--- old/make/CopyFiles.gmk 2014-07-28 21:52:27.000000000 +0800
+++ new/make/CopyFiles.gmk 2014-07-28 21:52:26.000000000 +0800
@@ -340,30 +340,6 @@
##########################################################################################
-PROPS_SRC := $(JDK_TOPDIR)/src/share/lib/security/java.security-$(OPENJDK_TARGET_OS)
-PROPS_DST := $(JDK_OUTPUTDIR)/lib/security/java.security
-
-ifndef OPENJDK
-
-RESTRICTED_PKGS_SRC := $(JDK_TOPDIR)/src/closed/share/lib/security/restricted.pkgs
-RESTRICTED_PKGS := $(shell $(CAT) $(RESTRICTED_PKGS_SRC) | $(TR) "\n" " ")
-
-$(PROPS_DST): $(PROPS_SRC)
- $(MKDIR) -p $(@D)
- $(TOOL_ADDTORESTRICTEDPKGS) $^ $@.tmp $(RESTRICTED_PKGS)
- $(MV) $@.tmp $@
-
-else
-
-$(PROPS_DST): $(PROPS_SRC)
- $(call install-file)
-
-endif
-
-COPY_FILES += $(PROPS_DST)
-
-##########################################################################################
-
POLICY_SRC := $(JDK_TOPDIR)/src/share/lib/security/java.policy
POLICY_DST := $(JDK_OUTPUTDIR)/lib/security/java.policy
--- old/make/GenerateData.gmk 2014-07-28 21:52:29.000000000 +0800
+++ new/make/GenerateData.gmk 2014-07-28 21:52:28.000000000 +0800
@@ -53,6 +53,9 @@
include gendata/GendataBlacklistedCerts.gmk
GENDATA += $(GENDATA_BLACKLISTED_CERTS)
+include gendata/GendataJavaSecurity.gmk
+GENDATA += $(GENDATA_JAVA_SECURITY)
+
##########################################################################################
GENDATA_UNINAME := $(JDK_OUTPUTDIR)/classes/java/lang/uniName.dat
--- old/make/Tools.gmk 2014-07-28 21:52:31.000000000 +0800
+++ new/make/Tools.gmk 2014-07-28 21:52:31.000000000 +0800
@@ -90,6 +90,9 @@
TOOL_BLACKLISTED_CERTS = $(JAVA_SMALL) -cp $(JDK_OUTPUTDIR)/btclasses \
build.tools.blacklistedcertsconverter.BlacklistedCertsConverter
+TOOL_MAKEJAVASECURITY = $(JAVA_SMALL) -cp $(JDK_OUTPUTDIR)/btclasses \
+ build.tools.makejavasecurity.MakeJavaSecurity
+
# TODO: There are references to the jdwpgen.jar in jdk/make/netbeans/jdwpgen/build.xml
# and nbproject/project.properties in the same dir. Needs to be looked at.
@@ -121,9 +124,6 @@
-cp $(JDK_OUTPUTDIR)/btclasses:$(JDK_OUTPUTDIR) \
build.tools.deps.CheckDeps
-TOOL_ADDTORESTRICTEDPKGS = $(JAVA_SMALL) -cp $(JDK_OUTPUTDIR)/btclasses \
- build.tools.addtorestrictedpkgs.AddToRestrictedPkgs
-
##########################################################################################
# Tools needed on solaris because OBJCOPY is broken.
--- old/test/java/lang/SecurityManager/CheckPackageAccess.java 2014-07-28 21:52:33.000000000 +0800
+++ new/test/java/lang/SecurityManager/CheckPackageAccess.java 2014-07-28 21:52:33.000000000 +0800
@@ -92,8 +92,6 @@
String osName = System.getProperty("os.name");
if (osName.contains("OS X")) {
pkgs.add("apple."); // add apple package for OS X
- } else if (osName.startsWith("Windows")) {
- pkgs.add("com.sun.java.accessibility.");
}
List<String> jspkgs =
--- /dev/null 2014-07-28 21:52:36.000000000 +0800
+++ new/make/gendata/GendataJavaSecurity.gmk 2014-07-28 21:52:35.000000000 +0800
@@ -0,0 +1,38 @@
+ #
+# Copyright (c) 2014, Oracle and/or its affiliates. All rights reserved.
+# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+#
+# This code is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License version 2 only, as
+# published by the Free Software Foundation. Oracle designates this
+# particular file as subject to the "Classpath" exception as provided
+# by Oracle in the LICENSE file that accompanied this code.
+#
+# This code is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+# version 2 for more details (a copy is included in the LICENSE file that
+# accompanied this code).
+#
+# You should have received a copy of the GNU General Public License version
+# 2 along with this work; if not, write to the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
+# or visit www.oracle.com if you need additional information or have any
+# questions.
+#
+
+GENDATA_JAVA_SECURITY_SRC := $(JDK_TOPDIR)/src/share/lib/security/java.security
+GENDATA_JAVA_SECURITY := $(JDK_OUTPUTDIR)/lib/security/java.security
+
+ifndef OPENJDK
+ RESTRICTED_PKGS_SRC := $(JDK_TOPDIR)/src/closed/share/lib/security/restricted.pkgs
+else
+ RESTRICTED_PKGS_SRC :=
+endif
+
+$(GENDATA_JAVA_SECURITY): $(BUILD_TOOLS) $(GENDATA_JAVA_SECURITY_SRC) $(RESTRICTED_PKGS_SRC)
+ $(ECHO) "Generating java.security"
+ $(MKDIR) -p $(@D)
+ $(TOOL_MAKEJAVASECURITY) $(GENDATA_JAVA_SECURITY_SRC) $@ $(OPENJDK_TARGET_OS) $(RESTRICTED_PKGS_SRC) || exit 1
--- old/make/src/classes/build/tools/addtorestrictedpkgs/AddToRestrictedPkgs.java 2014-07-28 21:52:38.000000000 +0800
+++ /dev/null 2014-07-28 21:52:38.000000000 +0800
@@ -1,105 +0,0 @@
-/*
- * Copyright (c) 2013, Oracle and/or its affiliates. All rights reserved.
- * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
- *
- * This code is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 only, as
- * published by the Free Software Foundation. Oracle designates this
- * particular file as subject to the "Classpath" exception as provided
- * by Oracle in the LICENSE file that accompanied this code.
- *
- * This code is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * version 2 for more details (a copy is included in the LICENSE file that
- * accompanied this code).
- *
- * You should have received a copy of the GNU General Public License version
- * 2 along with this work; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
- * or visit www.oracle.com if you need additional information or have any
- * questions.
- */
-
-package build.tools.addtorestrictedpkgs;
-
-import java.io.*;
-
-/**
- * Adds additional packages to the package.access and package.definition
- * security properties.
- */
-public class AddToRestrictedPkgs {
-
- private static final String PKG_ACC = "package.access";
- private static final String PKG_DEF = "package.definition";
- private static final int PKG_ACC_INDENT = 15;
- private static final int PKG_DEF_INDENT = 19;
-
- public static void main(String[] args) throws Exception {
-
- if (args.length < 3) {
- System.err.println("Usage: java AddToRestrictedPkgs " +
- "[input java.security file name] " +
- "[output java.security file name] " +
- "[packages ...]");
- System.exit(1);
- }
-
- try (FileReader fr = new FileReader(args[0]);
- BufferedReader br = new BufferedReader(fr);
- FileWriter fw = new FileWriter(args[1]);
- BufferedWriter bw = new BufferedWriter(fw))
- {
- // parse the file line-by-line, looking for pkg access properties
- String line = br.readLine();
- while (line != null) {
- if (line.startsWith(PKG_ACC)) {
- writePackages(br, bw, line, PKG_ACC_INDENT, args);
- } else if (line.startsWith(PKG_DEF)) {
- writePackages(br, bw, line, PKG_DEF_INDENT, args);
- } else {
- writeLine(bw, line);
- }
- line = br.readLine();
- }
- bw.flush();
- }
- }
-
- private static void writePackages(BufferedReader br, BufferedWriter bw,
- String line, int numSpaces,
- String[] args) throws IOException {
- // parse property until EOL, not including line breaks
- while (line.endsWith("\\")) {
- writeLine(bw, line);
- line = br.readLine();
- }
- // append comma and line-break to last package
- writeLine(bw, line + ",\\");
- // add new packages, one per line
- for (int i = 2; i < args.length - 1; i++) {
- indent(bw, numSpaces);
- writeLine(bw, args[i] + ",\\");
- }
- indent(bw, numSpaces);
- writeLine(bw, args[args.length - 1]);
- }
-
- private static void writeLine(BufferedWriter bw, String line)
- throws IOException
- {
- bw.write(line);
- bw.newLine();
- }
-
- private static void indent(BufferedWriter bw, int numSpaces)
- throws IOException
- {
- for (int i = 0; i < numSpaces; i++) {
- bw.append(' ');
- }
- }
-}
--- /dev/null 2014-07-28 21:52:38.000000000 +0800
+++ new/make/src/classes/build/tools/makejavasecurity/MakeJavaSecurity.java 2014-07-28 21:52:38.000000000 +0800
@@ -0,0 +1,168 @@
+/*
+ * Copyright (c) 2013, 2014, Oracle and/or its affiliates. All rights reserved.
+ * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+ *
+ * This code is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 only, as
+ * published by the Free Software Foundation. Oracle designates this
+ * particular file as subject to the "Classpath" exception as provided
+ * by Oracle in the LICENSE file that accompanied this code.
+ *
+ * This code is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * version 2 for more details (a copy is included in the LICENSE file that
+ * accompanied this code).
+ *
+ * You should have received a copy of the GNU General Public License version
+ * 2 along with this work; if not, write to the Free Software Foundation,
+ * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
+ * or visit www.oracle.com if you need additional information or have any
+ * questions.
+ */
+
+package build.tools.makejavasecurity;
+
+import java.io.*;
+import java.nio.file.Files;
+import java.nio.file.Paths;
+import java.util.*;
+
+/**
+ * Builds the java.security file, including
+ *
+ * 1. Adds additional packages to the package.access and
+ * package.definition security properties.
+ * 2. Filter out platform-unrelated parts
+ *
+ * In order to easily maintain platform-related entries, every item
+ * (including the last line) in package.access and package.definition
+ * MUST end with ',\'. A blank line MUST exist after the last line.
+ */
+public class MakeJavaSecurity {
+
+ private static final String PKG_ACC = "package.access";
+ private static final String PKG_DEF = "package.definition";
+ private static final int PKG_ACC_INDENT = 15;
+ private static final int PKG_DEF_INDENT = 19;
+
+ public static void main(String[] args) throws Exception {
+
+ if (args.length < 3) {
+ System.err.println("Usage: java MakeJavaSecurity " +
+ "[input java.security file name] " +
+ "[output java.security file name] " +
+ "[openjdk target os] " +
+ "[more restricted packages file name?]");
+ System.exit(1);
+ }
+
+ // more restricted packages
+ List<String> extraLines;
+ if (args.length == 4) {
+ extraLines = Files.readAllLines(Paths.get(args[3]));
+ } else {
+ extraLines = Collections.emptyList();
+ }
+
+ List<String> lines = new ArrayList<>();
+
+ // read raw java.security and add more restricted packages
+ try (FileReader fr = new FileReader(args[0]);
+ BufferedReader br = new BufferedReader(fr)) {
+ // looking for pkg access properties
+ String line = br.readLine();
+ while (line != null) {
+ if (line.startsWith(PKG_ACC)) {
+ addPackages(br, lines, line, PKG_ACC_INDENT, extraLines);
+ } else if (line.startsWith(PKG_DEF)) {
+ addPackages(br, lines, line, PKG_DEF_INDENT, extraLines);
+ } else {
+ lines.add(line);
+ }
+ line = br.readLine();
+ }
+ }
+
+ // Filter out platform-unrelated ones. We only support
+ // #ifdef, #ifndef, and #endif.
+ int mode = 0; // 0: out of block, 1: in match, 2: in non-match
+ Iterator<String> iter = lines.iterator();
+ while (iter.hasNext()) {
+ String line = iter.next();
+ if (line.startsWith("#endif")) {
+ mode = 0;
+ iter.remove();
+ } else if (line.startsWith("#ifdef ")) {
+ mode = line.endsWith(args[2])?1:2;
+ iter.remove();
+ } else if (line.startsWith("#ifndef ")) {
+ mode = line.endsWith(args[2])?2:1;
+ iter.remove();
+ } else {
+ if (mode == 2) iter.remove();
+ }
+ }
+
+ // Update .tbd to .1, .2, etc.
+ Map<String,Integer> count = new HashMap<>();
+ for (int i=0; i<lines.size(); i++) {
+ String line = lines.get(i);
+ int index = line.indexOf(".tbd");
+ if (index >= 0) {
+ String prefix = line.substring(0, index);
+ int n = count.getOrDefault(prefix, 1);
+ count.put(prefix, n+1);
+ lines.set(i, prefix + "." + n + line.substring(index+4));
+ }
+ }
+
+ // Clean up the last line of PKG_ACC and PKG_DEF blocks.
+ // Not really necessary since a blank line follows.
+ boolean inBlock = false;
+ for (int i=0; i<lines.size(); i++) {
+ String line = lines.get(i);
+ if (line.startsWith(PKG_ACC) || line.startsWith(PKG_DEF)) {
+ inBlock = true;
+ }
+ if (inBlock) {
+ if (line.isEmpty()) {
+ String lastLine = lines.get(i-1);
+ lines.set(i-1, lastLine.substring(0, lastLine.length()-2));
+ inBlock = false;
+ }
+ }
+ }
+
+ Files.write(Paths.get(args[1]), lines);
+ }
+
+ private static void addPackages(BufferedReader br, List<String> lines,
+ String line, int numSpaces,
+ List<String> args) throws IOException {
+ // parse property until EOL, not including line breaks
+ boolean first = true;
+ while (!line.isEmpty()) {
+ if (!line.startsWith("#")) {
+ if (!line.endsWith(",\\") ||
+ (!first && line.contains("="))) {
+ throw new IOException("Invalid line: " + line);
+ }
+ }
+ lines.add(line);
+ line = br.readLine();
+ first = false;
+ }
+ // add new packages, one per line
+ for (String arg: args) {
+ if (arg.startsWith("#")) {
+ lines.add(arg);
+ } else {
+ lines.add(String.format("%"+numSpaces+"s", "") + arg + ",\\");
+ }
+ }
+ lines.add(line);
+ }
+}
--- old/src/share/lib/security/java.security-solaris 2014-07-28 21:52:40.000000000 +0800
+++ /dev/null 2014-07-28 21:52:41.000000000 +0800
@@ -1,498 +0,0 @@
-#
-# This is the "master security properties file".
-#
-# An alternate java.security properties file may be specified
-# from the command line via the system property
-#
-# -Djava.security.properties=<URL>
-#
-# This properties file appends to the master security properties file.
-# If both properties files specify values for the same key, the value
-# from the command-line properties file is selected, as it is the last
-# one loaded.
-#
-# Also, if you specify
-#
-# -Djava.security.properties==<URL> (2 equals),
-#
-# then that properties file completely overrides the master security
-# properties file.
-#
-# To disable the ability to specify an additional properties file from
-# the command line, set the key security.overridePropertiesFile
-# to false in the master security properties file. It is set to true
-# by default.
-
-# In this file, various security properties are set for use by
-# java.security classes. This is where users can statically register
-# Cryptography Package Providers ("providers" for short). The term
-# "provider" refers to a package or set of packages that supply a
-# concrete implementation of a subset of the cryptography aspects of
-# the Java Security API. A provider may, for example, implement one or
-# more digital signature algorithms or message digest algorithms.
-#
-# Each provider must implement a subclass of the Provider class.
-# To register a provider in this master security properties file,
-# specify the Provider subclass name and priority in the format
-#
-# security.provider.<n>=<className>
-#
-# This declares a provider, and specifies its preference
-# order n. The preference order is the order in which providers are
-# searched for requested algorithms (when no specific provider is
-# requested). The order is 1-based; 1 is the most preferred, followed
-# by 2, and so on.
-#
-# <className> must specify the subclass of the Provider class whose
-# constructor sets the values of various properties that are required
-# for the Java Security API to look up the algorithms or other
-# facilities implemented by the provider.
-#
-# There must be at least one provider specification in java.security.
-# There is a default provider that comes standard with the JDK. It
-# is called the "SUN" provider, and its Provider subclass
-# named Sun appears in the sun.security.provider package. Thus, the
-# "SUN" provider is registered via the following:
-#
-# security.provider.1=sun.security.provider.Sun
-#
-# (The number 1 is used for the default provider.)
-#
-# Note: Providers can be dynamically registered instead by calls to
-# either the addProvider or insertProviderAt method in the Security
-# class.
