte_map_base, tmp); stb(G0, tmp, obj); } void MacroAssembler::internal_sethi(const AddressLiteral& addrlit, Register d, bool ForceRelocatable) { address save_pc; int shiftcnt; #ifdef _LP64 # ifdef CHECK_DELAY assert_not_delayed((char*) "cannot put two instructions in delay slot"); # endif v9_dep(); save_pc = pc(); int msb32 = (int) (addrlit.value() >> 32); int lsb32 = (int) (addrlit.value()); if (msb32 == 0 && lsb32 >= 0) { Assembler::sethi(lsb32, d, addrlit.rspec()); } else if (msb32 == -1) { Assembler::sethi(~lsb32, d, addrlit.rspec()); xor3(d, ~low10(~0), d); } else { Assembler::sethi(msb32, d, addrlit.rspec()); // msb 22-bits if (msb32 & 0x3ff) // Any bits? or3(d, msb32 & 0x3ff, d); // msb 32-bits are now in lsb 32 if (lsb32 & 0xFFFFFC00) { // done? if ((lsb32 >> 20) & 0xfff) { // Any bits set? sllx(d, 12, d); // Make room for next 12 bits or3(d, (lsb32 >> 20) & 0xfff, d); // Or in next 12 shiftcnt = 0; // We already shifted } else shiftcnt = 12; if ((lsb32 >> 10) & 0x3ff) { sllx(d, shiftcnt + 10, d); // Make room for last 10 bits or3(d, (lsb32 >> 10) & 0x3ff, d); // Or in next 10 shiftcnt = 0; } else shiftcnt = 10; sllx(d, shiftcnt + 10, d); // Shift leaving disp field 0'd } else sllx(d, 32, d); } // Pad out the instruction sequence so it can be patched later. if (ForceRelocatable || (addrlit.rtype() != relocInfo::none && addrlit.rtype() != relocInfo::runtime_call_type)) { while (pc() < (save_pc + (7 * BytesPerInstWord))) nop(); } #else Assembler::sethi(addrlit.value(), d, addrlit.rspec()); #endif } void MacroAssembler::sethi(const AddressLiteral& addrlit, Register d) { internal_sethi(addrlit, d, false); } void MacroAssembler::patchable_sethi(const AddressLiteral& addrlit, Register d) { internal_sethi(addrlit, d, true); } int MacroAssembler::size_of_sethi(address a, bool worst_case) { #ifdef _LP64 if (worst_case) return 7; intptr_t iaddr = (intptr_t)a; int hi32 = (int)(iaddr >> 32); int lo32 = (int)(iaddr); int inst_count; if (hi32 == 0 && lo32 >= 0) inst_count = 1; else if (hi32 == -1) inst_count = 2; else { inst_count = 2; if ( hi32 & 0x3ff ) inst_count++; if ( lo32 & 0xFFFFFC00 ) { if( (lo32 >> 20) & 0xfff ) inst_count += 2; if( (lo32 >> 10) & 0x3ff ) inst_count += 2; } } return BytesPerInstWord * inst_count; #else return BytesPerInstWord; #endif } int MacroAssembler::worst_case_size_of_set() { return size_of_sethi(NULL, true) + 1; } void MacroAssembler::internal_set(const AddressLiteral& addrlit, Register d, bool ForceRelocatable) { intptr_t value = addrlit.value(); if (!ForceRelocatable && addrlit.rspec().type() == relocInfo::none) { // can optimize if (-4096 <= value && value <= 4095) { or3(G0, value, d); // setsw (this leaves upper 32 bits sign-extended) return; } if (inv_hi22(hi22(value)) == value) { sethi(addrlit, d); return; } } assert_not_delayed((char*) "cannot put two instructions in delay slot"); internal_sethi(addrlit, d, ForceRelocatable); if (ForceRelocatable || addrlit.rspec().type() != relocInfo::none || addrlit.low10() != 0) { add(d, addrlit.low10(), d, addrlit.rspec()); } } void MacroAssembler::set(const AddressLiteral& al, Register d) { internal_set(al, d, false); } void MacroAssembler::set(intptr_t value, Register d) { AddressLiteral al(value); internal_set(al, d, false); } void MacroAssembler::set(address addr, Register d, RelocationHolder const& rspec) { AddressLiteral al(addr, rspec); internal_set(al, d, false); } void MacroAssembler::patchable_set(const AddressLiteral& al, Register d) { internal_set(al, d, true); } void MacroAssembler::patchable_set(intptr_t value, Register d) { AddressLiteral al(value); internal_set(al, d, true); } void MacroAssembler::set64(jlong value, Register d, Register tmp) { assert_not_delayed(); v9_dep(); int hi = (int)(value >> 32); int lo = (int)(value & ~0); // (Matcher::isSimpleConstant64 knows about the following optimizations.) if (Assembler::is_simm13(lo) && value == lo) { or3(G0, lo, d); } else if (hi == 0) { Assembler::sethi(lo, d); // hardware version zero-extends to upper 32 if (low10(lo) != 0) or3(d, low10(lo), d); } else if (hi == -1) { Assembler::sethi(~lo, d); // hardware version zero-extends to upper 32 xor3(d, low10(lo) ^ ~low10(~0), d); } else if (lo == 0) { if (Assembler::is_simm13(hi)) { or3(G0, hi, d); } else { Assembler::sethi(hi, d); // hardware version zero-extends to upper 32 if (low10(hi) != 0) or3(d, low10(hi), d); } sllx(d, 32, d); } else { Assembler::sethi(hi, tmp); Assembler::sethi(lo, d); // macro assembler version sign-extends if (low10(hi) != 0) or3 (tmp, low10(hi), tmp); if (low10(lo) != 0) or3 ( d, low10(lo), d); sllx(tmp, 32, tmp); or3 (d, tmp, d); } } // compute size in bytes of sparc frame, given // number of extraWords int MacroAssembler::total_frame_size_in_bytes(int extraWords) { int nWords = frame::memory_parameter_word_sp_offset; nWords += extraWords; if (nWords & 1) ++nWords; // round up to double-word return nWords * BytesPerWord; } // save_frame: given number of "extra" words in frame, // issue approp. save instruction (p 200, v8 manual) void MacroAssembler::save_frame(int extraWords = 0) { int delta = -total_frame_size_in_bytes(extraWords); if (is_simm13(delta)) { save(SP, delta, SP); } else { set(delta, G3_scratch); save(SP, G3_scratch, SP); } } void MacroAssembler::save_frame_c1(int size_in_bytes) { if (is_simm13(-size_in_bytes)) { save(SP, -size_in_bytes, SP); } else { set(-size_in_bytes, G3_scratch); save(SP, G3_scratch, SP); } } void MacroAssembler::save_frame_and_mov(int extraWords, Register s1, Register d1, Register s2, Register d2) { assert_not_delayed(); // The trick here is to use precisely the same memory word // that trap handlers also use to save the register. // This word cannot be used for any other purpose, but // it works fine to save the register's value, whether or not // an interrupt flushes register windows at any given moment! Address s1_addr; if (s1->is_valid() && (s1->is_in() || s1->is_local())) { s1_addr = s1->address_in_saved_window(); st_ptr(s1, s1_addr); } Address s2_addr; if (s2->is_valid() && (s2->is_in() || s2->is_local())) { s2_addr = s2->address_in_saved_window(); st_ptr(s2, s2_addr); } save_frame(extraWords); if (s1_addr.base() == SP) { ld_ptr(s1_addr.after_save(), d1); } else if (s1->is_valid()) { mov(s1->after_save(), d1); } if (s2_addr.base() == SP) { ld_ptr(s2_addr.after_save(), d2); } else if (s2->is_valid()) { mov(s2->after_save(), d2); } } AddressLiteral MacroAssembler::allocate_oop_address(jobject obj) { assert(oop_recorder() != NULL, "this assembler needs an OopRecorder"); int oop_index = oop_recorder()->allocate_index(obj); return AddressLiteral(obj, oop_Relocation::spec(oop_index)); } AddressLiteral MacroAssembler::constant_oop_address(jobject obj) { assert(oop_recorder() != NULL, "this assembler needs an OopRecorder"); int oop_index = oop_recorder()->find_index(obj); return AddressLiteral(obj, oop_Relocation::spec(oop_index)); } void MacroAssembler::set_narrow_oop(jobject obj, Register d) { assert(oop_recorder() != NULL, "this assembler needs an OopRecorder"); int oop_index = oop_recorder()->find_index(obj); RelocationHolder rspec = oop_Relocation::spec(oop_index); assert_not_delayed(); // Relocation with special format (see relocInfo_sparc.hpp). relocate(rspec, 1); // Assembler::sethi(0x3fffff, d); emit_long( op(branch_op) | rd(d) | op2(sethi_op2) | hi22(0x3fffff) ); // Don't add relocation for 'add'. Do patching during 'sethi' processing. add(d, 0x3ff, d); } void MacroAssembler::align(int modulus) { while (offset() % modulus != 0) nop(); } void MacroAssembler::safepoint() { relocate(breakpoint_Relocation::spec(breakpoint_Relocation::safepoint)); } void RegistersForDebugging::print(outputStream* s) { int j; for ( j = 0; j < 8; ++j ) if ( j != 6 ) s->print_cr("i%d = 0x%.16lx", j, i[j]); else s->print_cr( "fp = 0x%.16lx", i[j]); s->cr(); for ( j = 0; j < 8; ++j ) s->print_cr("l%d = 0x%.16lx", j, l[j]); s->cr(); for ( j = 0; j < 8; ++j ) if ( j != 6 ) s->print_cr("o%d = 0x%.16lx", j, o[j]); else s->print_cr( "sp = 0x%.16lx", o[j]); s->cr(); for ( j = 0; j < 8; ++j ) s->print_cr("g%d = 0x%.16lx", j, g[j]); s->cr(); // print out floats with compression for (j = 0; j < 32; ) { jfloat val = f[j]; int last = j; for ( ; last+1 < 32; ++last ) { char b1[1024], b2[1024]; sprintf(b1, "%f", val); sprintf(b2, "%f", f[last+1]); if (strcmp(b1, b2)) break; } s->print("f%d", j); if ( j != last ) s->print(" - f%d", last); s->print(" = %f", val); s->fill_to(25); s->print_cr(" (0x%x)", val); j = last + 1; } s->cr(); // and doubles (evens only) for (j = 0; j < 32; ) { jdouble val = d[j]; int last = j; for ( ; last+1 < 32; ++last ) { char b1[1024], b2[1024]; sprintf(b1, "%f", val); sprintf(b2, "%f", d[last+1]); if (strcmp(b1, b2)) break; } s->print("d%d", 2 * j); if ( j != last ) s->print(" - d%d", last); s->print(" = %f", val); s->fill_to(30); s->print("(0x%x)", *(int*)&val); s->fill_to(42); s->print_cr("(0x%x)", *(1 + (int*)&val)); j = last + 1; } s->cr(); } void RegistersForDebugging::save_registers(MacroAssembler* a) { a->sub(FP, round_to(sizeof(RegistersForDebugging), sizeof(jdouble)) - STACK_BIAS, O0); a->flush_windows(); int i; for (i = 0; i < 8; ++i) { a->ld_ptr(as_iRegister(i)->address_in_saved_window().after_save(), L1); a->st_ptr( L1, O0, i_offset(i)); a->ld_ptr(as_lRegister(i)->address_in_saved_window().after_save(), L1); a->st_ptr( L1, O0, l_offset(i)); a->st_ptr(as_oRegister(i)->after_save(), O0, o_offset(i)); a->st_ptr(as_gRegister(i)->after_save(), O0, g_offset(i)); } for (i = 0; i < 32; ++i) { a->stf(FloatRegisterImpl::S, as_FloatRegister(i), O0, f_offset(i)); } for (i = 0; i < (VM_Version::v9_instructions_work() ? 64 : 32); i += 2) { a->stf(FloatRegisterImpl::D, as_FloatRegister(i), O0, d_offset(i)); } } void RegistersForDebugging::restore_registers(MacroAssembler* a, Register r) { for (int i = 1; i < 8; ++i) { a->ld_ptr(r, g_offset(i), as_gRegister(i)); } for (int j = 0; j < 32; ++j) { a->ldf(FloatRegisterImpl::S, O0, f_offset(j), as_FloatRegister(j)); } for (int k = 0; k < (VM_Version::v9_instructions_work() ? 64 : 32); k += 2) { a->ldf(FloatRegisterImpl::D, O0, d_offset(k), as_FloatRegister(k)); } } // pushes double TOS element of FPU stack on CPU stack; pops from FPU stack void MacroAssembler::push_fTOS() { // %%%%%% need to implement this } // pops double TOS element from CPU stack and pushes on FPU stack void MacroAssembler::pop_fTOS() { // %%%%%% need to implement this } void MacroAssembler::empty_FPU_stack() { // %%%%%% need to implement this } void MacroAssembler::_verify_oop(Register reg, const char* msg, const char * file, int line) { // plausibility check for oops if (!VerifyOops) return; if (reg == G0) return; // always NULL, which is always an oop char buffer[64]; #ifdef COMPILER1 if (CommentedAssembly) { snprintf(buffer, sizeof(buffer), "verify_oop at %d", offset()); block_comment(buffer); } #endif int len = strlen(file) + strlen(msg) + 1 + 4; sprintf(buffer, "%d", line); len += strlen(buffer); sprintf(buffer, " at offset %d ", offset()); len += strlen(buffer); char * real_msg = new char[len]; sprintf(real_msg, "%s%s(%s:%d)", msg, buffer, file, line); // Call indirectly to solve generation ordering problem AddressLiteral a(StubRoutines::verify_oop_subroutine_entry_address()); // Make some space on stack above the current register window. // Enough to hold 8 64-bit registers. add(SP,-8*8,SP); // Save some 64-bit registers; a normal 'save' chops the heads off // of 64-bit longs in the 32-bit build. stx(O0,SP,frame::register_save_words*wordSize+STACK_BIAS+0*8); stx(O1,SP,frame::register_save_words*wordSize+STACK_BIAS+1*8); mov(reg,O0); // Move arg into O0; arg might be in O7 which is about to be crushed stx(O7,SP,frame::register_save_words*wordSize+STACK_BIAS+7*8); set((intptr_t)real_msg, O1); // Load address to call to into O7 load_ptr_contents(a, O7); // Register call to verify_oop_subroutine callr(O7, G0); delayed()->nop(); // recover frame size add(SP, 8*8,SP); } void MacroAssembler::_verify_oop_addr(Address addr, const char* msg, const char * file, int line) { // plausibility check for oops if (!VerifyOops) return; char buffer[64]; sprintf(buffer, "%d", line); int len = strlen(file) + strlen(msg) + 1 + 4 + strlen(buffer); sprintf(buffer, " at SP+%d ", addr.disp()); len += strlen(buffer); char * real_msg = new char[len]; sprintf(real_msg, "%s at SP+%d (%s:%d)", msg, addr.disp(), file, line); // Call indirectly to solve generation ordering problem AddressLiteral a(StubRoutines::verify_oop_subroutine_entry_address()); // Make some space on stack above the current register window. // Enough to hold 8 64-bit registers. add(SP,-8*8,SP); // Save some 64-bit registers; a normal 'save' chops the heads off // of 64-bit longs in the 32-bit build. stx(O0,SP,frame::register_save_words*wordSize+STACK_BIAS+0*8); stx(O1,SP,frame::register_save_words*wordSize+STACK_BIAS+1*8); ld_ptr(addr.base(), addr.disp() + 8*8, O0); // Load arg into O0; arg might be in O7 which is about to be crushed stx(O7,SP,frame::register_save_words*wordSize+STACK_BIAS+7*8); set((intptr_t)real_msg, O1); // Load address to call to into O7 load_ptr_contents(a, O7); // Register call to verify_oop_subroutine callr(O7, G0); delayed()->nop(); // recover frame size add(SP, 8*8,SP); } // side-door communication with signalHandler in os_solaris.cpp address MacroAssembler::_verify_oop_implicit_branch[3] = { NULL }; // This macro is expanded just once; it creates shared code. Contract: // receives an oop in O0. Must restore O0 & O7 from TLS. Must not smash ANY // registers, including flags. May not use a register 'save', as this blows // the high bits of the O-regs if they contain Long values. Acts as a 'leaf' // call. void MacroAssembler::verify_oop_subroutine() { assert( VM_Version::v9_instructions_work(), "VerifyOops not supported for V8" ); // Leaf call; no frame. Label