< prev index next >

src/hotspot/share/opto/postaloc.cpp

Print this page
rev 60615 : 8231441: Initial SVE backend support
Reviewed-by: adinn, pli
Contributed-by: joshua.zhu@arm.com, yang.zhang@arm.com, ningsheng.jian@arm.com
   1 /*
   2  * Copyright (c) 1998, 2016, Oracle and/or its affiliates. All rights reserved.
   3  * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
   4  *
   5  * This code is free software; you can redistribute it and/or modify it
   6  * under the terms of the GNU General Public License version 2 only, as
   7  * published by the Free Software Foundation.
   8  *
   9  * This code is distributed in the hope that it will be useful, but WITHOUT
  10  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  11  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
  12  * version 2 for more details (a copy is included in the LICENSE file that
  13  * accompanied this code).
  14  *
  15  * You should have received a copy of the GNU General Public License version
  16  * 2 along with this work; if not, write to the Free Software Foundation,
  17  * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
  18  *
  19  * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
  20  * or visit www.oracle.com if you need additional information or have any
  21  * questions.
  22  *


 249       break; // Failed for some cutout?
 250     }
 251     x = copy;                   // Progress, try again
 252   }
 253 
 254   // Phis and 2-address instructions cannot change registers so easily - their
 255   // outputs must match their input.
 256   if( !can_change_regs )
 257     return blk_adjust;          // Only check stupid copies!
 258 
 259   // Loop backedges won't have a value-mapping yet
 260   if( &value == NULL ) return blk_adjust;
 261 
 262   // Skip through all copies to the _value_ being used.  Do not change from
 263   // int to pointer.  This attempts to jump through a chain of copies, where
 264   // intermediate copies might be illegal, i.e., value is stored down to stack
 265   // then reloaded BUT survives in a register the whole way.
 266   Node *val = skip_copies(n->in(k));
 267   if (val == x) return blk_adjust; // No progress?
 268 
 269   int n_regs = RegMask::num_registers(val->ideal_reg());
 270   uint val_idx = _lrg_map.live_range_id(val);
 271   OptoReg::Name val_reg = lrgs(val_idx).reg();

 272 
 273   // See if it happens to already be in the correct register!
 274   // (either Phi's direct register, or the common case of the name
 275   // never-clobbered original-def register)
 276   if (register_contains_value(val, val_reg, n_regs, value)) {
 277     blk_adjust += use_prior_register(n,k,regnd[val_reg],current_block,value,regnd);
 278     if( n->in(k) == regnd[val_reg] ) // Success!  Quit trying
 279       return blk_adjust;
 280   }
 281 
 282   // See if we can skip the copy by changing registers.  Don't change from
 283   // using a register to using the stack unless we know we can remove a
 284   // copy-load.  Otherwise we might end up making a pile of Intel cisc-spill
 285   // ops reading from memory instead of just loading once and using the
 286   // register.
 287 
 288   // Also handle duplicate copies here.
 289   const Type *t = val->is_Con() ? val->bottom_type() : NULL;
 290 
 291   // Scan all registers to see if this value is around already
 292   for( uint reg = 0; reg < (uint)_max_reg; reg++ ) {
 293     if (reg == (uint)nk_reg) {
 294       // Found ourselves so check if there is only one user of this
 295       // copy and keep on searching for a better copy if so.
 296       bool ignore_self = true;
 297       x = n->in(k);
 298       DUIterator_Fast imax, i = x->fast_outs(imax);
 299       Node* first = x->fast_out(i); i++;
 300       while (i < imax && ignore_self) {
 301         Node* use = x->fast_out(i); i++;
 302         if (use != first) ignore_self = false;
 303       }
 304       if (ignore_self) continue;
 305     }
 306 
 307     Node *vv = value[reg];











 308     if (n_regs > 1) { // Doubles and vectors check for aligned-adjacent set
 309       uint last = (n_regs-1); // Looking for the last part of a set