-
-#
-# List of providers and their preference orders (see above):
-#
-security.provider.1=com.oracle.security.ucrypto.UcryptoProvider ${java.home}/lib/security/ucrypto-solaris.cfg
-security.provider.2=sun.security.pkcs11.SunPKCS11 ${java.home}/lib/security/sunpkcs11-solaris.cfg
-security.provider.3=sun.security.provider.Sun
-security.provider.4=sun.security.rsa.SunRsaSign
-security.provider.5=sun.security.ec.SunEC
-security.provider.6=com.sun.net.ssl.internal.ssl.Provider
-security.provider.7=com.sun.crypto.provider.SunJCE
-security.provider.8=sun.security.jgss.SunProvider
-security.provider.9=com.sun.security.sasl.Provider
-security.provider.10=org.jcp.xml.dsig.internal.dom.XMLDSigRI
-security.provider.11=sun.security.smartcardio.SunPCSC
-
-#
-# Sun Provider SecureRandom seed source.
-#
-# Select the primary source of seed data for the "SHA1PRNG" and
-# "NativePRNG" SecureRandom implementations in the "Sun" provider.
-# (Other SecureRandom implementations might also use this property.)
-#
-# On Unix-like systems (for example, Solaris/Linux/MacOS), the
-# "NativePRNG" and "SHA1PRNG" implementations obtains seed data from
-# special device files such as file:/dev/random.
-#
-# On Windows systems, specifying the URLs "file:/dev/random" or
-# "file:/dev/urandom" will enable the native Microsoft CryptoAPI seeding
-# mechanism for SHA1PRNG.
-#
-# By default, an attempt is made to use the entropy gathering device
-# specified by the "securerandom.source" Security property. If an
-# exception occurs while accessing the specified URL:
-#
-# SHA1PRNG:
-# the traditional system/thread activity algorithm will be used.
-#
-# NativePRNG:
-# a default value of /dev/random will be used. If neither
-# are available, the implementation will be disabled.
-# "file" is the only currently supported protocol type.
-#
-# The entropy gathering device can also be specified with the System
-# property "java.security.egd". For example:
-#
-# % java -Djava.security.egd=file:/dev/random MainClass
-#
-# Specifying this System property will override the
-# "securerandom.source" Security property.
-#
-# In addition, if "file:/dev/random" or "file:/dev/urandom" is
-# specified, the "NativePRNG" implementation will be more preferred than
-# SHA1PRNG in the Sun provider.
-#
-securerandom.source=file:/dev/random
-
-#
-# A list of known strong SecureRandom implementations.
-#
-# To help guide applications in selecting a suitable strong
-# java.security.SecureRandom implementation, Java distributions should
-# indicate a list of known strong implementations using the property.
-#
-# This is a comma-separated list of algorithm and/or algorithm:provider
-# entries.
-#
-securerandom.strongAlgorithms=NativePRNGBlocking:SUN
-
-#
-# Class to instantiate as the javax.security.auth.login.Configuration
-# provider.
-#
-login.configuration.provider=sun.security.provider.ConfigFile
-
-#
-# Default login configuration file
-#
-#login.config.url.1=file:${user.home}/.java.login.config
-
-#
-# Class to instantiate as the system Policy. This is the name of the class
-# that will be used as the Policy object.
-#
-policy.provider=sun.security.provider.PolicyFile
-
-# The default is to have a single system-wide policy file,
-# and a policy file in the user's home directory.
-policy.url.1=file:${java.home}/lib/security/java.policy
-policy.url.2=file:${user.home}/.java.policy
-
-# whether or not we expand properties in the policy file
-# if this is set to false, properties (${...}) will not be expanded in policy
-# files.
-policy.expandProperties=true
-
-# whether or not we allow an extra policy to be passed on the command line
-# with -Djava.security.policy=somefile. Comment out this line to disable
-# this feature.
-policy.allowSystemProperty=true
-
-# whether or not we look into the IdentityScope for trusted Identities
-# when encountering a 1.1 signed JAR file. If the identity is found
-# and is trusted, we grant it AllPermission.
-policy.ignoreIdentityScope=false
-
-#
-# Default keystore type.
-#
-keystore.type=jks
-
-#
-# List of comma-separated packages that start with or equal this string
-# will cause a security exception to be thrown when
-# passed to checkPackageAccess unless the
-# corresponding RuntimePermission ("accessClassInPackage."+package) has
-# been granted.
-package.access=sun.,\
- com.sun.xml.internal.,\
- com.sun.imageio.,\
- com.sun.istack.internal.,\
- com.sun.jmx.,\
- com.sun.media.sound.,\
- com.sun.naming.internal.,\
- com.sun.proxy.,\
- com.sun.corba.se.,\
- com.sun.org.apache.bcel.internal.,\
- com.sun.org.apache.regexp.internal.,\
- com.sun.org.apache.xerces.internal.,\
- com.sun.org.apache.xpath.internal.,\
- com.sun.org.apache.xalan.internal.extensions.,\
- com.sun.org.apache.xalan.internal.lib.,\
- com.sun.org.apache.xalan.internal.res.,\
- com.sun.org.apache.xalan.internal.templates.,\
- com.sun.org.apache.xalan.internal.utils.,\
- com.sun.org.apache.xalan.internal.xslt.,\
- com.sun.org.apache.xalan.internal.xsltc.cmdline.,\
- com.sun.org.apache.xalan.internal.xsltc.compiler.,\
- com.sun.org.apache.xalan.internal.xsltc.trax.,\
- com.sun.org.apache.xalan.internal.xsltc.util.,\
- com.sun.org.apache.xml.internal.res.,\
- com.sun.org.apache.xml.internal.security.,\
- com.sun.org.apache.xml.internal.serializer.utils.,\
- com.sun.org.apache.xml.internal.utils.,\
- com.sun.org.glassfish.,\
- com.oracle.xmlns.internal.,\
- com.oracle.webservices.internal.,\
- org.jcp.xml.dsig.internal.,\
- jdk.internal.,\
- jdk.nashorn.internal.,\
- jdk.nashorn.tools.,\
- com.sun.activation.registries.
-
-#
-# List of comma-separated packages that start with or equal this string
-# will cause a security exception to be thrown when
-# passed to checkPackageDefinition unless the
-# corresponding RuntimePermission ("defineClassInPackage."+package) has
-# been granted.
-#
-# by default, none of the class loaders supplied with the JDK call
-# checkPackageDefinition.
-#
-package.definition=sun.,\
- com.sun.xml.internal.,\
- com.sun.imageio.,\
- com.sun.istack.internal.,\
- com.sun.jmx.,\
- com.sun.media.sound.,\
- com.sun.naming.internal.,\
- com.sun.proxy.,\
- com.sun.corba.se.,\
- com.sun.org.apache.bcel.internal.,\
- com.sun.org.apache.regexp.internal.,\
- com.sun.org.apache.xerces.internal.,\
- com.sun.org.apache.xpath.internal.,\
- com.sun.org.apache.xalan.internal.extensions.,\
- com.sun.org.apache.xalan.internal.lib.,\
- com.sun.org.apache.xalan.internal.res.,\
- com.sun.org.apache.xalan.internal.templates.,\
- com.sun.org.apache.xalan.internal.utils.,\
- com.sun.org.apache.xalan.internal.xslt.,\
- com.sun.org.apache.xalan.internal.xsltc.cmdline.,\
- com.sun.org.apache.xalan.internal.xsltc.compiler.,\
- com.sun.org.apache.xalan.internal.xsltc.trax.,\
- com.sun.org.apache.xalan.internal.xsltc.util.,\
- com.sun.org.apache.xml.internal.res.,\
- com.sun.org.apache.xml.internal.security.,\
- com.sun.org.apache.xml.internal.serializer.utils.,\
- com.sun.org.apache.xml.internal.utils.,\
- com.sun.org.glassfish.,\
- com.oracle.xmlns.internal.,\
- com.oracle.webservices.internal.,\
- org.jcp.xml.dsig.internal.,\
- jdk.internal.,\
- jdk.nashorn.internal.,\
- jdk.nashorn.tools.,\
- com.sun.activation.registries.
-
-#
-# Determines whether this properties file can be appended to
-# or overridden on the command line via -Djava.security.properties
-#
-security.overridePropertiesFile=true
-
-#
-# Determines the default key and trust manager factory algorithms for
-# the javax.net.ssl package.
-#
-ssl.KeyManagerFactory.algorithm=SunX509
-ssl.TrustManagerFactory.algorithm=PKIX
-
-#
-# The Java-level namelookup cache policy for successful lookups:
-#
-# any negative value: caching forever
-# any positive value: the number of seconds to cache an address for
-# zero: do not cache
-#
-# default value is forever (FOREVER). For security reasons, this
-# caching is made forever when a security manager is set. When a security
-# manager is not set, the default behavior in this implementation
-# is to cache for 30 seconds.
-#
-# NOTE: setting this to anything other than the default value can have
-# serious security implications. Do not set it unless
-# you are sure you are not exposed to DNS spoofing attack.
-#
-#networkaddress.cache.ttl=-1
-
-# The Java-level namelookup cache policy for failed lookups:
-#
-# any negative value: cache forever
-# any positive value: the number of seconds to cache negative lookup results
-# zero: do not cache
-#
-# In some Microsoft Windows networking environments that employ
-# the WINS name service in addition to DNS, name service lookups
-# that fail may take a noticeably long time to return (approx. 5 seconds).
-# For this reason the default caching policy is to maintain these
-# results for 10 seconds.
-#
-#
-networkaddress.cache.negative.ttl=10
-
-#
-# Properties to configure OCSP for certificate revocation checking
-#
-
-# Enable OCSP
-#
-# By default, OCSP is not used for certificate revocation checking.
-# This property enables the use of OCSP when set to the value "true".
-#
-# NOTE: SocketPermission is required to connect to an OCSP responder.
-#
-# Example,
-# ocsp.enable=true
-
-#
-# Location of the OCSP responder
-#
-# By default, the location of the OCSP responder is determined implicitly
-# from the certificate being validated. This property explicitly specifies
-# the location of the OCSP responder. The property is used when the
-# Authority Information Access extension (defined in RFC 3280) is absent
-# from the certificate or when it requires overriding.
-#
-# Example,
-# ocsp.responderURL=http://ocsp.example.net:80
-
-#
-# Subject name of the OCSP responder's certificate
-#
-# By default, the certificate of the OCSP responder is that of the issuer
-# of the certificate being validated. This property identifies the certificate
-# of the OCSP responder when the default does not apply. Its value is a string
-# distinguished name (defined in RFC 2253) which identifies a certificate in
-# the set of certificates supplied during cert path validation. In cases where
-# the subject name alone is not sufficient to uniquely identify the certificate
-# then both the "ocsp.responderCertIssuerName" and
-# "ocsp.responderCertSerialNumber" properties must be used instead. When this
-# property is set then those two properties are ignored.
-#
-# Example,
-# ocsp.responderCertSubjectName="CN=OCSP Responder, O=XYZ Corp"
-
-#
-# Issuer name of the OCSP responder's certificate
-#
-# By default, the certificate of the OCSP responder is that of the issuer
-# of the certificate being validated. This property identifies the certificate
-# of the OCSP responder when the default does not apply. Its value is a string
-# distinguished name (defined in RFC 2253) which identifies a certificate in
-# the set of certificates supplied during cert path validation. When this
-# property is set then the "ocsp.responderCertSerialNumber" property must also
-# be set. When the "ocsp.responderCertSubjectName" property is set then this
-# property is ignored.
-#
-# Example,
-# ocsp.responderCertIssuerName="CN=Enterprise CA, O=XYZ Corp"
-
-#
-# Serial number of the OCSP responder's certificate
-#
-# By default, the certificate of the OCSP responder is that of the issuer
-# of the certificate being validated. This property identifies the certificate
-# of the OCSP responder when the default does not apply. Its value is a string
-# of hexadecimal digits (colon or space separators may be present) which
-# identifies a certificate in the set of certificates supplied during cert path
-# validation. When this property is set then the "ocsp.responderCertIssuerName"
-# property must also be set. When the "ocsp.responderCertSubjectName" property
-# is set then this property is ignored.
-#
-# Example,
-# ocsp.responderCertSerialNumber=2A:FF:00
-
-#
-# Policy for failed Kerberos KDC lookups:
-#
-# When a KDC is unavailable (network error, service failure, etc), it is
-# put inside a blacklist and accessed less often for future requests. The
-# value (case-insensitive) for this policy can be:
-#
-# tryLast
-# KDCs in the blacklist are always tried after those not on the list.
-#
-# tryLess[:max_retries,timeout]
-# KDCs in the blacklist are still tried by their order in the configuration,
-# but with smaller max_retries and timeout values. max_retries and timeout
-# are optional numerical parameters (default 1 and 5000, which means once
-# and 5 seconds). Please notes that if any of the values defined here is
-# more than what is defined in krb5.conf, it will be ignored.
-#
-# Whenever a KDC is detected as available, it is removed from the blacklist.
-# The blacklist is reset when krb5.conf is reloaded. You can add
-# refreshKrb5Config=true to a JAAS configuration file so that krb5.conf is
-# reloaded whenever a JAAS authentication is attempted.
-#
-# Example,
-# krb5.kdc.bad.policy = tryLast
-# krb5.kdc.bad.policy = tryLess:2,2000
-krb5.kdc.bad.policy = tryLast
-
-# Algorithm restrictions for certification path (CertPath) processing
-#
-# In some environments, certain algorithms or key lengths may be undesirable
-# for certification path building and validation. For example, "MD2" is
-# generally no longer considered to be a secure hash algorithm. This section
-# describes the mechanism for disabling algorithms based on algorithm name
-# and/or key length. This includes algorithms used in certificates, as well
-# as revocation information such as CRLs and signed OCSP Responses.
-#
-# The syntax of the disabled algorithm string is described as this Java
-# BNF-style:
-# DisabledAlgorithms:
-# " DisabledAlgorithm { , DisabledAlgorithm } "
-#
-# DisabledAlgorithm:
-# AlgorithmName [Constraint]
-#
-# AlgorithmName:
-# (see below)
-#
-# Constraint:
-# KeySizeConstraint
-#
-# KeySizeConstraint:
-# keySize Operator DecimalInteger
-#
-# Operator:
-# <= | < | == | != | >= | >
-#
-# DecimalInteger:
-# DecimalDigits
-#
-# DecimalDigits:
-# DecimalDigit {DecimalDigit}
-#
-# DecimalDigit: one of
-# 1 2 3 4 5 6 7 8 9 0
-#
-# The "AlgorithmName" is the standard algorithm name of the disabled
-# algorithm. See "Java Cryptography Architecture Standard Algorithm Name
-# Documentation" for information about Standard Algorithm Names. Matching
-# is performed using a case-insensitive sub-element matching rule. (For
-# example, in "SHA1withECDSA" the sub-elements are "SHA1" for hashing and
-# "ECDSA" for signatures.) If the assertion "AlgorithmName" is a
-# sub-element of the certificate algorithm name, the algorithm will be
-# rejected during certification path building and validation. For example,
-# the assertion algorithm name "DSA" will disable all certificate algorithms
-# that rely on DSA, such as NONEwithDSA, SHA1withDSA. However, the assertion
-# will not disable algorithms related to "ECDSA".
-#
-# A "Constraint" provides further guidance for the algorithm being specified.
-# The "KeySizeConstraint" requires a key of a valid size range if the
-# "AlgorithmName" is of a key algorithm. The "DecimalInteger" indicates the
-# key size specified in number of bits. For example, "RSA keySize <= 1024"
-# indicates that any RSA key with key size less than or equal to 1024 bits
-# should be disabled, and "RSA keySize < 1024, RSA keySize > 2048" indicates
-# that any RSA key with key size less than 1024 or greater than 2048 should
-# be disabled. Note that the "KeySizeConstraint" only makes sense to key
-# algorithms.
-#
-# Note: This property is currently used by Oracle's PKIX implementation. It
-# is not guaranteed to be examined and used by other implementations.
-#
-# Example:
-# jdk.certpath.disabledAlgorithms=MD2, DSA, RSA keySize < 2048
-#
-#
-jdk.certpath.disabledAlgorithms=MD2, MD5, RSA keySize < 1024
-
-# Algorithm restrictions for Secure Socket Layer/Transport Layer Security
-# (SSL/TLS) processing
-#
-# In some environments, certain algorithms or key lengths may be undesirable
-# when using SSL/TLS. This section describes the mechanism for disabling
-# algorithms during SSL/TLS security parameters negotiation, including cipher
-# suites selection, peer authentication and key exchange mechanisms.
-#
-# For PKI-based peer authentication and key exchange mechanisms, this list
-# of disabled algorithms will also be checked during certification path
-# building and validation, including algorithms used in certificates, as
-# well as revocation information such as CRLs and signed OCSP Responses.
-# This is in addition to the jdk.certpath.disabledAlgorithms property above.
-#
-# See the specification of "jdk.certpath.disabledAlgorithms" for the
-# syntax of the disabled algorithm string.
