1 /* 2 * Copyright (c) 1997, 2020, Oracle and/or its affiliates. All rights reserved. 3 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. 4 * 5 * This code is free software; you can redistribute it and/or modify it 6 * under the terms of the GNU General Public License version 2 only, as 7 * published by the Free Software Foundation. 8 * 9 * This code is distributed in the hope that it will be useful, but WITHOUT 10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License 12 * version 2 for more details (a copy is included in the LICENSE file that 13 * accompanied this code). 14 * 15 * You should have received a copy of the GNU General Public License version 16 * 2 along with this work; if not, write to the Free Software Foundation, 17 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. 18 * 19 * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA 20 * or visit www.oracle.com if you need additional information or have any 21 * questions. 22 * 23 */ 24 25 #ifndef SHARE_RUNTIME_GLOBALS_HPP 26 #define SHARE_RUNTIME_GLOBALS_HPP 27 28 #include "compiler/compiler_globals.hpp" 29 #include "gc/shared/gc_globals.hpp" 30 #include "runtime/globals_shared.hpp" 31 #include "utilities/align.hpp" 32 #include "utilities/globalDefinitions.hpp" 33 #include "utilities/macros.hpp" 34 #include CPU_HEADER(globals) 35 #include OS_HEADER(globals) 36 #include OS_CPU_HEADER(globals) 37 38 // develop flags are settable / visible only during development and are constant in the PRODUCT version 39 // product flags are always settable / visible 40 // notproduct flags are settable / visible only during development and are not declared in the PRODUCT version 41 42 // A flag must be declared with one of the following types: 43 // bool, int, uint, intx, uintx, size_t, ccstr, ccstrlist, double, or uint64_t. 44 // The type "ccstr" and "ccstrlist" are an alias for "const char*" and is used 45 // only in this file, because the macrology requires single-token type names. 46 47 // Note: Diagnostic options not meant for VM tuning or for product modes. 48 // They are to be used for VM quality assurance or field diagnosis 49 // of VM bugs. They are hidden so that users will not be encouraged to 50 // try them as if they were VM ordinary execution options. However, they 51 // are available in the product version of the VM. Under instruction 52 // from support engineers, VM customers can turn them on to collect 53 // diagnostic information about VM problems. To use a VM diagnostic 54 // option, you must first specify +UnlockDiagnosticVMOptions. 55 // (This master switch also affects the behavior of -Xprintflags.) 56 // 57 // experimental flags are in support of features that are not 58 // part of the officially supported product, but are available 59 // for experimenting with. They could, for example, be performance 60 // features that may not have undergone full or rigorous QA, but which may 61 // help performance in some cases and released for experimentation 62 // by the community of users and developers. This flag also allows one to 63 // be able to build a fully supported product that nonetheless also 64 // ships with some unsupported, lightly tested, experimental features. 65 // Like the UnlockDiagnosticVMOptions flag above, there is a corresponding 66 // UnlockExperimentalVMOptions flag, which allows the control and 67 // modification of the experimental flags. 68 // 69 // Nota bene: neither diagnostic nor experimental options should be used casually, 70 // and they are not supported on production loads, except under explicit 71 // direction from support engineers. 72 // 73 // manageable flags are writeable external product flags. 74 // They are dynamically writeable through the JDK management interface 75 // (com.sun.management.HotSpotDiagnosticMXBean API) and also through JConsole. 76 // These flags are external exported interface (see CCC). The list of 77 // manageable flags can be queried programmatically through the management 78 // interface. 79 // 80 // A flag can be made as "manageable" only if 81 // - the flag is defined in a CCC as an external exported interface. 82 // - the VM implementation supports dynamic setting of the flag. 83 // This implies that the VM must *always* query the flag variable 84 // and not reuse state related to the flag state at any given time. 85 // - you want the flag to be queried programmatically by the customers. 86 // 87 // product_rw flags are writeable internal product flags. 88 // They are like "manageable" flags but for internal/private use. 89 // The list of product_rw flags are internal/private flags which 90 // may be changed/removed in a future release. It can be set 91 // through the management interface to get/set value 92 // when the name of flag is supplied. 93 // 94 // A flag can be made as "product_rw" only if 95 // - the VM implementation supports dynamic setting of the flag. 96 // This implies that the VM must *always* query the flag variable 97 // and not reuse state related to the flag state at any given time. 98 // 99 // Note that when there is a need to support develop flags to be writeable, 100 // it can be done in the same way as product_rw. 101 // 102 // range is a macro that will expand to min and max arguments for range 103 // checking code if provided - see jvmFlagRangeList.hpp 104 // 105 // constraint is a macro that will expand to custom function call 106 // for constraint checking if provided - see jvmFlagConstraintList.hpp 107 108 // Default and minimum StringTable and SymbolTable size values 109 // Must be powers of 2 110 const size_t defaultStringTableSize = NOT_LP64(1024) LP64_ONLY(65536); 111 const size_t minimumStringTableSize = 128; 112 const size_t defaultSymbolTableSize = 32768; // 2^15 113 const size_t minimumSymbolTableSize = 1024; 114 115 #define RUNTIME_FLAGS(develop, \ 116 develop_pd, \ 117 product, \ 118 product_pd, \ 119 diagnostic, \ 120 diagnostic_pd, \ 121 experimental, \ 122 notproduct, \ 123 manageable, \ 124 product_rw, \ 125 lp64_product, \ 126 range, \ 127 constraint) \ 128 \ 129 lp64_product(bool, UseCompressedOops, false, \ 130 "Use 32-bit object references in 64-bit VM. " \ 131 "lp64_product means flag is always constant in 32 bit VM") \ 132 \ 133 lp64_product(bool, UseCompressedClassPointers, false, \ 134 "Use 32-bit class pointers in 64-bit VM. " \ 135 "lp64_product means flag is always constant in 32 bit VM") \ 136 \ 137 notproduct(bool, CheckCompressedOops, true, \ 138 "Generate checks in encoding/decoding code in debug VM") \ 139 \ 140 product(uintx, HeapSearchSteps, 3 PPC64_ONLY(+17), \ 141 "Heap allocation steps through preferred address regions to find" \ 142 " where it can allocate the heap. Number of steps to take per " \ 143 "region.") \ 144 range(1, max_uintx) \ 145 \ 146 lp64_product(intx, ObjectAlignmentInBytes, 8, \ 147 "Default object alignment in bytes, 8 is minimum") \ 148 range(8, 256) \ 149 constraint(ObjectAlignmentInBytesConstraintFunc,AtParse) \ 150 \ 151 develop(bool, CleanChunkPoolAsync, true, \ 152 "Clean the chunk pool asynchronously") \ 153 \ 154 diagnostic(uint, HandshakeTimeout, 0, \ 155 "If nonzero set a timeout in milliseconds for handshakes") \ 156 \ 157 experimental(bool, AlwaysSafeConstructors, false, \ 158 "Force safe construction, as if all fields are final.") \ 159 \ 160 diagnostic(bool, UnlockDiagnosticVMOptions, trueInDebug, \ 161 "Enable normal processing of flags relating to field diagnostics")\ 162 \ 163 experimental(bool, UnlockExperimentalVMOptions, false, \ 164 "Enable normal processing of flags relating to experimental " \ 165 "features") \ 166 \ 167 product(bool, JavaMonitorsInStackTrace, true, \ 168 "Print information about Java monitor locks when the stacks are" \ 169 "dumped") \ 170 \ 171 product_pd(bool, UseLargePages, \ 172 "Use large page memory") \ 173 \ 174 product_pd(bool, UseLargePagesIndividualAllocation, \ 175 "Allocate large pages individually for better affinity") \ 176 \ 177 develop(bool, LargePagesIndividualAllocationInjectError, false, \ 178 "Fail large pages individual allocation") \ 179 \ 180 product(bool, UseLargePagesInMetaspace, false, \ 181 "Use large page memory in metaspace. " \ 182 "Only used if UseLargePages is enabled.") \ 183 \ 184 product(bool, UseNUMA, false, \ 185 "Use NUMA if available") \ 186 \ 187 product(bool, UseNUMAInterleaving, false, \ 188 "Interleave memory across NUMA nodes if available") \ 189 \ 190 product(size_t, NUMAInterleaveGranularity, 2*M, \ 191 "Granularity to use for NUMA interleaving on Windows OS") \ 192 range(os::vm_allocation_granularity(), NOT_LP64(2*G) LP64_ONLY(8192*G)) \ 193 \ 194 product(bool, ForceNUMA, false, \ 195 "Force NUMA optimizations on single-node/UMA systems") \ 196 \ 197 product(uintx, NUMAChunkResizeWeight, 20, \ 198 "Percentage (0-100) used to weight the current sample when " \ 199 "computing exponentially decaying average for " \ 200 "AdaptiveNUMAChunkSizing") \ 201 range(0, 100) \ 202 \ 203 product(size_t, NUMASpaceResizeRate, 1*G, \ 204 "Do not reallocate more than this amount per collection") \ 205 range(0, max_uintx) \ 206 \ 207 product(bool, UseAdaptiveNUMAChunkSizing, true, \ 208 "Enable adaptive chunk sizing for NUMA") \ 209 \ 210 product(bool, NUMAStats, false, \ 211 "Print NUMA stats in detailed heap information") \ 212 \ 213 product(uintx, NUMAPageScanRate, 256, \ 214 "Maximum number of pages to include in the page scan procedure") \ 215 range(0, max_uintx) \ 216 \ 217 product(intx, UseSSE, 99, \ 218 "Highest supported SSE instructions set on x86/x64") \ 219 range(0, 99) \ 220 \ 221 product(bool, UseAES, false, \ 222 "Control whether AES instructions are used when available") \ 223 \ 224 product(bool, UseFMA, false, \ 225 "Control whether FMA instructions are used when available") \ 226 \ 227 product(bool, UseSHA, false, \ 228 "Control whether SHA instructions are used when available") \ 229 \ 230 diagnostic(bool, UseGHASHIntrinsics, false, \ 231 "Use intrinsics for GHASH versions of crypto") \ 232 \ 233 product(bool, UseBASE64Intrinsics, false, \ 234 "Use intrinsics for java.util.Base64") \ 235 \ 236 product(size_t, LargePageSizeInBytes, 0, \ 237 "Large page size (0 to let VM choose the page size)") \ 238 range(0, max_uintx) \ 239 \ 240 product(size_t, LargePageHeapSizeThreshold, 128*M, \ 241 "Use large pages if maximum heap is at least this big") \ 242 range(0, max_uintx) \ 243 \ 244 product(bool, ForceTimeHighResolution, false, \ 245 "Using high time resolution (for Win32 only)") \ 246 \ 247 develop(bool, TracePcPatching, false, \ 248 "Trace usage of frame::patch_pc") \ 249 \ 250 develop(bool, TraceRelocator, false, \ 251 "Trace the bytecode relocator") \ 252 \ 253 develop(bool, TraceLongCompiles, false, \ 254 "Print out every time compilation is longer than " \ 255 "a given threshold") \ 256 \ 257 diagnostic(bool, SafepointALot, false, \ 258 "Generate a lot of safepoints. This works with " \ 259 "GuaranteedSafepointInterval") \ 260 \ 261 diagnostic(bool, HandshakeALot, false, \ 262 "Generate a lot of handshakes. This works with " \ 263 "GuaranteedSafepointInterval") \ 264 \ 265 product_pd(bool, BackgroundCompilation, \ 266 "A thread requesting compilation is not blocked during " \ 267 "compilation") \ 268 \ 269 product(bool, PrintVMQWaitTime, false, \ 270 "(Deprecated) Print out the waiting time in VM operation queue") \ 271 \ 272 product(bool, MethodFlushing, true, \ 273 "Reclamation of zombie and not-entrant methods") \ 274 \ 275 develop(bool, VerifyStack, false, \ 276 "Verify stack of each thread when it is entering a runtime call") \ 277 \ 278 diagnostic(bool, ForceUnreachable, false, \ 279 "Make all non code cache addresses to be unreachable by " \ 280 "forcing use of 64bit literal fixups") \ 281 \ 282 notproduct(bool, StressDerivedPointers, false, \ 283 "Force scavenge when a derived pointer is detected on stack " \ 284 "after rtm call") \ 285 \ 286 develop(bool, TraceDerivedPointers, false, \ 287 "Trace traversal of derived pointers on stack") \ 288 \ 289 notproduct(bool, TraceCodeBlobStacks, false, \ 290 "Trace stack-walk of codeblobs") \ 291 \ 292 notproduct(bool, PrintRewrites, false, \ 293 "Print methods that are being rewritten") \ 294 \ 295 product(bool, UseInlineCaches, true, \ 296 "Use Inline Caches for virtual calls ") \ 297 \ 298 diagnostic(bool, InlineArrayCopy, true, \ 299 "Inline arraycopy native that is known to be part of " \ 300 "base library DLL") \ 301 \ 302 diagnostic(bool, InlineObjectHash, true, \ 303 "Inline Object::hashCode() native