1 /* 2 * Copyright (c) 2003, 2016, Oracle and/or its affiliates. All rights reserved. 3 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. 4 * 5 * This code is free software; you can redistribute it and/or modify it 6 * under the terms of the GNU General Public License version 2 only, as 7 * published by the Free Software Foundation. 8 * 9 * This code is distributed in the hope that it will be useful, but WITHOUT 10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License 12 * version 2 for more details (a copy is included in the LICENSE file that 13 * accompanied this code). 14 * 15 * You should have received a copy of the GNU General Public License version 16 * 2 along with this work; if not, write to the Free Software Foundation, 17 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. 18 * 19 * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA 20 * or visit www.oracle.com if you need additional information or have any 21 * questions. 22 * 23 */ 24 25 #include "precompiled.hpp" 26 #include "classfile/systemDictionary.hpp" 27 #include "classfile/vmSymbols.hpp" 28 #include "memory/resourceArea.hpp" 29 #include "oops/oop.inline.hpp" 30 #include "runtime/interfaceSupport.hpp" 31 #include "runtime/java.hpp" 32 #include "runtime/javaCalls.hpp" 33 #include "runtime/mutex.hpp" 34 #include "runtime/mutexLocker.hpp" 35 #include "services/lowMemoryDetector.hpp" 36 #include "services/management.hpp" 37 38 volatile bool LowMemoryDetector::_enabled_for_collected_pools = false; 39 volatile jint LowMemoryDetector::_disabled_count = 0; 40 41 bool LowMemoryDetector::has_pending_requests() { 42 assert(Service_lock->owned_by_self(), "Must own Service_lock"); 43 bool has_requests = false; 44 int num_memory_pools = MemoryService::num_memory_pools(); 45 for (int i = 0; i < num_memory_pools; i++) { 46 MemoryPool* pool = MemoryService::get_memory_pool(i); 47 SensorInfo* sensor = pool->usage_sensor(); 48 if (sensor != NULL) { 49 has_requests = has_requests || sensor->has_pending_requests(); 50 } 51 52 SensorInfo* gc_sensor = pool->gc_usage_sensor(); 53 if (gc_sensor != NULL) { 54 has_requests = has_requests || gc_sensor->has_pending_requests(); 55 } 56 } 57 return has_requests; 58 } 59 60 void LowMemoryDetector::process_sensor_changes(TRAPS) { 61 ResourceMark rm(THREAD); 62 HandleMark hm(THREAD); 63 64 // No need to hold Service_lock to call out to Java 65 int num_memory_pools = MemoryService::num_memory_pools(); 66 for (int i = 0; i < num_memory_pools; i++) { 67 MemoryPool* pool = MemoryService::get_memory_pool(i); 68 SensorInfo* sensor = pool->usage_sensor(); 69 SensorInfo* gc_sensor = pool->gc_usage_sensor(); 70 if (sensor != NULL && sensor->has_pending_requests()) { 71 sensor->process_pending_requests(CHECK); 72 } 73 if (gc_sensor != NULL && gc_sensor->has_pending_requests()) { 74 gc_sensor->process_pending_requests(CHECK); 75 } 76 } 77 } 78 79 // This method could be called from any Java threads 80 // and also VMThread. 81 void LowMemoryDetector::detect_low_memory() { 82 MutexLockerEx ml(Service_lock, Mutex::_no_safepoint_check_flag); 83 84 bool has_pending_requests = false; 85 int num_memory_pools = MemoryService::num_memory_pools(); 86 for (int i = 0; i < num_memory_pools; i++) { 87 MemoryPool* pool = MemoryService::get_memory_pool(i); 88 SensorInfo* sensor = pool->usage_sensor(); 89 if (sensor != NULL && 90 pool->usage_threshold()->is_high_threshold_supported() && 91 pool->usage_threshold()->high_threshold() != 0) { 92 MemoryUsage usage = pool->get_memory_usage(); 93 sensor->set_gauge_sensor_level(usage, 94 pool->usage_threshold()); 95 has_pending_requests = has_pending_requests || sensor->has_pending_requests(); 96 } 97 } 98 99 if (has_pending_requests) { 100 Service_lock->notify_all(); 101 } 102 } 103 104 // This method could be called from any Java threads 105 // and also VMThread. 