-#
-# Note: This property is currently used by Oracle's JSSE implementation.
-# It is not guaranteed to be examined and used by other implementations.
-#
-# Example:
-# jdk.tls.disabledAlgorithms=MD5, SHA1, DSA, RSA keySize < 2048
--- /dev/null 2014-07-28 21:52:41.000000000 +0800
+++ new/src/share/lib/security/java.security 2014-07-28 21:52:40.000000000 +0800
@@ -0,0 +1,517 @@
+#
+# This is the "master security properties file".
+#
+# An alternate java.security properties file may be specified
+# from the command line via the system property
+#
+# -Djava.security.properties=<URL>
+#
+# This properties file appends to the master security properties file.
+# If both properties files specify values for the same key, the value
+# from the command-line properties file is selected, as it is the last
+# one loaded.
+#
+# Also, if you specify
+#
+# -Djava.security.properties==<URL> (2 equals),
+#
+# then that properties file completely overrides the master security
+# properties file.
+#
+# To disable the ability to specify an additional properties file from
+# the command line, set the key security.overridePropertiesFile
+# to false in the master security properties file. It is set to true
+# by default.
+
+# In this file, various security properties are set for use by
+# java.security classes. This is where users can statically register
+# Cryptography Package Providers ("providers" for short). The term
+# "provider" refers to a package or set of packages that supply a
+# concrete implementation of a subset of the cryptography aspects of
+# the Java Security API. A provider may, for example, implement one or
+# more digital signature algorithms or message digest algorithms.
+#
+# Each provider must implement a subclass of the Provider class.
+# To register a provider in this master security properties file,
+# specify the Provider subclass name and priority in the format
+#
+# security.provider.<n>=<className>
+#
+# This declares a provider, and specifies its preference
+# order n. The preference order is the order in which providers are
+# searched for requested algorithms (when no specific provider is
+# requested). The order is 1-based; 1 is the most preferred, followed
+# by 2, and so on.
+#
+# <className> must specify the subclass of the Provider class whose
+# constructor sets the values of various properties that are required
+# for the Java Security API to look up the algorithms or other
+# facilities implemented by the provider.
+#
+# There must be at least one provider specification in java.security.
+# There is a default provider that comes standard with the JDK. It
+# is called the "SUN" provider, and its Provider subclass
+# named Sun appears in the sun.security.provider package. Thus, the
+# "SUN" provider is registered via the following:
+#
+# security.provider.1=sun.security.provider.Sun
+#
+# (The number 1 is used for the default provider.)
+#
+# Note: Providers can be dynamically registered instead by calls to
+# either the addProvider or insertProviderAt method in the Security
+# class.
+
+#
+# List of providers and their preference orders (see above):
+#
+#ifdef solaris
+security.provider.tbd=com.oracle.security.ucrypto.UcryptoProvider ${java.home}/lib/security/ucrypto-solaris.cfg
+security.provider.tbd=sun.security.pkcs11.SunPKCS11 ${java.home}/lib/security/sunpkcs11-solaris.cfg
+#endif
+security.provider.tbd=sun.security.provider.Sun
+security.provider.tbd=sun.security.rsa.SunRsaSign
+security.provider.tbd=sun.security.ec.SunEC
+security.provider.tbd=com.sun.net.ssl.internal.ssl.Provider
+security.provider.tbd=com.sun.crypto.provider.SunJCE
+security.provider.tbd=sun.security.jgss.SunProvider
+security.provider.tbd=com.sun.security.sasl.Provider
+security.provider.tbd=org.jcp.xml.dsig.internal.dom.XMLDSigRI
+security.provider.tbd=sun.security.smartcardio.SunPCSC
+#ifdef windows
+security.provider.tbd=sun.security.mscapi.SunMSCAPI
+#endif
+#ifdef macosx
+security.provider.tbd=apple.security.AppleProvider
+#endif
+
+#
+# Sun Provider SecureRandom seed source.
+#
+# Select the primary source of seed data for the "SHA1PRNG" and
+# "NativePRNG" SecureRandom implementations in the "Sun" provider.
+# (Other SecureRandom implementations might also use this property.)
+#
+# On Unix-like systems (for example, Solaris/Linux/MacOS), the
+# "NativePRNG" and "SHA1PRNG" implementations obtains seed data from
+# special device files such as file:/dev/random.
+#
+# On Windows systems, specifying the URLs "file:/dev/random" or
+# "file:/dev/urandom" will enable the native Microsoft CryptoAPI seeding
+# mechanism for SHA1PRNG.
+#
+# By default, an attempt is made to use the entropy gathering device
+# specified by the "securerandom.source" Security property. If an
+# exception occurs while accessing the specified URL:
+#
+# SHA1PRNG:
+# the traditional system/thread activity algorithm will be used.
+#
+# NativePRNG:
+# a default value of /dev/random will be used. If neither
+# are available, the implementation will be disabled.
+# "file" is the only currently supported protocol type.
+#
+# The entropy gathering device can also be specified with the System
+# property "java.security.egd". For example:
+#
+# % java -Djava.security.egd=file:/dev/random MainClass
+#
+# Specifying this System property will override the
+# "securerandom.source" Security property.
+#
+# In addition, if "file:/dev/random" or "file:/dev/urandom" is
+# specified, the "NativePRNG" implementation will be more preferred than
+# SHA1PRNG in the Sun provider.
+#
+securerandom.source=file:/dev/random
+
+#
+# A list of known strong SecureRandom implementations.
+#
+# To help guide applications in selecting a suitable strong
+# java.security.SecureRandom implementation, Java distributions should
+# indicate a list of known strong implementations using the property.
+#
+# This is a comma-separated list of algorithm and/or algorithm:provider
+# entries.
+#
+#ifdef windows
+securerandom.strongAlgorithms=Windows-PRNG:SunMSCAPI,SHA1PRNG:SUN
+#endif
+#ifndef windows
+securerandom.strongAlgorithms=NativePRNGBlocking:SUN
+#endif
+
+#
+# Class to instantiate as the javax.security.auth.login.Configuration
+# provider.
+#
+login.configuration.provider=sun.security.provider.ConfigFile
+
+#
+# Default login configuration file
+#
+#login.config.url.1=file:${user.home}/.java.login.config
+
+#
+# Class to instantiate as the system Policy. This is the name of the class
+# that will be used as the Policy object.
+#
+policy.provider=sun.security.provider.PolicyFile
+
+# The default is to have a single system-wide policy file,
+# and a policy file in the user's home directory.
+policy.url.1=file:${java.home}/lib/security/java.policy
+policy.url.2=file:${user.home}/.java.policy
+
+# whether or not we expand properties in the policy file
+# if this is set to false, properties (${...}) will not be expanded in policy
+# files.
+policy.expandProperties=true
+
+# whether or not we allow an extra policy to be passed on the command line
+# with -Djava.security.policy=somefile. Comment out this line to disable
+# this feature.
+policy.allowSystemProperty=true
+
+# whether or not we look into the IdentityScope for trusted Identities
+# when encountering a 1.1 signed JAR file. If the identity is found
+# and is trusted, we grant it AllPermission.
+policy.ignoreIdentityScope=false
+
+#
+# Default keystore type.
+#
+keystore.type=jks
+
+#
+# List of comma-separated packages that start with or equal this string
+# will cause a security exception to be thrown when
+# passed to checkPackageAccess unless the
+# corresponding RuntimePermission ("accessClassInPackage."+package) has
+# been granted.
+package.access=sun.,\
+ com.sun.xml.internal.,\
+ com.sun.imageio.,\
+ com.sun.istack.internal.,\
+ com.sun.jmx.,\
+ com.sun.media.sound.,\
+ com.sun.naming.internal.,\
+ com.sun.proxy.,\
+ com.sun.corba.se.,\
+ com.sun.org.apache.bcel.internal.,\
+ com.sun.org.apache.regexp.internal.,\
+ com.sun.org.apache.xerces.internal.,\
+ com.sun.org.apache.xpath.internal.,\
+ com.sun.org.apache.xalan.internal.extensions.,\
+ com.sun.org.apache.xalan.internal.lib.,\
+ com.sun.org.apache.xalan.internal.res.,\
+ com.sun.org.apache.xalan.internal.templates.,\
+ com.sun.org.apache.xalan.internal.utils.,\
+ com.sun.org.apache.xalan.internal.xslt.,\
+ com.sun.org.apache.xalan.internal.xsltc.cmdline.,\
+ com.sun.org.apache.xalan.internal.xsltc.compiler.,\
+ com.sun.org.apache.xalan.internal.xsltc.trax.,\
+ com.sun.org.apache.xalan.internal.xsltc.util.,\
+ com.sun.org.apache.xml.internal.res.,\
+ com.sun.org.apache.xml.internal.security.,\
+ com.sun.org.apache.xml.internal.serializer.utils.,\
+ com.sun.org.apache.xml.internal.utils.,\
+ com.sun.org.glassfish.,\
+ com.oracle.xmlns.internal.,\
+ com.oracle.webservices.internal.,\
+ org.jcp.xml.dsig.internal.,\
+ jdk.internal.,\
+ jdk.nashorn.internal.,\
+ jdk.nashorn.tools.,\
+ com.sun.activation.registries.,\
+#ifdef macosx
+ apple.,\
+#endif
+
+#
+# List of comma-separated packages that start with or equal this string
+# will cause a security exception to be thrown when
+# passed to checkPackageDefinition unless the
+# corresponding RuntimePermission ("defineClassInPackage."+package) has
+# been granted.
+#
+# by default, none of the class loaders supplied with the JDK call
+# checkPackageDefinition.
+#
+package.definition=sun.,\
+ com.sun.xml.internal.,\
+ com.sun.imageio.,\
+ com.sun.istack.internal.,\
+ com.sun.jmx.,\
+ com.sun.media.sound.,\
+ com.sun.naming.internal.,\
+ com.sun.proxy.,\
+ com.sun.corba.se.,\
+ com.sun.org.apache.bcel.internal.,\
+ com.sun.org.apache.regexp.internal.,\
+ com.sun.org.apache.xerces.internal.,\
+ com.sun.org.apache.xpath.internal.,\
+ com.sun.org.apache.xalan.internal.extensions.,\
+ com.sun.org.apache.xalan.internal.lib.,\
+ com.sun.org.apache.xalan.internal.res.,\
+ com.sun.org.apache.xalan.internal.templates.,\
+ com.sun.org.apache.xalan.internal.utils.,\
+ com.sun.org.apache.xalan.internal.xslt.,\
+ com.sun.org.apache.xalan.internal.xsltc.cmdline.,\
+ com.sun.org.apache.xalan.internal.xsltc.compiler.,\
+ com.sun.org.apache.xalan.internal.xsltc.trax.,\
+ com.sun.org.apache.xalan.internal.xsltc.util.,\
+ com.sun.org.apache.xml.internal.res.,\
+ com.sun.org.apache.xml.internal.security.,\
+ com.sun.org.apache.xml.internal.serializer.utils.,\
+ com.sun.org.apache.xml.internal.utils.,\
+ com.sun.org.glassfish.,\
+ com.oracle.xmlns.internal.,\
+ com.oracle.webservices.internal.,\
+ org.jcp.xml.dsig.internal.,\
+ jdk.internal.,\
+ jdk.nashorn.internal.,\
+ jdk.nashorn.tools.,\
+ com.sun.activation.registries.,\
+#ifdef macosx
+ apple.,\
+#endif
+
+#
+# Determines whether this properties file can be appended to
+# or overridden on the command line via -Djava.security.properties
+#
+security.overridePropertiesFile=true
+
+#
+# Determines the default key and trust manager factory algorithms for
+# the javax.net.ssl package.
+#
+ssl.KeyManagerFactory.algorithm=SunX509
+ssl.TrustManagerFactory.algorithm=PKIX
+
+#
+# The Java-level namelookup cache policy for successful lookups:
+#
+# any negative value: caching forever
+# any positive value: the number of seconds to cache an address for
+# zero: do not cache
+#
+# default value is forever (FOREVER). For security reasons, this
+# caching is made forever when a security manager is set. When a security
+# manager is not set, the default behavior in this implementation
+# is to cache for 30 seconds.
+#
+# NOTE: setting this to anything other than the default value can have
+# serious security implications. Do not set it unless
+# you are sure you are not exposed to DNS spoofing attack.
+#
+#networkaddress.cache.ttl=-1
+
+# The Java-level namelookup cache policy for failed lookups:
+#
+# any negative value: cache forever
+# any positive value: the number of seconds to cache negative lookup results
+# zero: do not cache
+#
+# In some Microsoft Windows networking environments that employ
+# the WINS name service in addition to DNS, name service lookups
+# that fail may take a noticeably long time to return (approx. 5 seconds).
+# For this reason the default caching policy is to maintain these
+# results for 10 seconds.
+#
+#
+networkaddress.cache.negative.ttl=10
+
+#
+# Properties to configure OCSP for certificate revocation checking
+#
+
+# Enable OCSP
+#
+# By default, OCSP is not used for certificate revocation checking.
+# This property enables the use of OCSP when set to the value "true".
+#
+# NOTE: SocketPermission is required to connect to an OCSP responder.
+#
+# Example,
+# ocsp.enable=true
+
+#
+# Location of the OCSP responder
+#
+# By default, the location of the OCSP responder is determined implicitly
+# from the certificate being validated. This property explicitly specifies
+# the location of the OCSP responder. The property is used when the
+# Authority Information Access extension (defined in RFC 3280) is absent
+# from the certificate or when it requires overriding.
+#
+# Example,
+# ocsp.responderURL=http://ocsp.example.net:80
+
+#
+# Subject name of the OCSP responder's certificate
+#
+# By default, the certificate of the OCSP responder is that of the issuer
+# of the certificate being validated. This property identifies the certificate
+# of the OCSP responder when the default does not apply. Its value is a string
+# distinguished name (defined in RFC 2253) which identifies a certificate in
+# the set of certificates supplied during cert path validation. In cases where
+# the subject name alone is not sufficient to uniquely identify the certificate
+# then both the "ocsp.responderCertIssuerName" and
+# "ocsp.responderCertSerialNumber" properties must be used instead. When this
+# property is set then those two properties are ignored.
+#
+# Example,
+# ocsp.responderCertSubjectName="CN=OCSP Responder, O=XYZ Corp"
+
+#
+# Issuer name of the OCSP responder's certificate
+#
+# By default, the certificate of the OCSP responder is that of the issuer
+# of the certificate being validated. This property identifies the certificate
+# of the OCSP responder when the default does not apply. Its value is a string
+# distinguished name (defined in RFC 2253) which identifies a certificate in
+# the set of certificates supplied during cert path validation. When this
+# property is set then the "ocsp.responderCertSerialNumber" property must also
+# be set. When the "ocsp.responderCertSubjectName" property is set then this
+# property is ignored.
+#
+# Example,
+# ocsp.responderCertIssuerName="CN=Enterprise CA, O=XYZ Corp"
+
+#
+# Serial number of the OCSP responder's certificate
+#
+# By default, the certificate of the OCSP responder is that of the issuer
+# of the certificate being validated. This property identifies the certificate
+# of the OCSP responder when the default does not apply. Its value is a string
+# of hexadecimal digits (colon or space separators may be present) which
+# identifies a certificate in the set of certificates supplied during cert path
+# validation. When this property is set then the "ocsp.responderCertIssuerName"
+# property must also be set. When the "ocsp.responderCertSubjectName" property
+# is set then this property is ignored.
+#
+# Example,
+# ocsp.responderCertSerialNumber=2A:FF:00
+
+#
+# Policy for failed Kerberos KDC lookups:
+#
+# When a KDC is unavailable (network error, service failure, etc), it is
+# put inside a blacklist and accessed less often for future requests. The
+# value (case-insensitive) for this policy can be:
+#
+# tryLast
+# KDCs in the blacklist are always tried after those not on the list.
+#
+# tryLess[:max_retries,timeout]
+# KDCs in the blacklist are still tried by their order in the configuration,
+# but with smaller max_retries and timeout values. max_retries and timeout
+# are optional numerical parameters (default 1 and 5000, which means once
+# and 5 seconds). Please notes that if any of the values defined here is
+# more than what is defined in krb5.conf, it will be ignored.
+#
+# Whenever a KDC is detected as available, it is removed from the blacklist.
+# The blacklist is reset when krb5.conf is reloaded. You can add
+# refreshKrb5Config=true to a JAAS configuration file so that krb5.conf is
+# reloaded whenever a JAAS authentication is attempted.
+#
+# Example,
+# krb5.kdc.bad.policy = tryLast
+# krb5.kdc.bad.policy = tryLess:2,2000
+krb5.kdc.bad.policy = tryLast
+
+# Algorithm restrictions for certification path (CertPath) processing
+#
+# In some environments, certain algorithms or key lengths may be undesirable
+# for certification path building and validation. For example, "MD2" is
+# generally no longer considered to be a secure hash algorithm. This section
+# describes the mechanism for disabling algorithms based on algorithm name
+# and/or key length. This includes algorithms used in certificates, as well
+# as revocation information such as CRLs and signed OCSP Responses.