 310       if ((reg&last) != last) continue; // Wrong part of a set
 311       if (!register_contains_value(vv, reg, n_regs, value)) continue; // Different value
 312     }
 313     if( vv == val ||            // Got a direct hit?
 314         (t && vv && vv->bottom_type() == t && vv->is_Mach() &&
 315          vv->as_Mach()->rule() == val->as_Mach()->rule()) ) { // Or same constant?
 316       assert( !n->is_Phi(), "cannot change registers at a Phi so easily" );
 317       if( OptoReg::is_stack(nk_reg) || // CISC-loading from stack OR
 318           OptoReg::is_reg(reg) || // turning into a register use OR
 319           regnd[reg]->outcnt()==1 ) { // last use of a spill-load turns into a CISC use
 320         blk_adjust += use_prior_register(n,k,regnd[reg],current_block,value,regnd);
 321         if( n->in(k) == regnd[reg] ) // Success!  Quit trying
 322           return blk_adjust;
 323       } // End of if not degrading to a stack
 324     } // End of if found value in another register
 325   } // End of scan all machine registers
 326   return blk_adjust;
 327 }
 328 
 329 


 574       for (j = 1; j < block->num_preds(); j++) {
 575         Block* pb = _cfg.get_block_for_node(block->pred(j));
 576         if (pb == freed) {
 577           continue; // Did self already via freelist
 578         }
 579         Node_List &p_regnd = *blk2regnd[pb->_pre_order];
 580         for( uint k = 0; k < (uint)_max_reg; k++ ) {
 581           if( regnd[k] != p_regnd[k] ) { // Conflict on reaching defs?
 582             value.map(k,NULL); // Then no value handy
 583             regnd.map(k,NULL);
 584           }
 585         }
 586       }
 587     }
 588 
 589     // For all Phi's
 590     for (j = 1; j < phi_dex; j++) {
 591       uint k;
 592       Node *phi = block->get_node(j);
 593       uint pidx = _lrg_map.live_range_id(phi);
 594       OptoReg::Name preg = lrgs(_lrg_map.live_range_id(phi)).reg();
 595 
 596       // Remove copies remaining on edges.  Check for junk phi.
 597       Node *u = NULL;
 598       for (k = 1; k < phi->req(); k++) {
 599         Node *x = phi->in(k);
 600         if( phi != x && u != x ) // Found a different input
 601           u = u ? NodeSentinel : x; // Capture unique input, or NodeSentinel for 2nd input
 602       }
 603       if (u != NodeSentinel) {    // Junk Phi.  Remove
 604         phi->replace_by(u);
 605         j -= yank_if_dead(phi, block, &value, &regnd);
 606         phi_dex--;
 607         continue;
 608       }
 609       // Note that if value[pidx] exists, then we merged no new values here
 610       // and the phi is useless.  This can happen even with the above phi
 611       // removal for complex flows.  I cannot keep the better known value here
 612       // because locally the phi appears to define a new merged value.  If I
 613       // keep the better value then a copy of the phi, being unable to use the
 614       // global flow analysis, can't "peek through" the phi to the original
 615       // reaching value and so will act like it's defining a new value.  This
 616       // can lead to situations where some uses are from the old and some from
 617       // the new values.  Not illegal by itself but throws the over-strong
 618       // assert in scheduling.
 619       if( pidx ) {
 620         value.map(preg,phi);
 621         regnd.map(preg,phi);
 622         int n_regs = RegMask::num_registers(phi->ideal_reg());
 623         for (int l = 1; l < n_regs; l++) {
 624           OptoReg::Name preg_lo = OptoReg::add(preg,-l);
 625           value.map(preg_lo,phi);
 626           regnd.map(preg_lo,phi);
 627         }
 628       }
 629     }
 630 
 631     // For all remaining instructions
 632     for (j = phi_dex; j < block->number_of_nodes(); j++) {
 633       Node* n = block->get_node(j);
 634 
 635       if(n->outcnt() == 0 &&   // Dead?
 636          n != C->top() &&      // (ignore TOP, it has no du info)
 637          !n->is_Proj() ) {     // fat-proj kills
 638         j -= yank_if_dead(n, block, &value, &regnd);
 639         continue;
 640       }
 641 
 642       // Improve reaching-def info.  Occasionally post-alloc's liveness gives


