--- /dev/null	2018-10-01 11:30:56.436681000 +0530
+++ new/modules/javafx.graphics/src/main/native-iio/libjpeg9c/jddctmgr.c	2018-10-01 15:50:25.341500688 +0530
@@ -0,0 +1,384 @@
+/*
+ * jddctmgr.c
+ *
+ * Copyright (C) 1994-1996, Thomas G. Lane.
+ * Modified 2002-2013 by Guido Vollbeding.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains the inverse-DCT management logic.
+ * This code selects a particular IDCT implementation to be used,
+ * and it performs related housekeeping chores.  No code in this file
+ * is executed per IDCT step, only during output pass setup.
+ *
+ * Note that the IDCT routines are responsible for performing coefficient
+ * dequantization as well as the IDCT proper.  This module sets up the
+ * dequantization multiplier table needed by the IDCT routine.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+#include "jdct.h"		/* Private declarations for DCT subsystem */
+
+
+/*
+ * The decompressor input side (jdinput.c) saves away the appropriate
+ * quantization table for each component at the start of the first scan
+ * involving that component.  (This is necessary in order to correctly
+ * decode files that reuse Q-table slots.)
+ * When we are ready to make an output pass, the saved Q-table is converted
+ * to a multiplier table that will actually be used by the IDCT routine.
+ * The multiplier table contents are IDCT-method-dependent.  To support
+ * application changes in IDCT method between scans, we can remake the
+ * multiplier tables if necessary.
+ * In buffered-image mode, the first output pass may occur before any data
+ * has been seen for some components, and thus before their Q-tables have
+ * been saved away.  To handle this case, multiplier tables are preset
+ * to zeroes; the result of the IDCT will be a neutral gray level.
+ */
+
+
+/* Private subobject for this module */
+
+typedef struct {
+  struct jpeg_inverse_dct pub;	/* public fields */
+
+  /* This array contains the IDCT method code that each multiplier table
+   * is currently set up for, or -1 if it's not yet set up.
+   * The actual multiplier tables are pointed to by dct_table in the
+   * per-component comp_info structures.
+   */
+  int cur_method[MAX_COMPONENTS];
+} my_idct_controller;
+
+typedef my_idct_controller * my_idct_ptr;
+
+
+/* Allocated multiplier tables: big enough for any supported variant */
+
+typedef union {
+  ISLOW_MULT_TYPE islow_array[DCTSIZE2];
+#ifdef DCT_IFAST_SUPPORTED
+  IFAST_MULT_TYPE ifast_array[DCTSIZE2];
+#endif
+#ifdef DCT_FLOAT_SUPPORTED
+  FLOAT_MULT_TYPE float_array[DCTSIZE2];
+#endif
+} multiplier_table;
+
+
+/* The current scaled-IDCT routines require ISLOW-style multiplier tables,
+ * so be sure to compile that code if either ISLOW or SCALING is requested.
+ */
+#ifdef DCT_ISLOW_SUPPORTED
+#define PROVIDE_ISLOW_TABLES
+#else
+#ifdef IDCT_SCALING_SUPPORTED
+#define PROVIDE_ISLOW_TABLES
+#endif
+#endif
+
+
+/*
+ * Prepare for an output pass.
+ * Here we select the proper IDCT routine for each component and build
+ * a matching multiplier table.
