--- /dev/null 2021-01-19 17:38:25.908523431 +0000 +++ new/src/cpu/aarch64/vm/interp_masm_aarch64.cpp 2021-01-25 19:31:44.348556479 +0000 @@ -0,0 +1,1730 @@ +/* + * Copyright (c) 2013, Red Hat Inc. + * Copyright (c) 2003, 2011, Oracle and/or its affiliates. + * All rights reserved. + * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. + * + * This code is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 only, as + * published by the Free Software Foundation. + * + * This code is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * version 2 for more details (a copy is included in the LICENSE file that + * accompanied this code). + * + * You should have received a copy of the GNU General Public License version + * 2 along with this work; if not, write to the Free Software Foundation, + * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. + * + * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA + * or visit www.oracle.com if you need additional information or have any + * questions. + * + */ + +#include "precompiled.hpp" +#include "interp_masm_aarch64.hpp" +#include "interpreter/interpreter.hpp" +#include "interpreter/interpreterRuntime.hpp" +#include "oops/arrayOop.hpp" +#include "oops/markOop.hpp" +#include "oops/methodData.hpp" +#include "oops/method.hpp" +#include "prims/jvmtiExport.hpp" +#include "prims/jvmtiRedefineClassesTrace.hpp" +#include "prims/jvmtiThreadState.hpp" +#include "runtime/basicLock.hpp" +#include "runtime/biasedLocking.hpp" +#include "runtime/sharedRuntime.hpp" +#include "runtime/thread.inline.hpp" + + +void InterpreterMacroAssembler::narrow(Register result) { + + // Get method->_constMethod->_result_type + ldr(rscratch1, Address(rfp, frame::interpreter_frame_method_offset * wordSize)); + ldr(rscratch1, Address(rscratch1, Method::const_offset())); + ldrb(rscratch1, Address(rscratch1, ConstMethod::result_type_offset())); + + Label done, notBool, notByte, notChar; + + // common case first + cmpw(rscratch1, T_INT); + br(Assembler::EQ, done); + + // mask integer result to narrower return type. + cmpw(rscratch1, T_BOOLEAN); + br(Assembler::NE, notBool); + andw(result, result, 0x1); + b(done); + + bind(notBool); + cmpw(rscratch1, T_BYTE); + br(Assembler::NE, notByte); + sbfx(result, result, 0, 8); + b(done); + + bind(notByte); + cmpw(rscratch1, T_CHAR); + br(Assembler::NE, notChar); + ubfx(result, result, 0, 16); // truncate upper 16 bits + b(done); + + bind(notChar); + sbfx(result, result, 0, 16); // sign-extend short + + // Nothing to do for T_INT + bind(done); +} + +#ifndef CC_INTERP + +void InterpreterMacroAssembler::check_and_handle_popframe(Register java_thread) { + if (JvmtiExport::can_pop_frame()) { + Label L; + // Initiate popframe handling only if it is not already being + // processed. If the flag has the popframe_processing bit set, it + // means that this code is called *during* popframe handling - we + // don't want to reenter. + // This method is only called just after the call into the vm in + // call_VM_base, so the arg registers are available. + ldrw(rscratch1, Address(rthread, JavaThread::popframe_condition_offset())); + tstw(rscratch1, JavaThread::popframe_pending_bit); + br(Assembler::EQ, L); + tstw(rscratch1, JavaThread::popframe_processing_bit); + br(Assembler::NE, L); + // Call Interpreter::remove_activation_preserving_args_entry() to get the + // address of the same-named entrypoint in the generated interpreter code. + call_VM_leaf(CAST_FROM_FN_PTR(address, Interpreter::remove_activation_preserving_args_entry)); + br(r0); + bind(L); + } +} + + +void InterpreterMacroAssembler::load_earlyret_value(TosState state) { + ldr(r2, Address(rthread, JavaThread::jvmti_thread_state_offset())); + const Address tos_addr(r2, JvmtiThreadState::earlyret_tos_offset()); + const Address oop_addr(r2, JvmtiThreadState::earlyret_oop_offset()); + const Address val_addr(r2, JvmtiThreadState::earlyret_value_offset()); + switch (state) { + case atos: ldr(r0, oop_addr); + str(zr, oop_addr); + verify_oop(r0, state); break; + case ltos: ldr(r0, val_addr); break; + case btos: // fall through + case ztos: // fall through + case ctos: // fall through + case stos: // fall through + case itos: ldrw(r0, val_addr); break; + case ftos: ldrs(v0, val_addr); break; + case dtos: ldrd(v0, val_addr); break; + case vtos: /* nothing to do */ break; + default : ShouldNotReachHere(); + } + // Clean up tos value in the thread object + movw(rscratch1, (int) ilgl); + strw(rscratch1, tos_addr); + strw(zr, val_addr); +} + + +void InterpreterMacroAssembler::check_and_handle_earlyret(Register java_thread) { + if (JvmtiExport::can_force_early_return()) { + Label L; + ldr(rscratch1, Address(rthread, JavaThread::jvmti_thread_state_offset())); + cbz(rscratch1, L); // if (thread->jvmti_thread_state() == NULL) exit; + + // Initiate earlyret handling only if it is not already being processed. + // If the flag has the earlyret_processing bit set, it means that this code + // is called *during* earlyret handling - we don't want to reenter. + ldrw(rscratch1, Address(rscratch1, JvmtiThreadState::earlyret_state_offset())); + cmpw(rscratch1, JvmtiThreadState::earlyret_pending); + br(Assembler::NE, L); + + // Call Interpreter::remove_activation_early_entry() to get the address of the + // same-named entrypoint in the generated interpreter code. + ldr(rscratch1, Address(rthread, JavaThread::jvmti_thread_state_offset())); + ldrw(rscratch1, Address(rscratch1, JvmtiThreadState::earlyret_tos_offset())); + call_VM_leaf(CAST_FROM_FN_PTR(address, Interpreter::remove_activation_early_entry), rscratch1); + br(r0); + bind(L); + } +} + +void InterpreterMacroAssembler::get_unsigned_2_byte_index_at_bcp( + Register reg, + int bcp_offset) { + assert(bcp_offset >= 0, "bcp is still pointing to start of bytecode"); + ldrh(reg, Address(rbcp, bcp_offset)); + rev16(reg, reg); +} + +void InterpreterMacroAssembler::get_dispatch() { + unsigned long offset; + adrp(rdispatch, ExternalAddress((address)Interpreter::dispatch_table()), offset); + lea(rdispatch, Address(rdispatch, offset)); +} + +void InterpreterMacroAssembler::get_cache_index_at_bcp(Register index, + int bcp_offset, + size_t index_size) { + assert(bcp_offset > 0, "bcp is still pointing to start of bytecode"); + if (index_size == sizeof(u2)) { + load_unsigned_short(index, Address(rbcp, bcp_offset)); + } else if (index_size == sizeof(u4)) { + assert(EnableInvokeDynamic, "giant index used only for JSR 292"); + ldrw(index, Address(rbcp, bcp_offset)); + // Check if the secondary index definition is still ~x, otherwise + // we have to change the following assembler code to calculate the + // plain index. + assert(ConstantPool::decode_invokedynamic_index(~123) == 123, "else change next line"); + eonw(index, index, zr); // convert to plain index + } else if (index_size == sizeof(u1)) { + load_unsigned_byte(index, Address(rbcp, bcp_offset)); + } else { + ShouldNotReachHere(); + } +} + +// Return +// Rindex: index into constant pool +// Rcache: address of cache entry - ConstantPoolCache::base_offset() +// +// A caller must add ConstantPoolCache::base_offset() to Rcache to get +// the true address of the cache entry. +// +void InterpreterMacroAssembler::get_cache_and_index_at_bcp(Register