Module java.base
Package java.security

Class Signature


public abstract class Signature
extends SignatureSpi
The Signature class is used to provide applications the functionality of a digital signature algorithm. Digital signatures are used for authentication and integrity assurance of digital data.

The signature algorithm can be, among others, the NIST standard DSA, using DSA and SHA-256. The DSA algorithm using the SHA-256 message digest algorithm can be specified as SHA256withDSA. In the case of RSA the signing algorithm could be specified as, for example, SHA256withRSA. The algorithm name must be specified, as there is no default.

A Signature object can be used to generate and verify digital signatures.

There are three phases to the use of a Signature object for either signing data or verifying a signature:

  1. Initialization, with either
  2. Updating

    Depending on the type of initialization, this will update the bytes to be signed or verified. See the update methods.

  3. Signing or Verifying a signature on all updated bytes. See the sign methods and the verify method.

Note that this class is abstract and extends from SignatureSpi for historical reasons. Application developers should only take notice of the methods defined in this Signature class; all the methods in the superclass are intended for cryptographic service providers who wish to supply their own implementations of digital signature algorithms.

Every implementation of the Java platform is required to support the following standard Signature algorithms:

  • SHA1withDSA
  • SHA256withDSA
  • SHA1withRSA
  • SHA256withRSA
These algorithms are described in the Signature section of the Java Security Standard Algorithm Names Specification. Consult the release documentation for your implementation to see if any other algorithms are supported.
Since:
1.1
  • Field Details

    • UNINITIALIZED

      protected static final int UNINITIALIZED
      Possible state value, signifying that this signature object has not yet been initialized.
      See Also:
      Constant Field Values
    • SIGN

      protected static final int SIGN
      Possible state value, signifying that this signature object has been initialized for signing.
      See Also:
      Constant Field Values
    • VERIFY

      protected static final int VERIFY
      Possible state value, signifying that this signature object has been initialized for verification.
      See Also:
      Constant Field Values
    • state

      protected int state
      Current state of this signature object.
  • Constructor Details

  • Method Details

    • getInstance

      public static Signature getInstance​(String algorithm) throws NoSuchAlgorithmException
      Returns a Signature object that implements the specified signature algorithm.

      This method traverses the list of registered security Providers, starting with the most preferred Provider. A new Signature object encapsulating the SignatureSpi implementation from the first Provider that supports the specified algorithm is returned.

      Note that the list of registered providers may be retrieved via the Security.getProviders() method.

      Implementation Note:
      The JDK Reference Implementation additionally uses the jdk.security.provider.preferred Security property to determine the preferred provider order for the specified algorithm. This may be different than the order of providers returned by Security.getProviders().
      Parameters:
      algorithm - the standard name of the algorithm requested. See the Signature section in the Java Security Standard Algorithm Names Specification for information about standard algorithm names.
      Returns:
      the new Signature object
      Throws:
      NoSuchAlgorithmException - if no Provider supports a Signature implementation for the specified algorithm
      NullPointerException - if algorithm is null
      See Also:
      Provider
    • getInstance

      public static Signature getInstance​(String algorithm, String provider) throws NoSuchAlgorithmException, NoSuchProviderException
      Returns a Signature object that implements the specified signature algorithm.

      A new Signature object encapsulating the SignatureSpi implementation from the specified provider is returned. The specified provider must be registered in the security provider list.

      Note that the list of registered providers may be retrieved via the Security.getProviders() method.

      Parameters:
      algorithm - the name of the algorithm requested. See the Signature section in the Java Security Standard Algorithm Names Specification for information about standard algorithm names.
      provider - the name of the provider.
      Returns:
      the new Signature object
      Throws:
      IllegalArgumentException - if the provider name is null or empty
      NoSuchAlgorithmException - if a SignatureSpi implementation for the specified algorithm is not available from the specified provider
      NoSuchProviderException - if the specified provider is not registered in the security provider list
      NullPointerException - if algorithm is null
      See Also:
      Provider
    • getInstance

      public static Signature getInstance​(String algorithm, Provider provider) throws NoSuchAlgorithmException
      Returns a Signature object that implements the specified signature algorithm.

      A new Signature object encapsulating the SignatureSpi implementation from the specified Provider object is returned. Note that the specified Provider object does not have to be registered in the provider list.

