1 /* 2 * Copyright (c) 2000, 2020, Oracle and/or its affiliates. All rights reserved. 3 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. 4 * 5 * This code is free software; you can redistribute it and/or modify it 6 * under the terms of the GNU General Public License version 2 only, as 7 * published by the Free Software Foundation. 8 * 9 * This code is distributed in the hope that it will be useful, but WITHOUT 10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License 12 * version 2 for more details (a copy is included in the LICENSE file that 13 * accompanied this code). 14 * 15 * You should have received a copy of the GNU General Public License version 16 * 2 along with this work; if not, write to the Free Software Foundation, 17 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. 18 * 19 * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA 20 * or visit www.oracle.com if you need additional information or have any 21 * questions. 22 * 23 */ 24 25 #include "precompiled.hpp" 26 #include "compiler/compileLog.hpp" 27 #include "compiler/oopMap.hpp" 28 #include "memory/allocation.inline.hpp" 29 #include "memory/resourceArea.hpp" 30 #include "opto/addnode.hpp" 31 #include "opto/block.hpp" 32 #include "opto/callnode.hpp" 33 #include "opto/cfgnode.hpp" 34 #include "opto/chaitin.hpp" 35 #include "opto/coalesce.hpp" 36 #include "opto/connode.hpp" 37 #include "opto/idealGraphPrinter.hpp" 38 #include "opto/indexSet.hpp" 39 #include "opto/machnode.hpp" 40 #include "opto/memnode.hpp" 41 #include "opto/movenode.hpp" 42 #include "opto/opcodes.hpp" 43 #include "opto/rootnode.hpp" 44 #include "utilities/align.hpp" 45 46 #ifndef PRODUCT 47 void LRG::dump() const { 48 ttyLocker ttyl; 49 tty->print("%d ",num_regs()); 50 _mask.dump(); 51 if( _msize_valid ) { 52 if( mask_size() == compute_mask_size() ) tty->print(", #%d ",_mask_size); 53 else tty->print(", #!!!_%d_vs_%d ",_mask_size,_mask.Size()); 54 } else { 55 tty->print(", #?(%d) ",_mask.Size()); 56 } 57 58 tty->print("EffDeg: "); 59 if( _degree_valid ) tty->print( "%d ", _eff_degree ); 60 else tty->print("? "); 61 62 if( is_multidef() ) { 63 tty->print("MultiDef "); 64 if (_defs != NULL) { 65 tty->print("("); 66 for (int i = 0; i < _defs->length(); i++) { 67 tty->print("N%d ", _defs->at(i)->_idx); 68 } 69 tty->print(") "); 70 } 71 } 72 else if( _def == 0 ) tty->print("Dead "); 73 else tty->print("Def: N%d ",_def->_idx); 74 75 tty->print("Cost:%4.2g Area:%4.2g Score:%4.2g ",_cost,_area, score()); 76 // Flags 77 if( _is_oop ) tty->print("Oop "); 78 if( _is_float ) tty->print("Float "); 79 if( _is_vector ) tty->print("Vector "); 80 if( _is_scalable ) tty->print("Scalable "); 81 if( _was_spilled1 ) tty->print("Spilled "); 82 if( _was_spilled2 ) tty->print("Spilled2 "); 83 if( _direct_conflict ) tty->print("Direct_conflict "); 84 if( _fat_proj ) tty->print("Fat "); 85 if( _was_lo ) tty->print("Lo "); 86 if( _has_copy ) tty->print("Copy "); 87 if( _at_risk ) tty->print("Risk "); 88 89 if( _must_spill ) tty->print("Must_spill "); 90 if( _is_bound ) tty->print("Bound "); 91 if( _msize_valid ) { 92 if( _degree_valid && lo_degree() ) tty->print("Trivial "); 93 } 94 95 tty->cr(); 96 } 97 #endif 98 99 // Compute score from cost and area. Low score is best to spill. 100 static double raw_score( double cost, double area ) { 101 return cost - (area*RegisterCostAreaRatio) * 1.52588e-5; 102 } 103 104 double LRG::score() const { 105 // Scale _area by RegisterCostAreaRatio/64K then subtract from cost. 106 // Bigger area lowers score, encourages spilling this live range. 107 // Bigger cost raise score, prevents spilling this live range. 108 // (Note: 1/65536 is the magic constant below; I dont trust the C optimizer 109 // to turn a divide by a constant into a multiply by the reciprical). 110 double score = raw_score( _cost, _area); 111 112 // Account for area. Basically, LRGs covering large areas are better 113 // to spill because more other LRGs get freed up. 114 if( _area == 0.0 ) // No area? Then no progress to spill 115 return 1e35; 116 117 if( _was_spilled2 ) // If spilled once before, we are unlikely 118 return score + 1e30; // to make progress again. 119 120 if( _cost >= _area*3.0 ) // Tiny area relative to cost 121 return score + 1e17; // Probably no progress to spill 122 123 if( (_cost+_cost) >= _area*3.0 ) // Small area relative to cost 124 return score + 1e10; // Likely no progress to spill 125 126 return score; 127 } 128 129 #define NUMBUCKS 3 130 131 // Straight out of Tarjan's union-find algorithm 132 uint LiveRangeMap::find_compress(uint lrg) { 133 uint cur = lrg; 134 uint next = _uf_map.at(cur); 135 while (next != cur) { // Scan chain of equivalences 136 assert( next < cur, "always union smaller"); 137 cur = next; // until find a fixed-point 138 next = _uf_map.at(cur); 139 } 140 141 // Core of union-find algorithm: update chain of 142 // equivalences to be equal to the root. 143 while (lrg != next) { 144 uint tmp = _uf_map.at(lrg); 145 _uf_map.at_put(lrg, next); 146 lrg = tmp; 147 } 148 return lrg; 149 } 150 151 // Reset the Union-Find map to identity 152 void LiveRangeMap::reset_uf_map(uint max_lrg_id) { 153 _max_lrg_id= max_lrg_id; 154 // Force the Union-Find mapping to be at least this large 155 _uf_map.at_put_grow(_max_lrg_id, 0); 156 // Initialize it to be the ID mapping. 157 for (uint i = 0; i < _max_lrg_id; ++i) { 158 _uf_map.at_put(i, i); 159 } 160 } 161 162 // Make all Nodes map directly to their final live range; no need for 163 // the Union-Find mapping after this call. 164 void LiveRangeMap::compress_uf_map_for_nodes() { 165 // For all Nodes, compress mapping 166 uint unique = _names.length(); 167 for (uint i = 0; i < unique; ++i) { 168 uint lrg = _names.at(i); 169 uint compressed_lrg = find(lrg); 170 if (lrg != compressed_lrg) { 171 _names.at_put(i, compressed_lrg); 172 } 173 } 174 } 175 176 // Like Find above, but no path compress, so bad asymptotic behavior 177 uint LiveRangeMap::find_const(uint lrg) const { 178 if (!lrg) { 179 return lrg; // Ignore the zero LRG 180 } 181 182 // Off the end? This happens during debugging dumps when you got 183 // brand new live ranges but have not told the allocator yet. 184 if (lrg >= _max_lrg_id) { 185 return lrg; 186 } 187 188 uint next = _uf_map.at(lrg); 189 while (next != lrg) { // Scan chain of equivalences 190 assert(next < lrg, "always union smaller"); 191 lrg = next; // until find a fixed-point 192 next = _uf_map.at(lrg); 193 } 194 return next; 195 } 196 197 PhaseChaitin::PhaseChaitin(uint unique, PhaseCFG &cfg, Matcher &matcher, bool scheduling_info_generated) 198 : PhaseRegAlloc(unique, cfg, matcher, 199 #ifndef PRODUCT 200 print_chaitin_statistics 201 #else 202 NULL 203 #endif 204 ) 205 , _live(0) 206 , _lo_degree(0), _lo_stk_degree(0), _hi_degree(0), _simplified(0) 207 , _oldphi(unique) 208 #ifndef PRODUCT 209 , _trace_spilling(C->directive()->TraceSpillingOption) 210 #endif 211 , _lrg_map(Thread::current()->resource_area(), unique) 212 , _scheduling_info_generated(scheduling_info_generated) 213 , _sched_int_pressure(0, INTPRESSURE) 214 , _sched_float_pressure(0, FLOATPRESSURE) 215 , _scratch_int_pressure(0, INTPRESSURE) 216 , _scratch_float_pressure(0, FLOATPRESSURE) 217 { 218 Compile::TracePhase tp("ctorChaitin", &timers[_t_ctorChaitin]); 219 220 _high_frequency_lrg = MIN2(double(OPTO_LRG_HIGH_FREQ), _cfg.get_outer_loop_frequency()); 221 222 // Build a list of basic blocks, sorted by frequency 223 _blks = NEW_RESOURCE_ARRAY(Block *, _cfg.number_of_blocks()); 224 // Experiment with sorting strategies to speed compilation 225 double cutoff = BLOCK_FREQUENCY(1.0); // Cutoff for high frequency bucket 226 Block **buckets[NUMBUCKS]; // Array of buckets 227 uint buckcnt[NUMBUCKS]; // Array of bucket counters 228 double buckval[NUMBUCKS]; // Array of bucket value cutoffs 229 for (uint i = 0; i < NUMBUCKS; i++) { 230 buckets[i] = NEW_RESOURCE_ARRAY(Block *, _cfg.number_of_blocks()); 231 buckcnt[i] = 0; 232 // Bump by three orders of magnitude each time 233 cutoff *= 0.001; 234 buckval[i] = cutoff; 235 for (uint j = 0; j < _cfg.number_of_blocks(); j++) { 236 buckets[i][j] = NULL; 237 } 238 } 239 // Sort blocks into buckets 240 for (uint i = 0; i < _cfg.number_of_blocks(); i++) { 241 for (uint j = 0; j < NUMBUCKS; j++) { 242 if ((j == NUMBUCKS - 1) || (_cfg.get_block(i)->_freq > buckval[j])) { 243 // Assign block to end of list for appropriate bucket 244 buckets[j][buckcnt[j]++] = _cfg.get_block(i); 245 break; // kick out of inner loop 246 } 247 } 248 } 249 // Dump buckets into final block array 250 uint blkcnt = 0; 251 for (uint i = 0; i < NUMBUCKS; i++) { 252 for (uint j = 0; j < buckcnt[i]; j++) { 253 _blks[blkcnt++] = buckets[i][j]; 254 } 255 } 256 257 assert(blkcnt == _cfg.number_of_blocks(), "Block array not totally filled"); 258 } 259 260 // union 2 sets together. 261 void PhaseChaitin::Union( const Node *src_n, const Node *dst_n ) { 262 uint src = _lrg_map.find(src_n); 263 uint dst = _lrg_map.find(dst_n); 264 assert(src, ""); 265 assert(dst, ""); 266 assert(src < _lrg_map.max_lrg_id(), "oob"); 267 assert(dst < _lrg_map.max_lrg_id(), "oob"); 268 assert(src < dst, "always union smaller"); 269 _lrg_map.uf_map(dst, src); 270 } 271 272 void PhaseChaitin::new_lrg(const Node *x, uint lrg) { 273 // Make the Node->LRG mapping 274 _lrg_map.extend(x->_idx,lrg); 275 // Make the Union-Find mapping an identity function 276 _lrg_map.uf_extend(lrg, lrg); 277 } 278 279 280 int PhaseChaitin::clone_projs(Block* b, uint idx, Node* orig, Node* copy, uint& max_lrg_id) { 281 assert(b->find_node(copy) == (idx - 1), "incorrect insert index for copy kill projections"); 282 DEBUG_ONLY( Block* borig = _cfg.get_block_for_node(orig); ) 283 int found_projs = 0; 284 uint cnt = orig->outcnt(); 285 for (uint i = 0; i < cnt; i++) { 286 Node* proj = orig->raw_out(i); 287 if (proj->is_MachProj()) { 288 assert(proj->outcnt() == 0, "only kill projections are expected here"); 289 assert(_cfg.get_block_for_node(proj) == borig, "incorrect block for kill projections"); 290 found_projs++; 291 // Copy kill projections after the cloned node 292 Node* kills = proj->clone(); 293 kills->set_req(0, copy); 294 b->insert_node(kills, idx++); 295 _cfg.map_node_to_block(kills, b); 296 new_lrg(kills, max_lrg_id++); 297 } 298 } 299 return found_projs; 300 } 301 302 // Renumber the live ranges to compact them. Makes the IFG smaller. 303 void PhaseChaitin::compact() { 304 Compile::TracePhase tp("chaitinCompact", &timers[_t_chaitinCompact]); 305 306 // Current the _uf_map contains a series of short chains which are headed 307 // by a self-cycle. All the chains run from big numbers to little numbers. 308 // The Find() call chases the chains & shortens them for the next Find call. 309 // We are going to change this structure slightly. Numbers above a moving 310 // wave 'i' are unchanged. Numbers below 'j' point directly to their 311 // compacted live range with no further chaining. There are no chains or 312 // cycles below 'i', so the Find call no longer works. 313 uint j=1; 314 uint i; 315 for (i = 1; i < _lrg_map.max_lrg_id(); i++) { 316 uint lr = _lrg_map.uf_live_range_id(i); 317 // Ignore unallocated live ranges 318 if (!lr) { 319 continue; 320 } 321 assert(lr <= i, ""); 322 _lrg_map.uf_map(i, ( lr == i ) ? j++ : _lrg_map.uf_live_range_id(lr)); 323 } 324 // Now change the Node->LR mapping to reflect the compacted names 325 uint unique = _lrg_map.size(); 326 for (i = 0; i < unique; i++) { 327 uint lrg_id = _lrg_map.live_range_id(i); 328 _lrg_map.map(i, _lrg_map.uf_live_range_id(lrg_id)); 329 } 330 331 // Reset the Union-Find mapping 332 _lrg_map.reset_uf_map(j); 333 } 334 335 void PhaseChaitin::Register_Allocate() { 336 337 // Above the OLD FP (and in registers) are the incoming arguments. Stack 338 // slots in this area are called "arg_slots". Above the NEW FP (and in 339 // registers) is the outgoing argument area; above that is the spill/temp 340 // area. These are all "frame_slots". Arg_slots start at the zero 341 // stack_slots and count up to the known arg_size. Frame_slots start at 342 // the stack_slot #arg_size and go up. After allocation I map stack 343 // slots to actual offsets. Stack-slots in the arg_slot area are biased 344 // by the frame_size; stack-slots in the frame_slot area are biased by 0. 