cache, + Register index, + int bcp_offset, + size_t index_size) { + assert_different_registers(cache, index); + assert_different_registers(cache, rcpool); + get_cache_index_at_bcp(index, bcp_offset, index_size); + assert(sizeof(ConstantPoolCacheEntry) == 4 * wordSize, "adjust code below"); + // convert from field index to ConstantPoolCacheEntry + // aarch64 already has the cache in rcpool so there is no need to + // install it in cache. instead we pre-add the indexed offset to + // rcpool and return it in cache. All clients of this method need to + // be modified accordingly. + add(cache, rcpool, index, Assembler::LSL, 5); +} + + +void InterpreterMacroAssembler::get_cache_and_index_and_bytecode_at_bcp(Register cache, + Register index, + Register bytecode, + int byte_no, + int bcp_offset, + size_t index_size) { + get_cache_and_index_at_bcp(cache, index, bcp_offset, index_size); + // We use a 32-bit load here since the layout of 64-bit words on + // little-endian machines allow us that. + // n.b. unlike x86 cache already includes the index offset + lea(bytecode, Address(cache, + ConstantPoolCache::base_offset() + + ConstantPoolCacheEntry::indices_offset())); + ldarw(bytecode, bytecode); + const int shift_count = (1 + byte_no) * BitsPerByte; + ubfx(bytecode, bytecode, shift_count, BitsPerByte); +} + +void InterpreterMacroAssembler::get_cache_entry_pointer_at_bcp(Register cache, + Register tmp, + int bcp_offset, + size_t index_size) { + assert(cache != tmp, "must use different register"); + get_cache_index_at_bcp(tmp, bcp_offset, index_size); + assert(sizeof(ConstantPoolCacheEntry) == 4 * wordSize, "adjust code below"); + // convert from field index to ConstantPoolCacheEntry index + // and from word offset to byte offset + assert(exact_log2(in_bytes(ConstantPoolCacheEntry::size_in_bytes())) == 2 + LogBytesPerWord, "else change next line"); + ldr(cache, Address(rfp, frame::interpreter_frame_cache_offset * wordSize)); + // skip past the header + add(cache, cache, in_bytes(ConstantPoolCache::base_offset())); + add(cache, cache, tmp, Assembler::LSL, 2 + LogBytesPerWord); // construct pointer to cache entry +} + +void InterpreterMacroAssembler::get_method_counters(Register method, + Register mcs, Label& skip) { + Label has_counters; + ldr(mcs, Address(method, Method::method_counters_offset())); + cbnz(mcs, has_counters); + call_VM(noreg, CAST_FROM_FN_PTR(address, + InterpreterRuntime::build_method_counters), method); + ldr(mcs, Address(method, Method::method_counters_offset())); + cbz(mcs, skip); // No MethodCounters allocated, OutOfMemory + bind(has_counters); +} + +// Load object from cpool->resolved_references(index) +void InterpreterMacroAssembler::load_resolved_reference_at_index( + Register result, Register index) { + assert_different_registers(result, index); + // convert from field index to resolved_references() index and from + // word index to byte offset. Since this is a java object, it can be compressed + Register tmp = index; // reuse + lslw(tmp, tmp, LogBytesPerHeapOop); + + get_constant_pool(result); + // load pointer for resolved_references[] objArray + ldr(result, Address(result, ConstantPool::resolved_references_offset_in_bytes())); + // JNIHandles::resolve(obj); + ldr(result, Address(result, 0)); + // Add in the index + add(result, result, tmp); + load_heap_oop(result, Address(result, arrayOopDesc::base_offset_in_bytes(T_OBJECT))); +} + +// Generate a subtype check: branch to ok_is_subtype if sub_klass is a +// subtype of super_klass. +// +// Args: +// r0: superklass +// Rsub_klass: subklass +// +// Kills: +// r2, r5 +void InterpreterMacroAssembler::gen_subtype_check(Register Rsub_klass, + Label& ok_is_subtype) { + assert(Rsub_klass != r0, "r0 holds superklass"); + assert(Rsub_klass != r2, "r2 holds 2ndary super array length"); + assert(Rsub_klass != r5, "r5 holds 2ndary super array scan ptr"); + + // Profile the not-null value's klass. + profile_typecheck(r2, Rsub_klass, r5); // blows r2, reloads r5 + + // Do the check. + check_klass_subtype(Rsub_klass, r0, r2, ok_is_subtype); // blows r2 + + // Profile the failure of the check. + profile_typecheck_failed(r2); // blows r2 +} + +// Java Expression Stack + +void InterpreterMacroAssembler::pop_ptr(Register r) { + ldr(r, post(esp, wordSize)); +} + +void InterpreterMacroAssembler::pop_i(Register r) { + ldrw(r, post(esp, wordSize)); +} + +void InterpreterMacroAssembler::pop_l(Register r) { + ldr(r, post(esp, 2 * Interpreter::stackElementSize)); +} + +void InterpreterMacroAssembler::push_ptr(Register r) { + str(r, pre(esp, -wordSize)); + } + +void InterpreterMacroAssembler::push_i(Register r) { + str(r, pre(esp, -wordSize)); +} + +void InterpreterMacroAssembler::push_l(Register r) { + str(r, pre(esp, 2 * -wordSize)); +} + +void InterpreterMacroAssembler::pop_f(FloatRegister r) { + ldrs(r, post(esp, wordSize)); +} + +void InterpreterMacroAssembler::pop_d(FloatRegister r) { + ldrd(r, post(esp, 2 * Interpreter::stackElementSize)); +} + +void InterpreterMacroAssembler::push_f(FloatRegister r) { + strs(r, pre(esp, -wordSize)); +} + +void InterpreterMacroAssembler::push_d(FloatRegister r) { + strd(r, pre(esp, 2* -wordSize)); +} + +void InterpreterMacroAssembler::pop(TosState state) { + switch (state) { + case atos: pop_ptr(); break; + case btos: + case ztos: + case ctos: + case stos: + case itos: pop_i(); break; + case ltos: pop_l(); break; + case ftos: pop_f(); break; + case dtos: pop_d(); break; + case vtos: /* nothing to do */ break; + default: ShouldNotReachHere(); + } + verify_oop(r0, state); +} + +void InterpreterMacroAssembler::push(TosState state) { + verify_oop(r0, state); + switch (state) { + case atos: push_ptr(); break; + case btos: + case ztos: + case ctos: + case stos: + case itos: push_i(); break; + case ltos: push_l(); break; + case ftos: push_f(); break; + case dtos: push_d(); break; + case vtos: /* nothing to do */ break; + default : ShouldNotReachHere(); + } +} + +// Helpers for swap and dup +void InterpreterMacroAssembler::load_ptr(int n, Register val) { + ldr(val, Address(esp, Interpreter::expr_offset_in_bytes(n))); +} + +void InterpreterMacroAssembler::store_ptr(int n, Register val) { + str(val, Address(esp, Interpreter::expr_offset_in_bytes(n))); +} + + +void InterpreterMacroAssembler::prepare_to_jump_from_interpreted() { + // set sender sp + mov(r13, sp); + // record last_sp + str(esp, Address(rfp, frame::interpreter_frame_last_sp_offset * wordSize)); +} + +// Jump to from_interpreted entry of a call unless single stepping is possible +// in this thread in which case we must call the i2i entry +void InterpreterMacroAssembler::jump_from_interpreted(Register method, Register temp) { + prepare_to_jump_from_interpreted(); + + if (JvmtiExport::can_post_interpreter_events()) { + Label run_compiled_code; + // JVMTI events, such as single-stepping, are implemented partly by avoiding running + // compiled code in threads for which the event is enabled. Check here for + // interp_only_mode if these events CAN be enabled. + // interp_only is an int, on little endian it is sufficient to test the byte only + // Is a cmpl