Print this page
rev 1021 : 6858164: invokedynamic code needs some cleanup (post-6655638)
Note: The bug ID for this change set was erroneously used to call for review of 6815692.
Summary: Fix several crashers, remove needless paths for boxed-style bootstrap method call, refactor & simplify APIs for rewriter constantPoolOop, remove sun.dyn.CallSiteImpl
Reviewed-by: ?
rev 1024 : imported patch indy-cleanup-6893081.patch
Split |
Close |
Expand all |
Collapse all |
--- old/src/cpu/x86/vm/templateInterpreter_x86_32.cpp
+++ new/src/cpu/x86/vm/templateInterpreter_x86_32.cpp
1 1 /*
2 2 * Copyright 1997-2009 Sun Microsystems, Inc. All Rights Reserved.
3 3 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
4 4 *
5 5 * This code is free software; you can redistribute it and/or modify it
6 6 * under the terms of the GNU General Public License version 2 only, as
7 7 * published by the Free Software Foundation.
8 8 *
9 9 * This code is distributed in the hope that it will be useful, but WITHOUT
10 10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
12 12 * version 2 for more details (a copy is included in the LICENSE file that
13 13 * accompanied this code).
14 14 *
15 15 * You should have received a copy of the GNU General Public License version
16 16 * 2 along with this work; if not, write to the Free Software Foundation,
17 17 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
18 18 *
19 19 * Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara,
20 20 * CA 95054 USA or visit www.sun.com if you need additional information or
21 21 * have any questions.
22 22 *
23 23 */
24 24
25 25 #include "incls/_precompiled.incl"
26 26 #include "incls/_templateInterpreter_x86_32.cpp.incl"
27 27
28 28 #define __ _masm->
29 29
30 30
31 31 #ifndef CC_INTERP
32 32 const int method_offset = frame::interpreter_frame_method_offset * wordSize;
33 33 const int bci_offset = frame::interpreter_frame_bcx_offset * wordSize;
34 34 const int locals_offset = frame::interpreter_frame_locals_offset * wordSize;
35 35
36 36 //------------------------------------------------------------------------------------------------------------------------
37 37
38 38 address TemplateInterpreterGenerator::generate_StackOverflowError_handler() {
39 39 address entry = __ pc();
40 40
41 41 // Note: There should be a minimal interpreter frame set up when stack
42 42 // overflow occurs since we check explicitly for it now.
43 43 //
44 44 #ifdef ASSERT
45 45 { Label L;
46 46 __ lea(rax, Address(rbp,
47 47 frame::interpreter_frame_monitor_block_top_offset * wordSize));
48 48 __ cmpptr(rax, rsp); // rax, = maximal rsp for current rbp,
49 49 // (stack grows negative)
50 50 __ jcc(Assembler::aboveEqual, L); // check if frame is complete
51 51 __ stop ("interpreter frame not set up");
52 52 __ bind(L);
53 53 }
54 54 #endif // ASSERT
55 55 // Restore bcp under the assumption that the current frame is still
56 56 // interpreted
57 57 __ restore_bcp();
58 58
59 59 // expression stack must be empty before entering the VM if an exception
60 60 // happened
61 61 __ empty_expression_stack();
62 62 __ empty_FPU_stack();
63 63 // throw exception
64 64 __ call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::throw_StackOverflowError));
65 65 return entry;
66 66 }
67 67
68 68 address TemplateInterpreterGenerator::generate_ArrayIndexOutOfBounds_handler(const char* name) {
69 69 address entry = __ pc();
70 70 // expression stack must be empty before entering the VM if an exception happened
71 71 __ empty_expression_stack();
72 72 __ empty_FPU_stack();
73 73 // setup parameters
74 74 // ??? convention: expect aberrant index in register rbx,
75 75 __ lea(rax, ExternalAddress((address)name));
76 76 __ call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::throw_ArrayIndexOutOfBoundsException), rax, rbx);
77 77 return entry;
78 78 }
79 79
80 80 address TemplateInterpreterGenerator::generate_ClassCastException_handler() {
81 81 address entry = __ pc();
82 82 // object is at TOS
83 83 __ pop(rax);
84 84 // expression stack must be empty before entering the VM if an exception
85 85 // happened
86 86 __ empty_expression_stack();
87 87 __ empty_FPU_stack();
88 88 __ call_VM(noreg,
89 89 CAST_FROM_FN_PTR(address,
90 90 InterpreterRuntime::throw_ClassCastException),
91 91 rax);
92 92 return entry;
93 93 }
94 94
95 95 // Arguments are: required type at TOS+4, failing object (or NULL) at TOS.
96 96 address TemplateInterpreterGenerator::generate_WrongMethodType_handler() {
97 97 address entry = __ pc();
98 98
99 99 __ pop(rbx); // actual failing object is at TOS
100 100 __ pop(rax); // required type is at TOS+4
101 101
102 102 __ verify_oop(rbx);
103 103 __ verify_oop(rax);
104 104
105 105 // Various method handle types use interpreter registers as temps.
106 106 __ restore_bcp();
107 107 __ restore_locals();
108 108
109 109 // Expression stack must be empty before entering the VM for an exception.
110 110 __ empty_expression_stack();
111 111 __ empty_FPU_stack();
112 112 __ call_VM(noreg,
113 113 CAST_FROM_FN_PTR(address,
114 114 InterpreterRuntime::throw_WrongMethodTypeException),
115 115 // pass required type, failing object (or NULL)
116 116 rax, rbx);
117 117 return entry;
118 118 }
119 119
120 120
121 121 address TemplateInterpreterGenerator::generate_exception_handler_common(const char* name, const char* message, bool pass_oop) {
122 122 assert(!pass_oop || message == NULL, "either oop or message but not both");
123 123 address entry = __ pc();
124 124 if (pass_oop) {
125 125 // object is at TOS
126 126 __ pop(rbx);
127 127 }
128 128 // expression stack must be empty before entering the VM if an exception happened
129 129 __ empty_expression_stack();
130 130 __ empty_FPU_stack();
131 131 // setup parameters
132 132 __ lea(rax, ExternalAddress((address)name));
133 133 if (pass_oop) {
134 134 __ call_VM(rax, CAST_FROM_FN_PTR(address, InterpreterRuntime::create_klass_exception), rax, rbx);
135 135 } else {
136 136 if (message != NULL) {
137 137 __ lea(rbx, ExternalAddress((address)message));
138 138 } else {
139 139 __ movptr(rbx, NULL_WORD);
140 140 }
141 141 __ call_VM(rax, CAST_FROM_FN_PTR(address, InterpreterRuntime::create_exception), rax, rbx);
142 142 }
143 143 // throw exception
144 144 __ jump(ExternalAddress(Interpreter::throw_exception_entry()));
145 145 return entry;
146 146 }
147 147
148 148
149 149 address TemplateInterpreterGenerator::generate_continuation_for(TosState state) {
150 150 address entry = __ pc();
151 151 // NULL last_sp until next java call
152 152 __ movptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), NULL_WORD);
153 153 __ dispatch_next(state);
154 154 return entry;
155 155 }
156 156
157 157
158 158 address TemplateInterpreterGenerator::generate_return_entry_for(TosState state, int step) {
159 159 TosState incoming_state = state;
160 160
161 161 Label interpreter_entry;
162 162 address compiled_entry = __ pc();
163 163
164 164 #ifdef COMPILER2
165 165 // The FPU stack is clean if UseSSE >= 2 but must be cleaned in other cases
166 166 if ((incoming_state == ftos && UseSSE < 1) || (incoming_state == dtos && UseSSE < 2)) {
167 167 for (int i = 1; i < 8; i++) {
168 168 __ ffree(i);
169 169 }
170 170 } else if (UseSSE < 2) {
171 171 __ empty_FPU_stack();
172 172 }
173 173 #endif
174 174 if ((incoming_state == ftos && UseSSE < 1) || (incoming_state == dtos && UseSSE < 2)) {
175 175 __ MacroAssembler::verify_FPU(1, "generate_return_entry_for compiled");
176 176 } else {
177 177 __ MacroAssembler::verify_FPU(0, "generate_return_entry_for compiled");
178 178 }
179 179
180 180 __ jmp(interpreter_entry, relocInfo::none);
181 181 // emit a sentinel we can test for when converting an interpreter
182 182 // entry point to a compiled entry point.
183 183 __ a_long(Interpreter::return_sentinel);
184 184 __ a_long((int)compiled_entry);
185 185 address entry = __ pc();
186 186 __ bind(interpreter_entry);
187 187
188 188 // In SSE mode, interpreter returns FP results in xmm0 but they need
189 189 // to end up back on the FPU so it can operate on them.
190 190 if (incoming_state == ftos && UseSSE >= 1) {
191 191 __ subptr(rsp, wordSize);
192 192 __ movflt(Address(rsp, 0), xmm0);
193 193 __ fld_s(Address(rsp, 0));
194 194 __ addptr(rsp, wordSize);
195 195 } else if (incoming_state == dtos && UseSSE >= 2) {
196 196 __ subptr(rsp, 2*wordSize);
197 197 __ movdbl(Address(rsp, 0), xmm0);
198 198 __ fld_d(Address(rsp, 0));
199 199 __ addptr(rsp, 2*wordSize);
200 200 }
201 201
202 202 __ MacroAssembler::verify_FPU(state == ftos || state == dtos ? 1 : 0, "generate_return_entry_for in interpreter");
203 203
204 204 // Restore stack bottom in case i2c adjusted stack
205 205 __ movptr(rsp, Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize));
206 206 // and NULL it as marker that rsp is now tos until next java call
207 207 __ movptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), NULL_WORD);
208 208
209 209 __ restore_bcp();
210 210 __ restore_locals();
211 211
212 212 Label L_got_cache, L_giant_index;
213 213 if (EnableInvokeDynamic) {
214 214 __ cmpb(Address(rsi, 0), Bytecodes::_invokedynamic);
215 215 __ jcc(Assembler::equal, L_giant_index);
216 216 }
217 217 __ get_cache_and_index_at_bcp(rbx, rcx, 1, false);
218 218 __ bind(L_got_cache);
219 219 __ movl(rbx, Address(rbx, rcx,
220 220 Address::times_ptr, constantPoolCacheOopDesc::base_offset() +
221 221 ConstantPoolCacheEntry::flags_offset()));
222 222 __ andptr(rbx, 0xFF);
223 223 __ lea(rsp, Address(rsp, rbx, Interpreter::stackElementScale()));
224 224 __ dispatch_next(state, step);
225 225
226 226 // out of the main line of code...