that is known to be part " \ 304 "of base library DLL") \ 305 \ 306 diagnostic(bool, InlineNatives, true, \ 307 "Inline natives that are known to be part of base library DLL") \ 308 \ 309 diagnostic(bool, InlineMathNatives, true, \ 310 "Inline SinD, CosD, etc.") \ 311 \ 312 diagnostic(bool, InlineClassNatives, true, \ 313 "Inline Class.isInstance, etc") \ 314 \ 315 diagnostic(bool, InlineThreadNatives, true, \ 316 "Inline Thread.currentThread, etc") \ 317 \ 318 diagnostic(bool, InlineUnsafeOps, true, \ 319 "Inline memory ops (native methods) from Unsafe") \ 320 \ 321 product(bool, CriticalJNINatives, true, \ 322 "Check for critical JNI entry points") \ 323 \ 324 notproduct(bool, StressCriticalJNINatives, false, \ 325 "Exercise register saving code in critical natives") \ 326 \ 327 diagnostic(bool, UseAESIntrinsics, false, \ 328 "Use intrinsics for AES versions of crypto") \ 329 \ 330 diagnostic(bool, UseAESCTRIntrinsics, false, \ 331 "Use intrinsics for the paralleled version of AES/CTR crypto") \ 332 \ 333 diagnostic(bool, UseSHA1Intrinsics, false, \ 334 "Use intrinsics for SHA-1 crypto hash function. " \ 335 "Requires that UseSHA is enabled.") \ 336 \ 337 diagnostic(bool, UseSHA256Intrinsics, false, \ 338 "Use intrinsics for SHA-224 and SHA-256 crypto hash functions. " \ 339 "Requires that UseSHA is enabled.") \ 340 \ 341 diagnostic(bool, UseSHA512Intrinsics, false, \ 342 "Use intrinsics for SHA-384 and SHA-512 crypto hash functions. " \ 343 "Requires that UseSHA is enabled.") \ 344 \ 345 diagnostic(bool, UseCRC32Intrinsics, false, \ 346 "use intrinsics for java.util.zip.CRC32") \ 347 \ 348 diagnostic(bool, UseCRC32CIntrinsics, false, \ 349 "use intrinsics for java.util.zip.CRC32C") \ 350 \ 351 diagnostic(bool, UseAdler32Intrinsics, false, \ 352 "use intrinsics for java.util.zip.Adler32") \ 353 \ 354 diagnostic(bool, UseVectorizedMismatchIntrinsic, false, \ 355 "Enables intrinsification of ArraysSupport.vectorizedMismatch()") \ 356 \ 357 diagnostic(ccstrlist, DisableIntrinsic, "", \ 358 "do not expand intrinsics whose (internal) names appear here") \ 359 \ 360 develop(bool, TraceCallFixup, false, \ 361 "Trace all call fixups") \ 362 \ 363 develop(bool, DeoptimizeALot, false, \ 364 "Deoptimize at every exit from the runtime system") \ 365 \ 366 notproduct(ccstrlist, DeoptimizeOnlyAt, "", \ 367 "A comma separated list of bcis to deoptimize at") \ 368 \ 369 develop(bool, DeoptimizeRandom, false, \ 370 "Deoptimize random frames on random exit from the runtime system")\ 371 \ 372 notproduct(bool, ZombieALot, false, \ 373 "Create zombies (non-entrant) at exit from the runtime system") \ 374 \ 375 notproduct(bool, WalkStackALot, false, \ 376 "Trace stack (no print) at every exit from the runtime system") \ 377 \ 378 product(bool, Debugging, false, \ 379 "Set when executing debug methods in debug.cpp " \ 380 "(to prevent triggering assertions)") \ 381 \ 382 notproduct(bool, VerifyLastFrame, false, \ 383 "Verify oops on last frame on entry to VM") \ 384 \ 385 product(bool, SafepointTimeout, false, \ 386 "Time out and warn or fail after SafepointTimeoutDelay " \ 387 "milliseconds if failed to reach safepoint") \ 388 \ 389 diagnostic(bool, AbortVMOnSafepointTimeout, false, \ 390 "Abort upon failure to reach safepoint (see SafepointTimeout)") \ 391 \ 392 diagnostic(bool, AbortVMOnVMOperationTimeout, false, \ 393 "Abort upon failure to complete VM operation promptly") \ 394 \ 395 diagnostic(intx, AbortVMOnVMOperationTimeoutDelay, 1000, \ 396 "Delay in milliseconds for option AbortVMOnVMOperationTimeout") \ 397 range(0, max_intx) \ 398 \ 399 /* 50 retries * (5 * current_retry_count) millis = ~6.375 seconds */ \ 400 /* typically, at most a few retries are needed */ \ 401 product(intx, SuspendRetryCount, 50, \ 402 "Maximum retry count for an external suspend request") \ 403 range(0, max_intx) \ 404 \ 405 product(intx, SuspendRetryDelay, 5, \ 406 "Milliseconds to delay per retry (* current_retry_count)") \ 407 range(0, max_intx) \ 408 \ 409 product(bool, AssertOnSuspendWaitFailure, false, \ 410 "Assert/Guarantee on external suspend wait failure") \ 411 \ 412 product(bool, TraceSuspendWaitFailures, false, \ 413 "Trace external suspend wait failures") \ 414 \ 415 product(bool, MaxFDLimit, true, \ 416 "Bump the number of file descriptors to maximum in Solaris") \ 417 \ 418 diagnostic(bool, LogEvents, true, \ 419 "Enable the various ring buffer event logs") \ 420 \ 421 diagnostic(uintx, LogEventsBufferEntries, 20, \ 422 "Number of ring buffer event logs") \ 423 range(1, NOT_LP64(1*K) LP64_ONLY(1*M)) \ 424 \ 425 diagnostic(bool, BytecodeVerificationRemote, true, \ 426 "Enable the Java bytecode verifier for remote classes") \ 427 \ 428 diagnostic(bool, BytecodeVerificationLocal, false, \ 429 "Enable the Java bytecode verifier for local classes") \ 430 \ 431 develop(bool, ForceFloatExceptions, trueInDebug, \ 432 "Force exceptions on FP stack under/overflow") \ 433 \ 434 develop(bool, VerifyStackAtCalls, false, \ 435 "Verify that the stack pointer is unchanged after calls") \ 436 \ 437 develop(bool, TraceJavaAssertions, false, \ 438 "Trace java language assertions") \ 439 \ 440 notproduct(bool, VerifyCodeCache, false, \ 441 "Verify code cache on memory allocation/deallocation") \ 442 \ 443 develop(bool, UseMallocOnly, false, \ 444 "Use only malloc/free for allocation (no resource area/arena)") \ 445 \ 446 develop(bool, ZapResourceArea, trueInDebug, \ 447 "Zap freed resource/arena space with 0xABABABAB") \ 448 \ 449 notproduct(bool, ZapVMHandleArea, trueInDebug, \ 450 "Zap freed VM handle space with 0xBCBCBCBC") \ 451 \ 452 notproduct(bool, ZapStackSegments, trueInDebug, \ 453 "Zap allocated/freed stack segments with 0xFADFADED") \ 454 \ 455 develop(bool, ZapUnusedHeapArea, trueInDebug, \ 456 "Zap unused heap space with 0xBAADBABE") \ 457 \ 458 develop(bool, CheckZapUnusedHeapArea, false, \ 459 "Check zapping of unused heap space") \ 460 \ 461 develop(bool, ZapFillerObjects, trueInDebug, \ 462 "Zap filler objects with 0xDEAFBABE") \ 463 \ 464 develop(bool, PrintVMMessages, true, \ 465 "Print VM messages on console") \ 466 \ 467 notproduct(uintx, ErrorHandlerTest, 0, \ 468 "If > 0, provokes an error after VM initialization; the value " \ 469 "determines which error to provoke. See test_error_handler() " \ 470 "in vmError.cpp.") \ 471 \ 472 notproduct(uintx, TestCrashInErrorHandler, 0, \ 473 "If > 0, provokes an error inside VM error handler (a secondary " \ 474 "crash). see test_error_handler() in vmError.cpp") \ 475 \ 476 notproduct(bool, TestSafeFetchInErrorHandler, false, \ 477 "If true, tests SafeFetch inside error handler.") \ 478 \ 479 notproduct(bool, TestUnresponsiveErrorHandler, false, \ 480 "If true, simulates an unresponsive error handler.") \ 481 \ 482 develop(bool, Verbose, false, \ 483 "Print additional debugging information from other modes") \ 484 \ 485 develop(bool, PrintMiscellaneous, false, \ 486 "Print uncategorized debugging information (requires +Verbose)") \ 487 \ 488 develop(bool, WizardMode, false, \ 489 "Print much more debugging information") \ 490 \ 491 product(bool, ShowMessageBoxOnError, false, \ 492 "Keep process alive on VM fatal error") \ 493 \ 494 product(bool, CreateCoredumpOnCrash, true, \ 495 "Create core/mini dump on VM fatal error") \ 496 \ 497 product(uint64_t, ErrorLogTimeout, 2 * 60, \ 498 "Timeout, in seconds, to limit the time spent on writing an " \ 499 "error log in case of a crash.") \ 500 range(0, (uint64_t)max_jlong/1000) \ 501 \ 502 product_pd(bool, UseOSErrorReporting, \ 503 "Let VM fatal error propagate to the OS (ie. WER on Windows)") \ 504 \ 505 product(bool, SuppressFatalErrorMessage, false, \ 506 "Report NO fatal error message (avoid deadlock)") \ 507 \ 508 product(ccstrlist, OnError, "", \ 509 "Run user-defined commands on fatal error; see VMError.cpp " \ 510 "for examples") \ 511 \ 512 product(ccstrlist, OnOutOfMemoryError, "", \ 513 "Run user-defined commands on first java.lang.OutOfMemoryError") \ 514 \ 515 manageable(bool, HeapDumpBeforeFullGC, false, \ 516 "Dump heap to file before any major stop-the-world GC") \ 517 \ 518 manageable(bool, HeapDumpAfterFullGC, false, \ 519 "Dump heap to file after any major stop-the-world GC") \ 520 \ 521 manageable(bool, HeapDumpOnOutOfMemoryError, false, \ 522 "Dump heap to file when java.lang.OutOfMemoryError is thrown") \ 523 \ 524 manageable(ccstr, HeapDumpPath, NULL, \ 525 "When HeapDumpOnOutOfMemoryError is on, the path (filename or " \ 526 "directory) of the dump file (defaults to java_pid<pid>.hprof " \ 527 "in the working directory)") \ 528 \ 529 develop(bool, BreakAtWarning, false, \ 530 "Execute breakpoint upon encountering VM warning") \ 531 \ 532 product(ccstr, NativeMemoryTracking, "off", \ 533 "Native memory tracking options") \ 534 \ 535 diagnostic(bool, PrintNMTStatistics, false, \ 536 "Print native memory tracking summary data if it is on") \ 537 \ 538 diagnostic(bool, LogCompilation, false, \ 539 "Log compilation activity in detail to LogFile") \ 540 \ 541 product(bool, PrintCompilation, false, \ 542 "Print compilations") \ 543 \ 544 product(bool, PrintExtendedThreadInfo, false, \ 545 "Print more information in thread dump") \ 546 \ 547 diagnostic(intx, ScavengeRootsInCode, 2, \ 548 "0: do not allow scavengable oops in the code cache; " \ 549 "1: allow scavenging from the code cache; " \ 550 "2: emit as many constants as the compiler can see") \ 551 range(0, 2) \ 552 \ 553 product(bool, AlwaysRestoreFPU, false, \ 554 "Restore the FPU control word after every JNI call (expensive)") \ 555 \ 556 diagnostic(bool, PrintCompilation2, false, \ 557 "Print additional statistics per compilation") \ 558 \ 559 diagnostic(bool, PrintAdapterHandlers, false, \ 560 "Print code generated for i2c/c2i adapters") \ 561 \ 562 diagnostic(bool, VerifyAdapterCalls, trueInDebug, \ 563 "Verify that i2c/c2i adapters are called properly") \ 564 \ 565 develop(bool, VerifyAdapterSharing, false, \ 566 "Verify that the code for shared adapters is the equivalent") \ 567 \ 568 diagnostic(bool, PrintAssembly, false, \ 569 "Print assembly code (using external disassembler.so)") \ 570 \ 571 diagnostic(ccstr, PrintAssemblyOptions, NULL, \ 572 "Print options string passed to disassembler.so") \ 573 \ 574 notproduct(bool, PrintNMethodStatistics, false, \ 575 "Print a summary statistic for the generated nmethods") \ 576 \ 577 diagnostic(bool, PrintNMethods, false, \ 578 "Print assembly code for nmethods when generated") \ 579 \ 580 diagnostic(bool, PrintNativeNMethods, false, \ 581 "Print assembly code for native nmethods when generated") \ 582 \ 583 develop(bool, PrintDebugInfo, false, \ 584 "Print debug information for all nmethods when generated") \ 585 \ 586 develop(bool, PrintRelocations, false, \ 587 "Print relocation information for all nmethods when generated") \ 588 \ 589 develop(bool, PrintDependencies, false, \ 590 "Print dependency information for all nmethods when generated") \ 591 \ 592 develop(bool, PrintExceptionHandlers, false, \ 593 "Print exception handler tables for all nmethods when generated") \ 594 \ 595 develop(bool, StressCompiledExceptionHandlers, false, \ 596 "Exercise compiled exception handlers") \ 597 \ 598 develop(bool, InterceptOSException, false, \ 599 "Start debugger when an implicit OS (e.g. NULL) " \ 600 "exception happens") \ 601 \ 602 product(bool, PrintCodeCache, false, \ 603 "Print the code cache memory usage when exiting") \ 604 \ 605 develop(bool, PrintCodeCache2, false, \ 606 "Print detailed usage information on the code cache when exiting")\ 607 \ 608 product(bool, PrintCodeCacheOnCompilation, false, \ 609 "Print the code cache memory usage each time a method is " \ 610 "compiled") \ 611 \ 612 diagnostic(bool, PrintCodeHeapAnalytics, false, \ 613 "Print code heap usage statistics on exit and on full condition") \ 614 \ 615 diagnostic(bool, PrintStubCode, false, \ 616 "Print generated stub code") \ 617 \ 618 product(bool, StackTraceInThrowable, true, \ 619 "Collect backtrace in throwable when exception happens") \ 620 \ 621 product(bool, OmitStackTraceInFastThrow, true, \ 622 "Omit backtraces for some 'hot' exceptions in optimized code") \ 623 \ 624 manageable(bool, ShowCodeDetailsInExceptionMessages, false, \ 625 "Show exception messages from RuntimeExceptions that contain " \ 626 "snippets of the failing code. Disable this to improve privacy.") \ 627 \ 628 product(bool, PrintWarnings, true, \ 629 "Print JVM warnings to output stream") \ 630 \ 631 notproduct(uintx, WarnOnStalledSpinLock, 0, \ 632 "Print warnings for stalled SpinLocks") \ 633 \ 634 product(bool, RegisterFinalizersAtInit, true, \ 635 "Register finalizable objects at end of Object.