+#
+# The syntax of the disabled algorithm string is described as this Java
+# BNF-style:
+# DisabledAlgorithms:
+# " DisabledAlgorithm { , DisabledAlgorithm } "
+#
+# DisabledAlgorithm:
+# AlgorithmName [Constraint]
+#
+# AlgorithmName:
+# (see below)
+#
+# Constraint:
+# KeySizeConstraint
+#
+# KeySizeConstraint:
+# keySize Operator DecimalInteger
+#
+# Operator:
+# <= | < | == | != | >= | >
+#
+# DecimalInteger:
+# DecimalDigits
+#
+# DecimalDigits:
+# DecimalDigit {DecimalDigit}
+#
+# DecimalDigit: one of
+# 1 2 3 4 5 6 7 8 9 0
+#
+# The "AlgorithmName" is the standard algorithm name of the disabled
+# algorithm. See "Java Cryptography Architecture Standard Algorithm Name
+# Documentation" for information about Standard Algorithm Names. Matching
+# is performed using a case-insensitive sub-element matching rule. (For
+# example, in "SHA1withECDSA" the sub-elements are "SHA1" for hashing and
+# "ECDSA" for signatures.) If the assertion "AlgorithmName" is a
+# sub-element of the certificate algorithm name, the algorithm will be
+# rejected during certification path building and validation. For example,
+# the assertion algorithm name "DSA" will disable all certificate algorithms
+# that rely on DSA, such as NONEwithDSA, SHA1withDSA. However, the assertion
+# will not disable algorithms related to "ECDSA".
+#
+# A "Constraint" provides further guidance for the algorithm being specified.
+# The "KeySizeConstraint" requires a key of a valid size range if the
+# "AlgorithmName" is of a key algorithm. The "DecimalInteger" indicates the
+# key size specified in number of bits. For example, "RSA keySize <= 1024"
+# indicates that any RSA key with key size less than or equal to 1024 bits
+# should be disabled, and "RSA keySize < 1024, RSA keySize > 2048" indicates
+# that any RSA key with key size less than 1024 or greater than 2048 should
+# be disabled. Note that the "KeySizeConstraint" only makes sense to key
+# algorithms.
+#
+# Note: This property is currently used by Oracle's PKIX implementation. It
+# is not guaranteed to be examined and used by other implementations.
+#
+# Example:
+# jdk.certpath.disabledAlgorithms=MD2, DSA, RSA keySize < 2048
+#
+#
+jdk.certpath.disabledAlgorithms=MD2, MD5, RSA keySize < 1024
+
+# Algorithm restrictions for Secure Socket Layer/Transport Layer Security
+# (SSL/TLS) processing
+#
+# In some environments, certain algorithms or key lengths may be undesirable
+# when using SSL/TLS. This section describes the mechanism for disabling
+# algorithms during SSL/TLS security parameters negotiation, including cipher
+# suites selection, peer authentication and key exchange mechanisms.
+#
+# For PKI-based peer authentication and key exchange mechanisms, this list
+# of disabled algorithms will also be checked during certification path
+# building and validation, including algorithms used in certificates, as
+# well as revocation information such as CRLs and signed OCSP Responses.
+# This is in addition to the jdk.certpath.disabledAlgorithms property above.
+#
+# See the specification of "jdk.certpath.disabledAlgorithms" for the
+# syntax of the disabled algorithm string.
+#
+# Note: This property is currently used by Oracle's JSSE implementation.
+# It is not guaranteed to be examined and used by other implementations.
+#
+# Example:
+# jdk.tls.disabledAlgorithms=MD5, SHA1, DSA, RSA keySize < 2048
--- /dev/null 2014-07-28 21:52:43.000000000 +0800
+++ new/test/java/lang/SecurityManager/CheckSecurityProvider.java 2014-07-28 21:52:42.000000000 +0800
@@ -0,0 +1,90 @@
+/*
+ * Copyright (c) 2014, Oracle and/or its affiliates. All rights reserved.
+ * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+ *
+ * This code is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 only, as
+ * published by the Free Software Foundation.
+ *
+ * This code is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * version 2 for more details (a copy is included in the LICENSE file that
+ * accompanied this code).
+ *
+ * You should have received a copy of the GNU General Public License version
+ * 2 along with this work; if not, write to the Free Software Foundation,
+ * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
+ * or visit www.oracle.com if you need additional information or have any
+ * questions.
+ */
+
+/*
+ * @test
+ * @bug 6997010
+ * @summary Consolidate java.security files into one file with modifications
+ */
+
+import java.security.Provider;
+import java.security.Security;
+import java.util.ArrayList;
+import java.util.Iterator;
+import java.util.List;
+
+/*
+ * The main benefit of this test is to catch merge errors or other types
+ * of issues where one or more of the security providers are accidentally
+ * removed. This is why the known security providers have to
+ * be explicitly listed below.
+ */
+public class CheckSecurityProvider {
+ public static void main(String[] args) throws Exception {
+
+ String os = System.getProperty("os.name");
+
+ /*
+ * This array should be updated whenever new security providers
+ * are added to the the java.security file.
+ * NOTE: it should be in the same order as the java.security file
+ */
+
+ List<String> expected = new ArrayList<>();
+
+ if (os.equals("SunOS")) {
+ expected.add("com.oracle.security.ucrypto.UcryptoProvider");
+ expected.add("sun.security.pkcs11.SunPKCS11");
+ }
+ expected.add("sun.security.provider.Sun");
+ expected.add("sun.security.rsa.SunRsaSign");
+ expected.add("sun.security.ec.SunEC");
+ expected.add("com.sun.net.ssl.internal.ssl.Provider");
+ expected.add("com.sun.crypto.provider.SunJCE");
+ expected.add("sun.security.jgss.SunProvider");
+ expected.add("com.sun.security.sasl.Provider");
+ expected.add("org.jcp.xml.dsig.internal.dom.XMLDSigRI");
+ expected.add("sun.security.smartcardio.SunPCSC");
+ if (os.startsWith("Windows")) {
+ expected.add("sun.security.mscapi.SunMSCAPI");
+ }
+ if (os.contains("OS X")) {
+ expected.add("apple.security.AppleProvider");
+ }
+
+ Iterator<String> iter = expected.iterator();
+ for (Provider p: Security.getProviders()) {
+ if (!iter.hasNext()) {
+ throw new Exception("Less expected");
+ }
+ String n1 = iter.next();
+ String n2 = p.getClass().getName();
+ if (!n1.equals(n2)) {
+ throw new Exception("Expected " + n1 + ", actual " + n2);
+ }
+ }
+ if (iter.hasNext()) {
+ throw new Exception("More expected");
+ }
+ }
+}
--- old/src/share/lib/security/java.security-aix 2014-07-28 21:52:45.000000000 +0800
+++ /dev/null 2014-07-28 21:52:45.000000000 +0800
@@ -1,496 +0,0 @@
-#
-# This is the "master security properties file".
-#
-# An alternate java.security properties file may be specified
-# from the command line via the system property
-#
-# -Djava.security.properties=<URL>
-#
-# This properties file appends to the master security properties file.
-# If both properties files specify values for the same key, the value
-# from the command-line properties file is selected, as it is the last
-# one loaded.
-#
-# Also, if you specify
-#
-# -Djava.security.properties==<URL> (2 equals),
-#
-# then that properties file completely overrides the master security
-# properties file.
-#
-# To disable the ability to specify an additional properties file from
-# the command line, set the key security.overridePropertiesFile
-# to false in the master security properties file. It is set to true
-# by default.
-
-# In this file, various security properties are set for use by
-# java.security classes. This is where users can statically register
-# Cryptography Package Providers ("providers" for short). The term
-# "provider" refers to a package or set of packages that supply a
-# concrete implementation of a subset of the cryptography aspects of
-# the Java Security API. A provider may, for example, implement one or
-# more digital signature algorithms or message digest algorithms.
-#
-# Each provider must implement a subclass of the Provider class.
-# To register a provider in this master security properties file,
-# specify the Provider subclass name and priority in the format
-#
-# security.provider.<n>=<className>
-#
-# This declares a provider, and specifies its preference
-# order n. The preference order is the order in which providers are
-# searched for requested algorithms (when no specific provider is
-# requested). The order is 1-based; 1 is the most preferred, followed
-# by 2, and so on.
-#
-# <className> must specify the subclass of the Provider class whose
-# constructor sets the values of various properties that are required
-# for the Java Security API to look up the algorithms or other
-# facilities implemented by the provider.
-#
-# There must be at least one provider specification in java.security.
-# There is a default provider that comes standard with the JDK. It
-# is called the "SUN" provider, and its Provider subclass
-# named Sun appears in the sun.security.provider package. Thus, the
-# "SUN" provider is registered via the following:
-#
-# security.provider.1=sun.security.provider.Sun
-#
-# (The number 1 is used for the default provider.)
-#
-# Note: Providers can be dynamically registered instead by calls to
-# either the addProvider or insertProviderAt method in the Security
-# class.
-
-#
-# List of providers and their preference orders (see above):
-#
-security.provider.1=sun.security.provider.Sun
-security.provider.2=sun.security.rsa.SunRsaSign
-security.provider.3=sun.security.ec.SunEC
-security.provider.4=com.sun.net.ssl.internal.ssl.Provider
-security.provider.5=com.sun.crypto.provider.SunJCE
-security.provider.6=sun.security.jgss.SunProvider
-security.provider.7=com.sun.security.sasl.Provider
-security.provider.8=org.jcp.xml.dsig.internal.dom.XMLDSigRI
-security.provider.9=sun.security.smartcardio.SunPCSC
-
-#
-# Sun Provider SecureRandom seed source.
-#
-# Select the primary source of seed data for the "SHA1PRNG" and
-# "NativePRNG" SecureRandom implementations in the "Sun" provider.
-# (Other SecureRandom implementations might also use this property.)
-#
-# On Unix-like systems (for example, Solaris/Linux/MacOS), the
-# "NativePRNG" and "SHA1PRNG" implementations obtains seed data from
-# special device files such as file:/dev/random.
-#
-# On Windows systems, specifying the URLs "file:/dev/random" or
-# "file:/dev/urandom" will enable the native Microsoft CryptoAPI seeding
-# mechanism for SHA1PRNG.
-#
-# By default, an attempt is made to use the entropy gathering device
-# specified by the "securerandom.source" Security property. If an
-# exception occurs while accessing the specified URL:
-#
-# SHA1PRNG:
-# the traditional system/thread activity algorithm will be used.
-#
-# NativePRNG:
-# a default value of /dev/random will be used. If neither
-# are available, the implementation will be disabled.
-# "file" is the only currently supported protocol type.
-#
-# The entropy gathering device can also be specified with the System
-# property "java.security.egd". For example:
-#
-# % java -Djava.security.egd=file:/dev/random MainClass
-#
-# Specifying this System property will override the
-# "securerandom.source" Security property.
-#
-# In addition, if "file:/dev/random" or "file:/dev/urandom" is
-# specified, the "NativePRNG" implementation will be more preferred than
-# SHA1PRNG in the Sun provider.
-#
-securerandom.source=file:/dev/random
-
-#
-# A list of known strong SecureRandom implementations.
-#
-# To help guide applications in selecting a suitable strong
-# java.security.SecureRandom implementation, Java distributions should
-# indicate a list of known strong implementations using the property.
-#
-# This is a comma-separated list of algorithm and/or algorithm:provider
-# entries.
-#
-securerandom.strongAlgorithms=NativePRNGBlocking:SUN
-
-#
-# Class to instantiate as the javax.security.auth.login.Configuration
-# provider.
-#
-login.configuration.provider=sun.security.provider.ConfigFile
-
-#
-# Default login configuration file
-#
-#login.config.url.1=file:${user.home}/.java.login.config
-
-#
-# Class to instantiate as the system Policy. This is the name of the class
-# that will be used as the Policy object.
-#
-policy.provider=sun.security.provider.PolicyFile
-
-# The default is to have a single system-wide policy file,
-# and a policy file in the user's home directory.
-policy.url.1=file:${java.home}/lib/security/java.policy
-policy.url.2=file:${user.home}/.java.policy
-
-# whether or not we expand properties in the policy file
-# if this is set to false, properties (${...}) will not be expanded in policy
-# files.
-policy.expandProperties=true
-
-# whether or not we allow an extra policy to be passed on the command line
-# with -Djava.security.policy=somefile. Comment out this line to disable
-# this feature.
-policy.allowSystemProperty=true
-
-# whether or not we look into the IdentityScope for trusted Identities
-# when encountering a 1.1 signed JAR file. If the identity is found
-# and is trusted, we grant it AllPermission.
-policy.ignoreIdentityScope=false
-
-#
-# Default keystore type.
-#
-keystore.type=jks
-
-#
-# List of comma-separated packages that start with or equal this string
-# will cause a security exception to be thrown when
-# passed to checkPackageAccess unless the
-# corresponding RuntimePermission ("accessClassInPackage."+package) has
-# been granted.
-package.access=sun.,\
- com.sun.xml.internal.,\
- com.sun.imageio.,\
- com.sun.istack.internal.,\
- com.sun.jmx.,\
- com.sun.media.sound.,\
- com.sun.naming.internal.,\
- com.sun.proxy.,\
- com.sun.corba.se.,\
- com.sun.org.apache.bcel.internal.,\
- com.sun.org.apache.regexp.internal.,\
- com.sun.org.apache.xerces.internal.,\
- com.sun.org.apache.xpath.internal.,\
- com.sun.org.apache.xalan.internal.extensions.,\
- com.sun.org.apache.xalan.internal.lib.,\
- com.sun.org.apache.xalan.internal.res.,\
- com.sun.org.apache.xalan.internal.templates.,\
- com.sun.org.apache.xalan.internal.utils.,\
- com.sun.org.apache.xalan.internal.xslt.,\
- com.sun.org.apache.xalan.internal.xsltc.cmdline.,\
- com.sun.org.apache.xalan.internal.xsltc.compiler.,\
- com.sun.org.apache.xalan.internal.xsltc.trax.,\
- com.sun.org.apache.xalan.internal.xsltc.util.,\
- com.sun.org.apache.xml.internal.res.,\
- com.sun.org.apache.xml.internal.security.,\
- com.sun.org.apache.xml.internal.serializer.utils.,\
- com.sun.org.apache.xml.internal.utils.,\
- com.sun.org.glassfish.,\
- com.oracle.xmlns.internal.,\
- com.oracle.webservices.internal.,\
- org.jcp.xml.dsig.internal.,\
- jdk.internal.,\
- jdk.nashorn.internal.,\
- jdk.nashorn.tools.
-
-
-#
-# List of comma-separated packages that start with or equal this string
-# will cause a security exception to be thrown when
-# passed to checkPackageDefinition unless the
-# corresponding RuntimePermission ("defineClassInPackage."+package) has
-# been granted.
-#
-# by default, none of the class loaders supplied with the JDK call
-# checkPackageDefinition.
-#
-package.definition=sun.,\
- com.sun.xml.internal.,\
- com.sun.imageio.,\
- com.sun.istack.internal.,\
- com.sun.jmx.,\
- com.sun.media.sound.,\
- com.sun.naming.internal.,\
- com.sun.proxy.,\
- com.sun.corba.se.,\
- com.sun.org.apache.bcel.internal.,\
- com.sun.org.apache.regexp.internal.,\
- com.sun.org.apache.xerces.internal.,\
- com.sun.org.apache.xpath.internal.,\
- com.sun.org.apache.xalan.internal.extensions.,\
- com.sun.org.apache.xalan.internal.lib.,\
- com.sun.org.apache.xalan.internal.res.,\
- com.sun.org.apache.xalan.internal.templates.,\
- com.sun.org.apache.xalan.internal.utils.,\
- com.sun.org.apache.xalan.internal.xslt.,\
- com.sun.org.apache.xalan.internal.xsltc.cmdline.,\
- com.sun.org.apache.xalan.internal.xsltc.compiler.,\
- com.sun.org.apache.xalan.internal.xsltc.trax.,\
- com.sun.org.apache.xalan.internal.xsltc.util.,\
- com.sun.org.apache.xml.internal.res.,\
- com.sun.org.apache.xml.internal.security.,\
- com.sun.org.apache.xml.internal.serializer.utils.,\
- com.sun.org.apache.xml.internal.utils.,\
- com.sun.org.glassfish.,\
- com.oracle.xmlns.internal.,\
- com.oracle.webservices.internal.,\
- org.jcp.xml.dsig.internal.,\
- jdk.internal.,\
- jdk.nashorn.internal.,\
- jdk.nashorn.tools.