      Parameters:
      algorithm - the name of the algorithm requested. See the Signature section in the Java Security Standard Algorithm Names Specification for information about standard algorithm names.
      provider - the provider.
      Returns:
      the new Signature object
      Throws:
      IllegalArgumentException - if the provider is null
      NoSuchAlgorithmException - if a SignatureSpi implementation for the specified algorithm is not available from the specified Provider object
      NullPointerException - if algorithm is null
      Since:
      1.4
      See Also:
      Provider
    • getProvider

      public final Provider getProvider()
      Returns the provider of this signature object.
      Returns:
      the provider of this signature object
    • initVerify

      public final void initVerify​(PublicKey publicKey) throws InvalidKeyException
      Initializes this object for verification. If this method is called again with a different argument, it negates the effect of this call.
      Parameters:
      publicKey - the public key of the identity whose signature is going to be verified.
      Throws:
      InvalidKeyException - if the key is invalid.
    • initVerify

      public final void initVerify​(Certificate certificate) throws InvalidKeyException
      Initializes this object for verification, using the public key from the given certificate.

      If the certificate is of type X.509 and has a key usage extension field marked as critical, and the value of the key usage extension field implies that the public key in the certificate and its corresponding private key are not supposed to be used for digital signatures, an InvalidKeyException is thrown.

      Parameters:
      certificate - the certificate of the identity whose signature is going to be verified.
      Throws:
      InvalidKeyException - if the public key in the certificate is not encoded properly or does not include required parameter information or cannot be used for digital signature purposes.
      Since:
      1.3
    • initSign

      public final void initSign​(PrivateKey privateKey) throws InvalidKeyException
      Initialize this object for signing. If this method is called again with a different argument, it negates the effect of this call.
      Parameters:
      privateKey - the private key of the identity whose signature is going to be generated.
      Throws:
      InvalidKeyException - if the key is invalid.
    • initSign

      public final void initSign​(PrivateKey privateKey, SecureRandom random) throws InvalidKeyException
      Initialize this object for signing. If this method is called again with a different argument, it negates the effect of this call.
      Parameters:
      privateKey - the private key of the identity whose signature is going to be generated.
      random - the source of randomness for this signature.
      Throws:
      InvalidKeyException - if the key is invalid.
    • sign

      public final byte[] sign() throws SignatureException
      Returns the signature bytes of all the data updated. The format of the signature depends on the underlying signature scheme.

      A call to this method resets this signature object to the state it was in when previously initialized for signing via a call to initSign(PrivateKey). That is, the object is reset and available to generate another signature from the same signer, if desired, via new calls to update and sign.

      Returns:
      the signature bytes of the signing operation's result.
      Throws:
      SignatureException - if this signature object is not initialized properly or if this signature algorithm is unable to process the input data provided.
    • sign

      public final int sign​(byte[] outbuf, int offset, int len) throws SignatureException
      Finishes the signature operation and stores the resulting signature bytes in the provided buffer outbuf, starting at offset. The format of the signature depends on the underlying signature scheme.

      This signature object is reset to its initial state (the state it was in after a call to one of the initSign methods) and can be reused to generate further signatures with the same private key.

      Parameters:
      outbuf - buffer for the signature result.
      offset - offset into outbuf where the signature is stored.
      len - number of bytes within outbuf allotted for the signature.
      Returns:
      the number of bytes placed into outbuf.
      Throws:
      SignatureException - if this signature object is not initialized properly, if this signature algorithm is unable to process the input data provided, or if len is less than the actual signature length.
      IllegalArgumentException - if outbuf is null, or offset or len is less than 0, or the sum of offset and len is greater than the length of outbuf.
      Since:
      1.2
    • verify

      public final boolean verify​(byte[] signature) throws SignatureException
      Verifies the passed-in signature.

      A call to this method resets this signature object to the state it was in when previously initialized for verification via a call to initVerify(PublicKey). That is, the object is reset and available to verify another signature from the identity whose public key was specified in the call to initVerify.

      Parameters:
      signature - the signature bytes to be verified.
      Returns:
      true if the signature was verified, false if not.
      Throws:
      SignatureException - if this signature object is not initialized properly, the passed-in signature is improperly encoded or of the wrong type, if this signature algorithm is unable to process the input data provided, etc.
    • verify

      public final boolean verify​(byte[] signature, int offset, int length) throws SignatureException
      Verifies the passed-in signature in the specified array of bytes, starting at the specified offset.

      A call to this method resets this signature object to the state it was in when previously initialized for verification via a call to initVerify(PublicKey). That is, the object is reset and available to verify another signature from the identity whose public key was specified in the call to initVerify.