succeed, fail, null_or_fail; // O0 and O7 were saved already (O0 in O0's TLS home, O7 in O5's TLS home). // O0 is now the oop to be checked. O7 is the return address. Register O0_obj = O0; // Save some more registers for temps. stx(O2,SP,frame::register_save_words*wordSize+STACK_BIAS+2*8); stx(O3,SP,frame::register_save_words*wordSize+STACK_BIAS+3*8); stx(O4,SP,frame::register_save_words*wordSize+STACK_BIAS+4*8); stx(O5,SP,frame::register_save_words*wordSize+STACK_BIAS+5*8); // Save flags Register O5_save_flags = O5; rdccr( O5_save_flags ); { // count number of verifies Register O2_adr = O2; Register O3_accum = O3; inc_counter(StubRoutines::verify_oop_count_addr(), O2_adr, O3_accum); } Register O2_mask = O2; Register O3_bits = O3; Register O4_temp = O4; // mark lower end of faulting range assert(_verify_oop_implicit_branch[0] == NULL, "set once"); _verify_oop_implicit_branch[0] = pc(); // We can't check the mark oop because it could be in the process of // locking or unlocking while this is running. set(Universe::verify_oop_mask (), O2_mask); set(Universe::verify_oop_bits (), O3_bits); // assert((obj & oop_mask) == oop_bits); and3(O0_obj, O2_mask, O4_temp); cmp(O4_temp, O3_bits); brx(notEqual, false, pn, null_or_fail); delayed()->nop(); if ((NULL_WORD & Universe::verify_oop_mask()) == Universe::verify_oop_bits()) { // the null_or_fail case is useless; must test for null separately br_null(O0_obj, false, pn, succeed); delayed()->nop(); } // Check the klassOop of this object for being in the right area of memory. // Cannot do the load in the delay above slot in case O0 is null load_klass(O0_obj, O0_obj); // assert((klass & klass_mask) == klass_bits); if( Universe::verify_klass_mask() != Universe::verify_oop_mask() ) set(Universe::verify_klass_mask(), O2_mask); if( Universe::verify_klass_bits() != Universe::verify_oop_bits() ) set(Universe::verify_klass_bits(), O3_bits); and3(O0_obj, O2_mask, O4_temp); cmp(O4_temp, O3_bits); brx(notEqual, false, pn, fail); delayed()->nop(); // Check the klass's klass load_klass(O0_obj, O0_obj); and3(O0_obj, O2_mask, O4_temp); cmp(O4_temp, O3_bits); brx(notEqual, false, pn, fail); delayed()->wrccr( O5_save_flags ); // Restore CCR's // mark upper end of faulting range _verify_oop_implicit_branch[1] = pc(); //----------------------- // all tests pass bind(succeed); // Restore prior 64-bit registers ldx(SP,frame::register_save_words*wordSize+STACK_BIAS+0*8,O0); ldx(SP,frame::register_save_words*wordSize+STACK_BIAS+1*8,O1); ldx(SP,frame::register_save_words*wordSize+STACK_BIAS+2*8,O2); ldx(SP,frame::register_save_words*wordSize+STACK_BIAS+3*8,O3); ldx(SP,frame::register_save_words*wordSize+STACK_BIAS+4*8,O4); ldx(SP,frame::register_save_words*wordSize+STACK_BIAS+5*8,O5); retl(); // Leaf return; restore prior O7 in delay slot delayed()->ldx(SP,frame::register_save_words*wordSize+STACK_BIAS+7*8,O7); //----------------------- bind(null_or_fail); // nulls are less common but OK br_null(O0_obj, false, pt, succeed); delayed()->wrccr( O5_save_flags ); // Restore CCR's //----------------------- // report failure: bind(fail); _verify_oop_implicit_branch[2] = pc(); wrccr( O5_save_flags ); // Restore CCR's save_frame(::round_to(sizeof(RegistersForDebugging) / BytesPerWord, 2)); // stop_subroutine expects message pointer in I1. mov(I1, O1); // Restore prior 64-bit registers ldx(FP,frame::register_save_words*wordSize+STACK_BIAS+0*8,I0); ldx(FP,frame::register_save_words*wordSize+STACK_BIAS+1*8,I1); ldx(FP,frame::register_save_words*wordSize+STACK_BIAS+2*8,I2); ldx(FP,frame::register_save_words*wordSize+STACK_BIAS+3*8,I3); ldx(FP,frame::register_save_words*wordSize+STACK_BIAS+4*8,I4); ldx(FP,frame::register_save_words*wordSize+STACK_BIAS+5*8,I5); // factor long stop-sequence into subroutine to save space assert(StubRoutines::Sparc::stop_subroutine_entry_address(), "hasn't been generated yet"); // call indirectly to solve generation ordering problem AddressLiteral al(StubRoutines::Sparc::stop_subroutine_entry_address()); load_ptr_contents(al, O5); jmpl(O5, 0, O7); delayed()->nop(); } void MacroAssembler::stop(const char* msg) { // save frame first to get O7 for return address // add one word to size in case struct is odd number of words long // It must be doubleword-aligned for storing doubles into it. save_frame(::round_to(sizeof(RegistersForDebugging) / BytesPerWord, 2)); // stop_subroutine expects message pointer in I1. set((intptr_t)msg, O1); // factor long stop-sequence into subroutine to save space assert(StubRoutines::Sparc::stop_subroutine_entry_address(), "hasn't been generated yet"); // call indirectly to solve generation ordering problem AddressLiteral a(StubRoutines::Sparc::stop_subroutine_entry_address()); load_ptr_contents(a, O5); jmpl(O5, 0, O7); delayed()->nop(); breakpoint_trap(); // make stop actually stop rather than writing // unnoticeable results in the output files. // restore(); done in callee to save space! } void MacroAssembler::warn(const char* msg) { save_frame(::round_to(sizeof(RegistersForDebugging) / BytesPerWord, 2)); RegistersForDebugging::save_registers(this); mov(O0, L0); set((intptr_t)msg, O0); call( CAST_FROM_FN_PTR(address, warning) ); delayed()->nop(); // ret(); // delayed()->restore(); RegistersForDebugging::restore_registers(this, L0); restore(); } void MacroAssembler::untested(const char* what) { // We must be able to turn interactive prompting off // in order to run automated test scripts on the VM // Use the flag ShowMessageBoxOnError char* b = new char[1024]; sprintf(b, "untested: %s", what); if ( ShowMessageBoxOnError ) stop(b); else warn(b); } void MacroAssembler::stop_subroutine() { RegistersForDebugging::save_registers(this); // for the sake of the debugger, stick a PC on the current frame // (this assumes that the caller has performed an extra "save") mov(I7, L7); add(O7, -7 * BytesPerInt, I7); save_frame(); // one more save to free up another O7 register mov(I0, O1); // addr of reg save area // We expect pointer to message in I1. Caller must set it up in O1 mov(I1, O0); // get msg call (CAST_FROM_FN_PTR(address, MacroAssembler::debug), relocInfo::runtime_call_type); delayed()->nop(); restore(); RegistersForDebugging::restore_registers(this, O0); save_frame(0); call(CAST_FROM_FN_PTR(address,breakpoint)); delayed()->nop(); restore(); mov(L7, I7); retl(); delayed()->restore(); // see stop above } void MacroAssembler::debug(char* msg, RegistersForDebugging* regs) { if ( ShowMessageBoxOnError ) { JavaThreadState saved_state = JavaThread::current()->thread_state(); JavaThread::current()->set_thread_state(_thread_in_vm); { // In order to get locks work, we need to fake a in_VM state ttyLocker ttyl; ::tty->print_cr("EXECUTION STOPPED: %s\n", msg); if (CountBytecodes || TraceBytecodes || StopInterpreterAt) { ::tty->print_cr("Interpreter::bytecode_counter = %d", BytecodeCounter::counter_value()); } if (os::message_box(msg, "Execution stopped, print registers?")) regs->print(::tty); } ThreadStateTransition::transition(JavaThread::current(), _thread_in_vm, saved_state); } else ::tty->print_cr("=============== DEBUG MESSAGE: %s ================\n", msg); assert(false, "error"); } #ifndef PRODUCT void MacroAssembler::test() { ResourceMark rm; CodeBuffer cb("test", 10000, 10000); MacroAssembler* a = new MacroAssembler(&cb); VM_Version::allow_all(); a->test_v9(); a->test_v8_onlys(); VM_Version::revert(); StubRoutines::Sparc::test_stop_entry()(); } #endif void MacroAssembler::calc_mem_param_words(Register Rparam_words, Register Rresult) { subcc( Rparam_words, Argument::n_register_parameters, Rresult); // how many mem words? Label no_extras; br( negative, true, pt, no_extras ); // if neg, clear reg delayed()->set(0, Rresult); // annuled, so only if taken bind( no_extras ); } void MacroAssembler::calc_frame_size(Register Rextra_words, Register Rresult) { #ifdef _LP64 add(Rextra_words, frame::memory_parameter_word_sp_offset, Rresult); #else add(Rextra_words, frame::memory_parameter_word_sp_offset + 1, Rresult); #endif bclr(1, Rresult); sll(Rresult, LogBytesPerWord, Rresult); // Rresult has total frame bytes } void MacroAssembler::calc_frame_size_and_save(Register Rextra_words, Register Rresult) { calc_frame_size(Rextra_words, Rresult); neg(Rresult); save(SP, Rresult, SP); } // --------------------------------------------------------- Assembler::RCondition cond2rcond(Assembler::Condition c) { switch (c) { /*case zero: */ case Assembler::equal: return Assembler::rc_z; case Assembler::lessEqual: return Assembler::rc_lez; case Assembler::less: return Assembler::rc_lz; /*case notZero:*/ case Assembler::notEqual: return Assembler::rc_nz; case Assembler::greater: return Assembler::rc_gz; case Assembler::greaterEqual: return Assembler::rc_gez; } ShouldNotReachHere(); return Assembler::rc_z; } // compares register with zero and branches. NOT FOR USE WITH 64-bit POINTERS void MacroAssembler::br_zero( Condition c, bool a, Predict p, Register s1, Label& L) { tst(s1); br (c, a, p, L); } // Compares a pointer register with zero and branches on null. // Does a test & branch on 32-bit systems and a register-branch on 64-bit. void MacroAssembler::br_null( Register s1, bool a, Predict p, Label& L ) { assert_not_delayed(); #ifdef _LP64 bpr( rc_z, a, p, s1, L ); #else tst(s1); br ( zero, a, p, L ); #endif } void MacroAssembler::br_notnull( Register s1, bool a, Predict p, Label& L ) { assert_not_delayed(); #ifdef _LP64 bpr( rc_nz, a, p, s1, L ); #else tst(s1); br ( notZero, a, p, L ); #endif } void MacroAssembler::br_on_reg_cond( RCondition rc, bool a, Predict p, Register s1, address d, relocInfo::relocType rt ) { if (VM_Version::v9_instructions_work()) { bpr(rc, a, p, s1, d, rt); } else { tst(s1); br(reg_cond_to_cc_cond(rc), a, p, d, rt); } } void MacroAssembler::br_on_reg_cond( RCondition rc, bool a, Predict p, Register s1, Label& L ) { if (VM_Version::v9_instructions_work()) { bpr(rc, a, p, s1, L); } else { tst(s1); br(reg_cond_to_cc_cond(rc), a, p, L); } } // instruction sequences factored across compiler & interpreter void MacroAssembler::lcmp( Register Ra_hi, Register Ra_low, Register Rb_hi, Register Rb_low, Register Rresult) { Label check_low_parts, done; cmp(Ra_hi, Rb_hi ); // compare hi parts br(equal, true, pt, check_low_parts); delayed()->cmp(Ra_low, Rb_low); // test low parts // And, with an unsigned comparison, it does not matter if the numbers // are negative or not. // E.g., -2 cmp -1: the low parts are 0xfffffffe and 0xffffffff. // The second one is bigger (unsignedly). // Other notes: The first move in each triplet can be unconditional // (and therefore probably prefetchable). // And the equals case for the high part does not need testing, // since that triplet is reached only after finding the high halves differ. if (VM_Version::v9_instructions_work()) { mov ( -1, Rresult); ba( false, done ); delayed()-> movcc(greater, false, icc, 1, Rresult); } else { br(less, true, pt, done); delayed()-> set(-1, Rresult); br(greater, true, pt, done); delayed()-> set( 1, Rresult); } bind( check_low_parts ); if (VM_Version::v9_instructions_work()) { mov( -1, Rresult); movcc(equal, false, icc, 0, Rresult); movcc(greaterUnsigned, false, icc, 1, Rresult); } else { set(-1, Rresult); br(equal, true, pt, done); delayed()->set( 0, Rresult); br(greaterUnsigned, true, pt, done); delayed()->set( 1, Rresult); } bind( done ); } void MacroAssembler::lneg( Register Rhi, Register Rlow ) { subcc( G0, Rlow, Rlow ); subc( G0, Rhi, Rhi ); } void MacroAssembler::lshl( Register Rin_high, Register Rin_low, Register Rcount, Register Rout_high, Register Rout_low, Register Rtemp ) { Register Ralt_count = Rtemp; Register Rxfer_bits = Rtemp; assert( Ralt_count != Rin_high && Ralt_count != Rin_low && Ralt_count != Rcount && Rxfer_bits != Rin_low && Rxfer_bits != Rin_high && Rxfer_bits != Rcount && Rxfer_bits != Rout_low && Rout_low != Rin_high, "register alias checks"); Label big_shift, done; // This code can be optimized to use the 64 bit shifts in V9. // Here we use the 32 bit shifts. and3( Rcount, 0x3f, Rcount); // take least significant 6 bits subcc(Rcount, 31, Ralt_count); br(greater, true, pn, big_shift); delayed()-> dec(Ralt_count); // shift < 32 bits, Ralt_count = Rcount-31 // We get the transfer bits by shifting right by 32-count the low // register. This is done by shifting right by 31-count and then by one // more to take care of the special (rare) case where count is zero // (shifting by 32 would not work). neg( Ralt_count ); // The order of the next two instructions is critical in the case where // Rin and Rout are the same and should not be reversed. srl( Rin_low, Ralt_count, Rxfer_bits ); // shift right by 31-count if (Rcount != Rout_low) { sll( Rin_low, Rcount, Rout_low ); // low half } sll( Rin_high, Rcount, Rout_high ); if (Rcount == Rout_low) { sll( Rin_low, Rcount, Rout_low ); // low half } srl( Rxfer_bits, 1, Rxfer_bits ); // shift right by one more ba (false, done); delayed()-> or3( Rout_high, Rxfer_bits, Rout_high); // new hi value: or in shifted old hi part and xfer from low // shift >= 32 bits, Ralt_count = Rcount-32 bind(big_shift); sll( Rin_low, Ralt_count, Rout_high ); clr( Rout_low ); bind(done); } void MacroAssembler::lshr( Register Rin_high, Register Rin_low, Register Rcount, Register Rout_high, Register Rout_low, Register Rtemp ) { Register Ralt_count = Rtemp; Register Rxfer_bits = Rtemp; assert( Ralt_count != Rin_high && Ralt_count != Rin_low && Ralt_count != Rcount && Rxfer_bits != Rin_low && Rxfer_bits != Rin_high && Rxfer_bits != Rcount && Rxfer_bits != Rout_high && Rout_high != Rin_low, "register alias checks"); Label big_shift, done; // This code can be optimized to use the 64 bit shifts in V9. // Here we use the 32 bit shifts. and3( Rcount, 0x3f, Rcount); // take least significant 6 bits subcc(Rcount, 31, Ralt_count); br(greater, true, pn, big_shift); delayed()->dec(Ralt_count); // shift < 32 bits, Ralt_count = Rcount-31 // We get the transfer bits by shifting left by 32-count the high // register. This is done by shifting left by 31-count and then by one // more to take care of the special (rare) case where count is zero // (shifting by 32 would not work). neg( Ralt_count ); if (Rcount != Rout_low) { srl( Rin_low, Rcount, Rout_low ); } // The order of the next two instructions is critical in the case where // Rin and Rout are the same and should not be reversed. sll( Rin_high, Ralt_count, Rxfer_bits ); // shift left by 31-count sra( Rin_high, Rcount, Rout_high ); // high half sll( Rxfer_bits, 1, Rxfer_bits ); // shift left by one more if (Rcount == Rout_low) { srl( Rin_low, Rcount, Rout_low ); } ba (false, done); delayed()-> or3( Rout_low, Rxfer_bits, Rout_low ); // new low value: or shifted old low part and xfer from high // shift >= 32 bits, Ralt_count = Rcount-32 bind(big_shift); sra( Rin_high, Ralt_count, Rout_low ); sra( Rin_high, 31, Rout_high ); // sign into hi bind( done ); } void MacroAssembler::lushr( Register Rin_high, Register Rin_low, Register Rcount, Register Rout_high, Register Rout_low, Register Rtemp ) { Register Ralt_count = Rtemp; Register Rxfer_bits = Rtemp; assert( Ralt_count != Rin_high && Ralt_count != Rin_low && Ralt_count != Rcount && Rxfer_bits != Rin_low && Rxfer_bits != Rin_high && Rxfer_bits != Rcount && Rxfer_bits != Rout_high && Rout_high != Rin_low, "register alias checks"); Label big_shift, done; // This code can be optimized to use the 64 bit shifts in V9. // Here we use the 32 bit shifts. and3( Rcount, 0x3f, Rcount); // take least significant 6 bits subcc(Rcount, 31, Ralt_count); br(greater, true, pn, big_shift); delayed()->dec(Ralt_count); // shift < 32 bits, Ralt_count = Rcount-31 // We get the transfer bits by shifting left by 32-count the high // register. This is done by shifting left by 31-count and then by one // more to take care of the special (rare) case where count is zero // (shifting by 32 would not work). neg( Ralt_count ); if (Rcount != Rout_low) { srl( Rin_low, Rcount, Rout_low ); } // The order of the next two instructions is critical in the case where // Rin and Rout are the same and should not be reversed. sll( Rin_high, Ralt_count, Rxfer_bits ); // shift left by 31-count srl( Rin_high, Rcount, Rout_high ); // high half sll( Rxfer_bits, 1, Rxfer_bits ); // shift left by one more if (Rcount == Rout_low) { srl( Rin_low, Rcount, Rout_low ); } ba (false, done); delayed()-> or3( Rout_low, Rxfer_bits, Rout_low ); // new low value: or shifted old low part and xfer from high // shift >= 32 bits, Ralt_count = Rcount-32 bind(big_shift); srl( Rin_high, Ralt_count, Rout_low ); clr( Rout_high ); bind( done ); } #ifdef _LP64 void MacroAssembler::lcmp( Register Ra, Register Rb, Register Rresult) { cmp(Ra, Rb); mov( -1, Rresult); movcc(equal, false, xcc, 0, Rresult); movcc(greater, false, xcc, 1, Rresult); } #endif void MacroAssembler::float_cmp( bool is_float, int unordered_result, FloatRegister Fa, FloatRegister Fb, Register Rresult) { fcmp(is_float ? FloatRegisterImpl::S : FloatRegisterImpl::D, fcc0, Fa, Fb); Condition lt = unordered_result == -1 ? f_unorderedOrLess : f_less; Condition eq = f_equal; Condition gt = unordered_result == 1 ? f_unorderedOrGreater : f_greater; if (VM_Version::v9_instructions_work()) { mov( -1, Rresult ); movcc( eq, true, fcc0, 0, Rresult ); movcc( gt, true, fcc0, 1, Rresult ); } else { Label done; set( -1, Rresult ); //fb(lt, true, pn, done); delayed()->set( -1, Rresult ); fb( eq, true, pn, done); delayed()->set( 0, Rresult ); fb( gt, true, pn, done); delayed()->set( 1, Rresult ); bind (done); } } void MacroAssembler::fneg( FloatRegisterImpl::Width w, FloatRegister s, FloatRegister d) { if (VM_Version::v9_instructions_work()) { Assembler::fneg(w, s, d); } else { if (w == FloatRegisterImpl::S) { Assembler::fneg(w, s, d); } else if (w == FloatRegisterImpl::D) { // number() does a sanity check on the alignment. assert(((s->encoding(FloatRegisterImpl::D) & 1) == 0) && ((d->encoding(FloatRegisterImpl::D) & 1) == 0), "float register alignment check"); Assembler::fneg(FloatRegisterImpl::S, s, d); Assembler::fmov(FloatRegisterImpl::S, s->successor(), d->successor()); } else { assert(w == FloatRegisterImpl::Q, "Invalid float register width"); // number() does a sanity check on the alignment. assert(((s->encoding(FloatRegisterImpl::D) & 3) == 0) && ((d->encoding(FloatRegisterImpl::D) & 3) == 0), "float register alignment check"); Assembler::fneg(FloatRegisterImpl::S, s, d); Assembler::fmov(FloatRegisterImpl::S, s->successor(), d->successor()); Assembler::fmov(FloatRegisterImpl::S, s->successor()->successor(), d->successor()->successor()); Assembler::fmov(FloatRegisterImpl::S, s->successor()->successor()->successor(), d->successor()->successor()->successor()); } } } void MacroAssembler::fmov( FloatRegisterImpl::Width w, FloatRegister s, FloatRegister d) { if (VM_Version::v9_instructions_work()) { Assembler::fmov(w, s, d); } else { if (w == FloatRegisterImpl::S) { Assembler::fmov(w, s, d); } else if (w == FloatRegisterImpl::D) { // number() does a sanity check on the alignment. assert(((s->encoding(FloatRegisterImpl::D) & 1) == 0) && ((d->encoding(FloatRegisterImpl::D) & 1) == 0), "float register alignment check"); Assembler::fmov(FloatRegisterImpl::S, s, d); Assembler::fmov(FloatRegisterImpl::S, s->successor(), d->successor()); } else { assert(w == FloatRegisterImpl::Q, "Invalid float register width"); // number() does a sanity check on the alignment. assert(((s->encoding(FloatRegisterImpl::D) & 3) == 0) && ((d->encoding(FloatRegisterImpl::D) & 3) == 0), "float register alignment check"); Assembler::fmov(FloatRegisterImpl::S, s, d); Assembler::fmov(FloatRegisterImpl::S, s->successor(), d->successor()); Assembler::fmov(FloatRegisterImpl::S, s->successor()->successor(), d->successor()->successor()); Assembler::fmov(FloatRegisterImpl::S, s->successor()->successor()->successor(), d->successor()->successor()->successor()); } } } void MacroAssembler::fabs( FloatRegisterImpl::Width w, FloatRegister s, FloatRegister d) { if (VM_Version::v9_instructions_work()) { Assembler::fabs(w, s, d); } else { if (w == FloatRegisterImpl::S) { Assembler::fabs(w, s, d); } else if (w == FloatRegisterImpl::D) { // number() does a sanity check on the alignment. assert(((s->encoding(FloatRegisterImpl::D) & 1) == 0) && ((d->encoding(FloatRegisterImpl::D) & 1) == 0), "float register alignment check"); Assembler::fabs(FloatRegisterImpl::S, s, d); Assembler::fmov(FloatRegisterImpl::S, s->successor(), d->successor()); } else { assert(w == FloatRegisterImpl::Q, "Invalid float register width"); // number() does a sanity check on the alignment. assert(((s->encoding(FloatRegisterImpl::D) & 3) == 0) && ((d->encoding(FloatRegisterImpl::D) & 3) == 0), "float register alignment check"); Assembler::fabs(FloatRegisterImpl::S, s, d); Assembler::fmov(FloatRegisterImpl::S, s->successor(), d->successor()); Assembler::fmov(FloatRegisterImpl::S, s->successor()->successor(), d->successor()->successor()); Assembler::fmov(FloatRegisterImpl::S, s->successor()->successor()->successor(), d->successor()->successor()->successor()); } } } void MacroAssembler::save_all_globals_into_locals() { mov(G1,L1); mov(G2,L2); mov(G3,L3); mov(G4,L4); mov(G5,L5); mov(G6,L6); mov(G7,L7); } void MacroAssembler::restore_globals_from_locals() { mov(L1,G1); mov(L2,G2); mov(L3,G3); mov(L4,G4); mov(L5,G5); mov(L6,G6); mov(L7,G7); } // Use for 64 bit operation. void MacroAssembler::casx_under_lock(Register top_ptr_reg, Register top_reg, Register ptr_reg, address lock_addr, bool use_call_vm) { // store ptr_reg as the new top value #ifdef _LP64 casx(top_ptr_reg, top_reg, ptr_reg); #else cas_under_lock(top_ptr_reg, top_reg, ptr_reg, lock_addr, use_call_vm); #endif // _LP64 } // [RGV] This routine does not handle 64 bit operations. // use casx_under_lock() or casx directly!!! void MacroAssembler::cas_under_lock(Register top_ptr_reg, Register top_reg, Register ptr_reg, address lock_addr, bool use_call_vm) { // store ptr_reg as the new top value if (VM_Version::v9_instructions_work()) { cas(top_ptr_reg, top_reg, ptr_reg); } else { // If the register is not an out nor global, it is not visible // after the save. Allocate a register for it, save its // value in the register save area (the save may not flush // registers to the save area). Register top_ptr_reg_after_save; Register top_reg_after_save; Register ptr_reg_after_save; if (top_ptr_reg->is_out() || top_ptr_reg->is_global()) { top_ptr_reg_after_save = top_ptr_reg->after_save(); } else { Address reg_save_addr = top_ptr_reg->address_in_saved_window(); top_ptr_reg_after_save = L0; st(top_ptr_reg, reg_save_addr); } if (top_reg->is_out() || top_reg->is_global()) { top_reg_after_save = top_reg->after_save(); } else { Address reg_save_addr = top_reg->address_in_saved_window(); top_reg_after_save = L1; st(top_reg, reg_save_addr); } if (ptr_reg->is_out() || ptr_reg->is_global()) { ptr_reg_after_save = ptr_reg->after_save(); } else { Address reg_save_addr = ptr_reg->address_in_saved_window(); ptr_reg_after_save = L2; st(ptr_reg, reg_save_addr); } const Register& lock_reg = L3; const Register& lock_ptr_reg = L4; const Register& value_reg = L5; const Register& yield_reg = L6; const Register& yieldall_reg = L7; save_frame(); if (top_ptr_reg_after_save == L0) { ld(top_ptr_reg->address_in_saved_window().after_save(), top_ptr_reg_after_save); } if (top_reg_after_save == L1) { ld(top_reg->address_in_saved_window().after_save(), top_reg_after_save); } if (ptr_reg_after_save == L2) { ld(ptr_reg->address_in_saved_window().after_save(), ptr_reg_after_save); } Label(retry_get_lock); Label(not_same); Label(dont_yield); assert(lock_addr, "lock_address should be non null for v8"); set((intptr_t)lock_addr, lock_ptr_reg); // Initialize yield counter mov(G0,yield_reg); mov(G0, yieldall_reg); set(StubRoutines::Sparc::locked, lock_reg); bind(retry_get_lock); cmp(yield_reg, V8AtomicOperationUnderLockSpinCount); br(Assembler::less, false, Assembler::pt, dont_yield); delayed()->nop(); if(use_call_vm) { Untested("Need to verify global reg consistancy"); call_VM(noreg, CAST_FROM_FN_PTR(address, SharedRuntime::yield_all), yieldall_reg); } else { // Save the regs and make space for a C call save(SP, -96, SP); save_all_globals_into_locals(); call(CAST_FROM_FN_PTR(address,os::yield_all)); delayed()->mov(yieldall_reg, O0); restore_globals_from_locals(); restore(); } // reset the counter mov(G0,yield_reg); add(yieldall_reg, 1, yieldall_reg); bind(dont_yield); // try to get lock swap(lock_ptr_reg, 0, lock_reg); // did we get the lock? cmp(lock_reg, StubRoutines::Sparc::unlocked); br(Assembler::notEqual, true, Assembler::pn, retry_get_lock); delayed()->add(yield_reg,1,yield_reg); // yes, got lock. do we have the same top? ld(top_ptr_reg_after_save, 0, value_reg); cmp(value_reg, top_reg_after_save); br(Assembler::notEqual, false, Assembler::pn, not_same); delayed()->nop(); // yes, same top. st(ptr_reg_after_save, top_ptr_reg_after_save, 0); membar(Assembler::StoreStore); bind(not_same); mov(value_reg, ptr_reg_after_save); st(lock_reg, lock_ptr_reg, 0); // unlock restore(); } } RegisterOrConstant MacroAssembler::delayed_value_impl(intptr_t* delayed_value_addr, Register tmp, int offset) { intptr_t value = *delayed_value_addr; if (value != 0) return RegisterOrConstant(value + offset); // load indirectly to solve generation ordering problem AddressLiteral a(delayed_value_addr); load_ptr_contents(a, tmp); #ifdef ASSERT tst(tmp); breakpoint_trap(zero, xcc); #endif if (offset != 0) add(tmp, offset, tmp); return RegisterOrConstant(tmp); } void MacroAssembler::regcon_inc_ptr( RegisterOrConstant& dest, RegisterOrConstant src, Register temp ) { assert(dest.register_or_noreg() != G0, "lost side effect"); if ((src.is_constant() && src.as_constant() == 0) || (src.is_register() && src.as_register() == G0)) { // do nothing } else if (dest.is_register()) { add(dest.as_register(), ensure_simm13_or_reg(src, temp), dest.as_register()); } else if (src.is_constant()) { intptr_t res = dest.as_constant() + src.as_constant(); dest = RegisterOrConstant(res); // side effect seen by caller } else { assert(temp != noreg, "cannot handle constant += register"); add(src.as_register(), ensure_simm13_or_reg(dest, temp), temp); dest = RegisterOrConstant(temp); // side effect seen by caller } } void MacroAssembler::regcon_sll_ptr( RegisterOrConstant& dest, RegisterOrConstant src, Register temp ) { assert(dest.register_or_noreg() != G0, "lost side effect"); if (!is_simm13(src.constant_or_zero())) src = (src.as_constant() & 0xFF); if ((src.is_constant() && src.as_constant() == 0) || (src.is_register() && src.as_register() == G0)) { // do nothing } else if (dest.is_register()) { sll_ptr(dest.as_register(), src, dest.as_register()); } else if (src.is_constant()) { intptr_t res = dest.as_constant() << src.as_constant(); dest = RegisterOrConstant(res); // side effect seen by caller } else { assert(temp != noreg, "cannot handle constant <<= register"); set(dest.as_constant(), temp); sll_ptr(temp, src, temp); dest = RegisterOrConstant(temp); // side effect seen by caller } } // Look up the method for a megamorphic invokeinterface call. // The target method is determined by . // The receiver klass is in recv_klass. // On success, the result will be in method_result, and execution falls through. // On failure, execution transfers to the given label. void MacroAssembler::lookup_interface_method(Register recv_klass, Register intf_klass, RegisterOrConstant itable_index, Register method_result, Register scan_temp, Register sethi_temp, Label& L_no_such_interface) { assert_different_registers(recv_klass, intf_klass, method_result, scan_temp); assert(itable_index.is_constant() || itable_index.as_register() == method_result, "caller