1 # 2 # This is the "master security properties file". 3 # 4 # An alternate java.security properties file may be specified 5 # from the command line via the system property 6 # 7 # -Djava.security.properties=<URL> 8 # 9 # This properties file appends to the master security properties file. 10 # If both properties files specify values for the same key, the value 11 # from the command-line properties file is selected, as it is the last 12 # one loaded. 13 # 14 # Also, if you specify 15 # 16 # -Djava.security.properties==<URL> (2 equals), 17 # 18 # then that properties file completely overrides the master security 19 # properties file. 20 # 21 # To disable the ability to specify an additional properties file from 22 # the command line, set the key security.overridePropertiesFile 23 # to false in the master security properties file. It is set to true 24 # by default. 25 26 # In this file, various security properties are set for use by 27 # java.security classes. This is where users can statically register 28 # Cryptography Package Providers ("providers" for short). The term 29 # "provider" refers to a package or set of packages that supply a 30 # concrete implementation of a subset of the cryptography aspects of 31 # the Java Security API. A provider may, for example, implement one or 32 # more digital signature algorithms or message digest algorithms. 33 # 34 # Each provider must implement a subclass of the Provider class. 35 # To register a provider in this master security properties file, 36 # specify the Provider subclass name and priority in the format 37 # 38 # security.provider.<n>=<className> 39 # 40 # This declares a provider, and specifies its preference 41 # order n. The preference order is the order in which providers are 42 # searched for requested algorithms (when no specific provider is 43 # requested). The order is 1-based; 1 is the most preferred, followed 44 # by 2, and so on. 45 # 46 # <className> must specify the subclass of the Provider class whose 47 # constructor sets the values of various properties that are required 48 # for the Java Security API to look up the algorithms or other 49 # facilities implemented by the provider. 50 # 51 # There must be at least one provider specification in java.security. 52 # There is a default provider that comes standard with the JDK. It 53 # is called the "SUN" provider, and its Provider subclass 54 # named Sun appears in the sun.security.provider package. Thus, the 55 # "SUN" provider is registered via the following: 56 # 57 # security.provider.1=sun.security.provider.Sun 58 # 59 # (The number 1 is used for the default provider.) 60 # 61 # Note: Providers can be dynamically registered instead by calls to 62 # either the addProvider or insertProviderAt method in the Security 63 # class. 64 65 # 66 # List of providers and their preference orders (see above): 67 # 68 security.provider.1=com.oracle.security.ucrypto.UcryptoProvider ${java.home}/lib/security/ucrypto-solaris.cfg 69 security.provider.2=sun.security.pkcs11.SunPKCS11 ${java.home}/lib/security/sunpkcs11-solaris.cfg 70 security.provider.3=sun.security.provider.Sun 71 security.provider.4=sun.security.rsa.SunRsaSign 72 security.provider.5=sun.security.ec.SunEC 73 security.provider.6=com.sun.net.ssl.internal.ssl.Provider 74 security.provider.7=com.sun.crypto.provider.SunJCE 75 security.provider.8=sun.security.jgss.SunProvider 76 security.provider.9=com.sun.security.sasl.Provider 77 security.provider.10=org.jcp.xml.dsig.internal.dom.XMLDSigRI 78 security.provider.11=sun.security.smartcardio.SunPCSC 79 80 # 81 # Sun Provider SecureRandom seed source. 82 # 83 # Select the primary source of seed data for the "SHA1PRNG" and 84 # "NativePRNG" SecureRandom implementations in the "Sun" provider. 85 # (Other SecureRandom implementations might also use this property.) 86 # 87 # On Unix-like systems (for example, Solaris/Linux/MacOS), the 88 # "NativePRNG" and "SHA1PRNG" implementations obtains seed data from 89 # special device files such as file:/dev/random. 