 646       // advantage of this info to set a reaching def for the use-reg.
 647       uint k;
 648       for (k = 1; k < n->req(); k++) {
 649         Node *def = n->in(k);   // n->in(k) is a USE; def is the DEF for this USE
 650         guarantee(def != NULL, "no disconnected nodes at this point");
 651         uint useidx = _lrg_map.live_range_id(def); // useidx is the live range index for this USE
 652 
 653         if( useidx ) {
 654           OptoReg::Name ureg = lrgs(useidx).reg();
 655           if( !value[ureg] ) {
 656             int idx;            // Skip occasional useless copy
 657             while( (idx=def->is_Copy()) != 0 &&
 658                    def->in(idx) != NULL &&  // NULL should not happen
 659                    ureg == lrgs(_lrg_map.live_range_id(def->in(idx))).reg())
 660               def = def->in(idx);
 661             Node *valdef = skip_copies(def); // tighten up val through non-useless copies
 662             value.map(ureg,valdef); // record improved reaching-def info
 663             regnd.map(ureg,   def);
 664             // Record other half of doubles
 665             uint def_ideal_reg = def->ideal_reg();
 666             int n_regs = RegMask::num_registers(def_ideal_reg);
 667             for (int l = 1; l < n_regs; l++) {
 668               OptoReg::Name ureg_lo = OptoReg::add(ureg,-l);
 669               if (!value[ureg_lo] &&
 670                   (!RegMask::can_represent(ureg_lo) ||
 671                    lrgs(useidx).mask().Member(ureg_lo))) { // Nearly always adjacent
 672                 value.map(ureg_lo,valdef); // record improved reaching-def info
 673                 regnd.map(ureg_lo,   def);
 674               }
 675             }
 676           }
 677         }
 678       }
 679 
 680       const uint two_adr = n->is_Mach() ? n->as_Mach()->two_adr() : 0;
 681 
 682       // Remove copies along input edges
 683       for (k = 1; k < n->req(); k++) {
 684         j -= elide_copy(n, k, block, value, regnd, two_adr != k);
 685       }
 686 


 690         continue;
 691       }
 692 
 693       // Update the register defined by this instruction
 694       OptoReg::Name nreg = lrgs(lidx).reg();
 695       // Skip through all copies to the _value_ being defined.
 696       // Do not change from int to pointer
 697       Node *val = skip_copies(n);
 698 
 699       // Clear out a dead definition before starting so that the
 700       // elimination code doesn't have to guard against it.  The
 701       // definition could in fact be a kill projection with a count of
 702       // 0 which is safe but since those are uninteresting for copy
 703       // elimination just delete them as well.
 704       if (regnd[nreg] != NULL && regnd[nreg]->outcnt() == 0) {
 705         regnd.map(nreg, NULL);
 706         value.map(nreg, NULL);
 707       }
 708 
 709       uint n_ideal_reg = n->ideal_reg();
 710       int n_regs = RegMask::num_registers(n_ideal_reg);
 711       if (n_regs == 1) {
 712         // If Node 'n' does not change the value mapped by the register,
 713         // then 'n' is a useless copy.  Do not update the register->node
 714         // mapping so 'n' will go dead.
 715         if( value[nreg] != val ) {
 716           if (eliminate_copy_of_constant(val, n, block, value, regnd, nreg, OptoReg::Bad)) {
 717             j -= replace_and_yank_if_dead(n, nreg, block, value, regnd);
 718           } else {
 719             // Update the mapping: record new Node defined by the register
 720             regnd.map(nreg,n);
 721             // Update mapping for defined *value*, which is the defined
 722             // Node after skipping all copies.
 723             value.map(nreg,val);
 724           }
 725         } else if( !may_be_copy_of_callee(n) ) {
 726           assert(n->is_Copy(), "");
 727           j -= replace_and_yank_if_dead(n, nreg, block, value, regnd);
 728         }
 729       } else if (RegMask::is_vector(n_ideal_reg)) {
 730         // If Node 'n' does not change the value mapped by the register,