faster? + ldr(rscratch1, Address(rthread, JavaThread::interp_only_mode_offset())); + cbz(rscratch1, run_compiled_code); + ldr(rscratch1, Address(method, Method::interpreter_entry_offset())); + br(rscratch1); + bind(run_compiled_code); + } + + ldr(rscratch1, Address(method, Method::from_interpreted_offset())); + br(rscratch1); +} + +// The following two routines provide a hook so that an implementation +// can schedule the dispatch in two parts. amd64 does not do this. +void InterpreterMacroAssembler::dispatch_prolog(TosState state, int step) { +} + +void InterpreterMacroAssembler::dispatch_epilog(TosState state, int step) { + dispatch_next(state, step); +} + +void InterpreterMacroAssembler::dispatch_base(TosState state, + address* table, + bool verifyoop) { + if (VerifyActivationFrameSize) { + Unimplemented(); + } + if (verifyoop) { + verify_oop(r0, state); + } + if (table == Interpreter::dispatch_table(state)) { + addw(rscratch2, rscratch1, Interpreter::distance_from_dispatch_table(state)); + ldr(rscratch2, Address(rdispatch, rscratch2, Address::uxtw(3))); + } else { + mov(rscratch2, (address)table); + ldr(rscratch2, Address(rscratch2, rscratch1, Address::uxtw(3))); + } + br(rscratch2); +} + +void InterpreterMacroAssembler::dispatch_only(TosState state) { + dispatch_base(state, Interpreter::dispatch_table(state)); +} + +void InterpreterMacroAssembler::dispatch_only_normal(TosState state) { + dispatch_base(state, Interpreter::normal_table(state)); +} + +void InterpreterMacroAssembler::dispatch_only_noverify(TosState state) { + dispatch_base(state, Interpreter::normal_table(state), false); +} + + +void InterpreterMacroAssembler::dispatch_next(TosState state, int step) { + // load next bytecode + ldrb(rscratch1, Address(pre(rbcp, step))); + dispatch_base(state, Interpreter::dispatch_table(state)); +} + +void InterpreterMacroAssembler::dispatch_via(TosState state, address* table) { + // load current bytecode + ldrb(rscratch1, Address(rbcp, 0)); + dispatch_base(state, table); +} + +// remove activation +// +// Unlock the receiver if this is a synchronized method. +// Unlock any Java monitors from syncronized blocks. +// Remove the activation from the stack. +// +// If there are locked Java monitors +// If throw_monitor_exception +// throws IllegalMonitorStateException +// Else if install_monitor_exception +// installs IllegalMonitorStateException +// Else +// no error processing +void InterpreterMacroAssembler::remove_activation( + TosState state, + bool throw_monitor_exception, + bool install_monitor_exception, + bool notify_jvmdi) { + // Note: Registers r3 xmm0 may be in use for the + // result check if synchronized method + Label unlocked, unlock, no_unlock; + + // get the value of _do_not_unlock_if_synchronized into r3 + const Address do_not_unlock_if_synchronized(rthread, + in_bytes(JavaThread::do_not_unlock_if_synchronized_offset())); + ldrb(r3, do_not_unlock_if_synchronized); + strb(zr, do_not_unlock_if_synchronized); // reset the flag + + // get method access flags + ldr(r1, Address(rfp, frame::interpreter_frame_method_offset * wordSize)); + ldr(r2, Address(r1, Method::access_flags_offset())); + tst(r2, JVM_ACC_SYNCHRONIZED); + br(Assembler::EQ, unlocked); + + // Don't unlock anything if the _do_not_unlock_if_synchronized flag + // is set. + cbnz(r3, no_unlock); + + // unlock monitor + push(state); // save result + + // BasicObjectLock will be first in list, since this is a + // synchronized method. However, need to check that the object has + // not been unlocked by an explicit monitorexit bytecode. + const Address monitor(rfp, frame::interpreter_frame_initial_sp_offset * + wordSize - (int) sizeof(BasicObjectLock)); + // We use c_rarg1 so that if we go slow path it will be the correct + // register for unlock_object to pass to VM directly + lea(c_rarg1, monitor); // address of first monitor + + ldr(r0, Address(c_rarg1, BasicObjectLock::obj_offset_in_bytes())); + cbnz(r0, unlock); + + pop(state); + if (throw_monitor_exception) { + // Entry already unlocked, need to throw exception + call_VM(noreg, CAST_FROM_FN_PTR(address, + InterpreterRuntime::throw_illegal_monitor_state_exception)); + should_not_reach_here(); + } else { + // Monitor already unlocked during a stack unroll. If requested, + // install an illegal_monitor_state_exception. Continue with + // stack unrolling. + if (install_monitor_exception) { + call_VM(noreg, CAST_FROM_FN_PTR(address, + InterpreterRuntime::new_illegal_monitor_state_exception)); + } + b(unlocked); + } + + bind(unlock); + unlock_object(c_rarg1); + pop(state); + + // Check that for block-structured locking (i.e., that all locked + // objects has been unlocked) + bind(unlocked); + + // r0: Might contain return value + + // Check that all monitors are unlocked + { + Label loop, exception, entry, restart; + const int entry_size = frame::interpreter_frame_monitor_size() * wordSize; + const Address monitor_block_top( + rfp, frame::interpreter_frame_monitor_block_top_offset * wordSize); + const Address monitor_block_bot( + rfp, frame::interpreter_frame_initial_sp_offset * wordSize); + + bind(restart); + // We use c_rarg1 so that if we go slow path it will be the correct + // register for unlock_object to pass to VM directly + ldr(c_rarg1, monitor_block_top); // points to current entry, starting + // with top-most entry + lea(r19, monitor_block_bot); // points to word before bottom of + // monitor block + b(entry); + + // Entry already locked, need to throw exception + bind(exception); + + if (throw_monitor_exception) { + // Throw exception + MacroAssembler::call_VM(noreg, + CAST_FROM_FN_PTR(address, InterpreterRuntime:: + throw_illegal_monitor_state_exception)); + should_not_reach_here(); + } else { + // Stack unrolling. Unlock object and install illegal_monitor_exception. + // Unlock does not block, so don't have to worry about the frame. + // We don't have to preserve c_rarg1 since we are going to throw an exception. + + push(state); + unlock_object(c_rarg1); + pop(state); + + if (install_monitor_exception) { + call_VM(noreg, CAST_FROM_FN_PTR(address, + InterpreterRuntime:: + new_illegal_monitor_state_exception)); + } + + b(restart); + } + + bind(loop); + // check if current entry is used + ldr(rscratch1, Address(c_rarg1, BasicObjectLock::obj_offset_in_bytes())); + cbnz(rscratch1, exception); + + add(c_rarg1, c_rarg1, entry_size); // otherwise advance to next entry + bind(entry); + cmp(c_rarg1, r19); // check if bottom reached + br(Assembler::NE, loop); // if not at bottom then check this entry + } + + bind(no_unlock); + + // jvmti support + if (notify_jvmdi) { + notify_method_exit(state, NotifyJVMTI); // preserve TOSCA + } else { + notify_method_exit(state, SkipNotifyJVMTI); // preserve TOSCA + } + + // remove activation + // get sender esp + ldr(esp, + Address(rfp, frame::interpreter_frame_sender_sp_offset * wordSize)); + // remove frame anchor + leave(); + // If we're returning to interpreted code we will shortly be + // adjusting SP to allow some space for ESP. If we're returning to + // compiled code the saved sender SP was saved in sender_sp, so this + // restores it. + andr(sp, esp, -16); +} + +#endif // C_INTERP + +// Lock object +// +// Args: +// c_rarg1: BasicObjectLock to be used for locking +// +// Kills: +// r0 +// c_rarg0, c_rarg1, c_rarg2, c_rarg3, .. (param regs) +// rscratch1, rscratch2 (scratch regs) +void InterpreterMacroAssembler::lock_object(Register lock_reg) +{ + assert(lock_reg == c_rarg1, "The argument is only for looks. It must be c_rarg1"); + if (UseHeavyMonitors) { + call_VM(noreg, + CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorenter), + lock_reg); + } else { + Label done; + + const Register swap_reg = r0; + const Register tmp = c_rarg2; + const Register obj_reg = c_rarg3; // Will contain the oop + + const int obj_offset = BasicObjectLock::obj_offset_in_bytes(); + const int lock_offset = BasicObjectLock::lock_offset_in_bytes (); + const int mark_offset = lock_offset + + BasicLock::displaced_header_offset_in_bytes(); + + Label slow_case; + + // Load object pointer into obj_reg %c_rarg3 + ldr(obj_reg, Address(lock_reg, obj_offset)); + + if (UseBiasedLocking) { + biased_locking_enter(lock_reg, obj_reg, swap_reg, tmp, false, done, &slow_case); + } + + // Load (object->mark() | 1) into swap_reg + ldr(rscratch1, Address(obj_reg, 0)); + orr(swap_reg, rscratch1, 1); + + // Save (object->mark() | 1) into BasicLock's displaced header + str(swap_reg, Address(lock_reg, mark_offset)); + + assert(lock_offset == 0, + "displached header must be first word in BasicObjectLock"); + + Label fail; + if (PrintBiasedLockingStatistics) { + Label fast; + cmpxchgptr(swap_reg, lock_reg, obj_reg, rscratch1, fast, &fail); + bind(fast); + atomic_incw(Address((address)BiasedLocking::fast_path_entry_count_addr()), + rscratch2, rscratch1, tmp); + b(done); + bind(fail); + } else { + cmpxchgptr(swap_reg, lock_reg, obj_reg, rscratch1, done, /*fallthrough*/NULL); + } + + // Test if the oopMark is an obvious stack pointer, i.e., + // 1) (mark & 7) == 0, and + // 2) rsp <= mark < mark + os::pagesize() + // + // These 3 tests can be done by evaluating the following + // expression: ((mark - rsp) & (7 - os::vm_page_size())), + // assuming both stack pointer and pagesize have their + // least significant 3 bits clear. + // NOTE: the oopMark is in swap_reg %r0 as the result of cmpxchg + // NOTE2: aarch64 does not like to subtract sp from rn so take a + // copy + mov(rscratch1, sp); + sub(swap_reg, swap_reg, rscratch1); + ands(swap_reg, swap_reg, (unsigned long)(7 - os::vm_page_size())); + + // Save the test result, for recursive case, the result is zero + str(swap_reg, Address(lock_reg, mark_offset)); + + if (PrintBiasedLockingStatistics) { + br(Assembler::NE, slow_case); + atomic_incw(Address((address)BiasedLocking::fast_path_entry_count_addr()), + rscratch2, rscratch1, tmp); + } + br(Assembler::EQ, done); + + bind(slow_case); + + // Call the runtime routine for slow case + call_VM(noreg, + CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorenter), + lock_reg); + + bind(done); + } +} + + +// Unlocks an object. Used in monitorexit bytecode and +// remove_activation. Throws an IllegalMonitorException if object is +// not locked by current thread. +// +// Args: +// c_rarg1: BasicObjectLock for lock +// +// Kills: +// r0 +// c_rarg0, c_rarg1, c_rarg2, c_rarg3, ... (param regs) +// rscratch1, rscratch2 (scratch regs) +void InterpreterMacroAssembler::unlock_object(Register lock_reg) +{ + assert(lock_reg == c_rarg1, "The argument is only for looks. It must be rarg1"); + + if (UseHeavyMonitors) { + call_VM(noreg, + CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorexit), + lock_reg); + } else { + Label done; + + const Register swap_reg = r0; + const Register header_reg = c_rarg2; // Will contain the old oopMark + const Register obj_reg = c_rarg3; // Will contain the oop + + save_bcp(); // Save in case of exception + + // Convert from BasicObjectLock structure to object and BasicLock + // structure Store the BasicLock address into %r0 + lea(swap_reg, Address(lock_reg, BasicObjectLock::lock_offset_in_bytes())); + + // Load oop into obj_reg(%c_rarg3) + ldr(obj_reg, Address(lock_reg, BasicObjectLock::obj_offset_in_bytes())); + + // Free entry + str(zr, Address(lock_reg, BasicObjectLock::obj_offset_in_bytes())); + + if (UseBiasedLocking) { + biased_locking_exit(obj_reg, header_reg, done); + } + + // Load the old header from BasicLock structure + ldr(header_reg, Address(swap_reg, + BasicLock::displaced_header_offset_in_bytes())); + + // Test for recursion + cbz(header_reg, done); + + // Atomic swap back the old header + cmpxchgptr(swap_reg, header_reg, obj_reg, rscratch1, done, /*fallthrough*/NULL); + + // Call the runtime routine for slow case. + str(obj_reg, Address(lock_reg, BasicObjectLock::obj_offset_in_bytes())); // restore obj + call_VM(noreg, + CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorexit), + lock_reg); + + bind(done); + + restore_bcp(); + } +} + +#ifndef CC_INTERP + +void InterpreterMacroAssembler::test_method_data_pointer(Register mdp, + Label& zero_continue) { + assert(ProfileInterpreter, "must be profiling interpreter"); + ldr(mdp, Address(rfp, frame::interpreter_frame_mdx_offset * wordSize)); + cbz(mdp, zero_continue); +} + +// Set the method data pointer for the current bcp. +void InterpreterMacroAssembler::set_method_data_pointer_for_bcp() { + assert(ProfileInterpreter, "must be profiling interpreter"); + Label set_mdp; + stp(r0, r1, Address(pre(sp, -2 * wordSize))); + + // Test MDO to avoid the call if it is NULL. + ldr(r0, Address(rmethod, in_bytes(Method::method_data_offset()))); + cbz(r0, set_mdp); + call_VM_leaf(CAST_FROM_FN_PTR(address, InterpreterRuntime::bcp_to_di), rmethod, rbcp); + // r0: mdi + // mdo is guaranteed to be non-zero here, we checked for it before the call. + ldr(r1, Address(rmethod, in_bytes(Method::method_data_offset()))); + lea(r1, Address(r1, in_bytes(MethodData::data_offset()))); + add(r0, r1, r0); + str(r0, Address(rfp, frame::interpreter_frame_mdx_offset * wordSize)); + bind(set_mdp); + ldp(r0, r1, Address(post(sp, 2 * wordSize))); +} + +void InterpreterMacroAssembler::verify_method_data_pointer() { + assert(ProfileInterpreter, "must be profiling interpreter"); +#ifdef ASSERT + Label verify_continue; + stp(r0, r1, Address(pre(sp, -2 * wordSize))); + stp(r2, r3, Address(pre(sp, -2 * wordSize))); + test_method_data_pointer(r3, verify_continue); // If mdp is zero, continue + get_method(r1); + + // If the mdp is valid, it will point to a DataLayout header which is + // consistent with the bcp. The converse is highly probable also. + ldrsh(r2, Address(r3, in_bytes(DataLayout::bci_offset()))); + ldr(rscratch1, Address(r1, Method::const_offset())); + add(r2, r2, rscratch1, Assembler::LSL); + lea(r2, Address(r2, ConstMethod::codes_offset())); + cmp(r2, rbcp); + br(Assembler::EQ, verify_continue); + // r1: method + // rbcp: bcp // rbcp == 22 + // r3: mdp + call_VM_leaf(CAST_FROM_FN_PTR(address, InterpreterRuntime::verify_mdp), + r1, rbcp, r3); + bind(verify_continue); + ldp(r2, r3, Address(post(sp, 2 * wordSize))); + ldp(r0, r1, Address(post(sp, 2 * wordSize))); +#endif // ASSERT +} + + +void InterpreterMacroAssembler::set_mdp_data_at(Register mdp_in, + int constant, + Register value) { + assert(ProfileInterpreter, "must be profiling interpreter"); + Address data(mdp_in, constant); + str(value, data); +} + + +void