Code Review for open

Prepared by:dcubed on Thu Oct 17 17:29:38 EDT 2019
Workspace:/work/shared/bug_hunt/8183909/8153224_mach5_for_jdk14/open
Compare against: /work/shared/bug_hunt/8183909/8153224_base_for_jdk14/open
Compare against version:qparent
Summary of changes: 2635 lines changed: 2054 ins; 126 del; 455 mod; 44142 unchg
Patch of changes: open.patch
Bug id: JDK-8153224 : Monitor deflation prolong safepoints
Legend: Modified file
Deleted file
New file

Cdiffs Udiffs Sdiffs Frames Old New Patch Raw src/hotspot/cpu/aarch64/globals_aarch64.hpp

rev 56639 : loosen a couple more counter checks due to races observed in testing; simplify om_release() extraction of mid since list head or cur_mid_in_use is marked; simplify deflate_monitor_list() extraction of mid since there are no parallel deleters due to the safepoint; simplify deflate_monitor_list_using_JT() extraction of mid since list head or cur_mid_in_use is marked; prepend_block_to_lists() - simplify based on David H's comments; does not need load_acquire() or release_store() because of the cmpxchg(); prepend_to_common() - simplify to use mark_next_loop() for m and use mark_list_head() and release_store() for the non-empty list case; add more debugging for "Non-balanced monitor enter/exit" failure mode; fix race in inflate() in the "CASE: neutral" code path; install_displaced_markword_in_object() does not need to clear the header field since that is handled when the ObjectMonitor is moved from the global free list; LSuccess should clear boxReg to set ICC.ZF=1 to avoid depending on existing boxReg contents; update fast_unlock() to detect when object no longer refers to the same ObjectMonitor and take fast path exit instead; clarify fast_lock() code where we detect when object no longer refers to the same ObjectMonitor; add/update comments for movptr() calls where we move a literal into an Address; remove set_owner(); refactor setting of owner field into set_owner_from(2 versions), set_owner_from_BasicLock(), and try_set_owner_from(); the new functions include monitorinflation+owner logging; extract debug code from v2.06 and v2.07 and move to v2.07.debug; change 'jccb' -> 'jcc' and 'jmpb' -> 'jmp' as needed; checkpoint initial version of MacroAssembler::inc_om_ref_count(); update LP64 MacroAssembler::fast_lock() and fast_unlock() to use inc_om_ref_count(); fast_lock() return flag setting logic can use 'testptr(tmpReg, tmpReg)' instead of 'cmpptr(tmpReg, 0)' since that's more efficient; fast_unlock() LSuccess return flag setting logic can use 'testl (boxReg, 0)' instead of 'xorptr(boxReg, boxReg)' since that's more efficient; cleanup "fast-path" vs "fast path" and "slow-path" vs "slow path"; update MacroAssembler::rtm_inflated_locking() to use inc_om_ref_count(); update MacroAssembler::fast_lock() to preserve the flags before decrementing ref_count and restore the flags afterwards; this is more clean than depending on the contents of rax/tmpReg; coleenp CR - refactor async monitor deflation work from ServiceThread::service_thread_entry() to ObjectSynchronizer::deflate_idle_monitors_using_JT(); rehn,eosterlund CR - add support for HandshakeAfterDeflateIdleMonitors for platforms that don't have ObjectMonitor ref_count support implemented in C2 fast_lock() and fast_unlock().
3 lines changed: 3 ins; 0 del; 0 mod; 122 unchg

Cdiffs Udiffs Sdiffs Frames Old New Patch Raw src/hotspot/cpu/arm/globals_arm.hpp

rev 56639 : loosen a couple more counter checks due to races observed in testing; simplify om_release() extraction of mid since list head or cur_mid_in_use is marked; simplify deflate_monitor_list() extraction of mid since there are no parallel deleters due to the safepoint; simplify deflate_monitor_list_using_JT() extraction of mid since list head or cur_mid_in_use is marked; prepend_block_to_lists() - simplify based on David H's comments; does not need load_acquire() or release_store() because of the cmpxchg(); prepend_to_common() - simplify to use mark_next_loop() for m and use mark_list_head() and release_store() for the non-empty list case; add more debugging for "Non-balanced monitor enter/exit" failure mode; fix race in inflate() in the "CASE: neutral" code path; install_displaced_markword_in_object() does not need to clear the header field since that is handled when the ObjectMonitor is moved from the global free list; LSuccess should clear boxReg to set ICC.ZF=1 to avoid depending on existing boxReg contents; update fast_unlock() to detect when object no longer refers to the same ObjectMonitor and take fast path exit instead; clarify fast_lock() code where we detect when object no longer refers to the same ObjectMonitor; add/update comments for movptr() calls where we move a literal into an Address; remove set_owner(); refactor setting of owner field into set_owner_from(2 versions), set_owner_from_BasicLock(), and try_set_owner_from(); the new functions include monitorinflation+owner logging; extract debug code from v2.06 and v2.07 and move to v2.07.debug; change 'jccb' -> 'jcc' and 'jmpb' -> 'jmp' as needed; checkpoint initial version of MacroAssembler::inc_om_ref_count(); update LP64 MacroAssembler::fast_lock() and fast_unlock() to use inc_om_ref_count(); fast_lock() return flag setting logic can use 'testptr(tmpReg, tmpReg)' instead of 'cmpptr(tmpReg, 0)' since that's more efficient; fast_unlock() LSuccess return flag setting logic can use 'testl (boxReg, 0)' instead of 'xorptr(boxReg, boxReg)' since that's more efficient; cleanup "fast-path" vs "fast path" and "slow-path" vs "slow path"; update MacroAssembler::rtm_inflated_locking() to use inc_om_ref_count(); update MacroAssembler::fast_lock() to preserve the flags before decrementing ref_count and restore the flags afterwards; this is more clean than depending on the contents of rax/tmpReg; coleenp CR - refactor async monitor deflation work from ServiceThread::service_thread_entry() to ObjectSynchronizer::deflate_idle_monitors_using_JT(); rehn,eosterlund CR - add support for HandshakeAfterDeflateIdleMonitors for platforms that don't have ObjectMonitor ref_count support implemented in C2 fast_lock() and fast_unlock().
4 lines changed: 4 ins; 0 del; 0 mod; 86 unchg

Cdiffs Udiffs Sdiffs Frames Old New Patch Raw src/hotspot/cpu/ppc/globals_ppc.hpp

rev 56639 : loosen a couple more counter checks due to races observed in testing; simplify om_release() extraction of mid since list head or cur_mid_in_use is marked; simplify deflate_monitor_list() extraction of mid since there are no parallel deleters due to the safepoint; simplify deflate_monitor_list_using_JT() extraction of mid since list head or cur_mid_in_use is marked; prepend_block_to_lists() - simplify based on David H's comments; does not need load_acquire() or release_store() because of the cmpxchg(); prepend_to_common() - simplify to use mark_next_loop() for m and use mark_list_head() and release_store() for the non-empty list case; add more debugging for "Non-balanced monitor enter/exit" failure mode; fix race in inflate() in the "CASE: neutral" code path; install_displaced_markword_in_object() does not need to clear the header field since that is handled when the ObjectMonitor is moved from the global free list; LSuccess should clear boxReg to set ICC.ZF=1 to avoid depending on existing boxReg contents; update fast_unlock() to detect when object no longer refers to the same ObjectMonitor and take fast path exit instead; clarify fast_lock() code where we detect when object no longer refers to the same ObjectMonitor; add/update comments for movptr() calls where we move a literal into an Address; remove set_owner(); refactor setting of owner field into set_owner_from(2 versions), set_owner_from_BasicLock(), and try_set_owner_from(); the new functions include monitorinflation+owner logging; extract debug code from v2.06 and v2.07 and move to v2.07.debug; change 'jccb' -> 'jcc' and 'jmpb' -> 'jmp' as needed; checkpoint initial version of MacroAssembler::inc_om_ref_count(); update LP64 MacroAssembler::fast_lock() and fast_unlock() to use inc_om_ref_count(); fast_lock() return flag setting logic can use 'testptr(tmpReg, tmpReg)' instead of 'cmpptr(tmpReg, 0)' since that's more efficient; fast_unlock() LSuccess return flag setting logic can use 'testl (boxReg, 0)' instead of 'xorptr(boxReg, boxReg)' since that's more efficient; cleanup "fast-path" vs "fast path" and "slow-path" vs "slow path"; update MacroAssembler::rtm_inflated_locking() to use inc_om_ref_count(); update MacroAssembler::fast_lock() to preserve the flags before decrementing ref_count and restore the flags afterwards; this is more clean than depending on the contents of rax/tmpReg; coleenp CR - refactor async monitor deflation work from ServiceThread::service_thread_entry() to ObjectSynchronizer::deflate_idle_monitors_using_JT(); rehn,eosterlund CR - add support for HandshakeAfterDeflateIdleMonitors for platforms that don't have ObjectMonitor ref_count support implemented in C2 fast_lock() and fast_unlock().
3 lines changed: 3 ins; 0 del; 0 mod; 206 unchg