<init> or " \ 636 "after allocation") \ 637 \ 638 develop(bool, RegisterReferences, true, \ 639 "Tell whether the VM should register soft/weak/final/phantom " \ 640 "references") \ 641 \ 642 develop(bool, IgnoreRewrites, false, \ 643 "Suppress rewrites of bytecodes in the oopmap generator. " \ 644 "This is unsafe!") \ 645 \ 646 develop(bool, PrintCodeCacheExtension, false, \ 647 "Print extension of code cache") \ 648 \ 649 develop(bool, UsePrivilegedStack, true, \ 650 "Enable the security JVM functions") \ 651 \ 652 develop(bool, ProtectionDomainVerification, true, \ 653 "Verify protection domain before resolution in system dictionary")\ 654 \ 655 product(bool, ClassUnloading, true, \ 656 "Do unloading of classes") \ 657 \ 658 product(bool, ClassUnloadingWithConcurrentMark, true, \ 659 "Do unloading of classes with a concurrent marking cycle") \ 660 \ 661 develop(bool, DisableStartThread, false, \ 662 "Disable starting of additional Java threads " \ 663 "(for debugging only)") \ 664 \ 665 develop(bool, MemProfiling, false, \ 666 "Write memory usage profiling to log file") \ 667 \ 668 notproduct(bool, PrintSystemDictionaryAtExit, false, \ 669 "Print the system dictionary at exit") \ 670 \ 671 diagnostic(bool, DynamicallyResizeSystemDictionaries, true, \ 672 "Dynamically resize system dictionaries as needed") \ 673 \ 674 product(bool, AlwaysLockClassLoader, false, \ 675 "Require the VM to acquire the class loader lock before calling " \ 676 "loadClass() even for class loaders registering " \ 677 "as parallel capable") \ 678 \ 679 product(bool, AllowParallelDefineClass, false, \ 680 "Allow parallel defineClass requests for class loaders " \ 681 "registering as parallel capable") \ 682 \ 683 product_pd(bool, DontYieldALot, \ 684 "Throw away obvious excess yield calls") \ 685 \ 686 develop(bool, UseDetachedThreads, true, \ 687 "Use detached threads that are recycled upon termination " \ 688 "(for Solaris only)") \ 689 \ 690 experimental(bool, DisablePrimordialThreadGuardPages, false, \ 691 "Disable the use of stack guard pages if the JVM is loaded " \ 692 "on the primordial process thread") \ 693 \ 694 product(bool, UseLWPSynchronization, true, \ 695 "Use LWP-based instead of libthread-based synchronization " \ 696 "(SPARC only)") \ 697 \ 698 product(intx, MonitorBound, 0, "(Deprecated) Bound Monitor population") \ 699 range(0, max_jint) \ 700 \ 701 diagnostic(bool, AsyncDeflateIdleMonitors, true, \ 702 "Deflate idle monitors using the ServiceThread.") \ 703 \ 704 /* notice: the max range value here is max_jint, not max_intx */ \ 705 /* because of overflow issue */ \ 706 diagnostic(intx, AsyncDeflationInterval, 250, \ 707 "Async deflate idle monitors every so many milliseconds when " \ 708 "MonitorUsedDeflationThreshold is exceeded (0 is off).") \ 709 range(0, max_jint) \ 710 \ 711 experimental(intx, MonitorUsedDeflationThreshold, 90, \ 712 "Percentage of used monitors before triggering deflation (0 is " \ 713 "off). The check is performed on GuaranteedSafepointInterval " \ 714 "or AsyncDeflateInterval.") \ 715 range(0, 100) \ 716 \ 717 experimental(intx, hashCode, 5, \ 718 "(Unstable) select hashCode generation algorithm") \ 719 \ 720 product(bool, FilterSpuriousWakeups, true, \ 721 "When true prevents OS-level spurious, or premature, wakeups " \ 722 "from Object.wait (Ignored for Windows)") \ 723 \ 724 develop(bool, UsePthreads, false, \ 725 "Use pthread-based instead of libthread-based synchronization " \ 726 "(SPARC only)") \ 727 \ 728 product(bool, ReduceSignalUsage, false, \ 729 "Reduce the use of OS signals in Java and/or the VM") \ 730 \ 731 develop(bool, LoadLineNumberTables, true, \ 732 "Tell whether the class file parser loads line number tables") \ 733 \ 734 develop(bool, LoadLocalVariableTables, true, \ 735 "Tell whether the class file parser loads local variable tables") \ 736 \ 737 develop(bool, LoadLocalVariableTypeTables, true, \ 738 "Tell whether the class file parser loads local variable type" \ 739 "tables") \ 740 \ 741 product(bool, AllowUserSignalHandlers, false, \ 742 "Do not complain if the application installs signal handlers " \ 743 "(Solaris & Linux only)") \ 744 \ 745 product(bool, UseSignalChaining, true, \ 746 "Use signal-chaining to invoke signal handlers installed " \ 747 "by the application (Solaris & Linux only)") \ 748 \ 749 product(bool, RestoreMXCSROnJNICalls, false, \ 750 "Restore MXCSR when returning from JNI calls") \ 751 \ 752 product(bool, CheckJNICalls, false, \ 753 "Verify all arguments to JNI calls") \ 754 \ 755 product(bool, UseFastJNIAccessors, true, \ 756 "Use optimized versions of Get<Primitive>Field") \ 757 \ 758 product(intx, MaxJNILocalCapacity, 65536, \ 759 "Maximum allowable local JNI handle capacity to " \ 760 "EnsureLocalCapacity() and PushLocalFrame(), " \ 761 "where <= 0 is unlimited, default: 65536") \ 762 range(min_intx, max_intx) \ 763 \ 764 product(bool, EagerXrunInit, false, \ 765 "Eagerly initialize -Xrun libraries; allows startup profiling, " \ 766 "but not all -Xrun libraries may support the state of the VM " \ 767 "at this time") \ 768 \ 769 product(bool, PreserveAllAnnotations, false, \ 770 "Preserve RuntimeInvisibleAnnotations as well " \ 771 "as RuntimeVisibleAnnotations") \ 772 \ 773 develop(uintx, PreallocatedOutOfMemoryErrorCount, 4, \ 774 "Number of OutOfMemoryErrors preallocated with backtrace") \ 775 \ 776 product(bool, UseXMMForArrayCopy, false, \ 777 "Use SSE2 MOVQ instruction for Arraycopy") \ 778 \ 779 notproduct(bool, PrintFieldLayout, false, \ 780 "Print field layout for each class") \ 781 \ 782 /* Need to limit the extent of the padding to reasonable size. */\ 783 /* 8K is well beyond the reasonable HW cache line size, even with */\ 784 /* aggressive prefetching, while still leaving the room for segregating */\ 785 /* among the distinct pages. */\ 786 product(intx, ContendedPaddingWidth, 128, \ 787 "How many bytes to pad the fields/classes marked @Contended with")\ 788 range(0, 8192) \ 789 constraint(ContendedPaddingWidthConstraintFunc,AfterErgo) \ 790 \ 791 product(bool, EnableContended, true, \ 792 "Enable @Contended annotation support") \ 793 \ 794 product(bool, RestrictContended, true, \ 795 "Restrict @Contended to trusted classes") \ 796 \ 797 product(bool, UseBiasedLocking, true, \ 798 "Enable biased locking in JVM") \ 799 \ 800 product(intx, BiasedLockingStartupDelay, 0, \ 801 "Number of milliseconds to wait before enabling biased locking") \ 802 range(0, (intx)(max_jint-(max_jint%PeriodicTask::interval_gran))) \ 803 constraint(BiasedLockingStartupDelayFunc,AfterErgo) \ 804 \ 805 diagnostic(bool, PrintBiasedLockingStatistics, false, \ 806 "Print statistics of biased locking in JVM") \ 807 \ 808 product(intx, BiasedLockingBulkRebiasThreshold, 20, \ 809 "Threshold of number of revocations per type to try to " \ 810 "rebias all objects in the heap of that type") \ 811 range(0, max_intx) \ 812 constraint(BiasedLockingBulkRebiasThresholdFunc,AfterErgo) \ 813 \ 814 product(intx, BiasedLockingBulkRevokeThreshold, 40, \ 815 "Threshold of number of revocations per type to permanently " \ 816 "revoke biases of all objects in the heap of that type") \ 817 range(0, max_intx) \ 818 constraint(BiasedLockingBulkRevokeThresholdFunc,AfterErgo) \ 819 \ 820 product(intx, BiasedLockingDecayTime, 25000, \ 821 "Decay time (in milliseconds) to re-enable bulk rebiasing of a " \ 822 "type after previous bulk rebias") \ 823 range(500, max_intx) \ 824 constraint(BiasedLockingDecayTimeFunc,AfterErgo) \ 825 \ 826 product(bool, ExitOnOutOfMemoryError, false, \ 827 "JVM exits on the first occurrence of an out-of-memory error") \ 828 \ 829 product(bool, CrashOnOutOfMemoryError, false, \ 830 "JVM aborts, producing an error log and core/mini dump, on the " \ 831 "first occurrence of an out-of-memory error") \ 832 \ 833 /* tracing */ \ 834 \ 835 develop(bool, StressRewriter, false, \ 836 "Stress linktime bytecode rewriting") \ 837 \ 838 product(ccstr, TraceJVMTI, NULL, \ 839 "Trace flags for JVMTI functions and events") \ 840 \ 841 /* This option can change an EMCP method into an obsolete method. */ \ 842 /* This can affect tests that except specific methods to be EMCP. */ \ 843 /* This option should be used with caution. */ \ 844 product(bool, StressLdcRewrite, false, \ 845 "Force ldc -> ldc_w rewrite during RedefineClasses") \ 846 \ 847 /* change to false by default sometime after Mustang */ \ 848 product(bool, VerifyMergedCPBytecodes, true, \ 849 "Verify bytecodes after RedefineClasses constant pool merging") \ 850 \ 851 product(bool, AllowRedefinitionToAddDeleteMethods, false, \ 852 "(Deprecated) Allow redefinition to add and delete private " \ 853 "static or final methods for compatibility with old releases") \ 854 \ 855 develop(bool, TraceBytecodes, false, \ 856 "Trace bytecode execution") \ 857 \ 858 develop(bool, TraceICs, false, \ 859 "Trace inline cache changes") \ 860 \ 861 notproduct(bool, TraceInvocationCounterOverflow, false, \ 862 "Trace method invocation counter overflow") \ 863 \ 864 develop(bool, TraceInlineCacheClearing, false, \ 865 "Trace clearing of inline caches in nmethods") \ 866 \ 867 develop(bool, TraceDependencies, false, \ 868 "Trace dependencies") \ 869 \ 870 develop(bool, VerifyDependencies, trueInDebug, \ 871 "Exercise and verify the compilation dependency mechanism") \ 872 \ 873 develop(bool, TraceNewOopMapGeneration, false, \ 874 "Trace OopMapGeneration") \ 875 \ 876 develop(bool, TraceNewOopMapGenerationDetailed, false, \ 877 "Trace OopMapGeneration: print detailed cell states") \ 878 \ 879 develop(bool, TimeOopMap, false, \ 880 "Time calls to GenerateOopMap::compute_map() in sum") \ 881 \ 882 develop(bool, TimeOopMap2, false, \ 883 "Time calls to GenerateOopMap::compute_map() individually") \ 884 \ 885 develop(bool, TraceOopMapRewrites, false, \ 886 "Trace rewriting of method oops during oop map generation") \ 887 \ 888 develop(bool, TraceICBuffer, false, \ 889 "Trace usage of IC buffer") \ 890 \ 891 develop(bool, TraceCompiledIC, false, \ 892 "Trace changes of compiled IC") \ 893 \ 894 develop(bool, FLSVerifyDictionary, false, \ 895 "Do lots of (expensive) FLS dictionary verification") \ 896 \ 897 \ 898 notproduct(bool, CheckMemoryInitialization, false, \ 899 "Check memory initialization") \ 900 \ 901 product(uintx, ProcessDistributionStride, 4, \ 902 "Stride through processors when distributing processes") \ 903 range(0, max_juint) \ 904 \ 905 develop(bool, TraceFinalizerRegistration, false, \ 906 "Trace registration of final references") \ 907 \ 908 product(bool, IgnoreEmptyClassPaths, false, \ 909 "Ignore empty path elements in -classpath") \ 910 \ 911 product(size_t, InitialBootClassLoaderMetaspaceSize, \ 912 NOT_LP64(2200*K) LP64_ONLY(4*M), \ 913 "Initial size of the boot class loader data metaspace") \ 914 range(30*K, max_uintx/BytesPerWord) \ 915 constraint(InitialBootClassLoaderMetaspaceSizeConstraintFunc, AfterErgo)\ 916 \ 917 product(bool, PrintHeapAtSIGBREAK, true, \ 918 "Print heap layout in response to SIGBREAK") \ 919 \ 920 manageable(bool, PrintClassHistogram, false, \ 921 "Print a histogram of class instances") \ 922 \ 923 experimental(double, ObjectCountCutOffPercent, 0.5, \ 924 "The percentage of the used heap that the instances of a class " \ 925 "must occupy for the class to generate a trace event") \ 926 range(0.0, 100.0) \ 927 \ 928 /* JVMTI heap profiling */ \ 929 \ 930 diagnostic(bool, TraceJVMTIObjectTagging, false, \ 931 "Trace JVMTI object tagging calls") \ 932 \ 933 diagnostic(bool, VerifyBeforeIteration, false, \ 934 "Verify memory system before JVMTI iteration") \ 935 \ 936 /* compiler interface */ \ 937 \ 938 develop(bool, CIPrintCompilerName, false, \ 939 "when CIPrint is active, print the name of the active compiler") \ 940 \ 941 diagnostic(bool, CIPrintCompileQueue, false, \ 942 "display the contents of the compile queue whenever a " \ 943 "compilation is enqueued") \ 944 \ 945 develop(bool, CIPrintRequests, false, \ 946 "display every request for compilation") \ 947 \ 948 product(bool, CITime, false, \ 949 "collect timing information for compilation") \ 950 \ 951 develop(bool, CITimeVerbose, false, \ 952 "be more verbose in compilation timings") \ 953 \ 954 develop(bool, CITimeEach, false, \ 955 "display timing information after each successful