345 346 _trip_cnt = 0; 347 _alternate = 0; 348 _matcher._allocation_started = true; 349 350 ResourceArea split_arena(mtCompiler); // Arena for Split local resources 351 ResourceArea live_arena(mtCompiler); // Arena for liveness & IFG info 352 ResourceMark rm(&live_arena); 353 354 // Need live-ness for the IFG; need the IFG for coalescing. If the 355 // liveness is JUST for coalescing, then I can get some mileage by renaming 356 // all copy-related live ranges low and then using the max copy-related 357 // live range as a cut-off for LIVE and the IFG. In other words, I can 358 // build a subset of LIVE and IFG just for copies. 359 PhaseLive live(_cfg, _lrg_map.names(), &live_arena, false); 360 361 // Need IFG for coalescing and coloring 362 PhaseIFG ifg(&live_arena); 363 _ifg = &ifg; 364 365 // Come out of SSA world to the Named world. Assign (virtual) registers to 366 // Nodes. Use the same register for all inputs and the output of PhiNodes 367 // - effectively ending SSA form. This requires either coalescing live 368 // ranges or inserting copies. For the moment, we insert "virtual copies" 369 // - we pretend there is a copy prior to each Phi in predecessor blocks. 370 // We will attempt to coalesce such "virtual copies" before we manifest 371 // them for real. 372 de_ssa(); 373 374 #ifdef ASSERT 375 // Veify the graph before RA. 376 verify(&live_arena); 377 #endif 378 379 { 380 Compile::TracePhase tp("computeLive", &timers[_t_computeLive]); 381 _live = NULL; // Mark live as being not available 382 rm.reset_to_mark(); // Reclaim working storage 383 IndexSet::reset_memory(C, &live_arena); 384 ifg.init(_lrg_map.max_lrg_id()); // Empty IFG 385 gather_lrg_masks( false ); // Collect LRG masks 386 live.compute(_lrg_map.max_lrg_id()); // Compute liveness 387 _live = &live; // Mark LIVE as being available 388 } 389 390 // Base pointers are currently "used" by instructions which define new 391 // derived pointers. This makes base pointers live up to the where the 392 // derived pointer is made, but not beyond. Really, they need to be live 393 // across any GC point where the derived value is live. So this code looks 394 // at all the GC points, and "stretches" the live range of any base pointer 395 // to the GC point. 396 if (stretch_base_pointer_live_ranges(&live_arena)) { 397 Compile::TracePhase tp("computeLive (sbplr)", &timers[_t_computeLive]); 398 // Since some live range stretched, I need to recompute live 399 _live = NULL; 400 rm.reset_to_mark(); // Reclaim working storage 401 IndexSet::reset_memory(C, &live_arena); 402 ifg.init(_lrg_map.max_lrg_id()); 403 gather_lrg_masks(false); 404 live.compute(_lrg_map.max_lrg_id()); 405 _live = &live; 406 } 407 // Create the interference graph using virtual copies 408 build_ifg_virtual(); // Include stack slots this time 409 410 // The IFG is/was triangular. I am 'squaring it up' so Union can run 411 // faster. Union requires a 'for all' operation which is slow on the 412 // triangular adjacency matrix (quick reminder: the IFG is 'sparse' - 413 // meaning I can visit all the Nodes neighbors less than a Node in time 414 // O(# of neighbors), but I have to visit all the Nodes greater than a 415 // given Node and search them for an instance, i.e., time O(#MaxLRG)). 416 _ifg->SquareUp(); 417 418 // Aggressive (but pessimistic) copy coalescing. 419 // This pass works on virtual copies. Any virtual copies which are not 420 // coalesced get manifested as actual copies 421 { 422 Compile::TracePhase tp("chaitinCoalesce1", &timers[_t_chaitinCoalesce1]); 423 424 PhaseAggressiveCoalesce coalesce(*this); 425 coalesce.coalesce_driver(); 426 // Insert un-coalesced copies. Visit all Phis. Where inputs to a Phi do 427 // not match the Phi itself, insert a copy. 428 coalesce.insert_copies(_matcher); 429 if (C->failing()) { 430 return; 431 } 432 } 433 434 // After aggressive coalesce, attempt a first cut at coloring. 435 // To color, we need the IFG and for that we need LIVE. 436 { 437 Compile::TracePhase tp("computeLive", &timers[_t_computeLive]); 438 _live = NULL; 439 rm.reset_to_mark(); // Reclaim working storage 440 IndexSet::reset_memory(C, &live_arena); 441 ifg.init(_lrg_map.max_lrg_id()); 442 gather_lrg_masks( true ); 443 live.compute(_lrg_map.max_lrg_id()); 444 _live = &live; 445 } 446 447 // Build physical interference graph 448 uint must_spill = 0; 449 must_spill = build_ifg_physical(&live_arena); 450 // If we have a guaranteed spill, might as well spill now 451 if (must_spill) { 452 if(!_lrg_map.max_lrg_id()) { 453 return; 454 } 455 // Bail out if unique gets too large (ie - unique > MaxNodeLimit) 456 C->check_node_count(10*must_spill, "out of nodes before split"); 457 if (C->failing()) { 458 return; 459 } 460 461 uint new_max_lrg_id = Split(_lrg_map.max_lrg_id(), &split_arena); // Split spilling LRG everywhere 462 _lrg_map.set_max_lrg_id(new_max_lrg_id); 463 // Bail out if unique gets too large (ie - unique > MaxNodeLimit - 2*NodeLimitFudgeFactor) 464 // or we failed to split 465 C->check_node_count(2*NodeLimitFudgeFactor, "out of nodes after physical split"); 466 if (C->failing()) { 467 return; 468 } 469 470 NOT_PRODUCT(C->verify_graph_edges();) 471 472 compact(); // Compact LRGs; return new lower max lrg 473 474 { 475 Compile::TracePhase tp("computeLive", &timers[_t_computeLive]); 476 _live = NULL; 477 rm.reset_to_mark(); // Reclaim working storage 478 IndexSet::reset_memory(C, &live_arena); 479 ifg.init(_lrg_map.max_lrg_id()); // Build a new interference graph 480 gather_lrg_masks( true ); // Collect intersect mask 481 live.compute(_lrg_map.max_lrg_id()); // Compute LIVE 482 _live = &live; 483 } 484 build_ifg_physical(&live_arena); 485 _ifg->SquareUp(); 486 _ifg->Compute_Effective_Degree(); 487 // Only do conservative coalescing if requested 488 if (OptoCoalesce) { 489 Compile::TracePhase tp("chaitinCoalesce2", &timers[_t_chaitinCoalesce2]); 490 // Conservative (and pessimistic) copy coalescing of those spills 491 PhaseConservativeCoalesce coalesce(*this); 492 // If max live ranges greater than cutoff, don't color the stack. 493 // This cutoff can be larger than below since it is only done once. 494 coalesce.coalesce_driver(); 495 } 496 _lrg_map.compress_uf_map_for_nodes(); 497 498 #ifdef ASSERT 499 verify(&live_arena, true); 500 #endif 501 } else { 502 ifg.SquareUp(); 503 ifg.Compute_Effective_Degree(); 504 #ifdef ASSERT 505 set_was_low(); 506 #endif 507 } 508 509 // Prepare for Simplify & Select 510 cache_lrg_info(); // Count degree of LRGs 511 512 // Simplify the InterFerence Graph by removing LRGs of low degree. 513 // LRGs of low degree are trivially colorable. 514 Simplify(); 515 516 // Select colors by re-inserting LRGs back into the IFG in reverse order. 517 // Return whether or not something spills. 518 uint spills = Select( ); 519 520 // If we spill, split and recycle the entire thing 521 while( spills ) { 522 if( _trip_cnt++ > 24 ) { 523 DEBUG_ONLY( dump_for_spill_split_recycle(); ) 524 if( _trip_cnt > 27 ) { 525 C->record_method_not_compilable("failed spill-split-recycle sanity check"); 526 return; 527 } 528 } 529 530 if (!_lrg_map.max_lrg_id()) { 531 return; 532 } 533 uint new_max_lrg_id = Split(_lrg_map.max_lrg_id(), &split_arena); // Split spilling LRG everywhere 534 _lrg_map.set_max_lrg_id(new_max_lrg_id); 535 // Bail out if unique gets too large (ie - unique > MaxNodeLimit - 2*NodeLimitFudgeFactor) 536 C->check_node_count(2 * NodeLimitFudgeFactor, "out of nodes after split"); 537 if (C->failing()) { 538 return; 539 } 540 541 compact(); // Compact LRGs; return new lower max lrg 542 543 // Nuke the live-ness and interference graph and LiveRanGe info 544 { 545 Compile::TracePhase tp("computeLive", &timers[_t_computeLive]); 546 _live = NULL; 547 rm.reset_to_mark(); // Reclaim working storage 548 IndexSet::reset_memory(C, &live_arena); 549 ifg.init(_lrg_map.max_lrg_id()); 550 551 // Create LiveRanGe array. 552 // Intersect register masks for all USEs and DEFs 553 gather_lrg_masks(true); 554 live.compute(_lrg_map.max_lrg_id()); 555 _live = &live; 556 } 557 must_spill = build_ifg_physical(&live_arena); 558 _ifg->SquareUp(); 559 _ifg->Compute_Effective_Degree(); 560 561 // Only do conservative coalescing if requested 562 if (OptoCoalesce) { 563 Compile::TracePhase tp("chaitinCoalesce3", &timers[_t_chaitinCoalesce3]); 564 // Conservative (and pessimistic) copy coalescing 565 PhaseConservativeCoalesce coalesce(*this); 566 // Check for few live ranges determines how aggressive coalesce is. 567 coalesce.coalesce_driver(); 568 } 569 _lrg_map.compress_uf_map_for_nodes(); 570 #ifdef ASSERT 571 verify(&live_arena, true); 572 #endif 573 cache_lrg_info(); // Count degree of LRGs 574 575 // Simplify the InterFerence Graph by removing LRGs of low degree. 576 // LRGs of low degree are trivially colorable. 577 Simplify(); 578 579 // Select colors by re-inserting LRGs back into the IFG in reverse order. 580 // Return whether or not something spills. 581 spills = Select(); 582 } 583 584 // Count number of Simplify-Select trips per coloring success. 585 _allocator_attempts += _trip_cnt + 1; 586 _allocator_successes += 1; 587 588 // Peephole remove copies 589 post_allocate_copy_removal(); 590 591 // Merge multidefs if multiple defs representing the same value are used in a single block. 592 merge_multidefs(); 593 594 #ifdef ASSERT 595 // Veify the graph after RA. 596 verify(&live_arena); 597 #endif 598 599 // max_reg is past the largest *register* used. 600 // Convert that to a frame_slot number. 601 if (_max_reg <= _matcher._new_SP) { 602 _framesize = C->out_preserve_stack_slots(); 603 } 604 else { 605 _framesize = _max_reg -_matcher._new_SP; 606 } 607 assert((int)(_matcher._new_SP+_framesize) >= (int)_matcher._out_arg_limit, "framesize must be large enough"); 608 609 // This frame must preserve the required fp alignment 610 _framesize = align_up(_framesize, Matcher::stack_alignment_in_slots()); 611 assert(_framesize <= 1000000, "sanity check"); 612 #ifndef PRODUCT 613 _total_framesize += _framesize; 614 if ((int)_framesize > _max_framesize) { 615 _max_framesize = _framesize; 616 } 617 #endif 618 619 // Convert CISC spills 620 fixup_spills(); 621 622 // Log regalloc results 623 CompileLog* log = Compile::current()->log(); 624 if (log != NULL) { 625 log->elem("regalloc attempts='%d' success='%d'", _trip_cnt, !C->failing()); 626 } 627 628 if (C->failing()) { 629 return; 630 } 631 632 NOT_PRODUCT(C->verify_graph_edges();) 633 634 // Move important info out of the live_arena to longer lasting storage. 635 alloc_node_regs(_lrg_map.size()); 636 for (uint i=0; i < _lrg_map.size(); i++) { 637 if (_lrg_map.live_range_id(i)) { // Live range associated with Node? 638 LRG &lrg = lrgs(_lrg_map.live_range_id(i)); 639 if (!lrg.alive()) { 640 set_bad(i); 641 } else if (lrg.num_regs() == 1) { 642 set1(i, lrg.reg()); 643 } else { // Must be a register-set 644 if (!lrg._fat_proj) { // Must be aligned adjacent register set 645 // Live ranges record the highest register in their mask. 646 // We want the low register for the AD file writer's convenience. 