   1 /*
   2  * Copyright (c) 1998, 2020, Oracle and/or its affiliates. All rights reserved.
   3  * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
   4  *
   5  * This code is free software; you can redistribute it and/or modify it
   6  * under the terms of the GNU General Public License version 2 only, as
   7  * published by the Free Software Foundation.
   8  *
   9  * This code is distributed in the hope that it will be useful, but WITHOUT
  10  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  11  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
  12  * version 2 for more details (a copy is included in the LICENSE file that
  13  * accompanied this code).
  14  *
  15  * You should have received a copy of the GNU General Public License version
  16  * 2 along with this work; if not, write to the Free Software Foundation,
  17  * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
  18  *
  19  * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
  20  * or visit www.oracle.com if you need additional information or have any
  21  * questions.
  22  *


 249       break; // Failed for some cutout?
 250     }
 251     x = copy;                   // Progress, try again
 252   }
 253 
 254   // Phis and 2-address instructions cannot change registers so easily - their
 255   // outputs must match their input.
 256   if( !can_change_regs )
 257     return blk_adjust;          // Only check stupid copies!
 258 
 259   // Loop backedges won't have a value-mapping yet
 260   if( &value == NULL ) return blk_adjust;
 261 
 262   // Skip through all copies to the _value_ being used.  Do not change from
 263   // int to pointer.  This attempts to jump through a chain of copies, where
 264   // intermediate copies might be illegal, i.e., value is stored down to stack
 265   // then reloaded BUT survives in a register the whole way.
 266   Node *val = skip_copies(n->in(k));
 267   if (val == x) return blk_adjust; // No progress?
 268 

 269   uint val_idx = _lrg_map.live_range_id(val);
 270   OptoReg::Name val_reg = lrgs(val_idx).reg();
 271   int n_regs = RegMask::num_registers(val->ideal_reg(), lrgs(val_idx));
 272 
 273   // See if it happens to already be in the correct register!
 274   // (either Phi's direct register, or the common case of the name
 275   // never-clobbered original-def register)
 276   if (register_contains_value(val, val_reg, n_regs, value)) {
 277     blk_adjust += use_prior_register(n,k,regnd[val_reg],current_block,value,regnd);
 278     if( n->in(k) == regnd[val_reg] ) // Success!  Quit trying
 279       return blk_adjust;
 280   }
 281 
 282   // See if we can skip the copy by changing registers.  Don't change from
 283   // using a register to using the stack unless we know we can remove a
 284   // copy-load.  Otherwise we might end up making a pile of Intel cisc-spill
 285   // ops reading from memory instead of just loading once and using the
 286   // register.
 287 
 288   // Also handle duplicate copies here.
 289   const Type *t = val->is_Con() ? val->bottom_type() : NULL;
 290 
 291   // Scan all registers to see if this value is around already
 292   for( uint reg = 0; reg < (uint)_max_reg; reg++ ) {
 293     if (reg == (uint)nk_reg) {
 294       // Found ourselves so check if there is only one user of this
 295       // copy and keep on searching for a better copy if so.
 296       bool ignore_self = true;
 297       x = n->in(k);
 298       DUIterator_Fast imax, i = x->fast_outs(imax);
 299       Node* first = x->fast_out(i); i++;
 300       while (i < imax && ignore_self) {
 301         Node* use = x->fast_out(i); i++;
 302         if (use != first) ignore_self = false;
 303       }
 304       if (ignore_self) continue;
 305     }
 306 
 307     Node *vv = value[reg];
 308     // For scalable register, number of registers may be inconsistent between
 309     // "val_reg" and "reg". For example, when "val" resides in register
 310     // but "reg" is located in stack.
 311     if (lrgs(val_idx).is_scalable()) {
 312       assert(val->ideal_reg() == Op_VecA, "scalable vector register");
 313       if (OptoReg::is_stack(reg)) {
 314         n_regs = lrgs(val_idx).scalable_reg_slots();
 315       } else {
 316         n_regs = RegMask::SlotsPerVecA;
 317       }
 318     }
 319     if (n_regs > 1) { // Doubles and vectors check for aligned-adjacent set
 320       uint last;
 321       if (lrgs(val_idx).is_scalable()) {
 322         assert(val->ideal_reg() == Op_VecA, "scalable vector register");
 323         // For scalable vector register, regmask is always SlotsPerVecA bits aligned
 324         last = RegMask::SlotsPerVecA - 1;
 325       } else {
 326         last = (n_regs-1); // Looking for the last part of a set
 327       }
 328       if ((reg&last) != last) continue; // Wrong part of a set
 329       if (!register_contains_value(vv, reg, n_regs, value)) continue; // Different value
 330     }
 331     if( vv == val ||            // Got a direct hit?
 332         (t && vv && vv->bottom_type() == t && vv->is_Mach() &&
 333          vv->as_Mach()->rule() == val->as_Mach()->rule()) ) { // Or same constant?
 334       assert( !n->is_Phi(), "cannot change registers at a Phi so easily" );
 335       if( OptoReg::is_stack(nk_reg) || // CISC-loading from stack OR
 336           OptoReg::is_reg(reg) || // turning into a register use OR
 337           regnd[reg]->outcnt()==1 ) { // last use of a spill-load turns into a CISC use
 338         blk_adjust += use_prior_register(n,k,regnd[reg],current_block,value,regnd);
 339         if( n->in(k) == regnd[reg] ) // Success!  Quit trying
 340           return blk_adjust;
 341       } // End of if not degrading to a stack
 342     } // End of if found value in another register
 343   } // End of scan all machine registers
 344   return blk_adjust;
 345 }
 346 
 347 