must use same register for non-constant itable index as for method"); // Compute start of first itableOffsetEntry (which is at the end of the vtable) int vtable_base = instanceKlass::vtable_start_offset() * wordSize; int scan_step = itableOffsetEntry::size() * wordSize; int vte_size = vtableEntry::size() * wordSize; lduw(recv_klass, instanceKlass::vtable_length_offset() * wordSize, scan_temp); // %%% We should store the aligned, prescaled offset in the klassoop. // Then the next several instructions would fold away. int round_to_unit = ((HeapWordsPerLong > 1) ? BytesPerLong : 0); int itb_offset = vtable_base; if (round_to_unit != 0) { // hoist first instruction of round_to(scan_temp, BytesPerLong): itb_offset += round_to_unit - wordSize; } int itb_scale = exact_log2(vtableEntry::size() * wordSize); sll(scan_temp, itb_scale, scan_temp); add(scan_temp, itb_offset, scan_temp); if (round_to_unit != 0) { // Round up to align_object_offset boundary // see code for instanceKlass::start_of_itable! // Was: round_to(scan_temp, BytesPerLong); // Hoisted: add(scan_temp, BytesPerLong-1, scan_temp); and3(scan_temp, -round_to_unit, scan_temp); } add(recv_klass, scan_temp, scan_temp); // Adjust recv_klass by scaled itable_index, so we can free itable_index. RegisterOrConstant itable_offset = itable_index; regcon_sll_ptr(itable_offset, exact_log2(itableMethodEntry::size() * wordSize)); regcon_inc_ptr(itable_offset, itableMethodEntry::method_offset_in_bytes()); add(recv_klass, ensure_simm13_or_reg(itable_offset, sethi_temp), recv_klass); // for (scan = klass->itable(); scan->interface() != NULL; scan += scan_step) { // if (scan->interface() == intf) { // result = (klass + scan->offset() + itable_index); // } // } Label search, found_method; for (int peel = 1; peel >= 0; peel--) { // %%%% Could load both offset and interface in one ldx, if they were // in the opposite order. This would save a load. ld_ptr(scan_temp, itableOffsetEntry::interface_offset_in_bytes(), method_result); // Check that this entry is non-null. A null entry means that // the receiver class doesn't implement the interface, and wasn't the // same as when the caller was compiled. bpr(Assembler::rc_z, false, Assembler::pn, method_result, L_no_such_interface); delayed()->cmp(method_result, intf_klass); if (peel) { brx(Assembler::equal, false, Assembler::pt, found_method); } else { brx(Assembler::notEqual, false, Assembler::pn, search); // (invert the test to fall through to found_method...) } delayed()->add(scan_temp, scan_step, scan_temp); if (!peel) break; bind(search); } bind(found_method); // Got a hit. int ito_offset = itableOffsetEntry::offset_offset_in_bytes(); // scan_temp[-scan_step] points to the vtable offset we need ito_offset -= scan_step; lduw(scan_temp, ito_offset, scan_temp); ld_ptr(recv_klass, scan_temp, method_result); } void MacroAssembler::check_klass_subtype(Register sub_klass, Register super_klass, Register temp_reg, Register temp2_reg, Label& L_success) { Label L_failure, L_pop_to_failure; check_klass_subtype_fast_path(sub_klass, super_klass, temp_reg, temp2_reg, &L_success, &L_failure, NULL); Register sub_2 = sub_klass; Register sup_2 = super_klass; if (!sub_2->is_global()) sub_2 = L0; if (!sup_2->is_global()) sup_2 = L1; save_frame_and_mov(0, sub_klass, sub_2, super_klass, sup_2); check_klass_subtype_slow_path(sub_2, sup_2, L2, L3, L4, L5, NULL, &L_pop_to_failure); // on success: restore(); ba(false, L_success); delayed()->nop(); // on failure: bind(L_pop_to_failure); restore(); bind(L_failure); } void MacroAssembler::check_klass_subtype_fast_path(Register sub_klass, Register super_klass, Register temp_reg, Register temp2_reg, Label* L_success, Label* L_failure, Label* L_slow_path, RegisterOrConstant super_check_offset, Register instanceof_hack) { int sc_offset = (klassOopDesc::header_size() * HeapWordSize + Klass::secondary_super_cache_offset_in_bytes()); int sco_offset = (klassOopDesc::header_size() * HeapWordSize + Klass::super_check_offset_offset_in_bytes()); bool must_load_sco = (super_check_offset.constant_or_zero() == -1); bool need_slow_path = (must_load_sco || super_check_offset.constant_or_zero() == sco_offset); assert_different_registers(sub_klass, super_klass, temp_reg); if (super_check_offset.is_register()) { assert_different_registers(sub_klass, super_klass, super_check_offset.as_register()); } else if (must_load_sco) { assert(temp2_reg != noreg, "supply either a temp or a register offset"); } Label L_fallthrough; int label_nulls = 0; if (L_success == NULL) { L_success = &L_fallthrough; label_nulls++; } if (L_failure == NULL) { L_failure = &L_fallthrough; label_nulls++; } if (L_slow_path == NULL) { L_slow_path = &L_fallthrough; label_nulls++; } assert(label_nulls <= 1 || instanceof_hack != noreg || (L_slow_path == &L_fallthrough && label_nulls <= 2 && !need_slow_path), "at most one NULL in the batch, usually"); // Support for the instanceof hack, which uses delay slots to // set a destination register to zero or one. bool do_bool_sets = (instanceof_hack != noreg); #define BOOL_SET(bool_value) \ if (do_bool_sets && bool_value >= 0) \ set(bool_value, instanceof_hack) #define DELAYED_BOOL_SET(bool_value) \ if (do_bool_sets && bool_value >= 0) \ delayed()->set(bool_value, instanceof_hack); \ else delayed()->nop() // Hacked ba(), which may only be used just before L_fallthrough. #define FINAL_JUMP(label, bool_value) \ if (&(label) == &L_fallthrough) { \ BOOL_SET(bool_value); \ } else { \ ba((do_bool_sets && bool_value >= 0), label); \ DELAYED_BOOL_SET(bool_value); \ } // If the pointers are equal, we are done (e.g., String[] elements). // This self-check enables sharing of secondary supertype arrays among // non-primary types such as array-of-interface. Otherwise, each such // type would need its own customized SSA. // We move this check to the front of the fast path because many // type checks are in fact trivially successful in this manner, // so we get a nicely predicted branch right at the start of the check. cmp(super_klass, sub_klass); brx(Assembler::equal, do_bool_sets, Assembler::pn, *L_success); DELAYED_BOOL_SET(1); // Check the supertype display: if (must_load_sco) { // The super check offset is always positive... lduw(super_klass, sco_offset, temp2_reg); super_check_offset = RegisterOrConstant(temp2_reg); } ld_ptr(sub_klass, super_check_offset, temp_reg); cmp(super_klass, temp_reg); // This check has worked decisively for primary supers. // Secondary supers are sought in the super_cache ('super_cache_addr'). // (Secondary supers are interfaces and very deeply nested subtypes.) // This works in the same check above because of a tricky aliasing // between the super_cache and the primary super display elements. // (The 'super_check_addr' can address either, as the case requires.) // Note that the cache is updated below if it does not help us find // what we need immediately. // So if it was a primary super, we can just fail immediately. // Otherwise, it's the slow path for us (no success at this point). if (super_check_offset.is_register()) { brx(Assembler::equal, do_bool_sets, Assembler::pn, *L_success); delayed(); if (do_bool_sets) BOOL_SET(1); // if !do_bool_sets, sneak the next cmp into the delay slot: cmp(super_check_offset.as_register(), sc_offset); if (L_failure == &L_fallthrough) { brx(Assembler::equal, do_bool_sets, Assembler::pt, *L_slow_path); delayed()->nop(); BOOL_SET(0); // fallthrough on failure } else { brx(Assembler::notEqual, do_bool_sets, Assembler::pn, *L_failure); DELAYED_BOOL_SET(0); FINAL_JUMP(*L_slow_path, -1); // -1 => vanilla delay slot } } else if (super_check_offset.as_constant() == sc_offset) { // Need a slow path; fast failure is impossible. if (L_slow_path == &L_fallthrough) { brx(Assembler::equal, do_bool_sets, Assembler::pt, *L_success); DELAYED_BOOL_SET(1); } else { brx(Assembler::notEqual, false, Assembler::pn, *L_slow_path); delayed()->nop(); FINAL_JUMP(*L_success, 1); } } else { // No slow path; it's a fast decision. if (L_failure == &L_fallthrough) { brx(Assembler::equal, do_bool_sets, Assembler::pt, *L_success); DELAYED_BOOL_SET(1); BOOL_SET(0); } else { brx(Assembler::notEqual, do_bool_sets, Assembler::pn, *L_failure); DELAYED_BOOL_SET(0); FINAL_JUMP(*L_success, 1); } } bind(L_fallthrough); #undef final_jump #undef bool_set #undef DELAYED_BOOL_SET #undef final_jump } void MacroAssembler::check_klass_subtype_slow_path(Register sub_klass, Register super_klass, Register count_temp, Register scan_temp, Register scratch_reg, Register coop_reg, Label* L_success, Label* L_failure) { assert_different_registers(sub_klass, super_klass, count_temp, scan_temp, scratch_reg, coop_reg); Label L_fallthrough, L_loop; int label_nulls = 0; if (L_success == NULL) { L_success = &L_fallthrough; label_nulls++; } if (L_failure == NULL) { L_failure = &L_fallthrough; label_nulls++; } assert(label_nulls <= 1, "at most one NULL in the batch"); // a couple of useful fields in sub_klass: int ss_offset = (klassOopDesc::header_size() * HeapWordSize + Klass::secondary_supers_offset_in_bytes()); int sc_offset = (klassOopDesc::header_size() * HeapWordSize + Klass::secondary_super_cache_offset_in_bytes()); // Do a linear scan of the secondary super-klass chain. // This code is rarely used, so simplicity is a virtue here. #ifndef PRODUCT int* pst_counter = &SharedRuntime::_partial_subtype_ctr; inc_counter((address) pst_counter, count_temp, scan_temp); #endif // We will consult the secondary-super array. ld_ptr(sub_klass, ss_offset, scan_temp); // Compress superclass if necessary. Register search_key = super_klass; bool decode_super_klass = false; if (UseCompressedOops) { if (coop_reg != noreg) { encode_heap_oop_not_null(super_klass, coop_reg); search_key = coop_reg; } else { encode_heap_oop_not_null(super_klass); decode_super_klass = true; // scarce temps! } // The superclass is never null; it would be a basic system error if a null // pointer were to sneak in here. Note that we have already loaded the // Klass::super_check_offset from the super_klass in the fast path, // so if there is a null in that register, we are already in the afterlife. } // Load the array length. (Positive movl does right thing on LP64.) lduw(scan_temp, arrayOopDesc::length_offset_in_bytes(), count_temp); // Check for empty secondary super list tst(count_temp); // Top of search loop bind(L_loop); br(Assembler::equal, false, Assembler::pn, *L_failure); delayed()->add(scan_temp, heapOopSize, scan_temp); assert(heapOopSize != 0, "heapOopSize should be initialized"); // Skip the array header in all array accesses. int elem_offset = arrayOopDesc::base_offset_in_bytes(T_OBJECT); elem_offset -= heapOopSize; // the scan pointer was pre-incremented also // Load next super to check if (UseCompressedOops) { // Don't use load_heap_oop; we don't want to decode the element. lduw( scan_temp, elem_offset, scratch_reg ); } else { ld_ptr( scan_temp, elem_offset, scratch_reg ); } // Look for Rsuper_klass on Rsub_klass's secondary super-class-overflow list cmp(scratch_reg, search_key); // A miss means we are NOT a subtype and need to keep looping brx(Assembler::notEqual, false, Assembler::pn, L_loop); delayed()->deccc(count_temp); // decrement trip counter in delay slot // Falling out the bottom means we found a hit; we ARE a subtype if (decode_super_klass) decode_heap_oop(super_klass); // Success. Cache the super we found and proceed in triumph. st_ptr(super_klass, sub_klass, sc_offset); if (L_success != &L_fallthrough) { ba(false, *L_success); delayed()->nop(); } bind(L_fallthrough); } void MacroAssembler::check_method_handle_type(Register mtype_reg, Register mh_reg, Register temp_reg, Label& wrong_method_type) { assert_different_registers(mtype_reg, mh_reg, temp_reg); // compare method type against that of the receiver RegisterOrConstant mhtype_offset = delayed_value(java_dyn_MethodHandle::type_offset_in_bytes, temp_reg); ld_ptr(mh_reg, mhtype_offset, temp_reg); cmp(temp_reg, mtype_reg); br(Assembler::notEqual, false, Assembler::pn, wrong_method_type); delayed()->nop(); } void MacroAssembler::jump_to_method_handle_entry(Register mh_reg, Register temp_reg) { assert(mh_reg == G3_method_handle, "caller must put MH object in G3"); assert_different_registers(mh_reg, temp_reg); // pick out the interpreted side of the handler ld_ptr(mh_reg, delayed_value(java_dyn_MethodHandle::vmentry_offset_in_bytes, temp_reg), temp_reg); // off we go... ld_ptr(temp_reg, MethodHandleEntry::from_interpreted_entry_offset_in_bytes(), temp_reg); jmp(temp_reg, 0); // for the various stubs which take control at this point, // see MethodHandles::generate_method_handle_stub // (Can any caller use this delay slot? If so, add an option for supression.) delayed()->nop(); } RegisterOrConstant MacroAssembler::argument_offset(RegisterOrConstant arg_slot, int extra_slot_offset) { // cf. TemplateTable::prepare_invoke(), if (load_receiver). int stackElementSize = Interpreter::stackElementWords() * wordSize; int offset = Interpreter::expr_offset_in_bytes(extra_slot_offset+0); int offset1 = Interpreter::expr_offset_in_bytes(extra_slot_offset+1); assert(offset1 - offset == stackElementSize, "correct arithmetic"); if (arg_slot.is_constant()) { offset += arg_slot.as_constant() * stackElementSize; return offset; } else { Register temp = arg_slot.as_register(); sll_ptr(temp, exact_log2(stackElementSize), temp); if (offset != 0) add(temp, offset, temp); return temp; } } void MacroAssembler::biased_locking_enter(Register obj_reg, Register mark_reg, Register temp_reg, Label& done, Label* slow_case, BiasedLockingCounters* counters) { assert(UseBiasedLocking, "why call this otherwise?"); if (PrintBiasedLockingStatistics) { assert_different_registers(obj_reg, mark_reg, temp_reg, O7); if (counters == NULL) counters = BiasedLocking::counters(); } Label