InterpreterMacroAssembler::increment_mdp_data_at(Register mdp_in, + int constant, + bool decrement) { + increment_mdp_data_at(mdp_in, noreg, constant, decrement); +} + +void InterpreterMacroAssembler::increment_mdp_data_at(Register mdp_in, + Register reg, + int constant, + bool decrement) { + assert(ProfileInterpreter, "must be profiling interpreter"); + // %%% this does 64bit counters at best it is wasting space + // at worst it is a rare bug when counters overflow + + assert_different_registers(rscratch2, rscratch1, mdp_in, reg); + + Address addr1(mdp_in, constant); + Address addr2(rscratch2, reg, Address::lsl(0)); + Address &addr = addr1; + if (reg != noreg) { + lea(rscratch2, addr1); + addr = addr2; + } + + if (decrement) { + // Decrement the register. Set condition codes. + // Intel does this + // addptr(data, (int32_t) -DataLayout::counter_increment); + // If the decrement causes the counter to overflow, stay negative + // Label L; + // jcc(Assembler::negative, L); + // addptr(data, (int32_t) DataLayout::counter_increment); + // so we do this + ldr(rscratch1, addr); + subs(rscratch1, rscratch1, (unsigned)DataLayout::counter_increment); + Label L; + br(Assembler::LO, L); // skip store if counter overflow + str(rscratch1, addr); + bind(L); + } else { + assert(DataLayout::counter_increment == 1, + "flow-free idiom only works with 1"); + // Intel does this + // Increment the register. Set carry flag. + // addptr(data, DataLayout::counter_increment); + // If the increment causes the counter to overflow, pull back by 1. + // sbbptr(data, (int32_t)0); + // so we do this + ldr(rscratch1, addr); + adds(rscratch1, rscratch1, DataLayout::counter_increment); + Label L; + br(Assembler::CS, L); // skip store if counter overflow + str(rscratch1, addr); + bind(L); + } +} + +void InterpreterMacroAssembler::set_mdp_flag_at(Register mdp_in, + int flag_byte_constant) { + assert(ProfileInterpreter, "must be profiling interpreter"); + int header_offset = in_bytes(DataLayout::header_offset()); + int header_bits = DataLayout::flag_mask_to_header_mask(flag_byte_constant); + // Set the flag + ldr(rscratch1, Address(mdp_in, header_offset)); + orr(rscratch1, rscratch1, header_bits); + str(rscratch1, Address(mdp_in, header_offset)); +} + + +void InterpreterMacroAssembler::test_mdp_data_at(Register mdp_in, + int offset, + Register value, + Register test_value_out, + Label& not_equal_continue) { + assert(ProfileInterpreter, "must be profiling interpreter"); + if (test_value_out == noreg) { + ldr(rscratch1, Address(mdp_in, offset)); + cmp(value, rscratch1); + } else { + // Put the test value into a register, so caller can use it: + ldr(test_value_out, Address(mdp_in, offset)); + cmp(value, test_value_out); + } + br(Assembler::NE, not_equal_continue); +} + + +void InterpreterMacroAssembler::update_mdp_by_offset(Register mdp_in, + int offset_of_disp) { + assert(ProfileInterpreter, "must be profiling interpreter"); + ldr(rscratch1, Address(mdp_in, offset_of_disp)); + add(mdp_in, mdp_in, rscratch1, LSL); + str(mdp_in, Address(rfp, frame::interpreter_frame_mdx_offset * wordSize)); +} + + +void InterpreterMacroAssembler::update_mdp_by_offset(Register mdp_in, + Register reg, + int offset_of_disp) { + assert(ProfileInterpreter, "must be profiling interpreter"); + lea(rscratch1, Address(mdp_in, offset_of_disp)); + ldr(rscratch1, Address(rscratch1, reg, Address::lsl(0))); + add(mdp_in, mdp_in, rscratch1, LSL); + str(mdp_in, Address(rfp, frame::interpreter_frame_mdx_offset * wordSize)); +} + + +void InterpreterMacroAssembler::update_mdp_by_constant(Register mdp_in, + int constant) { + assert(ProfileInterpreter, "must be profiling interpreter"); + add(mdp_in, mdp_in, (unsigned)constant); + str(mdp_in, Address(rfp, frame::interpreter_frame_mdx_offset * wordSize)); +} + + +void InterpreterMacroAssembler::update_mdp_for_ret(Register return_bci) { + assert(ProfileInterpreter, "must be profiling interpreter"); + // save/restore across call_VM + stp(zr, return_bci, Address(pre(sp, -2 * wordSize))); + call_VM(noreg, + CAST_FROM_FN_PTR(address, InterpreterRuntime::update_mdp_for_ret), + return_bci); + ldp(zr, return_bci, Address(post(sp, 2 * wordSize))); +} + + +void InterpreterMacroAssembler::profile_taken_branch(Register mdp, + Register bumped_count) { + if (ProfileInterpreter) { + Label profile_continue; + + // If no method data exists, go to profile_continue. + // Otherwise, assign to mdp + test_method_data_pointer(mdp, profile_continue); + + // We are taking a branch. Increment the taken count. + // We inline increment_mdp_data_at to return bumped_count in a register + //increment_mdp_data_at(mdp, in_bytes(JumpData::taken_offset())); + Address data(mdp, in_bytes(JumpData::taken_offset())); + ldr(bumped_count, data); + assert(DataLayout::counter_increment == 1, + "flow-free idiom only works with 1"); + // Intel does this to catch overflow + // addptr(bumped_count, DataLayout::counter_increment); + // sbbptr(bumped_count, 0); + // so we do this + adds(bumped_count, bumped_count, DataLayout::counter_increment); + Label L; + br(Assembler::CS, L); // skip store if counter overflow + str(bumped_count, data); + bind(L); + // The method data pointer needs to be updated to reflect the new target. + update_mdp_by_offset(mdp, in_bytes(JumpData::displacement_offset())); + bind(profile_continue); + } +} + + +void InterpreterMacroAssembler::profile_not_taken_branch(Register mdp) { + if (ProfileInterpreter) { + Label profile_continue; + + // If no method data exists, go to profile_continue. + test_method_data_pointer(mdp, profile_continue); + + // We are taking a branch. Increment the not taken count. + increment_mdp_data_at(mdp, in_bytes(BranchData::not_taken_offset())); + + // The method data pointer needs to be updated to correspond to + // the next bytecode + update_mdp_by_constant(mdp, in_bytes(BranchData::branch_data_size())); + bind(profile_continue); + } +} + + +void InterpreterMacroAssembler::profile_call(Register mdp) { + if (ProfileInterpreter) { + Label profile_continue; + + // If no method data exists, go to profile_continue. + test_method_data_pointer(mdp, profile_continue); + + // We are making a call. Increment the count. + increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset())); + + // The method data pointer needs to be updated to reflect the new target. + update_mdp_by_constant(mdp, in_bytes(CounterData::counter_data_size())); + bind(profile_continue); + } +} + +void InterpreterMacroAssembler::profile_final_call(Register mdp) { + if (ProfileInterpreter) { + Label profile_continue; + + // If no method data exists, go to profile_continue. + test_method_data_pointer(mdp, profile_continue); + + // We are making a call. Increment the count. + increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset())); + + // The method data pointer needs to be updated to reflect the new target. + update_mdp_by_constant(mdp, + in_bytes(VirtualCallData:: + virtual_call_data_size())); + bind(profile_continue); + } +} + + +void InterpreterMacroAssembler::profile_virtual_call(Register receiver, + Register mdp, + Register reg2, + bool receiver_can_be_null) { + if (ProfileInterpreter) { + Label profile_continue; + + // If no method data