Cdiffs Udiffs Sdiffs Frames Old New Patch Raw src/hotspot/cpu/s390/globals_s390.hpp

rev 56639 : loosen a couple more counter checks due to races observed in testing; simplify om_release() extraction of mid since list head or cur_mid_in_use is marked; simplify deflate_monitor_list() extraction of mid since there are no parallel deleters due to the safepoint; simplify deflate_monitor_list_using_JT() extraction of mid since list head or cur_mid_in_use is marked; prepend_block_to_lists() - simplify based on David H's comments; does not need load_acquire() or release_store() because of the cmpxchg(); prepend_to_common() - simplify to use mark_next_loop() for m and use mark_list_head() and release_store() for the non-empty list case; add more debugging for "Non-balanced monitor enter/exit" failure mode; fix race in inflate() in the "CASE: neutral" code path; install_displaced_markword_in_object() does not need to clear the header field since that is handled when the ObjectMonitor is moved from the global free list; LSuccess should clear boxReg to set ICC.ZF=1 to avoid depending on existing boxReg contents; update fast_unlock() to detect when object no longer refers to the same ObjectMonitor and take fast path exit instead; clarify fast_lock() code where we detect when object no longer refers to the same ObjectMonitor; add/update comments for movptr() calls where we move a literal into an Address; remove set_owner(); refactor setting of owner field into set_owner_from(2 versions), set_owner_from_BasicLock(), and try_set_owner_from(); the new functions include monitorinflation+owner logging; extract debug code from v2.06 and v2.07 and move to v2.07.debug; change 'jccb' -> 'jcc' and 'jmpb' -> 'jmp' as needed; checkpoint initial version of MacroAssembler::inc_om_ref_count(); update LP64 MacroAssembler::fast_lock() and fast_unlock() to use inc_om_ref_count(); fast_lock() return flag setting logic can use 'testptr(tmpReg, tmpReg)' instead of 'cmpptr(tmpReg, 0)' since that's more efficient; fast_unlock() LSuccess return flag setting logic can use 'testl (boxReg, 0)' instead of 'xorptr(boxReg, boxReg)' since that's more efficient; cleanup "fast-path" vs "fast path" and "slow-path" vs "slow path"; update MacroAssembler::rtm_inflated_locking() to use inc_om_ref_count(); update MacroAssembler::fast_lock() to preserve the flags before decrementing ref_count and restore the flags afterwards; this is more clean than depending on the contents of rax/tmpReg; coleenp CR - refactor async monitor deflation work from ServiceThread::service_thread_entry() to ObjectSynchronizer::deflate_idle_monitors_using_JT(); rehn,eosterlund CR - add support for HandshakeAfterDeflateIdleMonitors for platforms that don't have ObjectMonitor ref_count support implemented in C2 fast_lock() and fast_unlock().
3 lines changed: 3 ins; 0 del; 0 mod; 127 unchg

Cdiffs Udiffs Sdiffs Frames Old New Patch Raw src/hotspot/cpu/sparc/globalDefinitions_sparc.hpp

rev 56637 : Add OM_CACHE_LINE_SIZE so that ObjectMonitor cache line sizes can be experimented with independently of DEFAULT_CACHE_LINE_SIZE; for SPARC and X64 configs that use 128 for DEFAULT_CACHE_LINE_SIZE, we are experimenting with 64; move _previous_owner_tid and _allocation_state fields to share the cache line with ObjectMonitor::_header; put ObjectMonitor::_ref_count on its own cache line after _owner; add 'int* count_p' parameter to deflate_monitor_list() and deflate_monitor_list_using_JT() and push counter updates down to where the ObjectMonitors are actually removed from the in-use lists; monitors_iterate() async deflation check should use negative ref_count; add 'JavaThread* target' param to deflate_per_thread_idle_monitors_using_JT() add deflate_common_idle_monitors_using_JT() to make it clear which JavaThread* is the target of the work and which is the calling JavaThread* (self); g_free_list, g_om_in_use_list and g_om_in_use_count are now static to synchronizer.cpp (reduce scope); add more diagnostic info to some assert()'s; minor code cleanups and code motion; save_om_ptr() should detect a race with a deflating thread that is bailing out and cause a retry when the ref_count field is not positive; merge with jdk-14+11; add special GC support for TestHumongousClassLoader.java; merge with 8230184.patch; merge with jdk-14+14; merge with jdk-14+18.
2 lines changed: 2 ins; 0 del; 0 mod; 60 unchg

Cdiffs Udiffs Sdiffs Frames Old New Patch Raw src/hotspot/cpu/sparc/globals_sparc.hpp

rev 56639 : loosen a couple more counter checks due to races observed in testing; simplify om_release() extraction of mid since list head or cur_mid_in_use is marked; simplify deflate_monitor_list() extraction of mid since there are no parallel deleters due to the safepoint; simplify deflate_monitor_list_using_JT() extraction of mid since list head or cur_mid_in_use is marked; prepend_block_to_lists() - simplify based on David H's comments; does not need load_acquire() or release_store() because of the cmpxchg(); prepend_to_common() - simplify to use mark_next_loop() for m and use mark_list_head() and release_store() for the non-empty list case; add more debugging for "Non-balanced monitor enter/exit" failure mode; fix race in inflate() in the "CASE: neutral" code path; install_displaced_markword_in_object() does not need to clear the header field since that is handled when the ObjectMonitor is moved from the global free list; LSuccess should clear boxReg to set ICC.ZF=1 to avoid depending on existing boxReg contents; update fast_unlock() to detect when object no longer refers to the same ObjectMonitor and take fast path exit instead; clarify fast_lock() code where we detect when object no longer refers to the same ObjectMonitor; add/update comments for movptr() calls where we move a literal into an Address; remove set_owner(); refactor setting of owner field into set_owner_from(2 versions), set_owner_from_BasicLock(), and try_set_owner_from(); the new functions include monitorinflation+owner logging; extract debug code from v2.06 and v2.07 and move to v2.07.debug; change 'jccb' -> 'jcc' and 'jmpb' -> 'jmp' as needed; checkpoint initial version of MacroAssembler::inc_om_ref_count(); update LP64 MacroAssembler::fast_lock() and fast_unlock() to use inc_om_ref_count(); fast_lock() return flag setting logic can use 'testptr(tmpReg, tmpReg)' instead of 'cmpptr(tmpReg, 0)' since that's more efficient; fast_unlock() LSuccess return flag setting logic can use 'testl (boxReg, 0)' instead of 'xorptr(boxReg, boxReg)' since that's more efficient; cleanup "fast-path" vs "fast path" and "slow-path" vs "slow path"; update MacroAssembler::rtm_inflated_locking() to use inc_om_ref_count(); update MacroAssembler::fast_lock() to preserve the flags before decrementing ref_count and restore the flags afterwards; this is more clean than depending on the contents of rax/tmpReg; coleenp CR - refactor async monitor deflation work from ServiceThread::service_thread_entry() to ObjectSynchronizer::deflate_idle_monitors_using_JT(); rehn,eosterlund CR - add support for HandshakeAfterDeflateIdleMonitors for platforms that don't have ObjectMonitor ref_count support implemented in C2 fast_lock() and fast_unlock().
3 lines changed: 3 ins; 0 del; 0 mod; 135 unchg

Cdiffs Udiffs Sdiffs Frames Old New Patch Raw src/hotspot/cpu/x86/globalDefinitions_x86.hpp

rev 56637 : Add OM_CACHE_LINE_SIZE so that ObjectMonitor cache line sizes can be experimented with independently of DEFAULT_CACHE_LINE_SIZE; for SPARC and X64 configs that use 128 for DEFAULT_CACHE_LINE_SIZE, we are experimenting with 64; move _previous_owner_tid and _allocation_state fields to share the cache line with ObjectMonitor::_header; put ObjectMonitor::_ref_count on its own cache line after _owner; add 'int* count_p' parameter to deflate_monitor_list() and deflate_monitor_list_using_JT() and push counter updates down to where the ObjectMonitors are actually removed from the in-use lists; monitors_iterate() async deflation check should use negative ref_count; add 'JavaThread* target' param to deflate_per_thread_idle_monitors_using_JT() add deflate_common_idle_monitors_using_JT() to make it clear which JavaThread* is the target of the work and which is the calling JavaThread* (self); g_free_list, g_om_in_use_list and g_om_in_use_count are now static to synchronizer.cpp (reduce scope); add more diagnostic info to some assert()'s; minor code cleanups and code motion; save_om_ptr() should detect a race with a deflating thread that is bailing out and cause a retry when the ref_count field is not positive; merge with jdk-14+11; add special GC support for TestHumongousClassLoader.java; merge with 8230184.patch; merge with jdk-14+14; merge with jdk-14+18.
2 lines changed: 2 ins; 0 del; 0 mod; 72 unchg