647 OptoReg::Name hi = lrg.reg(); // Get hi register 648 int num_regs = lrg.num_regs(); 649 if (lrg.is_scalable() && OptoReg::is_stack(hi)) { 650 // For scalable vector registers, when they are allocated in physical 651 // registers, num_regs is RegMask::SlotsPerVecA for reg mask of scalable 652 // vector. If they are allocated on stack, we need to get the actual 653 // num_regs, which reflects the physical length of scalable registers. 654 num_regs = lrg.scalable_reg_slots(); 655 } 656 OptoReg::Name lo = OptoReg::add(hi, (1-num_regs)); // Find lo 657 // We have to use pair [lo,lo+1] even for wide vectors because 658 // the rest of code generation works only with pairs. It is safe 659 // since for registers encoding only 'lo' is used. 660 // Second reg from pair is used in ScheduleAndBundle on SPARC where 661 // vector max size is 8 which corresponds to registers pair. 662 // It is also used in BuildOopMaps but oop operations are not 663 // vectorized. 664 set2(i, lo); 665 } else { // Misaligned; extract 2 bits 666 OptoReg::Name hi = lrg.reg(); // Get hi register 667 lrg.Remove(hi); // Yank from mask 668 int lo = lrg.mask().find_first_elem(); // Find lo 669 set_pair(i, hi, lo); 670 } 671 } 672 if( lrg._is_oop ) _node_oops.set(i); 673 } else { 674 set_bad(i); 675 } 676 } 677 678 // Done! 679 _live = NULL; 680 _ifg = NULL; 681 C->set_indexSet_arena(NULL); // ResourceArea is at end of scope 682 } 683 684 void PhaseChaitin::de_ssa() { 685 // Set initial Names for all Nodes. Most Nodes get the virtual register 686 // number. A few get the ZERO live range number. These do not 687 // get allocated, but instead rely on correct scheduling to ensure that 688 // only one instance is simultaneously live at a time. 689 uint lr_counter = 1; 690 for( uint i = 0; i < _cfg.number_of_blocks(); i++ ) { 691 Block* block = _cfg.get_block(i); 692 uint cnt = block->number_of_nodes(); 693 694 // Handle all the normal Nodes in the block 695 for( uint j = 0; j < cnt; j++ ) { 696 Node *n = block->get_node(j); 697 // Pre-color to the zero live range, or pick virtual register 698 const RegMask &rm = n->out_RegMask(); 699 _lrg_map.map(n->_idx, rm.is_NotEmpty() ? lr_counter++ : 0); 700 } 701 } 702 703 // Reset the Union-Find mapping to be identity 704 _lrg_map.reset_uf_map(lr_counter); 705 } 706 707 void PhaseChaitin::mark_ssa() { 708 // Use ssa names to populate the live range maps or if no mask 709 // is available, use the 0 entry. 710 uint max_idx = 0; 711 for ( uint i = 0; i < _cfg.number_of_blocks(); i++ ) { 712 Block* block = _cfg.get_block(i); 713 uint cnt = block->number_of_nodes(); 714 715 // Handle all the normal Nodes in the block 716 for ( uint j = 0; j < cnt; j++ ) { 717 Node *n = block->get_node(j); 718 // Pre-color to the zero live range, or pick virtual register 719 const RegMask &rm = n->out_RegMask(); 720 _lrg_map.map(n->_idx, rm.is_NotEmpty() ? n->_idx : 0); 721 max_idx = (n->_idx > max_idx) ? n->_idx : max_idx; 722 } 723 } 724 _lrg_map.set_max_lrg_id(max_idx+1); 725 726 // Reset the Union-Find mapping to be identity 727 _lrg_map.reset_uf_map(max_idx+1); 728 } 729 730 731 // Gather LiveRanGe information, including register masks. Modification of 732 // cisc spillable in_RegMasks should not be done before AggressiveCoalesce. 733 void PhaseChaitin::gather_lrg_masks( bool after_aggressive ) { 734 735 // Nail down the frame pointer live range 736 uint fp_lrg = _lrg_map.live_range_id(_cfg.get_root_node()->in(1)->in(TypeFunc::FramePtr)); 737 lrgs(fp_lrg)._cost += 1e12; // Cost is infinite 738 739 // For all blocks 740 for (uint i = 0; i < _cfg.number_of_blocks(); i++) { 741 Block* block = _cfg.get_block(i); 742 743 // For all instructions 744 for (uint j = 1; j < block->number_of_nodes(); j++) { 745 Node* n = block->get_node(j); 746 uint input_edge_start =1; // Skip control most nodes 747 bool is_machine_node = false; 748 if (n->is_Mach()) { 749 is_machine_node = true; 750 input_edge_start = n->as_Mach()->oper_input_base(); 751 } 752 uint idx = n->is_Copy(); 753 754 // Get virtual register number, same as LiveRanGe index 755 uint vreg = _lrg_map.live_range_id(n); 756 LRG& lrg = lrgs(vreg); 757 if (vreg) { // No vreg means un-allocable (e.g. memory) 758 759 // Check for float-vs-int live range (used in register-pressure 760 // calculations) 761 const Type *n_type = n->bottom_type(); 762 if (n_type->is_floatingpoint()) { 763 lrg._is_float = 1; 764 } 765 766 // Check for twice prior spilling. Once prior spilling might have 767 // spilled 'soft', 2nd prior spill should have spilled 'hard' and 768 // further spilling is unlikely to make progress. 769 if (_spilled_once.test(n->_idx)) { 770 lrg._was_spilled1 = 1; 771 if (_spilled_twice.test(n->_idx)) { 772 lrg._was_spilled2 = 1; 773 } 774 } 775 776 #ifndef PRODUCT 777 // Collect bits not used by product code, but which may be useful for 778 // debugging. 779 780 // Collect has-copy bit 781 if (idx) { 782 lrg._has_copy = 1; 783 uint clidx = _lrg_map.live_range_id(n->in(idx)); 784 LRG& copy_src = lrgs(clidx); 785 copy_src._has_copy = 1; 786 } 787 788 if (trace_spilling() && lrg._def != NULL) { 789 // collect defs for MultiDef printing 790 if (lrg._defs == NULL) { 791 lrg._defs = new (_ifg->_arena) GrowableArray<Node*>(_ifg->_arena, 2, 0, NULL); 792 lrg._defs->append(lrg._def); 793 } 794 lrg._defs->append(n); 795 } 796 #endif 797 798 // Check for a single def LRG; these can spill nicely 799 // via rematerialization. Flag as NULL for no def found 800 // yet, or 'n' for single def or -1 for many defs. 801 lrg._def = lrg._def ? NodeSentinel : n; 802 803 // Limit result register mask to acceptable registers 804 const RegMask &rm = n->out_RegMask(); 805 lrg.AND( rm ); 806 807 uint ireg = n->ideal_reg(); 808 assert( !n->bottom_type()->isa_oop_ptr() || ireg == Op_RegP, 809 "oops must be in Op_RegP's" ); 810 811 // Check for vector live range (only if vector register is used). 812 // On SPARC vector uses RegD which could be misaligned so it is not 813 // processes as vector in RA. 814 if (RegMask::is_vector(ireg)) { 815 lrg._is_vector = 1; 816 if (ireg == Op_VecA) { 817 assert(Matcher::supports_scalable_vector(), "scalable vector should be supported"); 818 lrg._is_scalable = 1; 819 // For scalable vector, when it is allocated in physical register, 820 // num_regs is RegMask::SlotsPerVecA for reg mask, 821 // which may not be the actual physical register size. 822 // If it is allocated in stack, we need to get the actual 823 // physical length of scalable vector register. 824 lrg.set_scalable_reg_slots(Matcher::scalable_vector_reg_size(T_FLOAT)); 825 } 826 } 827 assert(n_type->isa_vect() == NULL || lrg._is_vector || ireg == Op_RegD || ireg == Op_RegL, 828 "vector must be in vector registers"); 829 830 // Check for bound register masks 831 const RegMask &lrgmask = lrg.mask(); 832 if (lrgmask.is_bound(ireg)) { 833 lrg._is_bound = 1; 834 } 835 836 // Check for maximum frequency value 837 if (lrg._maxfreq < block->_freq) { 838 lrg._maxfreq = block->_freq; 839 } 840 841 // Check for oop-iness, or long/double 842 // Check for multi-kill projection 843 switch (ireg) { 844 case MachProjNode::fat_proj: 845 // Fat projections have size equal to number of registers killed 846 lrg.set_num_regs(rm.Size()); 847 lrg.set_reg_pressure(lrg.num_regs()); 848 lrg._fat_proj = 1; 849 lrg._is_bound = 1; 850 break; 851 case Op_RegP: 852 #ifdef _LP64 853 lrg.set_num_regs(2); // Size is 2 stack words 854 #else 855 lrg.set_num_regs(1); // Size is 1 stack word 856 #endif 857 // Register pressure is tracked relative to the maximum values 858 // suggested for that platform, INTPRESSURE and FLOATPRESSURE, 859 // and relative to other types which compete for the same regs. 860 // 861 // The following table contains suggested values based on the 862 // architectures as defined in each .ad file. 863 // INTPRESSURE and FLOATPRESSURE may be tuned differently for 864 // compile-speed or performance. 865 // Note1: 866 // SPARC and SPARCV9 reg_pressures are at 2 instead of 1 867 // since .ad registers are defined as high and low halves. 868 // These reg_pressure values remain compatible with the code 869 // in is_high_pressure() which relates get_invalid_mask_size(), 870 // Block::_reg_pressure and INTPRESSURE, FLOATPRESSURE. 871 // Note2: 872 // SPARC -d32 has 24 registers available for integral values, 873 // but only 10 of these are safe for 64-bit longs. 874 // Using set_reg_pressure(2) for both int and long means 875 // the allocator will believe it can fit 26 longs into 876 // registers. Using 2 for longs and 1 for ints means the 877 // allocator will attempt to put 52 integers into registers. 878 // The settings below limit this problem to methods with 879 // many long values which are being run on 32-bit SPARC. 880 // 881 // ------------------- reg_pressure -------------------- 882 // Each entry is reg_pressure_per_value,number_of_regs 883 // RegL RegI RegFlags RegF RegD INTPRESSURE FLOATPRESSURE 884 // IA32 2 1 1 1 1 6 6 885 // IA64 1 1 1 1 1 50 41 886 // SPARC 2 2 2 2 2 48 (24) 52 (26) 887 // SPARCV9 2 2 2 2 2 48 (24) 52 (26) 888 // AMD64 1 1 1 1 1 14 15 889 // ----------------------------------------------------- 890 lrg.set_reg_pressure(1); // normally one value per register 891 if( n_type->isa_oop_ptr() ) { 892 lrg._is_oop = 1; 893 } 894 break; 895 case Op_RegL: // Check for long or double 896 case Op_RegD: 897 lrg.set_num_regs(2); 898 // Define platform specific register pressure 899 #if defined(ARM32) 900 lrg.set_reg_pressure(2); 901 #elif defined(IA32) 902 if( ireg == Op_RegL ) { 903 lrg.set_reg_pressure(2); 904 } else { 905 lrg.set_reg_pressure(1); 906 } 907 #else 908 lrg.set_reg_pressure(1); // normally one value per register 909 #endif 910 // If this def of a double forces a mis-aligned double, 911 // flag as '_fat_proj' - really flag as allowing misalignment 912 // AND changes how we count interferences. A mis-aligned 913 // double can interfere with TWO aligned pairs, or effectively 914 // FOUR registers! 