      Parameters:
      signature - the signature bytes to be verified.
      offset - the offset to start from in the array of bytes.
      length - the number of bytes to use, starting at offset.
      Returns:
      true if the signature was verified, false if not.
      Throws:
      SignatureException - if this signature object is not initialized properly, the passed-in signature is improperly encoded or of the wrong type, if this signature algorithm is unable to process the input data provided, etc.
      IllegalArgumentException - if the signature byte array is null, or the offset or length is less than 0, or the sum of the offset and length is greater than the length of the signature byte array.
      Since:
      1.4
    • update

      public final void update​(byte b) throws SignatureException
      Updates the data to be signed or verified by a byte.
      Parameters:
      b - the byte to use for the update.
      Throws:
      SignatureException - if this signature object is not initialized properly.
    • update

      public final void update​(byte[] data) throws SignatureException
      Updates the data to be signed or verified, using the specified array of bytes.
      Parameters:
      data - the byte array to use for the update.
      Throws:
      SignatureException - if this signature object is not initialized properly.
    • update

      public final void update​(byte[] data, int off, int len) throws SignatureException
      Updates the data to be signed or verified, using the specified array of bytes, starting at the specified offset.
      Parameters:
      data - the array of bytes.
      off - the offset to start from in the array of bytes.
      len - the number of bytes to use, starting at offset.
      Throws:
      SignatureException - if this signature object is not initialized properly.
      IllegalArgumentException - if data is null, or off or len is less than 0, or the sum of off and len is greater than the length of data.
    • update

      public final void update​(ByteBuffer data) throws SignatureException
      Updates the data to be signed or verified using the specified ByteBuffer. Processes the data.remaining() bytes starting at data.position(). Upon return, the buffer's position will be equal to its limit; its limit will not have changed.
      Parameters:
      data - the ByteBuffer
      Throws:
      SignatureException - if this signature object is not initialized properly.
      Since:
      1.5
    • getAlgorithm

      public final String getAlgorithm()
      Returns the name of the algorithm for this signature object.
      Returns:
      the name of the algorithm for this signature object.
    • toString

      public String toString()
      Returns a string representation of this signature object, providing information that includes the state of the object and the name of the algorithm used.
      Overrides:
      toString in class Object
      Returns:
      a string representation of this signature object.
    • setParameter

      @Deprecated public final void setParameter​(String param, Object value) throws InvalidParameterException
      Deprecated.
      Sets the specified algorithm parameter to the specified value. This method supplies a general-purpose mechanism through which it is possible to set the various parameters of this object. A parameter may be any settable parameter for the algorithm, such as a parameter size, or a source of random bits for signature generation (if appropriate), or an indication of whether or not to perform a specific but optional computation. A uniform algorithm-specific naming scheme for each parameter is desirable but left unspecified at this time.
      Parameters:
      param - the string identifier of the parameter.
      value - the parameter value.
      Throws:
      InvalidParameterException - if param is an invalid parameter for this signature algorithm engine, the parameter is already set and cannot be set again, a security exception occurs, and so on.
      See Also:
      getParameter(java.lang.String)
    • setParameter

      public final void setParameter​(AlgorithmParameterSpec params) throws InvalidAlgorithmParameterException
      Initializes this signature engine with the specified parameter set.
      Parameters:
      params - the parameters
      Throws:
      InvalidAlgorithmParameterException - if the given parameters are inappropriate for this signature engine
      See Also:
      getParameters()
    • getParameters

      public final AlgorithmParameters getParameters()
      Returns the parameters used with this signature object.

      If this signature has been previously initialized with parameters (by calling the setParameter method), this method returns the same parameters. If this signature has not been initialized with parameters, this method may return a combination of default and randomly generated parameter values if the underlying signature implementation supports it and can successfully generate them. Otherwise, null is returned.

      Returns:
      the parameters used with this signature, or null
      Since:
      1.4
      See Also:
      setParameter(AlgorithmParameterSpec)
    • getParameter

      @Deprecated public final Object getParameter​(String param) throws InvalidParameterException
      Deprecated.
      Gets the value of the specified algorithm parameter. This method supplies a general-purpose mechanism through which it is possible to get the various parameters of this object. A parameter may be any settable parameter for the algorithm, such as a parameter size, or a source of random bits for signature generation (if appropriate), or an indication of whether or not to perform a specific but optional computation. A uniform algorithm-specific naming scheme for each parameter is desirable but left unspecified at this time.
      Parameters:
      param - the string name of the parameter.
      Returns:
      the object that represents the parameter value, or null if there is none.
      Throws:
      InvalidParameterException - if param is an invalid parameter for this engine, or another exception occurs while trying to get this parameter.
      See Also:
      setParameter(String, Object)
    • clone

      public Object clone() throws CloneNotSupportedException
      Returns a clone if the implementation is cloneable.
      Overrides:
      clone in class SignatureSpi
      Returns:
      a clone if the implementation is cloneable.
      Throws:
      CloneNotSupportedException - if this is called on an implementation that does not support Cloneable.
      See Also:
      Cloneable