227 227 if (EnableInvokeDynamic) {
228 228 __ bind(L_giant_index);
229 229 __ get_cache_and_index_at_bcp(rbx, rcx, 1, true);
230 230 __ jmp(L_got_cache);
231 231 }
232 232
233 233 return entry;
234 234 }
235 235
236 236
237 237 address TemplateInterpreterGenerator::generate_deopt_entry_for(TosState state, int step) {
238 238 address entry = __ pc();
239 239
240 240 // In SSE mode, FP results are in xmm0
241 241 if (state == ftos && UseSSE > 0) {
242 242 __ subptr(rsp, wordSize);
243 243 __ movflt(Address(rsp, 0), xmm0);
244 244 __ fld_s(Address(rsp, 0));
245 245 __ addptr(rsp, wordSize);
246 246 } else if (state == dtos && UseSSE >= 2) {
247 247 __ subptr(rsp, 2*wordSize);
248 248 __ movdbl(Address(rsp, 0), xmm0);
249 249 __ fld_d(Address(rsp, 0));
250 250 __ addptr(rsp, 2*wordSize);
251 251 }
252 252
253 253 __ MacroAssembler::verify_FPU(state == ftos || state == dtos ? 1 : 0, "generate_deopt_entry_for in interpreter");
254 254
255 255 // The stack is not extended by deopt but we must NULL last_sp as this
256 256 // entry is like a "return".
257 257 __ movptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), NULL_WORD);
258 258 __ restore_bcp();
259 259 __ restore_locals();
260 260 // handle exceptions
261 261 { Label L;
262 262 const Register thread = rcx;
263 263 __ get_thread(thread);
264 264 __ cmpptr(Address(thread, Thread::pending_exception_offset()), (int32_t)NULL_WORD);
265 265 __ jcc(Assembler::zero, L);
266 266 __ call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::throw_pending_exception));
267 267 __ should_not_reach_here();
268 268 __ bind(L);
269 269 }
270 270 __ dispatch_next(state, step);
271 271 return entry;
272 272 }
273 273
274 274
275 275 int AbstractInterpreter::BasicType_as_index(BasicType type) {
276 276 int i = 0;
277 277 switch (type) {
278 278 case T_BOOLEAN: i = 0; break;
279 279 case T_CHAR : i = 1; break;
280 280 case T_BYTE : i = 2; break;
281 281 case T_SHORT : i = 3; break;
282 282 case T_INT : // fall through
283 283 case T_LONG : // fall through
284 284 case T_VOID : i = 4; break;
285 285 case T_FLOAT : i = 5; break; // have to treat float and double separately for SSE
286 286 case T_DOUBLE : i = 6; break;
287 287 case T_OBJECT : // fall through
288 288 case T_ARRAY : i = 7; break;
289 289 default : ShouldNotReachHere();
290 290 }
291 291 assert(0 <= i && i < AbstractInterpreter::number_of_result_handlers, "index out of bounds");
292 292 return i;
293 293 }
294 294
295 295
296 296 address TemplateInterpreterGenerator::generate_result_handler_for(BasicType type) {
297 297 address entry = __ pc();
298 298 switch (type) {
299 299 case T_BOOLEAN: __ c2bool(rax); break;
300 300 case T_CHAR : __ andptr(rax, 0xFFFF); break;
301 301 case T_BYTE : __ sign_extend_byte (rax); break;
302 302 case T_SHORT : __ sign_extend_short(rax); break;
303 303 case T_INT : /* nothing to do */ break;
304 304 case T_DOUBLE :
305 305 case T_FLOAT :
306 306 { const Register t = InterpreterRuntime::SignatureHandlerGenerator::temp();
307 307 __ pop(t); // remove return address first
308 308 __ pop_dtos_to_rsp();
309 309 // Must return a result for interpreter or compiler. In SSE
310 310 // mode, results are returned in xmm0 and the FPU stack must
311 311 // be empty.
312 312 if (type == T_FLOAT && UseSSE >= 1) {
313 313 // Load ST0
314 314 __ fld_d(Address(rsp, 0));
315 315 // Store as float and empty fpu stack
316 316 __ fstp_s(Address(rsp, 0));
317 317 // and reload
318 318 __ movflt(xmm0, Address(rsp, 0));
319 319 } else if (type == T_DOUBLE && UseSSE >= 2 ) {
320 320 __ movdbl(xmm0, Address(rsp, 0));
321 321 } else {
322 322 // restore ST0
323 323 __ fld_d(Address(rsp, 0));
324 324 }
325 325 // and pop the temp
326 326 __ addptr(rsp, 2 * wordSize);
327 327 __ push(t); // restore return address
328 328 }
329 329 break;
330 330 case T_OBJECT :
331 331 // retrieve result from frame
332 332 __ movptr(rax, Address(rbp, frame::interpreter_frame_oop_temp_offset*wordSize));
333 333 // and verify it
334 334 __ verify_oop(rax);
335 335 break;
336 336 default : ShouldNotReachHere();
337 337 }
338 338 __ ret(0); // return from result handler
339 339 return entry;
340 340 }
341 341
342 342 address TemplateInterpreterGenerator::generate_safept_entry_for(TosState state, address runtime_entry) {
343 343 address entry = __ pc();
344 344 __ push(state);
345 345 __ call_VM(noreg, runtime_entry);
346 346 __ dispatch_via(vtos, Interpreter::_normal_table.table_for(vtos));
347 347 return entry;
348 348 }
349 349
350 350
351 351 // Helpers for commoning out cases in the various type of method entries.
352 352 //
353 353
354 354 // increment invocation count & check for overflow
355 355 //
356 356 // Note: checking for negative value instead of overflow
357 357 // so we have a 'sticky' overflow test
358 358 //
359 359 // rbx,: method
360 360 // rcx: invocation counter
361 361 //
362 362 void InterpreterGenerator::generate_counter_incr(Label* overflow, Label* profile_method, Label* profile_method_continue) {
363 363
364 364 const Address invocation_counter(rbx, methodOopDesc::invocation_counter_offset() + InvocationCounter::counter_offset());
365 365 const Address backedge_counter (rbx, methodOopDesc::backedge_counter_offset() + InvocationCounter::counter_offset());
366 366
367 367 if (ProfileInterpreter) { // %%% Merge this into methodDataOop
368 368 __ incrementl(Address(rbx,methodOopDesc::interpreter_invocation_counter_offset()));
369 369 }
370 370 // Update standard invocation counters
371 371 __ movl(rax, backedge_counter); // load backedge counter
372 372
373 373 __ incrementl(rcx, InvocationCounter::count_increment);
374 374 __ andl(rax, InvocationCounter::count_mask_value); // mask out the status bits
375 375
376 376 __ movl(invocation_counter, rcx); // save invocation count
377 377 __ addl(rcx, rax); // add both counters
378 378
379 379 // profile_method is non-null only for interpreted method so
380 380 // profile_method != NULL == !native_call
381 381 // BytecodeInterpreter only calls for native so code is elided.
382 382
383 383 if (ProfileInterpreter && profile_method != NULL) {
384 384 // Test to see if we should create a method data oop
385 385 __ cmp32(rcx,
386 386 ExternalAddress((address)&InvocationCounter::InterpreterProfileLimit));
387 387 __ jcc(Assembler::less, *profile_method_continue);
388 388
389 389 // if no method data exists, go to profile_method
390 390 __ test_method_data_pointer(rax, *profile_method);
391 391 }
392 392
393 393 __ cmp32(rcx,
394 394 ExternalAddress((address)&InvocationCounter::InterpreterInvocationLimit));
395 395 __ jcc(Assembler::aboveEqual, *overflow);
396 396
397 397 }
398 398
399 399 void InterpreterGenerator::generate_counter_overflow(Label* do_continue) {
400 400
401 401 // Asm interpreter on entry
402 402 // rdi - locals
403 403 // rsi - bcp
404 404 // rbx, - method
405 405 // rdx - cpool
406 406 // rbp, - interpreter frame
407 407
408 408 // C++ interpreter on entry
409 409 // rsi - new interpreter state pointer
410 410 // rbp - interpreter frame pointer
411 411 // rbx - method
412 412
413 413 // On return (i.e. jump to entry_point) [ back to invocation of interpreter ]
414 414 // rbx, - method
415 415 // rcx - rcvr (assuming there is one)
416 416 // top of stack return address of interpreter caller
417 417 // rsp - sender_sp
418 418
419 419 // C++ interpreter only
420 420 // rsi - previous interpreter state pointer
421 421
422 422 const Address size_of_parameters(rbx, methodOopDesc::size_of_parameters_offset());
423 423
424 424 // InterpreterRuntime::frequency_counter_overflow takes one argument
425 425 // indicating if the counter overflow occurs at a backwards branch (non-NULL bcp).
426 426 // The call returns the address of the verified entry point for the method or NULL
427 427 // if the compilation did not complete (either went background or bailed out).
428 428 __ movptr(rax, (intptr_t)false);
429 429 __ call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::frequency_counter_overflow), rax);
430 430
431 431 __ movptr(rbx, Address(rbp, method_offset)); // restore methodOop
432 432
433 433 // Preserve invariant that rsi/rdi contain bcp/locals of sender frame
434 434 // and jump to the interpreted entry.
435 435 __ jmp(*do_continue, relocInfo::none);
436 436
437 437 }
438 438
439 439 void InterpreterGenerator::generate_stack_overflow_check(void) {
440 440 // see if we've got enough room on the stack for locals plus overhead.
441 441 // the expression stack grows down incrementally, so the normal guard
442 442 // page mechanism will work for that.
443 443 //
444 444 // Registers live on entry:
445 445 //
446 446 // Asm interpreter
447 447 // rdx: number of additional locals this frame needs (what we must check)
448 448 // rbx,: methodOop
449 449
450 450 // destroyed on exit
451 451 // rax,
452 452
453 453 // NOTE: since the additional locals are also always pushed (wasn't obvious in
454 454 // generate_method_entry) so the guard should work for them too.
455 455 //
456 456
457 457 // monitor entry size: see picture of stack set (generate_method_entry) and frame_x86.hpp
458 458 const int entry_size = frame::interpreter_frame_monitor_size() * wordSize;
459 459
460 460 // total overhead size: entry_size + (saved rbp, thru expr stack bottom).
461 461 // be sure to change this if you add/subtract anything to/from the overhead area
462 462 const int overhead_size = -(frame::interpreter_frame_initial_sp_offset*wordSize) + entry_size;
463 463
464 464 const int page_size = os::vm_page_size();
465 465
466 466 Label after_frame_check;
467 467
468 468 // see if the frame is greater than one page in size. If so,
469 469 // then we need to verify there is enough stack space remaining
470 470 // for the additional locals.
471 471 __ cmpl(rdx, (page_size - overhead_size)/Interpreter::stackElementSize());
472 472 __ jcc(Assembler::belowEqual, after_frame_check);
473 473
474 474 // compute rsp as if this were going to be the last frame on
475 475 // the stack before the red zone
476 476
477 477 Label after_frame_check_pop;
478 478
479 479 __ push(rsi);
480 480
481 481 const Register thread = rsi;
482 482
483 483 __ get_thread(thread);
484 484
485 485 const Address stack_base(thread, Thread::stack_base_offset());
486 486 const Address stack_size(thread, Thread::stack_size_offset());
487 487
488 488 // locals + overhead, in bytes
489 489 __ lea(rax, Address(noreg, rdx, Interpreter::stackElementScale(), overhead_size));
490 490
491 491 #ifdef ASSERT
492 492 Label stack_base_okay, stack_size_okay;
493 493 // verify that thread stack base is non-zero
494 494 __ cmpptr(stack_base, (int32_t)NULL_WORD);
495 495 __ jcc(Assembler::notEqual, stack_base_okay);
496 496 __ stop("stack base is zero");
497 497 __ bind(stack_base_okay);
498 498 // verify that thread stack size is non-zero
499 499 __ cmpptr(stack_size, 0);
500 500 __ jcc(Assembler::notEqual, stack_size_okay);
501 501 __ stop("stack size is zero");
502 502 __ bind(stack_size_okay);
503 503 #endif
504 504
505 505 // Add stack base to locals and subtract stack size
506 506 __ addptr(rax, stack_base);
507 507 __ subptr(rax, stack_size);
508 508
509 509 // Use the maximum number of pages we might bang.