915 if (rm.is_misaligned_pair()) { 916 lrg._fat_proj = 1; 917 lrg._is_bound = 1; 918 } 919 break; 920 case Op_RegF: 921 case Op_RegI: 922 case Op_RegN: 923 case Op_RegFlags: 924 case 0: // not an ideal register 925 lrg.set_num_regs(1); 926 lrg.set_reg_pressure(1); 927 break; 928 case Op_VecA: 929 assert(Matcher::supports_scalable_vector(), "does not support scalable vector"); 930 assert(RegMask::num_registers(Op_VecA) == RegMask::SlotsPerVecA, "sanity"); 931 assert(lrgmask.is_aligned_sets(RegMask::SlotsPerVecA), "vector should be aligned"); 932 lrg.set_num_regs(RegMask::SlotsPerVecA); 933 lrg.set_reg_pressure(1); 934 break; 935 case Op_VecS: 936 assert(Matcher::vector_size_supported(T_BYTE,4), "sanity"); 937 assert(RegMask::num_registers(Op_VecS) == RegMask::SlotsPerVecS, "sanity"); 938 lrg.set_num_regs(RegMask::SlotsPerVecS); 939 lrg.set_reg_pressure(1); 940 break; 941 case Op_VecD: 942 assert(Matcher::vector_size_supported(T_FLOAT,RegMask::SlotsPerVecD), "sanity"); 943 assert(RegMask::num_registers(Op_VecD) == RegMask::SlotsPerVecD, "sanity"); 944 assert(lrgmask.is_aligned_sets(RegMask::SlotsPerVecD), "vector should be aligned"); 945 lrg.set_num_regs(RegMask::SlotsPerVecD); 946 lrg.set_reg_pressure(1); 947 break; 948 case Op_VecX: 949 assert(Matcher::vector_size_supported(T_FLOAT,RegMask::SlotsPerVecX), "sanity"); 950 assert(RegMask::num_registers(Op_VecX) == RegMask::SlotsPerVecX, "sanity"); 951 assert(lrgmask.is_aligned_sets(RegMask::SlotsPerVecX), "vector should be aligned"); 952 lrg.set_num_regs(RegMask::SlotsPerVecX); 953 lrg.set_reg_pressure(1); 954 break; 955 case Op_VecY: 956 assert(Matcher::vector_size_supported(T_FLOAT,RegMask::SlotsPerVecY), "sanity"); 957 assert(RegMask::num_registers(Op_VecY) == RegMask::SlotsPerVecY, "sanity"); 958 assert(lrgmask.is_aligned_sets(RegMask::SlotsPerVecY), "vector should be aligned"); 959 lrg.set_num_regs(RegMask::SlotsPerVecY); 960 lrg.set_reg_pressure(1); 961 break; 962 case Op_VecZ: 963 assert(Matcher::vector_size_supported(T_FLOAT,RegMask::SlotsPerVecZ), "sanity"); 964 assert(RegMask::num_registers(Op_VecZ) == RegMask::SlotsPerVecZ, "sanity"); 965 assert(lrgmask.is_aligned_sets(RegMask::SlotsPerVecZ), "vector should be aligned"); 966 lrg.set_num_regs(RegMask::SlotsPerVecZ); 967 lrg.set_reg_pressure(1); 968 break; 969 default: 970 ShouldNotReachHere(); 971 } 972 } 973 974 // Now do the same for inputs 975 uint cnt = n->req(); 976 // Setup for CISC SPILLING 977 uint inp = (uint)AdlcVMDeps::Not_cisc_spillable; 978 if( UseCISCSpill && after_aggressive ) { 979 inp = n->cisc_operand(); 980 if( inp != (uint)AdlcVMDeps::Not_cisc_spillable ) 981 // Convert operand number to edge index number 982 inp = n->as_Mach()->operand_index(inp); 983 } 984 985 // Prepare register mask for each input 986 for( uint k = input_edge_start; k < cnt; k++ ) { 987 uint vreg = _lrg_map.live_range_id(n->in(k)); 988 if (!vreg) { 989 continue; 990 } 991 992 // If this instruction is CISC Spillable, add the flags 993 // bit to its appropriate input 994 if( UseCISCSpill && after_aggressive && inp == k ) { 995 #ifndef PRODUCT 996 if( TraceCISCSpill ) { 997 tty->print(" use_cisc_RegMask: "); 998 n->dump(); 999 } 1000 #endif 1001 n->as_Mach()->use_cisc_RegMask(); 1002 } 1003 1004 if (is_machine_node && _scheduling_info_generated) { 1005 MachNode* cur_node = n->as_Mach(); 1006 // this is cleaned up by register allocation 1007 if (k >= cur_node->num_opnds()) continue; 1008 } 1009 1010 LRG &lrg = lrgs(vreg); 1011 // // Testing for floating point code shape 1012 // Node *test = n->in(k); 1013 // if( test->is_Mach() ) { 1014 // MachNode *m = test->as_Mach(); 1015 // int op = m->ideal_Opcode(); 1016 // if (n->is_Call() && (op == Op_AddF || op == Op_MulF) ) { 1017 // int zzz = 1; 1018 // } 1019 // } 1020 1021 // Limit result register mask to acceptable registers. 1022 // Do not limit registers from uncommon uses before 1023 // AggressiveCoalesce. This effectively pre-virtual-splits 1024 // around uncommon uses of common defs. 1025 const RegMask &rm = n->in_RegMask(k); 1026 if (!after_aggressive && _cfg.get_block_for_node(n->in(k))->_freq > 1000 * block->_freq) { 1027 // Since we are BEFORE aggressive coalesce, leave the register 1028 // mask untrimmed by the call. This encourages more coalescing. 1029 // Later, AFTER aggressive, this live range will have to spill 1030 // but the spiller handles slow-path calls very nicely. 1031 } else { 1032 lrg.AND( rm ); 1033 } 1034 1035 // Check for bound register masks 1036 const RegMask &lrgmask = lrg.mask(); 1037 uint kreg = n->in(k)->ideal_reg(); 1038 bool is_vect = RegMask::is_vector(kreg); 1039 assert(n->in(k)->bottom_type()->isa_vect() == NULL || 1040 is_vect || kreg == Op_RegD || kreg == Op_RegL, 1041 "vector must be in vector registers"); 1042 if (lrgmask.is_bound(kreg)) 1043 lrg._is_bound = 1; 1044 1045 // If this use of a double forces a mis-aligned double, 1046 // flag as '_fat_proj' - really flag as allowing misalignment 1047 // AND changes how we count interferences. A mis-aligned 1048 // double can interfere with TWO aligned pairs, or effectively 1049 // FOUR registers! 1050 #ifdef ASSERT 1051 if (is_vect && !_scheduling_info_generated) { 1052 if (lrg.num_regs() != 0) { 1053 assert(lrgmask.is_aligned_sets(lrg.num_regs()), "vector should be aligned"); 1054 assert(!lrg._fat_proj, "sanity"); 1055 assert(RegMask::num_registers(kreg) == lrg.num_regs(), "sanity"); 1056 } else { 1057 assert(n->is_Phi(), "not all inputs processed only if Phi"); 1058 } 1059 } 1060 #endif 1061 if (!is_vect && lrg.num_regs() == 2 && !lrg._fat_proj && rm.is_misaligned_pair()) { 1062 lrg._fat_proj = 1; 1063 lrg._is_bound = 1; 1064 } 1065 // if the LRG is an unaligned pair, we will have to spill 1066 // so clear the LRG's register mask if it is not already spilled 1067 if (!is_vect && !n->is_SpillCopy() && 1068 (lrg._def == NULL || lrg.is_multidef() || !lrg._def->is_SpillCopy()) && 1069 lrgmask.is_misaligned_pair()) { 1070 lrg.Clear(); 1071 } 1072 1073 // Check for maximum frequency value 1074 if (lrg._maxfreq < block->_freq) { 1075 lrg._maxfreq = block->_freq; 1076 } 1077 1078 } // End for all allocated inputs 1079 } // end for all instructions 1080 } // end for all blocks 1081 1082 // Final per-liverange setup 1083 for (uint i2 = 0; i2 < _lrg_map.max_lrg_id(); i2++) { 1084 LRG &lrg = lrgs(i2); 1085 assert(!lrg._is_vector || !lrg._fat_proj, "sanity"); 1086 if (lrg.num_regs() > 1 && !lrg._fat_proj) { 1087 lrg.clear_to_sets(); 1088 } 1089 lrg.compute_set_mask_size(); 1090 if (lrg.not_free()) { // Handle case where we lose from the start 1091 lrg.set_reg(OptoReg::Name(LRG::SPILL_REG)); 1092 lrg._direct_conflict = 1; 1093 } 1094 lrg.set_degree(0); // no neighbors in IFG yet 1095 } 1096 } 1097 1098 // Set the was-lo-degree bit. Conservative coalescing should not change the 1099 // colorability of the graph. If any live range was of low-degree before 1100 // coalescing, it should Simplify. This call sets the was-lo-degree bit. 1101 // The bit is checked in Simplify. 1102 void PhaseChaitin::set_was_low() { 1103 #ifdef ASSERT 1104 for (uint i = 1; i < _lrg_map.max_lrg_id(); i++) { 1105 int size = lrgs(i).num_regs(); 1106 uint old_was_lo = lrgs(i)._was_lo; 1107 lrgs(i)._was_lo = 0; 1108 if( lrgs(i).lo_degree() ) { 1109 lrgs(i)._was_lo = 1; // Trivially of low degree 1110 } else { // Else check the Brigg's assertion 1111 // Brigg's observation is that the lo-degree neighbors of a 1112 // hi-degree live range will not interfere with the color choices 1113 // of said hi-degree live range. The Simplify reverse-stack-coloring 1114 // order takes care of the details. Hence you do not have to count 1115 // low-degree neighbors when determining if this guy colors. 1116 int briggs_degree = 0; 1117 IndexSet *s = _ifg->neighbors(i); 1118 IndexSetIterator elements(s); 1119 uint lidx; 1120 while((lidx = elements.next()) != 0) { 1121 if( !lrgs(lidx).lo_degree() ) 1122 briggs_degree += MAX2(size,lrgs(lidx).num_regs()); 1123 } 1124 if( briggs_degree < lrgs(i).degrees_of_freedom() ) 1125 lrgs(i)._was_lo = 1; // Low degree via the briggs assertion 1126 } 1127 assert(old_was_lo <= lrgs(i)._was_lo, "_was_lo may not decrease"); 1128 } 1129 #endif 1130 } 1131 1132 // Compute cost/area ratio, in case we spill. Build the lo-degree list. 1133 void PhaseChaitin::cache_lrg_info( ) { 1134 Compile::TracePhase tp("chaitinCacheLRG", &timers[_t_chaitinCacheLRG]); 1135 1136 for (uint i = 1; i < _lrg_map.max_lrg_id(); i++) { 1137 LRG &lrg = lrgs(i); 1138 1139 // Check for being of low degree: means we can be trivially colored. 1140 // Low degree, dead or must-spill guys just get to simplify right away 1141 if( lrg.lo_degree() || 1142 !lrg.alive() || 1143 lrg._must_spill ) { 1144 // Split low degree list into those guys that must get a 1145 // register and those that can go to register or stack. 1146 // The idea is LRGs that can go register or stack color first when 1147 // they have a good chance of getting a register. The register-only 1148 // lo-degree live ranges always get a register. 1149 OptoReg::Name hi_reg = lrg.mask().find_last_elem(); 1150 if( OptoReg::is_stack(hi_reg)) { // Can go to stack? 1151 lrg._next = _lo_stk_degree; 1152 _lo_stk_degree = i; 1153 } else { 1154 lrg._next = _lo_degree; 1155 _lo_degree = i; 1156 } 1157 } else { // Else high degree 1158 lrgs(_hi_degree)._prev = i; 1159 lrg._next = _hi_degree; 1160 lrg._prev = 0; 1161 _hi_degree = i; 1162 } 1163 } 1164 } 1165 1166 // Simplify the IFG by removing LRGs of low degree. 1167 void PhaseChaitin::Simplify( ) { 1168 Compile::TracePhase tp("chaitinSimplify", &timers[_t_chaitinSimplify]); 1169 1170 while( 1 ) { // Repeat till simplified it all 1171 // May want to explore simplifying lo_degree before _lo_stk_degree. 1172 // This might result in more spills coloring into registers during 1173 // Select(). 1174 while( _lo_degree || _lo_stk_degree ) { 1175 // If possible, pull from lo_stk first 1176 uint lo; 1177 if( _lo_degree ) { 1178 lo = _lo_degree; 1179 _lo_degree = lrgs(lo)._next; 1180 } else { 1181 lo = _lo_stk_degree; 1182 _lo_stk_degree = lrgs(lo)._next; 1183 } 1184 1185 // Put the simplified guy on the simplified list. 1186 lrgs(lo)._next = _simplified; 1187 _simplified = lo; 1188 // If this guy is "at risk" then mark his current neighbors 1189 if (lrgs(lo)._at_risk && !_ifg->neighbors(lo)->is_empty()) { 1190 IndexSetIterator elements(_ifg->neighbors(lo)); 1191 uint datum; 1192 while ((datum = elements.next()) != 0) { 1193 lrgs(datum)._risk_bias = lo; 1194 } 1195 } 1196 1197 // Yank this guy from the IFG. 1198 IndexSet *adj = _ifg->remove_node(lo); 1199 if (adj->is_empty()) { 1200 continue; 1201 } 1202 1203 // If any neighbors' degrees fall below their number of 1204 // allowed registers, then put that neighbor on the low degree 1205 // list. Note that 'degree' can only fall and 'numregs' is 1206 // unchanged by this action. Thus the two are equal at most once, 1207 // so LRGs hit the lo-degree worklist at most once. 1208 IndexSetIterator elements(adj); 1209 uint neighbor; 1210 while ((neighbor = elements.next()) != 0) { 1211 LRG *n = &lrgs(neighbor); 1212 #ifdef ASSERT 1213 if (VerifyRegisterAllocator) { 1214 assert( _ifg->effective_degree(neighbor) == n->degree(), "" ); 1215 } 1216 #endif 1217 1218 // Check for just becoming of-low-degree just counting registers. 1219 // _must_spill live ranges are already on the low degree list. 1220 if (n->just_lo_degree() && !n->_must_spill) { 1221 assert(!_ifg->_yanked->test(neighbor), "Cannot move to lo degree twice"); 1222 // Pull from hi-degree list 1223 uint prev = n->_prev; 1224 uint next = n->_next; 1225 if (prev) { 1226 lrgs(prev)._next = next; 1227 } else { 1228 _hi_degree = next; 1229 } 1230 lrgs(next)._prev = prev; 1231 n->_next = _lo_degree; 1232 _lo_degree = neighbor; 1233 } 1234 } 1235 } // End of while lo-degree/lo_stk_degree worklist not empty 1236 1237 // Check for got everything: is hi-degree list empty? 1238 if (!_hi_degree) break; 1239 1240 // Time to pick a potential spill guy 1241 uint lo_score = _hi_degree; 1242 double score = lrgs(lo_score).score(); 1243 double area = lrgs(lo_score)._area; 1244 double cost = lrgs(lo_score)._cost; 1245 bool bound = lrgs(lo_score)._is_bound; 1246 1247 // Find cheapest guy 1248 debug_only( int lo_no_simplify=0; ); 1249 for (uint i = _hi_degree; i; i = lrgs(i)._next) { 1250 assert(!_ifg->_yanked->test(i), ""); 1251 // It's just vaguely possible to move hi-degree to lo-degree without 1252 // going through a just-lo-degree stage: If you remove a double from 1253 // a float live range it's degree will drop by 2 and you can skip the 1254 // just-lo-degree stage. It's very rare (shows up after 5000+ methods 1255 // in -Xcomp of Java2Demo). So just choose this guy to simplify next. 1256 if( lrgs(i).lo_degree() ) { 1257 lo_score = i; 1258 break; 1259 } 1260 debug_only( if( lrgs(i)._was_lo ) lo_no_simplify=i; ); 1261 double iscore = lrgs(i).score(); 1262 double iarea = lrgs(i)._area; 1263 double icost = lrgs(i)._cost; 1264 bool ibound = lrgs(i)._is_bound; 1265 1266 // Compare cost/area of i vs cost/area of lo_score. Smaller cost/area 1267 // wins. Ties happen because all live ranges in question have spilled 1268 // a few times before and the spill-score adds a huge number which 1269 // washes out the low order bits. We are choosing the lesser of 2 1270 // evils; in this case pick largest area to spill. 