exists, go to profile_continue. + test_method_data_pointer(mdp, profile_continue); + + Label skip_receiver_profile; + if (receiver_can_be_null) { + Label not_null; + // We are making a call. Increment the count for null receiver. + increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset())); + b(skip_receiver_profile); + bind(not_null); + } + + // Record the receiver type. + record_klass_in_profile(receiver, mdp, reg2, true); + bind(skip_receiver_profile); + + // The method data pointer needs to be updated to reflect the new target. + update_mdp_by_constant(mdp, + in_bytes(VirtualCallData:: + virtual_call_data_size())); + bind(profile_continue); + } +} + +// This routine creates a state machine for updating the multi-row +// type profile at a virtual call site (or other type-sensitive bytecode). +// The machine visits each row (of receiver/count) until the receiver type +// is found, or until it runs out of rows. At the same time, it remembers +// the location of the first empty row. (An empty row records null for its +// receiver, and can be allocated for a newly-observed receiver type.) +// Because there are two degrees of freedom in the state, a simple linear +// search will not work; it must be a decision tree. Hence this helper +// function is recursive, to generate the required tree structured code. +// It's the interpreter, so we are trading off code space for speed. +// See below for example code. +void InterpreterMacroAssembler::record_klass_in_profile_helper( + Register receiver, Register mdp, + Register reg2, int start_row, + Label& done, bool is_virtual_call) { + if (TypeProfileWidth == 0) { + if (is_virtual_call) { + increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset())); + } + return; + } + + int last_row = VirtualCallData::row_limit() - 1; + assert(start_row <= last_row, "must be work left to do"); + // Test this row for both the receiver and for null. + // Take any of three different outcomes: + // 1. found receiver => increment count and goto done + // 2. found null => keep looking for case 1, maybe allocate this cell + // 3. found something else => keep looking for cases 1 and 2 + // Case 3 is handled by a recursive call. + for (int row = start_row; row <= last_row; row++) { + Label next_test; + bool test_for_null_also = (row == start_row); + + // See if the receiver is receiver[n]. + int recvr_offset = in_bytes(VirtualCallData::receiver_offset(row)); + test_mdp_data_at(mdp, recvr_offset, receiver, + (test_for_null_also ? reg2 : noreg), + next_test); + // (Reg2 now contains the receiver from the CallData.) + + // The receiver is receiver[n]. Increment count[n]. + int count_offset = in_bytes(VirtualCallData::receiver_count_offset(row)); + increment_mdp_data_at(mdp, count_offset); + b(done); + bind(next_test); + + if (test_for_null_also) { + Label found_null; + // Failed the equality check on receiver[n]... Test for null. + if (start_row == last_row) { + // The only thing left to do is handle the null case. + if (is_virtual_call) { + cbz(reg2, found_null); + // Receiver did not match any saved receiver and there is no empty row for it. + // Increment total counter to indicate polymorphic case. + increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset())); + b(done); + bind(found_null); + } else { + cbnz(reg2, done); + } + break; + } + // Since null is rare, make it be the branch-taken case. + cbz(reg2, found_null); + + // Put all the "Case 3" tests here. + record_klass_in_profile_helper(receiver, mdp, reg2, start_row + 1, done, is_virtual_call); + + // Found a null. Keep searching for a matching receiver, + // but remember that this is an empty (unused) slot. + bind(found_null); + } + } + + // In the fall-through case, we found no matching receiver, but we + // observed the receiver[start_row] is NULL. + + // Fill in the receiver field and increment the count. + int recvr_offset = in_bytes(VirtualCallData::receiver_offset(start_row)); + set_mdp_data_at(mdp, recvr_offset, receiver); + int count_offset = in_bytes(VirtualCallData::receiver_count_offset(start_row)); + mov(reg2, DataLayout::counter_increment); + set_mdp_data_at(mdp, count_offset, reg2); + if (start_row > 0) { + b(done); + } +} + +// Example state machine code for three profile rows: +// // main copy of decision tree, rooted at row[1] +// if (row[0].rec == rec) { row[0].incr(); goto done; } +// if (row[0].rec != NULL) { +// // inner copy of decision tree, rooted at row[1] +// if (row[1].rec == rec) { row[1].incr(); goto done; } +// if (row[1].rec != NULL) { +// // degenerate decision tree, rooted at row[2] +// if (row[2].rec == rec) { row[2].incr(); goto done; } +// if (row[2].rec != NULL) { count.incr(); goto done; } // overflow +// row[2].init(rec); goto done; +// } else { +// // remember row[1] is empty +// if (row[2].rec == rec) { row[2].incr(); goto done; } +// row[1].init(rec); goto done; +// } +// } else { +// // remember row[0] is empty +// if (row[1].rec == rec) { row[1].incr(); goto done; } +// if (row[2].rec == rec) { row[2].incr(); goto done; } +// row[0].init(rec); goto done; +// } +// done: + +void InterpreterMacroAssembler::record_klass_in_profile(Register receiver, + Register mdp, Register reg2, + bool is_virtual_call) { + assert(ProfileInterpreter, "must be profiling"); + Label done; + + record_klass_in_profile_helper(receiver, mdp, reg2, 0, done, is_virtual_call); + + bind (done); +} + +void InterpreterMacroAssembler::profile_ret(Register return_bci, + Register mdp) { + if (ProfileInterpreter) { + Label profile_continue; + uint row; + + // If no method data exists, go to profile_continue. + test_method_data_pointer(mdp, profile_continue); + + // Update the total ret count. + increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset())); + + for (row = 0; row < RetData::row_limit(); row++) { + Label next_test; + + // See if return_bci is equal to bci[n]: + test_mdp_data_at(mdp, + in_bytes(RetData::bci_offset(row)), + return_bci, noreg, + next_test); + + // return_bci is equal to bci[n]. Increment the count. + increment_mdp_data_at(mdp, in_bytes(RetData::bci_count_offset(row))); + + // The method data pointer needs to be updated to reflect the new target. + update_mdp_by_offset(mdp, + in_bytes(RetData::bci_displacement_offset(row))); + b(profile_continue); + bind(next_test); + } + + update_mdp_for_ret(return_bci); + + bind(profile_continue); + } +} + +void InterpreterMacroAssembler::profile_null_seen(Register mdp) { + if (ProfileInterpreter) { + Label profile_continue; + + // If no method data exists, go to profile_continue. + test_method_data_pointer(mdp, profile_continue); + + set_mdp_flag_at(mdp, BitData::null_seen_byte_constant()); + + // The method data pointer needs to be updated. + int mdp_delta = in_bytes(BitData::bit_data_size()); + if (TypeProfileCasts) { + mdp_delta = in_bytes(VirtualCallData::virtual_call_data_size()); + } + update_mdp_by_constant(mdp, mdp_delta); + + bind(profile_continue); + } +} + +void InterpreterMacroAssembler::profile_typecheck_failed(Register mdp) { + if (ProfileInterpreter && TypeProfileCasts) { + Label profile_continue; + + // If no method data exists, go to profile_continue. + test_method_data_pointer(mdp, profile_continue); + + int