compilation") \ 956 \ 957 develop(bool, CICountOSR, false, \ 958 "use a separate counter when assigning ids to osr compilations") \ 959 \ 960 develop(bool, CICompileNatives, true, \ 961 "compile native methods if supported by the compiler") \ 962 \ 963 develop_pd(bool, CICompileOSR, \ 964 "compile on stack replacement methods if supported by the " \ 965 "compiler") \ 966 \ 967 develop(bool, CIPrintMethodCodes, false, \ 968 "print method bytecodes of the compiled code") \ 969 \ 970 develop(bool, CIPrintTypeFlow, false, \ 971 "print the results of ciTypeFlow analysis") \ 972 \ 973 develop(bool, CITraceTypeFlow, false, \ 974 "detailed per-bytecode tracing of ciTypeFlow analysis") \ 975 \ 976 develop(intx, OSROnlyBCI, -1, \ 977 "OSR only at this bci. Negative values mean exclude that bci") \ 978 \ 979 /* compiler */ \ 980 \ 981 /* notice: the max range value here is max_jint, not max_intx */ \ 982 /* because of overflow issue */ \ 983 product(intx, CICompilerCount, CI_COMPILER_COUNT, \ 984 "Number of compiler threads to run") \ 985 range(0, max_jint) \ 986 constraint(CICompilerCountConstraintFunc, AfterErgo) \ 987 \ 988 product(bool, UseDynamicNumberOfCompilerThreads, true, \ 989 "Dynamically choose the number of parallel compiler threads") \ 990 \ 991 diagnostic(bool, ReduceNumberOfCompilerThreads, true, \ 992 "Reduce the number of parallel compiler threads when they " \ 993 "are not used") \ 994 \ 995 diagnostic(bool, TraceCompilerThreads, false, \ 996 "Trace creation and removal of compiler threads") \ 997 \ 998 develop(bool, InjectCompilerCreationFailure, false, \ 999 "Inject thread creation failures for " \ 1000 "UseDynamicNumberOfCompilerThreads") \ 1001 \ 1002 develop(bool, UseStackBanging, true, \ 1003 "use stack banging for stack overflow checks (required for " \ 1004 "proper StackOverflow handling; disable only to measure cost " \ 1005 "of stackbanging)") \ 1006 \ 1007 develop(bool, GenerateSynchronizationCode, true, \ 1008 "generate locking/unlocking code for synchronized methods and " \ 1009 "monitors") \ 1010 \ 1011 develop(bool, GenerateRangeChecks, true, \ 1012 "Generate range checks for array accesses") \ 1013 \ 1014 diagnostic_pd(bool, ImplicitNullChecks, \ 1015 "Generate code for implicit null checks") \ 1016 \ 1017 product_pd(bool, TrapBasedNullChecks, \ 1018 "Generate code for null checks that uses a cmp and trap " \ 1019 "instruction raising SIGTRAP. This is only used if an access to" \ 1020 "null (+offset) will not raise a SIGSEGV, i.e.," \ 1021 "ImplicitNullChecks don't work (PPC64).") \ 1022 \ 1023 diagnostic(bool, EnableThreadSMRExtraValidityChecks, true, \ 1024 "Enable Thread SMR extra validity checks") \ 1025 \ 1026 diagnostic(bool, EnableThreadSMRStatistics, trueInDebug, \ 1027 "Enable Thread SMR Statistics") \ 1028 \ 1029 product(bool, UseNotificationThread, true, \ 1030 "Use Notification Thread") \ 1031 \ 1032 product(bool, Inline, true, \ 1033 "Enable inlining") \ 1034 \ 1035 product(bool, ClipInlining, true, \ 1036 "Clip inlining if aggregate method exceeds DesiredMethodLimit") \ 1037 \ 1038 develop(bool, UseCHA, true, \ 1039 "Enable CHA") \ 1040 \ 1041 product(bool, UseTypeProfile, true, \ 1042 "Check interpreter profile for historically monomorphic calls") \ 1043 \ 1044 diagnostic(bool, PrintInlining, false, \ 1045 "Print inlining optimizations") \ 1046 \ 1047 product(bool, UsePopCountInstruction, false, \ 1048 "Use population count instruction") \ 1049 \ 1050 develop(bool, EagerInitialization, false, \ 1051 "Eagerly initialize classes if possible") \ 1052 \ 1053 diagnostic(bool, LogTouchedMethods, false, \ 1054 "Log methods which have been ever touched in runtime") \ 1055 \ 1056 diagnostic(bool, PrintTouchedMethodsAtExit, false, \ 1057 "Print all methods that have been ever touched in runtime") \ 1058 \ 1059 develop(bool, TraceMethodReplacement, false, \ 1060 "Print when methods are replaced do to recompilation") \ 1061 \ 1062 develop(bool, PrintMethodFlushing, false, \ 1063 "Print the nmethods being flushed") \ 1064 \ 1065 diagnostic(bool, PrintMethodFlushingStatistics, false, \ 1066 "print statistics about method flushing") \ 1067 \ 1068 diagnostic(intx, HotMethodDetectionLimit, 100000, \ 1069 "Number of compiled code invocations after which " \ 1070 "the method is considered as hot by the flusher") \ 1071 range(1, max_jint) \ 1072 \ 1073 diagnostic(intx, MinPassesBeforeFlush, 10, \ 1074 "Minimum number of sweeper passes before an nmethod " \ 1075 "can be flushed") \ 1076 range(0, max_intx) \ 1077 \ 1078 product(bool, UseCodeAging, true, \ 1079 "Insert counter to detect warm methods") \ 1080 \ 1081 diagnostic(bool, StressCodeAging, false, \ 1082 "Start with counters compiled in") \ 1083 \ 1084 develop(bool, StressCodeBuffers, false, \ 1085 "Exercise code buffer expansion and other rare state changes") \ 1086 \ 1087 diagnostic(bool, DebugNonSafepoints, trueInDebug, \ 1088 "Generate extra debugging information for non-safepoints in " \ 1089 "nmethods") \ 1090 \ 1091 product(bool, PrintVMOptions, false, \ 1092 "Print flags that appeared on the command line") \ 1093 \ 1094 product(bool, IgnoreUnrecognizedVMOptions, false, \ 1095 "Ignore unrecognized VM options") \ 1096 \ 1097 product(bool, PrintCommandLineFlags, false, \ 1098 "Print flags specified on command line or set by ergonomics") \ 1099 \ 1100 product(bool, PrintFlagsInitial, false, \ 1101 "Print all VM flags before argument processing and exit VM") \ 1102 \ 1103 product(bool, PrintFlagsFinal, false, \ 1104 "Print all VM flags after argument and ergonomic processing") \ 1105 \ 1106 notproduct(bool, PrintFlagsWithComments, false, \ 1107 "Print all VM flags with default values and descriptions and " \ 1108 "exit") \ 1109 \ 1110 product(bool, PrintFlagsRanges, false, \ 1111 "Print VM flags and their ranges") \ 1112 \ 1113 diagnostic(bool, SerializeVMOutput, true, \ 1114 "Use a mutex to serialize output to tty and LogFile") \ 1115 \ 1116 diagnostic(bool, DisplayVMOutput, true, \ 1117 "Display all VM output on the tty, independently of LogVMOutput") \ 1118 \ 1119 diagnostic(bool, LogVMOutput, false, \ 1120 "Save VM output to LogFile") \ 1121 \ 1122 diagnostic(ccstr, LogFile, NULL, \ 1123 "If LogVMOutput or LogCompilation is on, save VM output to " \ 1124 "this file [default: ./hotspot_pid%p.log] (%p replaced with pid)")\ 1125 \ 1126 product(ccstr, ErrorFile, NULL, \ 1127 "If an error occurs, save the error data to this file " \ 1128 "[default: ./hs_err_pid%p.log] (%p replaced with pid)") \ 1129 \ 1130 product(bool, ExtensiveErrorReports, \ 1131 PRODUCT_ONLY(false) NOT_PRODUCT(true), \ 1132 "Error reports are more extensive.") \ 1133 \ 1134 product(bool, DisplayVMOutputToStderr, false, \ 1135 "If DisplayVMOutput is true, display all VM output to stderr") \ 1136 \ 1137 product(bool, DisplayVMOutputToStdout, false, \ 1138 "If DisplayVMOutput is true, display all VM output to stdout") \ 1139 \ 1140 product(bool, ErrorFileToStderr, false, \ 1141 "If true, error data is printed to stderr instead of a file") \ 1142 \ 1143 product(bool, ErrorFileToStdout, false, \ 1144 "If true, error data is printed to stdout instead of a file") \ 1145 \ 1146 product(bool, UseHeavyMonitors, false, \ 1147 "use heavyweight instead of lightweight Java monitors") \ 1148 \ 1149 product(bool, PrintStringTableStatistics, false, \ 1150 "print statistics about the StringTable and SymbolTable") \ 1151 \ 1152 diagnostic(bool, VerifyStringTableAtExit, false, \ 1153 "verify StringTable contents at exit") \ 1154 \ 1155 notproduct(bool, PrintSymbolTableSizeHistogram, false, \ 1156 "print histogram of the symbol table") \ 1157 \ 1158 notproduct(bool, ExitVMOnVerifyError, false, \ 1159 "standard exit from VM if bytecode verify error " \ 1160 "(only in debug mode)") \ 1161 \ 1162 diagnostic(ccstr, AbortVMOnException, NULL, \ 1163 "Call fatal if this exception is thrown. Example: " \ 1164 "java -XX:AbortVMOnException=java.lang.NullPointerException Foo") \ 1165 \ 1166 diagnostic(ccstr, AbortVMOnExceptionMessage, NULL, \ 1167 "Call fatal if the exception pointed by AbortVMOnException " \ 1168 "has this message") \ 1169 \ 1170 develop(bool, DebugVtables, false, \ 1171 "add debugging code to vtable dispatch") \ 1172 \ 1173 notproduct(bool, PrintVtableStats, false, \ 1174 "print vtables stats at end of run") \ 1175 \ 1176 develop(bool, TraceCreateZombies, false, \ 1177 "trace creation of zombie nmethods") \ 1178 \ 1179 product(bool, RangeCheckElimination, true, \ 1180 "Eliminate range checks") \ 1181 \ 1182 develop_pd(bool, UncommonNullCast, \ 1183 "track occurrences of null in casts; adjust compiler tactics") \ 1184 \ 1185 develop(bool, TypeProfileCasts, true, \ 1186 "treat casts like calls for purposes of type profiling") \ 1187 \ 1188 develop(bool, TraceLivenessGen, false, \ 1189 "Trace the generation of liveness analysis information") \ 1190 \ 1191 notproduct(bool, TraceLivenessQuery, false, \ 1192 "Trace queries of liveness analysis information") \ 1193 \ 1194 notproduct(bool, CollectIndexSetStatistics, false, \ 1195 "Collect information about IndexSets") \ 1196 \ 1197 develop(bool, UseLoopSafepoints, true, \ 1198 "Generate Safepoint nodes in every loop") \ 1199 \ 1200 develop(intx, FastAllocateSizeLimit, 128*K, \ 1201 /* Note: This value is zero mod 1<<13 for a cheap sparc set. */ \ 1202 "Inline allocations larger than this in doublewords must go slow")\ 1203 \ 1204 product_pd(bool, CompactStrings, \ 1205 "Enable Strings to use single byte chars in backing store") \ 1206 \ 1207 product_pd(uintx, TypeProfileLevel, \ 1208 "=XYZ, with Z: Type profiling of arguments at call; " \ 1209 "Y: Type profiling of return value at call; " \ 1210 "X: Type profiling of parameters to methods; " \ 1211 "X, Y and Z in 0=off ; 1=jsr292 only; 2=all methods") \ 1212 constraint(TypeProfileLevelConstraintFunc, AfterErgo) \ 1213 \ 1214 product(intx, TypeProfileArgsLimit, 2, \ 1215 "max number of call arguments to consider for type profiling") \ 1216 range(0, 16) \ 1217 \ 1218 product(intx, TypeProfileParmsLimit, 2, \ 1219 "max number of incoming parameters to consider for type profiling"\ 1220 ", -1 for all") \ 1221 range(-1, 64) \ 1222 \ 1223 /* statistics */ \ 1224 develop(bool, CountCompiledCalls, false, \ 1225 "Count method invocations") \ 1226 \ 1227 notproduct(bool, CountRuntimeCalls, false, \ 1228 "Count VM runtime calls") \ 1229 \ 1230 develop(bool, CountJNICalls, false, \ 1231 "Count jni method invocations") \ 1232 \ 1233 notproduct(bool, CountJVMCalls, false, \ 1234 "Count jvm method invocations") \ 1235 \ 1236 notproduct(bool, CountRemovableExceptions, false, \ 1237 "Count exceptions that could be replaced by branches due to " \ 1238 "inlining") \ 1239 \ 1240 notproduct(bool, ICMissHistogram, false, \ 1241 "Produce histogram of IC misses") \ 1242 \ 1243 /* interpreter */ \ 1244 product_pd(bool, RewriteBytecodes, \ 1245 "Allow rewriting of bytecodes (bytecodes are not immutable)") \ 1246 \ 1247 product_pd(bool, RewriteFrequentPairs, \ 1248 "Rewrite frequently used bytecode pairs into a single bytecode") \ 1249 \ 1250 diagnostic(bool, PrintInterpreter, false, \ 1251 "Print the generated interpreter code") \ 1252 \ 1253 product(bool, UseInterpreter, true, \ 1254 "Use interpreter for non-compiled methods") \ 1255 \ 1256 develop(bool, UseFastSignatureHandlers, true, \ 1257 "Use fast signature handlers for native calls") \ 1258 \ 1259 product(bool, UseLoopCounter, true, \ 1260 "Increment invocation counter on backward branch") \ 1261 \ 1262 product_pd(bool, UseOnStackReplacement, \ 1263 "Use on stack replacement, calls runtime if invoc. counter " \ 1264 "overflows in loop") \ 1265 \ 1266 notproduct(bool, TraceOnStackReplacement, false, \ 1267 "Trace on stack replacement") \ 1268 \ 1269 product_pd(bool, PreferInterpreterNativeStubs, \ 1270 "Use always interpreter stubs for native methods invoked via " \ 1271 "interpreter") \ 1272 \ 1273 develop(bool, CountBytecodes, false, \ 1274 "Count number of bytecodes executed") \ 1275 \ 1276 develop(bool, PrintBytecodeHistogram, false, \ 1277 "Print histogram of the executed bytecodes") \ 1278 \ 1279 develop(bool, PrintBytecodePairHistogram, false, \ 1280 "Print histogram of the executed bytecode pairs") \ 1281 \ 1282 diagnostic(bool, PrintSignatureHandlers, false, \ 1283 "Print code generated for native method signature handlers") \ 1284 \ 1285 develop(bool, VerifyOops, false, \ 1286 "Do plausibility checks for oops") \ 1287 \ 1288 develop(bool, CheckUnhandledOops, false, \ 1289 "Check for unhandled oops