1271 // Ties also happen when live ranges are defined and used only inside 1272 // one block. In which case their area is 0 and score set to max. 1273 // In such case choose bound live range over unbound to free registers 1274 // or with smaller cost to spill. 1275 if ( iscore < score || 1276 (iscore == score && iarea > area && lrgs(lo_score)._was_spilled2) || 1277 (iscore == score && iarea == area && 1278 ( (ibound && !bound) || (ibound == bound && (icost < cost)) )) ) { 1279 lo_score = i; 1280 score = iscore; 1281 area = iarea; 1282 cost = icost; 1283 bound = ibound; 1284 } 1285 } 1286 LRG *lo_lrg = &lrgs(lo_score); 1287 // The live range we choose for spilling is either hi-degree, or very 1288 // rarely it can be low-degree. If we choose a hi-degree live range 1289 // there better not be any lo-degree choices. 1290 assert( lo_lrg->lo_degree() || !lo_no_simplify, "Live range was lo-degree before coalesce; should simplify" ); 1291 1292 // Pull from hi-degree list 1293 uint prev = lo_lrg->_prev; 1294 uint next = lo_lrg->_next; 1295 if( prev ) lrgs(prev)._next = next; 1296 else _hi_degree = next; 1297 lrgs(next)._prev = prev; 1298 // Jam him on the lo-degree list, despite his high degree. 1299 // Maybe he'll get a color, and maybe he'll spill. 1300 // Only Select() will know. 1301 lrgs(lo_score)._at_risk = true; 1302 _lo_degree = lo_score; 1303 lo_lrg->_next = 0; 1304 1305 } // End of while not simplified everything 1306 1307 } 1308 1309 // Is 'reg' register legal for 'lrg'? 1310 static bool is_legal_reg(LRG &lrg, OptoReg::Name reg, int chunk) { 1311 if (reg >= chunk && reg < (chunk + RegMask::CHUNK_SIZE) && 1312 lrg.mask().Member(OptoReg::add(reg,-chunk))) { 1313 // RA uses OptoReg which represent the highest element of a registers set. 1314 // For example, vectorX (128bit) on x86 uses [XMM,XMMb,XMMc,XMMd] set 1315 // in which XMMd is used by RA to represent such vectors. A double value 1316 // uses [XMM,XMMb] pairs and XMMb is used by RA for it. 1317 // The register mask uses largest bits set of overlapping register sets. 1318 // On x86 with AVX it uses 8 bits for each XMM registers set. 1319 // 1320 // The 'lrg' already has cleared-to-set register mask (done in Select() 1321 // before calling choose_color()). Passing mask.Member(reg) check above 1322 // indicates that the size (num_regs) of 'reg' set is less or equal to 1323 // 'lrg' set size. 1324 // For set size 1 any register which is member of 'lrg' mask is legal. 1325 if (lrg.num_regs()==1) 1326 return true; 1327 // For larger sets only an aligned register with the same set size is legal. 1328 int mask = lrg.num_regs()-1; 1329 if ((reg&mask) == mask) 1330 return true; 1331 } 1332 return false; 1333 } 1334 1335 static OptoReg::Name find_first_set(LRG &lrg, RegMask mask, int chunk) { 1336 int num_regs = lrg.num_regs(); 1337 OptoReg::Name assigned = mask.find_first_set(lrg, num_regs); 1338 1339 if (lrg.is_scalable()) { 1340 // a physical register is found 1341 if (chunk == 0 && OptoReg::is_reg(assigned)) { 1342 return assigned; 1343 } 1344 1345 // find available stack slots for scalable register 1346 if (lrg._is_vector) { 1347 num_regs = lrg.scalable_reg_slots(); 1348 // if actual scalable vector register is exactly SlotsPerVecA * 32 bits 1349 if (num_regs == RegMask::SlotsPerVecA) { 1350 return assigned; 1351 } 1352 1353 // mask has been cleared out by clear_to_sets(SlotsPerVecA) before choose_color, but it 1354 // does not work for scalable size. We have to find adjacent scalable_reg_slots() bits 1355 // instead of SlotsPerVecA bits. 1356 assigned = mask.find_first_set(lrg, num_regs); // find highest valid reg 1357 while (OptoReg::is_valid(assigned) && RegMask::can_represent(assigned)) { 1358 // Verify the found reg has scalable_reg_slots() bits set. 1359 if (mask.is_valid_reg(assigned, num_regs)) { 1360 return assigned; 1361 } else { 1362 // Remove more for each iteration 1363 mask.Remove(assigned - num_regs + 1); // Unmask the lowest reg 1364 mask.clear_to_sets(RegMask::SlotsPerVecA); // Align by SlotsPerVecA bits 1365 assigned = mask.find_first_set(lrg, num_regs); 1366 } 1367 } 1368 return OptoReg::Bad; // will cause chunk change, and retry next chunk 1369 } 1370 } 1371 1372 return assigned; 1373 } 1374 1375 // Choose a color using the biasing heuristic 1376 OptoReg::Name PhaseChaitin::bias_color( LRG &lrg, int chunk ) { 1377 1378 // Check for "at_risk" LRG's 1379 uint risk_lrg = _lrg_map.find(lrg._risk_bias); 1380 if (risk_lrg != 0 && !_ifg->neighbors(risk_lrg)->is_empty()) { 1381 // Walk the colored neighbors of the "at_risk" candidate 1382 // Choose a color which is both legal and already taken by a neighbor 1383 // of the "at_risk" candidate in order to improve the chances of the 1384 // "at_risk" candidate of coloring 1385 IndexSetIterator elements(_ifg->neighbors(risk_lrg)); 1386 uint datum; 1387 while ((datum = elements.next()) != 0) { 1388 OptoReg::Name reg = lrgs(datum).reg(); 1389 // If this LRG's register is legal for us, choose it 1390 if (is_legal_reg(lrg, reg, chunk)) 1391 return reg; 1392 } 1393 } 1394 1395 uint copy_lrg = _lrg_map.find(lrg._copy_bias); 1396 if (copy_lrg != 0) { 1397 // If he has a color, 1398 if(!_ifg->_yanked->test(copy_lrg)) { 1399 OptoReg::Name reg = lrgs(copy_lrg).reg(); 1400 // And it is legal for you, 1401 if (is_legal_reg(lrg, reg, chunk)) 1402 return reg; 1403 } else if( chunk == 0 ) { 1404 // Choose a color which is legal for him 1405 RegMask tempmask = lrg.mask(); 1406 tempmask.AND(lrgs(copy_lrg).mask()); 1407 tempmask.clear_to_sets(lrg.num_regs()); 1408 OptoReg::Name reg = find_first_set(lrg, tempmask, chunk); 1409 if (OptoReg::is_valid(reg)) 1410 return reg; 1411 } 1412 } 1413 1414 // If no bias info exists, just go with the register selection ordering 1415 if (lrg._is_vector || lrg.num_regs() == 2) { 1416 // Find an aligned set 1417 return OptoReg::add(find_first_set(lrg, lrg.mask(), chunk), chunk); 1418 } 1419 1420 // CNC - Fun hack. Alternate 1st and 2nd selection. Enables post-allocate 1421 // copy removal to remove many more copies, by preventing a just-assigned 1422 // register from being repeatedly assigned. 1423 OptoReg::Name reg = lrg.mask().find_first_elem(); 1424 if( (++_alternate & 1) && OptoReg::is_valid(reg) ) { 1425 // This 'Remove; find; Insert' idiom is an expensive way to find the 1426 // SECOND element in the mask. 1427 lrg.Remove(reg); 1428 OptoReg::Name reg2 = lrg.mask().find_first_elem(); 1429 lrg.Insert(reg); 1430 if( OptoReg::is_reg(reg2)) 1431 reg = reg2; 1432 } 1433 return OptoReg::add( reg, chunk ); 1434 } 1435 1436 // Choose a color in the current chunk 1437 OptoReg::Name PhaseChaitin::choose_color( LRG &lrg, int chunk ) { 1438 assert( C->in_preserve_stack_slots() == 0 || chunk != 0 || lrg._is_bound || lrg.mask().is_bound1() || !lrg.mask().Member(OptoReg::Name(_matcher._old_SP-1)), "must not allocate stack0 (inside preserve area)"); 1439 assert(C->out_preserve_stack_slots() == 0 || chunk != 0 || lrg._is_bound || lrg.mask().is_bound1() || !lrg.mask().Member(OptoReg::Name(_matcher._old_SP+0)), "must not allocate stack0 (inside preserve area)"); 1440 1441 if( lrg.num_regs() == 1 || // Common Case 1442 !lrg._fat_proj ) // Aligned+adjacent pairs ok 1443 // Use a heuristic to "bias" the color choice 1444 return bias_color(lrg, chunk); 1445 1446 assert(!lrg._is_vector, "should be not vector here" ); 1447 assert( lrg.num_regs() >= 2, "dead live ranges do not color" ); 1448 1449 // Fat-proj case or misaligned double argument. 1450 assert(lrg.compute_mask_size() == lrg.num_regs() || 1451 lrg.num_regs() == 2,"fat projs exactly color" ); 1452 assert( !chunk, "always color in 1st chunk" ); 1453 // Return the highest element in the set. 1454 return lrg.mask().find_last_elem(); 1455 } 1456 1457 // Select colors by re-inserting LRGs back into the IFG. LRGs are re-inserted 1458 // in reverse order of removal. As long as nothing of hi-degree was yanked, 1459 // everything going back is guaranteed a color. Select that color. If some 1460 // hi-degree LRG cannot get a color then we record that we must spill. 1461 uint PhaseChaitin::Select( ) { 1462 Compile::TracePhase tp("chaitinSelect", &timers[_t_chaitinSelect]); 1463 1464 uint spill_reg = LRG::SPILL_REG; 1465 _max_reg = OptoReg::Name(0); // Past max register used 1466 while( _simplified ) { 1467 // Pull next LRG from the simplified list - in reverse order of removal 1468 uint lidx = _simplified; 1469 LRG *lrg = &lrgs(lidx); 1470 _simplified = lrg->_next; 1471 1472 #ifndef PRODUCT 1473 if (trace_spilling()) { 1474 ttyLocker ttyl; 1475 tty->print_cr("L%d selecting degree %d degrees_of_freedom %d", lidx, lrg->degree(), 1476 lrg->degrees_of_freedom()); 1477 lrg->dump(); 1478 } 1479 #endif 1480 1481 // Re-insert into the IFG 1482 _ifg->re_insert(lidx); 1483 if( !lrg->alive() ) continue; 1484 // capture allstackedness flag before mask is hacked 1485 const int is_allstack = lrg->mask().is_AllStack(); 1486 1487 // Yeah, yeah, yeah, I know, I know. I can refactor this 1488 // to avoid the GOTO, although the refactored code will not 1489 // be much clearer. We arrive here IFF we have a stack-based 1490 // live range that cannot color in the current chunk, and it 1491 // has to move into the next free stack chunk. 1492 int chunk = 0; // Current chunk is first chunk 1493 retry_next_chunk: 1494 1495 // Remove neighbor colors 1496 IndexSet *s = _ifg->neighbors(lidx); 1497 debug_only(RegMask orig_mask = lrg->mask();) 1498 1499 if (!s->is_empty()) { 1500 IndexSetIterator elements(s); 1501 uint neighbor; 1502 while ((neighbor = elements.next()) != 0) { 1503 // Note that neighbor might be a spill_reg. In this case, exclusion 1504 // of its color will be a no-op, since the spill_reg chunk is in outer 1505 // space. Also, if neighbor is in a different chunk, this exclusion 1506 // will be a no-op. (Later on, if lrg runs out of possible colors in 1507 // its chunk, a new chunk of color may be tried, in which case 1508 // examination of neighbors is started again, at retry_next_chunk.) 1509 LRG &nlrg = lrgs(neighbor); 1510 OptoReg::Name nreg = nlrg.reg(); 1511 // Only subtract masks in the same chunk 1512 if (nreg >= chunk && nreg < chunk + RegMask::CHUNK_SIZE) { 1513 #ifndef PRODUCT 1514 uint size = lrg->mask().Size(); 1515 RegMask rm = lrg->mask(); 1516 #endif 1517 lrg->SUBTRACT(nlrg.mask()); 1518 #ifndef PRODUCT 1519 if (trace_spilling() && lrg->mask().Size() != size) { 1520 ttyLocker ttyl; 1521 tty->print("L%d ", lidx); 1522 rm.dump(); 1523 tty->print(" intersected L%d ", neighbor); 1524 nlrg.mask().dump(); 1525 tty->print(" removed "); 1526 rm.SUBTRACT(lrg->mask()); 1527 rm.dump(); 1528 tty->print(" leaving "); 1529 lrg->mask().dump(); 1530 tty->cr(); 1531 } 1532 #endif 1533 } 1534 } 1535 } 1536 //assert(is_allstack == lrg->mask().is_AllStack(), "nbrs must not change AllStackedness"); 1537 // Aligned pairs need aligned masks 1538 assert(!lrg->_is_vector || !lrg->_fat_proj, "sanity"); 1539 if (lrg->num_regs() > 1 && !lrg->_fat_proj) { 1540 lrg->clear_to_sets(); 1541 } 1542 1543 // Check if a color is available and if so pick the color 1544 OptoReg::Name reg = choose_color( *lrg, chunk ); 1545 1546 //--------------- 1547 // If we fail to color and the AllStack flag is set, trigger 1548 // a chunk-rollover event 1549 if(!OptoReg::is_valid(OptoReg::add(reg,-chunk)) && is_allstack) { 1550 // Bump register mask up to next stack chunk 1551 chunk += RegMask::CHUNK_SIZE; 1552 lrg->Set_All(); 1553 goto retry_next_chunk; 1554 } 1555 1556 //--------------- 1557 // Did we get a color? 