count_offset = in_bytes(CounterData::count_offset()); + // Back up the address, since we have already bumped the mdp. + count_offset -= in_bytes(VirtualCallData::virtual_call_data_size()); + + // *Decrement* the counter. We expect to see zero or small negatives. + increment_mdp_data_at(mdp, count_offset, true); + + bind (profile_continue); + } +} + +void InterpreterMacroAssembler::profile_typecheck(Register mdp, Register klass, Register reg2) { + if (ProfileInterpreter) { + Label profile_continue; + + // If no method data exists, go to profile_continue. + test_method_data_pointer(mdp, profile_continue); + + // The method data pointer needs to be updated. + int mdp_delta = in_bytes(BitData::bit_data_size()); + if (TypeProfileCasts) { + mdp_delta = in_bytes(VirtualCallData::virtual_call_data_size()); + + // Record the object type. + record_klass_in_profile(klass, mdp, reg2, false); + } + update_mdp_by_constant(mdp, mdp_delta); + + bind(profile_continue); + } +} + +void InterpreterMacroAssembler::profile_switch_default(Register mdp) { + if (ProfileInterpreter) { + Label profile_continue; + + // If no method data exists, go to profile_continue. + test_method_data_pointer(mdp, profile_continue); + + // Update the default case count + increment_mdp_data_at(mdp, + in_bytes(MultiBranchData::default_count_offset())); + + // The method data pointer needs to be updated. + update_mdp_by_offset(mdp, + in_bytes(MultiBranchData:: + default_displacement_offset())); + + bind(profile_continue); + } +} + +void InterpreterMacroAssembler::profile_switch_case(Register index, + Register mdp, + Register reg2) { + if (ProfileInterpreter) { + Label profile_continue; + + // If no method data exists, go to profile_continue. + test_method_data_pointer(mdp, profile_continue); + + // Build the base (index * per_case_size_in_bytes()) + + // case_array_offset_in_bytes() + movw(reg2, in_bytes(MultiBranchData::per_case_size())); + movw(rscratch1, in_bytes(MultiBranchData::case_array_offset())); + Assembler::maddw(index, index, reg2, rscratch1); + + // Update the case count + increment_mdp_data_at(mdp, + index, + in_bytes(MultiBranchData::relative_count_offset())); + + // The method data pointer needs to be updated. + update_mdp_by_offset(mdp, + index, + in_bytes(MultiBranchData:: + relative_displacement_offset())); + + bind(profile_continue); + } +} + +void InterpreterMacroAssembler::verify_oop(Register reg, TosState state) { + if (state == atos) { + MacroAssembler::verify_oop(reg); + } +} + +void InterpreterMacroAssembler::verify_FPU(int stack_depth, TosState state) { ; } +#endif // !CC_INTERP + + +void InterpreterMacroAssembler::notify_method_entry() { + // Whenever JVMTI is interp_only_mode, method entry/exit events are sent to + // track stack depth. If it is possible to enter interp_only_mode we add + // the code to check if the event should be sent. + if (JvmtiExport::can_post_interpreter_events()) { + Label L; + ldrw(r3, Address(rthread, JavaThread::interp_only_mode_offset())); + cbzw(r3, L); + call_VM(noreg, CAST_FROM_FN_PTR(address, + InterpreterRuntime::post_method_entry)); + bind(L); + } + + { + SkipIfEqual skip(this, &DTraceMethodProbes, false); + get_method(c_rarg1); + call_VM_leaf(CAST_FROM_FN_PTR(address, SharedRuntime::dtrace_method_entry), + rthread, c_rarg1); + } + + // RedefineClasses() tracing support for obsolete method entry + if (RC_TRACE_IN_RANGE(0x00001000, 0x00002000)) { + get_method(c_rarg1); + call_VM_leaf( + CAST_FROM_FN_PTR(address, SharedRuntime::rc_trace_method_entry), + rthread, c_rarg1); + } + + } + + +void InterpreterMacroAssembler::notify_method_exit( + TosState state, NotifyMethodExitMode mode) { + // Whenever JVMTI is interp_only_mode, method entry/exit events are sent to + // track stack depth. If it is possible to enter interp_only_mode we add + // the code to check if the event should be sent. + if (mode == NotifyJVMTI && JvmtiExport::can_post_interpreter_events()) { + Label L; + // Note: frame::interpreter_frame_result has a dependency on how the + // method result is saved across the call to post_method_exit. If this + // is changed then the interpreter_frame_result implementation will + // need to be updated too. + + // For c++ interpreter the result is always stored at a known location in the frame + // template interpreter will leave it on the top of the stack. + NOT_CC_INTERP(push(state);) + ldrw(r3, Address(rthread, JavaThread::interp_only_mode_offset())); + cbz(r3, L); + call_VM(noreg, + CAST_FROM_FN_PTR(address, InterpreterRuntime::post_method_exit)); + bind(L); + NOT_CC_INTERP(pop(state)); + } + + { + SkipIfEqual skip(this, &DTraceMethodProbes, false); + NOT_CC_INTERP(push(state)); + get_method(c_rarg1); + call_VM_leaf(CAST_FROM_FN_PTR(address, SharedRuntime::dtrace_method_exit), + rthread, c_rarg1); + NOT_CC_INTERP(pop(state)); + } +} + + +// Jump if ((*counter_addr += increment) & mask) satisfies the condition. +void InterpreterMacroAssembler::increment_mask_and_jump(Address counter_addr, + int increment, int mask, + Register scratch, Register scratch2, + bool preloaded, + Condition cond, Label* where) { + if (!preloaded) { + ldrw(scratch, counter_addr); + } + add(scratch, scratch, increment); + strw(scratch, counter_addr); + if (operand_valid_for_logical_immediate(/*is32*/true, mask)) { + andsw(scratch, scratch, mask); + } else { + movw(scratch2, (unsigned)mask); + andsw(scratch, scratch, scratch2); + } + br(cond, *where); +} + +void InterpreterMacroAssembler::call_VM_leaf_base(address entry_point, + int number_of_arguments) { + // interpreter specific + // + // Note: No need to save/restore rbcp & rlocals pointer since these + // are callee saved registers and no blocking/ GC can happen + // in leaf calls. +#ifdef ASSERT + { + Label L; + ldr(rscratch1, Address(rfp, frame::interpreter_frame_last_sp_offset * wordSize)); + cbz(rscratch1, L); + stop("InterpreterMacroAssembler::call_VM_leaf_base:" + " last_sp != NULL"); + bind(L); + } +#endif /* ASSERT */ + // super call + MacroAssembler::call_VM_leaf_base(entry_point, number_of_arguments); +} + +void InterpreterMacroAssembler::call_VM_base(Register oop_result, + Register java_thread, + Register last_java_sp, + address entry_point, + int number_of_arguments, + bool check_exceptions) { + // interpreter specific + // + // Note: Could avoid restoring locals ptr (callee saved) - however doesn't + // really make a difference for these runtime calls, since they are + // slow anyway. Btw., bcp must be saved/restored since it may change + // due to GC. + // assert(java_thread == noreg , "not expecting a precomputed java thread"); + save_bcp(); +#ifdef ASSERT + { + Label L; + ldr(rscratch1, Address(rfp, frame::interpreter_frame_last_sp_offset * wordSize)); + cbz(rscratch1, L); + stop("InterpreterMacroAssembler::call_VM_leaf_base:" + " last_sp != NULL"); + bind(L); + } +#endif /* ASSERT */ + // super call + MacroAssembler::call_VM_base(oop_result, noreg, last_java_sp, + entry_point, number_of_arguments, + check_exceptions); +// interpreter specific + restore_bcp(); + restore_locals(); +} + +void InterpreterMacroAssembler::profile_obj_type(Register obj, const Address& mdo_addr) { + Label