Cdiffs Udiffs Sdiffs Frames Old New Patch Raw src/hotspot/cpu/x86/globals_x86.hpp

rev 56639 : loosen a couple more counter checks due to races observed in testing; simplify om_release() extraction of mid since list head or cur_mid_in_use is marked; simplify deflate_monitor_list() extraction of mid since there are no parallel deleters due to the safepoint; simplify deflate_monitor_list_using_JT() extraction of mid since list head or cur_mid_in_use is marked; prepend_block_to_lists() - simplify based on David H's comments; does not need load_acquire() or release_store() because of the cmpxchg(); prepend_to_common() - simplify to use mark_next_loop() for m and use mark_list_head() and release_store() for the non-empty list case; add more debugging for "Non-balanced monitor enter/exit" failure mode; fix race in inflate() in the "CASE: neutral" code path; install_displaced_markword_in_object() does not need to clear the header field since that is handled when the ObjectMonitor is moved from the global free list; LSuccess should clear boxReg to set ICC.ZF=1 to avoid depending on existing boxReg contents; update fast_unlock() to detect when object no longer refers to the same ObjectMonitor and take fast path exit instead; clarify fast_lock() code where we detect when object no longer refers to the same ObjectMonitor; add/update comments for movptr() calls where we move a literal into an Address; remove set_owner(); refactor setting of owner field into set_owner_from(2 versions), set_owner_from_BasicLock(), and try_set_owner_from(); the new functions include monitorinflation+owner logging; extract debug code from v2.06 and v2.07 and move to v2.07.debug; change 'jccb' -> 'jcc' and 'jmpb' -> 'jmp' as needed; checkpoint initial version of MacroAssembler::inc_om_ref_count(); update LP64 MacroAssembler::fast_lock() and fast_unlock() to use inc_om_ref_count(); fast_lock() return flag setting logic can use 'testptr(tmpReg, tmpReg)' instead of 'cmpptr(tmpReg, 0)' since that's more efficient; fast_unlock() LSuccess return flag setting logic can use 'testl (boxReg, 0)' instead of 'xorptr(boxReg, boxReg)' since that's more efficient; cleanup "fast-path" vs "fast path" and "slow-path" vs "slow path"; update MacroAssembler::rtm_inflated_locking() to use inc_om_ref_count(); update MacroAssembler::fast_lock() to preserve the flags before decrementing ref_count and restore the flags afterwards; this is more clean than depending on the contents of rax/tmpReg; coleenp CR - refactor async monitor deflation work from ServiceThread::service_thread_entry() to ObjectSynchronizer::deflate_idle_monitors_using_JT(); rehn,eosterlund CR - add support for HandshakeAfterDeflateIdleMonitors for platforms that don't have ObjectMonitor ref_count support implemented in C2 fast_lock() and fast_unlock().
11 lines changed: 11 ins; 0 del; 0 mod; 225 unchg

Cdiffs Udiffs Sdiffs Frames Old New Patch Raw src/hotspot/cpu/x86/macroAssembler_x86.cpp

rev 56635 : v2.00 -> v2.05 (CR5/v2.05/8-for-jdk13) patches combined into one; merge with 8229212.patch; merge with jdk-14+11; merge with 8230184.patch; merge with 8230876.patch; merge with jdk-14+15; merge with jdk-14+18.
rev 56639 : loosen a couple more counter checks due to races observed in testing; simplify om_release() extraction of mid since list head or cur_mid_in_use is marked; simplify deflate_monitor_list() extraction of mid since there are no parallel deleters due to the safepoint; simplify deflate_monitor_list_using_JT() extraction of mid since list head or cur_mid_in_use is marked; prepend_block_to_lists() - simplify based on David H's comments; does not need load_acquire() or release_store() because of the cmpxchg(); prepend_to_common() - simplify to use mark_next_loop() for m and use mark_list_head() and release_store() for the non-empty list case; add more debugging for "Non-balanced monitor enter/exit" failure mode; fix race in inflate() in the "CASE: neutral" code path; install_displaced_markword_in_object() does not need to clear the header field since that is handled when the ObjectMonitor is moved from the global free list; LSuccess should clear boxReg to set ICC.ZF=1 to avoid depending on existing boxReg contents; update fast_unlock() to detect when object no longer refers to the same ObjectMonitor and take fast path exit instead; clarify fast_lock() code where we detect when object no longer refers to the same ObjectMonitor; add/update comments for movptr() calls where we move a literal into an Address; remove set_owner(); refactor setting of owner field into set_owner_from(2 versions), set_owner_from_BasicLock(), and try_set_owner_from(); the new functions include monitorinflation+owner logging; extract debug code from v2.06 and v2.07 and move to v2.07.debug; change 'jccb' -> 'jcc' and 'jmpb' -> 'jmp' as needed; checkpoint initial version of MacroAssembler::inc_om_ref_count(); update LP64 MacroAssembler::fast_lock() and fast_unlock() to use inc_om_ref_count(); fast_lock() return flag setting logic can use 'testptr(tmpReg, tmpReg)' instead of 'cmpptr(tmpReg, 0)' since that's more efficient; fast_unlock() LSuccess return flag setting logic can use 'testl (boxReg, 0)' instead of 'xorptr(boxReg, boxReg)' since that's more efficient; cleanup "fast-path" vs "fast path" and "slow-path" vs "slow path"; update MacroAssembler::rtm_inflated_locking() to use inc_om_ref_count(); update MacroAssembler::fast_lock() to preserve the flags before decrementing ref_count and restore the flags afterwards; this is more clean than depending on the contents of rax/tmpReg; coleenp CR - refactor async monitor deflation work from ServiceThread::service_thread_entry() to ObjectSynchronizer::deflate_idle_monitors_using_JT(); rehn,eosterlund CR - add support for HandshakeAfterDeflateIdleMonitors for platforms that don't have ObjectMonitor ref_count support implemented in C2 fast_lock() and fast_unlock().
145 lines changed: 114 ins; 3 del; 28 mod; 9983 unchg

Cdiffs Udiffs Sdiffs Frames Old New Patch Raw src/hotspot/cpu/x86/macroAssembler_x86.hpp

rev 56639 : loosen a couple more counter checks due to races observed in testing; simplify om_release() extraction of mid since list head or cur_mid_in_use is marked; simplify deflate_monitor_list() extraction of mid since there are no parallel deleters due to the safepoint; simplify deflate_monitor_list_using_JT() extraction of mid since list head or cur_mid_in_use is marked; prepend_block_to_lists() - simplify based on David H's comments; does not need load_acquire() or release_store() because of the cmpxchg(); prepend_to_common() - simplify to use mark_next_loop() for m and use mark_list_head() and release_store() for the non-empty list case; add more debugging for "Non-balanced monitor enter/exit" failure mode; fix race in inflate() in the "CASE: neutral" code path; install_displaced_markword_in_object() does not need to clear the header field since that is handled when the ObjectMonitor is moved from the global free list; LSuccess should clear boxReg to set ICC.ZF=1 to avoid depending on existing boxReg contents; update fast_unlock() to detect when object no longer refers to the same ObjectMonitor and take fast path exit instead; clarify fast_lock() code where we detect when object no longer refers to the same ObjectMonitor; add/update comments for movptr() calls where we move a literal into an Address; remove set_owner(); refactor setting of owner field into set_owner_from(2 versions), set_owner_from_BasicLock(), and try_set_owner_from(); the new functions include monitorinflation+owner logging; extract debug code from v2.06 and v2.07 and move to v2.07.debug; change 'jccb' -> 'jcc' and 'jmpb' -> 'jmp' as needed; checkpoint initial version of MacroAssembler::inc_om_ref_count(); update LP64 MacroAssembler::fast_lock() and fast_unlock() to use inc_om_ref_count(); fast_lock() return flag setting logic can use 'testptr(tmpReg, tmpReg)' instead of 'cmpptr(tmpReg, 0)' since that's more efficient; fast_unlock() LSuccess return flag setting logic can use 'testl (boxReg, 0)' instead of 'xorptr(boxReg, boxReg)' since that's more efficient; cleanup "fast-path" vs "fast path" and "slow-path" vs "slow path"; update MacroAssembler::rtm_inflated_locking() to use inc_om_ref_count(); update MacroAssembler::fast_lock() to preserve the flags before decrementing ref_count and restore the flags afterwards; this is more clean than depending on the contents of rax/tmpReg; coleenp CR - refactor async monitor deflation work from ServiceThread::service_thread_entry() to ObjectSynchronizer::deflate_idle_monitors_using_JT(); rehn,eosterlund CR - add support for HandshakeAfterDeflateIdleMonitors for platforms that don't have ObjectMonitor ref_count support implemented in C2 fast_lock() and fast_unlock().
1 line changed: 1 ins; 0 del; 0 mod; 1832 unchg

Cdiffs Udiffs Sdiffs Frames Old New Patch Raw src/hotspot/cpu/zero/globals_zero.hpp

rev 56639 : loosen a couple more counter checks due to races observed in testing; simplify om_release() extraction of mid since list head or cur_mid_in_use is marked; simplify deflate_monitor_list() extraction of mid since there are no parallel deleters due to the safepoint; simplify deflate_monitor_list_using_JT() extraction of mid since list head or cur_mid_in_use is marked; prepend_block_to_lists() - simplify based on David H's comments; does not need load_acquire() or release_store() because of the cmpxchg(); prepend_to_common() - simplify to use mark_next_loop() for m and use mark_list_head() and release_store() for the non-empty list case; add more debugging for "Non-balanced monitor enter/exit" failure mode; fix race in inflate() in the "CASE: neutral" code path; install_displaced_markword_in_object() does not need to clear the header field since that is handled when the ObjectMonitor is moved from the global free list; LSuccess should clear boxReg to set ICC.ZF=1 to avoid depending on existing boxReg contents; update fast_unlock() to detect when object no longer refers to the same ObjectMonitor and take fast path exit instead; clarify fast_lock() code where we detect when object no longer refers to the same ObjectMonitor; add/update comments for movptr() calls where we move a literal into an Address; remove set_owner(); refactor setting of owner field into set_owner_from(2 versions), set_owner_from_BasicLock(), and try_set_owner_from(); the new functions include monitorinflation+owner logging; extract debug code from v2.06 and v2.07 and move to v2.07.debug; change 'jccb' -> 'jcc' and 'jmpb' -> 'jmp' as needed; checkpoint initial version of MacroAssembler::inc_om_ref_count(); update LP64 MacroAssembler::fast_lock() and fast_unlock() to use inc_om_ref_count(); fast_lock() return flag setting logic can use 'testptr(tmpReg, tmpReg)' instead of 'cmpptr(tmpReg, 0)' since that's more efficient; fast_unlock() LSuccess return flag setting logic can use 'testl (boxReg, 0)' instead of 'xorptr(boxReg, boxReg)' since that's more efficient; cleanup "fast-path" vs "fast path" and "slow-path" vs "slow path"; update MacroAssembler::rtm_inflated_locking() to use inc_om_ref_count(); update MacroAssembler::fast_lock() to preserve the flags before decrementing ref_count and restore the flags afterwards; this is more clean than depending on the contents of rax/tmpReg; coleenp CR - refactor async monitor deflation work from ServiceThread::service_thread_entry() to ObjectSynchronizer::deflate_idle_monitors_using_JT(); rehn,eosterlund CR - add support for HandshakeAfterDeflateIdleMonitors for platforms that don't have ObjectMonitor ref_count support implemented in C2 fast_lock() and fast_unlock().
3 lines changed: 3 ins; 0 del; 0 mod; 97 unchg