in VM code") \ 1290 \ 1291 develop(bool, VerifyJNIFields, trueInDebug, \ 1292 "Verify jfieldIDs for instance fields") \ 1293 \ 1294 notproduct(bool, VerifyJNIEnvThread, false, \ 1295 "Verify JNIEnv.thread == Thread::current() when entering VM " \ 1296 "from JNI") \ 1297 \ 1298 develop(bool, VerifyFPU, false, \ 1299 "Verify FPU state (check for NaN's, etc.)") \ 1300 \ 1301 develop(bool, VerifyThread, false, \ 1302 "Watch the thread register for corruption (SPARC only)") \ 1303 \ 1304 develop(bool, VerifyActivationFrameSize, false, \ 1305 "Verify that activation frame didn't become smaller than its " \ 1306 "minimal size") \ 1307 \ 1308 develop(bool, TraceFrequencyInlining, false, \ 1309 "Trace frequency based inlining") \ 1310 \ 1311 develop_pd(bool, InlineIntrinsics, \ 1312 "Inline intrinsics that can be statically resolved") \ 1313 \ 1314 product_pd(bool, ProfileInterpreter, \ 1315 "Profile at the bytecode level during interpretation") \ 1316 \ 1317 develop(bool, TraceProfileInterpreter, false, \ 1318 "Trace profiling at the bytecode level during interpretation. " \ 1319 "This outputs the profiling information collected to improve " \ 1320 "jit compilation.") \ 1321 \ 1322 develop_pd(bool, ProfileTraps, \ 1323 "Profile deoptimization traps at the bytecode level") \ 1324 \ 1325 product(intx, ProfileMaturityPercentage, 20, \ 1326 "number of method invocations/branches (expressed as % of " \ 1327 "CompileThreshold) before using the method's profile") \ 1328 range(0, 100) \ 1329 \ 1330 diagnostic(bool, PrintMethodData, false, \ 1331 "Print the results of +ProfileInterpreter at end of run") \ 1332 \ 1333 develop(bool, VerifyDataPointer, trueInDebug, \ 1334 "Verify the method data pointer during interpreter profiling") \ 1335 \ 1336 develop(bool, VerifyCompiledCode, false, \ 1337 "Include miscellaneous runtime verifications in nmethod code; " \ 1338 "default off because it disturbs nmethod size heuristics") \ 1339 \ 1340 notproduct(bool, CrashGCForDumpingJavaThread, false, \ 1341 "Manually make GC thread crash then dump java stack trace; " \ 1342 "Test only") \ 1343 \ 1344 /* compilation */ \ 1345 product(bool, UseCompiler, true, \ 1346 "Use Just-In-Time compilation") \ 1347 \ 1348 product(bool, UseCounterDecay, true, \ 1349 "Adjust recompilation counters") \ 1350 \ 1351 develop(intx, CounterHalfLifeTime, 30, \ 1352 "Half-life time of invocation counters (in seconds)") \ 1353 \ 1354 develop(intx, CounterDecayMinIntervalLength, 500, \ 1355 "The minimum interval (in milliseconds) between invocation of " \ 1356 "CounterDecay") \ 1357 \ 1358 product(bool, AlwaysCompileLoopMethods, false, \ 1359 "When using recompilation, never interpret methods " \ 1360 "containing loops") \ 1361 \ 1362 product(bool, DontCompileHugeMethods, true, \ 1363 "Do not compile methods > HugeMethodLimit") \ 1364 \ 1365 /* Bytecode escape analysis estimation. */ \ 1366 product(bool, EstimateArgEscape, true, \ 1367 "Analyze bytecodes to estimate escape state of arguments") \ 1368 \ 1369 product(intx, BCEATraceLevel, 0, \ 1370 "How much tracing to do of bytecode escape analysis estimates " \ 1371 "(0-3)") \ 1372 range(0, 3) \ 1373 \ 1374 product(intx, MaxBCEAEstimateLevel, 5, \ 1375 "Maximum number of nested calls that are analyzed by BC EA") \ 1376 range(0, max_jint) \ 1377 \ 1378 product(intx, MaxBCEAEstimateSize, 150, \ 1379 "Maximum bytecode size of a method to be analyzed by BC EA") \ 1380 range(0, max_jint) \ 1381 \ 1382 product(intx, AllocatePrefetchStyle, 1, \ 1383 "0 = no prefetch, " \ 1384 "1 = generate prefetch instructions for each allocation, " \ 1385 "2 = use TLAB watermark to gate allocation prefetch, " \ 1386 "3 = generate one prefetch instruction per cache line") \ 1387 range(0, 3) \ 1388 \ 1389 product(intx, AllocatePrefetchDistance, -1, \ 1390 "Distance to prefetch ahead of allocation pointer. " \ 1391 "-1: use system-specific value (automatically determined") \ 1392 constraint(AllocatePrefetchDistanceConstraintFunc,AfterMemoryInit)\ 1393 \ 1394 product(intx, AllocatePrefetchLines, 3, \ 1395 "Number of lines to prefetch ahead of array allocation pointer") \ 1396 range(1, 64) \ 1397 \ 1398 product(intx, AllocateInstancePrefetchLines, 1, \ 1399 "Number of lines to prefetch ahead of instance allocation " \ 1400 "pointer") \ 1401 range(1, 64) \ 1402 \ 1403 product(intx, AllocatePrefetchStepSize, 16, \ 1404 "Step size in bytes of sequential prefetch instructions") \ 1405 range(1, 512) \ 1406 constraint(AllocatePrefetchStepSizeConstraintFunc,AfterMemoryInit)\ 1407 \ 1408 product(intx, AllocatePrefetchInstr, 0, \ 1409 "Select instruction to prefetch ahead of allocation pointer") \ 1410 constraint(AllocatePrefetchInstrConstraintFunc, AfterMemoryInit) \ 1411 \ 1412 /* deoptimization */ \ 1413 develop(bool, TraceDeoptimization, false, \ 1414 "Trace deoptimization") \ 1415 \ 1416 develop(bool, PrintDeoptimizationDetails, false, \ 1417 "Print more information about deoptimization") \ 1418 \ 1419 develop(bool, DebugDeoptimization, false, \ 1420 "Tracing various information while debugging deoptimization") \ 1421 \ 1422 product(intx, SelfDestructTimer, 0, \ 1423 "Will cause VM to terminate after a given time (in minutes) " \ 1424 "(0 means off)") \ 1425 range(0, max_intx) \ 1426 \ 1427 product(intx, MaxJavaStackTraceDepth, 1024, \ 1428 "The maximum number of lines in the stack trace for Java " \ 1429 "exceptions (0 means all)") \ 1430 range(0, max_jint/2) \ 1431 \ 1432 /* notice: the max range value here is max_jint, not max_intx */ \ 1433 /* because of overflow issue */ \ 1434 diagnostic(intx, GuaranteedSafepointInterval, 1000, \ 1435 "Guarantee a safepoint (at least) every so many milliseconds " \ 1436 "(0 means none)") \ 1437 range(0, max_jint) \ 1438 \ 1439 product(intx, SafepointTimeoutDelay, 10000, \ 1440 "Delay in milliseconds for option SafepointTimeout") \ 1441 LP64_ONLY(range(0, max_intx/MICROUNITS)) \ 1442 NOT_LP64(range(0, max_intx)) \ 1443 \ 1444 product(intx, NmethodSweepActivity, 10, \ 1445 "Removes cold nmethods from code cache if > 0. Higher values " \ 1446 "result in more aggressive sweeping") \ 1447 range(0, 2000) \ 1448 \ 1449 notproduct(bool, LogSweeper, false, \ 1450 "Keep a ring buffer of sweeper activity") \ 1451 \ 1452 notproduct(intx, SweeperLogEntries, 1024, \ 1453 "Number of records in the ring buffer of sweeper activity") \ 1454 \ 1455 notproduct(intx, MemProfilingInterval, 500, \ 1456 "Time between each invocation of the MemProfiler") \ 1457 \ 1458 develop(intx, MallocCatchPtr, -1, \ 1459 "Hit breakpoint when mallocing/freeing this pointer") \ 1460 \ 1461 notproduct(ccstrlist, SuppressErrorAt, "", \ 1462 "List of assertions (file:line) to muzzle") \ 1463 \ 1464 develop(intx, StackPrintLimit, 100, \ 1465 "number of stack frames to print in VM-level stack dump") \ 1466 \ 1467 notproduct(intx, MaxElementPrintSize, 256, \ 1468 "maximum number of elements to print") \ 1469 \ 1470 notproduct(intx, MaxSubklassPrintSize, 4, \ 1471 "maximum number of subklasses to print when printing klass") \ 1472 \ 1473 product(intx, MaxInlineLevel, 15, \ 1474 "maximum number of nested calls that are inlined") \ 1475 range(0, max_jint) \ 1476 \ 1477 product(intx, MaxRecursiveInlineLevel, 1, \ 1478 "maximum number of nested recursive calls that are inlined") \ 1479 range(0, max_jint) \ 1480 \ 1481 develop(intx, MaxForceInlineLevel, 100, \ 1482 "maximum number of nested calls that are forced for inlining " \ 1483 "(using CompileCommand or marked w/ @ForceInline)") \ 1484 range(0, max_jint) \ 1485 \ 1486 product_pd(intx, InlineSmallCode, \ 1487 "Only inline already compiled methods if their code size is " \ 1488 "less than this") \ 1489 range(0, max_jint) \ 1490 \ 1491 product(intx, MaxInlineSize, 35, \ 1492 "The maximum bytecode size of a method to be inlined") \ 1493 range(0, max_jint) \ 1494 \ 1495 product_pd(intx, FreqInlineSize, \ 1496 "The maximum bytecode size of a frequent method to be inlined") \ 1497 range(0, max_jint) \ 1498 \ 1499 product(intx, MaxTrivialSize, 6, \ 1500 "The maximum bytecode size of a trivial method to be inlined") \ 1501 range(0, max_jint) \ 1502 \ 1503 product(intx, MinInliningThreshold, 250, \ 1504 "The minimum invocation count a method needs to have to be " \ 1505 "inlined") \ 1506 range(0, max_jint) \ 1507 \ 1508 develop(intx, MethodHistogramCutoff, 100, \ 1509 "The cutoff value for method invocation histogram (+CountCalls)") \ 1510 \ 1511 develop(intx, DontYieldALotInterval, 10, \ 1512 "Interval between which yields will be dropped (milliseconds)") \ 1513 \ 1514 notproduct(intx, DeoptimizeALotInterval, 5, \ 1515 "Number of exits until DeoptimizeALot kicks in") \ 1516 \ 1517 notproduct(intx, ZombieALotInterval, 5, \ 1518 "Number of exits until ZombieALot kicks in") \ 1519 \ 1520 diagnostic(uintx, MallocMaxTestWords, 0, \ 1521 "If non-zero, maximum number of words that malloc/realloc can " \ 1522 "allocate (for testing only)") \ 1523 range(0, max_uintx) \ 1524 \ 1525 product(intx, TypeProfileWidth, 2, \ 1526 "Number of receiver types to record in call/cast profile") \ 1527 range(0, 8) \ 1528 \ 1529 develop(intx, BciProfileWidth, 2, \ 1530 "Number of return bci's to record in ret profile") \ 1531 \ 1532 product(intx, PerMethodRecompilationCutoff, 400, \ 1533 "After recompiling N times, stay in the interpreter (-1=>'Inf')") \ 1534 range(-1, max_intx) \ 1535 \ 1536 product(intx, PerBytecodeRecompilationCutoff, 200, \ 1537 "Per-BCI limit on repeated recompilation (-1=>'Inf')") \ 1538 range(-1, max_intx) \ 1539 \ 1540 product(intx, PerMethodTrapLimit, 100, \ 1541 "Limit on traps (of one kind) in a method (includes inlines)") \ 1542 range(0, max_jint) \ 1543 \ 1544 experimental(intx, PerMethodSpecTrapLimit, 5000, \ 1545 "Limit on speculative traps (of one kind) in a method " \ 1546 "(includes inlines)") \ 1547 range(0, max_jint) \ 1548 \ 1549 product(intx, PerBytecodeTrapLimit, 4, \ 1550 "Limit on traps (of one kind) at a particular BCI") \ 1551 range(0, max_jint) \ 1552 \ 1553 experimental(intx, SpecTrapLimitExtraEntries, 3, \ 1554 "Extra method data trap entries for speculation") \ 1555 \ 1556 develop(intx, InlineFrequencyRatio, 20, \ 1557 "Ratio of call site execution to caller method invocation") \ 1558 range(0, max_jint) \ 1559 \ 1560 diagnostic_pd(intx, InlineFrequencyCount, \ 1561 "Count of call site execution necessary to trigger frequent " \ 1562 "inlining") \ 1563 range(0, max_jint) \ 1564 \ 1565 develop(intx, InlineThrowCount, 50, \ 1566 "Force inlining of interpreted methods that throw this often") \ 1567 range(0, max_jint) \ 1568 \ 1569 develop(intx, InlineThrowMaxSize, 200, \ 1570 "Force inlining of throwing methods smaller than this") \ 1571 range(0, max_jint) \ 1572 \ 1573 develop(intx, ProfilerNodeSize, 1024, \ 1574 "Size in K to allocate for the Profile Nodes of each thread") \ 1575 range(0, 1024) \ 1576 \ 1577 product_pd(size_t, MetaspaceSize, \ 1578 "Initial threshold (in bytes) at which a garbage collection " \ 1579 "is done to reduce Metaspace usage") \ 1580 constraint(MetaspaceSizeConstraintFunc,AfterErgo) \ 1581 \ 1582 product(size_t, MaxMetaspaceSize, max_uintx, \ 1583 "Maximum size of Metaspaces (in bytes)") \ 1584 constraint(MaxMetaspaceSizeConstraintFunc,AfterErgo) \ 1585 \ 1586 product(size_t, CompressedClassSpaceSize, 1*G, \ 1587 "Maximum size of class area in Metaspace when compressed " \ 1588 "class pointers are used") \ 1589 range(1*M, 3*G) \ 1590 \ 1591 manageable(uintx, MinHeapFreeRatio, 40, \ 1592 "The minimum percentage of heap free after GC to avoid expansion."\ 1593 " For most GCs this applies to the old generation. In G1 and" \ 1594 " ParallelGC it applies to the whole heap.") \ 1595 range(0, 100) \ 1596 constraint(MinHeapFreeRatioConstraintFunc,AfterErgo) \ 1597 \ 1598 manageable(uintx, MaxHeapFreeRatio, 70, \ 1599 "The maximum percentage of heap free after GC to avoid shrinking."