1558 else if( OptoReg::is_valid(reg)) { 1559 #ifndef PRODUCT 1560 RegMask avail_rm = lrg->mask(); 1561 #endif 1562 1563 // Record selected register 1564 lrg->set_reg(reg); 1565 1566 if( reg >= _max_reg ) // Compute max register limit 1567 _max_reg = OptoReg::add(reg,1); 1568 // Fold reg back into normal space 1569 reg = OptoReg::add(reg,-chunk); 1570 1571 // If the live range is not bound, then we actually had some choices 1572 // to make. In this case, the mask has more bits in it than the colors 1573 // chosen. Restrict the mask to just what was picked. 1574 int n_regs = lrg->num_regs(); 1575 assert(!lrg->_is_vector || !lrg->_fat_proj, "sanity"); 1576 if (n_regs == 1 || !lrg->_fat_proj) { 1577 if (Matcher::supports_scalable_vector()) { 1578 assert(!lrg->_is_vector || n_regs <= RegMask::SlotsPerVecA, "sanity"); 1579 } else { 1580 assert(!lrg->_is_vector || n_regs <= RegMask::SlotsPerVecZ, "sanity"); 1581 } 1582 lrg->Clear(); // Clear the mask 1583 lrg->Insert(reg); // Set regmask to match selected reg 1584 // For vectors and pairs, also insert the low bit of the pair 1585 // We always choose the high bit, then mask the low bits by register size 1586 if (lrg->is_scalable() && OptoReg::is_stack(lrg->reg())) { // stack 1587 n_regs = lrg->scalable_reg_slots(); 1588 } 1589 for (int i = 1; i < n_regs; i++) { 1590 lrg->Insert(OptoReg::add(reg,-i)); 1591 } 1592 lrg->set_mask_size(n_regs); 1593 } else { // Else fatproj 1594 // mask must be equal to fatproj bits, by definition 1595 } 1596 #ifndef PRODUCT 1597 if (trace_spilling()) { 1598 ttyLocker ttyl; 1599 tty->print("L%d selected ", lidx); 1600 lrg->mask().dump(); 1601 tty->print(" from "); 1602 avail_rm.dump(); 1603 tty->cr(); 1604 } 1605 #endif 1606 // Note that reg is the highest-numbered register in the newly-bound mask. 1607 } // end color available case 1608 1609 //--------------- 1610 // Live range is live and no colors available 1611 else { 1612 assert( lrg->alive(), "" ); 1613 assert( !lrg->_fat_proj || lrg->is_multidef() || 1614 lrg->_def->outcnt() > 0, "fat_proj cannot spill"); 1615 assert( !orig_mask.is_AllStack(), "All Stack does not spill" ); 1616 1617 // Assign the special spillreg register 1618 lrg->set_reg(OptoReg::Name(spill_reg++)); 1619 // Do not empty the regmask; leave mask_size lying around 1620 // for use during Spilling 1621 #ifndef PRODUCT 1622 if( trace_spilling() ) { 1623 ttyLocker ttyl; 1624 tty->print("L%d spilling with neighbors: ", lidx); 1625 s->dump(); 1626 debug_only(tty->print(" original mask: ")); 1627 debug_only(orig_mask.dump()); 1628 dump_lrg(lidx); 1629 } 1630 #endif 1631 } // end spill case 1632 1633 } 1634 1635 return spill_reg-LRG::SPILL_REG; // Return number of spills 1636 } 1637 1638 // Set the 'spilled_once' or 'spilled_twice' flag on a node. 1639 void PhaseChaitin::set_was_spilled( Node *n ) { 1640 if( _spilled_once.test_set(n->_idx) ) 1641 _spilled_twice.set(n->_idx); 1642 } 1643 1644 // Convert Ideal spill instructions into proper FramePtr + offset Loads and 1645 // Stores. Use-def chains are NOT preserved, but Node->LRG->reg maps are. 1646 void PhaseChaitin::fixup_spills() { 1647 // This function does only cisc spill work. 1648 if( !UseCISCSpill ) return; 1649 1650 Compile::TracePhase tp("fixupSpills", &timers[_t_fixupSpills]); 1651 1652 // Grab the Frame Pointer 1653 Node *fp = _cfg.get_root_block()->head()->in(1)->in(TypeFunc::FramePtr); 1654 1655 // For all blocks 1656 for (uint i = 0; i < _cfg.number_of_blocks(); i++) { 1657 Block* block = _cfg.get_block(i); 1658 1659 // For all instructions in block 1660 uint last_inst = block->end_idx(); 1661 for (uint j = 1; j <= last_inst; j++) { 1662 Node* n = block->get_node(j); 1663 1664 // Dead instruction??? 1665 assert( n->outcnt() != 0 ||// Nothing dead after post alloc 1666 C->top() == n || // Or the random TOP node 1667 n->is_Proj(), // Or a fat-proj kill node 1668 "No dead instructions after post-alloc" ); 1669 1670 int inp = n->cisc_operand(); 1671 if( inp != AdlcVMDeps::Not_cisc_spillable ) { 1672 // Convert operand number to edge index number 1673 MachNode *mach = n->as_Mach(); 1674 inp = mach->operand_index(inp); 1675 Node *src = n->in(inp); // Value to load or store 1676 LRG &lrg_cisc = lrgs(_lrg_map.find_const(src)); 1677 OptoReg::Name src_reg = lrg_cisc.reg(); 1678 // Doubles record the HIGH register of an adjacent pair. 1679 src_reg = OptoReg::add(src_reg,1-lrg_cisc.num_regs()); 1680 if( OptoReg::is_stack(src_reg) ) { // If input is on stack 1681 // This is a CISC Spill, get stack offset and construct new node 1682 #ifndef PRODUCT 1683 if( TraceCISCSpill ) { 1684 tty->print(" reg-instr: "); 1685 n->dump(); 1686 } 1687 #endif 1688 int stk_offset = reg2offset(src_reg); 1689 // Bailout if we might exceed node limit when spilling this instruction 1690 C->check_node_count(0, "out of nodes fixing spills"); 1691 if (C->failing()) return; 1692 // Transform node 1693 MachNode *cisc = mach->cisc_version(stk_offset)->as_Mach(); 1694 cisc->set_req(inp,fp); // Base register is frame pointer 1695 if( cisc->oper_input_base() > 1 && mach->oper_input_base() <= 1 ) { 1696 assert( cisc->oper_input_base() == 2, "Only adding one edge"); 1697 cisc->ins_req(1,src); // Requires a memory edge 1698 } 1699 block->map_node(cisc, j); // Insert into basic block 1700 n->subsume_by(cisc, C); // Correct graph 1701 // 1702 ++_used_cisc_instructions; 1703 #ifndef PRODUCT 1704 if( TraceCISCSpill ) { 1705 tty->print(" cisc-instr: "); 1706 cisc->dump(); 1707 } 1708 #endif 1709 } else { 1710 #ifndef PRODUCT 1711 if( TraceCISCSpill ) { 1712 tty->print(" using reg-instr: "); 1713 n->dump(); 1714 } 1715 #endif 1716 ++_unused_cisc_instructions; // input can be on stack 1717 } 1718 } 1719 1720 } // End of for all instructions 1721 1722 } // End of for all blocks 1723 } 1724 1725 // Helper to stretch above; recursively discover the base Node for a 1726 // given derived Node. Easy for AddP-related machine nodes, but needs 1727 // to be recursive for derived Phis. 1728 Node *PhaseChaitin::find_base_for_derived( Node **derived_base_map, Node *derived, uint &maxlrg ) { 1729 // See if already computed; if so return it 1730 if( derived_base_map[derived->_idx] ) 1731 return derived_base_map[derived->_idx]; 1732 1733 // See if this happens to be a base. 1734 // NOTE: we use TypePtr instead of TypeOopPtr because we can have 1735 // pointers derived from NULL! These are always along paths that 1736 // can't happen at run-time but the optimizer cannot deduce it so 1737 // we have to handle it gracefully. 1738 assert(!derived->bottom_type()->isa_narrowoop() || 1739 derived->bottom_type()->make_ptr()->is_ptr()->_offset == 0, "sanity"); 1740 const TypePtr *tj = derived->bottom_type()->isa_ptr(); 1741 // If its an OOP with a non-zero offset, then it is derived. 1742 if( tj == NULL || tj->_offset == 0 ) { 1743 derived_base_map[derived->_idx] = derived; 1744 return derived; 1745 } 1746 // Derived is NULL+offset? Base is NULL! 1747 if( derived->is_Con() ) { 1748 Node *base = _matcher.mach_null(); 1749 assert(base != NULL, "sanity"); 1750 if (base->in(0) == NULL) { 1751 // Initialize it once and make it shared: 1752 // set control to _root and place it into Start block 1753 // (where top() node is placed). 1754 base->init_req(0, _cfg.get_root_node()); 1755 Block *startb = _cfg.get_block_for_node(C->top()); 1756 uint node_pos = startb->find_node(C->top()); 1757 startb->insert_node(base, node_pos); 1758 _cfg.map_node_to_block(base, startb); 1759 assert(_lrg_map.live_range_id(base) == 0, "should not have LRG yet"); 1760 1761 // The loadConP0 might have projection nodes depending on architecture 1762 // Add the projection nodes to the CFG 1763 for (DUIterator_Fast imax, i = base->fast_outs(imax); i < imax; i++) { 1764 Node* use = base->fast_out(i); 1765 if (use->is_MachProj()) { 1766 startb->insert_node(use, ++node_pos); 1767 _cfg.map_node_to_block(use, startb); 1768 new_lrg(use, maxlrg++); 1769 } 1770 } 1771 } 1772 if (_lrg_map.live_range_id(base) == 0) { 1773 new_lrg(base, maxlrg++); 1774 } 1775 assert(base->in(0) == _cfg.get_root_node() && _cfg.get_block_for_node(base) == _cfg.get_block_for_node(C->top()), "base NULL should be shared"); 1776 derived_base_map[derived->_idx] = base; 1777 return base; 1778 } 1779 1780 // Check for AddP-related opcodes 1781 if (!derived->is_Phi()) { 1782 assert(derived->as_Mach()->ideal_Opcode() == Op_AddP, "but is: %s", derived->Name()); 1783 Node *base = derived->in(AddPNode::Base); 1784 derived_base_map[derived->_idx] = base; 1785 return base; 1786 } 1787 1788 // Recursively find bases for Phis. 1789 // First check to see if we can avoid a base Phi here. 1790 Node *base = find_base_for_derived( derived_base_map, derived->in(1),maxlrg); 1791 uint i; 1792 for( i = 2; i < derived->req(); i++ ) 1793 if( base != find_base_for_derived( derived_base_map,derived->in(i),maxlrg)) 1794 break; 1795 // Went to the end without finding any different bases? 1796 if( i == derived->req() ) { // No need for a base Phi here 1797 derived_base_map[derived->_idx] = base; 1798 return base; 1799 } 1800 1801 // Now we see we need a base-Phi here to merge the bases 1802 const Type *t = base->bottom_type(); 1803 base = new PhiNode( derived->in(0), t ); 1804 for( i = 1; i < derived->req(); i++ ) { 1805 base->init_req(i, find_base_for_derived(derived_base_map, derived->in(i), maxlrg)); 1806 t = t->meet(base->in(i)->bottom_type()); 1807 } 1808 base->as_Phi()->set_type(t); 1809 1810 // Search the current block for an existing base-Phi 1811 Block *b = _cfg.get_block_for_node(derived); 1812 for( i = 1; i <= b->end_idx(); i++ ) {// Search for matching Phi 1813 Node *phi = b->get_node(i); 1814 if( !phi->is_Phi() ) { // Found end of Phis with no match? 1815 b->insert_node(base, i); // Must insert created Phi here as base 1816 _cfg.map_node_to_block(base, b); 1817 new_lrg(base,maxlrg++); 1818 break; 1819 } 1820 // See if Phi matches. 1821 uint j; 1822 for( j = 1; j < base->req(); j++ ) 1823 if( phi->in(j) != base->in(j) && 1824 !(phi->in(j)->is_Con() && base->in(j)->is_Con()) ) // allow different NULLs 1825 break; 1826 if( j == base->req() ) { // All inputs match? 1827 base = phi; // Then use existing 'phi' and drop 'base' 1828 break; 1829 } 1830 } 1831 1832 1833 // Cache info for later passes 1834 derived_base_map[derived->_idx] = base; 1835 return base; 1836 } 1837 1838 // At each Safepoint, insert extra debug edges for each pair of derived value/ 1839 // base pointer that is live across the Safepoint for oopmap building. The 1840 // edge pairs get added in after sfpt->jvmtail()->oopoff(), but are in the 1841 // required edge set. 1842 bool PhaseChaitin::stretch_base_pointer_live_ranges(ResourceArea *a) { 1843 int must_recompute_live = false; 1844 uint maxlrg = _lrg_map.max_lrg_id(); 1845 Node **derived_base_map = (Node**)a->Amalloc(sizeof(Node*)*C->unique()); 1846 memset( derived_base_map, 0, sizeof(Node*)*C->unique() ); 1847 1848 // For all blocks in RPO do... 1849 for (uint i = 0; i < _cfg.number_of_blocks(); i++) { 1850 Block* block = _cfg.get_block(i); 1851 // Note use of deep-copy constructor. I cannot hammer the original 1852 // liveout bits, because they are needed by the following coalesce pass. 1853 IndexSet liveout(_live->live(block)); 1854 1855 for (uint j = block->end_idx() + 1; j > 1; j--) { 1856 Node* n = block->get_node(j - 1); 1857 1858 // Pre-split compares of loop-phis. Loop-phis form a cycle we would 1859 // like to see in the same register. Compare uses the loop-phi and so 1860 // extends its live range BUT cannot be part of the cycle. If this 1861 // extended live range overlaps with the update of the loop-phi value 1862 // we need both alive at the same time -- which requires at least 1 1863 // copy. But because Intel has only 2-address registers we end up with 1864 // at least 2 copies, one before the loop-phi update instruction and 1865 // one after. Instead we split the input to the compare just after the 1866 // phi. 1867 if( n->is_Mach() && n->as_Mach()->ideal_Opcode() == Op_CmpI ) { 1868 Node *phi = n->in(1); 1869 if( phi->is_Phi() && phi->as_Phi()->region()->is_Loop() ) { 1870 Block *phi_block = _cfg.get_block_for_node(phi); 1871 if (_cfg.get_block_for_node(phi_block->pred(2)) == block) { 1872 const RegMask *mask = C->matcher()->idealreg2spillmask[Op_RegI]; 1873 Node *spill = new MachSpillCopyNode(MachSpillCopyNode::LoopPhiInput, phi, *mask, *mask); 1874 insert_proj( phi_block, 1, spill, maxlrg++ ); 1875 n->set_req(1,spill); 1876 must_recompute_live = true; 1877 } 1878 } 1879 } 1880 1881 // Get value being defined 1882 uint lidx = _lrg_map.live_range_id(n); 1883 // Ignore the occasional brand-new live range 1884 if (lidx && lidx < _lrg_map.max_lrg_id()) { 1885 // Remove from live-out set 1886 liveout.remove(lidx); 1887 1888 // Copies do not define a new value and so do not interfere. 