cas_label; // Biased locking // See whether the lock is currently biased toward our thread and // whether the epoch is still valid // Note that the runtime guarantees sufficient alignment of JavaThread // pointers to allow age to be placed into low bits assert(markOopDesc::age_shift == markOopDesc::lock_bits + markOopDesc::biased_lock_bits, "biased locking makes assumptions about bit layout"); and3(mark_reg, markOopDesc::biased_lock_mask_in_place, temp_reg); cmp(temp_reg, markOopDesc::biased_lock_pattern); brx(Assembler::notEqual, false, Assembler::pn, cas_label); delayed()->nop(); load_klass(obj_reg, temp_reg); ld_ptr(Address(temp_reg, Klass::prototype_header_offset_in_bytes() + klassOopDesc::klass_part_offset_in_bytes()), temp_reg); or3(G2_thread, temp_reg, temp_reg); xor3(mark_reg, temp_reg, temp_reg); andcc(temp_reg, ~((int) markOopDesc::age_mask_in_place), temp_reg); if (counters != NULL) { cond_inc(Assembler::equal, (address) counters->biased_lock_entry_count_addr(), mark_reg, temp_reg); // Reload mark_reg as we may need it later ld_ptr(Address(obj_reg, oopDesc::mark_offset_in_bytes()), mark_reg); } brx(Assembler::equal, true, Assembler::pt, done); delayed()->nop(); Label try_revoke_bias; Label try_rebias; Address mark_addr = Address(obj_reg, oopDesc::mark_offset_in_bytes()); assert(mark_addr.disp() == 0, "cas must take a zero displacement"); // At this point we know that the header has the bias pattern and // that we are not the bias owner in the current epoch. We need to // figure out more details about the state of the header in order to // know what operations can be legally performed on the object's // header. // If the low three bits in the xor result aren't clear, that means // the prototype header is no longer biased and we have to revoke // the bias on this object. btst(markOopDesc::biased_lock_mask_in_place, temp_reg); brx(Assembler::notZero, false, Assembler::pn, try_revoke_bias); // Biasing is still enabled for this data type. See whether the // epoch of the current bias is still valid, meaning that the epoch // bits of the mark word are equal to the epoch bits of the // prototype header. (Note that the prototype header's epoch bits // only change at a safepoint.) If not, attempt to rebias the object // toward the current thread. Note that we must be absolutely sure // that the current epoch is invalid in order to do this because // otherwise the manipulations it performs on the mark word are // illegal. delayed()->btst(markOopDesc::epoch_mask_in_place, temp_reg); brx(Assembler::notZero, false, Assembler::pn, try_rebias); // The epoch of the current bias is still valid but we know nothing // about the owner; it might be set or it might be clear. Try to // acquire the bias of the object using an atomic operation. If this // fails we will go in to the runtime to revoke the object's bias. // Note that we first construct the presumed unbiased header so we // don't accidentally blow away another thread's valid bias. delayed()->and3(mark_reg, markOopDesc::biased_lock_mask_in_place | markOopDesc::age_mask_in_place | markOopDesc::epoch_mask_in_place, mark_reg); or3(G2_thread, mark_reg, temp_reg); casn(mark_addr.base(), mark_reg, temp_reg); // If the biasing toward our thread failed, this means that // another thread succeeded in biasing it toward itself and we // need to revoke that bias. The revocation will occur in the // interpreter runtime in the slow case. cmp(mark_reg, temp_reg); if (counters != NULL) { cond_inc(Assembler::zero, (address) counters->anonymously_biased_lock_entry_count_addr(), mark_reg, temp_reg); } if (slow_case != NULL) { brx(Assembler::notEqual, true, Assembler::pn, *slow_case); delayed()->nop(); } br(Assembler::always, false, Assembler::pt, done); delayed()->nop(); bind(try_rebias); // At this point we know the epoch has expired, meaning that the // current "bias owner", if any, is actually invalid. Under these // circumstances _only_, we are allowed to use the current header's // value as the comparison value when doing the cas to acquire the // bias in the current epoch. In other words, we allow transfer of // the bias from one thread to another directly in this situation. // // FIXME: due to a lack of registers we currently blow away the age // bits in this situation. Should attempt to preserve them. load_klass(obj_reg, temp_reg); ld_ptr(Address(temp_reg, Klass::prototype_header_offset_in_bytes() + klassOopDesc::klass_part_offset_in_bytes()), temp_reg); or3(G2_thread, temp_reg, temp_reg); casn(mark_addr.base(), mark_reg, temp_reg); // If the biasing toward our thread failed, this means that // another thread succeeded in biasing it toward itself and we // need to revoke that bias. The revocation will occur in the // interpreter runtime in the slow case. cmp(mark_reg, temp_reg); if (counters != NULL) { cond_inc(Assembler::zero, (address) counters->rebiased_lock_entry_count_addr(), mark_reg, temp_reg); } if (slow_case != NULL) { brx(Assembler::notEqual, true, Assembler::pn, *slow_case); delayed()->nop(); } br(Assembler::always, false, Assembler::pt, done); delayed()->nop(); bind(try_revoke_bias); // The prototype mark in the klass doesn't have the bias bit set any // more, indicating that objects of this data type are not supposed // to be biased any more. We are going to try to reset the mark of // this object to the prototype value and fall through to the // CAS-based locking scheme. Note that if our CAS fails, it means // that another thread raced us for the privilege of revoking the // bias of this particular object, so it's okay to continue in the // normal locking code. // // FIXME: due to a lack of registers we currently blow away the age // bits in this situation. Should attempt to preserve them. load_klass(obj_reg, temp_reg); ld_ptr(Address(temp_reg, Klass::prototype_header_offset_in_bytes() + klassOopDesc::klass_part_offset_in_bytes()), temp_reg); casn(mark_addr.base(), mark_reg, temp_reg); // Fall through to the normal CAS-based lock, because no matter what // the result of the above CAS, some thread must have succeeded in // removing the bias bit from the object's header. if (counters != NULL) { cmp(mark_reg, temp_reg); cond_inc(Assembler::zero, (address) counters->revoked_lock_entry_count_addr(), mark_reg, temp_reg); } bind(cas_label); } void MacroAssembler::biased_locking_exit (Address mark_addr, Register temp_reg, Label& done, bool allow_delay_slot_filling) { // Check for biased locking unlock case, which is a no-op // Note: we do not have to check the thread ID for two reasons. // First, the interpreter checks for IllegalMonitorStateException at // a higher level. Second, if the bias was revoked while we held the // lock, the object could not be rebiased toward another thread, so // the bias bit would be clear. ld_ptr(mark_addr, temp_reg); and3(temp_reg, markOopDesc::biased_lock_mask_in_place, temp_reg); cmp(temp_reg, markOopDesc::biased_lock_pattern); brx(Assembler::equal, allow_delay_slot_filling, Assembler::pt, done); delayed(); if (!allow_delay_slot_filling) { nop(); } } // CASN -- 32-64 bit switch hitter similar to the synthetic CASN provided by // Solaris/SPARC's "as". Another apt name would be cas_ptr() void MacroAssembler::casn (Register addr_reg, Register cmp_reg, Register set_reg ) { casx_under_lock (addr_reg, cmp_reg, set_reg, (address)StubRoutines::Sparc::atomic_memory_operation_lock_addr()) ; } // compiler_lock_object() and compiler_unlock_object() are direct transliterations // of i486.ad fast_lock() and fast_unlock(). See those methods for detailed comments. // The code could be tightened up considerably. // // box->dhw disposition - post-conditions at DONE_LABEL. // - Successful inflated lock: box->dhw != 0. // Any non-zero value suffices. // Consider G2_thread, rsp, boxReg, or unused_mark() // - Successful Stack-lock: box->dhw == mark. // box->dhw must contain the displaced mark word value // - Failure -- icc.ZFlag == 0 and box->dhw is undefined. // The slow-path fast_enter() and slow_enter() operators // are responsible for setting box->dhw = NonZero (typically ::unused_mark). // - Biased: box->dhw is undefined // // SPARC refworkload performance - specifically jetstream and scimark - are // extremely sensitive to the size of the code emitted by compiler_lock_object // and compiler_unlock_object. Critically, the key factor is code size, not path // length. (Simply experiments to pad CLO with unexecuted NOPs demonstrte the // effect). void MacroAssembler::compiler_lock_object(Register Roop, Register Rmark, Register Rbox, Register Rscratch, BiasedLockingCounters* counters, bool try_bias) { Address mark_addr(Roop, oopDesc::mark_offset_in_bytes()); verify_oop(Roop); Label done ; if (counters != NULL) { inc_counter((address) counters->total_entry_count_addr(), Rmark, Rscratch); } if (EmitSync & 1) { mov (3, Rscratch) ; st_ptr (Rscratch, Rbox, BasicLock::displaced_header_offset_in_bytes()); cmp (SP, G0) ; return ; } if (EmitSync & 2) { // Fetch object's markword ld_ptr(mark_addr, Rmark); if (try_bias) { biased_locking_enter(Roop, Rmark, Rscratch, done, NULL, counters); } // Save Rbox in Rscratch to be used for the cas operation mov(Rbox, Rscratch); // set Rmark to markOop | markOopDesc::unlocked_value or3(Rmark, markOopDesc::unlocked_value, Rmark); // Initialize the box. (Must happen before we update the object mark!) st_ptr(Rmark, Rbox, BasicLock::displaced_header_offset_in_bytes()); // compare object markOop with Rmark and if equal exchange Rscratch with object markOop assert(mark_addr.disp() == 0, "cas must take a zero displacement"); casx_under_lock(mark_addr.base(), Rmark, Rscratch, (address)StubRoutines::Sparc::atomic_memory_operation_lock_addr()); // if compare/exchange succeeded we found an unlocked object and we now have locked it // hence we are done cmp(Rmark, Rscratch); #ifdef _LP64 sub(Rscratch, STACK_BIAS, Rscratch); #endif brx(Assembler::equal, false, Assembler::pt, done); delayed()->sub(Rscratch, SP, Rscratch); //pull next instruction into delay slot // we did not find an unlocked object so see if this is a recursive case // sub(Rscratch, SP, Rscratch); assert(os::vm_page_size() > 0xfff, "page size too small - change the constant"); andcc(Rscratch, 0xfffff003, Rscratch); st_ptr(Rscratch, Rbox, BasicLock::displaced_header_offset_in_bytes()); bind (done) ; return ; } Label Egress ; if (EmitSync & 256) { Label IsInflated ; ld_ptr (mark_addr, Rmark); // fetch obj->mark // Triage: biased, stack-locked, neutral, inflated if (try_bias) { biased_locking_enter(Roop, Rmark, Rscratch, done, NULL, counters); // Invariant: if control reaches this point in the emitted stream // then Rmark has not been modified. } // Store mark into displaced mark field in the on-stack basic-lock "box" // Critically, this must happen before the CAS // Maximize the ST-CAS distance to minimize the ST-before-CAS penalty. st_ptr (Rmark, Rbox, BasicLock::displaced_header_offset_in_bytes()); andcc (Rmark, 2, G0) ; brx (Assembler::notZero, false, Assembler::pn, IsInflated) ; delayed() -> // Try stack-lock acquisition. // Beware: the 1st instruction is in a delay slot mov (Rbox, Rscratch); or3 (Rmark, markOopDesc::unlocked_value, Rmark); assert (mark_addr.disp() == 0, "cas must take a zero displacement"); casn (mark_addr.base(), Rmark, Rscratch) ; cmp (Rmark, Rscratch); brx (Assembler::equal, false, Assembler::pt, done); delayed()->sub(Rscratch, SP, Rscratch); // Stack-lock attempt failed - check for recursive stack-lock. // See the comments below about how we might remove this case. #ifdef _LP64 sub (Rscratch, STACK_BIAS, Rscratch); #endif assert(os::vm_page_size() > 0xfff, "page size too small - change the constant"); andcc (Rscratch, 0xfffff003, Rscratch); br (Assembler::always, false, Assembler::pt, done) ; delayed()-> st_ptr (Rscratch, Rbox, BasicLock::displaced_header_offset_in_bytes()); bind (IsInflated) ; if (EmitSync & 64) { // If m->owner != null goto IsLocked // Pessimistic form: Test-and-CAS vs CAS // The optimistic form avoids RTS->RTO cache line upgrades. ld_ptr (Rmark, ObjectMonitor::owner_offset_in_bytes() - 2, Rscratch); andcc (Rscratch, Rscratch, G0) ; brx (Assembler::notZero, false, Assembler::pn, done) ; delayed()->nop() ; // m->owner == null : it's unlocked. } // Try to CAS m->owner from null to Self // Invariant: if we acquire the lock then _recursions should be 0. add (Rmark, ObjectMonitor::owner_offset_in_bytes()-2, Rmark) ; mov (G2_thread, Rscratch) ; casn (Rmark, G0, Rscratch) ; cmp (Rscratch, G0) ; // Intentional fall-through into done } else { // Aggressively avoid the Store-before-CAS penalty // Defer the store into box->dhw until after the CAS Label IsInflated, Recursive ; // Anticipate CAS -- Avoid RTS->RTO upgrade // prefetch (mark_addr, Assembler::severalWritesAndPossiblyReads) ; ld_ptr (mark_addr, Rmark); // fetch obj->mark // Triage: biased, stack-locked, neutral, inflated if (try_bias) { biased_locking_enter(Roop, Rmark, Rscratch, done, NULL, counters); // Invariant: if control reaches this point in the emitted stream // then Rmark has not been modified. } andcc (Rmark, 2, G0) ; brx (Assembler::notZero, false, Assembler::pn, IsInflated) ; delayed()-> // Beware - dangling delay-slot // Try stack-lock acquisition. // Transiently install BUSY (0) encoding in the mark word. // if the CAS of 0 into the mark was successful then we execute: // ST box->dhw = mark -- save fetched mark in on-stack basiclock box // ST obj->mark = box -- overwrite transient 0 value // This presumes TSO, of course. mov (0, Rscratch) ; or3 (Rmark, markOopDesc::unlocked_value, Rmark); assert (mark_addr.disp() == 0, "cas must take a zero displacement"); casn (mark_addr.base(), Rmark, Rscratch) ; // prefetch (mark_addr, Assembler::severalWritesAndPossiblyReads) ; cmp (Rscratch, Rmark) ; brx (Assembler::notZero, false, Assembler::pn, Recursive) ; delayed() -> st_ptr (Rmark, Rbox, BasicLock::displaced_header_offset_in_bytes()); if (counters != NULL) { cond_inc(Assembler::equal, (address) counters->fast_path_entry_count_addr(), Rmark, Rscratch); } br (Assembler::always, false, Assembler::pt, done); delayed() -> st_ptr (Rbox, mark_addr) ; bind (Recursive) ; // Stack-lock attempt failed - check for recursive stack-lock. // Tests show that we can remove the recursive case with no impact // on refworkload 0.83. If we need to reduce the size of the code // emitted by compiler_lock_object() the recursive case is perfect // candidate. // // A more extreme idea is to always inflate on stack-lock recursion. // This lets us eliminate the recursive checks in compiler_lock_object // and compiler_unlock_object and the (box->dhw == 0) encoding. // A brief experiment - requiring changes to synchronizer.cpp, interpreter, // and showed a performance *increase*. In the same experiment I eliminated // the fast-path stack-lock code from the interpreter and always passed // control to the "slow" operators in synchronizer.cpp. // RScratch contains the fetched obj->mark value from the failed CASN. #ifdef _LP64 sub (Rscratch, STACK_BIAS, Rscratch); #endif sub(Rscratch, SP, Rscratch); assert(os::vm_page_size() > 0xfff, "page size too small - change the constant"); andcc (Rscratch, 0xfffff003, Rscratch); if (counters != NULL) { // Accounting needs the Rscratch register st_ptr (Rscratch, Rbox, BasicLock::displaced_header_offset_in_bytes()); cond_inc(Assembler::equal, (address) counters->fast_path_entry_count_addr(), Rmark, Rscratch); br (Assembler::always, false, Assembler::pt, done) ; delayed()->nop() ; } else { br (Assembler::always, false, Assembler::pt, done) ; delayed()-> st_ptr (Rscratch, Rbox, BasicLock::displaced_header_offset_in_bytes()); } bind (IsInflated) ; if (EmitSync & 64) { // If m->owner != null goto IsLocked // Test-and-CAS vs CAS // Pessimistic form avoids futile (doomed) CAS attempts // The optimistic form avoids RTS->RTO cache line upgrades. ld_ptr (Rmark, ObjectMonitor::owner_offset_in_bytes() - 2, Rscratch); andcc (Rscratch, Rscratch, G0) ; brx (Assembler::notZero, false, Assembler::pn, done) ; delayed()->nop() ; // m->owner == null : it's unlocked. } // Try to CAS m->owner from null to Self // Invariant: if we acquire the lock then _recursions should be 0. add (Rmark, ObjectMonitor::owner_offset_in_bytes()-2, Rmark) ; mov (G2_thread, Rscratch) ; casn (Rmark, G0, Rscratch) ; cmp (Rscratch, G0) ; // ST box->displaced_header = NonZero. // Any non-zero value suffices: // unused_mark(), G2_thread, RBox, RScratch, rsp, etc. st_ptr (Rbox, Rbox, BasicLock::displaced_header_offset_in_bytes()); // Intentional fall-through into done } bind (done) ; } void MacroAssembler::compiler_unlock_object(Register Roop, Register Rmark, Register Rbox, Register Rscratch, bool try_bias) { Address mark_addr(Roop, oopDesc::mark_offset_in_bytes()); Label done ; if (EmitSync & 4) { cmp (SP, G0) ; return ; } if (EmitSync & 8) { if (try_bias) { biased_locking_exit(mark_addr, Rscratch, done); } // Test first if it is a fast recursive unlock ld_ptr(Rbox, BasicLock::displaced_header_offset_in_bytes(), Rmark); cmp(Rmark, G0); brx(Assembler::equal, false, Assembler::pt, done); delayed()->nop(); // Check if it is still a light weight lock, this is is true if we see // the stack address of the basicLock in the markOop of the object assert(mark_addr.disp() == 0, "cas must take a zero displacement"); casx_under_lock(mark_addr.base(), Rbox, Rmark, (address)StubRoutines::Sparc::atomic_memory_operation_lock_addr()); br (Assembler::always, false, Assembler::pt, done); delayed()->cmp(Rbox, Rmark); bind (done) ; return ; } // Beware ... If the aggregate size of the code emitted by CLO and CUO is // is too large performance rolls abruptly off a cliff. // This could be related to inlining policies, code cache management, or // I$ effects. Label LStacked ; if (try_bias) { // TODO: eliminate redundant LDs of obj->mark biased_locking_exit(mark_addr, Rscratch, done); } ld_ptr (Roop, oopDesc::mark_offset_in_bytes(), Rmark) ; ld_ptr (Rbox, BasicLock::displaced_header_offset_in_bytes(), Rscratch); andcc (Rscratch, Rscratch, G0); brx (Assembler::zero, false, Assembler::pn, done); delayed()-> nop() ; // consider: relocate fetch of mark, above, into this DS andcc (Rmark, 2, G0) ; brx (Assembler::zero, false, Assembler::pt, LStacked) ; delayed()-> nop() ; // It's inflated // Conceptually we need a #loadstore|#storestore "release" MEMBAR before // the ST of 0 into _owner which releases the lock. This prevents loads // and stores within the critical section from reordering (floating) // past the store that releases the lock. But TSO is a strong memory model // and that particular flavor of barrier is a noop, so we can safely elide it. // Note that we use 1-0 locking by default for the inflated case. We // close the resultant (and rare) race by having contented threads in // monitorenter periodically poll _owner. ld_ptr (Rmark, ObjectMonitor::owner_offset_in_bytes() - 2, Rscratch); ld_ptr (Rmark, ObjectMonitor::recursions_offset_in_bytes() - 2, Rbox); xor3 (Rscratch, G2_thread, Rscratch) ; orcc (Rbox, Rscratch, Rbox) ; brx (Assembler::notZero, false, Assembler::pn, done) ; delayed()-> ld_ptr (Rmark, ObjectMonitor::EntryList_offset_in_bytes() - 2, Rscratch); ld_ptr (Rmark, ObjectMonitor::cxq_offset_in_bytes() - 2, Rbox); orcc (Rbox, Rscratch, G0) ; if (EmitSync & 65536) { Label LSucc ; brx (Assembler::notZero, false, Assembler::pn, LSucc) ; delayed()->nop() ; br (Assembler::always, false, Assembler::pt, done) ; delayed()-> st_ptr (G0, Rmark, ObjectMonitor::owner_offset_in_bytes() - 2); bind (LSucc) ; st_ptr (G0, Rmark, ObjectMonitor::owner_offset_in_bytes() - 2); if (os::is_MP()) { membar (StoreLoad) ; } ld_ptr (Rmark, ObjectMonitor::succ_offset_in_bytes() - 2, Rscratch); andcc (Rscratch, Rscratch, G0) ; brx (Assembler::notZero, false, Assembler::pt, done) ; delayed()-> andcc (G0, G0, G0) ; add (Rmark, ObjectMonitor::owner_offset_in_bytes()-2, Rmark) ; mov (G2_thread, Rscratch) ; casn (Rmark, G0, Rscratch) ; cmp (Rscratch, G0) ; // invert icc.zf and goto done brx (Assembler::notZero, false, Assembler::pt, done) ; delayed() -> cmp (G0, G0) ; br (Assembler::always, false, Assembler::pt, done); delayed() -> cmp (G0, 1) ; } else { brx (Assembler::notZero, false, Assembler::pn, done) ; delayed()->nop() ; br (Assembler::always, false, Assembler::pt, done) ; delayed()-> st_ptr (G0, Rmark, ObjectMonitor::owner_offset_in_bytes() - 2); } bind (LStacked) ; // Consider: we could replace the expensive CAS in the exit // path with a simple ST of the displaced mark value fetched from // the on-stack basiclock box. That admits a race where a thread T2 // in the slow lock path -- inflating with monitor M -- could race a // thread T1 in the fast unlock path, resulting in a missed wakeup for T2. // More precisely T1 in the stack-lock unlock path could "stomp" the // inflated mark value M installed by T2, resulting in an orphan // object monitor M and T2 becoming stranded. We can remedy that situation // by having T2 periodically poll the object's mark word using timed wait // operations. If T2 discovers that a stomp has occurred it vacates // the monitor M and wakes any other threads stranded on the now-orphan M. // In addition the monitor scavenger, which performs deflation, // would also need to check for orpan monitors and stranded threads. // // Finally, inflation is also used when T2 needs to assign a hashCode // to O and O is stack-locked by T1. The "stomp" race could cause // an assigned hashCode value to be lost. We can avoid that condition // and provide the necessary hashCode stability invariants by ensuring // that hashCode generation is idempotent between copying GCs. // For example we could compute the hashCode of an object O as // O's heap address XOR some high quality RNG value that is refreshed // at GC-time. The monitor scavenger would install the hashCode // found in any orphan monitors. Again, the mechanism admits a // lost-update "stomp" WAW race but detects and recovers as needed. // // A prototype implementation showed excellent results, although // the scavenger and timeout code was rather involved. casn (mark_addr.base(), Rbox, Rscratch) ; cmp (Rbox, Rscratch); // Intentional fall through into done ... bind (done) ; } void MacroAssembler::print_CPU_state() { // %%%%% need to implement this } void MacroAssembler::verify_FPU(int stack_depth, const char* s) { // %%%%% need to implement this } void MacroAssembler::push_IU_state() { // %%%%% need to implement this } void MacroAssembler::pop_IU_state() { // %%%%% need to implement this } void MacroAssembler::push_FPU_state() { // %%%%% need to implement this } void MacroAssembler::pop_FPU_state() { // %%%%% need to implement this } void MacroAssembler::push_CPU_state() { // %%%%% need to implement this } void MacroAssembler::pop_CPU_state() { // %%%%% need to implement this } void MacroAssembler::verify_tlab() { #ifdef ASSERT if (UseTLAB && VerifyOops) { Label next, next2, ok; Register t1 = L0; Register t2 = L1; Register t3 = L2; save_frame(0); ld_ptr(G2_thread, in_bytes(JavaThread::tlab_top_offset()), t1); ld_ptr(G2_thread, in_bytes(JavaThread::tlab_start_offset()), t2); or3(t1, t2, t3); cmp(t1, t2); br(Assembler::greaterEqual, false, Assembler::pn, next); delayed()->nop(); stop("assert(top >= start)"); should_not_reach_here(); bind(next); ld_ptr(G2_thread, in_bytes(JavaThread::tlab_top_offset()), t1); ld_ptr(G2_thread, in_bytes(JavaThread::tlab_end_offset()), t2); or3(t3, t2, t3); cmp(t1, t2); br(Assembler::lessEqual, false, Assembler::pn, next2); delayed()->nop(); stop("assert(top <= end)"); should_not_reach_here(); bind(next2); and3(t3, MinObjAlignmentInBytesMask, t3); cmp(t3, 0); br(Assembler::lessEqual, false, Assembler::pn, ok); delayed()->nop(); stop("assert(aligned)"); should_not_reach_here(); bind(ok); restore(); } #endif } void MacroAssembler::eden_allocate( Register obj, // result: pointer to object after successful allocation Register var_size_in_bytes, // object size in bytes if unknown at compile time; invalid otherwise int con_size_in_bytes, // object size in bytes if known at compile time Register t1, // temp register Register t2, // temp register Label& slow_case // continuation point if fast allocation fails ){ // make sure arguments make sense assert_different_registers(obj, var_size_in_bytes, t1, t2); assert(0 <= con_size_in_bytes && Assembler::is_simm13(con_size_in_bytes), "illegal object size"); assert((con_size_in_bytes & MinObjAlignmentInBytesMask) == 0, "object size is not multiple of alignment"); if (CMSIncrementalMode || !Universe::heap()->supports_inline_contig_alloc()) { // No allocation in the shared eden. br(Assembler::always, false, Assembler::pt, slow_case); delayed()->nop(); } else { // get eden boundaries // note: we need both top & top_addr! const Register top_addr = t1; const Register end = t2; CollectedHeap* ch = Universe::heap(); set((intx)ch->top_addr(), top_addr); intx delta = (intx)ch->end_addr() - (intx)ch->top_addr(); ld_ptr(top_addr, delta, end); ld_ptr(top_addr, 0, obj); // try to allocate Label retry; bind(retry); #ifdef ASSERT // make sure eden top is properly aligned { Label L; btst(MinObjAlignmentInBytesMask, obj); br(Assembler::zero, false, Assembler::pt, L); delayed()->nop(); stop("eden top is not properly aligned"); bind(L); } #endif // ASSERT const Register free = end; sub(end, obj, free); // compute amount of free space if (var_size_in_bytes->is_valid()) { // size is unknown at compile time cmp(free, var_size_in_bytes); br(Assembler::lessUnsigned, false, Assembler::pn, slow_case); // if there is not enough space go the slow case delayed()->add(obj, var_size_in_bytes, end); } else { // size is known at compile time cmp(free, con_size_in_bytes); br(Assembler::lessUnsigned, false, Assembler::pn, slow_case); // if there is not enough space go the slow case delayed()->add(obj, con_size_in_bytes, end); } // Compare obj with the value at top_addr; if still equal, swap the value of // end with the value at top_addr. If not equal, read the value at top_addr // into end. casx_under_lock(top_addr, obj, end, (address)StubRoutines::Sparc::atomic_memory_operation_lock_addr()); // if someone beat us on the allocation, try again, otherwise continue cmp(obj, end); brx(Assembler::notEqual, false, Assembler::pn, retry); delayed()->mov(end, obj); // nop if successfull since obj == end #ifdef ASSERT // make sure eden top is properly aligned { Label L; const Register top_addr = t1; set((intx)ch->top_addr(), top_addr); ld_ptr(top_addr, 0, top_addr); btst(MinObjAlignmentInBytesMask, top_addr); br(Assembler::zero, false, Assembler::pt, L); delayed()->nop(); stop("eden top is not properly aligned"); bind(L); } #endif // ASSERT } } void MacroAssembler::tlab_allocate( Register obj, // result: pointer to object after successful allocation Register var_size_in_bytes, // object size in bytes if unknown at compile time; invalid otherwise int con_size_in_bytes, // object size in bytes if known at compile time Register t1, // temp register Label& slow_case // continuation point if fast allocation fails ){ // make sure arguments make sense assert_different_registers(obj, var_size_in_bytes, t1); assert(0 <= con_size_in_bytes && is_simm13(con_size_in_bytes), "illegal object size"); assert((con_size_in_bytes & MinObjAlignmentInBytesMask) == 0, "object size is not multiple of alignment"); const Register free = t1; verify_tlab(); ld_ptr(G2_thread, in_bytes(JavaThread::tlab_top_offset()), obj); // calculate amount of free space ld_ptr(G2_thread, in_bytes(JavaThread::tlab_end_offset()), free); sub(free, obj, free); Label done; if (var_size_in_bytes == noreg) { cmp(free, con_size_in_bytes); } else { cmp(free, var_size_in_bytes); } br(Assembler::less, false, Assembler::pn, slow_case); // calculate the new top pointer if (var_size_in_bytes == noreg) { delayed()->add(obj, con_size_in_bytes, free); } else { delayed()->add(obj, var_size_in_bytes, free); } bind(done); #ifdef ASSERT // make sure new free pointer is properly aligned { Label L; btst(MinObjAlignmentInBytesMask, free); br(Assembler::zero, false, Assembler::pt, L); delayed()->nop(); stop("updated TLAB free is not properly aligned"); bind(L); } #endif // ASSERT // update the tlab top pointer st_ptr(free, G2_thread, in_bytes(JavaThread::tlab_top_offset())); verify_tlab(); } void MacroAssembler::tlab_refill(Label& retry, Label& try_eden, Label& slow_case) { Register top = O0; Register t1 = G1; Register t2 = G3; Register t3 = O1; assert_different_registers(top, t1, t2, t3, G4, G5 /* preserve G4 and G5 */); Label do_refill, discard_tlab; if (CMSIncrementalMode || !Universe::heap()->supports_inline_contig_alloc()) { // No allocation in the shared eden. br(Assembler::always, false, Assembler::pt, slow_case); delayed()->nop(); } ld_ptr(G2_thread, in_bytes(JavaThread::tlab_top_offset()), top); ld_ptr(G2_thread, in_bytes(JavaThread::tlab_end_offset()), t1); ld_ptr(G2_thread, in_bytes(JavaThread::tlab_refill_waste_limit_offset()), t2); // calculate amount of free space sub(t1, top, t1); srl_ptr(t1, LogHeapWordSize, t1); // Retain tlab and allocate object in shared space if // the amount free in the tlab is too large to discard. cmp(t1, t2); brx(Assembler::lessEqual, false, Assembler::pt, discard_tlab); // increment waste limit to prevent getting stuck on this slow path delayed()->add(t2, ThreadLocalAllocBuffer::refill_waste_limit_increment(), t2); st_ptr(t2, G2_thread, in_bytes(JavaThread::tlab_refill_waste_limit_offset())); if (TLABStats) { // increment number of slow_allocations ld(G2_thread, in_bytes(JavaThread::tlab_slow_allocations_offset()), t2); add(t2, 1, t2); stw(t2, G2_thread, in_bytes(JavaThread::tlab_slow_allocations_offset())); } br(Assembler::always, false, Assembler::pt, try_eden); delayed()->nop(); bind(discard_tlab); if (TLABStats) { // increment number of refills ld(G2_thread, in_bytes(JavaThread::tlab_number_of_refills_offset()), t2); add(t2, 1, t2); stw(t2, G2_thread, in_bytes(JavaThread::tlab_number_of_refills_offset())); // accumulate wastage ld(G2_thread, in_bytes(JavaThread::tlab_fast_refill_waste_offset()), t2); add(t2, t1, t2); stw(t2, G2_thread, in_bytes(JavaThread::tlab_fast_refill_waste_offset())); } // if tlab is currently allocated (top or end != null) then // fill [top, end + alignment_reserve) with array object br_null(top, false, Assembler::pn, do_refill); delayed()->nop(); set((intptr_t)markOopDesc::prototype()->copy_set_hash(0x2), t2); st_ptr(t2, top, oopDesc::mark_offset_in_bytes()); // set up the mark word // set klass to intArrayKlass sub(t1, typeArrayOopDesc::header_size(T_INT), t1); add(t1, ThreadLocalAllocBuffer::alignment_reserve(), t1); sll_ptr(t1, log2_intptr(HeapWordSize/sizeof(jint)), t1); st(t1, top, arrayOopDesc::length_offset_in_bytes()); set((intptr_t)Universe::intArrayKlassObj_addr(), t2); ld_ptr(t2, 0, t2); // store klass last. concurrent gcs assumes klass length is valid if // klass field is not null. store_klass(t2, top); verify_oop(top); // refill the tlab with an eden allocation bind(do_refill); ld_ptr(G2_thread, in_bytes(JavaThread::tlab_size_offset()), t1); sll_ptr(t1, LogHeapWordSize, t1); // add object_size ?? eden_allocate(top, t1, 0, t2, t3, slow_case); st_ptr(top, G2_thread, in_bytes(JavaThread::tlab_start_offset())); st_ptr(top, G2_thread, in_bytes(JavaThread::tlab_top_offset())); #ifdef ASSERT // check that tlab_size (t1) is still valid { Label ok; ld_ptr(G2_thread, in_bytes(JavaThread::tlab_size_offset()), t2); sll_ptr(t2, LogHeapWordSize, t2); cmp(t1, t2); br(Assembler::equal, false, Assembler::pt, ok); delayed()->nop(); stop("assert(t1 == tlab_size)"); should_not_reach_here(); bind(ok); } #endif // ASSERT add(top, t1, top); // t1 is tlab_size sub(top, ThreadLocalAllocBuffer::alignment_reserve_in_bytes(), top); st_ptr(top, G2_thread, in_bytes(JavaThread::tlab_end_offset())); verify_tlab(); br(Assembler::always, false, Assembler::pt, retry); delayed()->nop(); } Assembler::Condition MacroAssembler::negate_condition(Assembler::Condition cond) { switch (cond) { // Note some conditions are synonyms for others case Assembler::never: return Assembler::always; case Assembler::zero: return Assembler::notZero; case Assembler::lessEqual: return Assembler::greater; case Assembler::less: return Assembler::greaterEqual; case Assembler::lessEqualUnsigned: return Assembler::greaterUnsigned; case Assembler::lessUnsigned: return Assembler::greaterEqualUnsigned; case Assembler::negative: return Assembler::positive; case Assembler::overflowSet: return Assembler::overflowClear; case Assembler::always: return Assembler::never; case Assembler::notZero: return Assembler::zero; case Assembler::greater: return Assembler::lessEqual; case Assembler::greaterEqual: return Assembler::less; case Assembler::greaterUnsigned: return Assembler::lessEqualUnsigned; case Assembler::greaterEqualUnsigned: return Assembler::lessUnsigned; case Assembler::positive: return Assembler::negative; case Assembler::overflowClear: return Assembler::overflowSet; } ShouldNotReachHere(); return Assembler::overflowClear; } void MacroAssembler::cond_inc(Assembler::Condition cond, address counter_ptr, Register Rtmp1, Register Rtmp2 /*, Register Rtmp3, Register Rtmp4 */) { Condition negated_cond = negate_condition(cond); Label L; brx(negated_cond, false, Assembler::pt, L); delayed()->nop(); inc_counter(counter_ptr, Rtmp1, Rtmp2); bind(L); } void MacroAssembler::inc_counter(address counter_addr, Register Rtmp1, Register Rtmp2) { AddressLiteral addrlit(counter_addr); sethi(addrlit, Rtmp1); // Move hi22 bits into temporary register. Address addr(Rtmp1, addrlit.low10()); // Build an address with low10 bits. ld(addr, Rtmp2); inc(Rtmp2); st(Rtmp2, addr); } void MacroAssembler::inc_counter(int* counter_addr, Register Rtmp1, Register Rtmp2) { inc_counter((address) counter_addr, Rtmp1, Rtmp2); } SkipIfEqual::SkipIfEqual( MacroAssembler* masm, Register temp, const bool* flag_addr, Assembler::Condition condition) { _masm = masm; AddressLiteral flag(flag_addr); _masm->sethi(flag, temp); _masm->ldub(temp, flag.low10(), temp); _masm->tst(temp); _masm->br(condition, false, Assembler::pt, _label); _masm->delayed()->nop(); } SkipIfEqual::~SkipIfEqual() { _masm->bind(_label); } // Writes to stack successive pages until offset reached to check for // stack overflow + shadow pages. This clobbers tsp and scratch. void MacroAssembler::bang_stack_size(Register Rsize, Register Rtsp, Register Rscratch) { // Use stack pointer in temp stack pointer mov(SP, Rtsp); // Bang stack for total size given plus stack shadow page size. // Bang one page at a time because a large size can overflow yellow and // red zones (the bang will fail but stack overflow handling can't tell that // it was a stack overflow bang vs a regular segv). int offset = os::vm_page_size(); Register Roffset = Rscratch; Label loop; bind(loop); set((-offset)+STACK_BIAS, Rscratch); st(G0, Rtsp, Rscratch); set(offset, Roffset); sub(Rsize, Roffset, Rsize); cmp(Rsize, G0); br(Assembler::greater, false, Assembler::pn, loop); delayed()->sub(Rtsp, Roffset, Rtsp); // Bang down shadow pages too. // The -1 because we already subtracted 1 page. for (int i = 0; i< StackShadowPages-1; i++) { set((-i*offset)+STACK_BIAS, Rscratch); st(G0, Rtsp, Rscratch); } } /////////////////////////////////////////////////////////////////////////////////// #ifndef SERIALGC static uint num_stores = 0; static uint num_null_pre_stores = 0; static void count_null_pre_vals(void* pre_val) { num_stores++; if (pre_val == NULL) num_null_pre_stores++; if ((num_stores % 1000000) == 0) { tty->print_cr(UINT32_FORMAT " stores, " UINT32_FORMAT " (%5.2f%%) with null pre-vals.", num_stores, num_null_pre_stores, 100.0*(float)num_null_pre_stores/(float)num_stores); } } static address satb_log_enqueue_with_frame = 0; static u_char* satb_log_enqueue_with_frame_end = 0; static address satb_log_enqueue_frameless = 0; static u_char* satb_log_enqueue_frameless_end = 0; static int EnqueueCodeSize = 128 DEBUG_ONLY( + 256); // Instructions? // The calls to this don't work. We'd need to do a fair amount of work to // make it work. static void check_index(int ind) { assert(0 <= ind && ind <= 64*K && ((ind % oopSize) == 0), "Invariants.") } static void generate_satb_log_enqueue(bool with_frame) { BufferBlob* bb = BufferBlob::create("enqueue_with_frame", EnqueueCodeSize); CodeBuffer buf(bb->instructions_begin(), bb->instructions_size()); MacroAssembler masm(&buf); address start = masm.pc(); Register pre_val; Label refill, restart; if (with_frame) { masm.save_frame(0); pre_val = I0; // Was O0 before the save. } else { pre_val = O0; } int satb_q_index_byte_offset = in_bytes(JavaThread::satb_mark_queue_offset() + PtrQueue::byte_offset_of_index()); int satb_q_buf_byte_offset = in_bytes(JavaThread::satb_mark_queue_offset() + PtrQueue::byte_offset_of_buf()); assert(in_bytes(PtrQueue::byte_width_of_index()) == sizeof(intptr_t) && in_bytes(PtrQueue::byte_width_of_buf()) == sizeof(intptr_t), "check sizes in assembly below"); masm.bind(restart); masm.ld_ptr(G2_thread, satb_q_index_byte_offset, L0); masm.br_on_reg_cond(Assembler::rc_z, /*annul*/false, Assembler::pn, L0, refill); // If the branch is taken, no harm in executing this in the delay slot. masm.delayed()->ld_ptr(G2_thread, satb_q_buf_byte_offset, L1); masm.sub(L0, oopSize, L0); masm.st_ptr(pre_val, L1, L0); // [_buf + index] := I0 if (!with_frame) { // Use return-from-leaf masm.retl(); masm.delayed()->st_ptr(L0, G2_thread, satb_q_index_byte_offset); } else { // Not delayed. masm.st_ptr(L0, G2_thread, satb_q_index_byte_offset); } if (with_frame) { masm.ret(); masm.delayed()->restore(); } masm.bind(refill); address handle_zero = CAST_FROM_FN_PTR(address, &SATBMarkQueueSet::handle_zero_index_for_thread); // This should be rare enough that we can afford to save all the // scratch registers that the calling context might be using. masm.mov(G1_scratch, L0); masm.mov(G3_scratch, L1); masm.mov(G4, L2); // We need the value of O0 above (for the write into the buffer), so we // save and restore it. masm.mov(O0, L3); // Since the call will overwrite O7, we save and restore that, as well. masm.mov(O7, L4); masm.call_VM_leaf(L5, handle_zero, G2_thread); masm.mov(L0, G1_scratch); masm.mov(L1, G3_scratch); masm.mov(L2, G4); masm.mov(L3, O0); masm.br(Assembler::always, /*annul*/false, Assembler::pt, restart); masm.delayed()->mov(L4, O7); if (with_frame) { satb_log_enqueue_with_frame = start; satb_log_enqueue_with_frame_end = masm.pc(); } else { satb_log_enqueue_frameless = start; satb_log_enqueue_frameless_end = masm.pc(); } } static inline void generate_satb_log_enqueue_if_necessary(bool with_frame) { if (with_frame) { if (satb_log_enqueue_with_frame == 0) { generate_satb_log_enqueue(with_frame); assert(satb_log_enqueue_with_frame != 0, "postcondition."); if (G1SATBPrintStubs) { tty->print_cr("Generated with-frame satb enqueue:"); Disassembler::decode((u_char*)satb_log_enqueue_with_frame, satb_log_enqueue_with_frame_end, tty); } } } else { if (satb_log_enqueue_frameless == 0) { generate_satb_log_enqueue(with_frame); assert(satb_log_enqueue_frameless != 0, "postcondition."); if (G1SATBPrintStubs) { tty->print_cr("Generated frameless satb enqueue:"); Disassembler::decode((u_char*)satb_log_enqueue_frameless, satb_log_enqueue_frameless_end, tty); } } } } void MacroAssembler::g1_write_barrier_pre(Register obj, Register index, int offset, Register tmp, bool preserve_o_regs) { assert(offset == 0 || index == noreg, "choose one"); if (G1DisablePreBarrier) return; // satb_log_barrier(tmp, obj, offset, preserve_o_regs); Label filtered; // satb_log_barrier_work0(tmp, filtered); if (in_bytes(PtrQueue::byte_width_of_active()) == 4) { ld(G2, in_bytes(JavaThread::satb_mark_queue_offset() + PtrQueue::byte_offset_of_active()), tmp); } else { guarantee(in_bytes(PtrQueue::byte_width_of_active()) == 1, "Assumption"); ldsb(G2, in_bytes(JavaThread::satb_mark_queue_offset() + PtrQueue::byte_offset_of_active()), tmp); } // Check on whether to annul. br_on_reg_cond(rc_z, /*annul*/false, Assembler::pt, tmp, filtered); delayed() -> nop(); // satb_log_barrier_work1(tmp, offset); if (index == noreg) { if (Assembler::is_simm13(offset)) { load_heap_oop(obj, offset, tmp); } else { set(offset, tmp); load_heap_oop(obj, tmp, tmp); } } else { load_heap_oop(obj, index, tmp); } // satb_log_barrier_work2(obj, tmp, offset); // satb_log_barrier_work3(tmp, filtered, preserve_o_regs); const Register pre_val = tmp; if (G1SATBBarrierPrintNullPreVals) { save_frame(0); mov(pre_val, O0); // Save G-regs that target may use. mov(G1, L1); mov(G2, L2); mov(G3, L3); mov(G4, L4); mov(G5, L5); call(CAST_FROM_FN_PTR(address, &count_null_pre_vals)); delayed()->nop(); // Restore G-regs that target may have used. mov(L1, G1); mov(L2, G2); mov(L3, G3); mov(L4, G4); mov(L5, G5); restore(G0, G0, G0); } // Check on whether to annul. br_on_reg_cond(rc_z, /*annul*/false, Assembler::pt, pre_val, filtered); delayed() -> nop(); // OK, it's not filtered, so we'll need to call enqueue. In the normal // case, pre_val will be a scratch G-reg, but there's some cases in which // it's an O-reg. In the first case, do a normal call. In the latter, // do a save here and call the frameless version. guarantee(pre_val->is_global() || pre_val->is_out(), "Or we need to think harder."); if (pre_val->is_global() && !preserve_o_regs) { generate_satb_log_enqueue_if_necessary(true); // with frame. call(satb_log_enqueue_with_frame); delayed()->mov(pre_val, O0); } else { generate_satb_log_enqueue_if_necessary(false); // with