510 510 const int max_pages = StackShadowPages > (StackRedPages+StackYellowPages) ? StackShadowPages :
511 511 (StackRedPages+StackYellowPages);
512 512 __ addptr(rax, max_pages * page_size);
513 513
514 514 // check against the current stack bottom
515 515 __ cmpptr(rsp, rax);
516 516 __ jcc(Assembler::above, after_frame_check_pop);
517 517
518 518 __ pop(rsi); // get saved bcp / (c++ prev state ).
519 519
520 520 __ pop(rax); // get return address
521 521 __ jump(ExternalAddress(Interpreter::throw_StackOverflowError_entry()));
522 522
523 523 // all done with frame size check
524 524 __ bind(after_frame_check_pop);
525 525 __ pop(rsi);
526 526
527 527 __ bind(after_frame_check);
528 528 }
529 529
530 530 // Allocate monitor and lock method (asm interpreter)
531 531 // rbx, - methodOop
532 532 //
533 533 void InterpreterGenerator::lock_method(void) {
534 534 // synchronize method
535 535 const Address access_flags (rbx, methodOopDesc::access_flags_offset());
536 536 const Address monitor_block_top (rbp, frame::interpreter_frame_monitor_block_top_offset * wordSize);
537 537 const int entry_size = frame::interpreter_frame_monitor_size() * wordSize;
538 538
539 539 #ifdef ASSERT
540 540 { Label L;
541 541 __ movl(rax, access_flags);
542 542 __ testl(rax, JVM_ACC_SYNCHRONIZED);
543 543 __ jcc(Assembler::notZero, L);
544 544 __ stop("method doesn't need synchronization");
545 545 __ bind(L);
546 546 }
547 547 #endif // ASSERT
548 548 // get synchronization object
549 549 { Label done;
550 550 const int mirror_offset = klassOopDesc::klass_part_offset_in_bytes() + Klass::java_mirror_offset_in_bytes();
551 551 __ movl(rax, access_flags);
552 552 __ testl(rax, JVM_ACC_STATIC);
553 553 __ movptr(rax, Address(rdi, Interpreter::local_offset_in_bytes(0))); // get receiver (assume this is frequent case)
554 554 __ jcc(Assembler::zero, done);
555 555 __ movptr(rax, Address(rbx, methodOopDesc::constants_offset()));
556 556 __ movptr(rax, Address(rax, constantPoolOopDesc::pool_holder_offset_in_bytes()));
557 557 __ movptr(rax, Address(rax, mirror_offset));
558 558 __ bind(done);
559 559 }
560 560 // add space for monitor & lock
561 561 __ subptr(rsp, entry_size); // add space for a monitor entry
562 562 __ movptr(monitor_block_top, rsp); // set new monitor block top
563 563 __ movptr(Address(rsp, BasicObjectLock::obj_offset_in_bytes()), rax); // store object
564 564 __ mov(rdx, rsp); // object address
565 565 __ lock_object(rdx);
566 566 }
567 567
568 568 //
569 569 // Generate a fixed interpreter frame. This is identical setup for interpreted methods
570 570 // and for native methods hence the shared code.
571 571
572 572 void TemplateInterpreterGenerator::generate_fixed_frame(bool native_call) {
573 573 // initialize fixed part of activation frame
574 574 __ push(rax); // save return address
575 575 __ enter(); // save old & set new rbp,
576 576
577 577
578 578 __ push(rsi); // set sender sp
579 579 __ push((int32_t)NULL_WORD); // leave last_sp as null
580 580 __ movptr(rsi, Address(rbx,methodOopDesc::const_offset())); // get constMethodOop
581 581 __ lea(rsi, Address(rsi,constMethodOopDesc::codes_offset())); // get codebase
582 582 __ push(rbx); // save methodOop
583 583 if (ProfileInterpreter) {
584 584 Label method_data_continue;
585 585 __ movptr(rdx, Address(rbx, in_bytes(methodOopDesc::method_data_offset())));
586 586 __ testptr(rdx, rdx);
587 587 __ jcc(Assembler::zero, method_data_continue);
588 588 __ addptr(rdx, in_bytes(methodDataOopDesc::data_offset()));
589 589 __ bind(method_data_continue);
590 590 __ push(rdx); // set the mdp (method data pointer)
591 591 } else {
592 592 __ push(0);
593 593 }
594 594
595 595 __ movptr(rdx, Address(rbx, methodOopDesc::constants_offset()));
596 596 __ movptr(rdx, Address(rdx, constantPoolOopDesc::cache_offset_in_bytes()));
597 597 __ push(rdx); // set constant pool cache
598 598 __ push(rdi); // set locals pointer
599 599 if (native_call) {
600 600 __ push(0); // no bcp
601 601 } else {
602 602 __ push(rsi); // set bcp
603 603 }
604 604 __ push(0); // reserve word for pointer to expression stack bottom
605 605 __ movptr(Address(rsp, 0), rsp); // set expression stack bottom
606 606 }
607 607
608 608 // End of helpers
609 609
610 610 //
611 611 // Various method entries
612 612 //------------------------------------------------------------------------------------------------------------------------
613 613 //
614 614 //
615 615
616 616 // Call an accessor method (assuming it is resolved, otherwise drop into vanilla (slow path) entry
617 617
618 618 address InterpreterGenerator::generate_accessor_entry(void) {
619 619
620 620 // rbx,: methodOop
621 621 // rcx: receiver (preserve for slow entry into asm interpreter)
622 622
623 623 // rsi: senderSP must preserved for slow path, set SP to it on fast path
624 624
625 625 address entry_point = __ pc();
626 626 Label xreturn_path;
627 627
628 628 // do fastpath for resolved accessor methods
629 629 if (UseFastAccessorMethods) {
630 630 Label slow_path;
631 631 // If we need a safepoint check, generate full interpreter entry.
632 632 ExternalAddress state(SafepointSynchronize::address_of_state());
633 633 __ cmp32(ExternalAddress(SafepointSynchronize::address_of_state()),
634 634 SafepointSynchronize::_not_synchronized);
635 635
636 636 __ jcc(Assembler::notEqual, slow_path);
637 637 // ASM/C++ Interpreter
638 638 // Code: _aload_0, _(i|a)getfield, _(i|a)return or any rewrites thereof; parameter size = 1
639 639 // Note: We can only use this code if the getfield has been resolved
640 640 // and if we don't have a null-pointer exception => check for
641 641 // these conditions first and use slow path if necessary.
642 642 // rbx,: method
643 643 // rcx: receiver
644 644 __ movptr(rax, Address(rsp, wordSize));
645 645
646 646 // check if local 0 != NULL and read field
647 647 __ testptr(rax, rax);
648 648 __ jcc(Assembler::zero, slow_path);
649 649
650 650 __ movptr(rdi, Address(rbx, methodOopDesc::constants_offset()));
651 651 // read first instruction word and extract bytecode @ 1 and index @ 2
652 652 __ movptr(rdx, Address(rbx, methodOopDesc::const_offset()));
653 653 __ movl(rdx, Address(rdx, constMethodOopDesc::codes_offset()));
654 654 // Shift codes right to get the index on the right.
655 655 // The bytecode fetched looks like <index><0xb4><0x2a>
656 656 __ shrl(rdx, 2*BitsPerByte);
657 657 __ shll(rdx, exact_log2(in_words(ConstantPoolCacheEntry::size())));
658 658 __ movptr(rdi, Address(rdi, constantPoolOopDesc::cache_offset_in_bytes()));
659 659
660 660 // rax,: local 0
661 661 // rbx,: method
662 662 // rcx: receiver - do not destroy since it is needed for slow path!
663 663 // rcx: scratch
664 664 // rdx: constant pool cache index
665 665 // rdi: constant pool cache
666 666 // rsi: sender sp
667 667
668 668 // check if getfield has been resolved and read constant pool cache entry
669 669 // check the validity of the cache entry by testing whether _indices field
670 670 // contains Bytecode::_getfield in b1 byte.
671 671 assert(in_words(ConstantPoolCacheEntry::size()) == 4, "adjust shift below");
672 672 __ movl(rcx,
673 673 Address(rdi,
674 674 rdx,
675 675 Address::times_ptr, constantPoolCacheOopDesc::base_offset() + ConstantPoolCacheEntry::indices_offset()));
676 676 __ shrl(rcx, 2*BitsPerByte);
677 677 __ andl(rcx, 0xFF);
678 678 __ cmpl(rcx, Bytecodes::_getfield);
679 679 __ jcc(Assembler::notEqual, slow_path);
680 680
681 681 // Note: constant pool entry is not valid before bytecode is resolved
682 682 __ movptr(rcx,
683 683 Address(rdi,
684 684 rdx,
685 685 Address::times_ptr, constantPoolCacheOopDesc::base_offset() + ConstantPoolCacheEntry::f2_offset()));
686 686 __ movl(rdx,
687 687 Address(rdi,
688 688 rdx,
689 689 Address::times_ptr, constantPoolCacheOopDesc::base_offset() + ConstantPoolCacheEntry::flags_offset()));
690 690
691 691 Label notByte, notShort, notChar;
692 692 const Address field_address (rax, rcx, Address::times_1);
693 693
694 694 // Need to differentiate between igetfield, agetfield, bgetfield etc.
695 695 // because they are different sizes.