update, next, none; + + verify_oop(obj); + + cbnz(obj, update); + orptr(mdo_addr, TypeEntries::null_seen); + b(next); + + bind(update); + load_klass(obj, obj); + + ldr(rscratch1, mdo_addr); + eor(obj, obj, rscratch1); + tst(obj, TypeEntries::type_klass_mask); + br(Assembler::EQ, next); // klass seen before, nothing to + // do. The unknown bit may have been + // set already but no need to check. + + tst(obj, TypeEntries::type_unknown); + br(Assembler::NE, next); // already unknown. Nothing to do anymore. + + ldr(rscratch1, mdo_addr); + cbz(rscratch1, none); + cmp(rscratch1, TypeEntries::null_seen); + br(Assembler::EQ, none); + // There is a chance that the checks above (re-reading profiling + // data from memory) fail if another thread has just set the + // profiling to this obj's klass + ldr(rscratch1, mdo_addr); + eor(obj, obj, rscratch1); + tst(obj, TypeEntries::type_klass_mask); + br(Assembler::EQ, next); + + // different than before. Cannot keep accurate profile. + orptr(mdo_addr, TypeEntries::type_unknown); + b(next); + + bind(none); + // first time here. Set profile type. + str(obj, mdo_addr); + + bind(next); +} + +void InterpreterMacroAssembler::profile_arguments_type(Register mdp, Register callee, Register tmp, bool is_virtual) { + if (!ProfileInterpreter) { + return; + } + + if (MethodData::profile_arguments() || MethodData::profile_return()) { + Label profile_continue; + + test_method_data_pointer(mdp, profile_continue); + + int off_to_start = is_virtual ? in_bytes(VirtualCallData::virtual_call_data_size()) : in_bytes(CounterData::counter_data_size()); + + ldrb(rscratch1, Address(mdp, in_bytes(DataLayout::tag_offset()) - off_to_start)); + cmp(rscratch1, is_virtual ? DataLayout::virtual_call_type_data_tag : DataLayout::call_type_data_tag); + br(Assembler::NE, profile_continue); + + if (MethodData::profile_arguments()) { + Label done; + int off_to_args = in_bytes(TypeEntriesAtCall::args_data_offset()); + + for (int i = 0; i < TypeProfileArgsLimit; i++) { + if (i > 0 || MethodData::profile_return()) { + // If return value type is profiled we may have no argument to profile + ldr(tmp, Address(mdp, in_bytes(TypeEntriesAtCall::cell_count_offset()))); + sub(tmp, tmp, i*TypeStackSlotEntries::per_arg_count()); + cmp(tmp, TypeStackSlotEntries::per_arg_count()); + add(rscratch1, mdp, off_to_args); + br(Assembler::LT, done); + } + ldr(tmp, Address(callee, Method::const_offset())); + load_unsigned_short(tmp, Address(tmp, ConstMethod::size_of_parameters_offset())); + // stack offset o (zero based) from the start of the argument + // list, for n arguments translates into offset n - o - 1 from + // the end of the argument list + ldr(rscratch1, Address(mdp, in_bytes(TypeEntriesAtCall::stack_slot_offset(i)))); + sub(tmp, tmp, rscratch1); + sub(tmp, tmp, 1); + Address arg_addr = argument_address(tmp); + ldr(tmp, arg_addr); + + Address mdo_arg_addr(mdp, in_bytes(TypeEntriesAtCall::argument_type_offset(i))); + profile_obj_type(tmp, mdo_arg_addr); + + int to_add = in_bytes(TypeStackSlotEntries::per_arg_size()); + off_to_args += to_add; + } + + if (MethodData::profile_return()) { + ldr(tmp, Address(mdp, in_bytes(TypeEntriesAtCall::cell_count_offset()))); + sub(tmp, tmp, TypeProfileArgsLimit*TypeStackSlotEntries::per_arg_count()); + } + + add(rscratch1, mdp, off_to_args); + bind(done); + mov(mdp, rscratch1); + + if (MethodData::profile_return()) { + // We're right after the type profile for the last + // argument. tmp is the number of cells left in the + // CallTypeData/VirtualCallTypeData to reach its end. Non null + // if there's a return to profile. + assert(ReturnTypeEntry::static_cell_count() < TypeStackSlotEntries::per_arg_count(), "can't move past ret type"); + add(mdp, mdp, tmp, LSL, exact_log2(DataLayout::cell_size)); + } + str(mdp, Address(rfp, frame::interpreter_frame_mdx_offset * wordSize)); + } else { + assert(MethodData::profile_return(), "either profile call args or call ret"); + update_mdp_by_constant(mdp, in_bytes(TypeEntriesAtCall::return_only_size())); + } + + // mdp points right after the end of the + // CallTypeData/VirtualCallTypeData, right after the cells for the + // return value type if there's one + + bind(profile_continue); + } +} + +void InterpreterMacroAssembler::profile_return_type(Register mdp, Register ret, Register tmp) { + assert_different_registers(mdp, ret, tmp, rbcp); + if (ProfileInterpreter && MethodData::profile_return()) { + Label profile_continue, done; + + test_method_data_pointer(mdp, profile_continue); + + if (MethodData::profile_return_jsr292_only()) { + // If we don't profile all invoke bytecodes we must make sure + // it's a bytecode we indeed profile. We can't go back to the + // begining of the ProfileData we intend to update to check its + // type because we're right after it and we don't known its + // length + Label do_profile; + ldrb(rscratch1, Address(rbcp, 0)); + cmp(rscratch1, Bytecodes::_invokedynamic); + br(Assembler::EQ, do_profile); + cmp(rscratch1, Bytecodes::_invokehandle); + br(Assembler::EQ, do_profile); + get_method(tmp); + ldrb(rscratch1, Address(tmp, Method::intrinsic_id_offset_in_bytes())); + cmp(rscratch1, vmIntrinsics::_compiledLambdaForm); + br(Assembler::NE, profile_continue); + + bind(do_profile); + } + + Address mdo_ret_addr(mdp, -in_bytes(ReturnTypeEntry::size())); + mov(tmp, ret); + profile_obj_type(tmp, mdo_ret_addr); + + bind(profile_continue); + } +} + +void InterpreterMacroAssembler::profile_parameters_type(Register mdp, Register tmp1, Register tmp2) { + if (ProfileInterpreter && MethodData::profile_parameters()) { + Label profile_continue, done; + + test_method_data_pointer(mdp, profile_continue); + + // Load the offset of the area within the MDO used for + // parameters. If it's negative we're not profiling any parameters + ldr(tmp1, Address(mdp, in_bytes(MethodData::parameters_type_data_di_offset()) - in_bytes(MethodData::data_offset()))); + cmp(tmp1, 0u); + br(Assembler::LT, profile_continue); + + // Compute a pointer to the area for parameters from the offset + // and move the pointer to the slot for the last + // parameters. Collect profiling from last parameter down. + // mdo start + parameters offset + array length - 1 + add(mdp, mdp, tmp1); + ldr(tmp1, Address(mdp, ArrayData::array_len_offset())); + sub(tmp1, tmp1, TypeStackSlotEntries::per_arg_count()); + + Label loop; + bind(loop); + + int off_base = in_bytes(ParametersTypeData::stack_slot_offset(0)); + int type_base = in_bytes(ParametersTypeData::type_offset(0)); + int per_arg_scale = exact_log2(DataLayout::cell_size); + add(rscratch1, mdp, off_base); + add(rscratch2, mdp, type_base); + + Address arg_off(rscratch1, tmp1, Address::lsl(per_arg_scale)); + Address arg_type(rscratch2, tmp1, Address::lsl(per_arg_scale)); + + // load offset on the stack from the slot for this parameter + ldr(tmp2, arg_off); + neg(tmp2, tmp2); + // read the parameter from the local area + ldr(tmp2, Address(rlocals, tmp2, Address::lsl(Interpreter::logStackElementSize))); + + // profile the parameter + profile_obj_type(tmp2, arg_type); + + // go to next parameter + subs(tmp1, tmp1, TypeStackSlotEntries::per_arg_count()); + br(Assembler::GE, loop); + + bind(profile_continue); + } +}