+ */
+
+METHODDEF(void)
+start_pass (j_decompress_ptr cinfo)
+{
+  my_idct_ptr idct = (my_idct_ptr) cinfo->idct;
+  int ci, i;
+  jpeg_component_info *compptr;
+  int method = 0;
+  inverse_DCT_method_ptr method_ptr = NULL;
+  JQUANT_TBL * qtbl;
+
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    /* Select the proper IDCT routine for this component's scaling */
+    switch ((compptr->DCT_h_scaled_size << 8) + compptr->DCT_v_scaled_size) {
+#ifdef IDCT_SCALING_SUPPORTED
+    case ((1 << 8) + 1):
+      method_ptr = jpeg_idct_1x1;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((2 << 8) + 2):
+      method_ptr = jpeg_idct_2x2;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((3 << 8) + 3):
+      method_ptr = jpeg_idct_3x3;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((4 << 8) + 4):
+      method_ptr = jpeg_idct_4x4;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((5 << 8) + 5):
+      method_ptr = jpeg_idct_5x5;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((6 << 8) + 6):
+      method_ptr = jpeg_idct_6x6;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((7 << 8) + 7):
+      method_ptr = jpeg_idct_7x7;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((9 << 8) + 9):
+      method_ptr = jpeg_idct_9x9;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((10 << 8) + 10):
+      method_ptr = jpeg_idct_10x10;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((11 << 8) + 11):
+      method_ptr = jpeg_idct_11x11;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((12 << 8) + 12):
+      method_ptr = jpeg_idct_12x12;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((13 << 8) + 13):
+      method_ptr = jpeg_idct_13x13;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((14 << 8) + 14):
+      method_ptr = jpeg_idct_14x14;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((15 << 8) + 15):
+      method_ptr = jpeg_idct_15x15;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((16 << 8) + 16):
+      method_ptr = jpeg_idct_16x16;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((16 << 8) + 8):
+      method_ptr = jpeg_idct_16x8;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((14 << 8) + 7):
+      method_ptr = jpeg_idct_14x7;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((12 << 8) + 6):
+      method_ptr = jpeg_idct_12x6;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((10 << 8) + 5):
+      method_ptr = jpeg_idct_10x5;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((8 << 8) + 4):
+      method_ptr = jpeg_idct_8x4;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((6 << 8) + 3):
+      method_ptr = jpeg_idct_6x3;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((4 << 8) + 2):
+      method_ptr = jpeg_idct_4x2;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((2 << 8) + 1):
+      method_ptr = jpeg_idct_2x1;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((8 << 8) + 16):
+      method_ptr = jpeg_idct_8x16;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((7 << 8) + 14):
+      method_ptr = jpeg_idct_7x14;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((6 << 8) + 12):
+      method_ptr = jpeg_idct_6x12;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((5 << 8) + 10):
+      method_ptr = jpeg_idct_5x10;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((4 << 8) + 8):
+      method_ptr = jpeg_idct_4x8;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((3 << 8) + 6):
+      method_ptr = jpeg_idct_3x6;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((2 << 8) + 4):
+      method_ptr = jpeg_idct_2x4;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((1 << 8) + 2):
+      method_ptr = jpeg_idct_1x2;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+#endif
+    case ((DCTSIZE << 8) + DCTSIZE):
+      switch (cinfo->dct_method) {
+#ifdef DCT_ISLOW_SUPPORTED
+      case JDCT_ISLOW:
+	method_ptr = jpeg_idct_islow;
+	method = JDCT_ISLOW;
+	break;
+#endif
+#ifdef DCT_IFAST_SUPPORTED
+      case JDCT_IFAST:
+	method_ptr = jpeg_idct_ifast;
+	method = JDCT_IFAST;
+	break;
+#endif
+#ifdef DCT_FLOAT_SUPPORTED
+      case JDCT_FLOAT:
+	method_ptr = jpeg_idct_float;
+	method = JDCT_FLOAT;
+	break;
+#endif
+      default:
+	ERREXIT(cinfo, JERR_NOT_COMPILED);
+	break;
+      }
+      break;
+    default:
+      ERREXIT2(cinfo, JERR_BAD_DCTSIZE,
+	       compptr->DCT_h_scaled_size, compptr->DCT_v_scaled_size);
+      break;
+    }
+    idct->pub.inverse_DCT[ci] = method_ptr;
+    /* Create multiplier table from quant table.
+     * However, we can skip this if the component is uninteresting
+     * or if we already built the table.  Also, if no quant table
+     * has yet been saved for the component, we leave the
+     * multiplier table all-zero; we'll be reading zeroes from the
+     * coefficient controller's buffer anyway.
+     */
+    if (! compptr->component_needed || idct->cur_method[ci] == method)
+      continue;
+    qtbl = compptr->quant_table;
+    if (qtbl == NULL)		/* happens if no data yet for component */
+      continue;
+    idct->cur_method[ci] = method;
+    switch (method) {
+#ifdef PROVIDE_ISLOW_TABLES
+    case JDCT_ISLOW:
+      {
+	/* For LL&M IDCT method, multipliers are equal to raw quantization
+	 * coefficients, but are stored as ints to ensure access efficiency.