696 696 // Use the type from the constant pool cache
697 697 __ shrl(rdx, ConstantPoolCacheEntry::tosBits);
698 698 // Make sure we don't need to mask rdx for tosBits after the above shift
699 699 ConstantPoolCacheEntry::verify_tosBits();
700 700 __ cmpl(rdx, btos);
701 701 __ jcc(Assembler::notEqual, notByte);
702 702 __ load_signed_byte(rax, field_address);
703 703 __ jmp(xreturn_path);
704 704
705 705 __ bind(notByte);
706 706 __ cmpl(rdx, stos);
707 707 __ jcc(Assembler::notEqual, notShort);
708 708 __ load_signed_short(rax, field_address);
709 709 __ jmp(xreturn_path);
710 710
711 711 __ bind(notShort);
712 712 __ cmpl(rdx, ctos);
713 713 __ jcc(Assembler::notEqual, notChar);
714 714 __ load_unsigned_short(rax, field_address);
715 715 __ jmp(xreturn_path);
716 716
717 717 __ bind(notChar);
718 718 #ifdef ASSERT
719 719 Label okay;
720 720 __ cmpl(rdx, atos);
721 721 __ jcc(Assembler::equal, okay);
722 722 __ cmpl(rdx, itos);
723 723 __ jcc(Assembler::equal, okay);
724 724 __ stop("what type is this?");
725 725 __ bind(okay);
726 726 #endif // ASSERT
727 727 // All the rest are a 32 bit wordsize
728 728 // This is ok for now. Since fast accessors should be going away
729 729 __ movptr(rax, field_address);
730 730
731 731 __ bind(xreturn_path);
732 732
733 733 // _ireturn/_areturn
734 734 __ pop(rdi); // get return address
735 735 __ mov(rsp, rsi); // set sp to sender sp
736 736 __ jmp(rdi);
737 737
738 738 // generate a vanilla interpreter entry as the slow path
739 739 __ bind(slow_path);
740 740
741 741 (void) generate_normal_entry(false);
742 742 return entry_point;
743 743 }
744 744 return NULL;
745 745
746 746 }
747 747
748 748 //
749 749 // Interpreter stub for calling a native method. (asm interpreter)
750 750 // This sets up a somewhat different looking stack for calling the native method
751 751 // than the typical interpreter frame setup.
752 752 //
753 753
754 754 address InterpreterGenerator::generate_native_entry(bool synchronized) {
755 755 // determine code generation flags
756 756 bool inc_counter = UseCompiler || CountCompiledCalls;
757 757
758 758 // rbx,: methodOop
759 759 // rsi: sender sp
760 760 // rsi: previous interpreter state (C++ interpreter) must preserve
761 761 address entry_point = __ pc();
762 762
763 763
764 764 const Address size_of_parameters(rbx, methodOopDesc::size_of_parameters_offset());
765 765 const Address invocation_counter(rbx, methodOopDesc::invocation_counter_offset() + InvocationCounter::counter_offset());
766 766 const Address access_flags (rbx, methodOopDesc::access_flags_offset());
767 767
768 768 // get parameter size (always needed)
769 769 __ load_unsigned_short(rcx, size_of_parameters);
770 770
771 771 // native calls don't need the stack size check since they have no expression stack
772 772 // and the arguments are already on the stack and we only add a handful of words
773 773 // to the stack
774 774
775 775 // rbx,: methodOop
776 776 // rcx: size of parameters
777 777 // rsi: sender sp
778 778
779 779 __ pop(rax); // get return address
780 780 // for natives the size of locals is zero
781 781
782 782 // compute beginning of parameters (rdi)
783 783 __ lea(rdi, Address(rsp, rcx, Interpreter::stackElementScale(), -wordSize));
784 784
785 785
786 786 // add 2 zero-initialized slots for native calls
787 787 // NULL result handler
788 788 __ push((int32_t)NULL_WORD);
789 789 // NULL oop temp (mirror or jni oop result)
790 790 __ push((int32_t)NULL_WORD);
791 791
792 792 if (inc_counter) __ movl(rcx, invocation_counter); // (pre-)fetch invocation count
793 793 // initialize fixed part of activation frame
794 794
795 795 generate_fixed_frame(true);
796 796
797 797 // make sure method is native & not abstract
798 798 #ifdef ASSERT
799 799 __ movl(rax, access_flags);
800 800 {
801 801 Label L;
802 802 __ testl(rax, JVM_ACC_NATIVE);
803 803 __ jcc(Assembler::notZero, L);
804 804 __ stop("tried to execute non-native method as native");
805 805 __ bind(L);
806 806 }
807 807 { Label L;
808 808 __ testl(rax, JVM_ACC_ABSTRACT);
809 809 __ jcc(Assembler::zero, L);
810 810 __ stop("tried to execute abstract method in interpreter");
811 811 __ bind(L);
812 812 }
813 813 #endif
814 814
815 815 // Since at this point in the method invocation the exception handler
816 816 // would try to exit the monitor of synchronized methods which hasn't
817 817 // been entered yet, we set the thread local variable
818 818 // _do_not_unlock_if_synchronized to true. The remove_activation will
819 819 // check this flag.
820 820
821 821 __ get_thread(rax);
822 822 const Address do_not_unlock_if_synchronized(rax,
823 823 in_bytes(JavaThread::do_not_unlock_if_synchronized_offset()));
824 824 __ movbool(do_not_unlock_if_synchronized, true);
825 825
826 826 // increment invocation count & check for overflow
827 827 Label invocation_counter_overflow;
828 828 if (inc_counter) {
829 829 generate_counter_incr(&invocation_counter_overflow, NULL, NULL);
830 830 }
831 831
832 832 Label continue_after_compile;
833 833 __ bind(continue_after_compile);
834 834
835 835 bang_stack_shadow_pages(true);
836 836
837 837 // reset the _do_not_unlock_if_synchronized flag
838 838 __ get_thread(rax);
839 839 __ movbool(do_not_unlock_if_synchronized, false);
840 840
841 841 // check for synchronized methods
842 842 // Must happen AFTER invocation_counter check and stack overflow check,
843 843 // so method is not locked if overflows.
844 844 //
845 845 if (synchronized) {
846 846 lock_method();
847 847 } else {
848 848 // no synchronization necessary
849 849 #ifdef ASSERT
850 850 { Label L;
851 851 __ movl(rax, access_flags);
852 852 __ testl(rax, JVM_ACC_SYNCHRONIZED);
853 853 __ jcc(Assembler::zero, L);
854 854 __ stop("method needs synchronization");
855 855 __ bind(L);
856 856 }
857 857 #endif
858 858 }
859 859
860 860 // start execution
861 861 #ifdef ASSERT
862 862 { Label L;
863 863 const Address monitor_block_top (rbp,
864 864 frame::interpreter_frame_monitor_block_top_offset * wordSize);
865 865 __ movptr(rax, monitor_block_top);
866 866 __ cmpptr(rax, rsp);
867 867 __ jcc(Assembler::equal, L);
868 868 __ stop("broken stack frame setup in interpreter");
869 869 __ bind(L);
870 870 }
871 871 #endif
872 872
873 873 // jvmti/dtrace support
874 874 __ notify_method_entry();
875 875
876 876 // work registers
877 877 const Register method = rbx;
878 878 const Register thread = rdi;
879 879 const Register t = rcx;
880 880
881 881 // allocate space for parameters
882 882 __ get_method(method);
883 883 __ verify_oop(method);
884 884 __ load_unsigned_short(t, Address(method, methodOopDesc::size_of_parameters_offset()));
885 885 __ shlptr(t, Interpreter::logStackElementSize());
886 886 __ addptr(t, 2*wordSize); // allocate two more slots for JNIEnv and possible mirror
887 887 __ subptr(rsp, t);
888 888 __ andptr(rsp, -(StackAlignmentInBytes)); // gcc needs 16 byte aligned stacks to do XMM intrinsics
889 889
890 890 // get signature handler
891 891 { Label L;
892 892 __ movptr(t, Address(method, methodOopDesc::signature_handler_offset()));
893 893 __ testptr(t, t);
894 894 __ jcc(Assembler::notZero, L);
895 895 __ call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::prepare_native_call), method);
896 896 __ get_method(method);
897 897 __ movptr(t, Address(method, methodOopDesc::signature_handler_offset()));
898 898 __ bind(L);
899 899 }
900 900
901 901 // call signature handler
902 902 assert(InterpreterRuntime::SignatureHandlerGenerator::from() == rdi, "adjust this code");
903 903 assert(InterpreterRuntime::SignatureHandlerGenerator::to () == rsp, "adjust this code");
904 904 assert(InterpreterRuntime::SignatureHandlerGenerator::temp() == t , "adjust this code");
905 905 // The generated handlers do not touch RBX (the method oop).
906 906 // However, large signatures cannot be cached and are generated
907 907 // each time here. The slow-path generator will blow RBX
908 908 // sometime, so we must reload it after the call.
909 909 __ call(t);
910 910 __ get_method(method); // slow path call blows RBX on DevStudio 5.0
911 911
912 912 // result handler is in rax,
913 913 // set result handler
914 914 __ movptr(Address(rbp, frame::interpreter_frame_result_handler_offset*wordSize), rax);
915 915
916 916 // pass mirror handle if static call
917 917 { Label L;
918 918 const int mirror_offset = klassOopDesc::klass_part_offset_in_bytes() + Klass::java_mirror_offset_in_bytes();
919 919 __ movl(t, Address(method, methodOopDesc::access_flags_offset()));
920 920 __ testl(t, JVM_ACC_STATIC);
921 921 __ jcc(Assembler::zero, L);
922 922 // get mirror
923 923 __ movptr(t, Address(method, methodOopDesc:: constants_offset()));
924 924 __ movptr(t, Address(t, constantPoolOopDesc::pool_holder_offset_in_bytes()));
925 925 __ movptr(t, Address(t, mirror_offset));
926 926 // copy mirror into activation frame
927 927 __ movptr(Address(rbp, frame::interpreter_frame_oop_temp_offset * wordSize), t);
928 928 // pass handle to mirror
929 929 __ lea(t, Address(rbp, frame::interpreter_frame_oop_temp_offset * wordSize));
930 930 __ movptr(Address(rsp, wordSize), t);
931 931 __ bind(L);
932 932 }
933 933
934 934 // get native function entry point
935 935 { Label L;
936 936 __ movptr(rax, Address(method, methodOopDesc::native_function_offset()));
937 937 ExternalAddress unsatisfied(SharedRuntime::native_method_throw_unsatisfied_link_error_entry());
938 938 __ cmpptr(rax, unsatisfied.addr());
939 939 __ jcc(Assembler::notEqual, L);
940 940 __ call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::prepare_native_call), method);
941 941 __ get_method(method);
942 942 __ verify_oop(method);
943 943 __ movptr(rax, Address(method, methodOopDesc::native_function_offset()));
944 944 __ bind(L);
945 945 }
946 946
947 947 // pass JNIEnv
948 948 __ get_thread(thread);
949 949 __ lea(t, Address(thread, JavaThread::jni_environment_offset()));
950 950 __ movptr(Address(rsp, 0), t);
951 951
952 952 // set_last_Java_frame_before_call
953 953 // It is enough that the pc()
954 954 // points into the right code segment. It does not have to be the correct return pc.
955 955 __ set_last_Java_frame(thread, noreg, rbp, __ pc());
956 956
957 957 // change thread state
958 958 #ifdef ASSERT
959 959 { Label L;
960 960 __ movl(t, Address(thread, JavaThread::thread_state_offset()));
961 961 __ cmpl(t, _thread_in_Java);
962 962 __ jcc(Assembler::equal, L);
963 963 __ stop("Wrong thread state in native stub");
964 964 __ bind(L);
965 965 }
966 966 #endif
967 967
968 968 // Change state to native
969 969 __ movl(Address(thread, JavaThread::thread_state_offset()), _thread_in_native);
970 970 __ call(rax);
971 971
972 972 // result potentially in rdx:rax or ST0
973 973
974 974 // Either restore the MXCSR register after returning from the JNI Call
975 975 // or verify that it wasn't changed.