1889 // Remove the copies source from the liveout set before interfering. 1890 uint idx = n->is_Copy(); 1891 if (idx) { 1892 liveout.remove(_lrg_map.live_range_id(n->in(idx))); 1893 } 1894 } 1895 1896 // Found a safepoint? 1897 JVMState *jvms = n->jvms(); 1898 if (jvms && !liveout.is_empty()) { 1899 // Now scan for a live derived pointer 1900 IndexSetIterator elements(&liveout); 1901 uint neighbor; 1902 while ((neighbor = elements.next()) != 0) { 1903 // Find reaching DEF for base and derived values 1904 // This works because we are still in SSA during this call. 1905 Node *derived = lrgs(neighbor)._def; 1906 const TypePtr *tj = derived->bottom_type()->isa_ptr(); 1907 assert(!derived->bottom_type()->isa_narrowoop() || 1908 derived->bottom_type()->make_ptr()->is_ptr()->_offset == 0, "sanity"); 1909 // If its an OOP with a non-zero offset, then it is derived. 1910 if( tj && tj->_offset != 0 && tj->isa_oop_ptr() ) { 1911 Node *base = find_base_for_derived(derived_base_map, derived, maxlrg); 1912 assert(base->_idx < _lrg_map.size(), ""); 1913 // Add reaching DEFs of derived pointer and base pointer as a 1914 // pair of inputs 1915 n->add_req(derived); 1916 n->add_req(base); 1917 1918 // See if the base pointer is already live to this point. 1919 // Since I'm working on the SSA form, live-ness amounts to 1920 // reaching def's. So if I find the base's live range then 1921 // I know the base's def reaches here. 1922 if ((_lrg_map.live_range_id(base) >= _lrg_map.max_lrg_id() || // (Brand new base (hence not live) or 1923 !liveout.member(_lrg_map.live_range_id(base))) && // not live) AND 1924 (_lrg_map.live_range_id(base) > 0) && // not a constant 1925 _cfg.get_block_for_node(base) != block) { // base not def'd in blk) 1926 // Base pointer is not currently live. Since I stretched 1927 // the base pointer to here and it crosses basic-block 1928 // boundaries, the global live info is now incorrect. 1929 // Recompute live. 1930 must_recompute_live = true; 1931 } // End of if base pointer is not live to debug info 1932 } 1933 } // End of scan all live data for derived ptrs crossing GC point 1934 } // End of if found a GC point 1935 1936 // Make all inputs live 1937 if (!n->is_Phi()) { // Phi function uses come from prior block 1938 for (uint k = 1; k < n->req(); k++) { 1939 uint lidx = _lrg_map.live_range_id(n->in(k)); 1940 if (lidx < _lrg_map.max_lrg_id()) { 1941 liveout.insert(lidx); 1942 } 1943 } 1944 } 1945 1946 } // End of forall instructions in block 1947 liveout.clear(); // Free the memory used by liveout. 1948 1949 } // End of forall blocks 1950 _lrg_map.set_max_lrg_id(maxlrg); 1951 1952 // If I created a new live range I need to recompute live 1953 if (maxlrg != _ifg->_maxlrg) { 1954 must_recompute_live = true; 1955 } 1956 1957 return must_recompute_live != 0; 1958 } 1959 1960 // Extend the node to LRG mapping 1961 1962 void PhaseChaitin::add_reference(const Node *node, const Node *old_node) { 1963 _lrg_map.extend(node->_idx, _lrg_map.live_range_id(old_node)); 1964 } 1965 1966 #ifndef PRODUCT 1967 void PhaseChaitin::dump(const Node* n) const { 1968 uint r = (n->_idx < _lrg_map.size()) ? _lrg_map.find_const(n) : 0; 1969 tty->print("L%d",r); 1970 if (r && n->Opcode() != Op_Phi) { 1971 if( _node_regs ) { // Got a post-allocation copy of allocation? 1972 tty->print("["); 1973 OptoReg::Name second = get_reg_second(n); 1974 if( OptoReg::is_valid(second) ) { 1975 if( OptoReg::is_reg(second) ) 1976 tty->print("%s:",Matcher::regName[second]); 1977 else 1978 tty->print("%s+%d:",OptoReg::regname(OptoReg::c_frame_pointer), reg2offset_unchecked(second)); 1979 } 1980 OptoReg::Name first = get_reg_first(n); 1981 if( OptoReg::is_reg(first) ) 1982 tty->print("%s]",Matcher::regName[first]); 1983 else 1984 tty->print("%s+%d]",OptoReg::regname(OptoReg::c_frame_pointer), reg2offset_unchecked(first)); 1985 } else 1986 n->out_RegMask().dump(); 1987 } 1988 tty->print("/N%d\t",n->_idx); 1989 tty->print("%s === ", n->Name()); 1990 uint k; 1991 for (k = 0; k < n->req(); k++) { 1992 Node *m = n->in(k); 1993 if (!m) { 1994 tty->print("_ "); 1995 } 1996 else { 1997 uint r = (m->_idx < _lrg_map.size()) ? _lrg_map.find_const(m) : 0; 1998 tty->print("L%d",r); 1999 // Data MultiNode's can have projections with no real registers. 2000 // Don't die while dumping them. 2001 int op = n->Opcode(); 2002 if( r && op != Op_Phi && op != Op_Proj && op != Op_SCMemProj) { 2003 if( _node_regs ) { 2004 tty->print("["); 2005 OptoReg::Name second = get_reg_second(n->in(k)); 2006 if( OptoReg::is_valid(second) ) { 2007 if( OptoReg::is_reg(second) ) 2008 tty->print("%s:",Matcher::regName[second]); 2009 else 2010 tty->print("%s+%d:",OptoReg::regname(OptoReg::c_frame_pointer), 2011 reg2offset_unchecked(second)); 2012 } 2013 OptoReg::Name first = get_reg_first(n->in(k)); 2014 if( OptoReg::is_reg(first) ) 2015 tty->print("%s]",Matcher::regName[first]); 2016 else 2017 tty->print("%s+%d]",OptoReg::regname(OptoReg::c_frame_pointer), 2018 reg2offset_unchecked(first)); 2019 } else 2020 n->in_RegMask(k).dump(); 2021 } 2022 tty->print("/N%d ",m->_idx); 2023 } 2024 } 2025 if( k < n->len() && n->in(k) ) tty->print("| "); 2026 for( ; k < n->len(); k++ ) { 2027 Node *m = n->in(k); 2028 if(!m) { 2029 break; 2030 } 2031 uint r = (m->_idx < _lrg_map.size()) ? _lrg_map.find_const(m) : 0; 2032 tty->print("L%d",r); 2033 tty->print("/N%d ",m->_idx); 2034 } 2035 if( n->is_Mach() ) n->as_Mach()->dump_spec(tty); 2036 else n->dump_spec(tty); 2037 if( _spilled_once.test(n->_idx ) ) { 2038 tty->print(" Spill_1"); 2039 if( _spilled_twice.test(n->_idx ) ) 2040 tty->print(" Spill_2"); 2041 } 2042 tty->print("\n"); 2043 } 2044 2045 void PhaseChaitin::dump(const Block* b) const { 2046 b->dump_head(&_cfg); 2047 2048 // For all instructions 2049 for( uint j = 0; j < b->number_of_nodes(); j++ ) 2050 dump(b->get_node(j)); 2051 // Print live-out info at end of block 2052 if( _live ) { 2053 tty->print("Liveout: "); 2054 IndexSet *live = _live->live(b); 2055 IndexSetIterator elements(live); 2056 tty->print("{"); 2057 uint i; 2058 while ((i = elements.next()) != 0) { 2059 tty->print("L%d ", _lrg_map.find_const(i)); 2060 } 2061 tty->print_cr("}"); 2062 } 2063 tty->print("\n"); 2064 } 2065 2066 void PhaseChaitin::dump() const { 2067 tty->print( "--- Chaitin -- argsize: %d framesize: %d ---\n", 2068 _matcher._new_SP, _framesize ); 2069 2070 // For all blocks 2071 for (uint i = 0; i < _cfg.number_of_blocks(); i++) { 2072 dump(_cfg.get_block(i)); 2073 } 2074 // End of per-block dump 2075 tty->print("\n"); 2076 2077 if (!_ifg) { 2078 tty->print("(No IFG.)\n"); 2079 return; 2080 } 2081 2082 // Dump LRG array 2083 tty->print("--- Live RanGe Array ---\n"); 2084 for (uint i2 = 1; i2 < _lrg_map.max_lrg_id(); i2++) { 2085 tty->print("L%d: ",i2); 2086 if (i2 < _ifg->_maxlrg) { 2087 lrgs(i2).dump(); 2088 } 2089 else { 2090 tty->print_cr("new LRG"); 2091 } 2092 } 2093 tty->cr(); 2094 2095 // Dump lo-degree list 2096 tty->print("Lo degree: "); 2097 for(uint i3 = _lo_degree; i3; i3 = lrgs(i3)._next ) 2098 tty->print("L%d ",i3); 2099 tty->cr(); 2100 2101 // Dump lo-stk-degree list 2102 tty->print("Lo stk degree: "); 2103 for(uint i4 = _lo_stk_degree; i4; i4 = lrgs(i4)._next ) 2104 tty->print("L%d ",i4); 2105 tty->cr(); 2106 2107 // Dump lo-degree list 2108 tty->print("Hi degree: "); 2109 for(uint i5 = _hi_degree; i5; i5 = lrgs(i5)._next ) 2110 tty->print("L%d ",i5); 2111 tty->cr(); 2112 } 2113 2114 void PhaseChaitin::dump_degree_lists() const { 2115 // Dump lo-degree list 2116 tty->print("Lo degree: "); 2117 for( uint i = _lo_degree; i; i = lrgs(i)._next ) 2118 tty->print("L%d ",i); 2119 tty->cr(); 2120 2121 // Dump lo-stk-degree list 2122 tty->print("Lo stk degree: "); 2123 for(uint i2 = _lo_stk_degree; i2; i2 = lrgs(i2)._next ) 2124 tty->print("L%d ",i2); 2125 tty->cr(); 2126 2127 // Dump lo-degree list 2128 tty->print("Hi degree: "); 2129 for(uint i3 = _hi_degree; i3; i3 = lrgs(i3)._next ) 2130 tty->print("L%d ",i3); 2131 tty->cr(); 2132 } 2133 2134 void PhaseChaitin::dump_simplified() const { 2135 tty->print("Simplified: "); 2136 for( uint i = _simplified; i; i = lrgs(i)._next ) 2137 tty->print("L%d ",i); 2138 tty->cr(); 2139 } 2140 2141 static char *print_reg(OptoReg::Name reg, const PhaseChaitin* pc, char* buf) { 2142 if ((int)reg < 0) 2143 sprintf(buf, "<OptoReg::%d>", (int)reg); 2144 else if (OptoReg::is_reg(reg)) 2145 strcpy(buf, Matcher::regName[reg]); 2146 else 2147 sprintf(buf,"%s + #%d",OptoReg::regname(OptoReg::c_frame_pointer), 2148 pc->reg2offset(reg)); 2149 return buf+strlen(buf); 2150 } 2151 2152 // Dump a register name into a buffer. Be intelligent if we get called 2153 // before allocation is complete. 2154 char *PhaseChaitin::dump_register(const Node* n, char* buf) const { 2155 if( _node_regs ) { 2156 // Post allocation, use direct mappings, no LRG info available 2157 print_reg( get_reg_first(n), this, buf ); 2158 } else { 2159 uint lidx = _lrg_map.find_const(n); // Grab LRG number 2160 if( !