+	 */
+	ISLOW_MULT_TYPE * ismtbl = (ISLOW_MULT_TYPE *) compptr->dct_table;
+	for (i = 0; i < DCTSIZE2; i++) {
+	  ismtbl[i] = (ISLOW_MULT_TYPE) qtbl->quantval[i];
+	}
+      }
+      break;
+#endif
+#ifdef DCT_IFAST_SUPPORTED
+    case JDCT_IFAST:
+      {
+	/* For AA&N IDCT method, multipliers are equal to quantization
+	 * coefficients scaled by scalefactor[row]*scalefactor[col], where
+	 *   scalefactor[0] = 1
+	 *   scalefactor[k] = cos(k*PI/16) * sqrt(2)    for k=1..7
+	 * For integer operation, the multiplier table is to be scaled by
+	 * IFAST_SCALE_BITS.
+	 */
+	IFAST_MULT_TYPE * ifmtbl = (IFAST_MULT_TYPE *) compptr->dct_table;
+#define CONST_BITS 14
+	static const INT16 aanscales[DCTSIZE2] = {
+	  /* precomputed values scaled up by 14 bits */
+	  16384, 22725, 21407, 19266, 16384, 12873,  8867,  4520,
+	  22725, 31521, 29692, 26722, 22725, 17855, 12299,  6270,
+	  21407, 29692, 27969, 25172, 21407, 16819, 11585,  5906,
+	  19266, 26722, 25172, 22654, 19266, 15137, 10426,  5315,
+	  16384, 22725, 21407, 19266, 16384, 12873,  8867,  4520,
+	  12873, 17855, 16819, 15137, 12873, 10114,  6967,  3552,
+	   8867, 12299, 11585, 10426,  8867,  6967,  4799,  2446,
+	   4520,  6270,  5906,  5315,  4520,  3552,  2446,  1247
+	};
+	SHIFT_TEMPS
+
+	for (i = 0; i < DCTSIZE2; i++) {
+	  ifmtbl[i] = (IFAST_MULT_TYPE)
+	    DESCALE(MULTIPLY16V16((INT32) qtbl->quantval[i],
+				  (INT32) aanscales[i]),
+		    CONST_BITS-IFAST_SCALE_BITS);
+	}
+      }
+      break;
+#endif
+#ifdef DCT_FLOAT_SUPPORTED
+    case JDCT_FLOAT:
+      {
+	/* For float AA&N IDCT method, multipliers are equal to quantization
+	 * coefficients scaled by scalefactor[row]*scalefactor[col], where
+	 *   scalefactor[0] = 1
+	 *   scalefactor[k] = cos(k*PI/16) * sqrt(2)    for k=1..7
+	 * We apply a further scale factor of 1/8.
+	 */
+	FLOAT_MULT_TYPE * fmtbl = (FLOAT_MULT_TYPE *) compptr->dct_table;
+	int row, col;
+	static const double aanscalefactor[DCTSIZE] = {
+	  1.0, 1.387039845, 1.306562965, 1.175875602,
+	  1.0, 0.785694958, 0.541196100, 0.275899379
+	};
+
+	i = 0;
+	for (row = 0; row < DCTSIZE; row++) {
+	  for (col = 0; col < DCTSIZE; col++) {
+	    fmtbl[i] = (FLOAT_MULT_TYPE)
+	      ((double) qtbl->quantval[i] *
+	       aanscalefactor[row] * aanscalefactor[col] * 0.125);
+	    i++;
+	  }
+	}
+      }
+      break;
+#endif
+    default:
+      ERREXIT(cinfo, JERR_NOT_COMPILED);
+      break;
+    }
+  }
+}
+
+
+/*
+ * Initialize IDCT manager.
+ */
+
+GLOBAL(void)
+jinit_inverse_dct (j_decompress_ptr cinfo)
+{
+  my_idct_ptr idct;
+  int ci;
+  jpeg_component_info *compptr;
+
+  idct = (my_idct_ptr)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				SIZEOF(my_idct_controller));
+  cinfo->idct = &idct->pub;
+  idct->pub.start_pass = start_pass;
+
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    /* Allocate and pre-zero a multiplier table for each component */
+    compptr->dct_table =
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				  SIZEOF(multiplier_table));
+    MEMZERO(compptr->dct_table, SIZEOF(multiplier_table));
+    /* Mark multiplier table not yet set up for any method */
+    idct->cur_method[ci] = -1;
+  }
+}