976 976 if (VM_Version::supports_sse()) {
977 977 if (RestoreMXCSROnJNICalls) {
978 978 __ ldmxcsr(ExternalAddress(StubRoutines::addr_mxcsr_std()));
979 979 }
980 980 else if (CheckJNICalls ) {
981 981 __ call(RuntimeAddress(StubRoutines::x86::verify_mxcsr_entry()));
982 982 }
983 983 }
984 984
985 985 // Either restore the x87 floating pointer control word after returning
986 986 // from the JNI call or verify that it wasn't changed.
987 987 if (CheckJNICalls) {
988 988 __ call(RuntimeAddress(StubRoutines::x86::verify_fpu_cntrl_wrd_entry()));
989 989 }
990 990
991 991 // save potential result in ST(0) & rdx:rax
992 992 // (if result handler is the T_FLOAT or T_DOUBLE handler, result must be in ST0 -
993 993 // the check is necessary to avoid potential Intel FPU overflow problems by saving/restoring 'empty' FPU registers)
994 994 // It is safe to do this push because state is _thread_in_native and return address will be found
995 995 // via _last_native_pc and not via _last_jave_sp
996 996
997 997 // NOTE: the order of theses push(es) is known to frame::interpreter_frame_result.
998 998 // If the order changes or anything else is added to the stack the code in
999 999 // interpreter_frame_result will have to be changed.
1000 1000
1001 1001 { Label L;
1002 1002 Label push_double;
1003 1003 ExternalAddress float_handler(AbstractInterpreter::result_handler(T_FLOAT));
1004 1004 ExternalAddress double_handler(AbstractInterpreter::result_handler(T_DOUBLE));
1005 1005 __ cmpptr(Address(rbp, (frame::interpreter_frame_oop_temp_offset + 1)*wordSize),
1006 1006 float_handler.addr());
1007 1007 __ jcc(Assembler::equal, push_double);
1008 1008 __ cmpptr(Address(rbp, (frame::interpreter_frame_oop_temp_offset + 1)*wordSize),
1009 1009 double_handler.addr());
1010 1010 __ jcc(Assembler::notEqual, L);
1011 1011 __ bind(push_double);
1012 1012 __ push(dtos);
1013 1013 __ bind(L);
1014 1014 }
1015 1015 __ push(ltos);
1016 1016
1017 1017 // change thread state
1018 1018 __ get_thread(thread);
1019 1019 __ movl(Address(thread, JavaThread::thread_state_offset()), _thread_in_native_trans);
1020 1020 if(os::is_MP()) {
1021 1021 if (UseMembar) {
1022 1022 // Force this write out before the read below
1023 1023 __ membar(Assembler::Membar_mask_bits(
1024 1024 Assembler::LoadLoad | Assembler::LoadStore |
1025 1025 Assembler::StoreLoad | Assembler::StoreStore));
1026 1026 } else {
1027 1027 // Write serialization page so VM thread can do a pseudo remote membar.
1028 1028 // We use the current thread pointer to calculate a thread specific
1029 1029 // offset to write to within the page. This minimizes bus traffic
1030 1030 // due to cache line collision.
1031 1031 __ serialize_memory(thread, rcx);
1032 1032 }
1033 1033 }
1034 1034
1035 1035 if (AlwaysRestoreFPU) {
1036 1036 // Make sure the control word is correct.
1037 1037 __ fldcw(ExternalAddress(StubRoutines::addr_fpu_cntrl_wrd_std()));
1038 1038 }
1039 1039
1040 1040 // check for safepoint operation in progress and/or pending suspend requests
1041 1041 { Label Continue;
1042 1042
1043 1043 __ cmp32(ExternalAddress(SafepointSynchronize::address_of_state()),
1044 1044 SafepointSynchronize::_not_synchronized);
1045 1045
1046 1046 Label L;
1047 1047 __ jcc(Assembler::notEqual, L);
1048 1048 __ cmpl(Address(thread, JavaThread::suspend_flags_offset()), 0);
1049 1049 __ jcc(Assembler::equal, Continue);
1050 1050 __ bind(L);
1051 1051
1052 1052 // Don't use call_VM as it will see a possible pending exception and forward it
1053 1053 // and never return here preventing us from clearing _last_native_pc down below.
1054 1054 // Also can't use call_VM_leaf either as it will check to see if rsi & rdi are
1055 1055 // preserved and correspond to the bcp/locals pointers. So we do a runtime call
1056 1056 // by hand.
1057 1057 //
1058 1058 __ push(thread);
1059 1059 __ call(RuntimeAddress(CAST_FROM_FN_PTR(address,
1060 1060 JavaThread::check_special_condition_for_native_trans)));
1061 1061 __ increment(rsp, wordSize);
1062 1062 __ get_thread(thread);
1063 1063
1064 1064 __ bind(Continue);
1065 1065 }
1066 1066
1067 1067 // change thread state
1068 1068 __ movl(Address(thread, JavaThread::thread_state_offset()), _thread_in_Java);
1069 1069
1070 1070 __ reset_last_Java_frame(thread, true, true);
1071 1071
1072 1072 // reset handle block
1073 1073 __ movptr(t, Address(thread, JavaThread::active_handles_offset()));
1074 1074 __ movptr(Address(t, JNIHandleBlock::top_offset_in_bytes()), NULL_WORD);
1075 1075
1076 1076 // If result was an oop then unbox and save it in the frame
1077 1077 { Label L;
1078 1078 Label no_oop, store_result;
1079 1079 ExternalAddress handler(AbstractInterpreter::result_handler(T_OBJECT));
1080 1080 __ cmpptr(Address(rbp, frame::interpreter_frame_result_handler_offset*wordSize),
1081 1081 handler.addr());
1082 1082 __ jcc(Assembler::notEqual, no_oop);
1083 1083 __ cmpptr(Address(rsp, 0), (int32_t)NULL_WORD);
1084 1084 __ pop(ltos);
1085 1085 __ testptr(rax, rax);
1086 1086 __ jcc(Assembler::zero, store_result);
1087 1087 // unbox
1088 1088 __ movptr(rax, Address(rax, 0));
1089 1089 __ bind(store_result);
1090 1090 __ movptr(Address(rbp, (frame::interpreter_frame_oop_temp_offset)*wordSize), rax);
1091 1091 // keep stack depth as expected by pushing oop which will eventually be discarded
1092 1092 __ push(ltos);
1093 1093 __ bind(no_oop);
1094 1094 }
1095 1095
1096 1096 {
1097 1097 Label no_reguard;
1098 1098 __ cmpl(Address(thread, JavaThread::stack_guard_state_offset()), JavaThread::stack_guard_yellow_disabled);
1099 1099 __ jcc(Assembler::notEqual, no_reguard);
1100 1100
1101 1101 __ pusha();
1102 1102 __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, SharedRuntime::reguard_yellow_pages)));
1103 1103 __ popa();
1104 1104
1105 1105 __ bind(no_reguard);
1106 1106 }
1107 1107
1108 1108 // restore rsi to have legal interpreter frame,
1109 1109 // i.e., bci == 0 <=> rsi == code_base()
1110 1110 // Can't call_VM until bcp is within reasonable.
1111 1111 __ get_method(method); // method is junk from thread_in_native to now.
1112 1112 __ verify_oop(method);
1113 1113 __ movptr(rsi, Address(method,methodOopDesc::const_offset())); // get constMethodOop
1114 1114 __ lea(rsi, Address(rsi,constMethodOopDesc::codes_offset())); // get codebase
1115 1115
1116 1116 // handle exceptions (exception handling will handle unlocking!)
1117 1117 { Label L;
1118 1118 __ cmpptr(Address(thread, Thread::pending_exception_offset()), (int32_t)NULL_WORD);
1119 1119 __ jcc(Assembler::zero, L);
1120 1120 // Note: At some point we may want to unify this with the code used in call_VM_base();
1121 1121 // i.e., we should use the StubRoutines::forward_exception code. For now this
1122 1122 // doesn't work here because the rsp is not correctly set at this point.
1123 1123 __ MacroAssembler::call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::throw_pending_exception));
1124 1124 __ should_not_reach_here();
1125 1125 __ bind(L);
1126 1126 }
1127 1127
1128 1128 // do unlocking if necessary
1129 1129 { Label L;
1130 1130 __ movl(t, Address(method, methodOopDesc::access_flags_offset()));
1131 1131 __ testl(t, JVM_ACC_SYNCHRONIZED);
1132 1132 __ jcc(Assembler::zero, L);
1133 1133 // the code below should be shared with interpreter macro assembler implementation
1134 1134 { Label unlock;
1135 1135 // BasicObjectLock will be first in list, since this is a synchronized method. However, need
1136 1136 // to check that the object has not been unlocked by an explicit monitorexit bytecode.
1137 1137 const Address monitor(rbp, frame::interpreter_frame_initial_sp_offset * wordSize - (int)sizeof(BasicObjectLock));
1138 1138
1139 1139 __ lea(rdx, monitor); // address of first monitor
1140 1140
1141 1141 __ movptr(t, Address(rdx, BasicObjectLock::obj_offset_in_bytes()));
1142 1142 __ testptr(t, t);
1143 1143 __ jcc(Assembler::notZero, unlock);
1144 1144
1145 1145 // Entry already unlocked, need to throw exception
1146 1146 __ MacroAssembler::call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::throw_illegal_monitor_state_exception));
1147 1147 __ should_not_reach_here();
1148 1148
1149 1149 __ bind(unlock);
1150 1150 __ unlock_object(rdx);
1151 1151 }
1152 1152 __ bind(L);
1153 1153 }
1154 1154
1155 1155 // jvmti/dtrace support
1156 1156 // Note: This must happen _after_ handling/throwing any exceptions since
1157 1157 // the exception handler code notifies the runtime of method exits
1158 1158 // too. If this happens before, method entry/exit notifications are
1159 1159 // not properly paired (was bug - gri 11/22/99).