 592       for (j = 1; j < block->num_preds(); j++) {
 593         Block* pb = _cfg.get_block_for_node(block->pred(j));
 594         if (pb == freed) {
 595           continue; // Did self already via freelist
 596         }
 597         Node_List &p_regnd = *blk2regnd[pb->_pre_order];
 598         for( uint k = 0; k < (uint)_max_reg; k++ ) {
 599           if( regnd[k] != p_regnd[k] ) { // Conflict on reaching defs?
 600             value.map(k,NULL); // Then no value handy
 601             regnd.map(k,NULL);
 602           }
 603         }
 604       }
 605     }
 606 
 607     // For all Phi's
 608     for (j = 1; j < phi_dex; j++) {
 609       uint k;
 610       Node *phi = block->get_node(j);
 611       uint pidx = _lrg_map.live_range_id(phi);
 612       OptoReg::Name preg = lrgs(pidx).reg();
 613 
 614       // Remove copies remaining on edges.  Check for junk phi.
 615       Node *u = NULL;
 616       for (k = 1; k < phi->req(); k++) {
 617         Node *x = phi->in(k);
 618         if( phi != x && u != x ) // Found a different input
 619           u = u ? NodeSentinel : x; // Capture unique input, or NodeSentinel for 2nd input
 620       }
 621       if (u != NodeSentinel) {    // Junk Phi.  Remove
 622         phi->replace_by(u);
 623         j -= yank_if_dead(phi, block, &value, &regnd);
 624         phi_dex--;
 625         continue;
 626       }
 627       // Note that if value[pidx] exists, then we merged no new values here
 628       // and the phi is useless.  This can happen even with the above phi
 629       // removal for complex flows.  I cannot keep the better known value here
 630       // because locally the phi appears to define a new merged value.  If I
 631       // keep the better value then a copy of the phi, being unable to use the
 632       // global flow analysis, can't "peek through" the phi to the original
 633       // reaching value and so will act like it's defining a new value.  This
 634       // can lead to situations where some uses are from the old and some from
 635       // the new values.  Not illegal by itself but throws the over-strong
 636       // assert in scheduling.
 637       if( pidx ) {
 638         value.map(preg,phi);
 639         regnd.map(preg,phi);
 640         int n_regs = RegMask::num_registers(phi->ideal_reg(), lrgs(pidx));
 641         for (int l = 1; l < n_regs; l++) {
 642           OptoReg::Name preg_lo = OptoReg::add(preg,-l);
 643           value.map(preg_lo,phi);
 644           regnd.map(preg_lo,phi);
 645         }
 646       }
 647     }
 648 
 649     // For all remaining instructions
 650     for (j = phi_dex; j < block->number_of_nodes(); j++) {
 651       Node* n = block->get_node(j);
 652 
 653       if(n->outcnt() == 0 &&   // Dead?
 654          n != C->top() &&      // (ignore TOP, it has no du info)
 655          !n->is_Proj() ) {     // fat-proj kills
 656         j -= yank_if_dead(n, block, &value, &regnd);
 657         continue;
 658       }
 659 
 660       // Improve reaching-def info.  Occasionally post-alloc's liveness gives