-
-
-#
-# Determines whether this properties file can be appended to
-# or overridden on the command line via -Djava.security.properties
-#
-security.overridePropertiesFile=true
-
-#
-# Determines the default key and trust manager factory algorithms for
-# the javax.net.ssl package.
-#
-ssl.KeyManagerFactory.algorithm=SunX509
-ssl.TrustManagerFactory.algorithm=PKIX
-
-#
-# The Java-level namelookup cache policy for successful lookups:
-#
-# any negative value: caching forever
-# any positive value: the number of seconds to cache an address for
-# zero: do not cache
-#
-# default value is forever (FOREVER). For security reasons, this
-# caching is made forever when a security manager is set. When a security
-# manager is not set, the default behavior in this implementation
-# is to cache for 30 seconds.
-#
-# NOTE: setting this to anything other than the default value can have
-# serious security implications. Do not set it unless
-# you are sure you are not exposed to DNS spoofing attack.
-#
-#networkaddress.cache.ttl=-1
-
-# The Java-level namelookup cache policy for failed lookups:
-#
-# any negative value: cache forever
-# any positive value: the number of seconds to cache negative lookup results
-# zero: do not cache
-#
-# In some Microsoft Windows networking environments that employ
-# the WINS name service in addition to DNS, name service lookups
-# that fail may take a noticeably long time to return (approx. 5 seconds).
-# For this reason the default caching policy is to maintain these
-# results for 10 seconds.
-#
-#
-networkaddress.cache.negative.ttl=10
-
-#
-# Properties to configure OCSP for certificate revocation checking
-#
-
-# Enable OCSP
-#
-# By default, OCSP is not used for certificate revocation checking.
-# This property enables the use of OCSP when set to the value "true".
-#
-# NOTE: SocketPermission is required to connect to an OCSP responder.
-#
-# Example,
-# ocsp.enable=true
-
-#
-# Location of the OCSP responder
-#
-# By default, the location of the OCSP responder is determined implicitly
-# from the certificate being validated. This property explicitly specifies
-# the location of the OCSP responder. The property is used when the
-# Authority Information Access extension (defined in RFC 3280) is absent
-# from the certificate or when it requires overriding.
-#
-# Example,
-# ocsp.responderURL=http://ocsp.example.net:80
-
-#
-# Subject name of the OCSP responder's certificate
-#
-# By default, the certificate of the OCSP responder is that of the issuer
-# of the certificate being validated. This property identifies the certificate
-# of the OCSP responder when the default does not apply. Its value is a string
-# distinguished name (defined in RFC 2253) which identifies a certificate in
-# the set of certificates supplied during cert path validation. In cases where
-# the subject name alone is not sufficient to uniquely identify the certificate
-# then both the "ocsp.responderCertIssuerName" and
-# "ocsp.responderCertSerialNumber" properties must be used instead. When this
-# property is set then those two properties are ignored.
-#
-# Example,
-# ocsp.responderCertSubjectName="CN=OCSP Responder, O=XYZ Corp"
-
-#
-# Issuer name of the OCSP responder's certificate
-#
-# By default, the certificate of the OCSP responder is that of the issuer
-# of the certificate being validated. This property identifies the certificate
-# of the OCSP responder when the default does not apply. Its value is a string
-# distinguished name (defined in RFC 2253) which identifies a certificate in
-# the set of certificates supplied during cert path validation. When this
-# property is set then the "ocsp.responderCertSerialNumber" property must also
-# be set. When the "ocsp.responderCertSubjectName" property is set then this
-# property is ignored.
-#
-# Example,
-# ocsp.responderCertIssuerName="CN=Enterprise CA, O=XYZ Corp"
-
-#
-# Serial number of the OCSP responder's certificate
-#
-# By default, the certificate of the OCSP responder is that of the issuer
-# of the certificate being validated. This property identifies the certificate
-# of the OCSP responder when the default does not apply. Its value is a string
-# of hexadecimal digits (colon or space separators may be present) which
-# identifies a certificate in the set of certificates supplied during cert path
-# validation. When this property is set then the "ocsp.responderCertIssuerName"
-# property must also be set. When the "ocsp.responderCertSubjectName" property
-# is set then this property is ignored.
-#
-# Example,
-# ocsp.responderCertSerialNumber=2A:FF:00
-
-#
-# Policy for failed Kerberos KDC lookups:
-#
-# When a KDC is unavailable (network error, service failure, etc), it is
-# put inside a blacklist and accessed less often for future requests. The
-# value (case-insensitive) for this policy can be:
-#
-# tryLast
-# KDCs in the blacklist are always tried after those not on the list.
-#
-# tryLess[:max_retries,timeout]
-# KDCs in the blacklist are still tried by their order in the configuration,
-# but with smaller max_retries and timeout values. max_retries and timeout
-# are optional numerical parameters (default 1 and 5000, which means once
-# and 5 seconds). Please notes that if any of the values defined here is
-# more than what is defined in krb5.conf, it will be ignored.
-#
-# Whenever a KDC is detected as available, it is removed from the blacklist.
-# The blacklist is reset when krb5.conf is reloaded. You can add
-# refreshKrb5Config=true to a JAAS configuration file so that krb5.conf is
-# reloaded whenever a JAAS authentication is attempted.
-#
-# Example,
-# krb5.kdc.bad.policy = tryLast
-# krb5.kdc.bad.policy = tryLess:2,2000
-krb5.kdc.bad.policy = tryLast
-
-# Algorithm restrictions for certification path (CertPath) processing
-#
-# In some environments, certain algorithms or key lengths may be undesirable
-# for certification path building and validation. For example, "MD2" is
-# generally no longer considered to be a secure hash algorithm. This section
-# describes the mechanism for disabling algorithms based on algorithm name
-# and/or key length. This includes algorithms used in certificates, as well
-# as revocation information such as CRLs and signed OCSP Responses.
-#
-# The syntax of the disabled algorithm string is described as this Java
-# BNF-style:
-# DisabledAlgorithms:
-# " DisabledAlgorithm { , DisabledAlgorithm } "
-#
-# DisabledAlgorithm:
-# AlgorithmName [Constraint]
-#
-# AlgorithmName:
-# (see below)
-#
-# Constraint:
-# KeySizeConstraint
-#
-# KeySizeConstraint:
-# keySize Operator DecimalInteger
-#
-# Operator:
-# <= | < | == | != | >= | >
-#
-# DecimalInteger:
-# DecimalDigits
-#
-# DecimalDigits:
-# DecimalDigit {DecimalDigit}
-#
-# DecimalDigit: one of
-# 1 2 3 4 5 6 7 8 9 0
-#
-# The "AlgorithmName" is the standard algorithm name of the disabled
-# algorithm. See "Java Cryptography Architecture Standard Algorithm Name
-# Documentation" for information about Standard Algorithm Names. Matching
-# is performed using a case-insensitive sub-element matching rule. (For
-# example, in "SHA1withECDSA" the sub-elements are "SHA1" for hashing and
-# "ECDSA" for signatures.) If the assertion "AlgorithmName" is a
-# sub-element of the certificate algorithm name, the algorithm will be
-# rejected during certification path building and validation. For example,
-# the assertion algorithm name "DSA" will disable all certificate algorithms
-# that rely on DSA, such as NONEwithDSA, SHA1withDSA. However, the assertion
-# will not disable algorithms related to "ECDSA".
-#
-# A "Constraint" provides further guidance for the algorithm being specified.
-# The "KeySizeConstraint" requires a key of a valid size range if the
-# "AlgorithmName" is of a key algorithm. The "DecimalInteger" indicates the
-# key size specified in number of bits. For example, "RSA keySize <= 1024"
-# indicates that any RSA key with key size less than or equal to 1024 bits
-# should be disabled, and "RSA keySize < 1024, RSA keySize > 2048" indicates
-# that any RSA key with key size less than 1024 or greater than 2048 should
-# be disabled. Note that the "KeySizeConstraint" only makes sense to key
-# algorithms.
-#
-# Note: This property is currently used by Oracle's PKIX implementation. It
-# is not guaranteed to be examined and used by other implementations.
-#
-# Example:
-# jdk.certpath.disabledAlgorithms=MD2, DSA, RSA keySize < 2048
-#
-#
-jdk.certpath.disabledAlgorithms=MD2, MD5, RSA keySize < 1024
-
-# Algorithm restrictions for Secure Socket Layer/Transport Layer Security
-# (SSL/TLS) processing
-#
-# In some environments, certain algorithms or key lengths may be undesirable
-# when using SSL/TLS. This section describes the mechanism for disabling
-# algorithms during SSL/TLS security parameters negotiation, including cipher
-# suites selection, peer authentication and key exchange mechanisms.
-#
-# For PKI-based peer authentication and key exchange mechanisms, this list
-# of disabled algorithms will also be checked during certification path
-# building and validation, including algorithms used in certificates, as
-# well as revocation information such as CRLs and signed OCSP Responses.
-# This is in addition to the jdk.certpath.disabledAlgorithms property above.
-#
-# See the specification of "jdk.certpath.disabledAlgorithms" for the
-# syntax of the disabled algorithm string.
-#
-# Note: This property is currently used by Oracle's JSSE implementation.
-# It is not guaranteed to be examined and used by other implementations.
-#
-# Example:
-# jdk.tls.disabledAlgorithms=MD5, SHA1, DSA, RSA keySize < 2048
--- old/src/share/lib/security/java.security-linux 2014-07-28 21:52:46.000000000 +0800
+++ /dev/null 2014-07-28 21:52:47.000000000 +0800
@@ -1,496 +0,0 @@
-#
-# This is the "master security properties file".
-#
-# An alternate java.security properties file may be specified
-# from the command line via the system property
-#
-# -Djava.security.properties=<URL>
-#
-# This properties file appends to the master security properties file.
-# If both properties files specify values for the same key, the value
-# from the command-line properties file is selected, as it is the last
-# one loaded.
-#
-# Also, if you specify
-#
-# -Djava.security.properties==<URL> (2 equals),
-#
-# then that properties file completely overrides the master security
-# properties file.
-#
-# To disable the ability to specify an additional properties file from
-# the command line, set the key security.overridePropertiesFile
-# to false in the master security properties file. It is set to true
-# by default.
-
-# In this file, various security properties are set for use by
-# java.security classes. This is where users can statically register
-# Cryptography Package Providers ("providers" for short). The term
-# "provider" refers to a package or set of packages that supply a
-# concrete implementation of a subset of the cryptography aspects of
-# the Java Security API. A provider may, for example, implement one or
-# more digital signature algorithms or message digest algorithms.
-#
-# Each provider must implement a subclass of the Provider class.
-# To register a provider in this master security properties file,
-# specify the Provider subclass name and priority in the format
-#
-# security.provider.<n>=<className>
-#
-# This declares a provider, and specifies its preference
-# order n. The preference order is the order in which providers are
-# searched for requested algorithms (when no specific provider is
-# requested). The order is 1-based; 1 is the most preferred, followed
-# by 2, and so on.
-#
-# <className> must specify the subclass of the Provider class whose
-# constructor sets the values of various properties that are required
-# for the Java Security API to look up the algorithms or other
-# facilities implemented by the provider.
-#
-# There must be at least one provider specification in java.security.
-# There is a default provider that comes standard with the JDK. It
-# is called the "SUN" provider, and its Provider subclass
-# named Sun appears in the sun.security.provider package. Thus, the
-# "SUN" provider is registered via the following:
-#
-# security.provider.1=sun.security.provider.Sun
-#
-# (The number 1 is used for the default provider.)
-#
-# Note: Providers can be dynamically registered instead by calls to
-# either the addProvider or insertProviderAt method in the Security
-# class.
-
-#
-# List of providers and their preference orders (see above):
-#
-security.provider.1=sun.security.provider.Sun
-security.provider.2=sun.security.rsa.SunRsaSign
-security.provider.3=sun.security.ec.SunEC
-security.provider.4=com.sun.net.ssl.internal.ssl.Provider
-security.provider.5=com.sun.crypto.provider.SunJCE
-security.provider.6=sun.security.jgss.SunProvider
-security.provider.7=com.sun.security.sasl.Provider
-security.provider.8=org.jcp.xml.dsig.internal.dom.XMLDSigRI
-security.provider.9=sun.security.smartcardio.SunPCSC
-
-#
-# Sun Provider SecureRandom seed source.
-#
-# Select the primary source of seed data for the "SHA1PRNG" and
-# "NativePRNG" SecureRandom implementations in the "Sun" provider.
-# (Other SecureRandom implementations might also use this property.)
-#
-# On Unix-like systems (for example, Solaris/Linux/MacOS), the
-# "NativePRNG" and "SHA1PRNG" implementations obtains seed data from
-# special device files such as file:/dev/random.
-#
-# On Windows systems, specifying the URLs "file:/dev/random" or
-# "file:/dev/urandom" will enable the native Microsoft CryptoAPI seeding
-# mechanism for SHA1PRNG.
-#
-# By default, an attempt is made to use the entropy gathering device
-# specified by the "securerandom.source" Security property. If an
-# exception occurs while accessing the specified URL:
-#
-# SHA1PRNG:
-# the traditional system/thread activity algorithm will be used.
-#
-# NativePRNG:
-# a default value of /dev/random will be used. If neither
-# are available, the implementation will be disabled.
-# "file" is the only currently supported protocol type.
-#
-# The entropy gathering device can also be specified with the System
-# property "java.security.egd". For example:
-#
-# % java -Djava.security.egd=file:/dev/random MainClass
-#
-# Specifying this System property will override the
-# "securerandom.source" Security property.
-#
-# In addition, if "file:/dev/random" or "file:/dev/urandom" is
-# specified, the "NativePRNG" implementation will be more preferred than
-# SHA1PRNG in the Sun provider.
-#
-securerandom.source=file:/dev/random
-
-#
-# A list of known strong SecureRandom implementations.
-#
-# To help guide applications in selecting a suitable strong
-# java.security.SecureRandom implementation, Java distributions should
-# indicate a list of known strong implementations using the property.
-#
-# This is a comma-separated list of algorithm and/or algorithm:provider
-# entries.
-#
-securerandom.strongAlgorithms=NativePRNGBlocking:SUN
-
-#
-# Class to instantiate as the javax.security.auth.login.Configuration
-# provider.
-#
-login.configuration.provider=sun.security.provider.ConfigFile
-
-#
-# Default login configuration file
-#
-#login.config.url.1=file:${user.home}/.java.login.config
-
-#
-# Class to instantiate as the system Policy. This is the name of the class
-# that will be used as the Policy object.
-#
-policy.provider=sun.security.provider.PolicyFile
-
-# The default is to have a single system-wide policy file,
-# and a policy file in the user's home directory.
-policy.url.1=file:${java.home}/lib/security/java.policy
-policy.url.2=file:${user.home}/.java.policy
-
-# whether or not we expand properties in the policy file
-# if this is set to false, properties (${...}) will not be expanded in policy
-# files.
-policy.expandProperties=true
-
-# whether or not we allow an extra policy to be passed on the command line
-# with -Djava.security.policy=somefile. Comment out this line to disable
-# this feature.
-policy.allowSystemProperty=true
-
-# whether or not we look into the IdentityScope for trusted Identities
-# when encountering a 1.1 signed JAR file. If the identity is found
-# and is trusted, we grant it AllPermission.
-policy.ignoreIdentityScope=false
-
-#
-# Default keystore type.
-#
-keystore.type=jks
-
-#
-# List of comma-separated packages that start with or equal this string
-# will cause a security exception to be thrown when
-# passed to checkPackageAccess unless the
-# corresponding RuntimePermission ("accessClassInPackage."+package) has
-# been granted.
-package.access=sun.,\
- com.sun.xml.internal.,\
- com.sun.imageio.,\
- com.sun.istack.internal.,\
- com.sun.jmx.,\
- com.sun.media.sound.,\
- com.sun.naming.internal.,\
- com.sun.proxy.,\
- com.sun.corba.se.,\
- com.sun.org.apache.bcel.internal.,\
- com.sun.org.apache.regexp.internal.,\
- com.sun.org.apache.xerces.internal.,\
- com.sun.org.apache.xpath.internal.,\
- com.sun.org.apache.xalan.internal.extensions.,\
- com.sun.org.apache.xalan.internal.lib.,\
- com.sun.org.apache.xalan.internal.res.,\
- com.sun.org.apache.xalan.internal.templates.,\
- com.sun.org.apache.xalan.internal.utils.,\
- com.sun.org.apache.xalan.internal.xslt.,\
- com.sun.org.apache.xalan.internal.xsltc.cmdline.,\
- com.sun.org.apache.xalan.internal.xsltc.compiler.,\
- com.sun.org.apache.xalan.internal.xsltc.trax.,\
- com.sun.org.apache.xalan.internal.xsltc.util.,\
- com.sun.org.apache.xml.internal.res.,\
- com.sun.org.apache.xml.internal.security.,\
- com.sun.org.apache.xml.internal.serializer.utils.,\
- com.sun.org.apache.xml.internal.utils.,\
- com.sun.org.glassfish.,\
- com.oracle.xmlns.internal.,\
- com.oracle.webservices.internal.,\
- org.jcp.xml.dsig.internal.,\
- jdk.internal.,\
- jdk.nashorn.internal.,\
- jdk.nashorn.tools.,\
- com.sun.activation.registries.
