src/share/vm/runtime/sweeper.hpp

Print this page
rev 4203 : 8008208: Event tracing for code cache subsystems can give wrong timestamps
Reviewed-by:


  39   static int       _marked_count;    // Nof. nmethods marked for reclaim in current sweep
  40 
  41   static volatile int      _invocations;   // No. of invocations left until we are completed with this pass
  42   static volatile int      _sweep_started; // Flag to control conc sweeper
  43 
  44   static bool      _rescan;          // Indicates that we should do a full rescan of the
  45                                      // of the code cache looking for work to do.
  46   static bool      _do_sweep;        // Flag to skip the conc sweep if no stack scan happened
  47   static int       _locked_seen;     // Number of locked nmethods encountered during the scan
  48   static int       _not_entrant_seen_on_stack; // Number of not entrant nmethod were are still on stack
  49 
  50   static bool      _was_full;        // remember if we did emergency unloading
  51   static jint      _advise_to_sweep; // flag to indicate code cache getting full
  52   static jlong     _last_was_full;   // timestamp of last emergency unloading
  53   static uint      _highest_marked;   // highest compile id dumped at last emergency unloading
  54   static long      _was_full_traversal;   // trav number at last emergency unloading
  55 
  56   // Stat counters
  57   static int       _number_of_flushes;           // Total of full traversals caused by full cache
  58   static int       _total_nof_methods_reclaimed; // Accumulated nof methods flushed
  59   static long      _total_time_sweeping;         // Accumulated time sweeping
  60   static long      _total_time_this_sweep;       // Total time this sweep
  61   static long      _peak_sweep_time;             // Peak time for a full sweep
  62   static long      _peak_sweep_fraction_time;    // Peak time sweeping one fraction
  63   static long      _total_disconnect_time;       // Total time cleaning code mem
  64   static long      _peak_disconnect_time;        // Peak time cleaning code mem
  65 
  66   static void process_nmethod(nmethod *nm);
  67 
  68   static void log_sweep(const char* msg, const char* format = NULL, ...);
  69 
  70  public:
  71   static long traversal_count()             { return _traversals; }
  72   static int  number_of_flushes()           { return _number_of_flushes; }
  73   static int  total_nof_methods_reclaimed() { return _total_nof_methods_reclaimed; }
  74   static long total_time_sweeping()         { return _total_time_sweeping; }
  75   static long peak_sweep_time()             { return _peak_sweep_time; }
  76   static long peak_sweep_fraction_time()    { return _peak_sweep_fraction_time; }
  77   static long total_disconnect_time()       { return _total_disconnect_time; }
  78   static long peak_disconnect_time()        { return _peak_disconnect_time; }
  79 
  80 #ifdef ASSERT
  81   // Keep track of sweeper activity in the ring buffer
  82   static void record_sweep(nmethod* nm, int line);
  83   static void report_events(int id, address entry);
  84   static void report_events();
  85 #endif
  86 
  87   static void scan_stacks();      // Invoked at the end of each safepoint
  88   static void sweep_code_cache(); // Concurrent part of sweep job
  89   static void possibly_sweep();   // Compiler threads call this to sweep
  90 
  91   static void notify(nmethod* nm) {
  92     // Perform a full scan of the code cache from the beginning.  No
  93     // need to synchronize the setting of this flag since it only
  94     // changes to false at safepoint so we can never overwrite it with false.
  95      _rescan = true;
  96   }
  97 
  98   static void handle_full_code_cache(bool is_full); // Called by compilers who fail to allocate


  39   static int       _marked_count;    // Nof. nmethods marked for reclaim in current sweep
  40 
  41   static volatile int      _invocations;   // No. of invocations left until we are completed with this pass
  42   static volatile int      _sweep_started; // Flag to control conc sweeper
  43 
  44   static bool      _rescan;          // Indicates that we should do a full rescan of the
  45                                      // of the code cache looking for work to do.
  46   static bool      _do_sweep;        // Flag to skip the conc sweep if no stack scan happened
  47   static int       _locked_seen;     // Number of locked nmethods encountered during the scan
  48   static int       _not_entrant_seen_on_stack; // Number of not entrant nmethod were are still on stack
  49 
  50   static bool      _was_full;        // remember if we did emergency unloading
  51   static jint      _advise_to_sweep; // flag to indicate code cache getting full
  52   static jlong     _last_was_full;   // timestamp of last emergency unloading
  53   static uint      _highest_marked;   // highest compile id dumped at last emergency unloading
  54   static long      _was_full_traversal;   // trav number at last emergency unloading
  55 
  56   // Stat counters
  57   static int       _number_of_flushes;            // Total of full traversals caused by full cache
  58   static int       _total_nof_methods_reclaimed;  // Accumulated nof methods flushed
  59   static jlong     _total_time_sweeping;         // Accumulated time sweeping
  60   static jlong     _total_time_this_sweep;       // Total time this sweep
  61   static jlong     _peak_sweep_time;             // Peak time for a full sweep
  62   static jlong     _peak_sweep_fraction_time;    // Peak time sweeping one fraction
  63   static jlong     _total_disconnect_time;       // Total time cleaning code mem
  64   static jlong     _peak_disconnect_time;        // Peak time cleaning code mem
  65 
  66   static void process_nmethod(nmethod *nm);
  67 
  68   static void log_sweep(const char* msg, const char* format = NULL, ...);
  69 
  70  public:
  71   static long traversal_count()              { return _traversals; }
  72   static int  number_of_flushes()            { return _number_of_flushes; }
  73   static int  total_nof_methods_reclaimed()  { return _total_nof_methods_reclaimed; }
  74   static jlong total_time_sweeping()         { return _total_time_sweeping; }
  75   static jlong peak_sweep_time()             { return _peak_sweep_time; }
  76   static jlong peak_sweep_fraction_time()    { return _peak_sweep_fraction_time; }
  77   static jlong total_disconnect_time()       { return _total_disconnect_time; }
  78   static jlong peak_disconnect_time()        { return _peak_disconnect_time; }
  79 
  80 #ifdef ASSERT
  81   // Keep track of sweeper activity in the ring buffer
  82   static void record_sweep(nmethod* nm, int line);
  83   static void report_events(int id, address entry);
  84   static void report_events();
  85 #endif
  86 
  87   static void scan_stacks();      // Invoked at the end of each safepoint
  88   static void sweep_code_cache(); // Concurrent part of sweep job
  89   static void possibly_sweep();   // Compiler threads call this to sweep
  90 
  91   static void notify(nmethod* nm) {
  92     // Perform a full scan of the code cache from the beginning.  No
  93     // need to synchronize the setting of this flag since it only
  94     // changes to false at safepoint so we can never overwrite it with false.
  95      _rescan = true;
  96   }
  97 
  98   static void handle_full_code_cache(bool is_full); // Called by compilers who fail to allocate