\ 1600 " For most GCs this applies to the old generation. In G1 and" \ 1601 " ParallelGC it applies to the whole heap.") \ 1602 range(0, 100) \ 1603 constraint(MaxHeapFreeRatioConstraintFunc,AfterErgo) \ 1604 \ 1605 product(bool, ShrinkHeapInSteps, true, \ 1606 "When disabled, informs the GC to shrink the java heap directly" \ 1607 " to the target size at the next full GC rather than requiring" \ 1608 " smaller steps during multiple full GCs.") \ 1609 \ 1610 product(intx, SoftRefLRUPolicyMSPerMB, 1000, \ 1611 "Number of milliseconds per MB of free space in the heap") \ 1612 range(0, max_intx) \ 1613 constraint(SoftRefLRUPolicyMSPerMBConstraintFunc,AfterMemoryInit) \ 1614 \ 1615 product(size_t, MinHeapDeltaBytes, ScaleForWordSize(128*K), \ 1616 "The minimum change in heap space due to GC (in bytes)") \ 1617 range(0, max_uintx) \ 1618 \ 1619 product(size_t, MinMetaspaceExpansion, ScaleForWordSize(256*K), \ 1620 "The minimum expansion of Metaspace (in bytes)") \ 1621 range(0, max_uintx) \ 1622 \ 1623 product(uintx, MaxMetaspaceFreeRatio, 70, \ 1624 "The maximum percentage of Metaspace free after GC to avoid " \ 1625 "shrinking") \ 1626 range(0, 100) \ 1627 constraint(MaxMetaspaceFreeRatioConstraintFunc,AfterErgo) \ 1628 \ 1629 product(uintx, MinMetaspaceFreeRatio, 40, \ 1630 "The minimum percentage of Metaspace free after GC to avoid " \ 1631 "expansion") \ 1632 range(0, 99) \ 1633 constraint(MinMetaspaceFreeRatioConstraintFunc,AfterErgo) \ 1634 \ 1635 product(size_t, MaxMetaspaceExpansion, ScaleForWordSize(4*M), \ 1636 "The maximum expansion of Metaspace without full GC (in bytes)") \ 1637 range(0, max_uintx) \ 1638 \ 1639 /* stack parameters */ \ 1640 product_pd(intx, StackYellowPages, \ 1641 "Number of yellow zone (recoverable overflows) pages of size " \ 1642 "4KB. If pages are bigger yellow zone is aligned up.") \ 1643 range(MIN_STACK_YELLOW_PAGES, (DEFAULT_STACK_YELLOW_PAGES+5)) \ 1644 \ 1645 product_pd(intx, StackRedPages, \ 1646 "Number of red zone (unrecoverable overflows) pages of size " \ 1647 "4KB. If pages are bigger red zone is aligned up.") \ 1648 range(MIN_STACK_RED_PAGES, (DEFAULT_STACK_RED_PAGES+2)) \ 1649 \ 1650 product_pd(intx, StackReservedPages, \ 1651 "Number of reserved zone (reserved to annotated methods) pages" \ 1652 " of size 4KB. If pages are bigger reserved zone is aligned up.") \ 1653 range(MIN_STACK_RESERVED_PAGES, (DEFAULT_STACK_RESERVED_PAGES+10))\ 1654 \ 1655 product(bool, RestrictReservedStack, true, \ 1656 "Restrict @ReservedStackAccess to trusted classes") \ 1657 \ 1658 /* greater stack shadow pages can't generate instruction to bang stack */ \ 1659 product_pd(intx, StackShadowPages, \ 1660 "Number of shadow zone (for overflow checking) pages of size " \ 1661 "4KB. If pages are bigger shadow zone is aligned up. " \ 1662 "This should exceed the depth of the VM and native call stack.") \ 1663 range(MIN_STACK_SHADOW_PAGES, (DEFAULT_STACK_SHADOW_PAGES+30)) \ 1664 \ 1665 product_pd(intx, ThreadStackSize, \ 1666 "Thread Stack Size (in Kbytes)") \ 1667 range(0, 1 * M) \ 1668 \ 1669 product_pd(intx, VMThreadStackSize, \ 1670 "Non-Java Thread Stack Size (in Kbytes)") \ 1671 range(0, max_intx/(1 * K)) \ 1672 \ 1673 product_pd(intx, CompilerThreadStackSize, \ 1674 "Compiler Thread Stack Size (in Kbytes)") \ 1675 range(0, max_intx/(1 * K)) \ 1676 \ 1677 develop_pd(size_t, JVMInvokeMethodSlack, \ 1678 "Stack space (bytes) required for JVM_InvokeMethod to complete") \ 1679 \ 1680 /* code cache parameters */ \ 1681 develop_pd(uintx, CodeCacheSegmentSize, \ 1682 "Code cache segment size (in bytes) - smallest unit of " \ 1683 "allocation") \ 1684 range(1, 1024) \ 1685 constraint(CodeCacheSegmentSizeConstraintFunc, AfterErgo) \ 1686 \ 1687 develop_pd(intx, CodeEntryAlignment, \ 1688 "Code entry alignment for generated code (in bytes)") \ 1689 constraint(CodeEntryAlignmentConstraintFunc, AfterErgo) \ 1690 \ 1691 product_pd(intx, OptoLoopAlignment, \ 1692 "Align inner loops to zero relative to this modulus") \ 1693 range(1, 16) \ 1694 constraint(OptoLoopAlignmentConstraintFunc, AfterErgo) \ 1695 \ 1696 product_pd(uintx, InitialCodeCacheSize, \ 1697 "Initial code cache size (in bytes)") \ 1698 range(os::vm_page_size(), max_uintx) \ 1699 \ 1700 develop_pd(uintx, CodeCacheMinimumUseSpace, \ 1701 "Minimum code cache size (in bytes) required to start VM.") \ 1702 range(0, max_uintx) \ 1703 \ 1704 product(bool, SegmentedCodeCache, false, \ 1705 "Use a segmented code cache") \ 1706 \ 1707 product_pd(uintx, ReservedCodeCacheSize, \ 1708 "Reserved code cache size (in bytes) - maximum code cache size") \ 1709 range(os::vm_page_size(), max_uintx) \ 1710 \ 1711 product_pd(uintx, NonProfiledCodeHeapSize, \ 1712 "Size of code heap with non-profiled methods (in bytes)") \ 1713 range(0, max_uintx) \ 1714 \ 1715 product_pd(uintx, ProfiledCodeHeapSize, \ 1716 "Size of code heap with profiled methods (in bytes)") \ 1717 range(0, max_uintx) \ 1718 \ 1719 product_pd(uintx, NonNMethodCodeHeapSize, \ 1720 "Size of code heap with non-nmethods (in bytes)") \ 1721 range(os::vm_page_size(), max_uintx) \ 1722 \ 1723 product_pd(uintx, CodeCacheExpansionSize, \ 1724 "Code cache expansion size (in bytes)") \ 1725 range(32*K, max_uintx) \ 1726 \ 1727 diagnostic_pd(uintx, CodeCacheMinBlockLength, \ 1728 "Minimum number of segments in a code cache block") \ 1729 range(1, 100) \ 1730 \ 1731 notproduct(bool, ExitOnFullCodeCache, false, \ 1732 "Exit the VM if we fill the code cache") \ 1733 \ 1734 product(bool, UseCodeCacheFlushing, true, \ 1735 "Remove cold/old nmethods from the code cache") \ 1736 \ 1737 product(uintx, StartAggressiveSweepingAt, 10, \ 1738 "Start aggressive sweeping if X[%] of the code cache is free." \ 1739 "Segmented code cache: X[%] of the non-profiled heap." \ 1740 "Non-segmented code cache: X[%] of the total code cache") \ 1741 range(0, 100) \ 1742 \ 1743 /* AOT parameters */ \ 1744 experimental(bool, UseAOT, false, \ 1745 "Use AOT compiled files") \ 1746 \ 1747 experimental(ccstrlist, AOTLibrary, NULL, \ 1748 "AOT library") \ 1749 \ 1750 experimental(bool, PrintAOT, false, \ 1751 "Print used AOT klasses and methods") \ 1752 \ 1753 notproduct(bool, PrintAOTStatistics, false, \ 1754 "Print AOT statistics") \ 1755 \ 1756 diagnostic(bool, UseAOTStrictLoading, false, \ 1757 "Exit the VM if any of the AOT libraries has invalid config") \ 1758 \ 1759 product(bool, CalculateClassFingerprint, false, \ 1760 "Calculate class fingerprint") \ 1761 \ 1762 /* interpreter debugging */ \ 1763 develop(intx, BinarySwitchThreshold, 5, \ 1764 "Minimal number of lookupswitch entries for rewriting to binary " \ 1765 "switch") \ 1766 \ 1767 develop(intx, StopInterpreterAt, 0, \ 1768 "Stop interpreter execution at specified bytecode number") \ 1769 \ 1770 develop(intx, TraceBytecodesAt, 0, \ 1771 "Trace bytecodes starting with specified bytecode number") \ 1772 \ 1773 /* compiler interface */ \ 1774 develop(intx, CIStart, 0, \ 1775 "The id of the first compilation to permit") \ 1776 \ 1777 develop(intx, CIStop, max_jint, \ 1778 "The id of the last compilation to permit") \ 1779 \ 1780 develop(intx, CIStartOSR, 0, \ 1781 "The id of the first osr compilation to permit " \ 1782 "(CICountOSR must be on)") \ 1783 \ 1784 develop(intx, CIStopOSR, max_jint, \ 1785 "The id of the last osr compilation to permit " \ 1786 "(CICountOSR must be on)") \ 1787 \ 1788 develop(intx, CIBreakAtOSR, -1, \ 1789 "The id of osr compilation to break at") \ 1790 \ 1791 develop(intx, CIBreakAt, -1, \ 1792 "The id of compilation to break at") \ 1793 \ 1794 product(ccstrlist, CompileOnly, "", \ 1795 "List of methods (pkg/class.name) to restrict compilation to") \ 1796 \ 1797 product(ccstr, CompileCommandFile, NULL, \ 1798 "Read compiler commands from this file [.hotspot_compiler]") \ 1799 \ 1800 diagnostic(ccstr, CompilerDirectivesFile, NULL, \ 1801 "Read compiler directives from this file") \ 1802 \ 1803 product(ccstrlist, CompileCommand, "", \ 1804 "Prepend to .hotspot_compiler; e.g. log,java/lang/String.<init>") \ 1805 \ 1806 develop(bool, ReplayCompiles, false, \ 1807 "Enable replay of compilations from ReplayDataFile") \ 1808 \ 1809 product(ccstr, ReplayDataFile, NULL, \ 1810 "File containing compilation replay information" \ 1811 "[default: ./replay_pid%p.log] (%p replaced with pid)") \ 1812 \ 1813 product(ccstr, InlineDataFile, NULL, \ 1814 "File containing inlining replay information" \ 1815 "[default: ./inline_pid%p.log] (%p replaced with pid)") \ 1816 \ 1817 develop(intx, ReplaySuppressInitializers, 2, \ 1818 "Control handling of class initialization during replay: " \ 1819 "0 - don't do anything special; " \ 1820 "1 - treat all class initializers as empty; " \ 1821 "2 - treat class initializers for application classes as empty; " \ 1822 "3 - allow all class initializers to run during bootstrap but " \ 1823 " pretend they are empty after starting replay") \ 1824 range(0, 3) \ 1825 \ 1826 develop(bool, ReplayIgnoreInitErrors, false, \ 1827 "Ignore exceptions thrown during initialization for replay") \ 1828 \ 1829 product(bool, DumpReplayDataOnError, true, \ 1830 "Record replay data for crashing compiler threads") \ 1831 \ 1832 product(bool, CICompilerCountPerCPU, false, \ 1833 "1 compiler thread for log(N CPUs)") \ 1834 \ 1835 notproduct(intx, CICrashAt, -1, \ 1836 "id of compilation to trigger assert in compiler thread for " \ 1837 "the purpose of testing, e.g. generation of replay data") \ 1838 notproduct(bool, CIObjectFactoryVerify, false, \ 1839 "enable potentially expensive verification in ciObjectFactory") \ 1840 \ 1841 diagnostic(bool, AbortVMOnCompilationFailure, false, \ 1842 "Abort VM when method had failed to compile.") \ 1843 \ 1844 /* Priorities */ \ 1845 product_pd(bool, UseThreadPriorities, "Use native thread priorities") \ 1846 \ 1847 product(intx, ThreadPriorityPolicy, 0, \ 1848 "0 : Normal. "\ 1849 " VM chooses priorities that are appropriate for normal "\ 1850 " applications. On Solaris NORM_PRIORITY and above are mapped "\ 1851 " to normal native priority. Java priorities below " \ 1852 " NORM_PRIORITY map to lower native priority values. On "\ 1853 " Windows applications are allowed to use higher native "\ 1854 " priorities. However, with ThreadPriorityPolicy=0, VM will "\ 1855 " not use the highest possible native priority, "\ 1856 " THREAD_PRIORITY_TIME_CRITICAL, as it may interfere with "\ 1857 " system threads. On Linux thread priorities are ignored "\ 1858 " because the OS does not support static priority in "\ 1859 " SCHED_OTHER scheduling class which is the only choice for "\ 1860 " non-root, non-realtime applications. "\ 1861 "1 : Aggressive. "\ 1862 " Java thread priorities map over to the entire range of "\ 1863 " native thread priorities. Higher Java thread priorities map "\ 1864 " to higher native thread priorities. This policy should be "\ 1865 " used with care, as sometimes it can cause performance "\ 1866 " degradation in the application and/or the entire system. On "\ 1867 " Linux/BSD/macOS this policy requires root privilege or an "\ 1868 " extended capability.") \ 1869 range(0, 1) \ 1870 \ 1871 product(bool, ThreadPriorityVerbose, false, \ 1872 "Print priority changes") \ 1873 \ 1874 product(intx, CompilerThreadPriority, -1, \ 1875 "The native priority at which compiler threads should run " \ 1876 "(-1 means no change)") \ 1877 range(min_jint, max_jint) \ 1878 constraint(CompilerThreadPriorityConstraintFunc, AfterErgo) \ 1879 \ 1880 product(intx, VMThreadPriority, -1, \ 1881 "The native priority at which the VM thread should run " \ 1882 "(-1 means no change)") \ 1883 range(-1, 127) \ 1884 \ 1885 product(intx, JavaPriority1_To_OSPriority, -1, \ 1886 "Map Java priorities to OS priorities") \ 1887 range(-1, 127) \ 1888 \ 1889 product(intx, JavaPriority2_To_OSPriority, -1, \ 1890 "Map Java priorities to OS priorities") \ 1891 range(-1, 127) \ 1892 \ 1893 product(intx, JavaPriority3_To_OSPriority, -1, \ 1894 "Map Java priorities to OS priorities") \ 1895 range(-1, 127) \ 1896 \ 1897 product(intx, JavaPriority4_To_OSPriority, -1, \ 1898 "Map Java priorities to OS priorities") \ 1899 range(-1, 127) \ 1900 \ 1901 product(intx, JavaPriority5_To_OSPriority, -1, \ 1902 "Map Java priorities to OS priorities") \ 1903 range(-1, 127) \ 1904 \ 1905 product(intx, JavaPriority6_To_OSPriority, -1, \ 1906 "Map Java priorities to OS priorities") \ 1907 range(-1, 127) \ 1908 \ 1909 product(intx, JavaPriority7_To_OSPriority, -1, \ 1910 "Map Java priorities to OS priorities") \ 1911 range(-1, 127) \ 1912 \ 1913 product(intx, JavaPriority8_To_OSPriority, -1, \ 1914 "Map Java priorities to OS priorities") \ 1915 range(-1, 127) \ 1916 \ 1917 product(intx, JavaPriority9_To_OSPriority, -1, \ 1918 "Map Java priorities to OS priorities") \ 1919 range(-1, 127) \ 1920 \ 1921 product(intx, JavaPriority10_To_OSPriority,-1, \ 1922 "Map Java priorities to OS priorities") \ 1923 range(-1, 127) \ 1924 \ 1925 experimental(bool, UseCriticalJavaThreadPriority, false, \ 1926 "Java thread priority 10 maps to critical scheduling priority") \ 1927 \ 1928 experimental(bool, UseCriticalCompilerThreadPriority, false, \ 1929 "Compiler thread(s) run