-
-#
-# List of comma-separated packages that start with or equal this string
-# will cause a security exception to be thrown when
-# passed to checkPackageDefinition unless the
-# corresponding RuntimePermission ("defineClassInPackage."+package) has
-# been granted.
-#
-# by default, none of the class loaders supplied with the JDK call
-# checkPackageDefinition.
-#
-package.definition=sun.,\
- com.sun.xml.internal.,\
- com.sun.imageio.,\
- com.sun.istack.internal.,\
- com.sun.jmx.,\
- com.sun.media.sound.,\
- com.sun.naming.internal.,\
- com.sun.proxy.,\
- com.sun.corba.se.,\
- com.sun.org.apache.bcel.internal.,\
- com.sun.org.apache.regexp.internal.,\
- com.sun.org.apache.xerces.internal.,\
- com.sun.org.apache.xpath.internal.,\
- com.sun.org.apache.xalan.internal.extensions.,\
- com.sun.org.apache.xalan.internal.lib.,\
- com.sun.org.apache.xalan.internal.res.,\
- com.sun.org.apache.xalan.internal.templates.,\
- com.sun.org.apache.xalan.internal.utils.,\
- com.sun.org.apache.xalan.internal.xslt.,\
- com.sun.org.apache.xalan.internal.xsltc.cmdline.,\
- com.sun.org.apache.xalan.internal.xsltc.compiler.,\
- com.sun.org.apache.xalan.internal.xsltc.trax.,\
- com.sun.org.apache.xalan.internal.xsltc.util.,\
- com.sun.org.apache.xml.internal.res.,\
- com.sun.org.apache.xml.internal.security.,\
- com.sun.org.apache.xml.internal.serializer.utils.,\
- com.sun.org.apache.xml.internal.utils.,\
- com.sun.org.glassfish.,\
- com.oracle.xmlns.internal.,\
- com.oracle.webservices.internal.,\
- org.jcp.xml.dsig.internal.,\
- jdk.internal.,\
- jdk.nashorn.internal.,\
- jdk.nashorn.tools.,\
- com.sun.activation.registries.
-
-#
-# Determines whether this properties file can be appended to
-# or overridden on the command line via -Djava.security.properties
-#
-security.overridePropertiesFile=true
-
-#
-# Determines the default key and trust manager factory algorithms for
-# the javax.net.ssl package.
-#
-ssl.KeyManagerFactory.algorithm=SunX509
-ssl.TrustManagerFactory.algorithm=PKIX
-
-#
-# The Java-level namelookup cache policy for successful lookups:
-#
-# any negative value: caching forever
-# any positive value: the number of seconds to cache an address for
-# zero: do not cache
-#
-# default value is forever (FOREVER). For security reasons, this
-# caching is made forever when a security manager is set. When a security
-# manager is not set, the default behavior in this implementation
-# is to cache for 30 seconds.
-#
-# NOTE: setting this to anything other than the default value can have
-# serious security implications. Do not set it unless
-# you are sure you are not exposed to DNS spoofing attack.
-#
-#networkaddress.cache.ttl=-1
-
-# The Java-level namelookup cache policy for failed lookups:
-#
-# any negative value: cache forever
-# any positive value: the number of seconds to cache negative lookup results
-# zero: do not cache
-#
-# In some Microsoft Windows networking environments that employ
-# the WINS name service in addition to DNS, name service lookups
-# that fail may take a noticeably long time to return (approx. 5 seconds).
-# For this reason the default caching policy is to maintain these
-# results for 10 seconds.
-#
-#
-networkaddress.cache.negative.ttl=10
-
-#
-# Properties to configure OCSP for certificate revocation checking
-#
-
-# Enable OCSP
-#
-# By default, OCSP is not used for certificate revocation checking.
-# This property enables the use of OCSP when set to the value "true".
-#
-# NOTE: SocketPermission is required to connect to an OCSP responder.
-#
-# Example,
-# ocsp.enable=true
-
-#
-# Location of the OCSP responder
-#
-# By default, the location of the OCSP responder is determined implicitly
-# from the certificate being validated. This property explicitly specifies
-# the location of the OCSP responder. The property is used when the
-# Authority Information Access extension (defined in RFC 3280) is absent
-# from the certificate or when it requires overriding.
-#
-# Example,
-# ocsp.responderURL=http://ocsp.example.net:80
-
-#
-# Subject name of the OCSP responder's certificate
-#
-# By default, the certificate of the OCSP responder is that of the issuer
-# of the certificate being validated. This property identifies the certificate
-# of the OCSP responder when the default does not apply. Its value is a string
-# distinguished name (defined in RFC 2253) which identifies a certificate in
-# the set of certificates supplied during cert path validation. In cases where
-# the subject name alone is not sufficient to uniquely identify the certificate
-# then both the "ocsp.responderCertIssuerName" and
-# "ocsp.responderCertSerialNumber" properties must be used instead. When this
-# property is set then those two properties are ignored.
-#
-# Example,
-# ocsp.responderCertSubjectName="CN=OCSP Responder, O=XYZ Corp"
-
-#
-# Issuer name of the OCSP responder's certificate
-#
-# By default, the certificate of the OCSP responder is that of the issuer
-# of the certificate being validated. This property identifies the certificate
-# of the OCSP responder when the default does not apply. Its value is a string
-# distinguished name (defined in RFC 2253) which identifies a certificate in
-# the set of certificates supplied during cert path validation. When this
-# property is set then the "ocsp.responderCertSerialNumber" property must also
-# be set. When the "ocsp.responderCertSubjectName" property is set then this
-# property is ignored.
-#
-# Example,
-# ocsp.responderCertIssuerName="CN=Enterprise CA, O=XYZ Corp"
-
-#
-# Serial number of the OCSP responder's certificate
-#
-# By default, the certificate of the OCSP responder is that of the issuer
-# of the certificate being validated. This property identifies the certificate
-# of the OCSP responder when the default does not apply. Its value is a string
-# of hexadecimal digits (colon or space separators may be present) which
-# identifies a certificate in the set of certificates supplied during cert path
-# validation. When this property is set then the "ocsp.responderCertIssuerName"
-# property must also be set. When the "ocsp.responderCertSubjectName" property
-# is set then this property is ignored.
-#
-# Example,
-# ocsp.responderCertSerialNumber=2A:FF:00
-
-#
-# Policy for failed Kerberos KDC lookups:
-#
-# When a KDC is unavailable (network error, service failure, etc), it is
-# put inside a blacklist and accessed less often for future requests. The
-# value (case-insensitive) for this policy can be:
-#
-# tryLast
-# KDCs in the blacklist are always tried after those not on the list.
-#
-# tryLess[:max_retries,timeout]
-# KDCs in the blacklist are still tried by their order in the configuration,
-# but with smaller max_retries and timeout values. max_retries and timeout
-# are optional numerical parameters (default 1 and 5000, which means once
-# and 5 seconds). Please notes that if any of the values defined here is
-# more than what is defined in krb5.conf, it will be ignored.
-#
-# Whenever a KDC is detected as available, it is removed from the blacklist.
-# The blacklist is reset when krb5.conf is reloaded. You can add
-# refreshKrb5Config=true to a JAAS configuration file so that krb5.conf is
-# reloaded whenever a JAAS authentication is attempted.
-#
-# Example,
-# krb5.kdc.bad.policy = tryLast
-# krb5.kdc.bad.policy = tryLess:2,2000
-krb5.kdc.bad.policy = tryLast
-
-# Algorithm restrictions for certification path (CertPath) processing
-#
-# In some environments, certain algorithms or key lengths may be undesirable
-# for certification path building and validation. For example, "MD2" is
-# generally no longer considered to be a secure hash algorithm. This section
-# describes the mechanism for disabling algorithms based on algorithm name
-# and/or key length. This includes algorithms used in certificates, as well
-# as revocation information such as CRLs and signed OCSP Responses.
-#
-# The syntax of the disabled algorithm string is described as this Java
-# BNF-style:
-# DisabledAlgorithms:
-# " DisabledAlgorithm { , DisabledAlgorithm } "
-#
-# DisabledAlgorithm:
-# AlgorithmName [Constraint]
-#
-# AlgorithmName:
-# (see below)
-#
-# Constraint:
-# KeySizeConstraint
-#
-# KeySizeConstraint:
-# keySize Operator DecimalInteger
-#
-# Operator:
-# <= | < | == | != | >= | >
-#
-# DecimalInteger:
-# DecimalDigits
-#
-# DecimalDigits:
-# DecimalDigit {DecimalDigit}
-#
-# DecimalDigit: one of
-# 1 2 3 4 5 6 7 8 9 0
-#
-# The "AlgorithmName" is the standard algorithm name of the disabled
-# algorithm. See "Java Cryptography Architecture Standard Algorithm Name
-# Documentation" for information about Standard Algorithm Names. Matching
-# is performed using a case-insensitive sub-element matching rule. (For
-# example, in "SHA1withECDSA" the sub-elements are "SHA1" for hashing and
-# "ECDSA" for signatures.) If the assertion "AlgorithmName" is a
-# sub-element of the certificate algorithm name, the algorithm will be
-# rejected during certification path building and validation. For example,
-# the assertion algorithm name "DSA" will disable all certificate algorithms
-# that rely on DSA, such as NONEwithDSA, SHA1withDSA. However, the assertion
-# will not disable algorithms related to "ECDSA".
-#
-# A "Constraint" provides further guidance for the algorithm being specified.
-# The "KeySizeConstraint" requires a key of a valid size range if the
-# "AlgorithmName" is of a key algorithm. The "DecimalInteger" indicates the
-# key size specified in number of bits. For example, "RSA keySize <= 1024"
-# indicates that any RSA key with key size less than or equal to 1024 bits
-# should be disabled, and "RSA keySize < 1024, RSA keySize > 2048" indicates
-# that any RSA key with key size less than 1024 or greater than 2048 should
-# be disabled. Note that the "KeySizeConstraint" only makes sense to key
-# algorithms.
-#
-# Note: This property is currently used by Oracle's PKIX implementation. It
-# is not guaranteed to be examined and used by other implementations.
-#
-# Example:
-# jdk.certpath.disabledAlgorithms=MD2, DSA, RSA keySize < 2048
-#
-#
-jdk.certpath.disabledAlgorithms=MD2, MD5, RSA keySize < 1024
-
-# Algorithm restrictions for Secure Socket Layer/Transport Layer Security
-# (SSL/TLS) processing
-#
-# In some environments, certain algorithms or key lengths may be undesirable
-# when using SSL/TLS. This section describes the mechanism for disabling
-# algorithms during SSL/TLS security parameters negotiation, including cipher
-# suites selection, peer authentication and key exchange mechanisms.
-#
-# For PKI-based peer authentication and key exchange mechanisms, this list
-# of disabled algorithms will also be checked during certification path
-# building and validation, including algorithms used in certificates, as
-# well as revocation information such as CRLs and signed OCSP Responses.
-# This is in addition to the jdk.certpath.disabledAlgorithms property above.
-#
-# See the specification of "jdk.certpath.disabledAlgorithms" for the
-# syntax of the disabled algorithm string.
-#
-# Note: This property is currently used by Oracle's JSSE implementation.
-# It is not guaranteed to be examined and used by other implementations.
-#
-# Example:
-# jdk.tls.disabledAlgorithms=MD5, SHA1, DSA, RSA keySize < 2048
--- old/src/share/lib/security/java.security-macosx 2014-07-28 21:52:48.000000000 +0800
+++ /dev/null 2014-07-28 21:52:48.000000000 +0800
@@ -1,499 +0,0 @@
-#
-# This is the "master security properties file".
-#
-# An alternate java.security properties file may be specified
-# from the command line via the system property
-#
-# -Djava.security.properties=<URL>
-#
-# This properties file appends to the master security properties file.
-# If both properties files specify values for the same key, the value
-# from the command-line properties file is selected, as it is the last
-# one loaded.
-#
-# Also, if you specify
-#
-# -Djava.security.properties==<URL> (2 equals),
-#
-# then that properties file completely overrides the master security
-# properties file.
-#
-# To disable the ability to specify an additional properties file from
-# the command line, set the key security.overridePropertiesFile
-# to false in the master security properties file. It is set to true
-# by default.
-
-# In this file, various security properties are set for use by
-# java.security classes. This is where users can statically register
-# Cryptography Package Providers ("providers" for short). The term
-# "provider" refers to a package or set of packages that supply a
-# concrete implementation of a subset of the cryptography aspects of
-# the Java Security API. A provider may, for example, implement one or
-# more digital signature algorithms or message digest algorithms.
-#
-# Each provider must implement a subclass of the Provider class.
-# To register a provider in this master security properties file,
-# specify the Provider subclass name and priority in the format
-#
-# security.provider.<n>=<className>
-#
-# This declares a provider, and specifies its preference
-# order n. The preference order is the order in which providers are
-# searched for requested algorithms (when no specific provider is
-# requested). The order is 1-based; 1 is the most preferred, followed
-# by 2, and so on.
-#
-# <className> must specify the subclass of the Provider class whose
-# constructor sets the values of various properties that are required
-# for the Java Security API to look up the algorithms or other
-# facilities implemented by the provider.
-#
-# There must be at least one provider specification in java.security.
-# There is a default provider that comes standard with the JDK. It
-# is called the "SUN" provider, and its Provider subclass
-# named Sun appears in the sun.security.provider package. Thus, the
-# "SUN" provider is registered via the following:
-#
-# security.provider.1=sun.security.provider.Sun
-#
-# (The number 1 is used for the default provider.)
-#
-# Note: Providers can be dynamically registered instead by calls to
-# either the addProvider or insertProviderAt method in the Security
-# class.
-
-#
-# List of providers and their preference orders (see above):
-#
-security.provider.1=sun.security.provider.Sun
-security.provider.2=sun.security.rsa.SunRsaSign
-security.provider.3=sun.security.ec.SunEC
-security.provider.4=com.sun.net.ssl.internal.ssl.Provider
-security.provider.5=com.sun.crypto.provider.SunJCE
-security.provider.6=sun.security.jgss.SunProvider
-security.provider.7=com.sun.security.sasl.Provider
-security.provider.8=org.jcp.xml.dsig.internal.dom.XMLDSigRI
-security.provider.9=sun.security.smartcardio.SunPCSC
-security.provider.10=apple.security.AppleProvider
-
-#
-# Sun Provider SecureRandom seed source.
-#
-# Select the primary source of seed data for the "SHA1PRNG" and
-# "NativePRNG" SecureRandom implementations in the "Sun" provider.
-# (Other SecureRandom implementations might also use this property.)
-#
-# On Unix-like systems (for example, Solaris/Linux/MacOS), the
-# "NativePRNG" and "SHA1PRNG" implementations obtains seed data from
-# special device files such as file:/dev/random.
-#
-# On Windows systems, specifying the URLs "file:/dev/random" or
-# "file:/dev/urandom" will enable the native Microsoft CryptoAPI seeding
-# mechanism for SHA1PRNG.
-#
-# By default, an attempt is made to use the entropy gathering device
-# specified by the "securerandom.source" Security property. If an
-# exception occurs while accessing the specified URL:
-#
-# SHA1PRNG:
-# the traditional system/thread activity algorithm will be used.
-#
-# NativePRNG:
-# a default value of /dev/random will be used. If neither
-# are available, the implementation will be disabled.
-# "file" is the only currently supported protocol type.
-#
-# The entropy gathering device can also be specified with the System
-# property "java.security.egd". For example:
-#
-# % java -Djava.security.egd=file:/dev/random MainClass
-#
-# Specifying this System property will override the
-# "securerandom.source" Security property.
-#
-# In addition, if "file:/dev/random" or "file:/dev/urandom" is
-# specified, the "NativePRNG" implementation will be more preferred than
-# SHA1PRNG in the Sun provider.
-#
-securerandom.source=file:/dev/random
-
-#
-# A list of known strong SecureRandom implementations.
-#
-# To help guide applications in selecting a suitable strong
-# java.security.SecureRandom implementation, Java distributions should
-# indicate a list of known strong implementations using the property.
-#
-# This is a comma-separated list of algorithm and/or algorithm:provider
-# entries.
-#
-securerandom.strongAlgorithms=NativePRNGBlocking:SUN
-
-#
-# Class to instantiate as the javax.security.auth.login.Configuration
-# provider.
-#
-login.configuration.provider=sun.security.provider.ConfigFile
-
-#
-# Default login configuration file
-#
-#login.config.url.1=file:${user.home}/.java.login.config
-
-#
-# Class to instantiate as the system Policy. This is the name of the class
-# that will be used as the Policy object.