90 # 91 # On Windows systems, specifying the URLs "file:/dev/random" or 92 # "file:/dev/urandom" will enable the native Microsoft CryptoAPI seeding 93 # mechanism for SHA1PRNG. 94 # 95 # By default, an attempt is made to use the entropy gathering device 96 # specified by the "securerandom.source" Security property. If an 97 # exception occurs while accessing the specified URL: 98 # 99 # SHA1PRNG: 100 # the traditional system/thread activity algorithm will be used. 101 # 102 # NativePRNG: 103 # a default value of /dev/random will be used. If neither 104 # are available, the implementation will be disabled. 105 # "file" is the only currently supported protocol type. 106 # 107 # The entropy gathering device can also be specified with the System 108 # property "java.security.egd". For example: 109 # 110 # % java -Djava.security.egd=file:/dev/random MainClass 111 # 112 # Specifying this System property will override the 113 # "securerandom.source" Security property. 114 # 115 # In addition, if "file:/dev/random" or "file:/dev/urandom" is 116 # specified, the "NativePRNG" implementation will be more preferred than 117 # SHA1PRNG in the Sun provider. 118 # 119 securerandom.source=file:/dev/random 120 121 # 122 # A list of known strong SecureRandom implementations. 123 # 124 # To help guide applications in selecting a suitable strong 125 # java.security.SecureRandom implementation, Java distributions should 126 # indicate a list of known strong implementations using the property. 127 # 128 # This is a comma-separated list of algorithm and/or algorithm:provider 129 # entries. 130 # 131 securerandom.strongAlgorithms=NativePRNGBlocking:SUN 132 133 # 134 # Class to instantiate as the javax.security.auth.login.Configuration 135 # provider. 136 # 137 login.configuration.provider=sun.security.provider.ConfigFile 138 139 # 140 # Default login configuration file 141 # 142 #login.config.url.1=file:${user.home}/.java.login.config 143 144 # 145 # Class to instantiate as the system Policy. This is the name of the class 146 # that will be used as the Policy object. 147 # 148 policy.provider=sun.security.provider.PolicyFile 149 150 # The default is to have a single system-wide policy file, 151 # and a policy file in the user's home directory. 152 policy.url.1=file:${java.home}/lib/security/java.policy 153 policy.url.2=file:${user.home}/.java.policy 154 155 # whether or not we expand properties in the policy file 156 # if this is set to false, properties (${...}) will not be expanded in policy 157 # files. 158 policy.expandProperties=true 159 160 # whether or not we allow an extra policy to be passed on the command line 161 # with -Djava.security.policy=somefile. Comment out this line to disable 162 # this feature. 163 policy.allowSystemProperty=true 164 165 # whether or not we look into the IdentityScope for trusted Identities 166 # when encountering a 1.1 signed JAR file. If the identity is found 167 # and is trusted, we grant it AllPermission. 168 policy.ignoreIdentityScope=false 169 170 # 171 # Default keystore type. 172 # 173 keystore.type=jks 174 175 # 176 # List of comma-separated packages that start with or equal this string 177 # will cause a security exception to be thrown when 178 # passed to checkPackageAccess unless the 179 # corresponding RuntimePermission ("accessClassInPackage."+package) has 180 # been granted. 181 package.access=sun.,\ 182 com.sun.xml.internal.,\ 183 com.sun.imageio.,\ 184 com.sun.istack.internal.,\ 185 com.sun.jmx.,\ 186 com.sun.media.sound.,\ 187 com.sun.naming.internal.,\ 188 com.sun.proxy.,\ 189 com.sun.corba.se.,\ 190 com.sun.org.apache.bcel.internal.,\ 191 com.sun.org.apache.regexp.internal.,\ 192 com.sun.org.apache.xerces.internal.,\ 193 com.sun.org.apache.xpath.internal.,\ 194 com.sun.org.apache.xalan.internal.extensions.,\ 195 com.sun.org.apache.xalan.internal.lib.,\ 196 com.sun.org.apache.xalan.internal.res.,\ 197 com.sun.org.apache.xalan.internal.templates.,\ 198 com.sun.org.apache.xalan.internal.utils.,\ 199 com.sun.org.apache.xalan.internal.xslt.,\ 200 com.sun.org.apache.xalan.internal.xsltc.cmdline.,\ 201 com.sun.org.apache.xalan.internal.xsltc.compiler.,\ 202 com.sun.org.apache.xalan.internal.xsltc.trax.,\ 203 com.sun.org.apache.xalan.internal.xsltc.util.,\ 204 com.sun.org.apache.xml.internal.res.,\ 205 com.sun.org.apache.xml.internal.security.,\ 206 com.sun.org.apache.xml.internal.serializer.utils.,\ 207 com.sun.org.apache.xml.internal.utils.,\ 208 com.sun.org.glassfish.,\ 209 com.oracle.xmlns.internal.,\ 210 com.oracle.webservices.internal.,\ 211 org.jcp.xml.dsig.internal.,\ 212 jdk.internal.,\ 213 jdk.nashorn.internal.,\ 214 jdk.nashorn.tools.,\ 215 com.sun.activation.registries. 