_ifg ) { 2161 sprintf(buf,"L%d",lidx); // No register binding yet 2162 } else if( !lidx ) { // Special, not allocated value 2163 strcpy(buf,"Special"); 2164 } else { 2165 if (lrgs(lidx)._is_vector) { 2166 if (lrgs(lidx).mask().is_bound_set(lrgs(lidx).num_regs())) 2167 print_reg( lrgs(lidx).reg(), this, buf ); // a bound machine register 2168 else 2169 sprintf(buf,"L%d",lidx); // No register binding yet 2170 } else if( (lrgs(lidx).num_regs() == 1) 2171 ? lrgs(lidx).mask().is_bound1() 2172 : lrgs(lidx).mask().is_bound_pair() ) { 2173 // Hah! We have a bound machine register 2174 print_reg( lrgs(lidx).reg(), this, buf ); 2175 } else { 2176 sprintf(buf,"L%d",lidx); // No register binding yet 2177 } 2178 } 2179 } 2180 return buf+strlen(buf); 2181 } 2182 2183 void PhaseChaitin::dump_for_spill_split_recycle() const { 2184 if( WizardMode && (PrintCompilation || PrintOpto) ) { 2185 // Display which live ranges need to be split and the allocator's state 2186 tty->print_cr("Graph-Coloring Iteration %d will split the following live ranges", _trip_cnt); 2187 for (uint bidx = 1; bidx < _lrg_map.max_lrg_id(); bidx++) { 2188 if( lrgs(bidx).alive() && lrgs(bidx).reg() >= LRG::SPILL_REG ) { 2189 tty->print("L%d: ", bidx); 2190 lrgs(bidx).dump(); 2191 } 2192 } 2193 tty->cr(); 2194 dump(); 2195 } 2196 } 2197 2198 void PhaseChaitin::dump_frame() const { 2199 const char *fp = OptoReg::regname(OptoReg::c_frame_pointer); 2200 const TypeTuple *domain = C->tf()->domain(); 2201 const int argcnt = domain->cnt() - TypeFunc::Parms; 2202 2203 // Incoming arguments in registers dump 2204 for( int k = 0; k < argcnt; k++ ) { 2205 OptoReg::Name parmreg = _matcher._parm_regs[k].first(); 2206 if( OptoReg::is_reg(parmreg)) { 2207 const char *reg_name = OptoReg::regname(parmreg); 2208 tty->print("#r%3.3d %s", parmreg, reg_name); 2209 parmreg = _matcher._parm_regs[k].second(); 2210 if( OptoReg::is_reg(parmreg)) { 2211 tty->print(":%s", OptoReg::regname(parmreg)); 2212 } 2213 tty->print(" : parm %d: ", k); 2214 domain->field_at(k + TypeFunc::Parms)->dump(); 2215 tty->cr(); 2216 } 2217 } 2218 2219 // Check for un-owned padding above incoming args 2220 OptoReg::Name reg = _matcher._new_SP; 2221 if( reg > _matcher._in_arg_limit ) { 2222 reg = OptoReg::add(reg, -1); 2223 tty->print_cr("#r%3.3d %s+%2d: pad0, owned by CALLER", reg, fp, reg2offset_unchecked(reg)); 2224 } 2225 2226 // Incoming argument area dump 2227 OptoReg::Name begin_in_arg = OptoReg::add(_matcher._old_SP,C->out_preserve_stack_slots()); 2228 while( reg > begin_in_arg ) { 2229 reg = OptoReg::add(reg, -1); 2230 tty->print("#r%3.3d %s+%2d: ",reg,fp,reg2offset_unchecked(reg)); 2231 int j; 2232 for( j = 0; j < argcnt; j++) { 2233 if( _matcher._parm_regs[j].first() == reg || 2234 _matcher._parm_regs[j].second() == reg ) { 2235 tty->print("parm %d: ",j); 2236 domain->field_at(j + TypeFunc::Parms)->dump(); 2237 tty->cr(); 2238 break; 2239 } 2240 } 2241 if( j >= argcnt ) 2242 tty->print_cr("HOLE, owned by SELF"); 2243 } 2244 2245 // Old outgoing preserve area 2246 while( reg > _matcher._old_SP ) { 2247 reg = OptoReg::add(reg, -1); 2248 tty->print_cr("#r%3.3d %s+%2d: old out preserve",reg,fp,reg2offset_unchecked(reg)); 2249 } 2250 2251 // Old SP 2252 tty->print_cr("# -- Old %s -- Framesize: %d --",fp, 2253 reg2offset_unchecked(OptoReg::add(_matcher._old_SP,-1)) - reg2offset_unchecked(_matcher._new_SP)+jintSize); 2254 2255 // Preserve area dump 2256 int fixed_slots = C->fixed_slots(); 2257 OptoReg::Name begin_in_preserve = OptoReg::add(_matcher._old_SP, -(int)C->in_preserve_stack_slots()); 2258 OptoReg::Name return_addr = _matcher.return_addr(); 2259 2260 reg = OptoReg::add(reg, -1); 2261 while (OptoReg::is_stack(reg)) { 2262 tty->print("#r%3.3d %s+%2d: ",reg,fp,reg2offset_unchecked(reg)); 2263 if (return_addr == reg) { 2264 tty->print_cr("return address"); 2265 } else if (reg >= begin_in_preserve) { 2266 // Preserved slots are present on x86 2267 if (return_addr == OptoReg::add(reg, VMRegImpl::slots_per_word)) 2268 tty->print_cr("saved fp register"); 2269 else if (return_addr == OptoReg::add(reg, 2*VMRegImpl::slots_per_word) && 2270 VerifyStackAtCalls) 2271 tty->print_cr("0xBADB100D +VerifyStackAtCalls"); 2272 else 2273 tty->print_cr("in_preserve"); 2274 } else if ((int)OptoReg::reg2stack(reg) < fixed_slots) { 2275 tty->print_cr("Fixed slot %d", OptoReg::reg2stack(reg)); 2276 } else { 2277 tty->print_cr("pad2, stack alignment"); 2278 } 2279 reg = OptoReg::add(reg, -1); 2280 } 2281 2282 // Spill area dump 2283 reg = OptoReg::add(_matcher._new_SP, _framesize ); 2284 while( reg > _matcher._out_arg_limit ) { 2285 reg = OptoReg::add(reg, -1); 2286 tty->print_cr("#r%3.3d %s+%2d: spill",reg,fp,reg2offset_unchecked(reg)); 2287 } 2288 2289 // Outgoing argument area dump 2290 while( reg > OptoReg::add(_matcher._new_SP, C->out_preserve_stack_slots()) ) { 2291 reg = OptoReg::add(reg, -1); 2292 tty->print_cr("#r%3.3d %s+%2d: outgoing argument",reg,fp,reg2offset_unchecked(reg)); 2293 } 2294 2295 // Outgoing new preserve area 2296 while( reg > _matcher._new_SP ) { 2297 reg = OptoReg::add(reg, -1); 2298 tty->print_cr("#r%3.3d %s+%2d: new out preserve",reg,fp,reg2offset_unchecked(reg)); 2299 } 2300 tty->print_cr("#"); 2301 } 2302 2303 void PhaseChaitin::dump_bb(uint pre_order) const { 2304 tty->print_cr("---dump of B%d---",pre_order); 2305 for (uint i = 0; i < _cfg.number_of_blocks(); i++) { 2306 Block* block = _cfg.get_block(i); 2307 if (block->_pre_order == pre_order) { 2308 dump(block); 2309 } 2310 } 2311 } 2312 2313 void PhaseChaitin::dump_lrg(uint lidx, bool defs_only) const { 2314 tty->print_cr("---dump of L%d---",lidx); 2315 2316 if (_ifg) { 2317 if (lidx >= _lrg_map.max_lrg_id()) { 2318 tty->print("Attempt to print live range index beyond max live range.\n"); 2319 return; 2320 } 2321 tty->print("L%d: ",lidx); 2322 if (lidx < _ifg->_maxlrg) { 2323 lrgs(lidx).dump(); 2324 } else { 2325 tty->print_cr("new LRG"); 2326 } 2327 } 2328 if( _ifg && lidx < _ifg->_maxlrg) { 2329 tty->print("Neighbors: %d - ", _ifg->neighbor_cnt(lidx)); 2330 _ifg->neighbors(lidx)->dump(); 2331 tty->cr(); 2332 } 2333 // For all blocks 2334 for (uint i = 0; i < _cfg.number_of_blocks(); i++) { 2335 Block* block = _cfg.get_block(i); 2336 int dump_once = 0; 2337 2338 // For all instructions 2339 for( uint j = 0; j < block->number_of_nodes(); j++ ) { 2340 Node *n = block->get_node(j); 2341 if (_lrg_map.find_const(n) == lidx) { 2342 if (!dump_once++) { 2343 tty->cr(); 2344 block->dump_head(&_cfg); 2345 } 2346 dump(n); 2347 continue; 2348 } 2349 if (!defs_only) { 2350 uint cnt = n->req(); 2351 for( uint k = 1; k < cnt; k++ ) { 2352 Node *m = n->in(k); 2353 if (!m) { 2354 continue; // be robust in the dumper 2355 } 2356 if (_lrg_map.find_const(m) == lidx) { 2357 if (!dump_once++) { 2358 tty->cr(); 2359 block->dump_head(&_cfg); 2360 } 2361 dump(n); 2362 } 2363 } 2364 } 2365 } 2366 } // End of per-block dump 2367 tty->cr(); 2368 } 2369 #endif // not PRODUCT 2370 2371 #ifdef ASSERT 2372 // Verify that base pointers and derived pointers are still sane. 2373 void PhaseChaitin::verify_base_ptrs(ResourceArea* a) const { 2374 Unique_Node_List worklist(a); 2375 for (uint i = 0; i < _cfg.number_of_blocks(); i++) { 2376 Block* block = _cfg.get_block(i); 2377 for (uint j = block->end_idx() + 1; j > 1; j--) { 2378 Node* n = block->get_node(j-1); 2379 if (n->is_Phi()) { 2380 break; 2381 } 2382 // Found a safepoint? 2383 if (n->is_MachSafePoint()) { 2384 MachSafePointNode* sfpt = n->as_MachSafePoint(); 2385 JVMState* jvms = sfpt->jvms(); 2386 if (jvms != NULL) { 2387 // Now scan for a live derived pointer 2388 if (jvms->oopoff() < sfpt->req()) { 2389 // Check each derived/base pair 2390 for (uint idx = jvms->oopoff(); idx < sfpt->req(); idx++) { 2391 Node* check = sfpt->in(idx); 2392 bool is_derived = ((idx - jvms->oopoff()) & 1) == 0; 2393 // search upwards through spills and spill phis for AddP 2394 worklist.clear(); 2395 worklist.push(check); 2396 uint k = 0; 2397 while (k < worklist.size()) { 2398 check = worklist.at(k); 2399 assert(check, "Bad base or derived pointer"); 2400 // See PhaseChaitin::find_base_for_derived() for all cases. 2401 int isc = check->is_Copy(); 2402 if (isc) { 2403 worklist.push(check->in(isc)); 2404 } else if (check->is_Phi()) { 2405 for (uint m = 1; m < check->req(); m++) { 2406 worklist.push(check->in(m)); 2407 } 2408 } else if (check->is_Con()) { 2409 if (is_derived) { 2410 // Derived is NULL+offset 2411 assert(!is_derived || check->bottom_type()->is_ptr()->ptr() == TypePtr::Null, "Bad derived pointer"); 2412 } else { 2413 assert(check->bottom_type()->is_ptr()->_offset == 0, "Bad base pointer"); 2414 // Base either ConP(NULL) or loadConP 2415 if (check->is_Mach()) { 2416 assert(check->as_Mach()->ideal_Opcode() == Op_ConP, "Bad base pointer"); 2417 } else { 2418 assert(check->Opcode() == Op_ConP && 2419 check->bottom_type()->is_ptr()->ptr() == TypePtr::Null, "Bad base pointer"); 2420 } 2421 } 2422 } else if (check->bottom_type()->is_ptr()->_offset == 0) { 2423 if (check->is_Proj() || (check->is_Mach() && 2424 (check->as_Mach()->ideal_Opcode() == Op_CreateEx || 2425 check->as_Mach()->ideal_Opcode() == Op_ThreadLocal || 2426 check->as_Mach()->ideal_Opcode() == Op_CMoveP || 2427 check->as_Mach()->ideal_Opcode() == Op_CheckCastPP || 2428 #ifdef _LP64 2429 (UseCompressedOops && check->as_Mach()->ideal_Opcode() == Op_CastPP) || 2430 (UseCompressedOops && check->as_Mach()->ideal_Opcode() == Op_DecodeN) || 2431 (UseCompressedClassPointers && check->as_Mach()->ideal_Opcode() == Op_DecodeNKlass) || 2432 #endif // _LP64 2433 check->as_Mach()->ideal_Opcode() == Op_LoadP || 2434 check->as_Mach()->ideal_Opcode() == Op_LoadKlass))) { 2435 // Valid nodes 2436 } else { 2437 check->dump(); 2438 assert(false, "Bad base or derived pointer"); 2439 } 2440 } else { 2441 assert(is_derived, "Bad base pointer"); 2442 assert(check->is_Mach() && check->as_Mach()->ideal_Opcode() == Op_AddP, "Bad derived pointer"); 2443 } 2444 k++; 2445 assert(k < 100000, "Derived pointer checking in infinite loop"); 2446 } // End while 2447 } 2448 } // End of check for derived pointers 2449 } // End of Kcheck for debug info 2450 } // End of if found a safepoint 2451 } // End of forall instructions in block 2452 } // End of forall blocks 2453 } 2454 2455 // Verify that graphs and base pointers are still sane. 2456 void PhaseChaitin::verify(ResourceArea* a, bool verify_ifg) const { 2457 if (VerifyRegisterAllocator) { 2458 _cfg.verify(); 2459 verify_base_ptrs(a); 2460 if (verify_ifg) { 2461 _ifg->verify(this); 2462 } 2463 } 2464 } 2465 #endif // ASSERT 2466 2467 int PhaseChaitin::_final_loads = 0; 2468 int PhaseChaitin::_final_stores = 0; 2469 int PhaseChaitin::_final_memoves= 0; 2470 int PhaseChaitin::_final_copies = 0; 2471 double PhaseChaitin::_final_load_cost = 0; 2472 double PhaseChaitin::_final_store_cost = 0; 2473 double PhaseChaitin::_final_memove_cost= 0; 2474 double PhaseChaitin::_final_copy_cost = 0; 2475 int PhaseChaitin::_conserv_coalesce = 0; 2476 int PhaseChaitin::_conserv_coalesce_pair = 0; 2477 int PhaseChaitin::_conserv_coalesce_trie = 0; 2478 int PhaseChaitin::_conserv_coalesce_quad = 0; 2479 int PhaseChaitin::_post_alloc = 0; 2480 int PhaseChaitin::_lost_opp_pp_coalesce = 0; 2481 int PhaseChaitin::_lost_opp_cflow_coalesce = 0; 2482 int PhaseChaitin::_used_cisc_instructions = 0; 2483 int PhaseChaitin::_unused_cisc_instructions = 0; 2484 int PhaseChaitin::_allocator_attempts = 0; 2485 int PhaseChaitin::_allocator_successes = 0; 2486 2487 #ifndef PRODUCT 2488 uint PhaseChaitin::_high_pressure = 0; 2489 uint PhaseChaitin::_low_pressure = 0; 2490 2491 void PhaseChaitin::print_chaitin_statistics() { 2492 tty->print_cr("Inserted %d spill loads, %d spill stores, %d mem-mem moves and %d copies.", _final_loads, _final_stores, _final_memoves, _final_copies); 2493 tty->print_cr("Total load cost= %6.0f, store cost = %6.0f, mem-mem cost = %5.2f, copy cost = %5.0f.", _final_load_cost, _final_store_cost, _final_memove_cost, _final_copy_cost); 2494 tty->print_cr("Adjusted spill cost = %7.0f.", 2495 _final_load_cost*4.0 + _final_store_cost * 2.0 + 2496 _final_copy_cost*1.0 + _final_memove_cost*12.0); 2497 tty->print("Conservatively coalesced %d copies, %d pairs", 2498 _conserv_coalesce, _conserv_coalesce_pair); 2499 if( _conserv_coalesce_trie || _conserv_coalesce_quad ) 2500 tty->print(", %d tries, %d quads", _conserv_coalesce_trie, _conserv_coalesce_quad); 2501 tty->print_cr(", %d post alloc.", _post_alloc); 2502 if( _lost_opp_pp_coalesce || _lost_opp_cflow_coalesce ) 2503 tty->print_cr("Lost coalesce opportunity, %d private-private, and %d cflow interfered.", 2504 _lost_opp_pp_coalesce, _lost_opp_cflow_coalesce ); 2505 if( _used_cisc_instructions || _unused_cisc_instructions ) 2506 tty->print_cr("Used cisc instruction %d, remained in register %d", 2507 _used_cisc_instructions, _unused_cisc_instructions); 2508 if( _allocator_successes != 0 ) 2509 tty->print_cr("Average allocation trips %f", (float)_allocator_attempts/(float)_allocator_successes); 2510 tty->print_cr("High Pressure Blocks = %d, Low Pressure Blocks = %d", _high_pressure, _low_pressure); 2511 } 2512 #endif // not PRODUCT