-#
-policy.provider=sun.security.provider.PolicyFile
-
-# The default is to have a single system-wide policy file,
-# and a policy file in the user's home directory.
-policy.url.1=file:${java.home}/lib/security/java.policy
-policy.url.2=file:${user.home}/.java.policy
-
-# whether or not we expand properties in the policy file
-# if this is set to false, properties (${...}) will not be expanded in policy
-# files.
-policy.expandProperties=true
-
-# whether or not we allow an extra policy to be passed on the command line
-# with -Djava.security.policy=somefile. Comment out this line to disable
-# this feature.
-policy.allowSystemProperty=true
-
-# whether or not we look into the IdentityScope for trusted Identities
-# when encountering a 1.1 signed JAR file. If the identity is found
-# and is trusted, we grant it AllPermission.
-policy.ignoreIdentityScope=false
-
-#
-# Default keystore type.
-#
-keystore.type=jks
-
-#
-# List of comma-separated packages that start with or equal this string
-# will cause a security exception to be thrown when
-# passed to checkPackageAccess unless the
-# corresponding RuntimePermission ("accessClassInPackage."+package) has
-# been granted.
-package.access=sun.,\
- com.sun.xml.internal.,\
- com.sun.imageio.,\
- com.sun.istack.internal.,\
- com.sun.jmx.,\
- com.sun.media.sound.,\
- com.sun.naming.internal.,\
- com.sun.proxy.,\
- com.sun.corba.se.,\
- com.sun.org.apache.bcel.internal.,\
- com.sun.org.apache.regexp.internal.,\
- com.sun.org.apache.xerces.internal.,\
- com.sun.org.apache.xpath.internal.,\
- com.sun.org.apache.xalan.internal.extensions.,\
- com.sun.org.apache.xalan.internal.lib.,\
- com.sun.org.apache.xalan.internal.res.,\
- com.sun.org.apache.xalan.internal.templates.,\
- com.sun.org.apache.xalan.internal.utils.,\
- com.sun.org.apache.xalan.internal.xslt.,\
- com.sun.org.apache.xalan.internal.xsltc.cmdline.,\
- com.sun.org.apache.xalan.internal.xsltc.compiler.,\
- com.sun.org.apache.xalan.internal.xsltc.trax.,\
- com.sun.org.apache.xalan.internal.xsltc.util.,\
- com.sun.org.apache.xml.internal.res.,\
- com.sun.org.apache.xml.internal.security.,\
- com.sun.org.apache.xml.internal.serializer.utils.,\
- com.sun.org.apache.xml.internal.utils.,\
- com.sun.org.glassfish.,\
- com.oracle.xmlns.internal.,\
- com.oracle.webservices.internal.,\
- org.jcp.xml.dsig.internal.,\
- jdk.internal.,\
- jdk.nashorn.internal.,\
- jdk.nashorn.tools.,\
- com.sun.activation.registries.,\
- apple.
-
-#
-# List of comma-separated packages that start with or equal this string
-# will cause a security exception to be thrown when
-# passed to checkPackageDefinition unless the
-# corresponding RuntimePermission ("defineClassInPackage."+package) has
-# been granted.
-#
-# by default, none of the class loaders supplied with the JDK call
-# checkPackageDefinition.
-#
-package.definition=sun.,\
- com.sun.xml.internal.,\
- com.sun.imageio.,\
- com.sun.istack.internal.,\
- com.sun.jmx.,\
- com.sun.media.sound.,\
- com.sun.naming.internal.,\
- com.sun.proxy.,\
- com.sun.corba.se.,\
- com.sun.org.apache.bcel.internal.,\
- com.sun.org.apache.regexp.internal.,\
- com.sun.org.apache.xerces.internal.,\
- com.sun.org.apache.xpath.internal.,\
- com.sun.org.apache.xalan.internal.extensions.,\
- com.sun.org.apache.xalan.internal.lib.,\
- com.sun.org.apache.xalan.internal.res.,\
- com.sun.org.apache.xalan.internal.templates.,\
- com.sun.org.apache.xalan.internal.utils.,\
- com.sun.org.apache.xalan.internal.xslt.,\
- com.sun.org.apache.xalan.internal.xsltc.cmdline.,\
- com.sun.org.apache.xalan.internal.xsltc.compiler.,\
- com.sun.org.apache.xalan.internal.xsltc.trax.,\
- com.sun.org.apache.xalan.internal.xsltc.util.,\
- com.sun.org.apache.xml.internal.res.,\
- com.sun.org.apache.xml.internal.security.,\
- com.sun.org.apache.xml.internal.serializer.utils.,\
- com.sun.org.apache.xml.internal.utils.,\
- com.sun.org.glassfish.,\
- com.oracle.xmlns.internal.,\
- com.oracle.webservices.internal.,\
- org.jcp.xml.dsig.internal.,\
- jdk.internal.,\
- jdk.nashorn.internal.,\
- jdk.nashorn.tools.,\
- com.sun.activation.registries.,\
- apple.
-
-#
-# Determines whether this properties file can be appended to
-# or overridden on the command line via -Djava.security.properties
-#
-security.overridePropertiesFile=true
-
-#
-# Determines the default key and trust manager factory algorithms for
-# the javax.net.ssl package.
-#
-ssl.KeyManagerFactory.algorithm=SunX509
-ssl.TrustManagerFactory.algorithm=PKIX
-
-#
-# The Java-level namelookup cache policy for successful lookups:
-#
-# any negative value: caching forever
-# any positive value: the number of seconds to cache an address for
-# zero: do not cache
-#
-# default value is forever (FOREVER). For security reasons, this
-# caching is made forever when a security manager is set. When a security
-# manager is not set, the default behavior in this implementation
-# is to cache for 30 seconds.
-#
-# NOTE: setting this to anything other than the default value can have
-# serious security implications. Do not set it unless
-# you are sure you are not exposed to DNS spoofing attack.
-#
-#networkaddress.cache.ttl=-1
-
-# The Java-level namelookup cache policy for failed lookups:
-#
-# any negative value: cache forever
-# any positive value: the number of seconds to cache negative lookup results
-# zero: do not cache
-#
-# In some Microsoft Windows networking environments that employ
-# the WINS name service in addition to DNS, name service lookups
-# that fail may take a noticeably long time to return (approx. 5 seconds).
-# For this reason the default caching policy is to maintain these
-# results for 10 seconds.
-#
-#
-networkaddress.cache.negative.ttl=10
-
-#
-# Properties to configure OCSP for certificate revocation checking
-#
-
-# Enable OCSP
-#
-# By default, OCSP is not used for certificate revocation checking.
-# This property enables the use of OCSP when set to the value "true".
-#
-# NOTE: SocketPermission is required to connect to an OCSP responder.
-#
-# Example,
-# ocsp.enable=true
-
-#
-# Location of the OCSP responder
-#
-# By default, the location of the OCSP responder is determined implicitly
-# from the certificate being validated. This property explicitly specifies
-# the location of the OCSP responder. The property is used when the
-# Authority Information Access extension (defined in RFC 3280) is absent
-# from the certificate or when it requires overriding.
-#
-# Example,
-# ocsp.responderURL=http://ocsp.example.net:80
-
-#
-# Subject name of the OCSP responder's certificate
-#
-# By default, the certificate of the OCSP responder is that of the issuer
-# of the certificate being validated. This property identifies the certificate
-# of the OCSP responder when the default does not apply. Its value is a string
-# distinguished name (defined in RFC 2253) which identifies a certificate in
-# the set of certificates supplied during cert path validation. In cases where
-# the subject name alone is not sufficient to uniquely identify the certificate
-# then both the "ocsp.responderCertIssuerName" and
-# "ocsp.responderCertSerialNumber" properties must be used instead. When this
-# property is set then those two properties are ignored.
-#
-# Example,
-# ocsp.responderCertSubjectName="CN=OCSP Responder, O=XYZ Corp"
-
-#
-# Issuer name of the OCSP responder's certificate
-#
-# By default, the certificate of the OCSP responder is that of the issuer
-# of the certificate being validated. This property identifies the certificate
-# of the OCSP responder when the default does not apply. Its value is a string
-# distinguished name (defined in RFC 2253) which identifies a certificate in
-# the set of certificates supplied during cert path validation. When this
-# property is set then the "ocsp.responderCertSerialNumber" property must also
-# be set. When the "ocsp.responderCertSubjectName" property is set then this
-# property is ignored.
-#
-# Example,
-# ocsp.responderCertIssuerName="CN=Enterprise CA, O=XYZ Corp"
-
-#
-# Serial number of the OCSP responder's certificate
-#
-# By default, the certificate of the OCSP responder is that of the issuer
-# of the certificate being validated. This property identifies the certificate
-# of the OCSP responder when the default does not apply. Its value is a string
-# of hexadecimal digits (colon or space separators may be present) which
-# identifies a certificate in the set of certificates supplied during cert path
-# validation. When this property is set then the "ocsp.responderCertIssuerName"
-# property must also be set. When the "ocsp.responderCertSubjectName" property
-# is set then this property is ignored.
-#
-# Example,
-# ocsp.responderCertSerialNumber=2A:FF:00
-
-#
-# Policy for failed Kerberos KDC lookups:
-#
-# When a KDC is unavailable (network error, service failure, etc), it is
-# put inside a blacklist and accessed less often for future requests. The
-# value (case-insensitive) for this policy can be:
-#
-# tryLast
-# KDCs in the blacklist are always tried after those not on the list.
-#
-# tryLess[:max_retries,timeout]
-# KDCs in the blacklist are still tried by their order in the configuration,
-# but with smaller max_retries and timeout values. max_retries and timeout
-# are optional numerical parameters (default 1 and 5000, which means once
-# and 5 seconds). Please notes that if any of the values defined here is
-# more than what is defined in krb5.conf, it will be ignored.
-#
-# Whenever a KDC is detected as available, it is removed from the blacklist.
-# The blacklist is reset when krb5.conf is reloaded. You can add
-# refreshKrb5Config=true to a JAAS configuration file so that krb5.conf is
-# reloaded whenever a JAAS authentication is attempted.
-#
-# Example,
-# krb5.kdc.bad.policy = tryLast
-# krb5.kdc.bad.policy = tryLess:2,2000
-krb5.kdc.bad.policy = tryLast
-
-# Algorithm restrictions for certification path (CertPath) processing
-#
-# In some environments, certain algorithms or key lengths may be undesirable
-# for certification path building and validation. For example, "MD2" is
-# generally no longer considered to be a secure hash algorithm. This section
-# describes the mechanism for disabling algorithms based on algorithm name
-# and/or key length. This includes algorithms used in certificates, as well
-# as revocation information such as CRLs and signed OCSP Responses.
-#
-# The syntax of the disabled algorithm string is described as this Java
-# BNF-style:
-# DisabledAlgorithms:
-# " DisabledAlgorithm { , DisabledAlgorithm } "
-#
-# DisabledAlgorithm:
-# AlgorithmName [Constraint]
-#
-# AlgorithmName:
-# (see below)
-#
-# Constraint:
-# KeySizeConstraint
-#
-# KeySizeConstraint:
-# keySize Operator DecimalInteger
-#
-# Operator:
-# <= | < | == | != | >= | >
-#
-# DecimalInteger:
-# DecimalDigits
-#
-# DecimalDigits:
-# DecimalDigit {DecimalDigit}
-#
-# DecimalDigit: one of
-# 1 2 3 4 5 6 7 8 9 0
-#
-# The "AlgorithmName" is the standard algorithm name of the disabled
-# algorithm. See "Java Cryptography Architecture Standard Algorithm Name
-# Documentation" for information about Standard Algorithm Names. Matching
-# is performed using a case-insensitive sub-element matching rule. (For
-# example, in "SHA1withECDSA" the sub-elements are "SHA1" for hashing and
-# "ECDSA" for signatures.) If the assertion "AlgorithmName" is a
-# sub-element of the certificate algorithm name, the algorithm will be
-# rejected during certification path building and validation. For example,
-# the assertion algorithm name "DSA" will disable all certificate algorithms
-# that rely on DSA, such as NONEwithDSA, SHA1withDSA. However, the assertion
-# will not disable algorithms related to "ECDSA".
-#
-# A "Constraint" provides further guidance for the algorithm being specified.
-# The "KeySizeConstraint" requires a key of a valid size range if the
-# "AlgorithmName" is of a key algorithm. The "DecimalInteger" indicates the
-# key size specified in number of bits. For example, "RSA keySize <= 1024"
-# indicates that any RSA key with key size less than or equal to 1024 bits
-# should be disabled, and "RSA keySize < 1024, RSA keySize > 2048" indicates
-# that any RSA key with key size less than 1024 or greater than 2048 should
-# be disabled. Note that the "KeySizeConstraint" only makes sense to key
-# algorithms.
-#
-# Note: This property is currently used by Oracle's PKIX implementation. It
-# is not guaranteed to be examined and used by other implementations.
-#
-# Example:
-# jdk.certpath.disabledAlgorithms=MD2, DSA, RSA keySize < 2048
-#
-#
-jdk.certpath.disabledAlgorithms=MD2, MD5, RSA keySize < 1024
-
-# Algorithm restrictions for Secure Socket Layer/Transport Layer Security
-# (SSL/TLS) processing
-#
-# In some environments, certain algorithms or key lengths may be undesirable
-# when using SSL/TLS. This section describes the mechanism for disabling
-# algorithms during SSL/TLS security parameters negotiation, including cipher
-# suites selection, peer authentication and key exchange mechanisms.
-#
-# For PKI-based peer authentication and key exchange mechanisms, this list
-# of disabled algorithms will also be checked during certification path
-# building and validation, including algorithms used in certificates, as
-# well as revocation information such as CRLs and signed OCSP Responses.
-# This is in addition to the jdk.certpath.disabledAlgorithms property above.
-#
-# See the specification of "jdk.certpath.disabledAlgorithms" for the
-# syntax of the disabled algorithm string.
-#
-# Note: This property is currently used by Oracle's JSSE implementation.
-# It is not guaranteed to be examined and used by other implementations.
-#
-# Example:
-# jdk.tls.disabledAlgorithms=MD5, SHA1, DSA, RSA keySize < 2048
--- old/src/share/lib/security/java.security-windows 2014-07-28 21:52:49.000000000 +0800
+++ /dev/null 2014-07-28 21:52:49.000000000 +0800
@@ -1,499 +0,0 @@
-#
-# This is the "master security properties file".
-#
-# An alternate java.security properties file may be specified
-# from the command line via the system property
-#
-# -Djava.security.properties=<URL>
-#
-# This properties file appends to the master security properties file.
-# If both properties files specify values for the same key, the value
-# from the command-line properties file is selected, as it is the last
-# one loaded.
-#
-# Also, if you specify
-#
-# -Djava.security.properties==<URL> (2 equals),
-#
-# then that properties file completely overrides the master security
-# properties file.
-#
-# To disable the ability to specify an additional properties file from
-# the command line, set the key security.overridePropertiesFile
-# to false in the master security properties file. It is set to true
-# by default.
-
-# In this file, various security properties are set for use by
-# java.security classes. This is where users can statically register
-# Cryptography Package Providers ("providers" for short). The term
-# "provider" refers to a package or set of packages that supply a
-# concrete implementation of a subset of the cryptography aspects of
-# the Java Security API. A provider may, for example, implement one or
-# more digital signature algorithms or message digest algorithms.
-#
-# Each provider must implement a subclass of the Provider class.
-# To register a provider in this master security properties file,
-# specify the Provider subclass name and priority in the format
-#
-# security.provider.<n>=<className>
-#
-# This declares a provider, and specifies its preference
-# order n. The preference order is the order in which providers are
-# searched for requested algorithms (when no specific provider is
-# requested). The order is 1-based; 1 is the most preferred, followed
-# by 2, and so on.
-#
-# <className> must specify the subclass of the Provider class whose
-# constructor sets the values of various properties that are required
-# for the Java Security API to look up the algorithms or other
-# facilities implemented by the provider.
-#
-# There must be at least one provider specification in java.security.
-# There is a default provider that comes standard with the JDK. It
-# is called the "SUN" provider, and its Provider subclass
-# named Sun appears in the sun.security.provider package. Thus, the
-# "SUN" provider is registered via the following:
-#
-# security.provider.1=sun.security.provider.Sun
-#
-# (The number 1 is used for the default provider.)
-#
-# Note: Providers can be dynamically registered instead by calls to
-# either the addProvider or insertProviderAt method in the Security
-# class.