1160 1160 __ notify_method_exit(vtos, InterpreterMacroAssembler::NotifyJVMTI);
1161 1161
1162 1162 // restore potential result in rdx:rax, call result handler to restore potential result in ST0 & handle result
1163 1163 __ pop(ltos);
1164 1164 __ movptr(t, Address(rbp, frame::interpreter_frame_result_handler_offset*wordSize));
1165 1165 __ call(t);
1166 1166
1167 1167 // remove activation
1168 1168 __ movptr(t, Address(rbp, frame::interpreter_frame_sender_sp_offset * wordSize)); // get sender sp
1169 1169 __ leave(); // remove frame anchor
1170 1170 __ pop(rdi); // get return address
1171 1171 __ mov(rsp, t); // set sp to sender sp
1172 1172 __ jmp(rdi);
1173 1173
1174 1174 if (inc_counter) {
1175 1175 // Handle overflow of counter and compile method
1176 1176 __ bind(invocation_counter_overflow);
1177 1177 generate_counter_overflow(&continue_after_compile);
1178 1178 }
1179 1179
1180 1180 return entry_point;
1181 1181 }
1182 1182
1183 1183 //
1184 1184 // Generic interpreted method entry to (asm) interpreter
1185 1185 //
1186 1186 address InterpreterGenerator::generate_normal_entry(bool synchronized) {
1187 1187 // determine code generation flags
1188 1188 bool inc_counter = UseCompiler || CountCompiledCalls;
1189 1189
1190 1190 // rbx,: methodOop
1191 1191 // rsi: sender sp
1192 1192 address entry_point = __ pc();
1193 1193
1194 1194
1195 1195 const Address size_of_parameters(rbx, methodOopDesc::size_of_parameters_offset());
1196 1196 const Address size_of_locals (rbx, methodOopDesc::size_of_locals_offset());
1197 1197 const Address invocation_counter(rbx, methodOopDesc::invocation_counter_offset() + InvocationCounter::counter_offset());
1198 1198 const Address access_flags (rbx, methodOopDesc::access_flags_offset());
1199 1199
1200 1200 // get parameter size (always needed)
1201 1201 __ load_unsigned_short(rcx, size_of_parameters);
1202 1202
1203 1203 // rbx,: methodOop
1204 1204 // rcx: size of parameters
1205 1205
1206 1206 // rsi: sender_sp (could differ from sp+wordSize if we were called via c2i )
1207 1207
1208 1208 __ load_unsigned_short(rdx, size_of_locals); // get size of locals in words
1209 1209 __ subl(rdx, rcx); // rdx = no. of additional locals
1210 1210
1211 1211 // see if we've got enough room on the stack for locals plus overhead.
1212 1212 generate_stack_overflow_check();
1213 1213
1214 1214 // get return address
1215 1215 __ pop(rax);
1216 1216
1217 1217 // compute beginning of parameters (rdi)
1218 1218 __ lea(rdi, Address(rsp, rcx, Interpreter::stackElementScale(), -wordSize));
1219 1219
1220 1220 // rdx - # of additional locals
1221 1221 // allocate space for locals
1222 1222 // explicitly initialize locals
1223 1223 {
1224 1224 Label exit, loop;
1225 1225 __ testl(rdx, rdx);
1226 1226 __ jcc(Assembler::lessEqual, exit); // do nothing if rdx <= 0
1227 1227 __ bind(loop);
1228 1228 if (TaggedStackInterpreter) {
1229 1229 __ push((int32_t)NULL_WORD); // push tag
1230 1230 }
1231 1231 __ push((int32_t)NULL_WORD); // initialize local variables
1232 1232 __ decrement(rdx); // until everything initialized
1233 1233 __ jcc(Assembler::greater, loop);
1234 1234 __ bind(exit);
1235 1235 }
1236 1236
1237 1237 if (inc_counter) __ movl(rcx, invocation_counter); // (pre-)fetch invocation count
1238 1238 // initialize fixed part of activation frame
1239 1239 generate_fixed_frame(false);
1240 1240
1241 1241 // make sure method is not native & not abstract
1242 1242 #ifdef ASSERT
1243 1243 __ movl(rax, access_flags);
1244 1244 {
1245 1245 Label L;
1246 1246 __ testl(rax, JVM_ACC_NATIVE);
1247 1247 __ jcc(Assembler::zero, L);
1248 1248 __ stop("tried to execute native method as non-native");
1249 1249 __ bind(L);
1250 1250 }
1251 1251 { Label L;
1252 1252 __ testl(rax, JVM_ACC_ABSTRACT);
1253 1253 __ jcc(Assembler::zero, L);
1254 1254 __ stop("tried to execute abstract method in interpreter");
1255 1255 __ bind(L);
1256 1256 }
1257 1257 #endif
1258 1258
1259 1259 // Since at this point in the method invocation the exception handler
1260 1260 // would try to exit the monitor of synchronized methods which hasn't
1261 1261 // been entered yet, we set the thread local variable
1262 1262 // _do_not_unlock_if_synchronized to true. The remove_activation will
1263 1263 // check this flag.
1264 1264
1265 1265 __ get_thread(rax);
1266 1266 const Address do_not_unlock_if_synchronized(rax,
1267 1267 in_bytes(JavaThread::do_not_unlock_if_synchronized_offset()));
1268 1268 __ movbool(do_not_unlock_if_synchronized, true);
1269 1269
1270 1270 // increment invocation count & check for overflow
1271 1271 Label invocation_counter_overflow;
1272 1272 Label profile_method;
1273 1273 Label profile_method_continue;
1274 1274 if (inc_counter) {
1275 1275 generate_counter_incr(&invocation_counter_overflow, &profile_method, &profile_method_continue);
1276 1276 if (ProfileInterpreter) {
1277 1277 __ bind(profile_method_continue);
1278 1278 }
1279 1279 }
1280 1280 Label continue_after_compile;
1281 1281 __ bind(continue_after_compile);
1282 1282
1283 1283 bang_stack_shadow_pages(false);
1284 1284
1285 1285 // reset the _do_not_unlock_if_synchronized flag
1286 1286 __ get_thread(rax);
1287 1287 __ movbool(do_not_unlock_if_synchronized, false);
1288 1288
1289 1289 // check for synchronized methods
1290 1290 // Must happen AFTER invocation_counter check and stack overflow check,
1291 1291 // so method is not locked if overflows.
1292 1292 //
1293 1293 if (synchronized) {
1294 1294 // Allocate monitor and lock method
1295 1295 lock_method();
1296 1296 } else {
1297 1297 // no synchronization necessary
1298 1298 #ifdef ASSERT
1299 1299 { Label L;
1300 1300 __ movl(rax, access_flags);
1301 1301 __ testl(rax, JVM_ACC_SYNCHRONIZED);
1302 1302 __ jcc(Assembler::zero, L);
1303 1303 __ stop("method needs synchronization");
1304 1304 __ bind(L);
1305 1305 }
1306 1306 #endif
1307 1307 }
1308 1308
1309 1309 // start execution
1310 1310 #ifdef ASSERT
1311 1311 { Label L;
1312 1312 const Address monitor_block_top (rbp,
1313 1313 frame::interpreter_frame_monitor_block_top_offset * wordSize);
1314 1314 __ movptr(rax, monitor_block_top);
1315 1315 __ cmpptr(rax, rsp);
1316 1316 __ jcc(Assembler::equal, L);
1317 1317 __ stop("broken stack frame setup in interpreter");
1318 1318 __ bind(L);
1319 1319 }
1320 1320 #endif
1321 1321
1322 1322 // jvmti support
1323 1323 __ notify_method_entry();
1324 1324
1325 1325 __ dispatch_next(vtos);
1326 1326
1327 1327 // invocation counter overflow
1328 1328 if (inc_counter) {
1329 1329 if (ProfileInterpreter) {
1330 1330 // We have decided to profile this method in the interpreter
1331 1331 __ bind(profile_method);
1332 1332
1333 1333 __ call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::profile_method), rsi, true);
1334 1334
1335 1335 __ movptr(rbx, Address(rbp, method_offset)); // restore methodOop
1336 1336 __ movptr(rax, Address(rbx, in_bytes(methodOopDesc::method_data_offset())));
1337 1337 __ movptr(Address(rbp, frame::interpreter_frame_mdx_offset * wordSize), rax);
1338 1338 __ test_method_data_pointer(rax, profile_method_continue);
1339 1339 __ addptr(rax, in_bytes(methodDataOopDesc::data_offset()));
1340 1340 __ movptr(Address(rbp, frame::interpreter_frame_mdx_offset * wordSize), rax);
1341 1341 __ jmp(profile_method_continue);
1342 1342 }
1343 1343 // Handle overflow of counter and compile method
1344 1344 __ bind(invocation_counter_overflow);
1345 1345 generate_counter_overflow(&continue_after_compile);
1346 1346 }
1347 1347
1348 1348 return entry_point;
1349 1349 }
1350 1350
1351 1351 //------------------------------------------------------------------------------------------------------------------------
1352 1352 // Entry points
1353 1353 //
1354 1354 // Here we generate the various kind of entries into the interpreter.
1355 1355 // The two main entry type are generic bytecode methods and native call method.
1356 1356 // These both come in synchronized and non-synchronized versions but the
1357 1357 // frame layout they create is very similar. The other method entry
1358 1358 // types are really just special purpose entries that are really entry
1359 1359 // and interpretation all in one. These are for trivial methods like
1360 1360 // accessor, empty, or special math methods.
1361 1361 //
1362 1362 // When control flow reaches any of the entry types for the interpreter
1363 1363 // the following holds ->
1364 1364 //
1365 1365 // Arguments:
1366 1366 //
1367 1367 // rbx,: methodOop
1368 1368 // rcx: receiver
1369 1369 //
1370 1370 //
1371 1371 // Stack layout immediately at entry
1372 1372 //
1373 1373 // [ return address ] <--- rsp
1374 1374 // [ parameter n ]
1375 1375 // ...
1376 1376 // [ parameter 1 ]
1377 1377 // [ expression stack ] (caller's java expression stack)
1378 1378
1379 1379 // Assuming that we don't go to one of the trivial specialized
1380 1380 // entries the stack will look like below when we are ready to execute
1381 1381 // the first bytecode (or call the native routine). The register usage
1382 1382 // will be as the template based interpreter expects (see interpreter_x86.hpp).
1383 1383 //
1384 1384 // local variables follow incoming parameters immediately; i.e.
1385 1385 // the return address is moved to the end of the locals).
1386 1386 //
1387 1387 // [ monitor entry ] <--- rsp
1388 1388 // ...
1389 1389 // [ monitor entry ]
1390 1390 // [ expr. stack bottom ]
1391 1391 // [ saved rsi ]
1392 1392 // [ current rdi ]
1393 1393 // [ methodOop ]
1394 1394 // [ saved rbp, ] <--- rbp,
1395 1395 // [ return address ]
1396 1396 // [ local variable m ]
1397 1397 // ...
1398 1398 // [ local variable 1 ]
1399 1399 // [ parameter n ]
1400 1400 // ...
1401 1401 // [ parameter 1 ] <--- rdi
1402 1402
1403 1403 address AbstractInterpreterGenerator::generate_method_entry(AbstractInterpreter::MethodKind kind) {
1404 1404 // determine code generation flags
1405 1405 bool synchronized = false;
1406 1406 address entry_point = NULL;
1407 1407
1408 1408 switch (kind) {
1409 1409 case Interpreter::zerolocals : break;
1410 1410 case Interpreter::zerolocals_synchronized: synchronized = true; break;
1411 1411 case Interpreter::native : entry_point = ((InterpreterGenerator*)this)->generate_native_entry(false); break;
1412 1412 case Interpreter::native_synchronized : entry_point = ((InterpreterGenerator*)this)->generate_native_entry(true); break;
1413 1413 case Interpreter::empty : entry_point = ((InterpreterGenerator*)this)->generate_empty_entry(); break;
1414 1414 case Interpreter::accessor : entry_point = ((InterpreterGenerator*)this)->generate_accessor_entry(); break;
1415 1415 case Interpreter::abstract : entry_point = ((InterpreterGenerator*)this)->generate_abstract_entry(); break;
1416 1416 case Interpreter::method_handle : entry_point = ((InterpreterGenerator*)this)->generate_method_handle_entry(); break;
1417 1417
1418 1418 case Interpreter::java_lang_math_sin : // fall thru
1419 1419 case Interpreter::java_lang_math_cos : // fall thru
1420 1420 case Interpreter::java_lang_math_tan : // fall thru
1421 1421 case Interpreter::java_lang_math_abs : // fall thru
1422 1422 case Interpreter::java_lang_math_log : // fall thru
1423 1423 case Interpreter::java_lang_math_log10 : // fall thru
1424 1424 case Interpreter::java_lang_math_sqrt : entry_point = ((InterpreterGenerator*)this)->generate_math_entry(kind); break;
1425 1425 default : ShouldNotReachHere(); break;
1426 1426 }
1427 1427
1428 1428 if (entry_point) return entry_point;
1429 1429
1430 1430 return ((InterpreterGenerator*)this)->generate_normal_entry(synchronized);
1431 1431
1432 1432 }
1433 1433
1434 1434 // How much stack a method activation needs in words.