216 217 # 218 # List of comma-separated packages that start with or equal this string 219 # will cause a security exception to be thrown when 220 # passed to checkPackageDefinition unless the 221 # corresponding RuntimePermission ("defineClassInPackage."+package) has 222 # been granted. 223 # 224 # by default, none of the class loaders supplied with the JDK call 225 # checkPackageDefinition. 226 # 227 package.definition=sun.,\ 228 com.sun.xml.internal.,\ 229 com.sun.imageio.,\ 230 com.sun.istack.internal.,\ 231 com.sun.jmx.,\ 232 com.sun.media.sound.,\ 233 com.sun.naming.internal.,\ 234 com.sun.proxy.,\ 235 com.sun.corba.se.,\ 236 com.sun.org.apache.bcel.internal.,\ 237 com.sun.org.apache.regexp.internal.,\ 238 com.sun.org.apache.xerces.internal.,\ 239 com.sun.org.apache.xpath.internal.,\ 240 com.sun.org.apache.xalan.internal.extensions.,\ 241 com.sun.org.apache.xalan.internal.lib.,\ 242 com.sun.org.apache.xalan.internal.res.,\ 243 com.sun.org.apache.xalan.internal.templates.,\ 244 com.sun.org.apache.xalan.internal.utils.,\ 245 com.sun.org.apache.xalan.internal.xslt.,\ 246 com.sun.org.apache.xalan.internal.xsltc.cmdline.,\ 247 com.sun.org.apache.xalan.internal.xsltc.compiler.,\ 248 com.sun.org.apache.xalan.internal.xsltc.trax.,\ 249 com.sun.org.apache.xalan.internal.xsltc.util.,\ 250 com.sun.org.apache.xml.internal.res.,\ 251 com.sun.org.apache.xml.internal.security.,\ 252 com.sun.org.apache.xml.internal.serializer.utils.,\ 253 com.sun.org.apache.xml.internal.utils.,\ 254 com.sun.org.glassfish.,\ 255 com.oracle.xmlns.internal.,\ 256 com.oracle.webservices.internal.,\ 257 org.jcp.xml.dsig.internal.,\ 258 jdk.internal.,\ 259 jdk.nashorn.internal.,\ 260 jdk.nashorn.tools.,\ 261 com.sun.activation.registries. 262 263 # 264 # Determines whether this properties file can be appended to 265 # or overridden on the command line via -Djava.security.properties 266 # 267 security.overridePropertiesFile=true 268 269 # 270 # Determines the default key and trust manager factory algorithms for 271 # the javax.net.ssl package. 272 # 273 ssl.KeyManagerFactory.algorithm=SunX509 274 ssl.TrustManagerFactory.algorithm=PKIX 275 276 # 277 # The Java-level namelookup cache policy for successful lookups: 278 # 279 # any negative value: caching forever 280 # any positive value: the number of seconds to cache an address for 281 # zero: do not cache 282 # 283 # default value is forever (FOREVER). For security reasons, this 284 # caching is made forever when a security manager is set. When a security 285 # manager is not set, the default behavior in this implementation 286 # is to cache for 30 seconds. 287 # 288 # NOTE: setting this to anything other than the default value can have 289 # serious security implications. Do not set it unless 290 # you are sure you are not exposed to DNS spoofing attack. 291 # 292 #networkaddress.cache.ttl=-1 293 294 # The Java-level namelookup cache policy for failed lookups: 295 # 296 # any negative value: cache forever 297 # any positive value: the number of seconds to cache negative lookup results 298 # zero: do not cache 299 # 300 # In some Microsoft Windows networking environments that employ 301 # the WINS name service in addition to DNS, name service lookups 302 # that fail may take a noticeably long time to return (approx. 5 seconds). 303 # For this reason the default caching policy is to maintain these 304 # results for 10 seconds. 305 # 306 # 307 networkaddress.cache.negative.ttl=10 308 309 # 310 # Properties to configure OCSP for certificate revocation checking 311 # 312 313 # Enable OCSP 314 # 315 # By default, OCSP is not used for certificate revocation checking. 316 # This property enables the use of OCSP when set to the value "true". 317 # 318 # NOTE: SocketPermission is required to connect to an OCSP responder. 