-
-#
-# List of providers and their preference orders (see above):
-#
-security.provider.1=sun.security.provider.Sun
-security.provider.2=sun.security.rsa.SunRsaSign
-security.provider.3=sun.security.ec.SunEC
-security.provider.4=com.sun.net.ssl.internal.ssl.Provider
-security.provider.5=com.sun.crypto.provider.SunJCE
-security.provider.6=sun.security.jgss.SunProvider
-security.provider.7=com.sun.security.sasl.Provider
-security.provider.8=org.jcp.xml.dsig.internal.dom.XMLDSigRI
-security.provider.9=sun.security.smartcardio.SunPCSC
-security.provider.10=sun.security.mscapi.SunMSCAPI
-
-#
-# Sun Provider SecureRandom seed source.
-#
-# Select the primary source of seed data for the "SHA1PRNG" and
-# "NativePRNG" SecureRandom implementations in the "Sun" provider.
-# (Other SecureRandom implementations might also use this property.)
-#
-# On Unix-like systems (for example, Solaris/Linux/MacOS), the
-# "NativePRNG" and "SHA1PRNG" implementations obtains seed data from
-# special device files such as file:/dev/random.
-#
-# On Windows systems, specifying the URLs "file:/dev/random" or
-# "file:/dev/urandom" will enable the native Microsoft CryptoAPI seeding
-# mechanism for SHA1PRNG.
-#
-# By default, an attempt is made to use the entropy gathering device
-# specified by the "securerandom.source" Security property. If an
-# exception occurs while accessing the specified URL:
-#
-# SHA1PRNG:
-# the traditional system/thread activity algorithm will be used.
-#
-# NativePRNG:
-# a default value of /dev/random will be used. If neither
-# are available, the implementation will be disabled.
-# "file" is the only currently supported protocol type.
-#
-# The entropy gathering device can also be specified with the System
-# property "java.security.egd". For example:
-#
-# % java -Djava.security.egd=file:/dev/random MainClass
-#
-# Specifying this System property will override the
-# "securerandom.source" Security property.
-#
-# In addition, if "file:/dev/random" or "file:/dev/urandom" is
-# specified, the "NativePRNG" implementation will be more preferred than
-# SHA1PRNG in the Sun provider.
-#
-securerandom.source=file:/dev/random
-
-#
-# A list of known strong SecureRandom implementations.
-#
-# To help guide applications in selecting a suitable strong
-# java.security.SecureRandom implementation, Java distributions should
-# indicate a list of known strong implementations using the property.
-#
-# This is a comma-separated list of algorithm and/or algorithm:provider
-# entries.
-#
-securerandom.strongAlgorithms=Windows-PRNG:SunMSCAPI,SHA1PRNG:SUN
-
-#
-# Class to instantiate as the javax.security.auth.login.Configuration
-# provider.
-#
-login.configuration.provider=sun.security.provider.ConfigFile
-
-#
-# Default login configuration file
-#
-#login.config.url.1=file:${user.home}/.java.login.config
-
-#
-# Class to instantiate as the system Policy. This is the name of the class
-# that will be used as the Policy object.
-#
-policy.provider=sun.security.provider.PolicyFile
-
-# The default is to have a single system-wide policy file,
-# and a policy file in the user's home directory.
-policy.url.1=file:${java.home}/lib/security/java.policy
-policy.url.2=file:${user.home}/.java.policy
-
-# whether or not we expand properties in the policy file
-# if this is set to false, properties (${...}) will not be expanded in policy
-# files.
-policy.expandProperties=true
-
-# whether or not we allow an extra policy to be passed on the command line
-# with -Djava.security.policy=somefile. Comment out this line to disable
-# this feature.
-policy.allowSystemProperty=true
-
-# whether or not we look into the IdentityScope for trusted Identities
-# when encountering a 1.1 signed JAR file. If the identity is found
-# and is trusted, we grant it AllPermission.
-policy.ignoreIdentityScope=false
-
-#
-# Default keystore type.
-#
-keystore.type=jks
-
-#
-# List of comma-separated packages that start with or equal this string
-# will cause a security exception to be thrown when
-# passed to checkPackageAccess unless the
-# corresponding RuntimePermission ("accessClassInPackage."+package) has
-# been granted.
-package.access=sun.,\
- com.sun.xml.internal.,\
- com.sun.imageio.,\
- com.sun.istack.internal.,\
- com.sun.jmx.,\
- com.sun.media.sound.,\
- com.sun.naming.internal.,\
- com.sun.proxy.,\
- com.sun.corba.se.,\
- com.sun.org.apache.bcel.internal.,\
- com.sun.org.apache.regexp.internal.,\
- com.sun.org.apache.xerces.internal.,\
- com.sun.org.apache.xpath.internal.,\
- com.sun.org.apache.xalan.internal.extensions.,\
- com.sun.org.apache.xalan.internal.lib.,\
- com.sun.org.apache.xalan.internal.res.,\
- com.sun.org.apache.xalan.internal.templates.,\
- com.sun.org.apache.xalan.internal.utils.,\
- com.sun.org.apache.xalan.internal.xslt.,\
- com.sun.org.apache.xalan.internal.xsltc.cmdline.,\
- com.sun.org.apache.xalan.internal.xsltc.compiler.,\
- com.sun.org.apache.xalan.internal.xsltc.trax.,\
- com.sun.org.apache.xalan.internal.xsltc.util.,\
- com.sun.org.apache.xml.internal.res.,\
- com.sun.org.apache.xml.internal.security.,\
- com.sun.org.apache.xml.internal.serializer.utils.,\
- com.sun.org.apache.xml.internal.utils.,\
- com.sun.org.glassfish.,\
- com.oracle.xmlns.internal.,\
- com.oracle.webservices.internal.,\
- org.jcp.xml.dsig.internal.,\
- jdk.internal.,\
- jdk.nashorn.internal.,\
- jdk.nashorn.tools.,\
- com.sun.activation.registries.,\
- com.sun.java.accessibility.
-
-#
-# List of comma-separated packages that start with or equal this string
-# will cause a security exception to be thrown when
-# passed to checkPackageDefinition unless the
-# corresponding RuntimePermission ("defineClassInPackage."+package) has
-# been granted.
-#
-# by default, none of the class loaders supplied with the JDK call
-# checkPackageDefinition.
-#
-package.definition=sun.,\
- com.sun.xml.internal.,\
- com.sun.imageio.,\
- com.sun.istack.internal.,\
- com.sun.jmx.,\
- com.sun.media.sound.,\
- com.sun.naming.internal.,\
- com.sun.proxy.,\
- com.sun.corba.se.,\
- com.sun.org.apache.bcel.internal.,\
- com.sun.org.apache.regexp.internal.,\
- com.sun.org.apache.xerces.internal.,\
- com.sun.org.apache.xpath.internal.,\
- com.sun.org.apache.xalan.internal.extensions.,\
- com.sun.org.apache.xalan.internal.lib.,\
- com.sun.org.apache.xalan.internal.res.,\
- com.sun.org.apache.xalan.internal.templates.,\
- com.sun.org.apache.xalan.internal.utils.,\
- com.sun.org.apache.xalan.internal.xslt.,\
- com.sun.org.apache.xalan.internal.xsltc.cmdline.,\
- com.sun.org.apache.xalan.internal.xsltc.compiler.,\
- com.sun.org.apache.xalan.internal.xsltc.trax.,\
- com.sun.org.apache.xalan.internal.xsltc.util.,\
- com.sun.org.apache.xml.internal.res.,\
- com.sun.org.apache.xml.internal.security.,\
- com.sun.org.apache.xml.internal.serializer.utils.,\
- com.sun.org.apache.xml.internal.utils.,\
- com.sun.org.glassfish.,\
- com.oracle.xmlns.internal.,\
- com.oracle.webservices.internal.,\
- org.jcp.xml.dsig.internal.,\
- jdk.internal.,\
- jdk.nashorn.internal.,\
- jdk.nashorn.tools.,\
- com.sun.activation.registries.,\
- com.sun.java.accessibility.
-
-#
-# Determines whether this properties file can be appended to
-# or overridden on the command line via -Djava.security.properties
-#
-security.overridePropertiesFile=true
-
-#
-# Determines the default key and trust manager factory algorithms for
-# the javax.net.ssl package.
-#
-ssl.KeyManagerFactory.algorithm=SunX509
-ssl.TrustManagerFactory.algorithm=PKIX
-
-#
-# The Java-level namelookup cache policy for successful lookups:
-#
-# any negative value: caching forever
-# any positive value: the number of seconds to cache an address for
-# zero: do not cache
-#
-# default value is forever (FOREVER). For security reasons, this
-# caching is made forever when a security manager is set. When a security
-# manager is not set, the default behavior in this implementation
-# is to cache for 30 seconds.
-#
-# NOTE: setting this to anything other than the default value can have
-# serious security implications. Do not set it unless
-# you are sure you are not exposed to DNS spoofing attack.
-#
-#networkaddress.cache.ttl=-1
-
-# The Java-level namelookup cache policy for failed lookups:
-#
-# any negative value: cache forever
-# any positive value: the number of seconds to cache negative lookup results
-# zero: do not cache
-#
-# In some Microsoft Windows networking environments that employ
-# the WINS name service in addition to DNS, name service lookups
-# that fail may take a noticeably long time to return (approx. 5 seconds).
-# For this reason the default caching policy is to maintain these
-# results for 10 seconds.
-#
-#
-networkaddress.cache.negative.ttl=10
-
-#
-# Properties to configure OCSP for certificate revocation checking
-#
-
-# Enable OCSP
-#
-# By default, OCSP is not used for certificate revocation checking.
-# This property enables the use of OCSP when set to the value "true".
-#
-# NOTE: SocketPermission is required to connect to an OCSP responder.
-#
-# Example,
-# ocsp.enable=true
-
-#
-# Location of the OCSP responder
-#
-# By default, the location of the OCSP responder is determined implicitly
-# from the certificate being validated. This property explicitly specifies
-# the location of the OCSP responder. The property is used when the
-# Authority Information Access extension (defined in RFC 3280) is absent
-# from the certificate or when it requires overriding.
-#
-# Example,
-# ocsp.responderURL=http://ocsp.example.net:80
-
-#
-# Subject name of the OCSP responder's certificate
-#
-# By default, the certificate of the OCSP responder is that of the issuer
-# of the certificate being validated. This property identifies the certificate
-# of the OCSP responder when the default does not apply. Its value is a string
-# distinguished name (defined in RFC 2253) which identifies a certificate in
-# the set of certificates supplied during cert path validation. In cases where
-# the subject name alone is not sufficient to uniquely identify the certificate
-# then both the "ocsp.responderCertIssuerName" and
-# "ocsp.responderCertSerialNumber" properties must be used instead. When this
-# property is set then those two properties are ignored.
-#
-# Example,
-# ocsp.responderCertSubjectName="CN=OCSP Responder, O=XYZ Corp"
-
-#
-# Issuer name of the OCSP responder's certificate
-#
-# By default, the certificate of the OCSP responder is that of the issuer
-# of the certificate being validated. This property identifies the certificate
-# of the OCSP responder when the default does not apply. Its value is a string
-# distinguished name (defined in RFC 2253) which identifies a certificate in
-# the set of certificates supplied during cert path validation. When this
-# property is set then the "ocsp.responderCertSerialNumber" property must also
-# be set. When the "ocsp.responderCertSubjectName" property is set then this
-# property is ignored.
-#
-# Example,
-# ocsp.responderCertIssuerName="CN=Enterprise CA, O=XYZ Corp"
-
-#
-# Serial number of the OCSP responder's certificate
-#
-# By default, the certificate of the OCSP responder is that of the issuer
-# of the certificate being validated. This property identifies the certificate
-# of the OCSP responder when the default does not apply. Its value is a string
-# of hexadecimal digits (colon or space separators may be present) which
-# identifies a certificate in the set of certificates supplied during cert path
-# validation. When this property is set then the "ocsp.responderCertIssuerName"
-# property must also be set. When the "ocsp.responderCertSubjectName" property
-# is set then this property is ignored.
-#
-# Example,
-# ocsp.responderCertSerialNumber=2A:FF:00
-
-#
-# Policy for failed Kerberos KDC lookups:
-#
-# When a KDC is unavailable (network error, service failure, etc), it is
-# put inside a blacklist and accessed less often for future requests. The
-# value (case-insensitive) for this policy can be:
-#
-# tryLast
-# KDCs in the blacklist are always tried after those not on the list.
-#
-# tryLess[:max_retries,timeout]
-# KDCs in the blacklist are still tried by their order in the configuration,
-# but with smaller max_retries and timeout values. max_retries and timeout
-# are optional numerical parameters (default 1 and 5000, which means once
-# and 5 seconds). Please notes that if any of the values defined here is
-# more than what is defined in krb5.conf, it will be ignored.
-#
-# Whenever a KDC is detected as available, it is removed from the blacklist.
-# The blacklist is reset when krb5.conf is reloaded. You can add
-# refreshKrb5Config=true to a JAAS configuration file so that krb5.conf is
-# reloaded whenever a JAAS authentication is attempted.
-#
-# Example,
-# krb5.kdc.bad.policy = tryLast
-# krb5.kdc.bad.policy = tryLess:2,2000
-krb5.kdc.bad.policy = tryLast
-
-# Algorithm restrictions for certification path (CertPath) processing
-#
-# In some environments, certain algorithms or key lengths may be undesirable
-# for certification path building and validation. For example, "MD2" is
-# generally no longer considered to be a secure hash algorithm. This section
-# describes the mechanism for disabling algorithms based on algorithm name
-# and/or key length. This includes algorithms used in certificates, as well
-# as revocation information such as CRLs and signed OCSP Responses.
-#
-# The syntax of the disabled algorithm string is described as this Java
-# BNF-style:
-# DisabledAlgorithms:
-# " DisabledAlgorithm { , DisabledAlgorithm } "
-#
-# DisabledAlgorithm:
-# AlgorithmName [Constraint]
-#
-# AlgorithmName:
-# (see below)
-#
-# Constraint:
-# KeySizeConstraint
-#
-# KeySizeConstraint:
-# keySize Operator DecimalInteger
-#
-# Operator:
-# <= | < | == | != | >= | >
-#
-# DecimalInteger:
-# DecimalDigits
-#
-# DecimalDigits:
-# DecimalDigit {DecimalDigit}
-#
-# DecimalDigit: one of
-# 1 2 3 4 5 6 7 8 9 0
-#
-# The "AlgorithmName" is the standard algorithm name of the disabled
-# algorithm. See "Java Cryptography Architecture Standard Algorithm Name
-# Documentation" for information about Standard Algorithm Names. Matching
-# is performed using a case-insensitive sub-element matching rule. (For
-# example, in "SHA1withECDSA" the sub-elements are "SHA1" for hashing and
-# "ECDSA" for signatures.) If the assertion "AlgorithmName" is a
-# sub-element of the certificate algorithm name, the algorithm will be
-# rejected during certification path building and validation. For example,
-# the assertion algorithm name "DSA" will disable all certificate algorithms
-# that rely on DSA, such as NONEwithDSA, SHA1withDSA. However, the assertion
-# will not disable algorithms related to "ECDSA".
-#
-# A "Constraint" provides further guidance for the algorithm being specified.
-# The "KeySizeConstraint" requires a key of a valid size range if the
-# "AlgorithmName" is of a key algorithm. The "DecimalInteger" indicates the
-# key size specified in number of bits. For example, "RSA keySize <= 1024"
-# indicates that any RSA key with key size less than or equal to 1024 bits
-# should be disabled, and "RSA keySize < 1024, RSA keySize > 2048" indicates
-# that any RSA key with key size less than 1024 or greater than 2048 should
-# be disabled. Note that the "KeySizeConstraint" only makes sense to key
-# algorithms.
-#
-# Note: This property is currently used by Oracle's PKIX implementation. It
-# is not guaranteed to be examined and used by other implementations.
-#
-# Example:
-# jdk.certpath.disabledAlgorithms=MD2, DSA, RSA keySize < 2048
-#
-#
-jdk.certpath.disabledAlgorithms=MD2, MD5, RSA keySize < 1024
-
-# Algorithm restrictions for Secure Socket Layer/Transport Layer Security
-# (SSL/TLS) processing
-#
-# In some environments, certain algorithms or key lengths may be undesirable
-# when using SSL/TLS. This section describes the mechanism for disabling
-# algorithms during SSL/TLS security parameters negotiation, including cipher
-# suites selection, peer authentication and key exchange mechanisms.
-#
-# For PKI-based peer authentication and key exchange mechanisms, this list
-# of disabled algorithms will also be checked during certification path
-# building and validation, including algorithms used in certificates, as
-# well as revocation information such as CRLs and signed OCSP Responses.
-# This is in addition to the jdk.certpath.disabledAlgorithms property above.
-#
-# See the specification of "jdk.certpath.disabledAlgorithms" for the
-# syntax of the disabled algorithm string.
-#
-# Note: This property is currently used by Oracle's JSSE implementation.
-# It is not guaranteed to be examined and used by other implementations.
-#
-# Example:
-# jdk.tls.disabledAlgorithms=MD5, SHA1, DSA, RSA keySize < 2048