1435 1435 int AbstractInterpreter::size_top_interpreter_activation(methodOop method) {
1436 1436
1437 1437 const int stub_code = 4; // see generate_call_stub
1438 1438 // Save space for one monitor to get into the interpreted method in case
1439 1439 // the method is synchronized
1440 1440 int monitor_size = method->is_synchronized() ?
1441 1441 1*frame::interpreter_frame_monitor_size() : 0;
1442 1442
1443 1443 // total overhead size: entry_size + (saved rbp, thru expr stack bottom).
1444 1444 // be sure to change this if you add/subtract anything to/from the overhead area
1445 1445 const int overhead_size = -frame::interpreter_frame_initial_sp_offset;
1446 1446
1447 1447 const int extra_stack = methodOopDesc::extra_stack_entries();
1448 1448 const int method_stack = (method->max_locals() + method->max_stack() + extra_stack) *
1449 1449 Interpreter::stackElementWords();
1450 1450 return overhead_size + method_stack + stub_code;
1451 1451 }
1452 1452
1453 1453 // asm based interpreter deoptimization helpers
1454 1454
1455 1455 int AbstractInterpreter::layout_activation(methodOop method,
1456 1456 int tempcount,
1457 1457 int popframe_extra_args,
1458 1458 int moncount,
1459 1459 int callee_param_count,
1460 1460 int callee_locals,
1461 1461 frame* caller,
1462 1462 frame* interpreter_frame,
1463 1463 bool is_top_frame) {
1464 1464 // Note: This calculation must exactly parallel the frame setup
1465 1465 // in AbstractInterpreterGenerator::generate_method_entry.
1466 1466 // If interpreter_frame!=NULL, set up the method, locals, and monitors.
1467 1467 // The frame interpreter_frame, if not NULL, is guaranteed to be the right size,
1468 1468 // as determined by a previous call to this method.
1469 1469 // It is also guaranteed to be walkable even though it is in a skeletal state
1470 1470 // NOTE: return size is in words not bytes
1471 1471
1472 1472 // fixed size of an interpreter frame:
1473 1473 int max_locals = method->max_locals() * Interpreter::stackElementWords();
1474 1474 int extra_locals = (method->max_locals() - method->size_of_parameters()) *
1475 1475 Interpreter::stackElementWords();
1476 1476
1477 1477 int overhead = frame::sender_sp_offset - frame::interpreter_frame_initial_sp_offset;
1478 1478
1479 1479 // Our locals were accounted for by the caller (or last_frame_adjust on the transistion)
1480 1480 // Since the callee parameters already account for the callee's params we only need to account for
↓ open down ↓ |
1480 lines elided |
↑ open up ↑ |
1481 1481 // the extra locals.
1482 1482
1483 1483
1484 1484 int size = overhead +
1485 1485 ((callee_locals - callee_param_count)*Interpreter::stackElementWords()) +
1486 1486 (moncount*frame::interpreter_frame_monitor_size()) +
1487 1487 tempcount*Interpreter::stackElementWords() + popframe_extra_args;
1488 1488
1489 1489 if (interpreter_frame != NULL) {
1490 1490 #ifdef ASSERT
1491 - assert(caller->unextended_sp() == interpreter_frame->interpreter_frame_sender_sp(), "Frame not properly walkable");
1491 + if (!EnableMethodHandles)
1492 + // @@@ FIXME: Should we correct interpreter_frame_sender_sp in the calling sequences?
1493 + // Probably, since deoptimization doesn't work yet.
1494 + assert(caller->unextended_sp() == interpreter_frame->interpreter_frame_sender_sp(), "Frame not properly walkable");
1492 1495 assert(caller->sp() == interpreter_frame->sender_sp(), "Frame not properly walkable(2)");
1493 1496 #endif
1494 1497
1495 1498 interpreter_frame->interpreter_frame_set_method(method);
1496 1499 // NOTE the difference in using sender_sp and interpreter_frame_sender_sp
1497 1500 // interpreter_frame_sender_sp is the original sp of the caller (the unextended_sp)
1498 1501 // and sender_sp is fp+8
1499 1502 intptr_t* locals = interpreter_frame->sender_sp() + max_locals - 1;
1500 1503
1501 1504 interpreter_frame->interpreter_frame_set_locals(locals);
1502 1505 BasicObjectLock* montop = interpreter_frame->interpreter_frame_monitor_begin();
1503 1506 BasicObjectLock* monbot = montop - moncount;
1504 1507 interpreter_frame->interpreter_frame_set_monitor_end(monbot);
1505 1508
1506 1509 // Set last_sp
1507 1510 intptr_t* rsp = (intptr_t*) monbot -
1508 1511 tempcount*Interpreter::stackElementWords() -
1509 1512 popframe_extra_args;
1510 1513 interpreter_frame->interpreter_frame_set_last_sp(rsp);
1511 1514
1512 1515 // All frames but the initial (oldest) interpreter frame we fill in have a
1513 1516 // value for sender_sp that allows walking the stack but isn't
1514 1517 // truly correct. Correct the value here.
1515 1518
1516 1519 if (extra_locals != 0 &&
1517 1520 interpreter_frame->sender_sp() == interpreter_frame->interpreter_frame_sender_sp() ) {
1518 1521 interpreter_frame->set_interpreter_frame_sender_sp(caller->sp() + extra_locals);
1519 1522 }
1520 1523 *interpreter_frame->interpreter_frame_cache_addr() =
1521 1524 method->constants()->cache();
1522 1525 }
1523 1526 return size;
1524 1527 }
1525 1528
1526 1529
1527 1530 //------------------------------------------------------------------------------------------------------------------------
1528 1531 // Exceptions
1529 1532
1530 1533 void TemplateInterpreterGenerator::generate_throw_exception() {
1531 1534 // Entry point in previous activation (i.e., if the caller was interpreted)
1532 1535 Interpreter::_rethrow_exception_entry = __ pc();
1533 1536
1534 1537 // Restore sp to interpreter_frame_last_sp even though we are going
1535 1538 // to empty the expression stack for the exception processing.
1536 1539 __ movptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), NULL_WORD);
1537 1540 // rax,: exception
1538 1541 // rdx: return address/pc that threw exception
1539 1542 __ restore_bcp(); // rsi points to call/send
1540 1543 __ restore_locals();
1541 1544
1542 1545 // Entry point for exceptions thrown within interpreter code
1543 1546 Interpreter::_throw_exception_entry = __ pc();
1544 1547 // expression stack is undefined here
1545 1548 // rax,: exception
1546 1549 // rsi: exception bcp
1547 1550 __ verify_oop(rax);
1548 1551
1549 1552 // expression stack must be empty before entering the VM in case of an exception
1550 1553 __ empty_expression_stack();
1551 1554 __ empty_FPU_stack();
1552 1555 // find exception handler address and preserve exception oop
1553 1556 __ call_VM(rdx, CAST_FROM_FN_PTR(address, InterpreterRuntime::exception_handler_for_exception), rax);
1554 1557 // rax,: exception handler entry point
1555 1558 // rdx: preserved exception oop
1556 1559 // rsi: bcp for exception handler
1557 1560 __ push_ptr(rdx); // push exception which is now the only value on the stack
1558 1561 __ jmp(rax); // jump to exception handler (may be _remove_activation_entry!)
1559 1562
1560 1563 // If the exception is not handled in the current frame the frame is removed and
1561 1564 // the exception is rethrown (i.e. exception continuation is _rethrow_exception).
1562 1565 //
1563 1566 // Note: At this point the bci is still the bxi for the instruction which caused
1564 1567 // the exception and the expression stack is empty. Thus, for any VM calls
1565 1568 // at this point, GC will find a legal oop map (with empty expression stack).
1566 1569
1567 1570 // In current activation
1568 1571 // tos: exception
1569 1572 // rsi: exception bcp
1570 1573
1571 1574 //
1572 1575 // JVMTI PopFrame support
1573 1576 //
1574 1577
1575 1578 Interpreter::_remove_activation_preserving_args_entry = __ pc();
1576 1579 __ empty_expression_stack();
1577 1580 __ empty_FPU_stack();
1578 1581 // Set the popframe_processing bit in pending_popframe_condition indicating that we are
1579 1582 // currently handling popframe, so that call_VMs that may happen later do not trigger new
1580 1583 // popframe handling cycles.
1581 1584 __ get_thread(rcx);
1582 1585 __ movl(rdx, Address(rcx, JavaThread::popframe_condition_offset()));
1583 1586 __ orl(rdx, JavaThread::popframe_processing_bit);
1584 1587 __ movl(Address(rcx, JavaThread::popframe_condition_offset()), rdx);
1585 1588
1586 1589 {
1587 1590 // Check to see whether we are returning to a deoptimized frame.
1588 1591 // (The PopFrame call ensures that the caller of the popped frame is
1589 1592 // either interpreted or compiled and deoptimizes it if compiled.)
1590 1593 // In this case, we can't call dispatch_next() after the frame is
1591 1594 // popped, but instead must save the incoming arguments and restore
1592 1595 // them after deoptimization has occurred.
1593 1596 //
1594 1597 // Note that we don't compare the return PC against the
1595 1598 // deoptimization blob's unpack entry because of the presence of
1596 1599 // adapter frames in C2.