frameless. save_frame(0); call(satb_log_enqueue_frameless); delayed()->mov(pre_val->after_save(), O0); restore(); } bind(filtered); } static jint num_ct_writes = 0; static jint num_ct_writes_filtered_in_hr = 0; static jint num_ct_writes_filtered_null = 0; static G1CollectedHeap* g1 = NULL; static Thread* count_ct_writes(void* filter_val, void* new_val) { Atomic::inc(&num_ct_writes); if (filter_val == NULL) { Atomic::inc(&num_ct_writes_filtered_in_hr); } else if (new_val == NULL) { Atomic::inc(&num_ct_writes_filtered_null); } else { if (g1 == NULL) { g1 = G1CollectedHeap::heap(); } } if ((num_ct_writes % 1000000) == 0) { jint num_ct_writes_filtered = num_ct_writes_filtered_in_hr + num_ct_writes_filtered_null; tty->print_cr("%d potential CT writes: %5.2f%% filtered\n" " (%5.2f%% intra-HR, %5.2f%% null).", num_ct_writes, 100.0*(float)num_ct_writes_filtered/(float)num_ct_writes, 100.0*(float)num_ct_writes_filtered_in_hr/ (float)num_ct_writes, 100.0*(float)num_ct_writes_filtered_null/ (float)num_ct_writes); } return Thread::current(); } static address dirty_card_log_enqueue = 0; static u_char* dirty_card_log_enqueue_end = 0; // This gets to assume that o0 contains the object address. static void generate_dirty_card_log_enqueue(jbyte* byte_map_base) { BufferBlob* bb = BufferBlob::create("dirty_card_enqueue", EnqueueCodeSize*2); CodeBuffer buf(bb->instructions_begin(), bb->instructions_size()); MacroAssembler masm(&buf); address start = masm.pc(); Label not_already_dirty, restart, refill; #ifdef _LP64 masm.srlx(O0, CardTableModRefBS::card_shift, O0); #else masm.srl(O0, CardTableModRefBS::card_shift, O0); #endif AddressLiteral addrlit(byte_map_base); masm.set(addrlit, O1); // O1 := masm.ldub(O0, O1, O2); // O2 := [O0 + O1] masm.br_on_reg_cond(Assembler::rc_nz, /*annul*/false, Assembler::pt, O2, not_already_dirty); // Get O1 + O2 into a reg by itself -- useful in the take-the-branch // case, harmless if not. masm.delayed()->add(O0, O1, O3); // We didn't take the branch, so we're already dirty: return. // Use return-from-leaf masm.retl(); masm.delayed()->nop(); // Not dirty. masm.bind(not_already_dirty); // First, dirty it. masm.stb(G0, O3, G0); // [cardPtr] := 0 (i.e., dirty). int dirty_card_q_index_byte_offset = in_bytes(JavaThread::dirty_card_queue_offset() + PtrQueue::byte_offset_of_index()); int dirty_card_q_buf_byte_offset = in_bytes(JavaThread::dirty_card_queue_offset() + PtrQueue::byte_offset_of_buf()); masm.bind(restart); masm.ld_ptr(G2_thread, dirty_card_q_index_byte_offset, L0); masm.br_on_reg_cond(Assembler::rc_z, /*annul*/false, Assembler::pn, L0, refill); // If the branch is taken, no harm in executing this in the delay slot. masm.delayed()->ld_ptr(G2_thread, dirty_card_q_buf_byte_offset, L1); masm.sub(L0, oopSize, L0); masm.st_ptr(O3, L1, L0); // [_buf + index] := I0 // Use return-from-leaf masm.retl(); masm.delayed()->st_ptr(L0, G2_thread, dirty_card_q_index_byte_offset); masm.bind(refill); address handle_zero = CAST_FROM_FN_PTR(address, &DirtyCardQueueSet::handle_zero_index_for_thread); // This should be rare enough that we can afford to save all the // scratch registers that the calling context might be using. masm.mov(G1_scratch, L3); masm.mov(G3_scratch, L5); // We need the value of O3 above (for the write into the buffer), so we // save and restore it. masm.mov(O3, L6); // Since the call will overwrite O7, we save and restore that, as well. masm.mov(O7, L4); masm.call_VM_leaf(L7_thread_cache, handle_zero, G2_thread); masm.mov(L3, G1_scratch); masm.mov(L5, G3_scratch); masm.mov(L6, O3); masm.br(Assembler::always, /*annul*/false, Assembler::pt, restart); masm.delayed()->mov(L4, O7); dirty_card_log_enqueue = start; dirty_card_log_enqueue_end = masm.pc(); // XXX Should have a guarantee here about not going off the end! // Does it already do so? Do an experiment... } static inline void generate_dirty_card_log_enqueue_if_necessary(jbyte* byte_map_base) { if (dirty_card_log_enqueue == 0) { generate_dirty_card_log_enqueue(byte_map_base); assert(dirty_card_log_enqueue != 0, "postcondition."); if (G1SATBPrintStubs) { tty->print_cr("Generated dirty_card enqueue:"); Disassembler::decode((u_char*)dirty_card_log_enqueue, dirty_card_log_enqueue_end, tty); } } } void MacroAssembler::g1_write_barrier_post(Register store_addr, Register new_val, Register tmp) { Label filtered; MacroAssembler* post_filter_masm = this; if (new_val == G0) return; if (G1DisablePostBarrier) return; G1SATBCardTableModRefBS* bs = (G1SATBCardTableModRefBS*) Universe::heap()->barrier_set(); assert(bs->kind() == BarrierSet::G1SATBCT || bs->kind() == BarrierSet::G1SATBCTLogging, "wrong barrier"); if (G1RSBarrierRegionFilter) { xor3(store_addr, new_val, tmp); #ifdef _LP64 srlx(tmp, HeapRegion::LogOfHRGrainBytes, tmp); #else srl(tmp, HeapRegion::LogOfHRGrainBytes, tmp); #endif if (G1PrintCTFilterStats) { guarantee(tmp->is_global(), "Or stats won't work..."); // This is a sleazy hack: I'm temporarily hijacking G2, which I // promise to restore. mov(new_val, G2); save_frame(0); mov(tmp, O0); mov(G2, O1); // Save G-regs that target may use. mov(G1, L1); mov(G2, L2); mov(G3, L3); mov(G4, L4); mov(G5, L5); call(CAST_FROM_FN_PTR(address, &count_ct_writes)); delayed()->nop(); mov(O0, G2); // Restore G-regs that target may have used. mov(L1, G1); mov(L3, G3); mov(L4, G4); mov(L5, G5); restore(G0, G0, G0); } // XXX Should I predict this taken or not? Does it mattern? br_on_reg_cond(rc_z, /*annul*/false, Assembler::pt, tmp, filtered); delayed()->nop(); } // If the "store_addr" register is an "in" or "local" register, move it to // a scratch reg so we can pass it as an argument. bool use_scr = !(store_addr->is_global() || store_addr->is_out()); // Pick a scratch register different from "tmp". Register scr = (tmp == G1_scratch ? G3_scratch : G1_scratch); // Make sure we use up the delay slot! if (use_scr) { post_filter_masm->mov(store_addr, scr); } else { post_filter_masm->nop(); } generate_dirty_card_log_enqueue_if_necessary(bs->byte_map_base); save_frame(0); call(dirty_card_log_enqueue); if (use_scr) { delayed()->mov(scr, O0); } else { delayed()->mov(store_addr->after_save(), O0); } restore(); bind(filtered); } #endif // SERIALGC /////////////////////////////////////////////////////////////////////////////////// void MacroAssembler::card_write_barrier_post(Register store_addr, Register new_val, Register tmp) { // If we're writing constant NULL, we can skip the write barrier. if (new_val == G0) return; CardTableModRefBS* bs = (CardTableModRefBS*) Universe::heap()->barrier_set(); assert(bs->kind() == BarrierSet::CardTableModRef || bs->kind() == BarrierSet::CardTableExtension, "wrong barrier"); card_table_write(bs->byte_map_base, tmp, store_addr); } void MacroAssembler::load_klass(Register src_oop, Register klass) { // The number of bytes in this code is used by // MachCallDynamicJavaNode::ret_addr_offset() // if this changes, change that. if (UseCompressedOops) { lduw(src_oop, oopDesc::klass_offset_in_bytes(), klass); decode_heap_oop_not_null(klass); } else { ld_ptr(src_oop, oopDesc::klass_offset_in_bytes(), klass); } } void MacroAssembler::store_klass(Register klass, Register dst_oop) { if (UseCompressedOops) { assert(dst_oop != klass, "not enough registers"); encode_heap_oop_not_null(klass); st(klass, dst_oop, oopDesc::klass_offset_in_bytes()); } else { st_ptr(klass, dst_oop, oopDesc::klass_offset_in_bytes()); } } void MacroAssembler::store_klass_gap(Register s, Register d) { if (UseCompressedOops) { assert(s != d, "not enough registers"); st(s, d, oopDesc::klass_gap_offset_in_bytes()); } } void MacroAssembler::load_heap_oop(const Address& s, Register d) { if (UseCompressedOops) { lduw(s, d); decode_heap_oop(d); } else { ld_ptr(s, d); } } void MacroAssembler::load_heap_oop(Register s1, Register s2, Register d) { if (UseCompressedOops) { lduw(s1, s2, d); decode_heap_oop(d, d); } else { ld_ptr(s1, s2, d); } } void MacroAssembler::load_heap_oop(Register s1, int simm13a, Register d) { if (UseCompressedOops) { lduw(s1, simm13a, d); decode_heap_oop(d, d); } else { ld_ptr(s1, simm13a, d); } } void MacroAssembler::store_heap_oop(Register d, Register s1, Register s2) { if (UseCompressedOops) { assert(s1 != d && s2 != d, "not enough registers"); encode_heap_oop(d); st(d, s1, s2); } else { st_ptr(d, s1, s2); } } void MacroAssembler::store_heap_oop(Register d, Register s1, int simm13a) { if (UseCompressedOops) { assert(s1 != d, "not enough registers"); encode_heap_oop(d); st(d, s1, simm13a); } else { st_ptr(d, s1, simm13a); } } void MacroAssembler::store_heap_oop(Register d, const Address& a, int offset) { if (UseCompressedOops) { assert(a.base() != d, "not enough registers"); encode_heap_oop(d); st(d, a, offset); } else { st_ptr(d, a, offset); } } void MacroAssembler::encode_heap_oop(Register src, Register dst) { assert (UseCompressedOops, "must be compressed"); assert (Universe::heap() != NULL, "java heap should be initialized"); assert (LogMinObjAlignmentInBytes == Universe::narrow_oop_shift(), "decode alg wrong"); verify_oop(src); if (Universe::narrow_oop_base() == NULL) { srlx(src, LogMinObjAlignmentInBytes, dst); return; } Label done; if (src == dst) { // optimize for frequent case src == dst bpr(rc_nz, true, Assembler::pt, src, done); delayed() -> sub(src, G6_heapbase, dst); // annuled if not taken bind(done); srlx(src, LogMinObjAlignmentInBytes, dst); } else { bpr(rc_z, false, Assembler::pn, src, done); delayed() -> mov(G0, dst); // could be moved before branch, and annulate delay, // but may add some unneeded work decoding null sub(src, G6_heapbase, dst); srlx(dst, LogMinObjAlignmentInBytes, dst); bind(done); } } void MacroAssembler::encode_heap_oop_not_null(Register r) { assert (UseCompressedOops, "must be compressed"); assert (Universe::heap() != NULL, "java heap should be initialized"); assert (LogMinObjAlignmentInBytes == Universe::narrow_oop_shift(), "decode alg wrong"); verify_oop(r); if (Universe::narrow_oop_base() != NULL) sub(r, G6_heapbase, r); srlx(r, LogMinObjAlignmentInBytes, r); } void MacroAssembler::encode_heap_oop_not_null(Register src, Register dst) { assert (UseCompressedOops, "must be compressed"); assert (Universe::heap() != NULL, "java heap should be initialized"); assert (LogMinObjAlignmentInBytes == Universe::narrow_oop_shift(), "decode alg wrong"); verify_oop(src); if (Universe::narrow_oop_base() == NULL) { srlx(src, LogMinObjAlignmentInBytes, dst); } else { sub(src, G6_heapbase, dst); srlx(dst, LogMinObjAlignmentInBytes, dst); } } // Same algorithm as oops.inline.hpp decode_heap_oop. void MacroAssembler::decode_heap_oop(Register src, Register dst) { assert (UseCompressedOops, "must be compressed"); assert (Universe::heap() != NULL, "java heap should be initialized"); assert (LogMinObjAlignmentInBytes == Universe::narrow_oop_shift(), "decode alg wrong"); sllx(src, LogMinObjAlignmentInBytes, dst); if (Universe::narrow_oop_base() != NULL) { Label done; bpr(rc_nz, true, Assembler::pt, dst, done); delayed() -> add(dst, G6_heapbase, dst); // annuled if not taken bind(done); } verify_oop(dst); } void MacroAssembler::decode_heap_oop_not_null(Register r) { // Do not add assert code to this unless you change vtableStubs_sparc.cpp // pd_code_size_limit. // Also do not verify_oop as this is called by verify_oop. assert (UseCompressedOops, "must be compressed"); assert (Universe::heap() != NULL, "java heap should be initialized"); assert (LogMinObjAlignmentInBytes == Universe::narrow_oop_shift(), "decode alg wrong"); sllx(r, LogMinObjAlignmentInBytes, r); if (Universe::narrow_oop_base() != NULL) add(r, G6_heapbase, r); } void MacroAssembler::decode_heap_oop_not_null(Register src, Register dst) { // Do not add assert code to this unless you change vtableStubs_sparc.cpp // pd_code_size_limit. // Also do not verify_oop as this is called by verify_oop. assert (UseCompressedOops, "must be compressed"); assert (Universe::heap() != NULL, "java heap should be initialized"); assert (LogMinObjAlignmentInBytes == Universe::narrow_oop_shift(), "decode alg wrong"); sllx(src, LogMinObjAlignmentInBytes, dst); if (Universe::narrow_oop_base() != NULL) add(dst, G6_heapbase, dst); } void MacroAssembler::reinit_heapbase() { if (UseCompressedOops) { // call indirectly to solve generation ordering problem AddressLiteral base(Universe::narrow_oop_base_addr()); load_ptr_contents(base, G6_heapbase); } } // Compare char[] arrays aligned to 4 bytes. void MacroAssembler::char_arrays_equals(Register ary1, Register ary2, Register limit, Register result, Register chr1, Register chr2, Label& Ldone) { Label Lvector, Lloop; assert(chr1 == result, "should be the same"); // Note: limit contains number of bytes (2*char_elements) != 0. andcc(limit, 0x2, chr1); // trailing character ? br(Assembler::zero, false, Assembler::pt, Lvector); delayed()->nop(); // compare the trailing char sub(limit, sizeof(jchar), limit); lduh(ary1, limit, chr1); lduh(ary2, limit, chr2); cmp(chr1, chr2); br(Assembler::notEqual, true, Assembler::pt, Ldone); delayed()->mov(G0, result); // not equal // only one char ? br_on_reg_cond(rc_z, true, Assembler::pn, limit, Ldone); delayed()->add(G0, 1, result); // zero-length arrays are equal // word by word compare, dont't need alignment check bind(Lvector); // Shift ary1 and ary2 to the end of the arrays, negate limit add(ary1, limit, ary1); add(ary2, limit, ary2); neg(limit, limit); lduw(ary1, limit, chr1); bind(Lloop); lduw(ary2, limit, chr2); cmp(chr1, chr2); br(Assembler::notEqual, true, Assembler::pt, Ldone); delayed()->mov(G0, result); // not equal inccc(limit, 2*sizeof(jchar)); // annul LDUW if branch is not taken to prevent access past end of array br(Assembler::notZero, true, Assembler::pt, Lloop); delayed()->lduw(ary1, limit, chr1); // hoisted // Caller should set it: // add(G0, 1, result); // equals }