319 # 320 # Example, 321 # ocsp.enable=true 322 323 # 324 # Location of the OCSP responder 325 # 326 # By default, the location of the OCSP responder is determined implicitly 327 # from the certificate being validated. This property explicitly specifies 328 # the location of the OCSP responder. The property is used when the 329 # Authority Information Access extension (defined in RFC 3280) is absent 330 # from the certificate or when it requires overriding. 331 # 332 # Example, 333 # ocsp.responderURL=http://ocsp.example.net:80 334 335 # 336 # Subject name of the OCSP responder's certificate 337 # 338 # By default, the certificate of the OCSP responder is that of the issuer 339 # of the certificate being validated. This property identifies the certificate 340 # of the OCSP responder when the default does not apply. Its value is a string 341 # distinguished name (defined in RFC 2253) which identifies a certificate in 342 # the set of certificates supplied during cert path validation. In cases where 343 # the subject name alone is not sufficient to uniquely identify the certificate 344 # then both the "ocsp.responderCertIssuerName" and 345 # "ocsp.responderCertSerialNumber" properties must be used instead. When this 346 # property is set then those two properties are ignored. 347 # 348 # Example, 349 # ocsp.responderCertSubjectName="CN=OCSP Responder, O=XYZ Corp" 350 351 # 352 # Issuer name of the OCSP responder's certificate 353 # 354 # By default, the certificate of the OCSP responder is that of the issuer 355 # of the certificate being validated. This property identifies the certificate 356 # of the OCSP responder when the default does not apply. Its value is a string 357 # distinguished name (defined in RFC 2253) which identifies a certificate in 358 # the set of certificates supplied during cert path validation. When this 359 # property is set then the "ocsp.responderCertSerialNumber" property must also 360 # be set. When the "ocsp.responderCertSubjectName" property is set then this 361 # property is ignored. 362 # 363 # Example, 364 # ocsp.responderCertIssuerName="CN=Enterprise CA, O=XYZ Corp" 365 366 # 367 # Serial number of the OCSP responder's certificate 368 # 369 # By default, the certificate of the OCSP responder is that of the issuer 370 # of the certificate being validated. This property identifies the certificate 371 # of the OCSP responder when the default does not apply. Its value is a string 372 # of hexadecimal digits (colon or space separators may be present) which 373 # identifies a certificate in the set of certificates supplied during cert path 374 # validation. When this property is set then the "ocsp.responderCertIssuerName" 375 # property must also be set. When the "ocsp.responderCertSubjectName" property 376 # is set then this property is ignored. 377 # 378 # Example, 379 # ocsp.responderCertSerialNumber=2A:FF:00 380 381 # 382 # Policy for failed Kerberos KDC lookups: 383 # 384 # When a KDC is unavailable (network error, service failure, etc), it is 385 # put inside a blacklist and accessed less often for future requests. The 386 # value (case-insensitive) for this policy can be: 387 # 388 # tryLast 389 # KDCs in the blacklist are always tried after those not on the list. 390 # 391 # tryLess[:max_retries,timeout] 392 # KDCs in the blacklist are still tried by their order in the configuration, 393 # but with smaller max_retries and timeout values. max_retries and timeout 394 # are optional numerical parameters (default 1 and 5000, which means once 395 # and 5 seconds). Please notes that if any of the values defined here is 396 # more than what is defined in krb5.conf, it will be ignored. 397 # 398 # Whenever a KDC is detected as available, it is removed from the blacklist. 399 # The blacklist is reset when krb5.conf is reloaded. You can add 400 # refreshKrb5Config=true to a JAAS configuration file so that krb5.conf is 401 # reloaded whenever a JAAS authentication is attempted. 