Cdiffs Udiffs Sdiffs Frames Old New Patch Raw src/hotspot/share/logging/logTag.hpp

rev 56639 : loosen a couple more counter checks due to races observed in testing; simplify om_release() extraction of mid since list head or cur_mid_in_use is marked; simplify deflate_monitor_list() extraction of mid since there are no parallel deleters due to the safepoint; simplify deflate_monitor_list_using_JT() extraction of mid since list head or cur_mid_in_use is marked; prepend_block_to_lists() - simplify based on David H's comments; does not need load_acquire() or release_store() because of the cmpxchg(); prepend_to_common() - simplify to use mark_next_loop() for m and use mark_list_head() and release_store() for the non-empty list case; add more debugging for "Non-balanced monitor enter/exit" failure mode; fix race in inflate() in the "CASE: neutral" code path; install_displaced_markword_in_object() does not need to clear the header field since that is handled when the ObjectMonitor is moved from the global free list; LSuccess should clear boxReg to set ICC.ZF=1 to avoid depending on existing boxReg contents; update fast_unlock() to detect when object no longer refers to the same ObjectMonitor and take fast path exit instead; clarify fast_lock() code where we detect when object no longer refers to the same ObjectMonitor; add/update comments for movptr() calls where we move a literal into an Address; remove set_owner(); refactor setting of owner field into set_owner_from(2 versions), set_owner_from_BasicLock(), and try_set_owner_from(); the new functions include monitorinflation+owner logging; extract debug code from v2.06 and v2.07 and move to v2.07.debug; change 'jccb' -> 'jcc' and 'jmpb' -> 'jmp' as needed; checkpoint initial version of MacroAssembler::inc_om_ref_count(); update LP64 MacroAssembler::fast_lock() and fast_unlock() to use inc_om_ref_count(); fast_lock() return flag setting logic can use 'testptr(tmpReg, tmpReg)' instead of 'cmpptr(tmpReg, 0)' since that's more efficient; fast_unlock() LSuccess return flag setting logic can use 'testl (boxReg, 0)' instead of 'xorptr(boxReg, boxReg)' since that's more efficient; cleanup "fast-path" vs "fast path" and "slow-path" vs "slow path"; update MacroAssembler::rtm_inflated_locking() to use inc_om_ref_count(); update MacroAssembler::fast_lock() to preserve the flags before decrementing ref_count and restore the flags afterwards; this is more clean than depending on the contents of rax/tmpReg; coleenp CR - refactor async monitor deflation work from ServiceThread::service_thread_entry() to ObjectSynchronizer::deflate_idle_monitors_using_JT(); rehn,eosterlund CR - add support for HandshakeAfterDeflateIdleMonitors for platforms that don't have ObjectMonitor ref_count support implemented in C2 fast_lock() and fast_unlock().
1 line changed: 1 ins; 0 del; 0 mod; 225 unchg

Cdiffs Udiffs Sdiffs Frames Old New Patch Raw src/hotspot/share/oops/markWord.hpp

rev 56635 : v2.00 -> v2.05 (CR5/v2.05/8-for-jdk13) patches combined into one; merge with 8229212.patch; merge with jdk-14+11; merge with 8230184.patch; merge with 8230876.patch; merge with jdk-14+15; merge with jdk-14+18.
4 lines changed: 4 ins; 0 del; 0 mod; 426 unchg

Cdiffs Udiffs Sdiffs Frames Old New Patch Raw src/hotspot/share/prims/jvm.cpp

rev 56635 : v2.00 -> v2.05 (CR5/v2.05/8-for-jdk13) patches combined into one; merge with 8229212.patch; merge with jdk-14+11; merge with 8230184.patch; merge with 8230876.patch; merge with jdk-14+15; merge with jdk-14+18.
6 lines changed: 6 ins; 0 del; 0 mod; 3695 unchg

Cdiffs Udiffs Sdiffs Frames Old New Patch Raw src/hotspot/share/prims/whitebox.cpp

rev 56637 : Add OM_CACHE_LINE_SIZE so that ObjectMonitor cache line sizes can be experimented with independently of DEFAULT_CACHE_LINE_SIZE; for SPARC and X64 configs that use 128 for DEFAULT_CACHE_LINE_SIZE, we are experimenting with 64; move _previous_owner_tid and _allocation_state fields to share the cache line with ObjectMonitor::_header; put ObjectMonitor::_ref_count on its own cache line after _owner; add 'int* count_p' parameter to deflate_monitor_list() and deflate_monitor_list_using_JT() and push counter updates down to where the ObjectMonitors are actually removed from the in-use lists; monitors_iterate() async deflation check should use negative ref_count; add 'JavaThread* target' param to deflate_per_thread_idle_monitors_using_JT() add deflate_common_idle_monitors_using_JT() to make it clear which JavaThread* is the target of the work and which is the calling JavaThread* (self); g_free_list, g_om_in_use_list and g_om_in_use_count are now static to synchronizer.cpp (reduce scope); add more diagnostic info to some assert()'s; minor code cleanups and code motion; save_om_ptr() should detect a race with a deflating thread that is bailing out and cause a retry when the ref_count field is not positive; merge with jdk-14+11; add special GC support for TestHumongousClassLoader.java; merge with 8230184.patch; merge with jdk-14+14; merge with jdk-14+18.
13 lines changed: 13 ins; 0 del; 0 mod; 2414 unchg

Cdiffs Udiffs Sdiffs Frames Old New Patch Raw src/hotspot/share/runtime/basicLock.cpp

rev 56635 : v2.00 -> v2.05 (CR5/v2.05/8-for-jdk13) patches combined into one; merge with 8229212.patch; merge with jdk-14+11; merge with 8230184.patch; merge with 8230876.patch; merge with jdk-14+15; merge with jdk-14+18.
5 lines changed: 4 ins; 0 del; 1 mod; 77 unchg

Cdiffs Udiffs Sdiffs Frames Old New Patch Raw src/hotspot/share/runtime/globals.hpp

rev 56635 : v2.00 -> v2.05 (CR5/v2.05/8-for-jdk13) patches combined into one; merge with 8229212.patch; merge with jdk-14+11; merge with 8230184.patch; merge with 8230876.patch; merge with jdk-14+15; merge with jdk-14+18.
rev 56638 : Merge the remainder of the lock-free monitor list changes from v2.06 with v2.06a and v2.06b after running the changes through the edit scripts; merge pieces from dcubed.monitor_deflate_conc.v2.06d in dcubed.monitor_deflate_conc.v2.06[ac]; merge pieces from dcubed.monitor_deflate_conc.v2.06e into dcubed.monitor_deflate_conc.v2.06c; merge with jdk-14+11; test work around for test/jdk/tools/jlink/multireleasejar/JLinkMultiReleaseJarTest.java should not been needed anymore; merge with jdk-14+18.
rev 56639 : loosen a couple more counter checks due to races observed in testing; simplify om_release() extraction of mid since list head or cur_mid_in_use is marked; simplify deflate_monitor_list() extraction of mid since there are no parallel deleters due to the safepoint; simplify deflate_monitor_list_using_JT() extraction of mid since list head or cur_mid_in_use is marked; prepend_block_to_lists() - simplify based on David H's comments; does not need load_acquire() or release_store() because of the cmpxchg(); prepend_to_common() - simplify to use mark_next_loop() for m and use mark_list_head() and release_store() for the non-empty list case; add more debugging for "Non-balanced monitor enter/exit" failure mode; fix race in inflate() in the "CASE: neutral" code path; install_displaced_markword_in_object() does not need to clear the header field since that is handled when the ObjectMonitor is moved from the global free list; LSuccess should clear boxReg to set ICC.ZF=1 to avoid depending on existing boxReg contents; update fast_unlock() to detect when object no longer refers to the same ObjectMonitor and take fast path exit instead; clarify fast_lock() code where we detect when object no longer refers to the same ObjectMonitor; add/update comments for movptr() calls where we move a literal into an Address; remove set_owner(); refactor setting of owner field into set_owner_from(2 versions), set_owner_from_BasicLock(), and try_set_owner_from(); the new functions include monitorinflation+owner logging; extract debug code from v2.06 and v2.07 and move to v2.07.debug; change 'jccb' -> 'jcc' and 'jmpb' -> 'jmp' as needed; checkpoint initial version of MacroAssembler::inc_om_ref_count(); update LP64 MacroAssembler::fast_lock() and fast_unlock() to use inc_om_ref_count(); fast_lock() return flag setting logic can use 'testptr(tmpReg, tmpReg)' instead of 'cmpptr(tmpReg, 0)' since that's more efficient; fast_unlock() LSuccess return flag setting logic can use 'testl (boxReg, 0)' instead of 'xorptr(boxReg, boxReg)' since that's more efficient; cleanup "fast-path" vs "fast path" and "slow-path" vs "slow path"; update MacroAssembler::rtm_inflated_locking() to use inc_om_ref_count(); update MacroAssembler::fast_lock() to preserve the flags before decrementing ref_count and restore the flags afterwards; this is more clean than depending on the contents of rax/tmpReg; coleenp CR - refactor async monitor deflation work from ServiceThread::service_thread_entry() to ObjectSynchronizer::deflate_idle_monitors_using_JT(); rehn,eosterlund CR - add support for HandshakeAfterDeflateIdleMonitors for platforms that don't have ObjectMonitor ref_count support implemented in C2 fast_lock() and fast_unlock().
18 lines changed: 14 ins; 0 del; 4 mod; 2484 unchg

Cdiffs Udiffs Sdiffs Frames Old New Patch Raw src/hotspot/share/runtime/objectMonitor.cpp

rev 56634 : imported patch 8230876.patch
rev 56635 : v2.00 -> v2.05 (CR5/v2.05/8-for-jdk13) patches combined into one; merge with 8229212.patch; merge with jdk-14+11; merge with 8230184.patch; merge with 8230876.patch; merge with jdk-14+15; merge with jdk-14+18.
rev 56637 : Add OM_CACHE_LINE_SIZE so that ObjectMonitor cache line sizes can be experimented with independently of DEFAULT_CACHE_LINE_SIZE; for SPARC and X64 configs that use 128 for DEFAULT_CACHE_LINE_SIZE, we are experimenting with 64; move _previous_owner_tid and _allocation_state fields to share the cache line with ObjectMonitor::_header; put ObjectMonitor::_ref_count on its own cache line after _owner; add 'int* count_p' parameter to deflate_monitor_list() and deflate_monitor_list_using_JT() and push counter updates down to where the ObjectMonitors are actually removed from the in-use lists; monitors_iterate() async deflation check should use negative ref_count; add 'JavaThread* target' param to deflate_per_thread_idle_monitors_using_JT() add deflate_common_idle_monitors_using_JT() to make it clear which JavaThread* is the target of the work and which is the calling JavaThread* (self); g_free_list, g_om_in_use_list and g_om_in_use_count are now static to synchronizer.cpp (reduce scope); add more diagnostic info to some assert()'s; minor code cleanups and code motion; save_om_ptr() should detect a race with a deflating thread that is bailing out and cause a retry when the ref_count field is not positive; merge with jdk-14+11; add special GC support for TestHumongousClassLoader.java; merge with 8230184.patch; merge with jdk-14+14; merge with jdk-14+18.
rev 56639 : loosen a couple more counter checks due to races observed in testing; simplify om_release() extraction of mid since list head or cur_mid_in_use is marked; simplify deflate_monitor_list() extraction of mid since there are no parallel deleters due to the safepoint; simplify deflate_monitor_list_using_JT() extraction of mid since list head or cur_mid_in_use is marked; prepend_block_to_lists() - simplify based on David H's comments; does not need load_acquire() or release_store() because of the cmpxchg(); prepend_to_common() - simplify to use mark_next_loop() for m and use mark_list_head() and release_store() for the non-empty list case; add more debugging for "Non-balanced monitor enter/exit" failure mode; fix race in inflate() in the "CASE: neutral" code path; install_displaced_markword_in_object() does not need to clear the header field since that is handled when the ObjectMonitor is moved from the global free list; LSuccess should clear boxReg to set ICC.ZF=1 to avoid depending on existing boxReg contents; update fast_unlock() to detect when object no longer refers to the same ObjectMonitor and take fast path exit instead; clarify fast_lock() code where we detect when object no longer refers to the same ObjectMonitor; add/update comments for movptr() calls where we move a literal into an Address; remove set_owner(); refactor setting of owner field into set_owner_from(2 versions), set_owner_from_BasicLock(), and try_set_owner_from(); the new functions include monitorinflation+owner logging; extract debug code from v2.06 and v2.07 and move to v2.07.debug; change 'jccb' -> 'jcc' and 'jmpb' -> 'jmp' as needed; checkpoint initial version of MacroAssembler::inc_om_ref_count(); update LP64 MacroAssembler::fast_lock() and fast_unlock() to use inc_om_ref_count(); fast_lock() return flag setting logic can use 'testptr(tmpReg, tmpReg)' instead of 'cmpptr(tmpReg, 0)' since that's more efficient; fast_unlock() LSuccess return flag setting logic can use 'testl (boxReg, 0)' instead of 'xorptr(boxReg, boxReg)' since that's more efficient; cleanup "fast-path" vs "fast path" and "slow-path" vs "slow path"; update MacroAssembler::rtm_inflated_locking() to use inc_om_ref_count(); update MacroAssembler::fast_lock() to preserve the flags before decrementing ref_count and restore the flags afterwards; this is more clean than depending on the contents of rax/tmpReg; coleenp CR - refactor async monitor deflation work from ServiceThread::service_thread_entry() to ObjectSynchronizer::deflate_idle_monitors_using_JT(); rehn,eosterlund CR - add support for HandshakeAfterDeflateIdleMonitors for platforms that don't have ObjectMonitor ref_count support implemented in C2 fast_lock() and fast_unlock().
346 lines changed: 310 ins; 5 del; 31 mod; 1908 unchg

Cdiffs Udiffs Sdiffs Frames Old New Patch Raw src/hotspot/share/runtime/objectMonitor.hpp

rev 56634 : imported patch 8230876.patch
rev 56635 : v2.00 -> v2.05 (CR5/v2.05/8-for-jdk13) patches combined into one; merge with 8229212.patch; merge with jdk-14+11; merge with 8230184.patch; merge with 8230876.patch; merge with jdk-14+15; merge with jdk-14+18.
rev 56637 : Add OM_CACHE_LINE_SIZE so that ObjectMonitor cache line sizes can be experimented with independently of DEFAULT_CACHE_LINE_SIZE; for SPARC and X64 configs that use 128 for DEFAULT_CACHE_LINE_SIZE, we are experimenting with 64; move _previous_owner_tid and _allocation_state fields to share the cache line with ObjectMonitor::_header; put ObjectMonitor::_ref_count on its own cache line after _owner; add 'int* count_p' parameter to deflate_monitor_list() and deflate_monitor_list_using_JT() and push counter updates down to where the ObjectMonitors are actually removed from the in-use lists; monitors_iterate() async deflation check should use negative ref_count; add 'JavaThread* target' param to deflate_per_thread_idle_monitors_using_JT() add deflate_common_idle_monitors_using_JT() to make it clear which JavaThread* is the target of the work and which is the calling JavaThread* (self); g_free_list, g_om_in_use_list and g_om_in_use_count are now static to synchronizer.cpp (reduce scope); add more diagnostic info to some assert()'s; minor code cleanups and code motion; save_om_ptr() should detect a race with a deflating thread that is bailing out and cause a retry when the ref_count field is not positive; merge with jdk-14+11; add special GC support for TestHumongousClassLoader.java; merge with 8230184.patch; merge with jdk-14+14; merge with jdk-14+18.
rev 56638 : Merge the remainder of the lock-free monitor list changes from v2.06 with v2.06a and v2.06b after running the changes through the edit scripts; merge pieces from dcubed.monitor_deflate_conc.v2.06d in dcubed.monitor_deflate_conc.v2.06[ac]; merge pieces from dcubed.monitor_deflate_conc.v2.06e into dcubed.monitor_deflate_conc.v2.06c; merge with jdk-14+11; test work around for test/jdk/tools/jlink/multireleasejar/JLinkMultiReleaseJarTest.java should not been needed anymore; merge with jdk-14+18.
rev 56639 : loosen a couple more counter checks due to races observed in testing; simplify om_release() extraction of mid since list head or cur_mid_in_use is marked; simplify deflate_monitor_list() extraction of mid since there are no parallel deleters due to the safepoint; simplify deflate_monitor_list_using_JT() extraction of mid since list head or cur_mid_in_use is marked; prepend_block_to_lists() - simplify based on David H's comments; does not need load_acquire() or release_store() because of the cmpxchg(); prepend_to_common() - simplify to use mark_next_loop() for m and use mark_list_head() and release_store() for the non-empty list case; add more debugging for "Non-balanced monitor enter/exit" failure mode; fix race in inflate() in the "CASE: neutral" code path; install_displaced_markword_in_object() does not need to clear the header field since that is handled when the ObjectMonitor is moved from the global free list; LSuccess should clear boxReg to set ICC.ZF=1 to avoid depending on existing boxReg contents; update fast_unlock() to detect when object no longer refers to the same ObjectMonitor and take fast path exit instead; clarify fast_lock() code where we detect when object no longer refers to the same ObjectMonitor; add/update comments for movptr() calls where we move a literal into an Address; remove set_owner(); refactor setting of owner field into set_owner_from(2 versions), set_owner_from_BasicLock(), and try_set_owner_from(); the new functions include monitorinflation+owner logging; extract debug code from v2.06 and v2.07 and move to v2.07.debug; change 'jccb' -> 'jcc' and 'jmpb' -> 'jmp' as needed; checkpoint initial version of MacroAssembler::inc_om_ref_count(); update LP64 MacroAssembler::fast_lock() and fast_unlock() to use inc_om_ref_count(); fast_lock() return flag setting logic can use 'testptr(tmpReg, tmpReg)' instead of 'cmpptr(tmpReg, 0)' since that's more efficient; fast_unlock() LSuccess return flag setting logic can use 'testl (boxReg, 0)' instead of 'xorptr(boxReg, boxReg)' since that's more efficient; cleanup "fast-path" vs "fast path" and "slow-path" vs "slow path"; update MacroAssembler::rtm_inflated_locking() to use inc_om_ref_count(); update MacroAssembler::fast_lock() to preserve the flags before decrementing ref_count and restore the flags afterwards; this is more clean than depending on the contents of rax/tmpReg; coleenp CR - refactor async monitor deflation work from ServiceThread::service_thread_entry() to ObjectSynchronizer::deflate_idle_monitors_using_JT(); rehn,eosterlund CR - add support for HandshakeAfterDeflateIdleMonitors for platforms that don't have ObjectMonitor ref_count support implemented in C2 fast_lock() and fast_unlock().
108 lines changed: 91 ins; 0 del; 17 mod; 296 unchg

Cdiffs Udiffs Sdiffs Frames Old New Patch Raw src/hotspot/share/runtime/objectMonitor.inline.hpp

rev 56634 : imported patch 8230876.patch
rev 56635 : v2.00 -> v2.05 (CR5/v2.05/8-for-jdk13) patches combined into one; merge with 8229212.patch; merge with jdk-14+11; merge with 8230184.patch; merge with 8230876.patch; merge with jdk-14+15; merge with jdk-14+18.
rev 56639 : loosen a couple more counter checks due to races observed in testing; simplify om_release() extraction of mid since list head or cur_mid_in_use is marked; simplify deflate_monitor_list() extraction of mid since there are no parallel deleters due to the safepoint; simplify deflate_monitor_list_using_JT() extraction of mid since list head or cur_mid_in_use is marked; prepend_block_to_lists() - simplify based on David H's comments; does not need load_acquire() or release_store() because of the cmpxchg(); prepend_to_common() - simplify to use mark_next_loop() for m and use mark_list_head() and release_store() for the non-empty list case; add more debugging for "Non-balanced monitor enter/exit" failure mode; fix race in inflate() in the "CASE: neutral" code path; install_displaced_markword_in_object() does not need to clear the header field since that is handled when the ObjectMonitor is moved from the global free list; LSuccess should clear boxReg to set ICC.ZF=1 to avoid depending on existing boxReg contents; update fast_unlock() to detect when object no longer refers to the same ObjectMonitor and take fast path exit instead; clarify fast_lock() code where we detect when object no longer refers to the same ObjectMonitor; add/update comments for movptr() calls where we move a literal into an Address; remove set_owner(); refactor setting of owner field into set_owner_from(2 versions), set_owner_from_BasicLock(), and try_set_owner_from(); the new functions include monitorinflation+owner logging; extract debug code from v2.06 and v2.07 and move to v2.07.debug; change 'jccb' -> 'jcc' and 'jmpb' -> 'jmp' as needed; checkpoint initial version of MacroAssembler::inc_om_ref_count(); update LP64 MacroAssembler::fast_lock() and fast_unlock() to use inc_om_ref_count(); fast_lock() return flag setting logic can use 'testptr(tmpReg, tmpReg)' instead of 'cmpptr(tmpReg, 0)' since that's more efficient; fast_unlock() LSuccess return flag setting logic can use 'testl (boxReg, 0)' instead of 'xorptr(boxReg, boxReg)' since that's more efficient; cleanup "fast-path" vs "fast path" and "slow-path" vs "slow path"; update MacroAssembler::rtm_inflated_locking() to use inc_om_ref_count(); update MacroAssembler::fast_lock() to preserve the flags before decrementing ref_count and restore the flags afterwards; this is more clean than depending on the contents of rax/tmpReg; coleenp CR - refactor async monitor deflation work from ServiceThread::service_thread_entry() to ObjectSynchronizer::deflate_idle_monitors_using_JT(); rehn,eosterlund CR - add support for HandshakeAfterDeflateIdleMonitors for platforms that don't have ObjectMonitor ref_count support implemented in C2 fast_lock() and fast_unlock().
141 lines changed: 134 ins; 4 del; 3 mod; 84 unchg

Cdiffs Udiffs Sdiffs Frames Old New Patch Raw src/hotspot/share/runtime/safepoint.cpp

rev 56635 : v2.00 -> v2.05 (CR5/v2.05/8-for-jdk13) patches combined into one; merge with 8229212.patch; merge with jdk-14+11; merge with 8230184.patch; merge with 8230876.patch; merge with jdk-14+15; merge with jdk-14+18.
12 lines changed: 9 ins; 0 del; 3 mod; 1298 unchg

Cdiffs Udiffs Sdiffs Frames Old New Patch Raw src/hotspot/share/runtime/serviceThread.cpp

rev 56635 : v2.00 -> v2.05 (CR5/v2.05/8-for-jdk13) patches combined into one; merge with 8229212.patch; merge with jdk-14+11; merge with 8230184.patch; merge with 8230876.patch; merge with jdk-14+15; merge with jdk-14+18.
rev 56638 : Merge the remainder of the lock-free monitor list changes from v2.06 with v2.06a and v2.06b after running the changes through the edit scripts; merge pieces from dcubed.monitor_deflate_conc.v2.06d in dcubed.monitor_deflate_conc.v2.06[ac]; merge pieces from dcubed.monitor_deflate_conc.v2.06e into dcubed.monitor_deflate_conc.v2.06c; merge with jdk-14+11; test work around for test/jdk/tools/jlink/multireleasejar/JLinkMultiReleaseJarTest.java should not been needed anymore; merge with jdk-14+18.
rev 56639 : loosen a couple more counter checks due to races observed in testing; simplify om_release() extraction of mid since list head or cur_mid_in_use is marked; simplify deflate_monitor_list() extraction of mid since there are no parallel deleters due to the safepoint; simplify deflate_monitor_list_using_JT() extraction of mid since list head or cur_mid_in_use is marked; prepend_block_to_lists() - simplify based on David H's comments; does not need load_acquire() or release_store() because of the cmpxchg(); prepend_to_common() - simplify to use mark_next_loop() for m and use mark_list_head() and release_store() for the non-empty list case; add more debugging for "Non-balanced monitor enter/exit" failure mode; fix race in inflate() in the "CASE: neutral" code path; install_displaced_markword_in_object() does not need to clear the header field since that is handled when the ObjectMonitor is moved from the global free list; LSuccess should clear boxReg to set ICC.ZF=1 to avoid depending on existing boxReg contents; update fast_unlock() to detect when object no longer refers to the same ObjectMonitor and take fast path exit instead; clarify fast_lock() code where we detect when object no longer refers to the same ObjectMonitor; add/update comments for movptr() calls where we move a literal into an Address; remove set_owner(); refactor setting of owner field into set_owner_from(2 versions), set_owner_from_BasicLock(), and try_set_owner_from(); the new functions include monitorinflation+owner logging; extract debug code from v2.06 and v2.07 and move to v2.07.debug; change 'jccb' -> 'jcc' and 'jmpb' -> 'jmp' as needed; checkpoint initial version of MacroAssembler::inc_om_ref_count(); update LP64 MacroAssembler::fast_lock() and fast_unlock() to use inc_om_ref_count(); fast_lock() return flag setting logic can use 'testptr(tmpReg, tmpReg)' instead of 'cmpptr(tmpReg, 0)' since that's more efficient; fast_unlock() LSuccess return flag setting logic can use 'testl (boxReg, 0)' instead of 'xorptr(boxReg, boxReg)' since that's more efficient; cleanup "fast-path" vs "fast path" and "slow-path" vs "slow path"; update MacroAssembler::rtm_inflated_locking() to use inc_om_ref_count(); update MacroAssembler::fast_lock() to preserve the flags before decrementing ref_count and restore the flags afterwards; this is more clean than depending on the contents of rax/tmpReg; coleenp CR - refactor async monitor deflation work from ServiceThread::service_thread_entry() to ObjectSynchronizer::deflate_idle_monitors_using_JT(); rehn,eosterlund CR - add support for HandshakeAfterDeflateIdleMonitors for platforms that don't have ObjectMonitor ref_count support implemented in C2 fast_lock() and fast_unlock().
11 lines changed: 9 ins; 0 del; 2 mod; 189 unchg

Cdiffs Udiffs Sdiffs Frames Old New Patch Raw src/hotspot/share/runtime/sharedRuntime.cpp

rev 56635 : v2.00 -> v2.05 (CR5/v2.05/8-for-jdk13) patches combined into one; merge with 8229212.patch; merge with jdk-14+11; merge with 8230184.patch; merge with 8230876.patch; merge with jdk-14+15; merge with jdk-14+18.
8 lines changed: 6 ins; 0 del; 2 mod; 3257 unchg

Cdiffs Udiffs Sdiffs Frames Old New Patch Raw src/hotspot/share/runtime/synchronizer.cpp

rev 56634 : imported patch 8230876.patch
rev 56635 : v2.00 -> v2.05 (CR5/v2.05/8-for-jdk13) patches combined into one; merge with 8229212.patch; merge with jdk-14+11; merge with 8230184.patch; merge with 8230876.patch; merge with jdk-14+15; merge with jdk-14+18.
rev 56636 : renames, comment cleanups and additions, whitespace and indent fixes; add PaddedObjectMonitor typdef to make 'PaddedEnd<ObjectMonitor' cleanups easier; add a couple of missing 'private' decls; delete unused next() function; merge pieces from dcubed.monitor_deflate_conc.v2.06d in dcubed.monitor_deflate_conc.v2.06[ac]; merge with 8229212.patch; merge with jdk-14+11; merge with 8230184.patch.
rev 56637 : Add OM_CACHE_LINE_SIZE so that ObjectMonitor cache line sizes can be experimented with independently of DEFAULT_CACHE_LINE_SIZE; for SPARC and X64 configs that use 128 for DEFAULT_CACHE_LINE_SIZE, we are experimenting with 64; move _previous_owner_tid and _allocation_state fields to share the cache line with ObjectMonitor::_header; put ObjectMonitor::_ref_count on its own cache line after _owner; add 'int* count_p' parameter to deflate_monitor_list() and deflate_monitor_list_using_JT() and push counter updates down to where the ObjectMonitors are actually removed from the in-use lists; monitors_iterate() async deflation check should use negative ref_count; add 'JavaThread* target' param to deflate_per_thread_idle_monitors_using_JT() add deflate_common_idle_monitors_using_JT() to make it clear which JavaThread* is the target of the work and which is the calling JavaThread* (self); g_free_list, g_om_in_use_list and g_om_in_use_count are now static to synchronizer.cpp (reduce scope); add more diagnostic info to some assert()'s; minor code cleanups and code motion; save_om_ptr() should detect a race with a deflating thread that is bailing out and cause a retry when the ref_count field is not positive; merge with jdk-14+11; add special GC support for TestHumongousClassLoader.java; merge with 8230184.patch; merge with jdk-14+14; merge with jdk-14+18.
rev 56638 : Merge the remainder of the lock-free monitor list changes from v2.06 with v2.06a and v2.06b after running the changes through the edit scripts; merge pieces from dcubed.monitor_deflate_conc.v2.06d in dcubed.monitor_deflate_conc.v2.06[ac]; merge pieces from dcubed.monitor_deflate_conc.v2.06e into dcubed.monitor_deflate_conc.v2.06c; merge with jdk-14+11; test work around for test/jdk/tools/jlink/multireleasejar/JLinkMultiReleaseJarTest.java should not been needed anymore; merge with jdk-14+18.
rev 56639 : loosen a couple more counter checks due to races observed in testing; simplify om_release() extraction of mid since list head or cur_mid_in_use is marked; simplify deflate_monitor_list() extraction of mid since there are no parallel deleters due to the safepoint; simplify deflate_monitor_list_using_JT() extraction of mid since list head or cur_mid_in_use is marked; prepend_block_to_lists() - simplify based on David H's comments; does not need load_acquire() or release_store() because of the cmpxchg(); prepend_to_common() - simplify to use mark_next_loop() for m and use mark_list_head() and release_store() for the non-empty list case; add more debugging for "Non-balanced monitor enter/exit" failure mode; fix race in inflate() in the "CASE: neutral" code path; install_displaced_markword_in_object() does not need to clear the header field since that is handled when the ObjectMonitor is moved from the global free list; LSuccess should clear boxReg to set ICC.ZF=1 to avoid depending on existing boxReg contents; update fast_unlock() to detect when object no longer refers to the same ObjectMonitor and take fast path exit instead; clarify fast_lock() code where we detect when object no longer refers to the same ObjectMonitor; add/update comments for movptr() calls where we move a literal into an Address; remove set_owner(); refactor setting of owner field into set_owner_from(2 versions), set_owner_from_BasicLock(), and try_set_owner_from(); the new functions include monitorinflation+owner logging; extract debug code from v2.06 and v2.07 and move to v2.07.debug; change 'jccb' -> 'jcc' and 'jmpb' -> 'jmp' as needed; checkpoint initial version of MacroAssembler::inc_om_ref_count(); update LP64 MacroAssembler::fast_lock() and fast_unlock() to use inc_om_ref_count(); fast_lock() return flag setting logic can use 'testptr(tmpReg, tmpReg)' instead of 'cmpptr(tmpReg, 0)' since that's more efficient; fast_unlock() LSuccess return flag setting logic can use 'testl (boxReg, 0)' instead of 'xorptr(boxReg, boxReg)' since that's more efficient; cleanup "fast-path" vs "fast path" and "slow-path" vs "slow path"; update MacroAssembler::rtm_inflated_locking() to use inc_om_ref_count(); update MacroAssembler::fast_lock() to preserve the flags before decrementing ref_count and restore the flags afterwards; this is more clean than depending on the contents of rax/tmpReg; coleenp CR - refactor async monitor deflation work from ServiceThread::service_thread_entry() to ObjectSynchronizer::deflate_idle_monitors_using_JT(); rehn,eosterlund CR - add support for HandshakeAfterDeflateIdleMonitors for platforms that don't have ObjectMonitor ref_count support implemented in C2 fast_lock() and fast_unlock().
1650 lines changed: 1209 ins; 110 del; 331 mod; 1741 unchg

Cdiffs Udiffs Sdiffs Frames Old New Patch Raw src/hotspot/share/runtime/synchronizer.hpp

rev 56635 : v2.00 -> v2.05 (CR5/v2.05/8-for-jdk13) patches combined into one; merge with 8229212.patch; merge with jdk-14+11; merge with 8230184.patch; merge with 8230876.patch; merge with jdk-14+15; merge with jdk-14+18.
rev 56637 : Add OM_CACHE_LINE_SIZE so that ObjectMonitor cache line sizes can be experimented with independently of DEFAULT_CACHE_LINE_SIZE; for SPARC and X64 configs that use 128 for DEFAULT_CACHE_LINE_SIZE, we are experimenting with 64; move _previous_owner_tid and _allocation_state fields to share the cache line with ObjectMonitor::_header; put ObjectMonitor::_ref_count on its own cache line after _owner; add 'int* count_p' parameter to deflate_monitor_list() and deflate_monitor_list_using_JT() and push counter updates down to where the ObjectMonitors are actually removed from the in-use lists; monitors_iterate() async deflation check should use negative ref_count; add 'JavaThread* target' param to deflate_per_thread_idle_monitors_using_JT() add deflate_common_idle_monitors_using_JT() to make it clear which JavaThread* is the target of the work and which is the calling JavaThread* (self); g_free_list, g_om_in_use_list and g_om_in_use_count are now static to synchronizer.cpp (reduce scope); add more diagnostic info to some assert()'s; minor code cleanups and code motion; save_om_ptr() should detect a race with a deflating thread that is bailing out and cause a retry when the ref_count field is not positive; merge with jdk-14+11; add special GC support for TestHumongousClassLoader.java; merge with 8230184.patch; merge with jdk-14+14; merge with jdk-14+18.
rev 56638 : Merge the remainder of the lock-free monitor list changes from v2.06 with v2.06a and v2.06b after running the changes through the edit scripts; merge pieces from dcubed.monitor_deflate_conc.v2.06d in dcubed.monitor_deflate_conc.v2.06[ac]; merge pieces from dcubed.monitor_deflate_conc.v2.06e into dcubed.monitor_deflate_conc.v2.06c; merge with jdk-14+11; test work around for test/jdk/tools/jlink/multireleasejar/JLinkMultiReleaseJarTest.java should not been needed anymore; merge with jdk-14+18.
rev 56639 : loosen a couple more counter checks due to races observed in testing; simplify om_release() extraction of mid since list head or cur_mid_in_use is marked; simplify deflate_monitor_list() extraction of mid since there are no parallel deleters due to the safepoint; simplify deflate_monitor_list_using_JT() extraction of mid since list head or cur_mid_in_use is marked; prepend_block_to_lists() - simplify based on David H's comments; does not need load_acquire() or release_store() because of the cmpxchg(); prepend_to_common() - simplify to use mark_next_loop() for m and use mark_list_head() and release_store() for the non-empty list case; add more debugging for "Non-balanced monitor enter/exit" failure mode; fix race in inflate() in the "CASE: neutral" code path; install_displaced_markword_in_object() does not need to clear the header field since that is handled when the ObjectMonitor is moved from the global free list; LSuccess should clear boxReg to set ICC.ZF=1 to avoid depending on existing boxReg contents; update fast_unlock() to detect when object no longer refers to the same ObjectMonitor and take fast path exit instead; clarify fast_lock() code where we detect when object no longer refers to the same ObjectMonitor; add/update comments for movptr() calls where we move a literal into an Address; remove set_owner(); refactor setting of owner field into set_owner_from(2 versions), set_owner_from_BasicLock(), and try_set_owner_from(); the new functions include monitorinflation+owner logging; extract debug code from v2.06 and v2.07 and move to v2.07.debug; change 'jccb' -> 'jcc' and 'jmpb' -> 'jmp' as needed; checkpoint initial version of MacroAssembler::inc_om_ref_count(); update LP64 MacroAssembler::fast_lock() and fast_unlock() to use inc_om_ref_count(); fast_lock() return flag setting logic can use 'testptr(tmpReg, tmpReg)' instead of 'cmpptr(tmpReg, 0)' since that's more efficient; fast_unlock() LSuccess return flag setting logic can use 'testl (boxReg, 0)' instead of 'xorptr(boxReg, boxReg)' since that's more efficient; cleanup "fast-path" vs "fast path" and "slow-path" vs "slow path"; update MacroAssembler::rtm_inflated_locking() to use inc_om_ref_count(); update MacroAssembler::fast_lock() to preserve the flags before decrementing ref_count and restore the flags afterwards; this is more clean than depending on the contents of rax/tmpReg; coleenp CR - refactor async monitor deflation work from ServiceThread::service_thread_entry() to ObjectSynchronizer::deflate_idle_monitors_using_JT(); rehn,eosterlund CR - add support for HandshakeAfterDeflateIdleMonitors for platforms that don't have ObjectMonitor ref_count support implemented in C2 fast_lock() and fast_unlock().
53 lines changed: 33 ins; 1 del; 19 mod; 196 unchg

Cdiffs Udiffs Sdiffs Frames Old New Patch Raw src/hotspot/share/runtime/thread.cpp

rev 56635 : v2.00 -> v2.05 (CR5/v2.05/8-for-jdk13) patches combined into one; merge with 8229212.patch; merge with jdk-14+11; merge with 8230184.patch; merge with 8230876.patch; merge with jdk-14+15; merge with jdk-14+18.
rev 56638 : Merge the remainder of the lock-free monitor list changes from v2.06 with v2.06a and v2.06b after running the changes through the edit scripts; merge pieces from dcubed.monitor_deflate_conc.v2.06d in dcubed.monitor_deflate_conc.v2.06[ac]; merge pieces from dcubed.monitor_deflate_conc.v2.06e into dcubed.monitor_deflate_conc.v2.06c; merge with jdk-14+11; test work around for test/jdk/tools/jlink/multireleasejar/JLinkMultiReleaseJarTest.java should not been needed anymore; merge with jdk-14+18.
0 lines changed: 0 ins; 0 del; 0 mod; 5013 unchg

Cdiffs Udiffs Sdiffs Frames Old New Patch Raw src/hotspot/share/runtime/thread.hpp

rev 56635 : v2.00 -> v2.05 (CR5/v2.05/8-for-jdk13) patches combined into one; merge with 8229212.patch; merge with jdk-14+11; merge with 8230184.patch; merge with 8230876.patch; merge with jdk-14+15; merge with jdk-14+18.
rev 56637 : Add OM_CACHE_LINE_SIZE so that ObjectMonitor cache line sizes can be experimented with independently of DEFAULT_CACHE_LINE_SIZE; for SPARC and X64 configs that use 128 for DEFAULT_CACHE_LINE_SIZE, we are experimenting with 64; move _previous_owner_tid and _allocation_state fields to share the cache line with ObjectMonitor::_header; put ObjectMonitor::_ref_count on its own cache line after _owner; add 'int* count_p' parameter to deflate_monitor_list() and deflate_monitor_list_using_JT() and push counter updates down to where the ObjectMonitors are actually removed from the in-use lists; monitors_iterate() async deflation check should use negative ref_count; add 'JavaThread* target' param to deflate_per_thread_idle_monitors_using_JT() add deflate_common_idle_monitors_using_JT() to make it clear which JavaThread* is the target of the work and which is the calling JavaThread* (self); g_free_list, g_om_in_use_list and g_om_in_use_count are now static to synchronizer.cpp (reduce scope); add more diagnostic info to some assert()'s; minor code cleanups and code motion; save_om_ptr() should detect a race with a deflating thread that is bailing out and cause a retry when the ref_count field is not positive; merge with jdk-14+11; add special GC support for TestHumongousClassLoader.java; merge with 8230184.patch; merge with jdk-14+14; merge with jdk-14+18.
rev 56638 : Merge the remainder of the lock-free monitor list changes from v2.06 with v2.06a and v2.06b after running the changes through the edit scripts; merge pieces from dcubed.monitor_deflate_conc.v2.06d in dcubed.monitor_deflate_conc.v2.06[ac]; merge pieces from dcubed.monitor_deflate_conc.v2.06e into dcubed.monitor_deflate_conc.v2.06c; merge with jdk-14+11; test work around for test/jdk/tools/jlink/multireleasejar/JLinkMultiReleaseJarTest.java should not been needed anymore; merge with jdk-14+18.
5 lines changed: 0 ins; 1 del; 4 mod; 2305 unchg

Cdiffs Udiffs Sdiffs Frames Old New Patch Raw src/hotspot/share/runtime/vmOperations.cpp

rev 56635 : v2.00 -> v2.05 (CR5/v2.05/8-for-jdk13) patches combined into one; merge with 8229212.patch; merge with jdk-14+11; merge with 8230184.patch; merge with 8230876.patch; merge with jdk-14+15; merge with jdk-14+18.
12 lines changed: 12 ins; 0 del; 0 mod; 523 unchg

Cdiffs Udiffs Sdiffs Frames Old New Patch Raw src/hotspot/share/runtime/vmOperations.hpp

rev 56635 : v2.00 -> v2.05 (CR5/v2.05/8-for-jdk13) patches combined into one; merge with 8229212.patch; merge with jdk-14+11; merge with 8230184.patch; merge with 8230876.patch; merge with jdk-14+15; merge with jdk-14+18.
1 line changed: 1 ins; 0 del; 0 mod; 523 unchg

Cdiffs Udiffs Sdiffs Frames Old New Patch Raw src/hotspot/share/runtime/vmStructs.cpp

rev 56635 : v2.00 -> v2.05 (CR5/v2.05/8-for-jdk13) patches combined into one; merge with 8229212.patch; merge with jdk-14+11; merge with 8230184.patch; merge with 8230876.patch; merge with jdk-14+15; merge with jdk-14+18.
rev 56637 : Add OM_CACHE_LINE_SIZE so that ObjectMonitor cache line sizes can be experimented with independently of DEFAULT_CACHE_LINE_SIZE; for SPARC and X64 configs that use 128 for DEFAULT_CACHE_LINE_SIZE, we are experimenting with 64; move _previous_owner_tid and _allocation_state fields to share the cache line with ObjectMonitor::_header; put ObjectMonitor::_ref_count on its own cache line after _owner; add 'int* count_p' parameter to deflate_monitor_list() and deflate_monitor_list_using_JT() and push counter updates down to where the ObjectMonitors are actually removed from the in-use lists; monitors_iterate() async deflation check should use negative ref_count; add 'JavaThread* target' param to deflate_per_thread_idle_monitors_using_JT() add deflate_common_idle_monitors_using_JT() to make it clear which JavaThread* is the target of the work and which is the calling JavaThread* (self); g_free_list, g_om_in_use_list and g_om_in_use_count are now static to synchronizer.cpp (reduce scope); add more diagnostic info to some assert()'s; minor code cleanups and code motion; save_om_ptr() should detect a race with a deflating thread that is bailing out and cause a retry when the ref_count field is not positive; merge with jdk-14+11; add special GC support for TestHumongousClassLoader.java; merge with 8230184.patch; merge with jdk-14+14; merge with jdk-14+18.
rev 56638 : Merge the remainder of the lock-free monitor list changes from v2.06 with v2.06a and v2.06b after running the changes through the edit scripts; merge pieces from dcubed.monitor_deflate_conc.v2.06d in dcubed.monitor_deflate_conc.v2.06[ac]; merge pieces from dcubed.monitor_deflate_conc.v2.06e into dcubed.monitor_deflate_conc.v2.06c; merge with jdk-14+11; test work around for test/jdk/tools/jlink/multireleasejar/JLinkMultiReleaseJarTest.java should not been needed anymore; merge with jdk-14+18.
5 lines changed: 3 ins; 2 del; 0 mod; 3204 unchg

Cdiffs Udiffs Sdiffs Frames Old New Patch Raw src/hotspot/share/runtime/vmThread.cpp

rev 56635 : v2.00 -> v2.05 (CR5/v2.05/8-for-jdk13) patches combined into one; merge with 8229212.patch; merge with jdk-14+11; merge with 8230184.patch; merge with 8230876.patch; merge with jdk-14+15; merge with jdk-14+18.
9 lines changed: 9 ins; 0 del; 0 mod; 788 unchg

Cdiffs Udiffs Sdiffs Frames Old New Patch Raw test/hotspot/gtest/oops/test_markOop.cpp

rev 56635 : v2.00 -> v2.05 (CR5/v2.05/8-for-jdk13) patches combined into one; merge with 8229212.patch; merge with jdk-14+11; merge with 8230184.patch; merge with 8230876.patch; merge with jdk-14+15; merge with jdk-14+18.
16 lines changed: 8 ins; 0 del; 8 mod; 137 unchg

Cdiffs Udiffs Sdiffs Frames Old New Patch Raw test/hotspot/jtreg/runtime/logging/SafepointCleanupTest.java

rev 56635 : v2.00 -> v2.05 (CR5/v2.05/8-for-jdk13) patches combined into one; merge with 8229212.patch; merge with jdk-14+11; merge with 8230184.patch; merge with 8230876.patch; merge with jdk-14+15; merge with jdk-14+18.
26 lines changed: 26 ins; 0 del; 0 mod; 78 unchg

Cdiffs Udiffs Sdiffs Frames Old New Patch Raw test/jdk/java/rmi/server/UnicastRemoteObject/unexportObject/UnexportLeak.java

rev 56635 : v2.00 -> v2.05 (CR5/v2.05/8-for-jdk13) patches combined into one; merge with 8229212.patch; merge with jdk-14+11; merge with 8230184.patch; merge with 8230876.patch; merge with jdk-14+15; merge with jdk-14+18.
5 lines changed: 3 ins; 0 del; 2 mod; 88 unchg

Cdiffs Udiffs Sdiffs Frames Old New Patch Raw test/jdk/tools/jlink/multireleasejar/JLinkMultiReleaseJarTest.java

rev 56635 : v2.00 -> v2.05 (CR5/v2.05/8-for-jdk13) patches combined into one; merge with 8229212.patch; merge with jdk-14+11; merge with 8230184.patch; merge with 8230876.patch; merge with jdk-14+15; merge with jdk-14+18.
rev 56638 : Merge the remainder of the lock-free monitor list changes from v2.06 with v2.06a and v2.06b after running the changes through the edit scripts; merge pieces from dcubed.monitor_deflate_conc.v2.06d in dcubed.monitor_deflate_conc.v2.06[ac]; merge pieces from dcubed.monitor_deflate_conc.v2.06e into dcubed.monitor_deflate_conc.v2.06c; merge with jdk-14+11; test work around for test/jdk/tools/jlink/multireleasejar/JLinkMultiReleaseJarTest.java should not been needed anymore; merge with jdk-14+18.
0 lines changed: 0 ins; 0 del; 0 mod; 248 unchg

This code review page was prepared using /Users/ddaugher/Bin/webrev (vers 25.18-hg+openjdk.java.net).