at critical scheduling priority") \ 1930 \ 1931 develop(intx, NewCodeParameter, 0, \ 1932 "Testing Only: Create a dedicated integer parameter before " \ 1933 "putback") \ 1934 \ 1935 /* new oopmap storage allocation */ \ 1936 develop(intx, MinOopMapAllocation, 8, \ 1937 "Minimum number of OopMap entries in an OopMapSet") \ 1938 \ 1939 /* Background Compilation */ \ 1940 develop(intx, LongCompileThreshold, 50, \ 1941 "Used with +TraceLongCompiles") \ 1942 \ 1943 /* recompilation */ \ 1944 product_pd(intx, CompileThreshold, \ 1945 "number of interpreted method invocations before (re-)compiling") \ 1946 constraint(CompileThresholdConstraintFunc, AfterErgo) \ 1947 \ 1948 product(double, CompileThresholdScaling, 1.0, \ 1949 "Factor to control when first compilation happens " \ 1950 "(both with and without tiered compilation): " \ 1951 "values greater than 1.0 delay counter overflow, " \ 1952 "values between 0 and 1.0 rush counter overflow, " \ 1953 "value of 1.0 leaves compilation thresholds unchanged " \ 1954 "value of 0.0 is equivalent to -Xint. " \ 1955 "" \ 1956 "Flag can be set as per-method option. " \ 1957 "If a value is specified for a method, compilation thresholds " \ 1958 "for that method are scaled by both the value of the global flag "\ 1959 "and the value of the per-method flag.") \ 1960 range(0.0, DBL_MAX) \ 1961 \ 1962 product(intx, Tier0InvokeNotifyFreqLog, 7, \ 1963 "Interpreter (tier 0) invocation notification frequency") \ 1964 range(0, 30) \ 1965 \ 1966 product(intx, Tier2InvokeNotifyFreqLog, 11, \ 1967 "C1 without MDO (tier 2) invocation notification frequency") \ 1968 range(0, 30) \ 1969 \ 1970 product(intx, Tier3InvokeNotifyFreqLog, 10, \ 1971 "C1 with MDO profiling (tier 3) invocation notification " \ 1972 "frequency") \ 1973 range(0, 30) \ 1974 \ 1975 product(intx, Tier23InlineeNotifyFreqLog, 20, \ 1976 "Inlinee invocation (tiers 2 and 3) notification frequency") \ 1977 range(0, 30) \ 1978 \ 1979 product(intx, Tier0BackedgeNotifyFreqLog, 10, \ 1980 "Interpreter (tier 0) invocation notification frequency") \ 1981 range(0, 30) \ 1982 \ 1983 product(intx, Tier2BackedgeNotifyFreqLog, 14, \ 1984 "C1 without MDO (tier 2) invocation notification frequency") \ 1985 range(0, 30) \ 1986 \ 1987 product(intx, Tier3BackedgeNotifyFreqLog, 13, \ 1988 "C1 with MDO profiling (tier 3) invocation notification " \ 1989 "frequency") \ 1990 range(0, 30) \ 1991 \ 1992 product(intx, Tier2CompileThreshold, 0, \ 1993 "threshold at which tier 2 compilation is invoked") \ 1994 range(0, max_jint) \ 1995 \ 1996 product(intx, Tier2BackEdgeThreshold, 0, \ 1997 "Back edge threshold at which tier 2 compilation is invoked") \ 1998 range(0, max_jint) \ 1999 \ 2000 product(intx, Tier3InvocationThreshold, 200, \ 2001 "Compile if number of method invocations crosses this " \ 2002 "threshold") \ 2003 range(0, max_jint) \ 2004 \ 2005 product(intx, Tier3MinInvocationThreshold, 100, \ 2006 "Minimum invocation to compile at tier 3") \ 2007 range(0, max_jint) \ 2008 \ 2009 product(intx, Tier3CompileThreshold, 2000, \ 2010 "Threshold at which tier 3 compilation is invoked (invocation " \ 2011 "minimum must be satisfied)") \ 2012 range(0, max_jint) \ 2013 \ 2014 product(intx, Tier3BackEdgeThreshold, 60000, \ 2015 "Back edge threshold at which tier 3 OSR compilation is invoked") \ 2016 range(0, max_jint) \ 2017 \ 2018 product(intx, Tier3AOTInvocationThreshold, 10000, \ 2019 "Compile if number of method invocations crosses this " \ 2020 "threshold if coming from AOT") \ 2021 range(0, max_jint) \ 2022 \ 2023 product(intx, Tier3AOTMinInvocationThreshold, 1000, \ 2024 "Minimum invocation to compile at tier 3 if coming from AOT") \ 2025 range(0, max_jint) \ 2026 \ 2027 product(intx, Tier3AOTCompileThreshold, 15000, \ 2028 "Threshold at which tier 3 compilation is invoked (invocation " \ 2029 "minimum must be satisfied) if coming from AOT") \ 2030 range(0, max_jint) \ 2031 \ 2032 product(intx, Tier3AOTBackEdgeThreshold, 120000, \ 2033 "Back edge threshold at which tier 3 OSR compilation is invoked " \ 2034 "if coming from AOT") \ 2035 range(0, max_jint) \ 2036 \ 2037 diagnostic(intx, Tier0AOTInvocationThreshold, 200, \ 2038 "Switch to interpreter to profile if the number of method " \ 2039 "invocations crosses this threshold if coming from AOT " \ 2040 "(applicable only with " \ 2041 "CompilationMode=high-only|high-only-quick-internal)") \ 2042 range(0, max_jint) \ 2043 \ 2044 diagnostic(intx, Tier0AOTMinInvocationThreshold, 100, \ 2045 "Minimum number of invocations to switch to interpreter " \ 2046 "to profile if coming from AOT " \ 2047 "(applicable only with " \ 2048 "CompilationMode=high-only|high-only-quick-internal)") \ 2049 range(0, max_jint) \ 2050 \ 2051 diagnostic(intx, Tier0AOTCompileThreshold, 2000, \ 2052 "Threshold at which to switch to interpreter to profile " \ 2053 "if coming from AOT " \ 2054 "(invocation minimum must be satisfied, " \ 2055 "applicable only with " \ 2056 "CompilationMode=high-only|high-only-quick-internal)") \ 2057 range(0, max_jint) \ 2058 \ 2059 diagnostic(intx, Tier0AOTBackEdgeThreshold, 60000, \ 2060 "Back edge threshold at which to switch to interpreter " \ 2061 "to profile if coming from AOT " \ 2062 "(applicable only with " \ 2063 "CompilationMode=high-only|high-only-quick-internal)") \ 2064 range(0, max_jint) \ 2065 \ 2066 product(intx, Tier4InvocationThreshold, 5000, \ 2067 "Compile if number of method invocations crosses this " \ 2068 "threshold") \ 2069 range(0, max_jint) \ 2070 \ 2071 product(intx, Tier4MinInvocationThreshold, 600, \ 2072 "Minimum invocation to compile at tier 4") \ 2073 range(0, max_jint) \ 2074 \ 2075 product(intx, Tier4CompileThreshold, 15000, \ 2076 "Threshold at which tier 4 compilation is invoked (invocation " \ 2077 "minimum must be satisfied)") \ 2078 range(0, max_jint) \ 2079 \ 2080 product(intx, Tier4BackEdgeThreshold, 40000, \ 2081 "Back edge threshold at which tier 4 OSR compilation is invoked") \ 2082 range(0, max_jint) \ 2083 \ 2084 diagnostic(intx, Tier40InvocationThreshold, 5000, \ 2085 "Compile if number of method invocations crosses this " \ 2086 "threshold (applicable only with " \ 2087 "CompilationMode=high-only|high-only-quick-internal)") \ 2088 range(0, max_jint) \ 2089 \ 2090 diagnostic(intx, Tier40MinInvocationThreshold, 600, \ 2091 "Minimum number of invocations to compile at tier 4 " \ 2092 "(applicable only with " \ 2093 "CompilationMode=high-only|high-only-quick-internal)") \ 2094 range(0, max_jint) \ 2095 \ 2096 diagnostic(intx, Tier40CompileThreshold, 10000, \ 2097 "Threshold at which tier 4 compilation is invoked (invocation " \ 2098 "minimum must be satisfied, applicable only with " \ 2099 "CompilationMode=high-only|high-only-quick-internal)") \ 2100 range(0, max_jint) \ 2101 \ 2102 diagnostic(intx, Tier40BackEdgeThreshold, 15000, \ 2103 "Back edge threshold at which tier 4 OSR compilation is invoked " \ 2104 "(applicable only with " \ 2105 "CompilationMode=high-only|high-only-quick-internal)") \ 2106 range(0, max_jint) \ 2107 \ 2108 diagnostic(intx, Tier0Delay, 5, \ 2109 "If C2 queue size grows over this amount per compiler thread " \ 2110 "do not start profiling in the interpreter " \ 2111 "(applicable only with " \ 2112 "CompilationMode=high-only|high-only-quick-internal)") \ 2113 range(0, max_jint) \ 2114 \ 2115 product(intx, Tier3DelayOn, 5, \ 2116 "If C2 queue size grows over this amount per compiler thread " \ 2117 "stop compiling at tier 3 and start compiling at tier 2") \ 2118 range(0, max_jint) \ 2119 \ 2120 product(intx, Tier3DelayOff, 2, \ 2121 "If C2 queue size is less than this amount per compiler thread " \ 2122 "allow methods compiled at tier 2 transition to tier 3") \ 2123 range(0, max_jint) \ 2124 \ 2125 product(intx, Tier3LoadFeedback, 5, \ 2126 "Tier 3 thresholds will increase twofold when C1 queue size " \ 2127 "reaches this amount per compiler thread") \ 2128 range(0, max_jint) \ 2129 \ 2130 product(intx, Tier4LoadFeedback, 3, \ 2131 "Tier 4 thresholds will increase twofold when C2 queue size " \ 2132 "reaches this amount per compiler thread") \ 2133 range(0, max_jint) \ 2134 \ 2135 product(intx, TieredCompileTaskTimeout, 50, \ 2136 "Kill compile task if method was not used within " \ 2137 "given timeout in milliseconds") \ 2138 range(0, max_intx) \ 2139 \ 2140 product(intx, TieredStopAtLevel, 4, \ 2141 "Stop at given compilation level") \ 2142 range(0, 4) \ 2143 \ 2144 product(intx, Tier0ProfilingStartPercentage, 200, \ 2145 "Start profiling in interpreter if the counters exceed tier 3 " \ 2146 "thresholds (tier 4 thresholds with " \ 2147 "CompilationMode=high-only|high-only-quick-internal)" \ 2148 "by the specified percentage") \ 2149 range(0, max_jint) \ 2150 \ 2151 product(uintx, IncreaseFirstTierCompileThresholdAt, 50, \ 2152 "Increase the compile threshold for C1 compilation if the code " \ 2153 "cache is filled by the specified percentage") \ 2154 range(0, 99) \ 2155 \ 2156 product(intx, TieredRateUpdateMinTime, 1, \ 2157 "Minimum rate sampling interval (in milliseconds)") \ 2158 range(0, max_intx) \ 2159 \ 2160 product(intx, TieredRateUpdateMaxTime, 25, \ 2161 "Maximum rate sampling interval (in milliseconds)") \ 2162 range(0, max_intx) \ 2163 \ 2164 product(ccstr, CompilationMode, "default", \ 2165 "Compilation modes: " \ 2166 "default: normal tiered compilation; " \ 2167 "quick-only: C1-only mode; " \ 2168 "high-only: C2/JVMCI-only mode; " \ 2169 "high-only-quick-internal: C2/JVMCI-only mode, " \ 2170 "with JVMCI compiler compiled with C1.") \ 2171 \ 2172 product_pd(bool, TieredCompilation, \ 2173 "Enable tiered compilation") \ 2174 \ 2175 product(bool, PrintTieredEvents, false, \ 2176 "Print tiered events notifications") \ 2177 \ 2178 product_pd(intx, OnStackReplacePercentage, \ 2179 "NON_TIERED number of method invocations/branches (expressed as " \ 2180 "% of CompileThreshold) before (re-)compiling OSR code") \ 2181 constraint(OnStackReplacePercentageConstraintFunc, AfterErgo) \ 2182 \ 2183 product(intx, InterpreterProfilePercentage, 33, \ 2184 "NON_TIERED number of method invocations/branches (expressed as " \ 2185 "% of CompileThreshold) before profiling in the interpreter") \ 2186 range(0, 100) \ 2187 \ 2188 develop(intx, DesiredMethodLimit, 8000, \ 2189 "The desired maximum method size (in bytecodes) after inlining") \ 2190 \ 2191 develop(intx, HugeMethodLimit, 8000, \ 2192 "Don't compile methods larger than this if " \ 2193 "+DontCompileHugeMethods") \ 2194 \ 2195 /* Properties for Java libraries */ \ 2196 \ 2197 product(uint64_t, MaxDirectMemorySize, 0, \ 2198 "Maximum total size of NIO direct-buffer allocations") \ 2199 range(0, max_jlong) \ 2200 \ 2201 /* Flags used for temporary code during development */ \ 2202 \ 2203 diagnostic(bool, UseNewCode, false, \ 2204 "Testing Only: Use the new version while testing") \ 2205 \ 2206 diagnostic(bool, UseNewCode2, false, \ 2207 "Testing Only: Use the new version while testing") \ 2208 \ 2209 diagnostic(bool, UseNewCode3, false, \ 2210 "Testing Only: Use the new version while testing") \ 2211 \ 2212 /* flags for performance data collection */ \ 2213 \ 2214 product(bool, UsePerfData, true, \ 2215 "Flag to disable jvmstat instrumentation for performance testing "\ 2216 "and problem isolation purposes") \ 2217 \ 2218 product(bool, PerfDataSaveToFile, false, \ 2219 "Save PerfData memory to hsperfdata_<pid> file on exit") \ 2220 \ 2221 product(ccstr, PerfDataSaveFile, NULL, \ 2222 "Save PerfData memory to the specified absolute pathname. " \ 2223 "The string %p in the file name (if present) " \ 2224 "will be replaced by pid") \ 2225 \ 2226 product(intx, PerfDataSamplingInterval, 50, \ 2227 "Data sampling interval (in milliseconds)") \ 2228 range(PeriodicTask::min_interval, max_jint) \ 2229 constraint(PerfDataSamplingIntervalFunc, AfterErgo) \ 2230 \ 2231 product(bool, PerfDisableSharedMem, false, \ 2232 "Store performance data in standard memory") \ 2233 \ 2234 product(intx, PerfDataMemorySize, 32*K, \ 2235 "Size of performance data memory region. Will be rounded " \ 2236 "up to a multiple of the native os page size.") \ 2237 range(128, 32*64*K) \ 2238 \ 2239 product(intx, PerfMaxStringConstLength, 1024, \ 2240 "Maximum PerfStringConstant string length before truncation") \ 2241 range(32, 32*K) \ 2242 \ 2243 product(bool, PerfAllowAtExitRegistration, false, \ 2244 "Allow registration of atexit() methods") \ 2245 \ 2246 product(bool, PerfBypassFileSystemCheck, false, \ 2247 "Bypass Win32 file system criteria checks (Windows Only)") \ 2248 \ 2249 product(intx, UnguardOnExecutionViolation, 0, \ 2250 "Unguard page and retry on no-execute fault (Win32 only) " \ 2251 "0=off, 1=conservative, 2=aggressive") \ 2252 range(0, 2) \ 2253 \ 2254 /* Serviceability Support */ \ 2255 \ 2256 product(bool, ManagementServer, false, \ 2257 "Create JMX Management Server") \ 2258 \ 2259 product(bool, DisableAttachMechanism, false, \ 2260 "Disable mechanism that allows tools to attach to this VM") \ 2261 \ 2262 product(bool, StartAttachListener, false, \ 2263 "Always start Attach Listener at VM startup") \ 2264 \ 2265 product(bool, EnableDynamicAgentLoading, true, \ 2266 "Allow tools to load agents with the attach mechanism") \ 2267 \ 2268 manageable(bool, PrintConcurrentLocks, false, \ 2269 "Print java.util.concurrent locks in thread dump") \ 2270 \ 2271 /* Shared spaces */ \ 2272 \ 2273 product(bool, UseSharedSpaces, true, \ 2274 "Use shared spaces for metadata") \ 2275 \ 2276 product(bool, VerifySharedSpaces, false, \ 2277 "Verify integrity of shared spaces") \ 2278 \ 2279 product(bool, RequireSharedSpaces, false, \ 2280 "Require shared spaces for metadata") \ 2281 \ 2282 product(bool, DumpSharedSpaces, false, \ 2283 "Special mode: JVM reads a class list, loads classes, builds " \ 2284 "shared spaces, and dumps the shared spaces to a file to be " \ 2285 "used in future JVM runs") \ 2286 \ 2287 product(bool, DynamicDumpSharedSpaces, false, \ 2288 "Dynamic archive") \ 2289 \ 2290 product(bool, PrintSharedArchiveAndExit, false, \ 2291 "Print shared archive file contents") \ 2292 \ 2293 product(bool, PrintSharedDictionary, false, \ 2294 "If PrintSharedArchiveAndExit is true, also print the shared " \ 2295 "dictionary") \ 2296 \ 2297 product(size_t, SharedBaseAddress, LP64_ONLY(32*G) \ 2298 NOT_LP64(LINUX_ONLY(2*G) NOT_LINUX(0)), \ 2299 "Address to allocate shared memory region for class data") \ 2300 range(0, SIZE_MAX) \ 2301 \ 2302 product(ccstr, SharedArchiveConfigFile, NULL, \ 2303 "Data to add to the CDS archive file") \ 2304 \ 2305 product(uintx, SharedSymbolTableBucketSize, 4, \ 2306 "Average number of symbols per bucket in shared table") \ 2307 range(2, 246) \ 2308 \ 2309 diagnostic(bool, AllowArchivingWithJavaAgent, false, \ 2310 "Allow Java agent to be run with CDS dumping") \ 2311 \ 2312 diagnostic(bool, PrintMethodHandleStubs, false, \ 2313 "Print generated stub code for method handles") \ 2314 \ 2315 develop(bool, TraceMethodHandles, false, \ 2316 "trace internal method handle operations") \ 2317 \ 2318 diagnostic(bool, VerifyMethodHandles, trueInDebug, \ 2319 "perform extra checks when constructing method handles") \ 2320 \ 2321 diagnostic(bool, ShowHiddenFrames, false, \ 2322 "show method handle implementation frames (usually hidden)") \ 2323 \ 2324 experimental(bool, TrustFinalNonStaticFields, false, \ 2325 "trust final non-static declarations for constant folding") \ 2326 \ 2327 diagnostic(bool, FoldStableValues, true, \ 2328 "Optimize loads from stable fields (marked w/ @Stable)") \ 2329 \ 2330 develop(bool, TraceInvokeDynamic, false, \ 2331 "trace internal invoke dynamic operations") \ 2332 \ 2333 diagnostic(int, UseBootstrapCallInfo, 1, \ 2334 "0: when resolving InDy or ConDy, force all BSM arguments to be " \ 2335 "resolved before the bootstrap method is called; 1: when a BSM " \ 2336 "that may accept a BootstrapCallInfo is detected, use that API " \ 2337 "to pass BSM arguments, which allows the BSM to delay their " \ 2338 "resolution; 2+: stress test the BCI API by calling more BSMs " \ 2339 "via that API, instead of with the eagerly-resolved array.") \ 2340 \ 2341 diagnostic(bool, PauseAtStartup, false, \ 2342 "Causes the VM to pause at startup time and wait for the pause " \ 2343 "file to be removed (default: ./vm.paused.<pid>)") \ 2344 \ 2345 diagnostic(ccstr, PauseAtStartupFile, NULL, \ 2346 "The file to create and for whose removal to await when pausing " \ 2347 "at startup. (default: ./vm.paused.<pid>)") \ 2348 \ 2349 diagnostic(bool, PauseAtExit, false, \ 2350 "Pause and wait for keypress on exit if a debugger is attached") \ 2351 \ 2352 product(bool, ExtendedDTraceProbes, false, \ 2353 "Enable performance-impacting dtrace probes") \ 2354 \ 2355 product(bool, DTraceMethodProbes, false, \ 2356 "Enable dtrace probes for method-entry and method-exit") \ 2357 \ 2358 product(bool, DTraceAllocProbes, false, \ 2359 "Enable dtrace probes for object allocation") \ 2360 \ 2361 product(bool, DTraceMonitorProbes, false, \ 2362 "Enable dtrace probes for monitor events") \ 2363 \ 2364 product(bool, RelaxAccessControlCheck, false, \ 2365 "Relax the access control checks in the verifier") \ 2366 \ 2367 product(uintx, StringTableSize, defaultStringTableSize, \ 2368 "Number of buckets in the interned String table " \ 2369 "(will be rounded to nearest higher power of 2)") \ 2370 range(minimumStringTableSize, 16777216ul /* 2^24 */) \ 2371 \ 2372 experimental(uintx, SymbolTableSize, defaultSymbolTableSize, \ 2373 "Number of buckets in the JVM internal Symbol table") \ 2374 range(minimumSymbolTableSize, 16777216ul /* 2^24 */) \ 2375 \ 2376 product(bool, UseStringDeduplication, false, \ 2377 "Use string deduplication") \ 2378 \ 2379 product(uintx, StringDeduplicationAgeThreshold, 3, \ 2380 "A string must reach this age (or be promoted to an old region) " \ 2381 "to be considered for deduplication") \ 2382 range(1, markWord::max_age) \ 2383 \ 2384 diagnostic(bool, StringDeduplicationResizeALot, false, \ 2385 "Force table resize every time the table is scanned") \ 2386 \ 2387 diagnostic(bool, StringDeduplicationRehashALot, false, \ 2388 "Force table rehash every time the table is scanned") \ 2389 \ 2390 diagnostic(bool, WhiteBoxAPI, false, \ 2391 "Enable internal testing APIs") \ 2392 \ 2393 experimental(intx, SurvivorAlignmentInBytes, 0, \ 2394 "Default survivor space alignment in bytes") \ 2395 range(8, 256) \ 2396 constraint(SurvivorAlignmentInBytesConstraintFunc,AfterErgo) \ 2397 \ 2398 product(ccstr, DumpLoadedClassList, NULL, \ 2399 "Dump the names all loaded classes, that could be stored into " \ 2400 "the CDS archive, in the specified file") \ 2401 \ 2402 product(ccstr, SharedClassListFile, NULL, \ 2403 "Override the default CDS class list") \ 2404 \ 2405 product(ccstr, SharedArchiveFile, NULL, \ 2406 "Override the default location of the CDS archive file") \ 2407 \ 2408 product(ccstr, ArchiveClassesAtExit, NULL, \ 2409 "The path and name of the dynamic archive file") \ 2410 \ 2411 product(ccstr, ExtraSharedClassListFile, NULL, \ 2412 "Extra classlist for building the CDS archive file") \ 2413 \ 2414 diagnostic(intx, ArchiveRelocationMode, 0, \ 2415 "(0) first map at preferred address, and if " \ 2416 "unsuccessful, map at alternative address (default); " \ 2417 "(1) always map at alternative address; " \ 2418 "(2) always map at preferred address, and if unsuccessful, " \ 2419 "do not map the archive") \ 2420 range(0, 2) \ 2421 \ 2422 experimental(size_t, ArrayAllocatorMallocLimit, \ 2423 SOLARIS_ONLY(64*K) NOT_SOLARIS((size_t)-1), \ 2424 "Allocation less than this value will be allocated " \ 2425 "using malloc. Larger allocations will use mmap.") \ 2426 \ 2427 experimental(bool, AlwaysAtomicAccesses, false, \ 2428 "Accesses to all variables should always be atomic") \ 2429 \ 2430 diagnostic(bool, UseUnalignedAccesses, false, \ 2431 "Use unaligned memory accesses in Unsafe") \ 2432 \ 2433 product_pd(bool, PreserveFramePointer, \ 2434 "Use the FP register for holding the frame pointer " \ 2435 "and not as a general purpose register.") \ 2436 \ 2437 diagnostic(bool, CheckIntrinsics, true, \ 2438 "When a class C is loaded, check that " \ 2439 "(1) all intrinsics defined by the VM for class C are present "\ 2440 "in the loaded class file and are marked with the " \ 2441 "@HotSpotIntrinsicCandidate annotation, that " \ 2442 "(2) there is an intrinsic registered for all loaded methods " \ 2443 "that are annotated with the @HotSpotIntrinsicCandidate " \ 2444 "annotation, and that " \ 2445 "(3) no orphan methods exist for class C (i.e., methods for " \ 2446 "which the VM declares an intrinsic but that are not declared "\ 2447 "in the loaded class C. " \ 2448 "Check (3) is available only in debug builds.") \ 2449 \ 2450 diagnostic_pd(intx, InitArrayShortSize, \ 2451 "Threshold small size (in bytes) for clearing arrays. " \ 2452 "Anything this size or smaller may get converted to discrete " \ 2453 "scalar stores.") \ 2454 range(0, max_intx) \ 2455 constraint(InitArrayShortSizeConstraintFunc, AfterErgo) \ 2456 \ 2457 diagnostic(bool, CompilerDirectivesIgnoreCompileCommands, false, \ 2458 "Disable backwards compatibility for compile commands.") \ 2459 \ 2460 diagnostic(bool, CompilerDirectivesPrint, false, \ 2461 "Print compiler directives on installation.") \ 2462 diagnostic(int, CompilerDirectivesLimit, 50, \ 2463 "Limit on number of compiler directives.") \ 2464 \ 2465 product(ccstr, AllocateHeapAt, NULL, \ 2466 "Path to the directoy where a temporary file will be created " \ 2467 "to use as the backing store for Java Heap.") \ 2468 \ 2469 experimental(ccstr, AllocateOldGenAt, NULL, \ 2470 "Path to the directoy where a temporary file will be " \ 2471 "created to use as the backing store for old generation." \ 2472 "File of size Xmx is pre-allocated for performance reason, so" \ 2473 "we need that much space available") \ 2474 \ 2475 develop(int, VerifyMetaspaceInterval, DEBUG_ONLY(500) NOT_DEBUG(0), \ 2476 "Run periodic metaspace verifications (0 - none, " \ 2477 "1 - always, >1 every nth interval)") \ 2478 \ 2479 diagnostic(bool, ShowRegistersOnAssert, true, \ 2480 "On internal errors, include registers in error report.") \ 2481 \ 2482 diagnostic(bool, UseSwitchProfiling, true, \ 2483 "leverage profiling for table/lookup switch") \ 2484 \ 2485 develop(bool, TraceMemoryWriteback, false, \ 2486 "Trace memory writeback operations") \ 2487 \ 2488 JFR_ONLY(product(bool, FlightRecorder, false, \ 2489 "(Deprecated) Enable Flight Recorder")) \ 2490 \ 2491 JFR_ONLY(product(ccstr, FlightRecorderOptions, NULL, \ 2492 "Flight Recorder options")) \ 2493 \ 2494 JFR_ONLY(product(ccstr, StartFlightRecording, NULL, \ 2495 "Start flight recording with options")) \ 2496 \ 2497 experimental(bool, UseFastUnorderedTimeStamps, false, \ 2498 "Use platform unstable time where supported for timestamps only") \ 2499 \ 2500 product(bool, UseNewFieldLayout, true, \ 2501 "(Deprecated) Use new algorithm to compute field layouts") \ 2502 \ 2503 product(bool, UseEmptySlotsInSupers, true, \ 2504 "Allow allocating fields in empty slots of super-classes") \ 2505 \ 2506 2507 2508 // Interface macros 2509 #define DECLARE_PRODUCT_FLAG(type, name, value, doc) extern "C" type name; 2510 #define DECLARE_PD_PRODUCT_FLAG(type, name, doc) extern "C" type name; 2511 #define DECLARE_DIAGNOSTIC_FLAG(type, name, value, doc) extern "C" type name; 2512 #define DECLARE_PD_DIAGNOSTIC_FLAG(type, name, doc) extern "C" type name; 2513 #define DECLARE_EXPERIMENTAL_FLAG(type, name, value, doc) extern "C" type name; 2514 #define DECLARE_MANAGEABLE_FLAG(type, name, value, doc) extern "C" type name; 2515 #define DECLARE_PRODUCT_RW_FLAG(type, name, value, doc) extern "C" type name; 2516 #ifdef PRODUCT 2517 #define DECLARE_DEVELOPER_FLAG(type, name, value, doc) const type name = value; 2518 #define DECLARE_PD_DEVELOPER_FLAG(type, name, doc) const type name = pd_##name; 2519 #define DECLARE_NOTPRODUCT_FLAG(type, name, value, doc) const type name = value; 2520 #else 2521 #define DECLARE_DEVELOPER_FLAG(type, name, value, doc) extern "C" type name; 2522 #define DECLARE_PD_DEVELOPER_FLAG(type, name, doc) extern "C" type name; 2523 #define DECLARE_NOTPRODUCT_FLAG(type, name, value, doc) extern "C" type name; 2524 #endif // PRODUCT 2525 // Special LP64 flags, product only needed for now. 2526 #ifdef _LP64 2527 #define DECLARE_LP64_PRODUCT_FLAG(type, name, value, doc) extern "C" type name; 2528 #else 2529 #define DECLARE_LP64_PRODUCT_FLAG(type, name, value, doc) const type name = value; 2530 #endif // _LP64 2531 2532 ALL_FLAGS(DECLARE_DEVELOPER_FLAG, \ 2533 DECLARE_PD_DEVELOPER_FLAG, \ 2534 DECLARE_PRODUCT_FLAG, \ 2535 DECLARE_PD_PRODUCT_FLAG, \ 2536 DECLARE_DIAGNOSTIC_FLAG, \ 2537 DECLARE_PD_DIAGNOSTIC_FLAG, \ 2538 DECLARE_EXPERIMENTAL_FLAG, \ 2539 DECLARE_NOTPRODUCT_FLAG, \ 2540 DECLARE_MANAGEABLE_FLAG, \ 2541 DECLARE_PRODUCT_RW_FLAG, \ 2542 DECLARE_LP64_PRODUCT_FLAG, \ 2543 IGNORE_RANGE, \ 2544 IGNORE_CONSTRAINT) 2545 2546 #endif // SHARE_RUNTIME_GLOBALS_HPP