1597 1600 Label caller_not_deoptimized;
1598 1601 __ movptr(rdx, Address(rbp, frame::return_addr_offset * wordSize));
1599 1602 __ super_call_VM_leaf(CAST_FROM_FN_PTR(address, InterpreterRuntime::interpreter_contains), rdx);
1600 1603 __ testl(rax, rax);
1601 1604 __ jcc(Assembler::notZero, caller_not_deoptimized);
1602 1605
1603 1606 // Compute size of arguments for saving when returning to deoptimized caller
1604 1607 __ get_method(rax);
1605 1608 __ verify_oop(rax);
1606 1609 __ load_unsigned_short(rax, Address(rax, in_bytes(methodOopDesc::size_of_parameters_offset())));
1607 1610 __ shlptr(rax, Interpreter::logStackElementSize());
1608 1611 __ restore_locals();
1609 1612 __ subptr(rdi, rax);
1610 1613 __ addptr(rdi, wordSize);
1611 1614 // Save these arguments
1612 1615 __ get_thread(rcx);
1613 1616 __ super_call_VM_leaf(CAST_FROM_FN_PTR(address, Deoptimization::popframe_preserve_args), rcx, rax, rdi);
1614 1617
1615 1618 __ remove_activation(vtos, rdx,
1616 1619 /* throw_monitor_exception */ false,
1617 1620 /* install_monitor_exception */ false,
1618 1621 /* notify_jvmdi */ false);
1619 1622
1620 1623 // Inform deoptimization that it is responsible for restoring these arguments
1621 1624 __ get_thread(rcx);
1622 1625 __ movl(Address(rcx, JavaThread::popframe_condition_offset()), JavaThread::popframe_force_deopt_reexecution_bit);
1623 1626
1624 1627 // Continue in deoptimization handler
1625 1628 __ jmp(rdx);
1626 1629
1627 1630 __ bind(caller_not_deoptimized);
1628 1631 }
1629 1632
1630 1633 __ remove_activation(vtos, rdx,
1631 1634 /* throw_monitor_exception */ false,
1632 1635 /* install_monitor_exception */ false,
1633 1636 /* notify_jvmdi */ false);
1634 1637
1635 1638 // Finish with popframe handling
1636 1639 // A previous I2C followed by a deoptimization might have moved the
1637 1640 // outgoing arguments further up the stack. PopFrame expects the
1638 1641 // mutations to those outgoing arguments to be preserved and other
1639 1642 // constraints basically require this frame to look exactly as
1640 1643 // though it had previously invoked an interpreted activation with
1641 1644 // no space between the top of the expression stack (current
1642 1645 // last_sp) and the top of stack. Rather than force deopt to
1643 1646 // maintain this kind of invariant all the time we call a small
1644 1647 // fixup routine to move the mutated arguments onto the top of our
1645 1648 // expression stack if necessary.
1646 1649 __ mov(rax, rsp);
1647 1650 __ movptr(rbx, Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize));
1648 1651 __ get_thread(rcx);
1649 1652 // PC must point into interpreter here
1650 1653 __ set_last_Java_frame(rcx, noreg, rbp, __ pc());
1651 1654 __ super_call_VM_leaf(CAST_FROM_FN_PTR(address, InterpreterRuntime::popframe_move_outgoing_args), rcx, rax, rbx);
1652 1655 __ get_thread(rcx);
1653 1656 __ reset_last_Java_frame(rcx, true, true);
1654 1657 // Restore the last_sp and null it out
1655 1658 __ movptr(rsp, Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize));
1656 1659 __ movptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), NULL_WORD);
1657 1660
1658 1661 __ restore_bcp();
1659 1662 __ restore_locals();
1660 1663 // The method data pointer was incremented already during
1661 1664 // call profiling. We have to restore the mdp for the current bcp.
1662 1665 if (ProfileInterpreter) {
1663 1666 __ set_method_data_pointer_for_bcp();
1664 1667 }
1665 1668
1666 1669 // Clear the popframe condition flag
1667 1670 __ get_thread(rcx);
1668 1671 __ movl(Address(rcx, JavaThread::popframe_condition_offset()), JavaThread::popframe_inactive);
1669 1672
1670 1673 __ dispatch_next(vtos);
1671 1674 // end of PopFrame support
1672 1675
1673 1676 Interpreter::_remove_activation_entry = __ pc();
1674 1677
1675 1678 // preserve exception over this code sequence
1676 1679 __ pop_ptr(rax);
1677 1680 __ get_thread(rcx);
1678 1681 __ movptr(Address(rcx, JavaThread::vm_result_offset()), rax);
1679 1682 // remove the activation (without doing throws on illegalMonitorExceptions)
1680 1683 __ remove_activation(vtos, rdx, false, true, false);
1681 1684 // restore exception
1682 1685 __ get_thread(rcx);
1683 1686 __ movptr(rax, Address(rcx, JavaThread::vm_result_offset()));
1684 1687 __ movptr(Address(rcx, JavaThread::vm_result_offset()), NULL_WORD);
1685 1688 __ verify_oop(rax);
1686 1689
1687 1690 // Inbetween activations - previous activation type unknown yet
1688 1691 // compute continuation point - the continuation point expects
1689 1692 // the following registers set up:
1690 1693 //
1691 1694 // rax,: exception
1692 1695 // rdx: return address/pc that threw exception
1693 1696 // rsp: expression stack of caller
1694 1697 // rbp,: rbp, of caller
1695 1698 __ push(rax); // save exception
1696 1699 __ push(rdx); // save return address
1697 1700 __ super_call_VM_leaf(CAST_FROM_FN_PTR(address, SharedRuntime::exception_handler_for_return_address), rdx);
1698 1701 __ mov(rbx, rax); // save exception handler
1699 1702 __ pop(rdx); // restore return address
1700 1703 __ pop(rax); // restore exception
1701 1704 // Note that an "issuing PC" is actually the next PC after the call
1702 1705 __ jmp(rbx); // jump to exception handler of caller
1703 1706 }
1704 1707
1705 1708
1706 1709 //
1707 1710 // JVMTI ForceEarlyReturn support
1708 1711 //
1709 1712 address TemplateInterpreterGenerator::generate_earlyret_entry_for(TosState state) {
1710 1713 address entry = __ pc();
1711 1714
1712 1715 __ restore_bcp();
1713 1716 __ restore_locals();
1714 1717 __ empty_expression_stack();
1715 1718 __ empty_FPU_stack();
1716 1719 __ load_earlyret_value(state);
1717 1720
1718 1721 __ get_thread(rcx);
1719 1722 __ movptr(rcx, Address(rcx, JavaThread::jvmti_thread_state_offset()));
1720 1723 const Address cond_addr(rcx, JvmtiThreadState::earlyret_state_offset());
1721 1724
1722 1725 // Clear the earlyret state
1723 1726 __ movl(cond_addr, JvmtiThreadState::earlyret_inactive);
1724 1727
1725 1728 __ remove_activation(state, rsi,
1726 1729 false, /* throw_monitor_exception */
1727 1730 false, /* install_monitor_exception */
1728 1731 true); /* notify_jvmdi */
1729 1732 __ jmp(rsi);
1730 1733 return entry;
1731 1734 } // end of ForceEarlyReturn support
1732 1735
1733 1736
1734 1737 //------------------------------------------------------------------------------------------------------------------------
1735 1738 // Helper for vtos entry point generation
1736 1739
1737 1740 void TemplateInterpreterGenerator::set_vtos_entry_points (Template* t, address& bep, address& cep, address& sep, address& aep, address& iep, address& lep, address& fep, address& dep, address& vep) {
1738 1741 assert(t->is_valid() && t->tos_in() == vtos, "illegal template");
1739 1742 Label L;
1740 1743 fep = __ pc(); __ push(ftos); __ jmp(L);
1741 1744 dep = __ pc(); __ push(dtos); __ jmp(L);
1742 1745 lep = __ pc(); __ push(ltos); __ jmp(L);
1743 1746 aep = __ pc(); __ push(atos); __ jmp(L);
1744 1747 bep = cep = sep = // fall through
1745 1748 iep = __ pc(); __ push(itos); // fall through
1746 1749 vep = __ pc(); __ bind(L); // fall through
1747 1750 generate_and_dispatch(t);
1748 1751 }
1749 1752
1750 1753 //------------------------------------------------------------------------------------------------------------------------
1751 1754 // Generation of individual instructions
1752 1755
1753 1756 // helpers for generate_and_dispatch
1754 1757
1755 1758
1756 1759
1757 1760 InterpreterGenerator::InterpreterGenerator(StubQueue* code)
1758 1761 : TemplateInterpreterGenerator(code) {
1759 1762 generate_all(); // down here so it can be "virtual"
1760 1763 }
1761 1764
1762 1765 //------------------------------------------------------------------------------------------------------------------------
1763 1766
1764 1767 // Non-product code
1765 1768 #ifndef PRODUCT
1766 1769 address TemplateInterpreterGenerator::generate_trace_code(TosState state) {
1767 1770 address entry = __ pc();
1768 1771
1769 1772 // prepare expression stack
1770 1773 __ pop(rcx); // pop return address so expression stack is 'pure'
1771 1774 __ push(state); // save tosca
1772 1775
1773 1776 // pass tosca registers as arguments & call tracer
1774 1777 __ call_VM(noreg, CAST_FROM_FN_PTR(address, SharedRuntime::trace_bytecode), rcx, rax, rdx);
1775 1778 __ mov(rcx, rax); // make sure return address is not destroyed by pop(state)
1776 1779 __ pop(state); // restore tosca
1777 1780
1778 1781 // return
1779 1782 __ jmp(rcx);
1780 1783
1781 1784 return entry;
1782 1785 }
1783 1786
1784 1787
1785 1788 void TemplateInterpreterGenerator::count_bytecode() {
1786 1789 __ incrementl(ExternalAddress((address) &BytecodeCounter::_counter_value));
1787 1790 }
1788 1791
1789 1792
1790 1793 void TemplateInterpreterGenerator::histogram_bytecode(Template* t) {
1791 1794 __ incrementl(ExternalAddress((address) &BytecodeHistogram::_counters[t->bytecode()]));
1792 1795 }
1793 1796
1794 1797
1795 1798 void TemplateInterpreterGenerator::histogram_bytecode_pair(Template* t) {
1796 1799 __ mov32(ExternalAddress((address) &BytecodePairHistogram::_index), rbx);
1797 1800 __ shrl(rbx, BytecodePairHistogram::log2_number_of_codes);
1798 1801 __ orl(rbx, ((int)t->bytecode()) << BytecodePairHistogram::log2_number_of_codes);
1799 1802 ExternalAddress table((address) BytecodePairHistogram::_counters);
1800 1803 Address index(noreg, rbx, Address::times_4);
1801 1804 __ incrementl(ArrayAddress(table, index));
1802 1805 }
1803 1806
1804 1807
1805 1808 void TemplateInterpreterGenerator::trace_bytecode(Template* t) {
1806 1809 // Call a little run-time stub to avoid blow-up for each bytecode.
1807 1810 // The run-time runtime saves the right registers, depending on
1808 1811 // the tosca in-state for the given template.
1809 1812 assert(Interpreter::trace_code(t->tos_in()) != NULL,
1810 1813 "entry must have been generated");
1811 1814 __ call(RuntimeAddress(Interpreter::trace_code(t->tos_in())));
1812 1815 }
1813 1816
1814 1817
1815 1818 void TemplateInterpreterGenerator::stop_interpreter_at() {
1816 1819 Label L;
1817 1820 __ cmp32(ExternalAddress((address) &BytecodeCounter::_counter_value),
1818 1821 StopInterpreterAt);
1819 1822 __ jcc(Assembler::notEqual, L);
1820 1823 __ int3();
1821 1824 __ bind(L);
1822 1825 }
1823 1826 #endif // !PRODUCT
1824 1827 #endif // CC_INTERP
↓ open down ↓ |
323 lines elided |
↑ open up ↑ |
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX