Module java.desktop

Interface MidiDevice

  • All Superinterfaces:
    AutoCloseable
    All Known Subinterfaces:
    Sequencer, Synthesizer

    public interface MidiDevice
    extends AutoCloseable
    MidiDevice is the base interface for all MIDI devices. Common devices include synthesizers, sequencers, MIDI input ports, and MIDI output ports.

    A MidiDevice can be a transmitter or a receiver of MIDI events, or both. Therefore, it can provide Transmitter or Receiver instances (or both). Typically, MIDI IN ports provide transmitters, MIDI OUT ports and synthesizers provide receivers. A Sequencer typically provides transmitters for playback and receivers for recording.

    A MidiDevice can be opened and closed explicitly as well as implicitly. Explicit opening is accomplished by calling open(), explicit closing is done by calling close() on the MidiDevice instance. If an application opens a MidiDevice explicitly, it has to close it explicitly to free system resources and enable the application to exit cleanly. Implicit opening is done by calling MidiSystem.getReceiver() and MidiSystem.getTransmitter(). The MidiDevice used by MidiSystem.getReceiver and MidiSystem.getTransmitter is implementation-dependent unless the properties javax.sound.midi.Receiver and javax.sound.midi.Transmitter are used (see the description of properties to select default providers in MidiSystem). A MidiDevice that was opened implicitly, is closed implicitly by closing the Receiver or Transmitter that resulted in opening it. If more than one implicitly opening Receiver or Transmitter were obtained by the application, the device is closed after the last Receiver or Transmitter has been closed. On the other hand, calling getReceiver or getTransmitter on the device instance directly does not open the device implicitly. Closing these Transmitters and Receivers does not close the device implicitly. To use a device with Receivers or Transmitters obtained this way, the device has to be opened and closed explicitly.

    If implicit and explicit opening and closing are mixed on the same MidiDevice instance, the following rules apply:

    • After an explicit open (either before or after implicit opens), the device will not be closed by implicit closing. The only way to close an explicitly opened device is an explicit close.
    • An explicit close always closes the device, even if it also has been opened implicitly. A subsequent implicit close has no further effect.
    To detect if a MidiDevice represents a hardware MIDI port, the following programming technique can be used:
    
     MidiDevice device = ...;
     if (!(device instanceof Sequencer) && !(device instanceof Synthesizer)) {
       // we're now sure that device represents a MIDI port
       // ...
     }
     

    A MidiDevice includes a MidiDevice.Info object to provide manufacturer information and so on.

    See Also:
    Synthesizer, Sequencer, Receiver, Transmitter
    • Nested Class Summary

      Nested Classes 
      Modifier and Type Interface Description
      static class  MidiDevice.Info
      A MidiDevice.Info object contains assorted data about a MidiDevice, including its name, the company who created it, and descriptive text.
    • Method Summary

      Modifier and Type Method Description
      void close()
      Closes the device, indicating that the device should now release any system resources it is using.
      MidiDevice.Info getDeviceInfo()
      Obtains information about the device, including its Java class and Strings containing its name, vendor, and description.
      int getMaxReceivers()
      Obtains the maximum number of MIDI IN connections available on this MIDI device for receiving MIDI data.
      int getMaxTransmitters()
      Obtains the maximum number of MIDI OUT connections available on this MIDI device for transmitting MIDI data.
      long getMicrosecondPosition()
      Obtains the current time-stamp of the device, in microseconds.
      Receiver getReceiver()
      Obtains a MIDI IN receiver through which the MIDI device may receive MIDI data.
      List<Receiver> getReceivers()
      Returns all currently active, non-closed receivers connected with this MidiDevice.
      Transmitter getTransmitter()
      Obtains a MIDI OUT connection from which the MIDI device will transmit MIDI data.
      List<Transmitter> getTransmitters()
      Returns all currently active, non-closed transmitters connected with this MidiDevice.
      boolean isOpen()
      Reports whether the device is open.
      void open()
      Opens the device, indicating that it should now acquire any system resources it requires and become operational.
    • Method Detail

      • getDeviceInfo

        MidiDevice.Info getDeviceInfo()
        Obtains information about the device, including its Java class and Strings containing its name, vendor, and description.
        Returns:
        device info
      • open

        void open()
           throws MidiUnavailableException
        Opens the device, indicating that it should now acquire any system resources it requires and become operational.

        An application opening a device explicitly with this call has to close the device by calling close(). This is necessary to release system resources and allow applications to exit cleanly.

        Note that some devices, once closed, cannot be reopened. Attempts to reopen such a device will always result in a MidiUnavailableException.

        Throws:
        MidiUnavailableException - thrown if the device cannot be opened due to resource restrictions
        SecurityException - thrown if the device cannot be opened due to security restrictions
        See Also:
        close(), isOpen()
      • close

        void close()
        Closes the device, indicating that the device should now release any system resources it is using.

        All Receiver and Transmitter instances open from this device are closed. This includes instances retrieved via MidiSystem.

        Specified by:
        close in interface AutoCloseable
        See Also:
        open(), isOpen()
      • isOpen

        boolean isOpen()
        Reports whether the device is open.
        Returns:
        true if the device is open, otherwise false
        See Also:
        open(), close()
      • getMicrosecondPosition

        long getMicrosecondPosition()
        Obtains the current time-stamp of the device, in microseconds. If a device supports time-stamps, it should start counting at 0 when the device is opened and continue incrementing its time-stamp in microseconds until the device is closed. If it does not support time-stamps, it should always return -1.
        Returns:
        the current time-stamp of the device in microseconds, or -1 if time-stamping is not supported by the device
      • getMaxReceivers

        int getMaxReceivers()
        Obtains the maximum number of MIDI IN connections available on this MIDI device for receiving MIDI data.
        Returns:
        maximum number of MIDI IN connections, or -1 if an unlimited number of connections is available
      • getMaxTransmitters

        int getMaxTransmitters()
        Obtains the maximum number of MIDI OUT connections available on this MIDI device for transmitting MIDI data.
        Returns:
        maximum number of MIDI OUT connections, or -1 if an unlimited number of connections is available
      • getReceiver

        Receiver getReceiver()
                      throws MidiUnavailableException
        Obtains a MIDI IN receiver through which the MIDI device may receive MIDI data. The returned receiver must be closed when the application has finished using it.

        Usually the returned receiver implements the MidiDeviceReceiver interface.

        Obtaining a Receiver with this method does not open the device. To be able to use the device, it has to be opened explicitly by calling open(). Also, closing the Receiver does not close the device. It has to be closed explicitly by calling close().

        Returns:
        a receiver for the device
        Throws:
        MidiUnavailableException - thrown if a receiver is not available due to resource restrictions
        See Also:
        Receiver.close()
      • getReceivers

        List<Receiver> getReceivers()
        Returns all currently active, non-closed receivers connected with this MidiDevice. A receiver can be removed from the device by closing it.

        Usually the returned receivers implement the MidiDeviceReceiver interface.

        Returns:
        an unmodifiable list of the open receivers
        Since:
        1.5
      • getTransmitter

        Transmitter getTransmitter()
                            throws MidiUnavailableException
        Obtains a MIDI OUT connection from which the MIDI device will transmit MIDI data. The returned transmitter must be closed when the application has finished using it.

        Usually the returned transmitter implements the MidiDeviceTransmitter interface.

        Obtaining a Transmitter with this method does not open the device. To be able to use the device, it has to be opened explicitly by calling open(). Also, closing the Transmitter does not close the device. It has to be closed explicitly by calling close().

        Returns:
        a MIDI OUT transmitter for the device
        Throws:
        MidiUnavailableException - thrown if a transmitter is not available due to resource restrictions
        See Also:
        Transmitter.close()
      • getTransmitters

        List<Transmitter> getTransmitters()
        Returns all currently active, non-closed transmitters connected with this MidiDevice. A transmitter can be removed from the device by closing it.

        Usually the returned transmitters implement the MidiDeviceTransmitter interface.

        Returns:
        an unmodifiable list of the open transmitters
        Since:
        1.5