106 void LowMemoryDetector::detect_low_memory(MemoryPool* pool) { 107 SensorInfo* sensor = pool->usage_sensor(); 108 if (sensor == NULL || 109 !pool->usage_threshold()->is_high_threshold_supported() || 110 pool->usage_threshold()->high_threshold() == 0) { 111 return; 112 } 113 114 { 115 MutexLockerEx ml(Service_lock, Mutex::_no_safepoint_check_flag); 116 117 MemoryUsage usage = pool->get_memory_usage(); 118 sensor->set_gauge_sensor_level(usage, 119 pool->usage_threshold()); 120 if (sensor->has_pending_requests()) { 121 // notify sensor state update 122 Service_lock->notify_all(); 123 } 124 } 125 } 126 127 // Only called by VMThread at GC time 128 void LowMemoryDetector::detect_after_gc_memory(MemoryPool* pool) { 129 SensorInfo* sensor = pool->gc_usage_sensor(); 130 if (sensor == NULL || 131 !pool->gc_usage_threshold()->is_high_threshold_supported() || 132 pool->gc_usage_threshold()->high_threshold() == 0) { 133 return; 134 } 135 136 { 137 MutexLockerEx ml(Service_lock, Mutex::_no_safepoint_check_flag); 138 139 MemoryUsage usage = pool->get_last_collection_usage(); 140 sensor->set_counter_sensor_level(usage, pool->gc_usage_threshold()); 141 142 if (sensor->has_pending_requests()) { 143 // notify sensor state update 144 Service_lock->notify_all(); 145 } 146 } 147 } 148 149 // recompute enabled flag 150 void LowMemoryDetector::recompute_enabled_for_collected_pools() { 151 bool enabled = false; 152 int num_memory_pools = MemoryService::num_memory_pools(); 153 for (int i=0; i<num_memory_pools; i++) { 154 MemoryPool* pool = MemoryService::get_memory_pool(i); 155 if (pool->is_collected_pool() && is_enabled(pool)) { 156 enabled = true; 157 break; 158 } 159 } 160 _enabled_for_collected_pools = enabled; 161 } 162 163 SensorInfo::SensorInfo() { 164 _sensor_obj = NULL; 165 _sensor_on = false; 166 _sensor_count = 0; 167 _pending_trigger_count = 0; 168 _pending_clear_count = 0; 169 } 170 171 // When this method is used, the memory usage is monitored 172 // as a gauge attribute. Sensor notifications (trigger or 173 // clear) is only emitted at the first time it crosses 174 // a threshold. 175 // 176 // High and low thresholds are designed to provide a 177 // hysteresis mechanism to avoid repeated triggering 178 // of notifications when the attribute value makes small oscillations 179 // around the high or low threshold value. 180 // 181 // The sensor will be triggered if: 182 // (1) the usage is crossing above the high threshold and 183 // the sensor is currently off and no pending 184 // trigger requests; or 185 // (2) the usage is crossing above the high threshold and 186 // the sensor will be off (i.e. sensor is currently on 187 // and has pending clear requests). 188 // 189 // Subsequent crossings of the high threshold value do not cause 190 // any triggers unless the usage becomes less than the low threshold. 191 // 192 // The sensor will be cleared if: 193 // (1) the usage is crossing below the low threshold and 194 // the sensor is currently on and no pending 195 // clear requests; or 196 // (2) the usage is crossing below the low threshold and 197 // the sensor will be on (i.e. sensor is currently off 198 // and has pending trigger requests). 199 // 200 // Subsequent crossings of the low threshold value do not cause 201 // any clears unless the usage becomes greater than or equal 202 // to the high threshold. 203 // 204 // If the current level is between high and low threshold, no change. 205 // 206 void SensorInfo::set_gauge_sensor_level(MemoryUsage usage, ThresholdSupport* high_low_threshold) { 207 assert(Service_lock->owned_by_self(), "Must own Service_lock"); 208 assert(high_low_threshold->is_high_threshold_supported(), "just checking"); 209 210 bool is_over_high = high_low_threshold->is_high_threshold_crossed(usage); 211 bool is_below_low = high_low_threshold->is_low_threshold_crossed(usage); 212 213 assert(!(is_over_high && is_below_low), "Can't be both true"); 214 215 if (is_over_high && 216 ((!_sensor_on && _pending_trigger_count == 0) || 217 _pending_clear_count > 0)) { 218 // low memory detected and need to increment the trigger pending count 219 // if the sensor is off or will be off due to _pending_clear_ > 0 220 // Request to trigger the sensor 221 _pending_trigger_count++; 222 _usage = usage; 223 224 if (_pending_clear_count > 0) { 225 // non-zero pending clear requests indicates that there are 226 // pending requests to clear this sensor. 227 // This trigger request needs to clear this clear count 228 // since the resulting sensor flag should be on. 229 _pending_clear_count = 0; 230 } 231 } else if (is_below_low && 232 ((_sensor_on && _pending_clear_count == 0) || 233 (_pending_trigger_count > 0 && _pending_clear_count == 0))) { 234 // memory usage returns below the threshold 235 // Request to clear the sensor if the sensor is on or will be on due to 236 // _pending_trigger_count > 0 and also no clear request 237 _pending_clear_count++; 238 } 239 } 240 241 // When this method is used, the memory usage is monitored as a 242 // simple counter attribute. The sensor will be triggered 243 // whenever the usage is crossing the threshold to keep track 244 // of the number of times the VM detects such a condition occurs. 245 // 246 // High and low thresholds are designed to provide a 247 // hysteresis mechanism to avoid repeated triggering 248 // of notifications when the attribute value makes small oscillations 249 // around the high or low threshold value. 250 // 251 // The sensor will be triggered if: 252 // - the usage is crossing above the high threshold regardless 253 // of the current sensor state. 254 // 255 // The sensor will be cleared if: 256 // (1) the usage is crossing below the low threshold and 257 // the sensor is currently on; or 258 // (2) the usage is crossing below the low threshold and 259 // the sensor will be on (i.e. sensor is currently off 260 // and has pending trigger requests). 261 void SensorInfo::set_counter_sensor_level(MemoryUsage usage, ThresholdSupport* counter_threshold) { 262 assert(Service_lock->owned_by_self(), "Must own Service_lock"); 263 assert(counter_threshold->is_high_threshold_supported(), "just checking"); 264 265 bool is_over_high = counter_threshold->is_high_threshold_crossed(usage); 266 bool is_below_low = counter_threshold->is_low_threshold_crossed(usage); 267 268 assert(!(is_over_high && is_below_low), "Can't be both true"); 269 270 if (is_over_high) { 271 _pending_trigger_count++; 272 _usage = usage; 273 _pending_clear_count = 0; 274 } else if (is_below_low && (_sensor_on || _pending_trigger_count > 0)) { 275 _pending_clear_count++; 276 } 277 } 278 279 void SensorInfo::oops_do(OopClosure* f) { 280 f->do_oop((oop*) &_sensor_obj); 281 } 282 283 void SensorInfo::process_pending_requests(TRAPS) { 284 int pending_count = pending_trigger_count(); 285 if (pending_clear_count() > 0) { 286 clear(pending_count, CHECK); 287 } else { 288 trigger(pending_count, CHECK); 289 } 290 291 } 292 293 void SensorInfo::trigger(int count, TRAPS) { 294 assert(count <= _pending_trigger_count, "just checking"); 295 if (_sensor_obj != NULL) { 296 Klass* k = Management::sun_management_Sensor_klass(CHECK); 297 instanceKlassHandle sensorKlass (THREAD, k); 298 Handle sensor_h(THREAD, _sensor_obj); 299 Handle usage_h = MemoryService::create_MemoryUsage_obj(_usage, CHECK); 300 301 JavaValue result(T_VOID); 302 JavaCallArguments args(sensor_h); 303 args.push_int((int) count); 304 args.push_oop(usage_h); 305 306 JavaCalls::call_virtual(&result, 307 sensorKlass, 308 vmSymbols::trigger_name(), 309 vmSymbols::trigger_method_signature(), 310 &args, 311 CHECK); 312 } 313 314 { 315 // Holds Service_lock and update the sensor state 316 MutexLockerEx ml(Service_lock, Mutex::_no_safepoint_check_flag); 317 assert(_pending_trigger_count > 0, "Must have pending trigger"); 318 _sensor_on = true; 319 _sensor_count += count; 320 _pending_trigger_count = _pending_trigger_count - count; 321 } 322 } 323 324 void SensorInfo::clear(int count, TRAPS) { 325 { 326 // Holds Service_lock and update the sensor state 327 MutexLockerEx ml(Service_lock, Mutex::_no_safepoint_check_flag); 328 if (_pending_clear_count == 0) { 329 // Bail out if we lost a race to set_*_sensor_level() which may have 330 // reactivated the sensor in the meantime because it was triggered again. 331 return; 332 } 333 _sensor_on = false; 334 _sensor_count += count; 335 _pending_clear_count = 0; 336 _pending_trigger_count = _pending_trigger_count - count; 337 } 338 339 if (_sensor_obj != NULL) { 340 Klass* k = Management::sun_management_Sensor_klass(CHECK); 341 instanceKlassHandle sensorKlass (THREAD, k); 342 Handle sensor(THREAD, _sensor_obj); 343 344 JavaValue result(T_VOID); 345 JavaCallArguments args(sensor); 346 args.push_int((int) count); 347 JavaCalls::call_virtual(&result, 348 sensorKlass, 349 vmSymbols::clear_name(), 350 vmSymbols::int_void_signature(), 351 &args, 352 CHECK); 353 } 354 } 355 356 //-------------------------------------------------------------- 357 // Non-product code 358 359 #ifndef PRODUCT 360 void SensorInfo::print() { 361 tty->print_cr("%s count = " SIZE_FORMAT " pending_triggers = %d pending_clears = %d", 362 (_sensor_on ? "on" : "off"), 363 _sensor_count, _pending_trigger_count, _pending_clear_count); 364 } 365 366 #endif // PRODUCT