 664       // advantage of this info to set a reaching def for the use-reg.
 665       uint k;
 666       for (k = 1; k < n->req(); k++) {
 667         Node *def = n->in(k);   // n->in(k) is a USE; def is the DEF for this USE
 668         guarantee(def != NULL, "no disconnected nodes at this point");
 669         uint useidx = _lrg_map.live_range_id(def); // useidx is the live range index for this USE
 670 
 671         if( useidx ) {
 672           OptoReg::Name ureg = lrgs(useidx).reg();
 673           if( !value[ureg] ) {
 674             int idx;            // Skip occasional useless copy
 675             while( (idx=def->is_Copy()) != 0 &&
 676                    def->in(idx) != NULL &&  // NULL should not happen
 677                    ureg == lrgs(_lrg_map.live_range_id(def->in(idx))).reg())
 678               def = def->in(idx);
 679             Node *valdef = skip_copies(def); // tighten up val through non-useless copies
 680             value.map(ureg,valdef); // record improved reaching-def info
 681             regnd.map(ureg,   def);
 682             // Record other half of doubles
 683             uint def_ideal_reg = def->ideal_reg();
 684             int n_regs = RegMask::num_registers(def_ideal_reg, lrgs(_lrg_map.live_range_id(def)));
 685             for (int l = 1; l < n_regs; l++) {
 686               OptoReg::Name ureg_lo = OptoReg::add(ureg,-l);
 687               if (!value[ureg_lo] &&
 688                   (!RegMask::can_represent(ureg_lo) ||
 689                    lrgs(useidx).mask().Member(ureg_lo))) { // Nearly always adjacent
 690                 value.map(ureg_lo,valdef); // record improved reaching-def info
 691                 regnd.map(ureg_lo,   def);
 692               }
 693             }
 694           }
 695         }
 696       }
 697 
 698       const uint two_adr = n->is_Mach() ? n->as_Mach()->two_adr() : 0;
 699 
 700       // Remove copies along input edges
 701       for (k = 1; k < n->req(); k++) {
 702         j -= elide_copy(n, k, block, value, regnd, two_adr != k);
 703       }
 704 


 708         continue;
 709       }
 710 
 711       // Update the register defined by this instruction
 712       OptoReg::Name nreg = lrgs(lidx).reg();
 713       // Skip through all copies to the _value_ being defined.
 714       // Do not change from int to pointer
 715       Node *val = skip_copies(n);
 716 
 717       // Clear out a dead definition before starting so that the
 718       // elimination code doesn't have to guard against it.  The
 719       // definition could in fact be a kill projection with a count of
 720       // 0 which is safe but since those are uninteresting for copy
 721       // elimination just delete them as well.
 722       if (regnd[nreg] != NULL && regnd[nreg]->outcnt() == 0) {
 723         regnd.map(nreg, NULL);
 724         value.map(nreg, NULL);
 725       }
 726 
 727       uint n_ideal_reg = n->ideal_reg();
 728       int n_regs = RegMask::num_registers(n_ideal_reg, lrgs(lidx));
 729       if (n_regs == 1) {
 730         // If Node 'n' does not change the value mapped by the register,
 731         // then 'n' is a useless copy.  Do not update the register->node
 732         // mapping so 'n' will go dead.
 733         if( value[nreg] != val ) {
 734           if (eliminate_copy_of_constant(val, n, block, value, regnd, nreg, OptoReg::Bad)) {
 735             j -= replace_and_yank_if_dead(n, nreg, block, value, regnd);
 736           } else {
 737             // Update the mapping: record new Node defined by the register
 738             regnd.map(nreg,n);
 739             // Update mapping for defined *value*, which is the defined
 740             // Node after skipping all copies.
 741             value.map(nreg,val);
 742           }
 743         } else if( !may_be_copy_of_callee(n) ) {
 744           assert(n->is_Copy(), "");
 745           j -= replace_and_yank_if_dead(n, nreg, block, value, regnd);
 746         }
 747       } else if (RegMask::is_vector(n_ideal_reg)) {
 748         // If Node 'n' does not change the value mapped by the register,


< prev index next >