402 # 403 # Example, 404 # krb5.kdc.bad.policy = tryLast 405 # krb5.kdc.bad.policy = tryLess:2,2000 406 krb5.kdc.bad.policy = tryLast 407 408 # Algorithm restrictions for certification path (CertPath) processing 409 # 410 # In some environments, certain algorithms or key lengths may be undesirable 411 # for certification path building and validation. For example, "MD2" is 412 # generally no longer considered to be a secure hash algorithm. This section 413 # describes the mechanism for disabling algorithms based on algorithm name 414 # and/or key length. This includes algorithms used in certificates, as well 415 # as revocation information such as CRLs and signed OCSP Responses. 416 # 417 # The syntax of the disabled algorithm string is described as this Java 418 # BNF-style: 419 # DisabledAlgorithms: 420 # " DisabledAlgorithm { , DisabledAlgorithm } " 421 # 422 # DisabledAlgorithm: 423 # AlgorithmName [Constraint] 424 # 425 # AlgorithmName: 426 # (see below) 427 # 428 # Constraint: 429 # KeySizeConstraint 430 # 431 # KeySizeConstraint: 432 # keySize Operator DecimalInteger 433 # 434 # Operator: 435 # <= | < | == | != | >= | > 436 # 437 # DecimalInteger: 438 # DecimalDigits 439 # 440 # DecimalDigits: 441 # DecimalDigit {DecimalDigit} 442 # 443 # DecimalDigit: one of 444 # 1 2 3 4 5 6 7 8 9 0 445 # 446 # The "AlgorithmName" is the standard algorithm name of the disabled 447 # algorithm. See "Java Cryptography Architecture Standard Algorithm Name 448 # Documentation" for information about Standard Algorithm Names. Matching 449 # is performed using a case-insensitive sub-element matching rule. (For 450 # example, in "SHA1withECDSA" the sub-elements are "SHA1" for hashing and 451 # "ECDSA" for signatures.) If the assertion "AlgorithmName" is a 452 # sub-element of the certificate algorithm name, the algorithm will be 453 # rejected during certification path building and validation. For example, 454 # the assertion algorithm name "DSA" will disable all certificate algorithms 455 # that rely on DSA, such as NONEwithDSA, SHA1withDSA. However, the assertion 456 # will not disable algorithms related to "ECDSA". 457 # 458 # A "Constraint" provides further guidance for the algorithm being specified. 459 # The "KeySizeConstraint" requires a key of a valid size range if the 460 # "AlgorithmName" is of a key algorithm. The "DecimalInteger" indicates the 461 # key size specified in number of bits. For example, "RSA keySize <= 1024" 462 # indicates that any RSA key with key size less than or equal to 1024 bits 463 # should be disabled, and "RSA keySize < 1024, RSA keySize > 2048" indicates 464 # that any RSA key with key size less than 1024 or greater than 2048 should 465 # be disabled. Note that the "KeySizeConstraint" only makes sense to key 466 # algorithms. 467 # 468 # Note: This property is currently used by Oracle's PKIX implementation. It 469 # is not guaranteed to be examined and used by other implementations. 470 # 471 # Example: 472 # jdk.certpath.disabledAlgorithms=MD2, DSA, RSA keySize < 2048 473 # 474 # 475 jdk.certpath.disabledAlgorithms=MD2, MD5, RSA keySize < 1024 476 477 # Algorithm restrictions for Secure Socket Layer/Transport Layer Security 478 # (SSL/TLS) processing 479 # 480 # In some environments, certain algorithms or key lengths may be undesirable 481 # when using SSL/TLS. This section describes the mechanism for disabling 482 # algorithms during SSL/TLS security parameters negotiation, including cipher 483 # suites selection, peer authentication and key exchange mechanisms. 484 # 485 # For PKI-based peer authentication and key exchange mechanisms, this list 486 # of disabled algorithms will also be checked during certification path 487 # building and validation, including algorithms used in certificates, as 488 # well as revocation information such as CRLs and signed OCSP Responses. 489 # This is in addition to the jdk.certpath.disabledAlgorithms property above. 490 # 491 # See the specification of "jdk.certpath.disabledAlgorithms" for the 492 # syntax of the disabled algorithm string. 493 # 494 # Note: This property is currently used by Oracle's JSSE implementation. 495 # It is not guaranteed to be examined and used by other implementations. 496 # 497 # Example: 498 # jdk.tls.disabledAlgorithms=MD5, SHA1, DSA, RSA keySize < 2048